brcm47xx: add support for kernel 2.6.33
[openwrt.git] / target / linux / ifxmips / files / arch / mips / pci / pci-ifxmips.c
1 #include <linux/types.h>
2 #include <linux/pci.h>
3 #include <linux/kernel.h>
4 #include <linux/init.h>
5 #include <linux/delay.h>
6 #include <linux/mm.h>
7 #include <asm/addrspace.h>
8 #include <linux/vmalloc.h>
9 #include <ifxmips.h>
10 #include <ifxmips_irq.h>
11 #include <ifxmips_cgu.h>
12
13 #define IFXMIPS_PCI_MEM_BASE 0x18000000
14 #define IFXMIPS_PCI_MEM_SIZE 0x02000000
15 #define IFXMIPS_PCI_IO_BASE 0x1AE00000
16 #define IFXMIPS_PCI_IO_SIZE 0x00200000
17
18 extern int ifxmips_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
19 extern int ifxmips_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
20
21 struct pci_ops ifxmips_pci_ops =
22 {
23 .read = ifxmips_pci_read_config_dword,
24 .write = ifxmips_pci_write_config_dword
25 };
26
27 static struct resource pci_io_resource =
28 {
29 .name = "io pci IO space",
30 .start = IFXMIPS_PCI_IO_BASE,
31 .end = IFXMIPS_PCI_IO_BASE + IFXMIPS_PCI_IO_SIZE - 1,
32 .flags = IORESOURCE_IO
33 };
34
35 static struct resource pci_mem_resource =
36 {
37 .name = "ext pci memory space",
38 .start = IFXMIPS_PCI_MEM_BASE,
39 .end = IFXMIPS_PCI_MEM_BASE + IFXMIPS_PCI_MEM_SIZE - 1,
40 .flags = IORESOURCE_MEM
41 };
42
43 static struct pci_controller ifxmips_pci_controller =
44 {
45 .pci_ops = &ifxmips_pci_ops,
46 .mem_resource = &pci_mem_resource,
47 .mem_offset = 0x00000000UL,
48 .io_resource = &pci_io_resource,
49 .io_offset = 0x00000000UL,
50 };
51
52 /* the cpu can can generate the 33Mhz or rely on an external clock the cgu needs the
53 proper setting, otherwise the cpu hangs. we have no way of runtime detecting this */
54 u32 ifxmips_pci_mapped_cfg;
55 int ifxmips_pci_external_clock = 0;
56
57 static int __init
58 ifxmips_pci_set_external_clk(char *str)
59 {
60 printk("cgu: setting up external pci clock\n");
61 ifxmips_pci_external_clock = 1;
62 return 1;
63 }
64 __setup("pci_external_clk", ifxmips_pci_set_external_clk);
65
66 int
67 pcibios_plat_dev_init(struct pci_dev *dev)
68 {
69 u8 pin;
70
71 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
72 switch(pin)
73 {
74 case 0:
75 break;
76 case 1:
77 //falling edge level triggered:0x4, low level:0xc, rising edge:0x2
78 ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_CON) | 0xc, IFXMIPS_EBU_PCC_CON);
79 ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_IEN) | 0x10, IFXMIPS_EBU_PCC_IEN);
80 break;
81 case 2:
82 case 3:
83 case 4:
84 printk ("WARNING: interrupt pin %d not supported yet!\n", pin);
85 default:
86 printk ("WARNING: invalid interrupt pin %d\n", pin);
87 return 1;
88 }
89 return 0;
90 }
91
92 static void __init
93 ifxmips_pci_startup(void)
94 {
95 u32 temp_buffer;
96
97 cgu_setup_pci_clk(ifxmips_pci_external_clock);
98
99 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
100 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OD) | (1 << 5), IFXMIPS_GPIO_P1_OD);
101 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | (1 << 5), IFXMIPS_GPIO_P1_DIR);
102 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL1);
103 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL0);
104 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) & ~0x2000, IFXMIPS_GPIO_P1_DIR);
105 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | 0x4000, IFXMIPS_GPIO_P1_DIR);
106 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~0x6000, IFXMIPS_GPIO_P1_ALTSEL1);
107 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) | 0x6000, IFXMIPS_GPIO_P1_ALTSEL0);
108 /* enable auto-switching between PCI and EBU */
109 ifxmips_w32(0xa, PCI_CR_CLK_CTRL);
110 /* busy, i.e. configuration is not done, PCI access has to be retried */
111 ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
112 wmb ();
113 /* BUS Master/IO/MEM access */
114 ifxmips_w32(ifxmips_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
115
116 /* enable external 2 PCI masters */
117 temp_buffer = ifxmips_r32(PCI_CR_PC_ARB);
118 temp_buffer &= (~(0xf << 16));
119 /* enable internal arbiter */
120 temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
121 /* enable internal PCI master reqest */
122 temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
123
124 /* enable EBU reqest */
125 temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
126
127 /* enable all external masters request */
128 temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
129 ifxmips_w32(temp_buffer, PCI_CR_PC_ARB);
130 wmb ();
131
132 ifxmips_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
133 ifxmips_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
134 ifxmips_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
135 ifxmips_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
136 ifxmips_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
137 ifxmips_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
138 ifxmips_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
139 ifxmips_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
140 ifxmips_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
141 ifxmips_w32(0x0e000008, PCI_CR_BAR11MASK);
142 ifxmips_w32(0, PCI_CR_PCI_ADDR_MAP11);
143 ifxmips_w32(0, PCI_CS_BASE_ADDR1);
144 #ifdef CONFIG_SWAP_IO_SPACE
145 /* both TX and RX endian swap are enabled */
146 ifxmips_w32(ifxmips_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
147 wmb ();
148 #endif
149 /*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
150 ifxmips_w32(ifxmips_r32(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
151 ifxmips_w32(ifxmips_r32(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
152 /*use 8 dw burst length */
153 ifxmips_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
154 ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
155 wmb();
156 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) & ~(1 << 5), IFXMIPS_GPIO_P1_OUT);
157 wmb();
158 mdelay(1);
159 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
160 }
161
162 int __init
163 pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
164 switch(slot)
165 {
166 case 13:
167 /* IDSEL = AD29 --> USB Host Controller */
168 return (INT_NUM_IM1_IRL0 + 17);
169 case 14:
170 /* IDSEL = AD30 --> mini PCI connector */
171 return (INT_NUM_IM0_IRL0 + 22);
172 default:
173 printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
174 return 0;
175 }
176 }
177
178 int __init
179 pcibios_init(void)
180 {
181 extern int pci_probe_only;
182
183 pci_probe_only = 0;
184 printk("PCI: Probing PCI hardware on host bus 0.\n");
185 ifxmips_pci_startup ();
186 ifxmips_pci_mapped_cfg = (u32)ioremap_nocache(0x17000000, 0x800 * 16);
187 printk("IFXMips PCI mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_mapped_cfg);
188 ifxmips_pci_controller.io_map_base = (unsigned long)ioremap(IFXMIPS_PCI_IO_BASE, IFXMIPS_PCI_IO_SIZE - 1);
189 printk("IFXMips PCI I/O mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_controller.io_map_base);
190 register_pci_controller(&ifxmips_pci_controller);
191 return 0;
192 }
193
194 arch_initcall(pcibios_init);
This page took 0.058284 seconds and 5 git commands to generate.