target/linux/at91/patches-2.6.25/008-fdl-serial.patch

   1 --- a/drivers/serial/atmel_serial.c
   2 +++ b/drivers/serial/atmel_serial.c
   3 @@ -214,6 +214,34 @@
   4                                 at91_set_gpio_value(AT91_PIN_PA21, 0);
   5                         else
   6                                 at91_set_gpio_value(AT91_PIN_PA21, 1);
   7 +
   8 +                       /*
   9 +                        * FDL VersaLink adds GPIOS to provide full modem
  10 +                        * control on USART 0 - Drive DTR and RI pins manually
  11 +                        */
  12 +                       if (mctrl & TIOCM_DTR)
  13 +                               at91_set_gpio_value(AT91_PIN_PB6, 0);
  14 +                       else
  15 +                               at91_set_gpio_value(AT91_PIN_PB6, 1);
  16 +                       if (mctrl & TIOCM_RI)
  17 +                               at91_set_gpio_value(AT91_PIN_PB7, 0);
  18 +                       else
  19 +                               at91_set_gpio_value(AT91_PIN_PB7, 1);
  20 +               }
  21 +
  22 +               /*
  23 +                * FDL VersaLink adds GPIOS to provide full modem control on
  24 +                * USART 3 - Drive DTR and RI pins manually
  25 +                */
  26 +               if (port->mapbase == AT91RM9200_BASE_US3) {
  27 +                       if (mctrl & TIOCM_DTR)
  28 +                               at91_set_gpio_value(AT91_PIN_PB29, 0);
  29 +                       else
  30 +                               at91_set_gpio_value(AT91_PIN_PB29, 1);
  31 +                       if (mctrl & TIOCM_RI)
  32 +                               at91_set_gpio_value(AT91_PIN_PB2, 0);
  33 +                       else
  34 +                               at91_set_gpio_value(AT91_PIN_PB2, 1);
  35                 }
  36         }
  37  #endif
  38 @@ -251,8 +279,10 @@
  39         /*
  40          * The control signals are active low.
  41          */
  42 -       if (!(status & ATMEL_US_DCD))
  43 -               ret |= TIOCM_CD;
  44 +
  45 +       if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
  46 +               if (!(status & ATMEL_US_DCD))
  47 +                       ret |= TIOCM_CD;
  48         if (!(status & ATMEL_US_CTS))
  49                 ret |= TIOCM_CTS;
  50         if (!(status & ATMEL_US_DSR))
  51 @@ -260,6 +290,16 @@
  52         if (!(status & ATMEL_US_RI))
  53                 ret |= TIOCM_RI;
  54
  55 +       /*
  56 +        * Read the GPIO's for the FDL VersaLink special case
  57 +        */
  58 +       if (port->mapbase == AT91RM9200_BASE_US0)
  59 +               if (!(at91_get_gpio_value(AT91_PIN_PA19)))
  60 +                       ret |= TIOCM_CD;
  61 +       if (port->mapbase == AT91RM9200_BASE_US3)
  62 +               if (!(at91_get_gpio_value(AT91_PIN_PA24)))
  63 +                       ret |= TIOCM_CD;
  64 +
  65         return ret;
  66  }
  67
  68 @@ -453,6 +493,34 @@
  69  }
  70
  71  /*
  72 + * USART0 DCD Interrupt handler
  73 + */
  74 +
  75 +static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
  76 +{
  77 +       struct uart_port *port = dev_id;
  78 +       int status = at91_get_gpio_value(irq);
  79 +
  80 +       uart_handle_dcd_change(port, !(status));
  81 +
  82 +       return IRQ_HANDLED;
  83 +}
  84 +
  85 +/*
  86 + * USART3 DCD Interrupt handler
  87 + */
  88 +
  89 +static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
  90 +{
  91 +       struct uart_port *port = dev_id;
  92 +       int status = at91_get_gpio_value(irq);
  93 +
  94 +       uart_handle_dcd_change(port, !(status));
  95 +
  96 +       return IRQ_HANDLED;
  97 +}
  98 +
  99 +/*
 100   * receive interrupt handler.
 101   */
 102  static void
 103 @@ -815,6 +883,23 @@
 104                 return retval;
 105         }
 106
 107 +        if (port->mapbase == AT91RM9200_BASE_US0) {
 108 +                retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port);
 109 +                if (retval) {
 110 +                        printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n");
 111 +                        free_irq(port->irq, port);
 112 +                        return retval;
 113 +                }
 114 +        }
 115 +        if (port->mapbase == AT91RM9200_BASE_US3) {
 116 +                retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port);
 117 +                if (retval) {
 118 +                        printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n");
 119 +                        free_irq(port->irq, port);
 120 +                        return retval;
 121 +                }
 122 +        }
 123 +
 124         /*
 125          * Initialize DMA (if necessary)
 126          */
 127 @@ -834,6 +919,10 @@
 128                                         kfree(atmel_port->pdc_rx[0].buf);
 129                                 }
 130                                 free_irq(port->irq, port);
 131 +                               if (port->mapbase == AT91RM9200_BASE_US0)
 132 +                                       free_irq(AT91_PIN_PA19, port);
 133 +                               if (port->mapbase == AT91RM9200_BASE_US3)
 134 +                                       free_irq(AT91_PIN_PA24, port);
 135                                 return -ENOMEM;
 136                         }
 137                         pdc->dma_addr = dma_map_single(port->dev,
 138 @@ -873,7 +962,11 @@
 139                 retval = atmel_open_hook(port);
 140                 if (retval) {
 141                         free_irq(port->irq, port);
 142 -                       return retval;
 143 +                       if (port->mapbase == AT91RM9200_BASE_US0)
 144 +                               free_irq(AT91_PIN_PA19, port);
 145 +                       if (port->mapbase == AT91RM9200_BASE_US3)
 146 +                               free_irq(AT91_PIN_PA24, port);
 147 +                       return retval;
 148                 }
 149         }
 150
 151 @@ -947,6 +1040,10 @@
 152          * Free the interrupt
 153          */
 154         free_irq(port->irq, port);
 155 +       if (port->mapbase == AT91RM9200_BASE_US0)
 156 +               free_irq(AT91_PIN_PA19, port);
 157 +       if (port->mapbase == AT91RM9200_BASE_US3)
 158 +               free_irq(AT91_PIN_PA24, port);
 159
 160         /*
 161          * If there is a specific "close" function (to unregister