#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/ctype.h>
+
+diff -ur atm.old/tn7dsl.c atm.dev/tn7dsl.c
+--- atm.old/tn7dsl.c 2007-05-24 17:36:33.865636000 +0200
++++ atm.dev/tn7dsl.c 2007-05-24 17:41:32.094298496 +0200
+@@ -3430,8 +3430,7 @@
+ if (initialized == 1)
+ return;
+
+- dslmod_sysctl_header = register_sysctl_table(dslmod_root_table, 1);
+- dslmod_root_table->child->de->owner = THIS_MODULE;
++ dslmod_sysctl_header = register_sysctl_table(dslmod_root_table);
+
+ /*
+ * set the defaults
CONFIG_AR7=y
CONFIG_AR7_GPIO=y
CONFIG_AR7_WDT=y
CONFIG_AR7=y
CONFIG_AR7_GPIO=y
CONFIG_AR7_WDT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
# CONFIG_ATMEL is not set
CONFIG_BASE_SMALL=0
# CONFIG_BCM43XX is not set
# CONFIG_ATMEL is not set
CONFIG_BASE_SMALL=0
# CONFIG_BCM43XX is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BOOT_ELF32=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BOOT_ELF32=y
+# CONFIG_BROADCOM_PHY is not set
# CONFIG_BT is not set
CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2,"
CONFIG_CPMAC=y
# CONFIG_BT is not set
CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2,"
CONFIG_CPMAC=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_FIXED_MII_100_FDX=y
# CONFIG_FIXED_MII_10_FDX is not set
CONFIG_FIXED_PHY=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_FIXED_MII_100_FDX=y
# CONFIG_FIXED_MII_10_FDX is not set
CONFIG_FIXED_PHY=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
# CONFIG_GEN_RTC is not set
# CONFIG_GEN_RTC is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
# CONFIG_HERMES is not set
# CONFIG_HOSTAP_PCI is not set
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HERMES is not set
# CONFIG_HOSTAP_PCI is not set
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HZ_48 is not set
# CONFIG_I2C is not set
# CONFIG_IDE is not set
# CONFIG_HZ_48 is not set
# CONFIG_I2C is not set
# CONFIG_IDE is not set
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IRQ_CPU=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IRQ_CPU=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_VR41XX is not set
CONFIG_MIPS=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_BOSPORUS is not set
CONFIG_MIPS=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_BOSPORUS is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set
CONFIG_MTD_CFI=y
CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set
CONFIG_MTD_CFI=y
# CONFIG_MTD_SLRAM is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_NET_PCI is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_NET_PCI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CT_ACCT=y
+# CONFIG_NF_NAT_AMANDA is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+CONFIG_NF_NAT_SIP=m
+# CONFIG_NF_NAT_TFTP is not set
CONFIG_NODES_SHIFT=6
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
CONFIG_NODES_SHIFT=6
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PHYLIB=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PHYLIB=y
# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNPACPI is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_STB810 is not set
# CONFIG_PRISM54 is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_RTC is not set
# CONFIG_PRISM54 is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_RTC is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SWAP_IO_SPACE=y
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SWAP_IO_SPACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_TRAD_SIGNALS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_USB is not set
CONFIG_TRAD_SIGNALS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_USB is not set
-# CONFIG_YENTA is not set
+CONFIG_ZONE_DMA=y
+CONFIG_ZONE_DMA_FLAG=1
}
void __init arch_init_irq(void) {
}
void __init arch_init_irq(void) {
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
void __init prom_init(void)
{
void __init prom_init(void)
{
- prom_printf("\nLINUX running...\n");
ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
ar7_init_env((struct env_var *)fw_arg2);
console_config();
ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
ar7_init_env((struct env_var *)fw_arg2);
console_config();
static void ar7_machine_restart(char *command)
{
static void ar7_machine_restart(char *command)
{
- volatile u32 *softres_reg = (u32 *)ioremap(AR7_REGS_RESET +
+ volatile u32 *softres_reg = (u32 *)ioremap(AR7_REGS_RESET +
- prom_printf("Reboot\n");
- *softres_reg = 1;
}
static void ar7_machine_halt(void)
{
}
static void ar7_machine_halt(void)
{
{
volatile u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
u32 power_state = *power_reg | (3 << 30);
{
volatile u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
u32 power_state = *power_reg | (3 << 30);
- prom_printf("Power off\n");
- *power_reg = power_state;
+ *power_reg = power_state;
#include <linux/types.h>
#include <linux/cdev.h>
#include <linux/types.h>
#include <linux/cdev.h>
#define DRVNAME "ar7_gpio"
#define LONGNAME "TI AR7 GPIOs Driver"
#define DRVNAME "ar7_gpio"
#define LONGNAME "TI AR7 GPIOs Driver"
#include <linux/leds.h>
#include <linux/err.h>
#include <asm/io.h>
#include <linux/leds.h>
#include <linux/err.h>
#include <asm/io.h>
#define DRVNAME "ar7-leds"
#define LONGNAME "TI AR7 LEDs driver"
#define DRVNAME "ar7-leds"
#define LONGNAME "TI AR7 LEDs driver"
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <asm/ar7/ar7.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <asm/ar7/ar7.h>
MODULE_AUTHOR("Eugene Konev");
MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
MODULE_AUTHOR("Eugene Konev");
MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
#ifndef _ASM_AR7_SPACES_H
#define _ASM_AR7_SPACES_H
#ifndef _ASM_AR7_SPACES_H
#define _ASM_AR7_SPACES_H
#define CAC_BASE 0x80000000
#define IO_BASE 0xa0000000
#define UNCAC_BASE 0xa0000000
#define CAC_BASE 0x80000000
#define IO_BASE 0xa0000000
#define UNCAC_BASE 0xa0000000
* We handle pages at KSEG0 for kernels with 32 bit address space.
*/
#define PAGE_OFFSET 0x80000000UL
* We handle pages at KSEG0 for kernels with 32 bit address space.
*/
#define PAGE_OFFSET 0x80000000UL
-#define ARCH_PFN_OFFSET (0x14000000 >> PAGE_SHIFT)
+#define PHYS_OFFSET 0x14000000UL
/*
* Memory above this physical address will be considered highmem.
/*
* Memory above this physical address will be considered highmem.