target/linux/generic-2.6/files-2.6.30/drivers/net/phy/mvswitch.c

   1 /*
   2  * Marvell 88E6060 switch driver
   3  * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
   4  *
   5  * This program is free software; you can redistribute  it and/or modify it
   6  * under  the terms of the GNU General Public License v2 as published by the
   7  * Free Software Foundation
   8  */
   9 #include <linux/kernel.h>
  10 #include <linux/string.h>
  11 #include <linux/errno.h>
  12 #include <linux/unistd.h>
  13 #include <linux/slab.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/init.h>
  16 #include <linux/delay.h>
  17 #include <linux/netdevice.h>
  18 #include <linux/etherdevice.h>
  19 #include <linux/skbuff.h>
  20 #include <linux/spinlock.h>
  21 #include <linux/mm.h>
  22 #include <linux/module.h>
  23 #include <linux/mii.h>
  24 #include <linux/ethtool.h>
  25 #include <linux/phy.h>
  26 #include <linux/if_vlan.h>
  27
  28 #include <asm/io.h>
  29 #include <asm/irq.h>
  30 #include <asm/uaccess.h>
  31 #include "mvswitch.h"
  32
  33 /* Undefine this to use trailer mode instead.
  34  * I don't know if header mode works with all chips */
  35 #define HEADER_MODE     1
  36
  37 MODULE_DESCRIPTION("Marvell 88E6060 Switch driver");
  38 MODULE_AUTHOR("Felix Fietkau");
  39 MODULE_LICENSE("GPL");
  40
  41 #define MVSWITCH_MAGIC 0x88E6060
  42
  43 struct mvswitch_priv {
  44         const struct net_device_ops *ndo_old;
  45         struct net_device_ops ndo;
  46         struct vlan_group *grp;
  47         u8 vlans[16];
  48 };
  49
  50 #define to_mvsw(_phy) ((struct mvswitch_priv *) (_phy)->priv)
  51
  52 static inline u16
  53 r16(struct phy_device *phydev, int addr, int reg)
  54 {
  55         return phydev->bus->read(phydev->bus, addr, reg);
  56 }
  57
  58 static inline void
  59 w16(struct phy_device *phydev, int addr, int reg, u16 val)
  60 {
  61         phydev->bus->write(phydev->bus, addr, reg, val);
  62 }
  63
  64
  65 static int
  66 mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev)
  67 {
  68         struct mvswitch_priv *priv;
  69         char *buf = NULL;
  70         u16 vid;
  71
  72         priv = dev->phy_ptr;
  73         if (unlikely(!priv))
  74                 goto error;
  75
  76         if (unlikely(skb->len < 16))
  77                 goto error;
  78
  79 #ifdef HEADER_MODE
  80         if (__vlan_hwaccel_get_tag(skb, &vid))
  81                 goto error;
  82
  83         if (skb_cloned(skb) || (skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) {
  84                 if (pskb_expand_head(skb, MV_HEADER_SIZE, (skb->len < 62 ? 62 - skb->len : 0), GFP_ATOMIC))
  85                         goto error_expand;
  86                 if (skb->len < 62)
  87                         skb->len = 62;
  88         }
  89         buf = skb_push(skb, MV_HEADER_SIZE);
  90 #else
  91         if (__vlan_get_tag(skb, &vid))
  92                 goto error;
  93
  94         if (unlikely((vid > 15 || !priv->vlans[vid])))
  95                 goto error;
  96
  97         if (skb->len <= 64) {
  98                 if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC))
  99                         goto error_expand;
 100
 101                 buf = skb->data + 64;
 102                 skb->len = 64 + MV_TRAILER_SIZE;
 103         } else {
 104                 if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) {
 105                         if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC))
 106                                 goto error_expand;
 107                 }
 108                 buf = skb_put(skb, 4);
 109         }
 110
 111         /* move the ethernet header 4 bytes forward, overwriting the vlan tag */
 112         memmove(skb->data + 4, skb->data, 12);
 113         skb->data += 4;
 114         skb->len -= 4;
 115         skb->mac_header += 4;
 116 #endif
 117
 118         if (!buf)
 119                 goto error;
 120
 121
 122 #ifdef HEADER_MODE
 123         /* prepend the tag */
 124         *((__be16 *) buf) = cpu_to_be16(
 125                 ((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) |
 126                 ((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M)
 127         );
 128 #else
 129         /* append the tag */
 130         *((__be32 *) buf) = cpu_to_be32((
 131                 (MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) |
 132                 ((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S)
 133         ));
 134 #endif
 135
 136         return priv->ndo_old->ndo_start_xmit(skb, dev);
 137
 138 error_expand:
 139         if (net_ratelimit())
 140                 printk("%s: failed to expand/update skb for the switch\n", dev->name);
 141
 142 error:
 143         /* any errors? drop the packet! */
 144         dev_kfree_skb_any(skb);
 145         return 0;
 146 }
 147
 148 static int
 149 mvswitch_mangle_rx(struct sk_buff *skb, int napi)
 150 {
 151         struct mvswitch_priv *priv;
 152         struct net_device *dev;
 153         int vlan = -1;
 154         unsigned char *buf;
 155         int i;
 156
 157         dev = skb->dev;
 158         if (!dev)
 159                 goto error;
 160
 161         priv = dev->phy_ptr;
 162         if (!priv)
 163                 goto error;
 164
 165         if (!priv->grp)
 166                 goto error;
 167
 168 #ifdef HEADER_MODE
 169         buf = skb->data;
 170         skb_pull(skb, MV_HEADER_SIZE);
 171 #else
 172         buf = skb->data + skb->len - MV_TRAILER_SIZE;
 173         if (buf[0] != 0x80)
 174                 goto error;
 175 #endif
 176
 177         /* look for the vlan matching the incoming port */
 178         for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) {
 179                 if ((1 << buf[1]) & priv->vlans[i])
 180                         vlan = i;
 181         }
 182
 183         if (vlan == -1)
 184                 goto error;
 185
 186         skb->protocol = eth_type_trans(skb, skb->dev);
 187
 188         if (napi)
 189                 return vlan_hwaccel_receive_skb(skb, priv->grp, vlan);
 190         else
 191                 return vlan_hwaccel_rx(skb, priv->grp, vlan);
 192
 193 error:
 194         /* no vlan? eat the packet! */
 195         dev_kfree_skb_any(skb);
 196         return 0;
 197 }
 198
 199
 200 static int
 201 mvswitch_netif_rx(struct sk_buff *skb)
 202 {
 203         return mvswitch_mangle_rx(skb, 0);
 204 }
 205
 206 static int
 207 mvswitch_netif_receive_skb(struct sk_buff *skb)
 208 {
 209         return mvswitch_mangle_rx(skb, 1);
 210 }
 211
 212
 213 static void
 214 mvswitch_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
 215 {
 216         struct mvswitch_priv *priv = dev->phy_ptr;
 217         priv->grp = grp;
 218 }
 219
 220
 221 static int
 222 mvswitch_wait_mask(struct phy_device *pdev, int addr, int reg, u16 mask, u16 val)
 223 {
 224         int i = 100;
 225         u16 r;
 226
 227         do {
 228                 r = r16(pdev, addr, reg) & mask;
 229                 if (r == val)
 230                         return 0;
 231         } while(--i > 0);
 232         return -ETIMEDOUT;
 233 }
 234
 235 static int
 236 mvswitch_config_init(struct phy_device *pdev)
 237 {
 238         struct mvswitch_priv *priv = to_mvsw(pdev);
 239         struct net_device *dev = pdev->attached_dev;
 240         u8 vlmap = 0;
 241         int i;
 242
 243         if (!dev)
 244                 return -EINVAL;
 245
 246         printk("%s: Marvell 88E6060 PHY driver attached.\n", dev->name);
 247         pdev->supported = ADVERTISED_100baseT_Full;
 248         pdev->advertising = ADVERTISED_100baseT_Full;
 249         dev->phy_ptr = priv;
 250         dev->irq = PHY_POLL;
 251
 252         /* initialize default vlans */
 253         for (i = 0; i < MV_PORTS; i++)
 254                 priv->vlans[(i == MV_WANPORT ? 2 : 1)] |= (1 << i);
 255
 256         /* before entering reset, disable all ports */
 257         for (i = 0; i < MV_PORTS; i++)
 258                 w16(pdev, MV_PORTREG(CONTROL, i), 0x00);
 259
 260         msleep(2); /* wait for the status change to settle in */
 261
 262         /* put the ATU in reset */
 263         w16(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET);
 264
 265         i = mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET, 0);
 266         if (i < 0) {
 267                 printk("%s: Timeout waiting for the switch to reset.\n", dev->name);
 268                 return i;
 269         }
 270
 271         /* set the ATU flags */
 272         w16(pdev, MV_SWITCHREG(ATU_CTRL),
 273                 MV_ATUCTL_NO_LEARN |
 274                 MV_ATUCTL_ATU_1K |
 275                 MV_ATUCTL_AGETIME(MV_ATUCTL_AGETIME_MIN) /* minimum without disabling ageing */
 276         );
 277
 278         /* initialize the cpu port */
 279         w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT),
 280 #ifdef HEADER_MODE
 281                 MV_PORTCTRL_HEADER |
 282 #else
 283                 MV_PORTCTRL_RXTR |
 284                 MV_PORTCTRL_TXTR |
 285 #endif
 286                 MV_PORTCTRL_ENABLED
 287         );
 288         /* wait for the phy change to settle in */
 289         msleep(2);
 290         for (i = 0; i < MV_PORTS; i++) {
 291                 u8 pvid = 0;
 292                 int j;
 293
 294                 vlmap = 0;
 295
 296                 /* look for the matching vlan */
 297                 for (j = 0; j < ARRAY_SIZE(priv->vlans); j++) {
 298                         if (priv->vlans[j] & (1 << i)) {
 299                                 vlmap = priv->vlans[j];
 300                                 pvid = j;
 301                         }
 302                 }
 303                 /* leave port unconfigured if it's not part of a vlan */
 304                 if (!vlmap)
 305                         continue;
 306
 307                 /* add the cpu port to the allowed destinations list */
 308                 vlmap |= (1 << MV_CPUPORT);
 309
 310                 /* take port out of its own vlan destination map */
 311                 vlmap &= ~(1 << i);
 312
 313                 /* apply vlan settings */
 314                 w16(pdev, MV_PORTREG(VLANMAP, i),
 315                         MV_PORTVLAN_PORTS(vlmap) |
 316                         MV_PORTVLAN_ID(i)
 317                 );
 318
 319                 /* re-enable port */
 320                 w16(pdev, MV_PORTREG(CONTROL, i),
 321                         MV_PORTCTRL_ENABLED
 322                 );
 323         }
 324
 325         w16(pdev, MV_PORTREG(VLANMAP, MV_CPUPORT),
 326                 MV_PORTVLAN_ID(MV_CPUPORT)
 327         );
 328
 329         /* set the port association vector */
 330         for (i = 0; i <= MV_PORTS; i++) {
 331                 w16(pdev, MV_PORTREG(ASSOC, i),
 332                         MV_PORTASSOC_PORTS(1 << i)
 333                 );
 334         }
 335
 336         /* init switch control */
 337         w16(pdev, MV_SWITCHREG(CTRL),
 338                 MV_SWITCHCTL_MSIZE |
 339                 MV_SWITCHCTL_DROP
 340         );
 341
 342         /* hook into the tx function */
 343         priv->ndo_old = dev->netdev_ops;
 344         memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
 345         priv->ndo.ndo_start_xmit = mvswitch_mangle_tx;
 346         priv->ndo.ndo_vlan_rx_register = mvswitch_vlan_rx_register;
 347         dev->netdev_ops = &priv->ndo;
 348
 349         pdev->pkt_align = 2;
 350         pdev->netif_receive_skb = mvswitch_netif_receive_skb;
 351         pdev->netif_rx = mvswitch_netif_rx;
 352 #ifdef HEADER_MODE
 353         dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
 354 #else
 355         dev->features |= NETIF_F_HW_VLAN_RX;
 356 #endif
 357
 358         return 0;
 359 }
 360
 361 static int
 362 mvswitch_read_status(struct phy_device *pdev)
 363 {
 364         pdev->speed = SPEED_100;
 365         pdev->duplex = DUPLEX_FULL;
 366         pdev->state = PHY_UP;
 367
 368         /* XXX ugly workaround: we can't force the switch
 369          * to gracefully handle hosts moving from one port to another,
 370          * so we have to regularly clear the ATU database */
 371
 372         /* wait for the ATU to become available */
 373         mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
 374
 375         /* flush the ATU */
 376         w16(pdev, MV_SWITCHREG(ATU_OP),
 377                 MV_ATUOP_INPROGRESS |
 378                 MV_ATUOP_FLUSH_ALL
 379         );
 380
 381         /* wait for operation to complete */
 382         mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
 383
 384         return 0;
 385 }
 386
 387 static int
 388 mvswitch_config_aneg(struct phy_device *phydev)
 389 {
 390         return 0;
 391 }
 392
 393 static void
 394 mvswitch_remove(struct phy_device *pdev)
 395 {
 396         struct mvswitch_priv *priv = to_mvsw(pdev);
 397         struct net_device *dev = pdev->attached_dev;
 398
 399         /* restore old netdev ops */
 400         if (priv->ndo_old && dev)
 401                 dev->netdev_ops = priv->ndo_old;
 402         dev->vlan_rx_register = NULL;
 403         dev->vlan_rx_kill_vid = NULL;
 404         dev->phy_ptr = NULL;
 405         dev->features &= ~NETIF_F_HW_VLAN_RX;
 406         kfree(priv);
 407 }
 408
 409 static int
 410 mvswitch_probe(struct phy_device *pdev)
 411 {
 412         struct mvswitch_priv *priv;
 413
 414         priv = kzalloc(sizeof(struct mvswitch_priv), GFP_KERNEL);
 415         if (priv == NULL)
 416                 return -ENOMEM;
 417
 418         pdev->priv = priv;
 419
 420         return 0;
 421 }
 422
 423 static int
 424 mvswitch_fixup(struct phy_device *dev)
 425 {
 426         u16 reg;
 427
 428         if (dev->addr != 0x10)
 429                 return 0;
 430
 431         reg = dev->bus->read(dev->bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
 432         if (reg != MV_IDENT_VALUE)
 433                 return 0;
 434
 435         dev->phy_id = MVSWITCH_MAGIC;
 436         return 0;
 437 }
 438
 439
 440 static struct phy_driver mvswitch_driver = {
 441         .name           = "Marvell 88E6060",
 442         .phy_id         = MVSWITCH_MAGIC,
 443         .phy_id_mask    = 0xffffffff,
 444         .features       = PHY_BASIC_FEATURES,
 445         .probe          = &mvswitch_probe,
 446         .remove         = &mvswitch_remove,
 447         .config_init    = &mvswitch_config_init,
 448         .config_aneg    = &mvswitch_config_aneg,
 449         .read_status    = &mvswitch_read_status,
 450         .driver         = { .owner = THIS_MODULE,},
 451 };
 452
 453 static int __init
 454 mvswitch_init(void)
 455 {
 456         phy_register_fixup_for_id(PHY_ANY_ID, mvswitch_fixup);
 457         return phy_driver_register(&mvswitch_driver);
 458 }
 459
 460 static void __exit
 461 mvswitch_exit(void)
 462 {
 463         phy_driver_unregister(&mvswitch_driver);
 464 }
 465
 466 module_init(mvswitch_init);
 467 module_exit(mvswitch_exit);