--- /dev/null
+diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS
+new file mode 100644
+index 0000000..0af0e9e
+--- /dev/null
++++ b/Documentation/arm/OMAP/DSS
+@@ -0,0 +1,317 @@
++OMAP2/3 Display Subsystem
++-------------------------
++
++This is an almost total rewrite of the OMAP FB driver in drivers/video/omap
++(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI,
++TV-out and multiple display support, but there are lots of small improvements
++also.
++
++The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB,
++panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live
++currently side by side, you can choose which one to use.
++
++Features
++--------
++
++Working and tested features include:
++
++- MIPI DPI (parallel) output
++- MIPI DSI output in command mode
++- MIPI DBI (RFBI) output
++- SDI output
++- TV output
++- All pieces can be compiled as a module or inside kernel
++- Use DISPC to update any of the outputs
++- Use CPU to update RFBI or DSI output
++- OMAP DISPC planes
++- RGB16, RGB24 packed, RGB24 unpacked
++- YUV2, UYVY
++- Scaling
++- Adjusting DSS FCK to find a good pixel clock
++- Use DSI DPLL to create DSS FCK
++
++Tested boards include:
++- OMAP3 SDP board
++- Beagle board
++- N810
++
++omapdss driver
++--------------
++
++The DSS driver does not itself have any support for Linux framebuffer, V4L or
++such like the current ones, but it has an internal kernel API that upper level
++drivers can use.
++
++The DSS driver models OMAP's overlays, overlay managers and displays in a
++flexible way to enable non-common multi-display configuration. In addition to
++modelling the hardware overlays, omapdss supports virtual overlays and overlay
++managers. These can be used when updating a display with CPU or system DMA.
++
++Panel and controller drivers
++----------------------------
++
++The drivers implement panel or controller specific functionality and are not
++usually visible to users except through omapfb driver. They register
++themselves to the DSS driver.
++
++omapfb driver
++-------------
++
++The omapfb driver implements arbitrary number of standard linux framebuffers.
++These framebuffers can be routed flexibly to any overlays, thus allowing very
++dynamic display architecture.
++
++The driver exports some omapfb specific ioctls, which are compatible with the
++ioctls in the old driver.
++
++The rest of the non standard features are exported via sysfs. Whether the final
++implementation will use sysfs, or ioctls, is still open.
++
++V4L2 drivers
++------------
++
++V4L2 is being implemented in TI.
++
++From omapdss point of view the V4L2 drivers should be similar to framebuffer
++driver.
++
++Architecture
++--------------------
++
++Some clarification what the different components do:
++
++ - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the
++ pixel data for the image. Framebuffer has width and height and color
++ depth.
++ - Overlay defines where the pixels are read from and where they go on the
++ screen. The overlay may be smaller than framebuffer, thus displaying only
++ part of the framebuffer. The position of the overlay may be changed if
++ the overlay is smaller than the display.
++ - Overlay manager combines the overlays in to one image and feeds them to
++ display.
++ - Display is the actual physical display device.
++
++A framebuffer can be connected to multiple overlays to show the same pixel data
++on all of the overlays. Note that in this case the overlay input sizes must be
++the same, but, in case of video overlays, the output size can be different. Any
++framebuffer can be connected to any overlay.
++
++An overlay can be connected to one overlay manager. Also DISPC overlays can be
++connected only to DISPC overlay managers, and virtual overlays can be only
++connected to virtual overlays.
++
++An overlay manager can be connected to one display. There are certain
++restrictions which kinds of displays an overlay manager can be connected:
++
++ - DISPC TV overlay manager can be only connected to TV display.
++ - Virtual overlay managers can only be connected to DBI or DSI displays.
++ - DISPC LCD overlay manager can be connected to all displays, except TV
++ display.
++
++Sysfs
++-----
++The sysfs interface is mainly used for testing. I don't think sysfs
++interface is the best for this in the final version, but I don't quite know
++what would be the best interfaces for these things.
++
++The sysfs interface is divided to two parts: DSS and FB.
++
++/sys/class/graphics/fb? directory:
++mirror 0=off, 1=on
++rotate Rotation 0-3 for 0, 90, 180, 270 degrees
++rotate_type 0 = DMA rotation, 1 = VRFB rotation
++overlays List of overlay numbers to which framebuffer pixels go
++phys_addr Physical address of the framebuffer
++virt_addr Virtual address of the framebuffer
++size Size of the framebuffer
++
++/sys/devices/platform/omapdss/overlay? directory:
++enabled 0=off, 1=on
++input_size width,height (ie. the framebuffer size)
++manager Destination overlay manager name
++name
++output_size width,height
++position x,y
++screen_width width
++global_alpha global alpha 0-255 0=transparent 255=opaque
++
++/sys/devices/platform/omapdss/manager? directory:
++display Destination display
++name
++alpha_blending_enabled 0=off, 1=on
++trans_key_enabled 0=off, 1=on
++trans_key_type gfx-destination, video-source
++trans_key_value transparency color key (RGB24)
++default_color default background color (RGB24)
++
++/sys/devices/platform/omapdss/display? directory:
++ctrl_name Controller name
++mirror 0=off, 1=on
++update_mode 0=off, 1=auto, 2=manual
++enabled 0=off, 1=on
++name
++rotate Rotation 0-3 for 0, 90, 180, 270 degrees
++timings Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
++ When writing, two special timings are accepted for tv-out:
++ "pal" and "ntsc"
++panel_name
++tear_elim Tearing elimination 0=off, 1=on
++
++There are also some debugfs files at <debugfs>/omapdss/ which show information
++about clocks and registers.
++
++Examples
++--------
++
++The following definitions have been made for the examples below:
++
++ovl0=/sys/devices/platform/omapdss/overlay0
++ovl1=/sys/devices/platform/omapdss/overlay1
++ovl2=/sys/devices/platform/omapdss/overlay2
++
++mgr0=/sys/devices/platform/omapdss/manager0
++mgr1=/sys/devices/platform/omapdss/manager1
++
++lcd=/sys/devices/platform/omapdss/display0
++dvi=/sys/devices/platform/omapdss/display1
++tv=/sys/devices/platform/omapdss/display2
++
++fb0=/sys/class/graphics/fb0
++fb1=/sys/class/graphics/fb1
++fb2=/sys/class/graphics/fb2
++
++Default setup on OMAP3 SDP
++--------------------------
++
++Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI
++and TV-out are not in use. The columns from left to right are:
++framebuffers, overlays, overlay managers, displays. Framebuffers are
++handled by omapfb, and the rest by the DSS.
++
++FB0 --- GFX -\ DVI
++FB1 --- VID1 --+- LCD ---- LCD
++FB2 --- VID2 -/ TV ----- TV
++
++Example: Switch from LCD to DVI
++----------------------
++
++w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1`
++h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1`
++
++echo "0" > $lcd/enabled
++echo "" > $mgr0/display
++fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
++# at this point you have to switch the dvi/lcd dip-switch from the omap board
++echo "dvi" > $mgr0/display
++echo "1" > $dvi/enabled
++
++After this the configuration looks like:
++
++FB0 --- GFX -\ -- DVI
++FB1 --- VID1 --+- LCD -/ LCD
++FB2 --- VID2 -/ TV ----- TV
++
++Example: Clone GFX overlay to LCD and TV
++-------------------------------
++
++w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1`
++h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1`
++
++echo "0" > $ovl0/enabled
++echo "0" > $ovl1/enabled
++
++echo "" > $fb1/overlays
++echo "0,1" > $fb0/overlays
++
++echo "$w,$h" > $ovl1/output_size
++echo "tv" > $ovl1/manager
++
++echo "1" > $ovl0/enabled
++echo "1" > $ovl1/enabled
++
++echo "1" > $tv/enabled
++
++After this the configuration looks like (only relevant parts shown):
++
++FB0 +-- GFX ---- LCD ---- LCD
++ \- VID1 ---- TV ---- TV
++
++Misc notes
++----------
++
++OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator.
++
++Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
++of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
++
++Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB
++does not support mirroring.
++
++VRFB rotation requires much more memory than non-rotated framebuffer, so you
++probably need to increase your vram setting before using VRFB rotation. Also,
++many applications may not work with VRFB if they do not pay attention to all
++framebuffer parameters.
++
++Kernel boot arguments
++---------------------
++
++vram=<size>
++ - Amount of total VRAM to preallocate. For example, "10M". omapfb
++ allocates memory for framebuffers from VRAM.
++
++omapfb.mode=<display>:<mode>[,...]
++ - Default video mode for specified displays. For example,
++ "dvi:800x400MR-24@60". See drivers/video/modedb.c.
++ There are also two special modes: "pal" and "ntsc" that
++ can be used to tv out.
++
++omapfb.vram=<fbnum>:<size>[@<physaddr>][,...]
++ - VRAM allocated for a framebuffer. Normally omapfb allocates vram
++ depending on the display size. With this you can manually allocate
++ more or define the physical address of each framebuffer. For example,
++ "1:4M" to allocate 4M for fb1.
++
++omapfb.debug=<y|n>
++ - Enable debug printing. You have to have OMAPFB debug support enabled
++ in kernel config.
++
++omapfb.test=<y|n>
++ - Draw test pattern to framebuffer whenever framebuffer settings change.
++ You need to have OMAPFB debug support enabled in kernel config.
++
++omapfb.vrfb=<y|n>
++ - Use VRFB rotation for all framebuffers.
++
++omapfb.rotate=<angle>
++ - Default rotation applied to all framebuffers.
++ 0 - 0 degree rotation
++ 1 - 90 degree rotation
++ 2 - 180 degree rotation
++ 3 - 270 degree rotation
++
++omapfb.mirror=<y|n>
++ - Default mirror for all framebuffers. Only works with DMA rotation.
++
++omapdss.def_disp=<display>
++ - Name of default display, to which all overlays will be connected.
++ Common examples are "lcd" or "tv".
++
++omapdss.debug=<y|n>
++ - Enable debug printing. You have to have DSS debug support enabled in
++ kernel config.
++
++TODO
++----
++
++DSS locking
++
++Error checking
++- Lots of checks are missing or implemented just as BUG()
++
++System DMA update for DSI
++- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how
++ to skip the empty byte?)
++
++OMAP1 support
++- Not sure if needed
++
+diff --git a/MAINTAINERS b/MAINTAINERS
+index 8824115..3f5d39f 100644
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -3819,6 +3819,23 @@ L: linux-omap@vger.kernel.org
+ S: Maintained
+ F: drivers/video/omap/
+
++OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2)
++M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++L: linux-omap@vger.kernel.org
++S: Maintained
++F: drivers/video/omap2/dss/
++F: drivers/video/omap2/vrfb.c
++F: drivers/video/omap2/vram.c
++F: Documentation/arm/OMAP/DSS
++
++OMAP FRAMEBUFFER SUPPORT (FOR DSS2)
++M: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++L: linux-omap@vger.kernel.org
++S: Maintained
++F: drivers/video/omap2/omapfb/
++
+ OMAP MMC SUPPORT
+ M: Jarkko Lavinen <jarkko.lavinen@nokia.com>
+ L: linux-omap@vger.kernel.org
+diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
+index 8a4a7e2..59e26e4 100644
+--- a/arch/arm/configs/omap_3430sdp_defconfig
++++ b/arch/arm/configs/omap_3430sdp_defconfig
+@@ -1336,10 +1336,33 @@ CONFIG_FB_CFB_IMAGEBLIT=y
+ #
+ # CONFIG_FB_S1D13XXX is not set
+ # CONFIG_FB_VIRTUAL is not set
+-CONFIG_FB_OMAP=y
+-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++# CONFIG_FB_OMAP_LCD_VGA is not set
+ # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
++CONFIG_OMAP2_VRAM=y
++CONFIG_OMAP2_VRFB=y
++CONFIG_OMAP2_DSS=y
++CONFIG_OMAP2_VRAM_SIZE=4
++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
++# CONFIG_OMAP2_DSS_RFBI is not set
++CONFIG_OMAP2_DSS_VENC=y
++# CONFIG_OMAP2_DSS_SDI is not set
++# CONFIG_OMAP2_DSS_DSI is not set
++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
++CONFIG_FB_OMAP2=y
++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
++CONFIG_FB_OMAP2_NUM_FBS=3
++
++#
++# OMAP2/3 Display Device Drivers
++#
++CONFIG_PANEL_GENERIC=y
++# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
++CONFIG_PANEL_SHARP_LS037V7DW01=y
+ # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+ #
+diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
+index ed2a48a..6fbde33 100644
+--- a/arch/arm/mach-omap1/board-nokia770.c
++++ b/arch/arm/mach-omap1/board-nokia770.c
+@@ -14,6 +14,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/input.h>
+ #include <linux/clk.h>
++#include <linux/omapfb.h>
+
+ #include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
+@@ -32,7 +33,6 @@
+ #include <mach/keypad.h>
+ #include <mach/common.h>
+ #include <mach/dsp_common.h>
+-#include <mach/omapfb.h>
+ #include <mach/hwa742.h>
+ #include <mach/lcd_mipid.h>
+ #include <mach/mmc.h>
+diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
+index efaf053..60631be 100644
+--- a/arch/arm/mach-omap2/board-3430sdp.c
++++ b/arch/arm/mach-omap2/board-3430sdp.c
+@@ -36,6 +36,7 @@
+ #include <mach/common.h>
+ #include <mach/dma.h>
+ #include <mach/gpmc.h>
++#include <mach/display.h>
+
+ #include <mach/control.h>
+ #include <mach/keypad.h>
+@@ -152,31 +153,152 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
+ },
+ };
+
+-static struct platform_device sdp3430_lcd_device = {
+- .name = "sdp2430_lcd",
+- .id = -1,
++
++#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
++#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
++
++static unsigned backlight_gpio;
++static unsigned enable_gpio;
++static int lcd_enabled;
++static int dvi_enabled;
++
++static void __init sdp3430_display_init(void)
++{
++ int r;
++
++ enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
++ backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
++
++ r = gpio_request(enable_gpio, "LCD reset");
++ if (r) {
++ printk(KERN_ERR "failed to get LCD reset GPIO\n");
++ goto err0;
++ }
++
++ r = gpio_request(backlight_gpio, "LCD Backlight");
++ if (r) {
++ printk(KERN_ERR "failed to get LCD backlight GPIO\n");
++ goto err1;
++ }
++
++ gpio_direction_output(enable_gpio, 0);
++ gpio_direction_output(backlight_gpio, 0);
++
++ return;
++err1:
++ gpio_free(enable_gpio);
++err0:
++ return;
++}
++
++static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
++{
++ if (dvi_enabled) {
++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
++ return -EINVAL;
++ }
++
++ gpio_direction_output(enable_gpio, 1);
++ gpio_direction_output(backlight_gpio, 1);
++
++ lcd_enabled = 1;
++
++ return 0;
++}
++
++static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
++{
++ lcd_enabled = 0;
++
++ gpio_direction_output(enable_gpio, 0);
++ gpio_direction_output(backlight_gpio, 0);
++}
++
++static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
++{
++ if (lcd_enabled) {
++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
++ return -EINVAL;
++ }
++
++ dvi_enabled = 1;
++
++ return 0;
++}
++
++static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
++{
++ dvi_enabled = 0;
++}
++
++static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
++{
++ return 0;
++}
++
++static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
++{
++}
++
++
++static struct omap_dss_device sdp3430_lcd_device = {
++ .name = "lcd",
++ .driver_name = "sharp_ls_panel",
++ .type = OMAP_DISPLAY_TYPE_DPI,
++ .phy.dpi.data_lines = 16,
++ .platform_enable = sdp3430_panel_enable_lcd,
++ .platform_disable = sdp3430_panel_disable_lcd,
+ };
+
+-static struct regulator_consumer_supply sdp3430_vdac_supply = {
+- .supply = "vdac",
+- .dev = &sdp3430_lcd_device.dev,
++static struct omap_dss_device sdp3430_dvi_device = {
++ .name = "dvi",
++ .driver_name = "generic_panel",
++ .type = OMAP_DISPLAY_TYPE_DPI,
++ .phy.dpi.data_lines = 24,
++ .platform_enable = sdp3430_panel_enable_dvi,
++ .platform_disable = sdp3430_panel_disable_dvi,
+ };
+
+-static struct regulator_consumer_supply sdp3430_vdvi_supply = {
+- .supply = "vdvi",
+- .dev = &sdp3430_lcd_device.dev,
++static struct omap_dss_device sdp3430_tv_device = {
++ .name = "tv",
++ .driver_name = "venc",
++ .type = OMAP_DISPLAY_TYPE_VENC,
++ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
++ .platform_enable = sdp3430_panel_enable_tv,
++ .platform_disable = sdp3430_panel_disable_tv,
+ };
+
+-static struct platform_device *sdp3430_devices[] __initdata = {
++
++static struct omap_dss_device *sdp3430_dss_devices[] = {
+ &sdp3430_lcd_device,
++ &sdp3430_dvi_device,
++ &sdp3430_tv_device,
+ };
+
+-static struct omap_lcd_config sdp3430_lcd_config __initdata = {
+- .ctrl_name = "internal",
++static struct omap_dss_board_info sdp3430_dss_data = {
++ .num_devices = ARRAY_SIZE(sdp3430_dss_devices),
++ .devices = sdp3430_dss_devices,
++ .default_device = &sdp3430_lcd_device,
++};
++
++static struct platform_device sdp3430_dss_device = {
++ .name = "omapdss",
++ .id = -1,
++ .dev = {
++ .platform_data = &sdp3430_dss_data,
++ },
++};
++
++static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
++ .supply = "vdda_dac",
++ .dev = &sdp3430_dss_device.dev,
++};
++
++static struct platform_device *sdp3430_devices[] __initdata = {
++ &sdp3430_dss_device,
+ };
+
+ static struct omap_board_config_kernel sdp3430_config[] __initdata = {
+- { OMAP_TAG_LCD, &sdp3430_lcd_config },
+ };
+
+ static void __init omap_3430sdp_init_irq(void)
+@@ -392,22 +514,34 @@ static struct regulator_init_data sdp3430_vdac = {
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+- .consumer_supplies = &sdp3430_vdac_supply,
++ .consumer_supplies = &sdp3430_vdda_dac_supply,
+ };
+
+ /* VPLL2 for digital video outputs */
++static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
++ {
++ .supply = "vdvi",
++ .dev = &sdp3430_lcd_device.dev,
++ },
++ {
++ .supply = "vdds_dsi",
++ .dev = &sdp3430_dss_device.dev,
++ }
++};
++
+ static struct regulator_init_data sdp3430_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
++ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+- .num_consumer_supplies = 1,
+- .consumer_supplies = &sdp3430_vdvi_supply,
++ .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies),
++ .consumer_supplies = sdp3430_vpll2_supplies,
+ };
+
+ static struct twl4030_platform_data sdp3430_twldata = {
+@@ -499,6 +633,7 @@ static void __init omap_3430sdp_init(void)
+ omap_serial_init();
+ usb_musb_init();
+ board_smc91x_init();
++ sdp3430_display_init();
+ enable_board_wakeup_source();
+ }
+
+diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
+index e2dbedd..8524067 100644
+--- a/arch/arm/mach-omap2/clock24xx.c
++++ b/arch/arm/mach-omap2/clock24xx.c
+@@ -116,10 +116,10 @@ static struct omap_clk omap24xx_clks[] = {
+ CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
+ CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
+ /* DSS domain clocks */
+- CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X),
+- CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
+- CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
+- CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
++ CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X),
++ CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
++ CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
++ CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
+ /* L3 domain clocks */
+ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
+ CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
+diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
+index 489556e..0a7e9ac 100644
+--- a/arch/arm/mach-omap2/clock34xx.c
++++ b/arch/arm/mach-omap2/clock34xx.c
+@@ -236,13 +236,13 @@ static struct omap_clk omap34xx_clks[] = {
+ CLK("omap_rng", "ick", &rng_ick, CK_343X),
+ CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
+ CLK(NULL, "des1_ick", &des1_ick, CK_343X),
+- CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1),
+- CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2),
+- CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X),
+- CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X),
+- CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X),
+- CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1),
+- CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2),
++ CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1),
++ CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2),
++ CLK("omapdss", "tv_fck", &dss_tv_fck, CK_343X),
++ CLK("omapdss", "video_fck", &dss_96m_fck, CK_343X),
++ CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_343X),
++ CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1),
++ CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2),
+ CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
+ CLK(NULL, "cam_ick", &cam_ick, CK_343X),
+ CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
+diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
+index e3a3bad..adbb905 100644
+--- a/arch/arm/mach-omap2/io.c
++++ b/arch/arm/mach-omap2/io.c
+@@ -22,17 +22,18 @@
+ #include <linux/init.h>
+ #include <linux/io.h>
+ #include <linux/clk.h>
++#include <linux/omapfb.h>
+
+ #include <asm/tlb.h>
+
+ #include <asm/mach/map.h>
+
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <mach/sram.h>
+ #include <mach/sdrc.h>
+ #include <mach/gpmc.h>
+ #include <mach/serial.h>
++#include <mach/vram.h>
+
+ #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */
+ #include "clock.h"
+@@ -246,6 +247,7 @@ void __init omap2_map_common_io(void)
+ omap2_check_revision();
+ omap_sram_init();
+ omapfb_reserve_sdram();
++ omap_vram_reserve_sdram();
+ }
+
+ /*
+diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
+index 9e3bd4f..6a5a2c5 100644
+--- a/arch/arm/mach-omap2/sdrc.c
++++ b/arch/arm/mach-omap2/sdrc.c
+@@ -133,3 +133,19 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ (1 << SDRC_POWER_PAGEPOLICY_SHIFT);
+ sdrc_write_reg(l, SDRC_POWER);
+ }
++
++void omap2_sms_write_rot_control(u32 val, unsigned ctx)
++{
++ sms_write_reg(val, SMS_ROT_CONTROL(ctx));
++}
++
++void omap2_sms_write_rot_size(u32 val, unsigned ctx)
++{
++ sms_write_reg(val, SMS_ROT_SIZE(ctx));
++}
++
++void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
++{
++ sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx));
++}
++
+diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
+index 3746222..70fbeae 100644
+--- a/arch/arm/plat-omap/fb.c
++++ b/arch/arm/plat-omap/fb.c
+@@ -28,13 +28,13 @@
+ #include <linux/platform_device.h>
+ #include <linux/bootmem.h>
+ #include <linux/io.h>
++#include <linux/omapfb.h>
+
+ #include <mach/hardware.h>
+ #include <asm/mach/map.h>
+
+ #include <mach/board.h>
+ #include <mach/sram.h>
+-#include <mach/omapfb.h>
+
+ #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+
+@@ -327,7 +327,33 @@ static inline int omap_init_fb(void)
+
+ arch_initcall(omap_init_fb);
+
+-#else
++#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
++
++static u64 omap_fb_dma_mask = ~(u32)0;
++static struct omapfb_platform_data omapfb_config;
++
++static struct platform_device omap_fb_device = {
++ .name = "omapfb",
++ .id = -1,
++ .dev = {
++ .dma_mask = &omap_fb_dma_mask,
++ .coherent_dma_mask = ~(u32)0,
++ .platform_data = &omapfb_config,
++ },
++ .num_resources = 0,
++};
++
++void omapfb_set_platform_data(struct omapfb_platform_data *data)
++{
++ omapfb_config = *data;
++}
++
++static inline int omap_init_fb(void)
++{
++ return platform_device_register(&omap_fb_device);
++}
++
++arch_initcall(omap_init_fb);
+
+ void omapfb_reserve_sdram(void) {}
+ unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+@@ -339,5 +365,16 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+ return 0;
+ }
+
++#else
++
++void omapfb_reserve_sdram(void) {}
++unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
++ unsigned long sram_vstart,
++ unsigned long sram_size,
++ unsigned long start_avail,
++ unsigned long size_avail)
++{
++ return 0;
++}
+
+ #endif
+diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h
+new file mode 100644
+index 0000000..4c7422e
+--- /dev/null
++++ b/arch/arm/plat-omap/include/mach/display.h
+@@ -0,0 +1,540 @@
++/*
++ * linux/include/asm-arm/arch-omap/display.h
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef __ASM_ARCH_OMAP_DISPLAY_H
++#define __ASM_ARCH_OMAP_DISPLAY_H
++
++#include <linux/list.h>
++#include <linux/kobject.h>
++#include <linux/device.h>
++#include <asm/atomic.h>
++
++#define DISPC_IRQ_FRAMEDONE (1 << 0)
++#define DISPC_IRQ_VSYNC (1 << 1)
++#define DISPC_IRQ_EVSYNC_EVEN (1 << 2)
++#define DISPC_IRQ_EVSYNC_ODD (1 << 3)
++#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4)
++#define DISPC_IRQ_PROG_LINE_NUM (1 << 5)
++#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6)
++#define DISPC_IRQ_GFX_END_WIN (1 << 7)
++#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8)
++#define DISPC_IRQ_OCP_ERR (1 << 9)
++#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10)
++#define DISPC_IRQ_VID1_END_WIN (1 << 11)
++#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12)
++#define DISPC_IRQ_VID2_END_WIN (1 << 13)
++#define DISPC_IRQ_SYNC_LOST (1 << 14)
++#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15)
++#define DISPC_IRQ_WAKEUP (1 << 16)
++
++struct omap_dss_device;
++struct omap_overlay_manager;
++
++enum omap_display_type {
++ OMAP_DISPLAY_TYPE_NONE = 0,
++ OMAP_DISPLAY_TYPE_DPI = 1 << 0,
++ OMAP_DISPLAY_TYPE_DBI = 1 << 1,
++ OMAP_DISPLAY_TYPE_SDI = 1 << 2,
++ OMAP_DISPLAY_TYPE_DSI = 1 << 3,
++ OMAP_DISPLAY_TYPE_VENC = 1 << 4,
++};
++
++enum omap_plane {
++ OMAP_DSS_GFX = 0,
++ OMAP_DSS_VIDEO1 = 1,
++ OMAP_DSS_VIDEO2 = 2
++};
++
++enum omap_channel {
++ OMAP_DSS_CHANNEL_LCD = 0,
++ OMAP_DSS_CHANNEL_DIGIT = 1,
++};
++
++enum omap_color_mode {
++ OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */
++ OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */
++ OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */
++ OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */
++ OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */
++ OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */
++ OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */
++ OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */
++ OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */
++ OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */
++ OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */
++ OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */
++ OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */
++ OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */
++
++ OMAP_DSS_COLOR_GFX_OMAP3 =
++ OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
++ OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
++ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
++ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
++ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
++ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
++
++ OMAP_DSS_COLOR_VID_OMAP3 =
++ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
++ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
++ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
++ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 |
++ OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY,
++};
++
++enum omap_lcd_display_type {
++ OMAP_DSS_LCD_DISPLAY_STN,
++ OMAP_DSS_LCD_DISPLAY_TFT,
++};
++
++enum omap_dss_load_mode {
++ OMAP_DSS_LOAD_CLUT_AND_FRAME = 0,
++ OMAP_DSS_LOAD_CLUT_ONLY = 1,
++ OMAP_DSS_LOAD_FRAME_ONLY = 2,
++ OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3,
++};
++
++enum omap_dss_trans_key_type {
++ OMAP_DSS_COLOR_KEY_GFX_DST = 0,
++ OMAP_DSS_COLOR_KEY_VID_SRC = 1,
++};
++
++enum omap_rfbi_te_mode {
++ OMAP_DSS_RFBI_TE_MODE_1 = 1,
++ OMAP_DSS_RFBI_TE_MODE_2 = 2,
++};
++
++enum omap_panel_config {
++ OMAP_DSS_LCD_IVS = 1<<0,
++ OMAP_DSS_LCD_IHS = 1<<1,
++ OMAP_DSS_LCD_IPC = 1<<2,
++ OMAP_DSS_LCD_IEO = 1<<3,
++ OMAP_DSS_LCD_RF = 1<<4,
++ OMAP_DSS_LCD_ONOFF = 1<<5,
++
++ OMAP_DSS_LCD_TFT = 1<<20,
++};
++
++enum omap_dss_venc_type {
++ OMAP_DSS_VENC_TYPE_COMPOSITE,
++ OMAP_DSS_VENC_TYPE_SVIDEO,
++};
++
++enum omap_display_caps {
++ OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0,
++};
++
++enum omap_dss_update_mode {
++ OMAP_DSS_UPDATE_DISABLED = 0,
++ OMAP_DSS_UPDATE_AUTO,
++ OMAP_DSS_UPDATE_MANUAL,
++};
++
++enum omap_dss_display_state {
++ OMAP_DSS_DISPLAY_DISABLED = 0,
++ OMAP_DSS_DISPLAY_ACTIVE,
++ OMAP_DSS_DISPLAY_SUSPENDED,
++};
++
++/* XXX perhaps this should be removed */
++enum omap_dss_overlay_managers {
++ OMAP_DSS_OVL_MGR_LCD,
++ OMAP_DSS_OVL_MGR_TV,
++};
++
++enum omap_dss_rotation_type {
++ OMAP_DSS_ROT_DMA = 0,
++ OMAP_DSS_ROT_VRFB = 1,
++};
++
++enum omap_overlay_caps {
++ OMAP_DSS_OVL_CAP_SCALE = 1 << 0,
++ OMAP_DSS_OVL_CAP_DISPC = 1 << 1,
++};
++
++enum omap_overlay_manager_caps {
++ OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0,
++};
++
++/* RFBI */
++
++struct rfbi_timings {
++ int cs_on_time;
++ int cs_off_time;
++ int we_on_time;
++ int we_off_time;
++ int re_on_time;
++ int re_off_time;
++ int we_cycle_time;
++ int re_cycle_time;
++ int cs_pulse_width;
++ int access_time;
++
++ int clk_div;
++
++ u32 tim[5]; /* set by rfbi_convert_timings() */
++
++ int converted;
++};
++
++void omap_rfbi_write_command(const void *buf, u32 len);
++void omap_rfbi_read_data(void *buf, u32 len);
++void omap_rfbi_write_data(const void *buf, u32 len);
++void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
++ u16 x, u16 y,
++ u16 w, u16 h);
++int omap_rfbi_enable_te(bool enable, unsigned line);
++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
++ unsigned hs_pulse_time, unsigned vs_pulse_time,
++ int hs_pol_inv, int vs_pol_inv, int extif_div);
++
++/* DSI */
++void dsi_bus_lock(void);
++void dsi_bus_unlock(void);
++int dsi_vc_dcs_write(int channel, u8 *data, int len);
++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
++int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
++int dsi_vc_send_null(int channel);
++int dsi_vc_send_bta_sync(int channel);
++
++/* Board specific data */
++struct omap_dss_board_info {
++ int (*get_last_off_on_transaction_id)(struct device *dev);
++ int num_devices;
++ struct omap_dss_device **devices;
++ struct omap_dss_device *default_device;
++};
++
++struct omap_video_timings {
++ /* Unit: pixels */
++ u16 x_res;
++ /* Unit: pixels */
++ u16 y_res;
++ /* Unit: KHz */
++ u32 pixel_clock;
++ /* Unit: pixel clocks */
++ u16 hsw; /* Horizontal synchronization pulse width */
++ /* Unit: pixel clocks */
++ u16 hfp; /* Horizontal front porch */
++ /* Unit: pixel clocks */
++ u16 hbp; /* Horizontal back porch */
++ /* Unit: line clocks */
++ u16 vsw; /* Vertical synchronization pulse width */
++ /* Unit: line clocks */
++ u16 vfp; /* Vertical front porch */
++ /* Unit: line clocks */
++ u16 vbp; /* Vertical back porch */
++};
++
++#ifdef CONFIG_OMAP2_DSS_VENC
++/* Hardcoded timings for tv modes. Venc only uses these to
++ * identify the mode, and does not actually use the configs
++ * itself. However, the configs should be something that
++ * a normal monitor can also show */
++const extern struct omap_video_timings omap_dss_pal_timings;
++const extern struct omap_video_timings omap_dss_ntsc_timings;
++#endif
++
++struct omap_overlay_info {
++ bool enabled;
++
++ u32 paddr;
++ void __iomem *vaddr;
++ u16 screen_width;
++ u16 width;
++ u16 height;
++ enum omap_color_mode color_mode;
++ u8 rotation;
++ enum omap_dss_rotation_type rotation_type;
++ bool mirror;
++
++ u16 pos_x;
++ u16 pos_y;
++ u16 out_width; /* if 0, out_width == width */
++ u16 out_height; /* if 0, out_height == height */
++ u8 global_alpha;
++};
++
++struct omap_overlay {
++ struct kobject kobj;
++ struct list_head list;
++
++ /* static fields */
++ const char *name;
++ int id;
++ enum omap_color_mode supported_modes;
++ enum omap_overlay_caps caps;
++
++ /* dynamic fields */
++ struct omap_overlay_manager *manager;
++ struct omap_overlay_info info;
++
++ /* if true, info has been changed, but not applied() yet */
++ bool info_dirty;
++
++ int (*set_manager)(struct omap_overlay *ovl,
++ struct omap_overlay_manager *mgr);
++ int (*unset_manager)(struct omap_overlay *ovl);
++
++ int (*set_overlay_info)(struct omap_overlay *ovl,
++ struct omap_overlay_info *info);
++ void (*get_overlay_info)(struct omap_overlay *ovl,
++ struct omap_overlay_info *info);
++
++ int (*wait_for_go)(struct omap_overlay *ovl);
++};
++
++struct omap_overlay_manager_info {
++ u32 default_color;
++
++ enum omap_dss_trans_key_type trans_key_type;
++ u32 trans_key;
++ bool trans_enabled;
++
++ bool alpha_enabled;
++};
++
++struct omap_overlay_manager {
++ struct kobject kobj;
++ struct list_head list;
++
++ /* static fields */
++ const char *name;
++ int id;
++ enum omap_overlay_manager_caps caps;
++ int num_overlays;
++ struct omap_overlay **overlays;
++ enum omap_display_type supported_displays;
++
++ /* dynamic fields */
++ struct omap_dss_device *device;
++ struct omap_overlay_manager_info info;
++
++ bool device_changed;
++ /* if true, info has been changed but not applied() yet */
++ bool info_dirty;
++
++ int (*set_device)(struct omap_overlay_manager *mgr,
++ struct omap_dss_device *dssdev);
++ int (*unset_device)(struct omap_overlay_manager *mgr);
++
++ int (*set_manager_info)(struct omap_overlay_manager *mgr,
++ struct omap_overlay_manager_info *info);
++ void (*get_manager_info)(struct omap_overlay_manager *mgr,
++ struct omap_overlay_manager_info *info);
++
++ int (*apply)(struct omap_overlay_manager *mgr);
++ int (*wait_for_go)(struct omap_overlay_manager *mgr);
++};
++
++struct omap_dss_device {
++ struct device dev;
++
++ enum omap_display_type type;
++
++ union {
++ struct {
++ u8 data_lines;
++ } dpi;
++
++ struct {
++ u8 channel;
++ u8 data_lines;
++ } rfbi;
++
++ struct {
++ u8 datapairs;
++ } sdi;
++
++ struct {
++ u8 clk_lane;
++ u8 clk_pol;
++ u8 data1_lane;
++ u8 data1_pol;
++ u8 data2_lane;
++ u8 data2_pol;
++ unsigned long lp_clk_hz;
++ unsigned long ddr_clk_hz;
++
++ bool ext_te;
++ u8 ext_te_gpio;
++ } dsi;
++
++ struct {
++ enum omap_dss_venc_type type;
++ bool invert_polarity;
++ } venc;
++ } phy;
++
++ struct {
++ struct omap_video_timings timings;
++
++ int acbi; /* ac-bias pin transitions per interrupt */
++ /* Unit: line clocks */
++ int acb; /* ac-bias pin frequency */
++
++ enum omap_panel_config config;
++
++ u8 recommended_bpp;
++
++ struct omap_dss_device *ctrl;
++ } panel;
++
++ struct {
++ u8 pixel_size;
++ struct rfbi_timings rfbi_timings;
++ struct omap_dss_device *panel;
++ } ctrl;
++
++ int reset_gpio;
++
++ int max_backlight_level;
++
++ const char *name;
++
++ /* used to match device to driver */
++ const char *driver_name;
++
++ void *data;
++
++ struct omap_dss_driver *driver;
++
++ /* helper variable for driver suspend/resume */
++ bool activate_after_resume;
++
++ enum omap_display_caps caps;
++
++ struct omap_overlay_manager *manager;
++
++ enum omap_dss_display_state state;
++
++ int (*enable)(struct omap_dss_device *dssdev);
++ void (*disable)(struct omap_dss_device *dssdev);
++
++ int (*suspend)(struct omap_dss_device *dssdev);
++ int (*resume)(struct omap_dss_device *dssdev);
++
++ void (*get_resolution)(struct omap_dss_device *dssdev,
++ u16 *xres, u16 *yres);
++ int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
++
++ int (*check_timings)(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings);
++ void (*set_timings)(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings);
++ void (*get_timings)(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings);
++ int (*update)(struct omap_dss_device *dssdev,
++ u16 x, u16 y, u16 w, u16 h);
++ int (*sync)(struct omap_dss_device *dssdev);
++ int (*wait_vsync)(struct omap_dss_device *dssdev);
++
++ int (*set_update_mode)(struct omap_dss_device *dssdev,
++ enum omap_dss_update_mode);
++ enum omap_dss_update_mode (*get_update_mode)
++ (struct omap_dss_device *dssdev);
++
++ int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
++ int (*get_te)(struct omap_dss_device *dssdev);
++
++ u8 (*get_rotate)(struct omap_dss_device *dssdev);
++ int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
++
++ bool (*get_mirror)(struct omap_dss_device *dssdev);
++ int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
++
++ int (*run_test)(struct omap_dss_device *dssdev, int test);
++ int (*memory_read)(struct omap_dss_device *dssdev,
++ void *buf, size_t size,
++ u16 x, u16 y, u16 w, u16 h);
++
++ int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
++ u32 (*get_wss)(struct omap_dss_device *dssdev);
++
++ /* platform specific */
++ int (*platform_enable)(struct omap_dss_device *dssdev);
++ void (*platform_disable)(struct omap_dss_device *dssdev);
++ int (*set_backlight)(struct omap_dss_device *dssdev, int level);
++ int (*get_backlight)(struct omap_dss_device *dssdev);
++};
++
++struct omap_dss_driver {
++ struct device_driver driver;
++
++ int (*probe)(struct omap_dss_device *);
++ void (*remove)(struct omap_dss_device *);
++
++ int (*enable)(struct omap_dss_device *display);
++ void (*disable)(struct omap_dss_device *display);
++ int (*suspend)(struct omap_dss_device *display);
++ int (*resume)(struct omap_dss_device *display);
++ int (*run_test)(struct omap_dss_device *display, int test);
++
++ void (*setup_update)(struct omap_dss_device *dssdev,
++ u16 x, u16 y, u16 w, u16 h);
++
++ int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
++ int (*wait_for_te)(struct omap_dss_device *dssdev);
++
++ u8 (*get_rotate)(struct omap_dss_device *dssdev);
++ int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
++
++ bool (*get_mirror)(struct omap_dss_device *dssdev);
++ int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
++
++ int (*memory_read)(struct omap_dss_device *dssdev,
++ void *buf, size_t size,
++ u16 x, u16 y, u16 w, u16 h);
++};
++
++int omap_dss_register_driver(struct omap_dss_driver *);
++void omap_dss_unregister_driver(struct omap_dss_driver *);
++
++int omap_dss_register_device(struct omap_dss_device *);
++void omap_dss_unregister_device(struct omap_dss_device *);
++
++void omap_dss_get_device(struct omap_dss_device *dssdev);
++void omap_dss_put_device(struct omap_dss_device *dssdev);
++#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL)
++struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from);
++struct omap_dss_device *omap_dss_find_device(void *data,
++ int (*match)(struct omap_dss_device *dssdev, void *data));
++
++int omap_dss_start_device(struct omap_dss_device *dssdev);
++void omap_dss_stop_device(struct omap_dss_device *dssdev);
++
++int omap_dss_get_num_overlay_managers(void);
++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
++
++int omap_dss_get_num_overlays(void);
++struct omap_overlay *omap_dss_get_overlay(int num);
++
++typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
++int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
++
++int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout);
++int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
++ unsigned long timeout);
++
++#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
++#define to_dss_device(x) container_of((x), struct omap_dss_device, dev)
++
++#endif
+diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
+deleted file mode 100644
+index b226bdf..0000000
+--- a/arch/arm/plat-omap/include/mach/omapfb.h
++++ /dev/null
+@@ -1,398 +0,0 @@
+-/*
+- * File: arch/arm/plat-omap/include/mach/omapfb.h
+- *
+- * Framebuffer driver for TI OMAP boards
+- *
+- * Copyright (C) 2004 Nokia Corporation
+- * Author: Imre Deak <imre.deak@nokia.com>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2 of the License, or (at your
+- * option) any later version.
+- *
+- * This program is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License along
+- * with this program; if not, write to the Free Software Foundation, Inc.,
+- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+- */
+-
+-#ifndef __OMAPFB_H
+-#define __OMAPFB_H
+-
+-#include <asm/ioctl.h>
+-#include <asm/types.h>
+-
+-/* IOCTL commands. */
+-
+-#define OMAP_IOW(num, dtype) _IOW('O', num, dtype)
+-#define OMAP_IOR(num, dtype) _IOR('O', num, dtype)
+-#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype)
+-#define OMAP_IO(num) _IO('O', num)
+-
+-#define OMAPFB_MIRROR OMAP_IOW(31, int)
+-#define OMAPFB_SYNC_GFX OMAP_IO(37)
+-#define OMAPFB_VSYNC OMAP_IO(38)
+-#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int)
+-#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps)
+-#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int)
+-#define OMAPFB_LCD_TEST OMAP_IOW(45, int)
+-#define OMAPFB_CTRL_TEST OMAP_IOW(46, int)
+-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+-#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key)
+-#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key)
+-#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info)
+-#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info)
+-#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window)
+-#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info)
+-#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info)
+-
+-#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff
+-#define OMAPFB_CAPS_LCDC_MASK 0x00fff000
+-#define OMAPFB_CAPS_PANEL_MASK 0xff000000
+-
+-#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000
+-#define OMAPFB_CAPS_TEARSYNC 0x00002000
+-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000
+-#define OMAPFB_CAPS_PLANE_SCALE 0x00008000
+-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
+-#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
+-#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
+-#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
+-#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
+-
+-/* Values from DSP must map to lower 16-bits */
+-#define OMAPFB_FORMAT_MASK 0x00ff
+-#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100
+-#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200
+-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400
+-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800
+-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000
+-
+-#define OMAPFB_EVENT_READY 1
+-#define OMAPFB_EVENT_DISABLED 2
+-
+-#define OMAPFB_MEMTYPE_SDRAM 0
+-#define OMAPFB_MEMTYPE_SRAM 1
+-#define OMAPFB_MEMTYPE_MAX 1
+-
+-enum omapfb_color_format {
+- OMAPFB_COLOR_RGB565 = 0,
+- OMAPFB_COLOR_YUV422,
+- OMAPFB_COLOR_YUV420,
+- OMAPFB_COLOR_CLUT_8BPP,
+- OMAPFB_COLOR_CLUT_4BPP,
+- OMAPFB_COLOR_CLUT_2BPP,
+- OMAPFB_COLOR_CLUT_1BPP,
+- OMAPFB_COLOR_RGB444,
+- OMAPFB_COLOR_YUY422,
+-};
+-
+-struct omapfb_update_window {
+- __u32 x, y;
+- __u32 width, height;
+- __u32 format;
+- __u32 out_x, out_y;
+- __u32 out_width, out_height;
+- __u32 reserved[8];
+-};
+-
+-struct omapfb_update_window_old {
+- __u32 x, y;
+- __u32 width, height;
+- __u32 format;
+-};
+-
+-enum omapfb_plane {
+- OMAPFB_PLANE_GFX = 0,
+- OMAPFB_PLANE_VID1,
+- OMAPFB_PLANE_VID2,
+-};
+-
+-enum omapfb_channel_out {
+- OMAPFB_CHANNEL_OUT_LCD = 0,
+- OMAPFB_CHANNEL_OUT_DIGIT,
+-};
+-
+-struct omapfb_plane_info {
+- __u32 pos_x;
+- __u32 pos_y;
+- __u8 enabled;
+- __u8 channel_out;
+- __u8 mirror;
+- __u8 reserved1;
+- __u32 out_width;
+- __u32 out_height;
+- __u32 reserved2[12];
+-};
+-
+-struct omapfb_mem_info {
+- __u32 size;
+- __u8 type;
+- __u8 reserved[3];
+-};
+-
+-struct omapfb_caps {
+- __u32 ctrl;
+- __u32 plane_color;
+- __u32 wnd_color;
+-};
+-
+-enum omapfb_color_key_type {
+- OMAPFB_COLOR_KEY_DISABLED = 0,
+- OMAPFB_COLOR_KEY_GFX_DST,
+- OMAPFB_COLOR_KEY_VID_SRC,
+-};
+-
+-struct omapfb_color_key {
+- __u8 channel_out;
+- __u32 background;
+- __u32 trans_key;
+- __u8 key_type;
+-};
+-
+-enum omapfb_update_mode {
+- OMAPFB_UPDATE_DISABLED = 0,
+- OMAPFB_AUTO_UPDATE,
+- OMAPFB_MANUAL_UPDATE
+-};
+-
+-#ifdef __KERNEL__
+-
+-#include <linux/completion.h>
+-#include <linux/interrupt.h>
+-#include <linux/fb.h>
+-#include <linux/mutex.h>
+-
+-#include <mach/board.h>
+-
+-#define OMAP_LCDC_INV_VSYNC 0x0001
+-#define OMAP_LCDC_INV_HSYNC 0x0002
+-#define OMAP_LCDC_INV_PIX_CLOCK 0x0004
+-#define OMAP_LCDC_INV_OUTPUT_EN 0x0008
+-#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010
+-#define OMAP_LCDC_HSVS_OPPOSITE 0x0020
+-
+-#define OMAP_LCDC_SIGNAL_MASK 0x003f
+-
+-#define OMAP_LCDC_PANEL_TFT 0x0100
+-
+-#define OMAPFB_PLANE_XRES_MIN 8
+-#define OMAPFB_PLANE_YRES_MIN 8
+-
+-#ifdef CONFIG_ARCH_OMAP1
+-#define OMAPFB_PLANE_NUM 1
+-#else
+-#define OMAPFB_PLANE_NUM 3
+-#endif
+-
+-struct omapfb_device;
+-
+-struct lcd_panel {
+- const char *name;
+- int config; /* TFT/STN, signal inversion */
+- int bpp; /* Pixel format in fb mem */
+- int data_lines; /* Lines on LCD HW interface */
+-
+- int x_res, y_res;
+- int pixel_clock; /* In kHz */
+- int hsw; /* Horizontal synchronization
+- pulse width */
+- int hfp; /* Horizontal front porch */
+- int hbp; /* Horizontal back porch */
+- int vsw; /* Vertical synchronization
+- pulse width */
+- int vfp; /* Vertical front porch */
+- int vbp; /* Vertical back porch */
+- int acb; /* ac-bias pin frequency */
+- int pcd; /* pixel clock divider.
+- Obsolete use pixel_clock instead */
+-
+- int (*init) (struct lcd_panel *panel,
+- struct omapfb_device *fbdev);
+- void (*cleanup) (struct lcd_panel *panel);
+- int (*enable) (struct lcd_panel *panel);
+- void (*disable) (struct lcd_panel *panel);
+- unsigned long (*get_caps) (struct lcd_panel *panel);
+- int (*set_bklight_level)(struct lcd_panel *panel,
+- unsigned int level);
+- unsigned int (*get_bklight_level)(struct lcd_panel *panel);
+- unsigned int (*get_bklight_max) (struct lcd_panel *panel);
+- int (*run_test) (struct lcd_panel *panel, int test_num);
+-};
+-
+-struct extif_timings {
+- int cs_on_time;
+- int cs_off_time;
+- int we_on_time;
+- int we_off_time;
+- int re_on_time;
+- int re_off_time;
+- int we_cycle_time;
+- int re_cycle_time;
+- int cs_pulse_width;
+- int access_time;
+-
+- int clk_div;
+-
+- u32 tim[5]; /* set by extif->convert_timings */
+-
+- int converted;
+-};
+-
+-struct lcd_ctrl_extif {
+- int (*init) (struct omapfb_device *fbdev);
+- void (*cleanup) (void);
+- void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div);
+- unsigned long (*get_max_tx_rate)(void);
+- int (*convert_timings) (struct extif_timings *timings);
+- void (*set_timings) (const struct extif_timings *timings);
+- void (*set_bits_per_cycle)(int bpc);
+- void (*write_command) (const void *buf, unsigned int len);
+- void (*read_data) (void *buf, unsigned int len);
+- void (*write_data) (const void *buf, unsigned int len);
+- void (*transfer_area) (int width, int height,
+- void (callback)(void * data), void *data);
+- int (*setup_tearsync) (unsigned pin_cnt,
+- unsigned hs_pulse_time, unsigned vs_pulse_time,
+- int hs_pol_inv, int vs_pol_inv, int div);
+- int (*enable_tearsync) (int enable, unsigned line);
+-
+- unsigned long max_transmit_size;
+-};
+-
+-struct omapfb_notifier_block {
+- struct notifier_block nb;
+- void *data;
+- int plane_idx;
+-};
+-
+-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
+- unsigned long event,
+- void *fbi);
+-
+-struct omapfb_mem_region {
+- u32 paddr;
+- void __iomem *vaddr;
+- unsigned long size;
+- u8 type; /* OMAPFB_PLANE_MEM_* */
+- unsigned alloc:1; /* allocated by the driver */
+- unsigned map:1; /* kernel mapped by the driver */
+-};
+-
+-struct omapfb_mem_desc {
+- int region_cnt;
+- struct omapfb_mem_region region[OMAPFB_PLANE_NUM];
+-};
+-
+-struct lcd_ctrl {
+- const char *name;
+- void *data;
+-
+- int (*init) (struct omapfb_device *fbdev,
+- int ext_mode,
+- struct omapfb_mem_desc *req_md);
+- void (*cleanup) (void);
+- void (*bind_client) (struct omapfb_notifier_block *nb);
+- void (*get_caps) (int plane, struct omapfb_caps *caps);
+- int (*set_update_mode)(enum omapfb_update_mode mode);
+- enum omapfb_update_mode (*get_update_mode)(void);
+- int (*setup_plane) (int plane, int channel_out,
+- unsigned long offset,
+- int screen_width,
+- int pos_x, int pos_y, int width,
+- int height, int color_mode);
+- int (*set_rotate) (int angle);
+- int (*setup_mem) (int plane, size_t size,
+- int mem_type, unsigned long *paddr);
+- int (*mmap) (struct fb_info *info,
+- struct vm_area_struct *vma);
+- int (*set_scale) (int plane,
+- int orig_width, int orig_height,
+- int out_width, int out_height);
+- int (*enable_plane) (int plane, int enable);
+- int (*update_window) (struct fb_info *fbi,
+- struct omapfb_update_window *win,
+- void (*callback)(void *),
+- void *callback_data);
+- void (*sync) (void);
+- void (*suspend) (void);
+- void (*resume) (void);
+- int (*run_test) (int test_num);
+- int (*setcolreg) (u_int regno, u16 red, u16 green,
+- u16 blue, u16 transp,
+- int update_hw_mem);
+- int (*set_color_key) (struct omapfb_color_key *ck);
+- int (*get_color_key) (struct omapfb_color_key *ck);
+-};
+-
+-enum omapfb_state {
+- OMAPFB_DISABLED = 0,
+- OMAPFB_SUSPENDED= 99,
+- OMAPFB_ACTIVE = 100
+-};
+-
+-struct omapfb_plane_struct {
+- int idx;
+- struct omapfb_plane_info info;
+- enum omapfb_color_format color_mode;
+- struct omapfb_device *fbdev;
+-};
+-
+-struct omapfb_device {
+- int state;
+- int ext_lcdc; /* Using external
+- LCD controller */
+- struct mutex rqueue_mutex;
+-
+- int palette_size;
+- u32 pseudo_palette[17];
+-
+- struct lcd_panel *panel; /* LCD panel */
+- const struct lcd_ctrl *ctrl; /* LCD controller */
+- const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
+- struct lcd_ctrl_extif *ext_if; /* LCD ctrl external
+- interface */
+- struct device *dev;
+- struct fb_var_screeninfo new_var; /* for mode changes */
+-
+- struct omapfb_mem_desc mem_desc;
+- struct fb_info *fb_info[OMAPFB_PLANE_NUM];
+-};
+-
+-struct omapfb_platform_data {
+- struct omap_lcd_config lcd;
+- struct omapfb_mem_desc mem_desc;
+- void *ctrl_platform_data;
+-};
+-
+-#ifdef CONFIG_ARCH_OMAP1
+-extern struct lcd_ctrl omap1_lcd_ctrl;
+-#else
+-extern struct lcd_ctrl omap2_disp_ctrl;
+-#endif
+-
+-extern void omapfb_reserve_sdram(void);
+-extern void omapfb_register_panel(struct lcd_panel *panel);
+-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+-extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+- unsigned long event);
+-extern int omapfb_register_client(struct omapfb_notifier_block *nb,
+- omapfb_notifier_callback_t callback,
+- void *callback_data);
+-extern int omapfb_unregister_client(struct omapfb_notifier_block *nb);
+-extern int omapfb_update_window_async(struct fb_info *fbi,
+- struct omapfb_update_window *win,
+- void (*callback)(void *),
+- void *callback_data);
+-
+-/* in arch/arm/plat-omap/fb.c */
+-extern void omapfb_set_ctrl_platform_data(void *pdata);
+-
+-#endif /* __KERNEL__ */
+-
+-#endif /* __OMAPFB_H */
+diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
+index 1c09c78..3b157ce 100644
+--- a/arch/arm/plat-omap/include/mach/sdrc.h
++++ b/arch/arm/plat-omap/include/mach/sdrc.h
+@@ -88,7 +88,10 @@
+
+ /* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+-#define SMS_SYSCONFIG 0x010
++#define SMS_SYSCONFIG 0x010
++#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context)
++#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context)
++#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context)
+ /* REVISIT: fill in other SMS registers here */
+
+
+@@ -121,6 +124,10 @@ int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1);
+
++void omap2_sms_write_rot_control(u32 val, unsigned ctx);
++void omap2_sms_write_rot_size(u32 val, unsigned ctx);
++void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
++
+ #ifdef CONFIG_ARCH_OMAP2
+
+ struct memory_timings {
+diff --git a/arch/arm/plat-omap/include/mach/vram.h b/arch/arm/plat-omap/include/mach/vram.h
+new file mode 100644
+index 0000000..fe72f81
+--- /dev/null
++++ b/arch/arm/plat-omap/include/mach/vram.h
+@@ -0,0 +1,63 @@
++/*
++ * VRAM manager for OMAP
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#ifndef __OMAP_VRAM_H__
++#define __OMAP_VRAM_H__
++
++#include <linux/autoconf.h>
++#include <linux/types.h>
++
++#define OMAP_VRAM_MEMTYPE_SDRAM 0
++#define OMAP_VRAM_MEMTYPE_SRAM 1
++#define OMAP_VRAM_MEMTYPE_MAX 1
++
++extern int omap_vram_add_region(unsigned long paddr, size_t size);
++extern int omap_vram_free(unsigned long paddr, size_t size);
++extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
++extern int omap_vram_reserve(unsigned long paddr, size_t size);
++extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
++ unsigned long *largest_free_block);
++
++#ifdef CONFIG_OMAP2_VRAM
++extern void omap_vram_set_sdram_vram(u32 size, u32 start);
++extern void omap_vram_set_sram_vram(u32 size, u32 start);
++
++extern void omap_vram_reserve_sdram(void);
++extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
++ unsigned long sram_vstart,
++ unsigned long sram_size,
++ unsigned long pstart_avail,
++ unsigned long size_avail);
++#else
++static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
++static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
++
++static inline void omap_vram_reserve_sdram(void) { }
++static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
++ unsigned long sram_vstart,
++ unsigned long sram_size,
++ unsigned long pstart_avail,
++ unsigned long size_avail)
++{
++ return 0;
++}
++#endif
++
++#endif
+diff --git a/arch/arm/plat-omap/include/mach/vrfb.h b/arch/arm/plat-omap/include/mach/vrfb.h
+new file mode 100644
+index 0000000..8790612
+--- /dev/null
++++ b/arch/arm/plat-omap/include/mach/vrfb.h
+@@ -0,0 +1,46 @@
++/*
++ * VRFB Rotation Engine
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#ifndef __OMAP_VRFB_H__
++#define __OMAP_VRFB_H__
++
++#define OMAP_VRFB_LINE_LEN 2048
++
++struct vrfb {
++ u8 context;
++ void __iomem *vaddr[4];
++ unsigned long paddr[4];
++ u16 xoffset;
++ u16 yoffset;
++ u8 bytespp;
++};
++
++extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
++extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
++extern void omap_vrfb_suspend_ctx(struct vrfb *vrfb);
++extern void omap_vrfb_resume_ctx(struct vrfb *vrfb);
++extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
++ u8 bytespp);
++extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
++ u16 width, u16 height,
++ unsigned bytespp, bool yuv_mode);
++extern void omap_vrfb_restore_context(void);
++
++#endif /* __VRFB_H */
+diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
+index 75d1f26..aa9fb63 100644
+--- a/arch/arm/plat-omap/sram.c
++++ b/arch/arm/plat-omap/sram.c
+@@ -28,6 +28,7 @@
+ #include <mach/sram.h>
+ #include <mach/board.h>
+ #include <mach/cpu.h>
++#include <mach/vram.h>
+
+ #include <mach/control.h>
+
+@@ -185,6 +186,13 @@ void __init omap_detect_sram(void)
+ omap_sram_start + SRAM_BOOTLOADER_SZ,
+ omap_sram_size - SRAM_BOOTLOADER_SZ);
+ omap_sram_size -= reserved;
++
++ reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
++ omap_sram_size,
++ omap_sram_start + SRAM_BOOTLOADER_SZ,
++ omap_sram_size - SRAM_BOOTLOADER_SZ);
++ omap_sram_size -= reserved;
++
+ omap_sram_ceil = omap_sram_base + omap_sram_size;
+ }
+
+diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
+index 9bbb285..af0448f 100644
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -2161,6 +2161,7 @@ config FB_BROADSHEET
+ a bridge adapter.
+
+ source "drivers/video/omap/Kconfig"
++source "drivers/video/omap2/Kconfig"
+
+ source "drivers/video/backlight/Kconfig"
+ source "drivers/video/display/Kconfig"
+diff --git a/drivers/video/Makefile b/drivers/video/Makefile
+index 80232e1..0f8da33 100644
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -124,6 +124,7 @@ obj-$(CONFIG_FB_SM501) += sm501fb.o
+ obj-$(CONFIG_FB_XILINX) += xilinxfb.o
+ obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
+ obj-$(CONFIG_FB_OMAP) += omap/
++obj-y += omap2/
+ obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
+ obj-$(CONFIG_FB_CARMINE) += carminefb.o
+ obj-$(CONFIG_FB_MB862XX) += mb862xx/
+diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
+index 551e3e9..455c605 100644
+--- a/drivers/video/omap/Kconfig
++++ b/drivers/video/omap/Kconfig
+@@ -1,6 +1,7 @@
+ config FB_OMAP
+ tristate "OMAP frame buffer support (EXPERIMENTAL)"
+- depends on FB && ARCH_OMAP
++ depends on FB && ARCH_OMAP && (OMAP2_DSS = "n")
++
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+@@ -72,7 +73,7 @@ config FB_OMAP_LCD_MIPID
+
+ config FB_OMAP_BOOTLOADER_INIT
+ bool "Check bootloader initialization"
+- depends on FB_OMAP
++ depends on FB_OMAP || FB_OMAP2
+ help
+ Say Y here if you want to enable checking if the bootloader has
+ already initialized the display controller. In this case the
+diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c
+index 70dadf9..e0d693e 100644
+--- a/drivers/video/omap/blizzard.c
++++ b/drivers/video/omap/blizzard.c
+@@ -27,9 +27,9 @@
+ #include <linux/clk.h>
+
+ #include <mach/dma.h>
+-#include <mach/omapfb.h>
+ #include <mach/blizzard.h>
+
++#include "omapfb.h"
+ #include "dispc.h"
+
+ #define MODULE_NAME "blizzard"
+diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
+index f16e421..3f828e6 100644
+--- a/drivers/video/omap/dispc.c
++++ b/drivers/video/omap/dispc.c
+@@ -24,11 +24,12 @@
+ #include <linux/vmalloc.h>
+ #include <linux/clk.h>
+ #include <linux/io.h>
++#include <linux/platform_device.h>
+
+ #include <mach/sram.h>
+-#include <mach/omapfb.h>
+ #include <mach/board.h>
+
++#include "omapfb.h"
+ #include "dispc.h"
+
+ #define MODULE_NAME "dispc"
+@@ -188,6 +189,11 @@ static struct {
+ struct omapfb_color_key color_key;
+ } dispc;
+
++static struct platform_device omapdss_device = {
++ .name = "omapdss",
++ .id = -1,
++};
++
+ static void enable_lcd_clocks(int enable);
+
+ static void inline dispc_write_reg(int idx, u32 val)
+@@ -907,20 +913,20 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev)
+
+ static int get_dss_clocks(void)
+ {
+- dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick");
++ dispc.dss_ick = clk_get(&omapdss_device.dev, "ick");
+ if (IS_ERR(dispc.dss_ick)) {
+ dev_err(dispc.fbdev->dev, "can't get ick\n");
+ return PTR_ERR(dispc.dss_ick);
+ }
+
+- dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck");
++ dispc.dss1_fck = clk_get(&omapdss_device.dev, "dss1_fck");
+ if (IS_ERR(dispc.dss1_fck)) {
+ dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
+ clk_put(dispc.dss_ick);
+ return PTR_ERR(dispc.dss1_fck);
+ }
+
+- dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck");
++ dispc.dss_54m_fck = clk_get(&omapdss_device.dev, "tv_fck");
+ if (IS_ERR(dispc.dss_54m_fck)) {
+ dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
+ clk_put(dispc.dss_ick);
+@@ -1371,6 +1377,12 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
+ int skip_init = 0;
+ int i;
+
++ r = platform_device_register(&omapdss_device);
++ if (r) {
++ dev_err(fbdev->dev, "can't register omapdss device\n");
++ return r;
++ }
++
+ memset(&dispc, 0, sizeof(dispc));
+
+ dispc.base = ioremap(DISPC_BASE, SZ_1K);
+@@ -1508,6 +1520,7 @@ static void omap_dispc_cleanup(void)
+ free_irq(INT_24XX_DSS_IRQ, dispc.fbdev);
+ put_dss_clocks();
+ iounmap(dispc.base);
++ platform_device_unregister(&omapdss_device);
+ }
+
+ const struct lcd_ctrl omap2_int_ctrl = {
+diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
+index ca51583..b84fb7c 100644
+--- a/drivers/video/omap/hwa742.c
++++ b/drivers/video/omap/hwa742.c
+@@ -27,8 +27,8 @@
+ #include <linux/clk.h>
+
+ #include <mach/dma.h>
+-#include <mach/omapfb.h>
+ #include <mach/hwa742.h>
++#include "omapfb.h"
+
+ #define HWA742_REV_CODE_REG 0x0
+ #define HWA742_CONFIG_REG 0x2
+diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c
+index 393712b..7b7690a 100644
+--- a/drivers/video/omap/lcd_2430sdp.c
++++ b/drivers/video/omap/lcd_2430sdp.c
+@@ -28,9 +28,10 @@
+ #include <linux/i2c/twl4030.h>
+
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+
++#include "omapfb.h"
++
+ #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
+ #define SDP2430_LCD_PANEL_ENABLE_GPIO 154
+ #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24
+diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
+index 1f74399..1d3fd13 100644
+--- a/drivers/video/omap/lcd_ams_delta.c
++++ b/drivers/video/omap/lcd_ams_delta.c
+@@ -27,7 +27,8 @@
+
+ #include <mach/board-ams-delta.h>
+ #include <mach/hardware.h>
+-#include <mach/omapfb.h>
++
++#include "omapfb.h"
+
+ #define AMS_DELTA_DEFAULT_CONTRAST 112
+
+diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
+index 626ae3a..e099ad1 100644
+--- a/drivers/video/omap/lcd_apollon.c
++++ b/drivers/video/omap/lcd_apollon.c
+@@ -26,7 +26,8 @@
+
+ #include <mach/gpio.h>
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
++
++#include "omapfb.h"
+
+ /* #define USE_35INCH_LCD 1 */
+
+diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
+index 417ae5e..8df6887 100644
+--- a/drivers/video/omap/lcd_h3.c
++++ b/drivers/video/omap/lcd_h3.c
+@@ -24,7 +24,7 @@
+ #include <linux/i2c/tps65010.h>
+
+ #include <mach/gpio.h>
+-#include <mach/omapfb.h>
++#include "omapfb.h"
+
+ #define MODULE_NAME "omapfb-lcd_h3"
+
+diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c
+index 0c398bd..03a06a9 100644
+--- a/drivers/video/omap/lcd_h4.c
++++ b/drivers/video/omap/lcd_h4.c
+@@ -22,7 +22,7 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+
+-#include <mach/omapfb.h>
++#include "omapfb.h"
+
+ static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
+ {
+diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
+index cdbd8bb..18f1422 100644
+--- a/drivers/video/omap/lcd_inn1510.c
++++ b/drivers/video/omap/lcd_inn1510.c
+@@ -24,7 +24,7 @@
+ #include <linux/io.h>
+
+ #include <mach/fpga.h>
+-#include <mach/omapfb.h>
++#include "omapfb.h"
+
+ static int innovator1510_panel_init(struct lcd_panel *panel,
+ struct omapfb_device *fbdev)
+diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
+index 268f7f8..9fff86f 100644
+--- a/drivers/video/omap/lcd_inn1610.c
++++ b/drivers/video/omap/lcd_inn1610.c
+@@ -23,7 +23,7 @@
+ #include <linux/platform_device.h>
+
+ #include <mach/gpio.h>
+-#include <mach/omapfb.h>
++#include "omapfb.h"
+
+ #define MODULE_NAME "omapfb-lcd_h3"
+
+diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c
+index dbfe897..44a43ea 100644
+--- a/drivers/video/omap/lcd_ldp.c
++++ b/drivers/video/omap/lcd_ldp.c
+@@ -28,9 +28,10 @@
+
+ #include <mach/gpio.h>
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+
++#include "omapfb.h"
++
+ #define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES)
+ #define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES)
+
+diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c
+index 918ee89..62e1975 100644
+--- a/drivers/video/omap/lcd_mipid.c
++++ b/drivers/video/omap/lcd_mipid.c
+@@ -23,9 +23,10 @@
+ #include <linux/workqueue.h>
+ #include <linux/spi/spi.h>
+
+-#include <mach/omapfb.h>
+ #include <mach/lcd_mipid.h>
+
++#include "omapfb.h"
++
+ #define MIPID_MODULE_NAME "lcd_mipid"
+
+ #define MIPID_CMD_READ_DISP_ID 0x04
+diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c
+index 7a2bbe2..c3be87c 100644
+--- a/drivers/video/omap/lcd_omap2evm.c
++++ b/drivers/video/omap/lcd_omap2evm.c
+@@ -27,9 +27,10 @@
+ #include <linux/i2c/twl4030.h>
+
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+
++#include "omapfb.h"
++
+ #define LCD_PANEL_ENABLE_GPIO 154
+ #define LCD_PANEL_LR 128
+ #define LCD_PANEL_UD 129
+diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c
+index 4011910..0608a25 100644
+--- a/drivers/video/omap/lcd_omap3beagle.c
++++ b/drivers/video/omap/lcd_omap3beagle.c
+@@ -26,9 +26,10 @@
+ #include <linux/i2c/twl4030.h>
+
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+
++#include "omapfb.h"
++
+ #define LCD_PANEL_ENABLE_GPIO 170
+
+ static int omap3beagle_panel_init(struct lcd_panel *panel,
+diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c
+index b6a4c2c..c204afb 100644
+--- a/drivers/video/omap/lcd_omap3evm.c
++++ b/drivers/video/omap/lcd_omap3evm.c
+@@ -26,9 +26,10 @@
+ #include <linux/i2c/twl4030.h>
+
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+
++#include "omapfb.h"
++
+ #define LCD_PANEL_ENABLE_GPIO 153
+ #define LCD_PANEL_LR 2
+ #define LCD_PANEL_UD 3
+diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
+index b3fa88b..5755b5c 100644
+--- a/drivers/video/omap/lcd_osk.c
++++ b/drivers/video/omap/lcd_osk.c
+@@ -25,7 +25,7 @@
+
+ #include <mach/gpio.h>
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
++#include "omapfb.h"
+
+ static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
+ {
+diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c
+index 2bc5c92..63ebb1f 100644
+--- a/drivers/video/omap/lcd_overo.c
++++ b/drivers/video/omap/lcd_overo.c
+@@ -25,9 +25,10 @@
+
+ #include <mach/gpio.h>
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+
++#include "omapfb.h"
++
+ #define LCD_ENABLE 144
+
+ static int overo_panel_init(struct lcd_panel *panel,
+diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c
+index 4bf3c79..7e11a75 100644
+--- a/drivers/video/omap/lcd_palmte.c
++++ b/drivers/video/omap/lcd_palmte.c
+@@ -24,7 +24,7 @@
+ #include <linux/io.h>
+
+ #include <mach/fpga.h>
+-#include <mach/omapfb.h>
++#include "omapfb.h"
+
+ static int palmte_panel_init(struct lcd_panel *panel,
+ struct omapfb_device *fbdev)
+diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
+index 48ea1f9..ff0e6d7 100644
+--- a/drivers/video/omap/lcd_palmtt.c
++++ b/drivers/video/omap/lcd_palmtt.c
+@@ -30,7 +30,7 @@ GPIO13 - screen blanking
+ #include <linux/io.h>
+
+ #include <mach/gpio.h>
+-#include <mach/omapfb.h>
++#include "omapfb.h"
+
+ static int palmtt_panel_init(struct lcd_panel *panel,
+ struct omapfb_device *fbdev)
+diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c
+index 0697d29..2334e56 100644
+--- a/drivers/video/omap/lcd_palmz71.c
++++ b/drivers/video/omap/lcd_palmz71.c
+@@ -24,7 +24,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/io.h>
+
+-#include <mach/omapfb.h>
++#include "omapfb.h"
+
+ static int palmz71_panel_init(struct lcd_panel *panel,
+ struct omapfb_device *fbdev)
+diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
+index ab39492..520ed97 100644
+--- a/drivers/video/omap/lcdc.c
++++ b/drivers/video/omap/lcdc.c
+@@ -30,10 +30,11 @@
+ #include <linux/clk.h>
+
+ #include <mach/dma.h>
+-#include <mach/omapfb.h>
+
+ #include <asm/mach-types.h>
+
++#include "omapfb.h"
++
+ #include "lcdc.h"
+
+ #define MODULE_NAME "lcdc"
+diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h
+new file mode 100644
+index 0000000..46e4714
+--- /dev/null
++++ b/drivers/video/omap/omapfb.h
+@@ -0,0 +1,227 @@
++/*
++ * File: drivers/video/omap/omapfb.h
++ *
++ * Framebuffer driver for TI OMAP boards
++ *
++ * Copyright (C) 2004 Nokia Corporation
++ * Author: Imre Deak <imre.deak@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#ifndef __OMAPFB_H
++#define __OMAPFB_H
++
++#include <linux/fb.h>
++#include <linux/mutex.h>
++#include <linux/omapfb.h>
++
++#define OMAPFB_EVENT_READY 1
++#define OMAPFB_EVENT_DISABLED 2
++
++#define OMAP_LCDC_INV_VSYNC 0x0001
++#define OMAP_LCDC_INV_HSYNC 0x0002
++#define OMAP_LCDC_INV_PIX_CLOCK 0x0004
++#define OMAP_LCDC_INV_OUTPUT_EN 0x0008
++#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010
++#define OMAP_LCDC_HSVS_OPPOSITE 0x0020
++
++#define OMAP_LCDC_SIGNAL_MASK 0x003f
++
++#define OMAP_LCDC_PANEL_TFT 0x0100
++
++#define OMAPFB_PLANE_XRES_MIN 8
++#define OMAPFB_PLANE_YRES_MIN 8
++
++struct omapfb_device;
++
++struct lcd_panel {
++ const char *name;
++ int config; /* TFT/STN, signal inversion */
++ int bpp; /* Pixel format in fb mem */
++ int data_lines; /* Lines on LCD HW interface */
++
++ int x_res, y_res;
++ int pixel_clock; /* In kHz */
++ int hsw; /* Horizontal synchronization
++ pulse width */
++ int hfp; /* Horizontal front porch */
++ int hbp; /* Horizontal back porch */
++ int vsw; /* Vertical synchronization
++ pulse width */
++ int vfp; /* Vertical front porch */
++ int vbp; /* Vertical back porch */
++ int acb; /* ac-bias pin frequency */
++ int pcd; /* pixel clock divider.
++ Obsolete use pixel_clock instead */
++
++ int (*init) (struct lcd_panel *panel,
++ struct omapfb_device *fbdev);
++ void (*cleanup) (struct lcd_panel *panel);
++ int (*enable) (struct lcd_panel *panel);
++ void (*disable) (struct lcd_panel *panel);
++ unsigned long (*get_caps) (struct lcd_panel *panel);
++ int (*set_bklight_level)(struct lcd_panel *panel,
++ unsigned int level);
++ unsigned int (*get_bklight_level)(struct lcd_panel *panel);
++ unsigned int (*get_bklight_max) (struct lcd_panel *panel);
++ int (*run_test) (struct lcd_panel *panel, int test_num);
++};
++
++struct extif_timings {
++ int cs_on_time;
++ int cs_off_time;
++ int we_on_time;
++ int we_off_time;
++ int re_on_time;
++ int re_off_time;
++ int we_cycle_time;
++ int re_cycle_time;
++ int cs_pulse_width;
++ int access_time;
++
++ int clk_div;
++
++ u32 tim[5]; /* set by extif->convert_timings */
++
++ int converted;
++};
++
++struct lcd_ctrl_extif {
++ int (*init) (struct omapfb_device *fbdev);
++ void (*cleanup) (void);
++ void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div);
++ unsigned long (*get_max_tx_rate)(void);
++ int (*convert_timings) (struct extif_timings *timings);
++ void (*set_timings) (const struct extif_timings *timings);
++ void (*set_bits_per_cycle)(int bpc);
++ void (*write_command) (const void *buf, unsigned int len);
++ void (*read_data) (void *buf, unsigned int len);
++ void (*write_data) (const void *buf, unsigned int len);
++ void (*transfer_area) (int width, int height,
++ void (callback)(void *data), void *data);
++ int (*setup_tearsync) (unsigned pin_cnt,
++ unsigned hs_pulse_time, unsigned vs_pulse_time,
++ int hs_pol_inv, int vs_pol_inv, int div);
++ int (*enable_tearsync) (int enable, unsigned line);
++
++ unsigned long max_transmit_size;
++};
++
++struct omapfb_notifier_block {
++ struct notifier_block nb;
++ void *data;
++ int plane_idx;
++};
++
++typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
++ unsigned long event,
++ void *fbi);
++
++struct lcd_ctrl {
++ const char *name;
++ void *data;
++
++ int (*init) (struct omapfb_device *fbdev,
++ int ext_mode,
++ struct omapfb_mem_desc *req_md);
++ void (*cleanup) (void);
++ void (*bind_client) (struct omapfb_notifier_block *nb);
++ void (*get_caps) (int plane, struct omapfb_caps *caps);
++ int (*set_update_mode)(enum omapfb_update_mode mode);
++ enum omapfb_update_mode (*get_update_mode)(void);
++ int (*setup_plane) (int plane, int channel_out,
++ unsigned long offset,
++ int screen_width,
++ int pos_x, int pos_y, int width,
++ int height, int color_mode);
++ int (*set_rotate) (int angle);
++ int (*setup_mem) (int plane, size_t size,
++ int mem_type, unsigned long *paddr);
++ int (*mmap) (struct fb_info *info,
++ struct vm_area_struct *vma);
++ int (*set_scale) (int plane,
++ int orig_width, int orig_height,
++ int out_width, int out_height);
++ int (*enable_plane) (int plane, int enable);
++ int (*update_window) (struct fb_info *fbi,
++ struct omapfb_update_window *win,
++ void (*callback)(void *),
++ void *callback_data);
++ void (*sync) (void);
++ void (*suspend) (void);
++ void (*resume) (void);
++ int (*run_test) (int test_num);
++ int (*setcolreg) (u_int regno, u16 red, u16 green,
++ u16 blue, u16 transp,
++ int update_hw_mem);
++ int (*set_color_key) (struct omapfb_color_key *ck);
++ int (*get_color_key) (struct omapfb_color_key *ck);
++};
++
++enum omapfb_state {
++ OMAPFB_DISABLED = 0,
++ OMAPFB_SUSPENDED = 99,
++ OMAPFB_ACTIVE = 100
++};
++
++struct omapfb_plane_struct {
++ int idx;
++ struct omapfb_plane_info info;
++ enum omapfb_color_format color_mode;
++ struct omapfb_device *fbdev;
++};
++
++struct omapfb_device {
++ int state;
++ int ext_lcdc; /* Using external
++ LCD controller */
++ struct mutex rqueue_mutex;
++
++ int palette_size;
++ u32 pseudo_palette[17];
++
++ struct lcd_panel *panel; /* LCD panel */
++ const struct lcd_ctrl *ctrl; /* LCD controller */
++ const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
++ struct lcd_ctrl_extif *ext_if; /* LCD ctrl external
++ interface */
++ struct device *dev;
++ struct fb_var_screeninfo new_var; /* for mode changes */
++
++ struct omapfb_mem_desc mem_desc;
++ struct fb_info *fb_info[OMAPFB_PLANE_NUM];
++};
++
++#ifdef CONFIG_ARCH_OMAP1
++extern struct lcd_ctrl omap1_lcd_ctrl;
++#else
++extern struct lcd_ctrl omap2_disp_ctrl;
++#endif
++
++extern void omapfb_register_panel(struct lcd_panel *panel);
++extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
++extern void omapfb_notify_clients(struct omapfb_device *fbdev,
++ unsigned long event);
++extern int omapfb_register_client(struct omapfb_notifier_block *nb,
++ omapfb_notifier_callback_t callback,
++ void *callback_data);
++extern int omapfb_unregister_client(struct omapfb_notifier_block *nb);
++extern int omapfb_update_window_async(struct fb_info *fbi,
++ struct omapfb_update_window *win,
++ void (*callback)(void *),
++ void *callback_data);
++
++#endif /* __OMAPFB_H */
+diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
+index 0d0c8c8..a27614d 100644
+--- a/drivers/video/omap/omapfb_main.c
++++ b/drivers/video/omap/omapfb_main.c
+@@ -29,8 +29,8 @@
+ #include <linux/uaccess.h>
+
+ #include <mach/dma.h>
+-#include <mach/omapfb.h>
+
++#include "omapfb.h"
+ #include "lcdc.h"
+ #include "dispc.h"
+
+diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
+index ee01e84..fed7b1b 100644
+--- a/drivers/video/omap/rfbi.c
++++ b/drivers/video/omap/rfbi.c
+@@ -27,8 +27,7 @@
+ #include <linux/clk.h>
+ #include <linux/io.h>
+
+-#include <mach/omapfb.h>
+-
++#include "omapfb.h"
+ #include "dispc.h"
+
+ /* To work around an RFBI transfer rate limitation */
+diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
+index a769462..6853627 100644
+--- a/drivers/video/omap/sossi.c
++++ b/drivers/video/omap/sossi.c
+@@ -25,8 +25,8 @@
+ #include <linux/io.h>
+
+ #include <mach/dma.h>
+-#include <mach/omapfb.h>
+
++#include "omapfb.h"
+ #include "lcdc.h"
+
+ #define MODULE_NAME "omapfb-sossi"
+diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
+new file mode 100644
+index 0000000..d877c36
+--- /dev/null
++++ b/drivers/video/omap2/Kconfig
+@@ -0,0 +1,9 @@
++config OMAP2_VRAM
++ bool
++
++config OMAP2_VRFB
++ bool
++
++source "drivers/video/omap2/dss/Kconfig"
++source "drivers/video/omap2/omapfb/Kconfig"
++source "drivers/video/omap2/displays/Kconfig"
+diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile
+new file mode 100644
+index 0000000..d853d05
+--- /dev/null
++++ b/drivers/video/omap2/Makefile
+@@ -0,0 +1,6 @@
++obj-$(CONFIG_OMAP2_VRAM) += vram.o
++obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
++
++obj-y += dss/
++obj-y += omapfb/
++obj-y += displays/
+diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
+new file mode 100644
+index 0000000..79d2861
+--- /dev/null
++++ b/drivers/video/omap2/displays/Kconfig
+@@ -0,0 +1,28 @@
++menu "OMAP2/3 Display Device Drivers"
++ depends on OMAP2_DSS
++
++config PANEL_GENERIC
++ tristate "Generic Panel"
++ help
++ Generic panel driver.
++ Used for DVI output for Beagle and OMAP3 SDP.
++
++config PANEL_SAMSUNG_LTE430WQ_F0C
++ tristate "Samsung LTE430WQ-F0C LCD Panel"
++ depends on OMAP2_DSS
++ help
++ LCD Panel used on Overo Palo43
++
++config PANEL_SHARP_LS037V7DW01
++ tristate "Sharp LS037V7DW01 LCD Panel"
++ depends on OMAP2_DSS
++ help
++ LCD Panel used in TI's SDP3430 and EVM boards
++
++config PANEL_TAAL
++ tristate "Taal DSI Panel"
++ depends on OMAP2_DSS_DSI
++ help
++ Taal DSI command mode panel from TPO.
++
++endmenu
+diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
+new file mode 100644
+index 0000000..d44e765
+--- /dev/null
++++ b/drivers/video/omap2/displays/Makefile
+@@ -0,0 +1,5 @@
++obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
++obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o
++obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
++
++obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
+diff --git a/drivers/video/omap2/displays/panel-generic.c b/drivers/video/omap2/displays/panel-generic.c
+new file mode 100644
+index 0000000..738147e
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-generic.c
+@@ -0,0 +1,104 @@
++/*
++ * Generic panel support
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++
++#include <mach/display.h>
++
++static struct omap_video_timings generic_panel_timings = {
++ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
++ .x_res = 640,
++ .y_res = 480,
++ .pixel_clock = 23500,
++ .hfp = 48,
++ .hsw = 32,
++ .hbp = 80,
++ .vfp = 3,
++ .vsw = 4,
++ .vbp = 7,
++};
++
++static int generic_panel_probe(struct omap_dss_device *dssdev)
++{
++ dssdev->panel.config = OMAP_DSS_LCD_TFT;
++ dssdev->panel.timings = generic_panel_timings;
++
++ return 0;
++}
++
++static void generic_panel_remove(struct omap_dss_device *dssdev)
++{
++}
++
++static int generic_panel_enable(struct omap_dss_device *dssdev)
++{
++ int r = 0;
++
++ if (dssdev->platform_enable)
++ r = dssdev->platform_enable(dssdev);
++
++ return r;
++}
++
++static void generic_panel_disable(struct omap_dss_device *dssdev)
++{
++ if (dssdev->platform_disable)
++ dssdev->platform_disable(dssdev);
++}
++
++static int generic_panel_suspend(struct omap_dss_device *dssdev)
++{
++ generic_panel_disable(dssdev);
++ return 0;
++}
++
++static int generic_panel_resume(struct omap_dss_device *dssdev)
++{
++ return generic_panel_enable(dssdev);
++}
++
++static struct omap_dss_driver generic_driver = {
++ .probe = generic_panel_probe,
++ .remove = generic_panel_remove,
++
++ .enable = generic_panel_enable,
++ .disable = generic_panel_disable,
++ .suspend = generic_panel_suspend,
++ .resume = generic_panel_resume,
++
++ .driver = {
++ .name = "generic_panel",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init generic_panel_drv_init(void)
++{
++ return omap_dss_register_driver(&generic_driver);
++}
++
++static void __exit generic_panel_drv_exit(void)
++{
++ omap_dss_unregister_driver(&generic_driver);
++}
++
++module_init(generic_panel_drv_init);
++module_exit(generic_panel_drv_exit);
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+new file mode 100644
+index 0000000..eafe581
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+@@ -0,0 +1,113 @@
++/*
++ * LCD panel driver for Samsung LTE430WQ-F0C
++ *
++ * Author: Steve Sakoman <steve@sakoman.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++
++#include <mach/display.h>
++
++static struct omap_video_timings samsung_lte_timings = {
++ .x_res = 480,
++ .y_res = 272,
++
++ .pixel_clock = 9200,
++
++ .hsw = 41,
++ .hfp = 8,
++ .hbp = 45-41,
++
++ .vsw = 10,
++ .vfp = 4,
++ .vbp = 12-10,
++};
++
++static int samsung_lte_panel_probe(struct omap_dss_device *dssdev)
++{
++ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
++ OMAP_DSS_LCD_IHS;
++ dssdev->panel.timings = samsung_lte_timings;
++
++ return 0;
++}
++
++static void samsung_lte_panel_remove(struct omap_dss_device *dssdev)
++{
++}
++
++static int samsung_lte_panel_enable(struct omap_dss_device *dssdev)
++{
++ int r = 0;
++
++ /* wait couple of vsyncs until enabling the LCD */
++ msleep(50);
++
++ if (dssdev->platform_enable)
++ r = dssdev->platform_enable(dssdev);
++
++ return r;
++}
++
++static void samsung_lte_panel_disable(struct omap_dss_device *dssdev)
++{
++ if (dssdev->platform_disable)
++ dssdev->platform_disable(dssdev);
++
++ /* wait at least 5 vsyncs after disabling the LCD */
++
++ msleep(100);
++}
++
++static int samsung_lte_panel_suspend(struct omap_dss_device *dssdev)
++{
++ samsung_lte_panel_disable(dssdev);
++ return 0;
++}
++
++static int samsung_lte_panel_resume(struct omap_dss_device *dssdev)
++{
++ return samsung_lte_panel_enable(dssdev);
++}
++
++static struct omap_dss_driver samsung_lte_driver = {
++ .probe = samsung_lte_panel_probe,
++ .remove = samsung_lte_panel_remove,
++
++ .enable = samsung_lte_panel_enable,
++ .disable = samsung_lte_panel_disable,
++ .suspend = samsung_lte_panel_suspend,
++ .resume = samsung_lte_panel_resume,
++
++ .driver = {
++ .name = "samsung_lte_panel",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init samsung_lte_panel_drv_init(void)
++{
++ return omap_dss_register_driver(&samsung_lte_driver);
++}
++
++static void __exit samsung_lte_panel_drv_exit(void)
++{
++ omap_dss_unregister_driver(&samsung_lte_driver);
++}
++
++module_init(samsung_lte_panel_drv_init);
++module_exit(samsung_lte_panel_drv_exit);
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+new file mode 100644
+index 0000000..2f8f0df
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+@@ -0,0 +1,153 @@
++/*
++ * LCD panel driver for Sharp LS037V7DW01
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/regulator/consumer.h>
++#include <linux/err.h>
++
++#include <mach/display.h>
++
++struct sharp_data {
++ /* XXX This regulator should actually be in SDP board file, not here,
++ * as it doesn't actually power the LCD, but something else that
++ * affects the output to LCD (I think. Somebody clarify). It doesn't do
++ * harm here, as SDP is the only board using this currently */
++ struct regulator *vdvi_reg;
++};
++
++static struct omap_video_timings sharp_ls_timings = {
++ .x_res = 480,
++ .y_res = 640,
++
++ .pixel_clock = 19200,
++
++ .hsw = 2,
++ .hfp = 1,
++ .hbp = 28,
++
++ .vsw = 1,
++ .vfp = 1,
++ .vbp = 1,
++};
++
++static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
++{
++ struct sharp_data *sd;
++
++ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
++ OMAP_DSS_LCD_IHS;
++ dssdev->panel.acb = 0x28;
++ dssdev->panel.timings = sharp_ls_timings;
++
++ sd = kzalloc(sizeof(*sd), GFP_KERNEL);
++ if (!sd)
++ return -ENOMEM;
++
++ dev_set_drvdata(&dssdev->dev, sd);
++
++ sd->vdvi_reg = regulator_get(&dssdev->dev, "vdvi");
++ if (IS_ERR(sd->vdvi_reg)) {
++ kfree(sd);
++ pr_err("failed to get VDVI regulator\n");
++ return PTR_ERR(sd->vdvi_reg);
++ }
++
++ return 0;
++}
++
++static void sharp_ls_panel_remove(struct omap_dss_device *dssdev)
++{
++ struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
++
++ regulator_put(sd->vdvi_reg);
++
++ kfree(sd);
++}
++
++static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
++{
++ struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
++ int r = 0;
++
++ /* wait couple of vsyncs until enabling the LCD */
++ msleep(50);
++
++ regulator_enable(sd->vdvi_reg);
++
++ if (dssdev->platform_enable)
++ r = dssdev->platform_enable(dssdev);
++
++ return r;
++}
++
++static void sharp_ls_panel_disable(struct omap_dss_device *dssdev)
++{
++ struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
++
++ if (dssdev->platform_disable)
++ dssdev->platform_disable(dssdev);
++
++ regulator_disable(sd->vdvi_reg);
++
++ /* wait at least 5 vsyncs after disabling the LCD */
++
++ msleep(100);
++}
++
++static int sharp_ls_panel_suspend(struct omap_dss_device *dssdev)
++{
++ sharp_ls_panel_disable(dssdev);
++ return 0;
++}
++
++static int sharp_ls_panel_resume(struct omap_dss_device *dssdev)
++{
++ return sharp_ls_panel_enable(dssdev);
++}
++
++static struct omap_dss_driver sharp_ls_driver = {
++ .probe = sharp_ls_panel_probe,
++ .remove = sharp_ls_panel_remove,
++
++ .enable = sharp_ls_panel_enable,
++ .disable = sharp_ls_panel_disable,
++ .suspend = sharp_ls_panel_suspend,
++ .resume = sharp_ls_panel_resume,
++
++ .driver = {
++ .name = "sharp_ls_panel",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init sharp_ls_panel_drv_init(void)
++{
++ return omap_dss_register_driver(&sharp_ls_driver);
++}
++
++static void __exit sharp_ls_panel_drv_exit(void)
++{
++ omap_dss_unregister_driver(&sharp_ls_driver);
++}
++
++module_init(sharp_ls_panel_drv_init);
++module_exit(sharp_ls_panel_drv_exit);
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
+new file mode 100644
+index 0000000..84f0d47
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-taal.c
+@@ -0,0 +1,900 @@
++/*
++ * Taal DSI command mode panel
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/jiffies.h>
++#include <linux/sched.h>
++#include <linux/backlight.h>
++#include <linux/fb.h>
++#include <linux/interrupt.h>
++#include <linux/gpio.h>
++#include <linux/completion.h>
++
++#include <mach/display.h>
++
++/* DSI Virtual channel. Hardcoded for now. */
++#define TCH 0
++
++#define DCS_READ_NUM_ERRORS 0x05
++#define DCS_READ_POWER_MODE 0x0a
++#define DCS_READ_MADCTL 0x0b
++#define DCS_READ_PIXEL_FORMAT 0x0c
++#define DCS_SLEEP_IN 0x10
++#define DCS_SLEEP_OUT 0x11
++#define DCS_DISPLAY_OFF 0x28
++#define DCS_DISPLAY_ON 0x29
++#define DCS_COLUMN_ADDR 0x2a
++#define DCS_PAGE_ADDR 0x2b
++#define DCS_MEMORY_WRITE 0x2c
++#define DCS_TEAR_OFF 0x34
++#define DCS_TEAR_ON 0x35
++#define DCS_MEM_ACC_CTRL 0x36
++#define DCS_PIXEL_FORMAT 0x3a
++#define DCS_BRIGHTNESS 0x51
++#define DCS_CTRL_DISPLAY 0x53
++#define DCS_WRITE_CABC 0x55
++#define DCS_READ_CABC 0x56
++#define DCS_GET_ID1 0xda
++#define DCS_GET_ID2 0xdb
++#define DCS_GET_ID3 0xdc
++
++struct taal_data {
++ struct backlight_device *bldev;
++
++ unsigned long hw_guard_end; /* next value of jiffies when we can
++ * issue the next sleep in/out command
++ */
++ unsigned long hw_guard_wait; /* max guard time in jiffies */
++
++ struct omap_dss_device *dssdev;
++
++ bool enabled;
++ u8 rotate;
++ bool mirror;
++
++ bool te_enabled;
++ bool use_ext_te;
++ struct completion te_completion;
++
++ bool use_dsi_bl;
++
++ bool cabc_broken;
++ unsigned cabc_mode;
++
++ bool intro_printed;
++};
++
++static void hw_guard_start(struct taal_data *td, int guard_msec)
++{
++ td->hw_guard_wait = msecs_to_jiffies(guard_msec);
++ td->hw_guard_end = jiffies + td->hw_guard_wait;
++}
++
++static void hw_guard_wait(struct taal_data *td)
++{
++ unsigned long wait = td->hw_guard_end - jiffies;
++
++ if ((long)wait > 0 && wait <= td->hw_guard_wait) {
++ set_current_state(TASK_UNINTERRUPTIBLE);
++ schedule_timeout(wait);
++ }
++}
++
++static int taal_dcs_read_1(u8 dcs_cmd, u8 *data)
++{
++ int r;
++ u8 buf[1];
++
++ r = dsi_vc_dcs_read(TCH, dcs_cmd, buf, 1);
++
++ if (r < 0)
++ return r;
++
++ *data = buf[0];
++
++ return 0;
++}
++
++static int taal_dcs_write_0(u8 dcs_cmd)
++{
++ return dsi_vc_dcs_write(TCH, &dcs_cmd, 1);
++}
++
++static int taal_dcs_write_1(u8 dcs_cmd, u8 param)
++{
++ u8 buf[2];
++ buf[0] = dcs_cmd;
++ buf[1] = param;
++ return dsi_vc_dcs_write(TCH, buf, 2);
++}
++
++static int taal_sleep_in(struct taal_data *td)
++
++{
++ u8 cmd;
++ int r;
++
++ hw_guard_wait(td);
++
++ cmd = DCS_SLEEP_IN;
++ r = dsi_vc_dcs_write_nosync(TCH, &cmd, 1);
++ if (r)
++ return r;
++
++ hw_guard_start(td, 120);
++
++ msleep(5);
++
++ return 0;
++}
++
++static int taal_sleep_out(struct taal_data *td)
++{
++ int r;
++
++ hw_guard_wait(td);
++
++ r = taal_dcs_write_0(DCS_SLEEP_OUT);
++ if (r)
++ return r;
++
++ hw_guard_start(td, 120);
++
++ msleep(5);
++
++ return 0;
++}
++
++static int taal_get_id(u8 *id1, u8 *id2, u8 *id3)
++{
++ int r;
++
++ r = taal_dcs_read_1(DCS_GET_ID1, id1);
++ if (r)
++ return r;
++ r = taal_dcs_read_1(DCS_GET_ID2, id2);
++ if (r)
++ return r;
++ r = taal_dcs_read_1(DCS_GET_ID3, id3);
++ if (r)
++ return r;
++
++ return 0;
++}
++
++static int taal_set_addr_mode(u8 rotate, bool mirror)
++{
++ int r;
++ u8 mode;
++ int b5, b6, b7;
++
++ r = taal_dcs_read_1(DCS_READ_MADCTL, &mode);
++ if (r)
++ return r;
++
++ switch (rotate) {
++ default:
++ case 0:
++ b7 = 0;
++ b6 = 0;
++ b5 = 0;
++ break;
++ case 1:
++ b7 = 0;
++ b6 = 1;
++ b5 = 1;
++ break;
++ case 2:
++ b7 = 1;
++ b6 = 1;
++ b5 = 0;
++ break;
++ case 3:
++ b7 = 1;
++ b6 = 0;
++ b5 = 1;
++ break;
++ }
++
++ if (mirror)
++ b6 = !b6;
++
++ mode &= ~((1<<7) | (1<<6) | (1<<5));
++ mode |= (b7 << 7) | (b6 << 6) | (b5 << 5);
++
++ return taal_dcs_write_1(DCS_MEM_ACC_CTRL, mode);
++}
++
++static int taal_set_update_window(u16 x, u16 y, u16 w, u16 h)
++{
++ int r;
++ u16 x1 = x;
++ u16 x2 = x + w - 1;
++ u16 y1 = y;
++ u16 y2 = y + h - 1;
++
++ u8 buf[5];
++ buf[0] = DCS_COLUMN_ADDR;
++ buf[1] = (x1 >> 8) & 0xff;
++ buf[2] = (x1 >> 0) & 0xff;
++ buf[3] = (x2 >> 8) & 0xff;
++ buf[4] = (x2 >> 0) & 0xff;
++
++ r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf));
++ if (r)
++ return r;
++
++ buf[0] = DCS_PAGE_ADDR;
++ buf[1] = (y1 >> 8) & 0xff;
++ buf[2] = (y1 >> 0) & 0xff;
++ buf[3] = (y2 >> 8) & 0xff;
++ buf[4] = (y2 >> 0) & 0xff;
++
++ r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf));
++ if (r)
++ return r;
++
++ dsi_vc_send_bta_sync(TCH);
++
++ return r;
++}
++
++static int taal_bl_update_status(struct backlight_device *dev)
++{
++ struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ int r;
++ int level;
++
++ if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
++ dev->props.power == FB_BLANK_UNBLANK)
++ level = dev->props.brightness;
++ else
++ level = 0;
++
++ dev_dbg(&dssdev->dev, "update brightness to %d\n", level);
++
++ if (td->use_dsi_bl) {
++ if (td->enabled) {
++ dsi_bus_lock();
++ r = taal_dcs_write_1(DCS_BRIGHTNESS, level);
++ dsi_bus_unlock();
++ if (r)
++ return r;
++ }
++ } else {
++ if (!dssdev->set_backlight)
++ return -EINVAL;
++
++ r = dssdev->set_backlight(dssdev, level);
++ if (r)
++ return r;
++ }
++
++ return 0;
++}
++
++static int taal_bl_get_intensity(struct backlight_device *dev)
++{
++ if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
++ dev->props.power == FB_BLANK_UNBLANK)
++ return dev->props.brightness;
++
++ return 0;
++}
++
++static struct backlight_ops taal_bl_ops = {
++ .get_brightness = taal_bl_get_intensity,
++ .update_status = taal_bl_update_status,
++};
++
++static void taal_get_timings(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings)
++{
++ *timings = dssdev->panel.timings;
++}
++
++static void taal_get_resolution(struct omap_dss_device *dssdev,
++ u16 *xres, u16 *yres)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++
++ if (td->rotate == 0 || td->rotate == 2) {
++ *xres = dssdev->panel.timings.x_res;
++ *yres = dssdev->panel.timings.y_res;
++ } else {
++ *yres = dssdev->panel.timings.x_res;
++ *xres = dssdev->panel.timings.y_res;
++ }
++}
++
++static irqreturn_t taal_te_isr(int irq, void *data)
++{
++ struct omap_dss_device *dssdev = data;
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++
++ complete_all(&td->te_completion);
++
++ return IRQ_HANDLED;
++}
++
++static ssize_t taal_num_errors_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ u8 errors;
++ int r;
++
++ if (td->enabled) {
++ dsi_bus_lock();
++ r = taal_dcs_read_1(DCS_READ_NUM_ERRORS, &errors);
++ dsi_bus_unlock();
++ } else {
++ r = -ENODEV;
++ }
++
++ if (r)
++ return r;
++
++ return snprintf(buf, PAGE_SIZE, "%d\n", errors);
++}
++
++static ssize_t taal_hw_revision_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ u8 id1, id2, id3;
++ int r;
++
++ if (td->enabled) {
++ dsi_bus_lock();
++ r = taal_get_id(&id1, &id2, &id3);
++ dsi_bus_unlock();
++ } else {
++ r = -ENODEV;
++ }
++
++ if (r)
++ return r;
++
++ return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
++}
++
++static const char *cabc_modes[] = {
++ "off", /* used also always when CABC is not supported */
++ "ui",
++ "still-image",
++ "moving-image",
++};
++
++static ssize_t show_cabc_mode(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ const char *mode_str;
++ int mode;
++ int len;
++
++ mode = td->cabc_mode;
++
++ mode_str = "unknown";
++ if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
++ mode_str = cabc_modes[mode];
++ len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
++
++ return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
++}
++
++static ssize_t store_cabc_mode(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
++ if (sysfs_streq(cabc_modes[i], buf))
++ break;
++ }
++
++ if (i == ARRAY_SIZE(cabc_modes))
++ return -EINVAL;
++
++ if (td->enabled) {
++ dsi_bus_lock();
++ if (!td->cabc_broken)
++ taal_dcs_write_1(DCS_WRITE_CABC, i);
++ dsi_bus_unlock();
++ }
++
++ td->cabc_mode = i;
++
++ return count;
++}
++
++static ssize_t show_cabc_available_modes(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ int len;
++ int i;
++
++ for (i = 0, len = 0;
++ len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
++ len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
++ i ? " " : "", cabc_modes[i],
++ i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
++
++ return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
++}
++
++static DEVICE_ATTR(num_dsi_errors, S_IRUGO, taal_num_errors_show, NULL);
++static DEVICE_ATTR(hw_revision, S_IRUGO, taal_hw_revision_show, NULL);
++static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
++ show_cabc_mode, store_cabc_mode);
++static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
++ show_cabc_available_modes, NULL);
++
++static struct attribute *taal_attrs[] = {
++ &dev_attr_num_dsi_errors.attr,
++ &dev_attr_hw_revision.attr,
++ &dev_attr_cabc_mode.attr,
++ &dev_attr_cabc_available_modes.attr,
++ NULL,
++};
++
++static struct attribute_group taal_attr_group = {
++ .attrs = taal_attrs,
++};
++
++static int taal_probe(struct omap_dss_device *dssdev)
++{
++ struct taal_data *td;
++ struct backlight_device *bldev;
++ int r;
++
++ const struct omap_video_timings taal_panel_timings = {
++ .x_res = 864,
++ .y_res = 480,
++ };
++
++ dev_dbg(&dssdev->dev, "probe\n");
++
++ dssdev->panel.config = OMAP_DSS_LCD_TFT;
++ dssdev->panel.timings = taal_panel_timings;
++ dssdev->ctrl.pixel_size = 24;
++
++ td = kzalloc(sizeof(*td), GFP_KERNEL);
++ if (!td) {
++ r = -ENOMEM;
++ goto err0;
++ }
++
++ dev_set_drvdata(&dssdev->dev, td);
++
++ dssdev->get_timings = taal_get_timings;
++ dssdev->get_resolution = taal_get_resolution;
++
++ /* if no platform set_backlight() defined, presume DSI backlight
++ * control */
++ if (!dssdev->set_backlight)
++ td->use_dsi_bl = true;
++
++ bldev = backlight_device_register("taal", &dssdev->dev, dssdev,
++ &taal_bl_ops);
++ if (IS_ERR(bldev)) {
++ r = PTR_ERR(bldev);
++ goto err1;
++ }
++
++ td->bldev = bldev;
++
++ bldev->props.fb_blank = FB_BLANK_UNBLANK;
++ bldev->props.power = FB_BLANK_UNBLANK;
++ if (td->use_dsi_bl) {
++ bldev->props.max_brightness = 255;
++ bldev->props.brightness = 255;
++ } else {
++ bldev->props.max_brightness = 127;
++ bldev->props.brightness = 127;
++ }
++
++ taal_bl_update_status(bldev);
++
++ if (dssdev->phy.dsi.ext_te) {
++ int gpio = dssdev->phy.dsi.ext_te_gpio;
++
++ r = gpio_request(gpio, "taal irq");
++ if (r) {
++ dev_err(&dssdev->dev, "GPIO request failed\n");
++ goto err2;
++ }
++
++ gpio_direction_input(gpio);
++
++ r = request_irq(gpio_to_irq(gpio), taal_te_isr,
++ IRQF_DISABLED | IRQF_TRIGGER_RISING,
++ "taal vsync", dssdev);
++
++ if (r) {
++ dev_err(&dssdev->dev, "IRQ request failed\n");
++ gpio_free(gpio);
++ goto err2;
++ }
++
++ init_completion(&td->te_completion);
++
++ td->use_ext_te = true;
++ }
++
++ r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group);
++ if (r) {
++ dev_err(&dssdev->dev, "failed to create sysfs files\n");
++ goto err3;
++ }
++
++ return 0;
++err3:
++ if (td->use_ext_te) {
++ int gpio = dssdev->phy.dsi.ext_te_gpio;
++ free_irq(gpio_to_irq(gpio), dssdev);
++ gpio_free(gpio);
++ }
++err2:
++ backlight_device_unregister(bldev);
++err1:
++ kfree(td);
++err0:
++ return r;
++}
++
++static void taal_remove(struct omap_dss_device *dssdev)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ struct backlight_device *bldev;
++
++ dev_dbg(&dssdev->dev, "remove\n");
++
++ sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
++
++ if (td->use_ext_te) {
++ int gpio = dssdev->phy.dsi.ext_te_gpio;
++ free_irq(gpio_to_irq(gpio), dssdev);
++ gpio_free(gpio);
++ }
++
++ bldev = td->bldev;
++ bldev->props.power = FB_BLANK_POWERDOWN;
++ taal_bl_update_status(bldev);
++ backlight_device_unregister(bldev);
++
++ kfree(td);
++}
++
++static int taal_enable(struct omap_dss_device *dssdev)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ u8 id1, id2, id3;
++ int r;
++
++ dev_dbg(&dssdev->dev, "enable\n");
++
++ if (dssdev->platform_enable) {
++ r = dssdev->platform_enable(dssdev);
++ if (r)
++ return r;
++ }
++
++ /* it seems we have to wait a bit until taal is ready */
++ msleep(5);
++
++ r = taal_sleep_out(td);
++ if (r)
++ return r;
++
++ r = taal_get_id(&id1, &id2, &id3);
++ if (r)
++ return r;
++
++ /* on early revisions CABC is broken */
++ if (id2 == 0x00 || id2 == 0xff || id2 == 0x81)
++ td->cabc_broken = true;
++
++ taal_dcs_write_1(DCS_BRIGHTNESS, 0xff);
++ taal_dcs_write_1(DCS_CTRL_DISPLAY, (1<<2) | (1<<5)); /* BL | BCTRL */
++
++ taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
++
++ taal_set_addr_mode(td->rotate, td->mirror);
++ if (!td->cabc_broken)
++ taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode);
++
++ taal_dcs_write_0(DCS_DISPLAY_ON);
++
++ td->enabled = 1;
++
++ if (!td->intro_printed) {
++ dev_info(&dssdev->dev, "revision %02x.%02x.%02x\n",
++ id1, id2, id3);
++ if (td->cabc_broken)
++ dev_info(&dssdev->dev,
++ "old Taal version, CABC disabled\n");
++ td->intro_printed = true;
++ }
++
++ return 0;
++}
++
++static void taal_disable(struct omap_dss_device *dssdev)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++
++ dev_dbg(&dssdev->dev, "disable\n");
++
++ taal_dcs_write_0(DCS_DISPLAY_OFF);
++ taal_sleep_in(td);
++
++ /* wait a bit so that the message goes through */
++ msleep(10);
++
++ if (dssdev->platform_disable)
++ dssdev->platform_disable(dssdev);
++
++ td->enabled = 0;
++}
++
++static int taal_suspend(struct omap_dss_device *dssdev)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ struct backlight_device *bldev = td->bldev;
++
++ bldev->props.power = FB_BLANK_POWERDOWN;
++ taal_bl_update_status(bldev);
++
++ return 0;
++}
++
++static int taal_resume(struct omap_dss_device *dssdev)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ struct backlight_device *bldev = td->bldev;
++
++ bldev->props.power = FB_BLANK_UNBLANK;
++ taal_bl_update_status(bldev);
++
++ return 0;
++}
++
++static void taal_setup_update(struct omap_dss_device *dssdev,
++ u16 x, u16 y, u16 w, u16 h)
++{
++ taal_set_update_window(x, y, w, h);
++}
++
++static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ int r;
++
++ td->te_enabled = enable;
++
++ if (enable)
++ r = taal_dcs_write_1(DCS_TEAR_ON, 0);
++ else
++ r = taal_dcs_write_0(DCS_TEAR_OFF);
++
++ return r;
++}
++
++static int taal_wait_te(struct omap_dss_device *dssdev)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ long wait = msecs_to_jiffies(500);
++
++ if (!td->use_ext_te || !td->te_enabled)
++ return 0;
++
++ INIT_COMPLETION(td->te_completion);
++ wait = wait_for_completion_timeout(&td->te_completion, wait);
++ if (wait == 0) {
++ dev_err(&dssdev->dev, "timeout waiting TE\n");
++ return -ETIME;
++ }
++
++ return 0;
++}
++
++static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ int r;
++
++ dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
++
++ if (td->enabled) {
++ r = taal_set_addr_mode(rotate, td->mirror);
++
++ if (r)
++ return r;
++ }
++
++ td->rotate = rotate;
++
++ return 0;
++}
++
++static u8 taal_get_rotate(struct omap_dss_device *dssdev)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ return td->rotate;
++}
++
++static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ int r;
++
++ dev_dbg(&dssdev->dev, "mirror %d\n", enable);
++
++ if (td->enabled) {
++ r = taal_set_addr_mode(td->rotate, enable);
++
++ if (r)
++ return r;
++ }
++
++ td->mirror = enable;
++
++ return 0;
++}
++
++static bool taal_get_mirror(struct omap_dss_device *dssdev)
++{
++ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
++ return td->mirror;
++}
++
++static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
++{
++ u8 id1, id2, id3;
++ int r;
++
++ r = taal_dcs_read_1(DCS_GET_ID1, &id1);
++ if (r)
++ return r;
++ r = taal_dcs_read_1(DCS_GET_ID2, &id2);
++ if (r)
++ return r;
++ r = taal_dcs_read_1(DCS_GET_ID3, &id3);
++ if (r)
++ return r;
++
++ return 0;
++}
++
++static int taal_memory_read(struct omap_dss_device *dssdev,
++ void *buf, size_t size,
++ u16 x, u16 y, u16 w, u16 h)
++{
++ int r;
++ int first = 1;
++ int plen;
++ unsigned buf_used = 0;
++
++ if (size < w * h * 3)
++ return -ENOMEM;
++
++ size = min(w * h * 3,
++ dssdev->panel.timings.x_res *
++ dssdev->panel.timings.y_res * 3);
++
++ /* plen 1 or 2 goes into short packet. until checksum error is fixed,
++ * use short packets. plen 32 works, but bigger packets seem to cause
++ * an error. */
++ if (size % 2)
++ plen = 1;
++ else
++ plen = 2;
++
++ taal_setup_update(dssdev, x, y, w, h);
++
++ r = dsi_vc_set_max_rx_packet_size(TCH, plen);
++ if (r)
++ return r;
++
++ while (buf_used < size) {
++ u8 dcs_cmd = first ? 0x2e : 0x3e;
++ first = 0;
++
++ r = dsi_vc_dcs_read(TCH, dcs_cmd,
++ buf + buf_used, size - buf_used);
++
++ if (r < 0) {
++ dev_err(&dssdev->dev, "read error\n");
++ goto err;
++ }
++
++ buf_used += r;
++
++ if (r < plen) {
++ dev_err(&dssdev->dev, "short read\n");
++ break;
++ }
++ }
++
++ r = buf_used;
++
++err:
++ dsi_vc_set_max_rx_packet_size(TCH, 1);
++
++ return r;
++}
++
++static struct omap_dss_driver taal_driver = {
++ .probe = taal_probe,
++ .remove = taal_remove,
++
++ .enable = taal_enable,
++ .disable = taal_disable,
++ .suspend = taal_suspend,
++ .resume = taal_resume,
++
++ .setup_update = taal_setup_update,
++ .enable_te = taal_enable_te,
++ .wait_for_te = taal_wait_te,
++ .set_rotate = taal_rotate,
++ .get_rotate = taal_get_rotate,
++ .set_mirror = taal_mirror,
++ .get_mirror = taal_get_mirror,
++ .run_test = taal_run_test,
++ .memory_read = taal_memory_read,
++
++ .driver = {
++ .name = "taal",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init taal_init(void)
++{
++ omap_dss_register_driver(&taal_driver);
++
++ return 0;
++}
++
++static void __exit taal_exit(void)
++{
++ omap_dss_unregister_driver(&taal_driver);
++}
++
++module_init(taal_init);
++module_exit(taal_exit);
++
++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
++MODULE_DESCRIPTION("Taal Driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
+new file mode 100644
+index 0000000..71d8dec
+--- /dev/null
++++ b/drivers/video/omap2/dss/Kconfig
+@@ -0,0 +1,89 @@
++menuconfig OMAP2_DSS
++ tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)"
++ depends on ARCH_OMAP2 || ARCH_OMAP3
++ help
++ OMAP2/3 Display Subsystem support.
++
++if OMAP2_DSS
++
++config OMAP2_VRAM_SIZE
++ int "VRAM size (MB)"
++ range 0 32
++ default 0
++ help
++ The amount of SDRAM to reserve at boot time for video RAM use.
++ This VRAM will be used by omapfb and other drivers that need
++ large continuous RAM area for video use.
++
++ You can also set this with "vram=<bytes>" kernel argument, or
++ in the board file.
++
++config OMAP2_DSS_DEBUG_SUPPORT
++ bool "Debug support"
++ default y
++ help
++ This enables debug messages. You need to enable printing
++ with 'debug' module parameter.
++
++config OMAP2_DSS_RFBI
++ bool "RFBI support"
++ default n
++ help
++ MIPI DBI, or RFBI (Remote Framebuffer Interface), support.
++
++config OMAP2_DSS_VENC
++ bool "VENC support"
++ default y
++ help
++ OMAP Video Encoder support.
++
++config OMAP2_DSS_SDI
++ bool "SDI support"
++ depends on ARCH_OMAP3
++ default n
++ help
++ SDI (Serial Display Interface) support.
++
++config OMAP2_DSS_DSI
++ bool "DSI support"
++ depends on ARCH_OMAP3
++ default n
++ help
++ MIPI DSI support.
++
++config OMAP2_DSS_USE_DSI_PLL
++ bool "Use DSI PLL for PCLK (EXPERIMENTAL)"
++ default n
++ depends on OMAP2_DSS_DSI
++ help
++ Use DSI PLL to generate pixel clock. Currently only for DPI output.
++ DSI PLL can be used to generate higher and more precise pixel clocks.
++
++config OMAP2_DSS_FAKE_VSYNC
++ bool "Fake VSYNC irq from manual update displays"
++ default n
++ help
++ If this is selected, DSI will generate a fake DISPC VSYNC interrupt
++ when DSI has sent a frame. This is only needed with DSI or RFBI
++ displays using manual mode, and you want VSYNC to, for example,
++ time animation.
++
++config OMAP2_DSS_MIN_FCK_PER_PCK
++ int "Minimum FCK/PCK ratio (for scaling)"
++ range 0 32
++ default 0
++ help
++ This can be used to adjust the minimum FCK/PCK ratio.
++
++ With this you can make sure that DISPC FCK is at least
++ n x PCK. Video plane scaling requires higher FCK than
++ normally.
++
++ If this is set to 0, there's no extra constraint on the
++ DISPC FCK. However, the FCK will at minimum be
++ 2xPCK (if active matrix) or 3xPCK (if passive matrix).
++
++ Max FCK is 173MHz, so this doesn't work if your PCK
++ is very high.
++
++endif
+diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
+new file mode 100644
+index 0000000..980c72c
+--- /dev/null
++++ b/drivers/video/omap2/dss/Makefile
+@@ -0,0 +1,6 @@
++obj-$(CONFIG_OMAP2_DSS) += omapdss.o
++omapdss-y := core.o dss.o dispc.o dpi.o display.o manager.o overlay.o
++omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
++omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
++omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
++omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
+diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
+new file mode 100644
+index 0000000..e8d430c
+--- /dev/null
++++ b/drivers/video/omap2/dss/core.c
+@@ -0,0 +1,917 @@
++/*
++ * linux/drivers/video/omap2/dss/core.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "CORE"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/seq_file.h>
++#include <linux/debugfs.h>
++#include <linux/io.h>
++#include <linux/device.h>
++
++#include <mach/display.h>
++#include <mach/clock.h>
++
++#include "dss.h"
++
++static struct {
++ struct platform_device *pdev;
++ int ctx_id;
++
++ struct clk *dss_ick;
++ struct clk *dss1_fck;
++ struct clk *dss2_fck;
++ struct clk *dss_54m_fck;
++ struct clk *dss_96m_fck;
++ unsigned num_clks_enabled;
++} core;
++
++static void dss_clk_enable_all_no_ctx(void);
++static void dss_clk_disable_all_no_ctx(void);
++static void dss_clk_enable_no_ctx(enum dss_clock clks);
++static void dss_clk_disable_no_ctx(enum dss_clock clks);
++
++static char *def_disp_name;
++module_param_named(def_disp, def_disp_name, charp, 0);
++MODULE_PARM_DESC(def_disp_name, "default display name");
++
++#ifdef DEBUG
++unsigned int dss_debug;
++module_param_named(debug, dss_debug, bool, 0644);
++#endif
++
++/* CONTEXT */
++static int dss_get_ctx_id(void)
++{
++ struct omap_dss_board_info *pdata = core.pdev->dev.platform_data;
++ int r;
++
++ if (!pdata->get_last_off_on_transaction_id)
++ return 0;
++ r = pdata->get_last_off_on_transaction_id(&core.pdev->dev);
++ if (r < 0) {
++ dev_err(&core.pdev->dev, "getting transaction ID failed, "
++ "will force context restore\n");
++ r = -1;
++ }
++ return r;
++}
++
++int dss_need_ctx_restore(void)
++{
++ int id = dss_get_ctx_id();
++
++ if (id < 0 || id != core.ctx_id) {
++ DSSDBG("ctx id %d -> id %d\n",
++ core.ctx_id, id);
++ core.ctx_id = id;
++ return 1;
++ } else {
++ return 0;
++ }
++}
++
++static void save_all_ctx(void)
++{
++ DSSDBG("save context\n");
++
++ dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ dss_save_context();
++ dispc_save_context();
++#ifdef CONFIG_OMAP2_DSS_DSI
++ dsi_save_context();
++#endif
++
++ dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1);
++}
++
++static void restore_all_ctx(void)
++{
++ DSSDBG("restore context\n");
++
++ dss_clk_enable_all_no_ctx();
++
++ dss_restore_context();
++ dispc_restore_context();
++#ifdef CONFIG_OMAP2_DSS_DSI
++ dsi_restore_context();
++#endif
++
++ dss_clk_disable_all_no_ctx();
++}
++
++/* CLOCKS */
++void dss_dump_clocks(struct seq_file *s)
++{
++ int i;
++ struct clk *clocks[5] = {
++ core.dss_ick,
++ core.dss1_fck,
++ core.dss2_fck,
++ core.dss_54m_fck,
++ core.dss_96m_fck
++ };
++
++ seq_printf(s, "- dss -\n");
++
++ seq_printf(s, "internal clk count\t%u\n", core.num_clks_enabled);
++
++ for (i = 0; i < 5; i++) {
++ if (!clocks[i])
++ continue;
++ seq_printf(s, "%-15s\t%lu\t%d\n",
++ clocks[i]->name,
++ clk_get_rate(clocks[i]),
++ clocks[i]->usecount);
++ }
++}
++
++static int dss_get_clock(struct clk **clock, const char *clk_name)
++{
++ struct clk *clk;
++
++ clk = clk_get(&core.pdev->dev, clk_name);
++
++ if (IS_ERR(clk)) {
++ DSSERR("can't get clock %s", clk_name);
++ return PTR_ERR(clk);
++ }
++
++ *clock = clk;
++
++ DSSDBG("clk %s, rate %ld\n", clk_name, clk_get_rate(clk));
++
++ return 0;
++}
++
++static int dss_get_clocks(void)
++{
++ int r;
++
++ core.dss_ick = NULL;
++ core.dss1_fck = NULL;
++ core.dss2_fck = NULL;
++ core.dss_54m_fck = NULL;
++ core.dss_96m_fck = NULL;
++
++ r = dss_get_clock(&core.dss_ick, "ick");
++ if (r)
++ goto err;
++
++ r = dss_get_clock(&core.dss1_fck, "dss1_fck");
++ if (r)
++ goto err;
++
++ r = dss_get_clock(&core.dss2_fck, "dss2_fck");
++ if (r)
++ goto err;
++
++ r = dss_get_clock(&core.dss_54m_fck, "tv_fck");
++ if (r)
++ goto err;
++
++ r = dss_get_clock(&core.dss_96m_fck, "video_fck");
++ if (r)
++ goto err;
++
++ return 0;
++
++err:
++ if (core.dss_ick)
++ clk_put(core.dss_ick);
++ if (core.dss1_fck)
++ clk_put(core.dss1_fck);
++ if (core.dss2_fck)
++ clk_put(core.dss2_fck);
++ if (core.dss_54m_fck)
++ clk_put(core.dss_54m_fck);
++ if (core.dss_96m_fck)
++ clk_put(core.dss_96m_fck);
++
++ return r;
++}
++
++static void dss_put_clocks(void)
++{
++ if (core.dss_96m_fck)
++ clk_put(core.dss_96m_fck);
++ clk_put(core.dss_54m_fck);
++ clk_put(core.dss1_fck);
++ clk_put(core.dss2_fck);
++ clk_put(core.dss_ick);
++}
++
++unsigned long dss_clk_get_rate(enum dss_clock clk)
++{
++ switch (clk) {
++ case DSS_CLK_ICK:
++ return clk_get_rate(core.dss_ick);
++ case DSS_CLK_FCK1:
++ return clk_get_rate(core.dss1_fck);
++ case DSS_CLK_FCK2:
++ return clk_get_rate(core.dss2_fck);
++ case DSS_CLK_54M:
++ return clk_get_rate(core.dss_54m_fck);
++ case DSS_CLK_96M:
++ return clk_get_rate(core.dss_96m_fck);
++ }
++
++ BUG();
++ return 0;
++}
++
++static unsigned count_clk_bits(enum dss_clock clks)
++{
++ unsigned num_clks = 0;
++
++ if (clks & DSS_CLK_ICK)
++ ++num_clks;
++ if (clks & DSS_CLK_FCK1)
++ ++num_clks;
++ if (clks & DSS_CLK_FCK2)
++ ++num_clks;
++ if (clks & DSS_CLK_54M)
++ ++num_clks;
++ if (clks & DSS_CLK_96M)
++ ++num_clks;
++
++ return num_clks;
++}
++
++static void dss_clk_enable_no_ctx(enum dss_clock clks)
++{
++ unsigned num_clks = count_clk_bits(clks);
++
++ if (clks & DSS_CLK_ICK)
++ clk_enable(core.dss_ick);
++ if (clks & DSS_CLK_FCK1)
++ clk_enable(core.dss1_fck);
++ if (clks & DSS_CLK_FCK2)
++ clk_enable(core.dss2_fck);
++ if (clks & DSS_CLK_54M)
++ clk_enable(core.dss_54m_fck);
++ if (clks & DSS_CLK_96M)
++ clk_enable(core.dss_96m_fck);
++
++ core.num_clks_enabled += num_clks;
++}
++
++void dss_clk_enable(enum dss_clock clks)
++{
++ dss_clk_enable_no_ctx(clks);
++
++ if (cpu_is_omap34xx() && dss_need_ctx_restore())
++ restore_all_ctx();
++}
++
++static void dss_clk_disable_no_ctx(enum dss_clock clks)
++{
++ unsigned num_clks = count_clk_bits(clks);
++
++ if (clks & DSS_CLK_ICK)
++ clk_disable(core.dss_ick);
++ if (clks & DSS_CLK_FCK1)
++ clk_disable(core.dss1_fck);
++ if (clks & DSS_CLK_FCK2)
++ clk_disable(core.dss2_fck);
++ if (clks & DSS_CLK_54M)
++ clk_disable(core.dss_54m_fck);
++ if (clks & DSS_CLK_96M)
++ clk_disable(core.dss_96m_fck);
++
++ core.num_clks_enabled -= num_clks;
++}
++
++void dss_clk_disable(enum dss_clock clks)
++{
++ if (cpu_is_omap34xx()) {
++ unsigned num_clks = count_clk_bits(clks);
++
++ BUG_ON(core.num_clks_enabled < num_clks);
++
++ if (core.num_clks_enabled == num_clks)
++ save_all_ctx();
++ }
++
++ dss_clk_disable_no_ctx(clks);
++}
++
++static void dss_clk_enable_all_no_ctx(void)
++{
++ enum dss_clock clks;
++
++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
++ if (cpu_is_omap34xx())
++ clks |= DSS_CLK_96M;
++ dss_clk_enable_no_ctx(clks);
++}
++
++static void dss_clk_disable_all_no_ctx(void)
++{
++ enum dss_clock clks;
++
++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
++ if (cpu_is_omap34xx())
++ clks |= DSS_CLK_96M;
++ dss_clk_disable_no_ctx(clks);
++}
++
++static void dss_clk_disable_all(void)
++{
++ enum dss_clock clks;
++
++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
++ if (cpu_is_omap34xx())
++ clks |= DSS_CLK_96M;
++ dss_clk_disable(clks);
++}
++
++/* DEBUGFS */
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
++static void dss_debug_dump_clocks(struct seq_file *s)
++{
++ dss_dump_clocks(s);
++ dispc_dump_clocks(s);
++#ifdef CONFIG_OMAP2_DSS_DSI
++ dsi_dump_clocks(s);
++#endif
++}
++
++static int dss_debug_show(struct seq_file *s, void *unused)
++{
++ void (*func)(struct seq_file *) = s->private;
++ func(s);
++ return 0;
++}
++
++static int dss_debug_open(struct inode *inode, struct file *file)
++{
++ return single_open(file, dss_debug_show, inode->i_private);
++}
++
++static const struct file_operations dss_debug_fops = {
++ .open = dss_debug_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++static struct dentry *dss_debugfs_dir;
++
++static int dss_initialize_debugfs(void)
++{
++ dss_debugfs_dir = debugfs_create_dir("omapdss", NULL);
++ if (IS_ERR(dss_debugfs_dir)) {
++ int err = PTR_ERR(dss_debugfs_dir);
++ dss_debugfs_dir = NULL;
++ return err;
++ }
++
++ debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir,
++ &dss_debug_dump_clocks, &dss_debug_fops);
++
++ debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir,
++ &dss_dump_regs, &dss_debug_fops);
++ debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir,
++ &dispc_dump_regs, &dss_debug_fops);
++#ifdef CONFIG_OMAP2_DSS_RFBI
++ debugfs_create_file("rfbi", S_IRUGO, dss_debugfs_dir,
++ &rfbi_dump_regs, &dss_debug_fops);
++#endif
++#ifdef CONFIG_OMAP2_DSS_DSI
++ debugfs_create_file("dsi", S_IRUGO, dss_debugfs_dir,
++ &dsi_dump_regs, &dss_debug_fops);
++#endif
++#ifdef CONFIG_OMAP2_DSS_VENC
++ debugfs_create_file("venc", S_IRUGO, dss_debugfs_dir,
++ &venc_dump_regs, &dss_debug_fops);
++#endif
++ return 0;
++}
++
++static void dss_uninitialize_debugfs(void)
++{
++ if (dss_debugfs_dir)
++ debugfs_remove_recursive(dss_debugfs_dir);
++}
++#endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
++
++/* PLATFORM DEVICE */
++static int omap_dss_probe(struct platform_device *pdev)
++{
++ struct omap_dss_board_info *pdata = pdev->dev.platform_data;
++ int skip_init = 0;
++ int r;
++ int i;
++
++ core.pdev = pdev;
++
++ dss_init_overlay_managers(pdev);
++ dss_init_overlays(pdev);
++
++ r = dss_get_clocks();
++ if (r)
++ goto fail0;
++
++ dss_clk_enable_all_no_ctx();
++
++ core.ctx_id = dss_get_ctx_id();
++ DSSDBG("initial ctx id %u\n", core.ctx_id);
++
++#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
++ /* DISPC_CONTROL */
++ if (omap_readl(0x48050440) & 1) /* LCD enabled? */
++ skip_init = 1;
++#endif
++
++ r = dss_init(skip_init);
++ if (r) {
++ DSSERR("Failed to initialize DSS\n");
++ goto fail0;
++ }
++
++#ifdef CONFIG_OMAP2_DSS_RFBI
++ r = rfbi_init();
++ if (r) {
++ DSSERR("Failed to initialize rfbi\n");
++ goto fail0;
++ }
++#endif
++
++ r = dpi_init();
++ if (r) {
++ DSSERR("Failed to initialize dpi\n");
++ goto fail0;
++ }
++
++ r = dispc_init();
++ if (r) {
++ DSSERR("Failed to initialize dispc\n");
++ goto fail0;
++ }
++#ifdef CONFIG_OMAP2_DSS_VENC
++ r = venc_init(pdev);
++ if (r) {
++ DSSERR("Failed to initialize venc\n");
++ goto fail0;
++ }
++#endif
++ if (cpu_is_omap34xx()) {
++#ifdef CONFIG_OMAP2_DSS_SDI
++ r = sdi_init(skip_init);
++ if (r) {
++ DSSERR("Failed to initialize SDI\n");
++ goto fail0;
++ }
++#endif
++#ifdef CONFIG_OMAP2_DSS_DSI
++ r = dsi_init(pdev);
++ if (r) {
++ DSSERR("Failed to initialize DSI\n");
++ goto fail0;
++ }
++#endif
++ }
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
++ r = dss_initialize_debugfs();
++ if (r)
++ goto fail0;
++#endif
++
++ for (i = 0; i < pdata->num_devices; ++i) {
++ struct omap_dss_device *dssdev = pdata->devices[i];
++
++ r = omap_dss_register_device(dssdev);
++ if (r)
++ DSSERR("device reg failed %d\n", i);
++
++ if (def_disp_name && strcmp(def_disp_name, dssdev->name) == 0)
++ pdata->default_device = dssdev;
++ }
++
++ dss_clk_disable_all();
++
++ return 0;
++
++ /* XXX fail correctly */
++fail0:
++ return r;
++}
++
++static int omap_dss_remove(struct platform_device *pdev)
++{
++ struct omap_dss_board_info *pdata = pdev->dev.platform_data;
++ int i;
++ int c;
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
++ dss_uninitialize_debugfs();
++#endif
++
++#ifdef CONFIG_OMAP2_DSS_VENC
++ venc_exit();
++#endif
++ dispc_exit();
++ dpi_exit();
++#ifdef CONFIG_OMAP2_DSS_RFBI
++ rfbi_exit();
++#endif
++ if (cpu_is_omap34xx()) {
++#ifdef CONFIG_OMAP2_DSS_DSI
++ dsi_exit();
++#endif
++#ifdef CONFIG_OMAP2_DSS_SDI
++ sdi_exit();
++#endif
++ }
++
++ dss_exit();
++
++ /* these should be removed at some point */
++ c = core.dss_ick->usecount;
++ if (c > 0) {
++ DSSERR("warning: dss_ick usecount %d, disabling\n", c);
++ while (c-- > 0)
++ clk_disable(core.dss_ick);
++ }
++
++ c = core.dss1_fck->usecount;
++ if (c > 0) {
++ DSSERR("warning: dss1_fck usecount %d, disabling\n", c);
++ while (c-- > 0)
++ clk_disable(core.dss1_fck);
++ }
++
++ c = core.dss2_fck->usecount;
++ if (c > 0) {
++ DSSERR("warning: dss2_fck usecount %d, disabling\n", c);
++ while (c-- > 0)
++ clk_disable(core.dss2_fck);
++ }
++
++ c = core.dss_54m_fck->usecount;
++ if (c > 0) {
++ DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c);
++ while (c-- > 0)
++ clk_disable(core.dss_54m_fck);
++ }
++
++ if (core.dss_96m_fck) {
++ c = core.dss_96m_fck->usecount;
++ if (c > 0) {
++ DSSERR("warning: dss_96m_fck usecount %d, disabling\n",
++ c);
++ while (c-- > 0)
++ clk_disable(core.dss_96m_fck);
++ }
++ }
++
++ dss_put_clocks();
++
++ dss_uninit_overlays(pdev);
++ dss_uninit_overlay_managers(pdev);
++
++ for (i = 0; i < pdata->num_devices; ++i)
++ omap_dss_unregister_device(pdata->devices[i]);
++
++ return 0;
++}
++
++static void omap_dss_shutdown(struct platform_device *pdev)
++{
++ DSSDBG("shutdown\n");
++}
++
++static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state)
++{
++ DSSDBG("suspend %d\n", state.event);
++
++ return dss_suspend_all_devices();
++}
++
++static int omap_dss_resume(struct platform_device *pdev)
++{
++ DSSDBG("resume\n");
++
++ return dss_resume_all_devices();
++}
++
++static struct platform_driver omap_dss_driver = {
++ .probe = omap_dss_probe,
++ .remove = omap_dss_remove,
++ .shutdown = omap_dss_shutdown,
++ .suspend = omap_dss_suspend,
++ .resume = omap_dss_resume,
++ .driver = {
++ .name = "omapdss",
++ .owner = THIS_MODULE,
++ },
++};
++
++/* BUS */
++static int dss_bus_match(struct device *dev, struct device_driver *driver)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++
++ DSSDBG("bus_match. dev %s/%s, drv %s\n",
++ dev_name(dev), dssdev->driver_name, driver->name);
++
++ return strcmp(dssdev->driver_name, driver->name) == 0;
++}
++
++static ssize_t device_name_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ return snprintf(buf, PAGE_SIZE, "%s\n",
++ dssdev->name ?
++ dssdev->name : "");
++}
++
++static struct device_attribute default_dev_attrs[] = {
++ __ATTR(name, S_IRUGO, device_name_show, NULL),
++ __ATTR_NULL,
++};
++
++static ssize_t driver_name_show(struct device_driver *drv, char *buf)
++{
++ struct omap_dss_driver *dssdrv = to_dss_driver(drv);
++ return snprintf(buf, PAGE_SIZE, "%s\n",
++ dssdrv->driver.name ?
++ dssdrv->driver.name : "");
++}
++static struct driver_attribute default_drv_attrs[] = {
++ __ATTR(name, S_IRUGO, driver_name_show, NULL),
++ __ATTR_NULL,
++};
++
++static struct bus_type dss_bus_type = {
++ .name = "omapdss",
++ .match = dss_bus_match,
++ .dev_attrs = default_dev_attrs,
++ .drv_attrs = default_drv_attrs,
++};
++
++static void dss_bus_release(struct device *dev)
++{
++ DSSDBG("bus_release\n");
++}
++
++static struct device dss_bus = {
++ .release = dss_bus_release,
++};
++
++struct bus_type *dss_get_bus(void)
++{
++ return &dss_bus_type;
++}
++
++/* DRIVER */
++static int dss_driver_probe(struct device *dev)
++{
++ int r;
++ struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver);
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ struct omap_dss_board_info *pdata = core.pdev->dev.platform_data;
++ bool force;
++
++ DSSDBG("driver_probe: dev %s/%s, drv %s\n",
++ dev_name(dev), dssdev->driver_name,
++ dssdrv->driver.name);
++
++ dss_init_device(core.pdev, dssdev);
++
++ /* skip this if the device is behind a ctrl */
++ if (!dssdev->panel.ctrl) {
++ force = pdata->default_device == dssdev;
++ dss_recheck_connections(dssdev, force);
++ }
++
++ r = dssdrv->probe(dssdev);
++
++ if (r) {
++ DSSERR("driver probe failed: %d\n", r);
++ return r;
++ }
++
++ DSSDBG("probe done for device %s\n", dev_name(dev));
++
++ dssdev->driver = dssdrv;
++
++ return 0;
++}
++
++static int dss_driver_remove(struct device *dev)
++{
++ struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver);
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++
++ DSSDBG("driver_remove: dev %s/%s\n", dev_name(dev),
++ dssdev->driver_name);
++
++ dssdrv->remove(dssdev);
++
++ dss_uninit_device(core.pdev, dssdev);
++
++ dssdev->driver = NULL;
++
++ return 0;
++}
++
++int omap_dss_register_driver(struct omap_dss_driver *dssdriver)
++{
++ dssdriver->driver.bus = &dss_bus_type;
++ dssdriver->driver.probe = dss_driver_probe;
++ dssdriver->driver.remove = dss_driver_remove;
++ return driver_register(&dssdriver->driver);
++}
++EXPORT_SYMBOL(omap_dss_register_driver);
++
++void omap_dss_unregister_driver(struct omap_dss_driver *dssdriver)
++{
++ driver_unregister(&dssdriver->driver);
++}
++EXPORT_SYMBOL(omap_dss_unregister_driver);
++
++/* DEVICE */
++static void reset_device(struct device *dev, int check)
++{
++ u8 *dev_p = (u8 *)dev;
++ u8 *dev_end = dev_p + sizeof(*dev);
++ void *saved_pdata;
++
++ saved_pdata = dev->platform_data;
++ if (check) {
++ /*
++ * Check if there is any other setting than platform_data
++ * in struct device; warn that these will be reset by our
++ * init.
++ */
++ dev->platform_data = NULL;
++ while (dev_p < dev_end) {
++ if (*dev_p) {
++ WARN("%s: struct device fields will be "
++ "discarded\n",
++ __func__);
++ break;
++ }
++ dev_p++;
++ }
++ }
++ memset(dev, 0, sizeof(*dev));
++ dev->platform_data = saved_pdata;
++}
++
++
++static void omap_dss_dev_release(struct device *dev)
++{
++ reset_device(dev, 0);
++}
++
++int omap_dss_register_device(struct omap_dss_device *dssdev)
++{
++ static int dev_num;
++ static int panel_num;
++ int r;
++
++ WARN_ON(!dssdev->driver_name);
++
++ reset_device(&dssdev->dev, 1);
++ dssdev->dev.bus = &dss_bus_type;
++ dssdev->dev.parent = &dss_bus;
++ dssdev->dev.release = omap_dss_dev_release;
++ dev_set_name(&dssdev->dev, "display%d", dev_num++);
++ r = device_register(&dssdev->dev);
++ if (r)
++ return r;
++
++ if (dssdev->ctrl.panel) {
++ struct omap_dss_device *panel = dssdev->ctrl.panel;
++
++ panel->panel.ctrl = dssdev;
++
++ reset_device(&panel->dev, 1);
++ panel->dev.bus = &dss_bus_type;
++ panel->dev.parent = &dssdev->dev;
++ panel->dev.release = omap_dss_dev_release;
++ dev_set_name(&panel->dev, "panel%d", panel_num++);
++ r = device_register(&panel->dev);
++ if (r)
++ return r;
++ }
++
++ return 0;
++}
++
++void omap_dss_unregister_device(struct omap_dss_device *dssdev)
++{
++ device_unregister(&dssdev->dev);
++
++ if (dssdev->ctrl.panel) {
++ struct omap_dss_device *panel = dssdev->ctrl.panel;
++ device_unregister(&panel->dev);
++ }
++}
++
++/* BUS */
++static int omap_dss_bus_register(void)
++{
++ int r;
++
++ r = bus_register(&dss_bus_type);
++ if (r) {
++ DSSERR("bus register failed\n");
++ return r;
++ }
++
++ dev_set_name(&dss_bus, "omapdss");
++ r = device_register(&dss_bus);
++ if (r) {
++ DSSERR("bus driver register failed\n");
++ bus_unregister(&dss_bus_type);
++ return r;
++ }
++
++ return 0;
++}
++
++/* INIT */
++
++#ifdef CONFIG_OMAP2_DSS_MODULE
++static void omap_dss_bus_unregister(void)
++{
++ device_unregister(&dss_bus);
++
++ bus_unregister(&dss_bus_type);
++}
++
++static int __init omap_dss_init(void)
++{
++ int r;
++
++ r = omap_dss_bus_register();
++ if (r)
++ return r;
++
++ r = platform_driver_register(&omap_dss_driver);
++ if (r) {
++ omap_dss_bus_unregister();
++ return r;
++ }
++
++ return 0;
++}
++
++static void __exit omap_dss_exit(void)
++{
++ platform_driver_unregister(&omap_dss_driver);
++
++ omap_dss_bus_unregister();
++}
++
++module_init(omap_dss_init);
++module_exit(omap_dss_exit);
++#else
++static int __init omap_dss_init(void)
++{
++ return omap_dss_bus_register();
++}
++
++static int __init omap_dss_init2(void)
++{
++ return platform_driver_register(&omap_dss_driver);
++}
++
++core_initcall(omap_dss_init);
++device_initcall(omap_dss_init2);
++#endif
++
++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
++MODULE_DESCRIPTION("OMAP2/3 Display Subsystem");
++MODULE_LICENSE("GPL v2");
++
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+new file mode 100644
+index 0000000..d648475
+--- /dev/null
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -0,0 +1,3182 @@
++/*
++ * linux/drivers/video/omap2/dss/dispc.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "DISPC"
++
++#include <linux/kernel.h>
++#include <linux/dma-mapping.h>
++#include <linux/vmalloc.h>
++#include <linux/clk.h>
++#include <linux/io.h>
++#include <linux/jiffies.h>
++#include <linux/seq_file.h>
++#include <linux/delay.h>
++#include <linux/workqueue.h>
++
++#include <mach/sram.h>
++#include <mach/board.h>
++#include <mach/clock.h>
++
++#include <mach/display.h>
++
++#include "dss.h"
++
++/* DISPC */
++#define DISPC_BASE 0x48050400
++
++#define DISPC_SZ_REGS SZ_1K
++
++struct dispc_reg { u16 idx; };
++
++#define DISPC_REG(idx) ((const struct dispc_reg) { idx })
++
++/* DISPC common */
++#define DISPC_REVISION DISPC_REG(0x0000)
++#define DISPC_SYSCONFIG DISPC_REG(0x0010)
++#define DISPC_SYSSTATUS DISPC_REG(0x0014)
++#define DISPC_IRQSTATUS DISPC_REG(0x0018)
++#define DISPC_IRQENABLE DISPC_REG(0x001C)
++#define DISPC_CONTROL DISPC_REG(0x0040)
++#define DISPC_CONFIG DISPC_REG(0x0044)
++#define DISPC_CAPABLE DISPC_REG(0x0048)
++#define DISPC_DEFAULT_COLOR0 DISPC_REG(0x004C)
++#define DISPC_DEFAULT_COLOR1 DISPC_REG(0x0050)
++#define DISPC_TRANS_COLOR0 DISPC_REG(0x0054)
++#define DISPC_TRANS_COLOR1 DISPC_REG(0x0058)
++#define DISPC_LINE_STATUS DISPC_REG(0x005C)
++#define DISPC_LINE_NUMBER DISPC_REG(0x0060)
++#define DISPC_TIMING_H DISPC_REG(0x0064)
++#define DISPC_TIMING_V DISPC_REG(0x0068)
++#define DISPC_POL_FREQ DISPC_REG(0x006C)
++#define DISPC_DIVISOR DISPC_REG(0x0070)
++#define DISPC_GLOBAL_ALPHA DISPC_REG(0x0074)
++#define DISPC_SIZE_DIG DISPC_REG(0x0078)
++#define DISPC_SIZE_LCD DISPC_REG(0x007C)
++
++/* DISPC GFX plane */
++#define DISPC_GFX_BA0 DISPC_REG(0x0080)
++#define DISPC_GFX_BA1 DISPC_REG(0x0084)
++#define DISPC_GFX_POSITION DISPC_REG(0x0088)
++#define DISPC_GFX_SIZE DISPC_REG(0x008C)
++#define DISPC_GFX_ATTRIBUTES DISPC_REG(0x00A0)
++#define DISPC_GFX_FIFO_THRESHOLD DISPC_REG(0x00A4)
++#define DISPC_GFX_FIFO_SIZE_STATUS DISPC_REG(0x00A8)
++#define DISPC_GFX_ROW_INC DISPC_REG(0x00AC)
++#define DISPC_GFX_PIXEL_INC DISPC_REG(0x00B0)
++#define DISPC_GFX_WINDOW_SKIP DISPC_REG(0x00B4)
++#define DISPC_GFX_TABLE_BA DISPC_REG(0x00B8)
++
++#define DISPC_DATA_CYCLE1 DISPC_REG(0x01D4)
++#define DISPC_DATA_CYCLE2 DISPC_REG(0x01D8)
++#define DISPC_DATA_CYCLE3 DISPC_REG(0x01DC)
++
++#define DISPC_CPR_COEF_R DISPC_REG(0x0220)
++#define DISPC_CPR_COEF_G DISPC_REG(0x0224)
++#define DISPC_CPR_COEF_B DISPC_REG(0x0228)
++
++#define DISPC_GFX_PRELOAD DISPC_REG(0x022C)
++
++/* DISPC Video plane, n = 0 for VID1 and n = 1 for VID2 */
++#define DISPC_VID_REG(n, idx) DISPC_REG(0x00BC + (n)*0x90 + idx)
++
++#define DISPC_VID_BA0(n) DISPC_VID_REG(n, 0x0000)
++#define DISPC_VID_BA1(n) DISPC_VID_REG(n, 0x0004)
++#define DISPC_VID_POSITION(n) DISPC_VID_REG(n, 0x0008)
++#define DISPC_VID_SIZE(n) DISPC_VID_REG(n, 0x000C)
++#define DISPC_VID_ATTRIBUTES(n) DISPC_VID_REG(n, 0x0010)
++#define DISPC_VID_FIFO_THRESHOLD(n) DISPC_VID_REG(n, 0x0014)
++#define DISPC_VID_FIFO_SIZE_STATUS(n) DISPC_VID_REG(n, 0x0018)
++#define DISPC_VID_ROW_INC(n) DISPC_VID_REG(n, 0x001C)
++#define DISPC_VID_PIXEL_INC(n) DISPC_VID_REG(n, 0x0020)
++#define DISPC_VID_FIR(n) DISPC_VID_REG(n, 0x0024)
++#define DISPC_VID_PICTURE_SIZE(n) DISPC_VID_REG(n, 0x0028)
++#define DISPC_VID_ACCU0(n) DISPC_VID_REG(n, 0x002C)
++#define DISPC_VID_ACCU1(n) DISPC_VID_REG(n, 0x0030)
++
++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
++#define DISPC_VID_FIR_COEF_H(n, i) DISPC_REG(0x00F0 + (n)*0x90 + (i)*0x8)
++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
++#define DISPC_VID_FIR_COEF_HV(n, i) DISPC_REG(0x00F4 + (n)*0x90 + (i)*0x8)
++/* coef index i = {0, 1, 2, 3, 4} */
++#define DISPC_VID_CONV_COEF(n, i) DISPC_REG(0x0130 + (n)*0x90 + (i)*0x4)
++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
++#define DISPC_VID_FIR_COEF_V(n, i) DISPC_REG(0x01E0 + (n)*0x20 + (i)*0x4)
++
++#define DISPC_VID_PRELOAD(n) DISPC_REG(0x230 + (n)*0x04)
++
++
++#define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \
++ DISPC_IRQ_OCP_ERR | \
++ DISPC_IRQ_VID1_FIFO_UNDERFLOW | \
++ DISPC_IRQ_VID2_FIFO_UNDERFLOW | \
++ DISPC_IRQ_SYNC_LOST | \
++ DISPC_IRQ_SYNC_LOST_DIGIT)
++
++#define DISPC_MAX_NR_ISRS 8
++
++struct omap_dispc_isr_data {
++ omap_dispc_isr_t isr;
++ void *arg;
++ u32 mask;
++};
++
++#define REG_GET(idx, start, end) \
++ FLD_GET(dispc_read_reg(idx), start, end)
++
++#define REG_FLD_MOD(idx, val, start, end) \
++ dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end))
++
++static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES,
++ DISPC_VID_ATTRIBUTES(0),
++ DISPC_VID_ATTRIBUTES(1) };
++
++static struct {
++ void __iomem *base;
++
++ struct clk *dpll4_m4_ck;
++
++ unsigned long cache_req_pck;
++ unsigned long cache_prate;
++ struct dispc_clock_info cache_cinfo;
++
++ u32 fifo_size[3];
++
++ spinlock_t irq_lock;
++ u32 irq_error_mask;
++ struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS];
++ u32 error_irqs;
++ struct work_struct error_work;
++
++ u32 ctx[DISPC_SZ_REGS / sizeof(u32)];
++} dispc;
++
++static void _omap_dispc_set_irqs(void);
++
++static inline void dispc_write_reg(const struct dispc_reg idx, u32 val)
++{
++ __raw_writel(val, dispc.base + idx.idx);
++}
++
++static inline u32 dispc_read_reg(const struct dispc_reg idx)
++{
++ return __raw_readl(dispc.base + idx.idx);
++}
++
++#define SR(reg) \
++ dispc.ctx[(DISPC_##reg).idx / sizeof(u32)] = dispc_read_reg(DISPC_##reg)
++#define RR(reg) \
++ dispc_write_reg(DISPC_##reg, dispc.ctx[(DISPC_##reg).idx / sizeof(u32)])
++
++void dispc_save_context(void)
++{
++ if (cpu_is_omap24xx())
++ return;
++
++ SR(SYSCONFIG);
++ SR(IRQENABLE);
++ SR(CONTROL);
++ SR(CONFIG);
++ SR(DEFAULT_COLOR0);
++ SR(DEFAULT_COLOR1);
++ SR(TRANS_COLOR0);
++ SR(TRANS_COLOR1);
++ SR(LINE_NUMBER);
++ SR(TIMING_H);
++ SR(TIMING_V);
++ SR(POL_FREQ);
++ SR(DIVISOR);
++ SR(GLOBAL_ALPHA);
++ SR(SIZE_DIG);
++ SR(SIZE_LCD);
++
++ SR(GFX_BA0);
++ SR(GFX_BA1);
++ SR(GFX_POSITION);
++ SR(GFX_SIZE);
++ SR(GFX_ATTRIBUTES);
++ SR(GFX_FIFO_THRESHOLD);
++ SR(GFX_ROW_INC);
++ SR(GFX_PIXEL_INC);
++ SR(GFX_WINDOW_SKIP);
++ SR(GFX_TABLE_BA);
++
++ SR(DATA_CYCLE1);
++ SR(DATA_CYCLE2);
++ SR(DATA_CYCLE3);
++
++ SR(CPR_COEF_R);
++ SR(CPR_COEF_G);
++ SR(CPR_COEF_B);
++
++ SR(GFX_PRELOAD);
++
++ /* VID1 */
++ SR(VID_BA0(0));
++ SR(VID_BA1(0));
++ SR(VID_POSITION(0));
++ SR(VID_SIZE(0));
++ SR(VID_ATTRIBUTES(0));
++ SR(VID_FIFO_THRESHOLD(0));
++ SR(VID_ROW_INC(0));
++ SR(VID_PIXEL_INC(0));
++ SR(VID_FIR(0));
++ SR(VID_PICTURE_SIZE(0));
++ SR(VID_ACCU0(0));
++ SR(VID_ACCU1(0));
++
++ SR(VID_FIR_COEF_H(0, 0));
++ SR(VID_FIR_COEF_H(0, 1));
++ SR(VID_FIR_COEF_H(0, 2));
++ SR(VID_FIR_COEF_H(0, 3));
++ SR(VID_FIR_COEF_H(0, 4));
++ SR(VID_FIR_COEF_H(0, 5));
++ SR(VID_FIR_COEF_H(0, 6));
++ SR(VID_FIR_COEF_H(0, 7));
++
++ SR(VID_FIR_COEF_HV(0, 0));
++ SR(VID_FIR_COEF_HV(0, 1));
++ SR(VID_FIR_COEF_HV(0, 2));
++ SR(VID_FIR_COEF_HV(0, 3));
++ SR(VID_FIR_COEF_HV(0, 4));
++ SR(VID_FIR_COEF_HV(0, 5));
++ SR(VID_FIR_COEF_HV(0, 6));
++ SR(VID_FIR_COEF_HV(0, 7));
++
++ SR(VID_CONV_COEF(0, 0));
++ SR(VID_CONV_COEF(0, 1));
++ SR(VID_CONV_COEF(0, 2));
++ SR(VID_CONV_COEF(0, 3));
++ SR(VID_CONV_COEF(0, 4));
++
++ SR(VID_FIR_COEF_V(0, 0));
++ SR(VID_FIR_COEF_V(0, 1));
++ SR(VID_FIR_COEF_V(0, 2));
++ SR(VID_FIR_COEF_V(0, 3));
++ SR(VID_FIR_COEF_V(0, 4));
++ SR(VID_FIR_COEF_V(0, 5));
++ SR(VID_FIR_COEF_V(0, 6));
++ SR(VID_FIR_COEF_V(0, 7));
++
++ SR(VID_PRELOAD(0));
++
++ /* VID2 */
++ SR(VID_BA0(1));
++ SR(VID_BA1(1));
++ SR(VID_POSITION(1));
++ SR(VID_SIZE(1));
++ SR(VID_ATTRIBUTES(1));
++ SR(VID_FIFO_THRESHOLD(1));
++ SR(VID_ROW_INC(1));
++ SR(VID_PIXEL_INC(1));
++ SR(VID_FIR(1));
++ SR(VID_PICTURE_SIZE(1));
++ SR(VID_ACCU0(1));
++ SR(VID_ACCU1(1));
++
++ SR(VID_FIR_COEF_H(1, 0));
++ SR(VID_FIR_COEF_H(1, 1));
++ SR(VID_FIR_COEF_H(1, 2));
++ SR(VID_FIR_COEF_H(1, 3));
++ SR(VID_FIR_COEF_H(1, 4));
++ SR(VID_FIR_COEF_H(1, 5));
++ SR(VID_FIR_COEF_H(1, 6));
++ SR(VID_FIR_COEF_H(1, 7));
++
++ SR(VID_FIR_COEF_HV(1, 0));
++ SR(VID_FIR_COEF_HV(1, 1));
++ SR(VID_FIR_COEF_HV(1, 2));
++ SR(VID_FIR_COEF_HV(1, 3));
++ SR(VID_FIR_COEF_HV(1, 4));
++ SR(VID_FIR_COEF_HV(1, 5));
++ SR(VID_FIR_COEF_HV(1, 6));
++ SR(VID_FIR_COEF_HV(1, 7));
++
++ SR(VID_CONV_COEF(1, 0));
++ SR(VID_CONV_COEF(1, 1));
++ SR(VID_CONV_COEF(1, 2));
++ SR(VID_CONV_COEF(1, 3));
++ SR(VID_CONV_COEF(1, 4));
++
++ SR(VID_FIR_COEF_V(1, 0));
++ SR(VID_FIR_COEF_V(1, 1));
++ SR(VID_FIR_COEF_V(1, 2));
++ SR(VID_FIR_COEF_V(1, 3));
++ SR(VID_FIR_COEF_V(1, 4));
++ SR(VID_FIR_COEF_V(1, 5));
++ SR(VID_FIR_COEF_V(1, 6));
++ SR(VID_FIR_COEF_V(1, 7));
++
++ SR(VID_PRELOAD(1));
++}
++
++void dispc_restore_context(void)
++{
++ RR(SYSCONFIG);
++ RR(IRQENABLE);
++ /*RR(CONTROL);*/
++ RR(CONFIG);
++ RR(DEFAULT_COLOR0);
++ RR(DEFAULT_COLOR1);
++ RR(TRANS_COLOR0);
++ RR(TRANS_COLOR1);
++ RR(LINE_NUMBER);
++ RR(TIMING_H);
++ RR(TIMING_V);
++ RR(POL_FREQ);
++ RR(DIVISOR);
++ RR(GLOBAL_ALPHA);
++ RR(SIZE_DIG);
++ RR(SIZE_LCD);
++
++ RR(GFX_BA0);
++ RR(GFX_BA1);
++ RR(GFX_POSITION);
++ RR(GFX_SIZE);
++ RR(GFX_ATTRIBUTES);
++ RR(GFX_FIFO_THRESHOLD);
++ RR(GFX_ROW_INC);
++ RR(GFX_PIXEL_INC);
++ RR(GFX_WINDOW_SKIP);
++ RR(GFX_TABLE_BA);
++
++ RR(DATA_CYCLE1);
++ RR(DATA_CYCLE2);
++ RR(DATA_CYCLE3);
++
++ RR(CPR_COEF_R);
++ RR(CPR_COEF_G);
++ RR(CPR_COEF_B);
++
++ RR(GFX_PRELOAD);
++
++ /* VID1 */
++ RR(VID_BA0(0));
++ RR(VID_BA1(0));
++ RR(VID_POSITION(0));
++ RR(VID_SIZE(0));
++ RR(VID_ATTRIBUTES(0));
++ RR(VID_FIFO_THRESHOLD(0));
++ RR(VID_ROW_INC(0));
++ RR(VID_PIXEL_INC(0));
++ RR(VID_FIR(0));
++ RR(VID_PICTURE_SIZE(0));
++ RR(VID_ACCU0(0));
++ RR(VID_ACCU1(0));
++
++ RR(VID_FIR_COEF_H(0, 0));
++ RR(VID_FIR_COEF_H(0, 1));
++ RR(VID_FIR_COEF_H(0, 2));
++ RR(VID_FIR_COEF_H(0, 3));
++ RR(VID_FIR_COEF_H(0, 4));
++ RR(VID_FIR_COEF_H(0, 5));
++ RR(VID_FIR_COEF_H(0, 6));
++ RR(VID_FIR_COEF_H(0, 7));
++
++ RR(VID_FIR_COEF_HV(0, 0));
++ RR(VID_FIR_COEF_HV(0, 1));
++ RR(VID_FIR_COEF_HV(0, 2));
++ RR(VID_FIR_COEF_HV(0, 3));
++ RR(VID_FIR_COEF_HV(0, 4));
++ RR(VID_FIR_COEF_HV(0, 5));
++ RR(VID_FIR_COEF_HV(0, 6));
++ RR(VID_FIR_COEF_HV(0, 7));
++
++ RR(VID_CONV_COEF(0, 0));
++ RR(VID_CONV_COEF(0, 1));
++ RR(VID_CONV_COEF(0, 2));
++ RR(VID_CONV_COEF(0, 3));
++ RR(VID_CONV_COEF(0, 4));
++
++ RR(VID_FIR_COEF_V(0, 0));
++ RR(VID_FIR_COEF_V(0, 1));
++ RR(VID_FIR_COEF_V(0, 2));
++ RR(VID_FIR_COEF_V(0, 3));
++ RR(VID_FIR_COEF_V(0, 4));
++ RR(VID_FIR_COEF_V(0, 5));
++ RR(VID_FIR_COEF_V(0, 6));
++ RR(VID_FIR_COEF_V(0, 7));
++
++ RR(VID_PRELOAD(0));
++
++ /* VID2 */
++ RR(VID_BA0(1));
++ RR(VID_BA1(1));
++ RR(VID_POSITION(1));
++ RR(VID_SIZE(1));
++ RR(VID_ATTRIBUTES(1));
++ RR(VID_FIFO_THRESHOLD(1));
++ RR(VID_ROW_INC(1));
++ RR(VID_PIXEL_INC(1));
++ RR(VID_FIR(1));
++ RR(VID_PICTURE_SIZE(1));
++ RR(VID_ACCU0(1));
++ RR(VID_ACCU1(1));
++
++ RR(VID_FIR_COEF_H(1, 0));
++ RR(VID_FIR_COEF_H(1, 1));
++ RR(VID_FIR_COEF_H(1, 2));
++ RR(VID_FIR_COEF_H(1, 3));
++ RR(VID_FIR_COEF_H(1, 4));
++ RR(VID_FIR_COEF_H(1, 5));
++ RR(VID_FIR_COEF_H(1, 6));
++ RR(VID_FIR_COEF_H(1, 7));
++
++ RR(VID_FIR_COEF_HV(1, 0));
++ RR(VID_FIR_COEF_HV(1, 1));
++ RR(VID_FIR_COEF_HV(1, 2));
++ RR(VID_FIR_COEF_HV(1, 3));
++ RR(VID_FIR_COEF_HV(1, 4));
++ RR(VID_FIR_COEF_HV(1, 5));
++ RR(VID_FIR_COEF_HV(1, 6));
++ RR(VID_FIR_COEF_HV(1, 7));
++
++ RR(VID_CONV_COEF(1, 0));
++ RR(VID_CONV_COEF(1, 1));
++ RR(VID_CONV_COEF(1, 2));
++ RR(VID_CONV_COEF(1, 3));
++ RR(VID_CONV_COEF(1, 4));
++
++ RR(VID_FIR_COEF_V(1, 0));
++ RR(VID_FIR_COEF_V(1, 1));
++ RR(VID_FIR_COEF_V(1, 2));
++ RR(VID_FIR_COEF_V(1, 3));
++ RR(VID_FIR_COEF_V(1, 4));
++ RR(VID_FIR_COEF_V(1, 5));
++ RR(VID_FIR_COEF_V(1, 6));
++ RR(VID_FIR_COEF_V(1, 7));
++
++ RR(VID_PRELOAD(1));
++
++ /* enable last, because LCD & DIGIT enable are here */
++ RR(CONTROL);
++}
++
++#undef SR
++#undef RR
++
++static inline void enable_clocks(bool enable)
++{
++ if (enable)
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++ else
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++}
++
++bool dispc_go_busy(enum omap_channel channel)
++{
++ int bit;
++
++ if (channel == OMAP_DSS_CHANNEL_LCD)
++ bit = 5; /* GOLCD */
++ else
++ bit = 6; /* GODIGIT */
++
++ return REG_GET(DISPC_CONTROL, bit, bit) == 1;
++}
++
++void dispc_go(enum omap_channel channel)
++{
++ int bit;
++
++ enable_clocks(1);
++
++ if (channel == OMAP_DSS_CHANNEL_LCD)
++ bit = 0; /* LCDENABLE */
++ else
++ bit = 1; /* DIGITALENABLE */
++
++ /* if the channel is not enabled, we don't need GO */
++ if (REG_GET(DISPC_CONTROL, bit, bit) == 0)
++ goto end;
++
++ if (channel == OMAP_DSS_CHANNEL_LCD)
++ bit = 5; /* GOLCD */
++ else
++ bit = 6; /* GODIGIT */
++
++ if (REG_GET(DISPC_CONTROL, bit, bit) == 1) {
++ DSSERR("GO bit not down for channel %d\n", channel);
++ goto end;
++ }
++
++ DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : "DIGIT");
++
++ REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit);
++end:
++ enable_clocks(0);
++}
++
++static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value)
++{
++ BUG_ON(plane == OMAP_DSS_GFX);
++
++ dispc_write_reg(DISPC_VID_FIR_COEF_H(plane-1, reg), value);
++}
++
++static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value)
++{
++ BUG_ON(plane == OMAP_DSS_GFX);
++
++ dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value);
++}
++
++static void _dispc_write_firv_reg(enum omap_plane plane, int reg, u32 value)
++{
++ BUG_ON(plane == OMAP_DSS_GFX);
++
++ dispc_write_reg(DISPC_VID_FIR_COEF_V(plane-1, reg), value);
++}
++
++static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup,
++ int vscaleup, int five_taps)
++{
++ /* Coefficients for horizontal up-sampling */
++ static const u32 coef_hup[8] = {
++ 0x00800000,
++ 0x0D7CF800,
++ 0x1E70F5FF,
++ 0x335FF5FE,
++ 0xF74949F7,
++ 0xF55F33FB,
++ 0xF5701EFE,
++ 0xF87C0DFF,
++ };
++
++ /* Coefficients for horizontal down-sampling */
++ static const u32 coef_hdown[8] = {
++ 0x24382400,
++ 0x28371FFE,
++ 0x2C361BFB,
++ 0x303516F9,
++ 0x11343311,
++ 0x1635300C,
++ 0x1B362C08,
++ 0x1F372804,
++ };
++
++ /* Coefficients for horizontal and vertical up-sampling */
++ static const u32 coef_hvup[2][8] = {
++ {
++ 0x00800000,
++ 0x037B02FF,
++ 0x0C6F05FE,
++ 0x205907FB,
++ 0x00404000,
++ 0x075920FE,
++ 0x056F0CFF,
++ 0x027B0300,
++ },
++ {
++ 0x00800000,
++ 0x0D7CF8FF,
++ 0x1E70F5FE,
++ 0x335FF5FB,
++ 0xF7404000,
++ 0xF55F33FE,
++ 0xF5701EFF,
++ 0xF87C0D00,
++ },
++ };
++
++ /* Coefficients for horizontal and vertical down-sampling */
++ static const u32 coef_hvdown[2][8] = {
++ {
++ 0x24382400,
++ 0x28391F04,
++ 0x2D381B08,
++ 0x3237170C,
++ 0x123737F7,
++ 0x173732F9,
++ 0x1B382DFB,
++ 0x1F3928FE,
++ },
++ {
++ 0x24382400,
++ 0x28371F04,
++ 0x2C361B08,
++ 0x3035160C,
++ 0x113433F7,
++ 0x163530F9,
++ 0x1B362CFB,
++ 0x1F3728FE,
++ },
++ };
++
++ /* Coefficients for vertical up-sampling */
++ static const u32 coef_vup[8] = {
++ 0x00000000,
++ 0x0000FF00,
++ 0x0000FEFF,
++ 0x0000FBFE,
++ 0x000000F7,
++ 0x0000FEFB,
++ 0x0000FFFE,
++ 0x000000FF,
++ };
++
++
++ /* Coefficients for vertical down-sampling */
++ static const u32 coef_vdown[8] = {
++ 0x00000000,
++ 0x000004FE,
++ 0x000008FB,
++ 0x00000CF9,
++ 0x0000F711,
++ 0x0000F90C,
++ 0x0000FB08,
++ 0x0000FE04,
++ };
++
++ const u32 *h_coef;
++ const u32 *hv_coef;
++ const u32 *hv_coef_mod;
++ const u32 *v_coef;
++ int i;
++
++ if (hscaleup)
++ h_coef = coef_hup;
++ else
++ h_coef = coef_hdown;
++
++ if (vscaleup) {
++ hv_coef = coef_hvup[five_taps];
++ v_coef = coef_vup;
++
++ if (hscaleup)
++ hv_coef_mod = NULL;
++ else
++ hv_coef_mod = coef_hvdown[five_taps];
++ } else {
++ hv_coef = coef_hvdown[five_taps];
++ v_coef = coef_vdown;
++
++ if (hscaleup)
++ hv_coef_mod = coef_hvup[five_taps];
++ else
++ hv_coef_mod = NULL;
++ }
++
++ for (i = 0; i < 8; i++) {
++ u32 h, hv;
++
++ h = h_coef[i];
++
++ hv = hv_coef[i];
++
++ if (hv_coef_mod) {
++ hv &= 0xffffff00;
++ hv |= (hv_coef_mod[i] & 0xff);
++ }
++
++ _dispc_write_firh_reg(plane, i, h);
++ _dispc_write_firhv_reg(plane, i, hv);
++ }
++
++ if (!five_taps)
++ return;
++
++ for (i = 0; i < 8; i++) {
++ u32 v;
++ v = v_coef[i];
++ _dispc_write_firv_reg(plane, i, v);
++ }
++}
++
++static void _dispc_setup_color_conv_coef(void)
++{
++ const struct color_conv_coef {
++ int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
++ int full_range;
++ } ctbl_bt601_5 = {
++ 298, 409, 0, 298, -208, -100, 298, 0, 517, 0,
++ };
++
++ const struct color_conv_coef *ct;
++
++#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
++
++ ct = &ctbl_bt601_5;
++
++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 0), CVAL(ct->rcr, ct->ry));
++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 1), CVAL(ct->gy, ct->rcb));
++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 2), CVAL(ct->gcb, ct->gcr));
++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 3), CVAL(ct->bcr, ct->by));
++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 4), CVAL(0, ct->bcb));
++
++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 0), CVAL(ct->rcr, ct->ry));
++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 1), CVAL(ct->gy, ct->rcb));
++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 2), CVAL(ct->gcb, ct->gcr));
++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 3), CVAL(ct->bcr, ct->by));
++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 4), CVAL(0, ct->bcb));
++
++#undef CVAL
++
++ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(0), ct->full_range, 11, 11);
++ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(1), ct->full_range, 11, 11);
++}
++
++
++static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr)
++{
++ const struct dispc_reg ba0_reg[] = { DISPC_GFX_BA0,
++ DISPC_VID_BA0(0),
++ DISPC_VID_BA0(1) };
++
++ dispc_write_reg(ba0_reg[plane], paddr);
++}
++
++static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr)
++{
++ const struct dispc_reg ba1_reg[] = { DISPC_GFX_BA1,
++ DISPC_VID_BA1(0),
++ DISPC_VID_BA1(1) };
++
++ dispc_write_reg(ba1_reg[plane], paddr);
++}
++
++static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y)
++{
++ const struct dispc_reg pos_reg[] = { DISPC_GFX_POSITION,
++ DISPC_VID_POSITION(0),
++ DISPC_VID_POSITION(1) };
++
++ u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0);
++ dispc_write_reg(pos_reg[plane], val);
++}
++
++static void _dispc_set_pic_size(enum omap_plane plane, int width, int height)
++{
++ const struct dispc_reg siz_reg[] = { DISPC_GFX_SIZE,
++ DISPC_VID_PICTURE_SIZE(0),
++ DISPC_VID_PICTURE_SIZE(1) };
++ u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
++ dispc_write_reg(siz_reg[plane], val);
++}
++
++static void _dispc_set_vid_size(enum omap_plane plane, int width, int height)
++{
++ u32 val;
++ const struct dispc_reg vsi_reg[] = { DISPC_VID_SIZE(0),
++ DISPC_VID_SIZE(1) };
++
++ BUG_ON(plane == OMAP_DSS_GFX);
++
++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
++ dispc_write_reg(vsi_reg[plane-1], val);
++}
++
++static void _dispc_setup_global_alpha(enum omap_plane plane, u8 global_alpha)
++{
++
++ BUG_ON(plane == OMAP_DSS_VIDEO1);
++
++ if (plane == OMAP_DSS_GFX)
++ REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 7, 0);
++ else if (plane == OMAP_DSS_VIDEO2)
++ REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 23, 16);
++}
++
++static void _dispc_set_pix_inc(enum omap_plane plane, s32 inc)
++{
++ const struct dispc_reg ri_reg[] = { DISPC_GFX_PIXEL_INC,
++ DISPC_VID_PIXEL_INC(0),
++ DISPC_VID_PIXEL_INC(1) };
++
++ dispc_write_reg(ri_reg[plane], inc);
++}
++
++static void _dispc_set_row_inc(enum omap_plane plane, s32 inc)
++{
++ const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC,
++ DISPC_VID_ROW_INC(0),
++ DISPC_VID_ROW_INC(1) };
++
++ dispc_write_reg(ri_reg[plane], inc);
++}
++
++static void _dispc_set_color_mode(enum omap_plane plane,
++ enum omap_color_mode color_mode)
++{
++ u32 m = 0;
++
++ switch (color_mode) {
++ case OMAP_DSS_COLOR_CLUT1:
++ m = 0x0; break;
++ case OMAP_DSS_COLOR_CLUT2:
++ m = 0x1; break;
++ case OMAP_DSS_COLOR_CLUT4:
++ m = 0x2; break;
++ case OMAP_DSS_COLOR_CLUT8:
++ m = 0x3; break;
++ case OMAP_DSS_COLOR_RGB12U:
++ m = 0x4; break;
++ case OMAP_DSS_COLOR_ARGB16:
++ m = 0x5; break;
++ case OMAP_DSS_COLOR_RGB16:
++ m = 0x6; break;
++ case OMAP_DSS_COLOR_RGB24U:
++ m = 0x8; break;
++ case OMAP_DSS_COLOR_RGB24P:
++ m = 0x9; break;
++ case OMAP_DSS_COLOR_YUV2:
++ m = 0xa; break;
++ case OMAP_DSS_COLOR_UYVY:
++ m = 0xb; break;
++ case OMAP_DSS_COLOR_ARGB32:
++ m = 0xc; break;
++ case OMAP_DSS_COLOR_RGBA32:
++ m = 0xd; break;
++ case OMAP_DSS_COLOR_RGBX32:
++ m = 0xe; break;
++ default:
++ BUG(); break;
++ }
++
++ REG_FLD_MOD(dispc_reg_att[plane], m, 4, 1);
++}
++
++static void _dispc_set_channel_out(enum omap_plane plane,
++ enum omap_channel channel)
++{
++ int shift;
++ u32 val;
++
++ switch (plane) {
++ case OMAP_DSS_GFX:
++ shift = 8;
++ break;
++ case OMAP_DSS_VIDEO1:
++ case OMAP_DSS_VIDEO2:
++ shift = 16;
++ break;
++ default:
++ BUG();
++ return;
++ }
++
++ val = dispc_read_reg(dispc_reg_att[plane]);
++ val = FLD_MOD(val, channel, shift, shift);
++ dispc_write_reg(dispc_reg_att[plane], val);
++}
++
++void dispc_set_burst_size(enum omap_plane plane,
++ enum omap_burst_size burst_size)
++{
++ int shift;
++ u32 val;
++
++ enable_clocks(1);
++
++ switch (plane) {
++ case OMAP_DSS_GFX:
++ shift = 6;
++ break;
++ case OMAP_DSS_VIDEO1:
++ case OMAP_DSS_VIDEO2:
++ shift = 14;
++ break;
++ default:
++ BUG();
++ return;
++ }
++
++ val = dispc_read_reg(dispc_reg_att[plane]);
++ val = FLD_MOD(val, burst_size, shift+1, shift);
++ dispc_write_reg(dispc_reg_att[plane], val);
++
++ enable_clocks(0);
++}
++
++static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable)
++{
++ u32 val;
++
++ BUG_ON(plane == OMAP_DSS_GFX);
++
++ val = dispc_read_reg(dispc_reg_att[plane]);
++ val = FLD_MOD(val, enable, 9, 9);
++ dispc_write_reg(dispc_reg_att[plane], val);
++}
++
++void dispc_enable_replication(enum omap_plane plane, bool enable)
++{
++ int bit;
++
++ if (plane == OMAP_DSS_GFX)
++ bit = 5;
++ else
++ bit = 10;
++
++ enable_clocks(1);
++ REG_FLD_MOD(dispc_reg_att[plane], enable, bit, bit);
++ enable_clocks(0);
++}
++
++void dispc_set_lcd_size(u16 width, u16 height)
++{
++ u32 val;
++ BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
++ enable_clocks(1);
++ dispc_write_reg(DISPC_SIZE_LCD, val);
++ enable_clocks(0);
++}
++
++void dispc_set_digit_size(u16 width, u16 height)
++{
++ u32 val;
++ BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
++ enable_clocks(1);
++ dispc_write_reg(DISPC_SIZE_DIG, val);
++ enable_clocks(0);
++}
++
++static void dispc_read_plane_fifo_sizes(void)
++{
++ const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS,
++ DISPC_VID_FIFO_SIZE_STATUS(0),
++ DISPC_VID_FIFO_SIZE_STATUS(1) };
++ u32 size;
++ int plane;
++
++ enable_clocks(1);
++
++ for (plane = 0; plane < ARRAY_SIZE(dispc.fifo_size); ++plane) {
++ if (cpu_is_omap24xx())
++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0);
++ else if (cpu_is_omap34xx())
++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0);
++ else
++ BUG();
++
++ dispc.fifo_size[plane] = size;
++ }
++
++ enable_clocks(0);
++}
++
++u32 dispc_get_plane_fifo_size(enum omap_plane plane)
++{
++ return dispc.fifo_size[plane];
++}
++
++void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high)
++{
++ const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD,
++ DISPC_VID_FIFO_THRESHOLD(0),
++ DISPC_VID_FIFO_THRESHOLD(1) };
++ enable_clocks(1);
++
++ DSSDBG("fifo(%d) low/high old %u/%u, new %u/%u\n",
++ plane,
++ REG_GET(ftrs_reg[plane], 11, 0),
++ REG_GET(ftrs_reg[plane], 27, 16),
++ low, high);
++
++ if (cpu_is_omap24xx())
++ dispc_write_reg(ftrs_reg[plane],
++ FLD_VAL(high, 24, 16) | FLD_VAL(low, 8, 0));
++ else
++ dispc_write_reg(ftrs_reg[plane],
++ FLD_VAL(high, 27, 16) | FLD_VAL(low, 11, 0));
++
++ enable_clocks(0);
++}
++
++void dispc_enable_fifomerge(bool enable)
++{
++ enable_clocks(1);
++
++ DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled");
++ REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14);
++
++ enable_clocks(0);
++}
++
++static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc)
++{
++ u32 val;
++ const struct dispc_reg fir_reg[] = { DISPC_VID_FIR(0),
++ DISPC_VID_FIR(1) };
++
++ BUG_ON(plane == OMAP_DSS_GFX);
++
++ if (cpu_is_omap24xx())
++ val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0);
++ else
++ val = FLD_VAL(vinc, 28, 16) | FLD_VAL(hinc, 12, 0);
++ dispc_write_reg(fir_reg[plane-1], val);
++}
++
++static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu)
++{
++ u32 val;
++ const struct dispc_reg ac0_reg[] = { DISPC_VID_ACCU0(0),
++ DISPC_VID_ACCU0(1) };
++
++ BUG_ON(plane == OMAP_DSS_GFX);
++
++ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0);
++ dispc_write_reg(ac0_reg[plane-1], val);
++}
++
++static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu)
++{
++ u32 val;
++ const struct dispc_reg ac1_reg[] = { DISPC_VID_ACCU1(0),
++ DISPC_VID_ACCU1(1) };
++
++ BUG_ON(plane == OMAP_DSS_GFX);
++
++ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0);
++ dispc_write_reg(ac1_reg[plane-1], val);
++}
++
++
++static void _dispc_set_scaling(enum omap_plane plane,
++ u16 orig_width, u16 orig_height,
++ u16 out_width, u16 out_height,
++ bool ilace, bool five_taps,
++ bool fieldmode)
++{
++ int fir_hinc;
++ int fir_vinc;
++ int hscaleup, vscaleup;
++ int accu0 = 0;
++ int accu1 = 0;
++ u32 l;
++
++ BUG_ON(plane == OMAP_DSS_GFX);
++
++ hscaleup = orig_width <= out_width;
++ vscaleup = orig_height <= out_height;
++
++ _dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps);
++
++ if (!orig_width || orig_width == out_width)
++ fir_hinc = 0;
++ else
++ fir_hinc = 1024 * orig_width / out_width;
++
++ if (!orig_height || orig_height == out_height)
++ fir_vinc = 0;
++ else
++ fir_vinc = 1024 * orig_height / out_height;
++
++ _dispc_set_fir(plane, fir_hinc, fir_vinc);
++
++ l = dispc_read_reg(dispc_reg_att[plane]);
++ l &= ~((0x0f << 5) | (0x3 << 21));
++
++ l |= fir_hinc ? (1 << 5) : 0;
++ l |= fir_vinc ? (1 << 6) : 0;
++
++ l |= hscaleup ? 0 : (1 << 7);
++ l |= vscaleup ? 0 : (1 << 8);
++
++ l |= five_taps ? (1 << 21) : 0;
++ l |= five_taps ? (1 << 22) : 0;
++
++ dispc_write_reg(dispc_reg_att[plane], l);
++
++ /*
++ * field 0 = even field = bottom field
++ * field 1 = odd field = top field
++ */
++ if (ilace && !fieldmode) {
++ accu1 = 0;
++ accu0 = (fir_vinc / 2) & 0x3ff;
++ if (accu0 >= 1024/2) {
++ accu1 = 1024/2;
++ accu0 -= accu1;
++ }
++ }
++
++ _dispc_set_vid_accu0(plane, 0, accu0);
++ _dispc_set_vid_accu1(plane, 0, accu1);
++}
++
++static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation,
++ bool mirroring, enum omap_color_mode color_mode)
++{
++ if (color_mode == OMAP_DSS_COLOR_YUV2 ||
++ color_mode == OMAP_DSS_COLOR_UYVY) {
++ int vidrot = 0;
++
++ if (mirroring) {
++ switch (rotation) {
++ case 0:
++ vidrot = 2;
++ break;
++ case 1:
++ vidrot = 1;
++ break;
++ case 2:
++ vidrot = 0;
++ break;
++ case 3:
++ vidrot = 3;
++ break;
++ }
++ } else {
++ switch (rotation) {
++ case 0:
++ vidrot = 0;
++ break;
++ case 1:
++ vidrot = 1;
++ break;
++ case 2:
++ vidrot = 2;
++ break;
++ case 3:
++ vidrot = 3;
++ break;
++ }
++ }
++
++ REG_FLD_MOD(dispc_reg_att[plane], vidrot, 13, 12);
++
++ if (rotation == 1 || rotation == 3)
++ REG_FLD_MOD(dispc_reg_att[plane], 0x1, 18, 18);
++ else
++ REG_FLD_MOD(dispc_reg_att[plane], 0x0, 18, 18);
++ } else {
++ REG_FLD_MOD(dispc_reg_att[plane], 0, 13, 12);
++ REG_FLD_MOD(dispc_reg_att[plane], 0, 18, 18);
++ }
++}
++
++static s32 pixinc(int pixels, u8 ps)
++{
++ if (pixels == 1)
++ return 1;
++ else if (pixels > 1)
++ return 1 + (pixels - 1) * ps;
++ else if (pixels < 0)
++ return 1 - (-pixels + 1) * ps;
++ else
++ BUG();
++}
++
++static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
++ u16 screen_width,
++ u16 width, u16 height,
++ enum omap_color_mode color_mode, bool fieldmode,
++ unsigned int field_offset,
++ unsigned *offset0, unsigned *offset1,
++ s32 *row_inc, s32 *pix_inc)
++{
++ u8 ps;
++
++ switch (color_mode) {
++ case OMAP_DSS_COLOR_RGB16:
++ case OMAP_DSS_COLOR_ARGB16:
++ ps = 2;
++ break;
++
++ case OMAP_DSS_COLOR_RGB24P:
++ ps = 3;
++ break;
++
++ case OMAP_DSS_COLOR_RGB24U:
++ case OMAP_DSS_COLOR_ARGB32:
++ case OMAP_DSS_COLOR_RGBA32:
++ case OMAP_DSS_COLOR_RGBX32:
++ case OMAP_DSS_COLOR_YUV2:
++ case OMAP_DSS_COLOR_UYVY:
++ ps = 4;
++ break;
++
++ default:
++ BUG();
++ return;
++ }
++
++ DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width,
++ width, height);
++
++ /*
++ * field 0 = even field = bottom field
++ * field 1 = odd field = top field
++ */
++ switch (rotation + mirror * 4) {
++ case 0:
++ case 2:
++ /*
++ * If the pixel format is YUV or UYVY divide the width
++ * of the image by 2 for 0 and 180 degree rotation.
++ */
++ if (color_mode == OMAP_DSS_COLOR_YUV2 ||
++ color_mode == OMAP_DSS_COLOR_UYVY)
++ width = width >> 1;
++ case 1:
++ case 3:
++ *offset1 = 0;
++ if (field_offset)
++ *offset0 = field_offset * screen_width * ps;
++ else
++ *offset0 = 0;
++
++ *row_inc = pixinc(1 + (screen_width - width) +
++ (fieldmode ? screen_width : 0),
++ ps);
++ *pix_inc = pixinc(1, ps);
++ break;
++
++ case 4:
++ case 6:
++ /* If the pixel format is YUV or UYVY divide the width
++ * of the image by 2 for 0 degree and 180 degree
++ */
++ if (color_mode == OMAP_DSS_COLOR_YUV2 ||
++ color_mode == OMAP_DSS_COLOR_UYVY)
++ width = width >> 1;
++ case 5:
++ case 7:
++ *offset1 = 0;
++ if (field_offset)
++ *offset0 = field_offset * screen_width * ps;
++ else
++ *offset0 = 0;
++ *row_inc = pixinc(1 - (screen_width + width) -
++ (fieldmode ? screen_width : 0),
++ ps);
++ *pix_inc = pixinc(1, ps);
++ break;
++
++ default:
++ BUG();
++ }
++}
++
++static void calc_dma_rotation_offset(u8 rotation, bool mirror,
++ u16 screen_width,
++ u16 width, u16 height,
++ enum omap_color_mode color_mode, bool fieldmode,
++ unsigned int field_offset,
++ unsigned *offset0, unsigned *offset1,
++ s32 *row_inc, s32 *pix_inc)
++{
++ u8 ps;
++ u16 fbw, fbh;
++
++ switch (color_mode) {
++ case OMAP_DSS_COLOR_RGB16:
++ case OMAP_DSS_COLOR_ARGB16:
++ ps = 2;
++ break;
++
++ case OMAP_DSS_COLOR_RGB24P:
++ ps = 3;
++ break;
++
++ case OMAP_DSS_COLOR_RGB24U:
++ case OMAP_DSS_COLOR_ARGB32:
++ case OMAP_DSS_COLOR_RGBA32:
++ case OMAP_DSS_COLOR_RGBX32:
++ ps = 4;
++ break;
++
++ case OMAP_DSS_COLOR_YUV2:
++ case OMAP_DSS_COLOR_UYVY:
++ ps = 2;
++ break;
++ default:
++ BUG();
++ return;
++ }
++
++ DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width,
++ width, height);
++
++ /* width & height are overlay sizes, convert to fb sizes */
++
++ if (rotation == 0 || rotation == 2) {
++ fbw = width;
++ fbh = height;
++ } else {
++ fbw = height;
++ fbh = width;
++ }
++
++ /*
++ * field 0 = even field = bottom field
++ * field 1 = odd field = top field
++ */
++ switch (rotation + mirror * 4) {
++ case 0:
++ *offset1 = 0;
++ if (field_offset)
++ *offset0 = *offset1 + field_offset * screen_width * ps;
++ else
++ *offset0 = *offset1;
++ *row_inc = pixinc(1 + (screen_width - fbw) +
++ (fieldmode ? screen_width : 0),
++ ps);
++ *pix_inc = pixinc(1, ps);
++ break;
++ case 1:
++ *offset1 = screen_width * (fbh - 1) * ps;
++ if (field_offset)
++ *offset0 = *offset1 + field_offset * ps;
++ else
++ *offset0 = *offset1;
++ *row_inc = pixinc(screen_width * (fbh - 1) + 1 +
++ (fieldmode ? 1 : 0), ps);
++ *pix_inc = pixinc(-screen_width, ps);
++ break;
++ case 2:
++ *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps;
++ if (field_offset)
++ *offset0 = *offset1 - field_offset * screen_width * ps;
++ else
++ *offset0 = *offset1;
++ *row_inc = pixinc(-1 -
++ (screen_width - fbw) -
++ (fieldmode ? screen_width : 0),
++ ps);
++ *pix_inc = pixinc(-1, ps);
++ break;
++ case 3:
++ *offset1 = (fbw - 1) * ps;
++ if (field_offset)
++ *offset0 = *offset1 - field_offset * ps;
++ else
++ *offset0 = *offset1;
++ *row_inc = pixinc(-screen_width * (fbh - 1) - 1 -
++ (fieldmode ? 1 : 0), ps);
++ *pix_inc = pixinc(screen_width, ps);
++ break;
++
++ /* mirroring */
++ case 0 + 4:
++ *offset1 = (fbw - 1) * ps;
++ if (field_offset)
++ *offset0 = *offset1 + field_offset * screen_width * ps;
++ else
++ *offset0 = *offset1;
++ *row_inc = pixinc(screen_width * 2 - 1 +
++ (fieldmode ? screen_width : 0),
++ ps);
++ *pix_inc = pixinc(-1, ps);
++ break;
++
++ case 1 + 4:
++ *offset1 = 0;
++ if (field_offset)
++ *offset0 = *offset1 + field_offset * ps;
++ else
++ *offset0 = *offset1;
++ *row_inc = pixinc(-screen_width * (fbh - 1) + 1 +
++ (fieldmode ? 1 : 0),
++ ps);
++ *pix_inc = pixinc(screen_width, ps);
++ break;
++
++ case 2 + 4:
++ *offset1 = screen_width * (fbh - 1) * ps;
++ if (field_offset)
++ *offset0 = *offset1 - field_offset * screen_width * ps;
++ else
++ *offset0 = *offset1;
++ *row_inc = pixinc(1 - screen_width * 2 -
++ (fieldmode ? screen_width : 0),
++ ps);
++ *pix_inc = pixinc(1, ps);
++ break;
++
++ case 3 + 4:
++ *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps;
++ if (field_offset)
++ *offset0 = *offset1 - field_offset * ps;
++ else
++ *offset0 = *offset1;
++ *row_inc = pixinc(screen_width * (fbh - 1) - 1 -
++ (fieldmode ? 1 : 0),
++ ps);
++ *pix_inc = pixinc(-screen_width, ps);
++ break;
++
++ default:
++ BUG();
++ }
++}
++
++static unsigned long calc_fclk_five_taps(u16 width, u16 height,
++ u16 out_width, u16 out_height, enum omap_color_mode color_mode)
++{
++ u32 fclk = 0;
++ /* FIXME venc pclk? */
++ u64 tmp, pclk = dispc_pclk_rate();
++
++ if (height > out_height) {
++ /* FIXME get real display PPL */
++ unsigned int ppl = 800;
++
++ tmp = pclk * height * out_width;
++ do_div(tmp, 2 * out_height * ppl);
++ fclk = tmp;
++
++ if (height > 2 * out_height && ppl != out_width) {
++ tmp = pclk * (height - 2 * out_height) * out_width;
++ do_div(tmp, 2 * out_height * (ppl - out_width));
++ fclk = max(fclk, (u32) tmp);
++ }
++ }
++
++ if (width > out_width) {
++ tmp = pclk * width;
++ do_div(tmp, out_width);
++ fclk = max(fclk, (u32) tmp);
++
++ if (color_mode == OMAP_DSS_COLOR_RGB24U)
++ fclk <<= 1;
++ }
++
++ return fclk;
++}
++
++static unsigned long calc_fclk(u16 width, u16 height,
++ u16 out_width, u16 out_height)
++{
++ unsigned int hf, vf;
++
++ /*
++ * FIXME how to determine the 'A' factor
++ * for the no downscaling case ?
++ */
++
++ if (width > 3 * out_width)
++ hf = 4;
++ else if (width > 2 * out_width)
++ hf = 3;
++ else if (width > out_width)
++ hf = 2;
++ else
++ hf = 1;
++
++ if (height > out_height)
++ vf = 2;
++ else
++ vf = 1;
++
++ /* FIXME venc pclk? */
++ return dispc_pclk_rate() * vf * hf;
++}
++
++void dispc_set_channel_out(enum omap_plane plane, enum omap_channel channel_out)
++{
++ enable_clocks(1);
++ _dispc_set_channel_out(plane, channel_out);
++ enable_clocks(0);
++}
++
++static int _dispc_setup_plane(enum omap_plane plane,
++ u32 paddr, u16 screen_width,
++ u16 pos_x, u16 pos_y,
++ u16 width, u16 height,
++ u16 out_width, u16 out_height,
++ enum omap_color_mode color_mode,
++ bool ilace,
++ enum omap_dss_rotation_type rotation_type,
++ u8 rotation, int mirror,
++ u8 global_alpha)
++{
++ const int maxdownscale = cpu_is_omap34xx() ? 4 : 2;
++ bool five_taps = 0;
++ bool fieldmode = 0;
++ int cconv = 0;
++ unsigned offset0, offset1;
++ s32 row_inc;
++ s32 pix_inc;
++ u16 frame_height = height;
++ unsigned int field_offset = 0;
++
++ if (paddr == 0)
++ return -EINVAL;
++
++ if (ilace && height == out_height)
++ fieldmode = 1;
++
++ if (ilace) {
++ if (fieldmode)
++ height /= 2;
++ pos_y /= 2;
++ out_height /= 2;
++
++ DSSDBG("adjusting for ilace: height %d, pos_y %d, "
++ "out_height %d\n",
++ height, pos_y, out_height);
++ }
++
++ if (plane == OMAP_DSS_GFX) {
++ if (width != out_width || height != out_height)
++ return -EINVAL;
++
++ switch (color_mode) {
++ case OMAP_DSS_COLOR_ARGB16:
++ case OMAP_DSS_COLOR_RGB16:
++ case OMAP_DSS_COLOR_RGB24P:
++ case OMAP_DSS_COLOR_RGB24U:
++ case OMAP_DSS_COLOR_ARGB32:
++ case OMAP_DSS_COLOR_RGBA32:
++ case OMAP_DSS_COLOR_RGBX32:
++ break;
++
++ default:
++ return -EINVAL;
++ }
++ } else {
++ /* video plane */
++
++ unsigned long fclk = 0;
++
++ if (out_width < width / maxdownscale ||
++ out_width > width * 8)
++ return -EINVAL;
++
++ if (out_height < height / maxdownscale ||
++ out_height > height * 8)
++ return -EINVAL;
++
++ switch (color_mode) {
++ case OMAP_DSS_COLOR_RGB16:
++ case OMAP_DSS_COLOR_RGB24P:
++ case OMAP_DSS_COLOR_RGB24U:
++ case OMAP_DSS_COLOR_RGBX32:
++ break;
++
++ case OMAP_DSS_COLOR_ARGB16:
++ case OMAP_DSS_COLOR_ARGB32:
++ case OMAP_DSS_COLOR_RGBA32:
++ if (plane == OMAP_DSS_VIDEO1)
++ return -EINVAL;
++ break;
++
++ case OMAP_DSS_COLOR_YUV2:
++ case OMAP_DSS_COLOR_UYVY:
++ cconv = 1;
++ break;
++
++ default:
++ return -EINVAL;
++ }
++
++ /* Must use 5-tap filter? */
++ five_taps = height > out_height * 2;
++
++ if (!five_taps) {
++ fclk = calc_fclk(width, height,
++ out_width, out_height);
++
++ /* Try 5-tap filter if 3-tap fclk is too high */
++ if (cpu_is_omap34xx() && height > out_height &&
++ fclk > dispc_fclk_rate())
++ five_taps = true;
++ }
++
++ if (width > (2048 >> five_taps))
++ return -EINVAL;
++
++ if (five_taps)
++ fclk = calc_fclk_five_taps(width, height,
++ out_width, out_height, color_mode);
++
++ DSSDBG("required fclk rate = %lu Hz\n", fclk);
++ DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
++
++ if (fclk > dispc_fclk_rate()) {
++ DSSERR("failed to set up scaling, "
++ "required fclk rate = %lu Hz, "
++ "current fclk rate = %lu Hz\n",
++ fclk, dispc_fclk_rate());
++ return -EINVAL;
++ }
++ }
++
++ if (ilace && !fieldmode) {
++ /*
++ * when downscaling the bottom field may have to start several
++ * source lines below the top field. Unfortunately ACCUI
++ * registers will only hold the fractional part of the offset
++ * so the integer part must be added to the base address of the
++ * bottom field.
++ */
++ if (!height || height == out_height)
++ field_offset = 0;
++ else
++ field_offset = height / out_height / 2;
++ }
++
++ /* Fields are independent but interleaved in memory. */
++ if (fieldmode)
++ field_offset = 1;
++
++ if (rotation_type == OMAP_DSS_ROT_DMA)
++ calc_dma_rotation_offset(rotation, mirror,
++ screen_width, width, frame_height, color_mode,
++ fieldmode, field_offset,
++ &offset0, &offset1, &row_inc, &pix_inc);
++ else
++ calc_vrfb_rotation_offset(rotation, mirror,
++ screen_width, width, frame_height, color_mode,
++ fieldmode, field_offset,
++ &offset0, &offset1, &row_inc, &pix_inc);
++
++ DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n",
++ offset0, offset1, row_inc, pix_inc);
++
++ _dispc_set_color_mode(plane, color_mode);
++
++ _dispc_set_plane_ba0(plane, paddr + offset0);
++ _dispc_set_plane_ba1(plane, paddr + offset1);
++
++ _dispc_set_row_inc(plane, row_inc);
++ _dispc_set_pix_inc(plane, pix_inc);
++
++ DSSDBG("%d,%d %dx%d -> %dx%d\n", pos_x, pos_y, width, height,
++ out_width, out_height);
++
++ _dispc_set_plane_pos(plane, pos_x, pos_y);
++
++ _dispc_set_pic_size(plane, width, height);
++
++ if (plane != OMAP_DSS_GFX) {
++ _dispc_set_scaling(plane, width, height,
++ out_width, out_height,
++ ilace, five_taps, fieldmode);
++ _dispc_set_vid_size(plane, out_width, out_height);
++ _dispc_set_vid_color_conv(plane, cconv);
++ }
++
++ _dispc_set_rotation_attrs(plane, rotation, mirror, color_mode);
++
++ if (plane != OMAP_DSS_VIDEO1)
++ _dispc_setup_global_alpha(plane, global_alpha);
++
++ return 0;
++}
++
++static void _dispc_enable_plane(enum omap_plane plane, bool enable)
++{
++ REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0);
++}
++
++static void dispc_disable_isr(void *data, u32 mask)
++{
++ struct completion *compl = data;
++ complete(compl);
++}
++
++static void _enable_lcd_out(bool enable)
++{
++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0);
++}
++
++void dispc_enable_lcd_out(bool enable)
++{
++ struct completion frame_done_completion;
++ bool is_on;
++ int r;
++
++ enable_clocks(1);
++
++ /* When we disable LCD output, we need to wait until frame is done.
++ * Otherwise the DSS is still working, and turning off the clocks
++ * prevents DSS from going to OFF mode */
++ is_on = REG_GET(DISPC_CONTROL, 0, 0);
++
++ if (!enable && is_on) {
++ init_completion(&frame_done_completion);
++
++ r = omap_dispc_register_isr(dispc_disable_isr,
++ &frame_done_completion,
++ DISPC_IRQ_FRAMEDONE);
++
++ if (r)
++ DSSERR("failed to register FRAMEDONE isr\n");
++ }
++
++ _enable_lcd_out(enable);
++
++ if (!enable && is_on) {
++ if (!wait_for_completion_timeout(&frame_done_completion,
++ msecs_to_jiffies(100)))
++ DSSERR("timeout waiting for FRAME DONE\n");
++
++ r = omap_dispc_unregister_isr(dispc_disable_isr,
++ &frame_done_completion,
++ DISPC_IRQ_FRAMEDONE);
++
++ if (r)
++ DSSERR("failed to unregister FRAMEDONE isr\n");
++ }
++
++ enable_clocks(0);
++}
++
++static void _enable_digit_out(bool enable)
++{
++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1);
++}
++
++void dispc_enable_digit_out(bool enable)
++{
++ struct completion frame_done_completion;
++ int r;
++
++ enable_clocks(1);
++
++ if (REG_GET(DISPC_CONTROL, 1, 1) == enable) {
++ enable_clocks(0);
++ return;
++ }
++
++ if (enable) {
++ unsigned long flags;
++ /* When we enable digit output, we'll get an extra digit
++ * sync lost interrupt, that we need to ignore */
++ spin_lock_irqsave(&dispc.irq_lock, flags);
++ dispc.irq_error_mask &= ~DISPC_IRQ_SYNC_LOST_DIGIT;
++ _omap_dispc_set_irqs();
++ spin_unlock_irqrestore(&dispc.irq_lock, flags);
++ }
++
++ /* When we disable digit output, we need to wait until fields are done.
++ * Otherwise the DSS is still working, and turning off the clocks
++ * prevents DSS from going to OFF mode. And when enabling, we need to
++ * wait for the extra sync losts */
++ init_completion(&frame_done_completion);
++
++ r = omap_dispc_register_isr(dispc_disable_isr, &frame_done_completion,
++ DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD);
++ if (r)
++ DSSERR("failed to register EVSYNC isr\n");
++
++ _enable_digit_out(enable);
++
++ /* XXX I understand from TRM that we should only wait for the
++ * current field to complete. But it seems we have to wait
++ * for both fields */
++ if (!wait_for_completion_timeout(&frame_done_completion,
++ msecs_to_jiffies(100)))
++ DSSERR("timeout waiting for EVSYNC\n");
++
++ if (!wait_for_completion_timeout(&frame_done_completion,
++ msecs_to_jiffies(100)))
++ DSSERR("timeout waiting for EVSYNC\n");
++
++ r = omap_dispc_unregister_isr(dispc_disable_isr,
++ &frame_done_completion,
++ DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD);
++ if (r)
++ DSSERR("failed to unregister EVSYNC isr\n");
++
++ if (enable) {
++ unsigned long flags;
++ spin_lock_irqsave(&dispc.irq_lock, flags);
++ dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR;
++ dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT);
++ _omap_dispc_set_irqs();
++ spin_unlock_irqrestore(&dispc.irq_lock, flags);
++ }
++
++ enable_clocks(0);
++}
++
++void dispc_lcd_enable_signal_polarity(bool act_high)
++{
++ enable_clocks(1);
++ REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29);
++ enable_clocks(0);
++}
++
++void dispc_lcd_enable_signal(bool enable)
++{
++ enable_clocks(1);
++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28);
++ enable_clocks(0);
++}
++
++void dispc_pck_free_enable(bool enable)
++{
++ enable_clocks(1);
++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27);
++ enable_clocks(0);
++}
++
++void dispc_enable_fifohandcheck(bool enable)
++{
++ enable_clocks(1);
++ REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16);
++ enable_clocks(0);
++}
++
++
++void dispc_set_lcd_display_type(enum omap_lcd_display_type type)
++{
++ int mode;
++
++ switch (type) {
++ case OMAP_DSS_LCD_DISPLAY_STN:
++ mode = 0;
++ break;
++
++ case OMAP_DSS_LCD_DISPLAY_TFT:
++ mode = 1;
++ break;
++
++ default:
++ BUG();
++ return;
++ }
++
++ enable_clocks(1);
++ REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3);
++ enable_clocks(0);
++}
++
++void dispc_set_loadmode(enum omap_dss_load_mode mode)
++{
++ enable_clocks(1);
++ REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1);
++ enable_clocks(0);
++}
++
++
++void dispc_set_default_color(enum omap_channel channel, u32 color)
++{
++ const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0,
++ DISPC_DEFAULT_COLOR1 };
++
++ enable_clocks(1);
++ dispc_write_reg(def_reg[channel], color);
++ enable_clocks(0);
++}
++
++u32 dispc_get_default_color(enum omap_channel channel)
++{
++ const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0,
++ DISPC_DEFAULT_COLOR1 };
++ u32 l;
++
++ BUG_ON(channel != OMAP_DSS_CHANNEL_DIGIT &&
++ channel != OMAP_DSS_CHANNEL_LCD);
++
++ enable_clocks(1);
++ l = dispc_read_reg(def_reg[channel]);
++ enable_clocks(0);
++
++ return l;
++}
++
++void dispc_set_trans_key(enum omap_channel ch,
++ enum omap_dss_trans_key_type type,
++ u32 trans_key)
++{
++ const struct dispc_reg tr_reg[] = {
++ DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 };
++
++ enable_clocks(1);
++ if (ch == OMAP_DSS_CHANNEL_LCD)
++ REG_FLD_MOD(DISPC_CONFIG, type, 11, 11);
++ else /* OMAP_DSS_CHANNEL_DIGIT */
++ REG_FLD_MOD(DISPC_CONFIG, type, 13, 13);
++
++ dispc_write_reg(tr_reg[ch], trans_key);
++ enable_clocks(0);
++}
++
++void dispc_get_trans_key(enum omap_channel ch,
++ enum omap_dss_trans_key_type *type,
++ u32 *trans_key)
++{
++ const struct dispc_reg tr_reg[] = {
++ DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 };
++
++ enable_clocks(1);
++ if (type) {
++ if (ch == OMAP_DSS_CHANNEL_LCD)
++ *type = REG_GET(DISPC_CONFIG, 11, 11);
++ else if (ch == OMAP_DSS_CHANNEL_DIGIT)
++ *type = REG_GET(DISPC_CONFIG, 13, 13);
++ else
++ BUG();
++ }
++
++ if (trans_key)
++ *trans_key = dispc_read_reg(tr_reg[ch]);
++ enable_clocks(0);
++}
++
++void dispc_enable_trans_key(enum omap_channel ch, bool enable)
++{
++ enable_clocks(1);
++ if (ch == OMAP_DSS_CHANNEL_LCD)
++ REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10);
++ else /* OMAP_DSS_CHANNEL_DIGIT */
++ REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12);
++ enable_clocks(0);
++}
++void dispc_enable_alpha_blending(enum omap_channel ch, bool enable)
++{
++ enable_clocks(1);
++ if (ch == OMAP_DSS_CHANNEL_LCD)
++ REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18);
++ else /* OMAP_DSS_CHANNEL_DIGIT */
++ REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19);
++ enable_clocks(0);
++}
++bool dispc_alpha_blending_enabled(enum omap_channel ch)
++{
++ bool enabled;
++
++ enable_clocks(1);
++ if (ch == OMAP_DSS_CHANNEL_LCD)
++ enabled = REG_GET(DISPC_CONFIG, 18, 18);
++ else if (ch == OMAP_DSS_CHANNEL_DIGIT)
++ enabled = REG_GET(DISPC_CONFIG, 18, 18);
++ else
++ BUG();
++ enable_clocks(0);
++
++ return enabled;
++
++}
++
++
++bool dispc_trans_key_enabled(enum omap_channel ch)
++{
++ bool enabled;
++
++ enable_clocks(1);
++ if (ch == OMAP_DSS_CHANNEL_LCD)
++ enabled = REG_GET(DISPC_CONFIG, 10, 10);
++ else if (ch == OMAP_DSS_CHANNEL_DIGIT)
++ enabled = REG_GET(DISPC_CONFIG, 12, 12);
++ else
++ BUG();
++ enable_clocks(0);
++
++ return enabled;
++}
++
++
++void dispc_set_tft_data_lines(u8 data_lines)
++{
++ int code;
++
++ switch (data_lines) {
++ case 12:
++ code = 0;
++ break;
++ case 16:
++ code = 1;
++ break;
++ case 18:
++ code = 2;
++ break;
++ case 24:
++ code = 3;
++ break;
++ default:
++ BUG();
++ return;
++ }
++
++ enable_clocks(1);
++ REG_FLD_MOD(DISPC_CONTROL, code, 9, 8);
++ enable_clocks(0);
++}
++
++void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode)
++{
++ u32 l;
++ int stallmode;
++ int gpout0 = 1;
++ int gpout1;
++
++ switch (mode) {
++ case OMAP_DSS_PARALLELMODE_BYPASS:
++ stallmode = 0;
++ gpout1 = 1;
++ break;
++
++ case OMAP_DSS_PARALLELMODE_RFBI:
++ stallmode = 1;
++ gpout1 = 0;
++ break;
++
++ case OMAP_DSS_PARALLELMODE_DSI:
++ stallmode = 1;
++ gpout1 = 1;
++ break;
++
++ default:
++ BUG();
++ return;
++ }
++
++ enable_clocks(1);
++
++ l = dispc_read_reg(DISPC_CONTROL);
++
++ l = FLD_MOD(l, stallmode, 11, 11);
++ l = FLD_MOD(l, gpout0, 15, 15);
++ l = FLD_MOD(l, gpout1, 16, 16);
++
++ dispc_write_reg(DISPC_CONTROL, l);
++
++ enable_clocks(0);
++}
++
++static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
++ int vsw, int vfp, int vbp)
++{
++ if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
++ if (hsw < 1 || hsw > 64 ||
++ hfp < 1 || hfp > 256 ||
++ hbp < 1 || hbp > 256 ||
++ vsw < 1 || vsw > 64 ||
++ vfp < 0 || vfp > 255 ||
++ vbp < 0 || vbp > 255)
++ return false;
++ } else {
++ if (hsw < 1 || hsw > 256 ||
++ hfp < 1 || hfp > 4096 ||
++ hbp < 1 || hbp > 4096 ||
++ vsw < 1 || vsw > 256 ||
++ vfp < 0 || vfp > 4095 ||
++ vbp < 0 || vbp > 4095)
++ return false;
++ }
++
++ return true;
++}
++
++bool dispc_lcd_timings_ok(struct omap_video_timings *timings)
++{
++ return _dispc_lcd_timings_ok(timings->hsw, timings->hfp,
++ timings->hbp, timings->vsw,
++ timings->vfp, timings->vbp);
++}
++
++static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp,
++ int vsw, int vfp, int vbp)
++{
++ u32 timing_h, timing_v;
++
++ if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
++ timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) |
++ FLD_VAL(hbp-1, 27, 20);
++
++ timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) |
++ FLD_VAL(vbp, 27, 20);
++ } else {
++ timing_h = FLD_VAL(hsw-1, 7, 0) | FLD_VAL(hfp-1, 19, 8) |
++ FLD_VAL(hbp-1, 31, 20);
++
++ timing_v = FLD_VAL(vsw-1, 7, 0) | FLD_VAL(vfp, 19, 8) |
++ FLD_VAL(vbp, 31, 20);
++ }
++
++ enable_clocks(1);
++ dispc_write_reg(DISPC_TIMING_H, timing_h);
++ dispc_write_reg(DISPC_TIMING_V, timing_v);
++ enable_clocks(0);
++}
++
++/* change name to mode? */
++void dispc_set_lcd_timings(struct omap_video_timings *timings)
++{
++ unsigned xtot, ytot;
++ unsigned long ht, vt;
++
++ if (!_dispc_lcd_timings_ok(timings->hsw, timings->hfp,
++ timings->hbp, timings->vsw,
++ timings->vfp, timings->vbp))
++ BUG();
++
++ _dispc_set_lcd_timings(timings->hsw, timings->hfp, timings->hbp,
++ timings->vsw, timings->vfp, timings->vbp);
++
++ dispc_set_lcd_size(timings->x_res, timings->y_res);
++
++ xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp;
++ ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp;
++
++ ht = (timings->pixel_clock * 1000) / xtot;
++ vt = (timings->pixel_clock * 1000) / xtot / ytot;
++
++ DSSDBG("xres %u yres %u\n", timings->x_res, timings->y_res);
++ DSSDBG("pck %u\n", timings->pixel_clock);
++ DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n",
++ timings->hsw, timings->hfp, timings->hbp,
++ timings->vsw, timings->vfp, timings->vbp);
++
++ DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
++}
++
++void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div)
++{
++ BUG_ON(lck_div < 1);
++ BUG_ON(pck_div < 2);
++
++ enable_clocks(1);
++ dispc_write_reg(DISPC_DIVISOR,
++ FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0));
++ enable_clocks(0);
++}
++
++static void dispc_get_lcd_divisor(int *lck_div, int *pck_div)
++{
++ u32 l;
++ l = dispc_read_reg(DISPC_DIVISOR);
++ *lck_div = FLD_GET(l, 23, 16);
++ *pck_div = FLD_GET(l, 7, 0);
++}
++
++unsigned long dispc_fclk_rate(void)
++{
++ unsigned long r = 0;
++
++ if (dss_get_dispc_clk_source() == 0)
++ r = dss_clk_get_rate(DSS_CLK_FCK1);
++ else
++#ifdef CONFIG_OMAP2_DSS_DSI
++ r = dsi_get_dsi1_pll_rate();
++#else
++ BUG();
++#endif
++ return r;
++}
++
++unsigned long dispc_lclk_rate(void)
++{
++ int lcd;
++ unsigned long r;
++ u32 l;
++
++ l = dispc_read_reg(DISPC_DIVISOR);
++
++ lcd = FLD_GET(l, 23, 16);
++
++ r = dispc_fclk_rate();
++
++ return r / lcd;
++}
++
++unsigned long dispc_pclk_rate(void)
++{
++ int lcd, pcd;
++ unsigned long r;
++ u32 l;
++
++ l = dispc_read_reg(DISPC_DIVISOR);
++
++ lcd = FLD_GET(l, 23, 16);
++ pcd = FLD_GET(l, 7, 0);
++
++ r = dispc_fclk_rate();
++
++ return r / lcd / pcd;
++}
++
++void dispc_dump_clocks(struct seq_file *s)
++{
++ int lcd, pcd;
++
++ enable_clocks(1);
++
++ dispc_get_lcd_divisor(&lcd, &pcd);
++
++ seq_printf(s, "- dispc -\n");
++
++ seq_printf(s, "dispc fclk source = %s\n",
++ dss_get_dispc_clk_source() == 0 ?
++ "dss1_alwon_fclk" : "dsi1_pll_fclk");
++
++ seq_printf(s, "pixel clk = %lu / %d / %d = %lu\n",
++ dispc_fclk_rate(),
++ lcd, pcd,
++ dispc_pclk_rate());
++
++ enable_clocks(0);
++}
++
++void dispc_dump_regs(struct seq_file *s)
++{
++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r))
++
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ DUMPREG(DISPC_REVISION);
++ DUMPREG(DISPC_SYSCONFIG);
++ DUMPREG(DISPC_SYSSTATUS);
++ DUMPREG(DISPC_IRQSTATUS);
++ DUMPREG(DISPC_IRQENABLE);
++ DUMPREG(DISPC_CONTROL);
++ DUMPREG(DISPC_CONFIG);
++ DUMPREG(DISPC_CAPABLE);
++ DUMPREG(DISPC_DEFAULT_COLOR0);
++ DUMPREG(DISPC_DEFAULT_COLOR1);
++ DUMPREG(DISPC_TRANS_COLOR0);
++ DUMPREG(DISPC_TRANS_COLOR1);
++ DUMPREG(DISPC_LINE_STATUS);
++ DUMPREG(DISPC_LINE_NUMBER);
++ DUMPREG(DISPC_TIMING_H);
++ DUMPREG(DISPC_TIMING_V);
++ DUMPREG(DISPC_POL_FREQ);
++ DUMPREG(DISPC_DIVISOR);
++ DUMPREG(DISPC_GLOBAL_ALPHA);
++ DUMPREG(DISPC_SIZE_DIG);
++ DUMPREG(DISPC_SIZE_LCD);
++
++ DUMPREG(DISPC_GFX_BA0);
++ DUMPREG(DISPC_GFX_BA1);
++ DUMPREG(DISPC_GFX_POSITION);
++ DUMPREG(DISPC_GFX_SIZE);
++ DUMPREG(DISPC_GFX_ATTRIBUTES);
++ DUMPREG(DISPC_GFX_FIFO_THRESHOLD);
++ DUMPREG(DISPC_GFX_FIFO_SIZE_STATUS);
++ DUMPREG(DISPC_GFX_ROW_INC);
++ DUMPREG(DISPC_GFX_PIXEL_INC);
++ DUMPREG(DISPC_GFX_WINDOW_SKIP);
++ DUMPREG(DISPC_GFX_TABLE_BA);
++
++ DUMPREG(DISPC_DATA_CYCLE1);
++ DUMPREG(DISPC_DATA_CYCLE2);
++ DUMPREG(DISPC_DATA_CYCLE3);
++
++ DUMPREG(DISPC_CPR_COEF_R);
++ DUMPREG(DISPC_CPR_COEF_G);
++ DUMPREG(DISPC_CPR_COEF_B);
++
++ DUMPREG(DISPC_GFX_PRELOAD);
++
++ DUMPREG(DISPC_VID_BA0(0));
++ DUMPREG(DISPC_VID_BA1(0));
++ DUMPREG(DISPC_VID_POSITION(0));
++ DUMPREG(DISPC_VID_SIZE(0));
++ DUMPREG(DISPC_VID_ATTRIBUTES(0));
++ DUMPREG(DISPC_VID_FIFO_THRESHOLD(0));
++ DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(0));
++ DUMPREG(DISPC_VID_ROW_INC(0));
++ DUMPREG(DISPC_VID_PIXEL_INC(0));
++ DUMPREG(DISPC_VID_FIR(0));
++ DUMPREG(DISPC_VID_PICTURE_SIZE(0));
++ DUMPREG(DISPC_VID_ACCU0(0));
++ DUMPREG(DISPC_VID_ACCU1(0));
++
++ DUMPREG(DISPC_VID_BA0(1));
++ DUMPREG(DISPC_VID_BA1(1));
++ DUMPREG(DISPC_VID_POSITION(1));
++ DUMPREG(DISPC_VID_SIZE(1));
++ DUMPREG(DISPC_VID_ATTRIBUTES(1));
++ DUMPREG(DISPC_VID_FIFO_THRESHOLD(1));
++ DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(1));
++ DUMPREG(DISPC_VID_ROW_INC(1));
++ DUMPREG(DISPC_VID_PIXEL_INC(1));
++ DUMPREG(DISPC_VID_FIR(1));
++ DUMPREG(DISPC_VID_PICTURE_SIZE(1));
++ DUMPREG(DISPC_VID_ACCU0(1));
++ DUMPREG(DISPC_VID_ACCU1(1));
++
++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 0));
++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 1));
++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 2));
++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 3));
++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 4));
++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 5));
++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 6));
++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 7));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 0));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 1));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 2));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 3));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 4));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 5));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 6));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 7));
++ DUMPREG(DISPC_VID_CONV_COEF(0, 0));
++ DUMPREG(DISPC_VID_CONV_COEF(0, 1));
++ DUMPREG(DISPC_VID_CONV_COEF(0, 2));
++ DUMPREG(DISPC_VID_CONV_COEF(0, 3));
++ DUMPREG(DISPC_VID_CONV_COEF(0, 4));
++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 0));
++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 1));
++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 2));
++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 3));
++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 4));
++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 5));
++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 6));
++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 7));
++
++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 0));
++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 1));
++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 2));
++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 3));
++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 4));
++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 5));
++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 6));
++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 7));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 0));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 1));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 2));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 3));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 4));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 5));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 6));
++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 7));
++ DUMPREG(DISPC_VID_CONV_COEF(1, 0));
++ DUMPREG(DISPC_VID_CONV_COEF(1, 1));
++ DUMPREG(DISPC_VID_CONV_COEF(1, 2));
++ DUMPREG(DISPC_VID_CONV_COEF(1, 3));
++ DUMPREG(DISPC_VID_CONV_COEF(1, 4));
++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 0));
++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 1));
++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 2));
++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 3));
++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 4));
++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 5));
++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 6));
++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 7));
++
++ DUMPREG(DISPC_VID_PRELOAD(0));
++ DUMPREG(DISPC_VID_PRELOAD(1));
++
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++#undef DUMPREG
++}
++
++static void _dispc_set_pol_freq(bool onoff, bool rf, bool ieo, bool ipc,
++ bool ihs, bool ivs, u8 acbi, u8 acb)
++{
++ u32 l = 0;
++
++ DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d acbi %d acb %d\n",
++ onoff, rf, ieo, ipc, ihs, ivs, acbi, acb);
++
++ l |= FLD_VAL(onoff, 17, 17);
++ l |= FLD_VAL(rf, 16, 16);
++ l |= FLD_VAL(ieo, 15, 15);
++ l |= FLD_VAL(ipc, 14, 14);
++ l |= FLD_VAL(ihs, 13, 13);
++ l |= FLD_VAL(ivs, 12, 12);
++ l |= FLD_VAL(acbi, 11, 8);
++ l |= FLD_VAL(acb, 7, 0);
++
++ enable_clocks(1);
++ dispc_write_reg(DISPC_POL_FREQ, l);
++ enable_clocks(0);
++}
++
++void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb)
++{
++ _dispc_set_pol_freq((config & OMAP_DSS_LCD_ONOFF) != 0,
++ (config & OMAP_DSS_LCD_RF) != 0,
++ (config & OMAP_DSS_LCD_IEO) != 0,
++ (config & OMAP_DSS_LCD_IPC) != 0,
++ (config & OMAP_DSS_LCD_IHS) != 0,
++ (config & OMAP_DSS_LCD_IVS) != 0,
++ acbi, acb);
++}
++
++void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
++ u16 *lck_div, u16 *pck_div)
++{
++ u16 pcd_min = is_tft ? 2 : 3;
++ unsigned long best_pck;
++ u16 best_ld, cur_ld;
++ u16 best_pd, cur_pd;
++
++ best_pck = 0;
++ best_ld = 0;
++ best_pd = 0;
++
++ for (cur_ld = 1; cur_ld <= 255; ++cur_ld) {
++ unsigned long lck = fck / cur_ld;
++
++ for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) {
++ unsigned long pck = lck / cur_pd;
++ long old_delta = abs(best_pck - req_pck);
++ long new_delta = abs(pck - req_pck);
++
++ if (best_pck == 0 || new_delta < old_delta) {
++ best_pck = pck;
++ best_ld = cur_ld;
++ best_pd = cur_pd;
++
++ if (pck == req_pck)
++ goto found;
++ }
++
++ if (pck < req_pck)
++ break;
++ }
++
++ if (lck / pcd_min < req_pck)
++ break;
++ }
++
++found:
++ *lck_div = best_ld;
++ *pck_div = best_pd;
++}
++
++int dispc_calc_clock_div(bool is_tft, unsigned long req_pck,
++ struct dispc_clock_info *cinfo)
++{
++ unsigned long prate;
++ struct dispc_clock_info cur, best;
++ int match = 0;
++ int min_fck_per_pck;
++ unsigned long fck_rate = dss_clk_get_rate(DSS_CLK_FCK1);
++
++ if (cpu_is_omap34xx())
++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck));
++ else
++ prate = 0;
++
++ if (req_pck == dispc.cache_req_pck &&
++ ((cpu_is_omap34xx() && prate == dispc.cache_prate) ||
++ dispc.cache_cinfo.fck == fck_rate)) {
++ DSSDBG("dispc clock info found from cache.\n");
++ *cinfo = dispc.cache_cinfo;
++ return 0;
++ }
++
++ min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK;
++
++ if (min_fck_per_pck &&
++ req_pck * min_fck_per_pck > DISPC_MAX_FCK) {
++ DSSERR("Requested pixel clock not possible with the current "
++ "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning "
++ "the constraint off.\n");
++ min_fck_per_pck = 0;
++ }
++
++retry:
++ memset(&cur, 0, sizeof(cur));
++ memset(&best, 0, sizeof(best));
++
++ if (cpu_is_omap24xx()) {
++ /* XXX can we change the clock on omap2? */
++ cur.fck = dss_clk_get_rate(DSS_CLK_FCK1);
++ cur.fck_div = 1;
++
++ match = 1;
++
++ find_lck_pck_divs(is_tft, req_pck, cur.fck,
++ &cur.lck_div, &cur.pck_div);
++
++ cur.lck = cur.fck / cur.lck_div;
++ cur.pck = cur.lck / cur.pck_div;
++
++ best = cur;
++
++ goto found;
++ } else if (cpu_is_omap34xx()) {
++ for (cur.fck_div = 16; cur.fck_div > 0; --cur.fck_div) {
++ cur.fck = prate / cur.fck_div * 2;
++
++ if (cur.fck > DISPC_MAX_FCK)
++ continue;
++
++ if (min_fck_per_pck &&
++ cur.fck < req_pck * min_fck_per_pck)
++ continue;
++
++ match = 1;
++
++ find_lck_pck_divs(is_tft, req_pck, cur.fck,
++ &cur.lck_div, &cur.pck_div);
++
++ cur.lck = cur.fck / cur.lck_div;
++ cur.pck = cur.lck / cur.pck_div;
++
++ if (abs(cur.pck - req_pck) < abs(best.pck - req_pck)) {
++ best = cur;
++
++ if (cur.pck == req_pck)
++ goto found;
++ }
++ }
++ } else {
++ BUG();
++ }
++
++found:
++ if (!match) {
++ if (min_fck_per_pck) {
++ DSSERR("Could not find suitable clock settings.\n"
++ "Turning FCK/PCK constraint off and"
++ "trying again.\n");
++ min_fck_per_pck = 0;
++ goto retry;
++ }
++
++ DSSERR("Could not find suitable clock settings.\n");
++
++ return -EINVAL;
++ }
++
++ if (cinfo)
++ *cinfo = best;
++
++ dispc.cache_req_pck = req_pck;
++ dispc.cache_prate = prate;
++ dispc.cache_cinfo = best;
++
++ return 0;
++}
++
++int dispc_set_clock_div(struct dispc_clock_info *cinfo)
++{
++ unsigned long prate;
++ int r;
++
++ if (cpu_is_omap34xx()) {
++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck));
++ DSSDBG("dpll4_m4 = %ld\n", prate);
++ }
++
++ DSSDBG("fck = %ld (%d)\n", cinfo->fck, cinfo->fck_div);
++ DSSDBG("lck = %ld (%d)\n", cinfo->lck, cinfo->lck_div);
++ DSSDBG("pck = %ld (%d)\n", cinfo->pck, cinfo->pck_div);
++
++ if (cpu_is_omap34xx()) {
++ r = clk_set_rate(dispc.dpll4_m4_ck, prate / cinfo->fck_div);
++ if (r)
++ return r;
++ }
++
++ dispc_set_lcd_divisor(cinfo->lck_div, cinfo->pck_div);
++
++ return 0;
++}
++
++int dispc_get_clock_div(struct dispc_clock_info *cinfo)
++{
++ cinfo->fck = dss_clk_get_rate(DSS_CLK_FCK1);
++
++ if (cpu_is_omap34xx()) {
++ unsigned long prate;
++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck));
++ cinfo->fck_div = prate / (cinfo->fck / 2);
++ } else {
++ cinfo->fck_div = 0;
++ }
++
++ cinfo->lck_div = REG_GET(DISPC_DIVISOR, 23, 16);
++ cinfo->pck_div = REG_GET(DISPC_DIVISOR, 7, 0);
++
++ cinfo->lck = cinfo->fck / cinfo->lck_div;
++ cinfo->pck = cinfo->lck / cinfo->pck_div;
++
++ return 0;
++}
++
++/* dispc.irq_lock has to be locked by the caller */
++static void _omap_dispc_set_irqs(void)
++{
++ u32 mask;
++ u32 old_mask;
++ int i;
++ struct omap_dispc_isr_data *isr_data;
++
++ mask = dispc.irq_error_mask;
++
++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
++ isr_data = &dispc.registered_isr[i];
++
++ if (isr_data->isr == NULL)
++ continue;
++
++ mask |= isr_data->mask;
++ }
++
++ enable_clocks(1);
++
++ old_mask = dispc_read_reg(DISPC_IRQENABLE);
++ /* clear the irqstatus for newly enabled irqs */
++ dispc_write_reg(DISPC_IRQSTATUS, (mask ^ old_mask) & mask);
++
++ dispc_write_reg(DISPC_IRQENABLE, mask);
++
++ enable_clocks(0);
++}
++
++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
++{
++ int i;
++ int ret;
++ unsigned long flags;
++ struct omap_dispc_isr_data *isr_data;
++
++ if (isr == NULL)
++ return -EINVAL;
++
++ spin_lock_irqsave(&dispc.irq_lock, flags);
++
++ /* check for duplicate entry */
++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
++ isr_data = &dispc.registered_isr[i];
++ if (isr_data->isr == isr && isr_data->arg == arg &&
++ isr_data->mask == mask) {
++ ret = -EINVAL;
++ goto err;
++ }
++ }
++
++ isr_data = NULL;
++ ret = -EBUSY;
++
++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
++ isr_data = &dispc.registered_isr[i];
++
++ if (isr_data->isr != NULL)
++ continue;
++
++ isr_data->isr = isr;
++ isr_data->arg = arg;
++ isr_data->mask = mask;
++ ret = 0;
++
++ break;
++ }
++
++ _omap_dispc_set_irqs();
++
++ spin_unlock_irqrestore(&dispc.irq_lock, flags);
++
++ return 0;
++err:
++ spin_unlock_irqrestore(&dispc.irq_lock, flags);
++
++ return ret;
++}
++EXPORT_SYMBOL(omap_dispc_register_isr);
++
++int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
++{
++ int i;
++ unsigned long flags;
++ int ret = -EINVAL;
++ struct omap_dispc_isr_data *isr_data;
++
++ spin_lock_irqsave(&dispc.irq_lock, flags);
++
++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
++ isr_data = &dispc.registered_isr[i];
++ if (isr_data->isr != isr || isr_data->arg != arg ||
++ isr_data->mask != mask)
++ continue;
++
++ /* found the correct isr */
++
++ isr_data->isr = NULL;
++ isr_data->arg = NULL;
++ isr_data->mask = 0;
++
++ ret = 0;
++ break;
++ }
++
++ if (ret == 0)
++ _omap_dispc_set_irqs();
++
++ spin_unlock_irqrestore(&dispc.irq_lock, flags);
++
++ return ret;
++}
++EXPORT_SYMBOL(omap_dispc_unregister_isr);
++
++#ifdef DEBUG
++static void print_irq_status(u32 status)
++{
++ if ((status & dispc.irq_error_mask) == 0)
++ return;
++
++ printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status);
++
++#define PIS(x) \
++ if (status & DISPC_IRQ_##x) \
++ printk(#x " ");
++ PIS(GFX_FIFO_UNDERFLOW);
++ PIS(OCP_ERR);
++ PIS(VID1_FIFO_UNDERFLOW);
++ PIS(VID2_FIFO_UNDERFLOW);
++ PIS(SYNC_LOST);
++ PIS(SYNC_LOST_DIGIT);
++#undef PIS
++
++ printk("\n");
++}
++#endif
++
++/* Called from dss.c. Note that we don't touch clocks here,
++ * but we presume they are on because we got an IRQ. However,
++ * an irq handler may turn the clocks off, so we may not have
++ * clock later in the function. */
++void dispc_irq_handler(void)
++{
++ int i;
++ u32 irqstatus;
++ u32 handledirqs = 0;
++ u32 unhandled_errors;
++ struct omap_dispc_isr_data *isr_data;
++ struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS];
++
++ spin_lock(&dispc.irq_lock);
++
++ irqstatus = dispc_read_reg(DISPC_IRQSTATUS);
++
++#ifdef DEBUG
++ if (dss_debug)
++ print_irq_status(irqstatus);
++#endif
++ /* Ack the interrupt. Do it here before clocks are possibly turned
++ * off */
++ dispc_write_reg(DISPC_IRQSTATUS, irqstatus);
++
++ /* make a copy and unlock, so that isrs can unregister
++ * themselves */
++ memcpy(registered_isr, dispc.registered_isr,
++ sizeof(registered_isr));
++
++ spin_unlock(&dispc.irq_lock);
++
++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
++ isr_data = ®istered_isr[i];
++
++ if (!isr_data->isr)
++ continue;
++
++ if (isr_data->mask & irqstatus) {
++ isr_data->isr(isr_data->arg, irqstatus);
++ handledirqs |= isr_data->mask;
++ }
++ }
++
++ spin_lock(&dispc.irq_lock);
++
++ unhandled_errors = irqstatus & ~handledirqs & dispc.irq_error_mask;
++
++ if (unhandled_errors) {
++ dispc.error_irqs |= unhandled_errors;
++
++ dispc.irq_error_mask &= ~unhandled_errors;
++ _omap_dispc_set_irqs();
++
++ schedule_work(&dispc.error_work);
++ }
++
++ spin_unlock(&dispc.irq_lock);
++}
++
++static void dispc_error_worker(struct work_struct *work)
++{
++ int i;
++ u32 errors;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dispc.irq_lock, flags);
++ errors = dispc.error_irqs;
++ dispc.error_irqs = 0;
++ spin_unlock_irqrestore(&dispc.irq_lock, flags);
++
++ if (errors & DISPC_IRQ_GFX_FIFO_UNDERFLOW) {
++ DSSERR("GFX_FIFO_UNDERFLOW, disabling GFX\n");
++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++ struct omap_overlay *ovl;
++ ovl = omap_dss_get_overlay(i);
++
++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++ continue;
++
++ if (ovl->id == 0) {
++ dispc_enable_plane(ovl->id, 0);
++ dispc_go(ovl->manager->id);
++ mdelay(50);
++ break;
++ }
++ }
++ }
++
++ if (errors & DISPC_IRQ_VID1_FIFO_UNDERFLOW) {
++ DSSERR("VID1_FIFO_UNDERFLOW, disabling VID1\n");
++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++ struct omap_overlay *ovl;
++ ovl = omap_dss_get_overlay(i);
++
++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++ continue;
++
++ if (ovl->id == 1) {
++ dispc_enable_plane(ovl->id, 0);
++ dispc_go(ovl->manager->id);
++ mdelay(50);
++ break;
++ }
++ }
++ }
++
++ if (errors & DISPC_IRQ_VID2_FIFO_UNDERFLOW) {
++ DSSERR("VID2_FIFO_UNDERFLOW, disabling VID2\n");
++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++ struct omap_overlay *ovl;
++ ovl = omap_dss_get_overlay(i);
++
++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++ continue;
++
++ if (ovl->id == 2) {
++ dispc_enable_plane(ovl->id, 0);
++ dispc_go(ovl->manager->id);
++ mdelay(50);
++ break;
++ }
++ }
++ }
++
++ if (errors & DISPC_IRQ_SYNC_LOST) {
++ struct omap_overlay_manager *manager = NULL;
++ bool enable = false;
++
++ DSSERR("SYNC_LOST, disabling LCD\n");
++
++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
++ struct omap_overlay_manager *mgr;
++ mgr = omap_dss_get_overlay_manager(i);
++
++ if (mgr->id == OMAP_DSS_CHANNEL_LCD) {
++ manager = mgr;
++ enable = mgr->device->state ==
++ OMAP_DSS_DISPLAY_ACTIVE;
++ mgr->device->disable(mgr->device);
++ break;
++ }
++ }
++
++ if (manager) {
++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++ struct omap_overlay *ovl;
++ ovl = omap_dss_get_overlay(i);
++
++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++ continue;
++
++ if (ovl->id != 0 && ovl->manager == manager)
++ dispc_enable_plane(ovl->id, 0);
++ }
++
++ dispc_go(manager->id);
++ mdelay(50);
++ if (enable)
++ manager->device->enable(manager->device);
++ }
++ }
++
++ if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) {
++ struct omap_overlay_manager *manager = NULL;
++ bool enable = false;
++
++ DSSERR("SYNC_LOST_DIGIT, disabling TV\n");
++
++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
++ struct omap_overlay_manager *mgr;
++ mgr = omap_dss_get_overlay_manager(i);
++
++ if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) {
++ manager = mgr;
++ enable = mgr->device->state ==
++ OMAP_DSS_DISPLAY_ACTIVE;
++ mgr->device->disable(mgr->device);
++ break;
++ }
++ }
++
++ if (manager) {
++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++ struct omap_overlay *ovl;
++ ovl = omap_dss_get_overlay(i);
++
++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++ continue;
++
++ if (ovl->id != 0 && ovl->manager == manager)
++ dispc_enable_plane(ovl->id, 0);
++ }
++
++ dispc_go(manager->id);
++ mdelay(50);
++ if (enable)
++ manager->device->enable(manager->device);
++ }
++ }
++
++ if (errors & DISPC_IRQ_OCP_ERR) {
++ DSSERR("OCP_ERR\n");
++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
++ struct omap_overlay_manager *mgr;
++ mgr = omap_dss_get_overlay_manager(i);
++
++ if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC)
++ mgr->device->disable(mgr->device);
++ }
++ }
++
++ spin_lock_irqsave(&dispc.irq_lock, flags);
++ dispc.irq_error_mask |= errors;
++ _omap_dispc_set_irqs();
++ spin_unlock_irqrestore(&dispc.irq_lock, flags);
++}
++
++int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout)
++{
++ void dispc_irq_wait_handler(void *data, u32 mask)
++ {
++ complete((struct completion *)data);
++ }
++
++ int r;
++ DECLARE_COMPLETION_ONSTACK(completion);
++
++ r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion,
++ irqmask);
++
++ if (r)
++ return r;
++
++ timeout = wait_for_completion_timeout(&completion, timeout);
++
++ omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask);
++
++ if (timeout == 0)
++ return -ETIMEDOUT;
++
++ if (timeout == -ERESTARTSYS)
++ return -ERESTARTSYS;
++
++ return 0;
++}
++
++int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
++ unsigned long timeout)
++{
++ void dispc_irq_wait_handler(void *data, u32 mask)
++ {
++ complete((struct completion *)data);
++ }
++
++ int r;
++ DECLARE_COMPLETION_ONSTACK(completion);
++
++ r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion,
++ irqmask);
++
++ if (r)
++ return r;
++
++ timeout = wait_for_completion_interruptible_timeout(&completion,
++ timeout);
++
++ omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask);
++
++ if (timeout == 0)
++ return -ETIMEDOUT;
++
++ if (timeout == -ERESTARTSYS)
++ return -ERESTARTSYS;
++
++ return 0;
++}
++
++#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
++void dispc_fake_vsync_irq(void)
++{
++ u32 irqstatus = DISPC_IRQ_VSYNC;
++ int i;
++
++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
++ struct omap_dispc_isr_data *isr_data;
++ isr_data = &dispc.registered_isr[i];
++
++ if (!isr_data->isr)
++ continue;
++
++ if (isr_data->mask & irqstatus)
++ isr_data->isr(isr_data->arg, irqstatus);
++ }
++}
++#endif
++
++static void _omap_dispc_initialize_irq(void)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&dispc.irq_lock, flags);
++
++ memset(dispc.registered_isr, 0, sizeof(dispc.registered_isr));
++
++ dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR;
++
++ /* there's SYNC_LOST_DIGIT waiting after enabling the DSS,
++ * so clear it */
++ dispc_write_reg(DISPC_IRQSTATUS, dispc_read_reg(DISPC_IRQSTATUS));
++
++ _omap_dispc_set_irqs();
++
++ spin_unlock_irqrestore(&dispc.irq_lock, flags);
++}
++
++void dispc_enable_sidle(void)
++{
++ REG_FLD_MOD(DISPC_SYSCONFIG, 2, 4, 3); /* SIDLEMODE: smart idle */
++}
++
++void dispc_disable_sidle(void)
++{
++ REG_FLD_MOD(DISPC_SYSCONFIG, 1, 4, 3); /* SIDLEMODE: no idle */
++}
++
++static void _omap_dispc_initial_config(void)
++{
++ u32 l;
++
++ l = dispc_read_reg(DISPC_SYSCONFIG);
++ l = FLD_MOD(l, 2, 13, 12); /* MIDLEMODE: smart standby */
++ l = FLD_MOD(l, 2, 4, 3); /* SIDLEMODE: smart idle */
++ l = FLD_MOD(l, 1, 2, 2); /* ENWAKEUP */
++ l = FLD_MOD(l, 1, 0, 0); /* AUTOIDLE */
++ dispc_write_reg(DISPC_SYSCONFIG, l);
++
++ /* FUNCGATED */
++ REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
++
++ /* L3 firewall setting: enable access to OCM RAM */
++ if (cpu_is_omap24xx())
++ __raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0));
++
++ _dispc_setup_color_conv_coef();
++
++ dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
++
++ dispc_read_plane_fifo_sizes();
++}
++
++int dispc_init(void)
++{
++ u32 rev;
++
++ spin_lock_init(&dispc.irq_lock);
++
++ INIT_WORK(&dispc.error_work, dispc_error_worker);
++
++ dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS);
++ if (!dispc.base) {
++ DSSERR("can't ioremap DISPC\n");
++ return -ENOMEM;
++ }
++
++ if (cpu_is_omap34xx()) {
++ dispc.dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck");
++ if (IS_ERR(dispc.dpll4_m4_ck)) {
++ DSSERR("Failed to get dpll4_m4_ck\n");
++ return -ENODEV;
++ }
++ }
++
++ enable_clocks(1);
++
++ _omap_dispc_initial_config();
++
++ _omap_dispc_initialize_irq();
++
++ dispc_save_context();
++
++ rev = dispc_read_reg(DISPC_REVISION);
++ printk(KERN_INFO "OMAP DISPC rev %d.%d\n",
++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
++
++ enable_clocks(0);
++
++ return 0;
++}
++
++void dispc_exit(void)
++{
++ if (cpu_is_omap34xx())
++ clk_put(dispc.dpll4_m4_ck);
++ iounmap(dispc.base);
++}
++
++int dispc_enable_plane(enum omap_plane plane, bool enable)
++{
++ DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
++
++ enable_clocks(1);
++ _dispc_enable_plane(plane, enable);
++ enable_clocks(0);
++
++ return 0;
++}
++
++int dispc_setup_plane(enum omap_plane plane,
++ u32 paddr, u16 screen_width,
++ u16 pos_x, u16 pos_y,
++ u16 width, u16 height,
++ u16 out_width, u16 out_height,
++ enum omap_color_mode color_mode,
++ bool ilace,
++ enum omap_dss_rotation_type rotation_type,
++ u8 rotation, bool mirror, u8 global_alpha)
++{
++ int r = 0;
++
++ DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %dx%d -> "
++ "%dx%d, ilace %d, cmode %x, rot %d, mir %d\n",
++ plane, paddr, screen_width, pos_x, pos_y,
++ width, height,
++ out_width, out_height,
++ ilace, color_mode,
++ rotation, mirror);
++
++ enable_clocks(1);
++
++ r = _dispc_setup_plane(plane,
++ paddr, screen_width,
++ pos_x, pos_y,
++ width, height,
++ out_width, out_height,
++ color_mode, ilace,
++ rotation_type,
++ rotation, mirror,
++ global_alpha);
++
++ enable_clocks(0);
++
++ return r;
++}
+diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
+new file mode 100644
+index 0000000..6b5d0cf
+--- /dev/null
++++ b/drivers/video/omap2/dss/display.c
+@@ -0,0 +1,658 @@
++/*
++ * linux/drivers/video/omap2/dss/display.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "DISPLAY"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/jiffies.h>
++#include <linux/list.h>
++#include <linux/platform_device.h>
++
++#include <mach/display.h>
++#include "dss.h"
++
++static LIST_HEAD(display_list);
++
++static ssize_t display_enabled_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ bool enabled = dssdev->state != OMAP_DSS_DISPLAY_DISABLED;
++
++ return snprintf(buf, PAGE_SIZE, "%d\n", enabled);
++}
++
++static ssize_t display_enabled_store(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t size)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ bool enabled, r;
++
++ enabled = simple_strtoul(buf, NULL, 10);
++
++ if (enabled != (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)) {
++ if (enabled) {
++ r = dssdev->enable(dssdev);
++ if (r)
++ return r;
++ } else {
++ dssdev->disable(dssdev);
++ }
++ }
++
++ return size;
++}
++
++static ssize_t display_upd_mode_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ enum omap_dss_update_mode mode = OMAP_DSS_UPDATE_AUTO;
++ if (dssdev->get_update_mode)
++ mode = dssdev->get_update_mode(dssdev);
++ return snprintf(buf, PAGE_SIZE, "%d\n", mode);
++}
++
++static ssize_t display_upd_mode_store(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t size)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ int val, r;
++ enum omap_dss_update_mode mode;
++
++ val = simple_strtoul(buf, NULL, 10);
++
++ switch (val) {
++ case OMAP_DSS_UPDATE_DISABLED:
++ case OMAP_DSS_UPDATE_AUTO:
++ case OMAP_DSS_UPDATE_MANUAL:
++ mode = (enum omap_dss_update_mode)val;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ r = dssdev->set_update_mode(dssdev, mode);
++ if (r)
++ return r;
++
++ return size;
++}
++
++static ssize_t display_tear_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ return snprintf(buf, PAGE_SIZE, "%d\n",
++ dssdev->get_te ? dssdev->get_te(dssdev) : 0);
++}
++
++static ssize_t display_tear_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t size)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ unsigned long te;
++ int r;
++
++ if (!dssdev->enable_te || !dssdev->get_te)
++ return -ENOENT;
++
++ te = simple_strtoul(buf, NULL, 0);
++
++ r = dssdev->enable_te(dssdev, te);
++ if (r)
++ return r;
++
++ return size;
++}
++
++static ssize_t display_timings_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ struct omap_video_timings t;
++
++ if (!dssdev->get_timings)
++ return -ENOENT;
++
++ dssdev->get_timings(dssdev, &t);
++
++ return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n",
++ t.pixel_clock,
++ t.x_res, t.hfp, t.hbp, t.hsw,
++ t.y_res, t.vfp, t.vbp, t.vsw);
++}
++
++static ssize_t display_timings_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t size)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ struct omap_video_timings t;
++ int r, found;
++
++ if (!dssdev->set_timings || !dssdev->check_timings)
++ return -ENOENT;
++
++ found = 0;
++#ifdef CONFIG_OMAP2_DSS_VENC
++ if (strncmp("pal", buf, 3) == 0) {
++ t = omap_dss_pal_timings;
++ found = 1;
++ } else if (strncmp("ntsc", buf, 4) == 0) {
++ t = omap_dss_ntsc_timings;
++ found = 1;
++ }
++#endif
++ if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu",
++ &t.pixel_clock,
++ &t.x_res, &t.hfp, &t.hbp, &t.hsw,
++ &t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9)
++ return -EINVAL;
++
++ r = dssdev->check_timings(dssdev, &t);
++ if (r)
++ return r;
++
++ dssdev->set_timings(dssdev, &t);
++
++ return size;
++}
++
++static ssize_t display_rotate_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ int rotate;
++ if (!dssdev->get_rotate)
++ return -ENOENT;
++ rotate = dssdev->get_rotate(dssdev);
++ return snprintf(buf, PAGE_SIZE, "%u\n", rotate);
++}
++
++static ssize_t display_rotate_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t size)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ unsigned long rot;
++ int r;
++
++ if (!dssdev->set_rotate || !dssdev->get_rotate)
++ return -ENOENT;
++
++ rot = simple_strtoul(buf, NULL, 0);
++
++ r = dssdev->set_rotate(dssdev, rot);
++ if (r)
++ return r;
++
++ return size;
++}
++
++static ssize_t display_mirror_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ int mirror;
++ if (!dssdev->get_mirror)
++ return -ENOENT;
++ mirror = dssdev->get_mirror(dssdev);
++ return snprintf(buf, PAGE_SIZE, "%u\n", mirror);
++}
++
++static ssize_t display_mirror_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t size)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ unsigned long mirror;
++ int r;
++
++ if (!dssdev->set_mirror || !dssdev->get_mirror)
++ return -ENOENT;
++
++ mirror = simple_strtoul(buf, NULL, 0);
++
++ r = dssdev->set_mirror(dssdev, mirror);
++ if (r)
++ return r;
++
++ return size;
++}
++
++static ssize_t display_wss_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ unsigned int wss;
++
++ if (!dssdev->get_wss)
++ return -ENOENT;
++
++ wss = dssdev->get_wss(dssdev);
++
++ return snprintf(buf, PAGE_SIZE, "0x%05x\n", wss);
++}
++
++static ssize_t display_wss_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t size)
++{
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++ unsigned long wss;
++ int r;
++
++ if (!dssdev->get_wss || !dssdev->set_wss)
++ return -ENOENT;
++
++ if (strict_strtoul(buf, 0, &wss))
++ return -EINVAL;
++
++ if (wss > 0xfffff)
++ return -EINVAL;
++
++ r = dssdev->set_wss(dssdev, wss);
++ if (r)
++ return r;
++
++ return size;
++}
++
++static DEVICE_ATTR(enabled, S_IRUGO|S_IWUSR,
++ display_enabled_show, display_enabled_store);
++static DEVICE_ATTR(update_mode, S_IRUGO|S_IWUSR,
++ display_upd_mode_show, display_upd_mode_store);
++static DEVICE_ATTR(tear_elim, S_IRUGO|S_IWUSR,
++ display_tear_show, display_tear_store);
++static DEVICE_ATTR(timings, S_IRUGO|S_IWUSR,
++ display_timings_show, display_timings_store);
++static DEVICE_ATTR(rotate, S_IRUGO|S_IWUSR,
++ display_rotate_show, display_rotate_store);
++static DEVICE_ATTR(mirror, S_IRUGO|S_IWUSR,
++ display_mirror_show, display_mirror_store);
++static DEVICE_ATTR(wss, S_IRUGO|S_IWUSR,
++ display_wss_show, display_wss_store);
++
++static struct device_attribute *display_sysfs_attrs[] = {
++ &dev_attr_enabled,
++ &dev_attr_update_mode,
++ &dev_attr_tear_elim,
++ &dev_attr_timings,
++ &dev_attr_rotate,
++ &dev_attr_mirror,
++ &dev_attr_wss,
++ NULL
++};
++
++static void default_get_resolution(struct omap_dss_device *dssdev,
++ u16 *xres, u16 *yres)
++{
++ *xres = dssdev->panel.timings.x_res;
++ *yres = dssdev->panel.timings.y_res;
++}
++
++void default_get_overlay_fifo_thresholds(enum omap_plane plane,
++ u32 fifo_size, enum omap_burst_size *burst_size,
++ u32 *fifo_low, u32 *fifo_high)
++{
++ unsigned burst_size_bytes;
++
++ *burst_size = OMAP_DSS_BURST_16x32;
++ burst_size_bytes = 16 * 32 / 8;
++
++ *fifo_high = fifo_size - 1;
++ *fifo_low = fifo_size - burst_size_bytes;
++}
++
++static int default_wait_vsync(struct omap_dss_device *dssdev)
++{
++ unsigned long timeout = msecs_to_jiffies(500);
++ u32 irq;
++
++ if (dssdev->type == OMAP_DISPLAY_TYPE_VENC)
++ irq = DISPC_IRQ_EVSYNC_ODD;
++ else
++ irq = DISPC_IRQ_VSYNC;
++
++ return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
++}
++
++static int default_get_recommended_bpp(struct omap_dss_device *dssdev)
++{
++ if (dssdev->panel.recommended_bpp)
++ return dssdev->panel.recommended_bpp;
++
++ switch (dssdev->type) {
++ case OMAP_DISPLAY_TYPE_DPI:
++ if (dssdev->phy.dpi.data_lines == 24)
++ return 24;
++ else
++ return 16;
++
++ case OMAP_DISPLAY_TYPE_DBI:
++ case OMAP_DISPLAY_TYPE_DSI:
++ if (dssdev->ctrl.pixel_size == 24)
++ return 24;
++ else
++ return 16;
++ case OMAP_DISPLAY_TYPE_VENC:
++ case OMAP_DISPLAY_TYPE_SDI:
++ return 24;
++ return 24;
++ default:
++ BUG();
++ }
++}
++
++/* Checks if replication logic should be used. Only use for active matrix,
++ * when overlay is in RGB12U or RGB16 mode, and LCD interface is
++ * 18bpp or 24bpp */
++bool dss_use_replication(struct omap_dss_device *dssdev,
++ enum omap_color_mode mode)
++{
++ int bpp;
++
++ if (mode != OMAP_DSS_COLOR_RGB12U && mode != OMAP_DSS_COLOR_RGB16)
++ return false;
++
++ if (dssdev->type == OMAP_DISPLAY_TYPE_DPI &&
++ (dssdev->panel.config & OMAP_DSS_LCD_TFT) == 0)
++ return false;
++
++ switch (dssdev->type) {
++ case OMAP_DISPLAY_TYPE_DPI:
++ bpp = dssdev->phy.dpi.data_lines;
++ break;
++ case OMAP_DISPLAY_TYPE_VENC:
++ case OMAP_DISPLAY_TYPE_SDI:
++ bpp = 24;
++ break;
++ case OMAP_DISPLAY_TYPE_DBI:
++ case OMAP_DISPLAY_TYPE_DSI:
++ bpp = dssdev->ctrl.pixel_size;
++ break;
++ default:
++ BUG();
++ }
++
++ return bpp > 16;
++}
++
++void dss_init_device(struct platform_device *pdev,
++ struct omap_dss_device *dssdev)
++{
++ struct device_attribute *attr;
++ int i;
++ int r;
++
++ switch (dssdev->type) {
++ case OMAP_DISPLAY_TYPE_DPI:
++#ifdef CONFIG_OMAP2_DSS_RFBI
++ case OMAP_DISPLAY_TYPE_DBI:
++#endif
++#ifdef CONFIG_OMAP2_DSS_SDI
++ case OMAP_DISPLAY_TYPE_SDI:
++#endif
++#ifdef CONFIG_OMAP2_DSS_DSI
++ case OMAP_DISPLAY_TYPE_DSI:
++#endif
++#ifdef CONFIG_OMAP2_DSS_VENC
++ case OMAP_DISPLAY_TYPE_VENC:
++#endif
++ break;
++ default:
++ DSSERR("Support for display '%s' not compiled in.\n",
++ dssdev->name);
++ return;
++ }
++
++ dssdev->get_resolution = default_get_resolution;
++ dssdev->get_recommended_bpp = default_get_recommended_bpp;
++ dssdev->wait_vsync = default_wait_vsync;
++
++ switch (dssdev->type) {
++ case OMAP_DISPLAY_TYPE_DPI:
++ r = dpi_init_display(dssdev);
++ break;
++#ifdef CONFIG_OMAP2_DSS_RFBI
++ case OMAP_DISPLAY_TYPE_DBI:
++ r = rfbi_init_display(dssdev);
++ break;
++#endif
++#ifdef CONFIG_OMAP2_DSS_VENC
++ case OMAP_DISPLAY_TYPE_VENC:
++ r = venc_init_display(dssdev);
++ break;
++#endif
++#ifdef CONFIG_OMAP2_DSS_SDI
++ case OMAP_DISPLAY_TYPE_SDI:
++ r = sdi_init_display(dssdev);
++ break;
++#endif
++#ifdef CONFIG_OMAP2_DSS_DSI
++ case OMAP_DISPLAY_TYPE_DSI:
++ r = dsi_init_display(dssdev);
++ break;
++#endif
++ default:
++ BUG();
++ }
++
++ if (r) {
++ DSSERR("failed to init display %s\n", dssdev->name);
++ return;
++ }
++
++ /* create device sysfs files */
++ i = 0;
++ while ((attr = display_sysfs_attrs[i++]) != NULL) {
++ r = device_create_file(&dssdev->dev, attr);
++ if (r)
++ DSSERR("failed to create sysfs file\n");
++ }
++
++ /* create display? sysfs links */
++ r = sysfs_create_link(&pdev->dev.kobj, &dssdev->dev.kobj,
++ dev_name(&dssdev->dev));
++ if (r)
++ DSSERR("failed to create sysfs display link\n");
++}
++
++void dss_uninit_device(struct platform_device *pdev,
++ struct omap_dss_device *dssdev)
++{
++ struct device_attribute *attr;
++ int i = 0;
++
++ sysfs_remove_link(&pdev->dev.kobj, dev_name(&dssdev->dev));
++
++ while ((attr = display_sysfs_attrs[i++]) != NULL)
++ device_remove_file(&dssdev->dev, attr);
++
++ if (dssdev->manager)
++ dssdev->manager->unset_device(dssdev->manager);
++}
++
++static int dss_suspend_device(struct device *dev, void *data)
++{
++ int r;
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
++ dssdev->activate_after_resume = false;
++ return 0;
++ }
++
++ if (!dssdev->suspend) {
++ DSSERR("display '%s' doesn't implement suspend\n",
++ dssdev->name);
++ return -ENOSYS;
++ }
++
++ r = dssdev->suspend(dssdev);
++ if (r)
++ return r;
++
++ dssdev->activate_after_resume = true;
++
++ return 0;
++}
++
++int dss_suspend_all_devices(void)
++{
++ int r;
++ struct bus_type *bus = dss_get_bus();
++
++ r = bus_for_each_dev(bus, NULL, NULL, dss_suspend_device);
++ if (r) {
++ /* resume all displays that were suspended */
++ dss_resume_all_devices();
++ return r;
++ }
++
++ return 0;
++}
++
++static int dss_resume_device(struct device *dev, void *data)
++{
++ int r;
++ struct omap_dss_device *dssdev = to_dss_device(dev);
++
++ if (dssdev->activate_after_resume && dssdev->resume) {
++ r = dssdev->resume(dssdev);
++ if (r)
++ return r;
++ }
++
++ dssdev->activate_after_resume = false;
++
++ return 0;
++}
++
++int dss_resume_all_devices(void)
++{
++ struct bus_type *bus = dss_get_bus();
++
++ return bus_for_each_dev(bus, NULL, NULL, dss_resume_device);
++}
++
++
++void omap_dss_get_device(struct omap_dss_device *dssdev)
++{
++ get_device(&dssdev->dev);
++}
++EXPORT_SYMBOL(omap_dss_get_device);
++
++void omap_dss_put_device(struct omap_dss_device *dssdev)
++{
++ put_device(&dssdev->dev);
++}
++EXPORT_SYMBOL(omap_dss_put_device);
++
++/* ref count of the found device is incremented. ref count
++ * of from-device is decremented. */
++struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from)
++{
++ struct device *dev;
++ struct device *dev_start = NULL;
++ struct omap_dss_device *dssdev = NULL;
++
++ int match(struct device *dev, void *data)
++ {
++ /* skip panels connected to controllers */
++ if (to_dss_device(dev)->panel.ctrl)
++ return 0;
++
++ return 1;
++ }
++
++ if (from)
++ dev_start = &from->dev;
++ dev = bus_find_device(dss_get_bus(), dev_start, NULL, match);
++ if (dev)
++ dssdev = to_dss_device(dev);
++ if (from)
++ put_device(&from->dev);
++
++ return dssdev;
++}
++EXPORT_SYMBOL(omap_dss_get_next_device);
++
++struct omap_dss_device *omap_dss_find_device(void *data,
++ int (*match)(struct omap_dss_device *dssdev, void *data))
++{
++ struct omap_dss_device *dssdev = NULL;
++
++ while ((dssdev = omap_dss_get_next_device(dssdev)) != NULL) {
++ if (match(dssdev, data))
++ return dssdev;
++ }
++
++ return NULL;
++}
++EXPORT_SYMBOL(omap_dss_find_device);
++
++int omap_dss_start_device(struct omap_dss_device *dssdev)
++{
++ int r;
++
++ if (!dssdev->driver) {
++ DSSDBG("no driver\n");
++ r = -ENODEV;
++ goto err0;
++ }
++
++ if (dssdev->ctrl.panel && !dssdev->ctrl.panel->driver) {
++ DSSDBG("no panel driver\n");
++ r = -ENODEV;
++ goto err0;
++ }
++
++ if (!try_module_get(dssdev->dev.driver->owner)) {
++ r = -ENODEV;
++ goto err0;
++ }
++
++ if (dssdev->ctrl.panel) {
++ if (!try_module_get(dssdev->ctrl.panel->dev.driver->owner)) {
++ r = -ENODEV;
++ goto err1;
++ }
++ }
++
++ return 0;
++err1:
++ module_put(dssdev->dev.driver->owner);
++err0:
++ return r;
++}
++EXPORT_SYMBOL(omap_dss_start_device);
++
++void omap_dss_stop_device(struct omap_dss_device *dssdev)
++{
++ if (dssdev->ctrl.panel)
++ module_put(dssdev->ctrl.panel->dev.driver->owner);
++
++ module_put(dssdev->dev.driver->owner);
++}
++EXPORT_SYMBOL(omap_dss_stop_device);
++
+diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
+new file mode 100644
+index 0000000..b6543c8
+--- /dev/null
++++ b/drivers/video/omap2/dss/dpi.c
+@@ -0,0 +1,388 @@
++/*
++ * linux/drivers/video/omap2/dss/dpi.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "DPI"
++
++#include <linux/kernel.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/errno.h>
++
++#include <mach/board.h>
++#include <mach/display.h>
++#include <mach/cpu.h>
++
++#include "dss.h"
++
++static struct {
++ int update_enabled;
++} dpi;
++
++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
++static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req,
++ unsigned long *fck, int *lck_div, int *pck_div)
++{
++ struct dsi_clock_info cinfo;
++ int r;
++
++ r = dsi_pll_calc_pck(is_tft, pck_req, &cinfo);
++ if (r)
++ return r;
++
++ r = dsi_pll_program(&cinfo);
++ if (r)
++ return r;
++
++ dss_select_clk_source(0, 1);
++
++ dispc_set_lcd_divisor(cinfo.lck_div, cinfo.pck_div);
++
++ *fck = cinfo.dsi1_pll_fclk;
++ *lck_div = cinfo.lck_div;
++ *pck_div = cinfo.pck_div;
++
++ return 0;
++}
++#else
++static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req,
++ unsigned long *fck, int *lck_div, int *pck_div)
++{
++ struct dispc_clock_info cinfo;
++ int r;
++
++ r = dispc_calc_clock_div(is_tft, pck_req, &cinfo);
++ if (r)
++ return r;
++
++ r = dispc_set_clock_div(&cinfo);
++ if (r)
++ return r;
++
++ *fck = cinfo.fck;
++ *lck_div = cinfo.lck_div;
++ *pck_div = cinfo.pck_div;
++
++ return 0;
++}
++#endif
++
++static int dpi_set_mode(struct omap_dss_device *dssdev)
++{
++ struct omap_video_timings *t = &dssdev->panel.timings;
++ int lck_div, pck_div;
++ unsigned long fck;
++ unsigned long pck;
++ bool is_tft;
++ int r = 0;
++
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi,
++ dssdev->panel.acb);
++
++ is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0;
++
++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
++ r = dpi_set_dsi_clk(is_tft, t->pixel_clock * 1000,
++ &fck, &lck_div, &pck_div);
++#else
++ r = dpi_set_dispc_clk(is_tft, t->pixel_clock * 1000,
++ &fck, &lck_div, &pck_div);
++#endif
++ if (r)
++ goto err0;
++
++ pck = fck / lck_div / pck_div / 1000;
++
++ if (pck != t->pixel_clock) {
++ DSSWARN("Could not find exact pixel clock. "
++ "Requested %d kHz, got %lu kHz\n",
++ t->pixel_clock, pck);
++
++ t->pixel_clock = pck;
++ }
++
++ dispc_set_lcd_timings(t);
++
++err0:
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++ return r;
++}
++
++static int dpi_basic_init(struct omap_dss_device *dssdev)
++{
++ bool is_tft;
++
++ is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0;
++
++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS);
++ dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT :
++ OMAP_DSS_LCD_DISPLAY_STN);
++ dispc_set_tft_data_lines(dssdev->phy.dpi.data_lines);
++
++ return 0;
++}
++
++static int dpi_display_enable(struct omap_dss_device *dssdev)
++{
++ int r;
++
++ r = omap_dss_start_device(dssdev);
++ if (r) {
++ DSSERR("failed to start device\n");
++ goto err0;
++ }
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
++ DSSERR("display already enabled\n");
++ r = -EINVAL;
++ goto err1;
++ }
++
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ r = dpi_basic_init(dssdev);
++ if (r)
++ goto err2;
++
++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
++ dss_clk_enable(DSS_CLK_FCK2);
++ r = dsi_pll_init(0, 1);
++ if (r)
++ goto err3;
++#endif
++ r = dpi_set_mode(dssdev);
++ if (r)
++ goto err4;
++
++ mdelay(2);
++
++ dispc_enable_lcd_out(1);
++
++ r = dssdev->driver->enable(dssdev);
++ if (r)
++ goto err5;
++
++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++ return 0;
++
++err5:
++ dispc_enable_lcd_out(0);
++err4:
++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
++ dsi_pll_uninit();
++err3:
++ dss_clk_disable(DSS_CLK_FCK2);
++#endif
++err2:
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++err1:
++ omap_dss_stop_device(dssdev);
++err0:
++ return r;
++}
++
++static int dpi_display_resume(struct omap_dss_device *dssdev);
++
++static void dpi_display_disable(struct omap_dss_device *dssdev)
++{
++ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
++ return;
++
++ if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
++ dpi_display_resume(dssdev);
++
++ dssdev->driver->disable(dssdev);
++
++ dispc_enable_lcd_out(0);
++
++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
++ dss_select_clk_source(0, 0);
++ dsi_pll_uninit();
++ dss_clk_disable(DSS_CLK_FCK2);
++#endif
++
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
++
++ omap_dss_stop_device(dssdev);
++}
++
++static int dpi_display_suspend(struct omap_dss_device *dssdev)
++{
++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
++ return -EINVAL;
++
++ DSSDBG("dpi_display_suspend\n");
++
++ if (dssdev->driver->suspend)
++ dssdev->driver->suspend(dssdev);
++
++ dispc_enable_lcd_out(0);
++
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
++
++ return 0;
++}
++
++static int dpi_display_resume(struct omap_dss_device *dssdev)
++{
++ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
++ return -EINVAL;
++
++ DSSDBG("dpi_display_resume\n");
++
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ dispc_enable_lcd_out(1);
++
++ if (dssdev->driver->resume)
++ dssdev->driver->resume(dssdev);
++
++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++ return 0;
++}
++
++static void dpi_set_timings(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings)
++{
++ DSSDBG("dpi_set_timings\n");
++ dssdev->panel.timings = *timings;
++ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
++ dpi_set_mode(dssdev);
++ dispc_go(OMAP_DSS_CHANNEL_LCD);
++ }
++}
++
++static int dpi_check_timings(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings)
++{
++ bool is_tft;
++ int r;
++ int lck_div, pck_div;
++ unsigned long fck;
++ unsigned long pck;
++
++ if (!dispc_lcd_timings_ok(timings))
++ return -EINVAL;
++
++ if (timings->pixel_clock == 0)
++ return -EINVAL;
++
++ is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0;
++
++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
++ {
++ struct dsi_clock_info cinfo;
++ r = dsi_pll_calc_pck(is_tft, timings->pixel_clock * 1000,
++ &cinfo);
++
++ if (r)
++ return r;
++
++ fck = cinfo.dsi1_pll_fclk;
++ lck_div = cinfo.lck_div;
++ pck_div = cinfo.pck_div;
++ }
++#else
++ {
++ struct dispc_clock_info cinfo;
++ r = dispc_calc_clock_div(is_tft, timings->pixel_clock * 1000,
++ &cinfo);
++
++ if (r)
++ return r;
++
++ fck = cinfo.fck;
++ lck_div = cinfo.lck_div;
++ pck_div = cinfo.pck_div;
++ }
++#endif
++
++ pck = fck / lck_div / pck_div / 1000;
++
++ timings->pixel_clock = pck;
++
++ return 0;
++}
++
++static void dpi_get_timings(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings)
++{
++ *timings = dssdev->panel.timings;
++}
++
++static int dpi_display_set_update_mode(struct omap_dss_device *dssdev,
++ enum omap_dss_update_mode mode)
++{
++ if (mode == OMAP_DSS_UPDATE_MANUAL)
++ return -EINVAL;
++
++ if (mode == OMAP_DSS_UPDATE_DISABLED) {
++ dispc_enable_lcd_out(0);
++ dpi.update_enabled = 0;
++ } else {
++ dispc_enable_lcd_out(1);
++ dpi.update_enabled = 1;
++ }
++
++ return 0;
++}
++
++static enum omap_dss_update_mode dpi_display_get_update_mode(
++ struct omap_dss_device *dssdev)
++{
++ return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO :
++ OMAP_DSS_UPDATE_DISABLED;
++}
++
++int dpi_init_display(struct omap_dss_device *dssdev)
++{
++ DSSDBG("init_display\n");
++
++ dssdev->enable = dpi_display_enable;
++ dssdev->disable = dpi_display_disable;
++ dssdev->suspend = dpi_display_suspend;
++ dssdev->resume = dpi_display_resume;
++ dssdev->set_timings = dpi_set_timings;
++ dssdev->check_timings = dpi_check_timings;
++ dssdev->get_timings = dpi_get_timings;
++ dssdev->set_update_mode = dpi_display_set_update_mode;
++ dssdev->get_update_mode = dpi_display_get_update_mode;
++
++ return 0;
++}
++
++int dpi_init(void)
++{
++ return 0;
++}
++
++void dpi_exit(void)
++{
++}
++
+diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
+new file mode 100644
+index 0000000..d43b9ce
+--- /dev/null
++++ b/drivers/video/omap2/dss/dsi.c
+@@ -0,0 +1,3509 @@
++/*
++ * linux/drivers/video/omap2/dss/dsi.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "DSI"
++
++#include <linux/kernel.h>
++#include <linux/io.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/mutex.h>
++#include <linux/seq_file.h>
++#include <linux/platform_device.h>
++#include <linux/regulator/consumer.h>
++#include <linux/kthread.h>
++#include <linux/wait.h>
++
++#include <mach/board.h>
++#include <mach/display.h>
++#include <mach/clock.h>
++
++#include "dss.h"
++
++/*#define VERBOSE_IRQ*/
++
++#define DSI_BASE 0x4804FC00
++
++struct dsi_reg { u16 idx; };
++
++#define DSI_REG(idx) ((const struct dsi_reg) { idx })
++
++#define DSI_SZ_REGS SZ_1K
++/* DSI Protocol Engine */
++
++#define DSI_REVISION DSI_REG(0x0000)
++#define DSI_SYSCONFIG DSI_REG(0x0010)
++#define DSI_SYSSTATUS DSI_REG(0x0014)
++#define DSI_IRQSTATUS DSI_REG(0x0018)
++#define DSI_IRQENABLE DSI_REG(0x001C)
++#define DSI_CTRL DSI_REG(0x0040)
++#define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048)
++#define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C)
++#define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050)
++#define DSI_CLK_CTRL DSI_REG(0x0054)
++#define DSI_TIMING1 DSI_REG(0x0058)
++#define DSI_TIMING2 DSI_REG(0x005C)
++#define DSI_VM_TIMING1 DSI_REG(0x0060)
++#define DSI_VM_TIMING2 DSI_REG(0x0064)
++#define DSI_VM_TIMING3 DSI_REG(0x0068)
++#define DSI_CLK_TIMING DSI_REG(0x006C)
++#define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070)
++#define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074)
++#define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078)
++#define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C)
++#define DSI_VM_TIMING4 DSI_REG(0x0080)
++#define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084)
++#define DSI_VM_TIMING5 DSI_REG(0x0088)
++#define DSI_VM_TIMING6 DSI_REG(0x008C)
++#define DSI_VM_TIMING7 DSI_REG(0x0090)
++#define DSI_STOPCLK_TIMING DSI_REG(0x0094)
++#define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20))
++#define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20))
++#define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20))
++#define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20))
++#define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20))
++#define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20))
++#define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20))
++
++/* DSIPHY_SCP */
++
++#define DSI_DSIPHY_CFG0 DSI_REG(0x200 + 0x0000)
++#define DSI_DSIPHY_CFG1 DSI_REG(0x200 + 0x0004)
++#define DSI_DSIPHY_CFG2 DSI_REG(0x200 + 0x0008)
++#define DSI_DSIPHY_CFG5 DSI_REG(0x200 + 0x0014)
++
++/* DSI_PLL_CTRL_SCP */
++
++#define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000)
++#define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004)
++#define DSI_PLL_GO DSI_REG(0x300 + 0x0008)
++#define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C)
++#define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010)
++
++#define REG_GET(idx, start, end) \
++ FLD_GET(dsi_read_reg(idx), start, end)
++
++#define REG_FLD_MOD(idx, val, start, end) \
++ dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end))
++
++/* Global interrupts */
++#define DSI_IRQ_VC0 (1 << 0)
++#define DSI_IRQ_VC1 (1 << 1)
++#define DSI_IRQ_VC2 (1 << 2)
++#define DSI_IRQ_VC3 (1 << 3)
++#define DSI_IRQ_WAKEUP (1 << 4)
++#define DSI_IRQ_RESYNC (1 << 5)
++#define DSI_IRQ_PLL_LOCK (1 << 7)
++#define DSI_IRQ_PLL_UNLOCK (1 << 8)
++#define DSI_IRQ_PLL_RECALL (1 << 9)
++#define DSI_IRQ_COMPLEXIO_ERR (1 << 10)
++#define DSI_IRQ_HS_TX_TIMEOUT (1 << 14)
++#define DSI_IRQ_LP_RX_TIMEOUT (1 << 15)
++#define DSI_IRQ_TE_TRIGGER (1 << 16)
++#define DSI_IRQ_ACK_TRIGGER (1 << 17)
++#define DSI_IRQ_SYNC_LOST (1 << 18)
++#define DSI_IRQ_LDO_POWER_GOOD (1 << 19)
++#define DSI_IRQ_TA_TIMEOUT (1 << 20)
++#define DSI_IRQ_ERROR_MASK \
++ (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \
++ DSI_IRQ_TA_TIMEOUT)
++#define DSI_IRQ_CHANNEL_MASK 0xf
++
++/* Virtual channel interrupts */
++#define DSI_VC_IRQ_CS (1 << 0)
++#define DSI_VC_IRQ_ECC_CORR (1 << 1)
++#define DSI_VC_IRQ_PACKET_SENT (1 << 2)
++#define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3)
++#define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4)
++#define DSI_VC_IRQ_BTA (1 << 5)
++#define DSI_VC_IRQ_ECC_NO_CORR (1 << 6)
++#define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7)
++#define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8)
++#define DSI_VC_IRQ_ERROR_MASK \
++ (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \
++ DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \
++ DSI_VC_IRQ_FIFO_TX_UDF)
++
++/* ComplexIO interrupts */
++#define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0)
++#define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1)
++#define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2)
++#define DSI_CIO_IRQ_ERRESC1 (1 << 5)
++#define DSI_CIO_IRQ_ERRESC2 (1 << 6)
++#define DSI_CIO_IRQ_ERRESC3 (1 << 7)
++#define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10)
++#define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11)
++#define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12)
++#define DSI_CIO_IRQ_STATEULPS1 (1 << 15)
++#define DSI_CIO_IRQ_STATEULPS2 (1 << 16)
++#define DSI_CIO_IRQ_STATEULPS3 (1 << 17)
++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20)
++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21)
++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22)
++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23)
++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24)
++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25)
++#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30)
++#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31)
++
++#define DSI_DT_DCS_SHORT_WRITE_0 0x05
++#define DSI_DT_DCS_SHORT_WRITE_1 0x15
++#define DSI_DT_DCS_READ 0x06
++#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37
++#define DSI_DT_NULL_PACKET 0x09
++#define DSI_DT_DCS_LONG_WRITE 0x39
++
++#define DSI_DT_RX_ACK_WITH_ERR 0x02
++#define DSI_DT_RX_DCS_LONG_READ 0x1c
++#define DSI_DT_RX_SHORT_READ_1 0x21
++#define DSI_DT_RX_SHORT_READ_2 0x22
++
++#define FINT_MAX 2100000
++#define FINT_MIN 750000
++#define REGN_MAX (1 << 7)
++#define REGM_MAX ((1 << 11) - 1)
++#define REGM3_MAX (1 << 4)
++#define REGM4_MAX (1 << 4)
++
++enum fifo_size {
++ DSI_FIFO_SIZE_0 = 0,
++ DSI_FIFO_SIZE_32 = 1,
++ DSI_FIFO_SIZE_64 = 2,
++ DSI_FIFO_SIZE_96 = 3,
++ DSI_FIFO_SIZE_128 = 4,
++};
++
++enum dsi_vc_mode {
++ DSI_VC_MODE_L4 = 0,
++ DSI_VC_MODE_VP,
++};
++
++struct dsi_update_region {
++ bool dirty;
++ u16 x, y, w, h;
++ struct omap_dss_device *device;
++};
++
++static struct
++{
++ void __iomem *base;
++
++ unsigned long dsi1_pll_fclk; /* Hz */
++ unsigned long dsi2_pll_fclk; /* Hz */
++ unsigned long dsiphy; /* Hz */
++ unsigned long ddr_clk; /* Hz */
++
++ struct regulator *vdds_dsi_reg;
++
++ struct {
++ enum dsi_vc_mode mode;
++ struct omap_dss_device *dssdev;
++ enum fifo_size fifo_size;
++ int dest_per; /* destination peripheral 0-3 */
++ } vc[4];
++
++ struct mutex lock;
++ struct mutex bus_lock;
++
++ unsigned pll_locked;
++
++ struct completion bta_completion;
++
++ struct task_struct *thread;
++ wait_queue_head_t waitqueue;
++
++ spinlock_t update_lock;
++ bool framedone_received;
++ struct dsi_update_region update_region;
++ struct dsi_update_region active_update_region;
++ struct completion update_completion;
++
++ enum omap_dss_update_mode user_update_mode;
++ enum omap_dss_update_mode update_mode;
++ bool te_enabled;
++ bool use_ext_te;
++
++ unsigned long cache_req_pck;
++ unsigned long cache_clk_freq;
++ struct dsi_clock_info cache_cinfo;
++
++ u32 errors;
++ spinlock_t errors_lock;
++#ifdef DEBUG
++ ktime_t perf_setup_time;
++ ktime_t perf_start_time;
++ ktime_t perf_start_time_auto;
++ int perf_measure_frames;
++#endif
++ int debug_read;
++ int debug_write;
++} dsi;
++
++#ifdef DEBUG
++static unsigned int dsi_perf;
++module_param_named(dsi_perf, dsi_perf, bool, 0644);
++#endif
++
++static inline void dsi_write_reg(const struct dsi_reg idx, u32 val)
++{
++ __raw_writel(val, dsi.base + idx.idx);
++}
++
++static inline u32 dsi_read_reg(const struct dsi_reg idx)
++{
++ return __raw_readl(dsi.base + idx.idx);
++}
++
++
++void dsi_save_context(void)
++{
++}
++
++void dsi_restore_context(void)
++{
++}
++
++void dsi_bus_lock(void)
++{
++ mutex_lock(&dsi.bus_lock);
++}
++EXPORT_SYMBOL(dsi_bus_lock);
++
++void dsi_bus_unlock(void)
++{
++ mutex_unlock(&dsi.bus_lock);
++}
++EXPORT_SYMBOL(dsi_bus_unlock);
++
++static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum,
++ int value)
++{
++ int t = 100000;
++
++ while (REG_GET(idx, bitnum, bitnum) != value) {
++ if (--t == 0)
++ return !value;
++ }
++
++ return value;
++}
++
++#ifdef DEBUG
++static void dsi_perf_mark_setup(void)
++{
++ dsi.perf_setup_time = ktime_get();
++}
++
++static void dsi_perf_mark_start(void)
++{
++ dsi.perf_start_time = ktime_get();
++}
++
++static void dsi_perf_mark_start_auto(void)
++{
++ dsi.perf_measure_frames = 0;
++ dsi.perf_start_time_auto = ktime_get();
++}
++
++static void dsi_perf_show(const char *name)
++{
++ ktime_t t, setup_time, trans_time;
++ u32 total_bytes;
++ u32 setup_us, trans_us, total_us;
++
++ if (!dsi_perf)
++ return;
++
++ if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED)
++ return;
++
++ t = ktime_get();
++
++ setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time);
++ setup_us = (u32)ktime_to_us(setup_time);
++ if (setup_us == 0)
++ setup_us = 1;
++
++ trans_time = ktime_sub(t, dsi.perf_start_time);
++ trans_us = (u32)ktime_to_us(trans_time);
++ if (trans_us == 0)
++ trans_us = 1;
++
++ total_us = setup_us + trans_us;
++
++ total_bytes = dsi.active_update_region.w *
++ dsi.active_update_region.h *
++ dsi.active_update_region.device->ctrl.pixel_size / 8;
++
++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) {
++ static u32 s_total_trans_us, s_total_setup_us;
++ static u32 s_min_trans_us = 0xffffffff, s_min_setup_us;
++ static u32 s_max_trans_us, s_max_setup_us;
++ const int numframes = 100;
++ ktime_t total_time_auto;
++ u32 total_time_auto_us;
++
++ dsi.perf_measure_frames++;
++
++ if (setup_us < s_min_setup_us)
++ s_min_setup_us = setup_us;
++
++ if (setup_us > s_max_setup_us)
++ s_max_setup_us = setup_us;
++
++ s_total_setup_us += setup_us;
++
++ if (trans_us < s_min_trans_us)
++ s_min_trans_us = trans_us;
++
++ if (trans_us > s_max_trans_us)
++ s_max_trans_us = trans_us;
++
++ s_total_trans_us += trans_us;
++
++ if (dsi.perf_measure_frames < numframes)
++ return;
++
++ total_time_auto = ktime_sub(t, dsi.perf_start_time_auto);
++ total_time_auto_us = (u32)ktime_to_us(total_time_auto);
++
++ printk(KERN_INFO "DSI(%s): %u fps, setup %u/%u/%u, "
++ "trans %u/%u/%u\n",
++ name,
++ 1000 * 1000 * numframes / total_time_auto_us,
++ s_min_setup_us,
++ s_max_setup_us,
++ s_total_setup_us / numframes,
++ s_min_trans_us,
++ s_max_trans_us,
++ s_total_trans_us / numframes);
++
++ s_total_setup_us = 0;
++ s_min_setup_us = 0xffffffff;
++ s_max_setup_us = 0;
++ s_total_trans_us = 0;
++ s_min_trans_us = 0xffffffff;
++ s_max_trans_us = 0;
++ dsi_perf_mark_start_auto();
++ } else {
++ printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), "
++ "%u bytes, %u kbytes/sec\n",
++ name,
++ setup_us,
++ trans_us,
++ total_us,
++ 1000*1000 / total_us,
++ total_bytes,
++ total_bytes * 1000 / total_us);
++ }
++}
++#else
++#define dsi_perf_mark_setup()
++#define dsi_perf_mark_start()
++#define dsi_perf_mark_start_auto()
++#define dsi_perf_show(x)
++#endif
++
++static void print_irq_status(u32 status)
++{
++#ifndef VERBOSE_IRQ
++ if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0)
++ return;
++#endif
++ printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status);
++
++#define PIS(x) \
++ if (status & DSI_IRQ_##x) \
++ printk(#x " ");
++#ifdef VERBOSE_IRQ
++ PIS(VC0);
++ PIS(VC1);
++ PIS(VC2);
++ PIS(VC3);
++#endif
++ PIS(WAKEUP);
++ PIS(RESYNC);
++ PIS(PLL_LOCK);
++ PIS(PLL_UNLOCK);
++ PIS(PLL_RECALL);
++ PIS(COMPLEXIO_ERR);
++ PIS(HS_TX_TIMEOUT);
++ PIS(LP_RX_TIMEOUT);
++ PIS(TE_TRIGGER);
++ PIS(ACK_TRIGGER);
++ PIS(SYNC_LOST);
++ PIS(LDO_POWER_GOOD);
++ PIS(TA_TIMEOUT);
++#undef PIS
++
++ printk("\n");
++}
++
++static void print_irq_status_vc(int channel, u32 status)
++{
++#ifndef VERBOSE_IRQ
++ if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0)
++ return;
++#endif
++ printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status);
++
++#define PIS(x) \
++ if (status & DSI_VC_IRQ_##x) \
++ printk(#x " ");
++ PIS(CS);
++ PIS(ECC_CORR);
++#ifdef VERBOSE_IRQ
++ PIS(PACKET_SENT);
++#endif
++ PIS(FIFO_TX_OVF);
++ PIS(FIFO_RX_OVF);
++ PIS(BTA);
++ PIS(ECC_NO_CORR);
++ PIS(FIFO_TX_UDF);
++ PIS(PP_BUSY_CHANGE);
++#undef PIS
++ printk("\n");
++}
++
++static void print_irq_status_cio(u32 status)
++{
++ printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status);
++
++#define PIS(x) \
++ if (status & DSI_CIO_IRQ_##x) \
++ printk(#x " ");
++ PIS(ERRSYNCESC1);
++ PIS(ERRSYNCESC2);
++ PIS(ERRSYNCESC3);
++ PIS(ERRESC1);
++ PIS(ERRESC2);
++ PIS(ERRESC3);
++ PIS(ERRCONTROL1);
++ PIS(ERRCONTROL2);
++ PIS(ERRCONTROL3);
++ PIS(STATEULPS1);
++ PIS(STATEULPS2);
++ PIS(STATEULPS3);
++ PIS(ERRCONTENTIONLP0_1);
++ PIS(ERRCONTENTIONLP1_1);
++ PIS(ERRCONTENTIONLP0_2);
++ PIS(ERRCONTENTIONLP1_2);
++ PIS(ERRCONTENTIONLP0_3);
++ PIS(ERRCONTENTIONLP1_3);
++ PIS(ULPSACTIVENOT_ALL0);
++ PIS(ULPSACTIVENOT_ALL1);
++#undef PIS
++
++ printk("\n");
++}
++
++static int debug_irq;
++
++/* called from dss */
++void dsi_irq_handler(void)
++{
++ u32 irqstatus, vcstatus, ciostatus;
++ int i;
++
++ irqstatus = dsi_read_reg(DSI_IRQSTATUS);
++
++ if (irqstatus & DSI_IRQ_ERROR_MASK) {
++ DSSERR("DSI error, irqstatus %x\n", irqstatus);
++ print_irq_status(irqstatus);
++ spin_lock(&dsi.errors_lock);
++ dsi.errors |= irqstatus & DSI_IRQ_ERROR_MASK;
++ spin_unlock(&dsi.errors_lock);
++ } else if (debug_irq) {
++ print_irq_status(irqstatus);
++ }
++
++ for (i = 0; i < 4; ++i) {
++ if ((irqstatus & (1<<i)) == 0)
++ continue;
++
++ vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i));
++
++ if (vcstatus & DSI_VC_IRQ_BTA)
++ complete(&dsi.bta_completion);
++
++ if (vcstatus & DSI_VC_IRQ_ERROR_MASK) {
++ DSSERR("DSI VC(%d) error, vc irqstatus %x\n",
++ i, vcstatus);
++ print_irq_status_vc(i, vcstatus);
++ } else if (debug_irq) {
++ print_irq_status_vc(i, vcstatus);
++ }
++
++ dsi_write_reg(DSI_VC_IRQSTATUS(i), vcstatus);
++ }
++
++ if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) {
++ ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
++
++ dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus);
++
++ DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
++ print_irq_status_cio(ciostatus);
++ }
++
++ dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK);
++}
++
++
++static void _dsi_initialize_irq(void)
++{
++ u32 l;
++ int i;
++
++ /* disable all interrupts */
++ dsi_write_reg(DSI_IRQENABLE, 0);
++ for (i = 0; i < 4; ++i)
++ dsi_write_reg(DSI_VC_IRQENABLE(i), 0);
++ dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, 0);
++
++ /* clear interrupt status */
++ l = dsi_read_reg(DSI_IRQSTATUS);
++ dsi_write_reg(DSI_IRQSTATUS, l & ~DSI_IRQ_CHANNEL_MASK);
++
++ for (i = 0; i < 4; ++i) {
++ l = dsi_read_reg(DSI_VC_IRQSTATUS(i));
++ dsi_write_reg(DSI_VC_IRQSTATUS(i), l);
++ }
++
++ l = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
++ dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, l);
++
++ /* enable error irqs */
++ l = DSI_IRQ_ERROR_MASK;
++ dsi_write_reg(DSI_IRQENABLE, l);
++
++ l = DSI_VC_IRQ_ERROR_MASK;
++ for (i = 0; i < 4; ++i)
++ dsi_write_reg(DSI_VC_IRQENABLE(i), l);
++
++ /* XXX zonda responds incorrectly, causing control error:
++ Exit from LP-ESC mode to LP11 uses wrong transition states on the
++ data lines LP0 and LN0. */
++ dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE,
++ -1 & (~DSI_CIO_IRQ_ERRCONTROL2));
++}
++
++static u32 dsi_get_errors(void)
++{
++ unsigned long flags;
++ u32 e;
++ spin_lock_irqsave(&dsi.errors_lock, flags);
++ e = dsi.errors;
++ dsi.errors = 0;
++ spin_unlock_irqrestore(&dsi.errors_lock, flags);
++ return e;
++}
++
++static void dsi_vc_enable_bta_irq(int channel)
++{
++ u32 l;
++
++ dsi_write_reg(DSI_VC_IRQSTATUS(channel), DSI_VC_IRQ_BTA);
++
++ l = dsi_read_reg(DSI_VC_IRQENABLE(channel));
++ l |= DSI_VC_IRQ_BTA;
++ dsi_write_reg(DSI_VC_IRQENABLE(channel), l);
++}
++
++static void dsi_vc_disable_bta_irq(int channel)
++{
++ u32 l;
++
++ l = dsi_read_reg(DSI_VC_IRQENABLE(channel));
++ l &= ~DSI_VC_IRQ_BTA;
++ dsi_write_reg(DSI_VC_IRQENABLE(channel), l);
++}
++
++/* DSI func clock. this could also be DSI2_PLL_FCLK */
++static inline void enable_clocks(bool enable)
++{
++ if (enable)
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++ else
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++}
++
++/* source clock for DSI PLL. this could also be PCLKFREE */
++static inline void dsi_enable_pll_clock(bool enable)
++{
++ if (enable)
++ dss_clk_enable(DSS_CLK_FCK2);
++ else
++ dss_clk_disable(DSS_CLK_FCK2);
++
++ if (enable && dsi.pll_locked) {
++ if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1)
++ DSSERR("cannot lock PLL when enabling clocks\n");
++ }
++}
++
++#ifdef DEBUG
++static void _dsi_print_reset_status(void)
++{
++ u32 l;
++
++ if (!dss_debug)
++ return;
++
++ /* A dummy read using the SCP interface to any DSIPHY register is
++ * required after DSIPHY reset to complete the reset of the DSI complex
++ * I/O. */
++ l = dsi_read_reg(DSI_DSIPHY_CFG5);
++
++ printk(KERN_DEBUG "DSI resets: ");
++
++ l = dsi_read_reg(DSI_PLL_STATUS);
++ printk("PLL (%d) ", FLD_GET(l, 0, 0));
++
++ l = dsi_read_reg(DSI_COMPLEXIO_CFG1);
++ printk("CIO (%d) ", FLD_GET(l, 29, 29));
++
++ l = dsi_read_reg(DSI_DSIPHY_CFG5);
++ printk("PHY (%x, %d, %d, %d)\n",
++ FLD_GET(l, 28, 26),
++ FLD_GET(l, 29, 29),
++ FLD_GET(l, 30, 30),
++ FLD_GET(l, 31, 31));
++}
++#else
++#define _dsi_print_reset_status()
++#endif
++
++static inline int dsi_if_enable(bool enable)
++{
++ DSSDBG("dsi_if_enable(%d)\n", enable);
++
++ enable = enable ? 1 : 0;
++ REG_FLD_MOD(DSI_CTRL, enable, 0, 0); /* IF_EN */
++
++ if (wait_for_bit_change(DSI_CTRL, 0, enable) != enable) {
++ DSSERR("Failed to set dsi_if_enable to %d\n", enable);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static unsigned long dsi_fclk_rate(void)
++{
++ unsigned long r;
++
++ if (dss_get_dsi_clk_source() == 0) {
++ /* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */
++ r = dss_clk_get_rate(DSS_CLK_FCK1);
++ } else {
++ /* DSI FCLK source is DSI2_PLL_FCLK */
++ r = dsi.dsi2_pll_fclk;
++ }
++
++ return r;
++}
++
++static int dsi_set_lp_clk_divisor(struct omap_dss_device *dssdev)
++{
++ unsigned n;
++ unsigned long dsi_fclk;
++ unsigned long lp_clk, lp_clk_req;
++
++ dsi_fclk = dsi_fclk_rate();
++
++ lp_clk_req = dssdev->phy.dsi.lp_clk_hz;
++
++ for (n = 1; n < (1 << 13) - 1; ++n) {
++ lp_clk = dsi_fclk / 2 / n;
++ if (lp_clk <= lp_clk_req)
++ break;
++ }
++
++ if (n == (1 << 13) - 1) {
++ DSSERR("Failed to find LP_CLK_DIVISOR\n");
++ return -EINVAL;
++ }
++
++ DSSDBG("LP_CLK_DIV %u, LP_CLK %lu (req %lu)\n", n, lp_clk, lp_clk_req);
++
++ REG_FLD_MOD(DSI_CLK_CTRL, n, 12, 0); /* LP_CLK_DIVISOR */
++ if (dsi_fclk > 30*1000*1000)
++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 21, 21); /* LP_RX_SYNCHRO_ENABLE */
++
++ return 0;
++}
++
++
++enum dsi_pll_power_state {
++ DSI_PLL_POWER_OFF = 0x0,
++ DSI_PLL_POWER_ON_HSCLK = 0x1,
++ DSI_PLL_POWER_ON_ALL = 0x2,
++ DSI_PLL_POWER_ON_DIV = 0x3,
++};
++
++static int dsi_pll_power(enum dsi_pll_power_state state)
++{
++ int t = 0;
++
++ REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */
++
++ /* PLL_PWR_STATUS */
++ while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) {
++ udelay(1);
++ if (t++ > 1000) {
++ DSSERR("Failed to set DSI PLL power mode to %d\n",
++ state);
++ return -ENODEV;
++ }
++ }
++
++ return 0;
++}
++
++int dsi_pll_calc_pck(bool is_tft, unsigned long req_pck,
++ struct dsi_clock_info *cinfo)
++{
++ struct dsi_clock_info cur, best;
++ int min_fck_per_pck;
++ int match = 0;
++ unsigned long dss_clk_fck2;
++
++ dss_clk_fck2 = dss_clk_get_rate(DSS_CLK_FCK2);
++
++ if (req_pck == dsi.cache_req_pck &&
++ dsi.cache_cinfo.clkin == dss_clk_fck2) {
++ DSSDBG("DSI clock info found from cache\n");
++ *cinfo = dsi.cache_cinfo;
++ return 0;
++ }
++
++ min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK;
++
++ if (min_fck_per_pck &&
++ req_pck * min_fck_per_pck > DISPC_MAX_FCK) {
++ DSSERR("Requested pixel clock not possible with the current "
++ "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning "
++ "the constraint off.\n");
++ min_fck_per_pck = 0;
++ }
++
++ DSSDBG("dsi_pll_calc\n");
++
++retry:
++ memset(&best, 0, sizeof(best));
++
++ memset(&cur, 0, sizeof(cur));
++ cur.clkin = dss_clk_fck2;
++ cur.use_dss2_fck = 1;
++ cur.highfreq = 0;
++
++ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */
++ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */
++ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */
++ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) {
++ if (cur.highfreq == 0)
++ cur.fint = cur.clkin / cur.regn;
++ else
++ cur.fint = cur.clkin / (2 * cur.regn);
++
++ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN)
++ continue;
++
++ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */
++ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) {
++ unsigned long a, b;
++
++ a = 2 * cur.regm * (cur.clkin/1000);
++ b = cur.regn * (cur.highfreq + 1);
++ cur.dsiphy = a / b * 1000;
++
++ if (cur.dsiphy > 1800 * 1000 * 1000)
++ break;
++
++ /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */
++ for (cur.regm3 = 1; cur.regm3 < REGM3_MAX;
++ ++cur.regm3) {
++ cur.dsi1_pll_fclk = cur.dsiphy / cur.regm3;
++
++ /* this will narrow down the search a bit,
++ * but still give pixclocks below what was
++ * requested */
++ if (cur.dsi1_pll_fclk < req_pck)
++ break;
++
++ if (cur.dsi1_pll_fclk > DISPC_MAX_FCK)
++ continue;
++
++ if (min_fck_per_pck &&
++ cur.dsi1_pll_fclk <
++ req_pck * min_fck_per_pck)
++ continue;
++
++ match = 1;
++
++ find_lck_pck_divs(is_tft, req_pck,
++ cur.dsi1_pll_fclk,
++ &cur.lck_div,
++ &cur.pck_div);
++
++ cur.lck = cur.dsi1_pll_fclk / cur.lck_div;
++ cur.pck = cur.lck / cur.pck_div;
++
++ if (abs(cur.pck - req_pck) <
++ abs(best.pck - req_pck)) {
++ best = cur;
++
++ if (cur.pck == req_pck)
++ goto found;
++ }
++ }
++ }
++ }
++found:
++ if (!match) {
++ if (min_fck_per_pck) {
++ DSSERR("Could not find suitable clock settings.\n"
++ "Turning FCK/PCK constraint off and"
++ "trying again.\n");
++ min_fck_per_pck = 0;
++ goto retry;
++ }
++
++ DSSERR("Could not find suitable clock settings.\n");
++
++ return -EINVAL;
++ }
++
++ /* DSI2_PLL_FCLK (regm4) is not used. Set it to something sane. */
++ best.regm4 = best.dsiphy / 48000000;
++ if (best.regm4 > REGM4_MAX)
++ best.regm4 = REGM4_MAX;
++ else if (best.regm4 == 0)
++ best.regm4 = 1;
++ best.dsi2_pll_fclk = best.dsiphy / best.regm4;
++
++ if (cinfo)
++ *cinfo = best;
++
++ dsi.cache_req_pck = req_pck;
++ dsi.cache_clk_freq = 0;
++ dsi.cache_cinfo = best;
++
++ return 0;
++}
++
++static int dsi_pll_calc_ddrfreq(unsigned long clk_freq,
++ struct dsi_clock_info *cinfo)
++{
++ struct dsi_clock_info cur, best;
++ const bool use_dss2_fck = 1;
++ unsigned long datafreq;
++ unsigned long dss_clk_fck2;
++
++ DSSDBG("dsi_pll_calc_ddrfreq\n");
++
++ dss_clk_fck2 = dss_clk_get_rate(DSS_CLK_FCK2);
++
++ if (clk_freq == dsi.cache_clk_freq &&
++ dsi.cache_cinfo.clkin == dss_clk_fck2) {
++ DSSDBG("DSI clock info found from cache\n");
++ *cinfo = dsi.cache_cinfo;
++ return 0;
++ }
++
++ datafreq = clk_freq * 4;
++
++ memset(&best, 0, sizeof(best));
++
++ memset(&cur, 0, sizeof(cur));
++ cur.use_dss2_fck = use_dss2_fck;
++ if (use_dss2_fck) {
++ cur.clkin = dss_clk_fck2;
++ cur.highfreq = 0;
++ } else {
++ cur.clkin = dispc_pclk_rate();
++ if (cur.clkin < 32000000)
++ cur.highfreq = 0;
++ else
++ cur.highfreq = 1;
++ }
++
++ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */
++ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */
++ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */
++ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) {
++ if (cur.highfreq == 0)
++ cur.fint = cur.clkin / cur.regn;
++ else
++ cur.fint = cur.clkin / (2 * cur.regn);
++
++ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN)
++ continue;
++
++ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */
++ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) {
++ unsigned long a, b;
++
++ a = 2 * cur.regm * (cur.clkin/1000);
++ b = cur.regn * (cur.highfreq + 1);
++ cur.dsiphy = a / b * 1000;
++
++ if (cur.dsiphy > 1800 * 1000 * 1000)
++ break;
++
++ if (abs(cur.dsiphy - datafreq) <
++ abs(best.dsiphy - datafreq)) {
++ best = cur;
++ /* DSSDBG("best %ld\n", best.dsiphy); */
++ }
++
++ if (cur.dsiphy == datafreq)
++ goto found;
++ }
++ }
++found:
++ /* DSI1_PLL_FCLK (regm3) is not used. Set it to something sane. */
++ best.regm3 = best.dsiphy / 48000000;
++ if (best.regm3 > REGM3_MAX)
++ best.regm3 = REGM3_MAX;
++ else if (best.regm3 == 0)
++ best.regm3 = 1;
++ best.dsi1_pll_fclk = best.dsiphy / best.regm3;
++
++ /* DSI2_PLL_FCLK (regm4) is not used. Set it to something sane. */
++ best.regm4 = best.dsiphy / 48000000;
++ if (best.regm4 > REGM4_MAX)
++ best.regm4 = REGM4_MAX;
++ else if (best.regm4 == 0)
++ best.regm4 = 1;
++ best.dsi2_pll_fclk = best.dsiphy / best.regm4;
++
++ if (cinfo)
++ *cinfo = best;
++
++ dsi.cache_clk_freq = clk_freq;
++ dsi.cache_req_pck = 0;
++ dsi.cache_cinfo = best;
++
++ return 0;
++}
++
++int dsi_pll_program(struct dsi_clock_info *cinfo)
++{
++ int r = 0;
++ u32 l;
++
++ DSSDBG("dsi_pll_program\n");
++
++ dsi.dsiphy = cinfo->dsiphy;
++ dsi.ddr_clk = dsi.dsiphy / 4;
++ dsi.dsi1_pll_fclk = cinfo->dsi1_pll_fclk;
++ dsi.dsi2_pll_fclk = cinfo->dsi2_pll_fclk;
++
++ DSSDBG("DSI Fint %ld\n", cinfo->fint);
++
++ DSSDBG("clkin (%s) rate %ld, highfreq %d\n",
++ cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree",
++ cinfo->clkin,
++ cinfo->highfreq);
++
++ /* DSIPHY == CLKIN4DDR */
++ DSSDBG("DSIPHY = 2 * %d / %d * %lu / %d = %lu\n",
++ cinfo->regm,
++ cinfo->regn,
++ cinfo->clkin,
++ cinfo->highfreq + 1,
++ cinfo->dsiphy);
++
++ DSSDBG("Data rate on 1 DSI lane %ld Mbps\n",
++ dsi.dsiphy / 1000 / 1000 / 2);
++
++ DSSDBG("Clock lane freq %ld Hz\n", dsi.ddr_clk);
++
++ DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n",
++ cinfo->regm3, cinfo->dsi1_pll_fclk);
++ DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n",
++ cinfo->regm4, cinfo->dsi2_pll_fclk);
++
++ REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */
++
++ l = dsi_read_reg(DSI_PLL_CONFIGURATION1);
++ l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */
++ l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */
++ l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */
++ l = FLD_MOD(l, cinfo->regm3 - 1, 22, 19); /* DSI_CLOCK_DIV */
++ l = FLD_MOD(l, cinfo->regm4 - 1, 26, 23); /* DSIPROTO_CLOCK_DIV */
++ dsi_write_reg(DSI_PLL_CONFIGURATION1, l);
++
++ l = dsi_read_reg(DSI_PLL_CONFIGURATION2);
++ l = FLD_MOD(l, 7, 4, 1); /* DSI_PLL_FREQSEL */
++ /* DSI_PLL_CLKSEL */
++ l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, 11, 11);
++ l = FLD_MOD(l, cinfo->highfreq, 12, 12); /* DSI_PLL_HIGHFREQ */
++ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */
++ l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */
++ l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */
++ dsi_write_reg(DSI_PLL_CONFIGURATION2, l);
++
++ REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */
++
++ if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) {
++ DSSERR("dsi pll go bit not going down.\n");
++ r = -EIO;
++ goto err;
++ }
++
++ if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) {
++ DSSERR("cannot lock PLL\n");
++ r = -EIO;
++ goto err;
++ }
++
++ dsi.pll_locked = 1;
++
++ l = dsi_read_reg(DSI_PLL_CONFIGURATION2);
++ l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */
++ l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */
++ l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */
++ l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */
++ l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */
++ l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */
++ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */
++ l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */
++ l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */
++ l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */
++ l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */
++ l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */
++ l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */
++ l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */
++ dsi_write_reg(DSI_PLL_CONFIGURATION2, l);
++
++ DSSDBG("PLL config done\n");
++err:
++ return r;
++}
++
++int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv)
++{
++ int r = 0;
++ enum dsi_pll_power_state pwstate;
++ struct dispc_clock_info cinfo;
++
++ DSSDBG("PLL init\n");
++
++ enable_clocks(1);
++ dsi_enable_pll_clock(1);
++
++ /* XXX this should be calculated depending on the screen size,
++ * required framerate and DSI speed.
++ * For now 48MHz is enough for 864x480@60 with 360Mbps/lane
++ * with two lanes */
++ r = dispc_calc_clock_div(1, 48 * 1000 * 1000, &cinfo);
++ if (r)
++ goto err0;
++
++ r = dispc_set_clock_div(&cinfo);
++ if (r) {
++ DSSERR("Failed to set basic clocks\n");
++ goto err0;
++ }
++
++ r = regulator_enable(dsi.vdds_dsi_reg);
++ if (r)
++ goto err0;
++
++ /* XXX PLL does not come out of reset without this... */
++ dispc_pck_free_enable(1);
++
++ if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) {
++ DSSERR("PLL not coming out of reset.\n");
++ r = -ENODEV;
++ goto err1;
++ }
++
++ /* XXX ... but if left on, we get problems when planes do not
++ * fill the whole display. No idea about this */
++ dispc_pck_free_enable(0);
++
++ if (enable_hsclk && enable_hsdiv)
++ pwstate = DSI_PLL_POWER_ON_ALL;
++ else if (enable_hsclk)
++ pwstate = DSI_PLL_POWER_ON_HSCLK;
++ else if (enable_hsdiv)
++ pwstate = DSI_PLL_POWER_ON_DIV;
++ else
++ pwstate = DSI_PLL_POWER_OFF;
++
++ r = dsi_pll_power(pwstate);
++
++ if (r)
++ goto err1;
++
++ DSSDBG("PLL init done\n");
++
++ return 0;
++err1:
++ regulator_disable(dsi.vdds_dsi_reg);
++err0:
++ enable_clocks(0);
++ dsi_enable_pll_clock(0);
++ return r;
++}
++
++void dsi_pll_uninit(void)
++{
++ enable_clocks(0);
++ dsi_enable_pll_clock(0);
++
++ dsi.pll_locked = 0;
++ dsi_pll_power(DSI_PLL_POWER_OFF);
++ regulator_disable(dsi.vdds_dsi_reg);
++ DSSDBG("PLL uninit done\n");
++}
++
++unsigned long dsi_get_dsi1_pll_rate(void)
++{
++ return dsi.dsi1_pll_fclk;
++}
++
++unsigned long dsi_get_dsi2_pll_rate(void)
++{
++ return dsi.dsi2_pll_fclk;
++}
++
++void dsi_dump_clocks(struct seq_file *s)
++{
++ int clksel;
++
++ enable_clocks(1);
++
++ clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11);
++
++ seq_printf(s, "- dsi -\n");
++
++ seq_printf(s, "dsi fclk source = %s\n",
++ dss_get_dsi_clk_source() == 0 ?
++ "dss1_alwon_fclk" : "dsi2_pll_fclk");
++
++ seq_printf(s, "dsi pll source = %s\n",
++ clksel == 0 ?
++ "dss2_alwon_fclk" : "pclkfree");
++
++ seq_printf(s, "DSIPHY\t\t%lu\nDDR_CLK\t\t%lu\n",
++ dsi.dsiphy, dsi.ddr_clk);
++
++ seq_printf(s, "dsi1_pll_fck\t%lu (%s)\n"
++ "dsi2_pll_fck\t%lu (%s)\n",
++ dsi.dsi1_pll_fclk,
++ dss_get_dispc_clk_source() == 0 ? "off" : "on",
++ dsi.dsi2_pll_fclk,
++ dss_get_dsi_clk_source() == 0 ? "off" : "on");
++
++ enable_clocks(0);
++}
++
++void dsi_dump_regs(struct seq_file *s)
++{
++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r))
++
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ DUMPREG(DSI_REVISION);
++ DUMPREG(DSI_SYSCONFIG);
++ DUMPREG(DSI_SYSSTATUS);
++ DUMPREG(DSI_IRQSTATUS);
++ DUMPREG(DSI_IRQENABLE);
++ DUMPREG(DSI_CTRL);
++ DUMPREG(DSI_COMPLEXIO_CFG1);
++ DUMPREG(DSI_COMPLEXIO_IRQ_STATUS);
++ DUMPREG(DSI_COMPLEXIO_IRQ_ENABLE);
++ DUMPREG(DSI_CLK_CTRL);
++ DUMPREG(DSI_TIMING1);
++ DUMPREG(DSI_TIMING2);
++ DUMPREG(DSI_VM_TIMING1);
++ DUMPREG(DSI_VM_TIMING2);
++ DUMPREG(DSI_VM_TIMING3);
++ DUMPREG(DSI_CLK_TIMING);
++ DUMPREG(DSI_TX_FIFO_VC_SIZE);
++ DUMPREG(DSI_RX_FIFO_VC_SIZE);
++ DUMPREG(DSI_COMPLEXIO_CFG2);
++ DUMPREG(DSI_RX_FIFO_VC_FULLNESS);
++ DUMPREG(DSI_VM_TIMING4);
++ DUMPREG(DSI_TX_FIFO_VC_EMPTINESS);
++ DUMPREG(DSI_VM_TIMING5);
++ DUMPREG(DSI_VM_TIMING6);
++ DUMPREG(DSI_VM_TIMING7);
++ DUMPREG(DSI_STOPCLK_TIMING);
++
++ DUMPREG(DSI_VC_CTRL(0));
++ DUMPREG(DSI_VC_TE(0));
++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(0));
++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(0));
++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(0));
++ DUMPREG(DSI_VC_IRQSTATUS(0));
++ DUMPREG(DSI_VC_IRQENABLE(0));
++
++ DUMPREG(DSI_VC_CTRL(1));
++ DUMPREG(DSI_VC_TE(1));
++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(1));
++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(1));
++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(1));
++ DUMPREG(DSI_VC_IRQSTATUS(1));
++ DUMPREG(DSI_VC_IRQENABLE(1));
++
++ DUMPREG(DSI_VC_CTRL(2));
++ DUMPREG(DSI_VC_TE(2));
++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(2));
++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(2));
++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(2));
++ DUMPREG(DSI_VC_IRQSTATUS(2));
++ DUMPREG(DSI_VC_IRQENABLE(2));
++
++ DUMPREG(DSI_VC_CTRL(3));
++ DUMPREG(DSI_VC_TE(3));
++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(3));
++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(3));
++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(3));
++ DUMPREG(DSI_VC_IRQSTATUS(3));
++ DUMPREG(DSI_VC_IRQENABLE(3));
++
++ DUMPREG(DSI_DSIPHY_CFG0);
++ DUMPREG(DSI_DSIPHY_CFG1);
++ DUMPREG(DSI_DSIPHY_CFG2);
++ DUMPREG(DSI_DSIPHY_CFG5);
++
++ DUMPREG(DSI_PLL_CONTROL);
++ DUMPREG(DSI_PLL_STATUS);
++ DUMPREG(DSI_PLL_GO);
++ DUMPREG(DSI_PLL_CONFIGURATION1);
++ DUMPREG(DSI_PLL_CONFIGURATION2);
++
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++#undef DUMPREG
++}
++
++enum dsi_complexio_power_state {
++ DSI_COMPLEXIO_POWER_OFF = 0x0,
++ DSI_COMPLEXIO_POWER_ON = 0x1,
++ DSI_COMPLEXIO_POWER_ULPS = 0x2,
++};
++
++static int dsi_complexio_power(enum dsi_complexio_power_state state)
++{
++ int t = 0;
++
++ /* PWR_CMD */
++ REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27);
++
++ /* PWR_STATUS */
++ while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) {
++ udelay(1);
++ if (t++ > 1000) {
++ DSSERR("failed to set complexio power state to "
++ "%d\n", state);
++ return -ENODEV;
++ }
++ }
++
++ return 0;
++}
++
++static void dsi_complexio_config(struct omap_dss_device *dssdev)
++{
++ u32 r;
++
++ int clk_lane = dssdev->phy.dsi.clk_lane;
++ int data1_lane = dssdev->phy.dsi.data1_lane;
++ int data2_lane = dssdev->phy.dsi.data2_lane;
++ int clk_pol = dssdev->phy.dsi.clk_pol;
++ int data1_pol = dssdev->phy.dsi.data1_pol;
++ int data2_pol = dssdev->phy.dsi.data2_pol;
++
++ r = dsi_read_reg(DSI_COMPLEXIO_CFG1);
++ r = FLD_MOD(r, clk_lane, 2, 0);
++ r = FLD_MOD(r, clk_pol, 3, 3);
++ r = FLD_MOD(r, data1_lane, 6, 4);
++ r = FLD_MOD(r, data1_pol, 7, 7);
++ r = FLD_MOD(r, data2_lane, 10, 8);
++ r = FLD_MOD(r, data2_pol, 11, 11);
++ dsi_write_reg(DSI_COMPLEXIO_CFG1, r);
++
++ /* The configuration of the DSI complex I/O (number of data lanes,
++ position, differential order) should not be changed while
++ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for
++ the hardware to take into account a new configuration of the complex
++ I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to
++ follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1,
++ then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set
++ DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the
++ DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the
++ DSI complex I/O configuration is unknown. */
++
++ /*
++ REG_FLD_MOD(DSI_CTRL, 1, 0, 0);
++ REG_FLD_MOD(DSI_CTRL, 0, 0, 0);
++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20);
++ REG_FLD_MOD(DSI_CTRL, 1, 0, 0);
++ */
++}
++
++static inline unsigned ns2ddr(unsigned ns)
++{
++ /* convert time in ns to ddr ticks, rounding up */
++ return (ns * (dsi.ddr_clk/1000/1000) + 999) / 1000;
++}
++
++static inline unsigned ddr2ns(unsigned ddr)
++{
++ return ddr * 1000 * 1000 / (dsi.ddr_clk / 1000);
++}
++
++static void dsi_complexio_timings(void)
++{
++ u32 r;
++ u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit;
++ u32 tlpx_half, tclk_trail, tclk_zero;
++ u32 tclk_prepare;
++
++ /* calculate timings */
++
++ /* 1 * DDR_CLK = 2 * UI */
++
++ /* min 40ns + 4*UI max 85ns + 6*UI */
++ ths_prepare = ns2ddr(70) + 2;
++
++ /* min 145ns + 10*UI */
++ ths_prepare_ths_zero = ns2ddr(175) + 2;
++
++ /* min max(8*UI, 60ns+4*UI) */
++ ths_trail = ns2ddr(60) + 5;
++
++ /* min 100ns */
++ ths_exit = ns2ddr(145);
++
++ /* tlpx min 50n */
++ tlpx_half = ns2ddr(25);
++
++ /* min 60ns */
++ tclk_trail = ns2ddr(60) + 2;
++
++ /* min 38ns, max 95ns */
++ tclk_prepare = ns2ddr(65);
++
++ /* min tclk-prepare + tclk-zero = 300ns */
++ tclk_zero = ns2ddr(260);
++
++ DSSDBG("ths_prepare %u (%uns), ths_prepare_ths_zero %u (%uns)\n",
++ ths_prepare, ddr2ns(ths_prepare),
++ ths_prepare_ths_zero, ddr2ns(ths_prepare_ths_zero));
++ DSSDBG("ths_trail %u (%uns), ths_exit %u (%uns)\n",
++ ths_trail, ddr2ns(ths_trail),
++ ths_exit, ddr2ns(ths_exit));
++
++ DSSDBG("tlpx_half %u (%uns), tclk_trail %u (%uns), "
++ "tclk_zero %u (%uns)\n",
++ tlpx_half, ddr2ns(tlpx_half),
++ tclk_trail, ddr2ns(tclk_trail),
++ tclk_zero, ddr2ns(tclk_zero));
++ DSSDBG("tclk_prepare %u (%uns)\n",
++ tclk_prepare, ddr2ns(tclk_prepare));
++
++ /* program timings */
++
++ r = dsi_read_reg(DSI_DSIPHY_CFG0);
++ r = FLD_MOD(r, ths_prepare, 31, 24);
++ r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16);
++ r = FLD_MOD(r, ths_trail, 15, 8);
++ r = FLD_MOD(r, ths_exit, 7, 0);
++ dsi_write_reg(DSI_DSIPHY_CFG0, r);
++
++ r = dsi_read_reg(DSI_DSIPHY_CFG1);
++ r = FLD_MOD(r, tlpx_half, 22, 16);
++ r = FLD_MOD(r, tclk_trail, 15, 8);
++ r = FLD_MOD(r, tclk_zero, 7, 0);
++ dsi_write_reg(DSI_DSIPHY_CFG1, r);
++
++ r = dsi_read_reg(DSI_DSIPHY_CFG2);
++ r = FLD_MOD(r, tclk_prepare, 7, 0);
++ dsi_write_reg(DSI_DSIPHY_CFG2, r);
++}
++
++
++static int dsi_complexio_init(struct omap_dss_device *dssdev)
++{
++ int r = 0;
++
++ DSSDBG("dsi_complexio_init\n");
++
++ /* CIO_CLK_ICG, enable L3 clk to CIO */
++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14);
++
++ /* A dummy read using the SCP interface to any DSIPHY register is
++ * required after DSIPHY reset to complete the reset of the DSI complex
++ * I/O. */
++ dsi_read_reg(DSI_DSIPHY_CFG5);
++
++ if (wait_for_bit_change(DSI_DSIPHY_CFG5, 30, 1) != 1) {
++ DSSERR("ComplexIO PHY not coming out of reset.\n");
++ r = -ENODEV;
++ goto err;
++ }
++
++ dsi_complexio_config(dssdev);
++
++ r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON);
++
++ if (r)
++ goto err;
++
++ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) {
++ DSSERR("ComplexIO not coming out of reset.\n");
++ r = -ENODEV;
++ goto err;
++ }
++
++ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) {
++ DSSERR("ComplexIO LDO power down.\n");
++ r = -ENODEV;
++ goto err;
++ }
++
++ dsi_complexio_timings();
++
++ /*
++ The configuration of the DSI complex I/O (number of data lanes,
++ position, differential order) should not be changed while
++ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the
++ hardware to recognize a new configuration of the complex I/O (done
++ in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow
++ this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next
++ reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20]
++ LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN
++ bit to 1. If the sequence is not followed, the DSi complex I/O
++ configuration is undetermined.
++ */
++ dsi_if_enable(1);
++ dsi_if_enable(0);
++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */
++ dsi_if_enable(1);
++ dsi_if_enable(0);
++
++ DSSDBG("CIO init done\n");
++err:
++ return r;
++}
++
++static void dsi_complexio_uninit(void)
++{
++ dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF);
++}
++
++static int _dsi_wait_reset(void)
++{
++ int i = 0;
++
++ while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) {
++ if (i++ > 5) {
++ DSSERR("soft reset failed\n");
++ return -ENODEV;
++ }
++ udelay(1);
++ }
++
++ return 0;
++}
++
++static int _dsi_reset(void)
++{
++ /* Soft reset */
++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1);
++ return _dsi_wait_reset();
++}
++
++
++static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2,
++ enum fifo_size size3, enum fifo_size size4)
++{
++ u32 r = 0;
++ int add = 0;
++ int i;
++
++ dsi.vc[0].fifo_size = size1;
++ dsi.vc[1].fifo_size = size2;
++ dsi.vc[2].fifo_size = size3;
++ dsi.vc[3].fifo_size = size4;
++
++ for (i = 0; i < 4; i++) {
++ u8 v;
++ int size = dsi.vc[i].fifo_size;
++
++ if (add + size > 4) {
++ DSSERR("Illegal FIFO configuration\n");
++ BUG();
++ }
++
++ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4);
++ r |= v << (8 * i);
++ /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */
++ add += size;
++ }
++
++ dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r);
++}
++
++static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2,
++ enum fifo_size size3, enum fifo_size size4)
++{
++ u32 r = 0;
++ int add = 0;
++ int i;
++
++ dsi.vc[0].fifo_size = size1;
++ dsi.vc[1].fifo_size = size2;
++ dsi.vc[2].fifo_size = size3;
++ dsi.vc[3].fifo_size = size4;
++
++ for (i = 0; i < 4; i++) {
++ u8 v;
++ int size = dsi.vc[i].fifo_size;
++
++ if (add + size > 4) {
++ DSSERR("Illegal FIFO configuration\n");
++ BUG();
++ }
++
++ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4);
++ r |= v << (8 * i);
++ /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */
++ add += size;
++ }
++
++ dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r);
++}
++
++static int dsi_force_tx_stop_mode_io(void)
++{
++ u32 r;
++
++ r = dsi_read_reg(DSI_TIMING1);
++ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */
++ dsi_write_reg(DSI_TIMING1, r);
++
++ if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) {
++ DSSERR("TX_STOP bit not going down\n");
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static void dsi_vc_print_status(int channel)
++{
++ u32 r;
++
++ r = dsi_read_reg(DSI_VC_CTRL(channel));
++ DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, "
++ "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ",
++ channel,
++ FLD_GET(r, 5, 5),
++ FLD_GET(r, 6, 6),
++ FLD_GET(r, 15, 15),
++ FLD_GET(r, 16, 16),
++ FLD_GET(r, 20, 20));
++
++ r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS);
++ DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff);
++}
++
++static int dsi_vc_enable(int channel, bool enable)
++{
++ if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
++ DSSDBG("dsi_vc_enable channel %d, enable %d\n",
++ channel, enable);
++
++ enable = enable ? 1 : 0;
++
++ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0);
++
++ if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) {
++ DSSERR("Failed to set dsi_vc_enable to %d\n", enable);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static void dsi_vc_initial_config(int channel)
++{
++ u32 r;
++
++ DSSDBGF("%d", channel);
++
++ r = dsi_read_reg(DSI_VC_CTRL(channel));
++
++ if (FLD_GET(r, 15, 15)) /* VC_BUSY */
++ DSSERR("VC(%d) busy when trying to configure it!\n",
++ channel);
++
++ r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */
++ r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */
++ r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */
++ r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */
++ r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */
++ r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */
++ r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */
++
++ r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */
++ r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */
++
++ dsi_write_reg(DSI_VC_CTRL(channel), r);
++
++ dsi.vc[channel].mode = DSI_VC_MODE_L4;
++}
++
++static void dsi_vc_config_l4(int channel)
++{
++ if (dsi.vc[channel].mode == DSI_VC_MODE_L4)
++ return;
++
++ DSSDBGF("%d", channel);
++
++ dsi_vc_enable(channel, 0);
++
++ if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */
++ DSSERR("vc(%d) busy when trying to config for L4\n", channel);
++
++ REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */
++
++ dsi_vc_enable(channel, 1);
++
++ dsi.vc[channel].mode = DSI_VC_MODE_L4;
++}
++
++static void dsi_vc_config_vp(int channel)
++{
++ if (dsi.vc[channel].mode == DSI_VC_MODE_VP)
++ return;
++
++ DSSDBGF("%d", channel);
++
++ dsi_vc_enable(channel, 0);
++
++ if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */
++ DSSERR("vc(%d) busy when trying to config for VP\n", channel);
++
++ REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */
++
++ dsi_vc_enable(channel, 1);
++
++ dsi.vc[channel].mode = DSI_VC_MODE_VP;
++}
++
++
++static void dsi_vc_enable_hs(int channel, bool enable)
++{
++ DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable);
++
++ dsi_vc_enable(channel, 0);
++ dsi_if_enable(0);
++
++ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9);
++
++ dsi_vc_enable(channel, 1);
++ dsi_if_enable(1);
++
++ dsi_force_tx_stop_mode_io();
++}
++
++static void dsi_vc_flush_long_data(int channel)
++{
++ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
++ u32 val;
++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
++ DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n",
++ (val >> 0) & 0xff,
++ (val >> 8) & 0xff,
++ (val >> 16) & 0xff,
++ (val >> 24) & 0xff);
++ }
++}
++
++static void dsi_show_rx_ack_with_err(u16 err)
++{
++ DSSERR("\tACK with ERROR (%#x):\n", err);
++ if (err & (1 << 0))
++ DSSERR("\t\tSoT Error\n");
++ if (err & (1 << 1))
++ DSSERR("\t\tSoT Sync Error\n");
++ if (err & (1 << 2))
++ DSSERR("\t\tEoT Sync Error\n");
++ if (err & (1 << 3))
++ DSSERR("\t\tEscape Mode Entry Command Error\n");
++ if (err & (1 << 4))
++ DSSERR("\t\tLP Transmit Sync Error\n");
++ if (err & (1 << 5))
++ DSSERR("\t\tHS Receive Timeout Error\n");
++ if (err & (1 << 6))
++ DSSERR("\t\tFalse Control Error\n");
++ if (err & (1 << 7))
++ DSSERR("\t\t(reserved7)\n");
++ if (err & (1 << 8))
++ DSSERR("\t\tECC Error, single-bit (corrected)\n");
++ if (err & (1 << 9))
++ DSSERR("\t\tECC Error, multi-bit (not corrected)\n");
++ if (err & (1 << 10))
++ DSSERR("\t\tChecksum Error\n");
++ if (err & (1 << 11))
++ DSSERR("\t\tData type not recognized\n");
++ if (err & (1 << 12))
++ DSSERR("\t\tInvalid VC ID\n");
++ if (err & (1 << 13))
++ DSSERR("\t\tInvalid Transmission Length\n");
++ if (err & (1 << 14))
++ DSSERR("\t\t(reserved14)\n");
++ if (err & (1 << 15))
++ DSSERR("\t\tDSI Protocol Violation\n");
++}
++
++static u16 dsi_vc_flush_receive_data(int channel)
++{
++ /* RX_FIFO_NOT_EMPTY */
++ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
++ u32 val;
++ u8 dt;
++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
++ DSSDBG("\trawval %#08x\n", val);
++ dt = FLD_GET(val, 5, 0);
++ if (dt == DSI_DT_RX_ACK_WITH_ERR) {
++ u16 err = FLD_GET(val, 23, 8);
++ dsi_show_rx_ack_with_err(err);
++ } else if (dt == DSI_DT_RX_SHORT_READ_1) {
++ DSSDBG("\tDCS short response, 1 byte: %#x\n",
++ FLD_GET(val, 23, 8));
++ } else if (dt == DSI_DT_RX_SHORT_READ_2) {
++ DSSDBG("\tDCS short response, 2 byte: %#x\n",
++ FLD_GET(val, 23, 8));
++ } else if (dt == DSI_DT_RX_DCS_LONG_READ) {
++ DSSDBG("\tDCS long response, len %d\n",
++ FLD_GET(val, 23, 8));
++ dsi_vc_flush_long_data(channel);
++ } else {
++ DSSERR("\tunknown datatype 0x%02x\n", dt);
++ }
++ }
++ return 0;
++}
++
++static int dsi_vc_send_bta(int channel)
++{
++ if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO &&
++ (dsi.debug_write || dsi.debug_read))
++ DSSDBG("dsi_vc_send_bta %d\n", channel);
++
++ WARN_ON(!mutex_is_locked(&dsi.bus_lock));
++
++ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */
++ DSSERR("rx fifo not empty when sending BTA, dumping data:\n");
++ dsi_vc_flush_receive_data(channel);
++ }
++
++ REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */
++
++ return 0;
++}
++
++int dsi_vc_send_bta_sync(int channel)
++{
++ int r = 0;
++ u32 err;
++
++ INIT_COMPLETION(dsi.bta_completion);
++
++ dsi_vc_enable_bta_irq(channel);
++
++ r = dsi_vc_send_bta(channel);
++ if (r)
++ goto err;
++
++ if (wait_for_completion_timeout(&dsi.bta_completion,
++ msecs_to_jiffies(500)) == 0) {
++ DSSERR("Failed to receive BTA\n");
++ r = -EIO;
++ goto err;
++ }
++
++ err = dsi_get_errors();
++ if (err) {
++ DSSERR("Error while sending BTA: %x\n", err);
++ r = -EIO;
++ goto err;
++ }
++err:
++ dsi_vc_disable_bta_irq(channel);
++
++ return r;
++}
++EXPORT_SYMBOL(dsi_vc_send_bta_sync);
++
++static inline void dsi_vc_write_long_header(int channel, u8 data_type,
++ u16 len, u8 ecc)
++{
++ u32 val;
++ u8 data_id;
++
++ WARN_ON(!mutex_is_locked(&dsi.bus_lock));
++
++ /*data_id = data_type | channel << 6; */
++ data_id = data_type | dsi.vc[channel].dest_per << 6;
++
++ val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) |
++ FLD_VAL(ecc, 31, 24);
++
++ dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val);
++}
++
++static inline void dsi_vc_write_long_payload(int channel,
++ u8 b1, u8 b2, u8 b3, u8 b4)
++{
++ u32 val;
++
++ val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0;
++
++/* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n",
++ b1, b2, b3, b4, val); */
++
++ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val);
++}
++
++static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len,
++ u8 ecc)
++{
++ /*u32 val; */
++ int i;
++ u8 *p;
++ int r = 0;
++ u8 b1, b2, b3, b4;
++
++ if (dsi.debug_write)
++ DSSDBG("dsi_vc_send_long, %d bytes\n", len);
++
++ /* len + header */
++ if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) {
++ DSSERR("unable to send long packet: packet too long.\n");
++ return -EINVAL;
++ }
++
++ dsi_vc_config_l4(channel);
++
++ dsi_vc_write_long_header(channel, data_type, len, ecc);
++
++ /*dsi_vc_print_status(0); */
++
++ p = data;
++ for (i = 0; i < len >> 2; i++) {
++ if (dsi.debug_write)
++ DSSDBG("\tsending full packet %d\n", i);
++ /*dsi_vc_print_status(0); */
++
++ b1 = *p++;
++ b2 = *p++;
++ b3 = *p++;
++ b4 = *p++;
++
++ dsi_vc_write_long_payload(channel, b1, b2, b3, b4);
++ }
++
++ i = len % 4;
++ if (i) {
++ b1 = 0; b2 = 0; b3 = 0;
++
++ if (dsi.debug_write)
++ DSSDBG("\tsending remainder bytes %d\n", i);
++
++ switch (i) {
++ case 3:
++ b1 = *p++;
++ b2 = *p++;
++ b3 = *p++;
++ break;
++ case 2:
++ b1 = *p++;
++ b2 = *p++;
++ break;
++ case 1:
++ b1 = *p++;
++ break;
++ }
++
++ dsi_vc_write_long_payload(channel, b1, b2, b3, 0);
++ }
++
++ return r;
++}
++
++static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc)
++{
++ u32 r;
++ u8 data_id;
++
++ WARN_ON(!mutex_is_locked(&dsi.bus_lock));
++
++ if (dsi.debug_write)
++ DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n",
++ channel,
++ data_type, data & 0xff, (data >> 8) & 0xff);
++
++ dsi_vc_config_l4(channel);
++
++ if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) {
++ DSSERR("ERROR FIFO FULL, aborting transfer\n");
++ return -EINVAL;
++ }
++
++ data_id = data_type | channel << 6;
++
++ r = (data_id << 0) | (data << 8) | (ecc << 24);
++
++ dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r);
++
++ return 0;
++}
++
++int dsi_vc_send_null(int channel)
++{
++ u8 nullpkg[] = {0, 0, 0, 0};
++ return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0);
++}
++EXPORT_SYMBOL(dsi_vc_send_null);
++
++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len)
++{
++ int r;
++
++ BUG_ON(len == 0);
++
++ if (len == 1) {
++ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0,
++ data[0], 0);
++ } else if (len == 2) {
++ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1,
++ data[0] | (data[1] << 8), 0);
++ } else {
++ /* 0x39 = DCS Long Write */
++ r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE,
++ data, len, 0);
++ }
++
++ return r;
++}
++EXPORT_SYMBOL(dsi_vc_dcs_write_nosync);
++
++int dsi_vc_dcs_write(int channel, u8 *data, int len)
++{
++ int r;
++
++ r = dsi_vc_dcs_write_nosync(channel, data, len);
++ if (r)
++ return r;
++
++ r = dsi_vc_send_bta_sync(channel);
++
++ return r;
++}
++EXPORT_SYMBOL(dsi_vc_dcs_write);
++
++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen)
++{
++ u32 val;
++ u8 dt;
++ int r;
++
++ if (dsi.debug_read)
++ DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %u)\n", channel, dcs_cmd);
++
++ r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0);
++ if (r)
++ return r;
++
++ r = dsi_vc_send_bta_sync(channel);
++ if (r)
++ return r;
++
++ /* RX_FIFO_NOT_EMPTY */
++ if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) {
++ DSSERR("RX fifo empty when trying to read.\n");
++ return -EIO;
++ }
++
++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
++ if (dsi.debug_read)
++ DSSDBG("\theader: %08x\n", val);
++ dt = FLD_GET(val, 5, 0);
++ if (dt == DSI_DT_RX_ACK_WITH_ERR) {
++ u16 err = FLD_GET(val, 23, 8);
++ dsi_show_rx_ack_with_err(err);
++ return -EIO;
++
++ } else if (dt == DSI_DT_RX_SHORT_READ_1) {
++ u8 data = FLD_GET(val, 15, 8);
++ if (dsi.debug_read)
++ DSSDBG("\tDCS short response, 1 byte: %02x\n", data);
++
++ if (buflen < 1)
++ return -EIO;
++
++ buf[0] = data;
++
++ return 1;
++ } else if (dt == DSI_DT_RX_SHORT_READ_2) {
++ u16 data = FLD_GET(val, 23, 8);
++ if (dsi.debug_read)
++ DSSDBG("\tDCS short response, 2 byte: %04x\n", data);
++
++ if (buflen < 2)
++ return -EIO;
++
++ buf[0] = data & 0xff;
++ buf[1] = (data >> 8) & 0xff;
++
++ return 2;
++ } else if (dt == DSI_DT_RX_DCS_LONG_READ) {
++ int w;
++ int len = FLD_GET(val, 23, 8);
++ if (dsi.debug_read)
++ DSSDBG("\tDCS long response, len %d\n", len);
++
++ if (len > buflen)
++ return -EIO;
++
++ /* two byte checksum ends the packet, not included in len */
++ for (w = 0; w < len + 2;) {
++ int b;
++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
++ if (dsi.debug_read)
++ DSSDBG("\t\t%02x %02x %02x %02x\n",
++ (val >> 0) & 0xff,
++ (val >> 8) & 0xff,
++ (val >> 16) & 0xff,
++ (val >> 24) & 0xff);
++
++ for (b = 0; b < 4; ++b) {
++ if (w < len)
++ buf[w] = (val >> (b * 8)) & 0xff;
++ /* we discard the 2 byte checksum */
++ ++w;
++ }
++ }
++
++ return len;
++
++ } else {
++ DSSERR("\tunknown datatype 0x%02x\n", dt);
++ return -EIO;
++ }
++}
++EXPORT_SYMBOL(dsi_vc_dcs_read);
++
++
++int dsi_vc_set_max_rx_packet_size(int channel, u16 len)
++{
++ return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
++ len, 0);
++}
++EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size);
++
++
++static int dsi_set_lp_rx_timeout(int ns, int x4, int x16)
++{
++ u32 r;
++ unsigned long fck;
++ int ticks;
++
++ /* ticks in DSI_FCK */
++
++ fck = dsi_fclk_rate();
++ ticks = (fck / 1000 / 1000) * ns / 1000;
++
++ if (ticks > 0x1fff) {
++ DSSERR("LP_TX_TO too high\n");
++ return -EINVAL;
++ }
++
++ r = dsi_read_reg(DSI_TIMING2);
++ r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */
++ r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */
++ r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */
++ r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */
++ dsi_write_reg(DSI_TIMING2, r);
++
++ DSSDBG("LP_RX_TO %ld ns (%#x ticks)\n",
++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
++ (fck / 1000 / 1000),
++ ticks);
++
++ return 0;
++}
++
++static int dsi_set_ta_timeout(int ns, int x8, int x16)
++{
++ u32 r;
++ unsigned long fck;
++ int ticks;
++
++ /* ticks in DSI_FCK */
++
++ fck = dsi_fclk_rate();
++ ticks = (fck / 1000 / 1000) * ns / 1000;
++
++ if (ticks > 0x1fff) {
++ DSSERR("TA_TO too high\n");
++ return -EINVAL;
++ }
++
++ r = dsi_read_reg(DSI_TIMING1);
++ r = FLD_MOD(r, 1, 31, 31); /* TA_TO */
++ r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */
++ r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */
++ r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */
++ dsi_write_reg(DSI_TIMING1, r);
++
++ DSSDBG("TA_TO %ld ns (%#x ticks)\n",
++ (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) /
++ (fck / 1000 / 1000),
++ ticks);
++
++ return 0;
++}
++
++static int dsi_set_stop_state_counter(int ns, int x4, int x16)
++{
++ u32 r;
++ unsigned long fck;
++ int ticks;
++
++ /* ticks in DSI_FCK */
++
++ fck = dsi_fclk_rate();
++ ticks = (fck / 1000 / 1000) * ns / 1000;
++
++ if (ticks > 0x1fff) {
++ DSSERR("STOP_STATE_COUNTER_IO too high\n");
++ return -EINVAL;
++ }
++
++ r = dsi_read_reg(DSI_TIMING1);
++ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */
++ r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */
++ r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */
++ r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */
++ dsi_write_reg(DSI_TIMING1, r);
++
++ DSSDBG("STOP_STATE_COUNTER %ld ns (%#x ticks)\n",
++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
++ (fck / 1000 / 1000),
++ ticks);
++
++ return 0;
++}
++
++static int dsi_set_hs_tx_timeout(int ns, int x4, int x16)
++{
++ u32 r;
++ unsigned long fck;
++ int ticks;
++
++ /* ticks in TxByteClkHS */
++
++ fck = dsi.ddr_clk / 4;
++ ticks = (fck / 1000 / 1000) * ns / 1000;
++
++ if (ticks > 0x1fff) {
++ DSSERR("HS_TX_TO too high\n");
++ return -EINVAL;
++ }
++
++ r = dsi_read_reg(DSI_TIMING2);
++ r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */
++ r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */
++ r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */
++ r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */
++ dsi_write_reg(DSI_TIMING2, r);
++
++ DSSDBG("HS_TX_TO %ld ns (%#x ticks)\n",
++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
++ (fck / 1000 / 1000),
++ ticks);
++
++ return 0;
++}
++static int dsi_proto_config(struct omap_dss_device *dssdev)
++{
++ u32 r;
++ int buswidth = 0;
++ int div;
++
++ dsi_config_tx_fifo(DSI_FIFO_SIZE_128,
++ DSI_FIFO_SIZE_0,
++ DSI_FIFO_SIZE_0,
++ DSI_FIFO_SIZE_0);
++
++ dsi_config_rx_fifo(DSI_FIFO_SIZE_128,
++ DSI_FIFO_SIZE_0,
++ DSI_FIFO_SIZE_0,
++ DSI_FIFO_SIZE_0);
++
++ /* XXX what values for the timeouts? */
++ dsi_set_stop_state_counter(1000, 0, 0);
++
++ dsi_set_ta_timeout(50000, 1, 1);
++
++ /* 3000ns * 16 */
++ dsi_set_lp_rx_timeout(3000, 0, 1);
++
++ /* 10000ns * 4 */
++ dsi_set_hs_tx_timeout(10000, 1, 0);
++
++ switch (dssdev->ctrl.pixel_size) {
++ case 16:
++ buswidth = 0;
++ break;
++ case 18:
++ buswidth = 1;
++ break;
++ case 24:
++ buswidth = 2;
++ break;
++ default:
++ BUG();
++ }
++
++ r = dsi_read_reg(DSI_CTRL);
++ r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */
++ r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */
++ r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */
++
++ div = dispc_lclk_rate() / dispc_pclk_rate();
++ r = FLD_MOD(r, div == 2 ? 0 : 1, 4, 4); /* VP_CLK_RATIO */
++ r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */
++ r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */
++ r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */
++ r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */
++ r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */
++ r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */
++ r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */
++
++ dsi_write_reg(DSI_CTRL, r);
++
++ dsi_vc_initial_config(0);
++
++ /* set all vc targets to peripheral 0 */
++ dsi.vc[0].dest_per = 0;
++ dsi.vc[1].dest_per = 0;
++ dsi.vc[2].dest_per = 0;
++ dsi.vc[3].dest_per = 0;
++
++ return 0;
++}
++
++static void dsi_proto_timings(struct omap_dss_device *dssdev)
++{
++ unsigned tlpx, tclk_zero, tclk_prepare, tclk_trail;
++ unsigned tclk_pre, tclk_post;
++ unsigned ths_prepare, ths_prepare_ths_zero, ths_zero;
++ unsigned ths_trail, ths_exit;
++ unsigned ddr_clk_pre, ddr_clk_post;
++ unsigned enter_hs_mode_lat, exit_hs_mode_lat;
++ unsigned ths_eot;
++ u32 r;
++
++ r = dsi_read_reg(DSI_DSIPHY_CFG0);
++ ths_prepare = FLD_GET(r, 31, 24);
++ ths_prepare_ths_zero = FLD_GET(r, 23, 16);
++ ths_zero = ths_prepare_ths_zero - ths_prepare;
++ ths_trail = FLD_GET(r, 15, 8);
++ ths_exit = FLD_GET(r, 7, 0);
++
++ r = dsi_read_reg(DSI_DSIPHY_CFG1);
++ tlpx = FLD_GET(r, 22, 16) * 2;
++ tclk_trail = FLD_GET(r, 15, 8);
++ tclk_zero = FLD_GET(r, 7, 0);
++
++ r = dsi_read_reg(DSI_DSIPHY_CFG2);
++ tclk_prepare = FLD_GET(r, 7, 0);
++
++ /* min 8*UI */
++ tclk_pre = 20;
++ /* min 60ns + 52*UI */
++ tclk_post = ns2ddr(60) + 26;
++
++ /* ths_eot is 2 for 2 datalanes and 4 for 1 datalane */
++ if (dssdev->phy.dsi.data1_lane != 0 &&
++ dssdev->phy.dsi.data2_lane != 0)
++ ths_eot = 2;
++ else
++ ths_eot = 4;
++
++ ddr_clk_pre = DIV_ROUND_UP(tclk_pre + tlpx + tclk_zero + tclk_prepare,
++ 4);
++ ddr_clk_post = DIV_ROUND_UP(tclk_post + tclk_trail, 4) + ths_eot;
++
++ BUG_ON(ddr_clk_pre == 0 || ddr_clk_pre > 255);
++ BUG_ON(ddr_clk_post == 0 || ddr_clk_post > 255);
++
++ r = dsi_read_reg(DSI_CLK_TIMING);
++ r = FLD_MOD(r, ddr_clk_pre, 15, 8);
++ r = FLD_MOD(r, ddr_clk_post, 7, 0);
++ dsi_write_reg(DSI_CLK_TIMING, r);
++
++ DSSDBG("ddr_clk_pre %u, ddr_clk_post %u\n",
++ ddr_clk_pre,
++ ddr_clk_post);
++
++ enter_hs_mode_lat = 1 + DIV_ROUND_UP(tlpx, 4) +
++ DIV_ROUND_UP(ths_prepare, 4) +
++ DIV_ROUND_UP(ths_zero + 3, 4);
++
++ exit_hs_mode_lat = DIV_ROUND_UP(ths_trail + ths_exit, 4) + 1 + ths_eot;
++
++ r = FLD_VAL(enter_hs_mode_lat, 31, 16) |
++ FLD_VAL(exit_hs_mode_lat, 15, 0);
++ dsi_write_reg(DSI_VM_TIMING7, r);
++
++ DSSDBG("enter_hs_mode_lat %u, exit_hs_mode_lat %u\n",
++ enter_hs_mode_lat, exit_hs_mode_lat);
++}
++
++
++#define DSI_DECL_VARS \
++ int __dsi_cb = 0; u32 __dsi_cv = 0;
++
++#define DSI_FLUSH(ch) \
++ if (__dsi_cb > 0) { \
++ /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \
++ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \
++ __dsi_cb = __dsi_cv = 0; \
++ }
++
++#define DSI_PUSH(ch, data) \
++ do { \
++ __dsi_cv |= (data) << (__dsi_cb * 8); \
++ /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \
++ if (++__dsi_cb > 3) \
++ DSI_FLUSH(ch); \
++ } while (0)
++
++static int dsi_update_screen_l4(struct omap_dss_device *dssdev,
++ int x, int y, int w, int h)
++{
++ /* Note: supports only 24bit colors in 32bit container */
++ int first = 1;
++ int fifo_stalls = 0;
++ int max_dsi_packet_size;
++ int max_data_per_packet;
++ int max_pixels_per_packet;
++ int pixels_left;
++ int bytespp = dssdev->ctrl.pixel_size / 8;
++ int scr_width;
++ u32 __iomem *data;
++ int start_offset;
++ int horiz_inc;
++ int current_x;
++ struct omap_overlay *ovl;
++
++ debug_irq = 0;
++
++ DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n",
++ x, y, w, h);
++
++ ovl = dssdev->manager->overlays[0];
++
++ if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U)
++ return -EINVAL;
++
++ if (dssdev->ctrl.pixel_size != 24)
++ return -EINVAL;
++
++ scr_width = ovl->info.screen_width;
++ data = ovl->info.vaddr;
++
++ start_offset = scr_width * y + x;
++ horiz_inc = scr_width - w;
++ current_x = x;
++
++ /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes
++ * in fifo */
++
++ /* When using CPU, max long packet size is TX buffer size */
++ max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4;
++
++ /* we seem to get better perf if we divide the tx fifo to half,
++ and while the other half is being sent, we fill the other half
++ max_dsi_packet_size /= 2; */
++
++ max_data_per_packet = max_dsi_packet_size - 4 - 1;
++
++ max_pixels_per_packet = max_data_per_packet / bytespp;
++
++ DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet);
++
++ pixels_left = w * h;
++
++ DSSDBG("total pixels %d\n", pixels_left);
++
++ data += start_offset;
++
++ while (pixels_left > 0) {
++ /* 0x2c = write_memory_start */
++ /* 0x3c = write_memory_continue */
++ u8 dcs_cmd = first ? 0x2c : 0x3c;
++ int pixels;
++ DSI_DECL_VARS;
++ first = 0;
++
++#if 1
++ /* using fifo not empty */
++ /* TX_FIFO_NOT_EMPTY */
++ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) {
++ udelay(1);
++ fifo_stalls++;
++ if (fifo_stalls > 0xfffff) {
++ DSSERR("fifo stalls overflow, pixels left %d\n",
++ pixels_left);
++ dsi_if_enable(0);
++ return -EIO;
++ }
++ }
++#elif 1
++ /* using fifo emptiness */
++ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 <
++ max_dsi_packet_size) {
++ fifo_stalls++;
++ if (fifo_stalls > 0xfffff) {
++ DSSERR("fifo stalls overflow, pixels left %d\n",
++ pixels_left);
++ dsi_if_enable(0);
++ return -EIO;
++ }
++ }
++#else
++ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) {
++ fifo_stalls++;
++ if (fifo_stalls > 0xfffff) {
++ DSSERR("fifo stalls overflow, pixels left %d\n",
++ pixels_left);
++ dsi_if_enable(0);
++ return -EIO;
++ }
++ }
++#endif
++ pixels = min(max_pixels_per_packet, pixels_left);
++
++ pixels_left -= pixels;
++
++ dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE,
++ 1 + pixels * bytespp, 0);
++
++ DSI_PUSH(0, dcs_cmd);
++
++ while (pixels-- > 0) {
++ u32 pix = __raw_readl(data++);
++
++ DSI_PUSH(0, (pix >> 16) & 0xff);
++ DSI_PUSH(0, (pix >> 8) & 0xff);
++ DSI_PUSH(0, (pix >> 0) & 0xff);
++
++ current_x++;
++ if (current_x == x+w) {
++ current_x = x;
++ data += horiz_inc;
++ }
++ }
++
++ DSI_FLUSH(0);
++ }
++
++ return 0;
++}
++
++static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
++ u16 x, u16 y, u16 w, u16 h)
++{
++ int bytespp = dssdev->ctrl.pixel_size / 8;
++ int len;
++ int total_len;
++ int packet_payload;
++ int packet_len;
++ u32 l;
++ bool use_te_trigger;
++ const int channel = 0;
++
++ use_te_trigger = dsi.te_enabled && !dsi.use_ext_te;
++
++ if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
++ DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
++ x, y, w, h);
++
++ len = w * h * bytespp;
++
++ /* XXX: one packet could be longer, I think? Line buffer is
++ * 1024 x 24bits, but we have to put DCS cmd there also.
++ * 1023 * 3 should work, but causes strange color effects. */
++ packet_payload = min(w, (u16)1020) * bytespp;
++
++ packet_len = packet_payload + 1; /* 1 byte for DCS cmd */
++ total_len = (len / packet_payload) * packet_len;
++
++ if (len % packet_payload)
++ total_len += (len % packet_payload) + 1;
++
++ if (0)
++ dsi_vc_print_status(1);
++
++ l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */
++ dsi_write_reg(DSI_VC_TE(channel), l);
++
++ dsi_vc_write_long_header(channel, DSI_DT_DCS_LONG_WRITE, packet_len, 0);
++
++ if (use_te_trigger)
++ l = FLD_MOD(l, 1, 30, 30); /* TE_EN */
++ else
++ l = FLD_MOD(l, 1, 31, 31); /* TE_START */
++ dsi_write_reg(DSI_VC_TE(channel), l);
++
++ /* We put SIDLEMODE to no-idle for the duration of the transfer,
++ * because DSS interrupts are not capable of waking up the CPU and the
++ * framedone interrupt could be delayed for quite a long time. I think
++ * the same goes for any DSS interrupts, but for some reason I have not
++ * seen the problem anywhere else than here.
++ */
++ dispc_disable_sidle();
++
++ dss_start_update(dssdev);
++
++ if (use_te_trigger) {
++ /* disable LP_RX_TO, so that we can receive TE. Time to wait
++ * for TE is longer than the timer allows */
++ REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */
++
++ dsi_vc_send_bta(channel);
++ }
++}
++
++static void dsi_framedone_irq_callback(void *data, u32 mask)
++{
++ /* Note: We get FRAMEDONE when DISPC has finished sending pixels and
++ * turns itself off. However, DSI still has the pixels in its buffers,
++ * and is sending the data.
++ */
++
++ /* SIDLEMODE back to smart-idle */
++ dispc_enable_sidle();
++
++ dsi.framedone_received = true;
++ wake_up(&dsi.waitqueue);
++}
++
++static void dsi_set_update_region(struct omap_dss_device *dssdev,
++ u16 x, u16 y, u16 w, u16 h)
++{
++ spin_lock(&dsi.update_lock);
++ if (dsi.update_region.dirty) {
++ dsi.update_region.x = min(x, dsi.update_region.x);
++ dsi.update_region.y = min(y, dsi.update_region.y);
++ dsi.update_region.w = max(w, dsi.update_region.w);
++ dsi.update_region.h = max(h, dsi.update_region.h);
++ } else {
++ dsi.update_region.x = x;
++ dsi.update_region.y = y;
++ dsi.update_region.w = w;
++ dsi.update_region.h = h;
++ }
++
++ dsi.update_region.device = dssdev;
++ dsi.update_region.dirty = true;
++
++ spin_unlock(&dsi.update_lock);
++
++}
++
++static void dsi_start_auto_update(struct omap_dss_device *dssdev)
++{
++ u16 w, h;
++ int i;
++
++ DSSDBG("starting auto update\n");
++
++ /* In automatic mode the overlay settings are applied like on DPI/SDI.
++ * Mark the overlays dirty, so that we get the overlays configured, as
++ * manual mode has left them in bad shape after config partia planes */
++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++ struct omap_overlay *ovl;
++ ovl = omap_dss_get_overlay(i);
++ if (ovl->manager == dssdev->manager)
++ ovl->info_dirty = true;
++ }
++ dssdev->manager->apply(dssdev->manager);
++
++ dssdev->get_resolution(dssdev, &w, &h);
++
++ dsi_set_update_region(dssdev, 0, 0, w, h);
++
++ dsi_perf_mark_start_auto();
++
++ wake_up(&dsi.waitqueue);
++}
++
++static int dsi_set_te(struct omap_dss_device *dssdev, bool enable)
++{
++ int r;
++ r = dssdev->driver->enable_te(dssdev, enable);
++ /* XXX for some reason, DSI TE breaks if we don't wait here.
++ * Panel bug? Needs more studying */
++ msleep(100);
++ return r;
++}
++
++static void dsi_handle_framedone(void)
++{
++ int r;
++ const int channel = 0;
++ bool use_te_trigger;
++
++ use_te_trigger = dsi.te_enabled && !dsi.use_ext_te;
++
++ if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
++ DSSDBG("FRAMEDONE\n");
++
++ if (use_te_trigger) {
++ /* enable LP_RX_TO again after the TE */
++ REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
++ }
++
++ /* Send BTA after the frame. We need this for the TE to work, as TE
++ * trigger is only sent for BTAs without preceding packet. Thus we need
++ * to BTA after the pixel packets so that next BTA will cause TE
++ * trigger.
++ *
++ * This is not needed when TE is not in use, but we do it anyway to
++ * make sure that the transfer has been completed. It would be more
++ * optimal, but more complex, to wait only just before starting next
++ * transfer. */
++ r = dsi_vc_send_bta_sync(channel);
++ if (r)
++ DSSERR("BTA after framedone failed\n");
++
++#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
++ dispc_fake_vsync_irq();
++#endif
++}
++
++static int dsi_update_thread(void *data)
++{
++ unsigned long timeout;
++ struct omap_dss_device *device;
++ u16 x, y, w, h;
++
++ while (1) {
++ bool sched;
++
++ wait_event_interruptible(dsi.waitqueue,
++ dsi.update_mode == OMAP_DSS_UPDATE_AUTO ||
++ (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL &&
++ dsi.update_region.dirty == true) ||
++ kthread_should_stop());
++
++ if (kthread_should_stop())
++ break;
++
++ dsi_bus_lock();
++
++ if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED ||
++ kthread_should_stop()) {
++ dsi_bus_unlock();
++ break;
++ }
++
++ dsi_perf_mark_setup();
++
++ if (dsi.update_region.dirty) {
++ spin_lock(&dsi.update_lock);
++ dsi.active_update_region = dsi.update_region;
++ dsi.update_region.dirty = false;
++ spin_unlock(&dsi.update_lock);
++ }
++
++ device = dsi.active_update_region.device;
++ x = dsi.active_update_region.x;
++ y = dsi.active_update_region.y;
++ w = dsi.active_update_region.w;
++ h = dsi.active_update_region.h;
++
++ if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
++
++ if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) {
++ dss_setup_partial_planes(device,
++ &x, &y, &w, &h);
++#if 1
++ /* XXX there seems to be a bug in this driver
++ * or OMAP hardware. Some updates with certain
++ * widths and x coordinates fail. These widths
++ * are always odd, so "fix" it here for now */
++ if (w & 1) {
++ u16 dw, dh;
++ device->get_resolution(device,
++ &dw, &dh);
++ if (x + w == dw)
++ x &= ~1;
++ ++w;
++
++ dss_setup_partial_planes(device,
++ &x, &y, &w, &h);
++ }
++#endif
++ }
++
++ dispc_set_lcd_size(w, h);
++ }
++
++ if (dsi.active_update_region.dirty) {
++ dsi.active_update_region.dirty = false;
++ /* XXX TODO we don't need to send the coords, if they
++ * are the same that are already programmed to the
++ * panel. That should speed up manual update a bit */
++ device->driver->setup_update(device, x, y, w, h);
++ }
++
++ dsi_perf_mark_start();
++
++ if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
++ dsi_vc_config_vp(0);
++
++ if (dsi.te_enabled && dsi.use_ext_te)
++ device->driver->wait_for_te(device);
++
++ dsi.framedone_received = false;
++
++ dsi_update_screen_dispc(device, x, y, w, h);
++
++ /* wait for framedone */
++ timeout = msecs_to_jiffies(1000);
++ timeout = wait_event_timeout(dsi.waitqueue,
++ dsi.framedone_received == true,
++ timeout);
++
++ if (timeout == 0) {
++ DSSERR("framedone timeout\n");
++ DSSERR("failed update %d,%d %dx%d\n",
++ x, y, w, h);
++
++ dispc_enable_sidle();
++ dispc_enable_lcd_out(0);
++ } else {
++ dsi_handle_framedone();
++ dsi_perf_show("DISPC");
++ }
++ } else {
++ dsi_update_screen_l4(device, x, y, w, h);
++ dsi_perf_show("L4");
++ }
++
++ sched = atomic_read(&dsi.bus_lock.count) < 0;
++
++ complete_all(&dsi.update_completion);
++
++ dsi_bus_unlock();
++
++ /* XXX We need to give others chance to get the bus lock. Is
++ * there a better way for this? */
++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO && sched)
++ schedule_timeout_interruptible(1);
++ }
++
++ DSSDBG("update thread exiting\n");
++
++ return 0;
++}
++
++
++
++/* Display funcs */
++
++static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
++{
++ int r;
++
++ r = omap_dispc_register_isr(dsi_framedone_irq_callback, NULL,
++ DISPC_IRQ_FRAMEDONE);
++ if (r) {
++ DSSERR("can't get FRAMEDONE irq\n");
++ return r;
++ }
++
++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
++
++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI);
++ dispc_enable_fifohandcheck(1);
++
++ dispc_set_tft_data_lines(dssdev->ctrl.pixel_size);
++
++ {
++ struct omap_video_timings timings = {
++ .hsw = 1,
++ .hfp = 1,
++ .hbp = 1,
++ .vsw = 1,
++ .vfp = 0,
++ .vbp = 0,
++ };
++
++ dispc_set_lcd_timings(&timings);
++ }
++
++ return 0;
++}
++
++static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev)
++{
++ omap_dispc_unregister_isr(dsi_framedone_irq_callback, NULL,
++ DISPC_IRQ_FRAMEDONE);
++}
++
++static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
++{
++ struct dsi_clock_info cinfo;
++ int r;
++
++ _dsi_print_reset_status();
++
++ r = dsi_pll_init(1, 0);
++ if (r)
++ goto err0;
++
++ r = dsi_pll_calc_ddrfreq(dssdev->phy.dsi.ddr_clk_hz, &cinfo);
++ if (r)
++ goto err1;
++
++ r = dsi_pll_program(&cinfo);
++ if (r)
++ goto err1;
++
++ DSSDBG("PLL OK\n");
++
++ r = dsi_complexio_init(dssdev);
++ if (r)
++ goto err1;
++
++ _dsi_print_reset_status();
++
++ dsi_proto_timings(dssdev);
++ dsi_set_lp_clk_divisor(dssdev);
++
++ if (1)
++ _dsi_print_reset_status();
++
++ r = dsi_proto_config(dssdev);
++ if (r)
++ goto err2;
++
++ /* enable interface */
++ dsi_vc_enable(0, 1);
++ dsi_if_enable(1);
++ dsi_force_tx_stop_mode_io();
++
++ if (dssdev->driver->enable) {
++ r = dssdev->driver->enable(dssdev);
++ if (r)
++ goto err3;
++ }
++
++ /* enable high-speed after initial config */
++ dsi_vc_enable_hs(0, 1);
++
++ return 0;
++err3:
++ dsi_if_enable(0);
++err2:
++ dsi_complexio_uninit();
++err1:
++ dsi_pll_uninit();
++err0:
++ return r;
++}
++
++static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev)
++{
++ if (dssdev->driver->disable)
++ dssdev->driver->disable(dssdev);
++
++ dsi_complexio_uninit();
++ dsi_pll_uninit();
++}
++
++static int dsi_core_init(void)
++{
++ /* Autoidle */
++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0);
++
++ /* ENWAKEUP */
++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2);
++
++ /* SIDLEMODE smart-idle */
++ REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3);
++
++ _dsi_initialize_irq();
++
++ return 0;
++}
++
++static int dsi_display_enable(struct omap_dss_device *dssdev)
++{
++ int r = 0;
++
++ DSSDBG("dsi_display_enable\n");
++
++ mutex_lock(&dsi.lock);
++ dsi_bus_lock();
++
++ r = omap_dss_start_device(dssdev);
++ if (r) {
++ DSSERR("failed to start device\n");
++ goto err0;
++ }
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
++ DSSERR("dssdev already enabled\n");
++ r = -EINVAL;
++ goto err1;
++ }
++
++ enable_clocks(1);
++ dsi_enable_pll_clock(1);
++
++ r = _dsi_reset();
++ if (r)
++ goto err2;
++
++ dsi_core_init();
++
++ r = dsi_display_init_dispc(dssdev);
++ if (r)
++ goto err2;
++
++ r = dsi_display_init_dsi(dssdev);
++ if (r)
++ goto err3;
++
++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++ dsi.use_ext_te = dssdev->phy.dsi.ext_te;
++ r = dsi_set_te(dssdev, dsi.te_enabled);
++ if (r)
++ goto err3;
++
++ dsi.update_mode = dsi.user_update_mode;
++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO)
++ dsi_start_auto_update(dssdev);
++
++ dsi_bus_unlock();
++ mutex_unlock(&dsi.lock);
++
++ return 0;
++
++err3:
++ dsi_display_uninit_dispc(dssdev);
++err2:
++ enable_clocks(0);
++ dsi_enable_pll_clock(0);
++err1:
++ omap_dss_stop_device(dssdev);
++err0:
++ dsi_bus_unlock();
++ mutex_unlock(&dsi.lock);
++ DSSDBG("dsi_display_enable FAILED\n");
++ return r;
++}
++
++static void dsi_display_disable(struct omap_dss_device *dssdev)
++{
++ DSSDBG("dsi_display_disable\n");
++
++ mutex_lock(&dsi.lock);
++ dsi_bus_lock();
++
++ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED ||
++ dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
++ goto end;
++
++ dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
++ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
++
++ dsi_display_uninit_dispc(dssdev);
++
++ dsi_display_uninit_dsi(dssdev);
++
++ enable_clocks(0);
++ dsi_enable_pll_clock(0);
++
++ omap_dss_stop_device(dssdev);
++end:
++ dsi_bus_unlock();
++ mutex_unlock(&dsi.lock);
++}
++
++static int dsi_display_suspend(struct omap_dss_device *dssdev)
++{
++ DSSDBG("dsi_display_suspend\n");
++
++ mutex_lock(&dsi.lock);
++ dsi_bus_lock();
++
++ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED ||
++ dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
++ goto end;
++
++ dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
++ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
++
++ dsi_display_uninit_dispc(dssdev);
++
++ dsi_display_uninit_dsi(dssdev);
++
++ enable_clocks(0);
++ dsi_enable_pll_clock(0);
++end:
++ dsi_bus_unlock();
++ mutex_unlock(&dsi.lock);
++
++ return 0;
++}
++
++static int dsi_display_resume(struct omap_dss_device *dssdev)
++{
++ int r;
++
++ DSSDBG("dsi_display_resume\n");
++
++ mutex_lock(&dsi.lock);
++ dsi_bus_lock();
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
++ DSSERR("dssdev not suspended\n");
++ r = -EINVAL;
++ goto err0;
++ }
++
++ enable_clocks(1);
++ dsi_enable_pll_clock(1);
++
++ r = _dsi_reset();
++ if (r)
++ goto err1;
++
++ dsi_core_init();
++
++ r = dsi_display_init_dispc(dssdev);
++ if (r)
++ goto err1;
++
++ r = dsi_display_init_dsi(dssdev);
++ if (r)
++ goto err2;
++
++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++ r = dsi_set_te(dssdev, dsi.te_enabled);
++ if (r)
++ goto err2;
++
++ dsi.update_mode = dsi.user_update_mode;
++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO)
++ dsi_start_auto_update(dssdev);
++
++ dsi_bus_unlock();
++ mutex_unlock(&dsi.lock);
++
++ return 0;
++
++err2:
++ dsi_display_uninit_dispc(dssdev);
++err1:
++ enable_clocks(0);
++ dsi_enable_pll_clock(0);
++err0:
++ dsi_bus_unlock();
++ mutex_unlock(&dsi.lock);
++ DSSDBG("dsi_display_resume FAILED\n");
++ return r;
++}
++
++static int dsi_display_update(struct omap_dss_device *dssdev,
++ u16 x, u16 y, u16 w, u16 h)
++{
++ int r = 0;
++ u16 dw, dh;
++
++ DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h);
++
++ mutex_lock(&dsi.lock);
++
++ if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL)
++ goto end;
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
++ goto end;
++
++ dssdev->get_resolution(dssdev, &dw, &dh);
++
++ if (x > dw || y > dh)
++ goto end;
++
++ if (x + w > dw)
++ w = dw - x;
++
++ if (y + h > dh)
++ h = dh - y;
++
++ if (w == 0 || h == 0)
++ goto end;
++
++ dsi_set_update_region(dssdev, x, y, w, h);
++
++ wake_up(&dsi.waitqueue);
++
++end:
++ mutex_unlock(&dsi.lock);
++
++ return r;
++}
++
++static int dsi_display_sync(struct omap_dss_device *dssdev)
++{
++ bool wait;
++
++ DSSDBG("dsi_display_sync()\n");
++
++ mutex_lock(&dsi.lock);
++ dsi_bus_lock();
++
++ if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL &&
++ dsi.update_region.dirty) {
++ INIT_COMPLETION(dsi.update_completion);
++ wait = true;
++ } else {
++ wait = false;
++ }
++
++ dsi_bus_unlock();
++ mutex_unlock(&dsi.lock);
++
++ if (wait)
++ wait_for_completion_interruptible(&dsi.update_completion);
++
++ DSSDBG("dsi_display_sync() done\n");
++ return 0;
++}
++
++static int dsi_display_set_update_mode(struct omap_dss_device *dssdev,
++ enum omap_dss_update_mode mode)
++{
++ DSSDBGF("%d", mode);
++
++ mutex_lock(&dsi.lock);
++ dsi_bus_lock();
++
++ if (dsi.update_mode != mode) {
++ dsi.user_update_mode = mode;
++ dsi.update_mode = mode;
++
++ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE &&
++ mode == OMAP_DSS_UPDATE_AUTO)
++ dsi_start_auto_update(dssdev);
++ }
++
++ dsi_bus_unlock();
++ mutex_unlock(&dsi.lock);
++
++ return 0;
++}
++
++static enum omap_dss_update_mode dsi_display_get_update_mode(
++ struct omap_dss_device *dssdev)
++{
++ return dsi.update_mode;
++}
++
++
++static int dsi_display_enable_te(struct omap_dss_device *dssdev, bool enable)
++{
++ int r = 0;
++
++ DSSDBGF("%d", enable);
++
++ if (!dssdev->driver->enable_te)
++ return -ENOENT;
++
++ dsi_bus_lock();
++
++ dsi.te_enabled = enable;
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
++ goto end;
++
++ r = dsi_set_te(dssdev, enable);
++end:
++ dsi_bus_unlock();
++
++ return r;
++}
++
++static int dsi_display_get_te(struct omap_dss_device *dssdev)
++{
++ return dsi.te_enabled;
++}
++
++static int dsi_display_set_rotate(struct omap_dss_device *dssdev, u8 rotate)
++{
++
++ DSSDBGF("%d", rotate);
++
++ if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
++ return -EINVAL;
++
++ dsi_bus_lock();
++ dssdev->driver->set_rotate(dssdev, rotate);
++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) {
++ u16 w, h;
++ /* the display dimensions may have changed, so set a new
++ * update region */
++ dssdev->get_resolution(dssdev, &w, &h);
++ dsi_set_update_region(dssdev, 0, 0, w, h);
++ }
++ dsi_bus_unlock();
++
++ return 0;
++}
++
++static u8 dsi_display_get_rotate(struct omap_dss_device *dssdev)
++{
++ if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
++ return 0;
++
++ return dssdev->driver->get_rotate(dssdev);
++}
++
++static int dsi_display_set_mirror(struct omap_dss_device *dssdev, bool mirror)
++{
++ DSSDBGF("%d", mirror);
++
++ if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
++ return -EINVAL;
++
++ dsi_bus_lock();
++ dssdev->driver->set_mirror(dssdev, mirror);
++ dsi_bus_unlock();
++
++ return 0;
++}
++
++static bool dsi_display_get_mirror(struct omap_dss_device *dssdev)
++{
++ if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
++ return 0;
++
++ return dssdev->driver->get_mirror(dssdev);
++}
++
++static int dsi_display_run_test(struct omap_dss_device *dssdev, int test_num)
++{
++ int r;
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
++ return -EIO;
++
++ DSSDBGF("%d", test_num);
++
++ dsi_bus_lock();
++
++ /* run test first in low speed mode */
++ dsi_vc_enable_hs(0, 0);
++
++ if (dssdev->driver->run_test) {
++ r = dssdev->driver->run_test(dssdev, test_num);
++ if (r)
++ goto end;
++ }
++
++ /* then in high speed */
++ dsi_vc_enable_hs(0, 1);
++
++ if (dssdev->driver->run_test) {
++ r = dssdev->driver->run_test(dssdev, test_num);
++ if (r)
++ goto end;
++ }
++
++end:
++ dsi_vc_enable_hs(0, 1);
++
++ dsi_bus_unlock();
++
++ return r;
++}
++
++static int dsi_display_memory_read(struct omap_dss_device *dssdev,
++ void *buf, size_t size,
++ u16 x, u16 y, u16 w, u16 h)
++{
++ int r;
++
++ DSSDBGF("");
++
++ if (!dssdev->driver->memory_read)
++ return -EINVAL;
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
++ return -EIO;
++
++ dsi_bus_lock();
++
++ r = dssdev->driver->memory_read(dssdev, buf, size,
++ x, y, w, h);
++
++ dsi_bus_unlock();
++
++ return r;
++}
++
++void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
++ u32 fifo_size, enum omap_burst_size *burst_size,
++ u32 *fifo_low, u32 *fifo_high)
++{
++ unsigned burst_size_bytes;
++
++ *burst_size = OMAP_DSS_BURST_16x32;
++ burst_size_bytes = 16 * 32 / 8;
++
++ *fifo_high = fifo_size - burst_size_bytes;
++ *fifo_low = 0;
++}
++
++int dsi_init_display(struct omap_dss_device *dssdev)
++{
++ DSSDBG("DSI init\n");
++
++ dssdev->enable = dsi_display_enable;
++ dssdev->disable = dsi_display_disable;
++ dssdev->suspend = dsi_display_suspend;
++ dssdev->resume = dsi_display_resume;
++ dssdev->update = dsi_display_update;
++ dssdev->sync = dsi_display_sync;
++ dssdev->set_update_mode = dsi_display_set_update_mode;
++ dssdev->get_update_mode = dsi_display_get_update_mode;
++ dssdev->enable_te = dsi_display_enable_te;
++ dssdev->get_te = dsi_display_get_te;
++
++ dssdev->get_rotate = dsi_display_get_rotate;
++ dssdev->set_rotate = dsi_display_set_rotate;
++
++ dssdev->get_mirror = dsi_display_get_mirror;
++ dssdev->set_mirror = dsi_display_set_mirror;
++
++ dssdev->run_test = dsi_display_run_test;
++ dssdev->memory_read = dsi_display_memory_read;
++
++ dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
++
++ dsi.vc[0].dssdev = dssdev;
++ dsi.vc[1].dssdev = dssdev;
++
++ return 0;
++}
++
++int dsi_init(struct platform_device *pdev)
++{
++ u32 rev;
++ struct sched_param param = {
++ .sched_priority = MAX_USER_RT_PRIO-1
++ };
++
++ spin_lock_init(&dsi.errors_lock);
++ dsi.errors = 0;
++
++ /* XXX fail properly */
++
++ init_completion(&dsi.bta_completion);
++ init_completion(&dsi.update_completion);
++
++ dsi.thread = kthread_create(dsi_update_thread, NULL, "dsi");
++ if (IS_ERR(dsi.thread)) {
++ DSSERR("cannot create kthread\n");
++ return PTR_ERR(dsi.thread);
++ }
++ sched_setscheduler(dsi.thread, SCHED_FIFO, ¶m);
++
++ init_waitqueue_head(&dsi.waitqueue);
++ spin_lock_init(&dsi.update_lock);
++
++ mutex_init(&dsi.lock);
++ mutex_init(&dsi.bus_lock);
++
++ dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
++ dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED;
++
++ dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS);
++ if (!dsi.base) {
++ DSSERR("can't ioremap DSI\n");
++ return -ENOMEM;
++ }
++
++ dsi.vdds_dsi_reg = regulator_get(&pdev->dev, "vdds_dsi");
++ if (IS_ERR(dsi.vdds_dsi_reg)) {
++ iounmap(dsi.base);
++ DSSERR("can't get VDDS_DSI regulator\n");
++ return PTR_ERR(dsi.vdds_dsi_reg);
++ }
++
++ enable_clocks(1);
++
++ rev = dsi_read_reg(DSI_REVISION);
++ printk(KERN_INFO "OMAP DSI rev %d.%d\n",
++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
++
++ enable_clocks(0);
++
++ wake_up_process(dsi.thread);
++
++ return 0;
++}
++
++void dsi_exit(void)
++{
++ kthread_stop(dsi.thread);
++
++ regulator_put(dsi.vdds_dsi_reg);
++
++ iounmap(dsi.base);
++
++ DSSDBG("omap_dsi_exit\n");
++}
++
+diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
+new file mode 100644
+index 0000000..aab9758
+--- /dev/null
++++ b/drivers/video/omap2/dss/dss.c
+@@ -0,0 +1,347 @@
++/*
++ * linux/drivers/video/omap2/dss/dss.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "DSS"
++
++#include <linux/kernel.h>
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/seq_file.h>
++
++#include <mach/display.h>
++#include "dss.h"
++
++#define DSS_BASE 0x48050000
++
++#define DSS_SZ_REGS SZ_512
++
++struct dss_reg {
++ u16 idx;
++};
++
++#define DSS_REG(idx) ((const struct dss_reg) { idx })
++
++#define DSS_REVISION DSS_REG(0x0000)
++#define DSS_SYSCONFIG DSS_REG(0x0010)
++#define DSS_SYSSTATUS DSS_REG(0x0014)
++#define DSS_IRQSTATUS DSS_REG(0x0018)
++#define DSS_CONTROL DSS_REG(0x0040)
++#define DSS_SDI_CONTROL DSS_REG(0x0044)
++#define DSS_PLL_CONTROL DSS_REG(0x0048)
++#define DSS_SDI_STATUS DSS_REG(0x005C)
++
++#define REG_GET(idx, start, end) \
++ FLD_GET(dss_read_reg(idx), start, end)
++
++#define REG_FLD_MOD(idx, val, start, end) \
++ dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end))
++
++static struct {
++ void __iomem *base;
++
++ u32 ctx[DSS_SZ_REGS / sizeof(u32)];
++} dss;
++
++static int _omap_dss_wait_reset(void);
++
++static inline void dss_write_reg(const struct dss_reg idx, u32 val)
++{
++ __raw_writel(val, dss.base + idx.idx);
++}
++
++static inline u32 dss_read_reg(const struct dss_reg idx)
++{
++ return __raw_readl(dss.base + idx.idx);
++}
++
++#define SR(reg) \
++ dss.ctx[(DSS_##reg).idx / sizeof(u32)] = dss_read_reg(DSS_##reg)
++#define RR(reg) \
++ dss_write_reg(DSS_##reg, dss.ctx[(DSS_##reg).idx / sizeof(u32)])
++
++void dss_save_context(void)
++{
++ if (cpu_is_omap24xx())
++ return;
++
++ SR(SYSCONFIG);
++ SR(CONTROL);
++
++#ifdef CONFIG_OMAP2_DSS_SDI
++ SR(SDI_CONTROL);
++ SR(PLL_CONTROL);
++#endif
++}
++
++void dss_restore_context(void)
++{
++ if (_omap_dss_wait_reset())
++ DSSERR("DSS not coming out of reset after sleep\n");
++
++ RR(SYSCONFIG);
++ RR(CONTROL);
++
++#ifdef CONFIG_OMAP2_DSS_SDI
++ RR(SDI_CONTROL);
++ RR(PLL_CONTROL);
++#endif
++}
++
++#undef SR
++#undef RR
++
++void dss_sdi_init(u8 datapairs)
++{
++ u32 l;
++
++ BUG_ON(datapairs > 3 || datapairs < 1);
++
++ l = dss_read_reg(DSS_SDI_CONTROL);
++ l = FLD_MOD(l, 0xf, 19, 15); /* SDI_PDIV */
++ l = FLD_MOD(l, datapairs-1, 3, 2); /* SDI_PRSEL */
++ l = FLD_MOD(l, 2, 1, 0); /* SDI_BWSEL */
++ dss_write_reg(DSS_SDI_CONTROL, l);
++
++ l = dss_read_reg(DSS_PLL_CONTROL);
++ l = FLD_MOD(l, 0x7, 25, 22); /* SDI_PLL_FREQSEL */
++ l = FLD_MOD(l, 0xb, 16, 11); /* SDI_PLL_REGN */
++ l = FLD_MOD(l, 0xb4, 10, 1); /* SDI_PLL_REGM */
++ dss_write_reg(DSS_PLL_CONTROL, l);
++}
++
++void dss_sdi_enable(void)
++{
++ dispc_pck_free_enable(1);
++
++ /* Reset SDI PLL */
++ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */
++ udelay(1); /* wait 2x PCLK */
++
++ /* Lock SDI PLL */
++ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 28, 28); /* SDI_PLL_GOBIT */
++
++ /* Waiting for PLL lock request to complete */
++ while (dss_read_reg(DSS_SDI_STATUS) & (1 << 6))
++ ;
++
++ /* Clearing PLL_GO bit */
++ REG_FLD_MOD(DSS_PLL_CONTROL, 0, 28, 28);
++
++ /* Waiting for PLL to lock */
++ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5)))
++ ;
++
++ dispc_lcd_enable_signal(1);
++
++ /* Waiting for SDI reset to complete */
++ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 2)))
++ ;
++}
++
++void dss_sdi_disable(void)
++{
++ dispc_lcd_enable_signal(0);
++
++ dispc_pck_free_enable(0);
++
++ /* Reset SDI PLL */
++ REG_FLD_MOD(DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */
++}
++
++void dss_dump_regs(struct seq_file *s)
++{
++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dss_read_reg(r))
++
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ DUMPREG(DSS_REVISION);
++ DUMPREG(DSS_SYSCONFIG);
++ DUMPREG(DSS_SYSSTATUS);
++ DUMPREG(DSS_IRQSTATUS);
++ DUMPREG(DSS_CONTROL);
++ DUMPREG(DSS_SDI_CONTROL);
++ DUMPREG(DSS_PLL_CONTROL);
++ DUMPREG(DSS_SDI_STATUS);
++
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++#undef DUMPREG
++}
++
++void dss_select_clk_source(bool dsi, bool dispc)
++{
++ u32 r;
++ r = dss_read_reg(DSS_CONTROL);
++ r = FLD_MOD(r, dsi, 1, 1); /* DSI_CLK_SWITCH */
++ r = FLD_MOD(r, dispc, 0, 0); /* DISPC_CLK_SWITCH */
++ dss_write_reg(DSS_CONTROL, r);
++}
++
++int dss_get_dsi_clk_source(void)
++{
++ return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1);
++}
++
++int dss_get_dispc_clk_source(void)
++{
++ return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0);
++}
++
++static irqreturn_t dss_irq_handler_omap2(int irq, void *arg)
++{
++ dispc_irq_handler();
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t dss_irq_handler_omap3(int irq, void *arg)
++{
++ u32 irqstatus;
++
++ irqstatus = dss_read_reg(DSS_IRQSTATUS);
++
++ if (irqstatus & (1<<0)) /* DISPC_IRQ */
++ dispc_irq_handler();
++#ifdef CONFIG_OMAP2_DSS_DSI
++ if (irqstatus & (1<<1)) /* DSI_IRQ */
++ dsi_irq_handler();
++#endif
++
++ return IRQ_HANDLED;
++}
++
++static int _omap_dss_wait_reset(void)
++{
++ unsigned timeout = 1000;
++
++ while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) {
++ udelay(1);
++ if (!--timeout) {
++ DSSERR("soft reset failed\n");
++ return -ENODEV;
++ }
++ }
++
++ return 0;
++}
++
++static int _omap_dss_reset(void)
++{
++ /* Soft reset */
++ REG_FLD_MOD(DSS_SYSCONFIG, 1, 1, 1);
++ return _omap_dss_wait_reset();
++}
++
++void dss_set_venc_output(enum omap_dss_venc_type type)
++{
++ int l = 0;
++
++ if (type == OMAP_DSS_VENC_TYPE_COMPOSITE)
++ l = 0;
++ else if (type == OMAP_DSS_VENC_TYPE_SVIDEO)
++ l = 1;
++ else
++ BUG();
++
++ /* venc out selection. 0 = comp, 1 = svideo */
++ REG_FLD_MOD(DSS_CONTROL, l, 6, 6);
++}
++
++void dss_set_dac_pwrdn_bgz(bool enable)
++{
++ REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */
++}
++
++int dss_init(bool skip_init)
++{
++ int r;
++ u32 rev;
++
++ dss.base = ioremap(DSS_BASE, DSS_SZ_REGS);
++ if (!dss.base) {
++ DSSERR("can't ioremap DSS\n");
++ r = -ENOMEM;
++ goto fail0;
++ }
++
++ if (!skip_init) {
++ /* disable LCD and DIGIT output. This seems to fix the synclost
++ * problem that we get, if the bootloader starts the DSS and
++ * the kernel resets it */
++ omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
++
++ /* We need to wait here a bit, otherwise we sometimes start to
++ * get synclost errors, and after that only power cycle will
++ * restore DSS functionality. I have no idea why this happens.
++ * And we have to wait _before_ resetting the DSS, but after
++ * enabling clocks.
++ */
++ msleep(50);
++
++ _omap_dss_reset();
++ }
++
++ /* autoidle */
++ REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0);
++
++ /* Select DPLL */
++ REG_FLD_MOD(DSS_CONTROL, 0, 0, 0);
++
++#ifdef CONFIG_OMAP2_DSS_VENC
++ REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */
++ REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */
++ REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */
++#endif
++
++ r = request_irq(INT_24XX_DSS_IRQ,
++ cpu_is_omap24xx()
++ ? dss_irq_handler_omap2
++ : dss_irq_handler_omap3,
++ 0, "OMAP DSS", NULL);
++
++ if (r < 0) {
++ DSSERR("omap2 dss: request_irq failed\n");
++ goto fail1;
++ }
++
++ dss_save_context();
++
++ rev = dss_read_reg(DSS_REVISION);
++ printk(KERN_INFO "OMAP DSS rev %d.%d\n",
++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
++
++ return 0;
++
++fail1:
++ iounmap(dss.base);
++fail0:
++ return r;
++}
++
++void dss_exit(void)
++{
++ free_irq(INT_24XX_DSS_IRQ, NULL);
++
++ iounmap(dss.base);
++}
++
+diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
+new file mode 100644
+index 0000000..50f7f5f
+--- /dev/null
++++ b/drivers/video/omap2/dss/dss.h
+@@ -0,0 +1,356 @@
++/*
++ * linux/drivers/video/omap2/dss/dss.h
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef __OMAP2_DSS_H
++#define __OMAP2_DSS_H
++
++#ifdef CONFIG_OMAP2_DSS_DEBUG_SUPPORT
++#define DEBUG
++#endif
++
++#ifdef DEBUG
++extern unsigned int dss_debug;
++#ifdef DSS_SUBSYS_NAME
++#define DSSDBG(format, ...) \
++ if (dss_debug) \
++ printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME ": " format, \
++ ## __VA_ARGS__)
++#else
++#define DSSDBG(format, ...) \
++ if (dss_debug) \
++ printk(KERN_DEBUG "omapdss: " format, ## __VA_ARGS__)
++#endif
++
++#ifdef DSS_SUBSYS_NAME
++#define DSSDBGF(format, ...) \
++ if (dss_debug) \
++ printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME \
++ ": %s(" format ")\n", \
++ __func__, \
++ ## __VA_ARGS__)
++#else
++#define DSSDBGF(format, ...) \
++ if (dss_debug) \
++ printk(KERN_DEBUG "omapdss: " \
++ ": %s(" format ")\n", \
++ __func__, \
++ ## __VA_ARGS__)
++#endif
++
++#else /* DEBUG */
++#define DSSDBG(format, ...)
++#define DSSDBGF(format, ...)
++#endif
++
++
++#ifdef DSS_SUBSYS_NAME
++#define DSSERR(format, ...) \
++ printk(KERN_ERR "omapdss " DSS_SUBSYS_NAME " error: " format, \
++ ## __VA_ARGS__)
++#else
++#define DSSERR(format, ...) \
++ printk(KERN_ERR "omapdss error: " format, ## __VA_ARGS__)
++#endif
++
++#ifdef DSS_SUBSYS_NAME
++#define DSSINFO(format, ...) \
++ printk(KERN_INFO "omapdss " DSS_SUBSYS_NAME ": " format, \
++ ## __VA_ARGS__)
++#else
++#define DSSINFO(format, ...) \
++ printk(KERN_INFO "omapdss: " format, ## __VA_ARGS__)
++#endif
++
++#ifdef DSS_SUBSYS_NAME
++#define DSSWARN(format, ...) \
++ printk(KERN_WARNING "omapdss " DSS_SUBSYS_NAME ": " format, \
++ ## __VA_ARGS__)
++#else
++#define DSSWARN(format, ...) \
++ printk(KERN_WARNING "omapdss: " format, ## __VA_ARGS__)
++#endif
++
++/* OMAP TRM gives bitfields as start:end, where start is the higher bit
++ number. For example 7:0 */
++#define FLD_MASK(start, end) (((1 << (start - end + 1)) - 1) << (end))
++#define FLD_VAL(val, start, end) (((val) << end) & FLD_MASK(start, end))
++#define FLD_GET(val, start, end) (((val) & FLD_MASK(start, end)) >> (end))
++#define FLD_MOD(orig, val, start, end) \
++ (((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end))
++
++#define DISPC_MAX_FCK 173000000
++
++enum omap_burst_size {
++ OMAP_DSS_BURST_4x32 = 0,
++ OMAP_DSS_BURST_8x32 = 1,
++ OMAP_DSS_BURST_16x32 = 2,
++};
++
++enum omap_parallel_interface_mode {
++ OMAP_DSS_PARALLELMODE_BYPASS, /* MIPI DPI */
++ OMAP_DSS_PARALLELMODE_RFBI, /* MIPI DBI */
++ OMAP_DSS_PARALLELMODE_DSI,
++};
++
++enum dss_clock {
++ DSS_CLK_ICK = 1 << 0,
++ DSS_CLK_FCK1 = 1 << 1,
++ DSS_CLK_FCK2 = 1 << 2,
++ DSS_CLK_54M = 1 << 3,
++ DSS_CLK_96M = 1 << 4,
++};
++
++struct dispc_clock_info {
++ /* rates that we get with dividers below */
++ unsigned long fck;
++ unsigned long lck;
++ unsigned long pck;
++
++ /* dividers */
++ u16 fck_div;
++ u16 lck_div;
++ u16 pck_div;
++};
++
++struct dsi_clock_info {
++ /* rates that we get with dividers below */
++ unsigned long fint;
++ unsigned long dsiphy;
++ unsigned long clkin;
++ unsigned long dsi1_pll_fclk;
++ unsigned long dsi2_pll_fclk;
++ unsigned long lck;
++ unsigned long pck;
++
++ /* dividers */
++ u16 regn;
++ u16 regm;
++ u16 regm3;
++ u16 regm4;
++
++ u16 lck_div;
++ u16 pck_div;
++
++ u8 highfreq;
++ bool use_dss2_fck;
++};
++
++struct seq_file;
++struct platform_device;
++
++/* core */
++void dss_clk_enable(enum dss_clock clks);
++void dss_clk_disable(enum dss_clock clks);
++unsigned long dss_clk_get_rate(enum dss_clock clk);
++int dss_need_ctx_restore(void);
++void dss_dump_clocks(struct seq_file *s);
++struct bus_type *dss_get_bus(void);
++
++/* display */
++int dss_suspend_all_devices(void);
++int dss_resume_all_devices(void);
++
++void dss_init_device(struct platform_device *pdev,
++ struct omap_dss_device *dssdev);
++void dss_uninit_device(struct platform_device *pdev,
++ struct omap_dss_device *dssdev);
++bool dss_use_replication(struct omap_dss_device *dssdev,
++ enum omap_color_mode mode);
++void default_get_overlay_fifo_thresholds(enum omap_plane plane,
++ u32 fifo_size, enum omap_burst_size *burst_size,
++ u32 *fifo_low, u32 *fifo_high);
++
++/* manager */
++int dss_init_overlay_managers(struct platform_device *pdev);
++void dss_uninit_overlay_managers(struct platform_device *pdev);
++int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl);
++void dss_setup_partial_planes(struct omap_dss_device *dssdev,
++ u16 *x, u16 *y, u16 *w, u16 *h);
++void dss_start_update(struct omap_dss_device *dssdev);
++
++/* overlay */
++void dss_init_overlays(struct platform_device *pdev);
++void dss_uninit_overlays(struct platform_device *pdev);
++int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev);
++void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr);
++#ifdef L4_EXAMPLE
++void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr);
++#endif
++void dss_recheck_connections(struct omap_dss_device *dssdev, bool force);
++
++/* DSS */
++int dss_init(bool skip_init);
++void dss_exit(void);
++
++void dss_save_context(void);
++void dss_restore_context(void);
++
++void dss_dump_regs(struct seq_file *s);
++
++void dss_sdi_init(u8 datapairs);
++void dss_sdi_enable(void);
++void dss_sdi_disable(void);
++
++void dss_select_clk_source(bool dsi, bool dispc);
++int dss_get_dsi_clk_source(void);
++int dss_get_dispc_clk_source(void);
++void dss_set_venc_output(enum omap_dss_venc_type type);
++void dss_set_dac_pwrdn_bgz(bool enable);
++
++/* SDI */
++int sdi_init(bool skip_init);
++void sdi_exit(void);
++int sdi_init_display(struct omap_dss_device *display);
++
++/* DSI */
++int dsi_init(struct platform_device *pdev);
++void dsi_exit(void);
++
++void dsi_dump_clocks(struct seq_file *s);
++void dsi_dump_regs(struct seq_file *s);
++
++void dsi_save_context(void);
++void dsi_restore_context(void);
++
++int dsi_init_display(struct omap_dss_device *display);
++void dsi_irq_handler(void);
++unsigned long dsi_get_dsi1_pll_rate(void);
++unsigned long dsi_get_dsi2_pll_rate(void);
++int dsi_pll_calc_pck(bool is_tft, unsigned long req_pck,
++ struct dsi_clock_info *cinfo);
++int dsi_pll_program(struct dsi_clock_info *cinfo);
++int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv);
++void dsi_pll_uninit(void);
++void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
++ u32 fifo_size, enum omap_burst_size *burst_size,
++ u32 *fifo_low, u32 *fifo_high);
++
++/* DPI */
++int dpi_init(void);
++void dpi_exit(void);
++int dpi_init_display(struct omap_dss_device *dssdev);
++
++/* DISPC */
++int dispc_init(void);
++void dispc_exit(void);
++void dispc_dump_clocks(struct seq_file *s);
++void dispc_dump_regs(struct seq_file *s);
++void dispc_irq_handler(void);
++void dispc_fake_vsync_irq(void);
++
++void dispc_save_context(void);
++void dispc_restore_context(void);
++
++void dispc_enable_sidle(void);
++void dispc_disable_sidle(void);
++
++void dispc_lcd_enable_signal_polarity(bool act_high);
++void dispc_lcd_enable_signal(bool enable);
++void dispc_pck_free_enable(bool enable);
++void dispc_enable_fifohandcheck(bool enable);
++
++void dispc_set_lcd_size(u16 width, u16 height);
++void dispc_set_digit_size(u16 width, u16 height);
++u32 dispc_get_plane_fifo_size(enum omap_plane plane);
++void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high);
++void dispc_enable_fifomerge(bool enable);
++void dispc_set_burst_size(enum omap_plane plane,
++ enum omap_burst_size burst_size);
++
++void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr);
++void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr);
++void dispc_set_plane_pos(enum omap_plane plane, u16 x, u16 y);
++void dispc_set_plane_size(enum omap_plane plane, u16 width, u16 height);
++void dispc_set_channel_out(enum omap_plane plane,
++ enum omap_channel channel_out);
++
++int dispc_setup_plane(enum omap_plane plane,
++ u32 paddr, u16 screen_width,
++ u16 pos_x, u16 pos_y,
++ u16 width, u16 height,
++ u16 out_width, u16 out_height,
++ enum omap_color_mode color_mode,
++ bool ilace,
++ enum omap_dss_rotation_type rotation_type,
++ u8 rotation, bool mirror,
++ u8 global_alpha);
++
++bool dispc_go_busy(enum omap_channel channel);
++void dispc_go(enum omap_channel channel);
++void dispc_enable_lcd_out(bool enable);
++void dispc_enable_digit_out(bool enable);
++int dispc_enable_plane(enum omap_plane plane, bool enable);
++void dispc_enable_replication(enum omap_plane plane, bool enable);
++
++void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode);
++void dispc_set_tft_data_lines(u8 data_lines);
++void dispc_set_lcd_display_type(enum omap_lcd_display_type type);
++void dispc_set_loadmode(enum omap_dss_load_mode mode);
++
++void dispc_set_default_color(enum omap_channel channel, u32 color);
++u32 dispc_get_default_color(enum omap_channel channel);
++void dispc_set_trans_key(enum omap_channel ch,
++ enum omap_dss_trans_key_type type,
++ u32 trans_key);
++void dispc_get_trans_key(enum omap_channel ch,
++ enum omap_dss_trans_key_type *type,
++ u32 *trans_key);
++void dispc_enable_trans_key(enum omap_channel ch, bool enable);
++void dispc_enable_alpha_blending(enum omap_channel ch, bool enable);
++bool dispc_trans_key_enabled(enum omap_channel ch);
++bool dispc_alpha_blending_enabled(enum omap_channel ch);
++
++bool dispc_lcd_timings_ok(struct omap_video_timings *timings);
++void dispc_set_lcd_timings(struct omap_video_timings *timings);
++unsigned long dispc_fclk_rate(void);
++unsigned long dispc_lclk_rate(void);
++unsigned long dispc_pclk_rate(void);
++void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb);
++void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
++ u16 *lck_div, u16 *pck_div);
++int dispc_calc_clock_div(bool is_tft, unsigned long req_pck,
++ struct dispc_clock_info *cinfo);
++int dispc_set_clock_div(struct dispc_clock_info *cinfo);
++int dispc_get_clock_div(struct dispc_clock_info *cinfo);
++void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div);
++
++
++/* VENC */
++int venc_init(struct platform_device *pdev);
++void venc_exit(void);
++void venc_dump_regs(struct seq_file *s);
++int venc_init_display(struct omap_dss_device *display);
++
++/* RFBI */
++int rfbi_init(void);
++void rfbi_exit(void);
++void rfbi_dump_regs(struct seq_file *s);
++
++int rfbi_configure(int rfbi_module, int bpp, int lines);
++void rfbi_enable_rfbi(bool enable);
++void rfbi_transfer_area(u16 width, u16 height,
++ void (callback)(void *data), void *data);
++void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t);
++unsigned long rfbi_get_max_tx_rate(void);
++int rfbi_init_display(struct omap_dss_device *display);
++
++#endif
+diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
+new file mode 100644
+index 0000000..7ee0b2b
+--- /dev/null
++++ b/drivers/video/omap2/dss/manager.c
+@@ -0,0 +1,1487 @@
++/*
++ * linux/drivers/video/omap2/dss/manager.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "MANAGER"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/jiffies.h>
++
++#include <mach/display.h>
++#include <mach/cpu.h>
++
++#include "dss.h"
++
++static int num_managers;
++static struct list_head manager_list;
++
++static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name);
++}
++
++static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%s\n",
++ mgr->device ? mgr->device->name : "<none>");
++}
++
++static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
++ const char *buf, size_t size)
++{
++ int r = 0;
++ size_t len = size;
++ struct omap_dss_device *dssdev = NULL;
++
++ int match(struct omap_dss_device *dssdev, void *data)
++ {
++ const char *str = data;
++ return sysfs_streq(dssdev->name, str);
++ }
++
++ if (buf[size-1] == '\n')
++ --len;
++
++ if (len > 0)
++ dssdev = omap_dss_find_device((void *)buf, match);
++
++ if (len > 0 && dssdev == NULL)
++ return -EINVAL;
++
++ if (dssdev)
++ DSSDBG("display %s found\n", dssdev->name);
++
++ if (mgr->device) {
++ r = mgr->unset_device(mgr);
++ if (r) {
++ DSSERR("failed to unset display\n");
++ goto put_device;
++ }
++ }
++
++ if (dssdev) {
++ r = mgr->set_device(mgr, dssdev);
++ if (r) {
++ DSSERR("failed to set manager\n");
++ goto put_device;
++ }
++
++ r = mgr->apply(mgr);
++ if (r) {
++ DSSERR("failed to apply dispc config\n");
++ goto put_device;
++ }
++ }
++
++put_device:
++ if (dssdev)
++ omap_dss_put_device(dssdev);
++
++ return r ? r : size;
++}
++
++static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
++ char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.default_color);
++}
++
++static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
++ const char *buf, size_t size)
++{
++ struct omap_overlay_manager_info info;
++ u32 color;
++ int r;
++
++ if (sscanf(buf, "%d", &color) != 1)
++ return -EINVAL;
++
++ mgr->get_manager_info(mgr, &info);
++
++ info.default_color = color;
++
++ r = mgr->set_manager_info(mgr, &info);
++ if (r)
++ return r;
++
++ r = mgr->apply(mgr);
++ if (r)
++ return r;
++
++ return size;
++}
++
++static const char *trans_key_type_str[] = {
++ "gfx-destination",
++ "video-source",
++};
++
++static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr,
++ char *buf)
++{
++ enum omap_dss_trans_key_type key_type;
++
++ key_type = mgr->info.trans_key_type;
++ BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str));
++
++ return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]);
++}
++
++static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr,
++ const char *buf, size_t size)
++{
++ enum omap_dss_trans_key_type key_type;
++ struct omap_overlay_manager_info info;
++ int r;
++
++ for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
++ key_type < ARRAY_SIZE(trans_key_type_str); key_type++) {
++ if (sysfs_streq(buf, trans_key_type_str[key_type]))
++ break;
++ }
++
++ if (key_type == ARRAY_SIZE(trans_key_type_str))
++ return -EINVAL;
++
++ mgr->get_manager_info(mgr, &info);
++
++ info.trans_key_type = key_type;
++
++ r = mgr->set_manager_info(mgr, &info);
++ if (r)
++ return r;
++
++ r = mgr->apply(mgr);
++ if (r)
++ return r;
++
++ return size;
++}
++
++static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr,
++ char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_key);
++}
++
++static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr,
++ const char *buf, size_t size)
++{
++ struct omap_overlay_manager_info info;
++ u32 key_value;
++ int r;
++
++ if (sscanf(buf, "%d", &key_value) != 1)
++ return -EINVAL;
++
++ mgr->get_manager_info(mgr, &info);
++
++ info.trans_key = key_value;
++
++ r = mgr->set_manager_info(mgr, &info);
++ if (r)
++ return r;
++
++ r = mgr->apply(mgr);
++ if (r)
++ return r;
++
++ return size;
++}
++
++static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr,
++ char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_enabled);
++}
++
++static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr,
++ const char *buf, size_t size)
++{
++ struct omap_overlay_manager_info info;
++ int enable;
++ int r;
++
++ if (sscanf(buf, "%d", &enable) != 1)
++ return -EINVAL;
++
++ mgr->get_manager_info(mgr, &info);
++
++ info.trans_enabled = enable ? true : false;
++
++ r = mgr->set_manager_info(mgr, &info);
++ if (r)
++ return r;
++
++ r = mgr->apply(mgr);
++ if (r)
++ return r;
++
++ return size;
++}
++
++static ssize_t manager_alpha_blending_enabled_show(
++ struct omap_overlay_manager *mgr, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.alpha_enabled);
++}
++
++static ssize_t manager_alpha_blending_enabled_store(
++ struct omap_overlay_manager *mgr,
++ const char *buf, size_t size)
++{
++ struct omap_overlay_manager_info info;
++ int enable;
++ int r;
++
++ if (sscanf(buf, "%d", &enable) != 1)
++ return -EINVAL;
++
++ mgr->get_manager_info(mgr, &info);
++
++ info.alpha_enabled = enable ? true : false;
++
++ r = mgr->set_manager_info(mgr, &info);
++ if (r)
++ return r;
++
++ r = mgr->apply(mgr);
++ if (r)
++ return r;
++
++ return size;
++}
++
++struct manager_attribute {
++ struct attribute attr;
++ ssize_t (*show)(struct omap_overlay_manager *, char *);
++ ssize_t (*store)(struct omap_overlay_manager *, const char *, size_t);
++};
++
++#define MANAGER_ATTR(_name, _mode, _show, _store) \
++ struct manager_attribute manager_attr_##_name = \
++ __ATTR(_name, _mode, _show, _store)
++
++static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL);
++static MANAGER_ATTR(display, S_IRUGO|S_IWUSR,
++ manager_display_show, manager_display_store);
++static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR,
++ manager_default_color_show, manager_default_color_store);
++static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR,
++ manager_trans_key_type_show, manager_trans_key_type_store);
++static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR,
++ manager_trans_key_value_show, manager_trans_key_value_store);
++static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR,
++ manager_trans_key_enabled_show,
++ manager_trans_key_enabled_store);
++static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR,
++ manager_alpha_blending_enabled_show,
++ manager_alpha_blending_enabled_store);
++
++
++static struct attribute *manager_sysfs_attrs[] = {
++ &manager_attr_name.attr,
++ &manager_attr_display.attr,
++ &manager_attr_default_color.attr,
++ &manager_attr_trans_key_type.attr,
++ &manager_attr_trans_key_value.attr,
++ &manager_attr_trans_key_enabled.attr,
++ &manager_attr_alpha_blending_enabled.attr,
++ NULL
++};
++
++static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr,
++ char *buf)
++{
++ struct omap_overlay_manager *manager;
++ struct manager_attribute *manager_attr;
++
++ manager = container_of(kobj, struct omap_overlay_manager, kobj);
++ manager_attr = container_of(attr, struct manager_attribute, attr);
++
++ if (!manager_attr->show)
++ return -ENOENT;
++
++ return manager_attr->show(manager, buf);
++}
++
++static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
++ const char *buf, size_t size)
++{
++ struct omap_overlay_manager *manager;
++ struct manager_attribute *manager_attr;
++
++ manager = container_of(kobj, struct omap_overlay_manager, kobj);
++ manager_attr = container_of(attr, struct manager_attribute, attr);
++
++ if (!manager_attr->store)
++ return -ENOENT;
++
++ return manager_attr->store(manager, buf, size);
++}
++
++static struct sysfs_ops manager_sysfs_ops = {
++ .show = manager_attr_show,
++ .store = manager_attr_store,
++};
++
++static struct kobj_type manager_ktype = {
++ .sysfs_ops = &manager_sysfs_ops,
++ .default_attrs = manager_sysfs_attrs,
++};
++
++/*
++ * We have 4 levels of cache for the dispc settings. First two are in SW and
++ * the latter two in HW.
++ *
++ * +--------------------+
++ * |overlay/manager_info|
++ * +--------------------+
++ * v
++ * apply()
++ * v
++ * +--------------------+
++ * | dss_cache |
++ * +--------------------+
++ * v
++ * configure()
++ * v
++ * +--------------------+
++ * | shadow registers |
++ * +--------------------+
++ * v
++ * VFP or lcd/digit_enable
++ * v
++ * +--------------------+
++ * | registers |
++ * +--------------------+
++ */
++
++struct overlay_cache_data {
++ /* If true, cache changed, but not written to shadow registers. Set
++ * in apply(), cleared when registers written. */
++ bool dirty;
++ /* If true, shadow registers contain changed values not yet in real
++ * registers. Set when writing to shadow registers, cleared at
++ * VSYNC/EVSYNC */
++ bool shadow_dirty;
++
++ bool enabled;
++
++ u32 paddr;
++ void __iomem *vaddr;
++ u16 screen_width;
++ u16 width;
++ u16 height;
++ enum omap_color_mode color_mode;
++ u8 rotation;
++ enum omap_dss_rotation_type rotation_type;
++ bool mirror;
++
++ u16 pos_x;
++ u16 pos_y;
++ u16 out_width; /* if 0, out_width == width */
++ u16 out_height; /* if 0, out_height == height */
++ u8 global_alpha;
++
++ enum omap_channel channel;
++ bool replication;
++ bool ilace;
++
++ enum omap_burst_size burst_size;
++ u32 fifo_low;
++ u32 fifo_high;
++
++ bool manual_update;
++};
++
++struct manager_cache_data {
++ /* If true, cache changed, but not written to shadow registers. Set
++ * in apply(), cleared when registers written. */
++ bool dirty;
++ /* If true, shadow registers contain changed values not yet in real
++ * registers. Set when writing to shadow registers, cleared at
++ * VSYNC/EVSYNC */
++ bool shadow_dirty;
++
++ u32 default_color;
++
++ enum omap_dss_trans_key_type trans_key_type;
++ u32 trans_key;
++ bool trans_enabled;
++
++ bool alpha_enabled;
++
++ bool manual_upd_display;
++ bool manual_update;
++ bool do_manual_update;
++
++ /* manual update region */
++ u16 x, y, w, h;
++};
++
++static struct {
++ spinlock_t lock;
++ struct overlay_cache_data overlay_cache[3];
++ struct manager_cache_data manager_cache[2];
++
++ bool irq_enabled;
++} dss_cache;
++
++
++
++static int omap_dss_set_device(struct omap_overlay_manager *mgr,
++ struct omap_dss_device *dssdev)
++{
++ int i;
++ int r;
++
++ if (dssdev->manager) {
++ DSSERR("display '%s' already has a manager '%s'\n",
++ dssdev->name, dssdev->manager->name);
++ return -EINVAL;
++ }
++
++ if ((mgr->supported_displays & dssdev->type) == 0) {
++ DSSERR("display '%s' does not support manager '%s'\n",
++ dssdev->name, mgr->name);
++ return -EINVAL;
++ }
++
++ for (i = 0; i < mgr->num_overlays; i++) {
++ struct omap_overlay *ovl = mgr->overlays[i];
++
++ if (ovl->manager != mgr || !ovl->info.enabled)
++ continue;
++
++ r = dss_check_overlay(ovl, dssdev);
++ if (r)
++ return r;
++ }
++
++ dssdev->manager = mgr;
++ mgr->device = dssdev;
++ mgr->device_changed = true;
++
++ return 0;
++}
++
++static int omap_dss_unset_device(struct omap_overlay_manager *mgr)
++{
++ if (!mgr->device) {
++ DSSERR("failed to unset display, display not set.\n");
++ return -EINVAL;
++ }
++
++ mgr->device->manager = NULL;
++ mgr->device = NULL;
++ mgr->device_changed = true;
++
++ return 0;
++}
++
++static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
++{
++ unsigned long timeout = msecs_to_jiffies(500);
++ struct manager_cache_data *mc;
++ enum omap_channel channel;
++ u32 irq;
++ int r;
++ int i;
++
++ if (!mgr->device)
++ return 0;
++
++ if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) {
++ irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
++ channel = OMAP_DSS_CHANNEL_DIGIT;
++ } else {
++ if (mgr->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
++ enum omap_dss_update_mode mode;
++ mode = mgr->device->get_update_mode(mgr->device);
++ if (mode != OMAP_DSS_UPDATE_AUTO)
++ return 0;
++
++ irq = DISPC_IRQ_FRAMEDONE;
++ } else {
++ irq = DISPC_IRQ_VSYNC;
++ }
++ channel = OMAP_DSS_CHANNEL_LCD;
++ }
++
++ mc = &dss_cache.manager_cache[mgr->id];
++ i = 0;
++ while (1) {
++ unsigned long flags;
++ bool shadow_dirty, dirty;
++
++ spin_lock_irqsave(&dss_cache.lock, flags);
++ dirty = mc->dirty;
++ shadow_dirty = mc->shadow_dirty;
++ spin_unlock_irqrestore(&dss_cache.lock, flags);
++
++ if (!dirty && !shadow_dirty) {
++ r = 0;
++ break;
++ }
++
++ /* 4 iterations is the worst case:
++ * 1 - initial iteration, dirty = true (between VFP and VSYNC)
++ * 2 - first VSYNC, dirty = true
++ * 3 - dirty = false, shadow_dirty = true
++ * 4 - shadow_dirty = false */
++ if (i++ == 3) {
++ DSSERR("mgr(%d)->wait_for_go() not finishing\n",
++ mgr->id);
++ r = 0;
++ break;
++ }
++
++ r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
++ if (r == -ERESTARTSYS)
++ break;
++
++ if (r) {
++ DSSERR("mgr(%d)->wait_for_go() timeout\n", mgr->id);
++ break;
++ }
++ }
++
++ return r;
++}
++
++int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
++{
++ unsigned long timeout = msecs_to_jiffies(500);
++ enum omap_channel channel;
++ struct overlay_cache_data *oc;
++ struct omap_dss_device *dssdev;
++ u32 irq;
++ int r;
++ int i;
++
++ if (!ovl->manager || !ovl->manager->device)
++ return 0;
++
++ dssdev = ovl->manager->device;
++
++ if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
++ irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
++ channel = OMAP_DSS_CHANNEL_DIGIT;
++ } else {
++ if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
++ enum omap_dss_update_mode mode;
++ mode = dssdev->get_update_mode(dssdev);
++ if (mode != OMAP_DSS_UPDATE_AUTO)
++ return 0;
++
++ irq = DISPC_IRQ_FRAMEDONE;
++ } else {
++ irq = DISPC_IRQ_VSYNC;
++ }
++ channel = OMAP_DSS_CHANNEL_LCD;
++ }
++
++ oc = &dss_cache.overlay_cache[ovl->id];
++ i = 0;
++ while (1) {
++ unsigned long flags;
++ bool shadow_dirty, dirty;
++
++ spin_lock_irqsave(&dss_cache.lock, flags);
++ dirty = oc->dirty;
++ shadow_dirty = oc->shadow_dirty;
++ spin_unlock_irqrestore(&dss_cache.lock, flags);
++
++ if (!dirty && !shadow_dirty) {
++ r = 0;
++ break;
++ }
++
++ /* 4 iterations is the worst case:
++ * 1 - initial iteration, dirty = true (between VFP and VSYNC)
++ * 2 - first VSYNC, dirty = true
++ * 3 - dirty = false, shadow_dirty = true
++ * 4 - shadow_dirty = false */
++ if (i++ == 3) {
++ DSSERR("ovl(%d)->wait_for_go() not finishing\n",
++ ovl->id);
++ r = 0;
++ break;
++ }
++
++ r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
++ if (r == -ERESTARTSYS)
++ break;
++
++ if (r) {
++ DSSERR("ovl(%d)->wait_for_go() timeout\n", ovl->id);
++ break;
++ }
++ }
++
++ return r;
++}
++
++static int overlay_enabled(struct omap_overlay *ovl)
++{
++ return ovl->info.enabled && ovl->manager && ovl->manager->device;
++}
++
++/* Is rect1 a subset of rect2? */
++static bool rectangle_subset(int x1, int y1, int w1, int h1,
++ int x2, int y2, int w2, int h2)
++{
++ if (x1 < x2 || y1 < y2)
++ return false;
++
++ if (x1 + w1 > x2 + w2)
++ return false;
++
++ if (y1 + h1 > y2 + h2)
++ return false;
++
++ return true;
++}
++
++/* Do rect1 and rect2 overlap? */
++static bool rectangle_intersects(int x1, int y1, int w1, int h1,
++ int x2, int y2, int w2, int h2)
++{
++ if (x1 >= x2 + w2)
++ return false;
++
++ if (x2 >= x1 + w1)
++ return false;
++
++ if (y1 >= y2 + h2)
++ return false;
++
++ if (y2 >= y1 + h1)
++ return false;
++
++ return true;
++}
++
++static bool dispc_is_overlay_scaled(struct overlay_cache_data *oc)
++{
++ if (oc->out_width != 0 && oc->width != oc->out_width)
++ return true;
++
++ if (oc->out_height != 0 && oc->height != oc->out_height)
++ return true;
++
++ return false;
++}
++
++static int configure_overlay(enum omap_plane plane)
++{
++ struct overlay_cache_data *c;
++ struct manager_cache_data *mc;
++ u16 outw, outh;
++ u16 x, y, w, h;
++ u32 paddr;
++ int r;
++
++ DSSDBGF("%d", plane);
++
++ c = &dss_cache.overlay_cache[plane];
++
++ if (!c->enabled) {
++ dispc_enable_plane(plane, 0);
++ return 0;
++ }
++
++ mc = &dss_cache.manager_cache[c->channel];
++
++ x = c->pos_x;
++ y = c->pos_y;
++ w = c->width;
++ h = c->height;
++ outw = c->out_width == 0 ? c->width : c->out_width;
++ outh = c->out_height == 0 ? c->height : c->out_height;
++ paddr = c->paddr;
++
++ if (c->manual_update && mc->do_manual_update) {
++ unsigned bpp;
++ /* If the overlay is outside the update region, disable it */
++ if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h,
++ x, y, outw, outh)) {
++ dispc_enable_plane(plane, 0);
++ return 0;
++ }
++
++ switch (c->color_mode) {
++ case OMAP_DSS_COLOR_RGB16:
++ case OMAP_DSS_COLOR_ARGB16:
++ case OMAP_DSS_COLOR_YUV2:
++ case OMAP_DSS_COLOR_UYVY:
++ bpp = 16;
++ break;
++
++ case OMAP_DSS_COLOR_RGB24P:
++ bpp = 24;
++ break;
++
++ case OMAP_DSS_COLOR_RGB24U:
++ case OMAP_DSS_COLOR_ARGB32:
++ case OMAP_DSS_COLOR_RGBA32:
++ case OMAP_DSS_COLOR_RGBX32:
++ bpp = 32;
++ break;
++
++ default:
++ BUG();
++ }
++
++ if (dispc_is_overlay_scaled(c)) {
++ /* If the overlay is scaled, the update area has
++ * already been enlarged to cover the whole overlay. We
++ * only need to adjust x/y here */
++ x = c->pos_x - mc->x;
++ y = c->pos_y - mc->y;
++ } else {
++ if (mc->x > c->pos_x) {
++ x = 0;
++ w -= (mc->x - c->pos_x);
++ paddr += (mc->x - c->pos_x) * bpp / 8;
++ } else {
++ x = c->pos_x - mc->x;
++ }
++
++ if (mc->y > c->pos_y) {
++ y = 0;
++ h -= (mc->y - c->pos_y);
++ paddr += (mc->y - c->pos_y) * c->screen_width *
++ bpp / 8;
++ } else {
++ y = c->pos_y - mc->y;
++ }
++
++ if (mc->w < (x+w))
++ w -= (x+w) - (mc->w);
++
++ if (mc->h < (y+h))
++ h -= (y+h) - (mc->h);
++
++ outw = w;
++ outh = h;
++ }
++ }
++
++ r = dispc_setup_plane(plane,
++ paddr,
++ c->screen_width,
++ x, y,
++ w, h,
++ outw, outh,
++ c->color_mode,
++ c->ilace,
++ c->rotation_type,
++ c->rotation,
++ c->mirror,
++ c->global_alpha);
++
++ if (r) {
++ /* this shouldn't happen */
++ DSSERR("dispc_setup_plane failed for ovl %d\n", plane);
++ dispc_enable_plane(plane, 0);
++ return r;
++ }
++
++ dispc_enable_replication(plane, c->replication);
++
++ dispc_set_burst_size(plane, c->burst_size);
++ dispc_setup_plane_fifo(plane, c->fifo_low, c->fifo_high);
++
++ dispc_enable_plane(plane, 1);
++
++ return 0;
++}
++
++static void configure_manager(enum omap_channel channel)
++{
++ struct manager_cache_data *c;
++
++ DSSDBGF("%d", channel);
++
++ c = &dss_cache.manager_cache[channel];
++
++ dispc_set_trans_key(channel, c->trans_key_type, c->trans_key);
++ dispc_enable_trans_key(channel, c->trans_enabled);
++ dispc_enable_alpha_blending(channel, c->alpha_enabled);
++}
++
++/* configure_dispc() tries to write values from cache to shadow registers.
++ * It writes only to those managers/overlays that are not busy.
++ * returns 0 if everything could be written to shadow registers.
++ * returns 1 if not everything could be written to shadow registers. */
++static int configure_dispc(void)
++{
++ struct overlay_cache_data *oc;
++ struct manager_cache_data *mc;
++ const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache);
++ const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache);
++ int i;
++ int r;
++ bool mgr_busy[2];
++ bool mgr_go[2];
++ bool busy;
++
++ r = 0;
++ busy = false;
++
++ mgr_busy[0] = dispc_go_busy(0);
++ mgr_busy[1] = dispc_go_busy(1);
++ mgr_go[0] = false;
++ mgr_go[1] = false;
++
++ /* Commit overlay settings */
++ for (i = 0; i < num_ovls; ++i) {
++ oc = &dss_cache.overlay_cache[i];
++ mc = &dss_cache.manager_cache[oc->channel];
++
++ if (!oc->dirty)
++ continue;
++
++ if (oc->manual_update && !mc->do_manual_update)
++ continue;
++
++ if (mgr_busy[oc->channel]) {
++ busy = true;
++ continue;
++ }
++
++ r = configure_overlay(i);
++ if (r)
++ DSSERR("configure_overlay %d failed\n", i);
++
++ oc->dirty = false;
++ oc->shadow_dirty = true;
++ mgr_go[oc->channel] = true;
++ }
++
++ /* Commit manager settings */
++ for (i = 0; i < num_mgrs; ++i) {
++ mc = &dss_cache.manager_cache[i];
++
++ if (!mc->dirty)
++ continue;
++
++ if (mc->manual_update && !mc->do_manual_update)
++ continue;
++
++ if (mgr_busy[i]) {
++ busy = true;
++ continue;
++ }
++
++ configure_manager(i);
++ mc->dirty = false;
++ mc->shadow_dirty = true;
++ mgr_go[i] = true;
++ }
++
++ /* set GO */
++ for (i = 0; i < num_mgrs; ++i) {
++ mc = &dss_cache.manager_cache[i];
++
++ if (!mgr_go[i])
++ continue;
++
++ /* We don't need GO with manual update display. LCD iface will
++ * always be turned off after frame, and new settings will be
++ * taken in to use at next update */
++ if (!mc->manual_upd_display)
++ dispc_go(i);
++ }
++
++ if (busy)
++ r = 1;
++ else
++ r = 0;
++
++ return r;
++}
++
++/* Configure dispc for partial update. Return possibly modified update
++ * area */
++void dss_setup_partial_planes(struct omap_dss_device *dssdev,
++ u16 *xi, u16 *yi, u16 *wi, u16 *hi)
++{
++ struct overlay_cache_data *oc;
++ struct manager_cache_data *mc;
++ const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache);
++ struct omap_overlay_manager *mgr;
++ int i;
++ u16 x, y, w, h;
++ unsigned long flags;
++
++ x = *xi;
++ y = *yi;
++ w = *wi;
++ h = *hi;
++
++ DSSDBG("dispc_setup_partial_planes %d,%d %dx%d\n",
++ *xi, *yi, *wi, *hi);
++
++ mgr = dssdev->manager;
++
++ if (!mgr) {
++ DSSDBG("no manager\n");
++ return;
++ }
++
++ spin_lock_irqsave(&dss_cache.lock, flags);
++
++ /* We need to show the whole overlay if it is scaled. So look for
++ * those, and make the update area larger if found.
++ * Also mark the overlay cache dirty */
++ for (i = 0; i < num_ovls; ++i) {
++ unsigned x1, y1, x2, y2;
++ unsigned outw, outh;
++
++ oc = &dss_cache.overlay_cache[i];
++
++ if (oc->channel != mgr->id)
++ continue;
++
++ oc->dirty = true;
++
++ if (!oc->enabled)
++ continue;
++
++ if (!dispc_is_overlay_scaled(oc))
++ continue;
++
++ outw = oc->out_width == 0 ? oc->width : oc->out_width;
++ outh = oc->out_height == 0 ? oc->height : oc->out_height;
++
++ /* is the overlay outside the update region? */
++ if (!rectangle_intersects(x, y, w, h,
++ oc->pos_x, oc->pos_y,
++ outw, outh))
++ continue;
++
++ /* if the overlay totally inside the update region? */
++ if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh,
++ x, y, w, h))
++ continue;
++
++ if (x > oc->pos_x)
++ x1 = oc->pos_x;
++ else
++ x1 = x;
++
++ if (y > oc->pos_y)
++ y1 = oc->pos_y;
++ else
++ y1 = y;
++
++ if ((x + w) < (oc->pos_x + outw))
++ x2 = oc->pos_x + outw;
++ else
++ x2 = x + w;
++
++ if ((y + h) < (oc->pos_y + outh))
++ y2 = oc->pos_y + outh;
++ else
++ y2 = y + h;
++
++ x = x1;
++ y = y1;
++ w = x2 - x1;
++ h = y2 - y1;
++
++ DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n",
++ i, x, y, w, h);
++ }
++
++ mc = &dss_cache.manager_cache[mgr->id];
++ mc->do_manual_update = true;
++ mc->x = x;
++ mc->y = y;
++ mc->w = w;
++ mc->h = h;
++
++ configure_dispc();
++
++ mc->do_manual_update = false;
++
++ spin_unlock_irqrestore(&dss_cache.lock, flags);
++
++ *xi = x;
++ *yi = y;
++ *wi = w;
++ *hi = h;
++}
++
++void dss_start_update(struct omap_dss_device *dssdev)
++{
++ struct manager_cache_data *mc;
++ struct overlay_cache_data *oc;
++ const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache);
++ const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache);
++ struct omap_overlay_manager *mgr;
++ int i;
++
++ mgr = dssdev->manager;
++
++ for (i = 0; i < num_ovls; ++i) {
++ oc = &dss_cache.overlay_cache[i];
++ if (oc->channel != mgr->id)
++ continue;
++
++ oc->shadow_dirty = false;
++ }
++
++ for (i = 0; i < num_mgrs; ++i) {
++ mc = &dss_cache.manager_cache[i];
++ if (mgr->id != i)
++ continue;
++
++ mc->shadow_dirty = false;
++ }
++
++ dispc_enable_lcd_out(1);
++}
++
++static void dss_apply_irq_handler(void *data, u32 mask)
++{
++ struct manager_cache_data *mc;
++ struct overlay_cache_data *oc;
++ const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache);
++ const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache);
++ int i, r;
++ bool mgr_busy[2];
++
++ mgr_busy[0] = dispc_go_busy(0);
++ mgr_busy[1] = dispc_go_busy(1);
++
++ spin_lock(&dss_cache.lock);
++
++ for (i = 0; i < num_ovls; ++i) {
++ oc = &dss_cache.overlay_cache[i];
++ if (!mgr_busy[oc->channel])
++ oc->shadow_dirty = false;
++ }
++
++ for (i = 0; i < num_mgrs; ++i) {
++ mc = &dss_cache.manager_cache[i];
++ if (!mgr_busy[i])
++ mc->shadow_dirty = false;
++ }
++
++ r = configure_dispc();
++ if (r == 1)
++ goto end;
++
++ /* re-read busy flags */
++ mgr_busy[0] = dispc_go_busy(0);
++ mgr_busy[1] = dispc_go_busy(1);
++
++ /* keep running as long as there are busy managers, so that
++ * we can collect overlay-applied information */
++ for (i = 0; i < num_mgrs; ++i) {
++ if (mgr_busy[i])
++ goto end;
++ }
++
++ omap_dispc_unregister_isr(dss_apply_irq_handler, NULL,
++ DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD |
++ DISPC_IRQ_EVSYNC_EVEN);
++ dss_cache.irq_enabled = false;
++
++end:
++ spin_unlock(&dss_cache.lock);
++}
++
++static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
++{
++ struct overlay_cache_data *oc;
++ struct manager_cache_data *mc;
++ int i;
++ struct omap_overlay *ovl;
++ int num_planes_enabled = 0;
++ bool use_fifomerge;
++ unsigned long flags;
++ int r;
++
++ DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name);
++
++ spin_lock_irqsave(&dss_cache.lock, flags);
++
++ /* Configure overlays */
++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++ struct omap_dss_device *dssdev;
++
++ ovl = omap_dss_get_overlay(i);
++
++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++ continue;
++
++ oc = &dss_cache.overlay_cache[ovl->id];
++
++ if (!overlay_enabled(ovl)) {
++ if (oc->enabled) {
++ oc->enabled = false;
++ oc->dirty = true;
++ }
++ continue;
++ }
++
++ if (!ovl->info_dirty) {
++ if (oc->enabled)
++ ++num_planes_enabled;
++ continue;
++ }
++
++ dssdev = ovl->manager->device;
++
++ if (dss_check_overlay(ovl, dssdev)) {
++ if (oc->enabled) {
++ oc->enabled = false;
++ oc->dirty = true;
++ }
++ continue;
++ }
++
++ ovl->info_dirty = false;
++ oc->dirty = true;
++
++ oc->paddr = ovl->info.paddr;
++ oc->vaddr = ovl->info.vaddr;
++ oc->screen_width = ovl->info.screen_width;
++ oc->width = ovl->info.width;
++ oc->height = ovl->info.height;
++ oc->color_mode = ovl->info.color_mode;
++ oc->rotation = ovl->info.rotation;
++ oc->rotation_type = ovl->info.rotation_type;
++ oc->mirror = ovl->info.mirror;
++ oc->pos_x = ovl->info.pos_x;
++ oc->pos_y = ovl->info.pos_y;
++ oc->out_width = ovl->info.out_width;
++ oc->out_height = ovl->info.out_height;
++ oc->global_alpha = ovl->info.global_alpha;
++
++ oc->replication =
++ dss_use_replication(dssdev, ovl->info.color_mode);
++
++ oc->ilace = dssdev->type == OMAP_DISPLAY_TYPE_VENC;
++
++ oc->channel = ovl->manager->id;
++
++ oc->enabled = true;
++
++ oc->manual_update =
++ dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
++ dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO;
++
++ ++num_planes_enabled;
++ }
++
++ /* Configure managers */
++ list_for_each_entry(mgr, &manager_list, list) {
++ struct omap_dss_device *dssdev;
++
++ if (!(mgr->caps & OMAP_DSS_OVL_MGR_CAP_DISPC))
++ continue;
++
++ mc = &dss_cache.manager_cache[mgr->id];
++
++ if (mgr->device_changed) {
++ mgr->device_changed = false;
++ mgr->info_dirty = true;
++ }
++
++ if (!mgr->info_dirty)
++ continue;
++
++ if (!mgr->device)
++ continue;
++
++ dssdev = mgr->device;
++
++ mgr->info_dirty = false;
++ mc->dirty = true;
++
++ mc->default_color = mgr->info.default_color;
++ mc->trans_key_type = mgr->info.trans_key_type;
++ mc->trans_key = mgr->info.trans_key;
++ mc->trans_enabled = mgr->info.trans_enabled;
++ mc->alpha_enabled = mgr->info.alpha_enabled;
++
++ mc->manual_upd_display =
++ dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
++
++ mc->manual_update =
++ dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
++ dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO;
++ }
++
++ /* XXX TODO: Try to get fifomerge working. The problem is that it
++ * affects both managers, not individually but at the same time. This
++ * means the change has to be well synchronized. I guess the proper way
++ * is to have a two step process for fifo merge:
++ * fifomerge enable:
++ * 1. disable other planes, leaving one plane enabled
++ * 2. wait until the planes are disabled on HW
++ * 3. config merged fifo thresholds, enable fifomerge
++ * fifomerge disable:
++ * 1. config unmerged fifo thresholds, disable fifomerge
++ * 2. wait until fifo changes are in HW
++ * 3. enable planes
++ */
++ use_fifomerge = false;
++
++ /* Configure overlay fifos */
++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++ struct omap_dss_device *dssdev;
++ u32 size;
++
++ ovl = omap_dss_get_overlay(i);
++
++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++ continue;
++
++ oc = &dss_cache.overlay_cache[ovl->id];
++
++ if (!oc->enabled)
++ continue;
++
++ dssdev = ovl->manager->device;
++
++ size = dispc_get_plane_fifo_size(ovl->id);
++ if (use_fifomerge)
++ size *= 3;
++
++ switch (dssdev->type) {
++ case OMAP_DISPLAY_TYPE_DPI:
++ case OMAP_DISPLAY_TYPE_DBI:
++ case OMAP_DISPLAY_TYPE_SDI:
++ case OMAP_DISPLAY_TYPE_VENC:
++ default_get_overlay_fifo_thresholds(ovl->id, size,
++ &oc->burst_size, &oc->fifo_low,
++ &oc->fifo_high);
++ break;
++#ifdef CONFIG_OMAP2_DSS_DSI
++ case OMAP_DISPLAY_TYPE_DSI:
++ dsi_get_overlay_fifo_thresholds(ovl->id, size,
++ &oc->burst_size, &oc->fifo_low,
++ &oc->fifo_high);
++ break;
++#endif
++ default:
++ BUG();
++ }
++ }
++
++ r = 0;
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++ if (!dss_cache.irq_enabled) {
++ r = omap_dispc_register_isr(dss_apply_irq_handler, NULL,
++ DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD |
++ DISPC_IRQ_EVSYNC_EVEN);
++ dss_cache.irq_enabled = true;
++ }
++ configure_dispc();
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ spin_unlock_irqrestore(&dss_cache.lock, flags);
++
++ return r;
++}
++
++static int dss_check_manager(struct omap_overlay_manager *mgr)
++{
++ /* OMAP supports only graphics source transparency color key and alpha
++ * blending simultaneously. See TRM 15.4.2.4.2.2 Alpha Mode */
++
++ if (mgr->info.alpha_enabled && mgr->info.trans_enabled &&
++ mgr->info.trans_key_type != OMAP_DSS_COLOR_KEY_GFX_DST)
++ return -EINVAL;
++
++ return 0;
++}
++
++static int omap_dss_mgr_set_info(struct omap_overlay_manager *mgr,
++ struct omap_overlay_manager_info *info)
++{
++ int r;
++ struct omap_overlay_manager_info old_info;
++
++ old_info = mgr->info;
++ mgr->info = *info;
++
++ r = dss_check_manager(mgr);
++ if (r) {
++ mgr->info = old_info;
++ return r;
++ }
++
++ mgr->info_dirty = true;
++
++ return 0;
++}
++
++static void omap_dss_mgr_get_info(struct omap_overlay_manager *mgr,
++ struct omap_overlay_manager_info *info)
++{
++ *info = mgr->info;
++}
++
++static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager)
++{
++ ++num_managers;
++ list_add_tail(&manager->list, &manager_list);
++}
++
++int dss_init_overlay_managers(struct platform_device *pdev)
++{
++ int i, r;
++
++ spin_lock_init(&dss_cache.lock);
++
++ INIT_LIST_HEAD(&manager_list);
++
++ num_managers = 0;
++
++ for (i = 0; i < 2; ++i) {
++ struct omap_overlay_manager *mgr;
++ mgr = kzalloc(sizeof(*mgr), GFP_KERNEL);
++
++ BUG_ON(mgr == NULL);
++
++ switch (i) {
++ case 0:
++ mgr->name = "lcd";
++ mgr->id = OMAP_DSS_CHANNEL_LCD;
++ mgr->supported_displays =
++ OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
++ OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI;
++ break;
++ case 1:
++ mgr->name = "tv";
++ mgr->id = OMAP_DSS_CHANNEL_DIGIT;
++ mgr->supported_displays = OMAP_DISPLAY_TYPE_VENC;
++ break;
++ }
++
++ mgr->set_device = &omap_dss_set_device;
++ mgr->unset_device = &omap_dss_unset_device;
++ mgr->apply = &omap_dss_mgr_apply;
++ mgr->set_manager_info = &omap_dss_mgr_set_info;
++ mgr->get_manager_info = &omap_dss_mgr_get_info;
++ mgr->wait_for_go = &dss_mgr_wait_for_go;
++
++ mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC;
++
++ dss_overlay_setup_dispc_manager(mgr);
++
++ omap_dss_add_overlay_manager(mgr);
++
++ r = kobject_init_and_add(&mgr->kobj, &manager_ktype,
++ &pdev->dev.kobj, "manager%d", i);
++
++ if (r) {
++ DSSERR("failed to create sysfs file\n");
++ continue;
++ }
++ }
++
++#ifdef L4_EXAMPLE
++ {
++ int omap_dss_mgr_apply_l4(struct omap_overlay_manager *mgr)
++ {
++ DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name);
++
++ return 0;
++ }
++
++ struct omap_overlay_manager *mgr;
++ mgr = kzalloc(sizeof(*mgr), GFP_KERNEL);
++
++ BUG_ON(mgr == NULL);
++
++ mgr->name = "l4";
++ mgr->supported_displays =
++ OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI;
++
++ mgr->set_device = &omap_dss_set_device;
++ mgr->unset_device = &omap_dss_unset_device;
++ mgr->apply = &omap_dss_mgr_apply_l4;
++ mgr->set_manager_info = &omap_dss_mgr_set_info;
++ mgr->get_manager_info = &omap_dss_mgr_get_info;
++
++ dss_overlay_setup_l4_manager(mgr);
++
++ omap_dss_add_overlay_manager(mgr);
++
++ r = kobject_init_and_add(&mgr->kobj, &manager_ktype,
++ &pdev->dev.kobj, "managerl4");
++
++ if (r)
++ DSSERR("failed to create sysfs file\n");
++ }
++#endif
++
++ return 0;
++}
++
++void dss_uninit_overlay_managers(struct platform_device *pdev)
++{
++ struct omap_overlay_manager *mgr;
++
++ while (!list_empty(&manager_list)) {
++ mgr = list_first_entry(&manager_list,
++ struct omap_overlay_manager, list);
++ list_del(&mgr->list);
++ kobject_del(&mgr->kobj);
++ kobject_put(&mgr->kobj);
++ kfree(mgr);
++ }
++
++ num_managers = 0;
++}
++
++int omap_dss_get_num_overlay_managers(void)
++{
++ return num_managers;
++}
++EXPORT_SYMBOL(omap_dss_get_num_overlay_managers);
++
++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num)
++{
++ int i = 0;
++ struct omap_overlay_manager *mgr;
++
++ list_for_each_entry(mgr, &manager_list, list) {
++ if (i++ == num)
++ return mgr;
++ }
++
++ return NULL;
++}
++EXPORT_SYMBOL(omap_dss_get_overlay_manager);
++
+diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
+new file mode 100644
+index 0000000..c7cb81b
+--- /dev/null
++++ b/drivers/video/omap2/dss/overlay.c
+@@ -0,0 +1,673 @@
++/*
++ * linux/drivers/video/omap2/dss/overlay.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "OVERLAY"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/err.h>
++#include <linux/sysfs.h>
++#include <linux/kobject.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++#include <mach/display.h>
++
++#include "dss.h"
++
++static int num_overlays;
++static struct list_head overlay_list;
++
++static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name);
++}
++
++static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%s\n",
++ ovl->manager ? ovl->manager->name : "<none>");
++}
++
++static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
++ size_t size)
++{
++ int i, r;
++ struct omap_overlay_manager *mgr = NULL;
++ struct omap_overlay_manager *old_mgr;
++ int len = size;
++
++ if (buf[size-1] == '\n')
++ --len;
++
++ if (len > 0) {
++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
++ mgr = omap_dss_get_overlay_manager(i);
++
++ if (strncmp(buf, mgr->name, len) == 0)
++ break;
++
++ mgr = NULL;
++ }
++ }
++
++ if (len > 0 && mgr == NULL)
++ return -EINVAL;
++
++ if (mgr)
++ DSSDBG("manager %s found\n", mgr->name);
++
++ if (mgr == ovl->manager)
++ return size;
++
++ old_mgr = ovl->manager;
++
++ /* detach old manager */
++ if (old_mgr) {
++ r = ovl->unset_manager(ovl);
++ if (r) {
++ DSSERR("detach failed\n");
++ return r;
++ }
++
++ r = old_mgr->apply(old_mgr);
++ if (r)
++ return r;
++ }
++
++ if (mgr) {
++ r = ovl->set_manager(ovl, mgr);
++ if (r) {
++ DSSERR("Failed to attach overlay\n");
++ return r;
++ }
++
++ r = mgr->apply(mgr);
++ if (r)
++ return r;
++ }
++
++ return size;
++}
++
++static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%d,%d\n",
++ ovl->info.width, ovl->info.height);
++}
++
++static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.screen_width);
++}
++
++static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%d,%d\n",
++ ovl->info.pos_x, ovl->info.pos_y);
++}
++
++static ssize_t overlay_position_store(struct omap_overlay *ovl,
++ const char *buf, size_t size)
++{
++ int r;
++ char *last;
++ struct omap_overlay_info info;
++
++ ovl->get_overlay_info(ovl, &info);
++
++ info.pos_x = simple_strtoul(buf, &last, 10);
++ ++last;
++ if (last - buf >= size)
++ return -EINVAL;
++
++ info.pos_y = simple_strtoul(last, &last, 10);
++
++ r = ovl->set_overlay_info(ovl, &info);
++ if (r)
++ return r;
++
++ if (ovl->manager) {
++ r = ovl->manager->apply(ovl->manager);
++ if (r)
++ return r;
++ }
++
++ return size;
++}
++
++static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%d,%d\n",
++ ovl->info.out_width, ovl->info.out_height);
++}
++
++static ssize_t overlay_output_size_store(struct omap_overlay *ovl,
++ const char *buf, size_t size)
++{
++ int r;
++ char *last;
++ struct omap_overlay_info info;
++
++ ovl->get_overlay_info(ovl, &info);
++
++ info.out_width = simple_strtoul(buf, &last, 10);
++ ++last;
++ if (last - buf >= size)
++ return -EINVAL;
++
++ info.out_height = simple_strtoul(last, &last, 10);
++
++ r = ovl->set_overlay_info(ovl, &info);
++ if (r)
++ return r;
++
++ if (ovl->manager) {
++ r = ovl->manager->apply(ovl->manager);
++ if (r)
++ return r;
++ }
++
++ return size;
++}
++
++static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.enabled);
++}
++
++static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf,
++ size_t size)
++{
++ int r;
++ struct omap_overlay_info info;
++
++ ovl->get_overlay_info(ovl, &info);
++
++ info.enabled = simple_strtoul(buf, NULL, 10);
++
++ r = ovl->set_overlay_info(ovl, &info);
++ if (r)
++ return r;
++
++ if (ovl->manager) {
++ r = ovl->manager->apply(ovl->manager);
++ if (r)
++ return r;
++ }
++
++ return size;
++}
++
++static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf)
++{
++ return snprintf(buf, PAGE_SIZE, "%d\n",
++ ovl->info.global_alpha);
++}
++
++static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl,
++ const char *buf, size_t size)
++{
++ int r;
++ struct omap_overlay_info info;
++
++ ovl->get_overlay_info(ovl, &info);
++
++ /* Video1 plane does not support global alpha
++ * to always make it 255 completely opaque
++ */
++ if (ovl->id == OMAP_DSS_VIDEO1)
++ info.global_alpha = 255;
++ else
++ info.global_alpha = simple_strtoul(buf, NULL, 10);
++
++ r = ovl->set_overlay_info(ovl, &info);
++ if (r)
++ return r;
++
++ if (ovl->manager) {
++ r = ovl->manager->apply(ovl->manager);
++ if (r)
++ return r;
++ }
++
++ return size;
++}
++
++struct overlay_attribute {
++ struct attribute attr;
++ ssize_t (*show)(struct omap_overlay *, char *);
++ ssize_t (*store)(struct omap_overlay *, const char *, size_t);
++};
++
++#define OVERLAY_ATTR(_name, _mode, _show, _store) \
++ struct overlay_attribute overlay_attr_##_name = \
++ __ATTR(_name, _mode, _show, _store)
++
++static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL);
++static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR,
++ overlay_manager_show, overlay_manager_store);
++static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL);
++static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL);
++static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR,
++ overlay_position_show, overlay_position_store);
++static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR,
++ overlay_output_size_show, overlay_output_size_store);
++static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
++ overlay_enabled_show, overlay_enabled_store);
++static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR,
++ overlay_global_alpha_show, overlay_global_alpha_store);
++
++static struct attribute *overlay_sysfs_attrs[] = {
++ &overlay_attr_name.attr,
++ &overlay_attr_manager.attr,
++ &overlay_attr_input_size.attr,
++ &overlay_attr_screen_width.attr,
++ &overlay_attr_position.attr,
++ &overlay_attr_output_size.attr,
++ &overlay_attr_enabled.attr,
++ &overlay_attr_global_alpha.attr,
++ NULL
++};
++
++static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr,
++ char *buf)
++{
++ struct omap_overlay *overlay;
++ struct overlay_attribute *overlay_attr;
++
++ overlay = container_of(kobj, struct omap_overlay, kobj);
++ overlay_attr = container_of(attr, struct overlay_attribute, attr);
++
++ if (!overlay_attr->show)
++ return -ENOENT;
++
++ return overlay_attr->show(overlay, buf);
++}
++
++static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
++ const char *buf, size_t size)
++{
++ struct omap_overlay *overlay;
++ struct overlay_attribute *overlay_attr;
++
++ overlay = container_of(kobj, struct omap_overlay, kobj);
++ overlay_attr = container_of(attr, struct overlay_attribute, attr);
++
++ if (!overlay_attr->store)
++ return -ENOENT;
++
++ return overlay_attr->store(overlay, buf, size);
++}
++
++static struct sysfs_ops overlay_sysfs_ops = {
++ .show = overlay_attr_show,
++ .store = overlay_attr_store,
++};
++
++static struct kobj_type overlay_ktype = {
++ .sysfs_ops = &overlay_sysfs_ops,
++ .default_attrs = overlay_sysfs_attrs,
++};
++
++/* Check if overlay parameters are compatible with display */
++int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev)
++{
++ struct omap_overlay_info *info;
++ u16 outw, outh;
++ u16 dw, dh;
++
++ if (!dssdev)
++ return 0;
++
++ if (!ovl->info.enabled)
++ return 0;
++
++ info = &ovl->info;
++
++ if (info->paddr == 0) {
++ DSSDBG("check_overlay failed: paddr 0\n");
++ return -EINVAL;
++ }
++
++ dssdev->get_resolution(dssdev, &dw, &dh);
++
++ DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n",
++ ovl->id,
++ info->pos_x, info->pos_y,
++ info->width, info->height,
++ info->out_width, info->out_height,
++ dw, dh);
++
++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
++ outw = info->width;
++ outh = info->height;
++ } else {
++ if (info->out_width == 0)
++ outw = info->width;
++ else
++ outw = info->out_width;
++
++ if (info->out_height == 0)
++ outh = info->height;
++ else
++ outh = info->out_height;
++ }
++
++ if (dw < info->pos_x + outw) {
++ DSSDBG("check_overlay failed 1: %d < %d + %d\n",
++ dw, info->pos_x, outw);
++ return -EINVAL;
++ }
++
++ if (dh < info->pos_y + outh) {
++ DSSDBG("check_overlay failed 2: %d < %d + %d\n",
++ dh, info->pos_y, outh);
++ return -EINVAL;
++ }
++
++ if ((ovl->supported_modes & info->color_mode) == 0) {
++ DSSERR("overlay doesn't support mode %d\n", info->color_mode);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static int dss_ovl_set_overlay_info(struct omap_overlay *ovl,
++ struct omap_overlay_info *info)
++{
++ int r;
++ struct omap_overlay_info old_info;
++
++ old_info = ovl->info;
++ ovl->info = *info;
++
++ if (ovl->manager) {
++ r = dss_check_overlay(ovl, ovl->manager->device);
++ if (r) {
++ ovl->info = old_info;
++ return r;
++ }
++ }
++
++ ovl->info_dirty = true;
++
++ return 0;
++}
++
++static void dss_ovl_get_overlay_info(struct omap_overlay *ovl,
++ struct omap_overlay_info *info)
++{
++ *info = ovl->info;
++}
++
++static int dss_ovl_wait_for_go(struct omap_overlay *ovl)
++{
++ return dss_mgr_wait_for_go_ovl(ovl);
++}
++
++static int omap_dss_set_manager(struct omap_overlay *ovl,
++ struct omap_overlay_manager *mgr)
++{
++ if (!mgr)
++ return -EINVAL;
++
++ if (ovl->manager) {
++ DSSERR("overlay '%s' already has a manager '%s'\n",
++ ovl->name, ovl->manager->name);
++ return -EINVAL;
++ }
++
++ if (ovl->info.enabled) {
++ DSSERR("overlay has to be disabled to change the manager\n");
++ return -EINVAL;
++ }
++
++ ovl->manager = mgr;
++
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++ /* XXX: on manual update display, in auto update mode, a bug happens
++ * here. When an overlay is first enabled on LCD, then it's disabled,
++ * and the manager is changed to TV, we sometimes get SYNC_LOST_DIGIT
++ * errors. Waiting before changing the channel_out fixes it. I'm
++ * guessing that the overlay is still somehow being used for the LCD,
++ * but I don't understand how or why. */
++ msleep(40);
++ dispc_set_channel_out(ovl->id, mgr->id);
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ return 0;
++}
++
++static int omap_dss_unset_manager(struct omap_overlay *ovl)
++{
++ int r;
++
++ if (!ovl->manager) {
++ DSSERR("failed to detach overlay: manager not set\n");
++ return -EINVAL;
++ }
++
++ if (ovl->info.enabled) {
++ DSSERR("overlay has to be disabled to unset the manager\n");
++ return -EINVAL;
++ }
++
++ r = ovl->wait_for_go(ovl);
++ if (r)
++ return r;
++
++ ovl->manager = NULL;
++
++ return 0;
++}
++
++int omap_dss_get_num_overlays(void)
++{
++ return num_overlays;
++}
++EXPORT_SYMBOL(omap_dss_get_num_overlays);
++
++struct omap_overlay *omap_dss_get_overlay(int num)
++{
++ int i = 0;
++ struct omap_overlay *ovl;
++
++ list_for_each_entry(ovl, &overlay_list, list) {
++ if (i++ == num)
++ return ovl;
++ }
++
++ return NULL;
++}
++EXPORT_SYMBOL(omap_dss_get_overlay);
++
++static void omap_dss_add_overlay(struct omap_overlay *overlay)
++{
++ ++num_overlays;
++ list_add_tail(&overlay->list, &overlay_list);
++}
++
++static struct omap_overlay *dispc_overlays[3];
++
++void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr)
++{
++ mgr->num_overlays = 3;
++ mgr->overlays = dispc_overlays;
++}
++
++#ifdef L4_EXAMPLE
++static struct omap_overlay *l4_overlays[1];
++void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr)
++{
++ mgr->num_overlays = 1;
++ mgr->overlays = l4_overlays;
++}
++#endif
++
++void dss_init_overlays(struct platform_device *pdev)
++{
++ int i, r;
++
++ INIT_LIST_HEAD(&overlay_list);
++
++ num_overlays = 0;
++
++ for (i = 0; i < 3; ++i) {
++ struct omap_overlay *ovl;
++ ovl = kzalloc(sizeof(*ovl), GFP_KERNEL);
++
++ BUG_ON(ovl == NULL);
++
++ switch (i) {
++ case 0:
++ ovl->name = "gfx";
++ ovl->id = OMAP_DSS_GFX;
++ ovl->supported_modes = OMAP_DSS_COLOR_GFX_OMAP3;
++ ovl->caps = OMAP_DSS_OVL_CAP_DISPC;
++ ovl->info.global_alpha = 255;
++ break;
++ case 1:
++ ovl->name = "vid1";
++ ovl->id = OMAP_DSS_VIDEO1;
++ ovl->supported_modes = OMAP_DSS_COLOR_VID_OMAP3;
++ ovl->caps = OMAP_DSS_OVL_CAP_SCALE |
++ OMAP_DSS_OVL_CAP_DISPC;
++ ovl->info.global_alpha = 255;
++ break;
++ case 2:
++ ovl->name = "vid2";
++ ovl->id = OMAP_DSS_VIDEO2;
++ ovl->supported_modes = OMAP_DSS_COLOR_VID_OMAP3;
++ ovl->caps = OMAP_DSS_OVL_CAP_SCALE |
++ OMAP_DSS_OVL_CAP_DISPC;
++ ovl->info.global_alpha = 255;
++ break;
++ }
++
++ ovl->set_manager = &omap_dss_set_manager;
++ ovl->unset_manager = &omap_dss_unset_manager;
++ ovl->set_overlay_info = &dss_ovl_set_overlay_info;
++ ovl->get_overlay_info = &dss_ovl_get_overlay_info;
++ ovl->wait_for_go = &dss_ovl_wait_for_go;
++
++ omap_dss_add_overlay(ovl);
++
++ r = kobject_init_and_add(&ovl->kobj, &overlay_ktype,
++ &pdev->dev.kobj, "overlay%d", i);
++
++ if (r) {
++ DSSERR("failed to create sysfs file\n");
++ continue;
++ }
++
++ dispc_overlays[i] = ovl;
++ }
++
++#ifdef L4_EXAMPLE
++ {
++ struct omap_overlay *ovl;
++ ovl = kzalloc(sizeof(*ovl), GFP_KERNEL);
++
++ BUG_ON(ovl == NULL);
++
++ ovl->name = "l4";
++ ovl->supported_modes = OMAP_DSS_COLOR_RGB24U;
++
++ ovl->set_manager = &omap_dss_set_manager;
++ ovl->unset_manager = &omap_dss_unset_manager;
++ ovl->set_overlay_info = &dss_ovl_set_overlay_info;
++ ovl->get_overlay_info = &dss_ovl_get_overlay_info;
++
++ omap_dss_add_overlay(ovl);
++
++ r = kobject_init_and_add(&ovl->kobj, &overlay_ktype,
++ &pdev->dev.kobj, "overlayl4");
++
++ if (r)
++ DSSERR("failed to create sysfs file\n");
++
++ l4_overlays[0] = ovl;
++ }
++#endif
++}
++
++/* connect overlays to the new device, if not already connected. if force
++ * selected, connect always. */
++void dss_recheck_connections(struct omap_dss_device *dssdev, bool force)
++{
++ int i;
++ struct omap_overlay_manager *lcd_mgr;
++ struct omap_overlay_manager *tv_mgr;
++ struct omap_overlay_manager *mgr = NULL;
++
++ lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD);
++ tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV);
++
++ if (dssdev->type != OMAP_DISPLAY_TYPE_VENC) {
++ if (!lcd_mgr->device || force) {
++ if (lcd_mgr->device)
++ lcd_mgr->unset_device(lcd_mgr);
++ lcd_mgr->set_device(lcd_mgr, dssdev);
++ mgr = lcd_mgr;
++ }
++ }
++
++ if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
++ if (!tv_mgr->device || force) {
++ if (tv_mgr->device)
++ tv_mgr->unset_device(tv_mgr);
++ tv_mgr->set_device(tv_mgr, dssdev);
++ mgr = tv_mgr;
++ }
++ }
++
++ if (mgr) {
++ for (i = 0; i < 3; i++) {
++ struct omap_overlay *ovl;
++ ovl = omap_dss_get_overlay(i);
++ if (!ovl->manager || force) {
++ if (ovl->manager)
++ omap_dss_unset_manager(ovl);
++ omap_dss_set_manager(ovl, mgr);
++ }
++ }
++ }
++}
++
++void dss_uninit_overlays(struct platform_device *pdev)
++{
++ struct omap_overlay *ovl;
++
++ while (!list_empty(&overlay_list)) {
++ ovl = list_first_entry(&overlay_list,
++ struct omap_overlay, list);
++ list_del(&ovl->list);
++ kobject_del(&ovl->kobj);
++ kobject_put(&ovl->kobj);
++ kfree(ovl);
++ }
++
++ num_overlays = 0;
++}
++
+diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
+new file mode 100644
+index 0000000..9dd2349
+--- /dev/null
++++ b/drivers/video/omap2/dss/rfbi.c
+@@ -0,0 +1,1310 @@
++/*
++ * linux/drivers/video/omap2/dss/rfbi.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "RFBI"
++
++#include <linux/kernel.h>
++#include <linux/dma-mapping.h>
++#include <linux/vmalloc.h>
++#include <linux/clk.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/kfifo.h>
++#include <linux/ktime.h>
++#include <linux/hrtimer.h>
++#include <linux/seq_file.h>
++
++#include <mach/board.h>
++#include <mach/display.h>
++#include "dss.h"
++
++/*#define MEASURE_PERF*/
++
++#define RFBI_BASE 0x48050800
++
++struct rfbi_reg { u16 idx; };
++
++#define RFBI_REG(idx) ((const struct rfbi_reg) { idx })
++
++#define RFBI_REVISION RFBI_REG(0x0000)
++#define RFBI_SYSCONFIG RFBI_REG(0x0010)
++#define RFBI_SYSSTATUS RFBI_REG(0x0014)
++#define RFBI_CONTROL RFBI_REG(0x0040)
++#define RFBI_PIXEL_CNT RFBI_REG(0x0044)
++#define RFBI_LINE_NUMBER RFBI_REG(0x0048)
++#define RFBI_CMD RFBI_REG(0x004c)
++#define RFBI_PARAM RFBI_REG(0x0050)
++#define RFBI_DATA RFBI_REG(0x0054)
++#define RFBI_READ RFBI_REG(0x0058)
++#define RFBI_STATUS RFBI_REG(0x005c)
++
++#define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18)
++#define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18)
++#define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18)
++#define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18)
++#define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18)
++#define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18)
++
++#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090)
++#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094)
++
++#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param))
++
++#define REG_FLD_MOD(idx, val, start, end) \
++ rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end))
++
++/* To work around an RFBI transfer rate limitation */
++#define OMAP_RFBI_RATE_LIMIT 1
++
++enum omap_rfbi_cycleformat {
++ OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0,
++ OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1,
++ OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2,
++ OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3,
++};
++
++enum omap_rfbi_datatype {
++ OMAP_DSS_RFBI_DATATYPE_12 = 0,
++ OMAP_DSS_RFBI_DATATYPE_16 = 1,
++ OMAP_DSS_RFBI_DATATYPE_18 = 2,
++ OMAP_DSS_RFBI_DATATYPE_24 = 3,
++};
++
++enum omap_rfbi_parallelmode {
++ OMAP_DSS_RFBI_PARALLELMODE_8 = 0,
++ OMAP_DSS_RFBI_PARALLELMODE_9 = 1,
++ OMAP_DSS_RFBI_PARALLELMODE_12 = 2,
++ OMAP_DSS_RFBI_PARALLELMODE_16 = 3,
++};
++
++enum update_cmd {
++ RFBI_CMD_UPDATE = 0,
++ RFBI_CMD_SYNC = 1,
++};
++
++static int rfbi_convert_timings(struct rfbi_timings *t);
++static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
++static void process_cmd_fifo(void);
++
++static struct {
++ void __iomem *base;
++
++ unsigned long l4_khz;
++
++ enum omap_rfbi_datatype datatype;
++ enum omap_rfbi_parallelmode parallelmode;
++
++ enum omap_rfbi_te_mode te_mode;
++ int te_enabled;
++
++ void (*framedone_callback)(void *data);
++ void *framedone_callback_data;
++
++ struct omap_dss_device *dssdev[2];
++
++ struct kfifo *cmd_fifo;
++ spinlock_t cmd_lock;
++ struct completion cmd_done;
++ atomic_t cmd_fifo_full;
++ atomic_t cmd_pending;
++#ifdef MEASURE_PERF
++ unsigned perf_bytes;
++ ktime_t perf_setup_time;
++ ktime_t perf_start_time;
++#endif
++} rfbi;
++
++struct update_region {
++ u16 x;
++ u16 y;
++ u16 w;
++ u16 h;
++};
++
++struct update_param {
++ u8 rfbi_module;
++ u8 cmd;
++
++ union {
++ struct update_region r;
++ struct completion *sync;
++ } par;
++};
++
++static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
++{
++ __raw_writel(val, rfbi.base + idx.idx);
++}
++
++static inline u32 rfbi_read_reg(const struct rfbi_reg idx)
++{
++ return __raw_readl(rfbi.base + idx.idx);
++}
++
++static void rfbi_enable_clocks(bool enable)
++{
++ if (enable)
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++ else
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++}
++
++void omap_rfbi_write_command(const void *buf, u32 len)
++{
++ rfbi_enable_clocks(1);
++ switch (rfbi.parallelmode) {
++ case OMAP_DSS_RFBI_PARALLELMODE_8:
++ {
++ const u8 *b = buf;
++ for (; len; len--)
++ rfbi_write_reg(RFBI_CMD, *b++);
++ break;
++ }
++
++ case OMAP_DSS_RFBI_PARALLELMODE_16:
++ {
++ const u16 *w = buf;
++ BUG_ON(len & 1);
++ for (; len; len -= 2)
++ rfbi_write_reg(RFBI_CMD, *w++);
++ break;
++ }
++
++ case OMAP_DSS_RFBI_PARALLELMODE_9:
++ case OMAP_DSS_RFBI_PARALLELMODE_12:
++ default:
++ BUG();
++ }
++ rfbi_enable_clocks(0);
++}
++EXPORT_SYMBOL(omap_rfbi_write_command);
++
++void omap_rfbi_read_data(void *buf, u32 len)
++{
++ rfbi_enable_clocks(1);
++ switch (rfbi.parallelmode) {
++ case OMAP_DSS_RFBI_PARALLELMODE_8:
++ {
++ u8 *b = buf;
++ for (; len; len--) {
++ rfbi_write_reg(RFBI_READ, 0);
++ *b++ = rfbi_read_reg(RFBI_READ);
++ }
++ break;
++ }
++
++ case OMAP_DSS_RFBI_PARALLELMODE_16:
++ {
++ u16 *w = buf;
++ BUG_ON(len & ~1);
++ for (; len; len -= 2) {
++ rfbi_write_reg(RFBI_READ, 0);
++ *w++ = rfbi_read_reg(RFBI_READ);
++ }
++ break;
++ }
++
++ case OMAP_DSS_RFBI_PARALLELMODE_9:
++ case OMAP_DSS_RFBI_PARALLELMODE_12:
++ default:
++ BUG();
++ }
++ rfbi_enable_clocks(0);
++}
++EXPORT_SYMBOL(omap_rfbi_read_data);
++
++void omap_rfbi_write_data(const void *buf, u32 len)
++{
++ rfbi_enable_clocks(1);
++ switch (rfbi.parallelmode) {
++ case OMAP_DSS_RFBI_PARALLELMODE_8:
++ {
++ const u8 *b = buf;
++ for (; len; len--)
++ rfbi_write_reg(RFBI_PARAM, *b++);
++ break;
++ }
++
++ case OMAP_DSS_RFBI_PARALLELMODE_16:
++ {
++ const u16 *w = buf;
++ BUG_ON(len & 1);
++ for (; len; len -= 2)
++ rfbi_write_reg(RFBI_PARAM, *w++);
++ break;
++ }
++
++ case OMAP_DSS_RFBI_PARALLELMODE_9:
++ case OMAP_DSS_RFBI_PARALLELMODE_12:
++ default:
++ BUG();
++
++ }
++ rfbi_enable_clocks(0);
++}
++EXPORT_SYMBOL(omap_rfbi_write_data);
++
++void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
++ u16 x, u16 y,
++ u16 w, u16 h)
++{
++ int start_offset = scr_width * y + x;
++ int horiz_offset = scr_width - w;
++ int i;
++
++ rfbi_enable_clocks(1);
++
++ if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
++ const u16 __iomem *pd = buf;
++ pd += start_offset;
++
++ for (; h; --h) {
++ for (i = 0; i < w; ++i) {
++ const u8 __iomem *b = (const u8 __iomem *)pd;
++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
++ ++pd;
++ }
++ pd += horiz_offset;
++ }
++ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 &&
++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
++ const u32 __iomem *pd = buf;
++ pd += start_offset;
++
++ for (; h; --h) {
++ for (i = 0; i < w; ++i) {
++ const u8 __iomem *b = (const u8 __iomem *)pd;
++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2));
++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
++ ++pd;
++ }
++ pd += horiz_offset;
++ }
++ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) {
++ const u16 __iomem *pd = buf;
++ pd += start_offset;
++
++ for (; h; --h) {
++ for (i = 0; i < w; ++i) {
++ rfbi_write_reg(RFBI_PARAM, __raw_readw(pd));
++ ++pd;
++ }
++ pd += horiz_offset;
++ }
++ } else {
++ BUG();
++ }
++
++ rfbi_enable_clocks(0);
++}
++EXPORT_SYMBOL(omap_rfbi_write_pixels);
++
++#ifdef MEASURE_PERF
++static void perf_mark_setup(void)
++{
++ rfbi.perf_setup_time = ktime_get();
++}
++
++static void perf_mark_start(void)
++{
++ rfbi.perf_start_time = ktime_get();
++}
++
++static void perf_show(const char *name)
++{
++ ktime_t t, setup_time, trans_time;
++ u32 total_bytes;
++ u32 setup_us, trans_us, total_us;
++
++ t = ktime_get();
++
++ setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time);
++ setup_us = (u32)ktime_to_us(setup_time);
++ if (setup_us == 0)
++ setup_us = 1;
++
++ trans_time = ktime_sub(t, rfbi.perf_start_time);
++ trans_us = (u32)ktime_to_us(trans_time);
++ if (trans_us == 0)
++ trans_us = 1;
++
++ total_us = setup_us + trans_us;
++
++ total_bytes = rfbi.perf_bytes;
++
++ DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, "
++ "%u kbytes/sec\n",
++ name,
++ setup_us,
++ trans_us,
++ total_us,
++ 1000*1000 / total_us,
++ total_bytes,
++ total_bytes * 1000 / total_us);
++}
++#else
++#define perf_mark_setup()
++#define perf_mark_start()
++#define perf_show(x)
++#endif
++
++void rfbi_transfer_area(u16 width, u16 height,
++ void (callback)(void *data), void *data)
++{
++ u32 l;
++
++ /*BUG_ON(callback == 0);*/
++ BUG_ON(rfbi.framedone_callback != NULL);
++
++ DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
++
++ dispc_set_lcd_size(width, height);
++
++ dispc_enable_lcd_out(1);
++
++ rfbi.framedone_callback = callback;
++ rfbi.framedone_callback_data = data;
++
++ rfbi_enable_clocks(1);
++
++ rfbi_write_reg(RFBI_PIXEL_CNT, width * height);
++
++ l = rfbi_read_reg(RFBI_CONTROL);
++ l = FLD_MOD(l, 1, 0, 0); /* enable */
++ if (!rfbi.te_enabled)
++ l = FLD_MOD(l, 1, 4, 4); /* ITE */
++
++ perf_mark_start();
++
++ rfbi_write_reg(RFBI_CONTROL, l);
++}
++
++static void framedone_callback(void *data, u32 mask)
++{
++ void (*callback)(void *data);
++
++ DSSDBG("FRAMEDONE\n");
++
++ perf_show("DISPC");
++
++ REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0);
++
++ rfbi_enable_clocks(0);
++
++ callback = rfbi.framedone_callback;
++ rfbi.framedone_callback = NULL;
++
++ /*callback(rfbi.framedone_callback_data);*/
++
++ atomic_set(&rfbi.cmd_pending, 0);
++
++ process_cmd_fifo();
++}
++
++#if 1 /* VERBOSE */
++static void rfbi_print_timings(void)
++{
++ u32 l;
++ u32 time;
++
++ l = rfbi_read_reg(RFBI_CONFIG(0));
++ time = 1000000000 / rfbi.l4_khz;
++ if (l & (1 << 4))
++ time *= 2;
++
++ DSSDBG("Tick time %u ps\n", time);
++ l = rfbi_read_reg(RFBI_ONOFF_TIME(0));
++ DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, "
++ "REONTIME %d, REOFFTIME %d\n",
++ l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f,
++ (l >> 20) & 0x0f, (l >> 24) & 0x3f);
++
++ l = rfbi_read_reg(RFBI_CYCLE_TIME(0));
++ DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, "
++ "ACCESSTIME %d\n",
++ (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f,
++ (l >> 22) & 0x3f);
++}
++#else
++static void rfbi_print_timings(void) {}
++#endif
++
++
++
++
++static u32 extif_clk_period;
++
++static inline unsigned long round_to_extif_ticks(unsigned long ps, int div)
++{
++ int bus_tick = extif_clk_period * div;
++ return (ps + bus_tick - 1) / bus_tick * bus_tick;
++}
++
++static int calc_reg_timing(struct rfbi_timings *t, int div)
++{
++ t->clk_div = div;
++
++ t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div);
++
++ t->we_on_time = round_to_extif_ticks(t->we_on_time, div);
++ t->we_off_time = round_to_extif_ticks(t->we_off_time, div);
++ t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div);
++
++ t->re_on_time = round_to_extif_ticks(t->re_on_time, div);
++ t->re_off_time = round_to_extif_ticks(t->re_off_time, div);
++ t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div);
++
++ t->access_time = round_to_extif_ticks(t->access_time, div);
++ t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div);
++ t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div);
++
++ DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n",
++ t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
++ DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n",
++ t->we_on_time, t->we_off_time, t->re_cycle_time,
++ t->we_cycle_time);
++ DSSDBG("[reg]rdaccess %d cspulse %d\n",
++ t->access_time, t->cs_pulse_width);
++
++ return rfbi_convert_timings(t);
++}
++
++static int calc_extif_timings(struct rfbi_timings *t)
++{
++ u32 max_clk_div;
++ int div;
++
++ rfbi_get_clk_info(&extif_clk_period, &max_clk_div);
++ for (div = 1; div <= max_clk_div; div++) {
++ if (calc_reg_timing(t, div) == 0)
++ break;
++ }
++
++ if (div <= max_clk_div)
++ return 0;
++
++ DSSERR("can't setup timings\n");
++ return -1;
++}
++
++
++void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t)
++{
++ int r;
++
++ if (!t->converted) {
++ r = calc_extif_timings(t);
++ if (r < 0)
++ DSSERR("Failed to calc timings\n");
++ }
++
++ BUG_ON(!t->converted);
++
++ rfbi_enable_clocks(1);
++ rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]);
++ rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]);
++
++ /* TIMEGRANULARITY */
++ REG_FLD_MOD(RFBI_CONFIG(rfbi_module),
++ (t->tim[2] ? 1 : 0), 4, 4);
++
++ rfbi_print_timings();
++ rfbi_enable_clocks(0);
++}
++
++static int ps_to_rfbi_ticks(int time, int div)
++{
++ unsigned long tick_ps;
++ int ret;
++
++ /* Calculate in picosecs to yield more exact results */
++ tick_ps = 1000000000 / (rfbi.l4_khz) * div;
++
++ ret = (time + tick_ps - 1) / tick_ps;
++
++ return ret;
++}
++
++#ifdef OMAP_RFBI_RATE_LIMIT
++unsigned long rfbi_get_max_tx_rate(void)
++{
++ unsigned long l4_rate, dss1_rate;
++ int min_l4_ticks = 0;
++ int i;
++
++ /* According to TI this can't be calculated so make the
++ * adjustments for a couple of known frequencies and warn for
++ * others.
++ */
++ static const struct {
++ unsigned long l4_clk; /* HZ */
++ unsigned long dss1_clk; /* HZ */
++ unsigned long min_l4_ticks;
++ } ftab[] = {
++ { 55, 132, 7, }, /* 7.86 MPix/s */
++ { 110, 110, 12, }, /* 9.16 MPix/s */
++ { 110, 132, 10, }, /* 11 Mpix/s */
++ { 120, 120, 10, }, /* 12 Mpix/s */
++ { 133, 133, 10, }, /* 13.3 Mpix/s */
++ };
++
++ l4_rate = rfbi.l4_khz / 1000;
++ dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000;
++
++ for (i = 0; i < ARRAY_SIZE(ftab); i++) {
++ /* Use a window instead of an exact match, to account
++ * for different DPLL multiplier / divider pairs.
++ */
++ if (abs(ftab[i].l4_clk - l4_rate) < 3 &&
++ abs(ftab[i].dss1_clk - dss1_rate) < 3) {
++ min_l4_ticks = ftab[i].min_l4_ticks;
++ break;
++ }
++ }
++ if (i == ARRAY_SIZE(ftab)) {
++ /* Can't be sure, return anyway the maximum not
++ * rate-limited. This might cause a problem only for the
++ * tearing synchronisation.
++ */
++ DSSERR("can't determine maximum RFBI transfer rate\n");
++ return rfbi.l4_khz * 1000;
++ }
++ return rfbi.l4_khz * 1000 / min_l4_ticks;
++}
++#else
++int rfbi_get_max_tx_rate(void)
++{
++ return rfbi.l4_khz * 1000;
++}
++#endif
++
++static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
++{
++ *clk_period = 1000000000 / rfbi.l4_khz;
++ *max_clk_div = 2;
++}
++
++static int rfbi_convert_timings(struct rfbi_timings *t)
++{
++ u32 l;
++ int reon, reoff, weon, weoff, cson, csoff, cs_pulse;
++ int actim, recyc, wecyc;
++ int div = t->clk_div;
++
++ if (div <= 0 || div > 2)
++ return -1;
++
++ /* Make sure that after conversion it still holds that:
++ * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff,
++ * csoff > cson, csoff >= max(weoff, reoff), actim > reon
++ */
++ weon = ps_to_rfbi_ticks(t->we_on_time, div);
++ weoff = ps_to_rfbi_ticks(t->we_off_time, div);
++ if (weoff <= weon)
++ weoff = weon + 1;
++ if (weon > 0x0f)
++ return -1;
++ if (weoff > 0x3f)
++ return -1;
++
++ reon = ps_to_rfbi_ticks(t->re_on_time, div);
++ reoff = ps_to_rfbi_ticks(t->re_off_time, div);
++ if (reoff <= reon)
++ reoff = reon + 1;
++ if (reon > 0x0f)
++ return -1;
++ if (reoff > 0x3f)
++ return -1;
++
++ cson = ps_to_rfbi_ticks(t->cs_on_time, div);
++ csoff = ps_to_rfbi_ticks(t->cs_off_time, div);
++ if (csoff <= cson)
++ csoff = cson + 1;
++ if (csoff < max(weoff, reoff))
++ csoff = max(weoff, reoff);
++ if (cson > 0x0f)
++ return -1;
++ if (csoff > 0x3f)
++ return -1;
++
++ l = cson;
++ l |= csoff << 4;
++ l |= weon << 10;
++ l |= weoff << 14;
++ l |= reon << 20;
++ l |= reoff << 24;
++
++ t->tim[0] = l;
++
++ actim = ps_to_rfbi_ticks(t->access_time, div);
++ if (actim <= reon)
++ actim = reon + 1;
++ if (actim > 0x3f)
++ return -1;
++
++ wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div);
++ if (wecyc < weoff)
++ wecyc = weoff;
++ if (wecyc > 0x3f)
++ return -1;
++
++ recyc = ps_to_rfbi_ticks(t->re_cycle_time, div);
++ if (recyc < reoff)
++ recyc = reoff;
++ if (recyc > 0x3f)
++ return -1;
++
++ cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div);
++ if (cs_pulse > 0x3f)
++ return -1;
++
++ l = wecyc;
++ l |= recyc << 6;
++ l |= cs_pulse << 12;
++ l |= actim << 22;
++
++ t->tim[1] = l;
++
++ t->tim[2] = div - 1;
++
++ t->converted = 1;
++
++ return 0;
++}
++
++/* xxx FIX module selection missing */
++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
++ unsigned hs_pulse_time, unsigned vs_pulse_time,
++ int hs_pol_inv, int vs_pol_inv, int extif_div)
++{
++ int hs, vs;
++ int min;
++ u32 l;
++
++ hs = ps_to_rfbi_ticks(hs_pulse_time, 1);
++ vs = ps_to_rfbi_ticks(vs_pulse_time, 1);
++ if (hs < 2)
++ return -EDOM;
++ if (mode == OMAP_DSS_RFBI_TE_MODE_2)
++ min = 2;
++ else /* OMAP_DSS_RFBI_TE_MODE_1 */
++ min = 4;
++ if (vs < min)
++ return -EDOM;
++ if (vs == hs)
++ return -EINVAL;
++ rfbi.te_mode = mode;
++ DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n",
++ mode, hs, vs, hs_pol_inv, vs_pol_inv);
++
++ rfbi_enable_clocks(1);
++ rfbi_write_reg(RFBI_HSYNC_WIDTH, hs);
++ rfbi_write_reg(RFBI_VSYNC_WIDTH, vs);
++
++ l = rfbi_read_reg(RFBI_CONFIG(0));
++ if (hs_pol_inv)
++ l &= ~(1 << 21);
++ else
++ l |= 1 << 21;
++ if (vs_pol_inv)
++ l &= ~(1 << 20);
++ else
++ l |= 1 << 20;
++ rfbi_enable_clocks(0);
++
++ return 0;
++}
++EXPORT_SYMBOL(omap_rfbi_setup_te);
++
++/* xxx FIX module selection missing */
++int omap_rfbi_enable_te(bool enable, unsigned line)
++{
++ u32 l;
++
++ DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode);
++ if (line > (1 << 11) - 1)
++ return -EINVAL;
++
++ rfbi_enable_clocks(1);
++ l = rfbi_read_reg(RFBI_CONFIG(0));
++ l &= ~(0x3 << 2);
++ if (enable) {
++ rfbi.te_enabled = 1;
++ l |= rfbi.te_mode << 2;
++ } else
++ rfbi.te_enabled = 0;
++ rfbi_write_reg(RFBI_CONFIG(0), l);
++ rfbi_write_reg(RFBI_LINE_NUMBER, line);
++ rfbi_enable_clocks(0);
++
++ return 0;
++}
++EXPORT_SYMBOL(omap_rfbi_enable_te);
++
++#if 0
++static void rfbi_enable_config(int enable1, int enable2)
++{
++ u32 l;
++ int cs = 0;
++
++ if (enable1)
++ cs |= 1<<0;
++ if (enable2)
++ cs |= 1<<1;
++
++ rfbi_enable_clocks(1);
++
++ l = rfbi_read_reg(RFBI_CONTROL);
++
++ l = FLD_MOD(l, cs, 3, 2);
++ l = FLD_MOD(l, 0, 1, 1);
++
++ rfbi_write_reg(RFBI_CONTROL, l);
++
++
++ l = rfbi_read_reg(RFBI_CONFIG(0));
++ l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */
++ /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */
++ /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */
++
++ l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */
++ l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */
++ l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */
++
++ l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0);
++ rfbi_write_reg(RFBI_CONFIG(0), l);
++
++ rfbi_enable_clocks(0);
++}
++#endif
++
++int rfbi_configure(int rfbi_module, int bpp, int lines)
++{
++ u32 l;
++ int cycle1 = 0, cycle2 = 0, cycle3 = 0;
++ enum omap_rfbi_cycleformat cycleformat;
++ enum omap_rfbi_datatype datatype;
++ enum omap_rfbi_parallelmode parallelmode;
++
++ switch (bpp) {
++ case 12:
++ datatype = OMAP_DSS_RFBI_DATATYPE_12;
++ break;
++ case 16:
++ datatype = OMAP_DSS_RFBI_DATATYPE_16;
++ break;
++ case 18:
++ datatype = OMAP_DSS_RFBI_DATATYPE_18;
++ break;
++ case 24:
++ datatype = OMAP_DSS_RFBI_DATATYPE_24;
++ break;
++ default:
++ BUG();
++ return 1;
++ }
++ rfbi.datatype = datatype;
++
++ switch (lines) {
++ case 8:
++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8;
++ break;
++ case 9:
++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9;
++ break;
++ case 12:
++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12;
++ break;
++ case 16:
++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16;
++ break;
++ default:
++ BUG();
++ return 1;
++ }
++ rfbi.parallelmode = parallelmode;
++
++ if ((bpp % lines) == 0) {
++ switch (bpp / lines) {
++ case 1:
++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1;
++ break;
++ case 2:
++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1;
++ break;
++ case 3:
++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1;
++ break;
++ default:
++ BUG();
++ return 1;
++ }
++ } else if ((2 * bpp % lines) == 0) {
++ if ((2 * bpp / lines) == 3)
++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2;
++ else {
++ BUG();
++ return 1;
++ }
++ } else {
++ BUG();
++ return 1;
++ }
++
++ switch (cycleformat) {
++ case OMAP_DSS_RFBI_CYCLEFORMAT_1_1:
++ cycle1 = lines;
++ break;
++
++ case OMAP_DSS_RFBI_CYCLEFORMAT_2_1:
++ cycle1 = lines;
++ cycle2 = lines;
++ break;
++
++ case OMAP_DSS_RFBI_CYCLEFORMAT_3_1:
++ cycle1 = lines;
++ cycle2 = lines;
++ cycle3 = lines;
++ break;
++
++ case OMAP_DSS_RFBI_CYCLEFORMAT_3_2:
++ cycle1 = lines;
++ cycle2 = (lines / 2) | ((lines / 2) << 16);
++ cycle3 = (lines << 16);
++ break;
++ }
++
++ rfbi_enable_clocks(1);
++
++ REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */
++
++ l = 0;
++ l |= FLD_VAL(parallelmode, 1, 0);
++ l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */
++ l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */
++ l |= FLD_VAL(datatype, 6, 5);
++ /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */
++ l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */
++ l |= FLD_VAL(cycleformat, 10, 9);
++ l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */
++ l |= FLD_VAL(0, 16, 16); /* A0POLARITY */
++ l |= FLD_VAL(0, 17, 17); /* REPOLARITY */
++ l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */
++ l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */
++ l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */
++ l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */
++ rfbi_write_reg(RFBI_CONFIG(rfbi_module), l);
++
++ rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1);
++ rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2);
++ rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3);
++
++
++ l = rfbi_read_reg(RFBI_CONTROL);
++ l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */
++ l = FLD_MOD(l, 0, 1, 1); /* clear bypass */
++ rfbi_write_reg(RFBI_CONTROL, l);
++
++
++ DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n",
++ bpp, lines, cycle1, cycle2, cycle3);
++
++ rfbi_enable_clocks(0);
++
++ return 0;
++}
++EXPORT_SYMBOL(rfbi_configure);
++
++static int rfbi_find_display(struct omap_dss_device *dssdev)
++{
++ if (dssdev == rfbi.dssdev[0])
++ return 0;
++
++ if (dssdev == rfbi.dssdev[1])
++ return 1;
++
++ BUG();
++ return -1;
++}
++
++
++static void signal_fifo_waiters(void)
++{
++ if (atomic_read(&rfbi.cmd_fifo_full) > 0) {
++ /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */
++ complete(&rfbi.cmd_done);
++ atomic_dec(&rfbi.cmd_fifo_full);
++ }
++}
++
++/* returns 1 for async op, and 0 for sync op */
++static int do_update(struct omap_dss_device *dssdev, struct update_region *upd)
++{
++ u16 x = upd->x;
++ u16 y = upd->y;
++ u16 w = upd->w;
++ u16 h = upd->h;
++
++ perf_mark_setup();
++
++ if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
++ /*dssdev->driver->enable_te(dssdev, 1); */
++ dss_setup_partial_planes(dssdev, &x, &y, &w, &h);
++ }
++
++#ifdef MEASURE_PERF
++ rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */
++#endif
++
++ dssdev->driver->setup_update(dssdev, x, y, w, h);
++
++ if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
++ rfbi_transfer_area(w, h, NULL, NULL);
++ return 1;
++ } else {
++ struct omap_overlay *ovl;
++ void __iomem *addr;
++ int scr_width;
++
++ ovl = dssdev->manager->overlays[0];
++ scr_width = ovl->info.screen_width;
++ addr = ovl->info.vaddr;
++
++ omap_rfbi_write_pixels(addr, scr_width, x, y, w, h);
++
++ perf_show("L4");
++
++ return 0;
++ }
++}
++
++static void process_cmd_fifo(void)
++{
++ int len;
++ struct update_param p;
++ struct omap_dss_device *dssdev;
++ unsigned long flags;
++
++ if (atomic_inc_return(&rfbi.cmd_pending) != 1)
++ return;
++
++ while (true) {
++ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
++
++ len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p,
++ sizeof(struct update_param));
++ if (len == 0) {
++ DSSDBG("nothing more in fifo\n");
++ atomic_set(&rfbi.cmd_pending, 0);
++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
++ break;
++ }
++
++ /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/
++
++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
++
++ BUG_ON(len != sizeof(struct update_param));
++ BUG_ON(p.rfbi_module > 1);
++
++ dssdev = rfbi.dssdev[p.rfbi_module];
++
++ if (p.cmd == RFBI_CMD_UPDATE) {
++ if (do_update(dssdev, &p.par.r))
++ break; /* async op */
++ } else if (p.cmd == RFBI_CMD_SYNC) {
++ DSSDBG("Signaling SYNC done!\n");
++ complete(p.par.sync);
++ } else
++ BUG();
++ }
++
++ signal_fifo_waiters();
++}
++
++static void rfbi_push_cmd(struct update_param *p)
++{
++ int ret;
++
++ while (1) {
++ unsigned long flags;
++ int available;
++
++ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
++ available = RFBI_CMD_FIFO_LEN_BYTES -
++ __kfifo_len(rfbi.cmd_fifo);
++
++/* DSSDBG("%d bytes left in fifo\n", available); */
++ if (available < sizeof(struct update_param)) {
++ DSSDBG("Going to wait because FIFO FULL..\n");
++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
++ atomic_inc(&rfbi.cmd_fifo_full);
++ wait_for_completion(&rfbi.cmd_done);
++ /*DSSDBG("Woke up because fifo not full anymore\n");*/
++ continue;
++ }
++
++ ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p,
++ sizeof(struct update_param));
++/* DSSDBG("pushed %d bytes\n", ret);*/
++
++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
++
++ BUG_ON(ret != sizeof(struct update_param));
++
++ break;
++ }
++}
++
++static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h)
++{
++ struct update_param p;
++
++ p.rfbi_module = rfbi_module;
++ p.cmd = RFBI_CMD_UPDATE;
++
++ p.par.r.x = x;
++ p.par.r.y = y;
++ p.par.r.w = w;
++ p.par.r.h = h;
++
++ DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h);
++
++ rfbi_push_cmd(&p);
++
++ process_cmd_fifo();
++}
++
++static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp)
++{
++ struct update_param p;
++
++ p.rfbi_module = rfbi_module;
++ p.cmd = RFBI_CMD_SYNC;
++ p.par.sync = sync_comp;
++
++ rfbi_push_cmd(&p);
++
++ DSSDBG("RFBI sync pushed to cmd fifo\n");
++
++ process_cmd_fifo();
++}
++
++void rfbi_dump_regs(struct seq_file *s)
++{
++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
++
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ DUMPREG(RFBI_REVISION);
++ DUMPREG(RFBI_SYSCONFIG);
++ DUMPREG(RFBI_SYSSTATUS);
++ DUMPREG(RFBI_CONTROL);
++ DUMPREG(RFBI_PIXEL_CNT);
++ DUMPREG(RFBI_LINE_NUMBER);
++ DUMPREG(RFBI_CMD);
++ DUMPREG(RFBI_PARAM);
++ DUMPREG(RFBI_DATA);
++ DUMPREG(RFBI_READ);
++ DUMPREG(RFBI_STATUS);
++
++ DUMPREG(RFBI_CONFIG(0));
++ DUMPREG(RFBI_ONOFF_TIME(0));
++ DUMPREG(RFBI_CYCLE_TIME(0));
++ DUMPREG(RFBI_DATA_CYCLE1(0));
++ DUMPREG(RFBI_DATA_CYCLE2(0));
++ DUMPREG(RFBI_DATA_CYCLE3(0));
++
++ DUMPREG(RFBI_CONFIG(1));
++ DUMPREG(RFBI_ONOFF_TIME(1));
++ DUMPREG(RFBI_CYCLE_TIME(1));
++ DUMPREG(RFBI_DATA_CYCLE1(1));
++ DUMPREG(RFBI_DATA_CYCLE2(1));
++ DUMPREG(RFBI_DATA_CYCLE3(1));
++
++ DUMPREG(RFBI_VSYNC_WIDTH);
++ DUMPREG(RFBI_HSYNC_WIDTH);
++
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++#undef DUMPREG
++}
++
++int rfbi_init(void)
++{
++ u32 rev;
++ u32 l;
++
++ spin_lock_init(&rfbi.cmd_lock);
++ rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL,
++ &rfbi.cmd_lock);
++ if (IS_ERR(rfbi.cmd_fifo))
++ return -ENOMEM;
++
++ init_completion(&rfbi.cmd_done);
++ atomic_set(&rfbi.cmd_fifo_full, 0);
++ atomic_set(&rfbi.cmd_pending, 0);
++
++ rfbi.base = ioremap(RFBI_BASE, SZ_256);
++ if (!rfbi.base) {
++ DSSERR("can't ioremap RFBI\n");
++ return -ENOMEM;
++ }
++
++ rfbi_enable_clocks(1);
++
++ msleep(10);
++
++ rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
++
++ /* Enable autoidle and smart-idle */
++ l = rfbi_read_reg(RFBI_SYSCONFIG);
++ l |= (1 << 0) | (2 << 3);
++ rfbi_write_reg(RFBI_SYSCONFIG, l);
++
++ rev = rfbi_read_reg(RFBI_REVISION);
++ printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
++
++ rfbi_enable_clocks(0);
++
++ return 0;
++}
++
++void rfbi_exit(void)
++{
++ DSSDBG("rfbi_exit\n");
++
++ kfifo_free(rfbi.cmd_fifo);
++
++ iounmap(rfbi.base);
++}
++
++/* struct omap_display support */
++static int rfbi_display_update(struct omap_dss_device *dssdev,
++ u16 x, u16 y, u16 w, u16 h)
++{
++ int rfbi_module;
++
++ if (w == 0 || h == 0)
++ return 0;
++
++ rfbi_module = rfbi_find_display(dssdev);
++
++ rfbi_push_update(rfbi_module, x, y, w, h);
++
++ return 0;
++}
++
++static int rfbi_display_sync(struct omap_dss_device *dssdev)
++{
++ struct completion sync_comp;
++ int rfbi_module;
++
++ rfbi_module = rfbi_find_display(dssdev);
++
++ init_completion(&sync_comp);
++ rfbi_push_sync(rfbi_module, &sync_comp);
++ DSSDBG("Waiting for SYNC to happen...\n");
++ wait_for_completion(&sync_comp);
++ DSSDBG("Released from SYNC\n");
++ return 0;
++}
++
++static int rfbi_display_enable_te(struct omap_dss_device *dssdev, bool enable)
++{
++ dssdev->driver->enable_te(dssdev, enable);
++ return 0;
++}
++
++static int rfbi_display_enable(struct omap_dss_device *dssdev)
++{
++ int r;
++
++ r = omap_dss_start_device(dssdev);
++ if (r) {
++ DSSERR("failed to start device\n");
++ goto err0;
++ }
++
++ r = omap_dispc_register_isr(framedone_callback, NULL,
++ DISPC_IRQ_FRAMEDONE);
++ if (r) {
++ DSSERR("can't get FRAMEDONE irq\n");
++ goto err1;
++ }
++
++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
++
++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI);
++
++ dispc_set_tft_data_lines(dssdev->ctrl.pixel_size);
++
++ rfbi_configure(dssdev->phy.rfbi.channel,
++ dssdev->ctrl.pixel_size,
++ dssdev->phy.rfbi.data_lines);
++
++ rfbi_set_timings(dssdev->phy.rfbi.channel,
++ &dssdev->ctrl.rfbi_timings);
++
++
++ if (dssdev->driver->enable) {
++ r = dssdev->driver->enable(dssdev);
++ if (r)
++ goto err2;
++ }
++
++ return 0;
++err2:
++ omap_dispc_unregister_isr(framedone_callback, NULL,
++ DISPC_IRQ_FRAMEDONE);
++err1:
++ omap_dss_stop_device(dssdev);
++err0:
++ return r;
++}
++
++static void rfbi_display_disable(struct omap_dss_device *dssdev)
++{
++ dssdev->driver->disable(dssdev);
++ omap_dispc_unregister_isr(framedone_callback, NULL,
++ DISPC_IRQ_FRAMEDONE);
++ omap_dss_stop_device(dssdev);
++}
++
++int rfbi_init_display(struct omap_dss_device *dssdev)
++{
++ dssdev->enable = rfbi_display_enable;
++ dssdev->disable = rfbi_display_disable;
++ dssdev->update = rfbi_display_update;
++ dssdev->sync = rfbi_display_sync;
++ dssdev->enable_te = rfbi_display_enable_te;
++
++ rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev;
++
++ dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
++
++ return 0;
++}
+diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
+new file mode 100644
+index 0000000..a9c727e
+--- /dev/null
++++ b/drivers/video/omap2/dss/sdi.c
+@@ -0,0 +1,261 @@
++/*
++ * linux/drivers/video/omap2/dss/sdi.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "SDI"
++
++#include <linux/kernel.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++
++#include <mach/board.h>
++#include <mach/display.h>
++#include "dss.h"
++
++static struct {
++ bool skip_init;
++ bool update_enabled;
++} sdi;
++
++static void sdi_basic_init(void)
++{
++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS);
++
++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
++ dispc_set_tft_data_lines(24);
++ dispc_lcd_enable_signal_polarity(1);
++}
++
++static int sdi_display_enable(struct omap_dss_device *dssdev)
++{
++ struct omap_video_timings *t = &dssdev->panel.timings;
++ struct dispc_clock_info cinfo;
++ u16 lck_div, pck_div;
++ unsigned long fck;
++ unsigned long pck;
++ int r;
++
++ r = omap_dss_start_device(dssdev);
++ if (r) {
++ DSSERR("failed to start device\n");
++ goto err0;
++ }
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
++ DSSERR("dssdev already enabled\n");
++ r = -EINVAL;
++ goto err1;
++ }
++
++ /* In case of skip_init sdi_init has already enabled the clocks */
++ if (!sdi.skip_init)
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ sdi_basic_init();
++
++ /* 15.5.9.1.2 */
++ dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF;
++
++ dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi,
++ dssdev->panel.acb);
++
++ if (!sdi.skip_init)
++ r = dispc_calc_clock_div(1, t->pixel_clock * 1000,
++ &cinfo);
++ else
++ r = dispc_get_clock_div(&cinfo);
++
++ if (r)
++ goto err2;
++
++ fck = cinfo.fck;
++ lck_div = cinfo.lck_div;
++ pck_div = cinfo.pck_div;
++
++ pck = fck / lck_div / pck_div / 1000;
++
++ if (pck != t->pixel_clock) {
++ DSSWARN("Could not find exact pixel clock. Requested %d kHz, "
++ "got %lu kHz\n",
++ t->pixel_clock, pck);
++
++ t->pixel_clock = pck;
++ }
++
++
++ dispc_set_lcd_timings(t);
++
++ r = dispc_set_clock_div(&cinfo);
++ if (r)
++ goto err2;
++
++ if (!sdi.skip_init) {
++ dss_sdi_init(dssdev->phy.sdi.datapairs);
++ dss_sdi_enable();
++ mdelay(2);
++ }
++
++ dispc_enable_lcd_out(1);
++
++ if (dssdev->driver->enable) {
++ r = dssdev->driver->enable(dssdev);
++ if (r)
++ goto err3;
++ }
++
++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++ sdi.skip_init = 0;
++
++ return 0;
++err3:
++ dispc_enable_lcd_out(0);
++err2:
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++err1:
++ omap_dss_stop_device(dssdev);
++err0:
++ return r;
++}
++
++static int sdi_display_resume(struct omap_dss_device *dssdev);
++
++static void sdi_display_disable(struct omap_dss_device *dssdev)
++{
++ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
++ return;
++
++ if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
++ sdi_display_resume(dssdev);
++
++ if (dssdev->driver->disable)
++ dssdev->driver->disable(dssdev);
++
++ dispc_enable_lcd_out(0);
++
++ dss_sdi_disable();
++
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
++
++ omap_dss_stop_device(dssdev);
++}
++
++static int sdi_display_suspend(struct omap_dss_device *dssdev)
++{
++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
++ return -EINVAL;
++
++ if (dssdev->driver->suspend)
++ dssdev->driver->suspend(dssdev);
++
++ dispc_enable_lcd_out(0);
++
++ dss_sdi_disable();
++
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
++
++ return 0;
++}
++
++static int sdi_display_resume(struct omap_dss_device *dssdev)
++{
++ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
++ return -EINVAL;
++
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++ dss_sdi_enable();
++ mdelay(2);
++
++ dispc_enable_lcd_out(1);
++
++ if (dssdev->driver->resume)
++ dssdev->driver->resume(dssdev);
++
++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++ return 0;
++}
++
++static int sdi_display_set_update_mode(struct omap_dss_device *dssdev,
++ enum omap_dss_update_mode mode)
++{
++ if (mode == OMAP_DSS_UPDATE_MANUAL)
++ return -EINVAL;
++
++ if (mode == OMAP_DSS_UPDATE_DISABLED) {
++ dispc_enable_lcd_out(0);
++ sdi.update_enabled = 0;
++ } else {
++ dispc_enable_lcd_out(1);
++ sdi.update_enabled = 1;
++ }
++
++ return 0;
++}
++
++static enum omap_dss_update_mode sdi_display_get_update_mode(
++ struct omap_dss_device *dssdev)
++{
++ return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO :
++ OMAP_DSS_UPDATE_DISABLED;
++}
++
++static void sdi_get_timings(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings)
++{
++ *timings = dssdev->panel.timings;
++}
++
++int sdi_init_display(struct omap_dss_device *dssdev)
++{
++ DSSDBG("SDI init\n");
++
++ dssdev->enable = sdi_display_enable;
++ dssdev->disable = sdi_display_disable;
++ dssdev->suspend = sdi_display_suspend;
++ dssdev->resume = sdi_display_resume;
++ dssdev->set_update_mode = sdi_display_set_update_mode;
++ dssdev->get_update_mode = sdi_display_get_update_mode;
++ dssdev->get_timings = sdi_get_timings;
++
++ return 0;
++}
++
++int sdi_init(bool skip_init)
++{
++ /* we store this for first display enable, then clear it */
++ sdi.skip_init = skip_init;
++
++ /*
++ * Enable clocks already here, otherwise there would be a toggle
++ * of them until sdi_display_enable is called.
++ */
++ if (skip_init)
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++ return 0;
++}
++
++void sdi_exit(void)
++{
++}
+diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
+new file mode 100644
+index 0000000..cf7827e
+--- /dev/null
++++ b/drivers/video/omap2/dss/venc.c
+@@ -0,0 +1,797 @@
++/*
++ * linux/drivers/video/omap2/dss/venc.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * VENC settings from TI's DSS driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "VENC"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/mutex.h>
++#include <linux/completion.h>
++#include <linux/delay.h>
++#include <linux/string.h>
++#include <linux/seq_file.h>
++#include <linux/platform_device.h>
++#include <linux/regulator/consumer.h>
++
++#include <mach/display.h>
++#include <mach/cpu.h>
++
++#include "dss.h"
++
++#define VENC_BASE 0x48050C00
++
++/* Venc registers */
++#define VENC_REV_ID 0x00
++#define VENC_STATUS 0x04
++#define VENC_F_CONTROL 0x08
++#define VENC_VIDOUT_CTRL 0x10
++#define VENC_SYNC_CTRL 0x14
++#define VENC_LLEN 0x1C
++#define VENC_FLENS 0x20
++#define VENC_HFLTR_CTRL 0x24
++#define VENC_CC_CARR_WSS_CARR 0x28
++#define VENC_C_PHASE 0x2C
++#define VENC_GAIN_U 0x30
++#define VENC_GAIN_V 0x34
++#define VENC_GAIN_Y 0x38
++#define VENC_BLACK_LEVEL 0x3C
++#define VENC_BLANK_LEVEL 0x40
++#define VENC_X_COLOR 0x44
++#define VENC_M_CONTROL 0x48
++#define VENC_BSTAMP_WSS_DATA 0x4C
++#define VENC_S_CARR 0x50
++#define VENC_LINE21 0x54
++#define VENC_LN_SEL 0x58
++#define VENC_L21__WC_CTL 0x5C
++#define VENC_HTRIGGER_VTRIGGER 0x60
++#define VENC_SAVID__EAVID 0x64
++#define VENC_FLEN__FAL 0x68
++#define VENC_LAL__PHASE_RESET 0x6C
++#define VENC_HS_INT_START_STOP_X 0x70
++#define VENC_HS_EXT_START_STOP_X 0x74
++#define VENC_VS_INT_START_X 0x78
++#define VENC_VS_INT_STOP_X__VS_INT_START_Y 0x7C
++#define VENC_VS_INT_STOP_Y__VS_EXT_START_X 0x80
++#define VENC_VS_EXT_STOP_X__VS_EXT_START_Y 0x84
++#define VENC_VS_EXT_STOP_Y 0x88
++#define VENC_AVID_START_STOP_X 0x90
++#define VENC_AVID_START_STOP_Y 0x94
++#define VENC_FID_INT_START_X__FID_INT_START_Y 0xA0
++#define VENC_FID_INT_OFFSET_Y__FID_EXT_START_X 0xA4
++#define VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y 0xA8
++#define VENC_TVDETGP_INT_START_STOP_X 0xB0
++#define VENC_TVDETGP_INT_START_STOP_Y 0xB4
++#define VENC_GEN_CTRL 0xB8
++#define VENC_OUTPUT_CONTROL 0xC4
++#define VENC_OUTPUT_TEST 0xC8
++#define VENC_DAC_B__DAC_C 0xC8
++
++struct venc_config {
++ u32 f_control;
++ u32 vidout_ctrl;
++ u32 sync_ctrl;
++ u32 llen;
++ u32 flens;
++ u32 hfltr_ctrl;
++ u32 cc_carr_wss_carr;
++ u32 c_phase;
++ u32 gain_u;
++ u32 gain_v;
++ u32 gain_y;
++ u32 black_level;
++ u32 blank_level;
++ u32 x_color;
++ u32 m_control;
++ u32 bstamp_wss_data;
++ u32 s_carr;
++ u32 line21;
++ u32 ln_sel;
++ u32 l21__wc_ctl;
++ u32 htrigger_vtrigger;
++ u32 savid__eavid;
++ u32 flen__fal;
++ u32 lal__phase_reset;
++ u32 hs_int_start_stop_x;
++ u32 hs_ext_start_stop_x;
++ u32 vs_int_start_x;
++ u32 vs_int_stop_x__vs_int_start_y;
++ u32 vs_int_stop_y__vs_ext_start_x;
++ u32 vs_ext_stop_x__vs_ext_start_y;
++ u32 vs_ext_stop_y;
++ u32 avid_start_stop_x;
++ u32 avid_start_stop_y;
++ u32 fid_int_start_x__fid_int_start_y;
++ u32 fid_int_offset_y__fid_ext_start_x;
++ u32 fid_ext_start_y__fid_ext_offset_y;
++ u32 tvdetgp_int_start_stop_x;
++ u32 tvdetgp_int_start_stop_y;
++ u32 gen_ctrl;
++};
++
++/* from TRM */
++static const struct venc_config venc_config_pal_trm = {
++ .f_control = 0,
++ .vidout_ctrl = 1,
++ .sync_ctrl = 0x40,
++ .llen = 0x35F, /* 863 */
++ .flens = 0x270, /* 624 */
++ .hfltr_ctrl = 0,
++ .cc_carr_wss_carr = 0x2F7225ED,
++ .c_phase = 0,
++ .gain_u = 0x111,
++ .gain_v = 0x181,
++ .gain_y = 0x140,
++ .black_level = 0x3B,
++ .blank_level = 0x3B,
++ .x_color = 0x7,
++ .m_control = 0x2,
++ .bstamp_wss_data = 0x3F,
++ .s_carr = 0x2A098ACB,
++ .line21 = 0,
++ .ln_sel = 0x01290015,
++ .l21__wc_ctl = 0x0000F603,
++ .htrigger_vtrigger = 0,
++
++ .savid__eavid = 0x06A70108,
++ .flen__fal = 0x00180270,
++ .lal__phase_reset = 0x00040135,
++ .hs_int_start_stop_x = 0x00880358,
++ .hs_ext_start_stop_x = 0x000F035F,
++ .vs_int_start_x = 0x01A70000,
++ .vs_int_stop_x__vs_int_start_y = 0x000001A7,
++ .vs_int_stop_y__vs_ext_start_x = 0x01AF0000,
++ .vs_ext_stop_x__vs_ext_start_y = 0x000101AF,
++ .vs_ext_stop_y = 0x00000025,
++ .avid_start_stop_x = 0x03530083,
++ .avid_start_stop_y = 0x026C002E,
++ .fid_int_start_x__fid_int_start_y = 0x0001008A,
++ .fid_int_offset_y__fid_ext_start_x = 0x002E0138,
++ .fid_ext_start_y__fid_ext_offset_y = 0x01380001,
++
++ .tvdetgp_int_start_stop_x = 0x00140001,
++ .tvdetgp_int_start_stop_y = 0x00010001,
++ .gen_ctrl = 0x00FF0000,
++};
++
++/* from TRM */
++static const struct venc_config venc_config_ntsc_trm = {
++ .f_control = 0,
++ .vidout_ctrl = 1,
++ .sync_ctrl = 0x8040,
++ .llen = 0x359,
++ .flens = 0x20C,
++ .hfltr_ctrl = 0,
++ .cc_carr_wss_carr = 0x043F2631,
++ .c_phase = 0,
++ .gain_u = 0x102,
++ .gain_v = 0x16C,
++ .gain_y = 0x12F,
++ .black_level = 0x43,
++ .blank_level = 0x38,
++ .x_color = 0x7,
++ .m_control = 0x1,
++ .bstamp_wss_data = 0x38,
++ .s_carr = 0x21F07C1F,
++ .line21 = 0,
++ .ln_sel = 0x01310011,
++ .l21__wc_ctl = 0x0000F003,
++ .htrigger_vtrigger = 0,
++
++ .savid__eavid = 0x069300F4,
++ .flen__fal = 0x0016020C,
++ .lal__phase_reset = 0x00060107,
++ .hs_int_start_stop_x = 0x008E0350,
++ .hs_ext_start_stop_x = 0x000F0359,
++ .vs_int_start_x = 0x01A00000,
++ .vs_int_stop_x__vs_int_start_y = 0x020701A0,
++ .vs_int_stop_y__vs_ext_start_x = 0x01AC0024,
++ .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC,
++ .vs_ext_stop_y = 0x00000006,
++ .avid_start_stop_x = 0x03480078,
++ .avid_start_stop_y = 0x02060024,
++ .fid_int_start_x__fid_int_start_y = 0x0001008A,
++ .fid_int_offset_y__fid_ext_start_x = 0x01AC0106,
++ .fid_ext_start_y__fid_ext_offset_y = 0x01060006,
++
++ .tvdetgp_int_start_stop_x = 0x00140001,
++ .tvdetgp_int_start_stop_y = 0x00010001,
++ .gen_ctrl = 0x00F90000,
++};
++
++static const struct venc_config venc_config_pal_bdghi = {
++ .f_control = 0,
++ .vidout_ctrl = 0,
++ .sync_ctrl = 0,
++ .hfltr_ctrl = 0,
++ .x_color = 0,
++ .line21 = 0,
++ .ln_sel = 21,
++ .htrigger_vtrigger = 0,
++ .tvdetgp_int_start_stop_x = 0x00140001,
++ .tvdetgp_int_start_stop_y = 0x00010001,
++ .gen_ctrl = 0x00FB0000,
++
++ .llen = 864-1,
++ .flens = 625-1,
++ .cc_carr_wss_carr = 0x2F7625ED,
++ .c_phase = 0xDF,
++ .gain_u = 0x111,
++ .gain_v = 0x181,
++ .gain_y = 0x140,
++ .black_level = 0x3e,
++ .blank_level = 0x3e,
++ .m_control = 0<<2 | 1<<1,
++ .bstamp_wss_data = 0x42,
++ .s_carr = 0x2a098acb,
++ .l21__wc_ctl = 0<<13 | 0x16<<8 | 0<<0,
++ .savid__eavid = 0x06A70108,
++ .flen__fal = 23<<16 | 624<<0,
++ .lal__phase_reset = 2<<17 | 310<<0,
++ .hs_int_start_stop_x = 0x00920358,
++ .hs_ext_start_stop_x = 0x000F035F,
++ .vs_int_start_x = 0x1a7<<16,
++ .vs_int_stop_x__vs_int_start_y = 0x000601A7,
++ .vs_int_stop_y__vs_ext_start_x = 0x01AF0036,
++ .vs_ext_stop_x__vs_ext_start_y = 0x27101af,
++ .vs_ext_stop_y = 0x05,
++ .avid_start_stop_x = 0x03530082,
++ .avid_start_stop_y = 0x0270002E,
++ .fid_int_start_x__fid_int_start_y = 0x0005008A,
++ .fid_int_offset_y__fid_ext_start_x = 0x002E0138,
++ .fid_ext_start_y__fid_ext_offset_y = 0x01380005,
++};
++
++const struct omap_video_timings omap_dss_pal_timings = {
++ .x_res = 720,
++ .y_res = 574,
++ .pixel_clock = 13500,
++ .hsw = 64,
++ .hfp = 12,
++ .hbp = 68,
++ .vsw = 5,
++ .vfp = 5,
++ .vbp = 41,
++};
++EXPORT_SYMBOL(omap_dss_pal_timings);
++
++const struct omap_video_timings omap_dss_ntsc_timings = {
++ .x_res = 720,
++ .y_res = 482,
++ .pixel_clock = 13500,
++ .hsw = 64,
++ .hfp = 16,
++ .hbp = 58,
++ .vsw = 6,
++ .vfp = 6,
++ .vbp = 31,
++};
++EXPORT_SYMBOL(omap_dss_ntsc_timings);
++
++static struct {
++ void __iomem *base;
++ struct mutex venc_lock;
++ u32 wss_data;
++ struct regulator *vdda_dac_reg;
++} venc;
++
++static inline void venc_write_reg(int idx, u32 val)
++{
++ __raw_writel(val, venc.base + idx);
++}
++
++static inline u32 venc_read_reg(int idx)
++{
++ u32 l = __raw_readl(venc.base + idx);
++ return l;
++}
++
++static void venc_write_config(const struct venc_config *config)
++{
++ DSSDBG("write venc conf\n");
++
++ venc_write_reg(VENC_LLEN, config->llen);
++ venc_write_reg(VENC_FLENS, config->flens);
++ venc_write_reg(VENC_CC_CARR_WSS_CARR, config->cc_carr_wss_carr);
++ venc_write_reg(VENC_C_PHASE, config->c_phase);
++ venc_write_reg(VENC_GAIN_U, config->gain_u);
++ venc_write_reg(VENC_GAIN_V, config->gain_v);
++ venc_write_reg(VENC_GAIN_Y, config->gain_y);
++ venc_write_reg(VENC_BLACK_LEVEL, config->black_level);
++ venc_write_reg(VENC_BLANK_LEVEL, config->blank_level);
++ venc_write_reg(VENC_M_CONTROL, config->m_control);
++ venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data |
++ venc.wss_data);
++ venc_write_reg(VENC_S_CARR, config->s_carr);
++ venc_write_reg(VENC_L21__WC_CTL, config->l21__wc_ctl);
++ venc_write_reg(VENC_SAVID__EAVID, config->savid__eavid);
++ venc_write_reg(VENC_FLEN__FAL, config->flen__fal);
++ venc_write_reg(VENC_LAL__PHASE_RESET, config->lal__phase_reset);
++ venc_write_reg(VENC_HS_INT_START_STOP_X, config->hs_int_start_stop_x);
++ venc_write_reg(VENC_HS_EXT_START_STOP_X, config->hs_ext_start_stop_x);
++ venc_write_reg(VENC_VS_INT_START_X, config->vs_int_start_x);
++ venc_write_reg(VENC_VS_INT_STOP_X__VS_INT_START_Y,
++ config->vs_int_stop_x__vs_int_start_y);
++ venc_write_reg(VENC_VS_INT_STOP_Y__VS_EXT_START_X,
++ config->vs_int_stop_y__vs_ext_start_x);
++ venc_write_reg(VENC_VS_EXT_STOP_X__VS_EXT_START_Y,
++ config->vs_ext_stop_x__vs_ext_start_y);
++ venc_write_reg(VENC_VS_EXT_STOP_Y, config->vs_ext_stop_y);
++ venc_write_reg(VENC_AVID_START_STOP_X, config->avid_start_stop_x);
++ venc_write_reg(VENC_AVID_START_STOP_Y, config->avid_start_stop_y);
++ venc_write_reg(VENC_FID_INT_START_X__FID_INT_START_Y,
++ config->fid_int_start_x__fid_int_start_y);
++ venc_write_reg(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X,
++ config->fid_int_offset_y__fid_ext_start_x);
++ venc_write_reg(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y,
++ config->fid_ext_start_y__fid_ext_offset_y);
++
++ venc_write_reg(VENC_DAC_B__DAC_C, venc_read_reg(VENC_DAC_B__DAC_C));
++ venc_write_reg(VENC_VIDOUT_CTRL, config->vidout_ctrl);
++ venc_write_reg(VENC_HFLTR_CTRL, config->hfltr_ctrl);
++ venc_write_reg(VENC_X_COLOR, config->x_color);
++ venc_write_reg(VENC_LINE21, config->line21);
++ venc_write_reg(VENC_LN_SEL, config->ln_sel);
++ venc_write_reg(VENC_HTRIGGER_VTRIGGER, config->htrigger_vtrigger);
++ venc_write_reg(VENC_TVDETGP_INT_START_STOP_X,
++ config->tvdetgp_int_start_stop_x);
++ venc_write_reg(VENC_TVDETGP_INT_START_STOP_Y,
++ config->tvdetgp_int_start_stop_y);
++ venc_write_reg(VENC_GEN_CTRL, config->gen_ctrl);
++ venc_write_reg(VENC_F_CONTROL, config->f_control);
++ venc_write_reg(VENC_SYNC_CTRL, config->sync_ctrl);
++}
++
++static void venc_reset(void)
++{
++ int t = 1000;
++
++ venc_write_reg(VENC_F_CONTROL, 1<<8);
++ while (venc_read_reg(VENC_F_CONTROL) & (1<<8)) {
++ if (--t == 0) {
++ DSSERR("Failed to reset venc\n");
++ return;
++ }
++ }
++
++ /* the magical sleep that makes things work */
++ msleep(20);
++}
++
++static void venc_enable_clocks(int enable)
++{
++ if (enable)
++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M |
++ DSS_CLK_96M);
++ else
++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M |
++ DSS_CLK_96M);
++}
++
++static const struct venc_config *venc_timings_to_config(
++ struct omap_video_timings *timings)
++{
++ if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0)
++ return &venc_config_pal_trm;
++
++ if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0)
++ return &venc_config_ntsc_trm;
++
++ BUG();
++}
++
++
++
++
++
++/* driver */
++static int venc_panel_probe(struct omap_dss_device *dssdev)
++{
++ dssdev->panel.timings = omap_dss_pal_timings;
++
++ return 0;
++}
++
++static void venc_panel_remove(struct omap_dss_device *dssdev)
++{
++}
++
++static int venc_panel_enable(struct omap_dss_device *dssdev)
++{
++ int r = 0;
++
++ /* wait couple of vsyncs until enabling the LCD */
++ msleep(50);
++
++ if (dssdev->platform_enable)
++ r = dssdev->platform_enable(dssdev);
++
++ return r;
++}
++
++static void venc_panel_disable(struct omap_dss_device *dssdev)
++{
++ if (dssdev->platform_disable)
++ dssdev->platform_disable(dssdev);
++
++ /* wait at least 5 vsyncs after disabling the LCD */
++
++ msleep(100);
++}
++
++static int venc_panel_suspend(struct omap_dss_device *dssdev)
++{
++ venc_panel_disable(dssdev);
++ return 0;
++}
++
++static int venc_panel_resume(struct omap_dss_device *dssdev)
++{
++ return venc_panel_enable(dssdev);
++}
++
++static struct omap_dss_driver venc_driver = {
++ .probe = venc_panel_probe,
++ .remove = venc_panel_remove,
++
++ .enable = venc_panel_enable,
++ .disable = venc_panel_disable,
++ .suspend = venc_panel_suspend,
++ .resume = venc_panel_resume,
++
++ .driver = {
++ .name = "venc",
++ .owner = THIS_MODULE,
++ },
++};
++/* driver end */
++
++
++
++int venc_init(struct platform_device *pdev)
++{
++ u8 rev_id;
++
++ mutex_init(&venc.venc_lock);
++
++ venc.wss_data = 0;
++
++ venc.base = ioremap(VENC_BASE, SZ_1K);
++ if (!venc.base) {
++ DSSERR("can't ioremap VENC\n");
++ return -ENOMEM;
++ }
++
++ venc.vdda_dac_reg = regulator_get(&pdev->dev, "vdda_dac");
++ if (IS_ERR(venc.vdda_dac_reg)) {
++ iounmap(venc.base);
++ DSSERR("can't get VDDA_DAC regulator\n");
++ return PTR_ERR(venc.vdda_dac_reg);
++ }
++
++ venc_enable_clocks(1);
++
++ rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
++ printk(KERN_INFO "OMAP VENC rev %d\n", rev_id);
++
++ venc_enable_clocks(0);
++
++ return omap_dss_register_driver(&venc_driver);
++}
++
++void venc_exit(void)
++{
++ omap_dss_unregister_driver(&venc_driver);
++
++ regulator_put(venc.vdda_dac_reg);
++
++ iounmap(venc.base);
++}
++
++static void venc_power_on(struct omap_dss_device *dssdev)
++{
++ u32 l;
++
++ venc_enable_clocks(1);
++
++ venc_reset();
++ venc_write_config(venc_timings_to_config(&dssdev->panel.timings));
++
++ dss_set_venc_output(dssdev->phy.venc.type);
++ dss_set_dac_pwrdn_bgz(1);
++
++ l = 0;
++
++ if (dssdev->phy.venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE)
++ l |= 1 << 1;
++ else /* S-Video */
++ l |= (1 << 0) | (1 << 2);
++
++ if (dssdev->phy.venc.invert_polarity == false)
++ l |= 1 << 3;
++
++ venc_write_reg(VENC_OUTPUT_CONTROL, l);
++
++ dispc_set_digit_size(dssdev->panel.timings.x_res,
++ dssdev->panel.timings.y_res/2);
++
++ regulator_enable(venc.vdda_dac_reg);
++
++ if (dssdev->platform_enable)
++ dssdev->platform_enable(dssdev);
++
++ dispc_enable_digit_out(1);
++}
++
++static void venc_power_off(struct omap_dss_device *dssdev)
++{
++ venc_write_reg(VENC_OUTPUT_CONTROL, 0);
++ dss_set_dac_pwrdn_bgz(0);
++
++ dispc_enable_digit_out(0);
++
++ if (dssdev->platform_disable)
++ dssdev->platform_disable(dssdev);
++
++ regulator_disable(venc.vdda_dac_reg);
++
++ venc_enable_clocks(0);
++}
++
++static int venc_enable_display(struct omap_dss_device *dssdev)
++{
++ int r = 0;
++
++ DSSDBG("venc_enable_display\n");
++
++ mutex_lock(&venc.venc_lock);
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
++ r = -EINVAL;
++ goto err;
++ }
++
++ venc_power_on(dssdev);
++
++ venc.wss_data = 0;
++
++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++err:
++ mutex_unlock(&venc.venc_lock);
++
++ return r;
++}
++
++static void venc_disable_display(struct omap_dss_device *dssdev)
++{
++ DSSDBG("venc_disable_display\n");
++
++ mutex_lock(&venc.venc_lock);
++
++ if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
++ goto end;
++
++ if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) {
++ /* suspended is the same as disabled with venc */
++ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
++ goto end;
++ }
++
++ venc_power_off(dssdev);
++
++ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
++end:
++ mutex_unlock(&venc.venc_lock);
++}
++
++static int venc_display_suspend(struct omap_dss_device *dssdev)
++{
++ int r = 0;
++
++ DSSDBG("venc_display_suspend\n");
++
++ mutex_lock(&venc.venc_lock);
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
++ r = -EINVAL;
++ goto err;
++ }
++
++ venc_power_off(dssdev);
++
++ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
++err:
++ mutex_unlock(&venc.venc_lock);
++
++ return r;
++}
++
++static int venc_display_resume(struct omap_dss_device *dssdev)
++{
++ int r = 0;
++
++ DSSDBG("venc_display_resume\n");
++
++ mutex_lock(&venc.venc_lock);
++
++ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
++ r = -EINVAL;
++ goto err;
++ }
++
++ venc_power_on(dssdev);
++
++ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
++err:
++ mutex_unlock(&venc.venc_lock);
++
++ return r;
++}
++
++static void venc_get_timings(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings)
++{
++ *timings = dssdev->panel.timings;
++}
++
++static void venc_set_timings(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings)
++{
++ DSSDBG("venc_set_timings\n");
++
++ /* Reset WSS data when the TV standard changes. */
++ if (memcmp(&dssdev->panel.timings, timings, sizeof(*timings)))
++ venc.wss_data = 0;
++
++ dssdev->panel.timings = *timings;
++ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
++ /* turn the venc off and on to get new timings to use */
++ venc_disable_display(dssdev);
++ venc_enable_display(dssdev);
++ }
++}
++
++static int venc_check_timings(struct omap_dss_device *dssdev,
++ struct omap_video_timings *timings)
++{
++ DSSDBG("venc_check_timings\n");
++
++ if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0)
++ return 0;
++
++ if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0)
++ return 0;
++
++ return -EINVAL;
++}
++
++static u32 venc_get_wss(struct omap_dss_device *dssdev)
++{
++ /* Invert due to VENC_L21_WC_CTL:INV=1 */
++ return (venc.wss_data >> 8) ^ 0xfffff;
++}
++
++static int venc_set_wss(struct omap_dss_device *dssdev, u32 wss)
++{
++ const struct venc_config *config;
++
++ DSSDBG("venc_set_wss\n");
++
++ mutex_lock(&venc.venc_lock);
++
++ config = venc_timings_to_config(&dssdev->panel.timings);
++
++ /* Invert due to VENC_L21_WC_CTL:INV=1 */
++ venc.wss_data = (wss ^ 0xfffff) << 8;
++
++ venc_enable_clocks(1);
++
++ venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data |
++ venc.wss_data);
++
++ venc_enable_clocks(0);
++
++ mutex_unlock(&venc.venc_lock);
++
++ return 0;
++}
++
++static enum omap_dss_update_mode venc_display_get_update_mode(
++ struct omap_dss_device *dssdev)
++{
++ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
++ return OMAP_DSS_UPDATE_AUTO;
++ else
++ return OMAP_DSS_UPDATE_DISABLED;
++}
++
++int venc_init_display(struct omap_dss_device *dssdev)
++{
++ DSSDBG("init_display\n");
++
++ dssdev->enable = venc_enable_display;
++ dssdev->disable = venc_disable_display;
++ dssdev->suspend = venc_display_suspend;
++ dssdev->resume = venc_display_resume;
++ dssdev->get_timings = venc_get_timings;
++ dssdev->set_timings = venc_set_timings;
++ dssdev->check_timings = venc_check_timings;
++ dssdev->get_wss = venc_get_wss;
++ dssdev->set_wss = venc_set_wss;
++ dssdev->get_update_mode = venc_display_get_update_mode;
++
++ return 0;
++}
++
++void venc_dump_regs(struct seq_file *s)
++{
++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r))
++
++ venc_enable_clocks(1);
++
++ DUMPREG(VENC_F_CONTROL);
++ DUMPREG(VENC_VIDOUT_CTRL);
++ DUMPREG(VENC_SYNC_CTRL);
++ DUMPREG(VENC_LLEN);
++ DUMPREG(VENC_FLENS);
++ DUMPREG(VENC_HFLTR_CTRL);
++ DUMPREG(VENC_CC_CARR_WSS_CARR);
++ DUMPREG(VENC_C_PHASE);
++ DUMPREG(VENC_GAIN_U);
++ DUMPREG(VENC_GAIN_V);
++ DUMPREG(VENC_GAIN_Y);
++ DUMPREG(VENC_BLACK_LEVEL);
++ DUMPREG(VENC_BLANK_LEVEL);
++ DUMPREG(VENC_X_COLOR);
++ DUMPREG(VENC_M_CONTROL);
++ DUMPREG(VENC_BSTAMP_WSS_DATA);
++ DUMPREG(VENC_S_CARR);
++ DUMPREG(VENC_LINE21);
++ DUMPREG(VENC_LN_SEL);
++ DUMPREG(VENC_L21__WC_CTL);
++ DUMPREG(VENC_HTRIGGER_VTRIGGER);
++ DUMPREG(VENC_SAVID__EAVID);
++ DUMPREG(VENC_FLEN__FAL);
++ DUMPREG(VENC_LAL__PHASE_RESET);
++ DUMPREG(VENC_HS_INT_START_STOP_X);
++ DUMPREG(VENC_HS_EXT_START_STOP_X);
++ DUMPREG(VENC_VS_INT_START_X);
++ DUMPREG(VENC_VS_INT_STOP_X__VS_INT_START_Y);
++ DUMPREG(VENC_VS_INT_STOP_Y__VS_EXT_START_X);
++ DUMPREG(VENC_VS_EXT_STOP_X__VS_EXT_START_Y);
++ DUMPREG(VENC_VS_EXT_STOP_Y);
++ DUMPREG(VENC_AVID_START_STOP_X);
++ DUMPREG(VENC_AVID_START_STOP_Y);
++ DUMPREG(VENC_FID_INT_START_X__FID_INT_START_Y);
++ DUMPREG(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X);
++ DUMPREG(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y);
++ DUMPREG(VENC_TVDETGP_INT_START_STOP_X);
++ DUMPREG(VENC_TVDETGP_INT_START_STOP_Y);
++ DUMPREG(VENC_GEN_CTRL);
++ DUMPREG(VENC_OUTPUT_CONTROL);
++ DUMPREG(VENC_OUTPUT_TEST);
++
++ venc_enable_clocks(0);
++
++#undef DUMPREG
++}
+diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig
+new file mode 100644
+index 0000000..bb694cc
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/Kconfig
+@@ -0,0 +1,37 @@
++menuconfig FB_OMAP2
++ tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)"
++ depends on FB && OMAP2_DSS
++
++ select OMAP2_VRAM
++ select OMAP2_VRFB
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ help
++ Frame buffer driver for OMAP2/3 based boards.
++
++config FB_OMAP2_DEBUG_SUPPORT
++ bool "Debug support for OMAP2/3 FB"
++ default y
++ depends on FB_OMAP2
++ help
++ Support for debug output. You have to enable the actual printing
++ with debug module parameter.
++
++config FB_OMAP2_FORCE_AUTO_UPDATE
++ bool "Force main display to automatic update mode"
++ depends on FB_OMAP2
++ help
++ Forces main display to automatic update mode (if possible),
++ and also enables tearsync (if possible). By default
++ displays that support manual update are started in manual
++ update mode.
++
++config FB_OMAP2_NUM_FBS
++ int "Number of framebuffers"
++ range 1 10
++ default 3
++ depends on FB_OMAP2
++ help
++ Select the number of framebuffers created. OMAP2/3 has 3 overlays
++ so normally this would be 3.
+diff --git a/drivers/video/omap2/omapfb/Makefile b/drivers/video/omap2/omapfb/Makefile
+new file mode 100644
+index 0000000..51c2e00
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/Makefile
+@@ -0,0 +1,2 @@
++obj-$(CONFIG_FB_OMAP2) += omapfb.o
++omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o
+diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
+new file mode 100644
+index 0000000..70fb64e
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
+@@ -0,0 +1,727 @@
++/*
++ * linux/drivers/video/omap2/omapfb-ioctl.c
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/fb.h>
++#include <linux/device.h>
++#include <linux/uaccess.h>
++#include <linux/platform_device.h>
++#include <linux/mm.h>
++#include <linux/omapfb.h>
++#include <linux/vmalloc.h>
++
++#include <mach/display.h>
++#include <mach/vrfb.h>
++#include <mach/vram.h>
++
++#include "omapfb.h"
++
++static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ struct omap_dss_device *display = fb2display(fbi);
++ struct omap_overlay *ovl;
++ struct omap_overlay_info info;
++ int r = 0;
++
++ DBG("omapfb_setup_plane\n");
++
++ if (ofbi->num_overlays != 1) {
++ r = -EINVAL;
++ goto out;
++ }
++
++ /* XXX uses only the first overlay */
++ ovl = ofbi->overlays[0];
++
++ if (pi->enabled && !ofbi->region.size) {
++ /*
++ * This plane's memory was freed, can't enable it
++ * until it's reallocated.
++ */
++ r = -EINVAL;
++ goto out;
++ }
++
++ ovl->get_overlay_info(ovl, &info);
++
++ info.pos_x = pi->pos_x;
++ info.pos_y = pi->pos_y;
++ info.out_width = pi->out_width;
++ info.out_height = pi->out_height;
++ info.enabled = pi->enabled;
++
++ r = ovl->set_overlay_info(ovl, &info);
++ if (r)
++ goto out;
++
++ if (ovl->manager) {
++ r = ovl->manager->apply(ovl->manager);
++ if (r)
++ goto out;
++ }
++
++ if (display) {
++ u16 w, h;
++
++ if (display->sync)
++ display->sync(display);
++
++ display->get_resolution(display, &w, &h);
++
++ if (display->update)
++ display->update(display, 0, 0, w, h);
++ }
++
++out:
++ if (r)
++ dev_err(fbdev->dev, "setup_plane failed\n");
++ return r;
++}
++
++static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++
++ if (ofbi->num_overlays != 1) {
++ memset(pi, 0, sizeof(*pi));
++ } else {
++ struct omap_overlay_info *ovli;
++ struct omap_overlay *ovl;
++
++ ovl = ofbi->overlays[0];
++ ovli = &ovl->info;
++
++ pi->pos_x = ovli->pos_x;
++ pi->pos_y = ovli->pos_y;
++ pi->enabled = ovli->enabled;
++ pi->channel_out = 0; /* xxx */
++ pi->mirror = 0;
++ pi->out_width = ovli->out_width;
++ pi->out_height = ovli->out_height;
++ }
++
++ return 0;
++}
++
++static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ struct omapfb2_mem_region *rg;
++ int r, i;
++ size_t size;
++
++ if (mi->type > OMAPFB_MEMTYPE_MAX)
++ return -EINVAL;
++
++ size = PAGE_ALIGN(mi->size);
++
++ rg = &ofbi->region;
++
++ for (i = 0; i < ofbi->num_overlays; i++) {
++ if (ofbi->overlays[i]->info.enabled)
++ return -EBUSY;
++ }
++
++ if (rg->size != size || rg->type != mi->type) {
++ r = omapfb_realloc_fbmem(fbi, size, mi->type);
++ if (r) {
++ dev_err(fbdev->dev, "realloc fbmem failed\n");
++ return r;
++ }
++ }
++
++ return 0;
++}
++
++static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_mem_region *rg;
++
++ rg = &ofbi->region;
++ memset(mi, 0, sizeof(*mi));
++
++ mi->size = rg->size;
++ mi->type = rg->type;
++
++ return 0;
++}
++
++static int omapfb_update_window(struct fb_info *fbi,
++ u32 x, u32 y, u32 w, u32 h)
++{
++ struct omap_dss_device *display = fb2display(fbi);
++ u16 dw, dh;
++
++ if (!display)
++ return 0;
++
++ if (w == 0 || h == 0)
++ return 0;
++
++ display->get_resolution(display, &dw, &dh);
++
++ if (x + w > dw || y + h > dh)
++ return -EINVAL;
++
++ display->update(display, x, y, w, h);
++
++ return 0;
++}
++
++static int omapfb_set_update_mode(struct fb_info *fbi,
++ enum omapfb_update_mode mode)
++{
++ struct omap_dss_device *display = fb2display(fbi);
++ enum omap_dss_update_mode um;
++ int r;
++
++ if (!display || !display->set_update_mode)
++ return -EINVAL;
++
++ switch (mode) {
++ case OMAPFB_UPDATE_DISABLED:
++ um = OMAP_DSS_UPDATE_DISABLED;
++ break;
++
++ case OMAPFB_AUTO_UPDATE:
++ um = OMAP_DSS_UPDATE_AUTO;
++ break;
++
++ case OMAPFB_MANUAL_UPDATE:
++ um = OMAP_DSS_UPDATE_MANUAL;
++ break;
++
++ default:
++ return -EINVAL;
++ }
++
++ r = display->set_update_mode(display, um);
++
++ return r;
++}
++
++static int omapfb_get_update_mode(struct fb_info *fbi,
++ enum omapfb_update_mode *mode)
++{
++ struct omap_dss_device *display = fb2display(fbi);
++ enum omap_dss_update_mode m;
++
++ if (!display || !display->get_update_mode)
++ return -EINVAL;
++
++ m = display->get_update_mode(display);
++
++ switch (m) {
++ case OMAP_DSS_UPDATE_DISABLED:
++ *mode = OMAPFB_UPDATE_DISABLED;
++ break;
++ case OMAP_DSS_UPDATE_AUTO:
++ *mode = OMAPFB_AUTO_UPDATE;
++ break;
++ case OMAP_DSS_UPDATE_MANUAL:
++ *mode = OMAPFB_MANUAL_UPDATE;
++ break;
++ default:
++ BUG();
++ }
++
++ return 0;
++}
++
++/* XXX this color key handling is a hack... */
++static struct omapfb_color_key omapfb_color_keys[2];
++
++static int _omapfb_set_color_key(struct omap_overlay_manager *mgr,
++ struct omapfb_color_key *ck)
++{
++ struct omap_overlay_manager_info info;
++ enum omap_dss_trans_key_type kt;
++ int r;
++
++ mgr->get_manager_info(mgr, &info);
++
++ if (ck->key_type == OMAPFB_COLOR_KEY_DISABLED) {
++ info.trans_enabled = false;
++ omapfb_color_keys[mgr->id] = *ck;
++
++ r = mgr->set_manager_info(mgr, &info);
++ if (r)
++ return r;
++
++ r = mgr->apply(mgr);
++
++ return r;
++ }
++
++ switch (ck->key_type) {
++ case OMAPFB_COLOR_KEY_GFX_DST:
++ kt = OMAP_DSS_COLOR_KEY_GFX_DST;
++ break;
++ case OMAPFB_COLOR_KEY_VID_SRC:
++ kt = OMAP_DSS_COLOR_KEY_VID_SRC;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ info.default_color = ck->background;
++ info.trans_key = ck->trans_key;
++ info.trans_key_type = kt;
++ info.trans_enabled = true;
++
++ omapfb_color_keys[mgr->id] = *ck;
++
++ r = mgr->set_manager_info(mgr, &info);
++ if (r)
++ return r;
++
++ r = mgr->apply(mgr);
++
++ return r;
++}
++
++static int omapfb_set_color_key(struct fb_info *fbi,
++ struct omapfb_color_key *ck)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ int r;
++ int i;
++ struct omap_overlay_manager *mgr = NULL;
++
++ omapfb_lock(fbdev);
++
++ for (i = 0; i < ofbi->num_overlays; i++) {
++ if (ofbi->overlays[i]->manager) {
++ mgr = ofbi->overlays[i]->manager;
++ break;
++ }
++ }
++
++ if (!mgr) {
++ r = -EINVAL;
++ goto err;
++ }
++
++ r = _omapfb_set_color_key(mgr, ck);
++err:
++ omapfb_unlock(fbdev);
++
++ return r;
++}
++
++static int omapfb_get_color_key(struct fb_info *fbi,
++ struct omapfb_color_key *ck)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ struct omap_overlay_manager *mgr = NULL;
++ int r = 0;
++ int i;
++
++ omapfb_lock(fbdev);
++
++ for (i = 0; i < ofbi->num_overlays; i++) {
++ if (ofbi->overlays[i]->manager) {
++ mgr = ofbi->overlays[i]->manager;
++ break;
++ }
++ }
++
++ if (!mgr) {
++ r = -EINVAL;
++ goto err;
++ }
++
++ *ck = omapfb_color_keys[mgr->id];
++err:
++ omapfb_unlock(fbdev);
++
++ return r;
++}
++
++static int omapfb_memory_read(struct fb_info *fbi,
++ struct omapfb_memory_read *mr)
++{
++ struct omap_dss_device *display = fb2display(fbi);
++ void *buf;
++ int r;
++
++ if (!display || !display->memory_read)
++ return -ENOENT;
++
++ if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size))
++ return -EFAULT;
++
++ if (mr->w * mr->h * 3 > mr->buffer_size)
++ return -EINVAL;
++
++ buf = vmalloc(mr->buffer_size);
++ if (!buf) {
++ DBG("vmalloc failed\n");
++ return -ENOMEM;
++ }
++
++ r = display->memory_read(display, buf, mr->buffer_size,
++ mr->x, mr->y, mr->w, mr->h);
++
++ if (r > 0) {
++ if (copy_to_user(mr->buffer, buf, mr->buffer_size))
++ r = -EFAULT;
++ }
++
++ vfree(buf);
++
++ return r;
++}
++
++static int omapfb_get_ovl_colormode(struct omapfb2_device *fbdev,
++ struct omapfb_ovl_colormode *mode)
++{
++ int ovl_idx = mode->overlay_idx;
++ int mode_idx = mode->mode_idx;
++ struct omap_overlay *ovl;
++ enum omap_color_mode supported_modes;
++ struct fb_var_screeninfo var;
++ int i;
++
++ if (ovl_idx >= fbdev->num_overlays)
++ return -ENODEV;
++ ovl = fbdev->overlays[ovl_idx];
++ supported_modes = ovl->supported_modes;
++
++ mode_idx = mode->mode_idx;
++
++ for (i = 0; i < sizeof(supported_modes) * 8; i++) {
++ if (!(supported_modes & (1 << i)))
++ continue;
++ /*
++ * It's possible that the FB doesn't support a mode
++ * that is supported by the overlay, so call the
++ * following here.
++ */
++ if (dss_mode_to_fb_mode(1 << i, &var) < 0)
++ continue;
++
++ mode_idx--;
++ if (mode_idx < 0)
++ break;
++ }
++
++ if (i == sizeof(supported_modes) * 8)
++ return -ENOENT;
++
++ mode->bits_per_pixel = var.bits_per_pixel;
++ mode->nonstd = var.nonstd;
++ mode->red = var.red;
++ mode->green = var.green;
++ mode->blue = var.blue;
++ mode->transp = var.transp;
++
++ return 0;
++}
++
++static int omapfb_wait_for_go(struct fb_info *fbi)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ int r = 0;
++ int i;
++
++ for (i = 0; i < ofbi->num_overlays; ++i) {
++ struct omap_overlay *ovl = ofbi->overlays[i];
++ r = ovl->wait_for_go(ovl);
++ if (r)
++ break;
++ }
++
++ return r;
++}
++
++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ struct omap_dss_device *display = fb2display(fbi);
++
++ union {
++ struct omapfb_update_window_old uwnd_o;
++ struct omapfb_update_window uwnd;
++ struct omapfb_plane_info plane_info;
++ struct omapfb_caps caps;
++ struct omapfb_mem_info mem_info;
++ struct omapfb_color_key color_key;
++ struct omapfb_ovl_colormode ovl_colormode;
++ enum omapfb_update_mode update_mode;
++ int test_num;
++ struct omapfb_memory_read memory_read;
++ struct omapfb_vram_info vram_info;
++ } p;
++
++ int r = 0;
++
++ switch (cmd) {
++ case OMAPFB_SYNC_GFX:
++ DBG("ioctl SYNC_GFX\n");
++ if (!display || !display->sync) {
++ /* DSS1 never returns an error here, so we neither */
++ /*r = -EINVAL;*/
++ break;
++ }
++
++ r = display->sync(display);
++ break;
++
++ case OMAPFB_UPDATE_WINDOW_OLD:
++ DBG("ioctl UPDATE_WINDOW_OLD\n");
++ if (!display || !display->update) {
++ r = -EINVAL;
++ break;
++ }
++
++ if (copy_from_user(&p.uwnd_o,
++ (void __user *)arg,
++ sizeof(p.uwnd_o))) {
++ r = -EFAULT;
++ break;
++ }
++
++ r = omapfb_update_window(fbi, p.uwnd_o.x, p.uwnd_o.y,
++ p.uwnd_o.width, p.uwnd_o.height);
++ break;
++
++ case OMAPFB_UPDATE_WINDOW:
++ DBG("ioctl UPDATE_WINDOW\n");
++ if (!display || !display->update) {
++ r = -EINVAL;
++ break;
++ }
++
++ if (copy_from_user(&p.uwnd, (void __user *)arg,
++ sizeof(p.uwnd))) {
++ r = -EFAULT;
++ break;
++ }
++
++ r = omapfb_update_window(fbi, p.uwnd.x, p.uwnd.y,
++ p.uwnd.width, p.uwnd.height);
++ break;
++
++ case OMAPFB_SETUP_PLANE:
++ DBG("ioctl SETUP_PLANE\n");
++ if (copy_from_user(&p.plane_info, (void __user *)arg,
++ sizeof(p.plane_info)))
++ r = -EFAULT;
++ else
++ r = omapfb_setup_plane(fbi, &p.plane_info);
++ break;
++
++ case OMAPFB_QUERY_PLANE:
++ DBG("ioctl QUERY_PLANE\n");
++ r = omapfb_query_plane(fbi, &p.plane_info);
++ if (r < 0)
++ break;
++ if (copy_to_user((void __user *)arg, &p.plane_info,
++ sizeof(p.plane_info)))
++ r = -EFAULT;
++ break;
++
++ case OMAPFB_SETUP_MEM:
++ DBG("ioctl SETUP_MEM\n");
++ if (copy_from_user(&p.mem_info, (void __user *)arg,
++ sizeof(p.mem_info)))
++ r = -EFAULT;
++ else
++ r = omapfb_setup_mem(fbi, &p.mem_info);
++ break;
++
++ case OMAPFB_QUERY_MEM:
++ DBG("ioctl QUERY_MEM\n");
++ r = omapfb_query_mem(fbi, &p.mem_info);
++ if (r < 0)
++ break;
++ if (copy_to_user((void __user *)arg, &p.mem_info,
++ sizeof(p.mem_info)))
++ r = -EFAULT;
++ break;
++
++ case OMAPFB_GET_CAPS:
++ DBG("ioctl GET_CAPS\n");
++ if (!display) {
++ r = -EINVAL;
++ break;
++ }
++
++ memset(&p.caps, 0, sizeof(p.caps));
++ p.caps.ctrl = display->caps;
++
++ if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps)))
++ r = -EFAULT;
++ break;
++
++ case OMAPFB_GET_OVERLAY_COLORMODE:
++ DBG("ioctl GET_OVERLAY_COLORMODE\n");
++ if (copy_from_user(&p.ovl_colormode, (void __user *)arg,
++ sizeof(p.ovl_colormode))) {
++ r = -EFAULT;
++ break;
++ }
++ r = omapfb_get_ovl_colormode(fbdev, &p.ovl_colormode);
++ if (r < 0)
++ break;
++ if (copy_to_user((void __user *)arg, &p.ovl_colormode,
++ sizeof(p.ovl_colormode)))
++ r = -EFAULT;
++ break;
++
++ case OMAPFB_SET_UPDATE_MODE:
++ DBG("ioctl SET_UPDATE_MODE\n");
++ if (get_user(p.update_mode, (int __user *)arg))
++ r = -EFAULT;
++ else
++ r = omapfb_set_update_mode(fbi, p.update_mode);
++ break;
++
++ case OMAPFB_GET_UPDATE_MODE:
++ DBG("ioctl GET_UPDATE_MODE\n");
++ r = omapfb_get_update_mode(fbi, &p.update_mode);
++ if (r)
++ break;
++ if (put_user(p.update_mode,
++ (enum omapfb_update_mode __user *)arg))
++ r = -EFAULT;
++ break;
++
++ case OMAPFB_SET_COLOR_KEY:
++ DBG("ioctl SET_COLOR_KEY\n");
++ if (copy_from_user(&p.color_key, (void __user *)arg,
++ sizeof(p.color_key)))
++ r = -EFAULT;
++ else
++ r = omapfb_set_color_key(fbi, &p.color_key);
++ break;
++
++ case OMAPFB_GET_COLOR_KEY:
++ DBG("ioctl GET_COLOR_KEY\n");
++ r = omapfb_get_color_key(fbi, &p.color_key);
++ if (r)
++ break;
++ if (copy_to_user((void __user *)arg, &p.color_key,
++ sizeof(p.color_key)))
++ r = -EFAULT;
++ break;
++
++ case OMAPFB_WAITFORVSYNC:
++ DBG("ioctl WAITFORVSYNC\n");
++ if (!display) {
++ r = -EINVAL;
++ break;
++ }
++
++ r = display->wait_vsync(display);
++ break;
++
++ case OMAPFB_WAITFORGO:
++ DBG("ioctl WAITFORGO\n");
++ if (!display) {
++ r = -EINVAL;
++ break;
++ }
++
++ r = omapfb_wait_for_go(fbi);
++ break;
++
++ /* LCD and CTRL tests do the same thing for backward
++ * compatibility */
++ case OMAPFB_LCD_TEST:
++ DBG("ioctl LCD_TEST\n");
++ if (get_user(p.test_num, (int __user *)arg)) {
++ r = -EFAULT;
++ break;
++ }
++ if (!display || !display->run_test) {
++ r = -EINVAL;
++ break;
++ }
++
++ r = display->run_test(display, p.test_num);
++
++ break;
++
++ case OMAPFB_CTRL_TEST:
++ DBG("ioctl CTRL_TEST\n");
++ if (get_user(p.test_num, (int __user *)arg)) {
++ r = -EFAULT;
++ break;
++ }
++ if (!display || !display->run_test) {
++ r = -EINVAL;
++ break;
++ }
++
++ r = display->run_test(display, p.test_num);
++
++ break;
++
++ case OMAPFB_MEMORY_READ:
++ DBG("ioctl MEMORY_READ\n");
++
++ if (copy_from_user(&p.memory_read, (void __user *)arg,
++ sizeof(p.memory_read))) {
++ r = -EFAULT;
++ break;
++ }
++
++ r = omapfb_memory_read(fbi, &p.memory_read);
++
++ break;
++
++ case OMAPFB_GET_VRAM_INFO: {
++ unsigned long vram, free, largest;
++
++ DBG("ioctl GET_VRAM_INFO\n");
++
++ omap_vram_get_info(&vram, &free, &largest);
++ p.vram_info.total = vram;
++ p.vram_info.free = free;
++ p.vram_info.largest_free_block = largest;
++
++ if (copy_to_user((void __user *)arg, &p.vram_info,
++ sizeof(p.vram_info)))
++ r = -EFAULT;
++ break;
++ }
++
++ default:
++ dev_err(fbdev->dev, "Unknown ioctl 0x%x\n", cmd);
++ r = -EINVAL;
++ }
++
++ if (r < 0)
++ DBG("ioctl failed: %d\n", r);
++
++ return r;
++}
++
++
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+new file mode 100644
+index 0000000..7f5ec3b
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -0,0 +1,2137 @@
++/*
++ * linux/drivers/video/omap2/omapfb-main.c
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/fb.h>
++#include <linux/dma-mapping.h>
++#include <linux/vmalloc.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/omapfb.h>
++
++#include <mach/display.h>
++#include <mach/vram.h>
++#include <mach/vrfb.h>
++
++#include "omapfb.h"
++
++#define MODULE_NAME "omapfb"
++
++#define OMAPFB_PLANE_XRES_MIN 8
++#define OMAPFB_PLANE_YRES_MIN 8
++
++static char *def_mode;
++static char *def_vram;
++static int def_vrfb;
++static int def_rotate;
++static int def_mirror;
++
++#ifdef DEBUG
++unsigned int omapfb_debug;
++module_param_named(debug, omapfb_debug, bool, 0644);
++static unsigned int omapfb_test_pattern;
++module_param_named(test, omapfb_test_pattern, bool, 0644);
++#endif
++
++static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi);
++
++#ifdef DEBUG
++static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color)
++{
++ struct fb_var_screeninfo *var = &fbi->var;
++ struct fb_fix_screeninfo *fix = &fbi->fix;
++ void __iomem *addr = fbi->screen_base;
++ const unsigned bytespp = var->bits_per_pixel >> 3;
++ const unsigned line_len = fix->line_length / bytespp;
++
++ int r = (color >> 16) & 0xff;
++ int g = (color >> 8) & 0xff;
++ int b = (color >> 0) & 0xff;
++
++ if (var->bits_per_pixel == 16) {
++ u16 __iomem *p = (u16 __iomem *)addr;
++ p += y * line_len + x;
++
++ r = r * 32 / 256;
++ g = g * 64 / 256;
++ b = b * 32 / 256;
++
++ __raw_writew((r << 11) | (g << 5) | (b << 0), p);
++ } else if (var->bits_per_pixel == 24) {
++ u8 __iomem *p = (u8 __iomem *)addr;
++ p += (y * line_len + x) * 3;
++
++ __raw_writeb(b, p + 0);
++ __raw_writeb(g, p + 1);
++ __raw_writeb(r, p + 2);
++ } else if (var->bits_per_pixel == 32) {
++ u32 __iomem *p = (u32 __iomem *)addr;
++ p += y * line_len + x;
++ __raw_writel(color, p);
++ }
++}
++
++static void fill_fb(struct fb_info *fbi)
++{
++ struct fb_var_screeninfo *var = &fbi->var;
++ const short w = var->xres_virtual;
++ const short h = var->yres_virtual;
++ void __iomem *addr = fbi->screen_base;
++ int y, x;
++
++ if (!addr)
++ return;
++
++ DBG("fill_fb %dx%d, line_len %d bytes\n", w, h, fbi->fix.line_length);
++
++ for (y = 0; y < h; y++) {
++ for (x = 0; x < w; x++) {
++ if (x < 20 && y < 20)
++ draw_pixel(fbi, x, y, 0xffffff);
++ else if (x < 20 && (y > 20 && y < h - 20))
++ draw_pixel(fbi, x, y, 0xff);
++ else if (y < 20 && (x > 20 && x < w - 20))
++ draw_pixel(fbi, x, y, 0xff00);
++ else if (x > w - 20 && (y > 20 && y < h - 20))
++ draw_pixel(fbi, x, y, 0xff0000);
++ else if (y > h - 20 && (x > 20 && x < w - 20))
++ draw_pixel(fbi, x, y, 0xffff00);
++ else if (x == 20 || x == w - 20 ||
++ y == 20 || y == h - 20)
++ draw_pixel(fbi, x, y, 0xffffff);
++ else if (x == y || w - x == h - y)
++ draw_pixel(fbi, x, y, 0xff00ff);
++ else if (w - x == y || x == h - y)
++ draw_pixel(fbi, x, y, 0x00ffff);
++ else if (x > 20 && y > 20 && x < w - 20 && y < h - 20) {
++ int t = x * 3 / w;
++ unsigned r = 0, g = 0, b = 0;
++ unsigned c;
++ if (var->bits_per_pixel == 16) {
++ if (t == 0)
++ b = (y % 32) * 256 / 32;
++ else if (t == 1)
++ g = (y % 64) * 256 / 64;
++ else if (t == 2)
++ r = (y % 32) * 256 / 32;
++ } else {
++ if (t == 0)
++ b = (y % 256);
++ else if (t == 1)
++ g = (y % 256);
++ else if (t == 2)
++ r = (y % 256);
++ }
++ c = (r << 16) | (g << 8) | (b << 0);
++ draw_pixel(fbi, x, y, c);
++ } else {
++ draw_pixel(fbi, x, y, 0);
++ }
++ }
++ }
++}
++#endif
++
++static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot)
++{
++ struct vrfb *vrfb = &ofbi->region.vrfb;
++ unsigned offset;
++
++ switch (rot) {
++ case FB_ROTATE_UR:
++ offset = 0;
++ break;
++ case FB_ROTATE_CW:
++ offset = vrfb->yoffset;
++ break;
++ case FB_ROTATE_UD:
++ offset = vrfb->yoffset * OMAP_VRFB_LINE_LEN + vrfb->xoffset;
++ break;
++ case FB_ROTATE_CCW:
++ offset = vrfb->xoffset * OMAP_VRFB_LINE_LEN;
++ break;
++ default:
++ BUG();
++ }
++
++ offset *= vrfb->bytespp;
++
++ return offset;
++}
++
++static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi, int rot)
++{
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++ return ofbi->region.vrfb.paddr[rot]
++ + omapfb_get_vrfb_offset(ofbi, rot);
++ } else {
++ return ofbi->region.paddr;
++ }
++}
++
++static u32 omapfb_get_region_paddr(struct omapfb_info *ofbi)
++{
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
++ return ofbi->region.vrfb.paddr[0];
++ else
++ return ofbi->region.paddr;
++}
++
++static void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi)
++{
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
++ return ofbi->region.vrfb.vaddr[0];
++ else
++ return ofbi->region.vaddr;
++}
++
++static struct omapfb_colormode omapfb_colormodes[] = {
++ {
++ .dssmode = OMAP_DSS_COLOR_UYVY,
++ .bits_per_pixel = 16,
++ .nonstd = OMAPFB_COLOR_YUV422,
++ }, {
++ .dssmode = OMAP_DSS_COLOR_YUV2,
++ .bits_per_pixel = 16,
++ .nonstd = OMAPFB_COLOR_YUY422,
++ }, {
++ .dssmode = OMAP_DSS_COLOR_ARGB16,
++ .bits_per_pixel = 16,
++ .red = { .length = 4, .offset = 8, .msb_right = 0 },
++ .green = { .length = 4, .offset = 4, .msb_right = 0 },
++ .blue = { .length = 4, .offset = 0, .msb_right = 0 },
++ .transp = { .length = 4, .offset = 12, .msb_right = 0 },
++ }, {
++ .dssmode = OMAP_DSS_COLOR_RGB16,
++ .bits_per_pixel = 16,
++ .red = { .length = 5, .offset = 11, .msb_right = 0 },
++ .green = { .length = 6, .offset = 5, .msb_right = 0 },
++ .blue = { .length = 5, .offset = 0, .msb_right = 0 },
++ .transp = { .length = 0, .offset = 0, .msb_right = 0 },
++ }, {
++ .dssmode = OMAP_DSS_COLOR_RGB24P,
++ .bits_per_pixel = 24,
++ .red = { .length = 8, .offset = 16, .msb_right = 0 },
++ .green = { .length = 8, .offset = 8, .msb_right = 0 },
++ .blue = { .length = 8, .offset = 0, .msb_right = 0 },
++ .transp = { .length = 0, .offset = 0, .msb_right = 0 },
++ }, {
++ .dssmode = OMAP_DSS_COLOR_RGB24U,
++ .bits_per_pixel = 32,
++ .red = { .length = 8, .offset = 16, .msb_right = 0 },
++ .green = { .length = 8, .offset = 8, .msb_right = 0 },
++ .blue = { .length = 8, .offset = 0, .msb_right = 0 },
++ .transp = { .length = 0, .offset = 0, .msb_right = 0 },
++ }, {
++ .dssmode = OMAP_DSS_COLOR_ARGB32,
++ .bits_per_pixel = 32,
++ .red = { .length = 8, .offset = 16, .msb_right = 0 },
++ .green = { .length = 8, .offset = 8, .msb_right = 0 },
++ .blue = { .length = 8, .offset = 0, .msb_right = 0 },
++ .transp = { .length = 8, .offset = 24, .msb_right = 0 },
++ }, {
++ .dssmode = OMAP_DSS_COLOR_RGBA32,
++ .bits_per_pixel = 32,
++ .red = { .length = 8, .offset = 24, .msb_right = 0 },
++ .green = { .length = 8, .offset = 16, .msb_right = 0 },
++ .blue = { .length = 8, .offset = 8, .msb_right = 0 },
++ .transp = { .length = 8, .offset = 0, .msb_right = 0 },
++ }, {
++ .dssmode = OMAP_DSS_COLOR_RGBX32,
++ .bits_per_pixel = 32,
++ .red = { .length = 8, .offset = 24, .msb_right = 0 },
++ .green = { .length = 8, .offset = 16, .msb_right = 0 },
++ .blue = { .length = 8, .offset = 8, .msb_right = 0 },
++ .transp = { .length = 0, .offset = 0, .msb_right = 0 },
++ },
++};
++
++static bool cmp_var_to_colormode(struct fb_var_screeninfo *var,
++ struct omapfb_colormode *color)
++{
++ bool cmp_component(struct fb_bitfield *f1, struct fb_bitfield *f2)
++ {
++ return f1->length == f2->length &&
++ f1->offset == f2->offset &&
++ f1->msb_right == f2->msb_right;
++ }
++
++ if (var->bits_per_pixel == 0 ||
++ var->red.length == 0 ||
++ var->blue.length == 0 ||
++ var->green.length == 0)
++ return 0;
++
++ return var->bits_per_pixel == color->bits_per_pixel &&
++ cmp_component(&var->red, &color->red) &&
++ cmp_component(&var->green, &color->green) &&
++ cmp_component(&var->blue, &color->blue) &&
++ cmp_component(&var->transp, &color->transp);
++}
++
++static void assign_colormode_to_var(struct fb_var_screeninfo *var,
++ struct omapfb_colormode *color)
++{
++ var->bits_per_pixel = color->bits_per_pixel;
++ var->nonstd = color->nonstd;
++ var->red = color->red;
++ var->green = color->green;
++ var->blue = color->blue;
++ var->transp = color->transp;
++}
++
++static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var)
++{
++ enum omap_color_mode dssmode;
++ int i;
++
++ /* first match with nonstd field */
++ if (var->nonstd) {
++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
++ struct omapfb_colormode *mode = &omapfb_colormodes[i];
++ if (var->nonstd == mode->nonstd) {
++ assign_colormode_to_var(var, mode);
++ return mode->dssmode;
++ }
++ }
++
++ return -EINVAL;
++ }
++
++ /* then try exact match of bpp and colors */
++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
++ struct omapfb_colormode *mode = &omapfb_colormodes[i];
++ if (cmp_var_to_colormode(var, mode)) {
++ assign_colormode_to_var(var, mode);
++ return mode->dssmode;
++ }
++ }
++
++ /* match with bpp if user has not filled color fields
++ * properly */
++ switch (var->bits_per_pixel) {
++ case 1:
++ dssmode = OMAP_DSS_COLOR_CLUT1;
++ break;
++ case 2:
++ dssmode = OMAP_DSS_COLOR_CLUT2;
++ break;
++ case 4:
++ dssmode = OMAP_DSS_COLOR_CLUT4;
++ break;
++ case 8:
++ dssmode = OMAP_DSS_COLOR_CLUT8;
++ break;
++ case 12:
++ dssmode = OMAP_DSS_COLOR_RGB12U;
++ break;
++ case 16:
++ dssmode = OMAP_DSS_COLOR_RGB16;
++ break;
++ case 24:
++ dssmode = OMAP_DSS_COLOR_RGB24P;
++ break;
++ case 32:
++ dssmode = OMAP_DSS_COLOR_RGB24U;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
++ struct omapfb_colormode *mode = &omapfb_colormodes[i];
++ if (dssmode == mode->dssmode) {
++ assign_colormode_to_var(var, mode);
++ return mode->dssmode;
++ }
++ }
++
++ return -EINVAL;
++}
++
++int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
++ struct fb_var_screeninfo *var)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
++ struct omapfb_colormode *mode = &omapfb_colormodes[i];
++ if (dssmode == mode->dssmode) {
++ assign_colormode_to_var(var, mode);
++ return 0;
++ }
++ }
++ return -ENOENT;
++}
++
++void set_fb_fix(struct fb_info *fbi)
++{
++ struct fb_fix_screeninfo *fix = &fbi->fix;
++ struct fb_var_screeninfo *var = &fbi->var;
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_mem_region *rg = &ofbi->region;
++
++ DBG("set_fb_fix\n");
++
++ /* used by open/write in fbmem.c */
++ fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi);
++
++ DBG("changing rotation to %d\n", var->rotate);
++
++ /* used by mmap in fbmem.c */
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++ switch (var->nonstd) {
++ case OMAPFB_COLOR_YUV422:
++ case OMAPFB_COLOR_YUY422:
++ fix->line_length =
++ (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2;
++ break;
++ default:
++ fix->line_length =
++ (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3;
++ break;
++ }
++ } else
++ fix->line_length =
++ (var->xres_virtual * var->bits_per_pixel) >> 3;
++ fix->smem_start = omapfb_get_region_paddr(ofbi);
++ fix->smem_len = rg->size;
++
++ fix->type = FB_TYPE_PACKED_PIXELS;
++
++ if (var->nonstd)
++ fix->visual = FB_VISUAL_PSEUDOCOLOR;
++ else {
++ switch (var->bits_per_pixel) {
++ case 32:
++ case 24:
++ case 16:
++ case 12:
++ fix->visual = FB_VISUAL_TRUECOLOR;
++ /* 12bpp is stored in 16 bits */
++ break;
++ case 1:
++ case 2:
++ case 4:
++ case 8:
++ fix->visual = FB_VISUAL_PSEUDOCOLOR;
++ break;
++ }
++ }
++
++ fix->accel = FB_ACCEL_NONE;
++
++ fix->xpanstep = 1;
++ fix->ypanstep = 1;
++
++ if (rg->size && ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++ unsigned bytespp;
++ bool yuv_mode;
++ enum omap_color_mode mode;
++
++ mode = fb_mode_to_dss_mode(var);
++
++ bytespp = var->bits_per_pixel >> 3;
++
++ if (mode == OMAP_DSS_COLOR_YUV2 || mode == OMAP_DSS_COLOR_UYVY)
++ yuv_mode = true;
++ else
++ yuv_mode = false;
++
++ omap_vrfb_setup(&rg->vrfb, rg->paddr,
++ var->xres_virtual,
++ var->yres_virtual,
++ bytespp, yuv_mode);
++ }
++}
++
++/* check new var and possibly modify it to be ok */
++int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omap_dss_device *display = fb2display(fbi);
++ unsigned long max_frame_size;
++ unsigned long line_size;
++ int xres_min, yres_min;
++ int xres_max, yres_max;
++ enum omap_color_mode mode = 0;
++ int i;
++ int bytespp;
++
++ DBG("check_fb_var %d\n", ofbi->id);
++
++ if (ofbi->region.size == 0)
++ return 0;
++
++ mode = fb_mode_to_dss_mode(var);
++ if (mode < 0) {
++ DBG("cannot convert var to omap dss mode\n");
++ return -EINVAL;
++ }
++
++ for (i = 0; i < ofbi->num_overlays; ++i) {
++ if ((ofbi->overlays[i]->supported_modes & mode) == 0) {
++ DBG("invalid mode\n");
++ return -EINVAL;
++ }
++ }
++
++ if (var->rotate < 0 || var->rotate > 3)
++ return -EINVAL;
++
++ xres_min = OMAPFB_PLANE_XRES_MIN;
++ xres_max = 2048;
++ yres_min = OMAPFB_PLANE_YRES_MIN;
++ yres_max = 2048;
++
++ bytespp = var->bits_per_pixel >> 3;
++
++ /* XXX: some applications seem to set virtual res to 0. */
++ if (var->xres_virtual == 0)
++ var->xres_virtual = var->xres;
++
++ if (var->yres_virtual == 0)
++ var->yres_virtual = var->yres;
++
++ if (var->xres_virtual < xres_min || var->yres_virtual < yres_min)
++ return -EINVAL;
++
++ if (var->xres < xres_min)
++ var->xres = xres_min;
++ if (var->yres < yres_min)
++ var->yres = yres_min;
++ if (var->xres > xres_max)
++ var->xres = xres_max;
++ if (var->yres > yres_max)
++ var->yres = yres_max;
++
++ if (var->xres > var->xres_virtual)
++ var->xres = var->xres_virtual;
++ if (var->yres > var->yres_virtual)
++ var->yres = var->yres_virtual;
++
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
++ line_size = OMAP_VRFB_LINE_LEN * bytespp;
++ else
++ line_size = var->xres_virtual * bytespp;
++
++ max_frame_size = ofbi->region.size;
++
++ DBG("max frame size %lu, line size %lu\n", max_frame_size, line_size);
++
++ if (line_size * var->yres_virtual > max_frame_size) {
++ DBG("can't fit FB into memory, reducing y\n");
++ var->yres_virtual = max_frame_size / line_size;
++
++ if (var->yres_virtual < yres_min)
++ var->yres_virtual = yres_min;
++
++ if (var->yres > var->yres_virtual)
++ var->yres = var->yres_virtual;
++ }
++
++ if (line_size * var->yres_virtual > max_frame_size) {
++ DBG("can't fit FB into memory, reducing x\n");
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
++ return -EINVAL;
++
++ var->xres_virtual = max_frame_size / var->yres_virtual /
++ bytespp;
++
++ if (var->xres_virtual < xres_min)
++ var->xres_virtual = xres_min;
++
++ if (var->xres > var->xres_virtual)
++ var->xres = var->xres_virtual;
++
++ line_size = var->xres_virtual * bytespp;
++ }
++
++ if (line_size * var->yres_virtual > max_frame_size) {
++ DBG("cannot fit FB to memory\n");
++ return -EINVAL;
++ }
++
++ if (var->xres + var->xoffset > var->xres_virtual)
++ var->xoffset = var->xres_virtual - var->xres;
++ if (var->yres + var->yoffset > var->yres_virtual)
++ var->yoffset = var->yres_virtual - var->yres;
++
++ DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n",
++ var->xres, var->yres,
++ var->xres_virtual, var->yres_virtual);
++
++ var->height = -1;
++ var->width = -1;
++ var->grayscale = 0;
++
++ if (display && display->get_timings) {
++ struct omap_video_timings timings;
++ display->get_timings(display, &timings);
++
++ /* pixclock in ps, the rest in pixclock */
++ var->pixclock = timings.pixel_clock != 0 ?
++ KHZ2PICOS(timings.pixel_clock) :
++ 0;
++ var->left_margin = timings.hfp;
++ var->right_margin = timings.hbp;
++ var->upper_margin = timings.vfp;
++ var->lower_margin = timings.vbp;
++ var->hsync_len = timings.hsw;
++ var->vsync_len = timings.vsw;
++ } else {
++ var->pixclock = 0;
++ var->left_margin = 0;
++ var->right_margin = 0;
++ var->upper_margin = 0;
++ var->lower_margin = 0;
++ var->hsync_len = 0;
++ var->vsync_len = 0;
++ }
++
++ /* TODO: get these from panel->config */
++ var->vmode = FB_VMODE_NONINTERLACED;
++ var->sync = 0;
++
++ return 0;
++}
++
++/*
++ * ---------------------------------------------------------------------------
++ * fbdev framework callbacks
++ * ---------------------------------------------------------------------------
++ */
++static int omapfb_open(struct fb_info *fbi, int user)
++{
++ return 0;
++}
++
++static int omapfb_release(struct fb_info *fbi, int user)
++{
++#if 0
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ struct omap_dss_device *display = fb2display(fbi);
++
++ DBG("Closing fb with plane index %d\n", ofbi->id);
++
++ omapfb_lock(fbdev);
++
++ if (display && display->get_update_mode && display->update) {
++ /* XXX this update should be removed, I think. But it's
++ * good for debugging */
++ if (display->get_update_mode(display) ==
++ OMAP_DSS_UPDATE_MANUAL) {
++ u16 w, h;
++
++ if (display->sync)
++ display->sync(display);
++
++ display->get_resolution(display, &w, &h);
++ display->update(display, 0, 0, w, h);
++ }
++ }
++
++ if (display && display->sync)
++ display->sync(display);
++
++ omapfb_unlock(fbdev);
++#endif
++ return 0;
++}
++
++/* setup overlay according to the fb */
++static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
++ u16 posx, u16 posy, u16 outw, u16 outh)
++{
++ int r = 0;
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct fb_var_screeninfo *var = &fbi->var;
++ struct fb_fix_screeninfo *fix = &fbi->fix;
++ enum omap_color_mode mode = 0;
++ int offset;
++ u32 data_start_p;
++ void __iomem *data_start_v;
++ struct omap_overlay_info info;
++ int xres, yres;
++ int screen_width;
++ int mirror;
++ int rotation = var->rotate;
++ int i;
++
++ for (i = 0; i < ofbi->num_overlays; i++) {
++ if (ovl != ofbi->overlays[i])
++ continue;
++
++ rotation = (rotation + ofbi->rotation[i]) % 4;
++ break;
++ }
++
++ DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id,
++ posx, posy, outw, outh);
++
++ if (rotation == FB_ROTATE_CW || rotation == FB_ROTATE_CCW) {
++ xres = var->yres;
++ yres = var->xres;
++ } else {
++ xres = var->xres;
++ yres = var->yres;
++ }
++
++ offset = ((var->yoffset * var->xres_virtual +
++ var->xoffset) * var->bits_per_pixel) >> 3;
++
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++ data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation);
++ data_start_v = NULL;
++ } else {
++ data_start_p = omapfb_get_region_paddr(ofbi);
++ data_start_v = omapfb_get_region_vaddr(ofbi);
++ }
++
++ data_start_p += offset;
++ data_start_v += offset;
++
++ mode = fb_mode_to_dss_mode(var);
++
++ if (mode == -EINVAL) {
++ DBG("fb_mode_to_dss_mode failed");
++ r = -EINVAL;
++ goto err;
++ }
++
++ switch (var->nonstd) {
++ case OMAPFB_COLOR_YUV422:
++ case OMAPFB_COLOR_YUY422:
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++ screen_width = fix->line_length
++ / (var->bits_per_pixel >> 2);
++ break;
++ }
++ default:
++ screen_width = fix->line_length / (var->bits_per_pixel >> 3);
++ break;
++ }
++
++ ovl->get_overlay_info(ovl, &info);
++
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
++ mirror = 0;
++ else
++ mirror = ofbi->mirror;
++
++ info.paddr = data_start_p;
++ info.vaddr = data_start_v;
++ info.screen_width = screen_width;
++ info.width = xres;
++ info.height = yres;
++ info.color_mode = mode;
++ info.rotation_type = ofbi->rotation_type;
++ info.rotation = rotation;
++ info.mirror = mirror;
++
++ info.pos_x = posx;
++ info.pos_y = posy;
++ info.out_width = outw;
++ info.out_height = outh;
++
++ r = ovl->set_overlay_info(ovl, &info);
++ if (r) {
++ DBG("ovl->setup_overlay_info failed\n");
++ goto err;
++ }
++
++ return 0;
++
++err:
++ DBG("setup_overlay failed\n");
++ return r;
++}
++
++/* apply var to the overlay */
++int omapfb_apply_changes(struct fb_info *fbi, int init)
++{
++ int r = 0;
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct fb_var_screeninfo *var = &fbi->var;
++ struct omap_overlay *ovl;
++ u16 posx, posy;
++ u16 outw, outh;
++ int i;
++
++#ifdef DEBUG
++ if (omapfb_test_pattern)
++ fill_fb(fbi);
++#endif
++
++ for (i = 0; i < ofbi->num_overlays; i++) {
++ ovl = ofbi->overlays[i];
++
++ DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id);
++
++ if (ofbi->region.size == 0) {
++ /* the fb is not available. disable the overlay */
++ omapfb_overlay_enable(ovl, 0);
++ if (!init && ovl->manager)
++ ovl->manager->apply(ovl->manager);
++ continue;
++ }
++
++ if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
++ int rotation = (var->rotate + ofbi->rotation[i]) % 4;
++ if (rotation == FB_ROTATE_CW ||
++ rotation == FB_ROTATE_CCW) {
++ outw = var->yres;
++ outh = var->xres;
++ } else {
++ outw = var->xres;
++ outh = var->yres;
++ }
++ } else {
++ outw = ovl->info.out_width;
++ outh = ovl->info.out_height;
++ }
++
++ if (init) {
++ posx = 0;
++ posy = 0;
++ } else {
++ posx = ovl->info.pos_x;
++ posy = ovl->info.pos_y;
++ }
++
++ r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh);
++ if (r)
++ goto err;
++
++ if (!init && ovl->manager)
++ ovl->manager->apply(ovl->manager);
++ }
++ return 0;
++err:
++ DBG("apply_changes failed\n");
++ return r;
++}
++
++/* checks var and eventually tweaks it to something supported,
++ * DO NOT MODIFY PAR */
++static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
++{
++ int r;
++
++ DBG("check_var(%d)\n", FB2OFB(fbi)->id);
++
++ r = check_fb_var(fbi, var);
++
++ return r;
++}
++
++/* set the video mode according to info->var */
++static int omapfb_set_par(struct fb_info *fbi)
++{
++ int r;
++
++ DBG("set_par(%d)\n", FB2OFB(fbi)->id);
++
++ set_fb_fix(fbi);
++ r = omapfb_apply_changes(fbi, 0);
++
++ return r;
++}
++
++static int omapfb_pan_display(struct fb_var_screeninfo *var,
++ struct fb_info *fbi)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ int r = 0;
++
++ DBG("pan_display(%d)\n", ofbi->id);
++
++ if (var->xoffset != fbi->var.xoffset ||
++ var->yoffset != fbi->var.yoffset) {
++ struct fb_var_screeninfo new_var;
++
++ new_var = fbi->var;
++ new_var.xoffset = var->xoffset;
++ new_var.yoffset = var->yoffset;
++
++ r = check_fb_var(fbi, &new_var);
++
++ if (r == 0) {
++ fbi->var = new_var;
++ set_fb_fix(fbi);
++ r = omapfb_apply_changes(fbi, 0);
++ }
++ }
++
++ return r;
++}
++
++static void mmap_user_open(struct vm_area_struct *vma)
++{
++ struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
++
++ atomic_inc(&ofbi->map_count);
++}
++
++static void mmap_user_close(struct vm_area_struct *vma)
++{
++ struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
++
++ atomic_dec(&ofbi->map_count);
++}
++
++static struct vm_operations_struct mmap_user_ops = {
++ .open = mmap_user_open,
++ .close = mmap_user_close,
++};
++
++static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct fb_fix_screeninfo *fix = &fbi->fix;
++ unsigned long off;
++ unsigned long start;
++ u32 len;
++
++ if (vma->vm_end - vma->vm_start == 0)
++ return 0;
++ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
++ return -EINVAL;
++ off = vma->vm_pgoff << PAGE_SHIFT;
++
++ start = omapfb_get_region_paddr(ofbi);
++ len = fix->smem_len;
++ if (off >= len)
++ return -EINVAL;
++ if ((vma->vm_end - vma->vm_start + off) > len)
++ return -EINVAL;
++
++ off += start;
++
++ DBG("user mmap region start %lx, len %d, off %lx\n", start, len, off);
++
++ vma->vm_pgoff = off >> PAGE_SHIFT;
++ vma->vm_flags |= VM_IO | VM_RESERVED;
++ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
++ vma->vm_ops = &mmap_user_ops;
++ vma->vm_private_data = ofbi;
++ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
++ vma->vm_end - vma->vm_start, vma->vm_page_prot))
++ return -EAGAIN;
++ /* vm_ops.open won't be called for mmap itself. */
++ atomic_inc(&ofbi->map_count);
++ return 0;
++}
++
++/* Store a single color palette entry into a pseudo palette or the hardware
++ * palette if one is available. For now we support only 16bpp and thus store
++ * the entry only to the pseudo palette.
++ */
++static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
++ u_int blue, u_int transp, int update_hw_pal)
++{
++ /*struct omapfb_info *ofbi = FB2OFB(fbi);*/
++ /*struct omapfb2_device *fbdev = ofbi->fbdev;*/
++ struct fb_var_screeninfo *var = &fbi->var;
++ int r = 0;
++
++ enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */
++
++ /*switch (plane->color_mode) {*/
++ switch (mode) {
++ case OMAPFB_COLOR_YUV422:
++ case OMAPFB_COLOR_YUV420:
++ case OMAPFB_COLOR_YUY422:
++ r = -EINVAL;
++ break;
++ case OMAPFB_COLOR_CLUT_8BPP:
++ case OMAPFB_COLOR_CLUT_4BPP:
++ case OMAPFB_COLOR_CLUT_2BPP:
++ case OMAPFB_COLOR_CLUT_1BPP:
++ /*
++ if (fbdev->ctrl->setcolreg)
++ r = fbdev->ctrl->setcolreg(regno, red, green, blue,
++ transp, update_hw_pal);
++ */
++ /* Fallthrough */
++ r = -EINVAL;
++ break;
++ case OMAPFB_COLOR_RGB565:
++ case OMAPFB_COLOR_RGB444:
++ case OMAPFB_COLOR_RGB24P:
++ case OMAPFB_COLOR_RGB24U:
++ if (r != 0)
++ break;
++
++ if (regno < 0) {
++ r = -EINVAL;
++ break;
++ }
++
++ if (regno < 16) {
++ u16 pal;
++ pal = ((red >> (16 - var->red.length)) <<
++ var->red.offset) |
++ ((green >> (16 - var->green.length)) <<
++ var->green.offset) |
++ (blue >> (16 - var->blue.length));
++ ((u32 *)(fbi->pseudo_palette))[regno] = pal;
++ }
++ break;
++ default:
++ BUG();
++ }
++ return r;
++}
++
++static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
++ u_int transp, struct fb_info *info)
++{
++ DBG("setcolreg\n");
++
++ return _setcolreg(info, regno, red, green, blue, transp, 1);
++}
++
++static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
++{
++ int count, index, r;
++ u16 *red, *green, *blue, *transp;
++ u16 trans = 0xffff;
++
++ DBG("setcmap\n");
++
++ red = cmap->red;
++ green = cmap->green;
++ blue = cmap->blue;
++ transp = cmap->transp;
++ index = cmap->start;
++
++ for (count = 0; count < cmap->len; count++) {
++ if (transp)
++ trans = *transp++;
++ r = _setcolreg(info, index++, *red++, *green++, *blue++, trans,
++ count == cmap->len - 1);
++ if (r != 0)
++ return r;
++ }
++
++ return 0;
++}
++
++static void omapfb_vrfb_suspend_all(struct omapfb2_device *fbdev)
++{
++ int i;
++
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
++
++ if (ofbi->region.vrfb.vaddr[0])
++ omap_vrfb_suspend_ctx(&ofbi->region.vrfb);
++ }
++}
++
++static void omapfb_vrfb_resume_all(struct omapfb2_device *fbdev)
++{
++ int i;
++
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
++
++ if (ofbi->region.vrfb.vaddr[0])
++ omap_vrfb_resume_ctx(&ofbi->region.vrfb);
++ }
++}
++
++static int omapfb_blank(int blank, struct fb_info *fbi)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ struct omap_dss_device *display = fb2display(fbi);
++ int do_update = 0;
++ int r = 0;
++
++ omapfb_lock(fbdev);
++
++ switch (blank) {
++ case FB_BLANK_UNBLANK:
++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED)
++ goto exit;
++
++ omapfb_vrfb_resume_all(fbdev);
++
++ if (display->resume)
++ r = display->resume(display);
++
++ if (r == 0 && display->get_update_mode &&
++ display->get_update_mode(display) ==
++ OMAP_DSS_UPDATE_MANUAL)
++ do_update = 1;
++
++ break;
++
++ case FB_BLANK_NORMAL:
++ /* FB_BLANK_NORMAL could be implemented.
++ * Needs DSS additions. */
++ case FB_BLANK_VSYNC_SUSPEND:
++ case FB_BLANK_HSYNC_SUSPEND:
++ case FB_BLANK_POWERDOWN:
++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
++ goto exit;
++
++ if (display->suspend)
++ r = display->suspend(display);
++
++ omapfb_vrfb_suspend_all(fbdev);
++
++ break;
++
++ default:
++ r = -EINVAL;
++ }
++
++exit:
++ omapfb_unlock(fbdev);
++
++ if (r == 0 && do_update && display->update) {
++ u16 w, h;
++ display->get_resolution(display, &w, &h);
++
++ r = display->update(display, 0, 0, w, h);
++ }
++
++ return r;
++}
++
++#if 0
++/* XXX fb_read and fb_write are needed for VRFB */
++ssize_t omapfb_write(struct fb_info *info, const char __user *buf,
++ size_t count, loff_t *ppos)
++{
++ DBG("omapfb_write %d, %lu\n", count, (unsigned long)*ppos);
++ /* XXX needed for VRFB */
++ return count;
++}
++#endif
++
++static struct fb_ops omapfb_ops = {
++ .owner = THIS_MODULE,
++ .fb_open = omapfb_open,
++ .fb_release = omapfb_release,
++ .fb_fillrect = cfb_fillrect,
++ .fb_copyarea = cfb_copyarea,
++ .fb_imageblit = cfb_imageblit,
++ .fb_blank = omapfb_blank,
++ .fb_ioctl = omapfb_ioctl,
++ .fb_check_var = omapfb_check_var,
++ .fb_set_par = omapfb_set_par,
++ .fb_pan_display = omapfb_pan_display,
++ .fb_mmap = omapfb_mmap,
++ .fb_setcolreg = omapfb_setcolreg,
++ .fb_setcmap = omapfb_setcmap,
++ /*.fb_write = omapfb_write,*/
++};
++
++static void omapfb_free_fbmem(struct fb_info *fbi)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ struct omapfb2_mem_region *rg;
++
++ rg = &ofbi->region;
++
++ if (rg->paddr)
++ if (omap_vram_free(rg->paddr, rg->size))
++ dev_err(fbdev->dev, "VRAM FREE failed\n");
++
++ if (rg->vaddr)
++ iounmap(rg->vaddr);
++
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++ /* unmap the 0 angle rotation */
++ if (rg->vrfb.vaddr[0]) {
++ iounmap(rg->vrfb.vaddr[0]);
++ omap_vrfb_release_ctx(&rg->vrfb);
++ }
++ }
++
++ rg->vaddr = NULL;
++ rg->paddr = 0;
++ rg->alloc = 0;
++ rg->size = 0;
++}
++
++static void clear_fb_info(struct fb_info *fbi)
++{
++ memset(&fbi->var, 0, sizeof(fbi->var));
++ memset(&fbi->fix, 0, sizeof(fbi->fix));
++ strlcpy(fbi->fix.id, MODULE_NAME, sizeof(fbi->fix.id));
++}
++
++static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev)
++{
++ int i;
++
++ DBG("free all fbmem\n");
++
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ struct fb_info *fbi = fbdev->fbs[i];
++ omapfb_free_fbmem(fbi);
++ clear_fb_info(fbi);
++ }
++
++ return 0;
++}
++
++static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
++ unsigned long paddr)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ struct omapfb2_mem_region *rg;
++ void __iomem *vaddr;
++ int r;
++
++ rg = &ofbi->region;
++ memset(rg, 0, sizeof(*rg));
++
++ size = PAGE_ALIGN(size);
++
++ if (!paddr) {
++ DBG("allocating %lu bytes for fb %d\n", size, ofbi->id);
++ r = omap_vram_alloc(OMAP_VRAM_MEMTYPE_SDRAM, size, &paddr);
++ } else {
++ DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr,
++ ofbi->id);
++ r = omap_vram_reserve(paddr, size);
++ }
++
++ if (r) {
++ dev_err(fbdev->dev, "failed to allocate framebuffer\n");
++ return -ENOMEM;
++ }
++
++ if (ofbi->rotation_type != OMAP_DSS_ROT_VRFB) {
++ vaddr = ioremap_wc(paddr, size);
++
++ if (!vaddr) {
++ dev_err(fbdev->dev, "failed to ioremap framebuffer\n");
++ omap_vram_free(paddr, size);
++ return -ENOMEM;
++ }
++
++ DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr);
++ } else {
++ void __iomem *va;
++
++ r = omap_vrfb_request_ctx(&rg->vrfb);
++ if (r) {
++ dev_err(fbdev->dev, "vrfb create ctx failed\n");
++ return r;
++ }
++
++ /* only ioremap the 0 angle view */
++ va = ioremap_wc(rg->vrfb.paddr[0], size);
++
++ if (!va) {
++ printk(KERN_ERR "vrfb: ioremap failed\n");
++ omap_vrfb_release_ctx(&rg->vrfb);
++ return -ENOMEM;
++ }
++
++ DBG("ioremapped vrfb area 0 to %p\n", va);
++
++ rg->vrfb.vaddr[0] = va;
++
++ vaddr = NULL;
++ }
++
++ rg->paddr = paddr;
++ rg->vaddr = vaddr;
++ rg->size = size;
++ rg->alloc = 1;
++
++ return 0;
++}
++
++/* allocate fbmem using display resolution as reference */
++static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
++ unsigned long paddr)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omap_dss_device *display;
++ int bytespp;
++
++ display = fb2display(fbi);
++
++ if (!display)
++ return 0;
++
++ switch (display->get_recommended_bpp(display)) {
++ case 16:
++ bytespp = 2;
++ break;
++ case 24:
++ bytespp = 4;
++ break;
++ default:
++ bytespp = 4;
++ break;
++ }
++
++ if (!size) {
++ u16 w, h;
++
++ display->get_resolution(display, &w, &h);
++
++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++#ifdef DEBUG
++ int oldw = w, oldh = h;
++#endif
++
++ omap_vrfb_adjust_size(&w, &h, bytespp);
++
++ /* Because we change the resolution of the 0 degree
++ * view, we need to alloc max(w, h) for height */
++ h = max(w, h);
++ w = OMAP_VRFB_LINE_LEN;
++
++ DBG("adjusting fb mem size for VRFB, %dx%d -> %dx%d\n",
++ oldw, oldh, w, h);
++ }
++
++ size = w * h * bytespp;
++ }
++
++ if (!size)
++ return 0;
++
++ return omapfb_alloc_fbmem(fbi, size, paddr);
++}
++
++static enum omap_color_mode fb_format_to_dss_mode(enum omapfb_color_format fmt)
++{
++ enum omap_color_mode mode;
++
++ switch (fmt) {
++ case OMAPFB_COLOR_RGB565:
++ mode = OMAP_DSS_COLOR_RGB16;
++ break;
++ case OMAPFB_COLOR_YUV422:
++ mode = OMAP_DSS_COLOR_YUV2;
++ break;
++ case OMAPFB_COLOR_CLUT_8BPP:
++ mode = OMAP_DSS_COLOR_CLUT8;
++ break;
++ case OMAPFB_COLOR_CLUT_4BPP:
++ mode = OMAP_DSS_COLOR_CLUT4;
++ break;
++ case OMAPFB_COLOR_CLUT_2BPP:
++ mode = OMAP_DSS_COLOR_CLUT2;
++ break;
++ case OMAPFB_COLOR_CLUT_1BPP:
++ mode = OMAP_DSS_COLOR_CLUT1;
++ break;
++ case OMAPFB_COLOR_RGB444:
++ mode = OMAP_DSS_COLOR_RGB12U;
++ break;
++ case OMAPFB_COLOR_YUY422:
++ mode = OMAP_DSS_COLOR_UYVY;
++ break;
++ case OMAPFB_COLOR_ARGB16:
++ mode = OMAP_DSS_COLOR_ARGB16;
++ break;
++ case OMAPFB_COLOR_RGB24U:
++ mode = OMAP_DSS_COLOR_RGB24U;
++ break;
++ case OMAPFB_COLOR_RGB24P:
++ mode = OMAP_DSS_COLOR_RGB24P;
++ break;
++ case OMAPFB_COLOR_ARGB32:
++ mode = OMAP_DSS_COLOR_ARGB32;
++ break;
++ case OMAPFB_COLOR_RGBA32:
++ mode = OMAP_DSS_COLOR_RGBA32;
++ break;
++ case OMAPFB_COLOR_RGBX32:
++ mode = OMAP_DSS_COLOR_RGBX32;
++ break;
++ default:
++ mode = -EINVAL;
++ }
++
++ return mode;
++}
++
++static int omapfb_parse_vram_param(const char *param, int max_entries,
++ unsigned long *sizes, unsigned long *paddrs)
++{
++ int fbnum;
++ unsigned long size;
++ unsigned long paddr = 0;
++ char *p, *start;
++
++ start = (char *)param;
++
++ while (1) {
++ p = start;
++
++ fbnum = simple_strtoul(p, &p, 10);
++
++ if (p == param)
++ return -EINVAL;
++
++ if (*p != ':')
++ return -EINVAL;
++
++ if (fbnum >= max_entries)
++ return -EINVAL;
++
++ size = memparse(p + 1, &p);
++
++ if (!size)
++ return -EINVAL;
++
++ paddr = 0;
++
++ if (*p == '@') {
++ paddr = simple_strtoul(p + 1, &p, 16);
++
++ if (!paddr)
++ return -EINVAL;
++
++ }
++
++ paddrs[fbnum] = paddr;
++ sizes[fbnum] = size;
++
++ if (*p == 0)
++ break;
++
++ if (*p != ',')
++ return -EINVAL;
++
++ ++p;
++
++ start = p;
++ }
++
++ return 0;
++}
++
++static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
++{
++ int i, r;
++ unsigned long vram_sizes[10];
++ unsigned long vram_paddrs[10];
++
++ memset(&vram_sizes, 0, sizeof(vram_sizes));
++ memset(&vram_paddrs, 0, sizeof(vram_paddrs));
++
++ if (def_vram && omapfb_parse_vram_param(def_vram, 10,
++ vram_sizes, vram_paddrs)) {
++ dev_err(fbdev->dev, "failed to parse vram parameter\n");
++
++ memset(&vram_sizes, 0, sizeof(vram_sizes));
++ memset(&vram_paddrs, 0, sizeof(vram_paddrs));
++ }
++
++ if (fbdev->dev->platform_data) {
++ struct omapfb_platform_data *opd;
++ opd = fbdev->dev->platform_data;
++ for (i = 0; i < opd->mem_desc.region_cnt; ++i) {
++ if (!vram_sizes[i]) {
++ unsigned long size;
++ unsigned long paddr;
++
++ size = opd->mem_desc.region[i].size;
++ paddr = opd->mem_desc.region[i].paddr;
++
++ vram_sizes[i] = size;
++ vram_paddrs[i] = paddr;
++ }
++ }
++ }
++
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ /* allocate memory automatically only for fb0, or if
++ * excplicitly defined with vram or plat data option */
++ if (i == 0 || vram_sizes[i] != 0) {
++ r = omapfb_alloc_fbmem_display(fbdev->fbs[i],
++ vram_sizes[i], vram_paddrs[i]);
++
++ if (r)
++ return r;
++ }
++ }
++
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
++ struct omapfb2_mem_region *rg;
++ rg = &ofbi->region;
++
++ DBG("region%d phys %08x virt %p size=%lu\n",
++ i,
++ rg->paddr,
++ rg->vaddr,
++ rg->size);
++ }
++
++ return 0;
++}
++
++int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ struct omap_dss_device *display = fb2display(fbi);
++ struct omapfb2_mem_region *rg = &ofbi->region;
++ unsigned long old_size = rg->size;
++ unsigned long old_paddr = rg->paddr;
++ int old_type = rg->type;
++ int r;
++
++ if (type > OMAPFB_MEMTYPE_MAX)
++ return -EINVAL;
++
++ size = PAGE_ALIGN(size);
++
++ if (old_size == size && old_type == type)
++ return 0;
++
++ if (display && display->sync)
++ display->sync(display);
++
++ omapfb_free_fbmem(fbi);
++
++ if (size == 0) {
++ clear_fb_info(fbi);
++ return 0;
++ }
++
++ r = omapfb_alloc_fbmem(fbi, size, 0);
++
++ if (r) {
++ if (old_size)
++ omapfb_alloc_fbmem(fbi, old_size, old_paddr);
++
++ if (rg->size == 0)
++ clear_fb_info(fbi);
++
++ return r;
++ }
++
++ if (old_size == size)
++ return 0;
++
++ if (old_size == 0) {
++ DBG("initializing fb %d\n", ofbi->id);
++ r = omapfb_fb_init(fbdev, fbi);
++ if (r) {
++ DBG("omapfb_fb_init failed\n");
++ goto err;
++ }
++ r = omapfb_apply_changes(fbi, 1);
++ if (r) {
++ DBG("omapfb_apply_changes failed\n");
++ goto err;
++ }
++ } else {
++ struct fb_var_screeninfo new_var;
++ memcpy(&new_var, &fbi->var, sizeof(new_var));
++ r = check_fb_var(fbi, &new_var);
++ if (r)
++ goto err;
++ memcpy(&fbi->var, &new_var, sizeof(fbi->var));
++ set_fb_fix(fbi);
++ }
++
++ return 0;
++err:
++ omapfb_free_fbmem(fbi);
++ clear_fb_info(fbi);
++ return r;
++}
++
++/* initialize fb_info, var, fix to something sane based on the display */
++static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
++{
++ struct fb_var_screeninfo *var = &fbi->var;
++ struct omap_dss_device *display = fb2display(fbi);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ int r = 0;
++
++ fbi->fbops = &omapfb_ops;
++ fbi->flags = FBINFO_FLAG_DEFAULT;
++ fbi->pseudo_palette = fbdev->pseudo_palette;
++
++ if (ofbi->region.size == 0) {
++ clear_fb_info(fbi);
++ return 0;
++ }
++
++ var->nonstd = 0;
++ var->bits_per_pixel = 0;
++
++ var->rotate = def_rotate;
++
++ /*
++ * Check if there is a default color format set in the board file,
++ * and use this format instead the default deducted from the
++ * display bpp.
++ */
++ if (fbdev->dev->platform_data) {
++ struct omapfb_platform_data *opd;
++ int id = ofbi->id;
++
++ opd = fbdev->dev->platform_data;
++ if (opd->mem_desc.region[id].format_used) {
++ enum omap_color_mode mode;
++ enum omapfb_color_format format;
++
++ format = opd->mem_desc.region[id].format;
++ mode = fb_format_to_dss_mode(format);
++ if (mode < 0) {
++ r = mode;
++ goto err;
++ }
++ r = dss_mode_to_fb_mode(mode, var);
++ if (r < 0)
++ goto err;
++ }
++ }
++
++ if (display) {
++ u16 w, h;
++ int rotation = (var->rotate + ofbi->rotation[0]) % 4;
++
++ display->get_resolution(display, &w, &h);
++
++ if (rotation == FB_ROTATE_CW ||
++ rotation == FB_ROTATE_CCW) {
++ var->xres = h;
++ var->yres = w;
++ } else {
++ var->xres = w;
++ var->yres = h;
++ }
++
++ var->xres_virtual = var->xres;
++ var->yres_virtual = var->yres;
++
++ if (!var->bits_per_pixel) {
++ switch (display->get_recommended_bpp(display)) {
++ case 16:
++ var->bits_per_pixel = 16;
++ break;
++ case 24:
++ var->bits_per_pixel = 32;
++ break;
++ default:
++ dev_err(fbdev->dev, "illegal display "
++ "bpp\n");
++ return -EINVAL;
++ }
++ }
++ } else {
++ /* if there's no display, let's just guess some basic values */
++ var->xres = 320;
++ var->yres = 240;
++ var->xres_virtual = var->xres;
++ var->yres_virtual = var->yres;
++ if (!var->bits_per_pixel)
++ var->bits_per_pixel = 16;
++ }
++
++ r = check_fb_var(fbi, var);
++ if (r)
++ goto err;
++
++ set_fb_fix(fbi);
++
++ r = fb_alloc_cmap(&fbi->cmap, 256, 0);
++ if (r)
++ dev_err(fbdev->dev, "unable to allocate color map memory\n");
++
++err:
++ return r;
++}
++
++static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi)
++{
++ fb_dealloc_cmap(&fbi->cmap);
++}
++
++
++static void omapfb_free_resources(struct omapfb2_device *fbdev)
++{
++ int i;
++
++ DBG("free_resources\n");
++
++ if (fbdev == NULL)
++ return;
++
++ for (i = 0; i < fbdev->num_fbs; i++)
++ unregister_framebuffer(fbdev->fbs[i]);
++
++ /* free the reserved fbmem */
++ omapfb_free_all_fbmem(fbdev);
++
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ fbinfo_cleanup(fbdev, fbdev->fbs[i]);
++ framebuffer_release(fbdev->fbs[i]);
++ }
++
++ for (i = 0; i < fbdev->num_displays; i++) {
++ if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED)
++ fbdev->displays[i]->disable(fbdev->displays[i]);
++
++ omap_dss_put_device(fbdev->displays[i]);
++ }
++
++ dev_set_drvdata(fbdev->dev, NULL);
++ kfree(fbdev);
++}
++
++static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
++{
++ int r, i;
++
++ fbdev->num_fbs = 0;
++
++ DBG("create %d framebuffers\n", CONFIG_FB_OMAP2_NUM_FBS);
++
++ /* allocate fb_infos */
++ for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) {
++ struct fb_info *fbi;
++ struct omapfb_info *ofbi;
++
++ fbi = framebuffer_alloc(sizeof(struct omapfb_info),
++ fbdev->dev);
++
++ if (fbi == NULL) {
++ dev_err(fbdev->dev,
++ "unable to allocate memory for plane info\n");
++ return -ENOMEM;
++ }
++
++ clear_fb_info(fbi);
++
++ fbdev->fbs[i] = fbi;
++
++ ofbi = FB2OFB(fbi);
++ ofbi->fbdev = fbdev;
++ ofbi->id = i;
++
++ /* assign these early, so that fb alloc can use them */
++ ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB :
++ OMAP_DSS_ROT_DMA;
++ ofbi->mirror = def_mirror;
++
++ fbdev->num_fbs++;
++ }
++
++ DBG("fb_infos allocated\n");
++
++ /* assign overlays for the fbs */
++ for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) {
++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
++
++ ofbi->overlays[0] = fbdev->overlays[i];
++ ofbi->num_overlays = 1;
++ }
++
++ /* allocate fb memories */
++ r = omapfb_allocate_all_fbs(fbdev);
++ if (r) {
++ dev_err(fbdev->dev, "failed to allocate fbmem\n");
++ return r;
++ }
++
++ DBG("fbmems allocated\n");
++
++ /* setup fb_infos */
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ r = omapfb_fb_init(fbdev, fbdev->fbs[i]);
++ if (r) {
++ dev_err(fbdev->dev, "failed to setup fb_info\n");
++ return r;
++ }
++ }
++
++ DBG("fb_infos initialized\n");
++
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ r = register_framebuffer(fbdev->fbs[i]);
++ if (r != 0) {
++ dev_err(fbdev->dev,
++ "registering framebuffer %d failed\n", i);
++ return r;
++ }
++ }
++
++ DBG("framebuffers registered\n");
++
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ r = omapfb_apply_changes(fbdev->fbs[i], 1);
++ if (r) {
++ dev_err(fbdev->dev, "failed to change mode\n");
++ return r;
++ }
++ }
++
++ DBG("create sysfs for fbs\n");
++ r = omapfb_create_sysfs(fbdev);
++ if (r) {
++ dev_err(fbdev->dev, "failed to create sysfs entries\n");
++ return r;
++ }
++
++ /* Enable fb0 */
++ if (fbdev->num_fbs > 0) {
++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
++
++ if (ofbi->num_overlays > 0) {
++ struct omap_overlay *ovl = ofbi->overlays[0];
++
++ r = omapfb_overlay_enable(ovl, 1);
++
++ if (r) {
++ dev_err(fbdev->dev,
++ "failed to enable overlay\n");
++ return r;
++ }
++ }
++ }
++
++ DBG("create_framebuffers done\n");
++
++ return 0;
++}
++
++static int omapfb_mode_to_timings(const char *mode_str,
++ struct omap_video_timings *timings, u8 *bpp)
++{
++ struct fb_info fbi;
++ struct fb_var_screeninfo var;
++ struct fb_ops fbops;
++ int r;
++
++#ifdef CONFIG_OMAP2_DSS_VENC
++ if (strcmp(mode_str, "pal") == 0) {
++ *timings = omap_dss_pal_timings;
++ *bpp = 0;
++ return 0;
++ } else if (strcmp(mode_str, "ntsc") == 0) {
++ *timings = omap_dss_ntsc_timings;
++ *bpp = 0;
++ return 0;
++ }
++#endif
++
++ /* this is quite a hack, but I wanted to use the modedb and for
++ * that we need fb_info and var, so we create dummy ones */
++
++ memset(&fbi, 0, sizeof(fbi));
++ memset(&var, 0, sizeof(var));
++ memset(&fbops, 0, sizeof(fbops));
++ fbi.fbops = &fbops;
++
++ r = fb_find_mode(&var, &fbi, mode_str, NULL, 0, NULL, 24);
++
++ if (r != 0) {
++ timings->pixel_clock = PICOS2KHZ(var.pixclock);
++ timings->hfp = var.left_margin;
++ timings->hbp = var.right_margin;
++ timings->vfp = var.upper_margin;
++ timings->vbp = var.lower_margin;
++ timings->hsw = var.hsync_len;
++ timings->vsw = var.vsync_len;
++ timings->x_res = var.xres;
++ timings->y_res = var.yres;
++
++ switch (var.bits_per_pixel) {
++ case 16:
++ *bpp = 16;
++ break;
++ case 24:
++ case 32:
++ default:
++ *bpp = 24;
++ break;
++ }
++
++ return 0;
++ } else {
++ return -EINVAL;
++ }
++}
++
++static int omapfb_set_def_mode(struct omap_dss_device *display, char *mode_str)
++{
++ int r;
++ u8 bpp;
++ struct omap_video_timings timings;
++
++ r = omapfb_mode_to_timings(mode_str, &timings, &bpp);
++ if (r)
++ return r;
++
++ display->panel.recommended_bpp = bpp;
++
++ if (!display->check_timings || !display->set_timings)
++ return -EINVAL;
++
++ r = display->check_timings(display, &timings);
++ if (r)
++ return r;
++
++ display->set_timings(display, &timings);
++
++ return 0;
++}
++
++static int omapfb_parse_def_modes(struct omapfb2_device *fbdev)
++{
++ char *str, *options, *this_opt;
++ int r = 0;
++
++ str = kmalloc(strlen(def_mode) + 1, GFP_KERNEL);
++ strcpy(str, def_mode);
++ options = str;
++
++ while (!r && (this_opt = strsep(&options, ",")) != NULL) {
++ char *p, *display_str, *mode_str;
++ struct omap_dss_device *display;
++ int i;
++
++ p = strchr(this_opt, ':');
++ if (!p) {
++ r = -EINVAL;
++ break;
++ }
++
++ *p = 0;
++ display_str = this_opt;
++ mode_str = p + 1;
++
++ display = NULL;
++ for (i = 0; i < fbdev->num_displays; ++i) {
++ if (strcmp(fbdev->displays[i]->name,
++ display_str) == 0) {
++ display = fbdev->displays[i];
++ break;
++ }
++ }
++
++ if (!display) {
++ r = -EINVAL;
++ break;
++ }
++
++ r = omapfb_set_def_mode(display, mode_str);
++ if (r)
++ break;
++ }
++
++ kfree(str);
++
++ return r;
++}
++
++static int omapfb_probe(struct platform_device *pdev)
++{
++ struct omapfb2_device *fbdev = NULL;
++ int r = 0;
++ int i;
++ struct omap_overlay *ovl;
++ struct omap_dss_device *def_display;
++ struct omap_dss_device *dssdev;
++
++ DBG("omapfb_probe\n");
++
++ if (pdev->num_resources != 0) {
++ dev_err(&pdev->dev, "probed for an unknown device\n");
++ r = -ENODEV;
++ goto err0;
++ }
++
++ fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL);
++ if (fbdev == NULL) {
++ r = -ENOMEM;
++ goto err0;
++ }
++
++ mutex_init(&fbdev->mtx);
++
++ fbdev->dev = &pdev->dev;
++ platform_set_drvdata(pdev, fbdev);
++
++ fbdev->num_displays = 0;
++ dssdev = NULL;
++ for_each_dss_dev(dssdev) {
++ omap_dss_get_device(dssdev);
++ fbdev->displays[fbdev->num_displays++] = dssdev;
++ }
++
++ if (fbdev->num_displays == 0) {
++ dev_err(&pdev->dev, "no displays\n");
++ r = -EINVAL;
++ goto cleanup;
++ }
++
++ fbdev->num_overlays = omap_dss_get_num_overlays();
++ for (i = 0; i < fbdev->num_overlays; i++)
++ fbdev->overlays[i] = omap_dss_get_overlay(i);
++
++ fbdev->num_managers = omap_dss_get_num_overlay_managers();
++ for (i = 0; i < fbdev->num_managers; i++)
++ fbdev->managers[i] = omap_dss_get_overlay_manager(i);
++
++ if (def_mode && strlen(def_mode) > 0) {
++ if (omapfb_parse_def_modes(fbdev))
++ dev_warn(&pdev->dev, "cannot parse default modes\n");
++ }
++
++ r = omapfb_create_framebuffers(fbdev);
++ if (r)
++ goto cleanup;
++
++ for (i = 0; i < fbdev->num_managers; i++) {
++ struct omap_overlay_manager *mgr;
++ mgr = fbdev->managers[i];
++ r = mgr->apply(mgr);
++ if (r)
++ dev_warn(fbdev->dev, "failed to apply dispc config\n");
++ }
++
++ DBG("mgr->apply'ed\n");
++
++ /* gfx overlay should be the default one. find a display
++ * connected to that, and use it as default display */
++ ovl = omap_dss_get_overlay(0);
++ if (ovl->manager && ovl->manager->device) {
++ def_display = ovl->manager->device;
++ } else {
++ dev_warn(&pdev->dev, "cannot find default display\n");
++ def_display = NULL;
++ }
++
++ if (def_display) {
++ u16 w, h;
++ r = def_display->enable(def_display);
++ if (r)
++ dev_warn(fbdev->dev, "Failed to enable display '%s'\n",
++ def_display->name);
++
++ /* set the update mode */
++ if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
++#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
++ if (def_display->enable_te)
++ def_display->enable_te(def_display, 1);
++ if (def_display->set_update_mode)
++ def_display->set_update_mode(def_display,
++ OMAP_DSS_UPDATE_AUTO);
++#else /* MANUAL_UPDATE */
++ if (def_display->enable_te)
++ def_display->enable_te(def_display, 0);
++ if (def_display->set_update_mode)
++ def_display->set_update_mode(def_display,
++ OMAP_DSS_UPDATE_MANUAL);
++
++ def_display->get_resolution(def_display, &w, &h);
++ def_display->update(def_display, 0, 0, w, h);
++#endif
++ } else {
++ if (def_display->set_update_mode)
++ def_display->set_update_mode(def_display,
++ OMAP_DSS_UPDATE_AUTO);
++ }
++ }
++
++ return 0;
++
++cleanup:
++ omapfb_free_resources(fbdev);
++err0:
++ dev_err(&pdev->dev, "failed to setup omapfb\n");
++ return r;
++}
++
++static int omapfb_remove(struct platform_device *pdev)
++{
++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
++
++ /* FIXME: wait till completion of pending events */
++
++ omapfb_remove_sysfs(fbdev);
++
++ omapfb_free_resources(fbdev);
++
++ return 0;
++}
++
++static struct platform_driver omapfb_driver = {
++ .probe = omapfb_probe,
++ .remove = omapfb_remove,
++ .driver = {
++ .name = "omapfb",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init omapfb_init(void)
++{
++ DBG("omapfb_init\n");
++
++ if (platform_driver_register(&omapfb_driver)) {
++ printk(KERN_ERR "failed to register omapfb driver\n");
++ return -ENODEV;
++ }
++
++ return 0;
++}
++
++static void __exit omapfb_exit(void)
++{
++ DBG("omapfb_exit\n");
++ platform_driver_unregister(&omapfb_driver);
++}
++
++module_param_named(mode, def_mode, charp, 0);
++module_param_named(vram, def_vram, charp, 0);
++module_param_named(rotate, def_rotate, int, 0);
++module_param_named(vrfb, def_vrfb, bool, 0);
++module_param_named(mirror, def_mirror, bool, 0);
++
++/* late_initcall to let panel/ctrl drivers loaded first.
++ * I guess better option would be a more dynamic approach,
++ * so that omapfb reacts to new panels when they are loaded */
++late_initcall(omapfb_init);
++/*module_init(omapfb_init);*/
++module_exit(omapfb_exit);
++
++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
++MODULE_DESCRIPTION("OMAP2/3 Framebuffer");
++MODULE_LICENSE("GPL v2");
+diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
+new file mode 100644
+index 0000000..ef30e0e
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
+@@ -0,0 +1,507 @@
++/*
++ * linux/drivers/video/omap2/omapfb-sysfs.c
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/fb.h>
++#include <linux/sysfs.h>
++#include <linux/device.h>
++#include <linux/uaccess.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/omapfb.h>
++
++#include <mach/display.h>
++#include <mach/vrfb.h>
++
++#include "omapfb.h"
++
++static ssize_t show_rotate_type(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++
++ return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->rotation_type);
++}
++
++static ssize_t store_rotate_type(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ enum omap_dss_rotation_type rot_type;
++ int r;
++
++ rot_type = simple_strtoul(buf, NULL, 0);
++
++ if (rot_type != OMAP_DSS_ROT_DMA && rot_type != OMAP_DSS_ROT_VRFB)
++ return -EINVAL;
++
++ lock_fb_info(fbi);
++
++ r = 0;
++ if (rot_type == ofbi->rotation_type)
++ goto out;
++
++ if (ofbi->region.size) {
++ r = -EBUSY;
++ goto out;
++ }
++
++ ofbi->rotation_type = rot_type;
++
++ /*
++ * Since the VRAM for this FB is not allocated at the moment we don't
++ * need to do any further parameter checking at this point.
++ */
++out:
++ unlock_fb_info(fbi);
++
++ return r ? r : count;
++}
++
++
++static ssize_t show_mirror(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++
++ return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->mirror);
++}
++
++static ssize_t store_mirror(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ bool mirror;
++ int r;
++ struct fb_var_screeninfo new_var;
++
++ mirror = simple_strtoul(buf, NULL, 0);
++
++ if (mirror != 0 && mirror != 1)
++ return -EINVAL;
++
++ lock_fb_info(fbi);
++
++ ofbi->mirror = mirror;
++
++ memcpy(&new_var, &fbi->var, sizeof(new_var));
++ r = check_fb_var(fbi, &new_var);
++ if (r)
++ goto out;
++ memcpy(&fbi->var, &new_var, sizeof(fbi->var));
++
++ set_fb_fix(fbi);
++
++ r = omapfb_apply_changes(fbi, 0);
++ if (r)
++ goto out;
++
++ r = count;
++out:
++ unlock_fb_info(fbi);
++
++ return r;
++}
++
++static ssize_t show_overlays(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ ssize_t l = 0;
++ int t;
++
++ omapfb_lock(fbdev);
++ lock_fb_info(fbi);
++
++ for (t = 0; t < ofbi->num_overlays; t++) {
++ struct omap_overlay *ovl = ofbi->overlays[t];
++ int ovlnum;
++
++ for (ovlnum = 0; ovlnum < fbdev->num_overlays; ++ovlnum)
++ if (ovl == fbdev->overlays[ovlnum])
++ break;
++
++ l += snprintf(buf + l, PAGE_SIZE - l, "%s%d",
++ t == 0 ? "" : ",", ovlnum);
++ }
++
++ l += snprintf(buf + l, PAGE_SIZE - l, "\n");
++
++ unlock_fb_info(fbi);
++ omapfb_unlock(fbdev);
++
++ return l;
++}
++
++static struct omapfb_info *get_overlay_fb(struct omapfb2_device *fbdev,
++ struct omap_overlay *ovl)
++{
++ int i, t;
++
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
++
++ for (t = 0; t < ofbi->num_overlays; t++) {
++ if (ofbi->overlays[t] == ovl)
++ return ofbi;
++ }
++ }
++
++ return NULL;
++}
++
++static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ struct omapfb2_device *fbdev = ofbi->fbdev;
++ struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB];
++ struct omap_overlay *ovl;
++ int num_ovls, r, i;
++ int len;
++ bool added = false;
++
++ num_ovls = 0;
++
++ len = strlen(buf);
++ if (buf[len - 1] == '\n')
++ len = len - 1;
++
++ omapfb_lock(fbdev);
++ lock_fb_info(fbi);
++
++ if (len > 0) {
++ char *p = (char *)buf;
++ int ovlnum;
++
++ while (p < buf + len) {
++ int found;
++ if (num_ovls == OMAPFB_MAX_OVL_PER_FB) {
++ r = -EINVAL;
++ goto out;
++ }
++
++ ovlnum = simple_strtoul(p, &p, 0);
++ if (ovlnum > fbdev->num_overlays) {
++ r = -EINVAL;
++ goto out;
++ }
++
++ found = 0;
++ for (i = 0; i < num_ovls; ++i) {
++ if (ovls[i] == fbdev->overlays[ovlnum]) {
++ found = 1;
++ break;
++ }
++ }
++
++ if (!found)
++ ovls[num_ovls++] = fbdev->overlays[ovlnum];
++
++ p++;
++ }
++ }
++
++ for (i = 0; i < num_ovls; ++i) {
++ struct omapfb_info *ofbi2 = get_overlay_fb(fbdev, ovls[i]);
++ if (ofbi2 && ofbi2 != ofbi) {
++ dev_err(fbdev->dev, "overlay already in use\n");
++ r = -EINVAL;
++ goto out;
++ }
++ }
++
++ /* detach unused overlays */
++ for (i = 0; i < ofbi->num_overlays; ++i) {
++ int t, found;
++
++ ovl = ofbi->overlays[i];
++
++ found = 0;
++
++ for (t = 0; t < num_ovls; ++t) {
++ if (ovl == ovls[t]) {
++ found = 1;
++ break;
++ }
++ }
++
++ if (found)
++ continue;
++
++ DBG("detaching %d\n", ofbi->overlays[i]->id);
++
++ omapfb_overlay_enable(ovl, 0);
++
++ if (ovl->manager)
++ ovl->manager->apply(ovl->manager);
++
++ for (t = i + 1; t < ofbi->num_overlays; t++) {
++ ofbi->rotation[t-1] = ofbi->rotation[t];
++ ofbi->overlays[t-1] = ofbi->overlays[t];
++ }
++
++ ofbi->num_overlays--;
++ i--;
++ }
++
++ for (i = 0; i < num_ovls; ++i) {
++ int t, found;
++
++ ovl = ovls[i];
++
++ found = 0;
++
++ for (t = 0; t < ofbi->num_overlays; ++t) {
++ if (ovl == ofbi->overlays[t]) {
++ found = 1;
++ break;
++ }
++ }
++
++ if (found)
++ continue;
++ ofbi->rotation[ofbi->num_overlays] = 0;
++ ofbi->overlays[ofbi->num_overlays++] = ovl;
++
++ added = true;
++ }
++
++ if (added) {
++ r = omapfb_apply_changes(fbi, 0);
++ if (r)
++ goto out;
++ }
++
++ r = count;
++out:
++ unlock_fb_info(fbi);
++ omapfb_unlock(fbdev);
++
++ return r;
++}
++
++static ssize_t show_overlays_rotate(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ ssize_t l = 0;
++ int t;
++
++ lock_fb_info(fbi);
++
++ for (t = 0; t < ofbi->num_overlays; t++) {
++ l += snprintf(buf + l, PAGE_SIZE - l, "%s%d",
++ t == 0 ? "" : ",", ofbi->rotation[t]);
++ }
++
++ l += snprintf(buf + l, PAGE_SIZE - l, "\n");
++
++ unlock_fb_info(fbi);
++
++ return l;
++}
++
++static ssize_t store_overlays_rotate(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ int num_ovls = 0, r, i;
++ int len;
++ bool changed = false;
++ u8 rotation[OMAPFB_MAX_OVL_PER_FB];
++
++ len = strlen(buf);
++ if (buf[len - 1] == '\n')
++ len = len - 1;
++
++ lock_fb_info(fbi);
++
++ if (len > 0) {
++ char *p = (char *)buf;
++
++ while (p < buf + len) {
++ int rot;
++
++ if (num_ovls == ofbi->num_overlays) {
++ r = -EINVAL;
++ goto out;
++ }
++
++ rot = simple_strtoul(p, &p, 0);
++ if (rot < 0 || rot > 3) {
++ r = -EINVAL;
++ goto out;
++ }
++
++ if (ofbi->rotation[num_ovls] != rot)
++ changed = true;
++
++ rotation[num_ovls++] = rot;
++
++ p++;
++ }
++ }
++
++ if (num_ovls != ofbi->num_overlays) {
++ r = -EINVAL;
++ goto out;
++ }
++
++ if (changed) {
++ for (i = 0; i < num_ovls; ++i)
++ ofbi->rotation[i] = rotation[i];
++
++ r = omapfb_apply_changes(fbi, 0);
++ if (r)
++ goto out;
++
++ /* FIXME error handling? */
++ }
++
++ r = count;
++out:
++ unlock_fb_info(fbi);
++
++ return r;
++}
++
++static ssize_t show_size(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++
++ return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size);
++}
++
++static ssize_t store_size(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ unsigned long size;
++ int r;
++ int i;
++
++ size = PAGE_ALIGN(simple_strtoul(buf, NULL, 0));
++
++ lock_fb_info(fbi);
++
++ for (i = 0; i < ofbi->num_overlays; i++) {
++ if (ofbi->overlays[i]->info.enabled) {
++ r = -EBUSY;
++ goto out;
++ }
++ }
++
++ if (size != ofbi->region.size) {
++ r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type);
++ if (r) {
++ dev_err(dev, "realloc fbmem failed\n");
++ goto out;
++ }
++ }
++
++ r = count;
++out:
++ unlock_fb_info(fbi);
++
++ return r;
++}
++
++static ssize_t show_phys(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++
++ return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr);
++}
++
++static ssize_t show_virt(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct fb_info *fbi = dev_get_drvdata(dev);
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++
++ return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr);
++}
++
++static struct device_attribute omapfb_attrs[] = {
++ __ATTR(rotate_type, S_IRUGO | S_IWUSR, show_rotate_type,
++ store_rotate_type),
++ __ATTR(mirror, S_IRUGO | S_IWUSR, show_mirror, store_mirror),
++ __ATTR(size, S_IRUGO | S_IWUSR, show_size, store_size),
++ __ATTR(overlays, S_IRUGO | S_IWUSR, show_overlays, store_overlays),
++ __ATTR(overlays_rotate, S_IRUGO | S_IWUSR, show_overlays_rotate,
++ store_overlays_rotate),
++ __ATTR(phys_addr, S_IRUGO, show_phys, NULL),
++ __ATTR(virt_addr, S_IRUGO, show_virt, NULL),
++};
++
++int omapfb_create_sysfs(struct omapfb2_device *fbdev)
++{
++ int i;
++ int r;
++
++ DBG("create sysfs for fbs\n");
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ int t;
++ for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) {
++ r = device_create_file(fbdev->fbs[i]->dev,
++ &omapfb_attrs[t]);
++
++ if (r) {
++ dev_err(fbdev->dev, "failed to create sysfs "
++ "file\n");
++ return r;
++ }
++ }
++ }
++
++ return 0;
++}
++
++void omapfb_remove_sysfs(struct omapfb2_device *fbdev)
++{
++ int i, t;
++
++ DBG("remove sysfs for fbs\n");
++ for (i = 0; i < fbdev->num_fbs; i++) {
++ for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++)
++ device_remove_file(fbdev->fbs[i]->dev,
++ &omapfb_attrs[t]);
++ }
++}
++
+diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
+new file mode 100644
+index 0000000..d9ee986
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/omapfb.h
+@@ -0,0 +1,146 @@
++/*
++ * linux/drivers/video/omap2/omapfb.h
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__
++#define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__
++
++#ifdef CONFIG_FB_OMAP2_DEBUG_SUPPORT
++#define DEBUG
++#endif
++
++#include <mach/display.h>
++
++#ifdef DEBUG
++extern unsigned int omapfb_debug;
++#define DBG(format, ...) \
++ if (omapfb_debug) \
++ printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__)
++#else
++#define DBG(format, ...)
++#endif
++
++#define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par))
++
++/* max number of overlays to which a framebuffer data can be direct */
++#define OMAPFB_MAX_OVL_PER_FB 3
++
++struct omapfb2_mem_region {
++ u32 paddr;
++ void __iomem *vaddr;
++ struct vrfb vrfb;
++ unsigned long size;
++ u8 type; /* OMAPFB_PLANE_MEM_* */
++ bool alloc; /* allocated by the driver */
++ bool map; /* kernel mapped by the driver */
++};
++
++/* appended to fb_info */
++struct omapfb_info {
++ int id;
++ struct omapfb2_mem_region region;
++ atomic_t map_count;
++ int num_overlays;
++ struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB];
++ struct omapfb2_device *fbdev;
++ enum omap_dss_rotation_type rotation_type;
++ u8 rotation[OMAPFB_MAX_OVL_PER_FB];
++ bool mirror;
++};
++
++struct omapfb2_device {
++ struct device *dev;
++ struct mutex mtx;
++
++ u32 pseudo_palette[17];
++
++ int state;
++
++ unsigned num_fbs;
++ struct fb_info *fbs[10];
++
++ unsigned num_displays;
++ struct omap_dss_device *displays[10];
++ unsigned num_overlays;
++ struct omap_overlay *overlays[10];
++ unsigned num_managers;
++ struct omap_overlay_manager *managers[10];
++};
++
++struct omapfb_colormode {
++ enum omap_color_mode dssmode;
++ u32 bits_per_pixel;
++ u32 nonstd;
++ struct fb_bitfield red;
++ struct fb_bitfield green;
++ struct fb_bitfield blue;
++ struct fb_bitfield transp;
++};
++
++void set_fb_fix(struct fb_info *fbi);
++int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var);
++int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type);
++int omapfb_apply_changes(struct fb_info *fbi, int init);
++
++int omapfb_create_sysfs(struct omapfb2_device *fbdev);
++void omapfb_remove_sysfs(struct omapfb2_device *fbdev);
++
++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg);
++
++int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
++ struct fb_var_screeninfo *var);
++
++/* find the display connected to this fb, if any */
++static inline struct omap_dss_device *fb2display(struct fb_info *fbi)
++{
++ struct omapfb_info *ofbi = FB2OFB(fbi);
++ int i;
++
++ /* XXX: returns the display connected to first attached overlay */
++ for (i = 0; i < ofbi->num_overlays; i++) {
++ if (ofbi->overlays[i]->manager)
++ return ofbi->overlays[i]->manager->device;
++ }
++
++ return NULL;
++}
++
++static inline void omapfb_lock(struct omapfb2_device *fbdev)
++{
++ mutex_lock(&fbdev->mtx);
++}
++
++static inline void omapfb_unlock(struct omapfb2_device *fbdev)
++{
++ mutex_unlock(&fbdev->mtx);
++}
++
++static inline int omapfb_overlay_enable(struct omap_overlay *ovl,
++ int enable)
++{
++ struct omap_overlay_info info;
++
++ ovl->get_overlay_info(ovl, &info);
++ info.enabled = enable;
++ return ovl->set_overlay_info(ovl, &info);
++}
++
++#endif
+diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
+new file mode 100644
+index 0000000..634ce23
+--- /dev/null
++++ b/drivers/video/omap2/vram.c
+@@ -0,0 +1,655 @@
++/*
++ * VRAM manager for OMAP
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/list.h>
++#include <linux/seq_file.h>
++#include <linux/bootmem.h>
++#include <linux/completion.h>
++#include <linux/debugfs.h>
++#include <linux/jiffies.h>
++#include <linux/module.h>
++
++#include <asm/setup.h>
++
++#include <mach/sram.h>
++#include <mach/vram.h>
++#include <mach/dma.h>
++
++#ifdef DEBUG
++#define DBG(format, ...) pr_debug("VRAM: " format, ## __VA_ARGS__)
++#else
++#define DBG(format, ...)
++#endif
++
++#define OMAP2_SRAM_START 0x40200000
++/* Maximum size, in reality this is smaller if SRAM is partially locked. */
++#define OMAP2_SRAM_SIZE 0xa0000 /* 640k */
++
++/* postponed regions are used to temporarily store region information at boot
++ * time when we cannot yet allocate the region list */
++#define MAX_POSTPONED_REGIONS 10
++
++static bool vram_initialized;
++static int postponed_cnt;
++static struct {
++ unsigned long paddr;
++ size_t size;
++} postponed_regions[MAX_POSTPONED_REGIONS];
++
++struct vram_alloc {
++ struct list_head list;
++ unsigned long paddr;
++ unsigned pages;
++};
++
++struct vram_region {
++ struct list_head list;
++ struct list_head alloc_list;
++ unsigned long paddr;
++ unsigned pages;
++};
++
++static DEFINE_MUTEX(region_mutex);
++static LIST_HEAD(region_list);
++
++static inline int region_mem_type(unsigned long paddr)
++{
++ if (paddr >= OMAP2_SRAM_START &&
++ paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
++ return OMAP_VRAM_MEMTYPE_SRAM;
++ else
++ return OMAP_VRAM_MEMTYPE_SDRAM;
++}
++
++static struct vram_region *omap_vram_create_region(unsigned long paddr,
++ unsigned pages)
++{
++ struct vram_region *rm;
++
++ rm = kzalloc(sizeof(*rm), GFP_KERNEL);
++
++ if (rm) {
++ INIT_LIST_HEAD(&rm->alloc_list);
++ rm->paddr = paddr;
++ rm->pages = pages;
++ }
++
++ return rm;
++}
++
++#if 0
++static void omap_vram_free_region(struct vram_region *vr)
++{
++ list_del(&vr->list);
++ kfree(vr);
++}
++#endif
++
++static struct vram_alloc *omap_vram_create_allocation(struct vram_region *vr,
++ unsigned long paddr, unsigned pages)
++{
++ struct vram_alloc *va;
++ struct vram_alloc *new;
++
++ new = kzalloc(sizeof(*va), GFP_KERNEL);
++
++ if (!new)
++ return NULL;
++
++ new->paddr = paddr;
++ new->pages = pages;
++
++ list_for_each_entry(va, &vr->alloc_list, list) {
++ if (va->paddr > new->paddr)
++ break;
++ }
++
++ list_add_tail(&new->list, &va->list);
++
++ return new;
++}
++
++static void omap_vram_free_allocation(struct vram_alloc *va)
++{
++ list_del(&va->list);
++ kfree(va);
++}
++
++int omap_vram_add_region(unsigned long paddr, size_t size)
++{
++ struct vram_region *rm;
++ unsigned pages;
++
++ if (vram_initialized) {
++ DBG("adding region paddr %08lx size %d\n",
++ paddr, size);
++
++ size &= PAGE_MASK;
++ pages = size >> PAGE_SHIFT;
++
++ rm = omap_vram_create_region(paddr, pages);
++ if (rm == NULL)
++ return -ENOMEM;
++
++ list_add(&rm->list, ®ion_list);
++ } else {
++ if (postponed_cnt == MAX_POSTPONED_REGIONS)
++ return -ENOMEM;
++
++ postponed_regions[postponed_cnt].paddr = paddr;
++ postponed_regions[postponed_cnt].size = size;
++
++ ++postponed_cnt;
++ }
++ return 0;
++}
++
++int omap_vram_free(unsigned long paddr, size_t size)
++{
++ struct vram_region *rm;
++ struct vram_alloc *alloc;
++ unsigned start, end;
++
++ DBG("free mem paddr %08lx size %d\n", paddr, size);
++
++ size = PAGE_ALIGN(size);
++
++ mutex_lock(®ion_mutex);
++
++ list_for_each_entry(rm, ®ion_list, list) {
++ list_for_each_entry(alloc, &rm->alloc_list, list) {
++ start = alloc->paddr;
++ end = alloc->paddr + (alloc->pages >> PAGE_SHIFT);
++
++ if (start >= paddr && end < paddr + size)
++ goto found;
++ }
++ }
++
++ mutex_unlock(®ion_mutex);
++ return -EINVAL;
++
++found:
++ omap_vram_free_allocation(alloc);
++
++ mutex_unlock(®ion_mutex);
++ return 0;
++}
++EXPORT_SYMBOL(omap_vram_free);
++
++static int _omap_vram_reserve(unsigned long paddr, unsigned pages)
++{
++ struct vram_region *rm;
++ struct vram_alloc *alloc;
++ size_t size;
++
++ size = pages << PAGE_SHIFT;
++
++ list_for_each_entry(rm, ®ion_list, list) {
++ unsigned long start, end;
++
++ DBG("checking region %lx %d\n", rm->paddr, rm->pages);
++
++ if (region_mem_type(rm->paddr) != region_mem_type(paddr))
++ continue;
++
++ start = rm->paddr;
++ end = start + (rm->pages << PAGE_SHIFT) - 1;
++ if (start > paddr || end < paddr + size - 1)
++ continue;
++
++ DBG("block ok, checking allocs\n");
++
++ list_for_each_entry(alloc, &rm->alloc_list, list) {
++ end = alloc->paddr - 1;
++
++ if (start <= paddr && end >= paddr + size - 1)
++ goto found;
++
++ start = alloc->paddr + (alloc->pages << PAGE_SHIFT);
++ }
++
++ end = rm->paddr + (rm->pages << PAGE_SHIFT) - 1;
++
++ if (!(start <= paddr && end >= paddr + size - 1))
++ continue;
++found:
++ DBG("found area start %lx, end %lx\n", start, end);
++
++ if (omap_vram_create_allocation(rm, paddr, pages) == NULL)
++ return -ENOMEM;
++
++ return 0;
++ }
++
++ return -ENOMEM;
++}
++
++int omap_vram_reserve(unsigned long paddr, size_t size)
++{
++ unsigned pages;
++ int r;
++
++ DBG("reserve mem paddr %08lx size %d\n", paddr, size);
++
++ size = PAGE_ALIGN(size);
++ pages = size >> PAGE_SHIFT;
++
++ mutex_lock(®ion_mutex);
++
++ r = _omap_vram_reserve(paddr, pages);
++
++ mutex_unlock(®ion_mutex);
++
++ return r;
++}
++EXPORT_SYMBOL(omap_vram_reserve);
++
++static void _omap_vram_dma_cb(int lch, u16 ch_status, void *data)
++{
++ struct completion *compl = data;
++ complete(compl);
++}
++
++static int _omap_vram_clear(u32 paddr, unsigned pages)
++{
++ struct completion compl;
++ unsigned elem_count;
++ unsigned frame_count;
++ int r;
++ int lch;
++
++ init_completion(&compl);
++
++ r = omap_request_dma(OMAP_DMA_NO_DEVICE, "VRAM DMA",
++ _omap_vram_dma_cb,
++ &compl, &lch);
++ if (r) {
++ pr_err("VRAM: request_dma failed for memory clear\n");
++ return -EBUSY;
++ }
++
++ elem_count = pages * PAGE_SIZE / 4;
++ frame_count = 1;
++
++ omap_set_dma_transfer_params(lch, OMAP_DMA_DATA_TYPE_S32,
++ elem_count, frame_count,
++ OMAP_DMA_SYNC_ELEMENT,
++ 0, 0);
++
++ omap_set_dma_dest_params(lch, 0, OMAP_DMA_AMODE_POST_INC,
++ paddr, 0, 0);
++
++ omap_set_dma_color_mode(lch, OMAP_DMA_CONSTANT_FILL, 0x000000);
++
++ omap_start_dma(lch);
++
++ if (wait_for_completion_timeout(&compl, msecs_to_jiffies(1000)) == 0) {
++ omap_stop_dma(lch);
++ pr_err("VRAM: dma timeout while clearing memory\n");
++ r = -EIO;
++ goto err;
++ }
++
++ r = 0;
++err:
++ omap_free_dma(lch);
++
++ return r;
++}
++
++static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
++{
++ struct vram_region *rm;
++ struct vram_alloc *alloc;
++
++ list_for_each_entry(rm, ®ion_list, list) {
++ unsigned long start, end;
++
++ DBG("checking region %lx %d\n", rm->paddr, rm->pages);
++
++ if (region_mem_type(rm->paddr) != mtype)
++ continue;
++
++ start = rm->paddr;
++
++ list_for_each_entry(alloc, &rm->alloc_list, list) {
++ end = alloc->paddr;
++
++ if (end - start >= pages << PAGE_SHIFT)
++ goto found;
++
++ start = alloc->paddr + (alloc->pages << PAGE_SHIFT);
++ }
++
++ end = rm->paddr + (rm->pages << PAGE_SHIFT);
++found:
++ if (end - start < pages << PAGE_SHIFT)
++ continue;
++
++ DBG("found %lx, end %lx\n", start, end);
++
++ alloc = omap_vram_create_allocation(rm, start, pages);
++ if (alloc == NULL)
++ return -ENOMEM;
++
++ *paddr = start;
++
++ _omap_vram_clear(start, pages);
++
++ return 0;
++ }
++
++ return -ENOMEM;
++}
++
++int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr)
++{
++ unsigned pages;
++ int r;
++
++ BUG_ON(mtype > OMAP_VRAM_MEMTYPE_MAX || !size);
++
++ DBG("alloc mem type %d size %d\n", mtype, size);
++
++ size = PAGE_ALIGN(size);
++ pages = size >> PAGE_SHIFT;
++
++ mutex_lock(®ion_mutex);
++
++ r = _omap_vram_alloc(mtype, pages, paddr);
++
++ mutex_unlock(®ion_mutex);
++
++ return r;
++}
++EXPORT_SYMBOL(omap_vram_alloc);
++
++void omap_vram_get_info(unsigned long *vram,
++ unsigned long *free_vram,
++ unsigned long *largest_free_block)
++{
++ struct vram_region *vr;
++ struct vram_alloc *va;
++
++ *vram = 0;
++ *free_vram = 0;
++ *largest_free_block = 0;
++
++ mutex_lock(®ion_mutex);
++
++ list_for_each_entry(vr, ®ion_list, list) {
++ unsigned free;
++ unsigned long pa;
++
++ pa = vr->paddr;
++ *vram += vr->pages << PAGE_SHIFT;
++
++ list_for_each_entry(va, &vr->alloc_list, list) {
++ free = va->paddr - pa;
++ *free_vram += free;
++ if (free > *largest_free_block)
++ *largest_free_block = free;
++ pa = va->paddr + (va->pages << PAGE_SHIFT);
++ }
++
++ free = vr->paddr + (vr->pages << PAGE_SHIFT) - pa;
++ *free_vram += free;
++ if (free > *largest_free_block)
++ *largest_free_block = free;
++ }
++
++ mutex_unlock(®ion_mutex);
++}
++EXPORT_SYMBOL(omap_vram_get_info);
++
++#if defined(CONFIG_DEBUG_FS)
++static int vram_debug_show(struct seq_file *s, void *unused)
++{
++ struct vram_region *vr;
++ struct vram_alloc *va;
++ unsigned size;
++
++ mutex_lock(®ion_mutex);
++
++ list_for_each_entry(vr, ®ion_list, list) {
++ size = vr->pages << PAGE_SHIFT;
++ seq_printf(s, "%08lx-%08lx (%d bytes)\n",
++ vr->paddr, vr->paddr + size - 1,
++ size);
++
++ list_for_each_entry(va, &vr->alloc_list, list) {
++ size = va->pages << PAGE_SHIFT;
++ seq_printf(s, " %08lx-%08lx (%d bytes)\n",
++ va->paddr, va->paddr + size - 1,
++ size);
++ }
++ }
++
++ mutex_unlock(®ion_mutex);
++
++ return 0;
++}
++
++static int vram_debug_open(struct inode *inode, struct file *file)
++{
++ return single_open(file, vram_debug_show, inode->i_private);
++}
++
++static const struct file_operations vram_debug_fops = {
++ .open = vram_debug_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++static int __init omap_vram_create_debugfs(void)
++{
++ struct dentry *d;
++
++ d = debugfs_create_file("vram", S_IRUGO, NULL,
++ NULL, &vram_debug_fops);
++ if (IS_ERR(d))
++ return PTR_ERR(d);
++
++ return 0;
++}
++#endif
++
++static __init int omap_vram_init(void)
++{
++ int i;
++
++ vram_initialized = 1;
++
++ for (i = 0; i < postponed_cnt; i++)
++ omap_vram_add_region(postponed_regions[i].paddr,
++ postponed_regions[i].size);
++
++#ifdef CONFIG_DEBUG_FS
++ if (omap_vram_create_debugfs())
++ pr_err("VRAM: Failed to create debugfs file\n");
++#endif
++
++ return 0;
++}
++
++arch_initcall(omap_vram_init);
++
++/* boottime vram alloc stuff */
++
++/* set from board file */
++static u32 omap_vram_sram_start __initdata;
++static u32 omap_vram_sram_size __initdata;
++
++/* set from board file */
++static u32 omap_vram_sdram_start __initdata;
++static u32 omap_vram_sdram_size __initdata;
++
++/* set from kernel cmdline */
++static u32 omap_vram_def_sdram_size __initdata;
++static u32 omap_vram_def_sdram_start __initdata;
++
++static void __init omap_vram_early_vram(char **p)
++{
++ omap_vram_def_sdram_size = memparse(*p, p);
++ if (**p == ',')
++ omap_vram_def_sdram_start = simple_strtoul((*p) + 1, p, 16);
++}
++__early_param("vram=", omap_vram_early_vram);
++
++/*
++ * Called from map_io. We need to call to this early enough so that we
++ * can reserve the fixed SDRAM regions before VM could get hold of them.
++ */
++void __init omap_vram_reserve_sdram(void)
++{
++ struct bootmem_data *bdata;
++ unsigned long sdram_start, sdram_size;
++ u32 paddr;
++ u32 size = 0;
++
++ /* cmdline arg overrides the board file definition */
++ if (omap_vram_def_sdram_size) {
++ size = omap_vram_def_sdram_size;
++ paddr = omap_vram_def_sdram_start;
++ }
++
++ if (!size) {
++ size = omap_vram_sdram_size;
++ paddr = omap_vram_sdram_start;
++ }
++
++#ifdef CONFIG_OMAP2_VRAM_SIZE
++ if (!size) {
++ size = CONFIG_OMAP2_VRAM_SIZE * 1024 * 1024;
++ paddr = 0;
++ }
++#endif
++
++ if (!size)
++ return;
++
++ size = PAGE_ALIGN(size);
++
++ bdata = NODE_DATA(0)->bdata;
++ sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
++ sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
++
++ if (paddr) {
++ if ((paddr & ~PAGE_MASK) || paddr < sdram_start ||
++ paddr + size > sdram_start + sdram_size) {
++ pr_err("Illegal SDRAM region for VRAM\n");
++ return;
++ }
++
++ if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) {
++ pr_err("FB: failed to reserve VRAM\n");
++ return;
++ }
++ } else {
++ if (size > sdram_size) {
++ pr_err("Illegal SDRAM size for VRAM\n");
++ return;
++ }
++
++ paddr = virt_to_phys(alloc_bootmem_pages(size));
++ BUG_ON(paddr & ~PAGE_MASK);
++ }
++
++ omap_vram_add_region(paddr, size);
++
++ pr_info("Reserving %u bytes SDRAM for VRAM\n", size);
++}
++
++/*
++ * Called at sram init time, before anything is pushed to the SRAM stack.
++ * Because of the stack scheme, we will allocate everything from the
++ * start of the lowest address region to the end of SRAM. This will also
++ * include padding for page alignment and possible holes between regions.
++ *
++ * As opposed to the SDRAM case, we'll also do any dynamic allocations at
++ * this point, since the driver built as a module would have problem with
++ * freeing / reallocating the regions.
++ */
++unsigned long __init omap_vram_reserve_sram(unsigned long sram_pstart,
++ unsigned long sram_vstart,
++ unsigned long sram_size,
++ unsigned long pstart_avail,
++ unsigned long size_avail)
++{
++ unsigned long pend_avail;
++ unsigned long reserved;
++ u32 paddr;
++ u32 size;
++
++ paddr = omap_vram_sram_start;
++ size = omap_vram_sram_size;
++
++ if (!size)
++ return 0;
++
++ reserved = 0;
++ pend_avail = pstart_avail + size_avail;
++
++ if (!paddr) {
++ /* Dynamic allocation */
++ if ((size_avail & PAGE_MASK) < size) {
++ pr_err("Not enough SRAM for VRAM\n");
++ return 0;
++ }
++ size_avail = (size_avail - size) & PAGE_MASK;
++ paddr = pstart_avail + size_avail;
++ }
++
++ if (paddr < sram_pstart ||
++ paddr + size > sram_pstart + sram_size) {
++ pr_err("Illegal SRAM region for VRAM\n");
++ return 0;
++ }
++
++ /* Reserve everything above the start of the region. */
++ if (pend_avail - paddr > reserved)
++ reserved = pend_avail - paddr;
++ size_avail = pend_avail - reserved - pstart_avail;
++
++ omap_vram_add_region(paddr, size);
++
++ if (reserved)
++ pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved);
++
++ return reserved;
++}
++
++void __init omap_vram_set_sdram_vram(u32 size, u32 start)
++{
++ omap_vram_sdram_start = start;
++ omap_vram_sdram_size = size;
++}
++
++void __init omap_vram_set_sram_vram(u32 size, u32 start)
++{
++ omap_vram_sram_start = start;
++ omap_vram_sram_size = size;
++}
+diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
+new file mode 100644
+index 0000000..8726689
+--- /dev/null
++++ b/drivers/video/omap2/vrfb.c
+@@ -0,0 +1,277 @@
++/*
++ * VRFB Rotation Engine
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/ioport.h>
++#include <linux/io.h>
++#include <linux/bitops.h>
++#include <linux/mutex.h>
++
++#include <mach/io.h>
++#include <mach/vrfb.h>
++#include <mach/sdrc.h>
++/*#define DEBUG*/
++
++#ifdef DEBUG
++#define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__)
++#else
++#define DBG(format, ...)
++#endif
++
++#define SMS_ROT_VIRT_BASE(context, rot) \
++ (((context >= 4) ? 0xD0000000 : 0x70000000) \
++ + (0x4000000 * (context)) \
++ + (0x1000000 * (rot)))
++
++#define OMAP_VRFB_SIZE (2048 * 2048 * 4)
++
++#define VRFB_PAGE_WIDTH_EXP 5 /* Assuming SDRAM pagesize= 1024 */
++#define VRFB_PAGE_HEIGHT_EXP 5 /* 1024 = 2^5 * 2^5 */
++#define VRFB_PAGE_WIDTH (1 << VRFB_PAGE_WIDTH_EXP)
++#define VRFB_PAGE_HEIGHT (1 << VRFB_PAGE_HEIGHT_EXP)
++#define SMS_IMAGEHEIGHT_OFFSET 16
++#define SMS_IMAGEWIDTH_OFFSET 0
++#define SMS_PH_OFFSET 8
++#define SMS_PW_OFFSET 4
++#define SMS_PS_OFFSET 0
++
++#define VRFB_NUM_CTXS 12
++/* bitmap of reserved contexts */
++static unsigned long ctx_map;
++/* bitmap of contexts for which we have to keep the HW context valid */
++static unsigned long ctx_map_active;
++
++static DEFINE_MUTEX(ctx_lock);
++
++/*
++ * Access to this happens from client drivers or the PM core after wake-up.
++ * For the first case we require locking at the driver level, for the second
++ * we don't need locking, since no drivers will run until after the wake-up
++ * has finished.
++ */
++static struct {
++ u32 physical_ba;
++ u32 control;
++ u32 size;
++} vrfb_hw_context[VRFB_NUM_CTXS];
++
++static inline void restore_hw_context(int ctx)
++{
++ omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx);
++ omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx);
++ omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx);
++}
++
++void omap_vrfb_restore_context(void)
++{
++ int i;
++ unsigned long map = ctx_map_active;
++
++ for (i = ffs(map); i; i = ffs(map)) {
++ /* i=1..32 */
++ i--;
++ map &= ~(1 << i);
++ restore_hw_context(i);
++ }
++}
++
++void omap_vrfb_adjust_size(u16 *width, u16 *height,
++ u8 bytespp)
++{
++ *width = ALIGN(*width * bytespp, VRFB_PAGE_WIDTH) / bytespp;
++ *height = ALIGN(*height, VRFB_PAGE_HEIGHT);
++}
++EXPORT_SYMBOL(omap_vrfb_adjust_size);
++
++void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
++ u16 width, u16 height,
++ unsigned bytespp, bool yuv_mode)
++{
++ unsigned pixel_size_exp;
++ u16 vrfb_width;
++ u16 vrfb_height;
++ u8 ctx = vrfb->context;
++ u32 size;
++ u32 control;
++
++ DBG("omapfb_set_vrfb(%d, %lx, %dx%d, %d)\n", ctx, paddr,
++ width, height, color_mode);
++
++ /* For YUV2 and UYVY modes VRFB needs to handle pixels a bit
++ * differently. See TRM. */
++ if (yuv_mode) {
++ bytespp *= 2;
++ width /= 2;
++ }
++
++ if (bytespp == 4)
++ pixel_size_exp = 2;
++ else if (bytespp == 2)
++ pixel_size_exp = 1;
++ else
++ BUG();
++
++ vrfb_width = ALIGN(width * bytespp, VRFB_PAGE_WIDTH) / bytespp;
++ vrfb_height = ALIGN(height, VRFB_PAGE_HEIGHT);
++
++ DBG("vrfb w %u, h %u bytespp %d\n", vrfb_width, vrfb_height, bytespp);
++
++ size = vrfb_width << SMS_IMAGEWIDTH_OFFSET;
++ size |= vrfb_height << SMS_IMAGEHEIGHT_OFFSET;
++
++ control = pixel_size_exp << SMS_PS_OFFSET;
++ control |= VRFB_PAGE_WIDTH_EXP << SMS_PW_OFFSET;
++ control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET;
++
++ vrfb_hw_context[ctx].physical_ba = paddr;
++ vrfb_hw_context[ctx].size = size;
++ vrfb_hw_context[ctx].control = control;
++
++ omap2_sms_write_rot_physical_ba(paddr, ctx);
++ omap2_sms_write_rot_size(size, ctx);
++ omap2_sms_write_rot_control(control, ctx);
++
++ DBG("vrfb offset pixels %d, %d\n",
++ vrfb_width - width, vrfb_height - height);
++
++ vrfb->xoffset = vrfb_width - width;
++ vrfb->yoffset = vrfb_height - height;
++ vrfb->bytespp = bytespp;
++}
++EXPORT_SYMBOL(omap_vrfb_setup);
++
++void omap_vrfb_release_ctx(struct vrfb *vrfb)
++{
++ int rot;
++ int ctx = vrfb->context;
++
++ if (ctx == 0xff)
++ return;
++
++ DBG("release ctx %d\n", ctx);
++
++ mutex_lock(&ctx_lock);
++
++ BUG_ON(!(ctx_map & (1 << ctx)));
++
++ clear_bit(ctx, &ctx_map_active);
++ clear_bit(ctx, &ctx_map);
++
++ for (rot = 0; rot < 4; ++rot) {
++ if (vrfb->paddr[rot]) {
++ release_mem_region(vrfb->paddr[rot], OMAP_VRFB_SIZE);
++ vrfb->paddr[rot] = 0;
++ }
++ }
++
++ vrfb->context = 0xff;
++
++ mutex_unlock(&ctx_lock);
++}
++EXPORT_SYMBOL(omap_vrfb_release_ctx);
++
++int omap_vrfb_request_ctx(struct vrfb *vrfb)
++{
++ int rot;
++ u32 paddr;
++ u8 ctx;
++ int r;
++
++ DBG("request ctx\n");
++
++ mutex_lock(&ctx_lock);
++
++ for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx)
++ if ((ctx_map & (1 << ctx)) == 0)
++ break;
++
++ if (ctx == VRFB_NUM_CTXS) {
++ pr_err("vrfb: no free contexts\n");
++ r = -EBUSY;
++ goto out;
++ }
++
++ DBG("found free ctx %d\n", ctx);
++
++ set_bit(ctx, &ctx_map);
++ WARN_ON(ctx_map_active & (1 << ctx));
++ set_bit(ctx, &ctx_map_active);
++
++ memset(vrfb, 0, sizeof(*vrfb));
++
++ vrfb->context = ctx;
++
++ for (rot = 0; rot < 4; ++rot) {
++ paddr = SMS_ROT_VIRT_BASE(ctx, rot);
++ if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) {
++ pr_err("vrfb: failed to reserve VRFB "
++ "area for ctx %d, rotation %d\n",
++ ctx, rot * 90);
++ omap_vrfb_release_ctx(vrfb);
++ r = -ENOMEM;
++ goto out;
++ }
++
++ vrfb->paddr[rot] = paddr;
++
++ DBG("VRFB %d/%d: %lx\n", ctx, rot*90, vrfb->paddr[rot]);
++ }
++
++ r = 0;
++out:
++ mutex_unlock(&ctx_lock);
++ return r;
++}
++EXPORT_SYMBOL(omap_vrfb_request_ctx);
++
++void omap_vrfb_suspend_ctx(struct vrfb *vrfb)
++{
++ DBG("suspend ctx %d\n", vrfb->context);
++ mutex_lock(&ctx_lock);
++
++ BUG_ON(vrfb->context >= VRFB_NUM_CTXS);
++ BUG_ON(!((1 << vrfb->context) & ctx_map_active));
++
++ clear_bit(vrfb->context, &ctx_map_active);
++ mutex_unlock(&ctx_lock);
++}
++EXPORT_SYMBOL(omap_vrfb_suspend_ctx);
++
++void omap_vrfb_resume_ctx(struct vrfb *vrfb)
++{
++ DBG("resume ctx %d\n", vrfb->context);
++ mutex_lock(&ctx_lock);
++
++ BUG_ON(vrfb->context >= VRFB_NUM_CTXS);
++ BUG_ON((1 << vrfb->context) & ctx_map_active);
++
++ /*
++ * omap_vrfb_restore_context is normally called by the core domain
++ * save / restore logic, but since this VRFB context was suspended
++ * those calls didn't actually restore the context and now we might
++ * have an invalid context. Do an explicit restore here.
++ */
++ restore_hw_context(vrfb->context);
++ set_bit(vrfb->context, &ctx_map_active);
++ mutex_unlock(&ctx_lock);
++}
++EXPORT_SYMBOL(omap_vrfb_resume_ctx);
++
+diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
+new file mode 100644
+index 0000000..52e0987
+--- /dev/null
++++ b/include/linux/omapfb.h
+@@ -0,0 +1,242 @@
++/*
++ * File: include/linux/omapfb.h
++ *
++ * Framebuffer driver for TI OMAP boards
++ *
++ * Copyright (C) 2004 Nokia Corporation
++ * Author: Imre Deak <imre.deak@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#ifndef __LINUX_OMAPFB_H__
++#define __LINUX_OMAPFB_H__
++
++#include <linux/fb.h>
++#include <linux/ioctl.h>
++#include <linux/types.h>
++
++/* IOCTL commands. */
++
++#define OMAP_IOW(num, dtype) _IOW('O', num, dtype)
++#define OMAP_IOR(num, dtype) _IOR('O', num, dtype)
++#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype)
++#define OMAP_IO(num) _IO('O', num)
++
++#define OMAPFB_MIRROR OMAP_IOW(31, int)
++#define OMAPFB_SYNC_GFX OMAP_IO(37)
++#define OMAPFB_VSYNC OMAP_IO(38)
++#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int)
++#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps)
++#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int)
++#define OMAPFB_LCD_TEST OMAP_IOW(45, int)
++#define OMAPFB_CTRL_TEST OMAP_IOW(46, int)
++#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
++#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key)
++#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key)
++#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info)
++#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info)
++#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window)
++#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info)
++#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info)
++#define OMAPFB_WAITFORVSYNC OMAP_IO(57)
++#define OMAPFB_MEMORY_READ OMAP_IOR(58, struct omapfb_memory_read)
++#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
++#define OMAPFB_WAITFORGO OMAP_IO(60)
++#define OMAPFB_GET_VRAM_INFO OMAP_IOR(61, struct omapfb_vram_info)
++
++#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff
++#define OMAPFB_CAPS_LCDC_MASK 0x00fff000
++#define OMAPFB_CAPS_PANEL_MASK 0xff000000
++
++#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000
++#define OMAPFB_CAPS_TEARSYNC 0x00002000
++#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000
++#define OMAPFB_CAPS_PLANE_SCALE 0x00008000
++#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
++#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
++#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
++#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
++#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
++
++/* Values from DSP must map to lower 16-bits */
++#define OMAPFB_FORMAT_MASK 0x00ff
++#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100
++#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200
++#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400
++#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800
++#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000
++
++#define OMAPFB_MEMTYPE_SDRAM 0
++#define OMAPFB_MEMTYPE_SRAM 1
++#define OMAPFB_MEMTYPE_MAX 1
++
++enum omapfb_color_format {
++ OMAPFB_COLOR_RGB565 = 0,
++ OMAPFB_COLOR_YUV422,
++ OMAPFB_COLOR_YUV420,
++ OMAPFB_COLOR_CLUT_8BPP,
++ OMAPFB_COLOR_CLUT_4BPP,
++ OMAPFB_COLOR_CLUT_2BPP,
++ OMAPFB_COLOR_CLUT_1BPP,
++ OMAPFB_COLOR_RGB444,
++ OMAPFB_COLOR_YUY422,
++
++ OMAPFB_COLOR_ARGB16,
++ OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */
++ OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */
++ OMAPFB_COLOR_ARGB32,
++ OMAPFB_COLOR_RGBA32,
++ OMAPFB_COLOR_RGBX32,
++};
++
++struct omapfb_update_window {
++ __u32 x, y;
++ __u32 width, height;
++ __u32 format;
++ __u32 out_x, out_y;
++ __u32 out_width, out_height;
++ __u32 reserved[8];
++};
++
++struct omapfb_update_window_old {
++ __u32 x, y;
++ __u32 width, height;
++ __u32 format;
++};
++
++enum omapfb_plane {
++ OMAPFB_PLANE_GFX = 0,
++ OMAPFB_PLANE_VID1,
++ OMAPFB_PLANE_VID2,
++};
++
++enum omapfb_channel_out {
++ OMAPFB_CHANNEL_OUT_LCD = 0,
++ OMAPFB_CHANNEL_OUT_DIGIT,
++};
++
++struct omapfb_plane_info {
++ __u32 pos_x;
++ __u32 pos_y;
++ __u8 enabled;
++ __u8 channel_out;
++ __u8 mirror;
++ __u8 reserved1;
++ __u32 out_width;
++ __u32 out_height;
++ __u32 reserved2[12];
++};
++
++struct omapfb_mem_info {
++ __u32 size;
++ __u8 type;
++ __u8 reserved[3];
++};
++
++struct omapfb_caps {
++ __u32 ctrl;
++ __u32 plane_color;
++ __u32 wnd_color;
++};
++
++enum omapfb_color_key_type {
++ OMAPFB_COLOR_KEY_DISABLED = 0,
++ OMAPFB_COLOR_KEY_GFX_DST,
++ OMAPFB_COLOR_KEY_VID_SRC,
++};
++
++struct omapfb_color_key {
++ __u8 channel_out;
++ __u32 background;
++ __u32 trans_key;
++ __u8 key_type;
++};
++
++enum omapfb_update_mode {
++ OMAPFB_UPDATE_DISABLED = 0,
++ OMAPFB_AUTO_UPDATE,
++ OMAPFB_MANUAL_UPDATE
++};
++
++struct omapfb_memory_read {
++ __u16 x;
++ __u16 y;
++ __u16 w;
++ __u16 h;
++ size_t buffer_size;
++ void __user *buffer;
++};
++
++struct omapfb_ovl_colormode {
++ __u8 overlay_idx;
++ __u8 mode_idx;
++ __u32 bits_per_pixel;
++ __u32 nonstd;
++ struct fb_bitfield red;
++ struct fb_bitfield green;
++ struct fb_bitfield blue;
++ struct fb_bitfield transp;
++};
++
++struct omapfb_vram_info {
++ __u32 total;
++ __u32 free;
++ __u32 largest_free_block;
++ __u32 reserved[5];
++};
++
++#ifdef __KERNEL__
++
++#include <mach/board.h>
++
++#ifdef CONFIG_ARCH_OMAP1
++#define OMAPFB_PLANE_NUM 1
++#else
++#define OMAPFB_PLANE_NUM 3
++#endif
++
++struct omapfb_mem_region {
++ u32 paddr;
++ void __iomem *vaddr;
++ unsigned long size;
++ u8 type; /* OMAPFB_PLANE_MEM_* */
++ enum omapfb_color_format format;/* OMAPFB_COLOR_* */
++ unsigned format_used:1; /* Must be set when format is set.
++ * Needed b/c of the badly chosen 0
++ * base for OMAPFB_COLOR_* values
++ */
++ unsigned alloc:1; /* allocated by the driver */
++ unsigned map:1; /* kernel mapped by the driver */
++};
++
++struct omapfb_mem_desc {
++ int region_cnt;
++ struct omapfb_mem_region region[OMAPFB_PLANE_NUM];
++};
++
++struct omapfb_platform_data {
++ struct omap_lcd_config lcd;
++ struct omapfb_mem_desc mem_desc;
++ void *ctrl_platform_data;
++};
++
++/* in arch/arm/plat-omap/fb.c */
++extern void omapfb_set_ctrl_platform_data(void *pdata);
++extern void omapfb_reserve_sdram(void);
++
++#endif
++
++#endif /* __OMAPFB_H */
--- /dev/null
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index 1c4119c..e861e32 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -1508,6 +1508,10 @@ source "net/Kconfig"
+
+ source "drivers/Kconfig"
+
++if ARCH_OMAP
++source "drivers/cbus/Kconfig"
++endif
++
+ source "fs/Kconfig"
+
+ source "arch/arm/Kconfig.debug"
+diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
+index 8da75de..264f52b 100644
+--- a/arch/arm/configs/n8x0_defconfig
++++ b/arch/arm/configs/n8x0_defconfig
+@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y
+ CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+ CONFIG_ZBOOT_ROM_BSS=0x10200000
+ # CONFIG_ZBOOT_ROM is not set
+-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
++CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
+ # CONFIG_XIP_KERNEL is not set
+ # CONFIG_KEXEC is not set
+
+diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
+index a7ead1b..74720e6 100644
+--- a/arch/arm/mach-omap1/board-fsample.c
++++ b/arch/arm/mach-omap1/board-fsample.c
+@@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+- .start = INT_730_MPU_EXT_NIRQ,
++ .start = INT_7XX_MPU_EXT_NIRQ,
+ .end = 0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+@@ -196,8 +196,8 @@ static struct platform_device smc91x_device = {
+
+ static struct resource kp_resources[] = {
+ [0] = {
+- .start = INT_730_MPUIO_KEYPAD,
+- .end = INT_730_MPUIO_KEYPAD,
++ .start = INT_7XX_MPUIO_KEYPAD,
++ .end = INT_7XX_MPUIO_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+@@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void)
+ /*
+ * Hold GSM Reset until needed
+ */
+- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
++ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+ /*
+ * UARTs -> done automagically by 8250 driver
+@@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void)
+ */
+
+ /* Flash: CS0 timings setup */
+- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
+- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
++ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
++ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+ /*
+ * Ethernet support through the debug board
+ * CS1 timings setup
+ */
+- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
+- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
++ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
++ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+ /*
+ * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+ * It is used as the Ethernet controller interrupt
+ */
+- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
++ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
+ }
+
+ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
+diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
+index 8340669..2f897cf 100644
+--- a/arch/arm/mach-omap1/board-perseus2.c
++++ b/arch/arm/mach-omap1/board-perseus2.c
+@@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+- .start = INT_730_MPU_EXT_NIRQ,
++ .start = INT_7XX_MPU_EXT_NIRQ,
+ .end = 0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+@@ -163,8 +163,8 @@ static struct platform_device smc91x_device = {
+
+ static struct resource kp_resources[] = {
+ [0] = {
+- .start = INT_730_MPUIO_KEYPAD,
+- .end = INT_730_MPUIO_KEYPAD,
++ .start = INT_7XX_MPUIO_KEYPAD,
++ .end = INT_7XX_MPUIO_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+@@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void)
+ /*
+ * Hold GSM Reset until needed
+ */
+- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
++ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+ /*
+ * UARTs -> done automagically by 8250 driver
+@@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void)
+ */
+
+ /* Flash: CS0 timings setup */
+- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
+- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
++ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
++ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+ /*
+ * Ethernet support through the debug board
+ * CS1 timings setup
+ */
+- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
+- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
++ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
++ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+ /*
+ * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+ * It is used as the Ethernet controller interrupt
+ */
+- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
++ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
+ }
+
+ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
+diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
+index 436eed2..5f77b83 100644
+--- a/arch/arm/mach-omap1/clock.c
++++ b/arch/arm/mach-omap1/clock.c
+@@ -69,13 +69,13 @@ struct omap_clk {
+ }
+
+ #define CK_310 (1 << 0)
+-#define CK_730 (1 << 1)
++#define CK_7XX (1 << 1)
+ #define CK_1510 (1 << 2)
+ #define CK_16XX (1 << 3)
+
+ static struct omap_clk omap_clks[] = {
+ /* non-ULPD clocks */
+- CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310),
++ CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX),
+ CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
+ /* CK_GEN1 clocks */
+ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
+@@ -83,7 +83,7 @@ static struct omap_clk omap_clks[] = {
+ CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310),
+- CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
++ CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
+ CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX),
+@@ -97,7 +97,7 @@ static struct omap_clk omap_clks[] = {
+ CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310),
+ /* CK_GEN3 clocks */
+- CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730),
++ CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
+ CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310),
+ CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX),
+ CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX),
+@@ -108,7 +108,7 @@ static struct omap_clk omap_clks[] = {
+ CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
+ CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
+ CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
+- CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730),
++ CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX),
+ CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310),
+ /* ULPD clocks */
+ CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310),
+@@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
+ * Reprogramming the DPLL is tricky, it must be done from SRAM.
+ * (on 730, bit 13 must always be 1)
+ */
+- if (cpu_is_omap730())
++ if (cpu_is_omap7xx())
+ omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
+ else
+ omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+@@ -783,8 +783,8 @@ int __init omap1_clk_init(void)
+ cpu_mask |= CK_16XX;
+ if (cpu_is_omap1510())
+ cpu_mask |= CK_1510;
+- if (cpu_is_omap730())
+- cpu_mask |= CK_730;
++ if (cpu_is_omap7xx())
++ cpu_mask |= CK_7XX;
+ if (cpu_is_omap310())
+ cpu_mask |= CK_310;
+
+@@ -800,7 +800,7 @@ int __init omap1_clk_init(void)
+ crystal_type = info->system_clock_type;
+ }
+
+-#if defined(CONFIG_ARCH_OMAP730)
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ ck_ref.rate = 13000000;
+ #elif defined(CONFIG_ARCH_OMAP16XX)
+ if (crystal_type == 2)
+@@ -847,7 +847,7 @@ int __init omap1_clk_init(void)
+ printk(KERN_ERR "System frequencies not set. Check your config.\n");
+ /* Guess sane values (60MHz) */
+ omap_writew(0x2290, DPLL_CTL);
+- omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
++ omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+ ck_dpll1.rate = 60000000;
+ }
+ #endif
+@@ -862,7 +862,7 @@ int __init omap1_clk_init(void)
+
+ #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
+ /* Select slicer output as OMAP input clock */
+- omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
++ omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
+ #endif
+
+ /* Amstrad Delta wants BCLK high when inactive */
+@@ -873,7 +873,7 @@ int __init omap1_clk_init(void)
+
+ /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
+ /* (on 730, bit 13 must not be cleared) */
+- if (cpu_is_omap730())
++ if (cpu_is_omap7xx())
+ omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
+ else
+ omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
+index 7030f92..a27df2c 100644
+--- a/arch/arm/mach-omap1/io.c
++++ b/arch/arm/mach-omap1/io.c
+@@ -36,33 +36,17 @@ static struct map_desc omap_io_desc[] __initdata = {
+ }
+ };
+
+-#ifdef CONFIG_ARCH_OMAP730
+-static struct map_desc omap730_io_desc[] __initdata = {
++#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
++static struct map_desc omap7xx_io_desc[] __initdata = {
+ {
+- .virtual = OMAP730_DSP_BASE,
+- .pfn = __phys_to_pfn(OMAP730_DSP_START),
+- .length = OMAP730_DSP_SIZE,
++ .virtual = OMAP7XX_DSP_BASE,
++ .pfn = __phys_to_pfn(OMAP7XX_DSP_START),
++ .length = OMAP7XX_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+- .virtual = OMAP730_DSPREG_BASE,
+- .pfn = __phys_to_pfn(OMAP730_DSPREG_START),
+- .length = OMAP730_DSPREG_SIZE,
+- .type = MT_DEVICE
+- }
+-};
+-#endif
+-
+-#ifdef CONFIG_ARCH_OMAP850
+-static struct map_desc omap850_io_desc[] __initdata = {
+- {
+- .virtual = OMAP850_DSP_BASE,
+- .pfn = __phys_to_pfn(OMAP850_DSP_START),
+- .length = OMAP850_DSP_SIZE,
+- .type = MT_DEVICE
+- }, {
+- .virtual = OMAP850_DSPREG_BASE,
+- .pfn = __phys_to_pfn(OMAP850_DSPREG_START),
+- .length = OMAP850_DSPREG_SIZE,
++ .virtual = OMAP7XX_DSPREG_BASE,
++ .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START),
++ .length = OMAP7XX_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
+ };
+@@ -120,18 +104,11 @@ void __init omap1_map_common_io(void)
+ */
+ omap_check_revision();
+
+-#ifdef CONFIG_ARCH_OMAP730
+- if (cpu_is_omap730()) {
+- iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
+- }
+-#endif
+-
+-#ifdef CONFIG_ARCH_OMAP850
+- if (cpu_is_omap850()) {
+- iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
++#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
++ if (cpu_is_omap7xx()) {
++ iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
+ }
+ #endif
+-
+ #ifdef CONFIG_ARCH_OMAP15XX
+ if (cpu_is_omap15xx()) {
+ iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
+diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
+index de03c84..8f98b58 100644
+--- a/arch/arm/mach-omap1/irq.c
++++ b/arch/arm/mach-omap1/irq.c
+@@ -137,16 +137,8 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
+ irq_bank_writel(val, bank, offset);
+ }
+
+-#ifdef CONFIG_ARCH_OMAP730
+-static struct omap_irq_bank omap730_irq_banks[] = {
+- { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
+- { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
+- { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
+-};
+-#endif
+-
+-#ifdef CONFIG_ARCH_OMAP850
+-static struct omap_irq_bank omap850_irq_banks[] = {
++#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
++static struct omap_irq_bank omap7xx_irq_banks[] = {
+ { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
+ { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
+ { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
+@@ -186,16 +178,10 @@ void __init omap_init_irq(void)
+ {
+ int i, j;
+
+-#ifdef CONFIG_ARCH_OMAP730
+- if (cpu_is_omap730()) {
+- irq_banks = omap730_irq_banks;
+- irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
+- }
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- if (cpu_is_omap850()) {
+- irq_banks = omap850_irq_banks;
+- irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ if (cpu_is_omap7xx()) {
++ irq_banks = omap7xx_irq_banks;
++ irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
+ }
+ #endif
+ #ifdef CONFIG_ARCH_OMAP15XX
+@@ -247,10 +233,8 @@ void __init omap_init_irq(void)
+
+ /* Unmask level 2 handler */
+
+- if (cpu_is_omap730())
+- omap_unmask_irq(INT_730_IH2_IRQ);
+- else if (cpu_is_omap850())
+- omap_unmask_irq(INT_850_IH2_IRQ);
++ if (cpu_is_omap7xx())
++ omap_unmask_irq(INT_7XX_IH2_IRQ);
+ else if (cpu_is_omap15xx())
+ omap_unmask_irq(INT_1510_IH2_IRQ);
+ else if (cpu_is_omap16xx())
+diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
+index 505d98c..3a51cb2 100644
+--- a/arch/arm/mach-omap1/mcbsp.c
++++ b/arch/arm/mach-omap1/mcbsp.c
+@@ -79,29 +79,29 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
+ .free = omap1_mcbsp_free,
+ };
+
+-#ifdef CONFIG_ARCH_OMAP730
+-static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
+ {
+- .phys_base = OMAP730_MCBSP1_BASE,
++ .phys_base = OMAP7XX_MCBSP1_BASE,
+ .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+- .rx_irq = INT_730_McBSP1RX,
+- .tx_irq = INT_730_McBSP1TX,
++ .rx_irq = INT_7XX_McBSP1RX,
++ .tx_irq = INT_7XX_McBSP1TX,
+ .ops = &omap1_mcbsp_ops,
+ },
+ {
+- .phys_base = OMAP730_MCBSP2_BASE,
++ .phys_base = OMAP7XX_MCBSP2_BASE,
+ .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+- .rx_irq = INT_730_McBSP2RX,
+- .tx_irq = INT_730_McBSP2TX,
++ .rx_irq = INT_7XX_McBSP2RX,
++ .tx_irq = INT_7XX_McBSP2TX,
+ .ops = &omap1_mcbsp_ops,
+ },
+ };
+-#define OMAP730_MCBSP_PDATA_SZ ARRAY_SIZE(omap730_mcbsp_pdata)
++#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata)
+ #else
+-#define omap730_mcbsp_pdata NULL
+-#define OMAP730_MCBSP_PDATA_SZ 0
++#define omap7xx_mcbsp_pdata NULL
++#define OMAP7XX_MCBSP_PDATA_SZ 0
+ #endif
+
+ #ifdef CONFIG_ARCH_OMAP15XX
+@@ -172,8 +172,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
+
+ int __init omap1_mcbsp_init(void)
+ {
+- if (cpu_is_omap730())
+- omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
++ if (cpu_is_omap7xx())
++ omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
+ if (cpu_is_omap15xx())
+ omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
+ if (cpu_is_omap16xx())
+@@ -184,9 +184,9 @@ int __init omap1_mcbsp_init(void)
+ if (!mcbsp_ptr)
+ return -ENOMEM;
+
+- if (cpu_is_omap730())
+- omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
+- OMAP730_MCBSP_PDATA_SZ);
++ if (cpu_is_omap7xx())
++ omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata,
++ OMAP7XX_MCBSP_PDATA_SZ);
+
+ if (cpu_is_omap15xx())
+ omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,
+diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
+index 721e0d9..d59899d 100644
+--- a/arch/arm/mach-omap1/mux.c
++++ b/arch/arm/mach-omap1/mux.c
+@@ -35,47 +35,28 @@
+
+ static struct omap_mux_cfg arch_mux_cfg;
+
+-#ifdef CONFIG_ARCH_OMAP730
+-static struct pin_config __initdata_or_module omap730_pins[] = {
+-MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0)
+-MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0)
+-MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0)
+-MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0)
+-MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0)
+-MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0)
+-MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0)
+-MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0)
+-MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0)
+-MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0)
+-
+-MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0)
+-MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0)
+-MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0)
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++static struct pin_config __initdata_or_module omap7xx_pins[] = {
++MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0)
++MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0)
++MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0)
++MUX_CFG_7XX("F3_7XX_KBR3", 13, 1, 0, 0, 1, 0)
++MUX_CFG_7XX("D2_7XX_KBR4", 13, 5, 0, 4, 1, 0)
++MUX_CFG_7XX("C2_7XX_KBC0", 13, 9, 0, 8, 1, 0)
++MUX_CFG_7XX("D3_7XX_KBC1", 13, 13, 0, 12, 1, 0)
++MUX_CFG_7XX("E4_7XX_KBC2", 13, 17, 0, 16, 1, 0)
++MUX_CFG_7XX("F4_7XX_KBC3", 13, 21, 0, 20, 1, 0)
++MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0)
++
++MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0)
++MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0)
++MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0)
+ };
+-#define OMAP730_PINS_SZ ARRAY_SIZE(omap730_pins)
++#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
+ #else
+-#define omap730_pins NULL
+-#define OMAP730_PINS_SZ 0
+-#endif /* CONFIG_ARCH_OMAP730 */
+-
+-#ifdef CONFIG_ARCH_OMAP850
+-struct pin_config __initdata_or_module omap850_pins[] = {
+-MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0)
+-MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0)
+-MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0)
+-MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0)
+-MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0)
+-MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0)
+-MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0)
+-MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0)
+-MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0)
+-MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0)
+-
+-MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0)
+-MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0)
+-MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0)
+-};
+-#endif
++#define omap7xx_pins NULL
++#define OMAP7XX_PINS_SZ 0
++#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
+
+ #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+ static struct pin_config __initdata_or_module omap1xxx_pins[] = {
+@@ -438,11 +419,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
+ printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
+ cfg->pull_name, cfg->pull_reg, pull_orig, pull);
+ }
+-
+-#ifdef CONFIG_ARCH_OMAP850
+- omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
+-#endif
+-
+ #endif
+
+ #ifdef CONFIG_OMAP_MUX_ERRORS
+@@ -454,9 +430,9 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
+
+ int __init omap1_mux_init(void)
+ {
+- if (cpu_is_omap730()) {
+- arch_mux_cfg.pins = omap730_pins;
+- arch_mux_cfg.size = OMAP730_PINS_SZ;
++ if (cpu_is_omap7xx()) {
++ arch_mux_cfg.pins = omap7xx_pins;
++ arch_mux_cfg.size = OMAP7XX_PINS_SZ;
+ arch_mux_cfg.cfg_reg = omap1_cfg_reg;
+ }
+
+diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
+index 5218943..10f4e4a 100644
+--- a/arch/arm/mach-omap1/pm.c
++++ b/arch/arm/mach-omap1/pm.c
+@@ -62,7 +62,7 @@
+ static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
+ static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
+ static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
+-static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
++static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
+ static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
+ static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
+
+@@ -183,9 +183,9 @@ static void omap_pm_wakeup_setup(void)
+ * drivers must still separately call omap_set_gpio_wakeup() to
+ * wake up to a GPIO interrupt.
+ */
+- if (cpu_is_omap730())
+- level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
+- OMAP_IRQ_BIT(INT_730_IH2_IRQ);
++ if (cpu_is_omap7xx())
++ level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
++ OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
+ else if (cpu_is_omap15xx())
+ level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+ OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
+@@ -195,10 +195,10 @@ static void omap_pm_wakeup_setup(void)
+
+ omap_writel(~level1_wake, OMAP_IH1_MIR);
+
+- if (cpu_is_omap730()) {
++ if (cpu_is_omap7xx()) {
+ omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+- omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) |
+- OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)),
++ omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
++ OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
+ OMAP_IH2_1_MIR);
+ } else if (cpu_is_omap15xx()) {
+ level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
+@@ -253,15 +253,15 @@ void omap1_pm_suspend(void)
+ * Save interrupt, MPUI, ARM and UPLD control registers.
+ */
+
+- if (cpu_is_omap730()) {
+- MPUI730_SAVE(OMAP_IH1_MIR);
+- MPUI730_SAVE(OMAP_IH2_0_MIR);
+- MPUI730_SAVE(OMAP_IH2_1_MIR);
+- MPUI730_SAVE(MPUI_CTRL);
+- MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+- MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+- MPUI730_SAVE(EMIFS_CONFIG);
+- MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
++ if (cpu_is_omap7xx()) {
++ MPUI7XX_SAVE(OMAP_IH1_MIR);
++ MPUI7XX_SAVE(OMAP_IH2_0_MIR);
++ MPUI7XX_SAVE(OMAP_IH2_1_MIR);
++ MPUI7XX_SAVE(MPUI_CTRL);
++ MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
++ MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
++ MPUI7XX_SAVE(EMIFS_CONFIG);
++ MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
+
+ } else if (cpu_is_omap15xx()) {
+ MPUI1510_SAVE(OMAP_IH1_MIR);
+@@ -306,7 +306,7 @@ void omap1_pm_suspend(void)
+ omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
+
+ /* shut down dsp_ck */
+- if (!cpu_is_omap730())
++ if (!cpu_is_omap7xx())
+ omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+
+ /* temporarily enabling api_ck to access DSP registers */
+@@ -383,12 +383,12 @@ void omap1_pm_suspend(void)
+ ULPD_RESTORE(ULPD_CLOCK_CTRL);
+ ULPD_RESTORE(ULPD_STATUS_REQ);
+
+- if (cpu_is_omap730()) {
+- MPUI730_RESTORE(EMIFS_CONFIG);
+- MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
+- MPUI730_RESTORE(OMAP_IH1_MIR);
+- MPUI730_RESTORE(OMAP_IH2_0_MIR);
+- MPUI730_RESTORE(OMAP_IH2_1_MIR);
++ if (cpu_is_omap7xx()) {
++ MPUI7XX_RESTORE(EMIFS_CONFIG);
++ MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
++ MPUI7XX_RESTORE(OMAP_IH1_MIR);
++ MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
++ MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
+ } else if (cpu_is_omap15xx()) {
+ MPUI1510_RESTORE(MPUI_CTRL);
+ MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
+@@ -461,13 +461,13 @@ static int omap_pm_read_proc(
+ ULPD_SAVE(ULPD_DPLL_CTRL);
+ ULPD_SAVE(ULPD_POWER_CTRL);
+
+- if (cpu_is_omap730()) {
+- MPUI730_SAVE(MPUI_CTRL);
+- MPUI730_SAVE(MPUI_DSP_STATUS);
+- MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+- MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+- MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+- MPUI730_SAVE(EMIFS_CONFIG);
++ if (cpu_is_omap7xx()) {
++ MPUI7XX_SAVE(MPUI_CTRL);
++ MPUI7XX_SAVE(MPUI_DSP_STATUS);
++ MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
++ MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
++ MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
++ MPUI7XX_SAVE(EMIFS_CONFIG);
+ } else if (cpu_is_omap15xx()) {
+ MPUI1510_SAVE(MPUI_CTRL);
+ MPUI1510_SAVE(MPUI_DSP_STATUS);
+@@ -517,20 +517,20 @@ static int omap_pm_read_proc(
+ ULPD_SHOW(ULPD_STATUS_REQ),
+ ULPD_SHOW(ULPD_POWER_CTRL));
+
+- if (cpu_is_omap730()) {
++ if (cpu_is_omap7xx()) {
+ my_buffer_offset += sprintf(my_base + my_buffer_offset,
+- "MPUI730_CTRL_REG 0x%-8x \n"
+- "MPUI730_DSP_STATUS_REG: 0x%-8x \n"
+- "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+- "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n"
+- "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n"
+- "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n",
+- MPUI730_SHOW(MPUI_CTRL),
+- MPUI730_SHOW(MPUI_DSP_STATUS),
+- MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
+- MPUI730_SHOW(MPUI_DSP_API_CONFIG),
+- MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
+- MPUI730_SHOW(EMIFS_CONFIG));
++ "MPUI7XX_CTRL_REG 0x%-8x \n"
++ "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n"
++ "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
++ "MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n"
++ "MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n"
++ "MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n",
++ MPUI7XX_SHOW(MPUI_CTRL),
++ MPUI7XX_SHOW(MPUI_DSP_STATUS),
++ MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
++ MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
++ MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
++ MPUI7XX_SHOW(EMIFS_CONFIG));
+ } else if (cpu_is_omap15xx()) {
+ my_buffer_offset += sprintf(my_base + my_buffer_offset,
+ "MPUI1510_CTRL_REG 0x%-8x \n"
+@@ -668,9 +668,9 @@ static int __init omap_pm_init(void)
+ * These routines need to be in SRAM as that's the only
+ * memory the MPU can see when it wakes up.
+ */
+- if (cpu_is_omap730()) {
+- omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
+- omap730_cpu_suspend_sz);
++ if (cpu_is_omap7xx()) {
++ omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
++ omap7xx_cpu_suspend_sz);
+ } else if (cpu_is_omap15xx()) {
+ omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
+ omap1510_cpu_suspend_sz);
+@@ -686,8 +686,8 @@ static int __init omap_pm_init(void)
+
+ pm_idle = omap1_pm_idle;
+
+- if (cpu_is_omap730())
+- setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
++ if (cpu_is_omap7xx())
++ setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
+ else if (cpu_is_omap16xx())
+ setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+
+@@ -700,8 +700,8 @@ static int __init omap_pm_init(void)
+ omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
+
+ /* Configure IDLECT3 */
+- if (cpu_is_omap730())
+- omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
++ if (cpu_is_omap7xx())
++ omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
+ else if (cpu_is_omap16xx())
+ omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
+
+diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
+index c4f05bd..56a6479 100644
+--- a/arch/arm/mach-omap1/pm.h
++++ b/arch/arm/mach-omap1/pm.h
+@@ -98,13 +98,14 @@
+ #define OMAP1610_IDLECT3 0xfffece24
+ #define OMAP1610_IDLE_LOOP_REQUEST 0x0400
+
+-#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7
+-#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7
+-#define OMAP730_IDLECT3_VAL 0x3f
+-#define OMAP730_IDLECT3 0xfffece24
+-#define OMAP730_IDLE_LOOP_REQUEST 0x0C00
++#define OMAP7XX_IDLECT1_SLEEP_VAL 0x16c7
++#define OMAP7XX_IDLECT2_SLEEP_VAL 0x09c7
++#define OMAP7XX_IDLECT3_VAL 0x3f
++#define OMAP7XX_IDLECT3 0xfffece24
++#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00
+
+ #if !defined(CONFIG_ARCH_OMAP730) && \
++ !defined(CONFIG_ARCH_OMAP850) && \
+ !defined(CONFIG_ARCH_OMAP15XX) && \
+ !defined(CONFIG_ARCH_OMAP16XX)
+ #warning "Power management for this processor not implemented yet"
+@@ -122,17 +123,17 @@ extern void allow_idle_sleep(void);
+ extern void omap1_pm_idle(void);
+ extern void omap1_pm_suspend(void);
+
+-extern void omap730_cpu_suspend(unsigned short, unsigned short);
++extern void omap7xx_cpu_suspend(unsigned short, unsigned short);
+ extern void omap1510_cpu_suspend(unsigned short, unsigned short);
+ extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+-extern void omap730_idle_loop_suspend(void);
++extern void omap7xx_idle_loop_suspend(void);
+ extern void omap1510_idle_loop_suspend(void);
+ extern void omap1610_idle_loop_suspend(void);
+
+-extern unsigned int omap730_cpu_suspend_sz;
++extern unsigned int omap7xx_cpu_suspend_sz;
+ extern unsigned int omap1510_cpu_suspend_sz;
+ extern unsigned int omap1610_cpu_suspend_sz;
+-extern unsigned int omap730_idle_loop_suspend_sz;
++extern unsigned int omap7xx_idle_loop_suspend_sz;
+ extern unsigned int omap1510_idle_loop_suspend_sz;
+ extern unsigned int omap1610_idle_loop_suspend_sz;
+
+@@ -155,9 +156,9 @@ extern void omap_serial_wake_trigger(int enable);
+ #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
+ #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
+
+-#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
+-#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
+-#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
++#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
++#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
++#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
+
+ #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
+ #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
+@@ -232,24 +233,24 @@ enum mpui1510_save_state {
+ #endif
+ };
+
+-enum mpui730_save_state {
+- MPUI730_SLEEP_SAVE_START = 0,
++enum mpui7xx_save_state {
++ MPUI7XX_SLEEP_SAVE_START = 0,
+ /*
+ * MPUI registers 32 bits
+ */
+- MPUI730_SLEEP_SAVE_MPUI_CTRL,
+- MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+- MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+- MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
+- MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+- MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
+- MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
+- MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
+- MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
+-#if defined(CONFIG_ARCH_OMAP730)
+- MPUI730_SLEEP_SAVE_SIZE
++ MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
++ MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
++ MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
++ MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
++ MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
++ MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
++ MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
++ MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
++ MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ MPUI7XX_SLEEP_SAVE_SIZE
+ #else
+- MPUI730_SLEEP_SAVE_SIZE = 0
++ MPUI7XX_SLEEP_SAVE_SIZE = 0
+ #endif
+ };
+
+diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
+index d496e50..332c516 100644
+--- a/arch/arm/mach-omap1/serial.c
++++ b/arch/arm/mach-omap1/serial.c
+@@ -64,7 +64,6 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
+
+ static struct plat_serial8250_port serial_platform_data[] = {
+ {
+- .membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
+ .mapbase = OMAP_UART1_BASE,
+ .irq = INT_UART1,
+ .flags = UPF_BOOT_AUTOCONF,
+@@ -73,7 +72,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
+ .uartclk = OMAP16XX_BASE_BAUD * 16,
+ },
+ {
+- .membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
+ .mapbase = OMAP_UART2_BASE,
+ .irq = INT_UART2,
+ .flags = UPF_BOOT_AUTOCONF,
+@@ -82,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
+ .uartclk = OMAP16XX_BASE_BAUD * 16,
+ },
+ {
+- .membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
+ .mapbase = OMAP_UART3_BASE,
+ .irq = INT_UART3,
+ .flags = UPF_BOOT_AUTOCONF,
+@@ -90,7 +87,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
+ .regshift = 2,
+ .uartclk = OMAP16XX_BASE_BAUD * 16,
+ },
+- { },
+ };
+
+ static struct platform_device serial_device = {
+@@ -110,18 +106,11 @@ void __init omap_serial_init(void)
+ {
+ int i;
+
+- if (cpu_is_omap730()) {
++ if (cpu_is_omap7xx()) {
+ serial_platform_data[0].regshift = 0;
+ serial_platform_data[1].regshift = 0;
+- serial_platform_data[0].irq = INT_730_UART_MODEM_1;
+- serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
+- }
+-
+- if (cpu_is_omap850()) {
+- serial_platform_data[0].regshift = 0;
+- serial_platform_data[1].regshift = 0;
+- serial_platform_data[0].irq = INT_850_UART_MODEM_1;
+- serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
++ serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
++ serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
+ }
+
+ if (cpu_is_omap15xx()) {
+@@ -130,9 +119,17 @@ void __init omap_serial_init(void)
+ serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
+ }
+
+- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
++ for (i = 0; i < ARRAY_SIZE(serial_platform_data); i++) {
+ unsigned char reg;
+
++ /* Static mapping, never released */
++ serial_platform_data[i].membase =
++ ioremap(serial_platform_data[i].mapbase, SZ_2K);
++ if (!serial_platform_data[i].membase) {
++ printk(KERN_ERR "Could not ioremap uart%i\n", i);
++ continue;
++ }
++
+ switch (i) {
+ case 0:
+ uart1_ck = clk_get(NULL, "uart1_ck");
+diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
+index 22e8568..ef771ce 100644
+--- a/arch/arm/mach-omap1/sleep.S
++++ b/arch/arm/mach-omap1/sleep.S
+@@ -1,7 +1,7 @@
+ /*
+ * linux/arch/arm/mach-omap1/sleep.S
+ *
+- * Low-level OMAP730/1510/1610 sleep/wakeUp support
++ * Low-level OMAP7XX/1510/1610 sleep/wakeUp support
+ *
+ * Initial SA1110 code:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+@@ -57,8 +57,8 @@
+ *
+ */
+
+-#if defined(CONFIG_ARCH_OMAP730)
+-ENTRY(omap730_cpu_suspend)
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ENTRY(omap7xx_cpu_suspend)
+
+ @ save registers on stack
+ stmfd sp!, {r0 - r12, lr}
+@@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend)
+
+ @ turn off clock domains
+ @ do not disable PERCK (0x04)
+- mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
+- orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
++ mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
++ orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
+ strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+
+ @ request ARM idle
+- mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
+- orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
++ mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
++ orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
+ strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+ @ disable instruction cache
+@@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend)
+ mov r2, #0
+ mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
+ /*
+- * omap730_cpu_suspend()'s resume point.
++ * omap7xx_cpu_suspend()'s resume point.
+ *
+ * It will just start executing here, so we'll restore stuff from the
+ * stack.
+@@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend)
+ @ restore regs and return
+ ldmfd sp!, {r0 - r12, pc}
+
+-ENTRY(omap730_cpu_suspend_sz)
+- .word . - omap730_cpu_suspend
+-#endif /* CONFIG_ARCH_OMAP730 */
++ENTRY(omap7xx_cpu_suspend_sz)
++ .word . - omap7xx_cpu_suspend
++#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
+
+ #ifdef CONFIG_ARCH_OMAP15XX
+ ENTRY(omap1510_cpu_suspend)
+diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
+index 8cb1677..6b7702f 100644
+--- a/arch/arm/mach-omap2/Makefile
++++ b/arch/arm/mach-omap2/Makefile
+@@ -80,6 +80,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
+ # Platform specific device init code
+ obj-y += usb-musb.o
+ obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
++obj-y += usb-ehci.o
+
+ onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
+ obj-y += $(onenand-m) $(onenand-y)
+diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
+index 42217b3..e032a33 100644
+--- a/arch/arm/mach-omap2/board-2430sdp.c
++++ b/arch/arm/mach-omap2/board-2430sdp.c
+@@ -221,7 +221,7 @@ static void __init omap_2430sdp_map_io(void)
+ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
+ /* Maintainer: Syed Khasim - Texas Instruments Inc */
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_2430sdp_map_io,
+ .init_irq = omap_2430sdp_init_irq,
+diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
+index efaf053..81aabac 100644
+--- a/arch/arm/mach-omap2/board-3430sdp.c
++++ b/arch/arm/mach-omap2/board-3430sdp.c
+@@ -484,6 +484,18 @@ static void enable_board_wakeup_source(void)
+ omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+ }
+
++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
++
++ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
++
++ .phy_reset = true,
++ .reset_gpio_port[0] = 57,
++ .reset_gpio_port[1] = 61,
++ .reset_gpio_port[2] = -EINVAL
++};
++
+ static void __init omap_3430sdp_init(void)
+ {
+ omap3430_i2c_init();
+@@ -500,6 +512,7 @@ static void __init omap_3430sdp_init(void)
+ usb_musb_init();
+ board_smc91x_init();
+ enable_board_wakeup_source();
++ usb_ehci_init(&ehci_pdata);
+ }
+
+ static void __init omap_3430sdp_map_io(void)
+@@ -511,7 +524,7 @@ static void __init omap_3430sdp_map_io(void)
+ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
+ /* Maintainer: Syed Khasim - Texas Instruments Inc */
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_3430sdp_map_io,
+ .init_irq = omap_3430sdp_init_irq,
+diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
+index eb37c40..50a62f2 100644
+--- a/arch/arm/mach-omap2/board-4430sdp.c
++++ b/arch/arm/mach-omap2/board-4430sdp.c
+@@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+
+ static void __init gic_init_irq(void)
+ {
+- gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+- gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
++ void __iomem *base;
++
++ /* Static mapping, never released */
++ base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
++ BUG_ON(!base);
++ gic_dist_init(0, base, 29);
++
++ /* Static mapping, never released */
++ base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
++ BUG_ON(!base);
++ gic_cpu_init(0, OMAP44XX_GIC_CPU_BASE);
+ }
+
+ static void __init omap_4430sdp_init_irq(void)
+@@ -84,7 +93,7 @@ static void __init omap_4430sdp_map_io(void)
+ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+ /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_4430sdp_map_io,
+ .init_irq = omap_4430sdp_init_irq,
+diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
+index a113228..e8a0e56 100644
+--- a/arch/arm/mach-omap2/board-apollon.c
++++ b/arch/arm/mach-omap2/board-apollon.c
+@@ -333,7 +333,7 @@ static void __init omap_apollon_map_io(void)
+ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
+ /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_apollon_map_io,
+ .init_irq = omap_apollon_init_irq,
+diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
+index 2e09a1c..1a139c0 100644
+--- a/arch/arm/mach-omap2/board-generic.c
++++ b/arch/arm/mach-omap2/board-generic.c
+@@ -56,7 +56,7 @@ static void __init omap_generic_map_io(void)
+ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
+ /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_generic_map_io,
+ .init_irq = omap_generic_init_irq,
+diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
+index eaa02d0..86f78f3 100644
+--- a/arch/arm/mach-omap2/board-h4.c
++++ b/arch/arm/mach-omap2/board-h4.c
+@@ -376,7 +376,7 @@ static void __init omap_h4_map_io(void)
+ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
+ /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_h4_map_io,
+ .init_irq = omap_h4_init_irq,
+diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
+index d110a7f..4ccc01a 100644
+--- a/arch/arm/mach-omap2/board-ldp.c
++++ b/arch/arm/mach-omap2/board-ldp.c
+@@ -399,7 +399,7 @@ static void __init omap_ldp_map_io(void)
+
+ MACHINE_START(OMAP_LDP, "OMAP LDP board")
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_ldp_map_io,
+ .init_irq = omap_ldp_init_irq,
+diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
+index 8341632..2f6ccba 100644
+--- a/arch/arm/mach-omap2/board-n8x0.c
++++ b/arch/arm/mach-omap2/board-n8x0.c
+@@ -121,7 +121,7 @@ static void __init n8x0_init_machine(void)
+
+ MACHINE_START(NOKIA_N800, "Nokia N800")
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = n8x0_map_io,
+ .init_irq = n8x0_init_irq,
+@@ -131,7 +131,7 @@ MACHINE_END
+
+ MACHINE_START(NOKIA_N810, "Nokia N810")
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = n8x0_map_io,
+ .init_irq = n8x0_init_irq,
+@@ -141,7 +141,7 @@ MACHINE_END
+
+ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = n8x0_map_io,
+ .init_irq = n8x0_init_irq,
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 70df6b4..9824073 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -400,6 +400,18 @@ static void __init omap3beagle_flash_init(void)
+ }
+ }
+
++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
++
++ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
++
++ .phy_reset = true,
++ .reset_gpio_port[0] = -EINVAL,
++ .reset_gpio_port[1] = 147,
++ .reset_gpio_port[2] = -EINVAL
++};
++
+ static void __init omap3_beagle_init(void)
+ {
+ omap3_beagle_i2c_init();
+@@ -413,6 +425,7 @@ static void __init omap3_beagle_init(void)
+ gpio_direction_output(170, true);
+
+ usb_musb_init();
++ usb_ehci_init(&ehci_pdata);
+ omap3beagle_flash_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+@@ -429,7 +442,7 @@ static void __init omap3_beagle_map_io(void)
+ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
+ /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_beagle_map_io,
+ .init_irq = omap3_beagle_init_irq,
+diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
+index e4ec0c5..9e0b6e6 100644
+--- a/arch/arm/mach-omap2/board-omap3evm.c
++++ b/arch/arm/mach-omap2/board-omap3evm.c
+@@ -297,6 +297,18 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
+ &omap3evm_smc911x_device,
+ };
+
++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
++
++ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
++
++ .phy_reset = true,
++ .reset_gpio_port[0] = -EINVAL,
++ .reset_gpio_port[1] = 135,
++ .reset_gpio_port[2] = -EINVAL
++};
++
+ static void __init omap3_evm_init(void)
+ {
+ omap3_evm_i2c_init();
+@@ -312,6 +324,9 @@ static void __init omap3_evm_init(void)
+ usb_nop_xceiv_register();
+ #endif
+ usb_musb_init();
++ /* Setup EHCI phy reset padconfig */
++ omap_cfg_reg(AF4_34XX_GPIO135_OUT);
++ usb_ehci_init(&ehci_pdata);
+ ads7846_dev_init();
+ }
+
+@@ -324,7 +339,7 @@ static void __init omap3_evm_map_io(void)
+ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+ /* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_evm_map_io,
+ .init_irq = omap3_evm_init_irq,
+diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
+index 7f6bf87..82b2486 100644
+--- a/arch/arm/mach-omap2/board-omap3pandora.c
++++ b/arch/arm/mach-omap2/board-omap3pandora.c
+@@ -387,6 +387,18 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
+ &pandora_keys_gpio,
+ };
+
++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
++
++ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
++ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
++
++ .phy_reset = true,
++ .reset_gpio_port[0] = 16,
++ .reset_gpio_port[1] = -EINVAL,
++ .reset_gpio_port[2] = -EINVAL
++};
++
+ static void __init omap3pandora_init(void)
+ {
+ omap3pandora_i2c_init();
+@@ -396,6 +408,7 @@ static void __init omap3pandora_init(void)
+ spi_register_board_info(omap3pandora_spi_board_info,
+ ARRAY_SIZE(omap3pandora_spi_board_info));
+ omap3pandora_ads7846_init();
++ usb_ehci_init(&ehci_pdata);
+ pandora_keys_gpio_init();
+ usb_musb_init();
+
+@@ -412,7 +425,7 @@ static void __init omap3pandora_map_io(void)
+
+ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3pandora_map_io,
+ .init_irq = omap3pandora_init_irq,
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index 9917d2f..d50a3f0 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -384,6 +384,18 @@ static struct platform_device *overo_devices[] __initdata = {
+ &overo_lcd_device,
+ };
+
++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
++ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
++
++ .phy_reset = true,
++ .reset_gpio_port[0] = -EINVAL,
++ .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
++ .reset_gpio_port[2] = -EINVAL
++};
++
++
+ static void __init overo_init(void)
+ {
+ overo_i2c_init();
+@@ -391,6 +403,7 @@ static void __init overo_init(void)
+ omap_serial_init();
+ overo_flash_init();
+ usb_musb_init();
++ usb_ehci_init(&ehci_pdata);
+ overo_ads7846_init();
+ overo_init_smsc911x();
+
+@@ -433,14 +446,6 @@ static void __init overo_init(void)
+ else
+ printk(KERN_ERR "could not obtain gpio for "
+ "OVERO_GPIO_USBH_CPEN\n");
+-
+- if ((gpio_request(OVERO_GPIO_USBH_NRESET,
+- "OVERO_GPIO_USBH_NRESET") == 0) &&
+- (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
+- gpio_export(OVERO_GPIO_USBH_NRESET, 0);
+- else
+- printk(KERN_ERR "could not obtain gpio for "
+- "OVERO_GPIO_USBH_NRESET\n");
+ }
+
+ static void __init overo_map_io(void)
+@@ -451,7 +456,7 @@ static void __init overo_map_io(void)
+
+ MACHINE_START(OVERO, "Gumstix Overo")
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = overo_map_io,
+ .init_irq = overo_init_irq,
+diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
+index f9196c3..c973812 100644
+--- a/arch/arm/mach-omap2/board-rx51.c
++++ b/arch/arm/mach-omap2/board-rx51.c
+@@ -85,7 +85,7 @@ static void __init rx51_map_io(void)
+ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
+ /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = rx51_map_io,
+ .init_irq = rx51_init_irq,
+diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
+index fd3369d..48bd2af 100644
+--- a/arch/arm/mach-omap2/board-zoom2.c
++++ b/arch/arm/mach-omap2/board-zoom2.c
+@@ -283,7 +283,7 @@ static void __init omap_zoom2_map_io(void)
+
+ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+ .phys_io = 0x48000000,
+- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
++ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_zoom2_map_io,
+ .init_irq = omap_zoom2_init_irq,
+diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
+index cfd0b72..a2fcfcc 100644
+--- a/arch/arm/mach-omap2/cm.h
++++ b/arch/arm/mach-omap2/cm.h
+@@ -17,11 +17,11 @@
+ #include "prcm-common.h"
+
+ #define OMAP2420_CM_REGADDR(module, reg) \
+- OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
++ OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+ #define OMAP2430_CM_REGADDR(module, reg) \
+- OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
++ OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+ #define OMAP34XX_CM_REGADDR(module, reg) \
+- OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
++ OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+
+ /*
+ * Architecture-specific global CM registers
+diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
+index a98201c..71d5568 100644
+--- a/arch/arm/mach-omap2/id.c
++++ b/arch/arm/mach-omap2/id.c
+@@ -28,6 +28,7 @@
+ static struct omap_chip_id omap_chip;
+ static unsigned int omap_revision;
+
++u32 omap3_features;
+
+ unsigned int omap_rev(void)
+ {
+@@ -155,12 +156,37 @@ void __init omap24xx_check_revision(void)
+ pr_info("\n");
+ }
+
+-void __init omap34xx_check_revision(void)
++#define OMAP3_CHECK_FEATURE(status,feat) \
++ if (((status & OMAP3_ ##feat## _MASK) \
++ >> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \
++ omap3_features |= OMAP3_HAS_ ##feat; \
++ }
++
++void __init omap3_check_features(void)
++{
++ u32 status;
++
++ omap3_features = 0;
++
++ status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
++
++ OMAP3_CHECK_FEATURE(status, L2CACHE);
++ OMAP3_CHECK_FEATURE(status, IVA);
++ OMAP3_CHECK_FEATURE(status, SGX);
++ OMAP3_CHECK_FEATURE(status, NEON);
++ OMAP3_CHECK_FEATURE(status, ISP);
++
++ /*
++ * TODO: Get additional info (where applicable)
++ * e.g. Size of L2 cache.
++ */
++}
++
++void __init omap3_check_revision(void)
+ {
+ u32 cpuid, idcode;
+ u16 hawkeye;
+ u8 rev;
+- char *rev_name = "ES1.0";
+
+ /*
+ * We cannot access revision registers on ES1.0.
+@@ -170,7 +196,7 @@ void __init omap34xx_check_revision(void)
+ cpuid = read_cpuid(CPUID_ID);
+ if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
+ omap_revision = OMAP3430_REV_ES1_0;
+- goto out;
++ return;
+ }
+
+ /*
+@@ -183,33 +209,111 @@ void __init omap34xx_check_revision(void)
+ hawkeye = (idcode >> 12) & 0xffff;
+ rev = (idcode >> 28) & 0xff;
+
+- if (hawkeye == 0xb7ae) {
++ switch (hawkeye) {
++ case 0xb7ae:
++ /* Handle 34xx/35xx devices */
+ switch (rev) {
+- case 0:
++ case 0: /* Take care of early samples */
++ case 1:
+ omap_revision = OMAP3430_REV_ES2_0;
+- rev_name = "ES2.0";
+ break;
+ case 2:
+ omap_revision = OMAP3430_REV_ES2_1;
+- rev_name = "ES2.1";
+ break;
+ case 3:
+ omap_revision = OMAP3430_REV_ES3_0;
+- rev_name = "ES3.0";
+ break;
+ case 4:
+ omap_revision = OMAP3430_REV_ES3_1;
+- rev_name = "ES3.1";
+ break;
+ default:
+ /* Use the latest known revision as default */
+ omap_revision = OMAP3430_REV_ES3_1;
+- rev_name = "Unknown revision\n";
+ }
++ break;
++ case 0xb891:
++ /* Handle 36xx devices */
++ switch (rev) {
++ case 0:
++ omap_revision = OMAP3630_REV_ES1_0;
++ break;
++ default:
++ /* Use the latest known revision as default */
++ omap_revision = OMAP3630_REV_ES1_0;
++ }
++ break;
++ default:
++ /* Unknown default to latest silicon rev as default*/
++ omap_revision = OMAP3630_REV_ES1_0;
+ }
++}
+
+-out:
+- pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
++#define OMAP3_SHOW_FEATURE(feat) \
++ if (omap3_has_ ##feat()) { \
++ pr_info (" - "#feat" : Y"); \
++ } else { \
++ pr_info (" - "#feat" : N"); \
++ }
++
++void __init omap3_cpuinfo(void)
++{
++ u8 rev = GET_OMAP_REVISION();
++ char cpu_name[16], cpu_rev[16];
++
++ /* OMAP3430 and OMAP3530 are assumed to be same.
++ *
++ * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
++ * on available features. Upon detection, update the CPU id
++ * and CPU class bits.
++ */
++ if (cpu_is_omap3630())
++ strcpy(cpu_name, "3630");
++ else if (omap3_has_iva() && omap3_has_sgx())
++ strcpy(cpu_name, "3430/3530");
++ else if (omap3_has_sgx()) {
++ omap_revision = OMAP3525_REV(rev);
++ strcpy(cpu_name, "3525");
++ }
++ else if (omap3_has_iva()) {
++ omap_revision = OMAP3515_REV(rev);
++ strcpy(cpu_name, "3515");
++ }
++ else {
++ omap_revision = OMAP3503_REV(rev);
++ strcpy(cpu_name, "3503");
++ }
++
++ switch (rev) {
++ case OMAP_REVBITS_00:
++ strcpy(cpu_rev, "1.0");
++ break;
++ case OMAP_REVBITS_10:
++ strcpy(cpu_rev, "2.0");
++ break;
++ case OMAP_REVBITS_20:
++ strcpy(cpu_rev, "2.1");
++ break;
++ case OMAP_REVBITS_30:
++ strcpy(cpu_rev, "3.0");
++ break;
++ case OMAP_REVBITS_40:
++ strcpy(cpu_rev, "3.1");
++ break;
++ default:
++ /* Use the latest known revision as default */
++ strcpy(cpu_rev, "3.1");
++ }
++
++ /*
++ * Print verbose information
++ */
++ pr_info("OMAP%s ES%s\n", cpu_name, cpu_rev);
++
++ OMAP3_SHOW_FEATURE(l2cache);
++ OMAP3_SHOW_FEATURE(iva);
++ OMAP3_SHOW_FEATURE(sgx);
++ OMAP3_SHOW_FEATURE(neon);
++ OMAP3_SHOW_FEATURE(isp);
+ }
+
+ /*
+@@ -223,8 +327,11 @@ void __init omap2_check_revision(void)
+ */
+ if (cpu_is_omap24xx())
+ omap24xx_check_revision();
+- else if (cpu_is_omap34xx())
+- omap34xx_check_revision();
++ else if (cpu_is_omap34xx()) {
++ omap3_check_features();
++ omap3_check_revision();
++ omap3_cpuinfo();
++ }
+ else if (cpu_is_omap44xx()) {
+ printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+ return;
+diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
+index e3a3bad..fc62953 100644
+--- a/arch/arm/mach-omap2/io.c
++++ b/arch/arm/mach-omap2/io.c
+@@ -203,6 +203,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
+ .type = MT_DEVICE,
+ },
+ {
++ .virtual = OMAP44XX_EMIF1_VIRT,
++ .pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
++ .length = OMAP44XX_EMIF1_SIZE,
++ .type = MT_DEVICE,
++ },
++ {
++ .virtual = OMAP44XX_EMIF2_VIRT,
++ .pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
++ .length = OMAP44XX_EMIF2_SIZE,
++ .type = MT_DEVICE,
++ },
++ {
++ .virtual = OMAP44XX_DMM_VIRT,
++ .pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS),
++ .length = OMAP44XX_DMM_SIZE,
++ .type = MT_DEVICE,
++ },
++ {
+ .virtual = L4_PER_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
+ .length = L4_PER_44XX_SIZE,
+diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
+index b828638..1db121f 100644
+--- a/arch/arm/mach-omap2/irq.c
++++ b/arch/arm/mach-omap2/irq.c
+@@ -178,12 +178,20 @@ void __init omap_init_irq(void)
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
++ unsigned long base;
+ struct omap_irq_bank *bank = irq_banks + i;
+
+ if (cpu_is_omap24xx())
+- bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
++ base = OMAP24XX_IC_BASE;
+ else if (cpu_is_omap34xx())
+- bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
++ base = OMAP34XX_IC_BASE;
++
++ /* Static mapping, never released */
++ bank->base_reg = ioremap(base, SZ_4K);
++ if (!bank->base_reg) {
++ printk(KERN_ERR "Could not ioremap irq bank%i\n", i);
++ continue;
++ }
+
+ omap_irq_bank_init_one(bank);
+
+diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
+index 48ee295..a1b618c 100644
+--- a/arch/arm/mach-omap2/omap-smp.c
++++ b/arch/arm/mach-omap2/omap-smp.c
+@@ -26,11 +26,11 @@
+ #include <mach/hardware.h>
+
+ /* Registers used for communicating startup information */
+-#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800)
+-#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804)
++static void __iomem *omap4_auxcoreboot_reg0;
++static void __iomem *omap4_auxcoreboot_reg1;
+
+ /* SCU base address */
+-static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
++static void __iomem *scu_base;
+
+ /*
+ * Use SCU config register to count number of cores
+@@ -46,6 +46,8 @@ static DEFINE_SPINLOCK(boot_lock);
+
+ void __cpuinit platform_secondary_init(unsigned int cpu)
+ {
++ void __iomem *gic_cpu_base;
++
+ trace_hardirqs_off();
+
+ /*
+@@ -54,7 +56,10 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
+ * for us: do so
+ */
+
+- gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
++ /* Static mapping, never released */
++ gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
++ BUG_ON(!gic_cpu_base);
++ gic_cpu_init(0, gic_cpu_base);
+
+ /*
+ * Synchronise with the boot thread.
+@@ -79,7 +84,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+ * the AuxCoreBoot1 register is updated with cpu state
+ * A barrier is added to ensure that write buffer is drained
+ */
+- __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
++ __raw_writel(cpu, omap4_auxcoreboot_reg1);
+ smp_wmb();
+
+ timeout = jiffies + (1 * HZ);
+@@ -104,7 +109,7 @@ static void __init wakeup_secondary(void)
+ * A barrier is added to ensure that write buffer is drained
+ */
+ __raw_writel(virt_to_phys(omap_secondary_startup), \
+- OMAP4_AUXCOREBOOT_REG0);
++ omap4_auxcoreboot_reg0);
+ smp_wmb();
+
+ /*
+@@ -130,6 +135,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
+ {
+ unsigned int ncores = get_core_count();
+ unsigned int cpu = smp_processor_id();
++ void __iomem *omap4_wkupgen_base;
+ int i;
+
+ /* sanity check */
+@@ -161,6 +167,16 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+
++ /* Never released */
++ omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
++ BUG_ON(!omap4_wkupgen_base);
++ omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800;
++ omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x804;
++
++ /* Never released */
++ scu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
++ BUG_ON(!scu_base);
++
+ if (max_cpus > 1) {
+ /*
+ * Enable the local timer or broadcast device for the
+diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
+index d2e0f1c..8ac8798 100644
+--- a/arch/arm/mach-omap2/omap_hwmod.c
++++ b/arch/arm/mach-omap2/omap_hwmod.c
+@@ -496,6 +496,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
+ struct omap_hwmod_addr_space *mem;
+ int i;
+ int found = 0;
++ void __iomem *va_start;
+
+ if (!oh || oh->slaves_cnt == 0)
+ return NULL;
+@@ -509,16 +510,20 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
+ }
+ }
+
+- /* XXX use ioremap() instead? */
+-
+- if (found)
++ if (found) {
++ va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
++ if (!va_start) {
++ pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
++ return NULL;
++ }
+ pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
+- oh->name, OMAP2_IO_ADDRESS(mem->pa_start));
+- else
++ oh->name, va_start);
++ } else {
+ pr_debug("omap_hwmod: %s: no MPU register target found\n",
+ oh->name);
++ }
+
+- return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL;
++ return (found) ? va_start : NULL;
+ }
+
+ /**
+@@ -1148,6 +1153,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
+ pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
+
+ mutex_lock(&omap_hwmod_mutex);
++ iounmap(oh->_rt_va);
+ list_del(&oh->node);
+ mutex_unlock(&omap_hwmod_mutex);
+
+diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
+index 2fc4d6a..deed1dd 100644
+--- a/arch/arm/mach-omap2/pm-debug.c
++++ b/arch/arm/mach-omap2/pm-debug.c
+@@ -51,7 +51,8 @@ int omap2_pm_debug;
+ regs[reg_count++].val = __raw_readl(reg)
+ #define DUMP_INTC_REG(reg, off) \
+ regs[reg_count].name = #reg; \
+- regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
++ regs[reg_count++].val = \
++ __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
+
+ static int __init pm_dbg_init(void);
+
+diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
+index 03c467c..a117f85 100644
+--- a/arch/arm/mach-omap2/prm.h
++++ b/arch/arm/mach-omap2/prm.h
+@@ -17,11 +17,11 @@
+ #include "prcm-common.h"
+
+ #define OMAP2420_PRM_REGADDR(module, reg) \
+- OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
++ OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+ #define OMAP2430_PRM_REGADDR(module, reg) \
+- OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
++ OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+ #define OMAP34XX_PRM_REGADDR(module, reg) \
+- OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
++ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+
+ /*
+ * Architecture-specific global PRM registers
+diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
+index 0837eda..345183d 100644
+--- a/arch/arm/mach-omap2/sdrc.h
++++ b/arch/arm/mach-omap2/sdrc.h
+@@ -48,9 +48,12 @@ static inline u32 sms_read_reg(u16 reg)
+ return __raw_readl(OMAP_SMS_REGADDR(reg));
+ }
+ #else
+-#define OMAP242X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+-#define OMAP243X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+-#define OMAP34XX_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
++#define OMAP242X_SDRC_REGADDR(reg) \
++ OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
++#define OMAP243X_SDRC_REGADDR(reg) \
++ OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
++#define OMAP34XX_SDRC_REGADDR(reg) \
++ OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+ #endif /* __ASSEMBLER__ */
+
+ #endif
+diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
+index ae21868..7f722a7 100644
+--- a/arch/arm/mach-omap2/serial.c
++++ b/arch/arm/mach-omap2/serial.c
+@@ -73,7 +73,6 @@ static LIST_HEAD(uart_list);
+
+ static struct plat_serial8250_port serial_platform_data0[] = {
+ {
+- .membase = OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
+ .mapbase = OMAP_UART1_BASE,
+ .irq = 72,
+ .flags = UPF_BOOT_AUTOCONF,
+@@ -87,7 +86,6 @@ static struct plat_serial8250_port serial_platform_data0[] = {
+
+ static struct plat_serial8250_port serial_platform_data1[] = {
+ {
+- .membase = OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
+ .mapbase = OMAP_UART2_BASE,
+ .irq = 73,
+ .flags = UPF_BOOT_AUTOCONF,
+@@ -101,7 +99,6 @@ static struct plat_serial8250_port serial_platform_data1[] = {
+
+ static struct plat_serial8250_port serial_platform_data2[] = {
+ {
+- .membase = OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
+ .mapbase = OMAP_UART3_BASE,
+ .irq = 74,
+ .flags = UPF_BOOT_AUTOCONF,
+@@ -110,7 +107,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
+ }, {
+ #ifdef CONFIG_ARCH_OMAP4
+- .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
+ .mapbase = OMAP_UART4_BASE,
+ .irq = 70,
+ .flags = UPF_BOOT_AUTOCONF,
+@@ -126,7 +122,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
+ #ifdef CONFIG_ARCH_OMAP4
+ static struct plat_serial8250_port serial_platform_data3[] = {
+ {
+- .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
+ .mapbase = OMAP_UART4_BASE,
+ .irq = 70,
+ .flags = UPF_BOOT_AUTOCONF,
+@@ -549,7 +544,7 @@ static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+ #define DEV_CREATE_FILE(dev, attr)
+ #endif /* CONFIG_PM */
+
+-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
++static struct omap_uart_state omap_uart[] = {
+ {
+ .pdev = {
+ .name = "serial8250",
+@@ -599,12 +594,22 @@ void __init omap_serial_early_init(void)
+ * if not needed.
+ */
+
+- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
++ for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
+ struct omap_uart_state *uart = &omap_uart[i];
+ struct platform_device *pdev = &uart->pdev;
+ struct device *dev = &pdev->dev;
+ struct plat_serial8250_port *p = dev->platform_data;
+
++ /*
++ * Module 4KB + L4 interconnect 4KB
++ * Static mapping, never released
++ */
++ p->membase = ioremap(p->mapbase, SZ_8K);
++ if (!p->membase) {
++ printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
++ continue;
++ }
++
+ sprintf(name, "uart%d_ick", i+1);
+ uart->ick = clk_get(NULL, name);
+ if (IS_ERR(uart->ick)) {
+@@ -641,7 +646,7 @@ void __init omap_serial_init(void)
+ {
+ int i;
+
+- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
++ for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
+ struct omap_uart_state *uart = &omap_uart[i];
+ struct platform_device *pdev = &uart->pdev;
+ struct device *dev = &pdev->dev;
+diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
+index 9b62208..92e6e1a 100644
+--- a/arch/arm/mach-omap2/sram242x.S
++++ b/arch/arm/mach-omap2/sram242x.S
+@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
+ prcm_mask_val:
+ .word 0xFFFF3FFC
+ omap242x_sdi_timer_32ksynct_cr:
+- .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
++ .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+ ENTRY(omap242x_sram_ddr_init_sz)
+ .word . - omap242x_sram_ddr_init
+
+@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
+ ddr_prcm_mask_val:
+ .word 0xFFFF3FFC
+ omap242x_srs_timer_32ksynct:
+- .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
++ .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+
+ ENTRY(omap242x_sram_reprogram_sdrc_sz)
+ .word . - omap242x_sram_reprogram_sdrc
+diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
+index df2cd92..ab49736 100644
+--- a/arch/arm/mach-omap2/sram243x.S
++++ b/arch/arm/mach-omap2/sram243x.S
+@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
+ prcm_mask_val:
+ .word 0xFFFF3FFC
+ omap243x_sdi_timer_32ksynct_cr:
+- .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
++ .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+ ENTRY(omap243x_sram_ddr_init_sz)
+ .word . - omap243x_sram_ddr_init
+
+@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
+ ddr_prcm_mask_val:
+ .word 0xFFFF3FFC
+ omap243x_srs_timer_32ksynct:
+- .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
++ .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+
+ ENTRY(omap243x_sram_reprogram_sdrc_sz)
+ .word . - omap243x_sram_reprogram_sdrc
+diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
+index e2338c0..cd72970 100644
+--- a/arch/arm/mach-omap2/timer-gp.c
++++ b/arch/arm/mach-omap2/timer-gp.c
+@@ -231,7 +231,8 @@ static void __init omap2_gp_clocksource_init(void)
+ static void __init omap2_gp_timer_init(void)
+ {
+ #ifdef CONFIG_LOCAL_TIMERS
+- twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
++ twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
++ BUG_ON(!twd_base);
+ #endif
+ omap_dm_timer_init();
+
+diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
+new file mode 100644
+index 0000000..a29c8ca
+--- /dev/null
++++ b/arch/arm/mach-omap2/usb-ehci.c
+@@ -0,0 +1,192 @@
++/*
++ * linux/arch/arm/mach-omap2/usb-ehci.c
++ *
++ * This file will contain the board specific details for the
++ * Synopsys EHCI host controller on OMAP3430
++ *
++ * Copyright (C) 2007 Texas Instruments
++ * Author: Vikram Pandita <vikram.pandita@ti.com>
++ *
++ * Generalization by:
++ * Felipe Balbi <felipe.balbi@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <asm/io.h>
++#include <mach/mux.h>
++
++#include <mach/hardware.h>
++#include <mach/irqs.h>
++#include <mach/usb.h>
++
++#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
++
++static struct resource ehci_resources[] = {
++ {
++ .start = OMAP34XX_EHCI_BASE,
++ .end = OMAP34XX_EHCI_BASE + SZ_1K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = OMAP34XX_UHH_CONFIG_BASE,
++ .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = OMAP34XX_USBTLL_BASE,
++ .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ { /* general IRQ */
++ .start = INT_34XX_EHCI_IRQ,
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static u64 ehci_dmamask = ~(u32)0;
++static struct platform_device ehci_device = {
++ .name = "ehci-omap",
++ .id = 0,
++ .dev = {
++ .dma_mask = &ehci_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ .platform_data = NULL,
++ },
++ .num_resources = ARRAY_SIZE(ehci_resources),
++ .resource = ehci_resources,
++};
++
++/* MUX settings for EHCI pins */
++/*
++ * setup_ehci_io_mux - initialize IO pad mux for USBHOST
++ */
++static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
++{
++ switch (port_mode[0]) {
++ case EHCI_HCD_OMAP_MODE_PHY:
++ omap_cfg_reg(Y9_3430_USB1HS_PHY_STP);
++ omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK);
++ omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR);
++ omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT);
++ omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0);
++ omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1);
++ omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2);
++ omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3);
++ omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4);
++ omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5);
++ omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6);
++ omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7);
++ break;
++ case EHCI_HCD_OMAP_MODE_TLL:
++ omap_cfg_reg(Y9_3430_USB1HS_TLL_STP);
++ omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK);
++ omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR);
++ omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT);
++ omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0);
++ omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1);
++ omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2);
++ omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3);
++ omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4);
++ omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5);
++ omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6);
++ omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7);
++ break;
++ case EHCI_HCD_OMAP_MODE_UNKNOWN:
++ /* FALLTHROUGH */
++ default:
++ break;
++ }
++
++ switch (port_mode[1]) {
++ case EHCI_HCD_OMAP_MODE_PHY:
++ omap_cfg_reg(AA10_3430_USB2HS_PHY_STP);
++ omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK);
++ omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR);
++ omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT);
++ omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0);
++ omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1);
++ omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2);
++ omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3);
++ omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4);
++ omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5);
++ omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6);
++ omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7);
++ break;
++ case EHCI_HCD_OMAP_MODE_TLL:
++ omap_cfg_reg(AA10_3430_USB2HS_TLL_STP);
++ omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK);
++ omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR);
++ omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT);
++ omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0);
++ omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1);
++ omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2);
++ omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3);
++ omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4);
++ omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5);
++ omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6);
++ omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7);
++ break;
++ case EHCI_HCD_OMAP_MODE_UNKNOWN:
++ /* FALLTHROUGH */
++ default:
++ break;
++ }
++
++ switch (port_mode[2]) {
++ case EHCI_HCD_OMAP_MODE_PHY:
++ printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
++ break;
++ case EHCI_HCD_OMAP_MODE_TLL:
++ omap_cfg_reg(AB3_3430_USB3HS_TLL_STP);
++ omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK);
++ omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR);
++ omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT);
++ omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0);
++ omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1);
++ omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2);
++ omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3);
++ omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4);
++ omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5);
++ omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6);
++ omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7);
++ break;
++ case EHCI_HCD_OMAP_MODE_UNKNOWN:
++ /* FALLTHROUGH */
++ default:
++ break;
++ }
++
++ return;
++}
++
++void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
++{
++ platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
++
++ /* Setup Pin IO MUX for EHCI */
++ if (cpu_is_omap34xx())
++ setup_ehci_io_mux(pdata->port_mode);
++
++ if (platform_device_register(&ehci_device) < 0) {
++ printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
++ return;
++ }
++}
++
++#else
++
++void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
++
++{
++}
++
++#endif /* CONFIG_USB_EHCI_HCD */
++
+diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
+index 3a4768d..1aa58d2 100644
+--- a/arch/arm/plat-omap/common.c
++++ b/arch/arm/plat-omap/common.c
+@@ -224,12 +224,12 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
+
+ static struct omap_globals omap242x_globals = {
+ .class = OMAP242X_CLASS,
+- .tap = OMAP2_IO_ADDRESS(0x48014000),
+- .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
+- .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
+- .ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
+- .prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
+- .cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
++ .tap = OMAP2_L4_IO_ADDRESS(0x48014000),
++ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
++ .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
++ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
++ .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
++ .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
+ };
+
+ void __init omap2_set_globals_242x(void)
+@@ -242,12 +242,12 @@ void __init omap2_set_globals_242x(void)
+
+ static struct omap_globals omap243x_globals = {
+ .class = OMAP243X_CLASS,
+- .tap = OMAP2_IO_ADDRESS(0x4900a000),
+- .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
+- .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
+- .ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
+- .prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
+- .cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
++ .tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
++ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
++ .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
++ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
++ .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
++ .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
+ };
+
+ void __init omap2_set_globals_243x(void)
+@@ -260,12 +260,12 @@ void __init omap2_set_globals_243x(void)
+
+ static struct omap_globals omap343x_globals = {
+ .class = OMAP343X_CLASS,
+- .tap = OMAP2_IO_ADDRESS(0x4830A000),
+- .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
+- .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
+- .ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
+- .prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
+- .cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
++ .tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
++ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
++ .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
++ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
++ .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
++ .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
+ };
+
+ void __init omap2_set_globals_343x(void)
+@@ -277,10 +277,10 @@ void __init omap2_set_globals_343x(void)
+ #if defined(CONFIG_ARCH_OMAP4)
+ static struct omap_globals omap4_globals = {
+ .class = OMAP443X_CLASS,
+- .tap = OMAP2_IO_ADDRESS(0x4830a000),
+- .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+- .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+- .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
++ .tap = OMAP2_L4_IO_ADDRESS(0x4830a000),
++ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
++ .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
++ .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+ };
+
+ void __init omap2_set_globals_443x(void)
+diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
+index a64b692..d2f5475 100644
+--- a/arch/arm/plat-omap/devices.c
++++ b/arch/arm/plat-omap/devices.c
+@@ -113,17 +113,17 @@ static void omap_init_kp(void)
+ omap_cfg_reg(E19_1610_KBR4);
+ omap_cfg_reg(N19_1610_KBR5);
+ } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
+- omap_cfg_reg(E2_730_KBR0);
+- omap_cfg_reg(J7_730_KBR1);
+- omap_cfg_reg(E1_730_KBR2);
+- omap_cfg_reg(F3_730_KBR3);
+- omap_cfg_reg(D2_730_KBR4);
+-
+- omap_cfg_reg(C2_730_KBC0);
+- omap_cfg_reg(D3_730_KBC1);
+- omap_cfg_reg(E4_730_KBC2);
+- omap_cfg_reg(F4_730_KBC3);
+- omap_cfg_reg(E3_730_KBC4);
++ omap_cfg_reg(E2_7XX_KBR0);
++ omap_cfg_reg(J7_7XX_KBR1);
++ omap_cfg_reg(E1_7XX_KBR2);
++ omap_cfg_reg(F3_7XX_KBR3);
++ omap_cfg_reg(D2_7XX_KBR4);
++
++ omap_cfg_reg(C2_7XX_KBC0);
++ omap_cfg_reg(D3_7XX_KBC1);
++ omap_cfg_reg(E4_7XX_KBC2);
++ omap_cfg_reg(F4_7XX_KBC3);
++ omap_cfg_reg(E3_7XX_KBC4);
+ } else if (machine_is_omap_h4()) {
+ omap_cfg_reg(T19_24XX_KBR0);
+ omap_cfg_reg(R19_24XX_KBR1);
+diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
+index 0eb676d..034686d 100644
+--- a/arch/arm/plat-omap/dma.c
++++ b/arch/arm/plat-omap/dma.c
+@@ -2347,40 +2347,46 @@ EXPORT_SYMBOL(omap_stop_lcd_dma);
+
+ static int __init omap_init_dma(void)
+ {
++ unsigned long base;
+ int ch, r;
+
+ if (cpu_class_is_omap1()) {
+- omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
++ base = OMAP1_DMA_BASE;
+ dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap24xx()) {
+- omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
++ base = OMAP24XX_DMA4_BASE;
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap34xx()) {
+- omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
++ base = OMAP34XX_DMA4_BASE;
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap44xx()) {
+- omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
++ base = OMAP44XX_DMA4_BASE;
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else {
+ pr_err("DMA init failed for unsupported omap\n");
+ return -ENODEV;
+ }
+
++ omap_dma_base = ioremap(base, SZ_4K);
++ BUG_ON(!omap_dma_base);
++
+ if (cpu_class_is_omap2() && omap_dma_reserve_channels
+ && (omap_dma_reserve_channels <= dma_lch_count))
+ dma_lch_count = omap_dma_reserve_channels;
+
+ dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
+ GFP_KERNEL);
+- if (!dma_chan)
+- return -ENOMEM;
++ if (!dma_chan) {
++ r = -ENOMEM;
++ goto out_unmap;
++ }
+
+ if (cpu_class_is_omap2()) {
+ dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
+ dma_lch_count, GFP_KERNEL);
+ if (!dma_linked_lch) {
+- kfree(dma_chan);
+- return -ENOMEM;
++ r = -ENOMEM;
++ goto out_free;
+ }
+ }
+
+@@ -2454,7 +2460,7 @@ static int __init omap_init_dma(void)
+ for (i = 0; i < ch; i++)
+ free_irq(omap1_dma_irq[i],
+ (void *) (i + 1));
+- return r;
++ goto out_free;
+ }
+ }
+ }
+@@ -2496,11 +2502,19 @@ static int __init omap_init_dma(void)
+ "(error %d)\n", r);
+ for (i = 0; i < dma_chan_count; i++)
+ free_irq(omap1_dma_irq[i], (void *) (i + 1));
+- return r;
++ goto out_free;
+ }
+ }
+
+ return 0;
++
++out_free:
++ kfree(dma_chan);
++
++out_unmap:
++ iounmap(omap_dma_base);
++
++ return r;
+ }
+
+ arch_initcall(omap_init_dma);
+diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
+index d325b54..e4e848e 100644
+--- a/arch/arm/plat-omap/dmtimer.c
++++ b/arch/arm/plat-omap/dmtimer.c
+@@ -742,16 +742,17 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
+ int __init omap_dm_timer_init(void)
+ {
+ struct omap_dm_timer *timer;
+- int i;
++ int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
+
+ if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
+ return -ENODEV;
+
+ spin_lock_init(&dm_timer_lock);
+
+- if (cpu_class_is_omap1())
++ if (cpu_class_is_omap1()) {
+ dm_timers = omap1_dm_timers;
+- else if (cpu_is_omap24xx()) {
++ map_size = SZ_2K;
++ } else if (cpu_is_omap24xx()) {
+ dm_timers = omap2_dm_timers;
+ dm_source_names = omap2_dm_source_names;
+ dm_source_clocks = omap2_dm_source_clocks;
+@@ -774,10 +775,11 @@ int __init omap_dm_timer_init(void)
+
+ for (i = 0; i < dm_timer_count; i++) {
+ timer = &dm_timers[i];
+- if (cpu_class_is_omap1())
+- timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
+- else
+- timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
++
++ /* Static mapping, never released */
++ timer->io_base = ioremap(timer->phys_base, map_size);
++ BUG_ON(!timer->io_base);
++
+ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
+ if (cpu_class_is_omap2()) {
+diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
+index 71ebd7f..14c3506 100644
+--- a/arch/arm/plat-omap/gpio.c
++++ b/arch/arm/plat-omap/gpio.c
+@@ -31,7 +31,7 @@
+ /*
+ * OMAP1510 GPIO registers
+ */
+-#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000)
++#define OMAP1510_GPIO_BASE 0xfffce000
+ #define OMAP1510_GPIO_DATA_INPUT 0x00
+ #define OMAP1510_GPIO_DATA_OUTPUT 0x04
+ #define OMAP1510_GPIO_DIR_CONTROL 0x08
+@@ -45,10 +45,10 @@
+ /*
+ * OMAP1610 specific GPIO registers
+ */
+-#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400)
+-#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00)
+-#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400)
+-#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00)
++#define OMAP1610_GPIO1_BASE 0xfffbe400
++#define OMAP1610_GPIO2_BASE 0xfffbec00
++#define OMAP1610_GPIO3_BASE 0xfffbb400
++#define OMAP1610_GPIO4_BASE 0xfffbbc00
+ #define OMAP1610_GPIO_REVISION 0x0000
+ #define OMAP1610_GPIO_SYSCONFIG 0x0010
+ #define OMAP1610_GPIO_SYSSTATUS 0x0014
+@@ -68,52 +68,36 @@
+ #define OMAP1610_GPIO_SET_DATAOUT 0x00f0
+
+ /*
+- * OMAP730 specific GPIO registers
++ * OMAP7XX specific GPIO registers
+ */
+-#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
+-#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
+-#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
+-#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
+-#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
+-#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
+-#define OMAP730_GPIO_DATA_INPUT 0x00
+-#define OMAP730_GPIO_DATA_OUTPUT 0x04
+-#define OMAP730_GPIO_DIR_CONTROL 0x08
+-#define OMAP730_GPIO_INT_CONTROL 0x0c
+-#define OMAP730_GPIO_INT_MASK 0x10
+-#define OMAP730_GPIO_INT_STATUS 0x14
+-
+-/*
+- * OMAP850 specific GPIO registers
+- */
+-#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
+-#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
+-#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
+-#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
+-#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
+-#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
+-#define OMAP850_GPIO_DATA_INPUT 0x00
+-#define OMAP850_GPIO_DATA_OUTPUT 0x04
+-#define OMAP850_GPIO_DIR_CONTROL 0x08
+-#define OMAP850_GPIO_INT_CONTROL 0x0c
+-#define OMAP850_GPIO_INT_MASK 0x10
+-#define OMAP850_GPIO_INT_STATUS 0x14
+-
+-#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
++#define OMAP7XX_GPIO1_BASE 0xfffbc000
++#define OMAP7XX_GPIO2_BASE 0xfffbc800
++#define OMAP7XX_GPIO3_BASE 0xfffbd000
++#define OMAP7XX_GPIO4_BASE 0xfffbd800
++#define OMAP7XX_GPIO5_BASE 0xfffbe000
++#define OMAP7XX_GPIO6_BASE 0xfffbe800
++#define OMAP7XX_GPIO_DATA_INPUT 0x00
++#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
++#define OMAP7XX_GPIO_DIR_CONTROL 0x08
++#define OMAP7XX_GPIO_INT_CONTROL 0x0c
++#define OMAP7XX_GPIO_INT_MASK 0x10
++#define OMAP7XX_GPIO_INT_STATUS 0x14
++
++#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
+
+ /*
+ * omap24xx specific GPIO registers
+ */
+-#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000)
+-#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000)
+-#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000)
+-#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000)
++#define OMAP242X_GPIO1_BASE 0x48018000
++#define OMAP242X_GPIO2_BASE 0x4801a000
++#define OMAP242X_GPIO3_BASE 0x4801c000
++#define OMAP242X_GPIO4_BASE 0x4801e000
+
+-#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000)
+-#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000)
+-#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000)
+-#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000)
+-#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000)
++#define OMAP243X_GPIO1_BASE 0x4900C000
++#define OMAP243X_GPIO2_BASE 0x4900E000
++#define OMAP243X_GPIO3_BASE 0x49010000
++#define OMAP243X_GPIO4_BASE 0x49012000
++#define OMAP243X_GPIO5_BASE 0x480B6000
+
+ #define OMAP24XX_GPIO_REVISION 0x0000
+ #define OMAP24XX_GPIO_SYSCONFIG 0x0010
+@@ -170,24 +154,25 @@
+ * omap34xx specific GPIO registers
+ */
+
+-#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000)
+-#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000)
+-#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000)
+-#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000)
+-#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000)
+-#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000)
++#define OMAP34XX_GPIO1_BASE 0x48310000
++#define OMAP34XX_GPIO2_BASE 0x49050000
++#define OMAP34XX_GPIO3_BASE 0x49052000
++#define OMAP34XX_GPIO4_BASE 0x49054000
++#define OMAP34XX_GPIO5_BASE 0x49056000
++#define OMAP34XX_GPIO6_BASE 0x49058000
+
+ /*
+ * OMAP44XX specific GPIO registers
+ */
+-#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000)
+-#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000)
+-#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000)
+-#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000)
+-#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000)
+-#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000)
++#define OMAP44XX_GPIO1_BASE 0x4a310000
++#define OMAP44XX_GPIO2_BASE 0x48055000
++#define OMAP44XX_GPIO3_BASE 0x48057000
++#define OMAP44XX_GPIO4_BASE 0x48059000
++#define OMAP44XX_GPIO5_BASE 0x4805B000
++#define OMAP44XX_GPIO6_BASE 0x4805D000
+
+ struct gpio_bank {
++ unsigned long pbase;
+ void __iomem *base;
+ u16 irq;
+ u16 virtual_irq_start;
+@@ -215,96 +200,111 @@ struct gpio_bank {
+ #define METHOD_MPUIO 0
+ #define METHOD_GPIO_1510 1
+ #define METHOD_GPIO_1610 2
+-#define METHOD_GPIO_730 3
+-#define METHOD_GPIO_850 4
++#define METHOD_GPIO_7XX 3
+ #define METHOD_GPIO_24XX 5
+
+ #ifdef CONFIG_ARCH_OMAP16XX
+ static struct gpio_bank gpio_bank_1610[5] = {
+- { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
+- { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 },
+- { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
+- { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
+- { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 },
++ { OMAP1_MPUIO_VBASE, 0, INT_MPUIO, IH_MPUIO_BASE,
++ METHOD_MPUIO },
++ { OMAP1610_GPIO1_BASE, 0, INT_GPIO_BANK1, IH_GPIO_BASE,
++ METHOD_GPIO_1610 },
++ { OMAP1610_GPIO2_BASE, 0, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16,
++ METHOD_GPIO_1610 },
++ { OMAP1610_GPIO3_BASE, 0, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32,
++ METHOD_GPIO_1610 },
++ { OMAP1610_GPIO4_BASE, 0, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48,
++ METHOD_GPIO_1610 },
+ };
+ #endif
+
+ #ifdef CONFIG_ARCH_OMAP15XX
+ static struct gpio_bank gpio_bank_1510[2] = {
+- { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+- { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 }
+-};
+-#endif
+-
+-#ifdef CONFIG_ARCH_OMAP730
+-static struct gpio_bank gpio_bank_730[7] = {
+- { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+- { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
+- { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 },
+- { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 },
+- { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 },
+- { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 },
+- { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 },
++ { OMAP1_MPUIO_VBASE, 0, INT_MPUIO, IH_MPUIO_BASE,
++ METHOD_MPUIO },
++ { OMAP1510_GPIO_BASE, 0, INT_GPIO_BANK1, IH_GPIO_BASE,
++ METHOD_GPIO_1510 }
+ };
+ #endif
+
+-#ifdef CONFIG_ARCH_OMAP850
+-static struct gpio_bank gpio_bank_850[7] = {
+- { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+- { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 },
+- { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 },
+- { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 },
+- { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 },
+- { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 },
+- { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 },
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++static struct gpio_bank gpio_bank_7xx[7] = {
++ { OMAP1_MPUIO_VBASE, 0, INT_7XX_MPUIO, IH_MPUIO_BASE,
++ METHOD_MPUIO },
++ { OMAP7XX_GPIO1_BASE, 0, INT_7XX_GPIO_BANK1, IH_GPIO_BASE,
++ METHOD_GPIO_7XX },
++ { OMAP7XX_GPIO2_BASE, 0, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32,
++ METHOD_GPIO_7XX },
++ { OMAP7XX_GPIO3_BASE, 0, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64,
++ METHOD_GPIO_7XX },
++ { OMAP7XX_GPIO4_BASE, 0, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96,
++ METHOD_GPIO_7XX },
++ { OMAP7XX_GPIO5_BASE, 0, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128,
++ METHOD_GPIO_7XX },
++ { OMAP7XX_GPIO6_BASE, 0, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160,
++ METHOD_GPIO_7XX },
+ };
+ #endif
+
+-
+ #ifdef CONFIG_ARCH_OMAP24XX
+
+ static struct gpio_bank gpio_bank_242x[4] = {
+- { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
+- { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
+- { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
+- { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
++ { OMAP242X_GPIO1_BASE, 0, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
++ METHOD_GPIO_24XX },
++ { OMAP242X_GPIO2_BASE, 0, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
++ METHOD_GPIO_24XX },
++ { OMAP242X_GPIO3_BASE, 0, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
++ METHOD_GPIO_24XX },
++ { OMAP242X_GPIO4_BASE, 0, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
++ METHOD_GPIO_24XX },
+ };
+
+ static struct gpio_bank gpio_bank_243x[5] = {
+- { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
+- { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
+- { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
+- { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
+- { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
++ { OMAP243X_GPIO1_BASE, 0, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
++ METHOD_GPIO_24XX },
++ { OMAP243X_GPIO2_BASE, 0, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
++ METHOD_GPIO_24XX },
++ { OMAP243X_GPIO3_BASE, 0, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
++ METHOD_GPIO_24XX },
++ { OMAP243X_GPIO4_BASE, 0, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
++ METHOD_GPIO_24XX },
++ { OMAP243X_GPIO5_BASE, 0, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
++ METHOD_GPIO_24XX },
+ };
+
+ #endif
+
+ #ifdef CONFIG_ARCH_OMAP34XX
+ static struct gpio_bank gpio_bank_34xx[6] = {
+- { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
+- { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
+- { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
+- { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
+- { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
+- { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX },
++ { OMAP34XX_GPIO1_BASE, 0, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
++ METHOD_GPIO_24XX },
++ { OMAP34XX_GPIO2_BASE, 0, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,
++ METHOD_GPIO_24XX },
++ { OMAP34XX_GPIO3_BASE, 0, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,
++ METHOD_GPIO_24XX },
++ { OMAP34XX_GPIO4_BASE, 0, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,
++ METHOD_GPIO_24XX },
++ { OMAP34XX_GPIO5_BASE, 0, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128,
++ METHOD_GPIO_24XX },
++ { OMAP34XX_GPIO6_BASE, 0, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160,
++ METHOD_GPIO_24XX },
+ };
+
+ #endif
+
+ #ifdef CONFIG_ARCH_OMAP4
+ static struct gpio_bank gpio_bank_44xx[6] = {
+- { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \
++ { OMAP44XX_GPIO1_BASE, 0, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,
+ METHOD_GPIO_24XX },
+- { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \
++ { OMAP44XX_GPIO2_BASE, 0, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+ METHOD_GPIO_24XX },
+- { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \
++ { OMAP44XX_GPIO3_BASE, 0, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+ METHOD_GPIO_24XX },
+- { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \
++ { OMAP44XX_GPIO4_BASE, 0, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+ METHOD_GPIO_24XX },
+- { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
++ { OMAP44XX_GPIO5_BASE, 0, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+ METHOD_GPIO_24XX },
+- { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
++ { OMAP44XX_GPIO6_BASE, 0, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160,
+ METHOD_GPIO_24XX },
+ };
+
+@@ -373,7 +373,7 @@ static inline int gpio_valid(int gpio)
+
+ static int check_gpio(int gpio)
+ {
+- if (unlikely(gpio_valid(gpio)) < 0) {
++ if (unlikely(gpio_valid(gpio) < 0)) {
+ printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
+ dump_stack();
+ return -1;
+@@ -402,14 +402,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
+ reg += OMAP1610_GPIO_DIRECTION;
+ break;
+ #endif
+-#ifdef CONFIG_ARCH_OMAP730
+- case METHOD_GPIO_730:
+- reg += OMAP730_GPIO_DIR_CONTROL;
+- break;
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- case METHOD_GPIO_850:
+- reg += OMAP850_GPIO_DIR_CONTROL;
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ case METHOD_GPIO_7XX:
++ reg += OMAP7XX_GPIO_DIR_CONTROL;
+ break;
+ #endif
+ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+@@ -469,19 +464,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
+ l = 1 << gpio;
+ break;
+ #endif
+-#ifdef CONFIG_ARCH_OMAP730
+- case METHOD_GPIO_730:
+- reg += OMAP730_GPIO_DATA_OUTPUT;
+- l = __raw_readl(reg);
+- if (enable)
+- l |= 1 << gpio;
+- else
+- l &= ~(1 << gpio);
+- break;
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- case METHOD_GPIO_850:
+- reg += OMAP850_GPIO_DATA_OUTPUT;
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ case METHOD_GPIO_7XX:
++ reg += OMAP7XX_GPIO_DATA_OUTPUT;
+ l = __raw_readl(reg);
+ if (enable)
+ l |= 1 << gpio;
+@@ -537,14 +522,9 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
+ reg += OMAP1610_GPIO_DATAIN;
+ break;
+ #endif
+-#ifdef CONFIG_ARCH_OMAP730
+- case METHOD_GPIO_730:
+- reg += OMAP730_GPIO_DATA_INPUT;
+- break;
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- case METHOD_GPIO_850:
+- reg += OMAP850_GPIO_DATA_INPUT;
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ case METHOD_GPIO_7XX:
++ reg += OMAP7XX_GPIO_DATA_INPUT;
+ break;
+ #endif
+ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+@@ -588,14 +568,9 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+ reg += OMAP1610_GPIO_DATAOUT;
+ break;
+ #endif
+-#ifdef CONFIG_ARCH_OMAP730
+- case METHOD_GPIO_730:
+- reg += OMAP730_GPIO_DATA_OUTPUT;
+- break;
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- case METHOD_GPIO_850:
+- reg += OMAP850_GPIO_DATA_OUTPUT;
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ case METHOD_GPIO_7XX:
++ reg += OMAP7XX_GPIO_DATA_OUTPUT;
+ break;
+ #endif
+ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+@@ -797,21 +772,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
+ __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
+ break;
+ #endif
+-#ifdef CONFIG_ARCH_OMAP730
+- case METHOD_GPIO_730:
+- reg += OMAP730_GPIO_INT_CONTROL;
+- l = __raw_readl(reg);
+- if (trigger & IRQ_TYPE_EDGE_RISING)
+- l |= 1 << gpio;
+- else if (trigger & IRQ_TYPE_EDGE_FALLING)
+- l &= ~(1 << gpio);
+- else
+- goto bad;
+- break;
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- case METHOD_GPIO_850:
+- reg += OMAP850_GPIO_INT_CONTROL;
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ case METHOD_GPIO_7XX:
++ reg += OMAP7XX_GPIO_INT_CONTROL;
+ l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_RISING)
+ l |= 1 << gpio;
+@@ -897,14 +860,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+ reg += OMAP1610_GPIO_IRQSTATUS1;
+ break;
+ #endif
+-#ifdef CONFIG_ARCH_OMAP730
+- case METHOD_GPIO_730:
+- reg += OMAP730_GPIO_INT_STATUS;
+- break;
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- case METHOD_GPIO_850:
+- reg += OMAP850_GPIO_INT_STATUS;
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ case METHOD_GPIO_7XX:
++ reg += OMAP7XX_GPIO_INT_STATUS;
+ break;
+ #endif
+ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+@@ -971,16 +929,9 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
+ mask = 0xffff;
+ break;
+ #endif
+-#ifdef CONFIG_ARCH_OMAP730
+- case METHOD_GPIO_730:
+- reg += OMAP730_GPIO_INT_MASK;
+- mask = 0xffffffff;
+- inv = 1;
+- break;
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- case METHOD_GPIO_850:
+- reg += OMAP850_GPIO_INT_MASK;
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ case METHOD_GPIO_7XX:
++ reg += OMAP7XX_GPIO_INT_MASK;
+ mask = 0xffffffff;
+ inv = 1;
+ break;
+@@ -1044,19 +995,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
+ l = gpio_mask;
+ break;
+ #endif
+-#ifdef CONFIG_ARCH_OMAP730
+- case METHOD_GPIO_730:
+- reg += OMAP730_GPIO_INT_MASK;
+- l = __raw_readl(reg);
+- if (enable)
+- l &= ~(gpio_mask);
+- else
+- l |= gpio_mask;
+- break;
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- case METHOD_GPIO_850:
+- reg += OMAP850_GPIO_INT_MASK;
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ case METHOD_GPIO_7XX:
++ reg += OMAP7XX_GPIO_INT_MASK;
+ l = __raw_readl(reg);
+ if (enable)
+ l &= ~(gpio_mask);
+@@ -1249,13 +1190,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+ if (bank->method == METHOD_GPIO_1610)
+ isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
+ #endif
+-#ifdef CONFIG_ARCH_OMAP730
+- if (bank->method == METHOD_GPIO_730)
+- isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- if (bank->method == METHOD_GPIO_850)
+- isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ if (bank->method == METHOD_GPIO_7XX)
++ isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
+ #endif
+ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+ if (bank->method == METHOD_GPIO_24XX)
+@@ -1524,11 +1461,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_DIRECTION;
+ break;
+- case METHOD_GPIO_730:
+- reg += OMAP730_GPIO_DIR_CONTROL;
+- break;
+- case METHOD_GPIO_850:
+- reg += OMAP850_GPIO_DIR_CONTROL;
++ case METHOD_GPIO_7XX:
++ reg += OMAP7XX_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_OE;
+@@ -1607,6 +1541,23 @@ static struct clk * gpio5_fck;
+ static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
+ #endif
+
++static void __init omap_gpio_show_rev(void)
++{
++ u32 rev;
++
++ if (cpu_is_omap16xx())
++ rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
++ else if (cpu_is_omap24xx() || cpu_is_omap34xx())
++ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
++ else if (cpu_is_omap44xx())
++ rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
++ else
++ return;
++
++ printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
++ (rev >> 4) & 0x0f, rev & 0x0f);
++}
++
+ /* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+@@ -1617,6 +1568,7 @@ static int __init _omap_gpio_init(void)
+ int i;
+ int gpio = 0;
+ struct gpio_bank *bank;
++ int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
+ char clk_name[11];
+
+ initialized = 1;
+@@ -1679,77 +1631,45 @@ static int __init _omap_gpio_init(void)
+
+ #ifdef CONFIG_ARCH_OMAP15XX
+ if (cpu_is_omap15xx()) {
+- printk(KERN_INFO "OMAP1510 GPIO hardware\n");
+ gpio_bank_count = 2;
+ gpio_bank = gpio_bank_1510;
++ bank_size = SZ_2K;
+ }
+ #endif
+ #if defined(CONFIG_ARCH_OMAP16XX)
+ if (cpu_is_omap16xx()) {
+- u32 rev;
+-
+ gpio_bank_count = 5;
+ gpio_bank = gpio_bank_1610;
+- rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
+- printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
+- (rev >> 4) & 0x0f, rev & 0x0f);
++ bank_size = SZ_2K;
+ }
+ #endif
+-#ifdef CONFIG_ARCH_OMAP730
+- if (cpu_is_omap730()) {
+- printk(KERN_INFO "OMAP730 GPIO hardware\n");
+- gpio_bank_count = 7;
+- gpio_bank = gpio_bank_730;
+- }
+-#endif
+-#ifdef CONFIG_ARCH_OMAP850
+- if (cpu_is_omap850()) {
+- printk(KERN_INFO "OMAP850 GPIO hardware\n");
++#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++ if (cpu_is_omap7xx()) {
+ gpio_bank_count = 7;
+- gpio_bank = gpio_bank_850;
++ gpio_bank = gpio_bank_7xx;
++ bank_size = SZ_2K;
+ }
+ #endif
+-
+ #ifdef CONFIG_ARCH_OMAP24XX
+ if (cpu_is_omap242x()) {
+- int rev;
+-
+ gpio_bank_count = 4;
+ gpio_bank = gpio_bank_242x;
+- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+- printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
+- (rev >> 4) & 0x0f, rev & 0x0f);
+ }
+ if (cpu_is_omap243x()) {
+- int rev;
+-
+ gpio_bank_count = 5;
+ gpio_bank = gpio_bank_243x;
+- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+- printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
+- (rev >> 4) & 0x0f, rev & 0x0f);
+ }
+ #endif
+ #ifdef CONFIG_ARCH_OMAP34XX
+ if (cpu_is_omap34xx()) {
+- int rev;
+-
+ gpio_bank_count = OMAP34XX_NR_GPIOS;
+ gpio_bank = gpio_bank_34xx;
+- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+- printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
+- (rev >> 4) & 0x0f, rev & 0x0f);
+ }
+ #endif
+ #ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+- int rev;
+-
+ gpio_bank_count = OMAP34XX_NR_GPIOS;
+ gpio_bank = gpio_bank_44xx;
+- rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
+- printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+- (rev >> 4) & 0x0f, rev & 0x0f);
+ }
+ #endif
+ for (i = 0; i < gpio_bank_count; i++) {
+@@ -1757,6 +1677,14 @@ static int __init _omap_gpio_init(void)
+
+ bank = &gpio_bank[i];
+ spin_lock_init(&bank->lock);
++
++ /* Static mapping, never released */
++ bank->base = ioremap(bank->pbase, bank_size);
++ if (!bank->base) {
++ printk(KERN_ERR "Could not ioremap gpio bank%i\n", i);
++ continue;
++ }
++
+ if (bank_is_mpuio(bank))
+ __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
+ if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
+@@ -1768,11 +1696,11 @@ static int __init _omap_gpio_init(void)
+ __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
+ __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
+ }
+- if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
+- __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
+- __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
++ if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
++ __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK);
++ __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS);
+
+- gpio_count = 32; /* 730 has 32-bit GPIOs */
++ gpio_count = 32; /* 7xx has 32-bit GPIOs */
+ }
+
+ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+@@ -1862,6 +1790,8 @@ static int __init _omap_gpio_init(void)
+ if (cpu_is_omap34xx())
+ omap_writel(1 << 0, 0x48306814);
+
++ omap_gpio_show_rev();
++
+ return 0;
+ }
+
+@@ -2160,8 +2090,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
+
+ if (bank_is_mpuio(bank))
+ gpio = OMAP_MPUIO(0);
+- else if (cpu_class_is_omap2() || cpu_is_omap730() ||
+- cpu_is_omap850())
++ else if (cpu_class_is_omap2() || cpu_is_omap7xx())
+ bankwidth = 32;
+
+ for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
+diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
+index 826d317..fdb6300 100644
+--- a/arch/arm/plat-omap/include/mach/control.h
++++ b/arch/arm/plat-omap/include/mach/control.h
+@@ -20,15 +20,18 @@
+
+ #ifndef __ASSEMBLY__
+ #define OMAP242X_CTRL_REGADDR(reg) \
+- OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
++ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+ #define OMAP243X_CTRL_REGADDR(reg) \
+- OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
++ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+ #define OMAP343X_CTRL_REGADDR(reg) \
+- OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
++ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+ #else
+-#define OMAP242X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+-#define OMAP243X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+-#define OMAP343X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
++#define OMAP242X_CTRL_REGADDR(reg) \
++ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
++#define OMAP243X_CTRL_REGADDR(reg) \
++ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
++#define OMAP343X_CTRL_REGADDR(reg) \
++ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+ #endif /* __ASSEMBLY__ */
+
+ /*
+@@ -202,6 +205,40 @@
+ #define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
+ #define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
+
++/*
++ * CONTROL OMAP STATUS register to identify OMAP3 features
++ */
++#define OMAP3_CONTROL_OMAP_STATUS 0x044c
++
++#define OMAP3_SGX_SHIFT 13
++#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT)
++#define FEAT_SGX_FULL 0
++#define FEAT_SGX_HALF 1
++#define FEAT_SGX_NONE 2
++
++#define OMAP3_IVA_SHIFT 12
++#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT)
++#define FEAT_IVA 0
++#define FEAT_IVA_NONE 1
++
++#define OMAP3_L2CACHE_SHIFT 10
++#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT)
++#define FEAT_L2CACHE_NONE 0
++#define FEAT_L2CACHE_64KB 1
++#define FEAT_L2CACHE_128KB 2
++#define FEAT_L2CACHE_256KB 3
++
++#define OMAP3_ISP_SHIFT 5
++#define OMAP3_ISP_MASK (1<< OMAP3_ISP_SHIFT)
++#define FEAT_ISP 0
++#define FEAT_ISP_NONE 1
++
++#define OMAP3_NEON_SHIFT 4
++#define OMAP3_NEON_MASK (1<< OMAP3_NEON_SHIFT)
++#define FEAT_NEON 0
++#define FEAT_NEON_NONE 1
++
++
+ #ifndef __ASSEMBLY__
+ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
+diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
+index f129efb..7cb0556 100644
+--- a/arch/arm/plat-omap/include/mach/cpu.h
++++ b/arch/arm/plat-omap/include/mach/cpu.h
+@@ -30,6 +30,8 @@
+ #ifndef __ASM_ARCH_OMAP_CPU_H
+ #define __ASM_ARCH_OMAP_CPU_H
+
++#include <linux/bitops.h>
++
+ /*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+@@ -57,6 +59,23 @@ struct omap_chip_id {
+ unsigned int omap_rev(void);
+
+ /*
++ * Define CPU revision bits
++ *
++ * Verbose meaning of the revision bits may be different for a silicon
++ * family. This difference can be handled separately.
++ */
++#define OMAP_REVBITS_00 0x00
++#define OMAP_REVBITS_10 0x10
++#define OMAP_REVBITS_20 0x20
++#define OMAP_REVBITS_30 0x30
++#define OMAP_REVBITS_40 0x40
++
++/*
++ * Get the CPU revision for OMAP devices
++ */
++#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
++
++/*
+ * Test if multicore OMAP support is needed
+ */
+ #undef MULTI_OMAP1
+@@ -161,6 +180,7 @@ IS_OMAP_CLASS(34xx, 0x34)
+ IS_OMAP_SUBCLASS(242x, 0x242)
+ IS_OMAP_SUBCLASS(243x, 0x243)
+ IS_OMAP_SUBCLASS(343x, 0x343)
++IS_OMAP_SUBCLASS(363x, 0x363)
+
+ #define cpu_is_omap7xx() 0
+ #define cpu_is_omap15xx() 0
+@@ -301,7 +321,12 @@ IS_OMAP_TYPE(3430, 0x3430)
+ #define cpu_is_omap2422() 0
+ #define cpu_is_omap2423() 0
+ #define cpu_is_omap2430() 0
++#define cpu_is_omap3503() 0
++#define cpu_is_omap3515() 0
++#define cpu_is_omap3525() 0
++#define cpu_is_omap3530() 0
+ #define cpu_is_omap3430() 0
++#define cpu_is_omap3630() 0
+
+ /*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+@@ -351,7 +376,23 @@ IS_OMAP_TYPE(3430, 0x3430)
+
+ #if defined(CONFIG_ARCH_OMAP34XX)
+ # undef cpu_is_omap3430
++# undef cpu_is_omap3503
++# undef cpu_is_omap3515
++# undef cpu_is_omap3525
++# undef cpu_is_omap3530
+ # define cpu_is_omap3430() is_omap3430()
++# define cpu_is_omap3503 (cpu_is_omap3430() && \
++ (!omap3_has_iva()) && \
++ (!omap3_has_sgx()))
++# define cpu_is_omap3515 (cpu_is_omap3430() && \
++ (omap3_has_iva()) && \
++ (!omap3_has_sgx()))
++# define cpu_is_omap3525 (cpu_is_omap3430() && \
++ (omap3_has_sgx()) && \
++ (!omap3_has_iva()))
++# define cpu_is_omap3530 (cpu_is_omap3430())
++# undef cpu_is_omap3630
++# define cpu_is_omap3630() is_omap363x()
+ #endif
+
+ # if defined(CONFIG_ARCH_OMAP4)
+@@ -382,6 +423,14 @@ IS_OMAP_TYPE(3430, 0x3430)
+ #define OMAP3430_REV_ES3_0 0x34303034
+ #define OMAP3430_REV_ES3_1 0x34304034
+
++#define OMAP3630_REV_ES1_0 0x36300034
++
++#define OMAP35XX_CLASS 0x35000034
++#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12))
++#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12))
++#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12))
++#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12))
++
+ #define OMAP443X_CLASS 0x44300034
+
+ /*
+@@ -423,4 +472,27 @@ IS_OMAP_TYPE(3430, 0x3430)
+ int omap_chip_is(struct omap_chip_id oci);
+ void omap2_check_revision(void);
+
++/*
++ * Runtime detection of OMAP3 features
++ */
++extern u32 omap3_features;
++
++#define OMAP3_HAS_L2CACHE BIT(0)
++#define OMAP3_HAS_IVA BIT(1)
++#define OMAP3_HAS_SGX BIT(2)
++#define OMAP3_HAS_NEON BIT(3)
++#define OMAP3_HAS_ISP BIT(4)
++
++#define OMAP3_HAS_FEATURE(feat,flag) \
++static inline unsigned int omap3_has_ ##feat(void) \
++{ \
++ return (omap3_features & OMAP3_HAS_ ##flag); \
++} \
++
++OMAP3_HAS_FEATURE(l2cache, L2CACHE)
++OMAP3_HAS_FEATURE(sgx, SGX)
++OMAP3_HAS_FEATURE(iva, IVA)
++OMAP3_HAS_FEATURE(neon, NEON)
++OMAP3_HAS_FEATURE(isp, ISP)
++
+ #endif
+diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
+index ac24050..63bb06d 100644
+--- a/arch/arm/plat-omap/include/mach/debug-macro.S
++++ b/arch/arm/plat-omap/include/mach/debug-macro.S
+@@ -27,7 +27,7 @@
+
+ #elif CONFIG_ARCH_OMAP2
+ moveq \rx, #0x48000000 @ physical base address
+- movne \rx, #0xd8000000 @ virtual base
++ movne \rx, #0xfa000000 @ virtual base
+ orr \rx, \rx, #0x0006a000
+ #ifdef CONFIG_OMAP_LL_DEBUG_UART2
+ add \rx, \rx, #0x00002000 @ UART 2
+@@ -38,7 +38,7 @@
+
+ #elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+ moveq \rx, #0x48000000 @ physical base address
+- movne \rx, #0xd8000000 @ virtual base
++ movne \rx, #0xfa000000 @ virtual base
+ orr \rx, \rx, #0x0006a000
+ #ifdef CONFIG_OMAP_LL_DEBUG_UART2
+ add \rx, \rx, #0x00002000 @ UART 2
+diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
+index a559299..2aea566 100644
+--- a/arch/arm/plat-omap/include/mach/entry-macro.S
++++ b/arch/arm/plat-omap/include/mach/entry-macro.S
+@@ -17,11 +17,11 @@
+
+ #if defined(CONFIG_ARCH_OMAP1)
+
+-#if defined(CONFIG_ARCH_OMAP730) && \
++#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
+ (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+-#error "FIXME: OMAP730 doesn't support multiple-OMAP"
+-#elif defined(CONFIG_ARCH_OMAP730)
+-#define INT_IH2_IRQ INT_730_IH2_IRQ
++#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
++#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
++#define INT_IH2_IRQ INT_7XX_IH2_IRQ
+ #elif defined(CONFIG_ARCH_OMAP15XX)
+ #define INT_IH2_IRQ INT_1510_IH2_IRQ
+ #elif defined(CONFIG_ARCH_OMAP16XX)
+@@ -68,9 +68,9 @@
+
+ /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+ #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+-#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
++#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+ #elif defined(CONFIG_ARCH_OMAP34XX)
+-#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
++#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+ #endif
+ #if defined(CONFIG_ARCH_OMAP4)
+ #include <mach/omap44xx.h>
+@@ -104,6 +104,8 @@
+
+ .endm
+ #else
++#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
++
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
+index 26c1fbf..99c4241 100644
+--- a/arch/arm/plat-omap/include/mach/hardware.h
++++ b/arch/arm/plat-omap/include/mach/hardware.h
+@@ -280,7 +280,7 @@
+ * ---------------------------------------------------------------------------
+ */
+
+-#include "omap730.h"
++#include "omap7xx.h"
+ #include "omap1510.h"
+ #include "omap16xx.h"
+ #include "omap24xx.h"
+diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
+index 8d32df3..7e5319f 100644
+--- a/arch/arm/plat-omap/include/mach/io.h
++++ b/arch/arm/plat-omap/include/mach/io.h
+@@ -63,8 +63,24 @@
+ #define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
+ #define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
+
+-#define OMAP2_IO_OFFSET 0x90000000
+-#define OMAP2_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
++#define OMAP2_L3_IO_OFFSET 0x90000000
++#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
++
++
++#define OMAP2_L4_IO_OFFSET 0xb2000000
++#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
++
++#define OMAP4_L3_IO_OFFSET 0xb4000000
++#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
++
++#define OMAP4_L3_PER_IO_OFFSET 0xb1100000
++#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
++
++#define OMAP4_GPMC_IO_OFFSET 0xa9000000
++#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
++
++#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
++#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
+
+ /*
+ * ----------------------------------------------------------------------------
+@@ -83,24 +99,27 @@
+ */
+
+ /* We map both L3 and L4 on OMAP2 */
+-#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */
+-#define L3_24XX_VIRT 0xf8000000
++#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
++#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
+ #define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
+-#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */
+-#define L4_24XX_VIRT 0xd8000000
++#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
++#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
+ #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
+
+-#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
+-#define L4_WK_243X_VIRT 0xd9000000
++#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
++#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
+ #define L4_WK_243X_SIZE SZ_1M
+-#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */
+-#define OMAP243X_GPMC_VIRT 0xFE000000
++#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE
++#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
++ /* 0x6e000000 --> 0xfe000000 */
+ #define OMAP243X_GPMC_SIZE SZ_1M
+ #define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
+-#define OMAP243X_SDRC_VIRT 0xFD000000
++ /* 0x6D000000 --> 0xfd000000 */
++#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
+ #define OMAP243X_SDRC_SIZE SZ_1M
+ #define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
+-#define OMAP243X_SMS_VIRT 0xFC000000
++ /* 0x6c000000 --> 0xfc000000 */
++#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
+ #define OMAP243X_SMS_SIZE SZ_1M
+
+ /* DSP */
+@@ -121,12 +140,12 @@
+ */
+
+ /* We map both L3 and L4 on OMAP3 */
+-#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */
+-#define L3_34XX_VIRT 0xf8000000
++#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */
++#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
+ #define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
+
+-#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */
+-#define L4_34XX_VIRT 0xd8000000
++#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */
++#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+ #define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
+
+ /*
+@@ -134,28 +153,33 @@
+ * VPOM3430 was not working for Int controller
+ */
+
+-#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */
+-#define L4_WK_34XX_VIRT 0xd8300000
++#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */
++#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+ #define L4_WK_34XX_SIZE SZ_1M
+
+-#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */
+-#define L4_PER_34XX_VIRT 0xd9000000
++#define L4_PER_34XX_PHYS L4_PER_34XX_BASE
++ /* 0x49000000 --> 0xfb000000 */
++#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+ #define L4_PER_34XX_SIZE SZ_1M
+
+-#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */
+-#define L4_EMU_34XX_VIRT 0xe4000000
+-#define L4_EMU_34XX_SIZE SZ_64M
++#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE
++ /* 0x54000000 --> 0xfe800000 */
++#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
++#define L4_EMU_34XX_SIZE SZ_8M
+
+-#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */
+-#define OMAP34XX_GPMC_VIRT 0xFE000000
++#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE
++ /* 0x6e000000 --> 0xfe000000 */
++#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+ #define OMAP34XX_GPMC_SIZE SZ_1M
+
+-#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */
+-#define OMAP343X_SMS_VIRT 0xFC000000
++#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE
++ /* 0x6c000000 --> 0xfc000000 */
++#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
+ #define OMAP343X_SMS_SIZE SZ_1M
+
+-#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */
+-#define OMAP343X_SDRC_VIRT 0xFD000000
++#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE
++ /* 0x6D000000 --> 0xfd000000 */
++#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
+ #define OMAP343X_SDRC_SIZE SZ_1M
+
+ /* DSP */
+@@ -176,32 +200,54 @@
+ */
+
+ /* We map both L3 and L4 on OMAP4 */
+-#define L3_44XX_PHYS L3_44XX_BASE
+-#define L3_44XX_VIRT 0xd4000000
++#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */
++#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
+ #define L3_44XX_SIZE SZ_1M
+
+-#define L4_44XX_PHYS L4_44XX_BASE
+-#define L4_44XX_VIRT 0xda000000
++#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */
++#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+ #define L4_44XX_SIZE SZ_4M
+
+
+-#define L4_WK_44XX_PHYS L4_WK_44XX_BASE
+-#define L4_WK_44XX_VIRT 0xda300000
++#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */
++#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+ #define L4_WK_44XX_SIZE SZ_1M
+
+ #define L4_PER_44XX_PHYS L4_PER_44XX_BASE
+-#define L4_PER_44XX_VIRT 0xd8000000
++ /* 0x48000000 --> 0xfa000000 */
++#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+ #define L4_PER_44XX_SIZE SZ_4M
+
++#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE
++ /* 0x49000000 --> 0xfb000000 */
++#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
++#define L4_ABE_44XX_SIZE SZ_1M
++
+ #define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
+-#define L4_EMU_44XX_VIRT 0xe4000000
+-#define L4_EMU_44XX_SIZE SZ_64M
++ /* 0x54000000 --> 0xfe800000 */
++#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
++#define L4_EMU_44XX_SIZE SZ_8M
+
+ #define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
+-#define OMAP44XX_GPMC_VIRT 0xe0000000
++ /* 0x50000000 --> 0xf9000000 */
++#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
+ #define OMAP44XX_GPMC_SIZE SZ_1M
+
+
++#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE
++ /* 0x4c000000 --> 0xfd100000 */
++#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
++#define OMAP44XX_EMIF1_SIZE SZ_1M
++
++#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
++ /* 0x4d000000 --> 0xfd200000 */
++#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
++#define OMAP44XX_EMIF2_SIZE SZ_1M
++
++#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
++ /* 0x4e000000 --> 0xfd300000 */
++#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
++#define OMAP44XX_DMM_SIZE SZ_1M
+ /*
+ * ----------------------------------------------------------------------------
+ * Omap specific register access
+diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
+index 28a1650..6a6d028 100644
+--- a/arch/arm/plat-omap/include/mach/irqs.h
++++ b/arch/arm/plat-omap/include/mach/irqs.h
+@@ -86,49 +86,26 @@
+ #define INT_1610_SSR_FIFO_0 29
+
+ /*
+- * OMAP-730 specific IRQ numbers for interrupt handler 1
++ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+-#define INT_730_IH2_FIQ 0
+-#define INT_730_IH2_IRQ 1
+-#define INT_730_USB_NON_ISO 2
+-#define INT_730_USB_ISO 3
+-#define INT_730_ICR 4
+-#define INT_730_EAC 5
+-#define INT_730_GPIO_BANK1 6
+-#define INT_730_GPIO_BANK2 7
+-#define INT_730_GPIO_BANK3 8
+-#define INT_730_McBSP2TX 10
+-#define INT_730_McBSP2RX 11
+-#define INT_730_McBSP2RX_OVF 12
+-#define INT_730_LCD_LINE 14
+-#define INT_730_GSM_PROTECT 15
+-#define INT_730_TIMER3 16
+-#define INT_730_GPIO_BANK5 17
+-#define INT_730_GPIO_BANK6 18
+-#define INT_730_SPGIO_WR 29
+-
+-/*
+- * OMAP-850 specific IRQ numbers for interrupt handler 1
+- */
+-#define INT_850_IH2_FIQ 0
+-#define INT_850_IH2_IRQ 1
+-#define INT_850_USB_NON_ISO 2
+-#define INT_850_USB_ISO 3
+-#define INT_850_ICR 4
+-#define INT_850_EAC 5
+-#define INT_850_GPIO_BANK1 6
+-#define INT_850_GPIO_BANK2 7
+-#define INT_850_GPIO_BANK3 8
+-#define INT_850_McBSP2TX 10
+-#define INT_850_McBSP2RX 11
+-#define INT_850_McBSP2RX_OVF 12
+-#define INT_850_LCD_LINE 14
+-#define INT_850_GSM_PROTECT 15
+-#define INT_850_TIMER3 16
+-#define INT_850_GPIO_BANK5 17
+-#define INT_850_GPIO_BANK6 18
+-#define INT_850_SPGIO_WR 29
+-
++#define INT_7XX_IH2_FIQ 0
++#define INT_7XX_IH2_IRQ 1
++#define INT_7XX_USB_NON_ISO 2
++#define INT_7XX_USB_ISO 3
++#define INT_7XX_ICR 4
++#define INT_7XX_EAC 5
++#define INT_7XX_GPIO_BANK1 6
++#define INT_7XX_GPIO_BANK2 7
++#define INT_7XX_GPIO_BANK3 8
++#define INT_7XX_McBSP2TX 10
++#define INT_7XX_McBSP2RX 11
++#define INT_7XX_McBSP2RX_OVF 12
++#define INT_7XX_LCD_LINE 14
++#define INT_7XX_GSM_PROTECT 15
++#define INT_7XX_TIMER3 16
++#define INT_7XX_GPIO_BANK5 17
++#define INT_7XX_GPIO_BANK6 18
++#define INT_7XX_SPGIO_WR 29
+
+ /*
+ * IRQ numbers for interrupt handler 2
+@@ -206,120 +183,62 @@
+ #define INT_1610_SHA1MD5 (91 + IH2_BASE)
+
+ /*
+- * OMAP-730 specific IRQ numbers for interrupt handler 2
+- */
+-#define INT_730_HW_ERRORS (0 + IH2_BASE)
+-#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE)
+-#define INT_730_CFCD (2 + IH2_BASE)
+-#define INT_730_CFIREQ (3 + IH2_BASE)
+-#define INT_730_I2C (4 + IH2_BASE)
+-#define INT_730_PCC (5 + IH2_BASE)
+-#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE)
+-#define INT_730_SPI_100K_1 (7 + IH2_BASE)
+-#define INT_730_SYREN_SPI (8 + IH2_BASE)
+-#define INT_730_VLYNQ (9 + IH2_BASE)
+-#define INT_730_GPIO_BANK4 (10 + IH2_BASE)
+-#define INT_730_McBSP1TX (11 + IH2_BASE)
+-#define INT_730_McBSP1RX (12 + IH2_BASE)
+-#define INT_730_McBSP1RX_OF (13 + IH2_BASE)
+-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+-#define INT_730_UART_MODEM_1 (15 + IH2_BASE)
+-#define INT_730_MCSI (16 + IH2_BASE)
+-#define INT_730_uWireTX (17 + IH2_BASE)
+-#define INT_730_uWireRX (18 + IH2_BASE)
+-#define INT_730_SMC_CD (19 + IH2_BASE)
+-#define INT_730_SMC_IREQ (20 + IH2_BASE)
+-#define INT_730_HDQ_1WIRE (21 + IH2_BASE)
+-#define INT_730_TIMER32K (22 + IH2_BASE)
+-#define INT_730_MMC_SDIO (23 + IH2_BASE)
+-#define INT_730_UPLD (24 + IH2_BASE)
+-#define INT_730_USB_HHC_1 (27 + IH2_BASE)
+-#define INT_730_USB_HHC_2 (28 + IH2_BASE)
+-#define INT_730_USB_GENI (29 + IH2_BASE)
+-#define INT_730_USB_OTG (30 + IH2_BASE)
+-#define INT_730_CAMERA_IF (31 + IH2_BASE)
+-#define INT_730_RNG (32 + IH2_BASE)
+-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
+-#define INT_730_DBB_RF_EN (34 + IH2_BASE)
+-#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE)
+-#define INT_730_SHA1_MD5 (36 + IH2_BASE)
+-#define INT_730_SPI_100K_2 (37 + IH2_BASE)
+-#define INT_730_RNG_IDLE (38 + IH2_BASE)
+-#define INT_730_MPUIO (39 + IH2_BASE)
+-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
+-#define INT_730_LLPC_OE_RISING (42 + IH2_BASE)
+-#define INT_730_LLPC_VSYNC (43 + IH2_BASE)
+-#define INT_730_WAKE_UP_REQ (46 + IH2_BASE)
+-#define INT_730_DMA_CH6 (53 + IH2_BASE)
+-#define INT_730_DMA_CH7 (54 + IH2_BASE)
+-#define INT_730_DMA_CH8 (55 + IH2_BASE)
+-#define INT_730_DMA_CH9 (56 + IH2_BASE)
+-#define INT_730_DMA_CH10 (57 + IH2_BASE)
+-#define INT_730_DMA_CH11 (58 + IH2_BASE)
+-#define INT_730_DMA_CH12 (59 + IH2_BASE)
+-#define INT_730_DMA_CH13 (60 + IH2_BASE)
+-#define INT_730_DMA_CH14 (61 + IH2_BASE)
+-#define INT_730_DMA_CH15 (62 + IH2_BASE)
+-#define INT_730_NAND (63 + IH2_BASE)
+-
+-/*
+- * OMAP-850 specific IRQ numbers for interrupt handler 2
++ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+-#define INT_850_HW_ERRORS (0 + IH2_BASE)
+-#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE)
+-#define INT_850_CFCD (2 + IH2_BASE)
+-#define INT_850_CFIREQ (3 + IH2_BASE)
+-#define INT_850_I2C (4 + IH2_BASE)
+-#define INT_850_PCC (5 + IH2_BASE)
+-#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE)
+-#define INT_850_SPI_100K_1 (7 + IH2_BASE)
+-#define INT_850_SYREN_SPI (8 + IH2_BASE)
+-#define INT_850_VLYNQ (9 + IH2_BASE)
+-#define INT_850_GPIO_BANK4 (10 + IH2_BASE)
+-#define INT_850_McBSP1TX (11 + IH2_BASE)
+-#define INT_850_McBSP1RX (12 + IH2_BASE)
+-#define INT_850_McBSP1RX_OF (13 + IH2_BASE)
+-#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+-#define INT_850_UART_MODEM_1 (15 + IH2_BASE)
+-#define INT_850_MCSI (16 + IH2_BASE)
+-#define INT_850_uWireTX (17 + IH2_BASE)
+-#define INT_850_uWireRX (18 + IH2_BASE)
+-#define INT_850_SMC_CD (19 + IH2_BASE)
+-#define INT_850_SMC_IREQ (20 + IH2_BASE)
+-#define INT_850_HDQ_1WIRE (21 + IH2_BASE)
+-#define INT_850_TIMER32K (22 + IH2_BASE)
+-#define INT_850_MMC_SDIO (23 + IH2_BASE)
+-#define INT_850_UPLD (24 + IH2_BASE)
+-#define INT_850_USB_HHC_1 (27 + IH2_BASE)
+-#define INT_850_USB_HHC_2 (28 + IH2_BASE)
+-#define INT_850_USB_GENI (29 + IH2_BASE)
+-#define INT_850_USB_OTG (30 + IH2_BASE)
+-#define INT_850_CAMERA_IF (31 + IH2_BASE)
+-#define INT_850_RNG (32 + IH2_BASE)
+-#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
+-#define INT_850_DBB_RF_EN (34 + IH2_BASE)
+-#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE)
+-#define INT_850_SHA1_MD5 (36 + IH2_BASE)
+-#define INT_850_SPI_100K_2 (37 + IH2_BASE)
+-#define INT_850_RNG_IDLE (38 + IH2_BASE)
+-#define INT_850_MPUIO (39 + IH2_BASE)
+-#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+-#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
+-#define INT_850_LLPC_OE_RISING (42 + IH2_BASE)
+-#define INT_850_LLPC_VSYNC (43 + IH2_BASE)
+-#define INT_850_WAKE_UP_REQ (46 + IH2_BASE)
+-#define INT_850_DMA_CH6 (53 + IH2_BASE)
+-#define INT_850_DMA_CH7 (54 + IH2_BASE)
+-#define INT_850_DMA_CH8 (55 + IH2_BASE)
+-#define INT_850_DMA_CH9 (56 + IH2_BASE)
+-#define INT_850_DMA_CH10 (57 + IH2_BASE)
+-#define INT_850_DMA_CH11 (58 + IH2_BASE)
+-#define INT_850_DMA_CH12 (59 + IH2_BASE)
+-#define INT_850_DMA_CH13 (60 + IH2_BASE)
+-#define INT_850_DMA_CH14 (61 + IH2_BASE)
+-#define INT_850_DMA_CH15 (62 + IH2_BASE)
+-#define INT_850_NAND (63 + IH2_BASE)
++#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
++#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
++#define INT_7XX_CFCD (2 + IH2_BASE)
++#define INT_7XX_CFIREQ (3 + IH2_BASE)
++#define INT_7XX_I2C (4 + IH2_BASE)
++#define INT_7XX_PCC (5 + IH2_BASE)
++#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
++#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
++#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
++#define INT_7XX_VLYNQ (9 + IH2_BASE)
++#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
++#define INT_7XX_McBSP1TX (11 + IH2_BASE)
++#define INT_7XX_McBSP1RX (12 + IH2_BASE)
++#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
++#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
++#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
++#define INT_7XX_MCSI (16 + IH2_BASE)
++#define INT_7XX_uWireTX (17 + IH2_BASE)
++#define INT_7XX_uWireRX (18 + IH2_BASE)
++#define INT_7XX_SMC_CD (19 + IH2_BASE)
++#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
++#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
++#define INT_7XX_TIMER32K (22 + IH2_BASE)
++#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
++#define INT_7XX_UPLD (24 + IH2_BASE)
++#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
++#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
++#define INT_7XX_USB_GENI (29 + IH2_BASE)
++#define INT_7XX_USB_OTG (30 + IH2_BASE)
++#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
++#define INT_7XX_RNG (32 + IH2_BASE)
++#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
++#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
++#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
++#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
++#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
++#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
++#define INT_7XX_MPUIO (39 + IH2_BASE)
++#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
++#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
++#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
++#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
++#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
++#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
++#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
++#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
++#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
++#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
++#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
++#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
++#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
++#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
++#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
++#define INT_7XX_NAND (63 + IH2_BASE)
+
+ #define INT_24XX_SYS_NIRQ 7
+ #define INT_24XX_SDMA_IRQ0 12
+diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
+index e0d6eca..7e9cae3 100644
+--- a/arch/arm/plat-omap/include/mach/mcbsp.h
++++ b/arch/arm/plat-omap/include/mach/mcbsp.h
+@@ -30,8 +30,8 @@
+ #include <mach/hardware.h>
+ #include <mach/clock.h>
+
+-#define OMAP730_MCBSP1_BASE 0xfffb1000
+-#define OMAP730_MCBSP2_BASE 0xfffb1800
++#define OMAP7XX_MCBSP1_BASE 0xfffb1000
++#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+
+ #define OMAP1510_MCBSP1_BASE 0xe1011800
+ #define OMAP1510_MCBSP2_BASE 0xfffb1000
+@@ -58,7 +58,7 @@
+ #define OMAP44XX_MCBSP3_BASE 0x49026000
+ #define OMAP44XX_MCBSP4_BASE 0x48074000
+
+-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
++#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+
+ #define OMAP_MCBSP_REG_DRR2 0x00
+ #define OMAP_MCBSP_REG_DRR1 0x02
+diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
+index 0f49d2d..f3c1d8a 100644
+--- a/arch/arm/plat-omap/include/mach/mux.h
++++ b/arch/arm/plat-omap/include/mach/mux.h
+@@ -51,23 +51,13 @@
+ .pu_pd_reg = PU_PD_SEL_##reg, \
+ .pu_pd_val = status,
+
+-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
+- .mux_reg = OMAP730_IO_CONF_##reg, \
++#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
++ .mux_reg = OMAP7XX_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+-#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \
+- .pull_reg = OMAP730_IO_CONF_##reg, \
+- .pull_bit = bit, \
+- .pull_val = status,
+-
+-#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
+- .mux_reg = OMAP850_IO_CONF_##reg, \
+- .mask_offset = mode_offset, \
+- .mask = mode,
+-
+-#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \
+- .pull_reg = OMAP850_IO_CONF_##reg, \
++#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \
++ .pull_reg = OMAP7XX_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+@@ -84,21 +74,12 @@
+ #define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
+ .pu_pd_val = status,
+
+-#define MUX_REG_730(reg, mode_offset, mode) \
+- .mux_reg = OMAP730_IO_CONF_##reg, \
++#define MUX_REG_7XX(reg, mode_offset, mode) \
++ .mux_reg = OMAP7XX_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+-#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \
+- .pull_bit = bit, \
+- .pull_val = status,
+-
+-#define MUX_REG_850(reg, mode_offset, mode) \
+- .mux_reg = OMAP850_IO_CONF_##reg, \
+- .mask_offset = mode_offset, \
+- .mask = mode,
+-
+-#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \
++#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+@@ -118,32 +99,21 @@
+
+ /*
+ * OMAP730/850 has a slightly different config for the pin mux.
+- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
++ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
+ * not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ * as mux config
+ */
+-#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \
++#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \
+ pull_bit, pull_status, debug_status)\
+ { \
+ .name = desc, \
+ .debug = debug_status, \
+- MUX_REG_730(mux_reg, mode_offset, mode) \
+- PULL_REG_730(mux_reg, pull_bit, pull_status) \
++ MUX_REG_7XX(mux_reg, mode_offset, mode) \
++ PULL_REG_7XX(mux_reg, pull_bit, pull_status) \
+ PU_PD_REG(NA, 0) \
+ },
+
+-#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \
+- pull_bit, pull_status, debug_status)\
+-{ \
+- .name = desc, \
+- .debug = debug_status, \
+- MUX_REG_850(mux_reg, mode_offset, mode) \
+- PULL_REG_850(mux_reg, pull_bit, pull_status) \
+- PU_PD_REG(NA, 0) \
+-},
+-
+-
+ #define MUX_CFG_24XX(desc, reg_offset, mode, \
+ pull_en, pull_mode, dbg) \
+ { \
+@@ -232,45 +202,25 @@ struct pin_config {
+
+ };
+
+-enum omap730_index {
++enum omap7xx_index {
+ /* OMAP 730 keyboard */
+- E2_730_KBR0,
+- J7_730_KBR1,
+- E1_730_KBR2,
+- F3_730_KBR3,
+- D2_730_KBR4,
+- C2_730_KBC0,
+- D3_730_KBC1,
+- E4_730_KBC2,
+- F4_730_KBC3,
+- E3_730_KBC4,
+-
+- /* USB */
+- AA17_730_USB_DM,
+- W16_730_USB_PU_EN,
+- W17_730_USB_VBUSI,
+-};
+-
+-enum omap850_index {
+- /* OMAP 850 keyboard */
+- E2_850_KBR0,
+- J7_850_KBR1,
+- E1_850_KBR2,
+- F3_850_KBR3,
+- D2_850_KBR4,
+- C2_850_KBC0,
+- D3_850_KBC1,
+- E4_850_KBC2,
+- F4_850_KBC3,
+- E3_850_KBC4,
++ E2_7XX_KBR0,
++ J7_7XX_KBR1,
++ E1_7XX_KBR2,
++ F3_7XX_KBR3,
++ D2_7XX_KBR4,
++ C2_7XX_KBC0,
++ D3_7XX_KBC1,
++ E4_7XX_KBC2,
++ F4_7XX_KBC3,
++ E3_7XX_KBC4,
+
+ /* USB */
+- AA17_850_USB_DM,
+- W16_850_USB_PU_EN,
+- W17_850_USB_VBUSI,
++ AA17_7XX_USB_DM,
++ W16_7XX_USB_PU_EN,
++ W17_7XX_USB_VBUSI,
+ };
+
+-
+ enum omap1xxx_index {
+ /* UART1 (BT_UART_GATING)*/
+ UART1_TX = 0,
+diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
+index f8d186a..4655707 100644
+--- a/arch/arm/plat-omap/include/mach/omap34xx.h
++++ b/arch/arm/plat-omap/include/mach/omap34xx.h
+@@ -74,8 +74,12 @@
+
+ #define OMAP34XX_IVA_INTC_BASE 0x40000000
+ #define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
+-#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000)
+ #define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
++#define OMAP34XX_UHH_CONFIG_BASE (L4_34XX_BASE + 0x64000)
++#define OMAP34XX_OHCI_BASE (L4_34XX_BASE + 0x64400)
++#define OMAP34XX_EHCI_BASE (L4_34XX_BASE + 0x64800)
++#define OMAP34XX_SR1_BASE 0x480C9000
++#define OMAP34XX_SR2_BASE 0x480CB000
+
+ #define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
+
+diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
+index b3ba5ac..3361897 100644
+--- a/arch/arm/plat-omap/include/mach/omap44xx.h
++++ b/arch/arm/plat-omap/include/mach/omap44xx.h
+@@ -22,6 +22,9 @@
+ #define L4_PER_44XX_BASE 0x48000000
+ #define L4_EMU_44XX_BASE 0x54000000
+ #define L3_44XX_BASE 0x44000000
++#define OMAP44XX_EMIF1_BASE 0x4c000000
++#define OMAP44XX_EMIF2_BASE 0x4d000000
++#define OMAP44XX_DMM_BASE 0x4e000000
+ #define OMAP4430_32KSYNCT_BASE 0x4a304000
+ #define OMAP4430_CM_BASE 0x4a004000
+ #define OMAP4430_PRM_BASE 0x48306000
+@@ -33,14 +36,9 @@
+ #define IRQ_SIR_IRQ 0x0040
+ #define OMAP44XX_GIC_DIST_BASE 0x48241000
+ #define OMAP44XX_GIC_CPU_BASE 0x48240100
+-#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+ #define OMAP44XX_SCU_BASE 0x48240000
+-#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
+ #define OMAP44XX_LOCAL_TWD_BASE 0x48240600
+-#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+-#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
+ #define OMAP44XX_WKUPGEN_BASE 0x48281000
+-#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+ #endif /* __ASM_ARCH_OMAP44XX_H */
+
+diff --git a/arch/arm/plat-omap/include/mach/omap7xx.h b/arch/arm/plat-omap/include/mach/omap7xx.h
+new file mode 100644
+index 0000000..53f5241
+--- /dev/null
++++ b/arch/arm/plat-omap/include/mach/omap7xx.h
+@@ -0,0 +1,104 @@
++/* arch/arm/plat-omap/include/mach/omap7xx.h
++ *
++ * Hardware definitions for TI OMAP7XX processor.
++ *
++ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
++ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
++ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#ifndef __ASM_ARCH_OMAP7XX_H
++#define __ASM_ARCH_OMAP7XX_H
++
++/*
++ * ----------------------------------------------------------------------------
++ * Base addresses
++ * ----------------------------------------------------------------------------
++ */
++
++/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
++
++#define OMAP7XX_DSP_BASE 0xE0000000
++#define OMAP7XX_DSP_SIZE 0x50000
++#define OMAP7XX_DSP_START 0xE0000000
++
++#define OMAP7XX_DSPREG_BASE 0xE1000000
++#define OMAP7XX_DSPREG_SIZE SZ_128K
++#define OMAP7XX_DSPREG_START 0xE1000000
++
++/*
++ * ----------------------------------------------------------------------------
++ * OMAP7XX specific configuration registers
++ * ----------------------------------------------------------------------------
++ */
++#define OMAP7XX_CONFIG_BASE 0xfffe1000
++#define OMAP7XX_IO_CONF_0 0xfffe1070
++#define OMAP7XX_IO_CONF_1 0xfffe1074
++#define OMAP7XX_IO_CONF_2 0xfffe1078
++#define OMAP7XX_IO_CONF_3 0xfffe107c
++#define OMAP7XX_IO_CONF_4 0xfffe1080
++#define OMAP7XX_IO_CONF_5 0xfffe1084
++#define OMAP7XX_IO_CONF_6 0xfffe1088
++#define OMAP7XX_IO_CONF_7 0xfffe108c
++#define OMAP7XX_IO_CONF_8 0xfffe1090
++#define OMAP7XX_IO_CONF_9 0xfffe1094
++#define OMAP7XX_IO_CONF_10 0xfffe1098
++#define OMAP7XX_IO_CONF_11 0xfffe109c
++#define OMAP7XX_IO_CONF_12 0xfffe10a0
++#define OMAP7XX_IO_CONF_13 0xfffe10a4
++
++#define OMAP7XX_MODE_1 0xfffe1010
++#define OMAP7XX_MODE_2 0xfffe1014
++
++/* CSMI specials: in terms of base + offset */
++#define OMAP7XX_MODE2_OFFSET 0x14
++
++/*
++ * ----------------------------------------------------------------------------
++ * OMAP7XX traffic controller configuration registers
++ * ----------------------------------------------------------------------------
++ */
++#define OMAP7XX_FLASH_CFG_0 0xfffecc10
++#define OMAP7XX_FLASH_ACFG_0 0xfffecc50
++#define OMAP7XX_FLASH_CFG_1 0xfffecc14
++#define OMAP7XX_FLASH_ACFG_1 0xfffecc54
++
++/*
++ * ----------------------------------------------------------------------------
++ * OMAP7XX DSP control registers
++ * ----------------------------------------------------------------------------
++ */
++#define OMAP7XX_ICR_BASE 0xfffbb800
++#define OMAP7XX_DSP_M_CTL 0xfffbb804
++#define OMAP7XX_DSP_MMU_BASE 0xfffed200
++
++/*
++ * ----------------------------------------------------------------------------
++ * OMAP7XX PCC_UPLD configuration registers
++ * ----------------------------------------------------------------------------
++ */
++#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900)
++#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
++
++#endif /* __ASM_ARCH_OMAP7XX_H */
++
+diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
+index 1c09c78..7b58a5f 100644
+--- a/arch/arm/plat-omap/include/mach/sdrc.h
++++ b/arch/arm/plat-omap/include/mach/sdrc.h
+@@ -80,11 +80,11 @@
+ */
+
+ #define OMAP242X_SMS_REGADDR(reg) \
+- (void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
++ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+ #define OMAP243X_SMS_REGADDR(reg) \
+- (void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
++ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+ #define OMAP343X_SMS_REGADDR(reg) \
+- (void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
++ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+ /* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
+index e249186..9951345 100644
+--- a/arch/arm/plat-omap/include/mach/serial.h
++++ b/arch/arm/plat-omap/include/mach/serial.h
+@@ -20,26 +20,22 @@
+ #define OMAP_UART1_BASE 0xfffb0000
+ #define OMAP_UART2_BASE 0xfffb0800
+ #define OMAP_UART3_BASE 0xfffb9800
+-#define OMAP_MAX_NR_PORTS 3
+ #elif defined(CONFIG_ARCH_OMAP2)
+ /* OMAP2 serial ports */
+ #define OMAP_UART1_BASE 0x4806a000
+ #define OMAP_UART2_BASE 0x4806c000
+ #define OMAP_UART3_BASE 0x4806e000
+-#define OMAP_MAX_NR_PORTS 3
+ #elif defined(CONFIG_ARCH_OMAP3)
+ /* OMAP3 serial ports */
+ #define OMAP_UART1_BASE 0x4806a000
+ #define OMAP_UART2_BASE 0x4806c000
+ #define OMAP_UART3_BASE 0x49020000
+-#define OMAP_MAX_NR_PORTS 3
+ #elif defined(CONFIG_ARCH_OMAP4)
+ /* OMAP4 serial ports */
+ #define OMAP_UART1_BASE 0x4806a000
+ #define OMAP_UART2_BASE 0x4806c000
+ #define OMAP_UART3_BASE 0x48020000
+ #define OMAP_UART4_BASE 0x4806e000
+-#define OMAP_MAX_NR_PORTS 4
+ #endif
+
+ #define OMAP1510_BASE_BAUD (12000000/16)
+diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
+index 0814c5f..ddf7b88 100644
+--- a/arch/arm/plat-omap/include/mach/uncompress.h
++++ b/arch/arm/plat-omap/include/mach/uncompress.h
+@@ -25,6 +25,7 @@ unsigned int system_rev;
+
+ #define UART_OMAP_MDR1 0x08 /* mode definition register */
+ #define OMAP_ID_730 0x355F
++#define OMAP_ID_850 0x362C
+ #define ID_MASK 0x7fff
+ #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
+ #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+@@ -53,7 +54,7 @@ static void putc(int c)
+ /* MMU is not on, so cpu_is_omapXXXX() won't work here */
+ unsigned int omap_id = omap_get_id();
+
+- if (omap_id == OMAP_ID_730)
++ if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850)
+ shift = 0;
+
+ if (check_port(uart, shift))
+diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
+index f337e17..a4068a4 100644
+--- a/arch/arm/plat-omap/include/mach/usb.h
++++ b/arch/arm/plat-omap/include/mach/usb.h
+@@ -5,6 +5,21 @@
+
+ #include <mach/board.h>
+
++#define OMAP3_HS_USB_PORTS 3
++enum ehci_hcd_omap_mode {
++ EHCI_HCD_OMAP_MODE_UNKNOWN,
++ EHCI_HCD_OMAP_MODE_PHY,
++ EHCI_HCD_OMAP_MODE_TLL,
++};
++
++struct ehci_hcd_omap_platform_data {
++ enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS];
++ unsigned phy_reset:1;
++
++ /* have to be valid if phy_reset is true and portx is in phy mode */
++ int reset_gpio_port[OMAP3_HS_USB_PORTS];
++};
++
+ /*-------------------------------------------------------------------------*/
+
+ #define OMAP1_OTG_BASE 0xfffb0400
+@@ -29,6 +44,8 @@
+
+ extern void usb_musb_init(void);
+
++extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
++
+ #endif
+
+ void omap_usb_init(struct omap_usb_config *pdata);
+diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
+index b97dfaf..9eebf62 100644
+--- a/arch/arm/plat-omap/include/mach/vmalloc.h
++++ b/arch/arm/plat-omap/include/mach/vmalloc.h
+@@ -17,5 +17,5 @@
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+-#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
++#define VMALLOC_END (PAGE_OFFSET + 0x38000000)
+
+diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
+index b6defa2..93c1d53 100644
+--- a/arch/arm/plat-omap/io.c
++++ b/arch/arm/plat-omap/io.c
+@@ -13,7 +13,7 @@
+ #include <linux/io.h>
+ #include <linux/mm.h>
+
+-#include <mach/omap730.h>
++#include <mach/omap7xx.h>
+ #include <mach/omap1510.h>
+ #include <mach/omap16xx.h>
+ #include <mach/omap24xx.h>
+@@ -33,13 +33,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
+ if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
+ return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
+ }
+- if (cpu_is_omap730()) {
+- if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
+- return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START);
++ if (cpu_is_omap7xx()) {
++ if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
++ return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
+
+- if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE))
+- return XLATE(p, OMAP730_DSPREG_BASE,
+- OMAP730_DSPREG_START);
++ if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
++ return XLATE(p, OMAP7XX_DSPREG_BASE,
++ OMAP7XX_DSPREG_START);
+ }
+ if (cpu_is_omap15xx()) {
+ if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
+@@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
+ return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+ if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+ return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
++ if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
++ return XLATE(p, OMAP44XX_EMIF1_PHYS, \
++ OMAP44XX_EMIF1_VIRT);
++ if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE))
++ return XLATE(p, OMAP44XX_EMIF2_PHYS, \
++ OMAP44XX_EMIF2_VIRT);
++ if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE))
++ return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT);
+ if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+ return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+ if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+@@ -142,7 +150,7 @@ u8 omap_readb(u32 pa)
+ if (cpu_class_is_omap1())
+ return __raw_readb(OMAP1_IO_ADDRESS(pa));
+ else
+- return __raw_readb(OMAP2_IO_ADDRESS(pa));
++ return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
+ }
+ EXPORT_SYMBOL(omap_readb);
+
+@@ -151,7 +159,7 @@ u16 omap_readw(u32 pa)
+ if (cpu_class_is_omap1())
+ return __raw_readw(OMAP1_IO_ADDRESS(pa));
+ else
+- return __raw_readw(OMAP2_IO_ADDRESS(pa));
++ return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
+ }
+ EXPORT_SYMBOL(omap_readw);
+
+@@ -160,7 +168,7 @@ u32 omap_readl(u32 pa)
+ if (cpu_class_is_omap1())
+ return __raw_readl(OMAP1_IO_ADDRESS(pa));
+ else
+- return __raw_readl(OMAP2_IO_ADDRESS(pa));
++ return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
+ }
+ EXPORT_SYMBOL(omap_readl);
+
+@@ -169,7 +177,7 @@ void omap_writeb(u8 v, u32 pa)
+ if (cpu_class_is_omap1())
+ __raw_writeb(v, OMAP1_IO_ADDRESS(pa));
+ else
+- __raw_writeb(v, OMAP2_IO_ADDRESS(pa));
++ __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
+ }
+ EXPORT_SYMBOL(omap_writeb);
+
+@@ -178,7 +186,7 @@ void omap_writew(u16 v, u32 pa)
+ if (cpu_class_is_omap1())
+ __raw_writew(v, OMAP1_IO_ADDRESS(pa));
+ else
+- __raw_writew(v, OMAP2_IO_ADDRESS(pa));
++ __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
+ }
+ EXPORT_SYMBOL(omap_writew);
+
+@@ -187,6 +195,6 @@ void omap_writel(u32 v, u32 pa)
+ if (cpu_class_is_omap1())
+ __raw_writel(v, OMAP1_IO_ADDRESS(pa));
+ else
+- __raw_writel(v, OMAP2_IO_ADDRESS(pa));
++ __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
+ }
+ EXPORT_SYMBOL(omap_writel);
+diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
+index 2c409fc..12513f4 100644
+--- a/arch/arm/plat-omap/omap_device.c
++++ b/arch/arm/plat-omap/omap_device.c
+@@ -103,21 +103,6 @@
+ /* Private functions */
+
+ /**
+- * _read_32ksynct - read the OMAP 32K sync timer
+- *
+- * Returns the current value of the 32KiHz synchronization counter.
+- * XXX this should be generalized to simply read the system clocksource.
+- * XXX this should be moved to a separate synctimer32k.c file
+- */
+-static u32 _read_32ksynct(void)
+-{
+- if (!cpu_class_is_omap2())
+- BUG();
+-
+- return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
+-}
+-
+-/**
+ * _omap_device_activate - increase device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: increase to latency target (0) or full readiness (1)?
+@@ -133,13 +118,13 @@ static u32 _read_32ksynct(void)
+ */
+ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
+ {
+- u32 a, b;
++ struct timespec a, b, c;
+
+ pr_debug("omap_device: %s: activating\n", od->pdev.name);
+
+ while (od->pm_lat_level > 0) {
+ struct omap_device_pm_latency *odpl;
+- int act_lat = 0;
++ unsigned long long act_lat = 0;
+
+ od->pm_lat_level--;
+
+@@ -149,20 +134,22 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
+ (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
+ break;
+
+- a = _read_32ksynct();
++ getnstimeofday(&a);
+
+ /* XXX check return code */
+ odpl->activate_func(od);
+
+- b = _read_32ksynct();
++ getnstimeofday(&b);
+
+- act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
++ c = timespec_sub(b, a);
++ act_lat = timespec_to_ns(&c) * NSEC_PER_USEC;
+
+ pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
+- "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
++ "%llu usec\n", od->pdev.name, od->pm_lat_level,
++ act_lat);
+
+ WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
+- "activate step %d took longer than expected (%d > %d)\n",
++ "activate step %d took longer than expected (%llu > %d)\n",
+ od->pdev.name, od->pdev.id, od->pm_lat_level,
+ act_lat, odpl->activate_lat);
+
+@@ -188,13 +175,13 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
+ */
+ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
+ {
+- u32 a, b;
++ struct timespec a, b, c;
+
+ pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+
+ while (od->pm_lat_level < od->pm_lats_cnt) {
+ struct omap_device_pm_latency *odpl;
+- int deact_lat = 0;
++ unsigned long long deact_lat = 0;
+
+ odpl = od->pm_lats + od->pm_lat_level;
+
+@@ -203,23 +190,24 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
+ od->_dev_wakeup_lat_limit))
+ break;
+
+- a = _read_32ksynct();
++ getnstimeofday(&a);
+
+ /* XXX check return code */
+ odpl->deactivate_func(od);
+
+- b = _read_32ksynct();
++ getnstimeofday(&b);
+
+- deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
++ c = timespec_sub(b, a);
++ deact_lat = timespec_to_ns(&c) * NSEC_PER_USEC;
+
+ pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
+- "%d usec\n", od->pdev.name, od->pm_lat_level,
++ "%llu usec\n", od->pdev.name, od->pm_lat_level,
+ deact_lat);
+
+ WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
+- "deactivate step %d took longer than expected (%d > %d)\n",
+- od->pdev.name, od->pdev.id, od->pm_lat_level,
+- deact_lat, odpl->deactivate_lat);
++ "deactivate step %d took longer than expected "
++ "(%llu > %d)\n", od->pdev.name, od->pdev.id,
++ od->pm_lat_level, deact_lat, odpl->deactivate_lat);
+
+ od->dev_wakeup_lat += odpl->activate_lat;
+
+diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
+index 75d1f26..4144f81 100644
+--- a/arch/arm/plat-omap/sram.c
++++ b/arch/arm/plat-omap/sram.c
+@@ -41,14 +41,14 @@
+ #define OMAP1_SRAM_VA VMALLOC_END
+ #define OMAP2_SRAM_PA 0x40200000
+ #define OMAP2_SRAM_PUB_PA 0x4020f800
+-#define OMAP2_SRAM_VA 0xe3000000
++#define OMAP2_SRAM_VA 0xfe400000
+ #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
+ #define OMAP3_SRAM_PA 0x40200000
+-#define OMAP3_SRAM_VA 0xe3000000
++#define OMAP3_SRAM_VA 0xfe400000
+ #define OMAP3_SRAM_PUB_PA 0x40208000
+ #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
+ #define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
+-#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/
++#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/
+
+ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+ #define SRAM_BOOTLOADER_SZ 0x00
+@@ -56,16 +56,16 @@
+ #define SRAM_BOOTLOADER_SZ 0x80
+ #endif
+
+-#define OMAP24XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68005048)
+-#define OMAP24XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68005050)
+-#define OMAP24XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68005058)
++#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
++#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
++#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
+
+-#define OMAP34XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68012848)
+-#define OMAP34XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68012850)
+-#define OMAP34XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68012858)
+-#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_IO_ADDRESS(0x68012880)
+-#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_IO_ADDRESS(0x6C000048)
+-#define OMAP34XX_VA_CONTROL_STAT OMAP2_IO_ADDRESS(0x480022F0)
++#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
++#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
++#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
++#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
++#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
++#define OMAP34XX_VA_CONTROL_STAT OMAP2_L4_IO_ADDRESS(0x480022F0)
+
+ #define GP_DEVICE 0x300
+
+diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
+index 509f2ed..3c40b85 100644
+--- a/arch/arm/plat-omap/usb.c
++++ b/arch/arm/plat-omap/usb.c
+@@ -614,8 +614,8 @@ omap_otg_init(struct omap_usb_config *config)
+ if (config->otg || config->register_host) {
+ syscon &= ~HST_IDLE_EN;
+ ohci_device.dev.platform_data = config;
+- if (cpu_is_omap730())
+- ohci_resources[1].start = INT_730_USB_HHC_1;
++ if (cpu_is_omap7xx())
++ ohci_resources[1].start = INT_7XX_USB_HHC_1;
+ status = platform_device_register(&ohci_device);
+ if (status)
+ pr_debug("can't register OHCI device, %d\n", status);
+@@ -626,8 +626,8 @@ omap_otg_init(struct omap_usb_config *config)
+ if (config->otg) {
+ syscon &= ~OTG_IDLE_EN;
+ otg_device.dev.platform_data = config;
+- if (cpu_is_omap730())
+- otg_resources[1].start = INT_730_USB_OTG;
++ if (cpu_is_omap7xx())
++ otg_resources[1].start = INT_7XX_USB_OTG;
+ status = platform_device_register(&otg_device);
+ if (status)
+ pr_debug("can't register OTG device, %d\n", status);
+@@ -731,7 +731,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
+
+ void __init omap_usb_init(struct omap_usb_config *pdata)
+ {
+- if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
++ if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx())
+ omap_otg_init(pdata);
+ else if (cpu_is_omap15xx())
+ omap_1510_usb_init(pdata);
+diff --git a/drivers/Makefile b/drivers/Makefile
+index 6ee53c7..086857c 100644
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -72,7 +72,7 @@ obj-$(CONFIG_GAMEPORT) += input/gameport/
+ obj-$(CONFIG_INPUT) += input/
+ obj-$(CONFIG_I2O) += message/
+ obj-$(CONFIG_RTC_LIB) += rtc/
+-obj-y += i2c/ media/
++obj-y += i2c/ media/ cbus/
+ obj-$(CONFIG_PPS) += pps/
+ obj-$(CONFIG_W1) += w1/
+ obj-$(CONFIG_POWER_SUPPLY) += power/
+diff --git a/drivers/cbus/Kconfig b/drivers/cbus/Kconfig
+new file mode 100644
+index 0000000..25f8039
+--- /dev/null
++++ b/drivers/cbus/Kconfig
+@@ -0,0 +1,89 @@
++#
++# CBUS device configuration
++#
++
++menu "CBUS support"
++
++config CBUS
++ depends on ARCH_OMAP
++ bool "CBUS support on OMAP"
++ ---help---
++ CBUS is a proprietary serial protocol by Nokia. It is mainly
++ used for accessing Energy Management auxiliary chips.
++
++ If you want CBUS support, you should say Y here.
++
++config CBUS_TAHVO
++ depends on CBUS
++ bool "Support for Tahvo"
++ ---help---
++ Tahvo is a mixed signal ASIC with some system features
++
++ If you want Tahvo support, you should say Y here.
++
++config CBUS_TAHVO_USER
++ depends on CBUS_TAHVO
++ bool "Support for Tahvo user space functions"
++ ---help---
++ If you want support for Tahvo's user space read/write etc. functions,
++ you should say Y here.
++
++config CBUS_TAHVO_USB
++ depends on CBUS_TAHVO && USB
++ tristate "Support for Tahvo USB transceiver"
++ ---help---
++ If you want Tahvo support for USB transceiver, say Y or M here.
++
++config CBUS_TAHVO_USB_HOST_BY_DEFAULT
++ depends on CBUS_TAHVO_USB && USB_OTG
++ boolean "Device in USB host mode by default"
++ ---help---
++ Say Y here, if you want the device to enter USB host mode
++ by default on bootup.
++
++config CBUS_RETU
++ depends on CBUS
++ bool "Support for Retu"
++ ---help---
++ Retu is a mixed signal ASIC with some system features
++
++ If you want Retu support, you should say Y here.
++
++config CBUS_RETU_USER
++ depends on CBUS_RETU
++ bool "Support for Retu user space functions"
++ ---help---
++ If you want support for Retu's user space read/write etc. functions,
++ you should say Y here.
++
++config CBUS_RETU_POWERBUTTON
++ depends on CBUS_RETU
++ bool "Support for Retu power button"
++ ---help---
++ The power button on Nokia 770 is connected to the Retu ASIC.
++
++ If you want support for the Retu power button, you should say Y here.
++
++config CBUS_RETU_RTC
++ depends on CBUS_RETU && SYSFS
++ tristate "Support for Retu pseudo-RTC"
++ ---help---
++ Say Y here if you want support for the device that alleges to be an
++ RTC in Retu. This will expose a sysfs interface for it.
++
++config CBUS_RETU_WDT
++ depends on CBUS_RETU && SYSFS
++ tristate "Support for Retu watchdog timer"
++ ---help---
++ Say Y here if you want support for the watchdog in Retu. This will
++ expose a sysfs interface to grok it.
++
++config CBUS_RETU_HEADSET
++ depends on CBUS_RETU && SYSFS
++ tristate "Support for headset detection with Retu/Vilma"
++ ---help---
++ Say Y here if you want support detecting a headset that's connected
++ to Retu/Vilma. Detection state and events are exposed through
++ sysfs.
++
++endmenu
+diff --git a/drivers/cbus/Makefile b/drivers/cbus/Makefile
+new file mode 100644
+index 0000000..347c2a4
+--- /dev/null
++++ b/drivers/cbus/Makefile
+@@ -0,0 +1,14 @@
++#
++# Makefile for CBUS.
++#
++
++obj-$(CONFIG_CBUS) += cbus.o
++obj-$(CONFIG_CBUS_TAHVO) += tahvo.o
++obj-$(CONFIG_CBUS_RETU) += retu.o
++obj-$(CONFIG_CBUS_TAHVO_USB) += tahvo-usb.o
++obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += retu-pwrbutton.o
++obj-$(CONFIG_CBUS_RETU_RTC) += retu-rtc.o
++obj-$(CONFIG_CBUS_RETU_WDT) += retu-wdt.o
++obj-$(CONFIG_CBUS_TAHVO_USER) += tahvo-user.o
++obj-$(CONFIG_CBUS_RETU_USER) += retu-user.o
++obj-$(CONFIG_CBUS_RETU_HEADSET) += retu-headset.o
+diff --git a/drivers/cbus/cbus.c b/drivers/cbus/cbus.c
+new file mode 100644
+index 0000000..774acce
+--- /dev/null
++++ b/drivers/cbus/cbus.c
+@@ -0,0 +1,293 @@
++/*
++ * drivers/cbus/cbus.c
++ *
++ * Support functions for CBUS serial protocol
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
++ * David Weinehall <david.weinehall@nokia.com>, and
++ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/gpio.h>
++
++#include <mach/board.h>
++#include <mach/board-nokia.h>
++
++#include <asm/io.h>
++
++#include "cbus.h"
++
++struct cbus_host *cbus_host = NULL;
++
++#ifdef CONFIG_ARCH_OMAP1
++/* We use our own MPUIO functions to get closer to 1MHz bus speed */
++
++static inline void cbus_set_gpio_direction(u32 base, int mpuio, int is_input)
++{
++ u16 w;
++
++ mpuio &= 0x0f;
++ w = __raw_readw(base + OMAP_MPUIO_IO_CNTL);
++ if (is_input)
++ w |= 1 << mpuio;
++ else
++ w &= ~(1 << mpuio);
++ __raw_writew(w, base + OMAP_MPUIO_IO_CNTL);
++
++}
++
++static inline void cbus_set_gpio_dataout(u32 base, int mpuio, int enable)
++{
++ u16 w;
++
++ mpuio &= 0x0f;
++ w = __raw_readw(base + OMAP_MPUIO_OUTPUT);
++ if (enable)
++ w |= 1 << mpuio;
++ else
++ w &= ~(1 << mpuio);
++ __raw_writew(w, base + OMAP_MPUIO_OUTPUT);
++}
++
++static inline int cbus_get_gpio_datain(u32 base, int mpuio)
++{
++ mpuio &= 0x0f;
++
++ return (__raw_readw(base + OMAP_MPUIO_INPUT_LATCH) & (1 << mpuio)) != 0;
++}
++
++static void cbus_send_bit(struct cbus_host *host, u32 base, int bit,
++ int set_to_input)
++{
++ cbus_set_gpio_dataout(base, host->dat_gpio, bit ? 1 : 0);
++ cbus_set_gpio_dataout(base, host->clk_gpio, 1);
++
++ /* The data bit is read on the rising edge of CLK */
++ if (set_to_input)
++ cbus_set_gpio_direction(base, host->dat_gpio, 1);
++
++ cbus_set_gpio_dataout(base, host->clk_gpio, 0);
++}
++
++static u8 cbus_receive_bit(struct cbus_host *host, u32 base)
++{
++ u8 ret;
++
++ cbus_set_gpio_dataout(base, host->clk_gpio, 1);
++ ret = cbus_get_gpio_datain(base, host->dat_gpio);
++ cbus_set_gpio_dataout(base, host->clk_gpio, 0);
++
++ return ret;
++}
++
++#define cbus_output(base, gpio, val) cbus_set_gpio_direction(base, gpio, 0)
++
++#else
++
++#define cbus_output(base, gpio, val) gpio_direction_output(gpio, val)
++#define cbus_set_gpio_dataout(base, gpio, enable) gpio_set_value(gpio, enable)
++#define cbus_get_gpio_datain(base, int, gpio) gpio_get_value(gpio)
++
++static void _cbus_send_bit(struct cbus_host *host, int bit, int set_to_input)
++{
++ gpio_set_value(host->dat_gpio, bit ? 1 : 0);
++ gpio_set_value(host->clk_gpio, 1);
++
++ /* The data bit is read on the rising edge of CLK */
++ if (set_to_input)
++ gpio_direction_input(host->dat_gpio);
++
++ gpio_set_value(host->clk_gpio, 0);
++}
++
++static u8 _cbus_receive_bit(struct cbus_host *host)
++{
++ u8 ret;
++
++ gpio_set_value(host->clk_gpio, 1);
++ ret = gpio_get_value(host->dat_gpio);
++ gpio_set_value(host->clk_gpio, 0);
++
++ return ret;
++}
++
++#define cbus_send_bit(host, base, bit, set_to_input) _cbus_send_bit(host, bit, set_to_input)
++#define cbus_receive_bit(host, base) _cbus_receive_bit(host)
++
++#endif
++
++static int cbus_transfer(struct cbus_host *host, int dev, int reg, int data)
++{
++ int i;
++ int is_read = 0;
++ unsigned long flags;
++ u32 base;
++
++#ifdef CONFIG_ARCH_OMAP1
++ base = OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE);
++#else
++ base = 0;
++#endif
++
++ if (data < 0)
++ is_read = 1;
++
++ /* We don't want interrupts disturbing our transfer */
++ spin_lock_irqsave(&host->lock, flags);
++
++ /* Reset state and start of transfer, SEL stays down during transfer */
++ cbus_set_gpio_dataout(base, host->sel_gpio, 0);
++
++ /* Set the DAT pin to output */
++ cbus_output(base, host->dat_gpio, 1);
++
++ /* Send the device address */
++ for (i = 3; i > 0; i--)
++ cbus_send_bit(host, base, dev & (1 << (i - 1)), 0);
++
++ /* Send the rw flag */
++ cbus_send_bit(host, base, is_read, 0);
++
++ /* Send the register address */
++ for (i = 5; i > 0; i--) {
++ int set_to_input = 0;
++
++ if (is_read && i == 1)
++ set_to_input = 1;
++
++ cbus_send_bit(host, base, reg & (1 << (i - 1)), set_to_input);
++ }
++
++ if (!is_read) {
++ for (i = 16; i > 0; i--)
++ cbus_send_bit(host, base, data & (1 << (i - 1)), 0);
++ } else {
++ cbus_set_gpio_dataout(base, host->clk_gpio, 1);
++ data = 0;
++
++ for (i = 16; i > 0; i--) {
++ u8 bit = cbus_receive_bit(host, base);
++
++ if (bit)
++ data |= 1 << (i - 1);
++ }
++ }
++
++ /* Indicate end of transfer, SEL goes up until next transfer */
++ cbus_set_gpio_dataout(base, host->sel_gpio, 1);
++ cbus_set_gpio_dataout(base, host->clk_gpio, 1);
++ cbus_set_gpio_dataout(base, host->clk_gpio, 0);
++
++ spin_unlock_irqrestore(&host->lock, flags);
++
++ return is_read ? data : 0;
++}
++
++/*
++ * Read a given register from the device
++ */
++int cbus_read_reg(struct cbus_host *host, int dev, int reg)
++{
++ return cbus_host ? cbus_transfer(host, dev, reg, -1) : -ENODEV;
++}
++
++/*
++ * Write to a given register of the device
++ */
++int cbus_write_reg(struct cbus_host *host, int dev, int reg, u16 val)
++{
++ return cbus_host ? cbus_transfer(host, dev, reg, (int)val) : -ENODEV;
++}
++
++int __init cbus_bus_init(void)
++{
++ const struct omap_cbus_config * cbus_config;
++ struct cbus_host *chost;
++ int ret;
++
++ chost = kmalloc(sizeof (*chost), GFP_KERNEL);
++ if (chost == NULL)
++ return -ENOMEM;
++
++ memset(chost, 0, sizeof (*chost));
++
++ spin_lock_init(&chost->lock);
++
++ cbus_config = omap_get_config(OMAP_TAG_CBUS, struct omap_cbus_config);
++
++ if (cbus_config == NULL) {
++ printk(KERN_ERR "cbus: Unable to retrieve config data\n");
++ return -ENODATA;
++ }
++
++ chost->clk_gpio = cbus_config->clk_gpio;
++ chost->dat_gpio = cbus_config->dat_gpio;
++ chost->sel_gpio = cbus_config->sel_gpio;
++
++#ifdef CONFIG_ARCH_OMAP1
++ if (!OMAP_GPIO_IS_MPUIO(chost->clk_gpio) ||
++ !OMAP_GPIO_IS_MPUIO(chost->dat_gpio) ||
++ !OMAP_GPIO_IS_MPUIO(chost->sel_gpio)) {
++ printk(KERN_ERR "cbus: Only MPUIO pins supported\n");
++ ret = -ENODEV;
++ goto exit1;
++ }
++#endif
++
++ if ((ret = gpio_request(chost->clk_gpio, "CBUS clk")) < 0)
++ goto exit1;
++
++ if ((ret = gpio_request(chost->dat_gpio, "CBUS data")) < 0)
++ goto exit2;
++
++ if ((ret = gpio_request(chost->sel_gpio, "CBUS sel")) < 0)
++ goto exit3;
++
++ gpio_direction_output(chost->clk_gpio, 0);
++ gpio_direction_input(chost->dat_gpio);
++ gpio_direction_output(chost->sel_gpio, 1);
++
++ gpio_set_value(chost->clk_gpio, 1);
++ gpio_set_value(chost->clk_gpio, 0);
++
++ cbus_host = chost;
++
++ return 0;
++exit3:
++ gpio_free(chost->dat_gpio);
++exit2:
++ gpio_free(chost->clk_gpio);
++exit1:
++ kfree(chost);
++ return ret;
++}
++
++subsys_initcall(cbus_bus_init);
++
++EXPORT_SYMBOL(cbus_host);
++EXPORT_SYMBOL(cbus_read_reg);
++EXPORT_SYMBOL(cbus_write_reg);
++
++MODULE_DESCRIPTION("CBUS serial protocol");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Juha Yrjölä, David Weinehall, and Mikko Ylinen");
+diff --git a/drivers/cbus/cbus.h b/drivers/cbus/cbus.h
+new file mode 100644
+index 0000000..957224c
+--- /dev/null
++++ b/drivers/cbus/cbus.h
+@@ -0,0 +1,36 @@
++/*
++ * drivers/cbus/cbus.h
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
++ * David Weinehall <david.weinehall@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __DRIVERS_CBUS_CBUS_H
++#define __DRIVERS_CBUS_CBUS_H
++
++struct cbus_host {
++ int clk_gpio, dat_gpio, sel_gpio;
++ spinlock_t lock;
++};
++
++extern struct cbus_host *cbus_host;
++
++extern int cbus_read_reg(struct cbus_host *host, int dev, int reg);
++extern int cbus_write_reg(struct cbus_host *host, int dev, int reg, u16 val);
++
++#endif /* __DRIVERS_CBUS_CBUS_H */
+diff --git a/drivers/cbus/retu-headset.c b/drivers/cbus/retu-headset.c
+new file mode 100644
+index 0000000..e798bc2
+--- /dev/null
++++ b/drivers/cbus/retu-headset.c
+@@ -0,0 +1,355 @@
++/**
++ * Retu/Vilma headset detection
++ *
++ * Copyright (C) 2006 Nokia Corporation
++ *
++ * Written by Juha Yrjölä
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/input.h>
++#include <linux/platform_device.h>
++
++#include "retu.h"
++
++#define RETU_ADC_CHANNEL_HOOKDET 0x05
++
++#define RETU_HEADSET_KEY KEY_PHONE
++
++struct retu_headset {
++ spinlock_t lock;
++ struct mutex mutex;
++ struct platform_device *pdev;
++ struct input_dev *idev;
++ unsigned bias_enabled;
++ unsigned detection_enabled;
++ unsigned pressed;
++ struct timer_list enable_timer;
++ struct timer_list detect_timer;
++};
++
++static void retu_headset_set_bias(int enable)
++{
++ if (enable) {
++ retu_set_clear_reg_bits(RETU_REG_AUDTXR,
++ (1 << 0) | (1 << 1), 0);
++ msleep(2);
++ retu_set_clear_reg_bits(RETU_REG_AUDTXR, 1 << 3, 0);
++ } else {
++ retu_set_clear_reg_bits(RETU_REG_AUDTXR, 0,
++ (1 << 0) | (1 << 1) | (1 << 3));
++ }
++}
++
++static void retu_headset_enable(struct retu_headset *hs)
++{
++ mutex_lock(&hs->mutex);
++ if (!hs->bias_enabled) {
++ hs->bias_enabled = 1;
++ retu_headset_set_bias(1);
++ }
++ mutex_unlock(&hs->mutex);
++}
++
++static void retu_headset_disable(struct retu_headset *hs)
++{
++ mutex_lock(&hs->mutex);
++ if (hs->bias_enabled) {
++ hs->bias_enabled = 0;
++ retu_headset_set_bias(0);
++ }
++ mutex_unlock(&hs->mutex);
++}
++
++static void retu_headset_det_enable(struct retu_headset *hs)
++{
++ mutex_lock(&hs->mutex);
++ if (!hs->detection_enabled) {
++ hs->detection_enabled = 1;
++ retu_set_clear_reg_bits(RETU_REG_CC1, (1 << 10) | (1 << 8), 0);
++ retu_enable_irq(RETU_INT_HOOK);
++ }
++ mutex_unlock(&hs->mutex);
++}
++
++static void retu_headset_det_disable(struct retu_headset *hs)
++{
++ unsigned long flags;
++
++ mutex_lock(&hs->mutex);
++ if (hs->detection_enabled) {
++ hs->detection_enabled = 0;
++ retu_disable_irq(RETU_INT_HOOK);
++ del_timer_sync(&hs->enable_timer);
++ del_timer_sync(&hs->detect_timer);
++ spin_lock_irqsave(&hs->lock, flags);
++ if (hs->pressed)
++ input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
++ spin_unlock_irqrestore(&hs->lock, flags);
++ retu_set_clear_reg_bits(RETU_REG_CC1, 0, (1 << 10) | (1 << 8));
++ }
++ mutex_unlock(&hs->mutex);
++}
++
++static ssize_t retu_headset_hookdet_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ int val;
++
++ val = retu_read_adc(RETU_ADC_CHANNEL_HOOKDET);
++ return sprintf(buf, "%d\n", val);
++}
++
++static DEVICE_ATTR(hookdet, S_IRUGO, retu_headset_hookdet_show, NULL);
++
++static ssize_t retu_headset_enable_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct retu_headset *hs = dev_get_drvdata(dev);
++
++ return sprintf(buf, "%u\n", hs->bias_enabled);
++}
++
++static ssize_t retu_headset_enable_store(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct retu_headset *hs = dev_get_drvdata(dev);
++ int enable;
++
++ if (sscanf(buf, "%u", &enable) != 1)
++ return -EINVAL;
++ if (enable)
++ retu_headset_enable(hs);
++ else
++ retu_headset_disable(hs);
++ return count;
++}
++
++static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR | S_IWGRP,
++ retu_headset_enable_show, retu_headset_enable_store);
++
++static ssize_t retu_headset_enable_det_show(struct device *dev,
++ struct device_attribute *attr,
++ char *buf)
++{
++ struct retu_headset *hs = dev_get_drvdata(dev);
++
++ return sprintf(buf, "%u\n", hs->detection_enabled);
++}
++
++static ssize_t retu_headset_enable_det_store(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct retu_headset *hs = dev_get_drvdata(dev);
++ int enable;
++
++ if (sscanf(buf, "%u", &enable) != 1)
++ return -EINVAL;
++ if (enable)
++ retu_headset_det_enable(hs);
++ else
++ retu_headset_det_disable(hs);
++ return count;
++}
++
++static DEVICE_ATTR(enable_det, S_IRUGO | S_IWUSR | S_IWGRP,
++ retu_headset_enable_det_show,
++ retu_headset_enable_det_store);
++
++static void retu_headset_hook_interrupt(unsigned long arg)
++{
++ struct retu_headset *hs = (struct retu_headset *) arg;
++ unsigned long flags;
++
++ retu_ack_irq(RETU_INT_HOOK);
++ spin_lock_irqsave(&hs->lock, flags);
++ if (!hs->pressed) {
++ /* Headset button was just pressed down. */
++ hs->pressed = 1;
++ input_report_key(hs->idev, RETU_HEADSET_KEY, 1);
++ }
++ spin_unlock_irqrestore(&hs->lock, flags);
++ retu_set_clear_reg_bits(RETU_REG_CC1, 0, (1 << 10) | (1 << 8));
++ mod_timer(&hs->enable_timer, jiffies + msecs_to_jiffies(50));
++}
++
++static void retu_headset_enable_timer(unsigned long arg)
++{
++ struct retu_headset *hs = (struct retu_headset *) arg;
++
++ retu_set_clear_reg_bits(RETU_REG_CC1, (1 << 10) | (1 << 8), 0);
++ mod_timer(&hs->detect_timer, jiffies + msecs_to_jiffies(350));
++}
++
++static void retu_headset_detect_timer(unsigned long arg)
++{
++ struct retu_headset *hs = (struct retu_headset *) arg;
++ unsigned long flags;
++
++ spin_lock_irqsave(&hs->lock, flags);
++ if (hs->pressed) {
++ hs->pressed = 0;
++ input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
++ }
++ spin_unlock_irqrestore(&hs->lock, flags);
++}
++
++static int __init retu_headset_probe(struct platform_device *pdev)
++{
++ struct retu_headset *hs;
++ int r;
++
++ hs = kzalloc(sizeof(*hs), GFP_KERNEL);
++ if (hs == NULL)
++ return -ENOMEM;
++
++ hs->pdev = pdev;
++
++ hs->idev = input_allocate_device();
++ if (hs->idev == NULL) {
++ r = -ENOMEM;
++ goto err1;
++ }
++ hs->idev->name = "retu-headset";
++ hs->idev->dev.parent = &pdev->dev;
++ set_bit(EV_KEY, hs->idev->evbit);
++ set_bit(RETU_HEADSET_KEY, hs->idev->keybit);
++ r = input_register_device(hs->idev);
++ if (r < 0)
++ goto err2;
++
++ r = device_create_file(&pdev->dev, &dev_attr_hookdet);
++ if (r < 0)
++ goto err3;
++ r = device_create_file(&pdev->dev, &dev_attr_enable);
++ if (r < 0)
++ goto err4;
++ r = device_create_file(&pdev->dev, &dev_attr_enable_det);
++ if (r < 0)
++ goto err5;
++ platform_set_drvdata(pdev, hs);
++
++ spin_lock_init(&hs->lock);
++ mutex_init(&hs->mutex);
++ setup_timer(&hs->enable_timer, retu_headset_enable_timer,
++ (unsigned long) hs);
++ setup_timer(&hs->detect_timer, retu_headset_detect_timer,
++ (unsigned long) hs);
++
++ r = retu_request_irq(RETU_INT_HOOK, retu_headset_hook_interrupt,
++ (unsigned long) hs, "hookdet");
++ if (r != 0) {
++ dev_err(&pdev->dev, "hookdet IRQ not available\n");
++ goto err6;
++ }
++ retu_disable_irq(RETU_INT_HOOK);
++ return 0;
++err6:
++ device_remove_file(&pdev->dev, &dev_attr_enable_det);
++err5:
++ device_remove_file(&pdev->dev, &dev_attr_enable);
++err4:
++ device_remove_file(&pdev->dev, &dev_attr_hookdet);
++err3:
++ input_unregister_device(hs->idev);
++err2:
++ input_free_device(hs->idev);
++err1:
++ kfree(hs);
++ return r;
++}
++
++static int retu_headset_remove(struct platform_device *pdev)
++{
++ struct retu_headset *hs = platform_get_drvdata(pdev);
++
++ device_remove_file(&pdev->dev, &dev_attr_hookdet);
++ device_remove_file(&pdev->dev, &dev_attr_enable);
++ device_remove_file(&pdev->dev, &dev_attr_enable_det);
++ retu_headset_disable(hs);
++ retu_headset_det_disable(hs);
++ retu_free_irq(RETU_INT_HOOK);
++ input_unregister_device(hs->idev);
++ input_free_device(hs->idev);
++ return 0;
++}
++
++static int retu_headset_suspend(struct platform_device *pdev,
++ pm_message_t mesg)
++{
++ struct retu_headset *hs = platform_get_drvdata(pdev);
++
++ mutex_lock(&hs->mutex);
++ if (hs->bias_enabled)
++ retu_headset_set_bias(0);
++ mutex_unlock(&hs->mutex);
++
++ return 0;
++}
++
++static int retu_headset_resume(struct platform_device *pdev)
++{
++ struct retu_headset *hs = platform_get_drvdata(pdev);
++
++ mutex_lock(&hs->mutex);
++ if (hs->bias_enabled)
++ retu_headset_set_bias(1);
++ mutex_unlock(&hs->mutex);
++
++ return 0;
++}
++
++static struct platform_driver retu_headset_driver = {
++ .probe = retu_headset_probe,
++ .remove = retu_headset_remove,
++ .suspend = retu_headset_suspend,
++ .resume = retu_headset_resume,
++ .driver = {
++ .name = "retu-headset",
++ },
++};
++
++static int __init retu_headset_init(void)
++{
++ int r;
++
++ printk(KERN_INFO "Retu/Vilma headset driver initializing\n");
++
++ r = platform_driver_register(&retu_headset_driver);
++ if (r < 0)
++ return r;
++
++ return 0;
++}
++
++static void __exit retu_headset_exit(void)
++{
++ platform_driver_unregister(&retu_headset_driver);
++}
++
++module_init(retu_headset_init);
++module_exit(retu_headset_exit);
++
++MODULE_DESCRIPTION("Retu/Vilma headset detection");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Juha Yrjölä");
+diff --git a/drivers/cbus/retu-pwrbutton.c b/drivers/cbus/retu-pwrbutton.c
+new file mode 100644
+index 0000000..38d7aa4
+--- /dev/null
++++ b/drivers/cbus/retu-pwrbutton.c
+@@ -0,0 +1,118 @@
++/**
++ * drivers/cbus/retu-pwrbutton.c
++ *
++ * Driver for sending retu power button event to input-layer
++ *
++ * Copyright (C) 2004 Nokia Corporation
++ *
++ * Written by Ari Saastamoinen <ari.saastamoinen@elektrobit.com>
++ *
++ * Contact Juha Yrjölä <juha.yrjola@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/input.h>
++#include <linux/timer.h>
++#include <linux/jiffies.h>
++#include <linux/bitops.h>
++
++#include "retu.h"
++
++#define RETU_STATUS_PWRONX (1 << 5)
++
++#define PWRBTN_DELAY 20
++#define PWRBTN_UP 0
++#define PWRBTN_PRESSED 1
++
++static int pwrbtn_state;
++static struct input_dev *pwrbtn_dev;
++static struct timer_list pwrbtn_timer;
++
++static void retubutton_timer_func(unsigned long arg)
++{
++ int state;
++
++ if (retu_read_reg(RETU_REG_STATUS) & RETU_STATUS_PWRONX)
++ state = PWRBTN_UP;
++ else
++ state = PWRBTN_PRESSED;
++
++ if (pwrbtn_state != state) {
++ input_report_key(pwrbtn_dev, KEY_POWER, state);
++ pwrbtn_state = state;
++ }
++}
++
++/**
++ * Interrupt function is called whenever power button key is pressed
++ * or released.
++ */
++static void retubutton_irq(unsigned long arg)
++{
++ retu_ack_irq(RETU_INT_PWR);
++ mod_timer(&pwrbtn_timer, jiffies + msecs_to_jiffies(PWRBTN_DELAY));
++}
++
++/**
++ * Init function.
++ * Allocates interrupt for power button and registers itself to input layer.
++ */
++static int __init retubutton_init(void)
++{
++ int irq;
++
++ printk(KERN_INFO "Retu power button driver initialized\n");
++ irq = RETU_INT_PWR;
++
++ init_timer(&pwrbtn_timer);
++ pwrbtn_timer.function = retubutton_timer_func;
++
++ if (retu_request_irq(irq, &retubutton_irq, 0, "PwrOnX") < 0) {
++ printk(KERN_ERR "%s@%s: Cannot allocate irq\n",
++ __FUNCTION__, __FILE__);
++ return -EBUSY;
++ }
++
++ pwrbtn_dev = input_allocate_device();
++ if (!pwrbtn_dev)
++ return -ENOMEM;
++
++ pwrbtn_dev->evbit[0] = BIT_MASK(EV_KEY);
++ pwrbtn_dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
++ pwrbtn_dev->name = "retu-pwrbutton";
++
++ return input_register_device(pwrbtn_dev);
++}
++
++/**
++ * Cleanup function which is called when driver is unloaded
++ */
++static void __exit retubutton_exit(void)
++{
++ retu_free_irq(RETU_INT_PWR);
++ del_timer_sync(&pwrbtn_timer);
++ input_unregister_device(pwrbtn_dev);
++}
++
++module_init(retubutton_init);
++module_exit(retubutton_exit);
++
++MODULE_DESCRIPTION("Retu Power Button");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Ari Saastamoinen");
+diff --git a/drivers/cbus/retu-rtc.c b/drivers/cbus/retu-rtc.c
+new file mode 100644
+index 0000000..1ebc33b
+--- /dev/null
++++ b/drivers/cbus/retu-rtc.c
+@@ -0,0 +1,477 @@
++/**
++ * drivers/cbus/retu-rtc.c
++ *
++ * Support for Retu RTC
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Paul Mundt <paul.mundt@nokia.com> and
++ * Igor Stoppa <igor.stoppa@nokia.com>
++ *
++ * The Retu RTC is essentially a partial read-only RTC that gives us Retu's
++ * idea of what time actually is. It's left as a userspace excercise to map
++ * this back to time in the real world and ensure that calibration settings
++ * are sane to compensate for any horrible drift (on account of not being able
++ * to set the clock to anything).
++ *
++ * Days are semi-writeable. Namely, Retu will only track 255 days for us
++ * consecutively, after which the counter is explicitly stuck at 255 until
++ * someone comes along and clears it with a write. In the event that no one
++ * comes along and clears it, we no longer have any idea what day it is.
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/completion.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/workqueue.h>
++
++#include "cbus.h"
++#include "retu.h"
++
++static struct mutex retu_rtc_mutex;
++static u16 retu_rtc_alarm_expired;
++static u16 retu_rtc_reset_occurred;
++
++static DECLARE_COMPLETION(retu_rtc_exited);
++static DECLARE_COMPLETION(retu_rtc_sync);
++
++static void retu_rtc_barrier(void);
++
++static void retu_rtc_device_release(struct device *dev)
++{
++ complete(&retu_rtc_exited);
++}
++
++static ssize_t retu_rtc_time_show(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ u16 dsr, hmr, dsr2;
++
++ mutex_lock(&retu_rtc_mutex);
++
++ do {
++ u16 dummy;
++
++ /*
++ * Not being in_interrupt() for a retu rtc IRQ, we need to
++ * read twice for consistency..
++ */
++ dummy = retu_read_reg(RETU_REG_RTCDSR);
++ dsr = retu_read_reg(RETU_REG_RTCDSR);
++
++ dummy = retu_read_reg(RETU_REG_RTCHMR);
++ hmr = retu_read_reg(RETU_REG_RTCHMR);
++
++ dummy = retu_read_reg(RETU_REG_RTCDSR);
++ dsr2 = retu_read_reg(RETU_REG_RTCDSR);
++ } while ((dsr != dsr2));
++
++ mutex_unlock(&retu_rtc_mutex);
++
++ /*
++ * Format a 32-bit date-string for userspace
++ *
++ * days | hours | minutes | seconds
++ *
++ * 8 bits for each.
++ *
++ * This mostly sucks because days and seconds are tracked in RTCDSR
++ * while hours and minutes are tracked in RTCHMR. And yes, there
++ * really are no words that can describe an 8 bit day register (or
++ * rather, none that will be reprinted here).
++ */
++ return sprintf(buf, "0x%08x\n", (((dsr >> 8) & 0xff) << 24) |
++ (((hmr >> 8) & 0x1f) << 16) |
++ ((hmr & 0x3f) << 8) | (dsr & 0x3f));
++}
++
++static ssize_t retu_rtc_time_store(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ mutex_lock(&retu_rtc_mutex);
++ /*
++ * Writing anything to the day counter forces it to 0
++ * The seconds counter would be cleared by resetting the minutes counter,
++ * however this won't happen, since we are using the hh:mm counters as
++ * a set of free running counters and the day counter as a multiple
++ * overflow holder.
++ */
++
++ /* Reset day counter, but keep Temperature Shutdown state */
++ retu_write_reg(RETU_REG_RTCDSR,
++ retu_read_reg(RETU_REG_RTCDSR) & (1 << 6));
++
++ mutex_unlock(&retu_rtc_mutex);
++
++ return count;
++}
++
++static DEVICE_ATTR(time, S_IRUGO | S_IWUSR, retu_rtc_time_show,
++ retu_rtc_time_store);
++
++
++static ssize_t retu_rtc_reset_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ /*
++ * Returns the status of the rtc
++ *
++ * 0: no reset has occurred or the status has been cleared
++ * 1: a reset has occurred
++ *
++ * RTC needs to be reset only when both main battery
++ * _AND_ backup battery are discharged
++ */
++ return sprintf(buf, "%u\n", retu_rtc_reset_occurred);
++}
++
++static void retu_rtc_do_reset(void)
++{
++ u16 ccr1;
++
++ ccr1 = retu_read_reg(RETU_REG_CC1);
++ /* RTC in reset */
++ retu_write_reg(RETU_REG_CC1, ccr1 | 0x0001);
++ /* RTC in normal operating mode */
++ retu_write_reg(RETU_REG_CC1, ccr1 & ~0x0001);
++
++ retu_rtc_barrier();
++ /* Disable alarm and RTC WD */
++ retu_write_reg(RETU_REG_RTCHMAR, 0x7f3f);
++ /* Set Calibration register to default value */
++ retu_write_reg(RETU_REG_RTCCALR, 0x00c0);
++
++ retu_rtc_alarm_expired = 0;
++ retu_rtc_reset_occurred = 1;
++}
++
++static ssize_t retu_rtc_reset_store(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ unsigned choice;
++
++ if(sscanf(buf, "%u", &choice) != 1)
++ return count;
++ mutex_lock(&retu_rtc_mutex);
++ if (choice == 0)
++ retu_rtc_reset_occurred = 0;
++ else if (choice == 1)
++ retu_rtc_do_reset();
++ mutex_unlock(&retu_rtc_mutex);
++ return count;
++}
++
++static DEVICE_ATTR(reset, S_IRUGO | S_IWUSR, retu_rtc_reset_show,
++ retu_rtc_reset_store);
++
++static ssize_t retu_rtc_alarm_show(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ u16 chmar;
++ ssize_t retval;
++
++ mutex_lock(&retu_rtc_mutex);
++ /*
++ * Format a 16-bit date-string for userspace
++ *
++ * hours | minutes
++ * 8 bits for each.
++ */
++ chmar = retu_read_reg(RETU_REG_RTCHMAR);
++ /* No shifting needed, only masking unrelated bits */
++ retval = sprintf(buf, "0x%04x\n", chmar & 0x1f3f);
++ mutex_unlock(&retu_rtc_mutex);
++
++ return retval;
++}
++
++static ssize_t retu_rtc_alarm_store(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ u16 chmar;
++ unsigned alrm;
++ unsigned hours;
++ unsigned minutes;
++
++ mutex_lock(&retu_rtc_mutex);
++
++ if(sscanf(buf, "%x", &alrm) != 1)
++ return count;
++ hours = (alrm >> 8) & 0x001f;
++ minutes = (alrm >> 0) & 0x003f;
++ if ((hours < 24 && minutes < 60) || (hours == 24 && minutes == 60)) {
++ /*
++ * OK, the time format for the alarm is valid (including the
++ * disabling values)
++ */
++ /* Keeps the RTC watchdog status */
++ chmar = retu_read_reg(RETU_REG_RTCHMAR) & 0x6000;
++ chmar |= alrm & 0x1f3f; /* Stores the requested alarm */
++ retu_rtc_barrier();
++ retu_write_reg(RETU_REG_RTCHMAR, chmar);
++ /* If the alarm is being disabled */
++ if (hours == 24 && minutes == 60) {
++ /* disable the interrupt */
++ retu_disable_irq(RETU_INT_RTCA);
++ retu_rtc_alarm_expired = 0;
++ } else
++ /* enable the interrupt */
++ retu_enable_irq(RETU_INT_RTCA);
++ }
++ mutex_unlock(&retu_rtc_mutex);
++
++ return count;
++}
++
++static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, retu_rtc_alarm_show,
++ retu_rtc_alarm_store);
++
++static ssize_t retu_rtc_alarm_expired_show(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ ssize_t retval;
++
++ retval = sprintf(buf, "%u\n", retu_rtc_alarm_expired);
++
++ return retval;
++}
++
++static ssize_t retu_rtc_alarm_expired_store(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ retu_rtc_alarm_expired = 0;
++
++ return count;
++}
++
++static DEVICE_ATTR(alarm_expired, S_IRUGO | S_IWUSR, retu_rtc_alarm_expired_show,
++ retu_rtc_alarm_expired_store);
++
++
++static ssize_t retu_rtc_cal_show(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ u16 rtccalr1;
++
++ mutex_lock(&retu_rtc_mutex);
++ rtccalr1 = retu_read_reg(RETU_REG_RTCCALR);
++ mutex_unlock(&retu_rtc_mutex);
++
++ /*
++ * Shows the status of the Calibration Register.
++ *
++ * Default, after power loss: 0x0000
++ * Default, for R&D: 0x00C0
++ * Default, for factory: 0x00??
++ *
++ */
++ return sprintf(buf, "0x%04x\n", rtccalr1 & 0x00ff);
++}
++
++static ssize_t retu_rtc_cal_store(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ unsigned calibration_value;
++
++ if (sscanf(buf, "%x", &calibration_value) != 1)
++ return count;
++
++ mutex_lock(&retu_rtc_mutex);
++ retu_rtc_barrier();
++ retu_write_reg(RETU_REG_RTCCALR, calibration_value & 0x00ff);
++ mutex_unlock(&retu_rtc_mutex);
++
++ return count;
++}
++
++static DEVICE_ATTR(cal, S_IRUGO | S_IWUSR, retu_rtc_cal_show,
++ retu_rtc_cal_store);
++
++static struct platform_device retu_rtc_device;
++
++static void retu_rtca_disable(void)
++{
++ retu_disable_irq(RETU_INT_RTCA);
++ retu_rtc_alarm_expired = 1;
++ retu_rtc_barrier();
++ retu_write_reg(RETU_REG_RTCHMAR, (24 << 8) | 60);
++}
++
++static void retu_rtca_expired(struct work_struct *unused)
++{
++ retu_rtca_disable();
++ sysfs_notify(&retu_rtc_device.dev.kobj, NULL, "alarm_expired");
++}
++
++DECLARE_WORK(retu_rtca_work, retu_rtca_expired);
++
++/*
++ * RTCHMR RTCHMAR RTCCAL must be accessed within 0.9 s since the seconds
++ * interrupt has been signaled in the IDR register
++ */
++static void retu_rtcs_interrupt(unsigned long unused)
++{
++ retu_ack_irq(RETU_INT_RTCS);
++ complete_all(&retu_rtc_sync);
++}
++
++static void retu_rtca_interrupt(unsigned long unused)
++{
++ retu_ack_irq(RETU_INT_RTCA);
++ schedule_work(&retu_rtca_work);
++}
++
++static int retu_rtc_init_irq(void)
++{
++ int ret;
++
++ ret = retu_request_irq(RETU_INT_RTCS, retu_rtcs_interrupt, 0, "RTCS");
++ if (ret != 0)
++ return ret;
++ /*
++ * We will take care of enabling and disabling the interrupt
++ * elsewhere, so leave it off by default..
++ */
++ retu_disable_irq(RETU_INT_RTCS);
++
++ ret = retu_request_irq(RETU_INT_RTCA, retu_rtca_interrupt, 0, "RTCA");
++ if (ret != 0) {
++ retu_free_irq(RETU_INT_RTCS);
++ return ret;
++ }
++ retu_disable_irq(RETU_INT_RTCA);
++
++ return 0;
++}
++
++
++static int __devinit retu_rtc_probe(struct device *dev)
++{
++ int r;
++
++ retu_rtc_alarm_expired = retu_read_reg(RETU_REG_IDR) &
++ (0x1 << RETU_INT_RTCA);
++
++ if ((r = retu_rtc_init_irq()) != 0)
++ return r;
++
++ mutex_init(&retu_rtc_mutex);
++
++ /* If the calibration register is zero, we've probably lost
++ * power */
++ if (retu_read_reg(RETU_REG_RTCCALR) & 0x00ff)
++ retu_rtc_reset_occurred = 0;
++ else
++ retu_rtc_do_reset();
++
++ if ((r = device_create_file(dev, &dev_attr_time)) != 0)
++ return r;
++ else if ((r = device_create_file(dev, &dev_attr_reset)) != 0)
++ goto err_unregister_time;
++ else if ((r = device_create_file(dev, &dev_attr_alarm)) != 0)
++ goto err_unregister_reset;
++ else if ((r = device_create_file(dev, &dev_attr_alarm_expired)) != 0)
++ goto err_unregister_alarm;
++ else if ((r = device_create_file(dev, &dev_attr_cal)) != 0)
++ goto err_unregister_alarm_expired;
++ else
++ return r;
++
++err_unregister_alarm_expired:
++ device_remove_file(dev, &dev_attr_alarm_expired);
++err_unregister_alarm:
++ device_remove_file(dev, &dev_attr_alarm);
++err_unregister_reset:
++ device_remove_file(dev, &dev_attr_reset);
++err_unregister_time:
++ device_remove_file(dev, &dev_attr_time);
++ return r;
++}
++
++static int __devexit retu_rtc_remove(struct device *dev)
++{
++ retu_disable_irq(RETU_INT_RTCS);
++ retu_free_irq(RETU_INT_RTCS);
++ retu_free_irq(RETU_INT_RTCA);
++ device_remove_file(dev, &dev_attr_cal);
++ device_remove_file(dev, &dev_attr_alarm_expired);
++ device_remove_file(dev, &dev_attr_alarm);
++ device_remove_file(dev, &dev_attr_reset);
++ device_remove_file(dev, &dev_attr_time);
++ return 0;
++}
++
++static struct device_driver retu_rtc_driver = {
++ .name = "retu-rtc",
++ .bus = &platform_bus_type,
++ .probe = retu_rtc_probe,
++ .remove = __devexit_p(retu_rtc_remove),
++};
++
++static struct platform_device retu_rtc_device = {
++ .name = "retu-rtc",
++ .id = -1,
++ .dev = {
++ .release = retu_rtc_device_release,
++ },
++};
++
++/* This function provides syncronization with the RTCS interrupt handler */
++static void retu_rtc_barrier(void)
++{
++ INIT_COMPLETION(retu_rtc_sync);
++ retu_ack_irq(RETU_INT_RTCS);
++ retu_enable_irq(RETU_INT_RTCS);
++ wait_for_completion(&retu_rtc_sync);
++ retu_disable_irq(RETU_INT_RTCS);
++}
++
++static int __init retu_rtc_init(void)
++{
++ int ret;
++
++ init_completion(&retu_rtc_exited);
++
++ if ((ret = driver_register(&retu_rtc_driver)) != 0)
++ return ret;
++
++ if ((ret = platform_device_register(&retu_rtc_device)) != 0)
++ goto err_unregister_driver;
++
++ return 0;
++
++err_unregister_driver:
++ driver_unregister(&retu_rtc_driver);
++ return ret;
++}
++
++static void __exit retu_rtc_exit(void)
++{
++ platform_device_unregister(&retu_rtc_device);
++ driver_unregister(&retu_rtc_driver);
++
++ wait_for_completion(&retu_rtc_exited);
++}
++
++module_init(retu_rtc_init);
++module_exit(retu_rtc_exit);
++
++MODULE_DESCRIPTION("Retu RTC");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Paul Mundt and Igor Stoppa");
+diff --git a/drivers/cbus/retu-user.c b/drivers/cbus/retu-user.c
+new file mode 100644
+index 0000000..74a7d61
+--- /dev/null
++++ b/drivers/cbus/retu-user.c
+@@ -0,0 +1,423 @@
++/**
++ * drivers/cbus/retu-user.c
++ *
++ * Retu user space interface functions
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/poll.h>
++#include <linux/list.h>
++#include <linux/spinlock.h>
++#include <linux/mutex.h>
++
++#include <asm/uaccess.h>
++
++#include "retu.h"
++
++#include "user_retu_tahvo.h"
++
++/* Maximum size of IRQ node buffer/pool */
++#define RETU_MAX_IRQ_BUF_LEN 16
++
++#define PFX "retu-user: "
++
++/* Bitmap for marking the interrupt sources as having the handlers */
++static u32 retu_irq_bits;
++
++/* For allowing only one user process to subscribe to the retu interrupts */
++static struct file *retu_irq_subscr = NULL;
++
++/* For poll and IRQ passing */
++struct retu_irq {
++ u32 id;
++ struct list_head node;
++};
++
++static spinlock_t retu_irqs_lock;
++static struct retu_irq *retu_irq_block;
++static LIST_HEAD(retu_irqs);
++static LIST_HEAD(retu_irqs_reserve);
++
++/* Wait queue - used when user wants to read the device */
++DECLARE_WAIT_QUEUE_HEAD(retu_user_waitqueue);
++
++/* Semaphore to protect irq subscription sequence */
++static struct mutex retu_mutex;
++
++/* This array specifies RETU register types (read/write/toggle) */
++static const u8 retu_access_bits[] = {
++ 1,
++ 4,
++ 3,
++ 3,
++ 1,
++ 3,
++ 3,
++ 0,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 4,
++ 4,
++ 3,
++ 0,
++ 0,
++ 0,
++ 0,
++ 1,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3
++};
++
++/*
++ * The handler for all RETU interrupts.
++ *
++ * arg is the interrupt source in RETU.
++ */
++static void retu_user_irq_handler(unsigned long arg)
++{
++ struct retu_irq *irq;
++
++ retu_ack_irq(arg);
++
++ spin_lock(&retu_irqs_lock);
++ if (list_empty(&retu_irqs_reserve)) {
++ spin_unlock(&retu_irqs_lock);
++ return;
++ }
++ irq = list_entry((&retu_irqs_reserve)->next, struct retu_irq, node);
++ irq->id = arg;
++ list_move_tail(&irq->node, &retu_irqs);
++ spin_unlock(&retu_irqs_lock);
++
++ /* wake up waiting thread */
++ wake_up(&retu_user_waitqueue);
++}
++
++/*
++ * This routine sets up the interrupt handler and marks an interrupt source
++ * in RETU as a candidate for signal delivery to the user process.
++ */
++static int retu_user_subscribe_to_irq(int id, struct file *filp)
++{
++ int ret;
++
++ mutex_lock(&retu_mutex);
++ if ((retu_irq_subscr != NULL) && (retu_irq_subscr != filp)) {
++ mutex_unlock(&retu_mutex);
++ return -EBUSY;
++ }
++ /* Store the file pointer of the first user process registering IRQs */
++ retu_irq_subscr = filp;
++ mutex_unlock(&retu_mutex);
++
++ if (retu_irq_bits & (1 << id))
++ return 0;
++
++ ret = retu_request_irq(id, retu_user_irq_handler, id, "");
++ if (ret < 0)
++ return ret;
++
++ /* Mark that this interrupt has a handler */
++ retu_irq_bits |= 1 << id;
++
++ return 0;
++}
++
++/*
++ * Unregisters all RETU interrupt handlers.
++ */
++static void retu_unreg_irq_handlers(void)
++{
++ int id;
++
++ if (!retu_irq_bits)
++ return;
++
++ for (id = 0; id < MAX_RETU_IRQ_HANDLERS; id++)
++ if (retu_irq_bits & (1 << id))
++ retu_free_irq(id);
++
++ retu_irq_bits = 0;
++}
++
++/*
++ * Write to RETU register.
++ * Returns 0 upon success, a negative error value otherwise.
++ */
++static int retu_user_write_with_mask(u32 field, u16 value)
++{
++ u32 mask;
++ u32 reg;
++ u_short tmp;
++ unsigned long flags;
++
++ mask = MASK(field);
++ reg = REG(field);
++
++ /* Detect bad mask and reg */
++ if (mask == 0 || reg > RETU_REG_MAX ||
++ retu_access_bits[reg] == READ_ONLY) {
++ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
++ reg, mask);
++ return -EINVAL;
++ }
++
++ /* Justify value according to mask */
++ while (!(mask & 1)) {
++ value = value << 1;
++ mask = mask >> 1;
++ }
++
++ spin_lock_irqsave(&retu_lock, flags);
++ if (retu_access_bits[reg] == TOGGLE) {
++ /* No need to detect previous content of register */
++ tmp = 0;
++ } else {
++ /* Read current value of register */
++ tmp = retu_read_reg(reg);
++ }
++
++ /* Generate new value */
++ tmp = (tmp & ~MASK(field)) | (value & MASK(field));
++ /* Write data to RETU */
++ retu_write_reg(reg, tmp);
++ spin_unlock_irqrestore(&retu_lock, flags);
++
++ return 0;
++}
++
++/*
++ * Read RETU register.
++ */
++static u32 retu_user_read_with_mask(u32 field)
++{
++ u_short value;
++ u32 mask, reg;
++
++ mask = MASK(field);
++ reg = REG(field);
++
++ /* Detect bad mask and reg */
++ if (mask == 0 || reg > RETU_REG_MAX) {
++ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
++ reg, mask);
++ return -EINVAL;
++ }
++
++ /* Read the register */
++ value = retu_read_reg(reg) & mask;
++
++ /* Right justify value */
++ while (!(mask & 1)) {
++ value = value >> 1;
++ mask = mask >> 1;
++ }
++
++ return value;
++}
++
++/*
++ * Close device
++ */
++static int retu_close(struct inode *inode, struct file *filp)
++{
++ /* Unregister all interrupts that have been registered */
++ if (retu_irq_subscr == filp) {
++ retu_unreg_irq_handlers();
++ retu_irq_subscr = NULL;
++ }
++
++ return 0;
++}
++
++/*
++ * Device control (ioctl)
++ */
++static int retu_ioctl(struct inode *inode, struct file *filp,
++ unsigned int cmd, unsigned long arg)
++{
++ struct retu_tahvo_write_parms par;
++ int ret;
++
++ switch (cmd) {
++ case URT_IOCT_IRQ_SUBSCR:
++ return retu_user_subscribe_to_irq(arg, filp);
++ case RETU_IOCH_READ:
++ return retu_user_read_with_mask(arg);
++ case RETU_IOCX_WRITE:
++ ret = copy_from_user(&par, (void __user *) arg, sizeof(par));
++ if (ret)
++ printk(KERN_ERR "copy_from_user failed: %d\n", ret);
++ par.result = retu_user_write_with_mask(par.field, par.value);
++ ret = copy_to_user((void __user *) arg, &par, sizeof(par));
++ if (ret)
++ printk(KERN_ERR "copy_to_user failed: %d\n", ret);
++ break;
++ case RETU_IOCH_ADC_READ:
++ return retu_read_adc(arg);
++ default:
++ return -ENOIOCTLCMD;
++ }
++ return 0;
++}
++
++/*
++ * Read from device
++ */
++static ssize_t retu_read(struct file *filp, char *buf, size_t count,
++ loff_t * offp)
++{
++ struct retu_irq *irq;
++
++ u32 nr, i;
++
++ /* read not permitted if neither filp nor anyone has registered IRQs */
++ if (retu_irq_subscr != filp)
++ return -EPERM;
++
++ if ((count < sizeof(u32)) || ((count % sizeof(u32)) != 0))
++ return -EINVAL;
++
++ nr = count / sizeof(u32);
++
++ for (i = 0; i < nr; i++) {
++ unsigned long flags;
++ u32 irq_id;
++ int ret;
++
++ ret = wait_event_interruptible(retu_user_waitqueue,
++ !list_empty(&retu_irqs));
++ if (ret < 0)
++ return ret;
++
++ spin_lock_irqsave(&retu_irqs_lock, flags);
++ irq = list_entry((&retu_irqs)->next, struct retu_irq, node);
++ irq_id = irq->id;
++ list_move(&irq->node, &retu_irqs_reserve);
++ spin_unlock_irqrestore(&retu_irqs_lock, flags);
++
++ ret = copy_to_user(buf + i * sizeof(irq_id), &irq_id,
++ sizeof(irq_id));
++ if (ret)
++ printk(KERN_ERR "copy_to_user failed: %d\n", ret);
++ }
++
++ return count;
++}
++
++/*
++ * Poll method
++ */
++static unsigned retu_poll(struct file *filp, struct poll_table_struct *pt)
++{
++ if (!list_empty(&retu_irqs))
++ return POLLIN;
++
++ poll_wait(filp, &retu_user_waitqueue, pt);
++
++ if (!list_empty(&retu_irqs))
++ return POLLIN;
++ else
++ return 0;
++}
++
++static struct file_operations retu_user_fileops = {
++ .owner = THIS_MODULE,
++ .ioctl = retu_ioctl,
++ .read = retu_read,
++ .release = retu_close,
++ .poll = retu_poll
++};
++
++static struct miscdevice retu_device = {
++ .minor = MISC_DYNAMIC_MINOR,
++ .name = "retu",
++ .fops = &retu_user_fileops
++};
++
++/*
++ * Initialization
++ *
++ * @return 0 if successful, error value otherwise.
++ */
++int retu_user_init(void)
++{
++ struct retu_irq *irq;
++ int res, i;
++
++ irq = kmalloc(sizeof(*irq) * RETU_MAX_IRQ_BUF_LEN, GFP_KERNEL);
++ if (irq == NULL) {
++ printk(KERN_ERR PFX "kmalloc failed\n");
++ return -ENOMEM;
++ }
++ memset(irq, 0, sizeof(*irq) * RETU_MAX_IRQ_BUF_LEN);
++ for (i = 0; i < RETU_MAX_IRQ_BUF_LEN; i++)
++ list_add(&irq[i].node, &retu_irqs_reserve);
++
++ retu_irq_block = irq;
++
++ spin_lock_init(&retu_irqs_lock);
++ mutex_init(&retu_mutex);
++
++ /* Request a misc device */
++ res = misc_register(&retu_device);
++ if (res < 0) {
++ printk(KERN_ERR PFX "unable to register misc device for %s\n",
++ retu_device.name);
++ kfree(irq);
++ return res;
++ }
++
++ return 0;
++}
++
++/*
++ * Cleanup.
++ */
++void retu_user_cleanup(void)
++{
++ /* Unregister our misc device */
++ misc_deregister(&retu_device);
++ /* Unregister and disable all RETU interrupts used by this module */
++ retu_unreg_irq_handlers();
++ kfree(retu_irq_block);
++}
++
++MODULE_DESCRIPTION("Retu ASIC user space functions");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Mikko Ylinen");
+diff --git a/drivers/cbus/retu-wdt.c b/drivers/cbus/retu-wdt.c
+new file mode 100644
+index 0000000..b7b20b7
+--- /dev/null
++++ b/drivers/cbus/retu-wdt.c
+@@ -0,0 +1,202 @@
++/**
++ * drivers/cbus/retu-wdt.c
++ *
++ * Driver for Retu watchdog
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Amit Kucheria <amit.kucheria@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/init.h>
++
++#include <linux/completion.h>
++#include <linux/errno.h>
++#include <linux/moduleparam.h>
++#include <linux/platform_device.h>
++
++#include "cbus.h"
++#include "retu.h"
++
++/* Watchdog timeout in seconds */
++#define RETU_WDT_MIN_TIMER 0
++#define RETU_WDT_DEFAULT_TIMER 32
++#define RETU_WDT_MAX_TIMER 63
++
++static struct completion retu_wdt_completion;
++static DEFINE_MUTEX(retu_wdt_mutex);
++
++/* Current period of watchdog */
++static unsigned int period_val = RETU_WDT_DEFAULT_TIMER;
++static int counter_param = RETU_WDT_MAX_TIMER;
++
++static int retu_modify_counter(unsigned int new)
++{
++ int ret = 0;
++
++ if (new < RETU_WDT_MIN_TIMER || new > RETU_WDT_MAX_TIMER)
++ return -EINVAL;
++
++ mutex_lock(&retu_wdt_mutex);
++
++ period_val = new;
++ retu_write_reg(RETU_REG_WATCHDOG, (u16)period_val);
++
++ mutex_unlock(&retu_wdt_mutex);
++ return ret;
++}
++
++static ssize_t retu_wdt_period_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ /* Show current max counter */
++ return sprintf(buf, "%u\n", (u16)period_val);
++}
++
++static ssize_t retu_wdt_period_store(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ unsigned int new_period;
++ int ret;
++
++ if (sscanf(buf, "%u", &new_period) != 1) {
++ printk(KERN_ALERT "retu_wdt_period_store: Invalid input\n");
++ return -EINVAL;
++ }
++
++ ret = retu_modify_counter(new_period);
++ if (ret < 0)
++ return ret;
++
++ return strnlen(buf, count);
++}
++
++static ssize_t retu_wdt_counter_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ u16 counter;
++
++ /* Show current value in watchdog counter */
++ counter = retu_read_reg(RETU_REG_WATCHDOG);
++
++ /* Only the 5 LSB are important */
++ return snprintf(buf, PAGE_SIZE, "%u\n", (counter & 0x3F));
++}
++
++static DEVICE_ATTR(period, S_IRUGO | S_IWUSR, retu_wdt_period_show, \
++ retu_wdt_period_store);
++static DEVICE_ATTR(counter, S_IRUGO, retu_wdt_counter_show, NULL);
++
++static int __devinit retu_wdt_probe(struct device *dev)
++{
++ int ret;
++
++ ret = device_create_file(dev, &dev_attr_period);
++ if (ret) {
++ printk(KERN_ERR "retu_wdt_probe: Error creating "
++ "sys device file: period\n");
++ return ret;
++ }
++
++ ret = device_create_file(dev, &dev_attr_counter);
++ if (ret) {
++ device_remove_file(dev, &dev_attr_period);
++ printk(KERN_ERR "retu_wdt_probe: Error creating "
++ "sys device file: counter\n");
++ }
++
++ return ret;
++}
++
++static int __devexit retu_wdt_remove(struct device *dev)
++{
++ device_remove_file(dev, &dev_attr_period);
++ device_remove_file(dev, &dev_attr_counter);
++ return 0;
++}
++
++static void retu_wdt_device_release(struct device *dev)
++{
++ complete(&retu_wdt_completion);
++}
++
++static struct platform_device retu_wdt_device = {
++ .name = "retu-watchdog",
++ .id = -1,
++ .dev = {
++ .release = retu_wdt_device_release,
++ },
++};
++
++static struct device_driver retu_wdt_driver = {
++ .name = "retu-watchdog",
++ .bus = &platform_bus_type,
++ .probe = retu_wdt_probe,
++ .remove = __devexit_p(retu_wdt_remove),
++};
++
++static int __init retu_wdt_init(void)
++{
++ int ret;
++
++ init_completion(&retu_wdt_completion);
++
++ ret = driver_register(&retu_wdt_driver);
++ if (ret)
++ return ret;
++
++ ret = platform_device_register(&retu_wdt_device);
++ if (ret)
++ goto exit1;
++
++ /* passed as module parameter? */
++ ret = retu_modify_counter(counter_param);
++ if (ret == -EINVAL) {
++ ret = retu_modify_counter(RETU_WDT_DEFAULT_TIMER);
++ printk(KERN_INFO
++ "retu_wdt_init: Intializing to default value\n");
++ }
++
++ printk(KERN_INFO "Retu watchdog driver initialized\n");
++ return ret;
++
++exit1:
++ driver_unregister(&retu_wdt_driver);
++ wait_for_completion(&retu_wdt_completion);
++
++ return ret;
++}
++
++static void __exit retu_wdt_exit(void)
++{
++ platform_device_unregister(&retu_wdt_device);
++ driver_unregister(&retu_wdt_driver);
++
++ wait_for_completion(&retu_wdt_completion);
++}
++
++module_init(retu_wdt_init);
++module_exit(retu_wdt_exit);
++module_param(counter_param, int, 0);
++
++MODULE_DESCRIPTION("Retu WatchDog");
++MODULE_AUTHOR("Amit Kucheria");
++MODULE_LICENSE("GPL");
++
+diff --git a/drivers/cbus/retu.c b/drivers/cbus/retu.c
+new file mode 100644
+index 0000000..84d7840
+--- /dev/null
++++ b/drivers/cbus/retu.c
+@@ -0,0 +1,467 @@
++/**
++ * drivers/cbus/retu.c
++ *
++ * Support functions for Retu ASIC
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
++ * David Weinehall <david.weinehall@nokia.com>, and
++ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/device.h>
++#include <linux/miscdevice.h>
++#include <linux/poll.h>
++#include <linux/fs.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#include <asm/uaccess.h>
++
++#include <mach/mux.h>
++#include <mach/board.h>
++#include <mach/board-nokia.h>
++
++#include "cbus.h"
++#include "retu.h"
++
++#define RETU_ID 0x01
++#define PFX "retu: "
++
++static int retu_initialized;
++static int retu_irq_pin;
++static int retu_is_vilma;
++
++static struct tasklet_struct retu_tasklet;
++spinlock_t retu_lock = SPIN_LOCK_UNLOCKED;
++
++static struct completion device_release;
++
++struct retu_irq_handler_desc {
++ int (*func)(unsigned long);
++ unsigned long arg;
++ char name[8];
++};
++
++static struct retu_irq_handler_desc retu_irq_handlers[MAX_RETU_IRQ_HANDLERS];
++
++/**
++ * retu_read_reg - Read a value from a register in Retu
++ * @reg: the register to read from
++ *
++ * This function returns the contents of the specified register
++ */
++int retu_read_reg(int reg)
++{
++ BUG_ON(!retu_initialized);
++ return cbus_read_reg(cbus_host, RETU_ID, reg);
++}
++
++/**
++ * retu_write_reg - Write a value to a register in Retu
++ * @reg: the register to write to
++ * @reg: the value to write to the register
++ *
++ * This function writes a value to the specified register
++ */
++void retu_write_reg(int reg, u16 val)
++{
++ BUG_ON(!retu_initialized);
++ cbus_write_reg(cbus_host, RETU_ID, reg, val);
++}
++
++void retu_set_clear_reg_bits(int reg, u16 set, u16 clear)
++{
++ unsigned long flags;
++ u16 w;
++
++ spin_lock_irqsave(&retu_lock, flags);
++ w = retu_read_reg(reg);
++ w &= ~clear;
++ w |= set;
++ retu_write_reg(reg, w);
++ spin_unlock_irqrestore(&retu_lock, flags);
++}
++
++#define ADC_MAX_CHAN_NUMBER 13
++
++int retu_read_adc(int channel)
++{
++ unsigned long flags;
++ int res;
++
++ if (channel < 0 || channel > ADC_MAX_CHAN_NUMBER)
++ return -EINVAL;
++
++ spin_lock_irqsave(&retu_lock, flags);
++
++ if ((channel == 8) && retu_is_vilma) {
++ int scr = retu_read_reg(RETU_REG_ADCSCR);
++ int ch = (retu_read_reg(RETU_REG_ADCR) >> 10) & 0xf;
++ if (((scr & 0xff) != 0) && (ch != 8))
++ retu_write_reg (RETU_REG_ADCSCR, (scr & ~0xff));
++ }
++
++ /* Select the channel and read result */
++ retu_write_reg(RETU_REG_ADCR, channel << 10);
++ res = retu_read_reg(RETU_REG_ADCR) & 0x3ff;
++
++ if (retu_is_vilma)
++ retu_write_reg(RETU_REG_ADCR, (1 << 13));
++
++ /* Unlock retu */
++ spin_unlock_irqrestore(&retu_lock, flags);
++
++ return res;
++}
++
++
++static u16 retu_disable_bogus_irqs(u16 mask)
++{
++ int i;
++
++ for (i = 0; i < MAX_RETU_IRQ_HANDLERS; i++) {
++ if (mask & (1 << i))
++ continue;
++ if (retu_irq_handlers[i].func != NULL)
++ continue;
++ /* an IRQ was enabled but we don't have a handler for it */
++ printk(KERN_INFO PFX "disabling bogus IRQ %d\n", i);
++ mask |= (1 << i);
++ }
++ return mask;
++}
++
++/*
++ * Disable given RETU interrupt
++ */
++void retu_disable_irq(int id)
++{
++ unsigned long flags;
++ u16 mask;
++
++ spin_lock_irqsave(&retu_lock, flags);
++ mask = retu_read_reg(RETU_REG_IMR);
++ mask |= 1 << id;
++ mask = retu_disable_bogus_irqs(mask);
++ retu_write_reg(RETU_REG_IMR, mask);
++ spin_unlock_irqrestore(&retu_lock, flags);
++}
++
++/*
++ * Enable given RETU interrupt
++ */
++void retu_enable_irq(int id)
++{
++ unsigned long flags;
++ u16 mask;
++
++ if (id == 3) {
++ printk("Enabling Retu IRQ %d\n", id);
++ dump_stack();
++ }
++ spin_lock_irqsave(&retu_lock, flags);
++ mask = retu_read_reg(RETU_REG_IMR);
++ mask &= ~(1 << id);
++ mask = retu_disable_bogus_irqs(mask);
++ retu_write_reg(RETU_REG_IMR, mask);
++ spin_unlock_irqrestore(&retu_lock, flags);
++}
++
++/*
++ * Acknowledge given RETU interrupt
++ */
++void retu_ack_irq(int id)
++{
++ retu_write_reg(RETU_REG_IDR, 1 << id);
++}
++
++/*
++ * RETU interrupt handler. Only schedules the tasklet.
++ */
++static irqreturn_t retu_irq_handler(int irq, void *dev_id)
++{
++ tasklet_schedule(&retu_tasklet);
++ return IRQ_HANDLED;
++}
++
++/*
++ * Tasklet handler
++ */
++static void retu_tasklet_handler(unsigned long data)
++{
++ struct retu_irq_handler_desc *hnd;
++ u16 id;
++ u16 im;
++ int i;
++
++ for (;;) {
++ id = retu_read_reg(RETU_REG_IDR);
++ im = ~retu_read_reg(RETU_REG_IMR);
++ id &= im;
++
++ if (!id)
++ break;
++
++ for (i = 0; id != 0; i++, id >>= 1) {
++ if (!(id & 1))
++ continue;
++ hnd = &retu_irq_handlers[i];
++ if (hnd->func == NULL) {
++ /* Spurious retu interrupt - disable and ack it */
++ printk(KERN_INFO "Spurious Retu interrupt "
++ "(id %d)\n", i);
++ retu_disable_irq(i);
++ retu_ack_irq(i);
++ continue;
++ }
++ hnd->func(hnd->arg);
++ /*
++ * Don't acknowledge the interrupt here
++ * It must be done explicitly
++ */
++ }
++ }
++}
++
++/*
++ * Register the handler for a given RETU interrupt source.
++ */
++int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name)
++{
++ struct retu_irq_handler_desc *hnd;
++
++ if (irq_handler == NULL || id >= MAX_RETU_IRQ_HANDLERS ||
++ name == NULL) {
++ printk(KERN_ERR PFX "Invalid arguments to %s\n",
++ __FUNCTION__);
++ return -EINVAL;
++ }
++ hnd = &retu_irq_handlers[id];
++ if (hnd->func != NULL) {
++ printk(KERN_ERR PFX "IRQ %d already reserved\n", id);
++ return -EBUSY;
++ }
++ printk(KERN_INFO PFX "Registering interrupt %d for device %s\n",
++ id, name);
++ hnd->func = irq_handler;
++ hnd->arg = arg;
++ strlcpy(hnd->name, name, sizeof(hnd->name));
++
++ retu_ack_irq(id);
++ retu_enable_irq(id);
++
++ return 0;
++}
++
++/*
++ * Unregister the handler for a given RETU interrupt source.
++ */
++void retu_free_irq(int id)
++{
++ struct retu_irq_handler_desc *hnd;
++
++ if (id >= MAX_RETU_IRQ_HANDLERS) {
++ printk(KERN_ERR PFX "Invalid argument to %s\n",
++ __FUNCTION__);
++ return;
++ }
++ hnd = &retu_irq_handlers[id];
++ if (hnd->func == NULL) {
++ printk(KERN_ERR PFX "IRQ %d already freed\n", id);
++ return;
++ }
++
++ retu_disable_irq(id);
++ hnd->func = NULL;
++}
++
++/**
++ * retu_power_off - Shut down power to system
++ *
++ * This function puts the system in power off state
++ */
++static void retu_power_off(void)
++{
++ /* Ignore power button state */
++ retu_write_reg(RETU_REG_CC1, retu_read_reg(RETU_REG_CC1) | 2);
++ /* Expire watchdog immediately */
++ retu_write_reg(RETU_REG_WATCHDOG, 0);
++ /* Wait for poweroff*/
++ for (;;);
++}
++
++/**
++ * retu_probe - Probe for Retu ASIC
++ * @dev: the Retu device
++ *
++ * Probe for the Retu ASIC and allocate memory
++ * for its device-struct if found
++ */
++static int __devinit retu_probe(struct device *dev)
++{
++ const struct omap_em_asic_bb5_config * em_asic_config;
++ int rev, ret;
++
++ /* Prepare tasklet */
++ tasklet_init(&retu_tasklet, retu_tasklet_handler, 0);
++
++ em_asic_config = omap_get_config(OMAP_TAG_EM_ASIC_BB5,
++ struct omap_em_asic_bb5_config);
++ if (em_asic_config == NULL) {
++ printk(KERN_ERR PFX "Unable to retrieve config data\n");
++ return -ENODATA;
++ }
++
++ retu_irq_pin = em_asic_config->retu_irq_gpio;
++
++ if ((ret = gpio_request(retu_irq_pin, "RETU irq")) < 0) {
++ printk(KERN_ERR PFX "Unable to reserve IRQ GPIO\n");
++ return ret;
++ }
++
++ /* Set the pin as input */
++ gpio_direction_input(retu_irq_pin);
++
++ /* Rising edge triggers the IRQ */
++ set_irq_type(gpio_to_irq(retu_irq_pin), IRQ_TYPE_EDGE_RISING);
++
++ retu_initialized = 1;
++
++ rev = retu_read_reg(RETU_REG_ASICR) & 0xff;
++ if (rev & (1 << 7))
++ retu_is_vilma = 1;
++
++ printk(KERN_INFO "%s v%d.%d found\n", retu_is_vilma ? "Vilma" : "Retu",
++ (rev >> 4) & 0x07, rev & 0x0f);
++
++ /* Mask all RETU interrupts */
++ retu_write_reg(RETU_REG_IMR, 0xffff);
++
++ ret = request_irq(gpio_to_irq(retu_irq_pin), retu_irq_handler, 0,
++ "retu", 0);
++ if (ret < 0) {
++ printk(KERN_ERR PFX "Unable to register IRQ handler\n");
++ gpio_free(retu_irq_pin);
++ return ret;
++ }
++ set_irq_wake(gpio_to_irq(retu_irq_pin), 1);
++
++ /* Register power off function */
++ pm_power_off = retu_power_off;
++
++#ifdef CONFIG_CBUS_RETU_USER
++ /* Initialize user-space interface */
++ if (retu_user_init() < 0) {
++ printk(KERN_ERR "Unable to initialize driver\n");
++ free_irq(gpio_to_irq(retu_irq_pin), 0);
++ gpio_free(retu_irq_pin);
++ return ret;
++ }
++#endif
++
++ return 0;
++}
++
++static int retu_remove(struct device *dev)
++{
++#ifdef CONFIG_CBUS_RETU_USER
++ retu_user_cleanup();
++#endif
++ /* Mask all RETU interrupts */
++ retu_write_reg(RETU_REG_IMR, 0xffff);
++ free_irq(gpio_to_irq(retu_irq_pin), 0);
++ gpio_free(retu_irq_pin);
++ tasklet_kill(&retu_tasklet);
++
++ return 0;
++}
++
++static void retu_device_release(struct device *dev)
++{
++ complete(&device_release);
++}
++
++static struct device_driver retu_driver = {
++ .name = "retu",
++ .bus = &platform_bus_type,
++ .probe = retu_probe,
++ .remove = retu_remove,
++};
++
++static struct platform_device retu_device = {
++ .name = "retu",
++ .id = -1,
++ .dev = {
++ .release = retu_device_release,
++ }
++};
++
++/**
++ * retu_init - initialise Retu driver
++ *
++ * Initialise the Retu driver and return 0 if everything worked ok
++ */
++static int __init retu_init(void)
++{
++ int ret = 0;
++
++ printk(KERN_INFO "Retu/Vilma driver initialising\n");
++
++ init_completion(&device_release);
++
++ if ((ret = driver_register(&retu_driver)) < 0)
++ return ret;
++
++ if ((ret = platform_device_register(&retu_device)) < 0) {
++ driver_unregister(&retu_driver);
++ return ret;
++ }
++ return 0;
++}
++
++/*
++ * Cleanup
++ */
++static void __exit retu_exit(void)
++{
++ platform_device_unregister(&retu_device);
++ driver_unregister(&retu_driver);
++ wait_for_completion(&device_release);
++}
++
++EXPORT_SYMBOL(retu_request_irq);
++EXPORT_SYMBOL(retu_free_irq);
++EXPORT_SYMBOL(retu_enable_irq);
++EXPORT_SYMBOL(retu_disable_irq);
++EXPORT_SYMBOL(retu_ack_irq);
++EXPORT_SYMBOL(retu_read_reg);
++EXPORT_SYMBOL(retu_write_reg);
++
++subsys_initcall(retu_init);
++module_exit(retu_exit);
++
++MODULE_DESCRIPTION("Retu ASIC control");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Juha Yrjölä, David Weinehall, and Mikko Ylinen");
+diff --git a/drivers/cbus/retu.h b/drivers/cbus/retu.h
+new file mode 100644
+index 0000000..c9e044c
+--- /dev/null
++++ b/drivers/cbus/retu.h
+@@ -0,0 +1,77 @@
++/**
++ * drivers/cbus/retu.h
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
++ * David Weinehall <david.weinehall@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __DRIVERS_CBUS_RETU_H
++#define __DRIVERS_CBUS_RETU_H
++
++#include <linux/types.h>
++
++/* Registers */
++#define RETU_REG_ASICR 0x00 /* ASIC ID & revision */
++#define RETU_REG_IDR 0x01 /* Interrupt ID */
++#define RETU_REG_IMR 0x02 /* Interrupt mask */
++#define RETU_REG_RTCDSR 0x03 /* RTC seconds register */
++#define RETU_REG_RTCHMR 0x04 /* RTC hours and minutes register */
++#define RETU_REG_RTCHMAR 0x05 /* RTC hours and minutes alarm and time set register */
++#define RETU_REG_RTCCALR 0x06 /* RTC calibration register */
++#define RETU_REG_ADCR 0x08 /* ADC result */
++#define RETU_REG_ADCSCR 0x09 /* ADC sample ctrl */
++#define RETU_REG_CC1 0x0d /* Common control register 1 */
++#define RETU_REG_CC2 0x0e /* Common control register 2 */
++#define RETU_REG_CTRL_CLR 0x0f /* Regulator clear register */
++#define RETU_REG_CTRL_SET 0x10 /* Regulator set register */
++#define RETU_REG_STATUS 0x16 /* Status register */
++#define RETU_REG_WATCHDOG 0x17 /* Watchdog register */
++#define RETU_REG_AUDTXR 0x18 /* Audio Codec Tx register */
++#define RETU_REG_MAX 0x1f
++
++/* Interrupt sources */
++#define RETU_INT_PWR 0
++#define RETU_INT_CHAR 1
++#define RETU_INT_RTCS 2
++#define RETU_INT_RTCM 3
++#define RETU_INT_RTCD 4
++#define RETU_INT_RTCA 5
++#define RETU_INT_HOOK 6
++#define RETU_INT_HEAD 7
++#define RETU_INT_ADCS 8
++
++#define MAX_RETU_IRQ_HANDLERS 16
++
++int retu_read_reg(int reg);
++void retu_write_reg(int reg, u16 val);
++void retu_set_clear_reg_bits(int reg, u16 set, u16 clear);
++int retu_read_adc(int channel);
++int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
++void retu_free_irq(int id);
++void retu_enable_irq(int id);
++void retu_disable_irq(int id);
++void retu_ack_irq(int id);
++
++#ifdef CONFIG_CBUS_RETU_USER
++int retu_user_init(void);
++void retu_user_cleanup(void);
++#endif
++
++extern spinlock_t retu_lock;
++
++#endif /* __DRIVERS_CBUS_RETU_H */
+diff --git a/drivers/cbus/tahvo-usb.c b/drivers/cbus/tahvo-usb.c
+new file mode 100644
+index 0000000..d8ad836
+--- /dev/null
++++ b/drivers/cbus/tahvo-usb.c
+@@ -0,0 +1,777 @@
++/**
++ * drivers/cbus/tahvo-usb.c
++ *
++ * Tahvo USB transeiver
++ *
++ * Copyright (C) 2005-2006 Nokia Corporation
++ *
++ * Parts copied from drivers/i2c/chips/isp1301_omap.c
++ * Copyright (C) 2004 Texas Instruments
++ * Copyright (C) 2004 David Brownell
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
++ * Tony Lindgren <tony@atomide.com>, and
++ * Timo Teräs <timo.teras@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ch9.h>
++#include <linux/usb/gadget.h>
++#include <linux/usb.h>
++#include <linux/usb/otg.h>
++#include <linux/i2c.h>
++#include <linux/workqueue.h>
++#include <linux/kobject.h>
++#include <linux/clk.h>
++#include <linux/mutex.h>
++
++#include <asm/irq.h>
++#include <mach/usb.h>
++
++#include "cbus.h"
++#include "tahvo.h"
++
++#define DRIVER_NAME "tahvo-usb"
++
++#define USBR_SLAVE_CONTROL (1 << 8)
++#define USBR_VPPVIO_SW (1 << 7)
++#define USBR_SPEED (1 << 6)
++#define USBR_REGOUT (1 << 5)
++#define USBR_MASTER_SW2 (1 << 4)
++#define USBR_MASTER_SW1 (1 << 3)
++#define USBR_SLAVE_SW (1 << 2)
++#define USBR_NSUSPEND (1 << 1)
++#define USBR_SEMODE (1 << 0)
++
++/* bits in OTG_CTRL */
++
++/* Bits that are controlled by OMAP OTG and are read-only */
++#define OTG_CTRL_OMAP_MASK (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|\
++ OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
++/* Bits that are controlled by transceiver */
++#define OTG_CTRL_XCVR_MASK (OTG_ASESSVLD|OTG_BSESSEND|\
++ OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
++/* Bits that are controlled by system */
++#define OTG_CTRL_SYS_MASK (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|\
++ OTG_B_HNPEN|OTG_BUSDROP)
++
++#if defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OTG)
++#error tahvo-otg.c does not work with OCHI yet!
++#endif
++
++#define TAHVO_MODE_HOST 0
++#define TAHVO_MODE_PERIPHERAL 1
++
++#ifdef CONFIG_USB_OTG
++#define TAHVO_MODE(tu) (tu)->tahvo_mode
++#elif defined(CONFIG_USB_GADGET_OMAP)
++#define TAHVO_MODE(tu) TAHVO_MODE_PERIPHERAL
++#else
++#define TAHVO_MODE(tu) TAHVO_MODE_HOST
++#endif
++
++struct tahvo_usb {
++ struct platform_device *pt_dev;
++ struct otg_transceiver otg;
++ int vbus_state;
++ struct work_struct irq_work;
++ struct mutex serialize;
++#ifdef CONFIG_USB_OTG
++ int tahvo_mode;
++#endif
++};
++static struct platform_device tahvo_usb_device;
++
++/*
++ * ---------------------------------------------------------------------------
++ * OTG related functions
++ *
++ * These shoud be separated into omap-otg.c driver module, as they are used
++ * by various transceivers. These functions are needed in the UDC-only case
++ * as well. These functions are copied from GPL isp1301_omap.c
++ * ---------------------------------------------------------------------------
++ */
++static struct platform_device *tahvo_otg_dev;
++
++static irqreturn_t omap_otg_irq(int irq, void *arg)
++{
++ struct platform_device *otg_dev = (struct platform_device *) arg;
++ struct tahvo_usb *tu = (struct tahvo_usb *) otg_dev->dev.driver_data;
++ u16 otg_irq;
++
++ otg_irq = omap_readw(OTG_IRQ_SRC);
++ if (otg_irq & OPRT_CHG) {
++ omap_writew(OPRT_CHG, OTG_IRQ_SRC);
++ } else if (otg_irq & B_SRP_TMROUT) {
++ omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
++ } else if (otg_irq & B_HNP_FAIL) {
++ omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
++ } else if (otg_irq & A_SRP_DETECT) {
++ omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
++ } else if (otg_irq & A_REQ_TMROUT) {
++ omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
++ } else if (otg_irq & A_VBUS_ERR) {
++ omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
++ } else if (otg_irq & DRIVER_SWITCH) {
++ if ((!(omap_readl(OTG_CTRL) & OTG_DRIVER_SEL)) &&
++ tu->otg.host && tu->otg.state == OTG_STATE_A_HOST) {
++ /* role is host */
++ usb_bus_start_enum(tu->otg.host,
++ tu->otg.host->otg_port);
++ }
++ omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
++ } else
++ return IRQ_NONE;
++
++ return IRQ_HANDLED;
++
++}
++
++static int omap_otg_init(void)
++{
++ u32 l;
++
++#ifdef CONFIG_USB_OTG
++ if (!tahvo_otg_dev) {
++ printk("tahvo-usb: no tahvo_otg_dev\n");
++ return -ENODEV;
++ }
++#endif
++
++ l = omap_readl(OTG_SYSCON_1);
++ l &= ~OTG_IDLE_EN;
++ omap_writel(l, OTG_SYSCON_1);
++ udelay(100);
++
++ /* some of these values are board-specific... */
++ l = omap_readl(OTG_SYSCON_2);
++ l |= OTG_EN
++ /* for B-device: */
++ | SRP_GPDATA /* 9msec Bdev D+ pulse */
++ | SRP_GPDVBUS /* discharge after VBUS pulse */
++ // | (3 << 24) /* 2msec VBUS pulse */
++ /* for A-device: */
++ | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */
++ | SRP_DPW /* detect 167+ns SRP pulses */
++ | SRP_DATA | SRP_VBUS; /* accept both kinds of SRP pulse */
++ omap_writel(l, OTG_SYSCON_2);
++
++ omap_writew(DRIVER_SWITCH | OPRT_CHG
++ | B_SRP_TMROUT | B_HNP_FAIL
++ | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT,
++ OTG_IRQ_EN);
++ l = omap_readl(OTG_SYSCON_2);
++ l |= OTG_EN;
++ omap_writel(l, OTG_SYSCON_2);
++
++ return 0;
++}
++
++static int omap_otg_probe(struct device *dev)
++{
++ int ret;
++
++ tahvo_otg_dev = to_platform_device(dev);
++ ret = omap_otg_init();
++ if (ret != 0) {
++ printk(KERN_ERR "tahvo-usb: omap_otg_init failed\n");
++ return ret;
++ }
++
++ return request_irq(tahvo_otg_dev->resource[1].start,
++ omap_otg_irq, IRQF_DISABLED, DRIVER_NAME,
++ &tahvo_usb_device);
++}
++
++static int omap_otg_remove(struct device *dev)
++{
++ free_irq(tahvo_otg_dev->resource[1].start, &tahvo_usb_device);
++ tahvo_otg_dev = NULL;
++
++ return 0;
++}
++
++struct device_driver omap_otg_driver = {
++ .name = "omap_otg",
++ .bus = &platform_bus_type,
++ .probe = omap_otg_probe,
++ .remove = omap_otg_remove,
++};
++
++/*
++ * ---------------------------------------------------------------------------
++ * Tahvo related functions
++ * These are Nokia proprietary code, except for the OTG register settings,
++ * which are copied from isp1301.c
++ * ---------------------------------------------------------------------------
++ */
++static ssize_t vbus_state_show(struct device *device,
++ struct device_attribute *attr, char *buf)
++{
++ struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data;
++ return sprintf(buf, "%d\n", tu->vbus_state);
++}
++static DEVICE_ATTR(vbus_state, 0444, vbus_state_show, NULL);
++
++int vbus_active = 0;
++
++#if 0
++
++static int host_suspend(struct tahvo_usb *tu)
++{
++ struct device *dev;
++
++ if (!tu->otg.host)
++ return -ENODEV;
++
++ /* Currently ASSUMES only the OTG port matters;
++ * other ports could be active...
++ */
++ dev = tu->otg.host->controller;
++ return dev->driver->suspend(dev, PMSG_SUSPEND);
++}
++
++static int host_resume(struct tahvo_usb *tu)
++{
++ struct device *dev;
++
++ if (!tu->otg.host)
++ return -ENODEV;
++
++ dev = tu->otg.host->controller;
++ return dev->driver->resume(dev);
++}
++
++#else
++
++static int host_suspend(struct tahvo_usb *tu)
++{
++ return 0;
++}
++
++static int host_resume(struct tahvo_usb *tu)
++{
++ return 0;
++}
++
++#endif
++
++static void check_vbus_state(struct tahvo_usb *tu)
++{
++ int reg, prev_state;
++
++ reg = tahvo_read_reg(TAHVO_REG_IDSR);
++ if (reg & 0x01) {
++ u32 l;
++
++ vbus_active = 1;
++ switch (tu->otg.state) {
++ case OTG_STATE_B_IDLE:
++ /* Enable the gadget driver */
++ if (tu->otg.gadget)
++ usb_gadget_vbus_connect(tu->otg.gadget);
++ /* Set B-session valid and not B-sessio ended to indicate
++ * Vbus to be ok. */
++ l = omap_readl(OTG_CTRL);
++ l &= ~OTG_BSESSEND;
++ l |= OTG_BSESSVLD;
++ omap_writel(l, OTG_CTRL);
++
++ tu->otg.state = OTG_STATE_B_PERIPHERAL;
++ break;
++ case OTG_STATE_A_IDLE:
++ /* Session is now valid assuming the USB hub is driving Vbus */
++ tu->otg.state = OTG_STATE_A_HOST;
++ host_resume(tu);
++ break;
++ default:
++ break;
++ }
++ printk("USB cable connected\n");
++ } else {
++ switch (tu->otg.state) {
++ case OTG_STATE_B_PERIPHERAL:
++ if (tu->otg.gadget)
++ usb_gadget_vbus_disconnect(tu->otg.gadget);
++ tu->otg.state = OTG_STATE_B_IDLE;
++ break;
++ case OTG_STATE_A_HOST:
++ tu->otg.state = OTG_STATE_A_IDLE;
++ break;
++ default:
++ break;
++ }
++ printk("USB cable disconnected\n");
++ vbus_active = 0;
++ }
++
++ prev_state = tu->vbus_state;
++ tu->vbus_state = reg & 0x01;
++ if (prev_state != tu->vbus_state)
++ sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
++}
++
++static void tahvo_usb_become_host(struct tahvo_usb *tu)
++{
++ u32 l;
++
++ /* Clear system and transceiver controlled bits
++ * also mark the A-session is always valid */
++ omap_otg_init();
++
++ l = omap_readl(OTG_CTRL);
++ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK);
++ l |= OTG_ASESSVLD;
++ omap_writel(l, OTG_CTRL);
++
++ /* Power up the transceiver in USB host mode */
++ tahvo_write_reg(TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
++ USBR_MASTER_SW2 | USBR_MASTER_SW1);
++ tu->otg.state = OTG_STATE_A_IDLE;
++
++ check_vbus_state(tu);
++}
++
++static void tahvo_usb_stop_host(struct tahvo_usb *tu)
++{
++ host_suspend(tu);
++ tu->otg.state = OTG_STATE_A_IDLE;
++}
++
++static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
++{
++ u32 l;
++
++ /* Clear system and transceiver controlled bits
++ * and enable ID to mark peripheral mode and
++ * BSESSEND to mark no Vbus */
++ omap_otg_init();
++ l = omap_readl(OTG_CTRL);
++ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
++ l |= OTG_ID | OTG_BSESSEND;
++ omap_writel(l, OTG_CTRL);
++
++ /* Power up transceiver and set it in USB perhiperal mode */
++ tahvo_write_reg(TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT | USBR_NSUSPEND | USBR_SLAVE_SW);
++ tu->otg.state = OTG_STATE_B_IDLE;
++
++ check_vbus_state(tu);
++}
++
++static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
++{
++ u32 l;
++
++ l = omap_readl(OTG_CTRL);
++ l &= ~OTG_BSESSVLD;
++ l |= OTG_BSESSEND;
++ omap_writel(l, OTG_CTRL);
++
++ if (tu->otg.gadget)
++ usb_gadget_vbus_disconnect(tu->otg.gadget);
++ tu->otg.state = OTG_STATE_B_IDLE;
++
++}
++
++static void tahvo_usb_power_off(struct tahvo_usb *tu)
++{
++ u32 l;
++ int id;
++
++ /* Disable gadget controller if any */
++ if (tu->otg.gadget)
++ usb_gadget_vbus_disconnect(tu->otg.gadget);
++
++ host_suspend(tu);
++
++ /* Disable OTG and interrupts */
++ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
++ id = OTG_ID;
++ else
++ id = 0;
++ l = omap_readl(OTG_CTRL);
++ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
++ l |= id | OTG_BSESSEND;
++ omap_writel(l, OTG_CTRL);
++ omap_writew(0, OTG_IRQ_EN);
++
++ l = omap_readl(OTG_SYSCON_2);
++ l &= ~OTG_EN;
++ omap_writel(l, OTG_SYSCON_2);
++
++ l = omap_readl(OTG_SYSCON_1);
++ l |= OTG_IDLE_EN;
++ omap_writel(l, OTG_SYSCON_1);
++
++ /* Power off transceiver */
++ tahvo_write_reg(TAHVO_REG_USBR, 0);
++ tu->otg.state = OTG_STATE_UNDEFINED;
++}
++
++
++static int tahvo_usb_set_power(struct otg_transceiver *dev, unsigned mA)
++{
++ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
++
++ dev_dbg(&tu->pt_dev->dev, "set_power %d mA\n", mA);
++
++ if (dev->state == OTG_STATE_B_PERIPHERAL) {
++ /* REVISIT: Can Tahvo charge battery from VBUS? */
++ }
++ return 0;
++}
++
++static int tahvo_usb_set_suspend(struct otg_transceiver *dev, int suspend)
++{
++ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
++ u16 w;
++
++ dev_dbg(&tu->pt_dev->dev, "set_suspend\n");
++
++ w = tahvo_read_reg(TAHVO_REG_USBR);
++ if (suspend)
++ w &= ~USBR_NSUSPEND;
++ else
++ w |= USBR_NSUSPEND;
++ tahvo_write_reg(TAHVO_REG_USBR, w);
++
++ return 0;
++}
++
++static int tahvo_usb_start_srp(struct otg_transceiver *dev)
++{
++ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
++ u32 otg_ctrl;
++
++ dev_dbg(&tu->pt_dev->dev, "start_srp\n");
++
++ if (!dev || tu->otg.state != OTG_STATE_B_IDLE)
++ return -ENODEV;
++
++ otg_ctrl = omap_readl(OTG_CTRL);
++ if (!(otg_ctrl & OTG_BSESSEND))
++ return -EINVAL;
++
++ otg_ctrl |= OTG_B_BUSREQ;
++ otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_SYS_MASK;
++ omap_writel(otg_ctrl, OTG_CTRL);
++ tu->otg.state = OTG_STATE_B_SRP_INIT;
++
++ return 0;
++}
++
++static int tahvo_usb_start_hnp(struct otg_transceiver *otg)
++{
++ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
++
++ dev_dbg(&tu->pt_dev->dev, "start_hnp\n");
++#ifdef CONFIG_USB_OTG
++ /* REVISIT: Add this for OTG */
++#endif
++ return -EINVAL;
++}
++
++static int tahvo_usb_set_host(struct otg_transceiver *otg, struct usb_bus *host)
++{
++ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
++ u32 l;
++
++ dev_dbg(&tu->pt_dev->dev, "set_host %p\n", host);
++
++ if (otg == NULL)
++ return -ENODEV;
++
++#if defined(CONFIG_USB_OTG) || !defined(CONFIG_USB_GADGET_OMAP)
++
++ mutex_lock(&tu->serialize);
++
++ if (host == NULL) {
++ if (TAHVO_MODE(tu) == TAHVO_MODE_HOST)
++ tahvo_usb_power_off(tu);
++ tu->otg.host = NULL;
++ mutex_unlock(&tu->serialize);
++ return 0;
++ }
++
++ l = omap_readl(OTG_SYSCON_1);
++ l &= ~(OTG_IDLE_EN | HST_IDLE_EN | DEV_IDLE_EN);
++ omap_writel(l, OTG_SYSCON_1);
++
++ if (TAHVO_MODE(tu) == TAHVO_MODE_HOST) {
++ tu->otg.host = NULL;
++ tahvo_usb_become_host(tu);
++ } else
++ host_suspend(tu);
++
++ tu->otg.host = host;
++
++ mutex_unlock(&tu->serialize);
++#else
++ /* No host mode configured, so do not allow host controlled to be set */
++ return -EINVAL;
++#endif
++
++ return 0;
++}
++
++static int tahvo_usb_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
++{
++ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
++
++ dev_dbg(&tu->pt_dev->dev, "set_peripheral %p\n", gadget);
++
++ if (!otg)
++ return -ENODEV;
++
++#if defined(CONFIG_USB_OTG) || defined(CONFIG_USB_GADGET_OMAP)
++
++ mutex_lock(&tu->serialize);
++
++ if (!gadget) {
++ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
++ tahvo_usb_power_off(tu);
++ tu->otg.gadget = NULL;
++ mutex_unlock(&tu->serialize);
++ return 0;
++ }
++
++ tu->otg.gadget = gadget;
++ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
++ tahvo_usb_become_peripheral(tu);
++
++ mutex_unlock(&tu->serialize);
++#else
++ /* No gadget mode configured, so do not allow host controlled to be set */
++ return -EINVAL;
++#endif
++
++ return 0;
++}
++
++static void tahvo_usb_irq_work(struct work_struct *work)
++{
++ struct tahvo_usb *tu = container_of(work, struct tahvo_usb, irq_work);
++
++ mutex_lock(&tu->serialize);
++ check_vbus_state(tu);
++ mutex_unlock(&tu->serialize);
++}
++
++static void tahvo_usb_vbus_interrupt(unsigned long arg)
++{
++ struct tahvo_usb *tu = (struct tahvo_usb *) arg;
++
++ tahvo_ack_irq(TAHVO_INT_VBUSON);
++ /* Seems we need this to acknowledge the interrupt */
++ tahvo_read_reg(TAHVO_REG_IDSR);
++ schedule_work(&tu->irq_work);
++}
++
++#ifdef CONFIG_USB_OTG
++static ssize_t otg_mode_show(struct device *device,
++ struct device_attribute *attr, char *buf)
++{
++ struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data;
++ switch (tu->tahvo_mode) {
++ case TAHVO_MODE_HOST:
++ return sprintf(buf, "host\n");
++ case TAHVO_MODE_PERIPHERAL:
++ return sprintf(buf, "peripheral\n");
++ }
++ return sprintf(buf, "unknown\n");
++}
++
++static ssize_t otg_mode_store(struct device *device,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data;
++ int r;
++
++ r = strlen(buf);
++ mutex_lock(&tu->serialize);
++ if (strncmp(buf, "host", 4) == 0) {
++ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
++ tahvo_usb_stop_peripheral(tu);
++ tu->tahvo_mode = TAHVO_MODE_HOST;
++ if (tu->otg.host) {
++ printk(KERN_INFO "Selected HOST mode: host controller present.\n");
++ tahvo_usb_become_host(tu);
++ } else {
++ printk(KERN_INFO "Selected HOST mode: no host controller, powering off.\n");
++ tahvo_usb_power_off(tu);
++ }
++ } else if (strncmp(buf, "peripheral", 10) == 0) {
++ if (tu->tahvo_mode == TAHVO_MODE_HOST)
++ tahvo_usb_stop_host(tu);
++ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
++ if (tu->otg.gadget) {
++ printk(KERN_INFO "Selected PERIPHERAL mode: gadget driver present.\n");
++ tahvo_usb_become_peripheral(tu);
++ } else {
++ printk(KERN_INFO "Selected PERIPHERAL mode: no gadget driver, powering off.\n");
++ tahvo_usb_power_off(tu);
++ }
++ } else
++ r = -EINVAL;
++
++ mutex_unlock(&tu->serialize);
++ return r;
++}
++
++static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store);
++#endif
++
++static int tahvo_usb_probe(struct device *dev)
++{
++ struct tahvo_usb *tu;
++ int ret;
++
++ dev_dbg(dev, "probe\n");
++
++ /* Create driver data */
++ tu = kmalloc(sizeof(*tu), GFP_KERNEL);
++ if (!tu)
++ return -ENOMEM;
++ memset(tu, 0, sizeof(*tu));
++ tu->pt_dev = container_of(dev, struct platform_device, dev);
++#ifdef CONFIG_USB_OTG
++ /* Default mode */
++#ifdef CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT
++ tu->tahvo_mode = TAHVO_MODE_HOST;
++#else
++ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
++#endif
++#endif
++
++ INIT_WORK(&tu->irq_work, tahvo_usb_irq_work);
++ mutex_init(&tu->serialize);
++
++ /* Set initial state, so that we generate kevents only on
++ * state changes */
++ tu->vbus_state = tahvo_read_reg(TAHVO_REG_IDSR) & 0x01;
++
++ /* We cannot enable interrupt until omap_udc is initialized */
++ ret = tahvo_request_irq(TAHVO_INT_VBUSON, tahvo_usb_vbus_interrupt,
++ (unsigned long) tu, "vbus_interrupt");
++ if (ret != 0) {
++ kfree(tu);
++ printk(KERN_ERR "Could not register Tahvo interrupt for VBUS\n");
++ return ret;
++ }
++
++ /* Attributes */
++ ret = device_create_file(dev, &dev_attr_vbus_state);
++#ifdef CONFIG_USB_OTG
++ ret |= device_create_file(dev, &dev_attr_otg_mode);
++#endif
++ if (ret)
++ printk(KERN_ERR "attribute creation failed: %d\n", ret);
++
++ /* Create OTG interface */
++ tahvo_usb_power_off(tu);
++ tu->otg.state = OTG_STATE_UNDEFINED;
++ tu->otg.label = DRIVER_NAME;
++ tu->otg.set_host = tahvo_usb_set_host;
++ tu->otg.set_peripheral = tahvo_usb_set_peripheral;
++ tu->otg.set_power = tahvo_usb_set_power;
++ tu->otg.set_suspend = tahvo_usb_set_suspend;
++ tu->otg.start_srp = tahvo_usb_start_srp;
++ tu->otg.start_hnp = tahvo_usb_start_hnp;
++
++ ret = otg_set_transceiver(&tu->otg);
++ if (ret < 0) {
++ printk(KERN_ERR "Cannot register USB transceiver\n");
++ kfree(tu);
++ tahvo_free_irq(TAHVO_INT_VBUSON);
++ return ret;
++ }
++
++ dev->driver_data = tu;
++
++ /* Act upon current vbus state once at startup. A vbus state irq may or
++ * may not be generated in addition to this. */
++ schedule_work(&tu->irq_work);
++ return 0;
++}
++
++static int tahvo_usb_remove(struct device *dev)
++{
++ dev_dbg(dev, "remove\n");
++
++ tahvo_free_irq(TAHVO_INT_VBUSON);
++ flush_scheduled_work();
++ otg_set_transceiver(0);
++ device_remove_file(dev, &dev_attr_vbus_state);
++#ifdef CONFIG_USB_OTG
++ device_remove_file(dev, &dev_attr_otg_mode);
++#endif
++ return 0;
++}
++
++static struct device_driver tahvo_usb_driver = {
++ .name = "tahvo-usb",
++ .bus = &platform_bus_type,
++ .probe = tahvo_usb_probe,
++ .remove = tahvo_usb_remove,
++};
++
++static struct platform_device tahvo_usb_device = {
++ .name = "tahvo-usb",
++ .id = -1,
++};
++
++static int __init tahvo_usb_init(void)
++{
++ int ret = 0;
++
++ printk(KERN_INFO "Tahvo USB transceiver driver initializing\n");
++ ret = driver_register(&tahvo_usb_driver);
++ if (ret)
++ return ret;
++ ret = platform_device_register(&tahvo_usb_device);
++ if (ret < 0) {
++ driver_unregister(&tahvo_usb_driver);
++ return ret;
++ }
++ ret = driver_register(&omap_otg_driver);
++ if (ret) {
++ platform_device_unregister(&tahvo_usb_device);
++ driver_unregister(&tahvo_usb_driver);
++ return ret;
++ }
++ return 0;
++}
++
++subsys_initcall(tahvo_usb_init);
++
++static void __exit tahvo_usb_exit(void)
++{
++ driver_unregister(&omap_otg_driver);
++ platform_device_unregister(&tahvo_usb_device);
++ driver_unregister(&tahvo_usb_driver);
++}
++module_exit(tahvo_usb_exit);
++
++MODULE_DESCRIPTION("Tahvo USB OTG Transceiver Driver");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs");
+diff --git a/drivers/cbus/tahvo-user.c b/drivers/cbus/tahvo-user.c
+new file mode 100644
+index 0000000..873d648
+--- /dev/null
++++ b/drivers/cbus/tahvo-user.c
+@@ -0,0 +1,405 @@
++/**
++ * drivers/cbus/tahvo-user.c
++ *
++ * Tahvo user space interface functions
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/poll.h>
++#include <linux/list.h>
++#include <linux/spinlock.h>
++#include <linux/mutex.h>
++
++#include <asm/uaccess.h>
++
++#include "tahvo.h"
++
++#include "user_retu_tahvo.h"
++
++/* Maximum size of IRQ node buffer/pool */
++#define TAHVO_MAX_IRQ_BUF_LEN 16
++
++#define PFX "tahvo-user: "
++
++/* Bitmap for marking the interrupt sources as having the handlers */
++static u32 tahvo_irq_bits;
++
++/* For allowing only one user process to subscribe to the tahvo interrupts */
++static struct file *tahvo_irq_subscr = NULL;
++
++/* For poll and IRQ passing */
++struct tahvo_irq {
++ u32 id;
++ struct list_head node;
++};
++
++static spinlock_t tahvo_irqs_lock;
++static struct tahvo_irq *tahvo_irq_block;
++static LIST_HEAD(tahvo_irqs);
++static LIST_HEAD(tahvo_irqs_reserve);
++
++/* Wait queue - used when user wants to read the device */
++DECLARE_WAIT_QUEUE_HEAD(tahvo_user_waitqueue);
++
++/* Semaphore to protect irq subscription sequence */
++static struct mutex tahvo_mutex;
++
++/* This array specifies TAHVO register types (read/write/toggle) */
++static const u8 tahvo_access_bits[] = {
++ 1,
++ 4,
++ 1,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 3,
++ 1
++};
++
++/*
++ * The handler for all TAHVO interrupts.
++ *
++ * arg is the interrupt source in TAHVO.
++ */
++static void tahvo_user_irq_handler(unsigned long arg)
++{
++ struct tahvo_irq *irq;
++
++ /* user has to re-enable the interrupt once ready
++ * for receiving them again */
++ tahvo_disable_irq(arg);
++ tahvo_ack_irq(arg);
++
++ spin_lock(&tahvo_irqs_lock);
++ if (list_empty(&tahvo_irqs_reserve)) {
++ spin_unlock(&tahvo_irqs_lock);
++ return;
++ }
++ irq = list_entry((&tahvo_irqs_reserve)->next, struct tahvo_irq, node);
++ irq->id = arg;
++ list_move_tail(&irq->node, &tahvo_irqs);
++ spin_unlock(&tahvo_irqs_lock);
++
++ /* wake up waiting thread */
++ wake_up(&tahvo_user_waitqueue);
++}
++
++/*
++ * This routine sets up the interrupt handler and marks an interrupt source
++ * in TAHVO as a candidate for signal delivery to the user process.
++ */
++static int tahvo_user_subscribe_to_irq(int id, struct file *filp)
++{
++ int ret;
++
++ mutex_lock(&tahvo_mutex);
++ if ((tahvo_irq_subscr != NULL) && (tahvo_irq_subscr != filp)) {
++ mutex_unlock(&tahvo_mutex);
++ return -EBUSY;
++ }
++ /* Store the file pointer of the first user process registering IRQs */
++ tahvo_irq_subscr = filp;
++ mutex_unlock(&tahvo_mutex);
++
++ if (tahvo_irq_bits & (1 << id))
++ return 0;
++
++ ret = tahvo_request_irq(id, tahvo_user_irq_handler, id, "");
++ if (ret < 0)
++ return ret;
++
++ /* Mark that this interrupt has a handler */
++ tahvo_irq_bits |= 1 << id;
++
++ return 0;
++}
++
++/*
++ * Unregister all TAHVO interrupt handlers
++ */
++static void tahvo_unreg_irq_handlers(void)
++{
++ int id;
++
++ if (!tahvo_irq_bits)
++ return;
++
++ for (id = 0; id < MAX_TAHVO_IRQ_HANDLERS; id++)
++ if (tahvo_irq_bits & (1 << id))
++ tahvo_free_irq(id);
++
++ tahvo_irq_bits = 0;
++}
++
++/*
++ * Write to TAHVO register.
++ * Returns 0 upon success, a negative error value otherwise.
++ */
++static int tahvo_user_write_with_mask(u32 field, u16 value)
++{
++ u32 mask;
++ u32 reg;
++ u_short tmp;
++ unsigned long flags;
++
++ mask = MASK(field);
++ reg = REG(field);
++
++ /* Detect bad mask and reg */
++ if (mask == 0 || reg > TAHVO_REG_MAX ||
++ tahvo_access_bits[reg] == READ_ONLY) {
++ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
++ reg, mask);
++ return -EINVAL;
++ }
++
++ /* Justify value according to mask */
++ while (!(mask & 1)) {
++ value = value << 1;
++ mask = mask >> 1;
++ }
++
++ spin_lock_irqsave(&tahvo_lock, flags);
++ if (tahvo_access_bits[reg] == TOGGLE) {
++ /* No need to detect previous content of register */
++ tmp = 0;
++ } else {
++ /* Read current value of register */
++ tmp = tahvo_read_reg(reg);
++ }
++ /* Generate a new value */
++ tmp = (tmp & ~MASK(field)) | (value & MASK(field));
++ /* Write data to TAHVO */
++ tahvo_write_reg(reg, tmp);
++ spin_unlock_irqrestore(&tahvo_lock, flags);
++
++ return 0;
++}
++
++/*
++ * Read TAHVO register.
++ */
++static u32 tahvo_user_read_with_mask(u32 field)
++{
++ u_short value;
++ u32 mask, reg;
++
++ mask = MASK(field);
++ reg = REG(field);
++
++ /* Detect bad mask and reg */
++ if (mask == 0 || reg > TAHVO_REG_MAX) {
++ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
++ reg, mask);
++ return -EINVAL;
++ }
++
++ /* Read the register */
++ value = tahvo_read_reg(reg) & mask;
++
++ /* Right justify value */
++ while (!(mask & 1)) {
++ value = value >> 1;
++ mask = mask >> 1;
++ }
++
++ return value;
++}
++
++/*
++ * Close device
++ */
++static int tahvo_close(struct inode *inode, struct file *filp)
++{
++ /* Unregister all interrupts that have been registered */
++ if (tahvo_irq_subscr == filp) {
++ tahvo_unreg_irq_handlers();
++ tahvo_irq_subscr = NULL;
++ }
++
++ return 0;
++}
++
++/*
++ * Device control (ioctl)
++ */
++static int tahvo_ioctl(struct inode *inode, struct file *filp,
++ unsigned int cmd, unsigned long arg)
++{
++ struct retu_tahvo_write_parms par;
++ int ret;
++
++ switch (cmd) {
++ case URT_IOCT_IRQ_SUBSCR:
++ return tahvo_user_subscribe_to_irq(arg, filp);
++ case TAHVO_IOCH_READ:
++ return tahvo_user_read_with_mask(arg);
++ case TAHVO_IOCX_WRITE:
++ ret = copy_from_user(&par, (void __user *) arg, sizeof(par));
++ if (ret)
++ printk(KERN_ERR "copy_from_user failed: %d\n", ret);
++ par.result = tahvo_user_write_with_mask(par.field, par.value);
++ ret = copy_to_user((void __user *) arg, &par, sizeof(par));
++ if (ret)
++ printk(KERN_ERR "copy_to_user failed: %d\n", ret);
++ break;
++ default:
++ return -ENOIOCTLCMD;
++ }
++ return 0;
++}
++
++/*
++ * Read from device
++ */
++static ssize_t tahvo_read(struct file *filp, char *buf, size_t count,
++ loff_t * offp)
++{
++ struct tahvo_irq *irq;
++
++ u32 nr, i;
++
++ /* read not permitted if neither filp nor anyone has registered IRQs */
++ if (tahvo_irq_subscr != filp)
++ return -EPERM;
++
++ if ((count < sizeof(u32)) || ((count % sizeof(u32)) != 0))
++ return -EINVAL;
++
++ nr = count / sizeof(u32);
++
++ for (i = 0; i < nr; i++) {
++ unsigned long flags;
++ u32 irq_id;
++ int ret;
++
++ ret = wait_event_interruptible(tahvo_user_waitqueue,
++ !list_empty(&tahvo_irqs));
++ if (ret < 0)
++ return ret;
++
++ spin_lock_irqsave(&tahvo_irqs_lock, flags);
++ irq = list_entry((&tahvo_irqs)->next, struct tahvo_irq, node);
++ irq_id = irq->id;
++ list_move(&irq->node, &tahvo_irqs_reserve);
++ spin_unlock_irqrestore(&tahvo_irqs_lock, flags);
++
++ ret = copy_to_user(buf + i * sizeof(irq_id), &irq_id,
++ sizeof(irq_id));
++ if (ret)
++ printk(KERN_ERR "copy_to_user failed: %d\n", ret);
++ }
++
++ return count;
++}
++
++/*
++ * Poll method
++ */
++static unsigned tahvo_poll(struct file *filp, struct poll_table_struct *pt)
++{
++ if (!list_empty(&tahvo_irqs))
++ return POLLIN;
++
++ poll_wait(filp, &tahvo_user_waitqueue, pt);
++
++ if (!list_empty(&tahvo_irqs))
++ return POLLIN;
++ else
++ return 0;
++}
++
++static struct file_operations tahvo_user_fileops = {
++ .owner = THIS_MODULE,
++ .ioctl = tahvo_ioctl,
++ .read = tahvo_read,
++ .release = tahvo_close,
++ .poll = tahvo_poll
++};
++
++static struct miscdevice tahvo_device = {
++ .minor = MISC_DYNAMIC_MINOR,
++ .name = "tahvo",
++ .fops = &tahvo_user_fileops
++};
++
++/*
++ * Initialization
++ *
++ * @return 0 if successful, error value otherwise.
++ */
++int tahvo_user_init(void)
++{
++ struct tahvo_irq *irq;
++ int res, i;
++
++ irq = kmalloc(sizeof(*irq) * TAHVO_MAX_IRQ_BUF_LEN, GFP_KERNEL);
++ if (irq == NULL) {
++ printk(KERN_ERR PFX "kmalloc failed\n");
++ return -ENOMEM;
++ }
++ memset(irq, 0, sizeof(*irq) * TAHVO_MAX_IRQ_BUF_LEN);
++ for (i = 0; i < TAHVO_MAX_IRQ_BUF_LEN; i++)
++ list_add(&irq[i].node, &tahvo_irqs_reserve);
++
++ tahvo_irq_block = irq;
++
++ spin_lock_init(&tahvo_irqs_lock);
++ mutex_init(&tahvo_mutex);
++
++ /* Request a misc device */
++ res = misc_register(&tahvo_device);
++ if (res < 0) {
++ printk(KERN_ERR PFX "unable to register misc device for %s\n",
++ tahvo_device.name);
++ kfree(irq);
++ return res;
++ }
++
++ return 0;
++}
++
++/*
++ * Cleanup.
++ */
++void tahvo_user_cleanup(void)
++{
++ /* Unregister our misc device */
++ misc_deregister(&tahvo_device);
++ /* Unregister and disable all TAHVO interrupts */
++ tahvo_unreg_irq_handlers();
++ kfree(tahvo_irq_block);
++}
++
++MODULE_DESCRIPTION("Tahvo ASIC user space functions");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Mikko Ylinen");
+diff --git a/drivers/cbus/tahvo.c b/drivers/cbus/tahvo.c
+new file mode 100644
+index 0000000..e734c4c
+--- /dev/null
++++ b/drivers/cbus/tahvo.c
+@@ -0,0 +1,442 @@
++/**
++ * drivers/cbus/tahvo.c
++ *
++ * Support functions for Tahvo ASIC
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
++ * David Weinehall <david.weinehall@nokia.com>, and
++ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/device.h>
++#include <linux/miscdevice.h>
++#include <linux/poll.h>
++#include <linux/fs.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#include <asm/uaccess.h>
++
++#include <mach/mux.h>
++#include <mach/board.h>
++#include <mach/board-nokia.h>
++
++#include "cbus.h"
++#include "tahvo.h"
++
++#define TAHVO_ID 0x02
++#define PFX "tahvo: "
++
++static int tahvo_initialized;
++static int tahvo_irq_pin;
++static int tahvo_is_betty;
++
++static struct tasklet_struct tahvo_tasklet;
++spinlock_t tahvo_lock = SPIN_LOCK_UNLOCKED;
++
++static struct completion device_release;
++
++struct tahvo_irq_handler_desc {
++ int (*func)(unsigned long);
++ unsigned long arg;
++ char name[8];
++};
++
++static struct tahvo_irq_handler_desc tahvo_irq_handlers[MAX_TAHVO_IRQ_HANDLERS];
++
++/**
++ * tahvo_read_reg - Read a value from a register in Tahvo
++ * @reg: the register to read from
++ *
++ * This function returns the contents of the specified register
++ */
++int tahvo_read_reg(int reg)
++{
++ BUG_ON(!tahvo_initialized);
++ return cbus_read_reg(cbus_host, TAHVO_ID, reg);
++}
++
++/**
++ * tahvo_write_reg - Write a value to a register in Tahvo
++ * @reg: the register to write to
++ * @reg: the value to write to the register
++ *
++ * This function writes a value to the specified register
++ */
++void tahvo_write_reg(int reg, u16 val)
++{
++ BUG_ON(!tahvo_initialized);
++ cbus_write_reg(cbus_host, TAHVO_ID, reg, val);
++}
++
++/**
++ * tahvo_set_clear_reg_bits - set and clear register bits atomically
++ * @reg: the register to write to
++ * @bits: the bits to set
++ *
++ * This function sets and clears the specified Tahvo register bits atomically
++ */
++void tahvo_set_clear_reg_bits(int reg, u16 set, u16 clear)
++{
++ unsigned long flags;
++ u16 w;
++
++ spin_lock_irqsave(&tahvo_lock, flags);
++ w = tahvo_read_reg(reg);
++ w &= ~clear;
++ w |= set;
++ tahvo_write_reg(reg, w);
++ spin_unlock_irqrestore(&tahvo_lock, flags);
++}
++
++/*
++ * Disable given TAHVO interrupt
++ */
++void tahvo_disable_irq(int id)
++{
++ unsigned long flags;
++ u16 mask;
++
++ spin_lock_irqsave(&tahvo_lock, flags);
++ mask = tahvo_read_reg(TAHVO_REG_IMR);
++ mask |= 1 << id;
++ tahvo_write_reg(TAHVO_REG_IMR, mask);
++ spin_unlock_irqrestore(&tahvo_lock, flags);
++}
++
++/*
++ * Enable given TAHVO interrupt
++ */
++void tahvo_enable_irq(int id)
++{
++ unsigned long flags;
++ u16 mask;
++
++ spin_lock_irqsave(&tahvo_lock, flags);
++ mask = tahvo_read_reg(TAHVO_REG_IMR);
++ mask &= ~(1 << id);
++ tahvo_write_reg(TAHVO_REG_IMR, mask);
++ spin_unlock_irqrestore(&tahvo_lock, flags);
++}
++
++/*
++ * Acknowledge given TAHVO interrupt
++ */
++void tahvo_ack_irq(int id)
++{
++ tahvo_write_reg(TAHVO_REG_IDR, 1 << id);
++}
++
++static int tahvo_7bit_backlight;
++
++int tahvo_get_backlight_level(void)
++{
++ int mask;
++
++ if (tahvo_7bit_backlight)
++ mask = 0x7f;
++ else
++ mask = 0x0f;
++ return tahvo_read_reg(TAHVO_REG_LEDPWMR) & mask;
++}
++
++int tahvo_get_max_backlight_level(void)
++{
++ if (tahvo_7bit_backlight)
++ return 0x7f;
++ else
++ return 0x0f;
++}
++
++void tahvo_set_backlight_level(int level)
++{
++ int max_level;
++
++ max_level = tahvo_get_max_backlight_level();
++ if (level > max_level)
++ level = max_level;
++ tahvo_write_reg(TAHVO_REG_LEDPWMR, level);
++}
++
++/*
++ * TAHVO interrupt handler. Only schedules the tasklet.
++ */
++static irqreturn_t tahvo_irq_handler(int irq, void *dev_id)
++{
++ tasklet_schedule(&tahvo_tasklet);
++ return IRQ_HANDLED;
++}
++
++/*
++ * Tasklet handler
++ */
++static void tahvo_tasklet_handler(unsigned long data)
++{
++ struct tahvo_irq_handler_desc *hnd;
++ u16 id;
++ u16 im;
++ int i;
++
++ for (;;) {
++ id = tahvo_read_reg(TAHVO_REG_IDR);
++ im = ~tahvo_read_reg(TAHVO_REG_IMR);
++ id &= im;
++
++ if (!id)
++ break;
++
++ for (i = 0; id != 0; i++, id >>= 1) {
++ if (!(id & 1))
++ continue;
++ hnd = &tahvo_irq_handlers[i];
++ if (hnd->func == NULL) {
++ /* Spurious tahvo interrupt - just ack it */
++ printk(KERN_INFO "Spurious Tahvo interrupt "
++ "(id %d)\n", i);
++ tahvo_disable_irq(i);
++ tahvo_ack_irq(i);
++ continue;
++ }
++ hnd->func(hnd->arg);
++ /*
++ * Don't acknowledge the interrupt here
++ * It must be done explicitly
++ */
++ }
++ }
++}
++
++/*
++ * Register the handler for a given TAHVO interrupt source.
++ */
++int tahvo_request_irq(int id, void *irq_handler, unsigned long arg, char *name)
++{
++ struct tahvo_irq_handler_desc *hnd;
++
++ if (irq_handler == NULL || id >= MAX_TAHVO_IRQ_HANDLERS ||
++ name == NULL) {
++ printk(KERN_ERR PFX "Invalid arguments to %s\n",
++ __FUNCTION__);
++ return -EINVAL;
++ }
++ hnd = &tahvo_irq_handlers[id];
++ if (hnd->func != NULL) {
++ printk(KERN_ERR PFX "IRQ %d already reserved\n", id);
++ return -EBUSY;
++ }
++ printk(KERN_INFO PFX "Registering interrupt %d for device %s\n",
++ id, name);
++ hnd->func = irq_handler;
++ hnd->arg = arg;
++ strlcpy(hnd->name, name, sizeof(hnd->name));
++
++ tahvo_ack_irq(id);
++ tahvo_enable_irq(id);
++
++ return 0;
++}
++
++/*
++ * Unregister the handler for a given TAHVO interrupt source.
++ */
++void tahvo_free_irq(int id)
++{
++ struct tahvo_irq_handler_desc *hnd;
++
++ if (id >= MAX_TAHVO_IRQ_HANDLERS) {
++ printk(KERN_ERR PFX "Invalid argument to %s\n",
++ __FUNCTION__);
++ return;
++ }
++ hnd = &tahvo_irq_handlers[id];
++ if (hnd->func == NULL) {
++ printk(KERN_ERR PFX "IRQ %d already freed\n", id);
++ return;
++ }
++
++ tahvo_disable_irq(id);
++ hnd->func = NULL;
++}
++
++/**
++ * tahvo_probe - Probe for Tahvo ASIC
++ * @dev: the Tahvo device
++ *
++ * Probe for the Tahvo ASIC and allocate memory
++ * for its device-struct if found
++ */
++static int __devinit tahvo_probe(struct device *dev)
++{
++ const struct omap_em_asic_bb5_config * em_asic_config;
++ int rev, id, ret;
++
++ /* Prepare tasklet */
++ tasklet_init(&tahvo_tasklet, tahvo_tasklet_handler, 0);
++
++ em_asic_config = omap_get_config(OMAP_TAG_EM_ASIC_BB5,
++ struct omap_em_asic_bb5_config);
++ if (em_asic_config == NULL) {
++ printk(KERN_ERR PFX "Unable to retrieve config data\n");
++ return -ENODATA;
++ }
++
++ tahvo_initialized = 1;
++
++ rev = tahvo_read_reg(TAHVO_REG_ASICR);
++
++ id = (rev >> 8) & 0xff;
++ if (id == 0x03) {
++ if ((rev & 0xff) >= 0x50)
++ tahvo_7bit_backlight = 1;
++ } else if (id == 0x0b) {
++ tahvo_is_betty = 1;
++ tahvo_7bit_backlight = 1;
++ } else {
++ printk(KERN_ERR "Tahvo/Betty chip not found");
++ return -ENODEV;
++ }
++
++ printk(KERN_INFO "%s v%d.%d found\n", tahvo_is_betty ? "Betty" : "Tahvo",
++ (rev >> 4) & 0x0f, rev & 0x0f);
++
++ tahvo_irq_pin = em_asic_config->tahvo_irq_gpio;
++
++ if ((ret = gpio_request(tahvo_irq_pin, "TAHVO irq")) < 0) {
++ printk(KERN_ERR PFX "Unable to reserve IRQ GPIO\n");
++ return ret;
++ }
++
++ /* Set the pin as input */
++ gpio_direction_input(tahvo_irq_pin);
++
++ /* Rising edge triggers the IRQ */
++ set_irq_type(gpio_to_irq(tahvo_irq_pin), IRQ_TYPE_EDGE_RISING);
++
++ /* Mask all TAHVO interrupts */
++ tahvo_write_reg(TAHVO_REG_IMR, 0xffff);
++
++ ret = request_irq(gpio_to_irq(tahvo_irq_pin), tahvo_irq_handler, 0,
++ "tahvo", 0);
++ if (ret < 0) {
++ printk(KERN_ERR PFX "Unable to register IRQ handler\n");
++ gpio_free(tahvo_irq_pin);
++ return ret;
++ }
++#ifdef CONFIG_CBUS_TAHVO_USER
++ /* Initialize user-space interface */
++ if (tahvo_user_init() < 0) {
++ printk(KERN_ERR "Unable to initialize driver\n");
++ free_irq(gpio_to_irq(tahvo_irq_pin), 0);
++ gpio_free(tahvo_irq_pin);
++ return ret;
++ }
++#endif
++ return 0;
++}
++
++static int tahvo_remove(struct device *dev)
++{
++#ifdef CONFIG_CBUS_TAHVO_USER
++ tahvo_user_cleanup();
++#endif
++ /* Mask all TAHVO interrupts */
++ tahvo_write_reg(TAHVO_REG_IMR, 0xffff);
++ free_irq(gpio_to_irq(tahvo_irq_pin), 0);
++ gpio_free(tahvo_irq_pin);
++ tasklet_kill(&tahvo_tasklet);
++
++ return 0;
++}
++
++static void tahvo_device_release(struct device *dev)
++{
++ complete(&device_release);
++}
++
++static struct device_driver tahvo_driver = {
++ .name = "tahvo",
++ .bus = &platform_bus_type,
++ .probe = tahvo_probe,
++ .remove = tahvo_remove,
++};
++
++static struct platform_device tahvo_device = {
++ .name = "tahvo",
++ .id = -1,
++ .dev = {
++ .release = tahvo_device_release,
++ }
++};
++
++/**
++ * tahvo_init - initialise Tahvo driver
++ *
++ * Initialise the Tahvo driver and return 0 if everything worked ok
++ */
++static int __init tahvo_init(void)
++{
++ int ret = 0;
++
++ printk(KERN_INFO "Tahvo/Betty driver initialising\n");
++
++ init_completion(&device_release);
++
++ if ((ret = driver_register(&tahvo_driver)) < 0)
++ return ret;
++
++ if ((ret = platform_device_register(&tahvo_device)) < 0) {
++ driver_unregister(&tahvo_driver);
++ return ret;
++ }
++ return 0;
++}
++
++/*
++ * Cleanup
++ */
++static void __exit tahvo_exit(void)
++{
++ platform_device_unregister(&tahvo_device);
++ driver_unregister(&tahvo_driver);
++ wait_for_completion(&device_release);
++}
++
++EXPORT_SYMBOL(tahvo_request_irq);
++EXPORT_SYMBOL(tahvo_free_irq);
++EXPORT_SYMBOL(tahvo_enable_irq);
++EXPORT_SYMBOL(tahvo_disable_irq);
++EXPORT_SYMBOL(tahvo_ack_irq);
++EXPORT_SYMBOL(tahvo_read_reg);
++EXPORT_SYMBOL(tahvo_write_reg);
++EXPORT_SYMBOL(tahvo_get_backlight_level);
++EXPORT_SYMBOL(tahvo_get_max_backlight_level);
++EXPORT_SYMBOL(tahvo_set_backlight_level);
++
++subsys_initcall(tahvo_init);
++module_exit(tahvo_exit);
++
++MODULE_DESCRIPTION("Tahvo ASIC control");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Juha Yrjölä, David Weinehall, and Mikko Ylinen");
+diff --git a/drivers/cbus/tahvo.h b/drivers/cbus/tahvo.h
+new file mode 100644
+index 0000000..b7a8ee1
+--- /dev/null
++++ b/drivers/cbus/tahvo.h
+@@ -0,0 +1,61 @@
++/*
++ * drivers/cbus/tahvo.h
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
++ * David Weinehall <david.weinehall@nokia.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __DRIVERS_CBUS_TAHVO_H
++#define __DRIVERS_CBUS_TAHVO_H
++
++#include <linux/types.h>
++
++/* Registers */
++#define TAHVO_REG_ASICR 0x00 /* ASIC ID & revision */
++#define TAHVO_REG_IDR 0x01 /* Interrupt ID */
++#define TAHVO_REG_IDSR 0x02 /* Interrupt status */
++#define TAHVO_REG_IMR 0x03 /* Interrupt mask */
++#define TAHVO_REG_LEDPWMR 0x05 /* LED PWM */
++#define TAHVO_REG_USBR 0x06 /* USB control */
++#define TAHVO_REG_MAX 0x0d
++
++/* Interrupt sources */
++#define TAHVO_INT_VBUSON 0
++
++#define MAX_TAHVO_IRQ_HANDLERS 8
++
++int tahvo_read_reg(int reg);
++void tahvo_write_reg(int reg, u16 val);
++void tahvo_set_clear_reg_bits(int reg, u16 set, u16 clear);
++int tahvo_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
++void tahvo_free_irq(int id);
++void tahvo_enable_irq(int id);
++void tahvo_disable_irq(int id);
++void tahvo_ack_irq(int id);
++int tahvo_get_backlight_level(void);
++int tahvo_get_max_backlight_level(void);
++void tahvo_set_backlight_level(int level);
++
++#ifdef CONFIG_CBUS_TAHVO_USER
++int tahvo_user_init(void);
++void tahvo_user_cleanup(void);
++#endif
++
++extern spinlock_t tahvo_lock;
++
++#endif /* __DRIVERS_CBUS_TAHVO_H */
+diff --git a/drivers/cbus/user_retu_tahvo.h b/drivers/cbus/user_retu_tahvo.h
+new file mode 100644
+index 0000000..a5c2190
+--- /dev/null
++++ b/drivers/cbus/user_retu_tahvo.h
+@@ -0,0 +1,75 @@
++/**
++ * drivers/cbus/user_retu_tahvo.h
++ *
++ * Copyright (C) 2004, 2005 Nokia Corporation
++ *
++ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com>
++ *
++ * Definitions and types used by both retu-user and tahvo-user.
++ *
++ * This file is subject to the terms and conditions of the GNU General
++ * Public License. See the file "COPYING" in the main directory of this
++ * archive for more details.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef _USER_RETU_TAHVO_H
++#define _USER_RETU_TAHVO_H
++
++/* Chip IDs */
++#define CHIP_RETU 1
++#define CHIP_TAHVO 2
++
++/* Register access type bits */
++#define READ_ONLY 1
++#define WRITE_ONLY 2
++#define READ_WRITE 3
++#define TOGGLE 4
++
++#define MASK(field) ((u16)(field & 0xFFFF))
++#define REG(field) ((u16)((field >> 16) & 0x3F))
++
++/*** IOCTL definitions. These should be kept in sync with user space **********/
++
++#define URT_IOC_MAGIC '`'
++
++/*
++ * IOCTL function naming conventions:
++ * ==================================
++ * 0 -- No argument and return value
++ * S -- Set through a pointer
++ * T -- Tell directly with the argument value
++ * G -- Reply by setting through a pointer
++ * Q -- response is on the return value
++ * X -- S and G atomically
++ * H -- T and Q atomically
++ */
++
++/* General */
++#define URT_IOCT_IRQ_SUBSCR _IO(URT_IOC_MAGIC, 0)
++
++/* RETU */
++#define RETU_IOCH_READ _IO(URT_IOC_MAGIC, 1)
++#define RETU_IOCX_WRITE _IO(URT_IOC_MAGIC, 2)
++#define RETU_IOCH_ADC_READ _IO(URT_IOC_MAGIC, 3)
++
++/* TAHVO */
++#define TAHVO_IOCH_READ _IO(URT_IOC_MAGIC, 4)
++#define TAHVO_IOCX_WRITE _IO(URT_IOC_MAGIC, 5)
++
++/* This structure is used for writing RETU/TAHVO registers */
++struct retu_tahvo_write_parms {
++ u32 field;
++ u16 value;
++ u8 result;
++};
++
++#endif
+diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
+index 4487cc0..0aecaae 100644
+--- a/drivers/mmc/host/omap_hsmmc.c
++++ b/drivers/mmc/host/omap_hsmmc.c
+@@ -2013,7 +2013,7 @@ static struct platform_driver omap_hsmmc_driver = {
+ static int __init omap_hsmmc_init(void)
+ {
+ /* Register the MMC driver */
+- return platform_driver_register(&omap_hsmmc_driver);
++ return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe);
+ }
+
+ static void __exit omap_hsmmc_cleanup(void)
+diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
+index e75ba9b..7bcf409 100644
+--- a/drivers/spi/omap_uwire.c
++++ b/drivers/spi/omap_uwire.c
+@@ -52,7 +52,7 @@
+ #include <asm/mach-types.h>
+
+ #include <mach/mux.h>
+-#include <mach/omap730.h> /* OMAP730_IO_CONF registers */
++#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
+
+
+ /* FIXME address is now a platform device resource,
+@@ -504,7 +504,7 @@ static int __init uwire_probe(struct platform_device *pdev)
+ }
+ clk_enable(uwire->ck);
+
+- if (cpu_is_omap730())
++ if (cpu_is_omap7xx())
+ uwire_idx_shift = 1;
+ else
+ uwire_idx_shift = 2;
+@@ -573,8 +573,8 @@ static int __init omap_uwire_init(void)
+ }
+ if (machine_is_omap_perseus2()) {
+ /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
+- int val = omap_readl(OMAP730_IO_CONF_9) & ~0x00EEE000;
+- omap_writel(val | 0x00AAA000, OMAP730_IO_CONF_9);
++ int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
++ omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
+ }
+
+ return platform_driver_probe(&uwire_driver, uwire_probe);
+diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
+index 2407508..5620e92 100644
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -60,6 +60,7 @@ config USB_ARCH_HAS_EHCI
+ default y if ARCH_IXP4XX
+ default y if ARCH_W90X900
+ default y if ARCH_AT91SAM9G45
++ default y if ARCH_OMAP34XX
+ default PCI
+
+ # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
+diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
+index 9835e07..44c208c 100644
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1108,6 +1108,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
+ #endif
+
++#ifdef CONFIG_ARCH_OMAP34XX
++#include "ehci-omap.c"
++#define PLATFORM_DRIVER ehci_hcd_omap_driver
++#endif
++
+ #ifdef CONFIG_PPC_PS3
+ #include "ehci-ps3.c"
+ #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
+diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
+new file mode 100644
+index 0000000..7ba8df3
+--- /dev/null
++++ b/drivers/usb/host/ehci-omap.c
+@@ -0,0 +1,755 @@
++/*
++ * ehci-omap.c - driver for USBHOST on OMAP 34xx processor
++ *
++ * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller
++ * Tested on OMAP3430 ES2.0 SDP
++ *
++ * Copyright (C) 2007-2008 Texas Instruments, Inc.
++ * Author: Vikram Pandita <vikram.pandita@ti.com>
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
++ *
++ * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * TODO (last updated Feb 23rd, 2009):
++ * - add kernel-doc
++ * - enable AUTOIDLE
++ * - move DPLL5 programming to clock fw
++ * - add suspend/resume
++ * - move workarounds to board-files
++ */
++
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/gpio.h>
++#include <mach/usb.h>
++
++/*
++ * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES
++ * Use ehci_omap_readl()/ehci_omap_writel() functions
++ */
++
++/* TLL Register Set */
++#define OMAP_USBTLL_REVISION (0x00)
++#define OMAP_USBTLL_SYSCONFIG (0x10)
++#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
++#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
++#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
++#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
++#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0)
++
++#define OMAP_USBTLL_SYSSTATUS (0x14)
++#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0)
++
++#define OMAP_USBTLL_IRQSTATUS (0x18)
++#define OMAP_USBTLL_IRQENABLE (0x1C)
++
++#define OMAP_TLL_SHARED_CONF (0x30)
++#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6)
++#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5)
++#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2)
++#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1)
++#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0)
++
++#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num)
++#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11)
++#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10)
++#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9)
++#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8)
++#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0)
++
++#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num)
++#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num)
++#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num)
++#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num)
++#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num)
++#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num)
++#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num)
++#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num)
++#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num)
++
++#define OMAP_TLL_CHANNEL_COUNT 3
++#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 1)
++#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 2)
++#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 4)
++
++/* UHH Register Set */
++#define OMAP_UHH_REVISION (0x00)
++#define OMAP_UHH_SYSCONFIG (0x10)
++#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12)
++#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8)
++#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3)
++#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2)
++#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1)
++#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0)
++
++#define OMAP_UHH_SYSSTATUS (0x14)
++#define OMAP_UHH_HOSTCONFIG (0x40)
++#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0)
++#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0)
++#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11)
++#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12)
++#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2)
++#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3)
++#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4)
++#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5)
++#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8)
++#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9)
++#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10)
++
++#define OMAP_UHH_DEBUG_CSR (0x44)
++
++/* EHCI Register Set */
++#define EHCI_INSNREG05_ULPI (0xA4)
++#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
++#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
++#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
++#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
++#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
++#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
++
++/*-------------------------------------------------------------------------*/
++
++static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val)
++{
++ __raw_writel(val, base + reg);
++}
++
++static inline u32 ehci_omap_readl(void __iomem *base, u32 reg)
++{
++ return __raw_readl(base + reg);
++}
++
++static inline void ehci_omap_writeb(void __iomem *base, u8 reg, u8 val)
++{
++ __raw_writeb(val, base + reg);
++}
++
++static inline u8 ehci_omap_readb(void __iomem *base, u8 reg)
++{
++ return __raw_readb(base + reg);
++}
++
++/*-------------------------------------------------------------------------*/
++
++struct ehci_hcd_omap {
++ struct ehci_hcd *ehci;
++ struct device *dev;
++
++ struct clk *usbhost_ick;
++ struct clk *usbhost2_120m_fck;
++ struct clk *usbhost1_48m_fck;
++ struct clk *usbtll_fck;
++ struct clk *usbtll_ick;
++
++ /* FIXME the following two workarounds are
++ * board specific not silicon-specific so these
++ * should be moved to board-file instead.
++ *
++ * Maybe someone from TI will know better which
++ * board is affected and needs the workarounds
++ * to be applied
++ */
++
++ /* gpio for resetting phy */
++ int reset_gpio_port[OMAP3_HS_USB_PORTS];
++
++ /* phy reset workaround */
++ int phy_reset;
++
++ /* desired phy_mode: TLL, PHY */
++ enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS];
++
++ void __iomem *uhh_base;
++ void __iomem *tll_base;
++ void __iomem *ehci_base;
++};
++
++/*-------------------------------------------------------------------------*/
++
++static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
++{
++ unsigned reg;
++ int i;
++
++ /* Program the 3 TLL channels upfront */
++ for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
++ reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
++
++ /* Disable AutoIdle, BitStuffing and use SDR Mode */
++ reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
++ | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
++ | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
++ ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg);
++ }
++
++ /* Program Common TLL register */
++ reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF);
++ reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
++ | OMAP_TLL_SHARED_CONF_USB_DIVRATION
++ | OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN);
++ reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
++
++ ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
++
++ /* Enable channels now */
++ for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
++ reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
++
++ /* Enable only the reg that is needed */
++ if (!(tll_channel_mask & 1<<i))
++ continue;
++
++ reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
++ ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg);
++
++ ehci_omap_writeb(omap->tll_base,
++ OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
++ dev_dbg(omap->dev, "ULPI_SCRATCH_REG[ch=%d]= 0x%02x\n",
++ i+1, ehci_omap_readb(omap->tll_base,
++ OMAP_TLL_ULPI_SCRATCH_REGISTER(i)));
++ }
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* omap_start_ehc
++ * - Start the TI USBHOST controller
++ */
++static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
++ u8 tll_ch_mask = 0;
++ unsigned reg = 0;
++ int ret = 0;
++
++ dev_dbg(omap->dev, "starting TI EHCI USB Controller\n");
++
++ /* Enable Clocks for USBHOST */
++ omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick");
++ if (IS_ERR(omap->usbhost_ick)) {
++ ret = PTR_ERR(omap->usbhost_ick);
++ goto err_host_ick;
++ }
++ clk_enable(omap->usbhost_ick);
++
++ omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
++ if (IS_ERR(omap->usbhost2_120m_fck)) {
++ ret = PTR_ERR(omap->usbhost2_120m_fck);
++ goto err_host_120m_fck;
++ }
++ clk_enable(omap->usbhost2_120m_fck);
++
++ omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
++ if (IS_ERR(omap->usbhost1_48m_fck)) {
++ ret = PTR_ERR(omap->usbhost1_48m_fck);
++ goto err_host_48m_fck;
++ }
++ clk_enable(omap->usbhost1_48m_fck);
++
++ if (omap->phy_reset) {
++ /* Refer: ISSUE1 */
++ if (gpio_is_valid(omap->reset_gpio_port[0])) {
++ gpio_request(omap->reset_gpio_port[0],
++ "USB1 PHY reset");
++ gpio_direction_output(omap->reset_gpio_port[0], 0);
++ }
++
++ if (gpio_is_valid(omap->reset_gpio_port[1])) {
++ gpio_request(omap->reset_gpio_port[1],
++ "USB2 PHY reset");
++ gpio_direction_output(omap->reset_gpio_port[1], 0);
++ }
++
++ /* Hold the PHY in RESET for enough time till DIR is high */
++ udelay(10);
++ }
++
++ /* Configure TLL for 60Mhz clk for ULPI */
++ omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck");
++ if (IS_ERR(omap->usbtll_fck)) {
++ ret = PTR_ERR(omap->usbtll_fck);
++ goto err_tll_fck;
++ }
++ clk_enable(omap->usbtll_fck);
++
++ omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick");
++ if (IS_ERR(omap->usbtll_ick)) {
++ ret = PTR_ERR(omap->usbtll_ick);
++ goto err_tll_ick;
++ }
++ clk_enable(omap->usbtll_ick);
++
++ /* perform TLL soft reset, and wait until reset is complete */
++ ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
++ OMAP_USBTLL_SYSCONFIG_SOFTRESET);
++
++ /* Wait for TLL reset to complete */
++ while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
++ & OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
++ cpu_relax();
++
++ if (time_after(jiffies, timeout)) {
++ dev_dbg(omap->dev, "operation timed out\n");
++ ret = -EINVAL;
++ goto err_sys_status;
++ }
++ }
++
++ dev_dbg(omap->dev, "TLL RESET DONE\n");
++
++ /* (1<<3) = no idle mode only for initial debugging */
++ ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
++ OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
++ OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
++ OMAP_USBTLL_SYSCONFIG_CACTIVITY);
++
++
++ /* Put UHH in NoIdle/NoStandby mode */
++ reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
++ reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
++ | OMAP_UHH_SYSCONFIG_SIDLEMODE
++ | OMAP_UHH_SYSCONFIG_CACTIVITY
++ | OMAP_UHH_SYSCONFIG_MIDLEMODE);
++ reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
++
++ ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
++
++ reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
++
++ /* setup ULPI bypass and burst configurations */
++ reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
++ | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
++ | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
++ reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
++
++ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
++ reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
++ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
++ reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
++ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
++ reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
++
++ /* Bypass the TLL module for PHY mode operation */
++ if (omap_rev() <= OMAP3430_REV_ES2_1) {
++ dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1 \n");
++ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ||
++ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ||
++ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY))
++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
++ else
++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
++ } else {
++ dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
++ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
++ else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
++
++ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
++ else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
++
++ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)
++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
++ else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
++
++ }
++ ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
++ dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
++
++
++ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ||
++ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ||
++ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) {
++
++ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
++ tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK;
++ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
++ tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK;
++ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
++ tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
++
++ /* Enable UTMI mode for required TLL channels */
++ omap_usb_utmi_init(omap, tll_ch_mask);
++ }
++
++ if (omap->phy_reset) {
++ /* Refer ISSUE1:
++ * Hold the PHY in RESET for enough time till
++ * PHY is settled and ready
++ */
++ udelay(10);
++
++ if (gpio_is_valid(omap->reset_gpio_port[0]))
++ gpio_set_value(omap->reset_gpio_port[0], 1);
++
++ if (gpio_is_valid(omap->reset_gpio_port[1]))
++ gpio_set_value(omap->reset_gpio_port[1], 1);
++ }
++
++ return 0;
++
++err_sys_status:
++ clk_disable(omap->usbtll_ick);
++ clk_put(omap->usbtll_ick);
++
++err_tll_ick:
++ clk_disable(omap->usbtll_fck);
++ clk_put(omap->usbtll_fck);
++
++err_tll_fck:
++ clk_disable(omap->usbhost1_48m_fck);
++ clk_put(omap->usbhost1_48m_fck);
++
++ if (omap->phy_reset) {
++ if (gpio_is_valid(omap->reset_gpio_port[0]))
++ gpio_free(omap->reset_gpio_port[0]);
++
++ if (gpio_is_valid(omap->reset_gpio_port[1]))
++ gpio_free(omap->reset_gpio_port[1]);
++ }
++
++err_host_48m_fck:
++ clk_disable(omap->usbhost2_120m_fck);
++ clk_put(omap->usbhost2_120m_fck);
++
++err_host_120m_fck:
++ clk_disable(omap->usbhost_ick);
++ clk_put(omap->usbhost_ick);
++
++err_host_ick:
++ return ret;
++}
++
++static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(100);
++
++ dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n");
++
++ /* Reset OMAP modules for insmod/rmmod to work */
++ ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
++ OMAP_UHH_SYSCONFIG_SOFTRESET);
++ while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
++ & (1 << 0))) {
++ cpu_relax();
++
++ if (time_after(jiffies, timeout))
++ dev_dbg(omap->dev, "operation timed out\n");
++ }
++
++ while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
++ & (1 << 1))) {
++ cpu_relax();
++
++ if (time_after(jiffies, timeout))
++ dev_dbg(omap->dev, "operation timed out\n");
++ }
++
++ while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
++ & (1 << 2))) {
++ cpu_relax();
++
++ if (time_after(jiffies, timeout))
++ dev_dbg(omap->dev, "operation timed out\n");
++ }
++
++ ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
++
++ while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
++ & (1 << 0))) {
++ cpu_relax();
++
++ if (time_after(jiffies, timeout))
++ dev_dbg(omap->dev, "operation timed out\n");
++ }
++
++ if (omap->usbtll_fck != NULL) {
++ clk_disable(omap->usbtll_fck);
++ clk_put(omap->usbtll_fck);
++ omap->usbtll_fck = NULL;
++ }
++
++ if (omap->usbhost_ick != NULL) {
++ clk_disable(omap->usbhost_ick);
++ clk_put(omap->usbhost_ick);
++ omap->usbhost_ick = NULL;
++ }
++
++ if (omap->usbhost1_48m_fck != NULL) {
++ clk_disable(omap->usbhost1_48m_fck);
++ clk_put(omap->usbhost1_48m_fck);
++ omap->usbhost1_48m_fck = NULL;
++ }
++
++ if (omap->usbhost2_120m_fck != NULL) {
++ clk_disable(omap->usbhost2_120m_fck);
++ clk_put(omap->usbhost2_120m_fck);
++ omap->usbhost2_120m_fck = NULL;
++ }
++
++ if (omap->usbtll_ick != NULL) {
++ clk_disable(omap->usbtll_ick);
++ clk_put(omap->usbtll_ick);
++ omap->usbtll_ick = NULL;
++ }
++
++ if (omap->phy_reset) {
++ if (gpio_is_valid(omap->reset_gpio_port[0]))
++ gpio_free(omap->reset_gpio_port[0]);
++
++ if (gpio_is_valid(omap->reset_gpio_port[1]))
++ gpio_free(omap->reset_gpio_port[1]);
++ }
++
++ dev_dbg(omap->dev, "Clock to USB host has been disabled\n");
++}
++
++/*-------------------------------------------------------------------------*/
++
++static const struct hc_driver ehci_omap_hc_driver;
++
++/* configure so an HC device and id are always provided */
++/* always called with process context; sleeping is OK */
++
++/**
++ * ehci_hcd_omap_probe - initialize TI-based HCDs
++ *
++ * Allocates basic resources for this USB host controller, and
++ * then invokes the start() method for the HCD associated with it
++ * through the hotplug entry's driver_data.
++ */
++static int ehci_hcd_omap_probe(struct platform_device *pdev)
++{
++ struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
++ struct ehci_hcd_omap *omap;
++ struct resource *res;
++ struct usb_hcd *hcd;
++
++ int irq = platform_get_irq(pdev, 0);
++ int ret = -ENODEV;
++
++ if (!pdata) {
++ dev_dbg(&pdev->dev, "missing platform_data\n");
++ goto err_pdata;
++ }
++
++ if (usb_disabled())
++ goto err_disabled;
++
++ omap = kzalloc(sizeof(*omap), GFP_KERNEL);
++ if (!omap) {
++ ret = -ENOMEM;
++ goto err_create_hcd;
++ }
++
++ hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
++ dev_name(&pdev->dev));
++ if (!hcd) {
++ dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
++ ret = -ENOMEM;
++ goto err_create_hcd;
++ }
++
++ platform_set_drvdata(pdev, omap);
++ omap->dev = &pdev->dev;
++ omap->phy_reset = pdata->phy_reset;
++ omap->reset_gpio_port[0] = pdata->reset_gpio_port[0];
++ omap->reset_gpio_port[1] = pdata->reset_gpio_port[1];
++ omap->reset_gpio_port[2] = pdata->reset_gpio_port[2];
++ omap->port_mode[0] = pdata->port_mode[0];
++ omap->port_mode[1] = pdata->port_mode[1];
++ omap->port_mode[2] = pdata->port_mode[2];
++ omap->ehci = hcd_to_ehci(hcd);
++ omap->ehci->sbrn = 0x20;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++ hcd->rsrc_start = res->start;
++ hcd->rsrc_len = resource_size(res);
++
++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs) {
++ dev_err(&pdev->dev, "EHCI ioremap failed\n");
++ ret = -ENOMEM;
++ goto err_ioremap;
++ }
++
++ /* we know this is the memory we want, no need to ioremap again */
++ omap->ehci->caps = hcd->regs;
++ omap->ehci_base = hcd->regs;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ omap->uhh_base = ioremap(res->start, resource_size(res));
++ if (!omap->uhh_base) {
++ dev_err(&pdev->dev, "UHH ioremap failed\n");
++ ret = -ENOMEM;
++ goto err_uhh_ioremap;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
++ omap->tll_base = ioremap(res->start, resource_size(res));
++ if (!omap->tll_base) {
++ dev_err(&pdev->dev, "TLL ioremap failed\n");
++ ret = -ENOMEM;
++ goto err_tll_ioremap;
++ }
++
++ ret = omap_start_ehc(omap, hcd);
++ if (ret) {
++ dev_dbg(&pdev->dev, "failed to start ehci\n");
++ goto err_start;
++ }
++
++ omap->ehci->regs = hcd->regs
++ + HC_LENGTH(readl(&omap->ehci->caps->hc_capbase));
++
++ /* cache this readonly data; minimize chip reads */
++ omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params);
++
++ /* SET 1 micro-frame Interrupt interval */
++ writel(readl(&omap->ehci->regs->command) | (1 << 16),
++ &omap->ehci->regs->command);
++
++ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
++ if (ret) {
++ dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
++ goto err_add_hcd;
++ }
++
++ return 0;
++
++err_add_hcd:
++ omap_stop_ehc(omap, hcd);
++
++err_start:
++ iounmap(omap->tll_base);
++
++err_tll_ioremap:
++ iounmap(omap->uhh_base);
++
++err_uhh_ioremap:
++ iounmap(hcd->regs);
++
++err_ioremap:
++ usb_put_hcd(hcd);
++
++err_create_hcd:
++err_disabled:
++err_pdata:
++ return ret;
++}
++
++/* may be called without controller electrically present */
++/* may be called with controller, bus, and devices active */
++
++/**
++ * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
++ * @pdev: USB Host Controller being removed
++ *
++ * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
++ * the HCD's stop() method. It is always called from a thread
++ * context, normally "rmmod", "apmd", or something similar.
++ */
++static int ehci_hcd_omap_remove(struct platform_device *pdev)
++{
++ struct ehci_hcd_omap *omap = platform_get_drvdata(pdev);
++ struct usb_hcd *hcd = ehci_to_hcd(omap->ehci);
++
++ usb_remove_hcd(hcd);
++ omap_stop_ehc(omap, hcd);
++ iounmap(hcd->regs);
++ iounmap(omap->tll_base);
++ iounmap(omap->uhh_base);
++ usb_put_hcd(hcd);
++
++ return 0;
++}
++
++static void ehci_hcd_omap_shutdown(struct platform_device *pdev)
++{
++ struct ehci_hcd_omap *omap = platform_get_drvdata(pdev);
++ struct usb_hcd *hcd = ehci_to_hcd(omap->ehci);
++
++ if (hcd->driver->shutdown)
++ hcd->driver->shutdown(hcd);
++}
++
++static struct platform_driver ehci_hcd_omap_driver = {
++ .probe = ehci_hcd_omap_probe,
++ .remove = ehci_hcd_omap_remove,
++ .shutdown = ehci_hcd_omap_shutdown,
++ /*.suspend = ehci_hcd_omap_suspend, */
++ /*.resume = ehci_hcd_omap_resume, */
++ .driver = {
++ .name = "ehci-omap",
++ }
++};
++
++/*-------------------------------------------------------------------------*/
++
++static const struct hc_driver ehci_omap_hc_driver = {
++ .description = hcd_name,
++ .product_desc = "OMAP-EHCI Host Controller",
++ .hcd_priv_size = sizeof(struct ehci_hcd),
++
++ /*
++ * generic hardware linkage
++ */
++ .irq = ehci_irq,
++ .flags = HCD_MEMORY | HCD_USB2,
++
++ /*
++ * basic lifecycle operations
++ */
++ .reset = ehci_init,
++ .start = ehci_run,
++ .stop = ehci_stop,
++ .shutdown = ehci_shutdown,
++
++ /*
++ * managing i/o requests and associated device resources
++ */
++ .urb_enqueue = ehci_urb_enqueue,
++ .urb_dequeue = ehci_urb_dequeue,
++ .endpoint_disable = ehci_endpoint_disable,
++ .endpoint_reset = ehci_endpoint_reset,
++
++ /*
++ * scheduling support
++ */
++ .get_frame_number = ehci_get_frame,
++
++ /*
++ * root hub support
++ */
++ .hub_status_data = ehci_hub_status_data,
++ .hub_control = ehci_hub_control,
++ .bus_suspend = ehci_bus_suspend,
++ .bus_resume = ehci_bus_resume,
++
++ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
++};
++
++MODULE_ALIAS("platform:omap-ehci");
++MODULE_AUTHOR("Texas Instruments, Inc.");
++MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
++
+diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
+index f16e421..6f957ce 100644
+--- a/drivers/video/omap/dispc.c
++++ b/drivers/video/omap/dispc.c
+@@ -204,6 +204,7 @@ static u32 inline dispc_read_reg(int idx)
+ /* Select RFBI or bypass mode */
+ static void enable_rfbi_mode(int enable)
+ {
++ void __iomem *rfbi_control;
+ u32 l;
+
+ l = dispc_read_reg(DISPC_CONTROL);
+@@ -216,9 +217,15 @@ static void enable_rfbi_mode(int enable)
+ dispc_write_reg(DISPC_CONTROL, l);
+
+ /* Set bypass mode in RFBI module */
+- l = __raw_readl(OMAP2_IO_ADDRESS(RFBI_CONTROL));
++ rfbi_control = ioremap(RFBI_CONTROL, SZ_1K);
++ if (!rfbi_control) {
++ pr_err("Unable to ioremap rfbi_control\n");
++ return;
++ }
++ l = __raw_readl(rfbi_control);
+ l |= enable ? 0 : (1 << 1);
+- __raw_writel(l, OMAP2_IO_ADDRESS(RFBI_CONTROL));
++ __raw_writel(l, rfbi_control);
++ iounmap(rfbi_control);
+ }
+
+ static void set_lcd_data_lines(int data_lines)
+@@ -1367,6 +1374,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
+ int r;
+ u32 l;
+ struct lcd_panel *panel = fbdev->panel;
++ void __iomem *ram_fw_base;
+ int tmo = 10000;
+ int skip_init = 0;
+ int i;
+@@ -1441,7 +1449,13 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
+ }
+
+ /* L3 firewall setting: enable access to OCM RAM */
+- __raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0));
++ ram_fw_base = ioremap(0x68005000, SZ_1K);
++ if (!ram_fw_base) {
++ dev_err(dispc.fbdev->dev, "Cannot ioremap to enable OCM RAM\n");
++ goto fail1;
++ }
++ __raw_writel(0x402000b0, ram_fw_base + 0xa0);
++ iounmap(ram_fw_base);
+
+ if ((r = alloc_palette_ram()) < 0)
+ goto fail2;
projects / openwrt.git / commitdiff