[scripts] env: colorize git output

[openwrt.git] / target / linux / ar71xx / patches-3.2 / 610-MIPS-ath79-openwrt-machines.patch

diff --git a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
index 9927f6d..425b698 100644 (file)
--- a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,17 +16,79 @@
+@@ -16,17 +16,81 @@
  
  enum ath79_mach_type {
        ATH79_MACH_GENERIC = 0,
@@ -18,6 +18,7 @@
        ATH79_MACH_PB44,                /* Atheros PB44 reference board */
 +      ATH79_MACH_DIR_600_A1,          /* D-Link DIR-600 rev. A1 */
 +      ATH79_MACH_DIR_615_C1,          /* D-Link DIR-615 rev. C1 */
++      ATH79_MACH_DIR_615_E4,          /* D-Link DIR-615 rev. E4 */
 +      ATH79_MACH_DIR_825_B1,          /* D-Link DIR-825 rev. B1 */
 +      ATH79_MACH_EAP7660D,            /* Senao EAP7660D */
 +      ATH79_MACH_JA76PF,              /* jjPlus JA76PF */
@@ -40,6 +41,7 @@
 +      ATH79_MACH_RB_750,              /* MikroTik RouterBOARD 750 */
 +      ATH79_MACH_RW2458N,             /* Redwave RW2458N */
 +      ATH79_MACH_TEW_632BRP,          /* TRENDnet TEW-632BRP */
++      ATH79_MACH_TL_MR11U,            /* TP-LINK TL-MR11U */
 +      ATH79_MACH_TL_MR3020,           /* TP-LINK TL-MR3020 */
 +      ATH79_MACH_TL_MR3220,           /* TP-LINK TL-MR3220 */
 +      ATH79_MACH_TL_MR3420,           /* TP-LINK TL-MR3420 */
@@ -186,7 +188,7 @@
  config ATH79_MACH_PB44
        bool "Atheros PB44 reference board"
        select SOC_AR71XX
-@@ -54,6 +137,359 @@ config ATH79_MACH_PB44
+@@ -54,6 +137,369 @@ config ATH79_MACH_PB44
          Say 'Y' here if you want your kernel to support the
          Atheros PB44 reference board.
  
@@ -276,7 +278,7 @@
 +      select MYLOADER
 +
 +config ATH79_MACH_DIR_600_A1
-+      bool "D-Link DIR-600 rev. A1 support"
++      bool "D-Link DIR-600 A1/DIR-615 E4 support"
 +      select SOC_AR724X
 +      select ATH79_DEV_AP9X_PCI if PCI
 +      select ATH79_DEV_ETH
@@ -419,6 +421,16 @@
 +      select ATH79_DEV_LEDS_GPIO
 +      select ATH79_DEV_M25P80
 +
++config ATH79_MACH_TL_MR11U
++      bool "TP-LINK TL-MR11U support"
++      select SOC_AR933X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
 +config ATH79_MACH_TL_MR3020
 +      bool "TP-LINK TL-MR3020 support"
 +      select SOC_AR933X
@@ -546,7 +558,7 @@
  config ATH79_MACH_UBNT_XM
        bool "Ubiquiti Networks XM (rev 1.0) board"
        select SOC_AR724X
-@@ -67,6 +503,24 @@ config ATH79_MACH_UBNT_XM
+@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM
          Say 'Y' here if you want your kernel to support the
          Ubiquiti Networks XM (rev 1.0) board.
  
@@ -571,7 +583,7 @@
  endmenu
  
  config SOC_AR71XX
-@@ -96,10 +550,6 @@ config SOC_AR934X
+@@ -96,10 +560,6 @@ config SOC_AR934X
        select PCI_AR724X if PCI
        def_bool n
  
@@ -582,7 +594,7 @@
  config ATH79_DEV_AP9X_PCI
        select ATH79_PCI_ATH9K_FIXUP
        def_bool n
-@@ -110,7 +560,14 @@ config ATH79_DEV_DSA
+@@ -110,7 +570,14 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
        def_bool n
  
@@ -598,7 +610,7 @@
        def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -135,4 +592,7 @@ config ATH79_NVRAM
+@@ -135,4 +602,7 @@ config ATH79_NVRAM
  config ATH79_PCI_ATH9K_FIXUP
        def_bool n
  
@@ -608,7 +620,7 @@
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -36,8 +36,55 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
+@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
  #
  # Machines
  #
@@ -640,6 +652,7 @@
 +obj-$(CONFIG_ATH79_MACH_RB750)                += mach-rb750.o
 +obj-$(CONFIG_ATH79_MACH_RW2458N)      += mach-rw2458n.o
 +obj-$(CONFIG_ATH79_MACH_TEW_632BRP)   += mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TL_MR11U)     += mach-tl-mr11u.o
 +obj-$(CONFIG_ATH79_MACH_TL_MR3020)    += mach-tl-mr3020.o
 +obj-$(CONFIG_ATH79_MACH_TL_MR3X20)    += mach-tl-mr3x20.o
 +obj-$(CONFIG_ATH79_MACH_TL_WA901ND)   += mach-tl-wa901nd.o