cosmetic fix for irq error messages
[openwrt.git] / target / linux / aruba-2.6 / patches / 001-flash.patch
1 diff -Nur linux-2.6.15/arch/mips/aruba/flash_lock.c linux-2.6.15-openwrt/arch/mips/aruba/flash_lock.c
2 --- linux-2.6.15/arch/mips/aruba/flash_lock.c 1970-01-01 01:00:00.000000000 +0100
3 +++ linux-2.6.15-openwrt/arch/mips/aruba/flash_lock.c 2006-01-10 00:32:32.000000000 +0100
4 @@ -0,0 +1,27 @@
5 +#include <linux/module.h>
6 +#include <linux/types.h>
7 +#include <asm/bootinfo.h>
8 +
9 +#define AP70_PROT_ADDR 0xb8010008
10 +#define AP70_PROT_DATA 0x8
11 +#define AP60_PROT_ADDR 0xB8400000
12 +#define AP60_PROT_DATA 0x04000000
13 +
14 +void unlock_ap60_70_flash(void)
15 +{
16 + volatile __u32 val;
17 + switch (mips_machtype) {
18 + case MACH_ARUBA_AP70:
19 + val = *(volatile __u32 *)AP70_PROT_ADDR;
20 + val &= ~(AP70_PROT_DATA);
21 + *(volatile __u32 *)AP70_PROT_ADDR = val;
22 + break;
23 + case MACH_ARUBA_AP65:
24 + case MACH_ARUBA_AP60:
25 + default:
26 + val = *(volatile __u32 *)AP60_PROT_ADDR;
27 + val &= ~(AP60_PROT_DATA);
28 + *(volatile __u32 *)AP60_PROT_ADDR = val;
29 + break;
30 + }
31 +}
32 diff -Nur linux-2.6.15/drivers/mtd/chips/cfi_probe.c linux-2.6.15-openwrt/drivers/mtd/chips/cfi_probe.c
33 --- linux-2.6.15/drivers/mtd/chips/cfi_probe.c 2006-01-03 04:21:10.000000000 +0100
34 +++ linux-2.6.15-openwrt/drivers/mtd/chips/cfi_probe.c 2006-01-10 00:32:32.000000000 +0100
35 @@ -26,6 +26,74 @@
36 static void print_cfi_ident(struct cfi_ident *);
37 #endif
38
39 +#if 1
40 +
41 +#define AMD_AUTOSEL_OFF1 0xAAA
42 +#define AMD_AUTOSEL_OFF2 0x555
43 +#define AMD_MANUF_ID 0x1
44 +#define AMD_DEVICE_ID1 0xF6 /* T */
45 +#define AMD_DEVICE_ID2 0xF9 /* B */
46 +/* Foll. are definitions for Macronix Flash Part */
47 +#define MCX_MANUF_ID 0xC2
48 +#define MCX_DEVICE_ID1 0xA7
49 +#define MCX_DEVICE_ID2 0xA8
50 +/* Foll. common to both AMD and Macronix */
51 +#define FACTORY_LOCKED 0x99
52 +#define USER_LOCKED 0x19
53 +
54 +/* NOTE: AP-70/6x use BYTE mode flash access. Therefore the
55 + * lowest Addr. pin in the flash is not A0 but A-1 (A minus 1).
56 + * CPU's A0 is tied to Flash's A-1, A1 to A0 and so on. This
57 + * gives 4MB of byte-addressable mem. In byte mode, all addr
58 + * need to be multiplied by 2 (i.e compared to word mode).
59 + * NOTE: AMD_AUTOSEL_OFF1 and OFF2 are already mult. by 2
60 + * Just blindly use the addr offsets suggested in the manual
61 + * for byte mode and you'll be OK. Offs. in Table 6 need to
62 + * be mult by 2 (for getting autosel params)
63 + */
64 +void
65 +flash_detect(struct map_info *map, __u32 base, struct cfi_private *cfi)
66 +{
67 + map_word val[3];
68 + int osf = cfi->interleave * cfi->device_type; // =2 for AP70/6x
69 + char *manuf, *part, *lock ;
70 +
71 + if (osf != 1) return ;
72 +
73 + cfi_send_gen_cmd(0xAA, AMD_AUTOSEL_OFF1, base, map, cfi, cfi->device_type, NULL);
74 + cfi_send_gen_cmd(0x55, AMD_AUTOSEL_OFF2, base, map, cfi, cfi->device_type, NULL);
75 + cfi_send_gen_cmd(0x90, AMD_AUTOSEL_OFF1, base, map, cfi, cfi->device_type, NULL);
76 + val[0] = map_read(map, base) ; // manuf ID
77 + val[1] = map_read(map, base+2) ; // device ID
78 + val[2] = map_read(map, base+6) ; // lock indicator
79 +#if 0
80 +printk("v1=0x%x v2=0x%x v3=0x%x\n", val[0], val[1], val[2]) ;
81 +#endif
82 + if (val[0].x[0] == AMD_MANUF_ID) {
83 + manuf = "AMD Flash" ;
84 + if (val[1].x[0] == AMD_DEVICE_ID1)
85 + part = "AM29LV320D (Top)" ;
86 + else if (val[1].x[0] == AMD_DEVICE_ID2)
87 + part = "AM29LV320D (Bot)" ;
88 + else part = "Unknown" ;
89 + } else if (val[0].x[0] == MCX_MANUF_ID) {
90 + manuf = "Macronix Flash" ;
91 + if (val[1].x[0] == MCX_DEVICE_ID1)
92 + part = "MX29LV320A (Top)" ;
93 + else if (val[1].x[0] == MCX_DEVICE_ID2)
94 + part = "MX29LV320A (Bot)" ;
95 + else part = "Unknown" ;
96 + } else
97 + return ;
98 + if (val[2].x[0] == FACTORY_LOCKED)
99 + lock = "Factory Locked" ;
100 + else if (val[2].x[0] == USER_LOCKED)
101 + lock = "User Locked" ;
102 + else lock = "Unknown locking" ;
103 + printk("%s %s (%s)\n", manuf, part, lock) ;
104 +}
105 +#endif
106 +
107 static int cfi_probe_chip(struct map_info *map, __u32 base,
108 unsigned long *chip_map, struct cfi_private *cfi);
109 static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
110 @@ -118,6 +186,10 @@
111 }
112
113 xip_disable();
114 +#if 1
115 + //cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
116 + flash_detect(map, base, cfi) ;
117 +#endif
118 cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
119 cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
120 cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
121 diff -Nur linux-2.6.15/drivers/mtd/maps/physmap.c linux-2.6.15-openwrt/drivers/mtd/maps/physmap.c
122 --- linux-2.6.15/drivers/mtd/maps/physmap.c 2006-01-03 04:21:10.000000000 +0100
123 +++ linux-2.6.15-openwrt/drivers/mtd/maps/physmap.c 2006-01-10 00:32:32.000000000 +0100
124 @@ -34,15 +34,31 @@
125 static struct mtd_partition *mtd_parts;
126 static int mtd_parts_nb;
127
128 -static int num_physmap_partitions;
129 -static struct mtd_partition *physmap_partitions;
130 +static int num_physmap_partitions = 3;
131 +static struct mtd_partition physmap_partitions[] = {
132 + {
133 + name: "zImage",
134 + size: 0x3f0000-0x80000,
135 + offset: 0x80000,
136 + },
137 + {
138 + name: "JFFS2",
139 + size: 0x3f0000-0x120000,
140 + offset: 0x120000,
141 + },
142 + {
143 + name: "NVRAM",
144 + size: 0x2000,
145 + offset: 0x3f8000,
146 + }
147 +};
148
149 static const char *part_probes[] __initdata = {"cmdlinepart", "RedBoot", NULL};
150
151 void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
152 {
153 - physmap_partitions=parts;
154 - num_physmap_partitions=num_parts;
155 +// physmap_partitions=parts;
156 +// num_physmap_partitions=num_parts;
157 }
158 #endif /* CONFIG_MTD_PARTITIONS */
159
This page took 0.047628 seconds and 5 git commands to generate.