projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
ar71xx: create TL-WA901ND network config from uci-defaults
[openwrt.git] / target / linux / generic / patches-2.6.30 / 941-ssb_update.patch
1 --- a/drivers/ssb/Kconfig
2 +++ b/drivers/ssb/Kconfig
3 @@ -66,6 +66,20 @@ config SSB_PCMCIAHOST
4
5 If unsure, say N
6
7 +config SSB_SDIOHOST_POSSIBLE
8 + bool
9 + depends on SSB && (MMC = y || MMC = SSB)
10 + default y
11 +
12 +config SSB_SDIOHOST
13 + bool "Support for SSB on SDIO-bus host"
14 + depends on SSB_SDIOHOST_POSSIBLE
15 + help
16 + Support for a Sonics Silicon Backplane on top
17 + of a SDIO device.
18 +
19 + If unsure, say N
20 +
21 config SSB_SILENT
22 bool "No SSB kernel messages"
23 depends on SSB && EMBEDDED
24 --- a/drivers/ssb/Makefile
25 +++ b/drivers/ssb/Makefile
26 @@ -6,6 +6,7 @@ ssb-$(CONFIG_SSB_SPROM) += sprom.o
27 # host support
28 ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
29 ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o
30 +ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
31
32 # built-in drivers
33 ssb-y += driver_chipcommon.o
34 --- a/drivers/ssb/b43_pci_bridge.c
35 +++ b/drivers/ssb/b43_pci_bridge.c
36 @@ -24,6 +24,7 @@ static const struct pci_device_id b43_pc
37 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
38 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
39 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
40 + { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) },
41 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
42 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
43 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
44 --- a/drivers/ssb/driver_chipcommon.c
45 +++ b/drivers/ssb/driver_chipcommon.c
46 @@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb
47 if (!ccdev)
48 return;
49 bus = ccdev->bus;
50 +
51 + /* We support SLOW only on 6..9 */
52 + if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW)
53 + mode = SSB_CLKMODE_DYNAMIC;
54 +
55 + if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
56 + return; /* PMU controls clockmode, separated function needed */
57 + SSB_WARN_ON(ccdev->id.revision >= 20);
58 +
59 /* chipcommon cores prior to rev6 don't support dynamic clock control */
60 if (ccdev->id.revision < 6)
61 return;
62 - /* chipcommon cores rev10 are a whole new ball game */
63 +
64 + /* ChipCommon cores rev10+ need testing */
65 if (ccdev->id.revision >= 10)
66 return;
67 +
68 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
69 return;
70
71 switch (mode) {
72 - case SSB_CLKMODE_SLOW:
73 + case SSB_CLKMODE_SLOW: /* For revs 6..9 only */
74 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
75 tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
76 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
77 break;
78 case SSB_CLKMODE_FAST:
79 - ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
80 - tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
81 - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
82 - tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
83 - chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
84 + if (ccdev->id.revision < 10) {
85 + ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
86 + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
87 + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
88 + tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
89 + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
90 + } else {
91 + chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
92 + (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) |
93 + SSB_CHIPCO_SYSCLKCTL_FORCEHT));
94 + /* udelay(150); TODO: not available in early init */
95 + }
96 break;
97 case SSB_CLKMODE_DYNAMIC:
98 - tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
99 - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
100 - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
101 - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
102 - if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
103 - tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
104 - chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
105 -
106 - /* for dynamic control, we have to release our xtal_pu "force on" */
107 - if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
108 - ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
109 + if (ccdev->id.revision < 10) {
110 + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
111 + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
112 + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
113 + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
114 + if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) !=
115 + SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
116 + tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
117 + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
118 +
119 + /* For dynamic control, we have to release our xtal_pu
120 + * "force on" */
121 + if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
122 + ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
123 + } else {
124 + chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
125 + (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
126 + ~SSB_CHIPCO_SYSCLKCTL_FORCEHT));
127 + }
128 break;
129 default:
130 SSB_WARN_ON(1);
131 @@ -209,6 +235,24 @@ static void chipco_powercontrol_init(str
132 }
133 }
134
135 +/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
136 +static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
137 +{
138 + struct ssb_bus *bus = cc->dev->bus;
139 +
140 + switch (bus->chip_id) {
141 + case 0x4312:
142 + case 0x4322:
143 + case 0x4328:
144 + return 7000;
145 + case 0x4325:
146 + /* TODO: */
147 + default:
148 + return 15000;
149 + }
150 +}
151 +
152 +/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
153 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
154 {
155 struct ssb_bus *bus = cc->dev->bus;
156 @@ -218,6 +262,12 @@ static void calc_fast_powerup_delay(stru
157
158 if (bus->bustype != SSB_BUSTYPE_PCI)
159 return;
160 +
161 + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
162 + cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
163 + return;
164 + }
165 +
166 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
167 return;
168
169 @@ -233,6 +283,15 @@ void ssb_chipcommon_init(struct ssb_chip
170 {
171 if (!cc->dev)
172 return; /* We don't have a ChipCommon */
173 + if (cc->dev->id.revision >= 11)
174 + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
175 + ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
176 +
177 + if (cc->dev->id.revision >= 20) {
178 + chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
179 + chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
180 + }
181 +
182 ssb_pmu_init(cc);
183 chipco_powercontrol_init(cc);
184 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
185 @@ -370,6 +429,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
186 {
187 return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
188 }
189 +EXPORT_SYMBOL(ssb_chipco_gpio_control);
190
191 u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
192 {
193 --- a/drivers/ssb/driver_chipcommon_pmu.c
194 +++ b/drivers/ssb/driver_chipcommon_pmu.c
195 @@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
196 chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
197 }
198
199 +static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
200 + u32 offset, u32 mask, u32 set)
201 +{
202 + u32 value;
203 +
204 + chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
205 + chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
206 + chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
207 + value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
208 + value &= mask;
209 + value |= set;
210 + chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
211 + chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
212 +}
213 +
214 struct pmu0_plltab_entry {
215 u16 freq; /* Crystal frequency in kHz.*/
216 u8 xf; /* Crystal frequency value for PMU control */
217 @@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
218 case 0x5354:
219 ssb_pmu0_pllinit_r0(cc, crystalfreq);
220 break;
221 + case 0x4322:
222 + if (cc->pmu.rev == 2) {
223 + chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A);
224 + chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
225 + }
226 + break;
227 default:
228 ssb_printk(KERN_ERR PFX
229 "ERROR: PLL init unknown for device %04X\n",
230 @@ -396,12 +417,15 @@ static void ssb_pmu_resources_init(struc
231 u32 min_msk = 0, max_msk = 0;
232 unsigned int i;
233 const struct pmu_res_updown_tab_entry *updown_tab = NULL;
234 - unsigned int updown_tab_size;
235 + unsigned int updown_tab_size = 0;
236 const struct pmu_res_depend_tab_entry *depend_tab = NULL;
237 - unsigned int depend_tab_size;
238 + unsigned int depend_tab_size = 0;
239
240 switch (bus->chip_id) {
241 case 0x4312:
242 + min_msk = 0xCBB;
243 + break;
244 + case 0x4322:
245 /* We keep the default settings:
246 * min_msk = 0xCBB
247 * max_msk = 0x7FFFF
248 @@ -480,9 +504,9 @@ static void ssb_pmu_resources_init(struc
249 chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
250 }
251
252 +/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
253 void ssb_pmu_init(struct ssb_chipcommon *cc)
254 {
255 - struct ssb_bus *bus = cc->dev->bus;
256 u32 pmucap;
257
258 if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
259 @@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon
260 ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
261 cc->pmu.rev, pmucap);
262
263 - if (cc->pmu.rev >= 1) {
264 - if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
265 - chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
266 - ~SSB_CHIPCO_PMU_CTL_NOILPONW);
267 - } else {
268 - chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
269 - SSB_CHIPCO_PMU_CTL_NOILPONW);
270 - }
271 - }
272 + if (cc->pmu.rev == 1)
273 + chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
274 + ~SSB_CHIPCO_PMU_CTL_NOILPONW);
275 + else
276 + chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
277 + SSB_CHIPCO_PMU_CTL_NOILPONW);
278 ssb_pmu_pll_init(cc);
279 ssb_pmu_resources_init(cc);
280 }
281 +
282 +void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
283 + enum ssb_pmu_ldo_volt_id id, u32 voltage)
284 +{
285 + struct ssb_bus *bus = cc->dev->bus;
286 + u32 addr, shift, mask;
287 +
288 + switch (bus->chip_id) {
289 + case 0x4328:
290 + case 0x5354:
291 + switch (id) {
292 + case LDO_VOLT1:
293 + addr = 2;
294 + shift = 25;
295 + mask = 0xF;
296 + break;
297 + case LDO_VOLT2:
298 + addr = 3;
299 + shift = 1;
300 + mask = 0xF;
301 + break;
302 + case LDO_VOLT3:
303 + addr = 3;
304 + shift = 9;
305 + mask = 0xF;
306 + break;
307 + case LDO_PAREF:
308 + addr = 3;
309 + shift = 17;
310 + mask = 0x3F;
311 + break;
312 + default:
313 + SSB_WARN_ON(1);
314 + return;
315 + }
316 + break;
317 + case 0x4312:
318 + if (SSB_WARN_ON(id != LDO_PAREF))
319 + return;
320 + addr = 0;
321 + shift = 21;
322 + mask = 0x3F;
323 + break;
324 + default:
325 + return;
326 + }
327 +
328 + ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
329 + (voltage & mask) << shift);
330 +}
331 +
332 +void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
333 +{
334 + struct ssb_bus *bus = cc->dev->bus;
335 + int ldo;
336 +
337 + switch (bus->chip_id) {
338 + case 0x4312:
339 + ldo = SSB_PMURES_4312_PA_REF_LDO;
340 + break;
341 + case 0x4328:
342 + ldo = SSB_PMURES_4328_PA_REF_LDO;
343 + break;
344 + case 0x5354:
345 + ldo = SSB_PMURES_5354_PA_REF_LDO;
346 + break;
347 + default:
348 + return;
349 + }
350 +
351 + if (on)
352 + chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
353 + else
354 + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
355 + chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
356 +}
357 +
358 +EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
359 +EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
360 --- a/drivers/ssb/driver_gige.c
361 +++ b/drivers/ssb/driver_gige.c
362 @@ -12,6 +12,7 @@
363 #include <linux/ssb/ssb_driver_gige.h>
364 #include <linux/pci.h>
365 #include <linux/pci_regs.h>
366 +#include <linux/slab.h>
367
368
369 /*
370 @@ -105,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige
371 gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
372 }
373
374 -static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
375 - int reg, int size, u32 *val)
376 +static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus,
377 + unsigned int devfn, int reg,
378 + int size, u32 *val)
379 {
380 struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
381 unsigned long flags;
382 @@ -135,8 +137,9 @@ static int ssb_gige_pci_read_config(stru
383 return PCIBIOS_SUCCESSFUL;
384 }
385
386 -static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
387 - int reg, int size, u32 val)
388 +static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus,
389 + unsigned int devfn, int reg,
390 + int size, u32 val)
391 {
392 struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
393 unsigned long flags;
394 @@ -165,7 +168,8 @@ static int ssb_gige_pci_write_config(str
395 return PCIBIOS_SUCCESSFUL;
396 }
397
398 -static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
399 +static int __devinit ssb_gige_probe(struct ssb_device *sdev,
400 + const struct ssb_device_id *id)
401 {
402 struct ssb_gige *dev;
403 u32 base, tmslow, tmshigh;
404 --- a/drivers/ssb/driver_mipscore.c
405 +++ b/drivers/ssb/driver_mipscore.c
406 @@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = {
407
408 static inline u32 ssb_irqflag(struct ssb_device *dev)
409 {
410 - return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
411 + u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
412 + if (tpsflag)
413 + return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
414 + else
415 + /* not irq supported */
416 + return 0x3f;
417 +}
418 +
419 +static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
420 +{
421 + struct ssb_bus *bus = rdev->bus;
422 + int i;
423 + for (i = 0; i < bus->nr_devices; i++) {
424 + struct ssb_device *dev;
425 + dev = &(bus->devices[i]);
426 + if (ssb_irqflag(dev) == irqflag)
427 + return dev;
428 + }
429 + return NULL;
430 }
431
432 /* Get the MIPS IRQ assignment for a specified device.
433 * If unassigned, 0 is returned.
434 + * If disabled, 5 is returned.
435 + * If not supported, 6 is returned.
436 */
437 unsigned int ssb_mips_irq(struct ssb_device *dev)
438 {
439 struct ssb_bus *bus = dev->bus;
440 + struct ssb_device *mdev = bus->mipscore.dev;
441 u32 irqflag;
442 u32 ipsflag;
443 u32 tmp;
444 unsigned int irq;
445
446 irqflag = ssb_irqflag(dev);
447 + if (irqflag == 0x3f)
448 + return 6;
449 ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
450 for (irq = 1; irq <= 4; irq++) {
451 tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
452 if (tmp == irqflag)
453 break;
454 }
455 - if (irq == 5)
456 - irq = 0;
457 + if (irq == 5) {
458 + if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
459 + irq = 0;
460 + }
461
462 return irq;
463 }
464 @@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *d
465 struct ssb_device *mdev = bus->mipscore.dev;
466 u32 irqflag = ssb_irqflag(dev);
467
468 + BUG_ON(oldirq == 6);
469 +
470 dev->irq = irq + 2;
471
472 - ssb_dprintk(KERN_INFO PFX
473 - "set_irq: core 0x%04x, irq %d => %d\n",
474 - dev->id.coreid, oldirq, irq);
475 /* clear the old irq */
476 if (oldirq == 0)
477 ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
478 - else
479 + else if (oldirq != 5)
480 clear_irq(bus, oldirq);
481
482 /* assign the new one */
483 if (irq == 0) {
484 ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
485 } else {
486 + u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
487 + if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
488 + u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
489 + struct ssb_device *olddev = find_device(dev, oldipsflag);
490 + if (olddev)
491 + set_irq(olddev, 0);
492 + }
493 irqflag <<= ipsflag_irq_shift[irq];
494 - irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
495 + irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
496 ssb_write32(mdev, SSB_IPSFLAG, irqflag);
497 }
498 + ssb_dprintk(KERN_INFO PFX
499 + "set_irq: core 0x%04x, irq %d => %d\n",
500 + dev->id.coreid, oldirq+2, irq+2);
501 +}
502 +
503 +static void print_irq(struct ssb_device *dev, unsigned int irq)
504 +{
505 + int i;
506 + static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
507 + ssb_dprintk(KERN_INFO PFX
508 + "core 0x%04x, irq :", dev->id.coreid);
509 + for (i = 0; i <= 6; i++) {
510 + ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
511 + }
512 + ssb_dprintk("\n");
513 +}
514 +
515 +static void dump_irq(struct ssb_bus *bus)
516 +{
517 + int i;
518 + for (i = 0; i < bus->nr_devices; i++) {
519 + struct ssb_device *dev;
520 + dev = &(bus->devices[i]);
521 + print_irq(dev, ssb_mips_irq(dev));
522 + }
523 }
524
525 static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
526 @@ -197,17 +253,23 @@ void ssb_mipscore_init(struct ssb_mipsco
527
528 /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
529 for (irq = 2, i = 0; i < bus->nr_devices; i++) {
530 + int mips_irq;
531 dev = &(bus->devices[i]);
532 - dev->irq = ssb_mips_irq(dev) + 2;
533 + mips_irq = ssb_mips_irq(dev);
534 + if (mips_irq > 4)
535 + dev->irq = 0;
536 + else
537 + dev->irq = mips_irq + 2;
538 + if (dev->irq > 5)
539 + continue;
540 switch (dev->id.coreid) {
541 case SSB_DEV_USB11_HOST:
542 /* shouldn't need a separate irq line for non-4710, most of them have a proper
543 * external usb controller on the pci */
544 if ((bus->chip_id == 0x4710) && (irq <= 4)) {
545 set_irq(dev, irq++);
546 - break;
547 }
548 - /* fallthrough */
549 + break;
550 case SSB_DEV_PCI:
551 case SSB_DEV_ETHERNET:
552 case SSB_DEV_ETHERNET_GBIT:
553 @@ -218,8 +280,14 @@ void ssb_mipscore_init(struct ssb_mipsco
554 set_irq(dev, irq++);
555 break;
556 }
557 + /* fallthrough */
558 + case SSB_DEV_EXTIF:
559 + set_irq(dev, 0);
560 + break;
561 }
562 }
563 + ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
564 + dump_irq(bus);
565
566 ssb_mips_serial_init(mcore);
567 ssb_mips_flash_detect(mcore);
568 --- a/drivers/ssb/driver_pcicore.c
569 +++ b/drivers/ssb/driver_pcicore.c
570 @@ -15,6 +15,11 @@
571
572 #include "ssb_private.h"
573
574 +static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
575 +static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
576 +static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
577 +static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
578 + u8 address, u16 data);
579
580 static inline
581 u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
582 @@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore
583 .pci_ops = &ssb_pcicore_pciops,
584 .io_resource = &ssb_pcicore_io_resource,
585 .mem_resource = &ssb_pcicore_mem_resource,
586 - .mem_offset = 0x24000000,
587 };
588
589 -static u32 ssb_pcicore_pcibus_iobase = 0x100;
590 -static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
591 -
592 /* This function is called when doing a pci_enable_device().
593 * We must first check if the device is a device on the PCI-core bridge. */
594 int ssb_pcicore_plat_dev_init(struct pci_dev *d)
595 {
596 - struct resource *res;
597 - int pos, size;
598 - u32 *base;
599 -
600 if (d->bus->ops != &ssb_pcicore_pciops) {
601 /* This is not a device on the PCI-core bridge. */
602 return -ENODEV;
603 @@ -268,27 +265,6 @@ int ssb_pcicore_plat_dev_init(struct pci
604 ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
605 pci_name(d));
606
607 - /* Fix up resource bases */
608 - for (pos = 0; pos < 6; pos++) {
609 - res = &d->resource[pos];
610 - if (res->flags & IORESOURCE_IO)
611 - base = &ssb_pcicore_pcibus_iobase;
612 - else
613 - base = &ssb_pcicore_pcibus_membase;
614 - res->flags |= IORESOURCE_PCI_FIXED;
615 - if (res->end) {
616 - size = res->end - res->start + 1;
617 - if (*base & (size - 1))
618 - *base = (*base + size) & ~(size - 1);
619 - res->start = *base;
620 - res->end = res->start + size - 1;
621 - *base += size;
622 - pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
623 - }
624 - /* Fix up PCI bridge BAR0 only */
625 - if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
626 - break;
627 - }
628 /* Fix up interrupt lines */
629 d->irq = ssb_mips_irq(extpci_core->dev) + 2;
630 pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
631 @@ -338,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st
632 return ssb_mips_irq(extpci_core->dev) + 2;
633 }
634
635 -static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
636 +static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
637 {
638 u32 val;
639
640 @@ -403,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st
641 register_pci_controller(&ssb_pcicore_controller);
642 }
643
644 -static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
645 +static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc)
646 {
647 struct ssb_bus *bus = pc->dev->bus;
648 u16 chipid_top;
649 @@ -432,25 +408,133 @@ static int pcicore_is_in_hostmode(struct
650 }
651 #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
652
653 +/**************************************************
654 + * Workarounds.
655 + **************************************************/
656 +
657 +static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
658 +{
659 + u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
660 + if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
661 + tmp &= ~0xF000;
662 + tmp |= (pc->dev->core_index << 12);
663 + pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
664 + }
665 +}
666 +
667 +static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
668 +{
669 + return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
670 +}
671 +
672 +static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc)
673 +{
674 + const u8 serdes_pll_device = 0x1D;
675 + const u8 serdes_rx_device = 0x1F;
676 + u16 tmp;
677 +
678 + ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
679 + ssb_pcicore_polarity_workaround(pc));
680 + tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
681 + if (tmp & 0x4000)
682 + ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
683 +}
684 +
685 +static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
686 +{
687 + struct ssb_device *pdev = pc->dev;
688 + struct ssb_bus *bus = pdev->bus;
689 + u32 tmp;
690 +
691 + tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
692 + tmp |= SSB_PCICORE_SBTOPCI_PREF;
693 + tmp |= SSB_PCICORE_SBTOPCI_BURST;
694 + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
695 +
696 + if (pdev->id.revision < 5) {
697 + tmp = ssb_read32(pdev, SSB_IMCFGLO);
698 + tmp &= ~SSB_IMCFGLO_SERTO;
699 + tmp |= 2;
700 + tmp &= ~SSB_IMCFGLO_REQTO;
701 + tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
702 + ssb_write32(pdev, SSB_IMCFGLO, tmp);
703 + ssb_commit_settings(bus);
704 + } else if (pdev->id.revision >= 11) {
705 + tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
706 + tmp |= SSB_PCICORE_SBTOPCI_MRM;
707 + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
708 + }
709 +}
710 +
711 +static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
712 +{
713 + u32 tmp;
714 + u8 rev = pc->dev->id.revision;
715 +
716 + if (rev == 0 || rev == 1) {
717 + /* TLP Workaround register. */
718 + tmp = ssb_pcie_read(pc, 0x4);
719 + tmp |= 0x8;
720 + ssb_pcie_write(pc, 0x4, tmp);
721 + }
722 + if (rev == 1) {
723 + /* DLLP Link Control register. */
724 + tmp = ssb_pcie_read(pc, 0x100);
725 + tmp |= 0x40;
726 + ssb_pcie_write(pc, 0x100, tmp);
727 + }
728 +
729 + if (rev == 0) {
730 + const u8 serdes_rx_device = 0x1F;
731 +
732 + ssb_pcie_mdio_write(pc, serdes_rx_device,
733 + 2 /* Timer */, 0x8128);
734 + ssb_pcie_mdio_write(pc, serdes_rx_device,
735 + 6 /* CDR */, 0x0100);
736 + ssb_pcie_mdio_write(pc, serdes_rx_device,
737 + 7 /* CDR BW */, 0x1466);
738 + } else if (rev == 3 || rev == 4 || rev == 5) {
739 + /* TODO: DLLP Power Management Threshold */
740 + ssb_pcicore_serdes_workaround(pc);
741 + /* TODO: ASPM */
742 + } else if (rev == 7) {
743 + /* TODO: No PLL down */
744 + }
745 +
746 + if (rev >= 6) {
747 + /* Miscellaneous Configuration Fixup */
748 + tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
749 + if (!(tmp & 0x8000))
750 + pcicore_write16(pc, SSB_PCICORE_SPROM(5),
751 + tmp | 0x8000);
752 + }
753 +}
754
755 /**************************************************
756 * Generic and Clientmode operation code.
757 **************************************************/
758
759 -static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
760 +static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
761 {
762 + ssb_pcicore_fix_sprom_core_index(pc);
763 +
764 /* Disable PCI interrupts. */
765 ssb_write32(pc->dev, SSB_INTVEC, 0);
766 +
767 + /* Additional PCIe always once-executed workarounds */
768 + if (pc->dev->id.coreid == SSB_DEV_PCIE) {
769 + ssb_pcicore_serdes_workaround(pc);
770 + /* TODO: ASPM */
771 + /* TODO: Clock Request Update */
772 + }
773 }
774
775 -void ssb_pcicore_init(struct ssb_pcicore *pc)
776 +void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
777 {
778 struct ssb_device *dev = pc->dev;
779 - struct ssb_bus *bus;
780
781 if (!dev)
782 return;
783 - bus = dev->bus;
784 if (!ssb_device_is_enabled(dev))
785 ssb_device_enable(dev, 0);
786
787 @@ -475,58 +559,104 @@ static void ssb_pcie_write(struct ssb_pc
788 pcicore_write32(pc, 0x134, data);
789 }
790
791 -static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
792 - u8 address, u16 data)
793 +static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy)
794 {
795 const u16 mdio_control = 0x128;
796 const u16 mdio_data = 0x12C;
797 u32 v;
798 int i;
799
800 + v = (1 << 30); /* Start of Transaction */
801 + v |= (1 << 28); /* Write Transaction */
802 + v |= (1 << 17); /* Turnaround */
803 + v |= (0x1F << 18);
804 + v |= (phy << 4);
805 + pcicore_write32(pc, mdio_data, v);
806 +
807 + udelay(10);
808 + for (i = 0; i < 200; i++) {
809 + v = pcicore_read32(pc, mdio_control);
810 + if (v & 0x100 /* Trans complete */)
811 + break;
812 + msleep(1);
813 + }
814 +}
815 +
816 +static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address)
817 +{
818 + const u16 mdio_control = 0x128;
819 + const u16 mdio_data = 0x12C;
820 + int max_retries = 10;
821 + u16 ret = 0;
822 + u32 v;
823 + int i;
824 +
825 v = 0x80; /* Enable Preamble Sequence */
826 v |= 0x2; /* MDIO Clock Divisor */
827 pcicore_write32(pc, mdio_control, v);
828
829 + if (pc->dev->id.revision >= 10) {
830 + max_retries = 200;
831 + ssb_pcie_mdio_set_phy(pc, device);
832 + }
833 +
834 v = (1 << 30); /* Start of Transaction */
835 - v |= (1 << 28); /* Write Transaction */
836 + v |= (1 << 29); /* Read Transaction */
837 v |= (1 << 17); /* Turnaround */
838 - v |= (u32)device << 22;
839 + if (pc->dev->id.revision < 10)
840 + v |= (u32)device << 22;
841 v |= (u32)address << 18;
842 - v |= data;
843 pcicore_write32(pc, mdio_data, v);
844 /* Wait for the device to complete the transaction */
845 udelay(10);
846 - for (i = 0; i < 10; i++) {
847 + for (i = 0; i < max_retries; i++) {
848 v = pcicore_read32(pc, mdio_control);
849 - if (v & 0x100 /* Trans complete */)
850 + if (v & 0x100 /* Trans complete */) {
851 + udelay(10);
852 + ret = pcicore_read32(pc, mdio_data);
853 break;
854 + }
855 msleep(1);
856 }
857 pcicore_write32(pc, mdio_control, 0);
858 + return ret;
859 }
860
861 -static void ssb_broadcast_value(struct ssb_device *dev,
862 - u32 address, u32 data)
863 +static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
864 + u8 address, u16 data)
865 {
866 - /* This is used for both, PCI and ChipCommon core, so be careful. */
867 - BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
868 - BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
869 + const u16 mdio_control = 0x128;
870 + const u16 mdio_data = 0x12C;
871 + int max_retries = 10;
872 + u32 v;
873 + int i;
874
875 - ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
876 - ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
877 - ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
878 - ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
879 -}
880 + v = 0x80; /* Enable Preamble Sequence */
881 + v |= 0x2; /* MDIO Clock Divisor */
882 + pcicore_write32(pc, mdio_control, v);
883
884 -static void ssb_commit_settings(struct ssb_bus *bus)
885 -{
886 - struct ssb_device *dev;
887 + if (pc->dev->id.revision >= 10) {
888 + max_retries = 200;
889 + ssb_pcie_mdio_set_phy(pc, device);
890 + }
891
892 - dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
893 - if (WARN_ON(!dev))
894 - return;
895 - /* This forces an update of the cached registers. */
896 - ssb_broadcast_value(dev, 0xFD8, 0);
897 + v = (1 << 30); /* Start of Transaction */
898 + v |= (1 << 28); /* Write Transaction */
899 + v |= (1 << 17); /* Turnaround */
900 + if (pc->dev->id.revision < 10)
901 + v |= (u32)device << 22;
902 + v |= (u32)address << 18;
903 + v |= data;
904 + pcicore_write32(pc, mdio_data, v);
905 + /* Wait for the device to complete the transaction */
906 + udelay(10);
907 + for (i = 0; i < max_retries; i++) {
908 + v = pcicore_read32(pc, mdio_control);
909 + if (v & 0x100 /* Trans complete */)
910 + break;
911 + msleep(1);
912 + }
913 + pcicore_write32(pc, mdio_control, 0);
914 }
915
916 int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
917 @@ -551,13 +681,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc
918 might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
919
920 /* Enable interrupts for this device. */
921 - if (bus->host_pci &&
922 - ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
923 + if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
924 u32 coremask;
925
926 /* Calculate the "coremask" for the device. */
927 coremask = (1 << dev->core_index);
928
929 + SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
930 err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
931 if (err)
932 goto out;
933 @@ -579,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc
934 if (pc->setup_done)
935 goto out;
936 if (pdev->id.coreid == SSB_DEV_PCI) {
937 - tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
938 - tmp |= SSB_PCICORE_SBTOPCI_PREF;
939 - tmp |= SSB_PCICORE_SBTOPCI_BURST;
940 - pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
941 -
942 - if (pdev->id.revision < 5) {
943 - tmp = ssb_read32(pdev, SSB_IMCFGLO);
944 - tmp &= ~SSB_IMCFGLO_SERTO;
945 - tmp |= 2;
946 - tmp &= ~SSB_IMCFGLO_REQTO;
947 - tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
948 - ssb_write32(pdev, SSB_IMCFGLO, tmp);
949 - ssb_commit_settings(bus);
950 - } else if (pdev->id.revision >= 11) {
951 - tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
952 - tmp |= SSB_PCICORE_SBTOPCI_MRM;
953 - pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
954 - }
955 + ssb_pcicore_pci_setup_workarounds(pc);
956 } else {
957 WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
958 - //TODO: Better make defines for all these magic PCIE values.
959 - if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
960 - /* TLP Workaround register. */
961 - tmp = ssb_pcie_read(pc, 0x4);
962 - tmp |= 0x8;
963 - ssb_pcie_write(pc, 0x4, tmp);
964 - }
965 - if (pdev->id.revision == 0) {
966 - const u8 serdes_rx_device = 0x1F;
967 -
968 - ssb_pcie_mdio_write(pc, serdes_rx_device,
969 - 2 /* Timer */, 0x8128);
970 - ssb_pcie_mdio_write(pc, serdes_rx_device,
971 - 6 /* CDR */, 0x0100);
972 - ssb_pcie_mdio_write(pc, serdes_rx_device,
973 - 7 /* CDR BW */, 0x1466);
974 - } else if (pdev->id.revision == 1) {
975 - /* DLLP Link Control register. */
976 - tmp = ssb_pcie_read(pc, 0x100);
977 - tmp |= 0x40;
978 - ssb_pcie_write(pc, 0x100, tmp);
979 - }
980 + ssb_pcicore_pcie_setup_workarounds(pc);
981 }
982 pc->setup_done = 1;
983 out:
984 --- a/drivers/ssb/main.c
985 +++ b/drivers/ssb/main.c
986 @@ -17,6 +17,8 @@
987 #include <linux/ssb/ssb_driver_gige.h>
988 #include <linux/dma-mapping.h>
989 #include <linux/pci.h>
990 +#include <linux/mmc/sdio_func.h>
991 +#include <linux/slab.h>
992
993 #include <pcmcia/cs_types.h>
994 #include <pcmcia/cs.h>
995 @@ -88,6 +90,25 @@ found:
996 }
997 #endif /* CONFIG_SSB_PCMCIAHOST */
998
999 +#ifdef CONFIG_SSB_SDIOHOST
1000 +struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
1001 +{
1002 + struct ssb_bus *bus;
1003 +
1004 + ssb_buses_lock();
1005 + list_for_each_entry(bus, &buses, list) {
1006 + if (bus->bustype == SSB_BUSTYPE_SDIO &&
1007 + bus->host_sdio == func)
1008 + goto found;
1009 + }
1010 + bus = NULL;
1011 +found:
1012 + ssb_buses_unlock();
1013 +
1014 + return bus;
1015 +}
1016 +#endif /* CONFIG_SSB_SDIOHOST */
1017 +
1018 int ssb_for_each_bus_call(unsigned long data,
1019 int (*func)(struct ssb_bus *bus, unsigned long data))
1020 {
1021 @@ -120,6 +141,19 @@ static void ssb_device_put(struct ssb_de
1022 put_device(dev->dev);
1023 }
1024
1025 +static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
1026 +{
1027 + if (drv)
1028 + get_driver(&drv->drv);
1029 + return drv;
1030 +}
1031 +
1032 +static inline void ssb_driver_put(struct ssb_driver *drv)
1033 +{
1034 + if (drv)
1035 + put_driver(&drv->drv);
1036 +}
1037 +
1038 static int ssb_device_resume(struct device *dev)
1039 {
1040 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
1041 @@ -190,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
1042 EXPORT_SYMBOL(ssb_bus_suspend);
1043
1044 #ifdef CONFIG_SSB_SPROM
1045 -int ssb_devices_freeze(struct ssb_bus *bus)
1046 +/** ssb_devices_freeze - Freeze all devices on the bus.
1047 + *
1048 + * After freezing no device driver will be handling a device
1049 + * on this bus anymore. ssb_devices_thaw() must be called after
1050 + * a successful freeze to reactivate the devices.
1051 + *
1052 + * @bus: The bus.
1053 + * @ctx: Context structure. Pass this to ssb_devices_thaw().
1054 + */
1055 +int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
1056 {
1057 - struct ssb_device *dev;
1058 - struct ssb_driver *drv;
1059 - int err = 0;
1060 - int i;
1061 - pm_message_t state = PMSG_FREEZE;
1062 + struct ssb_device *sdev;
1063 + struct ssb_driver *sdrv;
1064 + unsigned int i;
1065 +
1066 + memset(ctx, 0, sizeof(*ctx));
1067 + ctx->bus = bus;
1068 + SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
1069
1070 - /* First check that we are capable to freeze all devices. */
1071 for (i = 0; i < bus->nr_devices; i++) {
1072 - dev = &(bus->devices[i]);
1073 - if (!dev->dev ||
1074 - !dev->dev->driver ||
1075 - !device_is_registered(dev->dev))
1076 - continue;
1077 - drv = drv_to_ssb_drv(dev->dev->driver);
1078 - if (!drv)
1079 + sdev = ssb_device_get(&bus->devices[i]);
1080 +
1081 + if (!sdev->dev || !sdev->dev->driver ||
1082 + !device_is_registered(sdev->dev)) {
1083 + ssb_device_put(sdev);
1084 continue;
1085 - if (!drv->suspend) {
1086 - /* Nope, can't suspend this one. */
1087 - return -EOPNOTSUPP;
1088 }
1089 - }
1090 - /* Now suspend all devices */
1091 - for (i = 0; i < bus->nr_devices; i++) {
1092 - dev = &(bus->devices[i]);
1093 - if (!dev->dev ||
1094 - !dev->dev->driver ||
1095 - !device_is_registered(dev->dev))
1096 - continue;
1097 - drv = drv_to_ssb_drv(dev->dev->driver);
1098 - if (!drv)
1099 + sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
1100 + if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
1101 + ssb_device_put(sdev);
1102 continue;
1103 - err = drv->suspend(dev, state);
1104 - if (err) {
1105 - ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
1106 - dev_name(dev->dev));
1107 - goto err_unwind;
1108 }
1109 + sdrv->remove(sdev);
1110 + ctx->device_frozen[i] = 1;
1111 }
1112
1113 return 0;
1114 -err_unwind:
1115 - for (i--; i >= 0; i--) {
1116 - dev = &(bus->devices[i]);
1117 - if (!dev->dev ||
1118 - !dev->dev->driver ||
1119 - !device_is_registered(dev->dev))
1120 - continue;
1121 - drv = drv_to_ssb_drv(dev->dev->driver);
1122 - if (!drv)
1123 - continue;
1124 - if (drv->resume)
1125 - drv->resume(dev);
1126 - }
1127 - return err;
1128 }
1129
1130 -int ssb_devices_thaw(struct ssb_bus *bus)
1131 +/** ssb_devices_thaw - Unfreeze all devices on the bus.
1132 + *
1133 + * This will re-attach the device drivers and re-init the devices.
1134 + *
1135 + * @ctx: The context structure from ssb_devices_freeze()
1136 + */
1137 +int ssb_devices_thaw(struct ssb_freeze_context *ctx)
1138 {
1139 - struct ssb_device *dev;
1140 - struct ssb_driver *drv;
1141 - int err;
1142 - int i;
1143 + struct ssb_bus *bus = ctx->bus;
1144 + struct ssb_device *sdev;
1145 + struct ssb_driver *sdrv;
1146 + unsigned int i;
1147 + int err, result = 0;
1148
1149 for (i = 0; i < bus->nr_devices; i++) {
1150 - dev = &(bus->devices[i]);
1151 - if (!dev->dev ||
1152 - !dev->dev->driver ||
1153 - !device_is_registered(dev->dev))
1154 + if (!ctx->device_frozen[i])
1155 continue;
1156 - drv = drv_to_ssb_drv(dev->dev->driver);
1157 - if (!drv)
1158 + sdev = &bus->devices[i];
1159 +
1160 + if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
1161 continue;
1162 - if (SSB_WARN_ON(!drv->resume))
1163 + sdrv = drv_to_ssb_drv(sdev->dev->driver);
1164 + if (SSB_WARN_ON(!sdrv || !sdrv->probe))
1165 continue;
1166 - err = drv->resume(dev);
1167 +
1168 + err = sdrv->probe(sdev, &sdev->id);
1169 if (err) {
1170 ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
1171 - dev_name(dev->dev));
1172 + dev_name(sdev->dev));
1173 + result = err;
1174 }
1175 + ssb_driver_put(sdrv);
1176 + ssb_device_put(sdev);
1177 }
1178
1179 - return 0;
1180 + return result;
1181 }
1182 #endif /* CONFIG_SSB_SPROM */
1183
1184 @@ -360,6 +385,35 @@ static int ssb_device_uevent(struct devi
1185 ssb_dev->id.revision);
1186 }
1187
1188 +#define ssb_config_attr(attrib, field, format_string) \
1189 +static ssize_t \
1190 +attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
1191 +{ \
1192 + return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
1193 +}
1194 +
1195 +ssb_config_attr(core_num, core_index, "%u\n")
1196 +ssb_config_attr(coreid, id.coreid, "0x%04x\n")
1197 +ssb_config_attr(vendor, id.vendor, "0x%04x\n")
1198 +ssb_config_attr(revision, id.revision, "%u\n")
1199 +ssb_config_attr(irq, irq, "%u\n")
1200 +static ssize_t
1201 +name_show(struct device *dev, struct device_attribute *attr, char *buf)
1202 +{
1203 + return sprintf(buf, "%s\n",
1204 + ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
1205 +}
1206 +
1207 +static struct device_attribute ssb_device_attrs[] = {
1208 + __ATTR_RO(name),
1209 + __ATTR_RO(core_num),
1210 + __ATTR_RO(coreid),
1211 + __ATTR_RO(vendor),
1212 + __ATTR_RO(revision),
1213 + __ATTR_RO(irq),
1214 + __ATTR_NULL,
1215 +};
1216 +
1217 static struct bus_type ssb_bustype = {
1218 .name = "ssb",
1219 .match = ssb_bus_match,
1220 @@ -369,6 +423,7 @@ static struct bus_type ssb_bustype = {
1221 .suspend = ssb_device_suspend,
1222 .resume = ssb_device_resume,
1223 .uevent = ssb_device_uevent,
1224 + .dev_attrs = ssb_device_attrs,
1225 };
1226
1227 static void ssb_buses_lock(void)
1228 @@ -461,6 +516,7 @@ static int ssb_devices_register(struct s
1229 #ifdef CONFIG_SSB_PCIHOST
1230 sdev->irq = bus->host_pci->irq;
1231 dev->parent = &bus->host_pci->dev;
1232 + sdev->dma_dev = dev->parent;
1233 #endif
1234 break;
1235 case SSB_BUSTYPE_PCMCIA:
1236 @@ -469,8 +525,14 @@ static int ssb_devices_register(struct s
1237 dev->parent = &bus->host_pcmcia->dev;
1238 #endif
1239 break;
1240 + case SSB_BUSTYPE_SDIO:
1241 +#ifdef CONFIG_SSB_SDIOHOST
1242 + dev->parent = &bus->host_sdio->dev;
1243 +#endif
1244 + break;
1245 case SSB_BUSTYPE_SSB:
1246 dev->dma_mask = &dev->coherent_dma_mask;
1247 + sdev->dma_dev = dev;
1248 break;
1249 }
1250
1251 @@ -497,7 +559,7 @@ error:
1252 }
1253
1254 /* Needs ssb_buses_lock() */
1255 -static int ssb_attach_queued_buses(void)
1256 +static int __devinit ssb_attach_queued_buses(void)
1257 {
1258 struct ssb_bus *bus, *n;
1259 int err = 0;
1260 @@ -708,9 +770,9 @@ out:
1261 return err;
1262 }
1263
1264 -static int ssb_bus_register(struct ssb_bus *bus,
1265 - ssb_invariants_func_t get_invariants,
1266 - unsigned long baseaddr)
1267 +static int __devinit ssb_bus_register(struct ssb_bus *bus,
1268 + ssb_invariants_func_t get_invariants,
1269 + unsigned long baseaddr)
1270 {
1271 int err;
1272
1273 @@ -724,12 +786,18 @@ static int ssb_bus_register(struct ssb_b
1274 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
1275 if (err)
1276 goto out;
1277 +
1278 + /* Init SDIO-host device (if any), before the scan */
1279 + err = ssb_sdio_init(bus);
1280 + if (err)
1281 + goto err_disable_xtal;
1282 +
1283 ssb_buses_lock();
1284 bus->busnumber = next_busnumber;
1285 /* Scan for devices (cores) */
1286 err = ssb_bus_scan(bus, baseaddr);
1287 if (err)
1288 - goto err_disable_xtal;
1289 + goto err_sdio_exit;
1290
1291 /* Init PCI-host device (if any) */
1292 err = ssb_pci_init(bus);
1293 @@ -776,6 +844,8 @@ err_pci_exit:
1294 ssb_pci_exit(bus);
1295 err_unmap:
1296 ssb_iounmap(bus);
1297 +err_sdio_exit:
1298 + ssb_sdio_exit(bus);
1299 err_disable_xtal:
1300 ssb_buses_unlock();
1301 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
1302 @@ -783,8 +853,8 @@ err_disable_xtal:
1303 }
1304
1305 #ifdef CONFIG_SSB_PCIHOST
1306 -int ssb_bus_pcibus_register(struct ssb_bus *bus,
1307 - struct pci_dev *host_pci)
1308 +int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus,
1309 + struct pci_dev *host_pci)
1310 {
1311 int err;
1312
1313 @@ -796,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b
1314 if (!err) {
1315 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
1316 "PCI device %s\n", dev_name(&host_pci->dev));
1317 + } else {
1318 + ssb_printk(KERN_ERR PFX "Failed to register PCI version"
1319 + " of SSB with error %d\n", err);
1320 }
1321
1322 return err;
1323 @@ -804,9 +877,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
1324 #endif /* CONFIG_SSB_PCIHOST */
1325
1326 #ifdef CONFIG_SSB_PCMCIAHOST
1327 -int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
1328 - struct pcmcia_device *pcmcia_dev,
1329 - unsigned long baseaddr)
1330 +int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus,
1331 + struct pcmcia_device *pcmcia_dev,
1332 + unsigned long baseaddr)
1333 {
1334 int err;
1335
1336 @@ -825,9 +898,32 @@ int ssb_bus_pcmciabus_register(struct ss
1337 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
1338 #endif /* CONFIG_SSB_PCMCIAHOST */
1339
1340 -int ssb_bus_ssbbus_register(struct ssb_bus *bus,
1341 - unsigned long baseaddr,
1342 - ssb_invariants_func_t get_invariants)
1343 +#ifdef CONFIG_SSB_SDIOHOST
1344 +int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus,
1345 + struct sdio_func *func,
1346 + unsigned int quirks)
1347 +{
1348 + int err;
1349 +
1350 + bus->bustype = SSB_BUSTYPE_SDIO;
1351 + bus->host_sdio = func;
1352 + bus->ops = &ssb_sdio_ops;
1353 + bus->quirks = quirks;
1354 +
1355 + err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
1356 + if (!err) {
1357 + ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
1358 + "SDIO device %s\n", sdio_func_id(func));
1359 + }
1360 +
1361 + return err;
1362 +}
1363 +EXPORT_SYMBOL(ssb_bus_sdiobus_register);
1364 +#endif /* CONFIG_SSB_PCMCIAHOST */
1365 +
1366 +int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus,
1367 + unsigned long baseaddr,
1368 + ssb_invariants_func_t get_invariants)
1369 {
1370 int err;
1371
1372 @@ -908,8 +1004,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
1373 switch (plltype) {
1374 case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
1375 if (m & SSB_CHIPCO_CLK_T6_MMASK)
1376 - return SSB_CHIPCO_CLK_T6_M0;
1377 - return SSB_CHIPCO_CLK_T6_M1;
1378 + return SSB_CHIPCO_CLK_T6_M1;
1379 + return SSB_CHIPCO_CLK_T6_M0;
1380 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
1381 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
1382 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
1383 @@ -1024,23 +1120,22 @@ static u32 ssb_tmslow_reject_bitmask(str
1384 {
1385 u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
1386
1387 - /* The REJECT bit changed position in TMSLOW between
1388 - * Backplane revisions. */
1389 + /* The REJECT bit seems to be different for Backplane rev 2.3 */
1390 switch (rev) {
1391 case SSB_IDLOW_SSBREV_22:
1392 - return SSB_TMSLOW_REJECT_22;
1393 + case SSB_IDLOW_SSBREV_24:
1394 + case SSB_IDLOW_SSBREV_26:
1395 + return SSB_TMSLOW_REJECT;
1396 case SSB_IDLOW_SSBREV_23:
1397 return SSB_TMSLOW_REJECT_23;
1398 - case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */
1399 - case SSB_IDLOW_SSBREV_25: /* same here */
1400 - case SSB_IDLOW_SSBREV_26: /* same here */
1401 + case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
1402 case SSB_IDLOW_SSBREV_27: /* same here */
1403 - return SSB_TMSLOW_REJECT_23; /* this is a guess */
1404 + return SSB_TMSLOW_REJECT; /* this is a guess */
1405 default:
1406 printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
1407 WARN_ON(1);
1408 }
1409 - return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
1410 + return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
1411 }
1412
1413 int ssb_device_is_enabled(struct ssb_device *dev)
1414 @@ -1099,10 +1194,10 @@ void ssb_device_enable(struct ssb_device
1415 }
1416 EXPORT_SYMBOL(ssb_device_enable);
1417
1418 -/* Wait for a bit in a register to get set or unset.
1419 +/* Wait for bitmask in a register to get set or cleared.
1420 * timeout is in units of ten-microseconds */
1421 -static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
1422 - int timeout, int set)
1423 +static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
1424 + int timeout, int set)
1425 {
1426 int i;
1427 u32 val;
1428 @@ -1110,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic
1429 for (i = 0; i < timeout; i++) {
1430 val = ssb_read32(dev, reg);
1431 if (set) {
1432 - if (val & bitmask)
1433 + if ((val & bitmask) == bitmask)
1434 return 0;
1435 } else {
1436 if (!(val & bitmask))
1437 @@ -1127,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic
1438
1439 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
1440 {
1441 - u32 reject;
1442 + u32 reject, val;
1443
1444 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
1445 return;
1446
1447 reject = ssb_tmslow_reject_bitmask(dev);
1448 - ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
1449 - ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
1450 - ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
1451 - ssb_write32(dev, SSB_TMSLOW,
1452 - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
1453 - reject | SSB_TMSLOW_RESET |
1454 - core_specific_flags);
1455 - ssb_flush_tmslow(dev);
1456 +
1457 + if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
1458 + ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
1459 + ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
1460 + ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
1461 +
1462 + if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
1463 + val = ssb_read32(dev, SSB_IMSTATE);
1464 + val |= SSB_IMSTATE_REJECT;
1465 + ssb_write32(dev, SSB_IMSTATE, val);
1466 + ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
1467 + 0);
1468 + }
1469 +
1470 + ssb_write32(dev, SSB_TMSLOW,
1471 + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
1472 + reject | SSB_TMSLOW_RESET |
1473 + core_specific_flags);
1474 + ssb_flush_tmslow(dev);
1475 +
1476 + if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
1477 + val = ssb_read32(dev, SSB_IMSTATE);
1478 + val &= ~SSB_IMSTATE_REJECT;
1479 + ssb_write32(dev, SSB_IMSTATE, val);
1480 + }
1481 + }
1482
1483 ssb_write32(dev, SSB_TMSLOW,
1484 reject | SSB_TMSLOW_RESET |
1485 @@ -1155,7 +1268,10 @@ u32 ssb_dma_translation(struct ssb_devic
1486 case SSB_BUSTYPE_SSB:
1487 return 0;
1488 case SSB_BUSTYPE_PCI:
1489 - return SSB_PCI_DMA;
1490 + if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64)
1491 + return SSB_PCIE_DMA_H32;
1492 + else
1493 + return SSB_PCI_DMA;
1494 default:
1495 __ssb_dma_not_implemented(dev);
1496 }
1497 @@ -1272,20 +1388,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
1498
1499 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
1500 {
1501 - struct ssb_chipcommon *cc;
1502 int err;
1503 enum ssb_clkmode mode;
1504
1505 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
1506 if (err)
1507 goto error;
1508 - cc = &bus->chipco;
1509 - mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
1510 - ssb_chipco_set_clockmode(cc, mode);
1511
1512 #ifdef CONFIG_SSB_DEBUG
1513 bus->powered_up = 1;
1514 #endif
1515 +
1516 + mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
1517 + ssb_chipco_set_clockmode(&bus->chipco, mode);
1518 +
1519 return 0;
1520 error:
1521 ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
1522 @@ -1293,6 +1409,37 @@ error:
1523 }
1524 EXPORT_SYMBOL(ssb_bus_powerup);
1525
1526 +static void ssb_broadcast_value(struct ssb_device *dev,
1527 + u32 address, u32 data)
1528 +{
1529 +#ifdef CONFIG_SSB_DRIVER_PCICORE
1530 + /* This is used for both, PCI and ChipCommon core, so be careful. */
1531 + BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
1532 + BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
1533 +#endif
1534 +
1535 + ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
1536 + ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
1537 + ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
1538 + ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
1539 +}
1540 +
1541 +void ssb_commit_settings(struct ssb_bus *bus)
1542 +{
1543 + struct ssb_device *dev;
1544 +
1545 +#ifdef CONFIG_SSB_DRIVER_PCICORE
1546 + dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
1547 +#else
1548 + dev = bus->chipco.dev;
1549 +#endif
1550 + if (WARN_ON(!dev))
1551 + return;
1552 + /* This forces an update of the cached registers. */
1553 + ssb_broadcast_value(dev, 0xFD8, 0);
1554 +}
1555 +EXPORT_SYMBOL(ssb_commit_settings);
1556 +
1557 u32 ssb_admatch_base(u32 adm)
1558 {
1559 u32 base = 0;
1560 @@ -1358,8 +1505,10 @@ static int __init ssb_modinit(void)
1561 ssb_buses_lock();
1562 err = ssb_attach_queued_buses();
1563 ssb_buses_unlock();
1564 - if (err)
1565 + if (err) {
1566 bus_unregister(&ssb_bustype);
1567 + goto out;
1568 + }
1569
1570 err = b43_pci_ssb_bridge_init();
1571 if (err) {
1572 @@ -1375,7 +1524,7 @@ static int __init ssb_modinit(void)
1573 /* don't fail SSB init because of this */
1574 err = 0;
1575 }
1576 -
1577 +out:
1578 return err;
1579 }
1580 /* ssb must be initialized after PCI but before the ssb drivers.
1581 --- a/drivers/ssb/pci.c
1582 +++ b/drivers/ssb/pci.c
1583 @@ -17,6 +17,7 @@
1584
1585 #include <linux/ssb/ssb.h>
1586 #include <linux/ssb/ssb_regs.h>
1587 +#include <linux/slab.h>
1588 #include <linux/pci.h>
1589 #include <linux/delay.h>
1590
1591 @@ -167,10 +168,16 @@ err_pci:
1592 }
1593
1594 /* Get the word-offset for a SSB_SPROM_XXX define. */
1595 -#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
1596 +#define SPOFF(offset) ((offset) / sizeof(u16))
1597 /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
1598 -#define SPEX(_outvar, _offset, _mask, _shift) \
1599 +#define SPEX16(_outvar, _offset, _mask, _shift) \
1600 out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
1601 +#define SPEX32(_outvar, _offset, _mask, _shift) \
1602 + out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
1603 + in[SPOFF(_offset)]) & (_mask)) >> (_shift))
1604 +#define SPEX(_outvar, _offset, _mask, _shift) \
1605 + SPEX16(_outvar, _offset, _mask, _shift)
1606 +
1607
1608 static inline u8 ssb_crc8(u8 crc, u8 data)
1609 {
1610 @@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
1611 int i;
1612
1613 for (i = 0; i < bus->sprom_size; i++)
1614 - sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
1615 + sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
1616
1617 return 0;
1618 }
1619 @@ -278,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
1620 ssb_printk("75%%");
1621 else if (i % 2)
1622 ssb_printk(".");
1623 - writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
1624 + writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
1625 mmiowb();
1626 msleep(20);
1627 }
1628 @@ -399,6 +406,46 @@ static void sprom_extract_r123(struct ss
1629 out->antenna_gain.ghz5.a3 = gain;
1630 }
1631
1632 +/* Revs 4 5 and 8 have partially shared layout */
1633 +static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
1634 +{
1635 + SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
1636 + SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
1637 + SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
1638 + SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
1639 + SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
1640 + SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
1641 + SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
1642 + SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
1643 +
1644 + SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
1645 + SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
1646 + SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
1647 + SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
1648 + SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
1649 + SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
1650 + SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
1651 + SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
1652 +
1653 + SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
1654 + SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
1655 + SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
1656 + SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
1657 + SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
1658 + SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
1659 + SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
1660 + SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
1661 +
1662 + SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
1663 + SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
1664 + SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
1665 + SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
1666 + SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
1667 + SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
1668 + SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
1669 + SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
1670 +}
1671 +
1672 static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
1673 {
1674 int i;
1675 @@ -421,10 +468,14 @@ static void sprom_extract_r45(struct ssb
1676 SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
1677 SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
1678 SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
1679 + SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
1680 + SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
1681 } else {
1682 SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
1683 SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
1684 SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
1685 + SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
1686 + SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
1687 }
1688 SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
1689 SSB_SPROM4_ANTAVAIL_A_SHIFT);
1690 @@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb
1691 memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
1692 sizeof(out->antenna_gain.ghz5));
1693
1694 + sprom_extract_r458(out, in);
1695 +
1696 /* TODO - get remaining rev 4 stuff needed */
1697 }
1698
1699 @@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_
1700
1701 /* extract the MAC address */
1702 for (i = 0; i < 3; i++) {
1703 - v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
1704 + v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
1705 *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
1706 }
1707 SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
1708 SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
1709 SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
1710 + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
1711 + SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
1712 SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
1713 SSB_SPROM8_ANTAVAIL_A_SHIFT);
1714 SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
1715 @@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_
1716 SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
1717 SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
1718 SSB_SPROM8_ITSSI_A_SHIFT);
1719 + SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
1720 + SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
1721 + SSB_SPROM8_MAXP_AL_SHIFT);
1722 SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
1723 SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
1724 SSB_SPROM8_GPIOA_P1_SHIFT);
1725 SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
1726 SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
1727 SSB_SPROM8_GPIOB_P3_SHIFT);
1728 + SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
1729 + SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
1730 + SSB_SPROM8_TRI5G_SHIFT);
1731 + SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
1732 + SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
1733 + SSB_SPROM8_TRI5GH_SHIFT);
1734 + SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
1735 + SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
1736 + SSB_SPROM8_RXPO5G_SHIFT);
1737 + SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
1738 + SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
1739 + SSB_SPROM8_RSSISMC2G_SHIFT);
1740 + SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
1741 + SSB_SPROM8_RSSISAV2G_SHIFT);
1742 + SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
1743 + SSB_SPROM8_BXA2G_SHIFT);
1744 + SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
1745 + SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
1746 + SSB_SPROM8_RSSISMC5G_SHIFT);
1747 + SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
1748 + SSB_SPROM8_RSSISAV5G_SHIFT);
1749 + SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
1750 + SSB_SPROM8_BXA5G_SHIFT);
1751 + SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
1752 + SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
1753 + SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
1754 + SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
1755 + SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
1756 + SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
1757 + SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
1758 + SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
1759 + SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
1760 + SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
1761 + SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
1762 + SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
1763 + SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
1764 + SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
1765 + SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
1766 + SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
1767 + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
1768
1769 /* Extract the antenna gain values. */
1770 SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
1771 @@ -509,6 +607,8 @@ static void sprom_extract_r8(struct ssb_
1772 memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
1773 sizeof(out->antenna_gain.ghz5));
1774
1775 + sprom_extract_r458(out, in);
1776 +
1777 /* TODO - get remaining rev 8 stuff needed */
1778 }
1779
1780 @@ -521,36 +621,34 @@ static int sprom_extract(struct ssb_bus
1781 ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
1782 memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
1783 memset(out->et1mac, 0xFF, 6);
1784 +
1785 if ((bus->chip_id & 0xFF00) == 0x4400) {
1786 /* Workaround: The BCM44XX chip has a stupid revision
1787 * number stored in the SPROM.
1788 * Always extract r1. */
1789 out->revision = 1;
1790 + ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
1791 + }
1792 +
1793 + switch (out->revision) {
1794 + case 1:
1795 + case 2:
1796 + case 3:
1797 sprom_extract_r123(out, in);
1798 - } else if (bus->chip_id == 0x4321) {
1799 - /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
1800 - out->revision = 4;
1801 + break;
1802 + case 4:
1803 + case 5:
1804 sprom_extract_r45(out, in);
1805 - } else {
1806 - switch (out->revision) {
1807 - case 1:
1808 - case 2:
1809 - case 3:
1810 - sprom_extract_r123(out, in);
1811 - break;
1812 - case 4:
1813 - case 5:
1814 - sprom_extract_r45(out, in);
1815 - break;
1816 - case 8:
1817 - sprom_extract_r8(out, in);
1818 - break;
1819 - default:
1820 - ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
1821 - " revision %d detected. Will extract"
1822 - " v1\n", out->revision);
1823 - sprom_extract_r123(out, in);
1824 - }
1825 + break;
1826 + case 8:
1827 + sprom_extract_r8(out, in);
1828 + break;
1829 + default:
1830 + ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
1831 + " revision %d detected. Will extract"
1832 + " v1\n", out->revision);
1833 + out->revision = 1;
1834 + sprom_extract_r123(out, in);
1835 }
1836
1837 if (out->boardflags_lo == 0xFFFF)
1838 @@ -564,13 +662,34 @@ static int sprom_extract(struct ssb_bus
1839 static int ssb_pci_sprom_get(struct ssb_bus *bus,
1840 struct ssb_sprom *sprom)
1841 {
1842 - const struct ssb_sprom *fallback;
1843 - int err = -ENOMEM;
1844 + int err;
1845 u16 *buf;
1846
1847 + if (!ssb_is_sprom_available(bus)) {
1848 + ssb_printk(KERN_ERR PFX "No SPROM available!\n");
1849 + return -ENODEV;
1850 + }
1851 + if (bus->chipco.dev) { /* can be unavailable! */
1852 + /*
1853 + * get SPROM offset: SSB_SPROM_BASE1 except for
1854 + * chipcommon rev >= 31 or chip ID is 0x4312 and
1855 + * chipcommon status & 3 == 2
1856 + */
1857 + if (bus->chipco.dev->id.revision >= 31)
1858 + bus->sprom_offset = SSB_SPROM_BASE31;
1859 + else if (bus->chip_id == 0x4312 &&
1860 + (bus->chipco.status & 0x03) == 2)
1861 + bus->sprom_offset = SSB_SPROM_BASE31;
1862 + else
1863 + bus->sprom_offset = SSB_SPROM_BASE1;
1864 + } else {
1865 + bus->sprom_offset = SSB_SPROM_BASE1;
1866 + }
1867 + ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
1868 +
1869 buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
1870 if (!buf)
1871 - goto out;
1872 + return -ENOMEM;
1873 bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
1874 sprom_do_read(bus, buf);
1875 err = sprom_check_crc(buf, bus->sprom_size);
1876 @@ -580,17 +699,24 @@ static int ssb_pci_sprom_get(struct ssb_
1877 buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
1878 GFP_KERNEL);
1879 if (!buf)
1880 - goto out;
1881 + return -ENOMEM;
1882 bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
1883 sprom_do_read(bus, buf);
1884 err = sprom_check_crc(buf, bus->sprom_size);
1885 if (err) {
1886 /* All CRC attempts failed.
1887 * Maybe there is no SPROM on the device?
1888 - * If we have a fallback, use that. */
1889 - fallback = ssb_get_fallback_sprom();
1890 - if (fallback) {
1891 - memcpy(sprom, fallback, sizeof(*sprom));
1892 + * Now we ask the arch code if there is some sprom
1893 + * available for this device in some other storage */
1894 + err = ssb_fill_sprom_with_fallback(bus, sprom);
1895 + if (err) {
1896 + ssb_printk(KERN_WARNING PFX "WARNING: Using"
1897 + " fallback SPROM failed (err %d)\n",
1898 + err);
1899 + } else {
1900 + ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
1901 + " revision %d provided by"
1902 + " platform.\n", sprom->revision);
1903 err = 0;
1904 goto out_free;
1905 }
1906 @@ -602,19 +728,15 @@ static int ssb_pci_sprom_get(struct ssb_
1907
1908 out_free:
1909 kfree(buf);
1910 -out:
1911 return err;
1912 }
1913
1914 static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
1915 struct ssb_boardinfo *bi)
1916 {
1917 - pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID,
1918 - &bi->vendor);
1919 - pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID,
1920 - &bi->type);
1921 - pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
1922 - &bi->rev);
1923 + bi->vendor = bus->host_pci->subsystem_vendor;
1924 + bi->type = bus->host_pci->subsystem_device;
1925 + bi->rev = bus->host_pci->revision;
1926 }
1927
1928 int ssb_pci_get_invariants(struct ssb_bus *bus,
1929 --- a/drivers/ssb/pcihost_wrapper.c
1930 +++ b/drivers/ssb/pcihost_wrapper.c
1931 @@ -12,6 +12,7 @@
1932 */
1933
1934 #include <linux/pci.h>
1935 +#include <linux/slab.h>
1936 #include <linux/ssb/ssb.h>
1937
1938
1939 @@ -52,12 +53,13 @@ static int ssb_pcihost_resume(struct pci
1940 # define ssb_pcihost_resume NULL
1941 #endif /* CONFIG_PM */
1942
1943 -static int ssb_pcihost_probe(struct pci_dev *dev,
1944 - const struct pci_device_id *id)
1945 +static int __devinit ssb_pcihost_probe(struct pci_dev *dev,
1946 + const struct pci_device_id *id)
1947 {
1948 struct ssb_bus *ssb;
1949 int err = -ENOMEM;
1950 const char *name;
1951 + u32 val;
1952
1953 ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
1954 if (!ssb)
1955 @@ -73,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_
1956 goto err_pci_disable;
1957 pci_set_master(dev);
1958
1959 + /* Disable the RETRY_TIMEOUT register (0x41) to keep
1960 + * PCI Tx retries from interfering with C3 CPU state */
1961 + pci_read_config_dword(dev, 0x40, &val);
1962 + if ((val & 0x0000ff00) != 0)
1963 + pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
1964 +
1965 err = ssb_bus_pcibus_register(ssb, dev);
1966 if (err)
1967 goto err_pci_release_regions;
1968 @@ -102,7 +110,7 @@ static void ssb_pcihost_remove(struct pc
1969 pci_set_drvdata(dev, NULL);
1970 }
1971
1972 -int ssb_pcihost_register(struct pci_driver *driver)
1973 +int __devinit ssb_pcihost_register(struct pci_driver *driver)
1974 {
1975 driver->probe = ssb_pcihost_probe;
1976 driver->remove = ssb_pcihost_remove;
1977 --- a/drivers/ssb/pcmcia.c
1978 +++ b/drivers/ssb/pcmcia.c
1979 @@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st
1980 ssb_printk(".");
1981 err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
1982 if (err) {
1983 - ssb_printk("\n" KERN_NOTICE PFX
1984 + ssb_printk(KERN_NOTICE PFX
1985 "Failed to write to SPROM.\n");
1986 failed = 1;
1987 break;
1988 @@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st
1989 }
1990 err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
1991 if (err) {
1992 - ssb_printk("\n" KERN_NOTICE PFX
1993 + ssb_printk(KERN_NOTICE PFX
1994 "Could not disable SPROM write access.\n");
1995 failed = 1;
1996 }
1997 @@ -617,134 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
1998 } \
1999 } while (0)
2000
2001 -int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
2002 - struct ssb_init_invariants *iv)
2003 +static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
2004 + tuple_t *tuple,
2005 + void *priv)
2006 {
2007 - tuple_t tuple;
2008 - int res;
2009 - unsigned char buf[32];
2010 + struct ssb_sprom *sprom = priv;
2011 +
2012 + if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
2013 + return -EINVAL;
2014 + if (tuple->TupleDataLen != ETH_ALEN + 2)
2015 + return -EINVAL;
2016 + if (tuple->TupleData[1] != ETH_ALEN)
2017 + return -EINVAL;
2018 + memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
2019 + return 0;
2020 +};
2021 +
2022 +static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
2023 + tuple_t *tuple,
2024 + void *priv)
2025 +{
2026 + struct ssb_init_invariants *iv = priv;
2027 struct ssb_sprom *sprom = &iv->sprom;
2028 struct ssb_boardinfo *bi = &iv->boardinfo;
2029 const char *error_description;
2030
2031 + GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
2032 + switch (tuple->TupleData[0]) {
2033 + case SSB_PCMCIA_CIS_ID:
2034 + GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
2035 + (tuple->TupleDataLen != 7),
2036 + "id tpl size");
2037 + bi->vendor = tuple->TupleData[1] |
2038 + ((u16)tuple->TupleData[2] << 8);
2039 + break;
2040 + case SSB_PCMCIA_CIS_BOARDREV:
2041 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
2042 + "boardrev tpl size");
2043 + sprom->board_rev = tuple->TupleData[1];
2044 + break;
2045 + case SSB_PCMCIA_CIS_PA:
2046 + GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
2047 + (tuple->TupleDataLen != 10),
2048 + "pa tpl size");
2049 + sprom->pa0b0 = tuple->TupleData[1] |
2050 + ((u16)tuple->TupleData[2] << 8);
2051 + sprom->pa0b1 = tuple->TupleData[3] |
2052 + ((u16)tuple->TupleData[4] << 8);
2053 + sprom->pa0b2 = tuple->TupleData[5] |
2054 + ((u16)tuple->TupleData[6] << 8);
2055 + sprom->itssi_a = tuple->TupleData[7];
2056 + sprom->itssi_bg = tuple->TupleData[7];
2057 + sprom->maxpwr_a = tuple->TupleData[8];
2058 + sprom->maxpwr_bg = tuple->TupleData[8];
2059 + break;
2060 + case SSB_PCMCIA_CIS_OEMNAME:
2061 + /* We ignore this. */
2062 + break;
2063 + case SSB_PCMCIA_CIS_CCODE:
2064 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
2065 + "ccode tpl size");
2066 + sprom->country_code = tuple->TupleData[1];
2067 + break;
2068 + case SSB_PCMCIA_CIS_ANTENNA:
2069 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
2070 + "ant tpl size");
2071 + sprom->ant_available_a = tuple->TupleData[1];
2072 + sprom->ant_available_bg = tuple->TupleData[1];
2073 + break;
2074 + case SSB_PCMCIA_CIS_ANTGAIN:
2075 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
2076 + "antg tpl size");
2077 + sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
2078 + sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
2079 + sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
2080 + sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
2081 + sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
2082 + sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
2083 + sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
2084 + sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
2085 + break;
2086 + case SSB_PCMCIA_CIS_BFLAGS:
2087 + GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
2088 + (tuple->TupleDataLen != 5),
2089 + "bfl tpl size");
2090 + sprom->boardflags_lo = tuple->TupleData[1] |
2091 + ((u16)tuple->TupleData[2] << 8);
2092 + break;
2093 + case SSB_PCMCIA_CIS_LEDS:
2094 + GOTO_ERROR_ON(tuple->TupleDataLen != 5,
2095 + "leds tpl size");
2096 + sprom->gpio0 = tuple->TupleData[1];
2097 + sprom->gpio1 = tuple->TupleData[2];
2098 + sprom->gpio2 = tuple->TupleData[3];
2099 + sprom->gpio3 = tuple->TupleData[4];
2100 + break;
2101 + }
2102 + return -ENOSPC; /* continue with next entry */
2103 +
2104 +error:
2105 + ssb_printk(KERN_ERR PFX
2106 + "PCMCIA: Failed to fetch device invariants: %s\n",
2107 + error_description);
2108 + return -ENODEV;
2109 +}
2110 +
2111 +
2112 +int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
2113 + struct ssb_init_invariants *iv)
2114 +{
2115 + struct ssb_sprom *sprom = &iv->sprom;
2116 + int res;
2117 +
2118 memset(sprom, 0xFF, sizeof(*sprom));
2119 sprom->revision = 1;
2120 sprom->boardflags_lo = 0;
2121 sprom->boardflags_hi = 0;
2122
2123 /* First fetch the MAC address. */
2124 - memset(&tuple, 0, sizeof(tuple));
2125 - tuple.DesiredTuple = CISTPL_FUNCE;
2126 - tuple.TupleData = buf;
2127 - tuple.TupleDataMax = sizeof(buf);
2128 - res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
2129 - GOTO_ERROR_ON(res != 0, "MAC first tpl");
2130 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
2131 - GOTO_ERROR_ON(res != 0, "MAC first tpl data");
2132 - while (1) {
2133 - GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
2134 - if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
2135 - break;
2136 - res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
2137 - GOTO_ERROR_ON(res != 0, "MAC next tpl");
2138 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
2139 - GOTO_ERROR_ON(res != 0, "MAC next tpl data");
2140 + res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
2141 + ssb_pcmcia_get_mac, sprom);
2142 + if (res != 0) {
2143 + ssb_printk(KERN_ERR PFX
2144 + "PCMCIA: Failed to fetch MAC address\n");
2145 + return -ENODEV;
2146 }
2147 - GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
2148 - memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
2149
2150 /* Fetch the vendor specific tuples. */
2151 - memset(&tuple, 0, sizeof(tuple));
2152 - tuple.DesiredTuple = SSB_PCMCIA_CIS;
2153 - tuple.TupleData = buf;
2154 - tuple.TupleDataMax = sizeof(buf);
2155 - res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
2156 - GOTO_ERROR_ON(res != 0, "VEN first tpl");
2157 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
2158 - GOTO_ERROR_ON(res != 0, "VEN first tpl data");
2159 - while (1) {
2160 - GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
2161 - switch (tuple.TupleData[0]) {
2162 - case SSB_PCMCIA_CIS_ID:
2163 - GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
2164 - (tuple.TupleDataLen != 7),
2165 - "id tpl size");
2166 - bi->vendor = tuple.TupleData[1] |
2167 - ((u16)tuple.TupleData[2] << 8);
2168 - break;
2169 - case SSB_PCMCIA_CIS_BOARDREV:
2170 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
2171 - "boardrev tpl size");
2172 - sprom->board_rev = tuple.TupleData[1];
2173 - break;
2174 - case SSB_PCMCIA_CIS_PA:
2175 - GOTO_ERROR_ON(tuple.TupleDataLen != 9,
2176 - "pa tpl size");
2177 - sprom->pa0b0 = tuple.TupleData[1] |
2178 - ((u16)tuple.TupleData[2] << 8);
2179 - sprom->pa0b1 = tuple.TupleData[3] |
2180 - ((u16)tuple.TupleData[4] << 8);
2181 - sprom->pa0b2 = tuple.TupleData[5] |
2182 - ((u16)tuple.TupleData[6] << 8);
2183 - sprom->itssi_a = tuple.TupleData[7];
2184 - sprom->itssi_bg = tuple.TupleData[7];
2185 - sprom->maxpwr_a = tuple.TupleData[8];
2186 - sprom->maxpwr_bg = tuple.TupleData[8];
2187 - break;
2188 - case SSB_PCMCIA_CIS_OEMNAME:
2189 - /* We ignore this. */
2190 - break;
2191 - case SSB_PCMCIA_CIS_CCODE:
2192 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
2193 - "ccode tpl size");
2194 - sprom->country_code = tuple.TupleData[1];
2195 - break;
2196 - case SSB_PCMCIA_CIS_ANTENNA:
2197 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
2198 - "ant tpl size");
2199 - sprom->ant_available_a = tuple.TupleData[1];
2200 - sprom->ant_available_bg = tuple.TupleData[1];
2201 - break;
2202 - case SSB_PCMCIA_CIS_ANTGAIN:
2203 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
2204 - "antg tpl size");
2205 - sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
2206 - sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
2207 - sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
2208 - sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
2209 - sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
2210 - sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
2211 - sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
2212 - sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
2213 - break;
2214 - case SSB_PCMCIA_CIS_BFLAGS:
2215 - GOTO_ERROR_ON(tuple.TupleDataLen != 3,
2216 - "bfl tpl size");
2217 - sprom->boardflags_lo = tuple.TupleData[1] |
2218 - ((u16)tuple.TupleData[2] << 8);
2219 - break;
2220 - case SSB_PCMCIA_CIS_LEDS:
2221 - GOTO_ERROR_ON(tuple.TupleDataLen != 5,
2222 - "leds tpl size");
2223 - sprom->gpio0 = tuple.TupleData[1];
2224 - sprom->gpio1 = tuple.TupleData[2];
2225 - sprom->gpio2 = tuple.TupleData[3];
2226 - sprom->gpio3 = tuple.TupleData[4];
2227 - break;
2228 - }
2229 - res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
2230 - if (res == -ENOSPC)
2231 - break;
2232 - GOTO_ERROR_ON(res != 0, "VEN next tpl");
2233 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
2234 - GOTO_ERROR_ON(res != 0, "VEN next tpl data");
2235 - }
2236 + res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
2237 + ssb_pcmcia_do_get_invariants, iv);
2238 + if ((res == 0) || (res == -ENOSPC))
2239 + return 0;
2240
2241 - return 0;
2242 -error:
2243 ssb_printk(KERN_ERR PFX
2244 - "PCMCIA: Failed to fetch device invariants: %s\n",
2245 - error_description);
2246 + "PCMCIA: Failed to fetch device invariants\n");
2247 return -ENODEV;
2248 }
2249
2250 --- a/drivers/ssb/scan.c
2251 +++ b/drivers/ssb/scan.c
2252 @@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid)
2253 static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
2254 u16 offset)
2255 {
2256 + u32 lo, hi;
2257 +
2258 switch (bus->bustype) {
2259 case SSB_BUSTYPE_SSB:
2260 offset += current_coreidx * SSB_CORE_SIZE;
2261 @@ -174,7 +176,12 @@ static u32 scan_read32(struct ssb_bus *b
2262 offset -= 0x800;
2263 } else
2264 ssb_pcmcia_switch_segment(bus, 0);
2265 - break;
2266 + lo = readw(bus->mmio + offset);
2267 + hi = readw(bus->mmio + offset + 2);
2268 + return lo | (hi << 16);
2269 + case SSB_BUSTYPE_SDIO:
2270 + offset += current_coreidx * SSB_CORE_SIZE;
2271 + return ssb_sdio_scan_read32(bus, offset);
2272 }
2273 return readl(bus->mmio + offset);
2274 }
2275 @@ -188,6 +195,8 @@ static int scan_switchcore(struct ssb_bu
2276 return ssb_pci_switch_coreidx(bus, coreidx);
2277 case SSB_BUSTYPE_PCMCIA:
2278 return ssb_pcmcia_switch_coreidx(bus, coreidx);
2279 + case SSB_BUSTYPE_SDIO:
2280 + return ssb_sdio_scan_switch_coreidx(bus, coreidx);
2281 }
2282 return 0;
2283 }
2284 @@ -206,6 +215,8 @@ void ssb_iounmap(struct ssb_bus *bus)
2285 SSB_BUG_ON(1); /* Can't reach this code. */
2286 #endif
2287 break;
2288 + case SSB_BUSTYPE_SDIO:
2289 + break;
2290 }
2291 bus->mmio = NULL;
2292 bus->mapped_device = NULL;
2293 @@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
2294 SSB_BUG_ON(1); /* Can't reach this code. */
2295 #endif
2296 break;
2297 + case SSB_BUSTYPE_SDIO:
2298 + /* Nothing to ioremap in the SDIO case, just fake it */
2299 + mmio = (void __iomem *)baseaddr;
2300 + break;
2301 }
2302
2303 return mmio;
2304 @@ -245,7 +260,10 @@ static int we_support_multiple_80211_cor
2305 #ifdef CONFIG_SSB_PCIHOST
2306 if (bus->bustype == SSB_BUSTYPE_PCI) {
2307 if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
2308 - bus->host_pci->device == 0x4324)
2309 + ((bus->host_pci->device == 0x4313) ||
2310 + (bus->host_pci->device == 0x431A) ||
2311 + (bus->host_pci->device == 0x4321) ||
2312 + (bus->host_pci->device == 0x4324)))
2313 return 1;
2314 }
2315 #endif /* CONFIG_SSB_PCIHOST */
2316 @@ -294,8 +312,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
2317 } else {
2318 if (bus->bustype == SSB_BUSTYPE_PCI) {
2319 bus->chip_id = pcidev_to_chipid(bus->host_pci);
2320 - pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
2321 - &bus->chip_rev);
2322 + bus->chip_rev = bus->host_pci->revision;
2323 bus->chip_package = 0;
2324 } else {
2325 bus->chip_id = 0x4710;
2326 @@ -339,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
2327 dev->bus = bus;
2328 dev->ops = bus->ops;
2329
2330 - ssb_dprintk(KERN_INFO PFX
2331 + printk(KERN_DEBUG PFX
2332 "Core %d found: %s "
2333 "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
2334 i, ssb_core_name(dev->id.coreid),
2335 @@ -407,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
2336 bus->pcicore.dev = dev;
2337 #endif /* CONFIG_SSB_DRIVER_PCICORE */
2338 break;
2339 + case SSB_DEV_ETHERNET:
2340 + if (bus->bustype == SSB_BUSTYPE_PCI) {
2341 + if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
2342 + (bus->host_pci->device & 0xFF00) == 0x4300) {
2343 + /* This is a dangling ethernet core on a
2344 + * wireless device. Ignore it. */
2345 + continue;
2346 + }
2347 + }
2348 + break;
2349 default:
2350 break;
2351 }
2352 --- /dev/null
2353 +++ b/drivers/ssb/sdio.c
2354 @@ -0,0 +1,610 @@
2355 +/*
2356 + * Sonics Silicon Backplane
2357 + * SDIO-Hostbus related functions
2358 + *
2359 + * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
2360 + *
2361 + * Based on drivers/ssb/pcmcia.c
2362 + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
2363 + * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
2364 + *
2365 + * Licensed under the GNU/GPL. See COPYING for details.
2366 + *
2367 + */
2368 +
2369 +#include <linux/ssb/ssb.h>
2370 +#include <linux/delay.h>
2371 +#include <linux/io.h>
2372 +#include <linux/etherdevice.h>
2373 +#include <linux/mmc/sdio_func.h>
2374 +
2375 +#include "ssb_private.h"
2376 +
2377 +/* Define the following to 1 to enable a printk on each coreswitch. */
2378 +#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 0
2379 +
2380 +
2381 +/* Hardware invariants CIS tuples */
2382 +#define SSB_SDIO_CIS 0x80
2383 +#define SSB_SDIO_CIS_SROMREV 0x00
2384 +#define SSB_SDIO_CIS_ID 0x01
2385 +#define SSB_SDIO_CIS_BOARDREV 0x02
2386 +#define SSB_SDIO_CIS_PA 0x03
2387 +#define SSB_SDIO_CIS_PA_PA0B0_LO 0
2388 +#define SSB_SDIO_CIS_PA_PA0B0_HI 1
2389 +#define SSB_SDIO_CIS_PA_PA0B1_LO 2
2390 +#define SSB_SDIO_CIS_PA_PA0B1_HI 3
2391 +#define SSB_SDIO_CIS_PA_PA0B2_LO 4
2392 +#define SSB_SDIO_CIS_PA_PA0B2_HI 5
2393 +#define SSB_SDIO_CIS_PA_ITSSI 6
2394 +#define SSB_SDIO_CIS_PA_MAXPOW 7
2395 +#define SSB_SDIO_CIS_OEMNAME 0x04
2396 +#define SSB_SDIO_CIS_CCODE 0x05
2397 +#define SSB_SDIO_CIS_ANTENNA 0x06
2398 +#define SSB_SDIO_CIS_ANTGAIN 0x07
2399 +#define SSB_SDIO_CIS_BFLAGS 0x08
2400 +#define SSB_SDIO_CIS_LEDS 0x09
2401 +
2402 +#define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */
2403 +
2404 +
2405 +/*
2406 + * Function 1 miscellaneous registers.
2407 + *
2408 + * Definitions match src/include/sbsdio.h from the
2409 + * Android Open Source Project
2410 + * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
2411 + *
2412 + */
2413 +#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */
2414 +#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */
2415 +#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */
2416 +
2417 +/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
2418 +#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */
2419 +#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */
2420 +#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */
2421 +
2422 +#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */
2423 +
2424 +/* REVISIT: this flag doesn't seem to matter */
2425 +#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */
2426 +
2427 +
2428 +/*
2429 + * Address map within the SDIO function address space (128K).
2430 + *
2431 + * Start End Description
2432 + * ------- ------- ------------------------------------------
2433 + * 0x00000 0x0ffff selected backplane address window (64K)
2434 + * 0x10000 0x1ffff backplane control registers (max 64K)
2435 + *
2436 + * The current address window is configured by writing to registers
2437 + * SBADDRLOW, SBADDRMID and SBADDRHIGH.
2438 + *
2439 + * In order to access the contents of a 32-bit Silicon Backplane address
2440 + * the backplane address window must be first loaded with the highest
2441 + * 16 bits of the target address. Then, an access must be done to the
2442 + * SDIO function address space using the lower 15 bits of the address.
2443 + * Bit 15 of the address must be set when doing 32 bit accesses.
2444 + *
2445 + * 10987654321098765432109876543210
2446 + * WWWWWWWWWWWWWWWWW SB Address Window
2447 + * OOOOOOOOOOOOOOOO Offset within SB Address Window
2448 + * a 32-bit access flag
2449 + */
2450 +
2451 +
2452 +/*
2453 + * SSB I/O via SDIO.
2454 + *
2455 + * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
2456 + */
2457 +
2458 +static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
2459 +{
2460 + return &bus->host_sdio->dev;
2461 +}
2462 +
2463 +/* host claimed */
2464 +static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
2465 +{
2466 + int error = 0;
2467 +
2468 + sdio_writeb(bus->host_sdio, val, addr, &error);
2469 + if (unlikely(error)) {
2470 + dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
2471 + addr, val, error);
2472 + }
2473 +
2474 + return error;
2475 +}
2476 +
2477 +#if 0
2478 +static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
2479 +{
2480 + u8 val;
2481 + int error = 0;
2482 +
2483 + val = sdio_readb(bus->host_sdio, addr, &error);
2484 + if (unlikely(error)) {
2485 + dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
2486 + addr, val, error);
2487 + }
2488 +
2489 + return val;
2490 +}
2491 +#endif
2492 +
2493 +/* host claimed */
2494 +static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
2495 +{
2496 + int error;
2497 +
2498 + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
2499 + (address >> 8) & SBSDIO_SBADDRLOW_MASK);
2500 + if (error)
2501 + goto out;
2502 + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
2503 + (address >> 16) & SBSDIO_SBADDRMID_MASK);
2504 + if (error)
2505 + goto out;
2506 + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
2507 + (address >> 24) & SBSDIO_SBADDRHIGH_MASK);
2508 + if (error)
2509 + goto out;
2510 + bus->sdio_sbaddr = address;
2511 +out:
2512 + if (error) {
2513 + dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
2514 + " to 0x%08x, error %d\n", address, error);
2515 + }
2516 +
2517 + return error;
2518 +}
2519 +
2520 +/* for enumeration use only */
2521 +u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
2522 +{
2523 + u32 val;
2524 + int error;
2525 +
2526 + sdio_claim_host(bus->host_sdio);
2527 + val = sdio_readl(bus->host_sdio, offset, &error);
2528 + sdio_release_host(bus->host_sdio);
2529 + if (unlikely(error)) {
2530 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
2531 + bus->sdio_sbaddr >> 16, offset, val, error);
2532 + }
2533 +
2534 + return val;
2535 +}
2536 +
2537 +/* for enumeration use only */
2538 +int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
2539 +{
2540 + u32 sbaddr;
2541 + int error;
2542 +
2543 + sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
2544 + sdio_claim_host(bus->host_sdio);
2545 + error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
2546 + sdio_release_host(bus->host_sdio);
2547 + if (error) {
2548 + dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
2549 + " error %d\n", coreidx, error);
2550 + goto out;
2551 + }
2552 +out:
2553 + return error;
2554 +}
2555 +
2556 +/* host must be already claimed */
2557 +int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
2558 +{
2559 + u8 coreidx = dev->core_index;
2560 + u32 sbaddr;
2561 + int error = 0;
2562 +
2563 + sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
2564 + if (unlikely(bus->sdio_sbaddr != sbaddr)) {
2565 +#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
2566 + dev_info(ssb_sdio_dev(bus),
2567 + "switching to %s core, index %d\n",
2568 + ssb_core_name(dev->id.coreid), coreidx);
2569 +#endif
2570 + error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
2571 + if (error) {
2572 + dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
2573 + " core %u, error %d\n", coreidx, error);
2574 + goto out;
2575 + }
2576 + bus->mapped_device = dev;
2577 + }
2578 +
2579 +out:
2580 + return error;
2581 +}
2582 +
2583 +static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
2584 +{
2585 + struct ssb_bus *bus = dev->bus;
2586 + u8 val = 0xff;
2587 + int error = 0;
2588 +
2589 + sdio_claim_host(bus->host_sdio);
2590 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
2591 + goto out;
2592 + offset |= bus->sdio_sbaddr & 0xffff;
2593 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
2594 + val = sdio_readb(bus->host_sdio, offset, &error);
2595 + if (error) {
2596 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
2597 + bus->sdio_sbaddr >> 16, offset, val, error);
2598 + }
2599 +out:
2600 + sdio_release_host(bus->host_sdio);
2601 +
2602 + return val;
2603 +}
2604 +
2605 +static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
2606 +{
2607 + struct ssb_bus *bus = dev->bus;
2608 + u16 val = 0xffff;
2609 + int error = 0;
2610 +
2611 + sdio_claim_host(bus->host_sdio);
2612 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
2613 + goto out;
2614 + offset |= bus->sdio_sbaddr & 0xffff;
2615 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
2616 + val = sdio_readw(bus->host_sdio, offset, &error);
2617 + if (error) {
2618 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
2619 + bus->sdio_sbaddr >> 16, offset, val, error);
2620 + }
2621 +out:
2622 + sdio_release_host(bus->host_sdio);
2623 +
2624 + return val;
2625 +}
2626 +
2627 +static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
2628 +{
2629 + struct ssb_bus *bus = dev->bus;
2630 + u32 val = 0xffffffff;
2631 + int error = 0;
2632 +
2633 + sdio_claim_host(bus->host_sdio);
2634 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
2635 + goto out;
2636 + offset |= bus->sdio_sbaddr & 0xffff;
2637 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
2638 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
2639 + val = sdio_readl(bus->host_sdio, offset, &error);
2640 + if (error) {
2641 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
2642 + bus->sdio_sbaddr >> 16, offset, val, error);
2643 + }
2644 +out:
2645 + sdio_release_host(bus->host_sdio);
2646 +
2647 + return val;
2648 +}
2649 +
2650 +#ifdef CONFIG_SSB_BLOCKIO
2651 +static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
2652 + size_t count, u16 offset, u8 reg_width)
2653 +{
2654 + size_t saved_count = count;
2655 + struct ssb_bus *bus = dev->bus;
2656 + int error = 0;
2657 +
2658 + sdio_claim_host(bus->host_sdio);
2659 + if (unlikely(ssb_sdio_switch_core(bus, dev))) {
2660 + error = -EIO;
2661 + memset(buffer, 0xff, count);
2662 + goto err_out;
2663 + }
2664 + offset |= bus->sdio_sbaddr & 0xffff;
2665 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
2666 +
2667 + switch (reg_width) {
2668 + case sizeof(u8): {
2669 + error = sdio_readsb(bus->host_sdio, buffer, offset, count);
2670 + break;
2671 + }
2672 + case sizeof(u16): {
2673 + SSB_WARN_ON(count & 1);
2674 + error = sdio_readsb(bus->host_sdio, buffer, offset, count);
2675 + break;
2676 + }
2677 + case sizeof(u32): {
2678 + SSB_WARN_ON(count & 3);
2679 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
2680 + error = sdio_readsb(bus->host_sdio, buffer, offset, count);
2681 + break;
2682 + }
2683 + default:
2684 + SSB_WARN_ON(1);
2685 + }
2686 + if (!error)
2687 + goto out;
2688 +
2689 +err_out:
2690 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
2691 + bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
2692 +out:
2693 + sdio_release_host(bus->host_sdio);
2694 +}
2695 +#endif /* CONFIG_SSB_BLOCKIO */
2696 +
2697 +static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
2698 +{
2699 + struct ssb_bus *bus = dev->bus;
2700 + int error = 0;
2701 +
2702 + sdio_claim_host(bus->host_sdio);
2703 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
2704 + goto out;
2705 + offset |= bus->sdio_sbaddr & 0xffff;
2706 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
2707 + sdio_writeb(bus->host_sdio, val, offset, &error);
2708 + if (error) {
2709 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
2710 + bus->sdio_sbaddr >> 16, offset, val, error);
2711 + }
2712 +out:
2713 + sdio_release_host(bus->host_sdio);
2714 +}
2715 +
2716 +static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
2717 +{
2718 + struct ssb_bus *bus = dev->bus;
2719 + int error = 0;
2720 +
2721 + sdio_claim_host(bus->host_sdio);
2722 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
2723 + goto out;
2724 + offset |= bus->sdio_sbaddr & 0xffff;
2725 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
2726 + sdio_writew(bus->host_sdio, val, offset, &error);
2727 + if (error) {
2728 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
2729 + bus->sdio_sbaddr >> 16, offset, val, error);
2730 + }
2731 +out:
2732 + sdio_release_host(bus->host_sdio);
2733 +}
2734 +
2735 +static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
2736 +{
2737 + struct ssb_bus *bus = dev->bus;
2738 + int error = 0;
2739 +
2740 + sdio_claim_host(bus->host_sdio);
2741 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
2742 + goto out;
2743 + offset |= bus->sdio_sbaddr & 0xffff;
2744 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
2745 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
2746 + sdio_writel(bus->host_sdio, val, offset, &error);
2747 + if (error) {
2748 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
2749 + bus->sdio_sbaddr >> 16, offset, val, error);
2750 + }
2751 + if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
2752 + sdio_readl(bus->host_sdio, 0, &error);
2753 +out:
2754 + sdio_release_host(bus->host_sdio);
2755 +}
2756 +
2757 +#ifdef CONFIG_SSB_BLOCKIO
2758 +static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
2759 + size_t count, u16 offset, u8 reg_width)
2760 +{
2761 + size_t saved_count = count;
2762 + struct ssb_bus *bus = dev->bus;
2763 + int error = 0;
2764 +
2765 + sdio_claim_host(bus->host_sdio);
2766 + if (unlikely(ssb_sdio_switch_core(bus, dev))) {
2767 + error = -EIO;
2768 + memset((void *)buffer, 0xff, count);
2769 + goto err_out;
2770 + }
2771 + offset |= bus->sdio_sbaddr & 0xffff;
2772 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
2773 +
2774 + switch (reg_width) {
2775 + case sizeof(u8):
2776 + error = sdio_writesb(bus->host_sdio, offset,
2777 + (void *)buffer, count);
2778 + break;
2779 + case sizeof(u16):
2780 + SSB_WARN_ON(count & 1);
2781 + error = sdio_writesb(bus->host_sdio, offset,
2782 + (void *)buffer, count);
2783 + break;
2784 + case sizeof(u32):
2785 + SSB_WARN_ON(count & 3);
2786 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
2787 + error = sdio_writesb(bus->host_sdio, offset,
2788 + (void *)buffer, count);
2789 + break;
2790 + default:
2791 + SSB_WARN_ON(1);
2792 + }
2793 + if (!error)
2794 + goto out;
2795 +
2796 +err_out:
2797 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
2798 + bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
2799 +out:
2800 + sdio_release_host(bus->host_sdio);
2801 +}
2802 +
2803 +#endif /* CONFIG_SSB_BLOCKIO */
2804 +
2805 +/* Not "static", as it's used in main.c */
2806 +const struct ssb_bus_ops ssb_sdio_ops = {
2807 + .read8 = ssb_sdio_read8,
2808 + .read16 = ssb_sdio_read16,
2809 + .read32 = ssb_sdio_read32,
2810 + .write8 = ssb_sdio_write8,
2811 + .write16 = ssb_sdio_write16,
2812 + .write32 = ssb_sdio_write32,
2813 +#ifdef CONFIG_SSB_BLOCKIO
2814 + .block_read = ssb_sdio_block_read,
2815 + .block_write = ssb_sdio_block_write,
2816 +#endif
2817 +};
2818 +
2819 +#define GOTO_ERROR_ON(condition, description) do { \
2820 + if (unlikely(condition)) { \
2821 + error_description = description; \
2822 + goto error; \
2823 + } \
2824 + } while (0)
2825 +
2826 +int ssb_sdio_get_invariants(struct ssb_bus *bus,
2827 + struct ssb_init_invariants *iv)
2828 +{
2829 + struct ssb_sprom *sprom = &iv->sprom;
2830 + struct ssb_boardinfo *bi = &iv->boardinfo;
2831 + const char *error_description = "none";
2832 + struct sdio_func_tuple *tuple;
2833 + void *mac;
2834 +
2835 + memset(sprom, 0xFF, sizeof(*sprom));
2836 + sprom->boardflags_lo = 0;
2837 + sprom->boardflags_hi = 0;
2838 +
2839 + tuple = bus->host_sdio->tuples;
2840 + while (tuple) {
2841 + switch (tuple->code) {
2842 + case 0x22: /* extended function */
2843 + switch (tuple->data[0]) {
2844 + case CISTPL_FUNCE_LAN_NODE_ID:
2845 + GOTO_ERROR_ON((tuple->size != 7) &&
2846 + (tuple->data[1] != 6),
2847 + "mac tpl size");
2848 + /* fetch the MAC address. */
2849 + mac = tuple->data + 2;
2850 + memcpy(sprom->il0mac, mac, ETH_ALEN);
2851 + memcpy(sprom->et1mac, mac, ETH_ALEN);
2852 + break;
2853 + default:
2854 + break;
2855 + }
2856 + break;
2857 + case 0x80: /* vendor specific tuple */
2858 + switch (tuple->data[0]) {
2859 + case SSB_SDIO_CIS_SROMREV:
2860 + GOTO_ERROR_ON(tuple->size != 2,
2861 + "sromrev tpl size");
2862 + sprom->revision = tuple->data[1];
2863 + break;
2864 + case SSB_SDIO_CIS_ID:
2865 + GOTO_ERROR_ON((tuple->size != 5) &&
2866 + (tuple->size != 7),
2867 + "id tpl size");
2868 + bi->vendor = tuple->data[1] |
2869 + (tuple->data[2]<<8);
2870 + break;
2871 + case SSB_SDIO_CIS_BOARDREV:
2872 + GOTO_ERROR_ON(tuple->size != 2,
2873 + "boardrev tpl size");
2874 + sprom->board_rev = tuple->data[1];
2875 + break;
2876 + case SSB_SDIO_CIS_PA:
2877 + GOTO_ERROR_ON((tuple->size != 9) &&
2878 + (tuple->size != 10),
2879 + "pa tpl size");
2880 + sprom->pa0b0 = tuple->data[1] |
2881 + ((u16)tuple->data[2] << 8);
2882 + sprom->pa0b1 = tuple->data[3] |
2883 + ((u16)tuple->data[4] << 8);
2884 + sprom->pa0b2 = tuple->data[5] |
2885 + ((u16)tuple->data[6] << 8);
2886 + sprom->itssi_a = tuple->data[7];
2887 + sprom->itssi_bg = tuple->data[7];
2888 + sprom->maxpwr_a = tuple->data[8];
2889 + sprom->maxpwr_bg = tuple->data[8];
2890 + break;
2891 + case SSB_SDIO_CIS_OEMNAME:
2892 + /* Not present */
2893 + break;
2894 + case SSB_SDIO_CIS_CCODE:
2895 + GOTO_ERROR_ON(tuple->size != 2,
2896 + "ccode tpl size");
2897 + sprom->country_code = tuple->data[1];
2898 + break;
2899 + case SSB_SDIO_CIS_ANTENNA:
2900 + GOTO_ERROR_ON(tuple->size != 2,
2901 + "ant tpl size");
2902 + sprom->ant_available_a = tuple->data[1];
2903 + sprom->ant_available_bg = tuple->data[1];
2904 + break;
2905 + case SSB_SDIO_CIS_ANTGAIN:
2906 + GOTO_ERROR_ON(tuple->size != 2,
2907 + "antg tpl size");
2908 + sprom->antenna_gain.ghz24.a0 = tuple->data[1];
2909 + sprom->antenna_gain.ghz24.a1 = tuple->data[1];
2910 + sprom->antenna_gain.ghz24.a2 = tuple->data[1];
2911 + sprom->antenna_gain.ghz24.a3 = tuple->data[1];
2912 + sprom->antenna_gain.ghz5.a0 = tuple->data[1];
2913 + sprom->antenna_gain.ghz5.a1 = tuple->data[1];
2914 + sprom->antenna_gain.ghz5.a2 = tuple->data[1];
2915 + sprom->antenna_gain.ghz5.a3 = tuple->data[1];
2916 + break;
2917 + case SSB_SDIO_CIS_BFLAGS:
2918 + GOTO_ERROR_ON((tuple->size != 3) &&
2919 + (tuple->size != 5),
2920 + "bfl tpl size");
2921 + sprom->boardflags_lo = tuple->data[1] |
2922 + ((u16)tuple->data[2] << 8);
2923 + break;
2924 + case SSB_SDIO_CIS_LEDS:
2925 + GOTO_ERROR_ON(tuple->size != 5,
2926 + "leds tpl size");
2927 + sprom->gpio0 = tuple->data[1];
2928 + sprom->gpio1 = tuple->data[2];
2929 + sprom->gpio2 = tuple->data[3];
2930 + sprom->gpio3 = tuple->data[4];
2931 + break;
2932 + default:
2933 + break;
2934 + }
2935 + break;
2936 + default:
2937 + break;
2938 + }
2939 + tuple = tuple->next;
2940 + }
2941 +
2942 + return 0;
2943 +error:
2944 + dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
2945 + error_description);
2946 + return -ENODEV;
2947 +}
2948 +
2949 +void ssb_sdio_exit(struct ssb_bus *bus)
2950 +{
2951 + if (bus->bustype != SSB_BUSTYPE_SDIO)
2952 + return;
2953 + /* Nothing to do here. */
2954 +}
2955 +
2956 +int ssb_sdio_init(struct ssb_bus *bus)
2957 +{
2958 + if (bus->bustype != SSB_BUSTYPE_SDIO)
2959 + return 0;
2960 +
2961 + bus->sdio_sbaddr = ~0;
2962 +
2963 + return 0;
2964 +}
2965 --- a/drivers/ssb/sprom.c
2966 +++ b/drivers/ssb/sprom.c
2967 @@ -13,8 +13,11 @@
2968
2969 #include "ssb_private.h"
2970
2971 +#include <linux/ctype.h>
2972 +#include <linux/slab.h>
2973
2974 -static const struct ssb_sprom *fallback_sprom;
2975 +
2976 +static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
2977
2978
2979 static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
2980 @@ -33,17 +36,27 @@ static int sprom2hex(const u16 *sprom, c
2981 static int hex2sprom(u16 *sprom, const char *dump, size_t len,
2982 size_t sprom_size_words)
2983 {
2984 - char tmp[5] = { 0 };
2985 - int cnt = 0;
2986 + char c, tmp[5] = { 0 };
2987 + int err, cnt = 0;
2988 unsigned long parsed;
2989
2990 - if (len < sprom_size_words * 2)
2991 + /* Strip whitespace at the end. */
2992 + while (len) {
2993 + c = dump[len - 1];
2994 + if (!isspace(c) && c != '\0')
2995 + break;
2996 + len--;
2997 + }
2998 + /* Length must match exactly. */
2999 + if (len != sprom_size_words * 4)
3000 return -EINVAL;
3001
3002 while (cnt < sprom_size_words) {
3003 memcpy(tmp, dump, 4);
3004 dump += 4;
3005 - parsed = simple_strtoul(tmp, NULL, 16);
3006 + err = strict_strtoul(tmp, 16, &parsed);
3007 + if (err)
3008 + return err;
3009 sprom[cnt++] = swab16((u16)parsed);
3010 }
3011
3012 @@ -90,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
3013 u16 *sprom;
3014 int res = 0, err = -ENOMEM;
3015 size_t sprom_size_words = bus->sprom_size;
3016 + struct ssb_freeze_context freeze;
3017
3018 sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
3019 if (!sprom)
3020 @@ -111,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
3021 err = -ERESTARTSYS;
3022 if (mutex_lock_interruptible(&bus->sprom_mutex))
3023 goto out_kfree;
3024 - err = ssb_devices_freeze(bus);
3025 - if (err == -EOPNOTSUPP) {
3026 - ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
3027 - "No suspend support. Is CONFIG_PM enabled?\n");
3028 - goto out_unlock;
3029 - }
3030 + err = ssb_devices_freeze(bus, &freeze);
3031 if (err) {
3032 ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
3033 goto out_unlock;
3034 }
3035 res = sprom_write(bus, sprom);
3036 - err = ssb_devices_thaw(bus);
3037 + err = ssb_devices_thaw(&freeze);
3038 if (err)
3039 ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
3040 out_unlock:
3041 @@ -136,34 +145,56 @@ out:
3042 }
3043
3044 /**
3045 - * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
3046 + * ssb_arch_register_fallback_sprom - Registers a method providing a
3047 + * fallback SPROM if no SPROM is found.
3048 *
3049 - * @sprom: The SPROM data structure to register.
3050 + * @sprom_callback: The callback function.
3051 *
3052 - * With this function the architecture implementation may register a fallback
3053 - * SPROM data structure. The fallback is only used for PCI based SSB devices,
3054 - * where no valid SPROM can be found in the shadow registers.
3055 + * With this function the architecture implementation may register a
3056 + * callback handler which fills the SPROM data structure. The fallback is
3057 + * only used for PCI based SSB devices, where no valid SPROM can be found
3058 + * in the shadow registers.
3059 *
3060 - * This function is useful for weird architectures that have a half-assed SSB device
3061 - * hardwired to their PCI bus.
3062 + * This function is useful for weird architectures that have a half-assed
3063 + * SSB device hardwired to their PCI bus.
3064 *
3065 - * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
3066 - * don't use this fallback.
3067 - * Architectures must provide the SPROM for native SSB devices anyway,
3068 - * so the fallback also isn't used for native devices.
3069 + * Note that it does only work with PCI attached SSB devices. PCMCIA
3070 + * devices currently don't use this fallback.
3071 + * Architectures must provide the SPROM for native SSB devices anyway, so
3072 + * the fallback also isn't used for native devices.
3073 *
3074 - * This function is available for architecture code, only. So it is not exported.
3075 + * This function is available for architecture code, only. So it is not
3076 + * exported.
3077 */
3078 -int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
3079 +int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
3080 + struct ssb_sprom *out))
3081 {
3082 - if (fallback_sprom)
3083 + if (get_fallback_sprom)
3084 return -EEXIST;
3085 - fallback_sprom = sprom;
3086 + get_fallback_sprom = sprom_callback;
3087
3088 return 0;
3089 }
3090
3091 -const struct ssb_sprom *ssb_get_fallback_sprom(void)
3092 +int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
3093 {
3094 - return fallback_sprom;
3095 + if (!get_fallback_sprom)
3096 + return -ENOENT;
3097 +
3098 + return get_fallback_sprom(bus, out);
3099 +}
3100 +
3101 +/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
3102 +bool ssb_is_sprom_available(struct ssb_bus *bus)
3103 +{
3104 + /* status register only exists on chipcomon rev >= 11 and we need check
3105 + for >= 31 only */
3106 + /* this routine differs from specs as we do not access SPROM directly
3107 + on PCMCIA */
3108 + if (bus->bustype == SSB_BUSTYPE_PCI &&
3109 + bus->chipco.dev && /* can be unavailable! */
3110 + bus->chipco.dev->id.revision >= 31)
3111 + return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
3112 +
3113 + return true;
3114 }
3115 --- a/drivers/ssb/ssb_private.h
3116 +++ b/drivers/ssb/ssb_private.h
3117 @@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct
3118 }
3119 #endif /* CONFIG_SSB_PCMCIAHOST */
3120
3121 +/* sdio.c */
3122 +#ifdef CONFIG_SSB_SDIOHOST
3123 +extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
3124 + struct ssb_init_invariants *iv);
3125 +
3126 +extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
3127 +extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
3128 +extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
3129 +extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
3130 +extern void ssb_sdio_exit(struct ssb_bus *bus);
3131 +extern int ssb_sdio_init(struct ssb_bus *bus);
3132 +
3133 +extern const struct ssb_bus_ops ssb_sdio_ops;
3134 +#else /* CONFIG_SSB_SDIOHOST */
3135 +static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
3136 +{
3137 + return 0;
3138 +}
3139 +static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
3140 + struct ssb_device *dev)
3141 +{
3142 + return 0;
3143 +}
3144 +static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
3145 +{
3146 + return 0;
3147 +}
3148 +static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
3149 +{
3150 + return 0;
3151 +}
3152 +static inline void ssb_sdio_exit(struct ssb_bus *bus)
3153 +{
3154 +}
3155 +static inline int ssb_sdio_init(struct ssb_bus *bus)
3156 +{
3157 + return 0;
3158 +}
3159 +#endif /* CONFIG_SSB_SDIOHOST */
3160 +
3161
3162 /* scan.c */
3163 extern const char *ssb_core_name(u16 coreid);
3164 @@ -131,24 +171,33 @@ ssize_t ssb_attr_sprom_store(struct ssb_
3165 const char *buf, size_t count,
3166 int (*sprom_check_crc)(const u16 *sprom, size_t size),
3167 int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
3168 -extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
3169 +extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
3170 + struct ssb_sprom *out);
3171
3172
3173 /* core.c */
3174 extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
3175 -extern int ssb_devices_freeze(struct ssb_bus *bus);
3176 -extern int ssb_devices_thaw(struct ssb_bus *bus);
3177 extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
3178 int ssb_for_each_bus_call(unsigned long data,
3179 int (*func)(struct ssb_bus *bus, unsigned long data));
3180 extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
3181
3182 +struct ssb_freeze_context {
3183 + /* Pointer to the bus */
3184 + struct ssb_bus *bus;
3185 + /* Boolean list to indicate whether a device is frozen on this bus. */
3186 + bool device_frozen[SSB_MAX_NR_CORES];
3187 +};
3188 +extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
3189 +extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
3190 +
3191 +
3192
3193 /* b43_pci_bridge.c */
3194 #ifdef CONFIG_SSB_B43_PCI_BRIDGE
3195 extern int __init b43_pci_ssb_bridge_init(void);
3196 extern void __exit b43_pci_ssb_bridge_exit(void);
3197 -#else /* CONFIG_SSB_B43_PCI_BRIDGR */
3198 +#else /* CONFIG_SSB_B43_PCI_BRIDGE */
3199 static inline int b43_pci_ssb_bridge_init(void)
3200 {
3201 return 0;
3202 @@ -156,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini
3203 static inline void b43_pci_ssb_bridge_exit(void)
3204 {
3205 }
3206 -#endif /* CONFIG_SSB_PCIHOST */
3207 +#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
3208
3209 #endif /* LINUX_SSB_PRIVATE_H_ */
3210 --- a/include/linux/pci_ids.h
3211 +++ b/include/linux/pci_ids.h
3212 @@ -2034,6 +2034,7 @@
3213 #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
3214 #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
3215
3216 +#define PCI_VENDOR_ID_BCM_GVC 0x14a4
3217 #define PCI_VENDOR_ID_BROADCOM 0x14e4
3218 #define PCI_DEVICE_ID_TIGON3_5752 0x1600
3219 #define PCI_DEVICE_ID_TIGON3_5752M 0x1601
3220 --- a/include/linux/ssb/ssb.h
3221 +++ b/include/linux/ssb/ssb.h
3222 @@ -27,24 +27,60 @@ struct ssb_sprom {
3223 u8 et1mdcport; /* MDIO for enet1 */
3224 u8 board_rev; /* Board revision number from SPROM. */
3225 u8 country_code; /* Country Code */
3226 - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
3227 - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
3228 + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
3229 + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
3230 + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
3231 + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
3232 u16 pa0b0;
3233 u16 pa0b1;
3234 u16 pa0b2;
3235 u16 pa1b0;
3236 u16 pa1b1;
3237 u16 pa1b2;
3238 + u16 pa1lob0;
3239 + u16 pa1lob1;
3240 + u16 pa1lob2;
3241 + u16 pa1hib0;
3242 + u16 pa1hib1;
3243 + u16 pa1hib2;
3244 u8 gpio0; /* GPIO pin 0 */
3245 u8 gpio1; /* GPIO pin 1 */
3246 u8 gpio2; /* GPIO pin 2 */
3247 u8 gpio3; /* GPIO pin 3 */
3248 - u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
3249 - u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
3250 + u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
3251 + u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
3252 + u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
3253 + u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
3254 u8 itssi_a; /* Idle TSSI Target for A-PHY */
3255 u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
3256 - u16 boardflags_lo; /* Boardflags (low 16 bits) */
3257 - u16 boardflags_hi; /* Boardflags (high 16 bits) */
3258 + u8 tri2g; /* 2.4GHz TX isolation */
3259 + u8 tri5gl; /* 5.2GHz TX isolation */
3260 + u8 tri5g; /* 5.3GHz TX isolation */
3261 + u8 tri5gh; /* 5.8GHz TX isolation */
3262 + u8 txpid2g[4]; /* 2GHz TX power index */
3263 + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
3264 + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
3265 + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
3266 + u8 rxpo2g; /* 2GHz RX power offset */
3267 + u8 rxpo5g; /* 5GHz RX power offset */
3268 + u8 rssisav2g; /* 2GHz RSSI params */
3269 + u8 rssismc2g;
3270 + u8 rssismf2g;
3271 + u8 bxa2g; /* 2GHz BX arch */
3272 + u8 rssisav5g; /* 5GHz RSSI params */
3273 + u8 rssismc5g;
3274 + u8 rssismf5g;
3275 + u8 bxa5g; /* 5GHz BX arch */
3276 + u16 cck2gpo; /* CCK power offset */
3277 + u32 ofdm2gpo; /* 2.4GHz OFDM power offset */
3278 + u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
3279 + u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
3280 + u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
3281 + u16 boardflags_lo; /* Board flags (bits 0-15) */
3282 + u16 boardflags_hi; /* Board flags (bits 16-31) */
3283 + u16 boardflags2_lo; /* Board flags (bits 32-47) */
3284 + u16 boardflags2_hi; /* Board flags (bits 48-63) */
3285 + /* TODO store board flags in a single u64 */
3286
3287 /* Antenna gain values for up to 4 antennas
3288 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
3289 @@ -58,14 +94,14 @@ struct ssb_sprom {
3290 } ghz5; /* 5GHz band */
3291 } antenna_gain;
3292
3293 - /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
3294 + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
3295 };
3296
3297 /* Information about the PCB the circuitry is soldered on. */
3298 struct ssb_boardinfo {
3299 u16 vendor;
3300 u16 type;
3301 - u16 rev;
3302 + u8 rev;
3303 };
3304
3305
3306 @@ -137,7 +173,7 @@ struct ssb_device {
3307 * is an optimization. */
3308 const struct ssb_bus_ops *ops;
3309
3310 - struct device *dev;
3311 + struct device *dev, *dma_dev;
3312
3313 struct ssb_bus *bus;
3314 struct ssb_device_id id;
3315 @@ -208,6 +244,7 @@ enum ssb_bustype {
3316 SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
3317 SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
3318 SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
3319 + SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
3320 };
3321
3322 /* board_vendor */
3323 @@ -238,20 +275,33 @@ struct ssb_bus {
3324
3325 const struct ssb_bus_ops *ops;
3326
3327 - /* The core in the basic address register window. (PCI bus only) */
3328 + /* The core currently mapped into the MMIO window.
3329 + * Not valid on all host-buses. So don't use outside of SSB. */
3330 struct ssb_device *mapped_device;
3331 - /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
3332 - u8 mapped_pcmcia_seg;
3333 + union {
3334 + /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
3335 + u8 mapped_pcmcia_seg;
3336 + /* Current SSB base address window for SDIO. */
3337 + u32 sdio_sbaddr;
3338 + };
3339 /* Lock for core and segment switching.
3340 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
3341 spinlock_t bar_lock;
3342
3343 - /* The bus this backplane is running on. */
3344 + /* The host-bus this backplane is running on. */
3345 enum ssb_bustype bustype;
3346 - /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
3347 - struct pci_dev *host_pci;
3348 - /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
3349 - struct pcmcia_device *host_pcmcia;
3350 + /* Pointers to the host-bus. Check bustype before using any of these pointers. */
3351 + union {
3352 + /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
3353 + struct pci_dev *host_pci;
3354 + /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
3355 + struct pcmcia_device *host_pcmcia;
3356 + /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
3357 + struct sdio_func *host_sdio;
3358 + };
3359 +
3360 + /* See enum ssb_quirks */
3361 + unsigned int quirks;
3362
3363 #ifdef CONFIG_SSB_SPROM
3364 /* Mutex to protect the SPROM writing. */
3365 @@ -260,7 +310,8 @@ struct ssb_bus {
3366
3367 /* ID information about the Chip. */
3368 u16 chip_id;
3369 - u16 chip_rev;
3370 + u8 chip_rev;
3371 + u16 sprom_offset;
3372 u16 sprom_size; /* number of words in sprom */
3373 u8 chip_package;
3374
3375 @@ -306,6 +357,11 @@ struct ssb_bus {
3376 #endif /* DEBUG */
3377 };
3378
3379 +enum ssb_quirks {
3380 + /* SDIO connected card requires performing a read after writing a 32-bit value */
3381 + SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
3382 +};
3383 +
3384 /* The initialization-invariants. */
3385 struct ssb_init_invariants {
3386 /* Versioning information about the PCB. */
3387 @@ -336,12 +392,23 @@ extern int ssb_bus_pcmciabus_register(st
3388 struct pcmcia_device *pcmcia_dev,
3389 unsigned long baseaddr);
3390 #endif /* CONFIG_SSB_PCMCIAHOST */
3391 +#ifdef CONFIG_SSB_SDIOHOST
3392 +extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
3393 + struct sdio_func *sdio_func,
3394 + unsigned int quirks);
3395 +#endif /* CONFIG_SSB_SDIOHOST */
3396 +
3397
3398 extern void ssb_bus_unregister(struct ssb_bus *bus);
3399
3400 +/* Does the device have an SPROM? */
3401 +extern bool ssb_is_sprom_available(struct ssb_bus *bus);
3402 +
3403 /* Set a fallback SPROM.
3404 * See kdoc at the function definition for complete documentation. */
3405 -extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
3406 +extern int ssb_arch_register_fallback_sprom(
3407 + int (*sprom_callback)(struct ssb_bus *bus,
3408 + struct ssb_sprom *out));
3409
3410 /* Suspend a SSB bus.
3411 * Call this from the parent bus suspend routine. */
3412 @@ -612,6 +679,7 @@ extern int ssb_bus_may_powerdown(struct
3413 * Otherwise static always-on powercontrol will be used. */
3414 extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
3415
3416 +extern void ssb_commit_settings(struct ssb_bus *bus);
3417
3418 /* Various helper functions */
3419 extern u32 ssb_admatch_base(u32 adm);
3420 --- a/include/linux/ssb/ssb_driver_chipcommon.h
3421 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
3422 @@ -53,6 +53,7 @@
3423 #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
3424 #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
3425 #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
3426 +#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */
3427 #define SSB_CHIPCO_CORECTL 0x0008
3428 #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
3429 #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
3430 @@ -122,6 +123,8 @@
3431 #define SSB_CHIPCO_FLASHDATA 0x0048
3432 #define SSB_CHIPCO_BCAST_ADDR 0x0050
3433 #define SSB_CHIPCO_BCAST_DATA 0x0054
3434 +#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
3435 +#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
3436 #define SSB_CHIPCO_GPIOIN 0x0060
3437 #define SSB_CHIPCO_GPIOOUT 0x0064
3438 #define SSB_CHIPCO_GPIOOUTEN 0x0068
3439 @@ -130,6 +133,9 @@
3440 #define SSB_CHIPCO_GPIOIRQ 0x0074
3441 #define SSB_CHIPCO_WATCHDOG 0x0080
3442 #define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
3443 +#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF
3444 +#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0
3445 +#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000
3446 #define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
3447 #define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
3448 #define SSB_CHIPCO_CLOCK_N 0x0090
3449 @@ -188,8 +194,10 @@
3450 #define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
3451 #define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
3452 #define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
3453 -#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
3454 -#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
3455 +#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
3456 +#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */
3457 +#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
3458 +#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
3459 #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
3460 #define SSB_CHIPCO_UART0_DATA 0x0300
3461 #define SSB_CHIPCO_UART0_IMR 0x0304
3462 @@ -385,6 +393,7 @@
3463
3464
3465 /** Chip specific Chip-Status register contents. */
3466 +#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */
3467 #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
3468 #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
3469 #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
3470 @@ -398,6 +407,18 @@
3471 #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
3472 #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
3473
3474 +/** Macros to determine SPROM presence based on Chip-Status register. */
3475 +#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
3476 + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
3477 + SSB_CHIPCO_CHST_4325_OTP_SEL)
3478 +#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
3479 + (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
3480 +#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
3481 + (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
3482 + SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
3483 + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
3484 + SSB_CHIPCO_CHST_4325_OTP_SEL))
3485 +
3486
3487
3488 /** Clockcontrol masks and values **/
3489 @@ -564,6 +585,7 @@ struct ssb_chipcommon_pmu {
3490 struct ssb_chipcommon {
3491 struct ssb_device *dev;
3492 u32 capabilities;
3493 + u32 status;
3494 /* Fast Powerup Delay constant */
3495 u16 fast_pwrup_delay;
3496 struct ssb_chipcommon_pmu pmu;
3497 @@ -629,5 +651,15 @@ extern int ssb_chipco_serial_init(struct
3498 /* PMU support */
3499 extern void ssb_pmu_init(struct ssb_chipcommon *cc);
3500
3501 +enum ssb_pmu_ldo_volt_id {
3502 + LDO_PAREF = 0,
3503 + LDO_VOLT1,
3504 + LDO_VOLT2,
3505 + LDO_VOLT3,
3506 +};
3507 +
3508 +void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
3509 + enum ssb_pmu_ldo_volt_id id, u32 voltage);
3510 +void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
3511
3512 #endif /* LINUX_SSB_CHIPCO_H_ */
3513 --- a/include/linux/ssb/ssb_regs.h
3514 +++ b/include/linux/ssb/ssb_regs.h
3515 @@ -85,6 +85,8 @@
3516 #define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */
3517 #define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */
3518 #define SSB_IMSTATE_TO 0x00040000 /* Timeout */
3519 +#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */
3520 +#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */
3521 #define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */
3522 #define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
3523 #define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
3524 @@ -95,7 +97,7 @@
3525 #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
3526 #define SSB_TMSLOW 0x0F98 /* SB Target State Low */
3527 #define SSB_TMSLOW_RESET 0x00000001 /* Reset */
3528 -#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
3529 +#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */
3530 #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
3531 #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
3532 #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
3533 @@ -162,7 +164,7 @@
3534
3535 /* SPROM shadow area. If not otherwise noted, fields are
3536 * two bytes wide. Note that the SPROM can _only_ be read
3537 - * in two-byte quantinies.
3538 + * in two-byte quantities.
3539 */
3540 #define SSB_SPROMSIZE_WORDS 64
3541 #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
3542 @@ -170,26 +172,27 @@
3543 #define SSB_SPROMSIZE_WORDS_R4 220
3544 #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
3545 #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
3546 -#define SSB_SPROM_BASE 0x1000
3547 -#define SSB_SPROM_REVISION 0x107E
3548 +#define SSB_SPROM_BASE1 0x1000
3549 +#define SSB_SPROM_BASE31 0x0800
3550 +#define SSB_SPROM_REVISION 0x007E
3551 #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
3552 #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
3553 #define SSB_SPROM_REVISION_CRC_SHIFT 8
3554
3555 /* SPROM Revision 1 */
3556 -#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
3557 -#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
3558 -#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
3559 -#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
3560 -#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
3561 -#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
3562 -#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
3563 +#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */
3564 +#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */
3565 +#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */
3566 +#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */
3567 +#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */
3568 +#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */
3569 +#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */
3570 #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
3571 #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
3572 #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
3573 #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
3574 #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
3575 -#define SSB_SPROM1_BINF 0x105C /* Board info */
3576 +#define SSB_SPROM1_BINF 0x005C /* Board info */
3577 #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
3578 #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
3579 #define SSB_SPROM1_BINF_CCODE_SHIFT 8
3580 @@ -197,63 +200,63 @@
3581 #define SSB_SPROM1_BINF_ANTBG_SHIFT 12
3582 #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
3583 #define SSB_SPROM1_BINF_ANTA_SHIFT 14
3584 -#define SSB_SPROM1_PA0B0 0x105E
3585 -#define SSB_SPROM1_PA0B1 0x1060
3586 -#define SSB_SPROM1_PA0B2 0x1062
3587 -#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
3588 +#define SSB_SPROM1_PA0B0 0x005E
3589 +#define SSB_SPROM1_PA0B1 0x0060
3590 +#define SSB_SPROM1_PA0B2 0x0062
3591 +#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */
3592 #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
3593 #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
3594 #define SSB_SPROM1_GPIOA_P1_SHIFT 8
3595 -#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
3596 +#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */
3597 #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
3598 #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
3599 #define SSB_SPROM1_GPIOB_P3_SHIFT 8
3600 -#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
3601 +#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */
3602 #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
3603 #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
3604 #define SSB_SPROM1_MAXPWR_A_SHIFT 8
3605 -#define SSB_SPROM1_PA1B0 0x106A
3606 -#define SSB_SPROM1_PA1B1 0x106C
3607 -#define SSB_SPROM1_PA1B2 0x106E
3608 -#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
3609 +#define SSB_SPROM1_PA1B0 0x006A
3610 +#define SSB_SPROM1_PA1B1 0x006C
3611 +#define SSB_SPROM1_PA1B2 0x006E
3612 +#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */
3613 #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
3614 #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
3615 #define SSB_SPROM1_ITSSI_A_SHIFT 8
3616 -#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
3617 -#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
3618 +#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */
3619 +#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */
3620 #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
3621 #define SSB_SPROM1_AGAIN_BG_SHIFT 0
3622 #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
3623 #define SSB_SPROM1_AGAIN_A_SHIFT 8
3624
3625 /* SPROM Revision 2 (inherits from rev 1) */
3626 -#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
3627 -#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
3628 +#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
3629 +#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */
3630 #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
3631 #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
3632 #define SSB_SPROM2_MAXP_A_LO_SHIFT 8
3633 -#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
3634 -#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
3635 -#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
3636 -#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
3637 -#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
3638 -#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
3639 -#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
3640 +#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */
3641 +#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */
3642 +#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */
3643 +#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */
3644 +#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */
3645 +#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */
3646 +#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */
3647 #define SSB_SPROM2_OPO_VALUE 0x00FF
3648 #define SSB_SPROM2_OPO_UNUSED 0xFF00
3649 -#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
3650 +#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */
3651
3652 /* SPROM Revision 3 (inherits most data from rev 2) */
3653 -#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
3654 -#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
3655 -#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
3656 -#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
3657 -#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
3658 +#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
3659 +#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
3660 +#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
3661 +#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
3662 #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
3663 #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
3664 #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
3665 #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
3666 -#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
3667 +#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */
3668 +#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */
3669 #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
3670 #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
3671 #define SSB_SPROM3_CCKPO_2M_SHIFT 4
3672 @@ -264,104 +267,200 @@
3673 #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
3674
3675 /* SPROM Revision 4 */
3676 -#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
3677 -#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
3678 +#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
3679 +#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
3680 +#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
3681 +#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */
3682 +#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */
3683 +#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */
3684 +#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */
3685 +#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
3686 +#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
3687 +#define SSB_SPROM4_GPIOA_P1_SHIFT 8
3688 +#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */
3689 +#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
3690 +#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
3691 +#define SSB_SPROM4_GPIOB_P3_SHIFT 8
3692 +#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */
3693 #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
3694 #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
3695 #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
3696 #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
3697 #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
3698 -#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
3699 -#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
3700 -#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
3701 -#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
3702 -#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
3703 -#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
3704 -#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
3705 -#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
3706 +#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
3707 +#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
3708 +#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
3709 +#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
3710 +#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
3711 +#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
3712 #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
3713 #define SSB_SPROM4_AGAIN0_SHIFT 0
3714 #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
3715 #define SSB_SPROM4_AGAIN1_SHIFT 8
3716 -#define SSB_SPROM4_AGAIN23 0x1060
3717 +#define SSB_SPROM4_AGAIN23 0x0060
3718 #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
3719 #define SSB_SPROM4_AGAIN2_SHIFT 0
3720 #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
3721 #define SSB_SPROM4_AGAIN3_SHIFT 8
3722 -#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
3723 -#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
3724 +#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */
3725 +#define SSB_SPROM4_TXPID2G0 0x00FF
3726 +#define SSB_SPROM4_TXPID2G0_SHIFT 0
3727 +#define SSB_SPROM4_TXPID2G1 0xFF00
3728 +#define SSB_SPROM4_TXPID2G1_SHIFT 8
3729 +#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */
3730 +#define SSB_SPROM4_TXPID2G2 0x00FF
3731 +#define SSB_SPROM4_TXPID2G2_SHIFT 0
3732 +#define SSB_SPROM4_TXPID2G3 0xFF00
3733 +#define SSB_SPROM4_TXPID2G3_SHIFT 8
3734 +#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */
3735 +#define SSB_SPROM4_TXPID5G0 0x00FF
3736 +#define SSB_SPROM4_TXPID5G0_SHIFT 0
3737 +#define SSB_SPROM4_TXPID5G1 0xFF00
3738 +#define SSB_SPROM4_TXPID5G1_SHIFT 8
3739 +#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */
3740 +#define SSB_SPROM4_TXPID5G2 0x00FF
3741 +#define SSB_SPROM4_TXPID5G2_SHIFT 0
3742 +#define SSB_SPROM4_TXPID5G3 0xFF00
3743 +#define SSB_SPROM4_TXPID5G3_SHIFT 8
3744 +#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */
3745 +#define SSB_SPROM4_TXPID5GL0 0x00FF
3746 +#define SSB_SPROM4_TXPID5GL0_SHIFT 0
3747 +#define SSB_SPROM4_TXPID5GL1 0xFF00
3748 +#define SSB_SPROM4_TXPID5GL1_SHIFT 8
3749 +#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */
3750 +#define SSB_SPROM4_TXPID5GL2 0x00FF
3751 +#define SSB_SPROM4_TXPID5GL2_SHIFT 0
3752 +#define SSB_SPROM4_TXPID5GL3 0xFF00
3753 +#define SSB_SPROM4_TXPID5GL3_SHIFT 8
3754 +#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */
3755 +#define SSB_SPROM4_TXPID5GH0 0x00FF
3756 +#define SSB_SPROM4_TXPID5GH0_SHIFT 0
3757 +#define SSB_SPROM4_TXPID5GH1 0xFF00
3758 +#define SSB_SPROM4_TXPID5GH1_SHIFT 8
3759 +#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */
3760 +#define SSB_SPROM4_TXPID5GH2 0x00FF
3761 +#define SSB_SPROM4_TXPID5GH2_SHIFT 0
3762 +#define SSB_SPROM4_TXPID5GH3 0xFF00
3763 +#define SSB_SPROM4_TXPID5GH3_SHIFT 8
3764 +#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */
3765 #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
3766 #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
3767 #define SSB_SPROM4_ITSSI_BG_SHIFT 8
3768 -#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
3769 +#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */
3770 #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
3771 #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
3772 #define SSB_SPROM4_ITSSI_A_SHIFT 8
3773 -#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
3774 -#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
3775 -#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
3776 -#define SSB_SPROM4_GPIOA_P1_SHIFT 8
3777 -#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
3778 -#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
3779 -#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
3780 -#define SSB_SPROM4_GPIOB_P3_SHIFT 8
3781 -#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
3782 -#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
3783 -#define SSB_SPROM4_PA0B2 0x1086
3784 -#define SSB_SPROM4_PA1B0 0x108E
3785 -#define SSB_SPROM4_PA1B1 0x1090
3786 -#define SSB_SPROM4_PA1B2 0x1092
3787 +#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */
3788 +#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */
3789 +#define SSB_SPROM4_PA0B2 0x0086
3790 +#define SSB_SPROM4_PA1B0 0x008E
3791 +#define SSB_SPROM4_PA1B1 0x0090
3792 +#define SSB_SPROM4_PA1B2 0x0092
3793
3794 /* SPROM Revision 5 (inherits most data from rev 4) */
3795 -#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */
3796 -#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */
3797 -#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */
3798 -#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */
3799 -#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */
3800 +#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */
3801 +#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */
3802 +#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */
3803 +#define SSB_SPROM5_BFL2LO 0x004E /* Board flags 2 (low 16 bits) */
3804 +#define SSB_SPROM5_BFL2HI 0x0050 /* Board flags 2 Hi */
3805 +#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
3806 +#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
3807 #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
3808 #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */
3809 #define SSB_SPROM5_GPIOA_P1_SHIFT 8
3810 -#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */
3811 +#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */
3812 #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */
3813 #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */
3814 #define SSB_SPROM5_GPIOB_P3_SHIFT 8
3815
3816 /* SPROM Revision 8 */
3817 -#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */
3818 -#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */
3819 -#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
3820 -#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
3821 -#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
3822 -#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
3823 -#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
3824 -#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
3825 -#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
3826 -#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */
3827 +#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */
3828 +#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */
3829 +#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */
3830 +#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */
3831 +#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */
3832 +#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */
3833 +#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */
3834 +#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */
3835 +#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
3836 +#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
3837 +#define SSB_SPROM8_GPIOA_P1_SHIFT 8
3838 +#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */
3839 +#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
3840 +#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
3841 +#define SSB_SPROM8_GPIOB_P3_SHIFT 8
3842 +#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
3843 +#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
3844 +#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
3845 +#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
3846 +#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
3847 +#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */
3848 #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */
3849 #define SSB_SPROM8_AGAIN0_SHIFT 0
3850 #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */
3851 #define SSB_SPROM8_AGAIN1_SHIFT 8
3852 -#define SSB_SPROM8_AGAIN23 0x10A0
3853 +#define SSB_SPROM8_AGAIN23 0x00A0
3854 #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */
3855 #define SSB_SPROM8_AGAIN2_SHIFT 0
3856 #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
3857 #define SSB_SPROM8_AGAIN3_SHIFT 8
3858 -#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */
3859 -#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
3860 -#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
3861 -#define SSB_SPROM8_GPIOA_P1_SHIFT 8
3862 -#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */
3863 -#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
3864 -#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
3865 -#define SSB_SPROM8_GPIOB_P3_SHIFT 8
3866 -#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */
3867 -#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
3868 +#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
3869 +#define SSB_SPROM8_RSSISMF2G 0x000F
3870 +#define SSB_SPROM8_RSSISMC2G 0x00F0
3871 +#define SSB_SPROM8_RSSISMC2G_SHIFT 4
3872 +#define SSB_SPROM8_RSSISAV2G 0x0700
3873 +#define SSB_SPROM8_RSSISAV2G_SHIFT 8
3874 +#define SSB_SPROM8_BXA2G 0x1800
3875 +#define SSB_SPROM8_BXA2G_SHIFT 11
3876 +#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */
3877 +#define SSB_SPROM8_RSSISMF5G 0x000F
3878 +#define SSB_SPROM8_RSSISMC5G 0x00F0
3879 +#define SSB_SPROM8_RSSISMC5G_SHIFT 4
3880 +#define SSB_SPROM8_RSSISAV5G 0x0700
3881 +#define SSB_SPROM8_RSSISAV5G_SHIFT 8
3882 +#define SSB_SPROM8_BXA5G 0x1800
3883 +#define SSB_SPROM8_BXA5G_SHIFT 11
3884 +#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */
3885 +#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
3886 +#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
3887 +#define SSB_SPROM8_TRI5G_SHIFT 8
3888 +#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */
3889 +#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
3890 +#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
3891 +#define SSB_SPROM8_TRI5GH_SHIFT 8
3892 +#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
3893 +#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
3894 +#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
3895 +#define SSB_SPROM8_RXPO5G_SHIFT 8
3896 +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
3897 +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
3898 #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
3899 #define SSB_SPROM8_ITSSI_BG_SHIFT 8
3900 -#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */
3901 -#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
3902 +#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */
3903 +#define SSB_SPROM8_PA0B1 0x00C4
3904 +#define SSB_SPROM8_PA0B2 0x00C6
3905 +#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */
3906 +#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
3907 #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
3908 #define SSB_SPROM8_ITSSI_A_SHIFT 8
3909 +#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */
3910 +#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
3911 +#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
3912 +#define SSB_SPROM8_MAXP_AL_SHIFT 8
3913 +#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */
3914 +#define SSB_SPROM8_PA1B1 0x00CE
3915 +#define SSB_SPROM8_PA1B2 0x00D0
3916 +#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */
3917 +#define SSB_SPROM8_PA1LOB1 0x00D4
3918 +#define SSB_SPROM8_PA1LOB2 0x00D6
3919 +#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
3920 +#define SSB_SPROM8_PA1HIB1 0x00DA
3921 +#define SSB_SPROM8_PA1HIB2 0x00DC
3922 +#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
3923 +#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
3924 +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
3925 +#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
3926 +#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
3927
3928 /* Values for SSB_SPROM1_BINF_CCODE */
3929 enum {
Personal OpenWRT clone
This page took 0.199243 seconds and 5 git commands to generate.