Disable NAPI by default (#1671)
[openwrt.git] / target / linux / ar7-2.6 / files / arch / mips / ar7 / vlynq-pci.c
1 /*
2 * $Id$
3 *
4 * Copyright (C) 2006, 2007 OpenWrt.org
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19 */
20
21 #include <linux/types.h>
22 #include <linux/pci.h>
23 #include <linux/kernel.h>
24 #include <linux/init.h>
25 #include <linux/irq.h>
26 #include <asm/ar7/vlynq.h>
27
28 #define VLYNQ_PCI_SLOTS 2
29
30 struct vlynq_reg_config {
31 u32 offset;
32 u32 value;
33 };
34
35 struct vlynq_pci_config {
36 u32 chip_id;
37 char name[32];
38 struct vlynq_mapping rx_mapping[4];
39 int irq;
40 int irq_type;
41 u32 chip;
42 u32 class;
43 int num_regs;
44 struct vlynq_reg_config regs[10];
45 };
46
47 struct vlynq_pci_private {
48 u32 latency;
49 u32 cache_line;
50 u32 command;
51 u32 sz_mask;
52 struct vlynq_pci_config *config;
53 };
54
55 static struct vlynq_pci_config known_devices[] = {
56 {
57 .chip_id = 0x00000009, .name = "TI ACX111",
58 .rx_mapping = {
59 { .size = 0x22000, .offset = 0xf0000000 },
60 { .size = 0x40000, .offset = 0xc0000000 },
61 { .size = 0x0, .offset = 0x0 },
62 { .size = 0x0, .offset = 0x0 },
63 },
64 .irq = 0, .chip = 0x9066104c,
65 .irq_type = IRQ_TYPE_EDGE_RISING,
66 .class = PCI_CLASS_NETWORK_OTHER,
67 .num_regs = 5,
68 .regs = {
69 { .offset = 0x790, .value = (0xd0000000 - (ARCH_PFN_OFFSET << PAGE_SHIFT)) },
70 { .offset = 0x794, .value = (0xd0000000 - (ARCH_PFN_OFFSET << PAGE_SHIFT)) },
71 { .offset = 0x740, .value = 0 },
72 { .offset = 0x744, .value = 0x00010000 },
73 { .offset = 0x764, .value = 0x00010000 },
74 },
75 },
76 };
77
78 static struct vlynq_device *slots[VLYNQ_PCI_SLOTS] = { NULL, };
79
80 static struct resource vlynq_io_resource = {
81 .start = 0x00000000,
82 .end = 0x00000000,
83 .name = "pci IO space",
84 .flags = IORESOURCE_IO
85 };
86
87 static struct resource vlynq_mem_resource = {
88 .start = 0x00000000,
89 .end = 0x00000000,
90 .name = "pci memory space",
91 .flags = IORESOURCE_MEM
92 };
93
94 static inline u32 vlynq_get_mapped(struct vlynq_device *dev, int res)
95 {
96 int i;
97 struct vlynq_pci_private *priv = dev->priv;
98 u32 ret = dev->mem_start;
99 if (!priv->config->rx_mapping[res].size) return 0;
100 for (i = 0; i < res; i++)
101 ret += priv->config->rx_mapping[i].size;
102
103 return ret;
104 }
105
106 static inline u32 vlynq_read(u32 val, int size) {
107 switch (size) {
108 case 1:
109 return *(u8 *)&val;
110 case 2:
111 return *(u16 *)&val;
112 }
113 return val;
114 }
115
116 static int vlynq_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
117 {
118 struct vlynq_device *dev;
119 struct vlynq_pci_private *priv;
120 int resno, slot = PCI_SLOT(devfn);
121
122 if ((size == 2) && (where & 1))
123 return PCIBIOS_BAD_REGISTER_NUMBER;
124 else if ((size == 4) && (where & 3))
125 return PCIBIOS_BAD_REGISTER_NUMBER;
126
127 if (slot >= VLYNQ_PCI_SLOTS)
128 return PCIBIOS_DEVICE_NOT_FOUND;
129
130 dev = slots[slot];
131
132 if (!dev || (PCI_FUNC(devfn) > 0))
133 return PCIBIOS_DEVICE_NOT_FOUND;
134
135 priv = dev->priv;
136
137 switch (where) {
138 case PCI_VENDOR_ID:
139 *val = vlynq_read(priv->config->chip, size);
140 break;
141 case PCI_DEVICE_ID:
142 *val = priv->config->chip & 0xffff;
143 case PCI_COMMAND:
144 *val = priv->command;
145 case PCI_STATUS:
146 /* *val = PCI_STATUS_CAP_LIST;*/
147 *val = 0;
148 break;
149 case PCI_CLASS_REVISION:
150 *val = priv->config->class;
151 break;
152 case PCI_LATENCY_TIMER:
153 *val = priv->latency;
154 break;
155 case PCI_HEADER_TYPE:
156 *val = PCI_HEADER_TYPE_NORMAL;
157 break;
158 case PCI_CACHE_LINE_SIZE:
159 *val = priv->cache_line;
160 break;
161 case PCI_BASE_ADDRESS_0:
162 case PCI_BASE_ADDRESS_1:
163 case PCI_BASE_ADDRESS_2:
164 case PCI_BASE_ADDRESS_3:
165 resno = (where - PCI_BASE_ADDRESS_0) >> 2;
166 if (priv->sz_mask & (1 << resno)) {
167 priv->sz_mask &= ~(1 << resno);
168 *val = priv->config->rx_mapping[resno].size;
169 } else {
170 *val = vlynq_get_mapped(dev, resno);
171 }
172 break;
173 case PCI_BASE_ADDRESS_4:
174 case PCI_BASE_ADDRESS_5:
175 case PCI_SUBSYSTEM_VENDOR_ID:
176 case PCI_SUBSYSTEM_ID:
177 case PCI_ROM_ADDRESS:
178 case PCI_INTERRUPT_LINE:
179 case PCI_CARDBUS_CIS:
180 case PCI_CAPABILITY_LIST:
181 *val = 0;
182 break;
183 case PCI_INTERRUPT_PIN:
184 *val = 1;
185 break;
186 default:
187 printk("%s: Read of unknown register 0x%x (size %d)\n",
188 dev->dev.bus_id, where, size);
189 return PCIBIOS_BAD_REGISTER_NUMBER;
190 }
191 return PCIBIOS_SUCCESSFUL;
192 }
193
194 static int vlynq_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
195 {
196 struct vlynq_device *dev;
197 struct vlynq_pci_private *priv;
198 int resno, slot = PCI_SLOT(devfn);
199
200 if ((size == 2) && (where & 1))
201 return PCIBIOS_BAD_REGISTER_NUMBER;
202 else if ((size == 4) && (where & 3))
203 return PCIBIOS_BAD_REGISTER_NUMBER;
204
205 if (slot >= VLYNQ_PCI_SLOTS)
206 return PCIBIOS_DEVICE_NOT_FOUND;
207
208 dev = slots[slot];
209
210 if (!dev || (PCI_FUNC(devfn) > 0))
211 return PCIBIOS_DEVICE_NOT_FOUND;
212
213 priv = dev->priv;
214
215 switch (where) {
216 case PCI_VENDOR_ID:
217 case PCI_DEVICE_ID:
218 case PCI_STATUS:
219 case PCI_CLASS_REVISION:
220 case PCI_HEADER_TYPE:
221 case PCI_CACHE_LINE_SIZE:
222 case PCI_SUBSYSTEM_VENDOR_ID:
223 case PCI_SUBSYSTEM_ID:
224 case PCI_INTERRUPT_LINE:
225 case PCI_INTERRUPT_PIN:
226 case PCI_CARDBUS_CIS:
227 case PCI_CAPABILITY_LIST:
228 return PCIBIOS_FUNC_NOT_SUPPORTED;
229 case PCI_COMMAND:
230 priv->command = val;
231 case PCI_LATENCY_TIMER:
232 priv->latency = val;
233 break;
234 case PCI_BASE_ADDRESS_0:
235 case PCI_BASE_ADDRESS_1:
236 case PCI_BASE_ADDRESS_2:
237 case PCI_BASE_ADDRESS_3:
238 if (val == 0xffffffff) {
239 resno = (where - PCI_BASE_ADDRESS_0) >> 2;
240 priv->sz_mask |= (1 << resno);
241 break;
242 }
243 case PCI_BASE_ADDRESS_4:
244 case PCI_BASE_ADDRESS_5:
245 case PCI_ROM_ADDRESS:
246 break;
247 default:
248 printk("%s: Write to unknown register 0x%x (size %d) value=0x%x\n",
249 dev->dev.bus_id, where, size, val);
250 return PCIBIOS_BAD_REGISTER_NUMBER;
251 }
252 return PCIBIOS_SUCCESSFUL;
253 }
254
255 static struct pci_ops vlynq_pci_ops = {
256 vlynq_config_read,
257 vlynq_config_write
258 };
259
260 static struct pci_controller vlynq_controller = {
261 .pci_ops = &vlynq_pci_ops,
262 .io_resource = &vlynq_io_resource,
263 .mem_resource = &vlynq_mem_resource,
264 };
265
266 static int vlynq_pci_probe(struct vlynq_device *dev)
267 {
268 int result, i;
269 u32 chip_id, addr;
270 struct vlynq_pci_private *priv;
271 struct vlynq_mapping mapping[4] = { { 0, }, };
272 struct vlynq_pci_config *config = NULL;
273
274 result = vlynq_set_local_irq(dev, 31);
275 if (result)
276 return result;
277
278 result = vlynq_set_remote_irq(dev, 30);
279 if (result)
280 return result;
281
282 result = vlynq_device_enable(dev);
283 if (result)
284 return result;
285
286 chip_id = vlynq_remote_id(dev);
287 for (i = 0; i < ARRAY_SIZE(known_devices); i++)
288 if (chip_id == known_devices[i].chip_id)
289 config = &known_devices[i];
290
291 if (!config) {
292 printk("vlynq-pci: skipping unknown device "
293 "%04x:%04x at %s\n", chip_id >> 16,
294 chip_id & 0xffff, dev->dev.bus_id);
295 result = -ENODEV;
296 goto fail;
297 }
298
299 printk("vlynq-pci: attaching device %s at %s\n",
300 config->name, dev->dev.bus_id);
301
302 priv = kmalloc(sizeof(struct vlynq_pci_private), GFP_KERNEL);
303 if (!priv) {
304 printk(KERN_ERR "%s: failed to allocate private data\n",
305 dev->dev.bus_id);
306 result = -ENOMEM;
307 goto fail;
308 }
309
310 memset(priv, 0, sizeof(struct vlynq_pci_private));
311 priv->latency = 64;
312 priv->cache_line = 32;
313 priv->config = config;
314
315 mapping[0].offset = ARCH_PFN_OFFSET << PAGE_SHIFT;
316 mapping[0].size = 0x02000000;
317 vlynq_set_local_mapping(dev, dev->mem_start, mapping);
318 vlynq_set_remote_mapping(dev, 0, config->rx_mapping);
319
320 set_irq_type(vlynq_virq_to_irq(dev, config->irq), config->irq_type);
321
322 addr = (u32)ioremap_nocache(dev->mem_start, 0x10000);
323 if (!addr) {
324 printk(KERN_ERR "%s: failed to remap io memory\n",
325 dev->dev.bus_id);
326 result = -ENXIO;
327 goto fail;
328 }
329
330 for (i = 0; i < config->num_regs; i++)
331 *(volatile u32 *)(addr + config->regs[i].offset) =
332 config->regs[i].value;
333
334 dev->priv = priv;
335 for (i = 0; i < VLYNQ_PCI_SLOTS; i++) {
336 if (!slots[i]) {
337 slots[i] = dev;
338 break;
339 }
340 }
341
342 return 0;
343
344 fail:
345 vlynq_device_disable(dev);
346
347 return result;
348 }
349
350 static int vlynq_pci_remove(struct vlynq_device *dev)
351 {
352 int i;
353 struct vlynq_pci_private *priv = dev->priv;
354
355 for (i = 0; i < VLYNQ_PCI_SLOTS; i++)
356 if (slots[i] == dev)
357 slots[i] = NULL;
358
359 vlynq_device_disable(dev);
360 kfree(priv);
361
362 return 0;
363 }
364
365 static struct vlynq_driver vlynq_pci = {
366 .name = "PCI over VLYNQ emulation",
367 .probe = vlynq_pci_probe,
368 .remove = vlynq_pci_remove,
369 };
370
371 int vlynq_pci_init(void)
372 {
373 int res;
374 res = vlynq_register_driver(&vlynq_pci);
375 if (res)
376 return res;
377
378 register_pci_controller(&vlynq_controller);
379
380 return 0;
381 }
382
383 int pcibios_map_irq(struct pci_dev *pdev, u8 slot, u8 pin)
384 {
385 struct vlynq_device *dev;
386 struct vlynq_pci_private *priv;
387
388 dev = slots[slot];
389
390 if (!dev)
391 return 0;
392
393 priv = dev->priv;
394
395 return vlynq_virq_to_irq(dev, priv->config->irq);
396 }
397
398 /* Do platform specific device initialization at pci_enable_device() time */
399 int pcibios_plat_dev_init(struct pci_dev *dev)
400 {
401 return 0;
402 }
This page took 0.072272 seconds and 5 git commands to generate.