mofi3500-3gn)
status_led="mofi3500-3gn:green:status"
;;
+ nw718)
+ status_led="nw718:amber:cpu"
+ ;;
pwh2004)
status_led="pwh2004:green:power"
;;
hw550-3g | \
mofi3500-3gn | \
pwh2004 | \
+ nw718 | \
rt-n15 | \
v22rw-2x2 | \
wcr150gn | \
*"MoFi Network MOFI3500-3GN")
name="mofi3500-3gn"
;;
+ *"NW718")
+ name="nw718"
+ ;;
*"PWH2004")
name="pwh2004"
;;
[ "$ARGC" -gt 1 ] && return 1
case "$board" in
- dir-300-b1 | dir-600-b1 | dir-600-b2 | fonera20n | rt-g32-b1 | v22rw-2x2 | whr-g300n | hw550-3g | mofi3500-3gn)
+ dir-300-b1 | dir-600-b1 | dir-600-b2 | fonera20n | nw718 | rt-g32-b1 | v22rw-2x2 | whr-g300n | hw550-3g | mofi3500-3gn)
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1
RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */
RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */
RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */
+ RAMIPS_MACH_NW718, /* Netcore NW718 */
/* RT3052 based machines */
RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
+config RT305X_MACH_NW718
+ bool "Netcore NW718"
+ default y
+ select RALINK_DEV_GPIO_BUTTONS
+ select RALINK_DEV_GPIO_LEDS
+
config RT305X_MACH_PWH2004
bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"
default y
obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o
obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o
obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN) += mach-mofi3500-3gn.o
+obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o
obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o
obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
--- /dev/null
+/*
+ * Netcore NW718 board support
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define NW718_GPIO_LED_USB 8
+#define NW718_GPIO_LED_CPU 13
+#define NW718_GPIO_LED_WPS 14
+
+#define NW718_GPIO_BUTTON_WPS 0
+#define NW718_GPIO_BUTTON_RESET 10
+
+#define NW718_GPIO_SPI_CS0 3
+#define NW718_GPIO_SPI_SCK 4
+#define NW718_GPIO_SPI_MOSI 5
+#define NW718_GPIO_SPI_MISO 6
+
+#define NW718_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition nw718_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "config",
+ .offset = 0x030000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "factory",
+ .offset = 0x050000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x060000,
+ .size = 0x090000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x150000,
+ .size = 0x2b0000,
+ }, {
+ .name = "firmware",
+ .offset = 0x060000,
+ .size = 0x3a0000,
+ }
+};
+#define nw718_nr_parts ARRAY_SIZE(nw718_partitions)
+#else
+#define nw718_nr_parts 0
+#define nw718_partitions NULL
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data nw718_flash_data = {
+ .nr_parts = nw718_nr_parts,
+ .parts = nw718_partitions,
+};
+
+static struct gpio_led nw718_leds_gpio[] __initdata = {
+ {
+ .name = "nw718:amber:cpu",
+ .gpio = NW718_GPIO_LED_CPU,
+ .active_low = 1,
+ }, {
+ .name = "nw718:amber:usb",
+ .gpio = NW718_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "nw718:amber:wps",
+ .gpio = NW718_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button nw718_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ .gpio = NW718_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .threshold = 3,
+ .gpio = NW718_GPIO_BUTTON_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct spi_board_info nw718_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .platform_data = &nw718_flash_data,
+ .controller_data = (void *) NW718_GPIO_SPI_CS0,
+ }
+};
+
+static void __init nw718_init(void)
+{
+ rt305x_gpio_init(RT305X_GPIO_MODE_I2C |
+ RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
+ rt305x_register_ethernet();
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(nw718_leds_gpio),
+ nw718_leds_gpio);
+ ramips_register_gpio_buttons(-1, NW718_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(nw718_gpio_buttons),
+ nw718_gpio_buttons);
+ rt305x_register_wifi();
+ rt305x_register_wdt();
+ rt305x_register_spi(nw718_spi_info, ARRAY_SIZE(nw718_spi_info));
+}
+
+MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "NW718", "Netcore NW718", nw718_init);
fi; fi
endef
+define BuildFirmware/NW718
+ $(call PatchKernelLzma,$(2),$(3) $($(4)))
+ mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
+ -n "ARA1B4NCRNW718;1" \
+ -d "$(KDIR)/vmlinux-$(2).bin.lzma" \
+ "$(KDIR)/vmlinux-$(2).uImage"
+ if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
+ echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
+ else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
+ echo "Warning: $(KDIR)/root.$(1) is too big"; \
+ else \
+ ( \
+ dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
+ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
+ ) > $(call imgname,$(1),$(2))-factory.bin; \
+ fi; fi
+endef
+
mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
define Image/Build/Template/GENERIC_4M
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_4M,851968,3014656)
-o $(call imgname,$(1),$(2))-factory.bin
endef
+mtdlayout_nw718=mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,832k(kernel),2880k(rootfs),3712k@0x60000(firmware)
+define Image/Build/Template/NW718
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
+ $(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
+endef
+
define Image/Build/Profile/DIR300B1
$(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
$(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
$(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
endef
+define Image/Build/Profile/NW718
+ $(call Image/Build/Template/NW718,$(1),nw718,NW718)
+endef
+
define Image/Build/Profile/PWH2004
$(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
endef
$(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/V22RW2X2,$(1))
+ $(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))
CONFIG_RT305X_MACH_FONERA20N=y
CONFIG_RT305X_MACH_HW550_3G=y
CONFIG_RT305X_MACH_MOFI3500_3GN=y
+CONFIG_RT305X_MACH_NW718=y
CONFIG_RT305X_MACH_PWH2004=y
CONFIG_RT305X_MACH_RT_G32_REVB=y
CONFIG_RT305X_MACH_V22RW_2X2=y
projects / openwrt.git / commitdiff