4 * Copyright (C) 2007-2008 OpenWrt.org
5 * Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
7 * This code was based on the information of the ZyXEL's firmware
8 * image format written by Kolja Waschk, can be found at:
9 * http://www.ixo.de/info/zyxel_uclinux
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License version 2 as published
13 * by the Free Software Foundation.
21 #include <unistd.h> /* for unlink() */
23 #include <getopt.h> /* for getopt() */
27 #include <endian.h> /* for __BYTE_ORDER */
28 #if defined(__CYGWIN__)
29 # include <byteswap.h>
34 #if (__BYTE_ORDER == __LITTLE_ENDIAN)
35 # define HOST_TO_LE16(x) (x)
36 # define HOST_TO_LE32(x) (x)
37 # define LE16_TO_HOST(x) (x)
38 # define LE32_TO_HOST(x) (x)
39 # define HOST_TO_BE16(x) bswap_16(x)
40 # define HOST_TO_BE32(x) bswap_32(x)
41 # define BE16_TO_HOST(x) bswap_16(x)
42 # define BE32_TO_HOST(x) bswap_32(x)
44 # define HOST_TO_BE16(x) (x)
45 # define HOST_TO_BE32(x) (x)
46 # define BE16_TO_HOST(x) (x)
47 # define BE32_TO_HOST(x) (x)
48 # define HOST_TO_LE16(x) bswap_16(x)
49 # define HOST_TO_LE32(x) bswap_32(x)
50 # define LE16_TO_HOST(x) bswap_16(x)
51 # define LE32_TO_HOST(x) bswap_32(x)
54 #define ALIGN(x,y) (((x)+((y)-1)) & ~((y)-1))
56 #define MAX_NUM_BLOCKS 8
57 #define MAX_ARG_COUNT 32
58 #define MAX_ARG_LEN 1024
59 #define FILE_BUF_LEN (16*1024)
69 uint32_t align
; /* alignment of this block */
70 char *file_name
; /* name of the file */
71 uint32_t file_size
; /* length of the file */
72 char *mmap_name
; /* name in the MMAP table */
73 int type
; /* block type */
78 #define BLOCK_TYPE_BOOTEXT 0
79 #define BLOCK_TYPE_RAW 1
87 #define MMAP_DATA_SIZE 1024
91 char *name
; /* model name */
92 char *desc
; /* description */
93 uint16_t vendor
; /* vendor id */
94 uint16_t model
; /* model id */
95 uint32_t flash_base
; /* flash base address */
96 uint32_t flash_size
; /* board flash size */
97 uint32_t code_start
; /* code start address */
98 uint32_t romio_offs
; /* offset of the firmware within the flash */
99 uint32_t bootext_size
; /* maximum size of bootext block */
109 struct board_info
*board
= NULL
;
111 struct fw_block blocks
[MAX_NUM_BLOCKS
];
112 struct fw_block
*bootext_block
= NULL
;
115 #define ADM5120_FLASH_BASE 0xBFC00000
116 #define ADM5120_CODE_START 0x80008000
118 /* TODO: check values for AR7 */
119 #define AR7_FLASH_BASE 0xB0000000
120 #define AR7_CODE_START 0x94008000
122 #define ATHEROS_FLASH_BASE 0xBFC00000
123 #define ATHEROS_CODE_START 0x80e00000
125 #define BOARD(n, d, v, m, fb, fs, cs, fo) { \
126 .name = (n), .desc=(d), \
127 .vendor = (v), .model = (m), \
128 .flash_base = (fb), .flash_size = (fs)<<20, \
129 .code_start = (cs), .romio_offs = (fo), \
130 .bootext_size = BOOTEXT_DEF_SIZE \
133 #define ADMBOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
134 ADM5120_FLASH_BASE, fs, ADM5120_CODE_START, 0x8000)
136 #define ADMBOARD2(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
137 ADM5120_FLASH_BASE, fs, ADM5120_CODE_START, 0x10000)
139 #define AR7BOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
140 AR7_FLASH_BASE, fs, AR7_CODE_START, 0x8000)
142 #define ATHEROSBOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
143 ATHEROS_FLASH_BASE, fs, ATHEROS_CODE_START, 0x30000)
145 static struct board_info boards
[] = {
147 * Infineon/ADMtek ADM5120 based boards
149 ADMBOARD2("ES-2024A", "ZyXEL ES-2024A", ZYNOS_MODEL_ES_2024A
, 4),
150 ADMBOARD2("ES-2024PWR", "ZyXEL ES-2024PWR", ZYNOS_MODEL_ES_2024PWR
, 4),
151 ADMBOARD2("ES-2108", "ZyXEL ES-2108", ZYNOS_MODEL_ES_2108
, 4),
152 ADMBOARD2("ES-2108-F", "ZyXEL ES-2108-F", ZYNOS_MODEL_ES_2108_F
, 4),
153 ADMBOARD2("ES-2108-G", "ZyXEL ES-2108-G", ZYNOS_MODEL_ES_2108_G
, 4),
154 ADMBOARD2("ES-2108-LC", "ZyXEL ES-2108-LC", ZYNOS_MODEL_ES_2108_LC
, 4),
155 ADMBOARD2("ES-2108PWR", "ZyXEL ES-2108PWR", ZYNOS_MODEL_ES_2108PWR
, 4),
156 ADMBOARD1("HS-100", "ZyXEL HomeSafe 100", ZYNOS_MODEL_HS_100
, 2),
157 ADMBOARD1("HS-100W", "ZyXEL HomeSafe 100W", ZYNOS_MODEL_HS_100W
, 2),
158 ADMBOARD1("P-334", "ZyXEL Prestige 334", ZYNOS_MODEL_P_334
, 2),
159 ADMBOARD1("P-334U", "ZyXEL Prestige 334U", ZYNOS_MODEL_P_334U
, 4),
160 ADMBOARD1("P-334W", "ZyXEL Prestige 334W", ZYNOS_MODEL_P_334W
, 2),
161 ADMBOARD1("P-334WH", "ZyXEL Prestige 334WH", ZYNOS_MODEL_P_334WH
, 4),
162 ADMBOARD1("P-334WHD", "ZyXEL Prestige 334WHD", ZYNOS_MODEL_P_334WHD
, 4),
163 ADMBOARD1("P-334WT", "ZyXEL Prestige 334WT", ZYNOS_MODEL_P_334WT
, 4),
164 ADMBOARD1("P-335", "ZyXEL Prestige 335", ZYNOS_MODEL_P_335
, 4),
165 ADMBOARD1("P-335Plus", "ZyXEL Prestige 335Plus", ZYNOS_MODEL_P_335PLUS
, 4),
166 ADMBOARD1("P-335U", "ZyXEL Prestige 335U", ZYNOS_MODEL_P_335U
, 4),
167 ADMBOARD1("P-335WT", "ZyXEL Prestige 335WT", ZYNOS_MODEL_P_335WT
, 4),
170 .name
= "P-2602HW-D1A",
171 .desc
= "ZyXEL P-2602HW-D1A",
172 .vendor
= ZYNOS_VENDOR_ID_ZYXEL
,
173 .model
= ZYNOS_MODEL_P_2602HW_D1A
,
174 .flash_base
= AR7_FLASH_BASE
,
175 .flash_size
= 4*1024*1024,
176 .code_start
= 0x94008000,
177 .romio_offs
= 0x20000,
178 .bootext_size
= BOOTEXT_DEF_SIZE
,
183 * Texas Instruments AR7 based boards
185 AR7BOARD1("P-660H-61", "ZyXEL P-660H-61", ZYNOS_MODEL_P_660H_61
, 2),
186 AR7BOARD1("P-660H-63", "ZyXEL P-660H-63", ZYNOS_MODEL_P_660H_63
, 2),
187 AR7BOARD1("P-660H-D1", "ZyXEL P-660H-D1", ZYNOS_MODEL_P_660H_D1
, 2),
188 AR7BOARD1("P-660H-D3", "ZyXEL P-660H-D3", ZYNOS_MODEL_P_660H_D3
, 2),
189 AR7BOARD1("P-660HW-61", "ZyXEL P-660HW-61", ZYNOS_MODEL_P_660HW_61
, 2),
190 AR7BOARD1("P-660HW-63", "ZyXEL P-660HW-63", ZYNOS_MODEL_P_660HW_63
, 2),
191 AR7BOARD1("P-660HW-67", "ZyXEL P-660HW-67", ZYNOS_MODEL_P_660HW_67
, 2),
192 AR7BOARD1("P-660HW-D1", "ZyXEL P-660HW-D1", ZYNOS_MODEL_P_660HW_D1
, 2),
193 AR7BOARD1("P-660HW-D3", "ZyXEL P-660HW-D3", ZYNOS_MODEL_P_660HW_D3
, 2),
194 AR7BOARD1("P-660R-61", "ZyXEL P-660R-61", ZYNOS_MODEL_P_660R_61
, 2),
195 AR7BOARD1("P-660R-61C", "ZyXEL P-660R-61C", ZYNOS_MODEL_P_660R_61C
, 2),
196 AR7BOARD1("P-660R-63", "ZyXEL P-660R-63", ZYNOS_MODEL_P_660R_63
, 2),
197 AR7BOARD1("P-660R-63C", "ZyXEL P-660R-63C", ZYNOS_MODEL_P_660R_63C
, 2),
198 AR7BOARD1("P-660R-67", "ZyXEL P-660R-67", ZYNOS_MODEL_P_660R_67
, 2),
199 AR7BOARD1("P-660R-D1", "ZyXEL P-660R-D1", ZYNOS_MODEL_P_660R_D1
, 2),
200 AR7BOARD1("P-660R-D3", "ZyXEL P-660R-D3", ZYNOS_MODEL_P_660R_D3
, 2),
204 .desc
= "O2 DSL Surf & Phone",
205 .vendor
= ZYNOS_VENDOR_ID_O2
,
206 .model
= ZYNOS_MODEL_O2SURF
,
207 .flash_base
= AR7_FLASH_BASE
,
208 .flash_size
= 8*1024*1024,
209 .code_start
= 0x94014000,
210 .romio_offs
= 0x40000,
211 .bootext_size
= BOOTEXT_DEF_SIZE
,
217 ATHEROSBOARD1("NBG-318S", "ZyXEL NBG-318S", ZYNOS_MODEL_NBG_318S
, 4),
225 #define ERR(fmt, ...) do { \
227 fprintf(stderr, "[%s] *** error: " fmt "\n", \
228 progname, ## __VA_ARGS__ ); \
231 #define ERRS(fmt, ...) do { \
234 fprintf(stderr, "[%s] *** error: " fmt ", %s\n", \
235 progname, ## __VA_ARGS__, strerror(save)); \
238 #define WARN(fmt, ...) do { \
239 fprintf(stderr, "[%s] *** warning: " fmt "\n", \
240 progname, ## __VA_ARGS__ ); \
243 #define DBG(lev, fmt, ...) do { \
244 if (verblevel < lev) \
246 fprintf(stderr, "[%s] " fmt "\n", progname, ## __VA_ARGS__ ); \
250 #define ERR_INVALID_IMAGE -2
258 FILE *stream
= (status
!= EXIT_SUCCESS
) ? stderr
: stdout
;
259 struct board_info
*board
;
261 fprintf(stream
, "Usage: %s [OPTIONS...]\n", progname
);
265 " -B <board> create image for the board specified with <board>.\n"
266 " valid <board> values:\n"
268 for (board
= boards
; board
->name
!= NULL
; board
++){
271 board
->name
, board
->desc
);
274 " -b <file>[:<align>]\n"
275 " add boot extension block to the image\n"
276 " -r <file>[:<align>]\n"
277 " add raw block to the image\n"
278 " -o <file> write output to the file <file>\n"
279 " -h show this screen\n"
290 str2u32(char *arg
, uint32_t *val
)
296 t
= strtoul(arg
, &err
, 0);
297 if (errno
|| (err
==arg
) || ((err
!= NULL
) && *err
)) {
307 str2u16(char *arg
, uint16_t *val
)
313 t
= strtoul(arg
, &err
, 0);
314 if (errno
|| (err
==arg
) || ((err
!= NULL
) && *err
) || (t
>= 0x10000)) {
323 str2u8(char *arg
, uint8_t *val
)
329 t
= strtoul(arg
, &err
, 0);
330 if (errno
|| (err
==arg
) || ((err
!= NULL
) && *err
) || (t
>= 0x100)) {
339 str2sig(char *arg
, uint32_t *sig
)
341 if (strlen(arg
) != 4)
344 *sig
= arg
[0] | (arg
[1] << 8) | (arg
[2] << 16) | (arg
[3] << 24);
351 parse_arg(char *arg
, char *buf
, char *argv
[])
359 memset(argv
, 0, MAX_ARG_COUNT
* sizeof(void *));
372 if (argl
>= MAX_ARG_LEN
) {
373 /* argument is too long */
374 argl
= MAX_ARG_LEN
-1;
377 memcpy(buf
, arg
, argl
);
380 for (i
= 0; i
< MAX_ARG_COUNT
; i
++) {
381 tok
= strsep(ap
, ":");
386 else if (tok
[0] == '\0') {
399 required_arg(char c
, char *arg
)
401 if (arg
== NULL
|| *arg
!= '-')
404 ERR("option -%c requires an argument\n", c
);
410 is_empty_arg(char *arg
)
421 csum_init(struct csum_state
*css
)
430 csum_update(uint8_t *p
, uint32_t len
, struct csum_state
*css
)
436 css
->sum
+= (css
->tmp
<< 8) + p
[0];
437 if (css
->sum
> 0xFFFF) {
446 for ( ; len
> 1; len
-= 2, p
+=2 ) {
447 css
->sum
+= (p
[0] << 8) + p
[1];
448 if (css
->sum
> 0xFFFF) {
462 csum_get(struct csum_state
*css
)
466 csum_update(&pad
, 1, css
);
471 csum_buf(uint8_t *p
, uint32_t len
)
473 struct csum_state css
;
476 csum_update(p
, len
, &css
);
477 return csum_get(&css
);
482 * routines to write data to the output file
485 write_out_data(FILE *outfile
, uint8_t *data
, size_t len
,
486 struct csum_state
*css
)
490 fwrite(data
, len
, 1, outfile
);
492 ERR("unable to write output file");
497 csum_update(data
, len
, css
);
505 write_out_padding(FILE *outfile
, size_t len
, uint8_t padc
,
506 struct csum_state
*css
)
509 size_t buflen
= sizeof(buf
);
511 memset(buf
, padc
, buflen
);
516 if (write_out_data(outfile
, buf
, buflen
, css
))
527 write_out_data_align(FILE *outfile
, uint8_t *data
, size_t len
, size_t align
,
528 struct csum_state
*css
)
533 res
= write_out_data(outfile
, data
, len
, css
);
537 padlen
= ALIGN(len
,align
) - len
;
538 res
= write_out_padding(outfile
, padlen
, 0xFF, css
);
545 write_out_header(FILE *outfile
, struct zyn_rombin_hdr
*hdr
)
547 struct zyn_rombin_hdr t
;
550 if (fseek(outfile
, 0, SEEK_SET
) != 0) {
551 ERRS("fseek failed on output file");
555 /* setup temporary header fields */
556 memset(&t
, 0, sizeof(t
));
557 t
.addr
= HOST_TO_BE32(hdr
->addr
);
558 memcpy(&t
.sig
, ROMBIN_SIGNATURE
, ROMBIN_SIG_LEN
);
560 t
.flags
= hdr
->flags
;
561 t
.osize
= HOST_TO_BE32(hdr
->osize
);
562 t
.csize
= HOST_TO_BE32(hdr
->csize
);
563 t
.ocsum
= HOST_TO_BE16(hdr
->ocsum
);
564 t
.ccsum
= HOST_TO_BE16(hdr
->ccsum
);
565 t
.mmap_addr
= HOST_TO_BE32(hdr
->mmap_addr
);
567 DBG(2, "hdr.addr = 0x%08x", hdr
->addr
);
568 DBG(2, "hdr.type = 0x%02x", hdr
->type
);
569 DBG(2, "hdr.osize = 0x%08x", hdr
->osize
);
570 DBG(2, "hdr.csize = 0x%08x", hdr
->csize
);
571 DBG(2, "hdr.flags = 0x%02x", hdr
->flags
);
572 DBG(2, "hdr.ocsum = 0x%04x", hdr
->ocsum
);
573 DBG(2, "hdr.ccsum = 0x%04x", hdr
->ccsum
);
574 DBG(2, "hdr.mmap_addr = 0x%08x", hdr
->mmap_addr
);
576 return write_out_data(outfile
, (uint8_t *)&t
, sizeof(t
), NULL
);
581 write_out_mmap(FILE *outfile
, struct fw_mmap
*mmap
, struct csum_state
*css
)
583 struct zyn_mmt_hdr
*mh
;
584 uint8_t buf
[MMAP_DATA_SIZE
];
589 memset(buf
, 0, sizeof(buf
));
591 mh
= (struct zyn_mmt_hdr
*)buf
;
593 /* TODO: needs to recreate the memory map too? */
596 /* Build user data section */
597 data
= buf
+sizeof(*mh
);
598 data
+= sprintf(data
, "Vendor 1 %d", board
->vendor
);
600 data
+= sprintf(data
, "Model 1 %d", BE16_TO_HOST(board
->model
));
602 /* TODO: make hardware version configurable? */
603 data
+= sprintf(data
, "HwVerRange 2 %d %d", 0, 0);
606 user_size
= (uint8_t *)data
- buf
;
607 mh
->user_start
= HOST_TO_BE32(mmap
->addr
+sizeof(*mh
));
608 mh
->user_end
= HOST_TO_BE32(mmap
->addr
+user_size
);
609 mh
->csum
= HOST_TO_BE16(csum_buf(buf
+sizeof(*mh
), user_size
));
611 res
= write_out_data(outfile
, buf
, sizeof(buf
), css
);
618 block_stat_file(struct fw_block
*block
)
623 if (block
->file_name
== NULL
)
626 res
= stat(block
->file_name
, &st
);
628 ERRS("stat failed on %s", block
->file_name
);
632 block
->file_size
= st
.st_size
;
638 read_magic(uint16_t *magic
)
644 f
= fopen(bootext_block
->file_name
,"r");
646 ERRS("unable to open file: %s", bootext_block
->file_name
);
651 fread(magic
, 2, 1, f
);
653 ERRS("unable to read from file: %s", bootext_block
->file_name
);
667 write_out_file(FILE *outfile
, char *name
, size_t len
, struct csum_state
*css
)
669 char buf
[FILE_BUF_LEN
];
670 size_t buflen
= sizeof(buf
);
674 DBG(2, "writing out file, name=%s, len=%d",
680 ERRS("unable to open file: %s", name
);
688 /* read data from source file */
690 fread(buf
, buflen
, 1, f
);
692 ERRS("unable to read from file: %s",name
);
697 res
= write_out_data(outfile
, buf
, buflen
, css
);
710 write_out_block(FILE *outfile
, struct fw_block
*block
, struct csum_state
*css
)
717 if (block
->file_name
== NULL
)
720 if (block
->file_size
== 0)
723 res
= write_out_file(outfile
, block
->file_name
,
724 block
->file_size
, css
);
730 write_out_image(FILE *outfile
)
732 struct fw_block
*block
;
734 struct zyn_rombin_hdr hdr
;
735 struct csum_state css
;
742 /* setup header fields */
743 memset(&hdr
, 0, sizeof(hdr
));
744 hdr
.addr
= board
->code_start
;
745 hdr
.type
= OBJECT_TYPE_BOOTEXT
;
746 hdr
.flags
= ROMBIN_FLAG_OCSUM
;
748 offset
= board
->romio_offs
;
750 res
= write_out_header(outfile
, &hdr
);
754 offset
+= sizeof(hdr
);
757 res
= write_out_block(outfile
, bootext_block
, &css
);
761 offset
+= bootext_block
->file_size
;
762 if (offset
> (board
->romio_offs
+ board
->bootext_size
)) {
763 ERR("bootext file '%s' is too big", bootext_block
->file_name
);
767 padlen
= ALIGN(offset
, MMAP_ALIGN
) - offset
;
768 res
= write_out_padding(outfile
, padlen
, 0xFF, &css
);
774 mmap
.addr
= board
->flash_base
+ offset
;
775 res
= write_out_mmap(outfile
, &mmap
, &css
);
779 offset
+= MMAP_DATA_SIZE
;
781 if ((offset
- board
->romio_offs
) < board
->bootext_size
) {
782 padlen
= board
->romio_offs
+ board
->bootext_size
- offset
;
783 res
= write_out_padding(outfile
, padlen
, 0xFF, &css
);
788 DBG(2, "bootext end at %08x", offset
);
791 for (i
= 0; i
< num_blocks
; i
++) {
794 if (block
->type
== BLOCK_TYPE_BOOTEXT
)
797 padlen
= ALIGN(offset
, block
->align
) - offset
;
798 res
= write_out_padding(outfile
, padlen
, 0xFF, &css
);
803 res
= write_out_block(outfile
, block
, &css
);
806 offset
+= block
->file_size
;
809 padlen
= ALIGN(offset
, 4) - offset
;
810 res
= write_out_padding(outfile
, padlen
, 0xFF, &css
);
815 csum
= csum_get(&css
);
816 hdr
.mmap_addr
= mmap
.addr
;
819 res
= read_magic(&hdr
.ocsum
);
822 hdr
.ocsum
= BE16_TO_HOST(hdr
.ocsum
);
824 if (csum
<= hdr
.ocsum
)
825 t
= hdr
.ocsum
- csum
;
827 t
= hdr
.ocsum
- csum
- 1;
829 DBG(2, "ocsum=%04x, csum=%04x, fix=%04x", hdr
.ocsum
, csum
, t
);
832 res
= write_out_data(outfile
, (uint8_t *)&t
, 2, NULL
);
837 res
= write_out_header(outfile
, &hdr
);
844 find_board(char *name
)
846 struct board_info
*ret
;
847 struct board_info
*board
;
850 for (board
= boards
; board
->name
!= NULL
; board
++){
851 if (strcasecmp(name
, board
->name
) == 0) {
862 parse_opt_board(char ch
, char *arg
)
865 DBG(1,"parsing board option: -%c %s", ch
, arg
);
868 ERR("only one board option allowed");
872 if (required_arg(ch
, arg
))
875 board
= find_board(arg
);
877 ERR("invalid/unknown board specified: %s", arg
);
886 parse_opt_ofname(char ch
, char *arg
)
889 if (ofname
!= NULL
) {
890 ERR("only one output file allowed");
894 if (required_arg(ch
, arg
))
904 parse_opt_block(char ch
, char *arg
)
906 char buf
[MAX_ARG_LEN
];
907 char *argv
[MAX_ARG_COUNT
];
910 struct fw_block
*block
;
913 if ( num_blocks
>= MAX_NUM_BLOCKS
) {
914 ERR("too many blocks specified");
918 block
= &blocks
[num_blocks
++];
920 /* setup default field values */
926 ERR("only one boot extension block allowed");
929 block
->type
= BLOCK_TYPE_BOOTEXT
;
930 bootext_block
= block
;
933 block
->type
= BLOCK_TYPE_RAW
;
937 argc
= parse_arg(arg
, buf
, argv
);
941 if (is_empty_arg(p
)) {
942 ERR("no file specified in %s", arg
);
945 block
->file_name
= strdup(p
);
946 if (block
->file_name
== NULL
) {
947 ERR("not enough memory");
952 if (block
->type
== BLOCK_TYPE_BOOTEXT
)
956 if (!is_empty_arg(p
)) {
957 if (str2u32(p
, &block
->align
) != 0) {
958 ERR("invalid block align in %s", arg
);
968 calc_block_offsets(int type
, uint32_t *offset
)
970 struct fw_block
*block
;
975 DBG(1,"calculating block offsets, starting with %lu",
979 for (i
= 0; i
< num_blocks
; i
++) {
982 if (block
->type
!= type
)
985 next_offs
= ALIGN(*offset
, block
->align
);
986 avail
= board
->flash_size
- board
->romio_offs
- next_offs
;
987 if (next_offs
+ block
->file_size
> avail
) {
988 ERR("file %s is too big, offset = %u, size=%u,"
989 " align = %u", block
->file_name
,
991 (unsigned)block
->file_size
,
992 (unsigned)block
->align
);
997 block
->padlen
= next_offs
- *offset
;
998 *offset
+= block
->file_size
;
1005 process_blocks(void)
1007 struct fw_block
*block
;
1012 /* collecting file stats */
1013 for (i
= 0; i
< num_blocks
; i
++) {
1015 res
= block_stat_file(block
);
1020 offset
= board
->romio_offs
+ bootext_block
->file_size
;
1021 res
= calc_block_offsets(BLOCK_TYPE_RAW
, &offset
);
1028 main(int argc
, char *argv
[])
1030 int optinvalid
= 0; /* flag for invalid option */
1032 int res
= EXIT_FAILURE
;
1036 progname
=basename(argv
[0]);
1038 opterr
= 0; /* could not print standard getopt error messages */
1042 c
= getopt(argc
, argv
, "b:B:ho:r:v");
1049 optinvalid
= parse_opt_block(c
,optarg
);
1052 optinvalid
= parse_opt_board(c
,optarg
);
1055 optinvalid
= parse_opt_ofname(c
,optarg
);
1061 usage(EXIT_SUCCESS
);
1067 if (optinvalid
!= 0 ) {
1068 ERR("invalid option: -%c", optopt
);
1073 if (board
== NULL
) {
1074 ERR("no board specified");
1078 if (ofname
== NULL
) {
1079 ERR("no output file specified");
1083 if (optind
< argc
) {
1084 ERR("invalid option: %s", argv
[optind
]);
1088 if (process_blocks() != 0) {
1092 outfile
= fopen(ofname
, "w");
1093 if (outfile
== NULL
) {
1094 ERRS("could not open \"%s\" for writing", ofname
);
1098 if (write_out_image(outfile
) != 0)
1101 DBG(1,"Image file %s completed.", ofname
);
1108 if (res
!= EXIT_SUCCESS
) {
This page took 0.109715 seconds and 5 git commands to generate.