package/ep80579-drivers/patches/150-ocracoke_island.patch

   1 --- a/Embedded/src/GbE/iegbe_oem_phy.c
   2 +++ b/Embedded/src/GbE/iegbe_oem_phy.c
   3 @@ -65,6 +65,10 @@ static int32_t iegbe_oem_link_m88_setup(
   4  static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw);
   5  static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw);
   6
   7 +static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw);
   8 +static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data);
   9 +static int32_t oi_phy_setup (struct iegbe_hw *hw);
  10 +
  11  /**
  12   * iegbe_oem_setup_link
  13   * @hw: iegbe_hw struct containing device specific information
  14 @@ -114,6 +118,10 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
  15      }
  16
  17      switch (hw->phy_id) {
  18 +       case BCM5395S_PHY_ID:
  19 +               return E1000_SUCCESS;
  20 +               break;
  21 +
  22          case M88E1000_I_PHY_ID:
  23          case M88E1141_E_PHY_ID:
  24              ret_val = iegbe_oem_link_m88_setup(hw);
  25 @@ -121,6 +129,12 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
  26                  return ret_val;
  27              }
  28          break;
  29 +       case BCM5481_PHY_ID:
  30 +               ret_val = iegbe_oem_link_bcm5481_setup(hw);
  31 +               if(ret_val) {
  32 +                       return ret_val;
  33 +               }
  34 +               break;
  35          default:
  36              DEBUGOUT("Invalid PHY ID\n");
  37              return -E1000_ERR_PHY_TYPE;
  38 @@ -179,6 +193,51 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
  39  #endif /* ifdef EXTERNAL_MDIO */
  40  }
  41
  42 +/**
  43 + * iegbe_oem_link_bcm5481_setup
  44 + * @hw: iegbe_hw struct containing device specific information
  45 + *
  46 + * Returns E1000_SUCCESS, negative E1000 error code on failure
  47 + *
  48 + * copied verbatim from iegbe_oem_link_m88_setup
  49 + **/
  50 +static int32_t
  51 +iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw)
  52 +{
  53 +       int32_t ret_val;
  54 +       uint16_t phy_data;
  55 +
  56 +       //DEBUGFUNC(__func__);
  57 +
  58 +       if(!hw)
  59 +               return -1;
  60 +
  61 +       /* phy_reset_disable is set in iegbe_oem_set_phy_mode */
  62 +       if(hw->phy_reset_disable)
  63 +               return E1000_SUCCESS;
  64 +
  65 +       // Enable MDIX in extended control reg.
  66 +       ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data);
  67 +       if(ret_val)
  68 +       {
  69 +               DEBUGOUT("Unable to read BCM5481_ECTRL register\n");
  70 +               return ret_val;
  71 +       }
  72 +
  73 +       phy_data &= ~BCM5481_ECTRL_DISMDIX;
  74 +       ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data);
  75 +       if(ret_val)
  76 +       {
  77 +               DEBUGOUT("Unable to write BCM5481_ECTRL register\n");
  78 +               return ret_val;
  79 +       }
  80 +
  81 +       ret_val = oi_phy_setup (hw);
  82 +       if (ret_val)
  83 +               return ret_val;
  84 +
  85 +       return E1000_SUCCESS;
  86 +}
  87
  88  /**
  89   * iegbe_oem_link_m88_setup
  90 @@ -340,6 +399,11 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
  91       * see iegbe_phy_force_speed_duplex, which does the following for M88
  92       */
  93        switch (hw->phy_id) {
  94 +               case BCM5395S_PHY_ID:
  95 +               case BCM5481_PHY_ID:
  96 +                       DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n");
  97 +                       break;
  98 +
  99            case M88E1000_I_PHY_ID:
 100            case M88E1141_E_PHY_ID:
 101                ret_val = iegbe_oem_read_phy_reg_ex(hw,
 102 @@ -415,6 +479,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
 103       switch (hw->phy_id) {
 104           case M88E1000_I_PHY_ID:
 105           case M88E1141_E_PHY_ID:
 106 +               case BCM5481_PHY_ID:
 107 +               case BCM5395S_PHY_ID:
 108               DEBUGOUT("No DSP to reset on OEM PHY\n");
 109           break;
 110           default:
 111 @@ -460,6 +526,11 @@ iegbe_oem_cleanup_after_phy_reset(struct
 112       * see iegbe_phy_force_speed_duplex, which does the following for M88
 113       */
 114      switch (hw->phy_id) {
 115 +               case BCM5395S_PHY_ID:
 116 +               case BCM5481_PHY_ID:
 117 +            DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n");
 118 +        break;
 119 +
 120          case M88E1000_I_PHY_ID:
 121          case M88E1141_E_PHY_ID:
 122              /*
 123 @@ -573,6 +644,11 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
 124       * use iegbe_set_phy_mode as example
 125       */
 126      switch (hw->phy_id) {
 127 +               case BCM5395S_PHY_ID:
 128 +               case BCM5481_PHY_ID:
 129 +             DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n");
 130 +         break;
 131 +
 132           case M88E1000_I_PHY_ID:
 133           case M88E1141_E_PHY_ID:
 134               ret_val = iegbe_read_eeprom(hw,
 135 @@ -641,6 +717,19 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
 136      }
 137      hw->phy_type = iegbe_phy_oem;
 138
 139 +{
 140 +       // If MAC2 (BCM5395 switch), manually detect the phy
 141 +       struct iegbe_adapter *adapter;
 142 +       uint32_t device_number;
 143 +       adapter = (struct iegbe_adapter *) hw->back;
 144 +       device_number = PCI_SLOT(adapter->pdev->devfn);
 145 +       if (device_number == ICP_XXXX_MAC_2) {
 146 +               hw->phy_id = BCM5395S_PHY_ID;
 147 +               hw->phy_revision = 0;
 148 +               return E1000_SUCCESS;
 149 +       }
 150 +}
 151 +
 152      ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high);
 153      if(ret_val) {
 154          DEBUGOUT("Unable to read PHY register PHY_ID1\n");
 155 @@ -690,6 +779,8 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
 156      switch (hw->phy_id) {
 157           case M88E1000_I_PHY_ID:
 158           case M88E1141_E_PHY_ID:
 159 +               case BCM5481_PHY_ID:
 160 +               case BCM5395S_PHY_ID:
 161               phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
 162           break;
 163           default:
 164 @@ -738,6 +829,8 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
 165      switch (hw->phy_id) {
 166          case M88E1000_I_PHY_ID:
 167          case M88E1141_E_PHY_ID:
 168 +               case BCM5481_PHY_ID:
 169 +               case BCM5395S_PHY_ID:
 170              isCopper = TRUE;
 171          break;
 172          default:
 173 @@ -796,13 +889,13 @@ iegbe_oem_get_phy_dev_number(struct iegb
 174         switch(device_number)
 175      {
 176        case ICP_XXXX_MAC_0:
 177 -             hw->phy_addr = 0x00;
 178 +             hw->phy_addr = 0x01;
 179           break;
 180        case ICP_XXXX_MAC_1:
 181 -             hw->phy_addr = 0x01;
 182 +             hw->phy_addr = 0x02;
 183           break;
 184        case ICP_XXXX_MAC_2:
 185 -             hw->phy_addr = 0x02;
 186 +             hw->phy_addr = 0x00;
 187           break;
 188           default:  hw->phy_addr = 0x00;
 189      }
 190 @@ -851,6 +944,12 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
 191      if(!adapter || !ifr) {
 192          return -1;
 193      }
 194 +
 195 +       // If MAC2 (BCM5395 switch) then leave now
 196 +       if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) {
 197 +                       return -1;
 198 +       }
 199 +
 200      switch (data->reg_num) {
 201          case PHY_CTRL:
 202              if(mii_reg & MII_CR_POWER_DOWN) {
 203 @@ -987,6 +1086,11 @@ void iegbe_oem_get_phy_regs(struct iegbe
 204       * [10] = mdix mode
 205       */
 206      switch (adapter->hw.phy_id) {
 207 +       case BCM5395S_PHY_ID:
 208 +       case BCM5481_PHY_ID:
 209 +               DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n");
 210 +       break;
 211 +
 212          case M88E1000_I_PHY_ID:
 213          case M88E1141_E_PHY_ID:
 214              if(corrected_len > 0) {
 215 @@ -1068,8 +1172,13 @@ iegbe_oem_phy_loopback(struct iegbe_adap
 216       * Loopback configuration is the same for each of the supported PHYs.
 217       */
 218      switch (adapter->hw.phy_id) {
 219 +               case BCM5395S_PHY_ID:
 220 +                       DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n");
 221 +                       break;
 222 +
 223          case M88E1000_I_PHY_ID:
 224          case M88E1141_E_PHY_ID:
 225 +               case BCM5481_PHY_ID:
 226
 227            adapter->hw.autoneg = FALSE;
 228
 229 @@ -1182,8 +1291,14 @@ iegbe_oem_loopback_cleanup(struct iegbe_
 230      }
 231
 232      switch (adapter->hw.phy_id) {
 233 +               case BCM5395S_PHY_ID:
 234 +               DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n");
 235 +               return;
 236 +               break;
 237 +
 238          case M88E1000_I_PHY_ID:
 239          case M88E1141_E_PHY_ID:
 240 +               case BCM5481_PHY_ID:
 241          default:
 242              adapter->hw.autoneg = TRUE;
 243
 244 @@ -1243,6 +1358,11 @@ iegbe_oem_phy_speed_downgraded(struct ie
 245       */
 246
 247      switch (hw->phy_id) {
 248 +               case BCM5395S_PHY_ID:
 249 +               case BCM5481_PHY_ID:
 250 +                       *isDowngraded = 0;
 251 +                       break;
 252 +
 253          case M88E1000_I_PHY_ID:
 254          case M88E1141_E_PHY_ID:
 255              ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
 256 @@ -1305,6 +1425,11 @@ iegbe_oem_check_polarity(struct iegbe_hw
 257       */
 258
 259      switch (hw->phy_id) {
 260 +               case BCM5395S_PHY_ID:
 261 +               case BCM5481_PHY_ID:
 262 +                       *polarity = 0;
 263 +                       break;
 264 +
 265          case M88E1000_I_PHY_ID:
 266          case M88E1141_E_PHY_ID:
 267              /* return the Polarity bit in the Status register. */
 268 @@ -1367,6 +1492,25 @@ iegbe_oem_phy_is_full_duplex(struct iegb
 269       */
 270
 271        switch (hw->phy_id) {
 272 +               case BCM5395S_PHY_ID:
 273 +                       /* Always full duplex */
 274 +                       *isFD = 1;
 275 +                       break;
 276 +
 277 +               case BCM5481_PHY_ID:
 278 +                       ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
 279 +                       if(ret_val) return ret_val;
 280 +
 281 +                               switch (BCM5481_ASTAT_HCD(phy_data)) {
 282 +                                       case BCM5481_ASTAT_1KBTFD:
 283 +                                       case BCM5481_ASTAT_100BTXFD:
 284 +                                               *isFD = 1;
 285 +                                               break;
 286 +                                       default:
 287 +                                               *isFD = 0;
 288 +                               }
 289 +                       break;
 290 +
 291            case M88E1000_I_PHY_ID:
 292            case M88E1141_E_PHY_ID:
 293               ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
 294 @@ -1423,6 +1567,25 @@ iegbe_oem_phy_is_speed_1000(struct iegbe
 295       */
 296
 297      switch (hw->phy_id) {
 298 +               case BCM5395S_PHY_ID:
 299 +                       /* Always 1000mb */
 300 +                       *is1000 = 1;
 301 +                       break;
 302 +
 303 +               case BCM5481_PHY_ID:
 304 +                       ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
 305 +                       if(ret_val) return ret_val;
 306 +
 307 +                               switch (BCM5481_ASTAT_HCD(phy_data)) {
 308 +                                       case BCM5481_ASTAT_1KBTFD:
 309 +                                       case BCM5481_ASTAT_1KBTHD:
 310 +                                               *is1000 = 1;
 311 +                                       break;
 312 +                               default:
 313 +                                       *is1000 = 0;
 314 +                               }
 315 +                       break;
 316 +
 317          case M88E1000_I_PHY_ID:
 318          case M88E1141_E_PHY_ID:
 319              ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
 320 @@ -1478,6 +1641,25 @@ iegbe_oem_phy_is_speed_100(struct iegbe_
 321       * see iegbe_config_mac_to_phy
 322       */
 323      switch (hw->phy_id) {
 324 +               case BCM5395S_PHY_ID:
 325 +                       /* Always 1000Mb, never 100mb */
 326 +                       *is100 = 0;
 327 +                       break;
 328 +
 329 +               case BCM5481_PHY_ID:
 330 +                       ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
 331 +                       if(ret_val) return ret_val;
 332 +
 333 +                       switch (BCM5481_ASTAT_HCD(phy_data)) {
 334 +                               case BCM5481_ASTAT_100BTXFD:
 335 +                               case BCM5481_ASTAT_100BTXHD:
 336 +                                       *is100 = 1;
 337 +                                       break;
 338 +                               default:
 339 +                                       *is100 = 0;
 340 +                       }
 341 +                       break;
 342 +
 343          case M88E1000_I_PHY_ID:
 344          case M88E1141_E_PHY_ID:
 345              ret_val = iegbe_oem_read_phy_reg_ex(hw,
 346 @@ -1535,6 +1717,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
 347       * see iegbe_phy_m88_get_info
 348       */
 349      switch (hw->phy_id) {
 350 +               case BCM5395S_PHY_ID:
 351 +               case BCM5481_PHY_ID:
 352 +                       DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n");
 353 +                       break;
 354 +
 355          case M88E1000_I_PHY_ID:
 356          case M88E1141_E_PHY_ID:
 357    /* The downshift status is checked only once, after link is
 358 @@ -1636,8 +1823,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
 359       * the M88 used in truxton.
 360       */
 361      switch (hw->phy_id) {
 362 +               case BCM5395S_PHY_ID:
 363 +                       DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n");
 364 +                       break;
 365 +
 366          case M88E1000_I_PHY_ID:
 367          case M88E1141_E_PHY_ID:
 368 +               case BCM5481_PHY_ID:
 369              ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data);
 370              if(ret_val) {
 371                  DEBUGOUT("Unable to read register PHY_CTRL\n");
 372 @@ -1699,6 +1891,8 @@ iegbe_oem_phy_init_script(struct iegbe_h
 373      switch (hw->phy_id) {
 374          case M88E1000_I_PHY_ID:
 375          case M88E1141_E_PHY_ID:
 376 +               case BCM5481_PHY_ID:
 377 +               case BCM5395S_PHY_ID:
 378              DEBUGOUT("Nothing to do for OEM PHY Init");
 379          break;
 380          default:
 381 @@ -1735,6 +1929,11 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
 382          return -1;
 383      }
 384
 385 +       if (hw->phy_id == BCM5395S_PHY_ID) {
 386 +               DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n");
 387 +               return -1;
 388 +       }
 389 +
 390      /* call the GCU func that will read the phy
 391       *
 392       * Make note that the M88 phy is what'll be used on Truxton.
 393 @@ -1782,6 +1981,11 @@ iegbe_oem_set_trans_gasket(struct iegbe_
 394      }
 395
 396       switch (hw->phy_id) {
 397 +               case BCM5395S_PHY_ID:
 398 +               case BCM5481_PHY_ID:
 399 +                       DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n");
 400 +                       break;
 401 +
 402           case M88E1000_I_PHY_ID:
 403           case M88E1141_E_PHY_ID:
 404           /* Gasket set correctly for Marvell Phys, so nothing to do */
 405 @@ -1886,6 +2090,8 @@ iegbe_oem_phy_needs_reset_with_mac(struc
 406      switch (hw->phy_id) {
 407          case M88E1000_I_PHY_ID:
 408          case M88E1141_E_PHY_ID:
 409 +               case BCM5481_PHY_ID:
 410 +               case BCM5395S_PHY_ID:
 411              ret_val = FALSE;
 412          break;
 413          default:
 414 @@ -1935,6 +2141,8 @@ iegbe_oem_config_dsp_after_link_change(s
 415      switch (hw->phy_id) {
 416          case M88E1000_I_PHY_ID:
 417          case M88E1141_E_PHY_ID:
 418 +               case BCM5481_PHY_ID:
 419 +               case BCM5395S_PHY_ID:
 420              DEBUGOUT("No DSP to configure on OEM PHY");
 421          break;
 422          default:
 423 @@ -1978,6 +2186,12 @@ iegbe_oem_get_cable_length(struct iegbe_
 424      }
 425
 426      switch (hw->phy_id) {
 427 +               case BCM5395S_PHY_ID:
 428 +               case BCM5481_PHY_ID:
 429 +                       *min_length = 0;
 430 +                       *max_length = iegbe_igp_cable_length_150;
 431 +                       break;
 432 +
 433          case M88E1000_I_PHY_ID:
 434          case M88E1141_E_PHY_ID:
 435              ret_val = iegbe_oem_read_phy_reg_ex(hw,
 436 @@ -2061,6 +2275,23 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
 437       */
 438
 439      switch (hw->phy_id) {
 440 +               case BCM5395S_PHY_ID:
 441 +                       /* Link always up */
 442 +                       *isUp = TRUE;
 443 +                       return E1000_SUCCESS;
 444 +                       break;
 445 +
 446 +               case BCM5481_PHY_ID:
 447 +                       iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
 448 +                       ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
 449 +                       if(ret_val)
 450 +                       {
 451 +                               DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n");
 452 +                               return ret_val;
 453 +                       }
 454 +                       statusMask = BCM5481_ESTAT_LINK;
 455 +                       break;
 456 +
 457          case M88E1000_I_PHY_ID:
 458          case M88E1141_E_PHY_ID:
 459              iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
 460 @@ -2092,3 +2323,210 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
 461  #endif /* ifdef EXTERNAL_MDIO */
 462  }
 463
 464 +
 465 +
 466 +//-----
 467 +// Read BCM5481 expansion register
 468 +//
 469 +int32_t
 470 +bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data)
 471 +{
 472 +       int ret;
 473 +       uint16_t selector;
 474 +       uint16_t reg_data;
 475 +
 476 +       // Get the current value of bits 15:12
 477 +       ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector);
 478 +       if (ret)
 479 +               return ret;
 480 +
 481 +       // Select the expansion register
 482 +       selector &= 0xf000;
 483 +       selector |= (0xf << 8) | (reg);
 484 +       iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
 485 +
 486 +       // Read the expansion register
 487 +       ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &reg_data);
 488 +
 489 +       // De-select the expansion registers.
 490 +       selector &= 0xf000;
 491 +       iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
 492 +
 493 +       if (ret)
 494 +               return ret;
 495 +
 496 +       *data = reg_data;
 497 +       return ret;
 498 +}
 499 +
 500 +//-----
 501 +//     Read reg 0x18 sub-register
 502 +//
 503 +static int32_t
 504 +bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data)
 505 +{
 506 +       int     ret;
 507 +       uint16_t        tmp_data;
 508 +
 509 +       // Select reg 0x18, sv
 510 +       tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL;
 511 +       ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data);
 512 +       if(ret)
 513 +               return ret;
 514 +
 515 +       // Read reg 0x18, sv
 516 +       ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data);
 517 +       if(ret)
 518 +               return ret;
 519 +
 520 +       *data = tmp_data;
 521 +       return ret;
 522 +}
 523 +
 524 +//-----
 525 +//     Read reg 0x1C sub-register
 526 +//
 527 +int32_t
 528 +bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data)
 529 +{
 530 +       int ret;
 531 +       uint16_t tmp_data;
 532 +
 533 +       // Select reg 0x1c, sv
 534 +       tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT);
 535 +
 536 +       ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data);
 537 +       if(ret)
 538 +               return ret;
 539 +
 540 +       // Read reg 0x1c, sv
 541 +       ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data);
 542 +       if(ret)
 543 +               return ret;
 544 +
 545 +       *data = tmp_data;
 546 +       return ret;
 547 +}
 548 +
 549 +//-----
 550 +//     Read-modify-write a 0x1C register.
 551 +//
 552 +//     hw   - hardware access info.
 553 +//     reg  - 0x1C register to modify.
 554 +//     data - bits which should be set.
 555 +//     mask - the '1' bits in this argument will be cleared in the data
 556 +//         read from 'reg' then 'data' will be or'd in and the result
 557 +//         will be written to 'reg'.
 558 +
 559 +int32_t
 560 +bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask)
 561 +{
 562 +       int32_t         ret;
 563 +       uint16_t        reg_data;
 564 +
 565 +       ret = 0;
 566 +
 567 +       ret = bcm5481_read_1csv (hw, reg, &reg_data);
 568 +       if (ret)
 569 +       {
 570 +               DEBUGOUT("Unable to read BCM5481 1CH register\n");
 571 +               printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg);
 572 +               return ret;
 573 +       }
 574 +
 575 +       reg_data &= ~mask;
 576 +       reg_data |= (BCM5481_R1CH_WE | data);
 577 +
 578 +       ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data);
 579 +       if(ret)
 580 +       {
 581 +               DEBUGOUT("Unable to write BCM5481 1CH register\n");
 582 +               printk (KERN_ERR "Unable to write BCM5481 1CH register\n");
 583 +               return ret;
 584 +       }
 585 +
 586 +       return ret;
 587 +}
 588 +
 589 +int32_t
 590 +oi_phy_setup (struct iegbe_hw *hw)
 591 +{
 592 +       int     ret;
 593 +       uint16_t        pmii_data;
 594 +       uint16_t        mctrl_data;
 595 +       uint16_t        cacr_data;
 596 +
 597 +       ret = 0;
 598 +
 599 +       // Set low power mode via reg 0x18, sv010, bit 6
 600 +       // Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits.
 601 +       ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data);
 602 +       if (ret)
 603 +       {
 604 +               DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n");
 605 +               printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n");
 606 +               return ret;
 607 +       }
 608 +
 609 +       // Set the LPM bit in the data just read and write back to sv010
 610 +       // The shadow register select bits [2:0] are set by reading the sv010
 611 +       // register.
 612 +       pmii_data |= BCM5481_R18H_SV010_LPM;
 613 +       ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data);
 614 +       if(ret)
 615 +       {
 616 +               DEBUGOUT("Unable to write BCM5481_R18H register\n");
 617 +               printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
 618 +               return ret;
 619 +       }
 620 +
 621 +
 622 +       // Set the RGMII RXD to RXC skew bit in reg 0x18, sv111
 623 +
 624 +       if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data))
 625 +       {
 626 +               DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n");
 627 +               printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n");
 628 +               return ret;
 629 +       }
 630 +       mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW);
 631 +
 632 +       ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data);
 633 +       if(ret)
 634 +       {
 635 +               DEBUGOUT("Unable to write BCM5481_R18H register\n");
 636 +               printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
 637 +               return ret;
 638 +       }
 639 +
 640 +       // Enable RGMII transmit clock delay in reg 0x1c, sv00011
 641 +       ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data);
 642 +       if (ret)
 643 +       {
 644 +               DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n");
 645 +               printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n");
 646 +               return ret;
 647 +       }
 648 +
 649 +       cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD);
 650 +
 651 +       ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data);
 652 +       if(ret)
 653 +       {
 654 +               DEBUGOUT("Unable to write BCM5481_R1CH register\n");
 655 +               printk (KERN_ERR "Unable to write BCM5481_R1CH register\n");
 656 +               return ret;
 657 +       }
 658 +
 659 +       // Enable dual link speed indication (0x1c, sv 00010, bit 2)
 660 +       ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK);
 661 +       if (ret)
 662 +               return ret;
 663 +
 664 +       // Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0)
 665 +       ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN);
 666 +       if (ret)
 667 +               return ret;
 668 +
 669 +       return ret;
 670 +}
 671 --- a/Embedded/src/GbE/iegbe_oem_phy.h
 672 +++ b/Embedded/src/GbE/iegbe_oem_phy.h
 673 @@ -95,6 +95,8 @@ int32_t iegbe_oem_phy_is_link_up(struct
 674
 675  #define DEFAULT_ICP_XXXX_TIPG_IPGT 8      /* Inter Packet Gap Transmit Time */
 676  #define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL
 677 +#define BCM5481_PHY_ID         0x0143BCA0
 678 +#define BCM5395S_PHY_ID                0x0143BCF0
 679
 680  /* Miscellaneous defines */
 681  #ifdef IEGBE_10_100_ONLY
 682 @@ -103,5 +105,65 @@ int32_t iegbe_oem_phy_is_link_up(struct
 683      #define ICP_XXXX_AUTONEG_ADV_DEFAULT       0x2F
 684  #endif
 685
 686 +/* BCM5481 specifics */
 687 +
 688 +#define BCM5481_ECTRL          (0x10)
 689 +#define BCM5481_ESTAT          (0x11)
 690 +#define BCM5481_RXERR          (0x12)
 691 +#define BCM5481_EXPRW          (0x15)
 692 +#define BCM5481_EXPACC         (0x17)
 693 +#define BCM5481_ASTAT          (0x19)
 694 +#define BCM5481_R18H           (0x18)
 695 +#define BCM5481_R1CH           (0x1c)
 696 +
 697 +/* indirect register access via register 18h */
 698 +
 699 +#define BCM5481_R18H_SV_MASK   (7) // Mask for SV bits.
 700 +#define BCM5481_R18H_SV_ACTRL  (0) // SV000 Aux. control
 701 +#define BCM5481_R18H_SV_10BT   (1) // SV001 10Base-T
 702 +#define BCM5481_R18H_SV_PMII   (2) // SV010 Power/MII control
 703 +#define BCM5481_R18H_SV_MTEST  (4) // SV100 Misc. test
 704 +#define BCM5481_R18H_SV_MCTRL  (7) // SV111 Misc. control
 705 +
 706 +#define BCM5481_R18H_SV001_POL (1 << 13) // Polarity
 707 +#define BCM5481_R18H_SV010_LPM (1 << 6)
 708 +#define BCM5481_R18H_SV111_SKEW        (1 << 8)
 709 +#define BCM5481_R18H_WE                (1 << 15) // Write enable
 710 +
 711 +// 0x1c registers
 712 +#define BCM5481_R1CH_SV_SHIFT  (10)
 713 +#define BCM5481_R1CH_SV_MASK   (0x1f)
 714 +#define BCM5481_R1CH_SC1       (0x02) // sv00010 Spare control 1
 715 +#define BCM5481_R1CH_CACR      (0x03) // sv00011 Clock alignment control
 716 +#define BCM5481_R1CH_LCTRL     (0x09) // sv01001 LED control
 717 +#define BCM5481_R1CH_LEDS1     (0x0d) // sv01101 LED selector 1
 718 +
 719 +// 0x1c common
 720 +#define BCM5481_R1CH_WE                (1 << 15) // Write enable
 721 +
 722 +// 0x1c, sv 00010
 723 +#define BCM5481_R1CH_SC1_LINK  (1 << 2) // sv00010 Linkspeed
 724 +
 725 +// 0x1c, sv 00011
 726 +#define BCM5481_R1CH_CACR_TCD  (1 << 9) // sv00011 RGMII tx clock delay
 727 +
 728 +// 0x1c, sv 01001
 729 +#define BCM5481_R1CH_LCTRL_ALEN        (1 << 4) // Activity/Link enable on ACTIVITY LED
 730 +#define BCM5481_R1CH_LCTRL_AEN (1 << 3) // Activity enable on ACTIVITY LED
 731 +
 732 +#define BCM5481_ECTRL_DISMDIX  (1 <<14)
 733 +
 734 +#define BCM5481_MCTRL_AUTOMDIX (1 <<9)
 735 +
 736 +#define BCM5481_ESTAT_LINK     (1 << 8)
 737 +
 738 +#define BCM5481_ASTAT_ANC      (1 << 15)
 739 +#define BCM5481_ASTAT_ANHCD    (7 << 8)
 740 +#define BCM5481_ASTAT_HCD(x)   ((x >> 8) & 7)
 741 +#define BCM5481_ASTAT_1KBTFD   (0x7)
 742 +#define BCM5481_ASTAT_1KBTHD   (0x6)
 743 +#define BCM5481_ASTAT_100BTXFD (0x5)
 744 +#define BCM5481_ASTAT_100BTXHD (0x3)
 745 +
 746  #endif /* ifndef _IEGBE_OEM_PHY_H_ */
 747