ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes...

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18699 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wrt160nl/network b/target/linux/ar71xx/base-files/etc/defconfig/wrt160nl/network
index 24fca72..974119b 100644 (file)
--- a/target/linux/ar71xx/base-files/etc/defconfig/wrt160nl/network
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wrt160nl/network
@@ -15,7 +15,7 @@ config interface wan
        option ifname   eth1
        option proto    dhcp
 
-config switch eth1
+config switch eth0
        option reset    1
        option enable_vlan 1
 

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c
index 0a73be1..9f5f6f1 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c
@@ -124,7 +124,7 @@ static void __init wrt160nl_setup(void)
        ar71xx_add_device_mdio(0x0);
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.phy_mask = 0xf;
+       ar71xx_eth0_data.phy_mask = 0x01;
        ar71xx_eth0_data.speed = SPEED_100;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
 

diff --git a/target/linux/generic-2.6/files/drivers/net/phy/rtl8306.c b/target/linux/generic-2.6/files/drivers/net/phy/rtl8306.c
index 259ff50..5c8e81f 100644 (file)
--- a/target/linux/generic-2.6/files/drivers/net/phy/rtl8306.c
+++ b/target/linux/generic-2.6/files/drivers/net/phy/rtl8306.c
@@ -913,6 +913,9 @@ rtl8306_fixup(struct phy_device *pdev)
        struct rtl_priv priv;
        u16 chipid;
 
+       if (pdev->addr != 0)
+               return 0;
+
        priv.page = -1;
        priv.bus = pdev->bus;
        chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);