ramips: use gpio-keys-polled instead of gpio-buttons
[openwrt.git] / target / linux / ar71xx / patches-3.2 / 604-MIPS-ath79-ap81-fixes.patch
1 --- a/arch/mips/ath79/mach-ap81.c
2 +++ b/arch/mips/ath79/mach-ap81.c
3 @@ -9,12 +9,16 @@
4 * by the Free Software Foundation.
5 */
6
7 -#include "machtypes.h"
8 -#include "dev-wmac.h"
9 +#include <linux/mtd/mtd.h>
10 +#include <linux/mtd/partitions.h>
11 +
12 +#include "dev-eth.h"
13 #include "dev-gpio-buttons.h"
14 #include "dev-leds-gpio.h"
15 -#include "dev-spi.h"
16 +#include "dev-m25p80.h"
17 #include "dev-usb.h"
18 +#include "dev-wmac.h"
19 +#include "machtypes.h"
20
21 #define AP81_GPIO_LED_STATUS 1
22 #define AP81_GPIO_LED_AOSS 3
23 @@ -29,6 +33,37 @@
24
25 #define AP81_CAL_DATA_ADDR 0x1fff1000
26
27 +static struct mtd_partition ap81_partitions[] = {
28 + {
29 + .name = "u-boot",
30 + .offset = 0,
31 + .size = 0x040000,
32 + .mask_flags = MTD_WRITEABLE,
33 + }, {
34 + .name = "u-boot-env",
35 + .offset = 0x040000,
36 + .size = 0x010000,
37 + }, {
38 + .name = "rootfs",
39 + .offset = 0x050000,
40 + .size = 0x500000,
41 + }, {
42 + .name = "uImage",
43 + .offset = 0x550000,
44 + .size = 0x100000,
45 + }, {
46 + .name = "ART",
47 + .offset = 0x650000,
48 + .size = 0x1b0000,
49 + .mask_flags = MTD_WRITEABLE,
50 + }
51 +};
52 +
53 +static struct flash_platform_data ap81_flash_data = {
54 + .parts = ap81_partitions,
55 + .nr_parts = ARRAY_SIZE(ap81_partitions),
56 +};
57 +
58 static struct gpio_led ap81_leds_gpio[] __initdata = {
59 {
60 .name = "ap81:green:status",
61 @@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio
62 }
63 };
64
65 -static struct ath79_spi_controller_data ap81_spi0_data = {
66 - .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
67 - .cs_line = 0,
68 -};
69 -
70 -static struct spi_board_info ap81_spi_info[] = {
71 - {
72 - .bus_num = 0,
73 - .chip_select = 0,
74 - .max_speed_hz = 25000000,
75 - .modalias = "m25p64",
76 - .controller_data = &ap81_spi0_data,
77 - }
78 -};
79 -
80 -static struct ath79_spi_platform_data ap81_spi_data = {
81 - .bus_num = 0,
82 - .num_chipselect = 1,
83 -};
84 -
85 static void __init ap81_setup(void)
86 {
87 u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
88 @@ -96,10 +111,24 @@ static void __init ap81_setup(void)
89 ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
90 ARRAY_SIZE(ap81_gpio_keys),
91 ap81_gpio_keys);
92 - ath79_register_spi(&ap81_spi_data, ap81_spi_info,
93 - ARRAY_SIZE(ap81_spi_info));
94 + ath79_register_m25p80(&ap81_flash_data);
95 ath79_register_wmac(cal_data, NULL);
96 ath79_register_usb();
97 +
98 + ath79_register_mdio(0, 0x0);
99 +
100 + ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
101 + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
102 + ath79_eth0_data.speed = SPEED_100;
103 + ath79_eth0_data.duplex = DUPLEX_FULL;
104 + ath79_eth0_data.has_ar8216 = 1;
105 +
106 + ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
107 + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
108 + ath79_eth1_data.phy_mask = 0x10;
109 +
110 + ath79_register_eth(0);
111 + ath79_register_eth(1);
112 }
113
114 MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
115 --- a/arch/mips/ath79/Kconfig
116 +++ b/arch/mips/ath79/Kconfig
117 @@ -18,9 +18,10 @@ config ATH79_MACH_AP121
118 config ATH79_MACH_AP81
119 bool "Atheros AP81 reference board"
120 select SOC_AR913X
121 + select ATH79_DEV_ETH
122 select ATH79_DEV_GPIO_BUTTONS
123 select ATH79_DEV_LEDS_GPIO
124 - select ATH79_DEV_SPI
125 + select ATH79_DEV_M25P80
126 select ATH79_DEV_USB
127 select ATH79_DEV_WMAC
128 help
This page took 0.051802 seconds and 5 git commands to generate.