-diff -purN linux_2.6.24_org/arch/x86/Kconfig linux_2.6.24_olpc/arch/x86/Kconfig
---- linux_2.6.24_org/arch/x86/Kconfig 2008-02-15 20:11:57.000000000 +0000
-+++ linux_2.6.24_olpc/arch/x86/Kconfig 2008-02-15 18:59:21.000000000 +0000
+Index: linux-2.6.24.7/arch/x86/Kconfig
+===================================================================
+--- linux-2.6.24.7.orig/arch/x86/Kconfig
++++ linux-2.6.24.7/arch/x86/Kconfig
@@ -1415,6 +1415,9 @@ config PCI_GODIRECT
config PCI_GOANY
bool "Any"
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
-diff -purN linux_2.6.24_org/arch/x86/kernel/Makefile_32 linux_2.6.24_olpc/arch/x86/kernel/Makefile_32
---- linux_2.6.24_org/arch/x86/kernel/Makefile_32 2008-02-15 20:11:58.000000000 +0000
-+++ linux_2.6.24_olpc/arch/x86/kernel/Makefile_32 2008-02-15 18:59:25.000000000 +0000
-@@ -49,6 +49,13 @@ obj-y += pcspeaker.o
+Index: linux-2.6.24.7/arch/x86/kernel/Makefile_32
+===================================================================
+--- linux-2.6.24.7.orig/arch/x86/kernel/Makefile_32
++++ linux-2.6.24.7/arch/x86/kernel/Makefile_32
+@@ -50,6 +50,13 @@ obj-y += pcspeaker.o
obj-$(CONFIG_SCx200) += scx200_32.o
# vsyscall_32.o contains the vsyscall DSO images as __initdata.
# We must build both images before we can assemble it.
# Note: kbuild does not track this dependency due to usage of .incbin
-diff -purN linux_2.6.24_org/arch/x86/kernel/ofw.c linux_2.6.24_olpc/arch/x86/kernel/ofw.c
---- linux_2.6.24_org/arch/x86/kernel/ofw.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/arch/x86/kernel/ofw.c 2008-02-15 18:59:25.000000000 +0000
+Index: linux-2.6.24.7/arch/x86/kernel/ofw.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/arch/x86/kernel/ofw.c
@@ -0,0 +1,100 @@
+/*
+ * ofw.c - Open Firmware client interface for 32-bit systems.
+ return retval;
+}
+EXPORT_SYMBOL(ofw);
-diff -purN linux_2.6.24_org/arch/x86/kernel/olpc.c linux_2.6.24_olpc/arch/x86/kernel/olpc.c
---- linux_2.6.24_org/arch/x86/kernel/olpc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/arch/x86/kernel/olpc.c 2008-02-15 18:59:25.000000000 +0000
+Index: linux-2.6.24.7/arch/x86/kernel/olpc.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/arch/x86/kernel/olpc.c
@@ -0,0 +1,287 @@
+/* Support for the OLPC DCON and OLPC EC access
+ * Copyright (C) 2006, Advanced Micro Devices, Inc.
+}
+
+postcore_initcall(olpc_init);
-diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-pm.c linux_2.6.24_olpc/arch/x86/kernel/olpc-pm.c
---- linux_2.6.24_org/arch/x86/kernel/olpc-pm.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/arch/x86/kernel/olpc-pm.c 2008-02-15 18:59:26.000000000 +0000
+Index: linux-2.6.24.7/arch/x86/kernel/olpc-pm.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/arch/x86/kernel/olpc-pm.c
@@ -0,0 +1,946 @@
+/* olpc-pm.c
+ * © 2006 Red Hat, Inc.
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1");
-diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-sleep.S linux_2.6.24_olpc/arch/x86/kernel/olpc-sleep.S
---- linux_2.6.24_org/arch/x86/kernel/olpc-sleep.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/arch/x86/kernel/olpc-sleep.S 2008-02-15 18:59:26.000000000 +0000
+Index: linux-2.6.24.7/arch/x86/kernel/olpc-sleep.S
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/arch/x86/kernel/olpc-sleep.S
@@ -0,0 +1,39 @@
+.text
+
+
+
+
-diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-wakeup.S linux_2.6.24_olpc/arch/x86/kernel/olpc-wakeup.S
---- linux_2.6.24_org/arch/x86/kernel/olpc-wakeup.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/arch/x86/kernel/olpc-wakeup.S 2008-02-15 18:59:25.000000000 +0000
+Index: linux-2.6.24.7/arch/x86/kernel/olpc-wakeup.S
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/arch/x86/kernel/olpc-wakeup.S
@@ -0,0 +1,133 @@
+.text
+#include <linux/linkage.h>
+saved_cr4: .long 0
+saved_cr0: .long 0
+
-diff -purN linux_2.6.24_org/arch/x86/kernel/prom.c linux_2.6.24_olpc/arch/x86/kernel/prom.c
---- linux_2.6.24_org/arch/x86/kernel/prom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/arch/x86/kernel/prom.c 2008-02-15 18:59:26.000000000 +0000
+Index: linux-2.6.24.7/arch/x86/kernel/prom.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/arch/x86/kernel/prom.c
@@ -0,0 +1,478 @@
+/*
+ * Procedures for creating, accessing and interpreting the device tree.
+ printk("PROM: Built device tree with %u bytes of memory.\n",
+ prom_early_allocated);
+}
-diff -purN linux_2.6.24_org/arch/x86/pci/olpc.c linux_2.6.24_olpc/arch/x86/pci/olpc.c
---- linux_2.6.24_org/arch/x86/pci/olpc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/arch/x86/pci/olpc.c 2008-02-15 18:59:22.000000000 +0000
+Index: linux-2.6.24.7/arch/x86/pci/olpc.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/arch/x86/pci/olpc.c
@@ -0,0 +1,298 @@
+/*
+ * olpcpci.c - Low-level PCI config space access for OLPC systems
+ raw_pci_ops = &pci_olpc_conf;
+ is_lx = is_geode_lx();
+}
-diff -purN linux_2.6.24_org/Documentation/kernel-parameters.txt linux_2.6.24_olpc/Documentation/kernel-parameters.txt
---- linux_2.6.24_org/Documentation/kernel-parameters.txt 2008-02-15 20:12:29.000000000 +0000
-+++ linux_2.6.24_olpc/Documentation/kernel-parameters.txt 2008-02-15 18:59:54.000000000 +0000
+Index: linux-2.6.24.7/Documentation/kernel-parameters.txt
+===================================================================
+--- linux-2.6.24.7.orig/Documentation/kernel-parameters.txt
++++ linux-2.6.24.7/Documentation/kernel-parameters.txt
@@ -1244,6 +1244,13 @@ and is between 256 and 4096 characters.
nr_uarts= [SERIAL] maximum number of UARTs to be registered.
opl3= [HW,OSS]
Format: <io>
-diff -purN linux_2.6.24_org/drivers/base/dd.c linux_2.6.24_olpc/drivers/base/dd.c
---- linux_2.6.24_org/drivers/base/dd.c 2008-02-15 20:11:29.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/base/dd.c 2008-02-15 18:58:46.000000000 +0000
+Index: linux-2.6.24.7/drivers/base/dd.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/base/dd.c
++++ linux-2.6.24.7/drivers/base/dd.c
@@ -293,7 +293,6 @@ static void __device_release_driver(stru
if (drv) {
driver_sysfs_remove(dev);
put_driver(drv);
}
}
-diff -purN linux_2.6.24_org/drivers/char/vt_ioctl.c linux_2.6.24_olpc/drivers/char/vt_ioctl.c
---- linux_2.6.24_org/drivers/char/vt_ioctl.c 2008-02-15 20:11:48.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/char/vt_ioctl.c 2008-02-15 18:59:11.000000000 +0000
+Index: linux-2.6.24.7/drivers/char/vt_ioctl.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/char/vt_ioctl.c
++++ linux-2.6.24.7/drivers/char/vt_ioctl.c
@@ -38,6 +38,9 @@
char vt_dont_switch;
extern struct tty_driver *console_driver;
/*
* explicitly blank/unblank the screen if switching modes
*/
-diff -purN linux_2.6.24_org/drivers/i2c/busses/scx200_acb.c linux_2.6.24_olpc/drivers/i2c/busses/scx200_acb.c
---- linux_2.6.24_org/drivers/i2c/busses/scx200_acb.c 2008-02-15 20:11:33.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/i2c/busses/scx200_acb.c 2008-02-15 18:58:49.000000000 +0000
+Index: linux-2.6.24.7/drivers/i2c/busses/scx200_acb.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/i2c/busses/scx200_acb.c
++++ linux-2.6.24.7/drivers/i2c/busses/scx200_acb.c
@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820,
module_param_array(base, int, NULL, 0);
MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
pr_debug(NAME ": ACBCTL2 readback failed\n");
return -ENXIO;
}
-diff -purN linux_2.6.24_org/drivers/input/keyboard/atkbd.c linux_2.6.24_olpc/drivers/input/keyboard/atkbd.c
---- linux_2.6.24_org/drivers/input/keyboard/atkbd.c 2008-02-15 20:11:51.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/input/keyboard/atkbd.c 2008-02-15 18:59:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/input/keyboard/atkbd.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/input/keyboard/atkbd.c
++++ linux-2.6.24.7/drivers/input/keyboard/atkbd.c
@@ -63,12 +63,25 @@ static int atkbd_extra;
module_param_named(extra, atkbd_extra, bool, 0);
MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
if (!atkbd || !drv) {
printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
return -1;
-diff -purN linux_2.6.24_org/drivers/input/mouse/Kconfig linux_2.6.24_olpc/drivers/input/mouse/Kconfig
---- linux_2.6.24_org/drivers/input/mouse/Kconfig 2008-02-15 20:11:51.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/input/mouse/Kconfig 2008-02-15 18:59:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/input/mouse/Kconfig
+===================================================================
+--- linux-2.6.24.7.orig/drivers/input/mouse/Kconfig
++++ linux-2.6.24.7/drivers/input/mouse/Kconfig
@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT
If unsure, say N.
config MOUSE_SERIAL
tristate "Serial mouse"
select SERIO
-diff -purN linux_2.6.24_org/drivers/input/mouse/Makefile linux_2.6.24_olpc/drivers/input/mouse/Makefile
---- linux_2.6.24_org/drivers/input/mouse/Makefile 2008-02-15 20:11:51.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/input/mouse/Makefile 2008-02-15 18:59:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/input/mouse/Makefile
+===================================================================
+--- linux-2.6.24.7.orig/drivers/input/mouse/Makefile
++++ linux-2.6.24.7/drivers/input/mouse/Makefile
@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) +=
psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o
psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o
psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
+psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o
-diff -purN linux_2.6.24_org/drivers/input/mouse/olpc.c linux_2.6.24_olpc/drivers/input/mouse/olpc.c
---- linux_2.6.24_org/drivers/input/mouse/olpc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/input/mouse/olpc.c 2008-02-15 18:59:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/input/mouse/olpc.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/input/mouse/olpc.c
@@ -0,0 +1,837 @@
+/*
+ * OLPC touchpad PS/2 mouse driver
+ }
+ return 0;
+}
-diff -purN linux_2.6.24_org/drivers/input/mouse/olpc.h linux_2.6.24_olpc/drivers/input/mouse/olpc.h
---- linux_2.6.24_org/drivers/input/mouse/olpc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/input/mouse/olpc.h 2008-02-15 18:59:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/input/mouse/olpc.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/input/mouse/olpc.h
@@ -0,0 +1,78 @@
+/*
+ * OLPC touchpad PS/2 mouse driver
+#endif
+
+#endif
-diff -purN linux_2.6.24_org/drivers/input/mouse/psmouse-base.c linux_2.6.24_olpc/drivers/input/mouse/psmouse-base.c
---- linux_2.6.24_org/drivers/input/mouse/psmouse-base.c 2008-02-15 20:11:51.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/input/mouse/psmouse-base.c 2008-02-15 18:59:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/input/mouse/psmouse-base.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/input/mouse/psmouse-base.c
++++ linux-2.6.24.7/drivers/input/mouse/psmouse-base.c
@@ -26,6 +26,7 @@
#include "synaptics.h"
#include "logips2pp.h"
{
.type = PSMOUSE_CORTRON,
.name = "CortronPS/2",
-diff -purN linux_2.6.24_org/drivers/input/mouse/psmouse.h linux_2.6.24_olpc/drivers/input/mouse/psmouse.h
---- linux_2.6.24_org/drivers/input/mouse/psmouse.h 2008-02-15 20:11:51.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/input/mouse/psmouse.h 2008-02-15 18:59:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/input/mouse/psmouse.h
+===================================================================
+--- linux-2.6.24.7.orig/drivers/input/mouse/psmouse.h
++++ linux-2.6.24.7/drivers/input/mouse/psmouse.h
@@ -88,6 +88,7 @@ enum psmouse_type {
PSMOUSE_LIFEBOOK,
PSMOUSE_TRACKPOINT,
struct psmouse_attribute {
struct device_attribute dattr;
-diff -purN linux_2.6.24_org/drivers/input/serio/i8042.c linux_2.6.24_olpc/drivers/input/serio/i8042.c
---- linux_2.6.24_org/drivers/input/serio/i8042.c 2008-02-15 20:11:51.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/input/serio/i8042.c 2008-02-15 18:59:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/input/serio/i8042.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/input/serio/i8042.c
++++ linux-2.6.24.7/drivers/input/serio/i8042.c
@@ -874,6 +874,11 @@ static long i8042_panic_blink(long count
#undef DELAY
error = i8042_controller_selftest();
if (error)
-diff -purN linux_2.6.24_org/drivers/input/serio/serio.c linux_2.6.24_olpc/drivers/input/serio/serio.c
---- linux_2.6.24_org/drivers/input/serio/serio.c 2008-02-15 20:11:51.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/input/serio/serio.c 2008-02-15 18:59:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/input/serio/serio.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/input/serio/serio.c
++++ linux-2.6.24.7/drivers/input/serio/serio.c
@@ -910,11 +910,22 @@ static int serio_uevent(struct device *d
#endif /* CONFIG_HOTPLUG */
dev->power.power_state = state;
}
-diff -purN linux_2.6.24_org/drivers/Kconfig linux_2.6.24_olpc/drivers/Kconfig
---- linux_2.6.24_org/drivers/Kconfig 2008-02-15 20:11:21.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/Kconfig 2008-02-15 18:58:34.000000000 +0000
+Index: linux-2.6.24.7/drivers/Kconfig
+===================================================================
+--- linux-2.6.24.7.orig/drivers/Kconfig
++++ linux-2.6.24.7/drivers/Kconfig
@@ -94,6 +94,8 @@ source "drivers/auxdisplay/Kconfig"
source "drivers/kvm/Kconfig"
source "drivers/uio/Kconfig"
source "drivers/virtio/Kconfig"
-diff -purN linux_2.6.24_org/drivers/Makefile linux_2.6.24_olpc/drivers/Makefile
---- linux_2.6.24_org/drivers/Makefile 2008-02-15 20:11:24.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/Makefile 2008-02-15 18:58:43.000000000 +0000
+Index: linux-2.6.24.7/drivers/Makefile
+===================================================================
+--- linux-2.6.24.7.orig/drivers/Makefile
++++ linux-2.6.24.7/drivers/Makefile
@@ -23,6 +23,8 @@ obj-y += char/
obj-$(CONFIG_CONNECTOR) += connector/
# i810fb and intelfb depend on char/agp/
obj-$(CONFIG_FB_I810) += video/i810/
obj-$(CONFIG_FB_INTEL) += video/intelfb/
-diff -purN linux_2.6.24_org/drivers/media/video/cafe_ccic.c linux_2.6.24_olpc/drivers/media/video/cafe_ccic.c
---- linux_2.6.24_org/drivers/media/video/cafe_ccic.c 2008-02-15 20:11:25.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/media/video/cafe_ccic.c 2008-02-15 18:58:44.000000000 +0000
+Index: linux-2.6.24.7/drivers/media/video/cafe_ccic.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/media/video/cafe_ccic.c
++++ linux-2.6.24.7/drivers/media/video/cafe_ccic.c
@@ -372,6 +372,10 @@ static int cafe_smbus_write_data(struct
rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
cafe_reg_write(cam, REG_TWSIC1, rval);
set_bit(CF_CONFIG_NEEDED, &cam->flags);
if (cam->state == S_SPECREAD)
cam->state = S_IDLE; /* Don't bother restarting */
-diff -purN linux_2.6.24_org/drivers/misc/Kconfig linux_2.6.24_olpc/drivers/misc/Kconfig
---- linux_2.6.24_org/drivers/misc/Kconfig 2008-02-15 20:11:42.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/misc/Kconfig 2008-02-15 18:58:52.000000000 +0000
+Index: linux-2.6.24.7/drivers/misc/Kconfig
+===================================================================
+--- linux-2.6.24.7.orig/drivers/misc/Kconfig
++++ linux-2.6.24.7/drivers/misc/Kconfig
@@ -219,6 +219,11 @@ config THINKPAD_ACPI_BAY
If you are not sure, say Y here.
config ATMEL_SSC
tristate "Device driver for Atmel SSC peripheral"
-diff -purN linux_2.6.24_org/drivers/mmc/card/block.c linux_2.6.24_olpc/drivers/mmc/card/block.c
---- linux_2.6.24_org/drivers/mmc/card/block.c 2008-02-15 20:11:13.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/mmc/card/block.c 2008-02-15 18:58:17.000000000 +0000
+Index: linux-2.6.24.7/drivers/mmc/card/block.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/mmc/card/block.c
++++ linux-2.6.24.7/drivers/mmc/card/block.c
@@ -237,6 +237,13 @@ static int mmc_blk_issue_rq(struct mmc_q
if (brq.data.blocks > card->host->max_blk_count)
brq.data.blocks = card->host->max_blk_count;
/*
* If the host doesn't support multiple block writes, force
* block writes to single block. SD cards are excepted from
-diff -purN linux_2.6.24_org/drivers/mmc/host/sdhci.c linux_2.6.24_olpc/drivers/mmc/host/sdhci.c
---- linux_2.6.24_org/drivers/mmc/host/sdhci.c 2008-02-15 20:11:13.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/mmc/host/sdhci.c 2008-02-15 18:58:17.000000000 +0000
+Index: linux-2.6.24.7/drivers/mmc/host/sdhci.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/mmc/host/sdhci.c
++++ linux-2.6.24.7/drivers/mmc/host/sdhci.c
@@ -441,6 +441,12 @@ static void sdhci_prepare_data(struct sd
break;
}
out:
host->power = power;
}
-diff -purN linux_2.6.24_org/drivers/mtd/nand/cafe_nand.c linux_2.6.24_olpc/drivers/mtd/nand/cafe_nand.c
---- linux_2.6.24_org/drivers/mtd/nand/cafe_nand.c 2008-02-15 20:11:46.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/mtd/nand/cafe_nand.c 2008-02-15 18:58:57.000000000 +0000
+Index: linux-2.6.24.7/drivers/mtd/nand/cafe_nand.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/mtd/nand/cafe_nand.c
++++ linux-2.6.24.7/drivers/mtd/nand/cafe_nand.c
@@ -11,6 +11,7 @@
#undef DEBUG
#include <linux/mtd/mtd.h>
goto out;
out_irq:
-diff -purN linux_2.6.24_org/drivers/mtd/redboot.c linux_2.6.24_olpc/drivers/mtd/redboot.c
---- linux_2.6.24_org/drivers/mtd/redboot.c 2008-02-15 20:11:46.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/mtd/redboot.c 2008-02-15 18:58:58.000000000 +0000
+Index: linux-2.6.24.7/drivers/mtd/redboot.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/mtd/redboot.c
++++ linux-2.6.24.7/drivers/mtd/redboot.c
@@ -59,16 +59,31 @@ static int parse_redboot_partitions(stru
static char nullstring[] = "unallocated";
#endif
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
master->name, offset);
-diff -purN linux_2.6.24_org/drivers/net/forcedeth.c linux_2.6.24_olpc/drivers/net/forcedeth.c
---- linux_2.6.24_org/drivers/net/forcedeth.c 2008-02-15 20:11:19.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/net/forcedeth.c 2008-02-15 18:58:33.000000000 +0000
+Index: linux-2.6.24.7/drivers/net/forcedeth.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/net/forcedeth.c
++++ linux-2.6.24.7/drivers/net/forcedeth.c
@@ -3559,11 +3559,13 @@ static int nv_request_irq(struct net_dev
}
if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
np->msi_flags &= ~NV_MSI_ENABLED;
}
}
-diff -purN linux_2.6.24_org/drivers/pci/quirks.c linux_2.6.24_olpc/drivers/pci/quirks.c
---- linux_2.6.24_org/drivers/pci/quirks.c 2008-02-15 20:11:33.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/pci/quirks.c 2008-02-15 18:58:50.000000000 +0000
-@@ -1359,6 +1359,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+Index: linux-2.6.24.7/drivers/pci/quirks.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/pci/quirks.c
++++ linux-2.6.24.7/drivers/pci/quirks.c
+@@ -1360,6 +1360,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
/*
* Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
* but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
* Re-allocate the region if needed...
-diff -purN linux_2.6.24_org/drivers/power/ds2760_battery.c linux_2.6.24_olpc/drivers/power/ds2760_battery.c
---- linux_2.6.24_org/drivers/power/ds2760_battery.c 2008-02-15 20:11:45.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/power/ds2760_battery.c 2008-02-15 18:58:56.000000000 +0000
+Index: linux-2.6.24.7/drivers/power/ds2760_battery.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/power/ds2760_battery.c
++++ linux-2.6.24.7/drivers/power/ds2760_battery.c
@@ -409,6 +409,7 @@ static int ds2760_battery_suspend(struct
struct ds2760_device_info *di = platform_get_drvdata(pdev);
return 0;
}
-diff -purN linux_2.6.24_org/drivers/power/olpc_battery.c linux_2.6.24_olpc/drivers/power/olpc_battery.c
---- linux_2.6.24_org/drivers/power/olpc_battery.c 2008-02-15 20:11:45.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/power/olpc_battery.c 2008-02-15 18:58:56.000000000 +0000
+Index: linux-2.6.24.7/drivers/power/olpc_battery.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/power/olpc_battery.c
++++ linux-2.6.24.7/drivers/power/olpc_battery.c
@@ -14,12 +14,13 @@
#include <linux/power_supply.h>
#include <linux/jiffies.h>
power_supply_unregister(&olpc_bat);
power_supply_unregister(&olpc_ac);
platform_device_unregister(bat_pdev);
-diff -purN linux_2.6.24_org/drivers/power/power_supply_sysfs.c linux_2.6.24_olpc/drivers/power/power_supply_sysfs.c
---- linux_2.6.24_org/drivers/power/power_supply_sysfs.c 2008-02-15 20:11:45.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/power/power_supply_sysfs.c 2008-02-15 18:58:56.000000000 +0000
+Index: linux-2.6.24.7/drivers/power/power_supply_sysfs.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/power/power_supply_sysfs.c
++++ linux-2.6.24.7/drivers/power/power_supply_sysfs.c
@@ -114,9 +114,11 @@ static struct device_attribute power_sup
POWER_SUPPLY_ATTR(time_to_empty_avg),
POWER_SUPPLY_ATTR(time_to_full_now),
};
static ssize_t power_supply_show_static_attrs(struct device *dev,
-diff -purN linux_2.6.24_org/drivers/serial/serial_core.c linux_2.6.24_olpc/drivers/serial/serial_core.c
---- linux_2.6.24_org/drivers/serial/serial_core.c 2008-02-15 20:11:33.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/serial/serial_core.c 2008-02-15 18:58:51.000000000 +0000
+Index: linux-2.6.24.7/drivers/serial/serial_core.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/serial/serial_core.c
++++ linux-2.6.24.7/drivers/serial/serial_core.c
@@ -2013,6 +2013,7 @@ int uart_suspend_port(struct uart_driver
int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
{
port->ops->set_termios(port, &termios, NULL);
console_start(port->cons);
}
-diff -purN linux_2.6.24_org/drivers/sysprof/config.h linux_2.6.24_olpc/drivers/sysprof/config.h
---- linux_2.6.24_org/drivers/sysprof/config.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/sysprof/config.h 2008-02-15 18:58:59.000000000 +0000
+Index: linux-2.6.24.7/drivers/sysprof/config.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/sysprof/config.h
@@ -0,0 +1,23 @@
+/* config.h. Generated by configure. */
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "1.0.8"
-diff -purN linux_2.6.24_org/drivers/sysprof/Kconfig linux_2.6.24_olpc/drivers/sysprof/Kconfig
---- linux_2.6.24_org/drivers/sysprof/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/sysprof/Kconfig 2008-02-15 18:58:59.000000000 +0000
+Index: linux-2.6.24.7/drivers/sysprof/Kconfig
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/sysprof/Kconfig
@@ -0,0 +1,12 @@
+
+menu "Sysprof"
+ sysprof-module, to generate stacktraces which are then interpreted by
+ the userspace program "sysprof".
+endmenu
-diff -purN linux_2.6.24_org/drivers/sysprof/Makefile linux_2.6.24_olpc/drivers/sysprof/Makefile
---- linux_2.6.24_org/drivers/sysprof/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/sysprof/Makefile 2008-02-15 18:58:59.000000000 +0000
+Index: linux-2.6.24.7/drivers/sysprof/Makefile
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/sysprof/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SYSPROF) += sysprof-module.o
-diff -purN linux_2.6.24_org/drivers/sysprof/sysprof-module.c linux_2.6.24_olpc/drivers/sysprof/sysprof-module.c
---- linux_2.6.24_org/drivers/sysprof/sysprof-module.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/sysprof/sysprof-module.c 2008-02-15 18:58:59.000000000 +0000
+Index: linux-2.6.24.7/drivers/sysprof/sysprof-module.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/sysprof/sysprof-module.c
@@ -0,0 +1,271 @@
+/* -*- c-basic-offset: 8 -*- */
+
+ printk(KERN_ALERT "sysprof: unloaded\n");
+}
+
-diff -purN linux_2.6.24_org/drivers/sysprof/sysprof-module.h linux_2.6.24_olpc/drivers/sysprof/sysprof-module.h
---- linux_2.6.24_org/drivers/sysprof/sysprof-module.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/sysprof/sysprof-module.h 2008-02-15 18:58:59.000000000 +0000
+Index: linux-2.6.24.7/drivers/sysprof/sysprof-module.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/sysprof/sysprof-module.h
@@ -0,0 +1,37 @@
+/* Sysprof -- Sampling, systemwide CPU profiler
+ * Copyright 2004, Red Hat, Inc.
+};
+
+#endif
-diff -purN linux_2.6.24_org/drivers/usb/core/driver.c linux_2.6.24_olpc/drivers/usb/core/driver.c
---- linux_2.6.24_org/drivers/usb/core/driver.c 2008-02-15 20:11:09.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/usb/core/driver.c 2008-02-15 18:58:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/usb/core/driver.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/usb/core/driver.c
++++ linux-2.6.24.7/drivers/usb/core/driver.c
@@ -1062,8 +1062,15 @@ static int usb_suspend_both(struct usb_d
break;
}
/* If the suspend failed, resume interfaces that did get suspended */
if (status != 0) {
-diff -purN linux_2.6.24_org/drivers/usb/core/quirks.c linux_2.6.24_olpc/drivers/usb/core/quirks.c
---- linux_2.6.24_org/drivers/usb/core/quirks.c 2008-02-15 20:11:09.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/usb/core/quirks.c 2008-02-15 18:58:12.000000000 +0000
-@@ -45,6 +45,9 @@ static const struct usb_device_id usb_qu
+Index: linux-2.6.24.7/drivers/usb/core/quirks.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/usb/core/quirks.c
++++ linux-2.6.24.7/drivers/usb/core/quirks.c
+@@ -48,6 +48,9 @@ static const struct usb_device_id usb_qu
/* SKYMEDI USB_DRIVE */
{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
{ } /* terminating entry must be last */
};
-diff -purN linux_2.6.24_org/drivers/usb/core/usb.h linux_2.6.24_olpc/drivers/usb/core/usb.h
---- linux_2.6.24_org/drivers/usb/core/usb.h 2008-02-15 20:11:09.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/usb/core/usb.h 2008-02-15 18:58:14.000000000 +0000
+Index: linux-2.6.24.7/drivers/usb/core/usb.h
+===================================================================
+--- linux-2.6.24.7.orig/drivers/usb/core/usb.h
++++ linux-2.6.24.7/drivers/usb/core/usb.h
@@ -41,6 +41,7 @@ extern void usb_host_cleanup(void);
extern void usb_autosuspend_work(struct work_struct *work);
extern int usb_port_suspend(struct usb_device *dev);
extern int usb_external_suspend_device(struct usb_device *udev,
pm_message_t msg);
extern int usb_external_resume_device(struct usb_device *udev);
-diff -purN linux_2.6.24_org/drivers/usb/host/ehci-hcd.c linux_2.6.24_olpc/drivers/usb/host/ehci-hcd.c
---- linux_2.6.24_org/drivers/usb/host/ehci-hcd.c 2008-02-15 20:11:09.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/usb/host/ehci-hcd.c 2008-02-15 18:58:12.000000000 +0000
+Index: linux-2.6.24.7/drivers/usb/host/ehci-hcd.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/usb/host/ehci-hcd.c
++++ linux-2.6.24.7/drivers/usb/host/ehci-hcd.c
@@ -653,9 +653,16 @@ static irqreturn_t ehci_irq (struct usb_
/* complete the unlinking of some qh [4.15.2.3] */
}
/* remote wakeup [4.3.1] */
-diff -purN linux_2.6.24_org/drivers/usb/host/ehci-hub.c linux_2.6.24_olpc/drivers/usb/host/ehci-hub.c
---- linux_2.6.24_org/drivers/usb/host/ehci-hub.c 2008-02-15 20:11:09.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/usb/host/ehci-hub.c 2008-02-15 18:58:12.000000000 +0000
+Index: linux-2.6.24.7/drivers/usb/host/ehci-hub.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/usb/host/ehci-hub.c
++++ linux-2.6.24.7/drivers/usb/host/ehci-hub.c
@@ -132,10 +132,15 @@ static int ehci_bus_suspend (struct usb_
ehci_quiesce (ehci);
hcd->state = HC_STATE_QUIESCING;
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
-diff -purN linux_2.6.24_org/drivers/usb/host/ehci-pci.c linux_2.6.24_olpc/drivers/usb/host/ehci-pci.c
---- linux_2.6.24_org/drivers/usb/host/ehci-pci.c 2008-02-15 20:11:09.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/usb/host/ehci-pci.c 2008-02-15 18:58:12.000000000 +0000
+Index: linux-2.6.24.7/drivers/usb/host/ehci-pci.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/usb/host/ehci-pci.c
++++ linux-2.6.24.7/drivers/usb/host/ehci-pci.c
@@ -247,6 +247,9 @@ static int ehci_pci_suspend(struct usb_h
rc = -EINVAL;
goto bail;
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
-diff -purN linux_2.6.24_org/drivers/usb/host/ehci-q.c linux_2.6.24_olpc/drivers/usb/host/ehci-q.c
---- linux_2.6.24_org/drivers/usb/host/ehci-q.c 2008-02-15 20:11:09.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/usb/host/ehci-q.c 2008-02-15 18:58:12.000000000 +0000
+Index: linux-2.6.24.7/drivers/usb/host/ehci-q.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/usb/host/ehci-q.c
++++ linux-2.6.24.7/drivers/usb/host/ehci-q.c
@@ -177,7 +177,7 @@ static int qtd_copy_status (
if (QTD_CERR (token))
status = -EPIPE;
timer_action_done (ehci, TIMER_IAA_WATCHDOG);
// qh->hw_next = cpu_to_hc32(qh->qh_dma);
-diff -purN linux_2.6.24_org/drivers/usb/host/ohci-pci.c linux_2.6.24_olpc/drivers/usb/host/ohci-pci.c
---- linux_2.6.24_org/drivers/usb/host/ohci-pci.c 2008-02-15 20:11:09.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/usb/host/ohci-pci.c 2008-02-15 18:58:12.000000000 +0000
+Index: linux-2.6.24.7/drivers/usb/host/ohci-pci.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/usb/host/ohci-pci.c
++++ linux-2.6.24.7/drivers/usb/host/ohci-pci.c
@@ -317,6 +317,8 @@ static int ohci_pci_resume (struct usb_h
/* FIXME: we should try to detect loss of VBUS power here */
prepare_for_handover(hcd);
return 0;
}
-diff -purN linux_2.6.24_org/drivers/usb/storage/usb.c linux_2.6.24_olpc/drivers/usb/storage/usb.c
---- linux_2.6.24_org/drivers/usb/storage/usb.c 2008-02-15 20:11:09.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/usb/storage/usb.c 2008-02-15 18:58:11.000000000 +0000
+Index: linux-2.6.24.7/drivers/usb/storage/usb.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/usb/storage/usb.c
++++ linux-2.6.24.7/drivers/usb/storage/usb.c
@@ -244,7 +244,7 @@ static int storage_pre_reset(struct usb_
return 0;
}
}
/*
-diff -purN linux_2.6.24_org/drivers/video/fbmem.c linux_2.6.24_olpc/drivers/video/fbmem.c
---- linux_2.6.24_org/drivers/video/fbmem.c 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/fbmem.c 2008-02-15 18:58:42.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/fbmem.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/fbmem.c
++++ linux-2.6.24.7/drivers/video/fbmem.c
@@ -820,6 +820,53 @@ static void try_to_load(int fb)
#endif /* CONFIG_KMOD */
fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
{
struct fb_fix_screeninfo *fix = &info->fix;
-diff -purN linux_2.6.24_org/drivers/video/geode/display_gx.c linux_2.6.24_olpc/drivers/video/geode/display_gx.c
---- linux_2.6.24_org/drivers/video/geode/display_gx.c 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/display_gx.c 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/display_gx.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/display_gx.c
++++ linux-2.6.24.7/drivers/video/geode/display_gx.c
@@ -11,26 +11,44 @@
* Free Software Foundation; either version 2 of the License, or * (at your
* option) any later version.
par->vid_ops->configure_display(info);
-diff -purN linux_2.6.24_org/drivers/video/geode/display_gx.h linux_2.6.24_olpc/drivers/video/geode/display_gx.h
---- linux_2.6.24_org/drivers/video/geode/display_gx.h 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/display_gx.h 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/display_gx.h
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/display_gx.h
++++ linux-2.6.24.7/drivers/video/geode/display_gx.h
@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops;
#define GLD_MSR_CONFIG 0xC0002001
#define GLD_MSR_CONFIG_DM_FP 0x40
/* Display controller registers */
#define DC_UNLOCK 0x00
-diff -purN linux_2.6.24_org/drivers/video/geode/geodefb.h linux_2.6.24_olpc/drivers/video/geode/geodefb.h
---- linux_2.6.24_org/drivers/video/geode/geodefb.h 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/geodefb.h 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/geodefb.h
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/geodefb.h
++++ linux-2.6.24.7/drivers/video/geode/geodefb.h
@@ -12,6 +12,10 @@
#ifndef __GEODEFB_H__
#define __GEODEFB_H__
};
#endif /* !__GEODEFB_H__ */
-diff -purN linux_2.6.24_org/drivers/video/geode/geode_regs.h linux_2.6.24_olpc/drivers/video/geode/geode_regs.h
---- linux_2.6.24_org/drivers/video/geode/geode_regs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/video/geode/geode_regs.h 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/geode_regs.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/video/geode/geode_regs.h
@@ -0,0 +1,255 @@
+/* This header file defines the registers and suspend/resume
+ structures for the Geode GX and LX. The lxfb driver defines
+};
+
+#endif
-diff -purN linux_2.6.24_org/drivers/video/geode/gxfb_core.c linux_2.6.24_olpc/drivers/video/geode/gxfb_core.c
---- linux_2.6.24_org/drivers/video/geode/gxfb_core.c 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/gxfb_core.c 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/gxfb_core.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/gxfb_core.c
++++ linux-2.6.24.7/drivers/video/geode/gxfb_core.c
@@ -30,12 +30,31 @@
#include <linux/fb.h>
#include <linux/init.h>
+
MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
MODULE_LICENSE("GPL");
-diff -purN linux_2.6.24_org/drivers/video/geode/Kconfig linux_2.6.24_olpc/drivers/video/geode/Kconfig
---- linux_2.6.24_org/drivers/video/geode/Kconfig 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/Kconfig 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/Kconfig
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/Kconfig
++++ linux-2.6.24.7/drivers/video/geode/Kconfig
@@ -38,26 +38,6 @@ config FB_GEODE_GX
If unsure, say N.
config FB_GEODE_GX1
tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)"
depends on FB && FB_GEODE && EXPERIMENTAL
-diff -purN linux_2.6.24_org/drivers/video/geode/lxfb_core.c linux_2.6.24_olpc/drivers/video/geode/lxfb_core.c
---- linux_2.6.24_org/drivers/video/geode/lxfb_core.c 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/lxfb_core.c 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/lxfb_core.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/lxfb_core.c
++++ linux-2.6.24.7/drivers/video/geode/lxfb_core.c
@@ -21,7 +21,8 @@
#include <linux/fb.h>
#include <linux/init.h>
};
#ifndef MODULE
-diff -purN linux_2.6.24_org/drivers/video/geode/lxfb.h linux_2.6.24_olpc/drivers/video/geode/lxfb.h
---- linux_2.6.24_org/drivers/video/geode/lxfb.h 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/lxfb.h 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/lxfb.h
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/lxfb.h
++++ linux-2.6.24.7/drivers/video/geode/lxfb.h
@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *);
void lx_get_gamma(struct fb_info *, unsigned int *, int);
void lx_set_gamma(struct fb_info *, unsigned int *, int);
#define DC_IRQ 0xC8
#define DC_IRQ_MASK (1 << 0)
-diff -purN linux_2.6.24_org/drivers/video/geode/lxfb_ops.c linux_2.6.24_olpc/drivers/video/geode/lxfb_ops.c
---- linux_2.6.24_org/drivers/video/geode/lxfb_ops.c 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/lxfb_ops.c 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/lxfb_ops.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/lxfb_ops.c
++++ linux-2.6.24.7/drivers/video/geode/lxfb_ops.c
@@ -11,11 +11,15 @@
#include <linux/kernel.h>
#include <linux/errno.h>
+ lx_power_on = 1;
return 0;
}
-diff -purN linux_2.6.24_org/drivers/video/geode/Makefile linux_2.6.24_olpc/drivers/video/geode/Makefile
---- linux_2.6.24_org/drivers/video/geode/Makefile 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/Makefile 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/Makefile
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/Makefile
++++ linux-2.6.24.7/drivers/video/geode/Makefile
@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o
obj-$(CONFIG_FB_GEODE_LX) += lxfb.o
-gxfb-objs := gxfb_core.o display_gx.o video_gx.o
+gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o
lxfb-objs := lxfb_core.o lxfb_ops.o
-diff -purN linux_2.6.24_org/drivers/video/geode/suspend_gx.c linux_2.6.24_olpc/drivers/video/geode/suspend_gx.c
---- linux_2.6.24_org/drivers/video/geode/suspend_gx.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/video/geode/suspend_gx.c 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/suspend_gx.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/video/geode/suspend_gx.c
@@ -0,0 +1,272 @@
+#include <linux/fb.h>
+#include <asm/io.h>
+}
+
+#endif
-diff -purN linux_2.6.24_org/drivers/video/geode/video_gx.c linux_2.6.24_olpc/drivers/video/geode/video_gx.c
---- linux_2.6.24_org/drivers/video/geode/video_gx.c 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/video_gx.c 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/video_gx.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/video_gx.c
++++ linux-2.6.24.7/drivers/video/geode/video_gx.c
@@ -16,10 +16,14 @@
#include <asm/io.h>
#include <asm/delay.h>
.configure_display = gx_configure_display,
.blank_display = gx_blank_display,
};
-diff -purN linux_2.6.24_org/drivers/video/geode/video_gx.h linux_2.6.24_olpc/drivers/video/geode/video_gx.h
---- linux_2.6.24_org/drivers/video/geode/video_gx.h 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/geode/video_gx.h 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/geode/video_gx.h
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/geode/video_gx.h
++++ linux-2.6.24.7/drivers/video/geode/video_gx.h
@@ -11,6 +11,8 @@
#ifndef __VIDEO_GX_H__
#define __VIDEO_GX_H__
+void gx_restore_regs(struct fb_info *info, struct geoderegs *regs);
+
#endif /* !__VIDEO_GX_H__ */
-diff -purN linux_2.6.24_org/drivers/video/Kconfig linux_2.6.24_olpc/drivers/video/Kconfig
---- linux_2.6.24_org/drivers/video/Kconfig 2008-02-15 20:11:22.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/Kconfig 2008-02-15 18:58:36.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/Kconfig
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/Kconfig
++++ linux-2.6.24.7/drivers/video/Kconfig
@@ -1869,6 +1869,15 @@ config FB_PS3_DEFAULT_SIZE_M
The default value can be overridden on the kernel command line
using the "ps3fb" option (e.g. "ps3fb=9M");
config FB_XILINX
tristate "Xilinx frame buffer support"
depends on FB && XILINX_VIRTEX
-diff -purN linux_2.6.24_org/drivers/video/Makefile linux_2.6.24_olpc/drivers/video/Makefile
---- linux_2.6.24_org/drivers/video/Makefile 2008-02-15 20:11:22.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/Makefile 2008-02-15 18:58:36.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/Makefile
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/Makefile
++++ linux-2.6.24.7/drivers/video/Makefile
@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx
obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
obj-$(CONFIG_FB_PS3) += ps3fb.o
obj-$(CONFIG_FB_XILINX) += xilinxfb.o
obj-$(CONFIG_FB_OMAP) += omap/
-diff -purN linux_2.6.24_org/drivers/video/modedb.c linux_2.6.24_olpc/drivers/video/modedb.c
---- linux_2.6.24_org/drivers/video/modedb.c 2008-02-15 20:11:23.000000000 +0000
-+++ linux_2.6.24_olpc/drivers/video/modedb.c 2008-02-15 18:58:41.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/modedb.c
+===================================================================
+--- linux-2.6.24.7.orig/drivers/video/modedb.c
++++ linux-2.6.24.7/drivers/video/modedb.c
@@ -33,6 +33,8 @@ const char *fb_mode_option;
* Standard video mode definitions (taken from XFree86)
*/
if (!default_bpp)
default_bpp = 8;
-diff -purN linux_2.6.24_org/drivers/video/olpc_dcon.c linux_2.6.24_olpc/drivers/video/olpc_dcon.c
---- linux_2.6.24_org/drivers/video/olpc_dcon.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/video/olpc_dcon.c 2008-02-15 18:58:42.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/olpc_dcon.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/video/olpc_dcon.c
@@ -0,0 +1,946 @@
+/*
+ * Mainly by David Woodhouse, somewhat modified by Jordan Crouse
+module_exit(olpc_dcon_exit);
+
+MODULE_LICENSE("GPL");
-Binary files linux_2.6.24_org/drivers/video/.olpc_dcon.c.swp and linux_2.6.24_olpc/drivers/video/.olpc_dcon.c.swp differ
-diff -purN linux_2.6.24_org/drivers/video/olpc_dcon.h linux_2.6.24_olpc/drivers/video/olpc_dcon.h
---- linux_2.6.24_org/drivers/video/olpc_dcon.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/drivers/video/olpc_dcon.h 2008-02-15 18:58:35.000000000 +0000
+Index: linux-2.6.24.7/drivers/video/olpc_dcon.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/drivers/video/olpc_dcon.h
@@ -0,0 +1,75 @@
+#ifndef OLPC_DCON_H_
+#define OLPC_DCON_H_
+#define DCON_IRQ 6
+
+#endif
-diff -purN linux_2.6.24_org/fs/jffs2/nodelist.h linux_2.6.24_olpc/fs/jffs2/nodelist.h
---- linux_2.6.24_org/fs/jffs2/nodelist.h 2008-02-15 20:10:35.000000000 +0000
-+++ linux_2.6.24_olpc/fs/jffs2/nodelist.h 2008-02-15 18:57:39.000000000 +0000
+Index: linux-2.6.24.7/fs/jffs2/nodelist.h
+===================================================================
+--- linux-2.6.24.7.orig/fs/jffs2/nodelist.h
++++ linux-2.6.24.7/fs/jffs2/nodelist.h
@@ -197,7 +197,7 @@ struct jffs2_inode_cache {
#define RAWNODE_CLASS_XATTR_DATUM 1
#define RAWNODE_CLASS_XATTR_REF 2
#define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size)
-diff -purN linux_2.6.24_org/fs/Kconfig linux_2.6.24_olpc/fs/Kconfig
---- linux_2.6.24_org/fs/Kconfig 2008-02-15 20:10:31.000000000 +0000
-+++ linux_2.6.24_olpc/fs/Kconfig 2008-02-15 18:57:33.000000000 +0000
+Index: linux-2.6.24.7/fs/Kconfig
+===================================================================
+--- linux-2.6.24.7.orig/fs/Kconfig
++++ linux-2.6.24.7/fs/Kconfig
@@ -1031,6 +1031,37 @@ config HUGETLBFS
config HUGETLB_PAGE
def_bool HUGETLBFS
config CONFIGFS_FS
tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)"
depends on SYSFS && EXPERIMENTAL
-diff -purN linux_2.6.24_org/fs/Makefile linux_2.6.24_olpc/fs/Makefile
---- linux_2.6.24_org/fs/Makefile 2008-02-15 20:10:33.000000000 +0000
-+++ linux_2.6.24_olpc/fs/Makefile 2008-02-15 18:57:34.000000000 +0000
+Index: linux-2.6.24.7/fs/Makefile
+===================================================================
+--- linux-2.6.24.7.orig/fs/Makefile
++++ linux-2.6.24.7/fs/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/
obj-$(CONFIG_FUSE_FS) += fuse/
obj-$(CONFIG_UDF_FS) += udf/
obj-$(CONFIG_JFS_FS) += jfs/
obj-$(CONFIG_XFS_FS) += xfs/
obj-$(CONFIG_9P_FS) += 9p/
-diff -purN linux_2.6.24_org/fs/promfs/Makefile linux_2.6.24_olpc/fs/promfs/Makefile
---- linux_2.6.24_org/fs/promfs/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/fs/promfs/Makefile 2008-02-15 18:57:33.000000000 +0000
+Index: linux-2.6.24.7/fs/promfs/Makefile
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/fs/promfs/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PROMFS_FS) += promfs.o
-diff -purN linux_2.6.24_org/fs/promfs/promfs.c linux_2.6.24_olpc/fs/promfs/promfs.c
---- linux_2.6.24_org/fs/promfs/promfs.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/fs/promfs/promfs.c 2008-02-15 18:57:33.000000000 +0000
+Index: linux-2.6.24.7/fs/promfs/promfs.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/fs/promfs/promfs.c
@@ -0,0 +1,295 @@
+/*
+ * promfs.c - generic inode/dentry functions for IEEE 1275-based filesystems.
+
+module_init(init_promfs);
+module_exit(exit_promfs);
-diff -purN linux_2.6.24_org/include/asm-x86/ofw.h linux_2.6.24_olpc/include/asm-x86/ofw.h
---- linux_2.6.24_org/include/asm-x86/ofw.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/include/asm-x86/ofw.h 2008-02-15 18:57:59.000000000 +0000
+Index: linux-2.6.24.7/include/asm-x86/ofw.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/include/asm-x86/ofw.h
@@ -0,0 +1,16 @@
+/*
+ * Definitions for Open Firmware client interface on 32-bit system.
+extern int ofw(char *, int, int, ...);
+
+#endif
-diff -purN linux_2.6.24_org/include/asm-x86/olpc.h linux_2.6.24_olpc/include/asm-x86/olpc.h
---- linux_2.6.24_org/include/asm-x86/olpc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/include/asm-x86/olpc.h 2008-02-15 18:57:59.000000000 +0000
+Index: linux-2.6.24.7/include/asm-x86/olpc.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/include/asm-x86/olpc.h
@@ -0,0 +1,107 @@
+/* OLPC machine specific definitions */
+
+
+#endif
+
-diff -purN linux_2.6.24_org/include/asm-x86/prom.h linux_2.6.24_olpc/include/asm-x86/prom.h
---- linux_2.6.24_org/include/asm-x86/prom.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/include/asm-x86/prom.h 2008-02-15 18:57:59.000000000 +0000
+Index: linux-2.6.24.7/include/asm-x86/prom.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/include/asm-x86/prom.h
@@ -0,0 +1,108 @@
+#ifndef _I386_PROM_H
+#define _I386_PROM_H
+
+#endif /* __KERNEL__ */
+#endif
-diff -purN linux_2.6.24_org/include/linux/battery.h linux_2.6.24_olpc/include/linux/battery.h
---- linux_2.6.24_org/include/linux/battery.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/include/linux/battery.h 2008-02-15 18:58:06.000000000 +0000
+Index: linux-2.6.24.7/include/linux/battery.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/include/linux/battery.h
@@ -0,0 +1,101 @@
+/*
+ * Driver model for batteries
+ssize_t battery_attribute_show_status(char *buf, unsigned long status);
+ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status);
+#endif /* __LINUX_BATTERY_H__ */
-diff -purN linux_2.6.24_org/include/linux/fb.h linux_2.6.24_olpc/include/linux/fb.h
---- linux_2.6.24_org/include/linux/fb.h 2008-02-15 20:10:55.000000000 +0000
-+++ linux_2.6.24_olpc/include/linux/fb.h 2008-02-15 18:58:01.000000000 +0000
+Index: linux-2.6.24.7/include/linux/fb.h
+===================================================================
+--- linux-2.6.24.7.orig/include/linux/fb.h
++++ linux-2.6.24.7/include/linux/fb.h
@@ -666,6 +666,12 @@ struct fb_ops {
/* restore saved state */
void (*fb_restore_state)(struct fb_info *info);
extern struct fb_info *registered_fb[FB_MAX];
extern int num_registered_fb;
extern struct class *fb_class;
-diff -purN linux_2.6.24_org/include/linux/i2c-id.h linux_2.6.24_olpc/include/linux/i2c-id.h
---- linux_2.6.24_org/include/linux/i2c-id.h 2008-02-15 20:10:52.000000000 +0000
-+++ linux_2.6.24_olpc/include/linux/i2c-id.h 2008-02-15 18:58:00.000000000 +0000
+Index: linux-2.6.24.7/include/linux/i2c-id.h
+===================================================================
+--- linux-2.6.24.7.orig/include/linux/i2c-id.h
++++ linux-2.6.24.7/include/linux/i2c-id.h
@@ -125,6 +125,7 @@
#define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */
#define I2C_DRIVERID_VP27SMPX 93 /* Panasonic VP27s tuner internal MPX */
#define I2C_DRIVERID_I2CDEV 900
#define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
-diff -purN linux_2.6.24_org/include/linux/isl_38xx.h linux_2.6.24_olpc/include/linux/isl_38xx.h
---- linux_2.6.24_org/include/linux/isl_38xx.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/include/linux/isl_38xx.h 2008-02-15 18:58:05.000000000 +0000
+Index: linux-2.6.24.7/include/linux/isl_38xx.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/include/linux/isl_38xx.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2002 Intersil Americas Inc.
+#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER 0x00000004
+
+#endif /* _LINUX_ISL_38XX_H */
-diff -purN linux_2.6.24_org/include/linux/pm.h linux_2.6.24_olpc/include/linux/pm.h
---- linux_2.6.24_org/include/linux/pm.h 2008-02-15 20:11:06.000000000 +0000
-+++ linux_2.6.24_olpc/include/linux/pm.h 2008-02-15 18:58:06.000000000 +0000
+Index: linux-2.6.24.7/include/linux/pm.h
+===================================================================
+--- linux-2.6.24.7.orig/include/linux/pm.h
++++ linux-2.6.24.7/include/linux/pm.h
@@ -178,6 +178,9 @@ struct dev_pm_info {
unsigned can_wakeup:1;
#ifdef CONFIG_PM_SLEEP
struct list_head entry;
#endif
};
-diff -purN linux_2.6.24_org/include/linux/power_supply.h linux_2.6.24_olpc/include/linux/power_supply.h
---- linux_2.6.24_org/include/linux/power_supply.h 2008-02-15 20:10:55.000000000 +0000
-+++ linux_2.6.24_olpc/include/linux/power_supply.h 2008-02-15 18:58:01.000000000 +0000
+Index: linux-2.6.24.7/include/linux/power_supply.h
+===================================================================
+--- linux-2.6.24.7.orig/include/linux/power_supply.h
++++ linux-2.6.24.7/include/linux/power_supply.h
@@ -98,9 +98,11 @@ enum power_supply_property {
POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
extern void power_supply_unregister(struct power_supply *psy);
/* For APM emulation, think legacy userspace. */
-diff -purN linux_2.6.24_org/include/linux/vt_kern.h linux_2.6.24_olpc/include/linux/vt_kern.h
---- linux_2.6.24_org/include/linux/vt_kern.h 2008-02-15 20:10:55.000000000 +0000
-+++ linux_2.6.24_olpc/include/linux/vt_kern.h 2008-02-15 18:58:02.000000000 +0000
+Index: linux-2.6.24.7/include/linux/vt_kern.h
+===================================================================
+--- linux-2.6.24.7.orig/include/linux/vt_kern.h
++++ linux-2.6.24.7/include/linux/vt_kern.h
@@ -96,4 +96,23 @@ struct vt_spawn_console {
};
extern struct vt_spawn_console vt_spawn_con;
+}
+
#endif /* _VT_KERN_H */
-diff -purN linux_2.6.24_org/include/sound/ac97_codec.h linux_2.6.24_olpc/include/sound/ac97_codec.h
---- linux_2.6.24_org/include/sound/ac97_codec.h 2008-02-15 20:10:44.000000000 +0000
-+++ linux_2.6.24_olpc/include/sound/ac97_codec.h 2008-02-15 18:57:45.000000000 +0000
+Index: linux-2.6.24.7/include/sound/ac97_codec.h
+===================================================================
+--- linux-2.6.24.7.orig/include/sound/ac97_codec.h
++++ linux-2.6.24.7/include/sound/ac97_codec.h
@@ -281,10 +281,12 @@
/* specific - Analog Devices */
#define AC97_AD_TEST 0x5a /* test register */
/* specific - Cirrus Logic */
#define AC97_CSR_ACMODE 0x5e /* AC Mode Register */
-diff -purN linux_2.6.24_org/kernel/power/console.c linux_2.6.24_olpc/kernel/power/console.c
---- linux_2.6.24_org/kernel/power/console.c 2008-02-15 20:12:34.000000000 +0000
-+++ linux_2.6.24_olpc/kernel/power/console.c 2008-02-15 19:00:00.000000000 +0000
+Index: linux-2.6.24.7/kernel/power/console.c
+===================================================================
+--- linux-2.6.24.7.orig/kernel/power/console.c
++++ linux-2.6.24.7/kernel/power/console.c
@@ -9,7 +9,7 @@
#include <linux/console.h>
#include "power.h"
#define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1)
static int orig_fgconsole, orig_kmsg;
-diff -purN linux_2.6.24_org/kernel/power/Kconfig linux_2.6.24_olpc/kernel/power/Kconfig
---- linux_2.6.24_org/kernel/power/Kconfig 2008-02-15 20:12:34.000000000 +0000
-+++ linux_2.6.24_olpc/kernel/power/Kconfig 2008-02-15 19:00:00.000000000 +0000
+Index: linux-2.6.24.7/kernel/power/Kconfig
+===================================================================
+--- linux-2.6.24.7.orig/kernel/power/Kconfig
++++ linux-2.6.24.7/kernel/power/Kconfig
@@ -37,9 +37,22 @@ config PM_DEBUG
code. This is helpful when debugging and reporting PM bugs, like
suspend support.
default n
---help---
This option enables verbose messages from the Power Management code.
-diff -purN linux_2.6.24_org/kernel/power/main.c linux_2.6.24_olpc/kernel/power/main.c
---- linux_2.6.24_org/kernel/power/main.c 2008-02-15 20:12:34.000000000 +0000
-+++ linux_2.6.24_olpc/kernel/power/main.c 2008-02-15 19:00:00.000000000 +0000
+Index: linux-2.6.24.7/kernel/power/main.c
+===================================================================
+--- linux-2.6.24.7.orig/kernel/power/main.c
++++ linux-2.6.24.7/kernel/power/main.c
@@ -76,11 +76,13 @@ static int suspend_prepare(void)
if (!suspend_ops || !suspend_ops->enter)
return -EPERM;
if (freeze_processes()) {
error = -EAGAIN;
-diff -purN linux_2.6.24_org/scripts/kconfig/conf.c linux_2.6.24_olpc/scripts/kconfig/conf.c
---- linux_2.6.24_org/scripts/kconfig/conf.c 2008-02-15 20:10:15.000000000 +0000
-+++ linux_2.6.24_olpc/scripts/kconfig/conf.c 2008-02-15 18:57:09.000000000 +0000
+Index: linux-2.6.24.7/scripts/kconfig/conf.c
+===================================================================
+--- linux-2.6.24.7.orig/scripts/kconfig/conf.c
++++ linux-2.6.24.7/scripts/kconfig/conf.c
@@ -22,6 +22,7 @@ enum {
ask_new,
ask_silent,
fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
return 1;
}
-diff -purN linux_2.6.24_org/scripts/kconfig/confdata.c linux_2.6.24_olpc/scripts/kconfig/confdata.c
---- linux_2.6.24_org/scripts/kconfig/confdata.c 2008-02-15 20:10:15.000000000 +0000
-+++ linux_2.6.24_olpc/scripts/kconfig/confdata.c 2008-02-15 18:57:09.000000000 +0000
+Index: linux-2.6.24.7/scripts/kconfig/confdata.c
+===================================================================
+--- linux-2.6.24.7.orig/scripts/kconfig/confdata.c
++++ linux-2.6.24.7/scripts/kconfig/confdata.c
@@ -393,7 +393,7 @@ int conf_read(const char *name)
return 0;
}
sym_set_change_count(0);
-diff -purN linux_2.6.24_org/scripts/kconfig/gconf.c linux_2.6.24_olpc/scripts/kconfig/gconf.c
---- linux_2.6.24_org/scripts/kconfig/gconf.c 2008-02-15 20:10:15.000000000 +0000
-+++ linux_2.6.24_olpc/scripts/kconfig/gconf.c 2008-02-15 18:57:09.000000000 +0000
+Index: linux-2.6.24.7/scripts/kconfig/gconf.c
+===================================================================
+--- linux-2.6.24.7.orig/scripts/kconfig/gconf.c
++++ linux-2.6.24.7/scripts/kconfig/gconf.c
@@ -621,7 +621,7 @@ void on_load1_activate(GtkMenuItem * men
void on_save_activate(GtkMenuItem * menuitem, gpointer user_data)
text_insert_msg(_("Error"), _("Unable to save configuration !"));
gtk_widget_destroy(GTK_WIDGET(user_data));
-diff -purN linux_2.6.24_org/scripts/kconfig/lkc_proto.h linux_2.6.24_olpc/scripts/kconfig/lkc_proto.h
---- linux_2.6.24_org/scripts/kconfig/lkc_proto.h 2008-02-15 20:10:15.000000000 +0000
-+++ linux_2.6.24_olpc/scripts/kconfig/lkc_proto.h 2008-02-15 18:57:09.000000000 +0000
+Index: linux-2.6.24.7/scripts/kconfig/lkc_proto.h
+===================================================================
+--- linux-2.6.24.7.orig/scripts/kconfig/lkc_proto.h
++++ linux-2.6.24.7/scripts/kconfig/lkc_proto.h
@@ -3,7 +3,7 @@
P(conf_parse,void,(const char *name));
P(conf_read,int,(const char *name));
P(conf_write_autoconf,int,(void));
P(conf_get_changed,bool,(void));
P(conf_set_changed_callback, void,(void (*fn)(void)));
-diff -purN linux_2.6.24_org/scripts/kconfig/Makefile linux_2.6.24_olpc/scripts/kconfig/Makefile
---- linux_2.6.24_org/scripts/kconfig/Makefile 2008-02-15 20:10:15.000000000 +0000
-+++ linux_2.6.24_olpc/scripts/kconfig/Makefile 2008-02-15 18:57:09.000000000 +0000
+Index: linux-2.6.24.7/scripts/kconfig/Makefile
+===================================================================
+--- linux-2.6.24.7.orig/scripts/kconfig/Makefile
++++ linux-2.6.24.7/scripts/kconfig/Makefile
@@ -69,6 +69,9 @@ endif
%_defconfig: $(obj)/conf
$(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig)
# Help text used by make help
help:
@echo ' config - Update current config utilising a line-oriented program'
-Binary files linux_2.6.24_org/scripts/kconfig/mconf and linux_2.6.24_olpc/scripts/kconfig/mconf differ
-diff -purN linux_2.6.24_org/scripts/kconfig/mconf.c linux_2.6.24_olpc/scripts/kconfig/mconf.c
---- linux_2.6.24_org/scripts/kconfig/mconf.c 2008-02-15 20:10:15.000000000 +0000
-+++ linux_2.6.24_olpc/scripts/kconfig/mconf.c 2008-02-15 18:57:09.000000000 +0000
+Index: linux-2.6.24.7/scripts/kconfig/mconf.c
+===================================================================
+--- linux-2.6.24.7.orig/scripts/kconfig/mconf.c
++++ linux-2.6.24.7/scripts/kconfig/mconf.c
@@ -885,7 +885,7 @@ static void conf_save(void)
case 0:
if (!dialog_input_result[0])
fprintf(stderr, _("\n\n"
"Error during writing of the kernel configuration.\n"
"Your kernel configuration changes were NOT saved."
-diff -purN linux_2.6.24_org/scripts/kconfig/qconf.cc linux_2.6.24_olpc/scripts/kconfig/qconf.cc
---- linux_2.6.24_org/scripts/kconfig/qconf.cc 2008-02-15 20:10:15.000000000 +0000
-+++ linux_2.6.24_olpc/scripts/kconfig/qconf.cc 2008-02-15 18:57:09.000000000 +0000
+Index: linux-2.6.24.7/scripts/kconfig/qconf.cc
+===================================================================
+--- linux-2.6.24.7.orig/scripts/kconfig/qconf.cc
++++ linux-2.6.24.7/scripts/kconfig/qconf.cc
@@ -1458,7 +1458,7 @@ void ConfigMainWindow::loadConfig(void)
void ConfigMainWindow::saveConfig(void)
case QMessageBox::No:
e->accept();
break;
-diff -purN linux_2.6.24_org/sound/pci/ac97/ac97_patch.c linux_2.6.24_olpc/sound/pci/ac97/ac97_patch.c
---- linux_2.6.24_org/sound/pci/ac97/ac97_patch.c 2008-02-15 20:10:24.000000000 +0000
-+++ linux_2.6.24_olpc/sound/pci/ac97/ac97_patch.c 2008-02-15 18:57:24.000000000 +0000
+Index: linux-2.6.24.7/sound/pci/ac97/ac97_patch.c
+===================================================================
+--- linux-2.6.24.7.orig/sound/pci/ac97/ac97_patch.c
++++ linux-2.6.24.7/sound/pci/ac97/ac97_patch.c
@@ -2029,8 +2029,9 @@ static const struct snd_kcontrol_new snd
.get = snd_ac97_ad1888_lohpsel_get,
.put = snd_ac97_ad1888_lohpsel_put
AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.c
---- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.c 2008-02-15 20:10:23.000000000 +0000
-+++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.c 2008-02-15 18:57:23.000000000 +0000
+Index: linux-2.6.24.7/sound/pci/cs5535audio/cs5535audio.c
+===================================================================
+--- linux-2.6.24.7.orig/sound/pci/cs5535audio/cs5535audio.c
++++ linux-2.6.24.7/sound/pci/cs5535audio/cs5535audio.c
@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac
return snd_cs5535audio_codec_read(cs5535au, reg);
}
return 0;
}
-diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.h linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.h
---- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.h 2008-02-15 20:10:23.000000000 +0000
-+++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.h 2008-02-15 18:57:23.000000000 +0000
+Index: linux-2.6.24.7/sound/pci/cs5535audio/cs5535audio.h
+===================================================================
+--- linux-2.6.24.7.orig/sound/pci/cs5535audio/cs5535audio.h
++++ linux-2.6.24.7/sound/pci/cs5535audio/cs5535audio.h
@@ -78,6 +78,7 @@ struct cs5535audio_dma {
unsigned int buf_addr, buf_bytes;
unsigned int period_bytes, periods;
int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);
#endif /* __SOUND_CS5535AUDIO_H */
-diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_olpc.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_olpc.c
---- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_olpc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_olpc.c 2008-02-15 18:57:23.000000000 +0000
+Index: linux-2.6.24.7/sound/pci/cs5535audio/cs5535audio_olpc.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24.7/sound/pci/cs5535audio/cs5535audio_olpc.c
@@ -0,0 +1,110 @@
+#include <sound/driver.h>
+#include <sound/core.h>
+ return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls,
+ ac97->private_data));
+}
-diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_pcm.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_pcm.c
---- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_pcm.c 2008-02-15 20:10:23.000000000 +0000
-+++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_pcm.c 2008-02-15 18:57:23.000000000 +0000
+Index: linux-2.6.24.7/sound/pci/cs5535audio/cs5535audio_pcm.c
+===================================================================
+--- linux-2.6.24.7.orig/sound/pci/cs5535audio/cs5535audio_pcm.c
++++ linux-2.6.24.7/sound/pci/cs5535audio/cs5535audio_pcm.c
@@ -259,6 +259,9 @@ static int snd_cs5535audio_hw_params(str
err = cs5535audio_build_dma_packets(cs5535au, dma, substream,
params_periods(hw_params),
return 0;
}
-diff -purN linux_2.6.24_org/sound/pci/cs5535audio/Makefile linux_2.6.24_olpc/sound/pci/cs5535audio/Makefile
---- linux_2.6.24_org/sound/pci/cs5535audio/Makefile 2008-02-15 20:10:23.000000000 +0000
-+++ linux_2.6.24_olpc/sound/pci/cs5535audio/Makefile 2008-02-15 18:57:23.000000000 +0000
+Index: linux-2.6.24.7/sound/pci/cs5535audio/Makefile
+===================================================================
+--- linux-2.6.24.7.orig/sound/pci/cs5535audio/Makefile
++++ linux-2.6.24.7/sound/pci/cs5535audio/Makefile
@@ -5,5 +5,9 @@
snd-cs5535audio-y := cs5535audio.o cs5535audio_pcm.o
snd-cs5535audio-$(CONFIG_PM) += cs5535audio_pm.o
-diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
-index 97b64d7..92ceab7 100644
---- a/arch/i386/Kconfig
-+++ b/arch/i386/Kconfig
+Index: linux-2.6.23.17/arch/i386/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/Kconfig
++++ linux-2.6.23.17/arch/i386/Kconfig
@@ -796,6 +796,15 @@ config SECCOMP
If unsure, say Y. Only embedded should say N here.
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
-diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
-index 9d33b00..2e2cf42 100644
---- a/arch/i386/kernel/Makefile
-+++ b/arch/i386/kernel/Makefile
+Index: linux-2.6.23.17/arch/i386/kernel/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/kernel/Makefile
++++ linux-2.6.23.17/arch/i386/kernel/Makefile
@@ -39,13 +39,17 @@ obj-$(CONFIG_VM86) += vm86.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
# vsyscall.o contains the vsyscall DSO images as __initdata.
# We must build both images before we can assemble it.
-diff --git a/arch/i386/kernel/geode.c b/arch/i386/kernel/geode.c
-index 41e8aec..637e301 100644
---- a/arch/i386/kernel/geode.c
-+++ b/arch/i386/kernel/geode.c
-@@ -145,10 +145,14 @@ EXPORT_SYMBOL_GPL(geode_gpio_setup_event);
+Index: linux-2.6.23.17/arch/i386/kernel/geode.c
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/kernel/geode.c
++++ linux-2.6.23.17/arch/i386/kernel/geode.c
+@@ -145,10 +145,14 @@ EXPORT_SYMBOL_GPL(geode_gpio_setup_event
static int __init geode_southbridge_init(void)
{
return 0;
}
-diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
-index 8f03821..3176280 100644
---- a/arch/i386/kernel/head.S
-+++ b/arch/i386/kernel/head.S
+Index: linux-2.6.23.17/arch/i386/kernel/head.S
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/kernel/head.S
++++ linux-2.6.23.17/arch/i386/kernel/head.S
@@ -117,8 +117,34 @@ ENTRY(startup_32)
movl $(COMMAND_LINE_SIZE/4),%ecx
rep
+
+ mov 0x8(%ebp), %eax /* Save callback address */
+ mov %eax, call_firmware - __PAGE_OFFSET
-
++
+ /* Copy the OFW pdir into swapper_pg_dir */
+ movl %esi, %edx /* save %esi */
+ movl $(swapper_pg_dir - __PAGE_OFFSET), %edi
+ movsl
+ movl %edx, %esi /* restore %esi */
+#endif
-+
+
+1:
/*
* Initialize page tables. This creates a PDE and a set of page
page_pde_offset = (__PAGE_OFFSET >> 20);
movl $(pg0 - __PAGE_OFFSET), %edi
-
-
-diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
-index d474cd6..c4b26ba 100644
---- a/arch/i386/kernel/setup.c
-+++ b/arch/i386/kernel/setup.c
+Index: linux-2.6.23.17/arch/i386/kernel/setup.c
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/kernel/setup.c
++++ linux-2.6.23.17/arch/i386/kernel/setup.c
@@ -362,8 +362,10 @@ void __init zone_sizes_init(void)
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
-@@ -428,6 +430,9 @@ void __init setup_bootmem_allocator(void)
+@@ -428,6 +430,9 @@ void __init setup_bootmem_allocator(void
*/
acpi_reserve_bootmem();
#endif
#ifdef CONFIG_X86_FIND_SMP_CONFIG
/*
* Find and reserve possible boot-time SMP configuration:
-diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile
-index 44650e0..1250a7b 100644
---- a/arch/i386/pci/Makefile
-+++ b/arch/i386/pci/Makefile
+Index: linux-2.6.23.17/arch/i386/pci/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/pci/Makefile
++++ linux-2.6.23.17/arch/i386/pci/Makefile
@@ -3,6 +3,7 @@ obj-y := i386.o init.o
obj-$(CONFIG_PCI_BIOS) += pcbios.o
obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o
pci-y := fixup.o
pci-$(CONFIG_ACPI) += acpi.o
-diff --git a/arch/i386/pci/init.c b/arch/i386/pci/init.c
-index 3de9f9b..0f5f7dd 100644
---- a/arch/i386/pci/init.c
-+++ b/arch/i386/pci/init.c
+Index: linux-2.6.23.17/arch/i386/pci/init.c
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/pci/init.c
++++ linux-2.6.23.17/arch/i386/pci/init.c
@@ -14,6 +14,9 @@ static __init int pci_access_init(void)
#ifdef CONFIG_PCI_MMCONFIG
pci_mmcfg_init(type);
if (raw_pci_ops)
return 0;
#ifdef CONFIG_PCI_BIOS
-diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
-index 8c66f27..a67e617 100644
---- a/arch/i386/pci/pci.h
-+++ b/arch/i386/pci/pci.h
+Index: linux-2.6.23.17/arch/i386/pci/pci.h
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/pci/pci.h
++++ linux-2.6.23.17/arch/i386/pci/pci.h
@@ -93,6 +93,7 @@ extern void pci_direct_init(int type);
extern void pci_pcbios_init(void);
extern void pci_mmcfg_init(int type);
/* pci-mmconfig.c */
-diff --git a/drivers/Makefile b/drivers/Makefile
-index f0878b2..c033d30 100644
---- a/drivers/Makefile
-+++ b/drivers/Makefile
+Index: linux-2.6.23.17/drivers/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/Makefile
++++ linux-2.6.23.17/drivers/Makefile
@@ -23,6 +23,8 @@ obj-y += char/
obj-$(CONFIG_CONNECTOR) += connector/
# i810fb and intelfb depend on char/agp/
obj-$(CONFIG_FB_I810) += video/i810/
obj-$(CONFIG_FB_INTEL) += video/intelfb/
-diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
-index c6f6f42..55ae42c 100644
---- a/drivers/char/vt_ioctl.c
-+++ b/drivers/char/vt_ioctl.c
+Index: linux-2.6.23.17/drivers/char/vt_ioctl.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/char/vt_ioctl.c
++++ linux-2.6.23.17/drivers/char/vt_ioctl.c
@@ -37,6 +37,9 @@
char vt_dont_switch;
extern struct tty_driver *console_driver;
#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
-@@ -491,6 +494,14 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
+@@ -491,6 +494,14 @@ int vt_ioctl(struct tty_struct *tty, str
vc->vc_mode = (unsigned char) arg;
if (console != fg_console)
return 0;
/*
* explicitly blank/unblank the screen if switching modes
*/
-diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
-index e6c4a2b..874d623 100644
---- a/drivers/i2c/busses/scx200_acb.c
-+++ b/drivers/i2c/busses/scx200_acb.c
-@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820, 0x840 };
+Index: linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/i2c/busses/scx200_acb.c
++++ linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c
+@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820,
module_param_array(base, int, NULL, 0);
MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
/************************************************************************/
-@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struct scx200_acb_iface *iface)
+@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struc
{
u8 val;
pr_debug(NAME ": ACBCTL2 readback failed\n");
return -ENXIO;
}
-diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
-index 41fc3d0..a15e7a9 100644
---- a/drivers/input/keyboard/atkbd.c
-+++ b/drivers/input/keyboard/atkbd.c
+Index: linux-2.6.23.17/drivers/input/keyboard/atkbd.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/keyboard/atkbd.c
++++ linux-2.6.23.17/drivers/input/keyboard/atkbd.c
@@ -63,12 +63,25 @@ static int atkbd_extra;
module_param_named(extra, atkbd_extra, bool, 0);
MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
#ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
-@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[512] = {
+@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[
82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112,
110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0,
-@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table[128] = {
+@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table
#define ATKBD_RET_HANGEUL 0xf2
#define ATKBD_RET_ERR 0xff
#define ATKBD_LED_EVENT_BIT 0
#define ATKBD_REP_EVENT_BIT 1
-@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table[128] = {
+@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table
#define ATKBD_XL_HANJA 0x20
static struct {
unsigned char set;
unsigned char translated;
unsigned char extra;
-@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
+@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struc
unsigned int code = data;
int scroll = 0, hscroll = 0, click = -1, add_release_event = 0;
int value;
#ifdef ATKBD_DEBUG
printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
-@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd)
+@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(stru
atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
}
} else if (atkbd->set == 3) {
if (atkbd->scroll)
for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++)
-@@ -925,8 +933,8 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd)
+@@ -925,8 +933,8 @@ static void atkbd_set_device_attrs(struc
}
input_dev->keycode = atkbd->keycode;
for (i = 0; i < 512; i++)
if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
-@@ -1017,6 +1025,10 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
+@@ -1017,6 +1025,10 @@ static int atkbd_connect(struct serio *s
return err;
}
/*
* atkbd_reconnect() tries to restore keyboard into a sane state and is
* most likely called on resume.
-@@ -1027,6 +1039,12 @@ static int atkbd_reconnect(struct serio *serio)
+@@ -1027,6 +1039,12 @@ static int atkbd_reconnect(struct serio
struct atkbd *atkbd = serio_get_drvdata(serio);
struct serio_driver *drv = serio->drv;
if (!atkbd || !drv) {
printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
return -1;
-diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
-index 7bbea09..6febbc5 100644
---- a/drivers/input/mouse/Kconfig
-+++ b/drivers/input/mouse/Kconfig
+Index: linux-2.6.23.17/drivers/input/mouse/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/mouse/Kconfig
++++ linux-2.6.23.17/drivers/input/mouse/Kconfig
@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT
If unsure, say N.
config MOUSE_SERIAL
tristate "Serial mouse"
select SERIO
-diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
-index 9e6e363..f4654ce 100644
---- a/drivers/input/mouse/Makefile
-+++ b/drivers/input/mouse/Makefile
-@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += logips2pp.o
+Index: linux-2.6.23.17/drivers/input/mouse/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/mouse/Makefile
++++ linux-2.6.23.17/drivers/input/mouse/Makefile
+@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) +=
psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o
psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o
psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
+psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o
-diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
-index b9f0fb2..edcdb68 100644
---- a/drivers/input/mouse/psmouse-base.c
-+++ b/drivers/input/mouse/psmouse-base.c
+Index: linux-2.6.23.17/drivers/input/mouse/psmouse-base.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/mouse/psmouse-base.c
++++ linux-2.6.23.17/drivers/input/mouse/psmouse-base.c
@@ -26,6 +26,7 @@
#include "synaptics.h"
#include "logips2pp.h"
#include "lifebook.h"
#include "trackpoint.h"
#include "touchkit_ps2.h"
-@@ -103,7 +104,7 @@ static struct attribute_group psmouse_attribute_group = {
+@@ -103,7 +104,7 @@ static struct attribute_group psmouse_at
*/
static DEFINE_MUTEX(psmouse_mutex);
struct psmouse_protocol {
enum psmouse_type type;
-@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
+@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(str
goto out;
}
__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
serio_reconnect(serio);
goto out;
-@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psmouse *psmouse,
+@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psm
}
}
if (genius_detect(psmouse, set_properties) == 0)
return PSMOUSE_GENPS;
-@@ -762,6 +776,14 @@ static const struct psmouse_protocol psmouse_protocols[] = {
+@@ -762,6 +776,14 @@ static const struct psmouse_protocol psm
.detect = touchkit_ps2_detect,
},
#endif
{
.type = PSMOUSE_CORTRON,
.name = "CortronPS/2",
-diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
-index 1317bdd..c4857df 100644
---- a/drivers/input/mouse/psmouse.h
-+++ b/drivers/input/mouse/psmouse.h
+Index: linux-2.6.23.17/drivers/input/mouse/psmouse.h
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/mouse/psmouse.h
++++ linux-2.6.23.17/drivers/input/mouse/psmouse.h
@@ -89,6 +89,7 @@ enum psmouse_type {
PSMOUSE_TRACKPOINT,
PSMOUSE_TOUCHKIT_PS2,
PSMOUSE_AUTO /* This one should always be last */
};
-@@ -96,6 +97,7 @@ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command);
+@@ -96,6 +97,7 @@ int psmouse_sliced_command(struct psmous
int psmouse_reset(struct psmouse *psmouse);
void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
struct psmouse_attribute {
struct device_attribute dattr;
-diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
-index c2eea27..3510726 100644
---- a/drivers/input/serio/i8042.c
-+++ b/drivers/input/serio/i8042.c
-@@ -868,6 +868,11 @@ static long i8042_panic_blink(long count)
+Index: linux-2.6.23.17/drivers/input/serio/i8042.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/serio/i8042.c
++++ linux-2.6.23.17/drivers/input/serio/i8042.c
+@@ -868,6 +868,11 @@ static long i8042_panic_blink(long count
#undef DELAY
#ifdef CONFIG_PM
/*
* Here we try to restore the original BIOS settings. We only want to
* do that once, when we really suspend, not when we taking memory
-@@ -878,8 +883,15 @@ static long i8042_panic_blink(long count)
+@@ -878,8 +883,15 @@ static long i8042_panic_blink(long count
static int i8042_suspend(struct platform_device *dev, pm_message_t state)
{
if (dev->dev.power.power_state.event != state.event) {
dev->dev.power.power_state = state;
}
-@@ -902,9 +914,15 @@ static int i8042_resume(struct platform_device *dev)
+@@ -902,9 +914,15 @@ static int i8042_resume(struct platform_
if (dev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
error = i8042_controller_selftest();
if (error)
-diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
-index 372ca49..c9e5308 100644
---- a/drivers/input/serio/serio.c
-+++ b/drivers/input/serio/serio.c
-@@ -916,11 +916,22 @@ static int serio_uevent(struct device *dev, char **envp, int num_envp, char *buf
+Index: linux-2.6.23.17/drivers/input/serio/serio.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/serio/serio.c
++++ linux-2.6.23.17/drivers/input/serio/serio.c
+@@ -916,11 +916,22 @@ static int serio_uevent(struct device *d
#endif /* CONFIG_HOTPLUG */
#ifdef CONFIG_PM
dev->power.power_state = state;
}
-diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
-index ef53618..47881d2 100644
---- a/drivers/media/video/cafe_ccic.c
-+++ b/drivers/media/video/cafe_ccic.c
+Index: linux-2.6.23.17/drivers/media/video/cafe_ccic.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/media/video/cafe_ccic.c
++++ linux-2.6.23.17/drivers/media/video/cafe_ccic.c
@@ -63,13 +63,13 @@ MODULE_SUPPORTED_DEVICE("Video");
*/
static int n_dma_bufs = 3;
module_param(n_dma_bufs, uint, 0644);
-@@ -370,6 +370,10 @@ static int cafe_smbus_write_data(struct cafe_camera *cam,
+@@ -370,6 +370,10 @@ static int cafe_smbus_write_data(struct
rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
cafe_reg_write(cam, REG_TWSIC1, rval);
spin_unlock_irqrestore(&cam->dev_lock, flags);
/*
* Time to wait for the write to complete. THIS IS A RACY
-@@ -1503,7 +1507,7 @@ static int cafe_v4l_release(struct inode *inode, struct file *filp)
+@@ -1503,7 +1507,7 @@ static int cafe_v4l_release(struct inode
}
if (cam->users == 0) {
cafe_ctlr_power_down(cam);
cafe_free_dma_bufs(cam);
}
mutex_unlock(&cam->s_mutex);
-@@ -2162,7 +2166,7 @@ static int cafe_pci_probe(struct pci_dev *pdev,
+@@ -2162,7 +2166,7 @@ static int cafe_pci_probe(struct pci_dev
/*
* If so requested, try to get our DMA buffers now.
*/
if (cafe_alloc_dma_bufs(cam, 1))
cam_warn(cam, "Unable to alloc DMA buffers at load"
" will try again later.");
-diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index 73e248f..f7afde3 100644
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
+Index: linux-2.6.23.17/drivers/misc/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/misc/Kconfig
++++ linux-2.6.23.17/drivers/misc/Kconfig
@@ -202,5 +202,10 @@ config THINKPAD_ACPI_BAY
If you are not sure, say Y here.
+ The driver supports both read as well as write commands.
endif # MISC_DEVICES
-diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
-index 20a7d89..9abbb58 100644
---- a/drivers/mmc/host/sdhci.c
-+++ b/drivers/mmc/host/sdhci.c
-@@ -411,6 +411,12 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
+Index: linux-2.6.23.17/drivers/mmc/host/sdhci.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mmc/host/sdhci.c
++++ linux-2.6.23.17/drivers/mmc/host/sdhci.c
+@@ -411,6 +411,12 @@ static void sdhci_prepare_data(struct sd
break;
}
if (count >= 0xF) {
printk(KERN_WARNING "%s: Too large timeout requested!\n",
mmc_hostname(host->mmc));
-@@ -676,19 +682,17 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
+@@ -676,19 +682,17 @@ static void sdhci_set_power(struct sdhci
if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
break;
default:
BUG();
-@@ -696,6 +700,10 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
+@@ -696,6 +700,10 @@ static void sdhci_set_power(struct sdhci
writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
out:
host->power = power;
}
-diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
-index fbec8cd..8848e8a 100644
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -278,6 +278,14 @@ config SSFDC
+Index: linux-2.6.23.17/drivers/mtd/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/Kconfig
++++ linux-2.6.23.17/drivers/mtd/Kconfig
+@@ -288,6 +288,14 @@ config SSFDC
This enables read only access to SmartMedia formatted NAND
flash. You can mount it with FAT file system.
source "drivers/mtd/chips/Kconfig"
source "drivers/mtd/maps/Kconfig"
-diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
-index 6d958a4..7f0b04b 100644
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
+Index: linux-2.6.23.17/drivers/mtd/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/Makefile
++++ linux-2.6.23.17/drivers/mtd/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_NFTL) += nftl.o
obj-$(CONFIG_INFTL) += inftl.o
obj-$(CONFIG_RFD_FTL) += rfd_ftl.o
nftl-objs := nftlcore.o nftlmount.o
inftl-objs := inftlcore.o inftlmount.o
-diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
-index 2f19fa7..39eff9f 100644
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
+Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0001.c
++++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c
+@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup(
struct cfi_pri_intelext *extp = cfi->cmdset_priv;
/*
*
* To support multiple partitions when available, we simply arrange
* for each of them to have their own flchip structure even if they
-@@ -1780,7 +1780,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
+@@ -1781,7 +1781,7 @@ static int __xipram do_erase_oneblock(st
return ret;
}
{
unsigned long ofs, len;
int ret;
-@@ -1930,7 +1930,7 @@ static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+@@ -1931,7 +1931,7 @@ static int cfi_intelext_lock(struct mtd_
printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
__FUNCTION__, ofs, len);
cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
#endif
ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
-@@ -1940,7 +1940,7 @@ static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+@@ -1941,7 +1941,7 @@ static int cfi_intelext_lock(struct mtd_
printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
__FUNCTION__, ret);
cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
#endif
return ret;
-@@ -1954,7 +1954,7 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+@@ -1955,7 +1955,7 @@ static int cfi_intelext_unlock(struct mt
printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
__FUNCTION__, ofs, len);
cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
#endif
ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
-@@ -1964,7 +1964,7 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+@@ -1965,7 +1965,7 @@ static int cfi_intelext_unlock(struct mt
printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
__FUNCTION__, ret);
cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
#endif
return ret;
-@@ -2255,7 +2255,7 @@ static void cfi_intelext_save_locks(struct mtd_info *mtd)
+@@ -2256,7 +2256,7 @@ static void cfi_intelext_save_locks(stru
adr = region->offset + block * len;
status = cfi_varsize_frob(mtd,
if (status)
set_bit(block, region->lockmap);
else
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 1f64458..389acc6 100644
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1609,7 +1609,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
+Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0002.c
++++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1617,7 +1617,7 @@ static int __xipram do_erase_oneblock(st
}
{
unsigned long ofs, len;
int ret;
-diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
-index 58e561e..593e9d6 100644
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
+Index: linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/chips/jedec_probe.c
++++ linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c
@@ -70,6 +70,7 @@
/* Fujitsu */
#define M29W800DT 0x00D7
#define M29W800DB 0x005B
#define M29W160DT 0x22C4
-@@ -646,6 +648,23 @@ static const struct amd_flash_info jedec_table[] = {
+@@ -646,6 +648,23 @@ static const struct amd_flash_info jedec
}
}, {
.mfr_id = MANUFACTURER_FUJITSU,
.dev_id = MBM29LV650UE,
.name = "Fujitsu MBM29LV650UE",
.uaddr = {
-@@ -1510,6 +1529,23 @@ static const struct amd_flash_info jedec_table[] = {
+@@ -1510,6 +1529,23 @@ static const struct amd_flash_info jedec
ERASEINFO(0x1000,256)
}
}, {
.mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */
.dev_id = M29W800DT,
-diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
-index ff642f8..b4ea64d 100644
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
+Index: linux-2.6.23.17/drivers/mtd/devices/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/devices/Kconfig
++++ linux-2.6.23.17/drivers/mtd/devices/Kconfig
@@ -69,12 +69,21 @@ config MTD_DATAFLASH26
If you have such a board and such a DataFlash, say 'Y'.
config MTD_SLRAM
tristate "Uncached system RAM"
-diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
-index 78c2511..98df5bc 100644
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
+Index: linux-2.6.23.17/drivers/mtd/devices/m25p80.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/devices/m25p80.c
++++ linux-2.6.23.17/drivers/mtd/devices/m25p80.c
@@ -1,5 +1,5 @@
/*
- * MTD SPI driver for ST M25Pxx flash chips
u8 command[4];
};
-@@ -150,8 +150,9 @@ static int wait_till_ready(struct m25p *flash)
+@@ -150,8 +150,9 @@ static int wait_till_ready(struct m25p *
*/
static int erase_sector(struct m25p *flash, u32 offset)
{
/* Wait until finished previous write command. */
if (wait_till_ready(flash))
-@@ -161,7 +162,7 @@ static int erase_sector(struct m25p *flash, u32 offset)
+@@ -161,7 +162,7 @@ static int erase_sector(struct m25p *fla
write_enable(flash);
/* Set up command buffer. */
flash->command[1] = offset >> 16;
flash->command[2] = offset >> 8;
flash->command[3] = offset;
-@@ -201,13 +202,17 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
+@@ -201,13 +202,17 @@ static int m25p80_erase(struct mtd_info
addr = instr->addr;
len = instr->len;
return -EIO;
}
-@@ -215,7 +220,7 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
+@@ -215,7 +220,7 @@ static int m25p80_erase(struct mtd_info
len -= mtd->erasesize;
}
instr->state = MTD_ERASE_DONE;
mtd_erase_callback(instr);
-@@ -260,16 +265,19 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
+@@ -260,16 +265,19 @@ static int m25p80_read(struct mtd_info *
if (retlen)
*retlen = 0;
/* Set up the write data buffer. */
flash->command[0] = OPCODE_READ;
-@@ -281,7 +289,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
+@@ -281,7 +289,7 @@ static int m25p80_read(struct mtd_info *
*retlen = m.actual_length - sizeof(flash->command);
return 0;
}
-@@ -323,7 +331,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -323,7 +331,7 @@ static int m25p80_write(struct mtd_info
t[1].tx_buf = buf;
spi_message_add_tail(&t[1], &m);
/* Wait until finished previous write command. */
if (wait_till_ready(flash))
-@@ -381,10 +389,10 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -381,10 +389,10 @@ static int m25p80_write(struct mtd_info
if (retlen)
*retlen += m.actual_length
- sizeof(flash->command);
return 0;
}
-@@ -398,24 +406,118 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -398,24 +406,118 @@ static int m25p80_write(struct mtd_info
struct flash_info {
char *name;
/*
* board specific setup should have ensured the SPI clock used here
* matches what the READ command supports, at least until this driver
-@@ -429,37 +531,51 @@ static int __devinit m25p_probe(struct spi_device *spi)
+@@ -429,37 +531,51 @@ static int __devinit m25p_probe(struct s
unsigned i;
/* Platform data helps sort out which chip type we have, as
flash->mtd.name = data->name;
else
flash->mtd.name = spi->dev.bus_id;
-@@ -468,17 +584,25 @@ static int __devinit m25p_probe(struct spi_device *spi)
+@@ -468,17 +584,25 @@ static int __devinit m25p_probe(struct s
flash->mtd.writesize = 1;
flash->mtd.flags = MTD_CAP_NORFLASH;
flash->mtd.size = info->sector_size * info->n_sectors;
flash->mtd.name,
flash->mtd.size, flash->mtd.size / (1024*1024),
flash->mtd.erasesize, flash->mtd.erasesize / 1024,
-@@ -488,7 +612,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
+@@ -488,7 +612,7 @@ static int __devinit m25p_probe(struct s
for (i = 0; i < flash->mtd.numeraseregions; i++)
DEBUG(MTD_DEBUG_LEVEL2,
"mtd.eraseregions[%d] = { .offset = 0x%.8x, "
".numblocks = %d }\n",
i, flash->mtd.eraseregions[i].offset,
flash->mtd.eraseregions[i].erasesize,
-@@ -516,14 +640,14 @@ static int __devinit m25p_probe(struct spi_device *spi)
+@@ -516,14 +640,14 @@ static int __devinit m25p_probe(struct s
}
if (nr_parts > 0) {
}
flash->partitioned = 1;
return add_mtd_partitions(&flash->mtd, parts, nr_parts);
-@@ -560,6 +684,11 @@ static struct spi_driver m25p80_driver = {
+@@ -560,6 +684,11 @@ static struct spi_driver m25p80_driver =
},
.probe = m25p_probe,
.remove = __devexit_p(m25p_remove),
};
-diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
-index a987e91..a5ed6d2 100644
---- a/drivers/mtd/devices/mtd_dataflash.c
-+++ b/drivers/mtd/devices/mtd_dataflash.c
+Index: linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/devices/mtd_dataflash.c
++++ linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
struct spi_device *spi;
struct mtd_info mtd;
-@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
+@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_in
x.len = 4;
spi_message_add_tail(&x, &msg);
while (instr->len > 0) {
unsigned int pageaddr;
int status;
-@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
+@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_in
instr->len -= priv->page_size;
}
}
/* Inform MTD subsystem that erase is complete */
instr->state = MTD_ERASE_DONE;
-@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
+@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_inf
x[1].len = len;
spi_message_add_tail(&x[1], &msg);
/* Continuous read, max clock = f(car) which may be less than
* the peak rate available. Some chips support commands with
-@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
+@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_inf
/* plus 4 "don't care" bytes */
status = spi_sync(priv->spi, &msg);
if (status >= 0) {
*retlen = msg.actual_length - 8;
-@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_in
else
writelen = len;
while (remaining > 0) {
DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
pageaddr, offset, writelen);
-@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_in
else
writelen = remaining;
}
return status;
}
-@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, char *name,
+@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, ch
if (!priv)
return -ENOMEM;
priv->spi = spi;
priv->page_size = pagesize;
priv->page_offset = pageoffset;
-diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
-index e8f686f..7060a08 100644
---- a/drivers/mtd/devices/pmc551.c
-+++ b/drivers/mtd/devices/pmc551.c
+Index: linux-2.6.23.17/drivers/mtd/devices/pmc551.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/devices/pmc551.c
++++ linux-2.6.23.17/drivers/mtd/devices/pmc551.c
@@ -30,8 +30,8 @@
*
* Notes:
* * MUST fix the init function to not spin on a register
* waiting for it to set .. this does not safely handle busted
* devices that never reset the register correctly which will
-@@ -562,10 +562,10 @@ static u32 fixup_pmc551(struct pci_dev *dev)
+@@ -562,10 +562,10 @@ static u32 fixup_pmc551(struct pci_dev *
/*
* Some screen fun
*/
"0x%p\n", priv->asize >> 20, priv->start);
pci_iounmap(priv->dev, priv->start);
}
-diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
-index 7b96cd0..0c9b305 100644
---- a/drivers/mtd/maps/nettel.c
-+++ b/drivers/mtd/maps/nettel.c
-@@ -158,68 +158,11 @@ static struct notifier_block nettel_notifier_block = {
+Index: linux-2.6.23.17/drivers/mtd/maps/nettel.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/maps/nettel.c
++++ linux-2.6.23.17/drivers/mtd/maps/nettel.c
+@@ -158,68 +158,11 @@ static struct notifier_block nettel_noti
nettel_reboot_notifier, NULL, 0
};
{
#ifdef CONFIG_MTD_CFI_INTELEXT
unregister_reboot_notifier(&nettel_notifier_block);
-diff --git a/drivers/mtd/maps/pmcmsp-ramroot.c b/drivers/mtd/maps/pmcmsp-ramroot.c
-index 18049bc..30de5c0 100644
---- a/drivers/mtd/maps/pmcmsp-ramroot.c
-+++ b/drivers/mtd/maps/pmcmsp-ramroot.c
+Index: linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/maps/pmcmsp-ramroot.c
++++ linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c
@@ -79,7 +79,6 @@ static int __init init_rrmap(void)
rr_mtd->owner = THIS_MODULE;
return 0;
}
-diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
-index ef89780..74d9d30 100644
---- a/drivers/mtd/mtd_blkdevs.c
-+++ b/drivers/mtd/mtd_blkdevs.c
+Index: linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/mtd_blkdevs.c
++++ linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c
@@ -24,10 +24,9 @@
#include <linux/kthread.h>
#include <asm/uaccess.h>
struct mtd_blkcore_priv {
struct task_struct *thread;
-@@ -202,7 +201,7 @@ static int blktrans_ioctl(struct inode *inode, struct file *file,
+@@ -202,7 +201,7 @@ static int blktrans_ioctl(struct inode *
}
}
.owner = THIS_MODULE,
.open = blktrans_open,
.release = blktrans_release,
-diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
-index d091b24..22ed96c 100644
---- a/drivers/mtd/mtdchar.c
-+++ b/drivers/mtd/mtdchar.c
-@@ -136,7 +136,8 @@ static int mtd_close(struct inode *inode, struct file *file)
+Index: linux-2.6.23.17/drivers/mtd/mtdchar.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/mtdchar.c
++++ linux-2.6.23.17/drivers/mtd/mtdchar.c
+@@ -137,7 +137,8 @@ static int mtd_close(struct inode *inode
DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
mtd->sync(mtd);
put_mtd_device(mtd);
-diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
-index c153b64..6c2645e 100644
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
+Index: linux-2.6.23.17/drivers/mtd/mtdcore.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/mtdcore.c
++++ linux-2.6.23.17/drivers/mtd/mtdcore.c
@@ -22,6 +22,8 @@
#include <linux/mtd/mtd.h>
/* These are exported solely for the purpose of mtd_blkdevs.c. You
should not use them for _anything_ else */
DEFINE_MUTEX(mtd_table_mutex);
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index f1d60b6..df25cab 100644
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
+Index: linux-2.6.23.17/drivers/mtd/nand/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/nand/Kconfig
++++ linux-2.6.23.17/drivers/mtd/nand/Kconfig
@@ -134,10 +134,10 @@ config MTD_NAND_S3C2410_HWECC
config MTD_NAND_NDFC
laptop.
config MTD_NAND_CS553X
-diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
-index cff969d..cca69b3 100644
---- a/drivers/mtd/nand/cafe_nand.c
-+++ b/drivers/mtd/nand/cafe_nand.c
-@@ -821,14 +821,53 @@ static struct pci_device_id cafe_nand_tbl[] = {
+Index: linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/nand/cafe_nand.c
++++ linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c
+@@ -822,14 +822,53 @@ static struct pci_device_id cafe_nand_tb
MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
#endif
};
-diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
-index fd7a8d5..1c0e89f 100644
---- a/drivers/mtd/nand/ndfc.c
-+++ b/drivers/mtd/nand/ndfc.c
+Index: linux-2.6.23.17/drivers/mtd/nand/ndfc.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/nand/ndfc.c
++++ linux-2.6.23.17/drivers/mtd/nand/ndfc.c
@@ -24,7 +24,11 @@
#include <linux/platform_device.h>
struct ndfc_nand_mtd {
struct mtd_info mtd;
-@@ -230,7 +234,11 @@ static int ndfc_nand_probe(struct platform_device *pdev)
+@@ -230,7 +234,11 @@ static int ndfc_nand_probe(struct platfo
struct ndfc_controller *ndfc = &ndfc_ctrl;
unsigned long long phys = settings->ndfc_erpn | res->start;
if (!ndfc->ndfcbase) {
printk(KERN_ERR "NDFC: ioremap failed\n");
return -EIO;
-diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
-index c257d39..cb41cbc 100644
---- a/drivers/mtd/onenand/Kconfig
-+++ b/drivers/mtd/onenand/Kconfig
+Index: linux-2.6.23.17/drivers/mtd/onenand/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/onenand/Kconfig
++++ linux-2.6.23.17/drivers/mtd/onenand/Kconfig
@@ -40,4 +40,27 @@ config MTD_ONENAND_OTP
OTP block is fully-guaranteed to be a valid block.
+ OneNAND MTD layer.
+
endif # MTD_ONENAND
-diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
-index 269cfe4..4d2eacf 100644
---- a/drivers/mtd/onenand/Makefile
-+++ b/drivers/mtd/onenand/Makefile
+Index: linux-2.6.23.17/drivers/mtd/onenand/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/onenand/Makefile
++++ linux-2.6.23.17/drivers/mtd/onenand/Makefile
@@ -8,4 +8,7 @@ obj-$(CONFIG_MTD_ONENAND) += onenand.o
# Board specific.
obj-$(CONFIG_MTD_ONENAND_GENERIC) += generic.o
+obj-$(CONFIG_MTD_ONENAND_SIM) += onenand_sim.o
+
onenand-objs = onenand_base.o onenand_bbt.o
-diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
-index 0537fac..7d194cf 100644
---- a/drivers/mtd/onenand/onenand_base.c
-+++ b/drivers/mtd/onenand/onenand_base.c
-@@ -206,6 +206,15 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
+Index: linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/onenand/onenand_base.c
++++ linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c
+@@ -206,6 +206,15 @@ static int onenand_command(struct mtd_in
default:
block = (int) (addr >> this->erase_shift);
page = (int) (addr >> this->page_shift);
page &= this->page_mask;
break;
}
-@@ -216,8 +225,12 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
+@@ -216,8 +225,12 @@ static int onenand_command(struct mtd_in
value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
return 0;
}
-@@ -247,6 +260,8 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
+@@ -247,6 +260,8 @@ static int onenand_command(struct mtd_in
break;
default:
dataram = ONENAND_CURRENT_BUFFERRAM(this);
break;
}
-@@ -445,8 +460,9 @@ static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
+@@ -445,8 +460,9 @@ static inline int onenand_bufferram_offs
struct onenand_chip *this = mtd->priv;
if (ONENAND_CURRENT_BUFFERRAM(this)) {
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
-@@ -572,6 +588,30 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
+@@ -572,6 +588,30 @@ static int onenand_write_bufferram(struc
}
/**
* onenand_check_bufferram - [GENERIC] Check BufferRAM information
* @param mtd MTD data structure
* @param addr address to check
-@@ -585,7 +625,10 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
+@@ -585,7 +625,10 @@ static int onenand_check_bufferram(struc
int blockpage, found = 0;
unsigned int i;
/* Is there valid data? */
i = ONENAND_CURRENT_BUFFERRAM(this);
-@@ -625,7 +668,10 @@ static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
+@@ -625,7 +668,10 @@ static void onenand_update_bufferram(str
int blockpage;
unsigned int i;
/* Invalidate another BufferRAM */
i = ONENAND_NEXT_BUFFERRAM(this);
-@@ -734,6 +780,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
+@@ -734,6 +780,7 @@ static int onenand_read(struct mtd_info
int read = 0, column;
int thislen;
int ret = 0, boundary = 0;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-@@ -754,22 +801,22 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
+@@ -754,22 +801,22 @@ static int onenand_read(struct mtd_info
/* Do first load to bufferRAM */
if (read < len) {
if (!onenand_check_bufferram(mtd, from)) {
/*
* Chip boundary handling in DDP
* Now we issued chip 1 read and pointed chip 1
-@@ -794,7 +841,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
+@@ -794,7 +841,7 @@ static int onenand_read(struct mtd_info
this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
ONENAND_SET_NEXT_BUFFERRAM(this);
buf += thislen;
column = 0;
cond_resched();
/* Now wait for load */
-@@ -1079,7 +1126,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+@@ -1079,7 +1126,7 @@ int onenand_bbt_read_oob(struct mtd_info
/* Read more? */
if (read < len) {
/* Update Page size */
column = 0;
}
}
-@@ -1135,12 +1182,12 @@ static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr,
+@@ -1135,12 +1182,12 @@ static int onenand_verify(struct mtd_inf
int thislen, column;
while (len != 0) {
onenand_update_bufferram(mtd, addr, 0);
-@@ -1236,6 +1283,10 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -1236,6 +1283,10 @@ static int onenand_write(struct mtd_info
/* In partial page write we don't update bufferram */
onenand_update_bufferram(mtd, to, !ret && !subpage);
if (ret) {
printk(KERN_ERR "onenand_write: write filaed %d\n", ret);
-@@ -1384,6 +1435,10 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -1384,6 +1435,10 @@ static int onenand_do_write_oob(struct m
this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
ret = this->wait(mtd, FL_WRITING);
if (ret) {
-@@ -2107,6 +2162,7 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
+@@ -2107,6 +2162,7 @@ static int onenand_lock_user_prot_reg(st
*
* Check and set OneNAND features
* - lock scheme
*/
static void onenand_check_features(struct mtd_info *mtd)
{
-@@ -2118,19 +2174,35 @@ static void onenand_check_features(struct mtd_info *mtd)
+@@ -2118,19 +2174,35 @@ static void onenand_check_features(struc
process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
/* Lock scheme */
}
/**
-@@ -2257,6 +2329,8 @@ static int onenand_probe(struct mtd_info *mtd)
+@@ -2257,6 +2329,8 @@ static int onenand_probe(struct mtd_info
this->erase_shift = ffs(mtd->erasesize) - 1;
this->page_shift = ffs(mtd->writesize) - 1;
this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
/* REVIST: Multichip handling */
-@@ -2265,6 +2339,17 @@ static int onenand_probe(struct mtd_info *mtd)
+@@ -2265,6 +2339,17 @@ static int onenand_probe(struct mtd_info
/* Check OneNAND features */
onenand_check_features(mtd);
return 0;
}
-diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
-index 7dcaa09..eb69d4d 100644
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -1390,6 +1390,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
+Index: linux-2.6.23.17/drivers/pci/quirks.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/pci/quirks.c
++++ linux-2.6.23.17/drivers/pci/quirks.c
+@@ -1396,6 +1396,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
/*
* Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
* but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
* Re-allocate the region if needed...
-diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
-index 5216c11..3e3df7e 100644
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
+Index: linux-2.6.23.17/drivers/video/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/Kconfig
++++ linux-2.6.23.17/drivers/video/Kconfig
@@ -594,7 +594,7 @@ config FB_TGA
config FB_VESA
config FB_XILINX
tristate "Xilinx frame buffer support"
depends on FB && XILINX_VIRTEX
-diff --git a/drivers/video/Makefile b/drivers/video/Makefile
-index 06eec7b..fc535fb 100644
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/
+Index: linux-2.6.23.17/drivers/video/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/Makefile
++++ linux-2.6.23.17/drivers/video/Makefile
+@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx
obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
obj-$(CONFIG_FB_PS3) += ps3fb.o
obj-$(CONFIG_FB_SM501) += sm501fb.o
obj-$(CONFIG_FB_XILINX) += xilinxfb.o
obj-$(CONFIG_FB_OMAP) += omap/
-diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
-index 0740272..4ac6a95 100644
---- a/drivers/video/fbmem.c
-+++ b/drivers/video/fbmem.c
+Index: linux-2.6.23.17/drivers/video/fbmem.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/fbmem.c
++++ linux-2.6.23.17/drivers/video/fbmem.c
@@ -820,6 +820,53 @@ static void try_to_load(int fb)
#endif /* CONFIG_KMOD */
fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
{
struct fb_fix_screeninfo *fix = &info->fix;
-diff --git a/drivers/video/geode/Makefile b/drivers/video/geode/Makefile
-index 957304b..5c98da1 100644
---- a/drivers/video/geode/Makefile
-+++ b/drivers/video/geode/Makefile
+Index: linux-2.6.23.17/drivers/video/geode/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/Makefile
++++ linux-2.6.23.17/drivers/video/geode/Makefile
@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o
obj-$(CONFIG_FB_GEODE_LX) += lxfb.o
-gxfb-objs := gxfb_core.o display_gx.o video_gx.o
+gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o
lxfb-objs := lxfb_core.o lxfb_ops.o
-diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c
-index 0f16e4b..a432b99 100644
---- a/drivers/video/geode/display_gx.c
-+++ b/drivers/video/geode/display_gx.c
+Index: linux-2.6.23.17/drivers/video/geode/display_gx.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/display_gx.c
++++ linux-2.6.23.17/drivers/video/geode/display_gx.c
@@ -11,26 +11,44 @@
* Free Software Foundation; either version 2 of the License, or * (at your
* option) any later version.
int gx_line_delta(int xres, int bpp)
{
-@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info *info)
+@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info *
gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
- /* Disable the timing generator. */
- dcfg &= ~(DC_DCFG_TGEN);
- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
-+ /* Programming the clock is costly and ugly, so avoid if if we can */
-
+-
- /* Wait for pending memory requests before disabling the FIFO load. */
- udelay(100);
+-
+- /* Disable FIFO load and compression. */
+- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+- writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+-
+- /* Setup DCLK and its divisor. */
+- par->vid_ops->set_dclk(info);
+-
+- /*
+- * Setup new mode.
+- */
++ /* Programming the clock is costly and ugly, so avoid if if we can */
++
+ if (par->curdclk != info->var.pixclock) {
+ /* Disable the timing generator. */
+ dcfg &= ~(DC_DCFG_TGEN);
+ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
-
-- /* Disable FIFO load and compression. */
-- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
-- writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
++
+ /* Wait for pending memory requests before disabling the FIFO load. */
+ udelay(100);
-
-- /* Setup DCLK and its divisor. */
-- par->vid_ops->set_dclk(info);
++
+ /* Disable FIFO load and compression. */
+ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+ writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
-
-- /*
-- * Setup new mode.
-- */
++
+ /* Setup DCLK and its divisor. */
+ par->vid_ops->set_dclk(info);
+ }
/* Clear all unused feature bits. */
gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
-@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info *info)
+@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info *
gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
/* Framebuffer start offset. */
/* Enable graphics and video data and unmask address lines. */
-@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info *info)
+@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info *
vblankend = vsyncend + info->var.upper_margin;
vtotal = vblankend;
par->vid_ops->configure_display(info);
-diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h
-index 0af33f3..d20b877 100644
---- a/drivers/video/geode/display_gx.h
-+++ b/drivers/video/geode/display_gx.h
+Index: linux-2.6.23.17/drivers/video/geode/display_gx.h
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/display_gx.h
++++ linux-2.6.23.17/drivers/video/geode/display_gx.h
@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops;
#define GLD_MSR_CONFIG 0xC0002001
#define GLD_MSR_CONFIG_DM_FP 0x40
/* Display controller registers */
#define DC_UNLOCK 0x00
-diff --git a/drivers/video/geode/geodefb.h b/drivers/video/geode/geodefb.h
-index ae04820..0214d11 100644
---- a/drivers/video/geode/geodefb.h
-+++ b/drivers/video/geode/geodefb.h
+Index: linux-2.6.23.17/drivers/video/geode/geodefb.h
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/geodefb.h
++++ linux-2.6.23.17/drivers/video/geode/geodefb.h
@@ -12,6 +12,10 @@
#ifndef __GEODEFB_H__
#define __GEODEFB_H__
};
#endif /* !__GEODEFB_H__ */
-diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
-index cf841ef..3eabc53 100644
---- a/drivers/video/geode/gxfb_core.c
-+++ b/drivers/video/geode/gxfb_core.c
+Index: linux-2.6.23.17/drivers/video/geode/gxfb_core.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/gxfb_core.c
++++ linux-2.6.23.17/drivers/video/geode/gxfb_core.c
@@ -30,12 +30,31 @@
#include <linux/fb.h>
#include <linux/init.h>
/* Modes relevant to the GX (taken from modedb.c) */
static const struct fb_videomode gx_modedb[] __initdata = {
-@@ -103,8 +122,20 @@ static const struct fb_videomode gx_modedb[] __initdata = {
+@@ -103,8 +122,20 @@ static const struct fb_videomode gx_mode
{ NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
if (var->xres > 1600 || var->yres > 1200)
-@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_
return 0;
}
{
struct geodefb_par *par = info->par;
-@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, struct fb_info *info)
+@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, st
return par->vid_ops->blank_display(info, blank_mode);
}
ret = pci_request_region(dev, 3, "gxfb (video processor)");
if (ret < 0)
return ret;
-@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *de
+@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory(
ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
if (ret < 0)
return ret;
};
static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
-@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
+@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init
return info;
}
dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n");
goto err;
}
-@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
+@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_
else
par->enable_crt = 1;
pci_release_region(pdev, 0);
}
if (par->vid_regs) {
-@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
+@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_
pci_release_region(pdev, 2);
}
return ret;
}
-@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev *pdev)
+@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev *
}
static struct pci_device_id gxfb_id_table[] = {
+
MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
MODULE_LICENSE("GPL");
-diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
-index 6c227f9..5be8a4d 100644
---- a/drivers/video/geode/lxfb.h
-+++ b/drivers/video/geode/lxfb.h
+Index: linux-2.6.23.17/drivers/video/geode/lxfb.h
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/lxfb.h
++++ linux-2.6.23.17/drivers/video/geode/lxfb.h
@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *);
void lx_get_gamma(struct fb_info *, unsigned int *, int);
void lx_set_gamma(struct fb_info *, unsigned int *, int);
/* MSRS */
#define MSR_LX_GLD_CONFIG 0x48002001
-diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c
-index 5e30b40..c9060ed 100644
---- a/drivers/video/geode/lxfb_core.c
-+++ b/drivers/video/geode/lxfb_core.c
+Index: linux-2.6.23.17/drivers/video/geode/lxfb_core.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/lxfb_core.c
++++ linux-2.6.23.17/drivers/video/geode/lxfb_core.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/pci.h>
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 800x600-60 VESA */
+ { NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 800x600-75 VESA */
++ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 800x600-85 VESA */
++ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1024x768-60 VESA */
++ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6,
++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1024x768-75 VESA */
++ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1024x768-85 VESA */
++ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x960-60 VESA */
++ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x960-85 VESA */
++ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x1024-60 VESA */
++ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x1024-75 VESA */
++ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x1024-85 VESA */
++ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0 },
- /* 640x400-70 */
- 0, FB_VMODE_NONINTERLACED, 0 },
- /* 640x480-72 */
- { NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 800x600-75 VESA */
-+ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0 },
- /* 640x480-75 */
- { NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 800x600-85 VESA */
-+ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0 },
- /* 640x480-85 */
- { NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1024x768-60 VESA */
-+ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6,
-+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1024x768-75 VESA */
-+ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0 },
- /* 640x480-90 */
- { NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3,
- 0, FB_VMODE_NONINTERLACED, 0 },
- /* 640x480-60 */
- { NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1024x768-85 VESA */
-+ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0 },
- /* 800x600-56 */
- { NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2,
- 0, FB_VMODE_NONINTERLACED, 0 },
- /* 800x600-60 */
- { NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x960-60 VESA */
-+ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0 },
- /* 1024x768-60 */
- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x960-85 VESA */
-+ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0 },
- /* 1024x768-70 */
- { NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x1024-60 VESA */
-+ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0 },
- /* 1024x768-72 */
- { NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3,
- 0, FB_VMODE_NONINTERLACED, 0 },
- /* 1024x768-60 */
- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x1024-75 VESA */
-+ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0 },
- /* 1152x864-60 */
- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
- 0, FB_VMODE_NONINTERLACED, 0 },
- /* 1152x864-60 */
- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x1024-85 VESA */
-+ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0 },
- /* 1280x1024-60 */
- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
if (var->xres > 1920 || var->yres > 1440)
-@@ -379,16 +278,55 @@ static int __init lxfb_map_video_memory(struct fb_info *info,
+@@ -379,16 +278,55 @@ static int __init lxfb_map_video_memory(
return 0;
}
};
static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
-@@ -431,6 +369,45 @@ static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
+@@ -431,6 +369,45 @@ static struct fb_info * __init lxfb_init
return info;
}
static int __init lxfb_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
-@@ -467,6 +444,13 @@ static int __init lxfb_probe(struct pci_dev *pdev,
+@@ -467,6 +444,13 @@ static int __init lxfb_probe(struct pci_
modedb_ptr = (struct fb_videomode *) geode_modedb;
modedb_size = ARRAY_SIZE(geode_modedb);
};
#ifndef MODULE
-diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
-index 4fbc99b..47ed9de 100644
---- a/drivers/video/geode/lxfb_ops.c
-+++ b/drivers/video/geode/lxfb_ops.c
+Index: linux-2.6.23.17/drivers/video/geode/lxfb_ops.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/lxfb_ops.c
++++ linux-2.6.23.17/drivers/video/geode/lxfb_ops.c
@@ -13,9 +13,13 @@
#include <linux/fb.h>
#include <linux/uaccess.h>
writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
lx_graphics_disable(info);
-@@ -534,3 +580,285 @@ int lx_blank_display(struct fb_info *info, int blank_mode)
+@@ -534,3 +580,285 @@ int lx_blank_display(struct fb_info *inf
return 0;
}
+ lx_power_on = 1;
+ return 0;
+}
-diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
-index 7f3f18d..e282e74 100644
---- a/drivers/video/geode/video_gx.c
-+++ b/drivers/video/geode/video_gx.c
+Index: linux-2.6.23.17/drivers/video/geode/video_gx.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/video_gx.c
++++ linux-2.6.23.17/drivers/video/geode/video_gx.c
@@ -16,10 +16,14 @@
#include <asm/io.h>
#include <asm/delay.h>
/*
* Tables of register settings for various DOTCLKs.
-@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_table_48MHz[] = {
+@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_
{ 13888, POSTDIV3, 0x000007E1 }, /* 72.0000 */
{ 13426, PREMULT2, 0x00000F4A }, /* 74.4810 */
{ 13333, 0, 0x00000052 }, /* 75.0000 */
{ 12500, POSTDIV3|PREMULT2, 0x00000709 }, /* 80.0000 */
{ 11135, PREMULT2, 0x00000262 }, /* 89.8000 */
{ 10582, 0, 0x000002D2 }, /* 94.5000 */
-@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_table_14MHz[] = {
+@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_
{ 4357, 0, 0x0000057D }, /* 229.5000 */
};
const struct gx_pll_entry *pll_table;
int pll_table_len;
int i, best_i;
-@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct fb_info *info)
+@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct
do {
rdmsrl(MSR_GLCP_DOTPLL, dotpll);
} while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
+ if (pll_table[i].dotpll_value == (u32) (dotpll >> 32))
+ break;
+ }
++
++ return (i == pll_table_len) ? 0 : pll_table[i].pixclock;
++}
- fp = readl(par->vid_regs + GX_FP_PM);
- fp &= ~GX_FP_PM_P;
- writel(fp, par->vid_regs + GX_FP_PM);
-+ return (i == pll_table_len) ? 0 : pll_table[i].pixclock;
-+}
-+
-+
-+#define CMP(val, mask, res) (((val) & (mask)) == (res))
- /* Set timing 1 */
-+static void
-+gx_configure_tft(struct fb_info *info) {
++#define CMP(val, mask, res) (((val) & (mask)) == (res))
- fp = readl(par->vid_regs + GX_FP_PT1);
- fp &= GX_FP_PT1_VSIZE_MASK;
- fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
- writel(fp, par->vid_regs + GX_FP_PT1);
-+ struct geodefb_par *par = info->par;
-+ u32 val, fp = 0, fp1, fp2, sync = 0;
++static void
++gx_configure_tft(struct fb_info *info) {
- /* Timing 2 */
- /* Set bits that are always on for TFT */
-+ /* Set up the DF pad select MSR */
++ struct geodefb_par *par = info->par;
++ u32 val, fp = 0, fp1, fp2, sync = 0;
- fp = 0x0F100000;
-+ rdmsrl(GX_VP_MSR_PAD_SELECT, val);
++ /* Set up the DF pad select MSR */
- /* Add sync polarity */
++ rdmsrl(GX_VP_MSR_PAD_SELECT, val);
++
+ if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) {
+ val &= ~GX_VP_PAD_SELECT_MASK;
+ val |= GX_VP_PAD_SELECT_TFT;
+
+ if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) ||
+ (fp2 != (0x0F100000 | sync))) {
-
-- /* Enable the FP data and power (in case the BIOS didn't) */
++
+ /* Turn off the panel */
-
-- fp = readl(par->vid_regs + GX_DCFG);
-- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
-- writel(fp, par->vid_regs + GX_DCFG);
++
+#ifdef NOTUSED
+ /* Do we really need to turn off the panel? */
+ /* Possibly - we have a glitch somewhere */
-- /* Unblank the panel */
+- /* Enable the FP data and power (in case the BIOS didn't) */
+ fp = readl(par->vid_regs + GX_FP_PM);
+ fp &= ~GX_FP_PM_P;
+ writel(fp, par->vid_regs + GX_FP_PM);
+#endif
-+
+
+- fp = readl(par->vid_regs + GX_DCFG);
+- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
+- writel(fp, par->vid_regs + GX_DCFG);
+ /* Timing 1 */
+ fp1 &= GX_FP_PT1_VSIZE_MASK;
+ fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
+ writel(fp, par->vid_regs + GX_FP_PT1);
-+
+
+- /* Unblank the panel */
+ /* Timing 2 */
+ writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2);
+ }
/* Set up the flat panel (if it is enabled) */
-@@ -289,6 +348,100 @@ static void gx_configure_display(struct fb_info *info)
+@@ -289,6 +348,100 @@ static void gx_configure_display(struct
gx_configure_tft(info);
}
static int gx_blank_display(struct fb_info *info, int blank_mode)
{
struct geodefb_par *par = info->par;
-@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
+@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_in
default:
return -EINVAL;
}
dcfg = readl(par->vid_regs + GX_DCFG);
dcfg &= ~(GX_DCFG_DAC_BL_EN
| GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
-@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
+@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_in
dcfg |= GX_DCFG_VSYNC_EN;
writel(dcfg, par->vid_regs + GX_DCFG);
if (par->enable_crt == 0) {
fp_pm = readl(par->vid_regs + GX_FP_PM);
-@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
+@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_in
return 0;
}
.configure_display = gx_configure_display,
.blank_display = gx_blank_display,
};
-diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h
-index ce28d8f..c57b36b 100644
---- a/drivers/video/geode/video_gx.h
-+++ b/drivers/video/geode/video_gx.h
+Index: linux-2.6.23.17/drivers/video/geode/video_gx.h
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/video_gx.h
++++ linux-2.6.23.17/drivers/video/geode/video_gx.h
@@ -11,6 +11,8 @@
#ifndef __VIDEO_GX_H__
#define __VIDEO_GX_H__
+void gx_restore_regs(struct fb_info *info, struct geoderegs *regs);
+
#endif /* !__VIDEO_GX_H__ */
-diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
-index 3741ad7..49f6db5 100644
---- a/drivers/video/modedb.c
-+++ b/drivers/video/modedb.c
+Index: linux-2.6.23.17/drivers/video/modedb.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/modedb.c
++++ linux-2.6.23.17/drivers/video/modedb.c
@@ -33,6 +33,8 @@ const char *global_mode_option;
* Standard video mode definitions (taken from XFree86)
*/
static const struct fb_videomode modedb[] = {
{
/* 640x400 @ 70 Hz, 31.5 kHz hsync */
-@@ -504,7 +506,8 @@ int fb_find_mode(struct fb_var_screeninfo *var,
+@@ -504,7 +506,8 @@ int fb_find_mode(struct fb_var_screeninf
}
if (!default_mode)
if (!default_bpp)
default_bpp = 8;
-diff --git a/fs/Kconfig b/fs/Kconfig
-index f9eed6d..6fa3ea2 100644
---- a/fs/Kconfig
-+++ b/fs/Kconfig
-@@ -999,6 +999,23 @@ config HUGETLBFS
+Index: linux-2.6.23.17/fs/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/fs/Kconfig
++++ linux-2.6.23.17/fs/Kconfig
+@@ -1003,6 +1003,23 @@ config HUGETLBFS
config HUGETLB_PAGE
def_bool HUGETLBFS
config RAMFS
bool
default y
-@@ -1225,6 +1242,14 @@ config JFFS2_FS_WRITEBUFFER
+@@ -1229,6 +1246,14 @@ config JFFS2_FS_WRITEBUFFER
- NOR flash with transparent ECC
- DataFlash
config JFFS2_SUMMARY
bool "JFFS2 summary support (EXPERIMENTAL)"
depends on JFFS2_FS && EXPERIMENTAL
-@@ -1295,52 +1320,52 @@ config JFFS2_ZLIB
+@@ -1299,52 +1324,52 @@ config JFFS2_ZLIB
select ZLIB_DEFLATE
depends on JFFS2_FS
default y
endchoice
-diff --git a/fs/Makefile b/fs/Makefile
-index 720c29d..61f1a4d 100644
---- a/fs/Makefile
-+++ b/fs/Makefile
-@@ -108,6 +108,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/
+Index: linux-2.6.23.17/fs/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/fs/Makefile
++++ linux-2.6.23.17/fs/Makefile
+@@ -110,6 +110,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/
obj-$(CONFIG_FUSE_FS) += fuse/
obj-$(CONFIG_UDF_FS) += udf/
obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
obj-$(CONFIG_JFS_FS) += jfs/
obj-$(CONFIG_XFS_FS) += xfs/
obj-$(CONFIG_9P_FS) += 9p/
-diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c
-index 504643f..d568ae8 100644
---- a/fs/jffs2/background.c
-+++ b/fs/jffs2/background.c
-@@ -23,8 +23,8 @@ static int jffs2_garbage_collect_thread(void *);
+Index: linux-2.6.23.17/fs/jffs2/background.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/background.c
++++ linux-2.6.23.17/fs/jffs2/background.c
+@@ -23,8 +23,8 @@ static int jffs2_garbage_collect_thread(
void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c)
{
spin_lock(&c->erase_completion_lock);
spin_unlock(&c->erase_completion_lock);
}
-diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
-index 485d065..d90ca05 100644
---- a/fs/jffs2/compr.c
-+++ b/fs/jffs2/compr.c
+Index: linux-2.6.23.17/fs/jffs2/compr.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/compr.c
++++ linux-2.6.23.17/fs/jffs2/compr.c
@@ -5,7 +5,7 @@
* Created by Arjan van de Ven <arjanv@redhat.com>
*
*
* For licensing information, see the file 'LICENCE' in this directory.
*
-@@ -43,121 +43,122 @@ static uint32_t none_stat_compr_blocks=0,none_stat_decompr_blocks=0,none_stat_co
+@@ -43,121 +43,122 @@ static uint32_t none_stat_compr_blocks=0
* *datalen accordingly to show the amount of data which were compressed.
*/
uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
- unsigned char *output_buf = NULL, *tmp_buf;
- uint32_t orig_slen, orig_dlen;
- uint32_t best_slen=0, best_dlen=0;
-+ int compr_ret;
-+ struct jffs2_compressor *this, *best=NULL;
-+ unsigned char *output_buf = NULL, *tmp_buf;
-+ uint32_t orig_slen, orig_dlen;
-+ uint32_t best_slen=0, best_dlen=0;
-
+-
- switch (jffs2_compression_mode) {
- case JFFS2_COMPR_MODE_NONE:
- break;
- /* Skip decompress-only backwards-compatibility and disabled modules */
- if ((!this->compress)||(this->disabled))
- continue;
-+ switch (jffs2_compression_mode) {
-+ case JFFS2_COMPR_MODE_NONE:
-+ break;
-+ case JFFS2_COMPR_MODE_PRIORITY:
-+ output_buf = kmalloc(*cdatalen,GFP_KERNEL);
-+ if (!output_buf) {
-+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
-+ goto out;
-+ }
-+ orig_slen = *datalen;
-+ orig_dlen = *cdatalen;
-+ spin_lock(&jffs2_compressor_list_lock);
-+ list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ /* Skip decompress-only backwards-compatibility and disabled modules */
-+ if ((!this->compress)||(this->disabled))
-+ continue;
-
+-
- this->usecount++;
- spin_unlock(&jffs2_compressor_list_lock);
- *datalen = orig_slen;
- default:
- printk(KERN_ERR "JFFS2: unknow compression mode.\n");
- }
++ int compr_ret;
++ struct jffs2_compressor *this, *best=NULL;
++ unsigned char *output_buf = NULL, *tmp_buf;
++ uint32_t orig_slen, orig_dlen;
++ uint32_t best_slen=0, best_dlen=0;
++
++ switch (jffs2_compression_mode) {
++ case JFFS2_COMPR_MODE_NONE:
++ break;
++ case JFFS2_COMPR_MODE_PRIORITY:
++ output_buf = kmalloc(*cdatalen,GFP_KERNEL);
++ if (!output_buf) {
++ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
++ goto out;
++ }
++ orig_slen = *datalen;
++ orig_dlen = *cdatalen;
++ spin_lock(&jffs2_compressor_list_lock);
++ list_for_each_entry(this, &jffs2_compressor_list, list) {
++ /* Skip decompress-only backwards-compatibility and disabled modules */
++ if ((!this->compress)||(this->disabled))
++ continue;
++
+ this->usecount++;
+ spin_unlock(&jffs2_compressor_list_lock);
+ *datalen = orig_slen;
return ret;
}
-@@ -165,8 +166,8 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+@@ -165,8 +166,8 @@ int jffs2_decompress(struct jffs2_sb_inf
uint16_t comprtype, unsigned char *cdata_in,
unsigned char *data_out, uint32_t cdatalen, uint32_t datalen)
{
/* Older code had a bug where it would write non-zero 'usercompr'
fields. Deal with it. */
-@@ -177,32 +178,32 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+@@ -177,32 +178,32 @@ int jffs2_decompress(struct jffs2_sb_inf
case JFFS2_COMPR_NONE:
/* This should be special-cased elsewhere, but we might as well deal with it */
memcpy(data_out, cdata_in, datalen);
return -EIO;
}
return 0;
-@@ -210,108 +211,108 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+@@ -210,108 +211,108 @@ int jffs2_decompress(struct jffs2_sb_inf
int jffs2_register_compressor(struct jffs2_compressor *comp)
{
- comp->stat_compr_blocks=0;
- comp->stat_decompr_blocks=0;
- D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
+-
+- spin_lock(&jffs2_compressor_list_lock);
+-
+- list_for_each_entry(this, &jffs2_compressor_list, list) {
+- if (this->priority < comp->priority) {
+- list_add(&comp->list, this->list.prev);
+- goto out;
+- }
+- }
+- list_add_tail(&comp->list, &jffs2_compressor_list);
+ if (!comp->name) {
+ printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
+ return -1;
+ comp->stat_compr_blocks=0;
+ comp->stat_decompr_blocks=0;
+ D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
-
-- spin_lock(&jffs2_compressor_list_lock);
++
+ spin_lock(&jffs2_compressor_list_lock);
-
-- list_for_each_entry(this, &jffs2_compressor_list, list) {
-- if (this->priority < comp->priority) {
-- list_add(&comp->list, this->list.prev);
-- goto out;
-- }
-- }
-- list_add_tail(&comp->list, &jffs2_compressor_list);
++
+ list_for_each_entry(this, &jffs2_compressor_list, list) {
+ if (this->priority < comp->priority) {
+ list_add(&comp->list, this->list.prev);
{
- D2(struct jffs2_compressor *this;)
+ D2(struct jffs2_compressor *this;)
-
-- D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
++
+ D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
-- spin_lock(&jffs2_compressor_list_lock);
+- D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
+ spin_lock(&jffs2_compressor_list_lock);
-- if (comp->usecount) {
-- spin_unlock(&jffs2_compressor_list_lock);
-- printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
-- return -1;
-- }
-- list_del(&comp->list);
+- spin_lock(&jffs2_compressor_list_lock);
+ if (comp->usecount) {
+ spin_unlock(&jffs2_compressor_list_lock);
+ printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
+ }
+ list_del(&comp->list);
+- if (comp->usecount) {
+- spin_unlock(&jffs2_compressor_list_lock);
+- printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
+- return -1;
+- }
+- list_del(&comp->list);
+-
- D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
- })
- return 0;
+ return 0;
}
-diff --git a/fs/jffs2/compr.h b/fs/jffs2/compr.h
-index 68cc701..1070275 100644
---- a/fs/jffs2/compr.h
-+++ b/fs/jffs2/compr.h
+Index: linux-2.6.23.17/fs/jffs2/compr.h
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/compr.h
++++ linux-2.6.23.17/fs/jffs2/compr.h
@@ -2,7 +2,7 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig);
-diff --git a/fs/jffs2/compr_rtime.c b/fs/jffs2/compr_rtime.c
-index 0d0bfd2..546d153 100644
---- a/fs/jffs2/compr_rtime.c
-+++ b/fs/jffs2/compr_rtime.c
-@@ -104,7 +104,7 @@ static int jffs2_rtime_decompress(unsigned char *data_in,
+Index: linux-2.6.23.17/fs/jffs2/compr_rtime.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/compr_rtime.c
++++ linux-2.6.23.17/fs/jffs2/compr_rtime.c
+@@ -104,7 +104,7 @@ static int jffs2_rtime_decompress(unsign
}
}
}
}
static struct jffs2_compressor jffs2_rtime_comp = {
-diff --git a/fs/jffs2/compr_rubin.c b/fs/jffs2/compr_rubin.c
-index ea0431e..c73fa89 100644
---- a/fs/jffs2/compr_rubin.c
-+++ b/fs/jffs2/compr_rubin.c
-@@ -384,7 +384,7 @@ static int jffs2_rubinmips_decompress(unsigned char *data_in,
+Index: linux-2.6.23.17/fs/jffs2/compr_rubin.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/compr_rubin.c
++++ linux-2.6.23.17/fs/jffs2/compr_rubin.c
+@@ -384,7 +384,7 @@ static int jffs2_rubinmips_decompress(un
void *model)
{
rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in, cpage_out, sourcelen, dstlen);
}
static int jffs2_dynrubin_decompress(unsigned char *data_in,
-@@ -399,7 +399,7 @@ static int jffs2_dynrubin_decompress(unsigned char *data_in,
+@@ -399,7 +399,7 @@ static int jffs2_dynrubin_decompress(uns
bits[c] = data_in[c];
rubin_do_decompress(256, bits, data_in+8, cpage_out, sourcelen-8, dstlen);
}
static struct jffs2_compressor jffs2_rubinmips_comp = {
-diff --git a/fs/jffs2/compr_zlib.c b/fs/jffs2/compr_zlib.c
-index 2b87fcc..cfd301a 100644
---- a/fs/jffs2/compr_zlib.c
-+++ b/fs/jffs2/compr_zlib.c
-@@ -181,7 +181,7 @@ static int jffs2_zlib_decompress(unsigned char *data_in,
+Index: linux-2.6.23.17/fs/jffs2/compr_zlib.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/compr_zlib.c
++++ linux-2.6.23.17/fs/jffs2/compr_zlib.c
+@@ -181,7 +181,7 @@ static int jffs2_zlib_decompress(unsigne
}
zlib_inflateEnd(&inf_strm);
mutex_unlock(&inflate_mutex);
return ret;
}
-diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
-index c1dfca3..d293a1f 100644
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -32,7 +32,7 @@ static int jffs2_mkdir (struct inode *,struct dentry *,int);
+Index: linux-2.6.23.17/fs/jffs2/dir.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/dir.c
++++ linux-2.6.23.17/fs/jffs2/dir.c
+@@ -32,7 +32,7 @@ static int jffs2_mkdir (struct inode *,s
static int jffs2_rmdir (struct inode *,struct dentry *);
static int jffs2_mknod (struct inode *,struct dentry *,int,dev_t);
static int jffs2_rename (struct inode *, struct dentry *,
const struct file_operations jffs2_dir_operations =
{
-@@ -770,7 +770,7 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de
+@@ -770,7 +770,7 @@ static int jffs2_mknod (struct inode *di
}
static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
{
int ret;
struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
-diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
-index 66e7c2f..efd83f3 100644
---- a/fs/jffs2/erase.c
-+++ b/fs/jffs2/erase.c
-@@ -38,8 +38,8 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
+Index: linux-2.6.23.17/fs/jffs2/erase.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/erase.c
++++ linux-2.6.23.17/fs/jffs2/erase.c
+@@ -38,8 +38,8 @@ static void jffs2_erase_block(struct jff
#ifdef __ECOS
ret = jffs2_flash_erase(c, jeb);
if (!ret) {
}
bad_offset = jeb->offset;
#else /* Linux */
-@@ -50,12 +50,14 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
+@@ -50,12 +50,14 @@ static void jffs2_erase_block(struct jff
instr = kmalloc(sizeof(struct erase_info) + sizeof(struct erase_priv_struct), GFP_KERNEL);
if (!instr) {
printk(KERN_WARNING "kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n");
return;
}
-@@ -82,12 +84,14 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
+@@ -82,12 +84,14 @@ static void jffs2_erase_block(struct jff
if (ret == -ENOMEM || ret == -EAGAIN) {
/* Erase failed immediately. Refile it on the list */
D1(printk(KERN_DEBUG "Erase at 0x%08x failed: %d. Refiling on erase_pending_list\n", jeb->offset, ret));
return;
}
-@@ -114,6 +118,7 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count)
+@@ -114,6 +118,7 @@ void jffs2_erase_pending_blocks(struct j
jeb = list_entry(c->erase_complete_list.next, struct jffs2_eraseblock, list);
list_del(&jeb->list);
spin_unlock(&c->erase_completion_lock);
jffs2_mark_erased_block(c, jeb);
if (!--count) {
-@@ -134,6 +139,7 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count)
+@@ -134,6 +139,7 @@ void jffs2_erase_pending_blocks(struct j
jffs2_free_jeb_node_refs(c, jeb);
list_add(&jeb->list, &c->erasing_list);
spin_unlock(&c->erase_completion_lock);
jffs2_erase_block(c, jeb);
-@@ -142,23 +148,25 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count)
+@@ -142,23 +148,25 @@ void jffs2_erase_pending_blocks(struct j
}
/* Be nice */
/* Ensure that kupdated calls us again to mark them clean */
jffs2_erase_pending_trigger(c);
}
-@@ -172,22 +180,26 @@ static void jffs2_erase_failed(struct jffs2_sb_info *c, struct jffs2_eraseblock
+@@ -172,22 +180,26 @@ static void jffs2_erase_failed(struct jf
failed too many times. */
if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) {
/* We'd like to give this block another try. */
wake_up(&c->erase_wait);
}
-@@ -317,6 +329,33 @@ static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_erasebl
+@@ -317,6 +329,33 @@ static int jffs2_block_check_erase(struc
size_t retlen;
int ret = -EIO;
ebuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!ebuf) {
printk(KERN_WARNING "Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n", jeb->offset);
-@@ -417,6 +456,7 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb
+@@ -417,6 +456,7 @@ static void jffs2_mark_erased_block(stru
jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, c->cleanmarker_size, NULL);
}
spin_lock(&c->erase_completion_lock);
c->erasing_size -= c->sector_size;
c->free_size += jeb->free_size;
-@@ -429,23 +469,28 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb
+@@ -429,23 +469,28 @@ static void jffs2_mark_erased_block(stru
c->nr_erasing_blocks--;
c->nr_free_blocks++;
spin_unlock(&c->erase_completion_lock);
+ up(&c->erase_free_sem);
return;
}
-diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
-index 2d99e06..eded819 100644
---- a/fs/jffs2/gc.c
-+++ b/fs/jffs2/gc.c
-@@ -556,7 +556,7 @@ static int jffs2_garbage_collect_pristine(struct jffs2_sb_info *c,
+Index: linux-2.6.23.17/fs/jffs2/gc.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/gc.c
++++ linux-2.6.23.17/fs/jffs2/gc.c
+@@ -556,7 +556,7 @@ static int jffs2_garbage_collect_pristin
node = kmalloc(rawlen, GFP_KERNEL);
if (!node)
ret = jffs2_flash_read(c, ref_offset(raw), rawlen, &retlen, (char *)node);
if (!ret && retlen != rawlen)
-@@ -624,7 +624,7 @@ static int jffs2_garbage_collect_pristine(struct jffs2_sb_info *c,
+@@ -624,7 +624,7 @@ static int jffs2_garbage_collect_pristin
if (ret || (retlen != rawlen)) {
printk(KERN_NOTICE "Write of %d bytes at 0x%08x failed. returned %d, retlen %zd\n",
if (retlen) {
jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, rawlen, NULL);
} else {
-diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
-index b13298a..ae99cd7 100644
---- a/fs/jffs2/jffs2_fs_sb.h
-+++ b/fs/jffs2/jffs2_fs_sb.h
+Index: linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/jffs2_fs_sb.h
++++ linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h
@@ -106,6 +106,9 @@ struct jffs2_sb_info {
uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */
#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
unsigned char *wbuf; /* Write-behind buffer for NAND flash */
uint32_t wbuf_ofs;
-diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h
-index bc5509f..8b4955a 100644
---- a/fs/jffs2/nodelist.h
-+++ b/fs/jffs2/nodelist.h
-@@ -127,7 +127,7 @@ static inline struct jffs2_inode_cache *jffs2_raw_ref_to_ic(struct jffs2_raw_nod
+Index: linux-2.6.23.17/fs/jffs2/nodelist.h
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/nodelist.h
++++ linux-2.6.23.17/fs/jffs2/nodelist.h
+@@ -127,7 +127,7 @@ static inline struct jffs2_inode_cache *
return ((struct jffs2_inode_cache *)raw);
}
#define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size)
-diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
-index dbc908a..5b49bff 100644
---- a/fs/jffs2/nodemgmt.c
-+++ b/fs/jffs2/nodemgmt.c
-@@ -154,7 +154,7 @@ int jffs2_reserve_space_gc(struct jffs2_sb_info *c, uint32_t minsize,
+Index: linux-2.6.23.17/fs/jffs2/nodemgmt.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/nodemgmt.c
++++ linux-2.6.23.17/fs/jffs2/nodemgmt.c
+@@ -154,7 +154,7 @@ int jffs2_reserve_space_gc(struct jffs2_
while(ret == -EAGAIN) {
ret = jffs2_do_reserve_space(c, minsize, len, sumsize);
if (ret) {
}
}
spin_unlock(&c->erase_completion_lock);
-@@ -423,7 +423,12 @@ struct jffs2_raw_node_ref *jffs2_add_physical_node_ref(struct jffs2_sb_info *c,
+@@ -423,7 +423,12 @@ struct jffs2_raw_node_ref *jffs2_add_phy
even after refiling c->nextblock */
if ((c->nextblock || ((ofs & 3) != REF_OBSOLETE))
&& (jeb != c->nextblock || (ofs & ~3) != jeb->offset + (c->sector_size - jeb->free_size))) {
return ERR_PTR(-EINVAL);
}
#endif
-diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
-index b5baa35..8d4319c 100644
---- a/fs/jffs2/readinode.c
-+++ b/fs/jffs2/readinode.c
-@@ -211,7 +211,7 @@ static void jffs2_kill_tn(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info *
+Index: linux-2.6.23.17/fs/jffs2/readinode.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/readinode.c
++++ linux-2.6.23.17/fs/jffs2/readinode.c
+@@ -211,7 +211,7 @@ static void jffs2_kill_tn(struct jffs2_s
* ordering.
*
* Returns 0 if the node was handled (including marking it obsolete)
*/
static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c,
struct jffs2_readinode_info *rii,
-@@ -862,8 +862,8 @@ static inline int read_unknown(struct jffs2_sb_info *c, struct jffs2_raw_node_re
+@@ -862,8 +862,8 @@ static inline int read_unknown(struct jf
JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n",
ref_offset(ref));
JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n",
jffs2_mark_node_obsolete(c, ref);
return 0;
}
-diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
-index 6c75cd4..59dd408 100644
---- a/fs/jffs2/scan.c
-+++ b/fs/jffs2/scan.c
-@@ -863,7 +863,7 @@ scan_more:
+Index: linux-2.6.23.17/fs/jffs2/scan.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/scan.c
++++ linux-2.6.23.17/fs/jffs2/scan.c
+@@ -877,7 +877,7 @@ scan_more:
switch (je16_to_cpu(node->nodetype) & JFFS2_COMPAT_MASK) {
case JFFS2_FEATURE_ROCOMPAT:
printk(KERN_NOTICE "Read-only compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs);
if (!(jffs2_is_readonly(c)))
return -EROFS;
if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen)))))
-diff --git a/fs/jffs2/security.c b/fs/jffs2/security.c
-index bc9f6ba..02c39c6 100644
---- a/fs/jffs2/security.c
-+++ b/fs/jffs2/security.c
-@@ -38,9 +38,9 @@ int jffs2_init_security(struct inode *inode, struct inode *dir)
+Index: linux-2.6.23.17/fs/jffs2/security.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/security.c
++++ linux-2.6.23.17/fs/jffs2/security.c
+@@ -38,9 +38,9 @@ int jffs2_init_security(struct inode *in
}
rc = do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, value, len, 0);
}
/* ---- XATTR Handler for "security.*" ----------------- */
-diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c
-index d828b29..2a77d3f 100644
---- a/fs/jffs2/summary.c
-+++ b/fs/jffs2/summary.c
+Index: linux-2.6.23.17/fs/jffs2/summary.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/summary.c
++++ linux-2.6.23.17/fs/jffs2/summary.c
@@ -2,10 +2,10 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
*
* For licensing information, see the file 'LICENCE' in this directory.
*
-diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h
-index 0c6669e..8bf34f2 100644
---- a/fs/jffs2/summary.h
-+++ b/fs/jffs2/summary.h
+Index: linux-2.6.23.17/fs/jffs2/summary.h
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/summary.h
++++ linux-2.6.23.17/fs/jffs2/summary.h
@@ -2,9 +2,9 @@
* JFFS2 -- Journalling Flash File System, Version 2.
*
*
* For licensing information, see the file 'LICENCE' in this directory.
*
-diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
-index 91d1d0f..d1d4f27 100644
---- a/fs/jffs2/wbuf.c
-+++ b/fs/jffs2/wbuf.c
-@@ -220,6 +220,47 @@ static struct jffs2_raw_node_ref **jffs2_incore_replace_raw(struct jffs2_sb_info
+Index: linux-2.6.23.17/fs/jffs2/wbuf.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/wbuf.c
++++ linux-2.6.23.17/fs/jffs2/wbuf.c
+@@ -220,6 +220,47 @@ static struct jffs2_raw_node_ref **jffs2
return NULL;
}
/* Recover from failure to write wbuf. Recover the nodes up to the
* wbuf, not the one which we were starting to try to write. */
-@@ -380,7 +421,7 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
+@@ -380,7 +421,7 @@ static void jffs2_wbuf_recover(struct jf
ret = c->mtd->write(c->mtd, ofs, towrite, &retlen,
rewrite_buf);
/* Argh. We tried. Really we did. */
printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n");
kfree(buf);
-@@ -587,15 +628,16 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
+@@ -587,15 +628,16 @@ static int __jffs2_flush_wbuf(struct jff
ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf);
static const struct jffs2_unknown_node oob_cleanmarker =
{
-@@ -1021,8 +1063,8 @@ int jffs2_check_oob_empty(struct jffs2_sb_info *c,
+@@ -1021,8 +1063,8 @@ int jffs2_check_oob_empty(struct jffs2_s
/*
* Check for a valid cleanmarker.
* Returns: 0 if a valid cleanmarker was found
*/
int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c,
struct jffs2_eraseblock *jeb)
-@@ -1138,11 +1180,22 @@ int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
+@@ -1138,11 +1180,22 @@ int jffs2_nand_flash_setup(struct jffs2_
return -ENOMEM;
}
kfree(c->wbuf);
kfree(c->oobbuf);
}
-diff --git a/fs/jffs2/xattr.h b/fs/jffs2/xattr.h
-index 3b0ff29..6e3b5dd 100644
---- a/fs/jffs2/xattr.h
-+++ b/fs/jffs2/xattr.h
-@@ -75,7 +75,7 @@ extern void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c);
+Index: linux-2.6.23.17/fs/jffs2/xattr.h
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/xattr.h
++++ linux-2.6.23.17/fs/jffs2/xattr.h
+@@ -75,7 +75,7 @@ extern void jffs2_build_xattr_subsystem(
extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
-diff --git a/fs/jffs2/xattr_user.c b/fs/jffs2/xattr_user.c
-index 40942bc..8bbeab9 100644
---- a/fs/jffs2/xattr_user.c
-+++ b/fs/jffs2/xattr_user.c
+Index: linux-2.6.23.17/fs/jffs2/xattr_user.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/xattr_user.c
++++ linux-2.6.23.17/fs/jffs2/xattr_user.c
@@ -17,7 +17,7 @@
#include "nodelist.h"
{
if (!strcmp(name, ""))
return -EINVAL;
-@@ -25,7 +25,7 @@ static int jffs2_user_getxattr(struct inode *inode, const char *name,
+@@ -25,7 +25,7 @@ static int jffs2_user_getxattr(struct in
}
static int jffs2_user_setxattr(struct inode *inode, const char *name, const void *buffer,
{
if (!strcmp(name, ""))
return -EINVAL;
-diff --git a/include/asm-i386/geode.h b/include/asm-i386/geode.h
-index 6da4bbb..f18ebe2 100644
---- a/include/asm-i386/geode.h
-+++ b/include/asm-i386/geode.h
-@@ -135,6 +135,55 @@ static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
+Index: linux-2.6.23.17/include/asm-i386/geode.h
+===================================================================
+--- linux-2.6.23.17.orig/include/asm-i386/geode.h
++++ linux-2.6.23.17/include/asm-i386/geode.h
+@@ -135,6 +135,55 @@ static inline void geode_gpio_event_pme(
geode_gpio_setup_event(gpio, pair, 1);
}
/* Specific geode tests */
static inline int is_geode_gx(void)
-
-diff --git a/include/asm-i386/setup.h b/include/asm-i386/setup.h
-index 7862fe8..d7146c0 100644
---- a/include/asm-i386/setup.h
-+++ b/include/asm-i386/setup.h
+Index: linux-2.6.23.17/include/asm-i386/setup.h
+===================================================================
+--- linux-2.6.23.17.orig/include/asm-i386/setup.h
++++ linux-2.6.23.17/include/asm-i386/setup.h
@@ -24,6 +24,7 @@
#define OLD_CL_BASE_ADDR 0x90000
#define OLD_CL_OFFSET 0x90022
#ifndef __ASSEMBLY__
-diff --git a/include/linux/console.h b/include/linux/console.h
-index 56a7bcd..1a8b034 100644
---- a/include/linux/console.h
-+++ b/include/linux/console.h
-@@ -121,14 +121,11 @@ extern void console_stop(struct console *);
+Index: linux-2.6.23.17/include/linux/console.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/console.h
++++ linux-2.6.23.17/include/linux/console.h
+@@ -121,14 +121,11 @@ extern void console_stop(struct console
extern void console_start(struct console *);
extern int is_console_locked(void);
int mda_console_init(void);
void prom_con_init(void);
-diff --git a/include/linux/fb.h b/include/linux/fb.h
-index cec5410..6b59db5 100644
---- a/include/linux/fb.h
-+++ b/include/linux/fb.h
+Index: linux-2.6.23.17/include/linux/fb.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/fb.h
++++ linux-2.6.23.17/include/linux/fb.h
@@ -664,6 +664,12 @@ struct fb_ops {
/* restore saved state */
void (*fb_restore_state)(struct fb_info *info);
/* get capability given var */
void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
struct fb_var_screeninfo *var);
-@@ -943,6 +949,9 @@ extern int fb_get_color_depth(struct fb_var_screeninfo *var,
+@@ -943,6 +949,9 @@ extern int fb_get_color_depth(struct fb_
extern int fb_get_options(char *name, char **option);
extern int fb_new_modelist(struct fb_info *info);
extern struct fb_info *registered_fb[FB_MAX];
extern int num_registered_fb;
extern struct class *fb_class;
-diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
-index a56d24a..fd0a260 100644
---- a/include/linux/mtd/onenand.h
-+++ b/include/linux/mtd/onenand.h
+Index: linux-2.6.23.17/include/linux/mtd/onenand.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/mtd/onenand.h
++++ linux-2.6.23.17/include/linux/mtd/onenand.h
@@ -60,6 +60,7 @@ struct onenand_bufferram {
* @erase_shift: [INTERN] number of address bits in a block
* @page_shift: [INTERN] number of address bits in a page
#define ONENAND_PAGEBUF_ALLOC (0x1000)
#define ONENAND_OOBBUF_ALLOC (0x2000)
-diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
-index af94719..c46161f 100644
---- a/include/linux/mtd/onenand_regs.h
-+++ b/include/linux/mtd/onenand_regs.h
+Index: linux-2.6.23.17/include/linux/mtd/onenand_regs.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/mtd/onenand_regs.h
++++ linux-2.6.23.17/include/linux/mtd/onenand_regs.h
@@ -74,6 +74,8 @@
#define ONENAND_DEVICE_DENSITY_512Mb (0x002)
#define ONENAND_CMD_UNLOCK (0x23)
#define ONENAND_CMD_LOCK (0x2A)
#define ONENAND_CMD_LOCK_TIGHT (0x2C)
-diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
-index 699b7e9..b44facf 100644
---- a/include/linux/vt_kern.h
-+++ b/include/linux/vt_kern.h
+Index: linux-2.6.23.17/include/linux/vt_kern.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/vt_kern.h
++++ linux-2.6.23.17/include/linux/vt_kern.h
@@ -95,4 +95,23 @@ struct vt_spawn_console {
};
extern struct vt_spawn_console vt_spawn_con;
+}
+
#endif /* _VT_KERN_H */
-diff --git a/kernel/power/console.c b/kernel/power/console.c
-index 89bcf49..dca98f5 100644
---- a/kernel/power/console.c
-+++ b/kernel/power/console.c
+Index: linux-2.6.23.17/kernel/power/console.c
+===================================================================
+--- linux-2.6.23.17.orig/kernel/power/console.c
++++ linux-2.6.23.17/kernel/power/console.c
@@ -9,7 +9,7 @@
#include <linux/console.h>
#include "power.h"
projects / openwrt.git / commitdiff