package/libertas/src/host.h

   1 /**
   2   * This file contains definitions of WLAN commands.
   3   */
   4
   5 #ifndef _LBS_HOST_H_
   6 #define _LBS_HOST_H_
   7
   8 /** PUBLIC DEFINITIONS */
   9 #define DEFAULT_AD_HOC_CHANNEL                  6
  10 #define DEFAULT_AD_HOC_CHANNEL_A                36
  11
  12 /** IEEE 802.11 oids */
  13 #define OID_802_11_SSID                         0x00008002
  14 #define OID_802_11_INFRASTRUCTURE_MODE          0x00008008
  15 #define OID_802_11_FRAGMENTATION_THRESHOLD      0x00008009
  16 #define OID_802_11_RTS_THRESHOLD                0x0000800A
  17 #define OID_802_11_TX_ANTENNA_SELECTED          0x0000800D
  18 #define OID_802_11_SUPPORTED_RATES              0x0000800E
  19 #define OID_802_11_STATISTICS                   0x00008012
  20 #define OID_802_11_TX_RETRYCOUNT                0x0000801D
  21 #define OID_802_11D_ENABLE                      0x00008020
  22
  23 #define CMD_OPTION_WAITFORRSP                   0x0002
  24
  25 /** Host command IDs */
  26
  27 /* Return command are almost always the same as the host command, but with
  28  * bit 15 set high.  There are a few exceptions, though...
  29  */
  30 #define CMD_RET(cmd)                    (0x8000 | cmd)
  31
  32 /* Return command convention exceptions: */
  33 #define CMD_RET_802_11_ASSOCIATE                0x8012
  34
  35 /* Command codes */
  36 #define CMD_GET_HW_SPEC                         0x0003
  37 #define CMD_EEPROM_UPDATE                       0x0004
  38 #define CMD_802_11_RESET                        0x0005
  39 #define CMD_802_11_SCAN                         0x0006
  40 #define CMD_802_11_GET_LOG                      0x000b
  41 #define CMD_MAC_MULTICAST_ADR                   0x0010
  42 #define CMD_802_11_AUTHENTICATE                 0x0011
  43 #define CMD_802_11_EEPROM_ACCESS                0x0059
  44 #define CMD_802_11_ASSOCIATE                    0x0050
  45 #define CMD_802_11_SET_WEP                      0x0013
  46 #define CMD_802_11_GET_STAT                     0x0014
  47 #define CMD_802_3_GET_STAT                      0x0015
  48 #define CMD_802_11_SNMP_MIB                     0x0016
  49 #define CMD_MAC_REG_MAP                         0x0017
  50 #define CMD_BBP_REG_MAP                         0x0018
  51 #define CMD_MAC_REG_ACCESS                      0x0019
  52 #define CMD_BBP_REG_ACCESS                      0x001a
  53 #define CMD_RF_REG_ACCESS                       0x001b
  54 #define CMD_802_11_RADIO_CONTROL                0x001c
  55 #define CMD_802_11_RF_CHANNEL                   0x001d
  56 #define CMD_802_11_RF_TX_POWER                  0x001e
  57 #define CMD_802_11_RSSI                         0x001f
  58 #define CMD_802_11_RF_ANTENNA                   0x0020
  59 #define CMD_802_11_PS_MODE                      0x0021
  60 #define CMD_802_11_DATA_RATE                    0x0022
  61 #define CMD_RF_REG_MAP                          0x0023
  62 #define CMD_802_11_DEAUTHENTICATE               0x0024
  63 #define CMD_802_11_REASSOCIATE                  0x0025
  64 #define CMD_802_11_DISASSOCIATE                 0x0026
  65 #define CMD_MAC_CONTROL                         0x0028
  66 #define CMD_802_11_AD_HOC_START                 0x002b
  67 #define CMD_802_11_AD_HOC_JOIN                  0x002c
  68 #define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
  69 #define CMD_802_11_ENABLE_RSN                   0x002f
  70 #define CMD_802_11_SET_AFC                      0x003c
  71 #define CMD_802_11_GET_AFC                      0x003d
  72 #define CMD_802_11_AD_HOC_STOP                  0x0040
  73 #define CMD_802_11_HOST_SLEEP_CFG               0x0043
  74 #define CMD_802_11_WAKEUP_CONFIRM               0x0044
  75 #define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
  76 #define CMD_802_11_BEACON_STOP                  0x0049
  77 #define CMD_802_11_MAC_ADDRESS                  0x004d
  78 #define CMD_802_11_LED_GPIO_CTRL                0x004e
  79 #define CMD_802_11_EEPROM_ACCESS                0x0059
  80 #define CMD_802_11_BAND_CONFIG                  0x0058
  81 #define CMD_802_11D_DOMAIN_INFO                 0x005b
  82 #define CMD_802_11_KEY_MATERIAL                 0x005e
  83 #define CMD_802_11_SLEEP_PARAMS                 0x0066
  84 #define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
  85 #define CMD_802_11_SLEEP_PERIOD                 0x0068
  86 #define CMD_802_11_TPC_CFG                      0x0072
  87 #define CMD_802_11_FW_WAKE_METHOD               0x0074
  88 #define CMD_802_11_SUBSCRIBE_EVENT              0x0075
  89 #define CMD_802_11_RATE_ADAPT_RATESET           0x0076
  90 #define CMD_802_11_TX_RATE_QUERY                0x007f
  91 #define CMD_GET_TSF                             0x0080
  92 #define CMD_BT_ACCESS                           0x0087
  93 #define CMD_FWT_ACCESS                          0x0095
  94 #define CMD_802_11_MONITOR_MODE                 0x0098
  95 #define CMD_MESH_ACCESS                         0x009b
  96 #define CMD_MESH_CONFIG                         0x00a3
  97 #define CMD_SET_BOOT2_VER                       0x00a5
  98 #define CMD_802_11_BEACON_CTRL                  0x00b0
  99
 100 /* For the IEEE Power Save */
 101 #define CMD_SUBCMD_ENTER_PS             0x0030
 102 #define CMD_SUBCMD_EXIT_PS              0x0031
 103 #define CMD_SUBCMD_SLEEP_CONFIRMED      0x0034
 104 #define CMD_SUBCMD_FULL_POWERDOWN       0x0035
 105 #define CMD_SUBCMD_FULL_POWERUP         0x0036
 106
 107 #define CMD_ENABLE_RSN                  0x0001
 108 #define CMD_DISABLE_RSN                 0x0000
 109
 110 #define CMD_ACT_GET                     0x0000
 111 #define CMD_ACT_SET                     0x0001
 112 #define CMD_ACT_GET_AES                 0x0002
 113 #define CMD_ACT_SET_AES                 0x0003
 114 #define CMD_ACT_REMOVE_AES              0x0004
 115
 116 /* Define action or option for CMD_802_11_SET_WEP */
 117 #define CMD_ACT_ADD                     0x0002
 118 #define CMD_ACT_REMOVE                  0x0004
 119 #define CMD_ACT_USE_DEFAULT             0x0008
 120
 121 #define CMD_TYPE_WEP_40_BIT             0x01
 122 #define CMD_TYPE_WEP_104_BIT            0x02
 123
 124 #define CMD_NUM_OF_WEP_KEYS             4
 125
 126 #define CMD_WEP_KEY_INDEX_MASK          0x3fff
 127
 128 /* Define action or option for CMD_802_11_RESET */
 129 #define CMD_ACT_HALT                    0x0003
 130
 131 /* Define action or option for CMD_802_11_SCAN */
 132 #define CMD_BSS_TYPE_BSS                0x0001
 133 #define CMD_BSS_TYPE_IBSS               0x0002
 134 #define CMD_BSS_TYPE_ANY                0x0003
 135
 136 /* Define action or option for CMD_802_11_SCAN */
 137 #define CMD_SCAN_TYPE_ACTIVE            0x0000
 138 #define CMD_SCAN_TYPE_PASSIVE           0x0001
 139
 140 #define CMD_SCAN_RADIO_TYPE_BG          0
 141
 142 #define CMD_SCAN_PROBE_DELAY_TIME       0
 143
 144 /* Define action or option for CMD_MAC_CONTROL */
 145 #define CMD_ACT_MAC_RX_ON                       0x0001
 146 #define CMD_ACT_MAC_TX_ON                       0x0002
 147 #define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
 148 #define CMD_ACT_MAC_WEP_ENABLE                  0x0008
 149 #define CMD_ACT_MAC_INT_ENABLE                  0x0010
 150 #define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
 151 #define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
 152 #define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
 153 #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
 154 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
 155
 156 /* Define action or option for CMD_802_11_RADIO_CONTROL */
 157 #define CMD_TYPE_AUTO_PREAMBLE          0x0001
 158 #define CMD_TYPE_SHORT_PREAMBLE         0x0002
 159 #define CMD_TYPE_LONG_PREAMBLE          0x0003
 160
 161 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
 162 #define CMD_SUBSCRIBE_RSSI_LOW          0x0001
 163 #define CMD_SUBSCRIBE_SNR_LOW           0x0002
 164 #define CMD_SUBSCRIBE_FAILCOUNT         0x0004
 165 #define CMD_SUBSCRIBE_BCNMISS           0x0008
 166 #define CMD_SUBSCRIBE_RSSI_HIGH         0x0010
 167 #define CMD_SUBSCRIBE_SNR_HIGH          0x0020
 168
 169 #define TURN_ON_RF                      0x01
 170 #define RADIO_ON                        0x01
 171 #define RADIO_OFF                       0x00
 172
 173 #define SET_AUTO_PREAMBLE               0x05
 174 #define SET_SHORT_PREAMBLE              0x03
 175 #define SET_LONG_PREAMBLE               0x01
 176
 177 /* Define action or option for CMD_802_11_RF_CHANNEL */
 178 #define CMD_OPT_802_11_RF_CHANNEL_GET   0x00
 179 #define CMD_OPT_802_11_RF_CHANNEL_SET   0x01
 180
 181 /* Define action or option for CMD_802_11_RF_TX_POWER */
 182 #define CMD_ACT_TX_POWER_OPT_GET        0x0000
 183 #define CMD_ACT_TX_POWER_OPT_SET_HIGH   0x8007
 184 #define CMD_ACT_TX_POWER_OPT_SET_MID    0x8004
 185 #define CMD_ACT_TX_POWER_OPT_SET_LOW    0x8000
 186
 187 #define CMD_ACT_TX_POWER_INDEX_HIGH     0x0007
 188 #define CMD_ACT_TX_POWER_INDEX_MID      0x0004
 189 #define CMD_ACT_TX_POWER_INDEX_LOW      0x0000
 190
 191 /* Define action or option for CMD_802_11_DATA_RATE */
 192 #define CMD_ACT_SET_TX_AUTO             0x0000
 193 #define CMD_ACT_SET_TX_FIX_RATE         0x0001
 194 #define CMD_ACT_GET_TX_RATE             0x0002
 195
 196 #define CMD_ACT_SET_RX                  0x0001
 197 #define CMD_ACT_SET_TX                  0x0002
 198 #define CMD_ACT_SET_BOTH                0x0003
 199 #define CMD_ACT_GET_RX                  0x0004
 200 #define CMD_ACT_GET_TX                  0x0008
 201 #define CMD_ACT_GET_BOTH                0x000c
 202
 203 /* Define action or option for CMD_802_11_PS_MODE */
 204 #define CMD_TYPE_CAM                    0x0000
 205 #define CMD_TYPE_MAX_PSP                0x0001
 206 #define CMD_TYPE_FAST_PSP               0x0002
 207
 208 /* Options for CMD_802_11_FW_WAKE_METHOD */
 209 #define CMD_WAKE_METHOD_UNCHANGED       0x0000
 210 #define CMD_WAKE_METHOD_COMMAND_INT     0x0001
 211 #define CMD_WAKE_METHOD_GPIO            0x0002
 212
 213 /* Define action or option for CMD_BT_ACCESS */
 214 enum cmd_bt_access_opts {
 215         /* The bt commands start at 5 instead of 1 because the old dft commands
 216          * are mapped to 1-4.  These old commands are no longer maintained and
 217          * should not be called.
 218          */
 219         CMD_ACT_BT_ACCESS_ADD = 5,
 220         CMD_ACT_BT_ACCESS_DEL,
 221         CMD_ACT_BT_ACCESS_LIST,
 222         CMD_ACT_BT_ACCESS_RESET,
 223         CMD_ACT_BT_ACCESS_SET_INVERT,
 224         CMD_ACT_BT_ACCESS_GET_INVERT
 225 };
 226
 227 /* Define action or option for CMD_FWT_ACCESS */
 228 enum cmd_fwt_access_opts {
 229         CMD_ACT_FWT_ACCESS_ADD = 1,
 230         CMD_ACT_FWT_ACCESS_DEL,
 231         CMD_ACT_FWT_ACCESS_LOOKUP,
 232         CMD_ACT_FWT_ACCESS_LIST,
 233         CMD_ACT_FWT_ACCESS_LIST_ROUTE,
 234         CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
 235         CMD_ACT_FWT_ACCESS_RESET,
 236         CMD_ACT_FWT_ACCESS_CLEANUP,
 237         CMD_ACT_FWT_ACCESS_TIME,
 238 };
 239
 240 /* Define action or option for CMD_MESH_ACCESS */
 241 enum cmd_mesh_access_opts {
 242         CMD_ACT_MESH_GET_TTL = 1,
 243         CMD_ACT_MESH_SET_TTL,
 244         CMD_ACT_MESH_GET_STATS,
 245         CMD_ACT_MESH_GET_ANYCAST,
 246         CMD_ACT_MESH_SET_ANYCAST,
 247         CMD_ACT_MESH_SET_LINK_COSTS,
 248         CMD_ACT_MESH_GET_LINK_COSTS,
 249         CMD_ACT_MESH_SET_BCAST_RATE,
 250         CMD_ACT_MESH_GET_BCAST_RATE,
 251         CMD_ACT_MESH_SET_RREQ_DELAY,
 252         CMD_ACT_MESH_GET_RREQ_DELAY,
 253         CMD_ACT_MESH_SET_ROUTE_EXP,
 254         CMD_ACT_MESH_GET_ROUTE_EXP,
 255         CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
 256         CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
 257 };
 258
 259 /** Card Event definition */
 260 #define MACREG_INT_CODE_TX_PPA_FREE             0
 261 #define MACREG_INT_CODE_TX_DMA_DONE             1
 262 #define MACREG_INT_CODE_LINK_LOST_W_SCAN        2
 263 #define MACREG_INT_CODE_LINK_LOST_NO_SCAN       3
 264 #define MACREG_INT_CODE_LINK_SENSED             4
 265 #define MACREG_INT_CODE_CMD_FINISHED            5
 266 #define MACREG_INT_CODE_MIB_CHANGED             6
 267 #define MACREG_INT_CODE_INIT_DONE               7
 268 #define MACREG_INT_CODE_DEAUTHENTICATED         8
 269 #define MACREG_INT_CODE_DISASSOCIATED           9
 270 #define MACREG_INT_CODE_PS_AWAKE                10
 271 #define MACREG_INT_CODE_PS_SLEEP                11
 272 #define MACREG_INT_CODE_MIC_ERR_MULTICAST       13
 273 #define MACREG_INT_CODE_MIC_ERR_UNICAST         14
 274 #define MACREG_INT_CODE_WM_AWAKE                15
 275 #define MACREG_INT_CODE_DEEP_SLEEP_AWAKE        16
 276 #define MACREG_INT_CODE_ADHOC_BCN_LOST          17
 277 #define MACREG_INT_CODE_HOST_AWAKE              18
 278 #define MACREG_INT_CODE_STOP_TX                 19
 279 #define MACREG_INT_CODE_START_TX                20
 280 #define MACREG_INT_CODE_CHANNEL_SWITCH          21
 281 #define MACREG_INT_CODE_MEASUREMENT_RDY         22
 282 #define MACREG_INT_CODE_WMM_CHANGE              23
 283 #define MACREG_INT_CODE_BG_SCAN_REPORT          24
 284 #define MACREG_INT_CODE_RSSI_LOW                25
 285 #define MACREG_INT_CODE_SNR_LOW                 26
 286 #define MACREG_INT_CODE_MAX_FAIL                27
 287 #define MACREG_INT_CODE_RSSI_HIGH               28
 288 #define MACREG_INT_CODE_SNR_HIGH                29
 289 #define MACREG_INT_CODE_MESH_AUTO_STARTED       35
 290 #define MACREG_INT_CODE_FIRMWARE_READY          48
 291
 292 #endif