target/linux/generic-2.6/patches-2.6.23/210-mac80211_include_wireless_dev.patch

   1 --- a/include/linux/ieee80211.h
   2 +++ b/include/linux/ieee80211.h
   3 @@ -106,6 +106,75 @@ struct ieee80211_hdr {
   4  } __attribute__ ((packed));
   5
   6
   7 +struct ieee80211_ht_capability {
   8 +       __le16 capabilities_info;
   9 +       u8 mac_ht_params_info;
  10 +       u8 supported_mcs_set[16];
  11 +       __le16 extended_ht_capability_info;
  12 +       __le32 tx_BF_capability_info;
  13 +       u8 antenna_selection_info;
  14 +}__attribute__ ((packed));
  15 +
  16 +struct ieee80211_ht_additional_info {
  17 +       u8 control_chan;
  18 +       u8 ht_param;
  19 +       __le16 operation_mode;
  20 +       __le16 stbc_param;
  21 +       u8 basic_set[16];
  22 +}__attribute__ ((packed));
  23 +
  24 +
  25 +#define IEEE80211_TSINFO_TYPE(a)       ((a.byte1 & 0x01) >> 0)
  26 +#define IEEE80211_TSINFO_TSID(a)       ((a.byte1 & 0x1E) >> 1)
  27 +#define IEEE80211_TSINFO_DIR(a)                ((a.byte1 & 0x60) >> 5)
  28 +#define IEEE80211_TSINFO_POLICY(a)     ((a.byte1 & 0x80) >> 7 + \
  29 +                                        (a.byte2 & 0x01) << 1)
  30 +#define IEEE80211_TSINFO_AGG(a)                ((a.byte2 & 0x02) >> 1)
  31 +#define IEEE80211_TSINFO_APSD(a)       ((a.byte2 & 0x04) >> 2)
  32 +#define IEEE80211_TSINFO_UP(a)         ((a.byte2 & 0x38) >> 3)
  33 +#define IEEE80211_TSINFO_ACK(a)                ((a.byte2 & 0xC0) >> 6)
  34 +#define IEEE80211_TSINFO_SCHEDULE(a)   ((a.byte3 & 0x01) >> 0)
  35 +
  36 +#define IEEE80211_SET_TSINFO_TYPE(i, d)                (i.byte1 |= (d << 0) & 0x01)
  37 +#define IEEE80211_SET_TSINFO_TSID(i, d)                (i.byte1 |= (d << 1) & 0x1E)
  38 +#define IEEE80211_SET_TSINFO_DIR(i, d)         (i.byte1 |= (d << 5) & 0x60)
  39 +#define IEEE80211_SET_TSINFO_POLICY(i, d)      \
  40 +do {                                           \
  41 +                                               i.byte1 |= (d & 0x01) << 7; \
  42 +                                               i.byte2 |= (d & 0x02) >> 1; \
  43 +} while(0)
  44 +#define IEEE80211_SET_TSINFO_AGG(i, d)         (i.byte2 |= (d << 1) & 0x02)
  45 +#define IEEE80211_SET_TSINFO_APSD(i, d)                (i.byte2 |= (d << 2) & 0x04)
  46 +#define IEEE80211_SET_TSINFO_UP(i, d)          (i.byte2 |= (d << 3) & 0x38)
  47 +#define IEEE80211_SET_TSINFO_ACK(i, d)         (i.byte2 |= (d << 6) & 0xC0)
  48 +#define IEEE80211_SET_TSINFO_SCHEDULE(i, d)    (i.byte3 |= (d << 0) & 0x01)
  49 +
  50 +struct ieee80211_ts_info {
  51 +       u8 byte1;
  52 +       u8 byte2;
  53 +       u8 byte3;
  54 +} __attribute__ ((packed));
  55 +
  56 +struct ieee80211_elem_tspec {
  57 +       struct ieee80211_ts_info ts_info;
  58 +       __le16 nominal_msdu_size;
  59 +       __le16 max_msdu_size;
  60 +       __le32 min_service_interval;
  61 +       __le32 max_service_interval;
  62 +       __le32 inactivity_interval;
  63 +       __le32 suspension_interval;
  64 +       __le32 service_start_time;
  65 +       __le32 min_data_rate;
  66 +       __le32 mean_data_rate;
  67 +       __le32 peak_data_rate;
  68 +       __le32 burst_size;
  69 +       __le32 delay_bound;
  70 +       __le32 min_phy_rate;
  71 +       __le16 surplus_band_allow;
  72 +       __le16 medium_time;
  73 +} __attribute__ ((packed));
  74 +
  75 +
  76  struct ieee80211_mgmt {
  77         __le16 frame_control;
  78         __le16 duration;
  79 @@ -173,9 +242,51 @@ struct ieee80211_mgmt {
  80                                 struct {
  81                                         u8 action_code;
  82                                         u8 dialog_token;
  83 +                                       u8 variable[0];
  84 +                               } __attribute__ ((packed)) addts_req;
  85 +                               struct {
  86 +                                       u8 action_code;
  87 +                                       u8 dialog_token;
  88 +                                       __le16 status_code;
  89 +                                       u8 variable[0];
  90 +                               } __attribute__ ((packed)) addts_resp;
  91 +                               struct {
  92 +                                       u8 action_code;
  93 +                                       struct ieee80211_ts_info ts_info;
  94 +                                       __le16 reason_code;
  95 +                               } __attribute__ ((packed)) delts;
  96 +                               struct {
  97 +                                       u8 action_code;
  98 +                                       u8 dialog_token;
  99                                         u8 status_code;
 100                                         u8 variable[0];
 101                                 } __attribute__ ((packed)) wme_action;
 102 +                               struct {
 103 +                                       u8 action_code;
 104 +                                       u8 dest[6];
 105 +                                       u8 src[6];
 106 +                                       __le16 capab_info;
 107 +                                       __le16 timeout;
 108 +                                       /* Followed by Supported Rates and
 109 +                                        * Extended Supported Rates */
 110 +                                       u8 variable[0];
 111 +                               } __attribute__ ((packed)) dls_req;
 112 +                               struct {
 113 +                                       u8 action_code;
 114 +                                       __le16 status_code;
 115 +                                       u8 dest[6];
 116 +                                       u8 src[6];
 117 +                                       /* Followed by Capability Information,
 118 +                                        * Supported Rates and Extended
 119 +                                        * Supported Rates */
 120 +                                       u8 variable[0];
 121 +                               } __attribute__ ((packed)) dls_resp;
 122 +                               struct {
 123 +                                       u8 action_code;
 124 +                                       u8 dest[6];
 125 +                                       u8 src[6];
 126 +                                       __le16 reason_code;
 127 +                               } __attribute__ ((packed)) dls_teardown;
 128                                 struct{
 129                                         u8 action_code;
 130                                         u8 element_id;
 131 @@ -184,6 +295,25 @@ struct ieee80211_mgmt {
 132                                         u8 new_chan;
 133                                         u8 switch_count;
 134                                 } __attribute__((packed)) chan_switch;
 135 +                               struct{
 136 +                                       u8 action_code;
 137 +                                       u8 dialog_token;
 138 +                                       __le16 capab;
 139 +                                       __le16 timeout;
 140 +                                       __le16 start_seq_num;
 141 +                               } __attribute__((packed)) addba_req;
 142 +                               struct{
 143 +                                       u8 action_code;
 144 +                                       u8 dialog_token;
 145 +                                       __le16 status;
 146 +                                       __le16 capab;
 147 +                                       __le16 timeout;
 148 +                               } __attribute__((packed)) addba_resp;
 149 +                               struct{
 150 +                                       u8 action_code;
 151 +                                       __le16 params;
 152 +                                       __le16 reason_code;
 153 +                               }__attribute__((packed)) delba;
 154                         } u;
 155                 } __attribute__ ((packed)) action;
 156         } u;
 157 @@ -270,6 +400,18 @@ enum ieee80211_statuscode {
 158         WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
 159         WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
 160         WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
 161 +       /* 802.11e */
 162 +       WLAN_STATUS_UNSPECIFIED_QOS = 32,
 163 +       WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33,
 164 +       WLAN_STATUS_ASSOC_DENIED_LOWACK = 34,
 165 +       WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35,
 166 +       WLAN_STATUS_REQUEST_DECLINED = 37,
 167 +       WLAN_STATUS_INVALID_QOS_PARAM = 38,
 168 +       WLAN_STATUS_CHANGE_TSPEC = 39,
 169 +       WLAN_STATUS_WAIT_TS_DELAY = 47,
 170 +       WLAN_STATUS_NO_DIRECT_LINK = 48,
 171 +       WLAN_STATUS_STA_NOT_PRESENT = 49,
 172 +       WLAN_STATUS_STA_NOT_QSTA = 50,
 173  };
 174
 175
 176 @@ -300,9 +442,50 @@ enum ieee80211_reasoncode {
 177         WLAN_REASON_INVALID_RSN_IE_CAP = 22,
 178         WLAN_REASON_IEEE8021X_FAILED = 23,
 179         WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
 180 +       /* 802.11e */
 181 +       WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32,
 182 +       WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33,
 183 +       WLAN_REASON_DISASSOC_LOW_ACK = 34,
 184 +       WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35,
 185 +       WLAN_REASON_QSTA_LEAVE_QBSS = 36,
 186 +       WLAN_REASON_QSTA_NOT_USE = 37,
 187 +       WLAN_REASON_QSTA_REQUIRE_SETUP = 38,
 188 +       WLAN_REASON_QSTA_TIMEOUT = 39,
 189 +       WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45,
 190  };
 191
 192
 193 +/* Category Code */
 194 +enum ieee80211_category {
 195 +       WLAN_CATEGORY_SPECTRUM_MGMT = 0,
 196 +       WLAN_CATEGORY_QOS = 1,
 197 +       WLAN_CATEGORY_DLS = 2,
 198 +       WLAN_CATEGORY_BACK = 3,
 199 +       WLAN_CATEGORY_WMM = 17,
 200 +};
 201 +
 202 +/* QoS Action Code */
 203 +enum ieee80211_qos_actioncode {
 204 +       WLAN_ACTION_QOS_ADDTS_REQ = 0,
 205 +       WLAN_ACTION_QOS_ADDTS_RESP = 1,
 206 +       WLAN_ACTION_QOS_DELTS = 2,
 207 +       WLAN_ACTION_QOS_SCHEDULE = 3,
 208 +};
 209 +
 210 +/* DLS Action Code */
 211 +enum ieee80211_dls_actioncode {
 212 +       WLAN_ACTION_DLS_REQ = 0,
 213 +       WLAN_ACTION_DLS_RESP = 1,
 214 +       WLAN_ACTION_DLS_TEARDOWN = 2,
 215 +};
 216 +
 217 +/* BACK Action Code */
 218 +enum ieee80211_back_actioncode {
 219 +       WLAN_ACTION_ADDBA_REQ = 0,
 220 +       WLAN_ACTION_ADDBA_RESP = 1,
 221 +       WLAN_ACTION_DELBA = 2,
 222 +};
 223 +
 224  /* Information Element IDs */
 225  enum ieee80211_eid {
 226         WLAN_EID_SSID = 0,
 227 @@ -318,6 +501,15 @@ enum ieee80211_eid {
 228         WLAN_EID_HP_PARAMS = 8,
 229         WLAN_EID_HP_TABLE = 9,
 230         WLAN_EID_REQUEST = 10,
 231 +       /* 802.11e */
 232 +       WLAN_EID_QBSS_LOAD = 11,
 233 +       WLAN_EID_EDCA_PARAM_SET = 12,
 234 +       WLAN_EID_TSPEC = 13,
 235 +       WLAN_EID_TCLAS = 14,
 236 +       WLAN_EID_SCHEDULE = 15,
 237 +       WLAN_EID_TS_DELAY = 43,
 238 +       WLAN_EID_TCLAS_PROCESSING = 44,
 239 +       WLAN_EID_QOS_CAPA = 46,
 240         /* 802.11h */
 241         WLAN_EID_PWR_CONSTRAINT = 32,
 242         WLAN_EID_PWR_CAPABILITY = 33,
 243 @@ -332,6 +524,9 @@ enum ieee80211_eid {
 244         /* 802.11g */
 245         WLAN_EID_ERP_INFO = 42,
 246         WLAN_EID_EXT_SUPP_RATES = 50,
 247 +       /* 802.11n */
 248 +       WLAN_EID_HT_CAPABILITY = 45,
 249 +       WLAN_EID_HT_EXTRA_INFO = 61,
 250         /* 802.11i */
 251         WLAN_EID_RSN = 48,
 252         WLAN_EID_WPA = 221,
 253 @@ -340,6 +535,9 @@ enum ieee80211_eid {
 254         WLAN_EID_QOS_PARAMETER = 222
 255  };
 256
 257 +/* 80211n */
 258 +#define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080
 259 +
 260  /* cipher suite selectors */
 261  #define WLAN_CIPHER_SUITE_USE_GROUP    0x000FAC00
 262  #define WLAN_CIPHER_SUITE_WEP40                0x000FAC01
 263 @@ -350,4 +548,37 @@ enum ieee80211_eid {
 264
 265  #define WLAN_MAX_KEY_LEN               32
 266
 267 +enum ieee80211_tsinfo_direction {
 268 +       WLAN_TSINFO_UPLINK = 0,
 269 +       WLAN_TSINFO_DOWNLINK = 1,
 270 +       WLAN_TSINFO_DIRECTLINK = 2,
 271 +       WLAN_TSINFO_BIDIRECTIONAL = 3,
 272 +};
 273 +
 274 +enum ieee80211_tsinfo_access {
 275 +       WLAN_TSINFO_EDCA = 1,
 276 +       WLAN_TSINFO_HCCA = 2,
 277 +       WLAN_TSINFO_HEMM = 3,
 278 +};
 279 +
 280 +enum ieee80211_tsinfo_psb {
 281 +       WLAN_TSINFO_PSB_LEGACY = 0,
 282 +       WLAN_TSINFO_PSB_APSD = 1,
 283 +};
 284 +
 285 +
 286 +/* WI-FI Alliance OUI Type and Subtype */
 287 +enum wifi_oui_type {
 288 +       WIFI_OUI_TYPE_WPA = 1,
 289 +       WIFI_OUI_TYPE_WMM = 2,
 290 +       WIFI_OUI_TYPE_WSC = 4,
 291 +       WIFI_OUI_TYPE_PSD = 6,
 292 +};
 293 +
 294 +enum wifi_oui_stype_wmm {
 295 +       WIFI_OUI_STYPE_WMM_INFO = 0,
 296 +       WIFI_OUI_STYPE_WMM_PARAM = 1,
 297 +       WIFI_OUI_STYPE_WMM_TSPEC = 2,
 298 +};
 299 +
 300  #endif /* IEEE80211_H */
 301 --- a/include/linux/nl80211.h
 302 +++ b/include/linux/nl80211.h
 303 @@ -7,6 +7,217 @@
 304   */
 305
 306  /**
 307 + * enum nl80211_commands - supported nl80211 commands
 308 + * @NL80211_CMD_UNSPEC: unspecified command to catch errors
 309 + * @NL80211_CMD_RENAME_WIPHY: rename a wiphy, needs
 310 + *     %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME
 311 + * @NL80211_CMD_WIPHY_NEWNAME: rename notification
 312 + * @NL80211_CMD_GET_CMDLIST: TO BE DEFINED PROPERLY. currently the code makes
 313 + *     it depend on the wiphy only but it really should depend on the
 314 + *     interface type too....
 315 + * @NL80211_CMD_NEW_CMDLIST: command list result
 316 + * @NL80211_CMD_ADD_VIRTUAL_INTERFACE: create a virtual interface for the
 317 + *     wiphy identified by an %NL80211_ATTR_WIPHY attribute with the given
 318 + *     %NL80211_ATTR_IFTYPE and %NL80211_ATTR_IFNAME.
 319 + * @NL80211_CMD_DEL_VIRTUAL_INTERFACE: destroy a virtual interface identified
 320 + *     by %NL80211_ATTR_IFINDEX.
 321 + * @NL80211_CMD_CHANGE_VIRTUAL_INTERFACE: change type of virtual interface to
 322 + *     the type given by %NL80211_ATTR_IFTYPE, the interface is identified by
 323 + *     %NL80211_ATTR_IFINDEX.
 324 + * @NL80211_CMD_GET_WIPHYS: request a list of all wiphys present in the system
 325 + * @NL80211_CMD_NEW_WIPHYS: returned list of all wiphys
 326 + * @NL80211_CMD_GET_INTERFACES: request a list of all interfaces belonging to
 327 + *     the wiphy identified by %NL80211_ATTR_WIPHY
 328 + * @NL80211_CMD_NEW_INTERFACES: result for %NL80211_CMD_GET_INTERFACES
 329 + * @NL80211_CMD_INITIATE_SCAN: initiate a scan with the passed parameters. THe
 330 + *     parameters may contain %NL80211_ATTR_FLAG_SCAN_ACTIVE,
 331 + *     %NL80211_ATTR_PHYMODE and a list of channels in an
 332 + *     %NL80211_ATTR_CHANNEL_LIST attribute (an array of nested attributes)
 333 + *     containing %NL80211_ATTR_CHANNEL, %NL80211_ATTR_PHYMODE, and possibly
 334 + *     %NL80211_ATTR_FLAG_SCAN_ACTIVE. The outer %NL80211_ATTR_FLAG_SCAN_ACTIVE
 335 + *     is ignored when a channel list is present.
 336 + * @NL80211_CMD_SCAN_RESULT: scan result, contains an array in
 337 + *     %NL80211_ATTR_BSS_LIST.
 338 + * @NL80211_CMD_ASSOCIATE: associate with the given parameters
 339 + *     (%NL80211_ATTR_SSID is mandatory, %NL80211_ATTR_TIMEOUT_TU,
 340 + *     %NL80211_ATTR_BSSID, %NL80211_ATTR_CHANNEL, %NL80211_ATTR_PHYMODE,
 341 + *     and %NL80211_ATTR_IE may be given)
 342 + * @NL80211_CMD_ADD_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
 343 + *     %NL80211_ATTR_KEY_ID, %NL80211_ATTR_KEY_TYPE, %NL80211_ATTR_MAC and
 344 + *     %NL80211_ATTR_KEY_CIPHER attributes.
 345 + * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_ID,
 346 + *     %NL80211_ATTR_KEY_TYPE and %NL80211_ATTR_MAC or all keys.
 347 + * @__NL80211_CMD_AFTER_LAST: internal use
 348 + */
 349 +enum nl80211_commands {
 350 +/* don't change the order or add anything inbetween, this is ABI! */
 351 +       NL80211_CMD_UNSPEC,
 352 +       /* %input: wiphy, wiphy_name */
 353 +       NL80211_CMD_RENAME_WIPHY,
 354 +       NL80211_CMD_WIPHY_NEWNAME,
 355 +       /* %input: wiphy|ifindex */
 356 +       NL80211_CMD_GET_CMDLIST,
 357 +       NL80211_CMD_NEW_CMDLIST,
 358 +       /* %input: wiphy, ifname, {iftype} */
 359 +       NL80211_CMD_ADD_VIRTUAL_INTERFACE,
 360 +       /* %input: wiphy, ifindex */
 361 +       NL80211_CMD_DEL_VIRTUAL_INTERFACE,
 362 +       /* %input: ifindex, iftype */
 363 +       NL80211_CMD_CHANGE_VIRTUAL_INTERFACE,
 364 +       /* %input: */
 365 +       NL80211_CMD_GET_WIPHYS,
 366 +       NL80211_CMD_NEW_WIPHYS,
 367 +       /* %input: wiphy */
 368 +       NL80211_CMD_GET_INTERFACES,
 369 +       NL80211_CMD_NEW_INTERFACES,
 370 +       NL80211_CMD_INITIATE_SCAN,
 371 +       NL80211_CMD_SCAN_RESULT,
 372 +       NL80211_CMD_GET_ASSOCIATION,
 373 +       NL80211_CMD_ASSOCIATION_CHANGED,
 374 +       NL80211_CMD_ASSOCIATE,
 375 +       NL80211_CMD_DISASSOCIATE,
 376 +       NL80211_CMD_DEAUTH,
 377 +       NL80211_CMD_GET_AUTH_LIST,
 378 +       NL80211_CMD_NEW_AUTH_LIST,
 379 +       NL80211_CMD_AUTHENTICATION_CHANGED,
 380 +       NL80211_CMD_AP_SET_BEACON,
 381 +       NL80211_CMD_AP_ADD_STA,
 382 +       NL80211_CMD_AP_UPDATE_STA,
 383 +       NL80211_CMD_AP_GET_STA_INFO,
 384 +       NL80211_CMD_AP_SET_RATESETS,
 385 +       NL80211_CMD_ADD_KEY,
 386 +       NL80211_CMD_DEL_KEY,
 387 +
 388 +       /* add commands here */
 389 +
 390 +       /* used to define NL80211_CMD_MAX below */
 391 +       __NL80211_CMD_AFTER_LAST
 392 +};
 393 +#define NL80211_CMD_MAX (__NL80211_CMD_AFTER_LAST - 1)
 394 +
 395 +
 396 +/**
 397 + * enum nl80211_attrs - nl80211 netlink attributes
 398 + * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
 399 + * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
 400 + * @NL80211_ATTR_IFNAME: network interface name
 401 + * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
 402 + *     /sys/class/ieee80211/<phyname>/index
 403 + * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
 404 + * @NL80211_ATTR_CMDS: list of u8's identifying commands a device supports
 405 + * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
 406 + * @NL80211_ATTR_INTERFACE_LIST: interface array, nested netlink attribute
 407 + * @NL80211_ATTR_WIPHY_LIST: wiphy array, nested netlink attribute
 408 + * @NL80211_ATTR_BSSID: BSSID (must be 6 bytes)
 409 + * @NL80211_ATTR_SSID: SSID (1-32 bytes)
 410 + * @NL80211_ATTR_CHANNEL: channel number
 411 + * @NL80211_ATTR_PHYMODE: PHY mode, see &enum nl80211_phymode
 412 + * @NL80211_ATTR_CHANNEL_LIST: netlink nested attribute array containing scan
 413 + *     parameters for channels
 414 + * @NL80211_ATTR_BSS_LIST: nested attribute containing an array
 415 + * @NL80211_ATTR_BSSTYPE: BSS type, see &enum nl80211_bsstype
 416 + * @NL80211_ATTR_BEACON_PERIOD: beacon period
 417 + * @NL80211_ATTR_DTIM_PERIOD: DTIM period
 418 + * @NL80211_ATTR_TIMESTAMP: 64-bit timestamp of received beacon/probe response
 419 + * @NL80211_ATTR_IE: information element(s), maximum length %NL80211_MAX_IE_LEN
 420 + * @NL80211_ATTR_AUTH_ALGORITHM: authentication algorithm
 421 + * @NL80211_ATTR_TIMEOUT_TU: timeout in TU (TO BE USED)
 422 + * @NL80211_ATTR_REASON_CODE: 802.11 reason code
 423 + * @NL80211_ATTR_ASSOCIATION_ID: association ID (u16, 1-2007)
 424 + * @NL80211_ATTR_DEAUTHENTICATED: TO BE USED
 425 + * @NL80211_ATTR_RX_SENSITIVITY: receiver sensitivity in dBm
 426 + * @NL80211_ATTR_TRANSMIT_POWER: transmit power in mW
 427 + * @NL80211_ATTR_FRAG_THRESHOLD: fragmentation threshold (bytes)
 428 + * @NL80211_ATTR_FLAG_SCAN_ACTIVE: netlink flag indiciating active scan
 429 + * @NL80211_ATTR_KEY_DATA: temporal key data
 430 + * @NL80211_ATTR_KEY_ID: key ID (u8, 0-3)
 431 + * @NL80211_ATTR_KEY_TYPE: key type (see &enum nl80211_keytype)
 432 + * @NL80211_ATTR_MAC: MAC address
 433 + * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32)
 434 + * @__NL80211_ATTR_AFTER_LAST: internal use
 435 + */
 436 +enum nl80211_attrs {
 437 +/* don't change the order or add anything inbetween, this is ABI! */
 438 +       NL80211_ATTR_UNSPEC,
 439 +       /* %type: u32 */
 440 +       NL80211_ATTR_IFINDEX,
 441 +       /* %type: nulstring */
 442 +       NL80211_ATTR_IFNAME,
 443 +       /* %type: u32 */
 444 +       NL80211_ATTR_WIPHY,
 445 +       /* %type: nulstring */
 446 +       NL80211_ATTR_WIPHY_NAME,
 447 +       NL80211_ATTR_CMDS,
 448 +       /* %type: u32 */
 449 +       NL80211_ATTR_IFTYPE,
 450 +       NL80211_ATTR_INTERFACE_LIST,
 451 +       NL80211_ATTR_WIPHY_LIST,
 452 +       NL80211_ATTR_BSSID,
 453 +       NL80211_ATTR_SSID,
 454 +       NL80211_ATTR_CHANNEL,
 455 +       NL80211_ATTR_PHYMODE,
 456 +       NL80211_ATTR_CHANNEL_LIST,
 457 +       NL80211_ATTR_BSS_LIST,
 458 +       NL80211_ATTR_BSSTYPE,
 459 +       NL80211_ATTR_BEACON_PERIOD,
 460 +       NL80211_ATTR_DTIM_PERIOD,
 461 +       NL80211_ATTR_TIMESTAMP,
 462 +       NL80211_ATTR_IE,
 463 +       NL80211_ATTR_AUTH_ALGORITHM,
 464 +       NL80211_ATTR_TIMEOUT_TU,
 465 +       NL80211_ATTR_REASON_CODE,
 466 +       NL80211_ATTR_ASSOCIATION_ID,
 467 +       NL80211_ATTR_DEAUTHENTICATED,
 468 +       NL80211_ATTR_RX_SENSITIVITY,
 469 +       NL80211_ATTR_TRANSMIT_POWER,
 470 +       NL80211_ATTR_FRAG_THRESHOLD,
 471 +       NL80211_ATTR_FLAG_SCAN_ACTIVE,
 472 +
 473 +       NL80211_ATTR_KEY_DATA,
 474 +       NL80211_ATTR_KEY_ID,
 475 +       NL80211_ATTR_KEY_TYPE,
 476 +       NL80211_ATTR_MAC,
 477 +       NL80211_ATTR_KEY_CIPHER,
 478 +
 479 +       NL80211_ATTR_BEACON_HEAD,
 480 +       NL80211_ATTR_BEACON_TAIL,
 481 +
 482 +       /* add attributes here, update the policy in nl80211.c */
 483 +
 484 +       /* used to define NL80211_ATTR_MAX below */
 485 +       __NL80211_ATTR_AFTER_LAST,
 486 +};
 487 +#define NL80211_ATTR_MAX (__NL80211_ATTR_AFTER_LAST - 1)
 488 +
 489 +/**
 490 + * enum nl80211_multicast_groups - multicast groups for nl80211
 491 + * @NL80211_GROUP_CONFIG: members of this group are notified of
 492 + *     configuration changes
 493 + */
 494 +enum nl80211_multicast_groups {
 495 +       /* be notified of configuration changes like wiphy renames */
 496 +       NL80211_GROUP_CONFIG,
 497 +
 498 +       /* add groups here */
 499 +
 500 +       /* keep last */
 501 +       __NL80211_GROUP_AFTER_LAST
 502 +};
 503 +#define NL80211_GROUP_MAX (__NL80211_GROUP_AFTER_LAST - 1)
 504 +
 505 +/*
 506 + * maximum length of IE(s) passed in an NL80211_ATTR_IE.
 507 + * this is an arbitrary limit, 774 means three full-length
 508 + * IEs would fit... increase if necessary */
 509 +#define NL80211_MAX_IE_LEN 774
 510 +
 511 +/*
 512 + * maximum number of items in an ATTR_CHANNEL_LIST,
 513 + * just to avoid too large allocations
 514 + */
 515 +#define NL80211_MAX_CHANNEL_LIST_ITEM 200
 516 +
 517 +/**
 518   * enum nl80211_iftype - (virtual) interface types
 519   * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
 520   * @NL80211_IFTYPE_ADHOC: independent BSS member
 521 @@ -35,4 +246,56 @@ enum nl80211_iftype {
 522  };
 523  #define NL80211_IFTYPE_MAX (__NL80211_IFTYPE_AFTER_LAST - 1)
 524
 525 +/**
 526 + * enum nl80211_phymode - PHY modes
 527 + * @NL80211_PHYMODE_A: 5 GHz PHY
 528 + * @NL80211_PHYMODE_B: 2.4 GHz PHY (B mode)
 529 + * @NL80211_PHYMODE_G: 2.4 GHz PHY (G, compatible with B)
 530 + * @__NL80211_PHYMODE_AFTER_LAST: internal use
 531 + *
 532 + * These values are used for %NL80211_ATTR_PHYMODE.
 533 + */
 534 +enum nl80211_phymode {
 535 +       NL80211_PHYMODE_A,
 536 +       NL80211_PHYMODE_B,
 537 +       NL80211_PHYMODE_G,
 538 +
 539 +       /* keep last */
 540 +       __NL80211_PHYMODE_AFTER_LAST
 541 +};
 542 +#define NL80211_PHYMODE_MAX (__NL80211_PHYMODE_AFTER_LAST - 1)
 543 +
 544 +/**
 545 + * enum nl80211_bsstype - BSS types
 546 + * @NL80211_BSSTYPE_INFRASTRUCTURE: infrastructure BSS
 547 + * @NL80211_BSSTYPE_INDEPENDENT: independent BSS (ad-hoc network)
 548 + * @__NL80211_BSSTYPE_AFTER_LAST: internal use
 549 + *
 550 + * These values are used for %NL80211_ATTR_BSSTYPE.
 551 + */
 552 +enum nl80211_bsstype {
 553 +       NL80211_BSSTYPE_INFRASTRUCTURE,
 554 +       NL80211_BSSTYPE_INDEPENDENT,
 555 +
 556 +       /* keep last */
 557 +       __NL80211_BSSTYPE_AFTER_LAST
 558 +};
 559 +#define NL80211_BSSTYPE_MAX (__NL80211_BSSTYPE_AFTER_LAST - 1)
 560 +
 561 +/**
 562 + * enum nl80211_keytype - key types
 563 + * @NL80211_KEYTYPE_GROUP: group key
 564 + * @NL80211_KEYTYPE_PAIRWISE: pairwise key
 565 + * @NL80211_KEYTYPE_PEER: peer key
 566 + */
 567 +enum nl80211_keytype {
 568 +       NL80211_KEYTYPE_GROUP,
 569 +       NL80211_KEYTYPE_PAIRWISE,
 570 +       NL80211_KEYTYPE_PEER,
 571 +
 572 +       /* keep last */
 573 +       __NL80211_KEYTYPE_AFTER_LAST
 574 +};
 575 +#define NL80211_KEYTYPE_MAX (__NL80211_KEYTYPE_AFTER_LAST - 1)
 576 +
 577  #endif /* __LINUX_NL80211_H */
 578 --- a/include/net/cfg80211.h
 579 +++ b/include/net/cfg80211.h
 580 @@ -3,6 +3,7 @@
 581
 582  #include <linux/netlink.h>
 583  #include <linux/skbuff.h>
 584 +#include <linux/nl80211.h>
 585  #include <net/genetlink.h>
 586
 587  /*
 588 @@ -49,6 +50,69 @@ extern int ieee80211_radiotap_iterator_n
 589     struct ieee80211_radiotap_iterator *iterator);
 590
 591
 592 +/**
 593 + * struct scan_channel - describes a single channel to scan
 594 + * @phymode: PHY mode for this channel
 595 + * @channel: channel number (1-14, ...)
 596 + * @active: scan actively or passively on this channel
 597 + */
 598 +struct scan_channel {
 599 +       enum nl80211_phymode phymode;
 600 +       u32 channel;
 601 +       int active;
 602 +};
 603 +
 604 +/**
 605 + * struct scan_params - describes scan parameters
 606 + * @n_channels: number of items in @channels array or -1 to indicate all
 607 + *     channels should be scanned (in that case @channels will be %NULL)
 608 + * @active: when n_channels is -1 this determines active/passive scanning.
 609 + * @phymode: when n_channels is -1 this determines PHY mode to scan. It is
 610 + *     not possible to scan different PHY modes in one request w/o giving
 611 + *     a channel list.
 612 + * @channels: array containing @n_channels &struct scan_channel items
 613 + */
 614 +struct scan_params {
 615 +       int n_channels;
 616 +       int active;
 617 +       enum nl80211_phymode phymode;
 618 +       struct scan_channel *channels;
 619 +};
 620 +
 621 +/**
 622 + * struct association_params - describes association parameters
 623 + * @valid: this member contains flags which items are valid
 624 + * @bssid: the BSSID of the BSS to associate [%ASSOC_PARAMS_BSSID]
 625 + * @timeout: timeout (in TU) [%ASSOC_PARAMS_TIMEOUT]
 626 + * @ie: information element(s) to include in the association frames [%ASSOC_PARAMS_IE]
 627 + * @ie_len: length of the information element(s)
 628 + * @ssid: the SSID, always valid.
 629 + * @ssid_len: length of the SSID
 630 + */
 631 +struct association_params {
 632 +       u8 *bssid;
 633 +       u32 timeout;
 634 +       u8 *ie;
 635 +       int ie_len;
 636 +       u8 *ssid;
 637 +       int ssid_len;
 638 +
 639 +       unsigned int valid;
 640 +};
 641 +#define ASSOC_PARAMS_TIMEOUT   (1<<0)
 642 +
 643 +/**
 644 + * struct key_params - key information
 645 + */
 646 +struct key_params {
 647 +       u8 *key;
 648 +       int key_len;
 649 +       int key_id;
 650 +       u32 key_type;
 651 +       u8 *macaddress;
 652 +       u32 cipher;
 653 +};
 654 +
 655  /* from net/wireless.h */
 656  struct wiphy;
 657
 658 @@ -68,11 +132,62 @@ struct wiphy;
 659   * @add_virtual_intf: create a new virtual interface with the given name
 660   *
 661   * @del_virtual_intf: remove the virtual interface determined by ifindex.
 662 + *
 663 + * @change_virtual_intf: change type of virtual interface
 664 + *
 665 + * @associate: associate with given parameters
 666 + *
 667 + * @disassociate: disassociate from current AP
 668 + *
 669 + * @deauth: deauth from current AP
 670 + *
 671 + * @initiate_scan: scan with the given information (see &struct scan_params above)
 672 + *
 673 + * @get_association: get BSSID of the BSS that the device is currently
 674 + *                  associated to and return 1, or return 0 if not
 675 + *                  associated (or a negative error code)
 676 + * @get_auth_list: get list of BSSIDs of all BSSs the device has
 677 + *                authenticated with, must call next_bssid for each,
 678 + *                next_bssid returns non-zero on error, the given data
 679 + *                is to be passed to that callback
 680 + * @add_key: add a key using &struct key_params
 681 + * @del_key: delete a key using info from &struct key_params
 682   */
 683  struct cfg80211_ops {
 684         int     (*add_virtual_intf)(struct wiphy *wiphy, char *name,
 685 -                                   unsigned int type);
 686 +                                   enum nl80211_iftype type);
 687         int     (*del_virtual_intf)(struct wiphy *wiphy, int ifindex);
 688 +       int     (*change_virtual_intf)(struct wiphy *wiphy, int ifindex,
 689 +                                      enum nl80211_iftype type);
 690 +
 691 +       int     (*associate)(struct wiphy *wiphy, struct net_device *dev,
 692 +                            struct association_params *params);
 693 +       int     (*disassociate)(struct wiphy *wiphy, struct net_device *dev);
 694 +       int     (*deauth)(struct wiphy *wiphy, struct net_device *dev);
 695 +
 696 +
 697 +       int     (*initiate_scan)(struct wiphy *wiphy, struct net_device *dev,
 698 +                                struct scan_params *params);
 699 +
 700 +
 701 +       int     (*get_association)(struct wiphy *wiphy, struct net_device *dev,
 702 +                                  u8 *bssid);
 703 +
 704 +       int     (*get_auth_list)(struct wiphy *wiphy, struct net_device *dev,
 705 +                                void *data,
 706 +                                int (*next_bssid)(void *data, u8 *bssid));
 707 +
 708 +       int     (*add_key)(struct wiphy *wiphy, struct net_device *dev,
 709 +                          struct key_params *params);
 710 +       int     (*del_key)(struct wiphy *wiphy, struct net_device *dev,
 711 +                          struct key_params *params);
 712  };
 713
 714 +
 715 +/* helper functions specific to nl80211 */
 716 +extern void *nl80211hdr_put(struct sk_buff *skb, u32 pid,
 717 +                           u32 seq, int flags, u8 cmd);
 718 +extern void *nl80211msg_new(struct sk_buff **skb, u32 pid,
 719 +                           u32 seq, int flags, u8 cmd);
 720 +
 721  #endif /* __NET_CFG80211_H */
 722 --- a/include/net/iw_handler.h
 723 +++ b/include/net/iw_handler.h
 724 @@ -431,7 +431,13 @@ struct iw_public_data {
 725   * Those may be called only within the kernel.
 726   */
 727
 728 -/* functions that may be called by driver modules */
 729 +/* First : function strictly used inside the kernel */
 730 +
 731 +/* Handle /proc/net/wireless, called in net/code/dev.c */
 732 +extern int dev_get_wireless_info(char * buffer, char **start, off_t offset,
 733 +                                int length);
 734 +
 735 +/* Second : functions that may be called by driver modules */
 736
 737  /* Send a single event to user space */
 738  extern void wireless_send_event(struct net_device *    dev,
 739 --- a/include/net/mac80211.h
 740 +++ b/include/net/mac80211.h
 741 @@ -300,7 +300,6 @@ struct ieee80211_conf {
 742         /* Following five fields are used for IEEE 802.11H */
 743         unsigned int radar_detect;
 744         unsigned int spect_mgmt;
 745 -       /* All following fields are currently unused. */
 746         unsigned int quiet_duration; /* duration of quiet period */
 747         unsigned int quiet_offset; /* how far into the beacon is the quiet
 748                                     * period */
 749 @@ -521,6 +520,9 @@ struct ieee80211_hw {
 750          * per-packet RC4 key with each TX frame when doing hwcrypto */
 751  #define IEEE80211_HW_TKIP_REQ_PHASE2_KEY (1<<14)
 752
 753 +       /* The device capable of supporting 11n */
 754 +#define IEEE80211_HW_SUPPORT_HT_MODE (1<<15)
 755 +
 756         u32 flags;                      /* hardware flags defined above */
 757
 758         /* Set to the size of a needed device specific skb headroom for TX skbs. */
 759 @@ -649,8 +651,7 @@ struct ieee80211_ops {
 760          * used if the wlan hardware or low-level driver implements PAE.
 761          * 80211.o module will anyway filter frames based on authorization
 762          * state, so this function pointer can be NULL if low-level driver does
 763 -        * not require event notification about port state changes.
 764 -        * Currently unused. */
 765 +        * not require event notification about port state changes. */
 766         int (*set_port_auth)(struct ieee80211_hw *hw, u8 *addr,
 767                              int authorized);
 768
 769 @@ -702,8 +703,9 @@ struct ieee80211_ops {
 770         /* Get statistics of the current TX queue status. This is used to get
 771          * number of currently queued packets (queue length), maximum queue
 772          * size (limit), and total number of packets sent using each TX queue
 773 -        * (count).
 774 -        * Currently unused. */
 775 +        * (count). This information is used for WMM to find out which TX
 776 +        * queues have room for more packets and by hostapd to provide
 777 +        * statistics about the current queueing state to external programs. */
 778         int (*get_tx_stats)(struct ieee80211_hw *hw,
 779                             struct ieee80211_tx_queue_stats *stats);
 780
 781 @@ -713,12 +715,25 @@ struct ieee80211_ops {
 782          * Must be atomic. */
 783         u64 (*get_tsf)(struct ieee80211_hw *hw);
 784
 785 +       /* Call low level driver with 11n Block Ack action */
 786 +       int (*handle_ba_action)(struct ieee80211_hw *hw,
 787 +                               struct ieee80211_mgmt *mgmt);
 788 +
 789         /* Reset the TSF timer and allow firmware/hardware to synchronize with
 790          * other STAs in the IBSS. This is only used in IBSS mode. This
 791          * function is optional if the firmware/hardware takes full care of
 792          * TSF synchronization. */
 793         void (*reset_tsf)(struct ieee80211_hw *hw);
 794
 795 +       /* Configure ht parameters. */
 796 +       int (*conf_ht)(struct ieee80211_hw *hw,
 797 +                      struct ieee80211_ht_capability *ht_cap_param,
 798 +                      struct ieee80211_ht_additional_info *ht_extra_param);
 799 +
 800 +       /* Get ht capabilities from the device */
 801 +       void (*get_ht_capab)(struct ieee80211_hw *hw,
 802 +                            struct ieee80211_ht_capability *ht_cap_param);
 803 +
 804         /* Setup beacon data for IBSS beacons. Unlike access point (Master),
 805          * IBSS uses a fixed beacon frame which is configured using this
 806          * function. This handler is required only for IBSS mode. */