-diff -urN linux.old/drivers/atm/Config.in linux.dev/drivers/atm/Config.in
---- linux.old/drivers/atm/Config.in 2005-08-22 23:18:37.773532032 +0200
-+++ linux.dev/drivers/atm/Config.in 2005-08-23 04:46:50.076846888 +0200
-@@ -99,4 +99,10 @@
- bool 'Use S/UNI PHY driver' CONFIG_ATM_HE_USE_SUNI
- fi
- fi
-+#
-+# Texas Instruments SANGAM ADSL/ATM support
-+#
-+if [ "$CONFIG_AR7" = "y" ]; then
-+ tristate 'Texas Instruments SANGAM ATM/ADSL support' CONFIG_MIPS_SANGAM_ATM
-+fi
- endmenu
-diff -urN linux.old/drivers/atm/Makefile linux.dev/drivers/atm/Makefile
---- linux.old/drivers/atm/Makefile 2005-08-22 23:18:37.773532032 +0200
-+++ linux.dev/drivers/atm/Makefile 2005-08-23 04:46:50.077846736 +0200
-@@ -14,6 +14,32 @@
- obj-$(CONFIG_ATM_NICSTAR) += nicstar.o
- obj-$(CONFIG_ATM_IDT77252) += idt77252.o
-
-+ifeq ($(CONFIG_AR7),y)
-+
-+subdir-$(CONFIG_MIPS_SANGAM_ATM) += sangam_atm
-+
-+EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP -DCONFIG_LED_MODULE -DDEREGISTER_LED -DNO_ACT
-+#EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP
-+
-+ifeq ($(ANNEX),B)
-+EXTRA_CFLAGS += -DANNEX_B -DB
-+else
-+ifeq ($(ANNEX),C)
-+EXTRA_CFLAGS += -DANNEX_C -DC
-+else
-+EXTRA_CFLAGS += -DANNEX_A -DP
-+endif
-+endif
-+
-+list-multi := tiatm.o
-+tiatm-objs := sangam_atm/tn7atm.o sangam_atm/tn7dsl.o sangam_atm/tn7sar.o \
-+ sangam_atm/dsl_hal_api.o sangam_atm/dsl_hal_support.o sangam_atm/cpsar.o \
-+ sangam_atm/aal5sar.o
-+
-+obj-$(CONFIG_MIPS_SANGAM_ATM) += sangam_atm/tiatm.o
-+
-+endif
-+
- ifeq ($(CONFIG_ATM_NICSTAR_USE_SUNI),y)
- obj-$(CONFIG_ATM_NICSTAR) += suni.o
- endif
-diff -urN linux.old/drivers/atm/sangam_atm/aal5sar.c linux.dev/drivers/atm/sangam_atm/aal5sar.c
---- linux.old/drivers/atm/sangam_atm/aal5sar.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/aal5sar.c 2005-08-23 04:46:50.080846280 +0200
-@@ -0,0 +1,2962 @@
-+
-+/**
-+ *
-+ * aal5sar.c
-+ *
-+ * TNETDxxxx Software Support\n
-+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ * version
-+ * 28Feb02 Greg 1.00 Original Version created.\n
-+ * 06Mar02 Greg 1.01 Documentation (Doxygen-style) enhanced
-+ * 06May02 Greg 1.02 AAL2 added
-+ * 06Jun02 Greg 1.03 Multiple API and bug fixes from emulation
-+ * 12Jul02 Greg 1.04 API Update
-+ */
-+
-+/**
-+@defgroup CPHAL_Functions CPHAL Functions
-+
-+These are the CPHAL Functions.
-+*/
-+
-+/**
-+@page CPHAL_Implementation_Details
-+
-+@section cphal_intro Introduction
-+
-+The CPHAL API described above is generally applicable to all modules. Any
-+implementation differences will be described in the following module-specific
-+appendix sections.
-+
-+Included for your reference is a diagram showing the internal architecture
-+of the CPHAL:
-+
-+@image html SangamSoftware.jpg "HAL Architecture"
-+@image latex SangamSoftware.jpg "HAL Architecture" height=2.8in
-+
-+*/
-+
-+/**
-+@defgroup AAL5_Functions Additional Functions for AAL5 Implementation
-+
-+These functions are used only by the AAL5 module.
-+*/
-+
-+/*
-+@defgroup CPMAC_Functions Additional Functions for CPMAC Implementation
-+
-+No additional functions currently defined.
-+*/
-+
-+/**
-+@page VDMA_Implementation_Details
-+
-+@section vdma_intro Introduction
-+
-+The VDMA-VT module facilitates efficient transfer of data (especially voice)
-+between two devices, as shown in the figure below.
-+
-+@image html vdma.jpg "VDMA System Block Diagram"
-+@image latex vdma.jpg "VDMA System Block Diagram" height=1in
-+
-+The VDMA-VT module supports two modes of operation: mirror mode and credit mode.
-+Mirror mode is intended for systems in which the remote device does not have a
-+VDMA-based module. Credit mode is intended for highest performance when VDMA-based
-+modules exist on both ends of an interface.
-+
-+For more detailed information on the operation of the VDMA module, please
-+reference the VDMA Module Guide.
-+
-+@section vdma_channels VDMA Channels
-+
-+The VDMA-VT module is a single channel, single transmit queue device. Therefore,
-+when using the CHANNEL_INFO structure, the correct value for @c Ch is always 0.
-+Correspondingly, the correct value for the @c Ch parameter in @c ChannelTeardown() is
-+always 0. Further, when calling @c Send(), the driver should always supply the value
-+of 0 for both the @c Ch and @c Queue parameters.
-+
-+For the VDMA-VT, configuring the channel requires the configuration of either 2 FIFO
-+elements (in credit mode) or 4 FIFO elements (in mirror mode). For credit mode, the
-+driver must configure just the local Tx and Rx FIFOs. For mirror mode, the driver must
-+configure the Tx and Rx FIFOs for both the remote and local ends of the interface.
-+
-+This channel configuration is accomplished through multiple calls to @c ChannelSetup().
-+Each call configures a single FIFO, according to the parameters in the CHANNEL_INFO
-+structure. The members of VDMA-VT's CHANNEL_INFO structure are defined below.
-+
-+
-+- int RemFifoAddr; Address of remote FIFO (mirror mode only). Set to 0 for credit mode.
-+- int FifoAddr; Address of the local FIFO. If 0, the CPHAL will allocate the FIFO.
-+- int FifoSize; Size of the FIFO.
-+- int PollInt; Polling interval for the FIFO.
-+- int Endianness; Endianness of the FIFO. If 1, big endian. If 0, little endian.
-+- int RemAddr; Used only in credit mode. This is the base address of the remote
-+ remote VDMA-based device (VDMA-VT or AAL2)
-+- int RemDevID; Used only in credit mode. Identifies the type of remote VDMA-based device.
-+ 0=VDMAVT, 1=AAL2 Ch0, 2=AAL2 Ch1, 3=AAL2 Ch2, 4= AAL2 Ch3.
-+
-+For the VDMA-VT module, the driver must make all calls to @c ChannelSetup() prior to calling
-+@c Open(). This is because several of the channel specific parameters may not be changed
-+while the VDMA-VT module is operational.
-+
-+@section vdma_params VDMA Parameters
-+
-+Defined here are the set of parameters for the VDMA-VT module. Default settings for
-+each parameter should be represented in the device configuration file (options.conf).
-+During @c Init(), the CPHAL will reference the device configuration file and load all
-+default settings. The @c Control() interface gives the driver an opportunity to
-+modify any default settings before the module becomes operational during the @c Open()
-+call.
-+
-+@param NoTxIndication If 1, the CPHAL will not call @c SendComplete(). 0 is default.
-+@param NoRxIndication If 1, the CPHAL will not call @c Receive(). 0 is default.
-+@param RemoteCPU If 1, the CPHAL will not directly manipulate data in FIFO's, leaving
-+ that task for a remote CPU. 0 is default.
-+@param RxIntEn If 1, enables Rx interrupts. 0 is default.
-+@param TxIntEn If 1, enables Tx interrupts. 0 is default.
-+@param Mirror If 1, enables mirror mode. 0 selects credit mode (default).
-+@param RxIntCtl Valid only in mirror mode. If 1, interrupts will occur when the Rx FIFO
-+ RdIndex is updated. If 0, interrupts occur when the Rx FIFO WrIndex
-+ is updated.
-+@param TxIntCtl Valid only in mirror mode. If 1, interrupts will occur when the Rx FIFO
-+ RdIndex is updated. If 0, interrupts occur when the Rx FIFO WrIndex
-+ is updated.
-+@param RBigEn Remote big endian mode. If 1, remote is big endian.
-+@param LBigEn Local big endian mode. If 1, local is big endian.
-+
-+@section vdma_polling Using VDMA-VT without interrupts
-+
-+If your system configuration does not utilize VDMA interrupts, the ability to process the
-+Tx and Rx FIFOs is supported. To process the Tx FIFO, call @c CheckTx(). If the CPHAL is
-+able to process any complete data transmissions, it will call @c SendComplete() as usual.
-+To process the Rx FIFO, call @c CheckRx(). If the CPHAL has received any data, it will
-+call @c Receive() to pass the driver the data. Please reference @ref VDMA_Functions for more
-+information on these interfaces.
-+
-+@section vdma_details VDMA Implementation Details
-+
-+The following functions are not defined for use with VDMA: @c Status(), @c Tick(), @c StatsGet(),
-+and @c StatsClear().
-+
-+*/
-+
-+/**
-+@page AAL5_Implementation_Details
-+
-+@section aal5_ver Version
-+
-+@copydoc AAL5_Version
-+
-+@section aal5_intro Introduction
-+
-+The AAL5 implementation will support 16 channels for transmit and 16 channels for
-+receive. Each of the transmit channels may have up to two transmit queues
-+associated with it. If two queues are used, Queue 0 is the high priority queue,
-+and Queue 1 is the low priority queue.
-+
-+@section aal5_params AAL5 Configuration Parameters
-+
-+AAL5 requires two device entries to be available in the configuration repository, named
-+@p "aal5" and @p "sar". The @p aal5 device entry must contain @p base (base address)
-+and @p int_line (interrupt number). The @p sar device entry must have both @p base
-+(base address) and @p reset_bit (reset bit).
-+
-+@par Device Level Configuration Parameters
-+
-+The following parameters are device-level parameters, which apply across all
-+channels. The value for these parameters may be modified by changing the value in the
-+configuration repository.
-+
-+- "UniNni":
-+AAL5 network setting. 0 = UNI (default), 1 = NNI.
-+
-+@par Channel Configuration Parameters
-+
-+All AAL5 channel parameters may also be configured through the @c ChannelSetup() interface.
-+Following is the list of @p CHANNEL_INFO members that may be modified by the driver when
-+calling @c ChannelSetup(). The driver may provide a value of 0xFFFFFFFF for any channel
-+parameter to select a default value for the parameter. The driver should at a minimum
-+configure @p Vci and @p Vpi. The usage of all parameters beginning with TxVc_,
-+TxVp_, RxVc_, RxVp_ is described in greater detail in the SAR Firmware Spec.
-+These parameters are mainly associated with QoS and OAM functionality.
-+
-+- "RxNumBuffers":
-+The number of Rx buffer descriptors to allocate for Ch.
-+- "RxBufSize":
-+Size (in bytes) for each Rx buffer.
-+- "RxBufferOffset":
-+Number of bytes to offset rx data from start of buffer (must be less than buffer size).
-+- "RxServiceMax":
-+Maximum number of packets to service at one time.
-+- "TxNumBuffers":
-+The number of Tx buffer descriptors to allocate for Ch.
-+- "TxNumQueues":
-+Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue.
-+- "TxServiceMax":
-+Maximum number of packets to service at one time.
-+- "CpcsUU":
-+The 2-byte CPCS UU and CPI information.
-+- "Gfc":
-+Generic Flow Control. Used in ATM header of Tx packets.
-+- "Clp":
-+Cell Loss Priority. Used in ATM header of Tx packets.
-+- "Pti":
-+Payload Type Indication. Used in ATM header of Tx packets.
-+- "DaMask":
-+Specifies whether credit issuance is paused when Tx data not available.
-+- "Priority":
-+Priority bin this channel will be scheduled within.
-+- "PktType":
-+0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2.
-+- "Vci":
-+Virtual Channel Identifier.
-+- "Vpi":
-+Virtual Path Identifier.
-+- "TxVc_AtmHeader":
-+In firmware OAM mode, this
-+is the ATM header to be appended to front of firmware generated VC OAM cells for
-+this channel. Note: To generate host OAM cells, call @c Send() with
-+the appropriate mode.
-+- "TxVc_CellRate":
-+Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR).
-+- "TxVc_QosType":
-+0=CBR,1=VBR,2=UBR,3=UBRmcr.
-+- "TxVc_Mbs":
-+Min Burst Size in cells.
-+- "TxVc_Pcr":
-+Peak Cell Rate for VBR in clock ticks between transmissions.
-+- "TxVc_OamTc":
-+TC Path to transmit OAM cells for TX connections (0,1).
-+- "TxVc_VpOffset":
-+Offset to the OAM VP state table for TX connections. Channels with the same
-+VPI must have the same VpOffset value. Channels with different VPIs
-+must have unique VpOffset values.
-+- "RxVc_OamCh":
-+Channel to which to terminate received OAM cells to be forwarded to the Host
-+for either Host OAM mode, or when RxVc_OamToHost is enabled during Firmware
-+OAM mode.
-+- "RxVc_OamToHost":
-+Indicates whether to pass received unmatched OAM loopback cells to the host;
-+0=do not pass, 1=pass.
-+- "RxVc_AtmHeader":
-+ATM Header placed on firmware gen'd OAM cells for this channel on a Rx
-+connection (must be big endian with 0 PTI).
-+- "RxVc_OamTc":
-+TC Path to transmit OAM cells for RX connections (0,1).
-+- "RxVc_VpOffset":
-+Offset to the OAM VP state table for RX connections. Channels with the same
-+VPI must have the same VpOffset value. Channels with different VPIs
-+must have unique VpOffset values.
-+- "TxVp_OamTc":
-+TC Path to transmit OAM cells for TX VP connections (0,1).
-+- "TxVp_AtmHeader":
-+ATM Header placed on firmware gen'd VP OAM cells for this channel on a Tx VP
-+connection (must be big endian with 0 VCI).
-+- "RxVp_OamCh":
-+Channel to which to terminate received OAM cells to be forwarded to the Host
-+for either Host OAM mode, or when RxVc_OamToHost is enabled during Firmware
-+OAM mode.
-+- "RxVp_OamToHost":
-+Indicates whether to pass received unmatched OAM loopback cells to the host;
-+0=do not pass, 1=pass.
-+- "RxVp_AtmHeader":
-+In firmware OAM mode, this
-+is the ATM header to be appended to front of firmware generated VP OAM cells for
-+this channel. Note: To generate host OAM cells, call @c Send() with
-+the appropriate mode.
-+- "RxVp_OamTc":
-+TC Path to transmit OAM cells for RX VP connections (0,1).
-+- "RxVp_OamVcList":
-+This 32-bit field is one-hot encoded to indicate all the VC channels that are
-+associated with this VP channel. A value of 21 will indicate that VC
-+channels 0, 2, and 4 are associated with this VP channel.
-+- "FwdUnkVc":
-+Indicates whether or not to forward unknown VCI/VPI cells to the host. This
-+parameter only takes effect if the channel's PktType is Transparent(3).
-+1=forwarding enabled, 0=forwarding disabled.
-+
-+@section aal5_details API Implementation Details
-+
-+ATTENTION: Documentation given here supplements the documentation given in the general
-+CPHAL API section. The following details are crucial to correct usage of the
-+AAL5 CPHAL.
-+
-+@par Receive()
-+The least significant byte of @p Mode contains the channel number. Bit 31
-+indicates whether or not the ATM header is present in the first fragment of
-+the packet. If bit 31 is set, the 4 byte ATM header (minus HEC) will be provided
-+in the first fragment, with the payload beginning in the second fragment. Currently,
-+this is the default behavior for host OAM and transparent mode packets.
-+Bits 17-16 indicate the packet type that is being received.
-+Mode Parameter Breakdown: <BR>
-+- 31 ATM Header In First Fragment (1=true, 0=false) <BR>
-+- 30-18 Unused. <BR>
-+- 17-16 Pkt Type. <BR>
-+ - 0=AAL5 <BR>
-+ - 1=PTI Based Null AAL <BR>
-+ - 2=OAM <BR>
-+ - 3=Transparent <BR>
-+- 15-08 Unused. <BR>
-+- 07-00 Channel Number.
-+
-+@par Send()
-+The most significant 16 bits of the first fragment 'len' is used as the Offset
-+to be added to the packet. @c Send() will reserve this many bytes at the
-+beginning of the transmit buffer prior to the first byte of valid data.
-+For the @p Mode parameter, Bit 31 must be set if the user has sent a packet with
-+the ATM Header (minus HEC) embedded in the first 4 bytes of the first fragment data buffer.
-+The OS has the option of using a 4 byte first fragment containing only ATM header,
-+or concatenating the ATM Header in front of the data payload.
-+If Bit 31 is set, the ATM Header in the buffer is preserved and sent with
-+each cell of the packet. Otherwise, Send() will build the ATM header based on the
-+values of the Pti, Gfc, Clp, Vpi, and Vci parameters for the given channel.
-+Bits 17-16 are defined as the packet type. Bits 15-08 may be used to specify the
-+transmit queue to send the packet on. Only values 0 (high priority) and 1 (low
-+priority) are accepted. Bits 07-00 should be used to indicate the channel number
-+for the @c Send() operation. Valid channel numbers are 0-15.
-+Mode Parameter Breakdown: <BR>
-+- 31 ATM Header In Packet (1=true, 0=false) <BR>
-+- 30-18 Unused. <BR>
-+- 17-16 Pkt Type. <BR>
-+ - 0=AAL5 <BR>
-+ - 1=PTI Based Null AAL <BR>
-+ - 2=OAM <BR>
-+ - 3=Transparent <BR>
-+- 15-08 Transmit Queue. <BR>
-+- 07-00 Channel Number.
-+
-+@par ChannelSetup()
-+The AAL5 @c ChannelSetup() always configures both the Tx and Rx side of the channel
-+connection in the same call.
-+
-+@par ChannelTeardown()
-+Regardless of the channel teardown direction selected, the AAL5 CPHAL will always
-+teardown both the Tx and Rx side of the channel connection.
-+
-+@par TeardownComplete()
-+The value for the @p Direction parameter should be ignored for the AAL5 implementation,
-+since both directions (Tx and Rx) are always torndown in response to a @c ChannelTeardown()
-+command.
-+
-+@par Control() (HAL version)
-+Defined keys and actions. Unless otherwise stated, the data type
-+for Value is pointer to unsigned integer. The list is broken into
-+three groups, one group which can be used anytime, one group that should
-+be used before halOpen(), and one group which can only be used after
-+halOpen() (but before halClose()). For channelized parameters, replace
-+'Ch' with the integer number of a channel (ex. "Gfc.4" can be used to set
-+Gfc for channel 4).
-+
-+MAY USE ANYTIME AFTER INIT (after halInit() is called):
-+
-+- "Gfc.Ch". The OS may "Set" this value. Changing this value causes
-+the Gfc in each Tx ATM header for this channel to take on the new Gfc value.
-+
-+- "Clp.Ch". The OS may "Set" this value. Changing this value causes
-+the Clp in each Tx ATM header for this channel to take on the new Clp value.
-+
-+- "Pti.Ch". The OS may "Set" this value. Changing this value causes
-+the Pti in each Tx ATM header for this channel to take on the new Pti value.
-+
-+- "CpcsUU.Ch". The OS may "Set" this value. Changing this value causes
-+the CpcsUU in each Tx ATM header for this channel to take on the new CpcsUU value.
-+
-+- "OamMode". Specifies if host or firmware is performing OAM functions; 0 = Host OAM,
-+1 = Firmware OAM. When set, all SAR channels will be configured for
-+the selection, including AAL2 channels.
-+
-+- "OamLbTimeout". Specifies the firmware OAM loopback timeout, in milliseconds.
-+
-+- "DeviceCPID". The OS may "Set" this value. This is the OAM connection
-+point identifier. The OS should provide a pointer to an array of 4 32-bit
-+integers. Each word must be configured in big endian format.
-+
-+- "FwdUnkVc.Ch". Indicates whether or not to forward unknown VCI/VPI cells to the host.
-+This parameter only takes effect if the channel's PktType is Transparent(3).
-+1=forwarding enabled, 0=forwarding disabled.
-+
-+MAY USE ONLY BEFORE HAL IS OPEN (before halOpen() call):
-+- "StrictPriority". The OS may "Set" this value. Setting to 1 causes
-+a different interrupt processing routine to be used, which gives strict
-+priority to channels with lower numbers (channel 0 has highest priority).
-+The default handler gives equal priority to all channels.
-+
-+- "MaxFrags". The OS may "Set" or "Get" this value. This defines the maximum
-+number of fragments that can be received by the AAL5 Rx port. The default
-+value for AAL5 is 46. This provides enough space to receive a maximum
-+length AAL5 packet (65,568 bytes) with the default buffer size of 1518 bytes, and
-+any amount of RxBufferOffset. If the buffer size is configured to be smaller,
-+the OS *MUST* modify this parameter according to the following formula:
-+((System Max AAL5 packet length)/(RxBufSize)) + 2. (The extra two fragments in
-+the formula allow for RxBufferOffset and one fragment for the ATM Header, used
-+when receiving host OAM or transparent mode packets)
-+
-+MAY USE ONLY AFTER HAL IS 'OPEN' (after halOpen() call):
-+- "Stats;Level;Ch;Queue". The OS may "Get" Stats groups with this key, where
-+'Level' is an integer from 0-4, Ch is an integer from 0-15, and Queue is
-+an integer from 0-1. Note that Ch is not required for Level 4 stats, and Queue
-+is not required for Level 0, 3, and 4. The statistics functionality and return
-+value is described in the appendix entitled "Configuration and Control".
-+
-+- "TxVc_CellRate.Ch". The OS may "Set" this value. Can be used to modify
-+CellRate for a channel on the fly.
-+
-+- "TxVc_Mbs.Ch". The OS may "Set" this value. Can be used to modify
-+Mbs for a channel on the fly.
-+
-+- "TxVc_Pcr.Ch". The OS may "Set" this value. Can be used to modify
-+Pcr for a channel on the fly.
-+
-+- "PdspEnable". The OS may "Set" this value. Value 0 disables the PDSP.
-+Value 1 enables to PDSP.
-+
-+- "DeviceCPID". The OS may "Set" this value. The Value should be an array
-+of 4 32-bit integers that comprise the CPID.
-+
-+- "RxVc_RDICount.Ch". The OS may "Get" or "Set" this value. Get returns
-+the current RDI count for the VC channel. Set clears the counter, and the Value
-+is ignored.
-+
-+- "RxVp_RDICount.Ch". The OS may "Get" or "Set" this value. Get returns
-+the current RDI count for the VP channel. Set clears the counter, and the Value
-+is ignored.
-+
-+- "RxVc_AISseg.Ch". The OS may "Get" this value. This is an indication of
-+AIS segment error for the VC channel.
-+
-+- "RxVp_AISseg.Ch". The OS may "Get" this value. This is an indication of
-+AIS segment error for the VP channel.
-+
-+- "RxVc_AISetoe.Ch". The OS may "Get" this value. This is an indication of
-+AIS end-to-end error for the VC channel.
-+
-+- "RxVp_AISetoe.Ch". The OS may "Get" this value. This is an indication of
-+AIS end-to-end error for the VP channel.
-+
-+- "RxVc_OamCh.Ch". The OS may "Set" this value. Channel to which to terminate
-+received OAM cells to be forwarded to the Host for either Host OAM mode, or when
-+RxVc_OamToHost is enabled during Firmware OAM mode.
-+
-+- "RxVp_OamCh.Ch". The OS may "Set" this value. Channel to which to terminate
-+received OAM cells to be forwarded to the Host for either Host OAM mode, or when
-+RxVp_OamToHost is enabled during Firmware OAM mode.
-+
-+- "F4_LB_Counter". The OS may "Get" this value. This is a count of the number
-+ of near-end F4 loopbacks performed by the PDSP in firmware OAM mode.
-+
-+- "F5_LB_Counter". The OS may "Get" this value. This is a count of the number
-+ of near-end F5 loopbacks performed by the PDSP in firmware OAM mode.
-+
-+- "TxVc_AtmHeader.Ch". The OS may "Set" this value. In firmware OAM mode, this
-+is the ATM header to be appended to front of firmware generated VC OAM cells for
-+this channel. In host OAM mode, this is used as the ATM header to be appended
-+to front of host generated VC OAM cells for this channel. It must be configured
-+as big endian with PTI=0. Note: To generate host OAM cells, call @c Send() with
-+the appropriate mode.
-+
-+- "TxVp_AtmHeader.Ch". The OS may "Set" this value. In firmware OAM mode, this
-+is the ATM header to be appended to front of firmware generated VP OAM cells for
-+this channel. In host OAM mode, this is used as the ATM header to be appended
-+to front of host generated VP OAM cells for this channel. It must be configured
-+as big endian with VCI=0. Note: To generate host OAM cells, call @c Send() with
-+the appropriate mode.
-+
-+- "PdspEnable". The OS may "Set" this value. Controls whether or not the PDSP is
-+allowed to fetch new instructions. The PDSP is enabled by the CPHAL during Open(),
-+and disabled during Close(). 0 = disabled, 1 = enabled.
-+
-+@par Control() (OS version)
-+Defined keys and actions:
-+
-+- "Firmware". The CPHAL will perform a "Get" action for the key "Firmware". A pointer
-+to a pointer is passed in @p Value. The OS must modify the referenced pointer to point
-+to the firmware.
-+
-+- "FirmwareSize". The CPHAL will perform a "Get" action for the key "FirmwareSize".
-+The OS must place the firmware size in the memory pointed at by @p Value.
-+
-+- "OamLbResult". When a channel that is in firmware OAM mode is commanded to perform
-+a loopback function, the result of the loopback generates an interrupt that is handled
-+by the OS like any other interrupt. The CPHAL, upon servicing the interrupt, will call
-+osControl with this key, and an action of "Set". The @p Value parameter will be a
-+pointer to the integer result. 1 = pass, 0 = fail.
-+
-+- "SarFreq". The CPHAL will perform a "Get" action for this key. The OS should place
-+the SAR frequency (in Hz) in the memory pointed at by @p Value.
-+
-+@section aal5_stats AAL5 Specific Statistics
-+
-+Statistics level '0' contains all AAL5 specific statistics. The following values will
-+be obtained when requesting stats level 0:
-+
-+- "Crc Errors". Number of CRC errors reported by SAR hardware. Incremented for received
-+packets that contain CRC errors.
-+
-+- "Len Errors". Number of length errors reported by SAR hardware. Incremented for received
-+packets that are in excess of 1366 cells.
-+
-+- "Abort Errors". Number of abort errors reported by SAR hardware.
-+
-+- "Starv Errors". Number of buffer starvation errors reported by SAR hardware. Incremented
-+when a part or all of a buffer cannot be received due to lack of RX buffer resources. The SAR
-+drops all cells associated with the packet for each buffer starvation error that occurs.
-+
-+*/
-+
-+/* register files */
-+#include "cp_sar_reg.h"
-+
-+#define _CPHAL_AAL5
-+#define _CPHAL
-+#define _CPPI_TEST /** @todo remove for release */
-+#define __CPHAL_CPPI_OFFSET /* support use of offset */
-+
-+/* OS Data Structure definitions */
-+
-+typedef void OS_PRIVATE;
-+typedef void OS_DEVICE;
-+typedef void OS_SENDINFO;
-+typedef void OS_RECEIVEINFO;
-+typedef void OS_SETUP;
-+
-+/* CPHAL Data Structure definitions */
-+
-+typedef struct hal_device HAL_DEVICE;
-+typedef struct hal_private HAL_PRIVATE;
-+typedef struct hal_private HAL_RECEIVEINFO;
-+
-+/* include CPHAL header files here */
-+#include "cpcommon_cpaal5.h"
-+#include "cpswhal_cpaal5.h"
-+#include "aal5sar.h"
-+#include "cpcommon_cpaal5.c"
-+
-+#define CR_SERVICE (170-1)
-+#define UTOPIA_PAUSE_REG (*(volatile bit32u *)0xa4000000)
-+
-+/*
-+these masks are for the mode parameter used in halSend/OsReceive
-+(may move these elsewhere)
-+*/
-+#define CH_MASK 0xff
-+#define PRI_MASK 0x10000
-+
-+/* Rcb/Tcb Constants */
-+#define CB_SOF_BIT (1<<31)
-+#define CB_EOF_BIT (1<<30)
-+#define CB_SOF_AND_EOF_BIT (CB_SOF_BIT|CB_EOF_BIT)
-+#define CB_OWNERSHIP_BIT (1<<29)
-+#define CB_EOQ_BIT (1<<28)
-+#define CB_SIZE_MASK 0x0000ffff
-+#define CB_OFFSET_MASK 0xffff0000
-+#define RCB_ERRORS_MASK 0x03fe0000
-+#define RX_ERROR_MASK 0x000f0000
-+#define CRC_ERROR_MASK 0x00010000
-+#define LENGTH_ERROR_MASK 0x00020000
-+#define ABORT_ERROR_MASK 0x00040000
-+#define STARV_ERROR_MASK 0x00080000
-+#define TEARDOWN_VAL 0xfffffffc
-+
-+/* interrupt vector masks */
-+#define TXH_PEND 0x01000000
-+#define TXL_PEND 0x02000000
-+#define RX_PEND 0x04000000
-+#define STS_PEND 0x08000000
-+#define AAL2_PEND 0x10000000
-+#define INT_PENDING (TXH_PEND | TXL_PEND | RX_PEND | STS_PEND | AAL2_PEND)
-+#define STS_PEND_INVEC 0x0001F000
-+#define RX_PEND_INVEC 0x00000F00
-+#define TXL_PEND_INVEC 0x000000F0
-+#define TXH_PEND_INVEC 0x0000000F
-+#define AIS_SEG_MASK 0x1 /* +01.02.00 */
-+#define AIS_SEG_SHIFT 0 /* +01.02.00 */
-+#define AIS_ETOE_MASK 0x20000 /* +01.02.00 */
-+#define AIS_ETOE_SHIFT 17 /* +01.02.00 */
-+#define RDI_CNT_MASK 0xffff0000 /* +01.02.00 */
-+#define RDI_CNT_SHIFT 16 /* +01.02.00 */
-+
-+/*
-+ * This function takes a vpi/vci pair and computes the 4 byte atm header
-+ * (minus the HEC).
-+ *
-+ * @param vpi Virtual Path Identifier.
-+ * @param vci Virtual Channel Identifier.
-+ *
-+ * @return A properly formatted ATM header, without the HEC.
-+ */
-+static int atmheader(int gfc, int vpi, int vci, int pti, int clp)
-+ {
-+ int itmp;
-+
-+ itmp=0;
-+
-+ /* UNI Mode uses the GFC field */
-+ itmp |= ((gfc & 0xF) << 28);
-+ itmp |= ((vpi & 0xFF) << 20);
-+
-+ /* if NNI Mode, no gfc and larger VPI */
-+ /*itmp |= ((vpi & 0xFFF) << 20);*/
-+
-+ itmp|=((vci & 0xFFFF) << 4);
-+ itmp|=((pti & 0x7) << 1);
-+ itmp|=(clp & 0x1);
-+ return(itmp);
-+ }
-+
-+#include "cppi_cpaal5.c"
-+
-+/*
-+ * Re-entrancy Issues
-+ * In order to ensure successful re-entrancy certain sections of the
-+ * CPHAL code will be bracketed as Critical.
-+ * The OS will provide the function Os.CriticalSection(BOOL), which
-+ * will be passed a TRUE to enter the Critical Section and FALSE to exit.
-+ */
-+
-+/*
-+ * @ingroup CPHAL_Functions
-+ * Clears the statistics information.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return 0 OK, Non-zero not OK
-+ */
-+static int StatsClear(HAL_DEVICE *HalDev)
-+ {
-+ int i;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]StatsClear(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* clear stats */
-+ for (i=0; i<NUM_AAL5_CHAN; i++)
-+ {
-+ HalDev->Stats.CrcErrors[i]=0;
-+ HalDev->Stats.LenErrors[i]=0;
-+ HalDev->Stats.DmaLenErrors[i]=0;
-+ HalDev->Stats.AbortErrors[i]=0;
-+ HalDev->Stats.StarvErrors[i]=0;
-+ HalDev->Stats.TxMisQCnt[i][0]=0;
-+ HalDev->Stats.TxMisQCnt[i][1]=0;
-+ HalDev->Stats.RxMisQCnt[i]=0;
-+ HalDev->Stats.RxEOQCnt[i]=0;
-+ HalDev->Stats.TxEOQCnt[i][0]=0;
-+ HalDev->Stats.TxEOQCnt[i][1]=0;
-+ HalDev->Stats.RxPacketsServiced[i]=0;
-+ HalDev->Stats.TxPacketsServiced[i][0]=0;
-+ HalDev->Stats.TxPacketsServiced[i][1]=0;
-+ HalDev->Stats.TxMaxServiced[i][0]=0;
-+ HalDev->Stats.TxMaxServiced[i][1]=0;
-+ }
-+ HalDev->Stats.RxTotal=0;
-+ HalDev->Stats.TxTotal=0;
-+ HalDev->Stats.RxMaxServiced=0;
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/*
-+ * Returns statistics information.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return 0
-+ */
-+/*
-+static STAT_INFO* StatsGet(HAL_DEVICE *HalDev)
-+ {
-+ STAT_INFO* MyStats = &HalDev->Stats;
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]StatsGet(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ dbgPrintf("HAL Stats:\n");
-+ DispStat(HalDev, "Rx Total",MyStats->RxTotal);
-+ DispStat(HalDev, "Tx Total",MyStats->TxTotal);
-+ DispStat(HalDev, "Rx Peak",MyStats->RxMaxServiced);
-+ DispStat(HalDev, "TxH Peak",MyStats->TxMaxServiced[0][0]);
-+ DispStat(HalDev, "TxL Peak",MyStats->TxMaxServiced[0][1]);
-+ DispChStat(HalDev, "CrcErr",&MyStats->CrcErrors[0],1);
-+ DispChStat(HalDev, "LenErr",&MyStats->LenErrors[0],1);
-+ DispChStat(HalDev, "DmaLenErr",&MyStats->DmaLenErrors[0],1);
-+ DispChStat(HalDev, "AbortErr",&MyStats->AbortErrors[0],1);
-+ DispChStat(HalDev, "StarvErr",&MyStats->StarvErrors[0],1);
-+ DispChStat(HalDev, "TxH MisQ Cnt",&MyStats->TxMisQCnt[0][0],2);
-+ DispChStat(HalDev, "TxL MisQ Cnt",&MyStats->TxMisQCnt[0][1],2);
-+ DispChStat(HalDev, "Rx MisQ Cnt",&MyStats->RxMisQCnt[0],1);
-+ DispChStat(HalDev, "Rx EOQ Cnt",&MyStats->RxEOQCnt[0],1);
-+ DispChStat(HalDev, "TxH EOQ Cnt",&MyStats->TxEOQCnt[0][0],2);
-+ DispChStat(HalDev, "TxL EOQ Cnt",&MyStats->TxEOQCnt[0][1],2);
-+ DispChStat(HalDev, "Rx Pkts",&MyStats->RxPacketsServiced[0],1);
-+ DispChStat(HalDev, "TxH Pkts",&MyStats->TxPacketsServiced[0][0],2);
-+ DispChStat(HalDev, "TxL Pkts",&MyStats->TxPacketsServiced[0][1],2);
-+
-+ return (&HalDev->Stats);
-+ }
-+*/
-+
-+#ifdef __CPHAL_DEBUG
-+void dbgChannelConfigDump(HAL_DEVICE *HalDev, int Ch)
-+ {
-+ CHANNEL_INFO *HalCh = &HalDev->ChData[Ch];
-+ dbgPrintf(" [aal5 Inst %d, Ch %d] Config Dump:\n", HalDev->Inst, Ch);
-+ dbgPrintf(" TxNumBuffers :%08d, TxNumQueues :%08d\n",
-+ HalCh->TxNumBuffers, HalCh->TxNumQueues);
-+ dbgPrintf(" RxNumBuffers :%08d, RxBufSize :%08d\n",
-+ HalCh->RxNumBuffers, HalCh->RxBufSize);
-+ dbgPrintf(" TxServiceMax :%08d, RxServiceMax:%08d\n",
-+ HalCh->TxServiceMax, HalCh->RxServiceMax);
-+ dbgPrintf(" RxBufferOffset:%08d, DaMask :%08d\n",
-+ HalCh->RxBufferOffset, HalCh->DaMask);
-+ dbgPrintf(" CpcsUU :%08d, Gfc :%08d\n",
-+ HalCh->CpcsUU, HalCh->Gfc);
-+ dbgPrintf(" Clp :%08d, Pti :%08d\n",
-+ HalCh->Clp, HalCh->Pti);
-+ dbgPrintf(" Priority :%08d, PktType :%08d\n",
-+ HalCh->Priority, HalCh->PktType);
-+ dbgPrintf(" Vci :%08d, Vpi :%08d\n",
-+ HalCh->Vci, HalCh->Vpi);
-+ dbgPrintf(" TxVc_CellRate :%08d, TxVc_QosType:%08d\n",
-+ HalCh->TxVc_CellRate, HalCh->TxVc_QosType);
-+ dbgPrintf(" TxVc_Mbs :%08d, TxVc_Pcr :%08d\n",
-+ HalCh->TxVc_Mbs, HalCh->TxVc_Pcr);
-+ dbgPrintf(" TxVc_AtmHeader:%08d\n",
-+ HalCh->TxVc_AtmHeader);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+/*
-+ * Retrieves channel parameters from configuration file. Any parameters
-+ * which are not found are ignored, and the HAL default value will apply,
-+ * unless a new value is given through the channel structure in the call
-+ * to ChannelSetup.
-+ */
-+static int ChannelConfigGet(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+ {
-+ unsigned int Ret, Value, Ch = HalChn->Channel;
-+ OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+ void *ChInfo;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]ChannelConfigGet(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
-+ (bit32u)HalChn);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ Ret=OsFunc->DeviceFindParmValue(HalDev->DeviceInfo, channel_names[Ch], &ChInfo);
-+ if (Ret) return (EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_INFO_NOT_FOUND);
-+
-+ /* i don't care if a value is not found because they are optional */
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxNumBuffers", &Value);
-+ if (!Ret) HalDev->ChData[Ch].TxNumBuffers = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxNumQueues", &Value);
-+ if (!Ret) HalDev->ChData[Ch].TxNumQueues = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxServiceMax", &Value);
-+ if (!Ret) HalDev->ChData[Ch].TxServiceMax = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxNumBuffers", &Value);
-+ if (!Ret) HalDev->ChData[Ch].RxNumBuffers = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxBufferOffset", &Value);
-+ if (!Ret) HalDev->ChData[Ch].RxBufferOffset = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxBufSize", &Value);
-+ if (!Ret) HalDev->ChData[Ch].RxBufSize = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxServiceMax", &Value);
-+ if (!Ret) HalDev->ChData[Ch].RxServiceMax = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "CpcsUU", &Value);
-+ if (!Ret) HalDev->ChData[Ch].CpcsUU = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Gfc", &Value);
-+ if (!Ret) HalDev->ChData[Ch].Gfc = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Clp", &Value);
-+ if (!Ret) HalDev->ChData[Ch].Clp = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Pti", &Value);
-+ if (!Ret) HalDev->ChData[Ch].Pti = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "DaMask", &Value);
-+ if (!Ret) HalDev->ChData[Ch].DaMask = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Priority", &Value);
-+ if (!Ret) HalDev->ChData[Ch].Priority = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "PktType", &Value);
-+ if (!Ret) HalDev->ChData[Ch].PktType = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Vci", &Value);
-+ if (!Ret) HalDev->ChData[Ch].Vci = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Vpi", &Value);
-+ if (!Ret) HalDev->ChData[Ch].Vpi = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_CellRate", &Value);
-+ if (!Ret) HalDev->ChData[Ch].TxVc_CellRate = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_QosType", &Value);
-+ if (!Ret) HalDev->ChData[Ch].TxVc_QosType = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_Mbs", &Value);
-+ if (!Ret) HalDev->ChData[Ch].TxVc_Mbs = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_Pcr", &Value);
-+ if (!Ret) HalDev->ChData[Ch].TxVc_Pcr = Value;
-+
-+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_AtmHeader", &Value);
-+ if (!Ret) HalDev->ChData[Ch].TxVc_AtmHeader = Value;
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/*
-+ * Sets up channel parameters in the hardware, and initializes the CPPI
-+ * TX and RX buffer descriptors and buffers.
-+ */
-+static int ChannelConfigApply(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+ {
-+ int j, Ch = HalChn->Channel;
-+ volatile bit32u *pTmp;
-+ int Ret; /* +GSG 030410 */
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]ChannelConfigApply(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
-+ (bit32u)HalChn);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ if ((HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE) || (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE))
-+ {
-+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN);
-+ }
-+
-+ HalDev->InRxInt[Ch]=FALSE;
-+
-+ /* Initialize Queue Data */
-+ HalDev->RxActQueueHead[Ch]=0;
-+ HalDev->RxActQueueCount[Ch]=0;
-+ HalDev->TxActQueueHead[Ch][0]=0;
-+ HalDev->TxActQueueHead[Ch][1]=0;
-+ HalDev->TxActQueueCount[Ch][0]=0;
-+ HalDev->TxActQueueCount[Ch][1]=0;
-+ HalDev->RxActive[Ch] = FALSE;
-+ HalDev->TxActive[Ch][0] = FALSE;
-+ HalDev->TxActive[Ch][1] = FALSE;
-+
-+ /* Clear Rx State RAM */
-+ pTmp = pRX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64);
-+ for (j=0; j<NUM_RX_STATE_WORDS; j++)
-+ *pTmp++ = 0;
-+
-+ /* Check that Rx DMA State RAM was cleared */
-+ pTmp -= NUM_RX_STATE_WORDS;
-+ for (j=0; j<NUM_RX_STATE_WORDS; j++)
-+ {
-+ if (*pTmp++ != 0)
-+ {
-+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_RX_STATE_RAM_NOT_CLEARED);
-+ }
-+ }
-+
-+ /* Clear Tx State RAM */
-+ pTmp = pTX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64);
-+ for (j=0; j<NUM_TX_STATE_WORDS; j++)
-+ *pTmp++ = 0;
-+
-+ /* Check that Tx DMA State RAM was cleared */
-+ pTmp -= NUM_TX_STATE_WORDS;
-+ for (j=0; j<NUM_TX_STATE_WORDS; j++)
-+ {
-+ if (*pTmp++ != 0)
-+ {
-+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_TX_STATE_RAM_NOT_CLEARED);
-+ }
-+ }
-+
-+ /* Initialize Tx State RAM (Nothing to do) */
-+
-+ /* Initialize Rx State RAM */
-+ /* Configure the Rx buffer offset */
-+ pTmp=(pRX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64));
-+ *pTmp |= (HalDev->ChData[Ch].RxBufferOffset & 0xFF);
-+
-+ /* Initialize buffer memory for the channel */
-+ Ret = InitTcb(HalDev, Ch);
-+ if (Ret) return (Ret);
-+
-+ Ret = InitRcb(HalDev, Ch);
-+ if (Ret) return (Ret);
-+
-+ /* setup interrupt mask/enable for the channel */
-+ SAR_TX_MASK_SET(HalDev->dev_base) = (1<<Ch);
-+
-+ /* if using the low priority queue, set up mask for it */
-+ if (HalDev->ChData[Ch].TxNumQueues == 2) /* +GSG 030421 */
-+ SAR_TX_MASK_SET(HalDev->dev_base) = (1<<Ch)<<16; /* +GSG 030421 */
-+
-+ SAR_RX_MASK_SET(HalDev->dev_base) = (1<<Ch);
-+
-+ /* call SAR layer to complete the channel setup - hardware configuration of ch */
-+ Ret = HalDev->SarFunc->ChannelSetup(HalDev->SarDev, &HalDev->ChData[Ch]); /* ~GSG 030410 */
-+ if (Ret) /* +GSG 030410 */
-+ return (Ret); /* +GSG 030410 */
-+
-+ /* channel officially open for business */
-+ HalDev->ChIsOpen[Ch][DIRECTION_TX] = TRUE;
-+ HalDev->ChIsOpen[Ch][DIRECTION_RX] = TRUE;
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/*
-+ * Sets up HAL default channel configuration parameter values.
-+ */
-+static void ChannelConfigInit(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+ {
-+ int Ch = HalChn->Channel;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]ChannelConfigInit(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
-+ (bit32u)HalChn);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ HalDev->ChData[Ch].Channel = Ch;
-+ HalDev->ChData[Ch].TxNumBuffers = cfg_tx_num_bufs[Ch];
-+ HalDev->ChData[Ch].RxNumBuffers = cfg_rx_num_bufs[Ch];
-+ HalDev->ChData[Ch].RxBufSize = cfg_rx_buf_size[Ch];
-+ HalDev->ChData[Ch].RxBufferOffset = cfg_rx_buf_offset[Ch];
-+ HalDev->ChData[Ch].TxNumQueues = cfg_tx_num_queues[Ch];
-+ HalDev->ChData[Ch].CpcsUU = cfg_cpcs_uu[Ch];
-+ HalDev->ChData[Ch].DaMask = cfg_da_mask[Ch];
-+ HalDev->ChData[Ch].Priority = cfg_priority[Ch];
-+ HalDev->ChData[Ch].PktType = cfg_pkt_type[Ch];
-+ HalDev->ChData[Ch].Vci = cfg_vci[Ch];
-+ HalDev->ChData[Ch].Vpi = cfg_vpi[Ch];
-+ HalDev->ChData[Ch].TxVc_CellRate = cfg_cell_rate[Ch];
-+ HalDev->ChData[Ch].TxVc_QosType = cfg_qos_type[Ch];
-+ HalDev->ChData[Ch].TxVc_Mbs = cfg_mbs[Ch];
-+ HalDev->ChData[Ch].TxVc_Pcr = cfg_pcr[Ch];
-+ HalDev->ChData[Ch].Gfc = cfg_gfc[Ch];
-+ HalDev->ChData[Ch].Clp = cfg_clp[Ch];
-+ HalDev->ChData[Ch].Pti = cfg_pti[Ch];
-+ HalDev->ChData[Ch].RxServiceMax = cfg_rx_max_service[Ch];
-+ HalDev->ChData[Ch].TxServiceMax = cfg_tx_max_service[Ch];
-+ }
-+
-+/*
-+ * Update per channel data in the HalDev based channel structure.
-+ * If a certain channel parameter has been passed with the HAL_DEFAULT
-+ * value (0xFFFFFFFF), then do not copy it.
-+ */
-+static void ChannelConfigUpdate(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn)
-+ {
-+ int Ch = HalChn->Channel;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]ChannelConfigUpdate(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev,
-+ (bit32u)HalChn);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ HalDev->ChData[Ch].Channel = Ch;
-+
-+ /* ChannelUpdate is a macro defined in cpcommon.h. It requires
-+ the presence of the variables named 'Ch' and 'HalChn'.*/
-+ ChannelUpdate(DaMask);
-+ ChannelUpdate(Priority);
-+ ChannelUpdate(PktType);
-+ ChannelUpdate(Vci);
-+ ChannelUpdate(Vpi);
-+ ChannelUpdate(CpcsUU);
-+ ChannelUpdate(Gfc);
-+ ChannelUpdate(Clp);
-+ ChannelUpdate(Pti);
-+ /* AAL5 Stuff */
-+ ChannelUpdate(TxNumBuffers);
-+ ChannelUpdate(RxNumBuffers);
-+ ChannelUpdate(RxBufSize);
-+ ChannelUpdate(RxBufferOffset);
-+ ChannelUpdate(TxNumQueues);
-+ ChannelUpdate(TxServiceMax);
-+ ChannelUpdate(RxServiceMax);
-+ /* PDSP STATE RAM */
-+ ChannelUpdate(TxVc_CellRate);
-+ ChannelUpdate(TxVc_QosType);
-+ ChannelUpdate(TxVc_Mbs);
-+ ChannelUpdate(TxVc_Pcr);
-+ /* OAM */
-+ ChannelUpdate(TxVc_AtmHeader);
-+ ChannelUpdate(TxVc_OamTc);
-+ ChannelUpdate(TxVc_VpOffset);
-+ ChannelUpdate(RxVc_OamCh);
-+ ChannelUpdate(RxVc_OamToHost);
-+ ChannelUpdate(RxVc_AtmHeader);
-+ ChannelUpdate(RxVc_VpOffset);
-+ ChannelUpdate(RxVc_OamTc);
-+ ChannelUpdate(TxVp_AtmHeader);
-+ ChannelUpdate(TxVp_OamTc);
-+ ChannelUpdate(RxVp_AtmHeader);
-+ ChannelUpdate(RxVp_OamCh);
-+ ChannelUpdate(RxVp_OamTc);
-+ ChannelUpdate(RxVp_OamToHost);
-+ ChannelUpdate(RxVp_OamVcList);
-+ ChannelUpdate(FwdUnkVc);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * This function opens the specified channel. The caller must populate
-+ * the @p HalCh structure. CPHAL default values may be requested for any or all
-+ * members of the @p HalCh structure by supplying a value of 0xFFFFFFFF for the
-+ * given member. The @p OsSetup parameter is a pointer to an OS defined
-+ * data structure. If the CPHAL later calls @c MallocRxBuffer(), this pointer
-+ * is returned in that call.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param HalCh Per channel information structure. Implementation specific.
-+ * @param OsSetup Pointer to an OS-defined data structure.
-+ *
-+ * @return EC_NO_ERRORS (ok). <BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ * @ref EC_VAL_NULL_CH_STRUCT "EC_VAL_NULL_CH_STRUCT"<BR>
-+ * @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
-+ * @ref EC_VAL_CH_ALREADY_OPEN "EC_VAL_CH_ALREADY_OPEN"<BR>
-+ * @ref EC_VAL_RX_STATE_RAM_NOT_CLEARED "EC_VAL_RX_STATE_RAM_NOT_CLEARED"<BR>
-+ * @ref EC_VAL_TX_STATE_RAM_NOT_CLEARED "EC_VAL_TX_STATE_RAM_NOT_CLEARED"<BR>
-+ * @ref EC_VAL_TCB_MALLOC_FAILED "EC_VAL_TCB_MALLOC_FAILED"<BR>
-+ * @ref EC_VAL_RCB_MALLOC_FAILED "EC_VAL_RCB_MALLOC_FAILED"<BR>
-+ * @ref EC_VAL_RX_BUFFER_MALLOC_FAILED "EC_VAL_RX_BUFFER_MALLOC_FAILED"<BR>
-+ * @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
-+ */
-+static int halChannelSetup(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup)
-+ {
-+ int Ch, Ret;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]halChannelSetup(HalDev:%08x, HalCh:%08x, OsSetup:%08x)\n", (bit32u)HalDev,
-+ (bit32u)HalCh, (bit32u)OsSetup);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Verify proper device state */
-+ if (HalDev->State < enInitialized)
-+ return (EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE);
-+
-+ /* We require the channel structure to be passed, even if it only contains
-+ the channel number */
-+ if (HalCh == NULL)
-+ {
-+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_NULL_CH_STRUCT);
-+ }
-+
-+ Ch = HalCh->Channel;
-+
-+ if ((Ch < 0) || (Ch > MAX_AAL5_CHAN))
-+ {
-+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_INVALID_CH);
-+ }
-+
-+ /* if channel is already open, this call is invalid */
-+ if ((HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE) || (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE))
-+ {
-+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN);
-+ }
-+
-+ /* channel is closed, but might be setup. If so, reopen the hardware channel. */
-+ if ((HalDev->ChIsSetup[Ch][DIRECTION_TX] == FALSE) && (HalDev->ChIsSetup[Ch][DIRECTION_RX] == FALSE))
-+ {
-+ /* Setup channel configuration */
-+ /* Store OS_SETUP */
-+ HalDev->ChData[Ch].OsSetup = OsSetup; /* ~GSG 030508 */
-+
-+ /* setup HAL default values for this channel first */
-+ ChannelConfigInit(HalDev, HalCh);
-+
-+ /* retrieve options.conf channel parameters */
-+ /* currently ignoring return value, making the choice that it's okay if
-+ the user does not supply channel configuration in the data store */
-+ ChannelConfigGet(HalDev, HalCh);
-+
-+ /* update HalDev with data given in HalCh */
-+ ChannelConfigUpdate(HalDev, HalCh);
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(8))
-+ {
-+ dbgChannelConfigDump(HalDev, Ch);
-+ }
-+#endif
-+
-+ /* HalDev->ChIsSetup[Ch][0] = TRUE; */
-+ HalDev->ChIsSetup[Ch][DIRECTION_TX] = TRUE;
-+ HalDev->ChIsSetup[Ch][DIRECTION_RX] = TRUE;
-+
-+ /* I don't initialize RcbStart or TcbStart here because their values may be
-+ reused across several Setup/Teardown calls */
-+ }
-+
-+ /* If the hardware has been opened (is out of reset), then configure the channel
-+ in the hardware. NOTE: ChannelConfigApply calls the CPSAR ChannelSetup()! */
-+ if (HalDev->State == enOpened)
-+ {
-+ Ret = ChannelConfigApply(HalDev, HalCh);
-+ if (Ret) return (Ret);
-+ }
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/*
-+ * This function configures the rate at which the OAM timer scheduler
-+ * channels will be scheduled. The value of OamRate is the number of
-+ * clock ticks between cell transmissions (if OAM function is sourcing
-+ * cells), or the number of clock ticks between events or absence of events
-+ * (if OAM function is sinking cells). The value of i indicates
-+ * which OAM function to apply the rate to. A list is given below.
-+ *
-+ * @par Oam Function Values
-+ * - 0 : Loopback source
-+ * - 1 : F4 CC source
-+ * - 2 : F5 CC source
-+ * - 3 : F4 CC sink
-+ * - 4 : F5 CC sink
-+ * - 5 : F4 TX AIS source
-+ * - 6 : F5 TX AIS source
-+ * - 7 : F4 RX RDI source
-+ * - 8 : F5 RX RDI source
-+ * - 9 : F4 AIS monitor
-+ * - 10 : F5 AIS monitor
-+ *
-+ * The following is information on how to calculate the OAM rate. There
-+ * is only one OAM timer that is shared among all channels. Therefore, if
-+ * you wanted an OAM source function (ex. F4 CC source) to generate 1 cell/sec
-+ * across 8 channels, you would need to configure the OAM timer to schedule 8
-+ * cells/sec. In addition, the credits are shared between segment and end-to-end
-+ * type OAM cells, so if you were sending both types of cells, you would
-+ * need to configure the OAM timer for 16 cells/sec. However, the clock
-+ * rate must be specified in clock ticks between events. Using an example
-+ * clock rate of 125 MHz, the rate in clock ticks can be calculated by
-+ * dividing 125 Mhz by 16 cells/sec. The results is 7812500 ticks. Thus,
-+ * every 7812500 clock cycles, an OAM cell will be generated for the F4 CC
-+ * Source function.
-+ */
-+static void OamRateConfig(HAL_DEVICE *HalDev)
-+ {
-+ int i;
-+ bit32u OamRate, Freq = HalDev->SarFrequency;
-+
-+ /* Configure OAM Timer State Block */
-+ for (i=0; i<NUM_OAM_RATES; i++)
-+ {
-+ switch(i)
-+ {
-+ case 0: OamRate = ((Freq/1000)*HalDev->OamLbTimeout);
-+ break;
-+ case 1:
-+ case 2:
-+ case 5:
-+ case 6:
-+ case 7:
-+ case 8: OamRate = (Freq/38);
-+ break;
-+ case 3:
-+ case 4: OamRate = ((Freq*3) + (Freq/2))/38;
-+ break;
-+ case 9:
-+ case 10: OamRate = ((Freq*2) + (Freq/2))/38;
-+ break;
-+ default: OamRate = (Freq*5);
-+ break;
-+ }
-+
-+ *(pOAM_TIMER_STATE_WORD_0(HalDev->dev_base) + (i*64) + 1) = OamRate;
-+ }
-+ }
-+
-+/**
-+ * @ingroup AAL5_Functions
-+ * This function is used to enable OAM functions (other than loopback) for a
-+ * particular channel. The channel (embedded within OamConfig - see below) must
-+ * have been configured for firmware OAM (not host OAM) for these configurations
-+ * to take effect. More than one function may be enabled at one time.
-+ * If more than one function is enabled, they must all be of the same level, all
-+ * F4(VP) or all F5(VC).
-+ *
-+ * The usage of the OamConfig parameter is described through the table below. To
-+ * initiate firmware OAM, set one or more bits in OamConfig corresponding to the
-+ * various OAM functions. To disable firmware OAM functions, set bit 30 along
-+ * with any other combination of bits to shutdown various OAM functions at once.
-+ *
-+ * Acronyms:
-+ * e2e - end to end, seg - segment, CC - continuity check,
-+ * AIS - Alarm Indication Signal
-+ *
-+ * @par Bit: Function: Description
-+ * - 31: Reserved:
-+ * - 30: Setup/Teardown: 0 - enable, 1 - disable (Note 1)
-+ * - 29: F4 CC Source seg: 0 - no action, 1 - configure
-+ * - 28: F4 CC Source e2e: 0 - no action, 1 - configure
-+ * - 27: F4 AIS Source seg: 0 - no action, 1 - configure
-+ * - 26: F4 AIS Source e2e: 0 - no action, 1 - configure
-+ * - 25: F5 CC Source seg: 0 - no action, 1 - configure
-+ * - 24: F5 CC Source e2e: 0 - no action, 1 - configure
-+ * - 23: F5 AIS Source seg: 0 - no action, 1 - configure
-+ * - 22: F5 AIS Source e2e: 0 - no action, 1 - configure
-+ * - 21: F4 CC Sink seg: 0 - no action, 1 - configure
-+ * - 20: F4 CC Sink e2e: 0 - no action, 1 - configure
-+ * - 19: F5 CC Sink seg: 0 - no action, 1 - configure
-+ * - 18: F5 CC Sink e2e: 0 - no action, 1 - configure
-+ * - 17:8: Reserved:
-+ * - 7:0: Channel: AAL5/AAL2 VC/VP channel (Note 2)
-+ *
-+ *
-+ * Note 1: This bit must be clear to enable the specified OAM function.
-+ * Note 2: This must specify the VC channel for F5 functions, and the VP
-+ * channel for F4 functions.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param OamConfig A 32-bit integer field defined as follows:
-+ */
-+static void halOamFuncConfig(HAL_DEVICE *HalDev, unsigned int OamConfig)
-+ {
-+ /* GPR 0 */
-+ SAR_PDSP_HOST_OAM_CONFIG_REG(HalDev->dev_base) = OamConfig;
-+ }
-+
-+/**
-+ * @ingroup AAL5_Functions
-+ * This function is used to enable OAM loopback functions for a particular
-+ * channel. The channel (embedded within OamConfig - see below) must have been
-+ * configured for firmware OAM (not host OAM) for these configurations to take
-+ * effect. Only one loopback function can be enabled at a time.
-+ *
-+ * The LLID is inserted into to the OAM cell's LLID field, and it specifies the
-+ * LLID of the connection point in the network where the generated loopback cell
-+ * should be turned around. The LLID is composed of 4 32-bit words, and this
-+ * function expects the caller to pass an array of 4 words in the LLID field.
-+ * The CorrelationTag is a 32-bit word that the PDSP uses to correlate loopback
-+ * commands with loopback responses. It should simply be changed for each
-+ * call, and there is no restriction on the value used for CorrelationTag.
-+ *
-+ * The usage of the OamConfig parameter is described through the table below. To
-+ * initiate firmware OAM, set one of the bits corresponding to the
-+ * various loopback OAM functions. Note that only one loopback source may be
-+ * commanded at a time.
-+ *
-+ * Acronyms:
-+ * e2e - end to end, seg - segment, LB - loopback
-+ *
-+ * @par Bit: Function: Description
-+ * - 31:16: Reserved:
-+ * - 15: F4 LB Source seg: 0 - no action, 1 - configure (Note 1)
-+ * - 14: F4 LB Source seg: 0 - no action, 1 - configure (Note 1)
-+ * - 13: F4 LB Source e2e: 0 - no action, 1 - configure (Note 1)
-+ * - 12: F4 LB Source e2e: 0 - no action, 1 - configure (Note 1)
-+ * - 11:8: Reserved:
-+ * - 7:0: Channel: AAL5/AAL2 VC/VP channel (Note 2)
-+ *
-+ *
-+ * Note 1: Only one LB function may be enabled at one time. Once enabled,
-+ * the PDSP will time out after 5 seconds. The host must wait until it
-+ * has received the result of the current LB request before initiating
-+ * a new request. <BR>
-+ * Note 2: This must specify the VC channel for F5 functions, and the VP
-+ * channel for F4 functions.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param OamConfig A 32-bit integer field defined as follows:
-+ * @param LLID Loopback Location Identifier (passed as 4 word array).
-+ * Must be configured in big endian format.
-+ * @param CorrelationTag 32-bit tag correlates loopback commands with loopback
-+ * responses. Must be configured in big endian format.
-+ *
-+ */
-+static void halOamLoopbackConfig(HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag)
-+ {
-+ volatile bit32u *tmp;
-+
-+ /* test to see if this is a loopback command */
-+ if (OamConfig & 0xf000)
-+ {
-+ /* write the OAM correlation tag (GPR 1) */
-+ SAR_PDSP_OAM_CORR_REG(HalDev->dev_base) = CorrelationTag;
-+
-+ /* write the LLID */
-+ tmp = pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base);
-+
-+ /* advance past the CPID */
-+ tmp += 4;
-+
-+ *tmp++ = LLID[0];
-+ *tmp++ = LLID[1];
-+ *tmp++ = LLID[2];
-+ *tmp = LLID[3];
-+
-+ /* GPR 0 */
-+ SAR_PDSP_HOST_OAM_CONFIG_REG(HalDev->dev_base) = OamConfig;
-+ }
-+ }
-+
-+/*
-+ * This function allows the host software to access any register directly.
-+ * Primarily used for debug.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param RegOffset Hexadecimal offset to desired register (from device base addr)
-+ *
-+ * @return Volatile pointer to desired register.
-+ */
-+static volatile bit32u* halRegAccess(HAL_DEVICE *HalDev, bit32u RegOffset)
-+ {
-+ /* compute the register address */
-+ return ((volatile bit32u *)(HalDev->dev_base + RegOffset));
-+ }
-+
-+#ifdef __CPHAL_DEBUG
-+static void dbgConfigDump(HAL_DEVICE *HalDev)
-+ {
-+ dbgPrintf(" AAL5 Inst %d Config Dump:\n", HalDev->Inst);
-+ dbgPrintf(" Base :%08x, offset:%08d\n",
-+ HalDev->dev_base, HalDev->offset);
-+ dbgPrintf(" Interrupt:%08d, debug :%08d\n",
-+ HalDev->interrupt, HalDev->debug);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * Performs a variety of control functions on the CPHAL module. It is used to
-+ * modify/read configuration parameters and to initiate internal functions.
-+ * The @p Key indicates the function to perform or the parameter to access (note
-+ * that these Keys are identical to those used in accessing the configuration data
-+ * store). @p Action is applicable to parameters only, and indicates what the
-+ * CPHAL should do with the parameter (i.e. "Set", "Get", etc..). The actions
-+ * for each parameter are defined in the module specific documentation.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param Key Key specifying the parameter to change or internal function to initiate. See module specific documentation for available keys.
-+ * @param Action Specifies the action to take. See module specific documentation for available actions.
-+ * @param Value Pointer to new value for given @p Key parameter ("Set"), or returned value of Key ("Get").
-+ *
-+ * @return EC_NO_ERRORS (ok).<BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ * @ref EC_VAL_KEY_NOT_FOUND "EC_VAL_KEY_NOT_FOUND"<BR>
-+ * @ref EC_VAL_ACTION_NOT_FOUND "EC_VAL_ACTION_NOT_FOUND"<BR>
-+ */
-+static int halControl(HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value)
-+ {
-+ int Level, Ch, KeyFound=0, ActionFound=0, rc=EC_NO_ERRORS, Queue;
-+ char *TmpKey = (char *)Key;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]halControl(HalDev:%08x, Key:%s, Action:%s, Value:%08x)\n", (bit32u)HalDev,
-+ Key, Action, (bit32u)Value);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Verify proper device state */
-+ if (HalDev->State < enInitialized)
-+ return (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_STATE);
-+
-+ if (HalDev->OsFunc->Strcmpi(Key, "Debug") == 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ HalDev->debug = *(int *)Value;
-+ /* also setup debug variable in CPSAR module */
-+ rc = HalDev->SarFunc->Control(HalDev->SarDev, "Debug", "Set", Value);
-+ }
-+ }
-+
-+ if (HalDev->OsFunc->Strstr(Key, "FwdUnkVc.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("FwdUnkVc.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ HalDev->ChData[Ch].FwdUnkVc = *(int *)Value;
-+
-+ if ((HalDev->State == enOpened) && (HalDev->ChData[Ch].PktType == 3))
-+ rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value);
-+ }
-+ }
-+
-+ /* +GSG 030407 */
-+ if (HalDev->OsFunc->Strcmpi(Key, "OamMode") == 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value);
-+ }
-+
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+ rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value);
-+ }
-+ }
-+
-+ /* +GSG 030307 */
-+ if (HalDev->OsFunc->Strcmpi(Key, "Version") == 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+ *(const char **)Value = pszVersion_CPAAL5;
-+ }
-+ }
-+
-+ /* +GSG 030529 */
-+ if (HalDev->OsFunc->Strcmpi(Key, "TurboDslErrors") == 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+ *(int *)Value = HalDev->TurboDslErrors;
-+ }
-+ }
-+
-+ /* +GSG 030416 */
-+ if (HalDev->OsFunc->Strcmpi(Key, "F4_LB_Counter") == 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+ *(int *)Value = SAR_PDSP_OAM_F4_LB_COUNT_REG(HalDev->dev_base);
-+ }
-+ }
-+
-+ /* +GSG 030416 */
-+ if (HalDev->OsFunc->Strcmpi(Key, "F5_LB_Counter") == 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+ *(int *)Value = SAR_PDSP_OAM_F5_LB_COUNT_REG(HalDev->dev_base);
-+ }
-+ }
-+
-+ if (HalDev->OsFunc->Strstr(Key, "Stats;") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+ TmpKey += HalDev->OsFunc->Strlen("Stats;");
-+ Level = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+ TmpKey++;
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+ TmpKey++;
-+ Queue = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+ TmpKey++;
-+ StatsGet(HalDev, (void **)Value, Level, Ch, Queue);
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #100 */
-+ if (HalDev->OsFunc->Strstr(Key, "Gfc.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("Gfc.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].Gfc = *(int *)Value;
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #100 */
-+ if (HalDev->OsFunc->Strstr(Key, "Clp.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("Clp.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].Clp = *(int *)Value;
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #100 */
-+ if (HalDev->OsFunc->Strstr(Key, "Pti.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("Pti.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].Pti = *(int *)Value;
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #100 */
-+ if (HalDev->OsFunc->Strstr(Key, "CpcsUU.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("CpcsUU.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].CpcsUU = *(int *)Value;
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #100 */
-+ if (HalDev->OsFunc->Strstr(Key, "TxVc_CellRate.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("TxVc_CellRate.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].TxVc_CellRate = *(int *)Value;
-+
-+ /* now, apply to PDSP state RAM */
-+ if (HalDev->State == enOpened)
-+ *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))= HalDev->ChData[Ch].TxVc_CellRate;
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #100 */
-+ if (HalDev->OsFunc->Strstr(Key, "TxVc_Mbs.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("TxVc_Mbs.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].TxVc_Mbs = *(int *)Value;
-+
-+ /* now, apply to PDSP state RAM */
-+ if (HalDev->State == enOpened)
-+ *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)= HalDev->ChData[Ch].TxVc_Mbs;
-+ }
-+ }
-+
-+ if (HalDev->OsFunc->Strstr(Key, "TxVc_AtmHeader.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("TxVc_AtmHeader.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].TxVc_AtmHeader = *(int *)Value;
-+
-+ /* now, apply to PDSP state RAM */
-+ if (HalDev->State == enOpened)
-+ *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+6)= HalDev->ChData[Ch].TxVc_AtmHeader;
-+ }
-+ }
-+
-+ if (HalDev->OsFunc->Strstr(Key, "TxVp_AtmHeader.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("TxVp_AtmHeader.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].TxVp_AtmHeader = *(int *)Value;
-+
-+ /* now, apply to PDSP state RAM */
-+ if (HalDev->State == enOpened)
-+ *(pPDSP_AAL5_TX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64))= HalDev->ChData[Ch].TxVp_AtmHeader;
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #100 */
-+ if (HalDev->OsFunc->Strstr(Key, "TxVc_Pcr.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("TxVc_Pcr.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].TxVc_Pcr = *(int *)Value;
-+
-+ /* now, apply to PDSP state RAM */
-+ if (HalDev->State == enOpened)
-+ *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+4)= HalDev->ChData[Ch].TxVc_Pcr;
-+ }
-+ }
-+
-+ /* +GSG 030428 */
-+ if (HalDev->OsFunc->Strstr(Key, "RxVc_OamCh.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("RxVc_OamCh.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].RxVc_OamCh = (*(int *)Value) & 0xff;
-+
-+ /* now, apply to PDSP state RAM */
-+ if (HalDev->State == enOpened)
-+ *(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)) |= HalDev->ChData[Ch].RxVc_OamCh;
-+ }
-+ }
-+
-+ /* +GSG 030428 */
-+ if (HalDev->OsFunc->Strstr(Key, "RxVp_OamCh.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("RxVp_OamCh.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* first, store new value in our channel structure */
-+ HalDev->ChData[Ch].RxVp_OamCh = (*(int *)Value) & 0xff;
-+
-+ /* now, apply to PDSP state RAM */
-+ if (HalDev->State == enOpened)
-+ *(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1) |= HalDev->ChData[Ch].RxVp_OamCh;
-+ }
-+ }
-+
-+ /* +GSG 030304 */
-+ /* Fixes PITS #98 */
-+ if (HalDev->OsFunc->Strstr(Key, "PdspEnable") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* this variable is controlled by the CPSAR module */
-+ if (HalDev->State == enOpened)
-+ {
-+ rc=HalDev->SarFunc->Control(HalDev->SarDev, "PdspEnable", "Set", Value);
-+ }
-+ }
-+ }
-+
-+ if (HalDev->OsFunc->Strstr(Key, "OamLbTimeout") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+
-+ HalDev->OamLbTimeout = *(int *)Value;
-+ /* this variable is controlled by the CPSAR module */
-+ if (HalDev->State == enOpened)
-+ {
-+ *(pOAM_TIMER_STATE_WORD_0(HalDev->dev_base) + 1) =
-+ ((HalDev->SarFrequency/1000) * HalDev->OamLbTimeout);
-+ }
-+ }
-+ }
-+
-+ /* +GSG 030306 (PITS #114) */
-+ if (HalDev->OsFunc->Strstr(Key, "DeviceCPID") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ unsigned int* local = (unsigned int *)Value;
-+ ActionFound=1;
-+ /* first, store new value in our hal structure */
-+ HalDev->DeviceCPID[0] = local[0];
-+ HalDev->DeviceCPID[1] = local[1];
-+ HalDev->DeviceCPID[2] = local[2];
-+ HalDev->DeviceCPID[3] = local[3];
-+
-+ /* now, apply to PDSP state RAM */
-+ if (HalDev->State == enOpened)
-+ {
-+ *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 0) = HalDev->DeviceCPID[0];
-+ *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 1) = HalDev->DeviceCPID[1];
-+ *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 2) = HalDev->DeviceCPID[2];
-+ *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 3) = HalDev->DeviceCPID[3];
-+ }
-+ }
-+ }
-+
-+ /* +GSG 030304 */
-+ /* Fixes PITS #99 */
-+ if (HalDev->OsFunc->Strstr(Key, "StrictPriority") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* used in halOpen to decide which interrupt handler to use */
-+ HalDev->StrictPriority = *(int *)Value;
-+ }
-+ }
-+
-+ if (HalDev->OsFunc->Strstr(Key, hcMaxFrags) != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+
-+ if ((*(int *)Value) > 0)
-+ HalDev->MaxFrags = *(int *)Value;
-+ else
-+ rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_VALUE);
-+ }
-+
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+
-+ *(int *)Value = HalDev->MaxFrags;
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #103 */
-+ if (HalDev->OsFunc->Strstr(Key, "RxVc_RDICount.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("RxVc_RDICount.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* PDSP's Rx VC State word 3 contains the value */
-+ if (HalDev->State == enOpened)
-+ {
-+ *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))) & RDI_CNT_MASK)>>RDI_CNT_SHIFT);
-+ }
-+ }
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("RxVc_RDICount.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* All sets write 0, this action is a clear only */
-+ if (HalDev->State == enOpened)
-+ {
-+ (*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))) &=~ RDI_CNT_MASK;
-+ }
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #103 */
-+ if (HalDev->OsFunc->Strstr(Key, "RxVc_AISseg.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("RxVc_AISseg.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* PDSP's Rx VC State word 3 contains the value */
-+ if (HalDev->State == enOpened)
-+ {
-+ *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+3)) & AIS_SEG_MASK)>>AIS_SEG_SHIFT);
-+ }
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #103 */
-+ if (HalDev->OsFunc->Strstr(Key, "RxVc_AISetoe.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("RxVc_AISetoe.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* PDSP's Rx VC State word 3 contains the value */
-+ if (HalDev->State == enOpened)
-+ {
-+ *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+3)) & AIS_ETOE_MASK)>>AIS_ETOE_SHIFT);
-+ }
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #103 */
-+ if (HalDev->OsFunc->Strstr(Key, "RxVp_RDICount.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("RxVp_RDICount.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* PDSP's Rx VC State word 3 contains the value */
-+ if (HalDev->State == enOpened)
-+ {
-+ *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1)) & RDI_CNT_MASK)>>RDI_CNT_SHIFT);
-+ }
-+ }
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("RxVp_RDICount.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* All sets write 0, this action is a clear only */
-+ if (HalDev->State == enOpened)
-+ {
-+ (*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1)) &=~ RDI_CNT_MASK;
-+ }
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #103 */
-+ if (HalDev->OsFunc->Strstr(Key, "RxVp_AISseg.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("RxVp_AISseg.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* PDSP's Rx VC State word 3 contains the value */
-+ if (HalDev->State == enOpened)
-+ {
-+ *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)) & AIS_SEG_MASK)>>AIS_SEG_SHIFT);
-+ }
-+ }
-+ }
-+
-+ /* +GSG 030306 */
-+ /* Fixes PITS #103 */
-+ if (HalDev->OsFunc->Strstr(Key, "RxVp_AISetoe.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("RxVp_AISetoe.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* PDSP's Rx VC State word 3 contains the value */
-+ if (HalDev->State == enOpened)
-+ {
-+ *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)) & AIS_ETOE_MASK)>>AIS_ETOE_SHIFT);
-+ }
-+ }
-+ }
-+
-+ if (KeyFound == 0)
-+ rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND);
-+
-+ if (ActionFound == 0)
-+ rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND);
-+
-+ return(rc);
-+ }
-+
-+/*
-+ * Sets up HAL default configuration parameter values.
-+ */
-+static void ConfigInit(HAL_DEVICE *HalDev)
-+ {
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]ConfigInit(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* configure some defaults with tnetx7300 values */
-+ HalDev->dev_base = 0xa3000000;
-+ HalDev->offset = 0;
-+ HalDev->interrupt = 15;
-+ HalDev->debug = 0;
-+ HalDev->MaxFrags = 46;
-+ HalDev->OamLbTimeout = 5000;
-+ }
-+
-+/*
-+ * Retrieve HAL configuration parameter values.
-+ */
-+static bit32u ConfigGet(HAL_DEVICE *HalDev)
-+ {
-+ bit32u Ret;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]ConfigGet(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* get the configuration parameters common to all modules */
-+ Ret = ConfigGetCommon(HalDev);
-+ if (Ret) return (EC_AAL5|Ret);
-+
-+ /* get AAL5 specific configuration parameters here */
-+ Ret = HalDev->OsFunc->Control(HalDev->OsDev, hcSarFrequency, pszGET, &HalDev->SarFrequency); /* GSG +030416*/
-+ if (Ret) /* GSG +030416*/
-+ HalDev->SarFrequency = 200000000; /* 200 Mhz default */ /* GSG +030416*/
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * This function initializes the CPHAL module. It gathers all
-+ * necessary global configuration info from the configuration file, and
-+ * performs initialization and configuration of the device. Note that
-+ * the device operation is not started until the OS calls @c Open().
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return EC_NO_ERRORS (ok). <BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ * @ref EC_VAL_BASE_ADDR_NOT_FOUND "EC_VAL_BASE_ADDR_NOT_FOUND"<BR>
-+ * @ref EC_VAL_RESET_BIT_NOT_FOUND "EC_VAL_RESET_BIT_NOT_FOUND"<BR>
-+ * @ref EC_VAL_INTERRUPT_NOT_FOUND "EC_VAL_INTERRUPT_NOT_FOUND"<BR>
-+ * @ref EC_VAL_OFFSET_NOT_FOUND "EC_VAL_OFFSET_NOT_FOUND"<BR>
-+ */
-+static int halInit(HAL_DEVICE *HalDev)
-+ {
-+ int i;
-+ bit32u error_code;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]halInit(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Verify proper device state */
-+ if (HalDev->State != enDevFound)
-+ return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_INVALID_STATE);
-+
-+ /* Configure HAL defaults */
-+ ConfigInit(HalDev);
-+
-+ /* Retrieve HAL configuration parameters from data store */
-+ error_code = ConfigGet(HalDev);
-+ if (error_code) return (error_code);
-+
-+ /* Other items (OAM related) that need to be passed in somehow */
-+ HalDev->DeviceCPID[0] = 0xffffffff;
-+ HalDev->DeviceCPID[1] = 0xffffffff;
-+ HalDev->DeviceCPID[2] = 0xffffffff;
-+ HalDev->DeviceCPID[3] = 0xffffffff;
-+ HalDev->LBSourceLLID[0] = 0xffffffff;
-+ HalDev->LBSourceLLID[1] = 0xffffffff;
-+ HalDev->LBSourceLLID[2] = 0xffffffff;
-+ HalDev->LBSourceLLID[3] = 0xffffffff;
-+
-+ /* Initialize SAR layer*/
-+ error_code = HalDev->SarFunc->Init(HalDev->SarDev);
-+ if (error_code) return (error_code);
-+
-+ /* Initialize various HalDev members. This is probably overkill, since these
-+ are initialized in ChannelSetup() and HalDev is cleared in InitModule(). */
-+ for (i=0; i<NUM_AAL5_CHAN; i++)
-+ {
-+ HalDev->InRxInt[i]=FALSE;
-+ HalDev->ChIsOpen[i][DIRECTION_TX] = FALSE;
-+ HalDev->ChIsOpen[i][DIRECTION_RX] = FALSE;
-+ HalDev->TcbStart[i][0] = 0;
-+ HalDev->TcbStart[i][1] = 0;
-+ HalDev->RcbStart[i] = 0;
-+ }
-+
-+ /* initialize SAR stats */
-+ StatsClear(HalDev);
-+
-+ /* init Stat pointers */
-+
-+ /* even though these statistics may be for multiple channels/queues, i need
-+ only configure the pointer to the beginning of the array, and I can index
-+ from there if necessary */
-+ StatsTable0[0].StatPtr = &HalDev->Stats.CrcErrors[0];
-+ StatsTable0[1].StatPtr = &HalDev->Stats.LenErrors[0];
-+ StatsTable0[2].StatPtr = &HalDev->Stats.AbortErrors[0];
-+ StatsTable0[3].StatPtr = &HalDev->Stats.StarvErrors[0];
-+
-+ StatsTable1[0].StatPtr = &HalDev->Stats.DmaLenErrors[0];
-+ StatsTable1[1].StatPtr = &HalDev->Stats.TxMisQCnt[0][0];
-+ StatsTable1[2].StatPtr = &HalDev->Stats.RxMisQCnt[0];
-+ StatsTable1[3].StatPtr = &HalDev->Stats.TxEOQCnt[0][0];
-+ StatsTable1[4].StatPtr = &HalDev->Stats.RxEOQCnt[0];
-+ StatsTable1[5].StatPtr = &HalDev->Stats.RxPacketsServiced[0];
-+ StatsTable1[6].StatPtr = &HalDev->Stats.TxPacketsServiced[0][0];
-+ StatsTable1[7].StatPtr = &HalDev->Stats.RxMaxServiced;
-+ StatsTable1[8].StatPtr = &HalDev->Stats.TxMaxServiced[0][0];
-+ StatsTable1[9].StatPtr = &HalDev->Stats.RxTotal;
-+ StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
-+
-+ StatsTable2[0].StatPtr = (bit32u *)&HalDev->RcbPool[0];
-+ StatsTable2[1].StatPtr = &HalDev->RxActQueueCount[0];
-+ StatsTable2[2].StatPtr = (bit32u *)&HalDev->RxActQueueHead[0];
-+ StatsTable2[3].StatPtr = (bit32u *)&HalDev->RxActQueueTail[0];
-+ StatsTable2[4].StatPtr = &HalDev->RxActive[0];
-+ StatsTable2[5].StatPtr = (bit32u *)&HalDev->RcbStart[0];
-+ StatsTable2[6].StatPtr = &HalDev->RxTeardownPending[0];
-+ StatsTable2[7].StatPtr = (bit32u *)&HalDev->TcbPool[0][0];
-+ StatsTable2[8].StatPtr = &HalDev->TxActQueueCount[0][0];
-+ StatsTable2[9].StatPtr = (bit32u *)&HalDev->TxActQueueHead[0][0];
-+ StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
-+ StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
-+ StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
-+ StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
-+
-+ StatsTable4[0].StatPtr = &HalDev->dev_base;
-+ StatsTable4[1].StatPtr = &HalDev->offset;
-+ StatsTable4[2].StatPtr = &HalDev->interrupt;
-+ StatsTable4[3].StatPtr = &HalDev->debug;
-+ StatsTable4[4].StatPtr = &HalDev->Inst;
-+
-+ StatsTable3[0].StatPtr = &HalDev->ChData[0].RxBufSize;
-+ StatsTable3[1].StatPtr = &HalDev->ChData[0].RxBufferOffset;
-+ StatsTable3[2].StatPtr = &HalDev->ChData[0].RxNumBuffers;
-+ StatsTable3[3].StatPtr = &HalDev->ChData[0].RxServiceMax;
-+ StatsTable3[4].StatPtr = &HalDev->ChData[0].TxNumBuffers;
-+ StatsTable3[5].StatPtr = &HalDev->ChData[0].TxNumQueues;
-+ StatsTable3[6].StatPtr = &HalDev->ChData[0].TxServiceMax;
-+ StatsTable3[7].StatPtr = &HalDev->ChData[0].CpcsUU;
-+ StatsTable3[8].StatPtr = &HalDev->ChData[0].Gfc;
-+ StatsTable3[9].StatPtr = &HalDev->ChData[0].Clp;
-+ StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
-+ StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
-+ StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
-+ StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
-+ StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
-+ StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
-+ StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
-+ StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
-+ StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
-+ StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
-+
-+ /* update device state */
-+ HalDev->State = enInitialized;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(9))
-+ dbgConfigDump(HalDev);
-+#endif
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/*
-+ * Use this function to actually send after queuing multiple packets using
-+ * Send(). This is a debug only function that should be removed - it was
-+ * necessary to properly implement my loopback tests.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param Queue Queue number to kick.
-+ *
-+ * @return 0 OK, Non-Zero Not OK
-+ */
-+static int halKick(HAL_DEVICE *HalDev, int Queue)
-+ {
-+ int Ch;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]halKick(HalDev:%08x. Queue:%d)\n", (bit32u)HalDev, Queue);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ for (Ch = 0; Ch < 16; Ch ++)
-+ {
-+ if ((!HalDev->TxActive[Ch][Queue]) && (HalDev->TxActQueueHead[Ch][Queue] != 0))
-+ {
-+ *(pTX_DMA_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+Queue)=
-+ VirtToPhys(HalDev->TxActQueueHead[Ch][Queue]);
-+ HalDev->TxActive[Ch][Queue]=TRUE;
-+ }
-+ }
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/* +GSG 030305 For PITS #99
-+ * Alternate interrupt handler that uses the INT_VECTOR in order to
-+ * provide strict priority handling among channels, beginning with Ch 0.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param MoreWork (Output) When set to 1, indicates that there is more work to do.
-+ * Caller should ensure that the value pointed at is set to 0
-+ * prior to the call.
-+ * @return 0 OK, non-zero error.
-+ */
-+static int DeviceIntAlt(HAL_DEVICE *HalDev, int *MoreWork)
-+ {
-+ int tmp, Ch, WorkFlag;
-+ bit32u rc;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]DeviceIntAlt(HalDev:%08x, MoreWork:%08x)\n", (bit32u)HalDev, (bit32u)MoreWork);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Verify proper device state - important because a call prior to Open would
-+ result in a lockup */
-+ if (HalDev->State != enOpened)
-+ return(EC_AAL5|EC_FUNC_DEVICE_INT_ALT|EC_VAL_INVALID_STATE);
-+
-+ if ((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING)
-+ {
-+ /*printf("\015 %d RxQ",HalDev->RxActQueueCount[0]);
-+ HalDev->OsFunc->Control(HalDev->OsDev, enSIO_FLUSH, enNULL, 0); */
-+
-+ if (tmp&TXH_PEND)
-+ {
-+ /* decide which channel to service */
-+ Ch = (SAR_INTR_VECTOR(HalDev->dev_base) & TXH_PEND_INVEC);
-+
-+ rc = TxInt(HalDev,Ch,0,&WorkFlag);
-+ if (rc) return (rc);
-+
-+ if (WorkFlag == 1)
-+ *MoreWork = 1;
-+ }
-+
-+ if (tmp&TXL_PEND)
-+ {
-+ /* decide which channel to service */
-+ Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & TXL_PEND_INVEC) >> 4);
-+
-+ rc = TxInt(HalDev,Ch,1,&WorkFlag);
-+ if (rc) return (rc);
-+
-+ if (WorkFlag == 1)
-+ *MoreWork = 1;
-+ }
-+
-+ if (tmp&RX_PEND)
-+ {
-+ /* decide which channel to service */
-+ Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & RX_PEND_INVEC) >> 8);
-+
-+ rc = RxInt(HalDev,Ch,&WorkFlag);
-+ if (rc) return (rc);
-+
-+ if (WorkFlag == 1)
-+ *MoreWork = 1;
-+ }
-+
-+ if (tmp&STS_PEND)
-+ {
-+ /* GPR 2 code added for PITS 103 */
-+ /* determine interrupt source */
-+ Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & STS_PEND_INVEC) >> 12);
-+
-+ /* only if this is GPR 2 interrupt do we take action */
-+ if (Ch == 26)
-+ {
-+ /* pass loopback result back to OS */
-+ HalDev->OsFunc->Control(HalDev->OsDev, "OamLbResult", "Set",
-+ (bit32u *)pSAR_PDSP_OAM_LB_RESULT_REG(HalDev->dev_base));
-+ }
-+
-+ /* clear the interrupt */
-+ SAR_STATUS_CLR_REG(HalDev->dev_base) |= 0x04000000;
-+ }
-+
-+ if (tmp&AAL2_PEND)
-+ {
-+ /* no action defined */
-+ }
-+
-+ SAR_INTR_VECTOR(HalDev->dev_base) = 0;
-+ }
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/*
-+ * Called to service a module interrupt. This function determines
-+ * what type of interrupt occurred and dispatches the correct handler.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param MoreWork (Output) When set to 1, indicates that there is more work to do.
-+ * Caller should ensure that the value pointed at is set to 0
-+ * prior to the call.
-+ * @return 0 OK, non-zero error.
-+ */
-+static int DeviceInt(HAL_DEVICE *HalDev, int *MoreWork)
-+ {
-+ /*static int NextRxCh=0;
-+ static int NextTxCh[2]={0,0};*/
-+
-+ int tmp, Ch, FirstCh, WorkFlag;
-+ int NextTxLCh, NextTxHCh, NextRxCh;
-+ bit32u rc;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]DeviceInt(HalDev:%08x, MoreWork:%08x)\n", (bit32u)HalDev, (bit32u)MoreWork);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Verify proper device state - important because a call prior to Open would
-+ result in a lockup */
-+ if (HalDev->State != enOpened)
-+ return(EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_INVALID_STATE);
-+
-+ NextTxHCh = HalDev->NextTxCh[0];
-+ NextTxLCh = HalDev->NextTxCh[1];
-+ NextRxCh = HalDev->NextRxCh;
-+
-+ /* service interrupts while there is more work to do */
-+ /*while (((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING) && (TotalPkts < 500))*/
-+ if ((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING)
-+ {
-+ /*printf("\015 %d RxQ",HalDev->RxActQueueCount[0]);
-+ HalDev->OsFunc->Control(HalDev->OsDev, enSIO_FLUSH, enNULL, 0); */
-+
-+ if (tmp&TXH_PEND)
-+ {
-+ /* decide which channel to service */
-+ FirstCh = NextTxHCh;
-+ while (1)
-+ {
-+ Ch = NextTxHCh++;
-+ if (NextTxHCh == 16)
-+ NextTxHCh = 0;
-+ if (SAR_TX_MASKED_STATUS(HalDev->dev_base) & (1<<Ch))
-+ break;
-+ if (FirstCh == NextTxHCh)
-+ {
-+ /* we checked every channel and still haven't found anything to do */
-+ return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_TXH_WORK_TO_DO);
-+ }
-+ }
-+
-+ rc = TxInt(HalDev,Ch,0,&WorkFlag);
-+ if (rc) return (rc);
-+
-+ if (WorkFlag == 1)
-+ *MoreWork = 1;
-+ }
-+
-+ if (tmp&TXL_PEND)
-+ {
-+ /* decide which channel to service */
-+ FirstCh = NextTxLCh;
-+ while (1)
-+ {
-+ Ch = NextTxLCh++;
-+ if (NextTxLCh == 16)
-+ NextTxLCh = 0;
-+ if (SAR_TX_MASKED_STATUS(HalDev->dev_base) & (1<<(Ch+16)))
-+ break;
-+ if (FirstCh == NextTxLCh)
-+ {
-+ /* we checked every channel and still haven't found anything to do */
-+ return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_TXL_WORK_TO_DO);
-+ }
-+ }
-+
-+ rc = TxInt(HalDev,Ch,1,&WorkFlag);
-+ if (rc) return (rc);
-+
-+ if (WorkFlag == 1)
-+ *MoreWork = 1;
-+ }
-+
-+ if (tmp&RX_PEND)
-+ {
-+ FirstCh = NextRxCh;
-+ while (1)
-+ {
-+ Ch = NextRxCh++;
-+ if (NextRxCh == 16)
-+ NextRxCh = 0;
-+ if (SAR_RX_MASKED_STATUS(HalDev->dev_base) & (1 << Ch))
-+ break; /* found a channel to service */
-+ if (FirstCh == NextRxCh)
-+ {
-+ /* we checked every channel and still haven't found anything to do */
-+ return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_RX_WORK_TO_DO);
-+ }
-+ }
-+
-+ rc = RxInt(HalDev,Ch, &WorkFlag);
-+ if (rc) return (rc);
-+
-+ if (WorkFlag == 1)
-+ *MoreWork = 1;
-+ }
-+
-+ if (tmp&STS_PEND)
-+ {
-+ /* +GSG 030305 */
-+ /* GPR 2 code added for PITS 103 */
-+ /* determine interrupt source */
-+ Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & STS_PEND_INVEC) >> 12);
-+
-+ /* only if this is GPR 2 interrupt do we take action */
-+ if (Ch == 26)
-+ {
-+ /* pass loopback result back to OS */
-+ HalDev->OsFunc->Control(HalDev->OsDev, "OamLbResult", "Set",
-+ (bit32u *)pSAR_PDSP_OAM_LB_RESULT_REG(HalDev->dev_base));
-+ }
-+
-+ /* clear the interrupt */
-+ SAR_STATUS_CLR_REG(HalDev->dev_base) |= 0x04000000;
-+ }
-+
-+ if (tmp&AAL2_PEND)
-+ {
-+ /* no action defined */
-+ }
-+
-+ SAR_INTR_VECTOR(HalDev->dev_base) = 0;
-+ }
-+
-+ HalDev->NextTxCh[0] = NextTxHCh;
-+ HalDev->NextTxCh[1] = NextTxLCh;
-+ HalDev->NextRxCh = NextRxCh;
-+
-+ /* This must be done by the upper layer */
-+ /* SAR_EOI(HalDev->dev_base) = 0; */
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * This function starts the operation of the CPHAL device. It takes the device
-+ * out of reset, and calls @c IsrRegister(). This function should be called after
-+ * calling the @c Init() function.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return EC_NO_ERRORS (ok).<BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ * @ref EC_VAL_KEY_NOT_FOUND "EC_VAL_KEY_NOT_FOUND"<BR>
-+ * @ref EC_VAL_FIRMWARE_TOO_LARGE "EC_VAL_FIRMWARE_TOO_LARGE"<BR>
-+ * @ref EC_VAL_PDSP_LOAD_FAIL "EC_VAL_PDSP_LOAD_FAIL"<BR>
-+ * @ref EC_VAL_RX_STATE_RAM_NOT_CLEARED "EC_VAL_RX_STATE_RAM_NOT_CLEARED"<BR>
-+ * @ref EC_VAL_TX_STATE_RAM_NOT_CLEARED "EC_VAL_TX_STATE_RAM_NOT_CLEARED"<BR>
-+ * @ref EC_VAL_TCB_MALLOC_FAILED "EC_VAL_TCB_MALLOC_FAILED"<BR>
-+ * @ref EC_VAL_RCB_MALLOC_FAILED "EC_VAL_RCB_MALLOC_FAILED"<BR>
-+ * @ref EC_VAL_RX_BUFFER_MALLOC_FAILED "EC_VAL_RX_BUFFER_MALLOC_FAILED"<BR>
-+ * @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
-+ */
-+static int halOpen(HAL_DEVICE *HalDev)
-+ {
-+ int i,Ret;
-+ bit32 SarBase = HalDev->dev_base;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]halOpen(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Verify proper device state */
-+ if (HalDev->State < enInitialized)
-+ return (EC_AAL5|EC_FUNC_OPEN|EC_VAL_INVALID_STATE);
-+
-+ /* Open the SAR (this brings the whole device out of reset */
-+ Ret = HalDev->SarFunc->Open(HalDev->SarDev); /* ~GSG 030410 */
-+ if (Ret) /* +GSG 030410 */
-+ return (Ret); /* +GSG 030410 */
-+
-+ /* Change device state */
-+ HalDev->State = enOpened;
-+
-+
-+#ifdef __CPHAL_DEBUG
-+ /* print out the version information */
-+ if (DBG(7))
-+ {
-+ dbgPrintf("[aal5 halOpen()]Module ID(AAL5-CPSAR):%d, Version:%2d.%02d\n",
-+ (SAR_ID_REG(SarBase)&0xffff0000)>>16,
-+ (SAR_ID_REG(SarBase)&0xff00)>>8,
-+ SAR_ID_REG(SarBase)&0xff);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* GREG 11/1/02: The State RAM clearing code was previously in cpsar.c,
-+ directly after device reset. I moved it here because I believe it is
-+ AAL5 specific code. Also the MAX_CHAN was set to 19 in cpsar.c, which
-+ would have caused this code to clear too much memory! */
-+
-+ /* NOTE: State RAM must be cleared prior to initializing the PDSP!! */
-+
-+ /* GSG 030416: Removed all of this. All PDSP State RAM is cleared
-+ in CPSAR Open(). On Close(), all channels are torndown, thus all
-+ AAL5 channel state RAM is cleared. */
-+
-+ /* Clear Rx State RAM */
-+ /*for (i=0; i<NUM_AAL5_CHAN; i++)
-+ for (j=0; j<NUM_RX_STATE_WORDS; j++)
-+ *(pRX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) = 0; */
-+
-+ /* Check that Rx DMA State RAM was cleared */
-+ /*for (i=0; i<NUM_AAL5_CHAN; i++)
-+ for (j=0; j<NUM_RX_STATE_WORDS; j++)
-+ {
-+ if (*(pRX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) != 0)
-+ {
-+ return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_RX_STATE_RAM_NOT_CLEARED);
-+ }
-+ }*/
-+
-+ /* Clear Tx State RAM */
-+ /*for (i=0; i<NUM_AAL5_CHAN; i++)
-+ for (j=0; j<NUM_TX_STATE_WORDS; j++)
-+ {
-+ *(pTX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) = 0;
-+ }*/
-+
-+ /* Check that Tx DMA State RAM was cleared */
-+ /*for (i=0; i<NUM_AAL5_CHAN; i++)
-+ for (j=0; j<NUM_TX_STATE_WORDS; j++)
-+ {
-+ if (*(pTX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) != 0)
-+ {
-+ return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_TX_STATE_RAM_NOT_CLEARED);
-+ }
-+ }*/
-+
-+ /* GSG +030523 Malloc space for the Rx fraglist */
-+ HalDev->fraglist = HalDev->OsFunc->Malloc(HalDev->MaxFrags * sizeof(FRAGLIST));
-+
-+ /* For any channels that have been pre-initialized, set them up now */
-+ for (i=0; i<NUM_AAL5_CHAN; i++)
-+ {
-+ if ((HalDev->ChIsSetup[i][0]==TRUE) && (HalDev->ChIsOpen[i][0]==FALSE))
-+ {
-+ CHANNEL_INFO HalChn;
-+ HalChn.Channel = i;
-+ Ret = ChannelConfigApply(HalDev, &HalChn);
-+ if (Ret) return (Ret);
-+ }
-+ }
-+
-+ /* OAM code would be a candidate to go into ConfigApply */
-+
-+ /* Configure OAM Timer State Block */
-+ OamRateConfig(HalDev); /* +GSG 030416 */
-+
-+ /* Setup OAM Configuration Block */
-+ for (i=0; i<8; i++) /* ~GSG 030603 4->8 */
-+ {
-+ if (i < 4)
-+ *(pOAM_CONFIG_BLOCK_WORD_0(SarBase) + i) = HalDev->DeviceCPID[i];
-+ else
-+ *(pOAM_CONFIG_BLOCK_WORD_0(SarBase) + i) = HalDev->LBSourceLLID[i-4];
-+ }
-+
-+ /* Setup OAM Padding Block */
-+ for (i=0; i<12; i++)
-+ {
-+ *(pOAM_PADDING_BLOCK_WORD_0(SarBase) + i) = ((i==11)?0x6a6a0000:0x6a6a6a6a);
-+ }
-+
-+ /* Enable Tx CPPI DMA */
-+ TX_CPPI_CTL_REG(HalDev->dev_base) = 1;
-+
-+ /* Enable Rx CPPI DMA */
-+ RX_CPPI_CTL_REG(HalDev->dev_base) = 1;
-+
-+ /* +GSG 030306 */
-+ /* Fix for PITS 103 */
-+ /* Enable Host Interrupt for GPR 2 (OAM LB result register) */
-+ SAR_HOST_INT_EN_SET_REG(HalDev->dev_base) |= 0x04000000;
-+
-+ /* +GSG 030304 to fix PITS 99 (if block is new)*/
-+ if (HalDev->StrictPriority == 1)
-+ {
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(1))
-+ {
-+ dbgPrintf("[aal5->os]IsrRegister(OsDev:%08x, halIsr:%08x, Interrupt:%d)\n",
-+ (bit32u)HalDev->OsDev, (bit32u)DeviceIntAlt, HalDev->interrupt);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* "register" the interrupt handler */
-+ HalDev->OsFunc->IsrRegister(HalDev->OsDev, DeviceIntAlt, HalDev->interrupt);
-+ }
-+ else /* +GSG 030306 */
-+ { /* +GSG 030306 */
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(1))
-+ {
-+ dbgPrintf("[aal5->os]IsrRegister(OsDev:%08x, halIsr:%08x, Interrupt:%d)\n",
-+ (bit32u)HalDev->OsDev, (bit32u)DeviceInt, HalDev->interrupt);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* "register" the interrupt handler */
-+ HalDev->OsFunc->IsrRegister(HalDev->OsDev, DeviceInt, HalDev->interrupt);
-+ } /* +GSG 030306 */
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * Called to retrigger the interrupt mechanism after packets have been
-+ * processed. Call this function when the HalISR function indicates that
-+ * there is no more work to do. Proper use of this function will guarantee
-+ * that interrupts are never missed.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return EC_NO_ERRORS (ok). <BR>
-+ */
-+static int halPacketProcessEnd(HAL_DEVICE *HalDev)
-+ {
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]halPacketProcessEnd(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ SAR_EOI(HalDev->dev_base) = 0;
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * This function probes for the instance of the CPHAL module. It will call
-+ * the OS function @c DeviceFindInfo() to get the information required.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return EC_NO_ERRORS (ok). <BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ * @ref EC_VAL_DEVICE_NOT_FOUND "EC_VAL_DEVICE_NOT_FOUND"<BR>
-+ */
-+static int halProbe(HAL_DEVICE *HalDev)
-+ {
-+ int Ret;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]halProbe(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Verify hardware state is "enConnected */
-+ if (HalDev->State != enConnected)
-+ return (EC_AAL5|EC_FUNC_PROBE|EC_VAL_INVALID_STATE);
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(1))
-+ {
-+ dbgPrintf("[aal5->os]DeviceFindInfo(Inst:%d, DeviceName:%s, DeviceInfo:%08x)\n",
-+ HalDev->Inst, "aal5", (bit32u)&HalDev->DeviceInfo);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Attempt to find the device information */
-+ Ret = HalDev->OsFunc->DeviceFindInfo(HalDev->Inst, "aal5", &HalDev->DeviceInfo);
-+ if (Ret)
-+ return(EC_AAL5|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND);
-+
-+ /* Call Probe for supporting CPSAR layer */
-+ Ret = HalDev->SarFunc->Probe(HalDev->SarDev);
-+ if (Ret)
-+ return(Ret);
-+
-+ /* Set device state to DevFound */
-+ HalDev->State = enDevFound;
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * This function shuts down the CPHAL module completely. The caller must call
-+ * Close() to put the device in reset prior shutting down. This call will free
-+ * the HalDev and the HAL function pointer structure, effectively ending
-+ * communications between the driver and the CPHAL. Further use of the module
-+ * must be initiated by a call to xxxInitModule(), which starts the entire process
-+ * over again.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return EC_NO_ERRORS (ok). <BR>
-+ * Possible Error Codes:<BR>
-+ * Any error code from halClose().<BR>
-+ */
-+static int halShutdown(HAL_DEVICE *HalDev)
-+ {
-+ int Ch, Queue; /*GSG+030514*/
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]halShutdown(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Verify proper device state */
-+ if (HalDev->State == enOpened)
-+ halClose(HalDev, 3); /*GSG+030429*/
-+
-+ /* Buffer/descriptor resources may still need to be freed if a Close
-+ Mode 1 was performed prior to Shutdown - clean up here */ /*GSG+030514*/
-+ for (Ch=0; Ch<NUM_AAL5_CHAN; Ch++)
-+ {
-+ if (HalDev->RcbStart[Ch] != 0)
-+ FreeRx(HalDev,Ch);
-+
-+ for(Queue=0; Queue<MAX_QUEUE; Queue++)
-+ {
-+ if (HalDev->TcbStart[Ch][Queue] != 0)
-+ FreeTx(HalDev,Ch,Queue);
-+ }
-+ }
-+
-+ /* shutdown the CPSAR layer */
-+ HalDev->SarFunc->Shutdown(HalDev->SarDev);
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(6))
-+ {
-+ dbgPrintf(" [aal5 halShutdown()]Free AAL5 function pointers\n");
-+ osfuncSioFlush();
-+ }
-+ if (DBG(1)||DBG(3))
-+ {
-+ dbgPrintf("[aal5->os]Free(MemPtr:%08x)\n", (bit32u)HalDev->HalFuncPtr);
-+ osfuncSioFlush();
-+ }
-+#endif
-+ /* free the HalFunc */
-+ HalDev->OsFunc->Free(HalDev->HalFuncPtr);
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(6))
-+ {
-+ dbgPrintf(" [aal5 halShutdown]Free HalDev\n");
-+ osfuncSioFlush();
-+ }
-+ if (DBG(1)||DBG(3))
-+ {
-+ dbgPrintf("[aal5->os]Free(MemPtr:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+ /* free the HAL device */
-+ HalDev->OsFunc->FreeDev(HalDev);
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * Used to perform regular checks on the device. This function should be
-+ * called at a regular interval specified by the @c Tick parameter.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return EC_NO_ERRORS (ok).<BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ */
-+static int halTick(HAL_DEVICE *HalDev)
-+ {
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[aal5]halTick(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ if (HalDev->State != enOpened)
-+ return(EC_AAL5|EC_FUNC_TICK|EC_VAL_INVALID_STATE);
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ *
-+ * This function will:
-+ * -# allocate a HalDev that will be used by the OS for future communications with the device
-+ * -# save OsDev for use when calling OS functions
-+ * -# allocate and populate HalFunc with the addresses of CPHAL functions.
-+ * -# check OsFuncSize to see if it meets the minimum requirement.
-+ * -# return the size of the HAL_FUNCTIONS structure through the HalFuncSize pointer. The OS
-+ * should check this value to ensure that the HAL meets its minimum requirement.
-+ *
-+ * Version checking between the OS and the CPHAL is done using the OsFuncSize and
-+ * HalFuncSize. Future versions of the CPHAL may add new functions to either
-+ * HAL_FUNCTIONS or OS_FUNCTIONS, but will never remove functionality. This enables
-+ * both the HAL and OS to check the size of the function structure to ensure that
-+ * the current OS and CPHAL are compatible.
-+ *
-+ * Note: This is the only function exported by a CPHAL module.
-+ *
-+ * Please refer to the section "@ref hal_init" for example code.
-+ *
-+ * @param HalDev Pointer to pointer to CPHAL module information. This will
-+ * be used by the OS when communicating to this module via
-+ * CPHAL. Allocated during the call.
-+ * @param OsDev Pointer to OS device information. This will be saved by
-+ * the CPHAL and returned to the OS when required.
-+ * @param HalFunc Pointer to pointer to structure containing function pointers for all CPHAL
-+ * interfaces. Allocated during the call.
-+ * @param OsFunc Pointer to structure containing function pointers for all OS
-+ * provided interfaces. Must be allocated by OS prior to call.
-+ * @param OsFuncSize Size of OS_FUNCTIONS structure.
-+ * @param HalFuncSize Pointer to the size of the HAL_FUNCTIONS structure.
-+ * @param Inst The instance number of the module to initialize. (start at
-+ * 0).
-+ *
-+ * @return EC_NO_ERRORS (ok). <BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_OS_VERSION_NOT_SUPPORTED "EC_VAL_OS_VERSION_NOT_SUPPORTED"<BR>
-+ * @ref EC_VAL_MALLOC_DEV_FAILED "EC_VAL_MALLOC_DEV_FAILED"<BR>
-+ * @ref EC_VAL_MALLOC_FAILED "EC_VAL_MALLOC_FAILED"<BR>
-+ */
-+int xxxInitModule(HAL_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ HAL_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+
-+int cpaal5InitModule(HAL_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ HAL_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst)
-+ {
-+ int rc, SarFuncSize;
-+ HAL_DEVICE *HalPtr;
-+ HAL_FUNCTIONS *HalFuncPtr;
-+
-+ /* NEW CODE */
-+ if (OsFuncSize < sizeof(OS_FUNCTIONS))
-+ return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_OS_VERSION_NOT_SUPPORTED);
-+
-+ HalPtr = (HAL_DEVICE *) OsFunc->MallocDev(sizeof(HAL_DEVICE));
-+ if (!HalPtr)
-+ return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED);
-+
-+ HalFuncPtr = (HAL_FUNCTIONS *) OsFunc->Malloc(sizeof(HAL_FUNCTIONS));
-+ if (!HalFuncPtr)
-+ return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED);
-+
-+ /* Initialize the size of hal functions */
-+ *HalFuncSize = sizeof (HAL_FUNCTIONS);
-+
-+ /* clear the device structure */
-+ OsFunc->Memset(HalPtr, 0, sizeof(HAL_DEVICE));
-+
-+ /* clear the function pointers */
-+ OsFunc->Memset(HalFuncPtr, 0, sizeof(HAL_FUNCTIONS));
-+
-+ /* initialize the HAL_DEVICE structure */
-+ HalPtr->OsDev = OsDev;
-+ /*HalPtr->OsOpen = OsDev;*/
-+ HalPtr->Inst = Inst;
-+ HalPtr->OsFunc = OsFunc;
-+
-+ /* Supply pointers for the CPHAL API functions */
-+ HalFuncPtr->RxReturn = halRxReturn;
-+ HalFuncPtr->Init = halInit;
-+ HalFuncPtr->Close = halClose;
-+ HalFuncPtr->Send = halSend;
-+ HalFuncPtr->ChannelSetup = halChannelSetup;
-+ HalFuncPtr->ChannelTeardown = halChannelTeardown;
-+ HalFuncPtr->Open = halOpen;
-+ HalFuncPtr->Kick = halKick;
-+ HalFuncPtr->RegAccess = halRegAccess;
-+ HalFuncPtr->Probe = halProbe;
-+ HalFuncPtr->Control = halControl;
-+ HalFuncPtr->Tick = halTick;
-+ HalFuncPtr->Shutdown = halShutdown;
-+ HalFuncPtr->OamFuncConfig = halOamFuncConfig; /* +GSG 030306 */
-+ HalFuncPtr->OamLoopbackConfig = halOamLoopbackConfig; /* ~GSG 030416 */
-+
-+ /* Temporary */
-+ /*HalFuncPtr->StatsGetOld = StatsGet;*/
-+ HalFuncPtr->PacketProcessEnd = halPacketProcessEnd;
-+
-+ /* Now, AAL5 must connect to the CPSAR layer */
-+
-+ /* Attach to SAR HAL Functions */
-+ /*
-+ cpsarInitModule(NULL, NULL, 0, NULL, &SarFuncSize, Inst);
-+
-+ if (SarFuncSize!=sizeof(CPSAR_FUNCTIONS))
-+ return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_CPSAR_VERSION_NOT_SUPPORTED);
-+
-+ HalPtr->SarFunc = (CPSAR_FUNCTIONS *) OsFunc->Malloc(SarFuncSize);
-+ */
-+
-+ rc = cpsarInitModule(&HalPtr->SarDev, OsDev, &HalPtr->SarFunc, OsFunc, sizeof(OS_FUNCTIONS), &SarFuncSize, Inst);
-+
-+ /* pass back the error value from the CPSAR layer if necessary */
-+ if (rc)
-+ return(rc);
-+
-+ /*
-+ if (!HalPtr->SarDev)
-+ return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_NULL_CPSAR_DEV);
-+ */
-+
-+ /* Initialize the hardware state */
-+ HalPtr->State = enConnected;
-+
-+ /* keep a reference to HalFuncPtr so I can free it later */
-+ HalPtr->HalFuncPtr = HalFuncPtr;
-+
-+ /* pass the HalPtr back to the caller */
-+ *HalDev = HalPtr;
-+ *HalFunc = HalFuncPtr;
-+
-+ return(EC_NO_ERRORS);
-+ }
-diff -urN linux.old/drivers/atm/sangam_atm/aal5sar.h linux.dev/drivers/atm/sangam_atm/aal5sar.h
---- linux.old/drivers/atm/sangam_atm/aal5sar.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/aal5sar.h 2005-08-23 04:46:50.080846280 +0200
-@@ -0,0 +1,198 @@
-+/**@file************************************************************************
-+ * TNETDxxxx Software Support
-+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ * FILE: aal5sar.h
-+ *
-+ * DESCRIPTION:
-+ * This file contains data structure definitions for the AAL5 HAL SAR.
-+ *
-+ * HISTORY:
-+ * 28Feb02 Greg 1.00 Original Version created.
-+ * 06Mar02 Greg 1.01 Documented structures.
-+ * 18Jul02 Greg 1.02 Major reorganization
-+ *
-+ *****************************************************************************/
-+#ifndef _INC_AAL5SAR
-+#define _INC_AAL5SAR
-+
-+/** \namespace AAL5_Version
-+This documents version 01.06.06 of the AAL5 CPHAL.
-+*/
-+const char *pszVersion_CPAAL5="CPAAL5 01.06.06 "__DATE__" "__TIME__;
-+
-+#include "cpsar_cpaal5.h"
-+
-+#define NUM_AAL5_CHAN 16
-+#define MAX_AAL5_CHAN 15
-+#define MAX_QUEUE 2
-+#define MAX_DIRECTION 2
-+
-+#define PKT_TYPE_AAL5 0 /* +GSG 030508 */
-+#define PKT_TYPE_NULL 1 /* +GSG 030508 */
-+#define PKT_TYPE_OAM 2 /* +GSG 030508 */
-+#define PKT_TYPE_TRANS 3 /* +GSG 030508 */
-+#define ATM_HEADER_SIZE 4 /* +GSG 030508 */
-+
-+/*
-+ * HAL Default Parameter Values
-+ */
-+#define CFG_TX_NUM_BUFS {256,256,256,256,256,256,256,256, 256,256,256,256,256,256,256,256}
-+#define CFG_RX_NUM_BUFS {256,256,256,256,256,256,256,256, 256,256,256,256,256,256,256,256}
-+#define CFG_RX_BUF_SIZE {1518,1518,1518,1518,1518,1518,1518,1518, 1518,1518,1518,1518,1518,1518,1518,1518}
-+#define CFG_RX_BUF_OFFSET {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_TX_NUM_QUEUES {1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1}
-+#define CFG_CPCS_UU {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_DA_MASK {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_PRIORITY {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_PKT_TYPE {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_VCI {100,101,102,103,104,105,106,107, 108,109,110,111,112,113,114,115}
-+#define CFG_VPI {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_CELL_RATE {0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4, 0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4}
-+#define CFG_QOS_TYPE {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_MBS {8,8,8,8,8,8,8,8, 8,8,8,8,8,8,8,8}
-+#define CFG_PCR {1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1}
-+#define CFG_GFC {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_CLP {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_PTI {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0}
-+#define CFG_RX_MAX_SERVICE {170,170,170,170,170,170,170,170, 170,170,170,170,170,170,170,170}
-+#define CFG_TX_MAX_SERVICE {170,170,170,170,170,170,170,170, 170,170,170,170,170,170,170,170}
-+
-+static int cfg_tx_num_bufs[NUM_AAL5_CHAN] = CFG_TX_NUM_BUFS;
-+static int cfg_rx_num_bufs[NUM_AAL5_CHAN] = CFG_RX_NUM_BUFS;
-+static int cfg_rx_buf_size[NUM_AAL5_CHAN] = CFG_RX_BUF_SIZE;
-+static int cfg_rx_buf_offset[NUM_AAL5_CHAN] = CFG_RX_BUF_OFFSET;
-+static int cfg_tx_num_queues[NUM_AAL5_CHAN] = CFG_TX_NUM_QUEUES;
-+static bit32u cfg_cpcs_uu[NUM_AAL5_CHAN] = CFG_CPCS_UU;
-+static int cfg_da_mask[NUM_AAL5_CHAN] = CFG_DA_MASK;
-+static int cfg_priority[NUM_AAL5_CHAN] = CFG_PRIORITY;
-+static int cfg_pkt_type[NUM_AAL5_CHAN] = CFG_PKT_TYPE;
-+static int cfg_vci[NUM_AAL5_CHAN] = CFG_VCI;
-+static int cfg_vpi[NUM_AAL5_CHAN] = CFG_VPI;
-+static bit32u cfg_cell_rate[NUM_AAL5_CHAN] = CFG_CELL_RATE;
-+static int cfg_qos_type[NUM_AAL5_CHAN] = CFG_QOS_TYPE;
-+static int cfg_mbs[NUM_AAL5_CHAN] = CFG_MBS;
-+static int cfg_pcr[NUM_AAL5_CHAN] = CFG_PCR;
-+static int cfg_gfc[NUM_AAL5_CHAN] = CFG_GFC;
-+static int cfg_clp[NUM_AAL5_CHAN] = CFG_CLP;
-+static int cfg_pti[NUM_AAL5_CHAN] = CFG_PTI;
-+static int cfg_rx_max_service[NUM_AAL5_CHAN]= CFG_RX_MAX_SERVICE;
-+static int cfg_tx_max_service[NUM_AAL5_CHAN]= CFG_TX_MAX_SERVICE;
-+static char *channel_names[] = CHANNEL_NAMES;
-+
-+/*
-+ * The HAL_FUNCTIONS struct defines the function pointers for all HAL functions
-+ * accessible to upper layer software. It is populated by calling
-+ * halInitModules().
-+ *
-+ * Note that this list is still under definition.
-+ */
-+
-+/*
-+ * This is the data structure for a transmit buffer descriptor. The first
-+ * four 32-bit words of the BD represent the CPPI 3.0 defined buffer descriptor
-+ * words. The other words are SAR/HAL implementation specific.
-+ */
-+typedef struct
-+ {
-+ bit32 HNext; /**< Hardware's pointer to next buffer descriptor */
-+ bit32 BufPtr; /**< Pointer to the data buffer */
-+ bit32 Off_BLen; /**< Contains buffer offset and buffer length */
-+ bit32 mode; /**< SOP, EOP, Ownership, EOQ, Teardown Complete bits */
-+ bit32 AtmHeader; /**< Atm Header to be used for each fragment */
-+ bit32 Word5; /**< General control information for the packet */
-+ bit32 Res6;
-+ bit32 Res7;
-+ void *Next;
-+ void *OsInfo;
-+#ifdef __CPHAL_DEBUG
-+ bit32 DbgSop;
-+ bit32 DbgData;
-+ bit32 DbgFraglist;
-+#endif
-+ void *Eop;
-+ }HAL_TCB;
-+
-+/*
-+ * This is the data structure for a receive buffer descriptor. The first
-+ * six 32-bit words of the BD represent the CPPI 3.0 defined buffer descriptor
-+ * words. The other words are HAL implementation specific.
-+ */
-+typedef volatile struct hal_private
-+ {
-+ bit32 HNext; /**< Hardware's pointer to next buffer descriptor */
-+ bit32 BufPtr; /**< Pointer to the data buffer */
-+ bit32 Off_BLen; /**< Contains buffer offset and buffer length */
-+ bit32 mode; /**< SOP, EOP, Ownership, EOQ, Teardown, Q Starv, Length */
-+ bit32 AtmHeader;
-+ bit32 UuCpi;
-+ bit32 Res6;
-+ bit32 Res7;
-+ void *DatPtr;
-+ void *Next;
-+ void *OsInfo;
-+ void *Eop;
-+ bit32 FragCount;
-+ bit32 Ch;
-+ HAL_DEVICE *HalDev;
-+ }HAL_RCB;
-+
-+
-+#define MAX_NEEDS 512 /*MJH+030409*/
-+/*
-+ * This is the data structure for a generic HAL device. It contains all device
-+ * specific data for a single instance of that device. This includes Rx/Tx
-+ * buffer queues, device base address, reset bit, and other information.
-+ */
-+typedef struct hal_device
-+ {
-+ HAL_RCB *RcbPool[NUM_AAL5_CHAN];
-+ bit32u rxbufseq;
-+ bit32 RxActQueueCount[NUM_AAL5_CHAN];
-+ HAL_RCB *RxActQueueHead[NUM_AAL5_CHAN];
-+ HAL_RCB *RxActQueueTail[NUM_AAL5_CHAN];
-+ bit32 RxActive[NUM_AAL5_CHAN];
-+ bit32 dev_base;
-+ HAL_TCB *TcbPool[NUM_AAL5_CHAN][MAX_QUEUE];
-+ bit32 offset;
-+ bit32 TxActQueueCount[NUM_AAL5_CHAN][MAX_QUEUE];
-+ HAL_TCB *TxActQueueHead[NUM_AAL5_CHAN][MAX_QUEUE];
-+ HAL_TCB *TxActQueueTail[NUM_AAL5_CHAN][MAX_QUEUE];
-+ bit32 TxActive[NUM_AAL5_CHAN][MAX_QUEUE];
-+ bit32 TxTeardownPending[NUM_AAL5_CHAN];
-+ bit32 RxTeardownPending[NUM_AAL5_CHAN];
-+ bit32 ChIsOpen[NUM_AAL5_CHAN][MAX_DIRECTION];
-+ bit32 ChIsSetup[NUM_AAL5_CHAN][MAX_DIRECTION];
-+ bit32 interrupt;
-+ bit32 debug;
-+ OS_DEVICE *OsDev;
-+ OS_FUNCTIONS *OsFunc;
-+ CPSAR_FUNCTIONS *SarFunc;
-+ CPSAR_DEVICE *SarDev;
-+ /*void *OsOpen;*/
-+ /*FRAGLIST fraglist[MAX_FRAG];*/
-+ FRAGLIST *fraglist;
-+ char *TcbStart[NUM_AAL5_CHAN][MAX_QUEUE];
-+ char *RcbStart[NUM_AAL5_CHAN];
-+ /*bit32 RcbSize[NUM_AAL5_CHAN];*/
-+ bit32 InRxInt[NUM_AAL5_CHAN];
-+ STAT_INFO Stats;
-+ bit32 Inst;
-+ bit32u DeviceCPID[4];
-+ bit32u LBSourceLLID[4];
-+ CHANNEL_INFO ChData[NUM_AAL5_CHAN];
-+ DEVICE_STATE State;
-+ char *DeviceInfo;
-+ HAL_FUNCTIONS *HalFuncPtr;
-+ int NextRxCh;
-+ int NextTxCh[2];
-+ int StrictPriority; /* +GSG 030304 */
-+ bit32u NeedsCount; /*MJH+030409*/
-+ HAL_RECEIVEINFO *Needs[MAX_NEEDS]; /*MJH+030409*/
-+ bit32u SarFrequency; /* +GSG 030416 */
-+ int MaxFrags;
-+ bit32u TurboDslErrors;
-+ bit32u OamLbTimeout;
-+ }HALDEVICE;
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.c linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.c
---- linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.c 2005-08-23 04:46:50.081846128 +0200
-@@ -0,0 +1,728 @@
-+#ifndef _INC_CPCOMMON_C
-+#define _INC_CPCOMMON_C
-+
-+#ifdef _CPHAL_CPMAC
-+#include "cpremap_cpmac.c"
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+#include "cpremap_cpaal5.c"
-+#endif
-+
-+#ifdef _CPHAL_CPSAR
-+#include "cpremap_cpsar.c"
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+#include "cpremap_cpaal2.c"
-+#endif
-+
-+/**
-+@defgroup Common_Config_Params Common Configuration Parameters
-+
-+This section documents the configuration parameters that are valid across
-+all CPHAL devices.
-+@{
-+*/
-+/** This is the debug level. The field is bit defined, such that the user
-+should set to 1 all the bits corresponding to desired debug outputs. The following
-+are the meanings for each debug bit:
-+- bit0 (LSB): CPHAL Function Trace
-+- b1 : OS Function call trace
-+- b2 : Critical section entry/exit
-+- b3 : Memory allocation/destruction
-+- b4 : Detailed information in Rx path
-+- b5 : Detailed information in Tx path
-+- b6 : Extended error information
-+- b7 : General info
-+*/
-+static const char pszDebug[] = "debug";
-+/** CPU Frequency. */
-+/*static const char pszCpuFreq[] = "CpuFreq";*/ /*MJH-030403*/
-+/** Base address for the module. */
-+static const char pszBase[] = "base";
-+/** Reset bit for the module. */
-+static const char pszResetBit[] = "reset_bit";
-+/** Reset base address for the module. */
-+static const char pszResetBase[] = "ResetBase";
-+/** Interrupt line for the module. */
-+static const char pszIntLine[] = "int_line";
-+/** VLYNQ offset for the module. Disregard if not using VLYNQ. */
-+static const char pszOffset[] = "offset";
-+/** The OS may "Get" this parameter, which is a pointer
-+ to a character string that indicates the version of CPHAL. */
-+static const char pszVer[] = "Version";
-+/*@}*/
-+
-+/**
-+@defgroup Common_Control_Params Common Keys for [os]Control()
-+
-+This section documents the keys used with the OS @c Control() interface that
-+are required by CPHAL devices.
-+
-+@{
-+*/
-+/** Used to wait for an integer number of clock ticks, given as an integer
-+ pointer in the @p Value parameter. No actions are defined. */
-+static const char pszSleep[] = "Sleep";
-+/** Requests the OS to flush it's IO buffers. No actions are defined. */
-+static const char pszSioFlush[] = "SioFlush";
-+/*@}*/
-+
-+static const char pszStateChange[] = "StateChange";
-+static const char pszStatus[] = "Status";
-+
-+static const char pszGET[] = "Get";
-+static const char pszSET[] = "Set";
-+static const char pszCLEAR[] = "Clear";
-+static const char pszNULL[] = "";
-+static const char pszLocator[] = "Locator";
-+static const char pszOff[] = "Off";
-+static const char pszOn[] = "On";
-+static const char hcMaxFrags[] = "MaxFrags";
-+
-+#ifdef _CPHAL_CPMAC
-+
-+/* New method for string constants */
-+const char hcClear[] = "Clear";
-+const char hcGet[] = "Get";
-+const char hcSet[] = "Set";
-+
-+const char hcTick[] = "Tick";
-+
-+static const CONTROL_KEY KeyCommon[] =
-+ {
-+ {"" , enCommonStart},
-+ {pszStatus , enStatus},
-+ {pszOff , enOff},
-+ {pszOn , enOn},
-+ {pszDebug , enDebug},
-+ {hcCpuFrequency , enCpuFreq}, /*MJH~030403*/
-+ {"" , enCommonEnd}
-+ };
-+#endif
-+
-+/**
-+@defgroup Common_Statistics Statistics
-+
-+A broad array of module statistics is available. Statistics values are accessed
-+through the @c Control() interface of the CPHAL. There are 5 different levels
-+of statistics, each of which correspond to a unique set of data. Furthermore,
-+certain statistics data is indexed by using a channel number and Tx queue number.
-+The following is a brief description of each statistics level, along with the
-+indexes used for the level:
-+
-+- Level 0: Hardware Statistics (index with channel)
-+- Level 1: CPHAL Software Statistics (channel, queue)
-+- Level 2: CPHAL Flags (channel, queue)
-+- Level 3: CPHAL Channel Configuration (channel)
-+- Level 4: CPHAL General Configuration (no index)
-+
-+The caller requests statistics information by providing a Key string to the
-+@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]".
-+The only valid Action parameter for statistics usage is "Get".
-+
-+Code Examples:
-+@code
-+unsigned int *StatsData;
-+
-+# Get Level 0 stats for Channel 1
-+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
-+
-+# Get Level 2 stats for Channel 0, Queue 0
-+HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData);
-+
-+# Get Level 4 stats
-+HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData);
-+@endcode
-+
-+The information returned in the Value parameter of @c Control() is an
-+array of pointers to strings. The pointers are arranged in pairs.
-+The first pointer is a pointer to a name string for a particular statistic.
-+The next pointer is a pointer to a string containing the representation of
-+the integer statistic value corresponding to the first pointer. This is followed
-+by another pair of pointers, and so on, until a NULL pointer is encountered. The
-+following is example code for processing the statistics data. Note that the OS
-+is responsible for freeing the memory passed back through the Value parameter of
-+@c Control().
-+
-+@code
-+unsigned int *StatsData;
-+
-+# Get Level 0 stats for Channel 1
-+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
-+
-+# output Statistics data
-+PrintStats(StatsData);
-+
-+# the upper layer is responsible for freeing stats info
-+free(&StatsPtr);
-+
-+...
-+
-+void PrintStats(unsigned int *StatsPtr)
-+ {
-+ while(*StatsPtr)
-+ {
-+ printf("%20s:", (char *)*StatsPtr);
-+ StatsPtr++;
-+ printf("%11s\n", (char *)*StatsPtr);
-+ StatsPtr++;
-+ }
-+ MySioFlush();
-+ }
-+@endcode
-+
-+Within each statistics level, there are several statistics defined. The statistics that
-+are common to every CPPI module are listed below. In addition, each module may define
-+extra statistics in each level, which will be documented within the module-specific
-+documentation appendices.
-+
-+- Level 0 Statistics
-+ - All level 0 statistics are module-specific.
-+- Level 1 Statistics (CPHAL Software Statistics)
-+ - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only)
-+ - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes
-+transmitting the previous last packet in the queue (per channel and queue).
-+ - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the
-+reception of the previous last packet in the queue (per channel).
-+ - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue).
-+ - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel).
-+ - RxPacketsServiced: Number of received packets (per channel).
-+ - TxPacketsServiced: Number of transmitted packets (per channel and queue).
-+ - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel).
-+ - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue).
-+ - RxTotal: Total number of received packets, all channels.
-+ - TxTotal: Total number of transmitted packets, all channels and queues.
-+- Level 2 Statistics (CPHAL Flags)
-+ - RcbPool: Pointer to receive descriptor pool (per channel).
-+ - RxActQueueCount: Number of buffers currently available for receive (per channel).
-+ - RxActQueueHead: Pointer to first buffer in receive queue (per channel).
-+ - RxActQueueTail: Pointer to last buffer in receive queue (per channel).
-+ - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available).
-+ - RcbStart: Pointer to block of receive descriptors.
-+ - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise.
-+ - TcbPool: Pointer to transmit descriptor pool (per channel and queue).
-+ - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue).
-+ - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue).
-+ - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue).
-+ - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send).
-+ - TcbStart: Pointer to block of transmit descriptors.
-+ - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise.
-+- Level 3 Statistics (CPHAL Channel Configuration)
-+ - RxBufSize: Rx buffer size.
-+ - RxBufferOffset: Rx buffer offset.
-+ - RxNumBuffers: Number of Rx buffers.
-+ - RxServiceMax: Maximum number of receive packets to service at a time.
-+ - TxNumBuffers: Number of Tx buffer descriptors.
-+ - TxNumQueues: Number of Tx queues to use.
-+ - TxServiceMax: Maximum number of transmit packets to service at a time.
-+- Level 4 Statistics (CPHAL General Configuration)
-+ - Base Address: Base address of the module.
-+ - Offset (VLYNQ): VLYNQ relative module offset.
-+ - Interrupt Line: Interrupt number.
-+ - Debug: Debug flag, 1 to enable debug.
-+ - Inst: Instance number.
-+*/
-+
-+/*
-+ Data Type 0 = int display
-+ Data Type 1 = hex display
-+ Data Type 2 = channel structure, int display
-+ Data Type 3 = queue index and int display
-+ Data Type 4 = queue index and hex display
-+*/
-+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */
-+static STATS_TABLE StatsTable0[] =
-+ {
-+#ifdef _CPHAL_AAL5
-+ /* Name , Data Ptr, Data Type */
-+ {"Crc Errors", 0, 0},
-+ {"Len Errors", 0, 0},
-+ {"Abort Errors", 0, 0},
-+ {"Starv Errors", 0, 0}
-+#endif
-+#ifdef _CPHAL_CPMAC
-+ {"Rx Good Frames", 0, 0}
-+#endif
-+ };
-+
-+static STATS_TABLE StatsTable1[] =
-+ {
-+ /* Name , Data Ptr, Data Type */
-+ {"DmaLenErrors", 0, 0},
-+ {"TxMisQCnt", 0, 3},
-+ {"RxMisQCnt", 0, 0},
-+ {"TxEOQCnt", 0, 3},
-+ {"RxEOQCnt", 0, 0},
-+ {"RxPacketsServiced", 0, 0},
-+ {"TxPacketsServiced", 0, 3},
-+ {"RxMaxServiced", 0, 0},
-+ {"TxMaxServiced", 0, 3},
-+ {"RxTotal", 0, 0},
-+ {"TxTotal", 0, 0},
-+ };
-+
-+static STATS_TABLE StatsTable2[] =
-+ {
-+ /* Name , Data Ptr, Data Type */
-+ {"RcbPool", 0, 1},
-+ {"RxActQueueCount", 0, 0},
-+ {"RxActQueueHead", 0, 1},
-+ {"RxActQueueTail", 0, 1},
-+ {"RxActive", 0, 0},
-+ {"RcbStart", 0, 1},
-+ {"RxTeardownPending", 0, 0},
-+ {"TcbPool", 0, 4},
-+ {"TxActQueueCount", 0, 3},
-+ {"TxActQueueHead", 0, 4},
-+ {"TxActQueueTail", 0, 4},
-+ {"TxActive", 0, 3},
-+ {"TcbStart", 0, 4},
-+ {"TxTeardownPending", 0, 0}
-+ };
-+
-+static STATS_TABLE StatsTable3[] =
-+ {
-+ /* Name , Data Ptr, Data Type */
-+ {"RxBufSize", 0, 2},
-+ {"RxBufferOffset", 0, 2},
-+ {"RxNumBuffers", 0, 2},
-+ {"RxServiceMax", 0, 2},
-+ {"TxNumBuffers", 0, 2},
-+ {"TxNumQueues", 0, 2},
-+ {"TxServiceMax", 0, 2},
-+#ifdef _CPHAL_AAL5
-+ {"CpcsUU", 0, 2},
-+ {"Gfc", 0, 2},
-+ {"Clp", 0, 2},
-+ {"Pti", 0, 2},
-+ {"DaMask", 0, 2},
-+ {"Priority", 0, 2},
-+ {"PktType", 0, 2},
-+ {"Vci", 0, 2},
-+ {"Vpi", 0, 2},
-+ {"CellRate", 0, 2},
-+ {"QosType", 0, 2},
-+ {"Mbs", 0, 2},
-+ {"Pcr", 0, 2}
-+#endif
-+ };
-+
-+static STATS_TABLE StatsTable4[] =
-+ {
-+ {"Base Address", 0, 1},
-+ {"Offset (VLYNQ)", 0, 0},
-+ {"Interrupt Line", 0, 0},
-+ {"Debug", 0, 0},
-+ {"Instance", 0, 0},
-+#ifdef _CPHAL_AAL5
-+ {"UniNni", 0, 0}
-+#endif
-+ };
-+
-+static STATS_DB StatsDb[] =
-+ {
-+ {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0},
-+ {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1},
-+ {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2},
-+ {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3},
-+ {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4}
-+ };
-+#endif /* +GSG 030307 */
-+
-+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
-+static void resetWait(HAL_DEVICE *HalDev)
-+ { /*+RC3.02*/
-+ const int TickReset=64;
-+ osfuncSleep((int*)&TickReset);
-+ } /*+RC3.02*/
-+#endif /* +RC 3.02 */
-+
-+/* I only define the reset base function for the modules
-+ that can perform a reset. The AAL5 and AAL2 modules
-+ do not perform a reset, that is done by the shared module
-+ CPSAR */
-+#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT)
-+/*
-+ * Determines the reset register address to be used for a particular device.
-+ * It will search the current device entry for Locator information. If the
-+ * device is a root device, there will be no Locator information, and the
-+ * function will find and return the root reset register. If a Locator value
-+ * is found, the function will search each VLYNQ device entry in the system
-+ * looking for a matching Locator. Once it finds a VLYNQ device entry with
-+ * a matching Locator, it will extract the "ResetBase" parameter from that
-+ * VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter).
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param ResetBase Pointer to integer address of reset register.
-+ *
-+ * @return 0 OK, Non-zero not OK
-+ */
-+static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase)
-+ {
-+ char *DeviceInfo = HalDev->DeviceInfo;
-+ char *MyLocator, *NextLocator;
-+ int Inst=1;
-+ bit32u error_code;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator);
-+ if (error_code)
-+ {
-+ /* if no Locator value, device is on the root, so get the "reset" device */
-+ error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo);
-+ if (error_code)
-+ {
-+ return(EC_VAL_DEVICE_NOT_FOUND);
-+ }
-+
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase);
-+ if (error_code)
-+ {
-+ return(EC_VAL_BASE_ADDR_NOT_FOUND);
-+ }
-+
-+ *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
-+
-+ /* found base address for root device, so we're done */
-+ return (EC_NO_ERRORS);
-+ }
-+ else
-+ {
-+ /* we have a Locator value, so the device is remote */
-+
-+ /* Find a vlynq device with a matching locator value */
-+ while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS)
-+ {
-+ error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator);
-+ if (error_code)
-+ {
-+ /* no Locator value for this VLYNQ, so move on */
-+ continue;
-+ }
-+ if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0)
-+ {
-+ /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase);
-+ if (error_code)
-+ {
-+ return(EC_VAL_BASE_ADDR_NOT_FOUND);
-+ }
-+ *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
-+
-+ /* found base address for root device, so we're done */
-+ return (EC_NO_ERRORS);
-+ }
-+ Inst++;
-+ } /* while */
-+ } /* else */
-+
-+ return (EC_NO_ERRORS);
-+ }
-+#endif
-+
-+#ifndef _CPHAL_AAL2 /* + RC 3.02 */
-+static bit32u ConfigGetCommon(HAL_DEVICE *HalDev)
-+ {
-+ bit32u ParmValue;
-+ bit32 error_code;
-+ char *DeviceInfo = HalDev->DeviceInfo;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue);
-+ if (error_code)
-+ {
-+ return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND);
-+ }
-+ HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue));
-+
-+#ifndef _CPHAL_AAL5
-+#ifndef _CPHAL_AAL2
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue);
-+ if(error_code)
-+ {
-+ return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND);
-+ }
-+ HalDev->ResetBit = ParmValue;
-+
-+ /* Get reset base address */
-+ error_code = ResetBaseGet(HalDev, &ParmValue);
-+ if (error_code)
-+ return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND);
-+ HalDev->ResetBase = ParmValue;
-+#endif
-+#endif
-+
-+#ifndef _CPHAL_CPSAR
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue);
-+ if (error_code)
-+ {
-+ return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND);
-+ }
-+ HalDev->interrupt = ParmValue;
-+#endif
-+
-+ /* only look for the offset if there is a Locator field, which indicates that
-+ the module is a VLYNQ module */
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue);
-+ if (!error_code)
-+ {
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue);
-+ if (error_code)
-+ {
-+ return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND);
-+ }
-+ HalDev->offset = ParmValue;
-+ }
-+ else
-+ HalDev->offset = 0;
-+
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue);
-+ if (!error_code) HalDev->debug = ParmValue;
-+
-+ return (EC_NO_ERRORS);
-+ }
-+#endif /* +RC 3.02 */
-+
-+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
-+static void StatsInit(HAL_DEVICE *HalDev) /* +() RC3.02 */
-+ {
-+ /* even though these statistics may be for multiple channels and
-+ queues, i need only configure the pointer to the beginning
-+ of the array, and I can index from there if necessary */
-+
-+#ifdef _CPHAL_AAL5
-+ StatsTable0[0].StatPtr = &HalDev->Stats.CrcErrors[0];
-+ StatsTable0[1].StatPtr = &HalDev->Stats.LenErrors[0];
-+ StatsTable0[2].StatPtr = &HalDev->Stats.AbortErrors[0];
-+ StatsTable0[3].StatPtr = &HalDev->Stats.StarvErrors[0];
-+
-+ StatsTable1[0].StatPtr = &HalDev->Stats.DmaLenErrors[0];
-+ StatsTable1[1].StatPtr = &HalDev->Stats.TxMisQCnt[0][0];
-+ StatsTable1[2].StatPtr = &HalDev->Stats.RxMisQCnt[0];
-+ StatsTable1[3].StatPtr = &HalDev->Stats.TxEOQCnt[0][0];
-+ StatsTable1[4].StatPtr = &HalDev->Stats.RxEOQCnt[0];
-+ StatsTable1[5].StatPtr = &HalDev->Stats.RxPacketsServiced[0];
-+ StatsTable1[6].StatPtr = &HalDev->Stats.TxPacketsServiced[0][0];
-+ StatsTable1[7].StatPtr = &HalDev->Stats.RxMaxServiced;
-+ StatsTable1[8].StatPtr = &HalDev->Stats.TxMaxServiced[0][0];
-+ StatsTable1[9].StatPtr = &HalDev->Stats.RxTotal;
-+ StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
-+#endif
-+
-+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC))
-+ StatsTable2[0].StatPtr = (bit32u *)&HalDev->RcbPool[0];
-+ StatsTable2[1].StatPtr = &HalDev->RxActQueueCount[0];
-+ StatsTable2[2].StatPtr = (bit32u *)&HalDev->RxActQueueHead[0];
-+ StatsTable2[3].StatPtr = (bit32u *)&HalDev->RxActQueueTail[0];
-+ StatsTable2[4].StatPtr = &HalDev->RxActive[0];
-+ StatsTable2[5].StatPtr = (bit32u *)&HalDev->RcbStart[0];
-+ StatsTable2[6].StatPtr = &HalDev->RxTeardownPending[0];
-+ StatsTable2[7].StatPtr = (bit32u *)&HalDev->TcbPool[0][0];
-+ StatsTable2[8].StatPtr = &HalDev->TxActQueueCount[0][0];
-+ StatsTable2[9].StatPtr = (bit32u *)&HalDev->TxActQueueHead[0][0];
-+ StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
-+ StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
-+ StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
-+ StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
-+
-+ StatsTable3[0].StatPtr = &HalDev->ChData[0].RxBufSize;
-+ StatsTable3[1].StatPtr = &HalDev->ChData[0].RxBufferOffset;
-+ StatsTable3[2].StatPtr = &HalDev->ChData[0].RxNumBuffers;
-+ StatsTable3[3].StatPtr = &HalDev->ChData[0].RxServiceMax;
-+ StatsTable3[4].StatPtr = &HalDev->ChData[0].TxNumBuffers;
-+ StatsTable3[5].StatPtr = &HalDev->ChData[0].TxNumQueues;
-+ StatsTable3[6].StatPtr = &HalDev->ChData[0].TxServiceMax;
-+#ifdef _CPHAL_AAL5
-+ StatsTable3[7].StatPtr = &HalDev->ChData[0].CpcsUU;
-+ StatsTable3[8].StatPtr = &HalDev->ChData[0].Gfc;
-+ StatsTable3[9].StatPtr = &HalDev->ChData[0].Clp;
-+ StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
-+ StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
-+ StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
-+ StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
-+ StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
-+ StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
-+ StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
-+ StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
-+ StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
-+ StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
-+#endif
-+#endif
-+
-+ StatsTable4[0].StatPtr = &HalDev->dev_base;
-+ StatsTable4[1].StatPtr = &HalDev->offset;
-+ StatsTable4[2].StatPtr = &HalDev->interrupt;
-+ StatsTable4[3].StatPtr = &HalDev->debug;
-+ StatsTable4[4].StatPtr = &HalDev->Inst;
-+ }
-+#endif /* +RC 3.02 */
-+
-+#ifndef _CPHAL_CPSAR /* +RC 3.02 */
-+#ifndef _CPHAL_AAL2 /* +RC 3.02 */
-+/*
-+ * Returns statistics information.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return 0
-+ */
-+static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue)
-+ {
-+ int Size;
-+ bit32u *AddrPtr;
-+ char *DataPtr;
-+ STATS_TABLE *StatsTable;
-+ int i, NumberOfStats;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n",
-+ (bit32u)HalDev, (bit32u)StatPtr);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ StatsTable = StatsDb[Index].StatTable;
-+ NumberOfStats = StatsDb[Index].NumberOfStats;
-+
-+ Size = sizeof(bit32u)*((NumberOfStats*2)+1);
-+ Size += (NumberOfStats*11);
-+ *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size);
-+
-+ AddrPtr = (bit32u *) *StatPtr;
-+ DataPtr = (char *)AddrPtr;
-+ DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1);
-+
-+ for (i=0; i<NumberOfStats; i++)
-+ {
-+ *AddrPtr++ = (bit32u)StatsTable[i].StatName;
-+ *AddrPtr++ = (bit32u)DataPtr;
-+ if (&StatsTable[i].StatPtr[Ch] != 0)
-+ {
-+ switch(StatsTable[i].DataType)
-+ {
-+ case 0:
-+ HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]);
-+ break;
-+ case 1:
-+ HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]);
-+ break;
-+ case 2:
-+ HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4))));
-+ break;
-+ case 3:
-+ HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
-+ break;
-+ case 4:
-+ HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
-+ break;
-+ default:
-+ /* invalid data type, due to CPHAL programming error */
-+ break;
-+ }
-+ }
-+ else
-+ {
-+ /* invalid statistics pointer, probably was not initialized */
-+ }
-+ DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1;
-+ }
-+
-+ *AddrPtr = (bit32u) 0;
-+
-+ return (EC_NO_ERRORS);
-+ }
-+#endif /* +RC 3.02 */
-+#endif /* +RC 3.02 */
-+
-+#ifdef _CPHAL_CPMAC
-+static void gpioFunctional(int base, int bit)
-+ { /*+RC3.02*/
-+ bit32u GpioEnr = base + 0xC;
-+ /* To make functional, set to zero */
-+ *(volatile bit32u *)(GpioEnr) &= ~(1 << bit); /*+RC3.02*/
-+ } /*+RC3.02*/
-+
-+
-+/*+RC3.02*/
-+/* Common function, Checks to see if GPIO should be in functional mode */
-+static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo)
-+ { /*+RC3.02*/
-+ int rc;
-+ void *DeviceInfo;
-+ char *pszMuxBits;
-+ char pszMuxBit[20];
-+ char *pszTmp;
-+ char szMuxBit[20];
-+ char *ptr;
-+ int base;
-+ int reset_bit;
-+ int bit;
-+ OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+
-+ rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp);
-+ if(rc) return;
-+ /* gpio entry found, get GPIO register info and make functional */
-+
-+ /* temp copy until FinParmValue fixed */
-+ ptr = &szMuxBit[0];
-+ while ((*ptr++ = *pszTmp++));
-+
-+ pszMuxBits = &szMuxBit[0];
-+
-+ rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo);
-+ if(rc) return;
-+
-+ rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base);
-+ if(rc) return;
-+
-+ rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
-+ if(rc) return;
-+
-+ /* If GPIO still in reset, then exit */
-+ if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0)
-+ return;
-+ /* format for gpio_mux is gpio_mux = <int>;<int>;<int>...*/
-+ while (*pszMuxBits)
-+ {
-+ pszTmp = &pszMuxBit[0];
-+ if(*pszMuxBits == ';') pszMuxBits++;
-+ while ((*pszMuxBits != ';') && (*pszMuxBits != '\0'))
-+ {
-+ osfuncSioFlush();
-+ /*If value not a number, skip */
-+ if((*pszMuxBits < '0') || (*pszMuxBits > '9'))
-+ pszMuxBits++;
-+ else
-+ *pszTmp++ = *pszMuxBits++;
-+ }
-+ *pszTmp = '\0';
-+ bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10);
-+ gpioFunctional(base, bit);
-+ resetWait(HalDev); /* not sure if this is needed */
-+ }
-+ } /*+RC3.02*/
-+#endif /* CPMAC */
-+
-+#ifdef _CPHAL_AAL5
-+const char hcSarFrequency[] = "SarFreq";
-+#endif
-+
-+#endif /* _INC */
-diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.h
---- linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.h 2005-08-23 04:46:50.082845976 +0200
-@@ -0,0 +1,79 @@
-+#ifndef _INC_CPCOMMON_H
-+#define _INC_CPCOMMON_H
-+
-+#define VOLATILE32(addr) (*(volatile bit32u *)(addr))
-+#ifndef dbgPrintf
-+#define dbgPrintf HalDev->OsFunc->Printf
-+#endif
-+
-+#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
-+
-+#define DBG(level) (HalDev->debug & (1<<(level)))
-+/*
-+#define DBG0() DBG(0)
-+#define DBG1() DBG(1)
-+#define DBG2() DBG(2)
-+#define DBG3() DBG(3)
-+#define DBG4() DBG(4)
-+#define DBG5() DBG(5)
-+#define DBG6() DBG(6)
-+#define DBG7() DBG(7)
-+*/
-+
-+/*
-+ * List of defined actions for use with Control().
-+ */
-+typedef enum
-+ {
-+ enGET=0, /**< Get the value associated with a key */
-+ enSET, /**< Set the value associates with a key */
-+ enCLEAR, /**<Clear the value */
-+ enNULL /**< No data action, used to initiate a service or send a message */
-+ }ACTION;
-+
-+/*
-+ * Enumerated hardware states.
-+ */
-+typedef enum
-+ {
-+ enConnected=1, enDevFound, enInitialized, enOpened
-+ }DEVICE_STATE;
-+
-+typedef enum
-+ {
-+ enCommonStart=0,
-+ /* General */
-+ enOff, enOn, enDebug,
-+ /* Module General */
-+ enCpuFreq,
-+ enStatus,
-+ enCommonEnd
-+ }COMMON_KEY;
-+
-+typedef struct
-+ {
-+ const char *strKey;
-+ int enKey;
-+ }CONTROL_KEY;
-+
-+typedef struct
-+ {
-+ char *StatName;
-+ unsigned int *StatPtr;
-+ int DataType; /* 0: int, 1: hex int, 2:channel data */
-+ }STATS_TABLE;
-+
-+typedef struct
-+ {
-+ int NumberOfStats;
-+ STATS_TABLE *StatTable;
-+ }STATS_DB;
-+
-+#define osfuncSioFlush() HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0)
-+#define osfuncSleep(Ticks) HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks)
-+#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0)
-+
-+#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"}
-+
-+#endif
-+
-diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.c linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.c
---- linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.c 2005-08-23 04:46:50.082845976 +0200
-@@ -0,0 +1,728 @@
-+#ifndef _INC_CPCOMMON_C
-+#define _INC_CPCOMMON_C
-+
-+#ifdef _CPHAL_CPMAC
-+#include "cpremap_cpmac.c"
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+#include "cpremap_cpaal5.c"
-+#endif
-+
-+#ifdef _CPHAL_CPSAR
-+#include "cpremap_cpsar.c"
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+#include "cpremap_cpaal2.c"
-+#endif
-+
-+/**
-+@defgroup Common_Config_Params Common Configuration Parameters
-+
-+This section documents the configuration parameters that are valid across
-+all CPHAL devices.
-+@{
-+*/
-+/** This is the debug level. The field is bit defined, such that the user
-+should set to 1 all the bits corresponding to desired debug outputs. The following
-+are the meanings for each debug bit:
-+- bit0 (LSB): CPHAL Function Trace
-+- b1 : OS Function call trace
-+- b2 : Critical section entry/exit
-+- b3 : Memory allocation/destruction
-+- b4 : Detailed information in Rx path
-+- b5 : Detailed information in Tx path
-+- b6 : Extended error information
-+- b7 : General info
-+*/
-+static const char pszDebug[] = "debug";
-+/** CPU Frequency. */
-+/*static const char pszCpuFreq[] = "CpuFreq";*/ /*MJH-030403*/
-+/** Base address for the module. */
-+static const char pszBase[] = "base";
-+/** Reset bit for the module. */
-+static const char pszResetBit[] = "reset_bit";
-+/** Reset base address for the module. */
-+static const char pszResetBase[] = "ResetBase";
-+/** Interrupt line for the module. */
-+static const char pszIntLine[] = "int_line";
-+/** VLYNQ offset for the module. Disregard if not using VLYNQ. */
-+static const char pszOffset[] = "offset";
-+/** The OS may "Get" this parameter, which is a pointer
-+ to a character string that indicates the version of CPHAL. */
-+static const char pszVer[] = "Version";
-+/*@}*/
-+
-+/**
-+@defgroup Common_Control_Params Common Keys for [os]Control()
-+
-+This section documents the keys used with the OS @c Control() interface that
-+are required by CPHAL devices.
-+
-+@{
-+*/
-+/** Used to wait for an integer number of clock ticks, given as an integer
-+ pointer in the @p Value parameter. No actions are defined. */
-+static const char pszSleep[] = "Sleep";
-+/** Requests the OS to flush it's IO buffers. No actions are defined. */
-+static const char pszSioFlush[] = "SioFlush";
-+/*@}*/
-+
-+static const char pszStateChange[] = "StateChange";
-+static const char pszStatus[] = "Status";
-+
-+static const char pszGET[] = "Get";
-+static const char pszSET[] = "Set";
-+static const char pszCLEAR[] = "Clear";
-+static const char pszNULL[] = "";
-+static const char pszLocator[] = "Locator";
-+static const char pszOff[] = "Off";
-+static const char pszOn[] = "On";
-+static const char hcMaxFrags[] = "MaxFrags";
-+
-+#ifdef _CPHAL_CPMAC
-+
-+/* New method for string constants */
-+const char hcClear[] = "Clear";
-+const char hcGet[] = "Get";
-+const char hcSet[] = "Set";
-+
-+const char hcTick[] = "Tick";
-+
-+static const CONTROL_KEY KeyCommon[] =
-+ {
-+ {"" , enCommonStart},
-+ {pszStatus , enStatus},
-+ {pszOff , enOff},
-+ {pszOn , enOn},
-+ {pszDebug , enDebug},
-+ {hcCpuFrequency , enCpuFreq}, /*MJH~030403*/
-+ {"" , enCommonEnd}
-+ };
-+#endif
-+
-+/**
-+@defgroup Common_Statistics Statistics
-+
-+A broad array of module statistics is available. Statistics values are accessed
-+through the @c Control() interface of the CPHAL. There are 5 different levels
-+of statistics, each of which correspond to a unique set of data. Furthermore,
-+certain statistics data is indexed by using a channel number and Tx queue number.
-+The following is a brief description of each statistics level, along with the
-+indexes used for the level:
-+
-+- Level 0: Hardware Statistics (index with channel)
-+- Level 1: CPHAL Software Statistics (channel, queue)
-+- Level 2: CPHAL Flags (channel, queue)
-+- Level 3: CPHAL Channel Configuration (channel)
-+- Level 4: CPHAL General Configuration (no index)
-+
-+The caller requests statistics information by providing a Key string to the
-+@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]".
-+The only valid Action parameter for statistics usage is "Get".
-+
-+Code Examples:
-+@code
-+unsigned int *StatsData;
-+
-+# Get Level 0 stats for Channel 1
-+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
-+
-+# Get Level 2 stats for Channel 0, Queue 0
-+HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData);
-+
-+# Get Level 4 stats
-+HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData);
-+@endcode
-+
-+The information returned in the Value parameter of @c Control() is an
-+array of pointers to strings. The pointers are arranged in pairs.
-+The first pointer is a pointer to a name string for a particular statistic.
-+The next pointer is a pointer to a string containing the representation of
-+the integer statistic value corresponding to the first pointer. This is followed
-+by another pair of pointers, and so on, until a NULL pointer is encountered. The
-+following is example code for processing the statistics data. Note that the OS
-+is responsible for freeing the memory passed back through the Value parameter of
-+@c Control().
-+
-+@code
-+unsigned int *StatsData;
-+
-+# Get Level 0 stats for Channel 1
-+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData);
-+
-+# output Statistics data
-+PrintStats(StatsData);
-+
-+# the upper layer is responsible for freeing stats info
-+free(&StatsPtr);
-+
-+...
-+
-+void PrintStats(unsigned int *StatsPtr)
-+ {
-+ while(*StatsPtr)
-+ {
-+ printf("%20s:", (char *)*StatsPtr);
-+ StatsPtr++;
-+ printf("%11s\n", (char *)*StatsPtr);
-+ StatsPtr++;
-+ }
-+ MySioFlush();
-+ }
-+@endcode
-+
-+Within each statistics level, there are several statistics defined. The statistics that
-+are common to every CPPI module are listed below. In addition, each module may define
-+extra statistics in each level, which will be documented within the module-specific
-+documentation appendices.
-+
-+- Level 0 Statistics
-+ - All level 0 statistics are module-specific.
-+- Level 1 Statistics (CPHAL Software Statistics)
-+ - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only)
-+ - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes
-+transmitting the previous last packet in the queue (per channel and queue).
-+ - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the
-+reception of the previous last packet in the queue (per channel).
-+ - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue).
-+ - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel).
-+ - RxPacketsServiced: Number of received packets (per channel).
-+ - TxPacketsServiced: Number of transmitted packets (per channel and queue).
-+ - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel).
-+ - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue).
-+ - RxTotal: Total number of received packets, all channels.
-+ - TxTotal: Total number of transmitted packets, all channels and queues.
-+- Level 2 Statistics (CPHAL Flags)
-+ - RcbPool: Pointer to receive descriptor pool (per channel).
-+ - RxActQueueCount: Number of buffers currently available for receive (per channel).
-+ - RxActQueueHead: Pointer to first buffer in receive queue (per channel).
-+ - RxActQueueTail: Pointer to last buffer in receive queue (per channel).
-+ - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available).
-+ - RcbStart: Pointer to block of receive descriptors.
-+ - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise.
-+ - TcbPool: Pointer to transmit descriptor pool (per channel and queue).
-+ - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue).
-+ - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue).
-+ - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue).
-+ - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send).
-+ - TcbStart: Pointer to block of transmit descriptors.
-+ - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise.
-+- Level 3 Statistics (CPHAL Channel Configuration)
-+ - RxBufSize: Rx buffer size.
-+ - RxBufferOffset: Rx buffer offset.
-+ - RxNumBuffers: Number of Rx buffers.
-+ - RxServiceMax: Maximum number of receive packets to service at a time.
-+ - TxNumBuffers: Number of Tx buffer descriptors.
-+ - TxNumQueues: Number of Tx queues to use.
-+ - TxServiceMax: Maximum number of transmit packets to service at a time.
-+- Level 4 Statistics (CPHAL General Configuration)
-+ - Base Address: Base address of the module.
-+ - Offset (VLYNQ): VLYNQ relative module offset.
-+ - Interrupt Line: Interrupt number.
-+ - Debug: Debug flag, 1 to enable debug.
-+ - Inst: Instance number.
-+*/
-+
-+/*
-+ Data Type 0 = int display
-+ Data Type 1 = hex display
-+ Data Type 2 = channel structure, int display
-+ Data Type 3 = queue index and int display
-+ Data Type 4 = queue index and hex display
-+*/
-+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */
-+static STATS_TABLE StatsTable0[] =
-+ {
-+#ifdef _CPHAL_AAL5
-+ /* Name , Data Ptr, Data Type */
-+ {"Crc Errors", 0, 0},
-+ {"Len Errors", 0, 0},
-+ {"Abort Errors", 0, 0},
-+ {"Starv Errors", 0, 0}
-+#endif
-+#ifdef _CPHAL_CPMAC
-+ {"Rx Good Frames", 0, 0}
-+#endif
-+ };
-+
-+static STATS_TABLE StatsTable1[] =
-+ {
-+ /* Name , Data Ptr, Data Type */
-+ {"DmaLenErrors", 0, 0},
-+ {"TxMisQCnt", 0, 3},
-+ {"RxMisQCnt", 0, 0},
-+ {"TxEOQCnt", 0, 3},
-+ {"RxEOQCnt", 0, 0},
-+ {"RxPacketsServiced", 0, 0},
-+ {"TxPacketsServiced", 0, 3},
-+ {"RxMaxServiced", 0, 0},
-+ {"TxMaxServiced", 0, 3},
-+ {"RxTotal", 0, 0},
-+ {"TxTotal", 0, 0},
-+ };
-+
-+static STATS_TABLE StatsTable2[] =
-+ {
-+ /* Name , Data Ptr, Data Type */
-+ {"RcbPool", 0, 1},
-+ {"RxActQueueCount", 0, 0},
-+ {"RxActQueueHead", 0, 1},
-+ {"RxActQueueTail", 0, 1},
-+ {"RxActive", 0, 0},
-+ {"RcbStart", 0, 1},
-+ {"RxTeardownPending", 0, 0},
-+ {"TcbPool", 0, 4},
-+ {"TxActQueueCount", 0, 3},
-+ {"TxActQueueHead", 0, 4},
-+ {"TxActQueueTail", 0, 4},
-+ {"TxActive", 0, 3},
-+ {"TcbStart", 0, 4},
-+ {"TxTeardownPending", 0, 0}
-+ };
-+
-+static STATS_TABLE StatsTable3[] =
-+ {
-+ /* Name , Data Ptr, Data Type */
-+ {"RxBufSize", 0, 2},
-+ {"RxBufferOffset", 0, 2},
-+ {"RxNumBuffers", 0, 2},
-+ {"RxServiceMax", 0, 2},
-+ {"TxNumBuffers", 0, 2},
-+ {"TxNumQueues", 0, 2},
-+ {"TxServiceMax", 0, 2},
-+#ifdef _CPHAL_AAL5
-+ {"CpcsUU", 0, 2},
-+ {"Gfc", 0, 2},
-+ {"Clp", 0, 2},
-+ {"Pti", 0, 2},
-+ {"DaMask", 0, 2},
-+ {"Priority", 0, 2},
-+ {"PktType", 0, 2},
-+ {"Vci", 0, 2},
-+ {"Vpi", 0, 2},
-+ {"CellRate", 0, 2},
-+ {"QosType", 0, 2},
-+ {"Mbs", 0, 2},
-+ {"Pcr", 0, 2}
-+#endif
-+ };
-+
-+static STATS_TABLE StatsTable4[] =
-+ {
-+ {"Base Address", 0, 1},
-+ {"Offset (VLYNQ)", 0, 0},
-+ {"Interrupt Line", 0, 0},
-+ {"Debug", 0, 0},
-+ {"Instance", 0, 0},
-+#ifdef _CPHAL_AAL5
-+ {"UniNni", 0, 0}
-+#endif
-+ };
-+
-+static STATS_DB StatsDb[] =
-+ {
-+ {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0},
-+ {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1},
-+ {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2},
-+ {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3},
-+ {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4}
-+ };
-+#endif /* +GSG 030307 */
-+
-+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
-+static void resetWait(HAL_DEVICE *HalDev)
-+ { /*+RC3.02*/
-+ const int TickReset=64;
-+ osfuncSleep((int*)&TickReset);
-+ } /*+RC3.02*/
-+#endif /* +RC 3.02 */
-+
-+/* I only define the reset base function for the modules
-+ that can perform a reset. The AAL5 and AAL2 modules
-+ do not perform a reset, that is done by the shared module
-+ CPSAR */
-+#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT)
-+/*
-+ * Determines the reset register address to be used for a particular device.
-+ * It will search the current device entry for Locator information. If the
-+ * device is a root device, there will be no Locator information, and the
-+ * function will find and return the root reset register. If a Locator value
-+ * is found, the function will search each VLYNQ device entry in the system
-+ * looking for a matching Locator. Once it finds a VLYNQ device entry with
-+ * a matching Locator, it will extract the "ResetBase" parameter from that
-+ * VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter).
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param ResetBase Pointer to integer address of reset register.
-+ *
-+ * @return 0 OK, Non-zero not OK
-+ */
-+static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase)
-+ {
-+ char *DeviceInfo = HalDev->DeviceInfo;
-+ char *MyLocator, *NextLocator;
-+ int Inst=1;
-+ bit32u error_code;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator);
-+ if (error_code)
-+ {
-+ /* if no Locator value, device is on the root, so get the "reset" device */
-+ error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo);
-+ if (error_code)
-+ {
-+ return(EC_VAL_DEVICE_NOT_FOUND);
-+ }
-+
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase);
-+ if (error_code)
-+ {
-+ return(EC_VAL_BASE_ADDR_NOT_FOUND);
-+ }
-+
-+ *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
-+
-+ /* found base address for root device, so we're done */
-+ return (EC_NO_ERRORS);
-+ }
-+ else
-+ {
-+ /* we have a Locator value, so the device is remote */
-+
-+ /* Find a vlynq device with a matching locator value */
-+ while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS)
-+ {
-+ error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator);
-+ if (error_code)
-+ {
-+ /* no Locator value for this VLYNQ, so move on */
-+ continue;
-+ }
-+ if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0)
-+ {
-+ /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase);
-+ if (error_code)
-+ {
-+ return(EC_VAL_BASE_ADDR_NOT_FOUND);
-+ }
-+ *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase));
-+
-+ /* found base address for root device, so we're done */
-+ return (EC_NO_ERRORS);
-+ }
-+ Inst++;
-+ } /* while */
-+ } /* else */
-+
-+ return (EC_NO_ERRORS);
-+ }
-+#endif
-+
-+#ifndef _CPHAL_AAL2 /* + RC 3.02 */
-+static bit32u ConfigGetCommon(HAL_DEVICE *HalDev)
-+ {
-+ bit32u ParmValue;
-+ bit32 error_code;
-+ char *DeviceInfo = HalDev->DeviceInfo;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue);
-+ if (error_code)
-+ {
-+ return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND);
-+ }
-+ HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue));
-+
-+#ifndef _CPHAL_AAL5
-+#ifndef _CPHAL_AAL2
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue);
-+ if(error_code)
-+ {
-+ return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND);
-+ }
-+ HalDev->ResetBit = ParmValue;
-+
-+ /* Get reset base address */
-+ error_code = ResetBaseGet(HalDev, &ParmValue);
-+ if (error_code)
-+ return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND);
-+ HalDev->ResetBase = ParmValue;
-+#endif
-+#endif
-+
-+#ifndef _CPHAL_CPSAR
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue);
-+ if (error_code)
-+ {
-+ return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND);
-+ }
-+ HalDev->interrupt = ParmValue;
-+#endif
-+
-+ /* only look for the offset if there is a Locator field, which indicates that
-+ the module is a VLYNQ module */
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue);
-+ if (!error_code)
-+ {
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue);
-+ if (error_code)
-+ {
-+ return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND);
-+ }
-+ HalDev->offset = ParmValue;
-+ }
-+ else
-+ HalDev->offset = 0;
-+
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue);
-+ if (!error_code) HalDev->debug = ParmValue;
-+
-+ return (EC_NO_ERRORS);
-+ }
-+#endif /* +RC 3.02 */
-+
-+#ifdef _CPHAL_CPMAC /* +RC 3.02 */
-+static void StatsInit(HAL_DEVICE *HalDev) /* +() RC3.02 */
-+ {
-+ /* even though these statistics may be for multiple channels and
-+ queues, i need only configure the pointer to the beginning
-+ of the array, and I can index from there if necessary */
-+
-+#ifdef _CPHAL_AAL5
-+ StatsTable0[0].StatPtr = &HalDev->Stats.CrcErrors[0];
-+ StatsTable0[1].StatPtr = &HalDev->Stats.LenErrors[0];
-+ StatsTable0[2].StatPtr = &HalDev->Stats.AbortErrors[0];
-+ StatsTable0[3].StatPtr = &HalDev->Stats.StarvErrors[0];
-+
-+ StatsTable1[0].StatPtr = &HalDev->Stats.DmaLenErrors[0];
-+ StatsTable1[1].StatPtr = &HalDev->Stats.TxMisQCnt[0][0];
-+ StatsTable1[2].StatPtr = &HalDev->Stats.RxMisQCnt[0];
-+ StatsTable1[3].StatPtr = &HalDev->Stats.TxEOQCnt[0][0];
-+ StatsTable1[4].StatPtr = &HalDev->Stats.RxEOQCnt[0];
-+ StatsTable1[5].StatPtr = &HalDev->Stats.RxPacketsServiced[0];
-+ StatsTable1[6].StatPtr = &HalDev->Stats.TxPacketsServiced[0][0];
-+ StatsTable1[7].StatPtr = &HalDev->Stats.RxMaxServiced;
-+ StatsTable1[8].StatPtr = &HalDev->Stats.TxMaxServiced[0][0];
-+ StatsTable1[9].StatPtr = &HalDev->Stats.RxTotal;
-+ StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal;
-+#endif
-+
-+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC))
-+ StatsTable2[0].StatPtr = (bit32u *)&HalDev->RcbPool[0];
-+ StatsTable2[1].StatPtr = &HalDev->RxActQueueCount[0];
-+ StatsTable2[2].StatPtr = (bit32u *)&HalDev->RxActQueueHead[0];
-+ StatsTable2[3].StatPtr = (bit32u *)&HalDev->RxActQueueTail[0];
-+ StatsTable2[4].StatPtr = &HalDev->RxActive[0];
-+ StatsTable2[5].StatPtr = (bit32u *)&HalDev->RcbStart[0];
-+ StatsTable2[6].StatPtr = &HalDev->RxTeardownPending[0];
-+ StatsTable2[7].StatPtr = (bit32u *)&HalDev->TcbPool[0][0];
-+ StatsTable2[8].StatPtr = &HalDev->TxActQueueCount[0][0];
-+ StatsTable2[9].StatPtr = (bit32u *)&HalDev->TxActQueueHead[0][0];
-+ StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0];
-+ StatsTable2[11].StatPtr = &HalDev->TxActive[0][0];
-+ StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0];
-+ StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0];
-+
-+ StatsTable3[0].StatPtr = &HalDev->ChData[0].RxBufSize;
-+ StatsTable3[1].StatPtr = &HalDev->ChData[0].RxBufferOffset;
-+ StatsTable3[2].StatPtr = &HalDev->ChData[0].RxNumBuffers;
-+ StatsTable3[3].StatPtr = &HalDev->ChData[0].RxServiceMax;
-+ StatsTable3[4].StatPtr = &HalDev->ChData[0].TxNumBuffers;
-+ StatsTable3[5].StatPtr = &HalDev->ChData[0].TxNumQueues;
-+ StatsTable3[6].StatPtr = &HalDev->ChData[0].TxServiceMax;
-+#ifdef _CPHAL_AAL5
-+ StatsTable3[7].StatPtr = &HalDev->ChData[0].CpcsUU;
-+ StatsTable3[8].StatPtr = &HalDev->ChData[0].Gfc;
-+ StatsTable3[9].StatPtr = &HalDev->ChData[0].Clp;
-+ StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti;
-+ StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask;
-+ StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority;
-+ StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType;
-+ StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci;
-+ StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi;
-+ StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate;
-+ StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType;
-+ StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs;
-+ StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr;
-+#endif
-+#endif
-+
-+ StatsTable4[0].StatPtr = &HalDev->dev_base;
-+ StatsTable4[1].StatPtr = &HalDev->offset;
-+ StatsTable4[2].StatPtr = &HalDev->interrupt;
-+ StatsTable4[3].StatPtr = &HalDev->debug;
-+ StatsTable4[4].StatPtr = &HalDev->Inst;
-+ }
-+#endif /* +RC 3.02 */
-+
-+#ifndef _CPHAL_CPSAR /* +RC 3.02 */
-+#ifndef _CPHAL_AAL2 /* +RC 3.02 */
-+/*
-+ * Returns statistics information.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return 0
-+ */
-+static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue)
-+ {
-+ int Size;
-+ bit32u *AddrPtr;
-+ char *DataPtr;
-+ STATS_TABLE *StatsTable;
-+ int i, NumberOfStats;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n",
-+ (bit32u)HalDev, (bit32u)StatPtr);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ StatsTable = StatsDb[Index].StatTable;
-+ NumberOfStats = StatsDb[Index].NumberOfStats;
-+
-+ Size = sizeof(bit32u)*((NumberOfStats*2)+1);
-+ Size += (NumberOfStats*11);
-+ *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size);
-+
-+ AddrPtr = (bit32u *) *StatPtr;
-+ DataPtr = (char *)AddrPtr;
-+ DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1);
-+
-+ for (i=0; i<NumberOfStats; i++)
-+ {
-+ *AddrPtr++ = (bit32u)StatsTable[i].StatName;
-+ *AddrPtr++ = (bit32u)DataPtr;
-+ if (&StatsTable[i].StatPtr[Ch] != 0)
-+ {
-+ switch(StatsTable[i].DataType)
-+ {
-+ case 0:
-+ HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]);
-+ break;
-+ case 1:
-+ HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]);
-+ break;
-+ case 2:
-+ HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4))));
-+ break;
-+ case 3:
-+ HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
-+ break;
-+ case 4:
-+ HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue));
-+ break;
-+ default:
-+ /* invalid data type, due to CPHAL programming error */
-+ break;
-+ }
-+ }
-+ else
-+ {
-+ /* invalid statistics pointer, probably was not initialized */
-+ }
-+ DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1;
-+ }
-+
-+ *AddrPtr = (bit32u) 0;
-+
-+ return (EC_NO_ERRORS);
-+ }
-+#endif /* +RC 3.02 */
-+#endif /* +RC 3.02 */
-+
-+#ifdef _CPHAL_CPMAC
-+static void gpioFunctional(int base, int bit)
-+ { /*+RC3.02*/
-+ bit32u GpioEnr = base + 0xC;
-+ /* To make functional, set to zero */
-+ *(volatile bit32u *)(GpioEnr) &= ~(1 << bit); /*+RC3.02*/
-+ } /*+RC3.02*/
-+
-+
-+/*+RC3.02*/
-+/* Common function, Checks to see if GPIO should be in functional mode */
-+static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo)
-+ { /*+RC3.02*/
-+ int rc;
-+ void *DeviceInfo;
-+ char *pszMuxBits;
-+ char pszMuxBit[20];
-+ char *pszTmp;
-+ char szMuxBit[20];
-+ char *ptr;
-+ int base;
-+ int reset_bit;
-+ int bit;
-+ OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+
-+ rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp);
-+ if(rc) return;
-+ /* gpio entry found, get GPIO register info and make functional */
-+
-+ /* temp copy until FinParmValue fixed */
-+ ptr = &szMuxBit[0];
-+ while ((*ptr++ = *pszTmp++));
-+
-+ pszMuxBits = &szMuxBit[0];
-+
-+ rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo);
-+ if(rc) return;
-+
-+ rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base);
-+ if(rc) return;
-+
-+ rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit);
-+ if(rc) return;
-+
-+ /* If GPIO still in reset, then exit */
-+ if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0)
-+ return;
-+ /* format for gpio_mux is gpio_mux = <int>;<int>;<int>...*/
-+ while (*pszMuxBits)
-+ {
-+ pszTmp = &pszMuxBit[0];
-+ if(*pszMuxBits == ';') pszMuxBits++;
-+ while ((*pszMuxBits != ';') && (*pszMuxBits != '\0'))
-+ {
-+ osfuncSioFlush();
-+ /*If value not a number, skip */
-+ if((*pszMuxBits < '0') || (*pszMuxBits > '9'))
-+ pszMuxBits++;
-+ else
-+ *pszTmp++ = *pszMuxBits++;
-+ }
-+ *pszTmp = '\0';
-+ bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10);
-+ gpioFunctional(base, bit);
-+ resetWait(HalDev); /* not sure if this is needed */
-+ }
-+ } /*+RC3.02*/
-+#endif /* CPMAC */
-+
-+#ifdef _CPHAL_AAL5
-+const char hcSarFrequency[] = "SarFreq";
-+#endif
-+
-+#endif /* _INC */
-diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.h linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.h
---- linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.h 2005-08-23 04:46:50.083845824 +0200
-@@ -0,0 +1,79 @@
-+#ifndef _INC_CPCOMMON_H
-+#define _INC_CPCOMMON_H
-+
-+#define VOLATILE32(addr) (*(volatile bit32u *)(addr))
-+#ifndef dbgPrintf
-+#define dbgPrintf HalDev->OsFunc->Printf
-+#endif
-+
-+#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field
-+
-+#define DBG(level) (HalDev->debug & (1<<(level)))
-+/*
-+#define DBG0() DBG(0)
-+#define DBG1() DBG(1)
-+#define DBG2() DBG(2)
-+#define DBG3() DBG(3)
-+#define DBG4() DBG(4)
-+#define DBG5() DBG(5)
-+#define DBG6() DBG(6)
-+#define DBG7() DBG(7)
-+*/
-+
-+/*
-+ * List of defined actions for use with Control().
-+ */
-+typedef enum
-+ {
-+ enGET=0, /**< Get the value associated with a key */
-+ enSET, /**< Set the value associates with a key */
-+ enCLEAR, /**<Clear the value */
-+ enNULL /**< No data action, used to initiate a service or send a message */
-+ }ACTION;
-+
-+/*
-+ * Enumerated hardware states.
-+ */
-+typedef enum
-+ {
-+ enConnected=1, enDevFound, enInitialized, enOpened
-+ }DEVICE_STATE;
-+
-+typedef enum
-+ {
-+ enCommonStart=0,
-+ /* General */
-+ enOff, enOn, enDebug,
-+ /* Module General */
-+ enCpuFreq,
-+ enStatus,
-+ enCommonEnd
-+ }COMMON_KEY;
-+
-+typedef struct
-+ {
-+ const char *strKey;
-+ int enKey;
-+ }CONTROL_KEY;
-+
-+typedef struct
-+ {
-+ char *StatName;
-+ unsigned int *StatPtr;
-+ int DataType; /* 0: int, 1: hex int, 2:channel data */
-+ }STATS_TABLE;
-+
-+typedef struct
-+ {
-+ int NumberOfStats;
-+ STATS_TABLE *StatTable;
-+ }STATS_DB;
-+
-+#define osfuncSioFlush() HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0)
-+#define osfuncSleep(Ticks) HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks)
-+#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0)
-+
-+#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"}
-+
-+#endif
-+
-diff -urN linux.old/drivers/atm/sangam_atm/cppi_cpaal5.c linux.dev/drivers/atm/sangam_atm/cppi_cpaal5.c
---- linux.old/drivers/atm/sangam_atm/cppi_cpaal5.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cppi_cpaal5.c 2005-08-23 04:46:50.084845672 +0200
-@@ -0,0 +1,1483 @@
-+/*************************************************************************
-+ * TNETDxxxx Software Support
-+ * Copyright (c) 2002,2003 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ * FILE: cppi.c
-+ *
-+ * DESCRIPTION:
-+ * This file contains shared code for all CPPI modules.
-+ *
-+ * HISTORY:
-+ * 7Aug02 Greg RC1.00 Original Version created.
-+ * 27Sep02 Mick RC1.01 Merged for use by CPMAC/CPSAR
-+ * 16Oct02 Mick RC1.02 Performance Tweaks (see cppihist.txt)
-+ * 12Nov02 Mick RC1.02 Updated to use cpmac_reg.h
-+ * 09Jan03 Mick RC3.01 Removed modification to RxBuffer ptr
-+ * 28Mar03 Mick 1.03 RxReturn now returns error if Malloc Fails
-+ * 10Apr03 Mick 1.03.02 Added Needs Buffer Support
-+ * 11Jun03 Mick 1.06.02 halSend() errors corrected
-+ *
-+ * @author Greg Guyotte
-+ * @version 1.00
-+ * @date 7-Aug-2002
-+ *****************************************************************************/
-+/* each CPPI module must modify this file, the rest of the
-+ code in cppi.c should be totally shared *//* Each CPPI module MUST properly define all constants shown below */
-+
-+/* CPPI registers */
-+
-+/* the following defines are not CPPI specific, but still used by cppi.c */
-+
-+static void FreeRx(HAL_DEVICE *HalDev, int Ch)
-+ {
-+ HAL_RCB *rcb_ptr; /*+GSG 030303*/
-+ int rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf; /*+GSG 030303*/
-+ int Num = HalDev->ChData[Ch].RxNumBuffers, i; /*+GSG 030303*/
-+
-+ /* Free Rx data buffers attached to descriptors, if necessary */
-+ if (HalDev->RcbStart[Ch] != 0) /*+GSG 030303*/
-+ { /*+GSG 030303*/
-+ for(i=0;i<Num;i++) /*+GSG 030303*/
-+ { /*+GSG 030303*/
-+ rcb_ptr = (HAL_RCB *)(HalDev->RcbStart[Ch] + (i*rcbSize)); /*+GSG 030303*/
-+
-+ /* free the data buffer */
-+ if (rcb_ptr->DatPtr != 0)
-+ {
-+
-+ HalDev->OsFunc->FreeRxBuffer((void *)rcb_ptr->OsInfo, (void *)rcb_ptr->DatPtr);
-+ rcb_ptr->OsInfo=0; /*MJH+030522*/
-+ rcb_ptr->DatPtr=0; /*MJH+030522*/
-+ }
-+ } /*+GSG 030303*/
-+ } /*+GSG 030303*/
-+
-+ /* free up all desciptors at once */
-+ HalDev->OsFunc->FreeDmaXfer(HalDev->RcbStart[Ch]);
-+
-+ /* mark buffers as freed */
-+ HalDev->RcbStart[Ch] = 0;
-+ }
-+
-+static void FreeTx(HAL_DEVICE *HalDev, int Ch, int Queue)
-+ {
-+
-+/*+GSG 030303*/
-+
-+ /* free all descriptors at once */
-+ HalDev->OsFunc->FreeDmaXfer(HalDev->TcbStart[Ch][Queue]);
-+
-+ HalDev->TcbStart[Ch][Queue] = 0;
-+ }
-+
-+/* return of 0 means that this code executed, -1 means the interrupt was not
-+ a teardown interrupt */
-+static int RxTeardownInt(HAL_DEVICE *HalDev, int Ch)
-+ {
-+ bit32u base = HalDev->dev_base;
-+
-+ int i;
-+ volatile bit32u *pTmp;
-+
-+ /* check to see if the interrupt is a teardown interrupt */
-+ if (((*(pRX_CPPI_COMP_PTR( base )+( Ch *64))) & TEARDOWN_VAL) == TEARDOWN_VAL)
-+ {
-+ /* finish channel teardown */
-+
-+ /* Free channel resources on a FULL teardown */
-+ if (HalDev->RxTeardownPending[Ch] & FULL_TEARDOWN)
-+ {
-+ FreeRx(HalDev, Ch);
-+ }
-+
-+ /* bug fix - clear Rx channel pointers on teardown */
-+ HalDev->RcbPool[Ch] = 0;
-+ HalDev->RxActQueueHead[Ch] = 0;
-+ HalDev->RxActQueueCount[Ch] = 0;
-+ HalDev->RxActive[Ch] = FALSE;
-+
-+ /* write completion pointer */
-+ (*(pRX_CPPI_COMP_PTR( base )+( Ch *64))) = TEARDOWN_VAL;
-+
-+ /* use direction bit as a teardown pending bit! May be able to
-+ use only one teardown pending integer in HalDev */
-+
-+ HalDev->RxTeardownPending[Ch] &= ~RX_TEARDOWN;
-+
-+ HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
-+
-+ /* call OS Teardown Complete (if TX is also done) */
-+ if ((HalDev->TxTeardownPending[Ch] & TX_TEARDOWN) == 0)
-+ {
-+ /* mark channel as closed */
-+ HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
-+
-+ /* disable channel interrupt */
-+ SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
-+ SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<(Ch+16)); /* +GSG 030307 */
-+ SAR_RX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
-+
-+ /* Clear PDSP Channel State RAM */
-+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+(Ch*64));
-+ for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++)
-+ *pTmp++ = 0;
-+
-+ if ((HalDev->RxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
-+ {
-+
-+ HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX|DIRECTION_RX);
-+ }
-+ /* clear all teardown pending information for this channel */
-+ HalDev->RxTeardownPending[Ch] = 0;
-+ HalDev->TxTeardownPending[Ch] = 0;
-+ }
-+
-+ return (EC_NO_ERRORS);
-+ }
-+ return (-1);
-+ }
-+
-+/* return of 0 means that this code executed, -1 means the interrupt was not
-+ a teardown interrupt */
-+static int TxTeardownInt(HAL_DEVICE *HalDev, int Ch, int Queue)
-+ {
-+ bit32u base = HalDev->dev_base;
-+ HAL_TCB *Last, *Curr, *First; /*+GSG 030303*/
-+
-+ int i;
-+ volatile bit32u *pTmp;
-+
-+ if (((*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue ))) & TEARDOWN_VAL) == TEARDOWN_VAL)
-+ {
-+ /* return outstanding buffers to OS +RC3.02*/
-+ Curr = HalDev->TxActQueueHead[Ch][Queue]; /*+GSG 030303*/
-+ First = Curr; /*+GSG 030303*/
-+ while (Curr) /*+GSG 030303*/
-+ { /*+GSG 030303*/
-+ /* Pop TCB(s) for packet from the stack */ /*+GSG 030303*/
-+ Last = Curr->Eop; /*+GSG 030303*/
-+ HalDev->TxActQueueHead[Ch][Queue] = Last->Next; /*+GSG 030303*/
-+ /*+GSG 030303*/
-+ /* return to OS */ /*+GSG 030303*/
-+ HalDev->OsFunc->SendComplete(Curr->OsInfo); /*+GSG 030303*/
-+ /*+GSG 030303*/
-+ /* Push Tcb(s) back onto the stack */ /*+GSG 030303*/
-+ Curr = Last->Next; /*+GSG 030303*/
-+ Last->Next = HalDev->TcbPool[Ch][Queue]; /*+GSG 030303*/
-+ HalDev->TcbPool[Ch][Queue] = First; /*+GSG 030303*/
-+ /*+GSG 030303*/
-+ /* set the first(SOP) pointer for the next packet */ /*+GSG 030303*/
-+ First = Curr; /*+GSG 030303*/
-+ } /*+GSG 030303*/
-+
-+ /* finish channel teardown */
-+
-+ /* save the OsInfo to pass to upper layer
-+ THIS WAS CRASHING - because it's possible that I get the teardown
-+ notification and the TcbHPool is null. In this case, the buffers
-+ to free can be found in the TxHActiveQueue. If I need to get OsInfo
-+ in the future, I can get it from one of those buffers.
-+ OsInfo = HalDev->TcbHPool[Ch]->OsInfo; */
-+
-+ if (HalDev->TxTeardownPending[Ch] & FULL_TEARDOWN)
-+ {
-+ FreeTx(HalDev, Ch, Queue);
-+ } /* if FULL teardown */
-+
-+ /* bug fix - clear Tx channel pointers on teardown */
-+ HalDev->TcbPool[Ch][Queue] = 0;
-+ HalDev->TxActQueueHead[Ch][Queue] = 0;
-+ HalDev->TxActQueueCount[Ch][Queue] = 0;
-+ HalDev->TxActive[Ch][Queue] = FALSE;
-+
-+ /* write completion pointer */
-+ (*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue ))) = TEARDOWN_VAL;
-+
-+ /* no longer pending teardown */
-+ HalDev->TxTeardownPending[Ch] &= ~TX_TEARDOWN;
-+
-+ HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0;
-+
-+ /* call OS Teardown Complete (if Rx is also done) */
-+ if ((HalDev->RxTeardownPending[Ch] & RX_TEARDOWN) == 0)
-+ {
-+ /* mark channel as closed */
-+ HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0;
-+
-+ /* disable channel interrupt */
-+ SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
-+ SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<(Ch+16)); /* +GSG 030307 */
-+ SAR_RX_MASK_CLR(HalDev->dev_base) = (1<<Ch);
-+
-+ /* Clear PDSP Channel State RAM */
-+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+(Ch*64));
-+ for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++)
-+ *pTmp++ = 0;
-+
-+ if ((HalDev->TxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0)
-+ {
-+
-+ HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX|DIRECTION_RX);
-+ }
-+
-+ /* clear all teardown pending information for this channel */
-+ HalDev->RxTeardownPending[Ch] = 0;
-+ HalDev->TxTeardownPending[Ch] = 0;
-+ }
-+
-+ return (EC_NO_ERRORS);
-+ }
-+ return (-1);
-+ }
-+
-+/* +GSG 030421 */
-+static void AddToRxQueue(HAL_DEVICE *HalDev, HAL_RCB *FirstRcb, HAL_RCB *LastRcb, int FragCount, int Ch)
-+ {
-+ HAL_RCB *OldTailRcb;
-+
-+ if (HalDev->RxActQueueCount[Ch]==0)
-+ {
-+
-+ HalDev->RxActQueueHead[Ch]=FirstRcb;
-+ HalDev->RxActQueueTail[Ch]=LastRcb;
-+ HalDev->RxActQueueCount[Ch]=FragCount;
-+ if ((!HalDev->InRxInt[Ch])&&(!HalDev->RxActive[Ch]))
-+ {
-+ /* write Rx Queue Head Descriptor Pointer */
-+ (*(pRX_DMA_STATE_WORD_1( HalDev->dev_base )+( Ch *64))) = VirtToPhys(FirstRcb) - HalDev->offset;
-+ HalDev->RxActive[Ch]=TRUE;
-+ }
-+ }
-+ else
-+ {
-+
-+ OldTailRcb=HalDev->RxActQueueTail[Ch];
-+ OldTailRcb->Next=(void *)FirstRcb;
-+
-+ /* Emerald fix 10/29 (Denis) */
-+ *((bit32u *) VirtToVirtNoCache(&OldTailRcb->HNext))=VirtToPhys(FirstRcb) - HalDev->offset;
-+
-+ HalDev->RxActQueueTail[Ch]=LastRcb;
-+ HalDev->RxActQueueCount[Ch]+=FragCount;
-+ }
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * This function is called to indicate to the CPHAL that the upper layer
-+ * software has finished processing the receive data (given to it by
-+ * osReceive()). The CPHAL will then return the appropriate receive buffers
-+ * and buffer descriptors to the available pool.
-+ *
-+ * @param HalReceiveInfo Start of receive buffer descriptor chain returned to
-+ * CPHAL.
-+ * @param StripFlag Flag indicating whether the upper layer software has
-+ * retained ownership of the receive data buffers.
-+ *<BR>
-+ * 'FALSE' means that the CPHAL can reuse the receive data buffers.
-+ *<BR>
-+ * 'TRUE' : indicates the data buffers were retained by the OS
-+ *<BR>
-+ * NOTE: If StripFlag is TRUE, it is the responsibility of the upper layer software to free the buffers when they are no longer needed.
-+ *
-+ * @return EC_NO_ERRORS (ok). <BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ * @ref EC_VAL_RCB_NEEDS_BUFFER "EC_VAL_RCB_NEEDS_BUFFER"<BR>
-+ * @ref EC_VAL_RCB_DROPPED "EC_VAL_RCB_DROPPED"<BR>
-+ */
-+static int halRxReturn(HAL_RECEIVEINFO *HalReceiveInfo,
-+ int StripFlag)
-+ {
-+ int Ch = HalReceiveInfo->Ch, i;
-+ HAL_RCB *LastRcb, *TempRcb;
-+ char *pBuf;
-+ HAL_RCB *CurrHeadRcb = HalReceiveInfo, *LastGoodRcb=0; /* +GSG 030421 */
-+ HAL_DEVICE *HalDev = HalReceiveInfo->HalDev;
-+ int RcbSize = HalDev->ChData[Ch].RxBufSize;
-+ int FragCount = HalReceiveInfo->FragCount;
-+ int rc=0; /*MJH+030417*/
-+ int GoodCount=0; /*GSG+030421*/
-+
-+ if (HalDev->State != enOpened)
-+ return(EC_AAL5 |EC_FUNC_RXRETURN|EC_VAL_INVALID_STATE);
-+
-+ LastRcb=(HAL_RCB *)HalReceiveInfo->Eop;
-+ LastRcb->HNext=0;
-+ LastRcb->Next=0;
-+
-+ if (FragCount>1)
-+ {
-+ LastRcb->Off_BLen=RcbSize;
-+ LastRcb->mode=CB_OWNERSHIP_BIT;
-+ }
-+
-+ HalReceiveInfo->Off_BLen=RcbSize;
-+ HalReceiveInfo->mode=CB_OWNERSHIP_BIT;
-+
-+ /* If OS has kept the buffers for this packet, attempt to alloc new buffers */
-+ if (StripFlag)
-+ {
-+ TempRcb = HalReceiveInfo;
-+ for (i=0; i<FragCount; i++)
-+ {
-+ if (TempRcb == 0)
-+ {
-+ dbgPrintf("Rx Return error while allocating new buffers\n");
-+ dbgPrintf("Rcb = %08x, Rcb->Eop = %08x, FragCount = %d:%d\n",
-+ (bit32u)HalReceiveInfo, (bit32u)HalReceiveInfo->Eop, FragCount,i);
-+ osfuncSioFlush();
-+
-+ return(EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_CORRUPT_RCB_CHAIN);
-+ }
-+
-+ /* size = ((RcbSize+15) & ~15) + 15;*/ /*-3.01b*/
-+ /*size = RcbSize + 15;*/ /* -GSG 030421 */
-+ pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(RcbSize,0,
-+ 0xF,HalDev->ChData[Ch].OsSetup,
-+ (void *)TempRcb,
-+ (void *)&TempRcb->OsInfo,
-+ (void *) HalDev->OsDev);
-+ if (!pBuf)
-+ {
-+ /* malloc failed, add this RCB to Needs Buffer List */
-+ TempRcb->FragCount = 1; /*MJH+030417*/
-+ (HAL_RCB *)TempRcb->Eop = TempRcb; /* GSG +030430 */
-+
-+ if(HalDev->NeedsCount < MAX_NEEDS) /* +MJH 030410 */
-+ { /* +MJH 030410 */
-+ HalDev->Needs[HalDev->NeedsCount] = (HAL_RECEIVEINFO *) TempRcb; /* +MJH 030410 */
-+ HalDev->NeedsCount++; /* +MJH 030410 */
-+ rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_NEEDS_BUFFER); /* ~MJH 030417 */
-+ } /* +MJH 030410 */
-+ else /* +MJH 030410 */
-+ rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_DROPPED); /* ~MJH 030417 */
-+
-+ /* requeue any previous RCB's that were ready to go before this one */
-+ if (GoodCount > 0) /* +GSG 030421 */
-+ { /* +GSG 030421 */
-+ LastGoodRcb->HNext=0; /* +GSG 030430 */
-+ LastGoodRcb->Next=0; /* +GSG 030430 */
-+ osfuncDataCacheHitWriteback((void *)LastGoodRcb, 16); /* +GSG 030430 */
-+
-+ AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch); /* +GSG 030421 */
-+ GoodCount = 0; /* +GSG 030421 */
-+ } /* +GSG 030421 */
-+
-+ CurrHeadRcb = TempRcb->Next; /* +GSG 030421 */
-+ }
-+ else /* +GSG 030421 */
-+ { /* +GSG 030421 */
-+ /* malloc succeeded, requeue the RCB to the hardware */
-+ TempRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
-+ TempRcb->DatPtr=pBuf;
-+ /* Emerald fix 10/29 */
-+ osfuncDataCacheHitWriteback((void *)TempRcb, 16);
-+
-+ /* i store the last good RCB in case the malloc fails for the
-+ next fragment. This ensures that I can go ahead and return
-+ a partial chain of RCB's to the hardware */
-+ LastGoodRcb = TempRcb; /* +GSG 030421 */
-+ GoodCount++; /* +GSG 030421 */
-+ } /* +GSG 030421 */
-+ TempRcb = TempRcb->Next;
-+ } /* end of Frag loop */
-+ /* if there any good RCB's to requeue, do so here */
-+ if (GoodCount > 0) /* +GSG 030421 */
-+ {
-+ AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch); /* +GSG 030421 */
-+ }
-+ return(rc); /* ~GSG 030421 */
-+ }
-+ else
-+ {
-+ /* Not Stripping */
-+ /* Emerald */
-+ /* Write Back SOP and last RCB */
-+ osfuncDataCacheHitWriteback((void *)HalReceiveInfo, 16);
-+
-+ if (FragCount > 1)
-+ {
-+ osfuncDataCacheHitWriteback((void *)LastRcb, 16);
-+ }
-+ /* if not stripping buffers, always add to queue */
-+ AddToRxQueue(HalDev, HalReceiveInfo, LastRcb, FragCount, Ch); /*MJH~030520*/
-+ }
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/* +MJH 030410
-+ Trys to liberate an RCB until liberation fails.
-+ Note: If liberation fails then RxReturn will re-add the RCB to the
-+ Needs list.
-+*/
-+static void NeedsCheck(HAL_DEVICE *HalDev)
-+{
-+ HAL_RECEIVEINFO* HalRcb;
-+ int rc;
-+ HalDev->OsFunc->CriticalOn();
-+ while(HalDev->NeedsCount)
-+ {
-+ HalDev->NeedsCount--;
-+ HalRcb = HalDev->Needs[HalDev->NeedsCount];
-+ rc = halRxReturn(HalRcb, 1);
-+ /* short circuit if RxReturn starts to fail */
-+ if (rc != 0)
-+ break;
-+ }
-+ HalDev->OsFunc->CriticalOff();
-+}
-+
-+/*
-+ * This function allocates transmit buffer descriptors (internal CPHAL function).
-+ * It creates a high priority transmit queue by default for a single Tx
-+ * channel. If QoS is enabled for the given CPHAL device, this function
-+ * will also allocate a low priority transmit queue.
-+ *
-+ * @param HalDev CPHAL module instance. (set by cphalInitModule())
-+ * @param Ch Channel number.
-+ *
-+ * @return 0 OK, Non-Zero Not OK
-+ */
-+static int InitTcb(HAL_DEVICE *HalDev, int Ch)
-+ {
-+ int i, Num = HalDev->ChData[Ch].TxNumBuffers;
-+ HAL_TCB *pTcb=0;
-+ char *AllTcb;
-+ int tcbSize, Queue;
-+ int SizeMalloc;
-+
-+ tcbSize = (sizeof(HAL_TCB)+0xf)&~0xf;
-+ SizeMalloc = (tcbSize*Num)+0xf;
-+
-+ for (Queue=0; Queue < HalDev->ChData[Ch].TxNumQueues; Queue++)
-+ {
-+ if (HalDev->TcbStart[Ch][Queue] == 0)
-+ {
-+
-+ /* malloc all TCBs at once */
-+ AllTcb = (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
-+ if (!AllTcb)
-+ {
-+ return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_TCB_MALLOC_FAILED);
-+ }
-+
-+ HalDev->OsFunc->Memset(AllTcb, 0, SizeMalloc);
-+
-+ /* keep this address for freeing later */
-+ HalDev->TcbStart[Ch][Queue] = AllTcb;
-+ }
-+ else
-+ {
-+ /* if the memory has already been allocated, simply reuse it! */
-+ AllTcb = HalDev->TcbStart[Ch][Queue];
-+ }
-+
-+ /* align to cache line */
-+ AllTcb = (char *)(((bit32u)AllTcb + 0xf) &~ 0xf); /*PITS #143 MJH~030522*/
-+
-+ /* default High priority transmit queue */
-+ HalDev->TcbPool[Ch][Queue]=0;
-+ for(i=0;i<Num;i++)
-+ {
-+ /*pTcb=(HAL_TCB *) OsFunc->MallocDmaXfer(sizeof(HAL_TCB),0,0xffffffff); */
-+ pTcb= (HAL_TCB *)(AllTcb + (i*tcbSize));
-+ pTcb->mode=0;
-+ pTcb->BufPtr=0;
-+ pTcb->Next=HalDev->TcbPool[Ch][Queue];
-+ pTcb->Off_BLen=0;
-+ HalDev->TcbPool[Ch][Queue]=pTcb;
-+ }
-+ /*HalDev->TcbEnd = pTcb;*/
-+ }
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/*
-+ * This function allocates receive buffer descriptors (internal CPHAL function).
-+ * After allocation, the function 'queues' (gives to the hardware) the newly
-+ * created receive buffers to enable packet reception.
-+ *
-+ * @param HalDev CPHAL module instance. (set by cphalInitModule())
-+ * @param Ch Channel number.
-+ *
-+ * @return 0 OK, Non-Zero Not OK
-+ */
-+static int InitRcb(HAL_DEVICE *HalDev, int Ch)
-+ {
-+ int i, Num = HalDev->ChData[Ch].RxNumBuffers;
-+ int Size = HalDev->ChData[Ch].RxBufSize;
-+ HAL_RCB *pRcb;
-+ char *pBuf;
-+ char *AllRcb;
-+ int rcbSize;
-+ int DoMalloc = 0;
-+ int SizeMalloc;
-+ int MallocSize;
-+
-+ rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf;
-+ SizeMalloc = (rcbSize*Num)+0xf;
-+
-+ if (HalDev->RcbStart[Ch] == 0)
-+ {
-+ DoMalloc = 1;
-+
-+ /* malloc all RCBs at once */
-+ AllRcb= (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff);
-+ if (!AllRcb)
-+ {
-+ return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RCB_MALLOC_FAILED);
-+ }
-+
-+ HalDev->OsFunc->Memset(AllRcb, 0, SizeMalloc);
-+
-+ /* keep this address for freeing later */
-+ HalDev->RcbStart[Ch] = AllRcb;
-+ }
-+ else
-+ {
-+ /* if the memory has already been allocated, simply reuse it! */
-+ AllRcb = HalDev->RcbStart[Ch];
-+ }
-+
-+ /* align to cache line */
-+ AllRcb = (char *)(((bit32u)AllRcb + 0xf)&~0xf); /*PITS #143 MJH~030522*/
-+
-+ HalDev->RcbPool[Ch]=0;
-+ for(i=0;i<Num;i++)
-+ {
-+ pRcb = (HAL_RCB *)(AllRcb + (i*rcbSize));
-+
-+ if (DoMalloc == 1)
-+ {
-+
-+ MallocSize = Size; /*~3.01 */
-+ pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(MallocSize,0,0xF,HalDev->ChData[Ch].OsSetup, (void *)pRcb, (void *)&pRcb->OsInfo, (void *) HalDev->OsDev);
-+ if(!pBuf)
-+ {
-+ return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RX_BUFFER_MALLOC_FAILED);
-+ }
-+ /* -RC3.01 pBuf = (char *)(((bit32u)pBuf+0xF) & ~0xF); */
-+ pRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset;
-+ pRcb->DatPtr=pBuf;
-+ /*pRcb->BufSize=Size;*/
-+ }
-+ pRcb->mode=0;
-+ pRcb->Ch=Ch;
-+ pRcb->Next=(void *)HalDev->RcbPool[Ch];
-+ pRcb->Off_BLen=0;
-+ pRcb->HalDev = HalDev;
-+ HalDev->RcbPool[Ch]=pRcb;
-+ }
-+
-+ /* Give all of the Rx buffers to hardware */
-+
-+ while(HalDev->RcbPool[Ch])
-+ {
-+ pRcb=HalDev->RcbPool[Ch];
-+ HalDev->RcbPool[Ch]=pRcb->Next;
-+ pRcb->Eop=(void*)pRcb;
-+ pRcb->FragCount=1;
-+ halRxReturn((HAL_RECEIVEINFO *)pRcb, 0);
-+ }
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * This function transmits the data in FragList using available transmit
-+ * buffer descriptors. More information on the use of the Mode parameter
-+ * is available in the module-specific appendices. Note: The OS should
-+ * not call Send() for a channel that has been requested to be torndown.
-+ *
-+ * @param HalDev CPHAL module instance. (set by cphalInitModule())
-+ * @param FragList Fragment List structure.
-+ * @param FragCount Number of fragments in FragList.
-+ * @param PacketSize Number of bytes to transmit.
-+ * @param OsSendInfo OS Send Information structure. <BR>
-+ * @param Mode 32-bit value with the following bit fields: <BR>
-+ * 31-16: Mode (used for module specific data). <BR>
-+ * 15-08: Queue (transmit queue to send on). <BR>
-+ * 07-00: Channel (channel number to send on).
-+ *
-+ * @return EC_NO_ERRORS (ok). <BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ * @ref EC_VAL_NOT_LINKED "EC_VAL_NOT_LINKED"<BR>
-+ * @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
-+ * @ref EC_VAL_OUT_OF_TCBS "EC_VAL_OUT_OF_TCBS"<BR>
-+ * @ref EC_VAL_NO_TCBS "EC_VAL_NO_TCBS"<BR>
-+ */
-+static int halSend(HAL_DEVICE *HalDev,FRAGLIST *FragList,
-+ int FragCount,int PacketSize, OS_SENDINFO *OsSendInfo,
-+ bit32u Mode)
-+ {
-+ HAL_TCB *tcb_ptr, *head;
-+ int i;
-+ bit32u base = HalDev->dev_base;
-+ int rc = EC_NO_ERRORS;
-+ int Ch = Mode & 0xFF;
-+ int Queue = (Mode>>8)&0xFF;
-+
-+ int WaitFlag = (Mode>>30)&1; /* This is for AAL5 testing only */ /* ~GSG 030508 */
-+ int Offset = (FragList[0].len >> 16);
-+ int PktType = (Mode>>16)&3; /* 0=AAL5, 1=Null AAL, 2=OAM, 3=Transparent */ /* +GSG 030508 */
-+ int AtmHeaderInData = (Mode>>31)&1; /* +GSG 030508 */
-+ int FragIndex = 0;
-+
-+ if (HalDev->State != enOpened)
-+ return(EC_CPPI|EC_FUNC_SEND|EC_VAL_INVALID_STATE);
-+
-+ if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0) /*MJH~030611*/ /*PITS 148*/
-+ return(EC_AAL5 |EC_FUNC_SEND|EC_VAL_INVALID_CH); /*+GSG 030303*/
-+
-+ HalDev->OsFunc->CriticalOn();
-+
-+ tcb_ptr = head = HalDev->TcbPool[Ch][Queue];
-+
-+ if (tcb_ptr)
-+ {
-+
-+ /* these two TCB words are only valid on SOP */
-+ if (AtmHeaderInData == 1)
-+ {
-+ tcb_ptr->AtmHeader = 0; /* bug fix for transparent mode PTI problem */
-+ /* Expect AtmHeader in the data */
-+ tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 24;
-+ tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 16;
-+ tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 8;
-+ tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++);
-+
-+ /* decrement data buffer length accordingly */
-+ FragList[FragIndex].len -= ATM_HEADER_SIZE;
-+
-+ /* if the first fragment was ATM Header only, go to next fragment for loop */
-+ if (FragList[FragIndex].len == 0)
-+ FragIndex++;
-+
-+ /* No CPCS_UU/CPI if not AAL5 */
-+ tcb_ptr->Word5 = ((PktType & 0x3)<<16);
-+ }
-+ else
-+ {
-+ /* calculate AtmHeader from fields */
-+ tcb_ptr->AtmHeader = atmheader(HalDev->ChData[Ch].Gfc, /* ~GSG 030306 */
-+ HalDev->ChData[Ch].Vpi, HalDev->ChData[Ch].Vci,
-+ HalDev->ChData[Ch].Pti, HalDev->ChData[Ch].Clp);
-+
-+ tcb_ptr->Word5 = HalDev->ChData[Ch].CpcsUU | ((HalDev->ChData[Ch].PktType &0x3)<<16);
-+ }
-+
-+ for (i=FragIndex; i<FragCount; i++)
-+
-+ {
-+ /* Setup Tx mode and size */
-+ tcb_ptr->HNext = VirtToPhys((bit32 *)tcb_ptr->Next) - HalDev->offset;
-+ tcb_ptr->Off_BLen = FragList[i].len;
-+
-+ if (i==0)
-+ tcb_ptr->Off_BLen |= (Offset << 16);
-+
-+ tcb_ptr->mode = 0; /* MUST clear this for each frag !!! */
-+ tcb_ptr->BufPtr = VirtToPhys((bit32 *)FragList[i].data) -
-+ HalDev->offset;
-+
-+ /* first fragment */
-+ if (i == 0)
-+ {
-+ tcb_ptr->mode |= CB_SOF_BIT;
-+
-+ }
-+
-+ tcb_ptr->mode |= (PacketSize | CB_OWNERSHIP_BIT);
-+ tcb_ptr->OsInfo = OsSendInfo;
-+
-+ if (i == (FragCount - 1))
-+ {
-+ /* last fragment */
-+ tcb_ptr->mode |= CB_EOF_BIT;
-+
-+ /* since this is the last fragment, set the TcbPool pointer before
-+ nulling out the Next pointers */
-+
-+ HalDev->TcbPool[Ch][Queue] = tcb_ptr->Next;
-+
-+ tcb_ptr->Next = 0;
-+ tcb_ptr->HNext = 0;
-+
-+ /* In the Tx Interrupt handler, we will need to know which TCB is EOP,
-+ so we can save that information in the SOP */
-+ head->Eop = tcb_ptr;
-+
-+ /* Emerald fix 10/29 */
-+ osfuncDataCacheHitWriteback((void *)tcb_ptr, 16);
-+
-+ osfuncDataCacheHitWriteback((void *)((bit32u)tcb_ptr + 16), 16);
-+
-+ }
-+ else
-+ {
-+ /* Emerald fix 10/29 */
-+ osfuncDataCacheHitWriteback((void *)tcb_ptr, 16);
-+
-+ osfuncDataCacheHitWriteback((void *)((bit32u)tcb_ptr + 16), 16);
-+
-+ tcb_ptr = tcb_ptr->Next; /* what about the end of TCB list?? */
-+
-+ if (tcb_ptr == 0)
-+ {
-+ rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_OUT_OF_TCBS;
-+ goto ExitSend;
-+ }
-+ }
-+ } /* for */
-+
-+ /* put it on the high priority queue */
-+ if (HalDev->TxActQueueHead[Ch][Queue] == 0)
-+ {
-+ HalDev->TxActQueueHead[Ch][Queue]=head;
-+ HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
-+/*+GSG 030303*//*+GSG 030303*/
-+ if (!HalDev->TxActive[Ch][Queue])
-+ {
-+
-+ if (!WaitFlag)
-+ {
-+
-+ /* write CPPI TX HDP */
-+ (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( Queue ))) = VirtToPhys(head) - HalDev->offset;
-+ HalDev->TxActive[Ch][Queue]=TRUE;
-+
-+ }
-+
-+ }
-+ }
-+ else
-+ {
-+ HalDev->TxActQueueTail[Ch][Queue]->Next=head;
-+ /* Emerald fix 10/29 */
-+ *((bit32u *) VirtToVirtNoCache(&HalDev->TxActQueueTail[Ch][Queue]->HNext))=VirtToPhys(head) - HalDev->offset;
-+ HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr;
-+/*+GSG 030303*//*+GSG 030303*/
-+ }
-+ rc = EC_NO_ERRORS;
-+ goto ExitSend;
-+ } /* if (tcb_ptr) */
-+ else
-+ {
-+ rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_NO_TCBS;
-+ goto ExitSend;
-+ }
-+ExitSend:
-+
-+ HalDev->OsFunc->CriticalOff();
-+ return(rc);
-+ }
-+
-+/*
-+ * This function processes receive interrupts. It traverses the receive
-+ * buffer queue, extracting the data and passing it to the upper layer software via
-+ * osReceive(). It handles all error conditions and fragments without valid data by
-+ * immediately returning the RCB's to the RCB pool.
-+ *
-+ * @param HalDev CPHAL module instance. (set by cphalInitModule())
-+ * @param Ch Channel Number.
-+ * @param MoreWork Flag that indicates that there is more work to do when set to 1.
-+ *
-+ * @return 0 if OK, non-zero otherwise.
-+ */
-+static int RxInt(HAL_DEVICE *HalDev, int Ch, int *MoreWork)
-+ {
-+ HAL_RCB *CurrentRcb, *LastRcb=0, *SopRcb, *EofRcb, *EopRcb;
-+ bit32u RxBufStatus,PacketsServiced, RxPktLen = 0, RxSopStatus,
-+ FrmFrags, TotalFrags, CurrDmaLen, DmaLen, FrmLen;
-+ int base = HalDev->dev_base, Ret;
-+ OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+ int RxServiceMax = HalDev->ChData[Ch].RxServiceMax;
-+ int FragIndex; /* +GSG 030508 */
-+ int EarlyReturn = 0; /* +GSG 030521 */
-+
-+ bit32u PktType, ExpDmaSize, Cells;
-+ int PassHeader=0;
-+
-+ int mode;
-+
-+ bit32u SopOffset;
-+
-+ if(HalDev->NeedsCount) /* +MJH 030410 */
-+ NeedsCheck(HalDev); /* +MJH 030410 */
-+
-+ /* Handle case of teardown interrupt */
-+ if (HalDev->RxTeardownPending[Ch] != 0)
-+ {
-+ Ret = RxTeardownInt(HalDev, Ch);
-+ if (Ret == 0)
-+ { /*+GSG 030303*/
-+ *MoreWork = 0; /* bug fix 1/6 */ /*+GSG 030303*/
-+ return (EC_NO_ERRORS);
-+ } /*+GSG 030303*/
-+ }
-+
-+ CurrentRcb=HalDev->RxActQueueHead[Ch];
-+
-+ osfuncDataCacheHitInvalidate((void*)CurrentRcb, 16);
-+
-+ RxBufStatus=CurrentRcb->mode;
-+
-+ /* I think I need to do this to ensure that i read UuCpi properly,
-+ which is on the second cache line of the Rcb */
-+ osfuncDataCacheHitInvalidate((void*)((bit32u)CurrentRcb+16), 16);
-+
-+ PacketsServiced=0;
-+ HalDev->InRxInt[Ch]=TRUE;
-+
-+ while((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)&&
-+ (PacketsServiced<RxServiceMax)) /* ~GSG 030307 */
-+ {
-+
-+ PacketsServiced++; /* ~GSG 030307 */
-+ SopRcb=CurrentRcb;
-+ RxSopStatus=RxBufStatus;
-+
-+ RxPktLen = RxSopStatus&CB_SIZE_MASK;
-+ /* Not sure what MAC needs to do for next block */
-+
-+ PktType=((SopRcb->UuCpi & 0x00030000) >> 16); /* GSG ~030508 */
-+ /* Calculate the expected DMA length */
-+ if (RxPktLen != 0)
-+ {
-+ Cells=RxPktLen/48;
-+ if ((RxPktLen%48) > 40)
-+ Cells++;
-+ if (PktType == PKT_TYPE_AAL5) /* ~GSG 030508 */
-+ Cells++;
-+ ExpDmaSize=Cells*48;
-+ }
-+ else
-+ {
-+ ExpDmaSize=0;
-+ }
-+
-+ SopOffset=(SopRcb->Off_BLen&CB_OFFSET_MASK)>>16;
-+
-+ CurrDmaLen=0;
-+ FrmFrags=0;
-+ TotalFrags=0;
-+ FragIndex=0;
-+ FrmLen=0;
-+ EofRcb=0;
-+
-+/* +GSG 030508 */
-+ if ((PktType == PKT_TYPE_OAM) || (PktType == PKT_TYPE_TRANS)) /* +GSG 030508 */
-+ { /* +GSG 030508 */
-+ /* first frag is ATM Header */ /* +GSG 030508 */
-+ PassHeader = 1; /* +GSG 030508 */
-+ HalDev->fraglist[FragIndex].data = (void *)&SopRcb->AtmHeader; /* +GSG 030508 */
-+ HalDev->fraglist[FragIndex].len = 4; /* +GSG 030508 */
-+ HalDev->fraglist[FragIndex].OsInfo = SopRcb->OsInfo; /* +GSG 030701 */
-+ FragIndex++; /* +GSG 030508 */
-+ } /* +GSG 030508 */
-+/* +GSG 030508 */
-+
-+ do
-+ {
-+
-+ DmaLen=CurrentRcb->Off_BLen&CB_SIZE_MASK;
-+
-+ CurrDmaLen+=DmaLen;
-+ FrmLen+=DmaLen;
-+ TotalFrags++;
-+ if (!EofRcb)
-+ {
-+ HalDev->fraglist[FragIndex].data=((char *)CurrentRcb->DatPtr); /* ~GSG 030508 */
-+
-+ HalDev->fraglist[FragIndex].data+=((FrmFrags==0)?SopOffset:0); /* ~GSG 030508 */
-+
-+ HalDev->fraglist[FragIndex].len=DmaLen; /* ~GSG 030508 */
-+
-+ /* GSG 12/9 */
-+ HalDev->fraglist[FragIndex].OsInfo = CurrentRcb->OsInfo; /* ~GSG 030508 */
-+
-+ /* Upper layer must do the data invalidate */
-+
-+ FrmFrags++;
-+ FragIndex++; /* ~GSG 030508 */
-+ if (FrmLen>=RxPktLen)
-+ EofRcb=CurrentRcb;
-+ }
-+ LastRcb=CurrentRcb;
-+ CurrentRcb=LastRcb->Next;
-+ if (CurrentRcb)
-+ {
-+ osfuncDataCacheHitInvalidate((void*)CurrentRcb,16);
-+ /* RxBufStatus=CurrentRcb->mode; */ /*DRB~030522*/
-+ }
-+ }while(((LastRcb->mode&CB_EOF_BIT)==0)&&(CurrentRcb));
-+
-+ /* New location for interrupt acknowledge */
-+ /* Write the completion pointer */
-+ (*(pRX_CPPI_COMP_PTR( base )+( Ch *64))) = VirtToPhys(LastRcb) - HalDev->offset;
-+
-+ EopRcb=LastRcb;
-+ HalDev->RxActQueueHead[Ch]=CurrentRcb;
-+ HalDev->RxActQueueCount[Ch]-=TotalFrags;
-+
-+ if (LastRcb->mode&CB_EOQ_BIT)
-+ {
-+ if (CurrentRcb)
-+ {
-+
-+ HalDev->Stats.RxMisQCnt[Ch]++;
-+
-+ (*(pRX_DMA_STATE_WORD_1( base )+( Ch *64))) = LastRcb->HNext;
-+ }
-+ else
-+ {
-+
-+ /* Rx EOQ */
-+ HalDev->Stats.RxMisQCnt[Ch]++;
-+
-+ HalDev->RxActive[Ch]=FALSE;
-+ }
-+ }
-+
-+ EopRcb->Next=0;
-+
-+ /* setup SopRcb for the packet */
-+ SopRcb->Eop=(void*)EopRcb;
-+ SopRcb->FragCount=TotalFrags;
-+
-+ if ((ExpDmaSize!=CurrDmaLen)||(RxSopStatus&RX_ERROR_MASK))
-+ {
-+ /* check for Rx errors (only valid on SOP) */
-+ if (RxSopStatus & RX_ERROR_MASK)
-+ {
-+ if (RxSopStatus & CRC_ERROR_MASK)
-+ HalDev->Stats.CrcErrors[Ch]++;
-+
-+ if (RxSopStatus & LENGTH_ERROR_MASK)
-+ HalDev->Stats.LenErrors[Ch]++;
-+
-+ if (RxSopStatus & ABORT_ERROR_MASK)
-+ HalDev->Stats.AbortErrors[Ch]++;
-+
-+ if (RxSopStatus & STARV_ERROR_MASK)
-+ HalDev->Stats.StarvErrors[Ch]++;
-+ }
-+ else
-+ {
-+ HalDev->Stats.DmaLenErrors[Ch]++; /* different type of length error */
-+ }
-+
-+ EarlyReturn = 1;
-+ }
-+
-+ /* do not pass up the packet if we're out of RCB's (or have an errored packet)*/
-+ if ((CurrentRcb == 0) || (EarlyReturn == 1))
-+ {
-+ halRxReturn((HAL_RECEIVEINFO *)SopRcb,0);
-+ }
-+ else
-+ {
-+
-+ if (EopRcb!=EofRcb)
-+ {
-+ HAL_RCB *FirstEmptyRcb;
-+
-+ FirstEmptyRcb = EofRcb->Next;
-+ FirstEmptyRcb->Eop = (void*)EopRcb;
-+ FirstEmptyRcb->FragCount = TotalFrags-FrmFrags;
-+
-+ halRxReturn((HAL_RECEIVEINFO *)FirstEmptyRcb,0);
-+ SopRcb->Eop=(void*)EofRcb;
-+ SopRcb->FragCount=FrmFrags;
-+ EofRcb->Next=0; /* Optional */
-+ }
-+
-+ mode = Ch | (PktType << 16) | (PassHeader << 31); /* ~GSG 030508 */
-+
-+ OsFunc->Receive(HalDev->OsDev,HalDev->fraglist,FragIndex,RxPktLen, /* ~GSG 030508 */
-+ (HAL_RECEIVEINFO *)SopRcb,mode);
-+ } /* else */
-+
-+ if (CurrentRcb) /*MJH+030522*/
-+ {
-+ RxBufStatus=CurrentRcb->mode;
-+ }
-+ } /* while */
-+
-+ if ((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)) /*~GSG 030307*/
-+ {
-+ *MoreWork = 1;
-+ }
-+ else
-+ {
-+ *MoreWork = 0;
-+ }
-+
-+ if (PacketsServiced != 0)
-+ {
-+ /* REMOVED when removing InRxInt */
-+ if ((!HalDev->RxActive[Ch]) && (HalDev->RxActQueueCount[Ch]))
-+ {
-+ (*(pRX_DMA_STATE_WORD_1( base )+( Ch *64))) = VirtToPhys(HalDev->RxActQueueHead[Ch]);
-+ HalDev->RxActive[Ch]=TRUE;
-+ }
-+ }
-+
-+ HalDev->InRxInt[Ch]=FALSE;
-+
-+ /* update stats */
-+ HalDev->Stats.RxPacketsServiced[Ch] += PacketsServiced;
-+ HalDev->Stats.RxTotal += PacketsServiced;
-+ if (HalDev->Stats.RxMaxServiced < PacketsServiced)
-+ HalDev->Stats.RxMaxServiced = PacketsServiced;
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/*
-+ * This function processes transmit interrupts. It traverses the
-+ * transmit buffer queue, detecting sent data buffers and notifying the upper
-+ * layer software via osSendComplete(). (for SAR, i originally had this split
-+ * into two functions, one for each queue, but joined them on 8/8/02)
-+ *
-+ * @param HalDev CPHAL module instance. (set by cphalInitModule())
-+ * @param Queue Queue number to service (always 0 for MAC, Choose 1 for SAR to service low priority queue)
-+ * @param MoreWork Flag that indicates that there is more work to do when set to 1.
-+ *
-+ * @return 0 if OK, non-zero otherwise.
-+ */
-+static int TxInt(HAL_DEVICE *HalDev, int Ch, int Queue, int *MoreWork)
-+ {
-+ HAL_TCB *CurrentTcb,*LastTcbProcessed,*FirstTcbProcessed;
-+ int PacketsServiced;
-+ bit32u TxFrameStatus;
-+ int base = HalDev->dev_base, Ret;
-+ int TxServiceMax = HalDev->ChData[Ch].TxServiceMax;
-+ OS_FUNCTIONS *OsFunc = HalDev->OsFunc;
-+
-+ int OtherQueue = Queue^1;
-+
-+/*+GSG 030303*//*+GSG 030303*/
-+
-+ /* Handle case of teardown interrupt. This must be checked at
-+ the top of the function rather than the bottom, because
-+ the normal data processing can wipe out the completion
-+ pointer which is used to determine teardown complete. */
-+ if (HalDev->TxTeardownPending[Ch] != 0)
-+ {
-+ Ret = TxTeardownInt(HalDev, Ch, Queue);
-+ if (Ret == 0)
-+ { /*+GSG 030303*/
-+ *MoreWork = 0; /* bug fix 1/6 */ /*+GSG 030303*/
-+ return (EC_NO_ERRORS);
-+ } /*+GSG 030303*/
-+ }
-+
-+ CurrentTcb = HalDev->TxActQueueHead[Ch][Queue];
-+ FirstTcbProcessed=CurrentTcb;
-+
-+ if (CurrentTcb==0)
-+ {
-+ /* I saw this error a couple of times when multi-channels were added */
-+ dbgPrintf("[cppi TxInt()]TxH int with no TCB in queue!\n");
-+ dbgPrintf(" Ch=%d, CurrentTcb = 0x%08x\n", Ch, (bit32u)CurrentTcb);
-+ dbgPrintf(" HalDev = 0x%08x\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ return(EC_CPPI|EC_FUNC_TXINT|EC_VAL_NULL_TCB);
-+ }
-+
-+ osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
-+ TxFrameStatus=CurrentTcb->mode;
-+ PacketsServiced=0;
-+
-+ /* should the ownership bit check be inside of the loop?? could make it a
-+ while-do loop and take this check away */
-+ if ((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
-+ {
-+ OsFunc->CriticalOn(); /* +GSG 030307 */
-+ do
-+ {
-+ /* Pop TCB(s) for packet from the stack */
-+ LastTcbProcessed=CurrentTcb->Eop;
-+
-+ /* new location for acknowledge */
-+ /* Write the completion pointer */
-+ (*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue ))) = VirtToPhys(LastTcbProcessed);
-+
-+ HalDev->TxActQueueHead[Ch][Queue] = LastTcbProcessed->Next;
-+
-+/*+GSG 030303*//*+GSG 030303*/
-+
-+ osfuncDataCacheHitInvalidate((void *)LastTcbProcessed, 16);
-+
-+ if (LastTcbProcessed->mode&CB_EOQ_BIT)
-+ {
-+ if (LastTcbProcessed->Next)
-+ {
-+ /* Misqueued packet */
-+
-+ HalDev->Stats.TxMisQCnt[Ch][Queue]++;
-+
-+ (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( Queue ))) = LastTcbProcessed->HNext;
-+ }
-+ else
-+ {
-+ /* Tx End of Queue */
-+
-+ HalDev->Stats.TxEOQCnt[Ch][Queue]++;
-+
-+ HalDev->TxActive[Ch][Queue]=FALSE;
-+ }
-+ }
-+
-+ OsFunc->SendComplete(CurrentTcb->OsInfo);
-+
-+ /* Push Tcb(s) back onto the stack */
-+ CurrentTcb = LastTcbProcessed->Next;
-+
-+ LastTcbProcessed->Next=HalDev->TcbPool[Ch][Queue];
-+
-+ HalDev->TcbPool[Ch][Queue]=FirstTcbProcessed;
-+
-+ PacketsServiced++;
-+
-+ TxFrameStatus=CB_OWNERSHIP_BIT;
-+ /* set the first(SOP) pointer for the next packet */
-+ FirstTcbProcessed = CurrentTcb;
-+ if (CurrentTcb)
-+ {
-+ osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16);
-+ TxFrameStatus=CurrentTcb->mode;
-+ }
-+
-+ }while(((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
-+ &&(PacketsServiced<TxServiceMax));
-+
-+ /* this fixes the SAR TurboDSL hardware bug (multiple queue failure) */
-+ if (HalDev->TxActive[Ch][OtherQueue])
-+ if (HalDev->TxActQueueHead[Ch][OtherQueue])
-+ if ((*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( OtherQueue ))) == 0)
-+ {
-+ osfuncDataCacheHitInvalidate(HalDev->TxActQueueHead[Ch][OtherQueue],16);
-+ if ((HalDev->TxActQueueHead[Ch][OtherQueue]->mode) & CB_OWNERSHIP_BIT)
-+ {
-+ HalDev->TurboDslErrors++;
-+ (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( OtherQueue ))) =
-+ VirtToPhys(HalDev->TxActQueueHead[Ch][OtherQueue]);
-+ }
-+ }
-+
-+ OsFunc->CriticalOff(); /* +GSG 030307 */
-+ if (((TxFrameStatus&CB_OWNERSHIP_BIT)==0)
-+ &&(PacketsServiced==TxServiceMax))
-+ {
-+ *MoreWork = 1;
-+ }
-+ else
-+ {
-+ *MoreWork = 0;
-+ }
-+ }
-+
-+ /* update stats */
-+ HalDev->Stats.TxPacketsServiced[Ch][Queue] += PacketsServiced;
-+ HalDev->Stats.TxTotal += PacketsServiced;
-+ if (HalDev->Stats.TxMaxServiced[Ch][Queue] < PacketsServiced)
-+ HalDev->Stats.TxMaxServiced[Ch][Queue] = PacketsServiced;
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * This function performs a teardown for the given channel. The value of the
-+ * Mode parameter controls the operation of the function, as documented below.
-+ *
-+ * Note: If bit 3 of Mode is set, this call is blocking, and will not return
-+ * until the teardown interrupt has occurred and been processed. While waiting
-+ * for a blocking teardown to complete, ChannelTeardown() will signal the OS
-+ * (via Control(.."Sleep"..)) to allow the OS to perform other tasks if
-+ * necessary. If and only if bit 3 of Mode is clear, the CPHAL will call the
-+ * OS TeardownComplete() function to indicate that the teardown has completed.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param Ch Channel number.
-+ * @param Mode Bit 0 (LSB): Perform Tx teardown (if set).<BR>
-+ * Bit 1: Perform Rx teardown (if set). <BR>
-+ * Bit 2: If set, perform full teardown (free buffers/descriptors).
-+ * If clear, perform partial teardown (keep buffers). <BR>
-+ * Bit 3 (MSB): If set, call is blocking.
-+ * If clear, call is non-blocking.
-+ *
-+ * @return EC_NO_ERRORS (ok). <BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ * @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR>
-+ * @ref EC_VAL_TX_TEARDOWN_ALREADY_PEND "EC_VAL_TX_TEARDOWN_ALREADY_PEND"<BR>
-+ * @ref EC_VAL_RX_TEARDOWN_ALREADY_PEND "EC_VAL_RX_TEARDOWN_ALREADY_PEND"<BR>
-+ * @ref EC_VAL_TX_CH_ALREADY_TORNDOWN "EC_VAL_TX_CH_ALREADY_TORNDOWN"<BR>
-+ * @ref EC_VAL_RX_CH_ALREADY_TORNDOWN "EC_VAL_RX_CH_ALREADY_TORNDOWN"<BR>
-+ * @ref EC_VAL_TX_TEARDOWN_TIMEOUT "EC_VAL_TX_TEARDOWN_TIMEOUT"<BR>
-+ * @ref EC_VAL_RX_TEARDOWN_TIMEOUT "EC_VAL_RX_TEARDOWN_TIMEOUT"<BR>
-+ * @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR>
-+ */
-+static int halChannelTeardown(HAL_DEVICE *HalDev, int Ch, bit32 Mode)
-+ {
-+ int DoTx, DoRx, Sleep=2048, timeout=0; /*MJH~030306*/
-+ bit32u base = HalDev->dev_base;
-+
-+/* Set the module, used for error returns */
-+
-+ int Ret;
-+
-+ /* AAL5 only supports tearing down both sides at once (currently)*/
-+ Mode = (Mode | TX_TEARDOWN | RX_TEARDOWN);
-+
-+ DoTx = (Mode & TX_TEARDOWN);
-+ DoRx = (Mode & RX_TEARDOWN);
-+
-+ if (HalDev->State < enInitialized)
-+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_STATE);
-+
-+ if ((Ch < 0) || (Ch > MAX_AAL5_CHAN ))
-+ {
-+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH);
-+ }
-+
-+ /* set teardown pending bits before performing the teardown, because they
-+ will be used in the int handler (this is done for AAL5) */
-+ if (DoTx)
-+ {
-+ if (HalDev->TxTeardownPending[Ch] != 0)
-+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_ALREADY_PEND);
-+
-+ /* If a full teardown, this also means that the user must
-+ setup all channels again to use them */
-+ if (Mode & FULL_TEARDOWN)
-+ HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
-+
-+ if (HalDev->State < enOpened)
-+ {
-+ /* if the hardware has never been opened, the channel has never actually
-+ been setup in the hardware, so I just need to reset the software flag
-+ and leave */
-+ HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0;
-+ return (EC_NO_ERRORS);
-+ }
-+ else
-+ {
-+ if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0)
-+ {
-+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_CH_ALREADY_TORNDOWN);
-+ }
-+
-+ /* set teardown flag */
-+ HalDev->TxTeardownPending[Ch] = Mode;
-+ }
-+ }
-+
-+ if (DoRx)
-+ {
-+ if (HalDev->RxTeardownPending[Ch] != 0)
-+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_ALREADY_PEND);
-+
-+ if (Mode & FULL_TEARDOWN)
-+ HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
-+
-+ if (HalDev->State < enOpened)
-+ {
-+ HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0;
-+ return (EC_NO_ERRORS);
-+ }
-+ else
-+ {
-+ if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == 0)
-+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_CH_ALREADY_TORNDOWN);
-+
-+ HalDev->RxTeardownPending[Ch] = Mode;
-+ }
-+ }
-+
-+ /* Perform Tx Teardown Duties */
-+ if ((DoTx) && (HalDev->State == enOpened))
-+ {
-+ /* Request TX channel teardown */
-+ (TX_CPPI_TEARDOWN_REG( base )) = Ch;
-+
-+ /* wait until teardown has completed */
-+ if (Mode & BLOCKING_TEARDOWN)
-+ {
-+ timeout = 0;
-+ while (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
-+ {
-+ osfuncSleep(&Sleep);
-+
-+ timeout++;
-+ if (timeout > 100000)
-+ {
-+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_TIMEOUT);
-+ }
-+ }
-+ }
-+ } /* if DoTx */
-+
-+ /* Perform Rx Teardown Duties */
-+ if ((DoRx) && (HalDev->State == enOpened))
-+ {
-+
-+ /* call main teardown routine for Rx */
-+ Ret = HalDev->SarFunc->ChannelTeardown(HalDev->SarDev, Ch, Mode);
-+ if (Ret) return (Ret);
-+
-+ if (Mode & BLOCKING_TEARDOWN)
-+ {
-+ timeout = 0;
-+ while (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
-+ {
-+ osfuncSleep(&Sleep);
-+
-+ timeout++;
-+ if (timeout > 100000)
-+ {
-+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_TIMEOUT);
-+ }
-+ }
-+ }
-+ } /* if DoRx */
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/**
-+ * @ingroup CPHAL_Functions
-+ * This function closes the CPHAL module. The module will be reset.
-+ * The Mode parameter should be used to determine the actions taken by
-+ * Close().
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ * @param Mode Indicates actions to take on close. The following integer
-+ * values are valid: <BR>
-+ * 1: Does not free buffer resources, init parameters remain
-+ * intact. User can then call Open() without calling Init()
-+ * to attempt to reset the device and bring it back to the
-+ * last known state.<BR>
-+ * 2: Frees the buffer resources, but keeps init parameters. This
-+ * option is a more aggressive means of attempting a device reset.
-+ * 3: Frees the buffer resources, and clears all init parameters. <BR>
-+ * At this point, the caller would have to call to completely
-+ * reinitialize the device (Init()) before being able to call
-+ * Open(). Use this mode if you are shutting down the module
-+ * and do not plan to restart.
-+ *
-+ * @return EC_NO_ERRORS (ok).<BR>
-+ * Possible Error Codes:<BR>
-+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR>
-+ * Any error code from halChannelTeardown().<BR>
-+ */
-+static int halClose(HAL_DEVICE *HalDev, bit32 Mode)
-+ {
-+ int Ch, Inst, Ret;
-+ OS_DEVICE *TmpOsDev;
-+ OS_FUNCTIONS *TmpOsFunc;
-+ HAL_FUNCTIONS *TmpHalFunc;
-+ char *TmpDeviceInfo;
-+
-+ CPSAR_FUNCTIONS *TmpSarFunc;
-+ CPSAR_DEVICE *TmpSarDev;
-+
-+ /* Verify proper device state */
-+ if (HalDev->State != enOpened)
-+ return (EC_AAL5 | EC_FUNC_CLOSE|EC_VAL_INVALID_STATE);
-+
-+ /* Teardown all open channels */
-+ for (Ch = 0; Ch <= MAX_AAL5_CHAN ; Ch++)
-+ {
-+ if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE)
-+ {
-+ if (Mode == 1)
-+ {
-+ Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
-+ if (Ret) return (Ret);
-+ }
-+ else
-+ {
-+ Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
-+ if (Ret) return (Ret);
-+ }
-+ }
-+
-+ if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)
-+ {
-+ if (Mode == 1)
-+ {
-+ Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN);
-+ if (Ret) return (Ret);
-+ }
-+ else
-+ {
-+ Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN);
-+ if (Ret) return (Ret);
-+ }
-+ }
-+ }
-+
-+ /* free fraglist in HalDev */
-+ HalDev->OsFunc->Free(HalDev->fraglist);
-+ HalDev->fraglist = 0;
-+
-+ /* unregister the interrupt */
-+ HalDev->OsFunc->IsrUnRegister(HalDev->OsDev, HalDev->interrupt);
-+
-+ /* Disable the Tx CPPI DMA */
-+ TX_CPPI_CTL_REG(HalDev->dev_base) = 0;
-+
-+ /* Disable the Rx CPPI DMA */
-+ RX_CPPI_CTL_REG(HalDev->dev_base) = 0;
-+
-+ /* Close the SAR hardware - puts the device in reset if this module is the
-+ "last one out" */
-+ HalDev->SarFunc->Close(HalDev->SarDev, Mode);
-+
-+ /* If mode is 3, than clear the HalDev and set next state to DevFound*/
-+ if (Mode == 3)
-+ {
-+ /* I need to keep the HalDev parameters that were setup in InitModule */
-+ TmpOsDev = HalDev->OsDev;
-+ TmpOsFunc = HalDev->OsFunc;
-+ TmpDeviceInfo = HalDev->DeviceInfo;
-+
-+ TmpSarFunc = HalDev->SarFunc;
-+ TmpSarDev = HalDev->SarDev;
-+
-+ TmpHalFunc = HalDev->HalFuncPtr;
-+ Inst = HalDev->Inst;
-+
-+ /* Clear HalDev */
-+
-+ HalDev->OsFunc->Memset(HalDev, 0, sizeof(HAL_DEVICE));
-+
-+ /* Restore key parameters */
-+ HalDev->OsDev = TmpOsDev;
-+ HalDev->OsFunc = TmpOsFunc;
-+ HalDev->DeviceInfo = TmpDeviceInfo;
-+
-+ HalDev->SarFunc = TmpSarFunc;
-+ HalDev->SarDev = TmpSarDev;
-+
-+ HalDev->HalFuncPtr = TmpHalFunc;
-+ HalDev->Inst = Inst;
-+
-+ HalDev->State = enDevFound;
-+ }
-+ else
-+ {
-+ HalDev->State = enInitialized;
-+ }
-+
-+ return(EC_NO_ERRORS);
-+ }
-diff -urN linux.old/drivers/atm/sangam_atm/cpremap_cpaal5.c linux.dev/drivers/atm/sangam_atm/cpremap_cpaal5.c
---- linux.old/drivers/atm/sangam_atm/cpremap_cpaal5.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpremap_cpaal5.c 2005-08-23 04:46:50.084845672 +0200
-@@ -0,0 +1,27 @@
-+#ifndef _INC_CPREMAP_C
-+#define _INC_CPREMAP_C
-+
-+#ifdef __ADAM2
-+static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size)
-+ {
-+ asm(" cache 17, (%0)" : : "r" (ptr));
-+ }
-+
-+static inline void osfuncDataCacheHitWriteback(void *ptr, int Size)
-+ {
-+ asm(" cache 25, (%0)" : : "r" (ptr));
-+ }
-+
-+#else
-+ #define osfuncDataCacheHitInvalidate(MemPtr, Size) HalDev->OsFunc->DataCacheHitInvalidate(MemPtr, Size)
-+ #define osfuncDataCacheHitWriteback(MemPtr, Size) HalDev->OsFunc->DataCacheHitWriteback(MemPtr, Size)
-+#endif
-+
-+/*
-+#define osfuncDataCacheHitInvalidate(ptr, Size) asm(" cache 17, (%0)" : : "r" (ptr))
-+#define osfuncDataCacheHitWriteback(ptr, Size) asm(" cache 25, (%0)" : : "r" (ptr))
-+*/
-+
-+
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/cpremap_cpsar.c linux.dev/drivers/atm/sangam_atm/cpremap_cpsar.c
---- linux.old/drivers/atm/sangam_atm/cpremap_cpsar.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpremap_cpsar.c 2005-08-23 04:46:50.084845672 +0200
-@@ -0,0 +1,27 @@
-+#ifndef _INC_CPREMAP_C
-+#define _INC_CPREMAP_C
-+
-+#ifdef __ADAM2
-+static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size)
-+ {
-+ asm(" cache 17, (%0)" : : "r" (ptr));
-+ }
-+
-+static inline void osfuncDataCacheHitWriteback(void *ptr, int Size)
-+ {
-+ asm(" cache 25, (%0)" : : "r" (ptr));
-+ }
-+
-+#else
-+ #define osfuncDataCacheHitInvalidate(MemPtr, Size) HalDev->OsFunc->DataCacheHitInvalidate(MemPtr, Size)
-+ #define osfuncDataCacheHitWriteback(MemPtr, Size) HalDev->OsFunc->DataCacheHitWriteback(MemPtr, Size)
-+#endif
-+
-+/*
-+#define osfuncDataCacheHitInvalidate(ptr, Size) asm(" cache 17, (%0)" : : "r" (ptr))
-+#define osfuncDataCacheHitWriteback(ptr, Size) asm(" cache 25, (%0)" : : "r" (ptr))
-+*/
-+
-+
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/cpsar.c linux.dev/drivers/atm/sangam_atm/cpsar.c
---- linux.old/drivers/atm/sangam_atm/cpsar.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpsar.c 2005-08-23 04:46:50.086845368 +0200
-@@ -0,0 +1,881 @@
-+/**
-+ * cpsar.c
-+ *
-+ * TNETDxxxx Software Support\n
-+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ * This file contains the HAL for the CPSAR module. In the software
-+ * architecture, the CPSAR module is used exclusively by the AAL5 and AAL2
-+ * CPHAL modules. AAL5 and AAL2 may utilize the same CPSAR instance
-+ * simulataneously.
-+ *
-+ * version
-+ * 5Sep02 Greg 1.00 Original Version created.
-+ */
-+
-+/* register files */
-+#include "cp_sar_reg.h"
-+
-+#define _CPHAL_CPSAR
-+#define _CPHAL
-+
-+#define WAIT_THRESH 200000
-+#define IRAM_SIZE 1536
-+#define MAX_INST 2
-+
-+/* OS Data Structure definition */
-+
-+typedef void OS_PRIVATE;
-+typedef void OS_DEVICE;
-+typedef void OS_SENDINFO;
-+typedef void OS_RECEIVEINFO;
-+typedef void OS_SETUP;
-+
-+/* CPHAL Data Structure definitions */
-+
-+typedef struct cpsar_device CPSAR_DEVICE;
-+typedef struct cpsar_device HAL_DEVICE;
-+typedef void HAL_RECEIVEINFO;
-+
-+#define MAX_QUEUE 2
-+#define MAX_CHAN 19
-+
-+#include "cpcommon_cpsar.h"
-+#include "cpswhal_cpsar.h"
-+#include "cpsar.h"
-+#include "cpcommon_cpsar.c"
-+
-+static CPSAR_DEVICE *CpsarDev[MAX_INST]= {0,0};
-+
-+/*
-+ * Returns statistics information.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return 0
-+ */
-+static int StatsGet3(CPSAR_DEVICE *HalDev)
-+ {
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]StatsGet3(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+ /*
-+ dbgPrintf("CPSAR General Stats:\n");
-+ DispHexStat(HalDev, "Base Address",HalDev->dev_base);
-+ DispStat(HalDev, "Offset (VLYNQ)",HalDev->offset);
-+ DispStat(HalDev, "Debug Level",HalDev->debug);
-+ DispStat(HalDev, "Instance",HalDev->Inst);
-+ DispHexStat(HalDev, "Reset Address",HalDev->ResetBase);
-+ DispStat(HalDev, "Reset Bit",HalDev->ResetBit);
-+ */
-+ return (EC_NO_ERRORS);
-+ }
-+
-+/* +GSG 030407 */
-+static void SetOamMode(HAL_DEVICE *HalDev)
-+ {
-+ int Ch;
-+ volatile bit32u *pTmp;
-+ int OamMode = (1<<8);
-+
-+ /* any configuration of OamMode affects all VC's, including AAL2 */
-+ for (Ch = 0; Ch < MAX_CHAN; Ch++)
-+ {
-+ if (Ch < 16)
-+ pTmp = (pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base) + (Ch*64));
-+ else
-+ pTmp = (pPDSP_AAL2_RX_STATE_WORD_0(HalDev->dev_base) + ((Ch-16)*64));
-+
-+ if (HalDev->OamMode == 0)
-+ {
-+ *pTmp &=~ OamMode;
-+ }
-+ else
-+ {
-+ *pTmp |= OamMode;
-+ }
-+ }
-+ }
-+
-+static int halControl(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value)
-+ {
-+ int KeyFound=0, ActionFound=0, rc=EC_NO_ERRORS, Ch; /* +RC3.02*/
-+ char *TmpKey = (char *)Key;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]halControl(HalDev:%08x, Key:%s, Action:%s, Value:%08x)\n", (bit32u)HalDev,
-+ Key, Action, (bit32u)Value);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ if (HalDev->OsFunc->Strcmpi(Key, "Debug") == 0)
-+ {
-+ KeyFound=1; /* +RC3.02*/
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1; /* +RC3.02*/
-+ HalDev->debug = *(int *)Value;
-+ }
-+ }
-+
-+ /* +GSG 030407 */
-+ if (HalDev->OsFunc->Strcmpi(Key, "OamMode") == 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+ HalDev->OamMode = *(int *)Value;
-+
-+ /* only do this if we're open */
-+ if (HalDev->OpenCount > 0)
-+ SetOamMode(HalDev);
-+ }
-+
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ {
-+ ActionFound=1;
-+ *(int *)Value = HalDev->OamMode;
-+ }
-+ }
-+
-+ if (HalDev->OsFunc->Strcmpi(Key, "Stats3") == 0)
-+ {
-+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0)
-+ StatsGet3(HalDev);
-+ }
-+
-+ /* +RC3.02 (if statement) */
-+ /* Fixes PITS #98 */
-+ if (HalDev->OsFunc->Strstr(Key, "PdspEnable") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* Configure PDSP enable bit based on Value*/
-+ if (*(int *)Value & 1)
-+ {
-+ /* enable PDSP */
-+ PDSP_CTRL_REG(HalDev->dev_base) |= 0x2;
-+ }
-+ else
-+ {
-+ /* disable PDSP */
-+ PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x2;
-+ }
-+ }
-+ }
-+
-+ if (HalDev->OsFunc->Strstr(Key, "FwdUnkVc.") != 0)
-+ {
-+ KeyFound=1;
-+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0)
-+ {
-+ ActionFound=1;
-+
-+ /* extract channel number */
-+ TmpKey += HalDev->OsFunc->Strlen("FwdUnkVc.");
-+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10);
-+
-+ /* Configure forwarding of unknown VCI/VPI cells */
-+ SAR_PDSP_FWD_UNK_VC_REG(HalDev->dev_base) = (((*(int*)Value)<<31) | Ch);
-+ }
-+ }
-+
-+ if (KeyFound == 0) /* +RC3.02 */
-+ rc = (EC_CPSAR|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND); /* +RC3.02 */
-+
-+ if (ActionFound == 0) /* +RC3.02 */
-+ rc = (EC_CPSAR|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND); /* +RC3.02 */
-+
-+ return(rc); /* ~RC3.02 */
-+ }
-+
-+/*
-+ * This function opens the specified channel.
-+ *
-+ * @param HalDev CPHAL module instance. (set by cphalInitModule())
-+ * @param Ch Channel number.
-+ *
-+ * @return 0 OK, Non-zero Not OK
-+ */
-+static int halChannelSetup(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh)
-+ {
-+ int i;
-+ int Ch = HalCh->Channel;
-+ int PdspChBlock = Ch;
-+ int PdspBlockOffset = 0;
-+ volatile bit32u *pTmp;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]halChannelSetup(HalDev:%08x, HalCh:%08x)\n", (bit32u)HalDev,
-+ (bit32u)HalCh);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Figure out the correct offset from the start of the PDSP
-+ Scratchpad RAM (starting at 0x8050 in the SAR) */
-+ if (Ch > 15)
-+ {
-+ /* this is an AAL2 channel, which are channels 16-18 */
-+ PdspChBlock = Ch - 16;
-+ /* Get the offset to the AAL2 portion of the block (in words) */
-+ PdspBlockOffset = NUM_PDSP_AAL5_STATE_WORDS + (PdspChBlock*64);
-+ /* Clear PDSP State RAM */
-+ /*pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
-+ for (i=0; i<NUM_PDSP_AAL2_STATE_WORDS; i++)
-+ *pTmp++ = 0;*/
-+ }
-+ else
-+ {
-+ /* Get the offset to the AAL5 portion of the block (in words) */
-+ PdspBlockOffset = (PdspChBlock*64);
-+ /* Clear PDSP State RAM */
-+ /*pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
-+ for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++)
-+ *pTmp++ = 0;*/
-+ }
-+
-+ /* Configure PDSP State RAM */
-+
-+ /* Setup TX PDSP State RAM */
-+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
-+ *pTmp++ = HalCh->TxVc_CellRate; /* Set the cell rate in cells/sec */
-+ *pTmp++ = HalCh->TxVc_QosType; /* Configure the QoS Type */
-+ *pTmp++ = HalCh->TxVc_Mbs; /* Set minimum burst size */
-+ *pTmp++ = 0; /* (skip a register) */
-+ *pTmp++ = HalCh->TxVc_Pcr; /* set the peak cell rate */
-+ *pTmp++ = 0; /* new addition 4.9.02 */
-+ *pTmp++ = HalCh->TxVc_AtmHeader; /* give the ATM header */
-+ *pTmp++ = (HalCh->TxVc_OamTc << 8)
-+ |(HalCh->TxVc_VpOffset); /* Set the OAM TC Path and VP Offset */
-+
-+ /* Setup RX PDSP State RAM */
-+ *pTmp++ = (HalCh->RxVc_OamCh)|
-+ (HalDev->OamMode << 8) |
-+ (HalCh->RxVc_OamToHost<<9); /* Set OAM Channel, Mode, and ToHost options */
-+ *pTmp++ = HalCh->RxVc_AtmHeader; /* ATM hdr put on firmware generated OAM */
-+ *pTmp++ = (HalCh->RxVc_VpOffset)| /* Set Rx OAM TC Path and VP Offset */
-+ (HalCh->RxVc_OamTc<<8);
-+
-+ /* Setup TX VP PDSP State RAM */
-+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset+16); /*GSG~030703 12->16 */
-+ *pTmp++ = HalCh->TxVp_AtmHeader;
-+ *pTmp++ = (HalCh->TxVp_OamTc << 8);
-+
-+ /* Setup RX VP PDSP State RAM */
-+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset+20); /*GSG~030703 16->20 */
-+ *pTmp++ = HalCh->RxVp_AtmHeader;
-+ *pTmp++ = (HalCh->RxVp_OamCh)|
-+ (HalCh->RxVp_OamTc<<8)|
-+ (HalCh->RxVp_OamToHost<<9); /* Set OAM Channel, Mode, and ToHost options */
-+ *pTmp++ = 0;
-+ *pTmp++ = HalCh->RxVp_OamVcList;
-+
-+ /* Configure forwarding of unknown VCI/VPI cells */
-+ if (HalCh->PktType == 3)
-+ SAR_PDSP_FWD_UNK_VC_REG(HalDev->dev_base) = ((HalCh->FwdUnkVc<<31)|Ch);
-+
-+ /* Configure Tx Channel Mapping Register (turn channel "ON") */
-+ TX_CH_MAPPING_REG(HalDev->dev_base) = 0x80000000 |
-+ (HalCh->DaMask << 30)
-+ | (HalCh->Priority << 24) | Ch;
-+
-+ /* Setup Rx Channel in the LUT */
-+ i=0;
-+ while (!(RX_LUT_CH_SETUP_REQ_REG(HalDev->dev_base) & 0x80000000))
-+ {
-+ if (i > WAIT_THRESH)
-+ {
-+ return(EC_CPSAR|EC_FUNC_CHSETUP|EC_VAL_LUT_NOT_READY);
-+ }
-+ else
-+ i++;
-+ }
-+
-+ /* RX LUT is ready */
-+ RX_LUT_CH_SETUP_REQ_REG(HalDev->dev_base) = (HalCh->PktType << 24) | Ch;
-+ RX_LUT_CH_SETUP_REQ_VC_REG(HalDev->dev_base) = ((HalCh->Vpi << 20) |
-+ (HalCh->Vci << 4));
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+static int halChannelTeardown(CPSAR_DEVICE *HalDev, int Ch, bit32 Mode)
-+ {
-+ int waitcnt = 0;
-+ int PdspBlockOffset = 0, i;
-+ volatile bit32u *pTmp;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]halChannelTeardown(HalDev:%08x, Ch:%d, Mode:%d\n",
-+ (bit32u)HalDev, Ch, Mode);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ if ((Ch < 0) || (Ch > MAX_CHAN))
-+ return(EC_CPSAR|EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH);
-+
-+ /* Request RX channel teardown through LUT */
-+ while ((RX_LUT_CH_TEARDOWN_REQ_REG(HalDev->dev_base) & 0x80000000) == 0)
-+ {
-+ waitcnt++;
-+ if (waitcnt == WAIT_THRESH)
-+ {
-+ return(EC_CPSAR|EC_FUNC_CHTEARDOWN|EC_VAL_LUT_NOT_READY);
-+ }
-+ }
-+
-+ RX_LUT_CH_TEARDOWN_REQ_REG(HalDev->dev_base) = (Ch & 0xffff);
-+
-+ /* for AAL2, clear channel PDSP RAM here. AAL5 does it when the teardown
-+ has completed (which is asynchronous)*/
-+ if (Ch > 15)
-+ {
-+ /* Get the offset to the AAL2 portion of the block (in words) */
-+ PdspBlockOffset = NUM_PDSP_AAL5_STATE_WORDS + ((Ch-16)*64);
-+ /* Clear PDSP State RAM */
-+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset);
-+ for (i=0; i<NUM_PDSP_AAL2_STATE_WORDS; i++)
-+ *pTmp++ = 0;
-+ }
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+int InitPdsp(CPSAR_DEVICE *HalDev)
-+ {
-+ bit32u NumOfEntries,i,IRamAddress,iTmp;
-+ int *SarPdspFirmware; /* ~GSG 030403 */
-+ int FirmwareSize, rc; /* ~GSG 030403 */
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]InitPdsp(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Get firmware */
-+ rc = HalDev->OsFunc->Control(HalDev->OsDev, "Firmware", "Get", &SarPdspFirmware); /* ~GSG 030403 */
-+ if (rc) /* +GSG 030403 */
-+ return (EC_CPSAR|EC_FUNC_OPEN|EC_VAL_KEY_NOT_FOUND); /* +GSG 030403 */
-+
-+ /* Get firmware size */
-+ rc = HalDev->OsFunc->Control(HalDev->OsDev, "FirmwareSize", "Get", &FirmwareSize); /* ~GSG 030403 */
-+ if (rc) /* +GSG 030403 */
-+ return (EC_CPSAR|EC_FUNC_OPEN|EC_VAL_KEY_NOT_FOUND); /* +GSG 030403 */
-+
-+ IRamAddress = (bit32u) pPDSP_CTRL_REG(HalDev->dev_base);
-+
-+ NumOfEntries = (FirmwareSize)/4; /* ~GSG 030403 */
-+ if (NumOfEntries > IRAM_SIZE)
-+ {
-+ /* Note: On Avalanche, they truncated the PDSP firmware and warned */
-+ /* NumOfEntries = IRAM_SIZE; */
-+ return(EC_CPSAR|EC_FUNC_INIT|EC_VAL_FIRMWARE_TOO_LARGE);
-+ }
-+ for(i=8;i<NumOfEntries;i++)
-+ (*((bit32 *) (IRamAddress+(i*4))))=SarPdspFirmware[i]; /* ~GSG 030403 */
-+
-+ /* Check code */
-+ for(i=8;i<NumOfEntries;i++)
-+ {
-+ iTmp=(*((bit32 *) (IRamAddress+(i*4))));
-+ if (iTmp != SarPdspFirmware[i]) /* ~GSG 030403 */
-+ {
-+ return(EC_CPSAR|EC_FUNC_OPEN|EC_VAL_PDSP_LOAD_FAIL);
-+ }
-+ }
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/*
-+ * This function probes for the instance of the CPHAL module. It will call
-+ * the OS function @c DeviceFindInfo() to get the information required.
-+ *
-+ * @param HalDev CPHAL module instance. (set by xxxInitModule())
-+ *
-+ * @return 0 OK, Otherwise error.
-+ */
-+static int halProbe(CPSAR_DEVICE *HalDev)
-+ {
-+ int Ret;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]halProbe(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(1))
-+ {
-+ dbgPrintf("[os]DeviceFindInfo(Inst:%d, DeviceName:%s, DeviceInfo:%08x)\n",
-+ HalDev->Inst, "sar", (bit32u)&HalDev->DeviceInfo);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Attempt to find the device information */
-+ Ret = HalDev->OsFunc->DeviceFindInfo(HalDev->Inst, "sar", &HalDev->DeviceInfo);
-+ if (Ret)
-+ return(EC_CPSAR|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND);
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+#ifdef __CPHAL_DEBUG
-+static void dbgConfigDump(HAL_DEVICE *HalDev)
-+ {
-+ dbgPrintf(" [cpsar Inst %d] Config Dump:\n", HalDev->Inst);
-+ dbgPrintf(" Base :%08x, offset :%08d\n",
-+ HalDev->dev_base, HalDev->offset);
-+ dbgPrintf(" ResetBit:%08d, ResetBase:%08x\n",
-+ HalDev->ResetBit, HalDev->ResetBase);
-+ dbgPrintf(" UniNni :%08d, debug :%08d\n",
-+ HalDev->ResetBit, HalDev->debug);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+/*
-+ * Sets up HAL default configuration parameter values.
-+ */
-+static void ConfigInit(CPSAR_DEVICE *HalDev)
-+ {
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]ConfigInit(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+ /* configure some defaults with tnetd7300 values */
-+ HalDev->dev_base = 0xa3000000;
-+ HalDev->offset = 0;
-+ HalDev->UniNni = CFG_UNI_NNI;
-+ HalDev->ResetBit = 9;
-+ HalDev->debug = 0;
-+ HalDev->ResetBase = 0xa8611600;
-+ }
-+
-+/*
-+ * Retrieve HAL configuration parameter values.
-+ */
-+static bit32u ConfigGet(HAL_DEVICE *HalDev)
-+ {
-+ bit32u ParmValue, error_code;
-+ char *DeviceInfo = HalDev->DeviceInfo;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]ConfigGet(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* get the configuration parameters common to all modules */
-+ error_code = ConfigGetCommon(HalDev);
-+ if (error_code) return (EC_CPSAR|error_code);
-+
-+ /* get SAR specific configuration parameters */
-+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo,"UniNni",&ParmValue);
-+ if (!error_code) HalDev->UniNni = ParmValue;
-+
-+ return (EC_NO_ERRORS);
-+ }
-+
-+static int halInit(CPSAR_DEVICE *HalDev)
-+ {
-+ bit32u Ret;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]halInit(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(7))
-+ {
-+ dbgPrintf("[cpsar halInit()]InitCount = %d\n", HalDev->InitCount);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Only run the init code for the first calling module per instance */
-+ if (HalDev->InitCount > 1)
-+ {
-+ return (EC_NO_ERRORS);
-+ }
-+
-+ /* Configure HAL defaults */
-+ ConfigInit(HalDev);
-+
-+ /* Retrieve HAL configuration parameters from data store */
-+ Ret = ConfigGet(HalDev);
-+ if (Ret) return (Ret);
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(9))
-+ dbgConfigDump(HalDev);
-+#endif
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+static int halOpen(CPSAR_DEVICE *HalDev)
-+ {
-+ int Ret, Ticks=64;
-+ int i; /*+GSG 030407*/
-+ volatile int *pTmp; /*+GSG 030407*/
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]halOpen(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(7))
-+ {
-+ dbgPrintf("[cpsar halOpen()]OpenCount = %d\n", HalDev->OpenCount);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Only run the open code for the first calling module per instance */
-+ if (HalDev->OpenCount++ > 0)
-+ {
-+ return (EC_NO_ERRORS);
-+ }
-+
-+ /* Take SAR out of reset */
-+ if (((*(volatile bit32u *)(HalDev->ResetBase)) & (1<<HalDev->ResetBit)) != 0)
-+ {
-+ /** @todo Should I somehow call AAL5/AAL2 Close() here? All I've done
-+ here is copy the Close code from each and paste it here. */
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(7))
-+ {
-+ dbgPrintf("[cpsar halOpen()]Module was already out of reset.\n");
-+ dbgPrintf(" Closing module and resetting.\n");
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Disable the Tx CPPI DMA */
-+ TX_CPPI_CTL_REG(HalDev->dev_base) = 0;
-+
-+ /* Disable the Rx CPPI DMA */
-+ RX_CPPI_CTL_REG(HalDev->dev_base) = 0;
-+
-+ /* Disable the PDSP */
-+ PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x00000002;
-+
-+ /* disable interrupt masks */
-+ SAR_TX_MASK_CLR(HalDev->dev_base) = 0xffffffff;
-+ SAR_RX_MASK_CLR(HalDev->dev_base) = 0xffffffff;
-+
-+#ifndef NO_RESET /* GSG+ 030428 */
-+ /* clear reset bit */
-+ (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit); /* ~GSG 030307 */
-+ HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
-+
-+ /* set reset bit */
-+ (*(volatile bit32u *)(HalDev->ResetBase)) |= (1<<HalDev->ResetBit); /* ~GSG 030307 */
-+ HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
-+#endif /* GSG+ 030428 */
-+ }
-+ else
-+ {
-+ (*(volatile bit32u *)(HalDev->ResetBase)) |= (1<<HalDev->ResetBit); /* ~GSG 030307 */
-+ HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
-+ }
-+
-+ /* Configure UNI/NNI */
-+ RX_LUT_GLOBAL_CFG_REG(HalDev->dev_base) |= (HalDev->UniNni & 0x1);
-+
-+ /* Clear entire PDSP state RAM */ /*+GSG 030407*/
-+ pTmp = (pTX_DMA_STATE_WORD_0(HalDev->dev_base)); /*+GSG 030407*/
-+ for (i=0; i<PDSP_STATE_RAM_SIZE; i++) /*+GSG 030407*/
-+ *pTmp++ = 0; /*+GSG 030407*/
-+
-+ /* Configure Oam Mode */ /*+GSG 030407*/
-+ SetOamMode(HalDev); /*+GSG 030407*/
-+
-+ /* Initialize PDSP */
-+ Ret=InitPdsp(HalDev);
-+ if(Ret)
-+ return(Ret);
-+
-+ /* Reset and Enable the PDSP */
-+ PDSP_CTRL_REG(HalDev->dev_base) = 0x00080003;
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+static int halClose(CPSAR_DEVICE *HalDev, int Mode)
-+ {
-+ int Ticks = 64;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]halClose(HalDev:%08x, Mode:%d)\n", (bit32u)HalDev, Mode);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* handle the error case if there is nothing open */
-+ if (HalDev->OpenCount == 0)
-+ {
-+ return(EC_CPSAR|EC_FUNC_CLOSE|EC_VAL_MODULE_ALREADY_CLOSED);
-+ }
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(7))
-+ {
-+ dbgPrintf("[cpsar halClose()]OpenCount = %d\n", HalDev->OpenCount);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Only run the close code for the last calling module per instance */
-+ if (HalDev->OpenCount-- > 1)
-+ {
-+ return (EC_NO_ERRORS);
-+ }
-+
-+ /* Disable the PDSP */
-+ PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x00000002;
-+
-+#ifndef NO_RESET /* GSG +030428 */
-+ /* put device back into reset */
-+ (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit); /* ~GSG 030307 */
-+ HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks);
-+#endif /* GSG +030428 */
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+static int halShutdown(CPSAR_DEVICE *HalDev)
-+ {
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]halShutdown(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* handle the error case */
-+ if (HalDev->InitCount == 0)
-+ {
-+ return(EC_CPSAR|EC_FUNC_CLOSE|EC_VAL_MODULE_ALREADY_SHUTDOWN);
-+ }
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(7))
-+ {
-+ dbgPrintf("[cpsar halShutdown()]InitCount = %d\n", HalDev->InitCount);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ /* Only run the shutdown code for the last calling module per instance */
-+ if (HalDev->InitCount-- > 1)
-+ {
-+ return (EC_NO_ERRORS);
-+ }
-+
-+ /* free the SAR functions */
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(6))
-+ {
-+ dbgPrintf(" [cpsar halShutdown()]: Free CPSAR function pointers\n");
-+ osfuncSioFlush();
-+ }
-+ if (DBG(1)||DBG(3))
-+ {
-+ dbgPrintf("[os]Free(MemPtr:%08x)\n", (bit32u)HalDev->HalFuncPtr);
-+ osfuncSioFlush();
-+ }
-+#endif
-+ /* free the HalFunc */
-+ HalDev->OsFunc->Free(HalDev->HalFuncPtr);
-+
-+ /* we have a static global, so I should clear it's value as well */
-+ CpsarDev[HalDev->Inst] = 0;
-+
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(6))
-+ {
-+ dbgPrintf(" [cpsar halShutdown()]Free HalDev\n");
-+ osfuncSioFlush();
-+ }
-+ if (DBG(1)||DBG(3))
-+ {
-+ dbgPrintf("[os]Free(MemPtr:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+ /* free the CPSAR device */
-+ HalDev->OsFunc->Free(HalDev);
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+static int halTick(CPSAR_DEVICE *HalDev)
-+ {
-+#ifdef __CPHAL_DEBUG
-+ if (DBG(0))
-+ {
-+ dbgPrintf("[cpsar]halTick(HalDev:%08x)\n", (bit32u)HalDev);
-+ osfuncSioFlush();
-+ }
-+#endif
-+
-+ return(EC_NO_ERRORS);
-+ }
-+
-+/*
-+ * The CPSAR version of InitModule() should be passed the OS_FUNCTIONS pointer,
-+ * and will return the HalDev pointer.
-+ *
-+ * @param HalDev Pointer to CPSAR module information. This will
-+ * be used by the OS when communicating to this module via
-+ * CPSAR.
-+ * @param OsDev Pointer to OS device information. This will be saved by
-+ * the CPSAR and returned to the OS when required.
-+ * @param HalFunc HAL_FUNCTIONS pointer.
-+ * @param Size Pointer to the size of the HAL_FUNCTIONS structure. (If
-+ * HalFunc is 0, the value will be set by CPSAR, otherwise
-+ * ignored)
-+ * @param Inst The instance number of the module to initialize. (start at
-+ * 0).
-+ *
-+ * @return 0 OK, Nonzero - error.
-+ */
-+/*
-+int cpsarInitModule(CPSAR_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ CPSAR_FUNCTIONS *HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int *Size,
-+ int Inst)
-+*/
-+int cpsarInitModule(CPSAR_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ CPSAR_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst)
-+ {
-+ CPSAR_DEVICE *HalPtr;
-+ CPSAR_FUNCTIONS *HalFuncPtr;
-+
-+ /*
-+ if ( HalFunc == 0 )
-+ {
-+ *Size = sizeof(CPSAR_FUNCTIONS);
-+ return(EC_NO_ERRORS);
-+ }
-+ */
-+
-+ if (CpsarDev[Inst] != 0)
-+ {
-+ /* this SAR module has been connected to before, so do not
-+ allocate another CPSAR_DEVICE */
-+ HalPtr = CpsarDev[Inst];
-+
-+ /* increase count of attached modules */
-+ HalPtr->InitCount++;
-+ }
-+ else
-+ {
-+ /* allocate the CPSAR_DEVICE structure */
-+ HalPtr = (CPSAR_DEVICE *) OsFunc->MallocDev(sizeof(CPSAR_DEVICE));
-+ if(!HalPtr)
-+ return(EC_CPSAR|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED);
-+
-+ HalFuncPtr = (CPSAR_FUNCTIONS *) OsFunc->Malloc(sizeof(CPSAR_FUNCTIONS));
-+ if (!HalFuncPtr)
-+ return (EC_CPSAR|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED);
-+
-+ /* Initialize the size of hal functions */
-+ *HalFuncSize = sizeof (CPSAR_FUNCTIONS);
-+
-+ /* ensure the device structure is cleared */
-+ OsFunc->Memset(HalPtr, 0, sizeof(CPSAR_DEVICE));
-+
-+ /* clear the function pointers */
-+ OsFunc->Memset(HalFuncPtr, 0, sizeof(CPSAR_FUNCTIONS));
-+
-+ /* Supply pointers for the CPSAR API functions */
-+ HalFuncPtr->ChannelSetup = halChannelSetup;
-+ HalFuncPtr->ChannelTeardown = halChannelTeardown;
-+ HalFuncPtr->Close = halClose;
-+ HalFuncPtr->Control = halControl;
-+ HalFuncPtr->Init = halInit;
-+ HalFuncPtr->Open = halOpen;
-+ HalFuncPtr->Probe = halProbe;
-+ HalFuncPtr->Shutdown = halShutdown;
-+ HalFuncPtr->Tick = halTick;
-+
-+ /* keep a reference to HalFuncPtr so I can free it later */
-+ HalPtr->HalFuncPtr = HalFuncPtr;
-+
-+ /* store the CPSAR_DEVICE, so the CPSAR module will know whether
-+ it is in use for the given instance */
-+ CpsarDev[Inst] = HalPtr;
-+
-+ /* increase count of attached modules */
-+ HalPtr->InitCount++;
-+ }
-+
-+ /* @todo Does this need modification to deal with multiple callers/
-+ drivers? If different callers will use different OsDev/OsFunc,
-+ then the current code will not work.
-+ */
-+
-+ /* initialize the CPSAR_DEVICE structure */
-+ HalPtr->OsDev = OsDev;
-+ /*HalPtr->OsOpen = OsDev;*/
-+ HalPtr->Inst = Inst;
-+ HalPtr->OsFunc = OsFunc;
-+
-+ /* pass the HalPtr back to the caller */
-+ *HalDev = HalPtr;
-+ *HalFunc = HalPtr->HalFuncPtr;
-+
-+ return (EC_NO_ERRORS);
-+ }
-diff -urN linux.old/drivers/atm/sangam_atm/cpsar_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpsar_cpaal5.h
---- linux.old/drivers/atm/sangam_atm/cpsar_cpaal5.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpsar_cpaal5.h 2005-08-23 04:46:50.087845216 +0200
-@@ -0,0 +1,103 @@
-+/*******************************************************************************
-+ * TNETDxxxx Software Support
-+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ * FILE: cpsar.h
-+ *
-+ * DESCRIPTION:
-+ * This file contains data structure definitions for the CPSAR HAL.
-+ *
-+ * HISTORY:
-+ * 6Sep02 Greg 1.00 Original Version created.
-+ *
-+ *****************************************************************************/
-+#ifndef _INC_CPSAR
-+#define _INC_CPSAR
-+
-+#define NUM_RX_STATE_WORDS 7
-+#define NUM_TX_STATE_WORDS 9
-+#define MAX_CHAN 19
-+
-+
-+#ifndef _CPHAL_CPSAR
-+typedef void CPSAR_DEVICE;
-+#endif
-+
-+/*
-+ * HAL Default Parameter Values
-+ */
-+#define CFG_UNI_NNI 0
-+
-+/**
-+ * @ingroup shared_data
-+ *
-+ * List of defined keys for use with Control().
-+ */
-+typedef enum
-+ {
-+ /* SAR */
-+ enGET_FIRMWARE, /**< Used by the SAR to request a pointer to firmware */
-+ enGET_FIRMWARE_SIZE, /**< Used by the SAR to request the size of the firmware */
-+ enEND=9999 /* Last entry */
-+ }INFO_KEY;
-+
-+/*
-+ * The CPHAL_FUNCTIONS struct defines the CPHAL function pointers used by upper layer
-+ * software. The upper layer software receives these pointers through the
-+ * call to cphalInitModule().
-+ */
-+typedef struct
-+ {
-+ int (*ChannelSetup)(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh);
-+ int (*ChannelTeardown)(CPSAR_DEVICE *HalDev, int Ch, int Mode);
-+ int (*Close)(CPSAR_DEVICE *HalDev, int Mode);
-+ int (*Control)(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+ int (*Init)(CPSAR_DEVICE *HalDev);
-+ int (*ModeChange)(CPSAR_DEVICE *HalDev, char *DeviceParms);
-+ int (*Open)(CPSAR_DEVICE *HalDev);
-+ int (*Probe)(CPSAR_DEVICE *HalDev);
-+ int (*Shutdown)(CPSAR_DEVICE *HalDev);
-+ int (*Tick)(CPSAR_DEVICE *HalDev);
-+ } CPSAR_FUNCTIONS;
-+
-+/*
-+ * This is the data structure for a generic HAL device. It contains all device
-+ * specific data for a single instance of that device. This includes Rx/Tx
-+ * buffer queues, device base address, reset bit, and other information.
-+ */
-+typedef struct cpsar_device
-+ {
-+ bit32 dev_base;
-+ bit32 offset;
-+ bit32 TxTeardownPending[MAX_CHAN];
-+ bit32 RxTeardownPending[MAX_CHAN];
-+ bit32 ChIsOpen[MAX_CHAN];
-+ bit32 ResetBit;
-+ bit32 debug;
-+ OS_DEVICE *OsDev;
-+ OS_FUNCTIONS *OsFunc;
-+ /*void *OsOpen;*/
-+ bit32 UniNni;
-+ bit32 Inst;
-+ bit32u DeviceCPID[4];
-+ bit32u LBSourceLLID[4];
-+ bit32u OamRate[11];
-+ CHANNEL_INFO ChData[MAX_CHAN];
-+ int InitCount;
-+ int OpenCount;
-+ char *DeviceInfo;
-+ bit32u ResetBase;
-+ DEVICE_STATE State;
-+ CPSAR_FUNCTIONS *HalFuncPtr;
-+ int OamMode; /* +GSG 030407 */
-+ }CPSARDEVICE;
-+
-+extern int cpsarInitModule(CPSAR_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ CPSAR_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/cpsar.h linux.dev/drivers/atm/sangam_atm/cpsar.h
---- linux.old/drivers/atm/sangam_atm/cpsar.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpsar.h 2005-08-23 04:46:50.087845216 +0200
-@@ -0,0 +1,103 @@
-+/*******************************************************************************
-+ * TNETDxxxx Software Support
-+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ * FILE: cpsar.h
-+ *
-+ * DESCRIPTION:
-+ * This file contains data structure definitions for the CPSAR HAL.
-+ *
-+ * HISTORY:
-+ * 6Sep02 Greg 1.00 Original Version created.
-+ *
-+ *****************************************************************************/
-+#ifndef _INC_CPSAR
-+#define _INC_CPSAR
-+
-+#define NUM_RX_STATE_WORDS 7
-+#define NUM_TX_STATE_WORDS 9
-+#define MAX_CHAN 19
-+
-+
-+#ifndef _CPHAL_CPSAR
-+typedef void CPSAR_DEVICE;
-+#endif
-+
-+/*
-+ * HAL Default Parameter Values
-+ */
-+#define CFG_UNI_NNI 0
-+
-+/**
-+ * @ingroup shared_data
-+ *
-+ * List of defined keys for use with Control().
-+ */
-+typedef enum
-+ {
-+ /* SAR */
-+ enGET_FIRMWARE, /**< Used by the SAR to request a pointer to firmware */
-+ enGET_FIRMWARE_SIZE, /**< Used by the SAR to request the size of the firmware */
-+ enEND=9999 /* Last entry */
-+ }INFO_KEY;
-+
-+/*
-+ * The CPHAL_FUNCTIONS struct defines the CPHAL function pointers used by upper layer
-+ * software. The upper layer software receives these pointers through the
-+ * call to cphalInitModule().
-+ */
-+typedef struct
-+ {
-+ int (*ChannelSetup)(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh);
-+ int (*ChannelTeardown)(CPSAR_DEVICE *HalDev, int Ch, int Mode);
-+ int (*Close)(CPSAR_DEVICE *HalDev, int Mode);
-+ int (*Control)(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+ int (*Init)(CPSAR_DEVICE *HalDev);
-+ int (*ModeChange)(CPSAR_DEVICE *HalDev, char *DeviceParms);
-+ int (*Open)(CPSAR_DEVICE *HalDev);
-+ int (*Probe)(CPSAR_DEVICE *HalDev);
-+ int (*Shutdown)(CPSAR_DEVICE *HalDev);
-+ int (*Tick)(CPSAR_DEVICE *HalDev);
-+ } CPSAR_FUNCTIONS;
-+
-+/*
-+ * This is the data structure for a generic HAL device. It contains all device
-+ * specific data for a single instance of that device. This includes Rx/Tx
-+ * buffer queues, device base address, reset bit, and other information.
-+ */
-+typedef struct cpsar_device
-+ {
-+ bit32 dev_base;
-+ bit32 offset;
-+ bit32 TxTeardownPending[MAX_CHAN];
-+ bit32 RxTeardownPending[MAX_CHAN];
-+ bit32 ChIsOpen[MAX_CHAN];
-+ bit32 ResetBit;
-+ bit32 debug;
-+ OS_DEVICE *OsDev;
-+ OS_FUNCTIONS *OsFunc;
-+ /*void *OsOpen;*/
-+ bit32 UniNni;
-+ bit32 Inst;
-+ bit32u DeviceCPID[4];
-+ bit32u LBSourceLLID[4];
-+ bit32u OamRate[11];
-+ CHANNEL_INFO ChData[MAX_CHAN];
-+ int InitCount;
-+ int OpenCount;
-+ char *DeviceInfo;
-+ bit32u ResetBase;
-+ DEVICE_STATE State;
-+ CPSAR_FUNCTIONS *HalFuncPtr;
-+ int OamMode; /* +GSG 030407 */
-+ }CPSARDEVICE;
-+
-+extern int cpsarInitModule(CPSAR_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ CPSAR_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/cp_sar_reg.h linux.dev/drivers/atm/sangam_atm/cp_sar_reg.h
---- linux.old/drivers/atm/sangam_atm/cp_sar_reg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cp_sar_reg.h 2005-08-23 04:46:50.087845216 +0200
-@@ -0,0 +1,217 @@
-+/***************************************************************************
-+ TNETD73xx Software Support
-+ Copyright(c) 2000, Texas Instruments Incorporated. All Rights Reserved.
-+
-+ FILE: cp_sar_reg.h Register definitions for the SAR module
-+
-+ DESCRIPTION:
-+ This include file contains register definitions for the
-+ SAR module.
-+
-+ HISTORY:
-+ 15 Jan 02 G. Guyotte Original version written
-+ 03 Oct 02 G. Guyotte C++ style comments removed
-+****************************************************************************/
-+#ifndef _INC_SAR_REG
-+#define _INC_SAR_REG
-+
-+/* Global Registers */
-+#define pSAR_ID_REG(base) ((volatile bit32u *)(base+0x0000))
-+#define SAR_ID_REG(base) (*pSAR_ID_REG(base))
-+#define pSAR_STATUS_SET_REG(base) ((volatile bit32u *)(base+0x0008))
-+#define SAR_STATUS_SET_REG(base) (*pSAR_STATUS_SET_REG(base))
-+#define pSAR_STATUS_CLR_REG(base) ((volatile bit32u *)(base+0x000C))
-+#define SAR_STATUS_CLR_REG(base) (*pSAR_STATUS_CLR_REG(base))
-+#define pSAR_HOST_INT_EN_SET_REG(base) ((volatile bit32u *)(base+0x0010))
-+#define SAR_HOST_INT_EN_SET_REG(base) (*pSAR_HOST_INT_EN_SET_REG(base))
-+#define pSAR_HOST_INT_EN_CLR_REG(base) ((volatile bit32u *)(base+0x0014))
-+#define SAR_HOST_INT_EN_CLR_REG(base) (*pSAR_HOST_INT_EN_CLR_REG(base))
-+#define pSAR_PDSP_INT_EN_SET_REG(base) ((volatile bit32u *)(base+0x0018))
-+#define SAR_PDSP_INT_EN_SET_REG(base) (*pSAR_PDSP_INT_EN_SET_REG(base))
-+#define pSAR_PDSP_INT_EN_CLR_REG(base) ((volatile bit32u *)(base+0x001C))
-+#define SAR_PDSP_INT_EN_CLR_REG(base) (*pSAR_PDSP_INT_EN_CLR_REG(base))
-+
-+/* PDSP OAM General Purpose Registers */
-+#define pSAR_PDSP_HOST_OAM_CONFIG_REG(base) ((volatile bit32u *)(base+0x0020))
-+#define SAR_PDSP_HOST_OAM_CONFIG_REG(base) (*pSAR_PDSP_HOST_OAM_CONFIG_REG(base))
-+#define pSAR_PDSP_OAM_CORR_REG(base) ((volatile bit32u *)(base+0x0024))
-+#define SAR_PDSP_OAM_CORR_REG(base) (*pSAR_PDSP_OAM_CORR_REG(base))
-+#define pSAR_PDSP_OAM_LB_RESULT_REG(base) ((volatile bit32u *)(base+0x0028))
-+#define SAR_PDSP_OAM_LB_RESULT_REG(base) (*pSAR_PDSP_OAM_LB_RESULT_REG(base))
-+#define pSAR_PDSP_OAM_F5_LB_COUNT_REG(base) ((volatile bit32u *)(base+0x002c)) /* +GSG 030416 */
-+#define SAR_PDSP_OAM_F5_LB_COUNT_REG(base) (*pSAR_PDSP_OAM_F5_LB_COUNT_REG(base)) /* +GSG 030416 */
-+#define pSAR_PDSP_OAM_F4_LB_COUNT_REG(base) ((volatile bit32u *)(base+0x0030)) /* +GSG 030416 */
-+#define SAR_PDSP_OAM_F4_LB_COUNT_REG(base) (*pSAR_PDSP_OAM_F4_LB_COUNT_REG(base)) /* +GSG 030416 */
-+#define pSAR_PDSP_FWD_UNK_VC_REG(base) ((volatile bit32u *)(base+0x0034)) /* +GSG 030701 */
-+#define SAR_PDSP_FWD_UNK_VC_REG(base) (*pSAR_PDSP_FWD_UNK_VC_REG(base)) /* +GSG 030701 */
-+
-+
-+/* Rx Lookup Table Registers */
-+#define pRX_LUT_GLOBAL_CFG_REG(base) ((volatile bit32u *)(base+0x0080))
-+#define RX_LUT_GLOBAL_CFG_REG(base) (*pRX_LUT_GLOBAL_CFG_REG(base))
-+#define pRX_LUT_CH_SETUP_REQ_REG(base) ((volatile bit32u *)(base+0x0090))
-+#define RX_LUT_CH_SETUP_REQ_REG(base) (*pRX_LUT_CH_SETUP_REQ_REG(base))
-+#define pRX_LUT_CH_SETUP_REQ_VC_REG(base) ((volatile bit32u *)(base+0x0094))
-+#define RX_LUT_CH_SETUP_REQ_VC_REG(base) (*pRX_LUT_CH_SETUP_REQ_VC_REG(base))
-+#define pRX_LUT_CH_TEARDOWN_REQ_REG(base) ((volatile bit32u *)(base+0x009C))
-+#define RX_LUT_CH_TEARDOWN_REQ_REG(base) (*pRX_LUT_CH_TEARDOWN_REQ_REG(base))
-+
-+/* Tx Scheduler Registers */
-+#define pTX_CH_MAPPING_REG(base) ((volatile bit32u *)(base+0x0170))
-+#define TX_CH_MAPPING_REG(base) (*pTX_CH_MAPPING_REG(base))
-+
-+/* Tx CPPI DMA Controller Registers */
-+#define pTX_CPPI_CTL_REG(base) ((volatile bit32u *)(base+0x0700))
-+#define TX_CPPI_CTL_REG(base) (*pTX_CPPI_CTL_REG(base))
-+#define pTX_CPPI_TEARDOWN_REG(base) ((volatile bit32u *)(base+0x0704))
-+#define TX_CPPI_TEARDOWN_REG(base) (*pTX_CPPI_TEARDOWN_REG(base))
-+
-+/* EOI Interrupt Additions */
-+#define pSAR_EOI(base) ((volatile bit32u *)(base+0x0708))
-+#define SAR_EOI(base) (*pSAR_EOI(base))
-+#define pSAR_INTR_VECTOR(base) ((volatile bit32u *)(base+0x070c))
-+#define SAR_INTR_VECTOR(base) (*pSAR_INTR_VECTOR(base))
-+#define pSAR_TX_MASKED_STATUS(base) ((volatile bit32u *)(base+0x0710))
-+#define SAR_TX_MASKED_STATUS(base) (*pSAR_TX_MASKED_STATUS(base))
-+#define pSAR_TX_RAW_STATUS(base) ((volatile bit32u *)(base+0x0714))
-+#define SAR_TX_RAW_STATUS(base) (*pSAR_TX_RAW_STATUS(base))
-+#define pSAR_TX_MASK_SET(base) ((volatile bit32u *)(base+0x0718))
-+#define SAR_TX_MASK_SET(base) (*pSAR_TX_MASK_SET(base))
-+#define pSAR_TX_MASK_CLR(base) ((volatile bit32u *)(base+0x071c))
-+#define SAR_TX_MASK_CLR(base) (*pSAR_TX_MASK_CLR(base))
-+
-+/* Rx CPPI DMA Controller Registers */
-+#define pRX_CPPI_CTL_REG(base) ((volatile bit32u *)(base+0x0780))
-+#define RX_CPPI_CTL_REG(base) (*pRX_CPPI_CTL_REG(base))
-+#define pSAR_RX_MASKED_STATUS(base) ((volatile bit32u *)(base+0x0790))
-+#define SAR_RX_MASKED_STATUS(base) (*pSAR_RX_MASKED_STATUS(base))
-+#define pSAR_RX_RAW_STATUS(base) ((volatile bit32u *)(base+0x0794))
-+#define SAR_RX_RAW_STATUS(base) (*pSAR_RX_RAW_STATUS(base))
-+#define pSAR_RX_MASK_SET(base) ((volatile bit32u *)(base+0x0798))
-+#define SAR_RX_MASK_SET(base) (*pSAR_RX_MASK_SET(base))
-+#define pSAR_RX_MASK_CLR(base) ((volatile bit32u *)(base+0x079c))
-+#define SAR_RX_MASK_CLR(base) (*pSAR_RX_MASK_CLR(base))
-+
-+/* PDSP Control/Status Registers */
-+#define pPDSP_CTRL_REG(base) ((volatile bit32u *)(base+0x4000))
-+#define PDSP_CTRL_REG(base) (*pPDSP_CTRL_REG(base))
-+
-+/* PDSP Instruction RAM */
-+#define pPDSP_IRAM(base) ((volatile bit32u *)(base+0x4020))
-+#define PDSP_IRAM(base) (*pPDSP_IRAM(base))
-+
-+/*
-+ * Channel 0 State/Scratchpad RAM Block
-+ *
-+ * The following registers (Tx DMA State, Rx DMA State, CPPI Completion PTR,
-+ * and PDSP Data) have been given the correct address for channel 0. To
-+ * reach the registers for channel X, add (X * 0x100) to the pointer address.
-+ *
-+ */
-+
-+#define PDSP_STATE_RAM_SIZE 1024
-+
-+/* Tx DMA State RAM */
-+#define pTX_DMA_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8000))
-+#define TX_DMA_STATE_WORD_0(base) (*pTX_DMA_STATE_WORD_0(base))
-+#define pTX_DMA_STATE_WORD_1(base) ((volatile bit32u *)(base+0x8004))
-+#define TX_DMA_STATE_WORD_1(base) (*pTX_DMA_STATE_WORD_1(base))
-+#define pTX_DMA_STATE_WORD_2(base) ((volatile bit32u *)(base+0x8008))
-+#define TX_DMA_STATE_WORD_2(base) (*pTX_DMA_STATE_WORD_2(base))
-+#define pTX_DMA_STATE_WORD_3(base) ((volatile bit32u *)(base+0x800C))
-+#define TX_DMA_STATE_WORD_3(base) (*pTX_DMA_STATE_WORD_3(base))
-+#define pTX_DMA_STATE_WORD_4(base) ((volatile bit32u *)(base+0x8010))
-+#define TX_DMA_STATE_WORD_4(base) (*pTX_DMA_STATE_WORD_4(base))
-+#define pTX_DMA_STATE_WORD_5(base) ((volatile bit32u *)(base+0x8014))
-+#define TX_DMA_STATE_WORD_5(base) (*pTX_DMA_STATE_WORD_5(base))
-+#define pTX_DMA_STATE_WORD_6(base) ((volatile bit32u *)(base+0x8018))
-+#define TX_DMA_STATE_WORD_6(base) (*pTX_DMA_STATE_WORD_6(base))
-+#define pTX_DMA_STATE_WORD_7(base) ((volatile bit32u *)(base+0x801C))
-+#define TX_DMA_STATE_WORD_7(base) (*pTX_DMA_STATE_WORD_7(base))
-+#define pTX_DMA_STATE_WORD_8(base) ((volatile bit32u *)(base+0x8020))
-+#define TX_DMA_STATE_WORD_8(base) (*pTX_DMA_STATE_WORD_8(base))
-+
-+/* Rx DMA State RAM */
-+#define pRX_DMA_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8024))
-+#define RX_DMA_STATE_WORD_0(base) (*pRX_DMA_STATE_WORD_0(base))
-+#define pRX_DMA_STATE_WORD_1(base) ((volatile bit32u *)(base+0x8028))
-+#define RX_DMA_STATE_WORD_1(base) (*pRX_DMA_STATE_WORD_1(base))
-+#define pRX_DMA_STATE_WORD_2(base) ((volatile bit32u *)(base+0x802C))
-+#define RX_DMA_STATE_WORD_2(base) (*pRX_DMA_STATE_WORD_2(base))
-+#define pRX_DMA_STATE_WORD_3(base) ((volatile bit32u *)(base+0x8030))
-+#define RX_DMA_STATE_WORD_3(base) (*pRX_DMA_STATE_WORD_3(base))
-+#define pRX_DMA_STATE_WORD_4(base) ((volatile bit32u *)(base+0x8034))
-+#define RX_DMA_STATE_WORD_4(base) (*pRX_DMA_STATE_WORD_4(base))
-+#define pRX_DMA_STATE_WORD_5(base) ((volatile bit32u *)(base+0x8038))
-+#define RX_DMA_STATE_WORD_5(base) (*pRX_DMA_STATE_WORD_5(base))
-+#define pRX_DMA_STATE_WORD_6(base) ((volatile bit32u *)(base+0x803C))
-+#define RX_DMA_STATE_WORD_6(base) (*pRX_DMA_STATE_WORD_6(base))
-+
-+/* Tx CPPI Completion Pointers */
-+#define pTXH_CPPI_COMP_PTR(base) ((volatile bit32u *)(base+0x8040))
-+#define TXH_CPPI_COMP_PTR(base) (*pTXH_CPPI_COMP_PTR(base))
-+#define pTXL_CPPI_COMP_PTR(base) ((volatile bit32u *)(base+0x8044))
-+#define TXL_CPPI_COMP_PTR(base) (*pTXL_CPPI_COMP_PTR(base))
-+
-+/* Rx CPPI Completion Pointer */
-+#define pRX_CPPI_COMP_PTR(base) ((volatile bit32u *)(base+0x8048))
-+#define RX_CPPI_COMP_PTR(base) (*pRX_CPPI_COMP_PTR(base))
-+
-+/* Tx PDSP Defines */
-+#define NUM_PDSP_AAL5_STATE_WORDS 24
-+#define NUM_PDSP_AAL2_STATE_WORDS 20
-+
-+/* PDSP State RAM Block 0 */
-+#define pPDSP_BLOCK_0(base) ((volatile bit32u *)(base+0x8050))
-+#define PDSP_BLOCK_0(base) (*pPDSP_BLOCK_0(base))
-+
-+/* AAL5 Tx PDSP State RAM */
-+#define pPDSP_AAL5_TX_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8050))
-+#define PDSP_AAL5_TX_STATE_WORD_0(base) (*pPDSP_AAL5_TX_STATE_WORD_0(base))
-+
-+/* AAL5 Rx PDSP State RAM */
-+#define pPDSP_AAL5_RX_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8070))
-+#define PDSP_AAL5_RX_STATE_WORD_0(base) (*pPDSP_AAL5_RX_STATE_WORD_0(base))
-+
-+/* AAL5 Tx VP PDSP State RAM */
-+#define pPDSP_AAL5_TX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8090))
-+#define PDSP_AAL5_TX_VP_STATE_WORD_0(base) (*pPDSP_AAL5_TX_VP_STATE_WORD_0(base))
-+
-+/* AAL5 Rx VP PDSP State RAM */
-+#define pPDSP_AAL5_RX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80A0))
-+#define PDSP_AAL5_RX_VP_STATE_WORD_0(base) (*pPDSP_AAL5_RX_VP_STATE_WORD_0(base))
-+
-+/* AAL2 Tx PDSP State RAM */
-+#define pPDSP_AAL2_TX_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80B0))
-+#define PDSP_AAL2_TX_STATE_WORD_0(base) (*pPDSP_AAL2_TX_STATE_WORD_0(base))
-+
-+/* AAL2 Rx PDSP State RAM */
-+#define pPDSP_AAL2_RX_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80D0))
-+#define PDSP_AAL2_RX_STATE_WORD_0(base) (*pPDSP_AAL2_RX_STATE_WORD_0(base))
-+
-+/* AAL2 Tx VP PDSP State RAM */
-+#define pPDSP_AAL2_TX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80E0))
-+#define PDSP_AAL2_TX_VP_STATE_WORD_0(base) (*pPDSP_AAL2_TX_VP_STATE_WORD_0(base))
-+
-+/* AAL2 Rx VP PDSP State RAM */
-+#define pPDSP_AAL2_RX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80F0))
-+#define PDSP_AAL2_RX_VP_STATE_WORD_0(base) (*pPDSP_AAL2_RX_VP_STATE_WORD_0(base))
-+
-+/* PDSP OAM Configuration Block */
-+#define pOAM_CONFIG_BLOCK_WORD_0(base) ((volatile bit32u *)(base+0x83C0))
-+#define OAM_CONFIG_BLOCK_WORD_0(base) (*pOAM_CONFIG_BLOCK_WORD_0(base))
-+
-+/* PDSP OAM Padding Block */
-+#define pOAM_PADDING_BLOCK_WORD_0(base) ((volatile bit32u *)(base+0x84C0))
-+#define OAM_PADDING_BLOCK_WORD_0(base) (*pOAM_PADDING_BLOCK_WORD_0(base))
-+
-+#define NUM_OAM_RATES 11
-+
-+/* PDSP OAM Timer State RAM */
-+#define pOAM_TIMER_STATE_WORD_0(base) ((volatile bit32u *)(base+0x85B0))
-+#define OAM_TIMER_STATE_WORD_0(base) (*pOAM_TIMER_STATE_WORD_0(base))
-+
-+
-+/* END OF FILE */
-+
-+#endif _INC_SAR_REG
-diff -urN linux.old/drivers/atm/sangam_atm/cpswhal_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpswhal_cpaal5.h
---- linux.old/drivers/atm/sangam_atm/cpswhal_cpaal5.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpswhal_cpaal5.h 2005-08-23 04:46:50.088845064 +0200
-@@ -0,0 +1,629 @@
-+/************************************************************************
-+ * TNETDxxxx Software Support
-+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ * FILE: cphal.h
-+ *
-+ * DESCRIPTION:
-+ * User include file, contains data definitions shared between the CPHAL
-+ * and the upper-layer software.
-+ *
-+ * HISTORY:
-+ * Date Modifier Ver Notes
-+ * 28Feb02 Greg 1.00 Original
-+ * 06Mar02 Greg 1.01 Documentation enhanced
-+ * 18Jul02 Greg 1.02 Many updates (OAM additions, general reorg)
-+ * 22Nov02 Mick RC2 Additions from Denis' input on Control
-+ *
-+ * author Greg Guyotte
-+ * version 1.02
-+ * date 18-Jul-2002
-+ *****************************************************************************/
-+#ifndef _INC_CPHAL_H
-+#define _INC_CPHAL_H
-+
-+#ifdef _CPHAL_CPMAC
-+#include "ec_errors_cpmac.h"
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+#include "ec_errors_cpaal5.h"
-+#endif
-+
-+#ifdef _CPHAL_CPSAR
-+#include "ec_errors_cpsar.h"
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+#include "ec_errors_cpaal2.h"
-+#endif
-+
-+#ifndef __ADAM2
-+typedef char bit8;
-+typedef short bit16;
-+typedef int bit32;
-+
-+typedef unsigned char bit8u;
-+typedef unsigned short bit16u;
-+typedef unsigned int bit32u;
-+
-+/*
-+typedef char INT8;
-+typedef short INT16;
-+typedef int INT32;
-+typedef unsigned char UINT8;
-+typedef unsigned short UINT16;
-+typedef unsigned int UINT32;
-+*/
-+/*typedef unsigned int size_t;*/
-+#endif
-+
-+#ifdef _CPHAL
-+
-+#ifndef TRUE
-+#define TRUE (1==1)
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE (1==2)
-+#endif
-+
-+#ifndef NULL
-+#define NULL 0
-+#endif
-+
-+#endif
-+
-+#define VirtToPhys(a) (((int)a)&~0xe0000000)
-+#define VirtToVirtNoCache(a) ((void*)((VirtToPhys(a))|0xa0000000))
-+#define VirtToVirtCache(a) ((void*)((VirtToPhys(a))|0x80000000))
-+#define PhysToVirtNoCache(a) ((void*)(((int)a)|0xa0000000))
-+#define PhysToVirtCache(a) ((void*)(((int)a)|0x80000000))
-+/*
-+#define DataCacheHitInvalidate(a) {__asm__(" cache 17, (%0)" : : "r" (a));}
-+#define DataCacheHitWriteback(a) {__asm__(" cache 25, (%0)" : : "r" (a));}
-+*/
-+
-+#define PARTIAL 1 /**< Used in @c Close() and @c ChannelTeardown() */
-+#define FULL 2 /**< Used in @c Close() and @c ChannelTeardown() */
-+
-+/* Channel Teardown Defines */
-+#define RX_TEARDOWN 2
-+#define TX_TEARDOWN 1
-+#define BLOCKING_TEARDOWN 8
-+#define FULL_TEARDOWN 4
-+#define PARTIAL_TEARDOWN 0
-+
-+#define MAX_DIR 2
-+#define DIRECTION_TX 0
-+#define DIRECTION_RX 1
-+#define TX_CH 0
-+#define RX_CH 1
-+#define HAL_ERROR_DEVICE_NOT_FOUND 1
-+#define HAL_ERROR_FAILED_MALLOC 2
-+#define HAL_ERROR_OSFUNC_SIZE 3
-+#define HAL_DEFAULT 0xFFFFFFFF
-+#define VALID(val) (val!=HAL_DEFAULT)
-+
-+/*
-+ERROR REPORTING
-+
-+HAL Module Codes. Each HAL module reporting an error code
-+should OR the error code with the respective Module error code
-+from the list below.
-+*/
-+#define EC_AAL5 EC_HAL|EC_DEV_AAL5
-+#define EC_AAL2 EC_HAL|EC_DEV_AAL2
-+#define EC_CPSAR EC_HAL|EC_DEV_CPSAR
-+#define EC_CPMAC EC_HAL|EC_DEV_CPMAC
-+#define EC_VDMA EC_HAL|EC_DEV_VDMA
-+#define EC_VLYNQ EC_HAL|EC_DEV_VLYNQ
-+#define EC_CPPI EC_HAL|EC_DEV_CPPI
-+
-+/*
-+HAL Function Codes. Each HAL module reporting an error code
-+should OR the error code with one of the function codes from
-+the list below.
-+*/
-+#define EC_FUNC_HAL_INIT EC_FUNC(1)
-+#define EC_FUNC_CHSETUP EC_FUNC(2)
-+#define EC_FUNC_CHTEARDOWN EC_FUNC(3)
-+#define EC_FUNC_RXRETURN EC_FUNC(4)
-+#define EC_FUNC_SEND EC_FUNC(5)
-+#define EC_FUNC_RXINT EC_FUNC(6)
-+#define EC_FUNC_TXINT EC_FUNC(7)
-+#define EC_FUNC_AAL2_VDMA EC_FUNC(8)
-+#define EC_FUNC_OPTIONS EC_FUNC(9)
-+#define EC_FUNC_PROBE EC_FUNC(10)
-+#define EC_FUNC_OPEN EC_FUNC(11)
-+#define EC_FUNC_CONTROL EC_FUNC(12)
-+#define EC_FUNC_DEVICE_INT EC_FUNC(13)
-+#define EC_FUNC_STATUS EC_FUNC(14)
-+#define EC_FUNC_TICK EC_FUNC(15)
-+#define EC_FUNC_CLOSE EC_FUNC(16)
-+#define EC_FUNC_SHUTDOWN EC_FUNC(17)
-+#define EC_FUNC_DEVICE_INT_ALT EC_FUNC(18) /* +GSG 030306 */
-+
-+/*
-+HAL Error Codes. The list below defines every type of error
-+used in all HAL modules. DO NOT CHANGE THESE VALUES! Add new
-+values in integer order to the bottom of the list.
-+*/
-+#define EC_VAL_PDSP_LOAD_FAIL EC_ERR(0x01)|EC_CRITICAL
-+#define EC_VAL_FIRMWARE_TOO_LARGE EC_ERR(0x02)|EC_CRITICAL
-+#define EC_VAL_DEVICE_NOT_FOUND EC_ERR(0x03)|EC_CRITICAL
-+#define EC_VAL_BASE_ADDR_NOT_FOUND EC_ERR(0x04)|EC_CRITICAL
-+#define EC_VAL_RESET_BIT_NOT_FOUND EC_ERR(0x05)|EC_CRITICAL
-+#define EC_VAL_CH_INFO_NOT_FOUND EC_ERR(0x06)
-+#define EC_VAL_RX_STATE_RAM_NOT_CLEARED EC_ERR(0x07)|EC_CRITICAL
-+#define EC_VAL_TX_STATE_RAM_NOT_CLEARED EC_ERR(0x08)|EC_CRITICAL
-+#define EC_VAL_MALLOC_DEV_FAILED EC_ERR(0x09)
-+#define EC_VAL_OS_VERSION_NOT_SUPPORTED EC_ERR(0x0A)|EC_CRITICAL
-+#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED EC_ERR(0x0B)|EC_CRITICAL
-+#define EC_VAL_NULL_CPSAR_DEV EC_ERR(0x0C)|EC_CRITICAL
-+
-+#define EC_VAL_LUT_NOT_READY EC_ERR(0x0D)
-+#define EC_VAL_INVALID_CH EC_ERR(0x0E)
-+#define EC_VAL_NULL_CH_STRUCT EC_ERR(0x0F)
-+#define EC_VAL_RX_TEARDOWN_ALREADY_PEND EC_ERR(0x10)
-+#define EC_VAL_TX_TEARDOWN_ALREADY_PEND EC_ERR(0x11)
-+#define EC_VAL_RX_CH_ALREADY_TORNDOWN EC_ERR(0x12)
-+#define EC_VAL_TX_CH_ALREADY_TORNDOWN EC_ERR(0x13)
-+#define EC_VAL_TX_TEARDOWN_TIMEOUT EC_ERR(0x14)
-+#define EC_VAL_RX_TEARDOWN_TIMEOUT EC_ERR(0x15)
-+#define EC_VAL_CH_ALREADY_TORNDOWN EC_ERR(0x16)
-+#define EC_VAL_VC_SETUP_NOT_READY EC_ERR(0x17)
-+#define EC_VAL_VC_TEARDOWN_NOT_READY EC_ERR(0x18)
-+#define EC_VAL_INVALID_VC EC_ERR(0x19)
-+#define EC_VAL_INVALID_LC EC_ERR(0x20)
-+#define EC_VAL_INVALID_VDMA_CH EC_ERR(0x21)
-+#define EC_VAL_INVALID_CID EC_ERR(0x22)
-+#define EC_VAL_INVALID_UUI EC_ERR(0x23)
-+#define EC_VAL_INVALID_UUI_DISCARD EC_ERR(0x24)
-+#define EC_VAL_CH_ALREADY_OPEN EC_ERR(0x25)
-+
-+#define EC_VAL_RCB_MALLOC_FAILED EC_ERR(0x26)
-+#define EC_VAL_RX_BUFFER_MALLOC_FAILED EC_ERR(0x27)
-+#define EC_VAL_OUT_OF_TCBS EC_ERR(0x28)
-+#define EC_VAL_NO_TCBS EC_ERR(0x29)
-+#define EC_VAL_NULL_RCB EC_ERR(0x30)|EC_CRITICAL
-+#define EC_VAL_SOP_ERROR EC_ERR(0x31)|EC_CRITICAL
-+#define EC_VAL_EOP_ERROR EC_ERR(0x32)|EC_CRITICAL
-+#define EC_VAL_NULL_TCB EC_ERR(0x33)|EC_CRITICAL
-+#define EC_VAL_CORRUPT_RCB_CHAIN EC_ERR(0x34)|EC_CRITICAL
-+#define EC_VAL_TCB_MALLOC_FAILED EC_ERR(0x35)
-+
-+#define EC_VAL_DISABLE_POLLING_FAILED EC_ERR(0x36)
-+#define EC_VAL_KEY_NOT_FOUND EC_ERR(0x37)
-+#define EC_VAL_MALLOC_FAILED EC_ERR(0x38)
-+#define EC_VAL_RESET_BASE_NOT_FOUND EC_ERR(0x39)|EC_CRITICAL
-+#define EC_VAL_INVALID_STATE EC_ERR(0x40)
-+#define EC_VAL_NO_TXH_WORK_TO_DO EC_ERR(0x41)
-+#define EC_VAL_NO_TXL_WORK_TO_DO EC_ERR(0x42)
-+#define EC_VAL_NO_RX_WORK_TO_DO EC_ERR(0x43)
-+#define EC_VAL_NOT_LINKED EC_ERR(0x44)
-+#define EC_VAL_INTERRUPT_NOT_FOUND EC_ERR(0x45)
-+#define EC_VAL_OFFSET_NOT_FOUND EC_ERR(0x46)
-+#define EC_VAL_MODULE_ALREADY_CLOSED EC_ERR(0x47)
-+#define EC_VAL_MODULE_ALREADY_SHUTDOWN EC_ERR(0x48)
-+#define EC_VAL_ACTION_NOT_FOUND EC_ERR(0x49)
-+#define EC_VAL_RX_CH_ALREADY_SETUP EC_ERR(0x50)
-+#define EC_VAL_TX_CH_ALREADY_SETUP EC_ERR(0x51)
-+#define EC_VAL_RX_CH_ALREADY_OPEN EC_ERR(0x52)
-+#define EC_VAL_TX_CH_ALREADY_OPEN EC_ERR(0x53)
-+#define EC_VAL_CH_ALREADY_SETUP EC_ERR(0x54)
-+#define EC_VAL_RCB_NEEDS_BUFFER EC_ERR(0x55) /* +GSG 030410 */
-+#define EC_VAL_RCB_DROPPED EC_ERR(0x56) /* +GSG 030410 */
-+#define EC_VAL_INVALID_VALUE EC_ERR(0x57)
-+
-+/**
-+@defgroup shared_data Shared Data Structures
-+
-+The data structures documented here are shared by all modules.
-+*/
-+
-+/**
-+ * @ingroup shared_data
-+ * This is the fragment list structure. Each fragment list entry contains a
-+ * length and a data buffer.
-+ */
-+typedef struct
-+ {
-+ bit32u len; /**< Length of the fragment in bytes (lower 16 bits are valid). For SOP, upper 16 bits is the buffer offset. */
-+ void *data; /**< Pointer to fragment data. */
-+ void *OsInfo; /**< Pointer to OS defined data. */
-+ }FRAGLIST;
-+
-+#if defined (_CPHAL_CPMAC)
-+#define CB_PASSCRC_BIT (1<<26)
-+
-+/* CPMAC CPHAL STATUS */
-+#define CPMAC_STATUS_LINK (1 << 0)
-+#define CPMAC_STATUS_LINK_DUPLEX (1 << 1) /* 0 - HD, 1 - FD */
-+#define CPMAC_STATUS_LINK_SPEED (1 << 2) /* 0 - 10, 1 - 100 */
-+
-+/* ADAPTER CHECK Codes */
-+
-+#define CPMAC_STATUS_ADAPTER_CHECK (1 << 7)
-+#define CPMAC_STATUS_HOST_ERR_DIRECTION (1 << 8)
-+#define CPMAC_STATUS_HOST_ERR_CODE (0xF << 9)
-+#define CPMAC_STATUS_HOST_ERR_CH (0x7 << 13)
-+
-+#define _CPMDIO_DISABLE (1 << 0)
-+#define _CPMDIO_HD (1 << 1)
-+#define _CPMDIO_FD (1 << 2)
-+#define _CPMDIO_10 (1 << 3)
-+#define _CPMDIO_100 (1 << 4)
-+#define _CPMDIO_NEG_OFF (1 << 5)
-+#define _CPMDIO_LOOPBK (1 << 16)
-+#define _CPMDIO_NOPHY (1 << 20)
-+#endif
-+
-+/**
-+ * @ingroup shared_data
-+ * Channel specific configuration information. This structure should be
-+ * populated by upper-layer software prior to calling @c ChannelSetup(). Any
-+ * configuration item that can be changed on a per channel basis should
-+ * be represented here. Each module may define this structure with additional
-+ * module-specific members.
-+ */
-+typedef struct
-+ {
-+ int Channel; /**< Channel number. */
-+ int Direction; /**< DIRECTION_RX(1) or DIRECTION_TX(0). */
-+ OS_SETUP *OsSetup; /**< OS defined information associated with this channel. */
-+
-+#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC)
-+ int RxBufSize; /**< Size (in bytes) for each Rx buffer.*/
-+ int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */
-+ int RxNumBuffers; /**< The number of Rx buffer descriptors to allocate for Ch. */
-+ int RxServiceMax; /**< Maximum number of packets to service at one time. */
-+
-+ int TxNumBuffers; /**< The number of Tx buffer descriptors to allocate for Ch. */
-+ int TxNumQueues; /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */
-+ int TxServiceMax; /**< Maximum number of packets to service at one time. */
-+#endif
-+
-+#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+ int CpcsUU; /**< The 2-byte CPCS UU and CPI information. */
-+ int Gfc; /**< Generic Flow Control. */
-+ int Clp; /**< Cell Loss Priority. */
-+ int Pti; /**< Payload Type Indication. */
-+#endif
-+
-+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+ int DaMask; /**< Specifies whether credit issuance is paused when Tx data not available. */
-+ int Priority; /**< Priority bin this channel will be scheduled within. */
-+ int PktType; /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */
-+ int Vci; /**< Virtual Channel Identifier. */
-+ int Vpi; /**< Virtual Path Identifier. */
-+ int FwdUnkVc; /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */
-+
-+ /* Tx VC State */
-+ int TxVc_CellRate; /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */
-+ int TxVc_QosType; /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */
-+ int TxVc_Mbs; /**< Min Burst Size in cells.*/
-+ int TxVc_Pcr; /**< Peak Cell Rate for VBR in clock ticks between transmissions. */
-+
-+ bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */
-+ int TxVc_OamTc; /**< TC Path to transmit OAM cells for TX connection (0,1). */
-+ int TxVc_VpOffset; /**< Offset to the OAM VP state table. */
-+ /* Rx VC State */
-+ int RxVc_OamCh; /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
-+ int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */
-+ bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */
-+ int RxVc_OamTc; /**< TC Path to transmit OAM cells for RX connection (0,1). */
-+ int RxVc_VpOffset; /**< Offset to the OAM VP state table. */
-+ /* Tx VP State */
-+ int TxVp_OamTc; /**< TC Path to transmit OAM cells for TX VP connection (0,1). */
-+ bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */
-+ /* Rx VP State */
-+ int RxVp_OamCh; /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
-+ int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */
-+ bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */
-+ int RxVp_OamTc; /**< TC Path to transmit OAM cells for RX VP connection (0,1). */
-+ int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */
-+#endif
-+
-+
-+#ifdef _CPHAL_VDMAVT
-+ bit32u RemFifoAddr; /* Mirror mode only. */
-+ bit32u FifoAddr;
-+ bit32 PollInt;
-+ bit32 FifoSize;
-+ int Ready;
-+#endif
-+
-+ }CHANNEL_INFO;
-+
-+/*
-+ * This structure contains each statistic value gathered by the CPHAL.
-+ * Applications may access statistics data by using the @c StatsGet() routine.
-+ */
-+/* STATS */
-+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+typedef struct
-+ {
-+ bit32u CrcErrors[16];
-+ bit32u LenErrors[16];
-+ bit32u DmaLenErrors[16];
-+ bit32u AbortErrors[16];
-+ bit32u StarvErrors[16];
-+ bit32u TxMisQCnt[16][2];
-+ bit32u RxMisQCnt[16];
-+ bit32u RxEOQCnt[16];
-+ bit32u TxEOQCnt[16][2];
-+ bit32u RxPacketsServiced[16];
-+ bit32u TxPacketsServiced[16][2];
-+ bit32u RxMaxServiced;
-+ bit32u TxMaxServiced[16][2];
-+ bit32u RxTotal;
-+ bit32u TxTotal;
-+ } STAT_INFO;
-+#endif
-+
-+/*
-+ * VDMA Channel specific configuration information
-+ */
-+#ifdef _CPHAL_AAL2
-+typedef struct
-+ {
-+ int Ch; /**< Channel Number */
-+ int RemoteEndian; /**< Endianness of remote VDMA-VT device */
-+ int CpsSwap; /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device. When 1, in MS byte. */
-+ }VdmaChInfo;
-+#endif
-+
-+#ifndef _CPHAL
-+ typedef void HAL_DEVICE;
-+ typedef void HAL_PRIVATE;
-+ typedef void HAL_RCB;
-+ typedef void HAL_RECEIVEINFO;
-+#endif
-+
-+/**
-+ * @ingroup shared_data
-+ * The HAL_FUNCTIONS struct defines the function pointers used by upper layer
-+ * software. The upper layer software receives these pointers through the
-+ * call to xxxInitModule().
-+ */
-+typedef struct
-+ {
-+ int (*ChannelSetup) (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup);
-+ int (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode);
-+ int (*Close) (HAL_DEVICE *HalDev, int Mode);
-+ int (*Control) (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+ int (*Init) (HAL_DEVICE *HalDev);
-+ int (*Open) (HAL_DEVICE *HalDev);
-+ int (*PacketProcessEnd) (HAL_DEVICE *HalDev);
-+ int (*Probe) (HAL_DEVICE *HalDev);
-+ int (*RxReturn) (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
-+ int (*Send) (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode);
-+ int (*Shutdown) (HAL_DEVICE *HalDev);
-+ int (*Tick) (HAL_DEVICE *HalDev);
-+
-+#ifdef _CPHAL_AAL5
-+ int (*Kick) (HAL_DEVICE *HalDev, int Queue);
-+ void (*OamFuncConfig) (HAL_DEVICE *HalDev, unsigned int OamConfig);
-+ void (*OamLoopbackConfig) (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag);
-+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+ STAT_INFO* (*StatsGetOld)(HAL_DEVICE *HalDev);
-+#endif
-+ } HAL_FUNCTIONS;
-+
-+/**
-+ * @ingroup shared_data
-+ * The OS_FUNCTIONS struct defines the function pointers for all upper layer
-+ * functions accessible to the CPHAL. The upper layer software is responsible
-+ * for providing the correct OS-specific implementations for the following
-+ * functions. It is populated by calling InitModule() (done by the CPHAL in
-+ * xxxInitModule().
-+ */
-+typedef struct
-+ {
-+ int (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value);
-+ void (*CriticalOn)(void);
-+ void (*CriticalOff)(void);
-+ void (*DataCacheHitInvalidate)(void *MemPtr, int Size);
-+ void (*DataCacheHitWriteback)(void *MemPtr, int Size);
-+ int (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo);
-+ int (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value);
-+ int (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value);
-+ void (*Free)(void *MemPtr);
-+ void (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr);
-+ void (*FreeDev)(void *MemPtr);
-+ void (*FreeDmaXfer)(void *MemPtr);
-+ void (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit);
-+ void (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit);
-+ void* (*Malloc)(bit32u size);
-+ void* (*MallocDev)(bit32u Size);
-+ void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange);
-+ void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange,
-+ OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
-+ OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
-+ void* (*Memset)(void *Dest, int C, bit32u N);
-+ int (*Printf)(const char *Format, ...);
-+ int (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount,
-+ bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode);
-+ int (*SendComplete)(OS_SENDINFO *OsSendInfo);
-+ int (*Sprintf)(char *S, const char *Format, ...);
-+ int (*Strcmpi)(const char *Str1, const char *Str2);
-+ unsigned int (*Strlen)(const char *S);
-+ char* (*Strstr)(const char *S1, const char *S2);
-+ unsigned long (*Strtoul)(const char *Str, char **Endptr, int Base);
-+ void (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction);
-+ } OS_FUNCTIONS;
-+
-+/************** MODULE SPECIFIC STUFF BELOW **************/
-+
-+#ifdef _CPHAL_CPMAC
-+
-+/*
-+int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst);
-+*/
-+
-+int halCpmacInitModule(HAL_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ HAL_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+/*
-+ * @ingroup shared_data
-+ * The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer
-+ * software. The upper layer software receives these pointers through the
-+ * call to cphalInitModule().
-+ */
-+/*
-+typedef struct
-+ {
-+ int (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+ int (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
-+ int (*Close)(HAL_DEVICE *HalDev, int Mode);
-+ int (*Init)(HAL_DEVICE *HalDev);
-+ int (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
-+ int (*Open)(HAL_DEVICE *HalDev);
-+ int (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value);
-+ int (*Probe)(HAL_DEVICE *HalDev);
-+ int (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
-+ int (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount,
-+ int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue,
-+ bit32u Mode);
-+ int (*StatsClear)(HAL_DEVICE *HalDev);
-+ STAT_INFO* (*StatsGet)(HAL_DEVICE *HalDev);
-+ int (*Status)(HAL_DEVICE *HalDev);
-+ void (*Tick)(HAL_DEVICE *HalDev);
-+ int (*Kick)(HAL_DEVICE *HalDev, int Queue);
-+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+ } AAL5_FUNCTIONS;
-+*/
-+
-+int cpaal5InitModule(HAL_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ HAL_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+/**
-+ * @ingroup shared_data
-+ * The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer
-+ * software. The upper layer software receives these pointers through the
-+ * call to cphalInitModule().
-+ */
-+typedef struct
-+ {
-+ int (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+ int (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
-+ int (*Close)(HAL_DEVICE *HalDev, int Mode);
-+ int (*Init)(HAL_DEVICE *HalDev);
-+ int (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
-+ int (*Open)(HAL_DEVICE *HalDev);
-+ int (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value);
-+ int (*Probe)(HAL_DEVICE *HalDev);
-+
-+ int (*StatsClear)(HAL_DEVICE *HalDev);
-+ STAT_INFO* (*StatsGet)(HAL_DEVICE *HalDev);
-+ int (*Status)(HAL_DEVICE *HalDev);
-+ void (*Tick)(HAL_DEVICE *HalDev);
-+ int (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI,
-+ int VdmaCh, int UUIDiscard);
-+ int (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID,
-+ int LC);
-+ int (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh);
-+ int (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr,
-+ VdmaChInfo *VdmaCh);
-+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+ int (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode,
-+ int RxMultiMode, int TxMultiMode, int SchedMode,
-+ int TcCh);
-+ void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch);
-+ int (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch);
-+ } AAL2_FUNCTIONS;
-+
-+int cpaal2InitModule(HAL_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ AAL2_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+#endif
-+
-+#ifdef _CPHAL_VDMAVT
-+/**
-+ * @ingroup shared_data
-+ * The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer
-+ * software. The upper layer software receives these pointers through the
-+ * call to InitModule().
-+ *
-+ * Note that this list is still under definition.
-+ */
-+typedef struct
-+ {
-+ bit32 (*Init)( HAL_DEVICE *VdmaVtDev);
-+ /* bit32 (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
-+ bit32u Addr, bit32u Size, bit32u PollInt);
-+ bit32 (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
-+ bit32u Addr, bit32u Size, bit32u PollInt); */
-+ bit32 (*Tx)(HAL_DEVICE *VdmaVtDev);
-+ bit32 (*Rx)(HAL_DEVICE *VdmaVtDev);
-+ bit32 (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr,
-+ bit32u RemDevID);
-+ bit32 (*ClearRxInt)(HAL_DEVICE *VdmaVtDev);
-+ bit32 (*ClearTxInt)(HAL_DEVICE *VdmaVtDev);
-+ bit32 (*Open)(HAL_DEVICE *VdmaVtDev);
-+ bit32 (*Close)(HAL_DEVICE *VdmaVtDev);
-+ int (*Control) (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+ int (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+ int (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode);
-+ int (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount,
-+ int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode);
-+ } VDMA_FUNCTIONS;
-+
-+int VdmaInitModule(HAL_DEVICE **VdmaVt,
-+ OS_DEVICE *OsDev,
-+ VDMA_FUNCTIONS **VdmaVtFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+#endif
-+
-+/*
-+extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc,
-+ int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u),
-+ int *Size, int Inst);
-+*/
-+
-+
-+#ifdef _CPHAL_AAL5
-+extern const char hcSarFrequency[];
-+#endif
-+
-+#ifdef _CPHAL_CPMAC
-+/* following will be common, once 'utl' added */
-+extern const char hcClear[];
-+extern const char hcGet[];
-+extern const char hcSet[];
-+extern const char hcTick[];
-+
-+extern const char hcCpuFrequency[];
-+extern const char hcCpmacFrequency[];
-+extern const char hcMdioBusFrequency[];
-+extern const char hcMdioClockFrequency[];
-+extern const char hcCpmacBase[];
-+extern const char hcPhyNum[];
-+extern const char hcSize[];
-+extern const char hcCpmacSize[];
-+extern const char hcPhyAccess[];
-+#endif
-+
-+#endif /* end of _INC_ */
-diff -urN linux.old/drivers/atm/sangam_atm/cpswhal_cpsar.h linux.dev/drivers/atm/sangam_atm/cpswhal_cpsar.h
---- linux.old/drivers/atm/sangam_atm/cpswhal_cpsar.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/cpswhal_cpsar.h 2005-08-23 04:46:50.089844912 +0200
-@@ -0,0 +1,629 @@
-+/************************************************************************
-+ * TNETDxxxx Software Support
-+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved.
-+ *
-+ * FILE: cphal.h
-+ *
-+ * DESCRIPTION:
-+ * User include file, contains data definitions shared between the CPHAL
-+ * and the upper-layer software.
-+ *
-+ * HISTORY:
-+ * Date Modifier Ver Notes
-+ * 28Feb02 Greg 1.00 Original
-+ * 06Mar02 Greg 1.01 Documentation enhanced
-+ * 18Jul02 Greg 1.02 Many updates (OAM additions, general reorg)
-+ * 22Nov02 Mick RC2 Additions from Denis' input on Control
-+ *
-+ * author Greg Guyotte
-+ * version 1.02
-+ * date 18-Jul-2002
-+ *****************************************************************************/
-+#ifndef _INC_CPHAL_H
-+#define _INC_CPHAL_H
-+
-+#ifdef _CPHAL_CPMAC
-+#include "ec_errors_cpmac.h"
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+#include "ec_errors_cpaal5.h"
-+#endif
-+
-+#ifdef _CPHAL_CPSAR
-+#include "ec_errors_cpsar.h"
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+#include "ec_errors_cpaal2.h"
-+#endif
-+
-+#ifndef __ADAM2
-+typedef char bit8;
-+typedef short bit16;
-+typedef int bit32;
-+
-+typedef unsigned char bit8u;
-+typedef unsigned short bit16u;
-+typedef unsigned int bit32u;
-+
-+/*
-+typedef char INT8;
-+typedef short INT16;
-+typedef int INT32;
-+typedef unsigned char UINT8;
-+typedef unsigned short UINT16;
-+typedef unsigned int UINT32;
-+*/
-+/*typedef unsigned int size_t;*/
-+#endif
-+
-+#ifdef _CPHAL
-+
-+#ifndef TRUE
-+#define TRUE (1==1)
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE (1==2)
-+#endif
-+
-+#ifndef NULL
-+#define NULL 0
-+#endif
-+
-+#endif
-+
-+#define VirtToPhys(a) (((int)a)&~0xe0000000)
-+#define VirtToVirtNoCache(a) ((void*)((VirtToPhys(a))|0xa0000000))
-+#define VirtToVirtCache(a) ((void*)((VirtToPhys(a))|0x80000000))
-+#define PhysToVirtNoCache(a) ((void*)(((int)a)|0xa0000000))
-+#define PhysToVirtCache(a) ((void*)(((int)a)|0x80000000))
-+/*
-+#define DataCacheHitInvalidate(a) {__asm__(" cache 17, (%0)" : : "r" (a));}
-+#define DataCacheHitWriteback(a) {__asm__(" cache 25, (%0)" : : "r" (a));}
-+*/
-+
-+#define PARTIAL 1 /**< Used in @c Close() and @c ChannelTeardown() */
-+#define FULL 2 /**< Used in @c Close() and @c ChannelTeardown() */
-+
-+/* Channel Teardown Defines */
-+#define RX_TEARDOWN 2
-+#define TX_TEARDOWN 1
-+#define BLOCKING_TEARDOWN 8
-+#define FULL_TEARDOWN 4
-+#define PARTIAL_TEARDOWN 0
-+
-+#define MAX_DIR 2
-+#define DIRECTION_TX 0
-+#define DIRECTION_RX 1
-+#define TX_CH 0
-+#define RX_CH 1
-+#define HAL_ERROR_DEVICE_NOT_FOUND 1
-+#define HAL_ERROR_FAILED_MALLOC 2
-+#define HAL_ERROR_OSFUNC_SIZE 3
-+#define HAL_DEFAULT 0xFFFFFFFF
-+#define VALID(val) (val!=HAL_DEFAULT)
-+
-+/*
-+ERROR REPORTING
-+
-+HAL Module Codes. Each HAL module reporting an error code
-+should OR the error code with the respective Module error code
-+from the list below.
-+*/
-+#define EC_AAL5 EC_HAL|EC_DEV_AAL5
-+#define EC_AAL2 EC_HAL|EC_DEV_AAL2
-+#define EC_CPSAR EC_HAL|EC_DEV_CPSAR
-+#define EC_CPMAC EC_HAL|EC_DEV_CPMAC
-+#define EC_VDMA EC_HAL|EC_DEV_VDMA
-+#define EC_VLYNQ EC_HAL|EC_DEV_VLYNQ
-+#define EC_CPPI EC_HAL|EC_DEV_CPPI
-+
-+/*
-+HAL Function Codes. Each HAL module reporting an error code
-+should OR the error code with one of the function codes from
-+the list below.
-+*/
-+#define EC_FUNC_HAL_INIT EC_FUNC(1)
-+#define EC_FUNC_CHSETUP EC_FUNC(2)
-+#define EC_FUNC_CHTEARDOWN EC_FUNC(3)
-+#define EC_FUNC_RXRETURN EC_FUNC(4)
-+#define EC_FUNC_SEND EC_FUNC(5)
-+#define EC_FUNC_RXINT EC_FUNC(6)
-+#define EC_FUNC_TXINT EC_FUNC(7)
-+#define EC_FUNC_AAL2_VDMA EC_FUNC(8)
-+#define EC_FUNC_OPTIONS EC_FUNC(9)
-+#define EC_FUNC_PROBE EC_FUNC(10)
-+#define EC_FUNC_OPEN EC_FUNC(11)
-+#define EC_FUNC_CONTROL EC_FUNC(12)
-+#define EC_FUNC_DEVICE_INT EC_FUNC(13)
-+#define EC_FUNC_STATUS EC_FUNC(14)
-+#define EC_FUNC_TICK EC_FUNC(15)
-+#define EC_FUNC_CLOSE EC_FUNC(16)
-+#define EC_FUNC_SHUTDOWN EC_FUNC(17)
-+#define EC_FUNC_DEVICE_INT_ALT EC_FUNC(18) /* +GSG 030306 */
-+
-+/*
-+HAL Error Codes. The list below defines every type of error
-+used in all HAL modules. DO NOT CHANGE THESE VALUES! Add new
-+values in integer order to the bottom of the list.
-+*/
-+#define EC_VAL_PDSP_LOAD_FAIL EC_ERR(0x01)|EC_CRITICAL
-+#define EC_VAL_FIRMWARE_TOO_LARGE EC_ERR(0x02)|EC_CRITICAL
-+#define EC_VAL_DEVICE_NOT_FOUND EC_ERR(0x03)|EC_CRITICAL
-+#define EC_VAL_BASE_ADDR_NOT_FOUND EC_ERR(0x04)|EC_CRITICAL
-+#define EC_VAL_RESET_BIT_NOT_FOUND EC_ERR(0x05)|EC_CRITICAL
-+#define EC_VAL_CH_INFO_NOT_FOUND EC_ERR(0x06)
-+#define EC_VAL_RX_STATE_RAM_NOT_CLEARED EC_ERR(0x07)|EC_CRITICAL
-+#define EC_VAL_TX_STATE_RAM_NOT_CLEARED EC_ERR(0x08)|EC_CRITICAL
-+#define EC_VAL_MALLOC_DEV_FAILED EC_ERR(0x09)
-+#define EC_VAL_OS_VERSION_NOT_SUPPORTED EC_ERR(0x0A)|EC_CRITICAL
-+#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED EC_ERR(0x0B)|EC_CRITICAL
-+#define EC_VAL_NULL_CPSAR_DEV EC_ERR(0x0C)|EC_CRITICAL
-+
-+#define EC_VAL_LUT_NOT_READY EC_ERR(0x0D)
-+#define EC_VAL_INVALID_CH EC_ERR(0x0E)
-+#define EC_VAL_NULL_CH_STRUCT EC_ERR(0x0F)
-+#define EC_VAL_RX_TEARDOWN_ALREADY_PEND EC_ERR(0x10)
-+#define EC_VAL_TX_TEARDOWN_ALREADY_PEND EC_ERR(0x11)
-+#define EC_VAL_RX_CH_ALREADY_TORNDOWN EC_ERR(0x12)
-+#define EC_VAL_TX_CH_ALREADY_TORNDOWN EC_ERR(0x13)
-+#define EC_VAL_TX_TEARDOWN_TIMEOUT EC_ERR(0x14)
-+#define EC_VAL_RX_TEARDOWN_TIMEOUT EC_ERR(0x15)
-+#define EC_VAL_CH_ALREADY_TORNDOWN EC_ERR(0x16)
-+#define EC_VAL_VC_SETUP_NOT_READY EC_ERR(0x17)
-+#define EC_VAL_VC_TEARDOWN_NOT_READY EC_ERR(0x18)
-+#define EC_VAL_INVALID_VC EC_ERR(0x19)
-+#define EC_VAL_INVALID_LC EC_ERR(0x20)
-+#define EC_VAL_INVALID_VDMA_CH EC_ERR(0x21)
-+#define EC_VAL_INVALID_CID EC_ERR(0x22)
-+#define EC_VAL_INVALID_UUI EC_ERR(0x23)
-+#define EC_VAL_INVALID_UUI_DISCARD EC_ERR(0x24)
-+#define EC_VAL_CH_ALREADY_OPEN EC_ERR(0x25)
-+
-+#define EC_VAL_RCB_MALLOC_FAILED EC_ERR(0x26)
-+#define EC_VAL_RX_BUFFER_MALLOC_FAILED EC_ERR(0x27)
-+#define EC_VAL_OUT_OF_TCBS EC_ERR(0x28)
-+#define EC_VAL_NO_TCBS EC_ERR(0x29)
-+#define EC_VAL_NULL_RCB EC_ERR(0x30)|EC_CRITICAL
-+#define EC_VAL_SOP_ERROR EC_ERR(0x31)|EC_CRITICAL
-+#define EC_VAL_EOP_ERROR EC_ERR(0x32)|EC_CRITICAL
-+#define EC_VAL_NULL_TCB EC_ERR(0x33)|EC_CRITICAL
-+#define EC_VAL_CORRUPT_RCB_CHAIN EC_ERR(0x34)|EC_CRITICAL
-+#define EC_VAL_TCB_MALLOC_FAILED EC_ERR(0x35)
-+
-+#define EC_VAL_DISABLE_POLLING_FAILED EC_ERR(0x36)
-+#define EC_VAL_KEY_NOT_FOUND EC_ERR(0x37)
-+#define EC_VAL_MALLOC_FAILED EC_ERR(0x38)
-+#define EC_VAL_RESET_BASE_NOT_FOUND EC_ERR(0x39)|EC_CRITICAL
-+#define EC_VAL_INVALID_STATE EC_ERR(0x40)
-+#define EC_VAL_NO_TXH_WORK_TO_DO EC_ERR(0x41)
-+#define EC_VAL_NO_TXL_WORK_TO_DO EC_ERR(0x42)
-+#define EC_VAL_NO_RX_WORK_TO_DO EC_ERR(0x43)
-+#define EC_VAL_NOT_LINKED EC_ERR(0x44)
-+#define EC_VAL_INTERRUPT_NOT_FOUND EC_ERR(0x45)
-+#define EC_VAL_OFFSET_NOT_FOUND EC_ERR(0x46)
-+#define EC_VAL_MODULE_ALREADY_CLOSED EC_ERR(0x47)
-+#define EC_VAL_MODULE_ALREADY_SHUTDOWN EC_ERR(0x48)
-+#define EC_VAL_ACTION_NOT_FOUND EC_ERR(0x49)
-+#define EC_VAL_RX_CH_ALREADY_SETUP EC_ERR(0x50)
-+#define EC_VAL_TX_CH_ALREADY_SETUP EC_ERR(0x51)
-+#define EC_VAL_RX_CH_ALREADY_OPEN EC_ERR(0x52)
-+#define EC_VAL_TX_CH_ALREADY_OPEN EC_ERR(0x53)
-+#define EC_VAL_CH_ALREADY_SETUP EC_ERR(0x54)
-+#define EC_VAL_RCB_NEEDS_BUFFER EC_ERR(0x55) /* +GSG 030410 */
-+#define EC_VAL_RCB_DROPPED EC_ERR(0x56) /* +GSG 030410 */
-+#define EC_VAL_INVALID_VALUE EC_ERR(0x57)
-+
-+/**
-+@defgroup shared_data Shared Data Structures
-+
-+The data structures documented here are shared by all modules.
-+*/
-+
-+/**
-+ * @ingroup shared_data
-+ * This is the fragment list structure. Each fragment list entry contains a
-+ * length and a data buffer.
-+ */
-+typedef struct
-+ {
-+ bit32u len; /**< Length of the fragment in bytes (lower 16 bits are valid). For SOP, upper 16 bits is the buffer offset. */
-+ void *data; /**< Pointer to fragment data. */
-+ void *OsInfo; /**< Pointer to OS defined data. */
-+ }FRAGLIST;
-+
-+#if defined (_CPHAL_CPMAC)
-+#define CB_PASSCRC_BIT (1<<26)
-+
-+/* CPMAC CPHAL STATUS */
-+#define CPMAC_STATUS_LINK (1 << 0)
-+#define CPMAC_STATUS_LINK_DUPLEX (1 << 1) /* 0 - HD, 1 - FD */
-+#define CPMAC_STATUS_LINK_SPEED (1 << 2) /* 0 - 10, 1 - 100 */
-+
-+/* ADAPTER CHECK Codes */
-+
-+#define CPMAC_STATUS_ADAPTER_CHECK (1 << 7)
-+#define CPMAC_STATUS_HOST_ERR_DIRECTION (1 << 8)
-+#define CPMAC_STATUS_HOST_ERR_CODE (0xF << 9)
-+#define CPMAC_STATUS_HOST_ERR_CH (0x7 << 13)
-+
-+#define _CPMDIO_DISABLE (1 << 0)
-+#define _CPMDIO_HD (1 << 1)
-+#define _CPMDIO_FD (1 << 2)
-+#define _CPMDIO_10 (1 << 3)
-+#define _CPMDIO_100 (1 << 4)
-+#define _CPMDIO_NEG_OFF (1 << 5)
-+#define _CPMDIO_LOOPBK (1 << 16)
-+#define _CPMDIO_NOPHY (1 << 20)
-+#endif
-+
-+/**
-+ * @ingroup shared_data
-+ * Channel specific configuration information. This structure should be
-+ * populated by upper-layer software prior to calling @c ChannelSetup(). Any
-+ * configuration item that can be changed on a per channel basis should
-+ * be represented here. Each module may define this structure with additional
-+ * module-specific members.
-+ */
-+typedef struct
-+ {
-+ int Channel; /**< Channel number. */
-+ int Direction; /**< DIRECTION_RX(1) or DIRECTION_TX(0). */
-+ OS_SETUP *OsSetup; /**< OS defined information associated with this channel. */
-+
-+#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC)
-+ int RxBufSize; /**< Size (in bytes) for each Rx buffer.*/
-+ int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */
-+ int RxNumBuffers; /**< The number of Rx buffer descriptors to allocate for Ch. */
-+ int RxServiceMax; /**< Maximum number of packets to service at one time. */
-+
-+ int TxNumBuffers; /**< The number of Tx buffer descriptors to allocate for Ch. */
-+ int TxNumQueues; /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */
-+ int TxServiceMax; /**< Maximum number of packets to service at one time. */
-+#endif
-+
-+#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+ int CpcsUU; /**< The 2-byte CPCS UU and CPI information. */
-+ int Gfc; /**< Generic Flow Control. */
-+ int Clp; /**< Cell Loss Priority. */
-+ int Pti; /**< Payload Type Indication. */
-+#endif
-+
-+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+ int DaMask; /**< Specifies whether credit issuance is paused when Tx data not available. */
-+ int Priority; /**< Priority bin this channel will be scheduled within. */
-+ int PktType; /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */
-+ int Vci; /**< Virtual Channel Identifier. */
-+ int Vpi; /**< Virtual Path Identifier. */
-+ int FwdUnkVc; /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */
-+
-+ /* Tx VC State */
-+ int TxVc_CellRate; /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */
-+ int TxVc_QosType; /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */
-+ int TxVc_Mbs; /**< Min Burst Size in cells.*/
-+ int TxVc_Pcr; /**< Peak Cell Rate for VBR in clock ticks between transmissions. */
-+
-+ bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */
-+ int TxVc_OamTc; /**< TC Path to transmit OAM cells for TX connection (0,1). */
-+ int TxVc_VpOffset; /**< Offset to the OAM VP state table. */
-+ /* Rx VC State */
-+ int RxVc_OamCh; /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
-+ int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */
-+ bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */
-+ int RxVc_OamTc; /**< TC Path to transmit OAM cells for RX connection (0,1). */
-+ int RxVc_VpOffset; /**< Offset to the OAM VP state table. */
-+ /* Tx VP State */
-+ int TxVp_OamTc; /**< TC Path to transmit OAM cells for TX VP connection (0,1). */
-+ bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */
-+ /* Rx VP State */
-+ int RxVp_OamCh; /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */
-+ int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */
-+ bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */
-+ int RxVp_OamTc; /**< TC Path to transmit OAM cells for RX VP connection (0,1). */
-+ int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */
-+#endif
-+
-+
-+#ifdef _CPHAL_VDMAVT
-+ bit32u RemFifoAddr; /* Mirror mode only. */
-+ bit32u FifoAddr;
-+ bit32 PollInt;
-+ bit32 FifoSize;
-+ int Ready;
-+#endif
-+
-+ }CHANNEL_INFO;
-+
-+/*
-+ * This structure contains each statistic value gathered by the CPHAL.
-+ * Applications may access statistics data by using the @c StatsGet() routine.
-+ */
-+/* STATS */
-+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR)
-+typedef struct
-+ {
-+ bit32u CrcErrors[16];
-+ bit32u LenErrors[16];
-+ bit32u DmaLenErrors[16];
-+ bit32u AbortErrors[16];
-+ bit32u StarvErrors[16];
-+ bit32u TxMisQCnt[16][2];
-+ bit32u RxMisQCnt[16];
-+ bit32u RxEOQCnt[16];
-+ bit32u TxEOQCnt[16][2];
-+ bit32u RxPacketsServiced[16];
-+ bit32u TxPacketsServiced[16][2];
-+ bit32u RxMaxServiced;
-+ bit32u TxMaxServiced[16][2];
-+ bit32u RxTotal;
-+ bit32u TxTotal;
-+ } STAT_INFO;
-+#endif
-+
-+/*
-+ * VDMA Channel specific configuration information
-+ */
-+#ifdef _CPHAL_AAL2
-+typedef struct
-+ {
-+ int Ch; /**< Channel Number */
-+ int RemoteEndian; /**< Endianness of remote VDMA-VT device */
-+ int CpsSwap; /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device. When 1, in MS byte. */
-+ }VdmaChInfo;
-+#endif
-+
-+#ifndef _CPHAL
-+ typedef void HAL_DEVICE;
-+ typedef void HAL_PRIVATE;
-+ typedef void HAL_RCB;
-+ typedef void HAL_RECEIVEINFO;
-+#endif
-+
-+/**
-+ * @ingroup shared_data
-+ * The HAL_FUNCTIONS struct defines the function pointers used by upper layer
-+ * software. The upper layer software receives these pointers through the
-+ * call to xxxInitModule().
-+ */
-+typedef struct
-+ {
-+ int (*ChannelSetup) (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup);
-+ int (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode);
-+ int (*Close) (HAL_DEVICE *HalDev, int Mode);
-+ int (*Control) (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+ int (*Init) (HAL_DEVICE *HalDev);
-+ int (*Open) (HAL_DEVICE *HalDev);
-+ int (*PacketProcessEnd) (HAL_DEVICE *HalDev);
-+ int (*Probe) (HAL_DEVICE *HalDev);
-+ int (*RxReturn) (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
-+ int (*Send) (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode);
-+ int (*Shutdown) (HAL_DEVICE *HalDev);
-+ int (*Tick) (HAL_DEVICE *HalDev);
-+
-+#ifdef _CPHAL_AAL5
-+ int (*Kick) (HAL_DEVICE *HalDev, int Queue);
-+ void (*OamFuncConfig) (HAL_DEVICE *HalDev, unsigned int OamConfig);
-+ void (*OamLoopbackConfig) (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag);
-+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+ STAT_INFO* (*StatsGetOld)(HAL_DEVICE *HalDev);
-+#endif
-+ } HAL_FUNCTIONS;
-+
-+/**
-+ * @ingroup shared_data
-+ * The OS_FUNCTIONS struct defines the function pointers for all upper layer
-+ * functions accessible to the CPHAL. The upper layer software is responsible
-+ * for providing the correct OS-specific implementations for the following
-+ * functions. It is populated by calling InitModule() (done by the CPHAL in
-+ * xxxInitModule().
-+ */
-+typedef struct
-+ {
-+ int (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value);
-+ void (*CriticalOn)(void);
-+ void (*CriticalOff)(void);
-+ void (*DataCacheHitInvalidate)(void *MemPtr, int Size);
-+ void (*DataCacheHitWriteback)(void *MemPtr, int Size);
-+ int (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo);
-+ int (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value);
-+ int (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value);
-+ void (*Free)(void *MemPtr);
-+ void (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr);
-+ void (*FreeDev)(void *MemPtr);
-+ void (*FreeDmaXfer)(void *MemPtr);
-+ void (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit);
-+ void (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit);
-+ void* (*Malloc)(bit32u size);
-+ void* (*MallocDev)(bit32u Size);
-+ void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange);
-+ void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange,
-+ OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo,
-+ OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev);
-+ void* (*Memset)(void *Dest, int C, bit32u N);
-+ int (*Printf)(const char *Format, ...);
-+ int (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount,
-+ bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode);
-+ int (*SendComplete)(OS_SENDINFO *OsSendInfo);
-+ int (*Sprintf)(char *S, const char *Format, ...);
-+ int (*Strcmpi)(const char *Str1, const char *Str2);
-+ unsigned int (*Strlen)(const char *S);
-+ char* (*Strstr)(const char *S1, const char *S2);
-+ unsigned long (*Strtoul)(const char *Str, char **Endptr, int Base);
-+ void (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction);
-+ } OS_FUNCTIONS;
-+
-+/************** MODULE SPECIFIC STUFF BELOW **************/
-+
-+#ifdef _CPHAL_CPMAC
-+
-+/*
-+int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst);
-+*/
-+
-+int halCpmacInitModule(HAL_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ HAL_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+#endif
-+
-+#ifdef _CPHAL_AAL5
-+/*
-+ * @ingroup shared_data
-+ * The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer
-+ * software. The upper layer software receives these pointers through the
-+ * call to cphalInitModule().
-+ */
-+/*
-+typedef struct
-+ {
-+ int (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+ int (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
-+ int (*Close)(HAL_DEVICE *HalDev, int Mode);
-+ int (*Init)(HAL_DEVICE *HalDev);
-+ int (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
-+ int (*Open)(HAL_DEVICE *HalDev);
-+ int (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value);
-+ int (*Probe)(HAL_DEVICE *HalDev);
-+ int (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag);
-+ int (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount,
-+ int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue,
-+ bit32u Mode);
-+ int (*StatsClear)(HAL_DEVICE *HalDev);
-+ STAT_INFO* (*StatsGet)(HAL_DEVICE *HalDev);
-+ int (*Status)(HAL_DEVICE *HalDev);
-+ void (*Tick)(HAL_DEVICE *HalDev);
-+ int (*Kick)(HAL_DEVICE *HalDev, int Queue);
-+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+ } AAL5_FUNCTIONS;
-+*/
-+
-+int cpaal5InitModule(HAL_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ HAL_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+#endif
-+
-+#ifdef _CPHAL_AAL2
-+/**
-+ * @ingroup shared_data
-+ * The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer
-+ * software. The upper layer software receives these pointers through the
-+ * call to cphalInitModule().
-+ */
-+typedef struct
-+ {
-+ int (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+ int (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode);
-+ int (*Close)(HAL_DEVICE *HalDev, int Mode);
-+ int (*Init)(HAL_DEVICE *HalDev);
-+ int (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms);
-+ int (*Open)(HAL_DEVICE *HalDev);
-+ int (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value);
-+ int (*Probe)(HAL_DEVICE *HalDev);
-+
-+ int (*StatsClear)(HAL_DEVICE *HalDev);
-+ STAT_INFO* (*StatsGet)(HAL_DEVICE *HalDev);
-+ int (*Status)(HAL_DEVICE *HalDev);
-+ void (*Tick)(HAL_DEVICE *HalDev);
-+ int (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI,
-+ int VdmaCh, int UUIDiscard);
-+ int (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID,
-+ int LC);
-+ int (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh);
-+ int (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr,
-+ VdmaChInfo *VdmaCh);
-+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset);
-+ int (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode,
-+ int RxMultiMode, int TxMultiMode, int SchedMode,
-+ int TcCh);
-+ void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch);
-+ int (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch);
-+ } AAL2_FUNCTIONS;
-+
-+int cpaal2InitModule(HAL_DEVICE **HalDev,
-+ OS_DEVICE *OsDev,
-+ AAL2_FUNCTIONS **HalFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+#endif
-+
-+#ifdef _CPHAL_VDMAVT
-+/**
-+ * @ingroup shared_data
-+ * The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer
-+ * software. The upper layer software receives these pointers through the
-+ * call to InitModule().
-+ *
-+ * Note that this list is still under definition.
-+ */
-+typedef struct
-+ {
-+ bit32 (*Init)( HAL_DEVICE *VdmaVtDev);
-+ /* bit32 (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
-+ bit32u Addr, bit32u Size, bit32u PollInt);
-+ bit32 (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem,
-+ bit32u Addr, bit32u Size, bit32u PollInt); */
-+ bit32 (*Tx)(HAL_DEVICE *VdmaVtDev);
-+ bit32 (*Rx)(HAL_DEVICE *VdmaVtDev);
-+ bit32 (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr,
-+ bit32u RemDevID);
-+ bit32 (*ClearRxInt)(HAL_DEVICE *VdmaVtDev);
-+ bit32 (*ClearTxInt)(HAL_DEVICE *VdmaVtDev);
-+ bit32 (*Open)(HAL_DEVICE *VdmaVtDev);
-+ bit32 (*Close)(HAL_DEVICE *VdmaVtDev);
-+ int (*Control) (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value);
-+ int (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup);
-+ int (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode);
-+ int (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount,
-+ int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode);
-+ } VDMA_FUNCTIONS;
-+
-+int VdmaInitModule(HAL_DEVICE **VdmaVt,
-+ OS_DEVICE *OsDev,
-+ VDMA_FUNCTIONS **VdmaVtFunc,
-+ OS_FUNCTIONS *OsFunc,
-+ int OsFuncSize,
-+ int *HalFuncSize,
-+ int Inst);
-+#endif
-+
-+/*
-+extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc,
-+ int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u),
-+ int *Size, int Inst);
-+*/
-+
-+
-+#ifdef _CPHAL_AAL5
-+extern const char hcSarFrequency[];
-+#endif
-+
-+#ifdef _CPHAL_CPMAC
-+/* following will be common, once 'utl' added */
-+extern const char hcClear[];
-+extern const char hcGet[];
-+extern const char hcSet[];
-+extern const char hcTick[];
-+
-+extern const char hcCpuFrequency[];
-+extern const char hcCpmacFrequency[];
-+extern const char hcMdioBusFrequency[];
-+extern const char hcMdioClockFrequency[];
-+extern const char hcCpmacBase[];
-+extern const char hcPhyNum[];
-+extern const char hcSize[];
-+extern const char hcCpmacSize[];
-+extern const char hcPhyAccess[];
-+#endif
-+
-+#endif /* end of _INC_ */
-diff -urN linux.old/drivers/atm/sangam_atm/dev_host_interface.h linux.dev/drivers/atm/sangam_atm/dev_host_interface.h
---- linux.old/drivers/atm/sangam_atm/dev_host_interface.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dev_host_interface.h 2005-08-23 04:46:50.091844608 +0200
-@@ -0,0 +1,1162 @@
-+#ifndef __DEV_HOST_INTERFACE_H__
-+#define __DEV_HOST_INTERFACE_H__ 1
-+
-+/*******************************************************************************
-+* FILE PURPOSE: Public header file for the Host-to-DSP interface
-+********************************************************************************
-+*
-+* TEXAS INSTRUMENTS PROPRIETARTY INFORMATION
-+*
-+* (C) Copyright Texas Instruments Inc. 2002. All rights reserved.
-+*
-+* Property of Texas Instruments Incorporated
-+*
-+* Restricted Rights - Use, duplication, or disclosure is subject to
-+* restrictions set forth in TI's program license agreement and
-+* associated documentation
-+*
-+*
-+* FILE NAME: dev_host_interface.h
-+*
-+* DESCRIPTION:
-+* This header file defines the variables and parameters used between the
-+* host processor and the DSP. This file is included in both the DSP
-+* software and the host software.
-+*
-+* RULES FOR MODIFICATION AND USE OF THIS FILE:
-+*
-+* --The main pointer to the struct of pointers will always be at the same fixed
-+* location (0x80000000).
-+*
-+* --Each pointer element in the struct of pointers (indicated by the main pointer)
-+* will always point to a struct only.
-+*
-+* --Any new structures added to the host interface in subsequent versions must
-+* each have a corresponding new pointer element added to the END of the struct
-+* of pointers. Other than this, there will never be any moving or rearranging
-+* of the pointer elements in the struct of pointers.
-+*
-+* --Any new elements added to existing structures will be added at the END of the
-+* structure. Other than this, there will never be any moving or rearranging
-+* of structure elements.
-+*
-+* --A new structure will never be added as a new element in an old structure.
-+* New structures must be added separately with a new entry in the struct of
-+* pointers, as noted above.
-+*
-+* --Also, the sizes of existing arrays within old structures will never be changed.
-+*
-+* --The modem code in the DSP will never reference the struct of pointers in order
-+* to avoid aliasing issues in the DSP code. The modem code will only use the
-+* specific structures directly.
-+*
-+* --The host processor never accesses the DSP side of the ATM-TC hardware directly.
-+* The DSP interfaces directly to the ATM-TC hardware and relays information to
-+* the host processor through the host interface.
-+*
-+* --The host processor can track the modem's transition through important states
-+* by accessing the Modem State Bit Field in the host interface. Each bit in
-+* the bit field represents an important state to track in the modem. As the
-+* modem transitions through each important state, the corresponding bit will
-+* change from a zero to a one. Each bit in the bit field will only be reset to
-+* zero if the modem retrains. If new states need to be tracked and are added
-+* in subsequent versions of the host interface, a corresponding bit will be
-+* added at the END of the bit field to ensure backwards compatibility. The
-+* Modem State Bit Field is reset if the modem retrains or falls out of Showtime.
-+*
-+* --An interrupt will be sent to the host processor when a change occurs in the
-+* Modem State Bit Field. There is an interrupt masking register which can mask
-+* specific interrupts corresponding to the bits of the Modem State Bit Field.
-+* This allows the host to keep an interrupt from being generated for those
-+* states that are masked.
-+*
-+* HISTORY:
-+*
-+* 11/20/02 J. Bergsagel Written from the previous host interface file
-+* 11/27/02 J. Bergsagel Added comments for mailbox control struct and
-+* fixed a couple items for overlay page stuff.
-+* Also, added temporary elements for SWTC code.
-+* 12/04/02 J. Bergsagel Added extra dummy byte to DEV_HOST_eocVarDef_t
-+* for proper word alignment.
-+* 12/12/02 J. Bergsagel Changed initial states in the modem state bit field
-+* and added more instructions for adding more states.
-+* 12/16/02 J. Bergsagel Changed name "hostVersion_p" to "hostIntfcVersion_p".
-+* Removed dspAturState from DEV_HOST_modemStateBitField_t.
-+* Reorganized several struct elements to clean up the
-+* host interface.
-+* 12/27/02 Sameer V Added missing channel 0 statistics for TC. Added
-+* ocd error information.
-+* 12/27/02 Sameer V Added overlayState to OlayDP_Parms to indicate whether
-+* overlays are being executed in current state.
-+* 01/06/03 J. Bergsagel Added maxAllowedMargin and minRequiredMargin to
-+* DEV_HOST_msg_t.
-+* Renamed TC chan 1 items to be chan 0 items to start out.
-+* 01/17/03 Sameer V Moved delineationState to atmStats structure.
-+* 01/21/03 Barnett Implemented Ax7 UNIT-MODULE modular software framework.
-+* 01/22/03 J. Bergsagel Added warning comments for certain struct typedefs.
-+* 01/23/03 C. Perez-N. Removed old AX5-only diags. command/response entries in the
-+* HOST and DSP ennumerations, and added the AX7 new ones
-+* Added pointer entries in the DEV_HOST_dspOamSharedInterface_t
-+* structure pointing to the analog diags. input/output/options
-+* structures.
-+* 01/29/03 Sameer V Removed TC_IDLE in enum for delineation state. Hardware
-+* only reports TC_HUNT, TC_PRESYNC and TC_SYNC.
-+* 03/07/03 Sameer/Jonathan Put SWTC token around structs and elements only used by SWTC
-+* 03/12/03 Mannering Add CO profile data structures
-+* 03/18/03 J. Bergsagel Removed the obsolete DSP_CHECK_TC response message.
-+* 03/24/03 J. Bergsagel Added DEV_HOST_hostInterruptMask_t for masking DSP interrupt sources
-+* 03/28/03 C. Perez-N Changed the C-style comments and made them C++ sytle instead.
-+* Replaced the occurrences of "SINT32 *" pointer declarations with
-+* "PSINT32"
-+* 03/28/03 Mannering Update CO profile data structures
-+* 04/04/03 S. Yim Add host I/F hooks for switchable hybrid and RJ11
-+* inner/outer pair selection
-+* 04/11/03 J. Bergsagel Changed modem state bit field struct types to enums instead and used
-+* a single integer variable for each "bitfield".
-+* Changed bit field for host interrupt masks to an integer value also.
-+* 04/14/03 J. Bergsagel Changed name of table pointer "meanSquareTblDstrm_p" to "marginTblDstrm_p".
-+* 04/03/03 Umesh Iyer CMsg1 and RMsg1 use the same storage as CMSGPCB and RMSGPCB.
-+* The string lengths for these have been adjusted to hold the longest
-+* message in each case. The PCB messages from ADSL2 are longer.
-+* 04/21/03 Sameeer V Added new host mailbox message for shutting down the DSLSS peripherals.
-+* 04/23/03 J. Bergsagel Fixed comments for overlay mailbox messages and for losErrors.
-+* 04/28/03 Mannering Added skip phase op flag to CO profile data structure
-+* 05/05/03 Mannering Review Comments - Removed "#if CO_PROFILE" from around structure
-+* definitions and define the number of profiles (DEV_HOST_LIST_ENTRIES)
-+* 05/13/03 J. Bergsagel Added new elements to DEV_HOST_phyPerf_t for host control of hybrid.
-+* 05/15/03 J. Bergsagel Added "farEndLosErrors" and "farEndRdiErrors" to DEV_HOST_modemStatsDef_t.
-+* 05/16/03 Mannering Updated CO profile structure to support updated bit allocation and
-+* interopability.
-+* 05/20/03 Sameer V Added DSP message to inicate DYING GASP.
-+* 05/22/03 J. Bergsagel Added a new struct typedef "DEV_HOST_hostInterruptSource_t".
-+* Added "atucGhsRevisionNum" to "DEV_HOST_dspWrNegoParaDef_t".
-+* Moved the following struct typedef's here to the public host interface:
-+* DEV_HOST_dspBitSwapDef_t
-+* DEV_HOST_atmDsBert_t
-+* 05/28/03 A. Redfern Changed pointer type and location for margin reporting.
-+* 05/28/03 Mannering Moved CO profile defines to dev_host_interface_pvt.h
-+* 05/28/03 J. Bergsagel Moved subStateIndex and STM BERT controls into new struct "DEV_HOST_modemEnvPublic_t"
-+* 05/29/03 J. Bergsagel Added elements to "DEV_HOST_modemEnvPublic_t" for host control of DSLSS LED's.
-+* 06/10/03 Umesh Iyer Modified trainMode check to be compliant with the new host i/f mods.
-+* 06/05/03 J. Bergsagel Added enum that will eventually replace the bitfield: DEV_HOST_diagAnlgOptionsVar_t.
-+* Added new element "currentHybridNumUsed" in the DEV_HOST_phyPerf_t typedef
-+* Added new host control flags for LPR signal detection on GPIO[0].
-+* 06/06/03 A. Redfern Removed fine gain scale from the CO profile and added max downstream power cutback.
-+* Changed "test1" in CO profile struct to "phyEcDelayAdjustment".
-+* 06/26/03 J. Bergsagel Added genericStructure typedef and two pointer elements of this type in the big table.
-+* 07/03/03 Jack Huang Renamed test2 to bSwapThresholdUpdate
-+* 07/07/03 Mallesh Changed phySigTxPowerCutback_f flag to a variable phySigTxGainReductionAt0kft which indicates the
-+* amount of gain reduction in linear scale.
-+* 07/15/03 Sameer V Changed DEV_HOST_diagAnlgOptionsVar_t to be an enum instead of a bit field. Host code
-+* does not support setting bit fields.
-+* 07/22/03 Jack Huang Added bitswap control flag in host i/f for API calls
-+* 08/06/03 Sameer V Added missingToneDs_p to the DEV_HOST_oamWrNegoParaDef_t to enable host to switch off
-+* DS tones on specified bins
-+* 08/21/03 Jack Huang Added pcbEnabled flag in the DEV_HOST_modemEnvPublic_t structure
-+* Added g.hs buffer definitions to DEV_HOST_dspOamSharedInterface_t
-+* Added DEV_HOST_consBufDef_t to the DEV_HOST_dspOamSharedInterface_t structure
-+* 08/26/03 J. Bergsagel Fixed name of "missingToneDs_p" to be "missingToneDsAddr" instead (since it is
-+* not really used as a pointer).
-+* 09/11/03 Mallesh Added a flag "usPilotInT1413ModeInMedley" to determine the need to send Upstream Pilot
-+* in medley in T1.413 mode.
-+* 09/12/03 J. Bergsagel Changed "test3" to "phyBitaFastPathExcessFineGainBump" in CO profile struct.
-+* Changed "test4" to "phyBitaSkipGapAdjustment" in CO profile struct.
-+* 09/23/03 J. Bergsagel Changed "T1413vendorRevisionNumber" to "vendorRevisionNumber" in DEV_HOST_msg_t.
-+* Added ADSL2 and ADSL2 diag. states to the modem state bit field.
-+* 10/01/03 J. Bergsagel Changed define of "MULTI_MODE" to be 255 to indicate that all possible bits
-+* in the 8-bit bit field are turned on for any current and future training modes.
-+* 10/09/03 M. Turkboylari Added DSP_TRAINING_MSGS and adsl2DeltMsgs_p, which is a pointer to a pointer,
-+* in order to pass the ADSL2 training and DELT messages to the host side. This is for ACT.
-+* 10/20/03 Mallesh Added a GHS state enumerator for cleardown
-+* 10/20/03 Xiaohui Li Add definition for READSL2_MODE and READSL2_DELT
-+* 11/07/03 J. Bergsagel Removed all code for when SWTC==1, which therefore allows removal of include of
-+* "env_def_defines.h". We shouldn't have any compile tokens used in this file.
-+* (the SWTC token is always off in any Ax7 code).
-+* 11/14/03 J. Bergsagel Also removed READSL2_ENABLE token (no more compile tokens to be used in this .h file).
-+* 12/12/03 Sameer/Ram Added DEV_HOST_EOCAOC_INTERRUPT_MASK to enable host to disable response code for AOC/EOC
-+* mailbox messages
-+* 12/09/03 Jack Huang Changed G.hs txbuf size from 60 to 64 to fit the max segment size
-+* 12/15/03 Mallesh Changed vendor ID type defenition from SINT16 to UINT16
-+* 12/23/03 Sameer V Added ability to turn off constellation display reporting to host using oamFeature bit field.
-+* 12/24/03 Sameer V Changed comment for Constellation Display Current Address to Host Write instead of DSP Write.
-+* 12/26/03 Sameer/Ram Added DEV_HOST_GHSMSG_INTERRUPT_MASK to enable host to disable response code for GHS Messages
-+* (C) Copyright Texas Instruments Inc. 2002. All rights reserved.
-+*******************************************************************************/
-+
-+#include "dev_host_verdef.h"
-+
-+// ---------------------------------------------------------------------------------
-+// Address of the pointer to the DEV_HOST_dspOamSharedInterface_s struct of pointers
-+// This is where it all starts.
-+// ---------------------------------------------------------------------------------
-+#define DEV_HOST_DSP_OAM_POINTER_LOCATION 0x80000000
-+
-+// The define "MAX_NUM_UPBINS" is used in "DEV_HOST_diagAnlgInputVar_t" below.
-+// This value can never be changed (for host intf. backwards compatibility)
-+#define MAX_NUM_UPBINS 64
-+
-+// -----------------------------------------------
-+// Begin common enumerations between DSP and host.
-+// -----------------------------------------------
-+
-+// These Host-to-DSP commands are organized into two groups:
-+// immediate state change commands and status affecting commands.
-+// Do not add or remove commands except at the bottom since the DSP assumes this sequence.
-+
-+enum
-+{
-+ HOST_ACTREQ, // Send R-ACKREQ and monitor for C-ACKx
-+ HOST_QUIET, // Sit quietly doing nothing for about 60 seconds, DEFAULT STATE; R_IDLE
-+ HOST_XMITBITSWAP, // Perform upstream bitswap - FOR INTERNAL USE ONLY
-+ HOST_RCVBITSWAP, // Perform downstream bitswap - FOR INTERNAL USE ONLY
-+ HOST_RTDLPKT, // Send a remote download packet - FOR INTERNAL USE ONLY
-+ HOST_CHANGELED, // Read the LED settings and change accordingly
-+ HOST_IDLE, // Sit quiet
-+ HOST_REVERBTEST, // Generate REVERB for manufacturing test
-+ HOST_CAGCTEST, // Set coarse receive gain for manufacturing test
-+ HOST_DGASP, // send Dying Gasp messages through EOC channel
-+ HOST_GHSREQ, // G.hs - FOR INTERNAL USE ONLY
-+ HOST_GHSMSG, // G.hs - FOR INTERNAL USE ONLY
-+ HOST_GHS_SENDGALF, // G.hs - FOR INTERNAL USE ONLY
-+ HOST_GHSEXIT, // G.hs - FOR INTERNAL USE ONLY
-+ HOST_GHSMSG1, // G.hs - FOR INTERNAL USE ONLY
-+ HOST_HYBRID, // Enable/Disable automatic hybrid switch
-+ HOST_RJ11SELECT, // RJ11 inner/outer pair select
-+ HOST_DIGITAL_MEM, // Digital Diags: run external memory tests
-+ HOST_TXREVERB, // AFE Diags: TX path Reverb
-+ HOST_TXMEDLEY, // AFE Diags: TX path Medley
-+ HOST_RXNOISEPOWER, // AFE Diags: RX noise power
-+ HOST_ECPOWER, // AFE Diags: RX eco power
-+ HOST_ALL_ADIAG, // AFE Diags: all major analog diagnostic modes. Host is responsible to initiate each diagnostic sessions
-+ HOST_USER_ADIAG, // AFE Diags: Host fills in analog diagnostic input data structure as specified and requests DSP to perform measurements as specified
-+ HOST_QUIT_ADIAG, // AFE Diags: Host requests DSP to quit current diagnostic session. This is used for stopping the transmit REVERB/MEDLEY
-+ HOST_NO_CMD, // All others - G.hs - FOR INTERNAL USE ONLY
-+ HOST_DSLSS_SHUTDOWN, // Host initiated DSLSS shutdown message
-+ HOST_SET_GENERIC, // Set generic CO profile
-+ HOST_UNDO_GENERIC, // Set profile previous to Generic
-+ HOST_GHS_CLEARDOWN // G.hs - FOR INTERNAL USE ONLY to start cleardown
-+};
-+
-+// These DSP-to-Host responses are organized into two groups:
-+// responses to commands and requests for OAM services.
-+
-+enum
-+{
-+ DSP_IDLE, // R_IDLE state entered
-+ DSP_ACTMON, // R_ACTMON state entered
-+ DSP_TRAIN, // R_TRAIN state entered
-+ DSP_ACTIVE, // R_ACTIVE state entered
-+ DSP_XMITBITSWAP, // Upstream bitswap complete - FOR INTERNAL USE ONLY
-+ DSP_RCVBITSWAP, // Downstream bitswap complete - FOR INTERNAL USE ONLY
-+ DSP_RTDL, // R_RTDL state entered - FOR INTERNAL USE ONLY
-+ DSP_RRTDLPKT, // RTDL packet received - FOR INTERNAL USE ONLY
-+ DSP_XRTDLPKT, // RTDL packet transmitted - FOR INTERNAL USE ONLY
-+ DSP_ERROR, // Command rejected, wrong state for this command
-+ DSP_REVERBTEST, // Manufacturing REVERB test mode entered
-+ DSP_CAGCTEST, // Manufacturing receive gain test done
-+ DSP_OVERLAY_START, // Notify host that page overlay has started - overlay number indicated by "tag"
-+ DSP_OVERLAY_END, // Notify host that page overlay has ended - overlay number indicated by "tag"
-+ DSP_CRATES1, // CRATES1 message is valid and should be copied to host memory now
-+ DSP_SNR, // SNR calculations are ready and should be copied to host memory now
-+ DSP_GHSMSG, // G.hs - FOR INTERNAL USE ONLY
-+ DSP_RCVBITSWAP_TIMEOUT, // Acknowledge Message was not received within ~500 msec (26 Superframes).
-+ DSP_ATM_TC_SYNC, // Indicates true TC sync on both the upstream and downstream. Phy layer ready for data xfer.
-+ DSP_ATM_NO_TC_SYNC, // Indicates loss of sync on phy layer on either US or DS.
-+ DSP_HYBRID, // DSP completed hybrid switch
-+ DSP_RJ11SELECT, // DSP completed RJ11 inner/outer pair select
-+ DSP_INVALID_CMD, // Manufacturing (Digital and AFE) diags: CMD received not recognized
-+ DSP_TEST_PASSED, // Manufacturing diags: test passed
-+ DSP_TEST_FAILED, // Manufacturing diags: test failed
-+ DSP_TXREVERB, // Manufacturing AFE diags: Response to HOST_TXREVERB
-+ DSP_TXMEDLEY, // Manufacturing AFE diags: Response to HOST_TXMEDLEY
-+ DSP_RXNOISEPOWER, // Manufacturing AFE diags: Response to HOST_RXNOISEPOWER
-+ DSP_ECPOWER, // Manufacturing AFE diags: Response to HOST_ECPOWER
-+ DSP_ALL_ADIAG, // Manufacturing AFE diags: Response to HOST_ALL_ADIAG
-+ DSP_USER_ADIAG, // Manufacturing AFE diags: Response to HOST_USER_ADIAG
-+ DSP_QUIT_ADIAG, // Manufacturing AFE diags: Response to HOST_QUIT_ADIAG
-+ DSP_DGASP, // DSP Message to indicate dying gasp
-+ DSP_EOC, // DSP Message to indicate that DSP sent an EOC message to CO
-+ DSP_TRAINING_MSGS // DSP Message to indicate that host has to copy the training message specified in the tag field.
-+};
-+
-+// Define different ADSL training modes.
-+//Defintions as per new host interface.
-+#define NO_MODE 0
-+#define GDMT_MODE 2
-+#define GLITE_MODE 4
-+#define ADSL2_MODE 8
-+#define ADSL2_DELT (ADSL2_MODE+1)
-+#define ADSL2PLUS_MODE 16
-+#define ADSL2PLUS_DELT (ADSL2PLUS_MODE+1)
-+#define READSL2_MODE 32
-+#define READSL2_DELT (READSL2_MODE+1)
-+#define T1413_MODE 128
-+#define MULTI_MODE 255 // all possible bits are set in the bit field
-+
-+// Define the reason for dropping the connection
-+
-+enum
-+{
-+ REASON_LOS = 0x01,
-+ REASON_DYING_GASP = 0x02,
-+ REASON_USCRCERR = 0x04,
-+ REASON_MARGIN_DROP = 0x08
-+};
-+
-+
-+// ----------------------------------------------------
-+// Begin modem state bit field definitions - DSP write.
-+// ----------------------------------------------------
-+
-+// BitField1 for initial states and G.hs states.
-+// If more values need to be added, they will be added at the end (up to 32 total entries). However, if this causes
-+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
-+// that causes the proper values to be entered into the modem state bit fields.
-+typedef enum
-+{
-+ ZERO_STATE1 = 0,
-+ RTEST = 0x1,
-+ RIDLE = 0x2,
-+ RINIT = 0x4,
-+ RRESET = 0x8,
-+ GNSFLR = 0x10,
-+ GTONE = 0x20,
-+ GSILENT = 0x40,
-+ GNEGO = 0x80,
-+ GFAIL = 0x100,
-+ GACKX = 0x200,
-+ GQUIET2 = 0x400
-+} DEV_HOST_stateBitField1_t; // this enum should only have 32 bit entries in it. Add another enum if you need more.
-+
-+// BitField2 for T1.413 states and for the rest of the modem states (so far)
-+// If more values need to be added, they will be added at the end (up to 32 total entries). However, if this causes
-+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
-+// that causes the proper values to be entered into the modem state bit fields.
-+typedef enum
-+{
-+ ZERO_STATE2 = 0,
-+ TNSFLR = 0x1,
-+ TACTREQ = 0x2,
-+ TACTMON = 0x4,
-+ TFAIL = 0x8,
-+ TACKX = 0x10,
-+ TQUIET2 = 0x20,
-+ RQUIET2 = 0x40,
-+ RREVERB1 = 0x80,
-+ RQUIET3 = 0x100,
-+ RECT = 0x200,
-+ RREVERB2 = 0x400,
-+ RSEGUE1 = 0x800,
-+ RREVERB3 = 0x1000,
-+ RSEGUE2 = 0x2000,
-+ RRATES1 = 0x4000,
-+ RMSGS1 = 0x8000,
-+ RMEDLEY = 0x10000,
-+ RREVERB4 = 0x20000,
-+ RSEGUE3 = 0x40000,
-+ RMSGSRA = 0x80000,
-+ RRATESRA = 0x100000,
-+ RREVERBRA = 0x200000,
-+ RSEGUERA = 0x400000,
-+ RMSGS2 = 0x800000,
-+ RRATES2 = 0x1000000,
-+ RREVERB5 = 0x2000000,
-+ RSEGUE4 = 0x4000000,
-+ RBNG = 0x8000000,
-+ RREVERB6 = 0x10000000,
-+ RSHOWTIME = 0x20000000
-+} DEV_HOST_stateBitField2_t; // this enum should only have 32 bit entries in it. Add another enum if you need more.
-+
-+// BitField3 for ADSL2 states
-+// If more values need to be added, they will be added at the end (up to 32 total entries). However, if this causes
-+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
-+// that causes the proper values to be entered into the modem state bit fields.
-+typedef enum
-+{
-+ ZERO_STATE3 = 0,
-+ G2QUIET1 = 0x1,
-+ G2COMB1 = 0x2,
-+ G2QUIET2 = 0x4,
-+ G2COMB2 = 0x8,
-+ G2ICOMB1 = 0x10,
-+ G2LINEPROBE = 0x20,
-+ G2QUIET3 = 0x40,
-+ G2COMB3 = 0x80,
-+ G2ICOMB2 = 0x100,
-+ G2RMSGFMT = 0x200,
-+ G2RMSGPCB = 0x400,
-+ G2REVERB1 = 0x800,
-+ G2QUIET4 = 0x1000,
-+ G2REVERB2 = 0x2000,
-+ G2QUIET5 = 0x4000,
-+ G2REVERB3 = 0x8000,
-+ G2ECT = 0x10000,
-+ G2REVERB4 = 0x20000,
-+ G2SEGUE1 = 0x40000,
-+ G2REVERB5 = 0x80000,
-+ G2SEGUE2 = 0x100000,
-+ G2RMSG1 = 0x200000,
-+ G2MEDLEY = 0x400000,
-+ G2EXCHANGE = 0x800000,
-+ G2RMSG2 = 0x1000000,
-+ G2REVERB6 = 0x2000000,
-+ G2SEGUE3 = 0x4000000,
-+ G2RPARAMS = 0x8000000,
-+ G2REVERB7 = 0x10000000,
-+ G2SEGUE4 = 0x20000000
-+} DEV_HOST_stateBitField3_t; // this enum should only have 32 bit entries in it. Add another enum if you need more.
-+
-+// BitField4 for ADSL2 diag. states
-+// If more values need to be added, they will be added at the end (up to 32 total entries). However, if this causes
-+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written
-+// that causes the proper values to be entered into the modem state bit fields.
-+typedef enum
-+{
-+ ZERO_STATE4 = 0,
-+ GDSEGUE1 = 0x1,
-+ GDREVERB5 = 0x2,
-+ GDSEGUE2 = 0x4,
-+ GDEXCHANGE = 0x8,
-+ GDSEGUELD = 0x10,
-+ GDRMSGLD = 0x20,
-+ GDQUIET1LD = 0x40,
-+ GDQUIET2LD = 0x80,
-+ GDRACK1 = 0x100,
-+ GDRNACK1 = 0x200,
-+ GDQUIETLAST = 0x400
-+} DEV_HOST_stateBitField4_t; // this enum should only have 32 bit entries in it. Add another enum if you need more.
-+
-+// This struct collects all of the bitfield types listed above for the modem state bit field(s)
-+typedef struct
-+{
-+ DEV_HOST_stateBitField1_t bitField1; // this is the first modem state bit field (mostly init. and G.hs)
-+ DEV_HOST_stateBitField2_t bitField2; // this is the second modem state bit field (T1.413 and G.dmt)
-+ DEV_HOST_stateBitField3_t bitField3; // this is the third modem state bit field (ADSL2)
-+ DEV_HOST_stateBitField4_t bitField4; // this is the fourth modem state bit field (ADSL2 diag.)
-+} DEV_HOST_modemStateBitField_t;
-+
-+
-+// -----------------------------------------------
-+// Begin NegoPara message definitions - DSP write.
-+// -----------------------------------------------
-+
-+typedef struct
-+{
-+ UINT8 trainMode; // Train mode selected. See training modes defined above.
-+ UINT8 bDummy1; // dummy byte for explicit 32-bit alignment
-+ UINT16 lineLength; // Contains loop length estimate. Accuracy w/i 500 ft. LSbit = 1 for straight loop, = 0 for bridge tap
-+ UINT32 atucVendorId; // Pass the vendor id of the CO to the host
-+ UINT8 cMsgs1[8]; // CMsgs1 and CMSGPCB
-+ UINT16 adsl2DSRate; //
-+ UINT8 cRates2; //
-+ UINT8 rRates2; //
-+ UINT8 rRates1[4][11]; //
-+ UINT8 cMsgs2[4]; //
-+ UINT8 cRates1[4][30]; //
-+ UINT8 rMsgs2[4]; //
-+ UINT16 adsl2USRate; //
-+ UINT8 atucGhsRevisionNum; // Pass the G.hs Revision number of the CO to the host
-+ UINT8 reserved1; //
-+ PUINT8 *adsl2DeltMsgs_p; // This pointer to a pointer passes the address of the globalvar.pString, which is also
-+ // a pointer list of pointers. It will be used to pass all the new ADSL2 DELT messages to
-+ // host side. This is for ACT.
-+} DEV_HOST_dspWrNegoParaDef_t;
-+
-+
-+// ----------------------------------------------------
-+// Begin OAM NegoPara message definitions - Host write.
-+// ----------------------------------------------------
-+
-+// OAM Feature bit fields.
-+//
-+// Bit 0 - Enable auto retrain of modem
-+// Bit 1 - Detect and report TC sync to host
-+// Bit 2-31 - Reserved
-+
-+#define DEV_HOST_AUTORETRAIN_ON 0x00000001
-+#define DEV_HOST_TC_SYNC_DETECT_ON 0x00000002
-+
-+#define DEV_HOST_AUTORETRAIN_MASK 0x00000001
-+#define DEV_HOST_TC_SYNC_DETECT_MASK 0x00000002
-+#define DEV_HOST_EOCAOC_INTERRUPT_MASK 0x00000004
-+#define DEV_HOST_CONS_DISP_DISABLE_MASK 0x00000008
-+#define DEV_HOST_GHSMSG_INTERRUPT_MASK 0x00000010
-+
-+typedef struct
-+{
-+ UINT8 stdMode; // Desired train mode. See training modes defined above.
-+ UINT8 ghsSequence; // Selected G.hs session as shown in Appendix 1
-+ UINT8 usPilotFlag; // Value of 1 indicates transmit an upstream pilot on bin 16
-+ UINT8 bDummy1; // dummy byte for 32-bit alignment
-+ UINT8 rMsgs1[38]; // RMSG-1(6) and RMSG_PCB (38)
-+ UINT8 bDummy2[2]; // dummy bytes for 32-bit alignment
-+ UINT32 oamFeature; // 32 bit wide bit field to set OAM-specific features.
-+ SINT8 marginThreshold; // Threshold for margin reporting
-+ UINT8 hostFixAgc; // flag to force datapump to bypass AGC training and use the following values
-+ UINT8 hostFixEqualizer; // forced analog equalizer value used during AGC training when hostfix_agc is on
-+ UINT8 hostFixPga1; // forced pga1 value used during AGC training when hostFixAgc is on
-+ UINT8 hostFixPga2; // forced pga2 value used during AGC training when hostFixAgc is on
-+ UINT8 hostFixPga3; // forced pga3 value used during AGC training when hostFixAgc is on
-+ UINT8 marginMonitorShwtme; // margin monitoring flag (during showtime)
-+ UINT8 marginMonitorTrning; // margin monitoring flag (during training)
-+ UINT8 disableLosAlarm; // flag to disable training based on los
-+ UINT8 usCrcRetrain; // flag to disable retrain due to excessive USCRC
-+ UINT8 t1413VendorId[2]; // Vendor ID used for T1.413 trainings
-+ UINT8 gdmtVendorId[8]; // Vendor ID used for G.dmt trainings (ITU VendorID)
-+ UINT8 missingTones[64]; // 64 element array to define missing tones for TX_MEDLEY and TX REVERB tests
-+ UINT32 missingToneDsAddr; // Address given to DSP for tones to be switched off in DS direction
-+ UINT8 dsToneTurnoff_f; // This flag controls the DS tone turn off logic
-+ UINT8 reserved1; // Dummy bytes
-+ UINT8 reserved2; // Dummy bytes
-+ UINT8 reserved3; // Dummy bytes
-+} DEV_HOST_oamWrNegoParaDef_t;
-+
-+
-+// ----------------------------------------
-+// Begin Rate-adaptive message definitions.
-+// ----------------------------------------
-+
-+// The four values below can never be changed (for host intf. backwards compatibility)
-+#define DEV_HOST_RMSGSRA_LENGTH 10
-+#define DEV_HOST_RRATESRA_LENGTH 1
-+#define DEV_HOST_CRATESRA_LENGTH 120
-+#define DEV_HOST_CMSGSRA_LENGTH 6
-+
-+typedef struct
-+{
-+ UINT8 rRatesRaString[DEV_HOST_RRATESRA_LENGTH+3];
-+ UINT8 rMsgsRaString[DEV_HOST_RMSGSRA_LENGTH+2];
-+ UINT8 cMsgsRaString[DEV_HOST_CMSGSRA_LENGTH+2];
-+} DEV_HOST_raMsgsDef_t;
-+
-+
-+// ----------------------------------------------
-+// Begin superframe cnts definitions - DSP write.
-+// ----------------------------------------------
-+
-+#define DEV_HOST_FRAMES_PER_SUPER 68
-+#define DEV_HOST_SUPERFRAMECNTDSTRM 0
-+#define DEV_HOST_SUPERFRAMECNTUSTRM 4
-+
-+// Although only the least significant 8 bits should be used as an
-+// unsigned char for computing the bitswap superframe number, a
-+// full 32 bit counter is provided here in order to have an
-+// accurate indicator of the length of time that the modem has
-+// been connected. This counter will overflow after 2.35 years
-+// of connect time.
-+
-+typedef struct
-+{
-+ UINT32 wSuperFrameCntDstrm;
-+ UINT32 wSuperFrameCntUstrm;
-+} DEV_HOST_dspWrSuperFrameCntDef_t;
-+
-+
-+// --------------------------------
-+// Begin ATUR/ATUC msg definitions.
-+// --------------------------------
-+
-+// Grouping used by the DSP to simplify parameter passing.
-+// All of these are written by the DSP.
-+
-+typedef struct
-+{
-+ UINT16 vendorId; // TI's vendor ID = 0x0004; Amati's vendor ID = 0x0006
-+ UINT8 versionNum; // T1.413 issue number
-+ UINT8 rateAdapt; // 0 = fix rate (Default); 1= adaptive rate
-+ UINT8 trellis; // 0 = disable trellis(default); 1 = enable trellis
-+ UINT8 echoCancelling; // 0 = disable echo cancelling; 1 = enable echo cancelling(default)
-+ UINT8 maxBits; // value range: 0-15; default = 15
-+ UINT8 maxPsd; //
-+ UINT8 actualPsd; //
-+ UINT8 maxIntlvDepth; // 0, 1, 2, or 3 for 64, 128, 256, or 512 max depth
-+ UINT8 framingMode; // 0 for asynchronous, 1 for synchronous full overhead
-+ // 2 for reduced overhead, 3 for merged reduced overhead DSP write.
-+ UINT8 maxFrameMode; // maximum framing mode desired. Nor 0 or 3.
-+ SINT16 targetMargin; //
-+ SINT16 maxAllowedMargin; //
-+ SINT16 minRequiredMargin; //
-+ SINT16 maxTotBits; //
-+ UINT8 grossGain; //
-+ UINT8 ntr; // Enable/disable NTR support
-+ SINT16 loopAttn; // Loop Attenuation
-+ UINT8 vendorRevisionNumber; // Reported Vendor Revision Number
-+ UINT8 reserved1; // for 32-bit alignment
-+ UINT8 reserved2; // for 32-bit alignment
-+ UINT8 reserved3; // for 32-bit alignment
-+} DEV_HOST_msg_t;
-+
-+
-+// --------------------------------------
-+// Begin bits and gains table definitions
-+// --------------------------------------
-+
-+typedef struct
-+{
-+ PUINT8 aturBng_p; // pointer to ATU-R bits and gains table
-+ PUINT8 atucBng_p; // pointer to ATU-C bits and gains table
-+ PUINT8 bitAllocTblDstrm_p; // pointer to Downstream Bit Allocation table
-+ PUINT8 bitAllocTblUstrm_p; // pointer to Upstream Bit Allocation table
-+ PSINT8 marginTblDstrm_p; // pointer to Downstream Margin table
-+} DEV_HOST_dspWrSharedTables_t;
-+
-+
-+// ----------------------------------------
-+// Begin datapump code overlay definitions.
-+// ----------------------------------------
-+
-+#define DEV_HOST_PAGE_NUM 4 // number of overlay pages
-+
-+// Never access a struct of this typedef directly. Always go through the DEV_HOST_olayDpDef_t struct
-+typedef struct
-+{
-+ UINT32 overlayHostAddr; // source address in host memory
-+ UINT32 overlayXferCount; // number of 32bit words to be transfered
-+ UINT32 overlayDspAddr; // destination address in DSP's PMEM
-+} DEV_HOST_olayDpPageDef_t;
-+
-+
-+typedef struct
-+{
-+ UINT32 overlayStatus; // Status of current overlay to DSP PMEM
-+ UINT32 overlayNumber; // DSP PMEM overlay page number
-+ UINT32 overlayState; // Indicates whether current state is an overlay state
-+ DEV_HOST_olayDpPageDef_t *olayDpPage_p[DEV_HOST_PAGE_NUM]; // Def's for the Pages
-+} DEV_HOST_olayDpDef_t;
-+
-+
-+// -------------------------
-+// Begin ATM-TC definitions.
-+// -------------------------
-+
-+// TC cell states.
-+typedef enum
-+{
-+ TC_HUNT,
-+ TC_PRESYNC,
-+ TC_SYNC
-+} DEV_HOST_cellDelinState_t;
-+
-+
-+// --------------------------------------------
-+// Begin datapump error/statistics definitions.
-+// --------------------------------------------
-+
-+// Never access a struct of this typedef directly. Always go through the DEV_HOST_modemStatsDef_t struct.
-+typedef struct
-+{
-+ UINT32 crcErrors; // Num of CRC errored ADSL frames
-+ UINT32 fecErrors; // Num of FEC errored (corrected) ADSL frames
-+ UINT32 ocdErrors; // Out of Cell Delineation
-+ UINT32 ncdError; // No Cell Delineation
-+ UINT32 lcdErrors; // Loss of Cell Delineation (within the same connection)
-+ UINT32 hecErrors; // Num of HEC errored ADSL frames
-+} DEV_HOST_errorStats_t;
-+
-+
-+typedef struct
-+{
-+ DEV_HOST_errorStats_t *usErrorStatsIntlv_p; // us error stats - interleave path
-+ DEV_HOST_errorStats_t *dsErrorStatsIntlv_p; // ds error stats - interleave path
-+ DEV_HOST_errorStats_t *usErrorStatsFast_p; // us error stats - fast path
-+ DEV_HOST_errorStats_t *dsErrorStatsFast_p; // ds error stats - fast path
-+ UINT32 losErrors; // Num of ADSL frames where loss-of-signal
-+ UINT32 sefErrors; // Num of severly errored ADSL frames - LOS > MAXBADSYNC ADSL frames
-+ UINT32 farEndLosErrors; // Number of reported LOS defects by the CO.
-+ UINT32 farEndRdiErrors; // Number of reported RDI defects by the CO.
-+} DEV_HOST_modemStatsDef_t;
-+
-+// Never access a struct of this typedef directly. Always go through the DEV_HOST_atmStats_t struct.
-+typedef struct
-+{
-+ UINT32 goodCount; // Upstream Good Cell Count
-+ UINT32 idleCount; // Upstream Idle Cell Count
-+} DEV_HOST_usAtmStats_t;
-+
-+// Never access a struct of this typedef directly. Always go through the DEV_HOST_atmStats_t struct.
-+typedef struct
-+{
-+ UINT32 goodCount; // Downstream Good Cell Count
-+ UINT32 idleCount; // Downstream Idle Cell Count
-+ UINT32 badHecCount; // Downstream Bad Hec Cell Count
-+ UINT32 ovflwDropCount; // Downstream Overflow Dropped Cell Count
-+ DEV_HOST_cellDelinState_t delineationState; // Indicates current delineation state
-+} DEV_HOST_dsAtmStats_t;
-+
-+
-+typedef struct
-+{
-+ DEV_HOST_usAtmStats_t *us0_p; // US ATM stats for TC channel 0
-+ DEV_HOST_dsAtmStats_t *ds0_p; // DS ATM stats for TC channel 0
-+ DEV_HOST_usAtmStats_t *us1_p; // US ATM stats for TC channel 1
-+ DEV_HOST_dsAtmStats_t *ds1_p; // DS ATM stats for TC channel 1
-+} DEV_HOST_atmStats_t;
-+
-+
-+// ----------------------
-+// Begin EOC definitions.
-+// ----------------------
-+
-+// The two values below can never change (for backwards compatibility of host intf.)
-+#define DEV_HOST_EOCREG4LENGTH 32
-+#define DEV_HOST_EOCREG5LENGTH 32
-+
-+typedef struct
-+{
-+ UINT8 eocReg4[DEV_HOST_EOCREG4LENGTH]; // Host/Dsp Write, vendor specific EOC Register 4
-+ UINT8 eocReg5[DEV_HOST_EOCREG5LENGTH]; // Host/Dsp Write, vendor specific EOC Register 5
-+ UINT8 vendorId[8]; // Host write
-+ UINT8 revNumber[4]; // Host, ATU-R Revision Number
-+ UINT8 serialNumber[32]; // Host write
-+ UINT8 eocReg4Length; // Host Write, valid length for EOC register 4
-+ UINT8 eocReg5Length; // Host Write, valid length for EOC register 5
-+ UINT8 dummy[2]; // dummy bytes for 32-bit alignment
-+ UINT32 eocModemStatusReg; // Dsp Write, status bits to host
-+ UINT8 lineAtten; // Dsp Write, line attenuation in 0.5 db step
-+ SINT8 dsMargin; // DSP Write, measured DS margin
-+ UINT8 aturConfig[30]; // Dsp Write, also used by EOC for ATUR Configuration
-+} DEV_HOST_eocVarDef_t;
-+
-+typedef struct
-+{
-+ UINT16 endEocThresh; // Host Write, end of Clear EOC stream threshold
-+ UINT16 dummy; // dummy value to fill gap
-+ UINT32 dropEocCount; // Dsp Write, counter of dropped Clear EOC bytes
-+ UINT16 eocRxLength; // Host/DSP write, number of valid Rx Clear EOC bytes
-+ UINT16 eocTxLength; // Host/DSP write, number of valid Tx Clear EOC bytes
-+ UINT8 eocRxBuf[64]; // Dsp Write, Buffer for receiving Rx Clear EOC bytes
-+ UINT8 eocTxBuf[64]; // Host Write, Buffer for writing Tx Clear EOC bytes
-+} DEV_HOST_clearEocVarDef_t;
-+
-+
-+// -----------------------------------
-+// Begin CO profile Definitions.
-+// -----------------------------------
-+
-+/* struct size must be a word size */
-+typedef struct
-+{
-+
-+ SINT16 devCodecRxdf4Coeff[12] ; // (BOTH) IIR Coefficients
-+ SINT16 devCodecTxdf2aCoeff[64] ; // (BOTH) FIR filter coefficients
-+ SINT16 devCodecTxdf2bCoeff[64] ; // (BOTH) FIR filter coefficients
-+ SINT16 devCodecTxdf1Coeff[12] ; // (BOTH) IIR filter coefficients
-+ UINT16 devCodecTxDf2aDen; // (BOTH) denominator for IIR filter
-+ UINT16 devCodecTxDf2bDen; // (BOTH) denominator for IIR filter
-+ SINT16 ctrlMsmSpecGain[32]; // (BOTH)
-+
-+ SINT16 phyBitaRateNegIntNoTrellis ; // (BOTH) value to set
-+ SINT16 phyBitaRateNegIntTrellis ; // (BOTH) value to set
-+ SINT16 phyBitaRateNegFastNoTrellis ; // (BOTH) value to set
-+ SINT16 phyBitaRateNegFastTrellis ; // (BOTH) value to set
-+ SINT16 phyBitaRsFlag ; // (BOTH)
-+ SINT16 phyBitaFirstSubChannel ; // (BOTH)
-+ SINT16 phyBitaMaxFineGainBump; // max fine gain bump
-+ SINT16 phyBitaFineGainReduction; // fine gain reduction
-+ SINT16 phyBitaMaxDownstreamPowerCutback; // max downstream power cutback
-+
-+ SINT16 phySigTxGainReductionAt0kft; // upstream power reduction at 0 kft.
-+
-+ SINT16 phyAgcPgaTarget ; // (BOTH) compare value
-+
-+ UINT16 imsg413TxRate ; // (BOTH) Tx rate
-+ SINT16 imsg413RsBytesAdjust ; // (BOTH) subtract value
-+ UINT16 imsg413PstringMask ; // (POTS) Or'ed into pString[RMSGS1_INDEX][1]
-+ SINT16 imsg413UsPilot ; // (BOTH)??
-+ UINT16 imsg413SkipPhaseOp ; // (POTS)
-+
-+ UINT16 ctrlMsmSensitivity1 ; // (BOTH) value to set
-+ UINT16 ctrlMsmTxPsdShape_f; // (BOTH) upstream spectral shaping flag
-+
-+ UINT16 ovhdAocUsBswapReq_f ; // (BOTH)value to set
-+ UINT16 ovhdAocScanMse_f ; // (BOTH)value to set
-+
-+ SINT16 phyRevFullFirstBin ; //
-+ SINT16 phyRevFullLastBin ; //
-+ SINT16 phyRevFirstBin ; //
-+ SINT16 phyRevLastBin ; //
-+ SINT16 phyMedFirstBin ; //
-+ SINT16 phyMedLastBin ; //
-+ SINT16 phyMedOptionalLastBin; // Medley last bin - optional
-+
-+ SINT16 phyEcDelayAdjustment; // Echo delay adjustment
-+ SINT16 bSwapThresholdUpdate; // bSwapThresholdUpdate
-+ SINT16 phyBitaFastPathExcessFineGainBump; // Used in phy_bita.c
-+ SINT16 phyBitaSkipGapAdjustment; // Used in phy_bita.c
-+ SINT16 usPilotInT1413ModeInMedley; // To send Upstream Pilot in medley in T1.413 mode.
-+
-+ UINT32 profileVendorId ; // vendor id
-+
-+} DEV_HOST_coData_t ;
-+
-+typedef struct
-+{
-+ DEV_HOST_coData_t * hostProfileBase_p; // base address of profile list
-+} DEV_HOST_profileBase_t ;
-+
-+
-+
-+// -----------------------------------
-+// Begin DSP/Host Mailbox Definitions.
-+// -----------------------------------
-+
-+// The 3 values below can never be decreased, only increased.
-+// If you increase one of the values, you must add more to the
-+// initializers in "dev_host_interface.c".
-+#define DEV_HOST_HOSTQUEUE_LENGTH 8
-+#define DEV_HOST_DSPQUEUE_LENGTH 8
-+#define DEV_HOST_TEXTQUEUE_LENGTH 8
-+
-+// Never access a struct of this typedef directly. Always go through the DEV_HOST_mailboxControl_t struct.
-+typedef struct
-+{
-+ UINT8 cmd;
-+ UINT8 tag;
-+ UINT8 param1;
-+ UINT8 param2;
-+} DEV_HOST_dspHostMsg_t;
-+
-+// Never access a struct of this typedef directly. Always go through the DEV_HOST_mailboxControl_t struct.
-+typedef struct
-+{
-+ UINT32 msgPart1;
-+ UINT32 msgPart2;
-+} DEV_HOST_textMsg_t;
-+
-+// The structure below has been ordered so that the Host need only write to
-+// even byte locations to update the indices.
-+
-+// The Buffer pointers in the struct below each point to a different
-+// struct array that has an array size of one of the matching Queue Length
-+// values defined above (DEV_HOST_HOSTQUEUE_LENGTH, DEV_HOST_DSPQUEUE_LENGTH,
-+// and DEV_HOST_TEXTQUEUE_LENGTH).
-+
-+typedef struct
-+{
-+ UINT8 hostInInx; // Host write, DSP must never write except for init
-+ UINT8 bDummy0[3]; // dummy bytes for explicit 32-bit alignment
-+ UINT8 hostOutInx; // DSP write, Host must never write
-+ UINT8 bDummy1[3]; // dummy bytes for explicit 32-bit alignment
-+ UINT8 dspOutInx; // Host write, DSP must never write except for init
-+ UINT8 bDummy2[3]; // dummy bytes for explicit 32-bit alignment
-+ UINT8 dspInInx; // DSP write, Host must never write
-+ UINT8 bDummy3[3]; // dummy bytes for explicit 32-bit alignment
-+ UINT8 textInInx; // DSP write, Host must never write
-+ UINT8 bDummy4[3]; // dummy bytes for explicit 32-bit alignment
-+ UINT8 textOutInx; // Host write, DSP must never write except for init
-+ UINT8 bDummy5[3]; // dummy bytes for explicit 32-bit alignment
-+ DEV_HOST_dspHostMsg_t *hostMsgBuf_p; // pointer to Host Mailbox Buffer (Host writes the buffer)
-+ DEV_HOST_dspHostMsg_t *dspMsgBuf_p; // pointer to DSP Mailbox Buffer (DSP writes the buffer)
-+ DEV_HOST_textMsg_t *textMsgBuf_p; // pointer to Text Mailbox Buffer (DSP writes the buffer)
-+} DEV_HOST_mailboxControl_t;
-+
-+
-+//-----------------------------------------
-+// Physical layer performance parameter
-+//-----------------------------------------
-+typedef struct
-+{
-+ SINT32 hybridCost[5]; // Cost functions for hybrids (0: none, 1-4 hybrid options)
-+ SINT32 usAvgGain; // upstream average gain in 20log10 (Q8)
-+ SINT32 dsAvgGain; // downstream average gain in 20log10 (Q8)
-+ UINT8 disableDspHybridSelect_f; // Allows host to disable the automatic hybrid selection by the DSP
-+ UINT8 hostSelectHybridNum; // DSP will use this hybrid number only if DSP Select is disabled (values: 1-4)
-+ UINT8 currentHybridNumUsed; // DSP indicates to the host the current hybrid number in use
-+ UINT8 reserved1; // reserved for future use
-+} DEV_HOST_phyPerf_t;
-+
-+
-+/***********************************************************
-+ * The 3 structures below are used only for analog
-+ * diagnostic functions originally defined in diag.h
-+ * Moved here by Carlos A. Perez under J. Bergsagel request
-+ ***********************************************************/
-+
-+/****************************************************************************/
-+/* Options for the Analog Diagnostic user input data structure */
-+/* (MUST be word aligned) */
-+/****************************************************************************/
-+typedef enum
-+{
-+ ZERO_DIAG_OPT = 0, // dummy value for zero place-holder
-+ NOISE_ONLY = 0x1, // diagnostic in noise only mode (on=1, off=0), disregard diagMode 0-4
-+ EXTERNAL_CO = 0x2, // operates against external CO (external=1, internal=0)
-+ DIAG_AGC = 0x4, // agc selects gains control (agc=1, manual=0)
-+ CROSSTALK_TEQ = 0x8, // crosstalk selects teq (crosstalk=1, manual=0)
-+ LEAKY_TEQ = 0x10, // use leaky teq (on=1, off=0)
-+ AUX_AMPS = 0x20, // auxamps (on=1, off=0)
-+ BW_SELECT = 0x40, // change rxhpf/txlpf fc (modify=1, default=0)
-+ DIAG_HYB_SELECT = 0x80, // change hybrid (modify=1, default=0)
-+ POWER_DOWN_CDC = 0x100, // power down codec (power down=1, no power down=0)
-+ ISDN_OP_MODE = 0x200, // operation mode (pots=0, isdn=1)
-+ BYPASS_RXAF2 = 0x400, // Bypass except RXAF2 (on=1, off = 0)
-+ TX_TEST_CONT = 0x800, // Continuous tx test (on=1, off=0)
-+ TX_SCALE_MTT = 0x1000 // Scale tx signal for Mtt test (on=1, off=0)
-+} DEV_HOST_diagAnlgOptionsVar_t;
-+
-+/****************************************************************************/
-+/* Analog Diagnostic user input data structure (MUST be word align) */
-+/****************************************************************************/
-+
-+typedef struct
-+{
-+ DEV_HOST_diagAnlgOptionsVar_t diagOption; // Other diagnostic optional settings
-+
-+ UINT8 diagMode; // Performance diagnostic mode
-+ UINT8 txMode; // transmit mode
-+ UINT8 rxMode; // receive mode
-+ UINT8 teqSp; // Select teq starting pt
-+ UINT8 txDf1; // see dev_codec_filters.c and
-+ UINT8 txDf2a; // dev_codec.h for filter coefficients
-+ UINT8 txDf2b;
-+ UINT8 rxDf4;
-+
-+ UINT16 codingGain256Log2; // 256*Log2(coding gain)
-+ UINT16 noiseMargin256Log2; // 256*Log2(noise margin)
-+
-+ UINT16 rxPga1; // PGA1
-+ UINT16 rxPga2; // PGA2
-+ UINT16 rxPga3; // PGA3
-+ UINT16 anlgEq; // AEQ settings (dB/MHz)
-+
-+ SINT8 pilotBin; // Select pilot subchannel
-+ SINT8 txSwGain; // manual set for bridge tap loop
-+ SINT8 tdw1Len; // TDW1 length - 0,2,4,8,16
-+ SINT8 tdw2Len; // TDW2 length - 0,2,4,8,16
-+
-+ UINT8 teqEcMode; // TEQ/EC mode
-+ UINT8 hybrid;
-+ UINT8 txAttn; // Codec Tx attenuation
-+ UINT8 txGain; // Codec Tx gain (Sangam only)
-+
-+ SINT16 txPda; //Codec Tx Digital gain/attn
-+ UINT8 txTone[MAX_NUM_UPBINS]; // Turning tones on/off
-+ // Still govern by lastbin
-+ UINT16 rsvd; //for 32 bits alignment
-+}DEV_HOST_diagAnlgInputVar_t;
-+
-+/****************************************************************************/
-+/* Analog diagnostic output data structure */
-+/****************************************************************************/
-+typedef struct
-+{
-+ PSINT32 rxSnr_p[2]; // Pointer to estimated snr
-+ PSINT32 rxSubChannelCapacity_p[2]; // Pointer to estimated subchan capacity
-+ PSINT32 rxSignalPower_p[2]; // Pointer to estimated signal power
-+ PSINT32 rxNoisePower_p[2]; // Pointer to estimated noise power
-+ PSINT32 rxAvg_p; // Pointer to average of rcvd signal
-+ SINT32 chanCapacity[2] ; // Channel total capacity
-+ SINT32 dataRate[2]; // Modem data rate (SNR)
-+ SINT32 avgNoiseFloor; // Average noise floor
-+ SINT16 snrGap256Log2; // 256*Log2(snr gap)
-+ SINT16 rxPga1; // PGA1
-+ SINT16 rxPga2; // PGA2
-+ SINT16 rxPga3; // PGA3
-+ SINT16 anlgEq; // AEQ settings (dB/MHz)
-+ SINT16 rsvd;
-+}DEV_HOST_diagAnlgOutputVar_t;
-+
-+
-+// Bit field structure that allows the host to mask off interrupt sources for possible DSP-to-Host interrupts.
-+// Each bit represents a possible source of interrupts in the DSP code that might cause a DSP-to-Host
-+// interrupt to occur.
-+// This mask structure is not intended to show how interrupt sources in the DSP code correspond to the actual
-+// DSP-to-Host interrupts. There could be multiple ways to cause an interrupt in the DSP code, but they all
-+// eventually tie into one of the three possible DSP-to-Host interrupts.
-+// The host should write a "1" to an individual bit when it wants to mask possible interrupts from that source.
-+
-+// enum that represents individual bits in maskBitField1
-+typedef enum
-+{
-+ ZERO_MASK1 = 0, // dummy value for zero place-holder
-+ DSP_MSG_BUF = 0x1, // mask interrupts due to DSP-to-Host message mailbox updates
-+ STATE_BIT_FIELD = 0x2, // mask interrupts due to changes in the modem state bit fields
-+ DSP_HEARTBEAT = 0x4 // mask interrupts for the DSP hearbeat
-+} DEV_HOST_intMask1_t; // this enum should only have 32 values in it (maximum).
-+
-+// Add more "mask bit fields" at the end of this struct if you need more mask values
-+typedef struct
-+{
-+ DEV_HOST_intMask1_t maskBitField1;
-+} DEV_HOST_hostInterruptMask_t; // this struct should only have 32 bits in it.
-+
-+// Bit field structure that allows the host to determine the source(s) of DSP-to-Host interrupts in case
-+// several of the interrupt sources get combined onto a single DSP-to-Host interrupt.
-+// DSP will set each bit to a "1"as an interrupt occurs.
-+// Host has the reponsibility to clear each bit to a "0" after it has determined the source(s) of interrupts.
-+// Each source bit field in this struct will use the same enum typedef that matches the corresponding mask
-+// bit field in "DEV_HOST_hostInterruptMask_t"
-+typedef struct
-+{
-+ DEV_HOST_intMask1_t sourceBitField1;
-+} DEV_HOST_hostInterruptSource_t;
-+
-+
-+// --------------------------
-+// Begin bitswap definitions.
-+// --------------------------
-+
-+// bitSwapSCnt contains the superframe to perform bit swap
-+// The entries must be ordered so that the first group only contains bit change commands
-+// The other entries may contain power adjustment instructions and must be
-+// written with something. NOP (0) is an available instruction.
-+typedef struct
-+{
-+ PUINT8 fineGains_p; // pointer to bng string, needed to check fine gains for powerswap
-+ UINT8 bitSwapNewIndices[6]; // Bin before bitSwapBin to process
-+ UINT8 bitSwapCmd[6]; // Bitswap command for bitSwapBin
-+ UINT8 bitSwapBin[6]; // bin to modify
-+ UINT8 bitSwapSCnt; // Superframe count on which to perform bitswap
-+ UINT8 bitSwapEnabled; // bitSwapEnabled
-+} DEV_HOST_dspBitSwapDef_t;
-+
-+
-+// ---------------------------
-+// Begin ATM BERT definitions.
-+// ---------------------------
-+
-+// Structure used for ATM Idle Cells based bit error rate computation.
-+typedef struct
-+{
-+ UINT8 atmBertFlag; // Feature enable/disable flag (Host write)
-+ UINT8 dummy1;
-+ UINT8 dummy[2]; // Dummy bytes for 32-bit alignment
-+ UINT32 bitCountLow; // Low part of 64-bit BERT bit count (DSP write)
-+ UINT32 bitCountHigh; // High part of 64-bit BERT bit count (DSP write)
-+ UINT32 bitErrorCountLow; // Low part of 64-bit BERT bit count (DSP write)
-+ UINT32 bitErrorCountHigh;// High part of 64-bit BERT bit count (DSP write)
-+} DEV_HOST_atmDsBert_t;
-+
-+
-+// ------------------------------------
-+// Misc. modem environment definitions.
-+// ------------------------------------
-+
-+
-+typedef struct
-+{
-+ SINT16 subStateIndex; // Index that signifies datapump substate. (DSP write)
-+ UINT8 externalBert; // Turn on/off external BERT interface. 0 = OFF; 1 = ON. (Host write)
-+ UINT8 usBertPattern; // BERT pattern for US TX data. 0 = 2^15-1; 1 = 2^23-1. (Host write)
-+ UINT8 overrideDslLinkLed_f; // Overrides DSP operation of the DSL_LINK LED. (Host write)
-+ // 0 = DSP is in control; 1 = Host is in control.
-+ UINT8 dslLinkLedState_f; // DSL_LINK LED state when override flag has been set. (Host write)
-+ // DSL_LINK LED will be updated with this value once per frame.
-+ // LED is active-low: 0 = ON, 1 = OFF.
-+ UINT8 overrideDslActLed_f; // Overrides DSP operation of the DSL_ACT LED. (Host write)
-+ // 0 = DSP is in control; 1 = Host is in control.
-+ UINT8 dslActLedState_f; // DSL_ACT LED state when override flag has been set. (Host write)
-+ // DSL_ACT LED will be updated with this value once per frame.
-+ // LED is active-low: 0 = ON, 1 = OFF.
-+ UINT8 dGaspLprIndicator_f; // How LPR signal (GPIO[0]) is to be interpreted. (Host write)
-+ // 0 = LPR is active-low; 1 = LPR is active-high.
-+ UINT8 overrideDspLprGasp_f; // Overrides DSP detection of LPR signal to send out DGASP. (Host write)
-+ // 0 = DSP detects LPR; 1 = Host detects LPR and sends "HOST_DGASP" to DSP.
-+ UINT8 pcbEnabled; // DS power cut back
-+ UINT8 maxAvgFineGainCtrl_f; // If maxAvgFineGainCtrl_f == 0, then the datapump controls the maximum average fine gain value.
-+ // If maxAvgFineGainCtrl_f == 1, then the host controls the maximum average fine gain value.
-+ UINT32 reasonForDrop; // This field will tell the host what might be the reason for a dropped connection.
-+ SINT16 maxAverageFineGain; // When maxAvgFineGainCtrl_f == 1, the value in maxAverageFineGain is the maximum average fine gain level in 256log2 units.
-+ UINT8 reserved1; // These are for 32-bit alignment.
-+ UINT8 reserved2; // These are for 32-bit alignment.
-+} DEV_HOST_modemEnvPublic_t;
-+
-+
-+// -----------------------------
-+// Generic structure definition.
-+// -----------------------------
-+
-+typedef struct
-+{
-+ PSINT8 parameter1_p;
-+ PSINT16 parameter2_p;
-+ PSINT32 parameter3_p;
-+ PUINT8 parameter4_p;
-+ PUINT16 parameter5_p;
-+ PUINT32 parameter6_p;
-+} DEV_HOST_genericStructure_t;
-+
-+
-+// ------------------------------
-+// Begin G.hs buffer definitions.
-+// ------------------------------
-+
-+typedef struct
-+{
-+ UINT8 txBuf[64]; // G.hs xmt buffer
-+} DEV_HOST_ghsDspTxBufDef_t;
-+
-+
-+typedef struct
-+{
-+ UINT8 rxBuf[80]; // G.hs rcv buffer
-+} DEV_HOST_ghsDspRxBufDef_t;
-+
-+// -----------------------------------------
-+// Begin Constellation Display definitions.
-+// -----------------------------------------
-+
-+typedef struct
-+{
-+ UINT32 consDispStartAddr; // Host write
-+ UINT32 consDispCurrentAddr; // Host write
-+ UINT32 consDispBufLen; // Constellation Buffer Length
-+ UINT32 consDispBin; // Host write, DS band only
-+} DEV_HOST_consBufDef_t;
-+
-+typedef struct
-+{
-+ PSINT16 buffer1_p; //DSP write
-+ PSINT16 buffer2_p; //DSP write
-+} DEV_HOST_snrBuffer_t;
-+
-+// --------------------------------------------------------------------------------------
-+// Typedef to be used for the DEV_HOST_dspOamSharedInterface_s struct of pointers
-+// (this is used in dev_host_interface.c).
-+// NOTE: This struct of pointers is NEVER to be referenced anywhere else in the DSP code.
-+// IMPORTANT: Only pointers to other structs go into this struct !!
-+// --------------------------------------------------------------------------------------
-+typedef struct
-+{
-+ DEV_HOST_hostIntfcVersionDef_t *hostIntfcVersion_p;
-+ DEV_HOST_dspVersionDef_t *datapumpVersion_p;
-+ DEV_HOST_modemStateBitField_t *modemStateBitField_p;
-+ DEV_HOST_dspWrNegoParaDef_t *dspWriteNegoParams_p;
-+ DEV_HOST_oamWrNegoParaDef_t *oamWriteNegoParams_p;
-+ DEV_HOST_raMsgsDef_t *raMsgs_p;
-+ DEV_HOST_dspWrSuperFrameCntDef_t *dspWriteSuperFrameCnt_p;
-+ DEV_HOST_msg_t *atucMsg_p;
-+ DEV_HOST_msg_t *aturMsg_p;
-+ DEV_HOST_dspWrSharedTables_t *dspWrSharedTables_p;
-+ DEV_HOST_olayDpDef_t *olayDpParms_p;
-+ DEV_HOST_eocVarDef_t *eocVar_p;
-+ DEV_HOST_clearEocVarDef_t *clearEocVar_p;
-+ DEV_HOST_modemStatsDef_t *modemStats_p;
-+ DEV_HOST_atmStats_t *atmStats_p;
-+ DEV_HOST_mailboxControl_t *dspHostMailboxControl_p;
-+ DEV_HOST_phyPerf_t *phyPerf_p;
-+ DEV_HOST_diagAnlgInputVar_t *analogInputVar_p;
-+ DEV_HOST_diagAnlgOutputVar_t *analogOutputVar_p;
-+ DEV_HOST_hostInterruptMask_t *hostInterruptMask_p;
-+ DEV_HOST_profileBase_t *profileList_p;
-+ DEV_HOST_hostInterruptSource_t *hostInterruptSource_p;
-+ DEV_HOST_dspBitSwapDef_t *dspBitSwapDstrm_p;
-+ DEV_HOST_dspBitSwapDef_t *dspBitSwapUstrm_p;
-+ DEV_HOST_atmDsBert_t *atmDsBert_p;
-+ DEV_HOST_modemEnvPublic_t *modemEnvPublic_p;
-+ DEV_HOST_genericStructure_t *genericStructure1_p;
-+ DEV_HOST_genericStructure_t *genericStructure2_p;
-+ DEV_HOST_ghsDspTxBufDef_t *ghsDspTxBuf_p;
-+ DEV_HOST_ghsDspRxBufDef_t *ghsDspRxBuf_p;
-+ DEV_HOST_consBufDef_t *consDispVar_p;
-+ DEV_HOST_snrBuffer_t *snrBuffer_p;
-+} DEV_HOST_dspOamSharedInterface_t;
-+
-+
-+// ---------------------------------------------------------------------------------
-+// Typedef to be used for the pointer to the DEV_HOST_dspOamSharedInterface_s struct
-+// of pointers (this is used in dev_host_interface.c).
-+// ---------------------------------------------------------------------------------
-+typedef DEV_HOST_dspOamSharedInterface_t *DEV_HOST_dspOamSharedInterfacePtr_t;
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/dev_host_verdef.h linux.dev/drivers/atm/sangam_atm/dev_host_verdef.h
---- linux.old/drivers/atm/sangam_atm/dev_host_verdef.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dev_host_verdef.h 2005-08-23 04:46:50.091844608 +0200
-@@ -0,0 +1,102 @@
-+#ifndef __DEV_HOST_VERDEF_H__
-+#define __DEV_HOST_VERDEF_H__ 1
-+
-+//********************************************************************
-+//*
-+//* DMT-BASE ADSL MODEM PROGRAM
-+//* TEXAS INSTRUMENTS PROPRIETARTY INFORMATION
-+//* AMATI CONFIDENTIAL PROPRIETARY
-+//*
-+//* (c) Copyright April 1999, Texas Instruments Incorporated.
-+//* All Rights Reserved.
-+//*
-+//* Property of Texas Instruments Incorporated and Amati Communications Corp.
-+//*
-+//* Restricted Rights - Use, duplication, or disclosure is subject to
-+//* restrictions set forth in TI's and Amati program license agreement and
-+//* associated documentation
-+//*
-+//*********************************************************************
-+//*
-+//* FILENAME: dev_host_verdef.h
-+//*
-+//* ABSTRACT: This file defines the version structure
-+//*
-+//* TARGET: Non specific.
-+//*
-+//* TOOLSET: Non specific.
-+//*
-+//* ACTIVATION:
-+//*
-+//* HISTORY: DATE AUTHOR DESCRIPTION
-+//* 04/29/99 FLW Created
-+//* 01/17/00 Barnett Mod's in support of merging NIC
-+//* hardware rev 6/7 T1.413 codebases.
-+//* 01/21/00 Wagner derfmake mods
-+//* 05/11/00 Barnett hardware_rev is a 2 char string.
-+//* 07/24/00 Barnett Rework as part of host interface redesign.
-+//* 11/29/00 Hunt added chipset_id2
-+//* 03/30/01 Barnett Prefixed all public elements with DSPDP_.
-+//* This insures uniqueness of names that might
-+//* match host names by coincidence.
-+//* 03/30/01 Barnett Added DSPDP_Host_VersionDef to facilitate
-+//* representing a version id for the host i/f
-+//* separate from the firmware version id as
-+//* a courtesy to the host.
-+//* 07/23/01 JEB Changed name from verdef_u.h to dpsys_verdef.h
-+//* 04/12/02 Barnett Make timestamp unsigned 32-bit field.
-+//* Generalizes for all kinds of hosts.
-+//* 11/15/02 JEB Changed name from dpsys_verdef.h to dev_host_verdef.h
-+//* Updated structs according to coding guidelines
-+//* 12/16/02 JEB Renamed some struct elements for new usage in Ax7
-+//* 01/21/03 MCB Implemented Ax7 UNIT-MODULE modular software framework.
-+//* 03/19/03 JEB Added back in "bugFix" elements into each struct type.
-+//* Rearranged elements.
-+//*
-+//********************************************************************
-+
-+#include "env_def_typedefs.h"
-+
-+#define DSPDP_FLAVOR_NEWCODES 0xFF // Other values are valid old-style flavors
-+
-+// ------------------------------
-+// ------------------------------
-+// Begin DSP version definitions.
-+// ------------------------------
-+// ------------------------------
-+
-+typedef struct
-+{
-+ UINT32 timestamp; // Number of seconds since 01/01/1970
-+ UINT8 major; // Major "00".00.00.00 revision nomenclature
-+ UINT8 minor; // Minor 00."00".00.00 revision nomenclature
-+ UINT8 bugFix; // Bug Fix 00.00."00".00 revision nomenclature
-+ UINT8 buildNum; // Build Number 00.00.00."00" revision nomenclature
-+ UINT8 netService; // Network service identifier
-+ UINT8 chipsetGen; // chipset generation
-+ UINT8 chipsetId; // chipset identifier
-+ UINT8 chipsetId2; // second byte for "RV" chipset et al.
-+ UINT8 hardwareRev1; // hardware revision, 1st char
-+ UINT8 hardwareRev2; // hardware revision, 2nd char
-+ UINT8 featureCode; // feature code
-+ UINT8 dummy1; // dummy byte for explicit 32-bit alignment
-+} DEV_HOST_dspVersionDef_t;
-+
-+// -------------------------------
-+// -------------------------------
-+// Begin host version definitions.
-+// -------------------------------
-+// -------------------------------
-+
-+typedef struct
-+{
-+ UINT8 major; // Major "00".00.00.00 revision nomenclature
-+ UINT8 minor; // Minor 00."00".00.00 revision nomenclature
-+ UINT8 bugFix; // Bug Fix 00.00."00".00 revision nomenclature
-+ UINT8 buildNum; // Build Number 00.00.00."00" revision nomenclature
-+ UINT8 netService; // Network service identifier
-+ UINT8 dummy[3]; // dummy bytes for explicit 32-bit alignment
-+} DEV_HOST_hostIntfcVersionDef_t;
-+
-+
-+#endif // __DEV_HOST_VERDEF_H__
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_api.c linux.dev/drivers/atm/sangam_atm/dsl_hal_api.c
---- linux.old/drivers/atm/sangam_atm/dsl_hal_api.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_api.c 2005-08-23 04:46:50.095844000 +0200
-@@ -0,0 +1,3339 @@
-+/*******************************************************************************
-+* FILE PURPOSE: DSL Driver API functions for Sangam
-+*
-+********************************************************************************
-+* FILE NAME: dsl_hal_basicapi.c
-+*
-+* DESCRIPTION:
-+* Contains basic DSL HAL APIs for Sangam
-+*
-+*
-+* (C) Copyright 2001-02, Texas Instruments, Inc.
-+* History
-+* Date Version Notes
-+* 06Feb03 0.00.00 RamP Original Version Created
-+* 10Mar03 0.00.01 RamP Initial Revision for Modular Code Branch
-+* 19Mar03 0.00.02 RamP Fixed DSL and DSP Version API Structures
-+* 20Mar03 0.00.03 RamP Changed byteswap function names
-+* 21Mar03 0.00.03 RamP/ZT Malloc for DSP f/w done in dslStartup
-+* 25Mar03 0.00.04 RamP Removed statistics used only by SWTC
-+* Created Checkpoint 3
-+* 26Mar03 0.00.05 RamP Added Memory allocation for fwimage in
-+* dslStartup function.
-+* 07Apr03 0.00.06 RamP Implemented new error reporting scheme
-+* Changed Commenting to C style only
-+* 09Apr03 0.00.07 RamP Reorganized code to delete POST_SILICON
-+* 10Apr03 0.00.08 RamP Removed ptidsl from loadFWImage function
-+* moved size and fwimage initialization to
-+* dslStartup function
-+* 14Apr03 0.00.09 RamP Moved modemStateBitField processing to a
-+* support function; deleted stateHistory
-+* renamed the REG32 macro
-+* 15Apr03 0.00.10 RamP Changed firmware allocate to shim_
-+* osAllocateVMemory function
-+* 15Apr03 0.00.11 RamP Changed host version number to 07.00.00.01
-+* 16Apr03 0.00.12 RamP Modified return condition on dslShutdown
-+* 16Apr03 0.00.13 RamP Changed host version number to 07.00.00.02
-+* 21Apr03 0.01.00 RamP Cleaned up dslShutdown function
-+* Added new function calls to allocate
-+* (Alpha) /free overlay pages for different OS
-+* Fixed typecasting for allocate/free fxns
-+* Added Interrupt Acknowledge logic
-+* 22Apr03 0.01.01 RamP Moved acknowledgeInterrupt into api
-+* Added static global for intr source
-+* 24Apr03 0.01.02 RamP Added processing for OVERLAY_END in
-+* DSP message handlers, verified crc32
-+* recovery for overlays
-+* 28Apr03 0.01.03 RamP Removed global variable intrSource
-+* Added parameter to handleInterrupt fxn
-+* (Alpha Plus) to indicate interrupt source
-+* Changed version number to 01.00.01.00
-+* Fixed setTrainingMode function problem
-+* 07May03 0.01.04 RamP Removed delineation state check in
-+* message handling functions, added more
-+* safety for setting lConnected in TC_SYNC
-+* Changed version number to 01.00.01.01
-+* 14May03 0.01.05 RamP Added 3 Switchable Hybrid APIs
-+* Added additional statistics us/ds TxPower,
-+* us margin,attenuation, us/ds bitallocation
-+* moved versioning to dsl_hal_version.h
-+* 14May03 0.01.06 RamP Fixed problem with CMsgs2 parsing
-+* 20May03 0.01.07 RamP Added Inner/Outer pair API support. Added
-+* dying gasp message.
-+* 29May03 0.01.08 ZT/RamP Added memory optimizations for overlay pages
-+* and coProfiles; added functions to free,
-+* reload overlays and profiles
-+* 04Jun03 0.01.09 RamP Added tick counters, fail states reporting
-+* Made statistics fixes for higher data rates
-+* Added Margin per tone to statistics
-+* Added configuration checks for trellis/FEC
-+* 06Jun03 0.01.10 RamP Added LED, STM Bert, dGasp LPR Config APIs
-+* Modified interrupt acknowledge logic
-+* Added current hybrid flag as statistic
-+* 09Jun03 0.01.11 RamP Added function to send dying Gasp to Modem
-+* fixed problem with reading OamNegoPara var
-+* (Beta) fixed problem with reading current config
-+* Added function to configure ATM Bert
-+* fixed memory leak due to coProfiles
-+* Added us/ds R/S FEC statistics
-+* Added additional config capability for LED
-+* fixed problem in free memory for CO profiles
-+* 18Jul03 0.01.12 RamP Fixed problem with reading modemEnv structure
-+* affects LED, DGaspLpr APIs
-+* Sending Dying Gasp from shutdown function
-+* 01Aug03 0.01.13 RamP Added preferred training mode to statistics
-+* 13Aug03 0.01.14 MCB Set rev id for D3/R1.1 (ADSL2).
-+* 21Aug03 0.01.15 RamP Added g.hs and aoc bitswap message gathering
-+* Added new references to bits n gains table
-+* Decoupled modem idle/retrain from pair select
-+* Added line length and gross gain to statistics
-+* 29Sep03 0.01.16 RamP Replaced advcfg function calls with support
-+* module function switches
-+* 01Oct03 0.01.17 RamP Added enum translation to set training mode
-+* & to read statistics
-+* 08Oct03 0.01.18 RamP Fixed problems with usTxPower statistic in
-+* Annex B target, fixed problem with Trellis
-+* 12Oct03 0.01.19 RamP Added API calls to gather ADSL2 Messages
-+* 29Oct03 0.01.20 RamP Restored TC_SYNC detect logic
-+* 30Oct03 0.01.21 RamP Removed Scaling factor for adsl2DSConRate
-+* Setting Showtime state upon DSP_ACTIVE
-+* 14Nov03 0.01.22 RamP Fixed scaling for usTxPower & dsTxPower
-+* 14Nov03 0.01.23 RamP Added logic to gather CRates1/RRates1
-+* by parsing DSP_CRATES1
-+* 20Nov03 0.01.24 RamP Added generic & interface Read
-+* and Write functions to read from
-+* DSP - Host Interface
-+* 24Nov03 0.01.25 RamP Modified interface Read/Write functions
-+* to seperate element offsets from pointers
-+* 19Dec03 0.01.26 RamP Modified pointer accessing problems with
-+* block read functions
-+* 26Dec03 0.01.27 RamP Made ghsIndex a local variable & added
-+* check to avoid buffer overflow
-+* 30Dec03 0.01.28 RamP Added generic mailbox command function
-+*******************************************************************************/
-+#include "dsl_hal_register.h"
-+#include "dsl_hal_support.h"
-+#include "dsl_hal_logtable.h"
-+#include "dsl_hal_version.h"
-+
-+static unsigned int hybrid_selected;
-+static unsigned int showtimeFlag = FALSE;
-+
-+#ifdef PRE_SILICON
-+/*********************************************/
-+/* Base Addresses */
-+/*********************************************/
-+#define DEV_MDMA_BASE 0x02000500
-+
-+/*********************************************/
-+/* MC DMA Control Registers in DSL */
-+/*********************************************/
-+
-+#define DEV_MDMA0_SRC_ADDR (DEV_MDMA_BASE + 0x00000000)
-+#define DEV_MDMA0_DST_ADDR (DEV_MDMA_BASE + 0x00000004)
-+#define DEV_MDMA0_CTL_ADDR (DEV_MDMA_BASE + 0x00000008)
-+#define DEV_MDMA1_SRC_ADDR (DEV_MDMA_BASE + 0x00000040)
-+#define DEV_MDMA1_DST_ADDR (DEV_MDMA_BASE + 0x00000044)
-+#define DEV_MDMA1_CTL_ADDR (DEV_MDMA_BASE + 0x00000048)
-+#define DEV_MDMA2_SRC_ADDR (DEV_MDMA_BASE + 0x00000080)
-+#define DEV_MDMA2_DST_ADDR (DEV_MDMA_BASE + 0x00000084)
-+#define DEV_MDMA2_CTL_ADDR (DEV_MDMA_BASE + 0x00000088)
-+#define DEV_MDMA3_SRC_ADDR (DEV_MDMA_BASE + 0x000000C0)
-+#define DEV_MDMA3_DST_ADDR (DEV_MDMA_BASE + 0x000000C4)
-+#define DEV_MDMA3_CTL_ADDR (DEV_MDMA_BASE + 0x000000C8)
-+
-+#define DEV_MDMA0_SRC (*((volatile UINT32 *) DEV_MDMA0_SRC_ADDR))
-+#define DEV_MDMA0_DST (*((volatile UINT32 *) DEV_MDMA0_DST_ADDR))
-+#define DEV_MDMA0_CTL (*((volatile UINT32 *) DEV_MDMA0_CTL_ADDR))
-+#define DEV_MDMA1_SRC (*((volatile UINT32 *) DEV_MDMA1_SRC_ADDR))
-+#define DEV_MDMA1_DST (*((volatile UINT32 *) DEV_MDMA1_DST_ADDR))
-+#define DEV_MDMA1_CTL (*((volatile UINT32 *) DEV_MDMA1_CTL_ADDR))
-+#define DEV_MDMA2_SRC (*((volatile UINT32 *) DEV_MDMA2_SRC_ADDR))
-+#define DEV_MDMA2_DST (*((volatile UINT32 *) DEV_MDMA2_DST_ADDR))
-+#define DEV_MDMA2_CTL (*((volatile UINT32 *) DEV_MDMA2_CTL_ADDR))
-+#define DEV_MDMA3_SRC (*((volatile UINT32 *) DEV_MDMA3_SRC_ADDR))
-+#define DEV_MDMA3_DST (*((volatile UINT32 *) DEV_MDMA3_DST_ADDR))
-+#define DEV_MDMA3_CTL (*((volatile UINT32 *) DEV_MDMA3_CTL_ADDR))
-+
-+/* MDMA control bits */
-+
-+#define DEV_MDMA_START 0x80000000
-+#define DEV_MDMA_STOP 0x00000000
-+#define DEV_MDMA_STATUS 0x40000000
-+#define DEV_MDMA_DST_INC 0x00000000
-+#define DEV_MDMA_DST_FIX 0x02000000
-+#define DEV_MDMA_SRC_INC 0x00000000
-+#define DEV_MDMA_SRC_FIX 0x00800000
-+#define DEV_MDMA_BURST1 0x00000000
-+#define DEV_MDMA_BURST2 0x00100000
-+#define DEV_MDMA_BURST4 0x00200000
-+
-+#define DEV_MDMA_LEN_SHF 2
-+#define DEV_MDMA_LEN_MASK 0x0000FFFF
-+
-+#define DMA0 0
-+#define DMA1 1
-+#define DMA2 2
-+#define DMA3 3
-+#endif
-+#ifdef DMA
-+SINT32 getDmaStatus(UINT32 mask)
-+{
-+ if(!(IFR & mask))
-+ {
-+ return DSLHAL_ERROR_NO_ERRORS;
-+ }
-+ else
-+ {
-+ ICR = mask ;
-+ return 1 ;
-+ }
-+}
-+
-+void programMdma(UINT32 dma, UINT32 source, UINT32 destination, UINT32 length, UINT32 wait)
-+{
-+ volatile UINT32 statusMask ;
-+
-+ switch(dma)
-+ {
-+ case DMA0:
-+ {
-+ DEV_MDMA0_SRC = source ;
-+ DEV_MDMA0_DST = destination ;
-+ DEV_MDMA0_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
-+ DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
-+ statusMask = 0x00000010 ;
-+ }
-+ break ;
-+ case DMA1:
-+ {
-+ DEV_MDMA1_SRC = source ;
-+ DEV_MDMA1_DST = destination ;
-+ DEV_MDMA1_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
-+ DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
-+ statusMask = 0x00000020 ;
-+ }
-+ break ;
-+ case DMA2:
-+ {
-+ DEV_MDMA2_SRC = source ;
-+ DEV_MDMA2_DST = destination ;
-+ DEV_MDMA2_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
-+ DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
-+ statusMask = 0x00000040 ;
-+ }
-+ break ;
-+ case DMA3:
-+ {
-+ DEV_MDMA3_SRC = source ;
-+ DEV_MDMA3_DST = destination ;
-+ DEV_MDMA3_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
-+ DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ;
-+ statusMask = 0x00000080 ;
-+ }
-+ break ;
-+
-+ }
-+
-+ if(wait)
-+ {
-+ while(!(getDmaStatus(statusMask))) ;
-+ }
-+
-+}
-+#endif
-+
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_dslStartup
-+*
-+*******************************************************************************************
-+* DESCRIPTION: Entry point to initialize and load ax5 daughter board
-+*
-+* INPUT: PITIDSLHW_T *ppIHw
-+*
-+* RETURN: 0 --succeeded
-+* 1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_api_dslStartup(PITIDSLHW_T *ppIHw)
-+{
-+
-+ ITIDSLHW_T *ptidsl;
-+ int i;
-+ int rc;
-+ dprintf(4,"dslhal_api_dslStartup() NEW 1\n");
-+
-+ ptidsl=(ITIDSLHW_T *)shim_osAllocateMemory(sizeof(ITIDSLHW_T));
-+ if(ptidsl==NULL)
-+ {
-+ dprintf(1, "unable to allocate memory for ptidsl\n");
-+ return 1;
-+ }
-+ *ppIHw=ptidsl;
-+ shim_osZeroMemory((char *) ptidsl, sizeof(ITIDSLHW_T));
-+
-+ /* Unreset the ADSL Subsystem */
-+ rc=dslhal_support_unresetDslSubsystem();
-+ if(rc)
-+ {
-+ dprintf(1, "unable to reset ADSL Subsystem \n");
-+ shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
-+ return DSLHAL_ERROR_UNRESET_ADSLSS;
-+ }
-+ ptidsl->fwimage = shim_osAllocateVMemory(DSP_FIRMWARE_MALLOC_SIZE);
-+ if(!ptidsl->fwimage)
-+ {
-+ dprintf(1,"Failed to Allocate Memory for DSP firmware binary \n");
-+ return DSLHAL_ERROR_FIRMWARE_MALLOC;
-+ }
-+ /* read firmware file from flash */
-+ rc=shim_osLoadFWImage(ptidsl->fwimage);
-+ if(rc<0)
-+ {
-+ dprintf(1, "unable to get fw image\n");
-+ shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
-+ shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
-+ return DSLHAL_ERROR_NO_FIRMWARE_IMAGE;
-+ }
-+ else
-+ {
-+ ptidsl->imagesize = rc;
-+ }
-+ /* Compute the CRC checksum on the image and validate the image */
-+
-+ /* Validate the image in the RAM */
-+
-+ /* load fw to DSP */
-+
-+ if(dslhal_support_hostDspCodeDownload(ptidsl))
-+ {
-+ dprintf(0,"dsp load error\n");
-+ for(i=0; i<NUM_PAGES; i++)
-+ {
-+ if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
-+ {
-+ shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr,
-+ ptidsl->olayDpPage[i].OverlayXferCount);
-+ }
-+ }
-+ if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
-+ shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
-+ if(ptidsl->constDisplay.PmemStartWtAddr != NULL)
-+ shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount);
-+ shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
-+ shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
-+ return DSLHAL_ERROR_CODE_DOWNLOAD;
-+ }
-+
-+ /* set flag to indicated overlay pages are loaded */
-+ ptidsl->bOverlayPageLoaded = 1;
-+ /* set auto retrain to 1 to disble the overlay page reload */
-+ ptidsl->bAutoRetrain = 1;
-+
-+ /* unreset Raptor */
-+ /* change this to new function */
-+ /* This function should basically bring DSP out of reset bit 23 of PRCR */
-+ /* Function is ready but bypassed for Pre-Silicon */
-+
-+ rc=dslhal_support_unresetDsp();
-+ if (rc)
-+ {
-+ dprintf(0,"unable to bring DSP out of Reset\n");
-+ for(i=0; i<NUM_PAGES; i++)
-+ {
-+ if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
-+ {
-+ shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr,
-+ ptidsl->olayDpPage[i].OverlayXferCount);
-+ }
-+ }
-+ if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
-+ shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
-+ if(ptidsl->constDisplay.PmemStartWtAddr != NULL)
-+ shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount);
-+ shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
-+ shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T));
-+ return DSLHAL_ERROR_UNRESET_DSP;
-+ }
-+ shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE);
-+ dprintf(4,"dslhal_api_dslStartup() done\n");
-+
-+ /* Add the code to initialize the host interface variables */
-+ /* Add code to tickle the host interface */
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_dslShutdown
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: routine to shutdown ax5 modem and free the resource
-+ *
-+ * INPUT: tidsl_t *ptidsl
-+ *
-+ * RETURN: NULL
-+ *
-+ *
-+ *****************************************************************************************/
-+
-+int dslhal_api_dslShutdown(tidsl_t *ptidsl)
-+{
-+ int rc= DSLHAL_ERROR_NO_ERRORS;
-+ int i;
-+
-+ dprintf(5, "dslhal_api_dslShutdown\n");
-+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DSLSS_SHUTDOWN, 0, 0, 0);
-+ if(rc)
-+ {
-+ dprintf(1, " unable to reset DSP \n");
-+ rc = DSLHAL_ERROR_RESET_DSP;
-+ }
-+ /* DSP need 50 ms to send out the message*/
-+
-+ shim_osClockWait(60 * 1000);
-+
-+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DGASP, 0, 0, 0);
-+
-+ /* free memory allocated*/
-+
-+ for(i=0; i<NUM_PAGES; i++)
-+ {
-+ if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
-+ {
-+ shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr,
-+ ptidsl->olayDpPage[i].OverlayXferCount);
-+ }
-+ }
-+ if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
-+ shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
-+ if(ptidsl->constDisplay.PmemStartWtAddr != NULL)
-+ shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount);
-+ shim_osFreeMemory((void *)ptidsl, sizeof(tidsl_t));
-+ rc = dslhal_support_resetDsp();
-+ if(rc)
-+ {
-+ dprintf(1, " unable to reset ADSL subsystem \n");
-+ rc = DSLHAL_ERROR_RESET_DSP;
-+ }
-+ rc = dslhal_support_resetDslSubsystem();
-+ if(rc)
-+ {
-+ dprintf(1, " unable to reset ADSL subsystem \n");
-+ rc = DSLHAL_ERROR_RESET_ADSLSS;
-+ }
-+return rc;
-+}
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_getDslHalVersion
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This routine supply DSL Driver version.
-+*
-+* INPUT: tidsl_t * ptidsl
-+* void *pVer, DSP Driver Version Pointer
-+*
-+* RETURN: 0 --succeeded
-+* 1 --Failed
-+* Note: See verdef_u.h for version structure definition.
-+*****************************************************************************************/
-+
-+void dslhal_api_getDslHalVersion(void *pVer)
-+{
-+ dslVer *pVersion;
-+ pVersion = (dslVer *)pVer;
-+ pVersion->major = (unsigned char) DSLHAL_VERSION_MAJOR;
-+ pVersion->minor = (unsigned char) DSLHAL_VERSION_MINOR;
-+ pVersion->bugfix = (unsigned char) DSLHAL_VERSION_BUGFIX;
-+ pVersion->buildNum = (unsigned char) DSLHAL_VERSION_BUILDNUM;
-+ pVersion->timeStamp = (unsigned char) DSLHAL_VERSION_TIMESTAMP;
-+}
-+
-+/********************************************************************************************
-+ * FUNCTION NAME: dslhal_api_pollTrainingStatus()
-+ *
-+ *********************************************************************************************
-+ * DESCRIPTION: code to decode modem status and to start modem training
-+ * Input: tidsl_t *ptidsl
-+ *
-+ * Return: modem status
-+ * -1 failed
-+ *
-+ ********************************************************************************************/
-+
-+int dslhal_api_pollTrainingStatus(tidsl_t *ptidsl)
-+{
-+ int cmd;
-+ int tag;
-+ int parm1,parm2;
-+ int rc;
-+ unsigned int failState;
-+ static unsigned int pollGhsIndex=0;
-+
-+ /*char *tmp;*/
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+#if SWTC
-+ DEV_HOST_tcHostCommDef_t TCHostCommDef;
-+#endif
-+
-+ dprintf(5,"dslhal_api_pollTrainingStatus\n");
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,
-+ sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+#if SWTC
-+ dspOamSharedInterface.tcHostComm_p =(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p,
-+ &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+#endif
-+
-+ rc = dslhal_support_processTrainingState(ptidsl);
-+ if(rc)
-+ {
-+ dprintf(0,"Error Reading Modem Training State \n");
-+ return DSLHAL_ERROR_MODEMSTATE;
-+ }
-+ rc = dslhal_support_processModemStateBitField(ptidsl);
-+ if(rc)
-+ {
-+ dprintf(0,"Error Reading Modem Training State \n");
-+ return DSLHAL_ERROR_MODEMSTATE;
-+ }
-+ /*
-+ rc = dslhal_support_readDelineationState(ptidsl);
-+ if(rc)
-+ {
-+ dprintf(0,"Error Reading Delineation State \n");
-+ return DSLHAL_ERROR_MODEMSTATE;
-+ }
-+ */
-+ while (dslhal_support_readDspMailbox(ptidsl,&cmd, &tag, &parm1, &parm2) == DSLHAL_ERROR_NO_ERRORS )
-+ {
-+ dprintf(4,"mailbox message: 0x%x\n", cmd);
-+ /*
-+ for(rc=0;rc<8;rc++)
-+ {
-+ dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2);
-+ }
-+ */
-+
-+ if (cmd == DSP_IDLE)
-+ {
-+ dprintf(4,"DSP_IDLE\n");
-+ ptidsl->lConnected=0;
-+ hybrid_selected=888;
-+ /* add code for reload overlay pages */
-+ if(ptidsl->bAutoRetrain == 0)
-+ {
-+ while(ptidsl->bOverlayPageLoaded == 0)
-+ {
-+ shim_osClockWait(6400);
-+ }
-+ //dslhal_support_restoreTrainingInfo(ptidsl);
-+ //ptidsl->bOverlayPageLoaded = 1;
-+ }
-+ /* command DSP to ACTREQ */
-+ if(showtimeFlag == TRUE)
-+ {
-+ dslhal_api_resetTrainFailureLog(ptidsl);
-+ dslhal_support_advancedIdleProcessing(ptidsl);
-+ showtimeFlag = FALSE;
-+ }
-+ failState = (unsigned int)parm1;
-+ if(failState!=0)
-+ {
-+ ptidsl->AppData.trainFailStates[ptidsl->AppData.trainFails]=failState;
-+ ptidsl->AppData.trainFails++;
-+ if(ptidsl->AppData.trainFails > 30)
-+ ptidsl->AppData.trainFails=0;
-+ }
-+ for(pollGhsIndex=0;pollGhsIndex<10;pollGhsIndex++)
-+ {
-+ for(rc=0;rc<62;rc++)
-+ ptidsl->AppData.dsl_ghsRxBuf[pollGhsIndex][rc]=0;
-+ }
-+ pollGhsIndex=0;
-+ rc = dslhal_support_writeHostMailbox(ptidsl,HOST_ACTREQ, 0, 0, 0);
-+ if (rc)
-+ return DSLHAL_ERROR_MAILBOX_WRITE;
-+ }
-+
-+ if(cmd == DSP_ATM_TC_SYNC)
-+ {
-+ dprintf(4,"\nTC_SYNC\n");
-+ showtimeFlag = TRUE;
-+ ptidsl->lConnected=1;
-+ if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 1)
-+ {
-+ dslhal_support_clearTrainingInfo(ptidsl);
-+ ptidsl->bOverlayPageLoaded = 0;
-+ }
-+ }
-+ if(cmd == DSP_ACTIVE)
-+ {
-+ dprintf(4,"DSP_ACTIVE");
-+ ptidsl->lConnected=0;
-+ ptidsl->AppData.bState = RSTATE_SHOWTIME;
-+ dprintf(4,"US Connect Rate: %u \n",ptidsl->AppData.USConRate);
-+ dprintf(4,"DS Connect Rate: %u \n",ptidsl->AppData.DSConRate);
-+ }
-+ if(cmd == DSP_ATM_NO_TC_SYNC)
-+ {
-+ dprintf(4,"\nTC_NOSYNC\n");
-+ ptidsl->lConnected=0;
-+ }
-+ if(cmd == DSP_DGASP)
-+ {
-+ dprintf(0,"\n GASP!!! \n");
-+ }
-+ if(cmd == DSP_OVERLAY_END)
-+ {
-+ dprintf(4,"Overlay Page Done %d \n",tag);
-+ rc = dslhal_support_checkOverlayPage(ptidsl,tag);
-+ if(rc == DSLHAL_ERROR_OVERLAY_CORRUPTED)
-+ {
-+ dprintf(0,"Overlay Page: %d CORRUPTED \n",tag);
-+ return (0-DSLHAL_ERROR_OVERLAY_CORRUPTED);
-+ }
-+ }
-+ if(cmd == DSP_HYBRID)
-+ {
-+ dprintf(2,"Hybrid Metrics Available: %d\n",tag);
-+ hybrid_selected = tag;
-+ }
-+ if(cmd == DSP_DGASP)
-+ {
-+ dprintf(0,"\n GASP!!! \n");
-+ }
-+ if(cmd == DSP_XMITBITSWAP)
-+ {
-+ dslhal_support_aocBitSwapProcessing(ptidsl,0);
-+ }
-+ if(cmd == DSP_RCVBITSWAP)
-+ {
-+ dslhal_support_aocBitSwapProcessing(ptidsl,1);
-+ }
-+ if(cmd == DSP_GHSMSG)
-+ {
-+ dprintf(3,"Ghs Message Received, bytes: %d \n",tag);
-+ dprintf(3,"Addr: 0x%x\n",dspOamSharedInterface.ghsDspRxBuf_p);
-+ if(pollGhsIndex > 9)
-+ pollGhsIndex=0;
-+ rc = dslhal_support_blockRead((void *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.ghsDspRxBuf_p), &ptidsl->AppData.dsl_ghsRxBuf[pollGhsIndex++][0], tag);
-+ }
-+ if(cmd == DSP_CRATES1)
-+ {
-+ dprintf(3,"DSP C-Rates1 Data Ready \n");
-+ rc = dslhal_support_gatherRateMessages(ptidsl);
-+ }
-+ if(cmd == DSP_SNR)
-+ {
-+ dprintf(3,"DSP SNR Data Ready \n");
-+ rc = dslhal_support_gatherSnrPerBin(ptidsl,tag);
-+ }
-+ if(cmd == DSP_EOC)
-+ {
-+ dprintf(3,"DSP_EOC message \n");
-+ rc = dslhal_support_gatherEocMessages(ptidsl,tag,parm1,parm2);
-+ }
-+
-+ if(cmd == DSP_TRAINING_MSGS)
-+ {
-+ dprintf(3,"DSP_TRAINING_MSGS \n");
-+ rc = dslhal_support_gatherAdsl2Messages(ptidsl,tag,parm1,parm2);
-+ }
-+ }
-+ dprintf(6,"dslhal_api_pollTrainingStatus done\n");
-+ return(ptidsl->AppData.bState);
-+
-+} /* end of dslhal_api_pollTrainingStatus() */
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_handleTrainingInterrupt()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Code to handle ax5 hardware interrupts
-+*
-+* Input: tidsl_t *ptidsl
-+* int *pMsg, pointer to returned hardware messages. Each byte represent a messge
-+* int *pTag, pointer to returned hardware message tags. Each byte represent a tag.
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+int dslhal_api_handleTrainingInterrupt(tidsl_t *ptidsl, int intrSource)
-+{
-+ int cmd;
-+ int tag;
-+ int parm1,parm2;
-+ unsigned int msg1;
-+ unsigned int msg2;
-+ int rc;
-+ unsigned int failState;
-+ static unsigned int interruptGhsIndex=0;
-+ /*char *tmp;*/
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+#if SWTC
-+ DEV_HOST_tcHostCommDef_t TCHostCommDef;
-+#endif
-+ dprintf(6,"dslhal_api_handleTrainingInterrupt\n");
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,
-+ sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+#if SWTC
-+ dspOamSharedInterface.tcHostComm_p =(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p,
-+ &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+#endif
-+
-+ if(intrSource & MASK_BITFIELD_INTERRUPTS)
-+ {
-+ dspOamSharedInterface.modemStateBitField_p =(DEV_HOST_modemStateBitField_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStateBitField_p);
-+ rc = dslhal_support_processTrainingState(ptidsl);
-+ if(rc)
-+ {
-+ dprintf(0,"Error Reading Modem Training State \n");
-+ return DSLHAL_ERROR_MODEMSTATE;
-+ }
-+ rc = dslhal_support_processModemStateBitField(ptidsl);
-+ if(rc)
-+ {
-+ dprintf(0,"Error Reading Modem Training State \n");
-+ return DSLHAL_ERROR_MODEMSTATE;
-+ }
-+ }
-+ if(intrSource & MASK_MAILBOX_INTERRUPTS)
-+ {
-+ /*
-+ rc = dslhal_support_readDelineationState(ptidsl);
-+ if(rc)
-+ {
-+ dprintf(0,"Error Reading Delineation State \n");
-+ return DSLHAL_ERROR_MODEMSTATE;
-+ }
-+ */
-+ while (dslhal_support_readDspMailbox(ptidsl,&cmd, &tag, &parm1, &parm2) == DSLHAL_ERROR_NO_ERRORS )
-+ {
-+ dprintf(4,"mailbox message: 0x%x\n", cmd);
-+ /*
-+ for(rc=0;rc<8;rc++)
-+ {
-+ dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2);
-+ }
-+ */
-+ if (cmd == DSP_IDLE)
-+ {
-+ dprintf(4,"DSP_IDLE\n");
-+ ptidsl->lConnected=0;
-+ hybrid_selected=888;
-+ if(showtimeFlag == TRUE)
-+ {
-+ dslhal_api_resetTrainFailureLog(ptidsl);
-+ dslhal_support_advancedIdleProcessing(ptidsl);
-+ showtimeFlag = FALSE;
-+ }
-+ failState = (unsigned int)parm1;
-+ if(failState!=0)
-+ {
-+ ptidsl->AppData.trainFailStates[ptidsl->AppData.trainFails]=failState;
-+ ptidsl->AppData.trainFails++;
-+ if(ptidsl->AppData.trainFails > 30)
-+ ptidsl->AppData.trainFails=0;
-+ }
-+ for(interruptGhsIndex=0;interruptGhsIndex<10;interruptGhsIndex++)
-+ {
-+ for(rc=0;rc<62;rc++)
-+ ptidsl->AppData.dsl_ghsRxBuf[interruptGhsIndex][rc]=0;
-+ }
-+ interruptGhsIndex=0;
-+
-+ /* add code for reload overlay pages */
-+ if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 0)
-+ {
-+ dslhal_support_restoreTrainingInfo(ptidsl);
-+ ptidsl->bOverlayPageLoaded = 1;
-+ }
-+ /* command DSP to ACTREQ */
-+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_ACTREQ, 0, 0, 0);
-+ if (rc)
-+ return DSLHAL_ERROR_MAILBOX_WRITE;
-+ }
-+ if(cmd == DSP_ATM_TC_SYNC)
-+ {
-+ dprintf(4,"\nTC_SYNC\n");
-+ showtimeFlag = TRUE;
-+ ptidsl->lConnected=1;
-+ if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 1)
-+ {
-+ dslhal_support_clearTrainingInfo(ptidsl);
-+ ptidsl->bOverlayPageLoaded = 0;
-+ }
-+ }
-+ if(cmd == DSP_ACTIVE)
-+ {
-+ ptidsl->lConnected=0;
-+ ptidsl->AppData.bState = RSTATE_SHOWTIME;
-+ dprintf(4,"DSP_ACTIVE");
-+ dprintf(4,"US Connect Rate: %u \n",ptidsl->AppData.USConRate);
-+ dprintf(4,"DS Connect Rate: %u \n",ptidsl->AppData.DSConRate);
-+ }
-+ if(cmd == DSP_ATM_NO_TC_SYNC)
-+ {
-+ dprintf(4,"\nTC_NOSYNC\n");
-+ ptidsl->lConnected=0;
-+ /* add code for reload overlay pages */
-+ }
-+ if(cmd == DSP_OVERLAY_END)
-+ {
-+ dprintf(4,"Overlay Page Done %d \n",tag);
-+ rc = dslhal_support_checkOverlayPage(ptidsl,tag);
-+ if(rc == DSLHAL_ERROR_OVERLAY_CORRUPTED)
-+ {
-+ dprintf(4,"Overlay Page: %d CORRUPTED \n",tag);
-+ return(0-DSLHAL_ERROR_OVERLAY_CORRUPTED);
-+ }
-+ }
-+ if(cmd == DSP_HYBRID)
-+ {
-+ dprintf(2,"Hybrid Metrics Available\n");
-+ hybrid_selected = tag;
-+ }
-+ if(cmd == DSP_XMITBITSWAP)
-+ {
-+ rc = dslhal_support_aocBitSwapProcessing(ptidsl,0);
-+ }
-+ if(cmd == DSP_RCVBITSWAP)
-+ {
-+ rc = dslhal_support_aocBitSwapProcessing(ptidsl,1);
-+ }
-+ if(cmd == DSP_GHSMSG)
-+ {
-+ dprintf(3,"Ghs Message Received, bytes: %d \n",tag);
-+ dprintf(3,"Addr: 0x%x\n",dspOamSharedInterface.ghsDspRxBuf_p);
-+ if(interruptGhsIndex > 9)
-+ interruptGhsIndex=0;
-+ rc = dslhal_support_blockRead((void *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.ghsDspRxBuf_p), &ptidsl->AppData.dsl_ghsRxBuf[interruptGhsIndex++][0], tag);
-+ }
-+ if(cmd == DSP_CRATES1)
-+ {
-+ dprintf(3,"DSP C-Rates1 Data Ready \n");
-+ rc = dslhal_support_gatherRateMessages(ptidsl);
-+ }
-+ if(cmd == DSP_SNR)
-+ {
-+ dprintf(3,"DSP SNR Data Ready \n");
-+ rc = dslhal_support_gatherSnrPerBin(ptidsl,tag);
-+ }
-+ if(cmd == DSP_EOC)
-+ {
-+ dprintf(3,"DSP_EOC message \n");
-+ rc = dslhal_support_gatherEocMessages(ptidsl,tag,parm1,parm2);
-+ }
-+ if(cmd == DSP_TRAINING_MSGS)
-+ {
-+ dprintf(3,"DSP_TRAINING_MSGS \n");
-+ rc = dslhal_support_gatherAdsl2Messages(ptidsl,tag,parm1,parm2);
-+ }
-+ }
-+
-+ dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2);
-+ dprintf(5,"Text Message Part1: 0x%x \t Text Message Part2: 0x%x \n",msg1,msg2);
-+ }
-+ dprintf(6,"dslhal_api_handleTrainingInterrupt done\n");
-+ return(ptidsl->AppData.bState);
-+} /* end of dslhal_api_handleTrainingInterrupt() */
-+
-+
-+
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_dslRetrain(tidsl_t *ptidsl)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends CMD_ACTREQ to the DSP to issue a retrain
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_dslRetrain(tidsl_t *ptidsl)
-+{
-+ int rc;
-+
-+ dprintf(5, "dslhal_cfg_dslRetrain \n");
-+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_QUIET, 0, 0, 0);
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_cfg_dslRetrain failed\n");
-+ return DSLHAL_ERROR_CTRL_API_FAILURE;
-+ }
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_sendQuiet(tidsl_t *ptidsl)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_sendQuiet(tidsl_t *ptidsl)
-+{
-+ int rc;
-+
-+ dprintf(5, "dslhal_api_sendQuiet\n");
-+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_QUIET, 0, 0, 0);
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_api_sendQuiet failed\n");
-+ return DSLHAL_ERROR_CTRL_API_FAILURE;
-+ }
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_sendIdle(tidsl_t *ptidsl)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the CMD_IDLE message to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_sendIdle(tidsl_t *ptidsl)
-+{
-+ int rc;
-+
-+ dprintf(5, "dslhal_api_sendIdle\n");
-+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_IDLE, 0, 0, 0);
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_api_sendIdle failed\n");
-+ return DSLHAL_ERROR_CTRL_API_FAILURE;
-+ }
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_sendDgasp(tidsl_t *ptidsl)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the HOST_DGASP message to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_sendDgasp(tidsl_t *ptidsl)
-+{
-+ int rc;
-+
-+ dprintf(5, "dslhal_api_sendDgasp\n");
-+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DGASP, 0, 0, 0);
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_api_sendDgasp failed\n");
-+ return DSLHAL_ERROR_CTRL_API_FAILURE;
-+ }
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Desired Training Mode {None/Multimode/G.dmt/lite
-+*
-+* INPUT: PITIDSLHW_T *ptidsl
-+* unsigned int trainmode :Should be between 0 and 4; 0:No Mode 1:Multimode
-+* 2: T1.413, 3:G.dmt, 4: G.lite
-+* RETURN: 0 SUCCESS
-+* 1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode)
-+{
-+ DEV_HOST_oamWrNegoParaDef_t NegoPara;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+ dprintf(5," dslhal_api_setTrainingMode()\n");
-+ if(trainmode>255)
-+ {
-+ dprintf(3,"Invalid Value for Desired Training Mode (must be <255)\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,
-+ sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+ rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ /* Enum Translation to maintain backwards compatibility for train modes */
-+ if(trainmode == DSLTRAIN_MULTI_MODE)
-+ trainmode = MULTI_MODE;
-+ if(trainmode == DSLTRAIN_T1413_MODE)
-+ trainmode = T1413_MODE;
-+ if(trainmode == DSLTRAIN_GDMT_MODE)
-+ trainmode = GDMT_MODE;
-+
-+ NegoPara.stdMode = trainmode;
-+ dprintf(5,"Train Mode: 0x%x\n",trainmode);
-+ rc = dslhal_support_blockWrite(&NegoPara,(PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+
-+ dprintf(5," dslhal_api_setTrainingMode() Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_getDspVersion
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This routine supply AX5 daugther card DSP version.
-+*
-+* INPUT: tidsl_t * ptidsl
-+* void *pVer, DSP version struct is returned starting at this pointer
-+*
-+* RETURN: 0 --succeeded
-+* 1 --Failed
-+* Note: See verdef_u.h for version structure definition.
-+*****************************************************************************************/
-+int dslhal_api_getDspVersion(tidsl_t *ptidsl, void *pVer)
-+{
-+ /* DEV_HOST_dspVersionDef_t dspVersion; */
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+ dprintf(5, "dslhal_api_getDspVersion\n");
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ if(!pVer)
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+
-+ *(unsigned int *) pVer = 0;
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.datapumpVersion_p = (DEV_HOST_dspVersionDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.datapumpVersion_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.datapumpVersion_p,
-+ pVer, sizeof(dspVer));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ pVer = (DEV_HOST_dspVersionDef_t *)(dslhal_support_byteSwap32((unsigned int)pVer));
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_gatherStatistics()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Read statistical infromation from ax5 modem daugter card.
-+* Input: tidsl_t *ptidsl
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+void dslhal_api_gatherStatistics(tidsl_t * ptidsl)
-+{
-+ int rc,optIdxU,optIdxD,i;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ DEV_HOST_dspWrNegoParaDef_t rateparms;
-+ DEV_HOST_oamWrNegoParaDef_t configParms;
-+ DEV_HOST_modemStatsDef_t StatisticsDef;
-+ DEV_HOST_errorStats_t usIntlvError, usFastError, dsIntlvError, dsFastError;
-+ DEV_HOST_atmStats_t atmStats;
-+ DEV_HOST_usAtmStats_t usAtmStats0, usAtmStats1;
-+ DEV_HOST_dsAtmStats_t dsAtmStats0,dsAtmStats1;
-+ DEV_HOST_dspWrSuperFrameCntDef_t SuperFrameCnt;
-+ DEV_HOST_msg_t atuc_msg, aturMsg;
-+ DEV_HOST_eocVarDef_t eocVar;
-+ DEV_HOST_dspWrSharedTables_t sharedTables;
-+ DEV_HOST_phyPerf_t phyPerf;
-+ unsigned char usBits[64],dsBits[256];
-+ unsigned char dsPowerCutBack;
-+ int usNumLoadedTones=0, dsNumLoadedTones=0;
-+
-+ dprintf(5, "dslhal_api_gatherStatistics\n");
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,
-+ sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ if(!ptidsl->bStatisticsInitialized && ptidsl->lConnected == LINE_CONNECTED)
-+ {
-+ dslhal_api_initStatistics(ptidsl);
-+ ptidsl->bStatisticsInitialized = TRUE;
-+ }
-+
-+ dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p,
-+ &rateparms, sizeof(DEV_HOST_dspWrNegoParaDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ if(!rc)
-+ {
-+ /* trained mode */
-+ ptidsl->AppData.dsl_modulation = (unsigned int)rateparms.trainMode;
-+ if(rateparms.trainMode == T1413_MODE)
-+ ptidsl->AppData.dsl_modulation = DSLTRAIN_T1413_MODE;
-+ if(rateparms.trainMode == GDMT_MODE)
-+ ptidsl->AppData.dsl_modulation = DSLTRAIN_GDMT_MODE;
-+ /* rate */
-+ /* shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)rateparms.cRates1, 120); */
-+ ptidsl->AppData.bCRates2 = rateparms.cRates2;
-+ /* shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)rateparms.rRates1, 44); */
-+ ptidsl->AppData.bRRates2 = rateparms.rRates2;
-+ shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs1, (void *)rateparms.cMsgs1, 6);
-+ shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs2, (void *)rateparms.cMsgs2, 4);
-+ shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs2, (void *)rateparms.rMsgs2, 4);
-+ ptidsl->AppData.atucVendorId = (unsigned int)rateparms.atucVendorId;
-+ ptidsl->AppData.lineLength = (unsigned int)dslhal_support_byteSwap16((unsigned short)rateparms.lineLength);
-+ ptidsl->AppData.atucRevisionNum = (unsigned int)rateparms.atucGhsRevisionNum;
-+ ptidsl->AppData.usLineAttn = (ptidsl->AppData.bCMsgs2[3] >>2)&0x003f;
-+ ptidsl->AppData.usMargin = (ptidsl->AppData.bCMsgs2[2])&0x001f;
-+
-+ if((rateparms.cRates2 & 0x0f) == 0x01)
-+ optIdxU = 0;
-+ else if((rateparms.cRates2 & 0x0f) == 0x02)
-+ optIdxU = 1;
-+ else if((rateparms.cRates2 & 0x0f) == 0x04)
-+ optIdxU = 2;
-+ else if((rateparms.cRates2 & 0x0f) == 0x08)
-+ optIdxU = 3;
-+ else
-+ optIdxU = -1;
-+
-+ dprintf(5, "optIdxU=%d\n", optIdxU);
-+
-+ /* Obtain the US Rates using Opt# and CRates1 Table */
-+ /* Rate(US) = [Bf(LS0) + Bi(LS0)]*32 */
-+ if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
-+ ptidsl->AppData.USConRate = ((rateparms.cRates1[optIdxU][CRATES1_BF_LS0] + rateparms.cRates1[optIdxU][CRATES1_BI_LS0]) * 32);
-+ else
-+ ptidsl->AppData.USConRate = 32 * dslhal_support_byteSwap16((unsigned short)rateparms.adsl2USRate);
-+
-+ ptidsl->AppData.USPeakCellRate = ptidsl->AppData.USConRate;
-+
-+ if(((rateparms.cRates2 >> 4) & 0x0f) == 0x01)
-+ optIdxD = 0;
-+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x02)
-+ optIdxD = 1;
-+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x04)
-+ optIdxD = 2;
-+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x08)
-+ optIdxD = 3;
-+ else
-+ optIdxD = -1;
-+ /* Obtain the DS Rates using Opt# and CRates1 Table */
-+ /* Rate(DS) = [Bf(AS0) + Bi(AS0)]*32 */
-+ if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
-+ ptidsl->AppData.DSConRate = (((rateparms.cRates1[optIdxD][CRATES1_BF_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BF_DSRS]&0x80)<<1))+ (rateparms.cRates1[optIdxD][CRATES1_BI_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BI_DSRS]&0x80)<<1)))* 32);
-+ else
-+ ptidsl->AppData.DSConRate = dslhal_support_byteSwap16((unsigned short)rateparms.adsl2DSRate);
-+
-+ dprintf(5, "ptidsl->AppData.wDSConRate=%d\n", ptidsl->AppData.DSConRate);
-+ /* Determine which Path has Modem Trained with */
-+ if((rateparms.cRates1[optIdxU][CRATES1_BF_LS0]) && (rateparms.cRates1[optIdxD][CRATES1_BF_AS0]))
-+ ptidsl->AppData.TrainedPath = FAST_PATH;
-+ else
-+ ptidsl->AppData.TrainedPath = INTERLEAVED_PATH;
-+
-+ /* Set the mode in which the modem is trained */
-+ ptidsl->AppData.TrainedMode = (unsigned int)rateparms.trainMode;
-+ if(rateparms.trainMode == T1413_MODE)
-+ ptidsl->AppData.TrainedMode = DSLTRAIN_T1413_MODE;
-+ if(rateparms.trainMode == GDMT_MODE)
-+ ptidsl->AppData.TrainedMode = DSLTRAIN_GDMT_MODE;
-+
-+ if(ptidsl->AppData.TrainedPath == FAST_PATH)
-+ ptidsl->AppData.dsFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_DSRS]&0x1f);
-+ else
-+ ptidsl->AppData.dsIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_DSRS]&0x1f);
-+ ptidsl->AppData.dsSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0x1f);
-+ ptidsl->AppData.dsInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_DSI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0xc0)<<2));
-+
-+ if(ptidsl->AppData.TrainedPath == FAST_PATH)
-+ ptidsl->AppData.usFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_USRS]&0x1f);
-+ else
-+ ptidsl->AppData.usIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_USRS]&0x1f);
-+ ptidsl->AppData.usSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0x1f);
-+ ptidsl->AppData.usInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_USI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0xc0)<<2));
-+ }
-+
-+ dspOamSharedInterface.modemStats_p = (DEV_HOST_modemStatsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStats_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemStats_p,&StatisticsDef, sizeof(DEV_HOST_modemStatsDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ /* Populate the Error Structure Variables */
-+
-+ /* US Interleave Path Error Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ StatisticsDef.usErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsIntlv_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsIntlv_p,&usIntlvError, (sizeof(DEV_HOST_errorStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ /* DS Interleave Path Error Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ StatisticsDef.dsErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsIntlv_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsIntlv_p,&dsIntlvError, (sizeof(DEV_HOST_errorStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ /* US Fast Path Error Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ StatisticsDef.usErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsFast_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsFast_p,&usFastError, (sizeof(DEV_HOST_errorStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ /* DS Fast Path Error Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ StatisticsDef.dsErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsFast_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsFast_p,&dsFastError, (sizeof(DEV_HOST_errorStats_t)));
-+
-+ if (rc)
-+ return;
-+ if(!rc)
-+ {
-+ if(ptidsl->AppData.bState > 2)
-+ {
-+ /* Get CRC Errors Stats for both US and DS */
-+ ptidsl->AppData.dsICRC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.crcErrors);
-+ ptidsl->AppData.dsFCRC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.crcErrors);
-+ ptidsl->AppData.usICRC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.crcErrors);
-+ ptidsl->AppData.usFCRC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.crcErrors);
-+ /* Get FEC Errors Stats for both US and DS */
-+ ptidsl->AppData.dsIFEC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.fecErrors);
-+ ptidsl->AppData.dsFFEC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.fecErrors);
-+ ptidsl->AppData.usIFEC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.fecErrors);
-+ ptidsl->AppData.usFFEC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.fecErrors);
-+ /* Get NCD Errors Stats for both US and DS */
-+ ptidsl->AppData.dsINCD_error = dslhal_support_byteSwap32((unsigned int)dsIntlvError.ncdError);
-+ ptidsl->AppData.dsFNCD_error = dslhal_support_byteSwap32((unsigned int)dsFastError.ncdError);
-+ ptidsl->AppData.usINCD_error = dslhal_support_byteSwap32((unsigned int)usIntlvError.ncdError);
-+ ptidsl->AppData.usFNCD_error = dslhal_support_byteSwap32((unsigned int)usFastError.ncdError);
-+ /* Get LCD Errors Stats for both US and DS */
-+ ptidsl->AppData.dsILCD_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.lcdErrors);
-+ ptidsl->AppData.dsFLCD_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.lcdErrors);
-+ ptidsl->AppData.usILCD_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.lcdErrors);
-+ ptidsl->AppData.usFLCD_errors = dslhal_support_byteSwap32((unsigned int)usFastError.lcdErrors);
-+ /*Get HEC Errors Stats for both US and DS */
-+ ptidsl->AppData.dsIHEC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.hecErrors);
-+ ptidsl->AppData.dsFHEC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.hecErrors);
-+ ptidsl->AppData.usIHEC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.hecErrors);
-+ ptidsl->AppData.usFHEC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.hecErrors);
-+
-+ /* Get LOS and SEF error Stats */
-+ ptidsl->AppData.LOS_errors = dslhal_support_byteSwap32(StatisticsDef.losErrors);
-+ ptidsl->AppData.SEF_errors = dslhal_support_byteSwap32(StatisticsDef.sefErrors);
-+ ptidsl->AppData.coLosErrors = dslhal_support_byteSwap32(StatisticsDef.farEndLosErrors);
-+ ptidsl->AppData.coRdiErrors = dslhal_support_byteSwap32(StatisticsDef.farEndRdiErrors);
-+
-+ dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+
-+ /* Populate the US/DS ATM Stats Variables */
-+
-+ /* US ATM Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ atmStats.us0_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us0_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)atmStats.us0_p,&usAtmStats0, (sizeof(DEV_HOST_usAtmStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ atmStats.us1_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us1_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)atmStats.us1_p,&usAtmStats1, (sizeof(DEV_HOST_usAtmStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ /* DS ATM Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t)));
-+
-+ if (rc)
-+ return;
-+ atmStats.ds1_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds1_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)atmStats.ds1_p,&dsAtmStats1, (sizeof(DEV_HOST_dsAtmStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ /* Get ATM Stats for both US and DS for Channel 0*/
-+ ptidsl->AppData.usAtm_count[0] = dslhal_support_byteSwap32(usAtmStats0.goodCount);
-+ ptidsl->AppData.usIdle_count[0] = dslhal_support_byteSwap32(usAtmStats0.idleCount);
-+#if SWTC
-+ ptidsl->AppData.usPdu_count[0] = dslhal_support_byteSwap32(usAtmStats0.pduCount);
-+#endif
-+ ptidsl->AppData.dsGood_count[0] = dslhal_support_byteSwap32(dsAtmStats0.goodCount);
-+ ptidsl->AppData.dsIdle_count[0] = dslhal_support_byteSwap32(dsAtmStats0.idleCount);
-+#if SWTC
-+ ptidsl->AppData.dsPdu_count[0] = dslhal_support_byteSwap32(dsAtmStats0.pduCount);
-+#endif
-+ ptidsl->AppData.dsBadHec_count[0] = dslhal_support_byteSwap32((dsAtmStats0.badHecCount));
-+ ptidsl->AppData.dsOVFDrop_count[0] = dslhal_support_byteSwap32((dsAtmStats0.ovflwDropCount));
-+ /* Get ATM Stats for both US and DS for Channel 1*/
-+ ptidsl->AppData.usAtm_count[1] = dslhal_support_byteSwap32(usAtmStats1.goodCount);
-+ ptidsl->AppData.usIdle_count[1] = dslhal_support_byteSwap32(usAtmStats1.idleCount);
-+#if SWTC
-+ ptidsl->AppData.usPdu_count[1] = dslhal_support_byteSwap32(usAtmStats1.pduCount);
-+#endif
-+ ptidsl->AppData.dsGood_count[1] = dslhal_support_byteSwap32(dsAtmStats1.goodCount);
-+ ptidsl->AppData.dsIdle_count[1] = dslhal_support_byteSwap32(dsAtmStats1.idleCount);
-+#if SWTC
-+ ptidsl->AppData.dsPdu_count[1] = dslhal_support_byteSwap32(dsAtmStats1.pduCount);
-+#endif
-+ ptidsl->AppData.dsBadHec_count[1] = dslhal_support_byteSwap32((dsAtmStats1.badHecCount));
-+ ptidsl->AppData.dsOVFDrop_count[1] = dslhal_support_byteSwap32((dsAtmStats1.ovflwDropCount));
-+
-+ /* Determine the US and DS Superframe Count */
-+
-+ dspOamSharedInterface.dspWriteSuperFrameCnt_p = (DEV_HOST_dspWrSuperFrameCntDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteSuperFrameCnt_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteSuperFrameCnt_p,&SuperFrameCnt, sizeof(DEV_HOST_dspWrSuperFrameCntDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ ptidsl->AppData.usSuperFrmCnt = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntUstrm);
-+ ptidsl->AppData.dsSuperFrmCnt = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntDstrm);
-+
-+ /* Determine Frame Mode and Max Frame Mode */
-+
-+ dspOamSharedInterface.atucMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atucMsg_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atucMsg_p,&atuc_msg, sizeof(DEV_HOST_msg_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+
-+ ptidsl->AppData.FrmMode = (unsigned int)atuc_msg.framingMode;
-+ ptidsl->AppData.MaxFrmMode = (unsigned int)atuc_msg.maxFrameMode;
-+
-+ /* Determine Gross Gain */
-+
-+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ ptidsl->AppData.grossGain = (unsigned int)aturMsg.grossGain;
-+
-+ /* Determine DS Line Attenuation & Margin */
-+ dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,&eocVar, sizeof(DEV_HOST_eocVarDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ ptidsl->AppData.dsLineAttn = (unsigned int)eocVar.lineAtten;
-+ ptidsl->AppData.dsMargin = (unsigned int)eocVar.dsMargin;
-+ }
-+ }
-+
-+ /* Read in the Shared Tables structure */
-+ dspOamSharedInterface.dspWrSharedTables_p = (DEV_HOST_dspWrSharedTables_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWrSharedTables_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWrSharedTables_p,&sharedTables, sizeof(DEV_HOST_dspWrSharedTables_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+
-+ /* Read the ATU-R Bits and Gains Table */
-+ sharedTables.aturBng_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.aturBng_p);
-+ rc = dslhal_support_blockRead((PVOID)sharedTables.aturBng_p,ptidsl->AppData.rBng,255*2*sizeof(unsigned char));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ /* Read the ATU-C Bits and Gains Table */
-+ sharedTables.atucBng_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.atucBng_p);
-+ if(ptidsl->netService == 2) /* for Annex_B */
-+ {
-+ rc = dslhal_support_blockRead((PVOID)sharedTables.atucBng_p,ptidsl->AppData.cBng,126*sizeof(unsigned char));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ for(i=0;i<US_BNG_LENGTH*2;i++)
-+ usBits[i]=0;
-+ for(i=1;i<US_BNG_LENGTH*2;i++)
-+ {
-+ usBits[i]=((ptidsl->AppData.cBng[(i-1)*2])&0xf);
-+ dprintf(5,"Bit #%d : 0x%x\n",i,usBits[i]);
-+ }
-+ for(i=1;i<US_BNG_LENGTH*2;i++)
-+ {
-+ if(usBits[i])
-+ usNumLoadedTones++;
-+ }
-+ }
-+ else
-+ {
-+ rc = dslhal_support_blockRead((PVOID)sharedTables.atucBng_p,ptidsl->AppData.cBng,62*sizeof(unsigned char));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ for(i=0;i<US_BNG_LENGTH;i++)
-+ usBits[i]=0;
-+ for(i=1;i<US_BNG_LENGTH;i++)
-+ {
-+ usBits[i]=((ptidsl->AppData.cBng[(i-1)*2])&0xf);
-+ dprintf(5,"Bit #%d : 0x%x\n",i,usBits[i]);
-+ }
-+ for(i=1;i<US_BNG_LENGTH;i++)
-+ {
-+ if(usBits[i])
-+ usNumLoadedTones++;
-+ }
-+ }
-+
-+ /* Determine Number U/S of Loaded Tones */
-+
-+ /* U/S Power Computation */
-+ dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
-+ &phyPerf, sizeof(DEV_HOST_phyPerf_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ ptidsl->AppData.currentHybridNum = phyPerf.currentHybridNumUsed;
-+ phyPerf.usAvgGain = dslhal_support_byteSwap32(phyPerf.usAvgGain);
-+ ptidsl->AppData.usTxPower = LOG43125 + phyPerf.usAvgGain + (256*US_NOMINAL_POWER)+log10[usNumLoadedTones-1];
-+ dprintf(7,"Avg Gain: 0x%x usNumLoadedTones: 0x%x log: 0x%x\n",phyPerf.usAvgGain, usNumLoadedTones, log10[usNumLoadedTones-1]);
-+
-+ /* Determine Number D/S of Loaded Tones */
-+ dsBits[0]=0;
-+ for(i=0;i<DS_BNG_LENGTH;i++)
-+ {
-+ dsBits[i]=0;
-+ /* ptidsl->AppData.rBng[i-1]=dslhal_support_byteSwap32((unsigned int)ptidsl->AppData.rBng[i-1]);*/
-+ }
-+ for(i=1;i<DS_BNG_LENGTH;i++)
-+ {
-+ dsBits[i]=((ptidsl->AppData.rBng[(i-1)*2])&0xf);
-+ dprintf(5,"Bit #%d : 0x%x\n",i,dsBits[i]);
-+ }
-+ for(i=1;i<DS_BNG_LENGTH;i++)
-+ {
-+ if(dsBits[i])
-+ dsNumLoadedTones++;
-+ }
-+ /* D/S Power Computation */
-+ dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
-+ &phyPerf, sizeof(DEV_HOST_phyPerf_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ /* D/S Power Cutback */
-+ dsPowerCutBack = (unsigned char)((((ptidsl->AppData.bCMsgs1[0]) >>6) &0x3)+(((ptidsl->AppData.bCMsgs1[1]) &0x1) <<2));
-+ phyPerf.dsAvgGain = dslhal_support_byteSwap32(phyPerf.dsAvgGain);
-+ ptidsl->AppData.dsTxPower = LOG43125 + phyPerf.dsAvgGain + (256*((2*(dsPowerCutBack-1))-52)) + log10[dsNumLoadedTones-1];
-+ dprintf(7,"Avg Gain: %d dsNumLoadedTones: %d log: %d pcb: %d \n",phyPerf.dsAvgGain, dsNumLoadedTones, log10[dsNumLoadedTones-1], dsPowerCutBack);
-+ /* ds bit allocation */
-+ sharedTables.bitAllocTblDstrm_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.bitAllocTblDstrm_p);
-+ rc = dslhal_support_blockRead((PVOID)sharedTables.bitAllocTblDstrm_p,ptidsl->AppData.BitAllocTblDstrm, 256*sizeof(unsigned char));
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed \n");
-+ return;
-+ }
-+
-+ /* us bit allocation */
-+ sharedTables.bitAllocTblUstrm_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.bitAllocTblUstrm_p);
-+ rc = dslhal_support_blockRead((PVOID)sharedTables.bitAllocTblUstrm_p,ptidsl->AppData.BitAllocTblUstrm, 32*sizeof(unsigned char));
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed \n");
-+ return;
-+ }
-+ /* margin per tone */
-+ sharedTables.marginTblDstrm_p = (signed char *)dslhal_support_byteSwap32((unsigned int)sharedTables.marginTblDstrm_p);
-+ rc = dslhal_support_blockRead((PVOID)sharedTables.marginTblDstrm_p,ptidsl->AppData.marginTblDstrm, 256*sizeof(signed char));
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed \n");
-+ return;
-+ }
-+ /* Read Configured Options */
-+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.oamWriteNegoParams_p,
-+ &configParms, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ else
-+ {
-+ /* r-Msg1 */
-+ ptidsl->AppData.StdMode = (unsigned int)configParms.stdMode;
-+ if(configParms.stdMode == T1413_MODE)
-+ ptidsl->AppData.StdMode = DSLTRAIN_T1413_MODE;
-+ if(configParms.stdMode == GDMT_MODE)
-+ ptidsl->AppData.StdMode = DSLTRAIN_GDMT_MODE;
-+ if(configParms.stdMode == MULTI_MODE)
-+ ptidsl->AppData.StdMode = DSLTRAIN_MULTI_MODE;
-+
-+ shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs1, (void *)configParms.rMsgs1, 6*sizeof(char));
-+ if((ptidsl->AppData.bRMsgs1[2] & 0x02) == 0x02)
-+ {
-+ dprintf(7,"Trellis!\n");
-+ ptidsl->configFlag |= CONFIG_FLAG_TRELLIS;
-+ }
-+ else
-+ ptidsl->configFlag &= ~CONFIG_FLAG_TRELLIS;
-+ if(ptidsl->AppData.bRMsgs1[2]&0x01)
-+ ptidsl->configFlag |= CONFIG_FLAG_EC;
-+ else
-+ ptidsl->configFlag &= ~CONFIG_FLAG_EC;
-+ }
-+ return;
-+}
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_initStatistics()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: init statistical information of ax5 modem daugter card.
-+*
-+* Input: tidsl_t *ptidsl
-+*
-+* Return: NULL
-+*
-+********************************************************************************************/
-+void dslhal_api_initStatistics(tidsl_t * ptidsl)
-+{
-+ int rc;
-+ /*TCHostCommDef TCHostCommParms; */
-+ int optIdxU, optIdxD;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ DEV_HOST_dspWrNegoParaDef_t rateparms;
-+ DEV_HOST_modemStatsDef_t StatisticsDef;
-+ DEV_HOST_errorStats_t usIntlvError, usFastError, dsIntlvError, dsFastError;
-+ DEV_HOST_atmStats_t atmStats;
-+ DEV_HOST_usAtmStats_t usAtmStats0, usAtmStats1;
-+ DEV_HOST_dsAtmStats_t dsAtmStats0,dsAtmStats1;
-+ DEV_HOST_dspWrSuperFrameCntDef_t SuperFrameCnt;
-+ DEV_HOST_msg_t atuc_msg, aturMsg;
-+ DEV_HOST_eocVarDef_t eocVar;
-+
-+ dprintf(5, "dslhal_api_initStatistics\n");
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p,&rateparms, sizeof(DEV_HOST_dspWrNegoParaDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ if(!rc)
-+ {
-+ /* shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)rateparms.cRates1, SIZE_OF_CRATES1_TABLE); */
-+ ptidsl->AppData.bCRates2 = rateparms.cRates2;
-+ /* shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)rateparms.rRates1, 44); */
-+ ptidsl->AppData.bRRates2 = rateparms.rRates2;
-+ shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs1, (void *)rateparms.cMsgs1, 6);
-+ shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs2, (void *)rateparms.cMsgs2, 4);
-+ shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs2, (void *)rateparms.rMsgs2, 4);
-+
-+ ptidsl->AppData.atucVendorId = dslhal_support_byteSwap32((unsigned int)rateparms.atucVendorId);
-+ ptidsl->AppData.lineLength = (unsigned int)dslhal_support_byteSwap16((unsigned short)rateparms.lineLength);
-+ ptidsl->AppData.atucRevisionNum = rateparms.atucGhsRevisionNum;
-+ ptidsl->AppData.usLineAttn = (ptidsl->AppData.bCMsgs2[3] >>2)&0x003f;
-+ ptidsl->AppData.usMargin = (ptidsl->AppData.bCMsgs2[2])&0x001f;
-+
-+ /* Get the UpStream Connection Rate */
-+ /* Based on the Bit Pattern Get the Opt# */
-+ if((rateparms.cRates2 & 0x0f) == 0x01)
-+ optIdxU = 0;
-+ else if((rateparms.cRates2 & 0x0f) == 0x02)
-+ optIdxU = 1;
-+ else if((rateparms.cRates2 & 0x0f) == 0x04)
-+ optIdxU = 2;
-+ else if((rateparms.cRates2 & 0x0f) == 0x08)
-+ optIdxU = 3;
-+ else
-+ optIdxU = -1;
-+ dprintf(5, "optIdxU=%d\n", optIdxU);
-+ /* Obtain the US Rates using Opt# and CRates1 Table */
-+ /* Rate(US) = [Bf(LS0) + Bi(LS0)]*32 */
-+ if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
-+ ptidsl->AppData.USConRate = ((rateparms.cRates1[optIdxU][CRATES1_BF_LS0] + rateparms.cRates1[optIdxU][CRATES1_BI_LS0]) * 32);
-+ else
-+ ptidsl->AppData.USConRate = dslhal_support_byteSwap16((unsigned short)rateparms.adsl2USRate);
-+ ptidsl->AppData.USPeakCellRate = ptidsl->AppData.USConRate;
-+
-+ /* Get the DownStream Connection Rate */
-+ /* Based on the Bit Pattern Get the Opt# */
-+ if(((rateparms.cRates2 >> 4) & 0x0f) == 0x01)
-+ optIdxD = 0;
-+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x02)
-+ optIdxD = 1;
-+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x04)
-+ optIdxD = 2;
-+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x08)
-+ optIdxD = 3;
-+ else
-+ optIdxD = -1;
-+ /* Obtain the DS Rates using Opt# and CRates1 Table */
-+ /* Rate(DS) = [Bf(AS0) + Bi(AS0)]*32 */
-+ if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE)
-+ ptidsl->AppData.DSConRate = (((rateparms.cRates1[optIdxD][CRATES1_BF_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BF_DSRS]&0x80)<<1))+ (rateparms.cRates1[optIdxD][CRATES1_BI_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BI_DSRS]&0x80)<<1)))* 32);
-+ else
-+ ptidsl->AppData.DSConRate = dslhal_support_byteSwap16((unsigned short)rateparms.adsl2DSRate);
-+ dprintf(5, "ptidsl->AppData.wDSConRate=%d\n", ptidsl->AppData.DSConRate);
-+ /* Determine which Path has Modem Trained with */
-+ if((rateparms.cRates1[optIdxU][CRATES1_BF_LS0]) && (rateparms.cRates1[optIdxD][CRATES1_BF_AS0]))
-+ ptidsl->AppData.TrainedPath = FAST_PATH;
-+ else
-+ ptidsl->AppData.TrainedPath = INTERLEAVED_PATH;
-+
-+ /* Set the mode in which the modem is trained */
-+ ptidsl->AppData.TrainedMode = (unsigned int)rateparms.trainMode;
-+ if(rateparms.trainMode == T1413_MODE)
-+ ptidsl->AppData.TrainedMode = DSLTRAIN_T1413_MODE;
-+ if(rateparms.trainMode == GDMT_MODE)
-+ ptidsl->AppData.TrainedMode = DSLTRAIN_GDMT_MODE;
-+
-+ if(ptidsl->AppData.TrainedPath == FAST_PATH)
-+ ptidsl->AppData.dsFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_DSRS]&0x1f);
-+ else
-+ ptidsl->AppData.dsIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_DSRS]&0x1f);
-+ ptidsl->AppData.dsSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0x1f);
-+ ptidsl->AppData.dsInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_DSI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0xc0)<<2));
-+
-+ if(ptidsl->AppData.TrainedPath == FAST_PATH)
-+ ptidsl->AppData.usFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_USRS]&0x1f);
-+ else
-+ ptidsl->AppData.usIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_USRS]&0x1f);
-+ ptidsl->AppData.usSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0x1f);
-+ ptidsl->AppData.usInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_USI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0xc0)<<2));
-+ }
-+
-+ /* get the Statistics itself */
-+
-+ dspOamSharedInterface.modemStats_p = (DEV_HOST_modemStatsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStats_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemStats_p,&StatisticsDef, sizeof(DEV_HOST_modemStatsDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+
-+ /* Populate the Error Structure Variables */
-+
-+ /* US Interleave Path Error Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ StatisticsDef.usErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsIntlv_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsIntlv_p,&usIntlvError, (sizeof(DEV_HOST_errorStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ /* DS Interleave Path Error Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ StatisticsDef.dsErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsIntlv_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsIntlv_p,&dsIntlvError, (sizeof(DEV_HOST_errorStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ /* US Fast Path Error Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ StatisticsDef.usErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsFast_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsFast_p,&usFastError, (sizeof(DEV_HOST_errorStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+
-+ /* DS Fast Path Error Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ StatisticsDef.dsErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsFast_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsFast_p,&dsFastError, (sizeof(DEV_HOST_errorStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ if(ptidsl->AppData.bState > 2)
-+ {
-+ /* Get CRC Errors Stats for both US and DS */
-+ ptidsl->AppData.dsICRC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.crcErrors);
-+ ptidsl->AppData.dsFCRC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.crcErrors);
-+ ptidsl->AppData.usICRC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.crcErrors);
-+ ptidsl->AppData.usFCRC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.crcErrors);
-+ /* Get FEC Errors Stats for both US and DS */
-+ ptidsl->AppData.dsIFEC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.fecErrors);
-+ ptidsl->AppData.dsFFEC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.fecErrors);
-+ ptidsl->AppData.usIFEC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.fecErrors);
-+ ptidsl->AppData.usFFEC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.fecErrors);
-+ /* Get NCD Errors Stats for both US and DS */
-+ ptidsl->AppData.dsINCD_error = dslhal_support_byteSwap32((unsigned int)dsIntlvError.ncdError);
-+ ptidsl->AppData.dsFNCD_error = dslhal_support_byteSwap32((unsigned int)dsFastError.ncdError);
-+ ptidsl->AppData.usINCD_error = dslhal_support_byteSwap32((unsigned int)usIntlvError.ncdError);
-+ ptidsl->AppData.usFNCD_error = dslhal_support_byteSwap32((unsigned int)usFastError.ncdError);
-+ /* Get LCD Errors Stats for both US and DS */
-+ ptidsl->AppData.dsILCD_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.lcdErrors);
-+ ptidsl->AppData.dsFLCD_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.lcdErrors);
-+ ptidsl->AppData.usILCD_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.lcdErrors);
-+ ptidsl->AppData.usFLCD_errors = dslhal_support_byteSwap32((unsigned int)usFastError.lcdErrors);
-+ /*Get HEC Errors Stats for both US and DS */
-+ ptidsl->AppData.dsIHEC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.hecErrors);
-+ ptidsl->AppData.dsFHEC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.hecErrors);
-+ ptidsl->AppData.usIHEC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.hecErrors);
-+ ptidsl->AppData.usFHEC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.hecErrors);
-+
-+ /* Get LOS and SEF error Stats */
-+ ptidsl->AppData.LOS_errors = dslhal_support_byteSwap32(StatisticsDef.losErrors);
-+ ptidsl->AppData.SEF_errors = dslhal_support_byteSwap32(StatisticsDef.sefErrors);
-+ ptidsl->AppData.coLosErrors = dslhal_support_byteSwap32(StatisticsDef.farEndLosErrors);
-+ ptidsl->AppData.coRdiErrors = dslhal_support_byteSwap32(StatisticsDef.farEndRdiErrors);
-+
-+ dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+
-+ /* Populate the US/DS ATM Stats Variables */
-+
-+ /* US ATM Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ atmStats.us0_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us0_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)atmStats.us0_p,&usAtmStats0, (sizeof(DEV_HOST_usAtmStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ /* Change the endianness of the Pointer */
-+ atmStats.us1_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us1_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)atmStats.us1_p,&usAtmStats1, (sizeof(DEV_HOST_usAtmStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+
-+ /* DS ATM Statistics */
-+
-+ /* Change the endianness of the Pointer */
-+ atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t)));
-+
-+ if (rc)
-+ return;
-+
-+ /* Change the endianness of the Pointer */
-+ atmStats.ds1_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds1_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)atmStats.ds1_p,&dsAtmStats1, (sizeof(DEV_HOST_dsAtmStats_t)));
-+
-+ if (rc)
-+ return;
-+ /* Get ATM Stats for both US and DS Channel 0*/
-+ ptidsl->AppData.usAtm_count[0] = dslhal_support_byteSwap32(usAtmStats0.goodCount);
-+ ptidsl->AppData.usIdle_count[0] = dslhal_support_byteSwap32(usAtmStats0.idleCount);
-+#if SWTC
-+ ptidsl->AppData.usPdu_count[0] = dslhal_support_byteSwap32(usAtmStats0.pduCount);
-+#endif
-+ ptidsl->AppData.dsGood_count[0] = dslhal_support_byteSwap32(dsAtmStats0.goodCount);
-+ ptidsl->AppData.dsIdle_count[0] = dslhal_support_byteSwap32(dsAtmStats0.idleCount);
-+#if SWTC
-+ ptidsl->AppData.dsPdu_count[0] = dslhal_support_byteSwap32(dsAtmStats0.pduCount);
-+#endif
-+ ptidsl->AppData.dsBadHec_count[0] = dslhal_support_byteSwap32((dsAtmStats0.badHecCount));
-+ ptidsl->AppData.dsOVFDrop_count[0] = dslhal_support_byteSwap32((dsAtmStats0.ovflwDropCount));
-+
-+ /* Get ATM Stats for both US and DS Channel 1*/
-+ ptidsl->AppData.usAtm_count[1] = dslhal_support_byteSwap32(usAtmStats1.goodCount);
-+ ptidsl->AppData.usIdle_count[1] = dslhal_support_byteSwap32(usAtmStats1.idleCount);
-+#if SWTC
-+ ptidsl->AppData.usPdu_count[1] = dslhal_support_byteSwap32(usAtmStats1.pduCount);
-+#endif
-+ ptidsl->AppData.dsGood_count[1] = dslhal_support_byteSwap32(dsAtmStats1.goodCount);
-+ ptidsl->AppData.dsIdle_count[1] = dslhal_support_byteSwap32(dsAtmStats1.idleCount);
-+#if SWTC
-+ ptidsl->AppData.dsPdu_count[1] = dslhal_support_byteSwap32(dsAtmStats1.pduCount);
-+#endif
-+ ptidsl->AppData.dsBadHec_count[1] = dslhal_support_byteSwap32((dsAtmStats1.badHecCount));
-+ ptidsl->AppData.dsOVFDrop_count[1] = dslhal_support_byteSwap32((dsAtmStats1.ovflwDropCount));
-+
-+
-+ /* Determine the US and DS Superframe Count */
-+
-+ dspOamSharedInterface.dspWriteSuperFrameCnt_p = (DEV_HOST_dspWrSuperFrameCntDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteSuperFrameCnt_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteSuperFrameCnt_p,&SuperFrameCnt, sizeof(DEV_HOST_dspWrSuperFrameCntDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+
-+ ptidsl->AppData.usSuperFrmCnt = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntUstrm);
-+ ptidsl->AppData.dsSuperFrmCnt = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntDstrm);
-+
-+ /* Determine Frame Mode and Max Frame Mode */
-+
-+ dspOamSharedInterface.atucMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atucMsg_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atucMsg_p,&atuc_msg, sizeof(DEV_HOST_msg_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+
-+ ptidsl->AppData.FrmMode = (unsigned int)atuc_msg.framingMode;
-+ ptidsl->AppData.MaxFrmMode = (unsigned int)atuc_msg.maxFrameMode;
-+
-+ /* Determine Gross Gain */
-+
-+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+ ptidsl->AppData.grossGain = (unsigned int)aturMsg.grossGain;
-+ /* Determine DS Line Attenuation & Margin */
-+ dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,&eocVar, sizeof(DEV_HOST_eocVarDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return;
-+ }
-+
-+ ptidsl->AppData.dsLineAttn = (unsigned int)eocVar.lineAtten;
-+ ptidsl->AppData.dsMargin = (unsigned int)eocVar.dsMargin;
-+ }
-+
-+#if __HOST_FORINTERNALUSEONLY_R_H__
-+ ptidsl->AppData.BER = dslhal_INTERNAL_computeAtmBitErrorRate(ptidsl);
-+#endif
-+ dprintf(5, "initstatistics done\n");
-+ return;
-+ }
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_disableLosAlarm(tidsl_t *ptidsl,unsigned int set)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction enables/disables all the LOS alarms
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * unsigned int set; //if set is TRUE: LOS Alarms are disabled else enabled
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ * NOTES: Currently not supported in any version other than MR4 Patch release..
-+ *****************************************************************************************/
-+unsigned int dslhal_api_disableLosAlarm(tidsl_t *ptidsl,unsigned int set)
-+{
-+ DEV_HOST_oamWrNegoParaDef_t NegoPara;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+ dprintf(5," dslhal_api_setTrainingMode()\n");
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,
-+ sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+ rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ if(set)
-+ {
-+ NegoPara.disableLosAlarm = TRUE;
-+ /* NegoPara.marginMonitorTrning = TRUE;
-+ NegoPara.marginMonitorShwtme = TRUE;*/
-+ }
-+ else
-+ {
-+ NegoPara.disableLosAlarm = FALSE;
-+ /* NegoPara.marginMonitorTrning = FALSE;
-+ NegoPara.marginMonitorShwtme = FALSE;*/
-+ }
-+
-+ rc = dslhal_support_blockWrite(&NegoPara,(PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ dprintf(5," dslhal_api_disableLosAlarm() Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setMarginThreshold(tidsl_t *ptidsl,int threshold)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction does sets the Margin threshold
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * int threshold
-+ *
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setMarginThreshold(tidsl_t *ptidsl, int threshold)
-+{
-+ DEV_HOST_oamWrNegoParaDef_t NegoPara;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+
-+ dprintf(5," dslhal_ctrl_setThreshold()\n");
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+
-+ rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ NegoPara.marginThreshold = threshold;
-+
-+ rc = dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+
-+ if(rc)
-+ return DSLHAL_ERROR_MARGIN_API_FAILURE;
-+
-+ dprintf(5," dslhal_api_setThreshold() Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setMonitorFlags(tidsl_t *ptidsl, unsigned int trainflag,unsigned int shwtflag)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction does sets the Margin monitoring flag
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * unsigned int trainflag
-+ * unsigned int shwtflag
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setMarginMonitorFlags(tidsl_t *ptidsl,unsigned int trainflag,unsigned int shwtflag)
-+{
-+ DEV_HOST_oamWrNegoParaDef_t NegoPara;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+
-+ dprintf(5," dslhal_ctrl_setMonitorFlags()\n");
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+
-+ rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ if (trainflag)
-+ {
-+ NegoPara.marginMonitorTrning = TRUE;
-+ }
-+ else
-+ {
-+ NegoPara.marginMonitorTrning = FALSE;
-+ }
-+ if (shwtflag)
-+ {
-+ NegoPara.marginMonitorShwtme = TRUE;
-+ }
-+ else
-+ {
-+ NegoPara.marginMonitorShwtme = FALSE;
-+ }
-+
-+ rc = dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if(rc)
-+ return DSLHAL_ERROR_MARGIN_API_FAILURE;
-+ dprintf(5," dslhal_api_setMonitorFlags() Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNum)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction Sets the eoc Serial Number
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * char *SerialNum : Input eoc Serial Number
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNumber)
-+{
-+ DEV_HOST_eocVarDef_t eocVar;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+ dprintf(5," dslhal_api_setEocSerialNumber()\n");
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,
-+ &eocVar, sizeof(DEV_HOST_eocVarDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ shim_osMoveMemory(eocVar.serialNumber,SerialNumber,32);
-+
-+ rc= dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t));
-+ if(rc)
-+ return DSLHAL_ERROR_EOCREG_API_FAILURE;
-+ dprintf(5," dslhal_api_setEocSerialNumber() Done\n");
-+
-+ return DSLHAL_ERROR_NO_ERRORS;
-+
-+}
-+
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction Sets the eoc Vendor ID
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * char *VendorID : Input eoc Vendor ID
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID)
-+{
-+ DEV_HOST_oamWrNegoParaDef_t NegoPara;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+ dprintf(5," dslhal_api_setEocVendorId()\n");
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+
-+
-+ rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ shim_osMoveMemory(NegoPara.gdmtVendorId,VendorID,8);
-+ rc= dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if(rc)
-+ return DSLHAL_ERROR_EOCREG_API_FAILURE;
-+
-+ dprintf(5," dslhal_api_setEocVendorId() Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNum)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction Sets the eoc Revision Number
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * char *RevNum : Input eoc Revision Number
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNumber)
-+{
-+
-+ DEV_HOST_eocVarDef_t eocVar;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+ /*add for UR2 test */
-+ UINT8 selfTestResults[2];
-+ memset(selfTestResults,0x00,sizeof(selfTestResults));
-+ /* add for UR2 test */
-+ dprintf(5," dslhal_api_setEocRevisionNumber()\n");
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,
-+ &eocVar, sizeof(DEV_HOST_eocVarDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ shim_osMoveMemory(eocVar.revNumber,RevNumber,4);
-+ /* add for UR2 test */
-+ shim_osMoveMemory(eocVar.dummy,selfTestResults,2);
-+ /* add for UR2 test */
-+ rc=dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t));
-+ if(rc)
-+ return DSLHAL_ERROR_EOCREG_API_FAILURE;
-+ dprintf(5," dslhal_api_setEocRevisionNumber Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction Sets the eoc ATUR Config Register
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * char *ATURConfig : Input eoc ATUR Config Register
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig)
-+{
-+
-+ DEV_HOST_eocVarDef_t eocVar;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+ dprintf(5," dslhal_api_setAturConfig()\n");
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,
-+ &eocVar, sizeof(DEV_HOST_eocVarDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ shim_osMoveMemory(eocVar.aturConfig,ATURConfig,30);
-+ rc= dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t));
-+ if(rc)
-+ return DSLHAL_ERROR_EOCREG_API_FAILURE;
-+ dprintf(5," dslhal_api_setAturConfig() Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl,unsigned int flag)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Rate Adapt Enable Flag
-+*
-+* INPUT: PITIDSLHW_T *ptidsl
-+* unsigned int flag; //if flag = TRUE set rateadapt flag else reset it
-+* RETURN: 0 SUCCESS
-+* 1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl,unsigned int flag)
-+{
-+ DEV_HOST_msg_t aturMsg;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+ dprintf(5," dslhal_api_setRateAdaptFlag()\n");
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,
-+ &aturMsg, sizeof(DEV_HOST_msg_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ if(flag)
-+ aturMsg.rateAdapt = TRUE;
-+ else
-+ aturMsg.rateAdapt = FALSE;
-+
-+ rc= dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t));
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ dprintf(5," dslhal_api_setRateAdaptFlag() Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_setTrellisFlag(tidsl_t *ptidsl,unsigned int flag)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Trellis Coding Enable Flag
-+*
-+* INPUT: PITIDSLHW_T *ptidsl
-+* unsigned int flag; // if flag = TRUE, set trellis flag else reset
-+* RETURN: 0 SUCCESS
-+* 1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setTrellisFlag(tidsl_t *ptidsl,unsigned int flag)
-+{
-+
-+ DEV_HOST_msg_t aturMsg;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ DEV_HOST_oamWrNegoParaDef_t negoPara;
-+ int rc;
-+ dprintf(5," dslhal_api_setTrellisFlag()\n");
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+ rc += dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t));
-+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+ rc += dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&negoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ if(flag)
-+ {
-+ aturMsg.trellis = TRUE;
-+ negoPara.rMsgs1[2] |= 0x02;
-+ }
-+ else
-+ {
-+ aturMsg.trellis = FALSE;
-+ negoPara.rMsgs1[2] &= 0xFD;
-+ }
-+ rc=0;
-+ rc+=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t));
-+ rc+= dslhal_support_blockWrite(&negoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+
-+ dprintf(5," dslhal_api_setTrellisFlag() Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Maximum bits per carrier value
-+*
-+* INPUT: PITIDSLHW_T *ptidsl
-+* unsigned int maxbits : should be a value between 0-15
-+*
-+* RETURN: 0 SUCCESS
-+* 1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits)
-+{
-+
-+ DEV_HOST_msg_t aturMsg;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+
-+ dprintf(5," dslhal_api_setMaxBitsPerCarrier()\n");
-+ if(maxbits>15)
-+ {
-+ dprintf(3,"Maximum Number of Bits per carrier cannot exceed 15!\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,
-+ &aturMsg, sizeof(DEV_HOST_msg_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ aturMsg.maxBits = maxbits;
-+
-+ rc=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t));
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ dprintf(5," dslhal_api_setMaxBitsPerCarrier() Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Maximum Interleave Depth Supported
-+*
-+* INPUT: PITIDSLHW_T *ptidsl
-+* unsigned int maxdepth : Should be between 0 and 3 depending on intlv buffer
-+* size 64-512
-+* RETURN: 0 SUCCESS
-+* 1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth)
-+{
-+ DEV_HOST_msg_t aturMsg;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ int rc;
-+ dprintf(5," dslhal_api_setMaxInterleaverDepth()\n");
-+ if(maxdepth>3)
-+ {
-+ dprintf(3,"Invalid Value for maximum interleave depth (must be <3)\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,
-+ &aturMsg, sizeof(DEV_HOST_msg_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ aturMsg.maxIntlvDepth = maxdepth;
-+
-+ rc=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t));
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ dprintf(5," dslhal_api_setMaxInterleaverDepth() Done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_acknowledgeInterrupt()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_acknowledgeInterrupt(tidsl_t * ptidsl)
-+{
-+ unsigned int interruptSources=0;
-+ /* Clear out the DSLSS Interrupt Registers to acknowledge Interrupt */
-+ if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_MAILBOX_INTERRUPTS)
-+ {
-+ DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_MAILBOX_INTERRUPTS;
-+ dprintf(5,"Mailbox Interrupt \n");
-+ }
-+ if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_BITFIELD_INTERRUPTS)
-+ {
-+ DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_BITFIELD_INTERRUPTS;
-+ dprintf(5,"Bitfield Interrupt \n");
-+ }
-+ if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_HEARTBEAT_INTERRUPTS)
-+ {
-+ DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_HEARTBEAT_INTERRUPTS;
-+ dprintf(5,"HeartBeat Interrupt \n");
-+ }
-+ interruptSources = dslhal_support_parseInterruptSource(ptidsl);
-+ if(interruptSources < 0)
-+ return DSLHAL_ERROR_INTERRUPT_FAILURE;
-+ else
-+ return interruptSources;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_disableDspHybridSelect()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_disableDspHybridSelect(tidsl_t * ptidsl,unsigned int disable)
-+{
-+ int rc;
-+ DEV_HOST_phyPerf_t phyPerf;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
-+ &phyPerf, sizeof(DEV_HOST_phyPerf_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ if(disable==1)
-+ {
-+ phyPerf.disableDspHybridSelect_f = TRUE;
-+ // hybrid_selected = 888;
-+ }
-+ else
-+ {
-+ phyPerf.disableDspHybridSelect_f = FALSE;
-+ // hybrid_selected = 888;
-+ }
-+ rc=dslhal_support_blockWrite(&phyPerf,dspOamSharedInterface.phyPerf_p,sizeof(DEV_HOST_phyPerf_t));
-+ if(rc)
-+ return DSLHAL_ERROR_HYBRID_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_selectHybrid()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_selectHybrid(tidsl_t * ptidsl,unsigned int hybridNum)
-+{
-+ int rc;
-+ DEV_HOST_phyPerf_t phyPerf;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ if(hybridNum<1||hybridNum>4)
-+ {
-+ dprintf(3,"Invalid Value for Hybrid Number \n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
-+ &phyPerf, sizeof(DEV_HOST_phyPerf_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ phyPerf.hostSelectHybridNum = hybridNum;
-+ rc=dslhal_support_blockWrite(&phyPerf,dspOamSharedInterface.phyPerf_p,sizeof(DEV_HOST_phyPerf_t));
-+ if(rc)
-+ return DSLHAL_ERROR_HYBRID_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_reportHybridMetrics()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_reportHybridMetrics(tidsl_t * ptidsl,int *metric)
-+{
-+ int rc,i;
-+ DEV_HOST_phyPerf_t phyPerf;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ if(hybrid_selected>5)
-+ {
-+ dprintf(4,"Hybrid Metrics Not Yet Available \n");
-+ }
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return (0-DSLHAL_ERROR_INVALID_PARAM);
-+ }
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return (0-DSLHAL_ERROR_BLOCK_READ);
-+ }
-+
-+ dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p,
-+ &phyPerf, sizeof(DEV_HOST_phyPerf_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return (0-DSLHAL_ERROR_BLOCK_READ);
-+ }
-+ rc = sizeof(phyPerf.hybridCost);
-+ for(i=0;i<(rc/4);i++)
-+ {
-+ metric[i] = dslhal_support_byteSwap32(phyPerf.hybridCost[i]);
-+ }
-+ return hybrid_selected;
-+}
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl,unsigned int pairSelect)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction selects inner/outer pair on RJ11.
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl , unsigned int pairSelect
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl,unsigned int pairSelect)
-+{
-+ int rc;
-+
-+ dprintf(5, "dslhal_api_sendQuiet\n");
-+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_RJ11SELECT, (unsigned int)pairSelect, 0, 0);
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_api_sendQuiet failed\n");
-+ return DSLHAL_ERROR_CTRL_API_FAILURE;
-+ }
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction resets the failed state log stored
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl)
-+{
-+
-+ int rc;
-+ dprintf(5, "dslhal_api_resetTrainFailureLog \n");
-+ for(rc=0;rc<ptidsl->AppData.trainFails;rc++)
-+ {
-+ ptidsl->AppData.trainFailStates[rc]=0;
-+ }
-+ ptidsl->AppData.trainFails = 0;
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureLed()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureLed(tidsl_t * ptidsl,unsigned int idLed, unsigned int onOff)
-+{
-+ int rc;
-+ DEV_HOST_modemEnvPublic_t modemEnv;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ if(idLed>2 || onOff>2)
-+ {
-+ dprintf(3,"Invalid input parameter \n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p,
-+ &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ if(idLed==ID_DSL_LINK_LED)
-+ {
-+ modemEnv.overrideDslLinkLed_f = TRUE;
-+ if(onOff!=2)
-+ modemEnv.dslLinkLedState_f = onOff;
-+ }
-+ if(idLed==ID_DSL_ACT_LED)
-+ {
-+ modemEnv.overrideDslLinkLed_f = TRUE;
-+ if(onOff!=2)
-+ modemEnv.dslLinkLedState_f = onOff;
-+ }
-+ if(idLed==ID_RESTORE_DEFAULT_LED)
-+ {
-+ modemEnv.overrideDslLinkLed_f = FALSE;
-+ modemEnv.overrideDslActLed_f = FALSE;
-+ }
-+ rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t));
-+ if(rc)
-+ return DSLHAL_ERROR_MODEMENV_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureExternBert()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureExternBert(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal)
-+{
-+ int rc;
-+ DEV_HOST_modemEnvPublic_t modemEnv;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ if(configParm>1 || parmVal>1)
-+ {
-+ dprintf(3,"Invalid input parameter \n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p,
-+ &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ if(configParm==0)
-+ {
-+ modemEnv.externalBert = parmVal;
-+ }
-+ if(configParm==1)
-+ {
-+ modemEnv.usBertPattern = parmVal;
-+ }
-+ rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t));
-+ if(rc)
-+ return DSLHAL_ERROR_MODEMENV_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureAtmBert()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureAtmBert(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal)
-+{
-+ int rc;
-+ DEV_HOST_atmDsBert_t atmDsBert;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ if(configParm>1 || parmVal>1)
-+ {
-+ dprintf(3,"Invalid input parameter \n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.atmDsBert_p = (DEV_HOST_atmDsBert_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmDsBert_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmDsBert_p,
-+ &atmDsBert, sizeof(DEV_HOST_atmDsBert_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ if(configParm==0)
-+ {
-+ atmDsBert.atmBertFlag = parmVal;
-+ rc=dslhal_support_blockWrite(&atmDsBert,dspOamSharedInterface.atmDsBert_p,sizeof(DEV_HOST_atmDsBert_t));
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ }
-+ if(configParm==1)
-+ {
-+ ptidsl->AppData.atmBertBitCountLow = atmDsBert.bitCountLow;
-+ ptidsl->AppData.atmBertBitCountHigh = atmDsBert.bitCountHigh;
-+ ptidsl->AppData.atmBertBitErrorCountLow = atmDsBert.bitErrorCountLow;
-+ ptidsl->AppData.atmBertBitErrorCountHigh = atmDsBert.bitErrorCountHigh;
-+ }
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureDgaspLpr()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Configures dying gasp LPR signal
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureDgaspLpr(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal)
-+{
-+ int rc;
-+ DEV_HOST_modemEnvPublic_t modemEnv;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ if(configParm>1 || parmVal>1)
-+ {
-+ dprintf(3,"Invalid input parameter \n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ if(!ptidsl)
-+ {
-+ dprintf(3, "Error: PTIDSL pointer invalid\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p,
-+ &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ if(configParm==0)
-+ {
-+ modemEnv.dGaspLprIndicator_f = parmVal;
-+ }
-+ if(configParm==1)
-+ {
-+ modemEnv.overrideDspLprGasp_f = parmVal;
-+ }
-+ rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t));
-+ if(rc)
-+ return DSLHAL_ERROR_MODEMENV_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_genericDspRead()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Reads from a Generic Location in the DSP Host Interface
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_genericDspRead(tidsl_t * ptidsl,unsigned int offset1, unsigned int offset2,
-+ unsigned int offset3, unsigned char *localBuffer, unsigned int numBytes)
-+{
-+ int rc=0;
-+ unsigned int hostIfLoc,structLoc,elementLoc;
-+ hostIfLoc = (unsigned int)ptidsl->pmainAddr;
-+ if(numBytes<=0 || !localBuffer || !ptidsl)
-+ {
-+ dprintf(3,"Invalid input parameter \n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ rc += dslhal_support_blockRead((PVOID)(hostIfLoc+sizeof(int)*offset1), &structLoc,sizeof(int));
-+ structLoc = dslhal_support_byteSwap32(structLoc);
-+ rc += dslhal_support_blockRead((PVOID)(structLoc+sizeof(int)*offset2), &elementLoc,sizeof(int));
-+ elementLoc = dslhal_support_byteSwap32(elementLoc);
-+ dprintf(3,"Host IF Location: 0x%x Struct1 Location: 0x%x Element Location: 0x%x \n",hostIfLoc, structLoc, elementLoc);
-+ rc += dslhal_support_blockRead((PVOID)(elementLoc+(offset3*4)), localBuffer,numBytes);
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_genericDspWrite()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Writes to a Generic Location in the DSP Host Interface
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_genericDspWrite(tidsl_t * ptidsl,unsigned int offset1, unsigned int offset2,
-+ unsigned int offset3, unsigned char *localBuffer, unsigned int numBytes)
-+{
-+
-+ int rc=0;
-+ unsigned int hostIfLoc,structLoc,elementLoc;
-+ hostIfLoc = (unsigned int)ptidsl->pmainAddr;
-+ if(numBytes<=0 || !localBuffer || !ptidsl)
-+ {
-+ dprintf(3,"Invalid input parameter \n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ rc += dslhal_support_blockRead((PVOID)(hostIfLoc+(offset1*4)), &structLoc,4);
-+ structLoc = dslhal_support_byteSwap32(structLoc);
-+ rc += dslhal_support_blockRead((PVOID)(structLoc+(offset2*4)), &elementLoc,4);
-+ elementLoc = dslhal_support_byteSwap32(elementLoc);
-+ dprintf(3,"Host IF Location: 0x%x Struct1 Location: 0x%x Element Location: 0x%x \n",hostIfLoc, structLoc, elementLoc);
-+ rc += dslhal_support_blockWrite(localBuffer,(PVOID)(elementLoc+(offset3*4)),numBytes);
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_dspInterfaceRead()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Reads from a Generic Location in the DSP Host Interface
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_dspInterfaceRead(tidsl_t * ptidsl,unsigned int baseAddr, unsigned int numOffsets,
-+ unsigned int *offsets, unsigned char *localBuffer, unsigned int numBytes)
-+{
-+ int rc=0, off=0;
-+ unsigned int prevAddr,currAddr;
-+ prevAddr = baseAddr;
-+ if(numBytes<=0 || !localBuffer || !ptidsl || !offsets)
-+ {
-+ dprintf(3,"Invalid input parameter \n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ for(off=0;off<numOffsets-1;off++)
-+ {
-+ rc += dslhal_support_blockRead((PVOID)(prevAddr+(4*offsets[off])), &currAddr,4);
-+ currAddr = dslhal_support_byteSwap32(currAddr);
-+ prevAddr = currAddr;
-+ dprintf(5,"Curr Addr = 0x%x Current Level: %d \n",currAddr,off);
-+ }
-+ currAddr = currAddr + offsets[numOffsets-1]*4;
-+ rc += dslhal_support_blockRead((PVOID)(currAddr),localBuffer,numBytes);
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_dspInterfaceWrite()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Writes to a Generic Location in the DSP Host Interface
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_dspInterfaceWrite(tidsl_t * ptidsl,unsigned int baseAddr, unsigned int numOffsets,
-+ unsigned int *offsets,unsigned char *localBuffer, unsigned int numBytes)
-+{
-+
-+ int rc=0, off=0;
-+ unsigned int prevAddr,currAddr;
-+ prevAddr = baseAddr;
-+ if(numBytes<=0 || !localBuffer || !ptidsl || !offsets)
-+ {
-+ dprintf(3,"Invalid input parameter \n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+ for(off=0;off<numOffsets-1;off++)
-+ {
-+ rc += dslhal_support_blockRead((PVOID)(prevAddr+(4*offsets[off])), &currAddr,4);
-+ currAddr = dslhal_support_byteSwap32(currAddr);
-+ prevAddr = currAddr;
-+ dprintf(5,"Curr Addr = 0x%x Current Level: %d \n",currAddr,off);
-+ }
-+ currAddr = currAddr + offsets[numOffsets-1]*4;
-+ rc += dslhal_support_blockWrite(localBuffer,(PVOID)(currAddr),numBytes);
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the passed mailbox command to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * unsigned int cmd
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+/* Function is commented out for now since, its not tested */
-+ /*unsigned int dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd)
-+{
-+ int rc;
-+
-+ dprintf(5, "dslhal_api_sendMailboxCommand\n");
-+ rc = dslhal_support_writeHostMailbox(ptidsl, cmd, 0, 0, 0);
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_api_sendMailboxCommand failed\n");
-+ return DSLHAL_ERROR_CTRL_API_FAILURE;
-+ }
-+ return DSLHAL_ERROR_NO_ERRORS;
-+} */
-+
-+
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_api.h linux.dev/drivers/atm/sangam_atm/dsl_hal_api.h
---- linux.old/drivers/atm/sangam_atm/dsl_hal_api.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_api.h 2005-08-23 04:46:50.097843696 +0200
-@@ -0,0 +1,1721 @@
-+#ifndef __DSL_HAL_API_H__
-+#define __DSL_HAL_API_H__ 1
-+/*******************************************************************************
-+* FILE PURPOSE: DSL HAL to Application Interface for Sangam
-+*
-+********************************************************************************
-+* FILE NAME: dsl_application_interface.h
-+*
-+* DESCRIPTION:
-+* DSL-Application Interface Structures
-+*
-+*
-+* By: Ramakrishnan Parasuraman
-+*
-+* (C) Copyright 2003, Texas Instruments, Inc.
-+* History
-+* Data Version By Notes
-+* 06Feb03 0.00 RamP Initial Version Written
-+* 07Apr03 0.01 RamP Commented out typedefs
-+* 09Apr03 0.02 RamP Added deviceContext and extended
-+* dspVer to include bugfixes
-+* 14Apr03 0.03 RamP Added stateTransition to structure
-+* 16Apr03 0.04 RamP Removed typedefs; changed dspVer
-+* 22Apr03 0.05 RamP Moved acknowledgeInterrupt from
-+* (alpha) support module into this
-+* 24Apr03 0.06 RamP Moved the RSTATE enum from register
-+*
-+* 28Apr03 0.07 RamP Added additional parameter to the
-+* (alpha +) handleInterrupt function for intrSrc
-+* 14May03 0.08 RamP Added hybrid switching APIs
-+* (alpha ++) Added statistics fields in AppData
-+* Added netService identifier
-+* 20May03 0.09 RamP Added Inner/Outer pair API support.
-+* Added dying gasp message.
-+* 29May03 0.10 RamP Added coProfile structure
-+* 04Jun03 0.11 RamP Added margin per tone statistics,
-+* Added timing counters, added train
-+* failure functions,added config flags
-+* 06Jun03 0.12 RamP Added LED, STM Bert, dGasp LPR
-+* config API functions
-+* 09Jun03 0.13 RamP Added ATM Bert function, CO stats
-+* Moved stateTransition to ITIDSLHW
-+* (Beta) Moved configFlag to ITIDSLHW,
-+* Cleaned up fifoInfo structure
-+* Added US/DS R/S FEC parameters
-+* 21Aug03 0.14 RamP Added g.hs message buffer, us/ds
-+* bits n gains table, negoMsgs struct
-+* (act) bitswap stucts/indices, trainstate,
-+* Added functions for advanced config
-+* Added gross gain and line length
-+* 29Sep03 0.15 RamP Added tokens for advanced config
-+* module api functions
-+* 12Oct03 0.16 RamP Added adsl2Msgs structure with worst
-+* case size for variable length msgs
-+* Added API function prototypes
-+* 21Oct03 0.17 RamP Added typedef for current modem
-+* user settings
-+* 28Oct03 0.18 RamP Added function to config blackout
-+* bitmap in the RMSGPCB message
-+* 20Nov03 0.19 RamP Added functions for generic and
-+* host interface read - write
-+* 24Nov03 0.20 RamP Added enum for detailed state track
-+* Added element for state bit fields
-+* Addded rState for encoded main state
-+* Added blackout valid flag
-+* 26Dec03 0.21 RamP Added defines for oamFeature masks
-+* 30Dec03 0.22 RamP Increased sizes for cMsgPcb,RMsgPcb
-+* to incorporate DELT mode messages
-+* 30Dec03 0.23 RamP Added generic mailbox command fxn
-+*******************************************************************************/
-+
-+#ifdef INTERNAL_BUILD
-+#include <dsl_hal_api_pvt.h>
-+#endif
-+
-+#define NUM_PAGES 4
-+#define OAMFEATURE_AUTORETRAIN_MASK 0x00000001
-+#define OAMFEATURE_TC_SYNC_DETECT_MASK 0x00000002
-+#define OAMFEATURE_EOCAOC_INTERRUPT_MASK 0x00000004
-+#define OAMFEATURE_CONS_DISP_DISABLE_MASK 0x00000008
-+#define OAMFEATURE_GHSMSG_INTERRUPT_MASK 0x00000010
-+
-+typedef struct tagTIOIDINFO
-+{
-+ unsigned int bState; /* addr->bDSPATURState */
-+ unsigned int USConRate; /* US Conection Rates */
-+ unsigned int DSConRate; /* DS Connection Rates */
-+ unsigned int USPayload; /* ennic_tx_pullup*/
-+ unsigned int DSPayload; /* ennic_indicate_receive_packet*/
-+ unsigned int FrmMode; /* addr->atur_msg.framing_mode*/
-+ unsigned int MaxFrmMode;
-+ unsigned int TrainedPath; /* Status of the Modem in which trained (Fast or Interleaved Path) */
-+ unsigned int TrainedMode; /* Status of the mode in which the modem is trained (G.dmt, T1.413, etc) */
-+
-+ /* Superframe Count */
-+ unsigned int usSuperFrmCnt; /* Num of US Superframes */
-+ unsigned int dsSuperFrmCnt; /* Num of DS Superframes */
-+
-+ /* LOS & SEF Stats */
-+ unsigned int LOS_errors; /* Num of ADSL frames where loss-of-sync */
-+ unsigned int SEF_errors; /* Num of severly errored ADSL frames - LOS > MAXBADSYNC ADSL frames */
-+ unsigned int coLosErrors; /* CO LOS Defects */
-+ unsigned int coRdiErrors; /* CO RDI defects */
-+ /* CRC Stats */
-+ unsigned int usICRC_errors; /* Num of Upstream CRC errored ADSL frames on Interleaved Path */
-+ unsigned int usFCRC_errors; /* Num of Upstream CRC errored ADSL frames on Fast Path */
-+ unsigned int dsICRC_errors; /* Num of Downstream CRC errored ADSL frames on Interleaved Path */
-+ unsigned int dsFCRC_errors; /* Num of Downstream CRC errored ADSL frames on Fast Path */
-+
-+ /* FEC Stats */
-+ unsigned int usIFEC_errors; /* Num of Upstream FEC errored (corrected) ADSL frames on Interleaved Path */
-+ unsigned int usFFEC_errors; /* Num of Upstream FEC errored (corrected) ADSL frames on Fast Path */
-+ unsigned int dsIFEC_errors; /* Num of Downstream FEC errored (corrected) ADSL frames on Interleaved Path */
-+ unsigned int dsFFEC_errors; /* Num of Downstream FEC errored (corrected) ADSL frames on Fast Path */
-+
-+ /* NCD Stats */
-+ unsigned int usINCD_error; /* UpStream No Cell Delineation on Interleaved Path */
-+ unsigned int usFNCD_error; /* UpStream No Cell Delineation on Fast Path */
-+ unsigned int dsINCD_error; /* Downstream No Cell Delineation on Interleaved Path */
-+ unsigned int dsFNCD_error; /* Downstream No Cell Delineation on Fast Path */
-+
-+ /* LCD Stats */
-+ unsigned int usILCD_errors; /* UpStream Loss of Cell Delineation (within the same connection) on Interleaved Path */
-+ unsigned int usFLCD_errors; /* UpStream Loss of Cell Delineation (within the same connection) on Fast Path */
-+ unsigned int dsILCD_errors; /* Downstream Loss of Cell Delineation (within the same connection) on Interleaved Path */
-+ unsigned int dsFLCD_errors; /* Downstream Loss of Cell Delineation (within the same connection) on Fast Path */
-+
-+ /* HEC Stats */
-+ unsigned int usIHEC_errors; /* Num of Upstream HEC errored ADSL frames on Interleaved Path */
-+ unsigned int usFHEC_errors; /* Num of Upstream HEC errored ADSL frames on Fast Path */
-+ unsigned int dsIHEC_errors; /* Num of Downstream HEC errored ADSL frames on Interleaved Path */
-+ unsigned int dsFHEC_errors; /* Num of Downstream HEC errored ADSL frames on Fast Path */
-+
-+ /* Upstream ATM Stats */
-+ unsigned int usAtm_count[2]; /* Upstream Good Cell Count */
-+ unsigned int usIdle_count[2]; /* Upstream Idle Cell Count */
-+ unsigned int usPdu_count[2]; /* UpStream PDU Count */
-+
-+ /* Downstream ATM Stats */
-+ unsigned int dsGood_count[2]; /* Downstream Good Cell Count */
-+ unsigned int dsIdle_count[2]; /* Downstream Idle Cell Count */
-+ unsigned int dsBadHec_count[2]; /* Downstream Bad Hec Cell Count */
-+ unsigned int dsOVFDrop_count[2]; /* Downstream Overflow Dropped Cell Count */
-+ unsigned int dsPdu_count[2]; /* Downstream PDU Count */
-+ /* (only looks for end of pdu on good atm cells received, */
-+ /* not on Bad_Hec or Overflow cell) */
-+
-+ unsigned int dsLineAttn; /* DS Line Attenuation */
-+ unsigned int dsMargin; /* Measured DS MArgin */
-+
-+ unsigned int usLineAttn;
-+ unsigned int usMargin;
-+
-+ unsigned char bCMsgs1[6];
-+ unsigned char bRMsgs1[6];
-+ unsigned char bCRates2;
-+ unsigned char bRRates2;
-+ unsigned char bRRates1[4][11];
-+ unsigned char bCMsgs2[4];
-+ unsigned char bCRates1[4][30];
-+ unsigned char bRMsgs2[4];
-+
-+ unsigned int USPeakCellRate;
-+
-+ unsigned int dsl_status;
-+ unsigned int dsl_modulation;
-+ unsigned char dsl_ghsRxBuf[10][64];
-+ unsigned char dsl_GHS_msg_type[2];
-+
-+ int TxVCs[12];
-+ int RxVCs[12];
-+
-+ unsigned int vci_vpi_val;
-+
-+ unsigned char BitAllocTblDstrm[256];
-+ unsigned char BitAllocTblUstrm[32];
-+ signed char marginTblDstrm[256];
-+ unsigned char rBng[512];
-+ unsigned char cBng[126];
-+ int usTxPower;
-+ int dsTxPower;
-+ short rxSnrPerBin0[256];
-+ short rxSnrPerBin1[256];
-+ short rxSnrPerBin2[256];
-+
-+ unsigned int StdMode;
-+ unsigned int atucVendorId;
-+ unsigned char currentHybridNum;
-+ unsigned char atucRevisionNum;
-+ unsigned int trainFails;
-+ unsigned int trainFailStates[30];
-+ unsigned int idleTick;
-+ unsigned int initTick;
-+ unsigned int showtimeTick;
-+ unsigned char dsFastParityBytesPerSymbol;
-+ unsigned char dsIntlvParityBytesPerSymbol;
-+ unsigned char dsSymbolsPerCodeWord;
-+ unsigned int dsInterleaverDepth;
-+ unsigned char usFastParityBytesPerSymbol;
-+ unsigned char usIntlvParityBytesPerSymbol;
-+ unsigned char usSymbolsPerCodeWord;
-+ unsigned int usInterleaverDepth;
-+ unsigned int atmBertBitCountLow;
-+ unsigned int atmBertBitCountHigh;
-+ unsigned int atmBertBitErrorCountLow;
-+ unsigned int atmBertBitErrorCountHigh;
-+ unsigned int lineLength;
-+ unsigned int grossGain;
-+ int rxNoisePower0[256];
-+ int rxNoisePower1[256];
-+}TIOIDINFO,*PTIOIDINFO;
-+
-+typedef struct{
-+ unsigned char bCMsgs1[6];
-+ unsigned char bCRates2;
-+ unsigned char bRRates2;
-+ unsigned char bRRates1[4][11];
-+ unsigned char bCMsgs2[4];
-+ unsigned char bCRates1[4][30];
-+ unsigned char bCRatesRA[4][30];
-+ unsigned char bRMsgs2[4];
-+ unsigned char bRRatesRA[4];
-+ unsigned char bRMsgsRA[12];
-+ unsigned char bCMsgsRA[6];
-+}negoMsgs;
-+
-+typedef struct{
-+ unsigned char cMsgFmt[2];
-+ unsigned char rMsgFmt[2];
-+ unsigned char cMsgPcb[12];
-+ unsigned char rMsgPcb[70];
-+ unsigned char dummy1[2];
-+ unsigned char cMsg1[40];
-+ unsigned char rMsg1[4];
-+ unsigned char cMsg2[8];
-+ unsigned char rMsg2[64];
-+ unsigned char cParams[264];
-+ unsigned char rParams[2088];
-+ unsigned short cMsgPcbLen;
-+ unsigned short rMsgPcbLen;
-+ unsigned short cMsg1Len;
-+ unsigned short rMsg1Len;
-+ unsigned short cMsg2Len;
-+ unsigned short rMsg2Len;
-+ unsigned short cParamsLen;
-+ unsigned short rParamsLen;
-+}adsl2Msgs;
-+
-+typedef struct{
-+ unsigned char rMsg1Ld[16];
-+ unsigned char rMsg2Ld[260];
-+ unsigned char rMsg3Ld[260];
-+ unsigned char rMsg4Ld[260];
-+ unsigned char rMsg5Ld[260];
-+ unsigned char rMsg6Ld[260];
-+ unsigned char rMsg7Ld[260];
-+ unsigned char rMsg8Ld[260];
-+ unsigned char rMsg9Ld[260];
-+ unsigned char cMsg1Ld[16];
-+ unsigned char cMsg2Ld[260];
-+ unsigned char cMsg3Ld[132];
-+ unsigned char cMsg4Ld[68];
-+ unsigned char cMsg5Ld[68];
-+ unsigned short rMsg1LdLen;
-+ unsigned short rMsgxLdLen;
-+ unsigned short cMsg1LdLen;
-+ unsigned short cMsg2LdLen;
-+ unsigned short cMsg3LdLen;
-+ unsigned short cMsg4LdLen;
-+ unsigned short cMsg5LdLen;
-+ unsigned short dummy8;
-+}adsl2DeltMsgs;
-+
-+typedef struct{
-+ unsigned char trellisFlag;
-+ unsigned char rateAdaptFlag;
-+ unsigned char marginMonitorTraining;
-+ unsigned char marginMonitorShowtime;
-+ signed char marginThreshold;
-+ unsigned char disableLosFlag;
-+ unsigned char aturConfig[30];
-+ unsigned char eocVendorId[8];
-+ unsigned char eocSerialNumber[32];
-+ unsigned char eocRevisionNumber[4];
-+}currentPhySettings;
-+
-+
-+typedef struct
-+{
-+ unsigned int PmemStartWtAddr; /* source address in host memory */
-+ unsigned int OverlayXferCount; /* number of 32bit words to be transfered */
-+ unsigned int BinAddr; /* destination address in dsp's pmem */
-+ unsigned int overlayHostAddr;
-+ unsigned int olayPageCrc32;
-+ unsigned int SecOffset;
-+} OlayDP_Def;
-+
-+typedef struct
-+{
-+ unsigned int timeStamp; /* TimeStp revision */
-+ unsigned char major; /* Major revision */
-+ unsigned char minor; /* Minor revision */
-+ unsigned char bugFix; /* BugFix revision */
-+ unsigned char buildNum; /* BuildNum revision */
-+ unsigned char reserved; /* for future use */
-+}dspVer;
-+
-+typedef struct{
-+ unsigned char major;
-+ unsigned char minor;
-+ unsigned char bugfix;
-+ unsigned char buildNum;
-+ unsigned int timeStamp;
-+}dslVer;
-+
-+typedef struct{
-+ unsigned char bitSwapCommand[6];
-+ unsigned char bitSwapBinNum[6];
-+ unsigned char bitSwapSFrmCnt;
-+}dslBitSwapDef;
-+
-+typedef struct{
-+ unsigned int aturState;
-+ unsigned int subStateIndex;
-+ unsigned int timeStamp;
-+}trainStateInfo;
-+
-+typedef struct{
-+ unsigned char ctrlBits;
-+ unsigned char infoBits;
-+}eocMessageDef;
-+
-+enum
-+{
-+ RSTATE_TEST,
-+ RSTATE_IDLE,
-+ RSTATE_INIT,
-+ RSTATE_HS,
-+ RSTATE_RTDL,
-+ RSTATE_SHOWTIME,
-+};
-+
-+typedef enum
-+{
-+ ATU_RZERO1 = 100,
-+ ATU_RTEST = 101,
-+ ATU_RIDLE = 102,
-+ ATU_RINIT = 103,
-+ ATU_RRESET = 104,
-+ GDMT_NSFLR = 105,
-+ GDMT_TONE = 106,
-+ GDMT_SILENT = 107,
-+ GDMT_NEGO = 108,
-+ GDMT_FAIL = 109,
-+ GDMT_ACKX = 110,
-+ GDMT_QUIET2 = 111,
-+ ATU_RZERO2 = 200,
-+ T1413_NSFLR = 201,
-+ T1413_ACTREQ = 202,
-+ T1413_ACTMON = 203,
-+ T1413_FAIL = 204,
-+ T1413_ACKX = 205,
-+ T1413_QUIET2 = 206,
-+ ATU_RQUIET2 = 207,
-+ ATU_RREVERB1 = 208,
-+ ATU_RQUIET3 = 209,
-+ ATU_RECT = 210,
-+ ATU_RREVERB2 = 211,
-+ ATU_RSEGUE1 = 212,
-+ ATU_RREVERB3 = 213,
-+ ATU_RSEGUE2 = 214,
-+ ATU_RRATES1 = 215,
-+ ATU_RMSGS1 = 216,
-+ ATU_RMEDLEY = 217,
-+ ATU_RREVERB4 = 218,
-+ ATU_RSEGUE3 = 219,
-+ ATU_RMSGSRA = 220,
-+ ATU_RRATESRA = 221,
-+ ATU_RREVERBRA = 222,
-+ ATU_RSEGUERA = 223,
-+ ATU_RMSGS2 = 224,
-+ ATU_RRATES2 = 225,
-+ ATU_RREVERB5 = 226,
-+ ATU_RSEGUE4 = 227,
-+ ATU_RBNG = 228,
-+ ATU_RREVERB6 = 229,
-+ ATU_RSHOWTIME = 230,
-+ ATU_RZERO3 = 300,
-+ ADSL2_QUIET1 = 301,
-+ ADSL2_COMB1 = 302,
-+ ADSL2_QUIET2 = 303,
-+ ADSL2_COMB2 = 304,
-+ ADSL2_ICOMB1 = 305,
-+ ADSL2_LINEPROBE = 306,
-+ ADSL2_QUIET3 = 307,
-+ ADSL2_COMB3 = 308,
-+ ADSL2_ICOMB2 = 309,
-+ ADSL2_RMSGFMT = 310,
-+ ADSL2_RMSGPCB = 311,
-+ ADSL2_REVERB1 = 312,
-+ ADSL2_QUIET4 = 313,
-+ ADSL2_REVERB2 = 314,
-+ ADSL2_QUIET5 = 315,
-+ ADSL2_REVERB3 = 316,
-+ ADSL2_ECT = 317,
-+ ADSL2_REVERB4 = 318,
-+ ADSL2_SEGUE1 = 319,
-+ ADSL2_REVERB5 = 320,
-+ ADSL2_SEGUE2 = 321,
-+ ADSL2_RMSG1 = 322,
-+ ADSL2_MEDLEY = 323,
-+ ADSL2_EXCHANGE = 324,
-+ ADSL2_RMSG2 = 325,
-+ ADSL2_REVERB6 = 326,
-+ ADSL2_SEGUE3 = 327,
-+ ADSL2_RPARAMS = 328,
-+ ADSL2_REVERB7 = 329,
-+ ADSL2_SEGUE4 = 330,
-+ ATU_RZERO4 = 400,
-+ DELT_SEGUE1 = 401,
-+ DELT_REVERB5 = 402,
-+ DELT_SEGUE2 = 403,
-+ DELT_EXCHANGE = 404,
-+ DELT_SEGUELD = 405,
-+ DELT_RMSGLD = 406,
-+ DELT_QUIET1LD = 407,
-+ DELT_QUIET2LD = 408,
-+ DELT_RACK1 = 409,
-+ DELT_RNACK1 = 410,
-+ DELT_QUIETLAST = 411
-+} modemStates_t;
-+
-+enum
-+{
-+ DSLTRAIN_NO_MODE,
-+ DSLTRAIN_MULTI_MODE,
-+ DSLTRAIN_T1413_MODE,
-+ DSLTRAIN_GDMT_MODE,
-+ DSLTRAIN_GLITE_MODE
-+};
-+
-+enum
-+{
-+ ID_RESTORE_DEFAULT_LED,
-+ ID_DSL_LINK_LED,
-+ ID_DSL_ACT_LED
-+};
-+
-+typedef struct _ITIDSLHW
-+{
-+ /* struct _TIDSL_IHwVtbl * pVtbl; */
-+ unsigned char* fwimage;
-+ void* pmainAddr;
-+ void* pOsContext;
-+ unsigned int ReferenceCount;
-+ unsigned int netService;
-+
-+ int InitFlag;
-+
-+ int imagesize;
-+
-+ unsigned int lConnected;
-+ unsigned int bStatisticsInitialized;
-+ unsigned int rState;
-+ unsigned int bShutdown;
-+ unsigned int blackOutValid_f;
-+ unsigned char blackOutBits[64];
-+ unsigned int bAutoRetrain;
-+ volatile unsigned int bOverlayPageLoaded;
-+ unsigned int stateTransition;
-+ unsigned int configFlag;
-+ unsigned int dsBitSwapInx;
-+ unsigned int usBitSwapInx;
-+ unsigned int trainStateInx;
-+ unsigned int usEocMsgInx;
-+ unsigned int dsEocMsgInx;
-+ unsigned int reasonForDrop;
-+ TIOIDINFO AppData;
-+ dspVer dspVer;
-+
-+ OlayDP_Def olayDpPage[NUM_PAGES];
-+ OlayDP_Def coProfiles;
-+ OlayDP_Def constDisplay;
-+ dslBitSwapDef dsBitSwap[30];
-+ dslBitSwapDef usBitSwap[30];
-+ trainStateInfo trainHistory[120];
-+ eocMessageDef usEocMsgBuf[30];
-+ eocMessageDef dsEocMsgBuf[30];
-+ adsl2Msgs adsl2TrainingMessages;
-+ adsl2DeltMsgs adsl2DiagnosticMessages;
-+ unsigned int modemStateBitField[4];
-+#ifdef INTERNAL_BUILD
-+ internalParameters internalVars;
-+#endif
-+} ITIDSLHW_T, *PITIDSLHW_T, tidsl_t;
-+
-+
-+/**********************************************************************************
-+* API proto type defines
-+**********************************************************************************/
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_dslStartup
-+*
-+*******************************************************************************************
-+* DESCRIPTION: Entry point to initialize and load ax5 daughter board
-+*
-+* INPUT: PITIDSLHW_T *ppIHw
-+*
-+* RETURN: 0 --succeeded
-+* 1 --Failed
-+*
-+* Notes: external function osAllocateMemory(), osZeroMemory(), osLoadFWImage() are required
-+*****************************************************************************************/
-+int dslhal_api_dslStartup
-+(
-+ PITIDSLHW_T *ppIHw
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_gatherStatistics
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Read statistical infromation from ax5 modem daugter card.
-+* Input: tidsl_t *ptidsl
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+
-+void dslhal_api_gatherStatistics
-+(
-+ tidsl_t * ptidsl
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_initStatistics
-+*
-+*********************************************************************************************
-+* DESCRIPTION: init statistical infromation of ax5 modem daugter card.
-+*
-+* Input: tidsl_t *ptidsl
-+*
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+void dslhal_api_initStatistics
-+(
-+ tidsl_t * ptidsl
-+);
-+
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_getDslDriverVersion
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This routine supply DSL Driver version.
-+*
-+* INPUT: tidsl_t * ptidsl
-+* void *pVer, DSP Driver Version Pointer
-+*
-+* RETURN: 0 --succeeded
-+* 1 --Failed
-+* Note: See verdef_u.h for version structure definition.
-+*****************************************************************************************/
-+
-+void dslhal_api_getDslHalVersion
-+(
-+ void *pVer
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_dslShutdown
-+*
-+*******************************************************************************************
-+* DESCRIPTION: routine to shutdown ax5 modem and free the resource
-+*
-+* INPUT: tidsl_t *ptidsl
-+*
-+* RETURN: NULL
-+*
-+* Notes: external function osFreeMemory() is required.
-+*****************************************************************************************/
-+
-+int dslhal_api_dslShutdown
-+(
-+ tidsl_t *ptidsl
-+);
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_getDspVersion
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This routine supply AX5 daugther card DSP version.
-+*
-+* INPUT: tidsl_t * ptidsl
-+* void *pVer, DSP version struct is returned starting at this pointer
-+*
-+* RETURN: 0 --succeeded
-+* 1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_api_getDspVersion
-+(
-+ tidsl_t *ptidsl,
-+ void *pVer
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_digi_memTestA()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function does the digital tests on the DSP. It does the DSP ID test,
-+* memory tests on the external and internal memories of DSP, Codec Interconnect
-+* test and Interrupt Test.
-+*
-+* Input: Test selects the test to be performed based on the elements set of 9 element
-+* array passed the the parameter.
-+*
-+* Return: Status of the Tests Failed
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_digi_memTestA
-+(
-+unsigned int* Test
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_digi_memTestB()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function does the digital tests on the DSP. It does the DSP ID test,
-+* memory tests on the external and internal memories of DSP, Codec Interconnect
-+* test and Interrupt Test.
-+*
-+* Input: Test selects the digital test to be performed.
-+*
-+* Return: Status of the Tests Failed
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_digi_memTestB
-+(
-+unsigned int Test,
-+unsigned int *Status
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_tonesTestA()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+* tones and Medley's with missing tones. These signals are defined in ITU
-+* G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+* Array is a 64 element unsigned integer type array. The element of this array
-+* describe which tones are to be generated by selecting the element of
-+* the array to be non zero.
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+void dslhal_diags_anlg_tonesTestA
-+(
-+unsigned int Test,
-+unsigned int* Array
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_tonesTestB()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+* tones and Medley's with missing tones. These signals are defined in ITU
-+* G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+* Array is a 64 element unsigned integer type array. The element of this array
-+* describe which tones are to be generated by selecting the element of
-+* the array to be non zero.
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+void dslhal_diags_anlg_tonesTestB
-+(
-+unsigned int Test,
-+unsigned int Tones
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_rxNoiseTest()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+* tones and Medley's with missing tones. These signals are defined in ITU
-+* G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+* Tones selects the .
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+void dslhal_diags_anlg_rxNoiseTest
-+(int agcFlag,
-+short pga1,
-+short pga2,
-+short pga3,
-+short aeq
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_ecNoiseTest()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+* tones and Medley's with missing tones. These signals are defined in ITU
-+* G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+* Tones selects the .
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+void dslhal_diags_anlg_ecNoiseTest
-+(int agcFlag,
-+short pga1,
-+short pga2,
-+short pga3,
-+short aeq
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_pollTrainingStatus()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: code to decode modem status and to start modem training
-+*
-+* Input: tidsl_t *ptidsl
-+*
-+* Return: 0-? status mode training
-+* -1 failed
-+*
-+********************************************************************************************/
-+int dslhal_api_pollTrainingStatus
-+(
-+ tidsl_t *ptidsl
-+);
-+
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_handleTrainingInterrupt()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Code to handle ax5 hardware interrupts
-+*
-+* Input: tidsl_t *ptidsl
-+* int *pMsg, pointer to returned hardware messages. Each byte represent a messge
-+* int *pTag, pointer to returned hardware message tags. Each byte represent a tag.
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+int dslhal_api_handleTrainingInterrupt
-+(
-+ tidsl_t *ptidsl,
-+ int intrSource
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNumber)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction Sets the EOC Serial Number
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * char *SerialNumber : Input EOC Serial Number
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setEocSerialNumber
-+(
-+tidsl_t *ptidsl,
-+char *SerialNumber
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction Sets the EOC Serial Number
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * char *VendorID : EOC Vendor ID
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setEocVendorId
-+(
-+tidsl_t *ptidsl,
-+char *VendorID
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNum)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction Sets the EOC Revision Number
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * char *RevNum : Input EOC Revision Number
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setEocRevisionNumber
-+(
-+tidsl_t *ptidsl,
-+char *RevNumber
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction Sets the EOC ATUR Config Register
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * char *RevNum : Input EOC ATUR Config Register
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setAturConfig
-+(
-+tidsl_t *ptidsl,
-+char *ATURConfig
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_disableLosAlarm(tidsl_t *ptidsl, unsigned int set)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction disables all the LOS alarms
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * unsigned int set // if set == TRUE : Disable LOS alarms, else enable
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ * NOTES: Currently not supported in any version other than MR4 Patch release..
-+ *****************************************************************************************/
-+unsigned int dslhal_api_disableLosAlarm
-+(
-+tidsl_t *ptidsl,
-+unsigned int
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_sendIdle(tidsl_t *ptidsl)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the CMD_IDLE message to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_sendIdle
-+(
-+tidsl_t *ptidsl
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_sendQuiet(tidsl_t *ptidsl)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_sendQuiet
-+(
-+tidsl_t *ptidsl
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_sendDgasp(tidsl_t *ptidsl)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the HOST_DGASP message to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_sendDgasp
-+(
-+tidsl_t *ptidsl
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setMarginThreshold(tidsl_t *ptidsl, int threshold)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction does sets the Margin threshold
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * int threshold
-+ *
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setMarginThreshold
-+(
-+tidsl_t *ptidsl,
-+int threshold
-+);
-+
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_setMarginMonitorFlags(tidsl_t *ptidsl, unsigned int trainflag,unsigned int shwtflag)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction does sets the Margin monitoring flag
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * unsigned int trainflag
-+ * unsigned int shwtflag
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_setMarginMonitorFlags
-+(
-+tidsl_t *ptidsl,
-+unsigned int trainflag,
-+unsigned int shwtflag
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Rate Adapt Enable Flag
-+*
-+* INPUT: PITIDSLHW_T *ptidsl
-+* unsigned int flag //if flag = TRUE set flag else reset
-+* RETURN: 0 SUCCESS
-+* 1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setRateAdaptFlag
-+(
-+tidsl_t *ptidsl,
-+unsigned int flag
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_setTrellisFlag(tidsl_t *ptidsl, unsigned int flag)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Trellis Coding Enable Flag
-+*
-+* INPUT: PITIDSLHW_T *ptidsl
-+* unsigned int flag //if flag = TRUE set flag else reset
-+* RETURN: 0 SUCCESS
-+* 1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setTrellisFlag
-+(
-+tidsl_t *ptidsl,
-+unsigned int flag
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Maximum bits per carrier value
-+*
-+* INPUT: PITIDSLHW_T *ptidsl
-+* unsigned int maxbits : should be a value between 0-15
-+*
-+* RETURN: 0 SUCCESS
-+* 1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setMaxBitsPerCarrier
-+(
-+tidsl_t *ptidsl,
-+unsigned int maxbits
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the Maximum Interleave Depth Supported
-+*
-+* INPUT: PITIDSLHW_T *ptidsl
-+* unsigned int maxdepth : Should be between 0 and 3 depending on intlv buffer
-+* size 64-512
-+* RETURN: 0 SUCCESS
-+* 1 FAILED
-+*
-+*****************************************************************************************/
-+unsigned int dslhal_api_setMaxInterleaverDepth
-+(
-+tidsl_t *ptidsl,
-+unsigned int maxdepth
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode)
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction Sets the desired training mode(none/T1.413/G.dmt/G.lite)
-+*
-+* INPUT: PITIDSLHW_T *ptidsl
-+* unsigned int trainmode :Should be between 0 and 4; 0:No Mode 1:Multimode
-+* 2: T1.413, 3:G.dmt, 4: G.lite
-+* RETURN: 0 SUCCESS
-+* 1 FAILED
-+*
-+*****************************************************************************************/
-+
-+unsigned int dslhal_api_setTrainingMode
-+(
-+tidsl_t *ptidsl,
-+unsigned int trainmode
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_dslRetrain(tidsl_t *ptidsl)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_dslRetrain
-+(
-+tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_acknowledgeInterrupt()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_acknowledgeInterrupt
-+(tidsl_t * ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_disableDspHybridSelect()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_disableDspHybridSelect
-+(tidsl_t * ptidsl,
-+ unsigned int disable
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_disableDspHybridSelect()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_selectHybrid
-+(tidsl_t * ptidsl,
-+ unsigned int hybridNum
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_reportHybridMetrics()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_reportHybridMetrics
-+(tidsl_t * ptidsl,
-+ int *metric
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl, unsigned int pairSelect)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+
-+unsigned int dslhal_api_selectInnerOuterPair
-+(tidsl_t *ptidsl,
-+unsigned int pairSelect
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl, unsigned int pairSelect)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+
-+unsigned int dslhal_api_resetTrainFailureLog
-+(tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_controlLed()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureLed
-+(tidsl_t * ptidsl,
-+unsigned int idLed,
-+unsigned int onOff
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureExternBert()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureExternBert
-+(tidsl_t * ptidsl,
-+unsigned int configParm,
-+unsigned int parmVal
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureAtmBert()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureAtmBert
-+(tidsl_t * ptidsl,
-+unsigned int configParm,
-+unsigned int parmVal
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_configureDgaspLpr()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_configureDgaspLpr
-+(tidsl_t * ptidsl,
-+unsigned int configParm,
-+unsigned int parmVal
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_onOffPcb()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_onOffPcb
-+(tidsl_t * ptidsl,
-+unsigned int onOff
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_onOffBitSwap()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Turns on / off the power cutback feature;
-+* Input
-+* usDs; 0 = us and 1 = ds;
-+* onOff; 0 = OFF and 1 = ON
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_onOffBitSwap
-+(tidsl_t * ptidsl,
-+ unsigned int usDs,
-+ unsigned int onOff
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_configDsTones()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Turns on / off specific tones in the downstream direction;
-+* Input
-+* pointer to the array specifying the tones to be turned on/off
-+*
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_configDsTones
-+(tidsl_t * ptidsl,
-+ unsigned int *dsTones
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_getAocBitSwapBuffer()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Fetches the Tx/Rx AOC bitswap Buffer;
-+* Input
-+* Transmit / Receive buffer to be fetched
-+*
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_getAocBitswapBuffer
-+(tidsl_t * ptidsl,
-+unsigned int usDs
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_readTrainingMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Reads all the training messages on demand;
-+* Input
-+* tidsl_t *ptidsl : Pointer to application structure
-+* void *msgStruct : Pointer to Message Structure
-+*
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_readTrainingMessages
-+(tidsl_t * ptidsl,
-+void *msgPtr
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_getTrainingState()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Reads all the training messages on demand;
-+* Input
-+* tidsl_t *ptidsl : Pointer to application structure
-+* void *msgStruct : Pointer to training state structure
-+*
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_getTrainingState
-+(tidsl_t * ptidsl,
-+void *statePtr
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_resetBitSwapMessageLog()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Clears the Aoc Bitswap Message Log
-+* Input
-+* tidsl_t *ptidsl : Pointer to application structure
-+* unsigned int usDs ; Upstream=0, Downstream=1
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_resetBitSwapMessageLog
-+(tidsl_t * ptidsl,
-+ unsigned int usDs
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_setConstellationBinNumber()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Specifies the bin number for which constellation data should be fetched
-+* Input
-+* tidsl_t *ptidsl : Pointer to application structure
-+* unsigned int binNum : constellation bin number whose data is required
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_setConstellationBinNumber
-+(tidsl_t * ptidsl,
-+ unsigned int binNum
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_resetTrainStateHistory()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Clears the Training State History Log
-+* Input
-+* tidsl_t *ptidsl : Pointer to application structure
-+*
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_resetTrainStateHistory
-+(tidsl_t * ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_getSnrPerBin()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Get SNR data per bin
-+* Input
-+* tidsl_t *ptidsl : Pointer to application structure
-+*
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_getSnrPerBin
-+(tidsl_t * ptidsl,
-+ unsigned int snrBufferOpt
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_logEocMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Logs EOC messages sent by the Modem to the CO
-+* Input
-+* tidsl_t *ptidsl : Pointer to application structure
-+* unsigned int eocLowerBytes : Lower [1-5] bits of EOC Message
-+* unsigned int eocUpperBytes : Upper [6-13] bits of EOC Message
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_logEocMessages
-+(tidsl_t * ptidsl,
-+ unsigned int usDs,
-+ unsigned int eocLowerBytes,
-+ unsigned int eocUpperBytes
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_getReasonForDrop()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Reads the reason for dropping DSL connection;
-+* Input
-+* tidsl_t *ptidsl : Pointer to application structure
-+
-+*
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_getReasonForDrop
-+(tidsl_t * ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_ctrlMaxAvgFineGains()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Turns on / off the host control for Max Avg Fine Gains; 0 = OFF and 1 = ON
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_ctrlMaxAvgFineGains
-+(tidsl_t * ptidsl,
-+unsigned int onOff
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_setMaxAvgFineGain()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Set the Maximum Average Fine Gain Value
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_setMaxAvgFineGain
-+(tidsl_t * ptidsl,
-+ short fineGain
-+);
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_readPhySettings()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Reads the advanced Phy layer settings on demand;
-+* Input
-+* tidsl_t *ptidsl : Pointer to application structure
-+* void *cfgStruct : Pointer to Phy Config Structure
-+*
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_readPhySettings
-+(tidsl_t * ptidsl,
-+void *cfgPtr
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_advcfg_setBlackOutBits()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the Blackout Bits in the RMSGPCB message
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_advcfg_setBlackOutBits
-+(tidsl_t * ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_genericDspRead()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Reads from a generic location in the host interface
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_genericDspRead
-+(tidsl_t * ptidsl,
-+ unsigned int offset1,
-+ unsigned int offset2,
-+ unsigned int offset3,
-+ unsigned char* localBuffer,
-+ unsigned int numBytes
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_genericDspWrite()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Writes to a generic location in the host interface
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_genericDspWrite
-+(tidsl_t * ptidsl,
-+ unsigned int offset1,
-+ unsigned int offset2,
-+ unsigned int offset3,
-+ unsigned char* localBuffer,
-+ unsigned int numBytes
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_dspInterfaceRead()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Reads from a generic location in the host interface
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_dspInterfaceRead
-+(tidsl_t * ptidsl,
-+ unsigned int baseAddr,
-+ unsigned int numOffsets,
-+ unsigned int *offsets,
-+ unsigned char* localBuffer,
-+ unsigned int numBytes
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_api_dspInterfaceWrite()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Writes to a generic location in the host interface
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_api_dspInterfaceWrite
-+(tidsl_t * ptidsl,
-+ unsigned int baseAddr,
-+ unsigned int numOffsets,
-+ unsigned int *offsets,
-+ unsigned char* localBuffer,
-+ unsigned int numBytes
-+);
-+
-+/******************************************************************************************
-+ * FUNCTION NAME: dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd)
-+ *
-+ *******************************************************************************************
-+ * DESCRIPTION: This fuction sends the passed mailbox command to the DSP
-+ *
-+ * INPUT: PITIDSLHW_T *ptidsl
-+ * unsigned int cmd
-+ *
-+ * RETURN: 0 SUCCESS
-+ * 1 FAILED
-+ *
-+ *****************************************************************************************/
-+unsigned int dslhal_api_sendMailboxCommand
-+(tidsl_t *ptidsl,
-+unsigned int cmd
-+);
-+
-+#ifdef INTERNAL_BUILD
-+#include <dsl_hal_internal_api.h>
-+#endif
-+
-+
-+#endif /* pairs #ifndef __DSL_APPLICATION_INTERFACE_H__ */
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_logtable.h linux.dev/drivers/atm/sangam_atm/dsl_hal_logtable.h
---- linux.old/drivers/atm/sangam_atm/dsl_hal_logtable.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_logtable.h 2005-08-23 04:46:50.097843696 +0200
-@@ -0,0 +1,259 @@
-+unsigned int log10[]=
-+{
-+ 0,
-+ 771,
-+ 1221,
-+ 1541,
-+ 1789,
-+ 1992,
-+ 2163,
-+ 2312,
-+ 2443,
-+ 2560,
-+ 2666,
-+ 2763,
-+ 2852,
-+ 2934,
-+ 3011,
-+ 3083,
-+ 3150,
-+ 3213,
-+ 3274,
-+ 3331,
-+ 3385,
-+ 3437,
-+ 3486,
-+ 3533,
-+ 3579,
-+ 3622,
-+ 3664,
-+ 3705,
-+ 3744,
-+ 3781,
-+ 3818,
-+ 3853,
-+ 3887,
-+ 3921,
-+ 3953,
-+ 3984,
-+ 4015,
-+ 4044,
-+ 4073,
-+ 4101,
-+ 4129,
-+ 4156,
-+ 4182,
-+ 4207,
-+ 4232,
-+ 4257,
-+ 4281,
-+ 4304,
-+ 4327,
-+ 4349,
-+ 4371,
-+ 4393,
-+ 4414,
-+ 4435,
-+ 4455,
-+ 4475,
-+ 4495,
-+ 4514,
-+ 4533,
-+ 4552,
-+ 4570,
-+ 4589,
-+ 4606,
-+ 4624,
-+ 4641,
-+ 4658,
-+ 4675,
-+ 4691,
-+ 4707,
-+ 4723,
-+ 4739,
-+ 4755,
-+ 4770,
-+ 4785,
-+ 4800,
-+ 4815,
-+ 4829,
-+ 4844,
-+ 4858,
-+ 4872,
-+ 4886,
-+ 4899,
-+ 4913,
-+ 4926,
-+ 4939,
-+ 4952,
-+ 4965,
-+ 4978,
-+ 4990,
-+ 5003,
-+ 5015,
-+ 5027,
-+ 5039,
-+ 5051,
-+ 5063,
-+ 5075,
-+ 5086,
-+ 5098,
-+ 5109,
-+ 5120,
-+ 5131,
-+ 5142,
-+ 5153,
-+ 5164,
-+ 5174,
-+ 5185,
-+ 5195,
-+ 5206,
-+ 5216,
-+ 5226,
-+ 5236,
-+ 5246,
-+ 5256,
-+ 5266,
-+ 5275,
-+ 5285,
-+ 5295,
-+ 5304,
-+ 5313,
-+ 5323,
-+ 5332,
-+ 5341,
-+ 5350,
-+ 5359,
-+ 5368,
-+ 5377,
-+ 5386,
-+ 5394,
-+ 5403,
-+ 5412,
-+ 5420,
-+ 5429,
-+ 5437,
-+ 5445,
-+ 5454,
-+ 5462,
-+ 5470,
-+ 5478,
-+ 5486,
-+ 5494,
-+ 5502,
-+ 5510,
-+ 5518,
-+ 5525,
-+ 5533,
-+ 5541,
-+ 5548,
-+ 5556,
-+ 5563,
-+ 5571,
-+ 5578,
-+ 5586,
-+ 5593,
-+ 5600,
-+ 5607,
-+ 5614,
-+ 5622,
-+ 5629,
-+ 5636,
-+ 5643,
-+ 5649,
-+ 5656,
-+ 5663,
-+ 5670,
-+ 5677,
-+ 5683,
-+ 5690,
-+ 5697,
-+ 5703,
-+ 5710,
-+ 5716,
-+ 5723,
-+ 5729,
-+ 5736,
-+ 5742,
-+ 5749,
-+ 5755,
-+ 5761,
-+ 5767,
-+ 5773,
-+ 5780,
-+ 5786,
-+ 5792,
-+ 5798,
-+ 5804,
-+ 5810,
-+ 5816,
-+ 5822,
-+ 5828,
-+ 5834,
-+ 5839,
-+ 5845,
-+ 5851,
-+ 5857,
-+ 5862,
-+ 5868,
-+ 5874,
-+ 5879,
-+ 5885,
-+ 5891,
-+ 5896,
-+ 5902,
-+ 5907,
-+ 5913,
-+ 5918,
-+ 5924,
-+ 5929,
-+ 5934,
-+ 5940,
-+ 5945,
-+ 5950,
-+ 5955,
-+ 5961,
-+ 5966,
-+ 5971,
-+ 5976,
-+ 5981,
-+ 5986,
-+ 5992,
-+ 5997,
-+ 6002,
-+ 6007,
-+ 6012,
-+ 6017,
-+ 6022,
-+ 6027,
-+ 6031,
-+ 6036,
-+ 6041,
-+ 6046,
-+ 6051,
-+ 6056,
-+ 6060,
-+ 6065,
-+ 6070,
-+ 6075,
-+ 6079,
-+ 6084,
-+ 6089,
-+ 6093,
-+ 6098,
-+ 6103,
-+ 6107,
-+ 6112,
-+ 6116,
-+ 6121,
-+ 6125,
-+ 6130,
-+ 6134,
-+ 6139,
-+ 6143,
-+ 6148,
-+ 6152,
-+ 6156,
-+ 6161,
-+ 6165
-+ };
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_register.h linux.dev/drivers/atm/sangam_atm/dsl_hal_register.h
---- linux.old/drivers/atm/sangam_atm/dsl_hal_register.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_register.h 2005-08-23 04:46:50.097843696 +0200
-@@ -0,0 +1,337 @@
-+#ifndef ___DSL_REGISTER_DEFINES_H___
-+#define ___DSL_REGISTER_DEFINES_H___ 1
-+
-+/*******************************************************************************
-+* FILE PURPOSE: DSL HAL H/W Registers and Constant Declarations for Sangam
-+*
-+********************************************************************************
-+* FILE NAME: dsl_hal_register.h
-+*
-+* DESCRIPTION:
-+* Contains DSL HAL APIs for Adam2 OS functions
-+*
-+*
-+* (C) Copyright 2001-02, Texas Instruments, Inc.
-+* History
-+* Date Version Notes
-+* 06Feb03 0.00.00 RamP Created
-+* 21Mar03 0.00.01 RamP Changed header files for Modular
-+* build framework
-+* 21Mar03 0.00.02 RamP Introduced malloc size for DSP f/w
-+* 07Apr03 0.00.03 RamP Implemented new error reporting scheme
-+* Changed Commenting to C style only
-+* 12Apr03 0.00.04 RamP Added Interrupt Mask defines
-+* 14Apr03 0.00.05 RamP Renamed macros for REG8, REG16 & REG32
-+* 21Apr03 0.01.00 RamP Added Interrupt source/clear registers
-+* Changed enum RSTATE_SHOWTIME to 5
-+* 24Apr03 0.01.01 RamP Moved the RSTATE enum to api.h
-+* Added olay recovery error condition
-+* 14May03 0.01.02 RamP Added defines for power computation
-+* Added error condition for hybrids
-+* 04Jun03 0.01.03 RamP Added enum for config flags,
-+* Cleaned up AR5 register defines
-+* Added defines for higher data rate
-+* 06Jun03 0.01.04 RamP Added error & interrupt defines
-+* 09Jun03 0.01.05 RamP Modified enum for current config
-+* Added additional C-Rates defines
-+* 18Jul03 0.01.06 RamP Modified internal build flow
-+* 21Aug03 0.01.07 RamP Added constellation buffer size
-+* 08Oct03 0.01.08 RamP Added us/ds Bits n gains size
-+* 12Oct03 0.01.08 RamP Added ADSL2 Message sizes, lengths
-+* and offsets for various formats
-+* 29Oct03 0.01.09 RamP Added ADSL2 Delt offsets & sizes
-+* 24Nov03 0.01.10 RamP Added bit field number, scan vector
-+* 26Dec03 0.01.11 RamP Removed the oamFeature masks to api.h
-+*******************************************************************************/
-+
-+#include "env_def_typedefs.h"
-+#ifdef INTERNAL_BUILD
-+#include "dev_host_internalinterface.h"
-+#endif
-+#include "dev_host_interface.h"
-+#include "dsl_hal_api.h"
-+
-+#define ADSLSS_BASE 0x01000000
-+#define BBIF_BASE 0x02000000
-+
-+#define ADSLSSADR (BBIF_BASE+0x0000)
-+#define ADSLSSADRMASK 0xff000000
-+#define WAKEUP_DSP 0x00000001
-+
-+/* Ax7 Reset Control */
-+
-+#define RST_CNTRL_BASE 0x8611600
-+#define RST_CNTRL_PRCR (RST_CNTRL_BASE + 0x00 )
-+
-+#define RST_CNTRL_PRCR_GPIO 0x00000040
-+#define RST_CNTRL_PRCR_ADSLSS 0x00000080
-+#define RST_CNTRL_PRCR_USB 0x00000100
-+#define RST_CNTRL_PRCR_SAR 0x00000200
-+#define RST_CNTRL_PRCR_DSP 0x00800000
-+#define RST_CNTRL_PRCR_EMAC1 0x00200000 /* EMAC1 reset */
-+
-+#define RST_CNTRL_SWRCR (RST_CNTRL_BASE + 0x04 )
-+#define RST_SWRCR_SWR0 0x00000001
-+#define RST_SWRCR_SWR1 0x00000002
-+
-+#define RST_CNTRL_RSR (TNETD53XX_RST_CNTRL_BASE + 0x08 )
-+#define RST_RSR_RSCAUSE 0x00000003 /* Software Reset Caused by writing to SWR1 bit */
-+
-+
-+/* ******************************************************
-+Interrupt sources on Ax7 interrupt controller.
-+The reserved sources are noted.
-+********************************************************* */
-+
-+#define INTR_CNTRL_SRC_SECOND 0
-+#define INTR_CNTRL_SRC_EXTERNAL0 1
-+#define INTR_CNTRL_SRC_EXTERNAL1 2
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_TIMER0 5
-+#define INTR_CNTRL_SRC_TIMER1 6
-+#define INTR_CNTRL_SRC_UART0 7
-+#define INTR_CNTRL_SRC_UART1 8
-+#define INTR_CNTRL_SRC_DMA0 9
-+#define INTR_CNTRL_SRC_DMA1 10
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_SAR 15
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_EMAC0 19
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_VLYNQ0 21
-+#define INTR_CNTRL_SRC_CODEC_WAKE 22
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_USB 24
-+#define INTR_CNTRL_SRC_VLYNQ1 25
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_EMAC1 28
-+#define INTR_CNTRL_SRC_I2C 29
-+#define INTR_CNTRL_SRC_DMA2 30
-+#define INTR_CNTRL_SRC_DMA3 31
-+/* reserved sources ... */
-+#define INTR_CNTRL_SRC_VDMA_RX 37
-+#define INTR_CNTRL_SRC_VDMA_TX 38
-+#define INTR_CNTRL_SRC_ADSLSS 39
-+
-+#ifndef K0BASE
-+#define K0BASE 0x80000000
-+#endif
-+
-+#ifndef K1BASE
-+#define K1BASE 0xA0000000
-+#endif
-+
-+#ifndef PHYS_ADDR
-+#define PHYS_ADDR(X) ((X) & 0X1FFFFFFF)
-+#endif
-+
-+#ifndef PHYS_TO_K0
-+#define PHYS_TO_K0(X) (PHYS_ADDR(X)|K0BASE)
-+#endif
-+
-+#ifndef PHYS_TO_K1
-+#define PHYS_TO_K1(X) (PHYS_ADDR(X)|K1BASE)
-+#endif
-+
-+#ifndef DSLHAL_REG8
-+#define DSLHAL_REG8( addr ) (*(volatile unsigned short *) PHYS_TO_K1(addr))
-+#endif
-+
-+#ifndef DSLHAL_REG16
-+#define DSLHAL_REG16( addr ) (*(volatile unsigned short *)PHYS_TO_K1(addr))
-+#endif
-+
-+#ifndef DSLHAL_REG32
-+#define DSLHAL_REG32( addr ) (*(volatile unsigned int *)PHYS_TO_K1(addr))
-+#endif
-+
-+#ifndef NULL
-+#define NULL 0
-+#endif
-+
-+#ifndef TRUE
-+#define TRUE (1==1)
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE (1==2)
-+#endif
-+
-+/*******************************************************************************
-+* Type Defines for Library
-+********************************************************************************/
-+typedef unsigned int size_t;
-+
-+#define TIDSL_HW_CREATED 0x00000001
-+#define TIDSL_HW_OPENED 0x00000002
-+#define TIDSL_HW_STARTED 0x00000004
-+#define TIDSL_OS_INITIALIZED 0x00000008
-+
-+/* Data Pump CRATES Table Defines */
-+#define SIZE_OF_CRATES1_TABLE 120
-+#define CRATES1_BF_LS0 7
-+#define CRATES1_BI_LS0 17
-+#define CRATES1_BF_AS0 0
-+#define CRATES1_BI_AS0 10
-+#define CRATES1_BF_DSRS 20
-+#define CRATES1_BI_DSRS 21
-+#define CRATES1_BFI_DSS 22
-+#define CRATES1_BFI_DSI 23
-+#define CRATES1_BF_USRS 25
-+#define CRATES1_BI_USRS 26
-+#define CRATES1_BFI_USS 27
-+#define CRATES1_BFI_USI 28
-+
-+#define FAST_PATH 0
-+#define INTERLEAVED_PATH 1
-+
-+#define LINE_NOT_CONNECTED 0
-+#define LINE_CONNECTED 1
-+#define LINE_DISCONNECTED 2
-+#define LINE_NOT_TO_CONNECT 3
-+
-+#define MAXSECTIONS 125
-+
-+/*****************************************************************************************
-+ * Localstructure declarations
-+ *
-+ ****************************************************************************************/
-+enum
-+{
-+ DSLHAL_ERROR_NO_ERRORS, /* 00 */
-+ DSLHAL_ERROR_UNRESET_ADSLSS, /* 01 */
-+ DSLHAL_ERROR_RESET_ADSLSS, /* 02 */
-+ DSLHAL_ERROR_UNRESET_DSP, /* 03 */
-+ DSLHAL_ERROR_RESET_DSP, /* 04 */
-+ DSLHAL_ERROR_NO_FIRMWARE_IMAGE, /* 05 */
-+ DSLHAL_ERROR_MALLOC, /* 06 */
-+ DSLHAL_ERROR_FIRMWARE_MALLOC, /* 07 */
-+ DSLHAL_ERROR_DIAG_MALLOC, /* 08 */
-+ DSLHAL_ERROR_OVERLAY_MALLOC, /* 09 */
-+ DSLHAL_ERROR_CODE_DOWNLOAD, /* 10 */
-+ DSLHAL_ERROR_DIAGCODE_DOWNLOAD, /* 11 */
-+ DSLHAL_ERROR_BLOCK_READ, /* 12 */
-+ DSLHAL_ERROR_BLOCK_WRITE, /* 13 */
-+ DSLHAL_ERROR_MAILBOX_READ, /* 14 */
-+ DSLHAL_ERROR_MAILBOX_WRITE, /* 15 */
-+ DSLHAL_ERROR_MAILBOX_NOMAIL, /* 16 */
-+ DSLHAL_ERROR_MAILBOX_OVERFLOW, /* 17 */
-+ DSLHAL_ERROR_INVALID_PARAM, /* 18 */
-+ DSLHAL_ERROR_ADDRESS_TRANSLATE, /* 19 */
-+ DSLHAL_ERROR_FIRMWARE_CRC, /* 20 */
-+ DSLHAL_ERROR_FIRMWARE_OFFSET, /* 21 */
-+ DSLHAL_ERROR_CONFIG_API_FAILURE, /* 22 */
-+ DSLHAL_ERROR_EOCREG_API_FAILURE, /* 23 */
-+ DSLHAL_ERROR_VERSION_API_FAILURE, /* 24 */
-+ DSLHAL_ERROR_STATS_API_FAILURE, /* 25 */
-+ DSLHAL_ERROR_MARGIN_API_FAILURE, /* 26 */
-+ DSLHAL_ERROR_CTRL_API_FAILURE, /* 27 */
-+ DSLHAL_ERROR_HYBRID_API_FAILURE, /* 28 */
-+ DSLHAL_ERROR_MODEMENV_API_FAILURE, /* 29 */
-+ DSLHAL_ERROR_INTERRUPT_FAILURE, /* 30 */
-+ DSLHAL_ERROR_INTERNAL_API_FAILURE, /* 31 */
-+ DSLHAL_ERROR_DIGIDIAG_FAILURE, /* 32 */
-+ DSLHAL_ERROR_TONETEST_FAILURE, /* 33 */
-+ DSLHAL_ERROR_NOISETEST_FAILURE, /* 34 */
-+ DSLHAL_ERROR_MODEMSTATE, /* 35 */
-+ DSLHAL_ERROR_OVERLAY_CORRUPTED /* 36 */
-+};
-+
-+enum
-+{
-+ CONFIG_FLAG_NOFLAG, /* 00 */
-+ CONFIG_FLAG_TRELLIS, /* 01 */
-+ CONFIG_FLAG_EC, /* 02 */
-+ CONFIG_FLAG_RS /* 03 */
-+};
-+
-+#define USE_EMIF_REV 0
-+#define USE_CVR_REV 1
-+#define TNETD53XX_MAXLOOP 10000
-+#define REVERB 0
-+#define MEDLEY 1
-+#define NONINTENSE 0
-+#define slavespace0 0xa1000000
-+
-+#define MASK_MAILBOX_INTERRUPTS 0x00000001
-+#define MASK_BITFIELD_INTERRUPTS 0x00000002
-+#define MASK_HEARTBEAT_INTERRUPTS 0x00000004
-+#define DSP_INTERRUPT_SOURCE_REGISTER 0x020007A0
-+#define DSP_INTERRUPT_CLEAR_REGISTER 0x020007A4
-+
-+#define DIGITAL_DIAG_MEMSIZE 1048576
-+#define CRC32_QUOTIENT 0x04c11db7
-+#define DSP_FIRMWARE_MALLOC_SIZE 0x7ffff
-+#define DSP_CONSTELLATION_BUFFER_SIZE 1024*4
-+#define LOG43125 9303
-+#define US_NOMINAL_POWER (-38)
-+#define US_BNG_LENGTH 32
-+#define DS_BNG_LENGTH 256
-+#define NUMBER_OF_BITFIELDS 4
-+#define BITFIELD_SCAN 0x80000000
-+
-+/* ADSL Message offsets from Host Interface Pointer */
-+
-+/* ADSL2 Messages Index and Length defines */
-+
-+#define CMSGFMT_INDEX 0
-+#define CMSGPCB_INDEX 1
-+#define RMSGFMT_INDEX 2
-+#define RMSGPCB_INDEX 3
-+#define RMSG1LD_INDEX 13
-+#define RMSG2LD_INDEX 14
-+#define RMSG3LD_INDEX 15
-+#define RMSG4LD_INDEX 16
-+#define RMSG5LD_INDEX 17
-+#define RMSG6LD_INDEX 18
-+#define RMSG7LD_INDEX 19
-+#define RMSG8LD_INDEX 20
-+#define RMSG9LD_INDEX 21
-+#define CMSG1LD_INDEX 22
-+#define CMSG2LD_INDEX 23
-+#define CMSG3LD_INDEX 24
-+#define CMSG4LD_INDEX 25
-+#define CMSG5LD_INDEX 26
-+#define CMSGPCB2_INDEX 28
-+#define CMSGPCB2L_INDEX 29
-+#define RMSGFMT2_INDEX 30
-+#define RMSGPCB2L_INDEX 31
-+#define CMSG1ADSL2_INDEX 32
-+#define RMSG1ADSL2_INDEX 33
-+#define CMSG2ADSL2_INDEX 34
-+#define RMSG2ADSL2_INDEX 35
-+#define CPARAMS_INDEX 36
-+#define RPARAMS_INDEX 37
-+
-+/* ADSL2 Message Sizes */
-+
-+#define CMSGFMT_SIZE 2
-+#define RMSGFMT_SIZE 2
-+#define CMSGPCB_SIZE 2
-+#define CMSGPCB2_SIZE 6 /* Annex A with Blackout */
-+#define CMSGPCB2L_SIZE 10 /* Annex B with Blackout */
-+#define RMSGPCB_SIZE 36
-+#define RMSG1LD_SIZE 16
-+#define RMSGxLD_SIZE 258
-+#define CMSG1LD_SIZE 16
-+#define CMSG2LD_SIZE 130
-+#define CMSG3LD_SIZE 66
-+#define CMSG4LD_SIZE 34
-+#define CMSG5LD_SIZE 34
-+#define CMSG1ADSL2_SIZE 24
-+#define RMSG1ADSL2_SIZE 4
-+#define CMSG2ADSL2_SIZE 4
-+#define RMSG2ADSL2_SIZE 32
-+#define CPARAMS_SIZE 136
-+#define RPARAMS_SIZE 808
-+
-+/* ADSL2 Plus Message Sizes (if Different from ADSL2) */
-+
-+#define RMSGPCB_P_SIZE 68
-+#define CMSG1ADSL2P_SIZE 40 /* With Blackout */
-+#define CPARAMS_PA_SIZE 168
-+#define RPARAMS_PA_SIZE 2088
-+#define CPARAMS_PB_SIZE 296
-+#define RPARAMS_PB_SIZE 2088
-+
-+#endif /* pairs #ifndef ___DSL_REGISTER_DEFINES_H___ */
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_support.c linux.dev/drivers/atm/sangam_atm/dsl_hal_support.c
---- linux.old/drivers/atm/sangam_atm/dsl_hal_support.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_support.c 2005-08-23 04:46:50.100843240 +0200
-@@ -0,0 +1,2788 @@
-+/*******************************************************************************
-+* FILE PURPOSE: DSL Driver API functions for Sangam
-+*********************************************************************************
-+* FILE NAME: dsl_hal_support.c
-+*
-+* DESCRIPTION:
-+* Contains DSL HAL APIs for Modem Control
-+*
-+*
-+* (C) Copyright 2001-02, Texas Instruments, Inc.
-+* History
-+* Date Version Notes
-+* 06Feb03 0.00.00 RamP Created
-+* 21Mar03 0.00.01 RamP Inserted byteswap functions
-+* 07Apr03 0.00.02 RamP Implemented new error reporting scheme
-+* Changed Commenting to C style only
-+* 12Apr03 0.00.03 RamP Added function to set Interrupt Bit
-+* Masks for bitfield & Mailboxes
-+* 14Apr03 0.00.04 RamP Added function to process modem state
-+* bit fields; renamed REG32 macros
-+* Changed interrupt bit field settings
-+* 15Apr03 0.00.05 RamP Fixed exit condition on dslShutdown
-+* 21Apr03 0.01.00 RamP Fixed dslShutdown function & changed
-+* loop counter for overlay byteswaps
-+* (Alpha) Added cache writeback for overlays
-+* Added function acknowledgeInterrupt
-+* 22Apr03 0.01.01 RamP Moved acknowledgeInterrupt into api
-+* 24Apr03 0.01.02 RamP Added function to compare crc32 with
-+* pre-computed value as a recovery
-+* scheme for corrupt overlay pages
-+* 28Apr03 0.01.03 RamP Fixed a parameter in crc32 fxn call
-+* 05May03 0.01.04 RamP Fixed Message structure access in
-+* writeHostMailbox function
-+* 14May03 0.01.05 RamP Lookup to netService of dsp version
-+* (alpha ++) to determine pots/isdn service
-+* 21May03 0.01.06 RamP Added support for CO profiles
-+* 29May03 0.01.07 RamP Added critical section tabs for block
-+* read/write operations
-+* Added functions to reload overlay pages
-+* and CO Profiles
-+* 04Jun03 0.01.08 RamP Added state transition timing counters
-+* 06Jun03 0.01.09 RamP Added Interrupt source parsing function
-+* Interrupt masking for heartbeat added
-+* 09Jun03 0.01.10 RamP Modified modem state bit field processing
-+* for structure changes in ITIDSLHW
-+* fixed problem in free memory for CO prof
-+* 18Jul03 0.01.11 RamP Optimized free memory for CO profiles &
-+* overlay pages in the supporting APIs
-+* 28Jul03 0.02.00 RamP Modified the process bitfield functn
-+* for LED & Application State report
-+* 21Aug03 0.03.00 RamP Added logic to allocate & communicate
-+* memory for constellation buffer display
-+* 29Sep03 0.03.01 RamP Added API switch calls to advcfg module
-+* to abstract them from the API module
-+* 12Oct03 0.03.02 RamP Added API to gather ADSL2 Messages
-+* 14Oct03 0.03.03 RamP Added function to read CMsgsRA
-+* 23Oct03 0.03.04 RamP Changed train history index to circular
-+* buffer upon rollover
-+* 29Oct03 0.03.05 RamP Added Adsl2 Delt Message Parsing
-+* 12Nov03 0.03.06 RamP Fixed endianness issues with
-+* Constellation Display
-+* 14Nov03 0.03.07 RamP Added function to gather CRates1/RRates1
-+* before they get overwritten by CRatesRA
-+* 19Nov03 0.03.08 JohnP Revised dslhal_support_aocBitSwapProcessing to
-+* prevent duplicate ATU-R bitswaps going to ACT
-+* 24Nov03 0.03.09 RamP Implemented detailed State Tracking through
-+* Modem State bit fields for ADSL/2
-+* 12Dec03 0.03.10 RamP Tokenized advanced configuration code
-+* 12Dec03 0.03.11 RamP Added state reset upon IDLE
-+* 19Dec03 0.03.12 RamP Added static adsl2 byteswap function for
-+* handling pointer to pointer cases
-+* Changed adsl2 messages to correct pointer to
-+* pointer dereferencing problems in some OS
-+* 26Dec03 0.03.13 RamP Setting Current Address for Constellation
-+* buffer in addition to start address
-+* Added additional check to overlay page malloc
-+*******************************************************************************/
-+#include "dsl_hal_register.h"
-+#include "dsl_hal_support.h"
-+
-+static unsigned int dslhal_support_adsl2ByteSwap32(unsigned int in32Bits);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_unresetDslSubsystem
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This function unreset Dsl Subsystem
-+*
-+* INPUT: None
-+*
-+* RETURN: 0 if Pass; 1 if Fail
-+*
-+*****************************************************************************************/
-+int dslhal_support_unresetDslSubsystem(void)
-+{
-+ dprintf(4," dslhal_support_unresetDslSubsystem()\n");
-+ /* Put ADSLSS in to reset */
-+ DSLHAL_REG32(0xa8611a10) = 0x1;
-+ shim_osClockWait(64);
-+ dprintf(5,"Selected APLL Reg \n");
-+
-+ DSLHAL_REG32(0xa8610a90) = 0x4;
-+ shim_osClockWait(64);
-+ dprintf(5,"Enable Analog PLL \n");
-+
-+ DSLHAL_REG32(0xa8610a90) = 0x77fe;
-+ shim_osClockWait(64);
-+ dprintf(5,"Set PLL for DSP\n");
-+
-+ /* DSLHAL_REG32(0xa8611600) = 0x007f1bdf;*/
-+ DSLHAL_REG32(0xa8611600) |= RST_CNTRL_PRCR_ADSLSS;
-+ shim_osClockWait(64);
-+ dprintf(5,"Brought ADSLSS out of Reset \n");
-+
-+ DSLHAL_REG32(0xa861090c) &= ~((1<<20)|(1<<21)|(1<<22)|(1<<23)|(1<<24)|(1<<25));
-+ shim_osClockWait(64);
-+ dprintf(5,"Configured GPIO 20-25 for McBSP \n");
-+
-+ /*DSLHAL_REG32(0xa8611600) |= RST_CNTRL_PRCR_ADSLSS;*/
-+
-+
-+ /* DSLHAL_REG32(0xa8611a04) = 0x00000001;
-+ shim_osClockWait(64); */
-+
-+ dprintf(4," dslhal_support_unresetDslSubsystem done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_resetDslSubsystem
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This function unreset Dsl Subsystem
-+*
-+* INPUT: None
-+*
-+* RETURN: 0 if Pass; 1 if Fail
-+*
-+*****************************************************************************************/
-+int dslhal_support_resetDslSubsystem(void)
-+{
-+ dprintf(4, "dslhal_support_resetDslSubsystem \n");
-+ /* Put ADSLSS into reset */
-+ DSLHAL_REG32(0xa8611600) &= ~RST_CNTRL_PRCR_ADSLSS;
-+ shim_osClockWait(64);
-+ /* DSLHAL_REG32(0xa8611a04) = 0x00000000;
-+ shim_osClockWait(64); */
-+ dprintf(4, "dslhal_support_resetDslSubsystem Done \n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_unresetDsp()
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction takes ax5 daugter board out of reset.
-+*
-+* INPUT: None
-+*
-+* RETURN: 0 --successful.
-+* 1 --failed
-+*
-+*****************************************************************************************/
-+int dslhal_support_unresetDsp(void)
-+{
-+#ifdef PRE_SILICON
-+ /* unsigned char value; */
-+ int rc;
-+
-+ rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_SRC_ADDR);
-+ if(rc==DSLHAL_ERROR_ADDRESS_TRANSLATE)
-+ {
-+ dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
-+ return DSLHAL_ERROR_ADDRESS_TRANSLATE;
-+ }
-+ dprintf(5,"MDMA SRC: %08x\n", rc);
-+ DSLHAL_REG32(rc) = 0x80000001;
-+ rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_DST_ADDR);
-+ if(rc==DSLHAL_ERROR_ADDRESS_TRANSLATE)
-+ {
-+ dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
-+ return DSLHAL_ERROR_ADDRESS_TRANSLATE;
-+ }
-+ dprintf(5,"MDMA DST: %08x\n", rc);
-+ DSLHAL_REG32(rc) = 0x02090001;
-+ rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_CTL_ADDR);
-+ if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE)
-+ {
-+ dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
-+ return DSLHAL_ERROR_ADDRESS_TRANSLATE;
-+ }
-+ dprintf(5,"MDMA CTL: %08x\n", rc);
-+ DSLHAL_REG32(rc) = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC |
-+ DEV_MDMA_BURST1 | (1 << DEV_MDMA_LEN_SHF));
-+ /* statusMask = 0x00000010;*/
-+#else
-+ dprintf(4, "dslhal_support_unresetDsp()\n");
-+
-+ /* Bring the DSP core out of reset */
-+ /* DSLHAL_REG32(0xa8611600) = 0x00ff1bdf; */
-+ DSLHAL_REG32(0xa8611600) |= RST_CNTRL_PRCR_DSP;
-+ shim_osClockWait(64);
-+ dprintf(5,"Brought DSP out of Reset \n");
-+ dprintf(6,"Current Contents of PRCR: 0x%x\n",(unsigned int)DSLHAL_REG32(0xa8611600));
-+ /* DSLHAL_REG32(0xa8611a0c) = 0x00000007;
-+ shim_osClockWait(64); */
-+#endif
-+
-+ dprintf(4, "dslhal_support_unresetDsp() done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_resetDsp()
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction takes ax5 daugter board into reset.
-+*
-+* INPUT: None
-+*
-+* RETURN: 0 --successful.
-+* 1 --failed
-+*
-+*****************************************************************************************/
-+int dslhal_support_resetDsp(void)
-+{
-+ dprintf(4, "dslhal_support_resetDsp \n");
-+ /* Put ADSLSS into reset */
-+ DSLHAL_REG32(0xa8611600) &= ~RST_CNTRL_PRCR_DSP;
-+ shim_osClockWait(64);
-+ dprintf(4, "dslhal_support_resetDsp Done \n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_hostDspAddressTranslate()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Maps ax5 daugter card dsp memory address to avalanche memory space
-+*
-+* Input: unsigned int addr, dsp memory address.
-+*
-+* Return: >=0, unsigned int, mapped Avalanche address(VBUS address).
-+* -1, mapping failed
-+*
-+*
-+********************************************************************************************/
-+/* static unsigned int bbifmap0,bbifmap1; */
-+
-+unsigned int dslhal_support_hostDspAddressTranslate( unsigned int addr )
-+{
-+ unsigned int addrMap;
-+ /* This function should just be used to move the memory window of the ADSLSS */
-+ dprintf(5, "dslhal_support_hostDspAddressTranslate()\n");
-+
-+ /* select vbus to xbus memory */
-+ /* addrMap = addr & 0xff000000; */
-+ addrMap = addr & ADSLSSADRMASK;
-+
-+ DSLHAL_REG32(ADSLSSADR) = addrMap;
-+
-+ dprintf(6, "dslhal_support_hostDspAddressTranslate() done\n");
-+#ifdef PRE_SILICON
-+ return ((ADSLSS_BASE | (~ADSLSSADRMASK & addr))+ 0x00000100);
-+ /* Added 0x100 for Pre-Silicon VLNQ offset.. to be removed for Silicon */
-+#else
-+ return ((ADSLSS_BASE | (~ADSLSSADRMASK & addr)));
-+ /* Added 0x100 for Pre-Silicon VLNQ offset.. to be removed for Silicon */
-+#endif
-+
-+}
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_blockWrite
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This rouin simulates DSP memory write as done in ax5 pci nic card
-+*
-+* INPUT: void *buffer, data need to written
-+* void *adde, memory address to be written
-+* size_t count, number of bytes to be written
-+*
-+* RETURN: 0 --succeeded
-+* 1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_blockWrite(void *buffer, void *addr, size_t count)
-+{
-+ int rc, byteCnt=0;
-+ unsigned char* ptr;
-+ union
-+ {
-+ unsigned char *cptr;
-+ short *sptr;
-+ int *iptr;
-+ } src;
-+ union
-+ {
-+ int anint; /* DSP location */
-+ unsigned char *cptr; /* to avoid casts */
-+ } dst;
-+ union
-+ {
-+ unsigned int anint;
-+ unsigned char byte[4];
-+ }data,dword,sword;
-+
-+ /* Enter Critical Section */
-+ shim_osCriticalEnter();
-+
-+ dprintf(6, "dslhal_support_blockWrite\n");
-+
-+ dprintf(6,"addr=0x%X, length=0x%X, buffer=0x%X\n", (unsigned int) addr, (unsigned int) count, (unsigned int)buffer);
-+
-+ src.cptr = (unsigned char*) buffer; /* local buffer */
-+ dst.cptr = addr; /* DSP memory location */
-+
-+ /*Maps address first*/
-+ rc=dslhal_support_hostDspAddressTranslate((unsigned int)addr);
-+ dprintf(5, "NewAddr: %08x\n", rc);
-+ if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE)
-+ {
-+ dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
-+ return DSLHAL_ERROR_ADDRESS_TRANSLATE;
-+ }
-+
-+ dst.cptr=(unsigned char *)rc;
-+
-+ /* check wether address is at 32bits boundary */
-+
-+ if ((dst.anint & 0x3) && count)
-+ {
-+ sword.anint = *(unsigned int*)((unsigned int)src.cptr & 0xfffffffc);
-+ dword.anint = DSLHAL_REG32((unsigned int)dst.cptr & 0xfffffffc);
-+ sword.anint = (unsigned int) dslhal_support_byteSwap32(sword.anint);
-+ dword.anint = (unsigned int) dslhal_support_byteSwap32(dword.anint);
-+ ptr = (unsigned char *)((unsigned int)dst.cptr & 0xfffffffc);
-+
-+ if((dst.anint & 3) ==3) /* last byte of a dword */
-+ {
-+ dword.byte[3] = sword.byte[3];
-+ dst.anint++; /* bump the address by one */
-+ byteCnt++;
-+ count--;
-+ }
-+
-+ if((dst.anint & 3) ==1) /* second byte */
-+ {
-+ if(count>3)
-+ {
-+ dword.byte[3] = sword.byte[3];
-+ dst.anint++;
-+ count--;
-+ byteCnt++;
-+ }
-+ if(count>2)
-+ {
-+ dword.byte[2] = sword.byte[2];
-+ dst.anint++;
-+ count--;
-+ byteCnt++;
-+ }
-+ if(count)
-+ {
-+ dword.byte[1] = sword.byte[1];
-+ dst.anint++;
-+ count--;
-+ byteCnt++;
-+ }
-+ }
-+
-+ if((dst.anint & 3) && (count >1))
-+ {
-+ dword.byte[2] = sword.byte[2];
-+ dword.byte[3] = sword.byte[3];
-+ byteCnt+=2;
-+ dst.anint += 2; /* bump the address by two */
-+ count -= 2; /* decrement the byte count by two */
-+ }
-+
-+ if((dst.anint & 3) && (count==1))
-+ {
-+ dword.byte[2] = sword.byte[2];
-+ dst.anint++;
-+ byteCnt++;
-+ count--;
-+ }
-+ src.cptr = (char *)((unsigned int)src.cptr & 0xfffffffc); /* fix 032802 */
-+ dword.anint = dslhal_support_byteSwap32(dword.anint);
-+ DSLHAL_REG32((unsigned int)ptr) = dword.anint;
-+ ptr = src.cptr;
-+ for(rc=0;rc<count;rc++)
-+ {
-+ *ptr = *(ptr+byteCnt);
-+ ptr++;
-+ }
-+ }
-+
-+ /* the dst pointer should now be on a 32-bit boundary */
-+
-+ while (count > 3)
-+ {
-+ DSLHAL_REG32((unsigned int)dst.cptr) = dslhal_support_byteSwap32(*src.iptr);
-+ src.iptr++; /* bump the data pointer by four */
-+ dst.anint += 4; /* bump the address by four */
-+ count -= 4; /* decrement the byte count by four */
-+ }
-+
-+ /* write remaining bytes */
-+ if(count)
-+ {
-+ int i;
-+
-+ data.anint= DSLHAL_REG32((unsigned int)dst.cptr);
-+ data.anint=dslhal_support_byteSwap32(data.anint);
-+ for (i=0; i< count; i++)
-+ {
-+ data.byte[i]=*(src.cptr+i);
-+ }
-+ data.anint=dslhal_support_byteSwap32(data.anint);
-+ DSLHAL_REG32((unsigned int)dst.cptr) = data.anint;
-+ src.cptr +=count;
-+ dst.anint +=count;
-+ count=0;
-+ }
-+ dprintf(6, "dslhal_support_blockWrite done\n");
-+ /* Exit Critical Section */
-+ shim_osCriticalExit();
-+ return DSLHAL_ERROR_NO_ERRORS;
-+} /* end of dslhal_support_blockWrite() */
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_blockRead
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This rouin simulates DSP memory read as done in ax5 pci nic card
-+*
-+* INPUT: void *addr, memory address to be read
-+* void *buffer, dat buffer to be filled with from memmory
-+* size_t count, number of bytes to be written
-+*
-+* RETURN: 0 --succeeded
-+* 1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_blockRead(void *addr, void *buffer, size_t count)
-+{
-+ int rc;
-+ union
-+ {
-+ int anint; /* DSP location */
-+ char *cptr; /* to avoid casts */
-+ } src;
-+ union
-+ {
-+ char byte[4];
-+ int anint; /* DSP data */
-+ } data;
-+ union
-+ {
-+ char *cptr;
-+ int *iptr;
-+ } dst;
-+
-+ /* Enter Critical Section */
-+ shim_osCriticalEnter();
-+
-+ dprintf(6,"dslhal_support_blockRead\n");
-+
-+
-+ src.cptr = addr; /* DSP memory location */
-+ dst.cptr = buffer; /* local buffer */
-+
-+ dprintf(6, "Read addr=0x%X, size=0x%X\n", (unsigned int)addr, count);
-+
-+
-+ /*Maps address first*/
-+ rc=dslhal_support_hostDspAddressTranslate((unsigned int)addr);
-+ if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE)
-+ {
-+ dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n");
-+ return DSLHAL_ERROR_ADDRESS_TRANSLATE;
-+ }
-+
-+ src.cptr=(unsigned char *)rc;
-+
-+ /**********************************************
-+ * if the source is NOT on a 32-bit boundary *
-+ * then we read the full word *
-+ * and ignore the first part of it *
-+ **********************************************/
-+
-+ if ((src.anint & 3) && count)
-+ {
-+ unsigned int anword;
-+
-+ anword = DSLHAL_REG32((unsigned int)src.cptr & 0xfffffffc);
-+ data.anint = dslhal_support_byteSwap32(anword);
-+
-+ /************************************
-+ * there is no need for case 0 *
-+ * notice that there are no breaks *
-+ * each falls through to the next *
-+ ************************************/
-+
-+ switch (src.anint & 3)
-+ {
-+ case 1:
-+ /* use only byte[1-3] */
-+ *(dst.cptr++) = data.byte[1];
-+ src.anint++;
-+ count--;
-+ case 2:
-+ /* use byte[2-3] */
-+ if (count)
-+ {
-+ *(dst.cptr++) = data.byte[2];
-+ src.anint++;
-+ count--;
-+ }
-+ case 3:
-+ /* use byte[3] */
-+ if (count)
-+ {
-+ *(dst.cptr++) = data.byte[3];
-+ src.anint++;
-+ count--;
-+ }
-+ }
-+ }
-+
-+ /* the src pointer should now be on a 32-bit boundary */
-+ while (count > 3)
-+ {
-+ unsigned int anword;
-+
-+ anword=DSLHAL_REG32((unsigned int)src.cptr);
-+
-+ *dst.iptr = dslhal_support_byteSwap32(anword);
-+ src.anint += 4; /* bump the address by four */
-+ dst.iptr++; /* bump the data pointer by four */
-+ count -= 4; /* decrement the byte count by four */
-+ }
-+
-+ /*******************************
-+ * if there's any count left *
-+ * then we read the next word *
-+ * and ignore the end of it *
-+ *******************************/
-+ if (count)
-+ {
-+ unsigned int anword;
-+
-+ anword= DSLHAL_REG32((unsigned int)src.cptr);
-+ data.anint = dslhal_support_byteSwap32(anword);
-+
-+ /************************************
-+ * there is no need for case 0 *
-+ * notice that there are no breaks *
-+ * each falls through to the next *
-+ ************************************/
-+ switch (count)
-+ {
-+ case 1:
-+ /* use byte[0] */
-+ *(dst.cptr++) = data.byte[0];
-+ src.anint++;
-+ count--;
-+ break;
-+ case 2:
-+ /* use byte[0-1] */
-+ *(dst.cptr++) = data.byte[0];
-+ *(dst.cptr++) = data.byte[1];
-+ src.anint +=2;
-+ count -= 2;
-+ break;
-+ case 3:
-+ /* use only byte[0-2] */
-+ *(dst.cptr++) = data.byte[0];
-+ *(dst.cptr++) = data.byte[1];
-+ *(dst.cptr++) = data.byte[2];
-+ src.anint +=3;
-+ count -= 3;
-+ break;
-+ }
-+ }
-+ /* Exit Critical Section */
-+ shim_osCriticalExit();
-+
-+ return DSLHAL_ERROR_NO_ERRORS;
-+
-+} /* end of dslhal_support_blockRead() */
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_readDspMailbox
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Reads a message from the mailbox
-+*
-+* ARGUMENTS: int *pcmd Pointer to command read
-+*
-+* RETURNS: 0 if successful
-+* 1 if no mail
-+* NZ otherwise
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_readDspMailbox(tidsl_t *ptidsl, int *pcmd, int *ptag, int *pprm1, int *pprm2)
-+{
-+ int rc;
-+ int cmd;
-+ int tag;
-+ int prm1;
-+ int prm2;
-+ unsigned char dspOutInx;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ DEV_HOST_mailboxControl_t mailboxControl;
-+ DEV_HOST_dspHostMsg_t dspMailboxMsg[DEV_HOST_DSPQUEUE_LENGTH];
-+
-+ dprintf(6,"dslhal_support_readDspMailbox\n");
-+
-+ /* get the DSP main pointer */
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,
-+ sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ /* Read in the command/response buffer */
-+ dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p);
-+
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p,
-+ &mailboxControl, sizeof(DEV_HOST_mailboxControl_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ /* Change the endianness of the Mailbox Pointer */
-+ mailboxControl.dspMsgBuf_p = (DEV_HOST_dspHostMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.dspMsgBuf_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)mailboxControl.dspMsgBuf_p,
-+ &dspMailboxMsg, (sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_DSPQUEUE_LENGTH));
-+
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ /* Extract the command/response message index */
-+ mailboxControl.hostInInx &= 7;
-+ mailboxControl.hostOutInx &= 7;
-+ mailboxControl.dspOutInx &= 7;
-+ mailboxControl.dspInInx &= 7;
-+
-+
-+ /* check for messages in the mailbox */
-+
-+ if (mailboxControl.dspOutInx == mailboxControl.dspInInx)
-+ {
-+ return DSLHAL_ERROR_MAILBOX_NOMAIL;
-+ /* no messages to read */
-+ }
-+
-+ /* use bDRESPOutInx as index to DRESPMsgBuf */
-+
-+ cmd = dspMailboxMsg[mailboxControl.dspOutInx].cmd;
-+ tag = dspMailboxMsg[mailboxControl.dspOutInx].tag;
-+ prm1= dspMailboxMsg[mailboxControl.dspOutInx].param1;
-+ prm2= dspMailboxMsg[mailboxControl.dspOutInx].param2;
-+
-+ mailboxControl.dspOutInx++; /* increment count */
-+ mailboxControl.dspOutInx &= 7; /* only two bits */
-+
-+ dspOutInx = mailboxControl.dspOutInx;
-+
-+ /* Read in the command response buffer again to take care of changes */
-+ mailboxControl.dspOutInx = dspOutInx;
-+ rc = dslhal_support_blockWrite(&mailboxControl.dspOutInx,
-+ &dspOamSharedInterface.dspHostMailboxControl_p->dspOutInx, sizeof(BYTE));
-+
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_WRITE;
-+
-+ /* Is the input parameter address non-zero*/
-+
-+ if (pcmd)
-+ {
-+ *pcmd = cmd;
-+ }
-+ if (ptag)
-+ {
-+ *ptag = tag;
-+ }
-+ if (pprm1)
-+ {
-+ *pprm1 = prm1;
-+ }
-+ if (pprm2)
-+ {
-+ *pprm2 = prm2;
-+ }
-+
-+ dprintf(6,"dslhal_support_readDspMailbox done\n");
-+ dprintf(6,"cmd=%d, tag=%d\n", cmd, tag);
-+ dprintf(6,"dslhal_support_readDspMailbox:cmd: 0x%x, tag=%d\n", cmd, tag);
-+ return DSLHAL_ERROR_NO_ERRORS;
-+
-+} /* end of dslhal_support_readDspMailbox() */
-+
-+/*******************************************************************************************
-+* FUNCTION NAME: dslhal_support_writeHostMailbox
-+*
-+********************************************************************************************
-+* DESCRIPTION: Send a message to a mailbox
-+*
-+* ARGUMENTS: int cmd command to write
-+* int tag tag (currently unused)
-+* int p1 parameter 1 (currently unused)
-+* int p2 parameter 2 (currently unused)
-+*
-+* RETURNS: 0 if successful
-+* NZ otherwise
-+*
-+*******************************************************************************************/
-+
-+int dslhal_support_writeHostMailbox(tidsl_t *ptidsl, int cmd, int tag, int p1, int p2)
-+{
-+ int rc;
-+ int index;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ DEV_HOST_mailboxControl_t mailboxControl;
-+ DEV_HOST_dspHostMsg_t hostMailboxMsg[DEV_HOST_HOSTQUEUE_LENGTH];
-+ unsigned char hostInInx;
-+
-+ dprintf(6,"dslhal_support_writeHostMailbox:cmd: 0x%x, tag=%d\n", cmd, tag);
-+
-+ dprintf(6,"cmd=%d, tag=%d\n", cmd, tag);
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,
-+ sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ /* Read in the command/response buffer */
-+ dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p,
-+ &mailboxControl, sizeof(DEV_HOST_mailboxControl_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ /* Change the endianness of the Mailbox Control Pointer */
-+ mailboxControl.hostMsgBuf_p = (DEV_HOST_dspHostMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.hostMsgBuf_p);
-+ rc = dslhal_support_blockRead((PVOID)mailboxControl.hostMsgBuf_p,
-+ &hostMailboxMsg, (sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_HOSTQUEUE_LENGTH));
-+
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ /* Extract the command/response message index */
-+ mailboxControl.hostInInx &= 7;
-+ mailboxControl.hostOutInx &= 7;
-+ mailboxControl.dspOutInx &= 7;
-+ mailboxControl.dspInInx &= 7;
-+
-+ /* make sure there's room in the mailbox */
-+
-+ index = mailboxControl.hostInInx;
-+ mailboxControl.hostInInx++;
-+ mailboxControl.hostInInx &= 7;
-+ hostInInx = mailboxControl.hostInInx;
-+ if (mailboxControl.hostInInx == mailboxControl.hostOutInx)
-+ {
-+ /* mailbox is full */
-+ return DSLHAL_ERROR_MAILBOX_OVERFLOW;
-+ }
-+
-+ /* use bOCMDInInx as index to OCMDMsgBuf */
-+ hostMailboxMsg[index].cmd = (BYTE) cmd;
-+ hostMailboxMsg[index].tag = (BYTE) tag;
-+ hostMailboxMsg[index].param1 = (BYTE) p1;
-+ hostMailboxMsg[index].param2 = (BYTE) p2;
-+ rc = dslhal_support_blockWrite(&hostMailboxMsg,
-+ (PVOID)mailboxControl.hostMsgBuf_p,
-+ sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_HOSTQUEUE_LENGTH);
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockWrite failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ rc = dslhal_support_blockWrite(&mailboxControl,
-+ &dspOamSharedInterface.dspHostMailboxControl_p,
-+ sizeof(DEV_HOST_mailboxControl_t));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_WRITE;
-+ /* update the index */
-+ mailboxControl.hostInInx = hostInInx;
-+ rc = dslhal_support_blockWrite(&mailboxControl.hostInInx,
-+ &dspOamSharedInterface.dspHostMailboxControl_p->hostInInx,
-+ sizeof(BYTE));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_WRITE;
-+
-+ dprintf(6,"dslhal_support_writeHostMailbox done\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+
-+}
-+/* end of dslhal_support_writeHostMailbox() */
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_readTextMailbox
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Reads a message from the mailbox
-+*
-+* ARGUMENTS: int *pcmd Pointer to command read
-+*
-+* RETURNS: 0 if successful
-+* 1 if no mail
-+* NZ otherwise
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_readTextMailbox(tidsl_t *ptidsl, int *pmsg1, int *pmsg2)
-+{
-+ int rc;
-+ unsigned int msg1;
-+ unsigned int msg2;
-+ unsigned char textOutInx;
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ DEV_HOST_mailboxControl_t mailboxControl;
-+ DEV_HOST_textMsg_t textMailboxMsg[DEV_HOST_TEXTQUEUE_LENGTH];
-+
-+ dprintf(6,"dslhal_support_readTextMailbox\n");
-+
-+ /* get the DSP main pointer */
-+
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr;
-+
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,
-+ sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ /* Read in the command/response buffer */
-+ dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p);
-+
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p,
-+ &mailboxControl, sizeof(DEV_HOST_mailboxControl_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ /* Change the endianness of the Mailbox Pointer */
-+ mailboxControl.textMsgBuf_p = (DEV_HOST_textMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.textMsgBuf_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)mailboxControl.textMsgBuf_p,
-+ &textMailboxMsg, (sizeof(DEV_HOST_textMsg_t)*DEV_HOST_DSPQUEUE_LENGTH));
-+
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ /* Extract the command/response message index */
-+
-+ mailboxControl.textInInx &= 7;
-+ mailboxControl.textOutInx &= 7;
-+
-+ /* check for messages in the mailbox */
-+
-+ if (mailboxControl.textOutInx == mailboxControl.textInInx)
-+ {
-+ return DSLHAL_ERROR_MAILBOX_NOMAIL;
-+ /* no messages to read */
-+ }
-+
-+ /* use bDRESPOutInx as index to DRESPMsgBuf */
-+
-+ msg1 = textMailboxMsg[mailboxControl.textOutInx].msgPart1;
-+ msg2 = textMailboxMsg[mailboxControl.textOutInx].msgPart2;
-+ msg1 = (unsigned int) dslhal_support_byteSwap32((unsigned int)msg1);
-+ msg2 = (unsigned int) dslhal_support_byteSwap32((unsigned int)msg2);
-+
-+ mailboxControl.textOutInx++; /* increment count */
-+ mailboxControl.textOutInx &= 7; /* only two bits */
-+
-+ textOutInx = mailboxControl.textOutInx;
-+
-+ /* Read in the command response buffer again to take care of changes */
-+
-+ mailboxControl.textOutInx = textOutInx;
-+
-+ rc = dslhal_support_blockWrite(&mailboxControl.textOutInx,
-+ &dspOamSharedInterface.dspHostMailboxControl_p->textOutInx, sizeof(BYTE));
-+
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_WRITE;
-+
-+ /* Is the input parameter address non-zero*/
-+
-+ if (pmsg1)
-+ {
-+ *pmsg1 = msg1;
-+ }
-+ if (pmsg2)
-+ {
-+ *pmsg2 = msg2;
-+ }
-+
-+ dprintf(6,"dslhal_support_readTextMailbox done\n");
-+ dprintf(6,"msgPart1=%d, msgPart2=%d\n", msg1, msg2);
-+ dprintf(6,"dslhal_support_readTextMailbox:Message Part1: 0x%x, tag=0x%x\n", msg1, msg2);
-+ return DSLHAL_ERROR_NO_ERRORS;
-+
-+} /* end of dslhal_support_readTextMailbox() */
-+
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_hostDspCodeDownload()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* download DSP image from host memory to dsp memory
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_hostDspCodeDownload(tidsl_t * ptidsl)
-+{
-+
-+ unsigned int index;
-+ int rc = 0, i;
-+ unsigned char *iptr; /* image pointer */
-+ unsigned int numbytes,olayXfer,olayStore;
-+ /* unsigned int holdSecPhyAddr=0,holdSecVirtAddr; */
-+ unsigned int *olayStart;
-+ size_t len; /* size of the file */
-+ size_t expoffset; /* expected offset for next section header */
-+ unsigned short checksum;
-+ unsigned int crc32;
-+ unsigned char * image;
-+ char *tmp = (char *)DEV_HOST_DSP_OAM_POINTER_LOCATION;
-+ DEV_HOST_dspVersionDef_t dspVersion;
-+#if SWTC
-+ DEV_HOST_tcHostCommDef_t TCHostCommDef;
-+#endif
-+ DEV_HOST_oamWrNegoParaDef_t OamWrNegoParaDef;
-+ DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface, *pdspOamSharedInterface;
-+ DEV_HOST_olayDpDef_t olayDpParms;
-+ DEV_HOST_profileBase_t profileList;
-+#ifndef NO_ACT
-+ DEV_HOST_consBufDef_t constDisp;
-+#endif
-+#if CO_PROFILES
-+ DEV_HOST_coData_t coData;
-+#endif
-+ DEV_HOST_olayDpPageDef_t olayDpPageDef[NUM_PAGES];
-+ union
-+ {
-+ char byte[4];
-+ unsigned short hword[2];
-+ unsigned int aword;
-+ } data;
-+
-+ struct _header
-+ {
-+ char signature[6];
-+ unsigned short sectcount;
-+ unsigned int length;
-+ } header;
-+
-+ struct _section
-+ {
-+ unsigned int addr;
-+ unsigned int length;
-+ unsigned int offset;
-+ unsigned int page;
-+ };/* section[MAXSECTIONS]; */
-+
-+ struct _section *sptr;
-+ unsigned int secAddr, secLength, secOffset, secPage;
-+
-+
-+ dprintf(5,"dslhal_support_hostDspCodeDownload\n");
-+ image = ptidsl->fwimage;
-+
-+ if (!image)
-+ {
-+ dprintf(1,"no image file\n");
-+ return DSLHAL_ERROR_NO_FIRMWARE_IMAGE;
-+ }
-+
-+ iptr=image;
-+
-+ numbytes = sizeof(header);
-+
-+ shim_osMoveMemory((char *) &header, (char *)iptr, numbytes);
-+ header.length = dslhal_support_byteSwap32(header.length);
-+ header.sectcount = dslhal_support_byteSwap16(header.sectcount);
-+#if 0
-+ crc32 = dslhal_support_computeCrc32((unsigned char*)&crcTest[0],20);
-+ dprintf(6,"CRC-32 for the crcTest: 0x%x",crc32);
-+ dprintf(4,"header.length=%d, header.sectcount=0x%X\n", header.length, header.sectcount);
-+#endif
-+ /* point to the checksum */
-+ /* compute the checksum on CRC32 here */
-+ iptr = image + header.length-4;
-+ numbytes = sizeof(data.aword);
-+
-+ dprintf(5,"tiload: check checksum\n");
-+ shim_osMoveMemory((char *)&(data.byte), (char *)iptr, numbytes);
-+
-+ crc32 = dslhal_support_computeCrc32(image,ptidsl->imagesize);
-+ dprintf(5,"CRC-32 for the Binary: 0x%x",crc32);
-+ /* CRC currently not added to the DSP binary, so this code is commented out */
-+ /*
-+ data.aword = dslhal_support_byteSwap32(data.aword);
-+ if (data.aword != crc32)
-+ {
-+ dprintf(1,"Checksum error\n");
-+ }
-+ */
-+ /* Verify signature - Changed from "320C6x" to "TIDSL" for load 80 */
-+
-+ header.signature[5]='\0';
-+ dprintf(5, "signature=%s\n", header.signature);
-+
-+ if (shim_osStringCmp(header.signature, "TIDSL"))
-+ {
-+ dprintf(1,"Signature not match\n");
-+ return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+ }
-+
-+ dprintf(5,"tiload: check sect count\n");
-+ /* check section count */
-+
-+ if (header.sectcount > MAXSECTIONS)
-+ {
-+ dprintf(1,"Section # %d exceeds max %d\n", header.sectcount, MAXSECTIONS);
-+ return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+ }
-+ else
-+ {
-+ dprintf(5,"found %d sections\n", header.sectcount);
-+ }
-+
-+ /* Validation of Section offsets */
-+
-+ /* point to the first section */
-+ len = header.length; /* file size in bytes */
-+ expoffset = sizeof(struct _header) + header.sectcount * sizeof(struct _section);
-+
-+ dprintf(5,"tiload: check offset\n");
-+ for (index=0; index<header.sectcount; index++) /* parse the sections one by one */
-+ {
-+ numbytes = sizeof(struct _header) + index * sizeof(struct _section); /* Compute Section Offset */
-+ sptr = (struct _section *)(image + numbytes); /* Section Pointer to beginning of the section */
-+
-+ secAddr = dslhal_support_byteSwap32(sptr->addr);
-+ secOffset = dslhal_support_byteSwap32(sptr->offset);
-+ secLength = dslhal_support_byteSwap32(sptr->length);
-+ secPage = dslhal_support_byteSwap32(sptr->page);
-+
-+ /* validate offset */
-+ if ( secOffset== 0xffffffff)
-+ {
-+ /* special case: zero fill */
-+ /* offset is valid, don't change expoffset */
-+ }
-+ else
-+ {
-+ if (secOffset > len-4)
-+ {
-+ dprintf(5,"Offset error\n");
-+ return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+ }
-+
-+ /* determine expected offset of NEXT section */
-+ expoffset = secLength + secOffset;
-+
-+ /* all addresses must be on word boundaries */
-+ if (secAddr & 3)
-+ {
-+
-+ }
-+ }
-+ }
-+
-+ /* check final offset - should just be a checksum left */
-+/* IMPORTANT 11/24/02 --> Got this error... but bypassed for Pf of Concept*/
-+ /*
-+ if (expoffset != len-4)
-+ {
-+ dprintf(5,"Final offset error\n");
-+ return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+ }
-+ */
-+
-+ /* Actual Code loading to DSP Memory */
-+
-+ /* Initialize DSP Data Memory before code load*/
-+ dprintf(5,"Zero Prefill DSP DMEM\n");
-+ DSLHAL_REG32(ADSLSSADR)=0x80000000;
-+ shim_osZeroMemory((char *)0xa1000000, 0x10000);
-+ /* Load sections from the image */
-+ for (index=0; index<header.sectcount; index++) /* Parse each section */
-+ {
-+ numbytes = sizeof(header) + index * sizeof(struct _section); /* Compute offset to next section */
-+ sptr = (struct _section *)(image + numbytes); /* Point to next section */
-+
-+ secAddr = dslhal_support_byteSwap32(sptr->addr);
-+ secOffset = dslhal_support_byteSwap32(sptr->offset);
-+ secLength = dslhal_support_byteSwap32(sptr->length);
-+ secPage = dslhal_support_byteSwap32(sptr->page);
-+
-+ data.aword = secAddr;
-+ checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
-+
-+ data.aword = secLength;
-+ checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
-+
-+ data.aword = secOffset;
-+ checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
-+
-+ data.aword = secPage;
-+ checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3];
-+
-+
-+ /* validate offset */
-+ if (secOffset == 0xffffffff)
-+ {
-+ /* special case: zero fill */
-+ /* offset is valid, don't change expoffset */
-+ }
-+ else
-+ {
-+ /* real offset */
-+ if(secOffset > len-4)
-+ {
-+ dprintf(5,"section[%u] offset too big (%X/%X)\n", index,
-+ secOffset, len-4);
-+
-+ return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+ }
-+
-+ /* determine expected offset of NEXT section */
-+ expoffset = secLength + secOffset;
-+
-+ }
-+
-+ }
-+
-+ /* check final offset - should just be a checksum left */
-+ /*
-+ if(expoffset != len-4)
-+ {
-+ dprintf(1,"sections don't span full file (%X/%X)\n",expoffset,len-2);
-+ return DSLHAL_ERROR_FIRMWARE_OFFSET;
-+ }
-+ */
-+ dprintf(5,"tiload: load binary\n");
-+
-+ for (index=0; index<header.sectcount; index++)
-+ {
-+ numbytes = sizeof(header) + index * sizeof(struct _section);
-+ sptr = (struct _section *)(image + numbytes);
-+
-+ secAddr = dslhal_support_byteSwap32(sptr->addr);
-+ secOffset = dslhal_support_byteSwap32(sptr->offset);
-+ secLength = dslhal_support_byteSwap32(sptr->length);
-+ secPage = dslhal_support_byteSwap32(sptr->page);
-+ dprintf(5,"loading section %u\n", index);
-+ dprintf(5,"section %u: addr: %X\n", index, secAddr);
-+ dprintf(5,"section %u: length: %X\n", index, secLength);
-+ dprintf(5,"section %u: offset: %X\n", index, secOffset);
-+ dprintf(5,"section %u: page: %X\n", index, secPage);
-+
-+ /* point to the section's data */
-+ if(secOffset != 0xffffffff)
-+ {
-+ /* Load this section of data */
-+ iptr = image + secOffset;
-+ dprintf(6, "iptr %8x\n", (unsigned int)iptr);
-+ }
-+
-+ if(secPage)
-+ {
-+ dprintf(6,"OVERLAY PAGE #%d\n",secPage);
-+ /* overlay page, don't write to dsp yet, save into host memory*/
-+
-+ dprintf(6,"Section Length: %d \n",secLength);
-+ ptidsl->olayDpPage[secPage].PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength);
-+ if(ptidsl->olayDpPage[secPage].PmemStartWtAddr == NULL)
-+ {
-+ dprintf(1, "overlay page allocate error\n");
-+ return DSLHAL_ERROR_OVERLAY_MALLOC;
-+ }
-+#ifdef PRE_SILICON
-+ ptidsl->olayDpPage[secPage].overlayHostAddr = ((((ptidsl->olayDpPage[secPage].PmemStartWtAddr)-0x84000000)-0x10000000)+0x030b0000);
-+#else
-+ /* ptidsl->olayDpPage[secPage].overlayHostAddr = ((unsigned int)(ptidsl->olayDpPage[secPage].PmemStartWtAddr)&~0xe0000000); */
-+ ptidsl->olayDpPage[secPage].overlayHostAddr = virtual2Physical((unsigned int)ptidsl->olayDpPage[secPage].PmemStartWtAddr);
-+#endif
-+ dprintf(6,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->olayDpPage[secPage].PmemStartWtAddr,ptidsl->olayDpPage[secPage].overlayHostAddr);
-+
-+ ptidsl->olayDpPage[secPage].overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->olayDpPage[secPage].overlayHostAddr);
-+ ptidsl->olayDpPage[secPage].OverlayXferCount = secLength;
-+ ptidsl->olayDpPage[secPage].BinAddr = secAddr;
-+ ptidsl->olayDpPage[secPage].SecOffset = secOffset;
-+ shim_osMoveMemory((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, (char *)iptr, secLength);
-+ /* RamP Image ByteSwap test */
-+ olayStart = (unsigned int *)ptidsl->olayDpPage[secPage].PmemStartWtAddr;
-+
-+ for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
-+ {
-+ olayStore = *(unsigned int *)olayStart;
-+ olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
-+ *(unsigned int*)olayStart = olayStore;
-+ dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
-+ olayStart++;
-+ olayStore=0;
-+ }
-+ /* RamP Image ByteSwap test */
-+ /* compute the CRC of each overlay page and Store the Checksum in a local global variable */
-+ /* This Value of CRC is to be compared with the header where all the CRC bytes are lumped together */
-+ ptidsl->olayDpPage[secPage].olayPageCrc32 = dslhal_support_computeCrc32((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, ptidsl->olayDpPage[secPage].OverlayXferCount);
-+
-+ shim_osWriteBackCache((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, secLength);
-+ }
-+ else
-+ {
-+ rc = secAddr&0xff000000;
-+ if(rc && rc!=0x80000000)
-+ {
-+ dprintf(4,"Not DSP PMEM/DMEM\n");
-+ /* don't write to dsp, save into host memory*/
-+ dprintf(4,"Section Addr: %x Section Length: %d \n",secAddr,secLength);
-+ ptidsl->coProfiles.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength);
-+ if(ptidsl->coProfiles.PmemStartWtAddr == NULL)
-+ {
-+ dprintf(1, "memory allocate error\n");
-+ return DSLHAL_ERROR_OVERLAY_MALLOC;
-+ }
-+ ptidsl->coProfiles.overlayHostAddr = virtual2Physical((unsigned int)ptidsl->coProfiles.PmemStartWtAddr);
-+ dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.overlayHostAddr);
-+ ptidsl->coProfiles.overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->coProfiles.overlayHostAddr);
-+ ptidsl->coProfiles.OverlayXferCount = secLength;
-+ ptidsl->coProfiles.BinAddr = secAddr;
-+ ptidsl->coProfiles.SecOffset = secOffset;
-+
-+ shim_osMoveMemory((char *)ptidsl->coProfiles.PmemStartWtAddr, (char *)iptr, secLength);
-+ /* RamP Image ByteSwap test */
-+ olayStart = (unsigned int *)ptidsl->coProfiles.PmemStartWtAddr;
-+
-+ for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
-+ {
-+ olayStore = *(unsigned int *)olayStart;
-+ olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
-+ *(unsigned int*)olayStart = olayStore;
-+ dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
-+ olayStart++;
-+ olayStore=0;
-+ }
-+ shim_osWriteBackCache((void *)ptidsl->coProfiles.PmemStartWtAddr, secLength);
-+ }
-+ else
-+ {
-+ /* IMPORTANT: write image to DSP memory */
-+ rc=dslhal_support_blockWrite((void *)iptr, (void *)secAddr, secLength);
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ shim_osClockWait(0x50000);
-+ /*
-+ rc=dslhal_support_blockRead((void*)secAddr, (void*)tmpBuffer, secLength);
-+ if(rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ for(i=0;i<secLength;i++)
-+ {
-+ if(*iptr
-+ }*/
-+ }
-+ }
-+ } /* end of write dsp image */
-+
-+ /***********************************************************************************
-+ * Start to fillup various values to our hardware structure for late use
-+ ************************************************************************************/
-+
-+ /* get main pointer for data */
-+
-+ rc = dslhal_support_blockRead(tmp, &pdspOamSharedInterface, sizeof(unsigned int));
-+ dprintf(5, "tmp=0x%X, addr=0x%X\n", (unsigned int)tmp, (unsigned int)pdspOamSharedInterface);
-+ pdspOamSharedInterface= (DEV_HOST_dspOamSharedInterface_t *)dslhal_support_byteSwap32((unsigned int)pdspOamSharedInterface);
-+ dprintf(5, "tmp=0x%X, addr=0x%X\n", (unsigned int)tmp, (unsigned int)pdspOamSharedInterface);
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ if(!pdspOamSharedInterface)
-+ {
-+ dprintf(1,"Couldn't read main pointer\n");
-+ return DSLHAL_ERROR_INVALID_PARAM;
-+ }
-+
-+ ptidsl->pmainAddr=pdspOamSharedInterface;
-+
-+ /* read the OamSharedInterfaceStructure */
-+
-+ dprintf(5,"ptidsl->hostIf.mainAddr=0x%X\n", (unsigned int)ptidsl->pmainAddr);
-+
-+ /* get the pointer to DSP-OAM Shared Interface */
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,
-+ sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ /* Communicate the Allocated Memory Address to DSP to choose CO Profiles */
-+
-+ /* Change the Endianness of the profileList pointer */
-+ dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p);
-+ /* Access the profileList Structure */
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ dprintf(2,"Old Addr:%x New: %x \n",profileList.hostProfileBase_p,ptidsl->coProfiles.overlayHostAddr);
-+ profileList.hostProfileBase_p = (DEV_HOST_coData_t *)ptidsl->coProfiles.overlayHostAddr;
-+ rc = dslhal_support_blockWrite(&profileList,(PVOID)dspOamSharedInterface.profileList_p,sizeof(DEV_HOST_profileBase_t));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_WRITE;
-+
-+ /* Communicate the Allocated Memory Address to DSP to do overlays */
-+
-+ /* Change the Endianness of the olayDpDef pointer */
-+ dspOamSharedInterface.olayDpParms_p = (DEV_HOST_olayDpDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.olayDpParms_p);
-+ /* Access the olayDpDef Structure */
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.olayDpParms_p,&olayDpParms, sizeof(DEV_HOST_olayDpDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+
-+ for(i=1;i<NUM_PAGES;i++)
-+ {
-+ /* Change the endianness of the olayDpPageDef Pointer */
-+ olayDpParms.olayDpPage_p[i] = (DEV_HOST_olayDpPageDef_t *) dslhal_support_byteSwap32((unsigned int)olayDpParms.olayDpPage_p[i]);
-+ /* Access the olayDpPageDef Structure */
-+ rc = dslhal_support_blockRead((PVOID)olayDpParms.olayDpPage_p[i],&olayDpPageDef[i],sizeof(DEV_HOST_olayDpPageDef_t));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ olayDpPageDef[i].overlayHostAddr = ptidsl->olayDpPage[i].overlayHostAddr;
-+ rc = dslhal_support_blockWrite(&olayDpPageDef[i],(PVOID)olayDpParms.olayDpPage_p[i],sizeof(DEV_HOST_olayDpPageDef_t));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_WRITE;
-+ }
-+
-+ /* Change the endianness of the Datapump Version Pointer */
-+ dspOamSharedInterface.datapumpVersion_p = (DEV_HOST_dspVersionDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.datapumpVersion_p);
-+
-+ /* get DSPVersion itself */
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.datapumpVersion_p,&dspVersion, sizeof(DEV_HOST_dspVersionDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ /* table_dsp info */
-+#if SWTC
-+ dspOamSharedInterface.tcHostComm_p = (DEV_HOST_tcHostCommDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p);
-+ rc = dslhal_support_blockRead(&pdspOamSharedInterface->tcHostComm_p,
-+ &pTCHostCommDef, 4);
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ pTCHostCommDef=(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)pTCHostCommDef);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p,
-+ &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+#endif
-+ /* Select the Multimode Training */
-+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p);
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.oamWriteNegoParams_p, &OamWrNegoParaDef, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+switch(dspVersion.netService)
-+ {
-+ case 1: OamWrNegoParaDef.stdMode = MULTI_MODE;
-+ dprintf(5,"POTS Service \n");
-+ ptidsl->netService = 1;
-+ break;
-+ case 2: OamWrNegoParaDef.stdMode = GDMT_MODE;
-+ dprintf(5,"ISDN Service \n");
-+ ptidsl->netService = 2;
-+ break;
-+ default: OamWrNegoParaDef.stdMode = T1413_MODE;
-+ dprintf(5,"Default Service \n");
-+ break;
-+ }
-+
-+ ptidsl->AppData.StdMode = (unsigned int)OamWrNegoParaDef.stdMode;
-+
-+ OamWrNegoParaDef.oamFeature = dslhal_support_byteSwap32((OAMFEATURE_TC_SYNC_DETECT_MASK));
-+ /* Set the flag to start retraining if the margin of the modem drops below
-+ default margin during showtime */
-+
-+ OamWrNegoParaDef.marginMonitorShwtme = FALSE;
-+ /* Set the flag to start retraining if the margin of the modem drops below default margin during training */
-+
-+ OamWrNegoParaDef.marginMonitorTrning = FALSE;
-+ OamWrNegoParaDef.dsToneTurnoff_f = 0;
-+ dslhal_support_blockWrite(&OamWrNegoParaDef,
-+ (PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t));
-+ rc=dslhal_support_setInterruptMask(ptidsl,0);
-+ if(rc!=DSLHAL_ERROR_NO_ERRORS)
-+ return rc;
-+ /* Co Profile Test */
-+#if CO_PROFILES
-+ dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p);
-+ /* Access the profileList Structure */
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ profileList.hostProfileBase_p = (DEV_HOST_coData_t *)dslhal_support_byteSwap32((unsigned int)profileList.hostProfileBase_p);
-+ rc = dslhal_support_blockRead((PVOID)profileList.hostProfileBase_p,&coData, sizeof(DEV_HOST_coData_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ dprintf(2,"Current Profile Vendor Id: %x \n",coData.phyAgcPgaTarget);
-+ coData.phyAgcPgaTarget = 0xcaba;
-+ rc = dslhal_support_blockWrite(&coData,(PVOID)profileList.hostProfileBase_p,sizeof(DEV_HOST_coData_t));
-+ if(rc)
-+ return DSLHAL_ERROR_BLOCK_WRITE;
-+#endif
-+ /* End of CO Profile Test */
-+
-+#ifndef NO_ACT
-+ /* Constellation Display Buffer Allocate */
-+ ptidsl->constDisplay.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(DSP_CONSTELLATION_BUFFER_SIZE);
-+ if(ptidsl->constDisplay.PmemStartWtAddr == NULL)
-+ {
-+ dprintf(1, "memory allocate error\n");
-+ return DSLHAL_ERROR_OVERLAY_MALLOC;
-+ }
-+ shim_osZeroMemory((void*)ptidsl->constDisplay.PmemStartWtAddr,DSP_CONSTELLATION_BUFFER_SIZE);
-+ ptidsl->constDisplay.overlayHostAddr = virtual2Physical((unsigned int)ptidsl->constDisplay.PmemStartWtAddr);
-+ dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.overlayHostAddr);
-+ ptidsl->constDisplay.OverlayXferCount = DSP_CONSTELLATION_BUFFER_SIZE;
-+
-+ /* Communicate the Allocated Buffer for DSP load Constellation Data */
-+
-+ /* Change the Endianness of the profileList pointer */
-+ dspOamSharedInterface.consDispVar_p = (DEV_HOST_consBufDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.consDispVar_p);
-+ /* Access the profileList Structure */
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.consDispVar_p,&constDisp, sizeof(DEV_HOST_consBufDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ dprintf(2,"Constellation Old Addr:%x New: %x \n",constDisp.consDispStartAddr,ptidsl->constDisplay.overlayHostAddr);
-+ constDisp.consDispStartAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->constDisplay.overlayHostAddr);
-+ constDisp.consDispCurrentAddr = constDisp.consDispStartAddr;
-+ constDisp.consDispBufLen = (unsigned int)dslhal_support_byteSwap32(DSP_CONSTELLATION_BUFFER_SIZE);
-+ rc = dslhal_support_blockWrite(&constDisp,(PVOID)dspOamSharedInterface.consDispVar_p,sizeof(DEV_HOST_consBufDef_t));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_WRITE;
-+#endif
-+ dprintf(5,"dslhal_support_hostDspCodeDownload() completed.\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+
-+} /* end of dslhal_support_hostDspCodeDownload() */
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_readDelineationState()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* download DSP image from host memory to dsp memory
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_readDelineationState(tidsl_t * ptidsl)
-+{
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ DEV_HOST_atmStats_t atmStats;
-+ DEV_HOST_dsAtmStats_t dsAtmStats0;
-+ unsigned int rc=0, delinState=0;
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t)));
-+
-+ if (rc)
-+ return rc;
-+ delinState = dslhal_support_byteSwap32(dsAtmStats0.delineationState);
-+ if(delinState == TC_SYNC)
-+ ptidsl->lConnected = 1;
-+ else
-+ ptidsl->lConnected = 0;
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_processModemStateBitField()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* download DSP image from host memory to dsp memory
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_processModemStateBitField(tidsl_t * ptidsl)
-+{
-+ int rc, offset[2]={2,0};
-+ int modemStateBitFields[NUMBER_OF_BITFIELDS],changedField=0;
-+ rc = dslhal_api_dspInterfaceRead(ptidsl,(unsigned int)ptidsl->pmainAddr,2,(unsigned int *)&offset,
-+ (unsigned char *)&modemStateBitFields,NUMBER_OF_BITFIELDS*sizeof(int));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ for(rc=0;rc<NUMBER_OF_BITFIELDS;rc++)
-+ dprintf(4,"Bit Field %d: 0x%x \n",rc+1,dslhal_support_byteSwap32((unsigned int)modemStateBitFields[rc]));
-+
-+ for(rc=NUMBER_OF_BITFIELDS;rc>0;rc--)
-+ {
-+ if(ptidsl->modemStateBitField[rc-1]!=modemStateBitFields[rc-1])
-+ {
-+ changedField = rc;
-+ break;
-+ }
-+ }
-+ if(changedField)
-+ {
-+ for(rc=0;rc<32;rc++)
-+ {
-+ if(modemStateBitFields[changedField-1] & dslhal_support_byteSwap32((BITFIELD_SCAN >> rc)))
-+ break;
-+ }
-+ dprintf(5,"Changed Field : %d Changed Bit : %d \n",changedField,(31-rc));
-+ ptidsl->rState = ((changedField*100) + (31-rc));
-+ dprintf(5,"Modem State : %d \n",ptidsl->rState);
-+ shim_osMoveMemory((void *)ptidsl->modemStateBitField,(void *)modemStateBitFields, 4*NUMBER_OF_BITFIELDS);
-+ }
-+
-+ switch(changedField)
-+ {
-+ case 1: if((ptidsl->rState >= ATU_RIDLE) && (ptidsl->AppData.bState < RSTATE_IDLE))
-+ ptidsl->AppData.bState = RSTATE_IDLE;
-+ if((ptidsl->rState >= GDMT_NSFLR) && (ptidsl->AppData.bState < RSTATE_INIT))
-+ ptidsl->AppData.bState = RSTATE_INIT;
-+ if((ptidsl->rState >= GDMT_ACKX) && (ptidsl->AppData.bState < RSTATE_HS))
-+ ptidsl->AppData.bState = RSTATE_HS;
-+ break;
-+
-+ case 2: if((ptidsl->rState >= T1413_NSFLR) && (ptidsl->AppData.bState < RSTATE_INIT))
-+ ptidsl->AppData.bState = RSTATE_INIT;
-+ if((ptidsl->rState >= T1413_ACKX) && (ptidsl->AppData.bState < RSTATE_HS))
-+ ptidsl->AppData.bState = RSTATE_HS;
-+ if((ptidsl->rState == ATU_RSHOWTIME) && (ptidsl->AppData.bState < RSTATE_SHOWTIME))
-+ ptidsl->AppData.bState = RSTATE_SHOWTIME;
-+ break;
-+
-+ case 3: if((ptidsl->rState >= ADSL2_COMB3) && (ptidsl->AppData.bState < RSTATE_INIT))
-+ ptidsl->AppData.bState = RSTATE_INIT;
-+ if((ptidsl->rState >= ADSL2_RPARAMS) && (ptidsl->AppData.bState < RSTATE_HS))
-+ ptidsl->AppData.bState = RSTATE_HS;
-+ break;
-+
-+ case 4: break;
-+ default: break;
-+ }
-+
-+ ptidsl->stateTransition = modemStateBitFields[1];
-+ switch(ptidsl->AppData.bState)
-+ {
-+ case RSTATE_IDLE: ptidsl->AppData.idleTick=shim_osClockTick();
-+ ptidsl->AppData.initTick=0;
-+ ptidsl->AppData.showtimeTick=0;
-+ break;
-+ case RSTATE_HS: if(!ptidsl->AppData.initTick)
-+ {
-+ ptidsl->AppData.initTick=shim_osClockTick();
-+ }
-+ ptidsl->AppData.showtimeTick=0;
-+ break;
-+ case RSTATE_SHOWTIME: if(!ptidsl->AppData.showtimeTick)
-+ ptidsl->AppData.showtimeTick=shim_osClockTick();
-+ break;
-+ default: break;
-+ }
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_setInterruptMask()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_setInterruptMask(tidsl_t * ptidsl,unsigned int inputMask)
-+{
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ DEV_HOST_hostInterruptMask_t interruptMask;
-+ unsigned int rc=0;
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ dspOamSharedInterface.hostInterruptMask_p =(DEV_HOST_hostInterruptMask_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.hostInterruptMask_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.hostInterruptMask_p,
-+ &interruptMask, sizeof(DEV_HOST_hostInterruptMask_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ if(inputMask & MASK_MAILBOX_INTERRUPTS)
-+ {
-+ dprintf(7,"Mailbox Interrupts Masked \n");
-+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+ interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_MAILBOX_INTERRUPTS);
-+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+ }
-+ if(inputMask & MASK_BITFIELD_INTERRUPTS)
-+ {
-+ dprintf(7,"Bit field Interrupts Masked \n");
-+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+ interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_BITFIELD_INTERRUPTS);
-+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+ }
-+ if(inputMask & MASK_HEARTBEAT_INTERRUPTS)
-+ {
-+ dprintf(7,"Bit field Interrupts Masked \n");
-+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+ interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_HEARTBEAT_INTERRUPTS);
-+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1));
-+ }
-+ dslhal_support_blockWrite(&interruptMask,
-+ dspOamSharedInterface.hostInterruptMask_p, sizeof(DEV_HOST_hostInterruptMask_t));
-+ dprintf(5,"dslhal_support_setInterruptMask() completed.\n");
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_parseInterruptSource()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Parses the Interrupt Source Bit Field
-+*
-+* Return: interrupt Code if successful
-+* negative error code if failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_parseInterruptSource(tidsl_t * ptidsl)
-+{
-+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface;
-+ DEV_HOST_hostInterruptSource_t interruptSource;
-+ unsigned int rc=0,intrCode=0;
-+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return (0-DSLHAL_ERROR_BLOCK_READ);
-+ }
-+ dspOamSharedInterface.hostInterruptSource_p =(DEV_HOST_hostInterruptSource_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.hostInterruptSource_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.hostInterruptSource_p,
-+ &interruptSource, sizeof(DEV_HOST_hostInterruptSource_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return (0-DSLHAL_ERROR_BLOCK_READ);
-+ }
-+ if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_MAILBOX_INTERRUPTS))
-+ {
-+ dprintf(7,"Mailbox Interrupts Acknowledge \n");
-+ intrCode |= 0x00000011;
-+ }
-+ if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_BITFIELD_INTERRUPTS))
-+ {
-+ dprintf(7,"Bit field Interrupt Acknowledge \n");
-+ intrCode |= 0x00001002;
-+ }
-+ if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_HEARTBEAT_INTERRUPTS))
-+ {
-+ dprintf(7,"HeartBeat Interrupt Acknowledge \n");
-+ intrCode |= 0x00100004;
-+ }
-+
-+ interruptSource.sourceBitField1 &=0x0;
-+ rc=dslhal_support_blockWrite(&interruptSource,
-+ dspOamSharedInterface.hostInterruptSource_p, sizeof(DEV_HOST_hostInterruptSource_t));
-+ if(rc)
-+ return (0-DSLHAL_ERROR_BLOCK_WRITE);
-+ dprintf(5,"dslhal_support_parseInterruptSource() completed.\n");
-+ return intrCode;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_byteSwap16()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* input 16 bit short, byte swap from little endian to big endian or vise versa
-+*
-+********************************************************************************************/
-+
-+unsigned short dslhal_support_byteSwap16(unsigned short in16Bits)
-+{
-+ unsigned short out16Bits;
-+
-+#ifdef EB
-+ unsigned char *pchar;
-+ unsigned char tmp;
-+#endif
-+
-+ out16Bits = in16Bits;
-+
-+#ifdef EB
-+ pchar = (unsigned char *)(&out16Bits);
-+
-+ tmp = *pchar;
-+ *pchar = *(pchar + 1);
-+ *(pchar + 1) = tmp;
-+#endif
-+
-+ return out16Bits;
-+
-+} /* end of dslhal_support_byteSwap16() */
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_byteSwap32()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* input 32 bit int, byte swap from little endian to big endian or vise versa
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_byteSwap32(unsigned int in32Bits)
-+{
-+ int out32Bits;
-+
-+#ifdef EB
-+ unsigned char tmp;
-+ unsigned char *pchar;
-+#endif
-+
-+ out32Bits = in32Bits;
-+
-+#ifdef EB
-+ pchar = (unsigned char *)(&out32Bits);
-+
-+ tmp = *pchar;
-+ *pchar = *(pchar + 3);
-+ *(pchar + 3) = tmp;
-+
-+ tmp = *(pchar + 1);
-+ *(pchar + 1) = *(pchar + 2);
-+ *(pchar + 2) = tmp;
-+#endif
-+
-+ return out32Bits;
-+
-+} /* end of dslhal_support_byteSwap32() */
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_computeCrc32()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Computes the CRC-32 for the input data
-+*
-+* Return: 32 bit CRC of the input data
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_computeCrc32(unsigned char *data, int len)
-+{
-+ unsigned int result;
-+ int i,j;
-+ unsigned char octet;
-+
-+ if ((len < 4) || (data==NULL))
-+ return(0xdeaddead);
-+ result = *data++ << 24;
-+ result |= *data++ << 16;
-+ result |= *data++ << 8;
-+ result |= *data++;
-+ result = ~ result;
-+
-+ len -=4;
-+
-+ for (i=0; i<len; i++)
-+ {
-+ octet = *(data++);
-+ for (j=0; j<8; j++)
-+ {
-+ if (result & 0x80000000)
-+ {
-+ result = (result << 1) ^ CRC32_QUOTIENT ^ (octet >> 7);
-+ }
-+ else
-+ {
-+ result = (result << 1) ^ (octet >> 7);
-+ }
-+ octet <<= 1;
-+ }
-+ }
-+ return ~result; /* The complement of the remainder */
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_checkOverlayPage()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_checkOverlayPage(tidsl_t *ptidsl, unsigned int tag)
-+{
-+ unsigned int computedCrc;
-+ if((unsigned char *)ptidsl->olayDpPage[tag].PmemStartWtAddr == NULL)
-+ {
-+ dprintf(5,"Null Address for Page: %d\n",tag);
-+ return DSLHAL_ERROR_OVERLAY_MALLOC;
-+ }
-+ computedCrc = dslhal_support_computeCrc32((unsigned char *)ptidsl->olayDpPage[tag].PmemStartWtAddr, ptidsl->olayDpPage[tag].OverlayXferCount);
-+ dprintf(6,"\n Pre-Computed CRC32 = 0x%x \t Current CRC32 = 0x%x \n",ptidsl->olayDpPage[tag].olayPageCrc32,computedCrc);
-+ if(computedCrc != ptidsl->olayDpPage[tag].olayPageCrc32)
-+ return DSLHAL_ERROR_OVERLAY_CORRUPTED;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_clearTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_clearTrainingInfo(tidsl_t *ptidsl)
-+{
-+ int i;
-+
-+ for(i=0; i<NUM_PAGES; i++)
-+ {
-+ if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL)
-+ {
-+ shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr,
-+ ptidsl->olayDpPage[i].OverlayXferCount);
-+ ptidsl->olayDpPage[i].PmemStartWtAddr =NULL;
-+ }
-+ }
-+ if(ptidsl->coProfiles.PmemStartWtAddr != NULL)
-+ {
-+ shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount);
-+ ptidsl->coProfiles.PmemStartWtAddr = NULL;
-+ }
-+ return 0;
-+}
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_reloadTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Reload overlay pages from flash or memory
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_reloadTrainingInfo(tidsl_t * ptidsl)
-+{
-+
-+ int rc = 0, i;
-+ unsigned int olayXfer,olayStore;
-+ unsigned int *olayStart;
-+
-+ unsigned int crc32;
-+ DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface;
-+ DEV_HOST_olayDpDef_t olayDpParms;
-+ DEV_HOST_olayDpPageDef_t olayDpPageDef[NUM_PAGES];
-+ DEV_HOST_profileBase_t profileList;
-+
-+ unsigned int secLength, secOffset, secPage;
-+
-+ /* co profile */
-+ secLength = ptidsl->coProfiles.OverlayXferCount;
-+ secOffset = ptidsl->coProfiles.SecOffset;
-+ ptidsl->coProfiles.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength);
-+ if(ptidsl->coProfiles.PmemStartWtAddr == NULL)
-+ {
-+ dprintf(1, "memory allocate error\n");
-+ return DSLHAL_ERROR_OVERLAY_MALLOC;
-+ }
-+ /* holdSecPhyAddr = virtual2Physical((unsigned int)holdSecVirtAddr); */
-+ ptidsl->coProfiles.overlayHostAddr = virtual2Physical((unsigned int)ptidsl->coProfiles.PmemStartWtAddr);
-+ dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.overlayHostAddr);
-+ ptidsl->coProfiles.overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->coProfiles.overlayHostAddr);
-+
-+ rc = shim_read_overlay_page((void *)ptidsl->coProfiles.PmemStartWtAddr, secOffset, secLength);
-+ if(rc != secLength)
-+ {
-+ dprintf(1, "shim_read_overlay_page failed\n");
-+ return DSLHAL_ERROR_OVERLAY_MALLOC;
-+ }
-+
-+ /*shim_osMoveMemory((char *)ptidsl->coProfiles.PmemStartWtAddr, (char *)iptr, secLength);*/
-+ /* RamP Image ByteSwap test */
-+ olayStart = (unsigned int *)ptidsl->coProfiles.PmemStartWtAddr;
-+
-+ for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
-+ {
-+ olayStore = *(unsigned int *)olayStart;
-+ olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
-+ *(unsigned int*)olayStart = olayStore;
-+ dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
-+ olayStart++;
-+ olayStore=0;
-+ }
-+ shim_osWriteBackCache((void *)ptidsl->coProfiles.PmemStartWtAddr, secLength);
-+
-+
-+ for (secPage=1;secPage<NUM_PAGES; secPage++)
-+ {
-+
-+ dprintf(6,"OVERLAY PAGE #%d\n",secPage);
-+
-+ secLength = ptidsl->olayDpPage[secPage].OverlayXferCount;
-+
-+ dprintf(4,"Section[%d] Length: %d \n",secPage, secLength);
-+
-+ secOffset = ptidsl->olayDpPage[secPage].SecOffset;
-+ ptidsl->olayDpPage[secPage].PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength);
-+ if(ptidsl->olayDpPage[secPage].PmemStartWtAddr == NULL)
-+ {
-+ dprintf(1, "overlay page allocate error\n");
-+ return DSLHAL_ERROR_OVERLAY_MALLOC;
-+ }
-+
-+ rc = shim_read_overlay_page((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr,secOffset, secLength);
-+ if(rc != secLength)
-+ {
-+ dprintf(1, "overlay page read error\n");
-+ return DSLHAL_ERROR_OVERLAY_MALLOC;
-+ }
-+
-+ /* ptidsl->olayDpPage[secPage].overlayHostAddr = ((unsigned int)(ptidsl->olayDpPage[secPage].PmemStartWtAddr)&~0xe0000000); */
-+ ptidsl->olayDpPage[secPage].overlayHostAddr = virtual2Physical((unsigned int)ptidsl->olayDpPage[secPage].PmemStartWtAddr);
-+ dprintf(6,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->olayDpPage[secPage].PmemStartWtAddr,ptidsl->olayDpPage[secPage].overlayHostAddr);
-+
-+ ptidsl->olayDpPage[secPage].overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->olayDpPage[secPage].overlayHostAddr);
-+ /*ptidsl->olayDpPage[secPage].OverlayXferCount = secLength;
-+ ptidsl->olayDpPage[secPage].BinAddr = secAddr;
-+ shim_osMoveMemory((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, (char *)iptr, secLength);
-+ */
-+ olayStart = (unsigned int *)ptidsl->olayDpPage[secPage].PmemStartWtAddr;
-+
-+ for(olayXfer=0;olayXfer< secLength/4;olayXfer++)
-+ {
-+ olayStore = *(unsigned int *)olayStart;
-+ olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore);
-+ *(unsigned int*)olayStart = olayStore;
-+ dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore);
-+ olayStart++;
-+ olayStore=0;
-+ }
-+ /* RamP Image ByteSwap test */
-+ /* compute the CRC of each overlay page and Store the Checksum in a local global variable */
-+ /* This Value of CRC is to be compared with the header where all the CRC bytes are lumped together */
-+ crc32 = dslhal_support_computeCrc32((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, ptidsl->olayDpPage[secPage].OverlayXferCount);
-+ if(crc32 != ptidsl->olayDpPage[secPage].olayPageCrc32)
-+ return DSLHAL_ERROR_OVERLAY_MALLOC;
-+
-+ shim_osWriteBackCache((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, secLength);
-+ }
-+
-+
-+ dprintf(5,"ptidsl->hostIf.mainAddr=0x%X\n", (unsigned int)ptidsl->pmainAddr);
-+
-+ /* get the pointer to DSP-OAM Shared Interface */
-+ rc = dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface,
-+ sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ /* Communicate the Allocated Memory Address to DSP to choose CO Profiles */
-+
-+ /* Change the Endianness of the profileList pointer */
-+ dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p);
-+ /* Access the profileList Structure */
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+ dprintf(2,"Old Addr:%x New: %x \n",profileList.hostProfileBase_p,ptidsl->coProfiles.overlayHostAddr);
-+ profileList.hostProfileBase_p = (DEV_HOST_coData_t *)ptidsl->coProfiles.overlayHostAddr;
-+ rc = dslhal_support_blockWrite(&profileList,(PVOID)dspOamSharedInterface.profileList_p,sizeof(DEV_HOST_profileBase_t));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_WRITE;
-+
-+ /* Communicate the Allocated Memory Address to DSP to do overlays */
-+
-+ /* Change the Endianness of the olayDpDef pointer */
-+ dspOamSharedInterface.olayDpParms_p = (DEV_HOST_olayDpDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.olayDpParms_p);
-+ /* Access the olayDpDef Structure */
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.olayDpParms_p,&olayDpParms, sizeof(DEV_HOST_olayDpDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+
-+ for(i=1;i<NUM_PAGES;i++)
-+ {
-+ /* Change the endianness of the olayDpPageDef Pointer */
-+ olayDpParms.olayDpPage_p[i] = (DEV_HOST_olayDpPageDef_t *) dslhal_support_byteSwap32((unsigned int)olayDpParms.olayDpPage_p[i]);
-+ /* Access the olayDpPageDef Structure */
-+ rc = dslhal_support_blockRead((PVOID)olayDpParms.olayDpPage_p[i],&olayDpPageDef[i],sizeof(DEV_HOST_olayDpPageDef_t));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ olayDpPageDef[i].overlayHostAddr = ptidsl->olayDpPage[i].overlayHostAddr;
-+ rc = dslhal_support_blockWrite(&olayDpPageDef[i],(PVOID)olayDpParms.olayDpPage_p[i],sizeof(DEV_HOST_olayDpPageDef_t));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_WRITE;
-+ }
-+
-+ ptidsl->bOverlayPageLoaded = 1;
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+ /* end of dslhal_support_reloadTrainingInfo() */
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_restoreTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+
-+int dslhal_support_restoreTrainingInfo(tidsl_t *ptidsl)
-+{
-+ int rc;
-+
-+ rc=1;
-+ while(rc != 0)
-+ {
-+ dslhal_support_clearTrainingInfo(ptidsl);
-+ //shim_osCriticalEnter();
-+ rc = dslhal_support_reloadTrainingInfo(ptidsl);
-+ //shim_osCriticalExit();
-+ shim_osClockWait(6400);
-+ }
-+ return 0;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_advancedIdleProcessing()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced Idle State Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_advancedIdleProcessing(tidsl_t *ptidsl)
-+{
-+ int rc=0;
-+ ptidsl->AppData.bState = RSTATE_IDLE;
-+#ifndef NO_ACT
-+ rc += dslhal_advcfg_resetBitSwapMessageLog(ptidsl,0);
-+ rc += dslhal_advcfg_resetBitSwapMessageLog(ptidsl,1);
-+ rc += dslhal_advcfg_resetTrainStateHistory(ptidsl);
-+ rc += dslhal_advcfg_getReasonForDrop(ptidsl);
-+#endif
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_aocBitSwapProcessing()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced Idle State Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_aocBitSwapProcessing(tidsl_t *ptidsl,unsigned int usDs)
-+{
-+ int rc=0;
-+#ifndef NO_ACT
-+ int i;
-+ int differentCmd_f;
-+ unsigned int dsSwapInx;
-+
-+ static UINT8 lastAturBitSwapCommands[6] = {0, 0, 0, 0, 0, 0};
-+ static UINT8 lastAturBitSwapBinNum[6] = {0, 0, 0, 0, 0, 0};
-+
-+ if (usDs == 0)
-+ {
-+ dprintf(4," DSP_XMITBITSWAP\n");
-+ rc += dslhal_advcfg_getAocBitswapBuffer(ptidsl,0);
-+ ptidsl->usBitSwapInx++;
-+ if (ptidsl->usBitSwapInx > 29)
-+ ptidsl->usBitSwapInx=0;
-+ }
-+
-+ if (usDs == 1)
-+ {
-+ dprintf(4," DSP_RCVBITSWAP\n");
-+ rc += dslhal_advcfg_getAocBitswapBuffer(ptidsl,1);
-+ differentCmd_f = FALSE;
-+ dsSwapInx = ptidsl->dsBitSwapInx;
-+ if (! rc)
-+ {
-+ for (i = 0; i < 6; i++)
-+ {
-+ if (lastAturBitSwapCommands[i] != ptidsl->dsBitSwap[dsSwapInx].bitSwapCommand[i])
-+ {
-+ differentCmd_f = TRUE;
-+ break;
-+ }
-+ }
-+ if (! differentCmd_f)
-+ {
-+ for (i = 0; i < 6; i++)
-+ {
-+ if (lastAturBitSwapBinNum[i] != ptidsl->dsBitSwap[dsSwapInx].bitSwapBinNum[i])
-+ {
-+ differentCmd_f = TRUE;
-+ break;
-+ }
-+ }
-+ }
-+ //CPE data pump seems to occasionally send us the same bit swap twice in a row with different sframe counter.
-+ //Since these are never counted twice by the debug output of AC5, we should not count them twice either.
-+ //So, we ignore the sframe_counter in determining whether the most recent bitswap is a duplicate.
-+ if (differentCmd_f)
-+ {
-+ shim_osMoveMemory((void *)lastAturBitSwapCommands, (void *)ptidsl->dsBitSwap[dsSwapInx].bitSwapCommand, 6);
-+ shim_osMoveMemory((void *)lastAturBitSwapBinNum, (void *)ptidsl->dsBitSwap[dsSwapInx].bitSwapBinNum, 6);
-+ ptidsl->dsBitSwapInx++;
-+ if (ptidsl->dsBitSwapInx > 29)
-+ ptidsl->dsBitSwapInx = 0;
-+ }
-+ }
-+ }
-+#endif
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherEocMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced EOC Buffering functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherEocMessages(tidsl_t *ptidsl,int usDs, int msgPart1, int msgPart2)
-+{
-+ int rc=0;
-+#ifndef NO_ACT
-+ rc = dslhal_advcfg_logEocMessages(ptidsl,usDs, msgPart1, msgPart2);
-+#endif
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherSnrPerBin()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced Snr per bin buffering Functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherSnrPerBin(tidsl_t *ptidsl,unsigned int snrParam)
-+{
-+ int rc=0;
-+#ifndef NO_ACT
-+ rc = dslhal_advcfg_getSnrPerBin(ptidsl,snrParam);
-+#endif
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_processTrainingState()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced Training State Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_processTrainingState(tidsl_t *ptidsl)
-+{
-+ int rc=0;
-+#ifndef NO_ACT
-+
-+ if(ptidsl->trainStateInx<120)
-+ {
-+ rc = dslhal_advcfg_getTrainingState(ptidsl,(void *)&ptidsl->trainHistory[ptidsl->trainStateInx++]);
-+ if(ptidsl->trainHistory[(ptidsl->trainStateInx-1)].subStateIndex ==
-+ ptidsl->trainHistory[(ptidsl->trainStateInx-2)].subStateIndex)
-+ ptidsl->trainStateInx--;
-+ }
-+ else
-+ ptidsl->trainStateInx = 0;
-+#endif
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherAdsl2Messages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Gathers ADSL2 Training Messages
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherAdsl2Messages(tidsl_t *ptidsl,int tag, int param1, int param2)
-+{
-+ int rc=0;
-+ unsigned int adsl2MsgLoc;
-+ switch(tag)
-+ {
-+ case CMSGFMT_INDEX:
-+ dprintf(5,"C-Msg-FMT rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSGFMT_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.cMsgFmt,CMSGFMT_SIZE);
-+ break;
-+ case RMSGFMT_INDEX:
-+ case RMSGFMT2_INDEX:
-+ dprintf(5,"R-Msg-FMT rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSGFMT_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.rMsgFmt,RMSGFMT_SIZE);
-+ break;
-+ case CMSGPCB_INDEX:
-+ dprintf(5,"C-Msg-PCB rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSGPCB_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB_SIZE);
-+ ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB_SIZE;
-+ break;
-+ case CMSGPCB2_INDEX:
-+ dprintf(5,"C-Msg-PCB2 rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSGPCB2_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB2_SIZE);
-+ ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB2_SIZE;
-+#ifndef NO_ACT
-+ rc += dslhal_advcfg_setBlackOutBits(ptidsl);
-+#endif
-+ break;
-+ case CMSGPCB2L_INDEX:
-+ dprintf(5,"C-Msg-PCB2L rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSGPCB2L_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB2L_SIZE);
-+ ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB2L_SIZE;
-+ break;
-+ case RMSGPCB_INDEX:
-+ case RMSGPCB2L_INDEX:
-+ dprintf(5,"R-Msg-PCB rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSGPCB_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.rMsgPcb,RMSGPCB_SIZE);
-+ ptidsl->adsl2TrainingMessages.rMsgPcbLen = RMSGPCB_SIZE;
-+ break;
-+
-+ case CMSG1ADSL2_INDEX:
-+ dprintf(5,"C-Msg1 rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSG1ADSL2_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.cMsg1,CMSG1ADSL2_SIZE);
-+ ptidsl->adsl2TrainingMessages.cMsg1Len = CMSG1ADSL2_SIZE;
-+ break;
-+ case CMSG2ADSL2_INDEX:
-+ dprintf(5,"C-Msg2 rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSG2ADSL2_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.cMsg2,CMSG2ADSL2_SIZE);
-+ ptidsl->adsl2TrainingMessages.cMsg2Len = CMSG2ADSL2_SIZE;
-+ break;
-+ case RMSG1ADSL2_INDEX:
-+ dprintf(5,"R-Msg1 rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG1ADSL2_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.rMsg1,RMSG1ADSL2_SIZE);
-+ ptidsl->adsl2TrainingMessages.rMsg1Len = RMSG1ADSL2_SIZE;
-+ break;
-+ case RMSG2ADSL2_INDEX:
-+ dprintf(5,"R-Msg2 rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG2ADSL2_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.rMsg2,RMSG2ADSL2_SIZE);
-+ ptidsl->adsl2TrainingMessages.rMsg2Len = RMSG2ADSL2_SIZE;
-+ break;
-+ case CPARAMS_INDEX:
-+ dprintf(5,"C-Params rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CPARAMS_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.cParams,CPARAMS_SIZE);
-+ ptidsl->adsl2TrainingMessages.cParamsLen = CPARAMS_SIZE;
-+ break;
-+ case RPARAMS_INDEX:
-+ dprintf(5,"R-Params rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RPARAMS_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2TrainingMessages.rParams,RPARAMS_SIZE);
-+ ptidsl->adsl2TrainingMessages.rParamsLen = RPARAMS_SIZE;
-+ break;
-+ case RMSG1LD_INDEX:
-+ dprintf(5,"R-Msg1 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG1LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.rMsg1Ld,RMSG1LD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.rMsg1LdLen = RMSG1LD_SIZE;
-+ break;
-+ case RMSG2LD_INDEX:
-+ dprintf(5,"R-Msg2 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG2LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.rMsg2Ld,RMSGxLD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+ break;
-+ case RMSG3LD_INDEX:
-+ dprintf(5,"R-Msg3 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG3LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.rMsg3Ld,RMSGxLD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+ break;
-+ case RMSG4LD_INDEX:
-+ dprintf(5,"R-Msg4 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG4LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.rMsg4Ld,RMSGxLD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+ break;
-+ case RMSG5LD_INDEX:
-+ dprintf(5,"R-Msg5 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG5LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.rMsg5Ld,RMSGxLD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+ break;
-+ case RMSG6LD_INDEX:
-+ dprintf(5,"R-Msg6 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG6LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.rMsg6Ld,RMSGxLD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+ break;
-+ case RMSG7LD_INDEX:
-+ dprintf(5,"R-Msg7 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG7LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.rMsg7Ld,RMSGxLD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+ break;
-+ case RMSG8LD_INDEX:
-+ dprintf(5,"R-Msg8 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG8LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.rMsg8Ld,RMSGxLD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+ break;
-+ case RMSG9LD_INDEX:
-+ dprintf(5,"R-Msg9 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, RMSG9LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.rMsg9Ld,RMSGxLD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE;
-+ break;
-+ case CMSG1LD_INDEX:
-+ dprintf(5,"C-Msg1 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSG1LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.cMsg1Ld,CMSG1LD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.cMsg1LdLen = CMSG1LD_SIZE;
-+ break;
-+ case CMSG2LD_INDEX:
-+ dprintf(5,"C-Msg2 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSG2LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.cMsg2Ld,CMSG2LD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.cMsg2LdLen = CMSG2LD_SIZE;
-+ break;
-+ case CMSG3LD_INDEX:
-+ dprintf(5,"C-Msg3 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSG3LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.cMsg3Ld,CMSG3LD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.cMsg3LdLen = CMSG3LD_SIZE;
-+ break;
-+ case CMSG4LD_INDEX:
-+ dprintf(5,"C-Msg4 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSG4LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.cMsg4Ld,CMSG4LD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.cMsg4LdLen = CMSG4LD_SIZE;
-+ break;
-+ case CMSG5LD_INDEX:
-+ dprintf(5,"C-Msg5 LD rec'd\n");
-+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation
-+ (ptidsl, CMSG5LD_INDEX);
-+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc,
-+ ptidsl->adsl2DiagnosticMessages.cMsg5Ld,CMSG5LD_SIZE);
-+ ptidsl->adsl2DiagnosticMessages.cMsg5LdLen = CMSG5LD_SIZE;
-+ break;
-+ default:
-+ dprintf(5,"Unknown ADSL2 Message rec'd\n");
-+ break;
-+ }
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_getAdsl2MessageLocation()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Gets the address to the ADSL2 Message being looked up
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_getAdsl2MessageLocation(tidsl_t *ptidsl,int msgOffset)
-+{
-+ int rc=0;
-+
-+ DEV_HOST_dspOamSharedInterface_t *pSharedInterface, sharedInterface;
-+ DEV_HOST_dspWrNegoParaDef_t dspNegoPara;
-+ int adsl2MsgString, adsl2MsgAddr;
-+
-+ pSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr;
-+ rc += dslhal_support_blockRead(pSharedInterface, &sharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ sharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_adsl2ByteSwap32((unsigned int)sharedInterface.dspWriteNegoParams_p);
-+ rc += dslhal_support_blockRead((PVOID)sharedInterface.dspWriteNegoParams_p,&dspNegoPara, sizeof(DEV_HOST_dspWrNegoParaDef_t));
-+
-+ if (rc)
-+ {
-+ dprintf(1,"dslhal_support_blockRead failed\n");
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ }
-+
-+ adsl2MsgString = dslhal_support_adsl2ByteSwap32((unsigned int)dspNegoPara.adsl2DeltMsgs_p);
-+ dprintf(5,"ADSL2 Message String Address: 0x%x\n",adsl2MsgString);
-+ rc += dslhal_support_blockRead((PVOID)(adsl2MsgString +
-+ ((sizeof(unsigned char *)*msgOffset))),
-+ &adsl2MsgAddr, sizeof(int));
-+ adsl2MsgAddr = dslhal_support_adsl2ByteSwap32((unsigned int)adsl2MsgAddr);
-+ dprintf(5," Message Address: 0x%x\n",adsl2MsgAddr);
-+
-+ if(rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ else
-+ return adsl2MsgAddr;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_getCMsgsRa()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced Training Message functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_getCMsgsRa(tidsl_t *ptidsl,void *cMsg)
-+{
-+ int rc=0;
-+ DEV_HOST_raMsgsDef_t raMsgParms;
-+ DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface;
-+ rc += dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+
-+ dspOamSharedInterface.raMsgs_p = (DEV_HOST_raMsgsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.raMsgs_p);
-+
-+ rc += dslhal_support_blockRead((PVOID)dspOamSharedInterface.raMsgs_p,
-+ &raMsgParms, sizeof(DEV_HOST_raMsgsDef_t));
-+ shim_osMoveMemory((void *)cMsg,(void *)raMsgParms.cMsgsRaString,6);
-+
-+ if(rc)
-+ return DSLHAL_ERROR_CONFIG_API_FAILURE;
-+ else
-+ return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherRateMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Gathers Rate Training Messages
-+* Input
-+* tidsl_t *ptidsl : Pointer to application structure
-+*
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherRateMessages(tidsl_t * ptidsl)
-+{
-+ int rc;
-+ DEV_HOST_dspWrNegoParaDef_t negoParms;
-+ DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface;
-+
-+ dprintf(1, "dslhal_support_gatherRateMessages\n");
-+
-+ rc += dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t));
-+ dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p);
-+
-+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p, &negoParms, sizeof(DEV_HOST_dspWrNegoParaDef_t));
-+ if (rc)
-+ return DSLHAL_ERROR_BLOCK_READ;
-+ else
-+ {
-+ shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)negoParms.cRates1, 120);
-+ shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)negoParms.rRates1, 44);
-+ }
-+return DSLHAL_ERROR_NO_ERRORS;
-+}
-+
-+static unsigned int dslhal_support_adsl2ByteSwap32(unsigned int in32Bits)
-+{
-+ int out32Bits=0;
-+
-+#ifdef EB
-+ out32Bits = (in32Bits << 24);
-+ out32Bits |=((in32Bits & 0x0000ff00) << 8);
-+ out32Bits |=((in32Bits & 0xff000000) >> 24);
-+ out32Bits |=((in32Bits & 0x00ff0000) >> 8);
-+#else
-+ out32Bits = in32Bits;
-+#endif
-+
-+ return out32Bits;
-+
-+} /* end of dslhal_support_byteSwap32() */
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_support.h linux.dev/drivers/atm/sangam_atm/dsl_hal_support.h
---- linux.old/drivers/atm/sangam_atm/dsl_hal_support.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_support.h 2005-08-23 04:46:50.101843088 +0200
-@@ -0,0 +1,718 @@
-+#ifndef DSL_HAL_SUPPORT_H__
-+#define DSL_HAL_SUPPORT_H__ 1
-+
-+/*******************************************************************************
-+* FILE PURPOSE: DSL Driver API functions for Sangam
-+*
-+********************************************************************************
-+* FILE NAME: dsl_hal_functiondefines.c
-+*
-+* DESCRIPTION:
-+* Contains basic DSL HAL API declarations for Sangam
-+*
-+*
-+* (C) Copyright 2001-02, Texas Instruments, Inc.
-+* History
-+* Date Version Notes
-+* 06Feb03 0.00.00 RamP Created
-+* 21Mar03 0.00.01 RamP Removed byteswap functions
-+* 21Mar03 0.00.02 RamP Added extern osFreeVMemory declaration
-+* 10Apr03 0.00.03 RamP Changed declaration for loadFWImage &
-+* loadDebugFWImage to remove ptidsl param
-+* 12Apr03 0.00.04 RamP Added function to set Interrupt Bit
-+* Masks for bitfield & Mailboxes
-+* 14Apr03 0.00.05 RamP Added modem state bit field processing
-+* 15Apr03 0.00.06 RamP Added function osAllocateVMemory
-+* 21Apr03 0.01.00 RamP Added function osAllocateDmaMemory
-+* Added function osFreeDmaMemory
-+* (Alpha) Added macro virtual2Physical,
-+* 22Apr03 0.01.01 RamP Moved acknowledgeInterrupt to api.h
-+* 24Apr03 0.01.02 RamP Added checkOvelayPage function
-+* 29May03 0.01.03 RamP Added critical enter/exit function decl
-+* 06Jun03 0.01.04 RamP Added Interrupt source parsing function
-+* 06Oct03 0.01.05 RamP Added function abstraction switches
-+* 12Oct03 0.01.06 RamP Added ADSL2 Message function prototypes
-+* 14Nov03 0.03.07 RamP Added function to gather Rate Messages
-+*******************************************************************************/
-+
-+#include "dsl_hal_api.h"
-+
-+#define virtual2Physical(a) (((int)a)&~0xe0000000)
-+/* External Function Prototype Declarations */
-+
-+extern unsigned int shim_osGetCpuFrequency(void);
-+extern void shim_osClockWait(int val);
-+extern unsigned int shim_osClockTick(void);
-+
-+extern int shim_osStringCmp(const char *s1, const char *s2);
-+
-+extern void dprintf( int uDbgLevel, char * szFmt, ...);
-+
-+extern int shim_osLoadFWImage(unsigned char *firmwareImage);
-+extern int shim_osLoadDebugFWImage(unsigned char *debugFirmwareImage);
-+extern unsigned int shim_read_overlay_page(void *ptr, unsigned int secOffset, unsigned int secLength);
-+extern void shim_osMoveMemory(char *dst, char *src, unsigned int numBytes);
-+extern void shim_osZeroMemory(char *dst, unsigned int numBytes);
-+
-+extern void *shim_osAllocateMemory(unsigned int size);
-+extern void *shim_osAllocateVMemory(unsigned int size);
-+extern void *shim_osAllocateDmaMemory(unsigned int size);
-+
-+extern void shim_osFreeMemory(void *ptr, unsigned int size);
-+extern void shim_osFreeVMemory(void *ptr, unsigned int size);
-+extern void shim_osFreeDmaMemory(void *ptr, unsigned int size);
-+
-+extern void shim_osWriteBackCache(void *pMem, unsigned int size);
-+extern void shim_osCriticalEnter(void);
-+extern void shim_osCriticalExit(void);
-+
-+
-+/*******************************************************************************************
-+* FUNCTION NAME: dslhal_support_writeHostMailbox
-+*
-+********************************************************************************************
-+* DESCRIPTION: Send a message to a mailbox
-+*
-+* ARGUMENTS: int cmd command to write
-+* int tag tag (currently unused)
-+* int p1 parameter 1 (currently unused)
-+* int p2 parameter 2 (currently unused)
-+*
-+* RETURNS: 0 if successful
-+* NZ otherwise
-+*
-+*******************************************************************************************/
-+
-+int dslhal_support_writeHostMailbox
-+(tidsl_t *ptidsl,
-+ int cmd,
-+ int tag,
-+ int p1,
-+ int p2);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_readDspMailbox
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Reads a message from the mailbox
-+*
-+* ARGUMENTS: int *pcmd Pointer to command read
-+*
-+* RETURNS: 0 if successful
-+* 1 if no mail
-+* NZ otherwise
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_readDspMailbox
-+(tidsl_t *ptidsl,
-+ int *pcmd,
-+ int *ptag,
-+ int *pprm1,
-+ int *pprm2);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_readTextMailbox
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Reads a message from the mailbox
-+*
-+* ARGUMENTS: int *pcmd Pointer to command read
-+*
-+* RETURNS: 0 if successful
-+* 1 if no mail
-+* NZ otherwise
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_readTextMailbox
-+(tidsl_t *ptidsl,
-+ int *pmsg1,
-+ int *pmsg2);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_blockRead
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This rouin simulates DSP memory read as done in ax5 pci nic card
-+*
-+* INPUT: void *addr, memory address to be read
-+* void *buffer, dat buffer to be filled with from memmory
-+* size_t count, number of bytes to be written
-+*
-+* RETURN: 0 --succeeded
-+* 1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_blockRead
-+(void *addr,
-+ void *buffer,
-+ size_t count);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_blockWrite
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This rouin simulates DSP memory write as done in ax5 pci nic card
-+*
-+* INPUT: void *buffer, data need to written
-+* void *adde, memory address to be written
-+* size_t count, number of bytes to be written
-+*
-+* RETURN: 0 --succeeded
-+* 1 --Failed
-+*
-+*****************************************************************************************/
-+
-+int dslhal_support_blockWrite
-+(void *buffer,
-+ void *addr,
-+ size_t count);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_hostDspAddressTranslate
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This function moves the address window to translate physical address
-+*
-+* INPUT: unsigned int addr : address that requires translation
-+*
-+* RETURN: Translated address or error condition
-+*
-+*
-+*****************************************************************************************/
-+
-+unsigned int dslhal_support_hostDspAddressTranslate
-+( unsigned int addr
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_unresetDslSubsystem
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This function unreset Dsl Subsystem
-+*
-+* INPUT: None
-+*
-+* RETURN: 0 if Pass; 1 if Fail
-+*
-+*****************************************************************************************/
-+int dslhal_support_unresetDslSubsystem
-+(void
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_unresetDsp()
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction takes ax5 daugter board out of reset.
-+*
-+* INPUT: None
-+*
-+* RETURN: 0 --successful.
-+* 1 --failed
-+*
-+*****************************************************************************************/
-+int dslhal_support_unresetDsp
-+(void
-+);
-+
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_resetDslSubsystem
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This function unreset Dsl Subsystem
-+*
-+* INPUT: None
-+*
-+* RETURN: 0 if Pass; 1 if Fail
-+*
-+*****************************************************************************************/
-+int dslhal_support_resetDslSubsystem
-+(void
-+);
-+
-+/******************************************************************************************
-+* FUNCTION NAME: dslhal_support_resetDsp()
-+*
-+*******************************************************************************************
-+* DESCRIPTION: This fuction takes ax5 daugter board out of reset.
-+*
-+* INPUT: None
-+*
-+* RETURN: 0 --successful.
-+* 1 --failed
-+*
-+*****************************************************************************************/
-+int dslhal_support_resetDsp
-+(void
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_hostDspCodeDownload()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* download DSP image from host memory to dsp memory
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_hostDspCodeDownload
-+(tidsl_t * ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_digi_assignMemTestSpace()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Assigns Memory Space in SDRAM for External Memory Test
-+* Input: tidsl_t *ptidsl
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_digi_assignMemTestSpace
-+(tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_digi_readMemTestResult()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Reads Results of External Memory Test
-+* Input: tidsl_t *ptidsl
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_digi_readMemTestResult
-+(tidsl_t *ptidsl,
-+unsigned int testResult
-+);
-+
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_codeDownload()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: Brings DSLSS out of Reset, Downloads Diag Firmware,
-+* brings DSP out of Reset
-+* Input: tidsl_t *ptidsl
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_codeDownload
-+(tidsl_t *ptidsl,
-+unsigned char* missingTones
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_setPgaParams()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+* tones and Medley's with missing tones. These signals are defined in ITU
-+* G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+* Tones selects the .
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_anlg_setPgaParams
-+(tidsl_t *ptidsl,
-+int agcFlag,
-+short pga1,
-+short pga2,
-+short pga3,
-+short aeq
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_getRxNoisePower()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+* tones and Medley's with missing tones. These signals are defined in ITU
-+* G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+* Tones selects the .
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_anlg_getRxNoisePower
-+(tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_diags_anlg_setMissingTones()
-+*
-+*********************************************************************************************
-+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing
-+* tones and Medley's with missing tones. These signals are defined in ITU
-+* G.992.1 ADSL Standards.
-+*
-+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley
-+* Tones selects the .
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_diags_anlg_setMissingTones
-+(tidsl_t *ptidsl,
-+unsigned char* missingTones
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_readDelineationState()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* download DSP image from host memory to dsp memory
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_readDelineationState
-+(tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_processModemStateBitField()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* download DSP image from host memory to dsp memory
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_processModemStateBitField
-+(tidsl_t *ptidsl
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_setInterruptMask()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_setInterruptMask
-+(tidsl_t * ptidsl,
-+unsigned int inputMask
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_computeCrc32()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Computes the CRC-32 for the input data
-+*
-+* Return: 32 bit CRC of the input data
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_computeCrc32
-+(unsigned char *data,
-+int len
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_checkOverlayPage()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_checkOverlayPage
-+(tidsl_t *ptidsl,
-+unsigned int tag
-+);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_restoreTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_restoreTrainingInfo(tidsl_t * ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_reloadTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_reloadTrainingInfo(tidsl_t * ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_clearTrainingInfo()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Computes the CRC-32 for the input data and compares it with reference
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+int dslhal_support_clearTrainingInfo(tidsl_t * ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_parseInterruptSource()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Sets the host interrupt bit masks
-+*
-+* Return: 0 success
-+* 1 failed
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_parseInterruptSource(tidsl_t * ptidsl);
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_advancedIdleProcessing()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced Idle State Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_advancedIdleProcessing(tidsl_t *ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_aocBitSwapProcessing()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced Bitswap buffer Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_aocBitSwapProcessing(tidsl_t *ptidsl,unsigned int usDs);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherEocMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced EOC Buffering functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherEocMessages(tidsl_t *ptidsl,int usDs, int msgPart1, int msgPart2);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherSnrPerBin()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced Snr per bin buffering Functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherSnrPerBin(tidsl_t *ptidsl,unsigned int snrParm);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_processTrainingState()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced Training State Processing Functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_processTrainingState(tidsl_t *ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherAdsl2Messages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced EOC Buffering functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherAdsl2Messages(tidsl_t *ptidsl,int msgTag, int param1, int param2);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_getAdsl2MsgLocation()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Gets the address to the ADSL2 Message being looked up
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_getAdsl2MessageLocation(tidsl_t *ptidsl,int msgOffset);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_getCMsgsRa()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Calls Advanced Training Message functions
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_getCMsgsRa(tidsl_t *ptidsl,void *cMsg);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_gatherRateMessages()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* Gathers Advanced Training Messages
-+*
-+* Return: Error Condition (if any)
-+*
-+*
-+* NOTE:
-+* DSP image is based on LITTLE endian
-+*
-+********************************************************************************************/
-+unsigned int dslhal_support_gatherRateMessages(tidsl_t *ptidsl);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_byteSwap16()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* byteswap a short
-+*
-+* INPUT:
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+unsigned short dslhal_support_byteSwap16(unsigned short in16Bits);
-+
-+/********************************************************************************************
-+* FUNCTION NAME: dslhal_support_byteSwap32()
-+*
-+*********************************************************************************************
-+* DESCRIPTION:
-+* byteswap a word
-+*
-+* INPUT:
-+* Return: NULL
-+*
-+********************************************************************************************/
-+
-+unsigned int dslhal_support_byteSwap32(unsigned int in32Bits);
-+
-+#endif /* Pairs #ifndef DSL_HAL_FUNCTIONDEFINES_H__ */
-diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_version.h linux.dev/drivers/atm/sangam_atm/dsl_hal_version.h
---- linux.old/drivers/atm/sangam_atm/dsl_hal_version.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_version.h 2005-08-23 04:46:50.102842936 +0200
-@@ -0,0 +1,94 @@
-+#ifndef __SYSSW_VERSION_H__
-+#define __SYSSW_VERSION_H__ 1
-+
-+/*******************************************************************************
-+* FILE PURPOSE: DSL Driver API functions for Sangam
-+*
-+********************************************************************************
-+* FILE NAME: dsl_hal_basicapi.c
-+*
-+* DESCRIPTION:
-+* Contains basic DSL HAL APIs for Sangam
-+*
-+* (C) Copyright 2003-04, Texas Instruments, Inc.
-+* History
-+* Date Version Notes
-+* 14May03 0.00.00 RamP Original Version Created
-+* 14May03 0.00.01 RamP Initial Rev numbers inserted
-+* 14May03 0.00.02 RamP Bumped version numbers for Dsl Hal
-+* & dhalapp for alpha plus
-+* 19May03 0.00.03 MCB Bumped dslhal version number
-+* because of dependant changes
-+* wrt. linux-nsp atm drivers.
-+* 22May03 0.00.04 RamP Bumped dslhal & dhalapp buildnum
-+* for inner/outer pair & DGASP code
-+* 06Jun03 0.00.05 RamP Bumped up buildnum for LED, STM,
-+* interrupt processing, statistics
-+* and other pre-beta features
-+* 09Jun03 0.00.06 JEB Fixed error in DHALAPP bugfix/buildnum
-+* 09Jun03 0.00.07 RamP Bumped up buildnum for incremental
-+* changes to apis, statistics, memory
-+* fixes, parameter configurations
-+* 11Jun03 0.00.08 RamP Bumped up buildnum for Co profile
-+* free memory fix
-+* 12Jun03 0.00.09 JEB Bumped version numbers for AR7 1.00 Beta
-+* 02Jul03 0.00.10 ZT Bumped HAL version for overlay page
-+* 18Jul03 0.00.11 RamP Bumped HAL version for analog diags
-+* 22Jul03 0.00.12 JEB Bumped DHALAPP buildnum for analog diags
-+* 31Jul03 0.00.13 RamP Bumped HAL version for engr. drop
-+* 04Aug03 0.00.14 JEB Bumped HAL version buildnum for CHECKPOINT65 changes
-+* Bumped LINUX version buildnum for CHECKPOINT65 changes
-+* 06Aug03 0.00.15 MCB Bumped all version numbers in prep for AR7 1.0 R2 release for POTS.
-+* 13Aug03 0.00.16 MCB Set rev id's for D3/R1.1 (ADSL2).
-+* 21Aug03 0.00.17 JEB Bumped up build numbers for merge of code additions from D1
-+* 26Sep03 0.00.18 JEB Set rev id's for another D3/R1 (ADSL2).
-+* 14Oct03 0.00.19 JEB Bumped Linux minor number and reset bugfix number for release.
-+* Bumped build numbers on DSLHAL and DHALAPP for this checkpoint.
-+* 14Oct03 0.00.20 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT15.
-+* 21Oct03 0.00.21 JEB Bumped build number on DSLHAL for CHECKPOINT16.
-+* 22Oct03 0.00.22 MCB Bumped all version numbers in support of D3R1 release.
-+* 27Oct03 0.00.23 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT19.
-+* Updated version for DSLAGENT to be 02.01.00.01 for ACT 2.1 R0.
-+* 30Oct03 0.00.24 JEB Bumped bugfix number on LINUXATM Version for next release.
-+* Bumped build numbers on DSLHAL and DHALAPP
-+* 31Oct03 0.00.25 MCB Bumped all version numbers in support of D3R2 release.
-+* 14Nov03 0.00.26 JEB Bumped build numbers on DSLHAL and DHALAPP
-+* Changed version for DSLAGENT to be 02.00.01.01 for an ACT 2.0 R0
-+* 20Nov03 0.00.27 JEB Bumped build number on DSLHAL.
-+* Changed version for DSLAGENT to be 02.00.02.00 for the next ACT 2.0 R2
-+* 21Nov03 0.00.28 MCB Bumped all version numbers in support of D3R2 release.
-+* 21Nov03 0.00.29 JEB Bumped build numbers on DSLHAL and DHALAPP for D3-R0 drop on 11/21.
-+* 16Dec03 0.00.30 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT31.
-+* 21Dec03 0.00.31 MCB Bumped all version numbers in support of D3R2 release.
-+* 05Jan04 0.00.32 JEB Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 34.
-+* 15Jan04 0.00.33 JEB Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 36.
-+* 26Jan04 0.00.34 JEB Changed Linux ATM version number to be 04.02.03.00.
-+* 27Jan04 0.00.35 MCB Bumped all version numbers in support of D3R2 release.
-+*******************************************************************************/
-+
-+/* Dsl Hal API Version Numbers */
-+#define DSLHAL_VERSION_MAJOR 03
-+#define DSLHAL_VERSION_MINOR 00
-+#define DSLHAL_VERSION_BUGFIX 06
-+#define DSLHAL_VERSION_BUILDNUM 00
-+#define DSLHAL_VERSION_TIMESTAMP 00
-+
-+/* dhalapp Adam2 Application Version Numbers */
-+#define DHALAPP_VERSION_MAJOR 03
-+#define DHALAPP_VERSION_MINOR 00
-+#define DHALAPP_VERSION_BUGFIX 05
-+#define DHALAPP_VERSION_BUILDNUM 00
-+
-+/* Linux ATM Driver Version Numbers */
-+#define LINUXATM_VERSION_MAJOR 04
-+#define LINUXATM_VERSION_MINOR 02
-+#define LINUXATM_VERSION_BUGFIX 04
-+#define LINUXATM_VERSION_BUILDNUM 00
-+
-+/* DSL Agent Version Numbers */
-+#define DSLAGENT_VERSION_MAJOR 02
-+#define DSLAGENT_VERSION_MINOR 00
-+#define DSLAGENT_VERSION_BUGFIX 02
-+#define DSLAGENT_VERSION_BUILDNUM 00
-+
-+#endif /* pairs with #ifndef __SYSSW_VERSION_H__ */
-diff -urN linux.old/drivers/atm/sangam_atm/ec_errors_cpaal5.h linux.dev/drivers/atm/sangam_atm/ec_errors_cpaal5.h
---- linux.old/drivers/atm/sangam_atm/ec_errors_cpaal5.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/ec_errors_cpaal5.h 2005-08-23 04:46:50.102842936 +0200
-@@ -0,0 +1,118 @@
-+/***************************************************************************
-+ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved.
-+
-+ FILE: ec_errors.h
-+
-+ DESCRIPTION:
-+ This file contains definitions and function declarations for
-+ error code support.
-+
-+ HISTORY:
-+ 14Dec00 MJH Added masking to EC_CLASS etc macros
-+ 17Sep02 GSG Added HAL support (new class&devices)
-+ 03Oct02 GSG Removed C++ style comments
-+***************************************************************************/
-+#ifndef _INC_EC_ERRORS
-+#define _INC_EC_ERRORS
-+
-+/*
-+ 31 - CRITICAL
-+ 30-28 - CLASS (ie. DIAG, KERNEL, FLASH, etc)
-+ 27-24 - INSTANCE (ie. 1, 2, 3, etc )
-+ 23-16 - DEVICE (ie. EMAC, IIC, etc)
-+ 15-08 - FUNCTION (ie. RX, TX, INIT, etc)
-+ 07-00 - ERROR CODE (ie. NO_BASE, FILE_NOT_FOUND, etc )
-+*/
-+
-+/*---------------------------------------------------------------------------
-+ Useful defines for accessing fields within error code
-+---------------------------------------------------------------------------*/
-+#define CRITICAL_SHIFT 31
-+#define CLASS_SHIFT 28
-+#define INST_SHIFT 24
-+#define DEVICE_SHIFT 16
-+#define FUNCTION_SHIFT 8
-+#define ERROR_CODE_SHIFT 0
-+
-+#define CRITICAL_MASK 1
-+#define CLASS_MASK 0x07
-+#define DEVICE_MASK 0xFF
-+#define INST_MASK 0x0F
-+#define FUNCTION_MASK 0xFF
-+#define ERROR_CODE_MASK 0xFF
-+
-+#define EC_CLASS(val) ((val&CLASS_MASK) << CLASS_SHIFT)
-+#define EC_DEVICE(val) ((val&DEVICE_MASK) << DEVICE_SHIFT)
-+#define EC_INST(val) ((val&INST_MASK) << INST_SHIFT)
-+#define EC_FUNC(val) ((val&FUNCTION_MASK) << FUNCTION_SHIFT)
-+#define EC_ERR(val) ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT)
-+
-+/*---------------------------------------------------------------------------
-+ Operation classes
-+---------------------------------------------------------------------------*/
-+#define EC_HAL EC_CLASS(0)
-+#define EC_DIAG EC_CLASS(8)
-+
-+/*---------------------------------------------------------------------------
-+ Device types
-+---------------------------------------------------------------------------*/
-+#define EC_DEV_EMAC EC_DEVICE(1)
-+#define EC_DEV_IIC EC_DEVICE(2)
-+#define EC_DEV_RESET EC_DEVICE(3)
-+#define EC_DEV_ATMSAR EC_DEVICE(4)
-+#define EC_DEV_MEM EC_DEVICE(5)
-+#define EC_DEV_DES EC_DEVICE(6)
-+#define EC_DEV_DMA EC_DEVICE(7)
-+#define EC_DEV_DSP EC_DEVICE(8)
-+#define EC_DEV_TMR EC_DEVICE(9)
-+#define EC_DEV_WDT EC_DEVICE(10)
-+#define EC_DEV_DCL EC_DEVICE(11)
-+#define EC_DEV_BBIF EC_DEVICE(12)
-+#define EC_DEV_PCI EC_DEVICE(13)
-+#define EC_DEV_XBUS EC_DEVICE(14)
-+#define EC_DEV_DSLIF EC_DEVICE(15)
-+#define EC_DEV_USB EC_DEVICE(16)
-+#define EC_DEV_CLKC EC_DEVICE(17)
-+#define EC_DEV_RAPTOR EC_DEVICE(18)
-+#define EC_DEV_DSPC EC_DEVICE(19)
-+#define EC_DEV_INTC EC_DEVICE(20)
-+#define EC_DEV_GPIO EC_DEVICE(21)
-+#define EC_DEV_BIST EC_DEVICE(22)
-+#define EC_DEV_HDLC EC_DEVICE(23)
-+#define EC_DEV_UART EC_DEVICE(24)
-+#define EC_DEV_VOIC EC_DEVICE(25)
-+/* 9.17.02 (new HAL modules) */
-+#define EC_DEV_CPSAR EC_DEVICE(0x1A)
-+#define EC_DEV_AAL5 EC_DEVICE(0x1B)
-+#define EC_DEV_AAL2 EC_DEVICE(0x1C)
-+#define EC_DEV_CPMAC EC_DEVICE(0x1D)
-+#define EC_DEV_VDMA EC_DEVICE(0x1E)
-+#define EC_DEV_VLYNQ EC_DEVICE(0x1F)
-+#define EC_DEV_CPPI EC_DEVICE(0x20)
-+#define EC_DEV_CPMDIO EC_DEVICE(0x21)
-+
-+/*---------------------------------------------------------------------------
-+ Function types
-+---------------------------------------------------------------------------*/
-+#define EC_FUNC_READ_CONF EC_FUNC(1)
-+#define EC_FUNC_INIT EC_FUNC(2)
-+
-+/*---------------------------------------------------------------------------
-+ Error codes
-+---------------------------------------------------------------------------*/
-+#define EC_CRITICAL (1<<CRITICAL_SHIFT)
-+#define EC_NO_ERRORS 0
-+#define EC_VAL_NO_BASE EC_ERR(1)
-+#define EC_VAL_NO_RESET_BIT EC_ERR(2)
-+#define EC_VAL_NO_RESET EC_ERR(3)
-+#define EC_VAL_BAD_BASE EC_ERR(4)
-+#define EC_VAL_MALLOCFAILED EC_ERR(5)
-+#define EC_VAL_NO_RESETBASE EC_ERR(6)
-+#define EC_DEVICE_NOT_FOUND EC_ERR(7)
-+
-+/*---------------------------------------------------------------------------
-+ Function declarations
-+---------------------------------------------------------------------------*/
-+extern void ec_log_error( unsigned int );
-+
-+#endif /* _INC_EC_ERRORS */
-diff -urN linux.old/drivers/atm/sangam_atm/ec_errors_cpsar.h linux.dev/drivers/atm/sangam_atm/ec_errors_cpsar.h
---- linux.old/drivers/atm/sangam_atm/ec_errors_cpsar.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/ec_errors_cpsar.h 2005-08-23 04:46:50.102842936 +0200
-@@ -0,0 +1,118 @@
-+/***************************************************************************
-+ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved.
-+
-+ FILE: ec_errors.h
-+
-+ DESCRIPTION:
-+ This file contains definitions and function declarations for
-+ error code support.
-+
-+ HISTORY:
-+ 14Dec00 MJH Added masking to EC_CLASS etc macros
-+ 17Sep02 GSG Added HAL support (new class&devices)
-+ 03Oct02 GSG Removed C++ style comments
-+***************************************************************************/
-+#ifndef _INC_EC_ERRORS
-+#define _INC_EC_ERRORS
-+
-+/*
-+ 31 - CRITICAL
-+ 30-28 - CLASS (ie. DIAG, KERNEL, FLASH, etc)
-+ 27-24 - INSTANCE (ie. 1, 2, 3, etc )
-+ 23-16 - DEVICE (ie. EMAC, IIC, etc)
-+ 15-08 - FUNCTION (ie. RX, TX, INIT, etc)
-+ 07-00 - ERROR CODE (ie. NO_BASE, FILE_NOT_FOUND, etc )
-+*/
-+
-+/*---------------------------------------------------------------------------
-+ Useful defines for accessing fields within error code
-+---------------------------------------------------------------------------*/
-+#define CRITICAL_SHIFT 31
-+#define CLASS_SHIFT 28
-+#define INST_SHIFT 24
-+#define DEVICE_SHIFT 16
-+#define FUNCTION_SHIFT 8
-+#define ERROR_CODE_SHIFT 0
-+
-+#define CRITICAL_MASK 1
-+#define CLASS_MASK 0x07
-+#define DEVICE_MASK 0xFF
-+#define INST_MASK 0x0F
-+#define FUNCTION_MASK 0xFF
-+#define ERROR_CODE_MASK 0xFF
-+
-+#define EC_CLASS(val) ((val&CLASS_MASK) << CLASS_SHIFT)
-+#define EC_DEVICE(val) ((val&DEVICE_MASK) << DEVICE_SHIFT)
-+#define EC_INST(val) ((val&INST_MASK) << INST_SHIFT)
-+#define EC_FUNC(val) ((val&FUNCTION_MASK) << FUNCTION_SHIFT)
-+#define EC_ERR(val) ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT)
-+
-+/*---------------------------------------------------------------------------
-+ Operation classes
-+---------------------------------------------------------------------------*/
-+#define EC_HAL EC_CLASS(0)
-+#define EC_DIAG EC_CLASS(8)
-+
-+/*---------------------------------------------------------------------------
-+ Device types
-+---------------------------------------------------------------------------*/
-+#define EC_DEV_EMAC EC_DEVICE(1)
-+#define EC_DEV_IIC EC_DEVICE(2)
-+#define EC_DEV_RESET EC_DEVICE(3)
-+#define EC_DEV_ATMSAR EC_DEVICE(4)
-+#define EC_DEV_MEM EC_DEVICE(5)
-+#define EC_DEV_DES EC_DEVICE(6)
-+#define EC_DEV_DMA EC_DEVICE(7)
-+#define EC_DEV_DSP EC_DEVICE(8)
-+#define EC_DEV_TMR EC_DEVICE(9)
-+#define EC_DEV_WDT EC_DEVICE(10)
-+#define EC_DEV_DCL EC_DEVICE(11)
-+#define EC_DEV_BBIF EC_DEVICE(12)
-+#define EC_DEV_PCI EC_DEVICE(13)
-+#define EC_DEV_XBUS EC_DEVICE(14)
-+#define EC_DEV_DSLIF EC_DEVICE(15)
-+#define EC_DEV_USB EC_DEVICE(16)
-+#define EC_DEV_CLKC EC_DEVICE(17)
-+#define EC_DEV_RAPTOR EC_DEVICE(18)
-+#define EC_DEV_DSPC EC_DEVICE(19)
-+#define EC_DEV_INTC EC_DEVICE(20)
-+#define EC_DEV_GPIO EC_DEVICE(21)
-+#define EC_DEV_BIST EC_DEVICE(22)
-+#define EC_DEV_HDLC EC_DEVICE(23)
-+#define EC_DEV_UART EC_DEVICE(24)
-+#define EC_DEV_VOIC EC_DEVICE(25)
-+/* 9.17.02 (new HAL modules) */
-+#define EC_DEV_CPSAR EC_DEVICE(0x1A)
-+#define EC_DEV_AAL5 EC_DEVICE(0x1B)
-+#define EC_DEV_AAL2 EC_DEVICE(0x1C)
-+#define EC_DEV_CPMAC EC_DEVICE(0x1D)
-+#define EC_DEV_VDMA EC_DEVICE(0x1E)
-+#define EC_DEV_VLYNQ EC_DEVICE(0x1F)
-+#define EC_DEV_CPPI EC_DEVICE(0x20)
-+#define EC_DEV_CPMDIO EC_DEVICE(0x21)
-+
-+/*---------------------------------------------------------------------------
-+ Function types
-+---------------------------------------------------------------------------*/
-+#define EC_FUNC_READ_CONF EC_FUNC(1)
-+#define EC_FUNC_INIT EC_FUNC(2)
-+
-+/*---------------------------------------------------------------------------
-+ Error codes
-+---------------------------------------------------------------------------*/
-+#define EC_CRITICAL (1<<CRITICAL_SHIFT)
-+#define EC_NO_ERRORS 0
-+#define EC_VAL_NO_BASE EC_ERR(1)
-+#define EC_VAL_NO_RESET_BIT EC_ERR(2)
-+#define EC_VAL_NO_RESET EC_ERR(3)
-+#define EC_VAL_BAD_BASE EC_ERR(4)
-+#define EC_VAL_MALLOCFAILED EC_ERR(5)
-+#define EC_VAL_NO_RESETBASE EC_ERR(6)
-+#define EC_DEVICE_NOT_FOUND EC_ERR(7)
-+
-+/*---------------------------------------------------------------------------
-+ Function declarations
-+---------------------------------------------------------------------------*/
-+extern void ec_log_error( unsigned int );
-+
-+#endif /* _INC_EC_ERRORS */
-diff -urN linux.old/drivers/atm/sangam_atm/env_def_defines.h linux.dev/drivers/atm/sangam_atm/env_def_defines.h
---- linux.old/drivers/atm/sangam_atm/env_def_defines.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/env_def_defines.h 2005-08-23 04:46:50.103842784 +0200
-@@ -0,0 +1,926 @@
-+#ifndef __ENV_DEF_DEFINES_H__
-+#define __ENV_DEF_DEFINES_H__ 1
-+
-+//********************************************************************
-+//* DMT-BASE ADSL MODEM PROGRAM
-+//* TEXAS INSTRUMENTS PROPRIETARTY INFORMATION
-+//* AMATI CONFIDENTIAL PROPRIETARY
-+//*
-+//* (c) Copyright May 1999, Texas Instruments Incorporated.
-+//* All Rights Reserved.
-+//*
-+//* Property of Texas Instruments Incorporated and Amati Communications Corp.
-+//*
-+//* Restricted Rights - Use, duplication, or disclosure is subject to
-+//* restrictions set forth in TI's and Amati program license agreement and
-+//* associated documentation
-+//*
-+//*********************************************************************
-+//*
-+//* FILENAME: dpsys_defines.h
-+//*
-+//* ABSTRACT: This file provides a mechanism for defining standard
-+//* preprocessor flag sets for datapump.
-+//*
-+//* TARGET: Non specific.
-+//*
-+//* TOOLSET: Non specific.
-+//*
-+//* ACTIVATION:
-+//*
-+//* HISTORY: DATE AUTHOR DESCRIPTION
-+//* 05/11/99 FLW Created
-+//* 01/21/00 FLW derfmake changes
-+//* 02/07/00 FLW/M.Seidl added _debug targets
-+//* 02/23/00 FLW/M.Barnett merged in from G.lite branch
-+//* 03/03/00 FLW/M.Barnett added TRELLIS token
-+//* 05/11/00 Barnett Added ap036btp & ap037btp support.
-+//* 02/07/00 M.Seidl added HW_TEQ, HW_DEC and DC_BIAS tokens
-+//* 02/28/00 Derf/Seidl Mod's in support of suppressing compiler warnings for empty source files
-+//* 02/28/00 M. Seidl added SWTC token
-+//* 02/28/00 M. Seidl added ap0501tp and its _debug target
-+//* 03/03/00 M. Seidl added MODPILOT token, ap0307tp_debug has SWDI and FDD enabled
-+//* 03/08/00 Jack Huang Added HWRSDEC token
-+//* 03/29/00 Derf/Seidl Mod's in support Soft-TC and derfmake
-+//* 04/10/00 Jack Huang Added PCIMASTER token
-+//* 04/11/00 Jack Huang Added STBFIX token
-+//* 04/24/00 M. Seidl ap0500tp has OLAYDP turned on, ap0500tp_debug has OLAYDP turned off now
-+//* 04/28/00 M.Seidl added KAPIL token for ap0501tp targets
-+//* 06/02/00 P.Sexton Added OAM_EOC token
-+//* 06/06/00 M. Seidl added au0501tp target
-+//* 06/12/00 Michael Seidl activated h/w TEQ for KAPIL targets, disabled STBFIX for all targets
-+//* 06/14/00 Derf added ap0308tp, alphabetized token lists
-+//* 06/16/00 Jack Huang added au0501tp_debug target
-+//* 06/22/00 M. Seidl Enabled code overlays through EMIF from external memory. Now there are 3
-+//* different code overlay schemes that are differentiated by the following tokens:
-+//* OLAYDP_PCI: uses PCI DMA in PCI Master Mode
-+//* OLAYDP_HOST: Host downloads overlay code into DMEM upon request from DSP
-+//* OLAYDP_EMIF: Host downloads overlay code into ext. mem at boot-time. DSP uses
-+//* DMA channel 0 to load code into on-chip PMEM
-+//* OLAYDP: turns overlays generally on or off
-+//* 07/15/00 B.Srinivasan Cleaned up default tokens and tokens for au0501tp, au0501tp_debug,
-+//* ap0501tp and ap0501tp_debug targets as well
-+//* 07/19/00 B.Srinivasan Made changes w.r.t cleaning/fixing Rufus Interrupt related code
-+//* (changed token TC_INTRPT_RUFUS to INTRPT_RUFUS
-+//* 06/14/00 Derf added au0501cp
-+//* 08/12/00 Yinong Ding Added DPLL_MODE token.
-+//* 08/16/00 F. Mujica Moved DOUBLE_XMT_RATE, RX_HPF, and LEAKY_LMS tokens here.
-+//* 09/05/00 M. Seidl Changed ap0501tp back to do overlay through PCI (OLAY_PCI = 1)
-+//* 09/11/00 M. Seidl moved USB and OLAYDP_HOST definitions to be CHIPSET specific, not target specific
-+//* 09/21/00 U.Dasgupta/ Added a token for separate transmit and receive buffers.
-+//* F.Mujica (SEPARATE_TX_RX_BUFFERS).
-+//* 10/02/00 U.Dasgupta/ Added DPLL and SEPARATE_TX_RX_BUFFER tokens for au0502 target.
-+//* F.Mujica
-+//* 10/02/00 M. Castellano Added new tokens for new Host/EMIF DSP code overlay.
-+//* OLAYDP_2STEP: Host downloads overlay code into ext. mem upon DSP request. DSP
-+//* DMA channel 0 to load code into on-chip PMEM. It is a somewhat hybrid version
-+//* of OLAYDP_HOST and OLAYDP_EMIF. The test target is ap0502tp.
-+//* 10/25/00 Balaji Added tokens for arv500tp target
-+//* 10/31/00 U. Iyer Added TEQ_AVG token and set it one for Ax5
-+//* 11/02/00 Barnett Added OAM_EOC=0 in defaults at bottom of file.
-+//* 11/21/00 M. Seidl turned OLAYDP and AOC off for ap0307tp to make binary compatible w. whql'ed driver
-+//* 11/28/00 Paul Hunt added FASTRETRAIN token for fast retrain specific code
-+//* 11/28/00 Paul Hunt added PILOTDATA token to control channel estimation and transmission
-+//* of data on the upstream pilot tone for ITU standard code loads
-+//* 12/20/00 Jack Huang added EIGHTBITSRAM toekn for the targets that use 8-bit SRAM for
-+//* interleaver/deinterleaver
-+//* 01/11/01 U.Dasgupta Added mp targets and cleaned up GHS/PILOTDATA variables
-+//* 01/23/01 U.Dasgupta Cleaned up code within GLITE tokens
-+//* 01/23/00 Barnett Added in full EOC support for AP3/Ax5. Got rid of UTC. No longer needed.
-+//* 02/08/01 Barnett Added DDC token.
-+//* 03/09/01 Nirmal Warke Added in TOKEN definition for line diagnostics (LINE_DIAG): IMP DEPENDENCIES -
-+//* TEQ_AVG must be off when LINE_DIAG is on (since they share a union buffer at the same time)
-+//* 03/13/01 M. Seidl Recovered ap0500tp target. Added GHS token as PMEM saving option
-+//* 03/14/01 Barnett Added ap0500mb target support. Look-and-feel is similar to ap0500tp.
-+//* Added seperate-but-equal def's wrt. ISDN Annex B, Annex C, and PROP.
-+//* 03/14/01 J. Bergsagel Added EXTERNBERT token.
-+//* 03/15/01 Barnett/Balaji Merged AR5(H) -> 03.00.00 datapump.
-+//* 03/16/01 Nirmal Warke Added in TOKEN definition for crosstalk performance mods (CROSSTALK): IMP DEPENDENCIES -
-+//* TEQ_AVG must be off and LEAKY_LMS must be on when CROSSTALK is on
-+//* 03/21/01 Barnett Added support for ar0500lp, ar0500mp, ar0500dp, arv500lp, arv500mp, and arv500dp.
-+//* 03/26/01 M. Seidl enabled 64pt IFFT for ap0500mb (Raptor+AD11, FDM)
-+//* 03/28/01 J. Bergsagel Removed EXTERNBERT token (now use host intf. var. instead)
-+//* 04/03/01 J. Bergsagel Removed condition of DSPDP_CHIPSET_GEN==5 for default defines
-+//* Removed LEAKY_LMS token (assumed always 1)
-+//* Removed OLAYDP_HOST token (assumed always 0)
-+//* Removed RX_HPF token (assumed always 1)
-+//* Removed TRIBRID token (not used any more)
-+//* Removed FDD token (assumed always 1)
-+//* Removed HW_DEC token (assumed always 1)
-+//* Removed HW_TEQ token (assumed always 1)
-+//* Removed HWRSDEC token (assumed always 1)
-+//* Removed ILEC_AD11_ALCATEL337 token (assumed always 0)
-+//* Removed ILEC_AD11_HDSLNOISEFIX token (assumed always 0)
-+//* Removed ILEC_AD11_MODULATEPILOT token (assumed always 0)
-+//* Removed ILEC_AD11_NEWINTERPOLATE token (assumed always 0)
-+//* Removed ILEC_AD11_USTXHPF token (assumed always 0)
-+//* Removed SWDI token (assumed always 1)
-+//* Removed TD_AGC token (assumed always 1)
-+//* Removed DSPDP_LEGACY_TARGET token (assumed always 0)
-+//* Removed AD11_20, AD11_20NL and AD11_20_NEWPREC token (always 1)
-+//* Removed AI token (assumed always 1)
-+//* Removed ATUC token (assumed always 0)
-+//* Removed EU token (assumed always 0)
-+//* Removed EVM2 token (assumed always 0)
-+//* Removed INTRPT_RUFUS token (assumed always 0)
-+//* Removed MODPILOT token (assumed always 0)
-+//* Removed SL and SL_EVM tokens (assumed always 0)
-+//* Removed STBIFX token (assumed always 0)
-+//* Removed STD token (assumed always 1)
-+//* Removed SWDI_LOOPBACK token (assumed always 0)
-+//* Removed TID token (assumed always 0)
-+//* Removed TII token (assumed always 1)
-+//* Removed TIPCI token (assumed always 1)
-+//* Removed UDI token (assumed always 1)
-+//* Removed DC_BIAS token (assumed always 1)
-+//* 04/05/01 Barnett Added DSPDP_ prefix to tokens that originate
-+//* in the public interface.
-+//* 05/07/01 Jack Huang Removed DOUBLE_XMT_RATE token.
-+//* 05/16/01 Barnett Added back in EXTERNBERT token in support
-+//* of saving PMEM.
-+//* 06/05/01 Jack Huang Fixed the rules for ar0500mp_debug target
-+//* 04/23/01 M. Halleck Merge Astro Wu's DDC enhancements
-+//* 06/05/01 M. Capps Changed DSP_DEBUG to ENHANCED_SERIAL_DEBUG
-+//* 07/03/01 M. Capps Replaced ESD token with !DDC, added DEV_DEBUG
-+//* 06/26/01 J. Bergsagel Removed all the old ap03... stuff
-+//* Removed OLAYDP_HOST token (again)
-+//* Removed CROSSTALK token (assumed always 1)
-+//* Removed TEQ_AVG token (assumed always 0)
-+//* Removed DE token (assumed always 1)
-+//* Removed PVAT token and au0501cp target
-+//* Removed FASTRETRAIN token (assumed always 0)
-+//* 07/05/01 J. Bergsagel Changed PCIMASTER token to TC_ATM_PCIMASTER
-+//* 07/20/01 Umesh Iyer Added ATMBERT token. ATMBERT is conditional on SWTC definition. if SWTC is 0
-+//* ATMBERT should be 0. Else it can be 0/1. Default 0.
-+//* 07/23/01 J. Bergsagel Changed name from defines_u.h to dpsys_defines.h
-+//* 07/24/01 Barnett Added support for build of $(TARGET)_diag mfgr'ing targets.
-+//* 08/02/01 Michael Seidl renamed KAPIL token to !AD1X
-+//* 08/02/01 Michael Seidl renamed GHS token to PMEMSAVE_GHS
-+//* 08/03/01 S.Yim Added MFGR_DIAG token for afe diagnostic
-+//* Added AFEDEV token for afe device driver
-+//* Added DSPBIOSII token for dsp bios
-+//* 09/21/01 Sameer Enable EXTERNBERT. Disable ATMBERT.
-+//* 10/01/01 U.Dasgupta Turned off SMART_MARGIN for ap0500mb because of FECs/CRCs;
-+//* 10/09/01 Barnett Added support for ar0500db.
-+//* 10/12/01 Barnett Disable EXTERNBERT.
-+//* 10/15/01 Barnett Turn off SMART_MARGIN.
-+//* 11/07/01 Barnett Def'ed ISDN_DEBUG for all targets to avoid compiler warnings.
-+//* Assumed defaul value is zero.
-+//* 11/13/01 Barnett Reworked ar0500db_debug to build JTAG-bootable load.
-+//* The equivalent production target should only be flash-bootable.
-+//* 01/11/02 Yim Added TOKEN JTAG to build JTAG load ar0500db_diag.
-+//* 01/23/02 U Iyer Added DEBUG_LOG token. Default value 0
-+//* 01/31/02 Barnett Added support for ar0700mp target.
-+//* 02/04/02 S.Yim Added TOKEN JTAG to build JTAG load ar0500mp_diag
-+//* 02/11/02 U Iyer Added MARGIN_DELTA_RETRAIN token. Default value 1
-+//* 05/15/02 Sameer V Enabled EXTERNBERT token for AR5 and AU5 platforms. EXTERNBERT is
-+//* not supported on AR5H.
-+//* 02/14/02 Barnett Don't ref the SWTC feature token if mfgr'ing diag target.
-+//* 02/19/02 Yim Added support to build au0502db_diag target.
-+//* 03/08/02 Nirmal Warke Added feature token HYBRID_SWITCH
-+//* 03/15/02 U G Jani Turned ON Bitswap support for AU5I (au0502db) targets.
-+//* 04/08/02 U G Jani Enabled NLNOISEADJSNR token for AU5I targets.
-+//* 06/24/02 Seungmok Oh Added PERTONE_EQ token support for those targets:
-+//* (ar0500mp_debug, au0502mp_debug, ar0500mp, au0502mp)
-+//* 06/26/02 Mallesh Added DS_PWR_CUTBACK token. Default value 1.
-+//* 06/27/02 Mallesh Changed default value of DS_PWR_CUTBACK token to 0.
-+//* 06/29/02 U.Dasgupta Token cleanup: Removed ISDN_DEBUG token
-+//* 04/29/02 Mannering Remove EIGHTBITSRAM, Combined DOUBLEBUFFER with
-+//* BITSWAP, added FPGA token
-+//* 05/03/02 Mannering cleanup token changed by the new routine names
-+//* 05/06/02 Mannering Add tokens OUTBAND and INBAND for codec commands
-+//* If both OUTBAND and INBAND are 0 codec register are
-+//* memory mapped.
-+//* 05/29/2002 S.Yim Removed AD1X, AFEDEV
-+//* 08/31/2002 Paul Hunt Added PERTONE_EQ and HYBRID_SWITCH for ar0700mp
-+//* 09/12/2002 Paul Hunt Added support for ar0700db target.
-+//* 08/07/2002 U.Dasgupta Turned off MARGIN_DELTA_RETRAIN feature for ISDN platforms
-+//* 11/14/2002 Paul Hunt Merged AX5 MR6 PC modifications into AR7 codebase, specifically
-+//* turned off MARGIN_DELTA_RETRAIN feature for ar0700db target
-+//* 08/26/2002 N. Warke Added DUAL_TEQ token. Active only for Ax7 target
-+//* 09/26/2002 Mannering Add token CODEC_EMU for codec emulator board
-+//* 10/15/2002 Iyer/Molla Added DMT_BIS token for DELT support
-+//* 10/21/2002 A. Redfern Added PHY_EC_ENABLE and PHY_PATH_ENABLE tokens
-+//* 10/23/2002 A. Redfern Removed LINE_DIAG token
-+//* 10/28/2002 J. Bergsagel Cleaned up old targets and cleaned up the token list
-+//* 10/30/2002 A. Redfern Added PHY_TDW_ENABLE
-+//* 11/01/2002 A. Redfern Removed SMART_MARGIN token
-+//* 11/01/2002 Mustafa Turned on SPECTRAL_SHAPING features for Lucent AnyMedia O.69 Interop.
-+//* 11/15/2002 Yim/Mannering Added CODEC_EMU token for analog emulation board specifics
-+//* 11/15/2002 Iyer/Molla Added DEBUG_DELT and MEM_STR token to support DELT debug
-+//* 12/27/2002 Sameer V Added ATM_TC_HW token for Sangam.
-+//* 01/06/2003 J. Bergsagel Added default values for NLNOISEADJSNR, ARTT and DS_PWR_CUTBACK
-+//* 01/07/2003 S.Yim Modified ar0700db_diag target to turn on ISDN token
-+//* 01/22/2003 J. Bergsagel Added back in defines for the debug targets.
-+//* 01/21/2003 MCB Implemented Ax7 UNIT-MODULE modular software framework.
-+//* 01/31/2003 J. Bergsagel Made debug targets to be for the FPGA platform; non-debug for Sangam.
-+//* Turned off DUAL_TEQ, PHY_EC_ENABLE and PHY_PATH_ENABLE by default
-+//* for the Sangam (non-debug) targets.
-+//* Turned off OLAYDP token by default.
-+//* Turned off SWTC and turned on ATM_TC_HW by default for Sangam targets.
-+//* 01/29/2003 Sameer V Added ATMBERT_HW token for Sangam.
-+//* 02/04/2003 D. Mannering Added CO_PROFILE token
-+//* 02/19/2003 Sameer V Added back EXTERNBERT token for ar0700mp_dp and ar0700db_dp targets.
-+//* Disabled EXTERNBERT for debug target since it is not supported on the
-+//* FPGA platform.
-+//* 02/21/2003 A. Redfern Turned off OAM_EOC, AOC and BITSWAP (until memory issues are resolved).
-+//* Turned on DUAL_TEQ, PHY_PATH_ENABLE and PHY_EC_ENABLE.
-+//* 02/21/2003 D. Mannering Added DEBUG_DUMP.
-+//* 03/06/2003 J. Bergsagel Cleaned up tokens for each target and switched diag targets
-+//* over to the Sangam platform (instead of the FPGA platform).
-+//* 03/07/2003 J. Bergsagel Cleaned up TC and BERT tokens
-+//* 03/11/2003 J. Bergsagel Turned on AOC and BITSWAP for Sangam POTS and ISDN targets.
-+//* 03/20/2003 Mallesh Added SHALF token.
-+//* 03/24/2003 F. Mujica Enable hybrid selection
-+//* 03/26/2003 A. Redfern Removed PMEMSAVE_GHS (always = 1).
-+//* 04/08/2003 F. Mujica Renamed HYBRID_SWITCH token to PHY_HYB_ENABLE
-+//* 04/08/2003 J. Bergsagel Turned off PHY_HYB_ENABLE for _debug targets (FPGA board builds)
-+//* 04/09/2003 J. Bergsagel Turned on OLAYDP only for ar0700mp and ar0700db.
-+//* Turned on AOC, BITSWAP, and OAM_EOC for ar0700mp and ar0700db.
-+//* 04/09/2003 J. Bergsagel Corrected name "PHY_HYB_SELECT" to "PHY_HYB_ENABLE"
-+//* 04/15/2003 A. Redfern Turned on ECI_PULSECOM_INTEROP because phase optimization was enabled.
-+//* 05/05/2003 D. Mannering Review Comments - turn on AOC, EXTERNBERT, SHALF, for ar0700mp; amd
-+//* turn on AOC for ar0700db
-+//* 05/11/2003 Prashant S Added DMT_BIS token for AR7 Soft DI work
-+//* 05/13/2003 J. Bergsagel Turned on IMPROVED_STAT_SUPPORT_06_03_00 by default for necessary statistics
-+//* 05/15/2003 J. Bergsagel Turned off CO_PROFILE for diag targets.
-+//* 05/27/2003 U.Dasgupta Added NLNOISEADJSNR_EC token for ISDN - to take care of non-linear noise
-+//* (from ISDN splitter) compensation.
-+//* 06/02/2003 Z. Yang Added PHY_NDIAG_ENABLE token.
-+//* 06/02/2003 Z. Yang Added COMB_LINEDIAG_ENABLE token.
-+//* 06/05/2003 P. Hunt Turned on ATUC_CLEARDOWN_CHANGE token for all targets.
-+//* 06/05/2003 Mallesh Turned on CENTILLIUM_VENDORID_AND_TXRATE_CHNG to enable logging the vendor ID
-+//* for centillium and litespan
-+//* 06/05/2003 U.Dasgupta Turned on SHALF token for ISDN.
-+//* 06/06/2003 U.Dasgupta Turned on G.hs nonstandard field token for ar0700db target.
-+//* 06/12/2003 J. Bergsagel Changed *_debug targets to be for JTAG=1 instead of FPGA targets
-+//* IMPORTANT: For non-JTAG cases, "JTAG" should be undefined.
-+//* Therefore, "JTAG" should not have a default case at the bottom (JTAG 0)
-+//* 06/18/2003 A. Redfern Turned on spectral shaping token for all targets.
-+//* 06/23/2003 J. Bergsagel Turned off GHS_NON_STD_FIELD token for ar0700db until bugs are fixed.
-+//* 06/23/2003 U G Jani Undid the above change since the bug is fixed.
-+//* 06/27/2003 Mallesh Removed all the interop tokens which are no longer required.
-+//* 08/20/2003 J. Bergsagel Added default value for OVHD_PMDTEST_PARA and put default section
-+//* tokens in alphabetical order.
-+//* 10/09/2003 Hanyu Liu Defined token ADSL2_1BIT_TONE to support Rx one bit constellation.
-+//* 10/12/2003 Hanyu Liu Defined token ADSL2_BSWP for bitswap.
-+//* 10/20/2003 Xiaohui Li Added READSL2_ENABLE token.
-+//* 12/01/2003 Seungmok Oh Added TXDF2B_PROFILING token, which is active only for POTS target.
-+//* 12/09/2003 Jack Huang Turned on GHS_NON_STD_FIELD support for AR7 POTS targets
-+//* 12/16/2003 Mustafa T. Added the necessary definitions for diag target.
-+//*****************************************************************************************************
-+//*
-+//* The default flag settings are:
-+//*
-+//* -dATUC=1 -dSTD=0 -dISDN=0 -dTIPCI=0 -dTID=0 -dTII=0 -dAI=0
-+//* -dEVM2=0 -dEU=0 -dSL=0 -dSL_EVM=1 -dGLITE=0
-+//*
-+//* and are set after all the per-suffix options have had a chance to
-+//* set them. Each flag is only set if it has not previously been set, so
-+//* per-suffix settings can override defaults, and command-line defines can
-+//* override per-suffix settings.
-+//*
-+//*****************************************************************************
-+
-+
-+//* ===========================================================================
-+//* Suffix codes
-+//* The command-line can include -dOBJSFX_xxx to get a flag set
-+//* instead of explicitly setting each flag on each CC/ASM command-line.
-+//* and the object suffix will control the settings of "feature" constants.
-+//* ===========================================================================
-+//
-+//* ===========================================================================
-+// Flag settings for new suffixes (in alphabetical order of suffix)
-+// Each suffix has to specify only those flags which differ from the
-+// default settings.
-+//* ===========================================================================
-+// NOTE: Try to keep feature flags in alphabetical order to ease maintenance.
-+//* ===========================================================================
-+//*
-+
-+#define CHIPSET_ID_UNKN '?'
-+#define CHIPSET_ID_AH 'H'
-+#define CHIPSET_ID_AP 'P'
-+#define CHIPSET_ID_AR 'R'
-+#define CHIPSET_ID_ARV 'R'
-+#define CHIPSET_ID_AT 'T'
-+#define CHIPSET_ID_AU 'U'
-+
-+#define CHIPSET_ID2_GENERIC '0'
-+#define CHIPSET_ID2_ARV 'R'
-+
-+ #define DSPDP_IMAGE_ID_STANDARD(code) ( \
-+ STANDARD_is_MULTIMODE(code) ? "M" : \
-+ STANDARD_is_GDMT(code) ? "D" : \
-+ STANDARD_is_GLITE(code) ? "L" : \
-+ STANDARD_is_T1413(code) ? "T" : "_")
-+
-+ #define DSPDP_IMAGE_ID_SERVICE(code) ( \
-+ SERVICE_is_POTS(code) ? "P" : \
-+ SERVICE_is_ISDN_ANNEXB(code) ? "B" : \
-+ SERVICE_is_ISDN_ANNEXC(code) ? "C" : \
-+ SERVICE_is_ISDN_PROP(code) ? "I" : "")
-+
-+// Bit-codes for feature byte in new version.
-+//
-+// 0000 0000
-+// |||| ||||
-+// |||| |||+ -- POTS
-+// |||| ||+---- ISDN_ANNEXB
-+// |||| |+----- ISDN_ANNEXC
-+// |||| +------ ISDN_PROP
-+// |||+--------
-+// ||+--------- GHS
-+// |+---------- GLITE
-+// +----------- T1413
-+//
-+//
-+#define FEATURE_BIT_T1413 0x80
-+#define FEATURE_BIT_GLITE 0x40
-+#define FEATURE_BIT_GHS 0x20
-+#define FEATURE_BIT_ISDN_PROP 0x08
-+#define FEATURE_BIT_ISDN_ANNEXC 0x04
-+#define FEATURE_BIT_ISDN_ANNEXB 0x02
-+#define FEATURE_BIT_POTS 0x01
-+
-+#define STANDARD_BITS_MASK (FEATURE_BIT_T1413 | FEATURE_BIT_GLITE | FEATURE_BIT_GHS)
-+#define STANDARD_BITS_T1413 FEATURE_BIT_T1413
-+#define STANDARD_BITS_GHS FEATURE_BIT_GHS
-+#define STANDARD_BITS_GLITE (FEATURE_BIT_GLITE | FEATURE_BIT_GHS)
-+#define STANDARD_BITS_GDMT (STANDARD_BITS_T1413 | STANDARD_BITS_GHS)
-+#define STANDARD_BITS_MULTIMODE (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT)
-+
-+#define SERVICE_BIT_ISDN_ANNEXB FEATURE_BIT_ISDN_ANNEXB
-+#define SERVICE_BIT_ISDN_ANNEXC FEATURE_BIT_ISDN_ANNEXC
-+#define SERVICE_BIT_ISDN_PROP FEATURE_BIT_ISDN_PROP
-+#define SERVICE_BIT_POTS FEATURE_BIT_POTS
-+
-+//
-+// Debug new-style suffixes
-+//
-+//
-+
-+#if defined(OBJSFX_ar0700db_debugobj)
-+#ifndef OBJSFX_ar0700dbobj
-+#define OBJSFX_ar0700dbobj 1
-+#endif
-+// Here, in alphabetic order, are the feature tokens that
-+// distinguish this suffix from its non-_debug partner:
-+// (All other tokens from the non-_debug partner that are non-conflicting will also be picked up)
-+
-+#ifndef JTAG
-+#define JTAG 1
-+#endif
-+
-+#elif defined(OBJSFX_ar0700mp_debugobj)
-+#ifndef OBJSFX_ar0700mpobj
-+#define OBJSFX_ar0700mpobj 1
-+#endif
-+// Here, in alphabetic order, are the feature tokens that
-+// distinguish this suffix from its non-_debug partner:
-+// (All other tokens from the non-_debug partner that are non-conflicting will also be picked up)
-+
-+#ifndef ADSL2_BSWP
-+#define ADSL2_BSWP 1
-+#endif
-+#ifndef AOC
-+#define AOC 1
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 1
-+#endif
-+#ifndef DEBUG_ADSL2
-+#define DEBUG_ADSL2 0
-+#endif
-+#ifndef DEBUG_LOG
-+#define DEBUG_LOG 0
-+#endif
-+#ifndef GHS_NON_STD_FIELD
-+#define GHS_NON_STD_FIELD 1
-+#endif
-+#ifndef JTAG
-+#define JTAG 1
-+#endif
-+#endif // end of the series of "#elif defined" for debug targets
-+
-+
-+//
-+// Standard new-style suffixes for operational and mfgr'ing diag.
-+//
-+
-+#if defined(OBJSFX_ar0700dbobj)
-+#define CHIPSET_AR07 1
-+#define PLATFORM_AR0700 1
-+#define DSPDP_CHIPSET_ID CHIPSET_ID_AR
-+#define DSPDP_CHIPSET_ID2 CHIPSET_ID2_GENERIC
-+#define DSPDP_CHIPSET_GEN 7
-+#define DSPDP_HARDWARE_REV1 '0'
-+#define DSPDP_HARDWARE_REV2 '0'
-+#define DSPDP_FEATURE_CODE (STANDARD_BITS_GDMT|SERVICE_BIT_ISDN_ANNEXB)
-+#ifndef AOC
-+#define AOC 1
-+#endif
-+// ATM_TC_HW and SWTC are mutually exclusive
-+#ifndef ATM_TC_HW
-+#define ATM_TC_HW 1
-+#endif
-+#ifndef SWTC
-+#define SWTC 0
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 1
-+#endif
-+#ifndef EXTERNBERT
-+#define EXTERNBERT 0
-+#endif
-+#ifndef GHS_NON_STD_FIELD
-+#define GHS_NON_STD_FIELD 1
-+#endif
-+#ifndef MARGIN_DELTA_RETRAIN
-+#define MARGIN_DELTA_RETRAIN 0
-+#endif
-+#ifndef NLNOISEADJSNR_EC
-+#define NLNOISEADJSNR_EC 1
-+#endif
-+#ifndef OLAYDP
-+#define OLAYDP 1
-+#endif
-+#ifndef SHALF
-+#define SHALF 1
-+#endif
-+
-+
-+#elif defined(OBJSFX_ar0700db_diagobj)
-+#define CHIPSET_AR07 1
-+#define PLATFORM_AR0700 1
-+#define DSPDP_CHIPSET_ID CHIPSET_ID_AR
-+#define DSPDP_CHIPSET_ID2 CHIPSET_ID2_GENERIC
-+#define DSPDP_CHIPSET_GEN 7
-+#define DSPDP_HARDWARE_REV1 '0'
-+#define DSPDP_HARDWARE_REV2 '0'
-+#define DSPDP_FEATURE_CODE (STANDARD_BITS_GDMT|SERVICE_BIT_ISDN_ANNEXB)
-+#ifndef AOC
-+#define AOC 0
-+#endif
-+// ATM_TC_HW and SWTC are mutually exclusive (or both must be off)
-+#ifndef ATM_TC_HW
-+#define ATM_TC_HW 0
-+#endif
-+#ifndef SWTC
-+#define SWTC 0
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 0
-+#endif
-+#ifndef CO_PROFILE
-+#define CO_PROFILE 0
-+#endif
-+#ifndef MARGIN_DELTA_RETRAIN
-+#define MARGIN_DELTA_RETRAIN 0
-+#endif
-+#ifndef MFGR_DIAG
-+#define MFGR_DIAG 1
-+#endif
-+#ifndef OAM_EOC
-+#define OAM_EOC 0
-+#endif
-+#ifndef OLAYDP
-+#define OLAYDP 0
-+#endif
-+#ifndef SNR_UPDATE
-+#define SNR_UPDATE 0
-+#endif
-+
-+#elif defined(OBJSFX_ar0700mpobj)
-+#define CHIPSET_AR07 1
-+#define PLATFORM_AR0700 1
-+#define DSPDP_CHIPSET_ID CHIPSET_ID_AR
-+#define DSPDP_CHIPSET_ID2 CHIPSET_ID2_GENERIC
-+#define DSPDP_CHIPSET_GEN 7
-+#define DSPDP_HARDWARE_REV1 '0'
-+#define DSPDP_HARDWARE_REV2 '0'
-+#define DSPDP_FEATURE_CODE (STANDARD_BITS_MULTIMODE|SERVICE_BIT_POTS)
-+#ifndef AOC
-+#define AOC 1
-+#endif
-+// ATM_TC_HW and SWTC are mutually exclusive
-+#ifndef ADSL2_1BIT_TONE
-+#define ADSL2_1BIT_TONE 0
-+#endif
-+#ifndef ADSL2_BSWP
-+#define ADSL2_BSWP 1
-+#endif
-+#ifndef ATM_TC_HW
-+#define ATM_TC_HW 1
-+#endif
-+#ifndef SWTC
-+#define SWTC 0
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 1
-+#endif
-+#ifndef EXTERNBERT
-+#define EXTERNBERT 0
-+#endif
-+#ifndef OLAYDP
-+#define OLAYDP 1
-+#endif
-+#ifndef DMT_BIS
-+#define DMT_BIS 1
-+#endif
-+#ifndef SHALF
-+#define SHALF 1
-+#endif
-+#ifndef MEM_STR
-+#define MEM_STR 0
-+#endif
-+#ifndef DS_LOOP_BACK
-+#define DS_LOOP_BACK 0
-+#endif
-+#ifndef LOOP_BACK_DEBUG
-+#define LOOP_BACK_DEBUG 0
-+#endif
-+#ifndef US_LOOP_BACK
-+#define US_LOOP_BACK 0
-+#endif
-+#ifndef OVHD_PMDTEST_PARA
-+#define OVHD_PMDTEST_PARA 0
-+#endif
-+#ifndef DS_RX_CODEWORD
-+#define DS_RX_CODEWORD 1
-+#endif
-+#ifndef READSL2_ENABLE
-+#define READSL2_ENABLE 1
-+#endif
-+#ifndef GHS_NON_STD_FIELD
-+#define GHS_NON_STD_FIELD 1
-+#endif
-+
-+#elif defined(OBJSFX_ar0700mp_diagobj)
-+#define CHIPSET_AR07 1
-+#define PLATFORM_AR0700 1
-+#define DSPDP_CHIPSET_ID CHIPSET_ID_AR
-+#define DSPDP_CHIPSET_ID2 CHIPSET_ID2_GENERIC
-+#define DSPDP_CHIPSET_GEN 7
-+#define DSPDP_HARDWARE_REV1 '0'
-+#define DSPDP_HARDWARE_REV2 '0'
-+#define DSPDP_FEATURE_CODE (STANDARD_BITS_MULTIMODE|SERVICE_BIT_POTS)
-+#ifndef ADSL2_BSWP
-+#define ADSL2_BSWP 0
-+#endif
-+#ifndef AOC
-+#define AOC 0
-+#endif
-+// ATM_TC_HW and SWTC are mutually exclusive (or both must be off)
-+#ifndef ATM_TC_HW
-+#define ATM_TC_HW 0
-+#endif
-+#ifndef SWTC
-+#define SWTC 0
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 0
-+#endif
-+#ifndef CO_PROFILE
-+#define CO_PROFILE 0
-+#endif
-+#ifndef DMT_BIS
-+#define DMT_BIS 0
-+#endif
-+#ifndef MARGIN_DELTA_RETRAIN
-+#define MARGIN_DELTA_RETRAIN 0
-+#endif
-+#ifndef MFGR_DIAG
-+#define MFGR_DIAG 1
-+#endif
-+#ifndef OAM_EOC
-+#define OAM_EOC 0
-+#endif
-+#ifndef OLAYDP
-+#define OLAYDP 0
-+#endif
-+#ifndef SNR_UPDATE
-+#define SNR_UPDATE 0
-+#endif
-+#ifndef US_CRC_RETRAIN
-+#define US_CRC_RETRAIN 0
-+#endif
-+#ifndef ADSL2_BSWP
-+#define ADSL2_BSWP 0
-+#endif
-+#ifndef DMT_BIS
-+#define DMT_BIS 0
-+#endif
-+#ifndef DS_RX_CODEWORD
-+#define DS_RX_CODEWORD 0
-+#endif
-+
-+#else
-+#define DSPDP_CHIPSET_ID CHIPSET_ID_UNKN
-+#define DSPDP_CHIPSET_ID2 CHIPSET_ID2_GENERIC
-+#define DSPDP_CHIPSET_GEN 0
-+#define DSPDP_HARDWARE_REV1 '0'
-+#define DSPDP_HARDWARE_REV2 '0'
-+#define DSPDP_FEATURE_CODE 0
-+#endif
-+
-+// For use in checking the code in drivers -- indented to avoid .h->.ah
-+ #define STANDARD_is_T1413(code) (!(((code) & STANDARD_BITS_MASK) ^ STANDARD_BITS_T1413))
-+ #define STANDARD_is_GLITE(code) (!(((code) & STANDARD_BITS_MASK) ^ STANDARD_BITS_GLITE))
-+ #define STANDARD_is_GHS(code) (((code) & STANDARD_BITS_MASK) & STANDARD_BITS_GHS)
-+ #define STANDARD_is_GDMT(code) (!(((code) & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GHS)))
-+ #define STANDARD_is_MULTIMODE(code) (!(((code) & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT)))
-+ #define SERVICE_is_POTS(code) ((code) & SERVICE_BIT_POTS)
-+ #define SERVICE_is_ISDN_ANNEXB(code) ((code) & SERVICE_BIT_ISDN_ANNEXB)
-+ #define SERVICE_is_ISDN_ANNEXC(code) ((code) & SERVICE_BIT_ISDN_ANNEXC)
-+ #define SERVICE_is_ISDN_PROP(code) ((code) & SERVICE_BIT_ISDN_PROP)
-+
-+#define STANDARD_T1413 (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ STANDARD_BITS_T1413))
-+#define STANDARD_GLITE (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ STANDARD_BITS_GLITE))
-+#define STANDARD_GHS ((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) & STANDARD_BITS_GHS)
-+#define STANDARD_GDMT (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GHS)))
-+#define STANDARD_MULTIMODE (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT)))
-+
-+#define SERVICE_POTS (DSPDP_FEATURE_CODE & SERVICE_BIT_POTS)
-+#define SERVICE_ISDN_ANNEXB (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_ANNEXB)
-+#define SERVICE_ISDN_ANNEXC (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_ANNEXC)
-+#define SERVICE_ISDN_PROP (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_PROP)
-+#define SERVICE_ISDN (SERVICE_ISDN_ANNEXB | SERVICE_ISDN_ANNEXC | SERVICE_ISDN_PROP)
-+
-+
-+//
-+// Backwards compatibility with old tokens
-+//
-+
-+#if (SERVICE_POTS)
-+#ifndef ISDN
-+#define ISDN 0
-+#endif
-+#endif
-+
-+#if (SERVICE_ISDN_ANNEXB | SERVICE_ISDN_PROP)
-+#ifndef ISDN
-+#define ISDN 1
-+#endif
-+#endif
-+
-+
-+//
-+//* ===========================================================================
-+// More Default settings
-+//* ===========================================================================
-+//
-+
-+//
-+// BEGIN Could automatically generate showdefs code
-+//
-+#ifndef AOC
-+#define AOC 1
-+#endif
-+#ifndef ARTT
-+#define ARTT 0
-+#endif
-+#ifndef ATMBERT
-+#define ATMBERT 0
-+#endif
-+// ATM_TC_HW and SWTC are mutually exclusive
-+#ifndef ATM_TC_HW
-+#define ATM_TC_HW 1
-+#endif
-+#if ATM_TC_HW
-+#ifndef ATMBERT_HW
-+#define ATMBERT_HW 1
-+#endif
-+#ifndef SWTC
-+#define SWTC 0
-+#endif
-+#else // else case for #if ATM_TC_HW
-+#ifndef ATMBERT_HW
-+#define ATMBERT_HW 0
-+#endif
-+#ifndef SWTC
-+#define SWTC 1
-+#endif
-+#endif // end of #if ATM_TC_HW
-+#ifndef ATM_TC_PATH1_ON
-+#define ATM_TC_PATH1_ON 0
-+#endif
-+#ifndef BITSWAP
-+#define BITSWAP 1
-+#endif
-+#ifndef COMB_LINEDIAG_ENABLE
-+#define COMB_LINEDIAG_ENABLE 0
-+#endif
-+#ifndef CODEC_EMU
-+#define CODEC_EMU 0
-+#endif
-+#ifndef CO_PROFILE
-+#define CO_PROFILE 1
-+#endif
-+#ifndef DDC
-+#define DDC 0
-+#endif
-+#ifndef DEBUG_ADSL2
-+#define DEBUG_ADSL2 0
-+#endif
-+#ifndef DEBUG_DUMP
-+#define DEBUG_DUMP 0
-+#endif
-+#ifndef DEBUG_LOG
-+#define DEBUG_LOG 0
-+#endif
-+#ifndef DEV_DEBUG
-+#define DEV_DEBUG 0
-+#endif
-+#ifndef DS_LOOP_BACK
-+#define DS_LOOP_BACK 0
-+#endif
-+#ifndef DS_RX_CODEWORD
-+#define DS_RX_CODEWORD 1
-+#endif
-+#ifndef LOOP_BACK_DEBUG
-+#define LOOP_BACK_DEBUG 0
-+#endif
-+#ifndef US_LOOP_BACK
-+#define US_LOOP_BACK 0
-+#endif
-+#ifndef DPLL_MODE
-+#define DPLL_MODE 0
-+#endif
-+#ifndef DSPBIOSII
-+#define DSPBIOSII 0
-+#endif
-+#ifndef DMT_BIS
-+#define DMT_BIS 1
-+#endif
-+#ifndef ADSL2_1BIT_TONE
-+#define ADSL2_1BIT_TONE 0
-+#endif
-+#ifndef ADSL2_BSWP
-+#define ADSL2_BSWP 1
-+#endif
-+#ifndef MEM_STR
-+#define MEM_STR 0
-+#endif
-+#ifndef DS_PWR_CUTBACK
-+#define DS_PWR_CUTBACK 0
-+#endif
-+#ifndef DUAL_TEQ
-+#define DUAL_TEQ 1
-+#endif
-+#ifndef EXTERNBERT
-+#define EXTERNBERT 0
-+#endif
-+#ifndef FPGA
-+#define FPGA 0
-+#endif
-+#ifndef INBAND
-+#define INBAND 0
-+#endif
-+#ifndef ISDN
-+#define ISDN 0
-+#endif
-+#ifndef ISDN_DEBUG
-+#define ISDN_DEBUG 0
-+#endif
-+#ifndef LINE_DIAG
-+#define LINE_DIAG 1
-+#endif
-+#ifndef LOOP_BACK_DEBUG
-+#define LOOP_BACK_DEBUG 0
-+#endif
-+#ifndef MANUFACTURING_TESTS
-+#define MANUFACTURING_TESTS 0
-+#endif
-+#ifndef MARGIN_DELTA_RETRAIN
-+#define MARGIN_DELTA_RETRAIN 1
-+#endif
-+#ifndef MEM_STR
-+#define MEM_STR 0
-+#endif
-+#ifndef MFGR_DIAG
-+#define MFGR_DIAG 0
-+#endif
-+#ifndef NLNOISEADJSNR
-+#define NLNOISEADJSNR 0
-+#endif
-+#ifndef NLNOISEADJSNR_EC
-+#define NLNOISEADJSNR_EC 0
-+#endif
-+#ifndef NTR_MODE
-+#define NTR_MODE 0
-+#endif
-+#ifndef OAM_EOC
-+#define OAM_EOC 1
-+#endif
-+#ifndef OLAYDP
-+#define OLAYDP 0
-+#endif
-+#ifndef OLAYDP_EMIF
-+#define OLAYDP_EMIF 0
-+#endif
-+#ifndef OLAYDP_2STEP
-+#define OLAYDP_2STEP 0
-+#endif
-+#ifndef OLAYDP_PCI
-+#define OLAYDP_PCI 0
-+#endif
-+#ifndef OUTBAND
-+#define OUTBAND 0
-+#endif
-+#ifndef OVHD_PMDTEST_PARA
-+#define OVHD_PMDTEST_PARA 0
-+#endif
-+#ifndef PERTONE_EQ
-+#define PERTONE_EQ 0
-+#endif
-+#ifndef PHY_EC_ENABLE
-+#define PHY_EC_ENABLE 1
-+#endif
-+#ifndef PHY_HYB_ENABLE
-+#define PHY_HYB_ENABLE 1
-+#endif
-+#ifndef PHY_NDIAG_ENABLE
-+#define PHY_NDIAG_ENABLE 0
-+#endif
-+#ifndef PHY_PATH_ENABLE
-+#define PHY_PATH_ENABLE 1
-+#endif
-+#ifndef PHY_TDW_ENABLE
-+#define PHY_TDW_ENABLE 0
-+#endif
-+#ifndef TC_ATM_PCIMASTER
-+#define TC_ATM_PCIMASTER 0
-+#endif
-+#ifndef SEPARATE_TX_RX_BUFFERS
-+#define SEPARATE_TX_RX_BUFFERS 0
-+#endif
-+#ifndef SHALF
-+#define SHALF 0
-+#endif
-+#ifndef SPECTRAL_SHAPING
-+#define SPECTRAL_SHAPING 1
-+#endif
-+#ifndef SNR_UPDATE
-+#define SNR_UPDATE 1
-+#endif
-+#ifndef TC_DEBUG
-+#define TC_DEBUG 0
-+#endif
-+#ifndef TC_LOOPBACK
-+#define TC_LOOPBACK 0
-+#endif
-+#ifndef TESTMODE
-+#define TESTMODE 0
-+#endif
-+#ifndef TRELLIS
-+#define TRELLIS 1
-+#endif
-+#ifndef TXDF2B_PROFILING
-+#if (SERVICE_POTS & (!MFGR_DIAG) & (CO_PROFILE))
-+#define TXDF2B_PROFILING 1
-+#else
-+#define TXDF2B_PROFILING 0
-+#endif
-+#endif
-+#ifndef US_CRC_RETRAIN
-+#define US_CRC_RETRAIN 1
-+#endif
-+#ifndef US_LOOP_BACK
-+#define US_LOOP_BACK 0
-+#endif
-+#ifndef USB
-+#define USB 0
-+#endif
-+#ifndef READSL2_ENABLE
-+#define READSL2_ENABLE 1
-+#endif
-+
-+// Interop tokens
-+#ifndef GHS_NON_STD_FIELD
-+#define GHS_NON_STD_FIELD 0
-+#endif
-+#ifndef LUCENT_ANYMEDIA_ENIATT_INTEROP
-+#define LUCENT_ANYMEDIA_ENIATT_INTEROP 0
-+#endif
-+
-+
-+//
-+// END Could automatically generate showdefs code
-+//
-+#if DSPDP_FEATURE_CODE
-+#else
-+// Unrecognized_suffix____check_spelling
-+#endif
-+//
-+// LNK_CMD is set when running CPP to generate lnk_cpe.cmd file
-+// -- the linker is not happy when it sees C code show up in the
-+// result!
-+//
-+#ifndef LNK_CMD
-+extern int compile_happy; // Keep the compiler from complaining about an empty file
-+#endif
-+
-+#endif
-+
-diff -urN linux.old/drivers/atm/sangam_atm/env_def_typedefs.h linux.dev/drivers/atm/sangam_atm/env_def_typedefs.h
---- linux.old/drivers/atm/sangam_atm/env_def_typedefs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/env_def_typedefs.h 2005-08-23 04:46:50.104842632 +0200
-@@ -0,0 +1,228 @@
-+#ifndef __ENV_DEF_TYPEDEFS_H__
-+#define __ENV_DEF_TYPEDEFS_H__ 1
-+
-+/*******************************************************************************
-+* FILE PURPOSE: Define data types for C and TMS320C6x C compilers
-+********************************************************************************
-+*
-+* FILE NAME: dpsys_typedefs.h
-+*
-+* DESCRIPTION:
-+* This file contains the main typedefs that we need.
-+*
-+* HISTORY:
-+*
-+* 03/11/97 Bob Lee Created
-+* 03/13/97 Chishtie
-+* 03/14/97 Bob Lee Format change to meet "Engineering Model
-+* - System Architucture Specification"
-+* Rev AP3. Jan. 29, 1997
-+* 07/21/00 Barnett Moved many common typedefs from
-+* host i/f header file to here.
-+* 03/30/01 Barnett Mod's per driver team feedback.
-+* Some tokens cannot be def'ed
-+* if _WINDEF_ is def'ed.
-+* 04/05/01 Barnett Added DSPDP_ prefix to tokens that originate
-+* in the public interface.
-+* 06/01/01 J. Bergsagel Modified to add standard typedefs
-+* 07/25/01 J. Bergsagel Changed name from typedefs.h to dpsys_typedefs.h
-+* 07/30/01 J. Bergsagel Moved typedefs that were conflicting with Windows
-+* driver software to the "#ifndef _WINDEF_" section.
-+* 08/09/01 S. Yim Moved FALSE/TRUE definitions from ctl_interface_u.h
-+* (conflict with BIOS/std.h)
-+* 09/03/01 S. Yim Do not include typedef char and float if _STD defined
-+* (conflict with BIOS/std.h)
-+* 01/21/03 MCB Implemented Ax7 UNIT-MODULE modular software framework.
-+* 03/20/03 Mallesh Defined size of basic variables
-+* 03/27/03 F. Mujica Added SINT40 and UINT40 definitions.
-+*
-+* (C) Copyright Texas Instruments Inc. 1997-2001. All rights reserved.
-+*******************************************************************************/
-+
-+// Common type definitions
-+
-+// Basic constants needed everywhere
-+#ifndef STD_
-+#define FALSE 0
-+#define TRUE 1
-+#endif
-+
-+// Read-Write Data Types
-+typedef signed char SINT8; // Signed 8-bit integer (7-bit magnitude)
-+typedef unsigned char UINT8; // Unsigned 8-bit integer
-+typedef signed short SINT16; // Signed 16-bit integer (15-bit magnitude)
-+typedef unsigned short UINT16; // Unsigned 16-bit integer
-+typedef signed int SINT32; // Signed 32-bit integer (31-bit magnitude)
-+typedef unsigned int UINT32; // Unsigned 32-bit integer
-+typedef long signed int SINT40; // Long signed 40-bit integer
-+typedef long unsigned int UINT40; // Long unsigned 40-bit integer
-+
-+// All pointers are 32 bits long
-+typedef SINT8 *PSINT8; // Pointer to SINT8
-+typedef UINT8 *PUINT8; // Pointer to UINT8
-+typedef SINT16 *PSINT16; // Pointer to SINT16
-+typedef UINT16 *PUINT16; // Pointer to UINT16
-+typedef SINT32 *PSINT32; // Pointer to SINT32
-+typedef UINT32 *PUINT32; // Pointer to UINT32
-+
-+#define SIZEOF_SINT8 1
-+#define SIZEOF_UINT8 1
-+#define SIZEOF_SINT16 2
-+#define SIZEOF_UINT16 2
-+#define SIZEOF_SINT32 4
-+#define SIZEOF_UINT32 4
-+#define SIZEOF_SINT40 8
-+#define SIZEOF_UINT40 8
-+
-+// Size of Read-Write Data Types - in bytes
-+#define SIZEOF_char 1
-+#define SIZEOF_Int8 1
-+#define SIZEOF_UChar 1
-+#define SIZEOF_UInt8 1
-+#define SIZEOF_Float 4
-+#define SIZEOF_Double 8
-+#define SIZEOF_byte 1
-+
-+// Read-Only Data Types - should be only used for ROM code
-+typedef const char CharRom; // 8 bit signed character
-+typedef const signed char Int8Rom; // 8 bit signed integer
-+typedef const unsigned char UCharRom; // 8 bit unsigned character
-+typedef const unsigned char UInt8Rom; // 8 bit unsigned integer
-+typedef const float FloatRom; // IEEE 32-bit
-+typedef const double DoubleRom; // IEEE 64-bit
-+
-+#ifndef _WINDEF_
-+
-+// Read-Write Data Types
-+typedef signed char Int8; // 8 bit signed integer
-+typedef unsigned char UChar; // 8 bit unsigned character
-+typedef unsigned char UInt8; // 8 bit unsigned integer
-+#ifndef STD_
-+typedef char Char; // 8 bit signed character
-+typedef float Float; // IEEE 32-bit
-+#endif
-+typedef double Double; // IEEE 64-bit
-+typedef signed char byte; // 8 bit signed integer
-+
-+
-+// These typedefs collide with those in Win2k DDK inc\WINDEF.H
-+
-+// common type definition
-+typedef unsigned char BYTE; // 8-bit
-+typedef signed short SHORT; // 16-bit signed
-+typedef unsigned short WORD; // 16-bit
-+typedef unsigned int DWORD; // 32-bit, TI DSP has 40 bit longs
-+
-+// All pointers are 32 bits long
-+typedef BYTE *PBYTE; // pointer to 8 bit data
-+typedef unsigned char *PCHAR; // pointer to 8 bit data
-+typedef SHORT *PSHORT; // pointer to 16 bit data
-+typedef WORD *PWORD; // pointer to 16 bit data
-+typedef DWORD *PDWORD; // pointer to 32 bit data
-+
-+#endif // #ifndef _WINDEF_
-+
-+
-+#define SIZEOF_BYTE 1
-+#define SIZEOF_SHORT 2
-+#define SIZEOF_WORD 2
-+#define SIZEOF_DWORD 4
-+#define SIZEOF_PCHAR 4
-+#define SIZEOF_PWORD 4
-+#define SIZEOF_PDWORD 4
-+
-+// Size of Read-Only Data Types - in bytes
-+#define SIZEOF_CharRom 1
-+#define SIZEOF_Int8Rom 1
-+#define SIZEOF_UCharRom 1
-+#define SIZEOF_UInt8Rom 1
-+#define SIZEOF_FloatRom 4
-+#define SIZEOF_DoubleRom 8
-+
-+#define SIZEOF_complex_byte (2*SIZEOF_byte)
-+#define SIZEOF_PTR_complex_byte 4
-+typedef struct {
-+ byte re;
-+ byte im;
-+} complex_byte, *PTR_complex_byte;
-+
-+#define SIZEOF_complex_short 4
-+#define SIZEOF_PTR_complex_short 4
-+typedef struct {
-+ short re;
-+ short im;
-+} complex_short, *PTR_complex_short;
-+
-+#define SIZEOF_complex_int 8
-+#define SIZEOF_PTR_complex_int 4
-+typedef struct {
-+ int re;
-+ int im;
-+} complex_int, *PTR_complex_int;
-+
-+typedef struct {
-+ int high;
-+ unsigned int low;
-+} int64;
-+
-+typedef struct {
-+ int64 real;
-+ int64 imag;
-+} complex_int64;
-+
-+#define SIZEOF_PVOID 4
-+typedef void *PVOID; // pointer to void
-+
-+//* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-+
-+#if defined(_TMS320C6X) // TMS320C6xx type definitions
-+
-+// Read-Write Data Types
-+typedef short Int16; // 16 bit signed integer
-+typedef unsigned short UInt16; // 16 bit unsigned integer
-+typedef int Int32; // 32 bit signed integer
-+typedef unsigned int UInt32; // 32 bit unsigned signed integer
-+typedef long Long40; // 40 bit signed integer
-+typedef unsigned long ULong40; // 40 bit unsigned signed integer
-+
-+// Size of Read-Write Data Types - in bytes
-+#define SIZEOF_Int16 2
-+#define SIZEOF_UInt16 2
-+#define SIZEOF_Int32 4
-+#define SIZEOF_UInt32 4
-+#define SIZEOF_Long40 5
-+#define SIZEOF_ULong40 5
-+
-+// Read-Only Data Types - should be only used for ROM code
-+typedef const short Int16Rom; // 16 bit signed integer
-+typedef const unsigned short UInt16Rom; // 16 bit unsigned integer
-+typedef const int Int32Rom; // 32 bit signed integer
-+typedef const unsigned int UInt32Rom; // 32 bit unsigned signed integer
-+typedef const long Long40Rom; // 40 bit signed integer
-+typedef const unsigned long ULong40Rom; // 40 bit unsigned signed integer
-+
-+// Size of Read-Only Data Types - in bytes
-+#define SIZEOF_Int16Rom 2
-+#define SIZEOF_UInt16Rom 2
-+#define SIZEOF_Int32Rom 4
-+#define SIZEOF_UInt32Rom 4
-+#define SIZEOF_Long40Rom 5
-+#define SIZEOF_ULong40Rom 5
-+
-+#else // 32 bits PC Host type definitions
-+
-+// Read-Write Data Types
-+typedef short Int16; // 16 bit signed integer
-+typedef unsigned short UInt16; // 16 bit unsigned integer
-+typedef int Int32; // 32 bit signed integer
-+typedef unsigned int UInt32; // 32 bit unsigned integer
-+
-+// Read-Only Data Types - should be only used for ROM code
-+typedef const short Int16Rom; // 16 bit signed integer
-+typedef const unsigned short UInt16Rom; // 16 bit unsigned integer
-+typedef const int Int32Rom; // 32 bit signed integer
-+typedef const unsigned int UInt32Rom; // 32 bit unsigned integer
-+
-+#endif
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/Makefile linux.dev/drivers/atm/sangam_atm/Makefile
---- linux.old/drivers/atm/sangam_atm/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/Makefile 2005-08-23 04:46:50.104842632 +0200
-@@ -0,0 +1,35 @@
-+# File: drivers/net/avalanche_cpmac/Makefile
-+#
-+# Makefile for the Linux network (CPMAC) device drivers.
-+#
-+
-+
-+O_TARGET := tiatm.o
-+obj-$(CONFIG_MIPS_SANGAM_ATM) += tiatm.o
-+list-multi := tiatm.o
-+
-+tiatm-objs := tn7atm.o tn7dsl.o tn7sar.o dsl_hal_api.o dsl_hal_support.o cpsar.o aal5sar.o
-+
-+EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP -DCONFIG_LED_MODULE -DDEREGISTER_LED -DNO_ACT
-+
-+ifeq ($(ANNEX),B)
-+EXTRA_CFLAGS += -DANNEX_B -DB
-+else
-+ifeq ($(ANNEX),C)
-+EXTRA_CFLAGS += -DANNEX_C -DC
-+else
-+EXTRA_CFLAGS += -DANNEX_A -DP
-+endif
-+endif
-+
-+
-+include $(TOPDIR)/Rules.make
-+
-+tiatm.o: $(tiatm-objs)
-+ $(LD) -r -o $@ $(tiatm-objs)
-+
-+#avalanche_cpmac.o: $(avalanche_cpmac-objs)
-+# $(LD) -r -o $@ $(avalanche_cpmac-objs)
-+
-+clean:
-+ rm -f core *.o *.a *.s
-diff -urN linux.old/drivers/atm/sangam_atm/queue.h linux.dev/drivers/atm/sangam_atm/queue.h
---- linux.old/drivers/atm/sangam_atm/queue.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/queue.h 2005-08-23 04:46:50.104842632 +0200
-@@ -0,0 +1,167 @@
-+
-+#if !defined( __QUEUE_H__ )
-+#define __QUEUE_H__
-+
-+typedef spinlock_t OS_SPIN_LOCK;
-+#define osFreeSpinLock(pLock) while(0)
-+void osAcquireSpinLock(OS_SPIN_LOCK *pLock);
-+void osReleaseSpinLock(OS_SPIN_LOCK *pLock);
-+void osAllocateSpinLock(OS_SPIN_LOCK *pLock);
-+
-+//#define osAcquireSpinLock(pLock) spin_lock(pLock)
-+//#define osReleaseSpinLock(pLock) spin_unlock(pLock)
-+//#define osAllocateSpinLock(pLock) spin_lock_init(pLock)
-+
-+
-+typedef struct _TI_LIST_ENTRY {
-+ struct _TI_LIST_ENTRY *Flink;
-+ struct _TI_LIST_ENTRY *Blink;
-+} TI_LIST_ENTRY, *PTI_LIST_ENTRY, TQE, *PTQE;
-+
-+typedef struct _TIATM_LIST_ENTRY
-+{
-+ TI_LIST_ENTRY Link;
-+} TIATM_LIST_ENTRY, *PTIATM_LIST_ENTRY;
-+
-+//-------------------------------------------------------------------------
-+// QueueInitList -- Macro which will initialize a queue to NULL.
-+//-------------------------------------------------------------------------
-+#define QueueInitList(_L) (_L)->Link.Flink = (_L)->Link.Blink = (PTI_LIST_ENTRY)0;
-+
-+//-------------------------------------------------------------------------
-+// QueueEmpty -- Macro which checks to see if a queue is empty.
-+//-------------------------------------------------------------------------
-+#define QueueEmpty(_L) (QueueGetHead((_L)) == (PTIATM_LIST_ENTRY)0)
-+
-+//-------------------------------------------------------------------------
-+// QueueGetHead -- Macro which returns the head of the queue, but does not
-+// remove the head from the queue.
-+//-------------------------------------------------------------------------
-+#define QueueGetHead(_L) ((PTIATM_LIST_ENTRY)((_L)->Link.Flink))
-+
-+#define QueueGetNext(Elem) ((PTIATM_LIST_ENTRY)((Elem)->Link.Flink))
-+
-+//-------------------------------------------------------------------------
-+// QueuePushHead -- Macro which puts an element at the head of the queue.
-+//-------------------------------------------------------------------------
-+#define QueuePushHead(_L,_E) \
-+ if (!((_E)->Link.Flink = (_L)->Link.Flink)) \
-+ { \
-+ (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
-+ } \
-+(_L)->Link.Flink = (PTI_LIST_ENTRY)(_E);
-+
-+//-------------------------------------------------------------------------
-+// QueueRemoveHead -- Macro which removes the head of the head of queue.
-+//-------------------------------------------------------------------------
-+#define QueueRemoveHead(_L) \
-+{ \
-+ PTIATM_LIST_ENTRY ListElem; \
-+ if (ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink) \
-+ { \
-+ if(!((_L)->Link.Flink = ListElem->Link.Flink)) \
-+ (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \
-+ } \
-+}
-+
-+//-------------------------------------------------------------------------
-+// QueuePutTail -- Macro which puts an element at the tail (end) of the queue.
-+//-------------------------------------------------------------------------
-+#define QueuePutTail(_L,_E) \
-+{ \
-+ if ((_L)->Link.Blink) \
-+ { \
-+ ((PTIATM_LIST_ENTRY)(_L)->Link.Blink)->Link.Flink = (PTI_LIST_ENTRY)(_E); \
-+ (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
-+ } \
-+ else \
-+ { \
-+ (_L)->Link.Flink = \
-+ (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
-+ } \
-+ (_E)->Link.Flink = (PTI_LIST_ENTRY)0; \
-+}
-+
-+//-------------------------------------------------------------------------
-+// QueuePutTailWithLock -- Macro which puts an element at the tail (end) of
-+// the queue, using spin lock.
-+//-------------------------------------------------------------------------
-+#define QueuePutTailWithLock(_L,_E, pLock) \
-+{ \
-+ osAcquireSpinLock(pLock); \
-+ if ((_L)->Link.Blink) \
-+ { \
-+ ((PTIATM_LIST_ENTRY)(_L)->Link.Blink)->Link.Flink = (PTI_LIST_ENTRY)(_E); \
-+ (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
-+ } \
-+ else \
-+ { \
-+ (_L)->Link.Flink = \
-+ (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \
-+ } \
-+ (_E)->Link.Flink = (PTI_LIST_ENTRY)0; \
-+ osReleaseSpinLock(pLock); \
-+}
-+
-+//-------------------------------------------------------------------------
-+// QueueGetTail -- Macro which returns the tail of the queue, but does not
-+// remove the tail from the queue.
-+//-------------------------------------------------------------------------
-+#define QueueGetTail(_L) ((PTIATM_LIST_ENTRY)((_L)->Link.Blink))
-+
-+//-------------------------------------------------------------------------
-+// QueuePopHead -- Macro which will pop the head off of a queue (list), and
-+// return it (this differs only from queueremovehead only in
-+// the 1st line)
-+//-------------------------------------------------------------------------
-+#define QueuePopHead(_L) \
-+(PTIATM_LIST_ENTRY) (_L)->Link.Flink; QueueRemoveHead(_L);
-+
-+#define QueueRemoveTail(_L) \
-+{ \
-+ PTIATM_LIST_ENTRY ListElem; \
-+ ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink; \
-+ if(ListElem == (PTIATM_LIST_ENTRY)(_L)->Link.Blink) \
-+ { \
-+ (_L)->Link.Flink = (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \
-+ } \
-+ else \
-+ { \
-+ while(ListElem->Link.Flink != (PTI_LIST_ENTRY)(_L)->Link.Blink) \
-+ { \
-+ ListElem = (PTIATM_LIST_ENTRY)ListElem->Link.Flink; \
-+ } \
-+ (_L)->Link.Blink = (PTI_LIST_ENTRY) ListElem; \
-+ ListElem->Link.Flink = (PTI_LIST_ENTRY)0; \
-+ } \
-+}
-+
-+#define QueueRemoveItem(_L, Elem) \
-+{ \
-+ PTIATM_LIST_ENTRY ListElem; \
-+ ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink; \
-+ if(ListElem == Elem) \
-+ { \
-+ QueueRemoveHead(_L); \
-+ } \
-+ else \
-+ { \
-+ while(ListElem) \
-+ { \
-+ if(Elem == (PTIATM_LIST_ENTRY)ListElem->Link.Flink) \
-+ { \
-+ ListElem->Link.Flink = ((PTIATM_LIST_ENTRY)Elem)->Link.Flink; \
-+ if(Elem == (PTIATM_LIST_ENTRY)(_L)->Link.Blink) \
-+ (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \
-+ break; \
-+ } \
-+ ListElem = (PTIATM_LIST_ENTRY)ListElem->Link.Flink; \
-+ }\
-+ } \
-+ ((PTIATM_LIST_ENTRY)Elem)->Link.Flink = (PTI_LIST_ENTRY) 0; \
-+}
-+
-+#define QueuePopTail(_L) \
-+((PTIATM_LIST_ENTRY)((_L)->Link.Blink)); QueueRemoveTail(_L);
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/release.txt linux.dev/drivers/atm/sangam_atm/release.txt
---- linux.old/drivers/atm/sangam_atm/release.txt 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/release.txt 2005-08-23 04:46:50.104842632 +0200
-@@ -0,0 +1,118 @@
-+This is release notes for AR7 Linux ATM driver.
-+
-+version 04.02.04.00
-+-------------------
-+
-+1. Corrected the conditional logic from logical AND to logical OR in the case
-+ of check for DSL line down condition. This is to fix PPPoA crashing
-+ problem when DSL line is unplugged.
-+
-+version 04.02.03.00
-+-------------------
-+1. Changed overlay page to static allocation.
-+2. Added flag to stop TX during channel closing.
-+3. Changed DMA memory allocation back to "GFP_ATOMIC" flag.
-+
-+version 04.02.02.00
-+-------------------
-+1. Changed DMA memory allocation from "GFP_ATOMIC" to "GFP_KERNEL" flag.
-+2. Added "DoMask" setting for VBR channel setup.
-+
-+version 04.02.01.01
-+-------------------
-+1. Modified priority check scheme per SPTC request.
-+
-+Version 04.02.01.00
-+-------------------
-+1. Add check to skb->priority to place packets to either normal or priority queue.
-+2. Add spin lock to increment and decrement of queued buffer number.
-+
-+Version 04.02.00.00
-+-------------------
-+Features:
-+1. Add MBS and CDVT QoS support for ATM driver.
-+2. Add "stop/start queue" for ToS application.
-+3. Add Showtime margin retrain based on EOC message.
-+4. Add EOC vendor ID customalization logic for Annex B.
-+5. Supports D3 datapump.
-+
-+Version 04.01.00.00
-+-------------------
-+Re-release of 04.00.07.00 for D1.1 datapump.
-+
-+Version 04.00.07.00
-+-------------------
-+Features:
-+1. Add marging retrain capability by setting following Adam2 Env.
-+ setenv enable_margin_retrain 1
-+ setenv margin_threshold xx, xx is in half db, i.e., 10 means 5db.
-+
-+Bugfixs:
-+1. New PDSP firmware that fix the F5 OAM cell loopback probelm in Cisco DSLAM.
-+
-+Version 04.00.06.00
-+-------------------
-+1. ATM interrupt pacing is defauted to 2 interrupts/s.
-+2. Rx Service MAX changed ftom 16 to 8.
-+
-+Version 04.00.05.00
-+-------------------
-+Features:
-+1. Add Adam2 env to disable the TurboDSL by entering "setenv TurboDSL 0".
-+2. Add ability to set interrupt pacing for ATM driver.
-+
-+Bugfixs:
-+1. Fixed the RFC2684 and CLIP problems for Cisco router.
-+2. Fixed LED blinking problem when DSL cable is unplugged.
-+3. Fixed problem that "selected mode" is not updated.
-+
-+Version 04.00.04.00
-+-------------------
-+Features:
-+1. Added feature so OAM F5 ping will not require a corresponding PVC channel to
-+ be setup.
-+2. Added timeout value for F5 OAM ping. The new command are "exxxpyyycdzzzt" for
-+ end-to-end and "sxxxpyyycdzzzt" for segment. "zzz" is timeout value in milli-second.
-+3. Added proc entry "avsar_pvc_table" to record received VPIs and VCIs. The format is
-+ vpi,vci
-+ seperated by new line. To search for PVCs, an application can do the following.
-+ i) Send a (or several) F5 OAM cell on a VPI/VPI pairs with command
-+ echo exxxpyyycd2t > /proc/sys/dev/dslmod
-+ ii) Wait >2ms or poll proc entry /proc/avalanche/avsar_oam_ping until the result
-+ indicates a failure. (It will be failed all the time with 2ms timeout.)
-+ iii) Repeat above two steps for new VPI/VCI pairs.
-+ iv) Check proc entry /proc/avalanche/avsar_pvc_table any time for PVCs that responded.
-+
-+Version 04.00.03.00
-+-------------------
-+Bug Fixs:
-+1. Fixed bug that caused crash when phone cable is unplugged.
-+2. Fixed LED operation for "flexible LEDs".
-+
-+Features:
-+1. Added the proc entry "avsar_oam_ping" to signal oam ping result.
-+ 0 - failed; 1 - success; 2 - in progress.
-+2. Added oam ping timeout env variable. The timeout can be specified by
-+ adding Adam2 env "oam_lb_timeout". The value is in millisecond.
-+
-+Version 04.00.02.00
-+-------------------
-+1. The driver uses hardware queue for Turbo DSL.
-+2. Added new modem statistics listed below:
-+ US and DS TX powers, atuc Vendor ID and revision, training mode selected,
-+ Hybrid Selected, and etc.
-+
-+Version 04.00.01.00
-+-------------------
-+
-+1. This driver release contains all the features that exists in AR5 Linux ATM
-+ 3.1 driver.
-+
-+2. F4 OAM generation is added.
-+
-+3. Software queuing is used for TURBO DSL.
-+
-+4. Porting guide "is created. Please look into that document for detailed
-+ information.
-+
-+
-diff -urN linux.old/drivers/atm/sangam_atm/syssw_version.h linux.dev/drivers/atm/sangam_atm/syssw_version.h
---- linux.old/drivers/atm/sangam_atm/syssw_version.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/syssw_version.h 2005-08-23 04:46:50.105842480 +0200
-@@ -0,0 +1,94 @@
-+#ifndef __SYSSW_VERSION_H__
-+#define __SYSSW_VERSION_H__ 1
-+
-+/*******************************************************************************
-+* FILE PURPOSE: DSL Driver API functions for Sangam
-+*
-+********************************************************************************
-+* FILE NAME: dsl_hal_basicapi.c
-+*
-+* DESCRIPTION:
-+* Contains basic DSL HAL APIs for Sangam
-+*
-+* (C) Copyright 2003-04, Texas Instruments, Inc.
-+* History
-+* Date Version Notes
-+* 14May03 0.00.00 RamP Original Version Created
-+* 14May03 0.00.01 RamP Initial Rev numbers inserted
-+* 14May03 0.00.02 RamP Bumped version numbers for Dsl Hal
-+* & dhalapp for alpha plus
-+* 19May03 0.00.03 MCB Bumped dslhal version number
-+* because of dependant changes
-+* wrt. linux-nsp atm drivers.
-+* 22May03 0.00.04 RamP Bumped dslhal & dhalapp buildnum
-+* for inner/outer pair & DGASP code
-+* 06Jun03 0.00.05 RamP Bumped up buildnum for LED, STM,
-+* interrupt processing, statistics
-+* and other pre-beta features
-+* 09Jun03 0.00.06 JEB Fixed error in DHALAPP bugfix/buildnum
-+* 09Jun03 0.00.07 RamP Bumped up buildnum for incremental
-+* changes to apis, statistics, memory
-+* fixes, parameter configurations
-+* 11Jun03 0.00.08 RamP Bumped up buildnum for Co profile
-+* free memory fix
-+* 12Jun03 0.00.09 JEB Bumped version numbers for AR7 1.00 Beta
-+* 02Jul03 0.00.10 ZT Bumped HAL version for overlay page
-+* 18Jul03 0.00.11 RamP Bumped HAL version for analog diags
-+* 22Jul03 0.00.12 JEB Bumped DHALAPP buildnum for analog diags
-+* 31Jul03 0.00.13 RamP Bumped HAL version for engr. drop
-+* 04Aug03 0.00.14 JEB Bumped HAL version buildnum for CHECKPOINT65 changes
-+* Bumped LINUX version buildnum for CHECKPOINT65 changes
-+* 06Aug03 0.00.15 MCB Bumped all version numbers in prep for AR7 1.0 R2 release for POTS.
-+* 13Aug03 0.00.16 MCB Set rev id's for D3/R1.1 (ADSL2).
-+* 21Aug03 0.00.17 JEB Bumped up build numbers for merge of code additions from D1
-+* 26Sep03 0.00.18 JEB Set rev id's for another D3/R1 (ADSL2).
-+* 14Oct03 0.00.19 JEB Bumped Linux minor number and reset bugfix number for release.
-+* Bumped build numbers on DSLHAL and DHALAPP for this checkpoint.
-+* 14Oct03 0.00.20 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT15.
-+* 21Oct03 0.00.21 JEB Bumped build number on DSLHAL for CHECKPOINT16.
-+* 22Oct03 0.00.22 MCB Bumped all version numbers in support of D3R1 release.
-+* 27Oct03 0.00.23 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT19.
-+* Updated version for DSLAGENT to be 02.01.00.01 for ACT 2.1 R0.
-+* 30Oct03 0.00.24 JEB Bumped bugfix number on LINUXATM Version for next release.
-+* Bumped build numbers on DSLHAL and DHALAPP
-+* 31Oct03 0.00.25 MCB Bumped all version numbers in support of D3R2 release.
-+* 14Nov03 0.00.26 JEB Bumped build numbers on DSLHAL and DHALAPP
-+* Changed version for DSLAGENT to be 02.00.01.01 for an ACT 2.0 R0
-+* 20Nov03 0.00.27 JEB Bumped build number on DSLHAL.
-+* Changed version for DSLAGENT to be 02.00.02.00 for the next ACT 2.0 R2
-+* 21Nov03 0.00.28 MCB Bumped all version numbers in support of D3R2 release.
-+* 21Nov03 0.00.29 JEB Bumped build numbers on DSLHAL and DHALAPP for D3-R0 drop on 11/21.
-+* 16Dec03 0.00.30 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT31.
-+* 21Dec03 0.00.31 MCB Bumped all version numbers in support of D3R2 release.
-+* 05Jan04 0.00.32 JEB Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 34.
-+* 15Jan04 0.00.33 JEB Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 36.
-+* 26Jan04 0.00.34 JEB Changed Linux ATM version number to be 04.02.03.00.
-+* 27Jan04 0.00.35 MCB Bumped all version numbers in support of D3R2 release.
-+*******************************************************************************/
-+
-+/* Dsl Hal API Version Numbers */
-+#define DSLHAL_VERSION_MAJOR 03
-+#define DSLHAL_VERSION_MINOR 00
-+#define DSLHAL_VERSION_BUGFIX 06
-+#define DSLHAL_VERSION_BUILDNUM 00
-+#define DSLHAL_VERSION_TIMESTAMP 00
-+
-+/* dhalapp Adam2 Application Version Numbers */
-+#define DHALAPP_VERSION_MAJOR 03
-+#define DHALAPP_VERSION_MINOR 00
-+#define DHALAPP_VERSION_BUGFIX 05
-+#define DHALAPP_VERSION_BUILDNUM 00
-+
-+/* Linux ATM Driver Version Numbers */
-+#define LINUXATM_VERSION_MAJOR 04
-+#define LINUXATM_VERSION_MINOR 02
-+#define LINUXATM_VERSION_BUGFIX 04
-+#define LINUXATM_VERSION_BUILDNUM 00
-+
-+/* DSL Agent Version Numbers */
-+#define DSLAGENT_VERSION_MAJOR 02
-+#define DSLAGENT_VERSION_MINOR 00
-+#define DSLAGENT_VERSION_BUGFIX 02
-+#define DSLAGENT_VERSION_BUILDNUM 00
-+
-+#endif /* pairs with #ifndef __SYSSW_VERSION_H__ */
-diff -urN linux.old/drivers/atm/sangam_atm/tn7api.h linux.dev/drivers/atm/sangam_atm/tn7api.h
---- linux.old/drivers/atm/sangam_atm/tn7api.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/tn7api.h 2005-08-23 04:46:50.105842480 +0200
-@@ -0,0 +1,54 @@
-+/*
-+ * Tnetd73xx ATM driver.
-+ * by Zhicheng Tang, ztang@ti.com
-+ * 2000 (c) Texas Instruments Inc.
-+ *
-+ *
-+*/
-+
-+#ifndef __SAPI_H
-+#define __SAPI_H
-+
-+/* tn7atm.c */
-+void xdump(unsigned char *buff, int len, int debugLev);
-+int tn7atm_receive(void *os_dev, int ch, unsigned int packet_size, void *os_receive_info, void *data);
-+void *tn7atm_allocate_rx_skb(void *os_dev, void **os_receive_info, unsigned int size);
-+void tn7atm_free_rx_skb(void *skb);
-+void tn7atm_sarhal_isr_register(void *os_dev, void *hal_isr, int interrupt_num);
-+int tn7atm_send_complete(void *osSendInfo);
-+int tn7atm_device_connect_status(void *priv, int state);
-+int tn7atm_lut_find(short vpi, int vci);
-+
-+/* tn7dsl.h */
-+void tn7dsl_exit(void);
-+int tn7dsl_init(void *priv);
-+int tn7dsl_proc_stats(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+int tn7dsl_proc_modem(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+int tn7dsl_handle_interrupt(void);
-+void dprintf( int uDbgLevel, char * szFmt, ...);
-+void tn7dsl_dslmod_sysctl_register(void);
-+void tn7dsl_dslmod_sysctl_unregister(void);
-+int tn7dsl_get_dslhal_version(char *pVer);
-+int tn7dsl_get_dsp_version(char *pVer);
-+
-+int os_atoi(const char *pStr);
-+int os_atoh(const char *pStr);
-+unsigned long os_atoul(const char *pStr);
-+
-+/* tn7sar.c */
-+int tn7sar_activate_vc(Tn7AtmPrivate *priv, short vpi, int vci, int pcr, int scr, int mbs, int cdvt, int chan, int qos);
-+int tn7sar_init(struct atm_dev *dev, Tn7AtmPrivate *priv);
-+int tn7sar_register_interrupt_handle(void *os_dev, void *hal_isr, int *interrupt_num);
-+void tn7sar_exit(struct atm_dev *dev, Tn7AtmPrivate *priv);
-+int tn7sar_deactivate_vc(Tn7AtmPrivate *priv, int chan);
-+int tn7sar_handle_interrupt(struct atm_dev *dev, Tn7AtmPrivate *priv);
-+int tn7sar_send_packet(Tn7AtmPrivate *priv, int chan, void *new_skb, void *data,unsigned int len, int priority);
-+void tn7sar_get_sar_version(Tn7AtmPrivate *priv, char **pVer);
-+int tn7sar_get_near_end_loopback_count(unsigned int *pF4count, unsigned int *pF5count);
-+int tn7sar_oam_generation(void *privContext, int chan, int type, int vpi, int vci, int timeout);
-+int tn7sar_get_stats(void *priv1);
-+int tn7sar_proc_sar_stat(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+void tn7sar_get_sar_firmware_version(unsigned int *pdsp_version_ms, unsigned int *pdsp_version_ls);
-+int tn7sar_proc_oam_ping(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+int tn7sar_proc_pvc_table(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/tn7atm.c linux.dev/drivers/atm/sangam_atm/tn7atm.c
---- linux.old/drivers/atm/sangam_atm/tn7atm.c 2005-08-28 01:52:26.000000000 -0600
-+++ linux.dev/drivers/atm/sangam_atm/tn7atm.c 2005-08-28 02:08:07.000000000 -0600
-@@ -0,0 +1,1233 @@
-+/*
-+ * tn7.c
-+ * Linux atm module implementation.
-+ * Zhicheng Tang 01/08/2003
-+ * 2003 (c) Texas Instruments Inc.
-+ *
-+ *
-+*/
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/atmdev.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/smp_lock.h>
-+#include <asm/io.h>
-+#include <asm/mips-boards/prom.h>
-+#include <linux/proc_fs.h>
-+#include <linux/string.h>
-+#include <linux/ctype.h>
-+#include "tn7atm.h"
-+#include "tn7api.h"
-+#include "syssw_version.h"
-+
-+#ifdef CONFIG_LED_MODULE
-+#include <asm/ar7/ledapp.h>
-+#endif
-+#include <asm/ar7/avalanche_intc.h>
-+
-+#ifdef MODULE
-+MODULE_DESCRIPTION ("Tnetd73xx ATM Device Driver");
-+MODULE_AUTHOR ("Zhicheng Tang");
-+#endif
-+
-+/* Version Information */
-+//static char atm_version[] ="1.0.0.1";
-+
-+#define TRUE 1
-+#define FALSE 0
-+
-+#define STOP_EMPTY_BUFF 2
-+#define START_EMPTY_BUFF 3
-+/* externs */
-+
-+/*end of externs */
-+
-+#define tn7atm_kfree_skb(x) dev_kfree_skb(x)
-+
-+/* prototypes */
-+int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci);
-+
-+void tn7atm_close (struct atm_vcc *vcc);
-+
-+static int tn7atm_ioctl (struct atm_dev *dev, unsigned int cmd, void *arg);
-+
-+int tn7atm_send (struct atm_vcc *vcc, struct sk_buff *skb);
-+
-+static int tn7atm_change_qos (struct atm_vcc *vcc, struct atm_qos *qos,int flags);
-+
-+static int tn7atm_detect(void);
-+static int tn7atm_init(struct atm_dev* dev);
-+//static int tn7atm_reset(void);
-+static int tn7atm_irq_request(struct atm_dev* dev);
-+static int tn7atm_proc_version(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+static void tn7atm_exit(void);
-+static int tn7atm_proc_channels(char* buf, char **start, off_t offset, int count,int *eof, void *data);
-+static int tn7atm_proc_private(char* buf, char **start, off_t offset, int count,int *eof,void *data);
-+//static void tn7atm_free_packet(void *vcc1, void *priv, void *skb1);
-+static int tn7atm_queue_packet_to_sar(void *vcc1, void *skb1);
-+
-+#include "turbodsl.c"
-+
-+/* ATM device operations */
-+
-+struct atm_dev *mydev;
-+
-+static const struct atmdev_ops tn7atm_ops = {
-+ open: tn7atm_open,
-+ close: tn7atm_close,
-+ ioctl: tn7atm_ioctl,
-+ getsockopt: NULL,
-+ setsockopt: NULL,
-+ send: tn7atm_send,
-+ sg_send: NULL,
-+ phy_put: NULL,
-+ phy_get: NULL,
-+ change_qos: tn7atm_change_qos,
-+};
-+
-+
-+int __guDbgLevel = 1;
-+
-+
-+void xdump(unsigned char *buff, int len, int debugLev)
-+{
-+#ifdef DEBUG_BUILD
-+ int i, j;
-+ if( __guDbgLevel < debugLev)
-+ return;
-+
-+ j=0;
-+ for(i=0;i<len;i++)
-+ {
-+ printk("%02x ", buff[i]);
-+ j++;
-+ if(j==8)
-+ {
-+ j=0;
-+ printk("\n");
-+ }
-+ }
-+ printk("\n");
-+#endif
-+}
-+
-+
-+#if 0 /* by nbd */
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_walk_vccs(struct atm_dev *dev, short *vcc, int *vci)
-+ *
-+ * Description: retrieve VPI/VCI for connection
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+static int
-+tn7atm_walk_vccs(struct atm_vcc *vcc, short *vpi, int *vci)
-+{
-+ struct atm_vcc* walk;
-+
-+ // printk(tn7 "tn7atm_walk_vccs\n");
-+ /* find a free VPI */
-+ if (*vpi == ATM_VPI_ANY) {
-+
-+ for (*vpi = 0, walk = vcc->dev->vccs; walk; walk = walk->next) {
-+
-+ if ((walk->vci == *vci) && (walk->vpi == *vpi)) {
-+ (*vpi)++;
-+ walk = vcc->dev->vccs;
-+ }
-+ }
-+ }
-+
-+ /* find a free VCI */
-+ if (*vci == ATM_VCI_ANY) {
-+
-+ for (*vci = ATM_NOT_RSV_VCI, walk = vcc->dev->vccs; walk; walk = walk->next) {
-+
-+ if ((walk->vpi = *vpi) && (walk->vci == *vci)) {
-+ *vci = walk->vci + 1;
-+ walk = vcc->dev->vccs;
-+ }
-+ }
-+ }
-+
-+ return 0;
-+}
-+#endif
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_sar_irq(void)
-+ *
-+ * Description: tnetd73xx SAR interrupt.
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+static void
-+tn7atm_sar_irq(int irq , void *voiddev , struct pt_regs *regs)
-+{
-+ struct atm_dev *atmdev;
-+ Tn7AtmPrivate *priv;
-+
-+ dprintf(6, "tn7atm_sar_irq\n");
-+ atmdev = (struct atm_dev *) voiddev;
-+ priv = (Tn7AtmPrivate *)atmdev->dev_data;
-+
-+ tn7sar_handle_interrupt(atmdev, priv);
-+
-+ dprintf(6, "Leaving tn7atm_sar_irq\n");
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_dsl_irq(void)
-+ *
-+ * Description: tnetd73xx DSL interrupt.
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+static void
-+tn7atm_dsl_irq(int irq , void *voiddev , struct pt_regs *regs)
-+{
-+ struct atm_dev *atmdev;
-+ Tn7AtmPrivate *priv;
-+
-+ dprintf(4, "tn7atm_dsl_irq\n");
-+ atmdev = (struct atm_dev *) voiddev;
-+ priv = (Tn7AtmPrivate *)atmdev->dev_data;
-+
-+ tn7dsl_handle_interrupt();
-+
-+ dprintf(4, "Leaving tn7atm_dsl_irq\n");
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_Inittxcomp(struct tn7* tn7)
-+ *
-+ * Description: Initialize Interrupt handler
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-+static int __init
-+tn7atm_irq_request (struct atm_dev *dev)
-+{
-+ Tn7AtmPrivate *priv;
-+ char *ptr;
-+ int ipace=2;
-+
-+ dprintf(4, "tn7atm_irq_request()\n");
-+ priv = (Tn7AtmPrivate *) dev->dev_data;
-+
-+ /* Register SAR interrupt */
-+ priv->sar_irq = LNXINTNUM(ATM_SAR_INT); /* Interrupt line # */
-+ if (request_irq(priv->sar_irq, tn7atm_sar_irq, SA_INTERRUPT, "SAR ", dev))
-+ printk ("Could not register tn7atm_sar_irq\n");
-+
-+ /* interrupt pacing */
-+ ptr= prom_getenv("sar_ipacemax");
-+ if(ptr)
-+ {
-+ ipace=os_atoi(ptr);
-+ }
-+ avalanche_request_pacing(priv->sar_irq, ATM_SAR_INT_PACING_BLOCK_NUM, ipace);
-+
-+ /* Reigster Receive interrupt A */
-+ priv->dsl_irq = LNXINTNUM(ATM_DSL_INT); /* Interrupt line # */
-+ if (request_irq(priv->dsl_irq, tn7atm_dsl_irq, SA_INTERRUPT, "DSL ", dev))
-+ printk ("Could not register tn7atm_dsl_irq\n");
-+
-+ return 0;
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_lut_find(struct atm_vcc *vcc)
-+ *
-+ * Description: find an TX DMA channel
-+ * that matches a vpi/vci pair
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-+int
-+tn7atm_lut_find(short vpi, int vci)
-+{
-+ int i;
-+ Tn7AtmPrivate *priv;
-+
-+ priv = (Tn7AtmPrivate *)mydev->dev_data;
-+
-+ if(vci==0) // find first vpi channel
-+ {
-+ for(i=0; i< MAX_DMA_CHAN; i++)
-+ {
-+ if((priv->lut[i].vpi == vpi))
-+ return i;
-+ }
-+ }
-+
-+ dprintf(4, "vpi=%d, vci=%d\n", vpi, vci);
-+ for(i=0; i< MAX_DMA_CHAN; i++)
-+ {
-+ if((priv->lut[i].vpi == vpi) && (priv->lut[i].vci == vci))
-+ return i;
-+ }
-+
-+
-+
-+ return ATM_NO_DMA_CHAN;
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_lut_clear(struct atm_vcc *vcc,int chan)
-+ *
-+ * Description: find an TX DMA channel
-+ * that matches a vpi/vci pair
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-+static int
-+tn7atm_lut_clear(struct atm_vcc *vcc, int chan)
-+{
-+ Tn7AtmPrivate *priv;
-+
-+ priv = (Tn7AtmPrivate *)vcc->dev->dev_data;
-+
-+ memset(&priv->lut[chan], 0, sizeof(priv->lut[chan]));
-+
-+ return 0;
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_walk_lut(void)
-+ *
-+ * Description: find an available TX DMA channel
-+ * and initialize LUT
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-+static int
-+tn7atm_walk_lut(Tn7AtmPrivate *priv)
-+{
-+ int i;
-+
-+ for(i=0; i< MAX_DMA_CHAN; i++){
-+ if(!priv->lut[i].inuse)
-+ {
-+ return i; /* return available dma channel number */
-+ }
-+ }
-+ return ATM_NO_DMA_CHAN; /* no tx dma channels available */
-+}
-+
-+static int
-+tn7atm_set_lut(Tn7AtmPrivate *priv, struct atm_vcc *vcc, int chan)
-+{
-+
-+ if(!priv->lut[chan].inuse)
-+ {
-+ priv->lut[chan].vpi = (int)vcc->vpi;
-+ priv->lut[chan].vci = vcc->vci;
-+ priv->lut[chan].chanid = chan;
-+ priv->lut[chan].inuse = 1; /* claim the channel */
-+ priv->lut[chan].vcc = (void *)vcc;
-+ priv->lut[chan].bClosing = 0;
-+ priv->lut[chan].ready = 0;
-+ priv->lut[chan].tx_total_bufs = TX_BUFFER_NUM;
-+ priv->lut[chan].tx_used_bufs[0] = 0;
-+ priv->lut[chan].tx_used_bufs[1] = 0;
-+ return 0;
-+ }
-+ return -1; /* no tx dma channels available */
-+}
-+
-+#if 0
-+static void tn7atm_free_packet(void *pVc, void *pDev, void *pPacket)
-+ {
-+ Tn7AtmPrivate *priv;
-+ struct atm_vcc *vcc;
-+ struct sk_buff *skb;
-+
-+ vcc = (struct atm_vcc *)pVc;
-+ priv = (Tn7AtmPrivate *)pDev;
-+ skb = (struct sk_buff *) pPacket;
-+
-+ if(vcc->pop)
-+ vcc->pop(vcc, skb);
-+ else
-+ tn7atm_kfree_skb(skb);
-+ }
-+#endif
-+
-+static void str2eaddr(char *pMac, char *pStr)
-+{
-+ char tmp[3];
-+ int i;
-+
-+ for(i=0;i<6;i++)
-+ {
-+ tmp[0]=pStr[i*3];
-+ tmp[1]=pStr[i*3+1];
-+ tmp[2]=0;
-+ pMac[i]=os_atoh(tmp);
-+ }
-+}
-+
-+static int __init
-+tn7atm_get_ESI(struct atm_dev *dev)
-+{
-+ int i;
-+ char esi_addr[ESI_LEN]={0x00,0x00,0x11,0x22,0x33,0x44};
-+ char *esiaddr_str = NULL;
-+
-+ esiaddr_str = prom_getenv("macc");
-+
-+ if (!esiaddr_str) {
-+ //printk("macc address not set in adam2 environment space\n");
-+ //printk("Using default macc address = 00:01:02:03:04:05\n");
-+ esiaddr_str = "00:00:02:03:04:05";
-+ }
-+ str2eaddr(esi_addr, esiaddr_str);
-+
-+ for(i=0; i < ESI_LEN; i++)
-+ dev->esi[i] = esi_addr[i];
-+
-+ return 0;
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_open(struct atm_vcc *vcc, short vpi, int vci)
-+ *
-+ * Description: Device operation: open
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
-+//static int
-+int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci)
-+{
-+ Tn7AtmPrivate *priv;
-+ int dmachan;
-+ int rc;
-+ int traffic_type;
-+ int pcr = 0x20000;
-+ int scr = 0x20000;
-+ int mbs = 0x20000;
-+ int cdvt = 10000;
-+ int err;
-+
-+ dprintf(1, "tn7atm_open()\n");
-+
-+ priv = (Tn7AtmPrivate *)vcc->dev->dev_data;
-+ if(priv==NULL)
-+ {
-+ printk("null priv\n");
-+ return -1;
-+ }
-+
-+ MOD_INC_USE_COUNT;
-+
-+#if 0 /* by nbd */
-+ /* find a free VPI/VCI */
-+ tn7atm_walk_vccs(vcc, &vpi, &vci);
-+#else
-+ if ((err = atm_find_ci(vcc, &vpi, &vci))) {
-+ printk("atm_find_ci err = %d\n", err);
-+ return err;
-+ }
-+
-+#endif
-+
-+ vcc->vpi = vpi;
-+ vcc->vci = vci;
-+
-+ if (vci == ATM_VCI_UNSPEC || vpi == ATM_VCI_UNSPEC)
-+ {
-+ MOD_DEC_USE_COUNT;
-+ return -EBUSY;
-+ }
-+
-+ /* check to see whether PVC is opened or not */
-+ if((dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci)) != ATM_NO_DMA_CHAN)
-+ {
-+ MOD_DEC_USE_COUNT;
-+ printk("PVC already opened. dmachan = %d\n", dmachan);
-+ return -EBUSY;
-+ }
-+ /*check for available channel */
-+ if((dmachan = tn7atm_walk_lut(priv)) == ATM_NO_DMA_CHAN)
-+ {
-+ printk("No TX DMA channels available\n");
-+ return -EBUSY;
-+ }
-+
-+ set_bit(ATM_VF_ADDR, &vcc->flags); /* claim address */
-+
-+ vcc->itf = vcc->dev->number; /* interface number */
-+
-+ switch(vcc->qos.txtp.traffic_class)
-+ {
-+ case ATM_CBR: /* Constant Bit Rate */
-+ traffic_type = 0;
-+ pcr = vcc->qos.txtp.pcr;
-+ scr = vcc->qos.txtp.pcr;
-+ cdvt = vcc->qos.txtp.max_cdv;
-+ printk("cdvt=%d\n", cdvt);
-+ break;
-+ case ATM_UBR: /* Unspecified Bit Rate */
-+ traffic_type = 2;
-+ break;
-+
-+ /* Disable ATM_VBR until pppd ppoatm plugin supports it.
-+ * NOTE: Support ATM_VBR requires the addition of a scr
-+ * field to the atm_trafprm structure which will cause
-+ * a change in the SO_ATMQOS ioctl. Make sure that the
-+ * revised header file becomes visible to the pppd
-+ * pppoatm plugin source, or the SO_ATMQOS ioctl will fail.
-+ */
-+#if 0
-+ case ATM_VBR: /* Variable Bit Rate */
-+ traffic_type = 1;
-+ pcr = vcc->qos.txtp.pcr;
-+ scr = vcc->qos.txtp.scr;
-+ if(vcc->qos.txtp.max_pcr >= 0)
-+ mbs = vcc->qos.txtp.max_pcr;
-+ cdvt = vcc->qos.txtp.max_cdv;
-+ printk("cdvt=%d\n", cdvt);
-+ printk("mbs=%d\n", mbs);
-+ break;
-+#endif
-+ default:
-+ traffic_type = 2;
-+ }
-+
-+ dprintf(4, "vpi=%d, vci=%d, pcr=%d, dmachan=%d, qos=%d\n", vpi,vci,pcr,dmachan,traffic_type);
-+ /* Activate SAR channel */
-+ rc = tn7sar_activate_vc(priv, vpi, vci, pcr, scr, mbs, cdvt, dmachan, traffic_type);
-+ if(rc < 0)
-+ {
-+
-+ MOD_DEC_USE_COUNT;
-+ return -EBUSY;
-+ }
-+
-+ /* insure that the the vcc struct points to the correct entry
-+ in the lookup table */
-+
-+ tn7atm_set_lut(priv,vcc, dmachan);
-+ vcc->dev_data = (void *)&priv->lut[dmachan];
-+ set_bit(ATM_VF_READY, &vcc->flags);
-+
-+ mdelay(100);
-+ priv->lut[dmachan].ready = 1;
-+ dprintf (1, "Leave tn7atm_open\n");
-+ return 0;
-+}
-+
-+
-+//static void
-+void tn7atm_close (struct atm_vcc *vcc)
-+{
-+ Tn7AtmPrivate *priv;
-+ int dmachan;
-+
-+ priv = (Tn7AtmPrivate *)vcc->dev->dev_data;
-+ dprintf(4, "closing %d.%d.%d.%d\n", vcc->itf, vcc->vpi, vcc->vci, vcc->qos.aal);
-+
-+ clear_bit(ATM_VF_READY, &vcc->flags); /* ATM_VF_READY: channel is ready to transfer data */
-+
-+ dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci);
-+ printk("closing channel: %d\n", dmachan);
-+ if(dmachan == ATM_NO_DMA_CHAN)
-+ {
-+ printk("Closing channel not found.\n");
-+ return;
-+ }
-+ priv->lut[dmachan].bClosing = 1;
-+ priv->lut[dmachan].ready = 0;
-+ if(tn7sar_deactivate_vc(priv,dmachan)) /* tear down channel */
-+ {
-+ printk("failed to close channel %d.\n", dmachan);
-+ }
-+
-+ clear_bit(ATM_VF_READY, &vcc->flags); /* ATM_VF_READY: channel is ready to transfer data */
-+ tn7atm_lut_clear(vcc, dmachan);
-+
-+ MOD_DEC_USE_COUNT;
-+
-+ dprintf (1, "Leave tn7atm_close\n");
-+}
-+
-+#define ATM_TXSTOP 0x800c61f4
-+static int
-+tn7atm_ioctl (struct atm_dev *dev, unsigned int cmd, void *arg)
-+{
-+ Tn7AtmPrivate *priv;
-+ priv = (Tn7AtmPrivate *) dev->dev_data;
-+
-+ //printk("tn7atm_ioctl\n");
-+ //printk("arg = %x\n", *(int *)arg);
-+ //printk("cmd =%x\n", cmd);
-+ switch(cmd)
-+ {
-+
-+ case ATM_TXSTOP: /*temp fix for SAR tear down problem */
-+// printk("ioctl cmd = 0x%x (%u), arg = 0x%p (%lu)\n", cmd, cmd, arg, (unsigned long)arg);
-+// printk("arg = %d\n", *(int*)arg);
-+ priv->xmitStop = *(int *)arg;
-+ //printk("Executing ATM_SETLOOP for tn7 \n");
-+ //printk("Stop variable = :%d: \n",priv->xmitStop);
-+ return 0;
-+
-+ //case SAR_DSL_RESET_SOFTBOOT:
-+ // return tn7atm_dsl_clean_reboot();
-+ case 0:
-+ return 0;
-+ }
-+
-+ return -ENOSYS;
-+
-+}
-+
-+static int
-+tn7atm_change_qos (struct atm_vcc *vcc, struct atm_qos *qos,int flags)
-+{
-+ dprintf (1, "Enter tn7atm_change_qos\n");
-+ dprintf (1, "Leave tn7atm_change_qos\n");
-+ return 0;
-+}
-+
-+
-+int tn7atm_send (struct atm_vcc *vcc, struct sk_buff *skb)
-+{
-+
-+ Tn7AtmPrivate *priv;
-+ int bret;
-+ int chan;
-+
-+ dprintf(4, "tn7atm_send()\n");
-+
-+ priv = (Tn7AtmPrivate*)vcc->dev->dev_data;
-+
-+ //if(skb->len < 64)
-+ //xdump((unsigned char *)skb->data, skb->len, 1);
-+ //else
-+ //xdump((unsigned char *)skb->data, 64, 1);
-+ /* check for dsl line connection */
-+
-+ /* add vcc field in skb for clip inATMARP fix */
-+ ATM_SKB(skb)->vcc = vcc;
-+ /* Ron change 2.3 -> 2.4 ??*/
-+ //if(priv->lConnected != 1 || priv->xmitStop == 1)
-+ if(priv->lConnected != 1 && priv->xmitStop == 1)
-+ {
-+ dprintf(4,"dsl line down\n");
-+ if(vcc->pop)
-+ vcc->pop(vcc, skb);
-+ else
-+ tn7atm_kfree_skb(skb);
-+ return 1;
-+ }
-+
-+ /* check whether PVC is closing */
-+ chan = tn7atm_lut_find(vcc->vpi, vcc->vci);
-+ /* set br2684 dev pointer */
-+ priv->lut[chan].net_device = skb->dev;
-+ if(chan == ATM_NO_DMA_CHAN || priv->lut[chan].bClosing == 1)
-+ {
-+ dprintf(4, "can find sar channel\n");
-+ if(vcc->pop)
-+ vcc->pop(vcc, skb);
-+ else
-+ tn7atm_kfree_skb(skb);
-+ return 1;
-+ }
-+
-+ bret=tn7atm_queue_packet_to_sar(vcc, skb);
-+
-+ return bret;
-+}
-+
-+
-+static int tn7atm_queue_packet_to_sar(void *vcc1, void *skb1)
-+{
-+ struct atm_vcc *vcc;
-+ struct sk_buff *skb;
-+ int priority = 1;
-+ Tn7AtmPrivate *priv;
-+ int dmachan;
-+
-+ vcc = (struct atm_vcc *)vcc1;
-+ skb = (struct sk_buff *)skb1;
-+
-+ priv = (Tn7AtmPrivate*)vcc->dev->dev_data;
-+
-+ dprintf(4, "vcc->vci=%d\n", vcc->vci);
-+ dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci);
-+ if(dmachan == ATM_NO_DMA_CHAN)
-+ {
-+ dprintf(4, "can find sar channel\n");
-+ if(vcc->pop)
-+ vcc->pop(vcc, skb);
-+ else
-+ tn7atm_kfree_skb(skb);
-+ return 1;
-+ }
-+
-+ // turbo dsl TCP ack check
-+ if(priv->bTurboDsl)
-+ priority = turbodsl_check_priority_type(skb->data);
-+
-+ //skb priority check
-+ if(priority != 0)
-+ {
-+ if((skb->cb[47])>>1)
-+ priority=1;
-+ else
-+ priority = 0;
-+ }
-+
-+ /* add queue info here */
-+ skb->cb[47] = (char)priority;
-+ spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+ priv->lut[dmachan].tx_used_bufs[priority]++;
-+ spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+
-+ if(tn7sar_send_packet(priv,dmachan, skb, skb->data, skb->len, priority) != 0)
-+ {
-+ dprintf(1, "failed to send packet\n");
-+ if(vcc->pop)
-+ vcc->pop(vcc, skb);
-+ else
-+ tn7atm_kfree_skb(skb);
-+
-+ spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+ priv->lut[dmachan].tx_used_bufs[priority]--;
-+ spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+ return 1;
-+ }
-+
-+ /* check for whether tx queue is full or not */
-+ //printk("bufs used = %d\n", priv->lut[dmachan].tx_used_bufs[1]);
-+ spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+ if(priv->lut[dmachan].tx_used_bufs[1] >= (priv->lut[dmachan].tx_total_bufs - STOP_EMPTY_BUFF) ||
-+ priv->lut[dmachan].tx_used_bufs[0] >= (priv->lut[dmachan].tx_total_bufs - STOP_EMPTY_BUFF))
-+ {
-+ //printk("net queue stoped\n");
-+ netif_stop_queue(priv->lut[dmachan].net_device);
-+ priv->lut[dmachan].netqueue_stop = 1;
-+ }
-+ spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+
-+ return 0;
-+}
-+
-+/* functions needed by SAR HAL */
-+
-+int tn7atm_send_complete(void *osSendInfo)
-+{
-+ Tn7AtmPrivate *priv;
-+ //struct atm_dev *dev;
-+ struct sk_buff *skb;
-+ struct atm_vcc *vcc;
-+ int chan;
-+
-+ dprintf(4, "tn7atm_send_complete()\n");
-+
-+
-+ skb = (struct sk_buff *)osSendInfo;
-+ //dev = (struct atm_dev *) (skb->dev);
-+ priv = (Tn7AtmPrivate *)mydev->dev_data;
-+ vcc =ATM_SKB(skb)->vcc;
-+ if(vcc)
-+ {
-+ dprintf(4, "vcc->vci=%d\n",vcc->vci );
-+ chan = tn7atm_lut_find(vcc->vpi, vcc->vci);
-+ if(chan==ATM_NO_DMA_CHAN)
-+ return 1;
-+
-+ /*decreament packet queued number */
-+ spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+ priv->lut[chan].tx_used_bufs[(int)skb->cb[47]] --;
-+ if(priv->lut[chan].tx_used_bufs[1] < priv->lut[chan].tx_total_bufs - START_EMPTY_BUFF &&
-+ priv->lut[chan].tx_used_bufs[0] < priv->lut[chan].tx_total_bufs - START_EMPTY_BUFF)
-+ {
-+ if(priv->lut[chan].netqueue_stop)
-+ {
-+ //printk("net queue restarted\n");
-+ netif_wake_queue(priv->lut[chan].net_device);
-+ priv->lut[chan].netqueue_stop = 0;
-+ }
-+ }
-+ spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag);
-+
-+ if(vcc->pop)
-+ {
-+ dprintf(5, "free packet\n");
-+ vcc->pop(vcc, skb);
-+ }
-+
-+
-+ }
-+
-+
-+
-+ /* Update Stats: There may be a better place to do this, but this is a start */
-+ priv->stats.tx_packets++;
-+#ifdef CONFIG_LED_MODULE
-+// led_operation(MOD_ADSL, DEF_ADSL_ACTIVITY);
-+#endif
-+
-+ /* track number of buffer used */
-+
-+ dprintf(4, "tn7atm_send_complete() done\n");
-+
-+ return 0;
-+}
-+
-+void *tn7atm_allocate_rx_skb(void *os_dev, void **os_receive_info, unsigned int size)
-+{
-+ struct sk_buff *skb;
-+ dprintf(4, "tn7atm_allocate_rx_skb size=%d\n", size);
-+ size = ((size+3)&0xfffffffc);
-+ skb = dev_alloc_skb(size);
-+ if(skb==NULL)
-+ {
-+ //printk("rx allocate skb failed\n");
-+ return NULL;
-+ }
-+ *os_receive_info = (void *)skb;
-+ return (skb->data);
-+}
-+
-+void tn7atm_free_rx_skb(void *skb)
-+{
-+ dprintf(4, "tn7atm_free_rx_skb\n");
-+ tn7atm_kfree_skb((struct sk_buff *)skb);
-+}
-+
-+
-+int tn7atm_receive(void *os_dev, int ch, unsigned int packet_size, void *os_receive_info, void *data)
-+{
-+ Tn7AtmPrivate *priv;
-+ struct atm_dev *dev;
-+ struct sk_buff *skb;
-+ struct atm_vcc *vcc;
-+
-+
-+ dprintf(4, "tn7atm_receive()\n");
-+ dev = (struct atm_dev *)os_dev;
-+
-+ priv = (Tn7AtmPrivate *)dev->dev_data;
-+
-+ if(priv->lConnected != 1 || priv->lut[ch].ready == 0)
-+ {
-+ //printk("channel not ready\n");
-+ return 1;
-+ }
-+
-+ vcc = (struct atm_vcc *)priv->lut[ch].vcc;
-+ if(vcc == NULL)
-+ {
-+ printk("vcc=Null");
-+ return 1;
-+ }
-+
-+
-+ /* assume no fragment packet for now */
-+ skb = (struct sk_buff *)os_receive_info;
-+
-+ if(skb==NULL)
-+ {
-+ dprintf(1, "received empty skb.\n");
-+ return 1;
-+ }
-+ /* see skbuff->cb definition in include/linux/skbuff.h */
-+ ATM_SKB(skb)->vcc = vcc;
-+
-+ skb->len = packet_size;
-+ dprintf(3, "skb:[0x%p]:0x%x pdu_len: 0x%04x\n",skb,skb->len,packet_size);
-+ dprintf(3, "data location: 0x%x, 0x%x\n", (unsigned int)skb->data, (unsigned int)data);
-+
-+ /*skb_trim(skb,skb->len); */ /* skb size is incorrect for large packets > 1428 bytes ?? */
-+ __skb_trim(skb,skb->len); /* change to correct > 1500 ping when firewall is on */
-+
-+ dprintf(3, "pushing the skb...\n");
-+ skb->stamp = xtime;
-+
-+ xdump((unsigned char *)skb->data, skb->len, 5);
-+
-+ if(atm_charge(vcc, skb->truesize) == 0)
-+ {
-+ dprintf(1,"Receive buffers saturated for %d.%d.%d - PDU dropped\n", vcc->itf, vcc->vci, vcc->vpi);
-+ return 1;
-+ }
-+
-+ /*pass it up to kernel networking layer and update stats*/
-+ vcc->push(vcc,skb);
-+
-+ /* Update receive packet stats */
-+ priv->stats.rx_packets++;
-+ atomic_inc(&vcc->stats->rx);
-+
-+#ifdef CONFIG_LED_MODULE
-+// led_operation(MOD_ADSL, DEF_ADSL_ACTIVITY);
-+#endif
-+ dprintf(3, "(a) Receiving:vpi/vci[%d/%d] chan_id: %d skb len:0x%x skb truesize:0x%x\n",
-+ vcc->vpi,vcc->vci,ch,skb->len, skb->truesize);
-+
-+ return 0;
-+}
-+
-+static int
-+tn7atm_proc_channels(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+ int len = 0;
-+ int limit = count - 80;
-+ int i;
-+
-+ struct atm_dev *dev;
-+ Tn7AtmPrivate *priv;
-+
-+ dev = (struct atm_dev *)data;
-+ priv = (Tn7AtmPrivate *)dev->dev_data;
-+
-+ if(len<=limit)
-+ len += sprintf(buf+len,"Chan Inuse ChanID VPI VCI \n");
-+ if(len<=limit)
-+ len += sprintf(buf+len,"------------------------------------------------------------------\n");
-+
-+ for(i=0; i < MAX_DMA_CHAN; i++)
-+ {
-+ if(len<=limit)
-+ {
-+ len += sprintf(buf+len,
-+ " %02d %05d %05d %05d %05d \n",
-+ i,priv->lut[i].inuse,priv->lut[i].chanid,
-+ priv->lut[i].vpi,priv->lut[i].vci);
-+ }
-+ }
-+
-+ return len;
-+}
-+
-+static int
-+tn7atm_proc_private(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+ int len = 0;
-+ int limit = count - 80;
-+ struct atm_dev *dev;
-+ Tn7AtmPrivate *priv;
-+
-+ dev = (struct atm_dev *)data;
-+ priv = (Tn7AtmPrivate *)dev->dev_data;
-+
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\nPrivate Data Structure(%s):\n",priv->name);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "----------------------------------------\n");
-+ if(len<=limit)
-+ len += sprintf(buf+len, "priv: 0x%p\n",priv);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "next: 0x%p",priv->next);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tdev: 0x%p\n",priv->dev);
-+
-+ if(len<=limit)
-+ len += sprintf(buf+len, "tx_irq: %02d",priv->sar_irq);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "rx_irq: %02d",priv->dsl_irq);
-+
-+
-+ return len;
-+}
-+
-+void tn7atm_sarhal_isr_register(void *os_dev, void *hal_isr, int interrupt_num)
-+{
-+ struct atm_dev *dev;
-+ Tn7AtmPrivate *priv;
-+
-+ dprintf(4, "tn7atm_sarhal_isr_register()\n");
-+
-+ dev = (struct atm_dev *)os_dev;
-+ priv = (Tn7AtmPrivate *)dev->dev_data;
-+ priv->halIsr = (void *)hal_isr;
-+ priv->int_num = interrupt_num;
-+}
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_exit(void)
-+ *
-+ * Description: Avalanche SAR exit function
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+
-+static void
-+tn7atm_exit (void)
-+{
-+
-+ struct atm_dev *dev;
-+
-+ Tn7AtmPrivate *priv;
-+
-+ dprintf(4, "tn7atm_exit()\n");
-+
-+ dev=mydev;
-+ priv = (Tn7AtmPrivate *)dev->dev_data;
-+ priv->lConnected = 0;
-+ tn7dsl_exit();
-+
-+ tn7sar_exit(dev, priv);
-+
-+ /* freeup irq's */
-+ free_irq(priv->dsl_irq,priv->dev);
-+ free_irq(priv->sar_irq,priv->dev);
-+
-+ kfree (dev->dev_data);
-+
-+ // atm_dev_deregister (dev);
-+ shutdown_atm_dev(dev);
-+
-+ /* remove proc entries */
-+ remove_proc_entry("tiatm/avsar_ver",NULL);
-+ remove_proc_entry("tiatm/avsar_modem_stats",NULL);
-+ remove_proc_entry("tiatm/avsar_modem_training",NULL);
-+ remove_proc_entry("tiatm/avsar_channels",NULL);
-+ remove_proc_entry("tiatm/avsar_private",NULL);
-+ remove_proc_entry("tiatm/avsar_sarhal_stats",NULL);
-+ remove_proc_entry("tiatm/avsar_oam_ping",NULL);
-+ remove_proc_entry("tiatm/avsar_pvc_table",NULL);
-+ remove_proc_entry("tiatm",NULL);
-+ tn7dsl_dslmod_sysctl_unregister();
-+
-+ printk ("Module Removed\n");
-+
-+}
-+
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_registration(struct tn7* tn7)
-+ *
-+ * Description: ATM driver registration
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+
-+static int __init
-+tn7atm_register (Tn7AtmPrivate * priv)
-+{
-+ /* allocate memory for the device */
-+
-+ dprintf(4,"device %s being registered\n", priv->name);
-+
-+ mydev = atm_dev_register (priv->proc_name, &tn7atm_ops, -1, NULL);
-+
-+ if (mydev == NULL)
-+ {
-+ printk ("atm_dev_register returning NULL\n");
-+ return ATM_REG_FAILED;
-+ }
-+
-+ printk ("registered device %s\n", priv->name);
-+
-+ mydev->dev_data = priv; /* setup device data in atm_dev struct */
-+ priv->dev = mydev; /* setup atm_device in avalanche sar struct */
-+
-+ mydev->ci_range.vpi_bits = ATM_CI_MAX; /* atm supports 11 bits */
-+ mydev->ci_range.vci_bits = 16; /* atm VCI max = 16 bits */
-+
-+
-+ return ATM_REG_OK;
-+}
-+
-+static int
-+tn7atm_proc_version(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+ int len = 0;
-+ char dslVer[8];
-+ char dspVer[10];
-+ char *pSarVer;
-+ Tn7AtmPrivate *priv;
-+ int i;
-+ unsigned int pdspV1, pdspV2;
-+
-+ priv = mydev->dev_data;
-+
-+ len += sprintf(buf+len, "ATM Driver version:[%d.%02d.%02d.%02d]\n",LINUXATM_VERSION_MAJOR, LINUXATM_VERSION_MINOR,
-+ LINUXATM_VERSION_BUGFIX, LINUXATM_VERSION_BUILDNUM);
-+
-+ tn7dsl_get_dslhal_version(dslVer);
-+
-+ len += sprintf(buf+len, "DSL HAL version: [%d.%02d.%02d.%02d]\n", dslVer[0], dslVer[1], dslVer[2],
-+ dslVer[3]);
-+ tn7dsl_get_dsp_version(dspVer);
-+
-+ len += sprintf(buf+len, "DSP Datapump version: [%d.%02d.%02d.%02d] ", dspVer[4], dspVer[5], dspVer[6],
-+ dspVer[7]);
-+ if(dspVer[8]==2) // annex B
-+ len += sprintf(buf+len, "Annex B\n");
-+ else if(dspVer[8]==3) //annex c
-+ len += sprintf(buf+len, "Annex c\n");
-+ else
-+ len += sprintf(buf+len, "Annex A\n");
-+
-+ tn7sar_get_sar_version(priv, &pSarVer);
-+
-+ len += sprintf(buf+len, "SAR HAL version: [");
-+ for(i=0;i<8;i++)
-+ {
-+ len += sprintf(buf+len, "%c", pSarVer[i+7]);
-+ }
-+ len += sprintf(buf+len, "]\n");
-+
-+ tn7sar_get_sar_firmware_version(&pdspV1, &pdspV2);
-+ len += sprintf(buf+len, "PDSP Firmware version:[%01x.%02x]\n",
-+ pdspV1,pdspV2);
-+
-+ return len;
-+}
-+
-+/*
-+static struct net_device_stats
-+*tn7atm_get_stats(struct atm_dev *dev)
-+{
-+ Tn7AtmPrivate *priv;
-+ //unsigned long flags;
-+
-+ //spin_lock_irqsave(&priv->stats_lock,flags);
-+ priv= (Tn7AtmPrivate *)dev->dev_data;
-+ //spin_unlock_irqrestore(&priv->stats_lock,flags);
-+
-+ return &priv->stats;
-+
-+}
-+*/
-+/* Device detection */
-+
-+static int __init
-+tn7atm_detect (void)
-+{
-+ Tn7AtmPrivate *priv;
-+ //static struct proc_dir_entry *proc_dir;
-+
-+ dprintf(4, "tn7atm_detect().\n");
-+ /* Device allocated as a global static structure at top of code "mydev" */
-+
-+ /* Alloc priv struct */
-+ priv=kmalloc(sizeof(Tn7AtmPrivate),GFP_KERNEL);
-+ if(!priv)
-+ {
-+ printk("unable to kmalloc priv structure. Killing autoprobe.\n");
-+ return -ENODEV;
-+ }
-+ memset(priv, 0, sizeof(Tn7AtmPrivate));
-+#ifdef COMMON_NSP
-+ priv->name = "TI Avalanche SAR";
-+ priv->proc_name = "avsar";
-+#else
-+ priv->name = "TI tnetd73xx ATM Driver";
-+ priv->proc_name = "tn7";
-+#endif
-+
-+ if ((tn7atm_register (priv)) == ATM_REG_FAILED)
-+ return -ENODEV;
-+
-+ tn7atm_init(mydev);
-+
-+ /* Set up proc entry for atm stats */
-+ proc_mkdir("tiatm", NULL);
-+ create_proc_read_entry("tiatm/avsar_modem_stats",0,NULL,tn7dsl_proc_stats,NULL);
-+ create_proc_read_entry("tiatm/avsar_modem_training",0,NULL,tn7dsl_proc_modem,NULL);
-+ create_proc_read_entry("tiatm/avsar_ver",0,NULL,tn7atm_proc_version,NULL);
-+ create_proc_read_entry("tiatm/avsar_channels",0,NULL,tn7atm_proc_channels,mydev);
-+ create_proc_read_entry("tiatm/avsar_private",0,NULL,tn7atm_proc_private,mydev);
-+ create_proc_read_entry("tiatm/avsar_sarhal_stats",0,NULL,tn7sar_proc_sar_stat,mydev);
-+ create_proc_read_entry("tiatm/avsar_oam_ping",0,NULL,tn7sar_proc_oam_ping,mydev);
-+ create_proc_read_entry("tiatm/avsar_pvc_table",0,NULL,tn7sar_proc_pvc_table,mydev);
-+
-+ tn7dsl_dslmod_sysctl_register();
-+
-+ printk("Texas Instruments ATM driver: version:[%d.%02d.%02d.%02d]\n",LINUXATM_VERSION_MAJOR, LINUXATM_VERSION_MINOR,
-+ LINUXATM_VERSION_BUGFIX, LINUXATM_VERSION_BUILDNUM);
-+ return 0;
-+}
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_probe(void)
-+ *
-+ * Description: Avalanche SAR driver probe (see net/atm/pvc.c)
-+ * this is utilized when the SAR driver is built
-+ * into the kernel and needs to be configured.
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+int __init tn7atm_probe(void)
-+{
-+ tn7atm_detect();
-+ return -ENODEV;
-+}
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int tn7atm_init(struct atm_dev *dev)
-+ *
-+ * Description: Device Initialization
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+static int __init
-+tn7atm_init(struct atm_dev *dev)
-+{
-+ Tn7AtmPrivate *priv;
-+ char *ptr;
-+
-+ dprintf(4, "tn7atm_init()\n");
-+
-+ priv = (Tn7AtmPrivate *)dev->dev_data;
-+
-+ if(tn7sar_init(dev, priv) != 0)
-+ {
-+ printk("Failed to init SAR.\n");
-+ return -ENODEV;
-+ }
-+
-+ if(tn7dsl_init(priv) < 0)
-+ {
-+ printk("Failed to init DSL.\n");
-+ return -ENODEV;
-+ }
-+
-+ if(tn7atm_get_ESI(dev) < 0) /* set ESI */
-+ return -ENODEV;
-+
-+ if(tn7atm_irq_request(dev) < 0)
-+ return -EBUSY;
-+
-+ priv->bTurboDsl = 1;
-+ // read config for turbo dsl
-+ ptr = prom_getenv("TurboDSL");
-+ if(ptr)
-+ {
-+ priv->bTurboDsl = os_atoi(ptr);
-+ }
-+
-+ return 0;
-+}
-+
-+int tn7atm_device_connect_status(void *priv, int state)
-+{
-+ Tn7AtmPrivate *priv1;
-+
-+ dprintf(5, "tn7atm_device_connect_status()\n");
-+ priv1 = (Tn7AtmPrivate *)priv;
-+
-+ priv1->lConnected = state;
-+ dprintf(5, "priv1->lConnected=%d\n", priv1->lConnected);
-+ return 0;
-+}
-+
-+
-+#ifdef MODULE
-+module_init (tn7atm_detect);
-+module_exit (tn7atm_exit);
-+#endif /* MODULE */
-diff -urN linux.old/drivers/atm/sangam_atm/tn7atm.h linux.dev/drivers/atm/sangam_atm/tn7atm.h
---- linux.old/drivers/atm/sangam_atm/tn7atm.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/tn7atm.h 2005-08-23 04:46:50.107842176 +0200
-@@ -0,0 +1,115 @@
-+/*
-+ * Tnetd73xx ATM driver.
-+ * by Zhicheng Tang, ztang@ti.com
-+ * 2000 (c) Texas Instruments Inc.
-+ *
-+ *
-+*/
-+
-+#ifndef __TN7ATM_H
-+#define __TN7ATM_H
-+
-+//#include "mips_support.h"
-+#include <linux/list.h>
-+
-+#define ATM_REG_OK 1
-+#define ATM_REG_FAILED 0
-+
-+#define TX_SERVICE_MAX 32
-+#define RX_SERVICE_MAX 20
-+#define TX_BUFFER_NUM 64
-+#define RX_BUFFER_NUM 28
-+#define TX_QUEUE_NUM 2
-+#define RX_BUFFER_SIZE 1582
-+
-+#define TX_DMA_CHAN 16 /* number of tx dma channels available */
-+#define MAX_DMA_CHAN 16
-+#define ATM_NO_DMA_CHAN MAX_DMA_CHAN + 1 /* no tx dma channels available */
-+#define ATM_SAR_INT 15
-+#define ATM_SAR_INT_PACING_BLOCK_NUM 2
-+#define ATM_DSL_INT 39
-+
-+#define CONFIG_ATM_TN7ATM_DEBUG 0 /* Debug level (0=no mtn7s 5=verbose) */
-+
-+#define TN7ATM_DEV(d) ((struct tn7atm*)((d)->dev_data))
-+
-+
-+/* Avalanche SAR state information */
-+
-+typedef enum tn7atm_state
-+{
-+ TN7ATM_STATE_REGISTER /* device registered */
-+}tn7atm_state;
-+
-+typedef struct _sar_stat
-+{
-+ unsigned int txErrors;
-+ unsigned int rxErrors;
-+ unsigned int rxPktCnt;
-+ unsigned int txPktCnt;
-+ unsigned int rxBytes;
-+ unsigned int txBytes;
-+}sar_stat_t;
-+
-+/* Host based look up table to xref Channel Id's, VPI/VCI, LC, CID, packet type */
-+typedef struct _tn7atm_tx_lut
-+{
-+ int inuse; /* is DMA channel available (1=y) */
-+ int chanid; /* DMA channel ID (0-0x1f) This corresponds to the Channel ID
-+ that is used in the connection config reg (TN7ATM_CONN_CONFIG) */
-+ int vpi; /* Virtual path identifier */
-+ int vci; /* Virtual channel identifier */
-+ void *vcc;
-+ int bClosing;
-+ int ready;
-+ void *net_device;
-+ int tx_total_bufs;
-+ int tx_used_bufs[2];
-+ int netqueue_stop;
-+}tn7atm_lut_t;
-+
-+/* per device data */
-+
-+typedef struct _tn7atm_private
-+{
-+ struct _tn7atm_private *next; /* next device */
-+ struct atm_dev *dev; /* ATM device */
-+ struct net_device_stats stats; /* Used to report Tx/Rx frames from ifconfig */
-+ tn7atm_lut_t lut[MAX_DMA_CHAN]; /* Tx DMA look up table (LUT) */
-+ int dsl_irq; /* ATM SAR TransmitA interrupt number */
-+ int sar_irq; /* ATM SAR ReceiveA interrupt number */
-+ char* name; /* device name */
-+ char* proc_name; /* board name under /proc/atm */
-+ unsigned int available_cell_rate; /* cell rate */
-+ unsigned int connection_cell_rate; /* cell rate */
-+ int lConnected;
-+
-+ /* Tnetd73xx CPHAL */
-+ void *pSarHalDev;
-+ void *pSarHalFunc;
-+ void *pSarOsFunc;
-+ void *halIsr;
-+ int int_num;
-+
-+ /* turbo dsl */
-+ int bTurboDsl;
-+
-+ /* spin lock for netifqueue */
-+ spinlock_t netifqueueLock;
-+ int netifqueueLockFlag;
-+ int xmitStop; /* temp fix for SAR problem */
-+}tn7atm_private_t, Tn7AtmPrivate;
-+
-+
-+
-+/* ATM adaptation layer id */
-+typedef enum tn7atm_aal {
-+ TN7ATM_AAL0 = 0,
-+ TN7ATM_AAL2 = 2,
-+ TN7ATM_AAL5 = 5,
-+} tn7atm_aal_t;
-+
-+
-+
-+
-+#endif
-diff -urN linux.old/drivers/atm/sangam_atm/tn7dsl.c linux.dev/drivers/atm/sangam_atm/tn7dsl.c
---- linux.old/drivers/atm/sangam_atm/tn7dsl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/tn7dsl.c 2005-08-23 04:46:50.109841872 +0200
-@@ -0,0 +1,1780 @@
-+/*
-+ * $Id$
-+ *
-+ * Avalanche SAR driver
-+ *
-+ * Zhicheng Tang, ztang@ti.com
-+ * 2000 (c) Texas Instruments Inc.
-+ *
-+ *
-+*/
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/atmdev.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/smp_lock.h>
-+#include <asm/io.h>
-+#include <asm/mips-boards/prom.h>
-+#include <linux/proc_fs.h>
-+#include <linux/string.h>
-+#include <linux/ctype.h>
-+#include <linux/sysctl.h>
-+#include <linux/timer.h>
-+#include <linux/vmalloc.h>
-+#include <linux/file.h>
-+#include <asm/uaccess.h>
-+
-+#include "tn7atm.h"
-+#include "tn7api.h"
-+#include "dsl_hal_api.h"
-+
-+#ifdef CONFIG_LED_MODULE
-+#include <asm/ar7/ledapp.h>
-+#define MOD_ADSL 1
-+#define DEF_ADSL_IDLE 1
-+#define DEF_ADSL_TRAINING 2
-+#define DEF_ADSL_SYNC 3
-+#define DEF_ADSL_ACTIVITY 4
-+
-+#define LED_NUM_1 3
-+#define LED_NUM_2 4
-+
-+led_reg_t ledreg[2];
-+
-+static int led_on;
-+#endif
-+
-+extern int __guDbgLevel;
-+extern sar_stat_t sarStat;
-+static int dslInSync = 0;
-+static int bMarginThConfig;
-+static int bMarginRetrainEnable;
-+static char EOCVendorID[8]= {0xb5, 0x00, 0x54, 0x53, 0x54, 0x43, 0x00, 0x00};
-+
-+#define TC_SYNC 1
-+#define SYNC_TIME_DELAY 500000
-+
-+
-+#define DEV_DSLMOD 1
-+#define MAX_STR_SIZE 256
-+#define DSL_MOD_SIZE 256
-+
-+#define TRUE 1
-+#define FALSE 0
-+
-+
-+enum
-+{
-+ NO_MODE,
-+ MULTI_MODE,
-+ T1413_MODE,
-+ GDMT_MODE,
-+ GLITE_MODE
-+};
-+
-+
-+
-+/* a structure to store all information we need
-+ for our thread */
-+typedef struct kthread_struct
-+{
-+ /* private data */
-+
-+ /* Linux task structure of thread */
-+ struct task_struct *thread;
-+ /* Task queue need to launch thread */
-+ struct tq_struct tq;
-+ /* function to be started as thread */
-+ void (*function) (struct kthread_struct *kthread);
-+ /* semaphore needed on start and creation of thread. */
-+ struct semaphore startstop_sem;
-+
-+ /* public data */
-+
-+ /* queue thread is waiting on. Gets initialized by
-+ init_kthread, can be used by thread itself.
-+ */
-+ wait_queue_head_t queue;
-+ /* flag to tell thread whether to die or not.
-+ When the thread receives a signal, it must check
-+ the value of terminate and call exit_kthread and terminate
-+ if set.
-+ */
-+ int terminate;
-+ /* additional data to pass to kernel thread */
-+ void *arg;
-+} kthread_t;
-+
-+#ifndef ADIAG
-+#define DSP_FIRMWARE_PATH "/lib/modules/ar0700xx.bin"
-+#else
-+#define DSP_FIRMWARE_PATH "/var/tmp/ar0700xx_diag.bin"
-+#endif
-+
-+/* externs */
-+extern struct atm_dev *mydev;
-+extern unsigned int oamFarLBCount[4];
-+extern int dslhal_support_restoreTrainingInfo(PITIDSLHW_T pIhw);
-+/* gloabal functions */
-+
-+/* end of global functions */
-+
-+/* module wide declars */
-+static PITIDSLHW_T pIhw;
-+static char mod_req[16]={'\t'};
-+static volatile int bshutdown;
-+static char info[MAX_STR_SIZE];
-+static DECLARE_MUTEX_LOCKED(adsl_sem_overlay); /* Used for DSL Polling enable */
-+kthread_t overlay_thread;
-+/* end of module wide declars */
-+
-+/* Internal Functions */
-+static void tn7dsl_chng_modulation(void* data);
-+static void tn7dsl_set_modulation(void* data);
-+static int tn7dsl_reload_overlay(void);
-+static int dslmod_sysctl(ctl_table *ctl, int write, struct file * filp, void *buffer, size_t *lenp);
-+static void tn7dsl_register_dslss_led(void);
-+void tn7dsl_dslmod_sysctl_register(void);
-+void tn7dsl_dslmod_sysctl_unregister(void);
-+/* end of internal functions */
-+
-+
-+
-+
-+
-+/* prototypes */
-+
-+/* start new kthread (called by creator) */
-+void start_kthread(void (*func)(kthread_t *), kthread_t *kthread);
-+
-+/* stop a running thread (called by "killer") */
-+void stop_kthread(kthread_t *kthread);
-+
-+/* setup thread environment (called by new thread) */
-+void init_kthread(kthread_t *kthread, char *name);
-+
-+/* cleanup thread environment (called by thread upon receiving termination signal) */
-+void exit_kthread(kthread_t *kthread);
-+
-+
-+
-+/* private functions */
-+static void kthread_launcher(void *data)
-+{
-+ kthread_t *kthread = data;
-+ kernel_thread((int (*)(void *))kthread->function, (void *)kthread, 0);
-+
-+}
-+
-+/* public functions */
-+
-+/* create a new kernel thread. Called by the creator. */
-+void start_kthread(void (*func)(kthread_t *), kthread_t *kthread)
-+{
-+ /* initialize the semaphore:
-+ we start with the semaphore locked. The new kernel
-+ thread will setup its stuff and unlock it. This
-+ control flow (the one that creates the thread) blocks
-+ in the down operation below until the thread has reached
-+ the up() operation.
-+ */
-+ //init_MUTEX_LOCKED(&kthread->startstop_sem);
-+
-+ /* store the function to be executed in the data passed to
-+ the launcher */
-+ kthread->function=func;
-+
-+ /* create the new thread my running a task through keventd */
-+
-+ /* initialize the task queue structure */
-+ kthread->tq.sync = 0;
-+ INIT_LIST_HEAD(&kthread->tq.list);
-+ kthread->tq.routine = kthread_launcher;
-+ kthread->tq.data = kthread;
-+
-+ /* and schedule it for execution */
-+ schedule_task(&kthread->tq);
-+
-+ /* wait till it has reached the setup_thread routine */
-+ //down(&kthread->startstop_sem);
-+
-+}
-+
-+/* stop a kernel thread. Called by the removing instance */
-+void stop_kthread(kthread_t *kthread)
-+{
-+ if (kthread->thread == NULL)
-+ {
-+ printk("stop_kthread: killing non existing thread!\n");
-+ return;
-+ }
-+
-+ /* this function needs to be protected with the big
-+ kernel lock (lock_kernel()). The lock must be
-+ grabbed before changing the terminate
-+ flag and released after the down() call. */
-+ lock_kernel();
-+
-+ /* initialize the semaphore. We lock it here, the
-+ leave_thread call of the thread to be terminated
-+ will unlock it. As soon as we see the semaphore
-+ unlocked, we know that the thread has exited.
-+ */
-+ //init_MUTEX_LOCKED(&kthread->startstop_sem);
-+
-+ /* We need to do a memory barrier here to be sure that
-+ the flags are visible on all CPUs.
-+ */
-+ mb();
-+
-+ /* set flag to request thread termination */
-+ kthread->terminate = 1;
-+
-+ /* We need to do a memory barrier here to be sure that
-+ the flags are visible on all CPUs.
-+ */
-+ mb();
-+ kill_proc(kthread->thread->pid, SIGKILL, 1);
-+
-+ /* block till thread terminated */
-+ //down(&kthread->startstop_sem);
-+
-+ /* release the big kernel lock */
-+ unlock_kernel();
-+
-+ /* now we are sure the thread is in zombie state. We
-+ notify keventd to clean the process up.
-+ */
-+ kill_proc(2, SIGCHLD, 1);
-+
-+}
-+
-+/* initialize new created thread. Called by the new thread. */
-+void init_kthread(kthread_t *kthread, char *name)
-+{
-+ /* lock the kernel. A new kernel thread starts without
-+ the big kernel lock, regardless of the lock state
-+ of the creator (the lock level is *not* inheritated)
-+ */
-+ lock_kernel();
-+
-+ /* fill in thread structure */
-+ kthread->thread = current;
-+
-+ /* set signal mask to what we want to respond */
-+ siginitsetinv(¤t->blocked, sigmask(SIGKILL)|sigmask(SIGINT)|sigmask(SIGTERM));
-+
-+ /* initialise wait queue */
-+ init_waitqueue_head(&kthread->queue);
-+
-+ /* initialise termination flag */
-+ kthread->terminate = 0;
-+
-+ /* set name of this process (max 15 chars + 0 !) */
-+ sprintf(current->comm, name);
-+
-+ /* let others run */
-+ unlock_kernel();
-+
-+ /* tell the creator that we are ready and let him continue */
-+ //up(&kthread->startstop_sem);
-+
-+}
-+
-+/* cleanup of thread. Called by the exiting thread. */
-+void exit_kthread(kthread_t *kthread)
-+{
-+ /* we are terminating */
-+
-+ /* lock the kernel, the exit will unlock it */
-+ lock_kernel();
-+ kthread->thread = NULL;
-+ mb();
-+
-+ /* notify the stop_kthread() routine that we are terminating. */
-+ //up(&kthread->startstop_sem);
-+ /* the kernel_thread that called clone() does a do_exit here. */
-+
-+ /* there is no race here between execution of the "killer" and real termination
-+ of the thread (race window between up and do_exit), since both the
-+ thread and the "killer" function are running with the kernel lock held.
-+ The kernel lock will be freed after the thread exited, so the code
-+ is really not executed anymore as soon as the unload functions gets
-+ the kernel lock back.
-+ The init process may not have made the cleanup of the process here,
-+ but the cleanup can be done safely with the module unloaded.
-+ */
-+
-+}
-+
-+
-+
-+int os_atoi(const char *pStr)
-+{
-+ int retVal = -1;
-+
-+ if(*pStr=='-')
-+ retVal = -simple_strtoul(pStr+1, (char **)NULL, 10);
-+ else
-+ retVal = simple_strtoul(pStr, (char **)NULL, 10);
-+ return retVal ;
-+}
-+
-+
-+int os_atoh(const char *pStr)
-+{
-+ int retVal = -1;
-+
-+ if(*pStr=='-')
-+ retVal = -simple_strtoul(pStr+1, (char **)NULL, 16);
-+ else
-+ retVal = simple_strtoul(pStr, (char **)NULL, 16);
-+ return retVal ;
-+}
-+
-+unsigned long os_atoul(const char *pStr)
-+{
-+ unsigned long retVal = -1;
-+
-+ retVal = simple_strtoul(pStr, (char **)NULL, 10);
-+ return retVal ;
-+}
-+
-+void dprintf( int uDbgLevel, char * szFmt, ...)
-+{
-+#ifdef DEBUG_BUILD
-+ static char buff[256];
-+ va_list ap;
-+
-+ if( __guDbgLevel < uDbgLevel)
-+ return;
-+
-+ va_start( ap, szFmt);
-+ vsprintf((char *)buff, szFmt, ap);
-+ va_end(ap);
-+ printk("%s", buff);
-+#endif
-+}
-+
-+/*int strcmp(const char *s1, const char *s2)
-+{
-+
-+ int i=0;
-+
-+ while(s1[i] !=0)
-+ {
-+ if(s2[i]==0)
-+ return -1;
-+ if(s1[i] != s2[i])
-+ return 1;
-+ i++;
-+ }
-+ if(s2[i] != 0)
-+ return 1;
-+ return 0;
-+}
-+*/
-+
-+int shim_osLoadFWImage(unsigned char *ptr)
-+{
-+ unsigned int bytesRead;
-+ mm_segment_t oldfs;
-+ static struct file *filp;
-+ unsigned int imageLength=0x4ffff;
-+
-+
-+ dprintf(4, "tn7dsl_read_dsp()\n");
-+
-+ dprintf(4,"open file %s\n", DSP_FIRMWARE_PATH);
-+
-+ filp=filp_open(DSP_FIRMWARE_PATH
-+ ,00,O_RDONLY);
-+
-+ if(filp ==NULL)
-+ {
-+ printk("Failed: Could not open DSP binary file\n");
-+ return -1;
-+ }
-+
-+ if (filp->f_op->read==NULL)
-+ return -1; /* File(system) doesn't allow reads */
-+
-+ /* Now read bytes from postion "StartPos" */
-+ filp->f_pos = 0;
-+ oldfs = get_fs();
-+ set_fs(KERNEL_DS);
-+ bytesRead = filp->f_op->read(filp,ptr,imageLength,&filp->f_pos);
-+
-+ dprintf(4,"file length = %d\n", bytesRead);
-+
-+ set_fs(oldfs);
-+
-+ /* Close the file */
-+ fput(filp);
-+
-+ return bytesRead;
-+}
-+
-+unsigned int shim_read_overlay_page(void *ptr, unsigned int secOffset, unsigned int secLength)
-+{
-+ unsigned int bytesRead;
-+ mm_segment_t oldfs;
-+ struct file *filp;
-+
-+ dprintf(4,"shim_read_overlay_page\n");
-+ //dprintf(4,"sec offset=%d, sec length =%d\n", secOffset, secLength);
-+
-+ filp=filp_open(DSP_FIRMWARE_PATH,00,O_RDONLY);
-+ if(filp ==NULL)
-+ {
-+ printk("Failed: Could not open DSP binary file\n");
-+ return -1;
-+ }
-+
-+ if (filp->f_op->read==NULL)
-+ return -1; /* File(system) doesn't allow reads */
-+
-+ /* Now read bytes from postion "StartPos" */
-+
-+ if(filp->f_op->llseek)
-+ filp->f_op->llseek(filp,secOffset, 0);
-+ oldfs = get_fs();
-+ set_fs(KERNEL_DS);
-+ filp->f_pos = secOffset;
-+ bytesRead = filp->f_op->read(filp,ptr,secLength,&filp->f_pos);
-+
-+ set_fs(oldfs);
-+ /* Close the file */
-+ fput(filp);
-+ return bytesRead;
-+}
-+
-+int shim_osLoadDebugFWImage(unsigned char *ptr)
-+{
-+ return 0;
-+}
-+int shim_osStringCmp(const char *s1, const char *s2)
-+{
-+ return strcmp(s1, s2);
-+}
-+
-+void *shim_osAllocateMemory(unsigned int size)
-+{
-+ return ((void *)kmalloc(size, GFP_KERNEL));
-+}
-+
-+void *shim_osAllocateDmaMemory(unsigned int size)
-+{
-+ /*
-+ int order;
-+
-+ order=1;
-+ size=size/4096;
-+ while(size >= 1)
-+ {
-+ order++;
-+ size=size/2;
-+ }
-+
-+ return ( (void *)__get_free_pages(GFP_ATOMIC, order));
-+ */
-+ //return ((void *)kmalloc(size, GFP_ATOMIC));
-+ //return ((void *)kmalloc(size, GFP_KERNEL));
-+ void *ptr;
-+
-+ ptr = kmalloc(size, GFP_ATOMIC);
-+ if(ptr==NULL)
-+ {
-+ printk("failed atomic\n");
-+ ptr = kmalloc(size, GFP_KERNEL);
-+ if(ptr==NULL)
-+ {
-+ printk("failed kernel\n");
-+ ptr = kmalloc(size, GFP_KERNEL|GFP_DMA);
-+ }
-+ }
-+ printk("size=%d\n", size);
-+ return ptr;
-+
-+}
-+
-+
-+void shim_osFreeMemory(void *ptr, unsigned int size)
-+{
-+
-+ kfree(ptr);
-+}
-+
-+void shim_osFreeDmaMemory(void *ptr, unsigned int size)
-+{
-+/*
-+ int order;
-+
-+ order=1;
-+ size=size/4096;
-+ while(size >=1)
-+ {
-+ order++;
-+ size=size/2;
-+ }
-+ free_pages(ptr, order);
-+*/
-+ kfree(ptr);
-+}
-+
-+void *shim_osAllocateVMemory(unsigned int size)
-+{
-+
-+ return ((void *)vmalloc(size));
-+}
-+
-+void shim_osFreeVMemory(void *ptr, unsigned int size)
-+{
-+ vfree(ptr);
-+}
-+
-+void shim_osMoveMemory(char *dst, char *src, unsigned int numBytes)
-+{
-+ memcpy(dst, src, numBytes);
-+}
-+
-+void shim_osZeroMemory(char *dst, unsigned int numBytes)
-+{
-+ memset(dst, 0, numBytes);
-+}
-+
-+void shim_osWriteBackCache(void *addr, unsigned int size)
-+{
-+ unsigned int i,Size=(((unsigned int)addr)&0xf)+size;
-+
-+ for (i=0;i<Size;i+=16,addr+=16)
-+ {
-+ __asm__(" .set mips3 ");
-+ __asm__(" cache 25, (%0)" : : "r" (addr));
-+ __asm__(" .set mips0 ");
-+ }
-+}
-+
-+void shim_osInvalidateCache(void *addr, unsigned int size)
-+{
-+ unsigned int i,Size=(((unsigned int)addr)&0xf)+size;
-+
-+ for (i=0;i<Size;i+=16,addr+=16)
-+ {
-+ __asm__(" .set mips3 ");
-+ __asm__("cache 17, (%0)" : : "r" (addr));
-+ __asm__(" .set mips0 ");
-+ }
-+}
-+
-+void shim_osClockWait(int val)
-+{
-+ unsigned int chkvalue;
-+ chkvalue=val/64;
-+
-+ if(chkvalue > 1000)
-+ {
-+ mdelay(chkvalue/1000);
-+ return;
-+ }
-+ else
-+ udelay(val/64);
-+} /* end of cwait() */
-+
-+unsigned int shim_osClockTick(int val)
-+{
-+ return jiffies;
-+}
-+
-+int flags;
-+spinlock_t shimLock;
-+
-+void shim_osCriticalEnter(void)
-+{
-+ spin_lock_irqsave(&shimLock, flags);
-+
-+}
-+
-+
-+void shim_osCriticalExit(void)
-+{
-+ spin_unlock_irqrestore(&shimLock, flags);
-+}
-+
-+
-+int tn7dsl_proc_stats(char* buf, char **start, off_t offset, int count,
-+ int *eof, void *data)
-+{
-+
-+ int len = 0;
-+ int limit = count - 80;
-+ int F4count, F5count;
-+
-+
-+ /* Read Ax5 Stats */
-+ dslhal_api_gatherStatistics(pIhw);
-+
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\nAR7 DSL Modem Statistics:\n");
-+ if(len<=limit)
-+ len += sprintf(buf+len, "--------------------------------\n");
-+ /* us and ds Connection Rates */
-+ if(len<=limit)
-+ len += sprintf(buf+len, "[DSL Modem Stats]\n");
-+
-+
-+ if(len<=limit)
-+ {
-+ if(pIhw->lConnected != 1)
-+ {
-+ pIhw->AppData.USConRate = 0;
-+ pIhw->AppData.DSConRate = 0;
-+ }
-+ len += sprintf(buf+len, "\tUS Connection Rate:\t%u\tDS Connection Rate:\t%u\n",
-+ (unsigned int)pIhw->AppData.USConRate,
-+ (unsigned int)pIhw->AppData.DSConRate );
-+ }
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tDS Line Attenuation:\t%u\tDS Margin:\t\t%u\n",
-+ (unsigned int)pIhw->AppData.dsLineAttn/2,
-+ (unsigned int)pIhw->AppData.dsMargin/2 );
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tUS Line Attenuation:\t%u\tUS Margin:\t\t%u\n",
-+ (unsigned int)pIhw->AppData.usLineAttn,
-+ (unsigned int)pIhw->AppData.usMargin );
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tUS Payload :\t\t%u\tDS Payload:\t\t%u\n",
-+ ((unsigned int)pIhw->AppData.usAtm_count[0] + (unsigned int)pIhw->AppData.usAtm_count[1])*48,
-+ ((unsigned int)pIhw->AppData.dsGood_count[0] + (unsigned int)pIhw->AppData.dsGood_count[1])*48);
-+ /* Superframe Count */
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tUS Superframe Cnt :\t%u\tDS Superframe Cnt:\t%u\n",
-+ (unsigned int)pIhw->AppData.usSuperFrmCnt,
-+ (unsigned int)pIhw->AppData.dsSuperFrmCnt );
-+
-+ /* US and DS power */
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tUS Transmit Power :\t%u\tDS Transmit Power:\t%u\n",
-+ (unsigned int)pIhw->AppData.usTxPower/256,
-+ (unsigned int)pIhw->AppData.dsTxPower/256 );
-+ /* DSL Stats Errors*/
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tLOS errors:\t\t%u\tSEF errors:\t\t%u\n",
-+ (unsigned int)pIhw->AppData.LOS_errors,
-+ (unsigned int)pIhw->AppData.SEF_errors );
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tFrame mode:\t\t%u\tMax Frame mode:\t\t%u\n",
-+ (unsigned int)pIhw->AppData.FrmMode,
-+ (unsigned int)pIhw->AppData.MaxFrmMode );
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tTrained Path:\t\t%u\tUS Peak Cell Rate:\t%u\n",
-+ (unsigned int)pIhw->AppData.TrainedPath,
-+ (unsigned int)pIhw->AppData.USConRate*1000/8/53 );
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tTrained Mode:\t\t%u\tSelected Mode:\t\t%u\n",
-+ (unsigned int)pIhw->AppData.TrainedMode, (unsigned int)pIhw->AppData.StdMode );
-+
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tATUC Vendor ID:\t%u\tATUC Revision:\t\t%u\n",
-+ (unsigned int)pIhw->AppData.atucVendorId, pIhw->AppData.atucRevisionNum);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tHybrid Selected:\t%u\n",
-+ (unsigned int)pIhw->AppData.currentHybridNum);
-+
-+ /* Upstream Interleaved Errors */
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\n\t[Upstream (TX) Interleave path]\n");
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
-+ (unsigned int)pIhw->AppData.usICRC_errors,
-+ (unsigned int)pIhw->AppData.usIFEC_errors,
-+ (unsigned int)pIhw->AppData.usINCD_error);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
-+ (unsigned int)pIhw->AppData.usILCD_errors,
-+ (unsigned int)pIhw->AppData.usIHEC_errors);
-+ /* Downstream Interleaved Errors */
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\n\t[Downstream (RX) Interleave path]\n");
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
-+ (unsigned int)pIhw->AppData.dsICRC_errors,
-+ (unsigned int)pIhw->AppData.dsIFEC_errors,
-+ (unsigned int)pIhw->AppData.dsINCD_error);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
-+ (unsigned int)pIhw->AppData.dsILCD_errors,
-+ (unsigned int)pIhw->AppData.dsIHEC_errors);
-+ /* Upstream Fast Errors */
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\n\t[Upstream (TX) Fast path]\n");
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
-+ (unsigned int)pIhw->AppData.usFCRC_errors,
-+ (unsigned int)pIhw->AppData.usFFEC_errors,
-+ (unsigned int)pIhw->AppData.usFNCD_error);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
-+ (unsigned int)pIhw->AppData.usFLCD_errors,
-+ (unsigned int)pIhw->AppData.usFHEC_errors);
-+ /* Downstream Fast Errors */
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\n\t[Downstream (RX) Fast path]\n");
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n",
-+ (unsigned int)pIhw->AppData.dsFCRC_errors,
-+ (unsigned int)pIhw->AppData.dsFFEC_errors,
-+ (unsigned int)pIhw->AppData.dsFNCD_error);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n",
-+ (unsigned int)pIhw->AppData.dsFLCD_errors,
-+ (unsigned int)pIhw->AppData.dsFHEC_errors);
-+ /* ATM stats upstream */
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\n[ATM Stats]");
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\n\t[Upstream/TX]\n");
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tGood Cell Cnt:\t%u\n\tIdle Cell Cnt:\t%u\n\n",
-+ (unsigned int)pIhw->AppData.usAtm_count[0] + (unsigned int)pIhw->AppData.usAtm_count[1],
-+ (unsigned int)pIhw->AppData.usIdle_count[0] + (unsigned int)pIhw->AppData.usIdle_count[1]);
-+ /* ATM stats downstream */
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\n\t[Downstream/RX)]\n");
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tGood Cell Cnt:\t%u\n\tIdle Cell Cnt:\t%u\n\tBad Hec Cell Cnt:\t%u\n",
-+ (unsigned int)pIhw->AppData.dsGood_count[0] + (unsigned int)pIhw->AppData.dsGood_count[1],
-+ (unsigned int)pIhw->AppData.dsIdle_count[0] + (unsigned int)pIhw->AppData.dsIdle_count[1],
-+ (unsigned int)pIhw->AppData.dsBadHec_count[0] + (unsigned int)pIhw->AppData.dsBadHec_count[1]);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tOverflow Dropped Cell Cnt:\t%u\n",
-+ (unsigned int)pIhw->AppData.dsOVFDrop_count[0] + (unsigned int)pIhw->AppData.dsOVFDrop_count[1]);
-+ tn7sar_get_stats(pIhw->pOsContext);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\n[SAR AAL5 Stats]\n");
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tTx PDU's:\t%u\n\tRx PDU's:\t%u\n",
-+ sarStat.txPktCnt,
-+ sarStat.rxPktCnt);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tTx Total Bytes:\t%u\n\tRx Total Bytes:\t%u\n",
-+ sarStat.txBytes,
-+ sarStat.rxBytes);
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\tTx Total Error Counts:\t%u\n\tRx Total Error Counts:\t%u\n\n",
-+ sarStat.txErrors,
-+ sarStat.rxErrors);
-+
-+ /* oam loopback info */
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\n[OAM Stats]\n");
-+
-+ tn7sar_get_near_end_loopback_count(&F4count, &F5count);
-+
-+ if(len<=limit)
-+ {
-+ len += sprintf(buf+len, "\tNear End F5 Loop Back Count:\t%u\n\tNear End F4 Loop Back Count:\t%u\n\tFar End F5 Loop Back Count:\t%u\n\tFar End F4 Loop Back Count:\t%u\n",
-+ F5count,
-+ F4count,
-+ oamFarLBCount[0] + oamFarLBCount[2],
-+ oamFarLBCount[1] + oamFarLBCount[3]);
-+ }
-+ return len;
-+}
-+
-+int
-+tn7dsl_proc_modem(char* buf, char **start, off_t offset, int count,
-+ int *eof, void *data)
-+{
-+
-+ int len = 0;
-+ int limit = count - 80;
-+
-+ char *state;
-+ int tag;
-+
-+ tag= dslhal_api_pollTrainingStatus(pIhw);
-+ tag = pIhw->AppData.bState;
-+
-+ switch(tag){
-+ case 0: state = "ACTREQ"; break;
-+ case 1: state = "QUIET1"; break;
-+ case 2: state = "IDLE"; break;
-+ case 3: state = "INIT"; break;
-+ case 4: state = "RTDL"; break;
-+ case 5: state = "SHOWTIME"; break;
-+ default: state = "unknown"; break;
-+ }
-+
-+ if(pIhw->lConnected == 1)
-+ state = "SHOWTIME";
-+ if(len<=limit)
-+ len += sprintf(buf+len,"%s\n",state);
-+
-+ return len;
-+}
-+
-+
-+
-+int tn7dsl_handle_interrupt(void)
-+{
-+ int intsrc;
-+ unsigned char cMsgRa[6];
-+ short margin;
-+
-+ dprintf(4, "tn7dsl_handle_dsl_interrupt()\n");
-+ if(pIhw)
-+ {
-+ intsrc=dslhal_api_acknowledgeInterrupt(pIhw);
-+ dslhal_api_handleTrainingInterrupt(pIhw, intsrc);
-+
-+ if(pIhw->lConnected == TC_SYNC)
-+ {
-+
-+ if(dslInSync == 0)
-+ {
-+ printk("DSL in Sync\n");
-+ tn7atm_device_connect_status(pIhw->pOsContext, 1);
-+ dslhal_api_initStatistics(pIhw);
-+ dslhal_api_gatherStatistics(pIhw);
-+#ifdef CONFIG_LED_MODULE
-+// led_operation(MOD_ADSL, DEF_ADSL_SYNC);
-+ led_on = DEF_ADSL_SYNC;
-+#endif
-+ /* add auto margin retrain */
-+ if(pIhw->AppData.TrainedMode < 5)
-+ {
-+ if(bMarginRetrainEnable && bMarginThConfig == 0)
-+ {
-+ dslhal_support_getCMsgsRa(pIhw, cMsgRa);
-+ margin = *(unsigned short *)&cMsgRa[4];
-+ margin = (margin >> 6) & 0x3f;
-+ if(margin & 0x20) // highest bit is 1
-+ {
-+ margin = -(margin & 0x1f);
-+ }
-+
-+ //printk("margin = %d, cmsg-ra = %02x %02x %02x %02x %02x %02x\n", margin, cMsgRa[0],cMsgRa[1],cMsgRa[2],cMsgRa[3],cMsgRa[4],cMsgRa[5]);
-+ dslhal_api_setMarginThreshold(pIhw, margin*2); /* DSL margin is in 0.5db */
-+ }
-+ }
-+
-+ }
-+ dslInSync = 1;
-+ }
-+ else
-+ {
-+ if(dslInSync == 1)
-+ {
-+ dslInSync = 0;
-+ tn7atm_device_connect_status(pIhw->pOsContext, 0);
-+ up(&adsl_sem_overlay);
-+ printk("DSL out of syn\n");
-+ }
-+#ifdef CONFIG_LED_MODULE
-+ if(pIhw->AppData.bState < RSTATE_INIT)
-+ {
-+ if(led_on != DEF_ADSL_IDLE)
-+ {
-+// led_operation(MOD_ADSL, DEF_ADSL_IDLE);
-+ led_on = DEF_ADSL_IDLE;
-+ }
-+ }
-+ else
-+ {
-+ if(led_on != DEF_ADSL_TRAINING)
-+ {
-+// led_operation(MOD_ADSL, DEF_ADSL_TRAINING);
-+ led_on = DEF_ADSL_TRAINING;
-+ }
-+
-+ }
-+
-+#endif
-+
-+ }
-+ }
-+ return 0;
-+}
-+
-+
-+int tn7dsl_get_dslhal_version(char *pVer)
-+{
-+ dslVer ver;
-+
-+ dslhal_api_getDslHalVersion(&ver);
-+
-+ memcpy(pVer,&ver,8);
-+ return 0;
-+}
-+
-+int tn7dsl_get_dsp_version(char *pVer)
-+{
-+ dspVer ver;
-+ dslhal_api_getDspVersion(pIhw, &ver);
-+ memcpy(pVer, &ver, 9);
-+ return 0;
-+}
-+
-+
-+static int
-+tn7dsl_get_modulation(void)
-+{
-+ char *ptr = NULL;
-+
-+ dprintf(4, "tn7dsl_get_modulation\n");
-+ //printk("tn7dsl_get_modulation\n");
-+ ptr = prom_getenv("modulation");
-+
-+ if (!ptr) {
-+ //printk("modulation is not set in adam2 env\n");
-+ //printk("Using multimode\n");
-+ return 0;
-+ }
-+ printk("dsl modulation = %s\n", ptr);
-+
-+ tn7dsl_set_modulation(ptr);
-+
-+ return 0;
-+}
-+
-+
-+static int tn7dsl_set_dsl(void)
-+{
-+
-+ char *ptr = NULL;
-+ int value;
-+ int i, offset[2]={4,11},oamFeature=0;
-+ char tmp[4];
-+ char dspVer[10];
-+
-+ // OAM Feature Configuration
-+ dslhal_api_dspInterfaceRead(pIhw,(unsigned int)pIhw->pmainAddr, 2, (unsigned int *)&offset, (unsigned char *)&oamFeature, 4);
-+ oamFeature |= dslhal_support_byteSwap32(0x0000000C);
-+ dslhal_api_dspInterfaceWrite(pIhw,(unsigned int)pIhw->pmainAddr, 2, (unsigned int *)&offset, (unsigned char *)&oamFeature, 4);
-+
-+ // modulation
-+ ptr = prom_getenv("modulation");
-+ if (ptr)
-+ {
-+ printk("dsl modulation = %s\n", ptr);
-+ tn7dsl_set_modulation(ptr);
-+ }
-+
-+ // margin retrain
-+ ptr = NULL;
-+ ptr = prom_getenv("enable_margin_retrain");
-+ if(ptr)
-+ {
-+ value = os_atoi(ptr);
-+ if(value == 1)
-+ {
-+ dslhal_api_setMarginMonitorFlags(pIhw, 0, 1);
-+ bMarginRetrainEnable = 1;
-+ printk("enable showtime margin monitor.\n");
-+ ptr = NULL;
-+ ptr = prom_getenv("margin_threshold");
-+ if(ptr)
-+ {
-+ value = os_atoi(ptr);
-+ printk("Set margin threshold to %d x 0.5 db\n",value);
-+ if(value >= 0)
-+ {
-+ dslhal_api_setMarginThreshold(pIhw, value);
-+ bMarginThConfig=1;
-+ }
-+ }
-+ }
-+ }
-+
-+ // rate adapt
-+ ptr = NULL;
-+ ptr = prom_getenv("enable_rate_adapt");
-+ if(ptr)
-+ {
-+ dslhal_api_setRateAdaptFlag(pIhw, os_atoi(ptr));
-+ }
-+
-+ // trellis
-+ ptr = NULL;
-+ ptr = prom_getenv("enable_trellis");
-+ if(ptr)
-+ {
-+ dslhal_api_setTrellisFlag(pIhw, os_atoi(ptr));
-+ }
-+
-+ // maximum bits per carrier
-+ ptr = NULL;
-+ ptr = prom_getenv("maximum_bits_per_carrier");
-+ if(ptr)
-+ {
-+ dslhal_api_setMaxBitsPerCarrier(pIhw, os_atoi(ptr));
-+ }
-+
-+ // maximum interleave depth
-+ ptr = NULL;
-+ ptr = prom_getenv("maximum_interleave_depth");
-+ if(ptr)
-+ {
-+ dslhal_api_setMaxInterleaverDepth(pIhw, os_atoi(ptr));
-+ }
-+
-+ // inner and outer pairs
-+ ptr = NULL;
-+ ptr = prom_getenv("pair_selection");
-+ if(ptr)
-+ {
-+ dslhal_api_selectInnerOuterPair(pIhw, os_atoi(ptr));
-+ }
-+
-+ ptr = NULL;
-+ ptr = prom_getenv("dgas_polarity");
-+ if(ptr)
-+ {
-+ dslhal_api_configureDgaspLpr(pIhw, 1, 1);
-+ dslhal_api_configureDgaspLpr(pIhw, 0, os_atoi(ptr));
-+ }
-+
-+ ptr = NULL;
-+ ptr = prom_getenv("los_alarm");
-+ if(ptr)
-+ {
-+ dslhal_api_disableLosAlarm(pIhw, os_atoi(ptr));
-+ }
-+
-+ ptr = NULL;
-+ ptr = prom_getenv("eoc_vendor_id");
-+ if(ptr)
-+ {
-+ for(i=0;i<8;i++)
-+ {
-+ tmp[0]=ptr[i*2];
-+ tmp[1]=ptr[i*2+1];
-+ tmp[2]=0;
-+ EOCVendorID[i] = os_atoh(tmp);
-+ //printk("tmp=%s--", tmp);
-+ //printk("ID[%d]=0x%02x ", i, (unsigned char)EOCVendorID[i]);
-+ }
-+ tn7dsl_get_dsp_version(dspVer);
-+ //printk("Annex =%d\n", dspVer[8]);
-+ if(dspVer[8]==2) // annex b
-+ {
-+ //printk("EOCVendorID=%02x %02x %02x %02x %02x %02x %02x %02x\n", EOCVendorID[0], EOCVendorID[1], EOCVendorID[2], EOCVendorID[3],
-+ // EOCVendorID[4], EOCVendorID[5], EOCVendorID[6], EOCVendorID[7]);
-+ dslhal_api_setEocVendorId(pIhw, EOCVendorID);
-+ }
-+
-+ }
-+
-+ return 0;
-+}
-+
-+
-+
-+
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: static void tn7dsl_init(void)
-+ *
-+ * Description: This function initializes
-+ * Ar7 DSL interface
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+
-+int tn7dsl_init(void *priv)
-+{
-+
-+ printk("Initializing DSL interface\n");
-+
-+
-+ /* start dsl */
-+ if(dslhal_api_dslStartup(&pIhw) !=0 )
-+ {
-+ printk("DSL start failed.\n");
-+ return -1;
-+ }
-+
-+ // set dsl into overlay page reload mode
-+ pIhw->bAutoRetrain = 1;
-+
-+ // set default training properties
-+ tn7dsl_set_dsl();
-+
-+ pIhw->pOsContext = priv;
-+
-+ //start_kthread(tn7dsl_reload_overlay, &overlay_thread);
-+
-+ /*register dslss LED with led module */
-+#ifdef CONFIG_LED_MODULE
-+ tn7dsl_register_dslss_led();
-+#endif
-+
-+
-+ return 0; /* What do we return here? */
-+}
-+
-+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+ *
-+ * Function: int avsar_exit(void)
-+ *
-+ * Description: Avalanche SAR exit function
-+ *
-+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
-+
-+void tn7dsl_exit (void)
-+{
-+
-+ bshutdown = 1;
-+#ifdef CONFIG_LED_MODULE
-+#ifdef DEREGISTER_LED
-+ //down(&adsl_sem_overlay);
-+ deregister_led_drv(LED_NUM_1);
-+ deregister_led_drv(LED_NUM_2);
-+#else
-+// led_operation(MOD_ADSL,DEF_ADSL_IDLE);
-+#endif
-+#endif
-+ stop_kthread(&overlay_thread);
-+ dslhal_api_dslShutdown(pIhw);
-+
-+}
-+
-+
-+static int tn7dsl_process_oam_string(int *type, int *pvpi, int *pvci, int *pdelay)
-+{
-+ int i=1;
-+ int j=0;
-+ int vci, vpi;
-+ char tmp[16];
-+ int chan;
-+ int tt;
-+
-+ while(j<8)
-+ {
-+ tmp[j] = mod_req[i];
-+ //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]);
-+ if(tmp[j] == 0x50 || tmp[j] == 0x70)
-+ break;
-+ j++;
-+ i++;
-+ }
-+
-+ tmp[j] = 0;
-+ vpi = os_atoi(tmp);
-+
-+ i++;
-+ j=0;
-+ while(j<8)
-+ {
-+ tmp[j] = mod_req[i];
-+ //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]);
-+ if(tmp[j] == 0x43 || tmp[j] == 0x63)
-+ break;
-+
-+ j++;
-+ i++;
-+ }
-+
-+ vci = os_atoi(tmp);
-+
-+ if(vci==0) // f4 oam
-+ *type = 1;
-+ else
-+ *type = 0;
-+
-+
-+ tt=5000;
-+ i++;
-+ j=0;
-+ tmp[j] = mod_req[i];
-+ if(tmp[j]==0x44 || tmp[j]==0x64)
-+ {
-+ i++;
-+ while(j<8)
-+ {
-+ tmp[j] = mod_req[i];
-+
-+ //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]);
-+ if(tmp[j] == 0x54 || tmp[j] == 0x74)
-+ break;
-+
-+ j++;
-+ i++;
-+ }
-+ tt = os_atoi(tmp);
-+ }
-+
-+ chan = tn7atm_lut_find(vpi, vci);
-+
-+ *pvci=vci;
-+ *pvpi=vpi;
-+ *pdelay =tt;
-+ dprintf(2, "oam chan=%d, type =%d\n", chan, *type);
-+
-+ return chan;
-+}
-+
-+static void tn7dsl_dump_memory(void)
-+{
-+ unsigned int *pUi;
-+ int i=1;
-+ int j=0;
-+ int addr, len;
-+ char tmp[16];
-+
-+
-+ while(j<8)
-+ {
-+ tmp[j] = mod_req[i];
-+ j++;
-+ i++;
-+ }
-+
-+ tmp[j] = 0;
-+
-+ addr = os_atoh(tmp);
-+
-+ printk("start dump address =0x%x\n", addr);
-+ pUi = (unsigned int *)addr;
-+ i++;
-+ j=0;
-+ while(j<8)
-+ {
-+ tmp[j] = mod_req[i];
-+ //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]);
-+ if(tmp[j] == 0x43 || tmp[j] == 0x63)
-+ break;
-+
-+ j++;
-+ i++;
-+ }
-+
-+ len = os_atoi(tmp);
-+ j=0;
-+ for(i=0; i<len; i++)
-+ {
-+ if(j==0)
-+ printk("0x%08x: ", (unsigned int)pUi);
-+ printk("%08x ", *pUi);
-+ pUi++;
-+ j++;
-+ if(j==4)
-+ {
-+ printk("\n");
-+ j=0;
-+ }
-+ }
-+
-+}
-+
-+
-+
-+static int dslmod_sysctl(ctl_table *ctl, int write, struct file * filp,
-+ void *buffer, size_t *lenp)
-+{
-+ char *ptr;
-+ int ret, len = 0;
-+ int chan;
-+ int type;
-+ int vpi,vci,timeout;
-+
-+ if (!*lenp || (filp->f_pos && !write)) {
-+ *lenp = 0;
-+ return 0;
-+ }
-+ /* DSL MODULATION is changed */
-+ if(write)
-+ {
-+ ret = proc_dostring(ctl, write, filp, buffer, lenp);
-+
-+ switch (ctl->ctl_name)
-+ {
-+ case DEV_DSLMOD:
-+ ptr = strpbrk(info, " \t");
-+ strcpy(mod_req, info);
-+
-+ /* parse the string to determine the action */
-+ if(mod_req[0] == 0x45 || mod_req[0] == 0x65 ) // 'e', or 'E' f5 end to end
-+ {
-+ chan = tn7dsl_process_oam_string(&type, &vpi, &vci, &timeout);
-+ tn7sar_oam_generation(pIhw->pOsContext, chan, type, vpi, vci, timeout);
-+ }
-+ else if(mod_req[0] == 0x53 || mod_req[0] == 0x73 ) // 's', or 'S' f5 seg to seg
-+ {
-+ chan=tn7dsl_process_oam_string(&type, &vpi, &vci,&timeout);
-+ type = type | (1<<1);
-+ tn7sar_oam_generation(pIhw->pOsContext, chan, type, vpi, vci,timeout);
-+ }
-+ //debug only. Dump memory
-+ else if(mod_req[0] == 0x44 || mod_req[0] == 0x64 ) // 'd' or 'D'
-+ tn7dsl_dump_memory();
-+ else
-+ tn7dsl_chng_modulation(info);
-+ break;
-+ }
-+ }
-+ else
-+ {
-+ len += sprintf(info+len, mod_req);
-+ ret = proc_dostring(ctl, write, filp, buffer, lenp);
-+ }
-+ return ret;
-+}
-+
-+
-+ctl_table dslmod_table[] = {
-+ {DEV_DSLMOD, "dslmod", info, DSL_MOD_SIZE, 0644, NULL, &dslmod_sysctl},
-+ {0}
-+ };
-+
-+/* Make sure that /proc/sys/dev is there */
-+ctl_table dslmod_root_table[] = {
-+#ifdef CONFIG_PROC_FS
-+ {CTL_DEV, "dev", NULL, 0, 0555, dslmod_table},
-+#endif /* CONFIG_PROC_FS */
-+ {0}
-+ };
-+
-+static struct ctl_table_header *dslmod_sysctl_header;
-+
-+void tn7dsl_dslmod_sysctl_register(void)
-+{
-+ static int initialized;
-+
-+ if (initialized == 1)
-+ return;
-+
-+ dslmod_sysctl_header = register_sysctl_table(dslmod_root_table, 1);
-+ dslmod_root_table->child->de->owner = THIS_MODULE;
-+
-+ /* set the defaults */
-+ info[0] = 0;
-+
-+ initialized = 1;
-+}
-+
-+void tn7dsl_dslmod_sysctl_unregister(void)
-+{
-+ unregister_sysctl_table(dslmod_sysctl_header);
-+}
-+
-+static void
-+tn7dsl_set_modulation(void* data)
-+{
-+ dprintf(4,"tn7dsl_set_modulation\n");
-+
-+ if(!strcmp(data, "T1413"))
-+ {
-+ printk("retraining in T1413 mode\n");
-+ dslhal_api_setTrainingMode(pIhw, T1413_MODE);
-+ return;
-+ }
-+ if(!strcmp(data, "GDMT"))
-+ {
-+ dslhal_api_setTrainingMode(pIhw, GDMT_MODE);
-+ return;
-+ }
-+ if(!strcmp(data, "GLITE"))
-+ {
-+ dslhal_api_setTrainingMode(pIhw, GLITE_MODE);
-+ return;
-+ }
-+ if(!strcmp(data, "MMODE"))
-+ {
-+ dslhal_api_setTrainingMode(pIhw, MULTI_MODE);
-+ return;
-+ }
-+ if(!strcmp(data, "NMODE"))
-+ {
-+ dslhal_api_setTrainingMode(pIhw, NO_MODE);
-+ return;
-+ }
-+
-+ return;
-+}
-+
-+
-+/* Codes added for compiling tiadiag.o for Analog Diagnostic tests */
-+#ifdef ADIAG
-+
-+enum
-+{
-+ HOST_ACTREQ, // Send R-ACKREQ and monitor for C-ACKx
-+ HOST_QUIET, // Sit quietly doing nothing for about 60 seconds, DEFAULT STATE; R_IDLE
-+ HOST_XMITBITSWAP, // Perform upstream bitswap - FOR INTERNAL USE ONLY
-+ HOST_RCVBITSWAP, // Perform downstream bitswap - FOR INTERNAL USE ONLY
-+ HOST_RTDLPKT, // Send a remote download packet - FOR INTERNAL USE ONLY
-+ HOST_CHANGELED, // Read the LED settings and change accordingly
-+ HOST_IDLE, // Sit quiet
-+ HOST_REVERBTEST, // Generate REVERB for manufacturing test
-+ HOST_CAGCTEST, // Set coarse receive gain for manufacturing test
-+ HOST_DGASP, // send Dying Gasp messages through EOC channel
-+ HOST_GHSREQ, // G.hs - FOR INTERNAL USE ONLY
-+ HOST_GHSMSG, // G.hs - FOR INTERNAL USE ONLY
-+ HOST_GHS_SENDGALF, // G.hs - FOR INTERNAL USE ONLY
-+ HOST_GHSEXIT, // G.hs - FOR INTERNAL USE ONLY
-+ HOST_GHSMSG1, // G.hs - FOR INTERNAL USE ONLY
-+ HOST_HYBRID, // Enable/Disable automatic hybrid switch
-+ HOST_RJ11SELECT, // RJ11 inner/outer pair select
-+ HOST_DIGITAL_MEM, // Digital Diags: run external memory tests
-+ HOST_TXREVERB, // AFE Diags: TX path Reverb
-+ HOST_TXMEDLEY, // AFE Diags: TX path Medley
-+ HOST_RXNOISEPOWER, // AFE Diags: RX noise power
-+ HOST_ECPOWER, // AFE Diags: RX eco power
-+ HOST_ALL_ADIAG, // AFE Diags: all major analog diagnostic modes. Host is responsible to initiate each diagnostic sessions
-+ HOST_USER_ADIAG, // AFE Diags: Host fills in analog diagnostic input data structure as specified and requests DSP to perform measurements as specified
-+ HOST_QUIT_ADIAG, // AFE Diags: Host requests DSP to quit current diagnostic session. This is used for stopping the transmit REVERB/MEDLEY
-+ HOST_NO_CMD, // All others - G.hs - FOR INTERNAL USE ONLY
-+ HOST_DSLSS_SHUTDOWN, // Host initiated DSLSS shutdown message
-+ HOST_SET_GENERIC, // Set generic CO profile
-+ HOST_UNDO_GENERIC // Set profile previous to Generic
-+};
-+
-+enum
-+{
-+ DSP_IDLE, // R_IDLE state entered
-+ DSP_ACTMON, // R_ACTMON state entered
-+ DSP_TRAIN, // R_TRAIN state entered
-+ DSP_ACTIVE, // R_ACTIVE state entered
-+ DSP_XMITBITSWAP, // Upstream bitswap complete - FOR INTERNAL USE ONLY
-+ DSP_RCVBITSWAP, // Downstream bitswap complete - FOR INTERNAL USE ONLY
-+ DSP_RTDL, // R_RTDL state entered - FOR INTERNAL USE ONLY
-+ DSP_RRTDLPKT, // RTDL packet received - FOR INTERNAL USE ONLY
-+ DSP_XRTDLPKT, // RTDL packet transmitted - FOR INTERNAL USE ONLY
-+ DSP_ERROR, // Command rejected, wrong state for this command
-+ DSP_REVERBTEST, // Manufacturing REVERB test mode entered
-+ DSP_CAGCTEST, // Manufacturing receive gain test done
-+ DSP_OVERLAY_START, // Notify host that page overlay has started - overlay number indicated by "tag"
-+ DSP_OVERLAY_END, // Notify host that page overlay has ended - overlay number indicated by "tag"
-+ DSP_CRATES1, // CRATES1 message is valid and should be copied to host memory now
-+ DSP_SNR, // SNR calculations are ready and should be copied to host memory now
-+ DSP_GHSMSG, // G.hs - FOR INTERNAL USE ONLY
-+ DSP_RCVBITSWAP_TIMEOUT, // Acknowledge Message was not received within ~500 msec (26 Superframes).
-+ DSP_ATM_TC_SYNC, // Indicates true TC sync on both the upstream and downstream. Phy layer ready for data xfer.
-+ DSP_ATM_NO_TC_SYNC, // Indicates loss of sync on phy layer on either US or DS.
-+ DSP_HYBRID, // DSP completed hybrid switch
-+ DSP_RJ11SELECT, // DSP completed RJ11 inner/outer pair select
-+ DSP_INVALID_CMD, // Manufacturing (Digital and AFE) diags: CMD received not recognized
-+ DSP_TEST_PASSED, // Manufacturing diags: test passed
-+ DSP_TEST_FAILED, // Manufacturing diags: test failed
-+ DSP_TXREVERB, // Manufacturing AFE diags: Response to HOST_TXREVERB
-+ DSP_TXMEDLEY, // Manufacturing AFE diags: Response to HOST_TXMEDLEY
-+ DSP_RXNOISEPOWER, // Manufacturing AFE diags: Response to HOST_RXNOISEPOWER
-+ DSP_ECPOWER, // Manufacturing AFE diags: Response to HOST_ECPOWER
-+ DSP_ALL_ADIAG, // Manufacturing AFE diags: Response to HOST_ALL_ADIAG
-+ DSP_USER_ADIAG, // Manufacturing AFE diags: Response to HOST_USER_ADIAG
-+ DSP_QUIT_ADIAG, // Manufacturing AFE diags: Response to HOST_QUIT_ADIAG
-+ DSP_DGASP // DSP Message to indicate dying gasp
-+};
-+
-+static unsigned char analogNoTonesTestArray[64]=
-+ {
-+ 0,0,0,0,0,0,0,0, // Tones 01-08
-+ 0,0,0,0,0,0,0,0, // Tones 09-16
-+ 0,0,0,0,0,0,0,0, // Tones 17-24
-+ 0,0,0,0,0,0,0,0, // Tones 25-32
-+ 0,0,0,0,0,0,0,0, // Tones 33-40
-+ 0,0,0,0,0,0,0,0, // Tones 41-48
-+ 0,0,0,0,0,0,0,0, // Tones 49-56
-+ 0,0,0,0,0,0,0,0 // Tones 57-64
-+ };
-+
-+static unsigned char analogAllTonesTestArray[64]=
-+ {
-+ 1,1,1,1,1,1,1,1, // Tones 01-08
-+ 1,1,1,1,1,1,1,1, // Tones 09-16
-+ 1,1,1,1,1,1,1,1, // Tones 17-24
-+ 1,1,1,1,1,1,1,1, // Tones 25-32
-+ 1,1,1,1,1,1,1,1, // Tones 33-40
-+ 1,1,1,1,1,1,1,1, // Tones 41-48
-+ 1,1,1,1,1,1,1,1, // Tones 49-56
-+ 1,1,1,1,1,1,1,1 // Tones 57-64
-+ };
-+
-+static unsigned char analogEvenTonesTestArray[64]=
-+ {
-+ 0,1,0,1,0,1,0,1, // Tones 01-08
-+ 0,1,0,1,0,1,0,1, // Tones 09-16
-+ 0,1,0,1,0,1,0,1, // Tones 17-24
-+ 0,1,0,1,0,1,0,1, // Tones 25-32
-+ 0,1,0,1,0,1,0,1, // Tones 33-40
-+ 0,1,0,1,0,1,0,1, // Tones 41-48
-+ 0,1,0,1,0,1,0,1, // Tones 49-56
-+ 0,1,0,1,0,1,0,1 // Tones 57-64
-+ };
-+
-+static unsigned char analogOddTonesTestArray[64]=
-+ {
-+ 1,0,1,0,1,0,1,0, // Tones 01-08
-+ 1,0,1,0,1,0,1,0, // Tones 09-16
-+ 1,0,1,0,1,0,1,0, // Tones 17-24
-+ 1,0,1,0,1,0,1,0, // Tones 25-32
-+ 1,0,1,0,1,0,1,0, // Tones 33-40
-+ 1,0,1,0,1,0,1,0, // Tones 41-48
-+ 1,0,1,0,1,0,1,0, // Tones 49-56
-+ 1,0,1,0,1,0,1,0 // Tones 57-64
-+ };
-+
-+unsigned int shim_osGetCpuFrequency(void)
-+{
-+ return 150;
-+}
-+
-+static void tn7dsl_adiag(int Test, unsigned char *missingTones)
-+{
-+ int rc,cmd, tag;
-+
-+ rc = dslhal_diags_anlg_setMissingTones(pIhw,missingTones);
-+ if(rc)
-+ {
-+ printk(" failed to set Missing town\n");
-+ return;
-+ }
-+
-+/*********** Start the actual test **********************/
-+
-+ if(Test==0)
-+ {
-+ printk("TX REVERB Test\n");
-+ rc = dslhal_support_writeHostMailbox(pIhw, HOST_TXREVERB, 0, 0, 0);
-+ if (rc)
-+ {
-+ printk("HOST_TXREVERB failed\n");
-+ return;
-+ }
-+
-+ }
-+ if(Test==1)
-+ {
-+ dprintf(0,"TX MEDLEY Test\n");
-+ rc = dslhal_support_writeHostMailbox(pIhw, HOST_TXMEDLEY, 0, 0, 0);
-+ if (rc)
-+ return;
-+ }
-+ dprintf(4,"dslhal_diags_anlg_testA() done\n");
-+ return;
-+}
-+
-+
-+static void tn7dsl_diagnostic_test(char *data)
-+{
-+ if(!strcmp(data, "ADIAGRALL"))
-+ {
-+ printk("TX Reverb All tone\n");
-+ tn7dsl_adiag(0,analogAllTonesTestArray);
-+ return;
-+ }
-+ if(!strcmp(data, "ADIAGRNONE"))
-+ {
-+ printk("TX Reverb No tone\n");
-+ tn7dsl_adiag(0,analogNoTonesTestArray);
-+ return;
-+ }
-+ if(!strcmp(data, "ADIAGREVEN"))
-+ {
-+ printk("TX Reverb Even tone\n");
-+ tn7dsl_adiag(0,analogEvenTonesTestArray);
-+ return;
-+ }
-+ if(!strcmp(data, "ADIAGRODD"))
-+ {
-+ printk("TX Reverb Odd tone\n");
-+ tn7dsl_adiag(0,analogOddTonesTestArray);
-+ return;
-+ }
-+ if(!strcmp(data, "ADIAGMALL"))
-+ {
-+ printk("TX Mdelay All tone\n");
-+ tn7dsl_adiag(1,analogAllTonesTestArray);
-+ return;
-+ }
-+ if(!strcmp(data, "ADIAGMNONE"))
-+ {
-+ printk("TX Mdelay No tone\n");
-+ tn7dsl_adiag(1,analogNoTonesTestArray);
-+ return;
-+ }
-+ if(!strcmp(data, "ADIAGMEVEN"))
-+ {
-+ printk("TX Mdelay Even tone\n");
-+ tn7dsl_adiag(1,analogEvenTonesTestArray);
-+ return;
-+ }
-+ if(!strcmp(data, "ADIAGMODD"))
-+ {
-+ printk("TX Mdelay Odd tone\n");
-+ tn7dsl_adiag(1,analogOddTonesTestArray);
-+ return;
-+ }
-+ if(!strcmp(data, "ADIAGQUIET"))
-+ {
-+ dslhal_api_sendIdle(pIhw);
-+ return;
-+ }
-+ if(!strncmp(data, "ADIAGRN", 7))
-+ {
-+ char tones[64], tmp[4];
-+ int nth, i;
-+
-+ tmp[0]=data[7];
-+ tmp[1]=data[8];
-+ tmp[2]=data[9];
-+
-+ nth = os_atoi(tmp);
-+
-+ for(i=0;i<64;i++)
-+ {
-+ if(((i+1)% nth)==0)
-+ {
-+ tones[i]=0;
-+ }
-+ else
-+ {
-+ tones[i]=1;
-+ }
-+ }
-+ printk("TX Reverb with %dth tones missing.\n", nth);
-+ tn7dsl_adiag(0,tones);
-+ return;
-+ }
-+ if(!strncmp(data, "ADIAGMN", 7))
-+ {
-+ char tones[64], tmp[4];
-+ int nth, i;
-+
-+ tmp[0]=data[7];
-+ tmp[1]=data[8];
-+ tmp[2]=data[9];
-+ nth = os_atoi(tmp);
-+
-+ for(i=0;i<64;i++)
-+ {
-+ if(((i+1)% nth)==0)
-+ {
-+ tones[i]=0;
-+ }
-+ else
-+ {
-+ tones[i]=1;
-+ }
-+ }
-+ printk("TX Mdelay with %dth tones missing.\n", nth);
-+ tn7dsl_adiag(1,tones);
-+ return;
-+ }
-+
-+
-+}
-+
-+#endif
-+
-+static void
-+tn7dsl_chng_modulation(void* data)
-+{
-+ //printk("DSL Modem Retraining\n");
-+
-+ if(!strcmp(data, "T1413"))
-+ {
-+ printk("retraining in T1413 mode\n");
-+ dslhal_api_setTrainingMode(pIhw, T1413_MODE);
-+ dslhal_api_sendQuiet(pIhw);
-+ return;
-+ }
-+ if(!strcmp(data, "GDMT"))
-+ {
-+ dslhal_api_setTrainingMode(pIhw, GDMT_MODE);
-+ dslhal_api_sendQuiet(pIhw);
-+ return;
-+ }
-+ if(!strcmp(data, "GLITE"))
-+ {
-+ dslhal_api_setTrainingMode(pIhw, GLITE_MODE);
-+ dslhal_api_sendQuiet(pIhw);
-+ return;
-+ }
-+ if(!strcmp(data, "MMODE"))
-+ {
-+ dslhal_api_setTrainingMode(pIhw, MULTI_MODE);
-+ dslhal_api_sendQuiet(pIhw);
-+ return;
-+ }
-+ if(!strcmp(data, "NMODE"))
-+ {
-+ dslhal_api_setTrainingMode(pIhw, NO_MODE);
-+ dslhal_api_sendQuiet(pIhw);
-+ return;
-+ }
-+
-+#ifdef ADIAG
-+ tn7dsl_diagnostic_test(data);
-+#endif
-+
-+
-+ return;
-+}
-+
-+#ifdef CONFIG_LED_MODULE
-+static void tn7dsl_led_on(unsigned long parm)
-+{
-+ dslhal_api_configureLed(pIhw,parm, 0);
-+}
-+
-+
-+static void tn7dsl_led_off(unsigned long parm)
-+{
-+ dslhal_api_configureLed(pIhw,parm, 1);
-+}
-+
-+static void tn7dsl_led_init(unsigned long parm)
-+{
-+ dslhal_api_configureLed(pIhw,parm, 2);
-+}
-+#endif
-+
-+static void tn7dsl_register_dslss_led(void)
-+{
-+#ifdef CONFIG_LED_MODULE
-+
-+ // register led0 with led module
-+ ledreg[0].param = 0;
-+ ledreg[0].init = (void *)tn7dsl_led_init;
-+ ledreg[0].onfunc = (void *)tn7dsl_led_on;
-+ ledreg[0].offfunc = (void *)tn7dsl_led_off;
-+ register_led_drv(LED_NUM_1, &ledreg[0]);
-+
-+ // register led1 output with led module
-+ ledreg[1].param = 1;
-+ ledreg[1].init = (void *)tn7dsl_led_init;
-+ ledreg[1].onfunc = (void *)tn7dsl_led_on;
-+ ledreg[1].offfunc = (void *)tn7dsl_led_off;
-+ register_led_drv(LED_NUM_2, &ledreg[1]);
-+#endif
-+}
-+
-+static int tn7dsl_reload_overlay(void)
-+{
-+ int overlayFlag;
-+ spinlock_t overlayLock;
-+
-+ init_kthread(&overlay_thread, "adsl");
-+ down(&adsl_sem_overlay);
-+ while(1)
-+ {
-+ mdelay(500);
-+ if(pIhw->lConnected == 0)
-+ {
-+ spin_lock_irqsave(&overlayLock, overlayFlag);
-+ dslhal_support_restoreTrainingInfo(pIhw);
-+ spin_unlock_irqrestore(&overlayLock, overlayFlag);
-+ }
-+ down(&adsl_sem_overlay);
-+ }
-+ return 0;
-+}
-+
-+
-+
-+
-diff -urN linux.old/drivers/atm/sangam_atm/tn7sar.c linux.dev/drivers/atm/sangam_atm/tn7sar.c
---- linux.old/drivers/atm/sangam_atm/tn7sar.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/tn7sar.c 2005-08-23 04:46:50.110841720 +0200
-@@ -0,0 +1,1376 @@
-+/******************************************************************************
-+ * FILE PURPOSE: OS files for CPSAR
-+ ******************************************************************************
-+ * FILE NAME: tn7sar.c
-+ *
-+ * DESCRIPTION: This file contains source for required os files for CPSAR
-+ *
-+ * (C) Copyright 2002, Texas Instruments Inc
-+ *
-+ *
-+ * Revision History:
-+ * 0/11/02 Zhicheng Tang, created.
-+ *
-+ *******************************************************************************/
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/atmdev.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/smp_lock.h>
-+#include <asm/io.h>
-+#include <asm/mips-boards/prom.h>
-+#include <linux/proc_fs.h>
-+#include <linux/string.h>
-+#include <linux/ctype.h>
-+
-+
-+#define _CPHAL_AAL5
-+#define _CPHAL_SAR
-+#define _CPHAL_HAL
-+typedef void OS_PRIVATE;
-+typedef void OS_DEVICE;
-+typedef void OS_SENDINFO;
-+typedef void OS_RECEIVEINFO;
-+typedef void OS_SETUP;
-+
-+#include "cpswhal_cpsar.h"
-+#include "tn7atm.h"
-+#include "tn7api.h"
-+
-+
-+/* PDSP Firmware files */
-+#include "tnetd7300_sar_firm.h"
-+
-+
-+enum
-+{
-+ PACKET_TYPE_AAL5,
-+ PACKET_TYPE_NULL,
-+ PACKET_TYPE_OAM,
-+ PACKET_TYPE_TRANS,
-+ PACKET_TYPE_AAL2
-+}PACKET_TYPE;
-+
-+enum
-+{
-+ OAM_PING_FAILED,
-+ OAM_PING_SUCCESS,
-+ OAM_PING_PENDING,
-+ OAM_PING_NOT_STARTED
-+}OAM_PING;
-+
-+/* PDSP OAM General Purpose Registers (@todo: These need to be used in the HAL!) */
-+
-+#define SAR_PDSP_HOST_OAM_CONFIG_REG_ADDR 0xa3000020
-+#define SAR_PDSP_OAM_CORR_REG_ADDR 0xa3000024
-+#define SAR_PDSP_OAM_LB_RESULT_REG_ADDR 0xa3000028
-+#define SAR_PDSP_OAM_F5LB_COUNT_REG_ADDR 0xa300002c
-+#define SAR_PDSP_OAM_F4LB_COUNT_REG_ADDR 0xa3000030
-+
-+#define SAR_FREQUNCY 50000000
-+
-+#define AAL5_PARM "id=aal5, base = 0x03000000, offset = 0, int_line=15, ch0=[RxBufSize=1522; RxNumBuffers = 32; RxServiceMax = 50; TxServiceMax=50; TxNumBuffers=32; CpcsUU=0x5aa5; TxVc_CellRate=0x3000; TxVc_AtmHeader=0x00000640]"
-+#define SAR_PARM "id=sar,base = 0x03000000, reset_bit = 9, offset = 0; UniNni = 0, PdspEnable = 1"
-+#define RESET_PARM "id=ResetControl, base=0xA8611600"
-+#define CH0_PARM "RxBufSize=1522, RxNumBuffers = 32, RxServiceMax = 50, TxServiceMax=50, TxNumBuffers=32, CpcsUU=0x5aa5, TxVc_CellRate=0x3000, TxVc_AtmHeader=0x00000640"
-+
-+#define MAX_PVC_TABLE_ENTRY 16
-+
-+sar_stat_t sarStat;
-+
-+typedef struct _channel_parm
-+{
-+ unsigned int RxBufSize;
-+ unsigned int RxNumBuffers;
-+ unsigned int RxServiceMax;
-+ unsigned int TxServiceMax;
-+ unsigned int TxNumBuffers;
-+ unsigned int CpcsUU;
-+ unsigned int TxVc_CellRate;
-+ unsigned int TxVc_AtmHeader;
-+}channel_parm_t;
-+
-+typedef struct _aal5_parm
-+{
-+ unsigned int base;
-+ unsigned int offset;
-+ unsigned int int_line;
-+ channel_parm_t chan[8];
-+}aal5_parm_t;
-+
-+
-+typedef struct _sar_parm
-+{
-+ unsigned int base;
-+ unsigned int reset_bit;
-+ unsigned int offset;
-+ unsigned int UniNni;
-+}sar_parm_t;
-+
-+typedef struct _pvc_table
-+{
-+ int bInUse;
-+ int vpi;
-+ int vci;
-+}pvc_table;
-+
-+static aal5_parm_t aal5Parm;
-+static sar_parm_t sarParm;
-+static char *pAal5, *pSar, *pReset;
-+static int oam_type;
-+static unsigned int oamPingStatus;
-+static int oamAtmHdr;
-+static int oamLbTimeout;
-+static char parm_data[1024];
-+static char aal5Data[1024];
-+static char sarData[1024];
-+static char resetData[256];
-+static pvc_table pvc_result[MAX_PVC_TABLE_ENTRY];
-+
-+/* external function */
-+extern int __guDbgLevel;
-+
-+/* gloabal function */
-+unsigned int oamFarLBCount[4];
-+/* end of gloabal function */
-+
-+/* internal APIs */
-+static int tn7sar_atm_header(int vpi, int vci);
-+static void tn7sar_record_pvc(int atmheader);
-+
-+/*end of internal APIs */
-+spinlock_t sar_lock;
-+
-+/* HAL OS support functions */
-+
-+
-+unsigned long tn7sar_strtoul(const char *str, char **endptr, int base)
-+{
-+ unsigned long ret;
-+
-+ ret= simple_strtoul(str, endptr, base);
-+ return ret;
-+}
-+
-+static void *tn7sar_malloc(unsigned int size)
-+{
-+ return(kmalloc(size, GFP_KERNEL));
-+}
-+
-+static unsigned long lockflags;
-+static void tn7sar_critical_on(void)
-+{
-+ spin_lock_irqsave(&sar_lock,lockflags);
-+}
-+
-+static void tn7sar_critical_off(void)
-+{
-+ spin_unlock_irqrestore(&sar_lock,lockflags);
-+}
-+
-+static void tn7sar_data_invalidate(void *pmem, int size)
-+{
-+ unsigned int i,Size=(((unsigned int)pmem)&0xf)+size;
-+
-+ for (i=0;i<Size;i+=16,pmem+=16)
-+ {
-+ __asm__(" .set mips3 ");
-+ __asm__("cache 17, (%0)" : : "r" (pmem));
-+ __asm__(" .set mips0 ");
-+ }
-+
-+}
-+
-+static void tn7sar_data_writeback(void *pmem, int size)
-+{
-+ unsigned int i,Size=(((unsigned int)pmem)&0xf)+size;
-+
-+ for (i=0;i<Size;i+=16,pmem+=16)
-+ {
-+ __asm__(" .set mips3 ");
-+ __asm__(" cache 25, (%0)" : : "r" (pmem));
-+ __asm__(" .set mips0 ");
-+ }
-+}
-+
-+
-+static int
-+tn7sar_find_device(int unit, const char *find_name, void *device_info)
-+{
-+ int ret_val = 0;
-+ char **ptr;
-+
-+ ptr = (char **)device_info;
-+ dprintf(3,"tn7sar_find_device\n");
-+ if(strcmp(find_name, "aal5")==0)
-+ {
-+ //dprintf(4,"pAal5=%s\n", pAal5);
-+ *ptr = pAal5;
-+ }
-+ else if(strcmp(find_name, "sar")==0)
-+ {
-+ dprintf(3, "pSar=%s\n", pSar);
-+ *ptr = pSar;
-+ }
-+ else if(strcmp(find_name, "reset")==0)
-+ {
-+ dprintf(3, "pReset=%s\n", pReset);
-+ *ptr = pReset;
-+ }
-+
-+ device_info = NULL;
-+
-+ return(ret_val);
-+}
-+
-+static int
-+tn7sar_get_device_parm_uint(void *dev_info, const char *param, unsigned int *value)
-+{
-+ char *dev_str;
-+ char *pMatch;
-+ int i=0, j=0;
-+ char val_str[64];
-+ unsigned int val;
-+ int base = 10;
-+
-+ dprintf(6, "tn7sar_get_device_parm_uint()\n");
-+
-+ dev_str = (char *)dev_info;
-+ dprintf(3, "parm=%s\n", param);
-+ pMatch = strstr(dev_str, param);
-+ //dprintf(4, "pMatch=%s\n", pMatch);
-+ if(pMatch)
-+ {
-+ //get "=" position
-+ while(pMatch[i] != 0x3d)
-+ {
-+ i++;
-+ }
-+ i++;
-+ // get rid of spaces
-+ while(pMatch[i]==0x20)
-+ {
-+ i++;
-+ }
-+ //get rid of 0x
-+ if(pMatch[i]==0x30)
-+ {
-+ if(pMatch[i+1] == 0x58 || pMatch[i+1] == 0x78)
-+ {
-+ i+=2;
-+ base = 16;
-+ }
-+ }
-+
-+ // get next delineator
-+ while(pMatch[i] != 0x2c && pMatch[i] != 0x0)
-+ {
-+ val_str[j]=pMatch[i];
-+ j++;
-+ i++;
-+ }
-+ val_str[j]=0;
-+ //dprintf(4, "val_str=\n%s\n", val_str);
-+ //xdump(val_str, strlen(val_str) + 1, 4);
-+ val = simple_strtoul(val_str, (char **)NULL, base);
-+ dprintf(4, "val =%d\n", val);
-+ *value = val;
-+ return 0;
-+ }
-+
-+
-+ dprintf(3, "match not found.\n");
-+ if(strcmp(dev_str, "debug")==0)
-+ {
-+ dprintf(6,"debug..\n");
-+ *value = 6;
-+ return 0;
-+ }
-+ return (1);
-+}
-+
-+static int tn7sar_get_device_parm_value(void *dev_info, const char *param, void *value)
-+{
-+ char *dev_str;
-+ char *pMatch;
-+ int i=0, j=0;
-+ char *pVal;
-+
-+
-+ dprintf(3, "tn7sar_get_device_parm_value().\n");
-+
-+ pVal = (char *) parm_data;
-+ dev_str = (char *)dev_info;
-+ dprintf(3, "dev_info: \n%s\n", dev_str);
-+ dprintf(3, "param=%s\n", param);
-+ if(strcmp(param, "Ch0")==0)
-+ {
-+ *(char **)value = CH0_PARM;
-+ dprintf(3, "value =%s\n", *(char **)value);
-+ return 0;
-+ }
-+
-+ pMatch = strstr(dev_str, param);
-+ if(pMatch)
-+ {
-+ //get "=" position
-+ while(pMatch[i] != 0x3d)
-+ {
-+ i++;
-+ }
-+ i++;
-+ // get rid of spaces
-+ while(pMatch[i]==0x20)
-+ {
-+ i++;
-+ }
-+
-+ if(pMatch[i] != 0x5b) //"["
-+ {
-+ // get next delineator
-+ while(pMatch[i] != 0x2c && pMatch[i] != 0x0)
-+ {
-+ pVal[j] = pMatch[i];
-+ j++;
-+ i++;
-+ }
-+ pVal[j]=0;
-+
-+ *(char **)value = pVal;
-+ return 0;
-+ }
-+ else
-+ {
-+ i++; //skip "["
-+ while(pMatch[i] != 0x5d)
-+ {
-+ if(pMatch[i] == 0x3b) //";"
-+ pVal[j] = 0x2c;
-+ else
-+ pVal[j] = pMatch[i];
-+ j++;
-+ i++;
-+ }
-+ pVal[j] = 0;
-+ *(char **)value = pVal;
-+ return 0;
-+ }
-+
-+ }
-+
-+ return (1);
-+}
-+
-+static void tn7sar_free(void *pmem)
-+{
-+ kfree(pmem);
-+}
-+
-+static void
-+tn7sar_free_buffer(OS_RECEIVEINFO *os_receive_info, void *pmem)
-+{
-+ tn7atm_free_rx_skb(os_receive_info);
-+}
-+
-+static void tn7sar_free_dev(void *pmem)
-+{
-+ kfree(pmem);
-+}
-+
-+static void tn7sar_free_dma_xfer(void *pmem)
-+{
-+ kfree(pmem);
-+}
-+
-+
-+static int
-+tn7sar_control(void *dev_info, const char *key, const char *action, void *value)
-+{
-+ int ret_val = -1;
-+
-+ if (strcmp(key, "Firmware") == 0)
-+ {
-+ if (strcmp(action, "Get") == 0)
-+ {
-+ *(int **)value = &SarPdspFirmware[0];
-+ }
-+ ret_val=0;
-+ }
-+
-+ if (strcmp(key, "FirmwareSize") == 0)
-+ {
-+ if (strcmp(action, "Get") == 0)
-+ {
-+ *(int *)value = sizeof(SarPdspFirmware);
-+ }
-+ ret_val=0;
-+ }
-+
-+ if (strcmp(key, "OamLbResult") == 0)
-+ {
-+ dprintf(2, "get looback source call back\n");
-+ if (strcmp(action, "Set") == 0)
-+ {
-+ dprintf(2, "oam result = %d\n", *(unsigned int *)value);
-+ oamFarLBCount[oam_type] = oamFarLBCount[oam_type] + *(unsigned int *)value;
-+ if(oamPingStatus == OAM_PING_PENDING)
-+ {
-+ oamPingStatus = *(unsigned int *)value;
-+ if(oamPingStatus == OAM_PING_SUCCESS)
-+ {
-+ /* record pvc */
-+ tn7sar_record_pvc(oamAtmHdr);
-+ }
-+ }
-+
-+ }
-+ ret_val=0;
-+ }
-+
-+ if (strcmp(key, "SarFreq") == 0)
-+ {
-+ if (strcmp(action, "Get") == 0)
-+ {
-+ *(int *)value = SAR_FREQUNCY;
-+ }
-+ ret_val=0;
-+ }
-+ return(ret_val);
-+}
-+
-+
-+static void
-+tn7sar_sarhal_isr_register(OS_DEVICE *os_dev, int(*hal_isr)(HAL_DEVICE *, int *), int interrupt_num)
-+{
-+ tn7atm_sarhal_isr_register(os_dev, hal_isr, interrupt_num);
-+}
-+
-+static void
-+tn7sar_isr_unregister(OS_DEVICE *os_dev, int interrupt_num)
-+{
-+ /* TODO */
-+}
-+
-+
-+static void *
-+tn7sar_malloc_rxbuffer(unsigned int size, void *mem_base, unsigned int mem_range, HAL_DEVICE *hal_dev,
-+ HAL_RECEIVEINFO *hal_info, OS_RECEIVEINFO **os_receive_info, OS_DEVICE *os_dev)
-+{
-+ return tn7atm_allocate_rx_skb(os_dev, os_receive_info, size);
-+}
-+
-+static void *
-+tn7sar_malloc_dev(unsigned int size)
-+{
-+ return(kmalloc(size, GFP_KERNEL));
-+}
-+
-+static void *
-+tn7sar_malloc_dma_xfer(unsigned int size, void *mem_base, unsigned int mem_range)
-+{
-+ dprintf(4, "tn7sar_malloc_dma_xfer, size =%d\n", size);
-+
-+ return (kmalloc(size, GFP_DMA |GFP_KERNEL));
-+
-+}
-+
-+static void *
-+tn7sar_memset(void *dst, int set_char, size_t count)
-+{
-+ return (memset(dst, set_char, count));
-+}
-+
-+static int tn7sar_printf(const char *format, ...)
-+{
-+ /* TODO: add debug levels */
-+ static char buff[256];
-+ va_list ap;
-+
-+ va_start( ap, format);
-+ vsprintf((char *)buff, format, ap);
-+ va_end(ap);
-+
-+ printk("SAR HAL: %s\n", buff);
-+ return(0);
-+}
-+
-+static void tn7sar_record_pvc(int atmheader)
-+{
-+ int vci,vpi;
-+ int i;
-+
-+ vci = 0xffff & (atmheader >> 4);
-+ vpi = 0xff & (atmheader >> 20);
-+ for(i=0;i<MAX_PVC_TABLE_ENTRY;i++)
-+ {
-+ if(pvc_result[i].bInUse)
-+ {
-+ if(pvc_result[i].vpi == vpi && pvc_result[i].vci == vci)
-+ {
-+ return;
-+ }
-+ }
-+ }
-+ for(i=0;i<MAX_PVC_TABLE_ENTRY;i++)
-+ {
-+ if(pvc_result[i].bInUse == 0)
-+ {
-+ pvc_result[i].bInUse = 1;
-+ pvc_result[i].vpi = vpi;
-+ pvc_result[i].vci = vci;
-+ return;
-+ }
-+ }
-+ return;
-+}
-+
-+static void tn7sar_clear_pvc_table(void)
-+{
-+ int i;
-+
-+ for(i=0;i<MAX_PVC_TABLE_ENTRY; i++)
-+ {
-+ pvc_result[i].bInUse = 0;
-+ pvc_result[i].vpi = 0;
-+ pvc_result[i].vci = 0;
-+ }
-+}
-+
-+int tn7sar_process_unmatched_oam(FRAGLIST *frag_list, unsigned int frag_count, unsigned int packet_size, unsigned int mode)
-+{
-+
-+ FRAGLIST *local_list;
-+ int i;
-+ unsigned int atmHdr;
-+
-+ local_list = frag_list;
-+
-+ for(i=0;i<(int)frag_count;i++)
-+ {
-+ tn7sar_data_invalidate(local_list->data, (int)local_list->len);
-+ local_list ++;
-+ }
-+ local_list = frag_list;
-+ if((mode>>31)) /*vci, vpi is attached */
-+ {
-+ atmHdr = *(unsigned int *)frag_list->data;
-+ tn7sar_record_pvc(atmHdr);
-+ if(atmHdr & 0x8) //oam cell
-+ {
-+ atmHdr &= 0xfffffff0;
-+ if(atmHdr == oamAtmHdr)
-+ {
-+ if(oamPingStatus == OAM_PING_PENDING)
-+ {
-+ oamPingStatus = OAM_PING_SUCCESS;
-+ oamFarLBCount[oam_type] = oamFarLBCount[oam_type] + 1;
-+ }
-+ return 0;
-+ }
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static int
-+tn7sar_receive(OS_DEVICE *os_dev,FRAGLIST *frag_list, unsigned int frag_count, unsigned int packet_size,
-+ HAL_RECEIVEINFO *hal_receive_info, unsigned int mode)
-+{
-+ int ch;
-+ struct atm_dev *dev;
-+ Tn7AtmPrivate *priv;
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+ int bRet;
-+
-+
-+ dprintf(4, "tn7sar_receive\n");
-+
-+ dev = (struct atm_dev *)os_dev;
-+ priv= (Tn7AtmPrivate *)dev->dev_data;
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+
-+ /* Mode contains channel info */
-+ ch = (mode & 0xFF);
-+
-+ if(ch == 15)
-+ {
-+ tn7sar_process_unmatched_oam(frag_list, frag_count, packet_size, mode);
-+ pHalFunc->RxReturn(hal_receive_info, 0);
-+ return 0;
-+ }
-+
-+ if(frag_count > 1 || frag_list->len == 0)
-+ {
-+ printk("Packet fragment count > 1, not handdle.\n");
-+ return 1;
-+ }
-+
-+ tn7sar_data_invalidate(frag_list->data, (int)frag_list->len);
-+ bRet=tn7atm_receive(os_dev, ch, packet_size, frag_list->OsInfo, frag_list->data);
-+
-+ if(bRet==0)
-+ {
-+ sarStat.rxPktCnt++;
-+ sarStat.rxBytes += packet_size;
-+ pHalFunc->RxReturn(hal_receive_info, 1);
-+ }
-+ else
-+ {
-+ pHalFunc->RxReturn(hal_receive_info, 0);
-+ }
-+
-+ return bRet;
-+}
-+
-+static int
-+tn7sar_send_complete(OS_SENDINFO *osSendInfo)
-+{
-+ return (tn7atm_send_complete(osSendInfo));
-+}
-+
-+void
-+tn7sar_teardown_complete(OS_DEVICE *OsDev, int ch, int Dir)
-+{
-+ return;
-+}
-+
-+
-+/*
-+unsigned int tn7sar_virt(unsigned int address)
-+{
-+ return phys_to_virt(address);
-+}
-+*/
-+
-+int tn7sar_init_module(OS_FUNCTIONS *os_funcs)
-+{
-+ dprintf(4, "tn7sar_init_module\n");
-+ if( os_funcs == 0 )
-+ {
-+ return(-1);
-+ }
-+ os_funcs->Control = tn7sar_control;
-+ os_funcs->CriticalOn = tn7sar_critical_on;
-+ os_funcs->CriticalOff = tn7sar_critical_off;
-+ os_funcs->DataCacheHitInvalidate = tn7sar_data_invalidate;
-+ os_funcs->DataCacheHitWriteback = tn7sar_data_writeback;
-+ os_funcs->DeviceFindInfo = tn7sar_find_device;
-+ os_funcs->DeviceFindParmUint = tn7sar_get_device_parm_uint;
-+ os_funcs->DeviceFindParmValue = tn7sar_get_device_parm_value;
-+ os_funcs->Free = tn7sar_free;
-+ os_funcs->FreeRxBuffer = tn7sar_free_buffer;
-+ os_funcs->FreeDev = tn7sar_free_dev;
-+ os_funcs->FreeDmaXfer = tn7sar_free_dma_xfer;
-+ os_funcs->IsrRegister = tn7sar_sarhal_isr_register;
-+ os_funcs->IsrUnRegister = tn7sar_isr_unregister;
-+ os_funcs->Malloc = tn7sar_malloc;
-+ os_funcs->MallocRxBuffer = tn7sar_malloc_rxbuffer;
-+ os_funcs->MallocDev = tn7sar_malloc_dev;
-+ os_funcs->MallocDmaXfer = tn7sar_malloc_dma_xfer;
-+ os_funcs->Memset = tn7sar_memset;
-+ os_funcs->Printf = tn7sar_printf;
-+ os_funcs->Receive = tn7sar_receive;
-+ os_funcs->SendComplete = tn7sar_send_complete;
-+ os_funcs->Strcmpi = strcmp;
-+ os_funcs->Sprintf = sprintf;
-+ os_funcs->Strlen = strlen;
-+ os_funcs->Strstr = strstr;
-+ os_funcs->Strtoul = tn7sar_strtoul;
-+ os_funcs->TeardownComplete = tn7sar_teardown_complete;
-+
-+ return(0);
-+}
-+
-+
-+static void tn7sar_init_dev_parm(void)
-+{
-+ int i;
-+
-+
-+ /* aal5 */
-+ //strcpy(aal5Parm.id, "aal5");
-+ aal5Parm.base = 0x03000000;
-+ aal5Parm.offset = 0;
-+ aal5Parm.int_line=15;
-+ aal5Parm.chan[0].RxBufSize=1600;
-+ aal5Parm.chan[0].RxNumBuffers = 32;
-+ aal5Parm.chan[0].RxServiceMax = 50;
-+ aal5Parm.chan[0].TxServiceMax=50;
-+ aal5Parm.chan[0].TxNumBuffers=32;
-+ aal5Parm.chan[0].CpcsUU=0x5aa5;
-+ aal5Parm.chan[0].TxVc_CellRate=0x3000;
-+ aal5Parm.chan[0].TxVc_AtmHeader=0x00000640;
-+ for(i=1;i<8;i++)
-+ {
-+ memcpy(&aal5Parm.chan[i], &aal5Parm.chan[0], sizeof(aal5Parm.chan[0]));
-+ }
-+
-+
-+ /* sar */
-+ //strcpy(sarParm.id, "sar");
-+ sarParm.base = 0x03000000;
-+ sarParm.reset_bit = 9;
-+ sarParm.offset = 0;
-+ sarParm.UniNni = 0;
-+
-+ pAal5 = aal5Data;
-+ pSar = sarData;
-+ pReset = resetData;
-+ strcpy(pAal5, AAL5_PARM);
-+ strcpy(pSar, SAR_PARM);
-+ strcpy(pReset, RESET_PARM);
-+
-+}
-+
-+
-+int tn7sar_get_stats(void *priv1)
-+{
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+ Tn7AtmPrivate *priv;
-+ int i, j;
-+ unsigned int *pSarStat, *pStateBase;
-+ char statString[64];
-+ int len;
-+
-+ dprintf(2, "tn7sar_get_stats\n");
-+
-+ priv = (Tn7AtmPrivate *)priv1;
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+ //memset(&sarStat, 0, sizeof(sarStat));
-+ sarStat.txErrors = 0;
-+ sarStat.rxErrors = 0;
-+ for(i=0;i<MAX_DMA_CHAN;i++)
-+ {
-+ if(priv->lut[i].inuse)
-+ {
-+ for(j=0;j<1;j++)
-+ {
-+ len=sprintf(statString, "Stats;0;%d", priv->lut[i].chanid);
-+ statString[len]=0;
-+ dprintf(2, "statString=%s\n",statString);
-+ pHalFunc->Control(pHalDev, statString, "Get", &pSarStat);
-+ pStateBase = pSarStat;
-+ while(pSarStat)
-+ {
-+ if((char *)*pSarStat == NULL)
-+ break;
-+ dprintf(2, "%s\n", (char *) *pSarStat);
-+ pSarStat++;
-+ dprintf(2, "%s\n", (char *) *pSarStat);
-+ sarStat.rxErrors += os_atoul((char *) *pSarStat);
-+ pSarStat++;
-+ }
-+
-+ kfree(pStateBase);
-+ }
-+ }
-+ }
-+ return 0;
-+}
-+
-+int tn7sar_setup_oam_channel(Tn7AtmPrivate *priv)
-+{
-+
-+ CHANNEL_INFO chInfo;
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+ int chan=15;
-+ dprintf(4, "tn7sar_setup_oam_channel\n");
-+
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+ memset(&chInfo, 0xff, sizeof(chInfo));
-+
-+ /* channel specific */
-+ chInfo.Channel = 15; /* hardcoded for last channel */
-+ chInfo.Direction = 0;
-+ chInfo.Vci = 30; /* just need below 32 */
-+ chInfo.Vpi = 0;
-+ chInfo.TxVc_QosType = 2;
-+
-+ /*default */
-+ chInfo.PktType = PACKET_TYPE_TRANS;
-+ chInfo.TxServiceMax = 2;
-+ chInfo.RxServiceMax = 2;
-+ chInfo.TxNumQueues = 1;
-+ chInfo.TxNumBuffers = 4;
-+ chInfo.RxNumBuffers = 4;
-+ chInfo.RxBufSize = 256;
-+ chInfo.RxVc_OamToHost = 0;
-+ chInfo.RxVp_OamToHost = 0;
-+ chInfo.FwdUnkVc = 1; //enable forwarding of unknown vc
-+ chInfo.TxVc_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, chInfo.Vci);
-+ chInfo.RxVc_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, chInfo.Vci);
-+ chInfo.TxVp_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, 0);
-+ chInfo.RxVp_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, 0);
-+
-+ dprintf(4, "TxVc_AtmHeader=0x%x\n", chInfo.TxVc_AtmHeader);
-+
-+ if(pHalFunc->ChannelSetup(pHalDev, &chInfo, NULL))
-+ {
-+ printk("failed to setup channel =%d.\n", chan);
-+ return -1;
-+ }
-+
-+ // claiming the channel
-+ priv->lut[chan].vpi = 0;
-+ priv->lut[chan].vci = 30;
-+ priv->lut[chan].chanid = chan;
-+ priv->lut[chan].inuse = 1;
-+ return 0;
-+}
-+
-+int tn7sar_init(struct atm_dev *dev, Tn7AtmPrivate *priv)
-+{
-+ int retCode;
-+ int hal_funcs_size;
-+
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+ OS_FUNCTIONS *pOsFunc;
-+ int oamMod;
-+ char *pLbTimeout;
-+ int lbTimeout;
-+
-+
-+ dprintf(4, "tn7sar_init\n");
-+
-+ pOsFunc = (OS_FUNCTIONS *)kmalloc(sizeof(OS_FUNCTIONS), GFP_KERNEL);
-+
-+
-+ priv->pSarOsFunc = ( void *)pOsFunc;
-+
-+ /* init boot parms */
-+ tn7sar_init_dev_parm();
-+
-+ /* init sar os call back functions */
-+ retCode = tn7sar_init_module(pOsFunc);
-+ if (retCode != 0) /* error */
-+ {
-+ printk("Failed to init SAR OS Functions\n");
-+ return (1);
-+ }
-+
-+ /* Init sar hal */
-+ retCode = cpaal5InitModule(&pHalDev, (OS_DEVICE*) dev, &pHalFunc,
-+ pOsFunc, sizeof(OS_FUNCTIONS), &hal_funcs_size, 0);
-+ if (retCode != 0) /* error */
-+ {
-+ printk("Failed to init SAR HAL\n");
-+ return (1);
-+ }
-+
-+ /* sanity check */
-+ if (pHalDev == NULL || pHalFunc == NULL || hal_funcs_size != sizeof(HAL_FUNCTIONS) )
-+ {
-+ printk("Invalid SAR hal and/or functions.\n");
-+ return (1);
-+ }
-+
-+ /* remeber HAL pointers */
-+ priv->pSarHalDev = (void *)pHalDev;
-+ priv->pSarHalFunc = (void *)pHalFunc;
-+
-+ /* Probe for the Device to get hardware info from driver */
-+ retCode = pHalFunc->Probe(pHalDev);
-+ if (retCode !=0)
-+ {
-+ printk("SAR hal probing error.\n");
-+ return (1);
-+ }
-+
-+ /* init sar hal */
-+ retCode = pHalFunc->Init(pHalDev);
-+ if (retCode != 0) /* error */
-+ {
-+
-+ printk("pHalFunc->Init failed. err code =%d\n", retCode);
-+ return (1);
-+ }
-+
-+ /* open hal module */
-+ retCode = pHalFunc->Open(pHalDev);
-+ if (retCode != 0) /* error */
-+ {
-+ printk("pHalFunc->open failed, err code: %d\n",retCode );
-+ return (1);
-+ }
-+
-+ /* init sar for firmware oam */
-+ oamMod= 1;
-+ pHalFunc->Control(pHalDev,"OamMode", "Set", &oamMod);
-+
-+ /* read in oam lb timeout value */
-+ pLbTimeout = prom_getenv("oam_lb_timeout");
-+ if(pLbTimeout)
-+ {
-+ lbTimeout =tn7sar_strtoul(pLbTimeout, NULL, 10);
-+ oamLbTimeout = lbTimeout;
-+ pHalFunc->Control(pHalDev,"OamLbTimeout", "Set", &lbTimeout);
-+ }
-+ else
-+ {
-+ oamLbTimeout = 5000;
-+ }
-+
-+ oamFarLBCount[0]=0;
-+ oamFarLBCount[1]=0;
-+ oamFarLBCount[2]=0;
-+ oamFarLBCount[3]=0;
-+
-+ memset(&sarStat, 0 , sizeof(sarStat));
-+
-+ /* setup channel 15 for oam operation */
-+ tn7sar_setup_oam_channel(priv);
-+ dprintf(4, "tn7sar_init done");
-+ return 0;
-+}
-+
-+static int
-+tn7sar_atm_header(int vpi, int vci)
-+{
-+ union
-+ {
-+ unsigned char byte[4];
-+ unsigned int dword;
-+ }atm_h;
-+ int itmp = 0;
-+
-+ //vci
-+ itmp = vci &0xf;
-+ atm_h.byte[0] = 0;
-+ atm_h.byte[0] |= (itmp << 4);
-+ atm_h.byte[1] = ((vci & 0xff0) >> 4);
-+ atm_h.byte[2] = 0;
-+ atm_h.byte[2] |= ((vci & 0xf000) >>12);;
-+ atm_h.byte[2] |= ((vpi & 0xf) << 4);
-+ atm_h.byte[3] = 0;
-+ atm_h.byte[3] = ((vpi & 0xff0) >> 4);
-+ return atm_h.dword;
-+}
-+
-+int tn7sar_activate_vc(Tn7AtmPrivate *priv, short vpi, int vci, int pcr, int scr, int mbs, int cdvt, int chan, int qos)
-+{
-+ CHANNEL_INFO chInfo;
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+
-+ dprintf(4, "tn7sar_activate_vc\n");
-+
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+ memset(&chInfo, 0xff, sizeof(chInfo));
-+
-+ /* channel specific */
-+ chInfo.Channel = chan;
-+ chInfo.Direction = 0;
-+ chInfo.Vci = vci;
-+ chInfo.Vpi = vpi;
-+ chInfo.TxVc_QosType = qos;
-+ chInfo.Priority = qos;
-+
-+ if(chInfo.TxVc_QosType == 1) /* if the connection is VBR than set the DaMask value to tell the schedular to accumalte the credit */
-+ {
-+ chInfo.DaMask = 1;
-+ }
-+ chInfo.TxVc_Mbs = mbs; /* use pcr as MBS */
-+ pcr = SAR_FREQUNCY/pcr;
-+ scr = SAR_FREQUNCY/scr;
-+ chInfo.TxVc_CellRate = scr;
-+ chInfo.TxVc_Pcr = pcr;
-+
-+ /*default */
-+ chInfo.PktType = PACKET_TYPE_AAL5;
-+ chInfo.TxServiceMax = TX_SERVICE_MAX;
-+ chInfo.RxServiceMax = RX_SERVICE_MAX;
-+ chInfo.TxNumQueues = TX_QUEUE_NUM;
-+ chInfo.TxNumBuffers = TX_BUFFER_NUM;
-+ chInfo.RxNumBuffers = RX_BUFFER_NUM;
-+ chInfo.RxBufSize = RX_BUFFER_SIZE;
-+ chInfo.RxVc_OamToHost = 0;
-+ chInfo.RxVp_OamToHost = 0;
-+ chInfo.TxVc_AtmHeader = tn7sar_atm_header((int)vpi, vci);
-+ chInfo.RxVc_AtmHeader = tn7sar_atm_header((int)vpi, vci);
-+ chInfo.TxVp_AtmHeader = tn7sar_atm_header((int)vpi, 0);
-+ chInfo.RxVp_AtmHeader = tn7sar_atm_header((int)vpi, 0);
-+ chInfo.CpcsUU = 0;
-+
-+ dprintf(4, "TxVc_AtmHeader=0x%x\n", chInfo.TxVc_AtmHeader);
-+
-+ if(pHalFunc->ChannelSetup(pHalDev, &chInfo, NULL))
-+ {
-+ printk("failed to setup channel =%d.\n", chan);
-+ return -1;
-+ }
-+
-+
-+ return 0;
-+}
-+
-+int tn7sar_send_packet(Tn7AtmPrivate *priv, int chan, void *new_skb, void *data,unsigned int len, int priority)
-+{
-+ FRAGLIST fragList;
-+ unsigned int mode;
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+
-+ dprintf(4, "tn7sar_send_packet\n");
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+ fragList.len = len;
-+ fragList.data = (void *)data;
-+
-+ xdump((char *)fragList.data , fragList.len, 6);
-+
-+ /*mode bit
-+ 31-19 unused
-+ 18 oam cell, 1 = true, 0=false
-+ 17-16 oam type, 0=F4 seg, 1=F4 End, 2=F5 seg, 3=F5 end
-+ 15-08 transimit queue, current, 0=priority queue, 1=normal queue
-+ 07-00 channel number
-+ */
-+ mode = 0;
-+ mode |= (0xff & chan);
-+ mode |= ((0xff & priority) << 8);
-+
-+ dprintf(4, "mode = %d\n", mode);
-+
-+ tn7sar_data_writeback(fragList.data, len);
-+ if(pHalFunc->Send(pHalDev, &fragList, 1, len, new_skb, mode) != 0)
-+ {
-+ dprintf(1, "SAR hal failed to send packet.\n");
-+ return 1;
-+ }
-+ //tn7sar_get_stats(priv);
-+ sarStat.txPktCnt++;
-+ sarStat.txBytes +=len;
-+ return 0;
-+}
-+
-+
-+
-+int tn7sar_handle_interrupt(struct atm_dev *dev, Tn7AtmPrivate *priv)
-+{
-+ int more;
-+ int rc;
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+ int (*halIsr)(HAL_DEVICE *halDev, int *work);
-+
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+ halIsr = priv->halIsr;
-+
-+ rc = halIsr(pHalDev, &more);
-+
-+ pHalFunc->PacketProcessEnd(pHalDev);
-+
-+ return rc;
-+}
-+
-+
-+int tn7sar_deactivate_vc(Tn7AtmPrivate *priv, int chan)
-+{
-+ unsigned int mode;
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+
-+ dprintf(4, "tn7sar_deactivate_vc\n");
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+ mode = 0xf; //tear down everything, wait for return;
-+
-+ pHalFunc->ChannelTeardown(pHalDev, chan, mode);
-+ return 0;
-+}
-+
-+void tn7sar_exit(struct atm_dev *dev, Tn7AtmPrivate *priv)
-+{
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+
-+ dprintf(4, "tn7sar_exit()\n");
-+
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+ tn7sar_deactivate_vc(priv, 15); // de-activate oam channel
-+
-+ pHalFunc->Close(pHalDev, 2);
-+ pHalFunc->Shutdown(pHalDev);
-+
-+ kfree(priv->pSarOsFunc);
-+
-+}
-+
-+void tn7sar_get_sar_version(Tn7AtmPrivate *priv, char **pVer)
-+{
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+
-+ dprintf(4, "tn7sar_get_sar_version()\n");
-+
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+ pHalFunc->Control(pHalDev, "Version", "Get", pVer);
-+}
-+
-+
-+int tn7sar_get_near_end_loopback_count(unsigned int *pF4count, unsigned int *pF5count)
-+{
-+ unsigned int f4c, f5c;
-+
-+ f4c = *(volatile unsigned int *)SAR_PDSP_OAM_F4LB_COUNT_REG_ADDR;
-+ f5c = *(volatile unsigned int *)SAR_PDSP_OAM_F5LB_COUNT_REG_ADDR;
-+ *pF4count = f4c;
-+ *pF5count = f5c;
-+
-+ return 0;
-+}
-+
-+
-+int tn7sar_unmatched_oam_generation(void *privContext, int vpi, int vci, int type)
-+{
-+
-+ unsigned int regv = 0;
-+ int chan=15;
-+ static unsigned int tag;
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+ Tn7AtmPrivate *priv;
-+ unsigned int llid[4]={0xffffffff,0xffffffff,0xffffffff,0xffffffff};
-+
-+ dprintf(4, "tn7sar_unknow_oam_generation()\n");
-+
-+ priv = (Tn7AtmPrivate *)privContext;
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+ if(vci==0)
-+ {
-+ oamPingStatus = OAM_PING_FAILED;
-+ return 0;
-+ }
-+ /* calculate atm header */
-+ oamAtmHdr = tn7sar_atm_header(vpi,vci);
-+
-+ /* config the atm header */
-+ pHalFunc->Control(pHalDev,"TxVc_AtmHeader.15", "Set", &oamAtmHdr);
-+
-+ /*record oam type */
-+ oam_type = type;
-+
-+ regv = (0xff & chan);
-+
-+ switch(type)
-+ {
-+ case 0:
-+ regv |= (1<<12); //f5 end
-+ dprintf(2, "f5 loop back\n");
-+ break;
-+ case 1:
-+ regv |= (1<<13); // f4 end
-+ break;
-+ case 2:
-+ regv |= (1<<14); //f5 seg
-+ break;
-+ case 3:
-+ regv |= (1<<15); //f4 seg
-+ break;
-+ default:
-+ break;
-+ }
-+ oamPingStatus = OAM_PING_PENDING;
-+ pHalFunc->OamLoopbackConfig(pHalDev, regv, llid, tag);
-+ tag++;
-+ return 0;
-+
-+}
-+
-+int tn7sar_oam_generation(void *privContext, int chan, int type, int vpi, int vci, int timeout)
-+{
-+ unsigned int regv = 0;
-+ static unsigned int tag;
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+ Tn7AtmPrivate *priv;
-+ unsigned int llid[4]={0xffffffff,0xffffffff,0xffffffff,0xffffffff};
-+
-+ dprintf(2, "tn7sar_oam_generation()\n");
-+
-+ priv = (Tn7AtmPrivate *)privContext;
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+ if(timeout >= 5000)
-+ {
-+ if(timeout == 6000)
-+ {
-+ tn7sar_clear_pvc_table();
-+ return 0;
-+ }
-+ timeout = oamLbTimeout;
-+ }
-+
-+
-+ pHalFunc->Control(pHalDev,"OamLbTimeout", "Set", &timeout);
-+
-+ if(chan == ATM_NO_DMA_CHAN)
-+ {
-+ tn7sar_unmatched_oam_generation(priv, vpi, vci, type);
-+ return 0;
-+ }
-+
-+ /* calculate atm header */
-+ oamAtmHdr = tn7sar_atm_header(vpi,vci);
-+
-+ oam_type = type;
-+
-+ regv = (0xff & chan);
-+ switch(type)
-+ {
-+ case 0:
-+ regv |= (1<<12); //f5 end
-+ dprintf(2, "f5 loop back\n");
-+ break;
-+ case 1:
-+ regv |= (1<<13); // f4 end
-+ break;
-+ case 2:
-+ regv |= (1<<14); //f5 seg
-+ break;
-+ case 3:
-+ regv |= (1<<15); //f4 seg
-+ break;
-+ default:
-+ break;
-+ }
-+ oamPingStatus = OAM_PING_PENDING;
-+ pHalFunc->OamLoopbackConfig(pHalDev, regv, llid, tag);
-+ tag++;
-+
-+ return 0;
-+}
-+
-+int tn7sar_proc_oam_ping(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+ int len = 0;
-+
-+ len += sprintf(buf+len, "%d\n", oamPingStatus);
-+
-+ return len;
-+}
-+
-+int tn7sar_proc_pvc_table(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+ int len = 0;
-+ int i;
-+
-+ for(i=0;i<16;i++)
-+ {
-+ if(pvc_result[i].bInUse)
-+ {
-+ len += sprintf(buf+len, "%d,%d\n", pvc_result[i].vpi,pvc_result[i].vci);
-+ }
-+ else
-+ {
-+ len += sprintf(buf+len, "0,0\n");
-+ }
-+ }
-+ return len;
-+}
-+
-+
-+
-+int tn7sar_proc_sar_stat(char* buf, char **start, off_t offset, int count,int *eof, void *data)
-+{
-+ int len = 0;
-+ int limit = count - 80;
-+ struct atm_dev *dev;
-+ Tn7AtmPrivate *priv;
-+ int i, j, k;
-+ int stat_len;
-+ char statString[32];
-+ unsigned int *pStateBase, *pSarStat;
-+ HAL_FUNCTIONS *pHalFunc;
-+ HAL_DEVICE *pHalDev;
-+ int dBytes;
-+
-+ dev = (struct atm_dev *)data;
-+ priv = (Tn7AtmPrivate *)dev->dev_data;
-+
-+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc;
-+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev;
-+
-+ len += sprintf(buf+len, "SAR HAL Statistics\n");
-+ for(i=0;i<MAX_DMA_CHAN;i++)
-+ {
-+ if(priv->lut[i].inuse)
-+ {
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\nChannel %d:\n",priv->lut[i].chanid);
-+ k=0;
-+ for(j=0;j<4;j++)
-+ {
-+ stat_len =sprintf(statString, "Stats;%d;%d", j,priv->lut[i].chanid);
-+ statString[stat_len]=0;
-+ pHalFunc->Control(pHalDev, statString, "Get", &pSarStat);
-+ pStateBase = pSarStat;
-+ while(pSarStat)
-+ {
-+ if((char *)*pSarStat == NULL)
-+ break;
-+ if(len<=limit)
-+ {
-+ dBytes = sprintf(buf+len, "%s: ",(char *) *pSarStat);
-+ len += dBytes;
-+ k += dBytes;
-+ }
-+ pSarStat++;
-+ if(len<=limit)
-+ {
-+ dBytes = sprintf(buf+len, "%s; ",(char *) *pSarStat);
-+ len += dBytes;
-+ k += dBytes;
-+ }
-+ pSarStat++;
-+
-+ if(k > 60)
-+ {
-+ k=0;
-+ if(len<=limit)
-+ len += sprintf(buf+len, "\n");
-+ }
-+ }
-+
-+ kfree(pStateBase);
-+ }
-+ }
-+ }
-+
-+ return len;
-+}
-+
-+void tn7sar_get_sar_firmware_version(unsigned int *pdsp_version_ms, unsigned int *pdsp_version_ls)
-+{
-+
-+ *pdsp_version_ms = (SarPdspFirmware[9]>>20) & 0xF;
-+ *pdsp_version_ls = (SarPdspFirmware[9]>>12) & 0xFF;
-+ return;
-+}
-diff -urN linux.old/drivers/atm/sangam_atm/tnetd7300_sar_firm.h linux.dev/drivers/atm/sangam_atm/tnetd7300_sar_firm.h
---- linux.old/drivers/atm/sangam_atm/tnetd7300_sar_firm.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/tnetd7300_sar_firm.h 2005-08-23 04:46:50.111841568 +0200
-@@ -0,0 +1,988 @@
-+//SarPdspFirmware Revision: 49
-+
-+static int SarPdspFirmware[] = {
-+ 0xb0a8d1f1,
-+ 0x000003d8,
-+ 0x00000000,
-+ 0x00000004,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x00000000,
-+ 0x21000900,
-+ 0x24049080,
-+ 0x24000080,
-+ 0x240000c0,
-+ 0x10e0e0e1,
-+ 0x10e0e0e2,
-+ 0x10e0e0e3,
-+ 0x10e0e0e4,
-+ 0x10e0e0e5,
-+ 0x10e0e0e6,
-+ 0x10e0e0e7,
-+ 0x10e0e0e8,
-+ 0x10e0e0e9,
-+ 0x10e0e0ea,
-+ 0x10e0e0eb,
-+ 0x10e0e0ec,
-+ 0x10e0e0ed,
-+ 0x10e0e0ee,
-+ 0x10e0e0ef,
-+ 0x10e0e0f0,
-+ 0x10e0e0f1,
-+ 0x10e0e0f2,
-+ 0x10e0e0f3,
-+ 0x10e0e0f4,
-+ 0x10e0e0f5,
-+ 0x10e0e0f6,
-+ 0x10e0e0f7,
-+ 0x10e0e0f8,
-+ 0x10e0e0f9,
-+ 0x10e0e0fa,
-+ 0x10e0e0fb,
-+ 0x10e0e0fc,
-+ 0x10e0e0fd,
-+ 0x10e0e0fe,
-+ 0x10e0e0ff,
-+ 0x81042680,
-+ 0x810c2680,
-+ 0x81042680,
-+ 0x2483c080,
-+ 0x81180b80,
-+ 0x2484c080,
-+ 0x811a0b80,
-+ 0x2485c080,
-+ 0x811c0b80,
-+ 0x240100dd,
-+ 0xa07d06fd,
-+ 0x240400dd,
-+ 0xa07d04fd,
-+ 0x24c000dd,
-+ 0x2400169d,
-+ 0xa07d5cfd,
-+ 0x511f9d03,
-+ 0x01019d9d,
-+ 0x7f0000fd,
-+ 0xd11eff05,
-+ 0x97c06890,
-+ 0x1d00e5e5,
-+ 0x2301229e,
-+ 0x81bc2890,
-+ 0x24000000,
-+ 0xc917ff02,
-+ 0x81000100,
-+ 0x01010000,
-+ 0xc918ff02,
-+ 0x81000100,
-+ 0x01010000,
-+ 0xc919ff02,
-+ 0x81000100,
-+ 0xd110e70a,
-+ 0xd11cff09,
-+ 0x1d00e5e5,
-+ 0xd100e704,
-+ 0xd114ff06,
-+ 0x2301179e,
-+ 0x79000004,
-+ 0xd70ffffd,
-+ 0x91382486,
-+ 0x2301059e,
-+ 0xc903ff07,
-+ 0xa06047e0,
-+ 0xb10043e6,
-+ 0xc910e602,
-+ 0x81000106,
-+ 0x24006025,
-+ 0x2300d39e,
-+ 0xd11dff09,
-+ 0x1f00e5e5,
-+ 0xc901e705,
-+ 0xd111ff06,
-+ 0x91382586,
-+ 0x2301059e,
-+ 0x79000003,
-+ 0xd715fffc,
-+ 0x2301179e,
-+ 0xc910e706,
-+ 0x110f2760,
-+ 0x240000c6,
-+ 0x24000086,
-+ 0x13106006,
-+ 0x7b00005a,
-+ 0x11079f80,
-+ 0x51008010,
-+ 0xc912ff0f,
-+ 0xd100ff04,
-+ 0xd101ff05,
-+ 0xa06046e0,
-+ 0x79000004,
-+ 0xa06044e0,
-+ 0x79000002,
-+ 0xa06045e0,
-+ 0xb10043e6,
-+ 0x61150602,
-+ 0x2101c500,
-+ 0xc910e602,
-+ 0xa1001006,
-+ 0x24000025,
-+ 0x2300d39e,
-+ 0xd11fff05,
-+ 0x97c06a90,
-+ 0x1f00e5e5,
-+ 0x2301229e,
-+ 0x81bc2a90,
-+ 0xd11cff09,
-+ 0x1d00e5e5,
-+ 0xc900e705,
-+ 0xd10fff06,
-+ 0x91382486,
-+ 0x2301059e,
-+ 0x79000003,
-+ 0xd714fffc,
-+ 0x2301179e,
-+ 0xc907ff07,
-+ 0xa0604be0,
-+ 0xb10043e6,
-+ 0xc910e602,
-+ 0x81000106,
-+ 0x24006025,
-+ 0x2300d39e,
-+ 0xd111e70a,
-+ 0xd11dff09,
-+ 0x1f00e5e5,
-+ 0xd101e704,
-+ 0xd115ff06,
-+ 0x2301179e,
-+ 0x79000004,
-+ 0xd711fffd,
-+ 0x91382586,
-+ 0x2301059e,
-+ 0xc911e706,
-+ 0x0b042760,
-+ 0x240000c6,
-+ 0x24000086,
-+ 0x13106006,
-+ 0x7b000024,
-+ 0x11709f80,
-+ 0x5100800e,
-+ 0xc913ff0d,
-+ 0xd104ff04,
-+ 0xd105ff05,
-+ 0xa0604ae0,
-+ 0x79000004,
-+ 0xa06048e0,
-+ 0x79000002,
-+ 0xa06049e0,
-+ 0xb10043e6,
-+ 0xc910e602,
-+ 0xa1001106,
-+ 0x24000025,
-+ 0x2300d39e,
-+ 0xc90bff02,
-+ 0x7900000b,
-+ 0xc90aff02,
-+ 0x79000012,
-+ 0xcf08ff89,
-+ 0xb10002e0,
-+ 0xcf18e087,
-+ 0x790000b6,
-+ 0x24000080,
-+ 0x24fb00c0,
-+ 0xa06003e0,
-+ 0x7f000082,
-+ 0xb10024e6,
-+ 0xb10025e0,
-+ 0xa06628e6,
-+ 0xa06029e0,
-+ 0x248000c6,
-+ 0xa06624e6,
-+ 0x671006f0,
-+ 0x81082186,
-+ 0x7f0000ee,
-+ 0xb10027e6,
-+ 0x61100604,
-+ 0xa0662be6,
-+ 0x810c2186,
-+ 0x79000006,
-+ 0xd70cffea,
-+ 0xa0662be6,
-+ 0x1f1be6e6,
-+ 0x81382686,
-+ 0x813c2680,
-+ 0x248000c6,
-+ 0xa06627e6,
-+ 0x7f0000e3,
-+ 0x110f0600,
-+ 0x81100b00,
-+ 0x01502545,
-+ 0x90457888,
-+ 0x5103091c,
-+ 0x6901092a,
-+ 0xc910e603,
-+ 0xd108e90d,
-+ 0x79000027,
-+ 0x01582545,
-+ 0x9045788a,
-+ 0xd108e904,
-+ 0x1f08e9e9,
-+ 0x01552545,
-+ 0x80451829,
-+ 0x50eaeb20,
-+ 0x0101ebeb,
-+ 0x015c2545,
-+ 0x8045388b,
-+ 0x7900001c,
-+ 0x015c2545,
-+ 0x9045788b,
-+ 0x6900eb05,
-+ 0x1d08e9e9,
-+ 0x01552545,
-+ 0x80451829,
-+ 0x79000004,
-+ 0x0501ebeb,
-+ 0x015c2545,
-+ 0x8045388b,
-+ 0x10ecece8,
-+ 0x79000010,
-+ 0x24000000,
-+ 0x5110000e,
-+ 0x690f6903,
-+ 0x24000069,
-+ 0x79000002,
-+ 0x01016969,
-+ 0x01010000,
-+ 0x81100b69,
-+ 0x01542545,
-+ 0x90451809,
-+ 0x6f0209f7,
-+ 0xa1001069,
-+ 0x81100b06,
-+ 0x01572545,
-+ 0x80451869,
-+ 0xa06841e8,
-+ 0xa1414006,
-+ 0x209e0000,
-+ 0x81100b06,
-+ 0xd11fe603,
-+ 0x9164388d,
-+ 0x8108248d,
-+ 0xd100e507,
-+ 0x97406490,
-+ 0x9108248d,
-+ 0x813c2480,
-+ 0x2302b4de,
-+ 0x1d00e7e7,
-+ 0x79000006,
-+ 0x97406590,
-+ 0x9108258d,
-+ 0x813c2580,
-+ 0x1d01e7e7,
-+ 0x2302b9de,
-+ 0x8164388d,
-+ 0x209e0000,
-+ 0x81040105,
-+ 0x91002286,
-+ 0x97086290,
-+ 0x81042280,
-+ 0xd100e504,
-+ 0x2302b4de,
-+ 0x1f00e7e7,
-+ 0x209e0000,
-+ 0x2302b9de,
-+ 0x1f01e7e7,
-+ 0x209e0000,
-+ 0xd109ff00,
-+ 0xa0702cf0,
-+ 0x79000001,
-+ 0xd109ff00,
-+ 0xb1002de6,
-+ 0xd11ee609,
-+ 0xb1000de0,
-+ 0xc91fe044,
-+ 0x24c338c6,
-+ 0x10000006,
-+ 0x81382686,
-+ 0x87406690,
-+ 0x813c2680,
-+ 0x7900003e,
-+ 0x110f0600,
-+ 0x81100b00,
-+ 0x24000045,
-+ 0x24000025,
-+ 0x61100603,
-+ 0x24006045,
-+ 0x24006025,
-+ 0x01704545,
-+ 0x90451888,
-+ 0x0b034600,
-+ 0x11070000,
-+ 0x69040004,
-+ 0xc916ff2c,
-+ 0x01019e9e,
-+ 0x7900002f,
-+ 0xc90cff04,
-+ 0x6f0200fd,
-+ 0xd308e8a1,
-+ 0x7f0000fb,
-+ 0x69020008,
-+ 0xd308e89e,
-+ 0xb1002fe6,
-+ 0x91b82880,
-+ 0xc91ce002,
-+ 0x1f1ce6e6,
-+ 0x10080806,
-+ 0x79000015,
-+ 0xb1002fe6,
-+ 0x69030003,
-+ 0x13c06666,
-+ 0x79000011,
-+ 0x91807809,
-+ 0xc910ea09,
-+ 0x81082689,
-+ 0x01018a8a,
-+ 0xc91ee60a,
-+ 0x1d10eaea,
-+ 0x240557c0,
-+ 0x60c08a07,
-+ 0x1f1de6e6,
-+ 0x79000005,
-+ 0x2400018a,
-+ 0x1f10eaea,
-+ 0x1f1fe6e6,
-+ 0xd71ee6f8,
-+ 0x51000002,
-+ 0x11c76666,
-+ 0x81382686,
-+ 0x87406690,
-+ 0x91082689,
-+ 0x813c2680,
-+ 0xb1002ee6,
-+ 0xd103e609,
-+ 0x81807809,
-+ 0xc908e807,
-+ 0x21039400,
-+ 0x81002386,
-+ 0x87086390,
-+ 0x81042380,
-+ 0xc908e802,
-+ 0x21039400,
-+ 0x209e0000,
-+ 0xb10008ef,
-+ 0x110f0f00,
-+ 0x81100b00,
-+ 0x24000025,
-+ 0x61100f02,
-+ 0x24005025,
-+ 0x01952545,
-+ 0x9045382e,
-+ 0xc91def03,
-+ 0x24000900,
-+ 0x2301c09e,
-+ 0xc91cef03,
-+ 0x24001900,
-+ 0x2301c09e,
-+ 0xc91bef03,
-+ 0x24000a00,
-+ 0x2301c09e,
-+ 0xc91aef03,
-+ 0x24001a00,
-+ 0x2301c09e,
-+ 0x8045382e,
-+ 0x01a82545,
-+ 0x9045388e,
-+ 0xc915ef03,
-+ 0x24000000,
-+ 0x2301c09e,
-+ 0xc914ef03,
-+ 0x24001000,
-+ 0x2301c09e,
-+ 0x8045388e,
-+ 0x61100f02,
-+ 0x24006025,
-+ 0x016d2545,
-+ 0x9045382e,
-+ 0xc919ef03,
-+ 0x24000900,
-+ 0x2301c09e,
-+ 0xc918ef03,
-+ 0x24001900,
-+ 0x2301c09e,
-+ 0xc917ef03,
-+ 0x24000a00,
-+ 0x2301c09e,
-+ 0xc916ef03,
-+ 0x24001a00,
-+ 0x2301c09e,
-+ 0x8045382e,
-+ 0x017c2545,
-+ 0x9045388e,
-+ 0xc913ef03,
-+ 0x24000000,
-+ 0x2301c09e,
-+ 0xc912ef03,
-+ 0x24001000,
-+ 0x2301c09e,
-+ 0x8045388e,
-+ 0xd11eef19,
-+ 0x11f02f00,
-+ 0x51000017,
-+ 0x24001520,
-+ 0x81140b20,
-+ 0x81b01a0f,
-+ 0x1f02e7e7,
-+ 0x24c000c0,
-+ 0x24001580,
-+ 0xa0605ce0,
-+ 0xc90fef04,
-+ 0x1d04e7e7,
-+ 0x1d05e7e7,
-+ 0x7900000c,
-+ 0xc90eef04,
-+ 0x1d04e7e7,
-+ 0x1f05e7e7,
-+ 0x79000008,
-+ 0xc90def04,
-+ 0x1f04e7e7,
-+ 0x1d05e7e7,
-+ 0x79000004,
-+ 0xc90cef03,
-+ 0x1f04e7e7,
-+ 0x1f05e7e7,
-+ 0x2100b900,
-+ 0xd11eef03,
-+ 0x1e00eeee,
-+ 0x209e0000,
-+ 0x1c00eeee,
-+ 0x209e0000,
-+ 0x110f0606,
-+ 0x81140b06,
-+ 0x13100606,
-+ 0x91b01a83,
-+ 0x24000025,
-+ 0x61100304,
-+ 0x24005025,
-+ 0xc905e702,
-+ 0x24006025,
-+ 0x110f0300,
-+ 0x81100b00,
-+ 0x81120b00,
-+ 0x51150611,
-+ 0x61100302,
-+ 0x24005025,
-+ 0x1d01e5e5,
-+ 0x51160639,
-+ 0x511a0650,
-+ 0x511c0657,
-+ 0x5118065e,
-+ 0x511e0685,
-+ 0x61100302,
-+ 0x24006025,
-+ 0x1f01e5e5,
-+ 0x51170634,
-+ 0x511b064b,
-+ 0x511d0652,
-+ 0x51190658,
-+ 0x511f067f,
-+ 0xc903e708,
-+ 0x1d03e7e7,
-+ 0x24000060,
-+ 0xa1000a60,
-+ 0x244000c0,
-+ 0x24001580,
-+ 0xa0605ce0,
-+ 0x21007d00,
-+ 0xcf02e7fc,
-+ 0x1d02e7e7,
-+ 0x1f03e7e7,
-+ 0xc904e703,
-+ 0x1f08e3e3,
-+ 0x79000002,
-+ 0x1d08e3e3,
-+ 0xc905e705,
-+ 0x01682545,
-+ 0x9045588d,
-+ 0x2302879e,
-+ 0x79000004,
-+ 0x01902545,
-+ 0x9045588d,
-+ 0x2302819e,
-+ 0x24001872,
-+ 0x24000152,
-+ 0xb10009e0,
-+ 0x108080d3,
-+ 0x10c0c092,
-+ 0x2400102c,
-+ 0x2302c8de,
-+ 0x91021c97,
-+ 0x91001cd8,
-+ 0x91061c98,
-+ 0x91041cd9,
-+ 0x910a1c99,
-+ 0x91081cda,
-+ 0x910e1c9a,
-+ 0x910c1cdb,
-+ 0x91261d9b,
-+ 0x91287d9c,
-+ 0x23028dde,
-+ 0x1f02e7e7,
-+ 0x1d03e7e7,
-+ 0x7d000070,
-+ 0x01902545,
-+ 0x9045798d,
-+ 0x79000003,
-+ 0x01682545,
-+ 0x9045788d,
-+ 0x0b09eee0,
-+ 0x24001472,
-+ 0xd108e303,
-+ 0xc900e00b,
-+ 0x79000002,
-+ 0xc910e009,
-+ 0xd101e503,
-+ 0x2302819e,
-+ 0x79000002,
-+ 0x2302879e,
-+ 0x91013d12,
-+ 0x9504bd93,
-+ 0x23028dde,
-+ 0x7d00005d,
-+ 0xd108ee03,
-+ 0x1d10e7e7,
-+ 0x7900009a,
-+ 0x1d11e7e7,
-+ 0x79000098,
-+ 0x01902545,
-+ 0x9045798d,
-+ 0x79000003,
-+ 0x01682545,
-+ 0x9045788d,
-+ 0x0b0aeee0,
-+ 0x24001072,
-+ 0x7f0000e8,
-+ 0x01a02545,
-+ 0x9045b98d,
-+ 0x79000003,
-+ 0x01742545,
-+ 0x9045b88d,
-+ 0x0b01efe0,
-+ 0x24001172,
-+ 0x7f0000e0,
-+ 0x2302d1de,
-+ 0x79000002,
-+ 0x2302d6de,
-+ 0x000c2545,
-+ 0x9045198f,
-+ 0xd100ef07,
-+ 0x1d02efef,
-+ 0xc901ef0c,
-+ 0xc905ef0b,
-+ 0x1d01efef,
-+ 0x1d05efef,
-+ 0x79000008,
-+ 0xd102ef04,
-+ 0x1f02efef,
-+ 0x8045198f,
-+ 0x79000078,
-+ 0xd101ef04,
-+ 0x1f01efef,
-+ 0x1f05efef,
-+ 0x8045198f,
-+ 0x69180673,
-+ 0x01ac2545,
-+ 0x2302dbde,
-+ 0xd100ef03,
-+ 0x23036c9e,
-+ 0x7900006e,
-+ 0xc800e40b,
-+ 0x110f0020,
-+ 0x81100b20,
-+ 0x100c0c45,
-+ 0x61100002,
-+ 0x01604545,
-+ 0x9045188f,
-+ 0xd101ef04,
-+ 0x1f01efef,
-+ 0x1f07efef,
-+ 0x8045188f,
-+ 0x01010000,
-+ 0x6f1300f4,
-+ 0x79000060,
-+ 0x2302d1de,
-+ 0x79000002,
-+ 0x2302d6de,
-+ 0x000c2545,
-+ 0x9045198f,
-+ 0xc903ef05,
-+ 0x1d03efef,
-+ 0x1f04efef,
-+ 0x8045198f,
-+ 0x79000056,
-+ 0xc904ef55,
-+ 0x1d04efef,
-+ 0xc901ef04,
-+ 0xc906ef03,
-+ 0x1d01efef,
-+ 0x1d06efef,
-+ 0x8045198f,
-+ 0x691e064e,
-+ 0x01ac2545,
-+ 0x2302dbde,
-+ 0xc800e40c,
-+ 0x110f0020,
-+ 0x81100b20,
-+ 0x100c0c45,
-+ 0x61100002,
-+ 0x01604545,
-+ 0x9045188f,
-+ 0xc901ef05,
-+ 0xc908ef04,
-+ 0x1d01efef,
-+ 0x1d07efef,
-+ 0x8045188f,
-+ 0x01010000,
-+ 0x6f1300f3,
-+ 0x7900003d,
-+ 0x10ededf0,
-+ 0xc908e303,
-+ 0x13401010,
-+ 0x209e0000,
-+ 0x13301010,
-+ 0x209e0000,
-+ 0x10ededf0,
-+ 0xc908e303,
-+ 0x130a1010,
-+ 0x209e0000,
-+ 0x13081010,
-+ 0x209e0000,
-+ 0x24000266,
-+ 0x2400c800,
-+ 0x24000020,
-+ 0xd108ee17,
-+ 0x01012020,
-+ 0xc91cff09,
-+ 0x6e0020fe,
-+ 0xc910e702,
-+ 0x20de0000,
-+ 0x1f10e7e7,
-+ 0x110f0600,
-+ 0x11f02727,
-+ 0x12002727,
-+ 0x20de0000,
-+ 0x1d10e7e7,
-+ 0x2302b4de,
-+ 0x511d0605,
-+ 0x511c0602,
-+ 0x7900001e,
-+ 0x01a62545,
-+ 0x79000002,
-+ 0x01722545,
-+ 0x90451880,
-+ 0x01018080,
-+ 0x80451880,
-+ 0x79000017,
-+ 0x01012020,
-+ 0xc91dff09,
-+ 0x6e0020fe,
-+ 0xc911e702,
-+ 0x20de0000,
-+ 0x1f11e7e7,
-+ 0x09040600,
-+ 0x110f2727,
-+ 0x12002727,
-+ 0x20de0000,
-+ 0x1d11e7e7,
-+ 0x2302b9de,
-+ 0x7f0000ea,
-+ 0x81b82786,
-+ 0x240000d1,
-+ 0x87c06790,
-+ 0x81bc2780,
-+ 0x20de0000,
-+ 0x81b82986,
-+ 0x87c06990,
-+ 0x81bc2980,
-+ 0x20de0000,
-+ 0x91b43a88,
-+ 0x2301029e,
-+ 0x51150608,
-+ 0xc908e305,
-+ 0x51120303,
-+ 0x01010303,
-+ 0x79000002,
-+ 0x24000003,
-+ 0x01012323,
-+ 0x81b01a83,
-+ 0x21007d00,
-+ 0x902cfc88,
-+ 0x10c8c893,
-+ 0x108888d4,
-+ 0x10c9c994,
-+ 0x108989d5,
-+ 0x10caca95,
-+ 0x108a8ad6,
-+ 0x10cbcb96,
-+ 0x108b8bd7,
-+ 0xd108e303,
-+ 0x2400a80c,
-+ 0x20de0000,
-+ 0x2400aa0c,
-+ 0x20de0000,
-+ 0xd108e303,
-+ 0x24007c0c,
-+ 0x20de0000,
-+ 0x24007e0c,
-+ 0x20de0000,
-+ 0x24000000,
-+ 0x90453904,
-+ 0xd108e303,
-+ 0x24007c0c,
-+ 0x20de0000,
-+ 0x24007e0c,
-+ 0x20de0000,
-+ 0xb1002fe6,
-+ 0x91b82880,
-+ 0xc91ce002,
-+ 0x209e0000,
-+ 0xb1002ee6,
-+ 0x69187279,
-+ 0xd110f230,
-+ 0xc903e769,
-+ 0xc90be604,
-+ 0xc904e767,
-+ 0xd105e766,
-+ 0x7900000c,
-+ 0xc90ae604,
-+ 0xd104e763,
-+ 0xd105e762,
-+ 0x79000008,
-+ 0xc907e604,
-+ 0xc904e75f,
-+ 0xc905e75e,
-+ 0x79000004,
-+ 0xc906e65c,
-+ 0xd104e75b,
-+ 0xc905e75a,
-+ 0x91003c80,
-+ 0x6897c058,
-+ 0x68d88057,
-+ 0x91043c80,
-+ 0x6898c055,
-+ 0x68d98054,
-+ 0x91083c80,
-+ 0x6899c052,
-+ 0x68da8051,
-+ 0x910c3c80,
-+ 0x689ac04f,
-+ 0x68db804e,
-+ 0xb10009e0,
-+ 0x6892c04c,
-+ 0x68d3804b,
-+ 0x24000160,
-+ 0xa1000a60,
-+ 0x244000c0,
-+ 0x24001580,
-+ 0xa0605ce0,
-+ 0x1d03e7e7,
-+ 0x109393c8,
-+ 0x10d4d488,
-+ 0x109494c9,
-+ 0x10d5d589,
-+ 0x109595ca,
-+ 0x10d6d68a,
-+ 0x109696cb,
-+ 0x10d7d78b,
-+ 0x8110fc88,
-+ 0x209e0000,
-+ 0x91003c80,
-+ 0x6893c00c,
-+ 0x68d4800b,
-+ 0x91043c80,
-+ 0x6894c009,
-+ 0x68d58008,
-+ 0x91083c80,
-+ 0x6895c006,
-+ 0x68d68005,
-+ 0x910c3c80,
-+ 0x6896c003,
-+ 0x68d78002,
-+ 0x79000010,
-+ 0x24ffff80,
-+ 0x24ffffc0,
-+ 0x68809306,
-+ 0x68e0f405,
-+ 0x68e0f504,
-+ 0x68e0f603,
-+ 0x6880d702,
-+ 0x79000008,
-+ 0x24000080,
-+ 0x240000c0,
-+ 0x68809323,
-+ 0x68e0f422,
-+ 0x68e0f521,
-+ 0x68e0f620,
-+ 0x6880d71f,
-+ 0x1d10f2f2,
-+ 0x2400002c,
-+ 0x2302c8de,
-+ 0x24000f80,
-+ 0x240000c0,
-+ 0x0101c0c0,
-+ 0xd100e504,
-+ 0xc91cff06,
-+ 0x6e80c0fd,
-+ 0x21016d00,
-+ 0xc91dff03,
-+ 0x6e80c0fa,
-+ 0x21016d00,
-+ 0xd104e606,
-+ 0xc909e608,
-+ 0xb1000ce0,
-+ 0x0101e0e0,
-+ 0xa0600ce0,
-+ 0x79000004,
-+ 0xb1000be0,
-+ 0x0101e0e0,
-+ 0xa0600be0,
-+ 0xb1002fe6,
-+ 0xd100e504,
-+ 0x2302b4de,
-+ 0x24000022,
-+ 0x209e0000,
-+ 0x2302b9de,
-+ 0x24000042,
-+ 0x209e0000,
-+ 0xd104e609,
-+ 0x01782545,
-+ 0x9045180e,
-+ 0x110f0e00,
-+ 0x81100b00,
-+ 0x2400a445,
-+ 0x51002502,
-+ 0x01504545,
-+ 0x90451888,
-+ 0xc909e87d,
-+ 0xb1002fe6,
-+ 0x1f1fe6e6,
-+ 0x10080806,
-+ 0x21015f00,
-+ 0x6914721b,
-+ 0x01782545,
-+ 0x2303bade,
-+ 0x900c188f,
-+ 0x1d02efef,
-+ 0xc901ef05,
-+ 0xc905ef04,
-+ 0x1d01efef,
-+ 0x1d05efef,
-+ 0x800c188f,
-+ 0xc909e66e,
-+ 0x2303d0de,
-+ 0xc800e40c,
-+ 0x110f0020,
-+ 0x81100b20,
-+ 0x100c0c45,
-+ 0x61100002,
-+ 0x01604545,
-+ 0x9045188f,
-+ 0xc901ef05,
-+ 0xc907ef04,
-+ 0x1d01efef,
-+ 0x1d07efef,
-+ 0x8045188f,
-+ 0x01010000,
-+ 0x6f1300f3,
-+ 0x7900005e,
-+ 0x6910725d,
-+ 0x01782545,
-+ 0x2303bade,
-+ 0x900c188f,
-+ 0x1f03efef,
-+ 0xd101ef03,
-+ 0x1f01efef,
-+ 0x1f06efef,
-+ 0x800c188f,
-+ 0xc909e654,
-+ 0x2303d0de,
-+ 0xc800e40b,
-+ 0x110f0020,
-+ 0x81100b20,
-+ 0x100c0c45,
-+ 0x61100002,
-+ 0x01604545,
-+ 0x9045188f,
-+ 0xd101ef04,
-+ 0x1f01efef,
-+ 0x1f08efef,
-+ 0x8045188f,
-+ 0x01010000,
-+ 0x6f1300f4,
-+ 0x79000045,
-+ 0x01782545,
-+ 0x9045788e,
-+ 0x1d02efef,
-+ 0x1d12efef,
-+ 0xc905ef04,
-+ 0x1d05efef,
-+ 0x1d01efef,
-+ 0x7900000c,
-+ 0xc915ef04,
-+ 0x1d15efef,
-+ 0x1d11efef,
-+ 0x79000008,
-+ 0xc907ef04,
-+ 0x1d07efef,
-+ 0x1d01efef,
-+ 0x79000004,
-+ 0xc917ef03,
-+ 0x1d17efef,
-+ 0x1d11efef,
-+ 0x017c2545,
-+ 0x8045388f,
-+ 0x110f0e00,
-+ 0x81100b00,
-+ 0x2400a845,
-+ 0x51002502,
-+ 0x01504545,
-+ 0x9045388f,
-+ 0x1d02efef,
-+ 0x1d12efef,
-+ 0xc905ef04,
-+ 0x1d05efef,
-+ 0x1d01efef,
-+ 0x79000004,
-+ 0xc915ef03,
-+ 0x1d15efef,
-+ 0x1d11efef,
-+ 0x8045388f,
-+ 0x7900001f,
-+ 0xc909e60d,
-+ 0x9045180e,
-+ 0x110f0e00,
-+ 0x81100b00,
-+ 0xc90ae603,
-+ 0x2400a80c,
-+ 0x79000003,
-+ 0xc90be617,
-+ 0x2400aa0c,
-+ 0x51002503,
-+ 0x01500c0c,
-+ 0x24005025,
-+ 0x20de0000,
-+ 0xc904e611,
-+ 0xc906e603,
-+ 0x24007c0c,
-+ 0x79000003,
-+ 0xc907e60d,
-+ 0x24007e0c,
-+ 0x51002502,
-+ 0x01600c0c,
-+ 0x20de0000,
-+ 0x01ac2545,
-+ 0x24000000,
-+ 0x90453804,
-+ 0xd10be603,
-+ 0x24007c0c,
-+ 0x20de0000,
-+ 0x24007e0c,
-+ 0x20de0000,
-+ 0x209e0000};
-diff -urN linux.old/drivers/atm/sangam_atm/turbodsl.c linux.dev/drivers/atm/sangam_atm/turbodsl.c
---- linux.old/drivers/atm/sangam_atm/turbodsl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/atm/sangam_atm/turbodsl.c 2005-08-23 04:46:50.111841568 +0200
-@@ -0,0 +1,223 @@
-+
-+
-+/*
-+ *
-+ * Turbo DSL Implementaion
-+ *
-+ * Zhicheng Tang ztang@ti.com
-+ *
-+ * 2002 (c) Texas Instruments Inc.
-+ *
-+*/
-+
-+/* defines and variables */
-+#define RFC2684_BRIDGED_HDR_SIZE 10
-+unsigned char LLC_BRIDGED_HEADER_2684[RFC2684_BRIDGED_HDR_SIZE] =
-+ {0xAA, 0xAA, 0x03, 0x00, 0x80, 0xC2, 0x00, 0x07, 0x00, 0x00};
-+
-+#define RFC2684_ROUTED_HDR_SIZE 6
-+unsigned char LLC_ROUTED_HEADER_2684[6] ={0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00};
-+
-+unsigned long PPP_LLC_HEADER = 0xCF03FEFE;
-+
-+/* struct definition */
-+enum
-+{
-+ AAL5_ENCAP_PPP_LLC,
-+ AAL5_ENCAP_PPP_VCMUX,
-+ AAL5_ENCAP_RFC2684_LLC_BRIDGED,
-+ AAL5_ENCAP_RFC2684_LLC_ROUTED
-+};
-+
-+/* Etherent header */
-+typedef struct _turbodsl_ether_header
-+{
-+ unsigned char dst_mac_addr[6];
-+ unsigned char src_mac_addr[6];
-+ unsigned short ether_type;
-+} turbodsl_ether_header_t;
-+
-+
-+/* Ip header define */
-+typedef struct _turbodsl_ip_header
-+{
-+
-+ unsigned short vit;
-+ unsigned short total_length;
-+ unsigned short ip_id;
-+ unsigned char flag; /* bit 0 = 0, bit1 = don't fragment, bit2=more frag */
-+ unsigned char fragment_offset; /* offset include remaining 5 bits above, which make it 13 bits */
-+ unsigned char time_to_live;
-+ unsigned char protocol;
-+ unsigned short checksum;
-+ unsigned int src_ip;
-+ unsigned int dst_ip;
-+} turbodsl_ip_header_t;
-+
-+/* Arp packet define */
-+typedef struct _turbodsl_arp_header
-+{
-+ unsigned short hardware_type;
-+ unsigned short protocol_type;
-+ unsigned char h_len;
-+ unsigned char p_len;
-+ unsigned short operation ;
-+ unsigned char snd_hw_address[6];
-+ unsigned char snd_pt_address[4];
-+ unsigned char dst_hw_address[6];
-+ unsigned char dst_pt_address[4];
-+} turbodsl_arp_header_t;
-+
-+#define FIN_FLAG 1
-+#define SYN_FLAG 1<<1
-+#define RST_FLAG 1<<2
-+#define PSH_FLAG 1<<3
-+#define ACK_FLAG 1<<4
-+#define URG_FLAG 1<<5
-+
-+typedef struct _turbodsl_tcp_header
-+{
-+ unsigned short src_port;
-+ unsigned short dst_port;
-+ unsigned int seq_num;
-+ unsigned int ack_num;
-+ unsigned char offset; /* only bits 4-7 are for offset */
-+ unsigned char flags; /* bits: 0-FIN, 1-SYN, 2-RST, 3-PSH, 4-ACK, 5-URG */
-+ unsigned short windows;
-+ unsigned short checksum;
-+ unsigned short urgent_ptr;
-+} turbodsl_tcp_header_t;
-+
-+
-+
-+/***************************************************************************
-+ * Function: turbodsl_memory_compare
-+ * Descripation: Memory compare
-+ ****************************************************************************/
-+int turbodsl_memory_compare(unsigned char *pIn, unsigned char *pOut, unsigned int len)
-+ {
-+ int i;
-+
-+ for(i=0;i<(int)len; i++)
-+ {
-+ if(pIn[i] != pOut[i])
-+ return 0;
-+ }
-+ return 1;
-+ }
-+
-+/***************************************************************************
-+ * Function: turbodsl_check_aal5_encap_type
-+ * Descripation: Determine AAL5 Encapsulation type
-+ * Input:
-+ * unsigned char *pData, AAL5 Packet buffer pointer
-+ ****************************************************************************/
-+int turbodsl_check_aal5_encap_type(unsigned char *pData)
-+ {
-+
-+ if(turbodsl_memory_compare(pData, LLC_BRIDGED_HEADER_2684, 6))
-+ return AAL5_ENCAP_RFC2684_LLC_BRIDGED;
-+ if(turbodsl_memory_compare(pData, LLC_ROUTED_HEADER_2684, 6))
-+ return AAL5_ENCAP_RFC2684_LLC_ROUTED;
-+ if(turbodsl_memory_compare(pData, (unsigned char *)&PPP_LLC_HEADER, sizeof(PPP_LLC_HEADER)))
-+ return AAL5_ENCAP_PPP_LLC;
-+
-+ return AAL5_ENCAP_PPP_VCMUX;
-+ }
-+
-+/***************************************************************************
-+ * Function: turbodsl_check_priority_type
-+ * Descripation: Determine AAL5 Encapsulation type
-+ * Input:
-+ * unsigned char *pData, AAL5 Packet buffer pointer.
-+ * short vpi, VPI.
-+ * int vci, VCI
-+ ****************************************************************************/
-+int turbodsl_check_priority_type(unsigned char *pData)
-+ {
-+ int encap;
-+ unsigned char *pP;
-+ unsigned short etherType;
-+ turbodsl_ip_header_t *pIp;
-+ turbodsl_tcp_header_t *pTcp;
-+ unsigned short ip_length;
-+
-+ dprintf(2, "turbodsl_check_priority_type ==>\n");
-+
-+ encap = turbodsl_check_aal5_encap_type(pData);
-+ pP = pData;
-+
-+ switch(encap)
-+ {
-+ case AAL5_ENCAP_RFC2684_LLC_BRIDGED:
-+ pP += RFC2684_BRIDGED_HDR_SIZE; //skip off aal5 encap
-+ pP += 12; //skip of mac address
-+ etherType = *(unsigned short *)pP;
-+ if(etherType != 0x6488 && etherType != 0x0008)
-+ {
-+ //Not an IP packet
-+ return 1;
-+ }
-+
-+ pP +=2; //skip ether type
-+ if(etherType == 0x6488)
-+ {
-+ pP += 6;
-+ }
-+ break;
-+ case AAL5_ENCAP_RFC2684_LLC_ROUTED:
-+ pP += RFC2684_ROUTED_HDR_SIZE; //skip of encap
-+ pP += 2; //skip ether type
-+ break;
-+ case AAL5_ENCAP_PPP_LLC:
-+ pP += sizeof(PPP_LLC_HEADER);
-+ if(*pP == 0xff && *(pP+1) == 0x03) //ppp hdlc header
-+ pP += 2;
-+ break;
-+ case AAL5_ENCAP_PPP_VCMUX:
-+ if(*pP == 0xff && *(pP+1) == 0x03) //ppp hdlc header
-+ pP += 2;
-+ break;
-+ default:
-+ return 1;
-+ }
-+
-+ pIp = (turbodsl_ip_header_t *)pP;
-+ if(pIp->vit != 0x0045)
-+ {
-+ //Not a IP packet
-+ return 1;
-+ }
-+
-+ if(pIp->protocol != 0x06)
-+ {
-+ //not tcp packet
-+ return 1;
-+ }
-+
-+ pTcp = (turbodsl_tcp_header_t *)(pP + sizeof(turbodsl_ip_header_t));
-+
-+ ip_length = (pIp->total_length>>8) + (pIp->total_length<<8);
-+
-+ if((pTcp->flags & ACK_FLAG) && ip_length <=40)
-+ return 0;
-+
-+ return 1;
-+ }
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
diff -urN linux.old/include/linux/atmdev.h linux.dev/include/linux/atmdev.h
--- linux.old/include/linux/atmdev.h 2005-08-22 23:18:37.812526104 +0200
+++ linux.dev/include/linux/atmdev.h 2005-08-23 06:33:33.425389944 +0200
projects / openwrt.git / commitdiff