target/linux/omap24xx/patches-3.1/310-n810-lcd.patch

   1 --- a/arch/arm/mach-omap2/board-n8x0.c
   2 +++ b/arch/arm/mach-omap2/board-n8x0.c
   3 @@ -24,6 +24,7 @@
   4  #include <linux/spi/spi.h>
   5  #include <linux/usb/musb.h>
   6  #include <sound/tlv320aic3x.h>
   7 +#include <linux/spi/tsc2005.h>
   8
   9  #include <asm/mach/arch.h>
  10  #include <asm/mach-types.h>
  11 @@ -43,6 +44,66 @@ static int slot1_cover_open;
  12  static int slot2_cover_open;
  13  static struct device *mmc_device;
  14
  15 +#define        RX51_TSC2005_RESET_GPIO 94
  16 +#define        RX51_TSC2005_IRQ_GPIO   106
  17 +
  18 +#ifdef CONFIG_TOUCHSCREEN_TSC2005
  19 +static struct tsc2005_platform_data tsc2005_config;
  20 +static void rx51_tsc2005_set_reset(bool enable)
  21 +{
  22 +       gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
  23 +}
  24 +
  25 +static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
  26 +       .turbo_mode     = 0,
  27 +       .single_channel = 1,
  28 +};
  29 +#endif
  30 +
  31 +static void __init tsc2005_set_config(void)
  32 +{
  33 +       const struct omap_lcd_config *conf;
  34 +
  35 +       conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
  36 +       if (conf != NULL) {
  37 +#ifdef CONFIG_TOUCHSCREEN_TSC2005
  38 +               if (strcmp(conf->panel_name, "lph8923") == 0) {
  39 +                       tsc2005_config.ts_x_plate_ohm = 180;
  40 +                       tsc2005_config.ts_pressure_max = 2048;
  41 +                       tsc2005_config.ts_pressure_fudge = 2;
  42 +                       tsc2005_config.ts_x_max = 4096;
  43 +                       tsc2005_config.ts_x_fudge = 4;
  44 +                       tsc2005_config.ts_y_max = 4096;
  45 +                       tsc2005_config.ts_y_fudge = 7;
  46 +                       tsc2005_config.set_reset = rx51_tsc2005_set_reset;
  47 +               } else if (strcmp(conf->panel_name, "ls041y3") == 0) {
  48 +                       tsc2005_config.ts_x_plate_ohm = 280;
  49 +                       tsc2005_config.ts_pressure_max = 2048;
  50 +                       tsc2005_config.ts_pressure_fudge = 2;
  51 +                       tsc2005_config.ts_x_max = 4096;
  52 +                       tsc2005_config.ts_x_fudge = 4;
  53 +                       tsc2005_config.ts_y_max = 4096;
  54 +                       tsc2005_config.ts_y_fudge = 7;
  55 +                       tsc2005_config.set_reset = rx51_tsc2005_set_reset;
  56 +               } else {
  57 +                       printk(KERN_ERR "Unknown panel type, set default "
  58 +                              "touchscreen configuration\n");
  59 +                       tsc2005_config.ts_x_plate_ohm = 200;
  60 +               }
  61 +#endif
  62 +       }
  63 +}
  64 +
  65 +static struct omap2_mcspi_device_config mipid_mcspi_config = {
  66 +       .turbo_mode     = 0,
  67 +       .single_channel = 1,
  68 +};
  69 +
  70 +extern struct mipid_platform_data n8x0_mipid_platform_data;
  71 +
  72 +extern void n8x0_mipid_init(void);
  73 +extern void n8x0_blizzard_init(void);
  74 +
  75  #define TUSB6010_ASYNC_CS      1
  76  #define TUSB6010_SYNC_CS       4
  77  #define TUSB6010_GPIO_INT      58
  78 @@ -145,12 +206,29 @@ static struct omap2_mcspi_device_config
  79
  80  static struct spi_board_info n800_spi_board_info[] __initdata = {
  81         {
  82 +               .modalias       = "lcd_mipid",
  83 +               .bus_num        = 1,
  84 +               .chip_select    = 1,
  85 +               .max_speed_hz   = 4000000,
  86 +               .controller_data= &mipid_mcspi_config,
  87 +               .platform_data  = &n8x0_mipid_platform_data,
  88 +       },
  89 +       {
  90                 .modalias       = "p54spi",
  91                 .bus_num        = 2,
  92                 .chip_select    = 0,
  93                 .max_speed_hz   = 48000000,
  94                 .controller_data = &p54spi_mcspi_config,
  95         },
  96 +       {
  97 +               .modalias        = "tsc2005",
  98 +               .bus_num         = 1,
  99 +               .chip_select     = 0,
 100 +               .irq             = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
 101 +               .max_speed_hz    = 6000000,
 102 +               .controller_data = &tsc2005_mcspi_config,
 103 +               .platform_data   = &tsc2005_config,
 104 +       },
 105  };
 106
 107  #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
 108 @@ -789,6 +867,7 @@ static void __init n8x0_init_machine(voi
 109         n8x0_cbus_init();
 110
 111         /* FIXME: add n810 spi devices */
 112 +       tsc2005_set_config();
 113         spi_register_board_info(n800_spi_board_info,
 114                                 ARRAY_SIZE(n800_spi_board_info));
 115         omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
 116 @@ -798,6 +877,8 @@ static void __init n8x0_init_machine(voi
 117                 i2c_register_board_info(2, n810_i2c_board_info_2,
 118                                         ARRAY_SIZE(n810_i2c_board_info_2));
 119         board_serial_init();
 120 +       n8x0_mipid_init();
 121 +       n8x0_blizzard_init();
 122         gpmc_onenand_init(board_onenand_data);
 123         n8x0_mmc_init();
 124         n8x0_usb_init();
 125 --- /dev/null
 126 +++ b/arch/arm/mach-omap2/board-n8x0-lcd.c
 127 @@ -0,0 +1,231 @@
 128 +/*
 129 + * linux/arch/arm/mach-omap2/board-n8x0.c
 130 + *
 131 + * Copyright (C) 2005-2009 Nokia Corporation
 132 + * Author: Juha Yrjola <juha.yrjola@nokia.com>
 133 + *
 134 + * Modified from mach-omap2/board-generic.c
 135 + *
 136 + * This program is free software; you can redistribute it and/or modify
 137 + * it under the terms of the GNU General Public License version 2 as
 138 + * published by the Free Software Foundation.
 139 + */
 140 +
 141 +#include <linux/clk.h>
 142 +#include <linux/delay.h>
 143 +#include <linux/gpio.h>
 144 +#include <linux/omapfb.h>
 145 +
 146 +#include <plat/lcd_mipid.h>
 147 +#include <plat/blizzard.h>
 148 +
 149 +#include "../../../drivers/cbus/tahvo.h"
 150 +
 151 +
 152 +struct tahvo_pwm_device {
 153 +       struct device *dev;
 154 +       int tahvo_7bit_backlight;
 155 +};
 156 +
 157 +static struct tahvo_pwm_device *tahvo_pwm;
 158 +
 159 +static unsigned int tahvo_pwm_get_backlight_level(struct tahvo_pwm_device *pd)
 160 +{
 161 +       unsigned int mask;
 162 +
 163 +       if (pd->tahvo_7bit_backlight)
 164 +               mask = 0x7f;
 165 +       else
 166 +               mask = 0x0f;
 167 +       return tahvo_read_reg(pd->dev, TAHVO_REG_LEDPWMR) & mask;
 168 +}
 169 +
 170 +static unsigned int tahvo_pwm_get_max_backlight_level(struct tahvo_pwm_device *pd)
 171 +{
 172 +       if (pd->tahvo_7bit_backlight)
 173 +               return 0x7f;
 174 +       return 0x0f;
 175 +}
 176 +
 177 +static void tahvo_pwm_set_backlight_level(struct tahvo_pwm_device *pd, unsigned int level)
 178 +{
 179 +       unsigned int max_level;
 180 +
 181 +       max_level = tahvo_pwm_get_max_backlight_level(pd);
 182 +       if (level > max_level)
 183 +               level = max_level;
 184 +       tahvo_write_reg(pd->dev, TAHVO_REG_LEDPWMR, level);
 185 +}
 186 +
 187 +static int __init n8x0_tahvo_pwm_probe(struct platform_device *pdev)
 188 +{
 189 +       struct tahvo_pwm_device *pd;
 190 +       unsigned int rev, id;
 191 +
 192 +       pd = kzalloc(sizeof(*pd), GFP_KERNEL);
 193 +       if (WARN_ON(!pd))
 194 +               return -ENOMEM;
 195 +       pd->dev = &pdev->dev;
 196 +
 197 +       rev = tahvo_read_reg(pd->dev, TAHVO_REG_ASICR);
 198 +       id = (rev >> 8) & 0xff;
 199 +       if (id == 0x03) {
 200 +               if ((rev & 0xff) >= 0x50)
 201 +                       pd->tahvo_7bit_backlight = 1;
 202 +       } else if (id == 0x0b)
 203 +               pd->tahvo_7bit_backlight = 1;
 204 +
 205 +       dev_set_drvdata(pd->dev, pd);
 206 +       tahvo_pwm = pd;
 207 +
 208 +       return 0;
 209 +}
 210 +
 211 +static struct platform_driver n8x0_tahvo_pwm_driver = {
 212 +       .driver         = {
 213 +               .name   = "tahvo-pwm",
 214 +       },
 215 +};
 216 +
 217 +static int __init n8x0_tahvo_pwm_init(void)
 218 +{
 219 +       return platform_driver_probe(&n8x0_tahvo_pwm_driver, n8x0_tahvo_pwm_probe);
 220 +}
 221 +fs_initcall(n8x0_tahvo_pwm_init);
 222 +
 223 +static int n8x0_get_backlight_level(struct mipid_platform_data *pdata)
 224 +{
 225 +       return tahvo_pwm_get_backlight_level(tahvo_pwm);
 226 +}
 227 +
 228 +static int n8x0_get_max_backlight_level(struct mipid_platform_data *pdata)
 229 +{
 230 +       return tahvo_pwm_get_max_backlight_level(tahvo_pwm);
 231 +}
 232 +
 233 +static void n8x0_set_backlight_level(struct mipid_platform_data *pdata, int level)
 234 +{
 235 +       tahvo_pwm_set_backlight_level(tahvo_pwm, level);
 236 +}
 237 +
 238 +#define N8X0_BLIZZARD_POWERDOWN_GPIO   15
 239 +
 240 +// MIPID LCD Panel
 241 +
 242 +static void mipid_shutdown(struct mipid_platform_data *pdata)
 243 +{
 244 +       if (pdata->nreset_gpio != -1) {
 245 +               pr_info("shutdown LCD\n");
 246 +               gpio_set_value(pdata->nreset_gpio, 0);
 247 +               msleep(120);
 248 +       }
 249 +}
 250 +
 251 +struct mipid_platform_data n8x0_mipid_platform_data = {
 252 +       .shutdown = mipid_shutdown,
 253 +       .get_bklight_level = n8x0_get_backlight_level,
 254 +       .set_bklight_level = n8x0_set_backlight_level,
 255 +       .get_bklight_max = n8x0_get_max_backlight_level,
 256 +};
 257 +
 258 +void __init n8x0_mipid_init(void)
 259 +{
 260 +       const struct omap_lcd_config *conf;
 261 +       int err;
 262 +
 263 +       conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
 264 +       if (conf != NULL) {
 265 +               n8x0_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
 266 +               n8x0_mipid_platform_data.data_lines = conf->data_lines;
 267 +               if (conf->nreset_gpio != -1) {
 268 +                       err = gpio_request(conf->nreset_gpio, "MIPID nreset");
 269 +                       if (err) {
 270 +                               printk(KERN_ERR "N8x0 MIPID failed to request nreset GPIO %d\n",
 271 +                                      conf->nreset_gpio);
 272 +                       } else {
 273 +                               err = gpio_direction_output(conf->nreset_gpio, 1);
 274 +                               if (err) {
 275 +                                       printk(KERN_ERR "N8x0 MIPID failed to set nreset GPIO %d\n",
 276 +                                              conf->nreset_gpio);
 277 +                               }
 278 +                       }
 279 +               }
 280 +               printk(KERN_INFO "N8x0 MIPID config loaded");
 281 +       }
 282 +       else
 283 +               printk(KERN_INFO "N8x0 MIPID config not provided");
 284 +}
 285 +
 286 +
 287 +// Epson Blizzard LCD Controller
 288 +
 289 +static struct {
 290 +       struct clk *sys_ck;
 291 +} blizzard;
 292 +
 293 +static int blizzard_get_clocks(void)
 294 +{
 295 +       blizzard.sys_ck = clk_get(0, "osc_ck");
 296 +       if (IS_ERR(blizzard.sys_ck)) {
 297 +               printk(KERN_ERR "can't get Blizzard clock\n");
 298 +               return PTR_ERR(blizzard.sys_ck);
 299 +       }
 300 +       return 0;
 301 +}
 302 +
 303 +static unsigned long blizzard_get_clock_rate(struct device *dev)
 304 +{
 305 +       return clk_get_rate(blizzard.sys_ck);
 306 +}
 307 +
 308 +static void blizzard_enable_clocks(int enable)
 309 +{
 310 +       if (enable)
 311 +               clk_enable(blizzard.sys_ck);
 312 +       else
 313 +               clk_disable(blizzard.sys_ck);
 314 +}
 315 +
 316 +static void blizzard_power_up(struct device *dev)
 317 +{
 318 +       /* Vcore to 1.475V */
 319 +       tahvo_set_clear_reg_bits(tahvo_pwm->dev, 0x07, 0, 0xf);
 320 +       msleep(10);
 321 +
 322 +       blizzard_enable_clocks(1);
 323 +       gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 1);
 324 +}
 325 +
 326 +static void blizzard_power_down(struct device *dev)
 327 +{
 328 +       gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 0);
 329 +       blizzard_enable_clocks(0);
 330 +
 331 +       /* Vcore to 1.005V */
 332 +       tahvo_set_clear_reg_bits(tahvo_pwm->dev, 0x07, 0xf, 0);
 333 +}
 334 +
 335 +static struct blizzard_platform_data n8x0_blizzard_data = {
 336 +       .power_up       = blizzard_power_up,
 337 +       .power_down     = blizzard_power_down,
 338 +       .get_clock_rate = blizzard_get_clock_rate,
 339 +       .te_connected   = 1,
 340 +};
 341 +
 342 +void __init n8x0_blizzard_init(void)
 343 +{
 344 +       int r;
 345 +
 346 +       r = gpio_request(N8X0_BLIZZARD_POWERDOWN_GPIO, "Blizzard pd");
 347 +       if (r < 0)
 348 +       {
 349 +               printk(KERN_ERR "Can't get N8x0 Blizzard powerdown GPIO %d\n", N8X0_BLIZZARD_POWERDOWN_GPIO);
 350 +               return;
 351 +       }
 352 +       gpio_direction_output(N8X0_BLIZZARD_POWERDOWN_GPIO, 1);
 353 +
 354 +       blizzard_get_clocks();
 355 +       omapfb_set_ctrl_platform_data(&n8x0_blizzard_data);
 356 +
 357 +       printk(KERN_INFO "N8x0 Blizzard initialized");
 358 +}
 359 --- a/arch/arm/mach-omap2/Makefile
 360 +++ b/arch/arm/mach-omap2/Makefile
 361 @@ -209,6 +209,7 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)             += boar
 362                                            hsmmc.o \
 363                                            board-flash.o
 364  obj-$(CONFIG_MACH_NOKIA_N8X0)          += board-n8x0.o
 365 +obj-$(CONFIG_MACH_NOKIA_N8X0)          += board-n8x0-lcd.o
 366  obj-$(CONFIG_MACH_NOKIA_RM680)         += board-rm680.o \
 367                                            sdram-nokia.o \
 368                                            hsmmc.o