40 files changed:
-Index: linux-2.6.25.4/arch/mips/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/mips/Kconfig
-+++ linux-2.6.25.4/arch/mips/Kconfig
-@@ -18,6 +18,20 @@ choice
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -18,6 +18,20 @@
prompt "System type"
default SGI_IP22
prompt "System type"
default SGI_IP22
config MACH_ALCHEMY
bool "Alchemy processor based machines"
config MACH_ALCHEMY
bool "Alchemy processor based machines"
-@@ -683,6 +697,7 @@ config WR_PPMC
source "arch/mips/au1000/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/au1000/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/jazz/Kconfig"
-Index: linux-2.6.25.4/arch/mips/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/mips/Makefile
-+++ linux-2.6.25.4/arch/mips/Makefile
-@@ -174,6 +174,16 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -174,6 +174,16 @@
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
-Index: linux-2.6.25.4/include/asm-mips/bootinfo.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.25.4/include/asm-mips/bootinfo.h
+--- a/include/asm-mips/bootinfo.h
++++ b/include/asm-mips/bootinfo.h
@@ -94,6 +94,58 @@
#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
@@ -94,6 +94,58 @@
#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
-Index: linux-2.6.25.4/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.25.4/drivers/mtd/maps/Kconfig
-@@ -590,5 +590,9 @@ config MTD_PLATRAM
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -590,5 +590,9 @@
This selection automatically selects the map_ram driver.
This selection automatically selects the map_ram driver.
-Index: linux-2.6.25.4/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.25.4/drivers/mtd/maps/Makefile
-@@ -44,6 +44,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -44,6 +44,7 @@
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
-Index: linux-2.6.25.4/drivers/net/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/Kconfig
-+++ linux-2.6.25.4/drivers/net/Kconfig
-@@ -606,6 +606,10 @@ config MIPS_AU1X00_ENET
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -606,6 +606,10 @@
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
-Index: linux-2.6.25.4/drivers/net/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/Makefile
-+++ linux-2.6.25.4/drivers/net/Makefile
-@@ -187,6 +187,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -187,6 +187,7 @@
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
-Index: linux-2.6.25.4/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.25.4/drivers/usb/host/Kconfig
-@@ -260,3 +260,6 @@ config USB_R8A66597_HCD
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -260,3 +260,6 @@
To compile this driver as a module, choose M here: the
module will be called r8a66597-hcd.
+config USB_ADM5120_HCD
+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
+ depends on USB && MIPS_ADM5120 && EXPERIMENTAL
To compile this driver as a module, choose M here: the
module will be called r8a66597-hcd.
+config USB_ADM5120_HCD
+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
+ depends on USB && MIPS_ADM5120 && EXPERIMENTAL
-Index: linux-2.6.25.4/drivers/usb/host/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/Makefile
-+++ linux-2.6.25.4/drivers/usb/host/Makefile
-@@ -8,6 +8,7 @@ endif
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -8,6 +8,7 @@
obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
-Index: linux-2.6.25.4/drivers/usb/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/Makefile
-+++ linux-2.6.25.4/drivers/usb/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -16,6 +16,7 @@
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
-Index: linux-2.6.25.4/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Kconfig
-+++ linux-2.6.25.4/drivers/leds/Kconfig
-@@ -25,6 +25,21 @@ config LEDS_ATMEL_PWM
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -25,6 +25,21 @@
This option enables support for LEDs driven using outputs
of the dedicated PWM controller found on newer Atmel SOCs.
This option enables support for LEDs driven using outputs
of the dedicated PWM controller found on newer Atmel SOCs.
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
depends on LEDS_CLASS && PXA_SHARP_C7xx
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.25.4/drivers/leds/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Makefile
-+++ linux-2.6.25.4/drivers/leds/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -5,6 +5,7 @@
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
-Index: linux-2.6.25.4/arch/mips/pci/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/mips/pci/Makefile
-+++ linux-2.6.25.4/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -48,3 +48,4 @@
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o
-Index: linux-2.6.25.4/include/linux/pci_ids.h
-===================================================================
---- linux-2.6.25.4.orig/include/linux/pci_ids.h
-+++ linux-2.6.25.4/include/linux/pci_ids.h
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
@@ -1704,6 +1704,9 @@
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
@@ -1704,6 +1704,9 @@
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-Index: linux-2.6.25.4/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Kconfig
-+++ linux-2.6.25.4/drivers/leds/Kconfig
-@@ -213,4 +213,12 @@ config LEDS_TRIGGER_DEFAULT_ON
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -213,4 +213,12 @@
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
+ If unsure, say N.
+
endif # NEW_LEDS
+ If unsure, say N.
+
endif # NEW_LEDS
-Index: linux-2.6.25.4/drivers/leds/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Makefile
-+++ linux-2.6.25.4/drivers/leds/Makefile
-@@ -30,3 +30,4 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += l
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -30,3 +30,4 @@
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
-Index: linux-2.6.25.4/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/Kconfig
-+++ linux-2.6.25.4/drivers/mtd/Kconfig
-@@ -168,6 +168,22 @@ config MTD_OF_PARTS
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -168,6 +168,22 @@
the partition map from the children of the flash node,
as described in Documentation/powerpc/booting-without-of.txt.
the partition map from the children of the flash node,
as described in Documentation/powerpc/booting-without-of.txt.
comment "User Modules And Translation Layers"
config MTD_CHAR
comment "User Modules And Translation Layers"
config MTD_CHAR
-Index: linux-2.6.25.4/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/Makefile
-+++ linux-2.6.25.4/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
-Index: linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -47,12 +47,19 @@
#define MANUFACTURER_AMD 0x0001
#define MANUFACTURER_ATMEL 0x001F
@@ -47,12 +47,19 @@
#define MANUFACTURER_AMD 0x0001
#define MANUFACTURER_ATMEL 0x001F
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -221,6 +228,41 @@ static void fixup_use_atmel_lock(struct
mtd->flags |= MTD_POWERUP_LOCK;
}
mtd->flags |= MTD_POWERUP_LOCK;
}
static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
#ifdef AMD_BOOTLOC_BUG
static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
#ifdef AMD_BOOTLOC_BUG
-@@ -252,6 +294,9 @@ static struct cfi_fixup fixup_table[] =
*/
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
*/
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
-Index: linux-2.6.25.4/drivers/mtd/chips/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.25.4/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
+--- a/drivers/mtd/chips/Kconfig
++++ b/drivers/mtd/chips/Kconfig
+@@ -196,6 +196,14 @@
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
-Index: linux-2.6.25.4/drivers/mtd/chips/jedec_probe.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/chips/jedec_probe.c
-+++ linux-2.6.25.4/drivers/mtd/chips/jedec_probe.c
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
@@ -121,6 +121,10 @@
#define UPD29F064115 0x221C
@@ -121,6 +121,10 @@
#define UPD29F064115 0x221C
#define PM49FL002 0x006D
#define PM49FL004 0x006E
#define PM49FL008 0x006A
#define PM49FL002 0x006D
#define PM49FL004 0x006E
#define PM49FL008 0x006A
-@@ -1170,6 +1174,54 @@ static const struct amd_flash_info jedec
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1),
}
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1),
}
-Index: linux-2.6.25.4/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/Kconfig
-+++ linux-2.6.25.4/drivers/mtd/Kconfig
-@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -57,6 +57,11 @@
depends on MTD_PARTITIONS
default y
depends on MTD_PARTITIONS
default y
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
depends on MTD_PARTITIONS
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
depends on MTD_PARTITIONS
-Index: linux-2.6.25.4/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/mtd/Makefile
-+++ linux-2.6.25.4/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -8,6 +8,7 @@
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
-Index: linux-2.6.25.4/drivers/ata/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/ata/Makefile
-+++ linux-2.6.25.4/drivers/ata/Makefile
-@@ -71,6 +71,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
+--- a/drivers/ata/Makefile
++++ b/drivers/ata/Makefile
+@@ -71,6 +71,7 @@
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
-Index: linux-2.6.25.4/drivers/ata/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/ata/Kconfig
-+++ linux-2.6.25.4/drivers/ata/Kconfig
-@@ -679,4 +679,13 @@ config PATA_BF54X
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -679,4 +679,13 @@
-Index: linux-2.6.25.4/arch/mips/kernel/head.S
-===================================================================
---- linux-2.6.25.4.orig/arch/mips/kernel/head.S
-+++ linux-2.6.25.4/arch/mips/kernel/head.S
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
@@ -126,7 +126,12 @@
/*
* Reserved space for exception handlers.
@@ -126,7 +126,12 @@
/*
* Reserved space for exception handlers.
-Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/serial/amba-pl010.c
-+++ linux-2.6.25.4/drivers/serial/amba-pl010.c
+--- a/drivers/serial/amba-pl010.c
++++ b/drivers/serial/amba-pl010.c
@@ -52,11 +52,10 @@
#include <asm/io.h>
@@ -52,11 +52,10 @@
#include <asm/io.h>
#define AMBA_ISR_PASS_LIMIT 256
#define AMBA_ISR_PASS_LIMIT 256
-@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
cr &= ~UART010_CR_TIE;
writel(cr, uap->port.membase + UART010_CR);
}
cr &= ~UART010_CR_TIE;
writel(cr, uap->port.membase + UART010_CR);
}
-@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
cr |= UART010_CR_TIE;
writel(cr, uap->port.membase + UART010_CR);
}
cr |= UART010_CR_TIE;
writel(cr, uap->port.membase + UART010_CR);
}
-@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
writel(cr, uap->port.membase + UART010_CR);
}
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
writel(cr, uap->port.membase + UART010_CR);
}
-@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
cr |= UART010_CR_MSIE;
writel(cr, uap->port.membase + UART010_CR);
}
cr |= UART010_CR_MSIE;
writel(cr, uap->port.membase + UART010_CR);
}
-@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
struct tty_struct *tty = uap->port.info->tty;
unsigned int status, ch, flag, rsr, max_count = 256;
struct tty_struct *tty = uap->port.info->tty;
unsigned int status, ch, flag, rsr, max_count = 256;
flag = TTY_NORMAL;
uap->port.icount.rx++;
flag = TTY_NORMAL;
uap->port.icount.rx++;
-@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a
* Note that the error handling code is
* out of the main execution path
*/
* Note that the error handling code is
* out of the main execution path
*/
if (unlikely(rsr & UART01x_RSR_ANY)) {
writel(0, uap->port.membase + UART01x_ECR);
if (unlikely(rsr & UART01x_RSR_ANY)) {
writel(0, uap->port.membase + UART01x_ECR);
-@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
}
spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
}
spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
-@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua
writel(0, uap->port.membase + UART010_ICR);
writel(0, uap->port.membase + UART010_ICR);
delta = status ^ uap->old_status;
uap->old_status = status;
delta = status ^ uap->old_status;
uap->old_status = status;
-@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
spin_lock(&uap->port.lock);
spin_lock(&uap->port.lock);
if (status) {
do {
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
if (status) {
do {
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
if (pass_counter-- == 0)
break;
if (pass_counter-- == 0)
break;
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
UART010_IIR_TIS));
handled = 1;
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
UART010_IIR_TIS));
handled = 1;
-@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
static unsigned int pl010_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
static unsigned int pl010_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
}
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
}
-@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
unsigned int result = 0;
unsigned int status;
unsigned int result = 0;
unsigned int status;
if (status & UART01x_FR_DCD)
result |= TIOCM_CAR;
if (status & UART01x_FR_DSR)
if (status & UART01x_FR_DCD)
result |= TIOCM_CAR;
if (status & UART01x_FR_DSR)
-@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
-@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por
/*
* initialise the old status of the modem signals
*/
/*
* initialise the old status of the modem signals
*/
/*
* Finally, enable interrupts
/*
* Finally, enable interrupts
-@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p
writel(0, uap->port.membase + UART010_CR);
/* disable break condition and fifos */
writel(0, uap->port.membase + UART010_CR);
/* disable break condition and fifos */
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
uap->port.membase + UART010_LCRH);
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
uap->port.membase + UART010_LCRH);
-@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
/*
* Ask the core to calculate the divisor for us.
*/
/*
* Ask the core to calculate the divisor for us.
*/
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
-@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
/* first, disable everything */
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
/* first, disable everything */
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
-@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
.verify_port = pl010_verify_port,
};
.verify_port = pl010_verify_port,
};
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct
unsigned int status;
do {
unsigned int status;
do {
barrier();
} while (!UART_TX_READY(status));
writel(ch, uap->port.membase + UART01x_DR);
barrier();
} while (!UART_TX_READY(status));
writel(ch, uap->port.membase + UART01x_DR);
-@@ -567,7 +566,7 @@ pl010_console_write(struct console *co,
/*
* First save the CR then disable the interrupts
*/
/*
* First save the CR then disable the interrupts
*/
writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
uart_console_write(&uap->port, s, count, pl010_console_putchar);
writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -577,7 +576,7 @@ pl010_console_write(struct console *co,
* and restore the TCR
*/
do {
* and restore the TCR
*/
do {
barrier();
} while (status & UART01x_FR_BUSY);
writel(old_cr, uap->port.membase + UART010_CR);
barrier();
} while (status & UART01x_FR_BUSY);
writel(old_cr, uap->port.membase + UART010_CR);
-@@ -589,9 +588,9 @@ static void __init
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
-@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
*baud = uap->port.uartclk / (16 * (quot + 1));
}
}
*baud = uap->port.uartclk / (16 * (quot + 1));
}
}
-@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
* if so, search for the first available port that does have
* console support.
*/
* if so, search for the first available port that does have
* console support.
*/
co->index = 0;
uap = amba_ports[co->index];
if (!uap)
co->index = 0;
uap = amba_ports[co->index];
if (!uap)
-@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
static struct uart_driver amba_reg;
static struct console amba_console = {
static struct uart_driver amba_reg;
static struct console amba_console = {
.write = pl010_console_write,
.device = uart_console_device,
.setup = pl010_console_setup,
.write = pl010_console_write,
.device = uart_console_device,
.setup = pl010_console_setup,
-@@ -659,11 +658,11 @@ static struct console amba_console = {
static struct uart_driver amba_reg = {
.owner = THIS_MODULE,
static struct uart_driver amba_reg = {
.owner = THIS_MODULE,
-Index: linux-2.6.25.4/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/serial/Kconfig
-+++ linux-2.6.25.4/drivers/serial/Kconfig
-@@ -287,10 +287,25 @@ config SERIAL_AMBA_PL010
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -287,10 +287,25 @@
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
an Integrator/AP or Integrator/PP2 platform, or if you have a
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
an Integrator/AP or Integrator/PP2 platform, or if you have a
-Index: linux-2.6.25.4/drivers/amba/bus.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/amba/bus.c
-+++ linux-2.6.25.4/drivers/amba/bus.c
+--- a/drivers/amba/bus.c
++++ b/drivers/amba/bus.c
@@ -17,6 +17,10 @@
#include <asm/io.h>
#include <asm/sizes.h>
@@ -17,6 +17,10 @@
#include <asm/io.h>
#include <asm/sizes.h>
-Index: linux-2.6.25.4/drivers/pci/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/pci/Kconfig
-+++ linux-2.6.25.4/drivers/pci/Kconfig
-@@ -42,6 +42,12 @@ config PCI_DEBUG
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -42,6 +42,12 @@
config HT_IRQ
bool "Interrupts on hypertransport devices"
default y
config HT_IRQ
bool "Interrupts on hypertransport devices"
default y
-Index: linux-2.6.25.4/drivers/pci/quirks.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/pci/quirks.c
-+++ linux-2.6.25.4/drivers/pci/quirks.c
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
@@ -24,6 +24,7 @@
#include <linux/kallsyms.h>
#include "pci.h"
@@ -24,6 +24,7 @@
#include <linux/kallsyms.h>
#include "pci.h"
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
-@@ -1495,6 +1496,7 @@ static void __devinit fixup_rev1_53c810(
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
{
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
{
-@@ -1562,6 +1564,7 @@ void pci_fixup_device(enum pci_fixup_pas
}
EXPORT_SYMBOL(pci_fixup_device);
}
EXPORT_SYMBOL(pci_fixup_device);
/* Enable 1k I/O space granularity on the Intel P64H2 */
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
{
/* Enable 1k I/O space granularity on the Intel P64H2 */
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
{
-@@ -1875,3 +1878,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
quirk_msi_intx_disable_bug);
#endif /* CONFIG_PCI_MSI */
quirk_msi_intx_disable_bug);
#endif /* CONFIG_PCI_MSI */
-Index: linux-2.6.25.4/drivers/leds/leds-gpio.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/leds-gpio.c
-+++ linux-2.6.25.4/drivers/leds/leds-gpio.c
-@@ -41,13 +41,17 @@ static void gpio_led_set(struct led_clas
+--- a/drivers/leds/leds-gpio.c
++++ b/drivers/leds/leds-gpio.c
+@@ -41,13 +41,17 @@
container_of(led_cdev, struct gpio_led_data, cdev);
int level;
container_of(led_cdev, struct gpio_led_data, cdev);
int level;
-Index: linux-2.6.25.4/drivers/watchdog/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/watchdog/Kconfig
-+++ linux-2.6.25.4/drivers/watchdog/Kconfig
-@@ -619,6 +619,18 @@ config SBC_EPX_C3_WATCHDOG
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -619,6 +619,18 @@
config INDYDOG
tristate "Indy/I2 Hardware Watchdog"
depends on SGI_HAS_INDYDOG
config INDYDOG
tristate "Indy/I2 Hardware Watchdog"
depends on SGI_HAS_INDYDOG
-Index: linux-2.6.25.4/drivers/watchdog/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/watchdog/Makefile
-+++ linux-2.6.25.4/drivers/watchdog/Makefile
-@@ -90,6 +90,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -90,6 +90,7 @@
# M68KNOMMU Architecture
# MIPS Architecture
# M68KNOMMU Architecture
# MIPS Architecture
-Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-hcd.c
-+++ linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
+--- a/drivers/usb/host/adm5120-hcd.c
++++ b/drivers/usb/host/adm5120-hcd.c
@@ -45,7 +45,7 @@
#include "../core/hcd.h"
#include "../core/hub.h"
@@ -45,7 +45,7 @@
#include "../core/hcd.h"
#include "../core/hub.h"
-Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-dbg.c
-+++ linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
-@@ -456,7 +456,7 @@ show_list(struct admhcd *ahcd, char *buf
+--- a/drivers/usb/host/adm5120-dbg.c
++++ b/drivers/usb/host/adm5120-dbg.c
+@@ -456,7 +456,7 @@
{
struct usb_bus *bus;
struct usb_hcd *hcd;
{
struct usb_bus *bus;
struct usb_hcd *hcd;
-@@ -464,7 +464,7 @@ show_async(struct class_device *class_de
size_t temp;
unsigned long flags;
size_t temp;
unsigned long flags;
hcd = bus_to_hcd(bus);
ahcd = hcd_to_admhcd(hcd);
hcd = bus_to_hcd(bus);
ahcd = hcd_to_admhcd(hcd);
-@@ -475,13 +475,13 @@ show_async(struct class_device *class_de
{
struct usb_bus *bus;
struct usb_hcd *hcd;
{
struct usb_bus *bus;
struct usb_hcd *hcd;
-@@ -496,7 +496,7 @@ show_periodic(struct class_device *class
return 0;
seen_count = 0;
return 0;
seen_count = 0;
hcd = bus_to_hcd(bus);
ahcd = hcd_to_admhcd(hcd);
next = buf;
hcd = bus_to_hcd(bus);
ahcd = hcd_to_admhcd(hcd);
next = buf;
-@@ -574,13 +574,13 @@ show_periodic(struct class_device *class
return PAGE_SIZE - size;
}
return PAGE_SIZE - size;
}
{
struct usb_bus *bus;
struct usb_hcd *hcd;
{
struct usb_bus *bus;
struct usb_hcd *hcd;
-@@ -591,7 +591,7 @@ show_registers(struct class_device *clas
hcd = bus_to_hcd(bus);
ahcd = hcd_to_admhcd(hcd);
regs = ahcd->regs;
hcd = bus_to_hcd(bus);
ahcd = hcd_to_admhcd(hcd);
regs = ahcd->regs;
-@@ -656,27 +656,27 @@ done:
spin_unlock_irqrestore(&ahcd->lock, flags);
return PAGE_SIZE - size;
}
spin_unlock_irqrestore(&ahcd->lock, flags);
return PAGE_SIZE - size;
}
-Index: linux-2.6.25.4/drivers/usb/host/adm5120.h
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/adm5120.h
-+++ linux-2.6.25.4/drivers/usb/host/adm5120.h
-@@ -431,6 +431,13 @@ struct admhcd {
+--- a/drivers/usb/host/adm5120.h
++++ b/drivers/usb/host/adm5120.h
+@@ -431,6 +431,13 @@
#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */
#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/
// there are also chip quirks/bugs in init logic
#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */
#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/
// there are also chip quirks/bugs in init logic
};
/* convert between an hcd pointer and the corresponding ahcd_hcd */
};
/* convert between an hcd pointer and the corresponding ahcd_hcd */
-Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-hcd.c
-+++ linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
+--- a/drivers/usb/host/adm5120-hcd.c
++++ b/drivers/usb/host/adm5120-hcd.c
@@ -35,6 +35,7 @@
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
@@ -35,6 +35,7 @@
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/irq.h>
-@@ -799,6 +800,14 @@ static int __init admhc_hcd_mod_init(voi
pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
sizeof (struct ed), sizeof (struct td));
pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
sizeof (struct ed), sizeof (struct td));
#ifdef PLATFORM_DRIVER
ret = platform_driver_register(&PLATFORM_DRIVER);
if (ret < 0)
#ifdef PLATFORM_DRIVER
ret = platform_driver_register(&PLATFORM_DRIVER);
if (ret < 0)
-@@ -811,6 +820,12 @@ static int __init admhc_hcd_mod_init(voi
platform_driver_unregister(&PLATFORM_DRIVER);
error_platform:
#endif
platform_driver_unregister(&PLATFORM_DRIVER);
error_platform:
#endif
return ret;
}
module_init(admhc_hcd_mod_init);
return ret;
}
module_init(admhc_hcd_mod_init);
-@@ -818,6 +833,9 @@ module_init(admhc_hcd_mod_init);
static void __exit admhc_hcd_mod_exit(void)
{
platform_driver_unregister(&PLATFORM_DRIVER);
static void __exit admhc_hcd_mod_exit(void)
{
platform_driver_unregister(&PLATFORM_DRIVER);
}
module_exit(admhc_hcd_mod_exit);
}
module_exit(admhc_hcd_mod_exit);
-Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-dbg.c
-+++ linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
-@@ -390,6 +390,42 @@ static inline void remove_debug_files(st
+--- a/drivers/usb/host/adm5120-dbg.c
++++ b/drivers/usb/host/adm5120-dbg.c
+@@ -390,6 +390,42 @@
static ssize_t
show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
{
static ssize_t
show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
{
-@@ -455,8 +491,7 @@ show_list(struct admhcd *ahcd, char *buf
{
struct usb_bus *bus;
struct usb_hcd *hcd;
{
struct usb_bus *bus;
struct usb_hcd *hcd;
-@@ -464,24 +499,22 @@ show_async(struct device *dev, struct de
size_t temp;
unsigned long flags;
size_t temp;
unsigned long flags;
{
struct usb_bus *bus;
struct usb_hcd *hcd;
{
struct usb_bus *bus;
struct usb_hcd *hcd;
-@@ -496,10 +529,10 @@ show_periodic(struct device *dev, struct
return 0;
seen_count = 0;
return 0;
seen_count = 0;
size = PAGE_SIZE;
temp = scnprintf(next, size, "size = %d\n", NUM_INTS);
size = PAGE_SIZE;
temp = scnprintf(next, size, "size = %d\n", NUM_INTS);
-@@ -574,13 +607,11 @@ show_periodic(struct device *dev, struct
return PAGE_SIZE - size;
}
return PAGE_SIZE - size;
}
{
struct usb_bus *bus;
struct usb_hcd *hcd;
{
struct usb_bus *bus;
struct usb_hcd *hcd;
-@@ -591,11 +622,11 @@ show_registers(struct device *dev, struc
size = PAGE_SIZE;
spin_lock_irqsave(&ahcd->lock, flags);
size = PAGE_SIZE;
spin_lock_irqsave(&ahcd->lock, flags);
-@@ -656,27 +687,154 @@ done:
spin_unlock_irqrestore(&ahcd->lock, flags);
return PAGE_SIZE - size;
}
spin_unlock_irqrestore(&ahcd->lock, flags);
return PAGE_SIZE - size;
}
-Index: linux-2.6.25.4/drivers/ata/pata_rb153_cf.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/ata/pata_rb153_cf.c
-+++ linux-2.6.25.4/drivers/ata/pata_rb153_cf.c
-@@ -68,20 +68,23 @@ static void rb153_pata_exec_command(stru
+--- a/drivers/ata/pata_rb153_cf.c
++++ b/drivers/ata/pata_rb153_cf.c
+@@ -68,20 +68,23 @@
rb153_pata_finish_io(ap);
}
rb153_pata_finish_io(ap);
}
-Index: linux-2.6.24.7/arch/mips/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/mips/Kconfig
-+++ linux-2.6.24.7/arch/mips/Kconfig
-@@ -16,6 +16,20 @@ choice
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -16,6 +16,20 @@
prompt "System type"
default SGI_IP22
prompt "System type"
default SGI_IP22
config MACH_ALCHEMY
bool "Alchemy processor based machines"
config MACH_ALCHEMY
bool "Alchemy processor based machines"
-@@ -689,6 +703,7 @@ config WR_PPMC
source "arch/mips/au1000/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/au1000/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
-Index: linux-2.6.24.7/arch/mips/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/mips/Makefile
-+++ linux-2.6.24.7/arch/mips/Makefile
-@@ -166,6 +166,16 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -166,6 +166,16 @@
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
-Index: linux-2.6.24.7/include/asm-mips/bootinfo.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.24.7/include/asm-mips/bootinfo.h
+--- a/include/asm-mips/bootinfo.h
++++ b/include/asm-mips/bootinfo.h
@@ -198,6 +198,58 @@
#define MACH_GROUP_BRCM 23 /* Broadcom */
#define MACH_BCM47XX 1 /* Broadcom BCM47XX */
@@ -198,6 +198,58 @@
#define MACH_GROUP_BRCM 23 /* Broadcom */
#define MACH_BCM47XX 1 /* Broadcom BCM47XX */
-Index: linux-2.6.24.7/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.24.7/drivers/mtd/maps/Kconfig
-@@ -597,5 +597,9 @@ config MTD_PLATRAM
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -597,5 +597,9 @@
This selection automatically selects the map_ram driver.
This selection automatically selects the map_ram driver.
-Index: linux-2.6.24.7/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.24.7/drivers/mtd/maps/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -45,6 +45,7 @@
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
-Index: linux-2.6.24.7/drivers/net/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/Kconfig
-+++ linux-2.6.24.7/drivers/net/Kconfig
-@@ -601,6 +601,10 @@ config MIPS_AU1X00_ENET
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -601,6 +601,10 @@
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
-Index: linux-2.6.24.7/drivers/net/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/Makefile
-+++ linux-2.6.24.7/drivers/net/Makefile
-@@ -183,6 +183,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -183,6 +183,7 @@
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
-Index: linux-2.6.24.7/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.24.7/drivers/usb/host/Kconfig
-@@ -261,3 +261,6 @@ config USB_R8A66597_HCD
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -261,3 +261,6 @@
To compile this driver as a module, choose M here: the
module will be called r8a66597-hcd.
+config USB_ADM5120_HCD
+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
+ depends on USB && MIPS_ADM5120 && EXPERIMENTAL
To compile this driver as a module, choose M here: the
module will be called r8a66597-hcd.
+config USB_ADM5120_HCD
+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
+ depends on USB && MIPS_ADM5120 && EXPERIMENTAL
-Index: linux-2.6.24.7/drivers/usb/host/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/usb/host/Makefile
-+++ linux-2.6.24.7/drivers/usb/host/Makefile
-@@ -8,6 +8,7 @@ endif
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -8,6 +8,7 @@
obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
-Index: linux-2.6.24.7/drivers/usb/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/usb/Makefile
-+++ linux-2.6.24.7/drivers/usb/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -16,6 +16,7 @@
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
-Index: linux-2.6.24.7/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/Kconfig
-+++ linux-2.6.24.7/drivers/leds/Kconfig
-@@ -18,6 +18,21 @@ config LEDS_CLASS
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -18,6 +18,21 @@
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
depends on LEDS_CLASS && PXA_SHARP_C7xx
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.24.7/drivers/leds/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/Makefile
-+++ linux-2.6.24.7/drivers/leds/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -5,6 +5,7 @@
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
-Index: linux-2.6.24.7/arch/mips/pci/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/mips/pci/Makefile
-+++ linux-2.6.24.7/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -48,3 +48,4 @@
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o
-Index: linux-2.6.24.7/include/linux/pci_ids.h
-===================================================================
---- linux-2.6.24.7.orig/include/linux/pci_ids.h
-+++ linux-2.6.24.7/include/linux/pci_ids.h
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
@@ -1703,6 +1703,9 @@
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
@@ -1703,6 +1703,9 @@
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-Index: linux-2.6.24.7/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/Kconfig
-+++ linux-2.6.24.7/drivers/leds/Kconfig
-@@ -178,4 +178,12 @@ config LEDS_TRIGGER_DEFAULT_ON
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -178,4 +178,12 @@
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
+ If unsure, say N.
+
endif # NEW_LEDS
+ If unsure, say N.
+
endif # NEW_LEDS
-Index: linux-2.6.24.7/drivers/leds/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/Makefile
-+++ linux-2.6.24.7/drivers/leds/Makefile
-@@ -28,3 +28,4 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += l
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -28,3 +28,4 @@
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
-Index: linux-2.6.24.7/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/Kconfig
-+++ linux-2.6.24.7/drivers/mtd/Kconfig
-@@ -160,6 +160,22 @@ config MTD_AFS_PARTS
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -160,6 +160,22 @@
for your particular device. It won't happen automatically. The
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
for your particular device. It won't happen automatically. The
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
comment "User Modules And Translation Layers"
config MTD_CHAR
comment "User Modules And Translation Layers"
config MTD_CHAR
-Index: linux-2.6.24.7/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/Makefile
-+++ linux-2.6.24.7/drivers/mtd/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -11,6 +11,7 @@
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
-Index: linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -47,12 +47,19 @@
#define MANUFACTURER_AMD 0x0001
#define MANUFACTURER_ATMEL 0x001F
@@ -47,12 +47,19 @@
#define MANUFACTURER_AMD 0x0001
#define MANUFACTURER_ATMEL 0x001F
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct
mtd->flags |= MTD_STUPID_LOCK;
}
mtd->flags |= MTD_STUPID_LOCK;
}
static struct cfi_fixup cfi_fixup_table[] = {
#ifdef AMD_BOOTLOC_BUG
{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
static struct cfi_fixup cfi_fixup_table[] = {
#ifdef AMD_BOOTLOC_BUG
{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
-@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
#endif
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
#endif
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
{ 0, 0, NULL, NULL }
};
static struct cfi_fixup jedec_fixup_table[] = {
{ 0, 0, NULL, NULL }
};
static struct cfi_fixup jedec_fixup_table[] = {
-Index: linux-2.6.24.7/drivers/mtd/chips/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.24.7/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
+--- a/drivers/mtd/chips/Kconfig
++++ b/drivers/mtd/chips/Kconfig
+@@ -196,6 +196,14 @@
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
-Index: linux-2.6.24.7/drivers/mtd/chips/jedec_probe.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/chips/jedec_probe.c
-+++ linux-2.6.24.7/drivers/mtd/chips/jedec_probe.c
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
@@ -121,6 +121,10 @@
#define UPD29F064115 0x221C
@@ -121,6 +121,10 @@
#define UPD29F064115 0x221C
#define PM49FL002 0x006D
#define PM49FL004 0x006E
#define PM49FL008 0x006A
#define PM49FL002 0x006D
#define PM49FL004 0x006E
#define PM49FL008 0x006A
-@@ -1264,6 +1268,58 @@ static const struct amd_flash_info jedec
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1),
}
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1),
}
-Index: linux-2.6.24.7/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/Kconfig
-+++ linux-2.6.24.7/drivers/mtd/Kconfig
-@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -57,6 +57,11 @@
depends on MTD_PARTITIONS
default y
depends on MTD_PARTITIONS
default y
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
depends on MTD_PARTITIONS
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
depends on MTD_PARTITIONS
-Index: linux-2.6.24.7/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/mtd/Makefile
-+++ linux-2.6.24.7/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -8,6 +8,7 @@
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
-Index: linux-2.6.24.7/drivers/ata/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/ata/Makefile
-+++ linux-2.6.24.7/drivers/ata/Makefile
-@@ -69,6 +69,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
+--- a/drivers/ata/Makefile
++++ b/drivers/ata/Makefile
+@@ -69,6 +69,7 @@
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
-Index: linux-2.6.24.7/drivers/ata/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/ata/Kconfig
-+++ linux-2.6.24.7/drivers/ata/Kconfig
-@@ -660,4 +660,13 @@ config PATA_BF54X
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -660,4 +660,13 @@
-Index: linux-2.6.24.7/arch/mips/kernel/head.S
-===================================================================
---- linux-2.6.24.7.orig/arch/mips/kernel/head.S
-+++ linux-2.6.24.7/arch/mips/kernel/head.S
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
@@ -126,7 +126,12 @@
/*
* Reserved space for exception handlers.
@@ -126,7 +126,12 @@
/*
* Reserved space for exception handlers.
-Index: linux-2.6.24.7/drivers/serial/amba-pl010.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/serial/amba-pl010.c
-+++ linux-2.6.24.7/drivers/serial/amba-pl010.c
+--- a/drivers/serial/amba-pl010.c
++++ b/drivers/serial/amba-pl010.c
@@ -52,11 +52,10 @@
#include <asm/io.h>
@@ -52,11 +52,10 @@
#include <asm/io.h>
#define AMBA_ISR_PASS_LIMIT 256
#define AMBA_ISR_PASS_LIMIT 256
-@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
cr &= ~UART010_CR_TIE;
writel(cr, uap->port.membase + UART010_CR);
}
cr &= ~UART010_CR_TIE;
writel(cr, uap->port.membase + UART010_CR);
}
-@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
cr |= UART010_CR_TIE;
writel(cr, uap->port.membase + UART010_CR);
}
cr |= UART010_CR_TIE;
writel(cr, uap->port.membase + UART010_CR);
}
-@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
writel(cr, uap->port.membase + UART010_CR);
}
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
writel(cr, uap->port.membase + UART010_CR);
}
-@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
cr |= UART010_CR_MSIE;
writel(cr, uap->port.membase + UART010_CR);
}
cr |= UART010_CR_MSIE;
writel(cr, uap->port.membase + UART010_CR);
}
-@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
struct tty_struct *tty = uap->port.info->tty;
unsigned int status, ch, flag, rsr, max_count = 256;
struct tty_struct *tty = uap->port.info->tty;
unsigned int status, ch, flag, rsr, max_count = 256;
flag = TTY_NORMAL;
uap->port.icount.rx++;
flag = TTY_NORMAL;
uap->port.icount.rx++;
-@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a
* Note that the error handling code is
* out of the main execution path
*/
* Note that the error handling code is
* out of the main execution path
*/
if (unlikely(rsr & UART01x_RSR_ANY)) {
writel(0, uap->port.membase + UART01x_ECR);
if (unlikely(rsr & UART01x_RSR_ANY)) {
writel(0, uap->port.membase + UART01x_ECR);
-@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
}
spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
}
spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
-@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua
writel(0, uap->port.membase + UART010_ICR);
writel(0, uap->port.membase + UART010_ICR);
delta = status ^ uap->old_status;
uap->old_status = status;
delta = status ^ uap->old_status;
uap->old_status = status;
-@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
spin_lock(&uap->port.lock);
spin_lock(&uap->port.lock);
if (status) {
do {
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
if (status) {
do {
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
if (pass_counter-- == 0)
break;
if (pass_counter-- == 0)
break;
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
UART010_IIR_TIS));
handled = 1;
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
UART010_IIR_TIS));
handled = 1;
-@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
static unsigned int pl010_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
static unsigned int pl010_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
}
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
}
-@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
unsigned int result = 0;
unsigned int status;
unsigned int result = 0;
unsigned int status;
if (status & UART01x_FR_DCD)
result |= TIOCM_CAR;
if (status & UART01x_FR_DSR)
if (status & UART01x_FR_DCD)
result |= TIOCM_CAR;
if (status & UART01x_FR_DSR)
-@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
-@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por
/*
* initialise the old status of the modem signals
*/
/*
* initialise the old status of the modem signals
*/
/*
* Finally, enable interrupts
/*
* Finally, enable interrupts
-@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p
writel(0, uap->port.membase + UART010_CR);
/* disable break condition and fifos */
writel(0, uap->port.membase + UART010_CR);
/* disable break condition and fifos */
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
uap->port.membase + UART010_LCRH);
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
uap->port.membase + UART010_LCRH);
-@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
/*
* Ask the core to calculate the divisor for us.
*/
/*
* Ask the core to calculate the divisor for us.
*/
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
-@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
/* first, disable everything */
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
/* first, disable everything */
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
-@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
.verify_port = pl010_verify_port,
};
.verify_port = pl010_verify_port,
};
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct
unsigned int status;
do {
unsigned int status;
do {
barrier();
} while (!UART_TX_READY(status));
writel(ch, uap->port.membase + UART01x_DR);
barrier();
} while (!UART_TX_READY(status));
writel(ch, uap->port.membase + UART01x_DR);
-@@ -567,7 +566,7 @@ pl010_console_write(struct console *co,
/*
* First save the CR then disable the interrupts
*/
/*
* First save the CR then disable the interrupts
*/
writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
uart_console_write(&uap->port, s, count, pl010_console_putchar);
writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -577,7 +576,7 @@ pl010_console_write(struct console *co,
* and restore the TCR
*/
do {
* and restore the TCR
*/
do {
barrier();
} while (status & UART01x_FR_BUSY);
writel(old_cr, uap->port.membase + UART010_CR);
barrier();
} while (status & UART01x_FR_BUSY);
writel(old_cr, uap->port.membase + UART010_CR);
-@@ -589,9 +588,9 @@ static void __init
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
-@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
*baud = uap->port.uartclk / (16 * (quot + 1));
}
}
*baud = uap->port.uartclk / (16 * (quot + 1));
}
}
-@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
* if so, search for the first available port that does have
* console support.
*/
* if so, search for the first available port that does have
* console support.
*/
co->index = 0;
uap = amba_ports[co->index];
if (!uap)
co->index = 0;
uap = amba_ports[co->index];
if (!uap)
-@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
static struct uart_driver amba_reg;
static struct console amba_console = {
static struct uart_driver amba_reg;
static struct console amba_console = {
.write = pl010_console_write,
.device = uart_console_device,
.setup = pl010_console_setup,
.write = pl010_console_write,
.device = uart_console_device,
.setup = pl010_console_setup,
-@@ -659,11 +658,11 @@ static struct console amba_console = {
static struct uart_driver amba_reg = {
.owner = THIS_MODULE,
static struct uart_driver amba_reg = {
.owner = THIS_MODULE,
-Index: linux-2.6.24.7/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/serial/Kconfig
-+++ linux-2.6.24.7/drivers/serial/Kconfig
-@@ -287,10 +287,25 @@ config SERIAL_AMBA_PL010
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -287,10 +287,25 @@
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
an Integrator/AP or Integrator/PP2 platform, or if you have a
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
an Integrator/AP or Integrator/PP2 platform, or if you have a
-Index: linux-2.6.24.7/drivers/amba/bus.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/amba/bus.c
-+++ linux-2.6.24.7/drivers/amba/bus.c
+--- a/drivers/amba/bus.c
++++ b/drivers/amba/bus.c
@@ -17,6 +17,10 @@
#include <asm/io.h>
#include <asm/sizes.h>
@@ -17,6 +17,10 @@
#include <asm/io.h>
#include <asm/sizes.h>
-Index: linux-2.6.24.7/drivers/pci/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/pci/Kconfig
-+++ linux-2.6.24.7/drivers/pci/Kconfig
-@@ -42,6 +42,12 @@ config PCI_DEBUG
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -42,6 +42,12 @@
config HT_IRQ
bool "Interrupts on hypertransport devices"
default y
config HT_IRQ
bool "Interrupts on hypertransport devices"
default y
-Index: linux-2.6.24.7/drivers/pci/quirks.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/pci/quirks.c
-+++ linux-2.6.24.7/drivers/pci/quirks.c
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
@@ -23,6 +23,7 @@
#include <linux/acpi.h>
#include "pci.h"
@@ -23,6 +23,7 @@
#include <linux/acpi.h>
#include "pci.h"
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
-@@ -1480,6 +1481,7 @@ static void __devinit fixup_rev1_53c810(
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
{
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
{
-@@ -1543,6 +1545,7 @@ void pci_fixup_device(enum pci_fixup_pas
}
EXPORT_SYMBOL(pci_fixup_device);
}
EXPORT_SYMBOL(pci_fixup_device);
/* Enable 1k I/O space granularity on the Intel P64H2 */
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
{
/* Enable 1k I/O space granularity on the Intel P64H2 */
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
{
-@@ -1756,3 +1759,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
quirk_msi_intx_disable_bug);
#endif /* CONFIG_PCI_MSI */
quirk_msi_intx_disable_bug);
#endif /* CONFIG_PCI_MSI */
-Index: linux-2.6.24.7/drivers/leds/leds-gpio.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/leds-gpio.c
-+++ linux-2.6.24.7/drivers/leds/leds-gpio.c
-@@ -41,13 +41,17 @@ static void gpio_led_set(struct led_clas
+--- a/drivers/leds/leds-gpio.c
++++ b/drivers/leds/leds-gpio.c
+@@ -41,13 +41,17 @@
container_of(led_cdev, struct gpio_led_data, cdev);
int level;
container_of(led_cdev, struct gpio_led_data, cdev);
int level;
-Index: linux-2.6.24.7/drivers/watchdog/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/watchdog/Kconfig
-+++ linux-2.6.24.7/drivers/watchdog/Kconfig
-@@ -607,6 +607,18 @@ config SBC_EPX_C3_WATCHDOG
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -607,6 +607,18 @@
config INDYDOG
tristate "Indy/I2 Hardware Watchdog"
depends on SGI_IP22
config INDYDOG
tristate "Indy/I2 Hardware Watchdog"
depends on SGI_IP22
-Index: linux-2.6.24.7/drivers/watchdog/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/watchdog/Makefile
-+++ linux-2.6.24.7/drivers/watchdog/Makefile
-@@ -89,6 +89,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -89,6 +89,7 @@
# M68KNOMMU Architecture
# MIPS Architecture
# M68KNOMMU Architecture
# MIPS Architecture
projects / openwrt.git / commitdiff