target/linux/generic-2.6/patches-2.6.23/210-mac80211_include_wireless_dev.patch

   1 Index: linux-2.6.23-rc6/include/linux/ieee80211.h
   2 ===================================================================
   3 --- linux-2.6.23-rc6.orig/include/linux/ieee80211.h     2007-09-21 16:23:52.000000000 +0800
   4 +++ linux-2.6.23-rc6/include/linux/ieee80211.h  2007-09-21 16:24:07.000000000 +0800
   5 @@ -106,6 +106,75 @@
   6  } __attribute__ ((packed));
   7
   8
   9 +struct ieee80211_ht_capability {
  10 +       __le16 capabilities_info;
  11 +       u8 mac_ht_params_info;
  12 +       u8 supported_mcs_set[16];
  13 +       __le16 extended_ht_capability_info;
  14 +       __le32 tx_BF_capability_info;
  15 +       u8 antenna_selection_info;
  16 +}__attribute__ ((packed));
  17 +
  18 +struct ieee80211_ht_additional_info {
  19 +       u8 control_chan;
  20 +       u8 ht_param;
  21 +       __le16 operation_mode;
  22 +       __le16 stbc_param;
  23 +       u8 basic_set[16];
  24 +}__attribute__ ((packed));
  25 +
  26 +
  27 +#define IEEE80211_TSINFO_TYPE(a)       ((a.byte1 & 0x01) >> 0)
  28 +#define IEEE80211_TSINFO_TSID(a)       ((a.byte1 & 0x1E) >> 1)
  29 +#define IEEE80211_TSINFO_DIR(a)                ((a.byte1 & 0x60) >> 5)
  30 +#define IEEE80211_TSINFO_POLICY(a)     ((a.byte1 & 0x80) >> 7 + \
  31 +                                        (a.byte2 & 0x01) << 1)
  32 +#define IEEE80211_TSINFO_AGG(a)                ((a.byte2 & 0x02) >> 1)
  33 +#define IEEE80211_TSINFO_APSD(a)       ((a.byte2 & 0x04) >> 2)
  34 +#define IEEE80211_TSINFO_UP(a)         ((a.byte2 & 0x38) >> 3)
  35 +#define IEEE80211_TSINFO_ACK(a)                ((a.byte2 & 0xC0) >> 6)
  36 +#define IEEE80211_TSINFO_SCHEDULE(a)   ((a.byte3 & 0x01) >> 0)
  37 +
  38 +#define IEEE80211_SET_TSINFO_TYPE(i, d)                (i.byte1 |= (d << 0) & 0x01)
  39 +#define IEEE80211_SET_TSINFO_TSID(i, d)                (i.byte1 |= (d << 1) & 0x1E)
  40 +#define IEEE80211_SET_TSINFO_DIR(i, d)         (i.byte1 |= (d << 5) & 0x60)
  41 +#define IEEE80211_SET_TSINFO_POLICY(i, d)      \
  42 +do {                                           \
  43 +                                               i.byte1 |= (d & 0x01) << 7; \
  44 +                                               i.byte2 |= (d & 0x02) >> 1; \
  45 +} while(0)
  46 +#define IEEE80211_SET_TSINFO_AGG(i, d)         (i.byte2 |= (d << 1) & 0x02)
  47 +#define IEEE80211_SET_TSINFO_APSD(i, d)                (i.byte2 |= (d << 2) & 0x04)
  48 +#define IEEE80211_SET_TSINFO_UP(i, d)          (i.byte2 |= (d << 3) & 0x38)
  49 +#define IEEE80211_SET_TSINFO_ACK(i, d)         (i.byte2 |= (d << 6) & 0xC0)
  50 +#define IEEE80211_SET_TSINFO_SCHEDULE(i, d)    (i.byte3 |= (d << 0) & 0x01)
  51 +
  52 +struct ieee80211_ts_info {
  53 +       u8 byte1;
  54 +       u8 byte2;
  55 +       u8 byte3;
  56 +} __attribute__ ((packed));
  57 +
  58 +struct ieee80211_elem_tspec {
  59 +       struct ieee80211_ts_info ts_info;
  60 +       __le16 nominal_msdu_size;
  61 +       __le16 max_msdu_size;
  62 +       __le32 min_service_interval;
  63 +       __le32 max_service_interval;
  64 +       __le32 inactivity_interval;
  65 +       __le32 suspension_interval;
  66 +       __le32 service_start_time;
  67 +       __le32 min_data_rate;
  68 +       __le32 mean_data_rate;
  69 +       __le32 peak_data_rate;
  70 +       __le32 burst_size;
  71 +       __le32 delay_bound;
  72 +       __le32 min_phy_rate;
  73 +       __le16 surplus_band_allow;
  74 +       __le16 medium_time;
  75 +} __attribute__ ((packed));
  76 +
  77 +
  78  struct ieee80211_mgmt {
  79         __le16 frame_control;
  80         __le16 duration;
  81 @@ -173,9 +242,51 @@
  82                                 struct {
  83                                         u8 action_code;
  84                                         u8 dialog_token;
  85 +                                       u8 variable[0];
  86 +                               } __attribute__ ((packed)) addts_req;
  87 +                               struct {
  88 +                                       u8 action_code;
  89 +                                       u8 dialog_token;
  90 +                                       __le16 status_code;
  91 +                                       u8 variable[0];
  92 +                               } __attribute__ ((packed)) addts_resp;
  93 +                               struct {
  94 +                                       u8 action_code;
  95 +                                       struct ieee80211_ts_info ts_info;
  96 +                                       __le16 reason_code;
  97 +                               } __attribute__ ((packed)) delts;
  98 +                               struct {
  99 +                                       u8 action_code;
 100 +                                       u8 dialog_token;
 101                                         u8 status_code;
 102                                         u8 variable[0];
 103                                 } __attribute__ ((packed)) wme_action;
 104 +                               struct {
 105 +                                       u8 action_code;
 106 +                                       u8 dest[6];
 107 +                                       u8 src[6];
 108 +                                       __le16 capab_info;
 109 +                                       __le16 timeout;
 110 +                                       /* Followed by Supported Rates and
 111 +                                        * Extended Supported Rates */
 112 +                                       u8 variable[0];
 113 +                               } __attribute__ ((packed)) dls_req;
 114 +                               struct {
 115 +                                       u8 action_code;
 116 +                                       __le16 status_code;
 117 +                                       u8 dest[6];
 118 +                                       u8 src[6];
 119 +                                       /* Followed by Capability Information,
 120 +                                        * Supported Rates and Extended
 121 +                                        * Supported Rates */
 122 +                                       u8 variable[0];
 123 +                               } __attribute__ ((packed)) dls_resp;
 124 +                               struct {
 125 +                                       u8 action_code;
 126 +                                       u8 dest[6];
 127 +                                       u8 src[6];
 128 +                                       __le16 reason_code;
 129 +                               } __attribute__ ((packed)) dls_teardown;
 130                                 struct{
 131                                         u8 action_code;
 132                                         u8 element_id;
 133 @@ -184,6 +295,25 @@
 134                                         u8 new_chan;
 135                                         u8 switch_count;
 136                                 } __attribute__((packed)) chan_switch;
 137 +                               struct{
 138 +                                       u8 action_code;
 139 +                                       u8 dialog_token;
 140 +                                       __le16 capab;
 141 +                                       __le16 timeout;
 142 +                                       __le16 start_seq_num;
 143 +                               } __attribute__((packed)) addba_req;
 144 +                               struct{
 145 +                                       u8 action_code;
 146 +                                       u8 dialog_token;
 147 +                                       __le16 status;
 148 +                                       __le16 capab;
 149 +                                       __le16 timeout;
 150 +                               } __attribute__((packed)) addba_resp;
 151 +                               struct{
 152 +                                       u8 action_code;
 153 +                                       __le16 params;
 154 +                                       __le16 reason_code;
 155 +                               }__attribute__((packed)) delba;
 156                         } u;
 157                 } __attribute__ ((packed)) action;
 158         } u;
 159 @@ -270,6 +400,18 @@
 160         WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
 161         WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
 162         WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
 163 +       /* 802.11e */
 164 +       WLAN_STATUS_UNSPECIFIED_QOS = 32,
 165 +       WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33,
 166 +       WLAN_STATUS_ASSOC_DENIED_LOWACK = 34,
 167 +       WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35,
 168 +       WLAN_STATUS_REQUEST_DECLINED = 37,
 169 +       WLAN_STATUS_INVALID_QOS_PARAM = 38,
 170 +       WLAN_STATUS_CHANGE_TSPEC = 39,
 171 +       WLAN_STATUS_WAIT_TS_DELAY = 47,
 172 +       WLAN_STATUS_NO_DIRECT_LINK = 48,
 173 +       WLAN_STATUS_STA_NOT_PRESENT = 49,
 174 +       WLAN_STATUS_STA_NOT_QSTA = 50,
 175  };
 176
 177
 178 @@ -300,9 +442,50 @@
 179         WLAN_REASON_INVALID_RSN_IE_CAP = 22,
 180         WLAN_REASON_IEEE8021X_FAILED = 23,
 181         WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
 182 +       /* 802.11e */
 183 +       WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32,
 184 +       WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33,
 185 +       WLAN_REASON_DISASSOC_LOW_ACK = 34,
 186 +       WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35,
 187 +       WLAN_REASON_QSTA_LEAVE_QBSS = 36,
 188 +       WLAN_REASON_QSTA_NOT_USE = 37,
 189 +       WLAN_REASON_QSTA_REQUIRE_SETUP = 38,
 190 +       WLAN_REASON_QSTA_TIMEOUT = 39,
 191 +       WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45,
 192  };
 193
 194
 195 +/* Category Code */
 196 +enum ieee80211_category {
 197 +       WLAN_CATEGORY_SPECTRUM_MGMT = 0,
 198 +       WLAN_CATEGORY_QOS = 1,
 199 +       WLAN_CATEGORY_DLS = 2,
 200 +       WLAN_CATEGORY_BACK = 3,
 201 +       WLAN_CATEGORY_WMM = 17,
 202 +};
 203 +
 204 +/* QoS Action Code */
 205 +enum ieee80211_qos_actioncode {
 206 +       WLAN_ACTION_QOS_ADDTS_REQ = 0,
 207 +       WLAN_ACTION_QOS_ADDTS_RESP = 1,
 208 +       WLAN_ACTION_QOS_DELTS = 2,
 209 +       WLAN_ACTION_QOS_SCHEDULE = 3,
 210 +};
 211 +
 212 +/* DLS Action Code */
 213 +enum ieee80211_dls_actioncode {
 214 +       WLAN_ACTION_DLS_REQ = 0,
 215 +       WLAN_ACTION_DLS_RESP = 1,
 216 +       WLAN_ACTION_DLS_TEARDOWN = 2,
 217 +};
 218 +
 219 +/* BACK Action Code */
 220 +enum ieee80211_back_actioncode {
 221 +       WLAN_ACTION_ADDBA_REQ = 0,
 222 +       WLAN_ACTION_ADDBA_RESP = 1,
 223 +       WLAN_ACTION_DELBA = 2,
 224 +};
 225 +
 226  /* Information Element IDs */
 227  enum ieee80211_eid {
 228         WLAN_EID_SSID = 0,
 229 @@ -318,6 +501,15 @@
 230         WLAN_EID_HP_PARAMS = 8,
 231         WLAN_EID_HP_TABLE = 9,
 232         WLAN_EID_REQUEST = 10,
 233 +       /* 802.11e */
 234 +       WLAN_EID_QBSS_LOAD = 11,
 235 +       WLAN_EID_EDCA_PARAM_SET = 12,
 236 +       WLAN_EID_TSPEC = 13,
 237 +       WLAN_EID_TCLAS = 14,
 238 +       WLAN_EID_SCHEDULE = 15,
 239 +       WLAN_EID_TS_DELAY = 43,
 240 +       WLAN_EID_TCLAS_PROCESSING = 44,
 241 +       WLAN_EID_QOS_CAPA = 46,
 242         /* 802.11h */
 243         WLAN_EID_PWR_CONSTRAINT = 32,
 244         WLAN_EID_PWR_CAPABILITY = 33,
 245 @@ -332,6 +524,9 @@
 246         /* 802.11g */
 247         WLAN_EID_ERP_INFO = 42,
 248         WLAN_EID_EXT_SUPP_RATES = 50,
 249 +       /* 802.11n */
 250 +       WLAN_EID_HT_CAPABILITY = 45,
 251 +       WLAN_EID_HT_EXTRA_INFO = 61,
 252         /* 802.11i */
 253         WLAN_EID_RSN = 48,
 254         WLAN_EID_WPA = 221,
 255 @@ -340,6 +535,9 @@
 256         WLAN_EID_QOS_PARAMETER = 222
 257  };
 258
 259 +/* 80211n */
 260 +#define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080
 261 +
 262  /* cipher suite selectors */
 263  #define WLAN_CIPHER_SUITE_USE_GROUP    0x000FAC00
 264  #define WLAN_CIPHER_SUITE_WEP40                0x000FAC01
 265 @@ -350,4 +548,37 @@
 266
 267  #define WLAN_MAX_KEY_LEN               32
 268
 269 +enum ieee80211_tsinfo_direction {
 270 +       WLAN_TSINFO_UPLINK = 0,
 271 +       WLAN_TSINFO_DOWNLINK = 1,
 272 +       WLAN_TSINFO_DIRECTLINK = 2,
 273 +       WLAN_TSINFO_BIDIRECTIONAL = 3,
 274 +};
 275 +
 276 +enum ieee80211_tsinfo_access {
 277 +       WLAN_TSINFO_EDCA = 1,
 278 +       WLAN_TSINFO_HCCA = 2,
 279 +       WLAN_TSINFO_HEMM = 3,
 280 +};
 281 +
 282 +enum ieee80211_tsinfo_psb {
 283 +       WLAN_TSINFO_PSB_LEGACY = 0,
 284 +       WLAN_TSINFO_PSB_APSD = 1,
 285 +};
 286 +
 287 +
 288 +/* WI-FI Alliance OUI Type and Subtype */
 289 +enum wifi_oui_type {
 290 +       WIFI_OUI_TYPE_WPA = 1,
 291 +       WIFI_OUI_TYPE_WMM = 2,
 292 +       WIFI_OUI_TYPE_WSC = 4,
 293 +       WIFI_OUI_TYPE_PSD = 6,
 294 +};
 295 +
 296 +enum wifi_oui_stype_wmm {
 297 +       WIFI_OUI_STYPE_WMM_INFO = 0,
 298 +       WIFI_OUI_STYPE_WMM_PARAM = 1,
 299 +       WIFI_OUI_STYPE_WMM_TSPEC = 2,
 300 +};
 301 +
 302  #endif /* IEEE80211_H */
 303 Index: linux-2.6.23-rc6/include/linux/nl80211.h
 304 ===================================================================
 305 --- linux-2.6.23-rc6.orig/include/linux/nl80211.h       2007-09-21 16:23:52.000000000 +0800
 306 +++ linux-2.6.23-rc6/include/linux/nl80211.h    2007-09-21 16:24:07.000000000 +0800
 307 @@ -7,6 +7,217 @@
 308   */
 309
 310  /**
 311 + * enum nl80211_commands - supported nl80211 commands
 312 + * @NL80211_CMD_UNSPEC: unspecified command to catch errors
 313 + * @NL80211_CMD_RENAME_WIPHY: rename a wiphy, needs
 314 + *     %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME
 315 + * @NL80211_CMD_WIPHY_NEWNAME: rename notification
 316 + * @NL80211_CMD_GET_CMDLIST: TO BE DEFINED PROPERLY. currently the code makes
 317 + *     it depend on the wiphy only but it really should depend on the
 318 + *     interface type too....
 319 + * @NL80211_CMD_NEW_CMDLIST: command list result
 320 + * @NL80211_CMD_ADD_VIRTUAL_INTERFACE: create a virtual interface for the
 321 + *     wiphy identified by an %NL80211_ATTR_WIPHY attribute with the given
 322 + *     %NL80211_ATTR_IFTYPE and %NL80211_ATTR_IFNAME.
 323 + * @NL80211_CMD_DEL_VIRTUAL_INTERFACE: destroy a virtual interface identified
 324 + *     by %NL80211_ATTR_IFINDEX.
 325 + * @NL80211_CMD_CHANGE_VIRTUAL_INTERFACE: change type of virtual interface to
 326 + *     the type given by %NL80211_ATTR_IFTYPE, the interface is identified by
 327 + *     %NL80211_ATTR_IFINDEX.
 328 + * @NL80211_CMD_GET_WIPHYS: request a list of all wiphys present in the system
 329 + * @NL80211_CMD_NEW_WIPHYS: returned list of all wiphys
 330 + * @NL80211_CMD_GET_INTERFACES: request a list of all interfaces belonging to
 331 + *     the wiphy identified by %NL80211_ATTR_WIPHY
 332 + * @NL80211_CMD_NEW_INTERFACES: result for %NL80211_CMD_GET_INTERFACES
 333 + * @NL80211_CMD_INITIATE_SCAN: initiate a scan with the passed parameters. THe
 334 + *     parameters may contain %NL80211_ATTR_FLAG_SCAN_ACTIVE,
 335 + *     %NL80211_ATTR_PHYMODE and a list of channels in an
 336 + *     %NL80211_ATTR_CHANNEL_LIST attribute (an array of nested attributes)
 337 + *     containing %NL80211_ATTR_CHANNEL, %NL80211_ATTR_PHYMODE, and possibly
 338 + *     %NL80211_ATTR_FLAG_SCAN_ACTIVE. The outer %NL80211_ATTR_FLAG_SCAN_ACTIVE
 339 + *     is ignored when a channel list is present.
 340 + * @NL80211_CMD_SCAN_RESULT: scan result, contains an array in
 341 + *     %NL80211_ATTR_BSS_LIST.
 342 + * @NL80211_CMD_ASSOCIATE: associate with the given parameters
 343 + *     (%NL80211_ATTR_SSID is mandatory, %NL80211_ATTR_TIMEOUT_TU,
 344 + *     %NL80211_ATTR_BSSID, %NL80211_ATTR_CHANNEL, %NL80211_ATTR_PHYMODE,
 345 + *     and %NL80211_ATTR_IE may be given)
 346 + * @NL80211_CMD_ADD_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
 347 + *     %NL80211_ATTR_KEY_ID, %NL80211_ATTR_KEY_TYPE, %NL80211_ATTR_MAC and
 348 + *     %NL80211_ATTR_KEY_CIPHER attributes.
 349 + * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_ID,
 350 + *     %NL80211_ATTR_KEY_TYPE and %NL80211_ATTR_MAC or all keys.
 351 + * @__NL80211_CMD_AFTER_LAST: internal use
 352 + */
 353 +enum nl80211_commands {
 354 +/* don't change the order or add anything inbetween, this is ABI! */
 355 +       NL80211_CMD_UNSPEC,
 356 +       /* %input: wiphy, wiphy_name */
 357 +       NL80211_CMD_RENAME_WIPHY,
 358 +       NL80211_CMD_WIPHY_NEWNAME,
 359 +       /* %input: wiphy|ifindex */
 360 +       NL80211_CMD_GET_CMDLIST,
 361 +       NL80211_CMD_NEW_CMDLIST,
 362 +       /* %input: wiphy, ifname, {iftype} */
 363 +       NL80211_CMD_ADD_VIRTUAL_INTERFACE,
 364 +       /* %input: wiphy, ifindex */
 365 +       NL80211_CMD_DEL_VIRTUAL_INTERFACE,
 366 +       /* %input: ifindex, iftype */
 367 +       NL80211_CMD_CHANGE_VIRTUAL_INTERFACE,
 368 +       /* %input: */
 369 +       NL80211_CMD_GET_WIPHYS,
 370 +       NL80211_CMD_NEW_WIPHYS,
 371 +       /* %input: wiphy */
 372 +       NL80211_CMD_GET_INTERFACES,
 373 +       NL80211_CMD_NEW_INTERFACES,
 374 +       NL80211_CMD_INITIATE_SCAN,
 375 +       NL80211_CMD_SCAN_RESULT,
 376 +       NL80211_CMD_GET_ASSOCIATION,
 377 +       NL80211_CMD_ASSOCIATION_CHANGED,
 378 +       NL80211_CMD_ASSOCIATE,
 379 +       NL80211_CMD_DISASSOCIATE,
 380 +       NL80211_CMD_DEAUTH,
 381 +       NL80211_CMD_GET_AUTH_LIST,
 382 +       NL80211_CMD_NEW_AUTH_LIST,
 383 +       NL80211_CMD_AUTHENTICATION_CHANGED,
 384 +       NL80211_CMD_AP_SET_BEACON,
 385 +       NL80211_CMD_AP_ADD_STA,
 386 +       NL80211_CMD_AP_UPDATE_STA,
 387 +       NL80211_CMD_AP_GET_STA_INFO,
 388 +       NL80211_CMD_AP_SET_RATESETS,
 389 +       NL80211_CMD_ADD_KEY,
 390 +       NL80211_CMD_DEL_KEY,
 391 +
 392 +       /* add commands here */
 393 +
 394 +       /* used to define NL80211_CMD_MAX below */
 395 +       __NL80211_CMD_AFTER_LAST
 396 +};
 397 +#define NL80211_CMD_MAX (__NL80211_CMD_AFTER_LAST - 1)
 398 +
 399 +
 400 +/**
 401 + * enum nl80211_attrs - nl80211 netlink attributes
 402 + * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
 403 + * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
 404 + * @NL80211_ATTR_IFNAME: network interface name
 405 + * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
 406 + *     /sys/class/ieee80211/<phyname>/index
 407 + * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
 408 + * @NL80211_ATTR_CMDS: list of u8's identifying commands a device supports
 409 + * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
 410 + * @NL80211_ATTR_INTERFACE_LIST: interface array, nested netlink attribute
 411 + * @NL80211_ATTR_WIPHY_LIST: wiphy array, nested netlink attribute
 412 + * @NL80211_ATTR_BSSID: BSSID (must be 6 bytes)
 413 + * @NL80211_ATTR_SSID: SSID (1-32 bytes)
 414 + * @NL80211_ATTR_CHANNEL: channel number
 415 + * @NL80211_ATTR_PHYMODE: PHY mode, see &enum nl80211_phymode
 416 + * @NL80211_ATTR_CHANNEL_LIST: netlink nested attribute array containing scan
 417 + *     parameters for channels
 418 + * @NL80211_ATTR_BSS_LIST: nested attribute containing an array
 419 + * @NL80211_ATTR_BSSTYPE: BSS type, see &enum nl80211_bsstype
 420 + * @NL80211_ATTR_BEACON_PERIOD: beacon period
 421 + * @NL80211_ATTR_DTIM_PERIOD: DTIM period
 422 + * @NL80211_ATTR_TIMESTAMP: 64-bit timestamp of received beacon/probe response
 423 + * @NL80211_ATTR_IE: information element(s), maximum length %NL80211_MAX_IE_LEN
 424 + * @NL80211_ATTR_AUTH_ALGORITHM: authentication algorithm
 425 + * @NL80211_ATTR_TIMEOUT_TU: timeout in TU (TO BE USED)
 426 + * @NL80211_ATTR_REASON_CODE: 802.11 reason code
 427 + * @NL80211_ATTR_ASSOCIATION_ID: association ID (u16, 1-2007)
 428 + * @NL80211_ATTR_DEAUTHENTICATED: TO BE USED
 429 + * @NL80211_ATTR_RX_SENSITIVITY: receiver sensitivity in dBm
 430 + * @NL80211_ATTR_TRANSMIT_POWER: transmit power in mW
 431 + * @NL80211_ATTR_FRAG_THRESHOLD: fragmentation threshold (bytes)
 432 + * @NL80211_ATTR_FLAG_SCAN_ACTIVE: netlink flag indiciating active scan
 433 + * @NL80211_ATTR_KEY_DATA: temporal key data
 434 + * @NL80211_ATTR_KEY_ID: key ID (u8, 0-3)
 435 + * @NL80211_ATTR_KEY_TYPE: key type (see &enum nl80211_keytype)
 436 + * @NL80211_ATTR_MAC: MAC address
 437 + * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32)
 438 + * @__NL80211_ATTR_AFTER_LAST: internal use
 439 + */
 440 +enum nl80211_attrs {
 441 +/* don't change the order or add anything inbetween, this is ABI! */
 442 +       NL80211_ATTR_UNSPEC,
 443 +       /* %type: u32 */
 444 +       NL80211_ATTR_IFINDEX,
 445 +       /* %type: nulstring */
 446 +       NL80211_ATTR_IFNAME,
 447 +       /* %type: u32 */
 448 +       NL80211_ATTR_WIPHY,
 449 +       /* %type: nulstring */
 450 +       NL80211_ATTR_WIPHY_NAME,
 451 +       NL80211_ATTR_CMDS,
 452 +       /* %type: u32 */
 453 +       NL80211_ATTR_IFTYPE,
 454 +       NL80211_ATTR_INTERFACE_LIST,
 455 +       NL80211_ATTR_WIPHY_LIST,
 456 +       NL80211_ATTR_BSSID,
 457 +       NL80211_ATTR_SSID,
 458 +       NL80211_ATTR_CHANNEL,
 459 +       NL80211_ATTR_PHYMODE,
 460 +       NL80211_ATTR_CHANNEL_LIST,
 461 +       NL80211_ATTR_BSS_LIST,
 462 +       NL80211_ATTR_BSSTYPE,
 463 +       NL80211_ATTR_BEACON_PERIOD,
 464 +       NL80211_ATTR_DTIM_PERIOD,
 465 +       NL80211_ATTR_TIMESTAMP,
 466 +       NL80211_ATTR_IE,
 467 +       NL80211_ATTR_AUTH_ALGORITHM,
 468 +       NL80211_ATTR_TIMEOUT_TU,
 469 +       NL80211_ATTR_REASON_CODE,
 470 +       NL80211_ATTR_ASSOCIATION_ID,
 471 +       NL80211_ATTR_DEAUTHENTICATED,
 472 +       NL80211_ATTR_RX_SENSITIVITY,
 473 +       NL80211_ATTR_TRANSMIT_POWER,
 474 +       NL80211_ATTR_FRAG_THRESHOLD,
 475 +       NL80211_ATTR_FLAG_SCAN_ACTIVE,
 476 +
 477 +       NL80211_ATTR_KEY_DATA,
 478 +       NL80211_ATTR_KEY_ID,
 479 +       NL80211_ATTR_KEY_TYPE,
 480 +       NL80211_ATTR_MAC,
 481 +       NL80211_ATTR_KEY_CIPHER,
 482 +
 483 +       NL80211_ATTR_BEACON_HEAD,
 484 +       NL80211_ATTR_BEACON_TAIL,
 485 +
 486 +       /* add attributes here, update the policy in nl80211.c */
 487 +
 488 +       /* used to define NL80211_ATTR_MAX below */
 489 +       __NL80211_ATTR_AFTER_LAST,
 490 +};
 491 +#define NL80211_ATTR_MAX (__NL80211_ATTR_AFTER_LAST - 1)
 492 +
 493 +/**
 494 + * enum nl80211_multicast_groups - multicast groups for nl80211
 495 + * @NL80211_GROUP_CONFIG: members of this group are notified of
 496 + *     configuration changes
 497 + */
 498 +enum nl80211_multicast_groups {
 499 +       /* be notified of configuration changes like wiphy renames */
 500 +       NL80211_GROUP_CONFIG,
 501 +
 502 +       /* add groups here */
 503 +
 504 +       /* keep last */
 505 +       __NL80211_GROUP_AFTER_LAST
 506 +};
 507 +#define NL80211_GROUP_MAX (__NL80211_GROUP_AFTER_LAST - 1)
 508 +
 509 +/*
 510 + * maximum length of IE(s) passed in an NL80211_ATTR_IE.
 511 + * this is an arbitrary limit, 774 means three full-length
 512 + * IEs would fit... increase if necessary */
 513 +#define NL80211_MAX_IE_LEN 774
 514 +
 515 +/*
 516 + * maximum number of items in an ATTR_CHANNEL_LIST,
 517 + * just to avoid too large allocations
 518 + */
 519 +#define NL80211_MAX_CHANNEL_LIST_ITEM 200
 520 +
 521 +/**
 522   * enum nl80211_iftype - (virtual) interface types
 523   * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
 524   * @NL80211_IFTYPE_ADHOC: independent BSS member
 525 @@ -35,4 +246,56 @@
 526  };
 527  #define NL80211_IFTYPE_MAX (__NL80211_IFTYPE_AFTER_LAST - 1)
 528
 529 +/**
 530 + * enum nl80211_phymode - PHY modes
 531 + * @NL80211_PHYMODE_A: 5 GHz PHY
 532 + * @NL80211_PHYMODE_B: 2.4 GHz PHY (B mode)
 533 + * @NL80211_PHYMODE_G: 2.4 GHz PHY (G, compatible with B)
 534 + * @__NL80211_PHYMODE_AFTER_LAST: internal use
 535 + *
 536 + * These values are used for %NL80211_ATTR_PHYMODE.
 537 + */
 538 +enum nl80211_phymode {
 539 +       NL80211_PHYMODE_A,
 540 +       NL80211_PHYMODE_B,
 541 +       NL80211_PHYMODE_G,
 542 +
 543 +       /* keep last */
 544 +       __NL80211_PHYMODE_AFTER_LAST
 545 +};
 546 +#define NL80211_PHYMODE_MAX (__NL80211_PHYMODE_AFTER_LAST - 1)
 547 +
 548 +/**
 549 + * enum nl80211_bsstype - BSS types
 550 + * @NL80211_BSSTYPE_INFRASTRUCTURE: infrastructure BSS
 551 + * @NL80211_BSSTYPE_INDEPENDENT: independent BSS (ad-hoc network)
 552 + * @__NL80211_BSSTYPE_AFTER_LAST: internal use
 553 + *
 554 + * These values are used for %NL80211_ATTR_BSSTYPE.
 555 + */
 556 +enum nl80211_bsstype {
 557 +       NL80211_BSSTYPE_INFRASTRUCTURE,
 558 +       NL80211_BSSTYPE_INDEPENDENT,
 559 +
 560 +       /* keep last */
 561 +       __NL80211_BSSTYPE_AFTER_LAST
 562 +};
 563 +#define NL80211_BSSTYPE_MAX (__NL80211_BSSTYPE_AFTER_LAST - 1)
 564 +
 565 +/**
 566 + * enum nl80211_keytype - key types
 567 + * @NL80211_KEYTYPE_GROUP: group key
 568 + * @NL80211_KEYTYPE_PAIRWISE: pairwise key
 569 + * @NL80211_KEYTYPE_PEER: peer key
 570 + */
 571 +enum nl80211_keytype {
 572 +       NL80211_KEYTYPE_GROUP,
 573 +       NL80211_KEYTYPE_PAIRWISE,
 574 +       NL80211_KEYTYPE_PEER,
 575 +
 576 +       /* keep last */
 577 +       __NL80211_KEYTYPE_AFTER_LAST
 578 +};
 579 +#define NL80211_KEYTYPE_MAX (__NL80211_KEYTYPE_AFTER_LAST - 1)
 580 +
 581  #endif /* __LINUX_NL80211_H */
 582 Index: linux-2.6.23-rc6/include/net/cfg80211.h
 583 ===================================================================
 584 --- linux-2.6.23-rc6.orig/include/net/cfg80211.h        2007-09-21 16:23:52.000000000 +0800
 585 +++ linux-2.6.23-rc6/include/net/cfg80211.h     2007-09-21 16:24:07.000000000 +0800
 586 @@ -3,6 +3,7 @@
 587
 588  #include <linux/netlink.h>
 589  #include <linux/skbuff.h>
 590 +#include <linux/nl80211.h>
 591  #include <net/genetlink.h>
 592
 593  /*
 594 @@ -49,6 +50,69 @@
 595     struct ieee80211_radiotap_iterator *iterator);
 596
 597
 598 +/**
 599 + * struct scan_channel - describes a single channel to scan
 600 + * @phymode: PHY mode for this channel
 601 + * @channel: channel number (1-14, ...)
 602 + * @active: scan actively or passively on this channel
 603 + */
 604 +struct scan_channel {
 605 +       enum nl80211_phymode phymode;
 606 +       u32 channel;
 607 +       int active;
 608 +};
 609 +
 610 +/**
 611 + * struct scan_params - describes scan parameters
 612 + * @n_channels: number of items in @channels array or -1 to indicate all
 613 + *     channels should be scanned (in that case @channels will be %NULL)
 614 + * @active: when n_channels is -1 this determines active/passive scanning.
 615 + * @phymode: when n_channels is -1 this determines PHY mode to scan. It is
 616 + *     not possible to scan different PHY modes in one request w/o giving
 617 + *     a channel list.
 618 + * @channels: array containing @n_channels &struct scan_channel items
 619 + */
 620 +struct scan_params {
 621 +       int n_channels;
 622 +       int active;
 623 +       enum nl80211_phymode phymode;
 624 +       struct scan_channel *channels;
 625 +};
 626 +
 627 +/**
 628 + * struct association_params - describes association parameters
 629 + * @valid: this member contains flags which items are valid
 630 + * @bssid: the BSSID of the BSS to associate [%ASSOC_PARAMS_BSSID]
 631 + * @timeout: timeout (in TU) [%ASSOC_PARAMS_TIMEOUT]
 632 + * @ie: information element(s) to include in the association frames [%ASSOC_PARAMS_IE]
 633 + * @ie_len: length of the information element(s)
 634 + * @ssid: the SSID, always valid.
 635 + * @ssid_len: length of the SSID
 636 + */
 637 +struct association_params {
 638 +       u8 *bssid;
 639 +       u32 timeout;
 640 +       u8 *ie;
 641 +       int ie_len;
 642 +       u8 *ssid;
 643 +       int ssid_len;
 644 +
 645 +       unsigned int valid;
 646 +};
 647 +#define ASSOC_PARAMS_TIMEOUT   (1<<0)
 648 +
 649 +/**
 650 + * struct key_params - key information
 651 + */
 652 +struct key_params {
 653 +       u8 *key;
 654 +       int key_len;
 655 +       int key_id;
 656 +       u32 key_type;
 657 +       u8 *macaddress;
 658 +       u32 cipher;
 659 +};
 660 +
 661  /* from net/wireless.h */
 662  struct wiphy;
 663
 664 @@ -68,11 +132,62 @@
 665   * @add_virtual_intf: create a new virtual interface with the given name
 666   *
 667   * @del_virtual_intf: remove the virtual interface determined by ifindex.
 668 + *
 669 + * @change_virtual_intf: change type of virtual interface
 670 + *
 671 + * @associate: associate with given parameters
 672 + *
 673 + * @disassociate: disassociate from current AP
 674 + *
 675 + * @deauth: deauth from current AP
 676 + *
 677 + * @initiate_scan: scan with the given information (see &struct scan_params above)
 678 + *
 679 + * @get_association: get BSSID of the BSS that the device is currently
 680 + *                  associated to and return 1, or return 0 if not
 681 + *                  associated (or a negative error code)
 682 + * @get_auth_list: get list of BSSIDs of all BSSs the device has
 683 + *                authenticated with, must call next_bssid for each,
 684 + *                next_bssid returns non-zero on error, the given data
 685 + *                is to be passed to that callback
 686 + * @add_key: add a key using &struct key_params
 687 + * @del_key: delete a key using info from &struct key_params
 688   */
 689  struct cfg80211_ops {
 690         int     (*add_virtual_intf)(struct wiphy *wiphy, char *name,
 691 -                                   unsigned int type);
 692 +                                   enum nl80211_iftype type);
 693         int     (*del_virtual_intf)(struct wiphy *wiphy, int ifindex);
 694 +       int     (*change_virtual_intf)(struct wiphy *wiphy, int ifindex,
 695 +                                      enum nl80211_iftype type);
 696 +
 697 +       int     (*associate)(struct wiphy *wiphy, struct net_device *dev,
 698 +                            struct association_params *params);
 699 +       int     (*disassociate)(struct wiphy *wiphy, struct net_device *dev);
 700 +       int     (*deauth)(struct wiphy *wiphy, struct net_device *dev);
 701 +
 702 +
 703 +       int     (*initiate_scan)(struct wiphy *wiphy, struct net_device *dev,
 704 +                                struct scan_params *params);
 705 +
 706 +
 707 +       int     (*get_association)(struct wiphy *wiphy, struct net_device *dev,
 708 +                                  u8 *bssid);
 709 +
 710 +       int     (*get_auth_list)(struct wiphy *wiphy, struct net_device *dev,
 711 +                                void *data,
 712 +                                int (*next_bssid)(void *data, u8 *bssid));
 713 +
 714 +       int     (*add_key)(struct wiphy *wiphy, struct net_device *dev,
 715 +                          struct key_params *params);
 716 +       int     (*del_key)(struct wiphy *wiphy, struct net_device *dev,
 717 +                          struct key_params *params);
 718  };
 719
 720 +
 721 +/* helper functions specific to nl80211 */
 722 +extern void *nl80211hdr_put(struct sk_buff *skb, u32 pid,
 723 +                           u32 seq, int flags, u8 cmd);
 724 +extern void *nl80211msg_new(struct sk_buff **skb, u32 pid,
 725 +                           u32 seq, int flags, u8 cmd);
 726 +
 727  #endif /* __NET_CFG80211_H */
 728 Index: linux-2.6.23-rc6/include/net/iw_handler.h
 729 ===================================================================
 730 --- linux-2.6.23-rc6.orig/include/net/iw_handler.h      2007-09-21 16:23:52.000000000 +0800
 731 +++ linux-2.6.23-rc6/include/net/iw_handler.h   2007-09-21 16:24:07.000000000 +0800
 732 @@ -431,7 +431,13 @@
 733   * Those may be called only within the kernel.
 734   */
 735
 736 -/* functions that may be called by driver modules */
 737 +/* First : function strictly used inside the kernel */
 738 +
 739 +/* Handle /proc/net/wireless, called in net/code/dev.c */
 740 +extern int dev_get_wireless_info(char * buffer, char **start, off_t offset,
 741 +                                int length);
 742 +
 743 +/* Second : functions that may be called by driver modules */
 744
 745  /* Send a single event to user space */
 746  extern void wireless_send_event(struct net_device *    dev,
 747 Index: linux-2.6.23-rc6/include/net/mac80211.h
 748 ===================================================================
 749 --- linux-2.6.23-rc6.orig/include/net/mac80211.h        2007-09-21 16:23:52.000000000 +0800
 750 +++ linux-2.6.23-rc6/include/net/mac80211.h     2007-09-21 16:24:07.000000000 +0800
 751 @@ -300,7 +300,6 @@
 752         /* Following five fields are used for IEEE 802.11H */
 753         unsigned int radar_detect;
 754         unsigned int spect_mgmt;
 755 -       /* All following fields are currently unused. */
 756         unsigned int quiet_duration; /* duration of quiet period */
 757         unsigned int quiet_offset; /* how far into the beacon is the quiet
 758                                     * period */
 759 @@ -521,6 +520,9 @@
 760          * per-packet RC4 key with each TX frame when doing hwcrypto */
 761  #define IEEE80211_HW_TKIP_REQ_PHASE2_KEY (1<<14)
 762
 763 +       /* The device capable of supporting 11n */
 764 +#define IEEE80211_HW_SUPPORT_HT_MODE (1<<15)
 765 +
 766         u32 flags;                      /* hardware flags defined above */
 767
 768         /* Set to the size of a needed device specific skb headroom for TX skbs. */
 769 @@ -649,8 +651,7 @@
 770          * used if the wlan hardware or low-level driver implements PAE.
 771          * 80211.o module will anyway filter frames based on authorization
 772          * state, so this function pointer can be NULL if low-level driver does
 773 -        * not require event notification about port state changes.
 774 -        * Currently unused. */
 775 +        * not require event notification about port state changes. */
 776         int (*set_port_auth)(struct ieee80211_hw *hw, u8 *addr,
 777                              int authorized);
 778
 779 @@ -702,8 +703,9 @@
 780         /* Get statistics of the current TX queue status. This is used to get
 781          * number of currently queued packets (queue length), maximum queue
 782          * size (limit), and total number of packets sent using each TX queue
 783 -        * (count).
 784 -        * Currently unused. */
 785 +        * (count). This information is used for WMM to find out which TX
 786 +        * queues have room for more packets and by hostapd to provide
 787 +        * statistics about the current queueing state to external programs. */
 788         int (*get_tx_stats)(struct ieee80211_hw *hw,
 789                             struct ieee80211_tx_queue_stats *stats);
 790
 791 @@ -713,12 +715,25 @@
 792          * Must be atomic. */
 793         u64 (*get_tsf)(struct ieee80211_hw *hw);
 794
 795 +       /* Call low level driver with 11n Block Ack action */
 796 +       int (*handle_ba_action)(struct ieee80211_hw *hw,
 797 +                               struct ieee80211_mgmt *mgmt);
 798 +
 799         /* Reset the TSF timer and allow firmware/hardware to synchronize with
 800          * other STAs in the IBSS. This is only used in IBSS mode. This
 801          * function is optional if the firmware/hardware takes full care of
 802          * TSF synchronization. */
 803         void (*reset_tsf)(struct ieee80211_hw *hw);
 804
 805 +       /* Configure ht parameters. */
 806 +       int (*conf_ht)(struct ieee80211_hw *hw,
 807 +                      struct ieee80211_ht_capability *ht_cap_param,
 808 +                      struct ieee80211_ht_additional_info *ht_extra_param);
 809 +
 810 +       /* Get ht capabilities from the device */
 811 +       void (*get_ht_capab)(struct ieee80211_hw *hw,
 812 +                            struct ieee80211_ht_capability *ht_cap_param);
 813 +
 814         /* Setup beacon data for IBSS beacons. Unlike access point (Master),
 815          * IBSS uses a fixed beacon frame which is configured using this
 816          * function. This handler is required only for IBSS mode. */