target/linux/orion/patches/016-add_qnap_ts-409_support.patch

   1 From: Sylver Bruneau <sylver.bruneau@googlemail.com>
   2
   3 Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
   4 ---
   5  arch/arm/mach-orion5x/Kconfig       |    6 +
   6  arch/arm/mach-orion5x/Makefile      |    1 +
   7  arch/arm/mach-orion5x/ts409-setup.c |  383 +++++++++++++++++++++++++++++++++++
   8  3 files changed, 390 insertions(+), 0 deletions(-)
   9  create mode 100644 arch/arm/mach-orion5x/ts409-setup.c
  10
  11 --- a/arch/arm/mach-orion5x/Kconfig
  12 +++ b/arch/arm/mach-orion5x/Kconfig
  13 @@ -44,6 +44,12 @@
  14           Buffalo Linkstation Pro/Live platform. Both v1 and
  15           v2 devices are supported.
  16
  17 +config MACH_TS409
  18 +       bool "QNAP TS-409"
  19 +       help
  20 +         Say 'Y' here if you want your kernel to support the
  21 +         QNAP TS-409 platform.
  22 +
  23  endmenu
  24
  25  endif
  26 --- a/arch/arm/mach-orion5x/Makefile
  27 +++ b/arch/arm/mach-orion5x/Makefile
  28 @@ -5,3 +5,4 @@
  29  obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
  30  obj-$(CONFIG_MACH_DNS323)      += dns323-setup.o
  31  obj-$(CONFIG_MACH_TS209)       += ts209-setup.o
  32 +obj-$(CONFIG_MACH_TS409)       += ts409-setup.o
  33 --- /dev/null
  34 +++ b/arch/arm/mach-orion5x/ts409-setup.c
  35 @@ -0,0 +1,383 @@
  36 +/*
  37 + * QNAP TS-409 Board Setup
  38 + *
  39 + * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
  40 + *
  41 + * This program is free software; you can redistribute it and/or
  42 + * modify it under the terms of the GNU General Public License
  43 + * as published by the Free Software Foundation; either version
  44 + * 2 of the License, or (at your option) any later version.
  45 + */
  46 +
  47 +#include <linux/kernel.h>
  48 +#include <linux/init.h>
  49 +#include <linux/platform_device.h>
  50 +#include <linux/pci.h>
  51 +#include <linux/irq.h>
  52 +#include <linux/mtd/physmap.h>
  53 +#include <linux/mv643xx_eth.h>
  54 +#include <linux/gpio_keys.h>
  55 +#include <linux/input.h>
  56 +#include <linux/i2c.h>
  57 +#include <linux/serial_reg.h>
  58 +#include <asm/mach-types.h>
  59 +#include <asm/gpio.h>
  60 +#include <asm/mach/arch.h>
  61 +#include <asm/mach/pci.h>
  62 +#include <asm/arch/orion5x.h>
  63 +#include "common.h"
  64 +#include "mpp.h"
  65 +
  66 +/*****************************************************************************
  67 + * QNAP TS-409 Info
  68 + ****************************************************************************/
  69 +
  70 +/*
  71 + * QNAP TS-409 hardware :
  72 + * - Marvell 88F5281-D0
  73 + * - Marvell 88SX7042 SATA controller (PCIe)
  74 + * - Marvell 88E1118 Gigabit Ethernet PHY
  75 + * - RTC S35390A (@0x30) on I2C bus
  76 + * - 8MB NOR flash
  77 + * - 256MB of DDR-2 RAM
  78 + */
  79 +
  80 +/*
  81 + * 8MB NOR flash Device bus boot chip select
  82 + */
  83 +
  84 +#define QNAP_TS409_NOR_BOOT_BASE 0xff800000
  85 +#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M
  86 +
  87 +/****************************************************************************
  88 + * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
  89 + *     partitions on the device because we want to keep compatability with
  90 + *     existing QNAP firmware.
  91 + *
  92 + * Layout as used by QNAP:
  93 + *  [2] 0x00000000-0x00200000 : "Kernel"
  94 + *  [3] 0x00200000-0x00600000 : "RootFS1"
  95 + *  [4] 0x00600000-0x00700000 : "RootFS2"
  96 + *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
  97 + *  [5] 0x00760000-0x00780000 : "U-Boot Config"
  98 + *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
  99 + ***************************************************************************/
 100 +static struct mtd_partition qnap_ts409_partitions[] = {
 101 +       {
 102 +               .name           = "U-Boot",
 103 +               .size           = 0x00080000,
 104 +               .offset         = 0x00780000,
 105 +               .mask_flags     = MTD_WRITEABLE,
 106 +       }, {
 107 +               .name           = "Kernel",
 108 +               .size           = 0x00200000,
 109 +               .offset         = 0,
 110 +       }, {
 111 +               .name           = "RootFS1",
 112 +               .size           = 0x00400000,
 113 +               .offset         = 0x00200000,
 114 +       }, {
 115 +               .name           = "RootFS2",
 116 +               .size           = 0x00100000,
 117 +               .offset         = 0x00600000,
 118 +       }, {
 119 +               .name           = "U-Boot Config",
 120 +               .size           = 0x00020000,
 121 +               .offset         = 0x00760000,
 122 +       }, {
 123 +               .name           = "NAS Config",
 124 +               .size           = 0x00060000,
 125 +               .offset         = 0x00700000,
 126 +               .mask_flags     = MTD_WRITEABLE,
 127 +       },
 128 +};
 129 +
 130 +static struct physmap_flash_data qnap_ts409_nor_flash_data = {
 131 +       .width          = 1,
 132 +       .parts          = qnap_ts409_partitions,
 133 +       .nr_parts       = ARRAY_SIZE(qnap_ts409_partitions)
 134 +};
 135 +
 136 +static struct resource qnap_ts409_nor_flash_resource = {
 137 +       .flags  = IORESOURCE_MEM,
 138 +       .start  = QNAP_TS409_NOR_BOOT_BASE,
 139 +       .end    = QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1,
 140 +};
 141 +
 142 +static struct platform_device qnap_ts409_nor_flash = {
 143 +       .name           = "physmap-flash",
 144 +       .id             = 0,
 145 +       .dev            = { .platform_data = &qnap_ts409_nor_flash_data, },
 146 +       .num_resources  = 1,
 147 +       .resource       = &qnap_ts409_nor_flash_resource,
 148 +};
 149 +
 150 +/*****************************************************************************
 151 + * PCI
 152 + ****************************************************************************/
 153 +
 154 +static int __init qnap_ts409_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 155 +{
 156 +       int irq;
 157 +
 158 +       /*
 159 +        * Check for devices with hard-wired IRQs.
 160 +        */
 161 +       irq = orion5x_pci_map_irq(dev, slot, pin);
 162 +       if (irq != -1)
 163 +               return irq;
 164 +
 165 +       /*
 166 +        * PCI isn't used on the TS-409
 167 +        */
 168 +       printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
 169 +       return -1;
 170 +}
 171 +
 172 +static struct hw_pci qnap_ts409_pci __initdata = {
 173 +       .nr_controllers = 2,
 174 +       .swizzle        = pci_std_swizzle,
 175 +       .setup          = orion5x_pci_sys_setup,
 176 +       .scan           = orion5x_pci_sys_scan_bus,
 177 +       .map_irq        = qnap_ts409_pci_map_irq,
 178 +};
 179 +
 180 +static int __init qnap_ts409_pci_init(void)
 181 +{
 182 +       if (machine_is_ts409())
 183 +               pci_common_init(&qnap_ts409_pci);
 184 +
 185 +       return 0;
 186 +}
 187 +
 188 +subsys_initcall(qnap_ts409_pci_init);
 189 +
 190 +/*****************************************************************************
 191 + * Ethernet
 192 + ****************************************************************************/
 193 +
 194 +static struct mv643xx_eth_platform_data qnap_ts409_eth_data = {
 195 +       .phy_addr       = 8,
 196 +};
 197 +
 198 +static int __init parse_hex_nibble(char n)
 199 +{
 200 +       if (n >= '0' && n <= '9')
 201 +               return n - '0';
 202 +
 203 +       if (n >= 'A' && n <= 'F')
 204 +               return n - 'A' + 10;
 205 +
 206 +       if (n >= 'a' && n <= 'f')
 207 +               return n - 'a' + 10;
 208 +
 209 +       return -1;
 210 +}
 211 +
 212 +static int __init parse_hex_byte(const char *b)
 213 +{
 214 +       int hi;
 215 +       int lo;
 216 +
 217 +       hi = parse_hex_nibble(b[0]);
 218 +       lo = parse_hex_nibble(b[1]);
 219 +
 220 +       if (hi < 0 || lo < 0)
 221 +               return -1;
 222 +
 223 +       return (hi << 4) | lo;
 224 +}
 225 +
 226 +static int __init check_mac_addr(const char *addr_str)
 227 +{
 228 +       u_int8_t addr[6];
 229 +       int i;
 230 +
 231 +       for (i = 0; i < 6; i++) {
 232 +               int byte;
 233 +
 234 +               /*
 235 +                * Enforce "xx:xx:xx:xx:xx:xx\n" format.
 236 +                */
 237 +               if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
 238 +                       return -1;
 239 +
 240 +               byte = parse_hex_byte(addr_str + (i * 3));
 241 +               if (byte < 0)
 242 +                       return -1;
 243 +               addr[i] = byte;
 244 +       }
 245 +
 246 +       printk(KERN_INFO "ts409: found ethernet mac address ");
 247 +       for (i = 0; i < 6; i++)
 248 +               printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
 249 +
 250 +       memcpy(qnap_ts409_eth_data.mac_addr, addr, 6);
 251 +
 252 +       return 0;
 253 +}
 254 +
 255 +/*
 256 + * The 'NAS Config' flash partition has an ext2 filesystem which
 257 + * contains a file that has the ethernet MAC address in plain text
 258 + * (format "xx:xx:xx:xx:xx:xx\n".)
 259 + */
 260 +static void __init ts409_find_mac_addr(void)
 261 +{
 262 +       unsigned long addr;
 263 +
 264 +       for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
 265 +               char *nor_page;
 266 +               int ret = 0;
 267 +
 268 +               nor_page = ioremap(QNAP_TS409_NOR_BOOT_BASE + addr, 1024);
 269 +               if (nor_page != NULL) {
 270 +                       ret = check_mac_addr(nor_page);
 271 +                       iounmap(nor_page);
 272 +               }
 273 +
 274 +               if (ret == 0)
 275 +                       break;
 276 +       }
 277 +}
 278 +
 279 +/*****************************************************************************
 280 + * RTC S35390A on I2C bus
 281 + ****************************************************************************/
 282 +
 283 +#define TS409_RTC_GPIO 10
 284 +
 285 +static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
 286 +       I2C_BOARD_INFO("s35390a", 0x30),
 287 +       .irq            = 0,
 288 +};
 289 +
 290 +/****************************************************************************
 291 + * GPIO Attached Keys
 292 + *     Power button is attached to the PIC microcontroller
 293 + ****************************************************************************/
 294 +
 295 +#define QNAP_TS409_GPIO_KEY_MEDIA      15
 296 +
 297 +static struct gpio_keys_button qnap_ts409_buttons[] = {
 298 +       {
 299 +               .code           = KEY_RESTART,
 300 +               .gpio           = QNAP_TS409_GPIO_KEY_MEDIA,
 301 +               .desc           = "USB Copy Button",
 302 +               .active_low     = 1,
 303 +       },
 304 +};
 305 +
 306 +static struct gpio_keys_platform_data qnap_ts409_button_data = {
 307 +       .buttons        = qnap_ts409_buttons,
 308 +       .nbuttons       = ARRAY_SIZE(qnap_ts409_buttons),
 309 +};
 310 +
 311 +static struct platform_device qnap_ts409_button_device = {
 312 +       .name           = "gpio-keys",
 313 +       .id             = -1,
 314 +       .num_resources  = 0,
 315 +       .dev            = {
 316 +               .platform_data  = &qnap_ts409_button_data,
 317 +       },
 318 +};
 319 +
 320 +/*****************************************************************************
 321 + * General Setup
 322 + ****************************************************************************/
 323 +
 324 +/*
 325 + * QNAP TS-409 specific power off method via UART1-attached PIC
 326 + */
 327 +
 328 +#define UART1_REG(x)  (UART1_VIRT_BASE + ((UART_##x) << 2))
 329 +
 330 +static void qnap_ts409_power_off(void)
 331 +{
 332 +       /* 19200 baud divisor */
 333 +       const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
 334 +
 335 +       pr_info("%s: triggering power-off...\n", __func__);
 336 +
 337 +       /* hijack uart1 and reset into sane state (19200,8n1) */
 338 +       writel(0x83, UART1_REG(LCR));
 339 +       writel(divisor & 0xff, UART1_REG(DLL));
 340 +       writel((divisor >> 8) & 0xff, UART1_REG(DLM));
 341 +       writel(0x03, UART1_REG(LCR));
 342 +       writel(0x00, UART1_REG(IER));
 343 +       writel(0x00, UART1_REG(FCR));
 344 +       writel(0x00, UART1_REG(MCR));
 345 +
 346 +       /* send the power-off command 'A' to PIC */
 347 +       writel('A', UART1_REG(TX));
 348 +}
 349 +
 350 +static void __init qnap_ts409_init(void)
 351 +{
 352 +       /*
 353 +        * Setup basic Orion functions. Need to be called early.
 354 +        */
 355 +       orion5x_init();
 356 +
 357 +       orion5x_mpp_conf(0, MPP_UNUSED);
 358 +       orion5x_mpp_conf(1, MPP_UNUSED);
 359 +       orion5x_mpp_conf(2, MPP_UNUSED);
 360 +       orion5x_mpp_conf(3, MPP_UNUSED);
 361 +       orion5x_mpp_conf(4, MPP_GPIO);          /* HDD 1 status */
 362 +       orion5x_mpp_conf(5, MPP_GPIO);          /* HDD 2 status */
 363 +       orion5x_mpp_conf(6, MPP_GPIO);          /* HDD 3 status */
 364 +       orion5x_mpp_conf(7, MPP_GPIO);          /* HDD 4 status */
 365 +       orion5x_mpp_conf(8, MPP_UNUSED);
 366 +       orion5x_mpp_conf(9, MPP_UNUSED);
 367 +       orion5x_mpp_conf(10, MPP_GPIO);         /* RTC int */
 368 +       orion5x_mpp_conf(11, MPP_UNUSED);
 369 +       orion5x_mpp_conf(12, MPP_UNUSED);
 370 +       orion5x_mpp_conf(13, MPP_UNUSED);
 371 +       orion5x_mpp_conf(14, MPP_GPIO);         /* SW_RST */
 372 +       orion5x_mpp_conf(15, MPP_GPIO);         /* USB copy button */
 373 +       orion5x_mpp_conf(16, MPP_UART);         /* UART1 RXD */
 374 +       orion5x_mpp_conf(17, MPP_UART);         /* UART1 TXD */
 375 +       orion5x_mpp_conf(18, MPP_UNUSED);
 376 +       orion5x_mpp_conf(19, MPP_UNUSED);
 377 +
 378 +       /*
 379 +        * Configure peripherals.
 380 +        */
 381 +       orion5x_ehci0_init();
 382 +       ts409_find_mac_addr();
 383 +       orion5x_eth_init(&qnap_ts409_eth_data);
 384 +       orion5x_i2c_init();
 385 +       orion5x_uart0_init();
 386 +
 387 +       orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
 388 +                                  QNAP_TS409_NOR_BOOT_SIZE);
 389 +       platform_device_register(&qnap_ts409_nor_flash);
 390 +
 391 +       platform_device_register(&qnap_ts409_button_device);
 392 +
 393 +       /* Get RTC IRQ and register the chip */
 394 +       if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) {
 395 +               if (gpio_direction_input(TS409_RTC_GPIO) == 0)
 396 +                       qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO);
 397 +               else
 398 +                       gpio_free(TS409_RTC_GPIO);
 399 +       }
 400 +       if (qnap_ts409_i2c_rtc.irq == 0)
 401 +               pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
 402 +       i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
 403 +
 404 +       /* register ts409 specific power-off method */
 405 +       pm_power_off = qnap_ts409_power_off;
 406 +}
 407 +
 408 +MACHINE_START(TS409, "QNAP TS-409")
 409 +       /* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
 410 +       .phys_io        = ORION5X_REGS_PHYS_BASE,
 411 +       .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 412 +       .boot_params    = 0x00000100,
 413 +       .init_machine   = qnap_ts409_init,
 414 +       .map_io         = orion5x_map_io,
 415 +       .init_irq       = orion5x_init_irq,
 416 +       .timer          = &orion5x_timer,
 417 +       .fixup          = tag_fixup_mem32,
 418 +MACHINE_END