[ar71xx] setup speed/duplex on RB-433/450 (closes #4151)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13087 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb-4xx.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb-4xx.c
index 8e63aca..d704d7d 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb-4xx.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb-4xx.c
@@ -183,6 +183,8 @@ static void __init rb433_setup(void)
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
        ar71xx_eth0_data.phy_mask = 0x00000003;
+       ar71xx_eth0_data.speed = SPEED_100;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
 
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
        ar71xx_eth1_data.phy_mask = 0x00000010;
@@ -212,6 +214,8 @@ static void __init rb450_setup(void)
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
        ar71xx_eth0_data.phy_mask = 0x0000000f;
+       ar71xx_eth0_data.speed = SPEED_100;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
 
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
        ar71xx_eth1_data.phy_mask = 0x00000010;

diff --git a/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h b/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h
index 2f60d19..5cd7dc2 100644 (file)
--- a/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h
+++ b/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx.h
@@ -37,7 +37,7 @@
 #define ETH_FCS_LEN    4
 
 #define AG71XX_DRV_NAME                "ag71xx"
-#define AG71XX_DRV_VERSION     "0.4.2"
+#define AG71XX_DRV_VERSION     "0.4.3"
 
 #define AG71XX_NAPI_TX         1
 

diff --git a/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx_phy.c b/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx_phy.c
index 512b42e..e44bea4 100644 (file)
--- a/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx_phy.c
+++ b/target/linux/ar71xx/files/drivers/net/ag71xx/ag71xx_phy.c
@@ -276,6 +276,17 @@ int ag71xx_phy_connect(struct ag71xx *ag)
                break;
 
        default:
+               switch (pdata->speed) {
+               case SPEED_10:
+               case SPEED_100:
+               case SPEED_1000:
+                       break;
+               default:
+                       printk(KERN_ERR "%s: invalid speed specified\n",
+                               dev->name);
+                       return -EINVAL;
+               }
+
                ag->phy_dev = NULL;
                printk(KERN_DEBUG "%s: connected to %d PHYs\n",
                        dev->name, phy_count);