ar71xx: add default network config for the RB433UAH board
[openwrt.git] / target / linux / rdc / patches-2.6.30 / 010-rdc_cpu_ident.patch
1 --- /dev/null
2 +++ b/Documentation/x86/rdc.txt
3 @@ -0,0 +1,69 @@
4 +
5 +Introduction
6 +============
7 +
8 +RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC
9 +(system-on-chips) for a number of years. They are not the fastest of
10 +CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility
11 +coupled with very low power consumption[1] and low cost make them ideal
12 +for embedded applications.
13 +
14 +
15 +Where to find
16 +=============
17 +
18 +RDC chips show up in numerous embedded devices, but be careful since
19 +many of them will not run Linux 2.6 without significant expertise.
20 +
21 +There are several variants of what the linux kernel refers to generically
22 +as RDC321X: R8610, R321x, S3282 and AMRISC20000.
23 +
24 +R321x: Found in various routers, see the OpenWrt project for details,
25 + http://wiki.openwrt.org/oldwiki/rdcport
26 +
27 +R8610: Found on the RDC evaluation board
28 + http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/
29 +
30 +AMRISC20000: Found in the MGB-100 wireless hard disk
31 + http://tintuc.no-ip.com/linux/tipps/mgb100/
32 +
33 +S3282: Found in various NAS devices, including the Bifferboard
34 + http://www.bifferos.com
35 +
36 +
37 +Kernel Configuration
38 +====================
39 +
40 +Add support for this CPU with CONFIG_X86_RDC321X. Ensure that maths
41 +emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE
42 +(CONFIG_X86_MCE not selected).
43 +
44 +
45 +CPU detection
46 +=============
47 +
48 +None of these chips support the cpuid instruction, so as with some
49 +other x86 compatible SoCs, we must check the north bridge and look
50 +for specific 'signature' PCI device config.
51 +
52 +The current detection code has been tested only on the Bifferboard
53 +(S3282 CPU), please send bug reports or success stories with
54 +other devices to bifferos@yahoo.co.uk.
55 +
56 +
57 +Credits
58 +=======
59 +
60 +Many thanks to RDC for providing the customer codes to allow
61 +detection of all known variants, without which this detection code
62 +would have been very hard to ascertain.
63 +
64 +
65 +References
66 +==========
67 +
68 +[1] S3282 in certain NAS solutions consumes less than 1W
69 +
70 +
71 +mark@bifferos.com 2009
72 +
73 --- a/arch/x86/Kconfig
74 +++ b/arch/x86/Kconfig
75 @@ -378,6 +378,7 @@ config X86_RDC321X
76 bool "RDC R-321x SoC"
77 depends on X86_32
78 depends on X86_EXTENDED_PLATFORM
79 + select PCI
80 select M486
81 select X86_REBOOTFIXUPS
82 select EMBEDDED
83 --- a/arch/x86/include/asm/processor.h
84 +++ b/arch/x86/include/asm/processor.h
85 @@ -121,7 +121,8 @@ struct cpuinfo_x86 {
86 #define X86_VENDOR_CENTAUR 5
87 #define X86_VENDOR_TRANSMETA 7
88 #define X86_VENDOR_NSC 8
89 -#define X86_VENDOR_NUM 9
90 +#define X86_VENDOR_RDC 9
91 +#define X86_VENDOR_NUM 10
92
93 #define X86_VENDOR_UNKNOWN 0xff
94
95 --- a/arch/x86/kernel/cpu/Makefile
96 +++ b/arch/x86/kernel/cpu/Makefile
97 @@ -22,6 +22,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix
98 obj-$(CONFIG_CPU_SUP_CENTAUR) += centaur.o
99 obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o
100 obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o
101 +obj-$(CONFIG_X86_RDC321X) += rdc.o
102
103 obj-$(CONFIG_X86_MCE) += mcheck/
104 obj-$(CONFIG_MTRR) += mtrr/
105 --- /dev/null
106 +++ b/arch/x86/kernel/cpu/rdc.c
107 @@ -0,0 +1,69 @@
108 +/*
109 + * See Documentation/x86/rdc.txt
110 + *
111 + * mark@bifferos.com
112 + */
113 +
114 +#include <linux/pci.h>
115 +#include <asm/pci-direct.h>
116 +#include "cpu.h"
117 +
118 +
119 +static void __cpuinit rdc_identify(struct cpuinfo_x86 *c)
120 +{
121 + u16 vendor, device;
122 + u32 customer_id;
123 +
124 + if (!early_pci_allowed())
125 + return;
126 +
127 + /* RDC CPU is SoC (system-on-chip), Northbridge is always present */
128 + vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID);
129 + device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
130 +
131 + if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020)
132 + return; /* not RDC */
133 + /*
134 + * NB: We could go on and check other devices, e.g. r6040 NIC, but
135 + * that's probably overkill
136 + */
137 +
138 + customer_id = read_pci_config(0, 0, 0, 0x90);
139 +
140 + switch (customer_id) {
141 + /* id names are from RDC */
142 + case 0x00321000:
143 + strcpy(c->x86_model_id, "R3210/R3211");
144 + break;
145 + case 0x00321001:
146 + strcpy(c->x86_model_id, "AMITRISC20000/20010");
147 + break;
148 + case 0x00321002:
149 + strcpy(c->x86_model_id, "R3210X/Edimax");
150 + break;
151 + case 0x00321003:
152 + strcpy(c->x86_model_id, "R3210/Kcodes");
153 + break;
154 + case 0x00321004: /* tested */
155 + strcpy(c->x86_model_id, "S3282/CodeTek");
156 + break;
157 + case 0x00321007:
158 + strcpy(c->x86_model_id, "R8610");
159 + break;
160 + default:
161 + pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id);
162 + break;
163 + }
164 +
165 + strcpy(c->x86_vendor_id, "RDC");
166 + c->x86_vendor = X86_VENDOR_RDC;
167 +}
168 +
169 +static const struct cpu_dev __cpuinitconst rdc_cpu_dev = {
170 + .c_vendor = "RDC",
171 + .c_ident = { "RDC" },
172 + .c_identify = rdc_identify,
173 + .c_x86_vendor = X86_VENDOR_RDC,
174 +};
175 +
176 +cpu_dev_register(rdc_cpu_dev);
This page took 0.074803 seconds and 5 git commands to generate.