3 Driver for the Marvell 8385 based compact flash WLAN cards.
5 (C) 2007 by Holger Schurig <hs4233@mail.mn-solutions.de>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; see the file COPYING. If not, write to
19 the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
20 Boston, MA 02110-1301, USA.
24 #include <linux/module.h>
25 #include <linux/delay.h>
26 #include <linux/moduleparam.h>
27 #include <linux/firmware.h>
28 #include <linux/netdevice.h>
30 #include <pcmcia/cs_types.h>
31 #include <pcmcia/cs.h>
32 #include <pcmcia/cistpl.h>
33 #include <pcmcia/ds.h>
37 #define DRV_NAME "libertas_cs"
44 /********************************************************************/
46 /********************************************************************/
48 MODULE_AUTHOR("Holger Schurig <hs4233@mail.mn-solutions.de>");
49 MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards");
50 MODULE_LICENSE("GPL");
54 /********************************************************************/
56 /********************************************************************/
59 struct pcmcia_device
*p_dev
;
60 struct lbs_private
*priv
;
66 /********************************************************************/
68 /********************************************************************/
70 /* This define enables wrapper functions which allow you
71 to dump all register accesses. You normally won't this,
72 except for development */
73 /* #define DEBUG_IO */
76 static int debug_output
= 0;
78 /* This way the compiler optimizes the printk's away */
79 #define debug_output 0
82 static inline unsigned int if_cs_read8(struct if_cs_card
*card
, uint reg
)
84 unsigned int val
= ioread8(card
->iobase
+ reg
);
86 printk(KERN_INFO
"inb %08x<%02x\n", reg
, val
);
89 static inline unsigned int if_cs_read16(struct if_cs_card
*card
, uint reg
)
91 unsigned int val
= ioread16(card
->iobase
+ reg
);
93 printk(KERN_INFO
"inw %08x<%04x\n", reg
, val
);
96 static inline void if_cs_read16_rep(
97 struct if_cs_card
*card
,
103 printk(KERN_INFO
"insw %08x<(0x%lx words)\n",
105 ioread16_rep(card
->iobase
+ reg
, buf
, count
);
108 static inline void if_cs_write8(struct if_cs_card
*card
, uint reg
, u8 val
)
111 printk(KERN_INFO
"outb %08x>%02x\n", reg
, val
);
112 iowrite8(val
, card
->iobase
+ reg
);
115 static inline void if_cs_write16(struct if_cs_card
*card
, uint reg
, u16 val
)
118 printk(KERN_INFO
"outw %08x>%04x\n", reg
, val
);
119 iowrite16(val
, card
->iobase
+ reg
);
122 static inline void if_cs_write16_rep(
123 struct if_cs_card
*card
,
129 printk(KERN_INFO
"outsw %08x>(0x%lx words)\n",
131 iowrite16_rep(card
->iobase
+ reg
, buf
, count
);
136 * I know that polling/delaying is frowned upon. However, this procedure
137 * with polling is needed while downloading the firmware. At this stage,
138 * the hardware does unfortunately not create any interrupts.
140 * Fortunately, this function is never used once the firmware is in
143 * As a reference, see the "Firmware Specification v5.1", page 18
144 * and 19. I did not follow their suggested timing to the word,
145 * but this works nice & fast anyway.
147 static int if_cs_poll_while_fw_download(struct if_cs_card
*card
, uint addr
, u8 reg
)
151 for (i
= 0; i
< 1000; i
++) {
152 u8 val
= if_cs_read8(card
, addr
);
162 /* Host control registers and their bit definitions */
164 #define IF_CS_H_STATUS 0x00000000
165 #define IF_CS_H_STATUS_TX_OVER 0x0001
166 #define IF_CS_H_STATUS_RX_OVER 0x0002
167 #define IF_CS_H_STATUS_DNLD_OVER 0x0004
169 #define IF_CS_H_INT_CAUSE 0x00000002
170 #define IF_CS_H_IC_TX_OVER 0x0001
171 #define IF_CS_H_IC_RX_OVER 0x0002
172 #define IF_CS_H_IC_DNLD_OVER 0x0004
173 #define IF_CS_H_IC_POWER_DOWN 0x0008
174 #define IF_CS_H_IC_HOST_EVENT 0x0010
175 #define IF_CS_H_IC_MASK 0x001f
177 #define IF_CS_H_INT_MASK 0x00000004
178 #define IF_CS_H_IM_MASK 0x001f
180 #define IF_CS_H_WRITE_LEN 0x00000014
182 #define IF_CS_H_WRITE 0x00000016
184 #define IF_CS_H_CMD_LEN 0x00000018
186 #define IF_CS_H_CMD 0x0000001A
188 #define IF_CS_C_READ_LEN 0x00000024
190 #define IF_CS_H_READ 0x00000010
192 /* Card control registers and their bit definitions */
194 #define IF_CS_C_STATUS 0x00000020
195 #define IF_CS_C_S_TX_DNLD_RDY 0x0001
196 #define IF_CS_C_S_RX_UPLD_RDY 0x0002
197 #define IF_CS_C_S_CMD_DNLD_RDY 0x0004
198 #define IF_CS_C_S_CMD_UPLD_RDY 0x0008
199 #define IF_CS_C_S_CARDEVENT 0x0010
200 #define IF_CS_C_S_MASK 0x001f
201 #define IF_CS_C_S_STATUS_MASK 0x7f00
203 #define IF_CS_C_INT_CAUSE 0x00000022
204 #define IF_CS_C_IC_MASK 0x001f
206 #define IF_CS_C_SQ_READ_LOW 0x00000028
207 #define IF_CS_C_SQ_HELPER_OK 0x10
209 #define IF_CS_C_CMD_LEN 0x00000030
211 #define IF_CS_C_CMD 0x00000012
213 #define IF_CS_SCRATCH 0x0000003F
217 /********************************************************************/
219 /********************************************************************/
222 * Called from if_cs_host_to_card to send a command to the hardware
224 static int if_cs_send_cmd(struct lbs_private
*priv
, u8
*buf
, u16 nb
)
226 struct if_cs_card
*card
= (struct if_cs_card
*)priv
->card
;
230 lbs_deb_enter(LBS_DEB_CS
);
232 /* Is hardware ready? */
234 u16 val
= if_cs_read16(card
, IF_CS_C_STATUS
);
235 if (val
& IF_CS_C_S_CMD_DNLD_RDY
)
238 lbs_pr_err("card not ready for commands\n");
244 if_cs_write16(card
, IF_CS_H_CMD_LEN
, nb
);
246 if_cs_write16_rep(card
, IF_CS_H_CMD
, buf
, nb
/ 2);
247 /* Are we supposed to transfer an odd amount of bytes? */
249 if_cs_write8(card
, IF_CS_H_CMD
, buf
[nb
-1]);
251 /* "Assert the download over interrupt command in the Host
252 * status register" */
253 if_cs_write16(card
, IF_CS_H_STATUS
, IF_CS_H_STATUS_DNLD_OVER
);
255 /* "Assert the download over interrupt command in the Card
256 * interrupt case register" */
257 if_cs_write16(card
, IF_CS_H_INT_CAUSE
, IF_CS_H_IC_DNLD_OVER
);
261 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d", ret
);
267 * Called from if_cs_host_to_card to send a data to the hardware
269 static void if_cs_send_data(struct lbs_private
*priv
, u8
*buf
, u16 nb
)
271 struct if_cs_card
*card
= (struct if_cs_card
*)priv
->card
;
273 lbs_deb_enter(LBS_DEB_CS
);
275 if_cs_write16(card
, IF_CS_H_WRITE_LEN
, nb
);
277 /* write even number of bytes, then odd byte if necessary */
278 if_cs_write16_rep(card
, IF_CS_H_WRITE
, buf
, nb
/ 2);
280 if_cs_write8(card
, IF_CS_H_WRITE
, buf
[nb
-1]);
282 if_cs_write16(card
, IF_CS_H_STATUS
, IF_CS_H_STATUS_TX_OVER
);
283 if_cs_write16(card
, IF_CS_H_INT_CAUSE
, IF_CS_H_STATUS_TX_OVER
);
285 lbs_deb_leave(LBS_DEB_CS
);
290 * Get the command result out of the card.
292 static int if_cs_receive_cmdres(struct lbs_private
*priv
, u8
*data
, u32
*len
)
298 lbs_deb_enter(LBS_DEB_CS
);
300 /* is hardware ready? */
301 val
= if_cs_read16(priv
->card
, IF_CS_C_STATUS
);
302 if ((val
& IF_CS_C_S_CMD_UPLD_RDY
) == 0) {
303 lbs_pr_err("card not ready for CMD\n");
307 *len
= if_cs_read16(priv
->card
, IF_CS_C_CMD_LEN
);
308 if ((*len
== 0) || (*len
> LBS_CMD_BUFFER_SIZE
)) {
309 lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len
);
313 /* read even number of bytes, then odd byte if necessary */
314 if_cs_read16_rep(priv
->card
, IF_CS_C_CMD
, data
, *len
/sizeof(u16
));
316 data
[*len
-1] = if_cs_read8(priv
->card
, IF_CS_C_CMD
);
318 /* This is a workaround for a firmware that reports too much
323 /* Clear this flag again */
324 spin_lock_irqsave(&priv
->driver_lock
, flags
);
325 priv
->dnld_sent
= DNLD_RES_RECEIVED
;
326 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
329 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d, len %d", ret
, *len
);
334 static struct sk_buff
*if_cs_receive_data(struct lbs_private
*priv
)
336 struct sk_buff
*skb
= NULL
;
340 lbs_deb_enter(LBS_DEB_CS
);
342 len
= if_cs_read16(priv
->card
, IF_CS_C_READ_LEN
);
343 if (len
== 0 || len
> MRVDRV_ETH_RX_PACKET_BUFFER_SIZE
) {
344 lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len
);
345 priv
->stats
.rx_dropped
++;
349 skb
= dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE
+ 2);
353 skb_reserve(skb
, 2);/* 16 byte align */
356 /* read even number of bytes, then odd byte if necessary */
357 if_cs_read16_rep(priv
->card
, IF_CS_H_READ
, data
, len
/sizeof(u16
));
359 data
[len
-1] = if_cs_read8(priv
->card
, IF_CS_H_READ
);
362 if_cs_write16(priv
->card
, IF_CS_H_STATUS
, IF_CS_H_STATUS_RX_OVER
);
363 if_cs_write16(priv
->card
, IF_CS_H_INT_CAUSE
, IF_CS_H_IC_RX_OVER
);
366 lbs_deb_leave_args(LBS_DEB_CS
, "ret %p", skb
);
372 /********************************************************************/
374 /********************************************************************/
376 static inline void if_cs_enable_ints(struct if_cs_card
*card
)
378 lbs_deb_enter(LBS_DEB_CS
);
379 if_cs_write16(card
, IF_CS_H_INT_MASK
, 0);
382 static inline void if_cs_disable_ints(struct if_cs_card
*card
)
384 lbs_deb_enter(LBS_DEB_CS
);
385 if_cs_write16(card
, IF_CS_H_INT_MASK
, IF_CS_H_IM_MASK
);
389 static irqreturn_t
if_cs_interrupt(int irq
, void *data
)
391 struct if_cs_card
*card
= data
;
392 struct lbs_private
*priv
= card
->priv
;
395 lbs_deb_enter(LBS_DEB_CS
);
397 cause
= if_cs_read16(card
, IF_CS_C_INT_CAUSE
);
398 if_cs_write16(card
, IF_CS_C_INT_CAUSE
, cause
& IF_CS_C_IC_MASK
);
400 lbs_deb_cs("cause 0x%04x\n", cause
);
406 if (cause
== 0xffff) {
407 /* Read in junk, the card has probably been removed */
408 card
->priv
->surpriseremoved
= 1;
412 /* TODO: I'm not sure what the best ordering is */
414 cause
= if_cs_read16(card
, IF_CS_C_STATUS
) & IF_CS_C_S_MASK
;
416 if (cause
& IF_CS_C_S_RX_UPLD_RDY
) {
418 lbs_deb_cs("rx packet\n");
419 skb
= if_cs_receive_data(priv
);
421 lbs_process_rxed_packet(priv
, skb
);
424 if (cause
& IF_CS_H_IC_TX_OVER
) {
425 lbs_deb_cs("tx over\n");
426 lbs_host_to_card_done(priv
);
429 if (cause
& IF_CS_C_S_CMD_UPLD_RDY
) {
433 lbs_deb_cs("cmd upload ready\n");
434 spin_lock_irqsave(&priv
->driver_lock
, flags
);
435 i
= (priv
->resp_idx
== 0) ? 1 : 0;
436 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
438 BUG_ON(priv
->resp_len
[i
]);
439 if_cs_receive_cmdres(priv
, priv
->resp_buf
[i
],
442 spin_lock_irqsave(&priv
->driver_lock
, flags
);
443 lbs_notify_command_response(priv
, i
);
444 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
447 if (cause
& IF_CS_H_IC_HOST_EVENT
) {
448 u16 event
= if_cs_read16(priv
->card
, IF_CS_C_STATUS
)
449 & IF_CS_C_S_STATUS_MASK
;
450 if_cs_write16(priv
->card
, IF_CS_H_INT_CAUSE
,
451 IF_CS_H_IC_HOST_EVENT
);
452 lbs_deb_cs("eventcause 0x%04x\n", event
);
453 lbs_queue_event(priv
, event
>> 8 & 0xff);
462 /********************************************************************/
464 /********************************************************************/
467 * Tries to program the helper firmware.
469 * Return 0 on success
471 static int if_cs_prog_helper(struct if_cs_card
*card
)
476 const struct firmware
*fw
;
478 lbs_deb_enter(LBS_DEB_CS
);
480 scratch
= if_cs_read8(card
, IF_CS_SCRATCH
);
482 /* "If the value is 0x5a, the firmware is already
483 * downloaded successfully"
488 /* "If the value is != 00, it is invalid value of register */
489 if (scratch
!= 0x00) {
494 /* TODO: make firmware file configurable */
495 ret
= request_firmware(&fw
, "libertas_cs_helper.fw",
496 &handle_to_dev(card
->p_dev
));
498 lbs_pr_err("can't load helper firmware\n");
502 lbs_deb_cs("helper size %td\n", fw
->size
);
504 /* "Set the 5 bytes of the helper image to 0" */
505 /* Not needed, this contains an ARM branch instruction */
508 /* "the number of bytes to send is 256" */
510 int remain
= fw
->size
- sent
;
515 /* "write the number of bytes to be sent to the I/O Command
516 * write length register" */
517 if_cs_write16(card
, IF_CS_H_CMD_LEN
, count
);
519 /* "write this to I/O Command port register as 16 bit writes */
521 if_cs_write16_rep(card
, IF_CS_H_CMD
,
525 /* "Assert the download over interrupt command in the Host
526 * status register" */
527 if_cs_write8(card
, IF_CS_H_STATUS
, IF_CS_H_STATUS_DNLD_OVER
);
529 /* "Assert the download over interrupt command in the Card
530 * interrupt case register" */
531 if_cs_write16(card
, IF_CS_H_INT_CAUSE
, IF_CS_H_IC_DNLD_OVER
);
533 /* "The host polls the Card Status register ... for 50 ms before
534 declaring a failure */
535 ret
= if_cs_poll_while_fw_download(card
, IF_CS_C_STATUS
,
536 IF_CS_C_S_CMD_DNLD_RDY
);
538 lbs_pr_err("can't download helper at 0x%x, ret %d\n",
549 release_firmware(fw
);
553 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d", ret
);
558 static int if_cs_prog_real(struct if_cs_card
*card
)
560 const struct firmware
*fw
;
566 lbs_deb_enter(LBS_DEB_CS
);
568 /* TODO: make firmware file configurable */
569 ret
= request_firmware(&fw
, "libertas_cs.fw",
570 &handle_to_dev(card
->p_dev
));
572 lbs_pr_err("can't load firmware\n");
576 lbs_deb_cs("fw size %td\n", fw
->size
);
578 ret
= if_cs_poll_while_fw_download(card
, IF_CS_C_SQ_READ_LOW
, IF_CS_C_SQ_HELPER_OK
);
580 lbs_pr_err("helper firmware doesn't answer\n");
584 for (sent
= 0; sent
< fw
->size
; sent
+= len
) {
585 len
= if_cs_read16(card
, IF_CS_C_SQ_READ_LOW
);
588 lbs_pr_info("odd, need to retry this firmware block\n");
594 lbs_pr_err("could not download firmware\n");
603 if_cs_write16(card
, IF_CS_H_CMD_LEN
, len
);
605 if_cs_write16_rep(card
, IF_CS_H_CMD
,
608 if_cs_write8(card
, IF_CS_H_STATUS
, IF_CS_H_STATUS_DNLD_OVER
);
609 if_cs_write16(card
, IF_CS_H_INT_CAUSE
, IF_CS_H_IC_DNLD_OVER
);
611 ret
= if_cs_poll_while_fw_download(card
, IF_CS_C_STATUS
,
612 IF_CS_C_S_CMD_DNLD_RDY
);
614 lbs_pr_err("can't download firmware at 0x%x\n", sent
);
619 ret
= if_cs_poll_while_fw_download(card
, IF_CS_SCRATCH
, 0x5a);
621 lbs_pr_err("firmware download failed\n");
630 release_firmware(fw
);
633 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d", ret
);
639 /********************************************************************/
640 /* Callback functions for libertas.ko */
641 /********************************************************************/
643 /* Send commands or data packets to the card */
644 static int if_cs_host_to_card(struct lbs_private
*priv
,
651 lbs_deb_enter_args(LBS_DEB_CS
, "type %d, bytes %d", type
, nb
);
655 priv
->dnld_sent
= DNLD_DATA_SENT
;
656 if_cs_send_data(priv
, buf
, nb
);
660 priv
->dnld_sent
= DNLD_CMD_SENT
;
661 ret
= if_cs_send_cmd(priv
, buf
, nb
);
664 lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__
, type
);
667 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d", ret
);
672 /********************************************************************/
674 /********************************************************************/
677 * After a card is removed, if_cs_release() will unregister the
678 * device, and release the PCMCIA configuration. If the device is
679 * still open, this will be postponed until it is closed.
681 static void if_cs_release(struct pcmcia_device
*p_dev
)
683 struct if_cs_card
*card
= p_dev
->priv
;
685 lbs_deb_enter(LBS_DEB_CS
);
687 free_irq(p_dev
->irq
.AssignedIRQ
, card
);
688 pcmcia_disable_device(p_dev
);
690 ioport_unmap(card
->iobase
);
692 lbs_deb_leave(LBS_DEB_CS
);
697 * This creates an "instance" of the driver, allocating local data
698 * structures for one device. The device is registered with Card
701 * The dev_link structure is initialized, but we don't actually
702 * configure the card at this point -- we wait until we receive a card
705 static int if_cs_probe(struct pcmcia_device
*p_dev
)
708 struct lbs_private
*priv
;
709 struct if_cs_card
*card
;
713 cistpl_cftable_entry_t
*cfg
= &parse
.cftable_entry
;
714 cistpl_io_t
*io
= &cfg
->io
;
717 lbs_deb_enter(LBS_DEB_CS
);
719 card
= kzalloc(sizeof(struct if_cs_card
), GFP_KERNEL
);
721 lbs_pr_err("error in kzalloc\n");
727 p_dev
->irq
.Attributes
= IRQ_TYPE_DYNAMIC_SHARING
;
728 p_dev
->irq
.Handler
= NULL
;
729 p_dev
->irq
.IRQInfo1
= IRQ_INFO2_VALID
| IRQ_LEVEL_ID
;
731 p_dev
->conf
.Attributes
= 0;
732 p_dev
->conf
.IntType
= INT_MEMORY_AND_IO
;
734 tuple
.Attributes
= 0;
735 tuple
.TupleData
= buf
;
736 tuple
.TupleDataMax
= sizeof(buf
);
737 tuple
.TupleOffset
= 0;
739 tuple
.DesiredTuple
= CISTPL_CFTABLE_ENTRY
;
740 if ((ret
= pcmcia_get_first_tuple(p_dev
, &tuple
)) != 0 ||
741 (ret
= pcmcia_get_tuple_data(p_dev
, &tuple
)) != 0 ||
742 (ret
= pcmcia_parse_tuple(p_dev
, &tuple
, &parse
)) != 0)
744 lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
748 p_dev
->conf
.ConfigIndex
= cfg
->index
;
750 /* Do we need to allocate an interrupt? */
751 if (cfg
->irq
.IRQInfo1
) {
752 p_dev
->conf
.Attributes
|= CONF_ENABLE_IRQ
;
755 /* IO window settings */
756 if (cfg
->io
.nwin
!= 1) {
757 lbs_pr_err("wrong CIS (check number of IO windows)\n");
761 p_dev
->io
.Attributes1
= IO_DATA_PATH_WIDTH_AUTO
;
762 p_dev
->io
.BasePort1
= io
->win
[0].base
;
763 p_dev
->io
.NumPorts1
= io
->win
[0].len
;
765 /* This reserves IO space but doesn't actually enable it */
766 ret
= pcmcia_request_io(p_dev
, &p_dev
->io
);
768 lbs_pr_err("error in pcmcia_request_io\n");
773 * Allocate an interrupt line. Note that this does not assign
774 * a handler to the interrupt, unless the 'Handler' member of
775 * the irq structure is initialized.
777 if (p_dev
->conf
.Attributes
& CONF_ENABLE_IRQ
) {
778 ret
= pcmcia_request_irq(p_dev
, &p_dev
->irq
);
780 lbs_pr_err("error in pcmcia_request_irq\n");
785 /* Initialize io access */
786 card
->iobase
= ioport_map(p_dev
->io
.BasePort1
, p_dev
->io
.NumPorts1
);
788 lbs_pr_err("error in ioport_map\n");
794 * This actually configures the PCMCIA socket -- setting up
795 * the I/O windows and the interrupt mapping, and putting the
796 * card and host interface into "Memory and IO" mode.
798 ret
= pcmcia_request_configuration(p_dev
, &p_dev
->conf
);
800 lbs_pr_err("error in pcmcia_request_configuration\n");
804 /* Finally, report what we've done */
805 lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
806 p_dev
->irq
.AssignedIRQ
, p_dev
->io
.BasePort1
,
807 p_dev
->io
.BasePort1
+ p_dev
->io
.NumPorts1
- 1);
810 /* Load the firmware early, before calling into libertas.ko */
811 ret
= if_cs_prog_helper(card
);
813 ret
= if_cs_prog_real(card
);
817 /* Make this card known to the libertas driver */
818 priv
= lbs_add_card(card
, &p_dev
->dev
);
824 /* Finish setting up fields in lbs_private */
827 priv
->hw_host_to_card
= if_cs_host_to_card
;
830 /* Now actually get the IRQ */
831 ret
= request_irq(p_dev
->irq
.AssignedIRQ
, if_cs_interrupt
,
832 IRQF_SHARED
, DRV_NAME
, card
);
834 lbs_pr_err("error in request_irq\n");
838 /* Clear any interrupt cause that happend while sending
839 * firmware/initializing card */
840 if_cs_write16(card
, IF_CS_C_INT_CAUSE
, IF_CS_C_IC_MASK
);
841 if_cs_enable_ints(card
);
843 /* And finally bring the card up */
844 if (lbs_start_card(priv
) != 0) {
845 lbs_pr_err("could not activate card\n");
849 /* The firmware for the CF card supports powersave */
850 priv
->ps_supported
= 1;
856 lbs_remove_card(priv
);
858 ioport_unmap(card
->iobase
);
860 pcmcia_disable_device(p_dev
);
862 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d", ret
);
868 * This deletes a driver "instance". The device is de-registered with
869 * Card Services. If it has been released, all local data structures
870 * are freed. Otherwise, the structures will be freed when the device
873 static void if_cs_detach(struct pcmcia_device
*p_dev
)
875 struct if_cs_card
*card
= p_dev
->priv
;
877 lbs_deb_enter(LBS_DEB_CS
);
879 lbs_stop_card(card
->priv
);
880 lbs_remove_card(card
->priv
);
881 if_cs_disable_ints(card
);
882 if_cs_release(p_dev
);
885 lbs_deb_leave(LBS_DEB_CS
);
890 /********************************************************************/
891 /* Module initialization */
892 /********************************************************************/
894 static struct pcmcia_device_id if_cs_ids
[] = {
895 PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103),
898 MODULE_DEVICE_TABLE(pcmcia
, if_cs_ids
);
901 static struct pcmcia_driver lbs_driver
= {
902 .owner
= THIS_MODULE
,
906 .probe
= if_cs_probe
,
907 .remove
= if_cs_detach
,
908 .id_table
= if_cs_ids
,
912 static int __init
if_cs_init(void)
916 lbs_deb_enter(LBS_DEB_CS
);
917 ret
= pcmcia_register_driver(&lbs_driver
);
918 lbs_deb_leave(LBS_DEB_CS
);
923 static void __exit
if_cs_exit(void)
925 lbs_deb_enter(LBS_DEB_CS
);
926 pcmcia_unregister_driver(&lbs_driver
);
927 lbs_deb_leave(LBS_DEB_CS
);
931 module_init(if_cs_init
);
932 module_exit(if_cs_exit
);