projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
[kernel] sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423)
[openwrt.git] / target / linux / lantiq / patches-2.6.32 / 0003-MIPS-Lantiq-Add-PCI-controller-support.patch
1 From 08127ed36bad367903591bbf0f244179683ccb28 Mon Sep 17 00:00:00 2001
2 From: John Crispin <blogic@openwrt.org>
3 Date: Wed, 30 Mar 2011 09:27:49 +0200
4 Subject: [PATCH 03/13] MIPS: Lantiq: Add PCI controller support.
5
6 The Lantiq family of SoCs have a EBU (External Bus Unit). This patch adds
7 the driver that allows us to use the EBU as a PCI controller. In order for
8 PCI to work the EBU is set to endianess swap all the data. In addition we
9 need to make use of SWAP_IO_SPACE for device->host DMA to work.
10
11 The clock of the PCI works in several modes (internal/external). If this
12 is not configured correctly the SoC will hang.
13
14 Signed-off-by: John Crispin <blogic@openwrt.org>
15 Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
16 Cc: linux-mips@linux-mips.org
17 Patchwork: https://patchwork.linux-mips.org/patch/2250/
18 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
19 ---
20 .../mips/include/asm/mach-lantiq/lantiq_platform.h | 46 +++
21 arch/mips/pci/Makefile | 1 +
22 arch/mips/pci/ops-lantiq.c | 116 ++++++++
23 arch/mips/pci/pci-lantiq.c | 297 ++++++++++++++++++++
24 arch/mips/pci/pci-lantiq.h | 18 ++
25 5 files changed, 478 insertions(+), 0 deletions(-)
26 create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_platform.h
27 create mode 100644 arch/mips/pci/ops-lantiq.c
28 create mode 100644 arch/mips/pci/pci-lantiq.c
29 create mode 100644 arch/mips/pci/pci-lantiq.h
30
31 diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
32 new file mode 100644
33 index 0000000..1f1dba6
34 --- /dev/null
35 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
36 @@ -0,0 +1,46 @@
37 +/*
38 + * This program is free software; you can redistribute it and/or modify it
39 + * under the terms of the GNU General Public License version 2 as published
40 + * by the Free Software Foundation.
41 + *
42 + * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
43 + */
44 +
45 +#ifndef _LANTIQ_PLATFORM_H__
46 +#define _LANTIQ_PLATFORM_H__
47 +
48 +#include <linux/mtd/partitions.h>
49 +
50 +/* struct used to pass info to the pci core */
51 +enum {
52 + PCI_CLOCK_INT = 0,
53 + PCI_CLOCK_EXT
54 +};
55 +
56 +#define PCI_EXIN0 0x0001
57 +#define PCI_EXIN1 0x0002
58 +#define PCI_EXIN2 0x0004
59 +#define PCI_EXIN3 0x0008
60 +#define PCI_EXIN4 0x0010
61 +#define PCI_EXIN5 0x0020
62 +#define PCI_EXIN_MAX 6
63 +
64 +#define PCI_GNT1 0x0040
65 +#define PCI_GNT2 0x0080
66 +#define PCI_GNT3 0x0100
67 +#define PCI_GNT4 0x0200
68 +
69 +#define PCI_REQ1 0x0400
70 +#define PCI_REQ2 0x0800
71 +#define PCI_REQ3 0x1000
72 +#define PCI_REQ4 0x2000
73 +#define PCI_REQ_SHIFT 10
74 +#define PCI_REQ_MASK 0xf
75 +
76 +struct ltq_pci_data {
77 + int clock;
78 + int gpio;
79 + int irq[16];
80 +};
81 +
82 +#endif
83 diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
84 index f0d5329..4df8799 100644
85 --- a/arch/mips/pci/Makefile
86 +++ b/arch/mips/pci/Makefile
87 @@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
88 obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
89 obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
90 obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
91 +obj-$(CONFIG_SOC_XWAY) += pci-lantiq.o ops-lantiq.o
92 obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
93 obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
94 obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
95 diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
96 new file mode 100644
97 index 0000000..1f2afb5
98 --- /dev/null
99 +++ b/arch/mips/pci/ops-lantiq.c
100 @@ -0,0 +1,116 @@
101 +/*
102 + * This program is free software; you can redistribute it and/or modify it
103 + * under the terms of the GNU General Public License version 2 as published
104 + * by the Free Software Foundation.
105 + *
106 + * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
107 + */
108 +
109 +#include <linux/types.h>
110 +#include <linux/pci.h>
111 +#include <linux/kernel.h>
112 +#include <linux/init.h>
113 +#include <linux/delay.h>
114 +#include <linux/mm.h>
115 +#include <asm/addrspace.h>
116 +#include <linux/vmalloc.h>
117 +
118 +#include <lantiq_soc.h>
119 +
120 +#include "pci-lantiq.h"
121 +
122 +#define LTQ_PCI_CFG_BUSNUM_SHF 16
123 +#define LTQ_PCI_CFG_DEVNUM_SHF 11
124 +#define LTQ_PCI_CFG_FUNNUM_SHF 8
125 +
126 +#define PCI_ACCESS_READ 0
127 +#define PCI_ACCESS_WRITE 1
128 +
129 +static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus,
130 + unsigned int devfn, unsigned int where, u32 *data)
131 +{
132 + unsigned long cfg_base;
133 + unsigned long flags;
134 + u32 temp;
135 +
136 + /* we support slot from 0 to 15 dev_fn & 0x68 (AD29) is the
137 + SoC itself */
138 + if ((bus->number != 0) || ((devfn & 0xf8) > 0x78)
139 + || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68))
140 + return 1;
141 +
142 + spin_lock_irqsave(&ebu_lock, flags);
143 +
144 + cfg_base = (unsigned long) ltq_pci_mapped_cfg;
145 + cfg_base |= (bus->number << LTQ_PCI_CFG_BUSNUM_SHF) | (devfn <<
146 + LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
147 +
148 + /* Perform access */
149 + if (access_type == PCI_ACCESS_WRITE) {
150 + ltq_w32(swab32(*data), ((u32 *)cfg_base));
151 + } else {
152 + *data = ltq_r32(((u32 *)(cfg_base)));
153 + *data = swab32(*data);
154 + }
155 + wmb();
156 +
157 + /* clean possible Master abort */
158 + cfg_base = (unsigned long) ltq_pci_mapped_cfg;
159 + cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
160 + temp = ltq_r32(((u32 *)(cfg_base)));
161 + temp = swab32(temp);
162 + cfg_base = (unsigned long) ltq_pci_mapped_cfg;
163 + cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
164 + ltq_w32(temp, ((u32 *)cfg_base));
165 +
166 + spin_unlock_irqrestore(&ebu_lock, flags);
167 +
168 + if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
169 + return 1;
170 +
171 + return 0;
172 +}
173 +
174 +int ltq_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
175 + int where, int size, u32 *val)
176 +{
177 + u32 data = 0;
178 +
179 + if (ltq_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
180 + return PCIBIOS_DEVICE_NOT_FOUND;
181 +
182 + if (size == 1)
183 + *val = (data >> ((where & 3) << 3)) & 0xff;
184 + else if (size == 2)
185 + *val = (data >> ((where & 3) << 3)) & 0xffff;
186 + else
187 + *val = data;
188 +
189 + return PCIBIOS_SUCCESSFUL;
190 +}
191 +
192 +int ltq_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
193 + int where, int size, u32 val)
194 +{
195 + u32 data = 0;
196 +
197 + if (size == 4) {
198 + data = val;
199 + } else {
200 + if (ltq_pci_config_access(PCI_ACCESS_READ, bus,
201 + devfn, where, &data))
202 + return PCIBIOS_DEVICE_NOT_FOUND;
203 +
204 + if (size == 1)
205 + data = (data & ~(0xff << ((where & 3) << 3))) |
206 + (val << ((where & 3) << 3));
207 + else if (size == 2)
208 + data = (data & ~(0xffff << ((where & 3) << 3))) |
209 + (val << ((where & 3) << 3));
210 + }
211 +
212 + if (ltq_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
213 + return PCIBIOS_DEVICE_NOT_FOUND;
214 +
215 + return PCIBIOS_SUCCESSFUL;
216 +}
217 diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
218 new file mode 100644
219 index 0000000..603d749
220 --- /dev/null
221 +++ b/arch/mips/pci/pci-lantiq.c
222 @@ -0,0 +1,297 @@
223 +/*
224 + * This program is free software; you can redistribute it and/or modify it
225 + * under the terms of the GNU General Public License version 2 as published
226 + * by the Free Software Foundation.
227 + *
228 + * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
229 + */
230 +
231 +#include <linux/types.h>
232 +#include <linux/pci.h>
233 +#include <linux/kernel.h>
234 +#include <linux/init.h>
235 +#include <linux/delay.h>
236 +#include <linux/mm.h>
237 +#include <linux/vmalloc.h>
238 +#include <linux/platform_device.h>
239 +
240 +#include <asm/pci.h>
241 +#include <asm/gpio.h>
242 +#include <asm/addrspace.h>
243 +
244 +#include <lantiq_soc.h>
245 +#include <lantiq_irq.h>
246 +#include <lantiq_platform.h>
247 +
248 +#include "pci-lantiq.h"
249 +
250 +#define LTQ_PCI_CFG_BASE 0x17000000
251 +#define LTQ_PCI_CFG_SIZE 0x00008000
252 +#define LTQ_PCI_MEM_BASE 0x18000000
253 +#define LTQ_PCI_MEM_SIZE 0x02000000
254 +#define LTQ_PCI_IO_BASE 0x1AE00000
255 +#define LTQ_PCI_IO_SIZE 0x00200000
256 +
257 +#define PCI_CR_FCI_ADDR_MAP0 0x00C0
258 +#define PCI_CR_FCI_ADDR_MAP1 0x00C4
259 +#define PCI_CR_FCI_ADDR_MAP2 0x00C8
260 +#define PCI_CR_FCI_ADDR_MAP3 0x00CC
261 +#define PCI_CR_FCI_ADDR_MAP4 0x00D0
262 +#define PCI_CR_FCI_ADDR_MAP5 0x00D4
263 +#define PCI_CR_FCI_ADDR_MAP6 0x00D8
264 +#define PCI_CR_FCI_ADDR_MAP7 0x00DC
265 +#define PCI_CR_CLK_CTRL 0x0000
266 +#define PCI_CR_PCI_MOD 0x0030
267 +#define PCI_CR_PC_ARB 0x0080
268 +#define PCI_CR_FCI_ADDR_MAP11hg 0x00E4
269 +#define PCI_CR_BAR11MASK 0x0044
270 +#define PCI_CR_BAR12MASK 0x0048
271 +#define PCI_CR_BAR13MASK 0x004C
272 +#define PCI_CS_BASE_ADDR1 0x0010
273 +#define PCI_CR_PCI_ADDR_MAP11 0x0064
274 +#define PCI_CR_FCI_BURST_LENGTH 0x00E8
275 +#define PCI_CR_PCI_EOI 0x002C
276 +#define PCI_CS_STS_CMD 0x0004
277 +
278 +#define PCI_MASTER0_REQ_MASK_2BITS 8
279 +#define PCI_MASTER1_REQ_MASK_2BITS 10
280 +#define PCI_MASTER2_REQ_MASK_2BITS 12
281 +#define INTERNAL_ARB_ENABLE_BIT 0
282 +
283 +#define LTQ_CGU_IFCCR 0x0018
284 +#define LTQ_CGU_PCICR 0x0034
285 +
286 +#define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
287 +#define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
288 +
289 +#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
290 +#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
291 +
292 +struct ltq_pci_gpio_map {
293 + int pin;
294 + int alt0;
295 + int alt1;
296 + int dir;
297 + char *name;
298 +};
299 +
300 +/* the pci core can make use of the following gpios */
301 +static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = {
302 + { 0, 1, 0, 0, "pci-exin0" },
303 + { 1, 1, 0, 0, "pci-exin1" },
304 + { 2, 1, 0, 0, "pci-exin2" },
305 + { 39, 1, 0, 0, "pci-exin3" },
306 + { 10, 1, 0, 0, "pci-exin4" },
307 + { 9, 1, 0, 0, "pci-exin5" },
308 + { 30, 1, 0, 1, "pci-gnt1" },
309 + { 23, 1, 0, 1, "pci-gnt2" },
310 + { 19, 1, 0, 1, "pci-gnt3" },
311 + { 38, 1, 0, 1, "pci-gnt4" },
312 + { 29, 1, 0, 0, "pci-req1" },
313 + { 31, 1, 0, 0, "pci-req2" },
314 + { 3, 1, 0, 0, "pci-req3" },
315 + { 37, 1, 0, 0, "pci-req4" },
316 +};
317 +
318 +__iomem void *ltq_pci_mapped_cfg;
319 +static __iomem void *ltq_pci_membase;
320 +
321 +int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
322 +
323 +/* Since the PCI REQ pins can be reused for other functionality, make it
324 + possible to exclude those from interpretation by the PCI controller */
325 +static int ltq_pci_req_mask = 0xf;
326 +
327 +static int *ltq_pci_irq_map;
328 +
329 +struct pci_ops ltq_pci_ops = {
330 + .read = ltq_pci_read_config_dword,
331 + .write = ltq_pci_write_config_dword
332 +};
333 +
334 +static struct resource pci_io_resource = {
335 + .name = "pci io space",
336 + .start = LTQ_PCI_IO_BASE,
337 + .end = LTQ_PCI_IO_BASE + LTQ_PCI_IO_SIZE - 1,
338 + .flags = IORESOURCE_IO
339 +};
340 +
341 +static struct resource pci_mem_resource = {
342 + .name = "pci memory space",
343 + .start = LTQ_PCI_MEM_BASE,
344 + .end = LTQ_PCI_MEM_BASE + LTQ_PCI_MEM_SIZE - 1,
345 + .flags = IORESOURCE_MEM
346 +};
347 +
348 +static struct pci_controller ltq_pci_controller = {
349 + .pci_ops = &ltq_pci_ops,
350 + .mem_resource = &pci_mem_resource,
351 + .mem_offset = 0x00000000UL,
352 + .io_resource = &pci_io_resource,
353 + .io_offset = 0x00000000UL,
354 +};
355 +
356 +int pcibios_plat_dev_init(struct pci_dev *dev)
357 +{
358 + if (ltqpci_plat_dev_init)
359 + return ltqpci_plat_dev_init(dev);
360 +
361 + return 0;
362 +}
363 +
364 +static u32 ltq_calc_bar11mask(void)
365 +{
366 + u32 mem, bar11mask;
367 +
368 + /* BAR11MASK value depends on available memory on system. */
369 + mem = num_physpages * PAGE_SIZE;
370 + bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
371 +
372 + return bar11mask;
373 +}
374 +
375 +static void ltq_pci_setup_gpio(int gpio)
376 +{
377 + int i;
378 + for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) {
379 + if (gpio & (1 << i)) {
380 + ltq_gpio_request(ltq_pci_gpio_map[i].pin,
381 + ltq_pci_gpio_map[i].alt0,
382 + ltq_pci_gpio_map[i].alt1,
383 + ltq_pci_gpio_map[i].dir,
384 + ltq_pci_gpio_map[i].name);
385 + }
386 + }
387 + ltq_gpio_request(21, 0, 0, 1, "pci-reset");
388 + ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
389 +}
390 +
391 +static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
392 +{
393 + u32 temp_buffer;
394 +
395 + /* set clock to 33Mhz */
396 + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR);
397 + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR);
398 +
399 + /* external or internal clock ? */
400 + if (conf->clock) {
401 + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~(1 << 16),
402 + LTQ_CGU_IFCCR);
403 + ltq_cgu_w32((1 << 30), LTQ_CGU_PCICR);
404 + } else {
405 + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | (1 << 16),
406 + LTQ_CGU_IFCCR);
407 + ltq_cgu_w32((1 << 31) | (1 << 30), LTQ_CGU_PCICR);
408 + }
409 +
410 + /* setup pci clock and gpis used by pci */
411 + ltq_pci_setup_gpio(conf->gpio);
412 +
413 + /* enable auto-switching between PCI and EBU */
414 + ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
415 +
416 + /* busy, i.e. configuration is not done, PCI access has to be retried */
417 + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
418 + wmb();
419 + /* BUS Master/IO/MEM access */
420 + ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
421 +
422 + /* enable external 2 PCI masters */
423 + temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
424 + temp_buffer &= (~(ltq_pci_req_mask << 16));
425 + /* enable internal arbiter */
426 + temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
427 + /* enable internal PCI master reqest */
428 + temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
429 +
430 + /* enable EBU request */
431 + temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
432 +
433 + /* enable all external masters request */
434 + temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
435 + ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
436 + wmb();
437 +
438 + /* setup BAR memory regions */
439 + ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
440 + ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
441 + ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
442 + ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
443 + ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
444 + ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
445 + ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
446 + ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
447 + ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
448 + ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
449 + ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
450 + ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
451 + /* both TX and RX endian swap are enabled */
452 + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
453 + wmb();
454 + ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
455 + PCI_CR_BAR12MASK);
456 + ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
457 + PCI_CR_BAR13MASK);
458 + /*use 8 dw burst length */
459 + ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
460 + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
461 + wmb();
462 +
463 + /* setup irq line */
464 + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
465 + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
466 +
467 + /* toggle reset pin */
468 + __gpio_set_value(21, 0);
469 + wmb();
470 + mdelay(1);
471 + __gpio_set_value(21, 1);
472 + return 0;
473 +}
474 +
475 +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
476 +{
477 + if (ltq_pci_irq_map[slot])
478 + return ltq_pci_irq_map[slot];
479 + printk(KERN_ERR "ltq_pci: trying to map irq for unknown slot %d\n",
480 + slot);
481 +
482 + return 0;
483 +}
484 +
485 +static int __devinit ltq_pci_probe(struct platform_device *pdev)
486 +{
487 + struct ltq_pci_data *ltq_pci_data =
488 + (struct ltq_pci_data *) pdev->dev.platform_data;
489 + pci_probe_only = 0;
490 + ltq_pci_irq_map = ltq_pci_data->irq;
491 + ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE);
492 + ltq_pci_mapped_cfg =
493 + ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
494 + ltq_pci_controller.io_map_base =
495 + (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
496 + ltq_pci_startup(ltq_pci_data);
497 + register_pci_controller(&ltq_pci_controller);
498 +
499 + return 0;
500 +}
501 +
502 +static struct platform_driver
503 +ltq_pci_driver = {
504 + .probe = ltq_pci_probe,
505 + .driver = {
506 + .name = "ltq_pci",
507 + .owner = THIS_MODULE,
508 + },
509 +};
510 +
511 +int __init pcibios_init(void)
512 +{
513 + int ret = platform_driver_register(&ltq_pci_driver);
514 + if (ret)
515 + printk(KERN_INFO "ltq_pci: Error registering platfom driver!");
516 + return ret;
517 +}
518 +
519 +arch_initcall(pcibios_init);
520 diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h
521 new file mode 100644
522 index 0000000..66bf6cd
523 --- /dev/null
524 +++ b/arch/mips/pci/pci-lantiq.h
525 @@ -0,0 +1,18 @@
526 +/*
527 + * This program is free software; you can redistribute it and/or modify it
528 + * under the terms of the GNU General Public License version 2 as published
529 + * by the Free Software Foundation.
530 + *
531 + * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
532 + */
533 +
534 +#ifndef _LTQ_PCI_H__
535 +#define _LTQ_PCI_H__
536 +
537 +extern __iomem void *ltq_pci_mapped_cfg;
538 +extern int ltq_pci_read_config_dword(struct pci_bus *bus,
539 + unsigned int devfn, int where, int size, u32 *val);
540 +extern int ltq_pci_write_config_dword(struct pci_bus *bus,
541 + unsigned int devfn, int where, int size, u32 val);
542 +
543 +#endif
544 --
545 1.7.2.3
546
Personal OpenWRT clone
This page took 0.093592 seconds and 5 git commands to generate.