target/linux/ramips/patches-2.6.37/101-rt288x_serial_driver_hack.patch

   1 --- a/drivers/serial/8250.c
   2 +++ b/drivers/serial/8250.c
   3 @@ -305,9 +305,9 @@ static const struct serial8250_config ua
   4         },
   5  };
   6
   7 -#if defined(CONFIG_MIPS_ALCHEMY)
   8 +#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
   9
  10 -/* Au1x00 UART hardware has a weird register layout */
  11 +/* Au1x00 and RT288x UART hardware has a weird register layout */
  12  static const u8 au_io_in_map[] = {
  13         [UART_RX]  = 0,
  14         [UART_IER] = 2,
  15 @@ -571,8 +571,8 @@ static inline void _serial_dl_write(stru
  16         serial_outp(up, UART_DLM, value >> 8 & 0xff);
  17  }
  18
  19 -#if defined(CONFIG_MIPS_ALCHEMY)
  20 -/* Au1x00 haven't got a standard divisor latch */
  21 +#if defined(CONFIG_MIPS_ALCHEMY) || defined (CONFIG_SERIAL_8250_RT288X)
  22 +/* Au1x00 and RT288x haven't got a standard divisor latch */
  23  static int serial_dl_read(struct uart_8250_port *up)
  24  {
  25         if (up->port.iotype == UPIO_AU)
  26 @@ -779,22 +779,19 @@ static int size_fifo(struct uart_8250_po
  27   */
  28  static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
  29  {
  30 -       unsigned char old_dll, old_dlm, old_lcr;
  31 +       unsigned char old_lcr;
  32 +       unsigned int old_dl;
  33         unsigned int id;
  34
  35         old_lcr = serial_inp(p, UART_LCR);
  36         serial_outp(p, UART_LCR, UART_LCR_DLAB);
  37
  38 -       old_dll = serial_inp(p, UART_DLL);
  39 -       old_dlm = serial_inp(p, UART_DLM);
  40 +       old_dl = serial_dl_read(p);
  41
  42 -       serial_outp(p, UART_DLL, 0);
  43 -       serial_outp(p, UART_DLM, 0);
  44 +       serial_dl_write(p, 0);
  45 +       id = serial_dl_read(p);
  46
  47 -       id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
  48 -
  49 -       serial_outp(p, UART_DLL, old_dll);
  50 -       serial_outp(p, UART_DLM, old_dlm);
  51 +       serial_dl_write(p, old_dl);
  52         serial_outp(p, UART_LCR, old_lcr);
  53
  54         return id;
  55 --- a/drivers/serial/Kconfig
  56 +++ b/drivers/serial/Kconfig
  57 @@ -258,6 +258,14 @@ config SERIAL_8250_ACORN
  58           system, say Y to this option.  The driver can handle 1, 2, or 3 port
  59           cards.  If unsure, say N.
  60
  61 +config SERIAL_8250_RT288X
  62 +       bool "Ralink RT288x/RT305x serial port support"
  63 +       depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
  64 +       help
  65 +         If you have a Ralink RT288x/RT305x SoC based board and want to use the
  66 +         serial port, say Y to this option. The driver can handle up to 2 serial
  67 +         ports. If unsure, say N.
  68 +
  69  config SERIAL_8250_RM9K
  70         bool "Support for MIPS RM9xxx integrated serial port"
  71         depends on SERIAL_8250 != n && SERIAL_RM9000
  72 --- a/include/linux/serial_core.h
  73 +++ b/include/linux/serial_core.h
  74 @@ -307,7 +307,7 @@ struct uart_port {
  75  #define UPIO_HUB6              (1)
  76  #define UPIO_MEM               (2)
  77  #define UPIO_MEM32             (3)
  78 -#define UPIO_AU                        (4)                     /* Au1x00 type IO */
  79 +#define UPIO_AU                        (4)                     /* Au1x00 and RT288x type IO */
  80  #define UPIO_TSI               (5)                     /* Tsi108/109 type IO */
  81  #define UPIO_DWAPB             (6)                     /* DesignWare APB UART */
  82  #define UPIO_RM9000            (7)                     /* RM9000 type IO */