docs/network.tex

   1 The network configuration in Kamikaze is stored in \texttt{/etc/config/network}
   2 and is divided into interface configurations.
   3 Each interface configuration either refers directly to an ethernet/wifi
   4 interface (\texttt{eth0}, \texttt{wl0}, ..) or to a bridge containing multiple interfaces.
   5 It looks like this:
   6
   7 \begin{Verbatim}
   8 config interface     "lan"
   9     option ifname    "eth0"
  10     option proto     "static"
  11     option ipaddr    "192.168.1.1"
  12     option netmask   "255.255.255.0"
  13     option gateway   "192.168.1.254"
  14     option dns       "192.168.1.254"
  15 \end{Verbatim}
  16
  17 \texttt{ifname} specifies the Linux interface name.
  18 If you want to use bridging on one or more interfaces, set \texttt{ifname} to a list
  19 of interfaces and add:
  20 \begin{Verbatim}
  21     option type     "bridge"
  22 \end{Verbatim}
  23
  24 It is possible to use VLAN tagging on an interface simply by adding the VLAN IDs
  25 to it, e.g. \texttt{eth0.1}. These can be nested as well.
  26
  27 This sets up a simple static configuration for \texttt{eth0}. \texttt{proto} specifies the
  28 protocol used for the interface. The default image usually provides \texttt{'none'}
  29 \texttt{'static'}, \texttt{'dhcp'} and \texttt{'pppoe'}. Others can be added by installing additional
  30 packages.
  31
  32 When using the \texttt{'static'} method like in the example, the  options \texttt{ipaddr} and
  33 \texttt{netmask} are mandatory, while \texttt{gateway} and \texttt{dns} are optional.
  34 You can specify more than one DNS server, separated with spaces.
  35
  36 DHCP currently only accepts \texttt{ipaddr} (IP address to request from the server)
  37 and \texttt{hostname} (client hostname identify as) - both are optional.
  38
  39 PPP based protocols (\texttt{pppoe}, \texttt{pptp}, ...) accept these options:
  40 \begin{itemize}
  41     \item{username} \\
  42         The PPP username (usually with PAP authentication)
  43     \item{password} \\
  44         The PPP password
  45     \item{keepalive} \\
  46         Ping the PPP server (using LCP). The value of this option
  47         specifies the maximum number of failed pings before reconnecting.
  48         The ping interval defaults to 5, but can be changed by appending
  49         ",<interval>" to the keepalive value
  50     \item{demand} \\
  51         Use Dial on Demand (value specifies the maximum idle time.
  52
  53     \item{server: (pptp)} \\
  54         The remote pptp server IP
  55 \end{itemize}
  56
  57 For all protocol types, you can also specify the MTU by using the \texttt{mtu} option.
  58
  59 \subsubsection{Setting up static routes}
  60
  61 You can set up static routes for a specific interface that will be brought up
  62 after the interface is configured.
  63
  64 Simply add a config section like this:
  65
  66 \begin{Verbatim}
  67 config route foo
  68         option interface lan
  69         option target 1.1.1.0
  70         option netmask 255.255.255.0
  71         option gateway 192.168.1.1
  72 \end{Verbatim}
  73
  74 The name for the route section is optional, the \texttt{interface}, \texttt{target} and
  75 \texttt{gateway} options are mandatory.
  76 Leaving out the \texttt{netmask} option will turn the route into a host route.
  77
  78 \subsubsection{Setting up the switch (currently broadcom only)}
  79
  80 The switch configuration is set by adding a \texttt{'switch'} config section.
  81 Example:
  82
  83 \begin{Verbatim}
  84 config switch       "eth0"
  85     option vlan0    "1 2 3 4 5*"
  86     option vlan1    "0 5"
  87 \end{Verbatim}
  88
  89 On Broadcom hardware the section name needs to be eth0, as the switch driver
  90 does not detect the switch on any other physical device.
  91 Every vlan option needs to have the name vlan<n> where <n> is the VLAN number
  92 as used in the switch driver.
  93 As value it takes a list of ports with these optional suffixes:
  94
  95 \begin{itemize}
  96     \item{\texttt{'*'}:}
  97         Set the default VLAN (PVID) of the Port to the current VLAN
  98     \item{\texttt{'u'}:}
  99         Force the port to be untagged
 100     \item{\texttt{'t'}:}
 101         Force the port to be tagged
 102 \end{itemize}
 103
 104 The CPU port defaults to tagged, all other ports to untagged.
 105 On Broadcom hardware the CPU port is always 5. The other ports may vary with
 106 different hardware.
 107
 108 For instance, if you wish to have 3 vlans, like one 3-port switch, 1 port in a
 109 DMZ, and another one as your WAN interface, use the following configuration :
 110
 111 \begin{Verbatim}
 112 config switch       "eth0"
 113     option vlan0    "1 2 3 5*"
 114     option vlan1    "0 5"
 115     option vlan2    "4 5"
 116 \end{Verbatim}
 117
 118 \subsubsection{Setting up IPv6 connectivity}
 119
 120 OpenWrt supports IPv6 connectivity using PPP, Tunnel brokers or static
 121 assignment.
 122
 123 If you use PPP, IPv6 will be setup using IP6CP and there is nothing to
 124 configure.
 125
 126 To setup an IPv6 tunnel to a tunnel broker, you have to edit the
 127 \texttt{/etc/config/6tunnel} file and change the settings accordingly :
 128
 129 \begin{Verbatim}
 130 config 6tunnel
 131         option tnlifname     'sixbone'
 132         option remoteip4        '1.0.0.1'
 133         option localip4         '1.0.0.2'
 134         option localip6         '2001::DEAD::BEEF::1'
 135         option prefix           '/64'
 136 \end{Verbatim}
 137
 138 \begin{itemize}
 139     \item{\texttt{'tnlifname'}:}
 140         Set the interface name of the IPv6 in IPv4 tunnel
 141     \item{\texttt{'remoteip4'}:}
 142         IP address of the remote end to establish the 6in4 tunnel.
 143         This address is given by the tunnel broker
 144     \item{\texttt{'localip4'}:}
 145         IP address of your router to establish the 6in4 tunnel.
 146         It will usually match your WAN IP address.
 147     \item{\texttt{'localip6'}:}
 148         IPv6 address to setup on your tunnel side
 149         This address is given by the tunnel broker
 150     \item{\texttt{'prefix'}:}
 151         IPv6 prefix to setup on the LAN.
 152 \end{itemize}
 153
 154 IPv6 static addressing is also supported using a similar setup as
 155 IPv4 but with the \texttt{ip6} prefixing (when applicable).
 156
 157 \begin{Verbatim}
 158 config interface     "lan"
 159     option ifname    "eth0"
 160     option proto     "static"
 161     option ip6addr    "fe80::200:ff:fe00:0/64"
 162     option ip6gw     "2001::DEAF:BEE:1"
 163 \end{Verbatim}