target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch

   1 This patch adds support for the D-Link DSM-G600 Rev A.
   2 This is an ARM XScale IXP4xx system relatively similar to
   3 the NSLU2 and NAS-100D already supported by mainline. An
   4 important difference is Gigabit Ethernet support using
   5 the Via Velocity chipset.
   6
   7 This patch is the combined work of Michael Westerhof and
   8 Alessandro Zummo, with contributions from Michael-Luke
   9 Jones. This version addresses review comments from rmk
  10 and Deepak Saxena.
  11
  12 Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
  13 Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
  14 Signed-off-by: Michael Westerhof <mwester@dls.net>
  15
  16 ---
  17  arch/arm/mach-ixp4xx/Kconfig           |    9 +
  18  arch/arm/mach-ixp4xx/Makefile          |    2
  19  arch/arm/mach-ixp4xx/dsmg600-pci.c     |   74 +++++++++++++
  20  arch/arm/mach-ixp4xx/dsmg600-power.c   |  130 ++++++++++++++++++++++++
  21  arch/arm/mach-ixp4xx/dsmg600-setup.c   |  175 +++++++++++++++++++++++++++++++++
  22  include/asm-arm/arch-ixp4xx/dsmg600.h  |   57 ++++++++++
  23  include/asm-arm/arch-ixp4xx/hardware.h |    1
  24  include/asm-arm/arch-ixp4xx/irqs.h     |   10 +
  25  8 files changed, 458 insertions(+)
  26
  27 Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Kconfig
  28 ===================================================================
  29 --- linux-2.6.21.1-armeb.orig/arch/arm/mach-ixp4xx/Kconfig
  30 +++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Kconfig
  31 @@ -89,6 +89,15 @@
  32           NAS 100d device. For more information on this platform,
  33           see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
  34
  35 +config MACH_DSMG600
  36 +       bool
  37 +       prompt "D-Link DSM-G600 RevA"
  38 +       select PCI
  39 +       help
  40 +         Say 'Y' here if you want your kernel to support D-Link's
  41 +         DSM-G600 RevA device. For more information on this platform,
  42 +         see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
  43 +
  44  #
  45  # Avila and IXDP share the same source for now. Will change in future
  46  #
  47 Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Makefile
  48 ===================================================================
  49 --- linux-2.6.21.1-armeb.orig/arch/arm/mach-ixp4xx/Makefile
  50 +++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Makefile
  51 @@ -12,6 +12,7 @@
  52  obj-pci-$(CONFIG_MACH_GTWX5715)                += gtwx5715-pci.o
  53  obj-pci-$(CONFIG_MACH_NSLU2)           += nslu2-pci.o
  54  obj-pci-$(CONFIG_MACH_NAS100D)         += nas100d-pci.o
  55 +obj-pci-$(CONFIG_MACH_DSMG600)         += dsmg600-pci.o
  56
  57  obj-y  += common.o
  58
  59 @@ -22,5 +23,6 @@
  60  obj-$(CONFIG_MACH_GTWX5715)    += gtwx5715-setup.o
  61  obj-$(CONFIG_MACH_NSLU2)       += nslu2-setup.o nslu2-power.o
  62  obj-$(CONFIG_MACH_NAS100D)     += nas100d-setup.o nas100d-power.o
  63 +obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
  64
  65  obj-$(CONFIG_PCI)              += $(obj-pci-$(CONFIG_PCI)) common-pci.o
  66 Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-pci.c
  67 ===================================================================
  68 --- /dev/null
  69 +++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-pci.c
  70 @@ -0,0 +1,74 @@
  71 +/*
  72 + * DSM-G600 board-level PCI initialization
  73 + *
  74 + * Copyright (C) 2006 Tower Technologies
  75 + * Author: Alessandro Zummo <a.zummo@towertech.it>
  76 + *
  77 + * based on ixdp425-pci.c:
  78 + *     Copyright (C) 2002 Intel Corporation.
  79 + *     Copyright (C) 2003-2004 MontaVista Software, Inc.
  80 + *
  81 + * Maintainer: http://www.nslu2-linux.org/
  82 + *
  83 + * This program is free software; you can redistribute it and/or modify
  84 + * it under the terms of the GNU General Public License version 2 as
  85 + * published by the Free Software Foundation.
  86 + *
  87 + */
  88 +
  89 +#include <linux/pci.h>
  90 +#include <linux/init.h>
  91 +#include <linux/irq.h>
  92 +
  93 +#include <asm/mach/pci.h>
  94 +#include <asm/mach-types.h>
  95 +
  96 +void __init dsmg600_pci_preinit(void)
  97 +{
  98 +       set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
  99 +       set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
 100 +       set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
 101 +       set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
 102 +       set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
 103 +       set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
 104 +
 105 +       ixp4xx_pci_preinit();
 106 +}
 107 +
 108 +static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 109 +{
 110 +       static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] =
 111 +       {
 112 +               { IRQ_DSMG600_PCI_INTE, -1, -1 },
 113 +               { IRQ_DSMG600_PCI_INTA, -1, -1 },
 114 +               { IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD },
 115 +               { IRQ_DSMG600_PCI_INTF, -1, -1 },
 116 +       };
 117 +
 118 +       int irq = -1;
 119 +
 120 +       if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV &&
 121 +               pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES)
 122 +               irq = pci_irq_table[slot-1][pin-1];
 123 +
 124 +       return irq;
 125 +}
 126 +
 127 +struct hw_pci __initdata dsmg600_pci = {
 128 +       .nr_controllers = 1,
 129 +       .preinit        = dsmg600_pci_preinit,
 130 +       .swizzle        = pci_std_swizzle,
 131 +       .setup          = ixp4xx_setup,
 132 +       .scan           = ixp4xx_scan_bus,
 133 +       .map_irq        = dsmg600_map_irq,
 134 +};
 135 +
 136 +int __init dsmg600_pci_init(void)
 137 +{
 138 +       if (machine_is_dsmg600())
 139 +               pci_common_init(&dsmg600_pci);
 140 +
 141 +       return 0;
 142 +}
 143 +
 144 +subsys_initcall(dsmg600_pci_init);
 145 Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
 146 ===================================================================
 147 --- /dev/null
 148 +++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
 149 @@ -0,0 +1,130 @@
 150 +/*
 151 + * arch/arm/mach-ixp4xx/dsmg600-power.c
 152 + *
 153 + * DSM-G600 Power/Reset driver
 154 + * Author: Michael Westerhof <mwester@dls.net>
 155 + *
 156 + * Based on nslu2-power.c
 157 + *  Copyright (C) 2005 Tower Technologies
 158 + *  Author: Alessandro Zummo <a.zummo@towertech.it>
 159 + *
 160 + * which was based on nslu2-io.c
 161 + *  Copyright (C) 2004 Karen Spearel
 162 + *
 163 + * Maintainers: http://www.nslu2-linux.org/
 164 + *
 165 + * This program is free software; you can redistribute it and/or modify
 166 + * it under the terms of the GNU General Public License version 2 as
 167 + * published by the Free Software Foundation.
 168 + *
 169 + */
 170 +
 171 +#include <linux/module.h>
 172 +#include <linux/reboot.h>
 173 +#include <linux/interrupt.h>
 174 +#include <linux/irq.h>
 175 +#include <linux/jiffies.h>
 176 +#include <linux/timer.h>
 177 +
 178 +#include <asm/mach-types.h>
 179 +
 180 +extern void ctrl_alt_del(void);
 181 +
 182 +/* This is used to make sure the power-button pusher is serious.  The button
 183 + * must be held until the value of this counter reaches zero.
 184 + */
 185 +static volatile int power_button_countdown;
 186 +
 187 +/* Must hold the button down for at least this many counts to be processed */
 188 +#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
 189 +
 190 +static void dsmg600_power_handler(unsigned long data);
 191 +static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
 192 +
 193 +static void dsmg600_power_handler(unsigned long data)
 194 +{
 195 +       /* This routine is called twice per second to check the
 196 +        * state of the power button.
 197 +        */
 198 +
 199 +       if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
 200 +
 201 +               /* IO Pin is 1 (button pushed) */
 202 +               if (power_button_countdown > 0) {
 203 +                       power_button_countdown--;
 204 +               }
 205 +
 206 +       } else {
 207 +
 208 +               /* Done on button release, to allow for auto-power-on mods. */
 209 +               if (power_button_countdown == 0) {
 210 +                       /* Signal init to do the ctrlaltdel action, this will bypass
 211 +                        * init if it hasn't started and do a kernel_restart.
 212 +                        */
 213 +                       ctrl_alt_del();
 214 +
 215 +                       /* Change the state of the power LED to "blink" */
 216 +                       gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
 217 +               } else {
 218 +                       power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
 219 +               }
 220 +       }
 221 +
 222 +       mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
 223 +}
 224 +
 225 +static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
 226 +{
 227 +       /* This is the paper-clip reset, it shuts the machine down directly. */
 228 +       machine_power_off();
 229 +
 230 +       return IRQ_HANDLED;
 231 +}
 232 +
 233 +static int __init dsmg600_power_init(void)
 234 +{
 235 +       if (!(machine_is_dsmg600()))
 236 +               return 0;
 237 +
 238 +       if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
 239 +               IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
 240 +               NULL) < 0) {
 241 +
 242 +               printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
 243 +                       DSMG600_RB_IRQ);
 244 +
 245 +               return -EIO;
 246 +       }
 247 +
 248 +       /* The power button on the D-Link DSM-G600 is on GPIO 15, but
 249 +        * it cannot handle interrupts on that GPIO line.  So we'll
 250 +        * have to poll it with a kernel timer.
 251 +        */
 252 +
 253 +       /* Make sure that the power button GPIO is set up as an input */
 254 +       gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
 255 +
 256 +       /* Set the initial value for the power button IRQ handler */
 257 +       power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
 258 +
 259 +       mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
 260 +
 261 +       return 0;
 262 +}
 263 +
 264 +static void __exit dsmg600_power_exit(void)
 265 +{
 266 +       if (!(machine_is_dsmg600()))
 267 +               return;
 268 +
 269 +       del_timer_sync(&dsmg600_power_timer);
 270 +
 271 +       free_irq(DSMG600_RB_IRQ, NULL);
 272 +}
 273 +
 274 +module_init(dsmg600_power_init);
 275 +module_exit(dsmg600_power_exit);
 276 +
 277 +MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>");
 278 +MODULE_DESCRIPTION("DSM-G600 Power/Reset driver");
 279 +MODULE_LICENSE("GPL");
 280 Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c
 281 ===================================================================
 282 --- /dev/null
 283 +++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c
 284 @@ -0,0 +1,175 @@
 285 +/*
 286 + * DSM-G600 board-setup
 287 + *
 288 + * Copyright (C) 2006 Tower Technologies
 289 + * Author: Alessandro Zummo <a.zummo@towertech.it>
 290 + *
 291 + * based ixdp425-setup.c:
 292 + *      Copyright (C) 2003-2004 MontaVista Software, Inc.
 293 + *
 294 + * Author: Alessandro Zummo <a.zummo@towertech.it>
 295 + * Maintainers: http://www.nslu2-linux.org/
 296 + */
 297 +
 298 +#include <linux/kernel.h>
 299 +#include <linux/serial.h>
 300 +#include <linux/serial_8250.h>
 301 +
 302 +#include <asm/mach-types.h>
 303 +#include <asm/mach/arch.h>
 304 +#include <asm/mach/flash.h>
 305 +
 306 +static struct flash_platform_data dsmg600_flash_data = {
 307 +       .map_name               = "cfi_probe",
 308 +       .width                  = 2,
 309 +};
 310 +
 311 +static struct resource dsmg600_flash_resource = {
 312 +       .flags                  = IORESOURCE_MEM,
 313 +};
 314 +
 315 +static struct platform_device dsmg600_flash = {
 316 +       .name                   = "IXP4XX-Flash",
 317 +       .id                     = 0,
 318 +       .dev.platform_data      = &dsmg600_flash_data,
 319 +       .num_resources          = 1,
 320 +       .resource               = &dsmg600_flash_resource,
 321 +};
 322 +
 323 +static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
 324 +       .sda_pin                = DSMG600_SDA_PIN,
 325 +       .scl_pin                = DSMG600_SCL_PIN,
 326 +};
 327 +
 328 +static struct platform_device dsmg600_i2c_controller = {
 329 +       .name                   = "IXP4XX-I2C",
 330 +       .id                     = 0,
 331 +       .dev.platform_data      = &dsmg600_i2c_gpio_pins,
 332 +};
 333 +
 334 +#ifdef CONFIG_LEDS_CLASS
 335 +static struct resource dsmg600_led_resources[] = {
 336 +       {
 337 +               .name           = "power",
 338 +               .start          = DSMG600_LED_PWR_GPIO,
 339 +               .end            = DSMG600_LED_PWR_GPIO,
 340 +               .flags          = IXP4XX_GPIO_HIGH,
 341 +       },
 342 +       {
 343 +               .name           = "wlan",
 344 +               .start          = DSMG600_LED_WLAN_GPIO,
 345 +               .end            = DSMG600_LED_WLAN_GPIO,
 346 +               .flags          = IXP4XX_GPIO_LOW,
 347 +       },
 348 +};
 349 +
 350 +static struct platform_device dsmg600_leds = {
 351 +        .name                   = "IXP4XX-GPIO-LED",
 352 +        .id                     = -1,
 353 +        .num_resources          = ARRAY_SIZE(dsmg600_led_resources),
 354 +        .resource               = dsmg600_led_resources,
 355 +};
 356 +#endif
 357 +
 358 +static struct resource dsmg600_uart_resources[] = {
 359 +       {
 360 +               .start          = IXP4XX_UART1_BASE_PHYS,
 361 +               .end            = IXP4XX_UART1_BASE_PHYS + 0x0fff,
 362 +               .flags          = IORESOURCE_MEM,
 363 +       },
 364 +       {
 365 +               .start          = IXP4XX_UART2_BASE_PHYS,
 366 +               .end            = IXP4XX_UART2_BASE_PHYS + 0x0fff,
 367 +               .flags          = IORESOURCE_MEM,
 368 +       }
 369 +};
 370 +
 371 +static struct plat_serial8250_port dsmg600_uart_data[] = {
 372 +       {
 373 +               .mapbase        = IXP4XX_UART1_BASE_PHYS,
 374 +               .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 375 +               .irq            = IRQ_IXP4XX_UART1,
 376 +               .flags          = UPF_BOOT_AUTOCONF,
 377 +               .iotype         = UPIO_MEM,
 378 +               .regshift       = 2,
 379 +               .uartclk        = IXP4XX_UART_XTAL,
 380 +       },
 381 +       {
 382 +               .mapbase        = IXP4XX_UART2_BASE_PHYS,
 383 +               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 384 +               .irq            = IRQ_IXP4XX_UART2,
 385 +               .flags          = UPF_BOOT_AUTOCONF,
 386 +               .iotype         = UPIO_MEM,
 387 +               .regshift       = 2,
 388 +               .uartclk        = IXP4XX_UART_XTAL,
 389 +       },
 390 +       { }
 391 +};
 392 +
 393 +static struct platform_device dsmg600_uart = {
 394 +       .name                   = "serial8250",
 395 +       .id                     = PLAT8250_DEV_PLATFORM,
 396 +       .dev.platform_data      = dsmg600_uart_data,
 397 +       .num_resources          = ARRAY_SIZE(dsmg600_uart_resources),
 398 +       .resource               = dsmg600_uart_resources,
 399 +};
 400 +
 401 +static struct platform_device *dsmg600_devices[] __initdata = {
 402 +       &dsmg600_i2c_controller,
 403 +       &dsmg600_flash,
 404 +};
 405 +
 406 +static void dsmg600_power_off(void)
 407 +{
 408 +       /* enable the pwr cntl gpio */
 409 +       gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
 410 +
 411 +       /* poweroff */
 412 +       gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
 413 +}
 414 +
 415 +static void __init dsmg600_init(void)
 416 +{
 417 +       ixp4xx_sys_init();
 418 +
 419 +       /* Make sure that GPIO14 and GPIO15 are not used as clocks */
 420 +       *IXP4XX_GPIO_GPCLKR = 0;
 421 +
 422 +       dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 423 +       dsmg600_flash_resource.end =
 424 +               IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 425 +
 426 +       pm_power_off = dsmg600_power_off;
 427 +
 428 +       /* The UART is required on the DSM-G600 (Redboot cannot use the
 429 +        * NIC) -- do it here so that it does *not* get removed if
 430 +        * platform_add_devices fails!
 431 +         */
 432 +        (void)platform_device_register(&dsmg600_uart);
 433 +
 434 +       platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
 435 +
 436 +#ifdef CONFIG_LEDS_CLASS
 437 +        /* We don't care whether or not this works. */
 438 +        (void)platform_device_register(&dsmg600_leds);
 439 +#endif
 440 +}
 441 +
 442 +static void __init dsmg600_fixup(struct machine_desc *desc,
 443 +                struct tag *tags, char **cmdline, struct meminfo *mi)
 444 +{
 445 +       /* The xtal on this machine is non-standard. */
 446 +        ixp4xx_timer_freq = DSMG600_FREQ;
 447 +}
 448 +
 449 +MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 450 +       /* Maintainer: www.nslu2-linux.org */
 451 +       .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
 452 +       .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 453 +       .boot_params    = 0x00000100,
 454 +       .fixup          = dsmg600_fixup,
 455 +       .map_io         = ixp4xx_map_io,
 456 +       .init_irq       = ixp4xx_init_irq,
 457 +       .timer          = &ixp4xx_timer,
 458 +       .init_machine   = dsmg600_init,
 459 +MACHINE_END
 460 Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h
 461 ===================================================================
 462 --- /dev/null
 463 +++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h
 464 @@ -0,0 +1,57 @@
 465 +/*
 466 + * DSM-G600 platform specific definitions
 467 + *
 468 + * Copyright (C) 2006 Tower Technologies
 469 + * Author: Alessandro Zummo <a.zummo@towertech.it>
 470 + *
 471 + * based on ixdp425.h:
 472 + *     Copyright 2004 (C) MontaVista, Software, Inc.
 473 + *
 474 + * This file is licensed under  the terms of the GNU General Public
 475 + * License version 2. This program is licensed "as is" without any
 476 + * warranty of any kind, whether express or implied.
 477 + */
 478 +
 479 +#ifndef __ASM_ARCH_HARDWARE_H__
 480 +#error "Do not include this directly, instead #include <asm/hardware.h>"
 481 +#endif
 482 +
 483 +#define DSMG600_SDA_PIN                5
 484 +#define DSMG600_SCL_PIN                4
 485 +
 486 +/*
 487 + * DSMG600 PCI IRQs
 488 + */
 489 +#define DSMG600_PCI_MAX_DEV    4
 490 +#define DSMG600_PCI_IRQ_LINES  3
 491 +
 492 +
 493 +/* PCI controller GPIO to IRQ pin mappings */
 494 +#define DSMG600_PCI_INTA_PIN   11
 495 +#define DSMG600_PCI_INTB_PIN   10
 496 +#define DSMG600_PCI_INTC_PIN   9
 497 +#define DSMG600_PCI_INTD_PIN   8
 498 +#define DSMG600_PCI_INTE_PIN   7
 499 +#define DSMG600_PCI_INTF_PIN   6
 500 +
 501 +/* DSM-G600 Timer Setting */
 502 +#define DSMG600_FREQ 66000000
 503 +
 504 +/* Buttons */
 505 +
 506 +#define DSMG600_PB_GPIO                15      /* power button */
 507 +#define DSMG600_PB_BM          (1L << DSMG600_PB_GPIO)
 508 +
 509 +#define DSMG600_RB_GPIO                3       /* reset button */
 510 +
 511 +#define DSMG600_RB_IRQ         IRQ_IXP4XX_GPIO3
 512 +
 513 +#define DSMG600_PO_GPIO                2       /* power off */
 514 +
 515 +/* LEDs */
 516 +
 517 +#define DSMG600_LED_PWR_GPIO   0
 518 +#define DSMG600_LED_PWR_BM     (1L << DSMG600_LED_PWR_GPIO)
 519 +
 520 +#define DSMG600_LED_WLAN_GPIO  14
 521 +#define DSMG600_LED_WLAN_BM    (1L << DSMG600_LED_WLAN_GPIO)
 522 Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/hardware.h
 523 ===================================================================
 524 --- linux-2.6.21.1-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h
 525 +++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/hardware.h
 526 @@ -47,5 +47,6 @@
 527  #include "prpmc1100.h"
 528  #include "nslu2.h"
 529  #include "nas100d.h"
 530 +#include "dsmg600.h"
 531
 532  #endif  /* _ASM_ARCH_HARDWARE_H */
 533 Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/irqs.h
 534 ===================================================================
 535 --- linux-2.6.21.1-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h
 536 +++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/irqs.h
 537 @@ -118,4 +118,14 @@
 538  #define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
 539  #define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
 540
 541 +/*
 542 + * D-Link DSM-G600 RevA board IRQs
 543 + */
 544 +#define        IRQ_DSMG600_PCI_INTA    IRQ_IXP4XX_GPIO11
 545 +#define        IRQ_DSMG600_PCI_INTB    IRQ_IXP4XX_GPIO10
 546 +#define        IRQ_DSMG600_PCI_INTC    IRQ_IXP4XX_GPIO9
 547 +#define        IRQ_DSMG600_PCI_INTD    IRQ_IXP4XX_GPIO8
 548 +#define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
 549 +#define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
 550 +
 551  #endif