Add back Sitecom WL-105b support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10142 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 60bf612..e672982 100644 (file)
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -115,6 +115,9 @@ enum {
        DIR130,
        DIR330,
        DWL3150,
+
+       /* Sitecom */
+       WL105B,
 };
 
 static void __init bcm4780_init(void) {
@@ -618,6 +621,17 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "status",     .gpio = 1 << 1},
                },
        },
+       /* Double check */
+       [WL105B] = {
+               .name   = "Sitecom WL-105b",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 10},
+               },
+               .leds     = {
+                       { .name = "wlan",       .gpio = 1 << 4},
+                       { .name = "power",      .gpio = 1 << 3},
+               },
+       },
 };
 
 static struct platform_t __init *platform_detect(void)
@@ -730,6 +744,9 @@ static struct platform_t __init *platform_detect(void)
                                (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 10))
                                return &platforms[WL300G];
                }
+               /* Sitecom WL-105b */
+               if (!strncmp(boardnum, "2", 1) && simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 1)
+                       return &platforms[WL105B];
 
                /* unknown asus stuff, probably bcm4702 */
                if (!strncmp(boardnum, "asusX", 5))

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 643ba35..b207bd4 100755 (executable)
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -105,6 +105,13 @@ start() {
                        c["wan_ifname"]=""
                }
 
+               # Sitecom WL-105b
+               if ((nvram["boardum"] == "2") && \
+                       (nvram["GemtekPmonVer"] == "1")) {
+                       c["lan_ifname"]="eth0"
+                       c["wan_ifname"]=""
+               }
+
                # ASUS WL-700gE
                # These are actually same as defaults above. For some reason this script applies
                # Generic BCM94704 settings instead so we revert to proper settings here.

diff --git a/target/linux/brcm-2.4/base-files/etc/preinit.arch b/target/linux/brcm-2.4/base-files/etc/preinit.arch
index 43df591..5127e60 100755 (executable)
--- a/target/linux/brcm-2.4/base-files/etc/preinit.arch
+++ b/target/linux/brcm-2.4/base-files/etc/preinit.arch
@@ -34,6 +34,7 @@ case "$(cat /proc/diag/model)" in
        "ASUS WL-HDD") ifname=eth1;;
        "ASUS WL-300g") ifname=eth1;;
        "ASUS (unknown, BCM4702)") ifname=eth1;;
+       "Sitecom WL-105b") ifname=eth1;;
 esac
 
 failsafe_ip