bcm63xx: add initial support for bcm6368 boards
[openwrt.git] / package / ltq-dsl / src / ifxmips_atm_fw_regs_ar9.h
1 /******************************************************************************
2 **
3 ** FILE NAME : ifxmips_atm_fw_regs_ar9.h
4 ** PROJECT : UEIP
5 ** MODULES : ATM (ADSL)
6 **
7 ** DATE : 1 AUG 2005
8 ** AUTHOR : Xu Liang
9 ** DESCRIPTION : ATM Driver (Firmware Registers)
10 ** COPYRIGHT : Copyright (c) 2006
11 ** Infineon Technologies AG
12 ** Am Campeon 1-12, 85579 Neubiberg, Germany
13 **
14 ** This program is free software; you can redistribute it and/or modify
15 ** it under the terms of the GNU General Public License as published by
16 ** the Free Software Foundation; either version 2 of the License, or
17 ** (at your option) any later version.
18 **
19 ** HISTORY
20 ** $Date $Author $Comment
21 ** 4 AUG 2005 Xu Liang Initiate Version
22 ** 23 OCT 2006 Xu Liang Add GPL header.
23 ** 9 JAN 2007 Xu Liang First version got from Anand (IC designer)
24 *******************************************************************************/
25
26
27
28 #ifndef IFXMIPS_ATM_FW_REGS_AR9_H
29 #define IFXMIPS_ATM_FW_REGS_AR9_H
30
31
32
33 /*
34 * Host-PPE Communication Data Address Mapping
35 */
36 #define FW_VER_ID ((volatile struct fw_ver_id *) SB_BUFFER(0x2001))
37 #define CFG_WRX_HTUTS SB_BUFFER(0x2400) /* WAN RX HTU Table Size, must be configured before enable PPE firmware. */
38 #define CFG_WRX_QNUM SB_BUFFER(0x2401) /* WAN RX Queue Number */
39 #define CFG_WRX_DCHNUM SB_BUFFER(0x2402) /* WAN RX DMA Channel Number, no more than 8, must be configured before enable PPE firmware. */
40 #define CFG_WTX_DCHNUM SB_BUFFER(0x2403) /* WAN TX DMA Channel Number, no more than 16, must be configured before enable PPE firmware. */
41 #define CFG_WRDES_DELAY SB_BUFFER(0x2404) /* WAN Descriptor Write Delay, must be configured before enable PPE firmware. */
42 #define WRX_DMACH_ON SB_BUFFER(0x2405) /* WAN RX DMA Channel Enable, must be configured before enable PPE firmware. */
43 #define WTX_DMACH_ON SB_BUFFER(0x2406) /* WAN TX DMA Channel Enable, must be configured before enable PPE firmware. */
44 #define WRX_HUNT_BITTH SB_BUFFER(0x2407) /* WAN RX HUNT Threshold, must be between 2 to 8. */
45 #define WRX_QUEUE_CONFIG(i) ((struct wrx_queue_config*) SB_BUFFER(0x2500 + (i) * 20))
46 #define WRX_QUEUE_CONTEXT(i) ((struct wrx_queue_context*) SB_BUFFER(0x2504 + (i) * 20))
47 #define WRX_DMA_CHANNEL_CONFIG(i) ((struct wrx_dma_channel_config*) SB_BUFFER(0x2640 + (i) * 7))
48 #define WRX_DESC_CONTEXT(i) ((struct wrx_desc_context*) SB_BUFFER(0x2643 + (i) * 7))
49 #define WTX_PORT_CONFIG(i) ((struct wtx_port_config*) SB_BUFFER(0x2440 + (i)))
50 #define WTX_QUEUE_CONFIG(i) ((struct wtx_queue_config*) SB_BUFFER(0x3800 + (i) * 27))
51 #define WTX_DMA_CHANNEL_CONFIG(i) ((struct wtx_dma_channel_config*) SB_BUFFER(0x3801 + (i) * 27))
52 #define WAN_MIB_TABLE ((struct wan_mib_table*) SB_BUFFER(0x2410))
53 #define HTU_ENTRY(i) ((struct htu_entry*) SB_BUFFER(0x2010 + (i)))
54 #define HTU_MASK(i) ((struct htu_mask*) SB_BUFFER(0x2030 + (i)))
55 #define HTU_RESULT(i) ((struct htu_result*) SB_BUFFER(0x2050 + (i)))
56
57 #if defined(ENABLE_ATM_RETX) && ENABLE_ATM_RETX
58
59 #define RETX_MODE_CFG ((volatile struct Retx_mode_cfg *) SB_BUFFER(0x2408))
60 #define RETX_TSYNC_CFG ((volatile struct Retx_Tsync_cfg *) SB_BUFFER(0x2409))
61 #define RETX_TD_CFG ((volatile struct Retx_Td_cfg *) SB_BUFFER(0x240A))
62 #define RETX_MIB_TIMER_CFG ((volatile struct Retx_MIB_Timer_cfg *) SB_BUFFER(0x240B))
63 #define RETX_PLAYOUT_BUFFER_BASE SB_BUFFER(0x240D)
64 #define RETX_SERVICE_HEADER_CFG SB_BUFFER(0x240E)
65 #define RETX_MASK_HEADER_CFG SB_BUFFER(0x240F)
66
67 #define RETX_ADSL_PPE_INTF ((volatile struct Retx_adsl_ppe_intf *) PPE_REG_ADDR(0x0D78))
68 #define BAD_REC_RETX_ADSL_PPE_INTF ((volatile struct Retx_adsl_ppe_intf *) SB_BUFFER(0x23AC))
69 #define FIRST_BAD_REC_RETX_ADSL_PPE_INTF ((volatile struct Retx_adsl_ppe_intf *) SB_BUFFER(0x23AE))
70
71 #define PB_BUFFER_USAGE SB_BUFFER(0x2100)
72 #define DTU_STAT_INFO ((volatile struct DTU_stat_info *) SB_BUFFER(0x2180))
73 #define DTU_VLD_STAT SB_BUFFER(0x2380)
74
75
76 //=====================================================================
77 // retx firmware mib, for debug purpose
78 // address : 0x2388 - 0x238F
79 // size : 8
80 //=====================================================================
81 #define URETX_RX_TOTAL_DTU SB_BUFFER(0x2388)
82 #define URETX_RX_BAD_DTU SB_BUFFER(0x2389)
83 #define URETX_RX_GOOD_DTU SB_BUFFER(0x238A)
84 #define URETX_RX_CORRECTED_DTU SB_BUFFER(0x238B)
85 #define URETX_RX_OUTOFDATE_DTU SB_BUFFER(0x238C)
86 #define URETX_RX_DUPLICATE_DTU SB_BUFFER(0x238D)
87 #define URETX_RX_TIMEOUT_DTU SB_BUFFER(0x238E)
88
89 #define URETX_ALPHA_SWITCH_TO_HUNT_TIMES SB_BUFFER(0x238F)
90
91 // cell counter for debug purpose
92 #define WRX_BC0_CELL_NUM SB_BUFFER(0x23E0)
93 #define WRX_BC0_DROP_CELL_NUM SB_BUFFER(0x23E1)
94 #define WRX_BC0_NONRETX_CELL_NUM SB_BUFFER(0x23E2)
95 #define WRX_BC0_RETX_CELL_NUM SB_BUFFER(0x23E3)
96 #define WRX_BC0_OUTOFDATE_CELL_NUM SB_BUFFER(0x23E4)
97 #define WRX_BC0_DIRECTUP_NUM SB_BUFFER(0x23E5)
98 #define WRX_BC0_PBW_TOTAL_NUM SB_BUFFER(0x23E6)
99 #define WRX_BC0_PBW_SUCC_NUM SB_BUFFER(0x23E7)
100 #define WRX_BC0_PBW_FAIL_NUM SB_BUFFER(0x23E8)
101 #define WRX_BC1_CELL_NUM SB_BUFFER(0x23E9)
102
103 // debug info (interface)
104
105 #define DBG_DTU_INTF_WRPTR SB_BUFFER(0x2390)
106 #define DBG_INTF_FCW_DUP_CNT SB_BUFFER(0x2391)
107 #define DBG_INTF_SID_CHANGE_IN_DTU_CNT SB_BUFFER(0x2392)
108 #define DBG_INTF_LCW_DUP_CNT SB_BUFFER(0x2393)
109
110 #define DBG_RFBI_DONE_INT_CNT SB_BUFFER(0x2394)
111 #define DBG_DREG_BEG_END SB_BUFFER(0x2395)
112 #define DBG_RFBI_BC0_INVALID_CNT SB_BUFFER(0x2396)
113 #define DBG_RFBI_LAST_T SB_BUFFER(0x2397)
114
115 #define DBG_RFBI_INTV0 SB_BUFFER(0x23EE)
116 #define DBG_RFBI_INTV1 SB_BUFFER(0x23EF)
117
118 #define DBG_INTF_INFO(i) ((volatile struct Retx_adsl_ppe_intf_rec *) SB_BUFFER(0x23F0 + i))
119
120 // Internal status
121 #define URetx_curr_time SB_BUFFER(0x2398)
122 #define URetx_sec_counter SB_BUFFER(0x2399)
123 #define RxCURR_EFB SB_BUFFER(0x239A)
124 #define RxDTURetransmittedCNT SB_BUFFER(0x239B)
125
126 //=====================================================================
127 // standardized MIB counter
128 // address : 0x239C - 0x239F
129 // size : 4
130 //=====================================================================
131 #define RxLastEFBCNT SB_BUFFER(0x239C)
132 #define RxDTUCorrectedCNT SB_BUFFER(0x239D)
133 #define RxDTUCorruptedCNT SB_BUFFER(0x239E)
134 #define RxRetxDTUUncorrectedCNT SB_BUFFER(0x239F)
135
136
137 //=====================================================================
138 // General URetx Context
139 // address : 0x23A0 - 0x23AF
140 // size : 16
141 //=====================================================================
142 #define NEXT_DTU_SID_OUT SB_BUFFER(0x23A0)
143 #define LAST_DTU_SID_IN SB_BUFFER(0x23A1)
144 #define NEXT_CELL_SID_OUT SB_BUFFER(0x23A2)
145 #define ISR_CELL_ID SB_BUFFER(0x23A3)
146 #define PB_CELL_SEARCH_IDX SB_BUFFER(0x23A4)
147 #define PB_READ_PEND_FLAG SB_BUFFER(0x23A5)
148 #define RFBI_FIRST_CW SB_BUFFER(0x23A6)
149 #define RFBI_BAD_CW SB_BUFFER(0x23A7)
150 #define RFBI_INVALID_CW SB_BUFFER(0x23A8)
151 #define RFBI_RETX_CW SB_BUFFER(0x23A9)
152 #define RFBI_CHK_DTU_STATUS SB_BUFFER(0x23AA)
153
154 //=====================================================================
155 // per PVC counter for RX error_pdu and correct_pdu
156 // address : 0x23B0 - 0x23CF
157 // size : 32
158 //=====================================================================
159 #define WRX_PER_PVC_CORRECT_PDU_BASE SB_BUFFER(0x23B0)
160 #define WRX_PER_PVC_ERROR_PDU_BASE SB_BUFFER(0x23C0)
161
162 #define __WRXCTXT_L2_RdPtr(i) SB_BUFFER(0x2422 + (i))
163 #define __WRXCTXT_L2Pages(i) SB_BUFFER(0x2424 + (i))
164
165 #define __WTXCTXT_TC_WRPTR(i) SB_BUFFER(0x2450 + (i))
166 #define __WRXCTXT_PortState(i) SB_BUFFER(0x242A + (i))
167
168 #endif
169
170
171
172 #endif // IFXMIPS_ATM_FW_REGS_AR9_H
This page took 0.054713 seconds and 5 git commands to generate.