ramips: use gpio-keys-polled instead of gpio-buttons
[openwrt.git] / target / linux / ar71xx / patches-3.2 / 611-MIPS-ath79-TEW673GRU-support.patch
1 --- a/arch/mips/ath79/Kconfig
2 +++ b/arch/mips/ath79/Kconfig
3 @@ -491,6 +491,17 @@ config ATH79_MACH_TEW_632BRP
4 select ATH79_DEV_WMAC
5 select ATH79_NVRAM
6
7 +config ATH79_MACH_TEW_673GRU
8 + bool "TRENDnet TEW-673GRU support"
9 + select SOC_AR71XX
10 + select ATH79_DEV_AP9X_PCI if PCI
11 + select ATH79_DEV_ETH
12 + select ATH79_DEV_GPIO_BUTTONS
13 + select ATH79_DEV_LEDS_GPIO
14 + select ATH79_DEV_M25P80
15 + select ATH79_DEV_USB
16 + select ATH79_NVRAM
17 +
18 config ATH79_MACH_UBNT
19 bool "Ubiquiti AR71xx based boards support"
20 select SOC_AR71XX
21 --- a/arch/mips/ath79/machtypes.h
22 +++ b/arch/mips/ath79/machtypes.h
23 @@ -53,6 +53,7 @@ enum ath79_mach_type {
24 ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
25 ATH79_MACH_RW2458N, /* Redwave RW2458N */
26 ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
27 + ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
28 ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
29 ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
30 ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
31 --- a/arch/mips/ath79/Makefile
32 +++ b/arch/mips/ath79/Makefile
33 @@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-
34 obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
35 obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
36 obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
37 +obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
38 obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
39 obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
40 obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
This page took 0.044194 seconds and 5 git commands to generate.