[coldfire] use the proper serial device, change memory layout
[openwrt.git] / target / linux / ppc44x / patches / 004-canyonlands_dts_sync.patch
1 --- a/arch/powerpc/boot/dts/canyonlands.dts
2 +++ b/arch/powerpc/boot/dts/canyonlands.dts
3 @@ -40,6 +40,7 @@
4 d-cache-size = <32768>;
5 dcr-controller;
6 dcr-access-method = "native";
7 + next-level-cache = <&L2C0>;
8 };
9 };
10
11 @@ -104,6 +105,16 @@
12 dcr-reg = <0x00c 0x002>;
13 };
14
15 + L2C0: l2c {
16 + compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
17 + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
18 + 0x030 0x008>; /* L2 cache DCR's */
19 + cache-line-size = <32>; /* 32 bytes */
20 + cache-size = <262144>; /* L2, 256K */
21 + interrupt-parent = <&UIC1>;
22 + interrupts = <11 1>;
23 + };
24 +
25 plb {
26 compatible = "ibm,plb-460ex", "ibm,plb4";
27 #address-cells = <2>;
28 @@ -131,6 +142,43 @@
29 /*RXDE*/ 0x5 0x4>;
30 };
31
32 + USB0: ehci@bffd0400 {
33 + compatible = "ibm,usb-ehci-460ex", "usb-ehci";
34 + interrupt-parent = <&UIC2>;
35 + interrupts = <0x1d 4>;
36 + reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
37 + };
38 +
39 + USB1: usb@bffd0000 {
40 + compatible = "ohci-le";
41 + reg = <4 0xbffd0000 0x60>;
42 + interrupt-parent = <&UIC2>;
43 + interrupts = <0x1e 4>;
44 + };
45 +
46 + USBOTG0: usbotg@bff80000 {
47 + compatible = "amcc,usb-otg-460ex";
48 + reg = <4 0xbff80000 0x10000>;
49 + interrupt-parent = <&USBOTG0>;
50 + interrupts = <0 1 2>;
51 + #interrupt-cells = <1>;
52 + #address-cells = <0>;
53 + #size-cells = <0>;
54 + interrupt-map = </* USB-OTG */ 0 &UIC2 0x1c 4
55 + /* HIGH-POWER */ 1 &UIC1 0x1a 8
56 + /* DMA */ 2 &UIC0 0xc 4>;
57 + interrupt-map-mask = <0xffffffff>;
58 + };
59 +
60 + SATA0: sata@bffd1000 {
61 + compatible = "amcc,sata-460ex";
62 + reg = <4 0xbffd1000 0x800 /* SATA */
63 + 4 0xbffd0800 0x400>; /* AHBDMA */
64 + interrupt-parent = <&UIC3>;
65 + interrupts = <0 4 /* SATA */
66 + 5 4>; /* AHBDMA */
67 + };
68 +
69 POB0: opb {
70 compatible = "ibm,opb-460ex", "ibm,opb";
71 #address-cells = <1>;
72 @@ -222,6 +270,12 @@
73 reg = <0xef600700 0x00000014>;
74 interrupt-parent = <&UIC0>;
75 interrupts = <0x2 0x4>;
76 + #address-cells = <1>;
77 + #size-cells = <0>;
78 + rtc@68 {
79 + compatible = "stm,m41t80";
80 + reg = <68>;
81 + };
82 };
83
84 IIC1: i2c@ef600800 {
85 @@ -331,6 +385,7 @@
86 * later cannot be changed
87 */
88 ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
89 + 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
90 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
91
92 /* Inbound 2GB range starting at 0 */
93 @@ -361,6 +416,7 @@
94 * later cannot be changed
95 */
96 ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
97 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
98 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
99
100 /* Inbound 2GB range starting at 0 */
101 @@ -402,6 +458,7 @@
102 * later cannot be changed
103 */
104 ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
105 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
106 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
107
108 /* Inbound 2GB range starting at 0 */
This page took 0.051748 seconds and 5 git commands to generate.