4 #include <linux/types.h>
9 /*** PHY Registers ***/
12 #define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */
13 #define B43_PHYROUTE_BASE 0x0000 /* Base registers */
14 #define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */
15 #define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */
16 #define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */
18 /* CCK (B-PHY) registers. */
19 #define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE)
20 /* N-PHY registers. */
21 #define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE)
22 /* N-PHY BMODE registers. */
23 #define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE)
24 /* OFDM (A-PHY) registers. */
25 #define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY)
26 /* Extended G-PHY registers. */
27 #define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY)
29 /* OFDM (A) PHY Registers */
30 #define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */
31 #define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */
32 #define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */
33 #define B43_PHY_BBANDCFG_RXANT_SHIFT 7
34 #define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */
35 #define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */
36 #define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */
37 #define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */
38 #define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */
39 #define B43_PHY_CRS0 B43_PHY_OFDM(0x29)
40 #define B43_PHY_CRS0_EN 0x4000
41 #define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30)
42 #define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */
43 #define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */
44 #define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */
45 #define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */
46 #define B43_PHY_LMS B43_PHY_OFDM(0x55)
47 #define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */
48 #define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */
49 #define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */
50 #define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */
51 #define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */
52 #define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */
53 #define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */
54 #define B43_PHY_OTABLENR_SHIFT 10
55 #define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */
56 #define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */
57 #define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */
58 #define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */
59 #define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B)
60 #define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */
61 #define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */
62 #define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */
63 #define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */
64 #define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */
65 #define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */
66 #define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0)
67 #define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1)
68 #define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2)
69 #define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3)
70 #define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4)
71 #define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */
72 #define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */
73 #define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */
74 #define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9)
75 #define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA)
76 #define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB)
77 #define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */
78 #define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */
79 #define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */
80 #define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */
81 #define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */
82 #define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */
83 #define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */
85 /* CCK (B) PHY Registers */
86 #define B43_PHY_VERSION_CCK B43_PHY_CCK(0x00) /* Versioning register for B-PHY */
87 #define B43_PHY_CCKBBANDCFG B43_PHY_CCK(0x01) /* Contains antenna 0/1 control bit */
88 #define B43_PHY_PGACTL B43_PHY_CCK(0x15) /* PGA control */
89 #define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */
90 #define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */
91 #define B43_PHY_PGACTL_UNKNOWN 0xEFA0
92 #define B43_PHY_FBCTL1 B43_PHY_CCK(0x18) /* Frequency bandwidth control 1 */
93 #define B43_PHY_ITSSI B43_PHY_CCK(0x29) /* Idle TSSI */
94 #define B43_PHY_LO_LEAKAGE B43_PHY_CCK(0x2D) /* Measured LO leakage */
95 #define B43_PHY_ENERGY B43_PHY_CCK(0x33) /* Energy */
96 #define B43_PHY_SYNCCTL B43_PHY_CCK(0x35)
97 #define B43_PHY_FBCTL2 B43_PHY_CCK(0x38) /* Frequency bandwidth control 2 */
98 #define B43_PHY_DACCTL B43_PHY_CCK(0x60) /* DAC control */
99 #define B43_PHY_RCCALOVER B43_PHY_CCK(0x78) /* RC calibration override */
101 /* Extended G-PHY Registers */
102 #define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */
103 #define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */
104 #define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */
105 #define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */
106 #define B43_PHY_GTABNR_SHIFT 10
107 #define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */
108 #define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */
109 #define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */
110 #define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */
111 #define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */
112 #define B43_PHY_RFOVERVAL_EXTLNA 0x8000
113 #define B43_PHY_RFOVERVAL_LNA 0x7000
114 #define B43_PHY_RFOVERVAL_LNA_SHIFT 12
115 #define B43_PHY_RFOVERVAL_PGA 0x0F00
116 #define B43_PHY_RFOVERVAL_PGA_SHIFT 8
117 #define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */
118 #define B43_PHY_RFOVERVAL_TRSWRX 0x00E0
119 #define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */
120 #define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */
121 #define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */
122 #define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */
123 #define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */
125 /*** OFDM table numbers ***/
126 #define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset))
127 #define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0)
128 #define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0)
129 #define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename
130 #define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4)
131 #define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0)
132 #define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3)
133 #define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0)
134 #define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0)
135 #define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0)
136 #define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0)
137 #define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0)
138 #define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0)
139 #define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0)
140 #define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0)
141 #define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7)
142 #define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12)
143 #define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13)
144 #define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename
145 #define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename
146 #define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12)
147 #define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0)
148 #define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename
149 #define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0)
150 #define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove!
151 #define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0)
152 #define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0)
153 #define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4)
154 #define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0)
155 #define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0)
156 #define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0)
157 #define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0)
159 u16
b43_ofdmtab_read16(struct b43_wldev
*dev
, u16 table
, u16 offset
);
160 void b43_ofdmtab_write16(struct b43_wldev
*dev
, u16 table
,
161 u16 offset
, u16 value
);
162 u32
b43_ofdmtab_read32(struct b43_wldev
*dev
, u16 table
, u16 offset
);
163 void b43_ofdmtab_write32(struct b43_wldev
*dev
, u16 table
,
164 u16 offset
, u32 value
);
166 /*** G-PHY table numbers */
167 #define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset))
168 #define B43_GTAB_NRSSI B43_GTAB(0x00, 0)
169 #define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120)
170 #define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298)
172 u16
b43_gtab_read(struct b43_wldev
*dev
, u16 table
, u16 offset
); //TODO implement
173 void b43_gtab_write(struct b43_wldev
*dev
, u16 table
, u16 offset
, u16 value
); //TODO implement
175 #define B43_DEFAULT_CHANNEL_A 36
176 #define B43_DEFAULT_CHANNEL_BG 6
179 B43_ANTENNA0
, /* Antenna 0 */
180 B43_ANTENNA1
, /* Antenna 0 */
181 B43_ANTENNA_AUTO1
, /* Automatic, starting with antenna 1 */
182 B43_ANTENNA_AUTO0
, /* Automatic, starting with antenna 0 */
186 B43_ANTENNA_AUTO
= B43_ANTENNA_AUTO0
,
187 B43_ANTENNA_DEFAULT
= B43_ANTENNA_AUTO
,
192 B43_INTERFMODE_NONWLAN
,
193 B43_INTERFMODE_MANUALWLAN
,
194 B43_INTERFMODE_AUTOWLAN
,
197 /* Masks for the different PHY versioning registers. */
198 #define B43_PHYVER_ANALOG 0xF000
199 #define B43_PHYVER_ANALOG_SHIFT 12
200 #define B43_PHYVER_TYPE 0x0F00
201 #define B43_PHYVER_TYPE_SHIFT 8
202 #define B43_PHYVER_VERSION 0x00FF
204 void b43_phy_lock(struct b43_wldev
*dev
);
205 void b43_phy_unlock(struct b43_wldev
*dev
);
208 /* Read a value from a PHY register */
209 u16
b43_phy_read(struct b43_wldev
*dev
, u16 offset
);
210 /* Write a value to a PHY register */
211 void b43_phy_write(struct b43_wldev
*dev
, u16 offset
, u16 val
);
212 /* Mask a PHY register with a mask */
213 void b43_phy_mask(struct b43_wldev
*dev
, u16 offset
, u16 mask
);
214 /* OR a PHY register with a bitmap */
215 void b43_phy_set(struct b43_wldev
*dev
, u16 offset
, u16 set
);
216 /* Mask and OR a PHY register with a mask and bitmap */
217 void b43_phy_maskset(struct b43_wldev
*dev
, u16 offset
, u16 mask
, u16 set
);
220 int b43_phy_init_tssi2dbm_table(struct b43_wldev
*dev
);
222 void b43_phy_early_init(struct b43_wldev
*dev
);
223 int b43_phy_init(struct b43_wldev
*dev
);
225 void b43_set_rx_antenna(struct b43_wldev
*dev
, int antenna
);
227 void b43_phy_xmitpower(struct b43_wldev
*dev
);
228 void b43_gphy_dc_lt_init(struct b43_wldev
*dev
);
230 /* Returns the boolean whether the board has HardwarePowerControl */
231 bool b43_has_hardware_pctl(struct b43_phy
*phy
);
232 /* Returns the boolean whether "TX Magnification" is enabled. */
233 #define has_tx_magnification(phy) \
234 (((phy)->rev >= 2) && \
235 ((phy)->radio_ver == 0x2050) && \
236 ((phy)->radio_rev == 8))
237 /* Card uses the loopback gain stuff */
238 #define has_loopback_gain(phy) \
239 (((phy)->rev > 1) || ((phy)->gmode))
241 /* Radio Attenuation (RF Attenuation) */
243 u8 att
; /* Attenuation value */
244 bool with_padmix
; /* Flag, PAD Mixer enabled. */
246 struct b43_rfatt_list
{
247 /* Attenuation values list */
248 const struct b43_rfatt
*list
;
250 /* Minimum/Maximum attenuation values */
255 /* Baseband Attenuation */
257 u8 att
; /* Attenuation value */
259 struct b43_bbatt_list
{
260 /* Attenuation values list */
261 const struct b43_bbatt
*list
;
263 /* Minimum/Maximum attenuation values */
268 /* tx_control bits. */
269 #define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */
270 #define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */
271 #define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */
273 /* Write BasebandAttenuation value to the device. */
274 void b43_phy_set_baseband_attenuation(struct b43_wldev
*dev
,
275 u16 baseband_attenuation
);
277 extern const u8 b43_radio_channel_codes_bg
[];
279 void b43_radio_lock(struct b43_wldev
*dev
);
280 void b43_radio_unlock(struct b43_wldev
*dev
);
283 /* Read a value from a 16bit radio register */
284 u16
b43_radio_read16(struct b43_wldev
*dev
, u16 offset
);
285 /* Write a value to a 16bit radio register */
286 void b43_radio_write16(struct b43_wldev
*dev
, u16 offset
, u16 val
);
287 /* Mask a 16bit radio register with a mask */
288 void b43_radio_mask(struct b43_wldev
*dev
, u16 offset
, u16 mask
);
289 /* OR a 16bit radio register with a bitmap */
290 void b43_radio_set(struct b43_wldev
*dev
, u16 offset
, u16 set
);
291 /* Mask and OR a PHY register with a mask and bitmap */
292 void b43_radio_maskset(struct b43_wldev
*dev
, u16 offset
, u16 mask
, u16 set
);
295 u16
b43_radio_init2050(struct b43_wldev
*dev
);
296 void b43_radio_init2060(struct b43_wldev
*dev
);
298 void b43_radio_turn_on(struct b43_wldev
*dev
);
299 void b43_radio_turn_off(struct b43_wldev
*dev
, bool force
);
301 int b43_radio_selectchannel(struct b43_wldev
*dev
, u8 channel
,
302 int synthetic_pu_workaround
);
304 u8
b43_radio_aci_detect(struct b43_wldev
*dev
, u8 channel
);
305 u8
b43_radio_aci_scan(struct b43_wldev
*dev
);
307 int b43_radio_set_interference_mitigation(struct b43_wldev
*dev
, int mode
);
309 void b43_calc_nrssi_slope(struct b43_wldev
*dev
);
310 void b43_calc_nrssi_threshold(struct b43_wldev
*dev
);
311 s16
b43_nrssi_hw_read(struct b43_wldev
*dev
, u16 offset
);
312 void b43_nrssi_hw_write(struct b43_wldev
*dev
, u16 offset
, s16 val
);
313 void b43_nrssi_hw_update(struct b43_wldev
*dev
, u16 val
);
314 void b43_nrssi_mem_update(struct b43_wldev
*dev
);
316 void b43_radio_set_tx_iq(struct b43_wldev
*dev
);
317 u16
b43_radio_calibrationvalue(struct b43_wldev
*dev
);
319 void b43_put_attenuation_into_ranges(struct b43_wldev
*dev
,
320 int *_bbatt
, int *_rfatt
);
322 void b43_set_txpower_g(struct b43_wldev
*dev
,
323 const struct b43_bbatt
*bbatt
,
324 const struct b43_rfatt
*rfatt
, u8 tx_control
);
326 #endif /* B43_PHY_H_ */