# Makefile for OpenWRT
#
-# Copyright (C) 2005 by Felix Fietkau <nbd@vd-s.ath.cx>
+# Copyright (C) 2005 by Felix Fietkau <openwrt@nbd.name>
# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
#
# This program is free software; you can redistribute it and/or modify
.NOTPARALLEL:
-##############################################################
-#
-# Build the toolchain
-#
-##############################################################
-toolchain_install:
- $(MAKE) -C toolchain install
-
-##############################################################
-#
-# Make all packages
-#
-##############################################################
-
-package_compile: target_compile
- $(MAKE) -C package compile
-
-package_install: package_compile toolchain
- $(MAKE) -C package install
-
#############################################################
#
# You should probably leave this stuff alone unless you know
# In this section, we need .config
include .config.cmd
-world: $(DL_DIR) $(BUILD_DIR) configtest toolchain_install package_install target_install package_index
+world: $(DL_DIR) $(BUILD_DIR) configtest toolchain/install target/compile package/compile target/install package_index
-.PHONY: all world clean dirclean distclean image_clean target_clean source target_install toolchain_install package_install configtest
+.PHONY: all world clean dirclean distclean image_clean target_clean source configtest
configtest:
-cp .config .config.test
$(STAGING_DIR)/usr/bin/ipkg-make-index . > Packages \
)
-target_compile:
- $(MAKE) -C target compile
-
-target_install:
- $(MAKE) -C target install
-
$(DL_DIR):
@mkdir -p $(DL_DIR)
rm -rf $(BIN_DIR)
target_clean: image_clean
- rm -rf $(TARGET_DIR)
rm -rf $(BUILD_DIR)/linux-*/root
clean: target_clean
-./scripts/configtest.pl
allyesconfig: $(CONFIG)/conf
- #@$(CONFIG)/conf -y $(CONFIG_CONFIG_IN)
- #sed -i -e "s/^CONFIG_DEBUG.*/# CONFIG_DEBUG is not set/" .config
-touch .config
-cp .config .config.test
@$(CONFIG)/conf -o $(CONFIG_CONFIG_IN)
source "package/wpa_supplicant/Config.in"
source "package/wput/Config.in"
source "package/xinetd/Config.in"
-source "target/linux/package/wificonf/Config.in"
+source "package/wificonf/Config.in"
comment "Libraries"
source "package/glib/Config.in"
include $(TOPDIR)/rules.mk
package-:=tcp_wrappers
+package-y:=nvram
package-$(BR2_PACKAGE_AICCU) += aiccu
package-$(BR2_PACKAGE_AMWALL) += amwall
package-$(BR2_PACKAGE_ARPTABLES) += arptables
package-$(BR2_PACKAGE_USBUTILS) += usbutils
package-$(BR2_PACKAGE_VTUN) += vtun
package-$(BR2_PACKAGE_VSFTPD) += vsftpd
+package-$(BR2_PACKAGE_WIFICONF) += wificonf
package-$(BR2_PACKAGE_WIRELESS_TOOLS) += wireless-tools
package-$(BR2_PACKAGE_WOL) += wol
package-$(BR2_PACKAGE_WPA_SUPPLICANT) += wpa_supplicant
package-$(BR2_PACKAGE_XINETD) += xinetd
package-$(BR2_PACKAGE_ZLIB) += zlib
-DEV_LIBS:=tcp_wrappers glib ncurses openssl pcre popt zlib libnet libpcap mysql postgresql iptables matrixssl lzo gmp fuse portmap libelf uclibc++ speex libpng libgd wireless-tools
+DEV_LIBS:=tcp_wrappers glib ncurses openssl pcre popt zlib libnet libpcap mysql postgresql iptables matrixssl lzo gmp fuse portmap libelf uclibc++ speex libpng libgd wireless-tools nvram
DEV_LIBS_COMPILE:=$(patsubst %,%-compile,$(DEV_LIBS))
SDK_DEFAULT_PACKAGES:=busybox dnsmasq iptables wireless-tools dropbear bridge ipkg ppp
SDK_DEFAULT_COMPILE:=$(patsubst %,%-compile,$(SDK_DEFAULT_PACKAGES))
COMPILE_PACKAGES:=$(patsubst %,%-compile,$(package-y) $(package-m))
INSTALL_PACKAGES:=$(patsubst %,%-install,$(package-y))
-all: compile install
+all: compile
clean: $(patsubst %,%-clean,$(package-) $(package-y) $(package-m))
compile: $(COMPILE_PACKAGES)
install: base-files-install $(INSTALL_PACKAGES)
-$(COMPILE_PACKAGES): base-files-install
+$(COMPILE_PACKAGES): base-files-compile
$(INSTALL_PACKAGES): base-files-install
amwall-compile: libamsel-compile
tor-compile: libevent-compile openssl-compile zlib-compile
usbutils-compile: libusb-compile
vtun-compile: zlib-compile openssl-compile lzo-compile
-wificonf-compile: wireless-tools-compile
+wificonf-compile: wireless-tools-compile nvram-compile
wpa_supplicant-compile: openssl-compile
asterisk-compile: ncurses-compile openssl-compile
@touch $(STAMP_DIR)/.$@
%-install: %-compile
- @[ -f $(STAMP_DIR)/.$@ ] || $(MAKE) -C $(patsubst %-install,%,$@) install
- @touch $(STAMP_DIR)/.$@
+ @$(MAKE) -C $(patsubst %-install,%,$@) \
+ TARGET_DIR="$(TARGET_DIR)" \
+ IPKG_CONF="$(IPKG_CONF)" \
+ BOARD="$(BOARD)" \
+ install
%-rebuild:
@rm -f $(STAMP_DIR)/.$(patsubst %-rebuild,%,$@)-*
PKG_NAME:=base-files
PKG_RELEASE:=1
+PKG_BUILD_DIR:=$(BUILD_DIR)/base-files
-IDIR_BASE:=$(BUILD_DIR)/base-files
+include $(TOPDIR)/package/rules.mk
+
+IDIR_BASE:=$(PKG_BUILD_DIR)/base-files
IPKG_BASE:=$(PACKAGE_DIR)/$(PKG_NAME)_$(PKG_RELEASE)_$(ARCH).ipk
LIBC_VERSION:=${shell cat $(STAGING_DIR)/uclibc_version}
-IDIR_LIBC:=$(BUILD_DIR)/uclibc
+IDIR_LIBC:=$(PKG_BUILD_DIR)/uclibc
IPKG_LIBC:=$(PACKAGE_DIR)/uclibc_$(LIBC_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk
GCC_VERSION:=${shell cat $(STAGING_DIR)/gcc_version}
-IDIR_GCC:=$(BUILD_DIR)/libgcc
+IDIR_GCC:=$(PKG_BUILD_DIR)/libgcc
IPKG_GCC:=$(PACKAGE_DIR)/libgcc_$(GCC_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk
PACKAGES:=$(IPKG_BASE) $(IPKG_LIBC) $(IPKG_GCC)
-$(PACKAGES): $(PACKAGE_DIR)
-$(PACKAGE_DIR):
- mkdir -p $@
+$(PKG_BUILD_DIR)/.prepared:
+ mkdir -p $(PKG_BUILD_DIR) $(PACKAGE_DIR)
+ touch $@
+
+$(PKG_BUILD_DIR)/.built:
+ touch $@
$(IPKG_BASE):
$(SCRIPT_DIR)/make-ipkg-dir.sh $(IDIR_BASE) ipkg/$(PKG_NAME).control $(PKG_RELEASE) $(ARCH)
install: compile
mkdir -p $(TARGET_DIR)
$(IPKG) install $(PACKAGES)
-clean:
- rm -rf $(IDIR_BASE) $(IDIR_LIBC) $(IDIR_GCC)
--- /dev/null
+# $Id$
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=nvram
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+
+include $(TOPDIR)/package/rules.mk
+
+# does not depend on menuconfig
+ifneq ($(BOARD),brcm)
+BR2_PACKAGE_NVRAM:=m
+else
+BR2_PACKAGE_NVRAM:=y
+endif
+
+$(eval $(call PKG_template,NVRAM,nvram,$(PKG_RELEASE),$(ARCH)))
+
+$(PKG_BUILD_DIR)/.prepared:
+ mkdir -p $(PKG_BUILD_DIR)
+ cp -a ./src/* $(PKG_BUILD_DIR)
+ touch $@
+
+$(PKG_BUILD_DIR)/.built:
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ $(TARGET_CONFIGURE_OPTS) \
+ CFLAGS="$(TARGET_CFLAGS) -I $(STAGING_DIR)/usr/include"
+ touch $@
+
+$(IPKG_NVRAM):
+ mkdir -p $(IDIR_NVRAM)/usr/lib
+ cp $(PKG_BUILD_DIR)/*.so $(IDIR_NVRAM)/usr/lib
+ mkdir -p $(IDIR_NVRAM)/usr/sbin
+ cp $(PKG_BUILD_DIR)/nvram $(IDIR_NVRAM)/usr/sbin
+ $(RSTRIP) $(IDIR_NVRAM)
+ $(IPKG_BUILD) $(IDIR_NVRAM) $(PACKAGE_DIR)
+
+
+compile: install-dev
+install-dev:
+ mkdir -p $(STAGING_DIR)/usr/lib
+ cp $(PKG_BUILD_DIR)/*.so $(STAGING_DIR)/usr/lib
+
+
--- /dev/null
+Package: nvram
+Priority: optional
+Section: sys
+Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
+Source: buildroot internal
+Description: NVRAM utility and libraries for Broadcom hardware
+
--- /dev/null
+# $Id$
+
+EXTRA_CFLAGS := -c -I. -I../include
+LIBSHARED_OBJS := shutils.o wl.o wl_linux.o defaults.o linux_timer.o
+LIBNVRAM_OBJS := nvram_linux.o nvram_convert.o
+
+all: libshared.so libnvram.so nvram
+
+%.o: %.c
+ $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -o $@ $^
+
+libshared.so: $(LIBSHARED_OBJS)
+ $(CC) -shared -o $@ $^
+
+libnvram.so: $(LIBNVRAM_OBJS)
+ $(CC) -shared -o $@ $^
+
+nvram: main.o
+ $(CC) -o $@ $^ -L. -lnvram
+
+clean:
+ rm -f *.o *.so nvram
--- /dev/null
+/*
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Low resolution timer interface. Timer handlers may be called
+ * in a deferred manner in a different task context after the
+ * timer expires or in the task context from which the timer
+ * was created, depending on the implementation.
+ *
+ * $Id$
+ */
+#ifndef __bcmtimer_h__
+#define __bcmtimer_h__
+
+/* ANSI headers */
+#include <time.h>
+
+/* timer ID */
+typedef unsigned int bcm_timer_module_id;
+typedef unsigned int bcm_timer_id;
+
+/* timer callback */
+typedef void (*bcm_timer_cb)(bcm_timer_id id, int data);
+
+/* OS-independant interfaces, applications should call these functions only */
+int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id);
+int bcm_timer_module_cleanup(bcm_timer_module_id module_id);
+int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable);
+int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id);
+int bcm_timer_delete(bcm_timer_id timer_id);
+int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *value);
+int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *value);
+int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data);
+int bcm_timer_cancel(bcm_timer_id timer_id);
+int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec);
+
+#endif /* #ifndef __bcmtimer_h__ */
--- /dev/null
+/*
+ * Router default NVRAM values
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <epivers.h>
+#include <string.h>
+#include <bcmnvram.h>
+#include <typedefs.h>
+#include <wlioctl.h>
+
+#define XSTR(s) STR(s)
+#define STR(s) #s
+
+struct nvram_tuple router_defaults[] = {
+ /* OS parameters */
+ { "os_name", "", 0 }, /* OS name string */
+ { "os_version", EPI_VERSION_STR, 0 }, /* OS revision */
+ { "os_date", __DATE__, 0 }, /* OS date */
+
+ /* Miscellaneous parameters */
+ { "timer_interval", "3600", 0 }, /* Timer interval in seconds */
+ { "ntp_server", "192.5.41.40 192.5.41.41 133.100.9.2", 0 }, /* NTP server */
+ { "time_zone", "PST8PDT", 0 }, /* Time zone (GNU TZ format) */
+ { "log_level", "0", 0 }, /* Bitmask 0:off 1:denied 2:accepted */
+ { "upnp_enable", "0", 0 }, /* Start UPnP */
+ { "ezc_enable", "1", 0 }, /* Enable EZConfig updates */
+ { "ezc_version", "1", 0 }, /* EZConfig version */
+ { "is_default", "1", 0 }, /* is it default setting: 1:yes 0:no*/
+ { "os_server", "", 0 }, /* URL for getting upgrades */
+ { "stats_server", "", 0 }, /* URL for posting stats */
+ { "console_loglevel", "1", 0 }, /* Kernel panics only */
+
+ /* Big switches */
+ { "router_disable", "0", 0 }, /* lan_proto=static lan_stp=0 wan_proto=disabled */
+ { "fw_disable", "0", 0 }, /* Disable firewall (allow new connections from the WAN) */
+
+ { "log_ipaddr", "", 0 }, /* syslog recipient */
+
+ /* LAN H/W parameters */
+ { "lan_ifname", "", 0 }, /* LAN interface name */
+ { "lan_ifnames", "", 0 }, /* Enslaved LAN interfaces */
+ { "lan_hwnames", "", 0 }, /* LAN driver names (e.g. et0) */
+ { "lan_hwaddr", "", 0 }, /* LAN interface MAC address */
+
+ /* LAN TCP/IP parameters */
+ { "lan_proto", "dhcp", 0 }, /* [static|dhcp] */
+ { "lan_ipaddr", "192.168.1.1", 0 }, /* LAN IP address */
+ { "lan_netmask", "255.255.255.0", 0 }, /* LAN netmask */
+ { "lan_stp", "0", 0 }, /* LAN spanning tree protocol */
+ { "lan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */
+ { "lan_domain", "", 0 }, /* LAN domain name */
+ { "lan_lease", "86400", 0 }, /* LAN lease time in seconds */
+
+ /* WAN H/W parameters */
+ { "wan_ifname", "", 0 }, /* WAN interface name */
+ { "wan_ifnames", "", 0 }, /* WAN interface names */
+ { "wan_hwname", "", 0 }, /* WAN driver name (e.g. et1) */
+ { "wan_hwaddr", "", 0 }, /* WAN interface MAC address */
+
+ /* WAN TCP/IP parameters */
+ { "wan_proto", "dhcp", 0 }, /* [static|dhcp|pppoe|disabled] */
+ { "wan_ipaddr", "0.0.0.0", 0 }, /* WAN IP address */
+ { "wan_netmask", "0.0.0.0", 0 }, /* WAN netmask */
+ { "wan_gateway", "0.0.0.0", 0 }, /* WAN gateway */
+ { "wan_dns", "", 0 }, /* x.x.x.x x.x.x.x ... */
+ { "wan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */
+ { "wan_hostname", "", 0 }, /* WAN hostname */
+ { "wan_domain", "", 0 }, /* WAN domain name */
+ { "wan_lease", "86400", 0 }, /* WAN lease time in seconds */
+
+ /* PPPoE parameters */
+ { "wan_pppoe_ifname", "", 0 }, /* PPPoE enslaved interface */
+ { "wan_pppoe_username", "", 0 }, /* PPP username */
+ { "wan_pppoe_passwd", "", 0 }, /* PPP password */
+ { "wan_pppoe_idletime", "60", 0 }, /* Dial on demand max idle time (seconds) */
+ { "wan_pppoe_keepalive", "0", 0 }, /* Restore link automatically */
+ { "wan_pppoe_demand", "0", 0 }, /* Dial on demand */
+ { "wan_pppoe_mru", "1492", 0 }, /* Negotiate MRU to this value */
+ { "wan_pppoe_mtu", "1492", 0 }, /* Negotiate MTU to the smaller of this value or the peer MRU */
+ { "wan_pppoe_service", "", 0 }, /* PPPoE service name */
+ { "wan_pppoe_ac", "", 0 }, /* PPPoE access concentrator name */
+
+ /* Misc WAN parameters */
+ { "wan_desc", "", 0 }, /* WAN connection description */
+ { "wan_route", "", 0 }, /* Static routes (ipaddr:netmask:gateway:metric:ifname ...) */
+ { "wan_primary", "0", 0 }, /* Primary wan connection */
+
+ { "wan_unit", "0", 0 }, /* Last configured connection */
+
+ /* Filters */
+ { "filter_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */
+ { "filter_macmode", "deny", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */
+ { "filter_client0", "", 0 }, /* [lan_ipaddr0-lan_ipaddr1|*]:lan_port0-lan_port1,proto,enable,day_start-day_end,sec_start-sec_end,desc */
+
+ /* Port forwards */
+ { "dmz_ipaddr", "", 0 }, /* x.x.x.x (equivalent to 0-60999>dmz_ipaddr:0-60999) */
+ { "forward_port0", "", 0 }, /* wan_port0-wan_port1>lan_ipaddr:lan_port0-lan_port1[:,]proto[:,]enable[:,]desc */
+ { "autofw_port0", "", 0 }, /* out_proto:out_port,in_proto:in_port0-in_port1>to_port0-to_port1,enable,desc */
+
+ /* DHCP server parameters */
+ { "dhcp_start", "192.168.1.100", 0 }, /* First assignable DHCP address */
+ { "dhcp_end", "192.168.1.150", 0 }, /* Last assignable DHCP address */
+ { "dhcp_domain", "wan", 0 }, /* Use WAN domain name first if available (wan|lan) */
+ { "dhcp_wins", "wan", 0 }, /* Use WAN WINS first if available (wan|lan) */
+
+ /* Web server parameters */
+ { "http_username", "", 0 }, /* Username */
+ { "http_passwd", "admin", 0 }, /* Password */
+ { "http_wanport", "", 0 }, /* WAN port to listen on */
+ { "http_lanport", "80", 0 }, /* LAN port to listen on */
+
+ /* Wireless parameters */
+ { "wl_ifname", "", 0 }, /* Interface name */
+ { "wl_hwaddr", "", 0 }, /* MAC address */
+ { "wl_phytype", "g", 0 }, /* Current wireless band ("a" (5 GHz), "b" (2.4 GHz), or "g" (2.4 GHz)) */
+ { "wl_corerev", "", 0 }, /* Current core revision */
+ { "wl_phytypes", "", 0 }, /* List of supported wireless bands (e.g. "ga") */
+ { "wl_radioids", "", 0 }, /* List of radio IDs */
+ { "wl_ssid", "OpenWrt", 0 }, /* Service set ID (network name) */
+ { "wl_country", "", 0 }, /* Country (default obtained from driver) */
+ { "wl_radio", "1", 0 }, /* Enable (1) or disable (0) radio */
+ { "wl_closed", "0", 0 }, /* Closed (hidden) network */
+ { "wl_ap_isolate", "0", 0 }, /* AP isolate mode */
+ { "wl_mode", "ap", 0 }, /* AP mode (ap|sta|wds) */
+ { "wl_lazywds", "0", 0 }, /* Enable "lazy" WDS mode (0|1) */
+ { "wl_wds", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */
+ { "wl_wep", "disabled", 0 }, /* WEP data encryption (enabled|disabled) */
+ { "wl_auth", "0", 0 }, /* Shared key authentication optional (0) or required (1) */
+ { "wl_key", "1", 0 }, /* Current WEP key */
+ { "wl_key1", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
+ { "wl_key2", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
+ { "wl_key3", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
+ { "wl_key4", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
+ { "wl_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */
+ { "wl_macmode", "disabled", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */
+ { "wl_channel", "11", 0 }, /* Channel number */
+ { "wl_rate", "0", 0 }, /* Rate (bps, 0 for auto) */
+ { "wl_rateset", "default", 0 }, /* "default" or "all" or "12" */
+ { "wl_frag", "2346", 0 }, /* Fragmentation threshold */
+ { "wl_rts", "2347", 0 }, /* RTS threshold */
+ { "wl_dtim", "1", 0 }, /* DTIM period */
+ { "wl_bcn", "100", 0 }, /* Beacon interval */
+ { "wl_plcphdr", "long", 0 }, /* 802.11b PLCP preamble type */
+ { "wl_net_mode", "mixed", 0 }, /* 54g mode */
+ { "wl_gmode", "6", 0 }, /* 54g mode */
+ { "wl_gmode_protection", "auto", 0 }, /* 802.11g RTS/CTS protection (off|auto) */
+ { "wl_afterburner", "auto", 0 }, /* AfterBurner */
+ { "wl_frameburst", "off", 0 }, /* BRCM Frambursting mode (off|on) */
+ { "wl_antdiv", "-1", 0 }, /* Antenna Diversity (-1|0|1|3) */
+ { "wl_infra", "1", 0 }, /* Network Type (BSS/IBSS) */
+
+ /* WPA parameters */
+ { "security_mode", "open", 0 },
+ { "wl_auth_mode", "open", 0 }, /* Network authentication mode (open|shared|radius|wpa|psk) */
+ { "wl_wpa_psk", "", 0 }, /* WPA pre-shared key */
+ { "wl_wpa_gtk_rekey", "3600", 0 }, /* GTK rotation interval */
+ { "wl_radius_ipaddr", "", 0 }, /* RADIUS server IP address */
+ { "wl_radius_key", "", 0 }, /* RADIUS shared secret */
+ { "wl_radius_port", "1812", 0 }, /* RADIUS server UDP port */
+ { "wl_crypto", "tkip", 0 }, /* WPA data encryption */
+
+
+ { "wl_unit", "0", 0 }, /* Last configured interface */
+
+ /* Restore defaults */
+ { "restore_defaults", "0", 0 }, /* Set to 0 to not restore defaults on boot */
+
+ { 0, 0, 0 }
+};
--- /dev/null
+/*
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Low resolution timer interface linux specific implementation.
+ *
+ * $Id$
+ */
+
+/*
+* debug facilities
+*/
+#define TIMER_DEBUG 0
+#if TIMER_DEBUG
+#define TIMERDBG(fmt, args...) printf("%s: " fmt "\n" , __FUNCTION__ , ## args)
+#else
+#define TIMERDBG(fmt, args...)
+#endif
+
+
+/*
+ * POSIX timer support for Linux. Taken from linux_timer.c in upnp
+ */
+
+#define __USE_GNU
+
+
+#include <stdlib.h> // for malloc, free, etc.
+#include <string.h> // for memset, strncasecmp, etc.
+#include <assert.h> // for assert, of course.
+#include <signal.h> // for sigemptyset, etc.
+#include <stdio.h> // for printf, etc.
+#include <sys/time.h>
+#include <time.h>
+
+/* define TIMER_PROFILE to enable code which guages how accurate the timer functions are.
+ For each expiring timer the code will print the expected time interval and the actual time interval.
+#define TIMER_PROFILE
+*/
+#undef TIMER_PROFILE
+
+/*
+timer_cancel( ) - cancel a timer
+timer_connect( ) - connect a user routine to the timer signal
+timer_create( ) - allocate a timer using the specified clock for a timing base (POSIX)
+timer_delete( ) - remove a previously created timer (POSIX)
+timer_gettime( ) - get the remaining time before expiration and the reload value (POSIX)
+timer_getoverrun( ) - return the timer expiration overrun (POSIX)
+timer_settime( ) - set the time until the next expiration and arm timer (POSIX)
+nanosleep( ) - suspend the current task until the time interval elapses (POSIX)
+*/
+
+#define MS_PER_SEC 1000
+#define US_PER_SEC 1000000
+#define US_PER_MS 1000
+#define UCLOCKS_PER_SEC 1000000
+
+typedef void (*event_callback_t)(timer_t, int);
+
+#ifndef TIMESPEC_TO_TIMEVAL
+# define TIMESPEC_TO_TIMEVAL(tv, ts) { \
+ (tv)->tv_sec = (ts)->tv_sec; \
+ (tv)->tv_usec = (ts)->tv_nsec / 1000; \
+}
+#endif
+
+#ifndef TIMEVAL_TO_TIMESPEC
+# define TIMEVAL_TO_TIMESPEC(tv, ts) { \
+ (ts)->tv_sec = (tv)->tv_sec; \
+ (ts)->tv_nsec = (tv)->tv_usec * 1000; \
+}
+#endif
+
+#define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y))
+
+#define timerroundup(t,g) \
+ do { \
+ if (!timerisset(t)) (t)->tv_usec=1; \
+ if ((t)->tv_sec == 0) (t)->tv_usec=ROUNDUP((t)->tv_usec, g); \
+ } while (0)
+
+typedef long uclock_t;
+
+#define TFLAG_NONE 0
+#define TFLAG_CANCELLED (1<<0)
+#define TFLAG_DELETED (1<<1)
+
+struct event {
+ struct timeval it_interval;
+ struct timeval it_value;
+ event_callback_t func;
+ int arg;
+ unsigned short flags;
+ struct event *next;
+#ifdef TIMER_PROFILE
+ uint expected_ms;
+ uclock_t start;
+#endif
+};
+
+void timer_cancel(timer_t timerid);
+
+static void alarm_handler(int i);
+static void check_event_queue();
+static void print_event_queue();
+static void check_timer();
+#if THIS_FINDS_USE
+static int count_queue(struct event *);
+#endif
+static int timer_change_settime(timer_t timer_id, const struct itimerspec *timer_spec);
+void block_timer();
+void unblock_timer();
+
+static struct event *event_queue = NULL;
+static struct event *event_freelist;
+static uint g_granularity;
+static int g_maxevents = 0;
+
+uclock_t uclock()
+{
+ struct timeval tv;
+
+ gettimeofday(&tv, NULL);
+ return ((tv.tv_sec * US_PER_SEC) + tv.tv_usec);
+}
+
+
+void init_event_queue(int n)
+{
+ int i;
+ struct itimerval tv;
+
+ g_maxevents = n;
+ event_freelist = (struct event *) malloc(n * sizeof(struct event));
+ memset(event_freelist, 0, n * sizeof(struct event));
+
+ for (i = 0; i < (n-1); i++)
+ event_freelist[i].next = &event_freelist[i+1];
+
+ event_freelist[i].next = NULL;
+
+ tv.it_interval.tv_sec = 0;
+ tv.it_interval.tv_usec = 1;
+ tv.it_value.tv_sec = 0;
+ tv.it_value.tv_usec = 0;
+ setitimer (ITIMER_REAL, &tv, 0);
+ setitimer (ITIMER_REAL, 0, &tv);
+ g_granularity = tv.it_interval.tv_usec;
+
+ signal(SIGALRM, alarm_handler);
+}
+
+
+int clock_gettime(
+ clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */
+ struct timespec * tp /* where to store current time */
+)
+{
+ struct timeval tv;
+ int n;
+
+
+ n = gettimeofday(&tv, NULL);
+ TIMEVAL_TO_TIMESPEC(&tv, tp);
+
+ return n;
+}
+
+
+int timer_create(
+ clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */
+ struct sigevent * evp, /* user event handler */
+ timer_t * pTimer /* ptr to return value */
+)
+{
+ struct event *event;
+
+ if (clock_id != CLOCK_REALTIME) {
+ TIMERDBG("timer_create can only support clock id CLOCK_REALTIME");
+ exit(1);
+ }
+
+ if (evp != NULL) {
+ if (evp->sigev_notify != SIGEV_SIGNAL || evp->sigev_signo != SIGALRM) {
+ TIMERDBG("timer_create can only support signalled alarms using SIGALRM");
+ exit(1);
+ }
+ }
+
+ event = event_freelist;
+ if (event == NULL) {
+ print_event_queue();
+ }
+ assert(event != NULL);
+
+ event->flags = TFLAG_NONE;
+
+ event_freelist = event->next;
+ event->next = NULL;
+
+ check_event_queue();
+
+ *pTimer = (timer_t) event;
+
+ return 0;
+}
+
+int timer_delete(
+ timer_t timerid /* timer ID */
+)
+{
+ struct event *event = (struct event *) timerid;
+
+ if (event->flags & TFLAG_DELETED) {
+ TIMERDBG("Cannot delete a deleted event");
+ return 1;
+ }
+
+ timer_cancel(timerid);
+
+ event->flags |= TFLAG_DELETED;
+
+ event->next = event_freelist;
+ event_freelist = event;
+
+ return 0;
+}
+
+int timer_connect
+(
+ timer_t timerid, /* timer ID */
+ void (*routine)(timer_t, int), /* user routine */
+ int arg /* user argument */
+)
+{
+ struct event *event = (struct event *) timerid;
+
+ assert(routine != NULL);
+ event->func = routine;
+ event->arg = arg;
+
+ return 0;
+}
+
+/*
+ * Please Call this function only from the call back functions of the alarm_handler.
+ * This is just a hack
+*/
+int timer_change_settime
+(
+ timer_t timerid, /* timer ID */
+ const struct itimerspec * value /* time to be set */
+)
+{
+ struct event *event = (struct event *) timerid;
+
+ TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval);
+ TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value);
+
+ return 1;
+}
+
+int timer_settime
+(
+ timer_t timerid, /* timer ID */
+ int flags, /* absolute or relative */
+ const struct itimerspec * value, /* time to be set */
+ struct itimerspec * ovalue /* previous time set (NULL=no result) */
+)
+{
+ struct itimerval itimer;
+ struct event *event = (struct event *) timerid;
+ struct event **ppevent;
+
+ TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval);
+ TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value);
+
+ /* if .it_value is zero, the timer is disarmed */
+ if (!timerisset(&event->it_value)) {
+ timer_cancel(timerid);
+ return 0;
+ }
+
+ block_timer();
+
+#ifdef TIMER_PROFILE
+ event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS);
+ event->start = uclock();
+#endif
+ if (event->next) {
+ TIMERDBG("calling timer_settime with a timer that is already on the queue.");
+ }
+
+
+ /* We always want to make sure that the event at the head of the
+ queue has a timeout greater than the itimer granularity.
+ Otherwise we end up with the situation that the time remaining
+ on an itimer is greater than the time at the head of the queue
+ in the first place. */
+ timerroundup(&event->it_value, g_granularity);
+
+ timerclear(&itimer.it_value);
+ getitimer(ITIMER_REAL, &itimer);
+ if (timerisset(&itimer.it_value)) {
+ // reset the top timer to have an interval equal to the remaining interval
+ // when the timer was cancelled.
+ if (event_queue) {
+ if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) {
+ // it is an error if the amount of time remaining is more than the amount of time
+ // requested by the top event.
+ //
+ TIMERDBG("timer_settime: TIMER ERROR!");
+
+ } else {
+ // some portion of the top event has already expired.
+ // Reset the interval of the top event to remaining
+ // time left in that interval.
+ //
+ event_queue->it_value = itimer.it_value;
+
+ // if we were the earliest timer before now, we are still the earliest timer now.
+ // we do not need to reorder the list.
+ }
+ }
+ }
+
+ // Now, march down the list, decrementing the new timer by the
+ // current it_value of each event on the queue.
+ ppevent = &event_queue;
+ while (*ppevent) {
+ if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) {
+ // if the proposed event will trigger sooner than the next event
+ // in the queue, we will insert the new event just before the next one.
+ //
+ // we also need to adjust the delta value to the next event.
+ timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value));
+ break;
+ }
+ // subtract the interval of the next event from the proposed interval.
+ timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value));
+
+ ppevent = &((*ppevent)->next);
+ }
+
+ // we have found our proper place in the queue,
+ // link our new event into the pending event queue.
+ event->next = *ppevent;
+ *ppevent = event;
+
+ check_event_queue();
+
+ // if our new event ended up at the front of the queue, reissue the timer.
+ if (event == event_queue) {
+ timerroundup(&event_queue->it_value, g_granularity);
+ timerclear(&itimer.it_interval);
+ itimer.it_value = event_queue->it_value;
+
+ // we want to be sure to never turn off the timer completely,
+ // so if the next interval is zero, set it to some small value.
+ if (!timerisset(&(itimer.it_value)))
+ itimer.it_value = (struct timeval) { 0, 1 };
+
+ assert(!timerisset(&itimer.it_interval));
+ assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity);
+ assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity);
+ setitimer(ITIMER_REAL, &itimer, NULL);
+ check_timer();
+ }
+
+ event->flags &= ~TFLAG_CANCELLED;
+
+ unblock_timer();
+
+ return 0;
+}
+
+static void check_timer()
+{
+ struct itimerval itimer;
+
+ getitimer(ITIMER_REAL, &itimer);
+ if (timerisset(&itimer.it_interval)) {
+ TIMERDBG("ERROR timer interval is set.");
+ }
+ if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) {
+ TIMERDBG("ERROR timer expires later than top event.");
+ }
+}
+
+
+static void check_event_queue()
+{
+ struct timeval sum;
+ struct event *event;
+ int i = 0;
+
+#ifdef notdef
+ int nfree = 0;
+ struct event *p;
+ for (p = event_freelist; p; p = p->next)
+ nfree++;
+ printf("%d free events\n", nfree);
+#endif
+
+ timerclear(&sum);
+ for (event = event_queue; event; event = event->next) {
+ if (i > g_maxevents) {
+ TIMERDBG("timer queue looks like it loops back on itself!");
+ print_event_queue();
+ exit(1);
+ }
+ i++;
+ }
+}
+
+#if THIS_FINDS_USE
+/* The original upnp version has this unused function, so I left it in
+ to maintain the resemblance. */
+static int count_queue(struct event *event_queue)
+{
+ struct event *event;
+ int i = 0;
+ for (event = event_queue; event; event = event->next)
+ i++;
+ return i;
+}
+#endif
+
+static void print_event_queue()
+{
+ struct event *event;
+ int i = 0;
+
+ for (event = event_queue; event; event = event->next) {
+ printf("#%d (0x%x)->0x%x: \t%d sec %d usec\t%p\n",
+ i++, (unsigned int) event, (unsigned int) event->next, (int) event->it_value.tv_sec, (int) event->it_value.tv_usec, event->func);
+ if (i > g_maxevents) {
+ printf("...(giving up)\n");
+ break;
+ }
+ }
+}
+
+// The top element of the event queue must have expired.
+// Remove that element, run its function, and reset the timer.
+// if there is no interval, recycle the event structure.
+static void alarm_handler(int i)
+{
+ struct event *event, **ppevent;
+ struct itimerval itimer;
+ struct timeval small_interval = { 0, g_granularity/2 };
+#ifdef TIMER_PROFILE
+ uint junk;
+ uclock_t end;
+ uint actual;
+#endif
+
+ block_timer();
+
+ // Loop through the event queue and remove the first event plus any
+ // subsequent events that will expire very soon thereafter (within 'small_interval'}.
+ //
+ do {
+ // remove the top event.
+ event = event_queue;
+ event_queue = event_queue->next;
+ event->next = NULL;
+
+#ifdef TIMER_PROFILE
+ end = uclock();
+ actual = ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000));
+ if (actual < 0)
+ junk = end;
+ TIMERDBG("expected %d ms actual %d ms", event->expected_ms, ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000)));
+#endif
+
+ // call the event callback function
+ (*(event->func))((timer_t) event, (int)event->arg);
+
+ /* If the event has been cancelled, do NOT put it back on the queue. */
+ if ( !(event->flags & TFLAG_CANCELLED) ) {
+
+ // if the event is a recurring event, reset the timer and
+ // find its correct place in the sorted list of events.
+ //
+ if (timerisset(&event->it_interval)) {
+ // event is recurring...
+ //
+ event->it_value = event->it_interval;
+#ifdef TIMER_PROFILE
+ event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS);
+ event->start = uclock();
+#endif
+ timerroundup(&event->it_value, g_granularity);
+
+ // Now, march down the list, decrementing the new timer by the
+ // current delta of each event on the queue.
+ ppevent = &event_queue;
+ while (*ppevent) {
+ if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) {
+ // if the proposed event will trigger sooner than the next event
+ // in the queue, we will insert the new event just before the next one.
+ //
+ // we also need to adjust the delta value to the next event.
+ timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value));
+ break;
+ }
+ timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value));
+ ppevent = &((*ppevent)->next);
+ }
+
+ // we have found our proper place in the queue,
+ // link our new event into the pending event queue.
+ event->next = *ppevent;
+ *ppevent = event;
+ } else {
+ // there is no interval, so recycle the event structure.
+ //timer_delete((timer_t) event);
+ }
+ }
+
+ check_event_queue();
+
+ } while (event_queue && timercmp(&event_queue->it_value, &small_interval, <));
+
+ // re-issue the timer...
+ if (event_queue) {
+ timerroundup(&event_queue->it_value, g_granularity);
+
+ timerclear(&itimer.it_interval);
+ itimer.it_value = event_queue->it_value;
+ // we want to be sure to never turn off the timer completely,
+ // so if the next interval is zero, set it to some small value.
+ if (!timerisset(&(itimer.it_value)))
+ itimer.it_value = (struct timeval) { 0, 1 };
+
+ setitimer(ITIMER_REAL, &itimer, NULL);
+ check_timer();
+ } else {
+ TIMERDBG("There are no events in the queue - timer not reset.");
+ }
+
+ unblock_timer();
+}
+
+static int block_count = 0;
+
+void block_timer()
+{
+ sigset_t set;
+
+ if (block_count++ == 0) {
+ sigemptyset(&set);
+ sigaddset(&set, SIGALRM);
+ sigprocmask(SIG_BLOCK, &set, NULL);
+ }
+}
+
+void unblock_timer()
+{
+ sigset_t set;
+
+ if (--block_count == 0) {
+ sigemptyset(&set);
+ sigaddset(&set, SIGALRM);
+ sigprocmask(SIG_UNBLOCK, &set, NULL);
+ }
+}
+
+void timer_cancel_all()
+{
+ struct itimerval timeroff = { { 0, 0 }, { 0, 0} };
+ struct event *event;
+ struct event **ppevent;
+
+ setitimer(ITIMER_REAL, &timeroff, NULL);
+
+ ppevent = &event_queue;
+ while (*ppevent) {
+ event = *ppevent;
+ *ppevent = event->next;
+ event->next = NULL;
+ }
+}
+
+
+
+void timer_cancel(timer_t timerid)
+{
+ struct itimerval itimer;
+ struct itimerval timeroff = { { 0, 0 }, { 0, 0} };
+ struct event *event = (struct event *) timerid;
+ struct event **ppevent;
+
+ if (event->flags & TFLAG_CANCELLED) {
+ TIMERDBG("Cannot cancel a cancelled event");
+ return;
+ }
+
+ block_timer();
+
+ ppevent = &event_queue;
+ while (*ppevent) {
+ if ( *ppevent == event ) {
+
+ /* RACE CONDITION - if the alarm goes off while we are in
+ this loop, and if the timer we want to cancel is the
+ next to expire, the alarm will end up firing
+ after this routine is complete, causing it to go off early. */
+
+ /* If the cancelled timer is the next to expire,
+ we need to do something special to clean up correctly. */
+ if (event == event_queue && event->next != NULL) {
+ timerclear(&itimer.it_value);
+ getitimer(ITIMER_REAL, &itimer);
+
+ /* subtract the time that has already passed while waiting for this timer... */
+ timersub(&(event->it_value), &(itimer.it_value), &(event->it_value));
+
+ /* and add any remainder to the next timer in the list */
+ timeradd(&(event->next->it_value), &(event->it_value), &(event->next->it_value));
+ }
+
+ *ppevent = event->next;
+ event->next = NULL;
+
+ if (event_queue) {
+ timerroundup(&event_queue->it_value, g_granularity);
+ timerclear(&itimer.it_interval);
+ itimer.it_value = event_queue->it_value;
+
+ /* We want to be sure to never turn off the timer
+ completely if there are more events on the queue,
+ so if the next interval is zero, set it to some
+ small value. */
+
+ if (!timerisset(&(itimer.it_value)))
+ itimer.it_value = (struct timeval) { 0, 1 };
+
+ assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity);
+ assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity);
+ setitimer(ITIMER_REAL, &itimer, NULL);
+ check_timer();
+ } else {
+ setitimer(ITIMER_REAL, &timeroff, NULL);
+ }
+ break;
+ }
+ ppevent = &((*ppevent)->next);
+ }
+
+ event->flags |= TFLAG_CANCELLED;
+
+ unblock_timer();
+}
+
+/*
+* timer related headers
+*/
+#include "bcmtimer.h"
+
+/*
+* locally used global variables and constants
+*/
+
+/*
+* Initialize internal resources used in the timer module. It must be called
+* before any other timer function calls. The param 'timer_entries' is used
+* to pre-allocate fixed number of timer entries.
+*/
+int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id)
+{
+ init_event_queue(timer_entries);
+ *module_id = (bcm_timer_module_id)event_freelist;
+ return 0;
+}
+
+/*
+* Cleanup internal resources used by this timer module. It deletes all
+* pending timer entries from the backend timer system as well.
+*/
+int bcm_timer_module_cleanup(bcm_timer_module_id module_id)
+{
+ module_id = 0;
+ return 0;
+}
+
+/* Enable/Disable timer module */
+int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable)
+{
+ if (enable)
+ unblock_timer();
+ else
+ block_timer();
+ return 0;
+}
+
+int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id)
+{
+ module_id = 0;
+ return timer_create(CLOCK_REALTIME, NULL, (timer_t *)timer_id);
+}
+
+int bcm_timer_delete(bcm_timer_id timer_id)
+{
+ return timer_delete((timer_t)timer_id);
+}
+
+int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *timer_spec)
+{
+ return -1;
+}
+
+int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *timer_spec)
+{
+ return timer_settime((timer_t)timer_id, 0, timer_spec, NULL);
+}
+
+int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data)
+{
+ return timer_connect((timer_t)timer_id, (void *)func, data);
+}
+
+int bcm_timer_cancel(bcm_timer_id timer_id)
+{
+ timer_cancel((timer_t)timer_id);
+ return 0;
+}
+int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec)
+{
+ timer_change_settime((timer_t)timer_id, timer_spec);
+ return 1;
+}
--- /dev/null
+/*
+ * Frontend command-line utility for Linux NVRAM layer
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <typedefs.h>
+#include <bcmnvram.h>
+
+static void
+usage(void)
+{
+ fprintf(stderr, "usage: nvram [get name] [set name=value] [unset name] [show]\n");
+ exit(0);
+}
+
+/* NVRAM utility */
+int
+main(int argc, char **argv)
+{
+ char *name, *value, buf[NVRAM_SPACE];
+ int size;
+
+ /* Skip program name */
+ --argc;
+ ++argv;
+
+ if (!*argv)
+ usage();
+
+ /* Process the remaining arguments. */
+ for (; *argv; argv++) {
+ if (!strncmp(*argv, "get", 3)) {
+ if (*++argv) {
+ if ((value = nvram_get(*argv)))
+ puts(value);
+ }
+ }
+ else if (!strncmp(*argv, "set", 3)) {
+ if (*++argv) {
+ strncpy(value = buf, *argv, sizeof(buf));
+ name = strsep(&value, "=");
+ nvram_set(name, value);
+ }
+ }
+ else if (!strncmp(*argv, "unset", 5)) {
+ if (*++argv)
+ nvram_unset(*argv);
+ }
+ else if (!strncmp(*argv, "commit", 5)) {
+ nvram_commit();
+ }
+ else if (!strncmp(*argv, "show", 4) ||
+ !strncmp(*argv, "getall", 6)) {
+ nvram_getall(buf, sizeof(buf));
+ for (name = buf; *name; name += strlen(name) + 1)
+ puts(name);
+ size = sizeof(struct nvram_header) + (int) name - (int) buf;
+ fprintf(stderr, "size: %d bytes (%d left)\n", size, NVRAM_SPACE - size);
+ }
+ if (!*argv)
+ break;
+ }
+
+ return 0;
+}
--- /dev/null
+
+#define WL(a) "wl_"a
+#define WL0(a) "wl0_"a
+#define D11G(a) "d11g_"a
+
+#define PPP(a) "ppp_"a
+#define PPPOE(a) "pppoe_"a
+
+struct nvram_convert {
+ char *name; // for WEB
+ char *wl0_name; // for driver
+ char *d11g_name; // for old nv name
+};
+
+struct nvram_convert nvram_converts[] = {
+ // Bellow change from 3.11.48.7
+ { WL("ssid"), WL0("ssid"), ""},
+ { WL("radio"), WL0("mode"), ""},
+ { WL("mode"), WL0("mode"), ""},
+ { WL("wds"), WL0("wds"), ""},
+ { WL("auth"), WL0("auth"), ""},
+ { WL("key"), WL0("key"), ""},
+ { WL("key1"), WL0("key1"), ""},
+ { WL("key2"), WL0("key2"), ""},
+ { WL("key3"), WL0("key3"), ""},
+ { WL("key4"), WL0("key4"), ""},
+ { WL("maclist"), WL0("maclist"), ""},
+ { WL("channel"), WL0("channel"), D11G("channel")},
+ { WL("rateset"), WL0("rateset"), D11G("rateset")},
+ { WL("rts"), WL0("rts"), D11G("rts")},
+ { WL("bcn"), WL0("bcn"), D11G("bcn")},
+ { WL("gmode"), WL0("gmode"), "d11g_mode"},
+ { WL("unit"), WL0("unit"), ""},
+ { WL("ifname"), WL0("ifname"), ""},
+ { WL("phytype"), WL0("phytype"), ""},
+ { WL("country"), WL0("country"), ""},
+ { WL("closed"), WL0("closed"), ""},
+ { WL("lazywds"), WL0("lazywds"), ""},
+ { WL("wep"), WL0("wep"), ""},
+ { WL("macmode"), WL0("macmode"), ""},
+ { WL("rate"), WL0("rate"), D11G("rate")},
+ { WL("frag"), WL0("frag"), D11G("frag")},
+ { WL("dtim"), WL0("dtim"), D11G("dtim")},
+ { WL("plcphdr"), WL0("plcphdr"), ""},
+ { WL("gmode_protection"), WL0("gmode_protection"), ""},
+ { WL("radio"), WL0("radio"), ""},
+ // Bellow change from 3.21.9.0
+ { WL("auth_mode"), WL0("auth_mode"), ""},
+ { WL("radius_ipaddr"), WL0("radius_ipaddr"), ""},
+ { WL("radius_port"), WL0("radius_port"), ""},
+ { WL("radius_key"), WL0("radius_key"), ""},
+ { WL("wpa_psk"), WL0("wpa_psk"), ""},
+ { WL("wpa_gtk_rekey"), WL0("wpa_gtk_rekey"), ""},
+ { WL("frameburst"), WL0("frameburst"), ""},
+ { WL("crypto"), WL0("crypto"), ""},
+ { WL("ap_isolate"), WL0("ap_isolate"), ""},
+ { WL("afterburner"), WL0("afterburner"), ""},
+ // for PPPoE
+ { PPP("username"), PPPOE("username"), ""},
+ { PPP("passwd"), PPPOE("passwd"), ""},
+ { PPP("idletime"), PPPOE("idletime"), ""},
+ { PPP("keepalive"), PPPOE("keepalive"), ""},
+ { PPP("demand"), PPPOE("demand"), ""},
+ { PPP("service"), PPPOE("service"), ""},
+ { PPP("ac"), PPPOE("ac"), ""},
+ { PPP("static"), PPPOE("static"), ""},
+ { PPP("static_ip"), PPPOE("static_ip"), ""},
+ { PPP("username_1"), PPPOE("username_1"), ""},
+ { PPP("passwd_1"), PPPOE("passwd_1"), ""},
+ { PPP("idletime_1"), PPPOE("idletime_1"), ""},
+ { PPP("keepalive_1"), PPPOE("keepalive_1"), ""},
+ { PPP("demand_1"), PPPOE("demand_1"), ""},
+ { PPP("service_1"), PPPOE("service_1"), ""},
+ { PPP("ac_1"), PPPOE("ac_1"), ""},
+
+ { 0, 0, 0},
+};
--- /dev/null
+
+struct nvram_convert {
+ char *name;
+ char *wl0_name;
+ char *d11g_name;
+};
+
--- /dev/null
+/*
+ * NVRAM variable manipulation (Linux user mode half)
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <error.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+#include <typedefs.h>
+#include <bcmnvram.h>
+#include <nvram_convert.h>
+#include <shutils.h>
+#include <utils.h>
+
+#define PATH_DEV_NVRAM "/dev/nvram"
+
+/* Globals */
+static int nvram_fd = -1;
+static char *nvram_buf = NULL;
+int check_action(void);
+int file_to_buf(char *path, char *buf, int len);
+
+int
+nvram_init(void *unused)
+{
+ if ((nvram_fd = open(PATH_DEV_NVRAM, O_RDWR)) < 0)
+ goto err;
+
+ /* Map kernel string buffer into user space */
+ if ((nvram_buf = mmap(NULL, NVRAM_SPACE, PROT_READ, MAP_SHARED, nvram_fd, 0)) == MAP_FAILED) {
+ close(nvram_fd);
+ nvram_fd = -1;
+ goto err;
+ }
+
+ return 0;
+
+ err:
+ perror(PATH_DEV_NVRAM);
+ return errno;
+}
+
+char *
+nvram_get(const char *name)
+{
+ size_t count = strlen(name) + 1;
+ char tmp[100], *value;
+ unsigned long *off = (unsigned long *) tmp;
+
+ if (nvram_fd < 0)
+ if (nvram_init(NULL))
+ return NULL;
+
+ if (count > sizeof(tmp)) {
+ if (!(off = malloc(count)))
+ return NULL;
+ }
+
+ /* Get offset into mmap() space */
+ strcpy((char *) off, name);
+
+ count = read(nvram_fd, off, count);
+
+ if (count == sizeof(unsigned long))
+ value = &nvram_buf[*off];
+ else
+ value = NULL;
+
+ if (count < 0)
+ perror(PATH_DEV_NVRAM);
+
+ if (off != (unsigned long *) tmp)
+ free(off);
+
+ return value;
+}
+
+int
+nvram_getall(char *buf, int count)
+{
+ int ret;
+
+ if (nvram_fd < 0)
+ if ((ret = nvram_init(NULL)))
+ return ret;
+
+ if (count == 0)
+ return 0;
+
+ /* Get all variables */
+ *buf = '\0';
+
+ ret = read(nvram_fd, buf, count);
+
+ if (ret < 0)
+ perror(PATH_DEV_NVRAM);
+
+ return (ret == count) ? 0 : ret;
+}
+
+static int
+_nvram_set(const char *name, const char *value)
+{
+ size_t count = strlen(name) + 1;
+ char tmp[100], *buf = tmp;
+ int ret;
+
+ if (nvram_fd < 0)
+ if ((ret = nvram_init(NULL)))
+ return ret;
+
+ /* Unset if value is NULL */
+ if (value)
+ count += strlen(value) + 1;
+
+ if (count > sizeof(tmp)) {
+ if (!(buf = malloc(count)))
+ return -ENOMEM;
+ }
+
+ if (value)
+ sprintf(buf, "%s=%s", name, value);
+ else
+ strcpy(buf, name);
+
+ ret = write(nvram_fd, buf, count);
+
+ if (ret < 0)
+ perror(PATH_DEV_NVRAM);
+
+ if (buf != tmp)
+ free(buf);
+
+ return (ret == count) ? 0 : ret;
+}
+
+int
+nvram_set(const char *name, const char *value)
+{
+ extern struct nvram_convert nvram_converts[];
+ struct nvram_convert *v;
+ int ret;
+
+ ret = _nvram_set(name, value);
+
+ for(v = nvram_converts ; v->name ; v++) {
+ if(!strcmp(v->name, name)){
+ if(strcmp(v->wl0_name,"")) _nvram_set(v->wl0_name, value);
+ if(strcmp(v->d11g_name,"")) _nvram_set(v->d11g_name, value);
+ }
+ }
+
+ return ret;
+}
+
+int
+nvram_unset(const char *name)
+{
+ return _nvram_set(name, NULL);
+}
+
+int
+nvram_commit(void)
+{
+ int ret;
+
+ cprintf("nvram_commit(): start\n");
+
+ if((check_action() == ACT_IDLE) ||
+ (check_action() == ACT_SW_RESTORE) ||
+ (check_action() == ACT_HW_RESTORE)){
+ if (nvram_fd < 0)
+ if ((ret = nvram_init(NULL)))
+ return ret;
+
+ ret = ioctl(nvram_fd, NVRAM_MAGIC, NULL);
+
+ if (ret < 0)
+ perror(PATH_DEV_NVRAM);
+
+ cprintf("nvram_commit(): end\n");
+ }
+ else
+ cprintf("nvram_commit(): nothing to do...\n");
+
+ return ret;
+}
+
+int file2nvram(char *filename, char *varname) {
+ FILE *fp;
+ int c,count;
+ int i=0,j=0;
+ char mem[10000],buf[30000];
+
+ if ( !(fp=fopen(filename,"rb") ))
+ return 0;
+
+ count=fread(mem,1,sizeof(mem),fp);
+ fclose(fp);
+ for (j=0;j<count;j++) {
+ if (i > sizeof(buf)-3 )
+ break;
+ c=mem[j];
+ if (c >= 32 && c <= 126 && c != '\\' && c != '~') {
+ buf[i++]=(unsigned char) c;
+ } else if (c==0) {
+ buf[i++]='~';
+ } else {
+ buf[i++]='\\';
+ sprintf(buf+i,"%02X",c);
+ i+=2;
+ }
+ }
+ if (i==0) return 0;
+ buf[i]=0;
+ //fprintf(stderr,"================ > file2nvram %s = [%s] \n",varname,buf);
+ nvram_set(varname,buf);
+ //nvram_commit(); //Barry adds for test
+}
+
+int nvram2file(char *varname, char *filename) {
+ FILE *fp;
+ int c,tmp;
+ int i=0,j=0;
+ char *buf;
+ char mem[10000];
+
+ if ( !(fp=fopen(filename,"wb") ))
+ return 0;
+
+ buf=strdup(nvram_safe_get(varname));
+ //fprintf(stderr,"=================> nvram2file %s = [%s] \n",varname,buf);
+ while ( buf[i] && j < sizeof(mem)-3 ) {
+ if (buf[i] == '\\') {
+ i++;
+ tmp=buf[i+2];
+ buf[i+2]=0;
+ sscanf(buf+i,"%02X",&c);
+ buf[i+2]=tmp;
+ i+=2;
+ mem[j]=c;j++;
+ } else if (buf[i] == '~') {
+ mem[j]=0;j++;
+ i++;
+ } else {
+ mem[j]=buf[i];j++;
+ i++;
+ }
+ }
+ if (j<=0) return j;
+ j=fwrite(mem,1,j,fp);
+ fclose(fp);
+ free(buf);
+ return j;
+}
+
+int
+check_action(void)
+{
+ char buf[80] = "";
+
+ if(file_to_buf(ACTION_FILE, buf, sizeof(buf))){
+ if(!strcmp(buf, "ACT_TFTP_UPGRADE")){
+ cprintf("Upgrading from tftp now, quiet exit....\n");
+ return ACT_TFTP_UPGRADE;
+ }
+ else if(!strcmp(buf, "ACT_WEBS_UPGRADE")){
+ cprintf("Upgrading from web (https) now, quiet exit....\n");
+ return ACT_WEBS_UPGRADE;
+ }
+ else if(!strcmp(buf, "ACT_WEB_UPGRADE")){
+ cprintf("Upgrading from web (http) now, quiet exit....\n");
+ return ACT_WEB_UPGRADE;
+ }
+ else if(!strcmp(buf, "ACT_SW_RESTORE")){
+ cprintf("Receive restore command from web, quiet exit....\n");
+ return ACT_SW_RESTORE;
+ }
+ else if(!strcmp(buf, "ACT_HW_RESTORE")){
+ cprintf("Receive restore commond from resetbutton, quiet exit....\n");
+ return ACT_HW_RESTORE;
+ }
+ }
+ //fprintf(stderr, "Waiting for upgrading....\n");
+ return ACT_IDLE;
+}
+
+int
+file_to_buf(char *path, char *buf, int len)
+{
+ FILE *fp;
+
+ memset(buf, 0 , len);
+
+ if ((fp = fopen(path, "r"))) {
+ fgets(buf, len, fp);
+ fclose(fp);
+ return 1;
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * Shell-like utility functions
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <error.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <unistd.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+#include <termios.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <net/ethernet.h>
+
+#include <shutils.h>
+
+/*
+ * Reads file and returns contents
+ * @param fd file descriptor
+ * @return contents of file or NULL if an error occurred
+ */
+char *
+fd2str(int fd)
+{
+ char *buf = NULL;
+ size_t count = 0, n;
+
+ do {
+ buf = realloc(buf, count + 512);
+ n = read(fd, buf + count, 512);
+ if (n < 0) {
+ free(buf);
+ buf = NULL;
+ }
+ count += n;
+ } while (n == 512);
+
+ close(fd);
+ if (buf)
+ buf[count] = '\0';
+ return buf;
+}
+
+/*
+ * Reads file and returns contents
+ * @param path path to file
+ * @return contents of file or NULL if an error occurred
+ */
+char *
+file2str(const char *path)
+{
+ int fd;
+
+ if ((fd = open(path, O_RDONLY)) == -1) {
+ perror(path);
+ return NULL;
+ }
+
+ return fd2str(fd);
+}
+
+/*
+ * Waits for a file descriptor to change status or unblocked signal
+ * @param fd file descriptor
+ * @param timeout seconds to wait before timing out or 0 for no timeout
+ * @return 1 if descriptor changed status or 0 if timed out or -1 on error
+ */
+int
+waitfor(int fd, int timeout)
+{
+ fd_set rfds;
+ struct timeval tv = { timeout, 0 };
+
+ FD_ZERO(&rfds);
+ FD_SET(fd, &rfds);
+ return select(fd + 1, &rfds, NULL, NULL, (timeout > 0) ? &tv : NULL);
+}
+
+/*
+ * Concatenates NULL-terminated list of arguments into a single
+ * commmand and executes it
+ * @param argv argument list
+ * @param path NULL, ">output", or ">>output"
+ * @param timeout seconds to wait before timing out or 0 for no timeout
+ * @param ppid NULL to wait for child termination or pointer to pid
+ * @return return value of executed command or errno
+ */
+int
+_eval(char *const argv[], char *path, int timeout, int *ppid)
+{
+ pid_t pid;
+ int status;
+ int fd;
+ int flags;
+ int sig;
+ char buf[254]="";
+ int i;
+
+ switch (pid = fork()) {
+ case -1: /* error */
+ perror("fork");
+ return errno;
+ case 0: /* child */
+ /* Reset signal handlers set for parent process */
+ for (sig = 0; sig < (_NSIG-1); sig++)
+ signal(sig, SIG_DFL);
+
+ /* Clean up */
+ ioctl(0, TIOCNOTTY, 0);
+ close(STDIN_FILENO);
+ close(STDOUT_FILENO);
+ close(STDERR_FILENO);
+ setsid();
+
+ /* We want to check the board if exist UART? , add by honor 2003-12-04 */
+ if ((fd = open("/dev/console", O_RDWR)) < 0) {
+ (void) open("/dev/null", O_RDONLY);
+ (void) open("/dev/null", O_WRONLY);
+ (void) open("/dev/null", O_WRONLY);
+ }
+ else{
+ close(fd);
+ (void) open("/dev/console", O_RDONLY);
+ (void) open("/dev/console", O_WRONLY);
+ (void) open("/dev/console", O_WRONLY);
+ }
+
+ /* Redirect stdout to <path> */
+ if (path) {
+ flags = O_WRONLY | O_CREAT;
+ if (!strncmp(path, ">>", 2)) {
+ /* append to <path> */
+ flags |= O_APPEND;
+ path += 2;
+ } else if (!strncmp(path, ">", 1)) {
+ /* overwrite <path> */
+ flags |= O_TRUNC;
+ path += 1;
+ }
+ if ((fd = open(path, flags, 0644)) < 0)
+ perror(path);
+ else {
+ dup2(fd, STDOUT_FILENO);
+ close(fd);
+ }
+ }
+
+ /* execute command */
+ for(i=0 ; argv[i] ; i++)
+ snprintf(buf+strlen(buf), sizeof(buf), "%s ", argv[i]);
+ dprintf("cmd=[%s]\n", buf);
+ setenv("PATH", "/sbin:/bin:/usr/sbin:/usr/bin", 1);
+ alarm(timeout);
+ execvp(argv[0], argv);
+ perror(argv[0]);
+ exit(errno);
+ default: /* parent */
+ if (ppid) {
+ *ppid = pid;
+ return 0;
+ } else {
+ waitpid(pid, &status, 0);
+ if (WIFEXITED(status))
+ return WEXITSTATUS(status);
+ else
+ return status;
+ }
+ }
+}
+
+/*
+ * Concatenates NULL-terminated list of arguments into a single
+ * commmand and executes it
+ * @param argv argument list
+ * @return stdout of executed command or NULL if an error occurred
+ */
+char *
+_backtick(char *const argv[])
+{
+ int filedes[2];
+ pid_t pid;
+ int status;
+ char *buf = NULL;
+
+ /* create pipe */
+ if (pipe(filedes) == -1) {
+ perror(argv[0]);
+ return NULL;
+ }
+
+ switch (pid = fork()) {
+ case -1: /* error */
+ return NULL;
+ case 0: /* child */
+ close(filedes[0]); /* close read end of pipe */
+ dup2(filedes[1], 1); /* redirect stdout to write end of pipe */
+ close(filedes[1]); /* close write end of pipe */
+ execvp(argv[0], argv);
+ exit(errno);
+ break;
+ default: /* parent */
+ close(filedes[1]); /* close write end of pipe */
+ buf = fd2str(filedes[0]);
+ waitpid(pid, &status, 0);
+ break;
+ }
+
+ return buf;
+}
+
+/*
+ * Kills process whose PID is stored in plaintext in pidfile
+ * @param pidfile PID file
+ * @return 0 on success and errno on failure
+ */
+int
+kill_pidfile(char *pidfile)
+{
+ FILE *fp = fopen(pidfile, "r");
+ char buf[256];
+
+ if (fp && fgets(buf, sizeof(buf), fp)) {
+ pid_t pid = strtoul(buf, NULL, 0);
+ fclose(fp);
+ return kill(pid, SIGTERM);
+ } else
+ return errno;
+}
+
+/*
+ * fread() with automatic retry on syscall interrupt
+ * @param ptr location to store to
+ * @param size size of each element of data
+ * @param nmemb number of elements
+ * @param stream file stream
+ * @return number of items successfully read
+ */
+int
+safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream)
+{
+ size_t ret = 0;
+
+ do {
+ clearerr(stream);
+ ret += fread((char *)ptr + (ret * size), size, nmemb - ret, stream);
+ } while (ret < nmemb && ferror(stream) && errno == EINTR);
+
+ return ret;
+}
+
+/*
+ * fwrite() with automatic retry on syscall interrupt
+ * @param ptr location to read from
+ * @param size size of each element of data
+ * @param nmemb number of elements
+ * @param stream file stream
+ * @return number of items successfully written
+ */
+int
+safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream)
+{
+ size_t ret = 0;
+
+ do {
+ clearerr(stream);
+ ret += fwrite((char *)ptr + (ret * size), size, nmemb - ret, stream);
+ } while (ret < nmemb && ferror(stream) && errno == EINTR);
+
+ return ret;
+}
+
+/*
+ * Convert Ethernet address string representation to binary data
+ * @param a string in xx:xx:xx:xx:xx:xx notation
+ * @param e binary data
+ * @return TRUE if conversion was successful and FALSE otherwise
+ */
+int
+ether_atoe(const char *a, unsigned char *e)
+{
+ char *c = (char *) a;
+ int i = 0;
+
+ memset(e, 0, ETHER_ADDR_LEN);
+ for (;;) {
+ e[i++] = (unsigned char) strtoul(c, &c, 16);
+ if (!*c++ || i == ETHER_ADDR_LEN)
+ break;
+ }
+ return (i == ETHER_ADDR_LEN);
+}
+
+/*
+ * Convert Ethernet address binary data to string representation
+ * @param e binary data
+ * @param a string in xx:xx:xx:xx:xx:xx notation
+ * @return a
+ */
+char *
+ether_etoa(const unsigned char *e, char *a)
+{
+ char *c = a;
+ int i;
+
+ for (i = 0; i < ETHER_ADDR_LEN; i++) {
+ if (i)
+ *c++ = ':';
+ c += sprintf(c, "%02X", e[i] & 0xff);
+ }
+ return a;
+}
--- /dev/null
+/*
+ * Wireless network adapter utilities
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+#include <string.h>
+
+#include <typedefs.h>
+#include <wlutils.h>
+
+int
+wl_probe(char *name)
+{
+ int ret, val;
+
+ /* Check interface */
+ if ((ret = wl_ioctl(name, WLC_GET_MAGIC, &val, sizeof(val))))
+ return ret;
+ if (val != WLC_IOCTL_MAGIC)
+ return -1;
+ if ((ret = wl_ioctl(name, WLC_GET_VERSION, &val, sizeof(val))))
+ return ret;
+ if (val > WLC_IOCTL_VERSION)
+ return -1;
+
+ return ret;
+}
+
+int
+wl_set_val(char *name, char *var, void *val, int len)
+{
+ char buf[128];
+ int buf_len;
+
+ /* check for overflow */
+ if ((buf_len = strlen(var)) + 1 + len > sizeof(buf))
+ return -1;
+
+ strcpy(buf, var);
+ buf_len += 1;
+
+ /* append int value onto the end of the name string */
+ memcpy(&buf[buf_len], val, len);
+ buf_len += len;
+
+ return wl_ioctl(name, WLC_SET_VAR, buf, buf_len);
+}
+
+int
+wl_get_val(char *name, char *var, void *val, int len)
+{
+ char buf[128];
+ int ret;
+
+ /* check for overflow */
+ if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf))
+ return -1;
+
+ strcpy(buf, var);
+ if ((ret = wl_ioctl(name, WLC_GET_VAR, buf, sizeof(buf))))
+ return ret;
+
+ memcpy(val, buf, len);
+ return 0;
+}
+
+int
+wl_set_int(char *name, char *var, int val)
+{
+ return wl_set_val(name, var, &val, sizeof(val));
+}
+
+int
+wl_get_int(char *name, char *var, int *val)
+{
+ return wl_get_val(name, var, val, sizeof(*val));
+}
+
--- /dev/null
+/*
+ * Wireless network adapter utilities (linux-specific)
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <string.h>
+#include <errno.h>
+#include <sys/ioctl.h>
+#include <net/if.h>
+
+#include <typedefs.h>
+#include <wlioctl.h>
+#include <wlutils.h>
+
+int
+wl_ioctl(char *name, int cmd, void *buf, int len)
+{
+ struct ifreq ifr;
+ wl_ioctl_t ioc;
+ int ret = 0;
+ int s;
+
+ /* open socket to kernel */
+ if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
+ perror("socket");
+ return errno;
+ }
+
+ /* do it */
+ ioc.cmd = cmd;
+ ioc.buf = buf;
+ ioc.len = len;
+ strncpy(ifr.ifr_name, name, IFNAMSIZ);
+ ifr.ifr_data = (caddr_t) &ioc;
+ if ((ret = ioctl(s, SIOCDEVPRIVATE, &ifr)) < 0)
+ if (cmd != WLC_GET_MAGIC)
+ perror(ifr.ifr_name);
+
+ /* cleanup */
+ close(s);
+ return ret;
+}
+
+int
+wl_hwaddr(char *name, unsigned char *hwaddr)
+{
+ struct ifreq ifr;
+ int ret = 0;
+ int s;
+
+ /* open socket to kernel */
+ if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
+ perror("socket");
+ return errno;
+ }
+
+ /* do it */
+ strncpy(ifr.ifr_name, name, IFNAMSIZ);
+ if ((ret = ioctl(s, SIOCGIFHWADDR, &ifr)) == 0)
+ memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETHER_ADDR_LEN);
+
+ /* cleanup */
+ close(s);
+ return ret;
+}
+
+# invoke ipkg with configuration in $(STAGING_DIR)/etc/ipkg.conf
+IPKG := IPKG_INSTROOT=$(TARGET_DIR) IPKG_CONF_DIR=$(IPKG_CONF) $(SCRIPT_DIR)/ipkg -force-defaults -force-depends
+IPKG_STATE_DIR := $(TARGET_DIR)/usr/lib/ipkg
+
define PKG_template
IPKG_$(1):=$(PACKAGE_DIR)/$(2)_$(3)_$(4).ipk
IDIR_$(1):=$(PKG_BUILD_DIR)/ipkg/$(2)
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_src.tar.gz
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
PKG_CAT:=zcat
-PKG_IPK:=$(PACKAGE_DIR)/$(PKG_NAME)_$(PKG_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk
-PKG_IPK_DIR:=$(PKG_BUILD_DIR)/ipkg
+
+include $(TOPDIR)/package/rules.mk
+
+$(eval $(call PKG_template,SER,ser,$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH)))
SER_MODULES := sl tm rr maxfwd usrloc registrar dbtext textops nathelper
SER_MODULE_FILES := $(foreach module,$(SER_MODULES),modules/$(module)/$(module).so)
SER_MODULES := $(patsubst %,modules/%,$(SER_MODULES))
-$(DL_DIR)/$(PKG_SOURCE):
- $(SCRIPT_DIR)/download.pl $(DL_DIR) $(PKG_SOURCE) $(PKG_MD5SUM) $(PKG_SOURCE_URL)
-
-$(PKG_BUILD_DIR)/.patched: $(DL_DIR)/$(PKG_SOURCE)
- $(PKG_CAT) $(DL_DIR)/$(PKG_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- $(PATCH) $(PKG_BUILD_DIR) ./patches
- touch $(PKG_BUILD_DIR)/.patched
-
-$(PKG_BUILD_DIR)/$(PKG_NAME): $(PKG_BUILD_DIR)/.patched
+$(PKG_BUILD_DIR)/.built:
$(MAKE) -C $(PKG_BUILD_DIR) \
extra_defs="-DUSE_PTHREAD_MUTEX " \
CC="$(TARGET_CC)" \
ARCH="$(ARCH)" \
CFLAGS="$(TARGET_CFLAGS)" \
modules all
-
-$(PKG_IPK): $(PKG_BUILD_DIR)/$(PKG_NAME)
- $(SCRIPT_DIR)/make-ipkg-dir.sh $(PKG_IPK_DIR) $(PKG_NAME).control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH)
- mkdir -p $(PKG_IPK_DIR)/usr/sbin
- cp -a $(PKG_BUILD_DIR)/$(PKG_NAME) $(PKG_IPK_DIR)/usr/sbin/
- -$(STRIP) $(PKG_IPK_DIR)/usr/sbin/*
- cp -a $(PKG_BUILD_DIR)/scripts/sc $(PKG_IPK_DIR)/usr/sbin/serctl
- mkdir -p $(PKG_IPK_DIR)/usr/lib/ser/modules
+ touch $@
+
+$(IPKG_SER):
+ mkdir -p $(IDIR_SER)/usr/sbin
+ cp -a $(PKG_BUILD_DIR)/$(PKG_NAME) $(IDIR_SER)/usr/sbin/
+ -$(STRIP) $(IDIR_SER)/usr/sbin/*
+ cp -a $(PKG_BUILD_DIR)/scripts/sc $(IDIR_SER)/usr/sbin/serctl
+ mkdir -p $(IDIR_SER)/usr/lib/ser/modules
(cd $(PKG_BUILD_DIR);\
- cp -a $(SER_MODULE_FILES) $(PKG_IPK_DIR)/usr/lib/ser/modules/; \
+ cp -a $(SER_MODULE_FILES) $(IDIR_SER)/usr/lib/ser/modules/; \
)
- $(STRIP) $(PKG_IPK_DIR)/usr/lib/ser/modules/*
- mkdir -p $(PKG_IPK_DIR)/etc/ser
- cp -a $(PKG_BUILD_DIR)/etc/ser.cfg $(PKG_IPK_DIR)/etc/ser/
- mkdir -p $(PACKAGE_DIR)
- $(IPKG_BUILD) $(PKG_IPK_DIR) $(PACKAGE_DIR)
-
-$(IPKG_STATE_DIR)/info/$(PKG_NAME).list: $(PKG_IPK)
- $(IPKG) install $(PKG_IPK)
-
-source: $(DL_DIR)/$(PKG_SOURCE)
-prepare: $(PKG_BUILD_DIR)/.patched
-compile: $(PKG_IPK)
-install: $(IPKG_STATE_DIR)/info/$(PKG_NAME).list
-
+ $(STRIP) $(IDIR_SER)/usr/lib/ser/modules/*
+ mkdir -p $(IDIR_SER)/etc/ser
+ cp -a $(PKG_BUILD_DIR)/etc/ser.cfg $(IDIR_SER)/etc/ser/
+ $(IPKG_BUILD) $(IDIR_SER) $(PACKAGE_DIR)
-clean:
- rm -rf $(PKG_BUILD_DIR)
- rm -f $(PKG_IPK)
--- /dev/null
+Package: ser
+Priority: optional
+Section: net
+Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
+Source: buildroot internal
+Description: SIP Express Router
+ SIP Express Router (ser) is a high-performance,
+ configurable, free SIP server.
+++ /dev/null
-Package: ser
-Priority: optional
-Section: net
-Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
-Source: buildroot internal
-Description: SIP Express Router
- SIP Express Router (ser) is a high-performance,
- configurable, free SIP server.
--- /dev/null
+config BR2_PACKAGE_WIFICONF
+ tristate "wificonf - replacement utility for wlconf"
+ default y
+ help
+ Replacement utility for wlconf
--- /dev/null
+# $Id$
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=wificonf
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/wificonf
+
+include $(TOPDIR)/package/rules.mk
+
+ifneq ($(BOARD),brcm)
+BR2_PACKAGE_WIFICONF:=m
+endif
+
+$(eval $(call PKG_template,WIFICONF,$(PKG_NAME),$(PKG_RELEASE),$(ARCH)))
+
+$(PKG_BUILD_DIR)/.prepared:
+ mkdir -p $@
+ touch $@
+
+$(PKG_BUILD_DIR)/.built:
+ $(TARGET_CC) $(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include -o $(PKG_BUILD_DIR)/wifi wificonf.c -L$(STAGING_DIR)/usr/lib -lnvram -lshared $(STAGING_DIR)/usr/lib/libiw.so
+ touch $@
+
+$(IPKG_WIFICONF):
+ install -d -m0755 $(IDIR_WIFICONF)/sbin
+ install -m0755 $(PKG_BUILD_DIR)/wifi $(IDIR_WIFICONF)/sbin/
+ $(RSTRIP) $(IDIR_WIFICONF)
+ $(IPKG_BUILD) $(IDIR_WIFICONF) $(PACKAGE_DIR)
--- /dev/null
+Package: wificonf
+Priority: optional
+Section: net
+Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
+Source: buildroot internal
+Description: Replacement utility for wlconf
--- /dev/null
+/*
+ * Wireless Network Adapter configuration utility
+ *
+ * Copyright (C) 2005 Felix Fietkau <nbd@vd-s.ath.cx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <iwlib.h>
+#include <bcmnvram.h>
+#include <shutils.h>
+#include <wlioctl.h>
+
+/*------------------------------------------------------------------*/
+/*
+ * Macro to handle errors when setting WE
+ * Print a nice error message and exit...
+ * We define them as macro so that "return" do the right thing.
+ * The "do {...} while(0)" is a standard trick
+ */
+#define ERR_SET_EXT(rname, request) \
+ fprintf(stderr, "Error for wireless request \"%s\" (%X) :\n", \
+ rname, request)
+
+#define ABORT_ARG_NUM(rname, request) \
+ do { \
+ ERR_SET_EXT(rname, request); \
+ fprintf(stderr, " too few arguments.\n"); \
+ } while(0)
+
+#define ABORT_ARG_TYPE(rname, request, arg) \
+ do { \
+ ERR_SET_EXT(rname, request); \
+ fprintf(stderr, " invalid argument \"%s\".\n", arg); \
+ } while(0)
+
+#define ABORT_ARG_SIZE(rname, request, max) \
+ do { \
+ ERR_SET_EXT(rname, request); \
+ fprintf(stderr, " argument too big (max %d)\n", max); \
+ } while(0)
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to push some Wireless Parameter in the driver
+ * Use standard wrapper and add pretty error message if fail...
+ */
+#define IW_SET_EXT_ERR(skfd, ifname, request, wrq, rname) \
+ do { \
+ if(iw_set_ext(skfd, ifname, request, wrq) < 0) { \
+ ERR_SET_EXT(rname, request); \
+ fprintf(stderr, " SET failed on device %-1.16s ; %s.\n", \
+ ifname, strerror(errno)); \
+ } } while(0)
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to extract some Wireless Parameter out of the driver
+ * Use standard wrapper and add pretty error message if fail...
+ */
+#define IW_GET_EXT_ERR(skfd, ifname, request, wrq, rname) \
+ do { \
+ if(iw_get_ext(skfd, ifname, request, wrq) < 0) { \
+ ERR_SET_EXT(rname, request); \
+ fprintf(stderr, " GET failed on device %-1.16s ; %s.\n", \
+ ifname, strerror(errno)); \
+ } } while(0)
+
+void set_wext_ssid(int skfd, char *ifname);
+
+char *prefix;
+char buffer[128];
+
+char *wl_var(char *name)
+{
+ strcpy(buffer, prefix);
+ strcat(buffer, name);
+}
+
+int nvram_enabled(char *name)
+{
+ return (nvram_match(name, "1") || nvram_match(name, "on") || nvram_match(name, "enabled") || nvram_match(name, "true") || nvram_match(name, "yes") ? 1 : 0);
+}
+
+int nvram_disabled(char *name)
+{
+ return (nvram_match(name, "0") || nvram_match(name, "off") || nvram_match(name, "disabled") || nvram_match(name, "false") || nvram_match(name, "no") ? 1 : 0);
+}
+
+
+int bcom_ioctl(int skfd, char *ifname, int cmd, void *buf, int len)
+{
+ struct ifreq ifr;
+ wl_ioctl_t ioc;
+ int ret;
+
+ ioc.cmd = cmd;
+ ioc.buf = buf;
+ ioc.len = len;
+
+ ifr.ifr_data = (caddr_t) &ioc;
+ strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
+
+ ret = ioctl(skfd, SIOCDEVPRIVATE, &ifr);
+
+ return ret;
+}
+
+int bcom_set_val(int skfd, char *ifname, char *var, void *val, int len)
+{
+ char buf[8192];
+ int ret;
+
+ if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf))
+ return -1;
+
+ strcpy(buf, var);
+
+ if ((ret = bcom_ioctl(skfd, ifname, WLC_GET_VAR, buf, sizeof(buf))))
+ return ret;
+
+ memcpy(val, buf, len);
+ return 0;
+}
+
+int bcom_set_int(int skfd, char *ifname, char *var, int val)
+{
+ return bcom_set_val(skfd, ifname, var, &val, sizeof(val));
+}
+
+void stop_bcom(int skfd, char *ifname)
+{
+ int val = 0;
+ wlc_ssid_t ssid;
+
+ if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0)
+ return;
+
+ ssid.SSID_len = 0;
+ ssid.SSID[0] = 0;
+ bcom_ioctl(skfd, ifname, WLC_SET_SSID, &ssid, sizeof(ssid));
+ bcom_ioctl(skfd, ifname, WLC_DOWN, NULL, 0);
+
+}
+
+void start_bcom(int skfd, char *ifname)
+{
+ int val = 0;
+
+ if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0)
+ return;
+
+ bcom_ioctl(skfd, ifname, WLC_UP, &val, sizeof(val));
+ set_wext_ssid(skfd, ifname);
+}
+
+
+void setup_bcom(int skfd, char *ifname)
+{
+ int val = 0;
+ char buf[8192];
+ char wbuf[80];
+ char *v;
+
+ if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0)
+ return;
+
+ stop_bcom(skfd, ifname);
+
+ /* Set Country */
+ strncpy(buf, nvram_safe_get(wl_var("country_code")), 4);
+ buf[3] = 0;
+ bcom_ioctl(skfd, ifname, 273, buf, 4);
+
+ /* Set up afterburner */
+ val = ABO_AUTO;
+ if (nvram_enabled(wl_var("afterburner")))
+ val = ABO_ON;
+ if (nvram_disabled(wl_var("afterburner")))
+ val = ABO_OFF;
+ bcom_set_val(skfd, ifname, "afterburner_override", &val, sizeof(val));
+
+ /* Set other options */
+ if (v = nvram_get(wl_var("lazywds"))) {
+ val = atoi(v);
+ bcom_ioctl(skfd, ifname, WLC_SET_LAZYWDS, &val, sizeof(val));
+ }
+ if (v = nvram_get(wl_var("frag"))) {
+ val = atoi(v);
+ bcom_ioctl(skfd, ifname, WLC_SET_FRAG, &val, sizeof(val));
+ }
+ if (v = nvram_get(wl_var("dtim"))) {
+ val = atoi(v);
+ bcom_ioctl(skfd, ifname, WLC_SET_DTIMPRD, &val, sizeof(val));
+ }
+ if (v = nvram_get(wl_var("bcn"))) {
+ val = atoi(v);
+ bcom_ioctl(skfd, ifname, WLC_SET_BCNPRD, &val, sizeof(val));
+ }
+ if (v = nvram_get(wl_var("rts"))) {
+ val = atoi(v);
+ bcom_ioctl(skfd, ifname, WLC_SET_RTS, &val, sizeof(val));
+ }
+ if (v = nvram_get(wl_var("antdiv"))) {
+ val = atoi(v);
+ bcom_ioctl(skfd, ifname, WLC_SET_ANTDIV, &val, sizeof(val));
+ }
+ if (v = nvram_get(wl_var("txant"))) {
+ val = atoi(v);
+ bcom_ioctl(skfd, ifname, WLC_SET_TXANT, &val, sizeof(val));
+ }
+
+ val = nvram_enabled(wl_var("closed"));
+ bcom_ioctl(skfd, ifname, WLC_SET_CLOSED, &val, sizeof(val));
+
+ val = nvram_enabled(wl_var("ap_isolate"));
+ bcom_set_int(skfd, ifname, "ap_isolate", val);
+
+ val = nvram_enabled(wl_var("frameburst"));
+ bcom_ioctl(skfd, ifname, WLC_SET_FAKEFRAG, &val, sizeof(val));
+
+ /* Set up MAC list */
+ if (nvram_match(wl_var("macmode"), "allow"))
+ val = WLC_MACMODE_ALLOW;
+ else if (nvram_match(wl_var("macmode"), "deny"))
+ val = WLC_MACMODE_DENY;
+ else
+ val = WLC_MACMODE_DISABLED;
+
+ if ((val != WLC_MACMODE_DISABLED) && (v = nvram_get(wl_var("maclist")))) {
+ struct maclist *mac_list;
+ struct ether_addr *addr;
+ char *next;
+
+ memset(buf, 0, 8192);
+ mac_list = (struct maclist *) buf;
+ addr = mac_list->ea;
+
+ foreach(wbuf, v, next) {
+ if (ether_atoe(wbuf, addr->ether_addr_octet)) {
+ mac_list->count++;
+ addr++;
+ }
+ }
+ bcom_ioctl(skfd, ifname, WLC_SET_MACLIST, buf, sizeof(buf));
+ } else {
+ val = WLC_MACMODE_DISABLED;
+ }
+ bcom_ioctl(skfd, ifname, WLC_SET_MACMODE, &val, sizeof(val));
+
+ if (v = nvram_get(wl_var("wds"))) {
+ struct maclist *wdslist = (struct maclist *) buf;
+ struct ether_addr *addr = wdslist->ea;
+ char *next;
+
+ memset(buf, 0, 8192);
+ foreach(wbuf, v, next) {
+ if (ether_atoe(wbuf, addr->ether_addr_octet)) {
+ wdslist->count++;
+ addr++;
+ }
+ }
+ bcom_ioctl(skfd, ifname, WLC_SET_WDSLIST, buf, sizeof(buf));
+ }
+
+ /* Set up G mode */
+ bcom_ioctl(skfd, ifname, WLC_GET_PHYTYPE, &val, sizeof(val));
+ if (val == 2) {
+ int override = WLC_G_PROTECTION_OFF;
+ int control = WLC_G_PROTECTION_CTL_OFF;
+
+ if (v = nvram_get(wl_var("gmode")))
+ val = atoi(v);
+ else
+ val = 1;
+
+ if (val > 5)
+ val = 1;
+
+ bcom_ioctl(skfd, ifname, WLC_SET_GMODE, &val, sizeof(val));
+
+ if (nvram_match(wl_var("gmode_protection"), "auto")) {
+ override = WLC_G_PROTECTION_AUTO;
+ control = WLC_G_PROTECTION_CTL_OVERLAP;
+ }
+ if (nvram_enabled(wl_var("gmode_protection"))) {
+ override = WLC_G_PROTECTION_ON;
+ control = WLC_G_PROTECTION_CTL_OVERLAP;
+ }
+ bcom_ioctl(skfd, ifname, WLC_SET_GMODE_PROTECTION_CONTROL, &override, sizeof(control));
+ bcom_ioctl(skfd, ifname, WLC_SET_GMODE_PROTECTION_OVERRIDE, &override, sizeof(override));
+
+ if (val = 0) {
+ if (nvram_match(wl_var("plcphdr"), "long"))
+ val = WLC_PLCP_AUTO;
+ else
+ val = WLC_PLCP_SHORT;
+
+ bcom_ioctl(skfd, ifname, WLC_SET_PLCPHDR, &val, sizeof(val));
+ }
+ }
+
+ start_bcom(skfd, ifname);
+
+ if (!(v = nvram_get(wl_var("akm"))))
+ v = nvram_safe_get(wl_var("auth_mode"));
+
+ if (strstr(v, "wpa") || strstr(v, "psk")) {
+ /* Set up WPA */
+ if (nvram_match(wl_var("crypto"), "tkip"))
+ val = TKIP_ENABLED;
+ else if (nvram_match(wl_var("crypto"), "aes"))
+ val = AES_ENABLED;
+ else if (nvram_match(wl_var("crypto"), "tkip+aes"))
+ val = TKIP_ENABLED | AES_ENABLED;
+ else
+ val = 0;
+ bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val));
+
+ if (val && strstr(v, "psk")) {
+ v = nvram_safe_get(wl_var("wpa_psk"));
+
+ if ((strlen(v) >= 8) && (strlen(v) < 63)) {
+ val = 4;
+ bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val));
+
+ bcom_ioctl(skfd, ifname, WLC_GET_AP, &val, sizeof(val));
+ if (!val) {
+ /* Enable in-driver WPA supplicant */
+ wsec_pmk_t pmk;
+
+ pmk.key_len = (unsigned short) strlen(v);
+ pmk.flags = WSEC_PASSPHRASE;
+ strcpy(pmk.key, v);
+ bcom_ioctl(skfd, ifname, WLC_SET_WSEC_PMK, &pmk, sizeof(pmk));
+ bcom_set_int(skfd, ifname, "sup_wpa", 1);
+ }
+ }
+ } else {
+ val = 1;
+ bcom_ioctl(skfd, ifname, WLC_SET_EAP_RESTRICT, &val, sizeof(val));
+ }
+ } else {
+ val = 0;
+
+ bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val));
+ bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val));
+ }
+
+
+}
+
+void set_wext_ssid(int skfd, char *ifname)
+{
+ char *buffer;
+ struct iwreq wrq;
+
+ if (buffer = nvram_get(wl_var("ssid"))) {
+ if (strlen(buffer) > IW_ESSID_MAX_SIZE) {
+ ABORT_ARG_SIZE("Set ESSID", SIOCSIWESSID, IW_ESSID_MAX_SIZE);
+ } else {
+ char essid[IW_ESSID_MAX_SIZE + 1];
+
+ wrq.u.essid.flags = 1;
+ strcpy(essid, buffer);
+ wrq.u.essid.pointer = (caddr_t) essid;
+ wrq.u.essid.length = strlen(essid) + 1;
+ IW_SET_EXT_ERR(skfd, ifname, SIOCSIWESSID, &wrq, "Set ESSID");
+ }
+ }
+}
+void setup_wext_wep(int skfd, char *ifname)
+{
+ int i, keylen;
+ struct iwreq wrq;
+ char keystr[5];
+ char *keyval;
+ unsigned char key[IW_ENCODING_TOKEN_MAX];
+
+ strcpy(keystr, "key1");
+ for (i = 1; i <= 4; i++) {
+ if (keyval = nvram_get(wl_var(keystr))) {
+ keylen = iw_in_key(keyval, key);
+
+ if (keylen > 0) {
+ wrq.u.data.length = keylen;
+ wrq.u.data.pointer = (caddr_t) key;
+ wrq.u.data.flags = i;
+ IW_SET_EXT_ERR(skfd, ifname, SIOCSIWENCODE, &wrq, "Set Encode");
+ }
+ }
+ keystr[3]++;
+ }
+
+
+ i = atoi(nvram_safe_get(wl_var("key")));
+ if (i > 0 && i < 4) {
+ wrq.u.data.flags = i | IW_ENCODE_RESTRICTED;
+ IW_SET_EXT_ERR(skfd, ifname, SIOCSIWENCODE, &wrq, "Set Encode");
+ }
+}
+
+void set_wext_mode(skfd, ifname)
+{
+ struct iwreq wrq;
+ int ap = 0, infra = 0, wet = 0;
+
+ /* Set operation mode */
+ ap = !nvram_match(wl_var("mode"), "sta");
+ infra = !nvram_disabled(wl_var("infra"));
+ wet = nvram_enabled(wl_var("wet"));
+
+ wrq.u.mode = (!infra ? IW_MODE_ADHOC : (ap ? IW_MODE_MASTER : (wet ? IW_MODE_REPEAT : IW_MODE_INFRA)));
+ IW_SET_EXT_ERR(skfd, ifname, SIOCSIWMODE, &wrq, "Set Mode");
+}
+
+void setup_wext(int skfd, char *ifname)
+{
+ char *buffer;
+ struct iwreq wrq;
+
+ /* Set channel */
+ int channel = atoi(nvram_safe_get(wl_var("channel")));
+
+ wrq.u.freq.m = -1;
+ wrq.u.freq.e = 0;
+ wrq.u.freq.flags = 0;
+
+ if (channel > 0) {
+ wrq.u.freq.flags = IW_FREQ_FIXED;
+ wrq.u.freq.m = channel;
+ IW_SET_EXT_ERR(skfd, ifname, SIOCSIWFREQ, &wrq, "Set Frequency");
+ }
+
+
+ /* Disable radio if wlX_radio is set and not enabled */
+ wrq.u.txpower.disabled = nvram_disabled(wl_var("radio"));
+
+ wrq.u.txpower.value = -1;
+ wrq.u.txpower.fixed = 1;
+ wrq.u.txpower.flags = IW_TXPOW_DBM;
+ IW_SET_EXT_ERR(skfd, ifname, SIOCSIWTXPOW, &wrq, "Set Tx Power");
+
+ /* Set up WEP */
+ if (nvram_enabled(wl_var("wep")))
+ setup_wext_wep(skfd, ifname);
+
+ /* Set ESSID */
+ set_wext_ssid(skfd, ifname);
+
+}
+
+
+static int setup_interfaces(int skfd, char *ifname, char *args[], int count)
+{
+ struct iwreq wrq;
+ int rc;
+
+ /* Avoid "Unused parameter" warning */
+ args = args; count = count;
+
+ if(iw_get_ext(skfd, ifname, SIOCGIWNAME, &wrq) < 0)
+ return 0;
+
+ stop_bcom(skfd, ifname);
+ set_wext_mode(skfd, ifname);
+ setup_bcom(skfd, ifname);
+ setup_wext(skfd, ifname);
+
+ prefix[2]++;
+}
+
+int main(int argc, char **argv)
+{
+ int skfd;
+ if((skfd = iw_sockets_open()) < 0) {
+ perror("socket");
+ exit(-1);
+ }
+
+ prefix = strdup("wl0_");
+ iw_enum_devices(skfd, &setup_interfaces, NULL, 0);
+
+ return 0;
+}
BIN_DIR:=$(BASE_DIR)/bin
STAMP_DIR:=$(BUILD_DIR)/stamp
PACKAGE_DIR:=$(BIN_DIR)/packages
-TARGET_DIR:=$(BUILD_DIR)/root
STAMP_DIR:=$(BUILD_DIR)/stamp
TOOL_BUILD_DIR=$(BASE_DIR)/toolchain_build_$(ARCH)$(ARCH_FPU_SUFFIX)
# Strip off the annoying quoting
MULTILIB:=--enable-multilib
endif
-
-# invoke ipkg with configuration in $(STAGING_DIR)/etc/ipkg.conf
-IPKG := IPKG_INSTROOT=$(TARGET_DIR) IPKG_CONF_DIR=$(STAGING_DIR)/etc $(SCRIPT_DIR)/ipkg -force-defaults -force-depends
-IPKG_STATE_DIR := $(TARGET_DIR)/usr/lib/ipkg
-
# invoke ipkg-build with some default options
IPKG_BUILD := PATH="$(TARGET_PATH)" ipkg-build -c -o root -g root
include $(TOPDIR)/rules.mk
include ../rules.mk
-# for testing
-ifeq ($(BOARD),)
-BOARD:=brcm
-endif
-
LINUX_VERSION:=2.4.30
MODULES_SUBDIR:=lib/modules/$(LINUX_VERSION)
LINUX_KCONFIG:=./config/$(BOARD)
KERNEL_IPKG:=$(LINUX_BUILD_DIR)/kernel-$(LINUX_VERSION)-$(BOARD)_$(PKG_RELEASE)_$(ARCH).ipk
KERNEL_IDIR:=$(LINUX_BUILD_DIR)/kernel-ipkg
-PKG_MAKEOPTS:= IPKG="$(IPKG_KERNEL)" \
+KPKG_MAKEOPTS:= IPKG="$(IPKG_KERNEL)" \
BOARD="$(BOARD)" \
TARGET_DIR="$(LINUX_TARGET_DIR)" \
BUILD_DIR="$(LINUX_BUILD_DIR)" \
compile: $(LINUX_DIR)/.modules_done $(TARGETS)
ln -sf $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION) $(LINUX_DIR)
$(MAKE) -C $(TOPDIR)/target/linux/package \
- $(PKG_MAKEOPTS) \
+ $(KPKG_MAKEOPTS) \
compile
install: compile $(TARGET_MODULES_DIR) $(KERNEL_IPKG)
rm -rf $(LINUX_BUILD_DIR)/root*
- cp -a $(BUILD_DIR)/root $(LINUX_BUILD_DIR)/
echo -e 'dest root /\noption offline_root $(LINUX_BUILD_DIR)/root' > $(LINUX_BUILD_DIR)/ipkg.conf
[ "$(INSTALL_TARGETS)" != "" ] && $(IPKG_KERNEL) install $(INSTALL_TARGETS) || true
+ $(MAKE) -C $(TOPDIR)/package \
+ TARGET_DIR="$(LINUX_TARGET_DIR)" \
+ IPKG_CONF="$(LINUX_BUILD_DIR)" \
+ BOARD="$(BOARD)" \
+ install
$(MAKE) -C $(TOPDIR)/target/linux/package \
- $(PKG_MAKEOPTS) \
+ $(KPKG_MAKEOPTS) \
install
mostlyclean:
- rm -f $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION)/.{drivers-unpacked,modules_done}
+ rm -f $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION)/.modules_done
+ rm -f $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION)/.drivers-unpacked
$(MAKE) -C $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION) clean
rm -f $(LINUX_KERNEL) $(LINUX_IMAGE)
package-y += openwrt
ifeq ($(BOARD),brcm)
-package-$(BR2_PACKAGE_WIFICONF) += wificonf
-package-y += nvram
-
ifeq ($(LINUX_VERSION),2.4.30)
package-$(BR2_PACKAGE_KMOD_WLCOMPAT) += wlcompat
+wlcompat-compile: openwrt-compile
endif
-
-nvram-compile: openwrt-compile
endif
all: compile install
+++ /dev/null
-# $Id$
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=nvram
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-
-include $(TOPDIR)/package/rules.mk
-
-BR2_PACKAGE_NVRAM:=y # does not depend on menuconfig
-$(eval $(call PKG_template,NVRAM,nvram,$(PKG_RELEASE),$(ARCH)))
-
-$(PKG_BUILD_DIR)/.prepared:
- mkdir -p $(PKG_BUILD_DIR)
- cp -a ./src/* $(PKG_BUILD_DIR)
- touch $@
-
-$(PKG_BUILD_DIR)/.built:
- $(MAKE) -C $(PKG_BUILD_DIR) \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS) -I $(STAGING_DIR)/usr/include"
- touch $@
-
-$(IPKG_NVRAM):
- mkdir -p $(IDIR_NVRAM)/usr/lib
- cp $(PKG_BUILD_DIR)/*.so $(IDIR_NVRAM)/usr/lib
- mkdir -p $(IDIR_NVRAM)/usr/sbin
- cp $(PKG_BUILD_DIR)/nvram $(IDIR_NVRAM)/usr/sbin
- $(RSTRIP) $(IDIR_NVRAM)
- $(IPKG_BUILD) $(IDIR_NVRAM) $(PACKAGE_DIR)
-
-
-compile: install-dev
-install-dev:
- mkdir -p $(STAGING_DIR)/usr/lib
- cp $(PKG_BUILD_DIR)/*.so $(STAGING_DIR)/usr/lib
-
-
+++ /dev/null
-Package: nvram
-Priority: optional
-Section: sys
-Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
-Source: buildroot internal
-Description: NVRAM utility and libraries for Broadcom hardware
-
+++ /dev/null
-# $Id$
-
-EXTRA_CFLAGS := -c -I. -I../include
-LIBSHARED_OBJS := shutils.o wl.o wl_linux.o defaults.o linux_timer.o
-LIBNVRAM_OBJS := nvram_linux.o nvram_convert.o
-
-all: libshared.so libnvram.so nvram
-
-%.o: %.c
- $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -o $@ $^
-
-libshared.so: $(LIBSHARED_OBJS)
- $(CC) -shared -o $@ $^
-
-libnvram.so: $(LIBNVRAM_OBJS)
- $(CC) -shared -o $@ $^
-
-nvram: main.o
- $(CC) -o $@ $^ -L. -lnvram
-
-clean:
- rm -f *.o *.so nvram
+++ /dev/null
-/*
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Low resolution timer interface. Timer handlers may be called
- * in a deferred manner in a different task context after the
- * timer expires or in the task context from which the timer
- * was created, depending on the implementation.
- *
- * $Id$
- */
-#ifndef __bcmtimer_h__
-#define __bcmtimer_h__
-
-/* ANSI headers */
-#include <time.h>
-
-/* timer ID */
-typedef unsigned int bcm_timer_module_id;
-typedef unsigned int bcm_timer_id;
-
-/* timer callback */
-typedef void (*bcm_timer_cb)(bcm_timer_id id, int data);
-
-/* OS-independant interfaces, applications should call these functions only */
-int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id);
-int bcm_timer_module_cleanup(bcm_timer_module_id module_id);
-int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable);
-int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id);
-int bcm_timer_delete(bcm_timer_id timer_id);
-int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *value);
-int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *value);
-int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data);
-int bcm_timer_cancel(bcm_timer_id timer_id);
-int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec);
-
-#endif /* #ifndef __bcmtimer_h__ */
+++ /dev/null
-/*
- * Router default NVRAM values
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <epivers.h>
-#include <string.h>
-#include <bcmnvram.h>
-#include <typedefs.h>
-#include <wlioctl.h>
-
-#define XSTR(s) STR(s)
-#define STR(s) #s
-
-struct nvram_tuple router_defaults[] = {
- /* OS parameters */
- { "os_name", "", 0 }, /* OS name string */
- { "os_version", EPI_VERSION_STR, 0 }, /* OS revision */
- { "os_date", __DATE__, 0 }, /* OS date */
-
- /* Miscellaneous parameters */
- { "timer_interval", "3600", 0 }, /* Timer interval in seconds */
- { "ntp_server", "192.5.41.40 192.5.41.41 133.100.9.2", 0 }, /* NTP server */
- { "time_zone", "PST8PDT", 0 }, /* Time zone (GNU TZ format) */
- { "log_level", "0", 0 }, /* Bitmask 0:off 1:denied 2:accepted */
- { "upnp_enable", "0", 0 }, /* Start UPnP */
- { "ezc_enable", "1", 0 }, /* Enable EZConfig updates */
- { "ezc_version", "1", 0 }, /* EZConfig version */
- { "is_default", "1", 0 }, /* is it default setting: 1:yes 0:no*/
- { "os_server", "", 0 }, /* URL for getting upgrades */
- { "stats_server", "", 0 }, /* URL for posting stats */
- { "console_loglevel", "1", 0 }, /* Kernel panics only */
-
- /* Big switches */
- { "router_disable", "0", 0 }, /* lan_proto=static lan_stp=0 wan_proto=disabled */
- { "fw_disable", "0", 0 }, /* Disable firewall (allow new connections from the WAN) */
-
- { "log_ipaddr", "", 0 }, /* syslog recipient */
-
- /* LAN H/W parameters */
- { "lan_ifname", "", 0 }, /* LAN interface name */
- { "lan_ifnames", "", 0 }, /* Enslaved LAN interfaces */
- { "lan_hwnames", "", 0 }, /* LAN driver names (e.g. et0) */
- { "lan_hwaddr", "", 0 }, /* LAN interface MAC address */
-
- /* LAN TCP/IP parameters */
- { "lan_proto", "dhcp", 0 }, /* [static|dhcp] */
- { "lan_ipaddr", "192.168.1.1", 0 }, /* LAN IP address */
- { "lan_netmask", "255.255.255.0", 0 }, /* LAN netmask */
- { "lan_stp", "0", 0 }, /* LAN spanning tree protocol */
- { "lan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */
- { "lan_domain", "", 0 }, /* LAN domain name */
- { "lan_lease", "86400", 0 }, /* LAN lease time in seconds */
-
- /* WAN H/W parameters */
- { "wan_ifname", "", 0 }, /* WAN interface name */
- { "wan_ifnames", "", 0 }, /* WAN interface names */
- { "wan_hwname", "", 0 }, /* WAN driver name (e.g. et1) */
- { "wan_hwaddr", "", 0 }, /* WAN interface MAC address */
-
- /* WAN TCP/IP parameters */
- { "wan_proto", "dhcp", 0 }, /* [static|dhcp|pppoe|disabled] */
- { "wan_ipaddr", "0.0.0.0", 0 }, /* WAN IP address */
- { "wan_netmask", "0.0.0.0", 0 }, /* WAN netmask */
- { "wan_gateway", "0.0.0.0", 0 }, /* WAN gateway */
- { "wan_dns", "", 0 }, /* x.x.x.x x.x.x.x ... */
- { "wan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */
- { "wan_hostname", "", 0 }, /* WAN hostname */
- { "wan_domain", "", 0 }, /* WAN domain name */
- { "wan_lease", "86400", 0 }, /* WAN lease time in seconds */
-
- /* PPPoE parameters */
- { "wan_pppoe_ifname", "", 0 }, /* PPPoE enslaved interface */
- { "wan_pppoe_username", "", 0 }, /* PPP username */
- { "wan_pppoe_passwd", "", 0 }, /* PPP password */
- { "wan_pppoe_idletime", "60", 0 }, /* Dial on demand max idle time (seconds) */
- { "wan_pppoe_keepalive", "0", 0 }, /* Restore link automatically */
- { "wan_pppoe_demand", "0", 0 }, /* Dial on demand */
- { "wan_pppoe_mru", "1492", 0 }, /* Negotiate MRU to this value */
- { "wan_pppoe_mtu", "1492", 0 }, /* Negotiate MTU to the smaller of this value or the peer MRU */
- { "wan_pppoe_service", "", 0 }, /* PPPoE service name */
- { "wan_pppoe_ac", "", 0 }, /* PPPoE access concentrator name */
-
- /* Misc WAN parameters */
- { "wan_desc", "", 0 }, /* WAN connection description */
- { "wan_route", "", 0 }, /* Static routes (ipaddr:netmask:gateway:metric:ifname ...) */
- { "wan_primary", "0", 0 }, /* Primary wan connection */
-
- { "wan_unit", "0", 0 }, /* Last configured connection */
-
- /* Filters */
- { "filter_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */
- { "filter_macmode", "deny", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */
- { "filter_client0", "", 0 }, /* [lan_ipaddr0-lan_ipaddr1|*]:lan_port0-lan_port1,proto,enable,day_start-day_end,sec_start-sec_end,desc */
-
- /* Port forwards */
- { "dmz_ipaddr", "", 0 }, /* x.x.x.x (equivalent to 0-60999>dmz_ipaddr:0-60999) */
- { "forward_port0", "", 0 }, /* wan_port0-wan_port1>lan_ipaddr:lan_port0-lan_port1[:,]proto[:,]enable[:,]desc */
- { "autofw_port0", "", 0 }, /* out_proto:out_port,in_proto:in_port0-in_port1>to_port0-to_port1,enable,desc */
-
- /* DHCP server parameters */
- { "dhcp_start", "192.168.1.100", 0 }, /* First assignable DHCP address */
- { "dhcp_end", "192.168.1.150", 0 }, /* Last assignable DHCP address */
- { "dhcp_domain", "wan", 0 }, /* Use WAN domain name first if available (wan|lan) */
- { "dhcp_wins", "wan", 0 }, /* Use WAN WINS first if available (wan|lan) */
-
- /* Web server parameters */
- { "http_username", "", 0 }, /* Username */
- { "http_passwd", "admin", 0 }, /* Password */
- { "http_wanport", "", 0 }, /* WAN port to listen on */
- { "http_lanport", "80", 0 }, /* LAN port to listen on */
-
- /* Wireless parameters */
- { "wl_ifname", "", 0 }, /* Interface name */
- { "wl_hwaddr", "", 0 }, /* MAC address */
- { "wl_phytype", "g", 0 }, /* Current wireless band ("a" (5 GHz), "b" (2.4 GHz), or "g" (2.4 GHz)) */
- { "wl_corerev", "", 0 }, /* Current core revision */
- { "wl_phytypes", "", 0 }, /* List of supported wireless bands (e.g. "ga") */
- { "wl_radioids", "", 0 }, /* List of radio IDs */
- { "wl_ssid", "OpenWrt", 0 }, /* Service set ID (network name) */
- { "wl_country", "", 0 }, /* Country (default obtained from driver) */
- { "wl_radio", "1", 0 }, /* Enable (1) or disable (0) radio */
- { "wl_closed", "0", 0 }, /* Closed (hidden) network */
- { "wl_ap_isolate", "0", 0 }, /* AP isolate mode */
- { "wl_mode", "ap", 0 }, /* AP mode (ap|sta|wds) */
- { "wl_lazywds", "0", 0 }, /* Enable "lazy" WDS mode (0|1) */
- { "wl_wds", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */
- { "wl_wep", "disabled", 0 }, /* WEP data encryption (enabled|disabled) */
- { "wl_auth", "0", 0 }, /* Shared key authentication optional (0) or required (1) */
- { "wl_key", "1", 0 }, /* Current WEP key */
- { "wl_key1", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
- { "wl_key2", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
- { "wl_key3", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
- { "wl_key4", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
- { "wl_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */
- { "wl_macmode", "disabled", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */
- { "wl_channel", "11", 0 }, /* Channel number */
- { "wl_rate", "0", 0 }, /* Rate (bps, 0 for auto) */
- { "wl_rateset", "default", 0 }, /* "default" or "all" or "12" */
- { "wl_frag", "2346", 0 }, /* Fragmentation threshold */
- { "wl_rts", "2347", 0 }, /* RTS threshold */
- { "wl_dtim", "1", 0 }, /* DTIM period */
- { "wl_bcn", "100", 0 }, /* Beacon interval */
- { "wl_plcphdr", "long", 0 }, /* 802.11b PLCP preamble type */
- { "wl_net_mode", "mixed", 0 }, /* 54g mode */
- { "wl_gmode", "6", 0 }, /* 54g mode */
- { "wl_gmode_protection", "auto", 0 }, /* 802.11g RTS/CTS protection (off|auto) */
- { "wl_afterburner", "auto", 0 }, /* AfterBurner */
- { "wl_frameburst", "off", 0 }, /* BRCM Frambursting mode (off|on) */
- { "wl_antdiv", "-1", 0 }, /* Antenna Diversity (-1|0|1|3) */
- { "wl_infra", "1", 0 }, /* Network Type (BSS/IBSS) */
-
- /* WPA parameters */
- { "security_mode", "open", 0 },
- { "wl_auth_mode", "open", 0 }, /* Network authentication mode (open|shared|radius|wpa|psk) */
- { "wl_wpa_psk", "", 0 }, /* WPA pre-shared key */
- { "wl_wpa_gtk_rekey", "3600", 0 }, /* GTK rotation interval */
- { "wl_radius_ipaddr", "", 0 }, /* RADIUS server IP address */
- { "wl_radius_key", "", 0 }, /* RADIUS shared secret */
- { "wl_radius_port", "1812", 0 }, /* RADIUS server UDP port */
- { "wl_crypto", "tkip", 0 }, /* WPA data encryption */
-
-
- { "wl_unit", "0", 0 }, /* Last configured interface */
-
- /* Restore defaults */
- { "restore_defaults", "0", 0 }, /* Set to 0 to not restore defaults on boot */
-
- { 0, 0, 0 }
-};
+++ /dev/null
-/*
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Low resolution timer interface linux specific implementation.
- *
- * $Id$
- */
-
-/*
-* debug facilities
-*/
-#define TIMER_DEBUG 0
-#if TIMER_DEBUG
-#define TIMERDBG(fmt, args...) printf("%s: " fmt "\n" , __FUNCTION__ , ## args)
-#else
-#define TIMERDBG(fmt, args...)
-#endif
-
-
-/*
- * POSIX timer support for Linux. Taken from linux_timer.c in upnp
- */
-
-#define __USE_GNU
-
-
-#include <stdlib.h> // for malloc, free, etc.
-#include <string.h> // for memset, strncasecmp, etc.
-#include <assert.h> // for assert, of course.
-#include <signal.h> // for sigemptyset, etc.
-#include <stdio.h> // for printf, etc.
-#include <sys/time.h>
-#include <time.h>
-
-/* define TIMER_PROFILE to enable code which guages how accurate the timer functions are.
- For each expiring timer the code will print the expected time interval and the actual time interval.
-#define TIMER_PROFILE
-*/
-#undef TIMER_PROFILE
-
-/*
-timer_cancel( ) - cancel a timer
-timer_connect( ) - connect a user routine to the timer signal
-timer_create( ) - allocate a timer using the specified clock for a timing base (POSIX)
-timer_delete( ) - remove a previously created timer (POSIX)
-timer_gettime( ) - get the remaining time before expiration and the reload value (POSIX)
-timer_getoverrun( ) - return the timer expiration overrun (POSIX)
-timer_settime( ) - set the time until the next expiration and arm timer (POSIX)
-nanosleep( ) - suspend the current task until the time interval elapses (POSIX)
-*/
-
-#define MS_PER_SEC 1000
-#define US_PER_SEC 1000000
-#define US_PER_MS 1000
-#define UCLOCKS_PER_SEC 1000000
-
-typedef void (*event_callback_t)(timer_t, int);
-
-#ifndef TIMESPEC_TO_TIMEVAL
-# define TIMESPEC_TO_TIMEVAL(tv, ts) { \
- (tv)->tv_sec = (ts)->tv_sec; \
- (tv)->tv_usec = (ts)->tv_nsec / 1000; \
-}
-#endif
-
-#ifndef TIMEVAL_TO_TIMESPEC
-# define TIMEVAL_TO_TIMESPEC(tv, ts) { \
- (ts)->tv_sec = (tv)->tv_sec; \
- (ts)->tv_nsec = (tv)->tv_usec * 1000; \
-}
-#endif
-
-#define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y))
-
-#define timerroundup(t,g) \
- do { \
- if (!timerisset(t)) (t)->tv_usec=1; \
- if ((t)->tv_sec == 0) (t)->tv_usec=ROUNDUP((t)->tv_usec, g); \
- } while (0)
-
-typedef long uclock_t;
-
-#define TFLAG_NONE 0
-#define TFLAG_CANCELLED (1<<0)
-#define TFLAG_DELETED (1<<1)
-
-struct event {
- struct timeval it_interval;
- struct timeval it_value;
- event_callback_t func;
- int arg;
- unsigned short flags;
- struct event *next;
-#ifdef TIMER_PROFILE
- uint expected_ms;
- uclock_t start;
-#endif
-};
-
-void timer_cancel(timer_t timerid);
-
-static void alarm_handler(int i);
-static void check_event_queue();
-static void print_event_queue();
-static void check_timer();
-#if THIS_FINDS_USE
-static int count_queue(struct event *);
-#endif
-static int timer_change_settime(timer_t timer_id, const struct itimerspec *timer_spec);
-void block_timer();
-void unblock_timer();
-
-static struct event *event_queue = NULL;
-static struct event *event_freelist;
-static uint g_granularity;
-static int g_maxevents = 0;
-
-uclock_t uclock()
-{
- struct timeval tv;
-
- gettimeofday(&tv, NULL);
- return ((tv.tv_sec * US_PER_SEC) + tv.tv_usec);
-}
-
-
-void init_event_queue(int n)
-{
- int i;
- struct itimerval tv;
-
- g_maxevents = n;
- event_freelist = (struct event *) malloc(n * sizeof(struct event));
- memset(event_freelist, 0, n * sizeof(struct event));
-
- for (i = 0; i < (n-1); i++)
- event_freelist[i].next = &event_freelist[i+1];
-
- event_freelist[i].next = NULL;
-
- tv.it_interval.tv_sec = 0;
- tv.it_interval.tv_usec = 1;
- tv.it_value.tv_sec = 0;
- tv.it_value.tv_usec = 0;
- setitimer (ITIMER_REAL, &tv, 0);
- setitimer (ITIMER_REAL, 0, &tv);
- g_granularity = tv.it_interval.tv_usec;
-
- signal(SIGALRM, alarm_handler);
-}
-
-
-int clock_gettime(
- clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */
- struct timespec * tp /* where to store current time */
-)
-{
- struct timeval tv;
- int n;
-
-
- n = gettimeofday(&tv, NULL);
- TIMEVAL_TO_TIMESPEC(&tv, tp);
-
- return n;
-}
-
-
-int timer_create(
- clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */
- struct sigevent * evp, /* user event handler */
- timer_t * pTimer /* ptr to return value */
-)
-{
- struct event *event;
-
- if (clock_id != CLOCK_REALTIME) {
- TIMERDBG("timer_create can only support clock id CLOCK_REALTIME");
- exit(1);
- }
-
- if (evp != NULL) {
- if (evp->sigev_notify != SIGEV_SIGNAL || evp->sigev_signo != SIGALRM) {
- TIMERDBG("timer_create can only support signalled alarms using SIGALRM");
- exit(1);
- }
- }
-
- event = event_freelist;
- if (event == NULL) {
- print_event_queue();
- }
- assert(event != NULL);
-
- event->flags = TFLAG_NONE;
-
- event_freelist = event->next;
- event->next = NULL;
-
- check_event_queue();
-
- *pTimer = (timer_t) event;
-
- return 0;
-}
-
-int timer_delete(
- timer_t timerid /* timer ID */
-)
-{
- struct event *event = (struct event *) timerid;
-
- if (event->flags & TFLAG_DELETED) {
- TIMERDBG("Cannot delete a deleted event");
- return 1;
- }
-
- timer_cancel(timerid);
-
- event->flags |= TFLAG_DELETED;
-
- event->next = event_freelist;
- event_freelist = event;
-
- return 0;
-}
-
-int timer_connect
-(
- timer_t timerid, /* timer ID */
- void (*routine)(timer_t, int), /* user routine */
- int arg /* user argument */
-)
-{
- struct event *event = (struct event *) timerid;
-
- assert(routine != NULL);
- event->func = routine;
- event->arg = arg;
-
- return 0;
-}
-
-/*
- * Please Call this function only from the call back functions of the alarm_handler.
- * This is just a hack
-*/
-int timer_change_settime
-(
- timer_t timerid, /* timer ID */
- const struct itimerspec * value /* time to be set */
-)
-{
- struct event *event = (struct event *) timerid;
-
- TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval);
- TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value);
-
- return 1;
-}
-
-int timer_settime
-(
- timer_t timerid, /* timer ID */
- int flags, /* absolute or relative */
- const struct itimerspec * value, /* time to be set */
- struct itimerspec * ovalue /* previous time set (NULL=no result) */
-)
-{
- struct itimerval itimer;
- struct event *event = (struct event *) timerid;
- struct event **ppevent;
-
- TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval);
- TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value);
-
- /* if .it_value is zero, the timer is disarmed */
- if (!timerisset(&event->it_value)) {
- timer_cancel(timerid);
- return 0;
- }
-
- block_timer();
-
-#ifdef TIMER_PROFILE
- event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS);
- event->start = uclock();
-#endif
- if (event->next) {
- TIMERDBG("calling timer_settime with a timer that is already on the queue.");
- }
-
-
- /* We always want to make sure that the event at the head of the
- queue has a timeout greater than the itimer granularity.
- Otherwise we end up with the situation that the time remaining
- on an itimer is greater than the time at the head of the queue
- in the first place. */
- timerroundup(&event->it_value, g_granularity);
-
- timerclear(&itimer.it_value);
- getitimer(ITIMER_REAL, &itimer);
- if (timerisset(&itimer.it_value)) {
- // reset the top timer to have an interval equal to the remaining interval
- // when the timer was cancelled.
- if (event_queue) {
- if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) {
- // it is an error if the amount of time remaining is more than the amount of time
- // requested by the top event.
- //
- TIMERDBG("timer_settime: TIMER ERROR!");
-
- } else {
- // some portion of the top event has already expired.
- // Reset the interval of the top event to remaining
- // time left in that interval.
- //
- event_queue->it_value = itimer.it_value;
-
- // if we were the earliest timer before now, we are still the earliest timer now.
- // we do not need to reorder the list.
- }
- }
- }
-
- // Now, march down the list, decrementing the new timer by the
- // current it_value of each event on the queue.
- ppevent = &event_queue;
- while (*ppevent) {
- if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) {
- // if the proposed event will trigger sooner than the next event
- // in the queue, we will insert the new event just before the next one.
- //
- // we also need to adjust the delta value to the next event.
- timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value));
- break;
- }
- // subtract the interval of the next event from the proposed interval.
- timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value));
-
- ppevent = &((*ppevent)->next);
- }
-
- // we have found our proper place in the queue,
- // link our new event into the pending event queue.
- event->next = *ppevent;
- *ppevent = event;
-
- check_event_queue();
-
- // if our new event ended up at the front of the queue, reissue the timer.
- if (event == event_queue) {
- timerroundup(&event_queue->it_value, g_granularity);
- timerclear(&itimer.it_interval);
- itimer.it_value = event_queue->it_value;
-
- // we want to be sure to never turn off the timer completely,
- // so if the next interval is zero, set it to some small value.
- if (!timerisset(&(itimer.it_value)))
- itimer.it_value = (struct timeval) { 0, 1 };
-
- assert(!timerisset(&itimer.it_interval));
- assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity);
- assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity);
- setitimer(ITIMER_REAL, &itimer, NULL);
- check_timer();
- }
-
- event->flags &= ~TFLAG_CANCELLED;
-
- unblock_timer();
-
- return 0;
-}
-
-static void check_timer()
-{
- struct itimerval itimer;
-
- getitimer(ITIMER_REAL, &itimer);
- if (timerisset(&itimer.it_interval)) {
- TIMERDBG("ERROR timer interval is set.");
- }
- if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) {
- TIMERDBG("ERROR timer expires later than top event.");
- }
-}
-
-
-static void check_event_queue()
-{
- struct timeval sum;
- struct event *event;
- int i = 0;
-
-#ifdef notdef
- int nfree = 0;
- struct event *p;
- for (p = event_freelist; p; p = p->next)
- nfree++;
- printf("%d free events\n", nfree);
-#endif
-
- timerclear(&sum);
- for (event = event_queue; event; event = event->next) {
- if (i > g_maxevents) {
- TIMERDBG("timer queue looks like it loops back on itself!");
- print_event_queue();
- exit(1);
- }
- i++;
- }
-}
-
-#if THIS_FINDS_USE
-/* The original upnp version has this unused function, so I left it in
- to maintain the resemblance. */
-static int count_queue(struct event *event_queue)
-{
- struct event *event;
- int i = 0;
- for (event = event_queue; event; event = event->next)
- i++;
- return i;
-}
-#endif
-
-static void print_event_queue()
-{
- struct event *event;
- int i = 0;
-
- for (event = event_queue; event; event = event->next) {
- printf("#%d (0x%x)->0x%x: \t%d sec %d usec\t%p\n",
- i++, (unsigned int) event, (unsigned int) event->next, (int) event->it_value.tv_sec, (int) event->it_value.tv_usec, event->func);
- if (i > g_maxevents) {
- printf("...(giving up)\n");
- break;
- }
- }
-}
-
-// The top element of the event queue must have expired.
-// Remove that element, run its function, and reset the timer.
-// if there is no interval, recycle the event structure.
-static void alarm_handler(int i)
-{
- struct event *event, **ppevent;
- struct itimerval itimer;
- struct timeval small_interval = { 0, g_granularity/2 };
-#ifdef TIMER_PROFILE
- uint junk;
- uclock_t end;
- uint actual;
-#endif
-
- block_timer();
-
- // Loop through the event queue and remove the first event plus any
- // subsequent events that will expire very soon thereafter (within 'small_interval'}.
- //
- do {
- // remove the top event.
- event = event_queue;
- event_queue = event_queue->next;
- event->next = NULL;
-
-#ifdef TIMER_PROFILE
- end = uclock();
- actual = ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000));
- if (actual < 0)
- junk = end;
- TIMERDBG("expected %d ms actual %d ms", event->expected_ms, ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000)));
-#endif
-
- // call the event callback function
- (*(event->func))((timer_t) event, (int)event->arg);
-
- /* If the event has been cancelled, do NOT put it back on the queue. */
- if ( !(event->flags & TFLAG_CANCELLED) ) {
-
- // if the event is a recurring event, reset the timer and
- // find its correct place in the sorted list of events.
- //
- if (timerisset(&event->it_interval)) {
- // event is recurring...
- //
- event->it_value = event->it_interval;
-#ifdef TIMER_PROFILE
- event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS);
- event->start = uclock();
-#endif
- timerroundup(&event->it_value, g_granularity);
-
- // Now, march down the list, decrementing the new timer by the
- // current delta of each event on the queue.
- ppevent = &event_queue;
- while (*ppevent) {
- if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) {
- // if the proposed event will trigger sooner than the next event
- // in the queue, we will insert the new event just before the next one.
- //
- // we also need to adjust the delta value to the next event.
- timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value));
- break;
- }
- timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value));
- ppevent = &((*ppevent)->next);
- }
-
- // we have found our proper place in the queue,
- // link our new event into the pending event queue.
- event->next = *ppevent;
- *ppevent = event;
- } else {
- // there is no interval, so recycle the event structure.
- //timer_delete((timer_t) event);
- }
- }
-
- check_event_queue();
-
- } while (event_queue && timercmp(&event_queue->it_value, &small_interval, <));
-
- // re-issue the timer...
- if (event_queue) {
- timerroundup(&event_queue->it_value, g_granularity);
-
- timerclear(&itimer.it_interval);
- itimer.it_value = event_queue->it_value;
- // we want to be sure to never turn off the timer completely,
- // so if the next interval is zero, set it to some small value.
- if (!timerisset(&(itimer.it_value)))
- itimer.it_value = (struct timeval) { 0, 1 };
-
- setitimer(ITIMER_REAL, &itimer, NULL);
- check_timer();
- } else {
- TIMERDBG("There are no events in the queue - timer not reset.");
- }
-
- unblock_timer();
-}
-
-static int block_count = 0;
-
-void block_timer()
-{
- sigset_t set;
-
- if (block_count++ == 0) {
- sigemptyset(&set);
- sigaddset(&set, SIGALRM);
- sigprocmask(SIG_BLOCK, &set, NULL);
- }
-}
-
-void unblock_timer()
-{
- sigset_t set;
-
- if (--block_count == 0) {
- sigemptyset(&set);
- sigaddset(&set, SIGALRM);
- sigprocmask(SIG_UNBLOCK, &set, NULL);
- }
-}
-
-void timer_cancel_all()
-{
- struct itimerval timeroff = { { 0, 0 }, { 0, 0} };
- struct event *event;
- struct event **ppevent;
-
- setitimer(ITIMER_REAL, &timeroff, NULL);
-
- ppevent = &event_queue;
- while (*ppevent) {
- event = *ppevent;
- *ppevent = event->next;
- event->next = NULL;
- }
-}
-
-
-
-void timer_cancel(timer_t timerid)
-{
- struct itimerval itimer;
- struct itimerval timeroff = { { 0, 0 }, { 0, 0} };
- struct event *event = (struct event *) timerid;
- struct event **ppevent;
-
- if (event->flags & TFLAG_CANCELLED) {
- TIMERDBG("Cannot cancel a cancelled event");
- return;
- }
-
- block_timer();
-
- ppevent = &event_queue;
- while (*ppevent) {
- if ( *ppevent == event ) {
-
- /* RACE CONDITION - if the alarm goes off while we are in
- this loop, and if the timer we want to cancel is the
- next to expire, the alarm will end up firing
- after this routine is complete, causing it to go off early. */
-
- /* If the cancelled timer is the next to expire,
- we need to do something special to clean up correctly. */
- if (event == event_queue && event->next != NULL) {
- timerclear(&itimer.it_value);
- getitimer(ITIMER_REAL, &itimer);
-
- /* subtract the time that has already passed while waiting for this timer... */
- timersub(&(event->it_value), &(itimer.it_value), &(event->it_value));
-
- /* and add any remainder to the next timer in the list */
- timeradd(&(event->next->it_value), &(event->it_value), &(event->next->it_value));
- }
-
- *ppevent = event->next;
- event->next = NULL;
-
- if (event_queue) {
- timerroundup(&event_queue->it_value, g_granularity);
- timerclear(&itimer.it_interval);
- itimer.it_value = event_queue->it_value;
-
- /* We want to be sure to never turn off the timer
- completely if there are more events on the queue,
- so if the next interval is zero, set it to some
- small value. */
-
- if (!timerisset(&(itimer.it_value)))
- itimer.it_value = (struct timeval) { 0, 1 };
-
- assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity);
- assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity);
- setitimer(ITIMER_REAL, &itimer, NULL);
- check_timer();
- } else {
- setitimer(ITIMER_REAL, &timeroff, NULL);
- }
- break;
- }
- ppevent = &((*ppevent)->next);
- }
-
- event->flags |= TFLAG_CANCELLED;
-
- unblock_timer();
-}
-
-/*
-* timer related headers
-*/
-#include "bcmtimer.h"
-
-/*
-* locally used global variables and constants
-*/
-
-/*
-* Initialize internal resources used in the timer module. It must be called
-* before any other timer function calls. The param 'timer_entries' is used
-* to pre-allocate fixed number of timer entries.
-*/
-int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id)
-{
- init_event_queue(timer_entries);
- *module_id = (bcm_timer_module_id)event_freelist;
- return 0;
-}
-
-/*
-* Cleanup internal resources used by this timer module. It deletes all
-* pending timer entries from the backend timer system as well.
-*/
-int bcm_timer_module_cleanup(bcm_timer_module_id module_id)
-{
- module_id = 0;
- return 0;
-}
-
-/* Enable/Disable timer module */
-int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable)
-{
- if (enable)
- unblock_timer();
- else
- block_timer();
- return 0;
-}
-
-int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id)
-{
- module_id = 0;
- return timer_create(CLOCK_REALTIME, NULL, (timer_t *)timer_id);
-}
-
-int bcm_timer_delete(bcm_timer_id timer_id)
-{
- return timer_delete((timer_t)timer_id);
-}
-
-int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *timer_spec)
-{
- return -1;
-}
-
-int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *timer_spec)
-{
- return timer_settime((timer_t)timer_id, 0, timer_spec, NULL);
-}
-
-int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data)
-{
- return timer_connect((timer_t)timer_id, (void *)func, data);
-}
-
-int bcm_timer_cancel(bcm_timer_id timer_id)
-{
- timer_cancel((timer_t)timer_id);
- return 0;
-}
-int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec)
-{
- timer_change_settime((timer_t)timer_id, timer_spec);
- return 1;
-}
+++ /dev/null
-/*
- * Frontend command-line utility for Linux NVRAM layer
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <typedefs.h>
-#include <bcmnvram.h>
-
-static void
-usage(void)
-{
- fprintf(stderr, "usage: nvram [get name] [set name=value] [unset name] [show]\n");
- exit(0);
-}
-
-/* NVRAM utility */
-int
-main(int argc, char **argv)
-{
- char *name, *value, buf[NVRAM_SPACE];
- int size;
-
- /* Skip program name */
- --argc;
- ++argv;
-
- if (!*argv)
- usage();
-
- /* Process the remaining arguments. */
- for (; *argv; argv++) {
- if (!strncmp(*argv, "get", 3)) {
- if (*++argv) {
- if ((value = nvram_get(*argv)))
- puts(value);
- }
- }
- else if (!strncmp(*argv, "set", 3)) {
- if (*++argv) {
- strncpy(value = buf, *argv, sizeof(buf));
- name = strsep(&value, "=");
- nvram_set(name, value);
- }
- }
- else if (!strncmp(*argv, "unset", 5)) {
- if (*++argv)
- nvram_unset(*argv);
- }
- else if (!strncmp(*argv, "commit", 5)) {
- nvram_commit();
- }
- else if (!strncmp(*argv, "show", 4) ||
- !strncmp(*argv, "getall", 6)) {
- nvram_getall(buf, sizeof(buf));
- for (name = buf; *name; name += strlen(name) + 1)
- puts(name);
- size = sizeof(struct nvram_header) + (int) name - (int) buf;
- fprintf(stderr, "size: %d bytes (%d left)\n", size, NVRAM_SPACE - size);
- }
- if (!*argv)
- break;
- }
-
- return 0;
-}
+++ /dev/null
-
-#define WL(a) "wl_"a
-#define WL0(a) "wl0_"a
-#define D11G(a) "d11g_"a
-
-#define PPP(a) "ppp_"a
-#define PPPOE(a) "pppoe_"a
-
-struct nvram_convert {
- char *name; // for WEB
- char *wl0_name; // for driver
- char *d11g_name; // for old nv name
-};
-
-struct nvram_convert nvram_converts[] = {
- // Bellow change from 3.11.48.7
- { WL("ssid"), WL0("ssid"), ""},
- { WL("radio"), WL0("mode"), ""},
- { WL("mode"), WL0("mode"), ""},
- { WL("wds"), WL0("wds"), ""},
- { WL("auth"), WL0("auth"), ""},
- { WL("key"), WL0("key"), ""},
- { WL("key1"), WL0("key1"), ""},
- { WL("key2"), WL0("key2"), ""},
- { WL("key3"), WL0("key3"), ""},
- { WL("key4"), WL0("key4"), ""},
- { WL("maclist"), WL0("maclist"), ""},
- { WL("channel"), WL0("channel"), D11G("channel")},
- { WL("rateset"), WL0("rateset"), D11G("rateset")},
- { WL("rts"), WL0("rts"), D11G("rts")},
- { WL("bcn"), WL0("bcn"), D11G("bcn")},
- { WL("gmode"), WL0("gmode"), "d11g_mode"},
- { WL("unit"), WL0("unit"), ""},
- { WL("ifname"), WL0("ifname"), ""},
- { WL("phytype"), WL0("phytype"), ""},
- { WL("country"), WL0("country"), ""},
- { WL("closed"), WL0("closed"), ""},
- { WL("lazywds"), WL0("lazywds"), ""},
- { WL("wep"), WL0("wep"), ""},
- { WL("macmode"), WL0("macmode"), ""},
- { WL("rate"), WL0("rate"), D11G("rate")},
- { WL("frag"), WL0("frag"), D11G("frag")},
- { WL("dtim"), WL0("dtim"), D11G("dtim")},
- { WL("plcphdr"), WL0("plcphdr"), ""},
- { WL("gmode_protection"), WL0("gmode_protection"), ""},
- { WL("radio"), WL0("radio"), ""},
- // Bellow change from 3.21.9.0
- { WL("auth_mode"), WL0("auth_mode"), ""},
- { WL("radius_ipaddr"), WL0("radius_ipaddr"), ""},
- { WL("radius_port"), WL0("radius_port"), ""},
- { WL("radius_key"), WL0("radius_key"), ""},
- { WL("wpa_psk"), WL0("wpa_psk"), ""},
- { WL("wpa_gtk_rekey"), WL0("wpa_gtk_rekey"), ""},
- { WL("frameburst"), WL0("frameburst"), ""},
- { WL("crypto"), WL0("crypto"), ""},
- { WL("ap_isolate"), WL0("ap_isolate"), ""},
- { WL("afterburner"), WL0("afterburner"), ""},
- // for PPPoE
- { PPP("username"), PPPOE("username"), ""},
- { PPP("passwd"), PPPOE("passwd"), ""},
- { PPP("idletime"), PPPOE("idletime"), ""},
- { PPP("keepalive"), PPPOE("keepalive"), ""},
- { PPP("demand"), PPPOE("demand"), ""},
- { PPP("service"), PPPOE("service"), ""},
- { PPP("ac"), PPPOE("ac"), ""},
- { PPP("static"), PPPOE("static"), ""},
- { PPP("static_ip"), PPPOE("static_ip"), ""},
- { PPP("username_1"), PPPOE("username_1"), ""},
- { PPP("passwd_1"), PPPOE("passwd_1"), ""},
- { PPP("idletime_1"), PPPOE("idletime_1"), ""},
- { PPP("keepalive_1"), PPPOE("keepalive_1"), ""},
- { PPP("demand_1"), PPPOE("demand_1"), ""},
- { PPP("service_1"), PPPOE("service_1"), ""},
- { PPP("ac_1"), PPPOE("ac_1"), ""},
-
- { 0, 0, 0},
-};
+++ /dev/null
-
-struct nvram_convert {
- char *name;
- char *wl0_name;
- char *d11g_name;
-};
-
+++ /dev/null
-/*
- * NVRAM variable manipulation (Linux user mode half)
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <errno.h>
-#include <error.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-
-#include <typedefs.h>
-#include <bcmnvram.h>
-#include <nvram_convert.h>
-#include <shutils.h>
-#include <utils.h>
-
-#define PATH_DEV_NVRAM "/dev/nvram"
-
-/* Globals */
-static int nvram_fd = -1;
-static char *nvram_buf = NULL;
-int check_action(void);
-int file_to_buf(char *path, char *buf, int len);
-
-int
-nvram_init(void *unused)
-{
- if ((nvram_fd = open(PATH_DEV_NVRAM, O_RDWR)) < 0)
- goto err;
-
- /* Map kernel string buffer into user space */
- if ((nvram_buf = mmap(NULL, NVRAM_SPACE, PROT_READ, MAP_SHARED, nvram_fd, 0)) == MAP_FAILED) {
- close(nvram_fd);
- nvram_fd = -1;
- goto err;
- }
-
- return 0;
-
- err:
- perror(PATH_DEV_NVRAM);
- return errno;
-}
-
-char *
-nvram_get(const char *name)
-{
- size_t count = strlen(name) + 1;
- char tmp[100], *value;
- unsigned long *off = (unsigned long *) tmp;
-
- if (nvram_fd < 0)
- if (nvram_init(NULL))
- return NULL;
-
- if (count > sizeof(tmp)) {
- if (!(off = malloc(count)))
- return NULL;
- }
-
- /* Get offset into mmap() space */
- strcpy((char *) off, name);
-
- count = read(nvram_fd, off, count);
-
- if (count == sizeof(unsigned long))
- value = &nvram_buf[*off];
- else
- value = NULL;
-
- if (count < 0)
- perror(PATH_DEV_NVRAM);
-
- if (off != (unsigned long *) tmp)
- free(off);
-
- return value;
-}
-
-int
-nvram_getall(char *buf, int count)
-{
- int ret;
-
- if (nvram_fd < 0)
- if ((ret = nvram_init(NULL)))
- return ret;
-
- if (count == 0)
- return 0;
-
- /* Get all variables */
- *buf = '\0';
-
- ret = read(nvram_fd, buf, count);
-
- if (ret < 0)
- perror(PATH_DEV_NVRAM);
-
- return (ret == count) ? 0 : ret;
-}
-
-static int
-_nvram_set(const char *name, const char *value)
-{
- size_t count = strlen(name) + 1;
- char tmp[100], *buf = tmp;
- int ret;
-
- if (nvram_fd < 0)
- if ((ret = nvram_init(NULL)))
- return ret;
-
- /* Unset if value is NULL */
- if (value)
- count += strlen(value) + 1;
-
- if (count > sizeof(tmp)) {
- if (!(buf = malloc(count)))
- return -ENOMEM;
- }
-
- if (value)
- sprintf(buf, "%s=%s", name, value);
- else
- strcpy(buf, name);
-
- ret = write(nvram_fd, buf, count);
-
- if (ret < 0)
- perror(PATH_DEV_NVRAM);
-
- if (buf != tmp)
- free(buf);
-
- return (ret == count) ? 0 : ret;
-}
-
-int
-nvram_set(const char *name, const char *value)
-{
- extern struct nvram_convert nvram_converts[];
- struct nvram_convert *v;
- int ret;
-
- ret = _nvram_set(name, value);
-
- for(v = nvram_converts ; v->name ; v++) {
- if(!strcmp(v->name, name)){
- if(strcmp(v->wl0_name,"")) _nvram_set(v->wl0_name, value);
- if(strcmp(v->d11g_name,"")) _nvram_set(v->d11g_name, value);
- }
- }
-
- return ret;
-}
-
-int
-nvram_unset(const char *name)
-{
- return _nvram_set(name, NULL);
-}
-
-int
-nvram_commit(void)
-{
- int ret;
-
- cprintf("nvram_commit(): start\n");
-
- if((check_action() == ACT_IDLE) ||
- (check_action() == ACT_SW_RESTORE) ||
- (check_action() == ACT_HW_RESTORE)){
- if (nvram_fd < 0)
- if ((ret = nvram_init(NULL)))
- return ret;
-
- ret = ioctl(nvram_fd, NVRAM_MAGIC, NULL);
-
- if (ret < 0)
- perror(PATH_DEV_NVRAM);
-
- cprintf("nvram_commit(): end\n");
- }
- else
- cprintf("nvram_commit(): nothing to do...\n");
-
- return ret;
-}
-
-int file2nvram(char *filename, char *varname) {
- FILE *fp;
- int c,count;
- int i=0,j=0;
- char mem[10000],buf[30000];
-
- if ( !(fp=fopen(filename,"rb") ))
- return 0;
-
- count=fread(mem,1,sizeof(mem),fp);
- fclose(fp);
- for (j=0;j<count;j++) {
- if (i > sizeof(buf)-3 )
- break;
- c=mem[j];
- if (c >= 32 && c <= 126 && c != '\\' && c != '~') {
- buf[i++]=(unsigned char) c;
- } else if (c==0) {
- buf[i++]='~';
- } else {
- buf[i++]='\\';
- sprintf(buf+i,"%02X",c);
- i+=2;
- }
- }
- if (i==0) return 0;
- buf[i]=0;
- //fprintf(stderr,"================ > file2nvram %s = [%s] \n",varname,buf);
- nvram_set(varname,buf);
- //nvram_commit(); //Barry adds for test
-}
-
-int nvram2file(char *varname, char *filename) {
- FILE *fp;
- int c,tmp;
- int i=0,j=0;
- char *buf;
- char mem[10000];
-
- if ( !(fp=fopen(filename,"wb") ))
- return 0;
-
- buf=strdup(nvram_safe_get(varname));
- //fprintf(stderr,"=================> nvram2file %s = [%s] \n",varname,buf);
- while ( buf[i] && j < sizeof(mem)-3 ) {
- if (buf[i] == '\\') {
- i++;
- tmp=buf[i+2];
- buf[i+2]=0;
- sscanf(buf+i,"%02X",&c);
- buf[i+2]=tmp;
- i+=2;
- mem[j]=c;j++;
- } else if (buf[i] == '~') {
- mem[j]=0;j++;
- i++;
- } else {
- mem[j]=buf[i];j++;
- i++;
- }
- }
- if (j<=0) return j;
- j=fwrite(mem,1,j,fp);
- fclose(fp);
- free(buf);
- return j;
-}
-
-int
-check_action(void)
-{
- char buf[80] = "";
-
- if(file_to_buf(ACTION_FILE, buf, sizeof(buf))){
- if(!strcmp(buf, "ACT_TFTP_UPGRADE")){
- cprintf("Upgrading from tftp now, quiet exit....\n");
- return ACT_TFTP_UPGRADE;
- }
- else if(!strcmp(buf, "ACT_WEBS_UPGRADE")){
- cprintf("Upgrading from web (https) now, quiet exit....\n");
- return ACT_WEBS_UPGRADE;
- }
- else if(!strcmp(buf, "ACT_WEB_UPGRADE")){
- cprintf("Upgrading from web (http) now, quiet exit....\n");
- return ACT_WEB_UPGRADE;
- }
- else if(!strcmp(buf, "ACT_SW_RESTORE")){
- cprintf("Receive restore command from web, quiet exit....\n");
- return ACT_SW_RESTORE;
- }
- else if(!strcmp(buf, "ACT_HW_RESTORE")){
- cprintf("Receive restore commond from resetbutton, quiet exit....\n");
- return ACT_HW_RESTORE;
- }
- }
- //fprintf(stderr, "Waiting for upgrading....\n");
- return ACT_IDLE;
-}
-
-int
-file_to_buf(char *path, char *buf, int len)
-{
- FILE *fp;
-
- memset(buf, 0 , len);
-
- if ((fp = fopen(path, "r"))) {
- fgets(buf, len, fp);
- fclose(fp);
- return 1;
- }
-
- return 0;
-}
+++ /dev/null
-/*
- * Shell-like utility functions
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <errno.h>
-#include <error.h>
-#include <fcntl.h>
-#include <limits.h>
-#include <unistd.h>
-#include <signal.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/wait.h>
-#include <termios.h>
-#include <sys/ioctl.h>
-#include <sys/time.h>
-#include <net/ethernet.h>
-
-#include <shutils.h>
-
-/*
- * Reads file and returns contents
- * @param fd file descriptor
- * @return contents of file or NULL if an error occurred
- */
-char *
-fd2str(int fd)
-{
- char *buf = NULL;
- size_t count = 0, n;
-
- do {
- buf = realloc(buf, count + 512);
- n = read(fd, buf + count, 512);
- if (n < 0) {
- free(buf);
- buf = NULL;
- }
- count += n;
- } while (n == 512);
-
- close(fd);
- if (buf)
- buf[count] = '\0';
- return buf;
-}
-
-/*
- * Reads file and returns contents
- * @param path path to file
- * @return contents of file or NULL if an error occurred
- */
-char *
-file2str(const char *path)
-{
- int fd;
-
- if ((fd = open(path, O_RDONLY)) == -1) {
- perror(path);
- return NULL;
- }
-
- return fd2str(fd);
-}
-
-/*
- * Waits for a file descriptor to change status or unblocked signal
- * @param fd file descriptor
- * @param timeout seconds to wait before timing out or 0 for no timeout
- * @return 1 if descriptor changed status or 0 if timed out or -1 on error
- */
-int
-waitfor(int fd, int timeout)
-{
- fd_set rfds;
- struct timeval tv = { timeout, 0 };
-
- FD_ZERO(&rfds);
- FD_SET(fd, &rfds);
- return select(fd + 1, &rfds, NULL, NULL, (timeout > 0) ? &tv : NULL);
-}
-
-/*
- * Concatenates NULL-terminated list of arguments into a single
- * commmand and executes it
- * @param argv argument list
- * @param path NULL, ">output", or ">>output"
- * @param timeout seconds to wait before timing out or 0 for no timeout
- * @param ppid NULL to wait for child termination or pointer to pid
- * @return return value of executed command or errno
- */
-int
-_eval(char *const argv[], char *path, int timeout, int *ppid)
-{
- pid_t pid;
- int status;
- int fd;
- int flags;
- int sig;
- char buf[254]="";
- int i;
-
- switch (pid = fork()) {
- case -1: /* error */
- perror("fork");
- return errno;
- case 0: /* child */
- /* Reset signal handlers set for parent process */
- for (sig = 0; sig < (_NSIG-1); sig++)
- signal(sig, SIG_DFL);
-
- /* Clean up */
- ioctl(0, TIOCNOTTY, 0);
- close(STDIN_FILENO);
- close(STDOUT_FILENO);
- close(STDERR_FILENO);
- setsid();
-
- /* We want to check the board if exist UART? , add by honor 2003-12-04 */
- if ((fd = open("/dev/console", O_RDWR)) < 0) {
- (void) open("/dev/null", O_RDONLY);
- (void) open("/dev/null", O_WRONLY);
- (void) open("/dev/null", O_WRONLY);
- }
- else{
- close(fd);
- (void) open("/dev/console", O_RDONLY);
- (void) open("/dev/console", O_WRONLY);
- (void) open("/dev/console", O_WRONLY);
- }
-
- /* Redirect stdout to <path> */
- if (path) {
- flags = O_WRONLY | O_CREAT;
- if (!strncmp(path, ">>", 2)) {
- /* append to <path> */
- flags |= O_APPEND;
- path += 2;
- } else if (!strncmp(path, ">", 1)) {
- /* overwrite <path> */
- flags |= O_TRUNC;
- path += 1;
- }
- if ((fd = open(path, flags, 0644)) < 0)
- perror(path);
- else {
- dup2(fd, STDOUT_FILENO);
- close(fd);
- }
- }
-
- /* execute command */
- for(i=0 ; argv[i] ; i++)
- snprintf(buf+strlen(buf), sizeof(buf), "%s ", argv[i]);
- dprintf("cmd=[%s]\n", buf);
- setenv("PATH", "/sbin:/bin:/usr/sbin:/usr/bin", 1);
- alarm(timeout);
- execvp(argv[0], argv);
- perror(argv[0]);
- exit(errno);
- default: /* parent */
- if (ppid) {
- *ppid = pid;
- return 0;
- } else {
- waitpid(pid, &status, 0);
- if (WIFEXITED(status))
- return WEXITSTATUS(status);
- else
- return status;
- }
- }
-}
-
-/*
- * Concatenates NULL-terminated list of arguments into a single
- * commmand and executes it
- * @param argv argument list
- * @return stdout of executed command or NULL if an error occurred
- */
-char *
-_backtick(char *const argv[])
-{
- int filedes[2];
- pid_t pid;
- int status;
- char *buf = NULL;
-
- /* create pipe */
- if (pipe(filedes) == -1) {
- perror(argv[0]);
- return NULL;
- }
-
- switch (pid = fork()) {
- case -1: /* error */
- return NULL;
- case 0: /* child */
- close(filedes[0]); /* close read end of pipe */
- dup2(filedes[1], 1); /* redirect stdout to write end of pipe */
- close(filedes[1]); /* close write end of pipe */
- execvp(argv[0], argv);
- exit(errno);
- break;
- default: /* parent */
- close(filedes[1]); /* close write end of pipe */
- buf = fd2str(filedes[0]);
- waitpid(pid, &status, 0);
- break;
- }
-
- return buf;
-}
-
-/*
- * Kills process whose PID is stored in plaintext in pidfile
- * @param pidfile PID file
- * @return 0 on success and errno on failure
- */
-int
-kill_pidfile(char *pidfile)
-{
- FILE *fp = fopen(pidfile, "r");
- char buf[256];
-
- if (fp && fgets(buf, sizeof(buf), fp)) {
- pid_t pid = strtoul(buf, NULL, 0);
- fclose(fp);
- return kill(pid, SIGTERM);
- } else
- return errno;
-}
-
-/*
- * fread() with automatic retry on syscall interrupt
- * @param ptr location to store to
- * @param size size of each element of data
- * @param nmemb number of elements
- * @param stream file stream
- * @return number of items successfully read
- */
-int
-safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream)
-{
- size_t ret = 0;
-
- do {
- clearerr(stream);
- ret += fread((char *)ptr + (ret * size), size, nmemb - ret, stream);
- } while (ret < nmemb && ferror(stream) && errno == EINTR);
-
- return ret;
-}
-
-/*
- * fwrite() with automatic retry on syscall interrupt
- * @param ptr location to read from
- * @param size size of each element of data
- * @param nmemb number of elements
- * @param stream file stream
- * @return number of items successfully written
- */
-int
-safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream)
-{
- size_t ret = 0;
-
- do {
- clearerr(stream);
- ret += fwrite((char *)ptr + (ret * size), size, nmemb - ret, stream);
- } while (ret < nmemb && ferror(stream) && errno == EINTR);
-
- return ret;
-}
-
-/*
- * Convert Ethernet address string representation to binary data
- * @param a string in xx:xx:xx:xx:xx:xx notation
- * @param e binary data
- * @return TRUE if conversion was successful and FALSE otherwise
- */
-int
-ether_atoe(const char *a, unsigned char *e)
-{
- char *c = (char *) a;
- int i = 0;
-
- memset(e, 0, ETHER_ADDR_LEN);
- for (;;) {
- e[i++] = (unsigned char) strtoul(c, &c, 16);
- if (!*c++ || i == ETHER_ADDR_LEN)
- break;
- }
- return (i == ETHER_ADDR_LEN);
-}
-
-/*
- * Convert Ethernet address binary data to string representation
- * @param e binary data
- * @param a string in xx:xx:xx:xx:xx:xx notation
- * @return a
- */
-char *
-ether_etoa(const unsigned char *e, char *a)
-{
- char *c = a;
- int i;
-
- for (i = 0; i < ETHER_ADDR_LEN; i++) {
- if (i)
- *c++ = ':';
- c += sprintf(c, "%02X", e[i] & 0xff);
- }
- return a;
-}
+++ /dev/null
-/*
- * Wireless network adapter utilities
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-#include <string.h>
-
-#include <typedefs.h>
-#include <wlutils.h>
-
-int
-wl_probe(char *name)
-{
- int ret, val;
-
- /* Check interface */
- if ((ret = wl_ioctl(name, WLC_GET_MAGIC, &val, sizeof(val))))
- return ret;
- if (val != WLC_IOCTL_MAGIC)
- return -1;
- if ((ret = wl_ioctl(name, WLC_GET_VERSION, &val, sizeof(val))))
- return ret;
- if (val > WLC_IOCTL_VERSION)
- return -1;
-
- return ret;
-}
-
-int
-wl_set_val(char *name, char *var, void *val, int len)
-{
- char buf[128];
- int buf_len;
-
- /* check for overflow */
- if ((buf_len = strlen(var)) + 1 + len > sizeof(buf))
- return -1;
-
- strcpy(buf, var);
- buf_len += 1;
-
- /* append int value onto the end of the name string */
- memcpy(&buf[buf_len], val, len);
- buf_len += len;
-
- return wl_ioctl(name, WLC_SET_VAR, buf, buf_len);
-}
-
-int
-wl_get_val(char *name, char *var, void *val, int len)
-{
- char buf[128];
- int ret;
-
- /* check for overflow */
- if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf))
- return -1;
-
- strcpy(buf, var);
- if ((ret = wl_ioctl(name, WLC_GET_VAR, buf, sizeof(buf))))
- return ret;
-
- memcpy(val, buf, len);
- return 0;
-}
-
-int
-wl_set_int(char *name, char *var, int val)
-{
- return wl_set_val(name, var, &val, sizeof(val));
-}
-
-int
-wl_get_int(char *name, char *var, int *val)
-{
- return wl_get_val(name, var, val, sizeof(*val));
-}
-
+++ /dev/null
-/*
- * Wireless network adapter utilities (linux-specific)
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <stdio.h>
-#include <unistd.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/ioctl.h>
-#include <net/if.h>
-
-#include <typedefs.h>
-#include <wlioctl.h>
-#include <wlutils.h>
-
-int
-wl_ioctl(char *name, int cmd, void *buf, int len)
-{
- struct ifreq ifr;
- wl_ioctl_t ioc;
- int ret = 0;
- int s;
-
- /* open socket to kernel */
- if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("socket");
- return errno;
- }
-
- /* do it */
- ioc.cmd = cmd;
- ioc.buf = buf;
- ioc.len = len;
- strncpy(ifr.ifr_name, name, IFNAMSIZ);
- ifr.ifr_data = (caddr_t) &ioc;
- if ((ret = ioctl(s, SIOCDEVPRIVATE, &ifr)) < 0)
- if (cmd != WLC_GET_MAGIC)
- perror(ifr.ifr_name);
-
- /* cleanup */
- close(s);
- return ret;
-}
-
-int
-wl_hwaddr(char *name, unsigned char *hwaddr)
-{
- struct ifreq ifr;
- int ret = 0;
- int s;
-
- /* open socket to kernel */
- if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("socket");
- return errno;
- }
-
- /* do it */
- strncpy(ifr.ifr_name, name, IFNAMSIZ);
- if ((ret = ioctl(s, SIOCGIFHWADDR, &ifr)) == 0)
- memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETHER_ADDR_LEN);
-
- /* cleanup */
- close(s);
- return ret;
-}
-
PKG_NAME := base-files-arch
PKG_RELEASE := 1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BOARD)
include $(TOPDIR)/package/rules.mk
-BR2_PACKAGE_OPENWRT:=y # ignore menuconfig
-$(eval $(call PKG_template,OPENWRT,$(PKG_NAME),$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH)))
+IDIR_OPENWRT:=$(PKG_BUILD_DIR)/ipkg
+IPKG_OPENWRT:=$(PACKAGE_DIR)/base-files-$(BOARD)_$(PKG_RELEASE)_$(ARCH).ipk
$(PKG_BUILD_DIR)/.prepared:
mkdir -p $(PKG_BUILD_DIR)
$(PKG_BUILD_DIR)/.built:
touch $@
+
+$(IDIR_OPENWRT):
+ $(SCRIPT_DIR)/make-ipkg-dir.sh $(IDIR_OPENWRT) ipkg/base-files-arch.control $(PKG_RELEASE) $(ARCH)
+ $(SED) s,base-files-arch,base-files-$(BOARD),g $(IDIR_OPENWRT)/CONTROL/control
-$(IPKG_OPENWRT):
+$(IPKG_OPENWRT):
mkdir -p $(IDIR_OPENWRT)/etc
cp files/network.overrides.$(BOARD) $(IDIR_OPENWRT)/etc/network.overrides
$(RSTRIP) $(IDIR_OPENWRT)
+++ /dev/null
-config BR2_PACKAGE_WIFICONF
- tristate "wificonf - replacement utility for wlconf"
- default y
- help
- Replacement utility for wlconf
+++ /dev/null
-# $Id$
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=wificonf
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/wificonf
-
-include $(TOPDIR)/package/rules.mk
-
-
-
-
-$(eval $(call PKG_template,WIFICONF,$(PKG_NAME),$(PKG_RELEASE),$(ARCH)))
-
-$(PKG_BUILD_DIR)/.prepared:
- mkdir -p $@
- touch $@
-
-$(PKG_BUILD_DIR)/.built:
- $(TARGET_CC) $(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include -o $(PKG_BUILD_DIR)/wifi wificonf.c -L$(STAGING_DIR)/usr/lib -lnvram -lshared $(STAGING_DIR)/usr/lib/libiw.so
- touch $@
-
-$(IPKG_WIFICONF):
- install -d -m0755 $(IDIR_WIFICONF)/sbin
- install -m0755 $(PKG_BUILD_DIR)/wifi $(IDIR_WIFICONF)/sbin/
- $(RSTRIP) $(IDIR_WIFICONF)
- $(IPKG_BUILD) $(IDIR_WIFICONF) $(PACKAGE_DIR)
+++ /dev/null
-Package: wificonf
-Priority: optional
-Section: net
-Maintainer: Felix Fietkau <nbd@vd-s.ath.cx>
-Source: buildroot internal
-Description: Replacement utility for wlconf
+++ /dev/null
-/*
- * Wireless Network Adapter configuration utility
- *
- * Copyright (C) 2005 Felix Fietkau <nbd@vd-s.ath.cx>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdio.h>
-#include <unistd.h>
-#include <iwlib.h>
-#include <bcmnvram.h>
-#include <shutils.h>
-#include <wlioctl.h>
-
-/*------------------------------------------------------------------*/
-/*
- * Macro to handle errors when setting WE
- * Print a nice error message and exit...
- * We define them as macro so that "return" do the right thing.
- * The "do {...} while(0)" is a standard trick
- */
-#define ERR_SET_EXT(rname, request) \
- fprintf(stderr, "Error for wireless request \"%s\" (%X) :\n", \
- rname, request)
-
-#define ABORT_ARG_NUM(rname, request) \
- do { \
- ERR_SET_EXT(rname, request); \
- fprintf(stderr, " too few arguments.\n"); \
- } while(0)
-
-#define ABORT_ARG_TYPE(rname, request, arg) \
- do { \
- ERR_SET_EXT(rname, request); \
- fprintf(stderr, " invalid argument \"%s\".\n", arg); \
- } while(0)
-
-#define ABORT_ARG_SIZE(rname, request, max) \
- do { \
- ERR_SET_EXT(rname, request); \
- fprintf(stderr, " argument too big (max %d)\n", max); \
- } while(0)
-
-/*------------------------------------------------------------------*/
-/*
- * Wrapper to push some Wireless Parameter in the driver
- * Use standard wrapper and add pretty error message if fail...
- */
-#define IW_SET_EXT_ERR(skfd, ifname, request, wrq, rname) \
- do { \
- if(iw_set_ext(skfd, ifname, request, wrq) < 0) { \
- ERR_SET_EXT(rname, request); \
- fprintf(stderr, " SET failed on device %-1.16s ; %s.\n", \
- ifname, strerror(errno)); \
- } } while(0)
-
-/*------------------------------------------------------------------*/
-/*
- * Wrapper to extract some Wireless Parameter out of the driver
- * Use standard wrapper and add pretty error message if fail...
- */
-#define IW_GET_EXT_ERR(skfd, ifname, request, wrq, rname) \
- do { \
- if(iw_get_ext(skfd, ifname, request, wrq) < 0) { \
- ERR_SET_EXT(rname, request); \
- fprintf(stderr, " GET failed on device %-1.16s ; %s.\n", \
- ifname, strerror(errno)); \
- } } while(0)
-
-void set_wext_ssid(int skfd, char *ifname);
-
-char *prefix;
-char buffer[128];
-
-char *wl_var(char *name)
-{
- strcpy(buffer, prefix);
- strcat(buffer, name);
-}
-
-int nvram_enabled(char *name)
-{
- return (nvram_match(name, "1") || nvram_match(name, "on") || nvram_match(name, "enabled") || nvram_match(name, "true") || nvram_match(name, "yes") ? 1 : 0);
-}
-
-int nvram_disabled(char *name)
-{
- return (nvram_match(name, "0") || nvram_match(name, "off") || nvram_match(name, "disabled") || nvram_match(name, "false") || nvram_match(name, "no") ? 1 : 0);
-}
-
-
-int bcom_ioctl(int skfd, char *ifname, int cmd, void *buf, int len)
-{
- struct ifreq ifr;
- wl_ioctl_t ioc;
- int ret;
-
- ioc.cmd = cmd;
- ioc.buf = buf;
- ioc.len = len;
-
- ifr.ifr_data = (caddr_t) &ioc;
- strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-
- ret = ioctl(skfd, SIOCDEVPRIVATE, &ifr);
-
- return ret;
-}
-
-int bcom_set_val(int skfd, char *ifname, char *var, void *val, int len)
-{
- char buf[8192];
- int ret;
-
- if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf))
- return -1;
-
- strcpy(buf, var);
-
- if ((ret = bcom_ioctl(skfd, ifname, WLC_GET_VAR, buf, sizeof(buf))))
- return ret;
-
- memcpy(val, buf, len);
- return 0;
-}
-
-int bcom_set_int(int skfd, char *ifname, char *var, int val)
-{
- return bcom_set_val(skfd, ifname, var, &val, sizeof(val));
-}
-
-void stop_bcom(int skfd, char *ifname)
-{
- int val = 0;
- wlc_ssid_t ssid;
-
- if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0)
- return;
-
- ssid.SSID_len = 0;
- ssid.SSID[0] = 0;
- bcom_ioctl(skfd, ifname, WLC_SET_SSID, &ssid, sizeof(ssid));
- bcom_ioctl(skfd, ifname, WLC_DOWN, NULL, 0);
-
-}
-
-void start_bcom(int skfd, char *ifname)
-{
- int val = 0;
-
- if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0)
- return;
-
- bcom_ioctl(skfd, ifname, WLC_UP, &val, sizeof(val));
- set_wext_ssid(skfd, ifname);
-}
-
-
-void setup_bcom(int skfd, char *ifname)
-{
- int val = 0;
- char buf[8192];
- char wbuf[80];
- char *v;
-
- if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0)
- return;
-
- stop_bcom(skfd, ifname);
-
- /* Set Country */
- strncpy(buf, nvram_safe_get(wl_var("country_code")), 4);
- buf[3] = 0;
- bcom_ioctl(skfd, ifname, 273, buf, 4);
-
- /* Set up afterburner */
- val = ABO_AUTO;
- if (nvram_enabled(wl_var("afterburner")))
- val = ABO_ON;
- if (nvram_disabled(wl_var("afterburner")))
- val = ABO_OFF;
- bcom_set_val(skfd, ifname, "afterburner_override", &val, sizeof(val));
-
- /* Set other options */
- if (v = nvram_get(wl_var("lazywds"))) {
- val = atoi(v);
- bcom_ioctl(skfd, ifname, WLC_SET_LAZYWDS, &val, sizeof(val));
- }
- if (v = nvram_get(wl_var("frag"))) {
- val = atoi(v);
- bcom_ioctl(skfd, ifname, WLC_SET_FRAG, &val, sizeof(val));
- }
- if (v = nvram_get(wl_var("dtim"))) {
- val = atoi(v);
- bcom_ioctl(skfd, ifname, WLC_SET_DTIMPRD, &val, sizeof(val));
- }
- if (v = nvram_get(wl_var("bcn"))) {
- val = atoi(v);
- bcom_ioctl(skfd, ifname, WLC_SET_BCNPRD, &val, sizeof(val));
- }
- if (v = nvram_get(wl_var("rts"))) {
- val = atoi(v);
- bcom_ioctl(skfd, ifname, WLC_SET_RTS, &val, sizeof(val));
- }
- if (v = nvram_get(wl_var("antdiv"))) {
- val = atoi(v);
- bcom_ioctl(skfd, ifname, WLC_SET_ANTDIV, &val, sizeof(val));
- }
- if (v = nvram_get(wl_var("txant"))) {
- val = atoi(v);
- bcom_ioctl(skfd, ifname, WLC_SET_TXANT, &val, sizeof(val));
- }
-
- val = nvram_enabled(wl_var("closed"));
- bcom_ioctl(skfd, ifname, WLC_SET_CLOSED, &val, sizeof(val));
-
- val = nvram_enabled(wl_var("ap_isolate"));
- bcom_set_int(skfd, ifname, "ap_isolate", val);
-
- val = nvram_enabled(wl_var("frameburst"));
- bcom_ioctl(skfd, ifname, WLC_SET_FAKEFRAG, &val, sizeof(val));
-
- /* Set up MAC list */
- if (nvram_match(wl_var("macmode"), "allow"))
- val = WLC_MACMODE_ALLOW;
- else if (nvram_match(wl_var("macmode"), "deny"))
- val = WLC_MACMODE_DENY;
- else
- val = WLC_MACMODE_DISABLED;
-
- if ((val != WLC_MACMODE_DISABLED) && (v = nvram_get(wl_var("maclist")))) {
- struct maclist *mac_list;
- struct ether_addr *addr;
- char *next;
-
- memset(buf, 0, 8192);
- mac_list = (struct maclist *) buf;
- addr = mac_list->ea;
-
- foreach(wbuf, v, next) {
- if (ether_atoe(wbuf, addr->ether_addr_octet)) {
- mac_list->count++;
- addr++;
- }
- }
- bcom_ioctl(skfd, ifname, WLC_SET_MACLIST, buf, sizeof(buf));
- } else {
- val = WLC_MACMODE_DISABLED;
- }
- bcom_ioctl(skfd, ifname, WLC_SET_MACMODE, &val, sizeof(val));
-
- if (v = nvram_get(wl_var("wds"))) {
- struct maclist *wdslist = (struct maclist *) buf;
- struct ether_addr *addr = wdslist->ea;
- char *next;
-
- memset(buf, 0, 8192);
- foreach(wbuf, v, next) {
- if (ether_atoe(wbuf, addr->ether_addr_octet)) {
- wdslist->count++;
- addr++;
- }
- }
- bcom_ioctl(skfd, ifname, WLC_SET_WDSLIST, buf, sizeof(buf));
- }
-
- /* Set up G mode */
- bcom_ioctl(skfd, ifname, WLC_GET_PHYTYPE, &val, sizeof(val));
- if (val == 2) {
- int override = WLC_G_PROTECTION_OFF;
- int control = WLC_G_PROTECTION_CTL_OFF;
-
- if (v = nvram_get(wl_var("gmode")))
- val = atoi(v);
- else
- val = 1;
-
- if (val > 5)
- val = 1;
-
- bcom_ioctl(skfd, ifname, WLC_SET_GMODE, &val, sizeof(val));
-
- if (nvram_match(wl_var("gmode_protection"), "auto")) {
- override = WLC_G_PROTECTION_AUTO;
- control = WLC_G_PROTECTION_CTL_OVERLAP;
- }
- if (nvram_enabled(wl_var("gmode_protection"))) {
- override = WLC_G_PROTECTION_ON;
- control = WLC_G_PROTECTION_CTL_OVERLAP;
- }
- bcom_ioctl(skfd, ifname, WLC_SET_GMODE_PROTECTION_CONTROL, &override, sizeof(control));
- bcom_ioctl(skfd, ifname, WLC_SET_GMODE_PROTECTION_OVERRIDE, &override, sizeof(override));
-
- if (val = 0) {
- if (nvram_match(wl_var("plcphdr"), "long"))
- val = WLC_PLCP_AUTO;
- else
- val = WLC_PLCP_SHORT;
-
- bcom_ioctl(skfd, ifname, WLC_SET_PLCPHDR, &val, sizeof(val));
- }
- }
-
- start_bcom(skfd, ifname);
-
- if (!(v = nvram_get(wl_var("akm"))))
- v = nvram_safe_get(wl_var("auth_mode"));
-
- if (strstr(v, "wpa") || strstr(v, "psk")) {
- /* Set up WPA */
- if (nvram_match(wl_var("crypto"), "tkip"))
- val = TKIP_ENABLED;
- else if (nvram_match(wl_var("crypto"), "aes"))
- val = AES_ENABLED;
- else if (nvram_match(wl_var("crypto"), "tkip+aes"))
- val = TKIP_ENABLED | AES_ENABLED;
- else
- val = 0;
- bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val));
-
- if (val && strstr(v, "psk")) {
- v = nvram_safe_get(wl_var("wpa_psk"));
-
- if ((strlen(v) >= 8) && (strlen(v) < 63)) {
- val = 4;
- bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val));
-
- bcom_ioctl(skfd, ifname, WLC_GET_AP, &val, sizeof(val));
- if (!val) {
- /* Enable in-driver WPA supplicant */
- wsec_pmk_t pmk;
-
- pmk.key_len = (unsigned short) strlen(v);
- pmk.flags = WSEC_PASSPHRASE;
- strcpy(pmk.key, v);
- bcom_ioctl(skfd, ifname, WLC_SET_WSEC_PMK, &pmk, sizeof(pmk));
- bcom_set_int(skfd, ifname, "sup_wpa", 1);
- }
- }
- } else {
- val = 1;
- bcom_ioctl(skfd, ifname, WLC_SET_EAP_RESTRICT, &val, sizeof(val));
- }
- } else {
- val = 0;
-
- bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val));
- bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val));
- }
-
-
-}
-
-void set_wext_ssid(int skfd, char *ifname)
-{
- char *buffer;
- struct iwreq wrq;
-
- if (buffer = nvram_get(wl_var("ssid"))) {
- if (strlen(buffer) > IW_ESSID_MAX_SIZE) {
- ABORT_ARG_SIZE("Set ESSID", SIOCSIWESSID, IW_ESSID_MAX_SIZE);
- } else {
- char essid[IW_ESSID_MAX_SIZE + 1];
-
- wrq.u.essid.flags = 1;
- strcpy(essid, buffer);
- wrq.u.essid.pointer = (caddr_t) essid;
- wrq.u.essid.length = strlen(essid) + 1;
- IW_SET_EXT_ERR(skfd, ifname, SIOCSIWESSID, &wrq, "Set ESSID");
- }
- }
-}
-void setup_wext_wep(int skfd, char *ifname)
-{
- int i, keylen;
- struct iwreq wrq;
- char keystr[5];
- char *keyval;
- unsigned char key[IW_ENCODING_TOKEN_MAX];
-
- strcpy(keystr, "key1");
- for (i = 1; i <= 4; i++) {
- if (keyval = nvram_get(wl_var(keystr))) {
- keylen = iw_in_key(keyval, key);
-
- if (keylen > 0) {
- wrq.u.data.length = keylen;
- wrq.u.data.pointer = (caddr_t) key;
- wrq.u.data.flags = i;
- IW_SET_EXT_ERR(skfd, ifname, SIOCSIWENCODE, &wrq, "Set Encode");
- }
- }
- keystr[3]++;
- }
-
-
- i = atoi(nvram_safe_get(wl_var("key")));
- if (i > 0 && i < 4) {
- wrq.u.data.flags = i | IW_ENCODE_RESTRICTED;
- IW_SET_EXT_ERR(skfd, ifname, SIOCSIWENCODE, &wrq, "Set Encode");
- }
-}
-
-void set_wext_mode(skfd, ifname)
-{
- struct iwreq wrq;
- int ap = 0, infra = 0, wet = 0;
-
- /* Set operation mode */
- ap = !nvram_match(wl_var("mode"), "sta");
- infra = !nvram_disabled(wl_var("infra"));
- wet = nvram_enabled(wl_var("wet"));
-
- wrq.u.mode = (!infra ? IW_MODE_ADHOC : (ap ? IW_MODE_MASTER : (wet ? IW_MODE_REPEAT : IW_MODE_INFRA)));
- IW_SET_EXT_ERR(skfd, ifname, SIOCSIWMODE, &wrq, "Set Mode");
-}
-
-void setup_wext(int skfd, char *ifname)
-{
- char *buffer;
- struct iwreq wrq;
-
- /* Set channel */
- int channel = atoi(nvram_safe_get(wl_var("channel")));
-
- wrq.u.freq.m = -1;
- wrq.u.freq.e = 0;
- wrq.u.freq.flags = 0;
-
- if (channel > 0) {
- wrq.u.freq.flags = IW_FREQ_FIXED;
- wrq.u.freq.m = channel;
- IW_SET_EXT_ERR(skfd, ifname, SIOCSIWFREQ, &wrq, "Set Frequency");
- }
-
-
- /* Disable radio if wlX_radio is set and not enabled */
- wrq.u.txpower.disabled = nvram_disabled(wl_var("radio"));
-
- wrq.u.txpower.value = -1;
- wrq.u.txpower.fixed = 1;
- wrq.u.txpower.flags = IW_TXPOW_DBM;
- IW_SET_EXT_ERR(skfd, ifname, SIOCSIWTXPOW, &wrq, "Set Tx Power");
-
- /* Set up WEP */
- if (nvram_enabled(wl_var("wep")))
- setup_wext_wep(skfd, ifname);
-
- /* Set ESSID */
- set_wext_ssid(skfd, ifname);
-
-}
-
-
-static int setup_interfaces(int skfd, char *ifname, char *args[], int count)
-{
- struct iwreq wrq;
- int rc;
-
- /* Avoid "Unused parameter" warning */
- args = args; count = count;
-
- if(iw_get_ext(skfd, ifname, SIOCGIWNAME, &wrq) < 0)
- return 0;
-
- stop_bcom(skfd, ifname);
- set_wext_mode(skfd, ifname);
- setup_bcom(skfd, ifname);
- setup_wext(skfd, ifname);
-
- prefix[2]++;
-}
-
-int main(int argc, char **argv)
-{
- int skfd;
- if((skfd = iw_sockets_open()) < 0) {
- perror("socket");
- exit(-1);
- }
-
- prefix = strdup("wl0_");
- iw_enum_devices(skfd, &setup_interfaces, NULL, 0);
-
- return 0;
-}
projects / openwrt.git / commitdiff