added dmesg for the WRT54G v2.0

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@463 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..83b6012
--- /dev/null
+++ b/openwrt/docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt
@@ -0,0 +1,97 @@
+PU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005
+Determined physical RAM map:
+ memory: 02000000 @ 00000000 (usable)
+On node 0 totalpages: 8192
+zone(0): 8192 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.47 BogoMIPS
+Memory: 30304k/32768k available (1463k kernel code, 2464k reserved, 104k data, 88k init, 0k highmem)
+Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
+Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
+cfi_cmdset_0001: Erase suspend on write enabled
+0: offset=0x0,size=0x2000,blocks=8
+1: offset=0x10000,size=0x10000,blocks=63
+Using word write method
+Flash device: 0x400000 at 0x1c000000
+Creating 4 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000f0000-0x003f0000 : "rootfs"
+0x003f0000-0x00400000 : "nvram"
+sflash: found no supported devices
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 2048 bind 4096)
+ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000101
+using v2 hardware
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E   phy=FFFFFFFF
+5325E   VLAN programming for BCM5325E-MDIO I/F switch
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: Setting MAC address to  00 0a 48 06 82 50.
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
+device br0 entered promiscuous mode
+device br0 left promiscuous mode
+device br0 entered promiscuous mode
+device br0 left promiscuous mode
+

diff --git a/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt b/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt
index 513692c..8278e09 100644 (file)
--- a/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt
+++ b/openwrt/docs/hardware/linksys/wrt54g_v20/info.txt
@@ -4,7 +4,7 @@ Online Description from Linksys:
 http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601
 
 CPU: BCM4712 at 200 MHz
-RAM: 16 MB
+RAM: 16 MB (32MB on the XH models, please check http://openwrt.org/forum/viewtopic.php?t=731)
 Flash: 4 MB
 1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
 1 Broadcom BCM4320 802.11 Wireless Controller 
@@ -16,3 +16,4 @@ nvram.txt: contents of NVRAM after OpenWRT upgrade
 cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
 ifconfig.txt: output of ifconfig (2.4.29)
 pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg (XH model, 2.4.29)