target/linux/magicbox-2.6/patches/001-magicbox_support.patch

   1 diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/Kconfig linux-2.6.17-owrt/arch/ppc/platforms/4xx/Kconfig
   2 --- linux-2.6.17/arch/ppc/platforms/4xx/Kconfig 2006-06-18 03:49:35.000000000 +0200
   3 +++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/Kconfig    2006-08-25 23:33:05.000000000 +0200
   4 @@ -52,6 +52,12 @@
   5         help
   6           This option enables support for the IBM PPC405GP evaluation board.
   7
   8 +config MAGICBOX
   9 +       bool "MagicBox"
  10 +       select WANT_EARLY_SERIAL
  11 +       help
  12 +         This option enables support for the IBM PPC405EP evaluation board.
  13 +
  14  config XILINX_ML300
  15         bool "Xilinx-ML300"
  16         help
  17 @@ -173,7 +179,7 @@
  18
  19  config IBM_OCP
  20         bool
  21 -       depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
  22 +       depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT || MAGICBOX
  23         default y
  24
  25  config IBM_EMAC4
  26 @@ -183,7 +189,7 @@
  27
  28  config BIOS_FIXUP
  29         bool
  30 -       depends on BUBINGA || EP405 || SYCAMORE || WALNUT
  31 +       depends on BUBINGA || EP405 || SYCAMORE || WALNUT || MAGICBOX
  32         default y
  33
  34  # OAK doesn't exist but wanted to keep this around for any future 403GCX boards
  35 @@ -194,7 +200,7 @@
  36
  37  config 405EP
  38         bool
  39 -       depends on BUBINGA
  40 +       depends on BUBINGA || MAGICBOX
  41         default y
  42
  43  config 405GP
  44 diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/magicbox.c linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.c
  45 --- linux-2.6.17/arch/ppc/platforms/4xx/magicbox.c      1970-01-01 01:00:00.000000000 +0100
  46 +++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.c 2006-08-25 23:33:05.000000000 +0200
  47 @@ -0,0 +1,249 @@
  48 +/*
  49 + * Support for IBM PPC 405EP-based MagicBox board
  50 + * Copyright (C) 2006  Karol Lewandowski
  51 + *
  52 + * Heavily based on bubinga.c
  53 + *
  54 + * Author: SAW (IBM), derived from walnut.c.
  55 + *         Maintained by MontaVista Software <source@mvista.com>
  56 + *
  57 + * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
  58 + * terms of the GNU General Public License version 2. This program is
  59 + * licensed "as is" without any warranty of any kind, whether express
  60 + * or implied.
  61 + */
  62 +
  63 +#include <linux/config.h>
  64 +#include <linux/init.h>
  65 +#include <linux/smp.h>
  66 +#include <linux/threads.h>
  67 +#include <linux/param.h>
  68 +#include <linux/string.h>
  69 +#include <linux/blkdev.h>
  70 +#include <linux/pci.h>
  71 +#include <linux/tty.h>
  72 +#include <linux/serial.h>
  73 +#include <linux/serial_core.h>
  74 +
  75 +#include <asm/system.h>
  76 +#include <asm/pci-bridge.h>
  77 +#include <asm/processor.h>
  78 +#include <asm/machdep.h>
  79 +#include <asm/page.h>
  80 +#include <asm/time.h>
  81 +#include <asm/io.h>
  82 +#include <asm/kgdb.h>
  83 +#include <asm/ocp.h>
  84 +#include <asm/ibm_ocp_pci.h>
  85 +
  86 +#include <platforms/4xx/ibm405ep.h>
  87 +
  88 +#undef DEBUG
  89 +
  90 +#ifdef DEBUG
  91 +#define DBG(x...) printk(x)
  92 +#else
  93 +#define DBG(x...)
  94 +#endif
  95 +
  96 +extern bd_t __res;
  97 +
  98 +/* Some IRQs unique to board
  99 + * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
 100 + */
 101 +int __init
 102 +ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 103 +{
 104 +       static char pci_irq_table[][4] =
 105 +           /*
 106 +            *      PCI IDSEL/INTPIN->INTLINE
 107 +            *      A       B       C       D
 108 +            */
 109 +       {
 110 +               {28, 28, 28, 28},       /* IDSEL 1 - PCI slot 1 */
 111 +               {29, 29, 29, 29},       /* IDSEL 2 - PCI slot 2 */
 112 +               {30, 30, 30, 30},       /* IDSEL 3 - PCI slot 3 */
 113 +               {31, 31, 31, 31},       /* IDSEL 4 - PCI slot 4 */
 114 +       };
 115 +
 116 +       const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
 117 +       return PCI_IRQ_TABLE_LOOKUP;
 118 +};
 119 +
 120 +
 121 +/* The serial clock for the chip is an internal clock determined by
 122 + * different clock speeds/dividers.
 123 + * Calculate the proper input baud rate and setup the serial driver.
 124 + */
 125 +static void __init
 126 +magicbox_early_serial_map(void)
 127 +{
 128 +       u32 uart_div;
 129 +       int uart_clock;
 130 +       struct uart_port port;
 131 +
 132 +         /* Calculate the serial clock input frequency
 133 +          *
 134 +          * The base baud is the PLL OUTA (provided in the board info
 135 +          * structure) divided by the external UART Divisor, divided
 136 +          * by 16.
 137 +          */
 138 +       uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
 139 +       uart_clock = __res.bi_procfreq / uart_div;
 140 +
 141 +       /* Setup serial port access */
 142 +       memset(&port, 0, sizeof(port));
 143 +       port.membase = (void*)ACTING_UART0_IO_BASE;
 144 +       port.irq = ACTING_UART0_INT;
 145 +       port.uartclk = uart_clock;
 146 +       port.regshift = 0;
 147 +       port.iotype = SERIAL_IO_MEM;
 148 +       port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
 149 +       port.line = 0;
 150 +
 151 +       if (early_serial_setup(&port) != 0) {
 152 +               printk("Early serial init of port 0 failed\n");
 153 +       }
 154 +
 155 +       port.membase = (void*)ACTING_UART1_IO_BASE;
 156 +       port.irq = ACTING_UART1_INT;
 157 +       port.line = 1;
 158 +
 159 +       if (early_serial_setup(&port) != 0) {
 160 +               printk("Early serial init of port 1 failed\n");
 161 +       }
 162 +}
 163 +
 164 +void __init
 165 +bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
 166 +{
 167 +       unsigned int bar_response, bar;
 168 +       /*
 169 +        * Expected PCI mapping:
 170 +        *
 171 +        *  PLB addr             PCI memory addr
 172 +        *  ---------------------       ---------------------
 173 +        *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
 174 +        *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
 175 +        *
 176 +        *  PLB addr             PCI io addr
 177 +        *  ---------------------       ---------------------
 178 +        *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
 179 +        *
 180 +        * The following code is simplified by assuming that the bootrom
 181 +        * has been well behaved in following this mapping.
 182 +        */
 183 +
 184 +#ifdef DEBUG
 185 +       int i;
 186 +
 187 +       printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
 188 +       printk("PCI bridge regs before fixup \n");
 189 +       for (i = 0; i <= 3; i++) {
 190 +               printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
 191 +               printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
 192 +               printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
 193 +               printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
 194 +       }
 195 +       printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
 196 +       printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
 197 +       printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
 198 +       printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
 199 +
 200 +#endif
 201 +
 202 +       /* added for IBM boot rom version 1.15 bios bar changes  -AK */
 203 +
 204 +       /* Disable region first */
 205 +       out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
 206 +       /* PLB starting addr, PCI: 0x80000000 */
 207 +       out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
 208 +       /* PCI start addr, 0x80000000 */
 209 +       out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
 210 +       /* 512MB range of PLB to PCI */
 211 +       out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
 212 +       /* Enable no pre-fetch, enable region */
 213 +       out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
 214 +                                               (PPC405_PCI_UPPER_MEM -
 215 +                                                PPC405_PCI_MEM_BASE)) | 0x01));
 216 +
 217 +       /* Disable region one */
 218 +       out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
 219 +       out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
 220 +       out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
 221 +       out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
 222 +       out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
 223 +       out_le32((void *) &(pcip->ptm1ms), 0x00000001);
 224 +
 225 +       /* Disable region two */
 226 +       out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
 227 +       out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
 228 +       out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
 229 +       out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
 230 +       out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
 231 +       out_le32((void *) &(pcip->ptm2ms), 0x00000000);
 232 +       out_le32((void *) &(pcip->ptm2la), 0x00000000);
 233 +
 234 +       /* Zero config bars */
 235 +       for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
 236 +               early_write_config_dword(hose, hose->first_busno,
 237 +                                        PCI_FUNC(hose->first_busno), bar,
 238 +                                        0x00000000);
 239 +               early_read_config_dword(hose, hose->first_busno,
 240 +                                       PCI_FUNC(hose->first_busno), bar,
 241 +                                       &bar_response);
 242 +               DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
 243 +                   hose->first_busno, PCI_SLOT(hose->first_busno),
 244 +                   PCI_FUNC(hose->first_busno), bar, bar_response);
 245 +       }
 246 +       /* end work arround */
 247 +
 248 +#ifdef DEBUG
 249 +       printk("PCI bridge regs after fixup \n");
 250 +       for (i = 0; i <= 3; i++) {
 251 +               printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
 252 +               printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
 253 +               printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
 254 +               printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
 255 +       }
 256 +       printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
 257 +       printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
 258 +       printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
 259 +       printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
 260 +
 261 +#endif /* DEBUG */
 262 +}
 263 +
 264 +void __init
 265 +magicbox_setup_arch(void)
 266 +{
 267 +       ppc4xx_setup_arch();
 268 +
 269 +       ibm_ocp_set_emac(0, 1);
 270 +
 271 +       magicbox_early_serial_map();
 272 +
 273 +       /* Identify the system */
 274 +       printk("MagicBox port (C) 2005 Karol Lewandowski <kl@jasmine.eu.org>\n");
 275 +}
 276 +
 277 +void __init
 278 +magicbox_map_io(void)
 279 +{
 280 +       ppc4xx_map_io();
 281 +}
 282 +
 283 +void __init
 284 +platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 285 +             unsigned long r6, unsigned long r7)
 286 +{
 287 +       ppc4xx_init(r3, r4, r5, r6, r7);
 288 +
 289 +       ppc_md.setup_arch = magicbox_setup_arch;
 290 +       ppc_md.setup_io_mappings = magicbox_map_io;
 291 +
 292 +#ifdef CONFIG_KGDB
 293 +       ppc_md.early_serial_map = bubinga_early_serial_map;
 294 +#endif
 295 +
 296 +}
 297 diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/magicbox.h linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.h
 298 --- linux-2.6.17/arch/ppc/platforms/4xx/magicbox.h      1970-01-01 01:00:00.000000000 +0100
 299 +++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/magicbox.h 2006-08-25 23:33:05.000000000 +0200
 300 @@ -0,0 +1,47 @@
 301 +/*
 302 + * Support for IBM PPC 405EP-based MagicBox board
 303 + *
 304 + * Heavily based on bubinga.h
 305 + *
 306 + *
 307 + * Author: SAW (IBM), derived from walnut.h.
 308 + *         Maintained by MontaVista Software <source@mvista.com>
 309 + *
 310 + * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
 311 + * terms of the GNU General Public License version 2. This program is
 312 + * licensed "as is" without any warranty of any kind, whether express
 313 + * or implied.
 314 + */
 315 +
 316 +#ifdef __KERNEL__
 317 +#ifndef __MAGICBOX_H__
 318 +#define __MAGICBOX_H__
 319 +
 320 +#include <linux/config.h>
 321 +#include <platforms/4xx/ibm405ep.h>
 322 +#include <asm/ppcboot.h>
 323 +
 324 +/* Memory map for the "MagicBox" 405EP evaluation board -- generic 4xx. */
 325 +
 326 +/* The UART clock is based off an internal clock -
 327 + * define BASE_BAUD based on the internal clock and divider(s).
 328 + * Since BASE_BAUD must be a constant, we will initialize it
 329 + * using clock/divider values which OpenBIOS initializes
 330 + * for typical configurations at various CPU speeds.
 331 + * The base baud is calculated as (FWDA / EXT UART DIV / 16)
 332 + */
 333 +#define BASE_BAUD       0
 334 +
 335 +/* Flash */
 336 +#define PPC40x_FPGA_BASE       0xF0300000
 337 +#define PPC40x_FPGA_REG_OFFS   1       /* offset to flash map reg */
 338 +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
 339 +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
 340 +#define PPC40x_FLASH_LOW       0xFFF00000
 341 +#define PPC40x_FLASH_HIGH      0xFFF80000
 342 +#define PPC40x_FLASH_SIZE      0x80000
 343 +
 344 +#define PPC4xx_MACHINE_NAME    "MagicBox"
 345 +
 346 +#endif /* __MAGICBOX_H__ */
 347 +#endif /* __KERNEL__ */
 348 diff -Nur linux-2.6.17/arch/ppc/platforms/4xx/Makefile linux-2.6.17-owrt/arch/ppc/platforms/4xx/Makefile
 349 --- linux-2.6.17/arch/ppc/platforms/4xx/Makefile        2006-06-18 03:49:35.000000000 +0200
 350 +++ linux-2.6.17-owrt/arch/ppc/platforms/4xx/Makefile   2006-08-25 23:33:05.000000000 +0200
 351 @@ -13,6 +13,7 @@
 352  obj-$(CONFIG_REDWOOD_6)                += redwood6.o
 353  obj-$(CONFIG_SYCAMORE)         += sycamore.o
 354  obj-$(CONFIG_WALNUT)           += walnut.o
 355 +obj-$(CONFIG_MAGICBOX)         += magicbox.o
 356  obj-$(CONFIG_XILINX_ML300)     += xilinx_ml300.o
 357  obj-$(CONFIG_XILINX_ML403)     += xilinx_ml403.o
 358
 359 diff -Nur linux-2.6.17/drivers/mtd/maps/Kconfig linux-2.6.17-owrt/drivers/mtd/maps/Kconfig
 360 --- linux-2.6.17/drivers/mtd/maps/Kconfig       2006-06-18 03:49:35.000000000 +0200
 361 +++ linux-2.6.17-owrt/drivers/mtd/maps/Kconfig  2006-08-25 23:33:05.000000000 +0200
 362 @@ -323,6 +323,15 @@
 363           Walnut board. If you have one of these boards and would like to
 364           use the flash chips on it, say 'Y'.
 365
 366 +config MTD_MAGICMAP
 367 +       tristate "Flash device mapped on IBM 405EP MagicBox"
 368 +       depends on MTD_CFI && MTD_PARTITIONS && 40x && MAGICBOX
 369 +       help
 370 +         This enables access routines for the flash chips on the IBM 405EP
 371 +         MagicBox board. If you have one of these boards and would like to
 372 +         use the flash chips on it, say 'Y'.
 373 +
 374 +
 375  config MTD_EBONY
 376         tristate "Flash devices mapped on IBM 440GP Ebony"
 377         depends on MTD_JEDECPROBE && EBONY
 378 diff -Nur linux-2.6.17/drivers/mtd/maps/magicmap.c linux-2.6.17-owrt/drivers/mtd/maps/magicmap.c
 379 --- linux-2.6.17/drivers/mtd/maps/magicmap.c    1970-01-01 01:00:00.000000000 +0100
 380 +++ linux-2.6.17-owrt/drivers/mtd/maps/magicmap.c       2006-08-25 23:33:05.000000000 +0200
 381 @@ -0,0 +1,102 @@
 382 +/*
 383 + * magicmap.c: Copyleft 2005  Karol Lewandowski
 384 + *
 385 + * Mapping for MagicBox flash.
 386 + * Based on walnut.c.
 387 + *
 388 + * Heikki Lindholm <holindho@infradead.org>
 389 + *
 390 + *
 391 + * This program is free software; you can redistribute  it and/or modify it
 392 + * under  the terms of  the GNU General  Public License as published by the
 393 + * Free Software Foundation;  either version 2 of the  License, or (at your
 394 + * option) any later version.
 395 + */
 396 +
 397 +#include <linux/module.h>
 398 +#include <linux/types.h>
 399 +#include <linux/kernel.h>
 400 +#include <linux/init.h>
 401 +#include <linux/mtd/mtd.h>
 402 +#include <linux/mtd/map.h>
 403 +#include <linux/mtd/partitions.h>
 404 +#include <linux/config.h>
 405 +#include <asm/io.h>
 406 +
 407 +static struct mtd_info *flash;
 408 +
 409 +static struct map_info magic_map = {
 410 +       .name =         "Magically mapped flash",
 411 +       .phys =         0xffc00000,
 412 +       .size =         0x400000,
 413 +       .bankwidth =    2,
 414 +};
 415 +
 416 +static struct mtd_partition magic_partitions[] = {
 417 +       {
 418 +               .name =   "kernel",
 419 +               .offset = 0x0,
 420 +               .size =   0x0e0000,
 421 +       },
 422 +       {
 423 +               .name =   "ramdisk",
 424 +               .offset = 0x0e0000,
 425 +               .size =   0x2c0000,
 426 +       },
 427 +       {
 428 +               .name =   "persistent",
 429 +               .offset = 0x3a0000,
 430 +               .size =   0x020000,
 431 +       },
 432 +       {
 433 +               .name =   "bootloader",
 434 +               .offset = 0x3c0000,
 435 +               .size =   0x040000,
 436 +               .mask_flags = MTD_WRITEABLE,
 437 +       },
 438 +};
 439 +
 440 +int __init init_magic(void)
 441 +{
 442 +       magic_map.virt =
 443 +               (void __iomem *)ioremap(magic_map.phys, magic_map.size);
 444 +
 445 +       if (!magic_map.virt) {
 446 +               printk("Failed to ioremap flash.\n");
 447 +               return -EIO;
 448 +       }
 449 +
 450 +       simple_map_init(&magic_map);
 451 +
 452 +       flash = do_map_probe("cfi_probe", &magic_map);
 453 +       if (flash) {
 454 +               flash->owner = THIS_MODULE;
 455 +               add_mtd_partitions(flash, magic_partitions,
 456 +                                       ARRAY_SIZE(magic_partitions));
 457 +       } else {
 458 +               printk("map probe failed for flash\n");
 459 +               return -ENXIO;
 460 +       }
 461 +
 462 +       return 0;
 463 +}
 464 +
 465 +static void __exit cleanup_magic(void)
 466 +{
 467 +       if (flash) {
 468 +               del_mtd_partitions(flash);
 469 +               map_destroy(flash);
 470 +       }
 471 +
 472 +       if (magic_map.virt) {
 473 +               iounmap((void *)magic_map.virt);
 474 +               magic_map.virt = NULL;
 475 +       }
 476 +}
 477 +
 478 +module_init(init_magic);
 479 +module_exit(cleanup_magic);
 480 +
 481 +MODULE_LICENSE("GPL");
 482 +MODULE_AUTHOR("Karol Lewandowski");
 483 +MODULE_DESCRIPTION("MTD map and partitions for IBM 405EP MagicBox boards");
 484 diff -Nur linux-2.6.17/drivers/mtd/maps/Makefile linux-2.6.17-owrt/drivers/mtd/maps/Makefile
 485 --- linux-2.6.17/drivers/mtd/maps/Makefile      2006-06-18 03:49:35.000000000 +0200
 486 +++ linux-2.6.17-owrt/drivers/mtd/maps/Makefile 2006-08-25 23:33:05.000000000 +0200
 487 @@ -58,6 +58,7 @@
 488  obj-$(CONFIG_MTD_BEECH)                += beech-mtd.o
 489  obj-$(CONFIG_MTD_ARCTIC)       += arctic-mtd.o
 490  obj-$(CONFIG_MTD_WALNUT)        += walnut.o
 491 +obj-$(CONFIG_MTD_MAGICMAP)      += magicmap.o
 492  obj-$(CONFIG_MTD_H720X)                += h720x-flash.o
 493  obj-$(CONFIG_MTD_SBC8240)      += sbc8240.o
 494  obj-$(CONFIG_MTD_NOR_TOTO)     += omap-toto-flash.o
 495 diff -Nur linux-2.6.17/include/asm-ppc/ibm4xx.h linux-2.6.17-owrt/include/asm-ppc/ibm4xx.h
 496 --- linux-2.6.17/include/asm-ppc/ibm4xx.h       2006-06-18 03:49:35.000000000 +0200
 497 +++ linux-2.6.17-owrt/include/asm-ppc/ibm4xx.h  2006-08-25 23:33:05.000000000 +0200
 498 @@ -19,6 +19,10 @@
 499
 500  #ifdef CONFIG_40x
 501
 502 +#if defined(CONFIG_MAGICBOX)
 503 +#include <platforms/4xx/magicbox.h>
 504 +#endif
 505 +
 506  #if defined(CONFIG_BUBINGA)
 507  #include <platforms/4xx/bubinga.h>
 508  #endif