projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
add nocatsplash depend on glib
[openwrt.git] / obsolete-buildroot / sources / openwrt / kernel / patches / 150-mppe-mppc-0.98.patch
1 diff -ruN linux-2.4.21.orig/drivers/net/Config.in linux-2.4.21/drivers/net/Config.in
2 --- linux-2.4.21.orig/drivers/net/Config.in 2003-06-13 16:51:34.000000000 +0200
3 +++ linux-2.4.21/drivers/net/Config.in 2003-07-08 07:27:10.000000000 +0200
4 @@ -301,6 +301,7 @@
5 dep_tristate ' PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
6 dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
7 dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP $CONFIG_PPP
8 + dep_tristate ' Microsoft PPP compression/encryption (MPPC/MPPE)' CONFIG_PPP_MPPE $CONFIG_PPP
9 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
10 dep_tristate ' PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
11 fi
12 diff -ruN linux-2.4.21.orig/drivers/net/Makefile linux-2.4.21/drivers/net/Makefile
13 --- linux-2.4.21.orig/drivers/net/Makefile 2003-06-13 16:51:34.000000000 +0200
14 +++ linux-2.4.21/drivers/net/Makefile 2003-07-14 23:53:15.000000000 +0200
15 @@ -18,8 +18,9 @@
16 export-objs := 8390.o arlan.o aironet4500_core.o aironet4500_card.o \
17 ppp_async.o ppp_generic.o slhc.o pppox.o auto_irq.o \
18 net_init.o mii.o
19 -list-multi := rcpci.o
20 +list-multi := rcpci.o ppp_mppe_mppc.o
21 rcpci-objs := rcpci45.o rclanmtl.o
22 +ppp_mppe_c-objs := ppp_mppe_mppc_comp.o ppp_mppe_crypto.o
23
24 ifeq ($(CONFIG_TULIP),y)
25 obj-y += tulip/tulip.o
26 @@ -149,6 +150,15 @@
27 obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
28 obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
29 obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
30 +
31 +ifeq ($(CONFIG_PPP_MPPE),y)
32 + obj-y += $(ppp_mppe_c-objs)
33 +else
34 + ifeq ($(CONFIG_PPP_MPPE),m)
35 + obj-m += ppp_mppe_mppc.o
36 + endif
37 +endif
38 +
39 obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
40
41 obj-$(CONFIG_SLIP) += slip.o
42 @@ -258,3 +268,5 @@
43 rcpci.o: $(rcpci-objs)
44 $(LD) -r -o $@ $(rcpci-objs)
45
46 +ppp_mppe_mppc.o: $(ppp_mppe_c-objs)
47 + $(LD) -r -o $@ $(ppp_mppe_c-objs)
48 diff -ruN linux-2.4.21.orig/drivers/net/ppp_generic.c linux-2.4.21/drivers/net/ppp_generic.c
49 --- linux-2.4.21.orig/drivers/net/ppp_generic.c 2003-06-13 16:51:35.000000000 +0200
50 +++ linux-2.4.21/drivers/net/ppp_generic.c 2003-07-12 04:39:03.000000000 +0200
51 @@ -19,7 +19,7 @@
52 * PPP driver, written by Michael Callahan and Al Longyear, and
53 * subsequently hacked by Paul Mackerras.
54 *
55 - * ==FILEVERSION 20020217==
56 + * ==FILEVERSION 20030706==
57 */
58
59 #include <linux/config.h>
60 @@ -102,6 +102,7 @@
61 spinlock_t rlock; /* lock for receive side 58 */
62 spinlock_t wlock; /* lock for transmit side 5c */
63 int mru; /* max receive unit 60 */
64 + int mru_alloc; /* MAX(1500,MRU) for dev_alloc_skb() */
65 unsigned int flags; /* control bits 64 */
66 unsigned int xstate; /* transmit state bits 68 */
67 unsigned int rstate; /* receive state bits 6c */
68 @@ -129,6 +130,7 @@
69 struct sock_fprog pass_filter; /* filter for packets to pass */
70 struct sock_fprog active_filter;/* filter for pkts to reset idle */
71 #endif /* CONFIG_PPP_FILTER */
72 + int xpad; /* ECP or CCP (MPPE) transmit padding */
73 };
74
75 /*
76 @@ -552,7 +554,9 @@
77 case PPPIOCSMRU:
78 if (get_user(val, (int *) arg))
79 break;
80 - ppp->mru = val;
81 + ppp->mru_alloc = ppp->mru = val;
82 + if (ppp->mru_alloc < PPP_MRU)
83 + ppp->mru_alloc = PPP_MRU; /* increase for broken peers */
84 err = 0;
85 break;
86
87 @@ -1023,14 +1027,35 @@
88 case PPP_CCP:
89 /* peek at outbound CCP frames */
90 ppp_ccp_peek(ppp, skb, 0);
91 + /*
92 + * When LZS or MPPE/MPPC is negotiated we don't send
93 + * CCP_RESETACK after receiving CCP_RESETREQ; in fact pppd
94 + * sends such a packet but we silently discard it here
95 + */
96 + if (CCP_CODE(skb->data+2) == CCP_RESETACK
97 + && (ppp->xcomp->compress_proto == CI_MPPE
98 + || ppp->xcomp->compress_proto == CI_LZS)) {
99 + --ppp->stats.tx_packets;
100 + ppp->stats.tx_bytes -= skb->len - 2;
101 + kfree_skb(skb);
102 + return;
103 + }
104 break;
105 }
106
107 /* try to do packet compression */
108 if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state != 0
109 && proto != PPP_LCP && proto != PPP_CCP) {
110 - new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len,
111 - GFP_ATOMIC);
112 + int comp_ovhd = 0;
113 + /* because of possible data expansion when MPPC or LZS
114 + is used, allocate compressor's buffer about 12.5% bigger
115 + than MTU */
116 + if (ppp->xcomp->compress_proto == CI_MPPE)
117 + comp_ovhd = (((ppp->dev->mtu * 9) / 8) + 1);
118 + else if (ppp->xcomp->compress_proto == CI_LZS)
119 + comp_ovhd = (((ppp->dev->mtu * 9) / 8) + 1) + LZS_OVHD;
120 + new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len
121 + + ppp->xpad + comp_ovhd, GFP_ATOMIC);
122 if (new_skb == 0) {
123 printk(KERN_ERR "PPP: no memory (comp pkt)\n");
124 goto drop;
125 @@ -1042,15 +1067,28 @@
126 /* compressor still expects A/C bytes in hdr */
127 len = ppp->xcomp->compress(ppp->xc_state, skb->data - 2,
128 new_skb->data, skb->len + 2,
129 - ppp->dev->mtu + PPP_HDRLEN);
130 + ppp->dev->mtu + ppp->xpad
131 + + PPP_HDRLEN);
132 if (len > 0 && (ppp->flags & SC_CCP_UP)) {
133 kfree_skb(skb);
134 skb = new_skb;
135 skb_put(skb, len);
136 skb_pull(skb, 2); /* pull off A/C bytes */
137 - } else {
138 + } else if (len == 0) {
139 /* didn't compress, or CCP not up yet */
140 kfree_skb(new_skb);
141 + } else {
142 + /*
143 + * (len < 0)
144 + * MPPE requires that we do not send unencrypted
145 + * frames. The compressor will return -1 if we
146 + * should drop the frame. We cannot simply test
147 + * the compress_proto because MPPE and MPPC share
148 + * the same number.
149 + */
150 + printk(KERN_ERR "ppp: compressor dropped pkt\n");
151 + kfree_skb(new_skb);
152 + goto drop;
153 }
154 }
155
156 @@ -1538,14 +1576,15 @@
157 int len;
158
159 if (proto == PPP_COMP) {
160 - ns = dev_alloc_skb(ppp->mru + PPP_HDRLEN);
161 + ns = dev_alloc_skb(ppp->mru_alloc + PPP_HDRLEN);
162 if (ns == 0) {
163 printk(KERN_ERR "ppp_decompress_frame: no memory\n");
164 goto err;
165 }
166 /* the decompressor still expects the A/C bytes in the hdr */
167 len = ppp->rcomp->decompress(ppp->rc_state, skb->data - 2,
168 - skb->len + 2, ns->data, ppp->mru + PPP_HDRLEN);
169 + skb->len + 2, ns->data,
170 + ppp->mru_alloc + PPP_HDRLEN);
171 if (len < 0) {
172 /* Pass the compressed frame to pppd as an
173 error indication. */
174 @@ -1571,7 +1610,12 @@
175 return skb;
176
177 err:
178 - ppp->rstate |= SC_DC_ERROR;
179 + if (ppp->rcomp->compress_proto != CI_MPPE
180 + && ppp->rcomp->compress_proto != CI_LZS) {
181 + /* If decompression protocol isn't MPPE/MPPC or LZS, we set
182 + SC_DC_ERROR flag and wait for CCP_RESETACK */
183 + ppp->rstate |= SC_DC_ERROR;
184 + }
185 ppp_receive_error(ppp);
186 return skb;
187 }
188 @@ -1980,6 +2024,20 @@
189 ocomp->comp_free(ostate);
190 err = 0;
191 }
192 + if (ccp_option[0] == CI_MPPE)
193 + /*
194 + * pppd (userland) has reduced the MTU by MPPE_PAD,
195 + * to accomodate "compressor" growth. We must
196 + * increase the space allocated for compressor
197 + * output in ppp_send_frame() accordingly. Note
198 + * that from a purist's view, it may be more correct
199 + * to require multilink and fragment large packets,
200 + * but that seems inefficient compared to this
201 + * little trick.
202 + */
203 + ppp->xpad = MPPE_PAD;
204 + else
205 + ppp->xpad = 0;
206
207 } else {
208 state = cp->decomp_alloc(ccp_option, data.length);
209 @@ -2251,6 +2309,7 @@
210 /* Initialize the new ppp unit */
211 ppp->file.index = unit;
212 ppp->mru = PPP_MRU;
213 + ppp->mru_alloc = PPP_MRU;
214 init_ppp_file(&ppp->file, INTERFACE);
215 ppp->file.hdrlen = PPP_HDRLEN - 2; /* don't count proto bytes */
216 for (i = 0; i < NUM_NP; ++i)
217 diff -ruN linux-2.4.21.orig/drivers/net/ppp_mppe_crypto.c linux-2.4.21/drivers/net/ppp_mppe_crypto.c
218 --- linux-2.4.21.orig/drivers/net/ppp_mppe_crypto.c 1970-01-01 01:00:00.000000000 +0100
219 +++ linux-2.4.21/drivers/net/ppp_mppe_crypto.c 2003-07-08 19:07:18.000000000 +0200
220 @@ -0,0 +1,257 @@
221 +/*
222 + * ppp_mppe_crypto.c - cryptografic funtions for MPPE
223 + *
224 + * This code is Public Domain. Please see comments below.
225 + *
226 + * I have just put SHA1 and ARCFOUR implementations into one file
227 + * in order to not pollute kernel namespace.
228 + *
229 + * Jan Dubiec <jdx@slackware.pl>, 2003-07-08
230 + */
231 +
232 +/*
233 + * ftp://ftp.funet.fi/pub/crypt/hash/sha/sha1.c
234 + *
235 + * SHA-1 in C
236 + * By Steve Reid <steve@edmweb.com>
237 + * 100% Public Domain
238 + *
239 + * Test Vectors (from FIPS PUB 180-1)
240 + * "abc"
241 + * A9993E36 4706816A BA3E2571 7850C26C 9CD0D89D
242 + * "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq"
243 + * 84983E44 1C3BD26E BAAE4AA1 F95129E5 E54670F1
244 + * A million repetitions of "a"
245 + * 34AA973C D4C4DAA4 F61EEB2B DBAD2731 6534016F
246 + */
247 +
248 +/* #define SHA1HANDSOFF * Copies data before messing with it. */
249 +
250 +#if defined(__linux__)
251 +#include <asm/byteorder.h>
252 +#include <linux/string.h>
253 +#elif defined(__solaris__)
254 +#include <sys/isa_defs.h>
255 +#include <sys/ddi.h>
256 +#include <sys/sunddi.h>
257 +#define memcpy(d, s, c) bcopy(s, d, c)
258 +#define memset(d, b, c) bzero(d, c)
259 +#endif
260 +
261 +#include "ppp_mppe_crypto.h"
262 +
263 +static void SHA1_Transform(unsigned long[5], const unsigned char[64]);
264 +
265 +#define rol(value, bits) (((value) << (bits)) | ((value) >> (32 - (bits))))
266 +
267 +/* blk0() and blk() perform the initial expand. */
268 +/* I got the idea of expanding during the round function from SSLeay */
269 +#if defined(__LITTLE_ENDIAN) || defined(_LITTLE_ENDIAN)
270 +#define blk0(i) (block->l[i] = (rol(block->l[i],24)&0xFF00FF00) \
271 + |(rol(block->l[i],8)&0x00FF00FF))
272 +#elif defined(__BIG_ENDIAN) || defined(_BIG_ENDIAN)
273 +#define blk0(i) block->l[i]
274 +#else
275 +#error Endianness not defined
276 +#endif
277 +#define blk(i) (block->l[i&15] = rol(block->l[(i+13)&15]^block->l[(i+8)&15] \
278 + ^block->l[(i+2)&15]^block->l[i&15],1))
279 +
280 +/* (R0+R1), R2, R3, R4 are the different operations used in SHA1 */
281 +#define R0(v,w,x,y,z,i) z+=((w&(x^y))^y)+blk0(i)+0x5A827999+rol(v,5);w=rol(w,30);
282 +#define R1(v,w,x,y,z,i) z+=((w&(x^y))^y)+blk(i)+0x5A827999+rol(v,5);w=rol(w,30);
283 +#define R2(v,w,x,y,z,i) z+=(w^x^y)+blk(i)+0x6ED9EBA1+rol(v,5);w=rol(w,30);
284 +#define R3(v,w,x,y,z,i) z+=(((w|x)&y)|(w&x))+blk(i)+0x8F1BBCDC+rol(v,5);w=rol(w,30);
285 +#define R4(v,w,x,y,z,i) z+=(w^x^y)+blk(i)+0xCA62C1D6+rol(v,5);w=rol(w,30);
286 +
287 +/* Hash a single 512-bit block. This is the core of the algorithm. */
288 +static void
289 +SHA1_Transform(unsigned long state[5], const unsigned char buffer[64])
290 +{
291 + unsigned long a, b, c, d, e;
292 + typedef union {
293 + unsigned char c[64];
294 + unsigned long l[16];
295 + } CHAR64LONG16;
296 + CHAR64LONG16 *block;
297 +
298 +#ifdef SHA1HANDSOFF
299 + static unsigned char workspace[64];
300 + block = (CHAR64LONG16 *) workspace;
301 + memcpy(block, buffer, 64);
302 +#else
303 + block = (CHAR64LONG16 *) buffer;
304 +#endif
305 + /* Copy context->state[] to working vars */
306 + a = state[0];
307 + b = state[1];
308 + c = state[2];
309 + d = state[3];
310 + e = state[4];
311 + /* 4 rounds of 20 operations each. Loop unrolled. */
312 + R0(a,b,c,d,e, 0); R0(e,a,b,c,d, 1); R0(d,e,a,b,c, 2); R0(c,d,e,a,b, 3);
313 + R0(b,c,d,e,a, 4); R0(a,b,c,d,e, 5); R0(e,a,b,c,d, 6); R0(d,e,a,b,c, 7);
314 + R0(c,d,e,a,b, 8); R0(b,c,d,e,a, 9); R0(a,b,c,d,e,10); R0(e,a,b,c,d,11);
315 + R0(d,e,a,b,c,12); R0(c,d,e,a,b,13); R0(b,c,d,e,a,14); R0(a,b,c,d,e,15);
316 + R1(e,a,b,c,d,16); R1(d,e,a,b,c,17); R1(c,d,e,a,b,18); R1(b,c,d,e,a,19);
317 + R2(a,b,c,d,e,20); R2(e,a,b,c,d,21); R2(d,e,a,b,c,22); R2(c,d,e,a,b,23);
318 + R2(b,c,d,e,a,24); R2(a,b,c,d,e,25); R2(e,a,b,c,d,26); R2(d,e,a,b,c,27);
319 + R2(c,d,e,a,b,28); R2(b,c,d,e,a,29); R2(a,b,c,d,e,30); R2(e,a,b,c,d,31);
320 + R2(d,e,a,b,c,32); R2(c,d,e,a,b,33); R2(b,c,d,e,a,34); R2(a,b,c,d,e,35);
321 + R2(e,a,b,c,d,36); R2(d,e,a,b,c,37); R2(c,d,e,a,b,38); R2(b,c,d,e,a,39);
322 + R3(a,b,c,d,e,40); R3(e,a,b,c,d,41); R3(d,e,a,b,c,42); R3(c,d,e,a,b,43);
323 + R3(b,c,d,e,a,44); R3(a,b,c,d,e,45); R3(e,a,b,c,d,46); R3(d,e,a,b,c,47);
324 + R3(c,d,e,a,b,48); R3(b,c,d,e,a,49); R3(a,b,c,d,e,50); R3(e,a,b,c,d,51);
325 + R3(d,e,a,b,c,52); R3(c,d,e,a,b,53); R3(b,c,d,e,a,54); R3(a,b,c,d,e,55);
326 + R3(e,a,b,c,d,56); R3(d,e,a,b,c,57); R3(c,d,e,a,b,58); R3(b,c,d,e,a,59);
327 + R4(a,b,c,d,e,60); R4(e,a,b,c,d,61); R4(d,e,a,b,c,62); R4(c,d,e,a,b,63);
328 + R4(b,c,d,e,a,64); R4(a,b,c,d,e,65); R4(e,a,b,c,d,66); R4(d,e,a,b,c,67);
329 + R4(c,d,e,a,b,68); R4(b,c,d,e,a,69); R4(a,b,c,d,e,70); R4(e,a,b,c,d,71);
330 + R4(d,e,a,b,c,72); R4(c,d,e,a,b,73); R4(b,c,d,e,a,74); R4(a,b,c,d,e,75);
331 + R4(e,a,b,c,d,76); R4(d,e,a,b,c,77); R4(c,d,e,a,b,78); R4(b,c,d,e,a,79);
332 + /* Add the working vars back into context.state[] */
333 + state[0] += a;
334 + state[1] += b;
335 + state[2] += c;
336 + state[3] += d;
337 + state[4] += e;
338 + /* Wipe variables */
339 + a = b = c = d = e = 0;
340 +}
341 +
342 +/* SHA1Init - Initialize new context */
343 +void
344 +SHA1_Init(SHA1_CTX *context)
345 +{
346 + /* SHA1 initialization constants */
347 + context->state[0] = 0x67452301;
348 + context->state[1] = 0xEFCDAB89;
349 + context->state[2] = 0x98BADCFE;
350 + context->state[3] = 0x10325476;
351 + context->state[4] = 0xC3D2E1F0;
352 + context->count[0] = context->count[1] = 0;
353 +}
354 +
355 +/* Run your data through this. */
356 +void
357 +SHA1_Update(SHA1_CTX *context, const unsigned char *data, unsigned int len)
358 +{
359 + unsigned int i, j;
360 +
361 + j = (context->count[0] >> 3) & 63;
362 + if ((context->count[0] += len << 3) < (len << 3)) context->count[1]++;
363 + context->count[1] += (len >> 29);
364 + if ((j + len) > 63) {
365 + memcpy(&context->buffer[j], data, (i = 64-j));
366 + SHA1_Transform(context->state, context->buffer);
367 + for ( ; i + 63 < len; i += 64) {
368 + SHA1_Transform(context->state, &data[i]);
369 + }
370 + j = 0;
371 + }
372 + else
373 + i = 0;
374 +
375 + memcpy(&context->buffer[j], &data[i], len - i);
376 +}
377 +
378 +/* Add padding and return the message digest. */
379 +void
380 +SHA1_Final(unsigned char digest[20], SHA1_CTX *context)
381 +{
382 + unsigned long i, j;
383 + unsigned char finalcount[8];
384 +
385 + for (i = 0; i < 8; i++) {
386 + finalcount[i] = (unsigned char)((context->count[(i >= 4 ? 0 : 1)]
387 + >> ((3-(i & 3)) * 8) ) & 255); /* Endian independent */
388 + }
389 + SHA1_Update(context, (unsigned char *) "\200", 1);
390 + while ((context->count[0] & 504) != 448) {
391 + SHA1_Update(context, (unsigned char *) "\0", 1);
392 + }
393 + SHA1_Update(context, finalcount, 8); /* Should cause a SHA1Transform() */
394 + for (i = 0; i < 20; i++) {
395 + digest[i] = (unsigned char)
396 + ((context->state[i>>2] >> ((3-(i & 3)) * 8) ) & 255);
397 + }
398 + /* Wipe variables */
399 + i = j = 0;
400 + memset(context->buffer, 0, 64);
401 + memset(context->state, 0, 20);
402 + memset(context->count, 0, 8);
403 + memset(&finalcount, 0, 8);
404 +#ifdef SHA1HANDSOFF /* make SHA1Transform overwrite it's own static vars */
405 + SHA1Transform(context->state, context->buffer);
406 +#endif
407 +}
408 +
409 +/*
410 + * arcfour.c
411 + * by Frank Cusack <frank@google.com>
412 + * 100% public domain
413 + *
414 + * Implemented from the description in _Applied Cryptography_, 2nd ed.
415 + *
416 + * ** Distribution ** of this software is unlimited and unrestricted.
417 + *
418 + * ** Use ** of this software is almost certainly legal; however, refer
419 + * to <http://theory.lcs.mit.edu/~rivest/faq.html>.
420 + */
421 +
422 +#define swap(a, b) \
423 +{ \
424 + unsigned char t = b; \
425 + b = a; \
426 + a = t; \
427 +}
428 +
429 +/*
430 + * Initialize arcfour from a key.
431 + */
432 +void
433 +arcfour_setkey(arcfour_context *context, const unsigned char *key,
434 + unsigned keylen)
435 +{
436 + unsigned i, j;
437 + unsigned char K[256];
438 +
439 + context->i = context->j = 0;
440 +
441 + for (i = 0; i < 256; i++) {
442 + context->S[i] = i;
443 + K[i] = key[i % keylen];
444 + }
445 +
446 + j = 0;
447 + for (i = 0; i < 256; i++) {
448 + j = (j + context->S[i] + K[i]) % 256;
449 + swap(context->S[i], context->S[j]);
450 + }
451 +
452 + memset(K, 0, sizeof(K));
453 +}
454 +
455 +/*
456 + * plaintext -> ciphertext (or vice versa)
457 + */
458 +void
459 +arcfour_encrypt(arcfour_context *context, const unsigned char *in, unsigned len,
460 + unsigned char *out)
461 +{
462 + unsigned i = context->i;
463 + unsigned j = context->j;
464 + unsigned char *S = context->S;
465 + unsigned char K;
466 +
467 + while (len--) {
468 + i = (i + 1) % 256;
469 + j = (j + S[i]) % 256;
470 + swap(S[i], S[j]);
471 + K = S[(S[i] + S[j]) % 256];
472 + *out++ = *in++ ^ K;
473 + }
474 +
475 + context->i = i;
476 + context->j = j;
477 +}
478 diff -ruN linux-2.4.21.orig/drivers/net/ppp_mppe_crypto.h linux-2.4.21/drivers/net/ppp_mppe_crypto.h
479 --- linux-2.4.21.orig/drivers/net/ppp_mppe_crypto.h 1970-01-01 01:00:00.000000000 +0100
480 +++ linux-2.4.21/drivers/net/ppp_mppe_crypto.h 2003-07-08 19:07:25.000000000 +0200
481 @@ -0,0 +1,40 @@
482 +/*
483 + * ppp_mppe_crypto.h - cryptografic funtion prototypes for MPPE
484 + *
485 + * This code is Public Domain. Please see comments below.
486 + *
487 + * I have just put SHA1 and ARCFOUR declarations into one file
488 + * in order to not pollute kernel namespace.
489 + *
490 + * Jan Dubiec <jdx@slackware.pl>, 2003-07-08
491 + */
492 +
493 +#ifndef _PPP_MPPE_CRYPTO_
494 +#define _PPP_MPPE_CRYPTO_
495 +
496 +/* SHA1 definitions and prototypes */
497 +typedef struct {
498 + unsigned long state[5];
499 + unsigned long count[2];
500 + unsigned char buffer[64];
501 +} SHA1_CTX;
502 +
503 +#define SHA1_SIGNATURE_SIZE 20
504 +
505 +extern void SHA1_Init(SHA1_CTX *);
506 +extern void SHA1_Update(SHA1_CTX *, const unsigned char *, unsigned int);
507 +extern void SHA1_Final(unsigned char[SHA1_SIGNATURE_SIZE], SHA1_CTX *);
508 +
509 +/* ARCFOUR (aka RC4) definitions and prototypes */
510 +typedef struct {
511 + unsigned i;
512 + unsigned j;
513 + unsigned char S[256];
514 +} arcfour_context;
515 +
516 +extern void arcfour_setkey(arcfour_context *, const unsigned char *, unsigned);
517 +extern void arcfour_encrypt(arcfour_context *, const unsigned char *, unsigned,
518 + unsigned char *);
519 +#define arcfour_decrypt arcfour_encrypt
520 +
521 +#endif /* _PPP_MPPE_CRYPTO_ */
522 diff -ruN linux-2.4.21.orig/drivers/net/ppp_mppe_mppc_comp.c linux-2.4.21/drivers/net/ppp_mppe_mppc_comp.c
523 --- linux-2.4.21.orig/drivers/net/ppp_mppe_mppc_comp.c 1970-01-01 01:00:00.000000000 +0100
524 +++ linux-2.4.21/drivers/net/ppp_mppe_mppc_comp.c 2003-08-07 22:36:59.000000000 +0200
525 @@ -0,0 +1,1144 @@
526 +/*
527 + * ppp_mppe_mppc_comp.c - MPPC/MPPE "compressor/decompressor" module.
528 + *
529 + * Copyright (c) 1994 Árpád Magosányi <mag@bunuel.tii.matav.hu>
530 + * Copyright (c) 1999 Tim Hockin, Cobalt Networks Inc. <thockin@cobaltnet.com>
531 + * Copyright (c) 2002, 2003 Jan Dubiec <jdx@slackware.pl>
532 + *
533 + * Permission to use, copy, modify, and distribute this software and its
534 + * documentation is hereby granted, provided that the above copyright
535 + * notice appears in all copies. This software is provided without any
536 + * warranty, express or implied.
537 + *
538 + * The code is based on MPPE kernel module written by Árpád Magosányi and
539 + * Tim Hockin which can be found on http://planetmirror.com/pub/mppe/.
540 + * I have added MPPC and 56 bit session keys support in MPPE.
541 + *
542 + * WARNING! Although this is open source code, its usage in some countries
543 + * (in particular in the USA) may violate Stac Inc. patent for MPPC.
544 + *
545 + * Compile command:
546 + * gcc -O2 -Wall -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c ppp_mppe_mppc_comp.c
547 + *
548 + * ==FILEVERSION 20030807==
549 + *
550 + */
551 +
552 +#include <linux/module.h>
553 +#include <linux/slab.h>
554 +#include <linux/vmalloc.h>
555 +#include <linux/init.h>
556 +
557 +#include <linux/ppp_defs.h>
558 +#include <linux/ppp-comp.h>
559 +
560 +#include "ppp_mppe_crypto.h"
561 +
562 +/*
563 + * State for a mppc/mppe "(de)compressor".
564 + */
565 +struct ppp_mppe_state {
566 + arcfour_context arcfour_context;
567 + u8 master_key[MPPE_MAX_KEY_LEN];
568 + u8 session_key[MPPE_MAX_KEY_LEN];
569 + u8 mppc; /* do we use compression (MPPC)? */
570 + u8 mppe; /* do we use encryption (MPPE)? */
571 + u8 keylen; /* key length in bytes */
572 + u8 bitkeylen; /* key length in bits */
573 + u16 ccount; /* coherency counter */
574 + u16 bits; /* MPPC/MPPE control bits */
575 + u8 stateless; /* do we use stateless mode? */
576 + u8 nextflushed; /* set A bit in the next outgoing packet;
577 + used only by compressor*/
578 + u8 flushexpected; /* drop packets until A bit is received;
579 + used only by decompressor*/
580 + u8 *hist; /* MPPC history */
581 + u16 *hash; /* Hash table; used only by compressor */
582 + u16 histptr; /* history "cursor" */
583 + int unit;
584 + int debug;
585 + int mru;
586 + struct compstat stats;
587 +};
588 +
589 +#define MPPE_OVHD 2 /* MPPE overhead */
590 +#define MPPE_HIST_LEN 8192 /* MPPC history size */
591 +#define MPPE_MAX_CCOUNT 0x0FFF /* max. coherency counter value */
592 +
593 +#define MPPE_BIT_FLUSHED 0x80 /* bit A */
594 +#define MPPE_BIT_RESET 0x40 /* bit B */
595 +#define MPPE_BIT_COMP 0x20 /* bit C */
596 +#define MPPE_BIT_ENCRYPTED 0x10 /* bit D */
597 +
598 +#define MPPE_SALT0 0xD1 /* values used in MPPE key derivation */
599 +#define MPPE_SALT1 0x26 /* according to RFC3079 */
600 +#define MPPE_SALT2 0x9E
601 +
602 +#define MPPE_CCOUNT(x) ((((x)[4] & 0x0f) << 8) + (x)[5])
603 +#define MPPE_BITS(x) ((x)[4] & 0xf0)
604 +#define MPPE_CTRLHI(x) ((((x)->ccount & 0xf00)>>8)|((x)->bits))
605 +#define MPPE_CTRLLO(x) ((x)->ccount & 0xff)
606 +
607 +/*
608 + * Key Derivation, from RFC 3078, RFC 3079.
609 + * Equivalent to Get_Key() for MS-CHAP as described in RFC 3079.
610 + */
611 +static void
612 +GetNewKeyFromSHA(unsigned char *MasterKey, unsigned char *SessionKey,
613 + unsigned long SessionKeyLength, unsigned char *InterimKey)
614 +{
615 + /*Pads used in key derivation */
616 + static unsigned char SHAPad1[40] =
617 + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
618 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
619 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
620 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
621 +
622 + static unsigned char SHAPad2[40] =
623 + { 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
624 + 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
625 + 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
626 + 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2 };
627 +
628 + SHA1_CTX Context;
629 + unsigned char Digest[SHA1_SIGNATURE_SIZE];
630 +
631 + SHA1_Init(&Context);
632 + SHA1_Update(&Context, MasterKey, SessionKeyLength);
633 + SHA1_Update(&Context, SHAPad1, sizeof(SHAPad1));
634 + SHA1_Update(&Context, SessionKey, SessionKeyLength);
635 + SHA1_Update(&Context, SHAPad2, sizeof(SHAPad2));
636 + SHA1_Final(Digest,&Context);
637 + memcpy(InterimKey, Digest, SessionKeyLength);
638 +}
639 +
640 +static void
641 +mppe_change_key(struct ppp_mppe_state *state, int initialize)
642 +{
643 + unsigned char InterimKey[MPPE_MAX_KEY_LEN];
644 +
645 + GetNewKeyFromSHA(state->master_key, state->session_key,
646 + state->keylen, InterimKey);
647 + if (initialize) {
648 + memcpy(state->session_key, InterimKey, state->keylen);
649 + } else {
650 + arcfour_setkey(&state->arcfour_context, InterimKey, state->keylen);
651 + arcfour_encrypt(&state->arcfour_context, InterimKey, state->keylen,
652 + state->session_key);
653 + }
654 + if (state->keylen == 8) {
655 + if (state->bitkeylen == 40) {
656 + state->session_key[0] = MPPE_SALT0;
657 + state->session_key[1] = MPPE_SALT1;
658 + state->session_key[2] = MPPE_SALT2;
659 + } else {
660 + state->session_key[0] = MPPE_SALT0;
661 + }
662 + }
663 + arcfour_setkey(&state->arcfour_context, state->session_key, state->keylen);
664 +}
665 +
666 +/* increase 12-bit coherency counter */
667 +static inline void
668 +mppe_increase_ccount(struct ppp_mppe_state *state)
669 +{
670 + state->ccount = (state->ccount + 1) & MPPE_MAX_CCOUNT;
671 + if (state->mppe) {
672 + if (state->stateless) {
673 + mppe_change_key(state, 0);
674 + state->nextflushed = 1;
675 + } else {
676 + if ((state->ccount & 0xff) == 0xff) {
677 + mppe_change_key(state, 0);
678 + state->nextflushed = 1;
679 + }
680 + }
681 + }
682 +}
683 +
684 +/* allocate space for a MPPE/MPPC (de)compressor. */
685 +/* comp != 0 -> init compressor */
686 +/* comp = 0 -> init decompressor */
687 +static void *
688 +mppe_alloc(unsigned char *options, int opt_len, int comp)
689 +{
690 + struct ppp_mppe_state *state;
691 + u8* fname;
692 +
693 + fname = comp ? "mppe_comp_alloc" : "mppe_decomp_alloc";
694 +
695 + /*
696 + Hack warning - additionally to the standard MPPC/MPPE configuration
697 + options, pppd passes to the (de)copressor 8 or 16 byte session key.
698 + Therefore options[1] contains MPPC/MPPE configuration option length
699 + (CILEN_MPPE = 6), but the real options length, depending on the key
700 + length, is 6+8 or 6+16.
701 + */
702 + if (opt_len < CILEN_MPPE) {
703 + printk(KERN_WARNING "%s: wrong options length: %u\n", fname, opt_len);
704 + return NULL;
705 + }
706 +
707 + if (options[0] != CI_MPPE || options[1] != CILEN_MPPE ||
708 + (options[2] & ~MPPE_STATELESS) != 0 ||
709 + options[3] != 0 || options[4] != 0 ||
710 + (options[5] & ~(MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) != 0 ||
711 + (options[5] & (MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) == 0) {
712 + printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, "
713 + "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, options[0],
714 + options[1], options[2], options[3], options[4], options[5]);
715 + return NULL;
716 + }
717 +
718 + state = (struct ppp_mppe_state *)kmalloc(sizeof(*state), GFP_KERNEL);
719 + if (state == NULL) {
720 + printk(KERN_ERR "%s: cannot allocate space for %scompressor\n", fname,
721 + comp ? "" : "de");
722 + return NULL;
723 + }
724 + memset(state, 0, sizeof(struct ppp_mppe_state));
725 +
726 + state->mppc = options[5] & MPPE_MPPC; /* Do we use MPPC? */
727 + state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT |
728 + MPPE_40BIT); /* Do we use MPPE? */
729 +
730 + if (state->mppc) {
731 + /* allocate MPPC history */
732 + state->hist = (u8*)vmalloc(2*MPPE_HIST_LEN*sizeof(u8));
733 + if (state->hist == NULL) {
734 + kfree(state);
735 + printk(KERN_ERR "%s: cannot allocate space for MPPC history\n",
736 + fname);
737 + return NULL;
738 + }
739 +
740 + /* allocate hashtable for MPPC compressor */
741 + if (comp) {
742 + state->hash = (u16*)vmalloc(MPPE_HIST_LEN*sizeof(u16));
743 + if (state->hash == NULL) {
744 + vfree(state->hist);
745 + kfree(state);
746 + printk(KERN_ERR "%s: cannot allocate space for MPPC history\n",
747 + fname);
748 + return NULL;
749 + }
750 + }
751 + }
752 +
753 + MOD_INC_USE_COUNT;
754 +
755 + if (state->mppe) { /* specific for MPPE */
756 + memcpy(state->master_key, options+CILEN_MPPE, MPPE_MAX_KEY_LEN);
757 + memcpy(state->session_key, state->master_key, MPPE_MAX_KEY_LEN);
758 + /* initial key generation is done in mppe_init() */
759 + }
760 +
761 + return (void *) state;
762 +}
763 +
764 +static void *
765 +mppe_comp_alloc(unsigned char *options, int opt_len)
766 +{
767 + return mppe_alloc(options, opt_len, 1);
768 +}
769 +
770 +static void *
771 +mppe_decomp_alloc(unsigned char *options, int opt_len)
772 +{
773 + return mppe_alloc(options, opt_len, 0);
774 +}
775 +
776 +/* cleanup the (de)compressor */
777 +static void
778 +mppe_comp_free(void *arg)
779 +{
780 + struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
781 +
782 + if (state != NULL) {
783 + if (state->hist != NULL)
784 + vfree(state->hist);
785 + if (state->hash != NULL)
786 + vfree(state->hash);
787 + kfree(state);
788 + }
789 + MOD_DEC_USE_COUNT;
790 +}
791 +
792 +/* init MPPC/MPPE (de)compresor */
793 +/* comp != 0 -> init compressor */
794 +/* comp = 0 -> init decompressor */
795 +static int
796 +mppe_init(void *arg, unsigned char *options, int opt_len, int unit,
797 + int hdrlen, int mru, int debug, int comp)
798 +{
799 + struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
800 + u8* fname;
801 +
802 + fname = comp ? "mppe_comp_init" : "mppe_decomp_init";
803 +
804 + if (opt_len < CILEN_MPPE) {
805 + if (debug)
806 + printk(KERN_WARNING "%s: wrong options length: %u\n",
807 + fname, opt_len);
808 + return 0;
809 + }
810 +
811 + if (options[0] != CI_MPPE || options[1] != CILEN_MPPE ||
812 + (options[2] & ~MPPE_STATELESS) != 0 ||
813 + options[3] != 0 || options[4] != 0 ||
814 + (options[5] & ~(MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) != 0 ||
815 + (options[5] & (MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) == 0) {
816 + if (debug)
817 + printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, "
818 + "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname,
819 + options[0], options[1], options[2], options[3], options[4],
820 + options[5]);
821 + return 0;
822 + }
823 +
824 + if ((options[5] & ~MPPE_MPPC) != MPPE_128BIT &&
825 + (options[5] & ~MPPE_MPPC) != MPPE_56BIT &&
826 + (options[5] & ~MPPE_MPPC) != MPPE_40BIT &&
827 + (options[5] & MPPE_MPPC) != MPPE_MPPC) {
828 + if (debug)
829 + printk(KERN_WARNING "%s: don't know what to do: o[5]=%02x\n",
830 + fname, options[5]);
831 + return 0;
832 + }
833 +
834 + state->mppc = options[5] & MPPE_MPPC; /* Do we use MPPC? */
835 + state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT |
836 + MPPE_40BIT); /* Do we use MPPE? */
837 + state->stateless = options[2] & MPPE_STATELESS; /* Do we use stateless mode? */
838 +
839 + switch (state->mppe) {
840 + case MPPE_40BIT: /* 40 bit key */
841 + state->keylen = 8;
842 + state->bitkeylen = 40;
843 + break;
844 + case MPPE_56BIT: /* 56 bit key */
845 + state->keylen = 8;
846 + state->bitkeylen = 56;
847 + break;
848 + case MPPE_128BIT: /* 128 bit key */
849 + state->keylen = 16;
850 + state->bitkeylen = 128;
851 + break;
852 + default:
853 + state->keylen = 0;
854 + state->bitkeylen = 0;
855 + }
856 +
857 + state->ccount = MPPE_MAX_CCOUNT;
858 + state->bits = 0;
859 + state->unit = unit;
860 + state->debug = debug;
861 + state->histptr = MPPE_HIST_LEN;
862 + if (state->mppc) { /* reset history if MPPC was negotiated */
863 + memset(state->hist, 0, 2*MPPE_HIST_LEN*sizeof(u8));
864 + }
865 +
866 + if (state->mppe) { /* generate initial session keys */
867 + mppe_change_key(state, 1);
868 + }
869 +
870 + if (comp) { /* specific for compressor */
871 + state->nextflushed = 1;
872 + } else { /* specific for decompressor */
873 + state->mru = mru;
874 + state->flushexpected = 1;
875 + }
876 +
877 + return 1;
878 +}
879 +
880 +static int
881 +mppe_comp_init(void *arg, unsigned char *options, int opt_len, int unit,
882 + int hdrlen, int debug)
883 +{
884 + return mppe_init(arg, options, opt_len, unit, hdrlen, 0, debug, 1);
885 +}
886 +
887 +
888 +static int
889 +mppe_decomp_init(void *arg, unsigned char *options, int opt_len, int unit,
890 + int hdrlen, int mru, int debug)
891 +{
892 + return mppe_init(arg, options, opt_len, unit, hdrlen, mru, debug, 0);
893 +}
894 +
895 +static void
896 +mppe_comp_reset(void *arg)
897 +{
898 + struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
899 +
900 + if (state->debug)
901 + printk(KERN_DEBUG "%s%d: resetting MPPC/MPPE compressor\n",
902 + __FUNCTION__, state->unit);
903 +
904 + state->nextflushed = 1;
905 + if (state->mppe)
906 + arcfour_setkey(&state->arcfour_context, state->session_key,
907 + state->keylen);
908 +}
909 +
910 +static void
911 +mppe_decomp_reset(void *arg)
912 +{
913 + /* When MPPC/MPPE is in use, we shouldn't receive any CCP Reset-Ack.
914 + But when we receive such a packet, we just ignore it. */
915 + return;
916 +}
917 +
918 +static void
919 +mppe_stats(void *arg, struct compstat *stats)
920 +{
921 + struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
922 +
923 + *stats = state->stats;
924 +}
925 +
926 +/***************************/
927 +/**** Compression stuff ****/
928 +/***************************/
929 +/* inserts 1 to max. 8 bits into the output buffer */
930 +static inline void putbits8(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
931 +{
932 + buf += *i;
933 + if (*l >= n) {
934 + *l = (*l) - n;
935 + val <<= *l;
936 + *buf = *buf | (val & 0xff);
937 + if (*l == 0) {
938 + *l = 8;
939 + (*i)++;
940 + *(++buf) = 0;
941 + }
942 + } else {
943 + (*i)++;
944 + *l = 8 - n + (*l);
945 + val <<= *l;
946 + *buf = *buf | ((val >> 8) & 0xff);
947 + *(++buf) = val & 0xff;
948 + }
949 +}
950 +
951 +/* inserts 9 to max. 16 bits into the output buffer */
952 +static inline void putbits16(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
953 +{
954 + buf += *i;
955 + if (*l >= n - 8) {
956 + (*i)++;
957 + *l = 8 - n + (*l);
958 + val <<= *l;
959 + *buf = *buf | ((val >> 8) & 0xff);
960 + *(++buf) = val & 0xff;
961 + if (*l == 0) {
962 + *l = 8;
963 + (*i)++;
964 + *(++buf) = 0;
965 + }
966 + } else {
967 + (*i)++; (*i)++;
968 + *l = 16 - n + (*l);
969 + val <<= *l;
970 + *buf = *buf | ((val >> 16) & 0xff);
971 + *(++buf) = (val >> 8) & 0xff;
972 + *(++buf) = val & 0xff;
973 + }
974 +}
975 +
976 +/* inserts 17 to max. 24 bits into the output buffer */
977 +static inline void putbits24(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
978 +{
979 + buf += *i;
980 + if (*l >= n - 16) {
981 + (*i)++; (*i)++;
982 + *l = 16 - n + (*l);
983 + val <<= *l;
984 + *buf = *buf | ((val >> 16) & 0xff);
985 + *(++buf) = (val >> 8) & 0xff;
986 + *(++buf) = val & 0xff;
987 + if (*l == 0) {
988 + *l = 8;
989 + (*i)++;
990 + *(++buf) = 0;
991 + }
992 + } else {
993 + (*i)++; (*i)++; (*i)++;
994 + *l = 24 - n + (*l);
995 + val <<= *l;
996 + *buf = *buf | ((val >> 24) & 0xff);
997 + *(++buf) = (val >> 16) & 0xff;
998 + *(++buf) = (val >> 8) & 0xff;
999 + *(++buf) = val & 0xff;
1000 + }
1001 +}
1002 +
1003 +static int
1004 +mppc_compress(struct ppp_mppe_state *state, unsigned char *ibuf,
1005 + unsigned char *obuf, int isize, int osize)
1006 +{
1007 + u32 olen, off, len, idx, i, l;
1008 + u8 *hist, *sbuf, *p, *q, *r, *s;
1009 +
1010 + /*
1011 + At this point, to avoid possible buffer overflow caused by packet
1012 + expansion during/after compression, we should make sure that
1013 + osize >= (((isize*9)/8)+1)+2, but we don't do that because in
1014 + ppp_generic.c we just allocate bigger obuf.
1015 +
1016 + Maximum MPPC packet expansion is 12.5%. This is the worst case when
1017 + all octets in the input buffer are >= 0x80 and we cannot find any
1018 + repeated tokens. Additionally we have to reserve 2 bytes for MPPE/MPPC
1019 + status bits and coherency counter.
1020 + */
1021 +
1022 + hist = state->hist + MPPE_HIST_LEN;
1023 + /* check if there is enough room at the end of the history */
1024 + if (state->histptr + isize >= 2*MPPE_HIST_LEN) {
1025 + state->bits |= MPPE_BIT_RESET;
1026 + state->histptr = MPPE_HIST_LEN;
1027 + memcpy(state->hist, hist, MPPE_HIST_LEN);
1028 + }
1029 + /* add packet to the history; isize must be <= MPPE_HIST_LEN */
1030 + sbuf = state->hist + state->histptr;
1031 + memcpy(sbuf, ibuf, isize);
1032 + state->histptr += isize;
1033 +
1034 + /* compress data */
1035 + r = sbuf + isize;
1036 + *obuf = olen = i = 0;
1037 + l = 8;
1038 + while (i < isize - 2) {
1039 + s = q = sbuf + i;
1040 + idx = ((40542*((((s[0]<<4)^s[1])<<4)^s[2]))>>4) & 0x1FFF;
1041 + p = hist + state->hash[idx];
1042 + state->hash[idx] = (u16) (s - hist);
1043 + off = s - p;
1044 + if (off > 8191 || off < 1 || *p++ != *s++ || *p++ != *s++ || *p++ != *s++)
1045 + goto literal;
1046 + if (r - q >= 64) {
1047 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1048 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1049 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1050 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1051 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1052 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1053 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1054 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1055 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1056 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1057 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1058 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1059 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1060 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1061 + *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
1062 + *p++ != *s++;
1063 + if (s - q == 64) {
1064 + p--; s--;
1065 + while((*p++ == *s++) && (s < r));
1066 + }
1067 + } else {
1068 + while((*p++ == *s++) && (s < r));
1069 + }
1070 + len = s - q - 1;
1071 + i += len;
1072 +
1073 + /* at least 3 character match found; code data */
1074 + /* encode offset */
1075 + if (off < 64) { /* 10-bit offset; 0 <= offset < 64 */
1076 + putbits16(obuf, 0x3c0|off, 10, &olen, &l);
1077 + } else if (off < 320) { /* 12-bit offset; 64 <= offset < 320 */
1078 + putbits16(obuf, 0xe00|(off-64), 12, &olen, &l);
1079 + } else if (off < 8192) { /* 16-bit offset; 320 <= offset < 8192 */
1080 + putbits16(obuf, 0xc000|(off-320), 16, &olen, &l);
1081 + } else {
1082 + /* This shouldn't happen; we return 0 what means "packet expands",
1083 + and we send packet uncompressed. */
1084 + if (state->debug)
1085 + printk(KERN_DEBUG "%s%d: wrong offset value: %d\n",
1086 + __FUNCTION__, state->unit, off);
1087 + return 0;
1088 + }
1089 + /* encode length of match */
1090 + if (len < 4) { /* length = 3 */
1091 + putbits8(obuf, 0, 1, &olen, &l);
1092 + } else if (len < 8) { /* 4 <= length < 8 */
1093 + putbits8(obuf, 0x08|(len&0x03), 4, &olen, &l);
1094 + } else if (len < 16) { /* 8 <= length < 16 */
1095 + putbits8(obuf, 0x30|(len&0x07), 6, &olen, &l);
1096 + } else if (len < 32) { /* 16 <= length < 32 */
1097 + putbits8(obuf, 0xe0|(len&0x0f), 8, &olen, &l);
1098 + } else if (len < 64) { /* 32 <= length < 64 */
1099 + putbits16(obuf, 0x3c0|(len&0x1f), 10, &olen, &l);
1100 + } else if (len < 128) { /* 64 <= length < 128 */
1101 + putbits16(obuf, 0xf80|(len&0x3f), 12, &olen, &l);
1102 + } else if (len < 256) { /* 128 <= length < 256 */
1103 + putbits16(obuf, 0x3f00|(len&0x7f), 14, &olen, &l);
1104 + } else if (len < 512) { /* 256 <= length < 512 */
1105 + putbits16(obuf, 0xfe00|(len&0xff), 16, &olen, &l);
1106 + } else if (len < 1024) { /* 512 <= length < 1024 */
1107 + putbits24(obuf, 0x3fc00|(len&0x1ff), 18, &olen, &l);
1108 + } else if (len < 2048) { /* 1024 <= length < 2048 */
1109 + putbits24(obuf, 0xff800|(len&0x3ff), 20, &olen, &l);
1110 + } else if (len < 4096) { /* 2048 <= length < 4096 */
1111 + putbits24(obuf, 0x3ff000|(len&0x7ff), 22, &olen, &l);
1112 + } else if (len < 8192) { /* 4096 <= length < 8192 */
1113 + putbits24(obuf, 0xffe000|(len&0xfff), 24, &olen, &l);
1114 + } else {
1115 + /* This shouldn't happen; we return 0 what means "packet expands",
1116 + and send packet uncompressed. */
1117 + if (state->debug)
1118 + printk(KERN_DEBUG "%s%d: wrong length of match value: %d\n",
1119 + __FUNCTION__, state->unit, len);
1120 + return 0;
1121 + }
1122 + continue;
1123 +
1124 + literal:
1125 + /* no match found; encode literal byte */
1126 + if (ibuf[i] < 0x80) { /* literal byte < 0x80 */
1127 + putbits8(obuf, (u32) ibuf[i++], 8, &olen, &l);
1128 + } else { /* literal byte >= 0x80 */
1129 + putbits16(obuf, (u32) (0x100|(ibuf[i++]&0x7f)), 9, &olen, &l);
1130 + }
1131 + }
1132 +
1133 + /* Add remaining octets to the output */
1134 + while(isize - i > 0) {
1135 + if (ibuf[i] < 0x80) { /* literal byte < 0x80 */
1136 + putbits8(obuf, (u32) ibuf[i++], 8, &olen, &l);
1137 + } else { /* literal byte >= 0x80 */
1138 + putbits16(obuf, (u32) (0x100|(ibuf[i++]&0x7f)), 9, &olen, &l);
1139 + }
1140 + }
1141 + /* Reset unused bits of the last output octet */
1142 + if ((l != 0) && (l != 8)) {
1143 + putbits8(obuf, 0, l, &olen, &l);
1144 + }
1145 +
1146 + return (int) olen;
1147 +}
1148 +
1149 +int
1150 +mppe_compress(void *arg, unsigned char *ibuf, unsigned char *obuf,
1151 + int isize, int osize)
1152 +{
1153 + struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
1154 + int proto, olen, complen;
1155 + unsigned char *wptr;
1156 +
1157 + /* Check that the protocol is in the range we handle. */
1158 + proto = PPP_PROTOCOL(ibuf);
1159 + if (proto < 0x0021 || proto > 0x00fa)
1160 + return 0;
1161 +
1162 + wptr = obuf;
1163 + /* Copy over the PPP header */
1164 + wptr[0] = PPP_ADDRESS(ibuf);
1165 + wptr[1] = PPP_CONTROL(ibuf);
1166 + wptr[2] = PPP_COMP >> 8;
1167 + wptr[3] = PPP_COMP;
1168 + wptr += PPP_HDRLEN + MPPE_OVHD; /* Leave two octets for MPPE/MPPC bits */
1169 +
1170 + mppe_increase_ccount(state);
1171 +
1172 + if (state->nextflushed) {
1173 + if (!state->stateless) {
1174 + state->nextflushed = 0;
1175 + }
1176 + state->bits |= MPPE_BIT_FLUSHED;
1177 + if (state->mppc) { /* reset history */
1178 + state->bits |= MPPE_BIT_RESET;
1179 + state->histptr = MPPE_HIST_LEN;
1180 + memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8));
1181 + }
1182 + }
1183 +
1184 + if (state->mppc && !state->mppe) { /* Do only compression */
1185 + complen = mppc_compress(state, ibuf+2, wptr, isize-2,
1186 + osize-PPP_HDRLEN-MPPE_OVHD);
1187 + if ((complen > isize) || (complen == 0)) {
1188 + /* packet expands */
1189 + state->nextflushed = 1;
1190 + memcpy(wptr, ibuf+2, isize-2);
1191 + olen = isize + (PPP_HDRLEN / 2) + MPPE_OVHD;
1192 + (state->stats).inc_bytes += olen;
1193 + (state->stats).inc_packets++;
1194 + } else {
1195 + state->bits |= MPPE_BIT_COMP;
1196 + olen = complen + PPP_HDRLEN + MPPE_OVHD;
1197 + (state->stats).comp_bytes += olen;
1198 + (state->stats).comp_packets++;
1199 + }
1200 + } else {
1201 + if (!state->mppc && state->mppe) { /* Do only encryption */
1202 + /* read from ibuf, write to wptr, adjust for PPP_HDRLEN */
1203 + arcfour_encrypt(&state->arcfour_context, ibuf+2, isize-2, wptr);
1204 + state->bits |= MPPE_BIT_ENCRYPTED;
1205 + olen = isize + (PPP_HDRLEN / 2) + MPPE_OVHD;
1206 + (state->stats).inc_bytes += olen;
1207 + (state->stats).inc_packets++;
1208 + } else { /* Do compression and then encryption - RFC3078 */
1209 + complen = mppc_compress(state, ibuf+2, wptr, isize-2,
1210 + osize-PPP_HDRLEN-MPPE_OVHD);
1211 + if ((complen > isize) || (complen == 0)) {
1212 + /* packet expands */
1213 + memcpy(wptr, ibuf+2, isize-2);
1214 + state->nextflushed = 1;
1215 + arcfour_encrypt(&state->arcfour_context, ibuf+2, isize-2, wptr);
1216 + olen = isize + (PPP_HDRLEN / 2) + MPPE_OVHD;
1217 + (state->stats).inc_bytes += olen;
1218 + (state->stats).inc_packets++;
1219 + } else {
1220 + state->bits |= MPPE_BIT_COMP;
1221 + /* Hack warning !!! RC4 implementation which we use does
1222 + encryption "in place" - it means that input and output
1223 + buffers can be *the same* memory area. Therefore we don't
1224 + need to use a temporary buffer. But be careful - other
1225 + implementations don't have to be so nice.
1226 + I used to use ibuf as temporary buffer here, but it led
1227 + packet sniffers into error. Thanks to Wilfried Weissmann
1228 + for pointing that. */
1229 + arcfour_encrypt(&state->arcfour_context, wptr, complen, wptr);
1230 + olen = complen + PPP_HDRLEN + MPPE_OVHD;
1231 + (state->stats).comp_bytes += olen;
1232 + (state->stats).comp_packets++;
1233 + }
1234 + state->bits |= MPPE_BIT_ENCRYPTED;
1235 + }
1236 + }
1237 +
1238 + /* write status bits and coherency counter into the output buffer */
1239 + wptr = obuf + PPP_HDRLEN;
1240 + wptr[0] = MPPE_CTRLHI(state);
1241 + wptr[1] = MPPE_CTRLLO(state);
1242 +
1243 + state->bits = 0;
1244 +
1245 + (state->stats).unc_bytes += isize;
1246 + (state->stats).unc_packets++;
1247 +
1248 + return olen;
1249 +}
1250 +
1251 +/***************************/
1252 +/*** Decompression stuff ***/
1253 +/***************************/
1254 +static inline u32 getbits(const u8 *buf, const u32 n, u32 *i, u32 *l)
1255 +{
1256 + static u32 m[] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff};
1257 + u32 res, ol;
1258 +
1259 + ol = *l;
1260 + if (*l >= n) {
1261 + *l = (*l) - n;
1262 + res = (buf[*i] & m[ol]) >> (*l);
1263 + if (*l == 0) {
1264 + *l = 8;
1265 + (*i)++;
1266 + }
1267 + } else {
1268 + *l = 8 - n + (*l);
1269 + res = (buf[(*i)++] & m[ol]) << 8;
1270 + res = (res | buf[*i]) >> (*l);
1271 + }
1272 +
1273 + return res;
1274 +}
1275 +
1276 +static inline u32 getbyte(const u8 *buf, const u32 i, const u32 l)
1277 +{
1278 + if (l == 8) {
1279 + return buf[i];
1280 + } else {
1281 + return (((buf[i] << 8) | buf[i+1]) >> l) & 0xff;
1282 + }
1283 +}
1284 +
1285 +static inline void lamecopy(u8 *dst, u8 *src, u32 len)
1286 +{
1287 + while (len--)
1288 + *dst++ = *src++;
1289 +}
1290 +
1291 +static int
1292 +mppc_decompress(struct ppp_mppe_state *state, unsigned char *ibuf,
1293 + unsigned char *obuf, int isize, int osize)
1294 +{
1295 + u32 olen, off, len, bits, val, sig, i, l;
1296 + u8 *history, *s;
1297 +
1298 + history = state->hist + state->histptr;
1299 + olen = len = i = 0;
1300 + l = 8;
1301 + bits = isize * 8;
1302 + while (bits >= 8) {
1303 + val = getbyte(ibuf, i++, l);
1304 + if (val < 0x80) { /* literal byte < 0x80 */
1305 + if (state->histptr < 2*MPPE_HIST_LEN) {
1306 + /* copy uncompressed byte to the history */
1307 + (state->hist)[(state->histptr)++] = (u8) val;
1308 + } else {
1309 + /* buffer overflow; drop packet */
1310 + if (state->debug)
1311 + printk(KERN_ERR "%s%d: trying to write outside history "
1312 + "buffer\n", __FUNCTION__, state->unit);
1313 + return DECOMP_ERROR;
1314 + }
1315 + olen++;
1316 + bits -= 8;
1317 + continue;
1318 + }
1319 +
1320 + sig = val & 0xc0;
1321 + if (sig == 0x80) { /* literal byte >= 0x80 */
1322 + if (state->histptr < 2*MPPE_HIST_LEN) {
1323 + /* copy uncompressed byte to the history */
1324 + (state->hist)[(state->histptr)++] =
1325 + (u8) (0x80|((val&0x3f)<<1)|getbits(ibuf, 1 , &i ,&l));
1326 + } else {
1327 + /* buffer overflow; drop packet */
1328 + if (state->debug)
1329 + printk(KERN_ERR "%s%d: trying to write outside history "
1330 + "buffer\n", __FUNCTION__, state->unit);
1331 + return DECOMP_ERROR;
1332 + }
1333 + olen++;
1334 + bits -= 9;
1335 + continue;
1336 + }
1337 +
1338 + /* Not a literal byte so it must be an (offset,length) pair */
1339 + /* decode offset */
1340 + sig = val & 0xf0;
1341 + if (sig == 0xf0) { /* 10-bit offset; 0 <= offset < 64 */
1342 + off = (((val&0x0f)<<2)|getbits(ibuf, 2 , &i ,&l));
1343 + bits -= 10;
1344 + } else {
1345 + if (sig == 0xe0) { /* 12-bit offset; 64 <= offset < 320 */
1346 + off = ((((val&0x0f)<<4)|getbits(ibuf, 4 , &i ,&l))+64);
1347 + bits -= 12;
1348 + } else {
1349 + if ((sig&0xe0) == 0xc0) {/* 16-bit offset; 320 <= offset < 8192 */
1350 + off = ((((val&0x1f)<<8)|getbyte(ibuf, i++, l))+320);
1351 + bits -= 16;
1352 + if (off > MPPE_HIST_LEN - 1) {
1353 + if (state->debug)
1354 + printk(KERN_DEBUG "%s%d: too big offset value: %d\n",
1355 + __FUNCTION__, state->unit, off);
1356 + return DECOMP_ERROR;
1357 + }
1358 + } else { /* this shouldn't happen */
1359 + if (state->debug)
1360 + printk(KERN_DEBUG "%s%d: cannot decode offset value\n",
1361 + __FUNCTION__, state->unit);
1362 + return DECOMP_ERROR;
1363 + }
1364 + }
1365 + }
1366 + /* decode length of match */
1367 + val = getbyte(ibuf, i, l);
1368 + if ((val & 0x80) == 0x00) { /* len = 3 */
1369 + len = 3;
1370 + bits--;
1371 + getbits(ibuf, 1 , &i ,&l);
1372 + } else if ((val & 0xc0) == 0x80) { /* 4 <= len < 8 */
1373 + len = 0x04 | ((val>>4) & 0x03);
1374 + bits -= 4;
1375 + getbits(ibuf, 4 , &i ,&l);
1376 + } else if ((val & 0xe0) == 0xc0) { /* 8 <= len < 16 */
1377 + len = 0x08 | ((val>>2) & 0x07);
1378 + bits -= 6;
1379 + getbits(ibuf, 6 , &i ,&l);
1380 + } else if ((val & 0xf0) == 0xe0) { /* 16 <= len < 32 */
1381 + len = 0x10 | (val & 0x0f);
1382 + bits -= 8;
1383 + i++;
1384 + } else {
1385 + bits -= 8;
1386 + val = (val << 8) | getbyte(ibuf, ++i, l);
1387 + if ((val & 0xf800) == 0xf000) { /* 32 <= len < 64 */
1388 + len = 0x0020 | ((val >> 6) & 0x001f);
1389 + bits -= 2;
1390 + getbits(ibuf, 2 , &i ,&l);
1391 + } else if ((val & 0xfc00) == 0xf800) { /* 64 <= len < 128 */
1392 + len = 0x0040 | ((val >> 4) & 0x003f);
1393 + bits -= 4;
1394 + getbits(ibuf, 4 , &i ,&l);
1395 + } else if ((val & 0xfe00) == 0xfc00) { /* 128 <= len < 256 */
1396 + len = 0x0080 | ((val >> 2) & 0x007f);
1397 + bits -= 6;
1398 + getbits(ibuf, 6 , &i ,&l);
1399 + } else if ((val & 0xff00) == 0xfe00) { /* 256 <= len < 512 */
1400 + len = 0x0100 | (val & 0x00ff);
1401 + bits -= 8;
1402 + i++;
1403 + } else {
1404 + bits -= 8;
1405 + val = (val << 8) | getbyte(ibuf, ++i, l);
1406 + if ((val & 0xff8000) == 0xff0000) { /* 512 <= len < 1024 */
1407 + len = 0x000200 | ((val >> 6) & 0x0001ff);
1408 + bits -= 2;
1409 + getbits(ibuf, 2 , &i ,&l);
1410 + } else if ((val & 0xffc000) == 0xff8000) {/* 1024 <= len < 2048 */
1411 + len = 0x000400 | ((val >> 4) & 0x0003ff);
1412 + bits -= 4;
1413 + getbits(ibuf, 4 , &i ,&l);
1414 + } else if ((val & 0xffe000) == 0xffc000) {/* 2048 <= len < 4096 */
1415 + len = 0x000800 | ((val >> 2) & 0x0007ff);
1416 + bits -= 6;
1417 + getbits(ibuf, 6 , &i ,&l);
1418 + } else if ((val & 0xfff000) == 0xffe000) {/* 4096 <= len < 8192 */
1419 + len = 0x001000 | (val & 0x000fff);
1420 + bits -= 8;
1421 + i++;
1422 + } else { /* this shouldn't happen */
1423 + if (state->debug)
1424 + printk(KERN_DEBUG "%s%d: wrong length code: 0x%X\n",
1425 + __FUNCTION__, state->unit, val);
1426 + return DECOMP_ERROR;
1427 + }
1428 + }
1429 + }
1430 + s = state->hist + state->histptr;
1431 + state->histptr += len;
1432 + olen += len;
1433 + if (state->histptr < 2*MPPE_HIST_LEN) {
1434 + /* copy uncompressed bytes to the history */
1435 +
1436 + /* In some cases len may be greater than off. It means that memory
1437 + * areas pointed by s and s-off overlap. I used to use memmove()
1438 + * here, because I thought that it acts as libc's version. But
1439 + * I was wrong. I got strange errors sometimes. Wilfried suggested
1440 + * using of byte by byte copying here and strange errors disappeared.
1441 + */
1442 + lamecopy(s, s-off, len);
1443 + } else {
1444 + /* buffer overflow; drop packet */
1445 + if (state->debug)
1446 + printk(KERN_ERR "%s%d: trying to write outside history "
1447 + "buffer\n", __FUNCTION__, state->unit);
1448 + return DECOMP_ERROR;
1449 + }
1450 + }
1451 +
1452 + if (olen <= osize) {
1453 + /* copy uncompressed packet to the output buffer */
1454 + memcpy(obuf, history, olen);
1455 + } else {
1456 + /* buffer overflow; drop packet */
1457 + if (state->debug)
1458 + printk(KERN_ERR "%s%d: too big uncompressed packet: %d\n",
1459 + __FUNCTION__, state->unit, olen+(PPP_HDRLEN/2));
1460 + return DECOMP_ERROR;
1461 + }
1462 +
1463 + return (int) olen;
1464 +}
1465 +
1466 +int
1467 +mppe_decompress(void *arg, unsigned char *ibuf, int isize,
1468 + unsigned char *obuf, int osize)
1469 +{
1470 + struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
1471 + int seq, bits, uncomplen;
1472 +
1473 + if (isize <= PPP_HDRLEN + MPPE_OVHD) {
1474 + if (state->debug) {
1475 + printk(KERN_DEBUG "%s%d: short packet (len=%d)\n", __FUNCTION__,
1476 + state->unit, isize);
1477 + }
1478 + return DECOMP_ERROR;
1479 + }
1480 +
1481 + /* Get coherency counter and control bits from input buffer */
1482 + seq = MPPE_CCOUNT(ibuf);
1483 + bits = MPPE_BITS(ibuf);
1484 +
1485 + if (state->stateless) {
1486 + /* RFC 3078, sec 8.1. */
1487 + mppe_increase_ccount(state);
1488 + if ((seq != state->ccount) && state->debug)
1489 + printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n",
1490 + __FUNCTION__, state->unit, seq, state->ccount);
1491 + while (seq != state->ccount)
1492 + mppe_increase_ccount(state);
1493 + } else {
1494 + /* RFC 3078, sec 8.2. */
1495 + if (state->flushexpected) { /* discard state */
1496 + if ((bits & MPPE_BIT_FLUSHED)) { /* we received expected FLUSH bit */
1497 + while (seq != state->ccount)
1498 + mppe_increase_ccount(state);
1499 + state->flushexpected = 0;
1500 + } else /* drop packet*/
1501 + return DECOMP_ERROR;
1502 + } else { /* normal state */
1503 + mppe_increase_ccount(state);
1504 + if (seq != state->ccount) {
1505 + /* Packet loss detected, enter the discard state. */
1506 + if (state->debug)
1507 + printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n",
1508 + __FUNCTION__, state->unit, seq, state->ccount);
1509 + state->flushexpected = 1;
1510 + return DECOMP_ERROR;
1511 + }
1512 + }
1513 + if (state->mppe && (bits & MPPE_BIT_FLUSHED)) {
1514 + arcfour_setkey(&state->arcfour_context, state->session_key,
1515 + state->keylen);
1516 + }
1517 + }
1518 +
1519 + if (state->mppc && (bits & (MPPE_BIT_FLUSHED | MPPE_BIT_RESET))) {
1520 + state->histptr = MPPE_HIST_LEN;
1521 + if ((bits & MPPE_BIT_FLUSHED)) {
1522 + memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8));
1523 + } else
1524 + if ((bits & MPPE_BIT_RESET)) {
1525 + memcpy(state->hist, state->hist+MPPE_HIST_LEN, MPPE_HIST_LEN);
1526 + }
1527 + }
1528 +
1529 + /* Fill in the first part of the PPP header. The protocol field
1530 + comes from the decompressed data. */
1531 + obuf[0] = PPP_ADDRESS(ibuf);
1532 + obuf[1] = PPP_CONTROL(ibuf);
1533 + obuf += PPP_HDRLEN / 2;
1534 +
1535 + if (state->mppe) { /* process encrypted packet */
1536 + if ((bits & MPPE_BIT_ENCRYPTED)) {
1537 + /* OK, packet encrypted, so decrypt it */
1538 + if (state->mppc && (bits & MPPE_BIT_COMP)) {
1539 + /* Hack warning !!! RC4 implementation which we use does
1540 + decryption "in place" - it means that input and output
1541 + buffers can be *the same* memory area. Therefore we don't
1542 + need to use a temporary buffer. But be careful - other
1543 + implementations don't have to be so nice. */
1544 + arcfour_decrypt(&state->arcfour_context, ibuf+PPP_HDRLEN+MPPE_OVHD,
1545 + isize-PPP_HDRLEN-MPPE_OVHD, ibuf+PPP_HDRLEN+MPPE_OVHD);
1546 + uncomplen = mppc_decompress(state, ibuf+PPP_HDRLEN+MPPE_OVHD,
1547 + obuf, isize-PPP_HDRLEN-MPPE_OVHD,
1548 + osize-(PPP_HDRLEN/2));
1549 + if (uncomplen == DECOMP_ERROR) {
1550 + state->flushexpected = 1;
1551 + return DECOMP_ERROR;
1552 + }
1553 + uncomplen += PPP_HDRLEN / 2;
1554 + (state->stats).comp_bytes += isize;
1555 + (state->stats).comp_packets++;
1556 + } else {
1557 + arcfour_decrypt(&state->arcfour_context, ibuf+PPP_HDRLEN+MPPE_OVHD,
1558 + isize-PPP_HDRLEN-MPPE_OVHD, obuf);
1559 + uncomplen = isize - (PPP_HDRLEN / 2) - MPPE_OVHD;
1560 + (state->stats).inc_bytes += isize;
1561 + (state->stats).inc_packets++;
1562 + }
1563 + } else { /* this shouldn't happen */
1564 + if (state->debug)
1565 + printk(KERN_ERR "%s%d: encryption negotiated but not an "
1566 + "encrypted packet received\n", __FUNCTION__, state->unit);
1567 + mppe_change_key(state, 0);
1568 + state->flushexpected = 1;
1569 + return DECOMP_ERROR;
1570 + }
1571 + } else {
1572 + if (state->mppc) { /* no MPPE, only MPPC */
1573 + if ((bits & MPPE_BIT_COMP)) {
1574 + uncomplen = mppc_decompress(state, ibuf+PPP_HDRLEN+MPPE_OVHD,
1575 + obuf, isize-PPP_HDRLEN-MPPE_OVHD,
1576 + osize-(PPP_HDRLEN/2));
1577 + if (uncomplen == DECOMP_ERROR) {
1578 + state->flushexpected = 1;
1579 + return DECOMP_ERROR;
1580 + }
1581 + uncomplen += PPP_HDRLEN / 2;
1582 + (state->stats).comp_bytes += isize;
1583 + (state->stats).comp_packets++;
1584 + } else {
1585 + memcpy(obuf, ibuf+PPP_HDRLEN+MPPE_OVHD,
1586 + isize-PPP_HDRLEN-MPPE_OVHD);
1587 + uncomplen = isize - (PPP_HDRLEN / 2) - MPPE_OVHD;
1588 + (state->stats).inc_bytes += isize;
1589 + (state->stats).inc_packets++;
1590 + }
1591 + } else { /* this shouldn't happen */
1592 + if (state->debug)
1593 + printk(KERN_ERR "%s%d: error - no MPPC nor MPPE negotiated\n",
1594 + __FUNCTION__, state->unit);
1595 + state->flushexpected = 1;
1596 + return DECOMP_ERROR;
1597 + }
1598 + }
1599 +
1600 + (state->stats).unc_bytes += uncomplen;
1601 + (state->stats).unc_packets++;
1602 +
1603 + return uncomplen;
1604 +}
1605 +
1606 +
1607 +/************************************************************
1608 + * Module interface table
1609 + ************************************************************/
1610 +
1611 +/* These are in ppp_generic.c */
1612 +extern int ppp_register_compressor (struct compressor *cp);
1613 +extern void ppp_unregister_compressor (struct compressor *cp);
1614 +
1615 +/*
1616 + * Functions exported to ppp_generic.c.
1617 + */
1618 +struct compressor ppp_mppe = {
1619 + CI_MPPE, /* compress_proto */
1620 + mppe_comp_alloc, /* comp_alloc */
1621 + mppe_comp_free, /* comp_free */
1622 + mppe_comp_init, /* comp_init */
1623 + mppe_comp_reset, /* comp_reset */
1624 + mppe_compress, /* compress */
1625 + mppe_stats, /* comp_stat */
1626 + mppe_decomp_alloc, /* decomp_alloc */
1627 + mppe_comp_free, /* decomp_free */
1628 + mppe_decomp_init, /* decomp_init */
1629 + mppe_decomp_reset, /* decomp_reset */
1630 + mppe_decompress, /* decompress */
1631 + NULL, /* incomp */
1632 + mppe_stats, /* decomp_stat */
1633 +};
1634 +
1635 +/*
1636 + In case of MPPC/MPPE there is no need to process incompressible data
1637 + because such a data is sent in MPPC/MPPE frame. Therefore the (*incomp)
1638 + callback function isn't needed.
1639 +*/
1640 +
1641 +/************************************************************
1642 + * Module support routines
1643 + ************************************************************/
1644 +
1645 +int __init mppe_module_init(void)
1646 +{
1647 + int answer = ppp_register_compressor(&ppp_mppe);
1648 + if (answer == 0) {
1649 + printk(KERN_INFO "MPPE/MPPC encryption/compression module registered\n");
1650 + }
1651 + return answer;
1652 +}
1653 +
1654 +void __exit mppe_module_cleanup(void)
1655 +{
1656 + if (MOD_IN_USE) {
1657 + printk (KERN_INFO "MPPE/MPPC module busy, removing delayed\n");
1658 + } else {
1659 + ppp_unregister_compressor (&ppp_mppe);
1660 + printk(KERN_INFO "MPPE/MPPC encryption/compression module unregistered\n");
1661 + }
1662 +}
1663 +
1664 +module_init(mppe_module_init);
1665 +module_exit(mppe_module_cleanup);
1666 +
1667 +MODULE_AUTHOR("Jan Dubiec <jdx@slackware.pl>");
1668 +MODULE_DESCRIPTION("MPPE/MPPC encryption/compression module for Linux");
1669 +MODULE_LICENSE("Dual BSD/GPL");
1670 diff -ruN linux-2.4.21.orig/include/linux/ppp-comp.h linux-2.4.21/include/linux/ppp-comp.h
1671 --- linux-2.4.21.orig/include/linux/ppp-comp.h 1999-08-06 19:44:11.000000000 +0200
1672 +++ linux-2.4.21/include/linux/ppp-comp.h 2003-07-15 01:45:22.000000000 +0200
1673 @@ -1,34 +1,42 @@
1674 /*
1675 * ppp-comp.h - Definitions for doing PPP packet compression.
1676 *
1677 - * Copyright (c) 1994 The Australian National University.
1678 - * All rights reserved.
1679 + * Copyright (c) 1984 Paul Mackerras. All rights reserved.
1680 *
1681 - * Permission to use, copy, modify, and distribute this software and its
1682 - * documentation is hereby granted, provided that the above copyright
1683 - * notice appears in all copies. This software is provided without any
1684 - * warranty, express or implied. The Australian National University
1685 - * makes no representations about the suitability of this software for
1686 - * any purpose.
1687 - *
1688 - * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
1689 - * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
1690 - * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
1691 - * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
1692 - * OF SUCH DAMAGE.
1693 - *
1694 - * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
1695 - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
1696 - * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
1697 - * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
1698 - * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
1699 - * OR MODIFICATIONS.
1700 + * Redistribution and use in source and binary forms, with or without
1701 + * modification, are permitted provided that the following conditions
1702 + * are met:
1703 *
1704 - * $Id: ppp-comp.h,v 1.6 1997/11/27 06:04:44 paulus Exp $
1705 + * 1. Redistributions of source code must retain the above copyright
1706 + * notice, this list of conditions and the following disclaimer.
1707 + *
1708 + * 2. Redistributions in binary form must reproduce the above copyright
1709 + * notice, this list of conditions and the following disclaimer in
1710 + * the documentation and/or other materials provided with the
1711 + * distribution.
1712 + *
1713 + * 3. The name(s) of the authors of this software must not be used to
1714 + * endorse or promote products derived from this software without
1715 + * prior written permission.
1716 + *
1717 + * 4. Redistributions of any form whatsoever must retain the following
1718 + * acknowledgment:
1719 + * "This product includes software developed by Paul Mackerras
1720 + * <paulus@samba.org>".
1721 + *
1722 + * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
1723 + * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
1724 + * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
1725 + * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
1726 + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
1727 + * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
1728 + * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
1729 + *
1730 + * $Id: ppp-comp.h,v 1.10 2002/12/06 09:49:15 paulus Exp $
1731 */
1732
1733 /*
1734 - * ==FILEVERSION 980319==
1735 + * ==FILEVERSION 20020715==
1736 *
1737 * NOTE TO MAINTAINERS:
1738 * If you modify this file at all, please set the above date.
1739 @@ -78,7 +86,7 @@
1740
1741 /* Compress a packet */
1742 int (*compress) (void *state, unsigned char *rptr,
1743 - unsigned char *obuf, int isize, int osize);
1744 + unsigned char *obuf, int isize, int osize);
1745
1746 /* Return compression statistics */
1747 void (*comp_stat) (void *state, struct compstat *stats);
1748 @@ -99,7 +107,7 @@
1749
1750 /* Decompress a packet. */
1751 int (*decompress) (void *state, unsigned char *ibuf, int isize,
1752 - unsigned char *obuf, int osize);
1753 + unsigned char *obuf, int osize);
1754
1755 /* Update state for an incompressible packet received */
1756 void (*incomp) (void *state, unsigned char *ibuf, int icnt);
1757 @@ -187,6 +195,127 @@
1758 #define DEFLATE_CHK_SEQUENCE 0
1759
1760 /*
1761 + * Definitions for MPPE.
1762 + */
1763 +
1764 +#define CI_MPPE 18 /* config option for MPPE */
1765 +#define CILEN_MPPE 6 /* length of config option */
1766 +
1767 +#define MPPE_PAD 4 /* MPPE growth per frame */
1768 +#define MPPE_MAX_KEY_LEN 16 /* largest key length (128-bit) */
1769 +
1770 +/* option bits for ccp_options.mppe */
1771 +#define MPPE_OPT_40 0x01 /* 40 bit */
1772 +#define MPPE_OPT_128 0x02 /* 128 bit */
1773 +#define MPPE_OPT_STATEFUL 0x04 /* stateful mode */
1774 +/* unsupported opts */
1775 +#define MPPE_OPT_56 0x08 /* 56 bit */
1776 +#define MPPE_OPT_MPPC 0x10 /* MPPC compression */
1777 +#define MPPE_OPT_D 0x20 /* Unknown */
1778 +#define MPPE_OPT_UNSUPPORTED (MPPE_OPT_56|MPPE_OPT_MPPC|MPPE_OPT_D)
1779 +#define MPPE_OPT_UNKNOWN 0x40 /* Bits !defined in RFC 3078 were set */
1780 +
1781 +/*
1782 + * This is not nice ... the alternative is a bitfield struct though.
1783 + * And unfortunately, we cannot share the same bits for the option
1784 + * names above since C and H are the same bit. We could do a u_int32
1785 + * but then we have to do a htonl() all the time and/or we still need
1786 + * to know which octet is which.
1787 + */
1788 +#define MPPE_C_BIT 0x01 /* MPPC */
1789 +#define MPPE_D_BIT 0x10 /* Obsolete, usage unknown */
1790 +#define MPPE_L_BIT 0x20 /* 40-bit */
1791 +#define MPPE_S_BIT 0x40 /* 128-bit */
1792 +#define MPPE_M_BIT 0x80 /* 56-bit, not supported */
1793 +#define MPPE_H_BIT 0x01 /* Stateless (in a different byte) */
1794 +
1795 +/* Does not include H bit; used for least significant octet only. */
1796 +#define MPPE_ALL_BITS (MPPE_D_BIT|MPPE_L_BIT|MPPE_S_BIT|MPPE_M_BIT|MPPE_H_BIT)
1797 +
1798 +/* Build a CI from mppe opts (see RFC 3078) */
1799 +#define MPPE_OPTS_TO_CI(opts, ci) \
1800 + do { \
1801 + u_char *ptr = ci; /* u_char[4] */ \
1802 + \
1803 + /* H bit */ \
1804 + if (opts & MPPE_OPT_STATEFUL) \
1805 + *ptr++ = 0x0; \
1806 + else \
1807 + *ptr++ = MPPE_H_BIT; \
1808 + *ptr++ = 0; \
1809 + *ptr++ = 0; \
1810 + \
1811 + /* S,L bits */ \
1812 + *ptr = 0; \
1813 + if (opts & MPPE_OPT_128) \
1814 + *ptr |= MPPE_S_BIT; \
1815 + if (opts & MPPE_OPT_40) \
1816 + *ptr |= MPPE_L_BIT; \
1817 + /* M,D,C bits not supported */ \
1818 + } while (/* CONSTCOND */ 0)
1819 +
1820 +/* The reverse of the above */
1821 +#define MPPE_CI_TO_OPTS(ci, opts) \
1822 + do { \
1823 + u_char *ptr = ci; /* u_char[4] */ \
1824 + \
1825 + opts = 0; \
1826 + \
1827 + /* H bit */ \
1828 + if (!(ptr[0] & MPPE_H_BIT)) \
1829 + opts |= MPPE_OPT_STATEFUL; \
1830 + \
1831 + /* S,L bits */ \
1832 + if (ptr[3] & MPPE_S_BIT) \
1833 + opts |= MPPE_OPT_128; \
1834 + if (ptr[3] & MPPE_L_BIT) \
1835 + opts |= MPPE_OPT_40; \
1836 + \
1837 + /* M,D,C bits */ \
1838 + if (ptr[3] & MPPE_M_BIT) \
1839 + opts |= MPPE_OPT_56; \
1840 + if (ptr[3] & MPPE_D_BIT) \
1841 + opts |= MPPE_OPT_D; \
1842 + if (ptr[3] & MPPE_C_BIT) \
1843 + opts |= MPPE_OPT_MPPC; \
1844 + \
1845 + /* Other bits */ \
1846 + if (ptr[0] & ~MPPE_H_BIT) \
1847 + opts |= MPPE_OPT_UNKNOWN; \
1848 + if (ptr[1] || ptr[2]) \
1849 + opts |= MPPE_OPT_UNKNOWN; \
1850 + if (ptr[3] & ~MPPE_ALL_BITS) \
1851 + opts |= MPPE_OPT_UNKNOWN; \
1852 + } while (/* CONSTCOND */ 0)
1853 +
1854 +/* MPPE/MPPC definitions by J.D.*/
1855 +#define MPPE_STATELESS MPPE_H_BIT /* configuration bit H */
1856 +#define MPPE_40BIT MPPE_L_BIT /* configuration bit L */
1857 +#define MPPE_56BIT MPPE_M_BIT /* configuration bit M */
1858 +#define MPPE_128BIT MPPE_S_BIT /* configuration bit S */
1859 +#define MPPE_MPPC MPPE_C_BIT /* configuration bit C */
1860 +
1861 +/*
1862 + * Definitions for Stac LZS.
1863 + */
1864 +
1865 +#define CI_LZS 17 /* config option for Stac LZS */
1866 +#define CILEN_LZS 5 /* length of config option */
1867 +
1868 +#define LZS_OVHD 4 /* max. LZS overhead */
1869 +#define LZS_HIST_LEN 2048 /* LZS history size */
1870 +#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */
1871 +
1872 +#define LZS_MODE_NONE 0
1873 +#define LZS_MODE_LCB 1
1874 +#define LZS_MODE_CRC 2
1875 +#define LZS_MODE_SEQ 3
1876 +#define LZS_MODE_EXT 4
1877 +
1878 +#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */
1879 +#define LZS_EXT_BIT_COMP 0x20 /* bit C */
1880 +
1881 +/*
1882 * Definitions for other, as yet unsupported, compression methods.
1883 */
1884
Personal OpenWRT clone
This page took 0.188278 seconds and 5 git commands to generate.