[package] add Marvell orion watchdog timer module

[openwrt.git] / target / linux / ar71xx / patches-2.6.32 / 202-spi_vsc7385_driver.patch

diff --git a/target/linux/ar71xx/patches-2.6.32/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.32/202-spi_vsc7385_driver.patch
index a4b4595..1cc6453 100644 (file)
--- a/target/linux/ar71xx/patches-2.6.32/202-spi_vsc7385_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.32/202-spi_vsc7385_driver.patch
@@ -1,8 +1,8 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig

-@@ -296,6 +296,11 @@ config SPI_TLE62X0
-         sysfs interface, with each line presented as a kind of GPIO
-         exposing both switch control and diagnostic feedback.
+@@ -309,6 +309,11 @@ config SPI_RB4XX_CPLD
+         SPI driver for the Xilinx CPLD chip present on the
+         MikroTik RB4xx boards.

  
 +config SPI_VSC7385
 +      tristate "Vitesse VSC7385 ethernet switch driver"
  
 +config SPI_VSC7385
 +      tristate "Vitesse VSC7385 ethernet switch driver"


@@ -14,9 +14,9 @@
  #
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
  #
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile

-@@ -40,6 +40,7 @@ obj-$(CONFIG_SPI_STMP3XXX)           += spi_stmp.
- 
+@@ -42,6 +42,7 @@ obj-$(CONFIG_SPI_STMP3XXX)           += spi_stmp.

  # SPI protocol drivers (device/link on bus)
  # SPI protocol drivers (device/link on bus)

+ obj-$(CONFIG_SPI_RB4XX_CPLD)  += spi_rb4xx_cpld.o

  obj-$(CONFIG_SPI_SPIDEV)      += spidev.o
 +obj-$(CONFIG_SPI_VSC7385)     += spi_vsc7385.o
  obj-$(CONFIG_SPI_TLE62X0)     += tle62x0.o
  obj-$(CONFIG_SPI_SPIDEV)      += spidev.o
 +obj-$(CONFIG_SPI_VSC7385)     += spi_vsc7385.o
  obj-$(CONFIG_SPI_TLE62X0)     += tle62x0.o