[kernel] Add mx2 target with very basic support for the vp6500 voip phone
[openwrt.git] / target / linux / mx2 / files / arch / arm / mach-mx2 / mach-vp6500.c
1 #include <linux/platform_device.h>
2 #include <linux/mtd/mtd.h>
3 #include <linux/mtd/physmap.h>
4 #include <linux/gpio.h>
5 #include <linux/leds.h>
6
7 #include <mach/common.h>
8 #include <mach/hardware.h>
9 #include <asm/mach-types.h>
10 #include <asm/mach/arch.h>
11 #include <asm/mach/time.h>
12 #include <asm/mach/map.h>
13 #include <mach/imx-uart.h>
14 #include <mach/imxfb.h>
15 #include <mach/iomux-mx21.h>
16 #include <mach/board-vp6500.h>
17
18 #include "devices.h"
19
20 #include <linux/input.h>
21 #include <linux/input/matrix_keypad.h>
22
23 static unsigned int vp6500_pins[] = {
24
25 /* UART1 */
26 PE12_PF_UART1_TXD,
27 PE13_PF_UART1_RXD,
28
29 #if 0
30 /* LCDC */
31 PA5_PF_LSCLK,
32 PA6_PF_LD0,
33 PA7_PF_LD1,
34 PA8_PF_LD2,
35 PA9_PF_LD3,
36 PA10_PF_LD4,
37 PA11_PF_LD5,
38 PA12_PF_LD6,
39 PA13_PF_LD7,
40 PA14_PF_LD8,
41 PA15_PF_LD9,
42 PA16_PF_LD10,
43 PA17_PF_LD11,
44 PA18_PF_LD12,
45 PA19_PF_LD13,
46 PA20_PF_LD14,
47 PA21_PF_LD15,
48 PA22_PF_LD16,
49 PA28_PF_HSYNC,
50 PA29_PF_VSYNC,
51 PA30_PF_CONTRAST,
52 PA31_PF_OE_ACD,
53 #endif
54 };
55
56 static struct physmap_flash_data vp6500_flash_data = {
57 .width = 2,
58 };
59
60 static struct resource vp6500_flash_resource = {
61 .start = MX21_CS0_BASE_ADDR,
62 .end = MX21_CS0_BASE_ADDR + SZ_64M - 1,
63 .flags = IORESOURCE_MEM,
64 };
65
66 static struct platform_device vp6500_nor_mtd_device = {
67 .name = "physmap-flash",
68 .id = -1,
69 .dev = {
70 .platform_data = &vp6500_flash_data,
71 },
72 .num_resources = 1,
73 .resource = &vp6500_flash_resource,
74 };
75
76 static struct gpio_led vp6500_leds[] = {
77 {
78 .name = "vp6500:orange:keypad",
79 .gpio = VP6500_GPIO_KEYPAD_LEDS,
80 },
81 };
82
83 static struct gpio_led_platform_data vp6500_leds_data = {
84 .leds = vp6500_leds,
85 .num_leds = ARRAY_SIZE(vp6500_leds),
86 };
87
88 static struct platform_device vp6500_leds_device = {
89 .name = "leds-gpio",
90 .id = -1,
91 .dev = {
92 .platform_data = &vp6500_leds_data,
93 },
94 };
95
96 static struct platform_device *platform_devices[] __initdata = {
97 &vp6500_nor_mtd_device,
98 &vp6500_leds_device,
99 };
100
101 static void __init vp6500_board_init(void)
102 {
103 mxc_gpio_setup_multiple_pins(vp6500_pins, ARRAY_SIZE(vp6500_pins),
104 "vp6500");
105
106 mxc_register_device(&mxc_uart_device0, NULL);
107
108 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
109 }
110
111 static void __init vp6500_timer_init(void)
112 {
113 mx21_clocks_init(32768, 26000000);
114 }
115
116 static struct sys_timer vp6500_timer = {
117 .init = vp6500_timer_init,
118 };
119
120 MACHINE_START(VP6500, "Phillips VP6500")
121 .phys_io = MX21_AIPI_BASE_ADDR,
122 .io_pg_offst = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
123 .boot_params = MX21_PHYS_OFFSET + 0x100,
124 .map_io = mx21_map_io,
125 .init_irq = mx21_init_irq,
126 .init_machine = vp6500_board_init,
127 .timer = &vp6500_timer,
128 MACHINE_END
This page took 0.054517 seconds and 5 git commands to generate.