projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
ar71xx: fix an unused variable warning
[openwrt.git] / target / linux / generic / patches-2.6.30 / 941-ssb_update.patch
1 --- a/drivers/ssb/Kconfig
2 +++ b/drivers/ssb/Kconfig
3 @@ -66,6 +66,20 @@ config SSB_PCMCIAHOST
4
5 If unsure, say N
6
7 +config SSB_SDIOHOST_POSSIBLE
8 + bool
9 + depends on SSB && (MMC = y || MMC = SSB)
10 + default y
11 +
12 +config SSB_SDIOHOST
13 + bool "Support for SSB on SDIO-bus host"
14 + depends on SSB_SDIOHOST_POSSIBLE
15 + help
16 + Support for a Sonics Silicon Backplane on top
17 + of a SDIO device.
18 +
19 + If unsure, say N
20 +
21 config SSB_SILENT
22 bool "No SSB kernel messages"
23 depends on SSB && EMBEDDED
24 --- a/drivers/ssb/Makefile
25 +++ b/drivers/ssb/Makefile
26 @@ -6,6 +6,7 @@ ssb-$(CONFIG_SSB_SPROM) += sprom.o
27 # host support
28 ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
29 ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o
30 +ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
31
32 # built-in drivers
33 ssb-y += driver_chipcommon.o
34 --- a/drivers/ssb/b43_pci_bridge.c
35 +++ b/drivers/ssb/b43_pci_bridge.c
36 @@ -24,6 +24,7 @@ static const struct pci_device_id b43_pc
37 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
38 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
39 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
40 + { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) },
41 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
42 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
43 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
44 --- a/drivers/ssb/driver_chipcommon.c
45 +++ b/drivers/ssb/driver_chipcommon.c
46 @@ -209,6 +209,24 @@ static void chipco_powercontrol_init(str
47 }
48 }
49
50 +/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
51 +static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
52 +{
53 + struct ssb_bus *bus = cc->dev->bus;
54 +
55 + switch (bus->chip_id) {
56 + case 0x4312:
57 + case 0x4322:
58 + case 0x4328:
59 + return 7000;
60 + case 0x4325:
61 + /* TODO: */
62 + default:
63 + return 15000;
64 + }
65 +}
66 +
67 +/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
68 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
69 {
70 struct ssb_bus *bus = cc->dev->bus;
71 @@ -218,6 +236,12 @@ static void calc_fast_powerup_delay(stru
72
73 if (bus->bustype != SSB_BUSTYPE_PCI)
74 return;
75 +
76 + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
77 + cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
78 + return;
79 + }
80 +
81 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
82 return;
83
84 @@ -233,6 +257,9 @@ void ssb_chipcommon_init(struct ssb_chip
85 {
86 if (!cc->dev)
87 return; /* We don't have a ChipCommon */
88 + if (cc->dev->id.revision >= 11)
89 + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
90 + ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
91 ssb_pmu_init(cc);
92 chipco_powercontrol_init(cc);
93 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
94 @@ -370,6 +397,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
95 {
96 return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
97 }
98 +EXPORT_SYMBOL(ssb_chipco_gpio_control);
99
100 u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
101 {
102 --- a/drivers/ssb/driver_chipcommon_pmu.c
103 +++ b/drivers/ssb/driver_chipcommon_pmu.c
104 @@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
105 chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
106 }
107
108 +static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
109 + u32 offset, u32 mask, u32 set)
110 +{
111 + u32 value;
112 +
113 + chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
114 + chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
115 + chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
116 + value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
117 + value &= mask;
118 + value |= set;
119 + chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
120 + chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
121 +}
122 +
123 struct pmu0_plltab_entry {
124 u16 freq; /* Crystal frequency in kHz.*/
125 u8 xf; /* Crystal frequency value for PMU control */
126 @@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
127 case 0x5354:
128 ssb_pmu0_pllinit_r0(cc, crystalfreq);
129 break;
130 + case 0x4322:
131 + if (cc->pmu.rev == 2) {
132 + chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A);
133 + chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
134 + }
135 + break;
136 default:
137 ssb_printk(KERN_ERR PFX
138 "ERROR: PLL init unknown for device %04X\n",
139 @@ -402,6 +423,7 @@ static void ssb_pmu_resources_init(struc
140
141 switch (bus->chip_id) {
142 case 0x4312:
143 + case 0x4322:
144 /* We keep the default settings:
145 * min_msk = 0xCBB
146 * max_msk = 0x7FFFF
147 @@ -480,9 +502,9 @@ static void ssb_pmu_resources_init(struc
148 chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
149 }
150
151 +/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
152 void ssb_pmu_init(struct ssb_chipcommon *cc)
153 {
154 - struct ssb_bus *bus = cc->dev->bus;
155 u32 pmucap;
156
157 if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
158 @@ -494,15 +516,91 @@ void ssb_pmu_init(struct ssb_chipcommon
159 ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
160 cc->pmu.rev, pmucap);
161
162 - if (cc->pmu.rev >= 1) {
163 - if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
164 - chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
165 - ~SSB_CHIPCO_PMU_CTL_NOILPONW);
166 - } else {
167 - chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
168 - SSB_CHIPCO_PMU_CTL_NOILPONW);
169 - }
170 - }
171 + if (cc->pmu.rev == 1)
172 + chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
173 + ~SSB_CHIPCO_PMU_CTL_NOILPONW);
174 + else
175 + chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
176 + SSB_CHIPCO_PMU_CTL_NOILPONW);
177 ssb_pmu_pll_init(cc);
178 ssb_pmu_resources_init(cc);
179 }
180 +
181 +void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
182 + enum ssb_pmu_ldo_volt_id id, u32 voltage)
183 +{
184 + struct ssb_bus *bus = cc->dev->bus;
185 + u32 addr, shift, mask;
186 +
187 + switch (bus->chip_id) {
188 + case 0x4328:
189 + case 0x5354:
190 + switch (id) {
191 + case LDO_VOLT1:
192 + addr = 2;
193 + shift = 25;
194 + mask = 0xF;
195 + break;
196 + case LDO_VOLT2:
197 + addr = 3;
198 + shift = 1;
199 + mask = 0xF;
200 + break;
201 + case LDO_VOLT3:
202 + addr = 3;
203 + shift = 9;
204 + mask = 0xF;
205 + break;
206 + case LDO_PAREF:
207 + addr = 3;
208 + shift = 17;
209 + mask = 0x3F;
210 + break;
211 + default:
212 + SSB_WARN_ON(1);
213 + return;
214 + }
215 + break;
216 + case 0x4312:
217 + if (SSB_WARN_ON(id != LDO_PAREF))
218 + return;
219 + addr = 0;
220 + shift = 21;
221 + mask = 0x3F;
222 + break;
223 + default:
224 + return;
225 + }
226 +
227 + ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
228 + (voltage & mask) << shift);
229 +}
230 +
231 +void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
232 +{
233 + struct ssb_bus *bus = cc->dev->bus;
234 + int ldo;
235 +
236 + switch (bus->chip_id) {
237 + case 0x4312:
238 + ldo = SSB_PMURES_4312_PA_REF_LDO;
239 + break;
240 + case 0x4328:
241 + ldo = SSB_PMURES_4328_PA_REF_LDO;
242 + break;
243 + case 0x5354:
244 + ldo = SSB_PMURES_5354_PA_REF_LDO;
245 + break;
246 + default:
247 + return;
248 + }
249 +
250 + if (on)
251 + chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
252 + else
253 + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
254 + chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
255 +}
256 +
257 +EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
258 +EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
259 --- a/drivers/ssb/driver_gige.c
260 +++ b/drivers/ssb/driver_gige.c
261 @@ -12,6 +12,7 @@
262 #include <linux/ssb/ssb_driver_gige.h>
263 #include <linux/pci.h>
264 #include <linux/pci_regs.h>
265 +#include <linux/slab.h>
266
267
268 /*
269 --- a/drivers/ssb/driver_mipscore.c
270 +++ b/drivers/ssb/driver_mipscore.c
271 @@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = {
272
273 static inline u32 ssb_irqflag(struct ssb_device *dev)
274 {
275 - return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
276 + u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
277 + if (tpsflag)
278 + return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
279 + else
280 + /* not irq supported */
281 + return 0x3f;
282 +}
283 +
284 +static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
285 +{
286 + struct ssb_bus *bus = rdev->bus;
287 + int i;
288 + for (i = 0; i < bus->nr_devices; i++) {
289 + struct ssb_device *dev;
290 + dev = &(bus->devices[i]);
291 + if (ssb_irqflag(dev) == irqflag)
292 + return dev;
293 + }
294 + return NULL;
295 }
296
297 /* Get the MIPS IRQ assignment for a specified device.
298 * If unassigned, 0 is returned.
299 + * If disabled, 5 is returned.
300 + * If not supported, 6 is returned.
301 */
302 unsigned int ssb_mips_irq(struct ssb_device *dev)
303 {
304 struct ssb_bus *bus = dev->bus;
305 + struct ssb_device *mdev = bus->mipscore.dev;
306 u32 irqflag;
307 u32 ipsflag;
308 u32 tmp;
309 unsigned int irq;
310
311 irqflag = ssb_irqflag(dev);
312 + if (irqflag == 0x3f)
313 + return 6;
314 ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
315 for (irq = 1; irq <= 4; irq++) {
316 tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
317 if (tmp == irqflag)
318 break;
319 }
320 - if (irq == 5)
321 - irq = 0;
322 + if (irq == 5) {
323 + if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
324 + irq = 0;
325 + }
326
327 return irq;
328 }
329 @@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *d
330 struct ssb_device *mdev = bus->mipscore.dev;
331 u32 irqflag = ssb_irqflag(dev);
332
333 + BUG_ON(oldirq == 6);
334 +
335 dev->irq = irq + 2;
336
337 - ssb_dprintk(KERN_INFO PFX
338 - "set_irq: core 0x%04x, irq %d => %d\n",
339 - dev->id.coreid, oldirq, irq);
340 /* clear the old irq */
341 if (oldirq == 0)
342 ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
343 - else
344 + else if (oldirq != 5)
345 clear_irq(bus, oldirq);
346
347 /* assign the new one */
348 if (irq == 0) {
349 ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
350 } else {
351 + u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
352 + if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
353 + u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
354 + struct ssb_device *olddev = find_device(dev, oldipsflag);
355 + if (olddev)
356 + set_irq(olddev, 0);
357 + }
358 irqflag <<= ipsflag_irq_shift[irq];
359 - irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
360 + irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
361 ssb_write32(mdev, SSB_IPSFLAG, irqflag);
362 }
363 + ssb_dprintk(KERN_INFO PFX
364 + "set_irq: core 0x%04x, irq %d => %d\n",
365 + dev->id.coreid, oldirq+2, irq+2);
366 +}
367 +
368 +static void print_irq(struct ssb_device *dev, unsigned int irq)
369 +{
370 + int i;
371 + static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
372 + ssb_dprintk(KERN_INFO PFX
373 + "core 0x%04x, irq :", dev->id.coreid);
374 + for (i = 0; i <= 6; i++) {
375 + ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
376 + }
377 + ssb_dprintk("\n");
378 +}
379 +
380 +static void dump_irq(struct ssb_bus *bus)
381 +{
382 + int i;
383 + for (i = 0; i < bus->nr_devices; i++) {
384 + struct ssb_device *dev;
385 + dev = &(bus->devices[i]);
386 + print_irq(dev, ssb_mips_irq(dev));
387 + }
388 }
389
390 static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
391 @@ -197,17 +253,23 @@ void ssb_mipscore_init(struct ssb_mipsco
392
393 /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
394 for (irq = 2, i = 0; i < bus->nr_devices; i++) {
395 + int mips_irq;
396 dev = &(bus->devices[i]);
397 - dev->irq = ssb_mips_irq(dev) + 2;
398 + mips_irq = ssb_mips_irq(dev);
399 + if (mips_irq > 4)
400 + dev->irq = 0;
401 + else
402 + dev->irq = mips_irq + 2;
403 + if (dev->irq > 5)
404 + continue;
405 switch (dev->id.coreid) {
406 case SSB_DEV_USB11_HOST:
407 /* shouldn't need a separate irq line for non-4710, most of them have a proper
408 * external usb controller on the pci */
409 if ((bus->chip_id == 0x4710) && (irq <= 4)) {
410 set_irq(dev, irq++);
411 - break;
412 }
413 - /* fallthrough */
414 + break;
415 case SSB_DEV_PCI:
416 case SSB_DEV_ETHERNET:
417 case SSB_DEV_ETHERNET_GBIT:
418 @@ -218,8 +280,14 @@ void ssb_mipscore_init(struct ssb_mipsco
419 set_irq(dev, irq++);
420 break;
421 }
422 + /* fallthrough */
423 + case SSB_DEV_EXTIF:
424 + set_irq(dev, 0);
425 + break;
426 }
427 }
428 + ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
429 + dump_irq(bus);
430
431 ssb_mips_serial_init(mcore);
432 ssb_mips_flash_detect(mcore);
433 --- a/drivers/ssb/driver_pcicore.c
434 +++ b/drivers/ssb/driver_pcicore.c
435 @@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore
436 .pci_ops = &ssb_pcicore_pciops,
437 .io_resource = &ssb_pcicore_io_resource,
438 .mem_resource = &ssb_pcicore_mem_resource,
439 - .mem_offset = 0x24000000,
440 };
441
442 -static u32 ssb_pcicore_pcibus_iobase = 0x100;
443 -static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
444 -
445 /* This function is called when doing a pci_enable_device().
446 * We must first check if the device is a device on the PCI-core bridge. */
447 int ssb_pcicore_plat_dev_init(struct pci_dev *d)
448 {
449 - struct resource *res;
450 - int pos, size;
451 - u32 *base;
452 -
453 if (d->bus->ops != &ssb_pcicore_pciops) {
454 /* This is not a device on the PCI-core bridge. */
455 return -ENODEV;
456 @@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci
457 ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
458 pci_name(d));
459
460 - /* Fix up resource bases */
461 - for (pos = 0; pos < 6; pos++) {
462 - res = &d->resource[pos];
463 - if (res->flags & IORESOURCE_IO)
464 - base = &ssb_pcicore_pcibus_iobase;
465 - else
466 - base = &ssb_pcicore_pcibus_membase;
467 - res->flags |= IORESOURCE_PCI_FIXED;
468 - if (res->end) {
469 - size = res->end - res->start + 1;
470 - if (*base & (size - 1))
471 - *base = (*base + size) & ~(size - 1);
472 - res->start = *base;
473 - res->end = res->start + size - 1;
474 - *base += size;
475 - pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
476 - }
477 - /* Fix up PCI bridge BAR0 only */
478 - if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
479 - break;
480 - }
481 /* Fix up interrupt lines */
482 d->irq = ssb_mips_irq(extpci_core->dev) + 2;
483 pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
484 @@ -551,13 +522,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc
485 might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
486
487 /* Enable interrupts for this device. */
488 - if (bus->host_pci &&
489 - ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
490 + if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
491 u32 coremask;
492
493 /* Calculate the "coremask" for the device. */
494 coremask = (1 << dev->core_index);
495
496 + SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
497 err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
498 if (err)
499 goto out;
500 --- a/drivers/ssb/main.c
501 +++ b/drivers/ssb/main.c
502 @@ -17,6 +17,8 @@
503 #include <linux/ssb/ssb_driver_gige.h>
504 #include <linux/dma-mapping.h>
505 #include <linux/pci.h>
506 +#include <linux/mmc/sdio_func.h>
507 +#include <linux/slab.h>
508
509 #include <pcmcia/cs_types.h>
510 #include <pcmcia/cs.h>
511 @@ -88,6 +90,25 @@ found:
512 }
513 #endif /* CONFIG_SSB_PCMCIAHOST */
514
515 +#ifdef CONFIG_SSB_SDIOHOST
516 +struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
517 +{
518 + struct ssb_bus *bus;
519 +
520 + ssb_buses_lock();
521 + list_for_each_entry(bus, &buses, list) {
522 + if (bus->bustype == SSB_BUSTYPE_SDIO &&
523 + bus->host_sdio == func)
524 + goto found;
525 + }
526 + bus = NULL;
527 +found:
528 + ssb_buses_unlock();
529 +
530 + return bus;
531 +}
532 +#endif /* CONFIG_SSB_SDIOHOST */
533 +
534 int ssb_for_each_bus_call(unsigned long data,
535 int (*func)(struct ssb_bus *bus, unsigned long data))
536 {
537 @@ -120,6 +141,19 @@ static void ssb_device_put(struct ssb_de
538 put_device(dev->dev);
539 }
540
541 +static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
542 +{
543 + if (drv)
544 + get_driver(&drv->drv);
545 + return drv;
546 +}
547 +
548 +static inline void ssb_driver_put(struct ssb_driver *drv)
549 +{
550 + if (drv)
551 + put_driver(&drv->drv);
552 +}
553 +
554 static int ssb_device_resume(struct device *dev)
555 {
556 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
557 @@ -190,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
558 EXPORT_SYMBOL(ssb_bus_suspend);
559
560 #ifdef CONFIG_SSB_SPROM
561 -int ssb_devices_freeze(struct ssb_bus *bus)
562 +/** ssb_devices_freeze - Freeze all devices on the bus.
563 + *
564 + * After freezing no device driver will be handling a device
565 + * on this bus anymore. ssb_devices_thaw() must be called after
566 + * a successful freeze to reactivate the devices.
567 + *
568 + * @bus: The bus.
569 + * @ctx: Context structure. Pass this to ssb_devices_thaw().
570 + */
571 +int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
572 {
573 - struct ssb_device *dev;
574 - struct ssb_driver *drv;
575 - int err = 0;
576 - int i;
577 - pm_message_t state = PMSG_FREEZE;
578 + struct ssb_device *sdev;
579 + struct ssb_driver *sdrv;
580 + unsigned int i;
581 +
582 + memset(ctx, 0, sizeof(*ctx));
583 + ctx->bus = bus;
584 + SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
585
586 - /* First check that we are capable to freeze all devices. */
587 for (i = 0; i < bus->nr_devices; i++) {
588 - dev = &(bus->devices[i]);
589 - if (!dev->dev ||
590 - !dev->dev->driver ||
591 - !device_is_registered(dev->dev))
592 - continue;
593 - drv = drv_to_ssb_drv(dev->dev->driver);
594 - if (!drv)
595 + sdev = ssb_device_get(&bus->devices[i]);
596 +
597 + if (!sdev->dev || !sdev->dev->driver ||
598 + !device_is_registered(sdev->dev)) {
599 + ssb_device_put(sdev);
600 continue;
601 - if (!drv->suspend) {
602 - /* Nope, can't suspend this one. */
603 - return -EOPNOTSUPP;
604 }
605 - }
606 - /* Now suspend all devices */
607 - for (i = 0; i < bus->nr_devices; i++) {
608 - dev = &(bus->devices[i]);
609 - if (!dev->dev ||
610 - !dev->dev->driver ||
611 - !device_is_registered(dev->dev))
612 + sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
613 + if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
614 + ssb_device_put(sdev);
615 continue;
616 - drv = drv_to_ssb_drv(dev->dev->driver);
617 - if (!drv)
618 - continue;
619 - err = drv->suspend(dev, state);
620 - if (err) {
621 - ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
622 - dev_name(dev->dev));
623 - goto err_unwind;
624 }
625 + sdrv->remove(sdev);
626 + ctx->device_frozen[i] = 1;
627 }
628
629 return 0;
630 -err_unwind:
631 - for (i--; i >= 0; i--) {
632 - dev = &(bus->devices[i]);
633 - if (!dev->dev ||
634 - !dev->dev->driver ||
635 - !device_is_registered(dev->dev))
636 - continue;
637 - drv = drv_to_ssb_drv(dev->dev->driver);
638 - if (!drv)
639 - continue;
640 - if (drv->resume)
641 - drv->resume(dev);
642 - }
643 - return err;
644 }
645
646 -int ssb_devices_thaw(struct ssb_bus *bus)
647 +/** ssb_devices_thaw - Unfreeze all devices on the bus.
648 + *
649 + * This will re-attach the device drivers and re-init the devices.
650 + *
651 + * @ctx: The context structure from ssb_devices_freeze()
652 + */
653 +int ssb_devices_thaw(struct ssb_freeze_context *ctx)
654 {
655 - struct ssb_device *dev;
656 - struct ssb_driver *drv;
657 - int err;
658 - int i;
659 + struct ssb_bus *bus = ctx->bus;
660 + struct ssb_device *sdev;
661 + struct ssb_driver *sdrv;
662 + unsigned int i;
663 + int err, result = 0;
664
665 for (i = 0; i < bus->nr_devices; i++) {
666 - dev = &(bus->devices[i]);
667 - if (!dev->dev ||
668 - !dev->dev->driver ||
669 - !device_is_registered(dev->dev))
670 + if (!ctx->device_frozen[i])
671 continue;
672 - drv = drv_to_ssb_drv(dev->dev->driver);
673 - if (!drv)
674 + sdev = &bus->devices[i];
675 +
676 + if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
677 continue;
678 - if (SSB_WARN_ON(!drv->resume))
679 + sdrv = drv_to_ssb_drv(sdev->dev->driver);
680 + if (SSB_WARN_ON(!sdrv || !sdrv->probe))
681 continue;
682 - err = drv->resume(dev);
683 +
684 + err = sdrv->probe(sdev, &sdev->id);
685 if (err) {
686 ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
687 - dev_name(dev->dev));
688 + dev_name(sdev->dev));
689 + result = err;
690 }
691 + ssb_driver_put(sdrv);
692 + ssb_device_put(sdev);
693 }
694
695 - return 0;
696 + return result;
697 }
698 #endif /* CONFIG_SSB_SPROM */
699
700 @@ -360,6 +385,35 @@ static int ssb_device_uevent(struct devi
701 ssb_dev->id.revision);
702 }
703
704 +#define ssb_config_attr(attrib, field, format_string) \
705 +static ssize_t \
706 +attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
707 +{ \
708 + return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
709 +}
710 +
711 +ssb_config_attr(core_num, core_index, "%u\n")
712 +ssb_config_attr(coreid, id.coreid, "0x%04x\n")
713 +ssb_config_attr(vendor, id.vendor, "0x%04x\n")
714 +ssb_config_attr(revision, id.revision, "%u\n")
715 +ssb_config_attr(irq, irq, "%u\n")
716 +static ssize_t
717 +name_show(struct device *dev, struct device_attribute *attr, char *buf)
718 +{
719 + return sprintf(buf, "%s\n",
720 + ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
721 +}
722 +
723 +static struct device_attribute ssb_device_attrs[] = {
724 + __ATTR_RO(name),
725 + __ATTR_RO(core_num),
726 + __ATTR_RO(coreid),
727 + __ATTR_RO(vendor),
728 + __ATTR_RO(revision),
729 + __ATTR_RO(irq),
730 + __ATTR_NULL,
731 +};
732 +
733 static struct bus_type ssb_bustype = {
734 .name = "ssb",
735 .match = ssb_bus_match,
736 @@ -369,6 +423,7 @@ static struct bus_type ssb_bustype = {
737 .suspend = ssb_device_suspend,
738 .resume = ssb_device_resume,
739 .uevent = ssb_device_uevent,
740 + .dev_attrs = ssb_device_attrs,
741 };
742
743 static void ssb_buses_lock(void)
744 @@ -461,6 +516,7 @@ static int ssb_devices_register(struct s
745 #ifdef CONFIG_SSB_PCIHOST
746 sdev->irq = bus->host_pci->irq;
747 dev->parent = &bus->host_pci->dev;
748 + sdev->dma_dev = dev->parent;
749 #endif
750 break;
751 case SSB_BUSTYPE_PCMCIA:
752 @@ -469,8 +525,14 @@ static int ssb_devices_register(struct s
753 dev->parent = &bus->host_pcmcia->dev;
754 #endif
755 break;
756 + case SSB_BUSTYPE_SDIO:
757 +#ifdef CONFIG_SSB_SDIOHOST
758 + dev->parent = &bus->host_sdio->dev;
759 +#endif
760 + break;
761 case SSB_BUSTYPE_SSB:
762 dev->dma_mask = &dev->coherent_dma_mask;
763 + sdev->dma_dev = dev;
764 break;
765 }
766
767 @@ -724,12 +786,18 @@ static int ssb_bus_register(struct ssb_b
768 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
769 if (err)
770 goto out;
771 +
772 + /* Init SDIO-host device (if any), before the scan */
773 + err = ssb_sdio_init(bus);
774 + if (err)
775 + goto err_disable_xtal;
776 +
777 ssb_buses_lock();
778 bus->busnumber = next_busnumber;
779 /* Scan for devices (cores) */
780 err = ssb_bus_scan(bus, baseaddr);
781 if (err)
782 - goto err_disable_xtal;
783 + goto err_sdio_exit;
784
785 /* Init PCI-host device (if any) */
786 err = ssb_pci_init(bus);
787 @@ -776,6 +844,8 @@ err_pci_exit:
788 ssb_pci_exit(bus);
789 err_unmap:
790 ssb_iounmap(bus);
791 +err_sdio_exit:
792 + ssb_sdio_exit(bus);
793 err_disable_xtal:
794 ssb_buses_unlock();
795 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
796 @@ -796,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b
797 if (!err) {
798 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
799 "PCI device %s\n", dev_name(&host_pci->dev));
800 + } else {
801 + ssb_printk(KERN_ERR PFX "Failed to register PCI version"
802 + " of SSB with error %d\n", err);
803 }
804
805 return err;
806 @@ -825,6 +898,28 @@ int ssb_bus_pcmciabus_register(struct ss
807 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
808 #endif /* CONFIG_SSB_PCMCIAHOST */
809
810 +#ifdef CONFIG_SSB_SDIOHOST
811 +int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
812 + unsigned int quirks)
813 +{
814 + int err;
815 +
816 + bus->bustype = SSB_BUSTYPE_SDIO;
817 + bus->host_sdio = func;
818 + bus->ops = &ssb_sdio_ops;
819 + bus->quirks = quirks;
820 +
821 + err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
822 + if (!err) {
823 + ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
824 + "SDIO device %s\n", sdio_func_id(func));
825 + }
826 +
827 + return err;
828 +}
829 +EXPORT_SYMBOL(ssb_bus_sdiobus_register);
830 +#endif /* CONFIG_SSB_PCMCIAHOST */
831 +
832 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
833 unsigned long baseaddr,
834 ssb_invariants_func_t get_invariants)
835 @@ -1099,10 +1194,10 @@ void ssb_device_enable(struct ssb_device
836 }
837 EXPORT_SYMBOL(ssb_device_enable);
838
839 -/* Wait for a bit in a register to get set or unset.
840 +/* Wait for bitmask in a register to get set or cleared.
841 * timeout is in units of ten-microseconds */
842 -static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
843 - int timeout, int set)
844 +static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
845 + int timeout, int set)
846 {
847 int i;
848 u32 val;
849 @@ -1110,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic
850 for (i = 0; i < timeout; i++) {
851 val = ssb_read32(dev, reg);
852 if (set) {
853 - if (val & bitmask)
854 + if ((val & bitmask) == bitmask)
855 return 0;
856 } else {
857 if (!(val & bitmask))
858 @@ -1127,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic
859
860 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
861 {
862 - u32 reject;
863 + u32 reject, val;
864
865 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
866 return;
867
868 reject = ssb_tmslow_reject_bitmask(dev);
869 - ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
870 - ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
871 - ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
872 - ssb_write32(dev, SSB_TMSLOW,
873 - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
874 - reject | SSB_TMSLOW_RESET |
875 - core_specific_flags);
876 - ssb_flush_tmslow(dev);
877 +
878 + if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
879 + ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
880 + ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
881 + ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
882 +
883 + if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
884 + val = ssb_read32(dev, SSB_IMSTATE);
885 + val |= SSB_IMSTATE_REJECT;
886 + ssb_write32(dev, SSB_IMSTATE, val);
887 + ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
888 + 0);
889 + }
890 +
891 + ssb_write32(dev, SSB_TMSLOW,
892 + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
893 + reject | SSB_TMSLOW_RESET |
894 + core_specific_flags);
895 + ssb_flush_tmslow(dev);
896 +
897 + if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
898 + val = ssb_read32(dev, SSB_IMSTATE);
899 + val &= ~SSB_IMSTATE_REJECT;
900 + ssb_write32(dev, SSB_IMSTATE, val);
901 + }
902 + }
903
904 ssb_write32(dev, SSB_TMSLOW,
905 reject | SSB_TMSLOW_RESET |
906 @@ -1358,8 +1471,10 @@ static int __init ssb_modinit(void)
907 ssb_buses_lock();
908 err = ssb_attach_queued_buses();
909 ssb_buses_unlock();
910 - if (err)
911 + if (err) {
912 bus_unregister(&ssb_bustype);
913 + goto out;
914 + }
915
916 err = b43_pci_ssb_bridge_init();
917 if (err) {
918 @@ -1375,7 +1490,7 @@ static int __init ssb_modinit(void)
919 /* don't fail SSB init because of this */
920 err = 0;
921 }
922 -
923 +out:
924 return err;
925 }
926 /* ssb must be initialized after PCI but before the ssb drivers.
927 --- a/drivers/ssb/pci.c
928 +++ b/drivers/ssb/pci.c
929 @@ -17,6 +17,7 @@
930
931 #include <linux/ssb/ssb.h>
932 #include <linux/ssb/ssb_regs.h>
933 +#include <linux/slab.h>
934 #include <linux/pci.h>
935 #include <linux/delay.h>
936
937 @@ -167,10 +168,16 @@ err_pci:
938 }
939
940 /* Get the word-offset for a SSB_SPROM_XXX define. */
941 -#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
942 +#define SPOFF(offset) ((offset) / sizeof(u16))
943 /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
944 -#define SPEX(_outvar, _offset, _mask, _shift) \
945 +#define SPEX16(_outvar, _offset, _mask, _shift) \
946 out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
947 +#define SPEX32(_outvar, _offset, _mask, _shift) \
948 + out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
949 + in[SPOFF(_offset)]) & (_mask)) >> (_shift))
950 +#define SPEX(_outvar, _offset, _mask, _shift) \
951 + SPEX16(_outvar, _offset, _mask, _shift)
952 +
953
954 static inline u8 ssb_crc8(u8 crc, u8 data)
955 {
956 @@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
957 int i;
958
959 for (i = 0; i < bus->sprom_size; i++)
960 - sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
961 + sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
962
963 return 0;
964 }
965 @@ -278,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
966 ssb_printk("75%%");
967 else if (i % 2)
968 ssb_printk(".");
969 - writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
970 + writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
971 mmiowb();
972 msleep(20);
973 }
974 @@ -399,6 +406,46 @@ static void sprom_extract_r123(struct ss
975 out->antenna_gain.ghz5.a3 = gain;
976 }
977
978 +/* Revs 4 5 and 8 have partially shared layout */
979 +static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
980 +{
981 + SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
982 + SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
983 + SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
984 + SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
985 + SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
986 + SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
987 + SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
988 + SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
989 +
990 + SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
991 + SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
992 + SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
993 + SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
994 + SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
995 + SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
996 + SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
997 + SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
998 +
999 + SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
1000 + SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
1001 + SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
1002 + SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
1003 + SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
1004 + SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
1005 + SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
1006 + SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
1007 +
1008 + SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
1009 + SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
1010 + SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
1011 + SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
1012 + SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
1013 + SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
1014 + SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
1015 + SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
1016 +}
1017 +
1018 static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
1019 {
1020 int i;
1021 @@ -421,10 +468,14 @@ static void sprom_extract_r45(struct ssb
1022 SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
1023 SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
1024 SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
1025 + SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
1026 + SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
1027 } else {
1028 SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
1029 SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
1030 SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
1031 + SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
1032 + SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
1033 }
1034 SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
1035 SSB_SPROM4_ANTAVAIL_A_SHIFT);
1036 @@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb
1037 memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
1038 sizeof(out->antenna_gain.ghz5));
1039
1040 + sprom_extract_r458(out, in);
1041 +
1042 /* TODO - get remaining rev 4 stuff needed */
1043 }
1044
1045 @@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_
1046
1047 /* extract the MAC address */
1048 for (i = 0; i < 3; i++) {
1049 - v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
1050 + v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
1051 *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
1052 }
1053 SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
1054 SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
1055 SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
1056 + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
1057 + SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
1058 SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
1059 SSB_SPROM8_ANTAVAIL_A_SHIFT);
1060 SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
1061 @@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_
1062 SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
1063 SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
1064 SSB_SPROM8_ITSSI_A_SHIFT);
1065 + SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
1066 + SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
1067 + SSB_SPROM8_MAXP_AL_SHIFT);
1068 SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
1069 SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
1070 SSB_SPROM8_GPIOA_P1_SHIFT);
1071 SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
1072 SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
1073 SSB_SPROM8_GPIOB_P3_SHIFT);
1074 + SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
1075 + SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
1076 + SSB_SPROM8_TRI5G_SHIFT);
1077 + SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
1078 + SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
1079 + SSB_SPROM8_TRI5GH_SHIFT);
1080 + SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
1081 + SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
1082 + SSB_SPROM8_RXPO5G_SHIFT);
1083 + SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
1084 + SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
1085 + SSB_SPROM8_RSSISMC2G_SHIFT);
1086 + SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
1087 + SSB_SPROM8_RSSISAV2G_SHIFT);
1088 + SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
1089 + SSB_SPROM8_BXA2G_SHIFT);
1090 + SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
1091 + SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
1092 + SSB_SPROM8_RSSISMC5G_SHIFT);
1093 + SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
1094 + SSB_SPROM8_RSSISAV5G_SHIFT);
1095 + SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
1096 + SSB_SPROM8_BXA5G_SHIFT);
1097 + SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
1098 + SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
1099 + SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
1100 + SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
1101 + SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
1102 + SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
1103 + SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
1104 + SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
1105 + SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
1106 + SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
1107 + SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
1108 + SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
1109 + SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
1110 + SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
1111 + SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
1112 + SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
1113 + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
1114
1115 /* Extract the antenna gain values. */
1116 SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
1117 @@ -509,6 +607,8 @@ static void sprom_extract_r8(struct ssb_
1118 memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
1119 sizeof(out->antenna_gain.ghz5));
1120
1121 + sprom_extract_r458(out, in);
1122 +
1123 /* TODO - get remaining rev 8 stuff needed */
1124 }
1125
1126 @@ -521,36 +621,34 @@ static int sprom_extract(struct ssb_bus
1127 ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
1128 memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
1129 memset(out->et1mac, 0xFF, 6);
1130 +
1131 if ((bus->chip_id & 0xFF00) == 0x4400) {
1132 /* Workaround: The BCM44XX chip has a stupid revision
1133 * number stored in the SPROM.
1134 * Always extract r1. */
1135 out->revision = 1;
1136 + ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
1137 + }
1138 +
1139 + switch (out->revision) {
1140 + case 1:
1141 + case 2:
1142 + case 3:
1143 sprom_extract_r123(out, in);
1144 - } else if (bus->chip_id == 0x4321) {
1145 - /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
1146 - out->revision = 4;
1147 + break;
1148 + case 4:
1149 + case 5:
1150 sprom_extract_r45(out, in);
1151 - } else {
1152 - switch (out->revision) {
1153 - case 1:
1154 - case 2:
1155 - case 3:
1156 - sprom_extract_r123(out, in);
1157 - break;
1158 - case 4:
1159 - case 5:
1160 - sprom_extract_r45(out, in);
1161 - break;
1162 - case 8:
1163 - sprom_extract_r8(out, in);
1164 - break;
1165 - default:
1166 - ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
1167 - " revision %d detected. Will extract"
1168 - " v1\n", out->revision);
1169 - sprom_extract_r123(out, in);
1170 - }
1171 + break;
1172 + case 8:
1173 + sprom_extract_r8(out, in);
1174 + break;
1175 + default:
1176 + ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
1177 + " revision %d detected. Will extract"
1178 + " v1\n", out->revision);
1179 + out->revision = 1;
1180 + sprom_extract_r123(out, in);
1181 }
1182
1183 if (out->boardflags_lo == 0xFFFF)
1184 @@ -565,12 +663,34 @@ static int ssb_pci_sprom_get(struct ssb_
1185 struct ssb_sprom *sprom)
1186 {
1187 const struct ssb_sprom *fallback;
1188 - int err = -ENOMEM;
1189 + int err;
1190 u16 *buf;
1191
1192 + if (!ssb_is_sprom_available(bus)) {
1193 + ssb_printk(KERN_ERR PFX "No SPROM available!\n");
1194 + return -ENODEV;
1195 + }
1196 + if (bus->chipco.dev) { /* can be unavailible! */
1197 + /*
1198 + * get SPROM offset: SSB_SPROM_BASE1 except for
1199 + * chipcommon rev >= 31 or chip ID is 0x4312 and
1200 + * chipcommon status & 3 == 2
1201 + */
1202 + if (bus->chipco.dev->id.revision >= 31)
1203 + bus->sprom_offset = SSB_SPROM_BASE31;
1204 + else if (bus->chip_id == 0x4312 &&
1205 + (bus->chipco.status & 0x03) == 2)
1206 + bus->sprom_offset = SSB_SPROM_BASE31;
1207 + else
1208 + bus->sprom_offset = SSB_SPROM_BASE1;
1209 + } else {
1210 + bus->sprom_offset = SSB_SPROM_BASE1;
1211 + }
1212 + ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
1213 +
1214 buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
1215 if (!buf)
1216 - goto out;
1217 + return -ENOMEM;
1218 bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
1219 sprom_do_read(bus, buf);
1220 err = sprom_check_crc(buf, bus->sprom_size);
1221 @@ -580,7 +700,7 @@ static int ssb_pci_sprom_get(struct ssb_
1222 buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
1223 GFP_KERNEL);
1224 if (!buf)
1225 - goto out;
1226 + return -ENOMEM;
1227 bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
1228 sprom_do_read(bus, buf);
1229 err = sprom_check_crc(buf, bus->sprom_size);
1230 @@ -602,7 +722,6 @@ static int ssb_pci_sprom_get(struct ssb_
1231
1232 out_free:
1233 kfree(buf);
1234 -out:
1235 return err;
1236 }
1237
1238 --- a/drivers/ssb/pcihost_wrapper.c
1239 +++ b/drivers/ssb/pcihost_wrapper.c
1240 @@ -12,6 +12,7 @@
1241 */
1242
1243 #include <linux/pci.h>
1244 +#include <linux/slab.h>
1245 #include <linux/ssb/ssb.h>
1246
1247
1248 @@ -58,6 +59,7 @@ static int ssb_pcihost_probe(struct pci_
1249 struct ssb_bus *ssb;
1250 int err = -ENOMEM;
1251 const char *name;
1252 + u32 val;
1253
1254 ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
1255 if (!ssb)
1256 @@ -73,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_
1257 goto err_pci_disable;
1258 pci_set_master(dev);
1259
1260 + /* Disable the RETRY_TIMEOUT register (0x41) to keep
1261 + * PCI Tx retries from interfering with C3 CPU state */
1262 + pci_read_config_dword(dev, 0x40, &val);
1263 + if ((val & 0x0000ff00) != 0)
1264 + pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
1265 +
1266 err = ssb_bus_pcibus_register(ssb, dev);
1267 if (err)
1268 goto err_pci_release_regions;
1269 --- a/drivers/ssb/pcmcia.c
1270 +++ b/drivers/ssb/pcmcia.c
1271 @@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st
1272 ssb_printk(".");
1273 err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
1274 if (err) {
1275 - ssb_printk("\n" KERN_NOTICE PFX
1276 + ssb_printk(KERN_NOTICE PFX
1277 "Failed to write to SPROM.\n");
1278 failed = 1;
1279 break;
1280 @@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st
1281 }
1282 err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
1283 if (err) {
1284 - ssb_printk("\n" KERN_NOTICE PFX
1285 + ssb_printk(KERN_NOTICE PFX
1286 "Could not disable SPROM write access.\n");
1287 failed = 1;
1288 }
1289 @@ -617,134 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
1290 } \
1291 } while (0)
1292
1293 -int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
1294 - struct ssb_init_invariants *iv)
1295 +static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
1296 + tuple_t *tuple,
1297 + void *priv)
1298 {
1299 - tuple_t tuple;
1300 - int res;
1301 - unsigned char buf[32];
1302 + struct ssb_sprom *sprom = priv;
1303 +
1304 + if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
1305 + return -EINVAL;
1306 + if (tuple->TupleDataLen != ETH_ALEN + 2)
1307 + return -EINVAL;
1308 + if (tuple->TupleData[1] != ETH_ALEN)
1309 + return -EINVAL;
1310 + memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
1311 + return 0;
1312 +};
1313 +
1314 +static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
1315 + tuple_t *tuple,
1316 + void *priv)
1317 +{
1318 + struct ssb_init_invariants *iv = priv;
1319 struct ssb_sprom *sprom = &iv->sprom;
1320 struct ssb_boardinfo *bi = &iv->boardinfo;
1321 const char *error_description;
1322
1323 + GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
1324 + switch (tuple->TupleData[0]) {
1325 + case SSB_PCMCIA_CIS_ID:
1326 + GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
1327 + (tuple->TupleDataLen != 7),
1328 + "id tpl size");
1329 + bi->vendor = tuple->TupleData[1] |
1330 + ((u16)tuple->TupleData[2] << 8);
1331 + break;
1332 + case SSB_PCMCIA_CIS_BOARDREV:
1333 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
1334 + "boardrev tpl size");
1335 + sprom->board_rev = tuple->TupleData[1];
1336 + break;
1337 + case SSB_PCMCIA_CIS_PA:
1338 + GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
1339 + (tuple->TupleDataLen != 10),
1340 + "pa tpl size");
1341 + sprom->pa0b0 = tuple->TupleData[1] |
1342 + ((u16)tuple->TupleData[2] << 8);
1343 + sprom->pa0b1 = tuple->TupleData[3] |
1344 + ((u16)tuple->TupleData[4] << 8);
1345 + sprom->pa0b2 = tuple->TupleData[5] |
1346 + ((u16)tuple->TupleData[6] << 8);
1347 + sprom->itssi_a = tuple->TupleData[7];
1348 + sprom->itssi_bg = tuple->TupleData[7];
1349 + sprom->maxpwr_a = tuple->TupleData[8];
1350 + sprom->maxpwr_bg = tuple->TupleData[8];
1351 + break;
1352 + case SSB_PCMCIA_CIS_OEMNAME:
1353 + /* We ignore this. */
1354 + break;
1355 + case SSB_PCMCIA_CIS_CCODE:
1356 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
1357 + "ccode tpl size");
1358 + sprom->country_code = tuple->TupleData[1];
1359 + break;
1360 + case SSB_PCMCIA_CIS_ANTENNA:
1361 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
1362 + "ant tpl size");
1363 + sprom->ant_available_a = tuple->TupleData[1];
1364 + sprom->ant_available_bg = tuple->TupleData[1];
1365 + break;
1366 + case SSB_PCMCIA_CIS_ANTGAIN:
1367 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
1368 + "antg tpl size");
1369 + sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
1370 + sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
1371 + sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
1372 + sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
1373 + sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
1374 + sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
1375 + sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
1376 + sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
1377 + break;
1378 + case SSB_PCMCIA_CIS_BFLAGS:
1379 + GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
1380 + (tuple->TupleDataLen != 5),
1381 + "bfl tpl size");
1382 + sprom->boardflags_lo = tuple->TupleData[1] |
1383 + ((u16)tuple->TupleData[2] << 8);
1384 + break;
1385 + case SSB_PCMCIA_CIS_LEDS:
1386 + GOTO_ERROR_ON(tuple->TupleDataLen != 5,
1387 + "leds tpl size");
1388 + sprom->gpio0 = tuple->TupleData[1];
1389 + sprom->gpio1 = tuple->TupleData[2];
1390 + sprom->gpio2 = tuple->TupleData[3];
1391 + sprom->gpio3 = tuple->TupleData[4];
1392 + break;
1393 + }
1394 + return -ENOSPC; /* continue with next entry */
1395 +
1396 +error:
1397 + ssb_printk(KERN_ERR PFX
1398 + "PCMCIA: Failed to fetch device invariants: %s\n",
1399 + error_description);
1400 + return -ENODEV;
1401 +}
1402 +
1403 +
1404 +int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
1405 + struct ssb_init_invariants *iv)
1406 +{
1407 + struct ssb_sprom *sprom = &iv->sprom;
1408 + int res;
1409 +
1410 memset(sprom, 0xFF, sizeof(*sprom));
1411 sprom->revision = 1;
1412 sprom->boardflags_lo = 0;
1413 sprom->boardflags_hi = 0;
1414
1415 /* First fetch the MAC address. */
1416 - memset(&tuple, 0, sizeof(tuple));
1417 - tuple.DesiredTuple = CISTPL_FUNCE;
1418 - tuple.TupleData = buf;
1419 - tuple.TupleDataMax = sizeof(buf);
1420 - res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
1421 - GOTO_ERROR_ON(res != 0, "MAC first tpl");
1422 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
1423 - GOTO_ERROR_ON(res != 0, "MAC first tpl data");
1424 - while (1) {
1425 - GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
1426 - if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
1427 - break;
1428 - res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
1429 - GOTO_ERROR_ON(res != 0, "MAC next tpl");
1430 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
1431 - GOTO_ERROR_ON(res != 0, "MAC next tpl data");
1432 + res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
1433 + ssb_pcmcia_get_mac, sprom);
1434 + if (res != 0) {
1435 + ssb_printk(KERN_ERR PFX
1436 + "PCMCIA: Failed to fetch MAC address\n");
1437 + return -ENODEV;
1438 }
1439 - GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
1440 - memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
1441
1442 /* Fetch the vendor specific tuples. */
1443 - memset(&tuple, 0, sizeof(tuple));
1444 - tuple.DesiredTuple = SSB_PCMCIA_CIS;
1445 - tuple.TupleData = buf;
1446 - tuple.TupleDataMax = sizeof(buf);
1447 - res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
1448 - GOTO_ERROR_ON(res != 0, "VEN first tpl");
1449 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
1450 - GOTO_ERROR_ON(res != 0, "VEN first tpl data");
1451 - while (1) {
1452 - GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
1453 - switch (tuple.TupleData[0]) {
1454 - case SSB_PCMCIA_CIS_ID:
1455 - GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
1456 - (tuple.TupleDataLen != 7),
1457 - "id tpl size");
1458 - bi->vendor = tuple.TupleData[1] |
1459 - ((u16)tuple.TupleData[2] << 8);
1460 - break;
1461 - case SSB_PCMCIA_CIS_BOARDREV:
1462 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
1463 - "boardrev tpl size");
1464 - sprom->board_rev = tuple.TupleData[1];
1465 - break;
1466 - case SSB_PCMCIA_CIS_PA:
1467 - GOTO_ERROR_ON(tuple.TupleDataLen != 9,
1468 - "pa tpl size");
1469 - sprom->pa0b0 = tuple.TupleData[1] |
1470 - ((u16)tuple.TupleData[2] << 8);
1471 - sprom->pa0b1 = tuple.TupleData[3] |
1472 - ((u16)tuple.TupleData[4] << 8);
1473 - sprom->pa0b2 = tuple.TupleData[5] |
1474 - ((u16)tuple.TupleData[6] << 8);
1475 - sprom->itssi_a = tuple.TupleData[7];
1476 - sprom->itssi_bg = tuple.TupleData[7];
1477 - sprom->maxpwr_a = tuple.TupleData[8];
1478 - sprom->maxpwr_bg = tuple.TupleData[8];
1479 - break;
1480 - case SSB_PCMCIA_CIS_OEMNAME:
1481 - /* We ignore this. */
1482 - break;
1483 - case SSB_PCMCIA_CIS_CCODE:
1484 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
1485 - "ccode tpl size");
1486 - sprom->country_code = tuple.TupleData[1];
1487 - break;
1488 - case SSB_PCMCIA_CIS_ANTENNA:
1489 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
1490 - "ant tpl size");
1491 - sprom->ant_available_a = tuple.TupleData[1];
1492 - sprom->ant_available_bg = tuple.TupleData[1];
1493 - break;
1494 - case SSB_PCMCIA_CIS_ANTGAIN:
1495 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
1496 - "antg tpl size");
1497 - sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
1498 - sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
1499 - sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
1500 - sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
1501 - sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
1502 - sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
1503 - sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
1504 - sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
1505 - break;
1506 - case SSB_PCMCIA_CIS_BFLAGS:
1507 - GOTO_ERROR_ON(tuple.TupleDataLen != 3,
1508 - "bfl tpl size");
1509 - sprom->boardflags_lo = tuple.TupleData[1] |
1510 - ((u16)tuple.TupleData[2] << 8);
1511 - break;
1512 - case SSB_PCMCIA_CIS_LEDS:
1513 - GOTO_ERROR_ON(tuple.TupleDataLen != 5,
1514 - "leds tpl size");
1515 - sprom->gpio0 = tuple.TupleData[1];
1516 - sprom->gpio1 = tuple.TupleData[2];
1517 - sprom->gpio2 = tuple.TupleData[3];
1518 - sprom->gpio3 = tuple.TupleData[4];
1519 - break;
1520 - }
1521 - res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
1522 - if (res == -ENOSPC)
1523 - break;
1524 - GOTO_ERROR_ON(res != 0, "VEN next tpl");
1525 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
1526 - GOTO_ERROR_ON(res != 0, "VEN next tpl data");
1527 - }
1528 + res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
1529 + ssb_pcmcia_do_get_invariants, iv);
1530 + if ((res == 0) || (res == -ENOSPC))
1531 + return 0;
1532
1533 - return 0;
1534 -error:
1535 ssb_printk(KERN_ERR PFX
1536 - "PCMCIA: Failed to fetch device invariants: %s\n",
1537 - error_description);
1538 + "PCMCIA: Failed to fetch device invariants\n");
1539 return -ENODEV;
1540 }
1541
1542 --- a/drivers/ssb/scan.c
1543 +++ b/drivers/ssb/scan.c
1544 @@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid)
1545 static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
1546 u16 offset)
1547 {
1548 + u32 lo, hi;
1549 +
1550 switch (bus->bustype) {
1551 case SSB_BUSTYPE_SSB:
1552 offset += current_coreidx * SSB_CORE_SIZE;
1553 @@ -174,7 +176,12 @@ static u32 scan_read32(struct ssb_bus *b
1554 offset -= 0x800;
1555 } else
1556 ssb_pcmcia_switch_segment(bus, 0);
1557 - break;
1558 + lo = readw(bus->mmio + offset);
1559 + hi = readw(bus->mmio + offset + 2);
1560 + return lo | (hi << 16);
1561 + case SSB_BUSTYPE_SDIO:
1562 + offset += current_coreidx * SSB_CORE_SIZE;
1563 + return ssb_sdio_scan_read32(bus, offset);
1564 }
1565 return readl(bus->mmio + offset);
1566 }
1567 @@ -188,6 +195,8 @@ static int scan_switchcore(struct ssb_bu
1568 return ssb_pci_switch_coreidx(bus, coreidx);
1569 case SSB_BUSTYPE_PCMCIA:
1570 return ssb_pcmcia_switch_coreidx(bus, coreidx);
1571 + case SSB_BUSTYPE_SDIO:
1572 + return ssb_sdio_scan_switch_coreidx(bus, coreidx);
1573 }
1574 return 0;
1575 }
1576 @@ -206,6 +215,8 @@ void ssb_iounmap(struct ssb_bus *bus)
1577 SSB_BUG_ON(1); /* Can't reach this code. */
1578 #endif
1579 break;
1580 + case SSB_BUSTYPE_SDIO:
1581 + break;
1582 }
1583 bus->mmio = NULL;
1584 bus->mapped_device = NULL;
1585 @@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
1586 SSB_BUG_ON(1); /* Can't reach this code. */
1587 #endif
1588 break;
1589 + case SSB_BUSTYPE_SDIO:
1590 + /* Nothing to ioremap in the SDIO case, just fake it */
1591 + mmio = (void __iomem *)baseaddr;
1592 + break;
1593 }
1594
1595 return mmio;
1596 @@ -339,7 +354,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
1597 dev->bus = bus;
1598 dev->ops = bus->ops;
1599
1600 - ssb_dprintk(KERN_INFO PFX
1601 + printk(KERN_DEBUG PFX
1602 "Core %d found: %s "
1603 "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
1604 i, ssb_core_name(dev->id.coreid),
1605 @@ -407,6 +422,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
1606 bus->pcicore.dev = dev;
1607 #endif /* CONFIG_SSB_DRIVER_PCICORE */
1608 break;
1609 + case SSB_DEV_ETHERNET:
1610 + if (bus->bustype == SSB_BUSTYPE_PCI) {
1611 + if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
1612 + (bus->host_pci->device & 0xFF00) == 0x4300) {
1613 + /* This is a dangling ethernet core on a
1614 + * wireless device. Ignore it. */
1615 + continue;
1616 + }
1617 + }
1618 + break;
1619 default:
1620 break;
1621 }
1622 --- /dev/null
1623 +++ b/drivers/ssb/sdio.c
1624 @@ -0,0 +1,610 @@
1625 +/*
1626 + * Sonics Silicon Backplane
1627 + * SDIO-Hostbus related functions
1628 + *
1629 + * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
1630 + *
1631 + * Based on drivers/ssb/pcmcia.c
1632 + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
1633 + * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
1634 + *
1635 + * Licensed under the GNU/GPL. See COPYING for details.
1636 + *
1637 + */
1638 +
1639 +#include <linux/ssb/ssb.h>
1640 +#include <linux/delay.h>
1641 +#include <linux/io.h>
1642 +#include <linux/etherdevice.h>
1643 +#include <linux/mmc/sdio_func.h>
1644 +
1645 +#include "ssb_private.h"
1646 +
1647 +/* Define the following to 1 to enable a printk on each coreswitch. */
1648 +#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 0
1649 +
1650 +
1651 +/* Hardware invariants CIS tuples */
1652 +#define SSB_SDIO_CIS 0x80
1653 +#define SSB_SDIO_CIS_SROMREV 0x00
1654 +#define SSB_SDIO_CIS_ID 0x01
1655 +#define SSB_SDIO_CIS_BOARDREV 0x02
1656 +#define SSB_SDIO_CIS_PA 0x03
1657 +#define SSB_SDIO_CIS_PA_PA0B0_LO 0
1658 +#define SSB_SDIO_CIS_PA_PA0B0_HI 1
1659 +#define SSB_SDIO_CIS_PA_PA0B1_LO 2
1660 +#define SSB_SDIO_CIS_PA_PA0B1_HI 3
1661 +#define SSB_SDIO_CIS_PA_PA0B2_LO 4
1662 +#define SSB_SDIO_CIS_PA_PA0B2_HI 5
1663 +#define SSB_SDIO_CIS_PA_ITSSI 6
1664 +#define SSB_SDIO_CIS_PA_MAXPOW 7
1665 +#define SSB_SDIO_CIS_OEMNAME 0x04
1666 +#define SSB_SDIO_CIS_CCODE 0x05
1667 +#define SSB_SDIO_CIS_ANTENNA 0x06
1668 +#define SSB_SDIO_CIS_ANTGAIN 0x07
1669 +#define SSB_SDIO_CIS_BFLAGS 0x08
1670 +#define SSB_SDIO_CIS_LEDS 0x09
1671 +
1672 +#define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */
1673 +
1674 +
1675 +/*
1676 + * Function 1 miscellaneous registers.
1677 + *
1678 + * Definitions match src/include/sbsdio.h from the
1679 + * Android Open Source Project
1680 + * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
1681 + *
1682 + */
1683 +#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */
1684 +#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */
1685 +#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */
1686 +
1687 +/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
1688 +#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */
1689 +#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */
1690 +#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */
1691 +
1692 +#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */
1693 +
1694 +/* REVISIT: this flag doesn't seem to matter */
1695 +#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */
1696 +
1697 +
1698 +/*
1699 + * Address map within the SDIO function address space (128K).
1700 + *
1701 + * Start End Description
1702 + * ------- ------- ------------------------------------------
1703 + * 0x00000 0x0ffff selected backplane address window (64K)
1704 + * 0x10000 0x1ffff backplane control registers (max 64K)
1705 + *
1706 + * The current address window is configured by writing to registers
1707 + * SBADDRLOW, SBADDRMID and SBADDRHIGH.
1708 + *
1709 + * In order to access the contents of a 32-bit Silicon Backplane address
1710 + * the backplane address window must be first loaded with the highest
1711 + * 16 bits of the target address. Then, an access must be done to the
1712 + * SDIO function address space using the lower 15 bits of the address.
1713 + * Bit 15 of the address must be set when doing 32 bit accesses.
1714 + *
1715 + * 10987654321098765432109876543210
1716 + * WWWWWWWWWWWWWWWWW SB Address Window
1717 + * OOOOOOOOOOOOOOOO Offset within SB Address Window
1718 + * a 32-bit access flag
1719 + */
1720 +
1721 +
1722 +/*
1723 + * SSB I/O via SDIO.
1724 + *
1725 + * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
1726 + */
1727 +
1728 +static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
1729 +{
1730 + return &bus->host_sdio->dev;
1731 +}
1732 +
1733 +/* host claimed */
1734 +static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
1735 +{
1736 + int error = 0;
1737 +
1738 + sdio_writeb(bus->host_sdio, val, addr, &error);
1739 + if (unlikely(error)) {
1740 + dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
1741 + addr, val, error);
1742 + }
1743 +
1744 + return error;
1745 +}
1746 +
1747 +#if 0
1748 +static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
1749 +{
1750 + u8 val;
1751 + int error = 0;
1752 +
1753 + val = sdio_readb(bus->host_sdio, addr, &error);
1754 + if (unlikely(error)) {
1755 + dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
1756 + addr, val, error);
1757 + }
1758 +
1759 + return val;
1760 +}
1761 +#endif
1762 +
1763 +/* host claimed */
1764 +static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
1765 +{
1766 + int error;
1767 +
1768 + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
1769 + (address >> 8) & SBSDIO_SBADDRLOW_MASK);
1770 + if (error)
1771 + goto out;
1772 + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
1773 + (address >> 16) & SBSDIO_SBADDRMID_MASK);
1774 + if (error)
1775 + goto out;
1776 + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
1777 + (address >> 24) & SBSDIO_SBADDRHIGH_MASK);
1778 + if (error)
1779 + goto out;
1780 + bus->sdio_sbaddr = address;
1781 +out:
1782 + if (error) {
1783 + dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
1784 + " to 0x%08x, error %d\n", address, error);
1785 + }
1786 +
1787 + return error;
1788 +}
1789 +
1790 +/* for enumeration use only */
1791 +u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
1792 +{
1793 + u32 val;
1794 + int error;
1795 +
1796 + sdio_claim_host(bus->host_sdio);
1797 + val = sdio_readl(bus->host_sdio, offset, &error);
1798 + sdio_release_host(bus->host_sdio);
1799 + if (unlikely(error)) {
1800 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
1801 + bus->sdio_sbaddr >> 16, offset, val, error);
1802 + }
1803 +
1804 + return val;
1805 +}
1806 +
1807 +/* for enumeration use only */
1808 +int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
1809 +{
1810 + u32 sbaddr;
1811 + int error;
1812 +
1813 + sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
1814 + sdio_claim_host(bus->host_sdio);
1815 + error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
1816 + sdio_release_host(bus->host_sdio);
1817 + if (error) {
1818 + dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
1819 + " error %d\n", coreidx, error);
1820 + goto out;
1821 + }
1822 +out:
1823 + return error;
1824 +}
1825 +
1826 +/* host must be already claimed */
1827 +int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
1828 +{
1829 + u8 coreidx = dev->core_index;
1830 + u32 sbaddr;
1831 + int error = 0;
1832 +
1833 + sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
1834 + if (unlikely(bus->sdio_sbaddr != sbaddr)) {
1835 +#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
1836 + dev_info(ssb_sdio_dev(bus),
1837 + "switching to %s core, index %d\n",
1838 + ssb_core_name(dev->id.coreid), coreidx);
1839 +#endif
1840 + error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
1841 + if (error) {
1842 + dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
1843 + " core %u, error %d\n", coreidx, error);
1844 + goto out;
1845 + }
1846 + bus->mapped_device = dev;
1847 + }
1848 +
1849 +out:
1850 + return error;
1851 +}
1852 +
1853 +static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
1854 +{
1855 + struct ssb_bus *bus = dev->bus;
1856 + u8 val = 0xff;
1857 + int error = 0;
1858 +
1859 + sdio_claim_host(bus->host_sdio);
1860 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1861 + goto out;
1862 + offset |= bus->sdio_sbaddr & 0xffff;
1863 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1864 + val = sdio_readb(bus->host_sdio, offset, &error);
1865 + if (error) {
1866 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
1867 + bus->sdio_sbaddr >> 16, offset, val, error);
1868 + }
1869 +out:
1870 + sdio_release_host(bus->host_sdio);
1871 +
1872 + return val;
1873 +}
1874 +
1875 +static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
1876 +{
1877 + struct ssb_bus *bus = dev->bus;
1878 + u16 val = 0xffff;
1879 + int error = 0;
1880 +
1881 + sdio_claim_host(bus->host_sdio);
1882 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1883 + goto out;
1884 + offset |= bus->sdio_sbaddr & 0xffff;
1885 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1886 + val = sdio_readw(bus->host_sdio, offset, &error);
1887 + if (error) {
1888 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
1889 + bus->sdio_sbaddr >> 16, offset, val, error);
1890 + }
1891 +out:
1892 + sdio_release_host(bus->host_sdio);
1893 +
1894 + return val;
1895 +}
1896 +
1897 +static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
1898 +{
1899 + struct ssb_bus *bus = dev->bus;
1900 + u32 val = 0xffffffff;
1901 + int error = 0;
1902 +
1903 + sdio_claim_host(bus->host_sdio);
1904 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1905 + goto out;
1906 + offset |= bus->sdio_sbaddr & 0xffff;
1907 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1908 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
1909 + val = sdio_readl(bus->host_sdio, offset, &error);
1910 + if (error) {
1911 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
1912 + bus->sdio_sbaddr >> 16, offset, val, error);
1913 + }
1914 +out:
1915 + sdio_release_host(bus->host_sdio);
1916 +
1917 + return val;
1918 +}
1919 +
1920 +#ifdef CONFIG_SSB_BLOCKIO
1921 +static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
1922 + size_t count, u16 offset, u8 reg_width)
1923 +{
1924 + size_t saved_count = count;
1925 + struct ssb_bus *bus = dev->bus;
1926 + int error = 0;
1927 +
1928 + sdio_claim_host(bus->host_sdio);
1929 + if (unlikely(ssb_sdio_switch_core(bus, dev))) {
1930 + error = -EIO;
1931 + memset(buffer, 0xff, count);
1932 + goto err_out;
1933 + }
1934 + offset |= bus->sdio_sbaddr & 0xffff;
1935 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1936 +
1937 + switch (reg_width) {
1938 + case sizeof(u8): {
1939 + error = sdio_readsb(bus->host_sdio, buffer, offset, count);
1940 + break;
1941 + }
1942 + case sizeof(u16): {
1943 + SSB_WARN_ON(count & 1);
1944 + error = sdio_readsb(bus->host_sdio, buffer, offset, count);
1945 + break;
1946 + }
1947 + case sizeof(u32): {
1948 + SSB_WARN_ON(count & 3);
1949 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
1950 + error = sdio_readsb(bus->host_sdio, buffer, offset, count);
1951 + break;
1952 + }
1953 + default:
1954 + SSB_WARN_ON(1);
1955 + }
1956 + if (!error)
1957 + goto out;
1958 +
1959 +err_out:
1960 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
1961 + bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
1962 +out:
1963 + sdio_release_host(bus->host_sdio);
1964 +}
1965 +#endif /* CONFIG_SSB_BLOCKIO */
1966 +
1967 +static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
1968 +{
1969 + struct ssb_bus *bus = dev->bus;
1970 + int error = 0;
1971 +
1972 + sdio_claim_host(bus->host_sdio);
1973 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1974 + goto out;
1975 + offset |= bus->sdio_sbaddr & 0xffff;
1976 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1977 + sdio_writeb(bus->host_sdio, val, offset, &error);
1978 + if (error) {
1979 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
1980 + bus->sdio_sbaddr >> 16, offset, val, error);
1981 + }
1982 +out:
1983 + sdio_release_host(bus->host_sdio);
1984 +}
1985 +
1986 +static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
1987 +{
1988 + struct ssb_bus *bus = dev->bus;
1989 + int error = 0;
1990 +
1991 + sdio_claim_host(bus->host_sdio);
1992 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1993 + goto out;
1994 + offset |= bus->sdio_sbaddr & 0xffff;
1995 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1996 + sdio_writew(bus->host_sdio, val, offset, &error);
1997 + if (error) {
1998 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
1999 + bus->sdio_sbaddr >> 16, offset, val, error);
2000 + }
2001 +out:
2002 + sdio_release_host(bus->host_sdio);
2003 +}
2004 +
2005 +static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
2006 +{
2007 + struct ssb_bus *bus = dev->bus;
2008 + int error = 0;
2009 +
2010 + sdio_claim_host(bus->host_sdio);
2011 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
2012 + goto out;
2013 + offset |= bus->sdio_sbaddr & 0xffff;
2014 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
2015 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
2016 + sdio_writel(bus->host_sdio, val, offset, &error);
2017 + if (error) {
2018 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
2019 + bus->sdio_sbaddr >> 16, offset, val, error);
2020 + }
2021 + if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
2022 + sdio_readl(bus->host_sdio, 0, &error);
2023 +out:
2024 + sdio_release_host(bus->host_sdio);
2025 +}
2026 +
2027 +#ifdef CONFIG_SSB_BLOCKIO
2028 +static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
2029 + size_t count, u16 offset, u8 reg_width)
2030 +{
2031 + size_t saved_count = count;
2032 + struct ssb_bus *bus = dev->bus;
2033 + int error = 0;
2034 +
2035 + sdio_claim_host(bus->host_sdio);
2036 + if (unlikely(ssb_sdio_switch_core(bus, dev))) {
2037 + error = -EIO;
2038 + memset((void *)buffer, 0xff, count);
2039 + goto err_out;
2040 + }
2041 + offset |= bus->sdio_sbaddr & 0xffff;
2042 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
2043 +
2044 + switch (reg_width) {
2045 + case sizeof(u8):
2046 + error = sdio_writesb(bus->host_sdio, offset,
2047 + (void *)buffer, count);
2048 + break;
2049 + case sizeof(u16):
2050 + SSB_WARN_ON(count & 1);
2051 + error = sdio_writesb(bus->host_sdio, offset,
2052 + (void *)buffer, count);
2053 + break;
2054 + case sizeof(u32):
2055 + SSB_WARN_ON(count & 3);
2056 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
2057 + error = sdio_writesb(bus->host_sdio, offset,
2058 + (void *)buffer, count);
2059 + break;
2060 + default:
2061 + SSB_WARN_ON(1);
2062 + }
2063 + if (!error)
2064 + goto out;
2065 +
2066 +err_out:
2067 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
2068 + bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
2069 +out:
2070 + sdio_release_host(bus->host_sdio);
2071 +}
2072 +
2073 +#endif /* CONFIG_SSB_BLOCKIO */
2074 +
2075 +/* Not "static", as it's used in main.c */
2076 +const struct ssb_bus_ops ssb_sdio_ops = {
2077 + .read8 = ssb_sdio_read8,
2078 + .read16 = ssb_sdio_read16,
2079 + .read32 = ssb_sdio_read32,
2080 + .write8 = ssb_sdio_write8,
2081 + .write16 = ssb_sdio_write16,
2082 + .write32 = ssb_sdio_write32,
2083 +#ifdef CONFIG_SSB_BLOCKIO
2084 + .block_read = ssb_sdio_block_read,
2085 + .block_write = ssb_sdio_block_write,
2086 +#endif
2087 +};
2088 +
2089 +#define GOTO_ERROR_ON(condition, description) do { \
2090 + if (unlikely(condition)) { \
2091 + error_description = description; \
2092 + goto error; \
2093 + } \
2094 + } while (0)
2095 +
2096 +int ssb_sdio_get_invariants(struct ssb_bus *bus,
2097 + struct ssb_init_invariants *iv)
2098 +{
2099 + struct ssb_sprom *sprom = &iv->sprom;
2100 + struct ssb_boardinfo *bi = &iv->boardinfo;
2101 + const char *error_description = "none";
2102 + struct sdio_func_tuple *tuple;
2103 + void *mac;
2104 +
2105 + memset(sprom, 0xFF, sizeof(*sprom));
2106 + sprom->boardflags_lo = 0;
2107 + sprom->boardflags_hi = 0;
2108 +
2109 + tuple = bus->host_sdio->tuples;
2110 + while (tuple) {
2111 + switch (tuple->code) {
2112 + case 0x22: /* extended function */
2113 + switch (tuple->data[0]) {
2114 + case CISTPL_FUNCE_LAN_NODE_ID:
2115 + GOTO_ERROR_ON((tuple->size != 7) &&
2116 + (tuple->data[1] != 6),
2117 + "mac tpl size");
2118 + /* fetch the MAC address. */
2119 + mac = tuple->data + 2;
2120 + memcpy(sprom->il0mac, mac, ETH_ALEN);
2121 + memcpy(sprom->et1mac, mac, ETH_ALEN);
2122 + break;
2123 + default:
2124 + break;
2125 + }
2126 + break;
2127 + case 0x80: /* vendor specific tuple */
2128 + switch (tuple->data[0]) {
2129 + case SSB_SDIO_CIS_SROMREV:
2130 + GOTO_ERROR_ON(tuple->size != 2,
2131 + "sromrev tpl size");
2132 + sprom->revision = tuple->data[1];
2133 + break;
2134 + case SSB_SDIO_CIS_ID:
2135 + GOTO_ERROR_ON((tuple->size != 5) &&
2136 + (tuple->size != 7),
2137 + "id tpl size");
2138 + bi->vendor = tuple->data[1] |
2139 + (tuple->data[2]<<8);
2140 + break;
2141 + case SSB_SDIO_CIS_BOARDREV:
2142 + GOTO_ERROR_ON(tuple->size != 2,
2143 + "boardrev tpl size");
2144 + sprom->board_rev = tuple->data[1];
2145 + break;
2146 + case SSB_SDIO_CIS_PA:
2147 + GOTO_ERROR_ON((tuple->size != 9) &&
2148 + (tuple->size != 10),
2149 + "pa tpl size");
2150 + sprom->pa0b0 = tuple->data[1] |
2151 + ((u16)tuple->data[2] << 8);
2152 + sprom->pa0b1 = tuple->data[3] |
2153 + ((u16)tuple->data[4] << 8);
2154 + sprom->pa0b2 = tuple->data[5] |
2155 + ((u16)tuple->data[6] << 8);
2156 + sprom->itssi_a = tuple->data[7];
2157 + sprom->itssi_bg = tuple->data[7];
2158 + sprom->maxpwr_a = tuple->data[8];
2159 + sprom->maxpwr_bg = tuple->data[8];
2160 + break;
2161 + case SSB_SDIO_CIS_OEMNAME:
2162 + /* Not present */
2163 + break;
2164 + case SSB_SDIO_CIS_CCODE:
2165 + GOTO_ERROR_ON(tuple->size != 2,
2166 + "ccode tpl size");
2167 + sprom->country_code = tuple->data[1];
2168 + break;
2169 + case SSB_SDIO_CIS_ANTENNA:
2170 + GOTO_ERROR_ON(tuple->size != 2,
2171 + "ant tpl size");
2172 + sprom->ant_available_a = tuple->data[1];
2173 + sprom->ant_available_bg = tuple->data[1];
2174 + break;
2175 + case SSB_SDIO_CIS_ANTGAIN:
2176 + GOTO_ERROR_ON(tuple->size != 2,
2177 + "antg tpl size");
2178 + sprom->antenna_gain.ghz24.a0 = tuple->data[1];
2179 + sprom->antenna_gain.ghz24.a1 = tuple->data[1];
2180 + sprom->antenna_gain.ghz24.a2 = tuple->data[1];
2181 + sprom->antenna_gain.ghz24.a3 = tuple->data[1];
2182 + sprom->antenna_gain.ghz5.a0 = tuple->data[1];
2183 + sprom->antenna_gain.ghz5.a1 = tuple->data[1];
2184 + sprom->antenna_gain.ghz5.a2 = tuple->data[1];
2185 + sprom->antenna_gain.ghz5.a3 = tuple->data[1];
2186 + break;
2187 + case SSB_SDIO_CIS_BFLAGS:
2188 + GOTO_ERROR_ON((tuple->size != 3) &&
2189 + (tuple->size != 5),
2190 + "bfl tpl size");
2191 + sprom->boardflags_lo = tuple->data[1] |
2192 + ((u16)tuple->data[2] << 8);
2193 + break;
2194 + case SSB_SDIO_CIS_LEDS:
2195 + GOTO_ERROR_ON(tuple->size != 5,
2196 + "leds tpl size");
2197 + sprom->gpio0 = tuple->data[1];
2198 + sprom->gpio1 = tuple->data[2];
2199 + sprom->gpio2 = tuple->data[3];
2200 + sprom->gpio3 = tuple->data[4];
2201 + break;
2202 + default:
2203 + break;
2204 + }
2205 + break;
2206 + default:
2207 + break;
2208 + }
2209 + tuple = tuple->next;
2210 + }
2211 +
2212 + return 0;
2213 +error:
2214 + dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
2215 + error_description);
2216 + return -ENODEV;
2217 +}
2218 +
2219 +void ssb_sdio_exit(struct ssb_bus *bus)
2220 +{
2221 + if (bus->bustype != SSB_BUSTYPE_SDIO)
2222 + return;
2223 + /* Nothing to do here. */
2224 +}
2225 +
2226 +int ssb_sdio_init(struct ssb_bus *bus)
2227 +{
2228 + if (bus->bustype != SSB_BUSTYPE_SDIO)
2229 + return 0;
2230 +
2231 + bus->sdio_sbaddr = ~0;
2232 +
2233 + return 0;
2234 +}
2235 --- a/drivers/ssb/sprom.c
2236 +++ b/drivers/ssb/sprom.c
2237 @@ -13,6 +13,9 @@
2238
2239 #include "ssb_private.h"
2240
2241 +#include <linux/ctype.h>
2242 +#include <linux/slab.h>
2243 +
2244
2245 static const struct ssb_sprom *fallback_sprom;
2246
2247 @@ -33,17 +36,27 @@ static int sprom2hex(const u16 *sprom, c
2248 static int hex2sprom(u16 *sprom, const char *dump, size_t len,
2249 size_t sprom_size_words)
2250 {
2251 - char tmp[5] = { 0 };
2252 - int cnt = 0;
2253 + char c, tmp[5] = { 0 };
2254 + int err, cnt = 0;
2255 unsigned long parsed;
2256
2257 - if (len < sprom_size_words * 2)
2258 + /* Strip whitespace at the end. */
2259 + while (len) {
2260 + c = dump[len - 1];
2261 + if (!isspace(c) && c != '\0')
2262 + break;
2263 + len--;
2264 + }
2265 + /* Length must match exactly. */
2266 + if (len != sprom_size_words * 4)
2267 return -EINVAL;
2268
2269 while (cnt < sprom_size_words) {
2270 memcpy(tmp, dump, 4);
2271 dump += 4;
2272 - parsed = simple_strtoul(tmp, NULL, 16);
2273 + err = strict_strtoul(tmp, 16, &parsed);
2274 + if (err)
2275 + return err;
2276 sprom[cnt++] = swab16((u16)parsed);
2277 }
2278
2279 @@ -90,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
2280 u16 *sprom;
2281 int res = 0, err = -ENOMEM;
2282 size_t sprom_size_words = bus->sprom_size;
2283 + struct ssb_freeze_context freeze;
2284
2285 sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
2286 if (!sprom)
2287 @@ -111,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
2288 err = -ERESTARTSYS;
2289 if (mutex_lock_interruptible(&bus->sprom_mutex))
2290 goto out_kfree;
2291 - err = ssb_devices_freeze(bus);
2292 - if (err == -EOPNOTSUPP) {
2293 - ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
2294 - "No suspend support. Is CONFIG_PM enabled?\n");
2295 - goto out_unlock;
2296 - }
2297 + err = ssb_devices_freeze(bus, &freeze);
2298 if (err) {
2299 ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
2300 goto out_unlock;
2301 }
2302 res = sprom_write(bus, sprom);
2303 - err = ssb_devices_thaw(bus);
2304 + err = ssb_devices_thaw(&freeze);
2305 if (err)
2306 ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
2307 out_unlock:
2308 @@ -167,3 +176,18 @@ const struct ssb_sprom *ssb_get_fallback
2309 {
2310 return fallback_sprom;
2311 }
2312 +
2313 +/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
2314 +bool ssb_is_sprom_available(struct ssb_bus *bus)
2315 +{
2316 + /* status register only exists on chipcomon rev >= 11 and we need check
2317 + for >= 31 only */
2318 + /* this routine differs from specs as we do not access SPROM directly
2319 + on PCMCIA */
2320 + if (bus->bustype == SSB_BUSTYPE_PCI &&
2321 + bus->chipco.dev && /* can be unavailible! */
2322 + bus->chipco.dev->id.revision >= 31)
2323 + return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
2324 +
2325 + return true;
2326 +}
2327 --- a/drivers/ssb/ssb_private.h
2328 +++ b/drivers/ssb/ssb_private.h
2329 @@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct
2330 }
2331 #endif /* CONFIG_SSB_PCMCIAHOST */
2332
2333 +/* sdio.c */
2334 +#ifdef CONFIG_SSB_SDIOHOST
2335 +extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
2336 + struct ssb_init_invariants *iv);
2337 +
2338 +extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
2339 +extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
2340 +extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
2341 +extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
2342 +extern void ssb_sdio_exit(struct ssb_bus *bus);
2343 +extern int ssb_sdio_init(struct ssb_bus *bus);
2344 +
2345 +extern const struct ssb_bus_ops ssb_sdio_ops;
2346 +#else /* CONFIG_SSB_SDIOHOST */
2347 +static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
2348 +{
2349 + return 0;
2350 +}
2351 +static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
2352 + struct ssb_device *dev)
2353 +{
2354 + return 0;
2355 +}
2356 +static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
2357 +{
2358 + return 0;
2359 +}
2360 +static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
2361 +{
2362 + return 0;
2363 +}
2364 +static inline void ssb_sdio_exit(struct ssb_bus *bus)
2365 +{
2366 +}
2367 +static inline int ssb_sdio_init(struct ssb_bus *bus)
2368 +{
2369 + return 0;
2370 +}
2371 +#endif /* CONFIG_SSB_SDIOHOST */
2372 +
2373
2374 /* scan.c */
2375 extern const char *ssb_core_name(u16 coreid);
2376 @@ -136,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f
2377
2378 /* core.c */
2379 extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
2380 -extern int ssb_devices_freeze(struct ssb_bus *bus);
2381 -extern int ssb_devices_thaw(struct ssb_bus *bus);
2382 extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
2383 int ssb_for_each_bus_call(unsigned long data,
2384 int (*func)(struct ssb_bus *bus, unsigned long data));
2385 extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
2386
2387 +struct ssb_freeze_context {
2388 + /* Pointer to the bus */
2389 + struct ssb_bus *bus;
2390 + /* Boolean list to indicate whether a device is frozen on this bus. */
2391 + bool device_frozen[SSB_MAX_NR_CORES];
2392 +};
2393 +extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
2394 +extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
2395 +
2396 +
2397
2398 /* b43_pci_bridge.c */
2399 #ifdef CONFIG_SSB_B43_PCI_BRIDGE
2400 extern int __init b43_pci_ssb_bridge_init(void);
2401 extern void __exit b43_pci_ssb_bridge_exit(void);
2402 -#else /* CONFIG_SSB_B43_PCI_BRIDGR */
2403 +#else /* CONFIG_SSB_B43_PCI_BRIDGE */
2404 static inline int b43_pci_ssb_bridge_init(void)
2405 {
2406 return 0;
2407 @@ -156,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini
2408 static inline void b43_pci_ssb_bridge_exit(void)
2409 {
2410 }
2411 -#endif /* CONFIG_SSB_PCIHOST */
2412 +#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
2413
2414 #endif /* LINUX_SSB_PRIVATE_H_ */
2415 --- a/include/linux/pci_ids.h
2416 +++ b/include/linux/pci_ids.h
2417 @@ -2034,6 +2034,7 @@
2418 #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
2419 #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
2420
2421 +#define PCI_VENDOR_ID_BCM_GVC 0x14a4
2422 #define PCI_VENDOR_ID_BROADCOM 0x14e4
2423 #define PCI_DEVICE_ID_TIGON3_5752 0x1600
2424 #define PCI_DEVICE_ID_TIGON3_5752M 0x1601
2425 --- a/include/linux/ssb/ssb.h
2426 +++ b/include/linux/ssb/ssb.h
2427 @@ -27,24 +27,58 @@ struct ssb_sprom {
2428 u8 et1mdcport; /* MDIO for enet1 */
2429 u8 board_rev; /* Board revision number from SPROM. */
2430 u8 country_code; /* Country Code */
2431 - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
2432 - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
2433 + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
2434 + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
2435 u16 pa0b0;
2436 u16 pa0b1;
2437 u16 pa0b2;
2438 u16 pa1b0;
2439 u16 pa1b1;
2440 u16 pa1b2;
2441 + u16 pa1lob0;
2442 + u16 pa1lob1;
2443 + u16 pa1lob2;
2444 + u16 pa1hib0;
2445 + u16 pa1hib1;
2446 + u16 pa1hib2;
2447 u8 gpio0; /* GPIO pin 0 */
2448 u8 gpio1; /* GPIO pin 1 */
2449 u8 gpio2; /* GPIO pin 2 */
2450 u8 gpio3; /* GPIO pin 3 */
2451 - u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
2452 - u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
2453 + u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
2454 + u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
2455 + u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
2456 + u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
2457 u8 itssi_a; /* Idle TSSI Target for A-PHY */
2458 u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
2459 - u16 boardflags_lo; /* Boardflags (low 16 bits) */
2460 - u16 boardflags_hi; /* Boardflags (high 16 bits) */
2461 + u8 tri2g; /* 2.4GHz TX isolation */
2462 + u8 tri5gl; /* 5.2GHz TX isolation */
2463 + u8 tri5g; /* 5.3GHz TX isolation */
2464 + u8 tri5gh; /* 5.8GHz TX isolation */
2465 + u8 txpid2g[4]; /* 2GHz TX power index */
2466 + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
2467 + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
2468 + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
2469 + u8 rxpo2g; /* 2GHz RX power offset */
2470 + u8 rxpo5g; /* 5GHz RX power offset */
2471 + u8 rssisav2g; /* 2GHz RSSI params */
2472 + u8 rssismc2g;
2473 + u8 rssismf2g;
2474 + u8 bxa2g; /* 2GHz BX arch */
2475 + u8 rssisav5g; /* 5GHz RSSI params */
2476 + u8 rssismc5g;
2477 + u8 rssismf5g;
2478 + u8 bxa5g; /* 5GHz BX arch */
2479 + u16 cck2gpo; /* CCK power offset */
2480 + u32 ofdm2gpo; /* 2.4GHz OFDM power offset */
2481 + u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
2482 + u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
2483 + u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
2484 + u16 boardflags_lo; /* Board flags (bits 0-15) */
2485 + u16 boardflags_hi; /* Board flags (bits 16-31) */
2486 + u16 boardflags2_lo; /* Board flags (bits 32-47) */
2487 + u16 boardflags2_hi; /* Board flags (bits 48-63) */
2488 + /* TODO store board flags in a single u64 */
2489
2490 /* Antenna gain values for up to 4 antennas
2491 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
2492 @@ -58,7 +92,7 @@ struct ssb_sprom {
2493 } ghz5; /* 5GHz band */
2494 } antenna_gain;
2495
2496 - /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
2497 + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
2498 };
2499
2500 /* Information about the PCB the circuitry is soldered on. */
2501 @@ -137,7 +171,7 @@ struct ssb_device {
2502 * is an optimization. */
2503 const struct ssb_bus_ops *ops;
2504
2505 - struct device *dev;
2506 + struct device *dev, *dma_dev;
2507
2508 struct ssb_bus *bus;
2509 struct ssb_device_id id;
2510 @@ -208,6 +242,7 @@ enum ssb_bustype {
2511 SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
2512 SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
2513 SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
2514 + SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
2515 };
2516
2517 /* board_vendor */
2518 @@ -238,20 +273,33 @@ struct ssb_bus {
2519
2520 const struct ssb_bus_ops *ops;
2521
2522 - /* The core in the basic address register window. (PCI bus only) */
2523 + /* The core currently mapped into the MMIO window.
2524 + * Not valid on all host-buses. So don't use outside of SSB. */
2525 struct ssb_device *mapped_device;
2526 - /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
2527 - u8 mapped_pcmcia_seg;
2528 + union {
2529 + /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
2530 + u8 mapped_pcmcia_seg;
2531 + /* Current SSB base address window for SDIO. */
2532 + u32 sdio_sbaddr;
2533 + };
2534 /* Lock for core and segment switching.
2535 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
2536 spinlock_t bar_lock;
2537
2538 - /* The bus this backplane is running on. */
2539 + /* The host-bus this backplane is running on. */
2540 enum ssb_bustype bustype;
2541 - /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
2542 - struct pci_dev *host_pci;
2543 - /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
2544 - struct pcmcia_device *host_pcmcia;
2545 + /* Pointers to the host-bus. Check bustype before using any of these pointers. */
2546 + union {
2547 + /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
2548 + struct pci_dev *host_pci;
2549 + /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
2550 + struct pcmcia_device *host_pcmcia;
2551 + /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
2552 + struct sdio_func *host_sdio;
2553 + };
2554 +
2555 + /* See enum ssb_quirks */
2556 + unsigned int quirks;
2557
2558 #ifdef CONFIG_SSB_SPROM
2559 /* Mutex to protect the SPROM writing. */
2560 @@ -261,6 +309,7 @@ struct ssb_bus {
2561 /* ID information about the Chip. */
2562 u16 chip_id;
2563 u16 chip_rev;
2564 + u16 sprom_offset;
2565 u16 sprom_size; /* number of words in sprom */
2566 u8 chip_package;
2567
2568 @@ -306,6 +355,11 @@ struct ssb_bus {
2569 #endif /* DEBUG */
2570 };
2571
2572 +enum ssb_quirks {
2573 + /* SDIO connected card requires performing a read after writing a 32-bit value */
2574 + SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
2575 +};
2576 +
2577 /* The initialization-invariants. */
2578 struct ssb_init_invariants {
2579 /* Versioning information about the PCB. */
2580 @@ -336,9 +390,18 @@ extern int ssb_bus_pcmciabus_register(st
2581 struct pcmcia_device *pcmcia_dev,
2582 unsigned long baseaddr);
2583 #endif /* CONFIG_SSB_PCMCIAHOST */
2584 +#ifdef CONFIG_SSB_SDIOHOST
2585 +extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
2586 + struct sdio_func *sdio_func,
2587 + unsigned int quirks);
2588 +#endif /* CONFIG_SSB_SDIOHOST */
2589 +
2590
2591 extern void ssb_bus_unregister(struct ssb_bus *bus);
2592
2593 +/* Does the device have an SPROM? */
2594 +extern bool ssb_is_sprom_available(struct ssb_bus *bus);
2595 +
2596 /* Set a fallback SPROM.
2597 * See kdoc at the function definition for complete documentation. */
2598 extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
2599 --- a/include/linux/ssb/ssb_driver_chipcommon.h
2600 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
2601 @@ -53,6 +53,7 @@
2602 #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
2603 #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
2604 #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
2605 +#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */
2606 #define SSB_CHIPCO_CORECTL 0x0008
2607 #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
2608 #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
2609 @@ -385,6 +386,7 @@
2610
2611
2612 /** Chip specific Chip-Status register contents. */
2613 +#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */
2614 #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
2615 #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
2616 #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
2617 @@ -398,6 +400,18 @@
2618 #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
2619 #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
2620
2621 +/** Macros to determine SPROM presence based on Chip-Status register. */
2622 +#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
2623 + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
2624 + SSB_CHIPCO_CHST_4325_OTP_SEL)
2625 +#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
2626 + (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
2627 +#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
2628 + (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
2629 + SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
2630 + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
2631 + SSB_CHIPCO_CHST_4325_OTP_SEL))
2632 +
2633
2634
2635 /** Clockcontrol masks and values **/
2636 @@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
2637 struct ssb_chipcommon {
2638 struct ssb_device *dev;
2639 u32 capabilities;
2640 + u32 status;
2641 /* Fast Powerup Delay constant */
2642 u16 fast_pwrup_delay;
2643 struct ssb_chipcommon_pmu pmu;
2644 @@ -629,5 +644,15 @@ extern int ssb_chipco_serial_init(struct
2645 /* PMU support */
2646 extern void ssb_pmu_init(struct ssb_chipcommon *cc);
2647
2648 +enum ssb_pmu_ldo_volt_id {
2649 + LDO_PAREF = 0,
2650 + LDO_VOLT1,
2651 + LDO_VOLT2,
2652 + LDO_VOLT3,
2653 +};
2654 +
2655 +void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
2656 + enum ssb_pmu_ldo_volt_id id, u32 voltage);
2657 +void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
2658
2659 #endif /* LINUX_SSB_CHIPCO_H_ */
2660 --- a/include/linux/ssb/ssb_regs.h
2661 +++ b/include/linux/ssb/ssb_regs.h
2662 @@ -85,6 +85,8 @@
2663 #define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */
2664 #define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */
2665 #define SSB_IMSTATE_TO 0x00040000 /* Timeout */
2666 +#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */
2667 +#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */
2668 #define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */
2669 #define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
2670 #define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
2671 @@ -162,7 +164,7 @@
2672
2673 /* SPROM shadow area. If not otherwise noted, fields are
2674 * two bytes wide. Note that the SPROM can _only_ be read
2675 - * in two-byte quantinies.
2676 + * in two-byte quantities.
2677 */
2678 #define SSB_SPROMSIZE_WORDS 64
2679 #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
2680 @@ -170,26 +172,27 @@
2681 #define SSB_SPROMSIZE_WORDS_R4 220
2682 #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
2683 #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
2684 -#define SSB_SPROM_BASE 0x1000
2685 -#define SSB_SPROM_REVISION 0x107E
2686 +#define SSB_SPROM_BASE1 0x1000
2687 +#define SSB_SPROM_BASE31 0x0800
2688 +#define SSB_SPROM_REVISION 0x007E
2689 #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
2690 #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
2691 #define SSB_SPROM_REVISION_CRC_SHIFT 8
2692
2693 /* SPROM Revision 1 */
2694 -#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
2695 -#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
2696 -#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
2697 -#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
2698 -#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
2699 -#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
2700 -#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
2701 +#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */
2702 +#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */
2703 +#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */
2704 +#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */
2705 +#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */
2706 +#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */
2707 +#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */
2708 #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
2709 #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
2710 #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
2711 #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
2712 #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
2713 -#define SSB_SPROM1_BINF 0x105C /* Board info */
2714 +#define SSB_SPROM1_BINF 0x005C /* Board info */
2715 #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
2716 #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
2717 #define SSB_SPROM1_BINF_CCODE_SHIFT 8
2718 @@ -197,63 +200,63 @@
2719 #define SSB_SPROM1_BINF_ANTBG_SHIFT 12
2720 #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
2721 #define SSB_SPROM1_BINF_ANTA_SHIFT 14
2722 -#define SSB_SPROM1_PA0B0 0x105E
2723 -#define SSB_SPROM1_PA0B1 0x1060
2724 -#define SSB_SPROM1_PA0B2 0x1062
2725 -#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
2726 +#define SSB_SPROM1_PA0B0 0x005E
2727 +#define SSB_SPROM1_PA0B1 0x0060
2728 +#define SSB_SPROM1_PA0B2 0x0062
2729 +#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */
2730 #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
2731 #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
2732 #define SSB_SPROM1_GPIOA_P1_SHIFT 8
2733 -#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
2734 +#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */
2735 #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
2736 #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
2737 #define SSB_SPROM1_GPIOB_P3_SHIFT 8
2738 -#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
2739 +#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */
2740 #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
2741 #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
2742 #define SSB_SPROM1_MAXPWR_A_SHIFT 8
2743 -#define SSB_SPROM1_PA1B0 0x106A
2744 -#define SSB_SPROM1_PA1B1 0x106C
2745 -#define SSB_SPROM1_PA1B2 0x106E
2746 -#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
2747 +#define SSB_SPROM1_PA1B0 0x006A
2748 +#define SSB_SPROM1_PA1B1 0x006C
2749 +#define SSB_SPROM1_PA1B2 0x006E
2750 +#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */
2751 #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
2752 #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
2753 #define SSB_SPROM1_ITSSI_A_SHIFT 8
2754 -#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
2755 -#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
2756 +#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */
2757 +#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */
2758 #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
2759 #define SSB_SPROM1_AGAIN_BG_SHIFT 0
2760 #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
2761 #define SSB_SPROM1_AGAIN_A_SHIFT 8
2762
2763 /* SPROM Revision 2 (inherits from rev 1) */
2764 -#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
2765 -#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
2766 +#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
2767 +#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */
2768 #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
2769 #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
2770 #define SSB_SPROM2_MAXP_A_LO_SHIFT 8
2771 -#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
2772 -#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
2773 -#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
2774 -#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
2775 -#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
2776 -#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
2777 -#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
2778 +#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */
2779 +#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */
2780 +#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */
2781 +#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */
2782 +#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */
2783 +#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */
2784 +#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */
2785 #define SSB_SPROM2_OPO_VALUE 0x00FF
2786 #define SSB_SPROM2_OPO_UNUSED 0xFF00
2787 -#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
2788 +#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */
2789
2790 /* SPROM Revision 3 (inherits most data from rev 2) */
2791 -#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
2792 -#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
2793 -#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
2794 -#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
2795 -#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
2796 +#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
2797 +#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
2798 +#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
2799 +#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
2800 #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
2801 #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
2802 #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
2803 #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
2804 -#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
2805 +#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */
2806 +#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */
2807 #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
2808 #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
2809 #define SSB_SPROM3_CCKPO_2M_SHIFT 4
2810 @@ -264,104 +267,200 @@
2811 #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
2812
2813 /* SPROM Revision 4 */
2814 -#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
2815 -#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
2816 +#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
2817 +#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
2818 +#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
2819 +#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */
2820 +#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */
2821 +#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */
2822 +#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */
2823 +#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
2824 +#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
2825 +#define SSB_SPROM4_GPIOA_P1_SHIFT 8
2826 +#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */
2827 +#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
2828 +#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
2829 +#define SSB_SPROM4_GPIOB_P3_SHIFT 8
2830 +#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */
2831 #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
2832 #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
2833 #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
2834 #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
2835 #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
2836 -#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
2837 -#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
2838 -#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
2839 -#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
2840 -#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
2841 -#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
2842 -#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
2843 -#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
2844 +#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
2845 +#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
2846 +#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
2847 +#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
2848 +#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
2849 +#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
2850 #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
2851 #define SSB_SPROM4_AGAIN0_SHIFT 0
2852 #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
2853 #define SSB_SPROM4_AGAIN1_SHIFT 8
2854 -#define SSB_SPROM4_AGAIN23 0x1060
2855 +#define SSB_SPROM4_AGAIN23 0x0060
2856 #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
2857 #define SSB_SPROM4_AGAIN2_SHIFT 0
2858 #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
2859 #define SSB_SPROM4_AGAIN3_SHIFT 8
2860 -#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
2861 -#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
2862 +#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */
2863 +#define SSB_SPROM4_TXPID2G0 0x00FF
2864 +#define SSB_SPROM4_TXPID2G0_SHIFT 0
2865 +#define SSB_SPROM4_TXPID2G1 0xFF00
2866 +#define SSB_SPROM4_TXPID2G1_SHIFT 8
2867 +#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */
2868 +#define SSB_SPROM4_TXPID2G2 0x00FF
2869 +#define SSB_SPROM4_TXPID2G2_SHIFT 0
2870 +#define SSB_SPROM4_TXPID2G3 0xFF00
2871 +#define SSB_SPROM4_TXPID2G3_SHIFT 8
2872 +#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */
2873 +#define SSB_SPROM4_TXPID5G0 0x00FF
2874 +#define SSB_SPROM4_TXPID5G0_SHIFT 0
2875 +#define SSB_SPROM4_TXPID5G1 0xFF00
2876 +#define SSB_SPROM4_TXPID5G1_SHIFT 8
2877 +#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */
2878 +#define SSB_SPROM4_TXPID5G2 0x00FF
2879 +#define SSB_SPROM4_TXPID5G2_SHIFT 0
2880 +#define SSB_SPROM4_TXPID5G3 0xFF00
2881 +#define SSB_SPROM4_TXPID5G3_SHIFT 8
2882 +#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */
2883 +#define SSB_SPROM4_TXPID5GL0 0x00FF
2884 +#define SSB_SPROM4_TXPID5GL0_SHIFT 0
2885 +#define SSB_SPROM4_TXPID5GL1 0xFF00
2886 +#define SSB_SPROM4_TXPID5GL1_SHIFT 8
2887 +#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */
2888 +#define SSB_SPROM4_TXPID5GL2 0x00FF
2889 +#define SSB_SPROM4_TXPID5GL2_SHIFT 0
2890 +#define SSB_SPROM4_TXPID5GL3 0xFF00
2891 +#define SSB_SPROM4_TXPID5GL3_SHIFT 8
2892 +#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */
2893 +#define SSB_SPROM4_TXPID5GH0 0x00FF
2894 +#define SSB_SPROM4_TXPID5GH0_SHIFT 0
2895 +#define SSB_SPROM4_TXPID5GH1 0xFF00
2896 +#define SSB_SPROM4_TXPID5GH1_SHIFT 8
2897 +#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */
2898 +#define SSB_SPROM4_TXPID5GH2 0x00FF
2899 +#define SSB_SPROM4_TXPID5GH2_SHIFT 0
2900 +#define SSB_SPROM4_TXPID5GH3 0xFF00
2901 +#define SSB_SPROM4_TXPID5GH3_SHIFT 8
2902 +#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */
2903 #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
2904 #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
2905 #define SSB_SPROM4_ITSSI_BG_SHIFT 8
2906 -#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
2907 +#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */
2908 #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
2909 #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
2910 #define SSB_SPROM4_ITSSI_A_SHIFT 8
2911 -#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
2912 -#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
2913 -#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
2914 -#define SSB_SPROM4_GPIOA_P1_SHIFT 8
2915 -#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
2916 -#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
2917 -#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
2918 -#define SSB_SPROM4_GPIOB_P3_SHIFT 8
2919 -#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
2920 -#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
2921 -#define SSB_SPROM4_PA0B2 0x1086
2922 -#define SSB_SPROM4_PA1B0 0x108E
2923 -#define SSB_SPROM4_PA1B1 0x1090
2924 -#define SSB_SPROM4_PA1B2 0x1092
2925 +#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */
2926 +#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */
2927 +#define SSB_SPROM4_PA0B2 0x0086
2928 +#define SSB_SPROM4_PA1B0 0x008E
2929 +#define SSB_SPROM4_PA1B1 0x0090
2930 +#define SSB_SPROM4_PA1B2 0x0092
2931
2932 /* SPROM Revision 5 (inherits most data from rev 4) */
2933 -#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */
2934 -#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */
2935 -#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */
2936 -#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */
2937 -#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */
2938 +#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */
2939 +#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */
2940 +#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */
2941 +#define SSB_SPROM5_BFL2LO 0x004E /* Board flags 2 (low 16 bits) */
2942 +#define SSB_SPROM5_BFL2HI 0x0050 /* Board flags 2 Hi */
2943 +#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
2944 +#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
2945 #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
2946 #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */
2947 #define SSB_SPROM5_GPIOA_P1_SHIFT 8
2948 -#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */
2949 +#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */
2950 #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */
2951 #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */
2952 #define SSB_SPROM5_GPIOB_P3_SHIFT 8
2953
2954 /* SPROM Revision 8 */
2955 -#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */
2956 -#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */
2957 -#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
2958 -#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
2959 -#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
2960 -#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
2961 -#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
2962 -#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
2963 -#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
2964 -#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */
2965 +#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */
2966 +#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */
2967 +#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */
2968 +#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */
2969 +#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */
2970 +#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */
2971 +#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */
2972 +#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */
2973 +#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
2974 +#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
2975 +#define SSB_SPROM8_GPIOA_P1_SHIFT 8
2976 +#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */
2977 +#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
2978 +#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
2979 +#define SSB_SPROM8_GPIOB_P3_SHIFT 8
2980 +#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
2981 +#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
2982 +#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
2983 +#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
2984 +#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
2985 +#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */
2986 #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */
2987 #define SSB_SPROM8_AGAIN0_SHIFT 0
2988 #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */
2989 #define SSB_SPROM8_AGAIN1_SHIFT 8
2990 -#define SSB_SPROM8_AGAIN23 0x10A0
2991 +#define SSB_SPROM8_AGAIN23 0x00A0
2992 #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */
2993 #define SSB_SPROM8_AGAIN2_SHIFT 0
2994 #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
2995 #define SSB_SPROM8_AGAIN3_SHIFT 8
2996 -#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */
2997 -#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
2998 -#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
2999 -#define SSB_SPROM8_GPIOA_P1_SHIFT 8
3000 -#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */
3001 -#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
3002 -#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
3003 -#define SSB_SPROM8_GPIOB_P3_SHIFT 8
3004 -#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */
3005 -#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
3006 +#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
3007 +#define SSB_SPROM8_RSSISMF2G 0x000F
3008 +#define SSB_SPROM8_RSSISMC2G 0x00F0
3009 +#define SSB_SPROM8_RSSISMC2G_SHIFT 4
3010 +#define SSB_SPROM8_RSSISAV2G 0x0700
3011 +#define SSB_SPROM8_RSSISAV2G_SHIFT 8
3012 +#define SSB_SPROM8_BXA2G 0x1800
3013 +#define SSB_SPROM8_BXA2G_SHIFT 11
3014 +#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */
3015 +#define SSB_SPROM8_RSSISMF5G 0x000F
3016 +#define SSB_SPROM8_RSSISMC5G 0x00F0
3017 +#define SSB_SPROM8_RSSISMC5G_SHIFT 4
3018 +#define SSB_SPROM8_RSSISAV5G 0x0700
3019 +#define SSB_SPROM8_RSSISAV5G_SHIFT 8
3020 +#define SSB_SPROM8_BXA5G 0x1800
3021 +#define SSB_SPROM8_BXA5G_SHIFT 11
3022 +#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */
3023 +#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
3024 +#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
3025 +#define SSB_SPROM8_TRI5G_SHIFT 8
3026 +#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */
3027 +#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
3028 +#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
3029 +#define SSB_SPROM8_TRI5GH_SHIFT 8
3030 +#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
3031 +#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
3032 +#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
3033 +#define SSB_SPROM8_RXPO5G_SHIFT 8
3034 +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
3035 +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
3036 #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
3037 #define SSB_SPROM8_ITSSI_BG_SHIFT 8
3038 -#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */
3039 -#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
3040 +#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */
3041 +#define SSB_SPROM8_PA0B1 0x00C4
3042 +#define SSB_SPROM8_PA0B2 0x00C6
3043 +#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */
3044 +#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
3045 #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
3046 #define SSB_SPROM8_ITSSI_A_SHIFT 8
3047 +#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */
3048 +#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
3049 +#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
3050 +#define SSB_SPROM8_MAXP_AL_SHIFT 8
3051 +#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */
3052 +#define SSB_SPROM8_PA1B1 0x00CE
3053 +#define SSB_SPROM8_PA1B2 0x00D0
3054 +#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */
3055 +#define SSB_SPROM8_PA1LOB1 0x00D4
3056 +#define SSB_SPROM8_PA1LOB2 0x00D6
3057 +#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
3058 +#define SSB_SPROM8_PA1HIB1 0x00DA
3059 +#define SSB_SPROM8_PA1HIB2 0x00DC
3060 +#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
3061 +#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
3062 +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
3063 +#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
3064 +#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
3065
3066 /* Values for SSB_SPROM1_BINF_CCODE */
3067 enum {
Personal OpenWRT clone
This page took 0.161408 seconds and 5 git commands to generate.