target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch

   1 --- a/arch/mips/ath79/mach-db120.c
   2 +++ b/arch/mips/ath79/mach-db120.c
   3 @@ -37,17 +37,26 @@
   4   * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   5   */
   6
   7 +#include <linux/mtd/mtd.h>
   8 +#include <linux/mtd/partitions.h>
   9  #include <linux/pci.h>
  10 +#include <linux/platform_device.h>
  11  #include <linux/ath9k_platform.h>
  12
  13 -#include "machtypes.h"
  14 +#include <asm/mach-ath79/ar71xx_regs.h>
  15 +
  16 +#include "common.h"
  17 +#include "dev-ap9x-pci.h"
  18 +#include "dev-eth.h"
  19  #include "dev-gpio-buttons.h"
  20  #include "dev-leds-gpio.h"
  21 +#include "dev-m25p80.h"
  22  #include "dev-spi.h"
  23  #include "dev-usb.h"
  24  #include "dev-wmac.h"
  25 -#include "pci.h"
  26 +#include "machtypes.h"
  27
  28 +#define DB120_GPIO_LED_USB             11
  29  #define DB120_GPIO_LED_WLAN_5G         12
  30  #define DB120_GPIO_LED_WLAN_2G         13
  31  #define DB120_GPIO_LED_STATUS          14
  32 @@ -58,8 +67,50 @@
  33  #define DB120_KEYS_POLL_INTERVAL       20      /* msecs */
  34  #define DB120_KEYS_DEBOUNCE_INTERVAL   (3 * DB120_KEYS_POLL_INTERVAL)
  35
  36 -#define DB120_WMAC_CALDATA_OFFSET 0x1000
  37 -#define DB120_PCIE_CALDATA_OFFSET 0x5000
  38 +#define DB120_MAC0_OFFSET              0
  39 +#define DB120_MAC1_OFFSET              6
  40 +#define DB120_WMAC_CALDATA_OFFSET      0x1000
  41 +#define DB120_PCIE_CALDATA_OFFSET      0x5000
  42 +
  43 +static struct mtd_partition db120_partitions[] = {
  44 +       {
  45 +               .name           = "u-boot",
  46 +               .offset         = 0,
  47 +               .size           = 0x040000,
  48 +               .mask_flags     = MTD_WRITEABLE,
  49 +       },
  50 +       {
  51 +               .name           = "u-boot-env",
  52 +               .offset         = 0x040000,
  53 +               .size           = 0x010000,
  54 +       },
  55 +       {
  56 +               .name           = "rootfs",
  57 +               .offset         = 0x050000,
  58 +               .size           = 0x630000,
  59 +       },
  60 +       {
  61 +               .name           = "uImage",
  62 +               .offset         = 0x680000,
  63 +               .size           = 0x160000,
  64 +       },
  65 +       {
  66 +               .name           = "NVRAM",
  67 +               .offset         = 0x7E0000,
  68 +               .size           = 0x010000,
  69 +       },
  70 +       {
  71 +               .name           = "ART",
  72 +               .offset         = 0x7F0000,
  73 +               .size           = 0x010000,
  74 +               .mask_flags     = MTD_WRITEABLE,
  75 +       }
  76 +};
  77 +
  78 +static struct flash_platform_data db120_flash_data = {
  79 +       .parts          = db120_partitions,
  80 +       .nr_parts       = ARRAY_SIZE(db120_partitions),
  81 +};
  82
  83  static struct gpio_led db120_leds_gpio[] __initdata = {
  84         {
  85 @@ -82,6 +133,11 @@ static struct gpio_led db120_leds_gpio[]
  86                 .gpio           = DB120_GPIO_LED_WLAN_2G,
  87                 .active_low     = 1,
  88         },
  89 +       {
  90 +               .name           = "db120:green:usb",
  91 +               .gpio           = DB120_GPIO_LED_USB,
  92 +               .active_low     = 1,
  93 +       }
  94  };
  95
  96  static struct gpio_keys_button db120_gpio_keys[] __initdata = {
  97 @@ -95,66 +151,65 @@ static struct gpio_keys_button db120_gpi
  98         },
  99  };
 100
 101 -static struct ath79_spi_controller_data db120_spi0_data = {
 102 -       .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
 103 -       .cs_line = 0,
 104 -};
 105 -
 106 -static struct spi_board_info db120_spi_info[] = {
 107 -       {
 108 -               .bus_num        = 0,
 109 -               .chip_select    = 0,
 110 -               .max_speed_hz   = 25000000,
 111 -               .modalias       = "s25sl064a",
 112 -               .controller_data = &db120_spi0_data,
 113 -       }
 114 -};
 115 -
 116 -static struct ath79_spi_platform_data db120_spi_data = {
 117 -       .bus_num        = 0,
 118 -       .num_chipselect = 1,
 119 -};
 120 -
 121 -#ifdef CONFIG_PCI
 122 -static struct ath9k_platform_data db120_ath9k_data;
 123 -
 124 -static int db120_pci_plat_dev_init(struct pci_dev *dev)
 125 +static void __init db120_gmac_setup(void)
 126  {
 127 -       switch (PCI_SLOT(dev->devfn)) {
 128 -       case 0:
 129 -               dev->dev.platform_data = &db120_ath9k_data;
 130 -               break;
 131 -       }
 132 +       void __iomem *base;
 133 +       u32 t;
 134
 135 -       return 0;
 136 -}
 137 +       base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
 138
 139 -static void __init db120_pci_init(u8 *eeprom)
 140 -{
 141 -       memcpy(db120_ath9k_data.eeprom_data, eeprom,
 142 -              sizeof(db120_ath9k_data.eeprom_data));
 143 +       t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
 144 +       t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
 145 +              AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
 146 +       __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
 147
 148 -       ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
 149 -       ath79_register_pci();
 150 +       iounmap(base);
 151  }
 152 -#else
 153 -static inline void db120_pci_init(void) {}
 154 -#endif /* CONFIG_PCI */
 155
 156  static void __init db120_setup(void)
 157  {
 158         u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 159
 160 +       ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
 161 +       ath79_register_m25p80(&db120_flash_data);
 162 +
 163         ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
 164                                  db120_leds_gpio);
 165         ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
 166                                         ARRAY_SIZE(db120_gpio_keys),
 167                                         db120_gpio_keys);
 168 -       ath79_register_spi(&db120_spi_data, db120_spi_info,
 169 -                          ARRAY_SIZE(db120_spi_info));
 170         ath79_register_usb();
 171         ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
 172 -       db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
 173 +       ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
 174 +
 175 +       db120_gmac_setup();
 176 +
 177 +       ath79_register_mdio(0, 0x0);
 178 +       ath79_register_mdio(1, 0x0);
 179 +
 180 +       ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
 181 +#if 0
 182 +       /* GMAC0 is connected to an AR8327 switch */
 183 +       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 184 +       ath79_eth0_data.speed = SPEED_1000;
 185 +       ath79_eth0_data.duplex = DUPLEX_FULL;
 186 +#else
 187 +       /* GMAC0 is connected to PHY4 of the internal switch */
 188 +       ath79_switch_data.phy4_mii_en = 1;
 189 +
 190 +       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
 191 +       ath79_eth0_data.phy_mask = BIT(4);
 192 +       ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
 193 +#endif
 194 +       ath79_register_eth(0);
 195 +
 196 +       /* GMAC1 is connected to the internal switch */
 197 +       ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
 198 +       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
 199 +       ath79_eth1_data.speed = SPEED_1000;
 200 +       ath79_eth1_data.duplex = DUPLEX_FULL;
 201 +
 202 +       ath79_register_eth(1);
 203  }
 204
 205  MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
 206 --- a/arch/mips/ath79/Kconfig
 207 +++ b/arch/mips/ath79/Kconfig
 208 @@ -31,9 +31,11 @@ config ATH79_MACH_AP81
 209  config ATH79_MACH_DB120
 210         bool "Atheros DB120 reference board"
 211         select SOC_AR934X
 212 +       select ATH79_DEV_AP9X_PCI if PCI
 213 +       select ATH79_DEV_ETH
 214         select ATH79_DEV_GPIO_BUTTONS
 215         select ATH79_DEV_LEDS_GPIO
 216 -       select ATH79_DEV_SPI
 217 +       select ATH79_DEV_M25P80
 218         select ATH79_DEV_USB
 219         select ATH79_DEV_WMAC
 220         help