package/base-files/brcm-2.6/etc/init.d/netconfig

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2006 OpenWrt.org
   3
   4 START=05
   5
   6 start() {
   7         [ -e /etc/config/network ] && exit 0
   8
   9         mkdir -p /etc/config
  10
  11         (
  12                 if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
  13                         # WGT634u
  14                         echo boardtype=wgt634u
  15                 else
  16                         strings /dev/mtdblock/3
  17                 fi
  18         ) | awk '
  19         function p(cfgname, name) {
  20                 if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
  21         }
  22
  23         BEGIN {
  24                 FS="="
  25                 c["lan_ifname"]="eth0.0"
  26                 c["wan_ifname"]="eth0.1"
  27                 c["vlan0ports"]="1 2 3 4 5*"
  28                 c["vlan1ports"]="0 5"
  29         }
  30
  31         ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
  32                 nvram[$1] = $2
  33         }
  34
  35         END {
  36                 # v1 hardware
  37                 if (nvram["boardtype"] == "bcm94710dev") {
  38                         # Asus WL-500g
  39                         if (nvram["boardnum"] == "asusX") {
  40                                 c["lan_ifname"]="eth0 eth1" # FIXME
  41                                 c["wan_ifname"]=""
  42                         }
  43                 }
  44                 if (nvram["boardtype"] == "bcm94710r4") {
  45                         # Toshiba WRC-1000
  46                         c["lan_ifname"] = "eth0"
  47                         c["wan_ifname"] = "eth1"
  48                 }
  49                 if (nvram["boardtype"] == "wgt634u") {
  50                         c["vlan0ports"] = "0 1 2 3 5*"
  51                         c["vlan1ports"] = "4 5"
  52                 }
  53                 if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
  54                         if (nvram["boardnum"] == "45") {
  55                                 c["vlan0ports"] = "1 2 3 4 5*"
  56                                 c["vlan1ports"] = "0 5"
  57                         } else {
  58                                 c["vlan0ports"] = "0 1 2 3 5*"
  59                                 c["vlan1ports"] = "4 5"
  60                         }
  61                 }
  62
  63                 # WAP54G
  64                 if ((nvram["boardnum"] == "2") || \
  65                         (nvram["boardnum"] == "1024")) {
  66                         c["lan_ifname"]="eth0"
  67                         c["wan_ifname"]=""
  68                 }
  69
  70                 print "#### VLAN configuration "
  71                 print "config switch eth0"
  72                 p("vlan0", "vlan0ports")
  73                 p("vlan1", "vlan1ports")
  74                 print ""
  75                 print ""
  76                 print "#### Loopback configuration"
  77                 print "config interface loopback"
  78                 print " option ifname   \"lo\""
  79                 print " option proto    static"
  80                 print " option ipaddr   127.0.0.1"
  81                 print " option netmask  255.0.0.0"
  82                 print ""
  83                 print ""
  84                 print "#### LAN configuration"
  85                 print "config interface lan"
  86                 print " option type     bridge"
  87                 p("ifname", "lan_ifname")
  88                 print " option proto    static"
  89                 print " option ipaddr   192.168.1.1"
  90                 print " option netmask  255.255.255.0"
  91                 print ""
  92                 print ""
  93                 print "#### WAN configuration"
  94                 print "config interface wan"
  95                 p("ifname", "wan_ifname")
  96                 print " option proto    dhcp"
  97         }' > /etc/config/network
  98 }