remove polarity from config file generation
[openwrt.git] / package / madwifi / patches / 200-no_debug.patch
1 --- a/ath/if_ath.c
2 +++ b/ath/if_ath.c
3 @@ -42,7 +42,6 @@
4 * This software is derived from work of Atsushi Onoe; his contribution
5 * is greatly appreciated.
6 */
7 -#define AR_DEBUG
8 #include "if_ath_debug.h"
9 #include "opt_ah.h"
10
11 @@ -368,8 +367,10 @@
12 static void ath_set_dfs_cac_time(struct ieee80211com *, unsigned int seconds);
13
14 static unsigned int ath_test_radar(struct ieee80211com *);
15 -static unsigned int ath_dump_hal_map(struct ieee80211com *ic);
16 +#ifdef AR_DEBUG
17
18 +static unsigned int ath_dump_hal_map(struct ieee80211com *ic);
19 +#endif
20 static u_int32_t ath_get_clamped_maxtxpower(struct ath_softc *sc);
21 static u_int32_t ath_set_clamped_maxtxpower(struct ath_softc *sc,
22 u_int32_t new_clamped_maxtxpower);
23 @@ -520,9 +521,11 @@
24 u_int8_t csz;
25
26 sc->devid = devid;
27 +#ifdef AR_DEBUG
28 ath_debug_global = (ath_debug & ATH_DEBUG_GLOBAL);
29 sc->sc_debug = (ath_debug & ~ATH_DEBUG_GLOBAL);
30 DPRINTF(sc, ATH_DEBUG_ANY, "%s: devid 0x%x\n", __func__, devid);
31 +#endif
32
33 /* Allocate space for dynamically determined maximum VAP count */
34 sc->sc_bslot =
35 @@ -1038,8 +1041,9 @@
36 ic->ic_vap_delete = ath_vap_delete;
37
38 ic->ic_test_radar = ath_test_radar;
39 +#ifdef AR_DEBUG
40 ic->ic_dump_hal_map = ath_dump_hal_map;
41 -
42 +#endif
43 ic->ic_set_dfs_testmode = ath_set_dfs_testmode;
44 ic->ic_get_dfs_testmode = ath_get_dfs_testmode;
45
46 @@ -1297,12 +1301,14 @@
47 /* If no default VAP debug flags are passed, allow a few to
48 * transfer down from the driver to new VAPs so we can have load
49 * time debugging for VAPs too. */
50 +#ifdef AR_DEBUG
51 vap->iv_debug = 0 |
52 ((sc->sc_debug & ATH_DEBUG_RATE) ? IEEE80211_MSG_XRATE : 0) |
53 ((sc->sc_debug & ATH_DEBUG_XMIT) ? IEEE80211_MSG_OUTPUT : 0) |
54 ((sc->sc_debug & ATH_DEBUG_RECV) ? IEEE80211_MSG_INPUT : 0) |
55 0
56 ;
57 +#endif
58 }
59 ic->ic_debug = (sc->sc_default_ieee80211_debug & IEEE80211_MSG_IC);
60
61 @@ -10496,9 +10502,11 @@
62 /* XXX validate? */
63 sc->sc_ledpin = val;
64 break;
65 +#ifdef AR_DEBUG
66 case ATH_DEBUG:
67 sc->sc_debug = (val & ~ATH_DEBUG_GLOBAL);
68 ath_debug_global = (val & ATH_DEBUG_GLOBAL);
69 +#endif
70 break;
71 case ATH_TXANTENNA:
72 /*
73 @@ -10918,9 +10926,11 @@
74 }
75
76 /* initialize values */
77 +#ifdef AR_DEBUG
78 ath_debug_global = (ath_debug & ATH_DEBUG_GLOBAL);
79 sc->sc_debug = (ath_debug & ~ATH_DEBUG_GLOBAL);
80 sc->sc_default_ieee80211_debug = ieee80211_debug;
81 +#endif
82 sc->sc_txantenna = 0; /* default to auto-selection */
83 sc->sc_txintrperiod = ATH_TXQ_INTR_PERIOD;
84 }
85 @@ -11762,6 +11772,7 @@
86 }
87
88 /* This is called by a private ioctl (iwpriv) to dump the HAL obfuscation table */
89 +#ifdef AR_DEBUG
90 static unsigned int
91 ath_dump_hal_map(struct ieee80211com *ic)
92 {
93 @@ -11770,7 +11781,7 @@
94 ath_hal_dump_map(sc->sc_ah);
95 return 0;
96 }
97 -
98 +#endif
99 /* If we are shutting down or blowing off the DFS channel availability check
100 * then we call this to stop the behavior before we take the rest of the
101 * necessary actions (such as a DFS reaction to radar). */
102 --- a/ath_rate/amrr/amrr.c
103 +++ b/ath_rate/amrr/amrr.c
104 @@ -70,7 +70,9 @@
105
106 #include "amrr.h"
107
108 +#ifdef AR_DEBUG
109 #define AMRR_DEBUG
110 +#endif
111 #ifdef AMRR_DEBUG
112 #define DPRINTF(sc, _fmt, ...) do { \
113 if (sc->sc_debug & 0x10) \
114 --- a/ath_rate/minstrel/minstrel.c
115 +++ b/ath_rate/minstrel/minstrel.c
116 @@ -117,7 +117,9 @@
117
118 #include "minstrel.h"
119
120 +#ifdef AR_DEBUG
121 #define MINSTREL_DEBUG
122 +#endif
123 #ifdef MINSTREL_DEBUG
124 enum {
125 ATH_DEBUG_RATE = 0x00000010 /* rate control */
126 --- a/ath_rate/onoe/onoe.c
127 +++ b/ath_rate/onoe/onoe.c
128 @@ -66,7 +66,9 @@
129
130 #include "onoe.h"
131
132 +#ifdef AR_DEBUG
133 #define ONOE_DEBUG
134 +#endif
135 #ifdef ONOE_DEBUG
136 enum {
137 ATH_DEBUG_RATE = 0x00000010, /* rate control */
138 --- a/ath_rate/sample/sample.c
139 +++ b/ath_rate/sample/sample.c
140 @@ -68,7 +68,9 @@
141
142 #include "sample.h"
143
144 -#define SAMPLE_DEBUG
145 +#ifdef AR_DEBUG
146 +#define SAMPLE_DEBUG
147 +#endif
148 #ifdef SAMPLE_DEBUG
149 enum {
150 ATH_DEBUG_RATE = 0x00000010, /* rate control */
151 --- a/tools/do_multi.c
152 +++ b/tools/do_multi.c
153 @@ -10,16 +10,20 @@
154
155 progname = basename(argv[0]);
156
157 +#ifdef AR_DEBUG
158 if(strcmp(progname, "80211debug") == 0)
159 ret = a80211debug_init(argc, argv);
160 +#endif
161 if(strcmp(progname, "80211stats") == 0)
162 ret = a80211stats_init(argc, argv);
163 if(strcmp(progname, "athchans") == 0)
164 ret = athchans_init(argc, argv);
165 if(strcmp(progname, "athctrl") == 0)
166 ret = athctrl_init(argc, argv);
167 +#ifdef AR_DEBUG
168 if(strcmp(progname, "athdebug") == 0)
169 ret = athdebug_init(argc, argv);
170 +#endif
171 if(strcmp(progname, "athkey") == 0)
172 ret = athkey_init(argc, argv);
173 if(strcmp(progname, "athstats") == 0)
174 --- a/tools/Makefile
175 +++ b/tools/Makefile
176 @@ -48,6 +48,8 @@
177
178 all: compile
179
180 +DEBUG = -DAR_DEBUG
181 +
182 ALLPROGS= athstats 80211stats athkey athchans athctrl \
183 athdebug 80211debug wlanconfig ath_info
184
185 @@ -55,7 +57,7 @@
186
187 INCS= -I. -I../ath -I$(HAL) -I$(TOP) -I$(ATH_HAL)
188 CFLAGS= -g -O2 -Wall
189 -ALL_CFLAGS= $(CFLAGS) $(INCS)
190 +ALL_CFLAGS= $(CFLAGS) $(INCS) $(DEBUG)
191 LDFLAGS=
192
193
194 --- a/net80211/ieee80211_linux.h
195 +++ b/net80211/ieee80211_linux.h
196 @@ -29,8 +29,6 @@
197 #ifndef _NET80211_IEEE80211_LINUX_H_
198 #define _NET80211_IEEE80211_LINUX_H_
199
200 -#define IEEE80211_DEBUG
201 -#define IEEE80211_DEBUG_REFCNT /* Node reference count debugging */
202 /* #define ATH_DEBUG_SPINLOCKS */ /* announce before spinlocking */
203
204 #include <linux/wireless.h>
205 --- a/Makefile.inc
206 +++ b/Makefile.inc
207 @@ -148,7 +148,8 @@
208 TOOLS= $(TOP)/tools
209
210 WARNINGS = -Werror
211 -COPTS+= $(WARNINGS)
212 +DEBUG = -DAR_DEBUG -DIEEE80211_DEBUG
213 +COPTS+= $(WARNINGS) $(DEBUG)
214 INCS= -include $(TOP)/include/compat.h -I$(TOP)/include
215
216 # TARGET defines the target platform architecture. It must match one of
217 --- a/ath/if_ath_radar.c
218 +++ b/ath/if_ath_radar.c
219 @@ -19,8 +19,6 @@
220 * $Id: if_ath_radar.c 2464 2007-06-15 22:51:56Z mtaylor $
221 */
222 #include "opt_ah.h"
223 -
224 -#define AR_DEBUG
225 #include "if_ath_debug.h"
226
227 #ifndef AUTOCONF_INCLUDED
228 @@ -56,8 +54,6 @@
229 #include <net80211/if_llc.h>
230 #endif
231
232 -#define AR_DEBUG
233 -
234 #include "net80211/if_athproto.h"
235 #include "if_athvar.h"
236
237 --- a/ath/if_ath_hal.h
238 +++ b/ath/if_ath_hal.h
239 @@ -1081,6 +1081,7 @@
240
241 tail -f /var/log/messages | sed -f hal_unmangle.sed
242 */
243 +#ifdef AR_DEBUG
244 static inline void ath_hal_dump_map(struct ath_hal *ah)
245 {
246 #ifdef CONFIG_KALLSYMS
247 @@ -1345,7 +1346,7 @@
248 #endif /* #ifndef CONFIG_KALLSYMS */
249
250 }
251 -
252 +#endif
253 #include "if_ath_hal_wrappers.h"
254
255 #endif /* #ifndef _IF_ATH_HAL_H_ */
256 --- a/net80211/ieee80211_var.h
257 +++ b/net80211/ieee80211_var.h
258 @@ -492,9 +492,10 @@
259 /* inject a fake radar signal -- used while on a 802.11h DFS channels */
260 unsigned int (*ic_test_radar)(struct ieee80211com *);
261
262 +#ifdef AR_DEBUG
263 /* dump HAL */
264 unsigned int (*ic_dump_hal_map)(struct ieee80211com *);
265 -
266 +#endif
267 /* DFS channel availability check time (in seconds) */
268 void (*ic_set_dfs_cac_time)(struct ieee80211com *, unsigned int);
269 unsigned int (*ic_get_dfs_cac_time)(struct ieee80211com *);
270 --- a/net80211/ieee80211_wireless.c
271 +++ b/net80211/ieee80211_wireless.c
272 @@ -1548,6 +1548,7 @@
273 return 0;
274 }
275
276 +#ifdef AR_DEBUG
277 static int
278 ieee80211_ioctl_hal_map(struct net_device *dev, struct iw_request_info *info,
279 void *w, char *extra)
280 @@ -1558,7 +1559,7 @@
281 params[0] = ic->ic_dump_hal_map(ic);
282 return 0;
283 }
284 -
285 +#endif
286
287 static int
288 ieee80211_ioctl_radar(struct net_device *dev, struct iw_request_info *info,
289 @@ -5258,8 +5259,10 @@
290 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwmmparams" },
291 { IEEE80211_IOCTL_RADAR,
292 0, 0, "doth_radar" },
293 +#ifdef AR_DEBUG
294 { IEEE80211_IOCTL_HALMAP,
295 0, 0, "dump_hal_map" },
296 +#endif
297 /*
298 * These depends on sub-ioctl support which added in version 12.
299 */
300 @@ -5695,7 +5698,9 @@
301 set_priv(IEEE80211_IOCTL_SETMLME, ieee80211_ioctl_setmlme),
302 set_priv(IEEE80211_IOCTL_SETKEY, ieee80211_ioctl_setkey),
303 set_priv(IEEE80211_IOCTL_DELKEY, ieee80211_ioctl_delkey),
304 +#ifdef AR_DEBUG
305 set_priv(IEEE80211_IOCTL_HALMAP, ieee80211_ioctl_hal_map),
306 +#endif
307 set_priv(IEEE80211_IOCTL_ADDMAC, ieee80211_ioctl_addmac),
308 set_priv(IEEE80211_IOCTL_DELMAC, ieee80211_ioctl_delmac),
309 set_priv(IEEE80211_IOCTL_WDSADDMAC, ieee80211_ioctl_wdsmac),
310 --- a/ath/if_ath_debug.h
311 +++ b/ath/if_ath_debug.h
312 @@ -54,6 +54,10 @@
313 ATH_DEBUG_GLOBAL = (ATH_DEBUG_SKB|ATH_DEBUG_SKB_REF)
314 };
315
316 +#define EPRINTF(_sc, _fmt, ...) \
317 + printk(KERN_ERR "%s: %s: " _fmt, \
318 + SC_DEV_NAME(_sc), __func__, ## __VA_ARGS__)
319 +
320 #ifdef AR_DEBUG
321
322 /* DEBUG-ONLY DEFINITIONS */
323 @@ -68,20 +72,9 @@
324 ath_keyprint((_sc), __func__, _ix, _hk, _mac); \
325 } while (0)
326
327 -#else /* #ifdef AR_DEBUG */
328 -
329 -#define DFLAG_ISSET(sc, _m) 0
330 -#define DPRINTF(sc, _m, _fmt, ...)
331 -#define KEYPRINTF(sc, k, ix, mac)
332 -
333 -#endif /* #ifdef AR_DEBUG */
334
335 #define IFF_DUMPPKTS(_sc, _m) DFLAG_ISSET((_sc), (_m))
336
337 -#define EPRINTF(_sc, _fmt, ...) \
338 - printk(KERN_ERR "%s: %s: " _fmt, \
339 - SC_DEV_NAME(_sc), __func__, ## __VA_ARGS__)
340 -
341 #define WPRINTF(_sc, _fmt, ...) \
342 printk(KERN_WARNING "%s: %s: " _fmt, \
343 SC_DEV_NAME(_sc), __func__, ## __VA_ARGS__)
344 @@ -89,5 +82,14 @@
345 #define IPRINTF(_sc, _fmt, ...) \
346 printk(KERN_INFO "%s: %s: " _fmt, \
347 SC_DEV_NAME(_sc), __func__, ## __VA_ARGS__)
348 +#else
349 +#define DFLAG_ISSET(sc, _m) 0
350 +#define DPRINTF(sc, _m, _fmt, ...)
351 +#define KEYPRINTF(sc, k, ix, mac)
352 +#define WPRINTF(...)
353 +#define IPRINTF(...)
354 +#define IFF_DUMPPKTS(...) 0
355 +
356 +#endif
357
358 #endif /* #ifndef _IF_ATH_DEBUG_H_ */
359 --- a/net80211/ieee80211_node.c
360 +++ b/net80211/ieee80211_node.c
361 @@ -920,6 +920,9 @@
362 ni->ni_rxkeyoff = 0;
363 }
364
365 +#ifndef IEEE80211_DEBUG
366 +#define node_print_message(...) do {} while(0)
367 +#else
368 static void node_print_message(
369 u_int32_t flags,
370 int show_counter,
371 @@ -972,7 +975,7 @@
372 adjusted_refcount);
373 va_end(args);
374 }
375 -EXPORT_SYMBOL(node_print_message);
376 +#endif
377
378 static void
379 #ifdef IEEE80211_DEBUG_REFCNT
380 --- a/ath/if_ath_pci.c
381 +++ b/ath/if_ath_pci.c
382 @@ -134,8 +134,10 @@
383 u16 vdevice;
384 int i;
385
386 - if (pci_enable_device(pdev))
387 + if (pci_enable_device(pdev)) {
388 + printk(KERN_ERR "%s: failed to enable PCI device\n", dev_info);
389 return -EIO;
390 + }
391
392 /* XXX 32-bit addressing only */
393 if (pci_set_dma_mask(pdev, 0xffffffff)) {
394 @@ -244,8 +246,10 @@
395 sc->aps_sc.sc_ledpin = 1;
396 }
397
398 - if (ath_attach(vdevice, dev, NULL) != 0)
399 + if ((i = ath_attach(vdevice, dev, NULL)) != 0) {
400 + printk(KERN_ERR "%s: ath_attach failed: %d\n", dev_info, i);
401 goto bad4;
402 + }
403
404 athname = ath_hal_probe(id->vendor, vdevice);
405 printk(KERN_INFO "%s: %s: %s: mem=0x%lx, irq=%d\n",
This page took 0.061619 seconds and 5 git commands to generate.