ar71xx: register rtl8366_smi device on the WNDR3700

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18695 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
index 5f95270..25b5fc0 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
@@ -18,6 +18,7 @@
 #include <linux/pci.h>
 #include <linux/ath9k_platform.h>
 #include <linux/delay.h>
+#include <linux/rtl8366_smi.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
@@ -34,6 +35,9 @@
 #define WNDR3700_GPIO_BTN_RESET                8
 #define WNDR3700_GPIO_BTN_WIFI         11
 
+#define WNDR3700_GPIO_RTL8366_SDA      5
+#define WNDR3700_GPIO_RTL8366_SCK      7
+
 #define WNDR3700_BUTTONS_POLL_INTERVAL    20
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -274,20 +278,34 @@ static struct gpio_button wndr3700_gpio_buttons[] __initdata = {
        }
 };
 
+static struct rtl8366_smi_platform_data wndr3700_rtl8366_smi_data = {
+       .gpio_sda        = WNDR3700_GPIO_RTL8366_SDA,
+       .gpio_sck        = WNDR3700_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wndr3700_rtl8366_smi_device = {
+       .name           = "rtl8366-smi",
+       .id             = -1,
+       .dev = {
+               .platform_data  = &wndr3700_rtl8366_smi_data,
+       }
+};
+
 static void __init wndr3700_setup(void)
 {
        u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
 
        ar71xx_set_mac_base(mac);
-       ar71xx_add_device_mdio(0x0);
 
        ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
+       ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth0_data.phy_mask = 0xf;
        ar71xx_eth0_data.speed = SPEED_1000;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
 
        ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
+       ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth1_data.phy_mask = 0x10;
 
@@ -306,6 +324,7 @@ static void __init wndr3700_setup(void)
                                      ARRAY_SIZE(wndr3700_gpio_buttons),
                                      wndr3700_gpio_buttons);
 
+       platform_device_register(&wndr3700_rtl8366_smi_device);
        wndr3700_pci_init();
 }