remove nvram support from backup script
[openwrt.git] / obsolete-buildroot / make / radvd.mk
1 #############################################################
2 #
3 # radvd
4 #
5 #############################################################
6 RADVD_VERSION:=0.7.2
7 RADVD_SOURCE:=radvd-$(RADVD_VERSION).tar.gz
8 RADVD_SITE:=http://v6web.litech.org/radvd/dist
9 RADVD_DIR:=$(BUILD_DIR)/radvd-$(RADVD_VERSION)
10 RADVD_IPK=$(BUILD_DIR)/radvd_0.7.2-1_mipsel.ipk
11 RADVD_IPK_DIR:=$(BUILD_DIR)/radvd-0.7.2-ipk
12
13 $(DL_DIR)/$(RADVD_SOURCE):
14 $(WGET) -P $(DL_DIR) $(RADVD_SITE)/$(RADVD_SOURCE)
15
16 radvd-source: $(DL_DIR)/$(RADVD_SOURCE)
17
18 $(RADVD_DIR)/.unpacked: $(DL_DIR)/$(RADVD_SOURCE)
19 tar -C $(BUILD_DIR) -zxf $(DL_DIR)/$(RADVD_SOURCE)
20 touch $(RADVD_DIR)/.unpacked
21
22 $(RADVD_DIR)/.configured: $(RADVD_DIR)/.unpacked
23 (cd $(RADVD_DIR); rm -rf config.cache; \
24 $(TARGET_CONFIGURE_OPTS) \
25 CFLAGS="$(TARGET_CFLAGS)" \
26 ./configure \
27 --target=$(GNU_TARGET_NAME) \
28 --host=$(GNU_TARGET_NAME) \
29 --build=$(GNU_HOST_NAME) \
30 --prefix=/usr \
31 --with-logfile=/tmp/radvd.log \
32 --with-pidfile=/tmp/run/radvd.pid \
33 --with-configfile=/etc/radvd.conf \
34 );
35 touch $(RADVD_DIR)/.configured
36
37 $(RADVD_DIR)/radvd: $(RADVD_DIR)/.configured
38 cp $(FLEX_DIR)/libfl.a $(RADVD_DIR)/libfl.a
39 $(MAKE) $(TARGET_CONFIGURE_OPTS) LD=$(TARGET_CC) LDFLAGS=-L. -C $(RADVD_DIR)
40
41 $(RADVD_IPK): $(RADVD_DIR)/radvd
42 mkdir -p $(RADVD_IPK_DIR)/CONTROL $(RADVD_IPK_DIR)/etc $(RADVD_IPK_DIR)/usr/sbin
43 install -m 644 $(OPENWRT_IPK_DIR)/radvd/CONTROL/control $(RADVD_IPK_DIR)/CONTROL/control
44 install -m 755 $(OPENWRT_IPK_DIR)/radvd/CONTROL/postinst $(RADVD_IPK_DIR)/CONTROL/postinst
45 install -m 644 $(OPENWRT_IPK_DIR)/radvd/radvd.conf.example $(RADVD_IPK_DIR)/etc/radvd.conf.example
46 install -m 755 $(RADVD_DIR)/radvd $(RADVD_IPK_DIR)/usr/sbin/
47 install -m 755 $(RADVD_DIR)/radvdump $(RADVD_IPK_DIR)/usr/sbin/
48 $(STRIP) $(RADVD_IPK_DIR)/usr/sbin/radvd
49 $(STRIP) $(RADVD_IPK_DIR)/usr/sbin/radvdump
50 cd $(BUILD_DIR); $(IPKG_BUILD) $(RADVD_IPK_DIR)
51
52 radvd-ipk : uclibc $(FLEX_DIR)/$(FLEX_BINARY) $(RADVD_IPK)
53
54 radvd-clean:
55 -$(MAKE) -C $(RADVD_DIR) clean
56
57 radvd-dirclean:
58 rm -rf $(RADVD_DIR) $(RADVD_IPK_DIR)
59
This page took 0.045618 seconds and 5 git commands to generate.