automatic subtarget enumaration
[openwrt.git] / target / linux / s3c24xx / files-2.6.30 / arch / arm / mach-s3c2442 / gta02-pm-gps.c
1 /*
2 * GPS Power Management code for the Openmoko Freerunner GSM Phone
3 *
4 * (C) 2007-2009 by Openmoko Inc.
5 * Author: Harald Welte <laforge@openmoko.org>
6 * All rights reserved.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation
11 *
12 */
13
14 #include <linux/module.h>
15 #include <linux/init.h>
16 #include <linux/kernel.h>
17 #include <linux/delay.h>
18 #include <linux/platform_device.h>
19
20 #include <mach/hardware.h>
21 #include <mach/cpu.h>
22
23 #include <asm/mach-types.h>
24
25 #include <mach/gta02.h>
26 #include <linux/mfd/pcf50633/core.h>
27 #include <linux/mfd/pcf50633/pmic.h>
28
29 #include <linux/regulator/consumer.h>
30 #include <linux/err.h>
31
32 struct gta02_pm_gps_data {
33 #ifdef CONFIG_PM
34 int keep_on_in_suspend;
35 #endif
36 int power_was_on;
37 struct regulator *regulator;
38 };
39
40 static struct gta02_pm_gps_data gta02_gps;
41
42 int gta02_pm_gps_is_on(void)
43 {
44 return gta02_gps.power_was_on;
45 }
46 EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on);
47
48 /* This is the POWERON pin */
49 static void gps_pwron_set(int on)
50 {
51 if (on) {
52 /* return UART pins to being UART pins */
53 s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_TXD1);
54 /* remove pulldown now it won't be floating any more */
55 s3c2410_gpio_pullup(S3C2410_GPH5, 0);
56
57 if (!gta02_gps.power_was_on)
58 regulator_enable(gta02_gps.regulator);
59 } else {
60 /*
61 * take care not to power unpowered GPS from UART TX
62 * return them to GPIO and force low
63 */
64 s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
65 s3c2410_gpio_setpin(S3C2410_GPH4, 0);
66 /* don't let RX from unpowered GPS float */
67 s3c2410_gpio_pullup(S3C2410_GPH5, 1);
68 if (gta02_gps.power_was_on)
69 regulator_disable(gta02_gps.regulator);
70 }
71 }
72
73 static int gps_pwron_get(void)
74 {
75 return regulator_is_enabled(gta02_gps.regulator);
76 }
77
78 #ifdef CONFIG_PM
79 /* This is the flag for keeping gps ON during suspend */
80 static void gps_keep_on_in_suspend_set(int on)
81 {
82 gta02_gps.keep_on_in_suspend = on;
83 }
84
85 static int gps_keep_on_in_suspend_get(void)
86 {
87 return gta02_gps.keep_on_in_suspend;
88 }
89 #endif
90
91 static ssize_t power_gps_read(struct device *dev,
92 struct device_attribute *attr, char *buf)
93 {
94 int ret = 0;
95
96 if (!strcmp(attr->attr.name, "power_on") ||
97 !strcmp(attr->attr.name, "pwron")) {
98 ret = gps_pwron_get();
99 #ifdef CONFIG_PM
100 } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
101 ret = gps_keep_on_in_suspend_get();
102 #endif
103 }
104 if (ret)
105 return strlcpy(buf, "1\n", 3);
106 else
107 return strlcpy(buf, "0\n", 3);
108 }
109
110 static ssize_t power_gps_write(struct device *dev,
111 struct device_attribute *attr, const char *buf,
112 size_t count)
113 {
114 unsigned long on = simple_strtoul(buf, NULL, 10);
115
116 if (!strcmp(attr->attr.name, "power_on") ||
117 !strcmp(attr->attr.name, "pwron")) {
118 gps_pwron_set(on);
119 gta02_gps.power_was_on = !!on;
120 #ifdef CONFIG_PM
121 } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
122 gps_keep_on_in_suspend_set(on);
123 #endif
124 }
125 return count;
126 }
127
128 #ifdef CONFIG_PM
129 static int gta02_pm_gps_suspend(struct platform_device *pdev,
130 pm_message_t state)
131 {
132 if (!gta02_gps.keep_on_in_suspend ||
133 !gta02_gps.power_was_on)
134 gps_pwron_set(0);
135 else
136 dev_warn(&pdev->dev, "GTA02: keeping gps ON "
137 "during suspend\n");
138 return 0;
139 }
140
141 static int gta02_pm_gps_resume(struct platform_device *pdev)
142 {
143 if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on)
144 gps_pwron_set(1);
145
146 return 0;
147 }
148
149 static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write);
150 #else
151 #define gta02_pm_gps_suspend NULL
152 #define gta02_pm_gps_resume NULL
153 #endif
154
155 static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write);
156
157 static struct attribute *gta02_gps_sysfs_entries[] = {
158 &dev_attr_power_on.attr,
159 #ifdef CONFIG_PM
160 &dev_attr_keep_on_in_suspend.attr,
161 #endif
162 NULL
163 };
164
165 static struct attribute_group gta02_gps_attr_group = {
166 .name = NULL,
167 .attrs = gta02_gps_sysfs_entries,
168 };
169
170 static int __init gta02_pm_gps_probe(struct platform_device *pdev)
171 {
172 gta02_gps.regulator = regulator_get(&pdev->dev, "RF_3V");
173 if (IS_ERR(gta02_gps.regulator)) {
174 dev_err(&pdev->dev, "probe failed %ld\n",
175 PTR_ERR(gta02_gps.regulator));
176
177 return PTR_ERR(gta02_gps.regulator);
178 }
179
180 dev_info(&pdev->dev, "starting\n");
181
182 /*
183 * Here we should call the code that handles the set GPS power
184 * off action. But, the regulator API does not allow us to
185 * reassert regulator state, and when we read the regulator API
186 * logical state, it can differ from the actual state, So
187 * a workaround for this is to just set the regulator off in the
188 * PMU directly. Because that's different from normal flow, we
189 * have to reproduce other things from the OFF action here too.
190 */
191
192 /*
193 * u-boot enables LDO5 (GPS), which doesn't make sense and
194 * causes confusion. We therefore disable the regulator here.
195 */
196 pcf50633_reg_write(gta02_pcf, PCF50633_REG_LDO5ENA, 0);
197
198 /*
199 * take care not to power unpowered GPS from UART TX
200 * return them to GPIO and force low
201 */
202 s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
203 s3c2410_gpio_setpin(S3C2410_GPH4, 0);
204 /* don't let RX from unpowered GPS float */
205 s3c2410_gpio_pullup(S3C2410_GPH5, 1);
206
207 return sysfs_create_group(&pdev->dev.kobj,
208 &gta02_gps_attr_group);
209 }
210
211 static int gta02_pm_gps_remove(struct platform_device *pdev)
212 {
213 regulator_put(gta02_gps.regulator);
214 sysfs_remove_group(&pdev->dev.kobj, &gta02_gps_attr_group);
215 return 0;
216 }
217
218 static struct platform_driver gta02_pm_gps_driver = {
219 .probe = gta02_pm_gps_probe,
220 .remove = gta02_pm_gps_remove,
221 .suspend = gta02_pm_gps_suspend,
222 .resume = gta02_pm_gps_resume,
223 .driver = {
224 .name = "gta02-pm-gps",
225 },
226 };
227
228 static int __devinit gta02_pm_gps_init(void)
229 {
230 return platform_driver_register(&gta02_pm_gps_driver);
231 }
232
233 static void gta02_pm_gps_exit(void)
234 {
235 platform_driver_unregister(&gta02_pm_gps_driver);
236 }
237
238 module_init(gta02_pm_gps_init);
239 module_exit(gta02_pm_gps_exit);
240
241 MODULE_LICENSE("GPL");
242 MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
This page took 0.084291 seconds and 5 git commands to generate.