ramips: rt305x: add support for the Netcore NW718 board

[openwrt.git] / target / linux / ar71xx / base-files / etc / defconfig / tl-wr1043nd / network

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/tl-wr1043nd/network b/target/linux/ar71xx/base-files/etc/defconfig/tl-wr1043nd/network
index 7e710f2..5d142c5 100644 (file)
--- a/target/linux/ar71xx/base-files/etc/defconfig/tl-wr1043nd/network
+++ b/target/linux/ar71xx/base-files/etc/defconfig/tl-wr1043nd/network
@@ -1,31 +1,31 @@
 config 'interface' 'loopback'
-       option 'ifname'   'lo'
-       option 'proto'    'static'
-       option 'ipaddr'   '127.0.0.1'
-       option 'netmask'  '255.0.0.0'
+       option 'ifname' 'lo'
+       option 'proto'  'static'
+       option 'ipaddr' '127.0.0.1'
+       option 'netmask' '255.0.0.0'
 
 config 'interface' 'lan'
-        option 'ifname'   'eth0.1'
-        option 'type'     'bridge'
-        option 'proto'    'static'
-        option 'ipaddr'   '192.168.1.1'
-        option 'netmask'  '255.255.255.0'
+       option 'ifname' 'eth0.1'
+       option 'type'   'bridge'
+       option 'proto'  'static'
+       option 'ipaddr' '192.168.1.1'
+       option 'netmask' '255.255.255.0'
 
 config 'interface' 'wan'
-        option 'ifname' 'eth0.2'
-        option 'proto' 'dhcp'
+       option 'ifname' 'eth0.2'
+       option 'proto' 'dhcp'
 
 config 'switch'
        option 'name' 'rtl8366rb'
-        option 'reset' '1'
-        option 'enable_vlan' '1'
+       option 'reset' '1'
+       option 'enable_vlan' '1'
 
 config 'switch_vlan'
-        option 'device' 'rtl8366rb'
-        option 'vlan' '1'
-        option 'ports' '1 2 3 4 5t'
+       option 'device' 'rtl8366rb'
+       option 'vlan' '1'
+       option 'ports' '1 2 3 4 5t'
 
 config 'switch_vlan'
-        option 'device' 'rtl8366rb'
-        option 'vlan' '2'
-        option 'ports' '0 5t'
+       option 'device' 'rtl8366rb'
+       option 'vlan' '2'
+       option 'ports' '0 5t'