default y
choice
- prompt "Target Architecture"
default BR2_mipsel
help
Stuff
default "i386" if BR2_i386
default "m68k" if BR2_m68k
default "mips" if BR2_mips
- default "mipsel" if BR2_mipsel
+ default "mipsel" if BR2_mipsel || !CONFIG_DEVEL
default "powerpc" if BR2_powerpc
default "sh3" if BR2_sh3
default "sh3eb" if BR2_sh3eb
default "sparc" if BR2_sparc
-menu "Build options"
-
config BR2_WGET
- string "Wget command"
+ string
default "wget --passive-ftp -nd"
config BR2_TAR_VERBOSITY
- bool "Tar verbose"
+ bool
default n
config BR2_STAGING_DIR
- string "Toolchain and header file location?"
+ string
default "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)"
- help
- This is the location where the toolchain will be installed.
- Since the toolchain will not work if it is moved from this
- location, it is important for people wishing to package up
- a uClibc toolchain that this be set to the location in which
- the toolchain will be used.
-
- Most people will leave this set to the default value of
- "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)".
config BR2_JLEVEL
- int "Number of jobs to run simultaneously"
+ int
default "1"
- help
- Number of jobs to run simultanesouly
-
-endmenu
source "toolchain/Config.in"
source "package/Config.in"
--- /dev/null
+#
+
+mainmenu "OpenWRT Configuration"
+
+config MODULES
+ bool
+ default y
+
+config BR2_HAVE_DOT_CONFIG
+ bool
+ default y
+
+config CONFIG_DEVEL
+ bool
+ default y
+
+choice
+ prompt "Target Architecture" if CONFIG_DEVEL
+ default BR2_mipsel
+ help
+ Stuff
+
+config BR2_arm
+ bool "arm"
+
+config BR2_armeb
+ bool "armeb"
+
+config BR2_cris
+ bool "cris"
+
+config BR2_i386
+ bool "i386"
+
+config BR2_m68k
+ bool "m68k"
+
+config BR2_mips
+ bool "mips"
+
+config BR2_mipsel
+ bool "mipsel"
+
+config BR2_powerpc
+ bool "powerpc"
+
+config BR2_sh3
+ bool "sh3"
+
+config BR2_sh3eb
+ bool "sh3eb"
+
+config BR2_sh4
+ bool "sh4"
+
+config BR2_sh4eb
+ bool "sh4eb"
+
+config BR2_sparc
+ bool "sparc"
+
+endchoice
+
+config BR2_ARCH
+ string
+ default "arm" if BR2_arm
+ default "armeb" if BR2_armeb
+ default "cris" if BR2_cris
+ default "i386" if BR2_i386
+ default "m68k" if BR2_m68k
+ default "mips" if BR2_mips
+ default "mipsel" if BR2_mipsel
+ default "powerpc" if BR2_powerpc
+ default "sh3" if BR2_sh3
+ default "sh3eb" if BR2_sh3eb
+ default "sh4" if BR2_sh4
+ default "sh4eb" if BR2_sh4eb
+ default "sparc" if BR2_sparc
+
+
+menu "Build options"
+
+config BR2_WGET
+ string "Wget command"
+ default "wget --passive-ftp -nd"
+
+config BR2_TAR_VERBOSITY
+ bool "Tar verbose"
+ default n
+
+config BR2_STAGING_DIR
+ string "Toolchain and header file location?"
+ default "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)"
+ help
+ This is the location where the toolchain will be installed.
+ Since the toolchain will not work if it is moved from this
+ location, it is important for people wishing to package up
+ a uClibc toolchain that this be set to the location in which
+ the toolchain will be used.
+
+ Most people will leave this set to the default value of
+ "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)".
+
+config BR2_JLEVEL
+ int "Number of jobs to run simultaneously"
+ default "1"
+ help
+ Number of jobs to run simultanesouly
+
+endmenu
+
+source "toolchain/Config.in.devel"
+source "package/Config.in"
+source "target/Config.in"
#--------------------------------------------------------------
TOPDIR=${shell pwd}
export TOPDIR
+ifneq ($(DEVELOPER),)
+CONFIG_CONFIG_IN = Config.in.devel
+else
CONFIG_CONFIG_IN = Config.in
+endif
CONFIG_DEFCONFIG = .defconfig
CONFIG = package/config
config BR2_PACKAGE_BUSYBOX_SNAPSHOT
bool "Use the daily snapshot of busybox?"
depends BR2_PACKAGE_BUSYBOX
+ depends CONFIG_DEVEL
default n
help
Use the latest busybox CVS snapshot instead of release.
#
-menu "Toolchain Options"
-
-
source "toolchain/uClibc/Config.in"
source "toolchain/binutils/Config.in"
source "toolchain/gcc/Config.in"
source "toolchain/ccache/Config.in"
-
-comment "Common Toolchain Options"
+if CONFIG_DEVEL
+ comment "Common Toolchain Options"
+endif
config BR2_ENABLE_MULTILIB
- bool "Enable multilib support?"
+ bool
default n
- help
- If you want multilib enabled, enable this...
config BR2_LARGEFILE
- bool "Enable large file (files > 2 GB) support?"
+ bool
depends on !BR2_cris
default y
- help
- Enable large file (files > 2 GB) support
config BR2_SOFT_FLOAT
- bool "Use software floating point by default"
+ bool
default n
depends on BR2_arm || BR2_mips || BR2_powerpc
- help
- If your target CPU does not have a Floating Point Unit (FPU) or a
- kernel FPU emulator, but you still wish to support floating point
- functions, then everything will need to be compiled with soft floating
- point support (-msoft-float).
-
- Most people will answer N.
config BR2_TARGET_OPTIMIZATION
- string "Target Optimizations"
+ string
default "-Os -pipe -mips32 -mtune=mips32"
- help
- Optimizations to use when building for the target host.
-
-# Might be worth experimenting with for gcc 3.4.x.
-#GCC_WITH_CPU:=
-#GCC_WITH_ARCH:=
-#GCC_WITH_TUNE:=
-
-#GCC_WITH_CPU:=--with-cpu=
-#GCC_WITH_ARCH:=--with-arch=
-#GCC_WITH_TUNE:=--with-tune=
-
-
-endmenu
--- /dev/null
+#
+
+menu "Toolchain Options"
+
+source "toolchain/uClibc/Config.in"
+source "toolchain/binutils/Config.in"
+source "toolchain/gcc/Config.in"
+source "toolchain/ccache/Config.in"
+
+
+comment "Common Toolchain Options"
+
+config BR2_ENABLE_MULTILIB
+ bool "Enable multilib support?"
+ default n
+ help
+ If you want multilib enabled, enable this...
+
+config BR2_LARGEFILE
+ bool "Enable large file (files > 2 GB) support?"
+ depends on !BR2_cris
+ default y
+ help
+ Enable large file (files > 2 GB) support
+
+config BR2_SOFT_FLOAT
+ bool "Use software floating point by default"
+ default n
+ depends on BR2_arm || BR2_mips || BR2_powerpc
+ help
+ If your target CPU does not have a Floating Point Unit (FPU) or a
+ kernel FPU emulator, but you still wish to support floating point
+ functions, then everything will need to be compiled with soft floating
+ point support (-msoft-float).
+
+ Most people will answer N.
+
+config BR2_TARGET_OPTIMIZATION
+ string "Target Optimizations"
+ default "-Os -pipe -mips32 -mtune=mips32"
+ help
+ Optimizations to use when building for the target host.
+
+# Might be worth experimenting with for gcc 3.4.x.
+#GCC_WITH_CPU:=
+#GCC_WITH_ARCH:=
+#GCC_WITH_TUNE:=
+
+#GCC_WITH_CPU:=--with-cpu=
+#GCC_WITH_ARCH:=--with-arch=
+#GCC_WITH_TUNE:=--with-tune=
+
+
+endmenu
+
# Choose binutils version.
-comment "Binutils Options"
+if CONFIG_DEVEL
+ comment "Binutils Options"
+endif
choice
- prompt "Binutils Version"
+ prompt "Binutils Version" if CONFIG_DEVEL
default BR2_BINUTILS_VERSION_2_14_90_0_8
help
Select the version of binutils you wish to use.
string
default "2.14.90.0.6" if BR2_BINUTILS_VERSION_2_14_90_0_6
default "2.14.90.0.7" if BR2_BINUTILS_VERSION_2_14_90_0_7
- default "2.14.90.0.8" if BR2_BINUTILS_VERSION_2_14_90_0_8
+ default "2.14.90.0.8" if BR2_BINUTILS_VERSION_2_14_90_0_8 || !CONFIG_DEVEL
default "2.15" if BR2_BINUTILS_VERSION_2_15
default "2.15.90.0.1" if BR2_BINUTILS_VERSION_2_15_90_0_1
default "2.15.90.0.0.1.1" if BR2_BINUTILS_VERSION_2_15_90_0_1_1
#
-
-comment "Ccache Options"
+if CONFIG_DEVEL
+ comment "Ccache Options"
+endif
config BR2_CCACHE
- bool "Enable ccache support?"
+ bool "Enable ccache support?" if CONFIG_DEVEL
default y
help
Enable ccache support?
# WARNING -- 2.95 currently only builds for i386, arm, mips*, and powerpc.
# WARNING -- 2.95 does not currently build natively for the target.
-comment "Gcc Options"
+if CONFIG_DEVEL
+ comment "Gcc Options"
+endif
choice
- prompt "GCC compiler Version"
+ prompt "GCC compiler Version" if CONFIG_DEVEL
default BR2_GCC_VERSION_3_3_5
help
Select the version of gcc you wish to use.
config BR2_GCC_VERSION
string
- default "2.95" if BR2_GCC_VERSION_2_95
default "3.3.3" if BR2_GCC_VERSION_3_3_3
default "3.3.4" if BR2_GCC_VERSION_3_3_4
- default "3.3.5" if BR2_GCC_VERSION_3_3_5
+ default "3.3.5" if BR2_GCC_VERSION_3_3_5 || !CONFIG_DEVEL
default "3.4.0" if BR2_GCC_VERSION_3_4_0
default "3.4.1" if BR2_GCC_VERSION_3_4_1
default "3.4.2" if BR2_GCC_VERSION_3_4_2
but not dynamic. So use setjmp/longjmp exceptions by default.
config BR2_EXTRA_GCC_CONFIG_OPTIONS
- string "Additional gcc options"
+ string
+ prompt "Additional gcc options" if CONFIG_DEVEL
default ""
help
Any additional gcc options you may want to include....
config BR2_INSTALL_LIBSTDCPP
- bool "Build/install c++ compiler and libstdc++?"
+ bool
+ prompt "Build/install c++ compiler and libstdc++?" if CONFIG_DEVEL
default n
help
Build/install c++ compiler and libstdc++?
# Choose uClibc options
#
-
-comment "uClibc Options"
+if CONFIG_DEVEL
+ comment "uClibc Options"
+endif
config BR2_UCLIBC_VERSION_SNAPSHOT
- bool "Use the daily snapshot of uClibc?"
+ bool
+ prompt "Use the daily snapshot of uClibc?" if CONFIG_DEVEL
default n
help
Would you like to use the latest daily snapshot?
depends on BR2_UCLIBC_VERSION_SNAPSHOT
config BR2_ENABLE_LOCALE
- bool "Enable locale/gettext/i18n support?"
+ bool
+ prompt "Enable locale/gettext/i18n support?" if CONFIG_DEVEL
default n
help
Enable locale/gettext/i18n support?
projects / openwrt.git / commitdiff