# CONFIG_NTFS_RW is not set
# CONFIG_NVRAM is not set
# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
# CONFIG_OCF_EP80579 is not set
# CONFIG_OCF_HIFNHIPP is not set
# CONFIG_OCF_HIFN is not set
# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
# CONFIG_OCF_OCF is not set
# CONFIG_OCF_OCFNULL is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_NVRAM is not set
# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
# CONFIG_OCF_EP80579 is not set
# CONFIG_OCF_HIFNHIPP is not set
# CONFIG_OCF_HIFN is not set
# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
# CONFIG_OCF_OCF is not set
# CONFIG_OCF_OCFNULL is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_NVRAM is not set
# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
# CONFIG_OCF_EP80579 is not set
# CONFIG_OCF_HIFNHIPP is not set
# CONFIG_OCF_HIFN is not set
# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
# CONFIG_OCF_OCF is not set
# CONFIG_OCF_OCFNULL is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_NVRAM is not set
# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
# CONFIG_OCF_EP80579 is not set
# CONFIG_OCF_HIFNHIPP is not set
# CONFIG_OCF_HIFN is not set
# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
# CONFIG_OCF_OCF is not set
# CONFIG_OCF_OCFNULL is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_NVRAM is not set
# CONFIG_OC_ETM is not set
# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
# CONFIG_OCF_EP80579 is not set
# CONFIG_OCF_HIFNHIPP is not set
# CONFIG_OCF_HIFN is not set
# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
# CONFIG_OCF_OCF is not set
# CONFIG_OCF_OCFNULL is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_NVRAM is not set
# CONFIG_OC_ETM is not set
# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
# CONFIG_OCF_EP80579 is not set
# CONFIG_OCF_HIFNHIPP is not set
# CONFIG_OCF_HIFN is not set
# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
# CONFIG_OCF_OCF is not set
# CONFIG_OCF_OCFNULL is not set
# CONFIG_OCFS2_FS is not set
+++ /dev/null
-2008-09-18 01:27 davidm
-
- * Makefile, README, README.sglinux,
- patches/linux-2.6.26-natt.patch, patches/linux-2.6.26-ocf.patch,
- patches/openssl-0.9.8g.patch, patches/openssl-0.9.8i.patch:
-
- Updates for a new OCF release with openssl-0.9.8i and linux-2.6.26
- support.
-
-2008-09-18 00:19 davidm
-
- * Config.in, Kconfig, Makefile, ep80579/Makefile,
- ep80579/environment.mk, ep80579/icp_asym.c, ep80579/icp_common.c,
- ep80579/icp_ocf.h, ep80579/icp_sym.c,
- ep80579/linux_2.6_kernel_space.mk:
-
- A new driver from Intel for their Intel QuickAssist enabled EP80579
- Integrated Processor Product Line.
-
- Adrian Hoban Brad Vrabete
-
-
-2008-07-25 01:01 gerg
-
- * ocf-compat.h:
-
- From linux-2.6.26 onwards there is now a linux/fdtable.h include
- that contains the file_fdtable() definition.
-
-2008-07-05 01:20 davidm
-
- * Makefile, patches/linux-2.6.25-natt.patch,
- patches/linux-2.6.25-ocf.patch:
-
- A new ocf-linux release and some patches to send to the OS guys.
-
-2008-07-03 21:21 davidm
-
- * crypto.c:
-
- Clean up a some possible deadlock/busy wait issues with
- locking/sleeping. This has greatly improved openswan 2.6.14
- reliability ;-)
-
- Make more of our state available in /sys for debugging.
-
-2008-06-23 20:38 davidm
-
- * Config.in, Kconfig:
-
- Some settings should be bool's John Gumb
-
-2008-05-28 03:43 philipc
-
- * ixp4xx/ixp4xx.c: Revert previous checkin since the
- callbacks are meant to complete the crypto request. Before
- reverting this, CONFIG_DEBUG_SLAB gives: slab error in
- verify_redzone_free(): cache `ixp4xx_q': double free detected when
- trying to ssh to the device.
-
-2008-04-27 19:31 davidm
-
- * ixp4xx/ixp4xx.c:
-
- We were not completing a crypto request under some error
- conditions.
-
-2008-04-02 01:51 davidm
-
- * talitos/talitos.c:
-
- This patch is for crypto/ocf/talitos for use on linux 2.6.23. It
- is applied to the ocf-linux-20071215 release.
-
- Signed-off-by: Lee Nipper
-
-2008-02-29 00:43 davidm
-
- * crypto.c, ocf-compat.h, ixp4xx/ixp4xx.c:
-
- freshen up the 2.4 support, some recent OCF changes and openswan
- changes are not that old-os friendly.
-
- Force OCF to select HW/SW, otherwise it may get stuck on the first
- device. This change means we will favour HW over SW, but we will
- use both as required. Passing in a crid of 0 to crypto_newsession
- effectively meant we were stuck on the first device registered with
- OCF, not good. This only applied to ipsec, cryptodev already did
- the right thing.
-
-2008-01-31 07:37 gerg
-
- * hifn/hifn7751.c:
-
- The linux-2.6.24 modules build fails if the pci ID table doesn't
- have a NULL entry at the end. So add one.
-
-2008-01-29 09:16 gerg
-
- * cryptosoft.c, ocf-compat.h:
-
- Added some compatability macros for scatterlist changes from 2.6.24
- onwards.
-
-2007-12-16 07:31 davidm
-
- * Makefile:
-
- missed an openssl patch name change
-
-2007-12-16 07:27 davidm
-
- * Makefile, README, README.sglinux, patches/linux-2.6.23-ocf.patch,
- patches/openssl-0.9.8e.patch, patches/openssl-0.9.8g.patch,
- patches/ssl.patch:
-
- updates for a new ocf release and associated bits
-
-2007-12-16 06:36 davidm
-
- * crypto.c:
-
- Be very careful what you do while potentially in an driver unload
- state or we will call through NULL pointers.
-
- Reported by Nawang Chhetan .
-
-2007-12-14 22:32 davidm
-
- * cryptodev.c:
-
- Add in an unlock_ioctl when available to help SMP systems a lot.
- Otherwise all ioctls get a BKL :-(
-
- Problem found by Egor N. Martovetsky
-
-2007-12-14 18:29 davidm
-
- * cryptosoft.c:
-
- reformat the alg table to make it easier to read.
-
-2007-12-14 18:29 davidm
-
- * crypto.c:
-
- Fix more driver locking/sleeping bugs report by Nawang Chhetan
-
-
-2007-12-12 21:36 davidm
-
- * Config.in, Kconfig, Makefile, pasemi/Makefile, pasemi/pasemi.c,
- pasemi/pasemi_fnu.h:
-
- Here I'm including my PA Semi driver patch to OCF. Please consider
- it for inclusion into next OCF release.
-
- Egor N. Martovetsky
-
-2007-12-05 00:37 davidm
-
- * patches/: linux-2.4.35-ocf.patch, linux-2.6.22-ocf.patch:
-
- More correct count setting if we get a signal
-
- Adrian Hoban
-
-2007-12-05 00:02 davidm
-
- * random.c:
-
- OCF has a static array for holding random data. The random number
- generator I have can write directly into physically contiguous
- memory. Static memory comes from the heap and isn't physically
- contiguous. I could use kmalloc'd memory and then copy into the OCF
- static buf but I'd like to avoid a memory copy. The following patch
- (Physically_Contig_Rand.patch) allows me to avoid a memory copy and
- should not impact the other OCF drivers:
-
- Adrian Hoban
-
-2007-12-05 00:01 davidm
-
- * Kconfig:
-
- Fix a typo in the Kconfig
-
-2007-11-23 19:15 davidm
-
- * talitos/talitos_dev.h:
-
- fix the DPRINTF macro so that it actually compiles.
-
-2007-11-22 19:41 davidm
-
- * ocf-compat.h, talitos/talitos.c, talitos/talitos_dev.h:
-
- Various updates to get talitos compiling and work on real-world (ie
- ubuntu) kernels.
-
-2007-11-08 02:21 davidm
-
- * crypto.c:
-
- keep and eye on us being completely blocked. If we have Q's to
- process, but all the requests are blocked, sleep. We do not want
- to busy loop until a driver unblocks as it uses valuable CPU
- resources that could be doing something much more important ;-)
-
-2007-11-07 19:04 davidm
-
- * hifn/hifn7751.c:
-
- hifn driver was failing to unblock itself under some "out of
- resources" conditions. It would return ERESTART to signal it was
- full but never call crypto_unblock to start things moving again.
-
-2007-11-06 02:09 davidm
-
- * hifn/hifn7751.c:
-
- Remove some bogus trace left in the driver for the overflow (too
- busy) case.
-
-2007-10-12 21:10 gerg
-
- * crypto.c, ixp4xx/ixp4xx.c:
-
- Fix up use of kmem_cache_create() - it takes one less argument in
- 2.6.23 onwards.
-
-2007-10-03 02:41 gerg
-
- * ixp4xx/Makefile:
-
- The directory locations for includes in CSR-2.4 is different. Need
- to modify the CFLAGS accordingly if using CSR-2.4.
-
-2007-09-22 00:39 philipc
-
- * ixp4xx/Makefile: linux 2.4 make dep was failing. This is
- a quick fix to get it building, need to double check this.
-
-2007-09-19 00:13 mmccreat
-
- * Config.in: Add config option CONFIG_OCF_IXP4XX_SHA1_MD5,
- that enables SHA1 and MD5 hashing to be done by the IXP4xx crypto
- accelerator (although it is much slower than using cryptosoft).
-
-2007-09-18 21:45 mmccreat
-
- * Makefile, random.c: - Force the inclusion of autoconf.h,
- which contains #defines for CONFIG_xxx options for OCF. -
- Removing additional -D option, now that we are including the
- CONFIG_xxx #defines.
-
-2007-09-18 21:44 mmccreat
-
- * Kconfig: Add config option CONFIG_OCF_IXP4XX_SHA1_MD5,
- that enables SHA1 and MD5 hashing to be done by the IXP4xx crypto
- accelerator (although it is much slower than using cryptosoft).
-
-2007-09-18 21:37 mmccreat
-
- * cryptodev.h: The CRYPTO_MAX_DATA_LEN limit should be
- 0xFFFF ie 64K - 1.
-
-2007-09-18 21:19 mmccreat
-
- * ixp4xx/ixp4xx.c: - Rework the code so that the correct IXP
- function, ixCryptoAccHashPerform(), is used to calculate SHA1 and
- MD5 hashes. NB: The performance of using the IXP4xx hardware is
- really, really poor compared to using cryptosoft (and the kernel
- crypto). - Only support SHA1 and MD5 hashing if the
- CONFIG_OCF_IXP4XX_SHA1_MD5 is enabled.
-
-2007-08-30 21:42 davidm
-
- * Makefile:
-
- do not archive build files in the crypto-tools archive
-
-2007-08-22 19:19 mmccreat
-
- * cryptodev.c: Fix up the checking for key lengths, when the
- key can be of unlimited size.
-
-2007-08-16 01:50 davidm
-
- * Makefile:
-
- Better 2.4 compat for "make dep" now working with fastdep.
-
-2007-07-28 08:25 davidm
-
- * Makefile, README, README.sglinux, patches/crypto-tools.patch,
- patches/linux-2.4.29-ocf.patch, patches/linux-2.4.35-ocf.patch,
- patches/linux-2.6.11-ocf.patch, patches/linux-2.6.22-ocf.patch,
- patches/ssl.patch:
-
- Update all the patches and put the patch making target back into
- the Makefile.
-
-2007-07-28 08:25 davidm
-
- * hifn/hifn7751.c:
-
- fix an unused variable warning when HARVESTING is disabled
-
-2007-07-27 21:33 davidm
-
- * hifn/hifn7751.c, ixp4xx/ixp4xx.c, safe/safe.c, talitos/talitos.c:
-
-
- Remove all the random code if OCF does not have radom harvesting
- enabled.
-
-2007-07-26 00:36 davidm
-
- * Kconfig, hifn/hifnHIPP.c, hifn/hifnHIPPvar.h:
-
- Changes to get the hifn HIPP stub driver to build.
-
-2007-07-25 21:25 davidm
-
- * Makefile, hifn/Makefile, hifn/hifnHIPP.c, hifn/hifnHIPPreg.h,
- hifn/hifnHIPPvar.h, ixp4xx/Makefile, ocfnull/Makefile,
- safe/Makefile, talitos/Makefile:
-
- Bring in the hifnHIPP driver written by Xelerance. This is the
- super hifn chip with full protocol offload.
-
- Switch to much more traditional Makefile/subdir building. The
- Makefiles are nicer now, but still not beautiful, 2.6 and 2.4
- capable builds result in a certain amount of uglyiness.
-
-2007-07-24 21:46 davidm
-
- * cryptodev.c:
-
- Clean up all the driver id checking and session management so
- adding/removing drivers all continues to run cleanly.
-
-2007-07-24 20:14 davidm
-
- * talitos/talitos.c:
-
- From: Ahsan Kabir
-
- less than .1% packet corruption was detected using the talitos
- driver. It turns out we don't need the cipher iv out len/ptr field
- to do ESP IPsec. Therefore we set the len field as 0, which tells
- the SEC not to do anything with this len/ptr field.
-
- Signed-off-by: Ahsan Kabir
- Signed-off-by: Kim Phillips
-
-2007-07-24 08:25 davidm
-
- * cryptosoft.c, ocf-bench.c, hifn/hifn7751.c, ixp4xx/ixp4xx.c,
- safe/safe.c, talitos/talitos.c:
-
- Switch the remaining GFP_ATOMIC to the newer and not deprecated
- SLAB_ATOMIC
-
-2007-07-23 22:16 mmccreat
-
- * ixp4xx/ixp4xx.c: Add missing ";" from end of dprintk()
- call!
-
-2007-07-21 01:16 davidm
-
- * ocf-compat.h, rndtest.c, hifn/hifn7751.c, safe/safe.c:
-
- pci_register_driver is nothing like it is depending on the kernel,
- so we need a compat function to fix it up for all kernels before
- 2.6.10, and in different ways for older and not so older versions.
-
-2007-07-20 21:54 davidm
-
- * safe/safe.c:
-
- Make the debug macro ';' safe so you do not get compiler warnings
-
-2007-07-20 21:53 davidm
-
- * talitos/: talitos.c, talitos_dev.h, talitos_soft.h:
-
- update to the latest FreeBSD driver structure and fix up the code
- as required.
-
-2007-07-20 03:07 davidm
-
- * rndtest.c:
-
- more headers needed to compile on 2.4
-
-2007-07-20 03:00 davidm
-
- * cryptosoft.c:
-
- Put in the 2.4 stubs to support compression
-
-2007-07-20 02:53 davidm
-
- * crypto.c, ocf-compat.h:
-
- move some more compat stuff into the compat header.
-
-2007-07-20 02:47 davidm
-
- * talitos/talitos.c:
-
- support of_platform_driver for newer, ARCH=powerpc based kernels.
- Signed-off-by: Kim Phillips
-
-2007-07-20 02:46 davidm
-
- * talitos/talitos.c:
-
- From: Ahsan Kabir
-
- When Talitos completes job both the channel and execution unit are
- capable of generating interrupts. Talitos used to take two
- interrupts per request - one for channel completion and the other
- for execution unit completion. This patch ensures that Talitos
- takes interrupt only for channel completion. Execution unit will
- generate interrupt only when there is error and the error
- interrupts for execution units are not masked.
-
- Signed-off-by: Ahsan Kabir
- Signed-off-by: Kim Phillips
-
-2007-07-20 02:37 davidm
-
- * cryptodev.c:
-
- Unless the user specifies, select from both HW and SW.
-
- Clean up some debug to report the actual ioctl name.
-
- Compiler warning on newer compilers.
-
-2007-07-20 02:35 davidm
-
- * cryptodev.h:
-
- moved dprintk to the compat code, seemed nicer in there.
-
-2007-07-20 02:35 davidm
-
- * rndtest.c:
-
- Need to clean up some warnings etc, more includes
-
-2007-07-20 02:34 davidm
-
- * ocf-compat.h, hifn/hifn7751.c, safe/safe.c:
-
- new shared IRQ flags for 2.6.22 and a safer version of the debug
- macro
-
-2007-07-20 00:52 davidm
-
- * cryptosoft.c:
-
- Implement compression based on the code from the openswan guys.
-
-2007-07-20 00:52 davidm
-
- * criov.c:
-
- Fix compiler warning on non-value returning void func.
-
-2007-07-18 22:55 davidm
-
- * hifn/hifn7751.c, safe/safe.c:
-
- Use pci_register_driver rather than pci_module_init.
- pci_module_init has been dropped in 2.6.22 yet pci_register_driver
- has always existed and used to do some crazy hotplug junk.
-
-2007-07-18 21:55 gerg
-
- * ixp4xx/ixp4xx.c:
-
- Added a missing ";" at the end of the ixp_kproces() prototype. It
- is IXP465 specific, only showed up when generateing for SG720.
-
-2007-07-17 00:37 davidm
-
- * Makefile, cryptodev.c, random.c, rndtest.c, hifn/hifn7751.c,
- ocfnull/ocfnull.c, safe/safe.c:
-
- Fixup all the debug support for 2.4 kernels, clean up the entropy
- harvester to be far more robust.
-
-2007-07-14 02:19 davidm
-
- * talitos/talitos.c:
-
- Old patch that had not been applied Kim Phillips
-
-
-2007-07-14 01:12 davidm
-
- * Config.in, Kconfig, Makefile, cryptodev.c, cryptodev.h, random.c,
- syscall.h:
-
- Finally ditched all the syscall stuff. You can now enable/disable
- the random harvestor. Pulled in most of random.c from openswan
- project and fixed some obvious bugs (that were always there).
-
-2007-07-13 21:59 davidm
-
- * ocf-compat.h:
-
- Better error printing and checking for drivers
-
-2007-07-13 21:56 davidm
-
- * cryptosoft.c:
-
- Fix some incorrect debug (reporting wrong error type)
-
-2007-07-13 21:55 davidm
-
- * hifn/hifn7751.c, safe/safe.c:
-
- Make the code more similar to Free-BSD by reverting to the same
- debug macros
-
-2007-07-13 21:53 davidm
-
- * ocfnull/ocfnull.c:
-
- Fix up the null driver to work again in the new framework.
-
-2007-07-06 23:54 mmccreat
-
- * cryptodev.c, cryptodev.h, cryptosoft.c: - Update OCF to
- work with new Crypto API introduced in 2.6.19 kerneli, and add
- macros so it work with older kernels. - Add support for SHA256,
- SHA384 and SHA512 HASH and HMAC algorithms. - Cryptosoft: Only
- register algorithms that the kernel has implementations for.
-
-2007-07-03 19:52 davidm
-
- * Kconfig, README, README.sglinux, criov.c, crypto.c, cryptodev.c,
- cryptodev.h, cryptosoft.c, ocf-bench.c, ocf-compat.h, random.c,
- rndtest.c, uio.h, hifn/hifn7751.c, hifn/hifn7751reg.h,
- hifn/hifn7751var.h, ixp4xx/ixp4xx.c, ocfnull/ocfnull.c,
- safe/safe.c, safe/safevar.h, talitos/talitos.c:
-
- Updated OCF to the lastest FreeBSD version.
-
- There was a lot of change in here, some of which will help FIP's,
- some which won't.
-
- Did lots of cleaning and diff reduction against the freebsd code.
- Still more cleaning to do.
-
-2007-06-01 21:58 gerg
-
- * Config.in:
-
- Put the regular old Config.in back, needed for puclic releases.
-
-2007-06-01 21:58 gerg
-
- * Kconfig:
-
- Change the CONFIG_OCF_IXP400 dependencies to be the same as they
- where in the Config.in file.
-
-2007-05-28 21:40 gerg
-
- * Config.in, Kconfig:
-
- Switch all module configuration over to new style Kconfigs.
-
-2007-05-24 18:49 davidm
-
- * cryptodev.c, random.c:
-
- Work around some problems on redhat systems with errno redefinition
-
-2007-04-30 21:09 gerg
-
- * cryptosoft.c:
-
- The CRYPTO_TFM_MODE_ family of defines no longer exists from 2.6.21
- onwards. As far as I can tell you don't need to pass it to the
- crypto_alloc_tfm() function anymore.
-
- So define it to be 0 if it doesn't exist.
-
-2007-04-03 02:13 gerg
-
- * syscall.h:
-
- Added syscall macros for SH architecture. Just temporary, 'till
- Dave fixes the OCF code to not use syscalls from the modules :-)
-
-2007-02-16 23:10 davidm
-
- * syscall.h:
-
- ensure the temprary 2.6 fix doesn't break 2.4
-
-2007-02-07 22:23 gerg
-
- * cryptodev.c, random.c, syscall.h:
-
- Temporary fix for new 2.6 kernels no longer defining in-kernel
- system call functions. Define them locally for now until we fix
- properly.
-
-2007-02-07 03:10 gerg
-
- * ixp4xx/ixp4xx.c:
-
- Changes to support the different INIT_WORK() mechanism from kernels
- 2.6.20 onwards.
-
-2007-02-06 02:38 gerg
-
- * crypto.c:
-
- Cleaned up use of kmem_cache_t and use of SLAB_ATOMIC.
-
-2006-12-05 20:50 cpascoe
-
- * hifn/hifn7751.c, safe/safe.c, talitos/talitos.c:
-
- Remove pt_regs from OCF interrupt handlers for 2.6.19+
-
-2006-12-02 03:36 gerg
-
- * criov.c, crypto.c, cryptodev.c, cryptosoft.c, ocf-bench.c,
- random.c, rndtest.c, hifn/hifn7751.c, ixp4xx/ixp4xx.c,
- ocfnull/ocfnull.c, safe/safe.c, talitos/talitos.c:
-
- Can no longer include linux/config.h as of 2.6.19 kernels. Need to
- conditionally include it based on AUTOCONF_INCLUDED not being
- defined.
-
-2006-10-13 21:52 cpascoe
-
- * random.c:
-
- Remove another race condition that may result in us running more
- than one random thread if modules are reloaded during heavy system
- load.
-
-2006-10-13 21:18 cpascoe
-
- * random.c:
-
- - Permit delivery of SIGKILL to the random thread. - Do not exit
- prematurely if poll() is interrupted. - Improve exit conditions so
- that we quit immediately, rather than loop infinitely, if the
- last RNG source is removed while we are trying to fill our
- buffer.
-
-2006-10-03 20:28 cpascoe
-
- * crypto.c, crypto.c: AutoMerged
- >
- > Zero the empty half of "new driver" buffer, and not past the end
- of the old
- > buffer that we are about to free.
-
-2006-10-03 20:28 cpascoe
-
- * crypto.c:
-
- Zero the empty half of "new driver" buffer, and not past the end of
- the old buffer that we are about to free.
-
-2006-08-25 23:57 davidm
-
- * cryptosoft.c:
-
- Do not print errors for failed ALG requests unless debugging
-
-2006-07-14 21:44 davidm
-
- * cryptodev.h:
-
- 2.6.11 and earlier did not have the files_fdtable macro.
-
-2006-06-21 21:26 gerg
-
- * cryptodev.h, hifn/hifn7751.c, ocfnull/ocfnull.c, safe/safe.c,
- talitos/talitos.c:
-
- Fixed up more occurrances of MODULE_PARM() needing to be converted
- to module_param() (as of 2.6.17 and onwards).
-
-2006-06-21 00:28 gerg
-
- * cryptosoft.c:
-
- Change use of MODULE_PARM to module_param() for 2.6.17+ kernels.
-
-2006-06-20 22:13 gerg
-
- * crypto.c, cryptodev.c, cryptodev.h, ocf-bench.c, ixp4xx/ixp4xx.c:
-
-
- As of 2.6.17 and onwards module_param is used in place of
- MODULE_PARM.
-
-2006-06-06 00:31 gerg
-
- * Makefile:
-
- Fix Makefile to find includes is using CSR-2.1.
-
-2006-05-31 01:44 gerg
-
- * cryptodev.h:
-
- The vars "crypto_usercrypto", "crypto_userasymcrypto" are declared
- as extern in the header file, but static in the c file. I guessed
- that they should probably be truely static, so removed the extern
- declarations from the header.
-
-2006-05-25 21:06 davidm
-
- * talitos/talitos.c:
-
- This fixes a situation that I never provably experienced, where a
- descriptor in memory may be reserved within the proper lock, and
- freed immediately after, only for a few cycles, right outside the
- lock. Kim Phillips
-
-2006-05-15 19:49 davidm
-
- * criov.c, crypto.c, cryptodev.c, cryptodev.h, cryptosoft.c,
- ocf-bench.c, random.c, rndtest.c, uio.h, ixp4xx/ixp4xx.c:
-
- Remove the "all rights reserved" from the Intel copyrights.
-
-2006-05-12 21:19 davidm
-
- * Config.in, Kconfig, Makefile, cryptodev.c, ocf-bench.c,
- ocfnull/ocfnull.c:
-
- Add in a null OCF driver that does nothing at all, useful for
- measuring the cost of various parts of the ipsec stack.
-
-2006-05-12 21:17 davidm
-
- * ixp4xx/ixp4xx.c:
-
- make sure we do not overwrite a correctly set error type.
-
-2006-05-12 06:52 davidm
-
- * crypto.c:
-
- Fix a problem where a driver would return ERESTART (full) but then
- unblock itself before the upper layer had marked it as blocked.
- This caused the code to get stuck in crypto_proc and process no
- more requests.
-
-2006-05-12 06:47 davidm
-
- * cryptosoft.c:
-
- Implement CRD_F_KEY_EXPLICIT for cryptosoft so keys can be changed
- on an active session.
-
-2006-05-10 20:09 davidm
-
- * README, criov.c, crypto.c, cryptodev.h, cryptosoft.c,
- ocf-bench.c, random.c, rndtest.c, uio.h, hifn/hifn7751.c,
- ixp4xx/ixp4xx.c, safe/safe.c, safe/safevar.h:
-
- update email addresses and other house cleaning
-
-2006-05-10 20:08 davidm
-
- * cryptodev.c:
-
- pull in better error checking from openswan modifications
-
-2006-05-10 19:11 davidm
-
- * cryptosoft.c:
-
- Fix an unused variable warning when various options are disabled.
-
-2006-05-10 19:10 davidm
-
- * cryptodev.h:
-
- Add support for 2.4 kernels for the new FD cloning operation
-
-2006-05-09 19:48 davidm
-
- * hifn/hifn7751.c:
-
- remove the hifn 7855 support, this driver will never work with
- that chip.
-
-2006-05-08 23:34 davidm
-
- * hifn/hifn7751var.h:
-
- Contiguous buffer support so that ocf-bench can run properly.
-
-2006-05-05 23:21 davidm
-
- * hifn/hifn7751.c:
-
- Add in contiguous buffer support so that ocf-bench and run on the
- driver.
-
-2006-05-05 23:14 davidm
-
- * ocf-bench.c:
-
- Our requests were out of order, need to do crypto then auth on
- encrypt requests. Some drivers enforce this.
-
-2006-05-04 23:21 davidm
-
- * crypto.c:
-
- Do not run "newsession" with lock, since newsession may sleep on
- some targets. Handle the accounting so that things are not pulled
- from underneath us.
-
-2006-05-04 23:20 davidm
-
- * cryptodev.c:
-
- Switch to a less optimal (marginally) solution for creating a new
- fd that appears to work in far more versions of the kernel
- including 64bit versions.
-
-2006-05-04 18:54 davidm
-
- * ocf-bench.c:
-
- Turn off the IXP access lib benchmarking by default as most people
- don't have it.
-
- Paul Wouters
-
-2006-04-01 08:23 davidm
-
- * Makefile:
-
- Remove more temp files when cleaning
-
-2006-04-01 08:12 davidm
-
- * hifn/hifn7751reg.h:
-
- 7855 PCI id's as yet untested
-
-2006-04-01 08:08 davidm
-
- * hifn/hifn7751.c:
-
- add PCI id's for the 7855 and AES support, card is untested still
- as it requires 128MB of PCI memory !
-
-2006-03-31 08:38 davidm
-
- * README.sglinux:
-
- small update to instructions with corrected patch name
-
-2006-03-31 00:23 davidm
-
- * Config.in:
-
- Add the Talitos driver to the 2.4 config, even though it probably
- won't compile.
-
-2006-03-30 07:48 davidm
-
- * Kconfig, Makefile, talitos/talitos.c, talitos/talitos_dev.h,
- talitos/talitos_soft.h:
-
- Please find attached the freescale SEC driver for OCF. It's been
- (most recently) tested on an SEC2.0 based MPC8541E
- (cryptographically identical to the MPC8555E) under 2.6.15.2, with
- openssl-0.9.8a and openswan-2.4.3 (2.4.5rc5 won't keep the security
- association up for me for some reason).
-
- Please feel free to add it to your next release of OCF-Linux :-)
-
- Kim Phillips
-
-2006-03-20 19:34 davidm
-
- * safe/: safe.c, safevar.h:
-
- Safenet 1141 v1.0 chips have a DMA lockup error if you access the
- chip while DMA'ing. As a work around you need to limit your DMA to
- 256 byte chunks using scatter/gather descriptors. All the SG/SME
- products have v1.0 chips and would lockup with more than two
- outstanding packets at one time.
-
- Fix the KASSERT macro
-
- Add some more exhaustive initialisation.
-
-2006-03-15 21:58 davidm
-
- * cryptodev.h, random.c:
-
- Switch random support to "ints" since that is what the kernel uses
- and not using the same thing is 64bit wise a bad idea.
-
- Fix FIP's code to ensure correct amount of data is passed in.
-
- Add work around for broken 64bit OS RNG support (disable it)
-
- General code cleanups.
-
-2006-03-15 21:55 davidm
-
- * hifn/hifn7751.c:
-
- Fixes for 64bit OS's, make sure PCI address are within bus space,
- make sure we order writes to the bus so that chip functions
- correctly. Some small cleanups.
-
-2006-03-15 21:48 davidm
-
- * hifn/hifn7751var.h:
-
- Remove unused field from structure
-
-2006-03-15 21:47 davidm
-
- * safe/safe.c:
-
- Make the code more 64bit OS compatible, force PCI address space
- and so on.
-
-2006-03-09 20:42 davidm
-
- * ixp4xx/ixp4xx.c:
-
- If we call ixpCryptoAccInit() and it fails, just assume that it
- has already been called. This allows our "rc" scripts to be
- openswan and freeswan compatible ore easily.
-
-2006-02-28 23:21 davidm
-
- * README:
-
- generalise it a bit so rel-dates don't get in the way
-
-2006-02-28 01:52 davidm
-
- * README, patches/ssh.patch, patches/ssl.patch:
-
- Updated the README and patches for a release
-
-2006-02-25 09:21 davidm
-
- * README, README.sglinux:
-
- updates for a new release of OCF, ssl patches and so on.
-
-2006-02-25 08:44 davidm
-
- * crypto.c:
-
- We were calling the "process"routines with interrupts disabled. I
- can see no good reason for this and it provokes badness warnings in
- 2.6 under some conditions.
-
- I am going to run with the Q's unlocked for processing, and
- hopefully it will allow the system to be more responsive. It
- hasn't affected ipsec throughput in any way. Userland throughput
- (multi threaded) may have improved significantly though, but it
- needs more testing.
-
-2006-02-24 23:32 davidm
-
- * cryptodev.c:
-
- Whoa, set the segments with uninitted values can't be good. Clean
- out the rest of the old code that was accidently left in.
-
-2006-02-22 01:02 davidm
-
- * cryptodev.c:
-
- Still not sure about this one, but this is working for all the
- cases I can see so far. If it gets weird, I am going to switch to
- a simple clone and chain the sessions rather than a new fcr per fd.
-
-2006-02-20 22:12 davidm
-
- * cryptodev.c:
-
- Error handling case could free data that was not allocated
-
- Ronen Shitrit Marvell Semiconductor Israel
- Ltd
-
-2006-02-20 21:57 davidm
-
- * cryptosoft.c:
-
- Proper SHA/MD5 (non hmac) implementation, remove some retrictions
- for hashes (which only applied to crypto) and fix over zealous
- error checking.
-
- Ronen Shitrit Marvell Semiconductor Israel
- Ltd
-
-2006-02-09 21:15 davidm
-
- * cryptodev.c:
-
- The code wasn't quite right and needed some fixing for proper file
- accounting.
-
-2006-01-24 20:08 davidm
-
- * crypto.c, cryptodev.c, hifn/hifn7751.c:
-
- We implement our own open in the CRIOGET ioctl now which does
- pretty much the same thing as the BSD version, rather than use an
- open system call which gets caught out by chroot.
-
-2006-01-06 00:42 gerg
-
- * cryptosoft.c:
-
- Moved "{" block marker inside the set of
- "defined(CONFIG_CRYPTO_HMAC) || defined(CONFIG_CRYPTO_HMAC_MODULE)"
- code (in function swcr_process) so that it compiled if these where
- not defined.
-
-2005-11-11 01:44 davidm
-
- * Makefile, README:
-
- cleanups for a general release of OCF
-
-2005-11-11 01:18 davidm
-
- * patches/ssl.patch:
-
- Updated the ssl patch to the latest and greatest changed we have
- made.
-
-2005-11-10 21:41 davidm
-
- * Makefile, ixp4xx/ixp4xx.c:
-
- Better debug for bad input.
-
- Have make clean do more cleaning and less talking.
-
-2005-11-03 20:53 davidm
-
- * cryptosoft.c:
-
- clean up some compilation errors with various options on/off
-
-2005-10-25 00:25 davidm
-
- * Makefile:
-
- Add a patch target that generates full kernel patches to add OCF
- into either a 2.4 or 2.6 kernel as a single patch.
-
-2005-10-25 00:24 davidm
-
- * Kconfig:
-
- Make sure all OCF settings depend on OCF_OCF
-
-2005-09-23 02:45 davidm
-
- * README, README.sglinux:
-
- new crypto-tools archive to keep the tools up to date
-
-2005-09-23 02:08 davidm
-
- * Makefile, README, README.sglinux:
-
- updates for doing OCF releases
-
-2005-09-23 01:59 davidm
-
- * patches/: ssh.patch, ssl.patch:
-
- updated the patches for the latest in fixes etc to ssh/ssl for a
- new OCF release before the openswan 2.4.1 merge.
-
-2005-09-21 00:57 davidm
-
- * Makefile, cryptosoft.c, hifn/hifn7751.c, ixp4xx/ixp4xx.c:
-
- Fixes for building cleanly under 2.6
-
-2005-09-13 23:11 davidm
-
- * ocf-bench.c:
-
- Add an exit function for cleaner 2.6 support. Patch from Ronen
- Shitrit
-
-2005-07-30 00:23 davidm
-
- * cryptosoft.c:
-
- Add proper hooks for MD5/SHA and their HMAC countrparts processing
- from cryptodev.
-
-2005-07-29 01:50 davidm
-
- * cryptodev.c:
-
- cryptodev did not support MD5 and SHA1, only the HMAC versions
-
-2005-07-29 01:05 davidm
-
- * ixp4xx/ixp4xx.c:
-
- register for MD5, return 16 bytes for MD5 and 12 for MD5_HMAC,
- likewise for SHA1 (only 20 is not HMAC).
-
-2005-07-28 21:52 davidm
-
- * ixp4xx/ixp4xx.c:
-
- First pass fix of userland MD5 processing. We now do as well as
- the safenet does, I think.
-
-2005-07-27 06:23 davidm
-
- * cryptodev.c:
-
- udelay doesn't give up the current thread, thus the kernel will get
- locked if a process is killed but the hardware never completes the
- crypto request.
-
-2005-07-22 02:07 davidm
-
- * crypto.c, cryptodev.h:
-
- Implement queuing limits for input/output and OCF requests.
-
- Implement 2.6 style work queues instead of the 2.4 task_queues.
-
-2005-07-21 20:42 davidm
-
- * cryptodev.h, ocf-bench.c, ixp4xx/ixp4xx.c:
-
- Fix OCF to use work queues, add 2.4 version of work queues to
- cryptodev.h for use in ipsec and elsewhere.
-
- Problem and initial patch provided by David Vrabel
- . Cleaned up and 2.4 support added by me.
-
-2005-07-21 19:08 davidm
-
- * random.c:
-
- Fix spinlock initialisation, problem reported by Andy @
- windsorcarclub.co.uk.
-
-2005-07-20 20:24 davidm
-
- * cryptodev.c:
-
- fix a silly spelling mistake
-
-2005-07-08 00:56 gerg
-
- * Makefile:
-
- Only build ocf-bench when CONFIG_OCF_BENCH is acrually enabled.
-
-2005-06-27 20:29 davidm
-
- * ixp4xx/ixp4xx.c:
-
- Ok, we need a simple implentation here or we go too slow for UDP
- tests. For now, if the Q is full just ditch the packet, someone
- has to do it.
-
-2005-06-25 01:13 davidm
-
- * safe/safe.c:
-
- bytes swapping etc all seems wrong for safenet on BE, these fixes
- see both MD5 and SHA1 working with OpenSwan.
-
-2005-06-22 23:10 davidm
-
- * random.c:
-
- clean up some ifdef code a little
-
-2005-06-22 21:28 davidm
-
- * ixp4xx/ixp4xx.c:
-
- Make sure we do not call blocking functions from ISR callable
- routines. In this case we were calling ixCryptoAccCtxUnregister.
-
- Run all the random numbers through SHA1 process to ensure more
- uniform distribution of bits (NOTE: it is not more random in any
- way)
-
-2005-06-21 00:11 davidm
-
- * ixp4xx/ixp4xx.c:
-
- do not process requests from the register callback, gets the AES
- code all messed up.
-
- Align caches on HW cache boundaries ot improve speed.
-
- More tracking or potential errors.
-
-2005-06-15 01:55 davidm
-
- * ixp4xx/ixp4xx.c:
-
- technically ixCryptoAccCtxRegister cannot be called from IRQ
- context, so run it from the immediate BH.
-
-2005-06-14 23:13 davidm
-
- * ocf-bench.c:
-
- Fix some compile warnings/errors
-
-2005-06-14 20:52 davidm
-
- * Config.in, Kconfig, Makefile, ocf-bench.c:
-
- Add in kernel benchmark driver
-
- Support for building under CSR 1.4 and 2.0 is now complete
-
-2005-06-14 20:51 davidm
-
- * crypto.c:
-
- Do not use immediate processing for SW drivers otherwise we hold a
- lock for too long. Instead force BATCH processing.
-
- Problem found by David Vrabel
-
-2005-06-14 20:46 davidm
-
- * cryptodev.c:
-
- Fix up AES minimum key size
-
- Make some more variables static
-
-2005-06-14 20:36 davidm
-
- * ixp4xx/ixp4xx.c:
-
- Use kernel caches as they are more efficient and faster to obtain.
-
- Fix some spelling
-
- Tune PKE to only use the space required. Turn off go fast options
- to reduce any speed-related cracking.
-
- Only zero data that needs to be zeroed (save some cycles)
-
-2005-06-02 21:42 davidm
-
- * ixp4xx/ixp4xx.c:
-
- Added optimisations ideas from Intel the improve the PKE
- performance for 512 and 1024 bits operations.
-
-2005-06-01 02:13 davidm
-
- * ixp4xx/ixp4xx.c:
-
- Looks like I found the ixp bug. Using OSAL buffer routines on
- non-OSAL buffers is a very very bad thing to do. Must double check
- all the API's I am using (ie., PKE) just to be sure.
-
-2005-05-31 21:38 davidm
-
- * Config.in, Kconfig:
-
- Updated/Added the menu wrapper for the config options
-
-2005-05-31 21:18 gerg
-
- * Config.in:
-
- Reworked the config.in so that each sub-module has its own
- Config.in. That way it is easier to make release trees with some
- modules left in.
-
-2005-05-30 19:46 davidm
-
- * ixp4xx/ixp4xx.c:
-
- Not all the Pke code was appropriately ifdef'd
-
-2005-05-28 01:49 davidm
-
- * cryptosoft.c:
-
- We were not injecting data in the right places nor calling the
- cipher code the best was under all situations. We are now good
- enought to do ESP/AH processing with 3DES and SHA1-HMAC.
-
-2005-05-28 01:42 davidm
-
- * hifn/hifn7751.c:
-
- Non atomic kmallocs at IRQ time are bad and cause lockups
-
-2005-05-21 08:31 davidm
-
- * README, README.sglinux:
-
- Some small updates to email and patches that no longer exist
-
-2005-05-21 08:25 davidm
-
- * cryptosoft.c:
-
- better error message on failure, a lot of the error check we do
- sems to break apps like cryptotest, not sure who is right yet.
-
-2005-05-21 00:55 davidm
-
- * criov.c, crypto.c, cryptodev.c, cryptodev.h, cryptosoft.c,
- random.c, rndtest.c, uio.h, hifn/hifn7751.c, ixp4xx/ixp4xx.c,
- safe/safe.c, safe/safevar.h:
-
- Convert to CyberGuard email addresses for OCF files.
-
-2005-05-21 00:28 davidm
-
- * crypto.c, cryptodev.c, cryptosoft.c, hifn/hifn7751.c,
- ixp4xx/ixp4xx.c, safe/safe.c:
-
- final round of naming changes, hifn driver also confirmed working
- in SG710
-
-2005-05-20 23:50 davidm
-
- * cryptosoft.c, random.c, uio.h, ixp4xx/ixp4xx.c:
-
- more copyright/author updates etc for Intel
-
-2005-05-20 23:48 davidm
-
- * criov.c, crypto.c, cryptodev.c, cryptodev.h, cryptosoft.c,
- random.c, rndtest.c, uio.h, ixp4xx/ixp4xx.c, safe/safe.c,
- safe/safevar.h:
-
- updated copyrights to reflect Intels interest/investment in the
- project
-
-2005-05-20 20:31 davidm
-
- * hifn/: hifn7751.c, hifn7751var.h:
-
- Most of a working SKB implementation now
-
-2005-05-20 20:30 davidm
-
- * safe/: md5.c, md5.h, safe.c, sha1.c, sha1.h:
-
- Full AH/ESP processing now working, just added BSD sha/md5
- routines as needed for now.
-
-2005-05-20 20:30 davidm
-
- * random.c:
-
- use the new BSD rndtest code rather than the old GPL fips code
-
-2005-05-20 20:28 davidm
-
- * Makefile, fips.c, fips.h, rndtest.c, rndtest.h:
-
- Get rid of the GPL version of the fips test and use a BSD licensed
- version so no one can get upset and cry derivative :-)
-
-2005-05-20 08:19 davidm
-
- * ixp4xx/ixp4xx.c:
-
- High throughput improvements. Can now handle multiple simultaneous
- requests.
-
-2005-05-20 00:55 davidm
-
- * ixp4xx/ixp4xx.c:
-
- works with openswan/OCF for ipsec receive.
-
- fixes ESP/AUTH processing (esp. HMAC)
-
- This driver needs a rework for kernel IPSEC as it's current packet
- at a time processing is not up to the task.
-
-2005-05-20 00:53 davidm
-
- * cryptosoft.c:
-
- working ESP/AUTH code now impleneted. Can do RX processing for
- openswan KLIPS.
-
- Fixes numerous problems in skb processing
-
- Fixes broken HMAC code and IV processing
-
-2005-05-14 01:44 davidm
-
- * cryptodev.c, ixp4xx/ixp4xx.c:
-
- Cleanup IXP key processing to guarantee only a single outstanding
- request rather than relying on the intel driver to get it right.
- Stops us losing requests.
-
- Tighten up the cryptodev response to "no answer" so that we don't
- take all the CPU. Only happens if there is a driver bug.
-
-2005-05-14 00:07 davidm
-
- * Config.in, Kconfig, Makefile, crypto.c, fips.c, fips.h, random.c,
- ixp4xx/ixp4xx.c, tools/bench-ocf:
-
- PKE and RNG support running on the ixp driver, added PKE bench
- marking to script. Still some multi-thread problems in the PKE
- code.
-
- Added FIP RNG checking option to config and code.
-
-2005-05-10 19:18 davidm
-
- * Makefile, ixp4xx/ixp4xx.c:
-
- Get the OCF stuff building for the 465 and CSR-2.0
-
-2005-04-27 19:18 davidm
-
- * cryptodev.h, random.c, hifn/hifn7751.c, safe/safe.c:
- cleanup the random number interface some more
-
-2005-04-27 00:57 davidm
-
- * cryptodev.h, cryptosoft.c, random.c, hifn/hifn7751.c,
- ixp4xx/ixp4xx.c, patches/linux-2.4.29-add_true_randomness.patch,
- patches/linux-2.6.11-add_true_randomness.patch, safe/safe.c,
- safe/safevar.h:
-
- Switch to a more "user" like random number handling. Drivers no
- longer poll for RNG data, we pull it as needed to fill
- /dev/random's entropy.
-
- Implement sk_buff handling within the OCF framework.
-
- fixup IV handling in cryptosoft.
-
-2005-04-27 00:41 davidm
-
- * crypto.c:
-
- Fix a race condition with the starting of kernel threads. The
- threads were running before the pid assignment in the parent.
-
-2005-03-24 23:57 davidm
-
- * Makefile:
- include crypto-tools.patch in the release file
-
-
-
-2005-03-24 20:14 davidm
-
- * safe/safe.c:
- Fixup compile time warnings due to some left over BSDisms
-
-
-2005-03-24 00:53 davidm
-
- * Makefile, README, README.sglinux, patches/linux-2.4.29-ocf.patch,
- patches/linux-2.6.11-ocf.patch, patches/ocf-linux-2.4.29.patch,
- patches/ocf-linux-2.6.11.patch:
- added cleaner patch names and a tarball target to aid releases
-
-
-2005-03-24 00:28 davidm
-
- * patches/crypto-tools.patch,
- patches/linux-2.4.29-add_true_randomness.patch,
- patches/linux-2.6.11-add_true_randomness.patch,
- patches/ocf-linux-2.4.29.patch, patches/ocf-linux-2.6.11.patch,
- patches/ssh.patch, patches/ssl.patch, tools/bench-ocf:
- move all the release file patches into CVS for simplicity
-
-
-2005-03-23 20:37 davidm
-
- * safe/safe.c:
- remove excessive debug from RNG routines so that you can turn on
- debug and live through it
-
-
-
-2005-03-23 02:23 davidm
-
- * safe/safe.c:
- fix memory corruption for mod_exp and the safenet, we were copying
- back more than the space available.
-
-
-
-2005-03-22 21:45 davidm
-
- * crypto.c, cryptodev.c, cryptodev.h, safe/safe.c:
- fixup a major sync issues with key processing (callback called
- before sleeping). Improve its performance while we are there with
- a CBIMM (callback immediate) option.
-
-
-
-2005-03-19 00:33 davidm
-
- * random.c:
- A new randomness function for both 2.4 and 2.6 that replaces out
- previous old solution for the hifn driver with more generic code
- that works on both kernels.
-
- add_true_randomness(u_int32_t *buf, int nwords);
-
-
-
-2005-03-18 21:01 davidm
-
- * Makefile, cryptodev.h, random.c, hifn/hifn7751.c, safe/safe.c:
- RNG support in both the safenet and the hifn plus the required
- kernel support.
-
- "hd /dev/random" runs much much faster now :-)
-
-
-
-2005-03-17 23:29 toby
-
- * cryptodev.c: Make sure the CIOCASYMFEAT ioctl on
- /dev/crypto copies out the capable features.
-
-2005-03-17 01:19 davidm
-
- * safe/: safe.c, safereg.h, safevar.h:
- hardware PK acceleration on the safenet (CRK_MOD_EXP only)
-
-
-2005-03-16 04:28 davidm
-
- * criov.c, crypto.c, cryptodev.c, safe/safe.c:
- fixup the FBSD id stuff to compile :-)
-
-2005-03-16 04:02 davidm
-
- * README, README.sglinux, TODO:
- Updated with versions, removed tabs, new kernel versions, web
- site etc
-
-2005-03-16 03:45 davidm
-
- * criov.c, crypto.c, cryptodev.c, cryptodev.h:
- more license formatting and version id's to help keep in touch with
- FreeBSD
-
-2005-03-16 03:16 davidm
-
- * safe/safe.c:
- up to date with FreeBSD versioning, no changes to merge
-
-2005-03-16 03:15 davidm
-
- * safe/safe.c:
- include FreeBSD version info so I can track changes better
-
-
-2005-03-16 03:11 davidm
-
- * hifn/: hifn7751.c, hifn7751reg.h, hifn7751var.h:
- incorporate latest updates from FreeBSD:
-
- | Update support for 795x parts: | o rework pll setup code to
- follow h/w specification | o add hint.hifn.X.pllconfig to specify
- reference clock setup | requirements; default is pci66 which
- means the clock is | derived from the PCI bus clock and the card
- resides in a | 66MHz slot | | Tested on 7955 and 7956 cards;
- support for 7954 cards not enabled | since we have no cards to test
- against.
-
-
-
-2005-03-16 02:50 davidm
-
- * Config.in, Kconfig, README, crypto.c, cryptodev.c, cryptodev.h,
- hifn/hifn7751.c, hifn/hifn7751var.h, safe/safe.c, safe/safevar.h:
- cleanups to build and run on 2.6.11 and 2.4.29 for a public release
-
- included configs locally to reduce patch to kernel and required
- user effort.
-
- pci_dma_sync_single fix from Michele Baldessari
- , with modifications by me to work on all
- kernels.
-
-
-
-2005-03-11 23:30 davidm
-
- * Makefile:
- fix up the compiling again, I had outstanding commits for this one
- :-)
-
-2005-03-11 21:56 danield
-
- * Makefile: Get ocf modules building again.
-
-2004-12-25 07:12 davidm
-
- * TODO:
- safenet is all good now AKAIK
-
-2004-12-25 07:02 davidm
-
- * Makefile, crypto.c, cryptodev.c, cryptosoft.c, uio.h:
- 2.6 port of the OCF framework, tested on Xscale and compiled for
- x86
-
-
-
-2004-12-10 02:41 davidm
-
- * hifn/hifn7751.c:
- Fix compilation as l_flags was not defined for LOCK in pci_remove
-
-
-2004-12-06 19:15 davidm
-
- * hifn/hifn7751.c, safe/safe.c:
- * Put locking into hifn_remove to ensure interrupts are not running
- while we remove the driver
-
- Use del_timer_sync (need to ensure timer is not running on
- another CPU
- * when we delete it).
-
- Improvements suggested by Evgeniy Polyakov <johnpol@2ka.mipt.ru>
-
-
-2004-12-02 09:16 davidm
-
- * README, README.sglinux:
- * Fix up all tabs to be spaces * explain how to update the ocf
- support in the patch to the current version.
-
-
-
-2004-12-02 09:11 davidm
-
- * README:
- * fix some spelling/grammar * add more info on the ssl.patch file
- and what it contains
-
-2004-12-02 09:08 davidm
-
- * README.sglinux:
- give some more instructions on the shar archive and extracting the
- release.
-
-2004-12-02 09:03 davidm
-
- * README.sglinux:
- how to include crypto-tools into 3.1.6
-
-
-
-2004-12-02 08:48 davidm
-
- * README.sglinux:
- updated for a new crypto patch for openssl-0.9.7e
-
-2004-12-02 08:04 davidm
-
- * README, README.sglinux:
- Clean up the README's to use the new SG Linux alpha and a specific
- 2.4.28 patch.
-
-
-
-2004-12-01 23:11 davidm
-
- * Makefile, criov.c, crypto.c, cryptodev.c, cryptosoft.c,
- hifn/Makefile, hifn/hifn7751.c, ixp4xx/Makefile, ixp4xx/ixp4xx.c,
- safe/Makefile, safe/safe.c:
- Re-worked the Makefiles so that including the code into a standard
- non-SG kernel is really easy.
-
- Fixed a non-initialised bug that was introduce into cryptosoft.c
- with the additional error checking.
-
-
-
-2004-12-01 01:54 davidm
-
- * TODO:
- updates based on things that have been fixed.
-
-2004-12-01 01:53 davidm
-
- * safe/: safe.c, safevar.h:
- Cleanup some old hacks based on the much cleaner port of the hifn
- driver.
-
-2004-12-01 01:53 davidm
-
- * cryptosoft.c:
- fix some crashes due to bad buffer sizes etc.
-
-2004-11-27 09:16 davidm
-
- * crypto.c, cryptodev.c, ixp4xx/ixp4xx.c:
- Fixed some nasty problems that were stopping reliable behaviour:
-
- 1) we were not initialising some of our lists/wait queues, which
- meant they appears to have things in them when in fact they did
- not. This actually didn't seems to cause any problems but is
- extremely bogus.
-
- 2) While a process was waiting for the crypto engine, if
- itreceived a signal we would lose sync with the engine and end
- up allowing out-of-band actions that were invalid (ie.,
- unregistering a context that was still active in a crypto
- operation).
-
- Of source the CryptACC should probably deal with this as well
- ;-)
-
-
-
-2004-11-26 01:33 davidm
-
- * TODO:
- We should also hook in the random number generators to linux
-
-
-2004-11-26 01:33 davidm
-
- * hifn/hifn7751.c:
- Changed all the accesses to DMS descriptors to not set the valid
- bit until after everything else was set. This got the driver
- running smoothly, along with a fixup to the pci_map_uio which
- wasn't settings lengths correctly.
-
-
-
-2004-11-25 21:15 davidm
-
- * ixp4xx/ixp4xx.c:
- document why using a new context for each packet is actually a
- better idea than allocating one (actually two) per session.
-
-
-
-2004-11-25 08:48 davidm
-
- * README, README.sglinux:
- updates from email with Intel to fix a few little things
-
-
-2004-11-25 00:02 davidm
-
- * README, README.sglinux, safe/safe.c:
- Some cleanups of doc and so on for Intel/General use
-
-2004-11-23 07:58 davidm
-
- * TODO:
- safenet is working on big endian machines now
-
-
-
-2004-11-23 07:56 davidm
-
- * ixp4xx/: Makefile, ixp4xx.c:
- Reference the Intel library, cleanup the IV sizes and turn on AES.
- Fix Makefile for new config options.
-
-
-
-2004-11-23 07:52 davidm
-
- * Makefile:
- Complete the changes of ixp to ixp4xx (IXP4xx) as appropriate
-
-
-2004-11-23 00:33 davidm
-
- * Makefile, README, ixp4xx/Makefile:
- Changes all references to ixp to be ixp4xx at Intels request
-
-
-2004-11-20 01:07 davidm
-
- * safe/: safe.c, safereg.h:
- fully working safenet on BE machines
-
-2004-11-19 01:03 davidm
-
- * Makefile, hifn/Makefile, hifn/hifn7751.c, hifn/hifn7751reg.h,
- hifn/hifn7751var.h:
- hifn driver code complete and compiling, needs a test now ;-)
-
-
-2004-11-18 21:45 davidm
-
- * hifn/: Makefile, hifn7751.c, hifn7751var.h:
- Makefile for building the hifn driver
-
-2004-11-18 21:44 davidm
-
- * hifn/: hifn7751.c, hifn7751reg.h, hifn7751var.h:
- Checkin the orginal freebsd source for the hifn driver as a
- reference in the future.
-
-
-
-2004-11-18 10:05 davidm
-
- * Makefile, README, TODO, criov.c, crypto.c, cryptodev.c,
- cryptodev.h, cryptosoft.c, uio.h, ixp4xx/Makefile, ixp4xx/ixp4xx.c,
- safe/Makefile, safe/safe.c, safe/safevar.h:
- Clean up license and copyright info to be more acceptable (and
- present) Clean up debug and trace Fixup memory freeing etc on
- safenet Fix compiler warnings (some were bugs)
-
-
-
-2004-11-17 02:23 davidm
-
- * safe/safe.c:
- working on Xscale (big endian) now but packet data is getting
- stuffed up due to endian problems (at least now we are talking to
- the chip correctly for BE). Good enough to test packet throughput,
- no good for testing scp.
-
-
-
-2004-11-17 02:21 davidm
-
- * criov.c:
- Make sure public symbols are exported by including the correct
- header files
-
-2004-11-17 02:15 davidm
-
- * crypto.c:
- even better cleanup of kernel threads on exit
-
-2004-11-17 02:15 davidm
-
- * cryptosoft.c:
- return some trace to debug so it doesn't appear
-
-2004-11-17 02:14 davidm
-
- * Makefile:
- Make sure all drivers get built, not just IXP
-
-2004-11-16 21:31 davidm
-
- * crypto.c:
- Fix problem with reboots and driver not unloading cleanly, we were
- not handling signals correctly in the kernel threads,
-
-2004-11-10 10:46 davidm
-
- * ixp4xx/ixp4xx.c:
- fix serious context leak, itturns out the context is still
- considered busy while it is calling the perform callback, so we
- cleanup on closing the session and on allocating the next context
- to work around this.
-
-
-
-2004-11-10 05:26 davidm
-
- * crypto.c, cryptodev.c, ixp4xx/ixp4xx.c, safe/safe.c:
- cleaned out some debug, found MAX tunnels bug, traced it various
- other cleanups.
-
-
-
-2004-11-10 04:02 davidm
-
- * cryptodev.c, cryptosoft.c, ixp4xx/ixp4xx.c, safe/Makefile,
- safe/safe.c:
- Fix up kmalloc usage to always zero resulting buffer everywhere
- (stops crashes in ixp)
-
- Add some function debug to ixp so you can see it working
-
- Fix safe driver to build and install in a real tree.
-
-
-
-2004-11-10 02:27 davidm
-
- * Makefile, criov.c, crypto.c, cryptosoft.c, ixp4xx/Makefile,
- ixp4xx/ixp4xx.c:
- Compiling OCF modules for the IXP crypto, needs testing now
-
-
-2004-11-09 19:16 davidm
-
- * criov.c, crypto.c, cryptodev.c, cryptodev.h, cryptosoft.c,
- cryptosoft.h, uio.h, safe/safe.c, safe/safevar.h:
- The linux port of OCF with working safenet and software modules.
- Still some bugs with mutiple crypto threads using the safenet
- driver.
-
-
-
-2004-11-09 18:49 davidm
-
- * Makefile, criov.c, crypto.c, cryptodev.c, cryptodev.h,
- cryptosoft.c, cryptosoft.h, uio.h, safe/Makefile, safe/safe.c,
- safe/safereg.h, safe/safevar.h:
- Check in the orginal free-bsd sources for the OCF support. This
- allows us to diff against it later to see if we botched anything
- major league.
-
-
-
CONFIG_OCF_PASEMI $CONFIG_OCF_OCF
dep_tristate ' ep80579 (HW crypto engine)' \
CONFIG_OCF_EP80579 $CONFIG_OCF_OCF
+dep_tristate ' Micronas c7108 (HW crypto engine)' \
+ CONFIG_OCF_C7108 $CONFIG_OCF_OCF
dep_tristate ' ocfnull (does no crypto)' \
CONFIG_OCF_OCFNULL $CONFIG_OCF_OCF
dep_tristate ' ocf-bench (HW crypto in-kernel benchmark)' \
help
OCF driver for the Intel EP80579 Integrated Processor Product Line.
+config OCF_CRYPTOCTEON
+ tristate "cryptocteon (HW crypto engine)"
+ depends on OCF_OCF
+ help
+ OCF driver for the Cavium OCTEON Processors.
+
+config OCF_KIRKWOOD
+ tristate "kirkwood (HW crypto engine)"
+ depends on OCF_OCF
+ help
+ OCF driver for the Marvell Kirkwood (88F6xxx) Processors.
+
+config OCF_C7108
+ tristate "Micronas 7108 (HW crypto engine)"
+ depends on OCF_OCF
+ help
+ OCF driver for the Microna 7108 Cipher processors.
+
config OCF_OCFNULL
tristate "ocfnull (fake crypto engine)"
depends on OCF_OCF
$(_obj)-$(CONFIG_OCF_TALITOS) += talitos$(_slash)
$(_obj)-$(CONFIG_OCF_PASEMI) += pasemi$(_slash)
$(_obj)-$(CONFIG_OCF_EP80579) += ep80579$(_slash)
+$(_obj)-$(CONFIG_OCF_CRYPTOCTEON) += cryptocteon$(_slash)
+$(_obj)-$(CONFIG_OCF_KIRKWOOD) += kirkwood$(_slash)
$(_obj)-$(CONFIG_OCF_OCFNULL) += ocfnull$(_slash)
+$(_obj)-$(CONFIG_OCF_C7108) += c7108$(_slash)
ocf-objs := $(OCF_OBJS)
diff -Nau /dev/null $$t | sed 's?^+++ \./?+++ linux/crypto/ocf/?'; \
done > $$patch; \
cat patches/linux-2.4.35-ocf.patch $$patch > $$patch24; \
- cat patches/linux-2.6.26-ocf.patch $$patch > $$patch26
+ cat patches/linux-2.6.33-ocf.patch $$patch > $$patch26
.PHONY: tarball
tarball:
--- /dev/null
+README - ocf-linux-20100325
+---------------------------
+
+This README provides instructions for getting ocf-linux compiled and
+operating in a generic linux environment. For other information you
+might like to visit the home page for this project:
+
+ http://ocf-linux.sourceforge.net/
+
+Adding OCF to linux
+-------------------
+
+ Not much in this file for now, just some notes. I usually build
+ the ocf support as modules but it can be built into the kernel as
+ well. To use it:
+
+ * mknod /dev/crypto c 10 70
+
+ * to add OCF to your kernel source, you have two options. Apply
+ the kernel specific patch:
+
+ cd linux-2.4*; gunzip < ocf-linux-24-XXXXXXXX.patch.gz | patch -p1
+ cd linux-2.6*; gunzip < ocf-linux-26-XXXXXXXX.patch.gz | patch -p1
+
+ if you do one of the above, then you can proceed to the next step,
+ or you can do the above process by hand with using the patches against
+ linux-2.4.35 and 2.6.33 to include the ocf code under crypto/ocf.
+ Here's how to add it:
+
+ for 2.4.35 (and later)
+
+ cd linux-2.4.35/crypto
+ tar xvzf ocf-linux.tar.gz
+ cd ..
+ patch -p1 < crypto/ocf/patches/linux-2.4.35-ocf.patch
+
+ for 2.6.23 (and later), find the kernel patch specific (or nearest)
+ to your kernel versions and then:
+
+ cd linux-2.6.NN/crypto
+ tar xvzf ocf-linux.tar.gz
+ cd ..
+ patch -p1 < crypto/ocf/patches/linux-2.6.NN-ocf.patch
+
+ It should be easy to take this patch and apply it to other more
+ recent versions of the kernels. The same patches should also work
+ relatively easily on kernels as old as 2.6.11 and 2.4.18.
+
+ * under 2.4 if you are on a non-x86 platform, you may need to:
+
+ cp linux-2.X.x/include/asm-i386/kmap_types.h linux-2.X.x/include/asm-YYY
+
+ so that you can build the kernel crypto support needed for the cryptosoft
+ driver.
+
+ * For simplicity you should enable all the crypto support in your kernel
+ except for the test driver. Likewise for the OCF options. Do not
+ enable OCF crypto drivers for HW that you do not have (for example
+ ixp4xx will not compile on non-Xscale systems).
+
+ * make sure that cryptodev.h (from ocf-linux.tar.gz) is installed as
+ crypto/cryptodev.h in an include directory that is used for building
+ applications for your platform. For example on a host system that
+ might be:
+
+ /usr/include/crypto/cryptodev.h
+
+ * patch your openssl-0.9.8n code with the openssl-0.9.8n.patch.
+ (NOTE: there is no longer a need to patch ssh). The patch is against:
+ openssl-0_9_8e
+
+ If you need a patch for an older version of openssl, you should look
+ to older OCF releases. This patch is unlikely to work on older
+ openssl versions.
+
+ openssl-0.9.8n.patch
+ - enables --with-cryptodev for non BSD systems
+ - adds -cpu option to openssl speed for calculating CPU load
+ under linux
+ - fixes null pointer in openssl speed multi thread output.
+ - fixes test keys to work with linux crypto's more stringent
+ key checking.
+ - adds MD5/SHA acceleration (Ronen Shitrit), only enabled
+ with the --with-cryptodev-digests option
+ - fixes bug in engine code caching.
+
+ * build crypto-tools-XXXXXXXX.tar.gz if you want to try some of the BSD
+ tools for testing OCF (ie., cryptotest).
+
+How to load the OCF drivers
+---------------------------
+
+ First insert the base modules:
+
+ insmod ocf
+ insmod cryptodev
+
+ You can then install the software OCF driver with:
+
+ insmod cryptosoft
+
+ and one or more of the OCF HW drivers with:
+
+ insmod safe
+ insmod hifn7751
+ insmod ixp4xx
+ ...
+
+ all the drivers take a debug option to enable verbose debug so that
+ you can see what is going on. For debug you load them as:
+
+ insmod ocf crypto_debug=1
+ insmod cryptodev cryptodev_debug=1
+ insmod cryptosoft swcr_debug=1
+
+ You may load more than one OCF crypto driver but then there is no guarantee
+ as to which will be used.
+
+ You can also enable debug at run time on 2.6 systems with the following:
+
+ echo 1 > /sys/module/ocf/parameters/crypto_debug
+ echo 1 > /sys/module/cryptodev/parameters/cryptodev_debug
+ echo 1 > /sys/module/cryptosoft/parameters/swcr_debug
+ echo 1 > /sys/module/hifn7751/parameters/hifn_debug
+ echo 1 > /sys/module/safe/parameters/safe_debug
+ echo 1 > /sys/module/ixp4xx/parameters/ixp_debug
+ ...
+
+Testing the OCF support
+-----------------------
+
+ run "cryptotest", it should do a short test for a couple of
+ des packets. If it does everything is working.
+
+ If this works, then ssh will use the driver when invoked as:
+
+ ssh -c 3des username@host
+
+ to see for sure that it is operating, enable debug as defined above.
+
+ To get a better idea of performance run:
+
+ cryptotest 100 4096
+
+ There are more options to cryptotest, see the help.
+
+ It is also possible to use openssl to test the speed of the crypto
+ drivers.
+
+ openssl speed -evp des -engine cryptodev -elapsed
+ openssl speed -evp des3 -engine cryptodev -elapsed
+ openssl speed -evp aes128 -engine cryptodev -elapsed
+
+ and multiple threads (10) with:
+
+ openssl speed -evp des -engine cryptodev -elapsed -multi 10
+ openssl speed -evp des3 -engine cryptodev -elapsed -multi 10
+ openssl speed -evp aes128 -engine cryptodev -elapsed -multi 10
+
+ for public key testing you can try:
+
+ cryptokeytest
+ openssl speed -engine cryptodev rsa -elapsed
+ openssl speed -engine cryptodev dsa -elapsed
+
+David McCullough
+david_mccullough@mcafee.com
--- /dev/null
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_C7108) += aes-7108.o
+
+obj ?= .
+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
--- /dev/null
+/*
+ * Copyright (C) 2006 Micronas USA
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored in part by the Defense Advanced Research Projects
+ * Agency (DARPA) and Air Force Research Laboratory, Air Force
+ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
+ *
+ */
+
+//#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/crypto.h>
+#include <linux/mm.h>
+#include <linux/skbuff.h>
+#include <linux/random.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+//#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <cryptodev.h>
+#include <uio.h>
+#include <aes-7108.h>
+
+/* Runtime mode */
+static int c7108_crypto_mode = C7108_AES_CTRL_MODE_CTR;
+//static int c7108_crypto_mode = C7108_AES_CTRL_MODE_CBC;
+
+static int32_t c7108_id = -1;
+static struct cipher_7108 **c7108_sessions = NULL;
+static u_int32_t c7108_sesnum = 0;
+static unsigned long iobar;
+
+/* Crypto entry points */
+static int c7108_process(void *, struct cryptop *, int);
+static int c7108_newsession(void *, u_int32_t *, struct cryptoini *);
+static int c7108_freesession(void *, u_int64_t);
+
+/* Globals */
+static int debug = 0;
+static spinlock_t csr_mutex;
+
+/* Generic controller-based lock */
+#define AES_LOCK()\
+ spin_lock(&csr_mutex)
+#define AES_UNLOCK()\
+ spin_unlock(&csr_mutex)
+
+/* 7108 AES register access */
+#define c7108_reg_wr8(a,d) iowrite8(d, (void*)(iobar+(a)))
+#define c7108_reg_wr16(a,d) iowrite16(d, (void*)(iobar+(a)))
+#define c7108_reg_wr32(a,d) iowrite32(d, (void*)(iobar+(a)))
+#define c7108_reg_rd8(a) ioread8((void*)(iobar+(a)))
+#define c7108_reg_rd16(a) ioread16((void*)(iobar+(a)))
+#define c7108_reg_rd32(a) ioread32((void*)(iobar+(a)))
+
+static int
+c7108_xlate_key(int klen, u8* k8ptr, u32* k32ptr)
+{
+ int i, nw=0;
+ nw = ((klen >= 256) ? 8 : (klen >= 192) ? 6 : 4);
+ for ( i = 0; i < nw; i++) {
+ k32ptr[i] = (k8ptr[i+3] << 24) | (k8ptr[i+2] << 16) |
+ (k8ptr[i+1] << 8) | k8ptr[i];
+
+ }
+ return 0;
+}
+
+static int
+c7108_cache_key(int klen, u32* k32ptr, u8* k8ptr)
+{
+ int i, nb=0;
+ u8* ptr = (u8*)k32ptr;
+ nb = ((klen >= 256) ? 32 : (klen >= 192) ? 24 : 16);
+ for ( i = 0; i < nb; i++)
+ k8ptr[i] = ptr[i];
+ return 0;
+}
+
+static int
+c7108_aes_setup_dma(u32 src, u32 dst, u32 len)
+{
+ if (len < 16) {
+ printk("len < 16\n");
+ return -10;
+ }
+ if (len % 16) {
+ printk("len not multiple of 16\n");
+ return -11;
+ }
+ c7108_reg_wr16(C7108_AES_DMA_SRC0_LO, (u16) src);
+ c7108_reg_wr16(C7108_AES_DMA_SRC0_HI, (u16)((src & 0xffff0000) >> 16));
+ c7108_reg_wr16(C7108_AES_DMA_DST0_LO, (u16) dst);
+ c7108_reg_wr16(C7108_AES_DMA_DST0_HI, (u16)((dst & 0xffff0000) >> 16));
+ c7108_reg_wr16(C7108_AES_DMA_LEN, (u16) ((len / 16) - 1));
+
+ return 0;
+}
+
+static int
+c7108_aes_set_hw_iv(u8 iv[16])
+{
+ c7108_reg_wr16(C7108_AES_IV0_LO, (u16) ((iv[1] << 8) | iv[0]));
+ c7108_reg_wr16(C7108_AES_IV0_HI, (u16) ((iv[3] << 8) | iv[2]));
+ c7108_reg_wr16(C7108_AES_IV1_LO, (u16) ((iv[5] << 8) | iv[4]));
+ c7108_reg_wr16(C7108_AES_IV1_HI, (u16) ((iv[7] << 8) | iv[6]));
+ c7108_reg_wr16(C7108_AES_IV2_LO, (u16) ((iv[9] << 8) | iv[8]));
+ c7108_reg_wr16(C7108_AES_IV2_HI, (u16) ((iv[11] << 8) | iv[10]));
+ c7108_reg_wr16(C7108_AES_IV3_LO, (u16) ((iv[13] << 8) | iv[12]));
+ c7108_reg_wr16(C7108_AES_IV3_HI, (u16) ((iv[15] << 8) | iv[14]));
+
+ return 0;
+}
+
+static void
+c7108_aes_read_dkey(u32 * dkey)
+{
+ dkey[0] = (c7108_reg_rd16(C7108_AES_EKEY0_HI) << 16) |
+ c7108_reg_rd16(C7108_AES_EKEY0_LO);
+ dkey[1] = (c7108_reg_rd16(C7108_AES_EKEY1_HI) << 16) |
+ c7108_reg_rd16(C7108_AES_EKEY1_LO);
+ dkey[2] = (c7108_reg_rd16(C7108_AES_EKEY2_HI) << 16) |
+ c7108_reg_rd16(C7108_AES_EKEY2_LO);
+ dkey[3] = (c7108_reg_rd16(C7108_AES_EKEY3_HI) << 16) |
+ c7108_reg_rd16(C7108_AES_EKEY3_LO);
+ dkey[4] = (c7108_reg_rd16(C7108_AES_EKEY4_HI) << 16) |
+ c7108_reg_rd16(C7108_AES_EKEY4_LO);
+ dkey[5] = (c7108_reg_rd16(C7108_AES_EKEY5_HI) << 16) |
+ c7108_reg_rd16(C7108_AES_EKEY5_LO);
+ dkey[6] = (c7108_reg_rd16(C7108_AES_EKEY6_HI) << 16) |
+ c7108_reg_rd16(C7108_AES_EKEY6_LO);
+ dkey[7] = (c7108_reg_rd16(C7108_AES_EKEY7_HI) << 16) |
+ c7108_reg_rd16(C7108_AES_EKEY7_LO);
+}
+
+static int
+c7108_aes_cipher(int op,
+ u32 dst,
+ u32 src,
+ u32 len,
+ int klen,
+ u16 mode,
+ u32 key[8],
+ u8 iv[16])
+{
+ int rv = 0, cnt=0;
+ u16 ctrl = 0, stat = 0;
+
+ AES_LOCK();
+
+ /* Setup key length */
+ if (klen == 128) {
+ ctrl |= C7108_AES_KEY_LEN_128;
+ } else if (klen == 192) {
+ ctrl |= C7108_AES_KEY_LEN_192;
+ } else if (klen == 256) {
+ ctrl |= C7108_AES_KEY_LEN_256;
+ } else {
+ AES_UNLOCK();
+ return -3;
+ }
+
+ /* Check opcode */
+ if (C7108_AES_ENCRYPT == op) {
+ ctrl |= C7108_AES_ENCRYPT;
+ } else if (C7108_AES_DECRYPT == op) {
+ ctrl |= C7108_AES_DECRYPT;
+ } else {
+ AES_UNLOCK();
+ return -4;
+ }
+
+ /* check mode */
+ if ( (mode != C7108_AES_CTRL_MODE_CBC) &&
+ (mode != C7108_AES_CTRL_MODE_CFB) &&
+ (mode != C7108_AES_CTRL_MODE_OFB) &&
+ (mode != C7108_AES_CTRL_MODE_CTR) &&
+ (mode != C7108_AES_CTRL_MODE_ECB) ) {
+ AES_UNLOCK();
+ return -5;
+ }
+
+ /* Now set mode */
+ ctrl |= mode;
+
+ /* For CFB, OFB, and CTR, neither backward key
+ * expansion nor key inversion is required.
+ */
+ if ( (C7108_AES_DECRYPT == op) &&
+ (C7108_AES_CTRL_MODE_CBC == mode ||
+ C7108_AES_CTRL_MODE_ECB == mode ) ){
+
+ /* Program Key */
+ c7108_reg_wr16(C7108_AES_KEY0_LO, (u16) key[4]);
+ c7108_reg_wr16(C7108_AES_KEY0_HI, (u16) (key[4] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY1_LO, (u16) key[5]);
+ c7108_reg_wr16(C7108_AES_KEY1_HI, (u16) (key[5] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY2_LO, (u16) key[6]);
+ c7108_reg_wr16(C7108_AES_KEY2_HI, (u16) (key[6] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY3_LO, (u16) key[7]);
+ c7108_reg_wr16(C7108_AES_KEY3_HI, (u16) (key[7] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY6_LO, (u16) key[2]);
+ c7108_reg_wr16(C7108_AES_KEY6_HI, (u16) (key[2] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY7_LO, (u16) key[3]);
+ c7108_reg_wr16(C7108_AES_KEY7_HI, (u16) (key[3] >> 16));
+
+
+ if (192 == klen) {
+ c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[7]);
+ c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[7] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[7]);
+ c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[7] >> 16));
+
+ } else if (256 == klen) {
+ /* 256 */
+ c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[0]);
+ c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[0] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[1]);
+ c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[1] >> 16));
+
+ }
+
+ } else {
+ /* Program Key */
+ c7108_reg_wr16(C7108_AES_KEY0_LO, (u16) key[0]);
+ c7108_reg_wr16(C7108_AES_KEY0_HI, (u16) (key[0] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY1_LO, (u16) key[1]);
+ c7108_reg_wr16(C7108_AES_KEY1_HI, (u16) (key[1] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY2_LO, (u16) key[2]);
+ c7108_reg_wr16(C7108_AES_KEY2_HI, (u16) (key[2] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY3_LO, (u16) key[3]);
+ c7108_reg_wr16(C7108_AES_KEY3_HI, (u16) (key[3] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[4]);
+ c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[4] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[5]);
+ c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[5] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY6_LO, (u16) key[6]);
+ c7108_reg_wr16(C7108_AES_KEY6_HI, (u16) (key[6] >> 16));
+ c7108_reg_wr16(C7108_AES_KEY7_LO, (u16) key[7]);
+ c7108_reg_wr16(C7108_AES_KEY7_HI, (u16) (key[7] >> 16));
+
+ }
+
+ /* Set IV always */
+ c7108_aes_set_hw_iv(iv);
+
+ /* Program DMA addresses */
+ if ((rv = c7108_aes_setup_dma(src, dst, len)) < 0) {
+ AES_UNLOCK();
+ return rv;
+ }
+
+
+ /* Start AES cipher */
+ c7108_reg_wr16(C7108_AES_CTRL, ctrl | C7108_AES_GO);
+
+ //printk("Ctrl: 0x%x\n", ctrl | C7108_AES_GO);
+ do {
+ /* TODO: interrupt mode */
+ // printk("aes_stat=0x%x\n", stat);
+ //udelay(100);
+ } while ((cnt++ < 1000000) &&
+ !((stat=c7108_reg_rd16(C7108_AES_CTRL))&C7108_AES_OP_DONE));
+
+
+ if ((mode == C7108_AES_CTRL_MODE_ECB)||
+ (mode == C7108_AES_CTRL_MODE_CBC)) {
+ /* Save out key when the lock is held ... */
+ c7108_aes_read_dkey(key);
+ }
+
+ AES_UNLOCK();
+ return 0;
+
+}
+
+/*
+ * Generate a new crypto device session.
+ */
+static int
+c7108_newsession(void *arg, u_int32_t *sid, struct cryptoini *cri)
+{
+ struct cipher_7108 **swd;
+ u_int32_t i;
+ char *algo;
+ int mode, xfm_type;
+
+ dprintk("%s()\n", __FUNCTION__);
+ if (sid == NULL || cri == NULL) {
+ dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ if (c7108_sessions) {
+ for (i = 1; i < c7108_sesnum; i++)
+ if (c7108_sessions[i] == NULL)
+ break;
+ } else
+ i = 1; /* NB: to silence compiler warning */
+
+ if (c7108_sessions == NULL || i == c7108_sesnum) {
+ if (c7108_sessions == NULL) {
+ i = 1; /* We leave c7108_sessions[0] empty */
+ c7108_sesnum = CRYPTO_SW_SESSIONS;
+ } else
+ c7108_sesnum *= 2;
+
+ swd = kmalloc(c7108_sesnum * sizeof(struct cipher_7108 *),
+ GFP_ATOMIC);
+ if (swd == NULL) {
+ /* Reset session number */
+ if (c7108_sesnum == CRYPTO_SW_SESSIONS)
+ c7108_sesnum = 0;
+ else
+ c7108_sesnum /= 2;
+ dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+ return ENOBUFS;
+ }
+ memset(swd, 0, c7108_sesnum * sizeof(struct cipher_7108 *));
+
+ /* Copy existing sessions */
+ if (c7108_sessions) {
+ memcpy(swd, c7108_sessions,
+ (c7108_sesnum / 2) * sizeof(struct cipher_7108 *));
+ kfree(c7108_sessions);
+ }
+
+ c7108_sessions = swd;
+
+ }
+
+ swd = &c7108_sessions[i];
+ *sid = i;
+
+ while (cri) {
+ *swd = (struct cipher_7108 *)
+ kmalloc(sizeof(struct cipher_7108), GFP_ATOMIC);
+ if (*swd == NULL) {
+ c7108_freesession(NULL, i);
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ return ENOBUFS;
+ }
+ memset(*swd, 0, sizeof(struct cipher_7108));
+
+ algo = NULL;
+ mode = 0;
+ xfm_type = HW_TYPE_CIPHER;
+
+ switch (cri->cri_alg) {
+
+ case CRYPTO_AES_CBC:
+ algo = "aes";
+ mode = CRYPTO_TFM_MODE_CBC;
+ c7108_crypto_mode = C7108_AES_CTRL_MODE_CBC;
+ break;
+#if 0
+ case CRYPTO_AES_CTR:
+ algo = "aes_ctr";
+ mode = CRYPTO_TFM_MODE_CBC;
+ c7108_crypto_mode = C7108_AES_CTRL_MODE_CTR;
+ break;
+ case CRYPTO_AES_ECB:
+ algo = "aes_ecb";
+ mode = CRYPTO_TFM_MODE_CBC;
+ c7108_crypto_mode = C7108_AES_CTRL_MODE_ECB;
+ break;
+ case CRYPTO_AES_OFB:
+ algo = "aes_ofb";
+ mode = CRYPTO_TFM_MODE_CBC;
+ c7108_crypto_mode = C7108_AES_CTRL_MODE_OFB;
+ break;
+ case CRYPTO_AES_CFB:
+ algo = "aes_cfb";
+ mode = CRYPTO_TFM_MODE_CBC;
+ c7108_crypto_mode = C7108_AES_CTRL_MODE_CFB;
+ break;
+#endif
+ default:
+ printk("unsupported crypto algorithm: %d\n",
+ cri->cri_alg);
+ return -EINVAL;
+ break;
+ }
+
+
+ if (!algo || !*algo) {
+ printk("cypher_7108_crypto: Unknown algo 0x%x\n",
+ cri->cri_alg);
+ c7108_freesession(NULL, i);
+ return EINVAL;
+ }
+
+ if (xfm_type == HW_TYPE_CIPHER) {
+ if (debug) {
+ dprintk("%s key:", __FUNCTION__);
+ for (i = 0; i < (cri->cri_klen + 7) / 8; i++)
+ dprintk("%s0x%02x", (i % 8) ? " " : "\n ",
+ cri->cri_key[i]);
+ dprintk("\n");
+ }
+
+ } else if (xfm_type == SW_TYPE_HMAC ||
+ xfm_type == SW_TYPE_HASH) {
+ printk("cypher_7108_crypto: HMAC unsupported!\n");
+ return -EINVAL;
+ c7108_freesession(NULL, i);
+ } else {
+ printk("cypher_7108_crypto: "
+ "Unhandled xfm_type %d\n", xfm_type);
+ c7108_freesession(NULL, i);
+ return EINVAL;
+ }
+
+ (*swd)->cri_alg = cri->cri_alg;
+ (*swd)->xfm_type = xfm_type;
+
+ cri = cri->cri_next;
+ swd = &((*swd)->next);
+ }
+ return 0;
+}
+
+/*
+ * Free a session.
+ */
+static int
+c7108_freesession(void *arg, u_int64_t tid)
+{
+ struct cipher_7108 *swd;
+ u_int32_t sid = CRYPTO_SESID2LID(tid);
+
+ dprintk("%s()\n", __FUNCTION__);
+ if (sid > c7108_sesnum || c7108_sessions == NULL ||
+ c7108_sessions[sid] == NULL) {
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ return(EINVAL);
+ }
+
+ /* Silently accept and return */
+ if (sid == 0)
+ return(0);
+
+ while ((swd = c7108_sessions[sid]) != NULL) {
+ c7108_sessions[sid] = swd->next;
+ kfree(swd);
+ }
+ return 0;
+}
+
+/*
+ * Process a hardware request.
+ */
+static int
+c7108_process(void *arg, struct cryptop *crp, int hint)
+{
+ struct cryptodesc *crd;
+ struct cipher_7108 *sw;
+ u_int32_t lid;
+ int type;
+ u32 hwkey[8];
+
+#define SCATTERLIST_MAX 16
+ struct scatterlist sg[SCATTERLIST_MAX];
+ int sg_num, sg_len, skip;
+ struct sk_buff *skb = NULL;
+ struct uio *uiop = NULL;
+
+ dprintk("%s()\n", __FUNCTION__);
+ /* Sanity check */
+ if (crp == NULL) {
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ crp->crp_etype = 0;
+
+ if (crp->crp_desc == NULL || crp->crp_buf == NULL) {
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ crp->crp_etype = EINVAL;
+ goto done;
+ }
+
+ lid = crp->crp_sid & 0xffffffff;
+ if (lid >= c7108_sesnum || lid == 0 || c7108_sessions == NULL ||
+ c7108_sessions[lid] == NULL) {
+ crp->crp_etype = ENOENT;
+ dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__);
+ goto done;
+ }
+
+ /*
+ * do some error checking outside of the loop for SKB and IOV
+ * processing this leaves us with valid skb or uiop pointers
+ * for later
+ */
+ if (crp->crp_flags & CRYPTO_F_SKBUF) {
+ skb = (struct sk_buff *) crp->crp_buf;
+ if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) {
+ printk("%s,%d: %d nr_frags > SCATTERLIST_MAX",
+ __FILE__, __LINE__,
+ skb_shinfo(skb)->nr_frags);
+ goto done;
+ }
+ } else if (crp->crp_flags & CRYPTO_F_IOV) {
+ uiop = (struct uio *) crp->crp_buf;
+ if (uiop->uio_iovcnt > SCATTERLIST_MAX) {
+ printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX",
+ __FILE__, __LINE__,
+ uiop->uio_iovcnt);
+ goto done;
+ }
+ }
+
+ /* Go through crypto descriptors, processing as we go */
+ for (crd = crp->crp_desc; crd; crd = crd->crd_next) {
+ /*
+ * Find the crypto context.
+ *
+ * XXX Note that the logic here prevents us from having
+ * XXX the same algorithm multiple times in a session
+ * XXX (or rather, we can but it won't give us the right
+ * XXX results). To do that, we'd need some way of differentiating
+ * XXX between the various instances of an algorithm (so we can
+ * XXX locate the correct crypto context).
+ */
+ for (sw = c7108_sessions[lid];
+ sw && sw->cri_alg != crd->crd_alg;
+ sw = sw->next)
+ ;
+
+ /* No such context ? */
+ if (sw == NULL) {
+ crp->crp_etype = EINVAL;
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ goto done;
+ }
+
+ skip = crd->crd_skip;
+
+ /*
+ * setup the SG list skip from the start of the buffer
+ */
+ memset(sg, 0, sizeof(sg));
+ if (crp->crp_flags & CRYPTO_F_SKBUF) {
+ int i, len;
+ type = CRYPTO_BUF_SKBUF;
+
+ sg_num = 0;
+ sg_len = 0;
+
+ if (skip < skb_headlen(skb)) {
+ //sg[sg_num].page = virt_to_page(skb->data + skip);
+ //sg[sg_num].offset = offset_in_page(skb->data + skip);
+ len = skb_headlen(skb) - skip;
+ if (len + sg_len > crd->crd_len)
+ len = crd->crd_len - sg_len;
+ //sg[sg_num].length = len;
+ sg_set_page(&sg[sg_num], virt_to_page(skb->data + skip), len, offset_in_page(skb->data + skip));
+ sg_len += sg[sg_num].length;
+ sg_num++;
+ skip = 0;
+ } else
+ skip -= skb_headlen(skb);
+
+ for (i = 0; sg_len < crd->crd_len &&
+ i < skb_shinfo(skb)->nr_frags &&
+ sg_num < SCATTERLIST_MAX; i++) {
+ if (skip < skb_shinfo(skb)->frags[i].size) {
+ //sg[sg_num].page = skb_shinfo(skb)->frags[i].page;
+ //sg[sg_num].offset = skb_shinfo(skb)->frags[i].page_offset + skip;
+ len = skb_shinfo(skb)->frags[i].size - skip;
+ if (len + sg_len > crd->crd_len)
+ len = crd->crd_len - sg_len;
+ //sg[sg_num].length = len;
+ sg_set_page(&sg[sg_num], skb_shinfo(skb)->frags[i].page, len, skb_shinfo(skb)->frags[i].page_offset + skip);
+ sg_len += sg[sg_num].length;
+ sg_num++;
+ skip = 0;
+ } else
+ skip -= skb_shinfo(skb)->frags[i].size;
+ }
+ } else if (crp->crp_flags & CRYPTO_F_IOV) {
+ int len;
+ type = CRYPTO_BUF_IOV;
+ sg_len = 0;
+ for (sg_num = 0; sg_len < crd->crd_len &&
+ sg_num < uiop->uio_iovcnt &&
+ sg_num < SCATTERLIST_MAX; sg_num++) {
+ if (skip < uiop->uio_iov[sg_num].iov_len) {
+ //sg[sg_num].page = virt_to_page(uiop->uio_iov[sg_num].iov_base+skip);
+ //sg[sg_num].offset = offset_in_page(uiop->uio_iov[sg_num].iov_base+skip);
+ len = uiop->uio_iov[sg_num].iov_len - skip;
+ if (len + sg_len > crd->crd_len)
+ len = crd->crd_len - sg_len;
+ //sg[sg_num].length = len;
+ sg_set_page(&sg[sg_num], virt_to_page(uiop->uio_iov[sg_num].iov_base+skip), len, offset_in_page(uiop->uio_iov[sg_num].iov_base+skip));
+ sg_len += sg[sg_num].length;
+ skip = 0;
+ } else
+ skip -= uiop->uio_iov[sg_num].iov_len;
+ }
+ } else {
+ type = CRYPTO_BUF_CONTIG;
+ //sg[0].page = virt_to_page(crp->crp_buf + skip);
+ //sg[0].offset = offset_in_page(crp->crp_buf + skip);
+ sg_len = (crp->crp_ilen - skip);
+ if (sg_len > crd->crd_len)
+ sg_len = crd->crd_len;
+ //sg[0].length = sg_len;
+ sg_set_page(&sg[0], virt_to_page(crp->crp_buf + skip), sg_len, offset_in_page(crp->crp_buf + skip));
+ sg_num = 1;
+ }
+
+
+ switch (sw->xfm_type) {
+
+ case HW_TYPE_CIPHER: {
+
+ unsigned char iv[64];
+ unsigned char *ivp = iv;
+ int i;
+ int ivsize = 16; /* fixed for AES */
+ int blocksize = 16; /* fixed for AES */
+
+ if (sg_len < blocksize) {
+ crp->crp_etype = EINVAL;
+ dprintk("%s,%d: EINVAL len %d < %d\n",
+ __FILE__, __LINE__,
+ sg_len,
+ blocksize);
+ goto done;
+ }
+
+ if (ivsize > sizeof(iv)) {
+ crp->crp_etype = EINVAL;
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ goto done;
+ }
+
+ if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
+
+ if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
+ ivp = crd->crd_iv;
+ } else {
+ get_random_bytes(ivp, ivsize);
+ }
+ /*
+ * do we have to copy the IV back to the buffer ?
+ */
+ if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+ crypto_copyback(crp->crp_buf,
+ crd->crd_inject,
+ ivsize,
+ (caddr_t)ivp);
+ }
+
+ c7108_xlate_key(crd->crd_klen,
+ (u8*)crd->crd_key, (u32*)hwkey);
+
+ /* Encrypt SG list */
+ for (i = 0; i < sg_num; i++) {
+ sg[i].dma_address =
+ dma_map_single(NULL,
+ kmap(sg_page(&sg[i])) + sg[i].offset, sg_len, DMA_BIDIRECTIONAL);
+#if 0
+ printk("sg[%d]:0x%08x, off 0x%08x "
+ "kmap 0x%08x phys 0x%08x\n",
+ i, sg[i].page, sg[i].offset,
+ kmap(sg[i].page) + sg[i].offset,
+ sg[i].dma_address);
+#endif
+ c7108_aes_cipher(C7108_AES_ENCRYPT,
+ sg[i].dma_address,
+ sg[i].dma_address,
+ sg_len,
+ crd->crd_klen,
+ c7108_crypto_mode,
+ hwkey,
+ ivp);
+
+ if ((c7108_crypto_mode == C7108_AES_CTRL_MODE_CBC)||
+ (c7108_crypto_mode == C7108_AES_CTRL_MODE_ECB)) {
+ /* Read back expanded key and cache it in key
+ * context.
+ * NOTE: for ECB/CBC modes only (not CTR, CFB, OFB)
+ * where you set the key once.
+ */
+ c7108_cache_key(crd->crd_klen,
+ (u32*)hwkey, (u8*)crd->crd_key);
+#if 0
+ printk("%s expanded key:", __FUNCTION__);
+ for (i = 0; i < (crd->crd_klen + 7) / 8; i++)
+ printk("%s0x%02x", (i % 8) ? " " : "\n ",
+ crd->crd_key[i]);
+ printk("\n");
+#endif
+ }
+ }
+ }
+ else { /*decrypt */
+
+ if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
+ ivp = crd->crd_iv;
+ } else {
+ crypto_copydata(crp->crp_buf, crd->crd_inject,
+ ivsize, (caddr_t)ivp);
+ }
+
+ c7108_xlate_key(crd->crd_klen,
+ (u8*)crd->crd_key, (u32*)hwkey);
+
+ /* Decrypt SG list */
+ for (i = 0; i < sg_num; i++) {
+ sg[i].dma_address =
+ dma_map_single(NULL,
+ kmap(sg_page(&sg[i])) + sg[i].offset,
+ sg_len, DMA_BIDIRECTIONAL);
+
+#if 0
+ printk("sg[%d]:0x%08x, off 0x%08x "
+ "kmap 0x%08x phys 0x%08x\n",
+ i, sg[i].page, sg[i].offset,
+ kmap(sg[i].page) + sg[i].offset,
+ sg[i].dma_address);
+#endif
+ c7108_aes_cipher(C7108_AES_DECRYPT,
+ sg[i].dma_address,
+ sg[i].dma_address,
+ sg_len,
+ crd->crd_klen,
+ c7108_crypto_mode,
+ hwkey,
+ ivp);
+ }
+ }
+ } break;
+ case SW_TYPE_HMAC:
+ case SW_TYPE_HASH:
+ crp->crp_etype = EINVAL;
+ goto done;
+ break;
+
+ case SW_TYPE_COMP:
+ crp->crp_etype = EINVAL;
+ goto done;
+ break;
+
+ default:
+ /* Unknown/unsupported algorithm */
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ crp->crp_etype = EINVAL;
+ goto done;
+ }
+ }
+
+done:
+ crypto_done(crp);
+ return 0;
+}
+
+static struct {
+ softc_device_decl sc_dev;
+} a7108dev;
+
+static device_method_t a7108_methods = {
+/* crypto device methods */
+ DEVMETHOD(cryptodev_newsession, c7108_newsession),
+ DEVMETHOD(cryptodev_freesession, c7108_freesession),
+ DEVMETHOD(cryptodev_process, c7108_process),
+ DEVMETHOD(cryptodev_kprocess, NULL)
+};
+
+static int
+cypher_7108_crypto_init(void)
+{
+ dprintk("%s(%p)\n", __FUNCTION__, cypher_7108_crypto_init);
+
+ iobar = (unsigned long)ioremap(CCU_AES_REG_BASE, 0x4000);
+ printk("7108: AES @ 0x%08x (0x%08x phys) %s mode\n",
+ iobar, CCU_AES_REG_BASE,
+ c7108_crypto_mode & C7108_AES_CTRL_MODE_CBC ? "CBC" :
+ c7108_crypto_mode & C7108_AES_CTRL_MODE_ECB ? "ECB" :
+ c7108_crypto_mode & C7108_AES_CTRL_MODE_CTR ? "CTR" :
+ c7108_crypto_mode & C7108_AES_CTRL_MODE_CFB ? "CFB" :
+ c7108_crypto_mode & C7108_AES_CTRL_MODE_OFB ? "OFB" : "???");
+ csr_mutex = SPIN_LOCK_UNLOCKED;
+
+ memset(&a7108dev, 0, sizeof(a7108dev));
+ softc_device_init(&a7108dev, "aes7108", 0, a7108_methods);
+
+ c7108_id = crypto_get_driverid(softc_get_device(&a7108dev), CRYPTOCAP_F_HARDWARE);
+ if (c7108_id < 0)
+ panic("7108: crypto device cannot initialize!");
+
+// crypto_register(c7108_id, CRYPTO_AES_CBC, 0, 0, c7108_newsession, c7108_freesession, c7108_process, NULL);
+ crypto_register(c7108_id, CRYPTO_AES_CBC, 0, 0);
+
+ return(0);
+}
+
+static void
+cypher_7108_crypto_exit(void)
+{
+ dprintk("%s()\n", __FUNCTION__);
+ crypto_unregister_all(c7108_id);
+ c7108_id = -1;
+}
+
+module_init(cypher_7108_crypto_init);
+module_exit(cypher_7108_crypto_exit);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("Cypher 7108 Crypto (OCF module for kernel crypto)");
--- /dev/null
+/*
+ * Copyright (C) 2006 Micronas USA
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored in part by the Defense Advanced Research Projects
+ * Agency (DARPA) and Air Force Research Laboratory, Air Force
+ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
+ *
+ */
+
+#ifndef __AES_7108_H__
+#define __AES_7108_H__
+
+/* Cypher 7108 AES Controller Hardware */
+#define CCU_REG_BASE 0x1b500000
+#define CCU_AES_REG_BASE (CCU_REG_BASE + 0x100)
+#define C7108_AES_KEY0_LO (0x0000)
+#define C7108_AES_KEY0_HI (0x0004)
+#define C7108_AES_KEY1_LO (0x0008)
+#define C7108_AES_KEY1_HI (0x000c)
+#define C7108_AES_KEY2_LO (0x0010)
+#define C7108_AES_KEY2_HI (0x0014)
+#define C7108_AES_KEY3_LO (0x0018)
+#define C7108_AES_KEY3_HI (0x001c)
+#define C7108_AES_KEY4_LO (0x0020)
+#define C7108_AES_KEY4_HI (0x0024)
+#define C7108_AES_KEY5_LO (0x0028)
+#define C7108_AES_KEY5_HI (0x002c)
+#define C7108_AES_KEY6_LO (0x0030)
+#define C7108_AES_KEY6_HI (0x0034)
+#define C7108_AES_KEY7_LO (0x0038)
+#define C7108_AES_KEY7_HI (0x003c)
+#define C7108_AES_IV0_LO (0x0040)
+#define C7108_AES_IV0_HI (0x0044)
+#define C7108_AES_IV1_LO (0x0048)
+#define C7108_AES_IV1_HI (0x004c)
+#define C7108_AES_IV2_LO (0x0050)
+#define C7108_AES_IV2_HI (0x0054)
+#define C7108_AES_IV3_LO (0x0058)
+#define C7108_AES_IV3_HI (0x005c)
+
+#define C7108_AES_DMA_SRC0_LO (0x0068) /* Bits 0:15 */
+#define C7108_AES_DMA_SRC0_HI (0x006c) /* Bits 27:16 */
+#define C7108_AES_DMA_DST0_LO (0x0070) /* Bits 0:15 */
+#define C7108_AES_DMA_DST0_HI (0x0074) /* Bits 27:16 */
+#define C7108_AES_DMA_LEN (0x0078) /*Bytes:(Count+1)x16 */
+
+/* AES/Copy engine control register */
+#define C7108_AES_CTRL (0x007c) /* AES control */
+#define C7108_AES_CTRL_RS (1<<0) /* Which set of src/dst to use */
+
+/* AES Cipher mode, controlled by setting Bits 2:0 */
+#define C7108_AES_CTRL_MODE_CBC 0
+#define C7108_AES_CTRL_MODE_CFB (1<<0)
+#define C7108_AES_CTRL_MODE_OFB (1<<1)
+#define C7108_AES_CTRL_MODE_CTR ((1<<0)|(1<<1))
+#define C7108_AES_CTRL_MODE_ECB (1<<2)
+
+/* AES Key length , Bits 5:4 */
+#define C7108_AES_KEY_LEN_128 0 /* 00 */
+#define C7108_AES_KEY_LEN_192 (1<<4) /* 01 */
+#define C7108_AES_KEY_LEN_256 (1<<5) /* 10 */
+
+/* AES Operation (crypt/decrypt), Bit 3 */
+#define C7108_AES_DECRYPT (1<<3) /* Clear for encrypt */
+#define C7108_AES_ENCRYPT 0
+#define C7108_AES_INTR (1<<13) /* Set on done trans from 0->1*/
+#define C7108_AES_GO (1<<14) /* Run */
+#define C7108_AES_OP_DONE (1<<15) /* Set when complete */
+
+
+/* Expanded key registers */
+#define C7108_AES_EKEY0_LO (0x0080)
+#define C7108_AES_EKEY0_HI (0x0084)
+#define C7108_AES_EKEY1_LO (0x0088)
+#define C7108_AES_EKEY1_HI (0x008c)
+#define C7108_AES_EKEY2_LO (0x0090)
+#define C7108_AES_EKEY2_HI (0x0094)
+#define C7108_AES_EKEY3_LO (0x0098)
+#define C7108_AES_EKEY3_HI (0x009c)
+#define C7108_AES_EKEY4_LO (0x00a0)
+#define C7108_AES_EKEY4_HI (0x00a4)
+#define C7108_AES_EKEY5_LO (0x00a8)
+#define C7108_AES_EKEY5_HI (0x00ac)
+#define C7108_AES_EKEY6_LO (0x00b0)
+#define C7108_AES_EKEY6_HI (0x00b4)
+#define C7108_AES_EKEY7_LO (0x00b8)
+#define C7108_AES_EKEY7_HI (0x00bc)
+#define C7108_AES_OK (0x00fc) /* Reset: "OK" */
+
+#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
+
+/* Software session entry */
+
+#define HW_TYPE_CIPHER 0
+#define SW_TYPE_HMAC 1
+#define SW_TYPE_AUTH2 2
+#define SW_TYPE_HASH 3
+#define SW_TYPE_COMP 4
+
+struct cipher_7108 {
+ int xfm_type;
+ int cri_alg;
+ union {
+ struct {
+ char sw_key[HMAC_BLOCK_LEN];
+ int sw_klen;
+ int sw_authlen;
+ } hmac;
+ } u;
+ struct cipher_7108 *next;
+};
+
+
+
+#endif /* __C7108_AES_7108_H__ */
/* $OpenBSD: criov.c,v 1.9 2002/01/29 15:48:29 jason Exp $ */
/*
- * Linux port done by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2006-2007 David McCullough
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
* Copyright (C) 2004-2005 Intel Corporation.
* The license and original author are listed below.
*
/*-
- * Linux port done by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2006-2007 David McCullough
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
* Copyright (C) 2004-2005 Intel Corporation.
* The license and original author are listed below.
*
#define CRYPTOCAP_F_CLEANUP 0x80000000 /* needs resource cleanup */
int cc_qblocked; /* (q) symmetric q blocked */
int cc_kqblocked; /* (q) asymmetric q blocked */
+
+ int cc_unqblocked; /* (q) symmetric q blocked */
+ int cc_unkqblocked; /* (q) asymmetric q blocked */
};
static struct cryptocap *crypto_drivers = NULL;
static int crypto_drivers_num = 0;
static struct kmem_cache *cryptodesc_zone;
#endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+#include <linux/sched.h>
+#define kill_proc(p,s,v) send_sig(s,find_task_by_vpid(p),0)
+#endif
+
#define debug crypto_debug
int crypto_debug = 0;
module_param(crypto_debug, int, 0644);
MODULE_PARM_DESC(crypto_devallowsoft,
"Enable/disable use of software crypto support");
+/*
+ * This parameter controls the maximum number of crypto operations to
+ * do consecutively in the crypto kernel thread before scheduling to allow
+ * other processes to run. Without it, it is possible to get into a
+ * situation where the crypto thread never allows any other processes to run.
+ * Default to 1000 which should be less than one second.
+ */
+static int crypto_max_loopcount = 1000;
+module_param(crypto_max_loopcount, int, 0644);
+MODULE_PARM_DESC(crypto_max_loopcount,
+ "Maximum number of crypto ops to do before yielding to other processes");
+
static pid_t cryptoproc = (pid_t) -1;
static struct completion cryptoproc_exited;
static DECLARE_WAIT_QUEUE_HEAD(cryptoproc_wait);
if (cap != NULL) {
if (what & CRYPTO_SYMQ) {
cap->cc_qblocked = 0;
+ cap->cc_unqblocked = 0;
crypto_all_qblocked = 0;
}
if (what & CRYPTO_ASYMQ) {
cap->cc_kqblocked = 0;
+ cap->cc_unkqblocked = 0;
crypto_all_kqblocked = 0;
}
if (crp_sleep)
}
crypto_q_cnt++;
+ /* make sure we are starting a fresh run on this crp. */
+ crp->crp_flags &= ~CRYPTO_F_DONE;
+ crp->crp_etype = 0;
+
/*
* Caller marked the request to be processed immediately; dispatch
* it directly to the driver unless the driver is currently blocked.
KASSERT(cap != NULL, ("%s: Driver disappeared.", __func__));
if (!cap->cc_qblocked) {
crypto_all_qblocked = 0;
- crypto_drivers[hid].cc_qblocked = 1;
+ crypto_drivers[hid].cc_unqblocked = 1;
CRYPTO_Q_UNLOCK();
result = crypto_invoke(cap, crp, 0);
CRYPTO_Q_LOCK();
- if (result != ERESTART)
- crypto_drivers[hid].cc_qblocked = 0;
+ if (result == ERESTART)
+ if (crypto_drivers[hid].cc_unqblocked)
+ crypto_drivers[hid].cc_qblocked = 1;
+ crypto_drivers[hid].cc_unqblocked = 0;
}
}
if (result == ERESTART) {
*/
list_add(&crp->crp_next, &crp_q);
cryptostats.cs_blocks++;
+ result = 0;
} else if (result == -1) {
TAILQ_INSERT_TAIL(&crp_q, crp, crp_next);
+ result = 0;
}
if (crp_sleep)
wake_up_interruptible(&cryptoproc_wait);
CRYPTO_Q_UNLOCK();
- return 0;
+ return result;
}
/*
u_int32_t hid;
int result, hint;
unsigned long q_flags;
+ int loopcount = 0;
ocf_daemonize("crypto");
hid = CRYPTO_SESID2HID(submit->crp_sid);
crypto_all_qblocked = 0;
list_del(&submit->crp_next);
- crypto_drivers[hid].cc_qblocked = 1;
+ crypto_drivers[hid].cc_unqblocked = 1;
cap = crypto_checkdriver(hid);
CRYPTO_Q_UNLOCK();
KASSERT(cap != NULL, ("%s:%u Driver disappeared.",
/* XXX validate sid again? */
list_add(&submit->crp_next, &crp_q);
cryptostats.cs_blocks++;
- } else
- crypto_drivers[hid].cc_qblocked=0;
+ if (crypto_drivers[hid].cc_unqblocked)
+ crypto_drivers[hid].cc_qblocked=0;
+ crypto_drivers[hid].cc_unqblocked=0;
+ }
+ crypto_drivers[hid].cc_unqblocked = 0;
}
crypto_all_kqblocked = !list_empty(&crp_kq);
__FUNCTION__,
list_empty(&crp_q), crypto_all_qblocked,
list_empty(&crp_kq), crypto_all_kqblocked);
+ loopcount = 0;
CRYPTO_Q_UNLOCK();
crp_sleep = 1;
wait_event_interruptible(cryptoproc_wait,
if (cryptoproc == (pid_t) -1)
break;
cryptostats.cs_intrs++;
+ } else if (loopcount > crypto_max_loopcount) {
+ /*
+ * Give other processes a chance to run if we've
+ * been using the CPU exclusively for a while.
+ */
+ loopcount = 0;
+ schedule();
}
+ loopcount++;
}
CRYPTO_Q_UNLOCK();
complete_and_exit(&cryptoproc_exited, 0);
{
int error;
- dprintk("%s(0x%x)\n", __FUNCTION__, (int) crypto_init);
+ dprintk("%s(%p)\n", __FUNCTION__, (void *) crypto_init);
if (crypto_initted)
return 0;
module_exit(crypto_exit);
MODULE_LICENSE("BSD");
-MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
MODULE_DESCRIPTION("OCF (OpenBSD Cryptographic Framework)");
--- /dev/null
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_CRYPTOCTEON) += cryptocteon.o
+
+obj ?= .
+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/
+
+ifdef CONFIG_OCF_CRYPTOCTEON
+# you need the cavium crypto component installed
+EXTRA_CFLAGS += -I$(ROOTDIR)/prop/include
+endif
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
--- /dev/null
+/*
+ * Copyright (c) 2009 David McCullough <david.mccullough@securecomputing.com>
+ *
+ * Copyright (c) 2003-2007 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Cavium Networks
+ * 4. Cavium Networks' name may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * This Software, including technical data, may be subject to U.S. export
+ * control laws, including the U.S. Export Administration Act and its
+ * associated regulations, and may be subject to export or import regulations
+ * in other countries. You warrant that You will comply strictly in all
+ * respects with all such regulations and acknowledge that you have the
+ * responsibility to obtain licenses to export, re-export or import the
+ * Software.
+ *
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
+ * WITH ALL FAULTS AND CAVIUM MAKES NO PROMISES, REPRESENTATIONS OR WARRANTIES,
+ * EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO THE
+ * SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
+ * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+*/
+/****************************************************************************/
+
+#include <linux/scatterlist.h>
+#include <asm/octeon/octeon.h>
+#include "octeon-asm.h"
+
+/****************************************************************************/
+
+extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *);
+extern void octeon_crypto_disable(struct octeon_cop2_state *, unsigned long);
+
+#define SG_INIT(s, p, i, l) \
+ { \
+ (i) = 0; \
+ (l) = (s)[0].length; \
+ (p) = (typeof(p)) sg_virt((s)); \
+ CVMX_PREFETCH0((p)); \
+ }
+
+#define SG_CONSUME(s, p, i, l) \
+ { \
+ (p)++; \
+ (l) -= sizeof(*(p)); \
+ if ((l) < 0) { \
+ dprintk("%s, %d: l = %d\n", __FILE__, __LINE__, l); \
+ } else if ((l) == 0) { \
+ (i)++; \
+ (l) = (s)[0].length; \
+ (p) = (typeof(p)) sg_virt(s); \
+ CVMX_PREFETCH0((p)); \
+ } \
+ }
+
+#define ESP_HEADER_LENGTH 8
+#define DES_CBC_IV_LENGTH 8
+#define AES_CBC_IV_LENGTH 16
+#define ESP_HMAC_LEN 12
+
+#define ESP_HEADER_LENGTH 8
+#define DES_CBC_IV_LENGTH 8
+
+/****************************************************************************/
+
+#define CVM_LOAD_SHA_UNIT(dat, next) { \
+ if (next == 0) { \
+ next = 1; \
+ CVMX_MT_HSH_DAT (dat, 0); \
+ } else if (next == 1) { \
+ next = 2; \
+ CVMX_MT_HSH_DAT (dat, 1); \
+ } else if (next == 2) { \
+ next = 3; \
+ CVMX_MT_HSH_DAT (dat, 2); \
+ } else if (next == 3) { \
+ next = 4; \
+ CVMX_MT_HSH_DAT (dat, 3); \
+ } else if (next == 4) { \
+ next = 5; \
+ CVMX_MT_HSH_DAT (dat, 4); \
+ } else if (next == 5) { \
+ next = 6; \
+ CVMX_MT_HSH_DAT (dat, 5); \
+ } else if (next == 6) { \
+ next = 7; \
+ CVMX_MT_HSH_DAT (dat, 6); \
+ } else { \
+ CVMX_MT_HSH_STARTSHA (dat); \
+ next = 0; \
+ } \
+}
+
+#define CVM_LOAD2_SHA_UNIT(dat1, dat2, next) { \
+ if (next == 0) { \
+ CVMX_MT_HSH_DAT (dat1, 0); \
+ CVMX_MT_HSH_DAT (dat2, 1); \
+ next = 2; \
+ } else if (next == 1) { \
+ CVMX_MT_HSH_DAT (dat1, 1); \
+ CVMX_MT_HSH_DAT (dat2, 2); \
+ next = 3; \
+ } else if (next == 2) { \
+ CVMX_MT_HSH_DAT (dat1, 2); \
+ CVMX_MT_HSH_DAT (dat2, 3); \
+ next = 4; \
+ } else if (next == 3) { \
+ CVMX_MT_HSH_DAT (dat1, 3); \
+ CVMX_MT_HSH_DAT (dat2, 4); \
+ next = 5; \
+ } else if (next == 4) { \
+ CVMX_MT_HSH_DAT (dat1, 4); \
+ CVMX_MT_HSH_DAT (dat2, 5); \
+ next = 6; \
+ } else if (next == 5) { \
+ CVMX_MT_HSH_DAT (dat1, 5); \
+ CVMX_MT_HSH_DAT (dat2, 6); \
+ next = 7; \
+ } else if (next == 6) { \
+ CVMX_MT_HSH_DAT (dat1, 6); \
+ CVMX_MT_HSH_STARTSHA (dat2); \
+ next = 0; \
+ } else { \
+ CVMX_MT_HSH_STARTSHA (dat1); \
+ CVMX_MT_HSH_DAT (dat2, 0); \
+ next = 1; \
+ } \
+}
+
+/****************************************************************************/
+
+#define CVM_LOAD_MD5_UNIT(dat, next) { \
+ if (next == 0) { \
+ next = 1; \
+ CVMX_MT_HSH_DAT (dat, 0); \
+ } else if (next == 1) { \
+ next = 2; \
+ CVMX_MT_HSH_DAT (dat, 1); \
+ } else if (next == 2) { \
+ next = 3; \
+ CVMX_MT_HSH_DAT (dat, 2); \
+ } else if (next == 3) { \
+ next = 4; \
+ CVMX_MT_HSH_DAT (dat, 3); \
+ } else if (next == 4) { \
+ next = 5; \
+ CVMX_MT_HSH_DAT (dat, 4); \
+ } else if (next == 5) { \
+ next = 6; \
+ CVMX_MT_HSH_DAT (dat, 5); \
+ } else if (next == 6) { \
+ next = 7; \
+ CVMX_MT_HSH_DAT (dat, 6); \
+ } else { \
+ CVMX_MT_HSH_STARTMD5 (dat); \
+ next = 0; \
+ } \
+}
+
+#define CVM_LOAD2_MD5_UNIT(dat1, dat2, next) { \
+ if (next == 0) { \
+ CVMX_MT_HSH_DAT (dat1, 0); \
+ CVMX_MT_HSH_DAT (dat2, 1); \
+ next = 2; \
+ } else if (next == 1) { \
+ CVMX_MT_HSH_DAT (dat1, 1); \
+ CVMX_MT_HSH_DAT (dat2, 2); \
+ next = 3; \
+ } else if (next == 2) { \
+ CVMX_MT_HSH_DAT (dat1, 2); \
+ CVMX_MT_HSH_DAT (dat2, 3); \
+ next = 4; \
+ } else if (next == 3) { \
+ CVMX_MT_HSH_DAT (dat1, 3); \
+ CVMX_MT_HSH_DAT (dat2, 4); \
+ next = 5; \
+ } else if (next == 4) { \
+ CVMX_MT_HSH_DAT (dat1, 4); \
+ CVMX_MT_HSH_DAT (dat2, 5); \
+ next = 6; \
+ } else if (next == 5) { \
+ CVMX_MT_HSH_DAT (dat1, 5); \
+ CVMX_MT_HSH_DAT (dat2, 6); \
+ next = 7; \
+ } else if (next == 6) { \
+ CVMX_MT_HSH_DAT (dat1, 6); \
+ CVMX_MT_HSH_STARTMD5 (dat2); \
+ next = 0; \
+ } else { \
+ CVMX_MT_HSH_STARTMD5 (dat1); \
+ CVMX_MT_HSH_DAT (dat2, 0); \
+ next = 1; \
+ } \
+}
+
+/****************************************************************************/
+
+static inline uint64_t
+swap64(uint64_t a)
+{
+ return ((a >> 56) |
+ (((a >> 48) & 0xfful) << 8) |
+ (((a >> 40) & 0xfful) << 16) |
+ (((a >> 32) & 0xfful) << 24) |
+ (((a >> 24) & 0xfful) << 32) |
+ (((a >> 16) & 0xfful) << 40) |
+ (((a >> 8) & 0xfful) << 48) | (((a >> 0) & 0xfful) << 56));
+}
+
+/****************************************************************************/
+
+void
+octo_calc_hash(__u8 auth, unsigned char *key, uint64_t *inner, uint64_t *outer)
+{
+ uint8_t hash_key[64];
+ uint64_t *key1;
+ register uint64_t xor1 = 0x3636363636363636ULL;
+ register uint64_t xor2 = 0x5c5c5c5c5c5c5c5cULL;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ memset(hash_key, 0, sizeof(hash_key));
+ memcpy(hash_key, (uint8_t *) key, (auth ? 20 : 16));
+ key1 = (uint64_t *) hash_key;
+ flags = octeon_crypto_enable(&state);
+ if (auth) {
+ CVMX_MT_HSH_IV(0x67452301EFCDAB89ULL, 0);
+ CVMX_MT_HSH_IV(0x98BADCFE10325476ULL, 1);
+ CVMX_MT_HSH_IV(0xC3D2E1F000000000ULL, 2);
+ } else {
+ CVMX_MT_HSH_IV(0x0123456789ABCDEFULL, 0);
+ CVMX_MT_HSH_IV(0xFEDCBA9876543210ULL, 1);
+ }
+
+ CVMX_MT_HSH_DAT((*key1 ^ xor1), 0);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor1), 1);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor1), 2);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor1), 3);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor1), 4);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor1), 5);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor1), 6);
+ key1++;
+ if (auth)
+ CVMX_MT_HSH_STARTSHA((*key1 ^ xor1));
+ else
+ CVMX_MT_HSH_STARTMD5((*key1 ^ xor1));
+
+ CVMX_MF_HSH_IV(inner[0], 0);
+ CVMX_MF_HSH_IV(inner[1], 1);
+ if (auth) {
+ inner[2] = 0;
+ CVMX_MF_HSH_IV(((uint64_t *) inner)[2], 2);
+ }
+
+ memset(hash_key, 0, sizeof(hash_key));
+ memcpy(hash_key, (uint8_t *) key, (auth ? 20 : 16));
+ key1 = (uint64_t *) hash_key;
+ if (auth) {
+ CVMX_MT_HSH_IV(0x67452301EFCDAB89ULL, 0);
+ CVMX_MT_HSH_IV(0x98BADCFE10325476ULL, 1);
+ CVMX_MT_HSH_IV(0xC3D2E1F000000000ULL, 2);
+ } else {
+ CVMX_MT_HSH_IV(0x0123456789ABCDEFULL, 0);
+ CVMX_MT_HSH_IV(0xFEDCBA9876543210ULL, 1);
+ }
+
+ CVMX_MT_HSH_DAT((*key1 ^ xor2), 0);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor2), 1);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor2), 2);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor2), 3);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor2), 4);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor2), 5);
+ key1++;
+ CVMX_MT_HSH_DAT((*key1 ^ xor2), 6);
+ key1++;
+ if (auth)
+ CVMX_MT_HSH_STARTSHA((*key1 ^ xor2));
+ else
+ CVMX_MT_HSH_STARTMD5((*key1 ^ xor2));
+
+ CVMX_MF_HSH_IV(outer[0], 0);
+ CVMX_MF_HSH_IV(outer[1], 1);
+ if (auth) {
+ outer[2] = 0;
+ CVMX_MF_HSH_IV(outer[2], 2);
+ }
+ octeon_crypto_disable(&state, flags);
+ return;
+}
+
+/****************************************************************************/
+/* DES functions */
+
+int
+octo_des_cbc_encrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ uint64_t *data;
+ int data_i, data_l;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load 3DES Key */
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ if (od->octo_encklen == 24) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ } else if (od->octo_encklen == 8) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+
+ CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+ while (crypt_off > 0) {
+ SG_CONSUME(sg, data, data_i, data_l);
+ crypt_off -= 8;
+ }
+
+ while (crypt_len > 0) {
+ CVMX_MT_3DES_ENC_CBC(*data);
+ CVMX_MF_3DES_RESULT(*data);
+ SG_CONSUME(sg, data, data_i, data_l);
+ crypt_len -= 8;
+ }
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+
+int
+octo_des_cbc_decrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ uint64_t *data;
+ int data_i, data_l;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load 3DES Key */
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ if (od->octo_encklen == 24) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ } else if (od->octo_encklen == 8) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+
+ CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+ while (crypt_off > 0) {
+ SG_CONSUME(sg, data, data_i, data_l);
+ crypt_off -= 8;
+ }
+
+ while (crypt_len > 0) {
+ CVMX_MT_3DES_DEC_CBC(*data);
+ CVMX_MF_3DES_RESULT(*data);
+ SG_CONSUME(sg, data, data_i, data_l);
+ crypt_len -= 8;
+ }
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+/****************************************************************************/
+/* AES functions */
+
+int
+octo_aes_cbc_encrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ uint64_t *data, *pdata;
+ int data_i, data_l;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load AES Key */
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+ if (od->octo_encklen == 16) {
+ CVMX_MT_AES_KEY(0x0, 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 24) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 32) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+ CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+ while (crypt_off > 0) {
+ SG_CONSUME(sg, data, data_i, data_l);
+ crypt_off -= 8;
+ }
+
+ while (crypt_len > 0) {
+ pdata = data;
+ CVMX_MT_AES_ENC_CBC0(*data);
+ SG_CONSUME(sg, data, data_i, data_l);
+ CVMX_MT_AES_ENC_CBC1(*data);
+ CVMX_MF_AES_RESULT(*pdata, 0);
+ CVMX_MF_AES_RESULT(*data, 1);
+ SG_CONSUME(sg, data, data_i, data_l);
+ crypt_len -= 16;
+ }
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+
+int
+octo_aes_cbc_decrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ uint64_t *data, *pdata;
+ int data_i, data_l;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load AES Key */
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+ if (od->octo_encklen == 16) {
+ CVMX_MT_AES_KEY(0x0, 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 24) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 32) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+ CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+ while (crypt_off > 0) {
+ SG_CONSUME(sg, data, data_i, data_l);
+ crypt_off -= 8;
+ }
+
+ while (crypt_len > 0) {
+ pdata = data;
+ CVMX_MT_AES_DEC_CBC0(*data);
+ SG_CONSUME(sg, data, data_i, data_l);
+ CVMX_MT_AES_DEC_CBC1(*data);
+ CVMX_MF_AES_RESULT(*pdata, 0);
+ CVMX_MF_AES_RESULT(*data, 1);
+ SG_CONSUME(sg, data, data_i, data_l);
+ crypt_len -= 16;
+ }
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+/****************************************************************************/
+/* MD5 */
+
+int
+octo_null_md5_encrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ register int next = 0;
+ uint64_t *data;
+ uint64_t tmp1, tmp2;
+ int data_i, data_l, alen = auth_len;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 ||
+ (auth_off & 0x7) || (auth_off + auth_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data, data_i, data_l);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* Load MD5 IV */
+ CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+
+ while (auth_off > 0) {
+ SG_CONSUME(sg, data, data_i, data_l);
+ auth_off -= 8;
+ }
+
+ while (auth_len > 0) {
+ CVM_LOAD_MD5_UNIT(*data, next);
+ auth_len -= 8;
+ SG_CONSUME(sg, data, data_i, data_l);
+ }
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_MD5_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* Finish Inner hash */
+ while (next != 7) {
+ CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next);
+ }
+ CVMX_ES64(tmp1, ((alen + 64) << 3));
+ CVM_LOAD_MD5_UNIT(tmp1, next);
+
+ /* Get the inner hash of HMAC */
+ CVMX_MF_HSH_IV(tmp1, 0);
+ CVMX_MF_HSH_IV(tmp2, 1);
+
+ /* Initialize hash unit */
+ CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+
+ CVMX_MT_HSH_DAT(tmp1, 0);
+ CVMX_MT_HSH_DAT(tmp2, 1);
+ CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2);
+ CVMX_MT_HSH_DATZ(3);
+ CVMX_MT_HSH_DATZ(4);
+ CVMX_MT_HSH_DATZ(5);
+ CVMX_MT_HSH_DATZ(6);
+ CVMX_ES64(tmp1, ((64 + 16) << 3));
+ CVMX_MT_HSH_STARTMD5(tmp1);
+
+ /* save the HMAC */
+ SG_INIT(sg, data, data_i, data_l);
+ while (icv_off > 0) {
+ SG_CONSUME(sg, data, data_i, data_l);
+ icv_off -= 8;
+ }
+ CVMX_MF_HSH_IV(*data, 0);
+ SG_CONSUME(sg, data, data_i, data_l);
+ CVMX_MF_HSH_IV(tmp1, 1);
+ *(uint32_t *)data = (uint32_t) (tmp1 >> 32);
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+/****************************************************************************/
+/* SHA1 */
+
+int
+octo_null_sha1_encrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ register int next = 0;
+ uint64_t *data;
+ uint64_t tmp1, tmp2, tmp3;
+ int data_i, data_l, alen = auth_len;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 ||
+ (auth_off & 0x7) || (auth_off + auth_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data, data_i, data_l);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* Load SHA1 IV */
+ CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+ CVMX_MT_HSH_IV(od->octo_hminner[2], 2);
+
+ while (auth_off > 0) {
+ SG_CONSUME(sg, data, data_i, data_l);
+ auth_off -= 8;
+ }
+
+ while (auth_len > 0) {
+ CVM_LOAD_SHA_UNIT(*data, next);
+ auth_len -= 8;
+ SG_CONSUME(sg, data, data_i, data_l);
+ }
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_MD5_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* Finish Inner hash */
+ while (next != 7) {
+ CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next);
+ }
+ CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next);
+
+ /* Get the inner hash of HMAC */
+ CVMX_MF_HSH_IV(tmp1, 0);
+ CVMX_MF_HSH_IV(tmp2, 1);
+ tmp3 = 0;
+ CVMX_MF_HSH_IV(tmp3, 2);
+
+ /* Initialize hash unit */
+ CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+ CVMX_MT_HSH_IV(od->octo_hmouter[2], 2);
+
+ CVMX_MT_HSH_DAT(tmp1, 0);
+ CVMX_MT_HSH_DAT(tmp2, 1);
+ tmp3 |= 0x0000000080000000;
+ CVMX_MT_HSH_DAT(tmp3, 2);
+ CVMX_MT_HSH_DATZ(3);
+ CVMX_MT_HSH_DATZ(4);
+ CVMX_MT_HSH_DATZ(5);
+ CVMX_MT_HSH_DATZ(6);
+ CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3));
+
+ /* save the HMAC */
+ SG_INIT(sg, data, data_i, data_l);
+ while (icv_off > 0) {
+ SG_CONSUME(sg, data, data_i, data_l);
+ icv_off -= 8;
+ }
+ CVMX_MF_HSH_IV(*data, 0);
+ SG_CONSUME(sg, data, data_i, data_l);
+ CVMX_MF_HSH_IV(tmp1, 1);
+ *(uint32_t *)data = (uint32_t) (tmp1 >> 32);
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+/****************************************************************************/
+/* DES MD5 */
+
+int
+octo_des_cbc_md5_encrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ register int next = 0;
+ union {
+ uint32_t data32[2];
+ uint64_t data64[1];
+ } mydata;
+ uint64_t *data = &mydata.data64[0];
+ uint32_t *data32;
+ uint64_t tmp1, tmp2;
+ int data_i, data_l, alen = auth_len;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+ (crypt_len & 0x7) ||
+ (auth_len & 0x7) ||
+ (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data32, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load 3DES Key */
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ if (od->octo_encklen == 24) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ } else if (od->octo_encklen == 8) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+
+ CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+ /* Load MD5 IV */
+ CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+
+ while (crypt_off > 0 && auth_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ crypt_off -= 4;
+ auth_off -= 4;
+ }
+
+ while (crypt_len > 0 || auth_len > 0) {
+ uint32_t *first = data32;
+ mydata.data32[0] = *first;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata.data32[1] = *data32;
+ if (crypt_off <= 0) {
+ if (crypt_len > 0) {
+ CVMX_MT_3DES_ENC_CBC(*data);
+ CVMX_MF_3DES_RESULT(*data);
+ crypt_len -= 8;
+ }
+ } else
+ crypt_off -= 8;
+ if (auth_off <= 0) {
+ if (auth_len > 0) {
+ CVM_LOAD_MD5_UNIT(*data, next);
+ auth_len -= 8;
+ }
+ } else
+ auth_off -= 8;
+ *first = mydata.data32[0];
+ *data32 = mydata.data32[1];
+ SG_CONSUME(sg, data32, data_i, data_l);
+ }
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_MD5_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* Finish Inner hash */
+ while (next != 7) {
+ CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next);
+ }
+ CVMX_ES64(tmp1, ((alen + 64) << 3));
+ CVM_LOAD_MD5_UNIT(tmp1, next);
+
+ /* Get the inner hash of HMAC */
+ CVMX_MF_HSH_IV(tmp1, 0);
+ CVMX_MF_HSH_IV(tmp2, 1);
+
+ /* Initialize hash unit */
+ CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+
+ CVMX_MT_HSH_DAT(tmp1, 0);
+ CVMX_MT_HSH_DAT(tmp2, 1);
+ CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2);
+ CVMX_MT_HSH_DATZ(3);
+ CVMX_MT_HSH_DATZ(4);
+ CVMX_MT_HSH_DATZ(5);
+ CVMX_MT_HSH_DATZ(6);
+ CVMX_ES64(tmp1, ((64 + 16) << 3));
+ CVMX_MT_HSH_STARTMD5(tmp1);
+
+ /* save the HMAC */
+ SG_INIT(sg, data32, data_i, data_l);
+ while (icv_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ icv_off -= 4;
+ }
+ CVMX_MF_HSH_IV(tmp1, 0);
+ *data32 = (uint32_t) (tmp1 >> 32);
+ SG_CONSUME(sg, data32, data_i, data_l);
+ *data32 = (uint32_t) tmp1;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVMX_MF_HSH_IV(tmp1, 1);
+ *data32 = (uint32_t) (tmp1 >> 32);
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+int
+octo_des_cbc_md5_decrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ register int next = 0;
+ union {
+ uint32_t data32[2];
+ uint64_t data64[1];
+ } mydata;
+ uint64_t *data = &mydata.data64[0];
+ uint32_t *data32;
+ uint64_t tmp1, tmp2;
+ int data_i, data_l, alen = auth_len;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+ (crypt_len & 0x7) ||
+ (auth_len & 0x7) ||
+ (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data32, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load 3DES Key */
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ if (od->octo_encklen == 24) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ } else if (od->octo_encklen == 8) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+
+ CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+ /* Load MD5 IV */
+ CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+
+ while (crypt_off > 0 && auth_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ crypt_off -= 4;
+ auth_off -= 4;
+ }
+
+ while (crypt_len > 0 || auth_len > 0) {
+ uint32_t *first = data32;
+ mydata.data32[0] = *first;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata.data32[1] = *data32;
+ if (auth_off <= 0) {
+ if (auth_len > 0) {
+ CVM_LOAD_MD5_UNIT(*data, next);
+ auth_len -= 8;
+ }
+ } else
+ auth_off -= 8;
+ if (crypt_off <= 0) {
+ if (crypt_len > 0) {
+ CVMX_MT_3DES_DEC_CBC(*data);
+ CVMX_MF_3DES_RESULT(*data);
+ crypt_len -= 8;
+ }
+ } else
+ crypt_off -= 8;
+ *first = mydata.data32[0];
+ *data32 = mydata.data32[1];
+ SG_CONSUME(sg, data32, data_i, data_l);
+ }
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_MD5_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* Finish Inner hash */
+ while (next != 7) {
+ CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next);
+ }
+ CVMX_ES64(tmp1, ((alen + 64) << 3));
+ CVM_LOAD_MD5_UNIT(tmp1, next);
+
+ /* Get the inner hash of HMAC */
+ CVMX_MF_HSH_IV(tmp1, 0);
+ CVMX_MF_HSH_IV(tmp2, 1);
+
+ /* Initialize hash unit */
+ CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+
+ CVMX_MT_HSH_DAT(tmp1, 0);
+ CVMX_MT_HSH_DAT(tmp2, 1);
+ CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2);
+ CVMX_MT_HSH_DATZ(3);
+ CVMX_MT_HSH_DATZ(4);
+ CVMX_MT_HSH_DATZ(5);
+ CVMX_MT_HSH_DATZ(6);
+ CVMX_ES64(tmp1, ((64 + 16) << 3));
+ CVMX_MT_HSH_STARTMD5(tmp1);
+
+ /* save the HMAC */
+ SG_INIT(sg, data32, data_i, data_l);
+ while (icv_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ icv_off -= 4;
+ }
+ CVMX_MF_HSH_IV(tmp1, 0);
+ *data32 = (uint32_t) (tmp1 >> 32);
+ SG_CONSUME(sg, data32, data_i, data_l);
+ *data32 = (uint32_t) tmp1;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVMX_MF_HSH_IV(tmp1, 1);
+ *data32 = (uint32_t) (tmp1 >> 32);
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+/****************************************************************************/
+/* DES SHA */
+
+int
+octo_des_cbc_sha1_encrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ register int next = 0;
+ union {
+ uint32_t data32[2];
+ uint64_t data64[1];
+ } mydata;
+ uint64_t *data = &mydata.data64[0];
+ uint32_t *data32;
+ uint64_t tmp1, tmp2, tmp3;
+ int data_i, data_l, alen = auth_len;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+ (crypt_len & 0x7) ||
+ (auth_len & 0x7) ||
+ (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data32, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load 3DES Key */
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ if (od->octo_encklen == 24) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ } else if (od->octo_encklen == 8) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+
+ CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+ /* Load SHA1 IV */
+ CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+ CVMX_MT_HSH_IV(od->octo_hminner[2], 2);
+
+ while (crypt_off > 0 && auth_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ crypt_off -= 4;
+ auth_off -= 4;
+ }
+
+ while (crypt_len > 0 || auth_len > 0) {
+ uint32_t *first = data32;
+ mydata.data32[0] = *first;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata.data32[1] = *data32;
+ if (crypt_off <= 0) {
+ if (crypt_len > 0) {
+ CVMX_MT_3DES_ENC_CBC(*data);
+ CVMX_MF_3DES_RESULT(*data);
+ crypt_len -= 8;
+ }
+ } else
+ crypt_off -= 8;
+ if (auth_off <= 0) {
+ if (auth_len > 0) {
+ CVM_LOAD_SHA_UNIT(*data, next);
+ auth_len -= 8;
+ }
+ } else
+ auth_off -= 8;
+ *first = mydata.data32[0];
+ *data32 = mydata.data32[1];
+ SG_CONSUME(sg, data32, data_i, data_l);
+ }
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_SHA_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* Finish Inner hash */
+ while (next != 7) {
+ CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next);
+ }
+ CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next);
+
+ /* Get the inner hash of HMAC */
+ CVMX_MF_HSH_IV(tmp1, 0);
+ CVMX_MF_HSH_IV(tmp2, 1);
+ tmp3 = 0;
+ CVMX_MF_HSH_IV(tmp3, 2);
+
+ /* Initialize hash unit */
+ CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+ CVMX_MT_HSH_IV(od->octo_hmouter[2], 2);
+
+ CVMX_MT_HSH_DAT(tmp1, 0);
+ CVMX_MT_HSH_DAT(tmp2, 1);
+ tmp3 |= 0x0000000080000000;
+ CVMX_MT_HSH_DAT(tmp3, 2);
+ CVMX_MT_HSH_DATZ(3);
+ CVMX_MT_HSH_DATZ(4);
+ CVMX_MT_HSH_DATZ(5);
+ CVMX_MT_HSH_DATZ(6);
+ CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3));
+
+ /* save the HMAC */
+ SG_INIT(sg, data32, data_i, data_l);
+ while (icv_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ icv_off -= 4;
+ }
+ CVMX_MF_HSH_IV(tmp1, 0);
+ *data32 = (uint32_t) (tmp1 >> 32);
+ SG_CONSUME(sg, data32, data_i, data_l);
+ *data32 = (uint32_t) tmp1;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVMX_MF_HSH_IV(tmp1, 1);
+ *data32 = (uint32_t) (tmp1 >> 32);
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+int
+octo_des_cbc_sha1_decrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ register int next = 0;
+ union {
+ uint32_t data32[2];
+ uint64_t data64[1];
+ } mydata;
+ uint64_t *data = &mydata.data64[0];
+ uint32_t *data32;
+ uint64_t tmp1, tmp2, tmp3;
+ int data_i, data_l, alen = auth_len;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+ (crypt_len & 0x7) ||
+ (auth_len & 0x7) ||
+ (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data32, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load 3DES Key */
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ if (od->octo_encklen == 24) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ } else if (od->octo_encklen == 8) {
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+ CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+
+ CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+ /* Load SHA1 IV */
+ CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+ CVMX_MT_HSH_IV(od->octo_hminner[2], 2);
+
+ while (crypt_off > 0 && auth_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ crypt_off -= 4;
+ auth_off -= 4;
+ }
+
+ while (crypt_len > 0 || auth_len > 0) {
+ uint32_t *first = data32;
+ mydata.data32[0] = *first;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata.data32[1] = *data32;
+ if (auth_off <= 0) {
+ if (auth_len > 0) {
+ CVM_LOAD_SHA_UNIT(*data, next);
+ auth_len -= 8;
+ }
+ } else
+ auth_off -= 8;
+ if (crypt_off <= 0) {
+ if (crypt_len > 0) {
+ CVMX_MT_3DES_DEC_CBC(*data);
+ CVMX_MF_3DES_RESULT(*data);
+ crypt_len -= 8;
+ }
+ } else
+ crypt_off -= 8;
+ *first = mydata.data32[0];
+ *data32 = mydata.data32[1];
+ SG_CONSUME(sg, data32, data_i, data_l);
+ }
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_SHA_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* Finish Inner hash */
+ while (next != 7) {
+ CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next);
+ }
+ CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next);
+
+ /* Get the inner hash of HMAC */
+ CVMX_MF_HSH_IV(tmp1, 0);
+ CVMX_MF_HSH_IV(tmp2, 1);
+ tmp3 = 0;
+ CVMX_MF_HSH_IV(tmp3, 2);
+
+ /* Initialize hash unit */
+ CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+ CVMX_MT_HSH_IV(od->octo_hmouter[2], 2);
+
+ CVMX_MT_HSH_DAT(tmp1, 0);
+ CVMX_MT_HSH_DAT(tmp2, 1);
+ tmp3 |= 0x0000000080000000;
+ CVMX_MT_HSH_DAT(tmp3, 2);
+ CVMX_MT_HSH_DATZ(3);
+ CVMX_MT_HSH_DATZ(4);
+ CVMX_MT_HSH_DATZ(5);
+ CVMX_MT_HSH_DATZ(6);
+ CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3));
+ /* save the HMAC */
+ SG_INIT(sg, data32, data_i, data_l);
+ while (icv_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ icv_off -= 4;
+ }
+ CVMX_MF_HSH_IV(tmp1, 0);
+ *data32 = (uint32_t) (tmp1 >> 32);
+ SG_CONSUME(sg, data32, data_i, data_l);
+ *data32 = (uint32_t) tmp1;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVMX_MF_HSH_IV(tmp1, 1);
+ *data32 = (uint32_t) (tmp1 >> 32);
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+/****************************************************************************/
+/* AES MD5 */
+
+int
+octo_aes_cbc_md5_encrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ register int next = 0;
+ union {
+ uint32_t data32[2];
+ uint64_t data64[1];
+ } mydata[2];
+ uint64_t *pdata = &mydata[0].data64[0];
+ uint64_t *data = &mydata[1].data64[0];
+ uint32_t *data32;
+ uint64_t tmp1, tmp2;
+ int data_i, data_l, alen = auth_len;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+ (crypt_len & 0x7) ||
+ (auth_len & 0x7) ||
+ (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data32, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load AES Key */
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+ if (od->octo_encklen == 16) {
+ CVMX_MT_AES_KEY(0x0, 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 24) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 32) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+ CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+ /* Load MD5 IV */
+ CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+
+ while (crypt_off > 0 && auth_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ crypt_off -= 4;
+ auth_off -= 4;
+ }
+
+ /* align auth and crypt */
+ while (crypt_off > 0 && auth_len > 0) {
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVM_LOAD_MD5_UNIT(*pdata, next);
+ crypt_off -= 8;
+ auth_len -= 8;
+ }
+
+ while (crypt_len > 0) {
+ uint32_t *pdata32[3];
+
+ pdata32[0] = data32;
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+
+ pdata32[1] = data32;
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+
+ pdata32[2] = data32;
+ mydata[1].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+
+ mydata[1].data32[1] = *data32;
+
+ CVMX_MT_AES_ENC_CBC0(*pdata);
+ CVMX_MT_AES_ENC_CBC1(*data);
+ CVMX_MF_AES_RESULT(*pdata, 0);
+ CVMX_MF_AES_RESULT(*data, 1);
+ crypt_len -= 16;
+
+ if (auth_len > 0) {
+ CVM_LOAD_MD5_UNIT(*pdata, next);
+ auth_len -= 8;
+ }
+ if (auth_len > 0) {
+ CVM_LOAD_MD5_UNIT(*data, next);
+ auth_len -= 8;
+ }
+
+ *pdata32[0] = mydata[0].data32[0];
+ *pdata32[1] = mydata[0].data32[1];
+ *pdata32[2] = mydata[1].data32[0];
+ *data32 = mydata[1].data32[1];
+
+ SG_CONSUME(sg, data32, data_i, data_l);
+ }
+
+ /* finish any left over hashing */
+ while (auth_len > 0) {
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVM_LOAD_MD5_UNIT(*pdata, next);
+ auth_len -= 8;
+ }
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_MD5_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* Finish Inner hash */
+ while (next != 7) {
+ CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next);
+ }
+ CVMX_ES64(tmp1, ((alen + 64) << 3));
+ CVM_LOAD_MD5_UNIT(tmp1, next);
+
+ /* Get the inner hash of HMAC */
+ CVMX_MF_HSH_IV(tmp1, 0);
+ CVMX_MF_HSH_IV(tmp2, 1);
+
+ /* Initialize hash unit */
+ CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+
+ CVMX_MT_HSH_DAT(tmp1, 0);
+ CVMX_MT_HSH_DAT(tmp2, 1);
+ CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2);
+ CVMX_MT_HSH_DATZ(3);
+ CVMX_MT_HSH_DATZ(4);
+ CVMX_MT_HSH_DATZ(5);
+ CVMX_MT_HSH_DATZ(6);
+ CVMX_ES64(tmp1, ((64 + 16) << 3));
+ CVMX_MT_HSH_STARTMD5(tmp1);
+
+ /* save the HMAC */
+ SG_INIT(sg, data32, data_i, data_l);
+ while (icv_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ icv_off -= 4;
+ }
+ CVMX_MF_HSH_IV(tmp1, 0);
+ *data32 = (uint32_t) (tmp1 >> 32);
+ SG_CONSUME(sg, data32, data_i, data_l);
+ *data32 = (uint32_t) tmp1;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVMX_MF_HSH_IV(tmp1, 1);
+ *data32 = (uint32_t) (tmp1 >> 32);
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+int
+octo_aes_cbc_md5_decrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ register int next = 0;
+ union {
+ uint32_t data32[2];
+ uint64_t data64[1];
+ } mydata[2];
+ uint64_t *pdata = &mydata[0].data64[0];
+ uint64_t *data = &mydata[1].data64[0];
+ uint32_t *data32;
+ uint64_t tmp1, tmp2;
+ int data_i, data_l, alen = auth_len;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+ (crypt_len & 0x7) ||
+ (auth_len & 0x7) ||
+ (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data32, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load AES Key */
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+ if (od->octo_encklen == 16) {
+ CVMX_MT_AES_KEY(0x0, 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 24) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 32) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+ CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+ /* Load MD5 IV */
+ CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+
+ while (crypt_off > 0 && auth_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ crypt_off -= 4;
+ auth_off -= 4;
+ }
+
+ /* align auth and crypt */
+ while (crypt_off > 0 && auth_len > 0) {
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVM_LOAD_MD5_UNIT(*pdata, next);
+ crypt_off -= 8;
+ auth_len -= 8;
+ }
+
+ while (crypt_len > 0) {
+ uint32_t *pdata32[3];
+
+ pdata32[0] = data32;
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ pdata32[1] = data32;
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ pdata32[2] = data32;
+ mydata[1].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[1].data32[1] = *data32;
+
+ if (auth_len > 0) {
+ CVM_LOAD_MD5_UNIT(*pdata, next);
+ auth_len -= 8;
+ }
+
+ if (auth_len > 0) {
+ CVM_LOAD_MD5_UNIT(*data, next);
+ auth_len -= 8;
+ }
+
+ CVMX_MT_AES_DEC_CBC0(*pdata);
+ CVMX_MT_AES_DEC_CBC1(*data);
+ CVMX_MF_AES_RESULT(*pdata, 0);
+ CVMX_MF_AES_RESULT(*data, 1);
+ crypt_len -= 16;
+
+ *pdata32[0] = mydata[0].data32[0];
+ *pdata32[1] = mydata[0].data32[1];
+ *pdata32[2] = mydata[1].data32[0];
+ *data32 = mydata[1].data32[1];
+
+ SG_CONSUME(sg, data32, data_i, data_l);
+ }
+
+ /* finish left over hash if any */
+ while (auth_len > 0) {
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVM_LOAD_MD5_UNIT(*pdata, next);
+ auth_len -= 8;
+ }
+
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_MD5_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* Finish Inner hash */
+ while (next != 7) {
+ CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next);
+ }
+ CVMX_ES64(tmp1, ((alen + 64) << 3));
+ CVM_LOAD_MD5_UNIT(tmp1, next);
+
+ /* Get the inner hash of HMAC */
+ CVMX_MF_HSH_IV(tmp1, 0);
+ CVMX_MF_HSH_IV(tmp2, 1);
+
+ /* Initialize hash unit */
+ CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+
+ CVMX_MT_HSH_DAT(tmp1, 0);
+ CVMX_MT_HSH_DAT(tmp2, 1);
+ CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2);
+ CVMX_MT_HSH_DATZ(3);
+ CVMX_MT_HSH_DATZ(4);
+ CVMX_MT_HSH_DATZ(5);
+ CVMX_MT_HSH_DATZ(6);
+ CVMX_ES64(tmp1, ((64 + 16) << 3));
+ CVMX_MT_HSH_STARTMD5(tmp1);
+
+ /* save the HMAC */
+ SG_INIT(sg, data32, data_i, data_l);
+ while (icv_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ icv_off -= 4;
+ }
+ CVMX_MF_HSH_IV(tmp1, 0);
+ *data32 = (uint32_t) (tmp1 >> 32);
+ SG_CONSUME(sg, data32, data_i, data_l);
+ *data32 = (uint32_t) tmp1;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVMX_MF_HSH_IV(tmp1, 1);
+ *data32 = (uint32_t) (tmp1 >> 32);
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+/****************************************************************************/
+/* AES SHA1 */
+
+int
+octo_aes_cbc_sha1_encrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ register int next = 0;
+ union {
+ uint32_t data32[2];
+ uint64_t data64[1];
+ } mydata[2];
+ uint64_t *pdata = &mydata[0].data64[0];
+ uint64_t *data = &mydata[1].data64[0];
+ uint32_t *data32;
+ uint64_t tmp1, tmp2, tmp3;
+ int data_i, data_l, alen = auth_len;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s(a_off=%d a_len=%d c_off=%d c_len=%d icv_off=%d)\n",
+ __FUNCTION__, auth_off, auth_len, crypt_off, crypt_len, icv_off);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+ (crypt_len & 0x7) ||
+ (auth_len & 0x7) ||
+ (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data32, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load AES Key */
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+ if (od->octo_encklen == 16) {
+ CVMX_MT_AES_KEY(0x0, 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 24) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 32) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+ CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+ /* Load SHA IV */
+ CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+ CVMX_MT_HSH_IV(od->octo_hminner[2], 2);
+
+ while (crypt_off > 0 && auth_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ crypt_off -= 4;
+ auth_off -= 4;
+ }
+
+ /* align auth and crypt */
+ while (crypt_off > 0 && auth_len > 0) {
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVM_LOAD_SHA_UNIT(*pdata, next);
+ crypt_off -= 8;
+ auth_len -= 8;
+ }
+
+ while (crypt_len > 0) {
+ uint32_t *pdata32[3];
+
+ pdata32[0] = data32;
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ pdata32[1] = data32;
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ pdata32[2] = data32;
+ mydata[1].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[1].data32[1] = *data32;
+
+ CVMX_MT_AES_ENC_CBC0(*pdata);
+ CVMX_MT_AES_ENC_CBC1(*data);
+ CVMX_MF_AES_RESULT(*pdata, 0);
+ CVMX_MF_AES_RESULT(*data, 1);
+ crypt_len -= 16;
+
+ if (auth_len > 0) {
+ CVM_LOAD_SHA_UNIT(*pdata, next);
+ auth_len -= 8;
+ }
+ if (auth_len > 0) {
+ CVM_LOAD_SHA_UNIT(*data, next);
+ auth_len -= 8;
+ }
+
+ *pdata32[0] = mydata[0].data32[0];
+ *pdata32[1] = mydata[0].data32[1];
+ *pdata32[2] = mydata[1].data32[0];
+ *data32 = mydata[1].data32[1];
+
+ SG_CONSUME(sg, data32, data_i, data_l);
+ }
+
+ /* finish and hashing */
+ while (auth_len > 0) {
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVM_LOAD_SHA_UNIT(*pdata, next);
+ auth_len -= 8;
+ }
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_SHA_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* Finish Inner hash */
+ while (next != 7) {
+ CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next);
+ }
+ CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next);
+
+ /* Get the inner hash of HMAC */
+ CVMX_MF_HSH_IV(tmp1, 0);
+ CVMX_MF_HSH_IV(tmp2, 1);
+ tmp3 = 0;
+ CVMX_MF_HSH_IV(tmp3, 2);
+
+ /* Initialize hash unit */
+ CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+ CVMX_MT_HSH_IV(od->octo_hmouter[2], 2);
+
+ CVMX_MT_HSH_DAT(tmp1, 0);
+ CVMX_MT_HSH_DAT(tmp2, 1);
+ tmp3 |= 0x0000000080000000;
+ CVMX_MT_HSH_DAT(tmp3, 2);
+ CVMX_MT_HSH_DATZ(3);
+ CVMX_MT_HSH_DATZ(4);
+ CVMX_MT_HSH_DATZ(5);
+ CVMX_MT_HSH_DATZ(6);
+ CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3));
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_MD5_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* save the HMAC */
+ SG_INIT(sg, data32, data_i, data_l);
+ while (icv_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ icv_off -= 4;
+ }
+ CVMX_MF_HSH_IV(tmp1, 0);
+ *data32 = (uint32_t) (tmp1 >> 32);
+ SG_CONSUME(sg, data32, data_i, data_l);
+ *data32 = (uint32_t) tmp1;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVMX_MF_HSH_IV(tmp1, 1);
+ *data32 = (uint32_t) (tmp1 >> 32);
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+int
+octo_aes_cbc_sha1_decrypt(
+ struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp)
+{
+ register int next = 0;
+ union {
+ uint32_t data32[2];
+ uint64_t data64[1];
+ } mydata[2];
+ uint64_t *pdata = &mydata[0].data64[0];
+ uint64_t *data = &mydata[1].data64[0];
+ uint32_t *data32;
+ uint64_t tmp1, tmp2, tmp3;
+ int data_i, data_l, alen = auth_len;
+ struct octeon_cop2_state state;
+ unsigned long flags;
+
+ dprintk("%s(a_off=%d a_len=%d c_off=%d c_len=%d icv_off=%d)\n",
+ __FUNCTION__, auth_off, auth_len, crypt_off, crypt_len, icv_off);
+
+ if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+ (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+ (crypt_len & 0x7) ||
+ (auth_len & 0x7) ||
+ (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+ dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+ "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+ "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ return -EINVAL;
+ }
+
+ SG_INIT(sg, data32, data_i, data_l);
+
+ CVMX_PREFETCH0(ivp);
+ CVMX_PREFETCH0(od->octo_enckey);
+
+ flags = octeon_crypto_enable(&state);
+
+ /* load AES Key */
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+ if (od->octo_encklen == 16) {
+ CVMX_MT_AES_KEY(0x0, 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 24) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(0x0, 3);
+ } else if (od->octo_encklen == 32) {
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+ CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+ } else {
+ octeon_crypto_disable(&state, flags);
+ dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+ return -EINVAL;
+ }
+ CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+ CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+ /* Load SHA1 IV */
+ CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+ CVMX_MT_HSH_IV(od->octo_hminner[2], 2);
+
+ while (crypt_off > 0 && auth_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ crypt_off -= 4;
+ auth_off -= 4;
+ }
+
+ /* align auth and crypt */
+ while (crypt_off > 0 && auth_len > 0) {
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVM_LOAD_SHA_UNIT(*pdata, next);
+ crypt_off -= 8;
+ auth_len -= 8;
+ }
+
+ while (crypt_len > 0) {
+ uint32_t *pdata32[3];
+
+ pdata32[0] = data32;
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ pdata32[1] = data32;
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ pdata32[2] = data32;
+ mydata[1].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[1].data32[1] = *data32;
+
+ if (auth_len > 0) {
+ CVM_LOAD_SHA_UNIT(*pdata, next);
+ auth_len -= 8;
+ }
+ if (auth_len > 0) {
+ CVM_LOAD_SHA_UNIT(*data, next);
+ auth_len -= 8;
+ }
+
+ CVMX_MT_AES_DEC_CBC0(*pdata);
+ CVMX_MT_AES_DEC_CBC1(*data);
+ CVMX_MF_AES_RESULT(*pdata, 0);
+ CVMX_MF_AES_RESULT(*data, 1);
+ crypt_len -= 16;
+
+ *pdata32[0] = mydata[0].data32[0];
+ *pdata32[1] = mydata[0].data32[1];
+ *pdata32[2] = mydata[1].data32[0];
+ *data32 = mydata[1].data32[1];
+
+ SG_CONSUME(sg, data32, data_i, data_l);
+ }
+
+ /* finish and leftover hashing */
+ while (auth_len > 0) {
+ mydata[0].data32[0] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ mydata[0].data32[1] = *data32;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVM_LOAD_SHA_UNIT(*pdata, next);
+ auth_len -= 8;
+ }
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_SHA_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* Finish Inner hash */
+ while (next != 7) {
+ CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next);
+ }
+ CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next);
+
+ /* Get the inner hash of HMAC */
+ CVMX_MF_HSH_IV(tmp1, 0);
+ CVMX_MF_HSH_IV(tmp2, 1);
+ tmp3 = 0;
+ CVMX_MF_HSH_IV(tmp3, 2);
+
+ /* Initialize hash unit */
+ CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+ CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+ CVMX_MT_HSH_IV(od->octo_hmouter[2], 2);
+
+ CVMX_MT_HSH_DAT(tmp1, 0);
+ CVMX_MT_HSH_DAT(tmp2, 1);
+ tmp3 |= 0x0000000080000000;
+ CVMX_MT_HSH_DAT(tmp3, 2);
+ CVMX_MT_HSH_DATZ(3);
+ CVMX_MT_HSH_DATZ(4);
+ CVMX_MT_HSH_DATZ(5);
+ CVMX_MT_HSH_DATZ(6);
+ CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3));
+
+ /* finish the hash */
+ CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+ if (unlikely(inplen)) {
+ uint64_t tmp = 0;
+ uint8_t *p = (uint8_t *) & tmp;
+ p[inplen] = 0x80;
+ do {
+ inplen--;
+ p[inplen] = ((uint8_t *) data)[inplen];
+ } while (inplen);
+ CVM_LOAD_MD5_UNIT(tmp, next);
+ } else {
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+ }
+#else
+ CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+ /* save the HMAC */
+ SG_INIT(sg, data32, data_i, data_l);
+ while (icv_off > 0) {
+ SG_CONSUME(sg, data32, data_i, data_l);
+ icv_off -= 4;
+ }
+ CVMX_MF_HSH_IV(tmp1, 0);
+ *data32 = (uint32_t) (tmp1 >> 32);
+ SG_CONSUME(sg, data32, data_i, data_l);
+ *data32 = (uint32_t) tmp1;
+ SG_CONSUME(sg, data32, data_i, data_l);
+ CVMX_MF_HSH_IV(tmp1, 1);
+ *data32 = (uint32_t) (tmp1 >> 32);
+
+ octeon_crypto_disable(&state, flags);
+ return 0;
+}
+
+/****************************************************************************/
--- /dev/null
+/*
+ * Octeon Crypto for OCF
+ *
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2009-2010 David McCullough
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ * 1. distributions of this source code include the above copyright
+ * notice, this list of conditions and the following disclaimer;
+ *
+ * 2. distributions in binary form include the above copyright
+ * notice, this list of conditions and the following disclaimer
+ * in the documentation and/or other associated materials;
+ *
+ * 3. the copyright holder's name is not used to endorse products
+ * built using this software without specific written permission.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ * ---------------------------------------------------------------------------
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/crypto.h>
+#include <linux/mm.h>
+#include <linux/skbuff.h>
+#include <linux/random.h>
+#include <linux/scatterlist.h>
+
+#include <cryptodev.h>
+#include <uio.h>
+
+struct {
+ softc_device_decl sc_dev;
+} octo_softc;
+
+#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
+
+struct octo_sess {
+ int octo_encalg;
+ #define MAX_CIPHER_KEYLEN 64
+ char octo_enckey[MAX_CIPHER_KEYLEN];
+ int octo_encklen;
+
+ int octo_macalg;
+ #define MAX_HASH_KEYLEN 64
+ char octo_mackey[MAX_HASH_KEYLEN];
+ int octo_macklen;
+ int octo_mackey_set;
+
+ int octo_mlen;
+ int octo_ivsize;
+
+#if 0
+ int (*octo_decrypt)(struct scatterlist *sg, int sg_len,
+ uint8_t *key, int key_len, uint8_t * iv,
+ uint64_t *hminner, uint64_t *hmouter);
+
+ int (*octo_encrypt)(struct scatterlist *sg, int sg_len,
+ uint8_t *key, int key_len, uint8_t * iv,
+ uint64_t *hminner, uint64_t *hmouter);
+#else
+ int (*octo_encrypt)(struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp);
+ int (*octo_decrypt)(struct octo_sess *od,
+ struct scatterlist *sg, int sg_len,
+ int auth_off, int auth_len,
+ int crypt_off, int crypt_len,
+ int icv_off, uint8_t *ivp);
+#endif
+
+ uint64_t octo_hminner[3];
+ uint64_t octo_hmouter[3];
+};
+
+int32_t octo_id = -1;
+module_param(octo_id, int, 0444);
+MODULE_PARM_DESC(octo_id, "Read-Only OCF ID for cryptocteon driver");
+
+static struct octo_sess **octo_sessions = NULL;
+static u_int32_t octo_sesnum = 0;
+
+static int octo_process(device_t, struct cryptop *, int);
+static int octo_newsession(device_t, u_int32_t *, struct cryptoini *);
+static int octo_freesession(device_t, u_int64_t);
+
+static device_method_t octo_methods = {
+ /* crypto device methods */
+ DEVMETHOD(cryptodev_newsession, octo_newsession),
+ DEVMETHOD(cryptodev_freesession,octo_freesession),
+ DEVMETHOD(cryptodev_process, octo_process),
+};
+
+#define debug octo_debug
+int octo_debug = 0;
+module_param(octo_debug, int, 0644);
+MODULE_PARM_DESC(octo_debug, "Enable debug");
+
+
+#include "cavium_crypto.c"
+
+
+/*
+ * Generate a new octo session. We artifically limit it to a single
+ * hash/cipher or hash-cipher combo just to make it easier, most callers
+ * do not expect more than this anyway.
+ */
+static int
+octo_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri)
+{
+ struct cryptoini *c, *encini = NULL, *macini = NULL;
+ struct octo_sess **ocd;
+ int i;
+
+ dprintk("%s()\n", __FUNCTION__);
+ if (sid == NULL || cri == NULL) {
+ dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ /*
+ * To keep it simple, we only handle hash, cipher or hash/cipher in a
+ * session, you cannot currently do multiple ciphers/hashes in one
+ * session even though it would be possibel to code this driver to
+ * handle it.
+ */
+ for (i = 0, c = cri; c && i < 2; i++) {
+ if (c->cri_alg == CRYPTO_MD5_HMAC ||
+ c->cri_alg == CRYPTO_SHA1_HMAC ||
+ c->cri_alg == CRYPTO_NULL_HMAC) {
+ if (macini) {
+ break;
+ }
+ macini = c;
+ }
+ if (c->cri_alg == CRYPTO_DES_CBC ||
+ c->cri_alg == CRYPTO_3DES_CBC ||
+ c->cri_alg == CRYPTO_AES_CBC ||
+ c->cri_alg == CRYPTO_NULL_CBC) {
+ if (encini) {
+ break;
+ }
+ encini = c;
+ }
+ c = c->cri_next;
+ }
+ if (!macini && !encini) {
+ dprintk("%s,%d - EINVAL bad cipher/hash or combination\n",
+ __FILE__, __LINE__);
+ return EINVAL;
+ }
+ if (c) {
+ dprintk("%s,%d - EINVAL cannot handle chained cipher/hash combos\n",
+ __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ /*
+ * So we have something we can do, lets setup the session
+ */
+
+ if (octo_sessions) {
+ for (i = 1; i < octo_sesnum; i++)
+ if (octo_sessions[i] == NULL)
+ break;
+ } else
+ i = 1; /* NB: to silence compiler warning */
+
+ if (octo_sessions == NULL || i == octo_sesnum) {
+ if (octo_sessions == NULL) {
+ i = 1; /* We leave octo_sessions[0] empty */
+ octo_sesnum = CRYPTO_SW_SESSIONS;
+ } else
+ octo_sesnum *= 2;
+
+ ocd = kmalloc(octo_sesnum * sizeof(struct octo_sess *), SLAB_ATOMIC);
+ if (ocd == NULL) {
+ /* Reset session number */
+ if (octo_sesnum == CRYPTO_SW_SESSIONS)
+ octo_sesnum = 0;
+ else
+ octo_sesnum /= 2;
+ dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+ return ENOBUFS;
+ }
+ memset(ocd, 0, octo_sesnum * sizeof(struct octo_sess *));
+
+ /* Copy existing sessions */
+ if (octo_sessions) {
+ memcpy(ocd, octo_sessions,
+ (octo_sesnum / 2) * sizeof(struct octo_sess *));
+ kfree(octo_sessions);
+ }
+
+ octo_sessions = ocd;
+ }
+
+ ocd = &octo_sessions[i];
+ *sid = i;
+
+
+ *ocd = (struct octo_sess *) kmalloc(sizeof(struct octo_sess), SLAB_ATOMIC);
+ if (*ocd == NULL) {
+ octo_freesession(NULL, i);
+ dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+ return ENOBUFS;
+ }
+ memset(*ocd, 0, sizeof(struct octo_sess));
+
+ if (encini && encini->cri_key) {
+ (*ocd)->octo_encklen = (encini->cri_klen + 7) / 8;
+ memcpy((*ocd)->octo_enckey, encini->cri_key, (*ocd)->octo_encklen);
+ }
+
+ if (macini && macini->cri_key) {
+ (*ocd)->octo_macklen = (macini->cri_klen + 7) / 8;
+ memcpy((*ocd)->octo_mackey, macini->cri_key, (*ocd)->octo_macklen);
+ }
+
+ (*ocd)->octo_mlen = 0;
+ if (encini && encini->cri_mlen)
+ (*ocd)->octo_mlen = encini->cri_mlen;
+ else if (macini && macini->cri_mlen)
+ (*ocd)->octo_mlen = macini->cri_mlen;
+ else
+ (*ocd)->octo_mlen = 12;
+
+ /*
+ * point c at the enc if it exists, otherwise the mac
+ */
+ c = encini ? encini : macini;
+
+ switch (c->cri_alg) {
+ case CRYPTO_DES_CBC:
+ case CRYPTO_3DES_CBC:
+ (*ocd)->octo_ivsize = 8;
+ switch (macini ? macini->cri_alg : -1) {
+ case CRYPTO_MD5_HMAC:
+ (*ocd)->octo_encrypt = octo_des_cbc_md5_encrypt;
+ (*ocd)->octo_decrypt = octo_des_cbc_md5_decrypt;
+ octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner,
+ (*ocd)->octo_hmouter);
+ break;
+ case CRYPTO_SHA1_HMAC:
+ (*ocd)->octo_encrypt = octo_des_cbc_sha1_encrypt;
+ (*ocd)->octo_decrypt = octo_des_cbc_sha1_encrypt;
+ octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner,
+ (*ocd)->octo_hmouter);
+ break;
+ case -1:
+ (*ocd)->octo_encrypt = octo_des_cbc_encrypt;
+ (*ocd)->octo_decrypt = octo_des_cbc_decrypt;
+ break;
+ default:
+ octo_freesession(NULL, i);
+ dprintk("%s,%d: EINVALn", __FILE__, __LINE__);
+ return EINVAL;
+ }
+ break;
+ case CRYPTO_AES_CBC:
+ (*ocd)->octo_ivsize = 16;
+ switch (macini ? macini->cri_alg : -1) {
+ case CRYPTO_MD5_HMAC:
+ (*ocd)->octo_encrypt = octo_aes_cbc_md5_encrypt;
+ (*ocd)->octo_decrypt = octo_aes_cbc_md5_decrypt;
+ octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner,
+ (*ocd)->octo_hmouter);
+ break;
+ case CRYPTO_SHA1_HMAC:
+ (*ocd)->octo_encrypt = octo_aes_cbc_sha1_encrypt;
+ (*ocd)->octo_decrypt = octo_aes_cbc_sha1_decrypt;
+ octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner,
+ (*ocd)->octo_hmouter);
+ break;
+ case -1:
+ (*ocd)->octo_encrypt = octo_aes_cbc_encrypt;
+ (*ocd)->octo_decrypt = octo_aes_cbc_decrypt;
+ break;
+ default:
+ octo_freesession(NULL, i);
+ dprintk("%s,%d: EINVALn", __FILE__, __LINE__);
+ return EINVAL;
+ }
+ break;
+ case CRYPTO_MD5_HMAC:
+ (*ocd)->octo_encrypt = octo_null_md5_encrypt;
+ (*ocd)->octo_decrypt = octo_null_md5_encrypt;
+ octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner,
+ (*ocd)->octo_hmouter);
+ break;
+ case CRYPTO_SHA1_HMAC:
+ (*ocd)->octo_encrypt = octo_null_sha1_encrypt;
+ (*ocd)->octo_decrypt = octo_null_sha1_encrypt;
+ octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner,
+ (*ocd)->octo_hmouter);
+ break;
+ default:
+ octo_freesession(NULL, i);
+ dprintk("%s,%d: EINVALn", __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ (*ocd)->octo_encalg = encini ? encini->cri_alg : -1;
+ (*ocd)->octo_macalg = macini ? macini->cri_alg : -1;
+
+ return 0;
+}
+
+/*
+ * Free a session.
+ */
+static int
+octo_freesession(device_t dev, u_int64_t tid)
+{
+ u_int32_t sid = CRYPTO_SESID2LID(tid);
+
+ dprintk("%s()\n", __FUNCTION__);
+ if (sid > octo_sesnum || octo_sessions == NULL ||
+ octo_sessions[sid] == NULL) {
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ return(EINVAL);
+ }
+
+ /* Silently accept and return */
+ if (sid == 0)
+ return(0);
+
+ if (octo_sessions[sid])
+ kfree(octo_sessions[sid]);
+ octo_sessions[sid] = NULL;
+ return 0;
+}
+
+/*
+ * Process a request.
+ */
+static int
+octo_process(device_t dev, struct cryptop *crp, int hint)
+{
+ struct cryptodesc *crd;
+ struct octo_sess *od;
+ u_int32_t lid;
+#define SCATTERLIST_MAX 16
+ struct scatterlist sg[SCATTERLIST_MAX];
+ int sg_num, sg_len;
+ struct sk_buff *skb = NULL;
+ struct uio *uiop = NULL;
+ struct cryptodesc *enccrd = NULL, *maccrd = NULL;
+ unsigned char *ivp = NULL;
+ unsigned char iv_data[HASH_MAX_LEN];
+ int auth_off = 0, auth_len = 0, crypt_off = 0, crypt_len = 0, icv_off = 0;
+
+ dprintk("%s()\n", __FUNCTION__);
+ /* Sanity check */
+ if (crp == NULL) {
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ crp->crp_etype = 0;
+
+ if (crp->crp_desc == NULL || crp->crp_buf == NULL) {
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ crp->crp_etype = EINVAL;
+ goto done;
+ }
+
+ lid = crp->crp_sid & 0xffffffff;
+ if (lid >= octo_sesnum || lid == 0 || octo_sessions == NULL ||
+ octo_sessions[lid] == NULL) {
+ crp->crp_etype = ENOENT;
+ dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__);
+ goto done;
+ }
+ od = octo_sessions[lid];
+
+ /*
+ * do some error checking outside of the loop for SKB and IOV processing
+ * this leaves us with valid skb or uiop pointers for later
+ */
+ if (crp->crp_flags & CRYPTO_F_SKBUF) {
+ skb = (struct sk_buff *) crp->crp_buf;
+ if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) {
+ printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", __FILE__, __LINE__,
+ skb_shinfo(skb)->nr_frags);
+ goto done;
+ }
+ } else if (crp->crp_flags & CRYPTO_F_IOV) {
+ uiop = (struct uio *) crp->crp_buf;
+ if (uiop->uio_iovcnt > SCATTERLIST_MAX) {
+ printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", __FILE__, __LINE__,
+ uiop->uio_iovcnt);
+ goto done;
+ }
+ }
+
+ /* point our enccrd and maccrd appropriately */
+ crd = crp->crp_desc;
+ if (crd->crd_alg == od->octo_encalg) enccrd = crd;
+ if (crd->crd_alg == od->octo_macalg) maccrd = crd;
+ crd = crd->crd_next;
+ if (crd) {
+ if (crd->crd_alg == od->octo_encalg) enccrd = crd;
+ if (crd->crd_alg == od->octo_macalg) maccrd = crd;
+ crd = crd->crd_next;
+ }
+ if (crd) {
+ crp->crp_etype = EINVAL;
+ dprintk("%s,%d: ENOENT - descriptors do not match session\n",
+ __FILE__, __LINE__);
+ goto done;
+ }
+
+ if (enccrd) {
+ if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) {
+ ivp = enccrd->crd_iv;
+ } else {
+ ivp = iv_data;
+ crypto_copydata(crp->crp_flags, crp->crp_buf,
+ enccrd->crd_inject, od->octo_ivsize, (caddr_t) ivp);
+ }
+
+ if (maccrd) {
+ auth_off = maccrd->crd_skip;
+ auth_len = maccrd->crd_len;
+ icv_off = maccrd->crd_inject;
+ }
+
+ crypt_off = enccrd->crd_skip;
+ crypt_len = enccrd->crd_len;
+ } else { /* if (maccrd) */
+ auth_off = maccrd->crd_skip;
+ auth_len = maccrd->crd_len;
+ icv_off = maccrd->crd_inject;
+ }
+
+
+ /*
+ * setup the SG list to cover the buffer
+ */
+ memset(sg, 0, sizeof(sg));
+ if (crp->crp_flags & CRYPTO_F_SKBUF) {
+ int i, len;
+
+ sg_num = 0;
+ sg_len = 0;
+
+ len = skb_headlen(skb);
+ sg_set_page(&sg[sg_num], virt_to_page(skb->data), len,
+ offset_in_page(skb->data));
+ sg_len += len;
+ sg_num++;
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags && sg_num < SCATTERLIST_MAX;
+ i++) {
+ len = skb_shinfo(skb)->frags[i].size;
+ sg_set_page(&sg[sg_num], skb_shinfo(skb)->frags[i].page,
+ len, skb_shinfo(skb)->frags[i].page_offset);
+ sg_len += len;
+ sg_num++;
+ }
+ } else if (crp->crp_flags & CRYPTO_F_IOV) {
+ int len;
+
+ sg_len = 0;
+ for (sg_num = 0; sg_len < crp->crp_ilen &&
+ sg_num < uiop->uio_iovcnt &&
+ sg_num < SCATTERLIST_MAX; sg_num++) {
+ len = uiop->uio_iov[sg_num].iov_len;
+ sg_set_page(&sg[sg_num],
+ virt_to_page(uiop->uio_iov[sg_num].iov_base), len,
+ offset_in_page(uiop->uio_iov[sg_num].iov_base));
+ sg_len += len;
+ }
+ } else {
+ sg_len = crp->crp_ilen;
+ sg_set_page(&sg[0], virt_to_page(crp->crp_buf), sg_len,
+ offset_in_page(crp->crp_buf));
+ sg_num = 1;
+ }
+
+
+ /*
+ * setup a new explicit key
+ */
+ if (enccrd) {
+ if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) {
+ od->octo_encklen = (enccrd->crd_klen + 7) / 8;
+ memcpy(od->octo_enckey, enccrd->crd_key, od->octo_encklen);
+ }
+ }
+ if (maccrd) {
+ if (maccrd->crd_flags & CRD_F_KEY_EXPLICIT) {
+ od->octo_macklen = (maccrd->crd_klen + 7) / 8;
+ memcpy(od->octo_mackey, maccrd->crd_key, od->octo_macklen);
+ od->octo_mackey_set = 0;
+ }
+ if (!od->octo_mackey_set) {
+ octo_calc_hash(maccrd->crd_alg == CRYPTO_MD5_HMAC ? 0 : 1,
+ maccrd->crd_key, od->octo_hminner, od->octo_hmouter);
+ od->octo_mackey_set = 1;
+ }
+ }
+
+
+ if (!enccrd || (enccrd->crd_flags & CRD_F_ENCRYPT))
+ (*od->octo_encrypt)(od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+ else
+ (*od->octo_decrypt)(od, sg, sg_len,
+ auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+
+done:
+ crypto_done(crp);
+ return 0;
+}
+
+static int
+cryptocteon_init(void)
+{
+ dprintk("%s(%p)\n", __FUNCTION__, cryptocteon_init);
+
+ softc_device_init(&octo_softc, "cryptocteon", 0, octo_methods);
+
+ octo_id = crypto_get_driverid(softc_get_device(&octo_softc),
+ CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SYNC);
+ if (octo_id < 0) {
+ printk("Cryptocteon device cannot initialize!");
+ return -ENODEV;
+ }
+
+ crypto_register(octo_id, CRYPTO_MD5_HMAC, 0,0);
+ crypto_register(octo_id, CRYPTO_SHA1_HMAC, 0,0);
+ //crypto_register(octo_id, CRYPTO_MD5, 0,0);
+ //crypto_register(octo_id, CRYPTO_SHA1, 0,0);
+ crypto_register(octo_id, CRYPTO_DES_CBC, 0,0);
+ crypto_register(octo_id, CRYPTO_3DES_CBC, 0,0);
+ crypto_register(octo_id, CRYPTO_AES_CBC, 0,0);
+
+ return(0);
+}
+
+static void
+cryptocteon_exit(void)
+{
+ dprintk("%s()\n", __FUNCTION__);
+ crypto_unregister_all(octo_id);
+ octo_id = -1;
+}
+
+module_init(cryptocteon_init);
+module_exit(cryptocteon_exit);
+
+MODULE_LICENSE("BSD");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
+MODULE_DESCRIPTION("Cryptocteon (OCF module for Cavium OCTEON crypto)");
/* $OpenBSD: cryptodev.c,v 1.52 2002/06/19 07:22:46 deraadt Exp $ */
/*-
- * Linux port done by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2006-2007 David McCullough
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
* Copyright (C) 2004-2005 Intel Corporation.
* The license and original author are listed below.
*
u_int16_t keysize;
/* u_int16_t hashsize; */
u_int16_t authsize;
+ u_int16_t authkey;
/* u_int16_t ctxsize; */
};
if (cse->uio.uio_iov[0].iov_base == NULL) {
dprintk("%s: iov_base kmalloc(%d) failed\n", __FUNCTION__,
- cse->uio.uio_iov[0].iov_len);
+ (int)cse->uio.uio_iov[0].iov_len);
return (ENOMEM);
}
goto bail;
}
- if (cse->info.authsize) {
- crda = crp->crp_desc;
- if (cse->info.blocksize)
- crde = crda->crd_next;
- } else {
- if (cse->info.blocksize)
+ if (cse->info.authsize && cse->info.blocksize) {
+ if (cop->op == COP_ENCRYPT) {
crde = crp->crp_desc;
- else {
- dprintk("%s: bad request\n", __FUNCTION__);
- error = EINVAL;
- goto bail;
+ crda = crde->crd_next;
+ } else {
+ crda = crp->crp_desc;
+ crde = crda->crd_next;
}
+ } else if (cse->info.authsize) {
+ crda = crp->crp_desc;
+ } else if (cse->info.blocksize) {
+ crde = crp->crp_desc;
+ } else {
+ dprintk("%s: bad request\n", __FUNCTION__);
+ error = EINVAL;
+ goto bail;
}
if ((error = copy_from_user(cse->uio.uio_iov[0].iov_base, cop->src,
* entry and the crypto_done callback into us.
*/
error = crypto_dispatch(crp);
- if (error == 0) {
- dprintk("%s about to WAIT\n", __FUNCTION__);
+ if (error) {
+ dprintk("%s error in crypto_dispatch\n", __FUNCTION__);
+ goto bail;
+ }
+
+ dprintk("%s about to WAIT\n", __FUNCTION__);
+ /*
+ * we really need to wait for driver to complete to maintain
+ * state, luckily interrupts will be remembered
+ */
+ do {
+ error = wait_event_interruptible(crp->crp_waitq,
+ ((crp->crp_flags & CRYPTO_F_DONE) != 0));
/*
- * we really need to wait for driver to complete to maintain
- * state, luckily interrupts will be remembered
+ * we can't break out of this loop or we will leave behind
+ * a huge mess, however, staying here means if your driver
+ * is broken user applications can hang and not be killed.
+ * The solution, fix your driver :-)
*/
- do {
- error = wait_event_interruptible(crp->crp_waitq,
- ((crp->crp_flags & CRYPTO_F_DONE) != 0));
- /*
- * we can't break out of this loop or we will leave behind
- * a huge mess, however, staying here means if your driver
- * is broken user applications can hang and not be killed.
- * The solution, fix your driver :-)
- */
- if (error) {
- schedule();
- error = 0;
- }
- } while ((crp->crp_flags & CRYPTO_F_DONE) == 0);
- dprintk("%s finished WAITING error=%d\n", __FUNCTION__, error);
- }
+ if (error) {
+ schedule();
+ error = 0;
+ }
+ } while ((crp->crp_flags & CRYPTO_F_DONE) == 0);
+ dprintk("%s finished WAITING error=%d\n", __FUNCTION__, error);
if (crp->crp_etype != 0) {
error = crp->crp_etype;
struct crypt_kop kop;
struct crypt_find_op fop;
u_int64_t sid;
- u_int32_t ses;
+ u_int32_t ses = 0;
int feat, fd, error = 0, crid;
mm_segment_t fs;
break;
case CRYPTO_MD5_HMAC:
info.authsize = MD5_HASH_LEN;
+ info.authkey = 16;
break;
case CRYPTO_SHA1_HMAC:
info.authsize = SHA1_HASH_LEN;
+ info.authkey = 20;
break;
case CRYPTO_SHA2_256_HMAC:
info.authsize = SHA2_256_HASH_LEN;
+ info.authkey = 32;
break;
case CRYPTO_SHA2_384_HMAC:
info.authsize = SHA2_384_HASH_LEN;
+ info.authkey = 48;
break;
case CRYPTO_SHA2_512_HMAC:
info.authsize = SHA2_512_HASH_LEN;
+ info.authkey = 64;
break;
case CRYPTO_RIPEMD160_HMAC:
info.authsize = RIPEMD160_HASH_LEN;
+ info.authkey = 20;
break;
default:
dprintk("%s(%s) - bad mac\n", __FUNCTION__, CIOCGSESSSTR);
if (info.authsize) {
cria.cri_alg = sop.mac;
cria.cri_klen = sop.mackeylen * 8;
- if ((info.maxkey && sop.mackeylen > info.maxkey) ||
- sop.keylen < info.minkey) {
- dprintk("%s(%s) - mackeylen %d\n", __FUNCTION__, CIOCGSESSSTR,
- sop.mackeylen);
+ if (info.authkey && sop.mackeylen != info.authkey) {
+ dprintk("%s(%s) - mackeylen %d != %d\n", __FUNCTION__,
+ CIOCGSESSSTR, sop.mackeylen, info.authkey);
error = EINVAL;
goto bail;
}
module_exit(cryptodev_exit);
MODULE_LICENSE("BSD");
-MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
MODULE_DESCRIPTION("Cryptodev (user interface to OCF)");
/* $OpenBSD: cryptodev.h,v 1.31 2002/06/11 11:14:29 beck Exp $ */
/*-
- * Linux port done by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2006-2007 David McCullough
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
* Copyright (C) 2004-2005 Intel Corporation.
* The license and original author are listed below.
*
#define crd_key CRD_INI.cri_key
#define crd_alg CRD_INI.cri_alg
#define crd_klen CRD_INI.cri_klen
+#define crd_mlen CRD_INI.cri_mlen
struct cryptodesc *crd_next;
};
* original cryptosoft for BSD by Angelos D. Keromytis (angelos@cis.upenn.edu)
* but is mostly unrecognisable,
*
- * Written by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2004-2007 David McCullough
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2004-2010 David McCullough
* Copyright (C) 2004-2005 Intel Corporation.
*
* LICENSE TERMS
#include <linux/mm.h>
#include <linux/skbuff.h>
#include <linux/random.h>
-#include <asm/scatterlist.h>
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#include <linux/scatterlist.h>
+#endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)
+#include <crypto/hash.h>
+#endif
#include <cryptodev.h>
#include <uio.h>
#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
-/* Software session entry */
+#define SW_TYPE_CIPHER 0x01
+#define SW_TYPE_HMAC 0x02
+#define SW_TYPE_HASH 0x04
+#define SW_TYPE_COMP 0x08
+#define SW_TYPE_BLKCIPHER 0x10
+#define SW_TYPE_ALG_MASK 0x1f
+
+#define SW_TYPE_ASYNC 0x8000
+
+/* We change some of the above if we have an async interface */
+
+#define SW_TYPE_ALG_AMASK (SW_TYPE_ALG_MASK | SW_TYPE_ASYNC)
-#define SW_TYPE_CIPHER 0
-#define SW_TYPE_HMAC 1
-#define SW_TYPE_AUTH2 2
-#define SW_TYPE_HASH 3
-#define SW_TYPE_COMP 4
-#define SW_TYPE_BLKCIPHER 5
+#define SW_TYPE_ABLKCIPHER (SW_TYPE_BLKCIPHER | SW_TYPE_ASYNC)
+#define SW_TYPE_AHASH (SW_TYPE_HASH | SW_TYPE_ASYNC)
+#define SW_TYPE_AHMAC (SW_TYPE_HMAC | SW_TYPE_ASYNC)
+
+#define SCATTERLIST_MAX 16
struct swcr_data {
int sw_type;
struct swcr_data *sw_next;
};
+struct swcr_req {
+ struct swcr_data *sw_head;
+ struct swcr_data *sw;
+ struct cryptop *crp;
+ struct cryptodesc *crd;
+ struct scatterlist sg[SCATTERLIST_MAX];
+ unsigned char iv[EALG_MAX_BLOCK_LEN];
+ char result[HASH_MAX_LEN];
+ void *crypto_req;
+};
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+static kmem_cache_t *swcr_req_cache;
+#else
+static struct kmem_cache *swcr_req_cache;
+#endif
+
#ifndef CRYPTO_TFM_MODE_CBC
/*
* As of linux-2.6.21 this is no longer defined, and presumably no longer
struct crypto_tfm *tfm;
void *info;
};
- #define ecb(X) #X
- #define cbc(X) #X
+ #define ecb(X) #X , CRYPTO_TFM_MODE_ECB
+ #define cbc(X) #X , CRYPTO_TFM_MODE_CBC
#define crypto_has_blkcipher(X, Y, Z) crypto_alg_available(X, 0)
#define crypto_blkcipher_cast(X) X
#define crypto_blkcipher_tfm(X) X
crypto_cipher_encrypt_iv((W)->tfm, X, Y, Z, (u8 *)((W)->info))
#define crypto_blkcipher_decrypt_iv(W, X, Y, Z) \
crypto_cipher_decrypt_iv((W)->tfm, X, Y, Z, (u8 *)((W)->info))
+ #define crypto_blkcipher_set_flags(x, y) /* nop */
/* Hash/HMAC/Digest */
struct hash_desc
{
struct crypto_tfm *tfm;
};
- #define hmac(X) #X
+ #define hmac(X) #X , 0
#define crypto_has_hash(X, Y, Z) crypto_alg_available(X, 0)
#define crypto_hash_cast(X) X
#define crypto_hash_tfm(X) X
#define crypto_comp_tfm(X) X
#define crypto_comp_cast(X) X
#define crypto_alloc_comp(X, Y, Z) crypto_alloc_tfm(X, mode)
+ #define plain(X) #X , 0
#else
- #define ecb(X) "ecb(" #X ")"
- #define cbc(X) "cbc(" #X ")"
- #define hmac(X) "hmac(" #X ")"
+ #define ecb(X) "ecb(" #X ")" , 0
+ #define cbc(X) "cbc(" #X ")" , 0
+ #define hmac(X) "hmac(" #X ")" , 0
+ #define plain(X) #X , 0
#endif /* if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */
-struct crypto_details
-{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22)
+/* no ablkcipher in older kernels */
+#define crypto_alloc_ablkcipher(a,b,c) (NULL)
+#define crypto_ablkcipher_tfm(x) ((struct crypto_tfm *)(x))
+#define crypto_ablkcipher_set_flags(a, b) /* nop */
+#define crypto_ablkcipher_setkey(x, y, z) (-EINVAL)
+#define crypto_has_ablkcipher(a,b,c) (0)
+#else
+#define HAVE_ABLKCIPHER
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32)
+/* no ahash in older kernels */
+#define crypto_ahash_tfm(x) ((struct crypto_tfm *)(x))
+#define crypto_alloc_ahash(a,b,c) (NULL)
+#define crypto_ahash_digestsize(x) 0
+#else
+#define HAVE_AHASH
+#endif
+
+struct crypto_details {
char *alg_name;
int mode;
int sw_type;
};
-/*
- * This needs to be kept updated with CRYPTO_xxx list (cryptodev.h).
- * If the Algorithm is not supported, then insert a {NULL, 0, 0} entry.
- *
- * IMPORTANT: The index to the array IS CRYPTO_xxx.
- */
-static struct crypto_details crypto_details[CRYPTO_ALGORITHM_MAX + 1] = {
- { NULL, 0, 0 },
- /* CRYPTO_xxx index starts at 1 */
- { cbc(des), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER },
- { cbc(des3_ede), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER },
- { cbc(blowfish), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER },
- { cbc(cast5), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER },
- { cbc(skipjack), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER },
- { hmac(md5), 0, SW_TYPE_HMAC },
- { hmac(sha1), 0, SW_TYPE_HMAC },
- { hmac(ripemd160), 0, SW_TYPE_HMAC },
- { "md5-kpdk??", 0, SW_TYPE_HASH },
- { "sha1-kpdk??", 0, SW_TYPE_HASH },
- { cbc(aes), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER },
- { ecb(arc4), CRYPTO_TFM_MODE_ECB, SW_TYPE_BLKCIPHER },
- { "md5", 0, SW_TYPE_HASH },
- { "sha1", 0, SW_TYPE_HASH },
- { hmac(digest_null), 0, SW_TYPE_HMAC },
- { cbc(cipher_null), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER },
- { "deflate", 0, SW_TYPE_COMP },
- { hmac(sha256), 0, SW_TYPE_HMAC },
- { hmac(sha384), 0, SW_TYPE_HMAC },
- { hmac(sha512), 0, SW_TYPE_HMAC },
- { cbc(camellia), CRYPTO_TFM_MODE_CBC, SW_TYPE_BLKCIPHER },
- { "sha256", 0, SW_TYPE_HASH },
- { "sha384", 0, SW_TYPE_HASH },
- { "sha512", 0, SW_TYPE_HASH },
- { "ripemd160", 0, SW_TYPE_HASH },
+static struct crypto_details crypto_details[] = {
+ [CRYPTO_DES_CBC] = { cbc(des), SW_TYPE_BLKCIPHER, },
+ [CRYPTO_3DES_CBC] = { cbc(des3_ede), SW_TYPE_BLKCIPHER, },
+ [CRYPTO_BLF_CBC] = { cbc(blowfish), SW_TYPE_BLKCIPHER, },
+ [CRYPTO_CAST_CBC] = { cbc(cast5), SW_TYPE_BLKCIPHER, },
+ [CRYPTO_SKIPJACK_CBC] = { cbc(skipjack), SW_TYPE_BLKCIPHER, },
+ [CRYPTO_MD5_HMAC] = { hmac(md5), SW_TYPE_HMAC, },
+ [CRYPTO_SHA1_HMAC] = { hmac(sha1), SW_TYPE_HMAC, },
+ [CRYPTO_RIPEMD160_HMAC] = { hmac(ripemd160), SW_TYPE_HMAC, },
+ [CRYPTO_MD5_KPDK] = { plain(md5-kpdk), SW_TYPE_HASH, },
+ [CRYPTO_SHA1_KPDK] = { plain(sha1-kpdk), SW_TYPE_HASH, },
+ [CRYPTO_AES_CBC] = { cbc(aes), SW_TYPE_BLKCIPHER, },
+ [CRYPTO_ARC4] = { ecb(arc4), SW_TYPE_BLKCIPHER, },
+ [CRYPTO_MD5] = { plain(md5), SW_TYPE_HASH, },
+ [CRYPTO_SHA1] = { plain(sha1), SW_TYPE_HASH, },
+ [CRYPTO_NULL_HMAC] = { hmac(digest_null), SW_TYPE_HMAC, },
+ [CRYPTO_NULL_CBC] = { cbc(cipher_null), SW_TYPE_BLKCIPHER, },
+ [CRYPTO_DEFLATE_COMP] = { plain(deflate), SW_TYPE_COMP, },
+ [CRYPTO_SHA2_256_HMAC] = { hmac(sha256), SW_TYPE_HMAC, },
+ [CRYPTO_SHA2_384_HMAC] = { hmac(sha384), SW_TYPE_HMAC, },
+ [CRYPTO_SHA2_512_HMAC] = { hmac(sha512), SW_TYPE_HMAC, },
+ [CRYPTO_CAMELLIA_CBC] = { cbc(camellia), SW_TYPE_BLKCIPHER, },
+ [CRYPTO_SHA2_256] = { plain(sha256), SW_TYPE_HASH, },
+ [CRYPTO_SHA2_384] = { plain(sha384), SW_TYPE_HASH, },
+ [CRYPTO_SHA2_512] = { plain(sha512), SW_TYPE_HASH, },
+ [CRYPTO_RIPEMD160] = { plain(ripemd160), SW_TYPE_HASH, },
};
int32_t swcr_id = -1;
MODULE_PARM_DESC(swcr_fail_if_compression_grows,
"Treat compression that results in more data as a failure");
+int swcr_no_ahash = 0;
+module_param(swcr_no_ahash, int, 0644);
+MODULE_PARM_DESC(swcr_no_ahash,
+ "Do not use async hash/hmac even if available");
+
+int swcr_no_ablk = 0;
+module_param(swcr_no_ablk, int, 0644);
+MODULE_PARM_DESC(swcr_no_ablk,
+ "Do not use async blk ciphers even if available");
+
static struct swcr_data **swcr_sessions = NULL;
static u_int32_t swcr_sesnum = 0;
module_param(swcr_debug, int, 0644);
MODULE_PARM_DESC(swcr_debug, "Enable debug");
+static void swcr_process_req(struct swcr_req *req);
+
/*
* Generate a new software session.
*/
u_int32_t i;
int error;
char *algo;
- int mode, sw_type;
+ int mode;
dprintk("%s()\n", __FUNCTION__);
if (sid == NULL || cri == NULL) {
}
memset(*swd, 0, sizeof(struct swcr_data));
- if (cri->cri_alg > CRYPTO_ALGORITHM_MAX) {
+ if (cri->cri_alg < 0 ||
+ cri->cri_alg>=sizeof(crypto_details)/sizeof(crypto_details[0])){
printk("cryptosoft: Unknown algorithm 0x%x\n", cri->cri_alg);
swcr_freesession(NULL, i);
return EINVAL;
}
mode = crypto_details[cri->cri_alg].mode;
- sw_type = crypto_details[cri->cri_alg].sw_type;
+ (*swd)->sw_type = crypto_details[cri->cri_alg].sw_type;
+ (*swd)->sw_alg = cri->cri_alg;
/* Algorithm specific configuration */
switch (cri->cri_alg) {
break;
}
- if (sw_type == SW_TYPE_BLKCIPHER) {
- dprintk("%s crypto_alloc_blkcipher(%s, 0x%x)\n", __FUNCTION__,
+ if ((*swd)->sw_type & SW_TYPE_BLKCIPHER) {
+ dprintk("%s crypto_alloc_*blkcipher(%s, 0x%x)\n", __FUNCTION__,
algo, mode);
- (*swd)->sw_tfm = crypto_blkcipher_tfm(
- crypto_alloc_blkcipher(algo, 0,
- CRYPTO_ALG_ASYNC));
+ /* try async first */
+ (*swd)->sw_tfm = swcr_no_ablk ? NULL :
+ crypto_ablkcipher_tfm(crypto_alloc_ablkcipher(algo, 0, 0));
+ if ((*swd)->sw_tfm) {
+ dprintk("%s %s cipher is async\n", __FUNCTION__, algo);
+ (*swd)->sw_type |= SW_TYPE_ASYNC;
+ } else {
+ dprintk("%s %s cipher is sync\n", __FUNCTION__, algo);
+ (*swd)->sw_tfm = crypto_blkcipher_tfm(
+ crypto_alloc_blkcipher(algo, 0, CRYPTO_ALG_ASYNC));
+ }
if (!(*swd)->sw_tfm) {
- dprintk("cryptosoft: crypto_alloc_blkcipher failed(%s,0x%x)\n",
+ dprintk("cryptosoft: crypto_alloc_blkcipher failed(%s, 0x%x)\n",
algo,mode);
swcr_freesession(NULL, i);
return EINVAL;
if (debug) {
dprintk("%s key:cri->cri_klen=%d,(cri->cri_klen + 7)/8=%d",
- __FUNCTION__,cri->cri_klen,(cri->cri_klen + 7)/8);
+ __FUNCTION__, cri->cri_klen, (cri->cri_klen + 7) / 8);
for (i = 0; i < (cri->cri_klen + 7) / 8; i++)
- {
- dprintk("%s0x%x", (i % 8) ? " " : "\n ",cri->cri_key[i]);
- }
+ dprintk("%s0x%x", (i % 8) ? " " : "\n ",
+ cri->cri_key[i] & 0xff);
dprintk("\n");
}
- error = crypto_blkcipher_setkey(
- crypto_blkcipher_cast((*swd)->sw_tfm), cri->cri_key,
- (cri->cri_klen + 7) / 8);
+ if ((*swd)->sw_type & SW_TYPE_ASYNC) {
+ /* OCF doesn't enforce keys */
+ crypto_ablkcipher_set_flags(
+ __crypto_ablkcipher_cast((*swd)->sw_tfm),
+ CRYPTO_TFM_REQ_WEAK_KEY);
+ error = crypto_ablkcipher_setkey(
+ __crypto_ablkcipher_cast((*swd)->sw_tfm),
+ cri->cri_key, (cri->cri_klen + 7) / 8);
+ } else {
+ /* OCF doesn't enforce keys */
+ crypto_blkcipher_set_flags(
+ crypto_blkcipher_cast((*swd)->sw_tfm),
+ CRYPTO_TFM_REQ_WEAK_KEY);
+ error = crypto_blkcipher_setkey(
+ crypto_blkcipher_cast((*swd)->sw_tfm),
+ cri->cri_key, (cri->cri_klen + 7) / 8);
+ }
if (error) {
printk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n", error,
(*swd)->sw_tfm->crt_flags);
swcr_freesession(NULL, i);
return error;
}
- } else if (sw_type == SW_TYPE_HMAC || sw_type == SW_TYPE_HASH) {
- dprintk("%s crypto_alloc_hash(%s, 0x%x)\n", __FUNCTION__,
+ } else if ((*swd)->sw_type & (SW_TYPE_HMAC | SW_TYPE_HASH)) {
+ dprintk("%s crypto_alloc_*hash(%s, 0x%x)\n", __FUNCTION__,
algo, mode);
- (*swd)->sw_tfm = crypto_hash_tfm(
- crypto_alloc_hash(algo, 0, CRYPTO_ALG_ASYNC));
+ /* try async first */
+ (*swd)->sw_tfm = swcr_no_ahash ? NULL :
+ crypto_ahash_tfm(crypto_alloc_ahash(algo, 0, 0));
+ if ((*swd)->sw_tfm) {
+ dprintk("%s %s hash is async\n", __FUNCTION__, algo);
+ (*swd)->sw_type |= SW_TYPE_ASYNC;
+ } else {
+ dprintk("%s %s hash is sync\n", __FUNCTION__, algo);
+ (*swd)->sw_tfm = crypto_hash_tfm(
+ crypto_alloc_hash(algo, 0, CRYPTO_ALG_ASYNC));
+ }
if (!(*swd)->sw_tfm) {
dprintk("cryptosoft: crypto_alloc_hash failed(%s,0x%x)\n",
(*swd)->u.hmac.sw_klen = (cri->cri_klen + 7) / 8;
(*swd)->u.hmac.sw_key = (char *)kmalloc((*swd)->u.hmac.sw_klen,
- SLAB_ATOMIC);
+ SLAB_ATOMIC);
if ((*swd)->u.hmac.sw_key == NULL) {
swcr_freesession(NULL, i);
dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
memcpy((*swd)->u.hmac.sw_key, cri->cri_key, (*swd)->u.hmac.sw_klen);
if (cri->cri_mlen) {
(*swd)->u.hmac.sw_mlen = cri->cri_mlen;
- } else {
- (*swd)->u.hmac.sw_mlen =
- crypto_hash_digestsize(
- crypto_hash_cast((*swd)->sw_tfm));
+ } else if ((*swd)->sw_type & SW_TYPE_ASYNC) {
+ (*swd)->u.hmac.sw_mlen = crypto_ahash_digestsize(
+ __crypto_ahash_cast((*swd)->sw_tfm));
+ } else {
+ (*swd)->u.hmac.sw_mlen = crypto_hash_digestsize(
+ crypto_hash_cast((*swd)->sw_tfm));
}
- } else if (sw_type == SW_TYPE_COMP) {
+ } else if ((*swd)->sw_type & SW_TYPE_COMP) {
(*swd)->sw_tfm = crypto_comp_tfm(
crypto_alloc_comp(algo, 0, CRYPTO_ALG_ASYNC));
if (!(*swd)->sw_tfm) {
return ENOBUFS;
}
} else {
- printk("cryptosoft: Unhandled sw_type %d\n", sw_type);
+ printk("cryptosoft: Unhandled sw_type %d\n", (*swd)->sw_type);
swcr_freesession(NULL, i);
return EINVAL;
}
- (*swd)->sw_alg = cri->cri_alg;
- (*swd)->sw_type = sw_type;
-
cri = cri->cri_next;
swd = &((*swd)->sw_next);
}
while ((swd = swcr_sessions[sid]) != NULL) {
swcr_sessions[sid] = swd->sw_next;
- if (swd->sw_tfm)
- crypto_free_tfm(swd->sw_tfm);
- if (swd->sw_type == SW_TYPE_COMP) {
+ if (swd->sw_tfm) {
+ switch (swd->sw_type & SW_TYPE_ALG_AMASK) {
+#ifdef HAVE_AHASH
+ case SW_TYPE_AHMAC:
+ case SW_TYPE_AHASH:
+ crypto_free_ahash(__crypto_ahash_cast(swd->sw_tfm));
+ break;
+#endif
+#ifdef HAVE_ABLKCIPHER
+ case SW_TYPE_ABLKCIPHER:
+ crypto_free_ablkcipher(__crypto_ablkcipher_cast(swd->sw_tfm));
+ break;
+#endif
+ case SW_TYPE_BLKCIPHER:
+ crypto_free_blkcipher(crypto_blkcipher_cast(swd->sw_tfm));
+ break;
+ case SW_TYPE_HMAC:
+ case SW_TYPE_HASH:
+ crypto_free_hash(crypto_hash_cast(swd->sw_tfm));
+ break;
+ case SW_TYPE_COMP:
+ crypto_free_comp(crypto_comp_cast(swd->sw_tfm));
+ default:
+ crypto_free_tfm(swd->sw_tfm);
+ break;
+ }
+ swd->sw_tfm = NULL;
+ }
+ if (swd->sw_type & SW_TYPE_COMP) {
if (swd->u.sw_comp_buf)
kfree(swd->u.sw_comp_buf);
} else {
return 0;
}
-/*
- * Process a software request.
- */
-static int
-swcr_process(device_t dev, struct cryptop *crp, int hint)
+#if defined(HAVE_ABLKCIPHER) || defined(HAVE_AHASH)
+/* older kernels had no async interface */
+
+static void swcr_process_callback(struct crypto_async_request *creq, int err)
+{
+ struct swcr_req *req = creq->data;
+
+ dprintk("%s()\n", __FUNCTION__);
+ if (err) {
+ if (err == -EINPROGRESS)
+ return;
+ dprintk("%s() fail %d\n", __FUNCTION__, -err);
+ req->crp->crp_etype = -err;
+ goto done;
+ }
+
+ switch (req->sw->sw_type & SW_TYPE_ALG_AMASK) {
+ case SW_TYPE_AHMAC:
+ case SW_TYPE_AHASH:
+ crypto_copyback(req->crp->crp_flags, req->crp->crp_buf,
+ req->crd->crd_inject, req->sw->u.hmac.sw_mlen, req->result);
+ ahash_request_free(req->crypto_req);
+ break;
+ case SW_TYPE_ABLKCIPHER:
+ ablkcipher_request_free(req->crypto_req);
+ break;
+ default:
+ req->crp->crp_etype = EINVAL;
+ goto done;
+ }
+
+ req->crd = req->crd->crd_next;
+ if (req->crd) {
+ swcr_process_req(req);
+ return;
+ }
+
+done:
+ dprintk("%s crypto_done %p\n", __FUNCTION__, req);
+ crypto_done(req->crp);
+ kmem_cache_free(swcr_req_cache, req);
+}
+#endif /* defined(HAVE_ABLKCIPHER) || defined(HAVE_AHASH) */
+
+
+static void swcr_process_req(struct swcr_req *req)
{
- struct cryptodesc *crd;
struct swcr_data *sw;
- u_int32_t lid;
-#define SCATTERLIST_MAX 16
- struct scatterlist sg[SCATTERLIST_MAX];
+ struct cryptop *crp = req->crp;
+ struct cryptodesc *crd = req->crd;
+ struct sk_buff *skb = (struct sk_buff *) crp->crp_buf;
+ struct uio *uiop = (struct uio *) crp->crp_buf;
int sg_num, sg_len, skip;
- struct sk_buff *skb = NULL;
- struct uio *uiop = NULL;
dprintk("%s()\n", __FUNCTION__);
- /* Sanity check */
- if (crp == NULL) {
- dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
- return EINVAL;
- }
- crp->crp_etype = 0;
+ /*
+ * Find the crypto context.
+ *
+ * XXX Note that the logic here prevents us from having
+ * XXX the same algorithm multiple times in a session
+ * XXX (or rather, we can but it won't give us the right
+ * XXX results). To do that, we'd need some way of differentiating
+ * XXX between the various instances of an algorithm (so we can
+ * XXX locate the correct crypto context).
+ */
+ for (sw = req->sw_head; sw && sw->sw_alg != crd->crd_alg; sw = sw->sw_next)
+ ;
- if (crp->crp_desc == NULL || crp->crp_buf == NULL) {
- dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ /* No such context ? */
+ if (sw == NULL) {
crp->crp_etype = EINVAL;
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
goto done;
}
- lid = crp->crp_sid & 0xffffffff;
- if (lid >= swcr_sesnum || lid == 0 || swcr_sessions == NULL ||
- swcr_sessions[lid] == NULL) {
- crp->crp_etype = ENOENT;
- dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__);
- goto done;
- }
+ req->sw = sw;
+ skip = crd->crd_skip;
/*
- * do some error checking outside of the loop for SKB and IOV processing
- * this leaves us with valid skb or uiop pointers for later
+ * setup the SG list skip from the start of the buffer
*/
+ memset(req->sg, 0, sizeof(req->sg));
+ sg_init_table(req->sg, SCATTERLIST_MAX);
if (crp->crp_flags & CRYPTO_F_SKBUF) {
- skb = (struct sk_buff *) crp->crp_buf;
- if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) {
- printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", __FILE__, __LINE__,
- skb_shinfo(skb)->nr_frags);
- goto done;
+ int i, len;
+
+ sg_num = 0;
+ sg_len = 0;
+
+ if (skip < skb_headlen(skb)) {
+ len = skb_headlen(skb) - skip;
+ if (len + sg_len > crd->crd_len)
+ len = crd->crd_len - sg_len;
+ sg_set_page(&req->sg[sg_num],
+ virt_to_page(skb->data + skip), len,
+ offset_in_page(skb->data + skip));
+ sg_len += len;
+ sg_num++;
+ skip = 0;
+ } else
+ skip -= skb_headlen(skb);
+
+ for (i = 0; sg_len < crd->crd_len &&
+ i < skb_shinfo(skb)->nr_frags &&
+ sg_num < SCATTERLIST_MAX; i++) {
+ if (skip < skb_shinfo(skb)->frags[i].size) {
+ len = skb_shinfo(skb)->frags[i].size - skip;
+ if (len + sg_len > crd->crd_len)
+ len = crd->crd_len - sg_len;
+ sg_set_page(&req->sg[sg_num],
+ skb_shinfo(skb)->frags[i].page,
+ len,
+ skb_shinfo(skb)->frags[i].page_offset + skip);
+ sg_len += len;
+ sg_num++;
+ skip = 0;
+ } else
+ skip -= skb_shinfo(skb)->frags[i].size;
}
} else if (crp->crp_flags & CRYPTO_F_IOV) {
- uiop = (struct uio *) crp->crp_buf;
- if (uiop->uio_iovcnt > SCATTERLIST_MAX) {
- printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", __FILE__, __LINE__,
- uiop->uio_iovcnt);
- goto done;
+ int len;
+
+ sg_len = 0;
+ for (sg_num = 0; sg_len < crd->crd_len &&
+ sg_num < uiop->uio_iovcnt &&
+ sg_num < SCATTERLIST_MAX; sg_num++) {
+ if (skip <= uiop->uio_iov[sg_num].iov_len) {
+ len = uiop->uio_iov[sg_num].iov_len - skip;
+ if (len + sg_len > crd->crd_len)
+ len = crd->crd_len - sg_len;
+ sg_set_page(&req->sg[sg_num],
+ virt_to_page(uiop->uio_iov[sg_num].iov_base+skip),
+ len,
+ offset_in_page(uiop->uio_iov[sg_num].iov_base+skip));
+ sg_len += len;
+ skip = 0;
+ } else
+ skip -= uiop->uio_iov[sg_num].iov_len;
}
+ } else {
+ sg_len = (crp->crp_ilen - skip);
+ if (sg_len > crd->crd_len)
+ sg_len = crd->crd_len;
+ sg_set_page(&req->sg[0], virt_to_page(crp->crp_buf + skip),
+ sg_len, offset_in_page(crp->crp_buf + skip));
+ sg_num = 1;
}
- /* Go through crypto descriptors, processing as we go */
- for (crd = crp->crp_desc; crd; crd = crd->crd_next) {
- /*
- * Find the crypto context.
- *
- * XXX Note that the logic here prevents us from having
- * XXX the same algorithm multiple times in a session
- * XXX (or rather, we can but it won't give us the right
- * XXX results). To do that, we'd need some way of differentiating
- * XXX between the various instances of an algorithm (so we can
- * XXX locate the correct crypto context).
- */
- for (sw = swcr_sessions[lid]; sw && sw->sw_alg != crd->crd_alg;
- sw = sw->sw_next)
- ;
+ switch (sw->sw_type & SW_TYPE_ALG_AMASK) {
+
+#ifdef HAVE_AHASH
+ case SW_TYPE_AHMAC:
+ case SW_TYPE_AHASH:
+ {
+ int ret;
- /* No such context ? */
- if (sw == NULL) {
+ /* check we have room for the result */
+ if (crp->crp_ilen - crd->crd_inject < sw->u.hmac.sw_mlen) {
+ dprintk("cryptosoft: EINVAL crp_ilen=%d, len=%d, inject=%d "
+ "digestsize=%d\n", crp->crp_ilen, crd->crd_skip + sg_len,
+ crd->crd_inject, sw->u.hmac.sw_mlen);
+ crp->crp_etype = EINVAL;
+ goto done;
+ }
+
+ req->crypto_req =
+ ahash_request_alloc(__crypto_ahash_cast(sw->sw_tfm),GFP_KERNEL);
+ if (!req->crypto_req) {
+ crp->crp_etype = ENOMEM;
+ dprintk("%s,%d: ENOMEM ahash_request_alloc", __FILE__, __LINE__);
+ goto done;
+ }
+
+ ahash_request_set_callback(req->crypto_req,
+ CRYPTO_TFM_REQ_MAY_BACKLOG, swcr_process_callback, req);
+
+ memset(req->result, 0, sizeof(req->result));
+
+ if (sw->sw_type & SW_TYPE_AHMAC)
+ crypto_ahash_setkey(__crypto_ahash_cast(sw->sw_tfm),
+ sw->u.hmac.sw_key, sw->u.hmac.sw_klen);
+ ahash_request_set_crypt(req->crypto_req, req->sg, req->result, sg_len);
+ ret = crypto_ahash_digest(req->crypto_req);
+ switch (ret) {
+ case -EINPROGRESS:
+ case -EBUSY:
+ return;
+ default:
+ case 0:
+ dprintk("hash OP %s %d\n", ret ? "failed" : "success", ret);
+ crp->crp_etype = ret;
+ ahash_request_free(req->crypto_req);
+ goto done;
+ }
+ } break;
+#endif /* HAVE_AHASH */
+
+#ifdef HAVE_ABLKCIPHER
+ case SW_TYPE_ABLKCIPHER: {
+ int ret;
+ unsigned char *ivp = req->iv;
+ int ivsize =
+ crypto_ablkcipher_ivsize(__crypto_ablkcipher_cast(sw->sw_tfm));
+
+ if (sg_len < crypto_ablkcipher_blocksize(
+ __crypto_ablkcipher_cast(sw->sw_tfm))) {
+ crp->crp_etype = EINVAL;
+ dprintk("%s,%d: EINVAL len %d < %d\n", __FILE__, __LINE__,
+ sg_len, crypto_ablkcipher_blocksize(
+ __crypto_ablkcipher_cast(sw->sw_tfm)));
+ goto done;
+ }
+
+ if (ivsize > sizeof(req->iv)) {
crp->crp_etype = EINVAL;
dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
goto done;
}
- skip = crd->crd_skip;
+ req->crypto_req = ablkcipher_request_alloc(
+ __crypto_ablkcipher_cast(sw->sw_tfm), GFP_KERNEL);
+ if (!req->crypto_req) {
+ crp->crp_etype = ENOMEM;
+ dprintk("%s,%d: ENOMEM ablkcipher_request_alloc",
+ __FILE__, __LINE__);
+ goto done;
+ }
- /*
- * setup the SG list skip from the start of the buffer
- */
- memset(sg, 0, sizeof(sg));
- if (crp->crp_flags & CRYPTO_F_SKBUF) {
- int i, len;
+ ablkcipher_request_set_callback(req->crypto_req,
+ CRYPTO_TFM_REQ_MAY_BACKLOG, swcr_process_callback, req);
- sg_num = 0;
- sg_len = 0;
+ if (crd->crd_flags & CRD_F_KEY_EXPLICIT) {
+ int i, error;
- if (skip < skb_headlen(skb)) {
- len = skb_headlen(skb) - skip;
- if (len + sg_len > crd->crd_len)
- len = crd->crd_len - sg_len;
- sg_set_page(&sg[sg_num],
- virt_to_page(skb->data + skip), len,
- offset_in_page(skb->data + skip));
- sg_len += len;
- sg_num++;
- skip = 0;
- } else
- skip -= skb_headlen(skb);
-
- for (i = 0; sg_len < crd->crd_len &&
- i < skb_shinfo(skb)->nr_frags &&
- sg_num < SCATTERLIST_MAX; i++) {
- if (skip < skb_shinfo(skb)->frags[i].size) {
- len = skb_shinfo(skb)->frags[i].size - skip;
- if (len + sg_len > crd->crd_len)
- len = crd->crd_len - sg_len;
- sg_set_page(&sg[sg_num],
- skb_shinfo(skb)->frags[i].page,
- len,
- skb_shinfo(skb)->frags[i].page_offset + skip);
- sg_len += len;
- sg_num++;
- skip = 0;
- } else
- skip -= skb_shinfo(skb)->frags[i].size;
- }
- } else if (crp->crp_flags & CRYPTO_F_IOV) {
- int len;
-
- sg_len = 0;
- for (sg_num = 0; sg_len <= crd->crd_len &&
- sg_num < uiop->uio_iovcnt &&
- sg_num < SCATTERLIST_MAX; sg_num++) {
- if (skip <= uiop->uio_iov[sg_num].iov_len) {
- len = uiop->uio_iov[sg_num].iov_len - skip;
- if (len + sg_len > crd->crd_len)
- len = crd->crd_len - sg_len;
- sg_set_page(&sg[sg_num],
- virt_to_page(uiop->uio_iov[sg_num].iov_base+skip),
- len,
- offset_in_page(uiop->uio_iov[sg_num].iov_base+skip));
- sg_len += len;
- skip = 0;
- } else
- skip -= uiop->uio_iov[sg_num].iov_len;
+ if (debug) {
+ dprintk("%s key:", __FUNCTION__);
+ for (i = 0; i < (crd->crd_klen + 7) / 8; i++)
+ dprintk("%s0x%x", (i % 8) ? " " : "\n ",
+ crd->crd_key[i] & 0xff);
+ dprintk("\n");
}
- } else {
- sg_len = (crp->crp_ilen - skip);
- if (sg_len > crd->crd_len)
- sg_len = crd->crd_len;
- sg_set_page(&sg[0], virt_to_page(crp->crp_buf + skip),
- sg_len, offset_in_page(crp->crp_buf + skip));
- sg_num = 1;
- }
-
-
- switch (sw->sw_type) {
- case SW_TYPE_BLKCIPHER: {
- unsigned char iv[EALG_MAX_BLOCK_LEN];
- unsigned char *ivp = iv;
- int ivsize =
- crypto_blkcipher_ivsize(crypto_blkcipher_cast(sw->sw_tfm));
- struct blkcipher_desc desc;
-
- if (sg_len < crypto_blkcipher_blocksize(
- crypto_blkcipher_cast(sw->sw_tfm))) {
- crp->crp_etype = EINVAL;
- dprintk("%s,%d: EINVAL len %d < %d\n", __FILE__, __LINE__,
- sg_len, crypto_blkcipher_blocksize(
- crypto_blkcipher_cast(sw->sw_tfm)));
- goto done;
+ /* OCF doesn't enforce keys */
+ crypto_ablkcipher_set_flags(__crypto_ablkcipher_cast(sw->sw_tfm),
+ CRYPTO_TFM_REQ_WEAK_KEY);
+ error = crypto_ablkcipher_setkey(
+ __crypto_ablkcipher_cast(sw->sw_tfm), crd->crd_key,
+ (crd->crd_klen + 7) / 8);
+ if (error) {
+ dprintk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n",
+ error, sw->sw_tfm->crt_flags);
+ crp->crp_etype = -error;
}
+ }
+
+ if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
- if (ivsize > sizeof(iv)) {
- crp->crp_etype = EINVAL;
- dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
- goto done;
+ if (crd->crd_flags & CRD_F_IV_EXPLICIT)
+ ivp = crd->crd_iv;
+ else
+ get_random_bytes(ivp, ivsize);
+ /*
+ * do we have to copy the IV back to the buffer ?
+ */
+ if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+ crypto_copyback(crp->crp_flags, crp->crp_buf,
+ crd->crd_inject, ivsize, (caddr_t)ivp);
}
+ ablkcipher_request_set_crypt(req->crypto_req, req->sg, req->sg,
+ sg_len, ivp);
+ ret = crypto_ablkcipher_encrypt(req->crypto_req);
- if (crd->crd_flags & CRD_F_KEY_EXPLICIT) {
- int i, error;
+ } else { /*decrypt */
- if (debug) {
- dprintk("%s key:", __FUNCTION__);
- for (i = 0; i < (crd->crd_klen + 7) / 8; i++)
- dprintk("%s0x%x", (i % 8) ? " " : "\n ",
- crd->crd_key[i]);
- dprintk("\n");
- }
- error = crypto_blkcipher_setkey(
- crypto_blkcipher_cast(sw->sw_tfm), crd->crd_key,
- (crd->crd_klen + 7) / 8);
- if (error) {
- dprintk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n",
- error, sw->sw_tfm->crt_flags);
- crp->crp_etype = -error;
- }
+ if (crd->crd_flags & CRD_F_IV_EXPLICIT)
+ ivp = crd->crd_iv;
+ else
+ crypto_copydata(crp->crp_flags, crp->crp_buf,
+ crd->crd_inject, ivsize, (caddr_t)ivp);
+ ablkcipher_request_set_crypt(req->crypto_req, req->sg, req->sg,
+ sg_len, ivp);
+ ret = crypto_ablkcipher_decrypt(req->crypto_req);
+ }
+
+ switch (ret) {
+ case -EINPROGRESS:
+ case -EBUSY:
+ return;
+ default:
+ case 0:
+ dprintk("crypto OP %s %d\n", ret ? "failed" : "success", ret);
+ crp->crp_etype = ret;
+ goto done;
+ }
+ } break;
+#endif /* HAVE_ABLKCIPHER */
+
+ case SW_TYPE_BLKCIPHER: {
+ unsigned char iv[EALG_MAX_BLOCK_LEN];
+ unsigned char *ivp = iv;
+ struct blkcipher_desc desc;
+ int ivsize = crypto_blkcipher_ivsize(crypto_blkcipher_cast(sw->sw_tfm));
+
+ if (sg_len < crypto_blkcipher_blocksize(
+ crypto_blkcipher_cast(sw->sw_tfm))) {
+ crp->crp_etype = EINVAL;
+ dprintk("%s,%d: EINVAL len %d < %d\n", __FILE__, __LINE__,
+ sg_len, crypto_blkcipher_blocksize(
+ crypto_blkcipher_cast(sw->sw_tfm)));
+ goto done;
+ }
+
+ if (ivsize > sizeof(iv)) {
+ crp->crp_etype = EINVAL;
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ goto done;
+ }
+
+ if (crd->crd_flags & CRD_F_KEY_EXPLICIT) {
+ int i, error;
+
+ if (debug) {
+ dprintk("%s key:", __FUNCTION__);
+ for (i = 0; i < (crd->crd_klen + 7) / 8; i++)
+ dprintk("%s0x%x", (i % 8) ? " " : "\n ",
+ crd->crd_key[i] & 0xff);
+ dprintk("\n");
+ }
+ /* OCF doesn't enforce keys */
+ crypto_blkcipher_set_flags(crypto_blkcipher_cast(sw->sw_tfm),
+ CRYPTO_TFM_REQ_WEAK_KEY);
+ error = crypto_blkcipher_setkey(
+ crypto_blkcipher_cast(sw->sw_tfm), crd->crd_key,
+ (crd->crd_klen + 7) / 8);
+ if (error) {
+ dprintk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n",
+ error, sw->sw_tfm->crt_flags);
+ crp->crp_etype = -error;
}
+ }
+
+ memset(&desc, 0, sizeof(desc));
+ desc.tfm = crypto_blkcipher_cast(sw->sw_tfm);
+
+ if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
- memset(&desc, 0, sizeof(desc));
- desc.tfm = crypto_blkcipher_cast(sw->sw_tfm);
-
- if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
-
- if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
- ivp = crd->crd_iv;
- } else {
- get_random_bytes(ivp, ivsize);
- }
- /*
- * do we have to copy the IV back to the buffer ?
- */
- if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
- crypto_copyback(crp->crp_flags, crp->crp_buf,
- crd->crd_inject, ivsize, (caddr_t)ivp);
- }
- desc.info = ivp;
- crypto_blkcipher_encrypt_iv(&desc, sg, sg, sg_len);
-
- } else { /*decrypt */
-
- if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
- ivp = crd->crd_iv;
- } else {
- crypto_copydata(crp->crp_flags, crp->crp_buf,
- crd->crd_inject, ivsize, (caddr_t)ivp);
- }
- desc.info = ivp;
- crypto_blkcipher_decrypt_iv(&desc, sg, sg, sg_len);
+ if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
+ ivp = crd->crd_iv;
+ } else {
+ get_random_bytes(ivp, ivsize);
}
- } break;
- case SW_TYPE_HMAC:
- case SW_TYPE_HASH:
- {
- char result[HASH_MAX_LEN];
- struct hash_desc desc;
-
- /* check we have room for the result */
- if (crp->crp_ilen - crd->crd_inject < sw->u.hmac.sw_mlen) {
- dprintk(
- "cryptosoft: EINVAL crp_ilen=%d, len=%d, inject=%d digestsize=%d\n",
- crp->crp_ilen, crd->crd_skip + sg_len, crd->crd_inject,
- sw->u.hmac.sw_mlen);
- crp->crp_etype = EINVAL;
- goto done;
+ /*
+ * do we have to copy the IV back to the buffer ?
+ */
+ if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+ crypto_copyback(crp->crp_flags, crp->crp_buf,
+ crd->crd_inject, ivsize, (caddr_t)ivp);
+ }
+ desc.info = ivp;
+ crypto_blkcipher_encrypt_iv(&desc, req->sg, req->sg, sg_len);
+
+ } else { /*decrypt */
+
+ if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
+ ivp = crd->crd_iv;
+ } else {
+ crypto_copydata(crp->crp_flags, crp->crp_buf,
+ crd->crd_inject, ivsize, (caddr_t)ivp);
}
+ desc.info = ivp;
+ crypto_blkcipher_decrypt_iv(&desc, req->sg, req->sg, sg_len);
+ }
+ } break;
- memset(&desc, 0, sizeof(desc));
- desc.tfm = crypto_hash_cast(sw->sw_tfm);
+ case SW_TYPE_HMAC:
+ case SW_TYPE_HASH:
+ {
+ char result[HASH_MAX_LEN];
+ struct hash_desc desc;
+
+ /* check we have room for the result */
+ if (crp->crp_ilen - crd->crd_inject < sw->u.hmac.sw_mlen) {
+ dprintk("cryptosoft: EINVAL crp_ilen=%d, len=%d, inject=%d "
+ "digestsize=%d\n", crp->crp_ilen, crd->crd_skip + sg_len,
+ crd->crd_inject, sw->u.hmac.sw_mlen);
+ crp->crp_etype = EINVAL;
+ goto done;
+ }
- memset(result, 0, sizeof(result));
+ memset(&desc, 0, sizeof(desc));
+ desc.tfm = crypto_hash_cast(sw->sw_tfm);
- if (sw->sw_type == SW_TYPE_HMAC) {
+ memset(result, 0, sizeof(result));
+
+ if (sw->sw_type & SW_TYPE_HMAC) {
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
- crypto_hmac(sw->sw_tfm, sw->u.hmac.sw_key, &sw->u.hmac.sw_klen,
- sg, sg_num, result);
+ crypto_hmac(sw->sw_tfm, sw->u.hmac.sw_key, &sw->u.hmac.sw_klen,
+ req->sg, sg_num, result);
#else
- crypto_hash_setkey(desc.tfm, sw->u.hmac.sw_key,
- sw->u.hmac.sw_klen);
- crypto_hash_digest(&desc, sg, sg_len, result);
-#endif /* #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */
-
- } else { /* SW_TYPE_HASH */
- crypto_hash_digest(&desc, sg, sg_len, result);
+ crypto_hash_setkey(desc.tfm, sw->u.hmac.sw_key,
+ sw->u.hmac.sw_klen);
+ crypto_hash_digest(&desc, req->sg, sg_len, result);
+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */
+
+ } else { /* SW_TYPE_HASH */
+ crypto_hash_digest(&desc, req->sg, sg_len, result);
+ }
+
+ crypto_copyback(crp->crp_flags, crp->crp_buf,
+ crd->crd_inject, sw->u.hmac.sw_mlen, result);
+ }
+ break;
+
+ case SW_TYPE_COMP: {
+ void *ibuf = NULL;
+ void *obuf = sw->u.sw_comp_buf;
+ int ilen = sg_len, olen = CRYPTO_MAX_DATA_LEN;
+ int ret = 0;
+
+ /*
+ * we need to use an additional copy if there is more than one
+ * input chunk since the kernel comp routines do not handle
+ * SG yet. Otherwise we just use the input buffer as is.
+ * Rather than allocate another buffer we just split the tmp
+ * buffer we already have.
+ * Perhaps we should just use zlib directly ?
+ */
+ if (sg_num > 1) {
+ int blk;
+
+ ibuf = obuf;
+ for (blk = 0; blk < sg_num; blk++) {
+ memcpy(obuf, sg_virt(&req->sg[blk]),
+ req->sg[blk].length);
+ obuf += req->sg[blk].length;
+ }
+ olen -= sg_len;
+ } else
+ ibuf = sg_virt(&req->sg[0]);
+
+ if (crd->crd_flags & CRD_F_ENCRYPT) { /* compress */
+ ret = crypto_comp_compress(crypto_comp_cast(sw->sw_tfm),
+ ibuf, ilen, obuf, &olen);
+ if (!ret && olen > crd->crd_len) {
+ dprintk("cryptosoft: ERANGE compress %d into %d\n",
+ crd->crd_len, olen);
+ if (swcr_fail_if_compression_grows)
+ ret = ERANGE;
}
+ } else { /* decompress */
+ ret = crypto_comp_decompress(crypto_comp_cast(sw->sw_tfm),
+ ibuf, ilen, obuf, &olen);
+ if (!ret && (olen + crd->crd_inject) > crp->crp_olen) {
+ dprintk("cryptosoft: ETOOSMALL decompress %d into %d, "
+ "space for %d,at offset %d\n",
+ crd->crd_len, olen, crp->crp_olen, crd->crd_inject);
+ ret = ETOOSMALL;
+ }
+ }
+ if (ret)
+ dprintk("%s,%d: ret = %d\n", __FILE__, __LINE__, ret);
+ /*
+ * on success copy result back,
+ * linux crpyto API returns -errno, we need to fix that
+ */
+ crp->crp_etype = ret < 0 ? -ret : ret;
+ if (ret == 0) {
+ /* copy back the result and return it's size */
crypto_copyback(crp->crp_flags, crp->crp_buf,
- crd->crd_inject, sw->u.hmac.sw_mlen, result);
- }
- break;
+ crd->crd_inject, olen, obuf);
+ crp->crp_olen = olen;
+ }
- case SW_TYPE_COMP: {
- void *ibuf = NULL;
- void *obuf = sw->u.sw_comp_buf;
- int ilen = sg_len, olen = CRYPTO_MAX_DATA_LEN;
- int ret = 0;
- /*
- * we need to use an additional copy if there is more than one
- * input chunk since the kernel comp routines do not handle
- * SG yet. Otherwise we just use the input buffer as is.
- * Rather than allocate another buffer we just split the tmp
- * buffer we already have.
- * Perhaps we should just use zlib directly ?
- */
- if (sg_num > 1) {
- int blk;
-
- ibuf = obuf;
- for (blk = 0; blk < sg_num; blk++) {
- memcpy(obuf, sg_virt(&sg[blk]),
- sg[blk].length);
- obuf += sg[blk].length;
- }
- olen -= sg_len;
- } else
- ibuf = sg_virt(&sg[0]);
-
- if (crd->crd_flags & CRD_F_ENCRYPT) { /* compress */
- ret = crypto_comp_compress(crypto_comp_cast(sw->sw_tfm),
- ibuf, ilen, obuf, &olen);
- if (!ret && olen > crd->crd_len) {
- dprintk("cryptosoft: ERANGE compress %d into %d\n",
- crd->crd_len, olen);
- if (swcr_fail_if_compression_grows)
- ret = ERANGE;
- }
- } else { /* decompress */
- ret = crypto_comp_decompress(crypto_comp_cast(sw->sw_tfm),
- ibuf, ilen, obuf, &olen);
- if (!ret && (olen + crd->crd_inject) > crp->crp_olen) {
- dprintk("cryptosoft: ETOOSMALL decompress %d into %d, "
- "space for %d,at offset %d\n",
- crd->crd_len, olen, crp->crp_olen, crd->crd_inject);
- ret = ETOOSMALL;
- }
- }
- if (ret)
- dprintk("%s,%d: ret = %d\n", __FILE__, __LINE__, ret);
+ } break;
- /*
- * on success copy result back,
- * linux crpyto API returns -errno, we need to fix that
- */
- crp->crp_etype = ret < 0 ? -ret : ret;
- if (ret == 0) {
- /* copy back the result and return it's size */
- crypto_copyback(crp->crp_flags, crp->crp_buf,
- crd->crd_inject, olen, obuf);
- crp->crp_olen = olen;
- }
+ default:
+ /* Unknown/unsupported algorithm */
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ crp->crp_etype = EINVAL;
+ goto done;
+ }
+done:
+ crypto_done(crp);
+ kmem_cache_free(swcr_req_cache, req);
+}
- } break;
- default:
- /* Unknown/unsupported algorithm */
- dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
- crp->crp_etype = EINVAL;
+/*
+ * Process a crypto request.
+ */
+static int
+swcr_process(device_t dev, struct cryptop *crp, int hint)
+{
+ struct swcr_req *req = NULL;
+ u_int32_t lid;
+
+ dprintk("%s()\n", __FUNCTION__);
+ /* Sanity check */
+ if (crp == NULL) {
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ crp->crp_etype = 0;
+
+ if (crp->crp_desc == NULL || crp->crp_buf == NULL) {
+ dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ crp->crp_etype = EINVAL;
+ goto done;
+ }
+
+ lid = crp->crp_sid & 0xffffffff;
+ if (lid >= swcr_sesnum || lid == 0 || swcr_sessions == NULL ||
+ swcr_sessions[lid] == NULL) {
+ crp->crp_etype = ENOENT;
+ dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__);
+ goto done;
+ }
+
+ /*
+ * do some error checking outside of the loop for SKB and IOV processing
+ * this leaves us with valid skb or uiop pointers for later
+ */
+ if (crp->crp_flags & CRYPTO_F_SKBUF) {
+ struct sk_buff *skb = (struct sk_buff *) crp->crp_buf;
+ if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) {
+ printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", __FILE__, __LINE__,
+ skb_shinfo(skb)->nr_frags);
+ goto done;
+ }
+ } else if (crp->crp_flags & CRYPTO_F_IOV) {
+ struct uio *uiop = (struct uio *) crp->crp_buf;
+ if (uiop->uio_iovcnt > SCATTERLIST_MAX) {
+ printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", __FILE__, __LINE__,
+ uiop->uio_iovcnt);
goto done;
}
}
+ /*
+ * setup a new request ready for queuing
+ */
+ req = kmem_cache_alloc(swcr_req_cache, SLAB_ATOMIC);
+ if (req == NULL) {
+ dprintk("%s,%d: ENOMEM\n", __FILE__, __LINE__);
+ crp->crp_etype = ENOMEM;
+ goto done;
+ }
+ memset(req, 0, sizeof(*req));
+
+ req->sw_head = swcr_sessions[lid];
+ req->crp = crp;
+ req->crd = crp->crp_desc;
+
+ swcr_process_req(req);
+ return 0;
+
done:
crypto_done(crp);
+ if (req)
+ kmem_cache_free(swcr_req_cache, req);
return 0;
}
+
static int
cryptosoft_init(void)
{
dprintk("%s(%p)\n", __FUNCTION__, cryptosoft_init);
+ swcr_req_cache = kmem_cache_create("cryptosoft_req",
+ sizeof(struct swcr_req), 0, SLAB_HWCACHE_ALIGN, NULL
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
+ , NULL
+#endif
+ );
+ if (!swcr_req_cache) {
+ printk("cryptosoft: failed to create request cache\n");
+ return -ENOENT;
+ }
+
softc_device_init(&swcr_softc, "cryptosoft", 0, swcr_methods);
swcr_id = crypto_get_driverid(softc_get_device(&swcr_softc),
CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_SYNC);
if (swcr_id < 0) {
- printk("Software crypto device cannot initialize!");
+ printk("cryptosoft: Software crypto device cannot initialize!");
return -ENODEV;
}
#define REGISTER(alg) \
- crypto_register(swcr_id, alg, 0,0);
+ crypto_register(swcr_id, alg, 0,0)
- for (i = CRYPTO_ALGORITHM_MIN; i <= CRYPTO_ALGORITHM_MAX; ++i)
- {
+ for (i = 0; i < sizeof(crypto_details)/sizeof(crypto_details[0]); i++) {
+ int found;
algo = crypto_details[i].alg_name;
- if (!algo || !*algo)
- {
+ if (!algo || !*algo) {
dprintk("%s:Algorithm %d not supported\n", __FUNCTION__, i);
continue;
}
mode = crypto_details[i].mode;
sw_type = crypto_details[i].sw_type;
- switch (sw_type)
- {
- case SW_TYPE_CIPHER:
- if (crypto_has_cipher(algo, 0, CRYPTO_ALG_ASYNC))
- {
- REGISTER(i);
- }
- else
- {
- dprintk("%s:CIPHER algorithm %d:'%s' not supported\n",
- __FUNCTION__, i, algo);
- }
- break;
- case SW_TYPE_HMAC:
- if (crypto_has_hash(algo, 0, CRYPTO_ALG_ASYNC))
- {
- REGISTER(i);
- }
- else
- {
- dprintk("%s:HMAC algorithm %d:'%s' not supported\n",
- __FUNCTION__, i, algo);
- }
- break;
- case SW_TYPE_HASH:
- if (crypto_has_hash(algo, 0, CRYPTO_ALG_ASYNC))
- {
- REGISTER(i);
- }
- else
- {
- dprintk("%s:HASH algorithm %d:'%s' not supported\n",
- __FUNCTION__, i, algo);
- }
- break;
- case SW_TYPE_COMP:
- if (crypto_has_comp(algo, 0, CRYPTO_ALG_ASYNC))
- {
- REGISTER(i);
- }
- else
- {
- dprintk("%s:COMP algorithm %d:'%s' not supported\n",
- __FUNCTION__, i, algo);
- }
- break;
- case SW_TYPE_BLKCIPHER:
- if (crypto_has_blkcipher(algo, 0, CRYPTO_ALG_ASYNC))
- {
- REGISTER(i);
- }
- else
- {
- dprintk("%s:BLKCIPHER algorithm %d:'%s' not supported\n",
- __FUNCTION__, i, algo);
- }
- break;
- default:
- dprintk(
- "%s:Algorithm Type %d not supported (algorithm %d:'%s')\n",
+ found = 0;
+ switch (sw_type & SW_TYPE_ALG_MASK) {
+ case SW_TYPE_CIPHER:
+ found = crypto_has_cipher(algo, 0, CRYPTO_ALG_ASYNC);
+ break;
+ case SW_TYPE_HMAC:
+ found = crypto_has_hash(algo, 0, swcr_no_ahash?CRYPTO_ALG_ASYNC:0);
+ break;
+ case SW_TYPE_HASH:
+ found = crypto_has_hash(algo, 0, swcr_no_ahash?CRYPTO_ALG_ASYNC:0);
+ break;
+ case SW_TYPE_COMP:
+ found = crypto_has_comp(algo, 0, CRYPTO_ALG_ASYNC);
+ break;
+ case SW_TYPE_BLKCIPHER:
+ found = crypto_has_blkcipher(algo, 0, CRYPTO_ALG_ASYNC);
+ if (!found && !swcr_no_ablk)
+ found = crypto_has_ablkcipher(algo, 0, 0);
+ break;
+ }
+ if (found) {
+ REGISTER(i);
+ } else {
+ dprintk("%s:Algorithm Type %d not supported (algorithm %d:'%s')\n",
__FUNCTION__, sw_type, i, algo);
- break;
}
}
-
- return(0);
+ return 0;
}
static void
dprintk("%s()\n", __FUNCTION__);
crypto_unregister_all(swcr_id);
swcr_id = -1;
+ kmem_cache_destroy(swcr_req_cache);
}
-module_init(cryptosoft_init);
+late_initcall(cryptosoft_init);
module_exit(cryptosoft_exit);
MODULE_LICENSE("Dual BSD/GPL");
#
# GPL LICENSE SUMMARY
#
-# Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+# Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of version 2 of the GNU General Public License as
#
# BSD LICENSE
#
-# Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+# Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#
-# version: Security.L.1.0.130
+# version: Security.L.1.0.2-229
############################################################################
####################Common variables and definitions########################
+ifndef ICP_ROOT
+$(warning ICP_ROOT is undefined. Please set the path to EP80579 release package directory \
+ "-> setenv ICP_ROOT <path>")
+all fastdep:
+ :
+else
+
+ifndef KERNEL_SOURCE_ROOT
+$(error KERNEL_SOURCE_ROOT is undefined. Please set the path to the kernel source directory \
+ "-> setenv KERNEL_SOURCE_ROOT <path>")
+endif
+
# Ensure The ENV_DIR environmental var is defined.
ifndef ICP_ENV_DIR
-$(error ICP_ENV_DIR is undefined. Please set the path to your environment makefile \
+$(error ICP_ENV_DIR is undefined. Please set the path to EP80579 driver environment.mk file \
"-> setenv ICP_ENV_DIR <path>")
endif
#Add your project environment Makefile
-include $(ICP_ENV_DIR)/environment.mk
+include ${ICP_ENV_DIR}/environment.mk
#include the makefile with all the default and common Make variable definitions
-include $(ICP_BUILDSYSTEM_PATH)/build_files/common.mk
+include ${ICP_BUILDSYSTEM_PATH}/build_files/common.mk
#Add the name for the executable, Library or Module output definitions
OUTPUT_NAME= icp_ocf
# List of Source Files to be compiled
-SOURCES= icp_common.c icp_sym.c icp_asym.c
+SOURCES= icp_common.c icp_sym.c icp_asym.c icp_ocf_linux.c
#common includes between all supported OSes
-INCLUDES= -I $(ICP_API_DIR) -I$(ICP_LAC_API) \
--I$(ICP_OCF_SRC_DIR)
+INCLUDES= -I ${ICP_API_DIR} -I${ICP_LAC_API} \
+-I${ICP_OCF_SRC_DIR}
# The location of the os level makefile needs to be changed.
-include $(ICP_ENV_DIR)/$(ICP_OS)_$(ICP_OS_LEVEL).mk
+include ${ICP_ENV_DIR}/${ICP_OS}_${ICP_OS_LEVEL}.mk
# On the line directly below list the outputs you wish to build for,
-# e.g "lib_static lib_shared exe module" as show below
+# e.g "lib_static lib_shared exe module" as shown below
install: module
###################Include rules makefiles########################
-include $(ICP_BUILDSYSTEM_PATH)/build_files/rules.mk
+include ${ICP_BUILDSYSTEM_PATH}/build_files/rules.mk
###################End of Rules inclusion#########################
-
+endif
+++ /dev/null
- ###########################################################################
- #
-# This file is provided under a dual BSD/GPLv2 license. When using or
-# redistributing this file, you may do so under either license.
-#
-# GPL LICENSE SUMMARY
-#
-# Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of version 2 of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-# The full GNU General Public License is included in this distribution
-# in the file called LICENSE.GPL.
-#
-# Contact Information:
-# Intel Corporation
-#
-# BSD LICENSE
-#
-# Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-#
-# version: Security.L.1.0.130
- #
- ###########################################################################
-
-
-ICP_LAC_API=$(ICP_ROOT)/Acceleration/include/lac
-ICP_BTR_API=$(ICP_ROOT)/Acceleration/include/btr
-ICP_API_DIR=$(ICP_ROOT)/Acceleration/include
-ICP_OCF_SHIM_DIR?=$(KERNEL_SOURCE_ROOT)/crypto/ocf/
-
-ICP_OS_LEVEL?=kernel_space
-
-ICP_OS?=linux_2.6
-
-ICP_CORE?=ia
-
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
*
* BSD LICENSE
*
- * Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
- * version: Security.L.1.0.130
+ * version: Security.L.1.0.2-229
*
***************************************************************************/
to be changed.*/
/*DIFFIE HELLMAN buffer index values*/
-#define ICP_DH_KRP_PARAM_PRIME_INDEX (0)
-#define ICP_DH_KRP_PARAM_BASE_INDEX (1)
-#define ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX (2)
-#define ICP_DH_KRP_PARAM_RESULT_INDEX (3)
+#define ICP_DH_KRP_PARAM_PRIME_INDEX (0)
+#define ICP_DH_KRP_PARAM_BASE_INDEX (1)
+#define ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX (2)
+#define ICP_DH_KRP_PARAM_RESULT_INDEX (3)
/*MOD EXP buffer index values*/
-#define ICP_MOD_EXP_KRP_PARAM_BASE_INDEX (0)
-#define ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX (1)
-#define ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX (2)
-#define ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX (3)
-
-#define SINGLE_BYTE_VALUE (4)
+#define ICP_MOD_EXP_KRP_PARAM_BASE_INDEX (0)
+#define ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX (1)
+#define ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX (2)
+#define ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX (3)
/*MOD EXP CRT buffer index values*/
-#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX (0)
-#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX (1)
-#define ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX (2)
-#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX (3)
-#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX (4)
-#define ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX (5)
-#define ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX (6)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX (0)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX (1)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX (2)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX (3)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX (4)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX (5)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX (6)
/*DSA sign buffer index values*/
-#define ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX (0)
-#define ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX (1)
-#define ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX (2)
-#define ICP_DSA_SIGN_KRP_PARAM_G_INDEX (3)
-#define ICP_DSA_SIGN_KRP_PARAM_X_INDEX (4)
-#define ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX (5)
-#define ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX (6)
+#define ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX (0)
+#define ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX (1)
+#define ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX (2)
+#define ICP_DSA_SIGN_KRP_PARAM_G_INDEX (3)
+#define ICP_DSA_SIGN_KRP_PARAM_X_INDEX (4)
+#define ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX (5)
+#define ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX (6)
/*DSA verify buffer index values*/
-#define ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX (0)
-#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX (1)
-#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX (2)
-#define ICP_DSA_VERIFY_KRP_PARAM_G_INDEX (3)
-#define ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX (4)
-#define ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX (5)
-#define ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX (6)
+#define ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX (0)
+#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX (1)
+#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX (2)
+#define ICP_DSA_VERIFY_KRP_PARAM_G_INDEX (3)
+#define ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX (4)
+#define ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX (5)
+#define ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX (6)
/*DSA sign prime Q vs random number K size check values*/
-#define DONT_RUN_LESS_THAN_CHECK (0)
-#define FAIL_A_IS_GREATER_THAN_B (1)
-#define FAIL_A_IS_EQUAL_TO_B (1)
-#define SUCCESS_A_IS_LESS_THAN_B (0)
-#define DSA_SIGN_RAND_GEN_VAL_CHECK_MAX_ITERATIONS (500)
+#define DONT_RUN_LESS_THAN_CHECK (0)
+#define FAIL_A_IS_GREATER_THAN_B (1)
+#define FAIL_A_IS_EQUAL_TO_B (1)
+#define SUCCESS_A_IS_LESS_THAN_B (0)
+#define DSA_SIGN_RAND_GEN_VAL_CHECK_MAX_ITERATIONS (500)
/* We need to set a cryptokp success value just in case it is set or allocated
and not set to zero outside of this module */
-#define CRYPTO_OP_SUCCESS (0)
+#define CRYPTO_OP_SUCCESS (0)
+/*Function to compute Diffie Hellman (DH) phase 1 or phase 2 key values*/
static int icp_ocfDrvDHComputeKey(struct cryptkop *krp);
+/*Function to compute a Modular Exponentiation (Mod Exp)*/
static int icp_ocfDrvModExp(struct cryptkop *krp);
+/*Function to compute a Mod Exp using the Chinease Remainder Theorem*/
static int icp_ocfDrvModExpCRT(struct cryptkop *krp);
+/*Helper function to compute whether the first big number argument is less than
+ the second big number argument */
static int
icp_ocfDrvCheckALessThanB(CpaFlatBuffer * pK, CpaFlatBuffer * pQ, int *doCheck);
+/*Function to sign an input with DSA R and S keys*/
static int icp_ocfDrvDsaSign(struct cryptkop *krp);
+/*Function to Verify a DSA buffer signature*/
static int icp_ocfDrvDsaVerify(struct cryptkop *krp);
+/*Callback function for DH operation*/
static void
icp_ocfDrvDhP1CallBack(void *callbackTag,
CpaStatus status,
void *pOpData, CpaFlatBuffer * pLocalOctetStringPV);
+/*Callback function for ME operation*/
static void
icp_ocfDrvModExpCallBack(void *callbackTag,
CpaStatus status,
void *pOpData, CpaFlatBuffer * pResult);
+/*Callback function for ME CRT operation*/
static void
icp_ocfDrvModExpCRTCallBack(void *callbackTag,
CpaStatus status,
void *pOpData, CpaFlatBuffer * pOutputData);
-static void
-icp_ocfDrvDsaVerifyCallBack(void *callbackTag,
- CpaStatus status,
- void *pOpData, CpaBoolean verifyStatus);
-
+/*Callback function for DSA sign operation*/
static void
icp_ocfDrvDsaRSSignCallBack(void *callbackTag,
CpaStatus status,
CpaBoolean protocolStatus,
CpaFlatBuffer * pR, CpaFlatBuffer * pS);
+/*Callback function for DSA Verify operation*/
+static void
+icp_ocfDrvDsaVerifyCallBack(void *callbackTag,
+ CpaStatus status,
+ void *pOpData, CpaBoolean verifyStatus);
+
/* Name : icp_ocfDrvPkeProcess
*
* Description : This function will choose which PKE process to follow
* based on the input arguments
*/
-int icp_ocfDrvPkeProcess(device_t dev, struct cryptkop *krp, int hint)
+int icp_ocfDrvPkeProcess(icp_device_t dev, struct cryptkop *krp, int hint)
{
CpaStatus lacStatus = CPA_STATUS_SUCCESS;
return EINVAL;
}
- if (CPA_TRUE == atomic_read(&icp_ocfDrvIsExiting)) {
+ if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) {
krp->krp_status = ECANCELED;
return ECANCELED;
}
* It has been seen that in general we are passed little endian byte order
* buffers, but LAC only accepts big endian byte order buffers.
*/
-static void inline
-icp_ocfDrvSwapBytes(u_int8_t * num, u_int32_t buff_len_bytes)
+static void inline icp_ocfDrvSwapBytes(u_int8_t * num, u_int32_t buff_len_bytes)
{
int i;
callbackTag = krp;
- pPhase1OpData = kmem_cache_zalloc(drvDH_zone, GFP_KERNEL);
+/*All allocations are set to ICP_M_NOWAIT due to the possibility of getting
+called in interrupt context*/
+ pPhase1OpData = icp_kmem_cache_zalloc(drvDH_zone, ICP_M_NOWAIT);
if (NULL == pPhase1OpData) {
APRINTK("%s():Failed to get memory for key gen data\n",
__FUNCTION__);
return ENOMEM;
}
- pLocalOctetStringPV = kmem_cache_zalloc(drvFlatBuffer_zone, GFP_KERNEL);
+ pLocalOctetStringPV =
+ icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT);
if (NULL == pLocalOctetStringPV) {
APRINTK("%s():Failed to get memory for pLocalOctetStringPV\n",
__FUNCTION__);
- kmem_cache_free(drvDH_zone, pPhase1OpData);
+ ICP_CACHE_FREE(drvDH_zone, pPhase1OpData);
krp->krp_status = ENOMEM;
return ENOMEM;
}
EPRINTK("%s(): DH Phase 1 Key Gen failed (%d).\n",
__FUNCTION__, lacStatus);
icp_ocfDrvFreeFlatBuffer(pLocalOctetStringPV);
- kmem_cache_free(drvDH_zone, pPhase1OpData);
+ ICP_CACHE_FREE(drvDH_zone, pPhase1OpData);
}
return lacStatus;
callbackTag = krp;
- pModExpOpData = kmem_cache_zalloc(drvLnModExp_zone, GFP_KERNEL);
+ pModExpOpData = icp_kmem_cache_zalloc(drvLnModExp_zone, ICP_M_NOWAIT);
if (NULL == pModExpOpData) {
APRINTK("%s():Failed to get memory for key gen data\n",
__FUNCTION__);
return ENOMEM;
}
- pResult = kmem_cache_zalloc(drvFlatBuffer_zone, GFP_KERNEL);
+ pResult = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT);
if (NULL == pResult) {
APRINTK("%s():Failed to get memory for ModExp result\n",
__FUNCTION__);
- kmem_cache_free(drvLnModExp_zone, pModExpOpData);
+ ICP_CACHE_FREE(drvLnModExp_zone, pModExpOpData);
krp->krp_status = ENOMEM;
return ENOMEM;
}
icp_ocfDrvSwapBytes(pModExpOpData->modulus.pData,
pModExpOpData->modulus.dataLenInBytes);
- /*OCF patch to Openswan Pluto regularly sends the base value as 2
- bits in size. In this case, it has been found it is better to
- use the base size memory space as the input buffer (if the number
- is in bits is less than a byte, the number of bits is the input
- value) */
- if (krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_nbits <
- NUM_BITS_IN_BYTE) {
- DPRINTK("%s : base is small (%d)\n", __FUNCTION__, krp->
- krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_nbits);
- pModExpOpData->base.dataLenInBytes = SINGLE_BYTE_VALUE;
- pModExpOpData->base.pData =
- (uint8_t *) & (krp->
- krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].
- crp_nbits);
- *((uint32_t *) pModExpOpData->base.pData) =
- htonl(*((uint32_t *) pModExpOpData->base.pData));
-
- } else {
-
- DPRINTK("%s : base is big (%d)\n", __FUNCTION__, krp->
- krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_nbits);
- pModExpOpData->base.pData =
- krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_p;
- BITS_TO_BYTES(pModExpOpData->base.dataLenInBytes,
- krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].
- crp_nbits);
- icp_ocfDrvSwapBytes(pModExpOpData->base.pData,
- pModExpOpData->base.dataLenInBytes);
- }
+ DPRINTK("%s : base (%d)\n", __FUNCTION__, krp->
+ krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_nbits);
+ pModExpOpData->base.pData =
+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_p;
+ BITS_TO_BYTES(pModExpOpData->base.dataLenInBytes,
+ krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].
+ crp_nbits);
+ icp_ocfDrvSwapBytes(pModExpOpData->base.pData,
+ pModExpOpData->base.dataLenInBytes);
pModExpOpData->exponent.pData =
krp->krp_param[ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX].crp_p;
__FUNCTION__, lacStatus);
krp->krp_status = ECANCELED;
icp_ocfDrvFreeFlatBuffer(pResult);
- kmem_cache_free(drvLnModExp_zone, pModExpOpData);
+ ICP_CACHE_FREE(drvLnModExp_zone, pModExpOpData);
}
return lacStatus;
* numbers. Although basic primality checks are done in LAC, it is up to the
* user to do any correct prime number checking before passing the inputs.
*/
-
static int icp_ocfDrvModExpCRT(struct cryptkop *krp)
{
CpaStatus lacStatus = CPA_STATUS_SUCCESS;
them here. */
callbackTag = krp;
- rsaDecryptOpData = kmem_cache_zalloc(drvRSADecrypt_zone, GFP_KERNEL);
+ rsaDecryptOpData =
+ icp_kmem_cache_zalloc(drvRSADecrypt_zone, ICP_M_NOWAIT);
if (NULL == rsaDecryptOpData) {
APRINTK("%s():Failed to get memory"
" for MOD EXP CRT Op data struct\n", __FUNCTION__);
}
rsaDecryptOpData->pRecipientPrivateKey
- = kmem_cache_zalloc(drvRSAPrivateKey_zone, GFP_KERNEL);
+ = icp_kmem_cache_zalloc(drvRSAPrivateKey_zone, ICP_M_NOWAIT);
if (NULL == rsaDecryptOpData->pRecipientPrivateKey) {
APRINTK("%s():Failed to get memory for MOD EXP CRT"
" private key values struct\n", __FUNCTION__);
- kmem_cache_free(drvRSADecrypt_zone, rsaDecryptOpData);
+ ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData);
krp->krp_status = ENOMEM;
return ENOMEM;
}
rsaDecryptOpData->pRecipientPrivateKey->
privateKeyRepType = CPA_CY_RSA_PRIVATE_KEY_REP_TYPE_2;
- pOutputData = kmem_cache_zalloc(drvFlatBuffer_zone, GFP_KERNEL);
+ pOutputData = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT);
if (NULL == pOutputData) {
APRINTK("%s():Failed to get memory"
" for MOD EXP CRT output data\n", __FUNCTION__);
- kmem_cache_free(drvRSAPrivateKey_zone,
- rsaDecryptOpData->pRecipientPrivateKey);
- kmem_cache_free(drvRSADecrypt_zone, rsaDecryptOpData);
+ ICP_CACHE_FREE(drvRSAPrivateKey_zone,
+ rsaDecryptOpData->pRecipientPrivateKey);
+ ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData);
krp->krp_status = ENOMEM;
return ENOMEM;
}
__FUNCTION__, lacStatus);
krp->krp_status = ECANCELED;
icp_ocfDrvFreeFlatBuffer(pOutputData);
- kmem_cache_free(drvRSAPrivateKey_zone,
- rsaDecryptOpData->pRecipientPrivateKey);
- kmem_cache_free(drvRSADecrypt_zone, rsaDecryptOpData);
+ ICP_CACHE_FREE(drvRSAPrivateKey_zone,
+ rsaDecryptOpData->pRecipientPrivateKey);
+ ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData);
}
return lacStatus;
return EDOM;
}
- dsaRsSignOpData = kmem_cache_zalloc(drvDSARSSign_zone, GFP_KERNEL);
+ dsaRsSignOpData =
+ icp_kmem_cache_zalloc(drvDSARSSign_zone, ICP_M_NOWAIT);
if (NULL == dsaRsSignOpData) {
APRINTK("%s():Failed to get memory"
" for DSA RS Sign Op data struct\n", __FUNCTION__);
}
dsaRsSignOpData->K.pData =
- kmem_cache_alloc(drvDSARSSignKValue_zone, GFP_ATOMIC);
+ icp_kmem_cache_alloc(drvDSARSSignKValue_zone, ICP_M_NOWAIT);
if (NULL == dsaRsSignOpData->K.pData) {
APRINTK("%s():Failed to get memory"
" for DSA RS Sign Op Random value\n", __FUNCTION__);
- kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData);
+ ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
krp->krp_status = ENOMEM;
return ENOMEM;
}
- pR = kmem_cache_zalloc(drvFlatBuffer_zone, GFP_KERNEL);
+ pR = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT);
if (NULL == pR) {
APRINTK("%s():Failed to get memory"
" for DSA signature R\n", __FUNCTION__);
- kmem_cache_free(drvDSARSSignKValue_zone,
- dsaRsSignOpData->K.pData);
- kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData);
+ ICP_CACHE_FREE(drvDSARSSignKValue_zone,
+ dsaRsSignOpData->K.pData);
+ ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
krp->krp_status = ENOMEM;
return ENOMEM;
}
- pS = kmem_cache_zalloc(drvFlatBuffer_zone, GFP_KERNEL);
+ pS = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT);
if (NULL == pS) {
APRINTK("%s():Failed to get memory"
" for DSA signature S\n", __FUNCTION__);
icp_ocfDrvFreeFlatBuffer(pR);
- kmem_cache_free(drvDSARSSignKValue_zone,
- dsaRsSignOpData->K.pData);
- kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData);
+ ICP_CACHE_FREE(drvDSARSSignKValue_zone,
+ dsaRsSignOpData->K.pData);
+ ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
krp->krp_status = ENOMEM;
return ENOMEM;
}
"value\n", __FUNCTION__);
icp_ocfDrvFreeFlatBuffer(pS);
icp_ocfDrvFreeFlatBuffer(pR);
- kmem_cache_free(drvDSARSSignKValue_zone,
- dsaRsSignOpData->K.pData);
- kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData);
+ ICP_CACHE_FREE(drvDSARSSignKValue_zone,
+ dsaRsSignOpData->K.pData);
+ ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
krp->krp_status = EAGAIN;
return EAGAIN;
}
"value less than Q value\n", __FUNCTION__);
icp_ocfDrvFreeFlatBuffer(pS);
icp_ocfDrvFreeFlatBuffer(pR);
- kmem_cache_free(drvDSARSSignKValue_zone,
- dsaRsSignOpData->K.pData);
- kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData);
+ ICP_CACHE_FREE(drvDSARSSignKValue_zone,
+ dsaRsSignOpData->K.pData);
+ ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
krp->krp_status = EAGAIN;
return EAGAIN;
}
icp_ocfDrvSwapBytes(dsaRsSignOpData->X.pData,
dsaRsSignOpData->X.dataLenInBytes);
+ /*OpenSSL dgst parameter is left in big endian byte order,
+ therefore no byte swap is required */
dsaRsSignOpData->M.pData =
krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX].crp_p;
BITS_TO_BYTES(dsaRsSignOpData->M.dataLenInBytes,
krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX].
crp_nbits);
- icp_ocfDrvSwapBytes(dsaRsSignOpData->M.pData,
- dsaRsSignOpData->M.dataLenInBytes);
/* Output Parameters */
pS->pData = krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX].crp_p;
krp->krp_status = ECANCELED;
icp_ocfDrvFreeFlatBuffer(pS);
icp_ocfDrvFreeFlatBuffer(pR);
- kmem_cache_free(drvDSARSSignKValue_zone,
- dsaRsSignOpData->K.pData);
- kmem_cache_free(drvDSARSSign_zone, dsaRsSignOpData);
+ ICP_CACHE_FREE(drvDSARSSignKValue_zone,
+ dsaRsSignOpData->K.pData);
+ ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
}
return lacStatus;
callbackTag = krp;
- dsaVerifyOpData = kmem_cache_zalloc(drvDSAVerify_zone, GFP_KERNEL);
+ dsaVerifyOpData =
+ icp_kmem_cache_zalloc(drvDSAVerify_zone, ICP_M_NOWAIT);
if (NULL == dsaVerifyOpData) {
APRINTK("%s():Failed to get memory"
" for DSA Verify Op data struct\n", __FUNCTION__);
icp_ocfDrvSwapBytes(dsaVerifyOpData->Y.pData,
dsaVerifyOpData->Y.dataLenInBytes);
+ /*OpenSSL dgst parameter is left in big endian byte order,
+ therefore no byte swap is required */
dsaVerifyOpData->M.pData =
krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX].crp_p;
BITS_TO_BYTES(dsaVerifyOpData->M.dataLenInBytes,
krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX].
crp_nbits);
- icp_ocfDrvSwapBytes(dsaVerifyOpData->M.pData,
- dsaVerifyOpData->M.dataLenInBytes);
dsaVerifyOpData->R.pData =
krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX].crp_p;
if (CPA_STATUS_SUCCESS != lacStatus) {
EPRINTK("%s(): DSA Verify Operation failed (%d).\n",
__FUNCTION__, lacStatus);
- kmem_cache_free(drvDSAVerify_zone, dsaVerifyOpData);
+ ICP_CACHE_FREE(drvDSAVerify_zone, dsaVerifyOpData);
krp->krp_status = ECANCELED;
}
return lacStatus;
}
-/* Name : icp_ocfDrvReadRandom
- *
- * Description : This function will map RNG functionality calls from OCF
- * to the LAC API.
- */
-int icp_ocfDrvReadRandom(void *arg, uint32_t * buf, int maxwords)
-{
- CpaStatus lacStatus = CPA_STATUS_SUCCESS;
- CpaCyRandGenOpData randGenOpData;
- CpaFlatBuffer randData;
-
- if (NULL == buf) {
- APRINTK("%s(): Invalid input parameters\n", __FUNCTION__);
- return EINVAL;
- }
-
- /* maxwords here is number of integers to generate data for */
- randGenOpData.generateBits = CPA_TRUE;
-
- randGenOpData.lenInBytes = maxwords * sizeof(uint32_t);
-
- icp_ocfDrvPtrAndLenToFlatBuffer((Cpa8U *) buf,
- randGenOpData.lenInBytes, &randData);
-
- lacStatus = cpaCyRandGen(CPA_INSTANCE_HANDLE_SINGLE,
- NULL, NULL, &randGenOpData, &randData);
- if (CPA_STATUS_SUCCESS != lacStatus) {
- EPRINTK("%s(): icp_LacSymRandGen failed (%d). \n",
- __FUNCTION__, lacStatus);
- return RETURN_RAND_NUM_GEN_FAILED;
- }
-
- return randGenOpData.lenInBytes / sizeof(uint32_t);
-}
-
/* Name : icp_ocfDrvDhP1Callback
*
* Description : When this function returns it signifies that the LAC
DPRINTK("%s(): Invalid input parameters - "
"pLocalOctetStringPV Data is NULL\n", __FUNCTION__);
memset(pPhase1OpData, 0, sizeof(CpaCyDhPhase1KeyGenOpData));
- kmem_cache_free(drvDH_zone, pPhase1OpData);
+ ICP_CACHE_FREE(drvDH_zone, pPhase1OpData);
krp->krp_status = ECANCELED;
crypto_kdone(krp);
return;
icp_ocfDrvFreeFlatBuffer(pLocalOctetStringPV);
memset(pPhase1OpData, 0, sizeof(CpaCyDhPhase1KeyGenOpData));
- kmem_cache_free(drvDH_zone, pPhase1OpData);
+ ICP_CACHE_FREE(drvDH_zone, pPhase1OpData);
crypto_kdone(krp);
"pResult data is NULL\n", __FUNCTION__);
krp->krp_status = ECANCELED;
memset(pLnModExpOpData, 0, sizeof(CpaCyLnModExpOpData));
- kmem_cache_free(drvLnModExp_zone, pLnModExpOpData);
+ ICP_CACHE_FREE(drvLnModExp_zone, pLnModExpOpData);
crypto_kdone(krp);
return;
}
}
icp_ocfDrvFreeFlatBuffer(pResult);
memset(pLnModExpOpData, 0, sizeof(CpaCyLnModExpOpData));
- kmem_cache_free(drvLnModExp_zone, pLnModExpOpData);
+ ICP_CACHE_FREE(drvLnModExp_zone, pLnModExpOpData);
crypto_kdone(krp);
"pOutputData is NULL\n", __FUNCTION__);
memset(pDecryptData->pRecipientPrivateKey, 0,
sizeof(CpaCyRsaPrivateKey));
- kmem_cache_free(drvRSAPrivateKey_zone,
- pDecryptData->pRecipientPrivateKey);
+ ICP_CACHE_FREE(drvRSAPrivateKey_zone,
+ pDecryptData->pRecipientPrivateKey);
memset(pDecryptData, 0, sizeof(CpaCyRsaDecryptOpData));
- kmem_cache_free(drvRSADecrypt_zone, pDecryptData);
+ ICP_CACHE_FREE(drvRSADecrypt_zone, pDecryptData);
krp->krp_status = ECANCELED;
crypto_kdone(krp);
return;
icp_ocfDrvFreeFlatBuffer(pOutputData);
memset(pDecryptData->pRecipientPrivateKey, 0,
sizeof(CpaCyRsaPrivateKey));
- kmem_cache_free(drvRSAPrivateKey_zone,
- pDecryptData->pRecipientPrivateKey);
+ ICP_CACHE_FREE(drvRSAPrivateKey_zone,
+ pDecryptData->pRecipientPrivateKey);
memset(pDecryptData, 0, sizeof(CpaCyRsaDecryptOpData));
- kmem_cache_free(drvRSADecrypt_zone, pDecryptData);
+ ICP_CACHE_FREE(drvRSADecrypt_zone, pDecryptData);
crypto_kdone(krp);
DPRINTK("%s(): Invalid input parameter - "
"pR sign is NULL\n", __FUNCTION__);
icp_ocfDrvFreeFlatBuffer(pS);
- kmem_cache_free(drvDSARSSign_zone, pSignData);
+ ICP_CACHE_FREE(drvDSARSSign_zone, pSignData);
krp->krp_status = ECANCELED;
crypto_kdone(krp);
return;
DPRINTK("%s(): Invalid input parameter - "
"pS sign is NULL\n", __FUNCTION__);
icp_ocfDrvFreeFlatBuffer(pR);
- kmem_cache_free(drvDSARSSign_zone, pSignData);
+ ICP_CACHE_FREE(drvDSARSSign_zone, pSignData);
krp->krp_status = ECANCELED;
crypto_kdone(krp);
return;
icp_ocfDrvFreeFlatBuffer(pR);
icp_ocfDrvFreeFlatBuffer(pS);
memset(pSignData->K.pData, 0, pSignData->K.dataLenInBytes);
- kmem_cache_free(drvDSARSSignKValue_zone, pSignData->K.pData);
+ ICP_CACHE_FREE(drvDSARSSignKValue_zone, pSignData->K.pData);
memset(pSignData, 0, sizeof(CpaCyDsaRSSignOpData));
- kmem_cache_free(drvDSARSSign_zone, pSignData);
+ ICP_CACHE_FREE(drvDSARSSign_zone, pSignData);
crypto_kdone(krp);
return;
}
memset(pVerData, 0, sizeof(CpaCyDsaVerifyOpData));
- kmem_cache_free(drvDSAVerify_zone, pVerData);
+ ICP_CACHE_FREE(drvDSAVerify_zone, pVerData);
crypto_kdone(krp);
return;
-/***************************************************************************
+/*************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
*
* BSD LICENSE
*
- * Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
- * version: Security.L.1.0.130
+ * version: Security.L.1.0.2-229
*
***************************************************************************/
#include "icp_ocf.h"
-#define ICP_OCF_COMP_NAME "ICP_OCF"
-#define ICP_OCF_VER_MAIN (2)
-#define ICP_OCF_VER_MJR (0)
-#define ICP_OCF_VER_MNR (0)
+#define ICP_OCF_COMP_NAME "ICP_OCF"
+#define ICP_OCF_VER_MAIN (2)
+#define ICP_OCF_VER_MJR (1)
+#define ICP_OCF_VER_MNR (0)
-#define MAX_DEREG_RETRIES (100)
+#define MAX_DEREG_RETRIES (100)
#define DEFAULT_DEREG_RETRIES (10)
#define DEFAULT_DEREG_DELAY_IN_JIFFIES (10)
/* This defines the maximum number of sessions possible between OCF
- and the OCF Tolapai Driver. If set to zero, there is no limit. */
-#define DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT (0)
-#define NUM_SUPPORTED_CAPABILITIES (21)
+ and the OCF EP80579 Driver. If set to zero, there is no limit. */
+#define DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT (0)
+#define NUM_SUPPORTED_CAPABILITIES (21)
+
+/*Slab zone names*/
+#define ICP_SESSION_DATA_NAME "icp_ocf.SesDat"
+#define ICP_OP_DATA_NAME "icp_ocf.OpDat"
+#define ICP_DH_NAME "icp_ocf.DH"
+#define ICP_MODEXP_NAME "icp_ocf.ModExp"
+#define ICP_RSA_DECRYPT_NAME "icp_ocf.RSAdec"
+#define ICP_RSA_PKEY_NAME "icp_ocf.RSApk"
+#define ICP_DSA_SIGN_NAME "icp_ocf.DSAsg"
+#define ICP_DSA_VER_NAME "icp_ocf.DSAver"
+#define ICP_RAND_VAL_NAME "icp_ocf.DSArnd"
+#define ICP_FLAT_BUFF_NAME "icp_ocf.FB"
/*Slabs zones*/
-struct kmem_cache *drvSessionData_zone = NULL;
-struct kmem_cache *drvOpData_zone = NULL;
-struct kmem_cache *drvDH_zone = NULL;
-struct kmem_cache *drvLnModExp_zone = NULL;
-struct kmem_cache *drvRSADecrypt_zone = NULL;
-struct kmem_cache *drvRSAPrivateKey_zone = NULL;
-struct kmem_cache *drvDSARSSign_zone = NULL;
-struct kmem_cache *drvDSARSSignKValue_zone = NULL;
-struct kmem_cache *drvDSAVerify_zone = NULL;
+icp_kmem_cache drvSessionData_zone = NULL;
+icp_kmem_cache drvOpData_zone = NULL;
+icp_kmem_cache drvDH_zone = NULL;
+icp_kmem_cache drvLnModExp_zone = NULL;
+icp_kmem_cache drvRSADecrypt_zone = NULL;
+icp_kmem_cache drvRSAPrivateKey_zone = NULL;
+icp_kmem_cache drvDSARSSign_zone = NULL;
+icp_kmem_cache drvDSARSSignKValue_zone = NULL;
+icp_kmem_cache drvDSAVerify_zone = NULL;
/*Slab zones for flatbuffers and bufferlist*/
-struct kmem_cache *drvFlatBuffer_zone = NULL;
+icp_kmem_cache drvFlatBuffer_zone = NULL;
-static int icp_ocfDrvInit(void);
-static void icp_ocfDrvExit(void);
+static inline int icp_cache_null_check(void)
+{
+ return (drvSessionData_zone && drvOpData_zone
+ && drvDH_zone && drvLnModExp_zone && drvRSADecrypt_zone
+ && drvRSAPrivateKey_zone && drvDSARSSign_zone
+ && drvDSARSSign_zone && drvDSARSSignKValue_zone
+ && drvDSAVerify_zone && drvFlatBuffer_zone);
+}
+
+/*Function to free all allocated slab caches before exiting the module*/
static void icp_ocfDrvFreeCaches(void);
-static void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg);
int32_t icp_ocfDrvDriverId = INVALID_DRIVER_ID;
int dereg_retry_delay_in_jiffies = DEFAULT_DEREG_DELAY_IN_JIFFIES;
/* Module parameter - gives the maximum number of sessions possible between
- OCF and the OCF Tolapai Driver. If set to zero, there is no limit.*/
+ OCF and the OCF EP80579 Driver. If set to zero, there is no limit.*/
int max_sessions = DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT;
/* This is set when the module is removed from the system, no further
processing can take place if this is set */
-atomic_t icp_ocfDrvIsExiting = ATOMIC_INIT(0);
+icp_atomic_t icp_ocfDrvIsExiting = ICP_ATOMIC_INIT(0);
/* This is used to show how many lac sessions were not deregistered*/
-atomic_t lac_session_failed_dereg_count = ATOMIC_INIT(0);
+icp_atomic_t lac_session_failed_dereg_count = ICP_ATOMIC_INIT(0);
/* This is used to track the number of registered sessions between OCF and
- * and the OCF Tolapai driver, when max_session is set to value other than
+ * and the OCF EP80579 driver, when max_session is set to value other than
* zero. This ensures that the max_session set for the OCF and the driver
* is equal to the LAC registered sessions */
-atomic_t num_ocf_to_drv_registered_sessions = ATOMIC_INIT(0);
+icp_atomic_t num_ocf_to_drv_registered_sessions = ICP_ATOMIC_INIT(0);
/* Head of linked list used to store session data */
-struct list_head icp_ocfDrvGlobalSymListHead;
-struct list_head icp_ocfDrvGlobalSymListHead_FreeMemList;
+icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead;
+icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead_FreeMemList;
-spinlock_t icp_ocfDrvSymSessInfoListSpinlock = SPIN_LOCK_UNLOCKED;
-rwlock_t icp_kmem_cache_destroy_alloc_lock = RW_LOCK_UNLOCKED;
+icp_spinlock_t icp_ocfDrvSymSessInfoListSpinlock;
-struct workqueue_struct *icp_ocfDrvFreeLacSessionWorkQ;
+/*Below pointer is only used in linux, FreeBSD uses the name to
+create its own variable name*/
+icp_workqueue *icp_ocfDrvFreeLacSessionWorkQ = NULL;
+ICP_WORKQUEUE_DEFINE_THREAD(icp_ocfDrvFreeLacSessionWorkQ);
struct icp_drvBuffListInfo defBuffListInfo;
-static struct {
- softc_device_decl sc_dev;
-} icpDev;
-
-static device_method_t icp_methods = {
- /* crypto device methods */
- DEVMETHOD(cryptodev_newsession, icp_ocfDrvNewSession),
- DEVMETHOD(cryptodev_freesession, icp_ocfDrvFreeLACSession),
- DEVMETHOD(cryptodev_process, icp_ocfDrvSymProcess),
- DEVMETHOD(cryptodev_kprocess, icp_ocfDrvPkeProcess),
-};
-
-module_param(num_dereg_retries, int, S_IRUGO);
-module_param(dereg_retry_delay_in_jiffies, int, S_IRUGO);
-module_param(max_sessions, int, S_IRUGO);
-
-MODULE_PARM_DESC(num_dereg_retries,
- "Number of times to retry LAC Sym Session Deregistration. "
- "Default 10, Max 100");
-MODULE_PARM_DESC(dereg_retry_delay_in_jiffies, "Delay in jiffies "
- "(added to a schedule() function call) before a LAC Sym "
- "Session Dereg is retried. Default 10");
-MODULE_PARM_DESC(max_sessions, "This sets the maximum number of sessions "
- "between OCF and this driver. If this value is set to zero, "
- "max session count checking is disabled. Default is zero(0)");
-
/* Name : icp_ocfDrvInit
*
* Description : This function will register all the symmetric and asymmetric
* functionality that will be accelerated by the hardware. It will also
* get a unique driver ID from the OCF and initialise all slab caches
*/
-static int __init icp_ocfDrvInit(void)
+ICP_MODULE_INIT_FUNC(icp_ocfDrvInit)
{
int ocfStatus = 0;
if (MAX_DEREG_RETRIES < num_dereg_retries) {
EPRINTK("Session deregistration retry count set to greater "
"than %d", MAX_DEREG_RETRIES);
- return -1;
+ icp_module_return_code(EINVAL);
}
/* Initialize and Start the Cryptographic component */
cpaCyStartInstance(CPA_INSTANCE_HANDLE_SINGLE)) {
EPRINTK("Failed to initialize and start the instance "
"of the Cryptographic component.\n");
- return -1;
+ return icp_module_return_code(EINVAL);
}
+ icp_spin_lock_init(&icp_ocfDrvSymSessInfoListSpinlock);
+
/* Set the default size of BufferList to allocate */
memset(&defBuffListInfo, 0, sizeof(struct icp_drvBuffListInfo));
if (ICP_OCF_DRV_STATUS_SUCCESS !=
icp_ocfDrvBufferListMemInfo(ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS,
&defBuffListInfo)) {
EPRINTK("Failed to get bufferlist memory info.\n");
- return -1;
+ return icp_module_return_code(ENOMEM);
}
- /*Register OCF Tolapai Driver with OCF */
- memset(&icpDev, 0, sizeof(icpDev));
- softc_device_init(&icpDev, "icp", 0, icp_methods);
-
- icp_ocfDrvDriverId = crypto_get_driverid(softc_get_device(&icpDev),
- CRYPTOCAP_F_HARDWARE);
+ /*Register OCF EP80579 Driver with OCF */
+ icp_ocfDrvDriverId = ICP_CRYPTO_GET_DRIVERID();
if (icp_ocfDrvDriverId < 0) {
EPRINTK("%s : ICP driver failed to register with OCF!\n",
__FUNCTION__);
- return -ENODEV;
+ return icp_module_return_code(ENODEV);
}
- /*Create all the slab caches used by the OCF Tolapai Driver */
+ /*Create all the slab caches used by the OCF EP80579 Driver */
drvSessionData_zone =
- ICP_CACHE_CREATE("ICP Session Data", struct icp_drvSessionData);
- ICP_CACHE_NULL_CHECK(drvSessionData_zone);
+ ICP_CACHE_CREATE(ICP_SESSION_DATA_NAME, struct icp_drvSessionData);
/*
* Allocation of the OpData includes the allocation space for meta data.
* The memory after the opData structure is reserved for this meta data.
*/
drvOpData_zone =
- kmem_cache_create("ICP Op Data", sizeof(struct icp_drvOpData) +
- defBuffListInfo.metaSize ,0, SLAB_HWCACHE_ALIGN, NULL, NULL);
+ icp_kmem_cache_create(ICP_OP_DATA_NAME,
+ sizeof(struct icp_drvOpData) +
+ defBuffListInfo.metaSize,
+ ICP_KERNEL_CACHE_ALIGN,
+ ICP_KERNEL_CACHE_NOINIT);
-
- ICP_CACHE_NULL_CHECK(drvOpData_zone);
-
- drvDH_zone = ICP_CACHE_CREATE("ICP DH data", CpaCyDhPhase1KeyGenOpData);
- ICP_CACHE_NULL_CHECK(drvDH_zone);
+ drvDH_zone = ICP_CACHE_CREATE(ICP_DH_NAME, CpaCyDhPhase1KeyGenOpData);
drvLnModExp_zone =
- ICP_CACHE_CREATE("ICP ModExp data", CpaCyLnModExpOpData);
- ICP_CACHE_NULL_CHECK(drvLnModExp_zone);
+ ICP_CACHE_CREATE(ICP_MODEXP_NAME, CpaCyLnModExpOpData);
drvRSADecrypt_zone =
- ICP_CACHE_CREATE("ICP RSA decrypt data", CpaCyRsaDecryptOpData);
- ICP_CACHE_NULL_CHECK(drvRSADecrypt_zone);
+ ICP_CACHE_CREATE(ICP_RSA_DECRYPT_NAME, CpaCyRsaDecryptOpData);
drvRSAPrivateKey_zone =
- ICP_CACHE_CREATE("ICP RSA private key data", CpaCyRsaPrivateKey);
- ICP_CACHE_NULL_CHECK(drvRSAPrivateKey_zone);
+ ICP_CACHE_CREATE(ICP_RSA_PKEY_NAME, CpaCyRsaPrivateKey);
drvDSARSSign_zone =
- ICP_CACHE_CREATE("ICP DSA Sign", CpaCyDsaRSSignOpData);
- ICP_CACHE_NULL_CHECK(drvDSARSSign_zone);
+ ICP_CACHE_CREATE(ICP_DSA_SIGN_NAME, CpaCyDsaRSSignOpData);
/*too awkward to use a macro here */
drvDSARSSignKValue_zone =
- kmem_cache_create("ICP DSA Sign Rand Val",
- DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES, 0,
- SLAB_HWCACHE_ALIGN, NULL, NULL);
- ICP_CACHE_NULL_CHECK(drvDSARSSignKValue_zone);
+ ICP_CACHE_CREATE(ICP_RAND_VAL_NAME,
+ DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES);
drvDSAVerify_zone =
- ICP_CACHE_CREATE("ICP DSA Verify", CpaCyDsaVerifyOpData);
- ICP_CACHE_NULL_CHECK(drvDSAVerify_zone);
+ ICP_CACHE_CREATE(ICP_DSA_VER_NAME, CpaCyDsaVerifyOpData);
drvFlatBuffer_zone =
- ICP_CACHE_CREATE("ICP Flat Buffers", CpaFlatBuffer);
- ICP_CACHE_NULL_CHECK(drvFlatBuffer_zone);
+ ICP_CACHE_CREATE(ICP_FLAT_BUFF_NAME, CpaFlatBuffer);
+
+ if (0 == icp_cache_null_check()) {
+ icp_ocfDrvFreeCaches();
+ EPRINTK("%s() line %d: Not enough memory!\n",
+ __FUNCTION__, __LINE__);
+ return ENOMEM;
+ }
/* Register the ICP symmetric crypto support. */
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_NULL_CBC);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_DES_CBC);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_3DES_CBC);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_AES_CBC);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_ARC4);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_MD5);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_MD5_HMAC);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA1);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA1_HMAC);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_256);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_256_HMAC);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_384);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_384_HMAC);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_512);
- ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(CRYPTO_SHA2_512_HMAC);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_NULL_CBC, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_DES_CBC, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_3DES_CBC, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_AES_CBC, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_ARC4, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_MD5, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_MD5_HMAC, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA1, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA1_HMAC, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_256, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_256_HMAC,
+ ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_384, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_384_HMAC,
+ ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_512, ocfStatus);
+ ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_512_HMAC,
+ ocfStatus);
/* Register the ICP asymmetric algorithm support */
- ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(CRK_DH_COMPUTE_KEY);
- ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(CRK_MOD_EXP);
- ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(CRK_MOD_EXP_CRT);
- ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(CRK_DSA_SIGN);
- ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(CRK_DSA_VERIFY);
+ ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DH_COMPUTE_KEY,
+ ocfStatus);
+ ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_MOD_EXP, ocfStatus);
+ ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_MOD_EXP_CRT, ocfStatus);
+ ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DSA_SIGN, ocfStatus);
+ ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DSA_VERIFY, ocfStatus);
/* Register the ICP random number generator support */
- if (OCF_REGISTRATION_STATUS_SUCCESS ==
- crypto_rregister(icp_ocfDrvDriverId, icp_ocfDrvReadRandom, NULL)) {
- ocfStatus++;
- }
+ ICP_REG_RAND_WITH_OCF(icp_ocfDrvDriverId,
+ icp_ocfDrvReadRandom, NULL, ocfStatus);
if (OCF_ZERO_FUNCTIONALITY_REGISTERED == ocfStatus) {
DPRINTK("%s: Failed to register any device capabilities\n",
__FUNCTION__);
icp_ocfDrvFreeCaches();
icp_ocfDrvDriverId = INVALID_DRIVER_ID;
- return -ECANCELED;
+ return icp_module_return_code(ECANCELED);
}
DPRINTK("%s: Registered %d of %d device capabilities\n",
__FUNCTION__, ocfStatus, NUM_SUPPORTED_CAPABILITIES);
-/*Session data linked list used during module exit*/
- INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead);
- INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead_FreeMemList);
+ /*Session data linked list used during module exit */
+ ICP_INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead);
+ ICP_INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead_FreeMemList);
- icp_ocfDrvFreeLacSessionWorkQ =
- create_singlethread_workqueue("ocfLacDeregWorkQueue");
+ ICP_WORKQUEUE_CREATE(icp_ocfDrvFreeLacSessionWorkQ, "icpwq");
+ if (ICP_WORKQUEUE_NULL_CHECK(icp_ocfDrvFreeLacSessionWorkQ)) {
+ EPRINTK("%s: Failed to create single "
+ "thread workqueue\n", __FUNCTION__);
+ icp_ocfDrvFreeCaches();
+ icp_ocfDrvDriverId = INVALID_DRIVER_ID;
+ return icp_module_return_code(ENOMEM);
+ }
- return 0;
+ return icp_module_return_code(0);
}
/* Name : icp_ocfDrvExit
* and asymmetric functionality that can be accelerated by the hardware via OCF
* and random number generation if it is enabled.
*/
-static void icp_ocfDrvExit(void)
+ICP_MODULE_EXIT_FUNC(icp_ocfDrvExit)
{
CpaStatus lacStatus = CPA_STATUS_SUCCESS;
struct icp_drvSessionData *sessionData = NULL;
struct icp_drvSessionData *tempSessionData = NULL;
int i, remaining_delay_time_in_jiffies = 0;
+
+ /* For FreeBSD the invariant macro below makes function to return */
+ /* with EBUSY value in the case of any session which has been regi- */
+ /* stered with LAC not being deregistered. */
+ /* The Linux implementation is empty since it is purely to compensate */
+ /* for a limitation of the FreeBSD 7.1 Opencrypto framework. */
+
+ ICP_MODULE_EXIT_INV();
+
/* There is a possibility of a process or new session command being */
/* sent before this variable is incremented. The aim of this variable */
/* is to stop a loop of calls creating a deadlock situation which */
/* would prevent the driver from exiting. */
-
- atomic_inc(&icp_ocfDrvIsExiting);
+ icp_atomic_set(&icp_ocfDrvIsExiting, 1);
/*Existing sessions will be routed to another driver after these calls */
crypto_unregister_all(icp_ocfDrvDriverId);
crypto_runregister_all(icp_ocfDrvDriverId);
+ if (ICP_WORKQUEUE_NULL_CHECK(icp_ocfDrvFreeLacSessionWorkQ)) {
+ DPRINTK("%s: workqueue already "
+ "destroyed, therefore module exit "
+ " function already called. Exiting.\n", __FUNCTION__);
+ return ICP_MODULE_EXIT_FUNC_RETURN_VAL;
+ }
/*If any sessions are waiting to be deregistered, do that. This also
flushes the work queue */
- destroy_workqueue(icp_ocfDrvFreeLacSessionWorkQ);
+ ICP_WORKQUEUE_DESTROY(icp_ocfDrvFreeLacSessionWorkQ);
/*ENTER CRITICAL SECTION */
- spin_lock_bh(&icp_ocfDrvSymSessInfoListSpinlock);
- list_for_each_entry_safe(tempSessionData, sessionData,
- &icp_ocfDrvGlobalSymListHead, listNode) {
+ icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock);
+
+ ICP_LIST_FOR_EACH_ENTRY_SAFE(tempSessionData, sessionData,
+ &icp_ocfDrvGlobalSymListHead, listNode) {
for (i = 0; i < num_dereg_retries; i++) {
/*No harm if bad input - LAC will handle error cases */
if (ICP_SESSION_RUNNING == tempSessionData->inUse) {
/* Succesfully deregistered */
break;
} else if (CPA_STATUS_RETRY != lacStatus) {
- atomic_inc
+ icp_atomic_inc
(&lac_session_failed_dereg_count);
break;
}
dereg_retry_delay_in_jiffies;
while (0 > remaining_delay_time_in_jiffies) {
remaining_delay_time_in_jiffies =
- schedule_timeout
- (remaining_delay_time_in_jiffies);
+ icp_schedule_timeout
+ (&icp_ocfDrvSymSessInfoListSpinlock,
+ remaining_delay_time_in_jiffies);
}
DPRINTK
}
/*remove from current list */
- list_del(&(tempSessionData->listNode));
+ ICP_LIST_DEL(tempSessionData, listNode);
/*add to free mem linked list */
- list_add(&(tempSessionData->listNode),
- &icp_ocfDrvGlobalSymListHead_FreeMemList);
+ ICP_LIST_ADD(tempSessionData,
+ &icp_ocfDrvGlobalSymListHead_FreeMemList,
+ listNode);
}
/*EXIT CRITICAL SECTION */
- spin_unlock_bh(&icp_ocfDrvSymSessInfoListSpinlock);
+ icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock);
/*set back to initial values */
sessionData = NULL;
/*still have a reference in our list! */
tempSessionData = NULL;
/*free memory */
- list_for_each_entry_safe(tempSessionData, sessionData,
- &icp_ocfDrvGlobalSymListHead_FreeMemList,
- listNode) {
- list_del(&(tempSessionData->listNode));
+ ICP_LIST_FOR_EACH_ENTRY_SAFE(tempSessionData, sessionData,
+ &icp_ocfDrvGlobalSymListHead_FreeMemList,
+ listNode) {
+
+ ICP_LIST_DEL(tempSessionData, listNode);
/* Free allocated CpaCySymSessionCtx */
if (NULL != tempSessionData->sessHandle) {
- kfree(tempSessionData->sessHandle);
+ icp_kfree(tempSessionData->sessHandle);
}
memset(tempSessionData, 0, sizeof(struct icp_drvSessionData));
- kmem_cache_free(drvSessionData_zone, tempSessionData);
+ ICP_CACHE_FREE(drvSessionData_zone, tempSessionData);
}
- if (0 != atomic_read(&lac_session_failed_dereg_count)) {
+ if (0 != icp_atomic_read(&lac_session_failed_dereg_count)) {
DPRINTK("%s(): %d LAC sessions were not deregistered "
"correctly. This is not a clean exit! \n",
__FUNCTION__,
- atomic_read(&lac_session_failed_dereg_count));
+ icp_atomic_read(&lac_session_failed_dereg_count));
}
icp_ocfDrvFreeCaches();
icp_ocfDrvDriverId = INVALID_DRIVER_ID;
+ icp_spin_lock_destroy(&icp_ocfDrvSymSessInfoListSpinlock);
+
/* Shutdown the Cryptographic component */
lacStatus = cpaCyStopInstance(CPA_INSTANCE_HANDLE_SINGLE);
if (CPA_STATUS_SUCCESS != lacStatus) {
__FUNCTION__, lacStatus);
}
+ return ICP_MODULE_EXIT_FUNC_RETURN_VAL;
}
/* Name : icp_ocfDrvFreeCaches
*/
static void icp_ocfDrvFreeCaches(void)
{
- if (atomic_read(&icp_ocfDrvIsExiting) != CPA_TRUE) {
- atomic_set(&icp_ocfDrvIsExiting, 1);
- }
+ icp_atomic_set(&icp_ocfDrvIsExiting, 1);
/*Sym Zones */
ICP_CACHE_DESTROY(drvSessionData_zone);
* off to a work queue. If it fails, nothing more can be done and it
* returns an error
*/
-
int icp_ocfDrvDeregRetry(CpaCySymSessionCtx sessionToDeregister)
{
struct icp_ocfDrvFreeLacSession *workstore = NULL;
/*make sure the session is not available to be allocated during this
process */
- atomic_inc(&lac_session_failed_dereg_count);
+ icp_atomic_inc(&lac_session_failed_dereg_count);
/*Farm off to work queue */
workstore =
- kmalloc(sizeof(struct icp_ocfDrvFreeLacSession), GFP_ATOMIC);
+ icp_kmalloc(sizeof(struct icp_ocfDrvFreeLacSession), ICP_M_NOWAIT);
if (NULL == workstore) {
DPRINTK("%s(): unable to free session - no memory available "
"for work queue\n", __FUNCTION__);
workstore->sessionToDeregister = sessionToDeregister;
- INIT_WORK(&(workstore->work), icp_ocfDrvDeferedFreeLacSessionProcess,
- workstore);
- queue_work(icp_ocfDrvFreeLacSessionWorkQ, &(workstore->work));
+ icp_init_work(&(workstore->work),
+ icp_ocfDrvDeferedFreeLacSessionTaskFn, workstore);
+
+ ICP_WORKQUEUE_ENQUEUE(icp_ocfDrvFreeLacSessionWorkQ,
+ &(workstore->work));
return ICP_OCF_DRV_STATUS_SUCCESS;
* CPA_STATUS_RETRY message from the LAC component. This function is run in
* Thread context because it is called from a worker thread
*/
-static void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg)
+void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg)
{
struct icp_ocfDrvFreeLacSession *workstore = NULL;
CpaCySymSessionCtx sessionToDeregister = NULL;
}
sessionToDeregister = workstore->sessionToDeregister;
- kfree(workstore);
+ icp_kfree(workstore);
/*if exiting, give deregistration one more blast only */
- if (atomic_read(&icp_ocfDrvIsExiting) == CPA_TRUE) {
+ if (icp_atomic_read(&icp_ocfDrvIsExiting) == CPA_TRUE) {
lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE,
sessionToDeregister);
return;
}
- atomic_dec(&lac_session_failed_dereg_count);
+ icp_atomic_dec(&lac_session_failed_dereg_count);
return;
}
sessionToDeregister);
if (lacStatus == CPA_STATUS_SUCCESS) {
- atomic_dec(&lac_session_failed_dereg_count);
+ icp_atomic_dec(&lac_session_failed_dereg_count);
return;
}
if (lacStatus != CPA_STATUS_RETRY) {
/*schedule_timout returns the time left for completion if this
task is set to TASK_INTERRUPTIBLE */
remaining_delay_time_in_jiffies = dereg_retry_delay_in_jiffies;
- while (0 > remaining_delay_time_in_jiffies) {
+ while (0 < remaining_delay_time_in_jiffies) {
remaining_delay_time_in_jiffies =
- schedule_timeout(remaining_delay_time_in_jiffies);
+ icp_schedule_timeout(NULL,
+ remaining_delay_time_in_jiffies);
}
}
DPRINTK("%s(): Unable to deregister session\n", __FUNCTION__);
DPRINTK("%s(): Number of unavailable LAC sessions = %d\n", __FUNCTION__,
- atomic_read(&lac_session_failed_dereg_count));
+ icp_atomic_read(&lac_session_failed_dereg_count));
}
/* Name : icp_ocfDrvPtrAndLenToFlatBuffer
pFlatBuffer->dataLenInBytes = len;
}
-/* Name : icp_ocfDrvSingleSkBuffToFlatBuffer
- *
- * Description : This function converts a single socket buffer (sk_buff)
- * structure to a Fredericksburg Flat Buffer (CpaFlatBuffer) format.
- *
- * This function assumes that the data passed in are valid.
- */
-static inline void
-icp_ocfDrvSingleSkBuffToFlatBuffer(struct sk_buff *pSkb,
- CpaFlatBuffer * pFlatBuffer)
-{
- pFlatBuffer->pData = pSkb->data;
- pFlatBuffer->dataLenInBytes = skb_headlen(pSkb);
-}
-
-/* Name : icp_ocfDrvSkBuffToBufferList
- *
- * Description : This function converts a socket buffer (sk_buff) structure to
- * Fredericksburg Scatter/Gather (CpaBufferList) buffer format.
- *
- * This function assumes that the bufferlist has been allocated with the correct
- * number of buffer arrays.
- *
- */
-inline int
-icp_ocfDrvSkBuffToBufferList(struct sk_buff *pSkb, CpaBufferList * bufferList)
-{
- CpaFlatBuffer *curFlatBuffer = NULL;
- char *skbuffPageAddr = NULL;
- struct sk_buff *pCurFrag = NULL;
- struct skb_shared_info *pShInfo = NULL;
- uint32_t page_offset = 0, i = 0;
-
- DPRINTK("%s(): Entry Point\n", __FUNCTION__);
-
- /*
- * In all cases, the first skb needs to be translated to FlatBuffer.
- * Perform a buffer translation for the first skbuff
- */
- curFlatBuffer = bufferList->pBuffers;
- icp_ocfDrvSingleSkBuffToFlatBuffer(pSkb, curFlatBuffer);
-
- /* Set the userData to point to the original sk_buff */
- bufferList->pUserData = (void *)pSkb;
-
- /* We now know we'll have at least one element in the SGL */
- bufferList->numBuffers = 1;
-
- if (0 == skb_is_nonlinear(pSkb)) {
- /* Is a linear buffer - therefore it's a single skbuff */
- DPRINTK("%s(): Exit Point\n", __FUNCTION__);
- return ICP_OCF_DRV_STATUS_SUCCESS;
- }
-
- curFlatBuffer++;
- pShInfo = skb_shinfo(pSkb);
- if (pShInfo->frag_list != NULL && pShInfo->nr_frags != 0) {
- EPRINTK("%s():"
- "Translation for a combination of frag_list "
- "and frags[] array not supported!\n", __FUNCTION__);
- return ICP_OCF_DRV_STATUS_FAIL;
- } else if (pShInfo->frag_list != NULL) {
- /*
- * Non linear skbuff supported through frag_list
- * Perform translation for each fragment (sk_buff)
- * in the frag_list of the first sk_buff.
- */
- for (pCurFrag = pShInfo->frag_list;
- pCurFrag != NULL; pCurFrag = pCurFrag->next) {
- icp_ocfDrvSingleSkBuffToFlatBuffer(pCurFrag,
- curFlatBuffer);
- curFlatBuffer++;
- bufferList->numBuffers++;
- }
- } else if (pShInfo->nr_frags != 0) {
- /*
- * Perform translation for each fragment in frags array
- * and add to the BufferList
- */
- for (i = 0; i < pShInfo->nr_frags; i++) {
- /* Get the page address and offset of this frag */
- skbuffPageAddr = (char *)pShInfo->frags[i].page;
- page_offset = pShInfo->frags[i].page_offset;
-
- /* Convert a pointer and length to a flat buffer */
- icp_ocfDrvPtrAndLenToFlatBuffer(skbuffPageAddr +
- page_offset,
- pShInfo->frags[i].size,
- curFlatBuffer);
- curFlatBuffer++;
- bufferList->numBuffers++;
- }
- } else {
- EPRINTK("%s():" "Could not recognize skbuff fragments!\n",
- __FUNCTION__);
- return ICP_OCF_DRV_STATUS_FAIL;
- }
-
- DPRINTK("%s(): Exit Point\n", __FUNCTION__);
- return ICP_OCF_DRV_STATUS_SUCCESS;
-}
-
-/* Name : icp_ocfDrvBufferListToSkBuff
- *
- * Description : This function converts a Fredericksburg Scatter/Gather
- * (CpaBufferList) buffer format to socket buffer structure.
- */
-inline int
-icp_ocfDrvBufferListToSkBuff(CpaBufferList * bufferList, struct sk_buff **skb)
-{
- DPRINTK("%s(): Entry Point\n", __FUNCTION__);
-
- /* Retrieve the orignal skbuff */
- *skb = (struct sk_buff *)bufferList->pUserData;
- if (NULL == *skb) {
- EPRINTK("%s():"
- "Error on converting from a BufferList. "
- "The BufferList does not contain an sk_buff.\n",
- __FUNCTION__);
- return ICP_OCF_DRV_STATUS_FAIL;
- }
- DPRINTK("%s(): Exit Point\n", __FUNCTION__);
- return ICP_OCF_DRV_STATUS_SUCCESS;
-}
-
/* Name : icp_ocfDrvPtrAndLenToBufferList
*
* Description : This function converts a "pointer and length" buffer
return ICP_OCF_DRV_STATUS_SUCCESS;
}
-/* Name : icp_ocfDrvGetSkBuffFrags
- *
- * Description : This function will determine the number of
- * fragments in a socket buffer(sk_buff).
- */
-inline uint16_t icp_ocfDrvGetSkBuffFrags(struct sk_buff * pSkb)
-{
- uint16_t numFrags = 0;
- struct sk_buff *pCurFrag = NULL;
- struct skb_shared_info *pShInfo = NULL;
-
- if (NULL == pSkb)
- return 0;
-
- numFrags = 1;
- if (0 == skb_is_nonlinear(pSkb)) {
- /* Linear buffer - it's a single skbuff */
- return numFrags;
- }
-
- pShInfo = skb_shinfo(pSkb);
- if (NULL != pShInfo->frag_list && 0 != pShInfo->nr_frags) {
- EPRINTK("%s(): Combination of frag_list "
- "and frags[] array not supported!\n", __FUNCTION__);
- return 0;
- } else if (0 != pShInfo->nr_frags) {
- numFrags += pShInfo->nr_frags;
- return numFrags;
- } else if (NULL != pShInfo->frag_list) {
- for (pCurFrag = pShInfo->frag_list;
- pCurFrag != NULL; pCurFrag = pCurFrag->next) {
- numFrags++;
- }
- return numFrags;
- } else {
- return 0;
- }
-}
-
/* Name : icp_ocfDrvFreeFlatBuffer
*
* Description : This function will deallocate flat buffer.
{
if (pFlatBuffer != NULL) {
memset(pFlatBuffer, 0, sizeof(CpaFlatBuffer));
- kmem_cache_free(drvFlatBuffer_zone, pFlatBuffer);
+ ICP_CACHE_FREE(drvFlatBuffer_zone, pFlatBuffer);
}
}
*/
inline int
icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList,
- const struct icp_drvOpData *pOpData)
+ struct icp_drvOpData *pOpData)
{
Cpa32U metaSize = 0;
- if (pBufferList->numBuffers <= ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS){
- void *pOpDataStartAddr = (void *)pOpData;
+ if (pBufferList->numBuffers <= ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) {
+ uint8_t *pOpDataStartAddr = (uint8_t *) pOpData;
- if (0 == defBuffListInfo.metaSize) {
+ if (0 == defBuffListInfo.metaSize) {
pBufferList->pPrivateMetaData = NULL;
return ICP_OCF_DRV_STATUS_SUCCESS;
}
* op data. It has been pre-allocated in memory just after the
* icp_drvOpData structure.
*/
- pBufferList->pPrivateMetaData = pOpDataStartAddr +
- sizeof(struct icp_drvOpData);
+ pBufferList->pPrivateMetaData = (void *)(pOpDataStartAddr +
+ sizeof(struct
+ icp_drvOpData));
} else {
if (CPA_STATUS_SUCCESS !=
cpaCyBufferListGetMetaSize(CPA_INSTANCE_HANDLE_SINGLE,
return ICP_OCF_DRV_STATUS_SUCCESS;
}
- pBufferList->pPrivateMetaData = kmalloc(metaSize, GFP_ATOMIC);
+ pBufferList->pPrivateMetaData =
+ icp_kmalloc(metaSize, ICP_M_NOWAIT);
}
if (NULL == pBufferList->pPrivateMetaData) {
EPRINTK("%s() Failed to allocate pPrivateMetaData.\n",
* Otherwise, the meta data shall be freed when the icp_drvOpData is
* freed.
*/
- if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS < pBufferList->numBuffers){
- kfree(pBufferList->pPrivateMetaData);
+ if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS < pBufferList->numBuffers) {
+ icp_kfree(pBufferList->pPrivateMetaData);
}
}
-module_init(icp_ocfDrvInit);
-module_exit(icp_ocfDrvExit);
-MODULE_LICENSE("Dual BSD/GPL");
-MODULE_AUTHOR("Intel");
-MODULE_DESCRIPTION("OCF Driver for Intel Quick Assist crypto acceleration");
+/* Module declaration, init and exit functions */
+ICP_DECLARE_MODULE(icp_ocf, icp_ocfDrvInit, icp_ocfDrvExit);
+ICP_MODULE_DESCRIPTION("OCF Driver for Intel Quick Assist crypto acceleration");
+ICP_MODULE_VERSION(icp_ocf, ICP_OCF_VER_MJR);
+ICP_MODULE_LICENSE("Dual BSD/GPL");
+ICP_MODULE_AUTHOR("Intel");
+
+/* Module parameters */
+ICP_MODULE_PARAM_INT(icp_ocf, num_dereg_retries,
+ "Number of times to retry LAC Sym Session Deregistration. "
+ "Default 10, Max 100");
+ICP_MODULE_PARAM_INT(icp_ocf, dereg_retry_delay_in_jiffies, "Delay in jiffies "
+ "(added to a schedule() function call) before a LAC Sym "
+ "Session Dereg is retried. Default 10");
+ICP_MODULE_PARAM_INT(icp_ocf, max_sessions,
+ "This sets the maximum number of sessions "
+ "between OCF and this driver. If this value is set to zero,"
+ "max session count checking is disabled. Default is zero(0)");
+
+/* Module dependencies */
+#define MODULE_MIN_VER 1
+#define CRYPTO_MAX_VER 3
+#define LAC_MAX_VER 2
+
+ICP_MODULE_DEPEND(icp_ocf, crypto, MODULE_MIN_VER, MODULE_MIN_VER,
+ CRYPTO_MAX_VER);
+ICP_MODULE_DEPEND(icp_ocf, cryptodev, MODULE_MIN_VER, MODULE_MIN_VER,
+ CRYPTO_MAX_VER);
+ICP_MODULE_DEPEND(icp_ocf, icp_crypto, MODULE_MIN_VER, MODULE_MIN_VER,
+ LAC_MAX_VER);
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
*
* BSD LICENSE
*
- * Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
- * version: Security.L.1.0.130
+ * version: Security.L.1.0.2-229
*
***************************************************************************/
/*
- * OCF drv driver header file for the Intel ICP processor.
+ * OCF driver header file for the Intel ICP processor.
*/
-#ifndef ICP_OCF_H
-#define ICP_OCF_H
+#ifndef ICP_OCF_H_
+#define ICP_OCF_H_
-#include <linux/crypto.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
+#include <cpa.h>
+#include <cpa_cy_im.h>
+#include <cpa_cy_sym.h>
+#include <cpa_cy_rand.h>
+#include <cpa_cy_dh.h>
+#include <cpa_cy_rsa.h>
+#include <cpa_cy_ln.h>
+#include <cpa_cy_common.h>
+#include <cpa_cy_dsa.h>
-#include "cryptodev.h"
-#include "uio.h"
-
-#include "cpa.h"
-#include "cpa_cy_im.h"
-#include "cpa_cy_sym.h"
-#include "cpa_cy_rand.h"
-#include "cpa_cy_dh.h"
-#include "cpa_cy_rsa.h"
-#include "cpa_cy_ln.h"
-#include "cpa_cy_common.h"
-#include "cpa_cy_dsa.h"
+#include "icp_os.h"
#define NUM_BITS_IN_BYTE (8)
#define NUM_BITS_IN_BYTE_MINUS_ONE (NUM_BITS_IN_BYTE -1)
#define INVALID_DRIVER_ID (-1)
#define RETURN_RAND_NUM_GEN_FAILED (-1)
-/*This is define means only one operation can be chained to another
-(resulting in one chain of two operations)*/
-#define MAX_NUM_OF_CHAINED_OPS (1)
/*This is the max block cipher initialisation vector*/
#define MAX_IV_LEN_IN_BYTES (20)
/*This is used to check whether the OCF to this driver session limit has
#define ICP_OCF_PRINT_KERN_ALERT (1)
#define ICP_OCF_PRINT_KERN_ERRS (1)
-/*DSA Prime Q size in bytes (as defined in the standard) */
-#define DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES (20)
-
-/*MACRO DEFINITIONS*/
-
-#define BITS_TO_BYTES(bytes, bits) \
- bytes = (bits + NUM_BITS_IN_BYTE_MINUS_ONE) / NUM_BITS_IN_BYTE
-
-#define ICP_CACHE_CREATE(cache_ID, cache_name) \
- kmem_cache_create(cache_ID, sizeof(cache_name),0, \
- SLAB_HWCACHE_ALIGN, NULL, NULL);
-
-#define ICP_CACHE_NULL_CHECK(slab_zone) \
-{ \
- if(NULL == slab_zone){ \
- icp_ocfDrvFreeCaches(); \
- EPRINTK("%s() line %d: Not enough memory!\n", \
- __FUNCTION__, __LINE__); \
- return ENOMEM; \
- } \
-}
-
-#define ICP_CACHE_DESTROY(slab_zone) \
-{ \
- if(NULL != slab_zone){ \
- kmem_cache_destroy(slab_zone); \
- slab_zone = NULL; \
- } \
-}
-
-#define ICP_REGISTER_SYM_FUNCTIONALITY_WITH_OCF(alg) \
-{ \
- if(OCF_REGISTRATION_STATUS_SUCCESS == \
- crypto_register(icp_ocfDrvDriverId, \
- alg, \
- 0, \
- 0)) { \
- ocfStatus++; \
- } \
-}
-
-#define ICP_REGISTER_ASYM_FUNCTIONALITY_WITH_OCF(alg) \
-{ \
- if(OCF_REGISTRATION_STATUS_SUCCESS == \
- crypto_kregister(icp_ocfDrvDriverId, \
- alg, \
- 0)){ \
- ocfStatus++; \
- } \
-}
-
#if ICP_OCF_PRINT_DEBUG_MESSAGES == 1
#define DPRINTK(args...) \
{ \
- printk(args); \
+ ICP_IPRINTK(args); \
}
#else //ICP_OCF_PRINT_DEBUG_MESSAGES == 1
#if ICP_OCF_PRINT_KERN_ALERT == 1
#define APRINTK(args...) \
{ \
- printk(KERN_ALERT args); \
+ ICP_APRINTK(args); \
}
#else //ICP_OCF_PRINT_KERN_ALERT == 1
#if ICP_OCF_PRINT_KERN_ERRS == 1
#define EPRINTK(args...) \
{ \
- printk(KERN_ERR args); \
+ ICP_EPRINTK(args); \
}
#else //ICP_OCF_PRINT_KERN_ERRS == 1
#define IPRINTK(args...) \
{ \
- printk(KERN_INFO args); \
+ ICP_IPRINTK(args); \
}
-/*END OF MACRO DEFINITIONS*/
+/*DSA Prime Q size in bytes (as defined in the standard) */
+#define DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES (20)
+
+#define BITS_TO_BYTES(bytes, bits) \
+ bytes = (bits + NUM_BITS_IN_BYTE_MINUS_ONE) / NUM_BITS_IN_BYTE
typedef enum {
ICP_OCF_DRV_ALG_CIPHER = 0,
ICP_OCF_DRV_ALG_HASH
} icp_ocf_drv_alg_type_t;
-/* These are all defined in icp_common.c */
-extern atomic_t lac_session_failed_dereg_count;
-extern atomic_t icp_ocfDrvIsExiting;
-extern atomic_t num_ocf_to_drv_registered_sessions;
+typedef ICP_LIST_HEAD(icp_drvSessionListHead_s,
+ icp_drvSessionData) icp_drvSessionListHead_t;
-/*These are use inputs used in icp_sym.c and icp_common.c
- They are instantiated in icp_common.c*/
-extern int max_sessions;
+/*Values used to derisk chances of performs being called against
+deregistered sessions (for which the slab page has been reclaimed)
+This is not a fix - since page frames are reclaimed from a slab, one cannot
+rely on that memory not being re-used by another app.*/
+typedef enum {
+ ICP_SESSION_INITIALISED = 0x5C5C5C,
+ ICP_SESSION_RUNNING = 0x005C00,
+ ICP_SESSION_DEREGISTERED = 0xC5C5C5
+} usage_derisk;
+
+/* This struct is required for deferred session
+ deregistration as a work queue function can
+ only have one argument*/
+struct icp_ocfDrvFreeLacSession {
+ CpaCySymSessionCtx sessionToDeregister;
+ icp_workstruct work;
+};
+
+/*
+This is the OCF<->OCF_DRV session object:
+
+1.listNode
+ The first member is a listNode. These session objects are added to a linked
+ list in order to make it easier to remove them all at session exit time.
+
+2.inUse
+ The second member is used to give the session object state and derisk the
+ possibility of OCF batch calls executing against a deregistered session (as
+ described above).
+
+3.sessHandle
+ The third member is a LAC<->OCF_DRV session handle (initialised with the first
+ perform request for that session).
+
+4.lacSessCtx
+ The fourth is the LAC session context. All the parameters for this structure
+ are only known when the first perform request for this session occurs. That is
+ why the OCF EP80579 Driver only registers a new LAC session at perform time
+*/
+struct icp_drvSessionData {
+ ICP_LIST_ENTRY(icp_drvSessionData) listNode;
+ usage_derisk inUse;
+ CpaCySymSessionCtx sessHandle;
+ CpaCySymSessionSetupData lacSessCtx;
+};
+
+/* These are all defined in icp_common.c */
+extern icp_atomic_t lac_session_failed_dereg_count;
+extern icp_atomic_t icp_ocfDrvIsExiting;
+extern icp_atomic_t num_ocf_to_drv_registered_sessions;
extern int32_t icp_ocfDrvDriverId;
-extern struct list_head icp_ocfDrvGlobalSymListHead;
-extern struct list_head icp_ocfDrvGlobalSymListHead_FreeMemList;
-extern struct workqueue_struct *icp_ocfDrvFreeLacSessionWorkQ;
-extern spinlock_t icp_ocfDrvSymSessInfoListSpinlock;
-extern rwlock_t icp_kmem_cache_destroy_alloc_lock;
+
+extern icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead;
+extern icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead_FreeMemList;
+extern icp_workqueue *icp_ocfDrvFreeLacSessionWorkQ;
+extern icp_spinlock_t icp_ocfDrvSymSessInfoListSpinlock;
/*Slab zones for symettric functionality, instantiated in icp_common.c*/
-extern struct kmem_cache *drvSessionData_zone;
-extern struct kmem_cache *drvOpData_zone;
+extern icp_kmem_cache drvSessionData_zone;
+extern icp_kmem_cache drvOpData_zone;
/*Slabs zones for asymettric functionality, instantiated in icp_common.c*/
-extern struct kmem_cache *drvDH_zone;
-extern struct kmem_cache *drvLnModExp_zone;
-extern struct kmem_cache *drvRSADecrypt_zone;
-extern struct kmem_cache *drvRSAPrivateKey_zone;
-extern struct kmem_cache *drvDSARSSign_zone;
-extern struct kmem_cache *drvDSARSSignKValue_zone;
-extern struct kmem_cache *drvDSAVerify_zone;
+extern icp_kmem_cache drvDH_zone;
+extern icp_kmem_cache drvLnModExp_zone;
+extern icp_kmem_cache drvRSADecrypt_zone;
+extern icp_kmem_cache drvRSAPrivateKey_zone;
+extern icp_kmem_cache drvDSARSSign_zone;
+extern icp_kmem_cache drvDSARSSignKValue_zone;
+extern icp_kmem_cache drvDSAVerify_zone;
+
+/* Module parameters defined in icp_cpmmon.c*/
+
+/* Module parameters - gives the number of times LAC deregistration shall be
+ re-tried */
+extern int num_dereg_retries;
+
+/* Module parameter - gives the delay time in jiffies before a LAC session
+ shall be attempted to be deregistered again */
+extern int dereg_retry_delay_in_jiffies;
+
+/* Module parameter - gives the maximum number of sessions possible between
+ OCF and the OCF EP80579 Driver. If set to zero, there is no limit.*/
+extern int max_sessions;
/*Slab zones for flatbuffers and bufferlist*/
-extern struct kmem_cache *drvFlatBuffer_zone;
+extern icp_kmem_cache drvFlatBuffer_zone;
#define ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS (16)
Cpa32U metaOffset;
Cpa32U buffListSize;
};
+
extern struct icp_drvBuffListInfo defBuffListInfo;
-/*
-* This struct is used to keep a reference to the relevant node in the list
-* of sessionData structs, to the buffer type required by OCF and to the OCF
-* provided crp struct that needs to be returned. All this info is needed in
-* the callback function.
-*
-* IV can sometimes be stored in non-contiguous memory (e.g. skbuff
-* linked/frag list, therefore a contiguous memory space for the IV data must be
-* created and passed to LAC
-*
-*/
+/* This struct is used to keep a reference to the relevant node in the list
+ of sessionData structs, to the buffer type required by OCF and to the OCF
+ provided crp struct that needs to be returned. All this info is needed in
+ the callback function.*/
struct icp_drvOpData {
CpaCySymOpData lacOpData;
uint32_t digestSizeInBytes;
CpaFlatBuffer bufferListArray[ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS];
CpaBoolean verifyResult;
};
-/*Values used to derisk chances of performs being called against
-deregistered sessions (for which the slab page has been reclaimed)
-This is not a fix - since page frames are reclaimed from a slab, one cannot
-rely on that memory not being re-used by another app.*/
-typedef enum {
- ICP_SESSION_INITIALISED = 0x5C5C5C,
- ICP_SESSION_RUNNING = 0x005C00,
- ICP_SESSION_DEREGISTERED = 0xC5C5C5
-} usage_derisk;
-
-/*
-This is the OCF<->OCF_DRV session object:
-
-1.The first member is a listNode. These session objects are added to a linked
- list in order to make it easier to remove them all at session exit time.
-2.The second member is used to give the session object state and derisk the
- possibility of OCF batch calls executing against a deregistered session (as
- described above).
-3.The third member is a LAC<->OCF_DRV session handle (initialised with the first
- perform request for that session).
-4.The fourth is the LAC session context. All the parameters for this structure
- are only known when the first perform request for this session occurs. That is
- why the OCF Tolapai Driver only registers a new LAC session at perform time
-*/
-struct icp_drvSessionData {
- struct list_head listNode;
- usage_derisk inUse;
- CpaCySymSessionCtx sessHandle;
- CpaCySymSessionSetupData lacSessCtx;
-};
-/* This struct is required for deferred session
- deregistration as a work queue function can
- only have one argument*/
-struct icp_ocfDrvFreeLacSession {
- CpaCySymSessionCtx sessionToDeregister;
- struct work_struct work;
-};
+/* Create a new session between OCF and this driver*/
+int icp_ocfDrvNewSession(icp_device_t dev, uint32_t * sild,
+ struct cryptoini *cri);
-int icp_ocfDrvNewSession(device_t dev, uint32_t * sild, struct cryptoini *cri);
+/* Free a session between this driver and the Quick Assist Framework*/
+int icp_ocfDrvFreeLACSession(icp_device_t dev, uint64_t sid);
-int icp_ocfDrvFreeLACSession(device_t dev, uint64_t sid);
+/* Defer freeing a Quick Assist session*/
+void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg);
-int icp_ocfDrvSymProcess(device_t dev, struct cryptop *crp, int hint);
+/* Process OCF cryptographic request for a symmetric algorithm*/
+int icp_ocfDrvSymProcess(icp_device_t dev, struct cryptop *crp, int hint);
-int icp_ocfDrvPkeProcess(device_t dev, struct cryptkop *krp, int hint);
+/* Process OCF cryptographic request for an asymmetric algorithm*/
+int icp_ocfDrvPkeProcess(icp_device_t dev, struct cryptkop *krp, int hint);
+/* Populate a buffer with random data*/
int icp_ocfDrvReadRandom(void *arg, uint32_t * buf, int maxwords);
+/* Retry Quick Assist session deregistration*/
int icp_ocfDrvDeregRetry(CpaCySymSessionCtx sessionToDeregister);
-int icp_ocfDrvSkBuffToBufferList(struct sk_buff *skb,
- CpaBufferList * bufferList);
+/* Convert an OS scatter gather list to a CPA buffer list*/
+int icp_ocfDrvPacketBuffToBufferList(icp_packet_buffer_t * pPacketBuffer,
+ CpaBufferList * bufferList);
+
+/* Convert a CPA buffer list to an OS scatter gather list*/
+int icp_ocfDrvBufferListToPacketBuff(CpaBufferList * bufferList,
+ icp_packet_buffer_t ** pPacketBuffer);
-int icp_ocfDrvBufferListToSkBuff(CpaBufferList * bufferList,
- struct sk_buff **skb);
+/* Get the number of buffers in an OS scatter gather list*/
+uint16_t icp_ocfDrvGetPacketBuffFrags(icp_packet_buffer_t * pPacketBuffer);
+/* Convert a single OS buffer to a CPA Flat Buffer*/
+void icp_ocfDrvSinglePacketBuffToFlatBuffer(icp_packet_buffer_t * pPacketBuffer,
+ CpaFlatBuffer * pFlatBuffer);
+
+/* Add pointer and length to a CPA Flat Buffer structure*/
void icp_ocfDrvPtrAndLenToFlatBuffer(void *pData, uint32_t len,
CpaFlatBuffer * pFlatBuffer);
+/* Convert pointer and length values to a CPA buffer list*/
void icp_ocfDrvPtrAndLenToBufferList(void *pDataIn, uint32_t length,
CpaBufferList * pBufferList);
+/* Convert a CPA buffer list to pointer and length values*/
void icp_ocfDrvBufferListToPtrAndLen(CpaBufferList * pBufferList,
void **ppDataOut, uint32_t * pLength);
+/* Set the number of flat buffers in bufferlist and the size of memory
+ to allocate for the pPrivateMetaData member of the CpaBufferList.*/
int icp_ocfDrvBufferListMemInfo(uint16_t numBuffers,
struct icp_drvBuffListInfo *buffListInfo);
-uint16_t icp_ocfDrvGetSkBuffFrags(struct sk_buff *pSkb);
+/* Find pointer position of the digest within an OS scatter gather list*/
+uint8_t *icp_ocfDrvPacketBufferDigestPointerFind(struct icp_drvOpData
+ *drvOpData,
+ int offsetInBytes,
+ uint32_t digestSizeInBytes);
+
+/*This top level function is used to find a pointer to where a digest is
+ stored/needs to be inserted. */
+uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData *drvOpData,
+ struct cryptodesc *crp_desc);
+/* Free a CPA flat buffer*/
void icp_ocfDrvFreeFlatBuffer(CpaFlatBuffer * pFlatBuffer);
-int icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList,
- const struct icp_drvOpData *pOpData);
+/* This function will allocate memory for the pPrivateMetaData
+ member of CpaBufferList. */
+int icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList,
+ struct icp_drvOpData *pOpData);
+/* Free data allocated for the pPrivateMetaData
+ member of CpaBufferList.*/
void icp_ocfDrvFreeMetaData(CpaBufferList * pBufferList);
+#define ICP_CACHE_CREATE(cache_ID, cache_name) \
+ icp_kmem_cache_create(cache_ID, sizeof(cache_name),ICP_KERNEL_CACHE_ALIGN,\
+ ICP_KERNEL_CACHE_NOINIT)
+
+#define ICP_CACHE_FREE(args...) \
+ icp_kmem_cache_free (args)
+
+#define ICP_CACHE_DESTROY(slab_zone)\
+{\
+ if(NULL != slab_zone){\
+ icp_kmem_cache_destroy(slab_zone);\
+ slab_zone = NULL;\
+ }\
+}
+
#endif
-/* ICP_OCF_H */
+/* ICP_OCF_H_ */
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
*
* BSD LICENSE
*
- * Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
- * version: Security.L.1.0.130
+ * version: Security.L.1.0.2-229
*
***************************************************************************/
/*
icp_ocfDrvAlgorithmSetup(struct cryptoini *cri,
CpaCySymSessionSetupData * lacSessCtx);
-/*This top level function is used to find a pointer to where a digest is
- stored/needs to be inserted. */
-static uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData *drvOpData,
- struct cryptodesc *crp_desc);
-
-/*This function is called when a digest pointer has to be found within a
- SKBUFF.*/
-static inline uint8_t *icp_ocfDrvSkbuffDigestPointerFind(struct icp_drvOpData
- *drvOpData,
- int offsetInBytes,
- uint32_t
- digestSizeInBytes);
-
-/*The following two functions are called if the SKBUFF digest pointer is not
- positioned in the linear portion of the buffer (i.e. it is in a linked SKBUFF
- or page fragment).*/
-/*This function takes care of the page fragment case.*/
-static inline uint8_t *icp_ocfDrvDigestSkbNRFragsCheck(struct sk_buff *skb,
- struct skb_shared_info
- *skb_shared,
- int offsetInBytes,
- uint32_t
- digestSizeInBytes);
-
-/*This function takes care of the linked list case.*/
-static inline uint8_t *icp_ocfDrvDigestSkbFragListCheck(struct sk_buff *skb,
- struct skb_shared_info
- *skb_shared,
- int offsetInBytes,
- uint32_t
- digestSizeInBytes);
-
/*This function is used to free an OCF->OCF_DRV session object*/
static void icp_ocfDrvFreeOCFSession(struct icp_drvSessionData *sessionData);
* Notes : The callbackTag is a pointer to an icp_drvOpData. This memory
* object was passed to LAC for the cryptographic processing and contains all
* the relevant information for cleaning up buffer handles etc. so that the
- * OCF Tolapai Driver portion of this crypto operation can be fully completed.
+ * OCF EP80579 Driver portion of this crypto operation can be fully completed.
*/
static void
icp_ocfDrvSymCallBack(void *callbackTag,
if (CPA_STATUS_SUCCESS == status) {
- if (temp_drvOpData->bufferType == CRYPTO_F_SKBUF) {
+ if (temp_drvOpData->bufferType == ICP_CRYPTO_F_PACKET_BUF) {
if (ICP_OCF_DRV_STATUS_SUCCESS !=
- icp_ocfDrvBufferListToSkBuff(pDstBuffer,
- (struct sk_buff **)
- &(crp->crp_buf))) {
+ icp_ocfDrvBufferListToPacketBuff(pDstBuffer,
+ (icp_packet_buffer_t
+ **)
+ & (crp->crp_buf))) {
EPRINTK("%s(): BufferList to SkBuff "
"conversion error.\n", __FUNCTION__);
crp->crp_etype = EPERM;
if (temp_drvOpData->numBufferListArray >
ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) {
- kfree(pDstBuffer->pBuffers);
+ icp_kfree(pDstBuffer->pBuffers);
}
icp_ocfDrvFreeMetaData(pDstBuffer);
- kmem_cache_free(drvOpData_zone, temp_drvOpData);
+ ICP_CACHE_FREE(drvOpData_zone, temp_drvOpData);
/* Invoke the OCF callback function */
crypto_done(crp);
* Notes : LAC session registration happens during the first perform call.
* That is the first time we know all information about a given session.
*/
-int icp_ocfDrvNewSession(device_t dev, uint32_t * sid, struct cryptoini *cri)
+int icp_ocfDrvNewSession(icp_device_t dev, uint32_t * sid,
+ struct cryptoini *cri)
{
struct icp_drvSessionData *sessionData = NULL;
uint32_t delete_session = 0;
return EINVAL;
}
- sessionData = kmem_cache_zalloc(drvSessionData_zone, GFP_ATOMIC);
+ sessionData = icp_kmem_cache_zalloc(drvSessionData_zone, ICP_M_NOWAIT);
if (NULL == sessionData) {
DPRINTK("%s():No memory for Session Data\n", __FUNCTION__);
return ENOMEM;
}
/*ENTER CRITICAL SECTION */
- spin_lock_bh(&icp_ocfDrvSymSessInfoListSpinlock);
+ icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock);
/*put this check in the spinlock so no new sessions can be added to the
linked list when we are exiting */
- if (CPA_TRUE == atomic_read(&icp_ocfDrvIsExiting)) {
+ if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) {
delete_session++;
} else if (NO_OCF_TO_DRV_MAX_SESSIONS != max_sessions) {
- if (atomic_read(&num_ocf_to_drv_registered_sessions) >=
+ if (icp_atomic_read(&num_ocf_to_drv_registered_sessions) >=
(max_sessions -
- atomic_read(&lac_session_failed_dereg_count))) {
+ icp_atomic_read(&lac_session_failed_dereg_count))) {
delete_session++;
} else {
- atomic_inc(&num_ocf_to_drv_registered_sessions);
+ icp_atomic_inc(&num_ocf_to_drv_registered_sessions);
/* Add to session data linked list */
- list_add(&(sessionData->listNode),
- &icp_ocfDrvGlobalSymListHead);
+ ICP_LIST_ADD(sessionData, &icp_ocfDrvGlobalSymListHead,
+ listNode);
}
} else if (NO_OCF_TO_DRV_MAX_SESSIONS == max_sessions) {
- list_add(&(sessionData->listNode),
- &icp_ocfDrvGlobalSymListHead);
+ ICP_LIST_ADD(sessionData, &icp_ocfDrvGlobalSymListHead,
+ listNode);
}
sessionData->inUse = ICP_SESSION_INITIALISED;
/*EXIT CRITICAL SECTION */
- spin_unlock_bh(&icp_ocfDrvSymSessInfoListSpinlock);
+ icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock);
if (delete_session) {
DPRINTK("%s():No Session handles available\n", __FUNCTION__);
- kmem_cache_free(drvSessionData_zone, sessionData);
+ ICP_CACHE_FREE(drvSessionData_zone, sessionData);
return EPERM;
}
sessionData->inUse = ICP_SESSION_DEREGISTERED;
/*ENTER CRITICAL SECTION */
- spin_lock_bh(&icp_ocfDrvSymSessInfoListSpinlock);
+ icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock);
- if (CPA_TRUE == atomic_read(&icp_ocfDrvIsExiting)) {
+ if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) {
/*If the Driver is exiting, allow that process to
handle any deletions */
/*EXIT CRITICAL SECTION */
- spin_unlock_bh(&icp_ocfDrvSymSessInfoListSpinlock);
+ icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock);
return;
}
- atomic_dec(&num_ocf_to_drv_registered_sessions);
+ icp_atomic_dec(&num_ocf_to_drv_registered_sessions);
- list_del(&(sessionData->listNode));
+ ICP_LIST_DEL(sessionData, listNode);
/*EXIT CRITICAL SECTION */
- spin_unlock_bh(&icp_ocfDrvSymSessInfoListSpinlock);
+ icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock);
if (NULL != sessionData->sessHandle) {
- kfree(sessionData->sessHandle);
+ icp_kfree(sessionData->sessHandle);
}
- kmem_cache_free(drvSessionData_zone, sessionData);
+ ICP_CACHE_FREE(drvSessionData_zone, sessionData);
}
/* Name : icp_ocfDrvFreeLACSession
* Description : This attempts to deregister a LAC session. If it fails, the
* deregistation retry function is called.
*/
-int icp_ocfDrvFreeLACSession(device_t dev, uint64_t sid)
+int icp_ocfDrvFreeLACSession(icp_device_t dev, uint64_t sid)
{
CpaCySymSessionCtx sessionToDeregister = NULL;
struct icp_drvSessionData *sessionData = NULL;
sessionToDeregister = sessionData->sessHandle;
- if (ICP_SESSION_INITIALISED == sessionData->inUse) {
- DPRINTK("%s() Session not registered with LAC\n", __FUNCTION__);
- } else if (NULL == sessionData->sessHandle) {
- EPRINTK
- ("%s(): OCF Free session called with Null Session Handle.\n",
- __FUNCTION__);
+ if ((ICP_SESSION_INITIALISED != sessionData->inUse) &&
+ (ICP_SESSION_RUNNING != sessionData->inUse) &&
+ (ICP_SESSION_DEREGISTERED != sessionData->inUse)) {
+ DPRINTK("%s() Session not initialised.\n", __FUNCTION__);
return EINVAL;
- } else {
+ }
+
+ if (ICP_SESSION_RUNNING == sessionData->inUse) {
lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE,
sessionToDeregister);
if (CPA_STATUS_RETRY == lacStatus) {
DPRINTK("%s(): LAC failed to deregister the session. "
"localSessionId= %p, lacStatus = %d\n",
__FUNCTION__, sessionToDeregister, lacStatus);
- atomic_inc(&lac_session_failed_dereg_count);
+ icp_atomic_inc(&lac_session_failed_dereg_count);
retval = EPERM;
}
+ } else {
+ DPRINTK("%s() Session not registered with LAC.\n",
+ __FUNCTION__);
}
icp_ocfDrvFreeOCFSession(sessionData);
* to whether session paramaters have changed (e.g. alg chain order) are
* done.
*/
-int icp_ocfDrvSymProcess(device_t dev, struct cryptop *crp, int hint)
+int icp_ocfDrvSymProcess(icp_device_t dev, struct cryptop *crp, int hint)
{
struct icp_drvSessionData *sessionData = NULL;
struct icp_drvOpData *drvOpData = NULL;
CpaStatus lacStatus = CPA_STATUS_SUCCESS;
Cpa32U sessionCtxSizeInBytes = 0;
- uint16_t numBufferListArray = 0;
if (NULL == crp) {
DPRINTK("%s(): Invalid input parameters, cryptop is NULL\n",
return EINVAL;
}
- if (CPA_TRUE == atomic_read(&icp_ocfDrvIsExiting)) {
+ if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) {
crp->crp_etype = EFAULT;
return EFAULT;
}
if (CPA_STATUS_SUCCESS != lacStatus) {
EPRINTK("%s(): cpaCySymSessionCtxGetSize failed - %d\n",
__FUNCTION__, lacStatus);
+ crp->crp_etype = EINVAL;
return EINVAL;
}
sessionData->sessHandle =
- kmalloc(sessionCtxSizeInBytes, GFP_ATOMIC);
+ icp_kmalloc(sessionCtxSizeInBytes, ICP_M_NOWAIT);
if (NULL == sessionData->sessHandle) {
EPRINTK
("%s(): Failed to get memory for SymSessionCtx\n",
__FUNCTION__);
+ crp->crp_etype = ENOMEM;
return ENOMEM;
}
if (CPA_STATUS_SUCCESS != lacStatus) {
EPRINTK("%s(): cpaCySymInitSession failed -%d \n",
__FUNCTION__, lacStatus);
+ crp->crp_etype = EFAULT;
return EFAULT;
}
sessionData->inUse = ICP_SESSION_RUNNING;
}
- drvOpData = kmem_cache_zalloc(drvOpData_zone, GFP_ATOMIC);
+ drvOpData = icp_kmem_cache_zalloc(drvOpData_zone, ICP_M_NOWAIT);
if (NULL == drvOpData) {
EPRINTK("%s():Failed to get memory for drvOpData\n",
__FUNCTION__);
drvOpData->srcBuffer.pBuffers = drvOpData->bufferListArray;
drvOpData->numBufferListArray = ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS;
+ if (ICP_OCF_DRV_STATUS_SUCCESS !=
+ icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp->crp_desc)) {
+ crp->crp_etype = EINVAL;
+ goto err;
+ }
+
+ if (drvOpData->crp->crp_desc->crd_next != NULL) {
+ if (icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp->
+ crp_desc->crd_next)) {
+ crp->crp_etype = EINVAL;
+ goto err;
+ }
+
+ }
+
/*
- * Allocate buffer list array memory allocation if the
- * data fragment is more than the default allocation
+ * Allocate buffer list array memory if the data fragment is more than
+ * the default number (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) and not
+ * calculated already
*/
- if (crp->crp_flags & CRYPTO_F_SKBUF) {
- numBufferListArray = icp_ocfDrvGetSkBuffFrags((struct sk_buff *)
- crp->crp_buf);
- if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS < numBufferListArray) {
+ if (crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) {
+ if (NULL == drvOpData->lacOpData.pDigestResult) {
+ drvOpData->numBufferListArray =
+ icp_ocfDrvGetPacketBuffFrags((icp_packet_buffer_t *)
+ crp->crp_buf);
+ }
+
+ if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS <
+ drvOpData->numBufferListArray) {
DPRINTK("%s() numBufferListArray more than default\n",
__FUNCTION__);
drvOpData->srcBuffer.pBuffers = NULL;
drvOpData->srcBuffer.pBuffers =
- kmalloc(numBufferListArray *
- sizeof(CpaFlatBuffer), GFP_ATOMIC);
+ icp_kmalloc(drvOpData->numBufferListArray *
+ sizeof(CpaFlatBuffer), ICP_M_NOWAIT);
if (NULL == drvOpData->srcBuffer.pBuffers) {
EPRINTK("%s() Failed to get memory for "
"pBuffers\n", __FUNCTION__);
- kmem_cache_free(drvOpData_zone, drvOpData);
+ ICP_CACHE_FREE(drvOpData_zone, drvOpData);
crp->crp_etype = ENOMEM;
return ENOMEM;
}
- drvOpData->numBufferListArray = numBufferListArray;
}
}
* Check the type of buffer structure we got and convert it into
* CpaBufferList format.
*/
- if (crp->crp_flags & CRYPTO_F_SKBUF) {
+ if (crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) {
if (ICP_OCF_DRV_STATUS_SUCCESS !=
- icp_ocfDrvSkBuffToBufferList((struct sk_buff *)crp->crp_buf,
- &(drvOpData->srcBuffer))) {
- EPRINTK("%s():Failed to translate from SK_BUF "
+ icp_ocfDrvPacketBuffToBufferList((icp_packet_buffer_t *)
+ crp->crp_buf,
+ &(drvOpData->srcBuffer))) {
+ EPRINTK("%s():Failed to translate from packet buffer "
"to bufferlist\n", __FUNCTION__);
crp->crp_etype = EINVAL;
goto err;
}
- drvOpData->bufferType = CRYPTO_F_SKBUF;
+ drvOpData->bufferType = ICP_CRYPTO_F_PACKET_BUF;
} else if (crp->crp_flags & CRYPTO_F_IOV) {
/* OCF only supports IOV of one entry. */
if (NUM_IOV_SUPPORTED ==
drvOpData->bufferType = CRYPTO_BUF_CONTIG;
}
- if (ICP_OCF_DRV_STATUS_SUCCESS !=
- icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp->crp_desc)) {
- crp->crp_etype = EINVAL;
- goto err;
- }
-
- if (drvOpData->crp->crp_desc->crd_next != NULL) {
- if (icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp->
- crp_desc->crd_next)) {
- crp->crp_etype = EINVAL;
- goto err;
- }
-
- }
-
/* Allocate srcBuffer's private meta data */
if (ICP_OCF_DRV_STATUS_SUCCESS !=
icp_ocfDrvAllocMetaData(&(drvOpData->srcBuffer), drvOpData)) {
DPRINTK("%s(): cpaCySymPerformOp retry, lacStatus = %d\n",
__FUNCTION__, lacStatus);
memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData));
- crp->crp_etype = EINVAL;
+ crp->crp_etype = ERESTART;
goto err;
}
if (CPA_STATUS_SUCCESS != lacStatus) {
err:
if (drvOpData->numBufferListArray > ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) {
- kfree(drvOpData->srcBuffer.pBuffers);
+ icp_kfree(drvOpData->srcBuffer.pBuffers);
}
icp_ocfDrvFreeMetaData(&(drvOpData->srcBuffer));
- kmem_cache_free(drvOpData_zone, drvOpData);
+ ICP_CACHE_FREE(drvOpData_zone, drvOpData);
return crp->crp_etype;
}
* must be traversed by the data length offset in order to find the digest start
* address. Whether there is enough space for the digest must also be checked.
*/
-
-static uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData *drvOpData,
- struct cryptodesc *crp_desc)
+uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData * drvOpData,
+ struct cryptodesc * crp_desc)
{
int offsetInBytes = crp_desc->crd_inject;
uint32_t digestSizeInBytes = drvOpData->digestSizeInBytes;
uint8_t *flat_buffer_base = NULL;
int flat_buffer_length = 0;
- struct sk_buff *skb;
- if (drvOpData->crp->crp_flags & CRYPTO_F_SKBUF) {
- /*check if enough overall space to store hash */
- skb = (struct sk_buff *)(drvOpData->crp->crp_buf);
-
- if (skb->len < (offsetInBytes + digestSizeInBytes)) {
- DPRINTK("%s() Not enough space for Digest"
- " payload after the offset (%d), "
- "digest size (%d) \n", __FUNCTION__,
- offsetInBytes, digestSizeInBytes);
- return NULL;
- }
+ if (drvOpData->crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) {
- return icp_ocfDrvSkbuffDigestPointerFind(drvOpData,
- offsetInBytes,
- digestSizeInBytes);
+ return icp_ocfDrvPacketBufferDigestPointerFind(drvOpData,
+ offsetInBytes,
+ digestSizeInBytes);
} else {
/* IOV or flat buffer */
DPRINTK("%s() Should not reach this point\n", __FUNCTION__);
return NULL;
}
-
-/* Name : icp_ocfDrvSkbuffDigestPointerFind
- *
- * Description : This function is used by icp_ocfDrvDigestPointerFind to process
- * the non-linear portion of the skbuff if the fragmentation type is a linked
- * list (frag_list is not NULL in the skb_shared_info structure)
- */
-static inline uint8_t *icp_ocfDrvSkbuffDigestPointerFind(struct icp_drvOpData
- *drvOpData,
- int offsetInBytes,
- uint32_t
- digestSizeInBytes)
-{
-
- struct sk_buff *skb = NULL;
- struct skb_shared_info *skb_shared = NULL;
-
- uint32_t skbuffisnonlinear = 0;
-
- uint32_t skbheadlen = 0;
-
- skb = (struct sk_buff *)(drvOpData->crp->crp_buf);
- skbuffisnonlinear = skb_is_nonlinear(skb);
-
- skbheadlen = skb_headlen(skb);
-
- /*Linear skb checks */
- if (skbheadlen > offsetInBytes) {
-
- if (skbheadlen >= (offsetInBytes + digestSizeInBytes)) {
- return (uint8_t *) (skb->data + offsetInBytes);
- } else {
- DPRINTK("%s() Auth payload stretches "
- "accross contiguous memory\n", __FUNCTION__);
- return NULL;
- }
- } else {
- if (skbuffisnonlinear) {
- offsetInBytes -= skbheadlen;
- } else {
- DPRINTK("%s() Offset outside of buffer boundaries\n",
- __FUNCTION__);
- return NULL;
- }
- }
-
- /*Non Linear checks */
- skb_shared = (struct skb_shared_info *)(skb->end);
- if (unlikely(NULL == skb_shared)) {
- DPRINTK("%s() skbuff shared info stucture is NULL! \n",
- __FUNCTION__);
- return NULL;
- } else if ((0 != skb_shared->nr_frags) &&
- (skb_shared->frag_list != NULL)) {
- DPRINTK("%s() skbuff nr_frags AND "
- "frag_list not supported \n", __FUNCTION__);
- return NULL;
- }
-
- /*TCP segmentation more likely than IP fragmentation */
- if (likely(0 != skb_shared->nr_frags)) {
- return icp_ocfDrvDigestSkbNRFragsCheck(skb, skb_shared,
- offsetInBytes,
- digestSizeInBytes);
- } else if (skb_shared->frag_list != NULL) {
- return icp_ocfDrvDigestSkbFragListCheck(skb, skb_shared,
- offsetInBytes,
- digestSizeInBytes);
- } else {
- DPRINTK("%s() skbuff is non-linear but does not show any "
- "linked data\n", __FUNCTION__);
- return NULL;
- }
-
-}
-
-/* Name : icp_ocfDrvDigestSkbNRFragsCheck
- *
- * Description : This function is used by icp_ocfDrvSkbuffDigestPointerFind to
- * process the non-linear portion of the skbuff, if the fragmentation type is
- * page fragments
- */
-static inline uint8_t *icp_ocfDrvDigestSkbNRFragsCheck(struct sk_buff *skb,
- struct skb_shared_info
- *skb_shared,
- int offsetInBytes,
- uint32_t
- digestSizeInBytes)
-{
- int i = 0;
- /*nr_frags starts from 1 */
- if (MAX_SKB_FRAGS < skb_shared->nr_frags) {
- DPRINTK("%s error processing skbuff "
- "page frame -- MAX FRAGS exceeded \n", __FUNCTION__);
- return NULL;
- }
-
- for (i = 0; i < skb_shared->nr_frags; i++) {
-
- if (offsetInBytes >= skb_shared->frags[i].size) {
- /*offset still greater than data position */
- offsetInBytes -= skb_shared->frags[i].size;
- } else {
- /* found the page containing start of hash */
-
- if (NULL == skb_shared->frags[i].page) {
- DPRINTK("%s() Linked page is NULL!\n",
- __FUNCTION__);
- return NULL;
- }
-
- if (offsetInBytes + digestSizeInBytes >
- skb_shared->frags[i].size) {
- DPRINTK("%s() Auth payload stretches accross "
- "contiguous memory\n", __FUNCTION__);
- return NULL;
- } else {
- return (uint8_t *) (skb_shared->frags[i].page +
- skb_shared->frags[i].
- page_offset +
- offsetInBytes);
- }
- }
- /*only possible if internal page sizes are set wrong */
- if (offsetInBytes < 0) {
- DPRINTK("%s error processing skbuff page frame "
- "-- offset calculation \n", __FUNCTION__);
- return NULL;
- }
- }
- /*only possible if internal page sizes are set wrong */
- DPRINTK("%s error processing skbuff page frame "
- "-- ran out of page fragments, remaining offset = %d \n",
- __FUNCTION__, offsetInBytes);
- return NULL;
-
-}
-
-/* Name : icp_ocfDrvDigestSkbFragListCheck
- *
- * Description : This function is used by icp_ocfDrvSkbuffDigestPointerFind to
- * process the non-linear portion of the skbuff, if the fragmentation type is
- * a linked list
- *
- */
-static inline uint8_t *icp_ocfDrvDigestSkbFragListCheck(struct sk_buff *skb,
- struct skb_shared_info
- *skb_shared,
- int offsetInBytes,
- uint32_t
- digestSizeInBytes)
-{
-
- struct sk_buff *skb_list = skb_shared->frag_list;
- /*check added for readability */
- if (NULL == skb_list) {
- DPRINTK("%s error processing skbuff "
- "-- no more list! \n", __FUNCTION__);
- return NULL;
- }
-
- for (; skb_list; skb_list = skb_list->next) {
- if (NULL == skb_list) {
- DPRINTK("%s error processing skbuff "
- "-- no more list! \n", __FUNCTION__);
- return NULL;
- }
-
- if (offsetInBytes >= skb_list->len) {
- offsetInBytes -= skb_list->len;
-
- } else {
- if (offsetInBytes + digestSizeInBytes > skb_list->len) {
- DPRINTK("%s() Auth payload stretches accross "
- "contiguous memory\n", __FUNCTION__);
- return NULL;
- } else {
- return (uint8_t *)
- (skb_list->data + offsetInBytes);
- }
-
- }
-
- /*This check is only needed if internal skb_list length values
- are set wrong. */
- if (0 > offsetInBytes) {
- DPRINTK("%s() error processing skbuff object -- offset "
- "calculation \n", __FUNCTION__);
- return NULL;
- }
-
- }
-
- /*catch all for unusual for-loop exit.
- This code should never be reached */
- DPRINTK("%s() Catch-All hit! Process error.\n", __FUNCTION__);
- return NULL;
-}
+++ /dev/null
-###################
-# @par
-# This file is provided under a dual BSD/GPLv2 license. When using or
-# redistributing this file, you may do so under either license.
-#
-# GPL LICENSE SUMMARY
-#
-# Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of version 2 of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-# The full GNU General Public License is included in this distribution
-# in the file called LICENSE.GPL.
-#
-# Contact Information:
-# Intel Corporation
-#
-# BSD LICENSE
-#
-# Copyright(c) 2007,2008 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-#
-# version: Security.L.1.0.130
-###################
-
-#specific include directories in kernel space
-INCLUDES+=#e.g. -I$(OSAL_DIR)/include \
-
-#Extra Flags Specific in kernel space e.g. include path or debug flags etc. e.g to add an include path EXTRA_CFLAGS += -I$(src)/../include
-EXTRA_CFLAGS += $(INCLUDES) -O2 -Wall
-EXTRA_LDFLAGS +=-whole-archive
-
module_param(hifn_maxbatch, int, 0644);
MODULE_PARM_DESC(hifn_maxbatch, "max ops to batch w/o interrupt");
+int hifn_cache_linesize = 0x10;
+module_param(hifn_cache_linesize, int, 0444);
+MODULE_PARM_DESC(hifn_cache_linesize, "PCI config cache line size");
+
#ifdef MODULE_PARM
char *hifn_pllconfig = NULL;
MODULE_PARM(hifn_pllconfig, "s");
/* NB: RETRY only responds to 8-bit reads/writes */
pci_write_config_byte(sc->sc_pcidev, HIFN_RETRY_TIMEOUT, 0);
pci_write_config_dword(sc->sc_pcidev, HIFN_TRDY_TIMEOUT, 0);
+ /* piggy back the cache line setting here */
+ pci_write_config_byte(sc->sc_pcidev, PCI_CACHE_LINE_SIZE, hifn_cache_linesize);
}
/*
module_exit(hifn_exit);
MODULE_LICENSE("BSD");
-MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
MODULE_DESCRIPTION("OCF driver for hifn PCI crypto devices");
* This driver requires the IXP400 Access Library that is available
* from Intel in order to operate (or compile).
*
- * Written by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2006-2007 David McCullough
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
* Copyright (C) 2004-2005 Intel Corporation.
*
* LICENSE TERMS
ixCryptoAccCtxUnregister(ixp_sessions[sid]->ixp_ctx_id);
ixp_sessions[sid]->ixp_ctx_id = -1;
}
-
- flush_scheduled_work();
-
kfree(ixp_sessions[sid]);
}
ixp_sessions[sid] = NULL;
static void
ixp_process_pending_wq(struct work_struct *work)
{
- struct ixp_data *ixp = container_of(work, struct ixp_data,
- ixp_pending_work);
+ struct ixp_data *ixp = container_of(work, struct ixp_data, ixp_pending_work);
ixp_process_pending(ixp);
}
#endif
--- /dev/null
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_KIRKWOOD) += mv_cesa.o
+
+mv_cesa-y := cesa/mvCesa.o cesa/mvLru.o cesa/mvMD5.o cesa/mvSHA1.o cesa/AES/mvAesAlg.o cesa/AES/mvAesApi.o cesa/mvCesaDebug.o cesa_ocf_drv.o
+
+# Extra objects required by the CESA driver
+mv_cesa-y += mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.o mvHal/kw_family/boardEnv/mvBoardEnvLib.o mvHal/mv_hal/twsi/mvTwsi.o mvHal/kw_family/ctrlEnv/sys/mvCpuIf.o mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.o mvHal/kw_family/ctrlEnv/sys/mvSysDram.o mvHal/linux_oss/mvOs.o mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.o mvHal/mv_hal/gpp/mvGpp.o mvHal/kw_family/ctrlEnv/sys/mvSysPex.o mvHal/mv_hal/pex/mvPex.o mvHal/kw_family/boardEnv/mvBoardEnvSpec.o mvHal/common/mvCommon.o mvHal/common/mvDebug.o mvHal/kw_family/ctrlEnv/sys/mvSysCesa.o
+
+ifdef src
+EXTRA_CFLAGS += -I$(src)/.. -I$(src)/cesa -I$(src)/mvHal -I$(src)/mvHal/common -I$(src)/mvHal/kw_family -I$(src)/mvHal/mv_hal -I$(src)/mvHal/linux_oss -I$(src)
+endif
+
+EXTRA_CFLAGS += -DMV_LINUX -DMV_CPU_LE -DMV_ARM -DMV_INCLUDE_CESA -DMV_INCLUDE_PEX -DMV_CACHE_COHERENCY=3
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
--- /dev/null
+/* mvAes.h v2.0 August '99
+ * Reference ANSI C code
+ */
+
+/* AES Cipher header file for ANSI C Submissions
+ Lawrence E. Bassham III
+ Computer Security Division
+ National Institute of Standards and Technology
+
+ April 15, 1998
+
+ This sample is to assist implementers developing to the Cryptographic
+API Profile for AES Candidate Algorithm Submissions. Please consult this
+document as a cross-reference.
+
+ ANY CHANGES, WHERE APPROPRIATE, TO INFORMATION PROVIDED IN THIS FILE
+MUST BE DOCUMENTED. CHANGES ARE ONLY APPROPRIATE WHERE SPECIFIED WITH
+THE STRING "CHANGE POSSIBLE". FUNCTION CALLS AND THEIR PARAMETERS CANNOT
+BE CHANGED. STRUCTURES CAN BE ALTERED TO ALLOW IMPLEMENTERS TO INCLUDE
+IMPLEMENTATION SPECIFIC INFORMATION.
+*/
+
+/* Includes:
+ Standard include files
+*/
+
+#include "mvOs.h"
+
+
+/* Error Codes - CHANGE POSSIBLE: inclusion of additional error codes */
+
+/* Key direction is invalid, e.g., unknown value */
+#define AES_BAD_KEY_DIR -1
+
+/* Key material not of correct length */
+#define AES_BAD_KEY_MAT -2
+
+/* Key passed is not valid */
+#define AES_BAD_KEY_INSTANCE -3
+
+/* Params struct passed to cipherInit invalid */
+#define AES_BAD_CIPHER_MODE -4
+
+/* Cipher in wrong state (e.g., not initialized) */
+#define AES_BAD_CIPHER_STATE -5
+
+#define AES_BAD_CIPHER_INSTANCE -7
+
+
+/* Function protoypes */
+/* CHANGED: makeKey(): parameter blockLen added
+ this parameter is absolutely necessary if you want to
+ setup the round keys in a variable block length setting
+ cipherInit(): parameter blockLen added (for obvious reasons)
+ */
+int aesMakeKey(MV_U8 *expandedKey, MV_U8 *keyMaterial, int keyLen, int blockLen);
+int aesBlockEncrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int keyLen,
+ MV_U32 *plain, int numBlocks, MV_U32 *cipher);
+int aesBlockDecrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int keyLen,
+ MV_U32 *plain, int numBlocks, MV_U32 *cipher);
+
+
--- /dev/null
+/* rijndael-alg-ref.c v2.0 August '99
+ * Reference ANSI C code
+ * authors: Paulo Barreto
+ * Vincent Rijmen, K.U.Leuven
+ *
+ * This code is placed in the public domain.
+ */
+
+#include "mvOs.h"
+
+#include "mvAesAlg.h"
+
+#include "mvAesBoxes.dat"
+
+
+MV_U8 mul1(MV_U8 aa, MV_U8 bb);
+void KeyAddition(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC], MV_U8 BC);
+void ShiftRow128Enc(MV_U8 a[4][MAXBC]);
+void ShiftRow128Dec(MV_U8 a[4][MAXBC]);
+void Substitution(MV_U8 a[4][MAXBC], MV_U8 box[256]);
+void MixColumn(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC]);
+void InvMixColumn(MV_U8 a[4][MAXBC]);
+
+
+#define mul(aa, bb) (mask[bb] & Alogtable[aa + Logtable[bb]])
+
+MV_U8 mul1(MV_U8 aa, MV_U8 bb)
+{
+ return mask[bb] & Alogtable[aa + Logtable[bb]];
+}
+
+
+void KeyAddition(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC], MV_U8 BC)
+{
+ /* Exor corresponding text input and round key input bytes
+ */
+ ((MV_U32*)(&(a[0][0])))[0] ^= ((MV_U32*)(&(rk[0][0])))[0];
+ ((MV_U32*)(&(a[1][0])))[0] ^= ((MV_U32*)(&(rk[1][0])))[0];
+ ((MV_U32*)(&(a[2][0])))[0] ^= ((MV_U32*)(&(rk[2][0])))[0];
+ ((MV_U32*)(&(a[3][0])))[0] ^= ((MV_U32*)(&(rk[3][0])))[0];
+
+}
+
+void ShiftRow128Enc(MV_U8 a[4][MAXBC]) {
+ /* Row 0 remains unchanged
+ * The other three rows are shifted a variable amount
+ */
+ MV_U8 tmp[MAXBC];
+
+ tmp[0] = a[1][1];
+ tmp[1] = a[1][2];
+ tmp[2] = a[1][3];
+ tmp[3] = a[1][0];
+
+ ((MV_U32*)(&(a[1][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+ /*
+ a[1][0] = tmp[0];
+ a[1][1] = tmp[1];
+ a[1][2] = tmp[2];
+ a[1][3] = tmp[3];
+ */
+ tmp[0] = a[2][2];
+ tmp[1] = a[2][3];
+ tmp[2] = a[2][0];
+ tmp[3] = a[2][1];
+
+ ((MV_U32*)(&(a[2][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+ /*
+ a[2][0] = tmp[0];
+ a[2][1] = tmp[1];
+ a[2][2] = tmp[2];
+ a[2][3] = tmp[3];
+ */
+ tmp[0] = a[3][3];
+ tmp[1] = a[3][0];
+ tmp[2] = a[3][1];
+ tmp[3] = a[3][2];
+
+ ((MV_U32*)(&(a[3][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+ /*
+ a[3][0] = tmp[0];
+ a[3][1] = tmp[1];
+ a[3][2] = tmp[2];
+ a[3][3] = tmp[3];
+ */
+}
+
+void ShiftRow128Dec(MV_U8 a[4][MAXBC]) {
+ /* Row 0 remains unchanged
+ * The other three rows are shifted a variable amount
+ */
+ MV_U8 tmp[MAXBC];
+
+ tmp[0] = a[1][3];
+ tmp[1] = a[1][0];
+ tmp[2] = a[1][1];
+ tmp[3] = a[1][2];
+
+ ((MV_U32*)(&(a[1][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+ /*
+ a[1][0] = tmp[0];
+ a[1][1] = tmp[1];
+ a[1][2] = tmp[2];
+ a[1][3] = tmp[3];
+ */
+
+ tmp[0] = a[2][2];
+ tmp[1] = a[2][3];
+ tmp[2] = a[2][0];
+ tmp[3] = a[2][1];
+
+ ((MV_U32*)(&(a[2][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+ /*
+ a[2][0] = tmp[0];
+ a[2][1] = tmp[1];
+ a[2][2] = tmp[2];
+ a[2][3] = tmp[3];
+ */
+
+ tmp[0] = a[3][1];
+ tmp[1] = a[3][2];
+ tmp[2] = a[3][3];
+ tmp[3] = a[3][0];
+
+ ((MV_U32*)(&(a[3][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+ /*
+ a[3][0] = tmp[0];
+ a[3][1] = tmp[1];
+ a[3][2] = tmp[2];
+ a[3][3] = tmp[3];
+ */
+}
+
+void Substitution(MV_U8 a[4][MAXBC], MV_U8 box[256]) {
+ /* Replace every byte of the input by the byte at that place
+ * in the nonlinear S-box
+ */
+ int i, j;
+
+ for(i = 0; i < 4; i++)
+ for(j = 0; j < 4; j++) a[i][j] = box[a[i][j]] ;
+}
+
+void MixColumn(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC]) {
+ /* Mix the four bytes of every column in a linear way
+ */
+ MV_U8 b[4][MAXBC];
+ int i, j;
+
+ for(j = 0; j < 4; j++){
+ b[0][j] = mul(25,a[0][j]) ^ mul(1,a[1][j]) ^ a[2][j] ^ a[3][j];
+ b[1][j] = mul(25,a[1][j]) ^ mul(1,a[2][j]) ^ a[3][j] ^ a[0][j];
+ b[2][j] = mul(25,a[2][j]) ^ mul(1,a[3][j]) ^ a[0][j] ^ a[1][j];
+ b[3][j] = mul(25,a[3][j]) ^ mul(1,a[0][j]) ^ a[1][j] ^ a[2][j];
+ }
+ for(i = 0; i < 4; i++)
+ /*for(j = 0; j < BC; j++) a[i][j] = b[i][j];*/
+ ((MV_U32*)(&(a[i][0])))[0] = ((MV_U32*)(&(b[i][0])))[0] ^ ((MV_U32*)(&(rk[i][0])))[0];;
+}
+
+void InvMixColumn(MV_U8 a[4][MAXBC]) {
+ /* Mix the four bytes of every column in a linear way
+ * This is the opposite operation of Mixcolumn
+ */
+ MV_U8 b[4][MAXBC];
+ int i, j;
+
+ for(j = 0; j < 4; j++){
+ b[0][j] = mul(223,a[0][j]) ^ mul(104,a[1][j]) ^ mul(238,a[2][j]) ^ mul(199,a[3][j]);
+ b[1][j] = mul(223,a[1][j]) ^ mul(104,a[2][j]) ^ mul(238,a[3][j]) ^ mul(199,a[0][j]);
+ b[2][j] = mul(223,a[2][j]) ^ mul(104,a[3][j]) ^ mul(238,a[0][j]) ^ mul(199,a[1][j]);
+ b[3][j] = mul(223,a[3][j]) ^ mul(104,a[0][j]) ^ mul(238,a[1][j]) ^ mul(199,a[2][j]);
+ }
+ for(i = 0; i < 4; i++)
+ /*for(j = 0; j < BC; j++) a[i][j] = b[i][j];*/
+ ((MV_U32*)(&(a[i][0])))[0] = ((MV_U32*)(&(b[i][0])))[0];
+}
+
+int rijndaelKeySched (MV_U8 k[4][MAXKC], int keyBits, int blockBits, MV_U8 W[MAXROUNDS+1][4][MAXBC])
+{
+ /* Calculate the necessary round keys
+ * The number of calculations depends on keyBits and blockBits
+ */
+ int KC, BC, ROUNDS;
+ int i, j, t, rconpointer = 0;
+ MV_U8 tk[4][MAXKC];
+
+ switch (keyBits) {
+ case 128: KC = 4; break;
+ case 192: KC = 6; break;
+ case 256: KC = 8; break;
+ default : return (-1);
+ }
+
+ switch (blockBits) {
+ case 128: BC = 4; break;
+ case 192: BC = 6; break;
+ case 256: BC = 8; break;
+ default : return (-2);
+ }
+
+ switch (keyBits >= blockBits ? keyBits : blockBits) {
+ case 128: ROUNDS = 10; break;
+ case 192: ROUNDS = 12; break;
+ case 256: ROUNDS = 14; break;
+ default : return (-3); /* this cannot happen */
+ }
+
+
+ for(j = 0; j < KC; j++)
+ for(i = 0; i < 4; i++)
+ tk[i][j] = k[i][j];
+ t = 0;
+ /* copy values into round key array */
+ for(j = 0; (j < KC) && (t < (ROUNDS+1)*BC); j++, t++)
+ for(i = 0; i < 4; i++) W[t / BC][i][t % BC] = tk[i][j];
+
+ while (t < (ROUNDS+1)*BC) { /* while not enough round key material calculated */
+ /* calculate new values */
+ for(i = 0; i < 4; i++)
+ tk[i][0] ^= S[tk[(i+1)%4][KC-1]];
+ tk[0][0] ^= rcon[rconpointer++];
+
+ if (KC != 8)
+ for(j = 1; j < KC; j++)
+ for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1];
+ else {
+ for(j = 1; j < KC/2; j++)
+ for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1];
+ for(i = 0; i < 4; i++) tk[i][KC/2] ^= S[tk[i][KC/2 - 1]];
+ for(j = KC/2 + 1; j < KC; j++)
+ for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1];
+ }
+ /* copy values into round key array */
+ for(j = 0; (j < KC) && (t < (ROUNDS+1)*BC); j++, t++)
+ for(i = 0; i < 4; i++) W[t / BC][i][t % BC] = tk[i][j];
+ }
+
+ return 0;
+}
+
+
+
+int rijndaelEncrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds)
+{
+ /* Encryption of one block.
+ */
+ int r, BC, ROUNDS;
+
+ BC = 4;
+ ROUNDS = rounds;
+
+ /* begin with a key addition
+ */
+
+ KeyAddition(a,rk[0],BC);
+
+ /* ROUNDS-1 ordinary rounds
+ */
+ for(r = 1; r < ROUNDS; r++) {
+ Substitution(a,S);
+ ShiftRow128Enc(a);
+ MixColumn(a, rk[r]);
+ /*KeyAddition(a,rk[r],BC);*/
+ }
+
+ /* Last round is special: there is no MixColumn
+ */
+ Substitution(a,S);
+ ShiftRow128Enc(a);
+ KeyAddition(a,rk[ROUNDS],BC);
+
+ return 0;
+}
+
+
+int rijndaelDecrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds)
+{
+ int r, BC, ROUNDS;
+
+ BC = 4;
+ ROUNDS = rounds;
+
+ /* To decrypt: apply the inverse operations of the encrypt routine,
+ * in opposite order
+ *
+ * (KeyAddition is an involution: it 's equal to its inverse)
+ * (the inverse of Substitution with table S is Substitution with the inverse table of S)
+ * (the inverse of Shiftrow is Shiftrow over a suitable distance)
+ */
+
+ /* First the special round:
+ * without InvMixColumn
+ * with extra KeyAddition
+ */
+ KeyAddition(a,rk[ROUNDS],BC);
+ ShiftRow128Dec(a);
+ Substitution(a,Si);
+
+ /* ROUNDS-1 ordinary rounds
+ */
+ for(r = ROUNDS-1; r > 0; r--) {
+ KeyAddition(a,rk[r],BC);
+ InvMixColumn(a);
+ ShiftRow128Dec(a);
+ Substitution(a,Si);
+
+ }
+
+ /* End with the extra key addition
+ */
+
+ KeyAddition(a,rk[0],BC);
+
+ return 0;
+}
+
--- /dev/null
+/* rijndael-alg-ref.h v2.0 August '99
+ * Reference ANSI C code
+ * authors: Paulo Barreto
+ * Vincent Rijmen, K.U.Leuven
+ */
+#ifndef __RIJNDAEL_ALG_H
+#define __RIJNDAEL_ALG_H
+
+#define MAXBC (128/32)
+#define MAXKC (256/32)
+#define MAXROUNDS 14
+
+
+int rijndaelKeySched (MV_U8 k[4][MAXKC], int keyBits, int blockBits, MV_U8 rk[MAXROUNDS+1][4][MAXBC]);
+
+int rijndaelEncrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds);
+int rijndaelDecrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds);
+
+#endif /* __RIJNDAEL_ALG_H */
--- /dev/null
+/* rijndael-api-ref.c v2.1 April 2000
+ * Reference ANSI C code
+ * authors: v2.0 Paulo Barreto
+ * Vincent Rijmen, K.U.Leuven
+ * v2.1 Vincent Rijmen, K.U.Leuven
+ *
+ * This code is placed in the public domain.
+ */
+#include "mvOs.h"
+
+#include "mvAes.h"
+#include "mvAesAlg.h"
+
+
+/* Defines:
+ Add any additional defines you need
+*/
+
+#define MODE_ECB 1 /* Are we ciphering in ECB mode? */
+#define MODE_CBC 2 /* Are we ciphering in CBC mode? */
+#define MODE_CFB1 3 /* Are we ciphering in 1-bit CFB mode? */
+
+
+int aesMakeKey(MV_U8 *expandedKey, MV_U8 *keyMaterial, int keyLen, int blockLen)
+{
+ MV_U8 W[MAXROUNDS+1][4][MAXBC];
+ MV_U8 k[4][MAXKC];
+ MV_U8 j;
+ int i, rounds, KC;
+
+ if (expandedKey == NULL)
+ {
+ return AES_BAD_KEY_INSTANCE;
+ }
+
+ if (!((keyLen == 128) || (keyLen == 192) || (keyLen == 256)))
+ {
+ return AES_BAD_KEY_MAT;
+ }
+
+ if (keyMaterial == NULL)
+ {
+ return AES_BAD_KEY_MAT;
+ }
+
+ /* initialize key schedule: */
+ for(i=0; i<keyLen/8; i++)
+ {
+ j = keyMaterial[i];
+ k[i % 4][i / 4] = j;
+ }
+
+ rijndaelKeySched (k, keyLen, blockLen, W);
+#ifdef MV_AES_DEBUG
+ {
+ MV_U8* pW = &W[0][0][0];
+ int x;
+
+ mvOsPrintf("Expended Key: size = %d\n", sizeof(W));
+ for(i=0; i<sizeof(W); i++)
+ {
+ mvOsPrintf("%02x ", pW[i]);
+ }
+ for(i=0; i<MAXROUNDS+1; i++)
+ {
+ mvOsPrintf("\n Round #%02d: ", i);
+ for(x=0; x<MAXBC; x++)
+ {
+ mvOsPrintf("%02x%02x%02x%02x ",
+ W[i][0][x], W[i][1][x], W[i][2][x], W[i][3][x]);
+ }
+ mvOsPrintf("\n");
+ }
+ }
+#endif /* MV_AES_DEBUG */
+ switch (keyLen)
+ {
+ case 128:
+ rounds = 10;
+ KC = 4;
+ break;
+ case 192:
+ rounds = 12;
+ KC = 6;
+ break;
+ case 256:
+ rounds = 14;
+ KC = 8;
+ break;
+ default :
+ return (-1);
+ }
+
+ for(i=0; i<MAXBC; i++)
+ {
+ for(j=0; j<4; j++)
+ {
+ expandedKey[i*4+j] = W[rounds][j][i];
+ }
+ }
+ for(; i<KC; i++)
+ {
+ for(j=0; j<4; j++)
+ {
+ expandedKey[i*4+j] = W[rounds-1][j][i+MAXBC-KC];
+ }
+ }
+
+
+ return 0;
+}
+
+int aesBlockEncrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int keyLen,
+ MV_U32 *plain, int numBlocks, MV_U32 *cipher)
+{
+ int i, j, t;
+ MV_U8 block[4][MAXBC];
+ int rounds;
+ char *input, *outBuffer;
+
+ input = (char*)plain;
+ outBuffer = (char*)cipher;
+
+ /* check parameter consistency: */
+ if( (expandedKey == NULL) || ((keyLen != 128) && (keyLen != 192) && (keyLen != 256)))
+ {
+ return AES_BAD_KEY_MAT;
+ }
+ if ((mode != MODE_ECB && mode != MODE_CBC))
+ {
+ return AES_BAD_CIPHER_STATE;
+ }
+
+ switch (keyLen)
+ {
+ case 128: rounds = 10; break;
+ case 192: rounds = 12; break;
+ case 256: rounds = 14; break;
+ default : return (-3); /* this cannot happen */
+ }
+
+
+ switch (mode)
+ {
+ case MODE_ECB:
+ for (i = 0; i < numBlocks; i++)
+ {
+ for (j = 0; j < 4; j++)
+ {
+ for(t = 0; t < 4; t++)
+ /* parse input stream into rectangular array */
+ block[t][j] = input[16*i+4*j+t] & 0xFF;
+ }
+ rijndaelEncrypt128(block, (MV_U8 (*)[4][MAXBC])expandedKey, rounds);
+ for (j = 0; j < 4; j++)
+ {
+ /* parse rectangular array into output ciphertext bytes */
+ for(t = 0; t < 4; t++)
+ outBuffer[16*i+4*j+t] = (MV_U8) block[t][j];
+
+ }
+ }
+ break;
+
+ case MODE_CBC:
+ for (j = 0; j < 4; j++)
+ {
+ for(t = 0; t < 4; t++)
+ /* parse initial value into rectangular array */
+ block[t][j] = IV[t+4*j] & 0xFF;
+ }
+ for (i = 0; i < numBlocks; i++)
+ {
+ for (j = 0; j < 4; j++)
+ {
+ for(t = 0; t < 4; t++)
+ /* parse input stream into rectangular array and exor with
+ IV or the previous ciphertext */
+ block[t][j] ^= input[16*i+4*j+t] & 0xFF;
+ }
+ rijndaelEncrypt128(block, (MV_U8 (*)[4][MAXBC])expandedKey, rounds);
+ for (j = 0; j < 4; j++)
+ {
+ /* parse rectangular array into output ciphertext bytes */
+ for(t = 0; t < 4; t++)
+ outBuffer[16*i+4*j+t] = (MV_U8) block[t][j];
+ }
+ }
+ break;
+
+ default: return AES_BAD_CIPHER_STATE;
+ }
+
+ return 0;
+}
+
+int aesBlockDecrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int keyLen,
+ MV_U32 *srcData, int numBlocks, MV_U32 *dstData)
+{
+ int i, j, t;
+ MV_U8 block[4][MAXBC];
+ MV_U8 iv[4][MAXBC];
+ int rounds;
+ char *input, *outBuffer;
+
+ input = (char*)srcData;
+ outBuffer = (char*)dstData;
+
+ if (expandedKey == NULL)
+ {
+ return AES_BAD_KEY_MAT;
+ }
+
+ /* check parameter consistency: */
+ if (keyLen != 128 && keyLen != 192 && keyLen != 256)
+ {
+ return AES_BAD_KEY_MAT;
+ }
+ if ((mode != MODE_ECB && mode != MODE_CBC))
+ {
+ return AES_BAD_CIPHER_STATE;
+ }
+
+ switch (keyLen)
+ {
+ case 128: rounds = 10; break;
+ case 192: rounds = 12; break;
+ case 256: rounds = 14; break;
+ default : return (-3); /* this cannot happen */
+ }
+
+
+ switch (mode)
+ {
+ case MODE_ECB:
+ for (i = 0; i < numBlocks; i++)
+ {
+ for (j = 0; j < 4; j++)
+ {
+ for(t = 0; t < 4; t++)
+ {
+ /* parse input stream into rectangular array */
+ block[t][j] = input[16*i+4*j+t] & 0xFF;
+ }
+ }
+ rijndaelDecrypt128(block, (MV_U8 (*)[4][MAXBC])expandedKey, rounds);
+ for (j = 0; j < 4; j++)
+ {
+ /* parse rectangular array into output ciphertext bytes */
+ for(t = 0; t < 4; t++)
+ outBuffer[16*i+4*j+t] = (MV_U8) block[t][j];
+ }
+ }
+ break;
+
+ case MODE_CBC:
+ /* first block */
+ for (j = 0; j < 4; j++)
+ {
+ for(t = 0; t < 4; t++)
+ {
+ /* parse input stream into rectangular array */
+ block[t][j] = input[4*j+t] & 0xFF;
+ iv[t][j] = block[t][j];
+ }
+ }
+ rijndaelDecrypt128(block, (MV_U8 (*)[4][MAXBC])expandedKey, rounds);
+
+ for (j = 0; j < 4; j++)
+ {
+ /* exor the IV and parse rectangular array into output ciphertext bytes */
+ for(t = 0; t < 4; t++)
+ {
+ outBuffer[4*j+t] = (MV_U8) (block[t][j] ^ IV[t+4*j]);
+ IV[t+4*j] = iv[t][j];
+ }
+ }
+
+ /* next blocks */
+ for (i = 1; i < numBlocks; i++)
+ {
+ for (j = 0; j < 4; j++)
+ {
+ for(t = 0; t < 4; t++)
+ {
+ /* parse input stream into rectangular array */
+ iv[t][j] = input[16*i+4*j+t] & 0xFF;
+ block[t][j] = iv[t][j];
+ }
+ }
+ rijndaelDecrypt128(block, (MV_U8 (*)[4][MAXBC])expandedKey, rounds);
+
+ for (j = 0; j < 4; j++)
+ {
+ /* exor previous ciphertext block and parse rectangular array
+ into output ciphertext bytes */
+ for(t = 0; t < 4; t++)
+ {
+ outBuffer[16*i+4*j+t] = (MV_U8) (block[t][j] ^ IV[t+4*j]);
+ IV[t+4*j] = iv[t][j];
+ }
+ }
+ }
+ break;
+
+ default: return AES_BAD_CIPHER_STATE;
+ }
+
+ return 0;
+}
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "cesa/mvCesa.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#undef CESA_DEBUG
+
+
+/********** Global variables **********/
+
+/* If request size is more than MV_CESA_MAX_BUF_SIZE the
+ * request is processed as fragmented request.
+ */
+
+MV_CESA_STATS cesaStats;
+
+MV_BUF_INFO cesaSramSaBuf;
+short cesaLastSid = -1;
+MV_CESA_SA* pCesaSAD = NULL;
+MV_U16 cesaMaxSA = 0;
+
+MV_CESA_REQ* pCesaReqFirst = NULL;
+MV_CESA_REQ* pCesaReqLast = NULL;
+MV_CESA_REQ* pCesaReqEmpty = NULL;
+MV_CESA_REQ* pCesaReqProcess = NULL;
+int cesaQueueDepth = 0;
+int cesaReqResources = 0;
+
+MV_CESA_SRAM_MAP* cesaSramVirtPtr = NULL;
+MV_U32 cesaCryptEngBase = 0;
+void *cesaOsHandle = NULL;
+#if (MV_CESA_VERSION >= 3)
+MV_U32 cesaChainLength = 0;
+int chainReqNum = 0;
+MV_U32 chainIndex = 0;
+MV_CESA_REQ* pNextActiveChain = 0;
+MV_CESA_REQ* pEndCurrChain = 0;
+MV_BOOL isFirstReq = MV_TRUE;
+#endif
+
+static INLINE MV_U8* mvCesaSramAddrGet(void)
+{
+#ifdef MV_CESA_NO_SRAM
+ return (MV_U8*)cesaSramVirtPtr;
+#else
+ return (MV_U8*)cesaCryptEngBase;
+#endif /* MV_CESA_NO_SRAM */
+}
+
+static INLINE MV_ULONG mvCesaSramVirtToPhys(void* pDev, MV_U8* pSramVirt)
+{
+#ifdef MV_CESA_NO_SRAM
+ return (MV_ULONG)mvOsIoVirtToPhy(NULL, pSramVirt);
+#else
+ return (MV_ULONG)pSramVirt;
+#endif /* MV_CESA_NO_SRAM */
+}
+
+/* Internal Function prototypes */
+
+static INLINE void mvCesaSramDescrBuild(MV_U32 config, int frag,
+ int cryptoOffset, int ivOffset, int cryptoLength,
+ int macOffset, int digestOffset, int macLength, int macTotalLen,
+ MV_CESA_REQ *pCesaReq, MV_DMA_DESC* pDmaDesc);
+
+static INLINE void mvCesaSramSaUpdate(short sid, MV_DMA_DESC *pDmaDesc);
+
+static INLINE int mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf,
+ MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf,
+ int offset, int copySize, MV_BOOL skipFlush);
+
+static void mvCesaHmacIvGet(MV_CESA_MAC_MODE macMode, unsigned char key[], int keyLength,
+ unsigned char innerIV[], unsigned char outerIV[]);
+
+static MV_STATUS mvCesaFragAuthComplete(MV_CESA_REQ* pReq, MV_CESA_SA* pSA,
+ int macDataSize);
+
+static MV_CESA_COMMAND* mvCesaCtrModeInit(void);
+
+static MV_STATUS mvCesaCtrModePrepare(MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd);
+static MV_STATUS mvCesaCtrModeComplete(MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd);
+static void mvCesaCtrModeFinish(MV_CESA_COMMAND *pCmd);
+
+static INLINE MV_STATUS mvCesaReqProcess(MV_CESA_REQ* pReq);
+static MV_STATUS mvCesaFragReqProcess(MV_CESA_REQ* pReq, MV_U8 frag);
+
+static INLINE MV_STATUS mvCesaParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, MV_U8* pFixOffset);
+static INLINE MV_STATUS mvCesaFragParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd);
+
+static INLINE void mvCesaFragSizeFind(MV_CESA_SA* pSA, MV_CESA_REQ* pReq,
+ int cryptoOffset, int macOffset,
+ int* pCopySize, int* pCryptoDataSize, int* pMacDataSize);
+static MV_STATUS mvCesaMbufCacheUnmap(MV_CESA_MBUF* pMbuf, int offset, int size);
+
+
+/* Go to the next request in the request queue */
+static INLINE MV_CESA_REQ* MV_CESA_REQ_NEXT_PTR(MV_CESA_REQ* pReq)
+{
+ if(pReq == pCesaReqLast)
+ return pCesaReqFirst;
+
+ return pReq+1;
+}
+
+#if (MV_CESA_VERSION >= 3)
+/* Go to the previous request in the request queue */
+static INLINE MV_CESA_REQ* MV_CESA_REQ_PREV_PTR(MV_CESA_REQ* pReq)
+{
+ if(pReq == pCesaReqFirst)
+ return pCesaReqLast;
+
+ return pReq-1;
+}
+
+#endif
+
+
+static INLINE void mvCesaReqProcessStart(MV_CESA_REQ* pReq)
+{
+ int frag;
+
+#if (MV_CESA_VERSION >= 3)
+ pReq->state = MV_CESA_CHAIN;
+#else
+ pReq->state = MV_CESA_PROCESS;
+#endif
+ cesaStats.startCount++;
+
+ if(pReq->fragMode == MV_CESA_FRAG_NONE)
+ {
+ frag = 0;
+ }
+ else
+ {
+ frag = pReq->frags.nextFrag;
+ pReq->frags.nextFrag++;
+ }
+#if (MV_CESA_VERSION >= 2)
+ /* Enable TDMA engine */
+ MV_REG_WRITE(MV_CESA_TDMA_CURR_DESC_PTR_REG, 0);
+ MV_REG_WRITE(MV_CESA_TDMA_NEXT_DESC_PTR_REG,
+ (MV_U32)mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst));
+#else
+ /* Enable IDMA engine */
+ MV_REG_WRITE(IDMA_CURR_DESC_PTR_REG(0), 0);
+ MV_REG_WRITE(IDMA_NEXT_DESC_PTR_REG(0),
+ (MV_U32)mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst));
+#endif /* MV_CESA_VERSION >= 2 */
+
+#if defined(MV_BRIDGE_SYNC_REORDER)
+ mvOsBridgeReorderWA();
+#endif
+
+ /* Start Accelerator */
+ MV_REG_WRITE(MV_CESA_CMD_REG, MV_CESA_CMD_CHAN_ENABLE_MASK);
+}
+
+
+/*******************************************************************************
+* mvCesaHalInit - Initialize the CESA driver
+*
+* DESCRIPTION:
+* This function initialize the CESA driver.
+* 1) Session database
+* 2) Request queue
+* 4) DMA descriptor lists - one list per request. Each list
+* has MV_CESA_MAX_DMA_DESC descriptors.
+*
+* INPUT:
+* numOfSession - maximum number of supported sessions
+* queueDepth - number of elements in the request queue.
+* pSramBase - virtual address of Sram
+* osHandle - A handle used by the OS to allocate memory for the
+* module (Passed to the OS Services layer)
+*
+* RETURN:
+* MV_OK - Success
+* MV_NO_RESOURCE - Fail, can't allocate resources:
+* Session database, request queue,
+* DMA descriptors list, LRU cache database.
+* MV_NOT_ALIGNED - Sram base address is not 8 byte aligned.
+*
+*******************************************************************************/
+MV_STATUS mvCesaHalInit (int numOfSession, int queueDepth, char* pSramBase, MV_U32 cryptEngBase,
+ void *osHandle)
+{
+ int i, req;
+ MV_U32 descOffsetReg, configReg;
+ MV_CESA_SRAM_SA *pSramSA;
+
+
+ mvOsPrintf("mvCesaInit: sessions=%d, queue=%d, pSram=%p\n",
+ numOfSession, queueDepth, pSramBase);
+
+ cesaOsHandle = osHandle;
+ /* Create Session database */
+ pCesaSAD = mvOsMalloc(sizeof(MV_CESA_SA)*numOfSession);
+ if(pCesaSAD == NULL)
+ {
+ mvOsPrintf("mvCesaInit: Can't allocate %u bytes for %d SAs\n",
+ sizeof(MV_CESA_SA)*numOfSession, numOfSession);
+ mvCesaFinish();
+ return MV_NO_RESOURCE;
+ }
+ memset(pCesaSAD, 0, sizeof(MV_CESA_SA)*numOfSession);
+ cesaMaxSA = numOfSession;
+
+ /* Allocate imag of sramSA in the DRAM */
+ cesaSramSaBuf.bufSize = sizeof(MV_CESA_SRAM_SA)*numOfSession +
+ CPU_D_CACHE_LINE_SIZE;
+
+ cesaSramSaBuf.bufVirtPtr = mvOsIoCachedMalloc(osHandle,cesaSramSaBuf.bufSize,
+ &cesaSramSaBuf.bufPhysAddr,
+ &cesaSramSaBuf.memHandle);
+
+ if(cesaSramSaBuf.bufVirtPtr == NULL)
+ {
+ mvOsPrintf("mvCesaInit: Can't allocate %d bytes for sramSA structures\n",
+ cesaSramSaBuf.bufSize);
+ mvCesaFinish();
+ return MV_NO_RESOURCE;
+ }
+ memset(cesaSramSaBuf.bufVirtPtr, 0, cesaSramSaBuf.bufSize);
+ pSramSA = (MV_CESA_SRAM_SA*)MV_ALIGN_UP((MV_ULONG)cesaSramSaBuf.bufVirtPtr,
+ CPU_D_CACHE_LINE_SIZE);
+ for(i=0; i<numOfSession; i++)
+ {
+ pCesaSAD[i].pSramSA = &pSramSA[i];
+ }
+
+ /* Create request queue */
+ pCesaReqFirst = mvOsMalloc(sizeof(MV_CESA_REQ)*queueDepth);
+ if(pCesaReqFirst == NULL)
+ {
+ mvOsPrintf("mvCesaInit: Can't allocate %u bytes for %d requests\n",
+ sizeof(MV_CESA_REQ)*queueDepth, queueDepth);
+ mvCesaFinish();
+ return MV_NO_RESOURCE;
+ }
+ memset(pCesaReqFirst, 0, sizeof(MV_CESA_REQ)*queueDepth);
+ pCesaReqEmpty = pCesaReqFirst;
+ pCesaReqLast = pCesaReqFirst + (queueDepth-1);
+ pCesaReqProcess = pCesaReqEmpty;
+ cesaQueueDepth = queueDepth;
+ cesaReqResources = queueDepth;
+#if (MV_CESA_VERSION >= 3)
+ cesaChainLength = MAX_CESA_CHAIN_LENGTH;
+#endif
+ /* pSramBase must be 8 byte aligned */
+ if( MV_IS_NOT_ALIGN((MV_ULONG)pSramBase, 8) )
+ {
+ mvOsPrintf("mvCesaInit: pSramBase (%p) must be 8 byte aligned\n",
+ pSramBase);
+ mvCesaFinish();
+ return MV_NOT_ALIGNED;
+ }
+ cesaSramVirtPtr = (MV_CESA_SRAM_MAP*)pSramBase;
+
+ cesaCryptEngBase = cryptEngBase;
+
+ /*memset(cesaSramVirtPtr, 0, sizeof(MV_CESA_SRAM_MAP));*/
+
+ /* Clear registers */
+ MV_REG_WRITE( MV_CESA_CFG_REG, 0);
+ MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0);
+ MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0);
+
+ /* Initialize DMA descriptor lists for all requests in Request queue */
+ descOffsetReg = configReg = 0;
+ for(req=0; req<queueDepth; req++)
+ {
+ int frag;
+ MV_CESA_REQ* pReq;
+ MV_DMA_DESC* pDmaDesc;
+
+ pReq = &pCesaReqFirst[req];
+
+ pReq->cesaDescBuf.bufSize = sizeof(MV_CESA_DESC)*MV_CESA_MAX_REQ_FRAGS +
+ CPU_D_CACHE_LINE_SIZE;
+
+ pReq->cesaDescBuf.bufVirtPtr =
+ mvOsIoCachedMalloc(osHandle,pReq->cesaDescBuf.bufSize,
+ &pReq->cesaDescBuf.bufPhysAddr,
+ &pReq->cesaDescBuf.memHandle);
+
+ if(pReq->cesaDescBuf.bufVirtPtr == NULL)
+ {
+ mvOsPrintf("mvCesaInit: req=%d, Can't allocate %d bytes for CESA descriptors\n",
+ req, pReq->cesaDescBuf.bufSize);
+ mvCesaFinish();
+ return MV_NO_RESOURCE;
+ }
+ memset(pReq->cesaDescBuf.bufVirtPtr, 0, pReq->cesaDescBuf.bufSize);
+ pReq->pCesaDesc = (MV_CESA_DESC*)MV_ALIGN_UP((MV_ULONG)pReq->cesaDescBuf.bufVirtPtr,
+ CPU_D_CACHE_LINE_SIZE);
+
+ pReq->dmaDescBuf.bufSize = sizeof(MV_DMA_DESC)*MV_CESA_MAX_DMA_DESC*MV_CESA_MAX_REQ_FRAGS +
+ CPU_D_CACHE_LINE_SIZE;
+
+ pReq->dmaDescBuf.bufVirtPtr =
+ mvOsIoCachedMalloc(osHandle,pReq->dmaDescBuf.bufSize,
+ &pReq->dmaDescBuf.bufPhysAddr,
+ &pReq->dmaDescBuf.memHandle);
+
+ if(pReq->dmaDescBuf.bufVirtPtr == NULL)
+ {
+ mvOsPrintf("mvCesaInit: req=%d, Can't allocate %d bytes for DMA descriptor list\n",
+ req, pReq->dmaDescBuf.bufSize);
+ mvCesaFinish();
+ return MV_NO_RESOURCE;
+ }
+ memset(pReq->dmaDescBuf.bufVirtPtr, 0, pReq->dmaDescBuf.bufSize);
+ pDmaDesc = (MV_DMA_DESC*)MV_ALIGN_UP((MV_ULONG)pReq->dmaDescBuf.bufVirtPtr,
+ CPU_D_CACHE_LINE_SIZE);
+
+ for(frag=0; frag<MV_CESA_MAX_REQ_FRAGS; frag++)
+ {
+ MV_CESA_DMA* pDma = &pReq->dma[frag];
+
+ pDma->pDmaFirst = pDmaDesc;
+ pDma->pDmaLast = NULL;
+
+ for(i=0; i<MV_CESA_MAX_DMA_DESC-1; i++)
+ {
+ /* link all DMA descriptors together */
+ pDma->pDmaFirst[i].phyNextDescPtr =
+ MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pDmaDesc[i+1]));
+ }
+ pDma->pDmaFirst[i].phyNextDescPtr = 0;
+ mvOsCacheFlush(NULL, &pDma->pDmaFirst[0], MV_CESA_MAX_DMA_DESC*sizeof(MV_DMA_DESC));
+
+ pDmaDesc += MV_CESA_MAX_DMA_DESC;
+ }
+ }
+ /*mvCesaCryptoIvSet(NULL, MV_CESA_MAX_IV_LENGTH);*/
+ descOffsetReg = (MV_U16)((MV_U8*)&cesaSramVirtPtr->desc - mvCesaSramAddrGet());
+ MV_REG_WRITE(MV_CESA_CHAN_DESC_OFFSET_REG, descOffsetReg);
+
+ configReg |= (MV_CESA_CFG_WAIT_DMA_MASK | MV_CESA_CFG_ACT_DMA_MASK);
+#if (MV_CESA_VERSION >= 3)
+ configReg |= MV_CESA_CFG_CHAIN_MODE_MASK;
+#endif
+
+#if (MV_CESA_VERSION >= 2)
+ /* Initialize TDMA engine */
+ MV_REG_WRITE(MV_CESA_TDMA_CTRL_REG, MV_CESA_TDMA_CTRL_VALUE);
+ MV_REG_WRITE(MV_CESA_TDMA_BYTE_COUNT_REG, 0);
+ MV_REG_WRITE(MV_CESA_TDMA_CURR_DESC_PTR_REG, 0);
+#else
+ /* Initialize IDMA #0 engine */
+ MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), 0);
+ MV_REG_WRITE(IDMA_BYTE_COUNT_REG(0), 0);
+ MV_REG_WRITE(IDMA_CURR_DESC_PTR_REG(0), 0);
+ MV_REG_WRITE(IDMA_CTRL_HIGH_REG(0), ICCHR_ENDIAN_LITTLE
+#ifdef MV_CPU_LE
+ | ICCHR_DESC_BYTE_SWAP_EN
+#endif
+ );
+ /* Clear Cause Byte of IDMA channel to be used */
+ MV_REG_WRITE( IDMA_CAUSE_REG, ~ICICR_CAUSE_MASK_ALL(0));
+ MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), MV_CESA_IDMA_CTRL_LOW_VALUE);
+#endif /* (MV_CESA_VERSION >= 2) */
+
+ /* Set CESA configuration registers */
+ MV_REG_WRITE( MV_CESA_CFG_REG, configReg);
+ mvCesaDebugStatsClear();
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaFinish - Shutdown the CESA driver
+*
+* DESCRIPTION:
+* This function shutdown the CESA driver and free all allocted resources.
+*
+* INPUT: None
+*
+* RETURN:
+* MV_OK - Success
+* Other - Fail
+*
+*******************************************************************************/
+MV_STATUS mvCesaFinish (void)
+{
+ int req;
+ MV_CESA_REQ* pReq;
+
+ mvOsPrintf("mvCesaFinish: \n");
+
+ cesaSramVirtPtr = NULL;
+
+ /* Free all resources: DMA list, etc. */
+ for(req=0; req<cesaQueueDepth; req++)
+ {
+ pReq = &pCesaReqFirst[req];
+ if(pReq->dmaDescBuf.bufVirtPtr != NULL)
+ {
+ mvOsIoCachedFree(cesaOsHandle,pReq->dmaDescBuf.bufSize,
+ pReq->dmaDescBuf.bufPhysAddr,
+ pReq->dmaDescBuf.bufVirtPtr,
+ pReq->dmaDescBuf.memHandle);
+ }
+ if(pReq->cesaDescBuf.bufVirtPtr != NULL)
+ {
+ mvOsIoCachedFree(cesaOsHandle,pReq->cesaDescBuf.bufSize,
+ pReq->cesaDescBuf.bufPhysAddr,
+ pReq->cesaDescBuf.bufVirtPtr,
+ pReq->cesaDescBuf.memHandle);
+ }
+ }
+#if (MV_CESA_VERSION < 2)
+ MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), 0);
+#endif /* (MV_CESA_VERSION < 2) */
+
+ /* Free request queue */
+ if(pCesaReqFirst != NULL)
+ {
+ mvOsFree(pCesaReqFirst);
+ pCesaReqFirst = pCesaReqLast = NULL;
+ pCesaReqEmpty = pCesaReqProcess = NULL;
+ cesaQueueDepth = cesaReqResources = 0;
+ }
+ /* Free SA database */
+ if(pCesaSAD != NULL)
+ {
+ mvOsFree(pCesaSAD);
+ pCesaSAD = NULL;
+ cesaMaxSA = 0;
+ }
+ MV_REG_WRITE( MV_CESA_CFG_REG, 0);
+ MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0);
+ MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaCryptoIvSet - Set IV value for Crypto algorithm working in CBC mode
+*
+* DESCRIPTION:
+* This function set IV value using by Crypto algorithms in CBC mode.
+* Each channel has its own IV value.
+* This function gets IV value from the caller. If no IV value passed from
+* the caller or only part of IV passed, the function will init the rest part
+* of IV value (or the whole IV) by random value.
+*
+* INPUT:
+* MV_U8* pIV - Pointer to IV value supplied by user. If pIV==NULL
+* the function will generate random IV value.
+* int ivSize - size (in bytes) of IV provided by user. If ivSize is
+* smaller than maximum IV size, the function will complete
+* IV by random value.
+*
+* RETURN:
+* MV_OK - Success
+* Other - Fail
+*
+*******************************************************************************/
+MV_STATUS mvCesaCryptoIvSet(MV_U8* pIV, int ivSize)
+{
+ MV_U8* pSramIV;
+#if defined(MV646xx)
+ mvOsPrintf("mvCesaCryptoIvSet: ERR. shouldn't use this call on MV64660\n");
+#endif
+ pSramIV = cesaSramVirtPtr->cryptoIV;
+ if(ivSize > MV_CESA_MAX_IV_LENGTH)
+ {
+ mvOsPrintf("mvCesaCryptoIvSet: ivSize (%d) is too large\n", ivSize);
+ ivSize = MV_CESA_MAX_IV_LENGTH;
+ }
+ if(pIV != NULL)
+ {
+ memcpy(pSramIV, pIV, ivSize);
+ ivSize = MV_CESA_MAX_IV_LENGTH - ivSize;
+ pSramIV += ivSize;
+ }
+
+ while(ivSize > 0)
+ {
+ int size, mv_random = mvOsRand();
+
+ size = MV_MIN(ivSize, sizeof(mv_random));
+ memcpy(pSramIV, (void*)&mv_random, size);
+
+ pSramIV += size;
+ ivSize -= size;
+ }
+/*
+ mvOsCacheFlush(NULL, cesaSramVirtPtr->cryptoIV,
+ MV_CESA_MAX_IV_LENGTH);
+ mvOsCacheInvalidate(NULL, cesaSramVirtPtr->cryptoIV,
+ MV_CESA_MAX_IV_LENGTH);
+*/
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaSessionOpen - Open new uni-directional crypto session
+*
+* DESCRIPTION:
+* This function open new session.
+*
+* INPUT:
+* MV_CESA_OPEN_SESSION *pSession - pointer to new session input parameters
+*
+* OUTPUT:
+* short *pSid - session ID, should be used for all future
+* requests over this session.
+*
+* RETURN:
+* MV_OK - Session opend successfully.
+* MV_FULL - All sessions are in use, no free place in
+* SA database.
+* MV_BAD_PARAM - One of session input parameters is invalid.
+*
+*******************************************************************************/
+MV_STATUS mvCesaSessionOpen(MV_CESA_OPEN_SESSION *pSession, short* pSid)
+{
+ short sid;
+ MV_U32 config = 0;
+ int digestSize;
+
+ cesaStats.openedCount++;
+
+ /* Find free entry in SAD */
+ for(sid=0; sid<cesaMaxSA; sid++)
+ {
+ if(pCesaSAD[sid].valid == 0)
+ {
+ break;
+ }
+ }
+ if(sid == cesaMaxSA)
+ {
+ mvOsPrintf("mvCesaSessionOpen: SA Database is FULL\n");
+ return MV_FULL;
+ }
+
+ /* Check Input parameters for Open session */
+ if (pSession->operation >= MV_CESA_MAX_OPERATION)
+ {
+ mvOsPrintf("mvCesaSessionOpen: Unexpected operation %d\n",
+ pSession->operation);
+ return MV_BAD_PARAM;
+ }
+ config |= (pSession->operation << MV_CESA_OPERATION_OFFSET);
+
+ if( (pSession->direction != MV_CESA_DIR_ENCODE) &&
+ (pSession->direction != MV_CESA_DIR_DECODE) )
+ {
+ mvOsPrintf("mvCesaSessionOpen: Unexpected direction %d\n",
+ pSession->direction);
+ return MV_BAD_PARAM;
+ }
+ config |= (pSession->direction << MV_CESA_DIRECTION_BIT);
+ /* Clear SA entry */
+ /* memset(&pCesaSAD[sid], 0, sizeof(pCesaSAD[sid])); */
+
+ /* Check AUTH parameters and update SA entry */
+ if(pSession->operation != MV_CESA_CRYPTO_ONLY)
+ {
+ /* For HMAC (MD5 and SHA1) - Maximum Key size is 64 bytes */
+ if( (pSession->macMode == MV_CESA_MAC_HMAC_MD5) ||
+ (pSession->macMode == MV_CESA_MAC_HMAC_SHA1) )
+ {
+ if(pSession->macKeyLength > MV_CESA_MAX_MAC_KEY_LENGTH)
+ {
+ mvOsPrintf("mvCesaSessionOpen: macKeyLength %d is too large\n",
+ pSession->macKeyLength);
+ return MV_BAD_PARAM;
+ }
+ mvCesaHmacIvGet(pSession->macMode, pSession->macKey, pSession->macKeyLength,
+ pCesaSAD[sid].pSramSA->macInnerIV,
+ pCesaSAD[sid].pSramSA->macOuterIV);
+ pCesaSAD[sid].macKeyLength = pSession->macKeyLength;
+ }
+ switch(pSession->macMode)
+ {
+ case MV_CESA_MAC_MD5:
+ case MV_CESA_MAC_HMAC_MD5:
+ digestSize = MV_CESA_MD5_DIGEST_SIZE;
+ break;
+
+ case MV_CESA_MAC_SHA1:
+ case MV_CESA_MAC_HMAC_SHA1:
+ digestSize = MV_CESA_SHA1_DIGEST_SIZE;
+ break;
+
+ default:
+ mvOsPrintf("mvCesaSessionOpen: Unexpected macMode %d\n",
+ pSession->macMode);
+ return MV_BAD_PARAM;
+ }
+ config |= (pSession->macMode << MV_CESA_MAC_MODE_OFFSET);
+
+ /* Supported digest sizes: MD5 - 16 bytes (128 bits), */
+ /* SHA1 - 20 bytes (160 bits) or 12 bytes (96 bits) for both */
+ if( (pSession->digestSize != digestSize) && (pSession->digestSize != 12))
+ {
+ mvOsPrintf("mvCesaSessionOpen: Unexpected digest size %d\n",
+ pSession->digestSize);
+ mvOsPrintf("\t Valid values [bytes]: MD5-16, SHA1-20, Both-12\n");
+ return MV_BAD_PARAM;
+ }
+ pCesaSAD[sid].digestSize = pSession->digestSize;
+
+ if(pCesaSAD[sid].digestSize == 12)
+ {
+ /* Set MV_CESA_MAC_DIGEST_SIZE_BIT if digest size is 96 bits */
+ config |= (MV_CESA_MAC_DIGEST_96B << MV_CESA_MAC_DIGEST_SIZE_BIT);
+ }
+ }
+
+ /* Check CRYPTO parameters and update SA entry */
+ if(pSession->operation != MV_CESA_MAC_ONLY)
+ {
+ switch(pSession->cryptoAlgorithm)
+ {
+ case MV_CESA_CRYPTO_DES:
+ pCesaSAD[sid].cryptoKeyLength = MV_CESA_DES_KEY_LENGTH;
+ pCesaSAD[sid].cryptoBlockSize = MV_CESA_DES_BLOCK_SIZE;
+ break;
+
+ case MV_CESA_CRYPTO_3DES:
+ pCesaSAD[sid].cryptoKeyLength = MV_CESA_3DES_KEY_LENGTH;
+ pCesaSAD[sid].cryptoBlockSize = MV_CESA_DES_BLOCK_SIZE;
+ /* Only EDE mode is supported */
+ config |= (MV_CESA_CRYPTO_3DES_EDE <<
+ MV_CESA_CRYPTO_3DES_MODE_BIT);
+ break;
+
+ case MV_CESA_CRYPTO_AES:
+ switch(pSession->cryptoKeyLength)
+ {
+ case 16:
+ pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_128_KEY_LENGTH;
+ config |= (MV_CESA_CRYPTO_AES_KEY_128 <<
+ MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET);
+ break;
+
+ case 24:
+ pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_192_KEY_LENGTH;
+ config |= (MV_CESA_CRYPTO_AES_KEY_192 <<
+ MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET);
+ break;
+
+ case 32:
+ default:
+ pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_256_KEY_LENGTH;
+ config |= (MV_CESA_CRYPTO_AES_KEY_256 <<
+ MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET);
+ break;
+ }
+ pCesaSAD[sid].cryptoBlockSize = MV_CESA_AES_BLOCK_SIZE;
+ break;
+
+ default:
+ mvOsPrintf("mvCesaSessionOpen: Unexpected cryptoAlgorithm %d\n",
+ pSession->cryptoAlgorithm);
+ return MV_BAD_PARAM;
+ }
+ config |= (pSession->cryptoAlgorithm << MV_CESA_CRYPTO_ALG_OFFSET);
+
+ if(pSession->cryptoKeyLength != pCesaSAD[sid].cryptoKeyLength)
+ {
+ mvOsPrintf("cesaSessionOpen: Wrong CryptoKeySize %d != %d\n",
+ pSession->cryptoKeyLength, pCesaSAD[sid].cryptoKeyLength);
+ return MV_BAD_PARAM;
+ }
+
+ /* Copy Crypto key */
+ if( (pSession->cryptoAlgorithm == MV_CESA_CRYPTO_AES) &&
+ (pSession->direction == MV_CESA_DIR_DECODE))
+ {
+ /* Crypto Key for AES decode is computed from original key material */
+ /* and depend on cryptoKeyLength (128/192/256 bits) */
+ aesMakeKey(pCesaSAD[sid].pSramSA->cryptoKey, pSession->cryptoKey,
+ pSession->cryptoKeyLength*8, MV_CESA_AES_BLOCK_SIZE*8);
+ }
+ else
+ {
+ /*panic("mvCesaSessionOpen2");*/
+ memcpy(pCesaSAD[sid].pSramSA->cryptoKey, pSession->cryptoKey,
+ pCesaSAD[sid].cryptoKeyLength);
+
+ }
+
+ switch(pSession->cryptoMode)
+ {
+ case MV_CESA_CRYPTO_ECB:
+ pCesaSAD[sid].cryptoIvSize = 0;
+ break;
+
+ case MV_CESA_CRYPTO_CBC:
+ pCesaSAD[sid].cryptoIvSize = pCesaSAD[sid].cryptoBlockSize;
+ break;
+
+ case MV_CESA_CRYPTO_CTR:
+ /* Supported only for AES algorithm */
+ if(pSession->cryptoAlgorithm != MV_CESA_CRYPTO_AES)
+ {
+ mvOsPrintf("mvCesaSessionOpen: CRYPTO CTR mode supported for AES only\n");
+ return MV_BAD_PARAM;
+ }
+ pCesaSAD[sid].cryptoIvSize = 0;
+ pCesaSAD[sid].ctrMode = 1;
+ /* Replace to ECB mode for HW */
+ pSession->cryptoMode = MV_CESA_CRYPTO_ECB;
+ break;
+
+ default:
+ mvOsPrintf("mvCesaSessionOpen: Unexpected cryptoMode %d\n",
+ pSession->cryptoMode);
+ return MV_BAD_PARAM;
+ }
+
+ config |= (pSession->cryptoMode << MV_CESA_CRYPTO_MODE_BIT);
+ }
+ pCesaSAD[sid].config = config;
+
+ mvOsCacheFlush(NULL, pCesaSAD[sid].pSramSA, sizeof(MV_CESA_SRAM_SA));
+ if(pSid != NULL)
+ *pSid = sid;
+
+ pCesaSAD[sid].valid = 1;
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaSessionClose - Close active crypto session
+*
+* DESCRIPTION:
+* This function closes existing session
+*
+* INPUT:
+* short sid - Unique identifier of the session to be closed
+*
+* RETURN:
+* MV_OK - Session closed successfully.
+* MV_BAD_PARAM - Session identifier is out of valid range.
+* MV_NOT_FOUND - There is no active session with such ID.
+*
+*******************************************************************************/
+MV_STATUS mvCesaSessionClose(short sid)
+{
+ cesaStats.closedCount++;
+
+ if(sid >= cesaMaxSA)
+ {
+ mvOsPrintf("CESA Error: sid (%d) is too big\n", sid);
+ return MV_BAD_PARAM;
+ }
+ if(pCesaSAD[sid].valid == 0)
+ {
+ mvOsPrintf("CESA Warning: Session (sid=%d) is invalid\n", sid);
+ return MV_NOT_FOUND;
+ }
+ if(cesaLastSid == sid)
+ cesaLastSid = -1;
+
+ pCesaSAD[sid].valid = 0;
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaAction - Perform crypto operation
+*
+* DESCRIPTION:
+* This function set new CESA request FIFO queue for further HW processing.
+* The function checks request parameters before set new request to the queue.
+* If one of the CESA channels is ready for processing the request will be
+* passed to HW. When request processing is finished the CESA interrupt will
+* be generated by HW. The caller should call mvCesaReadyGet() function to
+* complete request processing and get result.
+*
+* INPUT:
+* MV_CESA_COMMAND *pCmd - pointer to new CESA request.
+* It includes pointers to Source and Destination
+* buffers, session identifier get from
+* mvCesaSessionOpen() function, pointer to caller
+* private data and all needed crypto parameters.
+*
+* RETURN:
+* MV_OK - request successfully added to request queue
+* and will be processed.
+* MV_NO_MORE - request successfully added to request queue and will
+* be processed, but request queue became Full and next
+* request will not be accepted.
+* MV_NO_RESOURCE - request queue is FULL and the request can not
+* be processed.
+* MV_OUT_OF_CPU_MEM - memory allocation needed for request processing is
+* failed. Request can not be processed.
+* MV_NOT_ALLOWED - This mixed request (CRYPTO+MAC) can not be processed
+* as one request and should be splitted for two requests:
+* CRYPTO_ONLY and MAC_ONLY.
+* MV_BAD_PARAM - One of the request parameters is out of valid range.
+* The request can not be processed.
+*
+*******************************************************************************/
+MV_STATUS mvCesaAction (MV_CESA_COMMAND *pCmd)
+{
+ MV_STATUS status;
+ MV_CESA_REQ* pReq = pCesaReqEmpty;
+ int sid = pCmd->sessionId;
+ MV_CESA_SA* pSA = &pCesaSAD[sid];
+#if (MV_CESA_VERSION >= 3)
+ MV_CESA_REQ* pFromReq;
+ MV_CESA_REQ* pToReq;
+#endif
+ cesaStats.reqCount++;
+
+ /* Check that the request queue is not FULL */
+ if(cesaReqResources == 0)
+ return MV_NO_RESOURCE;
+
+ if( (sid >= cesaMaxSA) || (!pSA->valid) )
+ {
+ mvOsPrintf("CESA Action Error: Session sid=%d is INVALID\n", sid);
+ return MV_BAD_PARAM;
+ }
+ pSA->count++;
+
+ if(pSA->ctrMode)
+ {
+ /* AES in CTR mode can't be mixed with Authentication */
+ if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+ {
+ mvOsPrintf("mvCesaAction : CRYPTO CTR mode can't be mixed with AUTH\n");
+ return MV_NOT_ALLOWED;
+ }
+ /* All other request parameters should not be checked because key stream */
+ /* (not user data) processed by AES HW engine */
+ pReq->pOrgCmd = pCmd;
+ /* Allocate temporary pCmd structure for Key stream */
+ pCmd = mvCesaCtrModeInit();
+ if(pCmd == NULL)
+ return MV_OUT_OF_CPU_MEM;
+
+ /* Prepare Key stream */
+ mvCesaCtrModePrepare(pCmd, pReq->pOrgCmd);
+ pReq->fixOffset = 0;
+ }
+ else
+ {
+ /* Check request parameters and calculae fixOffset */
+ status = mvCesaParamCheck(pSA, pCmd, &pReq->fixOffset);
+ if(status != MV_OK)
+ {
+ return status;
+ }
+ }
+ pReq->pCmd = pCmd;
+
+ /* Check if the packet need fragmentation */
+ if(pCmd->pSrc->mbufSize <= sizeof(cesaSramVirtPtr->buf) )
+ {
+ /* request size is smaller than single buffer size */
+ pReq->fragMode = MV_CESA_FRAG_NONE;
+
+ /* Prepare NOT fragmented packets */
+ status = mvCesaReqProcess(pReq);
+ if(status != MV_OK)
+ {
+ mvOsPrintf("CesaReady: ReqProcess error: pReq=%p, status=0x%x\n",
+ pReq, status);
+ }
+#if (MV_CESA_VERSION >= 3)
+ pReq->frags.numFrag = 1;
+#endif
+ }
+ else
+ {
+ MV_U8 frag = 0;
+
+ /* request size is larger than buffer size - needs fragmentation */
+
+ /* Check restrictions for processing fragmented packets */
+ status = mvCesaFragParamCheck(pSA, pCmd);
+ if(status != MV_OK)
+ return status;
+
+ pReq->fragMode = MV_CESA_FRAG_FIRST;
+ pReq->frags.nextFrag = 0;
+
+ /* Prepare Process Fragmented packets */
+ while(pReq->fragMode != MV_CESA_FRAG_LAST)
+ {
+ if(frag >= MV_CESA_MAX_REQ_FRAGS)
+ {
+ mvOsPrintf("mvCesaAction Error: Too large request frag=%d\n", frag);
+ return MV_OUT_OF_CPU_MEM;
+ }
+ status = mvCesaFragReqProcess(pReq, frag);
+ if(status == MV_OK) {
+#if (MV_CESA_VERSION >= 3)
+ if(frag) {
+ pReq->dma[frag-1].pDmaLast->phyNextDescPtr =
+ MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst));
+ mvOsCacheFlush(NULL, pReq->dma[frag-1].pDmaLast, sizeof(MV_DMA_DESC));
+ }
+#endif
+ frag++;
+ }
+ }
+ pReq->frags.numFrag = frag;
+#if (MV_CESA_VERSION >= 3)
+ if(chainReqNum) {
+ chainReqNum += pReq->frags.numFrag;
+ if(chainReqNum >= MAX_CESA_CHAIN_LENGTH)
+ chainReqNum = MAX_CESA_CHAIN_LENGTH;
+ }
+#endif
+ }
+
+ pReq->state = MV_CESA_PENDING;
+
+ pCesaReqEmpty = MV_CESA_REQ_NEXT_PTR(pReq);
+ cesaReqResources -= 1;
+
+/* #ifdef CESA_DEBUG */
+ if( (cesaQueueDepth - cesaReqResources) > cesaStats.maxReqCount)
+ cesaStats.maxReqCount = (cesaQueueDepth - cesaReqResources);
+/* #endif CESA_DEBUG */
+
+ cesaLastSid = sid;
+
+#if (MV_CESA_VERSION >= 3)
+ /* Are we within chain bounderies and follows the first request ? */
+ if((chainReqNum > 0) && (chainReqNum < MAX_CESA_CHAIN_LENGTH)) {
+ if(chainIndex) {
+ pFromReq = MV_CESA_REQ_PREV_PTR(pReq);
+ pToReq = pReq;
+ pReq->state = MV_CESA_CHAIN;
+ /* assume concatenating is possible */
+ pFromReq->dma[pFromReq->frags.numFrag-1].pDmaLast->phyNextDescPtr =
+ MV_32BIT_LE(mvCesaVirtToPhys(&pToReq->dmaDescBuf, pToReq->dma[0].pDmaFirst));
+ mvOsCacheFlush(NULL, pFromReq->dma[pFromReq->frags.numFrag-1].pDmaLast, sizeof(MV_DMA_DESC));
+
+ /* align active & next pointers */
+ if(pNextActiveChain->state != MV_CESA_PENDING)
+ pEndCurrChain = pNextActiveChain = MV_CESA_REQ_NEXT_PTR(pReq);
+ }
+ else { /* we have only one chain, start new one */
+ chainReqNum = 0;
+ chainIndex++;
+ /* align active & next pointers */
+ if(pNextActiveChain->state != MV_CESA_PENDING)
+ pEndCurrChain = pNextActiveChain = pReq;
+ }
+ }
+ else {
+ /* In case we concatenate full chain */
+ if(chainReqNum == MAX_CESA_CHAIN_LENGTH) {
+ chainIndex++;
+ if(pNextActiveChain->state != MV_CESA_PENDING)
+ pEndCurrChain = pNextActiveChain = pReq;
+ chainReqNum = 0;
+ }
+
+ pReq = pCesaReqProcess;
+ if(pReq->state == MV_CESA_PENDING) {
+ pNextActiveChain = pReq;
+ pEndCurrChain = MV_CESA_REQ_NEXT_PTR(pReq);
+ /* Start Process new request */
+ mvCesaReqProcessStart(pReq);
+ }
+ }
+
+ chainReqNum++;
+
+ if((chainIndex < MAX_CESA_CHAIN_LENGTH) && (chainReqNum > cesaStats.maxChainUsage))
+ cesaStats.maxChainUsage = chainReqNum;
+
+#else
+
+ /* Check status of CESA channels and process requests if possible */
+ pReq = pCesaReqProcess;
+ if(pReq->state == MV_CESA_PENDING)
+ {
+ /* Start Process new request */
+ mvCesaReqProcessStart(pReq);
+ }
+#endif
+ /* If request queue became FULL - return MV_NO_MORE */
+ if(cesaReqResources == 0)
+ return MV_NO_MORE;
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvCesaReadyGet - Get crypto request that processing is finished
+*
+* DESCRIPTION:
+* This function complete request processing and return ready request to
+* caller. To don't miss interrupts the caller must call this function
+* while MV_OK or MV_TERMINATE values returned.
+*
+* INPUT:
+* MV_U32 chanMap - map of CESA channels finished thier job
+* accordingly with CESA Cause register.
+* MV_CESA_RESULT* pResult - pointer to structure contains information
+* about ready request. It includes pointer to
+* user private structure "pReqPrv", session identifier
+* for this request "sessionId" and return code.
+* Return code set to MV_FAIL if calculated digest value
+* on decode direction is different than digest value
+* in the packet.
+*
+* RETURN:
+* MV_OK - Success, ready request is returned.
+* MV_NOT_READY - Next request is not ready yet. New interrupt will
+* be generated for futher request processing.
+* MV_EMPTY - There is no more request for processing.
+* MV_BUSY - Fragmented request is not ready yet.
+* MV_TERMINATE - Call this function once more to complete processing
+* of fragmented request.
+*
+*******************************************************************************/
+MV_STATUS mvCesaReadyGet(MV_CESA_RESULT* pResult)
+{
+ MV_STATUS status, readyStatus = MV_NOT_READY;
+ MV_U32 statusReg;
+ MV_CESA_REQ* pReq;
+ MV_CESA_SA* pSA;
+
+#if (MV_CESA_VERSION >= 3)
+ if(isFirstReq == MV_TRUE) {
+ if(chainIndex == 0)
+ chainReqNum = 0;
+
+ isFirstReq = MV_FALSE;
+
+ if(pNextActiveChain->state == MV_CESA_PENDING) {
+ /* Start request Process */
+ mvCesaReqProcessStart(pNextActiveChain);
+ pEndCurrChain = pNextActiveChain;
+ if(chainIndex > 0)
+ chainIndex--;
+ /* Update pNextActiveChain to next chain head */
+ while(pNextActiveChain->state == MV_CESA_CHAIN)
+ pNextActiveChain = MV_CESA_REQ_NEXT_PTR(pNextActiveChain);
+ }
+ }
+
+ /* Check if there are more processed requests - can we remove pEndCurrChain ??? */
+ if(pCesaReqProcess == pEndCurrChain) {
+ isFirstReq = MV_TRUE;
+ pEndCurrChain = pNextActiveChain;
+#else
+ if(pCesaReqProcess->state != MV_CESA_PROCESS) {
+#endif
+ return MV_EMPTY;
+ }
+
+#ifdef CESA_DEBUG
+ statusReg = MV_REG_READ(MV_CESA_STATUS_REG);
+ if( statusReg & MV_CESA_STATUS_ACTIVE_MASK )
+ {
+ mvOsPrintf("mvCesaReadyGet: Not Ready, Status = 0x%x\n", statusReg);
+ cesaStats.notReadyCount++;
+ return MV_NOT_READY;
+ }
+#endif /* CESA_DEBUG */
+
+ cesaStats.readyCount++;
+
+ pReq = pCesaReqProcess;
+ pSA = &pCesaSAD[pReq->pCmd->sessionId];
+
+ pResult->retCode = MV_OK;
+ if(pReq->fragMode != MV_CESA_FRAG_NONE)
+ {
+ MV_U8* pNewDigest;
+ int frag;
+#if (MV_CESA_VERSION >= 3)
+ pReq->frags.nextFrag = 1;
+ while(pReq->frags.nextFrag <= pReq->frags.numFrag) {
+#endif
+ frag = (pReq->frags.nextFrag - 1);
+
+ /* Restore DMA descriptor list */
+ pReq->dma[frag].pDmaLast->phyNextDescPtr =
+ MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pReq->dma[frag].pDmaLast[1]));
+ pReq->dma[frag].pDmaLast = NULL;
+
+ /* Special processing for finished fragmented request */
+ if(pReq->frags.nextFrag >= pReq->frags.numFrag)
+ {
+ mvCesaMbufCacheUnmap(pReq->pCmd->pDst, 0, pReq->pCmd->pDst->mbufSize);
+
+ /* Fragmented packet is ready */
+ if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+ {
+ int macDataSize = pReq->pCmd->macLength - pReq->frags.macSize;
+
+ if(macDataSize != 0)
+ {
+ /* Calculate all other blocks by SW */
+ mvCesaFragAuthComplete(pReq, pSA, macDataSize);
+ }
+
+ /* Copy new digest from SRAM to the Destination buffer */
+ pNewDigest = cesaSramVirtPtr->buf + pReq->frags.newDigestOffset;
+ status = mvCesaCopyToMbuf(pNewDigest, pReq->pCmd->pDst,
+ pReq->pCmd->digestOffset, pSA->digestSize);
+
+ /* For decryption: Compare new digest value with original one */
+ if((pSA->config & MV_CESA_DIRECTION_MASK) ==
+ (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT))
+ {
+ if( memcmp(pNewDigest, pReq->frags.orgDigest, pSA->digestSize) != 0)
+ {
+/*
+ mvOsPrintf("Digest error: chan=%d, newDigest=%p, orgDigest=%p, status = 0x%x\n",
+ chan, pNewDigest, pReq->frags.orgDigest, MV_REG_READ(MV_CESA_STATUS_REG));
+*/
+ /* Signiture verification is failed */
+ pResult->retCode = MV_FAIL;
+ }
+ }
+ }
+ readyStatus = MV_OK;
+ }
+#if (MV_CESA_VERSION >= 3)
+ pReq->frags.nextFrag++;
+ }
+#endif
+ }
+ else
+ {
+ mvCesaMbufCacheUnmap(pReq->pCmd->pDst, 0, pReq->pCmd->pDst->mbufSize);
+
+ /* Restore DMA descriptor list */
+ pReq->dma[0].pDmaLast->phyNextDescPtr =
+ MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pReq->dma[0].pDmaLast[1]));
+ pReq->dma[0].pDmaLast = NULL;
+ if( ((pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) &&
+ ((pSA->config & MV_CESA_DIRECTION_MASK) ==
+ (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT)) )
+ {
+ /* For AUTH on decode : Check Digest result in Status register */
+ statusReg = MV_REG_READ(MV_CESA_STATUS_REG);
+ if(statusReg & MV_CESA_STATUS_DIGEST_ERR_MASK)
+ {
+/*
+ mvOsPrintf("Digest error: chan=%d, status = 0x%x\n",
+ chan, statusReg);
+*/
+ /* Signiture verification is failed */
+ pResult->retCode = MV_FAIL;
+ }
+ }
+ readyStatus = MV_OK;
+ }
+
+ if(readyStatus == MV_OK)
+ {
+ /* If Request is ready - Prepare pResult structure */
+ pResult->pReqPrv = pReq->pCmd->pReqPrv;
+ pResult->sessionId = pReq->pCmd->sessionId;
+
+ pReq->state = MV_CESA_IDLE;
+ pCesaReqProcess = MV_CESA_REQ_NEXT_PTR(pReq);
+ cesaReqResources++;
+
+ if(pSA->ctrMode)
+ {
+ /* For AES CTR mode - complete processing and free allocated resources */
+ mvCesaCtrModeComplete(pReq->pOrgCmd, pReq->pCmd);
+ mvCesaCtrModeFinish(pReq->pCmd);
+ pReq->pOrgCmd = NULL;
+ }
+ }
+
+#if (MV_CESA_VERSION < 3)
+ if(pCesaReqProcess->state == MV_CESA_PROCESS)
+ {
+ /* Start request Process */
+ mvCesaReqProcessStart(pCesaReqProcess);
+ if(readyStatus == MV_NOT_READY)
+ readyStatus = MV_BUSY;
+ }
+ else if(pCesaReqProcess != pCesaReqEmpty)
+ {
+ /* Start process new request from the queue */
+ mvCesaReqProcessStart(pCesaReqProcess);
+ }
+#endif
+ return readyStatus;
+}
+
+/***************** Functions to work with CESA_MBUF structure ******************/
+
+/*******************************************************************************
+* mvCesaMbufOffset - Locate offset in the Mbuf structure
+*
+* DESCRIPTION:
+* This function locates offset inside Multi-Bufeer structure.
+* It get fragment number and place in the fragment where the offset
+* is located.
+*
+*
+* INPUT:
+* MV_CESA_MBUF* pMbuf - Pointer to multi-buffer structure
+* int offset - Offset from the beginning of the data presented by
+* the Mbuf structure.
+*
+* OUTPUT:
+* int* pBufOffset - Offset from the beginning of the fragment where
+* the offset is located.
+*
+* RETURN:
+* int - Number of fragment, where the offset is located\
+*
+*******************************************************************************/
+int mvCesaMbufOffset(MV_CESA_MBUF* pMbuf, int offset, int* pBufOffset)
+{
+ int frag = 0;
+
+ while(offset > 0)
+ {
+ if(frag >= pMbuf->numFrags)
+ {
+ mvOsPrintf("mvCesaMbufOffset: Error: frag (%d) > numFrags (%d)\n",
+ frag, pMbuf->numFrags);
+ return MV_INVALID;
+ }
+ if(offset < pMbuf->pFrags[frag].bufSize)
+ {
+ break;
+ }
+ offset -= pMbuf->pFrags[frag].bufSize;
+ frag++;
+ }
+ if(pBufOffset != NULL)
+ *pBufOffset = offset;
+
+ return frag;
+}
+
+/*******************************************************************************
+* mvCesaCopyFromMbuf - Copy data from the Mbuf structure to continuous buffer
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_U8* pDstBuf - Pointer to continuous buffer, where data is
+* copied to.
+* MV_CESA_MBUF* pSrcMbuf - Pointer to multi-buffer structure where data is
+* copied from.
+* int offset - Offset in the Mbuf structure where located first
+* byte of data should be copied.
+* int size - Size of data should be copied
+*
+* RETURN:
+* MV_OK - Success, all data is copied successfully.
+* MV_OUT_OF_RANGE - Failed, offset is out of Multi-buffer data range.
+* No data is copied.
+* MV_EMPTY - Multi-buffer structure has not enough data to copy
+* Data from the offset to end of Mbuf data is copied.
+*
+*******************************************************************************/
+MV_STATUS mvCesaCopyFromMbuf(MV_U8* pDstBuf, MV_CESA_MBUF* pSrcMbuf,
+ int offset, int size)
+{
+ int frag, fragOffset, bufSize;
+ MV_U8* pBuf;
+
+ if(size == 0)
+ return MV_OK;
+
+ frag = mvCesaMbufOffset(pSrcMbuf, offset, &fragOffset);
+ if(frag == MV_INVALID)
+ {
+ mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+ return MV_OUT_OF_RANGE;
+ }
+
+ bufSize = pSrcMbuf->pFrags[frag].bufSize - fragOffset;
+ pBuf = pSrcMbuf->pFrags[frag].bufVirtPtr + fragOffset;
+ while(MV_TRUE)
+ {
+ if(size <= bufSize)
+ {
+ memcpy(pDstBuf, pBuf, size);
+ return MV_OK;
+ }
+ memcpy(pDstBuf, pBuf, bufSize);
+ size -= bufSize;
+ frag++;
+ pDstBuf += bufSize;
+ if(frag >= pSrcMbuf->numFrags)
+ break;
+
+ bufSize = pSrcMbuf->pFrags[frag].bufSize;
+ pBuf = pSrcMbuf->pFrags[frag].bufVirtPtr;
+ }
+ mvOsPrintf("mvCesaCopyFromMbuf: Mbuf is EMPTY - %d bytes isn't copied\n",
+ size);
+ return MV_EMPTY;
+}
+
+/*******************************************************************************
+* mvCesaCopyToMbuf - Copy data from continuous buffer to the Mbuf structure
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_U8* pSrcBuf - Pointer to continuous buffer, where data is
+* copied from.
+* MV_CESA_MBUF* pDstMbuf - Pointer to multi-buffer structure where data is
+* copied to.
+* int offset - Offset in the Mbuf structure where located first
+* byte of data should be copied.
+* int size - Size of data should be copied
+*
+* RETURN:
+* MV_OK - Success, all data is copied successfully.
+* MV_OUT_OF_RANGE - Failed, offset is out of Multi-buffer data range.
+* No data is copied.
+* MV_FULL - Multi-buffer structure has not enough place to copy
+* all data. Data from the offset to end of Mbuf data
+* is copied.
+*
+*******************************************************************************/
+MV_STATUS mvCesaCopyToMbuf(MV_U8* pSrcBuf, MV_CESA_MBUF* pDstMbuf,
+ int offset, int size)
+{
+ int frag, fragOffset, bufSize;
+ MV_U8* pBuf;
+
+ if(size == 0)
+ return MV_OK;
+
+ frag = mvCesaMbufOffset(pDstMbuf, offset, &fragOffset);
+ if(frag == MV_INVALID)
+ {
+ mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+ return MV_OUT_OF_RANGE;
+ }
+
+ bufSize = pDstMbuf->pFrags[frag].bufSize - fragOffset;
+ pBuf = pDstMbuf->pFrags[frag].bufVirtPtr + fragOffset;
+ while(MV_TRUE)
+ {
+ if(size <= bufSize)
+ {
+ memcpy(pBuf, pSrcBuf, size);
+ return MV_OK;
+ }
+ memcpy(pBuf, pSrcBuf, bufSize);
+ size -= bufSize;
+ frag++;
+ pSrcBuf += bufSize;
+ if(frag >= pDstMbuf->numFrags)
+ break;
+
+ bufSize = pDstMbuf->pFrags[frag].bufSize;
+ pBuf = pDstMbuf->pFrags[frag].bufVirtPtr;
+ }
+ mvOsPrintf("mvCesaCopyToMbuf: Mbuf is FULL - %d bytes isn't copied\n",
+ size);
+ return MV_FULL;
+}
+
+/*******************************************************************************
+* mvCesaMbufCopy - Copy data from one Mbuf structure to the other Mbuf structure
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*
+* MV_CESA_MBUF* pDstMbuf - Pointer to multi-buffer structure where data is
+* copied to.
+* int dstMbufOffset - Offset in the dstMbuf structure where first byte
+* of data should be copied to.
+* MV_CESA_MBUF* pSrcMbuf - Pointer to multi-buffer structure where data is
+* copied from.
+* int srcMbufOffset - Offset in the srcMbuf structure where first byte
+* of data should be copied from.
+* int size - Size of data should be copied
+*
+* RETURN:
+* MV_OK - Success, all data is copied successfully.
+* MV_OUT_OF_RANGE - Failed, srcMbufOffset or dstMbufOffset is out of
+* srcMbuf or dstMbuf structure correspondently.
+* No data is copied.
+* MV_BAD_SIZE - srcMbuf or dstMbuf structure is too small to copy
+* all data. Partial data is copied
+*
+*******************************************************************************/
+MV_STATUS mvCesaMbufCopy(MV_CESA_MBUF* pMbufDst, int dstMbufOffset,
+ MV_CESA_MBUF* pMbufSrc, int srcMbufOffset, int size)
+{
+ int srcFrag, dstFrag, srcSize, dstSize, srcOffset, dstOffset;
+ int copySize;
+ MV_U8 *pSrc, *pDst;
+
+ if(size == 0)
+ return MV_OK;
+
+ srcFrag = mvCesaMbufOffset(pMbufSrc, srcMbufOffset, &srcOffset);
+ if(srcFrag == MV_INVALID)
+ {
+ mvOsPrintf("CESA srcMbuf Error: offset (%d) out of range\n", srcMbufOffset);
+ return MV_OUT_OF_RANGE;
+ }
+ pSrc = pMbufSrc->pFrags[srcFrag].bufVirtPtr + srcOffset;
+ srcSize = pMbufSrc->pFrags[srcFrag].bufSize - srcOffset;
+
+ dstFrag = mvCesaMbufOffset(pMbufDst, dstMbufOffset, &dstOffset);
+ if(dstFrag == MV_INVALID)
+ {
+ mvOsPrintf("CESA dstMbuf Error: offset (%d) out of range\n", dstMbufOffset);
+ return MV_OUT_OF_RANGE;
+ }
+ pDst = pMbufDst->pFrags[dstFrag].bufVirtPtr + dstOffset;
+ dstSize = pMbufDst->pFrags[dstFrag].bufSize - dstOffset;
+
+ while(size > 0)
+ {
+ copySize = MV_MIN(srcSize, dstSize);
+ if(size <= copySize)
+ {
+ memcpy(pDst, pSrc, size);
+ return MV_OK;
+ }
+ memcpy(pDst, pSrc, copySize);
+ size -= copySize;
+ srcSize -= copySize;
+ dstSize -= copySize;
+
+ if(srcSize == 0)
+ {
+ srcFrag++;
+ if(srcFrag >= pMbufSrc->numFrags)
+ break;
+
+ pSrc = pMbufSrc->pFrags[srcFrag].bufVirtPtr;
+ srcSize = pMbufSrc->pFrags[srcFrag].bufSize;
+ }
+
+ if(dstSize == 0)
+ {
+ dstFrag++;
+ if(dstFrag >= pMbufDst->numFrags)
+ break;
+
+ pDst = pMbufDst->pFrags[dstFrag].bufVirtPtr;
+ dstSize = pMbufDst->pFrags[dstFrag].bufSize;
+ }
+ }
+ mvOsPrintf("mvCesaMbufCopy: BAD size - %d bytes isn't copied\n",
+ size);
+
+ return MV_BAD_SIZE;
+}
+
+static MV_STATUS mvCesaMbufCacheUnmap(MV_CESA_MBUF* pMbuf, int offset, int size)
+{
+ int frag, fragOffset, bufSize;
+ MV_U8* pBuf;
+
+ if(size == 0)
+ return MV_OK;
+
+ frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset);
+ if(frag == MV_INVALID)
+ {
+ mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+ return MV_OUT_OF_RANGE;
+ }
+
+ bufSize = pMbuf->pFrags[frag].bufSize - fragOffset;
+ pBuf = pMbuf->pFrags[frag].bufVirtPtr + fragOffset;
+ while(MV_TRUE)
+ {
+ if(size <= bufSize)
+ {
+ mvOsCacheUnmap(NULL, mvOsIoVirtToPhy(NULL, pBuf), size);
+ return MV_OK;
+ }
+
+ mvOsCacheUnmap(NULL, mvOsIoVirtToPhy(NULL, pBuf), bufSize);
+ size -= bufSize;
+ frag++;
+ if(frag >= pMbuf->numFrags)
+ break;
+
+ bufSize = pMbuf->pFrags[frag].bufSize;
+ pBuf = pMbuf->pFrags[frag].bufVirtPtr;
+ }
+ mvOsPrintf("%s: Mbuf is FULL - %d bytes isn't Unmapped\n",
+ __FUNCTION__, size);
+ return MV_FULL;
+}
+
+
+/*************************************** Local Functions ******************************/
+
+/*******************************************************************************
+* mvCesaFragReqProcess - Process fragmented request
+*
+* DESCRIPTION:
+* This function processes a fragment of fragmented request (First, Middle or Last)
+*
+*
+* INPUT:
+* MV_CESA_REQ* pReq - Pointer to the request in the request queue.
+*
+* RETURN:
+* MV_OK - The fragment is successfully passed to HW for processing.
+* MV_TERMINATE - Means, that HW finished its work on this packet and no more
+* interrupts will be generated for this request.
+* Function mvCesaReadyGet() must be called to complete request
+* processing and get request result.
+*
+*******************************************************************************/
+static MV_STATUS mvCesaFragReqProcess(MV_CESA_REQ* pReq, MV_U8 frag)
+{
+ int i, copySize, cryptoDataSize, macDataSize, sid;
+ int cryptoIvOffset, digestOffset;
+ MV_U32 config;
+ MV_CESA_COMMAND* pCmd = pReq->pCmd;
+ MV_CESA_SA* pSA;
+ MV_CESA_MBUF* pMbuf;
+ MV_DMA_DESC* pDmaDesc = pReq->dma[frag].pDmaFirst;
+ MV_U8* pSramBuf = cesaSramVirtPtr->buf;
+ int macTotalLen = 0;
+ int fixOffset, cryptoOffset, macOffset;
+
+ cesaStats.fragCount++;
+
+ sid = pReq->pCmd->sessionId;
+
+ pSA = &pCesaSAD[sid];
+
+ cryptoIvOffset = digestOffset = 0;
+ i = macDataSize = 0;
+ cryptoDataSize = 0;
+
+ /* First fragment processing */
+ if(pReq->fragMode == MV_CESA_FRAG_FIRST)
+ {
+ /* pReq->frags monitors processing of fragmented request between fragments */
+ pReq->frags.bufOffset = 0;
+ pReq->frags.cryptoSize = 0;
+ pReq->frags.macSize = 0;
+
+ config = pSA->config | (MV_CESA_FRAG_FIRST << MV_CESA_FRAG_MODE_OFFSET);
+
+ /* fixOffset can be not equal to zero only for FIRST fragment */
+ fixOffset = pReq->fixOffset;
+ /* For FIRST fragment crypto and mac offsets are taken from pCmd */
+ cryptoOffset = pCmd->cryptoOffset;
+ macOffset = pCmd->macOffset;
+
+ copySize = sizeof(cesaSramVirtPtr->buf) - pReq->fixOffset;
+
+ /* Find fragment size: Must meet all requirements for CRYPTO and MAC
+ * cryptoDataSize - size of data will be encrypted/decrypted in this fragment
+ * macDataSize - size of data will be signed/verified in this fragment
+ * copySize - size of data will be copied from srcMbuf to SRAM and
+ * back to dstMbuf for this fragment
+ */
+ mvCesaFragSizeFind(pSA, pReq, cryptoOffset, macOffset,
+ ©Size, &cryptoDataSize, &macDataSize);
+
+ if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET))
+ {
+ /* CryptoIV special processing */
+ if( (pSA->config & MV_CESA_CRYPTO_MODE_MASK) ==
+ (MV_CESA_CRYPTO_CBC << MV_CESA_CRYPTO_MODE_BIT) )
+ {
+ /* In CBC mode for encode direction when IV from user */
+ if( (pCmd->ivFromUser) &&
+ ((pSA->config & MV_CESA_DIRECTION_MASK) ==
+ (MV_CESA_DIR_ENCODE << MV_CESA_DIRECTION_BIT)) )
+ {
+
+ /* For Crypto Encode in CBC mode HW always takes IV from SRAM IVPointer,
+ * (not from IVBufPointer). So when ivFromUser==1, we should copy IV from user place
+ * in the buffer to SRAM IVPointer
+ */
+ i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i],
+ MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush);
+ }
+
+ /* Special processing when IV is not located in the first fragment */
+ if(pCmd->ivOffset > (copySize - pSA->cryptoIvSize))
+ {
+ /* Prepare dummy place for cryptoIV in SRAM */
+ cryptoIvOffset = cesaSramVirtPtr->tempCryptoIV - mvCesaSramAddrGet();
+
+ /* For Decryption: Copy IV value from pCmd->ivOffset to Special SRAM place */
+ if((pSA->config & MV_CESA_DIRECTION_MASK) ==
+ (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT))
+ {
+ i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->tempCryptoIV, &pDmaDesc[i],
+ MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush);
+ }
+ else
+ {
+ /* For Encryption when IV is NOT from User: */
+ /* Copy IV from SRAM to buffer (pCmd->ivOffset) */
+ if(pCmd->ivFromUser == 0)
+ {
+ /* copy IV value from cryptoIV to Buffer (pCmd->ivOffset) */
+ i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i],
+ MV_TRUE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush);
+ }
+ }
+ }
+ else
+ {
+ cryptoIvOffset = pCmd->ivOffset;
+ }
+ }
+ }
+
+ if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+ {
+ /* MAC digest special processing on Decode direction */
+ if((pSA->config & MV_CESA_DIRECTION_MASK) ==
+ (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT))
+ {
+ /* Save digest from pCmd->digestOffset */
+ mvCesaCopyFromMbuf(pReq->frags.orgDigest,
+ pCmd->pSrc, pCmd->digestOffset, pSA->digestSize);
+
+ /* If pCmd->digestOffset is not located on the first */
+ if(pCmd->digestOffset > (copySize - pSA->digestSize))
+ {
+ MV_U8 digestZero[MV_CESA_MAX_DIGEST_SIZE];
+
+ /* Set zeros to pCmd->digestOffset (DRAM) */
+ memset(digestZero, 0, MV_CESA_MAX_DIGEST_SIZE);
+ mvCesaCopyToMbuf(digestZero, pCmd->pSrc, pCmd->digestOffset, pSA->digestSize);
+
+ /* Prepare dummy place for digest in SRAM */
+ digestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet();
+ }
+ else
+ {
+ digestOffset = pCmd->digestOffset;
+ }
+ }
+ }
+ /* Update SA in SRAM */
+ if(cesaLastSid != sid)
+ {
+ mvCesaSramSaUpdate(sid, &pDmaDesc[i]);
+ i++;
+ }
+
+ pReq->fragMode = MV_CESA_FRAG_MIDDLE;
+ }
+ else
+ {
+ /* Continue fragment */
+ fixOffset = 0;
+ cryptoOffset = 0;
+ macOffset = 0;
+ if( (pCmd->pSrc->mbufSize - pReq->frags.bufOffset) <= sizeof(cesaSramVirtPtr->buf))
+ {
+ /* Last fragment */
+ config = pSA->config | (MV_CESA_FRAG_LAST << MV_CESA_FRAG_MODE_OFFSET);
+ pReq->fragMode = MV_CESA_FRAG_LAST;
+ copySize = pCmd->pSrc->mbufSize - pReq->frags.bufOffset;
+
+ if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+ {
+ macDataSize = pCmd->macLength - pReq->frags.macSize;
+
+ /* If pCmd->digestOffset is not located on last fragment */
+ if(pCmd->digestOffset < pReq->frags.bufOffset)
+ {
+ /* Prepare dummy place for digest in SRAM */
+ digestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet();
+ }
+ else
+ {
+ digestOffset = pCmd->digestOffset - pReq->frags.bufOffset;
+ }
+ pReq->frags.newDigestOffset = digestOffset;
+ macTotalLen = pCmd->macLength;
+
+ /* HW can't calculate the Digest correctly for fragmented packets
+ * in the following cases:
+ * - MV88F5182 ||
+ * - MV88F5181L when total macLength more that 16 Kbytes ||
+ * - total macLength more that 64 Kbytes
+ */
+ if( (mvCtrlModelGet() == MV_5182_DEV_ID) ||
+ ( (mvCtrlModelGet() == MV_5181_DEV_ID) &&
+ (mvCtrlRevGet() >= MV_5181L_A0_REV) &&
+ (pCmd->macLength >= (1 << 14)) ) )
+ {
+ return MV_TERMINATE;
+ }
+ }
+ if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) )
+ {
+ cryptoDataSize = pCmd->cryptoLength - pReq->frags.cryptoSize;
+ }
+
+ /* cryptoIvOffset - don't care */
+ }
+ else
+ {
+ /* WA for MV88F5182 SHA1 and MD5 fragmentation mode */
+ if( (mvCtrlModelGet() == MV_5182_DEV_ID) &&
+ (((pSA->config & MV_CESA_MAC_MODE_MASK) ==
+ (MV_CESA_MAC_MD5 << MV_CESA_MAC_MODE_OFFSET)) ||
+ ((pSA->config & MV_CESA_MAC_MODE_MASK) ==
+ (MV_CESA_MAC_SHA1 << MV_CESA_MAC_MODE_OFFSET))) )
+ {
+ pReq->frags.newDigestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet();
+ pReq->fragMode = MV_CESA_FRAG_LAST;
+
+ return MV_TERMINATE;
+ }
+ /* Middle fragment */
+ config = pSA->config | (MV_CESA_FRAG_MIDDLE << MV_CESA_FRAG_MODE_OFFSET);
+ copySize = sizeof(cesaSramVirtPtr->buf);
+ /* digestOffset and cryptoIvOffset - don't care */
+
+ /* Find fragment size */
+ mvCesaFragSizeFind(pSA, pReq, cryptoOffset, macOffset,
+ ©Size, &cryptoDataSize, &macDataSize);
+ }
+ }
+ /********* Prepare DMA descriptors to copy from pSrc to SRAM *********/
+ pMbuf = pCmd->pSrc;
+ i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i],
+ MV_FALSE, pReq->frags.bufOffset, copySize, pCmd->skipFlush);
+
+ /* Prepare CESA descriptor to copy from DRAM to SRAM by DMA */
+ mvCesaSramDescrBuild(config, frag,
+ cryptoOffset + fixOffset, cryptoIvOffset + fixOffset,
+ cryptoDataSize, macOffset + fixOffset,
+ digestOffset + fixOffset, macDataSize, macTotalLen,
+ pReq, &pDmaDesc[i]);
+ i++;
+
+ /* Add special descriptor Ownership for CPU */
+ pDmaDesc[i].byteCnt = 0;
+ pDmaDesc[i].phySrcAdd = 0;
+ pDmaDesc[i].phyDestAdd = 0;
+ i++;
+
+ /********* Prepare DMA descriptors to copy from SRAM to pDst *********/
+ pMbuf = pCmd->pDst;
+ i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i],
+ MV_TRUE, pReq->frags.bufOffset, copySize, pCmd->skipFlush);
+
+ /* Next field of Last DMA descriptor must be NULL */
+ pDmaDesc[i-1].phyNextDescPtr = 0;
+ pReq->dma[frag].pDmaLast = &pDmaDesc[i-1];
+ mvOsCacheFlush(NULL, pReq->dma[frag].pDmaFirst,
+ i*sizeof(MV_DMA_DESC));
+
+ /*mvCesaDebugDescriptor(&cesaSramVirtPtr->desc[frag]);*/
+
+ pReq->frags.bufOffset += copySize;
+ pReq->frags.cryptoSize += cryptoDataSize;
+ pReq->frags.macSize += macDataSize;
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvCesaReqProcess - Process regular (Non-fragmented) request
+*
+* DESCRIPTION:
+* This function processes the whole (not fragmented) request
+*
+* INPUT:
+* MV_CESA_REQ* pReq - Pointer to the request in the request queue.
+*
+* RETURN:
+* MV_OK - The request is successfully passed to HW for processing.
+* Other - Failure. The request will not be processed
+*
+*******************************************************************************/
+static MV_STATUS mvCesaReqProcess(MV_CESA_REQ* pReq)
+{
+ MV_CESA_MBUF *pMbuf;
+ MV_DMA_DESC *pDmaDesc;
+ MV_U8 *pSramBuf;
+ int sid, i, fixOffset;
+ MV_CESA_SA *pSA;
+ MV_CESA_COMMAND *pCmd = pReq->pCmd;
+
+ cesaStats.procCount++;
+
+ sid = pCmd->sessionId;
+ pSA = &pCesaSAD[sid];
+ pDmaDesc = pReq->dma[0].pDmaFirst;
+ pSramBuf = cesaSramVirtPtr->buf;
+ fixOffset = pReq->fixOffset;
+
+/*
+ mvOsPrintf("mvCesaReqProcess: sid=%d, pSA=%p, pDmaDesc=%p, pSramBuf=%p\n",
+ sid, pSA, pDmaDesc, pSramBuf);
+*/
+ i = 0;
+
+ /* Crypto IV Special processing in CBC mode for Encryption direction */
+ if( ((pSA->config & MV_CESA_OPERATION_MASK) != (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) &&
+ ((pSA->config & MV_CESA_CRYPTO_MODE_MASK) == (MV_CESA_CRYPTO_CBC << MV_CESA_CRYPTO_MODE_BIT)) &&
+ ((pSA->config & MV_CESA_DIRECTION_MASK) == (MV_CESA_DIR_ENCODE << MV_CESA_DIRECTION_BIT)) &&
+ (pCmd->ivFromUser) )
+ {
+ /* For Crypto Encode in CBC mode HW always takes IV from SRAM IVPointer,
+ * (not from IVBufPointer). So when ivFromUser==1, we should copy IV from user place
+ * in the buffer to SRAM IVPointer
+ */
+ i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i],
+ MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush);
+ }
+
+ /* Update SA in SRAM */
+ if(cesaLastSid != sid)
+ {
+ mvCesaSramSaUpdate(sid, &pDmaDesc[i]);
+ i++;
+ }
+
+ /********* Prepare DMA descriptors to copy from pSrc to SRAM *********/
+ pMbuf = pCmd->pSrc;
+ i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i],
+ MV_FALSE, 0, pMbuf->mbufSize, pCmd->skipFlush);
+
+ /* Prepare Security Accelerator descriptor to SRAM words 0 - 7 */
+ mvCesaSramDescrBuild(pSA->config, 0, pCmd->cryptoOffset + fixOffset,
+ pCmd->ivOffset + fixOffset, pCmd->cryptoLength,
+ pCmd->macOffset + fixOffset, pCmd->digestOffset + fixOffset,
+ pCmd->macLength, pCmd->macLength, pReq, &pDmaDesc[i]);
+ i++;
+
+ /* Add special descriptor Ownership for CPU */
+ pDmaDesc[i].byteCnt = 0;
+ pDmaDesc[i].phySrcAdd = 0;
+ pDmaDesc[i].phyDestAdd = 0;
+ i++;
+
+ /********* Prepare DMA descriptors to copy from SRAM to pDst *********/
+ pMbuf = pCmd->pDst;
+ i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i],
+ MV_TRUE, 0, pMbuf->mbufSize, pCmd->skipFlush);
+
+ /* Next field of Last DMA descriptor must be NULL */
+ pDmaDesc[i-1].phyNextDescPtr = 0;
+ pReq->dma[0].pDmaLast = &pDmaDesc[i-1];
+ mvOsCacheFlush(NULL, pReq->dma[0].pDmaFirst, i*sizeof(MV_DMA_DESC));
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvCesaSramDescrBuild - Set CESA descriptor in SRAM
+*
+* DESCRIPTION:
+* This function builds CESA descriptor in SRAM from all Command parameters
+*
+*
+* INPUT:
+* int chan - CESA channel uses the descriptor
+* MV_U32 config - 32 bits of WORD_0 in CESA descriptor structure
+* int cryptoOffset - Offset from the beginning of SRAM buffer where
+* data for encryption/decription is started.
+* int ivOffset - Offset of crypto IV from the SRAM base. Valid only
+* for first fragment.
+* int cryptoLength - Size (in bytes) of data for encryption/descryption
+* operation on this fragment.
+* int macOffset - Offset from the beginning of SRAM buffer where
+* data for Authentication is started
+* int digestOffset - Offset from the beginning of SRAM buffer where
+* digest is located. Valid for first and last fragments.
+* int macLength - Size (in bytes) of data for Authentication
+* operation on this fragment.
+* int macTotalLen - Toatl size (in bytes) of data for Authentication
+* operation on the whole request (packet). Valid for
+* last fragment only.
+*
+* RETURN: None
+*
+*******************************************************************************/
+static void mvCesaSramDescrBuild(MV_U32 config, int frag,
+ int cryptoOffset, int ivOffset, int cryptoLength,
+ int macOffset, int digestOffset, int macLength,
+ int macTotalLen, MV_CESA_REQ* pReq, MV_DMA_DESC* pDmaDesc)
+{
+ MV_CESA_DESC* pCesaDesc = &pReq->pCesaDesc[frag];
+ MV_CESA_DESC* pSramDesc = pSramDesc = &cesaSramVirtPtr->desc;
+ MV_U16 sramBufOffset = (MV_U16)((MV_U8*)cesaSramVirtPtr->buf - mvCesaSramAddrGet());
+
+ pCesaDesc->config = MV_32BIT_LE(config);
+
+ if( (config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) )
+ {
+ /* word 1 */
+ pCesaDesc->cryptoSrcOffset = MV_16BIT_LE(sramBufOffset + cryptoOffset);
+ pCesaDesc->cryptoDstOffset = MV_16BIT_LE(sramBufOffset + cryptoOffset);
+ /* word 2 */
+ pCesaDesc->cryptoDataLen = MV_16BIT_LE(cryptoLength);
+ /* word 3 */
+ pCesaDesc->cryptoKeyOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.cryptoKey -
+ mvCesaSramAddrGet()));
+ /* word 4 */
+ pCesaDesc->cryptoIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->cryptoIV -
+ mvCesaSramAddrGet()));
+ pCesaDesc->cryptoIvBufOffset = MV_16BIT_LE(sramBufOffset + ivOffset);
+ }
+
+ if( (config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+ {
+ /* word 5 */
+ pCesaDesc->macSrcOffset = MV_16BIT_LE(sramBufOffset + macOffset);
+ pCesaDesc->macTotalLen = MV_16BIT_LE(macTotalLen);
+
+ /* word 6 */
+ pCesaDesc->macDigestOffset = MV_16BIT_LE(sramBufOffset + digestOffset);
+ pCesaDesc->macDataLen = MV_16BIT_LE(macLength);
+
+ /* word 7 */
+ pCesaDesc->macInnerIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.macInnerIV -
+ mvCesaSramAddrGet()));
+ pCesaDesc->macOuterIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.macOuterIV -
+ mvCesaSramAddrGet()));
+ }
+ /* Prepare DMA descriptor to CESA descriptor from DRAM to SRAM */
+ pDmaDesc->phySrcAdd = MV_32BIT_LE(mvCesaVirtToPhys(&pReq->cesaDescBuf, pCesaDesc));
+ pDmaDesc->phyDestAdd = MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (MV_U8*)pSramDesc));
+ pDmaDesc->byteCnt = MV_32BIT_LE(sizeof(MV_CESA_DESC) | BIT31);
+
+ /* flush Source buffer */
+ mvOsCacheFlush(NULL, pCesaDesc, sizeof(MV_CESA_DESC));
+}
+
+/*******************************************************************************
+* mvCesaSramSaUpdate - Move required SA information to SRAM if needed.
+*
+* DESCRIPTION:
+* Copy to SRAM values of the required SA.
+*
+*
+* INPUT:
+* short sid - Session ID needs SRAM Cache update
+* MV_DMA_DESC *pDmaDesc - Pointer to DMA descriptor used to
+* copy SA values from DRAM to SRAM.
+*
+* RETURN:
+* MV_OK - Cache entry for this SA copied to SRAM.
+* MV_NO_CHANGE - Cache entry for this SA already exist in SRAM
+*
+*******************************************************************************/
+static INLINE void mvCesaSramSaUpdate(short sid, MV_DMA_DESC *pDmaDesc)
+{
+ MV_CESA_SA *pSA = &pCesaSAD[sid];
+
+ /* Prepare DMA descriptor to Copy CACHE_SA from SA database in DRAM to SRAM */
+ pDmaDesc->byteCnt = MV_32BIT_LE(sizeof(MV_CESA_SRAM_SA) | BIT31);
+ pDmaDesc->phySrcAdd = MV_32BIT_LE(mvCesaVirtToPhys(&cesaSramSaBuf, pSA->pSramSA));
+ pDmaDesc->phyDestAdd =
+ MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (MV_U8*)&cesaSramVirtPtr->sramSA));
+
+ /* Source buffer is already flushed during OpenSession*/
+ /*mvOsCacheFlush(NULL, &pSA->sramSA, sizeof(MV_CESA_SRAM_SA));*/
+}
+
+/*******************************************************************************
+* mvCesaDmaCopyPrepare - prepare DMA descriptor list to copy data presented by
+* Mbuf structure from DRAM to SRAM
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_CESA_MBUF* pMbuf - pointer to Mbuf structure contains request
+* data in DRAM
+* MV_U8* pSramBuf - pointer to buffer in SRAM where data should
+* be copied to.
+* MV_DMA_DESC* pDmaDesc - pointer to first DMA descriptor for this copy.
+* The function set number of DMA descriptors needed
+* to copy the copySize bytes from Mbuf.
+* MV_BOOL isToMbuf - Copy direction.
+* MV_TRUE means copy from SRAM buffer to Mbuf in DRAM.
+* MV_FALSE means copy from Mbuf in DRAM to SRAM buffer.
+* int offset - Offset in the Mbuf structure that copy should be
+* started from.
+* int copySize - Size of data should be copied.
+*
+* RETURN:
+* int - number of DMA descriptors used for the copy.
+*
+*******************************************************************************/
+#ifndef MV_NETBSD
+static INLINE int mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf,
+ MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf,
+ int offset, int copySize, MV_BOOL skipFlush)
+{
+ int bufOffset, bufSize, size, frag, i;
+ MV_U8* pBuf;
+
+ i = 0;
+
+ /* Calculate start place for copy: fragment number and offset in the fragment */
+ frag = mvCesaMbufOffset(pMbuf, offset, &bufOffset);
+ bufSize = pMbuf->pFrags[frag].bufSize - bufOffset;
+ pBuf = pMbuf->pFrags[frag].bufVirtPtr + bufOffset;
+
+ /* Size accumulate total copy size */
+ size = 0;
+
+ /* Create DMA lists to copy mBuf from pSrc to SRAM */
+ while(size < copySize)
+ {
+ /* Find copy size for each DMA descriptor */
+ bufSize = MV_MIN(bufSize, (copySize - size));
+ pDmaDesc[i].byteCnt = MV_32BIT_LE(bufSize | BIT31);
+ if(isToMbuf)
+ {
+ pDmaDesc[i].phyDestAdd = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf));
+ pDmaDesc[i].phySrcAdd =
+ MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (pSramBuf + size)));
+ /* invalidate the buffer */
+ if(skipFlush == MV_FALSE)
+ mvOsCacheInvalidate(NULL, pBuf, bufSize);
+ }
+ else
+ {
+ pDmaDesc[i].phySrcAdd = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf));
+ pDmaDesc[i].phyDestAdd =
+ MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (pSramBuf + size)));
+ /* flush the buffer */
+ if(skipFlush == MV_FALSE)
+ mvOsCacheFlush(NULL, pBuf, bufSize);
+ }
+
+ /* Count number of used DMA descriptors */
+ i++;
+ size += bufSize;
+
+ /* go to next fragment in the Mbuf */
+ frag++;
+ pBuf = pMbuf->pFrags[frag].bufVirtPtr;
+ bufSize = pMbuf->pFrags[frag].bufSize;
+ }
+ return i;
+}
+#else /* MV_NETBSD */
+static int mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf,
+ MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf,
+ int offset, int copySize, MV_BOOL skipFlush)
+{
+ int bufOffset, bufSize, thisSize, size, frag, i;
+ MV_ULONG bufPhys, sramPhys;
+ MV_U8* pBuf;
+
+ /*
+ * Calculate start place for copy: fragment number and offset in
+ * the fragment
+ */
+ frag = mvCesaMbufOffset(pMbuf, offset, &bufOffset);
+
+ /*
+ * Get SRAM physical address only once. We can update it in-place
+ * as we build the descriptor chain.
+ */
+ sramPhys = mvCesaSramVirtToPhys(NULL, pSramBuf);
+
+ /*
+ * 'size' accumulates total copy size, 'i' counts desccriptors.
+ */
+ size = i = 0;
+
+ /* Create DMA lists to copy mBuf from pSrc to SRAM */
+ while (size < copySize) {
+ /*
+ * Calculate # of bytes to copy from the current fragment,
+ * and the pointer to the start of data
+ */
+ bufSize = pMbuf->pFrags[frag].bufSize - bufOffset;
+ pBuf = pMbuf->pFrags[frag].bufVirtPtr + bufOffset;
+ bufOffset = 0; /* First frag may be non-zero */
+ frag++;
+
+ /*
+ * As long as there is data in the current fragment...
+ */
+ while (bufSize > 0) {
+ /*
+ * Ensure we don't cross an MMU page boundary.
+ * XXX: This is NetBSD-specific, but it is a
+ * quick and dirty way to fix the problem.
+ * A true HAL would rely on the OS-specific
+ * driver to do this...
+ */
+ thisSize = PAGE_SIZE -
+ (((MV_ULONG)pBuf) & (PAGE_SIZE - 1));
+ thisSize = MV_MIN(bufSize, thisSize);
+ /*
+ * Make sure we don't copy more than requested
+ */
+ if (thisSize > (copySize - size)) {
+ thisSize = copySize - size;
+ bufSize = 0;
+ }
+
+ /*
+ * Physicall address of this fragment
+ */
+ bufPhys = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf));
+
+ /*
+ * Set up the descriptor
+ */
+ pDmaDesc[i].byteCnt = MV_32BIT_LE(thisSize | BIT31);
+ if(isToMbuf) {
+ pDmaDesc[i].phyDestAdd = bufPhys;
+ pDmaDesc[i].phySrcAdd = MV_32BIT_LE(sramPhys);
+ /* invalidate the buffer */
+ if(skipFlush == MV_FALSE)
+ mvOsCacheInvalidate(NULL, pBuf, thisSize);
+ } else {
+ pDmaDesc[i].phySrcAdd = bufPhys;
+ pDmaDesc[i].phyDestAdd = MV_32BIT_LE(sramPhys);
+ /* flush the buffer */
+ if(skipFlush == MV_FALSE)
+ mvOsCacheFlush(NULL, pBuf, thisSize);
+ }
+
+ pDmaDesc[i].phyNextDescPtr =
+ MV_32BIT_LE(mvOsIoVirtToPhy(NULL,(&pDmaDesc[i+1])));
+
+ /* flush the DMA desc */
+ mvOsCacheFlush(NULL, &pDmaDesc[i], sizeof(MV_DMA_DESC));
+
+ /* Update state */
+ bufSize -= thisSize;
+ sramPhys += thisSize;
+ pBuf += thisSize;
+ size += thisSize;
+ i++;
+ }
+ }
+
+ return i;
+}
+#endif /* MV_NETBSD */
+/*******************************************************************************
+* mvCesaHmacIvGet - Calculate Inner and Outter values from HMAC key
+*
+* DESCRIPTION:
+* This function calculate Inner and Outer values used for HMAC algorithm.
+* This operation allows improve performance fro the whole HMAC processing.
+*
+* INPUT:
+* MV_CESA_MAC_MODE macMode - Authentication mode: HMAC_MD5 or HMAC_SHA1.
+* unsigned char key[] - Pointer to HMAC key.
+* int keyLength - Size of HMAC key (maximum 64 bytes)
+*
+* OUTPUT:
+* unsigned char innerIV[] - HASH(key^inner)
+* unsigned char outerIV[] - HASH(key^outter)
+*
+* RETURN: None
+*
+*******************************************************************************/
+static void mvCesaHmacIvGet(MV_CESA_MAC_MODE macMode, unsigned char key[], int keyLength,
+ unsigned char innerIV[], unsigned char outerIV[])
+{
+ unsigned char inner[MV_CESA_MAX_MAC_KEY_LENGTH];
+ unsigned char outer[MV_CESA_MAX_MAC_KEY_LENGTH];
+ int i, digestSize = 0;
+#if defined(MV_CPU_LE) || defined(MV_PPC)
+ MV_U32 swapped32, val32, *pVal32;
+#endif
+ for(i=0; i<keyLength; i++)
+ {
+ inner[i] = 0x36 ^ key[i];
+ outer[i] = 0x5c ^ key[i];
+ }
+
+ for(i=keyLength; i<MV_CESA_MAX_MAC_KEY_LENGTH; i++)
+ {
+ inner[i] = 0x36;
+ outer[i] = 0x5c;
+ }
+ if(macMode == MV_CESA_MAC_HMAC_MD5)
+ {
+ MV_MD5_CONTEXT ctx;
+
+ mvMD5Init(&ctx);
+ mvMD5Update(&ctx, inner, MV_CESA_MAX_MAC_KEY_LENGTH);
+
+ memcpy(innerIV, ctx.buf, MV_CESA_MD5_DIGEST_SIZE);
+ memset(&ctx, 0, sizeof(ctx));
+
+ mvMD5Init(&ctx);
+ mvMD5Update(&ctx, outer, MV_CESA_MAX_MAC_KEY_LENGTH);
+ memcpy(outerIV, ctx.buf, MV_CESA_MD5_DIGEST_SIZE);
+ memset(&ctx, 0, sizeof(ctx));
+ digestSize = MV_CESA_MD5_DIGEST_SIZE;
+ }
+ else if(macMode == MV_CESA_MAC_HMAC_SHA1)
+ {
+ MV_SHA1_CTX ctx;
+
+ mvSHA1Init(&ctx);
+ mvSHA1Update(&ctx, inner, MV_CESA_MAX_MAC_KEY_LENGTH);
+ memcpy(innerIV, ctx.state, MV_CESA_SHA1_DIGEST_SIZE);
+ memset(&ctx, 0, sizeof(ctx));
+
+ mvSHA1Init(&ctx);
+ mvSHA1Update(&ctx, outer, MV_CESA_MAX_MAC_KEY_LENGTH);
+ memcpy(outerIV, ctx.state, MV_CESA_SHA1_DIGEST_SIZE);
+ memset(&ctx, 0, sizeof(ctx));
+ digestSize = MV_CESA_SHA1_DIGEST_SIZE;
+ }
+ else
+ {
+ mvOsPrintf("hmacGetIV: Unexpected macMode %d\n", macMode);
+ }
+#if defined(MV_CPU_LE) || defined(MV_PPC)
+ /* 32 bits Swap of Inner and Outer values */
+ pVal32 = (MV_U32*)innerIV;
+ for(i=0; i<digestSize/4; i++)
+ {
+ val32 = *pVal32;
+ swapped32 = MV_BYTE_SWAP_32BIT(val32);
+ *pVal32 = swapped32;
+ pVal32++;
+ }
+ pVal32 = (MV_U32*)outerIV;
+ for(i=0; i<digestSize/4; i++)
+ {
+ val32 = *pVal32;
+ swapped32 = MV_BYTE_SWAP_32BIT(val32);
+ *pVal32 = swapped32;
+ pVal32++;
+ }
+#endif /* defined(MV_CPU_LE) || defined(MV_PPC) */
+}
+
+
+/*******************************************************************************
+* mvCesaFragSha1Complete - Complete SHA1 authentication started by HW using SW
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_CESA_MBUF* pMbuf - Pointer to Mbuf structure where data
+* for SHA1 is placed.
+* int offset - Offset in the Mbuf structure where
+* unprocessed data for SHA1 is started.
+* MV_U8* pOuterIV - Pointer to OUTER for this session.
+* If pOuterIV==NULL - MAC mode is HASH_SHA1
+* If pOuterIV!=NULL - MAC mode is HMAC_SHA1
+* int macLeftSize - Size of unprocessed data for SHA1.
+* int macTotalSize - Total size of data for SHA1 in the
+* request (processed + unprocessed)
+*
+* OUTPUT:
+* MV_U8* pDigest - Pointer to place where calculated Digest will
+* be stored.
+*
+* RETURN: None
+*
+*******************************************************************************/
+static void mvCesaFragSha1Complete(MV_CESA_MBUF* pMbuf, int offset,
+ MV_U8* pOuterIV, int macLeftSize,
+ int macTotalSize, MV_U8* pDigest)
+{
+ MV_SHA1_CTX ctx;
+ MV_U8 *pData;
+ int i, frag, fragOffset, size;
+
+ /* Read temporary Digest from HW */
+ for(i=0; i<MV_CESA_SHA1_DIGEST_SIZE/4; i++)
+ {
+ ctx.state[i] = MV_REG_READ(MV_CESA_AUTH_INIT_VAL_DIGEST_REG(i));
+ }
+ /* Initialize MV_SHA1_CTX structure */
+ memset(ctx.buffer, 0, 64);
+ /* Set count[0] in bits. 32 bits is enough for 512 MBytes */
+ /* so count[1] is always 0 */
+ ctx.count[0] = ((macTotalSize - macLeftSize) * 8);
+ ctx.count[1] = 0;
+
+ /* If HMAC - add size of Inner block (64 bytes) ro count[0] */
+ if(pOuterIV != NULL)
+ ctx.count[0] += (64 * 8);
+
+ /* Get place of unprocessed data in the Mbuf structure */
+ frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset);
+ if(frag == MV_INVALID)
+ {
+ mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+ return;
+ }
+
+ pData = pMbuf->pFrags[frag].bufVirtPtr + fragOffset;
+ size = pMbuf->pFrags[frag].bufSize - fragOffset;
+
+ /* Complete Inner part */
+ while(macLeftSize > 0)
+ {
+ if(macLeftSize <= size)
+ {
+ mvSHA1Update(&ctx, pData, macLeftSize);
+ break;
+ }
+ mvSHA1Update(&ctx, pData, size);
+ macLeftSize -= size;
+ frag++;
+ pData = pMbuf->pFrags[frag].bufVirtPtr;
+ size = pMbuf->pFrags[frag].bufSize;
+ }
+ mvSHA1Final(pDigest, &ctx);
+/*
+ mvOsPrintf("mvCesaFragSha1Complete: pOuterIV=%p, macLeftSize=%d, macTotalSize=%d\n",
+ pOuterIV, macLeftSize, macTotalSize);
+ mvDebugMemDump(pDigest, MV_CESA_SHA1_DIGEST_SIZE, 1);
+*/
+
+ if(pOuterIV != NULL)
+ {
+ /* If HMAC - Complete Outer part */
+ for(i=0; i<MV_CESA_SHA1_DIGEST_SIZE/4; i++)
+ {
+#if defined(MV_CPU_LE) || defined(MV_ARM)
+ ctx.state[i] = MV_BYTE_SWAP_32BIT(((MV_U32*)pOuterIV)[i]);
+#else
+ ctx.state[i] = ((MV_U32*)pOuterIV)[i];
+#endif
+ }
+ memset(ctx.buffer, 0, 64);
+
+ ctx.count[0] = 64*8;
+ ctx.count[1] = 0;
+ mvSHA1Update(&ctx, pDigest, MV_CESA_SHA1_DIGEST_SIZE);
+ mvSHA1Final(pDigest, &ctx);
+ }
+}
+
+/*******************************************************************************
+* mvCesaFragMd5Complete - Complete MD5 authentication started by HW using SW
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_CESA_MBUF* pMbuf - Pointer to Mbuf structure where data
+* for SHA1 is placed.
+* int offset - Offset in the Mbuf structure where
+* unprocessed data for MD5 is started.
+* MV_U8* pOuterIV - Pointer to OUTER for this session.
+* If pOuterIV==NULL - MAC mode is HASH_MD5
+* If pOuterIV!=NULL - MAC mode is HMAC_MD5
+* int macLeftSize - Size of unprocessed data for MD5.
+* int macTotalSize - Total size of data for MD5 in the
+* request (processed + unprocessed)
+*
+* OUTPUT:
+* MV_U8* pDigest - Pointer to place where calculated Digest will
+* be stored.
+*
+* RETURN: None
+*
+*******************************************************************************/
+static void mvCesaFragMd5Complete(MV_CESA_MBUF* pMbuf, int offset,
+ MV_U8* pOuterIV, int macLeftSize,
+ int macTotalSize, MV_U8* pDigest)
+{
+ MV_MD5_CONTEXT ctx;
+ MV_U8 *pData;
+ int i, frag, fragOffset, size;
+
+ /* Read temporary Digest from HW */
+ for(i=0; i<MV_CESA_MD5_DIGEST_SIZE/4; i++)
+ {
+ ctx.buf[i] = MV_REG_READ(MV_CESA_AUTH_INIT_VAL_DIGEST_REG(i));
+ }
+ memset(ctx.in, 0, 64);
+
+ /* Set count[0] in bits. 32 bits is enough for 512 MBytes */
+ /* so count[1] is always 0 */
+ ctx.bits[0] = ((macTotalSize - macLeftSize) * 8);
+ ctx.bits[1] = 0;
+
+ /* If HMAC - add size of Inner block (64 bytes) ro count[0] */
+ if(pOuterIV != NULL)
+ ctx.bits[0] += (64 * 8);
+
+ frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset);
+ if(frag == MV_INVALID)
+ {
+ mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+ return;
+ }
+
+ pData = pMbuf->pFrags[frag].bufVirtPtr + fragOffset;
+ size = pMbuf->pFrags[frag].bufSize - fragOffset;
+
+ /* Complete Inner part */
+ while(macLeftSize > 0)
+ {
+ if(macLeftSize <= size)
+ {
+ mvMD5Update(&ctx, pData, macLeftSize);
+ break;
+ }
+ mvMD5Update(&ctx, pData, size);
+ macLeftSize -= size;
+ frag++;
+ pData = pMbuf->pFrags[frag].bufVirtPtr;
+ size = pMbuf->pFrags[frag].bufSize;
+ }
+ mvMD5Final(pDigest, &ctx);
+
+/*
+ mvOsPrintf("mvCesaFragMd5Complete: pOuterIV=%p, macLeftSize=%d, macTotalSize=%d\n",
+ pOuterIV, macLeftSize, macTotalSize);
+ mvDebugMemDump(pDigest, MV_CESA_MD5_DIGEST_SIZE, 1);
+*/
+ if(pOuterIV != NULL)
+ {
+ /* Complete Outer part */
+ for(i=0; i<MV_CESA_MD5_DIGEST_SIZE/4; i++)
+ {
+#if defined(MV_CPU_LE) || defined(MV_ARM)
+ ctx.buf[i] = MV_BYTE_SWAP_32BIT(((MV_U32*)pOuterIV)[i]);
+#else
+ ctx.buf[i] = ((MV_U32*)pOuterIV)[i];
+#endif
+ }
+ memset(ctx.in, 0, 64);
+
+ ctx.bits[0] = 64*8;
+ ctx.bits[1] = 0;
+ mvMD5Update(&ctx, pDigest, MV_CESA_MD5_DIGEST_SIZE);
+ mvMD5Final(pDigest, &ctx);
+ }
+}
+
+/*******************************************************************************
+* mvCesaFragAuthComplete -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_CESA_REQ* pReq,
+* MV_CESA_SA* pSA,
+* int macDataSize
+*
+* RETURN:
+* MV_STATUS
+*
+*******************************************************************************/
+static MV_STATUS mvCesaFragAuthComplete(MV_CESA_REQ* pReq, MV_CESA_SA* pSA,
+ int macDataSize)
+{
+ MV_CESA_COMMAND* pCmd = pReq->pCmd;
+ MV_U8* pDigest;
+ MV_CESA_MAC_MODE macMode;
+ MV_U8* pOuterIV = NULL;
+
+ /* Copy data from Source fragment to Destination */
+ if(pCmd->pSrc != pCmd->pDst)
+ {
+ mvCesaMbufCopy(pCmd->pDst, pReq->frags.bufOffset,
+ pCmd->pSrc, pReq->frags.bufOffset, macDataSize);
+ }
+
+/*
+ mvCesaCopyFromMbuf(cesaSramVirtPtr->buf[0], pCmd->pSrc, pReq->frags.bufOffset, macDataSize);
+ mvCesaCopyToMbuf(cesaSramVirtPtr->buf[0], pCmd->pDst, pReq->frags.bufOffset, macDataSize);
+*/
+ pDigest = (mvCesaSramAddrGet() + pReq->frags.newDigestOffset);
+
+ macMode = (pSA->config & MV_CESA_MAC_MODE_MASK) >> MV_CESA_MAC_MODE_OFFSET;
+/*
+ mvOsPrintf("macDataSize=%d, macLength=%d, digestOffset=%d, macMode=%d\n",
+ macDataSize, pCmd->macLength, pCmd->digestOffset, macMode);
+*/
+ switch(macMode)
+ {
+ case MV_CESA_MAC_HMAC_MD5:
+ pOuterIV = pSA->pSramSA->macOuterIV;
+
+ case MV_CESA_MAC_MD5:
+ mvCesaFragMd5Complete(pCmd->pDst, pReq->frags.bufOffset, pOuterIV,
+ macDataSize, pCmd->macLength, pDigest);
+ break;
+
+ case MV_CESA_MAC_HMAC_SHA1:
+ pOuterIV = pSA->pSramSA->macOuterIV;
+
+ case MV_CESA_MAC_SHA1:
+ mvCesaFragSha1Complete(pCmd->pDst, pReq->frags.bufOffset, pOuterIV,
+ macDataSize, pCmd->macLength, pDigest);
+ break;
+
+ default:
+ mvOsPrintf("mvCesaFragAuthComplete: Unexpected macMode %d\n", macMode);
+ return MV_BAD_PARAM;
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaCtrModeInit -
+*
+* DESCRIPTION:
+*
+*
+* INPUT: NONE
+*
+*
+* RETURN:
+* MV_CESA_COMMAND*
+*
+*******************************************************************************/
+static MV_CESA_COMMAND* mvCesaCtrModeInit(void)
+{
+ MV_CESA_MBUF *pMbuf;
+ MV_U8 *pBuf;
+ MV_CESA_COMMAND *pCmd;
+
+ pBuf = mvOsMalloc(sizeof(MV_CESA_COMMAND) +
+ sizeof(MV_CESA_MBUF) + sizeof(MV_BUF_INFO) + 100);
+ if(pBuf == NULL)
+ {
+ mvOsPrintf("mvCesaSessionOpen: Can't allocate %u bytes for CTR Mode\n",
+ sizeof(MV_CESA_COMMAND) + sizeof(MV_CESA_MBUF) + sizeof(MV_BUF_INFO) );
+ return NULL;
+ }
+ pCmd = (MV_CESA_COMMAND*)pBuf;
+ pBuf += sizeof(MV_CESA_COMMAND);
+
+ pMbuf = (MV_CESA_MBUF*)pBuf;
+ pBuf += sizeof(MV_CESA_MBUF);
+
+ pMbuf->pFrags = (MV_BUF_INFO*)pBuf;
+
+ pMbuf->numFrags = 1;
+ pCmd->pSrc = pMbuf;
+ pCmd->pDst = pMbuf;
+/*
+ mvOsPrintf("CtrModeInit: pCmd=%p, pSrc=%p, pDst=%p, pFrags=%p\n",
+ pCmd, pCmd->pSrc, pCmd->pDst,
+ pMbuf->pFrags);
+*/
+ return pCmd;
+}
+
+/*******************************************************************************
+* mvCesaCtrModePrepare -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd
+*
+* RETURN:
+* MV_STATUS
+*
+*******************************************************************************/
+static MV_STATUS mvCesaCtrModePrepare(MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd)
+{
+ MV_CESA_MBUF *pMbuf;
+ MV_U8 *pBuf, *pIV;
+ MV_U32 counter, *pCounter;
+ int cryptoSize = MV_ALIGN_UP(pCmd->cryptoLength, MV_CESA_AES_BLOCK_SIZE);
+/*
+ mvOsPrintf("CtrModePrepare: pCmd=%p, pCtrSrc=%p, pCtrDst=%p, pOrgCmd=%p, pOrgSrc=%p, pOrgDst=%p\n",
+ pCmd, pCmd->pSrc, pCmd->pDst,
+ pCtrModeCmd, pCtrModeCmd->pSrc, pCtrModeCmd->pDst);
+*/
+ pMbuf = pCtrModeCmd->pSrc;
+
+ /* Allocate buffer for Key stream */
+ pBuf = mvOsIoCachedMalloc(cesaOsHandle,cryptoSize,
+ &pMbuf->pFrags[0].bufPhysAddr,
+ &pMbuf->pFrags[0].memHandle);
+ if(pBuf == NULL)
+ {
+ mvOsPrintf("mvCesaCtrModePrepare: Can't allocate %d bytes\n", cryptoSize);
+ return MV_OUT_OF_CPU_MEM;
+ }
+ memset(pBuf, 0, cryptoSize);
+ mvOsCacheFlush(NULL, pBuf, cryptoSize);
+
+ pMbuf->pFrags[0].bufVirtPtr = pBuf;
+ pMbuf->mbufSize = cryptoSize;
+ pMbuf->pFrags[0].bufSize = cryptoSize;
+
+ pCtrModeCmd->pReqPrv = pCmd->pReqPrv;
+ pCtrModeCmd->sessionId = pCmd->sessionId;
+
+ /* ivFromUser and ivOffset are don't care */
+ pCtrModeCmd->cryptoOffset = 0;
+ pCtrModeCmd->cryptoLength = cryptoSize;
+
+ /* digestOffset, macOffset and macLength are don't care */
+
+ mvCesaCopyFromMbuf(pBuf, pCmd->pSrc, pCmd->ivOffset, MV_CESA_AES_BLOCK_SIZE);
+ pCounter = (MV_U32*)(pBuf + (MV_CESA_AES_BLOCK_SIZE - sizeof(counter)));
+ counter = *pCounter;
+ counter = MV_32BIT_BE(counter);
+ pIV = pBuf;
+ cryptoSize -= MV_CESA_AES_BLOCK_SIZE;
+
+ /* fill key stream */
+ while(cryptoSize > 0)
+ {
+ pBuf += MV_CESA_AES_BLOCK_SIZE;
+ memcpy(pBuf, pIV, MV_CESA_AES_BLOCK_SIZE - sizeof(counter));
+ pCounter = (MV_U32*)(pBuf + (MV_CESA_AES_BLOCK_SIZE - sizeof(counter)));
+ counter++;
+ *pCounter = MV_32BIT_BE(counter);
+ cryptoSize -= MV_CESA_AES_BLOCK_SIZE;
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaCtrModeComplete -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd
+*
+* RETURN:
+* MV_STATUS
+*
+*******************************************************************************/
+static MV_STATUS mvCesaCtrModeComplete(MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd)
+{
+ int srcFrag, dstFrag, srcOffset, dstOffset, keyOffset, srcSize, dstSize;
+ int cryptoSize = pCmd->cryptoLength;
+ MV_U8 *pSrc, *pDst, *pKey;
+ MV_STATUS status = MV_OK;
+/*
+ mvOsPrintf("CtrModeComplete: pCmd=%p, pCtrSrc=%p, pCtrDst=%p, pOrgCmd=%p, pOrgSrc=%p, pOrgDst=%p\n",
+ pCmd, pCmd->pSrc, pCmd->pDst,
+ pOrgCmd, pOrgCmd->pSrc, pOrgCmd->pDst);
+*/
+ /* XOR source data with key stream to destination data */
+ pKey = pCmd->pDst->pFrags[0].bufVirtPtr;
+ keyOffset = 0;
+
+ if( (pOrgCmd->pSrc != pOrgCmd->pDst) &&
+ (pOrgCmd->cryptoOffset > 0) )
+ {
+ /* Copy Prefix from source buffer to destination buffer */
+
+ status = mvCesaMbufCopy(pOrgCmd->pDst, 0,
+ pOrgCmd->pSrc, 0, pOrgCmd->cryptoOffset);
+/*
+ status = mvCesaCopyFromMbuf(tempBuf, pOrgCmd->pSrc,
+ 0, pOrgCmd->cryptoOffset);
+ status = mvCesaCopyToMbuf(tempBuf, pOrgCmd->pDst,
+ 0, pOrgCmd->cryptoOffset);
+*/
+ }
+
+ srcFrag = mvCesaMbufOffset(pOrgCmd->pSrc, pOrgCmd->cryptoOffset, &srcOffset);
+ pSrc = pOrgCmd->pSrc->pFrags[srcFrag].bufVirtPtr;
+ srcSize = pOrgCmd->pSrc->pFrags[srcFrag].bufSize;
+
+ dstFrag = mvCesaMbufOffset(pOrgCmd->pDst, pOrgCmd->cryptoOffset, &dstOffset);
+ pDst = pOrgCmd->pDst->pFrags[dstFrag].bufVirtPtr;
+ dstSize = pOrgCmd->pDst->pFrags[dstFrag].bufSize;
+
+ while(cryptoSize > 0)
+ {
+ pDst[dstOffset] = (pSrc[srcOffset] ^ pKey[keyOffset]);
+
+ cryptoSize--;
+ dstOffset++;
+ srcOffset++;
+ keyOffset++;
+
+ if(srcOffset >= srcSize)
+ {
+ srcFrag++;
+ srcOffset = 0;
+ pSrc = pOrgCmd->pSrc->pFrags[srcFrag].bufVirtPtr;
+ srcSize = pOrgCmd->pSrc->pFrags[srcFrag].bufSize;
+ }
+
+ if(dstOffset >= dstSize)
+ {
+ dstFrag++;
+ dstOffset = 0;
+ pDst = pOrgCmd->pDst->pFrags[dstFrag].bufVirtPtr;
+ dstSize = pOrgCmd->pDst->pFrags[dstFrag].bufSize;
+ }
+ }
+
+ if(pOrgCmd->pSrc != pOrgCmd->pDst)
+ {
+ /* Copy Suffix from source buffer to destination buffer */
+ srcOffset = pOrgCmd->cryptoOffset + pOrgCmd->cryptoLength;
+
+ if( (pOrgCmd->pDst->mbufSize - srcOffset) > 0)
+ {
+ status = mvCesaMbufCopy(pOrgCmd->pDst, srcOffset,
+ pOrgCmd->pSrc, srcOffset,
+ pOrgCmd->pDst->mbufSize - srcOffset);
+ }
+
+/*
+ status = mvCesaCopyFromMbuf(tempBuf, pOrgCmd->pSrc,
+ srcOffset, pOrgCmd->pSrc->mbufSize - srcOffset);
+ status = mvCesaCopyToMbuf(tempBuf, pOrgCmd->pDst,
+ srcOffset, pOrgCmd->pDst->mbufSize - srcOffset);
+*/
+ }
+
+ /* Free buffer used for Key stream */
+ mvOsIoCachedFree(cesaOsHandle,pCmd->pDst->pFrags[0].bufSize,
+ pCmd->pDst->pFrags[0].bufPhysAddr,
+ pCmd->pDst->pFrags[0].bufVirtPtr,
+ pCmd->pDst->pFrags[0].memHandle);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaCtrModeFinish -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_CESA_COMMAND* pCmd
+*
+* RETURN:
+* MV_STATUS
+*
+*******************************************************************************/
+static void mvCesaCtrModeFinish(MV_CESA_COMMAND* pCmd)
+{
+ mvOsFree(pCmd);
+}
+
+/*******************************************************************************
+* mvCesaParamCheck -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, MV_U8* pFixOffset
+*
+* RETURN:
+* MV_STATUS
+*
+*******************************************************************************/
+static MV_STATUS mvCesaParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd,
+ MV_U8* pFixOffset)
+{
+ MV_U8 fixOffset = 0xFF;
+
+ /* Check AUTH operation parameters */
+ if( ((pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET)) )
+ {
+ /* MAC offset should be at least 4 byte aligned */
+ if( MV_IS_NOT_ALIGN(pCmd->macOffset, 4) )
+ {
+ mvOsPrintf("mvCesaAction: macOffset %d must be 4 byte aligned\n",
+ pCmd->macOffset);
+ return MV_BAD_PARAM;
+ }
+ /* Digest offset must be 4 byte aligned */
+ if( MV_IS_NOT_ALIGN(pCmd->digestOffset, 4) )
+ {
+ mvOsPrintf("mvCesaAction: digestOffset %d must be 4 byte aligned\n",
+ pCmd->digestOffset);
+ return MV_BAD_PARAM;
+ }
+ /* In addition all offsets should be the same alignment: 8 or 4 */
+ if(fixOffset == 0xFF)
+ {
+ fixOffset = (pCmd->macOffset % 8);
+ }
+ else
+ {
+ if( (pCmd->macOffset % 8) != fixOffset)
+ {
+ mvOsPrintf("mvCesaAction: macOffset %d mod 8 must be equal %d\n",
+ pCmd->macOffset, fixOffset);
+ return MV_BAD_PARAM;
+ }
+ }
+ if( (pCmd->digestOffset % 8) != fixOffset)
+ {
+ mvOsPrintf("mvCesaAction: digestOffset %d mod 8 must be equal %d\n",
+ pCmd->digestOffset, fixOffset);
+ return MV_BAD_PARAM;
+ }
+ }
+ /* Check CRYPTO operation parameters */
+ if( ((pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) )
+ {
+ /* CryptoOffset should be at least 4 byte aligned */
+ if( MV_IS_NOT_ALIGN(pCmd->cryptoOffset, 4) )
+ {
+ mvOsPrintf("CesaAction: cryptoOffset=%d must be 4 byte aligned\n",
+ pCmd->cryptoOffset);
+ return MV_BAD_PARAM;
+ }
+ /* cryptoLength should be the whole number of blocks */
+ if( MV_IS_NOT_ALIGN(pCmd->cryptoLength, pSA->cryptoBlockSize) )
+ {
+ mvOsPrintf("mvCesaAction: cryptoLength=%d must be %d byte aligned\n",
+ pCmd->cryptoLength, pSA->cryptoBlockSize);
+ return MV_BAD_PARAM;
+ }
+ if(fixOffset == 0xFF)
+ {
+ fixOffset = (pCmd->cryptoOffset % 8);
+ }
+ else
+ {
+ /* In addition all offsets should be the same alignment: 8 or 4 */
+ if( (pCmd->cryptoOffset % 8) != fixOffset)
+ {
+ mvOsPrintf("mvCesaAction: cryptoOffset %d mod 8 must be equal %d \n",
+ pCmd->cryptoOffset, fixOffset);
+ return MV_BAD_PARAM;
+ }
+ }
+
+ /* check for CBC mode */
+ if(pSA->cryptoIvSize > 0)
+ {
+ /* cryptoIV must not be part of CryptoLength */
+ if( ((pCmd->ivOffset + pSA->cryptoIvSize) > pCmd->cryptoOffset) &&
+ (pCmd->ivOffset < (pCmd->cryptoOffset + pCmd->cryptoLength)) )
+ {
+ mvOsPrintf("mvCesaFragParamCheck: cryptoIvOffset (%d) is part of cryptoLength (%d+%d)\n",
+ pCmd->ivOffset, pCmd->macOffset, pCmd->macLength);
+ return MV_BAD_PARAM;
+ }
+
+ /* ivOffset must be 4 byte aligned */
+ if( MV_IS_NOT_ALIGN(pCmd->ivOffset, 4) )
+ {
+ mvOsPrintf("CesaAction: ivOffset=%d must be 4 byte aligned\n",
+ pCmd->ivOffset);
+ return MV_BAD_PARAM;
+ }
+ /* In addition all offsets should be the same alignment: 8 or 4 */
+ if( (pCmd->ivOffset % 8) != fixOffset)
+ {
+ mvOsPrintf("mvCesaAction: ivOffset %d mod 8 must be %d\n",
+ pCmd->ivOffset, fixOffset);
+ return MV_BAD_PARAM;
+ }
+ }
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaFragParamCheck -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd
+*
+* RETURN:
+* MV_STATUS
+*
+*******************************************************************************/
+static MV_STATUS mvCesaFragParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd)
+{
+ int offset;
+
+ if( ((pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET)) )
+ {
+ /* macOffset must be less that SRAM buffer size */
+ if(pCmd->macOffset > (sizeof(cesaSramVirtPtr->buf) - MV_CESA_AUTH_BLOCK_SIZE))
+ {
+ mvOsPrintf("mvCesaFragParamCheck: macOffset is too large (%d)\n",
+ pCmd->macOffset);
+ return MV_BAD_PARAM;
+ }
+ /* macOffset+macSize must be more than mbufSize - SRAM buffer size */
+ if( ((pCmd->macOffset + pCmd->macLength) > pCmd->pSrc->mbufSize) ||
+ ((pCmd->pSrc->mbufSize - (pCmd->macOffset + pCmd->macLength)) >=
+ sizeof(cesaSramVirtPtr->buf)) )
+ {
+ mvOsPrintf("mvCesaFragParamCheck: macLength is too large (%d), mbufSize=%d\n",
+ pCmd->macLength, pCmd->pSrc->mbufSize);
+ return MV_BAD_PARAM;
+ }
+ }
+
+ if( ((pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) )
+ {
+ /* cryptoOffset must be less that SRAM buffer size */
+ /* 4 for possible fixOffset */
+ if( (pCmd->cryptoOffset + 4) > (sizeof(cesaSramVirtPtr->buf) - pSA->cryptoBlockSize))
+ {
+ mvOsPrintf("mvCesaFragParamCheck: cryptoOffset is too large (%d)\n",
+ pCmd->cryptoOffset);
+ return MV_BAD_PARAM;
+ }
+
+ /* cryptoOffset+cryptoSize must be more than mbufSize - SRAM buffer size */
+ if( ((pCmd->cryptoOffset + pCmd->cryptoLength) > pCmd->pSrc->mbufSize) ||
+ ((pCmd->pSrc->mbufSize - (pCmd->cryptoOffset + pCmd->cryptoLength)) >=
+ (sizeof(cesaSramVirtPtr->buf) - pSA->cryptoBlockSize)) )
+ {
+ mvOsPrintf("mvCesaFragParamCheck: cryptoLength is too large (%d), mbufSize=%d\n",
+ pCmd->cryptoLength, pCmd->pSrc->mbufSize);
+ return MV_BAD_PARAM;
+ }
+ }
+
+ /* When MAC_THEN_CRYPTO or CRYPTO_THEN_MAC */
+ if( ((pSA->config & MV_CESA_OPERATION_MASK) ==
+ (MV_CESA_MAC_THEN_CRYPTO << MV_CESA_OPERATION_OFFSET)) ||
+ ((pSA->config & MV_CESA_OPERATION_MASK) ==
+ (MV_CESA_CRYPTO_THEN_MAC << MV_CESA_OPERATION_OFFSET)) )
+ {
+ if( (mvCtrlModelGet() == MV_5182_DEV_ID) ||
+ ( (mvCtrlModelGet() == MV_5181_DEV_ID) &&
+ (mvCtrlRevGet() >= MV_5181L_A0_REV) &&
+ (pCmd->macLength >= (1 << 14)) ) )
+ {
+ return MV_NOT_ALLOWED;
+ }
+
+ /* abs(cryptoOffset-macOffset) must be aligned cryptoBlockSize */
+ if(pCmd->cryptoOffset > pCmd->macOffset)
+ {
+ offset = pCmd->cryptoOffset - pCmd->macOffset;
+ }
+ else
+ {
+ offset = pCmd->macOffset - pCmd->cryptoOffset;
+ }
+
+ if( MV_IS_NOT_ALIGN(offset, pSA->cryptoBlockSize) )
+ {
+/*
+ mvOsPrintf("mvCesaFragParamCheck: (cryptoOffset - macOffset) must be %d byte aligned\n",
+ pSA->cryptoBlockSize);
+*/
+ return MV_NOT_ALLOWED;
+ }
+ /* Digest must not be part of CryptoLength */
+ if( ((pCmd->digestOffset + pSA->digestSize) > pCmd->cryptoOffset) &&
+ (pCmd->digestOffset < (pCmd->cryptoOffset + pCmd->cryptoLength)) )
+ {
+/*
+ mvOsPrintf("mvCesaFragParamCheck: digestOffset (%d) is part of cryptoLength (%d+%d)\n",
+ pCmd->digestOffset, pCmd->cryptoOffset, pCmd->cryptoLength);
+*/
+ return MV_NOT_ALLOWED;
+ }
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaFragSizeFind -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+* MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd,
+* int cryptoOffset, int macOffset,
+*
+* OUTPUT:
+* int* pCopySize, int* pCryptoDataSize, int* pMacDataSize
+*
+* RETURN:
+* MV_STATUS
+*
+*******************************************************************************/
+static void mvCesaFragSizeFind(MV_CESA_SA* pSA, MV_CESA_REQ* pReq,
+ int cryptoOffset, int macOffset,
+ int* pCopySize, int* pCryptoDataSize, int* pMacDataSize)
+{
+ MV_CESA_COMMAND *pCmd = pReq->pCmd;
+ int cryptoDataSize, macDataSize, copySize;
+
+ cryptoDataSize = macDataSize = 0;
+ copySize = *pCopySize;
+
+ if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) )
+ {
+ cryptoDataSize = MV_MIN( (copySize - cryptoOffset),
+ (pCmd->cryptoLength - (pReq->frags.cryptoSize + 1)) );
+
+ /* cryptoSize for each fragment must be the whole number of blocksSize */
+ if( MV_IS_NOT_ALIGN(cryptoDataSize, pSA->cryptoBlockSize) )
+ {
+ cryptoDataSize = MV_ALIGN_DOWN(cryptoDataSize, pSA->cryptoBlockSize);
+ copySize = cryptoOffset + cryptoDataSize;
+ }
+ }
+ if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+ (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+ {
+ macDataSize = MV_MIN( (copySize - macOffset),
+ (pCmd->macLength - (pReq->frags.macSize + 1)));
+
+ /* macSize for each fragment (except last) must be the whole number of blocksSize */
+ if( MV_IS_NOT_ALIGN(macDataSize, MV_CESA_AUTH_BLOCK_SIZE) )
+ {
+ macDataSize = MV_ALIGN_DOWN(macDataSize, MV_CESA_AUTH_BLOCK_SIZE);
+ copySize = macOffset + macDataSize;
+ }
+ cryptoDataSize = copySize - cryptoOffset;
+ }
+ *pCopySize = copySize;
+
+ if(pCryptoDataSize != NULL)
+ *pCryptoDataSize = cryptoDataSize;
+
+ if(pMacDataSize != NULL)
+ *pMacDataSize = macDataSize;
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvCesa.h - Header File for Cryptographic Engines and Security Accelerator
+*
+* DESCRIPTION:
+* This header file contains macros typedefs and function declaration for
+* the Marvell Cryptographic Engines and Security Accelerator.
+*
+*******************************************************************************/
+
+#ifndef __mvCesa_h__
+#define __mvCesa_h__
+
+#include "mvOs.h"
+#include "mvCommon.h"
+#include "mvDebug.h"
+
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+#include "cesa/mvMD5.h"
+#include "cesa/mvSHA1.h"
+
+#include "cesa/mvCesa.h"
+#include "cesa/AES/mvAes.h"
+#include "mvSysHwConfig.h"
+
+#ifdef MV_INCLUDE_IDMA
+#include "idma/mvIdma.h"
+#include "idma/mvIdmaRegs.h"
+#else
+/* Redefine MV_DMA_DESC structure */
+typedef struct _mvDmaDesc
+{
+ MV_U32 byteCnt; /* The total number of bytes to transfer */
+ MV_U32 phySrcAdd; /* The physical source address */
+ MV_U32 phyDestAdd; /* The physical destination address */
+ MV_U32 phyNextDescPtr; /* If we are using chain mode DMA transfer, */
+ /* then this pointer should point to the */
+ /* physical address of the next descriptor, */
+ /* otherwise it should be NULL. */
+}MV_DMA_DESC;
+#endif /* MV_INCLUDE_IDMA */
+
+#include "cesa/mvCesaRegs.h"
+
+#define MV_CESA_AUTH_BLOCK_SIZE 64 /* bytes */
+
+#define MV_CESA_MD5_DIGEST_SIZE 16 /* bytes */
+#define MV_CESA_SHA1_DIGEST_SIZE 20 /* bytes */
+
+#define MV_CESA_MAX_DIGEST_SIZE MV_CESA_SHA1_DIGEST_SIZE
+
+#define MV_CESA_DES_KEY_LENGTH 8 /* bytes = 64 bits */
+#define MV_CESA_3DES_KEY_LENGTH 24 /* bytes = 192 bits */
+#define MV_CESA_AES_128_KEY_LENGTH 16 /* bytes = 128 bits */
+#define MV_CESA_AES_192_KEY_LENGTH 24 /* bytes = 192 bits */
+#define MV_CESA_AES_256_KEY_LENGTH 32 /* bytes = 256 bits */
+
+#define MV_CESA_MAX_CRYPTO_KEY_LENGTH MV_CESA_AES_256_KEY_LENGTH
+
+#define MV_CESA_DES_BLOCK_SIZE 8 /* bytes = 64 bits */
+#define MV_CESA_3DES_BLOCK_SIZE 8 /* bytes = 64 bits */
+
+#define MV_CESA_AES_BLOCK_SIZE 16 /* bytes = 128 bits */
+
+#define MV_CESA_MAX_IV_LENGTH MV_CESA_AES_BLOCK_SIZE
+
+#define MV_CESA_MAX_MAC_KEY_LENGTH 64 /* bytes */
+
+typedef struct
+{
+ MV_U8 cryptoKey[MV_CESA_MAX_CRYPTO_KEY_LENGTH];
+ MV_U8 macKey[MV_CESA_MAX_MAC_KEY_LENGTH];
+ MV_CESA_OPERATION operation;
+ MV_CESA_DIRECTION direction;
+ MV_CESA_CRYPTO_ALG cryptoAlgorithm;
+ MV_CESA_CRYPTO_MODE cryptoMode;
+ MV_U8 cryptoKeyLength;
+ MV_CESA_MAC_MODE macMode;
+ MV_U8 macKeyLength;
+ MV_U8 digestSize;
+
+} MV_CESA_OPEN_SESSION;
+
+typedef struct
+{
+ MV_BUF_INFO *pFrags;
+ MV_U16 numFrags;
+ MV_U16 mbufSize;
+
+} MV_CESA_MBUF;
+
+typedef struct
+{
+ void* pReqPrv; /* instead of reqId */
+ MV_U32 retCode;
+ MV_16 sessionId;
+
+} MV_CESA_RESULT;
+
+typedef void (*MV_CESA_CALLBACK) (MV_CESA_RESULT* pResult);
+
+
+typedef struct
+{
+ void* pReqPrv; /* instead of reqId */
+ MV_CESA_MBUF* pSrc;
+ MV_CESA_MBUF* pDst;
+ MV_CESA_CALLBACK* pFuncCB;
+ MV_16 sessionId;
+ MV_U16 ivFromUser;
+ MV_U16 ivOffset;
+ MV_U16 cryptoOffset;
+ MV_U16 cryptoLength;
+ MV_U16 digestOffset;
+ MV_U16 macOffset;
+ MV_U16 macLength;
+ MV_BOOL skipFlush;
+} MV_CESA_COMMAND;
+
+
+
+MV_STATUS mvCesaHalInit (int numOfSession, int queueDepth, char* pSramBase, MV_U32 cryptEngBase, void *osHandle);
+MV_STATUS mvCesaFinish (void);
+MV_STATUS mvCesaSessionOpen(MV_CESA_OPEN_SESSION *pSession, short* pSid);
+MV_STATUS mvCesaSessionClose(short sid);
+MV_STATUS mvCesaCryptoIvSet(MV_U8* pIV, int ivSize);
+
+MV_STATUS mvCesaAction (MV_CESA_COMMAND* pCmd);
+
+MV_U32 mvCesaInProcessGet(void);
+MV_STATUS mvCesaReadyDispatch(void);
+MV_STATUS mvCesaReadyGet(MV_CESA_RESULT* pResult);
+MV_BOOL mvCesaIsReady(void);
+
+int mvCesaMbufOffset(MV_CESA_MBUF* pMbuf, int offset, int* pBufOffset);
+MV_STATUS mvCesaCopyFromMbuf(MV_U8* pDst, MV_CESA_MBUF* pSrcMbuf,
+ int offset, int size);
+MV_STATUS mvCesaCopyToMbuf(MV_U8* pSrc, MV_CESA_MBUF* pDstMbuf,
+ int offset, int size);
+MV_STATUS mvCesaMbufCopy(MV_CESA_MBUF* pMbufDst, int dstMbufOffset,
+ MV_CESA_MBUF* pMbufSrc, int srcMbufOffset, int size);
+
+/********** Debug functions ********/
+
+void mvCesaDebugMbuf(const char* str, MV_CESA_MBUF *pMbuf, int offset, int size);
+void mvCesaDebugSA(short sid, int mode);
+void mvCesaDebugStats(void);
+void mvCesaDebugStatsClear(void);
+void mvCesaDebugRegs(void);
+void mvCesaDebugStatus(void);
+void mvCesaDebugQueue(int mode);
+void mvCesaDebugSram(int mode);
+void mvCesaDebugSAD(int mode);
+
+
+/******** CESA Private definitions ********/
+#if (MV_CESA_VERSION >= 2)
+#if (MV_CACHE_COHERENCY == MV_CACHE_COHER_SW)
+#define MV_CESA_TDMA_CTRL_VALUE MV_CESA_TDMA_DST_BURST_MASK(MV_CESA_TDMA_BURST_128B) \
+ | MV_CESA_TDMA_SRC_BURST_MASK(MV_CESA_TDMA_BURST_128B) \
+ | MV_CESA_TDMA_OUTSTAND_READ_EN_MASK \
+ | MV_CESA_TDMA_NO_BYTE_SWAP_MASK \
+ | MV_CESA_TDMA_ENABLE_MASK
+#else
+#define MV_CESA_TDMA_CTRL_VALUE MV_CESA_TDMA_DST_BURST_MASK(MV_CESA_TDMA_BURST_32B) \
+ | MV_CESA_TDMA_SRC_BURST_MASK(MV_CESA_TDMA_BURST_128B) \
+ /*| MV_CESA_TDMA_OUTSTAND_READ_EN_MASK */\
+ | MV_CESA_TDMA_ENABLE_MASK
+
+#endif
+#else
+#define MV_CESA_IDMA_CTRL_LOW_VALUE ICCLR_DST_BURST_LIM_128BYTE \
+ | ICCLR_SRC_BURST_LIM_128BYTE \
+ | ICCLR_INT_MODE_MASK \
+ | ICCLR_BLOCK_MODE \
+ | ICCLR_CHAN_ENABLE \
+ | ICCLR_DESC_MODE_16M
+#endif /* MV_CESA_VERSION >= 2 */
+
+#define MV_CESA_MAX_PKT_SIZE (64 * 1024)
+#define MV_CESA_MAX_MBUF_FRAGS 20
+
+#define MV_CESA_MAX_REQ_FRAGS ( (MV_CESA_MAX_PKT_SIZE / MV_CESA_MAX_BUF_SIZE) + 1)
+
+#define MV_CESA_MAX_DMA_DESC (MV_CESA_MAX_MBUF_FRAGS*2 + 5)
+
+#define MAX_CESA_CHAIN_LENGTH 20
+
+typedef enum
+{
+ MV_CESA_IDLE = 0,
+ MV_CESA_PENDING,
+ MV_CESA_PROCESS,
+ MV_CESA_READY,
+#if (MV_CESA_VERSION >= 3)
+ MV_CESA_CHAIN,
+#endif
+} MV_CESA_STATE;
+
+
+/* Session database */
+
+/* Map of Key materials of the session in SRAM.
+ * Each field must be 8 byte aligned
+ * Total size: 32 + 24 + 24 = 80 bytes
+ */
+typedef struct
+{
+ MV_U8 cryptoKey[MV_CESA_MAX_CRYPTO_KEY_LENGTH];
+ MV_U8 macInnerIV[MV_CESA_MAX_DIGEST_SIZE];
+ MV_U8 reservedInner[4];
+ MV_U8 macOuterIV[MV_CESA_MAX_DIGEST_SIZE];
+ MV_U8 reservedOuter[4];
+
+} MV_CESA_SRAM_SA;
+
+typedef struct
+{
+ MV_CESA_SRAM_SA* pSramSA;
+ MV_U32 config;
+ MV_U8 cryptoKeyLength;
+ MV_U8 cryptoIvSize;
+ MV_U8 cryptoBlockSize;
+ MV_U8 digestSize;
+ MV_U8 macKeyLength;
+ MV_U8 valid;
+ MV_U8 ctrMode;
+ MV_U32 count;
+
+} MV_CESA_SA;
+
+/* DMA list management */
+typedef struct
+{
+ MV_DMA_DESC* pDmaFirst;
+ MV_DMA_DESC* pDmaLast;
+
+} MV_CESA_DMA;
+
+
+typedef struct
+{
+ MV_U8 numFrag;
+ MV_U8 nextFrag;
+ int bufOffset;
+ int cryptoSize;
+ int macSize;
+ int newDigestOffset;
+ MV_U8 orgDigest[MV_CESA_MAX_DIGEST_SIZE];
+
+} MV_CESA_FRAGS;
+
+/* Request queue */
+typedef struct
+{
+ MV_U8 state;
+ MV_U8 fragMode;
+ MV_U8 fixOffset;
+ MV_CESA_COMMAND* pCmd;
+ MV_CESA_COMMAND* pOrgCmd;
+ MV_BUF_INFO dmaDescBuf;
+ MV_CESA_DMA dma[MV_CESA_MAX_REQ_FRAGS];
+ MV_BUF_INFO cesaDescBuf;
+ MV_CESA_DESC* pCesaDesc;
+ MV_CESA_FRAGS frags;
+
+
+} MV_CESA_REQ;
+
+
+/* SRAM map */
+/* Total SRAM size calculation */
+/* SRAM size =
+ * MV_CESA_MAX_BUF_SIZE +
+ * sizeof(MV_CESA_DESC) +
+ * MV_CESA_MAX_IV_LENGTH +
+ * MV_CESA_MAX_IV_LENGTH +
+ * MV_CESA_MAX_DIGEST_SIZE +
+ * sizeof(MV_CESA_SRAM_SA)
+ * = 1600 + 32 + 16 + 16 + 24 + 80 + 280 (reserved) = 2048 bytes
+ * = 3200 + 32 + 16 + 16 + 24 + 80 + 728 (reserved) = 4096 bytes
+ */
+typedef struct
+{
+ MV_U8 buf[MV_CESA_MAX_BUF_SIZE];
+ MV_CESA_DESC desc;
+ MV_U8 cryptoIV[MV_CESA_MAX_IV_LENGTH];
+ MV_U8 tempCryptoIV[MV_CESA_MAX_IV_LENGTH];
+ MV_U8 tempDigest[MV_CESA_MAX_DIGEST_SIZE+4];
+ MV_CESA_SRAM_SA sramSA;
+
+} MV_CESA_SRAM_MAP;
+
+
+typedef struct
+{
+ MV_U32 openedCount;
+ MV_U32 closedCount;
+ MV_U32 fragCount;
+ MV_U32 reqCount;
+ MV_U32 maxReqCount;
+ MV_U32 procCount;
+ MV_U32 readyCount;
+ MV_U32 notReadyCount;
+ MV_U32 startCount;
+#if (MV_CESA_VERSION >= 3)
+ MV_U32 maxChainUsage;
+#endif
+
+} MV_CESA_STATS;
+
+
+/* External variables */
+
+extern MV_CESA_STATS cesaStats;
+extern MV_CESA_FRAGS cesaFrags;
+
+extern MV_BUF_INFO cesaSramSaBuf;
+
+extern MV_CESA_SA* pCesaSAD;
+extern MV_U16 cesaMaxSA;
+
+extern MV_CESA_REQ* pCesaReqFirst;
+extern MV_CESA_REQ* pCesaReqLast;
+extern MV_CESA_REQ* pCesaReqEmpty;
+extern MV_CESA_REQ* pCesaReqProcess;
+extern int cesaQueueDepth;
+extern int cesaReqResources;
+#if (MV_CESA_VERSION>= 3)
+extern MV_U32 cesaChainLength;
+#endif
+
+extern MV_CESA_SRAM_MAP* cesaSramVirtPtr;
+extern MV_U32 cesaSramPhysAddr;
+
+static INLINE MV_ULONG mvCesaVirtToPhys(MV_BUF_INFO* pBufInfo, void* pVirt)
+{
+ return (pBufInfo->bufPhysAddr + ((MV_U8*)pVirt - pBufInfo->bufVirtPtr));
+}
+
+/* Additional DEBUG functions */
+void mvCesaDebugSramSA(MV_CESA_SRAM_SA* pSramSA, int mode);
+void mvCesaDebugCmd(MV_CESA_COMMAND* pCmd, int mode);
+void mvCesaDebugDescriptor(MV_CESA_DESC* pDesc);
+
+
+
+#endif /* __mvCesa_h__ */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mvDebug.h"
+
+#include "cesa/mvMD5.h"
+#include "cesa/mvSHA1.h"
+
+#include "cesa/mvCesa.h"
+#include "cesa/mvCesaRegs.h"
+#include "cesa/AES/mvAes.h"
+
+static const char* mvCesaDebugStateStr(MV_CESA_STATE state)
+{
+ switch(state)
+ {
+ case MV_CESA_IDLE:
+ return "Idle";
+
+ case MV_CESA_PENDING:
+ return "Pend";
+
+ case MV_CESA_PROCESS:
+ return "Proc";
+
+ case MV_CESA_READY:
+ return "Ready";
+
+ default:
+ break;
+ }
+ return "Unknown";
+}
+
+static const char* mvCesaDebugOperStr(MV_CESA_OPERATION oper)
+{
+ switch(oper)
+ {
+ case MV_CESA_MAC_ONLY:
+ return "MacOnly";
+
+ case MV_CESA_CRYPTO_ONLY:
+ return "CryptoOnly";
+
+ case MV_CESA_MAC_THEN_CRYPTO:
+ return "MacCrypto";
+
+ case MV_CESA_CRYPTO_THEN_MAC:
+ return "CryptoMac";
+
+ default:
+ break;
+ }
+ return "Null";
+}
+
+static const char* mvCesaDebugCryptoAlgStr(MV_CESA_CRYPTO_ALG cryptoAlg)
+{
+ switch(cryptoAlg)
+ {
+ case MV_CESA_CRYPTO_DES:
+ return "DES";
+
+ case MV_CESA_CRYPTO_3DES:
+ return "3DES";
+
+ case MV_CESA_CRYPTO_AES:
+ return "AES";
+
+ default:
+ break;
+ }
+ return "Null";
+}
+
+static const char* mvCesaDebugMacModeStr(MV_CESA_MAC_MODE macMode)
+{
+ switch(macMode)
+ {
+ case MV_CESA_MAC_MD5:
+ return "MD5";
+
+ case MV_CESA_MAC_SHA1:
+ return "SHA1";
+
+ case MV_CESA_MAC_HMAC_MD5:
+ return "HMAC-MD5";
+
+ case MV_CESA_MAC_HMAC_SHA1:
+ return "HMAC_SHA1";
+
+ default:
+ break;
+ }
+ return "Null";
+}
+
+void mvCesaDebugCmd(MV_CESA_COMMAND* pCmd, int mode)
+{
+ mvOsPrintf("pCmd=%p, pReqPrv=%p, pSrc=%p, pDst=%p, pCB=%p, sid=%d\n",
+ pCmd, pCmd->pReqPrv, pCmd->pSrc, pCmd->pDst,
+ pCmd->pFuncCB, pCmd->sessionId);
+ mvOsPrintf("isUser=%d, ivOffs=%d, crOffs=%d, crLen=%d, digest=%d, macOffs=%d, macLen=%d\n",
+ pCmd->ivFromUser, pCmd->ivOffset, pCmd->cryptoOffset, pCmd->cryptoLength,
+ pCmd->digestOffset, pCmd->macOffset, pCmd->macLength);
+}
+
+/* no need to use in tool */
+void mvCesaDebugMbuf(const char* str, MV_CESA_MBUF *pMbuf, int offset, int size)
+{
+ int frag, len, fragOffset;
+
+ if(str != NULL)
+ mvOsPrintf("%s: pMbuf=%p, numFrags=%d, mbufSize=%d\n",
+ str, pMbuf, pMbuf->numFrags, pMbuf->mbufSize);
+
+ frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset);
+ if(frag == MV_INVALID)
+ {
+ mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+ return;
+ }
+
+ for(; frag<pMbuf->numFrags; frag++)
+ {
+ mvOsPrintf("#%2d. bufVirt=%p, bufSize=%d\n",
+ frag, pMbuf->pFrags[frag].bufVirtPtr,
+ pMbuf->pFrags[frag].bufSize);
+ if(size > 0)
+ {
+ len = MV_MIN(pMbuf->pFrags[frag].bufSize, size);
+ mvDebugMemDump(pMbuf->pFrags[frag].bufVirtPtr+fragOffset, len, 1);
+ size -= len;
+ fragOffset = 0;
+ }
+ }
+}
+
+void mvCesaDebugRegs(void)
+{
+ mvOsPrintf("\t CESA Registers:\n");
+
+ mvOsPrintf("MV_CESA_CMD_REG : 0x%X = 0x%08x\n",
+ MV_CESA_CMD_REG,
+ MV_REG_READ( MV_CESA_CMD_REG ) );
+
+ mvOsPrintf("MV_CESA_CHAN_DESC_OFFSET_REG : 0x%X = 0x%08x\n",
+ MV_CESA_CHAN_DESC_OFFSET_REG,
+ MV_REG_READ(MV_CESA_CHAN_DESC_OFFSET_REG) );
+
+ mvOsPrintf("MV_CESA_CFG_REG : 0x%X = 0x%08x\n",
+ MV_CESA_CFG_REG,
+ MV_REG_READ( MV_CESA_CFG_REG ) );
+
+ mvOsPrintf("MV_CESA_STATUS_REG : 0x%X = 0x%08x\n",
+ MV_CESA_STATUS_REG,
+ MV_REG_READ( MV_CESA_STATUS_REG ) );
+
+ mvOsPrintf("MV_CESA_ISR_CAUSE_REG : 0x%X = 0x%08x\n",
+ MV_CESA_ISR_CAUSE_REG,
+ MV_REG_READ( MV_CESA_ISR_CAUSE_REG ) );
+
+ mvOsPrintf("MV_CESA_ISR_MASK_REG : 0x%X = 0x%08x\n",
+ MV_CESA_ISR_MASK_REG,
+ MV_REG_READ( MV_CESA_ISR_MASK_REG ) );
+#if (MV_CESA_VERSION >= 2)
+ mvOsPrintf("MV_CESA_TDMA_CTRL_REG : 0x%X = 0x%08x\n",
+ MV_CESA_TDMA_CTRL_REG,
+ MV_REG_READ( MV_CESA_TDMA_CTRL_REG ) );
+
+ mvOsPrintf("MV_CESA_TDMA_BYTE_COUNT_REG : 0x%X = 0x%08x\n",
+ MV_CESA_TDMA_BYTE_COUNT_REG,
+ MV_REG_READ( MV_CESA_TDMA_BYTE_COUNT_REG ) );
+
+ mvOsPrintf("MV_CESA_TDMA_SRC_ADDR_REG : 0x%X = 0x%08x\n",
+ MV_CESA_TDMA_SRC_ADDR_REG,
+ MV_REG_READ( MV_CESA_TDMA_SRC_ADDR_REG ) );
+
+ mvOsPrintf("MV_CESA_TDMA_DST_ADDR_REG : 0x%X = 0x%08x\n",
+ MV_CESA_TDMA_DST_ADDR_REG,
+ MV_REG_READ( MV_CESA_TDMA_DST_ADDR_REG ) );
+
+ mvOsPrintf("MV_CESA_TDMA_NEXT_DESC_PTR_REG : 0x%X = 0x%08x\n",
+ MV_CESA_TDMA_NEXT_DESC_PTR_REG,
+ MV_REG_READ( MV_CESA_TDMA_NEXT_DESC_PTR_REG ) );
+
+ mvOsPrintf("MV_CESA_TDMA_CURR_DESC_PTR_REG : 0x%X = 0x%08x\n",
+ MV_CESA_TDMA_CURR_DESC_PTR_REG,
+ MV_REG_READ( MV_CESA_TDMA_CURR_DESC_PTR_REG ) );
+
+ mvOsPrintf("MV_CESA_TDMA_ERROR_CAUSE_REG : 0x%X = 0x%08x\n",
+ MV_CESA_TDMA_ERROR_CAUSE_REG,
+ MV_REG_READ( MV_CESA_TDMA_ERROR_CAUSE_REG ) );
+
+ mvOsPrintf("MV_CESA_TDMA_ERROR_MASK_REG : 0x%X = 0x%08x\n",
+ MV_CESA_TDMA_ERROR_MASK_REG,
+ MV_REG_READ( MV_CESA_TDMA_ERROR_CAUSE_REG ) );
+
+#endif
+}
+
+void mvCesaDebugStatus(void)
+{
+ mvOsPrintf("\n\t CESA Status\n\n");
+
+ mvOsPrintf("pReqQ=%p, qDepth=%d, reqSize=%ld bytes, qRes=%d, ",
+ pCesaReqFirst, cesaQueueDepth, sizeof(MV_CESA_REQ),
+ cesaReqResources);
+#if (MV_CESA_VERSION >= 3)
+ mvOsPrintf("chainLength=%u\n",cesaChainLength);
+#else
+ mvOsPrintf("\n");
+#endif
+
+ mvOsPrintf("pSAD=%p, maxSA=%d, sizeSA=%ld bytes\n",
+ pCesaSAD, cesaMaxSA, sizeof(MV_CESA_SA));
+
+ mvOsPrintf("\n");
+
+ mvCesaDebugRegs();
+ mvCesaDebugStats();
+ mvCesaDebugStatsClear();
+}
+
+void mvCesaDebugDescriptor(MV_CESA_DESC* pDesc)
+{
+ mvOsPrintf("config=0x%08x, crSrcOffs=0x%04x, crDstOffs=0x%04x\n",
+ pDesc->config, pDesc->cryptoSrcOffset, pDesc->cryptoDstOffset);
+
+ mvOsPrintf("crLen=0x%04x, crKeyOffs=0x%04x, ivOffs=0x%04x, ivBufOffs=0x%04x\n",
+ pDesc->cryptoDataLen, pDesc->cryptoKeyOffset,
+ pDesc->cryptoIvOffset, pDesc->cryptoIvBufOffset);
+
+ mvOsPrintf("macSrc=0x%04x, digest=0x%04x, macLen=0x%04x, inIv=0x%04x, outIv=0x%04x\n",
+ pDesc->macSrcOffset, pDesc->macDigestOffset, pDesc->macDataLen,
+ pDesc->macInnerIvOffset, pDesc->macOuterIvOffset);
+}
+
+void mvCesaDebugQueue(int mode)
+{
+ mvOsPrintf("\n\t CESA Request Queue:\n\n");
+
+ mvOsPrintf("pFirstReq=%p, pLastReq=%p, qDepth=%d, reqSize=%ld bytes\n",
+ pCesaReqFirst, pCesaReqLast, cesaQueueDepth, sizeof(MV_CESA_REQ));
+
+ mvOsPrintf("pEmpty=%p, pProcess=%p, qResources=%d\n",
+ pCesaReqEmpty, pCesaReqProcess,
+ cesaReqResources);
+
+ if(mode != 0)
+ {
+ int count = 0;
+ MV_CESA_REQ* pReq = pCesaReqFirst;
+
+ for(count=0; count<cesaQueueDepth; count++)
+ {
+ /* Print out requsts */
+ mvOsPrintf("%02d. pReq=%p, state=%s, frag=0x%x, pCmd=%p, pDma=%p, pDesc=%p\n",
+ count, pReq, mvCesaDebugStateStr(pReq->state),
+ pReq->fragMode, pReq->pCmd, pReq->dma[0].pDmaFirst, &pReq->pCesaDesc[0]);
+ if(pReq->fragMode != MV_CESA_FRAG_NONE)
+ {
+ int frag;
+
+ mvOsPrintf("pFrags=%p, num=%d, next=%d, bufOffset=%d, cryptoSize=%d, macSize=%d\n",
+ &pReq->frags, pReq->frags.numFrag, pReq->frags.nextFrag,
+ pReq->frags.bufOffset, pReq->frags.cryptoSize, pReq->frags.macSize);
+ for(frag=0; frag<pReq->frags.numFrag; frag++)
+ {
+ mvOsPrintf("#%d: pDmaFirst=%p, pDesc=%p\n", frag,
+ pReq->dma[frag].pDmaFirst, &pReq->pCesaDesc[frag]);
+ }
+ }
+ if(mode > 1)
+ {
+ /* Print out Command */
+ mvCesaDebugCmd(pReq->pCmd, mode);
+
+ /* Print out Descriptor */
+ mvCesaDebugDescriptor(&pReq->pCesaDesc[0]);
+ }
+ pReq++;
+ }
+ }
+}
+
+
+void mvCesaDebugSramSA(MV_CESA_SRAM_SA* pSramSA, int mode)
+{
+ if(pSramSA == NULL)
+ {
+ mvOsPrintf("cesaSramSA: Unexpected pSramSA=%p\n", pSramSA);
+ return;
+ }
+ mvOsPrintf("pSramSA=%p, sizeSramSA=%ld bytes\n",
+ pSramSA, sizeof(MV_CESA_SRAM_SA));
+
+ if(mode != 0)
+ {
+ mvOsPrintf("cryptoKey=%p, maxCryptoKey=%d bytes\n",
+ pSramSA->cryptoKey, MV_CESA_MAX_CRYPTO_KEY_LENGTH);
+ mvDebugMemDump(pSramSA->cryptoKey, MV_CESA_MAX_CRYPTO_KEY_LENGTH, 1);
+
+ mvOsPrintf("macInnerIV=%p, maxInnerIV=%d bytes\n",
+ pSramSA->macInnerIV, MV_CESA_MAX_DIGEST_SIZE);
+ mvDebugMemDump(pSramSA->macInnerIV, MV_CESA_MAX_DIGEST_SIZE, 1);
+
+ mvOsPrintf("macOuterIV=%p, maxOuterIV=%d bytes\n",
+ pSramSA->macOuterIV, MV_CESA_MAX_DIGEST_SIZE);
+ mvDebugMemDump(pSramSA->macOuterIV, MV_CESA_MAX_DIGEST_SIZE, 1);
+ }
+}
+
+void mvCesaDebugSA(short sid, int mode)
+{
+ MV_CESA_OPERATION oper;
+ MV_CESA_DIRECTION dir;
+ MV_CESA_CRYPTO_ALG cryptoAlg;
+ MV_CESA_CRYPTO_MODE cryptoMode;
+ MV_CESA_MAC_MODE macMode;
+ MV_CESA_SA* pSA = &pCesaSAD[sid];
+
+ if( (pSA->valid) || ((pSA->count != 0) && (mode > 0)) || (mode >= 2) )
+ {
+ mvOsPrintf("\n\nCESA SA Entry #%d (%p) - %s (count=%d)\n",
+ sid, pSA,
+ pSA->valid ? "Valid" : "Invalid", pSA->count);
+
+ oper = (pSA->config & MV_CESA_OPERATION_MASK) >> MV_CESA_OPERATION_OFFSET;
+ dir = (pSA->config & MV_CESA_DIRECTION_MASK) >> MV_CESA_DIRECTION_BIT;
+ mvOsPrintf("%s - %s ", mvCesaDebugOperStr(oper),
+ (dir == MV_CESA_DIR_ENCODE) ? "Encode" : "Decode");
+ if(oper != MV_CESA_MAC_ONLY)
+ {
+ cryptoAlg = (pSA->config & MV_CESA_CRYPTO_ALG_MASK) >> MV_CESA_CRYPTO_ALG_OFFSET;
+ cryptoMode = (pSA->config & MV_CESA_CRYPTO_MODE_MASK) >> MV_CESA_CRYPTO_MODE_BIT;
+ mvOsPrintf("- %s - %s ", mvCesaDebugCryptoAlgStr(cryptoAlg),
+ (cryptoMode == MV_CESA_CRYPTO_ECB) ? "ECB" : "CBC");
+ }
+ if(oper != MV_CESA_CRYPTO_ONLY)
+ {
+ macMode = (pSA->config & MV_CESA_MAC_MODE_MASK) >> MV_CESA_MAC_MODE_OFFSET;
+ mvOsPrintf("- %s ", mvCesaDebugMacModeStr(macMode));
+ }
+ mvOsPrintf("\n");
+
+ if(mode > 0)
+ {
+ mvOsPrintf("config=0x%08x, cryptoKeySize=%d, digestSize=%d\n",
+ pCesaSAD[sid].config, pCesaSAD[sid].cryptoKeyLength,
+ pCesaSAD[sid].digestSize);
+
+ mvCesaDebugSramSA(pCesaSAD[sid].pSramSA, mode);
+ }
+ }
+}
+
+
+/**/
+void mvCesaDebugSram(int mode)
+{
+ mvOsPrintf("\n\t SRAM contents: size=%ld, pVirt=%p\n\n",
+ sizeof(MV_CESA_SRAM_MAP), cesaSramVirtPtr);
+
+ mvOsPrintf("\n\t Sram buffer: size=%d, pVirt=%p\n",
+ MV_CESA_MAX_BUF_SIZE, cesaSramVirtPtr->buf);
+ if(mode != 0)
+ mvDebugMemDump(cesaSramVirtPtr->buf, 64, 1);
+
+ mvOsPrintf("\n");
+ mvOsPrintf("\n\t Sram descriptor: size=%ld, pVirt=%p\n",
+ sizeof(MV_CESA_DESC), &cesaSramVirtPtr->desc);
+ if(mode != 0)
+ {
+ mvOsPrintf("\n");
+ mvCesaDebugDescriptor(&cesaSramVirtPtr->desc);
+ }
+ mvOsPrintf("\n\t Sram IV: size=%d, pVirt=%p\n",
+ MV_CESA_MAX_IV_LENGTH, &cesaSramVirtPtr->cryptoIV);
+ if(mode != 0)
+ {
+ mvOsPrintf("\n");
+ mvDebugMemDump(cesaSramVirtPtr->cryptoIV, MV_CESA_MAX_IV_LENGTH, 1);
+ }
+ mvOsPrintf("\n");
+ mvCesaDebugSramSA(&cesaSramVirtPtr->sramSA, 0);
+}
+
+void mvCesaDebugSAD(int mode)
+{
+ int sid;
+
+ mvOsPrintf("\n\t Cesa SAD status: pSAD=%p, maxSA=%d\n",
+ pCesaSAD, cesaMaxSA);
+
+ for(sid=0; sid<cesaMaxSA; sid++)
+ {
+ mvCesaDebugSA(sid, mode);
+ }
+}
+
+void mvCesaDebugStats(void)
+{
+ mvOsPrintf("\n\t Cesa Statistics\n");
+
+ mvOsPrintf("Opened=%u, Closed=%u\n",
+ cesaStats.openedCount, cesaStats.closedCount);
+ mvOsPrintf("Req=%u, maxReq=%u, frags=%u, start=%u\n",
+ cesaStats.reqCount, cesaStats.maxReqCount,
+ cesaStats.fragCount, cesaStats.startCount);
+#if (MV_CESA_VERSION >= 3)
+ mvOsPrintf("maxChainUsage=%u\n",cesaStats.maxChainUsage);
+#endif
+ mvOsPrintf("\n");
+ mvOsPrintf("proc=%u, ready=%u, notReady=%u\n",
+ cesaStats.procCount, cesaStats.readyCount, cesaStats.notReadyCount);
+}
+
+void mvCesaDebugStatsClear(void)
+{
+ memset(&cesaStats, 0, sizeof(cesaStats));
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __mvCesaRegs_h__
+#define __mvCesaRegs_h__
+
+#include "mvTypes.h"
+
+typedef struct
+{
+ /* word 0 */
+ MV_U32 config;
+ /* word 1 */
+ MV_U16 cryptoSrcOffset;
+ MV_U16 cryptoDstOffset;
+ /* word 2 */
+ MV_U16 cryptoDataLen;
+ MV_U16 reserved1;
+ /* word 3 */
+ MV_U16 cryptoKeyOffset;
+ MV_U16 reserved2;
+ /* word 4 */
+ MV_U16 cryptoIvOffset;
+ MV_U16 cryptoIvBufOffset;
+ /* word 5 */
+ MV_U16 macSrcOffset;
+ MV_U16 macTotalLen;
+ /* word 6 */
+ MV_U16 macDigestOffset;
+ MV_U16 macDataLen;
+ /* word 7 */
+ MV_U16 macInnerIvOffset;
+ MV_U16 macOuterIvOffset;
+
+} MV_CESA_DESC;
+
+/* operation */
+typedef enum
+{
+ MV_CESA_MAC_ONLY = 0,
+ MV_CESA_CRYPTO_ONLY = 1,
+ MV_CESA_MAC_THEN_CRYPTO = 2,
+ MV_CESA_CRYPTO_THEN_MAC = 3,
+
+ MV_CESA_MAX_OPERATION
+
+} MV_CESA_OPERATION;
+
+#define MV_CESA_OPERATION_OFFSET 0
+#define MV_CESA_OPERATION_MASK (0x3 << MV_CESA_OPERATION_OFFSET)
+
+/* mac algorithm */
+typedef enum
+{
+ MV_CESA_MAC_NULL = 0,
+ MV_CESA_MAC_MD5 = 4,
+ MV_CESA_MAC_SHA1 = 5,
+ MV_CESA_MAC_HMAC_MD5 = 6,
+ MV_CESA_MAC_HMAC_SHA1 = 7,
+
+} MV_CESA_MAC_MODE;
+
+#define MV_CESA_MAC_MODE_OFFSET 4
+#define MV_CESA_MAC_MODE_MASK (0x7 << MV_CESA_MAC_MODE_OFFSET)
+
+typedef enum
+{
+ MV_CESA_MAC_DIGEST_FULL = 0,
+ MV_CESA_MAC_DIGEST_96B = 1,
+
+} MV_CESA_MAC_DIGEST_SIZE;
+
+#define MV_CESA_MAC_DIGEST_SIZE_BIT 7
+#define MV_CESA_MAC_DIGEST_SIZE_MASK (1 << MV_CESA_MAC_DIGEST_SIZE_BIT)
+
+
+typedef enum
+{
+ MV_CESA_CRYPTO_NULL = 0,
+ MV_CESA_CRYPTO_DES = 1,
+ MV_CESA_CRYPTO_3DES = 2,
+ MV_CESA_CRYPTO_AES = 3,
+
+} MV_CESA_CRYPTO_ALG;
+
+#define MV_CESA_CRYPTO_ALG_OFFSET 8
+#define MV_CESA_CRYPTO_ALG_MASK (0x3 << MV_CESA_CRYPTO_ALG_OFFSET)
+
+
+/* direction */
+typedef enum
+{
+ MV_CESA_DIR_ENCODE = 0,
+ MV_CESA_DIR_DECODE = 1,
+
+} MV_CESA_DIRECTION;
+
+#define MV_CESA_DIRECTION_BIT 12
+#define MV_CESA_DIRECTION_MASK (1 << MV_CESA_DIRECTION_BIT)
+
+/* crypto IV mode */
+typedef enum
+{
+ MV_CESA_CRYPTO_ECB = 0,
+ MV_CESA_CRYPTO_CBC = 1,
+
+ /* NO HW Support */
+ MV_CESA_CRYPTO_CTR = 10,
+
+} MV_CESA_CRYPTO_MODE;
+
+#define MV_CESA_CRYPTO_MODE_BIT 16
+#define MV_CESA_CRYPTO_MODE_MASK (1 << MV_CESA_CRYPTO_MODE_BIT)
+
+/* 3DES mode */
+typedef enum
+{
+ MV_CESA_CRYPTO_3DES_EEE = 0,
+ MV_CESA_CRYPTO_3DES_EDE = 1,
+
+} MV_CESA_CRYPTO_3DES_MODE;
+
+#define MV_CESA_CRYPTO_3DES_MODE_BIT 20
+#define MV_CESA_CRYPTO_3DES_MODE_MASK (1 << MV_CESA_CRYPTO_3DES_MODE_BIT)
+
+
+/* AES Key Length */
+typedef enum
+{
+ MV_CESA_CRYPTO_AES_KEY_128 = 0,
+ MV_CESA_CRYPTO_AES_KEY_192 = 1,
+ MV_CESA_CRYPTO_AES_KEY_256 = 2,
+
+} MV_CESA_CRYPTO_AES_KEY_LEN;
+
+#define MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET 24
+#define MV_CESA_CRYPTO_AES_KEY_LEN_MASK (0x3 << MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET)
+
+/* Fragmentation mode */
+typedef enum
+{
+ MV_CESA_FRAG_NONE = 0,
+ MV_CESA_FRAG_FIRST = 1,
+ MV_CESA_FRAG_LAST = 2,
+ MV_CESA_FRAG_MIDDLE = 3,
+
+} MV_CESA_FRAG_MODE;
+
+#define MV_CESA_FRAG_MODE_OFFSET 30
+#define MV_CESA_FRAG_MODE_MASK (0x3 << MV_CESA_FRAG_MODE_OFFSET)
+/*---------------------------------------------------------------------------*/
+
+/********** Security Accelerator Command Register **************/
+#define MV_CESA_CMD_REG (MV_CESA_REG_BASE + 0xE00)
+
+#define MV_CESA_CMD_CHAN_ENABLE_BIT 0
+#define MV_CESA_CMD_CHAN_ENABLE_MASK (1 << MV_CESA_CMD_CHAN_ENABLE_BIT)
+
+#define MV_CESA_CMD_CHAN_DISABLE_BIT 2
+#define MV_CESA_CMD_CHAN_DISABLE_MASK (1 << MV_CESA_CMD_CHAN_DISABLE_BIT)
+
+/********** Security Accelerator Descriptor Pointers Register **********/
+#define MV_CESA_CHAN_DESC_OFFSET_REG (MV_CESA_REG_BASE + 0xE04)
+
+/********** Security Accelerator Configuration Register **********/
+#define MV_CESA_CFG_REG (MV_CESA_REG_BASE + 0xE08)
+
+#define MV_CESA_CFG_STOP_DIGEST_ERR_BIT 0
+#define MV_CESA_CFG_STOP_DIGEST_ERR_MASK (1 << MV_CESA_CFG_STOP_DIGEST_ERR_BIT)
+
+#define MV_CESA_CFG_WAIT_DMA_BIT 7
+#define MV_CESA_CFG_WAIT_DMA_MASK (1 << MV_CESA_CFG_WAIT_DMA_BIT)
+
+#define MV_CESA_CFG_ACT_DMA_BIT 9
+#define MV_CESA_CFG_ACT_DMA_MASK (1 << MV_CESA_CFG_ACT_DMA_BIT)
+
+#define MV_CESA_CFG_CHAIN_MODE_BIT 11
+#define MV_CESA_CFG_CHAIN_MODE_MASK (1 << MV_CESA_CFG_CHAIN_MODE_BIT)
+
+/********** Security Accelerator Status Register ***********/
+#define MV_CESA_STATUS_REG (MV_CESA_REG_BASE + 0xE0C)
+
+#define MV_CESA_STATUS_ACTIVE_BIT 0
+#define MV_CESA_STATUS_ACTIVE_MASK (1 << MV_CESA_STATUS_ACTIVE_BIT)
+
+#define MV_CESA_STATUS_DIGEST_ERR_BIT 8
+#define MV_CESA_STATUS_DIGEST_ERR_MASK (1 << MV_CESA_STATUS_DIGEST_ERR_BIT)
+
+
+/* Cryptographic Engines and Security Accelerator Interrupt Cause Register */
+#define MV_CESA_ISR_CAUSE_REG (MV_CESA_REG_BASE + 0xE20)
+
+/* Cryptographic Engines and Security Accelerator Interrupt Mask Register */
+#define MV_CESA_ISR_MASK_REG (MV_CESA_REG_BASE + 0xE24)
+
+#define MV_CESA_CAUSE_AUTH_MASK (1 << 0)
+#define MV_CESA_CAUSE_DES_MASK (1 << 1)
+#define MV_CESA_CAUSE_AES_ENCR_MASK (1 << 2)
+#define MV_CESA_CAUSE_AES_DECR_MASK (1 << 3)
+#define MV_CESA_CAUSE_DES_ALL_MASK (1 << 4)
+
+#define MV_CESA_CAUSE_ACC_BIT 5
+#define MV_CESA_CAUSE_ACC_MASK (1 << MV_CESA_CAUSE_ACC_BIT)
+
+#define MV_CESA_CAUSE_ACC_DMA_BIT 7
+#define MV_CESA_CAUSE_ACC_DMA_MASK (1 << MV_CESA_CAUSE_ACC_DMA_BIT)
+#define MV_CESA_CAUSE_ACC_DMA_ALL_MASK (3 << MV_CESA_CAUSE_ACC_DMA_BIT)
+
+#define MV_CESA_CAUSE_DMA_COMPL_BIT 9
+#define MV_CESA_CAUSE_DMA_COMPL_MASK (1 << MV_CESA_CAUSE_DMA_COMPL_BIT)
+
+#define MV_CESA_CAUSE_DMA_OWN_ERR_BIT 10
+#define MV_CESA_CAUSE_DMA_OWN_ERR_MASK (1 < MV_CESA_CAUSE_DMA_OWN_ERR_BIT)
+
+#define MV_CESA_CAUSE_DMA_CHAIN_PKT_BIT 11
+#define MV_CESA_CAUSE_DMA_CHAIN_PKT_MASK (1 < MV_CESA_CAUSE_DMA_CHAIN_PKT_BIT)
+
+
+#define MV_CESA_AUTH_DATA_IN_REG (MV_CESA_REG_BASE + 0xd38)
+#define MV_CESA_AUTH_BIT_COUNT_LOW_REG (MV_CESA_REG_BASE + 0xd20)
+#define MV_CESA_AUTH_BIT_COUNT_HIGH_REG (MV_CESA_REG_BASE + 0xd24)
+
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_REG(i) (MV_CESA_REG_BASE + 0xd00 + (i<<2))
+
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_A_REG (MV_CESA_REG_BASE + 0xd00)
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_B_REG (MV_CESA_REG_BASE + 0xd04)
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_C_REG (MV_CESA_REG_BASE + 0xd08)
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_D_REG (MV_CESA_REG_BASE + 0xd0c)
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_E_REG (MV_CESA_REG_BASE + 0xd10)
+#define MV_CESA_AUTH_COMMAND_REG (MV_CESA_REG_BASE + 0xd18)
+
+#define MV_CESA_AUTH_ALGORITHM_BIT 0
+#define MV_CESA_AUTH_ALGORITHM_MD5 (0<<AUTH_ALGORITHM_BIT)
+#define MV_CESA_AUTH_ALGORITHM_SHA1 (1<<AUTH_ALGORITHM_BIT)
+
+#define MV_CESA_AUTH_IV_MODE_BIT 1
+#define MV_CESA_AUTH_IV_MODE_INIT (0<<AUTH_IV_MODE_BIT)
+#define MV_CESA_AUTH_IV_MODE_CONTINUE (1<<AUTH_IV_MODE_BIT)
+
+#define MV_CESA_AUTH_DATA_BYTE_SWAP_BIT 2
+#define MV_CESA_AUTH_DATA_BYTE_SWAP_MASK (1<<AUTH_DATA_BYTE_SWAP_BIT)
+
+
+#define MV_CESA_AUTH_IV_BYTE_SWAP_BIT 4
+#define MV_CESA_AUTH_IV_BYTE_SWAP_MASK (1<<AUTH_IV_BYTE_SWAP_BIT)
+
+#define MV_CESA_AUTH_TERMINATION_BIT 31
+#define MV_CESA_AUTH_TERMINATION_MASK (1<<AUTH_TERMINATION_BIT)
+
+
+/*************** TDMA Control Register ************************************************/
+#define MV_CESA_TDMA_CTRL_REG (MV_CESA_TDMA_REG_BASE + 0x840)
+
+#define MV_CESA_TDMA_BURST_32B 3
+#define MV_CESA_TDMA_BURST_128B 4
+
+#define MV_CESA_TDMA_DST_BURST_OFFSET 0
+#define MV_CESA_TDMA_DST_BURST_ALL_MASK (0x7<<MV_CESA_TDMA_DST_BURST_OFFSET)
+#define MV_CESA_TDMA_DST_BURST_MASK(burst) ((burst)<<MV_CESA_TDMA_DST_BURST_OFFSET)
+
+#define MV_CESA_TDMA_OUTSTAND_READ_EN_BIT 4
+#define MV_CESA_TDMA_OUTSTAND_READ_EN_MASK (1<<MV_CESA_TDMA_OUTSTAND_READ_EN_BIT)
+
+#define MV_CESA_TDMA_SRC_BURST_OFFSET 6
+#define MV_CESA_TDMA_SRC_BURST_ALL_MASK (0x7<<MV_CESA_TDMA_SRC_BURST_OFFSET)
+#define MV_CESA_TDMA_SRC_BURST_MASK(burst) ((burst)<<MV_CESA_TDMA_SRC_BURST_OFFSET)
+
+#define MV_CESA_TDMA_CHAIN_MODE_BIT 9
+#define MV_CESA_TDMA_NON_CHAIN_MODE_MASK (1<<MV_CESA_TDMA_CHAIN_MODE_BIT)
+
+#define MV_CESA_TDMA_BYTE_SWAP_BIT 11
+#define MV_CESA_TDMA_BYTE_SWAP_MASK (0 << MV_CESA_TDMA_BYTE_SWAP_BIT)
+#define MV_CESA_TDMA_NO_BYTE_SWAP_MASK (1 << MV_CESA_TDMA_BYTE_SWAP_BIT)
+
+#define MV_CESA_TDMA_ENABLE_BIT 12
+#define MV_CESA_TDMA_ENABLE_MASK (1<<MV_CESA_TDMA_ENABLE_BIT)
+
+#define MV_CESA_TDMA_FETCH_NEXT_DESC_BIT 13
+#define MV_CESA_TDMA_FETCH_NEXT_DESC_MASK (1<<MV_CESA_TDMA_FETCH_NEXT_DESC_BIT)
+
+#define MV_CESA_TDMA_CHAN_ACTIVE_BIT 14
+#define MV_CESA_TDMA_CHAN_ACTIVE_MASK (1<<MV_CESA_TDMA_CHAN_ACTIVE_BIT)
+/*------------------------------------------------------------------------------------*/
+
+#define MV_CESA_TDMA_BYTE_COUNT_REG (MV_CESA_TDMA_REG_BASE + 0x800)
+#define MV_CESA_TDMA_SRC_ADDR_REG (MV_CESA_TDMA_REG_BASE + 0x810)
+#define MV_CESA_TDMA_DST_ADDR_REG (MV_CESA_TDMA_REG_BASE + 0x820)
+#define MV_CESA_TDMA_NEXT_DESC_PTR_REG (MV_CESA_TDMA_REG_BASE + 0x830)
+#define MV_CESA_TDMA_CURR_DESC_PTR_REG (MV_CESA_TDMA_REG_BASE + 0x870)
+
+#define MV_CESA_TDMA_ERROR_CAUSE_REG (MV_CESA_TDMA_REG_BASE + 0x8C0)
+#define MV_CESA_TDMA_ERROR_MASK_REG (MV_CESA_TDMA_REG_BASE + 0x8C4)
+
+
+#endif /* __mvCesaRegs_h__ */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+
+#if defined(MV_VXWORKS)
+
+#include "sysLib.h"
+#include "logLib.h"
+#include "tickLib.h"
+#include "intLib.h"
+#include "config.h"
+
+
+SEM_ID cesaSemId = NULL;
+SEM_ID cesaWaitSemId = NULL;
+
+#define CESA_TEST_LOCK(flags) flags = intLock()
+#define CESA_TEST_UNLOCK(flags) intUnlock(flags)
+
+#define CESA_TEST_WAIT_INIT() cesaWaitSemId = semBCreate(SEM_Q_PRIORITY, SEM_EMPTY)
+#define CESA_TEST_WAKE_UP() semGive(cesaWaitSemId)
+#define CESA_TEST_WAIT(cond, ms) semTake(cesaWaitSemId, (sysClkRateGet()*ms)/1000)
+
+#define CESA_TEST_TICK_GET() tickGet()
+#define CESA_TEST_TICK_TO_MS(tick) (((tick)*1000)/sysClkRateGet())
+
+#elif defined(MV_LINUX)
+
+#include <linux/wait.h>
+wait_queue_head_t cesaTest_waitq;
+spinlock_t cesaLock;
+
+#define CESA_TEST_LOCK(flags) spin_lock_irqsave( &cesaLock, flags)
+#define CESA_TEST_UNLOCK(flags) spin_unlock_irqrestore( &cesaLock, flags);
+
+#define CESA_TEST_WAIT_INIT() init_waitqueue_head(&cesaTest_waitq)
+#define CESA_TEST_WAKE_UP() wake_up(&cesaTest_waitq)
+#define CESA_TEST_WAIT(cond, ms) wait_event_timeout(cesaTest_waitq, (cond), msecs_to_jiffies(ms))
+
+#define CESA_TEST_TICK_GET() jiffies
+#define CESA_TEST_TICK_TO_MS(tick) jiffies_to_msecs(tick)
+
+#elif defined(MV_NETBSD)
+
+#include <sys/param.h>
+#include <sys/kernel.h>
+static int cesaLock;
+
+#define CESA_TEST_LOCK(flags) flags = splnet()
+#define CESA_TEST_UNLOCK(flags) splx(flags)
+
+#define CESA_TEST_WAIT_INIT() /* nothing */
+#define CESA_TEST_WAKE_UP() wakeup(&cesaLock)
+#define CESA_TEST_WAIT(cond, ms) \
+do { \
+ while (!(cond)) \
+ tsleep(&cesaLock, PWAIT, "cesatest",mstohz(ms)); \
+} while (/*CONSTCOND*/0)
+
+#define CESA_TEST_TICK_GET() hardclock_ticks
+#define CESA_TEST_TICK_TO_MS(tick) ((1000/hz)*(tick))
+
+#define request_irq(i,h,t,n,a) \
+ !mv_intr_establish((i),IPL_NET,(int(*)(void *))(h),(a))
+
+#else
+#error "Only Linux, VxWorks, or NetBSD OS are supported"
+#endif
+
+#include "mvDebug.h"
+
+#include "mvSysHwConfig.h"
+#include "boardEnv/mvBoardEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "cntmr/mvCntmr.h"
+#include "cesa/mvCesa.h"
+#include "cesa/mvCesaRegs.h"
+#include "cesa/mvMD5.h"
+#include "cesa/mvSHA1.h"
+
+#if defined(CONFIG_MV646xx)
+#include "marvell_pic.h"
+#endif
+
+#define MV_CESA_USE_TIMER_ID 0
+#define CESA_DEF_BUF_SIZE 1500
+#define CESA_DEF_BUF_NUM 1
+#define CESA_DEF_SESSION_NUM 32
+
+#define CESA_DEF_ITER_NUM 100
+
+#define CESA_DEF_REQ_SIZE 256
+
+
+/* CESA Tests Debug */
+#undef CESA_TEST_DEBUG
+
+#ifdef CESA_TEST_DEBUG
+
+# define CESA_TEST_DEBUG_PRINT(msg) mvOsPrintf msg
+# define CESA_TEST_DEBUG_CODE(code) code
+
+typedef struct
+{
+ int type; /* 0 - isrEmpty, 1 - cesaReadyGet, 2 - cesaAction */
+ MV_U32 timeStamp;
+ MV_U32 cause;
+ MV_U32 realCause;
+ MV_U32 dmaCause;
+ int resources;
+ MV_CESA_REQ* pReqReady;
+ MV_CESA_REQ* pReqEmpty;
+ MV_CESA_REQ* pReqProcess;
+} MV_CESA_TEST_TRACE;
+
+#define MV_CESA_TEST_TRACE_SIZE 25
+
+static int cesaTestTraceIdx = 0;
+static MV_CESA_TEST_TRACE cesaTestTrace[MV_CESA_TEST_TRACE_SIZE];
+
+static void cesaTestTraceAdd(int type, MV_U32 cause)
+{
+ cesaTestTrace[cesaTestTraceIdx].type = type;
+ cesaTestTrace[cesaTestTraceIdx].cause = cause;
+ cesaTestTrace[cesaTestTraceIdx].realCause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG);
+ cesaTestTrace[cesaTestTraceIdx].dmaCause = MV_REG_READ(IDMA_CAUSE_REG);
+ cesaTestTrace[cesaTestTraceIdx].resources = cesaReqResources;
+ cesaTestTrace[cesaTestTraceIdx].pReqReady = pCesaReqReady;
+ cesaTestTrace[cesaTestTraceIdx].pReqEmpty = pCesaReqEmpty;
+ cesaTestTrace[cesaTestTraceIdx].pReqProcess = pCesaReqProcess;
+ cesaTestTrace[cesaTestTraceIdx].timeStamp = mvCntmrRead(MV_CESA_USE_TIMER_ID);
+ cesaTestTraceIdx++;
+ if(cesaTestTraceIdx == MV_CESA_TEST_TRACE_SIZE)
+ cesaTestTraceIdx = 0;
+}
+
+#else
+
+# define CESA_TEST_DEBUG_PRINT(msg)
+# define CESA_TEST_DEBUG_CODE(code)
+
+#endif /* CESA_TEST_DEBUG */
+
+int cesaExpReqId=0;
+int cesaCbIter=0;
+
+int cesaIdx;
+int cesaIteration;
+int cesaRateSize;
+int cesaReqSize;
+unsigned long cesaTaskId;
+int cesaBufNum;
+int cesaBufSize;
+int cesaCheckOffset;
+int cesaCheckSize;
+int cesaCheckMode;
+int cesaTestIdx;
+int cesaCaseIdx;
+
+
+MV_U32 cesaTestIsrCount = 0;
+MV_U32 cesaTestIsrMissCount = 0;
+
+MV_U32 cesaCryptoError = 0;
+MV_U32 cesaReqIdError = 0;
+MV_U32 cesaError = 0;
+
+char* cesaHexBuffer = NULL;
+
+char* cesaBinBuffer = NULL;
+char* cesaExpBinBuffer = NULL;
+
+char* cesaInputHexStr = NULL;
+char* cesaOutputHexStr = NULL;
+
+MV_BUF_INFO cesaReqBufs[CESA_DEF_REQ_SIZE];
+
+MV_CESA_COMMAND* cesaCmdRing;
+MV_CESA_RESULT cesaResult;
+
+int cesaTestFull = 0;
+
+MV_BOOL cesaIsReady = MV_FALSE;
+MV_U32 cesaCycles = 0;
+MV_U32 cesaBeginTicks = 0;
+MV_U32 cesaEndTicks = 0;
+MV_U32 cesaRate = 0;
+MV_U32 cesaRateAfterDot = 0;
+
+void *cesaTestOSHandle = NULL;
+
+enum
+{
+ CESA_FAST_CHECK_MODE = 0,
+ CESA_FULL_CHECK_MODE,
+ CESA_NULL_CHECK_MODE,
+ CESA_SHOW_CHECK_MODE,
+ CESA_SW_SHOW_CHECK_MODE,
+ CESA_SW_NULL_CHECK_MODE,
+
+ CESA_MAX_CHECK_MODE
+};
+
+enum
+{
+ DES_TEST_TYPE = 0,
+ TRIPLE_DES_TEST_TYPE = 1,
+ AES_TEST_TYPE = 2,
+ MD5_TEST_TYPE = 3,
+ SHA_TEST_TYPE = 4,
+ COMBINED_TEST_TYPE = 5,
+
+ MAX_TEST_TYPE
+};
+
+/* Tests data base */
+typedef struct
+{
+ short sid;
+ char cryptoAlgorithm; /* DES/3DES/AES */
+ char cryptoMode; /* ECB or CBC */
+ char macAlgorithm; /* MD5 / SHA1 */
+ char operation; /* CRYPTO/HMAC/CRYPTO+HMAC/HMAC+CRYPTO */
+ char direction; /* ENCODE(SIGN)/DECODE(VERIFY) */
+ unsigned char* pCryptoKey;
+ int cryptoKeySize;
+ unsigned char* pMacKey;
+ int macKeySize;
+ const char* name;
+
+} MV_CESA_TEST_SESSION;
+
+typedef struct
+{
+ MV_CESA_TEST_SESSION* pSessions;
+ int numSessions;
+
+} MV_CESA_TEST_DB_ENTRY;
+
+typedef struct
+{
+ char* plainHexStr;
+ char* cipherHexStr;
+ unsigned char* pCryptoIV;
+ int cryptoLength;
+ int macLength;
+ int digestOffset;
+
+} MV_CESA_TEST_CASE;
+
+typedef struct
+{
+ int size;
+ const char* outputHexStr;
+
+} MV_CESA_SIZE_TEST;
+
+static unsigned char cryptoKey1[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef,
+ 0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef,
+ 0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef};
+
+static unsigned char cryptoKey7[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef};
+static unsigned char iv1[] = {0x12, 0x34, 0x56, 0x78, 0x90, 0xab, 0xcd, 0xef};
+
+
+static unsigned char cryptoKey2[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F};
+
+static unsigned char cryptoKey3[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17};
+
+static unsigned char cryptoKey4[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f};
+
+static unsigned char cryptoKey5[] = {0x56, 0xe4, 0x7a, 0x38, 0xc5, 0x59, 0x89, 0x74,
+ 0xbc, 0x46, 0x90, 0x3d, 0xba, 0x29, 0x03, 0x49};
+
+
+static unsigned char key3des1[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF,
+ 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF, 0x01,
+ 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF, 0x01, 0x23};
+
+/* Input ASCII string: The quick brown fox jump */
+static char plain3des1[] = "54686520717566636B2062726F776E20666F78206A756D70";
+static char cipher3des1[] = "A826FD8CE53B855FCCE21C8112256FE668D5C05DD9B6B900";
+
+static unsigned char key3des2[] = {0x62, 0x7f, 0x46, 0x0e, 0x08, 0x10, 0x4a, 0x10,
+ 0x43, 0xcd, 0x26, 0x5d, 0x58, 0x40, 0xea, 0xf1,
+ 0x31, 0x3e, 0xdf, 0x97, 0xdf, 0x2a, 0x8a, 0x8c};
+
+static unsigned char iv3des2[] = {0x8e, 0x29, 0xf7, 0x5e, 0xa7, 0x7e, 0x54, 0x75};
+
+static char plain3des2[] = "326a494cd33fe756";
+
+static char cipher3desCbc2[] = "8e29f75ea77e5475"
+ "b22b8d66de970692";
+
+static unsigned char key3des3[] = {0x37, 0xae, 0x5e, 0xbf, 0x46, 0xdf, 0xf2, 0xdc,
+ 0x07, 0x54, 0xb9, 0x4f, 0x31, 0xcb, 0xb3, 0x85,
+ 0x5e, 0x7f, 0xd3, 0x6d, 0xc8, 0x70, 0xbf, 0xae};
+
+static unsigned char iv3des3[] = {0x3d, 0x1d, 0xe3, 0xcc, 0x13, 0x2e, 0x3b, 0x65};
+
+static char plain3des3[] = "84401f78fe6c10876d8ea23094ea5309";
+
+static char cipher3desCbc3[] = "3d1de3cc132e3b65"
+ "7b1f7c7e3b1c948ebd04a75ffba7d2f5";
+
+static unsigned char iv5[] = {0x8c, 0xe8, 0x2e, 0xef, 0xbe, 0xa0, 0xda, 0x3c,
+ 0x44, 0x69, 0x9e, 0xd7, 0xdb, 0x51, 0xb7, 0xd9};
+
+static unsigned char aesCtrKey[] = {0x76, 0x91, 0xBE, 0x03, 0x5E, 0x50, 0x20, 0xA8,
+ 0xAC, 0x6E, 0x61, 0x85, 0x29, 0xF9, 0xA0, 0xDC};
+
+static unsigned char mdKey1[] = {0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
+ 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b};
+
+static unsigned char mdKey2[] = {0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+ 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa};
+
+static unsigned char shaKey1[] = {0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
+ 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
+ 0x0b, 0x0b, 0x0b, 0x0b};
+
+static unsigned char shaKey2[] = {0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+ 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+ 0xaa, 0xaa, 0xaa, 0xaa};
+
+static unsigned char mdKey4[] = {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10};
+
+static unsigned char shaKey4[] = {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10,
+ 0x11, 0x12, 0x13, 0x14};
+
+
+static MV_CESA_TEST_SESSION desTestSessions[] =
+{
+/*000*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]),
+ NULL, 0,
+ "DES ECB encode",
+ },
+/*001*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_DECODE,
+ cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]),
+ NULL, 0,
+ "DES ECB decode",
+ },
+/*002*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]),
+ NULL, 0,
+ "DES CBC encode"
+ },
+/*003*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_DECODE,
+ cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]),
+ NULL, 0,
+ "DES CBC decode"
+ },
+/*004*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ NULL, 0, NULL, 0,
+ "NULL Crypto Algorithm encode"
+ },
+};
+
+
+static MV_CESA_TEST_SESSION tripleDesTestSessions[] =
+{
+/*100*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+ NULL, 0,
+ "3DES ECB encode",
+ },
+/*101*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_DECODE,
+ cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+ NULL, 0,
+ "3DES ECB decode",
+ },
+/*102*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+ NULL, 0,
+ "3DES CBC encode"
+ },
+/*103*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_DECODE,
+ cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+ NULL, 0,
+ "3DES CBC decode"
+ },
+/*104*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ key3des1, sizeof(key3des1),
+ NULL, 0,
+ "3DES ECB encode"
+ },
+/*105*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ key3des2, sizeof(key3des2),
+ NULL, 0,
+ "3DES ECB encode"
+ },
+/*106*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ key3des3, sizeof(key3des3),
+ NULL, 0,
+ "3DES ECB encode"
+ },
+};
+
+
+static MV_CESA_TEST_SESSION aesTestSessions[] =
+{
+/*200*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey2, sizeof(cryptoKey2)/sizeof(cryptoKey2[0]),
+ NULL, 0,
+ "AES-128 ECB encode"
+ },
+/*201*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_DECODE,
+ cryptoKey2, sizeof(cryptoKey2)/sizeof(cryptoKey2[0]),
+ NULL, 0,
+ "AES-128 ECB decode"
+ },
+/*202*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]),
+ NULL, 0,
+ "AES-128 CBC encode"
+ },
+/*203*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_DECODE,
+ cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]),
+ NULL, 0,
+ "AES-128 CBC decode"
+ },
+/*204*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey3, sizeof(cryptoKey3)/sizeof(cryptoKey3[0]),
+ NULL, 0,
+ "AES-192 ECB encode"
+ },
+/*205*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_DECODE,
+ cryptoKey3, sizeof(cryptoKey3)/sizeof(cryptoKey3[0]),
+ NULL, 0,
+ "AES-192 ECB decode"
+ },
+/*206*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey4, sizeof(cryptoKey4)/sizeof(cryptoKey4[0]),
+ NULL, 0,
+ "AES-256 ECB encode"
+ },
+/*207*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_DECODE,
+ cryptoKey4, sizeof(cryptoKey4)/sizeof(cryptoKey4[0]),
+ NULL, 0,
+ "AES-256 ECB decode"
+ },
+/*208*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CTR,
+ MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+ MV_CESA_DIR_ENCODE,
+ aesCtrKey, sizeof(aesCtrKey)/sizeof(aesCtrKey[0]),
+ NULL, 0,
+ "AES-128 CTR encode"
+ },
+};
+
+
+static MV_CESA_TEST_SESSION md5TestSessions[] =
+{
+/*300*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_ENCODE,
+ NULL, 0,
+ mdKey1, sizeof(mdKey1),
+ "HMAC-MD5 Generate Signature"
+ },
+/*301*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_DECODE,
+ NULL, 0,
+ mdKey1, sizeof(mdKey1),
+ "HMAC-MD5 Verify Signature"
+ },
+/*302*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_ENCODE,
+ NULL, 0,
+ mdKey2, sizeof(mdKey2),
+ "HMAC-MD5 Generate Signature"
+ },
+/*303*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_DECODE,
+ NULL, 0,
+ mdKey2, sizeof(mdKey2),
+ "HMAC-MD5 Verify Signature"
+ },
+/*304*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_ENCODE,
+ NULL, 0,
+ mdKey4, sizeof(mdKey4),
+ "HMAC-MD5 Generate Signature"
+ },
+/*305*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_MD5, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_ENCODE,
+ NULL, 0,
+ NULL, 0,
+ "HASH-MD5 Generate Signature"
+ },
+};
+
+
+static MV_CESA_TEST_SESSION shaTestSessions[] =
+{
+/*400*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_ENCODE,
+ NULL, 0,
+ shaKey1, sizeof(shaKey1),
+ "HMAC-SHA1 Generate Signature"
+ },
+/*401*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_DECODE,
+ NULL, 0,
+ shaKey1, sizeof(shaKey1),
+ "HMAC-SHA1 Verify Signature"
+ },
+/*402*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_ENCODE,
+ NULL, 0,
+ shaKey2, sizeof(shaKey2),
+ "HMAC-SHA1 Generate Signature"
+ },
+/*403*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_DECODE,
+ NULL, 0,
+ shaKey2, sizeof(shaKey2),
+ "HMAC-SHA1 Verify Signature"
+ },
+/*404*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_ENCODE,
+ NULL, 0,
+ shaKey4, sizeof(shaKey4),
+ "HMAC-SHA1 Generate Signature"
+ },
+/*405*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_SHA1, MV_CESA_MAC_ONLY,
+ MV_CESA_DIR_ENCODE,
+ NULL, 0,
+ NULL, 0,
+ "HASH-SHA1 Generate Signature"
+ },
+};
+
+static MV_CESA_TEST_SESSION combinedTestSessions[] =
+{
+/*500*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey1, MV_CESA_DES_KEY_LENGTH,
+ mdKey4, sizeof(mdKey4),
+ "DES + MD5 encode"
+ },
+/*501*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey1, MV_CESA_DES_KEY_LENGTH,
+ shaKey4, sizeof(shaKey4),
+ "DES + SHA1 encode"
+ },
+/*502*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+ mdKey4, sizeof(mdKey4),
+ "3DES + MD5 encode"
+ },
+/*503*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+ shaKey4, sizeof(shaKey4),
+ "3DES + SHA1 encode"
+ },
+/*504*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+ mdKey4, sizeof(mdKey4),
+ "3DES CBC + MD5 encode"
+ },
+/*505*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+ shaKey4, sizeof(shaKey4),
+ "3DES CBC + SHA1 encode"
+ },
+/*506*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]),
+ mdKey4, sizeof(mdKey4),
+ "AES-128 CBC + MD5 encode"
+ },
+/*507*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC,
+ MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC,
+ MV_CESA_DIR_ENCODE,
+ cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]),
+ shaKey4, sizeof(shaKey4),
+ "AES-128 CBC + SHA1 encode"
+ },
+/*508*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+ MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_THEN_CRYPTO,
+ MV_CESA_DIR_DECODE,
+ cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+ mdKey4, sizeof(mdKey4),
+ "HMAC-MD5 + 3DES decode"
+ },
+};
+
+
+static MV_CESA_TEST_DB_ENTRY cesaTestsDB[MAX_TEST_TYPE+1] =
+{
+ { desTestSessions, sizeof(desTestSessions)/sizeof(desTestSessions[0]) },
+ { tripleDesTestSessions, sizeof(tripleDesTestSessions)/sizeof(tripleDesTestSessions[0]) },
+ { aesTestSessions, sizeof(aesTestSessions)/sizeof(aesTestSessions[0]) },
+ { md5TestSessions, sizeof(md5TestSessions)/sizeof(md5TestSessions[0]) },
+ { shaTestSessions, sizeof(shaTestSessions)/sizeof(shaTestSessions[0]) },
+ { combinedTestSessions, sizeof(combinedTestSessions)/sizeof(combinedTestSessions[0]) },
+ { NULL, 0 }
+};
+
+
+char cesaNullPlainHexText[] = "000000000000000000000000000000000000000000000000";
+
+char cesaPlainAsciiText[] = "Now is the time for all ";
+char cesaPlainHexEbc[] = "4e6f77206973207468652074696d6520666f7220616c6c20";
+char cesaCipherHexEcb[] = "3fa40e8a984d48156a271787ab8883f9893d51ec4b563b53";
+char cesaPlainHexCbc[] = "1234567890abcdef4e6f77206973207468652074696d6520666f7220616c6c20";
+char cesaCipherHexCbc[] = "1234567890abcdefe5c7cdde872bf27c43e934008c389c0f683788499a7c05f6";
+
+char cesaAesPlainHexEcb[] = "000102030405060708090a0b0c0d0e0f";
+char cesaAes128cipherHexEcb[] = "0a940bb5416ef045f1c39458c653ea5a";
+char cesaAes192cipherHexEcb[] = "0060bffe46834bb8da5cf9a61ff220ae";
+char cesaAes256cipherHexEcb[] = "5a6e045708fb7196f02e553d02c3a692";
+
+char cesaAsciiStr1[] = "Hi There";
+char cesaDataHexStr1[] = "4869205468657265";
+char cesaHmacMd5digestHex1[] = "9294727a3638bb1c13f48ef8158bfc9d";
+char cesaHmacSha1digestHex1[] = "b617318655057264e28bc0b6fb378c8ef146be00";
+char cesaDataAndMd5digest1[] = "48692054686572659294727a3638bb1c13f48ef8158bfc9d";
+char cesaDataAndSha1digest1[] = "4869205468657265b617318655057264e28bc0b6fb378c8ef146be00";
+
+char cesaAesPlainText[] = "a0a1a2a3a4a5a6a7a8a9aaabacadaeaf"
+ "b0b1b2b3b4b5b6b7b8b9babbbcbdbebf"
+ "c0c1c2c3c4c5c6c7c8c9cacbcccdcecf"
+ "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf";
+
+char cesaAes128CipherCbc[] = "c30e32ffedc0774e6aff6af0869f71aa"
+ "0f3af07a9a31a9c684db207eb0ef8e4e"
+ "35907aa632c3ffdf868bb7b29d3d46ad"
+ "83ce9f9a102ee99d49a53e87f4c3da55";
+
+char cesaAesIvPlainText[] = "8ce82eefbea0da3c44699ed7db51b7d9"
+ "a0a1a2a3a4a5a6a7a8a9aaabacadaeaf"
+ "b0b1b2b3b4b5b6b7b8b9babbbcbdbebf"
+ "c0c1c2c3c4c5c6c7c8c9cacbcccdcecf"
+ "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf";
+
+char cesaAes128IvCipherCbc[] = "8ce82eefbea0da3c44699ed7db51b7d9"
+ "c30e32ffedc0774e6aff6af0869f71aa"
+ "0f3af07a9a31a9c684db207eb0ef8e4e"
+ "35907aa632c3ffdf868bb7b29d3d46ad"
+ "83ce9f9a102ee99d49a53e87f4c3da55";
+
+char cesaAesCtrPlain[] = "00E0017B27777F3F4A1786F000000001"
+ "000102030405060708090A0B0C0D0E0F"
+ "101112131415161718191A1B1C1D1E1F"
+ "20212223";
+
+char cesaAesCtrCipher[] = "00E0017B27777F3F4A1786F000000001"
+ "C1CF48A89F2FFDD9CF4652E9EFDB72D7"
+ "4540A42BDE6D7836D59A5CEAAEF31053"
+ "25B2072F";
+
+
+
+/* Input cesaHmacHex3 is '0xdd' repeated 50 times */
+char cesaHmacMd5digestHex3[] = "56be34521d144c88dbb8c733f0e8b3f6";
+char cesaHmacSha1digestHex3[] = "125d7342b9ac11cd91a39af48aa17b4f63f175d3";
+char cesaDataHexStr3[50*2+1] = "";
+char cesaDataAndMd5digest3[sizeof(cesaDataHexStr3)+sizeof(cesaHmacMd5digestHex3)+8*2+1] = "";
+char cesaDataAndSha1digest3[sizeof(cesaDataHexStr3)+sizeof(cesaHmacSha1digestHex3)+8*2+1] = "";
+
+/* Ascii string is "abc" */
+char hashHexStr3[] = "616263";
+char hashMd5digest3[] = "900150983cd24fb0d6963f7d28e17f72";
+char hashSha1digest3[] = "a9993e364706816aba3e25717850c26c9cd0d89d";
+
+char hashHexStr80[] = "31323334353637383930"
+ "31323334353637383930"
+ "31323334353637383930"
+ "31323334353637383930"
+ "31323334353637383930"
+ "31323334353637383930"
+ "31323334353637383930"
+ "31323334353637383930";
+
+char hashMd5digest80[] = "57edf4a22be3c955ac49da2e2107b67a";
+
+char tripleDesThenMd5digest80[] = "b7726a03aad490bd6c5a452a89a1b271";
+char tripleDesThenSha1digest80[] = "b2ddeaca91030eab5b95a234ef2c0f6e738ff883";
+
+char cbc3desThenMd5digest80[] = "6f463057e1a90e0e91ae505b527bcec0";
+char cbc3desThenSha1digest80[] = "1b002ed050be743aa98860cf35659646bb8efcc0";
+
+char cbcAes128ThenMd5digest80[] = "6b6e863ac5a71d15e3e9b1c86c9ba05f";
+char cbcAes128ThenSha1digest80[] = "13558472d1fc1c90dffec6e5136c7203452d509b";
+
+
+static MV_CESA_TEST_CASE cesaTestCases[] =
+{
+ /* plainHexStr cipherHexStr IV crypto mac digest */
+ /* Length Length Offset */
+ /*0*/ { NULL, NULL, NULL, 0, 0, -1 },
+ /*1*/ { cesaPlainHexEbc, cesaCipherHexEcb, NULL, 24, 0, -1 },
+ /*2*/ { cesaPlainHexCbc, cesaCipherHexCbc, NULL, 24, 0, -1 },
+ /*3*/ { cesaAesPlainHexEcb, cesaAes128cipherHexEcb, NULL, 16, 0, -1 },
+ /*4*/ { cesaAesPlainHexEcb, cesaAes192cipherHexEcb, NULL, 16, 0, -1 },
+ /*5*/ { cesaAesPlainHexEcb, cesaAes256cipherHexEcb, NULL, 16, 0, -1 },
+ /*6*/ { cesaDataHexStr1, cesaHmacMd5digestHex1, NULL, 0, 8, -1 },
+ /*7*/ { NULL, cesaDataAndMd5digest1, NULL, 0, 8, -1 },
+ /*8*/ { cesaDataHexStr3, cesaHmacMd5digestHex3, NULL, 0, 50, -1 },
+ /*9*/ { NULL, cesaDataAndMd5digest3, NULL, 0, 50, -1 },
+/*10*/ { cesaAesPlainText, cesaAes128IvCipherCbc, iv5, 64, 0, -1 },
+/*11*/ { cesaDataHexStr1, cesaHmacSha1digestHex1, NULL, 0, 8, -1 },
+/*12*/ { NULL, cesaDataAndSha1digest1, NULL, 0, 8, -1 },
+/*13*/ { cesaDataHexStr3, cesaHmacSha1digestHex3, NULL, 0, 50, -1 },
+/*14*/ { NULL, cesaDataAndSha1digest3, NULL, 0, 50, -1 },
+/*15*/ { hashHexStr3, hashMd5digest3, NULL, 0, 3, -1 },
+/*16*/ { hashHexStr3, hashSha1digest3, NULL, 0, 3, -1 },
+/*17*/ { hashHexStr80, tripleDesThenMd5digest80, NULL, 80, 80, -1 },
+/*18*/ { hashHexStr80, tripleDesThenSha1digest80, NULL, 80, 80, -1 },
+/*19*/ { hashHexStr80, cbc3desThenMd5digest80, iv1, 80, 80, -1 },
+/*20*/ { hashHexStr80, cbc3desThenSha1digest80, iv1, 80, 80, -1 },
+/*21*/ { hashHexStr80, cbcAes128ThenMd5digest80, iv5, 80, 80, -1 },
+/*22*/ { hashHexStr80, cbcAes128ThenSha1digest80, iv5, 80, 80, -1 },
+/*23*/ { cesaAesCtrPlain, cesaAesCtrCipher, NULL, 36, 0, -1 },
+/*24*/ { cesaAesIvPlainText, cesaAes128IvCipherCbc, NULL, 64, 0, -1 },
+/*25*/ { plain3des1, cipher3des1, NULL, 0, 0, -1 },
+/*26*/ { plain3des2, cipher3desCbc2, iv3des2,0, 0, -1 },
+/*27*/ { plain3des3, cipher3desCbc3, iv3des3,0, 0, -1 },
+};
+
+
+/* Key = 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+ * 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa
+ * Input 0xdd repeated "size" times
+ */
+static MV_CESA_SIZE_TEST mdMultiSizeTest302[] =
+{
+ { 80, "7a031a640c14a4872814930b1ef3a5b2" },
+ { 512, "5488e6c5a14dc72a79f28312ca5b939b" },
+ { 1000, "d00814f586a8b78a05724239d2531821" },
+ { 1001, "bf07df7b7f49d3f5b5ecacd4e9e63281" },
+ { 1002, "1ed4a1a802e87817a819d4e37bb4d0f7" },
+ { 1003, "5972ab64a4f265ee371dac2f2f137f90" },
+ { 1004, "71f95e7ec3aa7df2548e90898abdb28e" },
+ { 1005, "e082790b4857fcfc266e92e59e608814" },
+ { 1006, "9500f02fd8ac7fde8b10e4fece9a920d" },
+ { 1336, "e42edcce57d0b75b01aa09d71427948b" },
+ { 1344, "bb5454ada0deb49ba0a97ffd60f57071" },
+ { 1399, "0f44d793e744b24d53f44f295082ee8c" },
+ { 1400, "359de8a03a9b707928c6c60e0e8d79f1" },
+ { 1401, "e913858b484cbe2b384099ea88d8855b" },
+ { 1402, "d9848a164af53620e0540c1d7d87629e" },
+ { 1403, "0c9ee1c2c9ef45e9b625c26cbaf3e822" },
+ { 1404, "12edd4f609416e3c936170360561b064" },
+ { 1405, "7fc912718a05446395345009132bf562" },
+ { 1406, "882f17425e579ff0d85a91a59f308aa0" },
+ { 1407, "005cae408630a2fb5db82ad9db7e59da" },
+ { 1408, "64655f8b404b3fea7a3e3e609bc5088f" },
+ { 1409, "4a145284a7f74e01b6bb1a0ec6a0dd80" },
+ { 2048, "67caf64475650732def374ebb8bde3fd" },
+ { 2049, "6c84f11f472825f7e6cd125c2981884b" },
+ { 2050, "8999586754a73a99efbe4dbad2816d41" },
+ { 2051, "ba6946b610e098d286bc81091659dfff" },
+ { 2052, "d0afa01c92d4d13def2b024f36faed83" },
+ { 3072, "61d8beac61806afa2585d74a9a0e6974" },
+ { 3074, "f6501a28dcc24d1e4770505c51a87ed3" },
+ { 3075, "ea4a6929be67e33e61ff475369248b73" },
+ { 4048, "aa8c4d68f282a07e7385acdfa69f4bed" },
+ { 4052, "afb5ed2c0e1d430ea59e59ed5ed6b18a" },
+ { 4058, "9e8553f9bdd43aebe0bd729f0e600c99" },
+ { 6144, "f628f3e5d183fe5cdd3a5abee39cf872" },
+ { 6150, "89a3efcea9a2f25f919168ad4a1fd292" },
+ { 6400, "cdd176b7fb747873efa4da5e32bdf88f" },
+ { 6528, "b1d707b027354aca152c45ee559ccd3f" },
+ { 8192, "c600ea4429ac47f9941f09182166e51a" },
+ {16384, "16e8754bfbeb4c649218422792267a37" },
+ {18432, "0fd0607521b0aa8b52219cfbe215f63e" },
+ { 0, NULL },
+};
+
+/* Key = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ */
+static MV_CESA_SIZE_TEST mdMultiSizeTest304[] =
+{
+ { 80, "a456c4723fee6068530af5a2afa71627" },
+ { 512, "f85c2a2344f5de68b432208ad13e5794" },
+ { 1000, "35464d6821fd4a293a41eb84e274c8c5" },
+ { 1001, "c08eedbdce60cceb54bc2d732bb32c8b" },
+ { 1002, "5664f71800c011cc311cb6943339c1b8" },
+ { 1003, "779c723b044c585dc7802b13e8501bdc" },
+ { 1004, "55e500766a2c307bc5c5fdd15e4cacd4" },
+ { 1005, "d5f978954f5c38529d1679d2b714f068" },
+ { 1006, "cd3efc827ce628b7281b72172693abf9" },
+ { 1336, "6f04479910785878ae6335b8d1e87edf" },
+ { 1344, "b6d27b50c2bce1ba2a8e1b5cc4324368" },
+ { 1399, "65f70a1d4c86e5eaeb0704c8a7816795" },
+ { 1400, "3394b5adc4cb3ff98843ca260a44a88a" },
+ { 1401, "3a06f3582033a66a4e57e0603ce94e74" },
+ { 1402, "e4d97f5ed51edc48abfa46eeb5c31752" },
+ { 1403, "3d05e40b080ee3bedf293cb87b7140e7" },
+ { 1404, "8cf294fc3cd153ab18dccb2a52cbf244" },
+ { 1405, "d1487bd42f6edd9b4dab316631159221" },
+ { 1406, "0527123b6bf6936cf5d369dc18c6c70f" },
+ { 1407, "3224a06639db70212a0cd1ae1fcc570a" },
+ { 1408, "a9e13335612c0356f5e2c27086e86c43" },
+ { 1409, "a86d1f37d1ed8a3552e9a4f04dceea98" },
+ { 2048, "396905c9b961cd0f6152abfb69c4449c" },
+ { 2049, "49f39bff85d9dcf059fadb89efc4a70f" },
+ { 2050, "3a2b4823bc4d0415656550226a63e34a" },
+ { 2051, "dec60580d406c782540f398ad0bcc7e0" },
+ { 2052, "32f76610a14310309eb748fe025081bf" },
+ { 3072, "45edc1a42bf9d708a621076b63b774da" },
+ { 3074, "9be1b333fe7c0c9f835fb369dc45f778" },
+ { 3075, "8c06fcac7bd0e7b7a17fd6508c09a549" },
+ { 4048, "0ddaef848184bf0ad98507a10f1e90e4" },
+ { 4052, "81976bcaeb274223983996c137875cb8" },
+ { 4058, "0b0a7a1c82bc7cbc64d8b7cd2dc2bb22" },
+ { 6144, "1c24056f52725ede2dff0d7f9fc9855f" },
+ { 6150, "b7f4b65681c4e43ee68ca466ca9ca4ec" },
+ { 6400, "443bbaab9f7331ddd4bf11b659cd43c8" },
+ { 6528, "216f44f23047cfee03a7a64f88f9a995" },
+ { 8192, "ac7a993b2cad54879dba1bde63e39097" },
+ { 8320, "55ed7be9682d6c0025b3221a62088d08" },
+ {16384, "c6c722087653b62007aea668277175e5" },
+ {18432, "f1faca8e907872c809e14ffbd85792d6" },
+ { 0, NULL },
+};
+
+/* HASH-MD5
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * repeated "size" times
+ */
+static MV_CESA_SIZE_TEST mdMultiSizeTest305[] =
+{
+ { 80, "57edf4a22be3c955ac49da2e2107b67a" },
+ { 512, "c729ae8f0736cc377a9767a660eaa04e" },
+ { 1000, "f1257a8659eb92d36fe14c6bf3852a6a" },
+ { 1001, "f8a46fe8ea04fdc8c7de0e84042d3878" },
+ { 1002, "da188dd67bff87d58aa3c02af2d0cc0f" },
+ { 1003, "961753017feee04c9b93a8e51658a829" },
+ { 1004, "dd68c4338608dcc87807a711636bf2af" },
+ { 1005, "e338d567d3ce66bf69ada29658a8759b" },
+ { 1006, "443c9811e8b92599b0b149e8d7ec700a" },
+ { 1336, "89a98511706008ba4cbd0b4a24fa5646" },
+ { 1344, "335a919805f370b9e402a62c6fe01739" },
+ { 1399, "5d18d0eddcd84212fe28d812b5e80e3b" },
+ { 1400, "6b695c240d2dffd0dffc99459ca76db6" },
+ { 1401, "49590f61298a76719bc93a57a30136f5" },
+ { 1402, "94c2999fa3ef1910a683d69b2b8476f2" },
+ { 1403, "37073a02ab00ecba2645c57c228860db" },
+ { 1404, "1bcd06994fce28b624f0c5fdc2dcdd2b" },
+ { 1405, "11b93671a64c95079e8cf9e7cddc8b3d" },
+ { 1406, "4b6695772a4c66313fa4871017d05f36" },
+ { 1407, "d1539b97fbfda1c075624e958de19c5b" },
+ { 1408, "b801b9b69920907cd018e8063092ede9" },
+ { 1409, "b765f1406cfe78e238273ed01bbcaf7e" },
+ { 2048, "1d7e2c64ac29e2b3fb4c272844ed31f5" },
+ { 2049, "71d38fac49c6b1f4478d8d88447bcdd0" },
+ { 2050, "141c34a5592b1bebfa731e0b23d0cdba" },
+ { 2051, "c5e1853f21c59f5d6039bd13d4b380d8" },
+ { 2052, "dd44a0d128b63d4b5cccd967906472d7" },
+ { 3072, "37d158e33b21390822739d13db7b87fe" },
+ { 3074, "aef3b209d01d39d0597fe03634bbf441" },
+ { 3075, "335ffb428eabf210bada96d74d5a4012" },
+ { 4048, "2434c2b43d798d2819487a886261fc64" },
+ { 4052, "ac2fa84a8a33065b2e92e36432e861f8" },
+ { 4058, "856781f85616c341c3533d090c1e1e84" },
+ { 6144, "e5d134c652c18bf19833e115f7a82e9b" },
+ { 6150, "a09a353be7795fac2401dac5601872e6" },
+ { 6400, "08b9033ac6a1821398f50af75a2dbc83" },
+ { 6528, "3d47aa193a8540c091e7e02f779e6751" },
+ { 8192, "d3164e710c0626f6f395b38f20141cb7" },
+ { 8320, "b727589d9183ff4e8491dd24466974a3" },
+ {16384, "3f54d970793d2274d5b20d10a69938ac" },
+ {18432, "f558511dcf81985b7a1bb57fad970531" },
+ { 0, NULL },
+};
+
+
+/* Key = 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+ * 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa
+ * 0xaa, 0xaa, 0xaa, 0xaa
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ */
+static MV_CESA_SIZE_TEST shaMultiSizeTest402[] =
+{
+ { 80, "e812f370e659705a1649940d1f78cd7af18affd3" },
+ { 512, "e547f886b2c15d995ed76a8a924cb408c8080f66" },
+ { 1000, "239443194409f1a5342ecde1a092c8f3a3ed790a" },
+ { 1001, "f278ab9a102850a9f48dc4e9e6822afe2d0c52b5" },
+ { 1002, "8bcc667df5ab6ece988b3af361d09747c77f4e72" },
+ { 1003, "0fae6046c7dc1d3e356b25af836f6077a363f338" },
+ { 1004, "0ea48401cc92ae6bc92ae76685269cb0167fbe1a" },
+ { 1005, "ecbcd7c879b295bafcd8766cbeac58cc371e31d1" },
+ { 1006, "eb4a4a3d07d1e9a15e6f1ab8a9c47f243e27324c" },
+ { 1336, "f5950ee1d77c10e9011d2149699c9366fe52529c" },
+ { 1344, "b04263604a63c351b0b3b9cf1785b4bdba6c8838" },
+ { 1399, "8cb1cff61d5b784045974a2fc69386e3b8d24218" },
+ { 1400, "9bb2f3fcbeddb2b90f0be797cd647334a2816d51" },
+ { 1401, "23ae462a7a0cb440f7445791079a5d75a535dd33" },
+ { 1402, "832974b524a4d3f9cc2f45a3cabf5ccef65cd2aa" },
+ { 1403, "d1c683742fe404c3c20d5704a5430e7832a7ec95" },
+ { 1404, "867c79042e64f310628e219d8b85594cd0c7adc3" },
+ { 1405, "c9d81d49d13d94358f56ccfd61af02b36c69f7c3" },
+ { 1406, "0df43daab2786172f9b8d07d61f14a070cf1287a" },
+ { 1407, "0fd8f3ad7f169534b274d4c66bbddd89f759e391" },
+ { 1408, "3987511182b18473a564436003139b808fa46343" },
+ { 1409, "ef667e063c9e9f539a8987a8d0bd3066ee85d901" },
+ { 2048, "921109c99f3fedaca21727156d5f2b4460175327" },
+ { 2049, "47188600dd165eb45f27c27196d3c46f4f042c1b" },
+ { 2050, "8831939904009338de10e7fa670847041387807d" },
+ { 2051, "2f8ebb5db2997d614e767be1050366f3641e7520" },
+ { 2052, "669e51cd730dae158d3bef8adba075bd95a0d011" },
+ { 3072, "cfee66cfd83abc8451af3c96c6b35a41cc6c55f5" },
+ { 3074, "216ea26f02976a261b7d21a4dd3085157bedfabd" },
+ { 3075, "bd612ebba021fd8e012b14c3bd60c8c5161fabc0" },
+ { 4048, "c2564c1fdf2d5e9d7dde7aace2643428e90662e8" },
+ { 4052, "91ce61fe924b445dfe7b5a1dcd10a27caec16df6" },
+ { 4058, "db2a9be5ee8124f091c7ebd699266c5de223c164" },
+ { 6144, "855109903feae2ba3a7a05a326b8a171116eb368" },
+ { 6150, "37520bb3a668294d9c7b073e7e3daf8fee248a78" },
+ { 6400, "60a353c841b6d2b1a05890349dad2fa33c7536b7" },
+ { 6528, "9e53a43a69bb42d7c8522ca8bd632e421d5edb36" },
+ { 8192, "a918cb0da862eaea0a33ee0efea50243e6b4927c" },
+ { 8320, "29a5dcf55d1db29cd113fcf0572ae414f1c71329" },
+ {16384, "6fb27966138e0c8d5a0d65ace817ebd53633cee1" },
+ {18432, "ca09900d891c7c9ae2a559b10f63a217003341c1" },
+ { 0, NULL },
+};
+
+/* Key = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * 0x11, 0x12, 0x13, 0x14
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ */
+static MV_CESA_SIZE_TEST shaMultiSizeTest404[] =
+{
+ { 80, "beaf20a34b06a87558d156c0949bc3957d40222e" },
+ { 512, "3353955358d886bc2940a3c7f337ff7dafb59c7b" },
+ { 1000, "8737a542c5e9b2b6244b757ebb69d5bd602a829f" },
+ { 1001, "fd9e7582d8a5d3c9fe3b923e4e6a41b07a1eb4d4" },
+ { 1002, "a146d14a6fc3c274ff600568f4d75b977989e00d" },
+ { 1003, "be22601bbc027ddef2dec97d30b3dc424fd803c5" },
+ { 1004, "3e71fe99b2fe2b7bfdf4dbf0c7f3da25d7ea35e7" },
+ { 1005, "2c422735d7295408fddd76f5e8a83a2a8da13df3" },
+ { 1006, "6d875319049314b61855101a647b9ba3313428e6" },
+ { 1336, "c1631ea80bad9dc43a180712461b65a0598c711c" },
+ { 1344, "816069bf91d34581005746e2e0283d0f9c7b7605" },
+ { 1399, "4e139866dc61cfcb8b67ca2ebd637b3a538593af" },
+ { 1400, "ff2a0f8dd2b02c5417910f6f55d33a78e081a723" },
+ { 1401, "ab00c12be62336964cbce31ae97fe2a0002984d5" },
+ { 1402, "61349e7f999f3a1acc56c3e9a5060a9c4a7b05b6" },
+ { 1403, "3edbc0f61e435bc1317fa27d840076093fb79353" },
+ { 1404, "d052c6dfdbe63d45dab23ef9893e2aa4636aca1e" },
+ { 1405, "0cc16b7388d67bf0add15a31e6e6c753cfae4987" },
+ { 1406, "c96ba7eaad74253c38c22101b558d2850b1d1b90" },
+ { 1407, "3445428a40d2c6556e7c55797ad8d323b61a48d9" },
+ { 1408, "8d6444f937a09317c89834187b8ea9b8d3a8c56b" },
+ { 1409, "c700acd3ecd19014ea2bdb4d42510c467e088475" },
+ { 2048, "ee27d2a0cb77470c2f496212dfd68b5bb7b04e4b" },
+ { 2049, "683762d7a02983b26a6d046e6451d9cd82c25932" },
+ { 2050, "0fd20f1d55a9ee18363c2a6fd54aa13aee69992f" },
+ { 2051, "86c267d8cc4bc8d59090e4f8b303da960fd228b7" },
+ { 2052, "452395ae05b3ec503eea34f86fc0832485ad97c1" },
+ { 3072, "75198e3cfd0b9bcff2dabdf8e38e6fdaa33ca49a" },
+ { 3074, "4e24785ef080141ce4aab4675986d9acea624d7c" },
+ { 3075, "3a20c5978dd637ec0e809bf84f0d9ccf30bc65bf" },
+ { 4048, "3c32da256be7a7554922bf5fed51b0d2d09e59ad" },
+ { 4052, "fff898426ea16e54325ae391a32c6c9bce4c23c0" },
+ { 4058, "c800b9e562e1c91e1310116341a3c91d37f848ec" },
+ { 6144, "d91d509d0cc4376c2d05bf9a5097717a373530e6" },
+ { 6150, "d957030e0f13c5df07d9eec298542d8f94a07f12" },
+ { 6400, "bb745313c3d7dc17b3f955e5534ad500a1082613" },
+ { 6528, "77905f80d9ca82080bbb3e5654896dabfcfd1bdb" },
+ { 8192, "5237fd9a81830c974396f99f32047586612ff3c0" },
+ { 8320, "57668e28d5f2dba0839518a11db0f6af3d7e08bf" },
+ {16384, "62e093fde467f0748087beea32e9af97d5c61241" },
+ {18432, "845fb33130c7d6ea554fd5aacb9c50cf7ccb5929" },
+ { 0, NULL },
+};
+
+/* HASH-SHA1
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * repeated "size" times
+ */
+static MV_CESA_SIZE_TEST shaMultiSizeTest405[] =
+{
+ { 80, "50abf5706a150990a08b2c5ea40fa0e585554732" },
+ { 512, "f14516a08948fa27917a974d219741a697ba0087" },
+ { 1000, "0bd18c378d5788817eb4f1e5dc07d867efa5cbf4" },
+ { 1001, "ca29b85c35db1b8aef83c977893a11159d1b7aa2" },
+ { 1002, "d83bc973eaaedb8a31437994dabbb3304b0be086" },
+ { 1003, "2cf7bbef0acd6c00536b5c58ca470df9a3a90b6c" },
+ { 1004, "e4375d09b1223385a8a393066f8209acfd936a80" },
+ { 1005, "1029b38043e027745d019ce1d2d68e3d8b9d8f99" },
+ { 1006, "deea16dcebbd8ac137e2b984deb639b9fb5e9680" },
+ { 1336, "ea031b065fff63dcfb6a41956e4777520cdbc55d" },
+ { 1344, "b52096c6445e6c0a8355995c70dc36ae186c863c" },
+ { 1399, "cde2f6f8379870db4b32cf17471dc828a8dbff2b" },
+ { 1400, "e53ff664064bc09fe5054c650806bd42d8179518" },
+ { 1401, "d1156db5ddafcace64cdb510ff0d4af9b9a8ad64" },
+ { 1402, "34ede0e9a909dd84a2ae291539105c0507b958e1" },
+ { 1403, "a772ca3536da77e6ad3251e4f9e1234a4d7b87c0" },
+ { 1404, "29740fd2b04e7a8bfd32242db6233156ad699948" },
+ { 1405, "65b17397495b70ce4865dad93bf991b74c97cce1" },
+ { 1406, "a7ee89cd0754061fdb91af7ea6abad2c69d542e3" },
+ { 1407, "3eebf82f7420188e23d328b7ce93580b279a5715" },
+ { 1408, "e08d3363a8b9a490dfb3a4c453452b8f114deeec" },
+ { 1409, "95d74df739181a4ff30b8c39e28793a36598e924" },
+ { 2048, "aa40262509c2abf84aab0197f83187fc90056d91" },
+ { 2049, "7dec28ef105bc313bade8d9a7cdeac58b99de5ea" },
+ { 2050, "d2e30f77ec81197de20f56588a156094ecb88450" },
+ { 2051, "6b22ccc874833e96551a39da0c0edcaa0d969d92" },
+ { 2052, "f843141e57875cd669af58744bc60aa9ea59549c" },
+ { 3072, "09c5fedeaa62c132e673cc3c608a00142273d086" },
+ { 3074, "b09e95eea9c7b1b007a58accec488301901a7f3d" },
+ { 3075, "e6226b77b4ada287a8c9bbcf4ed71eec5ce632dc" },
+ { 4048, "e99394894f855821951ddddf5bfc628547435f5c" },
+ { 4052, "32d2f1af38be9cfba6cd03d55a254d0b3e1eb382" },
+ { 4058, "d906552a4f2aca3a22e1fecccbcd183d7289d0ef" },
+ { 6144, "2e7f62d35a860988e1224dc0543204af19316041" },
+ { 6150, "d6b89698ee133df46fec9d552fadc328aa5a1b51" },
+ { 6400, "dff50e90c46853988fa3a4b4ce5dda6945aae976" },
+ { 6528, "9e63ec0430b96db02d38bc78357a2f63de2ab7f8" },
+ { 8192, "971eb71ed60394d5ab5abb12e88420bdd41b5992" },
+ { 8320, "91606a31b46afeaac965cecf87297e791b211013" },
+ {16384, "547f830a5ec1f5f170ce818f156b1002cabc7569" },
+ {18432, "f16f272787f3b8d539652e4dc315af6ab4fda0ef" },
+ { 0, NULL },
+};
+
+/* CryptoKey = 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef;
+ * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to 3DES block size (8 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST tripleDesMdMultiSizeTest502[] =
+{
+ { 64, "9586962a2aaaef28803dec2e17807a7f" },
+ { 80, "b7726a03aad490bd6c5a452a89a1b271" },
+ { 352, "f1ed9563aecc3c0d2766eb2bed3b4e4c" },
+ { 512, "0f9decb11ab40fe86f4d4d9397bc020e" },
+ { 1000, "3ba69deac12cab8ff9dff7dbd9669927" },
+ { 1336, "6cf47bf1e80e03e2c1d0945bc50d37d2" },
+ { 1344, "4be388dab21ceb3fa1b8d302e9b821f7" },
+ { 1400, "a58b79fb21dd9bfc6ec93e3b99fb0ef1" },
+ { 1408, "8bc97379fc2ac3237effcdd4f7a86528" },
+ { 2048, "1339f03ab3076f25a20bc4cba16eb5bf" },
+ { 3072, "731204d2d90c4b36ae41f5e1fb874288" },
+ { 4048, "c028d998cfda5642547b7e1ed5ea16e4" },
+ { 6144, "b1b19cd910cc51bd22992f1e59f1e068" },
+ { 6400, "44e4613496ba622deb0e7cb768135a2f" },
+ { 6528, "3b06b0a86f8db9cd67f9448dfcf10549" },
+ { 8192, "d581780b7163138a0f412be681457d82" },
+ {16384, "03b8ac05527faaf1bed03df149c65ccf" },
+ {18432, "677c8a86a41dab6c5d81b85b8fb10ff6" },
+ { 0, NULL },
+};
+
+
+/* CryptoKey = 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef;
+ * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * 0x11, 0x12, 0x13, 0x14
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to 3DES block size (8 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST tripleDesShaMultiSizeTest503[] =
+{
+ { 64, "44a1e9bcbfc1429630d9ea68b7a48b0427a684f2" },
+ { 80, "b2ddeaca91030eab5b95a234ef2c0f6e738ff883" },
+ { 352, "4b91864c7ff629bdff75d9726421f76705452aaf" },
+ { 512, "6dd37faceeb2aa98ba74f4242ed6734a4d546af5" },
+ { 1000, "463661c30300be512a9df40904f0757cde5f1141" },
+ { 1336, "b931f831d9034fe59c65176400b039fe9c1f44a5" },
+ { 1344, "af8866b1cd4a4887d6185bfe72470ffdfb3648e1" },
+ { 1400, "49c6caf07296d5e31d2504d088bc5b20c3ee7cdb" },
+ { 1408, "fcae8deedbc6ebf0763575dc7e9de075b448a0f4" },
+ { 2048, "edece5012146c1faa0dd10f50b183ba5d2af58ac" },
+ { 3072, "5b83625adb43a488b8d64fecf39bb766818547b7" },
+ { 4048, "d2c533678d26c970293af60f14c8279dc708bfc9" },
+ { 6144, "b8f67af4f991b08b725f969b049ebf813bfacc5c" },
+ { 6400, "d9a6c7f746ac7a60ef2edbed2841cf851c25cfb0" },
+ { 6528, "376792b8c8d18161d15579fb7829e6e3a27e9946" },
+ { 8192, "d890eabdca195b34ef8724b28360cffa92ae5655" },
+ {16384, "a167ee52639ec7bf19aee9c6e8f76667c14134b9" },
+ {18432, "e4396ab56f67296b220985a12078f4a0e365d2cc" },
+ { 0, NULL },
+};
+
+/* CryptoKey = 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef
+ * IV = 0x12345678, 0x90abcdef
+ * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to 3DES block size (8 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST cbc3desMdMultiSizeTest504[] =
+{
+ { 64, "8d10e00802460ede0058c139ba48bd2d" },
+ { 80, "6f463057e1a90e0e91ae505b527bcec0" },
+ { 352, "4938d48bdf86aece2c6851e7c6079788" },
+ { 512, "516705d59f3cf810ebf2a13a23a7d42e" },
+ { 1000, "a5a000ee5c830e67ddc6a2d2e5644b31" },
+ { 1336, "44af60087b74ed07950088efbe3b126a" },
+ { 1344, "1f5b39e0577920af731dabbfcf6dfc2a" },
+ { 1400, "6804ea640e29b9cd39e08bc37dbce734" },
+ { 1408, "4fb436624b02516fc9d1535466574bf9" },
+ { 2048, "c909b0985c423d8d86719f701e9e83db" },
+ { 3072, "cfe0bc34ef97213ee3d3f8b10122db21" },
+ { 4048, "03ea10b5ae4ddeb20aed6af373082ed1" },
+ { 6144, "b9a0ff4f87fc14b3c2dc6f0ed0998fdf" },
+ { 6400, "6995f85d9d4985dd99e974ec7dda9dd6" },
+ { 6528, "bbbb548ce2fa3d58467f6a6a5168a0e6" },
+ { 8192, "afe101fbe745bb449ae4f50d10801456" },
+ {16384, "9741706d0b1c923340c4660ff97cacdf" },
+ {18432, "b0217becb73cb8f61fd79c7ce9d023fb" },
+ { 0, NULL },
+};
+
+
+/* CryptoKey = 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef;
+ * IV = 0x12345678, 0x90abcdef
+ * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * 0x11, 0x12, 0x13, 0x14
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to 3DES block size (8 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST cbc3desShaMultiSizeTest505[] =
+{
+ { 64, "409187e5bdb0be4a7754ca3747f7433dc4f01b98" },
+ { 80, "1b002ed050be743aa98860cf35659646bb8efcc0" },
+ { 352, "6cbf7ebe50fa4fa6eecc19eca23f9eae553ccfff" },
+ { 512, "cfb5253fb4bf72b743320c30c7e48c54965853b0" },
+ { 1000, "95e04e1ca2937e7c5a9aba9e42d2bcdb8a7af21f" },
+ { 1336, "3b5c1f5eee5837ebf67b83ae01405542d77a6627" },
+ { 1344, "2b3d42ab25615437f98a1ee310b81d07a02badc2" },
+ { 1400, "7f8687df7c1af44e4baf3c934b6cca5ab6bc993e" },
+ { 1408, "473a581c5f04f7527d50793c845471ac87e86430" },
+ { 2048, "e41d20cae7ebe34e6e828ed62b1e5734019037bb" },
+ { 3072, "275664afd7a561d804e6b0d204e53939cde653ae" },
+ { 4048, "0d220cc5b34aeeb46bbbd637dde6290b5a8285a3" },
+ { 6144, "cb393ddcc8b1c206060625b7d822ef9839e67bc5" },
+ { 6400, "dd3317e2a627fc04800f74a4b05bfda00fab0347" },
+ { 6528, "8a74c3b2441ab3f5a7e08895cc432566219a7c41" },
+ { 8192, "b8e6ef3a549ed0e005bd5b8b1a5fe6689e9711a7" },
+ {16384, "55f59404008276cdac0e2ba0d193af2d40eac5ce" },
+ {18432, "86ae6c4fc72369a54cce39938e2d0296cd9c6ec5" },
+ { 0, NULL },
+};
+
+
+/* CryptoKey = 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef
+ * IV = 0x12345678, 0x90abcdef
+ * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to AES block size (16 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST cbcAes128md5multiSizeTest506[] =
+{
+ { 16, "7ca4c2ba866751598720c5c4aa0d6786" },
+ { 64, "7dba7fb988e80da609b1fea7254bced8" },
+ { 80, "6b6e863ac5a71d15e3e9b1c86c9ba05f" },
+ { 352, "a1ceb9c2e3021002400d525187a9f38c" },
+ { 512, "596c055c1c55db748379223164075641" },
+ { 1008, "f920989c02f3b3603f53c99d89492377" },
+ { 1344, "2e496b73759d77ed32ea222dbd2e7b41" },
+ { 1408, "7178c046b3a8d772efdb6a71c4991ea4" },
+ { 2048, "a917f0099c69eb94079a8421714b6aad" },
+ { 3072, "693cd5033d7f5391d3c958519fa9e934" },
+ { 4048, "139dca91bcff65b3c40771749052906b" },
+ { 6144, "428d9cef6df4fb70a6e9b6bbe4819e55" },
+ { 6400, "9c0b909e76daa811e12b1fc17000a0c4" },
+ { 6528, "ad876f6297186a7be1f1b907ed860eda" },
+ { 8192, "479cbbaca37dd3191ea1f3e8134a0ef4" },
+ {16384, "60fda559c74f91df538100c9842f2f15" },
+ {18432, "4a3eb1cba1fa45f3981270953f720c42" },
+ { 0, NULL },
+};
+
+
+/* CryptoKey = 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef,
+ * 0x01234567, 0x89abcdef;
+ * IV = 0x12345678, 0x90abcdef
+ * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * 0x11, 0x12, 0x13, 0x14
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to AES block size (16 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST cbcAes128sha1multiSizeTest507[] =
+{
+ { 16, "9aa8dc1c45f0946daf78057fa978759c625c1fee" },
+ { 64, "9f588fc1ede851e5f8b20256abc9979465ae2189" },
+ { 80, "13558472d1fc1c90dffec6e5136c7203452d509b" },
+ { 352, "6b93518e006cfaa1f7adb24615e7291fb0a27e06" },
+ { 512, "096874951a77fbbf333e49d80c096ee2016e09bd" },
+ { 1008, "696fc203c2e4b5ae0ec5d1db3f623c490bc6dbac" },
+ { 1344, "79bf77509935ccd3528caaac6a5eb6481f74029b" },
+ { 1408, "627f9462b95fc188e8cfa7eec15119bdc5d4fcf1" },
+ { 2048, "3d50d0c005feba92fe41502d609fced9c882b4d1" },
+ { 3072, "758807e5b983e3a91c06fb218fe0f73f77111e94" },
+ { 4048, "ca90e85242e33f005da3504416a52098d0d31fb2" },
+ { 6144, "8044c1d4fd06642dfc46990b4f18b61ef1e972cf" },
+ { 6400, "166f1f4ea57409f04feba9fb1e39af0e00bd6f43" },
+ { 6528, "0389016a39485d6e330f8b4215ddf718b404f7e9" },
+ { 8192, "6df7ee2a8b61d6f7f860ce8dbf778f0c2a5b508b" },
+ {16384, "a70a6d8dfa1f91ded621c3dbaed34162bc48783f" },
+ {18432, "8dfad627922ce15df1eed10bdbed49244efa57db" },
+ { 0, NULL },
+};
+
+
+void cesaTestPrintStatus(void);
+
+
+/*------------------------- LOCAL FUNCTIONs ---------------------------------*/
+MV_STATUS testCmd(int sid, int iter, MV_CESA_COMMAND* pCmd,
+ MV_CESA_TEST_SESSION* pTestSession, MV_U8* pIV, int ivSize);
+MV_STATUS testClose(int idx);
+MV_STATUS testOpen(int idx);
+void close_session(int sid);
+void cesaTestCheckReady(const MV_CESA_RESULT *r);
+void cesaCheckReady(MV_CESA_RESULT* r);
+void printTestResults(int idx, MV_STATUS status, int checkMode);
+void cesaLastResult(void);
+void cesaTestPrintReq(int req, int offset, int size);
+
+void cesaTestPrintStatus(void);
+void cesaTestPrintSession(int idx);
+void sizeTest(int testIdx, int iter, int checkMode);
+void multiTest(int iter, int reqSize, int checkMode);
+void oneTest(int testIdx, int caseIdx,int iter, int reqSize, int checkMode);
+void multiSizeTest(int idx, int iter, int checkMode, char* inputData);
+void cesaTest(int iter, int reqSize, int checkMode);
+void cesaOneTest(int testIdx, int caseIdx,int iter, int reqSize, int checkMode);
+void combiTest(int iter, int reqSize, int checkMode);
+void shaTest(int iter, int reqSize, int checkMode);
+void mdTest(int iter, int reqSize, int checkMode);
+void aesTest(int iter, int reqSize, int checkMode);
+void tripleDesTest(int iter, int reqSize, int checkMode);
+void desTest(int iter, int reqSize, int checkMode);
+void cesaTestStop(void);
+MV_STATUS testRun(int idx, int caseIdx, int iter,int reqSize, int checkMode);
+void cesaTestStart(int bufNum, int bufSize);
+
+
+static MV_U32 getRate(MV_U32* remainder)
+{
+ MV_U32 kBits, milliSec, rate;
+
+ milliSec = 0;
+ if( (cesaEndTicks - cesaBeginTicks) > 0)
+ {
+ milliSec = CESA_TEST_TICK_TO_MS(cesaEndTicks - cesaBeginTicks);
+ }
+ if(milliSec == 0)
+ {
+ if(remainder != NULL)
+ *remainder = 0;
+ return 0;
+ }
+
+ kBits = (cesaIteration*cesaRateSize*8)/1000;
+ rate = kBits/milliSec;
+ if(remainder != NULL)
+ *remainder = ((kBits % milliSec)*10)/milliSec;
+
+ return rate;
+}
+
+static char* extractMbuf(MV_CESA_MBUF *pMbuf,
+ int offset, int size, char* hexStr)
+{
+ mvCesaCopyFromMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset, size);
+ mvBinToHex((const MV_U8*)cesaBinBuffer, hexStr, size);
+
+ return hexStr;
+}
+
+static MV_BOOL cesaCheckMbuf(MV_CESA_MBUF *pMbuf,
+ const char* hexString, int offset,
+ int checkSize)
+{
+ MV_BOOL isFailed = MV_FALSE;
+ MV_STATUS status;
+ int size = strlen(hexString)/2;
+ int checkedSize = 0;
+/*
+ mvOsPrintf("cesaCheckMbuf: pMbuf=%p, offset=%d, checkSize=%d, mBufSize=%d\n",
+ pMbuf, offset, checkSize, pMbuf->mbufSize);
+*/
+ if(pMbuf->mbufSize < (checkSize + offset))
+ {
+ mvOsPrintf("checkSize (%d) is too large: offset=%d, mbufSize=%d\n",
+ checkSize, offset, pMbuf->mbufSize);
+ return MV_TRUE;
+ }
+ status = mvCesaCopyFromMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset, checkSize);
+ if(status != MV_OK)
+ {
+ mvOsPrintf("CesaTest: Can't copy %d bytes from Mbuf=%p to checkBuf=%p\n",
+ checkSize, pMbuf, cesaBinBuffer);
+ return MV_TRUE;
+ }
+/*
+ mvDebugMemDump(cesaBinBuffer, size, 1);
+*/
+ mvHexToBin(hexString, (MV_U8*)cesaExpBinBuffer, size);
+
+ /* Compare buffers */
+ while(checkSize > checkedSize)
+ {
+ size = MV_MIN(size, (checkSize - checkedSize));
+ if(memcmp(cesaExpBinBuffer, &cesaBinBuffer[checkedSize], size) != 0)
+ {
+ mvOsPrintf("CheckMbuf failed: checkSize=%d, size=%d, checkedSize=%d\n",
+ checkSize, size, checkedSize);
+ mvDebugMemDump(&cesaBinBuffer[checkedSize], size, 1);
+ mvDebugMemDump(cesaExpBinBuffer, size, 1);
+
+ isFailed = MV_TRUE;
+ break;
+ }
+ checkedSize += size;
+ }
+
+ return isFailed;
+}
+
+static MV_STATUS cesaSetMbuf(MV_CESA_MBUF *pMbuf,
+ const char* hexString,
+ int offset, int reqSize)
+{
+ MV_STATUS status = MV_OK;
+ int copySize, size = strlen(hexString)/2;
+
+ mvHexToBin(hexString, (MV_U8*)cesaBinBuffer, size);
+
+ copySize = 0;
+ while(reqSize > copySize)
+ {
+ size = MV_MIN(size, (reqSize - copySize));
+
+ status = mvCesaCopyToMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset+copySize, size);
+ if(status != MV_OK)
+ {
+ mvOsPrintf("cesaSetMbuf Error: Copy %d of %d bytes to MBuf\n",
+ copySize, reqSize);
+ break;
+ }
+ copySize += size;
+ }
+ pMbuf->mbufSize = offset+copySize;
+ return status;
+}
+
+static MV_CESA_TEST_SESSION* getTestSessionDb(int idx, int* pTestIdx)
+{
+ int testIdx, dbIdx = idx/100;
+
+ if(dbIdx > MAX_TEST_TYPE)
+ {
+ mvOsPrintf("Wrong index %d - No such test type\n", idx);
+ return NULL;
+ }
+ testIdx = idx % 100;
+
+ if(testIdx >= cesaTestsDB[dbIdx].numSessions)
+ {
+ mvOsPrintf("Wrong index %d - No such test\n", idx);
+ return NULL;
+ }
+ if(pTestIdx != NULL)
+ *pTestIdx = testIdx;
+
+ return cesaTestsDB[dbIdx].pSessions;
+}
+
+/* Debug */
+void cesaTestPrintReq(int req, int offset, int size)
+{
+ MV_CESA_MBUF* pMbuf;
+
+ mvOsPrintf("cesaTestPrintReq: req=%d, offset=%d, size=%d\n",
+ req, offset, size);
+ mvDebugMemDump(cesaCmdRing, 128, 4);
+
+ pMbuf = cesaCmdRing[req].pSrc;
+ mvCesaDebugMbuf("src", pMbuf, offset,size);
+ pMbuf = cesaCmdRing[req].pDst;
+ mvCesaDebugMbuf("dst", pMbuf, offset, size);
+
+ cesaTestPrintStatus();
+}
+
+void cesaLastResult(void)
+{
+ mvOsPrintf("Last Result: ReqId = %d, SessionId = %d, rc = (%d)\n",
+ (MV_U32)cesaResult.pReqPrv, cesaResult.sessionId,
+ cesaResult.retCode);
+}
+
+void printTestResults(int idx, MV_STATUS status, int checkMode)
+{
+ int testIdx;
+ MV_CESA_TEST_SESSION* pTestSessions = getTestSessionDb(idx, &testIdx);
+
+ if(pTestSessions == NULL)
+ return;
+
+ mvOsPrintf("%-35s %4dx%-4d : ", pTestSessions[testIdx].name,
+ cesaIteration, cesaReqSize);
+ if( (status == MV_OK) &&
+ (cesaCryptoError == 0) &&
+ (cesaError == 0) &&
+ (cesaReqIdError == 0) )
+ {
+ mvOsPrintf("Passed, Rate=%3u.%u Mbps (%5u cpp)\n",
+ cesaRate, cesaRateAfterDot, cesaEndTicks - cesaBeginTicks);
+ }
+ else
+ {
+ mvOsPrintf("Failed, Status = 0x%x\n", status);
+ if(cesaCryptoError > 0)
+ mvOsPrintf("cryptoError : %d\n", cesaCryptoError);
+ if(cesaReqIdError > 0)
+ mvOsPrintf("reqIdError : %d\n", cesaReqIdError);
+ if(cesaError > 0)
+ mvOsPrintf("cesaError : %d\n", cesaError);
+ }
+ if(cesaTestIsrMissCount > 0)
+ mvOsPrintf("cesaIsrMissed : %d\n", cesaTestIsrMissCount);
+}
+
+void cesaCheckReady(MV_CESA_RESULT* r)
+{
+ int reqId;
+ MV_CESA_MBUF *pMbuf;
+ MV_BOOL isFailed;
+
+ cesaResult = *r;
+ reqId = (int)cesaResult.pReqPrv;
+ pMbuf = cesaCmdRing[reqId].pDst;
+
+/*
+ mvOsPrintf("cesaCheckReady: reqId=%d, checkOffset=%d, checkSize=%d\n",
+ reqId, cesaCheckOffset, cesaCheckSize);
+*/
+ /* Check expected reqId */
+ if(reqId != cesaExpReqId)
+ {
+ cesaReqIdError++;
+/*
+ mvOsPrintf("CESA reqId Error: cbIter=%d (%d), reqId=%d, expReqId=%d\n",
+ cesaCbIter, cesaIteration, reqId, cesaExpReqId);
+*/
+ }
+ else
+ {
+ if( (cesaCheckMode == CESA_FULL_CHECK_MODE) ||
+ (cesaCheckMode == CESA_FAST_CHECK_MODE) )
+ {
+ if(cesaResult.retCode != MV_OK)
+ {
+ cesaError++;
+
+ mvOsPrintf("CESA Error: cbIter=%d (%d), reqId=%d, rc=%d\n",
+ cesaCbIter, cesaIteration, reqId, cesaResult.retCode);
+ }
+ else
+ {
+ if( (cesaCheckSize > 0) && (cesaOutputHexStr != NULL) )
+ {
+ /* Check expected output */
+
+ isFailed = cesaCheckMbuf(pMbuf, cesaOutputHexStr, cesaCheckOffset, cesaCheckSize);
+ if(isFailed)
+ {
+ mvOsPrintf("CESA Crypto Error: cbIter=%d (%d), reqId=%d\n",
+ cesaCbIter, cesaIteration, reqId);
+
+ CESA_TEST_DEBUG_PRINT(("Error: reqId=%d, reqSize=%d, checkOffset=%d, checkSize=%d\n",
+ reqId, cesaReqSize, cesaCheckOffset, cesaCheckSize));
+
+ CESA_TEST_DEBUG_PRINT(("Output str: %s\n", cesaOutputHexStr));
+
+ CESA_TEST_DEBUG_CODE( mvCesaDebugMbuf("error", pMbuf, 0, cesaCheckOffset+cesaCheckSize) );
+
+ cesaCryptoError++;
+ }
+ }
+ }
+ }
+ }
+ if(cesaCheckMode == CESA_SHOW_CHECK_MODE)
+ {
+ extractMbuf(pMbuf, cesaCheckOffset, cesaCheckSize, cesaHexBuffer);
+ mvOsPrintf("%4d, %s\n", cesaCheckOffset, cesaHexBuffer);
+ }
+
+ cesaCbIter++;
+ if(cesaCbIter >= cesaIteration)
+ {
+ cesaCbIter = 0;
+ cesaExpReqId = 0;
+ cesaIsReady = MV_TRUE;
+
+ cesaEndTicks = CESA_TEST_TICK_GET();
+ cesaRate = getRate(&cesaRateAfterDot);
+ }
+ else
+ {
+ cesaExpReqId = reqId + 1;
+ if(cesaExpReqId == CESA_DEF_REQ_SIZE)
+ cesaExpReqId = 0;
+ }
+}
+
+
+#ifdef MV_NETBSD
+static int cesaTestReadyIsr(void *arg)
+#else
+#ifdef __KERNEL__
+static irqreturn_t cesaTestReadyIsr( int irq , void *dev_id)
+#endif
+#ifdef MV_VXWORKS
+void cesaTestReadyIsr(void)
+#endif
+#endif
+{
+ MV_U32 cause;
+ MV_STATUS status;
+ MV_CESA_RESULT result;
+
+ cesaTestIsrCount++;
+ /* Clear cause register */
+ cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG);
+ if( (cause & MV_CESA_CAUSE_ACC_DMA_ALL_MASK) == 0)
+ {
+ mvOsPrintf("cesaTestReadyIsr: cause=0x%x\n", cause);
+#ifdef MV_NETBSD
+ return 0;
+#else
+#ifdef __KERNEL__
+ return 1;
+#else
+ return;
+#endif
+#endif
+ }
+
+ MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0);
+
+ while(MV_TRUE)
+ {
+ /* Get Ready requests */
+ status = mvCesaReadyGet(&result);
+ if(status == MV_OK)
+ cesaCheckReady(&result);
+
+ break;
+ }
+ if( (cesaTestFull == 1) && (status != MV_BUSY) )
+ {
+ cesaTestFull = 0;
+ CESA_TEST_WAKE_UP();
+ }
+
+#ifdef __KERNEL__
+ return 1;
+#endif
+}
+
+void
+cesaTestCheckReady(const MV_CESA_RESULT *r)
+{
+ MV_CESA_RESULT result = *r;
+
+ cesaCheckReady(&result);
+
+ if (cesaTestFull == 1) {
+ cesaTestFull = 0;
+ CESA_TEST_WAKE_UP();
+ }
+}
+
+static INLINE int open_session(MV_CESA_OPEN_SESSION* pOs)
+{
+ MV_U16 sid;
+ MV_STATUS status;
+
+ status = mvCesaSessionOpen(pOs, (short*)&sid);
+ if(status != MV_OK)
+ {
+ mvOsPrintf("CesaTest: Can't open new session - status = 0x%x\n",
+ status);
+ return -1;
+ }
+
+ return (int)sid;
+}
+
+void close_session(int sid)
+{
+ MV_STATUS status;
+
+ status = mvCesaSessionClose(sid);
+ if(status != MV_OK)
+ {
+ mvOsPrintf("CesaTest: Can't close session %d - status = 0x%x\n",
+ sid, status);
+ }
+}
+
+MV_STATUS testOpen(int idx)
+{
+ MV_CESA_OPEN_SESSION os;
+ int sid, i, testIdx;
+ MV_CESA_TEST_SESSION* pTestSession;
+ MV_U16 digestSize = 0;
+
+ pTestSession = getTestSessionDb(idx, &testIdx);
+ if(pTestSession == NULL)
+ {
+ mvOsPrintf("Test %d is not exist\n", idx);
+ return MV_BAD_PARAM;
+ }
+ pTestSession = &pTestSession[testIdx];
+
+ if(pTestSession->sid != -1)
+ {
+ mvOsPrintf("Session for test %d already created: sid=%d\n",
+ idx, pTestSession->sid);
+ return MV_OK;
+ }
+
+ os.cryptoAlgorithm = pTestSession->cryptoAlgorithm;
+ os.macMode = pTestSession->macAlgorithm;
+ switch(os.macMode)
+ {
+ case MV_CESA_MAC_MD5:
+ case MV_CESA_MAC_HMAC_MD5:
+ digestSize = MV_CESA_MD5_DIGEST_SIZE;
+ break;
+
+ case MV_CESA_MAC_SHA1:
+ case MV_CESA_MAC_HMAC_SHA1:
+ digestSize = MV_CESA_SHA1_DIGEST_SIZE;
+ break;
+
+ case MV_CESA_MAC_NULL:
+ digestSize = 0;
+ }
+ os.cryptoMode = pTestSession->cryptoMode;
+ os.direction = pTestSession->direction;
+ os.operation = pTestSession->operation;
+
+ for(i=0; i<pTestSession->cryptoKeySize; i++)
+ os.cryptoKey[i] = pTestSession->pCryptoKey[i];
+
+ os.cryptoKeyLength = pTestSession->cryptoKeySize;
+
+ for(i=0; i<pTestSession->macKeySize; i++)
+ os.macKey[i] = pTestSession->pMacKey[i];
+
+ os.macKeyLength = pTestSession->macKeySize;
+ os.digestSize = digestSize;
+
+ sid = open_session(&os);
+ if(sid == -1)
+ {
+ mvOsPrintf("Can't open session for test %d: rc=0x%x\n",
+ idx, cesaResult.retCode);
+ return cesaResult.retCode;
+ }
+ CESA_TEST_DEBUG_PRINT(("Opened session: sid = %d\n", sid));
+ pTestSession->sid = sid;
+ return MV_OK;
+}
+
+MV_STATUS testClose(int idx)
+{
+ int testIdx;
+ MV_CESA_TEST_SESSION* pTestSession;
+
+ pTestSession = getTestSessionDb(idx, &testIdx);
+ if(pTestSession == NULL)
+ {
+ mvOsPrintf("Test %d is not exist\n", idx);
+ return MV_BAD_PARAM;
+ }
+ pTestSession = &pTestSession[testIdx];
+
+ if(pTestSession->sid == -1)
+ {
+ mvOsPrintf("Test session %d is not opened\n", idx);
+ return MV_NO_SUCH;
+ }
+
+ close_session(pTestSession->sid);
+ pTestSession->sid = -1;
+
+ return MV_OK;
+}
+
+MV_STATUS testCmd(int sid, int iter, MV_CESA_COMMAND* pCmd,
+ MV_CESA_TEST_SESSION* pTestSession, MV_U8* pIV, int ivSize)
+{
+ int cmdReqId = 0;
+ int i;
+ MV_STATUS rc = MV_OK;
+ char ivZeroHex[] = "0000";
+
+ if(iter == 0)
+ iter = CESA_DEF_ITER_NUM;
+
+ if(pCmd == NULL)
+ {
+ mvOsPrintf("testCmd failed: pCmd=NULL\n");
+ return MV_BAD_PARAM;
+ }
+ pCmd->sessionId = sid;
+
+ cesaCryptoError = 0;
+ cesaReqIdError = 0;
+ cesaError = 0;
+ cesaTestIsrMissCount = 0;
+ cesaIsReady = MV_FALSE;
+ cesaIteration = iter;
+
+ if(cesaInputHexStr == NULL)
+ cesaInputHexStr = cesaPlainHexEbc;
+
+ for(i=0; i<CESA_DEF_REQ_SIZE; i++)
+ {
+ pCmd->pSrc = (MV_CESA_MBUF*)(cesaCmdRing[i].pSrc);
+ if(pIV != NULL)
+ {
+ /* If IV from SA - set IV in Source buffer to zeros */
+ cesaSetMbuf(pCmd->pSrc, ivZeroHex, 0, pCmd->cryptoOffset);
+ cesaSetMbuf(pCmd->pSrc, cesaInputHexStr, pCmd->cryptoOffset,
+ (cesaReqSize - pCmd->cryptoOffset));
+ }
+ else
+ {
+ cesaSetMbuf(pCmd->pSrc, cesaInputHexStr, 0, cesaReqSize);
+ }
+ pCmd->pDst = (MV_CESA_MBUF*)(cesaCmdRing[i].pDst);
+ cesaSetMbuf(pCmd->pDst, cesaNullPlainHexText, 0, cesaReqSize);
+
+ memcpy(&cesaCmdRing[i], pCmd, sizeof(*pCmd));
+ }
+
+ if(cesaCheckMode == CESA_SW_SHOW_CHECK_MODE)
+ {
+ MV_U8 pDigest[MV_CESA_MAX_DIGEST_SIZE];
+
+ if(pTestSession->macAlgorithm == MV_CESA_MAC_MD5)
+ {
+ mvMD5(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, pDigest);
+ mvOsPrintf("SW HASH_MD5: reqSize=%d, macLength=%d\n",
+ cesaReqSize, pCmd->macLength);
+ mvDebugMemDump(pDigest, MV_CESA_MD5_DIGEST_SIZE, 1);
+ return MV_OK;
+ }
+ if(pTestSession->macAlgorithm == MV_CESA_MAC_SHA1)
+ {
+ mvSHA1(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, pDigest);
+ mvOsPrintf("SW HASH_SHA1: reqSize=%d, macLength=%d\n",
+ cesaReqSize, pCmd->macLength);
+ mvDebugMemDump(pDigest, MV_CESA_SHA1_DIGEST_SIZE, 1);
+ return MV_OK;
+ }
+ }
+
+ cesaBeginTicks = CESA_TEST_TICK_GET();
+ CESA_TEST_DEBUG_CODE( memset(cesaTestTrace, 0, sizeof(cesaTestTrace));
+ cesaTestTraceIdx = 0;
+ );
+
+ if(cesaCheckMode == CESA_SW_NULL_CHECK_MODE)
+ {
+ volatile MV_U8 pDigest[MV_CESA_MAX_DIGEST_SIZE];
+
+ for(i=0; i<iter; i++)
+ {
+ if(pTestSession->macAlgorithm == MV_CESA_MAC_MD5)
+ {
+ mvMD5(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, (unsigned char*)pDigest);
+ }
+ if(pTestSession->macAlgorithm == MV_CESA_MAC_SHA1)
+ {
+ mvSHA1(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, (MV_U8 *)pDigest);
+ }
+ }
+ cesaEndTicks = CESA_TEST_TICK_GET();
+ cesaRate = getRate(&cesaRateAfterDot);
+ cesaIsReady = MV_TRUE;
+
+ return MV_OK;
+ }
+
+ /*cesaTestIsrCount = 0;*/
+ /*mvCesaDebugStatsClear();*/
+
+#ifndef MV_NETBSD
+ MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0);
+#endif
+
+ for(i=0; i<iter; i++)
+ {
+ unsigned long flags;
+
+ pCmd = &cesaCmdRing[cmdReqId];
+ pCmd->pReqPrv = (void*)cmdReqId;
+
+ CESA_TEST_LOCK(flags);
+
+ rc = mvCesaAction(pCmd);
+ if(rc == MV_NO_RESOURCE)
+ cesaTestFull = 1;
+
+ CESA_TEST_UNLOCK(flags);
+
+ if(rc == MV_NO_RESOURCE)
+ {
+ CESA_TEST_LOCK(flags);
+ CESA_TEST_WAIT( (cesaTestFull == 0), 100);
+ CESA_TEST_UNLOCK(flags);
+ if(cesaTestFull == 1)
+ {
+ mvOsPrintf("CESA Test timeout: i=%d, iter=%d, cesaTestFull=%d\n",
+ i, iter, cesaTestFull);
+ cesaTestFull = 0;
+ return MV_TIMEOUT;
+ }
+
+ CESA_TEST_LOCK(flags);
+
+ rc = mvCesaAction(pCmd);
+
+ CESA_TEST_UNLOCK(flags);
+ }
+ if( (rc != MV_OK) && (rc != MV_NO_MORE) )
+ {
+ mvOsPrintf("mvCesaAction failed: rc=%d\n", rc);
+ return rc;
+ }
+
+ cmdReqId++;
+ if(cmdReqId >= CESA_DEF_REQ_SIZE)
+ cmdReqId = 0;
+
+#ifdef MV_LINUX
+ /* Reschedule each 16 requests */
+ if( (i & 0xF) == 0)
+ schedule();
+#endif
+ }
+ return MV_OK;
+}
+
+void cesaTestStart(int bufNum, int bufSize)
+{
+ int i, j, idx;
+ MV_CESA_MBUF *pMbufSrc, *pMbufDst;
+ MV_BUF_INFO *pFragsSrc, *pFragsDst;
+ char *pBuf;
+#ifndef MV_NETBSD
+ int numOfSessions, queueDepth;
+ char *pSram;
+ MV_STATUS status;
+ MV_CPU_DEC_WIN addrDecWin;
+#endif
+
+ cesaCmdRing = mvOsMalloc(sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE);
+ if(cesaCmdRing == NULL)
+ {
+ mvOsPrintf("testStart: Can't allocate %ld bytes of memory\n",
+ sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE);
+ return;
+ }
+ memset(cesaCmdRing, 0, sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE);
+
+ if(bufNum == 0)
+ bufNum = CESA_DEF_BUF_NUM;
+
+ if(bufSize == 0)
+ bufSize = CESA_DEF_BUF_SIZE;
+
+ cesaBufNum = bufNum;
+ cesaBufSize = bufSize;
+ mvOsPrintf("CESA test started: bufNum = %d, bufSize = %d\n",
+ bufNum, bufSize);
+
+ cesaHexBuffer = mvOsMalloc(2*bufNum*bufSize);
+ if(cesaHexBuffer == NULL)
+ {
+ mvOsPrintf("testStart: Can't malloc %d bytes for cesaHexBuffer.\n",
+ 2*bufNum*bufSize);
+ return;
+ }
+ memset(cesaHexBuffer, 0, (2*bufNum*bufSize));
+
+ cesaBinBuffer = mvOsMalloc(bufNum*bufSize);
+ if(cesaBinBuffer == NULL)
+ {
+ mvOsPrintf("testStart: Can't malloc %d bytes for cesaBinBuffer\n",
+ bufNum*bufSize);
+ return;
+ }
+ memset(cesaBinBuffer, 0, (bufNum*bufSize));
+
+ cesaExpBinBuffer = mvOsMalloc(bufNum*bufSize);
+ if(cesaExpBinBuffer == NULL)
+ {
+ mvOsPrintf("testStart: Can't malloc %d bytes for cesaExpBinBuffer\n",
+ bufNum*bufSize);
+ return;
+ }
+ memset(cesaExpBinBuffer, 0, (bufNum*bufSize));
+
+ CESA_TEST_WAIT_INIT();
+
+ pMbufSrc = mvOsMalloc(sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE);
+ pFragsSrc = mvOsMalloc(sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE);
+
+ pMbufDst = mvOsMalloc(sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE);
+ pFragsDst = mvOsMalloc(sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE);
+
+ if( (pMbufSrc == NULL) || (pFragsSrc == NULL) ||
+ (pMbufDst == NULL) || (pFragsDst == NULL) )
+ {
+ mvOsPrintf("testStart: Can't malloc Src and Dst pMbuf and pFrags structures.\n");
+ /* !!!! Dima cesaTestCleanup();*/
+ return;
+ }
+
+ memset(pMbufSrc, 0, sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE);
+ memset(pFragsSrc, 0, sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE);
+
+ memset(pMbufDst, 0, sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE);
+ memset(pFragsDst, 0, sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE);
+
+ mvOsPrintf("Cesa Test Start: pMbufSrc=%p, pFragsSrc=%p, pMbufDst=%p, pFragsDst=%p\n",
+ pMbufSrc, pFragsSrc, pMbufDst, pFragsDst);
+
+ idx = 0;
+ for(i=0; i<CESA_DEF_REQ_SIZE; i++)
+ {
+ pBuf = mvOsIoCachedMalloc(cesaTestOSHandle,bufSize * bufNum * 2,
+ &cesaReqBufs[i].bufPhysAddr,
+ &cesaReqBufs[i].memHandle);
+ if(pBuf == NULL)
+ {
+ mvOsPrintf("testStart: Can't malloc %d bytes for pBuf\n",
+ bufSize * bufNum * 2);
+ return;
+ }
+
+ memset(pBuf, 0, bufSize * bufNum * 2);
+ mvOsCacheFlush(cesaTestOSHandle,pBuf, bufSize * bufNum * 2);
+ if(pBuf == NULL)
+ {
+ mvOsPrintf("cesaTestStart: Can't allocate %d bytes for req_%d buffers\n",
+ bufSize * bufNum * 2, i);
+ return;
+ }
+
+ cesaReqBufs[i].bufVirtPtr = (MV_U8*)pBuf;
+ cesaReqBufs[i].bufSize = bufSize * bufNum * 2;
+
+ cesaCmdRing[i].pSrc = &pMbufSrc[i];
+ cesaCmdRing[i].pSrc->pFrags = &pFragsSrc[idx];
+ cesaCmdRing[i].pSrc->numFrags = bufNum;
+ cesaCmdRing[i].pSrc->mbufSize = 0;
+
+ cesaCmdRing[i].pDst = &pMbufDst[i];
+ cesaCmdRing[i].pDst->pFrags = &pFragsDst[idx];
+ cesaCmdRing[i].pDst->numFrags = bufNum;
+ cesaCmdRing[i].pDst->mbufSize = 0;
+
+ for(j=0; j<bufNum; j++)
+ {
+ cesaCmdRing[i].pSrc->pFrags[j].bufVirtPtr = (MV_U8*)pBuf;
+ cesaCmdRing[i].pSrc->pFrags[j].bufSize = bufSize;
+ pBuf += bufSize;
+ cesaCmdRing[i].pDst->pFrags[j].bufVirtPtr = (MV_U8*)pBuf;
+ cesaCmdRing[i].pDst->pFrags[j].bufSize = bufSize;
+ pBuf += bufSize;
+ }
+ idx += bufNum;
+ }
+
+#ifndef MV_NETBSD
+ if (mvCpuIfTargetWinGet(CRYPT_ENG, &addrDecWin) == MV_OK)
+ pSram = (char*)addrDecWin.addrWin.baseLow;
+ else
+ {
+ mvOsPrintf("mvCesaInit: ERR. mvCpuIfTargetWinGet failed\n");
+ return;
+ }
+
+#ifdef MV_CESA_NO_SRAM
+ pSram = mvOsMalloc(4*1024+8);
+ if(pSram == NULL)
+ {
+ mvOsPrintf("CesaTest: can't allocate %d bytes for SRAM simulation\n",
+ 4*1024+8);
+ /* !!!! Dima cesaTestCleanup();*/
+ return;
+ }
+ pSram = (MV_U8*)MV_ALIGN_UP((MV_U32)pSram, 8);
+#endif /* MV_CESA_NO_SRAM */
+
+ numOfSessions = CESA_DEF_SESSION_NUM;
+ queueDepth = CESA_DEF_REQ_SIZE - MV_CESA_MAX_CHAN;
+
+ status = mvCesaInit(numOfSessions, queueDepth, pSram, NULL);
+ if(status != MV_OK)
+ {
+ mvOsPrintf("mvCesaInit is Failed: status = 0x%x\n", status);
+ /* !!!! Dima cesaTestCleanup();*/
+ return;
+ }
+#endif /* !MV_NETBSD */
+
+ /* Prepare data for tests */
+ for(i=0; i<50; i++)
+ strcat((char*)cesaDataHexStr3, "dd");
+
+ strcpy((char*)cesaDataAndMd5digest3, cesaDataHexStr3);
+ strcpy((char*)cesaDataAndSha1digest3, cesaDataHexStr3);
+
+ /* Digest must be 8 byte aligned */
+ for(; i<56; i++)
+ {
+ strcat((char*)cesaDataAndMd5digest3, "00");
+ strcat((char*)cesaDataAndSha1digest3, "00");
+ }
+ strcat((char*)cesaDataAndMd5digest3, cesaHmacMd5digestHex3);
+ strcat((char*)cesaDataAndSha1digest3, cesaHmacSha1digestHex3);
+
+#ifndef MV_NETBSD
+ MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0);
+ MV_REG_WRITE( MV_CESA_ISR_MASK_REG, MV_CESA_CAUSE_ACC_DMA_MASK);
+#endif
+
+#ifdef MV_VXWORKS
+ {
+ MV_STATUS status;
+
+ status = intConnect((VOIDFUNCPTR *)INT_LVL_CESA, cesaTestReadyIsr, (int)NULL);
+ if (status != OK)
+ {
+ mvOsPrintf("CESA: Can't connect CESA (%d) interrupt, status=0x%x \n",
+ INT_LVL_CESA, status);
+ /* !!!! Dima cesaTestCleanup();*/
+ return;
+ }
+ cesaSemId = semMCreate(SEM_Q_PRIORITY | SEM_INVERSION_SAFE | SEM_DELETE_SAFE);
+ if(cesaSemId == NULL)
+ {
+ mvOsPrintf("cesaTestStart: Can't create semaphore\n");
+ return;
+ }
+ intEnable(INT_LVL_CESA);
+ }
+#endif /* MV_VXWORKS */
+
+#if !defined(MV_NETBSD) && defined(__KERNEL__)
+ if( request_irq(CESA_IRQ, cesaTestReadyIsr, (SA_INTERRUPT) , "cesa_test", NULL ) )
+ {
+ mvOsPrintf( "cannot assign irq\n" );
+ /* !!!! Dima cesaTestCleanup();*/
+ return;
+ }
+ spin_lock_init( &cesaLock );
+#endif
+}
+
+MV_STATUS testRun(int idx, int caseIdx, int iter,
+ int reqSize, int checkMode)
+{
+ int testIdx, count, sid, digestSize;
+ int blockSize;
+ MV_CESA_TEST_SESSION* pTestSession;
+ MV_CESA_COMMAND cmd;
+ MV_STATUS status;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ pTestSession = getTestSessionDb(idx, &testIdx);
+ if(pTestSession == NULL)
+ {
+ mvOsPrintf("Test %d is not exist\n", idx);
+ return MV_BAD_PARAM;
+ }
+ pTestSession = &pTestSession[testIdx];
+
+ sid = pTestSession->sid;
+ if(sid == -1)
+ {
+ mvOsPrintf("Test %d is not opened\n", idx);
+ return MV_BAD_STATE;
+ }
+ switch(pTestSession->cryptoAlgorithm)
+ {
+ case MV_CESA_CRYPTO_DES:
+ case MV_CESA_CRYPTO_3DES:
+ blockSize = MV_CESA_DES_BLOCK_SIZE;
+ break;
+
+ case MV_CESA_CRYPTO_AES:
+ blockSize = MV_CESA_AES_BLOCK_SIZE;
+ break;
+
+ case MV_CESA_CRYPTO_NULL:
+ blockSize = 0;
+ break;
+
+ default:
+ mvOsPrintf("cesaTestRun: Bad CryptoAlgorithm=%d\n",
+ pTestSession->cryptoAlgorithm);
+ return MV_BAD_PARAM;
+ }
+ switch(pTestSession->macAlgorithm)
+ {
+ case MV_CESA_MAC_MD5:
+ case MV_CESA_MAC_HMAC_MD5:
+ digestSize = MV_CESA_MD5_DIGEST_SIZE;
+ break;
+
+ case MV_CESA_MAC_SHA1:
+ case MV_CESA_MAC_HMAC_SHA1:
+ digestSize = MV_CESA_SHA1_DIGEST_SIZE;
+ break;
+ default:
+ digestSize = 0;
+ }
+
+ if(iter == 0)
+ iter = CESA_DEF_ITER_NUM;
+
+ if(pTestSession->direction == MV_CESA_DIR_ENCODE)
+ {
+ cesaOutputHexStr = cesaTestCases[caseIdx].cipherHexStr;
+ cesaInputHexStr = cesaTestCases[caseIdx].plainHexStr;
+ }
+ else
+ {
+ cesaOutputHexStr = cesaTestCases[caseIdx].plainHexStr;
+ cesaInputHexStr = cesaTestCases[caseIdx].cipherHexStr;
+ }
+
+ cmd.sessionId = sid;
+ if(checkMode == CESA_FAST_CHECK_MODE)
+ {
+ cmd.cryptoLength = cesaTestCases[caseIdx].cryptoLength;
+ cmd.macLength = cesaTestCases[caseIdx].macLength;
+ }
+ else
+ {
+ cmd.cryptoLength = reqSize;
+ cmd.macLength = reqSize;
+ }
+ cesaRateSize = cmd.cryptoLength;
+ cesaReqSize = cmd.cryptoLength;
+ cmd.cryptoOffset = 0;
+ if(pTestSession->operation != MV_CESA_MAC_ONLY)
+ {
+ if( (pTestSession->cryptoMode == MV_CESA_CRYPTO_CBC) ||
+ (pTestSession->cryptoMode == MV_CESA_CRYPTO_CTR) )
+ {
+ cmd.ivOffset = 0;
+ cmd.cryptoOffset = blockSize;
+ if(cesaTestCases[caseIdx].pCryptoIV == NULL)
+ {
+ cmd.ivFromUser = 1;
+ }
+ else
+ {
+ cmd.ivFromUser = 0;
+ mvCesaCryptoIvSet(cesaTestCases[caseIdx].pCryptoIV, blockSize);
+ }
+ cesaReqSize = cmd.cryptoOffset + cmd.cryptoLength;
+ }
+ }
+
+/*
+ mvOsPrintf("ivFromUser=%d, cryptoLength=%d, cesaReqSize=%d, cryptoOffset=%d\n",
+ cmd.ivFromUser, cmd.cryptoLength, cesaReqSize, cmd.cryptoOffset);
+*/
+ if(pTestSession->operation != MV_CESA_CRYPTO_ONLY)
+ {
+ cmd.macOffset = cmd.cryptoOffset;
+
+ if(cesaTestCases[caseIdx].digestOffset == -1)
+ {
+ cmd.digestOffset = cmd.macOffset + cmd.macLength;
+ cmd.digestOffset = MV_ALIGN_UP(cmd.digestOffset, 8);
+ }
+ else
+ {
+ cmd.digestOffset = cesaTestCases[caseIdx].digestOffset;
+ }
+ if( (cmd.digestOffset + digestSize) > cesaReqSize)
+ cesaReqSize = cmd.digestOffset + digestSize;
+ }
+
+ cesaCheckMode = checkMode;
+
+ if(checkMode == CESA_NULL_CHECK_MODE)
+ {
+ cesaCheckSize = 0;
+ cesaCheckOffset = 0;
+ }
+ else
+ {
+ if(pTestSession->operation == MV_CESA_CRYPTO_ONLY)
+ {
+ cesaCheckOffset = 0;
+ cesaCheckSize = cmd.cryptoLength;
+ }
+ else
+ {
+ cesaCheckSize = digestSize;
+ cesaCheckOffset = cmd.digestOffset;
+ }
+ }
+/*
+ mvOsPrintf("reqSize=%d, checkSize=%d, checkOffset=%d, checkMode=%d\n",
+ cesaReqSize, cesaCheckSize, cesaCheckOffset, cesaCheckMode);
+
+ mvOsPrintf("blockSize=%d, ivOffset=%d, ivFromUser=%d, crOffset=%d, crLength=%d\n",
+ blockSize, cmd.ivOffset, cmd.ivFromUser,
+ cmd.cryptoOffset, cmd.cryptoLength);
+
+ mvOsPrintf("macOffset=%d, digestOffset=%d, macLength=%d\n",
+ cmd.macOffset, cmd.digestOffset, cmd.macLength);
+*/
+ status = testCmd(sid, iter, &cmd, pTestSession,
+ cesaTestCases[caseIdx].pCryptoIV, blockSize);
+
+ if(status != MV_OK)
+ return status;
+
+ /* Wait when all callbacks is received */
+ count = 0;
+ while(cesaIsReady == MV_FALSE)
+ {
+ mvOsSleep(10);
+ count++;
+ if(count > 100)
+ {
+ mvOsPrintf("testRun: Timeout occured\n");
+ return MV_TIMEOUT;
+ }
+ }
+
+ return MV_OK;
+}
+
+
+void cesaTestStop(void)
+{
+ MV_CESA_MBUF *pMbufSrc, *pMbufDst;
+ MV_BUF_INFO *pFragsSrc, *pFragsDst;
+ int i;
+
+ /* Release all allocated memories */
+ pMbufSrc = (MV_CESA_MBUF*)(cesaCmdRing[0].pSrc);
+ pFragsSrc = cesaCmdRing[0].pSrc->pFrags;
+
+ pMbufDst = (MV_CESA_MBUF*)(cesaCmdRing[0].pDst);
+ pFragsDst = cesaCmdRing[0].pDst->pFrags;
+
+ mvOsFree(pMbufSrc);
+ mvOsFree(pMbufDst);
+ mvOsFree(pFragsSrc);
+ mvOsFree(pFragsDst);
+
+ for(i=0; i<CESA_DEF_REQ_SIZE; i++)
+ {
+ mvOsIoCachedFree(cesaTestOSHandle,cesaReqBufs[i].bufSize,
+ cesaReqBufs[i].bufPhysAddr,cesaReqBufs[i].bufVirtPtr,
+ cesaReqBufs[i].memHandle);
+ }
+ cesaDataHexStr3[0] = '\0';
+}
+
+void desTest(int iter, int reqSize, int checkMode)
+{
+ int mode, i;
+ MV_STATUS status;
+
+ mode = checkMode;
+ if(checkMode == CESA_FULL_CHECK_MODE)
+ mode = CESA_FAST_CHECK_MODE;
+ i = iter;
+ if(mode != CESA_NULL_CHECK_MODE)
+ i = 1;
+
+ testOpen(0);
+ testOpen(1);
+ testOpen(2);
+ testOpen(3);
+
+/* DES / ECB mode / Encrypt only */
+ status = testRun(0, 1, iter, reqSize, checkMode);
+ printTestResults(0, status, checkMode);
+
+/* DES / ECB mode / Decrypt only */
+ status = testRun(1, 1, iter, reqSize, checkMode);
+ printTestResults(1, status, checkMode);
+
+/* DES / CBC mode / Encrypt only */
+ status = testRun(2, 2, i, reqSize, mode);
+ printTestResults(2, status, mode);
+
+/* DES / CBC mode / Decrypt only */
+ status = testRun(3, 2, iter, reqSize, mode);
+ printTestResults(3, status, mode);
+
+ testClose(0);
+ testClose(1);
+ testClose(2);
+ testClose(3);
+}
+
+void tripleDesTest(int iter, int reqSize, int checkMode)
+{
+ int mode, i;
+ MV_STATUS status;
+
+ mode = checkMode;
+ if(checkMode == CESA_FULL_CHECK_MODE)
+ mode = CESA_FAST_CHECK_MODE;
+ i = iter;
+ if(mode != CESA_NULL_CHECK_MODE)
+ i = 1;
+
+ testOpen(100);
+ testOpen(101);
+ testOpen(102);
+ testOpen(103);
+
+/* 3DES / ECB mode / Encrypt only */
+ status = testRun(100, 1, iter, reqSize, checkMode);
+ printTestResults(100, status, checkMode);
+
+/* 3DES / ECB mode / Decrypt only */
+ status = testRun(101, 1, iter, reqSize, checkMode);
+ printTestResults(101, status, checkMode);
+
+/* 3DES / CBC mode / Encrypt only */
+ status = testRun(102, 2, i, reqSize, mode);
+ printTestResults(102, status, mode);
+
+/* 3DES / CBC mode / Decrypt only */
+ status = testRun(103, 2, iter, reqSize, mode);
+ printTestResults(103, status, mode);
+
+ testClose(100);
+ testClose(101);
+ testClose(102);
+ testClose(103);
+}
+
+void aesTest(int iter, int reqSize, int checkMode)
+{
+ MV_STATUS status;
+ int mode, i;
+
+ mode = checkMode;
+ if(checkMode == CESA_FULL_CHECK_MODE)
+ mode = CESA_FAST_CHECK_MODE;
+
+ i = iter;
+ if(mode != CESA_NULL_CHECK_MODE)
+ i = 1;
+
+ testOpen(200);
+ testOpen(201);
+ testOpen(202);
+ testOpen(203);
+ testOpen(204);
+ testOpen(205);
+ testOpen(206);
+ testOpen(207);
+ testOpen(208);
+
+/* AES-128 Encode ECB mode */
+ status = testRun(200, 3, iter, reqSize, checkMode);
+ printTestResults(200, status, checkMode);
+
+/* AES-128 Decode ECB mode */
+ status = testRun(201, 3, iter, reqSize, checkMode);
+ printTestResults(201, status, checkMode);
+
+/* AES-128 Encode CBC mode (IV from SA) */
+ status = testRun(202, 10, i, reqSize, mode);
+ printTestResults(202, status, mode);
+
+/* AES-128 Encode CBC mode (IV from User) */
+ status = testRun(202, 24, i, reqSize, mode);
+ printTestResults(202, status, mode);
+
+/* AES-128 Decode CBC mode */
+ status = testRun(203, 24, iter, reqSize, mode);
+ printTestResults(203, status, checkMode);
+
+/* AES-192 Encode ECB mode */
+ status = testRun(204, 4, iter, reqSize, checkMode);
+ printTestResults(204, status, checkMode);
+
+/* AES-192 Decode ECB mode */
+ status = testRun(205, 4, iter, reqSize, checkMode);
+ printTestResults(205, status, checkMode);
+
+/* AES-256 Encode ECB mode */
+ status = testRun(206, 5, iter, reqSize, checkMode);
+ printTestResults(206, status, checkMode);
+
+/* AES-256 Decode ECB mode */
+ status = testRun(207, 5, iter, reqSize, checkMode);
+ printTestResults(207, status, checkMode);
+
+#if defined(MV_LINUX)
+/* AES-128 Encode CTR mode */
+ status = testRun(208, 23, iter, reqSize, mode);
+ printTestResults(208, status, checkMode);
+#endif
+ testClose(200);
+ testClose(201);
+ testClose(202);
+ testClose(203);
+ testClose(204);
+ testClose(205);
+ testClose(206);
+ testClose(207);
+ testClose(208);
+}
+
+
+void mdTest(int iter, int reqSize, int checkMode)
+{
+ int mode;
+ MV_STATUS status;
+
+ if(iter == 0)
+ iter = CESA_DEF_ITER_NUM;
+
+ mode = checkMode;
+ if(checkMode == CESA_FULL_CHECK_MODE)
+ mode = CESA_FAST_CHECK_MODE;
+
+ testOpen(300);
+ testOpen(301);
+ testOpen(302);
+ testOpen(303);
+ testOpen(305);
+
+/* HMAC-MD5 Generate signature test */
+ status = testRun(300, 6, iter, reqSize, mode);
+ printTestResults(300, status, checkMode);
+
+/* HMAC-MD5 Verify Signature test */
+ status = testRun(301, 7, iter, reqSize, mode);
+ printTestResults(301, status, checkMode);
+
+/* HMAC-MD5 Generate signature test */
+ status = testRun(302, 8, iter, reqSize, mode);
+ printTestResults(302, status, checkMode);
+
+/* HMAC-MD5 Verify Signature test */
+ status = testRun(303, 9, iter, reqSize, mode);
+ printTestResults(303, status, checkMode);
+
+/* HASH-MD5 Generate signature test */
+ status = testRun(305, 15, iter, reqSize, mode);
+ printTestResults(305, status, checkMode);
+
+ testClose(300);
+ testClose(301);
+ testClose(302);
+ testClose(303);
+ testClose(305);
+}
+
+void shaTest(int iter, int reqSize, int checkMode)
+{
+ int mode;
+ MV_STATUS status;
+
+ if(iter == 0)
+ iter = CESA_DEF_ITER_NUM;
+
+ mode = checkMode;
+ if(checkMode == CESA_FULL_CHECK_MODE)
+ mode = CESA_FAST_CHECK_MODE;
+
+ testOpen(400);
+ testOpen(401);
+ testOpen(402);
+ testOpen(403);
+ testOpen(405);
+
+/* HMAC-SHA1 Generate signature test */
+ status = testRun(400, 11, iter, reqSize, mode);
+ printTestResults(400, status, checkMode);
+
+/* HMAC-SHA1 Verify Signature test */
+ status = testRun(401, 12, iter, reqSize, mode);
+ printTestResults(401, status, checkMode);
+
+/* HMAC-SHA1 Generate signature test */
+ status = testRun(402, 13, iter, reqSize, mode);
+ printTestResults(402, status, checkMode);
+
+/* HMAC-SHA1 Verify Signature test */
+ status = testRun(403, 14, iter, reqSize, mode);
+ printTestResults(403, status, checkMode);
+
+/* HMAC-SHA1 Generate signature test */
+ status = testRun(405, 16, iter, reqSize, mode);
+ printTestResults(405, status, checkMode);
+
+ testClose(400);
+ testClose(401);
+ testClose(402);
+ testClose(403);
+ testClose(405);
+}
+
+void combiTest(int iter, int reqSize, int checkMode)
+{
+ MV_STATUS status;
+ int mode, i;
+
+ mode = checkMode;
+ if(checkMode == CESA_FULL_CHECK_MODE)
+ mode = CESA_FAST_CHECK_MODE;
+
+ if(iter == 0)
+ iter = CESA_DEF_ITER_NUM;
+
+ i = iter;
+ if(mode != CESA_NULL_CHECK_MODE)
+ i = 1;
+
+ testOpen(500);
+ testOpen(501);
+ testOpen(502);
+ testOpen(503);
+ testOpen(504);
+ testOpen(505);
+ testOpen(506);
+ testOpen(507);
+
+/* DES ECB + MD5 encode test */
+ status = testRun(500, 17, iter, reqSize, mode);
+ printTestResults(500, status, mode);
+
+/* DES ECB + SHA1 encode test */
+ status = testRun(501, 18, iter, reqSize, mode);
+ printTestResults(501, status, mode);
+
+/* 3DES ECB + MD5 encode test */
+ status = testRun(502, 17, iter, reqSize, mode);
+ printTestResults(502, status, mode);
+
+/* 3DES ECB + SHA1 encode test */
+ status = testRun(503, 18, iter, reqSize, mode);
+ printTestResults(503, status, mode);
+
+/* 3DES CBC + MD5 encode test */
+ status = testRun(504, 19, i, reqSize, mode);
+ printTestResults(504, status, mode);
+
+/* 3DES CBC + SHA1 encode test */
+ status = testRun(505, 20, i, reqSize, mode);
+ printTestResults(505, status, mode);
+
+/* AES-128 CBC + MD5 encode test */
+ status = testRun(506, 21, i, reqSize, mode);
+ printTestResults(506, status, mode);
+
+/* AES-128 CBC + SHA1 encode test */
+ status = testRun(507, 22, i, reqSize, mode);
+ printTestResults(507, status, mode);
+
+ testClose(500);
+ testClose(501);
+ testClose(502);
+ testClose(503);
+ testClose(504);
+ testClose(505);
+ testClose(506);
+ testClose(507);
+}
+
+void cesaOneTest(int testIdx, int caseIdx,
+ int iter, int reqSize, int checkMode)
+{
+ MV_STATUS status;
+
+ if(iter == 0)
+ iter = CESA_DEF_ITER_NUM;
+
+ mvOsPrintf("test=%d, case=%d, size=%d, iter=%d\n",
+ testIdx, caseIdx, reqSize, iter);
+
+ status = testOpen(testIdx);
+
+ status = testRun(testIdx, caseIdx, iter, reqSize, checkMode);
+ printTestResults(testIdx, status, checkMode);
+ status = testClose(testIdx);
+
+}
+
+void cesaTest(int iter, int reqSize, int checkMode)
+{
+ if(iter == 0)
+ iter = CESA_DEF_ITER_NUM;
+
+ mvOsPrintf("%d iteration\n", iter);
+ mvOsPrintf("%d size\n\n", reqSize);
+
+/* DES tests */
+ desTest(iter, reqSize, checkMode);
+
+/* 3DES tests */
+ tripleDesTest(iter, reqSize, checkMode);
+
+/* AES tests */
+ aesTest(iter, reqSize, checkMode);
+
+/* MD5 tests */
+ mdTest(iter, reqSize, checkMode);
+
+/* SHA-1 tests */
+ shaTest(iter, reqSize, checkMode);
+}
+
+void multiSizeTest(int idx, int iter, int checkMode, char* inputData)
+{
+ MV_STATUS status;
+ int i;
+ MV_CESA_SIZE_TEST* pMultiTest;
+
+ if( testOpen(idx) != MV_OK)
+ return;
+
+ if(iter == 0)
+ iter = CESA_DEF_ITER_NUM;
+
+ if(checkMode == CESA_SHOW_CHECK_MODE)
+ {
+ iter = 1;
+ }
+ else
+ checkMode = CESA_FULL_CHECK_MODE;
+
+ cesaTestCases[0].plainHexStr = inputData;
+ cesaTestCases[0].pCryptoIV = NULL;
+
+ switch(idx)
+ {
+ case 302:
+ pMultiTest = mdMultiSizeTest302;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = cesaDataHexStr3;
+ break;
+
+ case 304:
+ pMultiTest = mdMultiSizeTest304;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ case 305:
+ pMultiTest = mdMultiSizeTest305;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ case 402:
+ pMultiTest = shaMultiSizeTest402;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ case 404:
+ pMultiTest = shaMultiSizeTest404;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ case 405:
+ pMultiTest = shaMultiSizeTest405;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ case 502:
+ pMultiTest = tripleDesMdMultiSizeTest502;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ case 503:
+ pMultiTest = tripleDesShaMultiSizeTest503;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ case 504:
+ iter = 1;
+ pMultiTest = cbc3desMdMultiSizeTest504;
+ cesaTestCases[0].pCryptoIV = iv1;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ case 505:
+ iter = 1;
+ pMultiTest = cbc3desShaMultiSizeTest505;
+ cesaTestCases[0].pCryptoIV = iv1;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ case 506:
+ iter = 1;
+ pMultiTest = cbcAes128md5multiSizeTest506;
+ cesaTestCases[0].pCryptoIV = iv5;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ case 507:
+ iter = 1;
+ pMultiTest = cbcAes128sha1multiSizeTest507;
+ cesaTestCases[0].pCryptoIV = iv5;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ break;
+
+ default:
+ iter = 1;
+ checkMode = CESA_SHOW_CHECK_MODE;
+ pMultiTest = mdMultiSizeTest302;
+ if(inputData == NULL)
+ cesaTestCases[0].plainHexStr = hashHexStr80;
+ }
+ i = 0;
+ while(pMultiTest[i].outputHexStr != NULL)
+ {
+ cesaTestCases[0].cipherHexStr = (char *)pMultiTest[i].outputHexStr;
+ status = testRun(idx, 0, iter, pMultiTest[i].size,
+ checkMode);
+ if(checkMode != CESA_SHOW_CHECK_MODE)
+ {
+ cesaReqSize = pMultiTest[i].size;
+ printTestResults(idx, status, checkMode);
+ }
+ if(status != MV_OK)
+ break;
+ i++;
+ }
+ testClose(idx);
+/*
+ mvCesaDebugStatus();
+ cesaTestPrintStatus();
+*/
+}
+
+void open_session_test(int idx, int caseIdx, int iter)
+{
+ int reqIdError, cryptoError, openErrors, i;
+ int openErrDisp[100];
+ MV_STATUS status;
+
+ memset(openErrDisp, 0, sizeof(openErrDisp));
+ openErrors = 0;
+ reqIdError = 0;
+ cryptoError = 0;
+ for(i=0; i<iter; i++)
+ {
+ status = testOpen(idx);
+ if(status != MV_OK)
+ {
+ openErrors++;
+ openErrDisp[status]++;
+ }
+ else
+ {
+ testRun(idx, caseIdx, 1, 0, CESA_FAST_CHECK_MODE);
+ if(cesaCryptoError > 0)
+ cryptoError++;
+ if(cesaReqIdError > 0)
+ reqIdError++;
+
+ testClose(idx);
+ }
+ }
+ if(cryptoError > 0)
+ mvOsPrintf("cryptoError : %d\n", cryptoError);
+ if(reqIdError > 0)
+ mvOsPrintf("reqIdError : %d\n", reqIdError);
+
+ if(openErrors > 0)
+ {
+ mvOsPrintf("Open Errors = %d\n", openErrors);
+ for(i=0; i<100; i++)
+ {
+ if(openErrDisp[i] != 0)
+ mvOsPrintf("Error %d - occurs %d times\n", i, openErrDisp[i]);
+ }
+ }
+}
+
+
+void loopback_test(int idx, int iter, int size, char* pPlainData)
+{
+}
+
+
+#if defined(MV_VXWORKS)
+int testMode = 0;
+unsigned __TASKCONV cesaTask(void* args)
+{
+ int reqSize = cesaReqSize;
+
+ if(testMode == 0)
+ {
+ cesaOneTest(cesaTestIdx, cesaCaseIdx, cesaIteration,
+ reqSize, cesaCheckMode);
+ }
+ else
+ {
+ if(testMode == 1)
+ {
+ cesaTest(cesaIteration, reqSize, cesaCheckMode);
+ combiTest(cesaIteration, reqSize, cesaCheckMode);
+ }
+ else
+ {
+ multiSizeTest(cesaIdx, cesaIteration, cesaCheckMode, NULL);
+ }
+ }
+ return 0;
+}
+
+void oneTest(int testIdx, int caseIdx,
+ int iter, int reqSize, int checkMode)
+{
+ long rc;
+
+ cesaIteration = iter;
+ cesaReqSize = cesaRateSize = reqSize;
+ cesaCheckMode = checkMode;
+ testMode = 0;
+ cesaTestIdx = testIdx;
+ cesaCaseIdx = caseIdx;
+ rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId);
+ if (rc != MV_OK)
+ {
+ mvOsPrintf("hMW: Can't create CESA multiCmd test task, rc = %ld\n", rc);
+ }
+}
+
+void multiTest(int iter, int reqSize, int checkMode)
+{
+ long rc;
+
+ cesaIteration = iter;
+ cesaCheckMode = checkMode;
+ cesaReqSize = reqSize;
+ testMode = 1;
+ rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId);
+ if (rc != MV_OK)
+ {
+ mvOsPrintf("hMW: Can't create CESA multiCmd test task, rc = %ld\n", rc);
+ }
+}
+
+void sizeTest(int testIdx, int iter, int checkMode)
+{
+ long rc;
+
+ cesaIteration = iter;
+ cesaCheckMode = checkMode;
+ testMode = 2;
+ cesaIdx = testIdx;
+ rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId);
+ if (rc != MV_OK)
+ {
+ mvOsPrintf("hMW: Can't create CESA test task, rc = %ld\n", rc);
+ }
+}
+
+#endif /* MV_VXWORKS */
+
+extern void mvCesaDebugSA(short sid, int mode);
+void cesaTestPrintSession(int idx)
+{
+ int testIdx;
+ MV_CESA_TEST_SESSION* pTestSession;
+
+ pTestSession = getTestSessionDb(idx, &testIdx);
+ if(pTestSession == NULL)
+ {
+ mvOsPrintf("Test %d is not exist\n", idx);
+ return;
+ }
+ pTestSession = &pTestSession[testIdx];
+
+ if(pTestSession->sid == -1)
+ {
+ mvOsPrintf("Test session %d is not opened\n", idx);
+ return;
+ }
+
+ mvCesaDebugSA(pTestSession->sid, 1);
+}
+
+void cesaTestPrintStatus(void)
+{
+ mvOsPrintf("\n\t Cesa Test Status\n\n");
+
+ mvOsPrintf("isrCount=%d\n",
+ cesaTestIsrCount);
+
+#ifdef CESA_TEST_DEBUG
+ {
+ int i, j;
+ j = cesaTestTraceIdx;
+ mvOsPrintf("No Type Cause rCause iCause Res Time pReady pProc pEmpty\n");
+ for(i=0; i<MV_CESA_TEST_TRACE_SIZE; i++)
+ {
+ mvOsPrintf("%02d. %d 0x%04x 0x%04x 0x%04x 0x%02x 0x%02x %02d 0x%06x %p %p %p\n",
+ j, cesaTestTrace[j].type, cesaTestTrace[j].cause, cesaTestTrace[j].realCause,
+ cesaTestTrace[j].dmaCause, cesaTestTrace[j].resources, cesaTestTrace[j].timeStamp,
+ cesaTestTrace[j].pReqReady, cesaTestTrace[j].pReqProcess, cesaTestTrace[j].pReqEmpty);
+ j++;
+ if(j == MV_CESA_TEST_TRACE_SIZE)
+ j = 0;
+ }
+ }
+#endif /* CESA_TEST_DEBUG */
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mvLru.h"
+/* LRU Cache support */
+
+
+/* Init LRU cache database */
+MV_LRU_CACHE* mvLruCacheInit(int numOfEntries)
+{
+ int i;
+ MV_LRU_CACHE* pLruCache;
+
+ pLruCache = mvOsMalloc(sizeof(MV_LRU_CACHE));
+ if(pLruCache == NULL)
+ {
+ return NULL;
+ }
+ memset(pLruCache, 0, sizeof(MV_LRU_CACHE));
+
+ pLruCache->table = mvOsMalloc(numOfEntries*sizeof(MV_LRU_ENTRY));
+ if(pLruCache->table == NULL)
+ {
+ mvOsFree(pLruCache);
+ return NULL;
+ }
+ memset(pLruCache->table, 0, numOfEntries*sizeof(MV_LRU_ENTRY));
+ pLruCache->tableSize = numOfEntries;
+
+ for(i=0; i<numOfEntries; i++)
+ {
+ pLruCache->table[i].next = i+1;
+ pLruCache->table[i].prev = i-1;
+ }
+ pLruCache->least = 0;
+ pLruCache->most = numOfEntries-1;
+
+ return pLruCache;
+}
+
+void mvLruCacheFinish(MV_LRU_CACHE* pLruCache)
+{
+ mvOsFree(pLruCache->table);
+ mvOsFree(pLruCache);
+}
+
+/* Update LRU cache database after using cache Index */
+void mvLruCacheIdxUpdate(MV_LRU_CACHE* pLruHndl, int cacheIdx)
+{
+ int prev, next;
+
+ if(cacheIdx == pLruHndl->most)
+ return;
+
+ next = pLruHndl->table[cacheIdx].next;
+ if(cacheIdx == pLruHndl->least)
+ {
+ pLruHndl->least = next;
+ }
+ else
+ {
+ prev = pLruHndl->table[cacheIdx].prev;
+
+ pLruHndl->table[next].prev = prev;
+ pLruHndl->table[prev].next = next;
+ }
+
+ pLruHndl->table[pLruHndl->most].next = cacheIdx;
+ pLruHndl->table[cacheIdx].prev = pLruHndl->most;
+ pLruHndl->most = cacheIdx;
+}
+
+/* Delete LRU cache entry */
+void mvLruCacheIdxDelete(MV_LRU_CACHE* pLruHndl, int cacheIdx)
+{
+ int prev, next;
+
+ if(cacheIdx == pLruHndl->least)
+ return;
+
+ prev = pLruHndl->table[cacheIdx].prev;
+ if(cacheIdx == pLruHndl->most)
+ {
+ pLruHndl->most = prev;
+ }
+ else
+ {
+ next = pLruHndl->table[cacheIdx].next;
+
+ pLruHndl->table[next].prev = prev;
+ pLruHndl->table[prev].next = next;
+ }
+ pLruHndl->table[pLruHndl->least].prev = cacheIdx;
+ pLruHndl->table[cacheIdx].next = pLruHndl->least;
+ pLruHndl->least = cacheIdx;
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/*******************************************************************************
+* mvLru.h - Header File for Least Recently Used Cache algorithm
+*
+* DESCRIPTION:
+* This header file contains macros typedefs and function declaration for
+* the Least Recently Used Cache algorithm.
+*
+*******************************************************************************/
+
+#ifndef __mvLru_h__
+#define __mvLru_h__
+
+
+typedef struct
+{
+ int next;
+ int prev;
+} MV_LRU_ENTRY;
+
+typedef struct
+{
+ int least;
+ int most;
+ MV_LRU_ENTRY* table;
+ int tableSize;
+
+}MV_LRU_CACHE;
+
+
+/* Find Cache index for replacement LRU */
+static INLINE int mvLruCacheIdxFind(MV_LRU_CACHE* pLruHndl)
+{
+ return pLruHndl->least;
+}
+
+/* Init LRU cache module */
+MV_LRU_CACHE* mvLruCacheInit(int numOfEntries);
+
+/* Finish LRU cache module */
+void mvLruCacheFinish(MV_LRU_CACHE* pLruHndl);
+
+/* Update LRU cache database after using cache Index */
+void mvLruCacheIdxUpdate(MV_LRU_CACHE* pLruHndl, int cacheIdx);
+
+/* Delete LRU cache entry */
+void mvLruCacheIdxDelete(MV_LRU_CACHE* pLruHndl, int cacheIdx);
+
+
+#endif /* __mvLru_h__ */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mvMD5.h"
+
+static void mvMD5Transform(MV_U32 buf[4], MV_U32 const in[MV_MD5_MAC_LEN]);
+
+#ifdef MV_CPU_LE
+#define mvByteReverse(buf, len) /* Nothing */
+#else
+static void mvByteReverse(unsigned char *buf, unsigned longs);
+
+/*
+ * Note: this code is harmless on little-endian machines.
+ */
+static void mvByteReverse(unsigned char *buf, unsigned longs)
+{
+ MV_U32 t;
+
+ do
+ {
+ t = (MV_U32) ((unsigned) buf[3] << 8 | buf[2]) << 16 |
+ ((unsigned) buf[1] << 8 | buf[0]);
+ *(MV_U32 *) buf = t;
+ buf += 4;
+ } while (--longs);
+}
+#endif
+
+/*
+ * Start MD5 accumulation. Set bit count to 0 and buffer to mysterious
+ * initialization constants.
+ */
+void mvMD5Init(MV_MD5_CONTEXT *ctx)
+{
+ ctx->buf[0] = 0x67452301;
+ ctx->buf[1] = 0xefcdab89;
+ ctx->buf[2] = 0x98badcfe;
+ ctx->buf[3] = 0x10325476;
+
+ ctx->bits[0] = 0;
+ ctx->bits[1] = 0;
+}
+
+/*
+ * Update context to reflect the concatenation of another buffer full
+ * of bytes.
+ */
+void mvMD5Update(MV_MD5_CONTEXT *ctx, unsigned char const *buf, unsigned len)
+{
+ MV_U32 t;
+
+ /* Update bitcount */
+
+ t = ctx->bits[0];
+ if ((ctx->bits[0] = t + ((MV_U32) len << 3)) < t)
+ ctx->bits[1]++; /* Carry from low to high */
+ ctx->bits[1] += len >> 29;
+
+ t = (t >> 3) & 0x3f; /* Bytes already in shsInfo->data */
+
+ /* Handle any leading odd-sized chunks */
+
+ if (t)
+ {
+ unsigned char *p = (unsigned char *) ctx->in + t;
+
+ t = 64 - t;
+ if (len < t)
+ {
+ memcpy(p, buf, len);
+ return;
+ }
+ memcpy(p, buf, t);
+ mvByteReverse(ctx->in, MV_MD5_MAC_LEN);
+ mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in);
+ buf += t;
+ len -= t;
+ }
+ /* Process data in 64-byte chunks */
+
+ while (len >= 64)
+ {
+ memcpy(ctx->in, buf, 64);
+ mvByteReverse(ctx->in, MV_MD5_MAC_LEN);
+ mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in);
+ buf += 64;
+ len -= 64;
+ }
+
+ /* Handle any remaining bytes of data. */
+
+ memcpy(ctx->in, buf, len);
+}
+
+/*
+ * Final wrapup - pad to 64-byte boundary with the bit pattern
+ * 1 0* (64-bit count of bits processed, MSB-first)
+ */
+void mvMD5Final(unsigned char digest[MV_MD5_MAC_LEN], MV_MD5_CONTEXT *ctx)
+{
+ unsigned count;
+ unsigned char *p;
+
+ /* Compute number of bytes mod 64 */
+ count = (ctx->bits[0] >> 3) & 0x3F;
+
+ /* Set the first char of padding to 0x80. This is safe since there is
+ always at least one byte free */
+ p = ctx->in + count;
+ *p++ = 0x80;
+
+ /* Bytes of padding needed to make 64 bytes */
+ count = 64 - 1 - count;
+
+ /* Pad out to 56 mod 64 */
+ if (count < 8)
+ {
+ /* Two lots of padding: Pad the first block to 64 bytes */
+ memset(p, 0, count);
+ mvByteReverse(ctx->in, MV_MD5_MAC_LEN);
+ mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in);
+
+ /* Now fill the next block with 56 bytes */
+ memset(ctx->in, 0, 56);
+ }
+ else
+ {
+ /* Pad block to 56 bytes */
+ memset(p, 0, count - 8);
+ }
+ mvByteReverse(ctx->in, 14);
+
+ /* Append length in bits and transform */
+ ((MV_U32 *) ctx->in)[14] = ctx->bits[0];
+ ((MV_U32 *) ctx->in)[15] = ctx->bits[1];
+
+ mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in);
+ mvByteReverse((unsigned char *) ctx->buf, 4);
+ memcpy(digest, ctx->buf, MV_MD5_MAC_LEN);
+ memset(ctx, 0, sizeof(ctx)); /* In case it's sensitive */
+}
+
+/* The four core functions - F1 is optimized somewhat */
+
+/* #define F1(x, y, z) (x & y | ~x & z) */
+#define F1(x, y, z) (z ^ (x & (y ^ z)))
+#define F2(x, y, z) F1(z, x, y)
+#define F3(x, y, z) (x ^ y ^ z)
+#define F4(x, y, z) (y ^ (x | ~z))
+
+/* This is the central step in the MD5 algorithm. */
+#define MD5STEP(f, w, x, y, z, data, s) \
+ ( w += f(x, y, z) + data, w = w<<s | w>>(32-s), w += x )
+
+/*
+ * The core of the MD5 algorithm, this alters an existing MD5 hash to
+ * reflect the addition of 16 longwords of new data. MD5Update blocks
+ * the data and converts bytes into longwords for this routine.
+ */
+static void mvMD5Transform(MV_U32 buf[4], MV_U32 const in[MV_MD5_MAC_LEN])
+{
+ register MV_U32 a, b, c, d;
+
+ a = buf[0];
+ b = buf[1];
+ c = buf[2];
+ d = buf[3];
+
+ MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7);
+ MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12);
+ MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17);
+ MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22);
+ MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7);
+ MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12);
+ MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17);
+ MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22);
+ MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7);
+ MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12);
+ MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17);
+ MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22);
+ MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7);
+ MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12);
+ MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17);
+ MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22);
+
+ MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5);
+ MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9);
+ MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14);
+ MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20);
+ MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5);
+ MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9);
+ MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14);
+ MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20);
+ MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5);
+ MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9);
+ MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14);
+ MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20);
+ MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5);
+ MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9);
+ MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14);
+ MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20);
+
+ MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4);
+ MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11);
+ MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16);
+ MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23);
+ MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4);
+ MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11);
+ MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16);
+ MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23);
+ MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4);
+ MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11);
+ MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16);
+ MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23);
+ MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4);
+ MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11);
+ MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16);
+ MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23);
+
+ MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6);
+ MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10);
+ MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15);
+ MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21);
+ MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6);
+ MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10);
+ MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15);
+ MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21);
+ MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6);
+ MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10);
+ MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15);
+ MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21);
+ MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6);
+ MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10);
+ MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15);
+ MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21);
+
+ buf[0] += a;
+ buf[1] += b;
+ buf[2] += c;
+ buf[3] += d;
+}
+
+void mvMD5(unsigned char const *buf, unsigned len, unsigned char* digest)
+{
+ MV_MD5_CONTEXT ctx;
+
+ mvMD5Init(&ctx);
+ mvMD5Update(&ctx, buf, len);
+ mvMD5Final(digest, &ctx);
+}
+
+
+void mvHmacMd5(unsigned char const* text, int text_len,
+ unsigned char const* key, int key_len,
+ unsigned char* digest)
+{
+ int i;
+ MV_MD5_CONTEXT ctx;
+ unsigned char k_ipad[64+1]; /* inner padding - key XORd with ipad */
+ unsigned char k_opad[64+1]; /* outer padding - key XORd with opad */
+
+ /* start out by storing key in pads */
+ memset(k_ipad, 0, 64);
+ memcpy(k_ipad, key, key_len);
+ memset(k_opad, 0, 64);
+ memcpy(k_opad, key, key_len);
+
+ /* XOR key with ipad and opad values */
+ for (i=0; i<64; i++)
+ {
+ k_ipad[i] ^= 0x36;
+ k_opad[i] ^= 0x5c;
+ }
+
+ /* perform inner MD5 */
+ mvMD5Init(&ctx); /* init ctx for 1st pass */
+ mvMD5Update(&ctx, k_ipad, 64); /* start with inner pad */
+ mvMD5Update(&ctx, text, text_len); /* then text of datagram */
+ mvMD5Final(digest, &ctx); /* finish up 1st pass */
+
+ /* perform outer MD5 */
+ mvMD5Init(&ctx); /* init ctx for 2nd pass */
+ mvMD5Update(&ctx, k_opad, 64); /* start with outer pad */
+ mvMD5Update(&ctx, digest, 16); /* then results of 1st hash */
+ mvMD5Final(digest, &ctx); /* finish up 2nd pass */
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __mvMD5_h__
+#define __mvMD5_h__
+
+#include "mvMD5.h"
+
+#define MV_MD5_MAC_LEN 16
+
+
+typedef struct
+{
+ MV_U32 buf[4];
+ MV_U32 bits[2];
+ MV_U8 in[64];
+
+} MV_MD5_CONTEXT;
+
+void mvMD5Init(MV_MD5_CONTEXT *context);
+void mvMD5Update(MV_MD5_CONTEXT *context, unsigned char const *buf,
+ unsigned len);
+void mvMD5Final(unsigned char digest[16], MV_MD5_CONTEXT *context);
+
+void mvMD5(unsigned char const *buf, unsigned len, unsigned char* digest);
+
+void mvHmacMd5(unsigned char const* text, int text_len,
+ unsigned char const* key, int key_len,
+ unsigned char* digest);
+
+
+#endif /* __mvMD5_h__ */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mvSHA1.h"
+
+#define SHA1HANDSOFF
+
+typedef union
+{
+ MV_U8 c[64];
+ MV_U32 l[16];
+
+} CHAR64LONG16;
+
+static void mvSHA1Transform(MV_U32 state[5], const MV_U8 *buffer);
+
+#define rol(value, bits) (((value) << (bits)) | ((value) >> (32 - (bits))))
+
+
+#ifdef MV_CPU_LE
+#define blk0(i) (block->l[i] = (rol(block->l[i], 24) & 0xFF00FF00) | \
+ (rol(block->l[i], 8) & 0x00FF00FF))
+#else
+#define blk0(i) block->l[i]
+#endif
+#define blk(i) (block->l[i & 15] = rol(block->l[(i + 13) & 15] ^ \
+ block->l[(i + 8) & 15] ^ block->l[(i + 2) & 15] ^ block->l[i & 15], 1))
+
+/* (R0+R1), R2, R3, R4 are the different operations used in SHA1 */
+#define R0(v,w,x,y,z,i) \
+ z += ((w & (x ^ y)) ^ y) + blk0(i) + 0x5A827999 + rol(v, 5); \
+ w = rol(w, 30);
+#define R1(v,w,x,y,z,i) \
+ z += ((w & (x ^ y)) ^ y) + blk(i) + 0x5A827999 + rol(v, 5); \
+ w = rol(w, 30);
+#define R2(v,w,x,y,z,i) \
+ z += (w ^ x ^ y) + blk(i) + 0x6ED9EBA1 + rol(v, 5); w = rol(w, 30);
+#define R3(v,w,x,y,z,i) \
+ z += (((w | x) & y) | (w & x)) + blk(i) + 0x8F1BBCDC + rol(v, 5); \
+ w = rol(w, 30);
+#define R4(v,w,x,y,z,i) \
+ z += (w ^ x ^ y) + blk(i) + 0xCA62C1D6 + rol(v, 5); \
+ w=rol(w, 30);
+
+/* Hash a single 512-bit block. This is the core of the algorithm. */
+static void mvSHA1Transform(MV_U32 state[5], const MV_U8 *buffer)
+{
+ MV_U32 a, b, c, d, e;
+ CHAR64LONG16* block;
+
+#ifdef SHA1HANDSOFF
+ static MV_U32 workspace[16];
+
+ block = (CHAR64LONG16 *) workspace;
+ memcpy(block, buffer, 64);
+#else
+ block = (CHAR64LONG16 *) buffer;
+#endif
+ /* Copy context->state[] to working vars */
+ a = state[0];
+ b = state[1];
+ c = state[2];
+ d = state[3];
+ e = state[4];
+ /* 4 rounds of 20 operations each. Loop unrolled. */
+ R0(a,b,c,d,e, 0); R0(e,a,b,c,d, 1); R0(d,e,a,b,c, 2); R0(c,d,e,a,b, 3);
+ R0(b,c,d,e,a, 4); R0(a,b,c,d,e, 5); R0(e,a,b,c,d, 6); R0(d,e,a,b,c, 7);
+ R0(c,d,e,a,b, 8); R0(b,c,d,e,a, 9); R0(a,b,c,d,e,10); R0(e,a,b,c,d,11);
+ R0(d,e,a,b,c,12); R0(c,d,e,a,b,13); R0(b,c,d,e,a,14); R0(a,b,c,d,e,15);
+ R1(e,a,b,c,d,16); R1(d,e,a,b,c,17); R1(c,d,e,a,b,18); R1(b,c,d,e,a,19);
+ R2(a,b,c,d,e,20); R2(e,a,b,c,d,21); R2(d,e,a,b,c,22); R2(c,d,e,a,b,23);
+ R2(b,c,d,e,a,24); R2(a,b,c,d,e,25); R2(e,a,b,c,d,26); R2(d,e,a,b,c,27);
+ R2(c,d,e,a,b,28); R2(b,c,d,e,a,29); R2(a,b,c,d,e,30); R2(e,a,b,c,d,31);
+ R2(d,e,a,b,c,32); R2(c,d,e,a,b,33); R2(b,c,d,e,a,34); R2(a,b,c,d,e,35);
+ R2(e,a,b,c,d,36); R2(d,e,a,b,c,37); R2(c,d,e,a,b,38); R2(b,c,d,e,a,39);
+ R3(a,b,c,d,e,40); R3(e,a,b,c,d,41); R3(d,e,a,b,c,42); R3(c,d,e,a,b,43);
+ R3(b,c,d,e,a,44); R3(a,b,c,d,e,45); R3(e,a,b,c,d,46); R3(d,e,a,b,c,47);
+ R3(c,d,e,a,b,48); R3(b,c,d,e,a,49); R3(a,b,c,d,e,50); R3(e,a,b,c,d,51);
+ R3(d,e,a,b,c,52); R3(c,d,e,a,b,53); R3(b,c,d,e,a,54); R3(a,b,c,d,e,55);
+ R3(e,a,b,c,d,56); R3(d,e,a,b,c,57); R3(c,d,e,a,b,58); R3(b,c,d,e,a,59);
+ R4(a,b,c,d,e,60); R4(e,a,b,c,d,61); R4(d,e,a,b,c,62); R4(c,d,e,a,b,63);
+ R4(b,c,d,e,a,64); R4(a,b,c,d,e,65); R4(e,a,b,c,d,66); R4(d,e,a,b,c,67);
+ R4(c,d,e,a,b,68); R4(b,c,d,e,a,69); R4(a,b,c,d,e,70); R4(e,a,b,c,d,71);
+ R4(d,e,a,b,c,72); R4(c,d,e,a,b,73); R4(b,c,d,e,a,74); R4(a,b,c,d,e,75);
+ R4(e,a,b,c,d,76); R4(d,e,a,b,c,77); R4(c,d,e,a,b,78); R4(b,c,d,e,a,79);
+ /* Add the working vars back into context.state[] */
+ state[0] += a;
+ state[1] += b;
+ state[2] += c;
+ state[3] += d;
+ state[4] += e;
+ /* Wipe variables */
+ a = b = c = d = e = 0;
+}
+
+void mvSHA1Init(MV_SHA1_CTX* context)
+{
+ /* SHA1 initialization constants */
+ context->state[0] = 0x67452301;
+ context->state[1] = 0xEFCDAB89;
+ context->state[2] = 0x98BADCFE;
+ context->state[3] = 0x10325476;
+ context->state[4] = 0xC3D2E1F0;
+ context->count[0] = context->count[1] = 0;
+}
+
+
+/* Run your data through this. */
+void mvSHA1Update(MV_SHA1_CTX *context, MV_U8 const *data,
+ unsigned int len)
+{
+ MV_U32 i, j;
+
+ j = (context->count[0] >> 3) & 63;
+ if ((context->count[0] += len << 3) < (len << 3))
+ context->count[1]++;
+ context->count[1] += (len >> 29);
+ if ((j + len) > 63)
+ {
+ memcpy(&context->buffer[j], data, (i = 64-j));
+ mvSHA1Transform(context->state, context->buffer);
+ for ( ; i + 63 < len; i += 64)
+ {
+ mvSHA1Transform(context->state, &data[i]);
+ }
+ j = 0;
+ }
+ else
+ {
+ i = 0;
+ }
+ memcpy(&context->buffer[j], &data[i], len - i);
+}
+
+void mvSHA1Final(MV_U8* digest, MV_SHA1_CTX* context)
+{
+ MV_U32 i;
+ MV_U8 finalcount[8];
+
+ for (i = 0; i < 8; i++)
+ {
+ finalcount[i] = (unsigned char)((context->count[(i >= 4 ? 0 : 1)] >>
+ ((3-(i & 3)) * 8) ) & 255); /* Endian independent */
+ }
+ mvSHA1Update(context, (const unsigned char *) "\200", 1);
+ while ((context->count[0] & 504) != 448)
+ {
+ mvSHA1Update(context, (const unsigned char *) "\0", 1);
+ }
+ mvSHA1Update(context, finalcount, 8); /* Should cause a mvSHA1Transform()
+ */
+ for (i = 0; i < 20; i++)
+ {
+ digest[i] = (unsigned char)
+ ((context->state[i >> 2] >> ((3 - (i & 3)) * 8)) & 255);
+ }
+ /* Wipe variables */
+ i = 0;
+ memset(context->buffer, 0, 64);
+ memset(context->state, 0, 20);
+ memset(context->count, 0, 8);
+ memset(finalcount, 0, 8);
+
+#ifdef SHA1HANDSOFF /* make SHA1Transform overwrite it's own static vars */
+ mvSHA1Transform(context->state, context->buffer);
+#endif
+}
+
+
+void mvSHA1(MV_U8 const *buf, unsigned int len, MV_U8* digest)
+{
+ MV_SHA1_CTX ctx;
+
+ mvSHA1Init(&ctx);
+ mvSHA1Update(&ctx, buf, len);
+ mvSHA1Final(digest, &ctx);
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __mvSHA1_h__
+#define __mvSHA1_h__
+
+#include "mvSHA1.h"
+
+#define MV_SHA1_MAC_LEN 20
+
+
+typedef struct
+{
+ MV_U32 state[5];
+ MV_U32 count[2];
+ MV_U8 buffer[64];
+
+} MV_SHA1_CTX;
+
+void mvSHA1Init(MV_SHA1_CTX *context);
+void mvSHA1Update(MV_SHA1_CTX *context, MV_U8 const *buf, unsigned int len);
+void mvSHA1Final(MV_U8* digest, MV_SHA1_CTX *context);
+
+void mvSHA1(MV_U8 const *buf, unsigned int len, MV_U8* digest);
+
+
+#endif /* __mvSHA1_h__ */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+*******************************************************************************/
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/crypto.h>
+#include <linux/mm.h>
+#include <linux/skbuff.h>
+#include <linux/random.h>
+#include <linux/platform_device.h>
+#include <asm/scatterlist.h>
+#include <linux/spinlock.h>
+#include "ctrlEnv/sys/mvSysCesa.h"
+#include "cesa/mvCesa.h" /* moved here before cryptodev.h due to include dependencies */
+#include <cryptodev.h>
+#include <uio.h>
+#include <plat/mv_cesa.h>
+#include <linux/mbus.h>
+#include "mvDebug.h"
+
+#include "cesa/mvMD5.h"
+#include "cesa/mvSHA1.h"
+
+#include "cesa/mvCesaRegs.h"
+#include "cesa/AES/mvAes.h"
+#include "cesa/mvLru.h"
+
+#undef RT_DEBUG
+#ifdef RT_DEBUG
+static int debug = 1;
+module_param(debug, int, 1);
+MODULE_PARM_DESC(debug, "Enable debug");
+#undef dprintk
+#define dprintk(a...) if (debug) { printk(a); } else
+#else
+static int debug = 0;
+#undef dprintk
+#define dprintk(a...)
+#endif
+
+
+/* TDMA Regs */
+#define WINDOW_BASE(i) 0xA00 + (i << 3)
+#define WINDOW_CTRL(i) 0xA04 + (i << 3)
+
+/* interrupt handling */
+#undef CESA_OCF_POLLING
+#undef CESA_OCF_TASKLET
+
+#if defined(CESA_OCF_POLLING) && defined(CESA_OCF_TASKLET)
+#error "don't use both tasklet and polling mode"
+#endif
+
+extern int cesaReqResources;
+/* support for spliting action into 2 actions */
+#define CESA_OCF_SPLIT
+
+/* general defines */
+#define CESA_OCF_MAX_SES 128
+#define CESA_Q_SIZE 64
+
+
+/* data structures */
+struct cesa_ocf_data {
+ int cipher_alg;
+ int auth_alg;
+ int encrypt_tn_auth;
+#define auth_tn_decrypt encrypt_tn_auth
+ int ivlen;
+ int digestlen;
+ short sid_encrypt;
+ short sid_decrypt;
+ /* fragment workaround sessions */
+ short frag_wa_encrypt;
+ short frag_wa_decrypt;
+ short frag_wa_auth;
+};
+
+/* CESA device data */
+struct cesa_dev {
+ void __iomem *sram;
+ void __iomem *reg;
+ struct mv_cesa_platform_data *plat_data;
+ int irq;
+};
+
+#define DIGEST_BUF_SIZE 32
+struct cesa_ocf_process {
+ MV_CESA_COMMAND cesa_cmd;
+ MV_CESA_MBUF cesa_mbuf;
+ MV_BUF_INFO cesa_bufs[MV_CESA_MAX_MBUF_FRAGS];
+ char digest[DIGEST_BUF_SIZE];
+ int digest_len;
+ struct cryptop *crp;
+ int need_cb;
+};
+
+/* global variables */
+static int32_t cesa_ocf_id = -1;
+static struct cesa_ocf_data *cesa_ocf_sessions[CESA_OCF_MAX_SES];
+static spinlock_t cesa_lock;
+static struct cesa_dev cesa_device;
+
+/* static APIs */
+static int cesa_ocf_process (device_t, struct cryptop *, int);
+static int cesa_ocf_newsession (device_t, u_int32_t *, struct cryptoini *);
+static int cesa_ocf_freesession (device_t, u_int64_t);
+static void cesa_callback (unsigned long);
+static irqreturn_t cesa_interrupt_handler (int, void *);
+#ifdef CESA_OCF_POLLING
+static void cesa_interrupt_polling(void);
+#endif
+#ifdef CESA_OCF_TASKLET
+static struct tasklet_struct cesa_ocf_tasklet;
+#endif
+
+static struct timeval tt_start;
+static struct timeval tt_end;
+
+/*
+ * dummy device structure
+ */
+
+static struct {
+ softc_device_decl sc_dev;
+} mv_cesa_dev;
+
+static device_method_t mv_cesa_methods = {
+ /* crypto device methods */
+ DEVMETHOD(cryptodev_newsession, cesa_ocf_newsession),
+ DEVMETHOD(cryptodev_freesession,cesa_ocf_freesession),
+ DEVMETHOD(cryptodev_process, cesa_ocf_process),
+ DEVMETHOD(cryptodev_kprocess, NULL),
+};
+
+
+
+/* Add debug Trace */
+#undef CESA_OCF_TRACE_DEBUG
+#ifdef CESA_OCF_TRACE_DEBUG
+
+#define MV_CESA_USE_TIMER_ID 0
+
+typedef struct
+{
+ int type; /* 0 - isrEmpty, 1 - cesaReadyGet, 2 - cesaAction */
+ MV_U32 timeStamp;
+ MV_U32 cause;
+ MV_U32 realCause;
+ MV_U32 dmaCause;
+ int resources;
+ MV_CESA_REQ* pReqReady;
+ MV_CESA_REQ* pReqEmpty;
+ MV_CESA_REQ* pReqProcess;
+} MV_CESA_TEST_TRACE;
+
+#define MV_CESA_TEST_TRACE_SIZE 50
+
+static int cesaTestTraceIdx = 0;
+static MV_CESA_TEST_TRACE cesaTestTrace[MV_CESA_TEST_TRACE_SIZE];
+
+static void cesaTestTraceAdd(int type)
+{
+ cesaTestTrace[cesaTestTraceIdx].type = type;
+ cesaTestTrace[cesaTestTraceIdx].realCause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG);
+ //cesaTestTrace[cesaTestTraceIdx].idmaCause = MV_REG_READ(IDMA_CAUSE_REG);
+ cesaTestTrace[cesaTestTraceIdx].resources = cesaReqResources;
+ cesaTestTrace[cesaTestTraceIdx].pReqReady = pCesaReqReady;
+ cesaTestTrace[cesaTestTraceIdx].pReqEmpty = pCesaReqEmpty;
+ cesaTestTrace[cesaTestTraceIdx].pReqProcess = pCesaReqProcess;
+ cesaTestTrace[cesaTestTraceIdx].timeStamp = mvCntmrRead(MV_CESA_USE_TIMER_ID);
+ cesaTestTraceIdx++;
+ if(cesaTestTraceIdx == MV_CESA_TEST_TRACE_SIZE)
+ cesaTestTraceIdx = 0;
+}
+
+#else /* CESA_OCF_TRACE_DEBUG */
+
+#define cesaTestTraceAdd(x)
+
+#endif /* CESA_OCF_TRACE_DEBUG */
+
+unsigned int
+get_usec(unsigned int start)
+{
+ if(start) {
+ do_gettimeofday (&tt_start);
+ return 0;
+ }
+ else {
+ do_gettimeofday (&tt_end);
+ tt_end.tv_sec -= tt_start.tv_sec;
+ tt_end.tv_usec -= tt_start.tv_usec;
+ if (tt_end.tv_usec < 0) {
+ tt_end.tv_usec += 1000 * 1000;
+ tt_end.tv_sec -= 1;
+ }
+ }
+ printk("time taken is %d\n", (unsigned int)(tt_end.tv_usec + tt_end.tv_sec * 1000000));
+ return (tt_end.tv_usec + tt_end.tv_sec * 1000000);
+}
+
+#ifdef RT_DEBUG
+/*
+ * check that the crp action match the current session
+ */
+static int
+ocf_check_action(struct cryptop *crp, struct cesa_ocf_data *cesa_ocf_cur_ses) {
+ int count = 0;
+ int encrypt = 0, decrypt = 0, auth = 0;
+ struct cryptodesc *crd;
+
+ /* Go through crypto descriptors, processing as we go */
+ for (crd = crp->crp_desc; crd; crd = crd->crd_next, count++) {
+ if(count > 2) {
+ printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__);
+ return 1;
+ }
+
+ /* Encryption /Decryption */
+ if(crd->crd_alg == cesa_ocf_cur_ses->cipher_alg) {
+ /* check that the action is compatible with session */
+ if(encrypt || decrypt) {
+ printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__);
+ return 1;
+ }
+
+ if(crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
+ if( (count == 2) && (cesa_ocf_cur_ses->encrypt_tn_auth) ) {
+ printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__);
+ return 1;
+ }
+ encrypt++;
+ }
+ else { /* decrypt */
+ if( (count == 2) && !(cesa_ocf_cur_ses->auth_tn_decrypt) ) {
+ printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__);
+ return 1;
+ }
+ decrypt++;
+ }
+
+ }
+ /* Authentication */
+ else if(crd->crd_alg == cesa_ocf_cur_ses->auth_alg) {
+ /* check that the action is compatible with session */
+ if(auth) {
+ printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__);
+ return 1;
+ }
+ if( (count == 2) && (decrypt) && (cesa_ocf_cur_ses->auth_tn_decrypt)) {
+ printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__);
+ return 1;
+ }
+ if( (count == 2) && (encrypt) && !(cesa_ocf_cur_ses->encrypt_tn_auth)) {
+ printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__);
+ return 1;
+ }
+ auth++;
+ }
+ else {
+ printk("%s,%d: Alg isn't supported by this session.\n", __FILE__, __LINE__);
+ return 1;
+ }
+ }
+ return 0;
+
+}
+#endif
+
+/*
+ * Process a request.
+ */
+static int
+cesa_ocf_process(device_t dev, struct cryptop *crp, int hint)
+{
+ struct cesa_ocf_process *cesa_ocf_cmd = NULL;
+ struct cesa_ocf_process *cesa_ocf_cmd_wa = NULL;
+ MV_CESA_COMMAND *cesa_cmd;
+ struct cryptodesc *crd;
+ struct cesa_ocf_data *cesa_ocf_cur_ses;
+ int sid = 0, temp_len = 0, i;
+ int encrypt = 0, decrypt = 0, auth = 0;
+ int status;
+ struct sk_buff *skb = NULL;
+ struct uio *uiop = NULL;
+ unsigned char *ivp;
+ MV_BUF_INFO *p_buf_info;
+ MV_CESA_MBUF *p_mbuf_info;
+ unsigned long flags;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ if( cesaReqResources <= 1 ) {
+ dprintk("%s,%d: ERESTART\n", __FILE__, __LINE__);
+ return ERESTART;
+ }
+
+#ifdef RT_DEBUG
+ /* Sanity check */
+ if (crp == NULL) {
+ printk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ if (crp->crp_desc == NULL || crp->crp_buf == NULL ) {
+ printk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ crp->crp_etype = EINVAL;
+ return EINVAL;
+ }
+
+ sid = crp->crp_sid & 0xffffffff;
+ if ((sid >= CESA_OCF_MAX_SES) || (cesa_ocf_sessions[sid] == NULL)) {
+ crp->crp_etype = ENOENT;
+ printk("%s,%d: ENOENT session %d \n", __FILE__, __LINE__, sid);
+ return EINVAL;
+ }
+#endif
+
+ sid = crp->crp_sid & 0xffffffff;
+ crp->crp_etype = 0;
+ cesa_ocf_cur_ses = cesa_ocf_sessions[sid];
+
+#ifdef RT_DEBUG
+ if(ocf_check_action(crp, cesa_ocf_cur_ses)){
+ goto p_error;
+ }
+#endif
+
+ /* malloc a new cesa process */
+ cesa_ocf_cmd = kmalloc(sizeof(struct cesa_ocf_process), GFP_ATOMIC);
+
+ if (cesa_ocf_cmd == NULL) {
+ printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__);
+ goto p_error;
+ }
+ memset(cesa_ocf_cmd, 0, sizeof(struct cesa_ocf_process));
+
+ /* init cesa_process */
+ cesa_ocf_cmd->crp = crp;
+ /* always call callback */
+ cesa_ocf_cmd->need_cb = 1;
+
+ /* init cesa_cmd for usage of the HALs */
+ cesa_cmd = &cesa_ocf_cmd->cesa_cmd;
+ cesa_cmd->pReqPrv = (void *)cesa_ocf_cmd;
+ cesa_cmd->sessionId = cesa_ocf_cur_ses->sid_encrypt; /* defualt use encrypt */
+
+ /* prepare src buffer */
+ /* we send the entire buffer to the HAL, even if only part of it should be encrypt/auth. */
+ /* if not using seesions for both encrypt and auth, then it will be wiser to to copy only */
+ /* from skip to crd_len. */
+ p_buf_info = cesa_ocf_cmd->cesa_bufs;
+ p_mbuf_info = &cesa_ocf_cmd->cesa_mbuf;
+
+ p_buf_info += 2; /* save 2 first buffers for IV and digest -
+ we won't append them to the end since, they
+ might be places in an unaligned addresses. */
+
+ p_mbuf_info->pFrags = p_buf_info;
+ temp_len = 0;
+
+ /* handle SKB */
+ if (crp->crp_flags & CRYPTO_F_SKBUF) {
+
+ dprintk("%s,%d: handle SKB.\n", __FILE__, __LINE__);
+ skb = (struct sk_buff *) crp->crp_buf;
+
+ if (skb_shinfo(skb)->nr_frags >= (MV_CESA_MAX_MBUF_FRAGS - 1)) {
+ printk("%s,%d: %d nr_frags > MV_CESA_MAX_MBUF_FRAGS", __FILE__, __LINE__, skb_shinfo(skb)->nr_frags);
+ goto p_error;
+ }
+
+ p_mbuf_info->mbufSize = skb->len;
+ temp_len = skb->len;
+ /* first skb fragment */
+ p_buf_info->bufSize = skb_headlen(skb);
+ p_buf_info->bufVirtPtr = skb->data;
+ p_buf_info++;
+
+ /* now handle all other skb fragments */
+ for ( i = 0; i < skb_shinfo(skb)->nr_frags; i++ ) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ p_buf_info->bufSize = frag->size;
+ p_buf_info->bufVirtPtr = page_address(frag->page) + frag->page_offset;
+ p_buf_info++;
+ }
+ p_mbuf_info->numFrags = skb_shinfo(skb)->nr_frags + 1;
+ }
+ /* handle UIO */
+ else if(crp->crp_flags & CRYPTO_F_IOV) {
+
+ dprintk("%s,%d: handle UIO.\n", __FILE__, __LINE__);
+ uiop = (struct uio *) crp->crp_buf;
+
+ if (uiop->uio_iovcnt > (MV_CESA_MAX_MBUF_FRAGS - 1)) {
+ printk("%s,%d: %d uio_iovcnt > MV_CESA_MAX_MBUF_FRAGS \n", __FILE__, __LINE__, uiop->uio_iovcnt);
+ goto p_error;
+ }
+
+ p_mbuf_info->mbufSize = crp->crp_ilen;
+ p_mbuf_info->numFrags = uiop->uio_iovcnt;
+ for(i = 0; i < uiop->uio_iovcnt; i++) {
+ p_buf_info->bufVirtPtr = uiop->uio_iov[i].iov_base;
+ p_buf_info->bufSize = uiop->uio_iov[i].iov_len;
+ temp_len += p_buf_info->bufSize;
+ dprintk("%s,%d: buf %x-> addr %x, size %x \n"
+ , __FILE__, __LINE__, i, (unsigned int)p_buf_info->bufVirtPtr, p_buf_info->bufSize);
+ p_buf_info++;
+ }
+
+ }
+ /* handle CONTIG */
+ else {
+ dprintk("%s,%d: handle CONTIG.\n", __FILE__, __LINE__);
+ p_mbuf_info->numFrags = 1;
+ p_mbuf_info->mbufSize = crp->crp_ilen;
+ p_buf_info->bufVirtPtr = crp->crp_buf;
+ p_buf_info->bufSize = crp->crp_ilen;
+ temp_len = crp->crp_ilen;
+ p_buf_info++;
+ }
+
+ /* Support up to 64K why? cause! */
+ if(crp->crp_ilen > 64*1024) {
+ printk("%s,%d: buf too big %x \n", __FILE__, __LINE__, crp->crp_ilen);
+ goto p_error;
+ }
+
+ if( temp_len != crp->crp_ilen ) {
+ printk("%s,%d: warning size don't match.(%x %x) \n", __FILE__, __LINE__, temp_len, crp->crp_ilen);
+ }
+
+ cesa_cmd->pSrc = p_mbuf_info;
+ cesa_cmd->pDst = p_mbuf_info;
+
+ /* restore p_buf_info to point to first available buf */
+ p_buf_info = cesa_ocf_cmd->cesa_bufs;
+ p_buf_info += 1;
+
+
+ /* Go through crypto descriptors, processing as we go */
+ for (crd = crp->crp_desc; crd; crd = crd->crd_next) {
+
+ /* Encryption /Decryption */
+ if(crd->crd_alg == cesa_ocf_cur_ses->cipher_alg) {
+
+ dprintk("%s,%d: cipher", __FILE__, __LINE__);
+
+ cesa_cmd->cryptoOffset = crd->crd_skip;
+ cesa_cmd->cryptoLength = crd->crd_len;
+
+ if(crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
+ dprintk(" encrypt \n");
+ encrypt++;
+
+ /* handle IV */
+ if (crd->crd_flags & CRD_F_IV_EXPLICIT) { /* IV from USER */
+ dprintk("%s,%d: IV from USER (offset %x) \n", __FILE__, __LINE__, crd->crd_inject);
+ cesa_cmd->ivFromUser = 1;
+ ivp = crd->crd_iv;
+
+ /*
+ * do we have to copy the IV back to the buffer ?
+ */
+ if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+ dprintk("%s,%d: copy the IV back to the buffer\n", __FILE__, __LINE__);
+ cesa_cmd->ivOffset = crd->crd_inject;
+ crypto_copy_bits_back(crp->crp_buf, crd->crd_inject, ivp, cesa_ocf_cur_ses->ivlen);
+ }
+ else {
+ dprintk("%s,%d: don't copy the IV back to the buffer \n", __FILE__, __LINE__);
+ p_mbuf_info->numFrags++;
+ p_mbuf_info->mbufSize += cesa_ocf_cur_ses->ivlen;
+ p_mbuf_info->pFrags = p_buf_info;
+
+ p_buf_info->bufVirtPtr = ivp;
+ p_buf_info->bufSize = cesa_ocf_cur_ses->ivlen;
+ p_buf_info--;
+
+ /* offsets */
+ cesa_cmd->ivOffset = 0;
+ cesa_cmd->cryptoOffset += cesa_ocf_cur_ses->ivlen;
+ if(auth) {
+ cesa_cmd->macOffset += cesa_ocf_cur_ses->ivlen;
+ cesa_cmd->digestOffset += cesa_ocf_cur_ses->ivlen;
+ }
+ }
+ }
+ else { /* random IV */
+ dprintk("%s,%d: random IV \n", __FILE__, __LINE__);
+ cesa_cmd->ivFromUser = 0;
+
+ /*
+ * do we have to copy the IV back to the buffer ?
+ */
+ /* in this mode the HAL will always copy the IV */
+ /* given by the session to the ivOffset */
+ if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+ cesa_cmd->ivOffset = crd->crd_inject;
+ }
+ else {
+ /* if IV isn't copy, then how will the user know which IV did we use??? */
+ printk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ goto p_error;
+ }
+ }
+ }
+ else { /* decrypt */
+ dprintk(" decrypt \n");
+ decrypt++;
+ cesa_cmd->sessionId = cesa_ocf_cur_ses->sid_decrypt;
+
+ /* handle IV */
+ if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
+ dprintk("%s,%d: IV from USER \n", __FILE__, __LINE__);
+ /* append the IV buf to the mbuf */
+ cesa_cmd->ivFromUser = 1;
+ p_mbuf_info->numFrags++;
+ p_mbuf_info->mbufSize += cesa_ocf_cur_ses->ivlen;
+ p_mbuf_info->pFrags = p_buf_info;
+
+ p_buf_info->bufVirtPtr = crd->crd_iv;
+ p_buf_info->bufSize = cesa_ocf_cur_ses->ivlen;
+ p_buf_info--;
+
+ /* offsets */
+ cesa_cmd->ivOffset = 0;
+ cesa_cmd->cryptoOffset += cesa_ocf_cur_ses->ivlen;
+ if(auth) {
+ cesa_cmd->macOffset += cesa_ocf_cur_ses->ivlen;
+ cesa_cmd->digestOffset += cesa_ocf_cur_ses->ivlen;
+ }
+ }
+ else {
+ dprintk("%s,%d: IV inside the buffer \n", __FILE__, __LINE__);
+ cesa_cmd->ivFromUser = 0;
+ cesa_cmd->ivOffset = crd->crd_inject;
+ }
+ }
+
+ }
+ /* Authentication */
+ else if(crd->crd_alg == cesa_ocf_cur_ses->auth_alg) {
+ dprintk("%s,%d: Authentication \n", __FILE__, __LINE__);
+ auth++;
+ cesa_cmd->macOffset = crd->crd_skip;
+ cesa_cmd->macLength = crd->crd_len;
+
+ /* digest + mac */
+ cesa_cmd->digestOffset = crd->crd_inject;
+ }
+ else {
+ printk("%s,%d: Alg isn't supported by this session.\n", __FILE__, __LINE__);
+ goto p_error;
+ }
+ }
+
+ dprintk("\n");
+ dprintk("%s,%d: Sending Action: \n", __FILE__, __LINE__);
+ dprintk("%s,%d: IV from user: %d. IV offset %x \n", __FILE__, __LINE__, cesa_cmd->ivFromUser, cesa_cmd->ivOffset);
+ dprintk("%s,%d: crypt offset %x len %x \n", __FILE__, __LINE__, cesa_cmd->cryptoOffset, cesa_cmd->cryptoLength);
+ dprintk("%s,%d: Auth offset %x len %x \n", __FILE__, __LINE__, cesa_cmd->macOffset, cesa_cmd->macLength);
+ dprintk("%s,%d: set digest in offset %x . \n", __FILE__, __LINE__, cesa_cmd->digestOffset);
+ if(debug) {
+ mvCesaDebugMbuf("SRC BUFFER", cesa_cmd->pSrc, 0, cesa_cmd->pSrc->mbufSize);
+ }
+
+
+ /* send action to HAL */
+ spin_lock_irqsave(&cesa_lock, flags);
+ status = mvCesaAction(cesa_cmd);
+ spin_unlock_irqrestore(&cesa_lock, flags);
+
+ /* action not allowed */
+ if(status == MV_NOT_ALLOWED) {
+#ifdef CESA_OCF_SPLIT
+ /* if both encrypt and auth try to split */
+ if(auth && (encrypt || decrypt)) {
+ MV_CESA_COMMAND *cesa_cmd_wa;
+
+ /* malloc a new cesa process and init it */
+ cesa_ocf_cmd_wa = kmalloc(sizeof(struct cesa_ocf_process), GFP_ATOMIC);
+
+ if (cesa_ocf_cmd_wa == NULL) {
+ printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__);
+ goto p_error;
+ }
+ memcpy(cesa_ocf_cmd_wa, cesa_ocf_cmd, sizeof(struct cesa_ocf_process));
+ cesa_cmd_wa = &cesa_ocf_cmd_wa->cesa_cmd;
+ cesa_cmd_wa->pReqPrv = (void *)cesa_ocf_cmd_wa;
+ cesa_ocf_cmd_wa->need_cb = 0;
+
+ /* break requests to two operation, first operation completion won't call callback */
+ if((decrypt) && (cesa_ocf_cur_ses->auth_tn_decrypt)) {
+ cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_auth;
+ cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_decrypt;
+ }
+ else if((decrypt) && !(cesa_ocf_cur_ses->auth_tn_decrypt)) {
+ cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_decrypt;
+ cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_auth;
+ }
+ else if((encrypt) && (cesa_ocf_cur_ses->encrypt_tn_auth)) {
+ cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_encrypt;
+ cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_auth;
+ }
+ else if((encrypt) && !(cesa_ocf_cur_ses->encrypt_tn_auth)){
+ cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_auth;
+ cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_encrypt;
+ }
+ else {
+ printk("%s,%d: Unsupporterd fragment wa mode \n", __FILE__, __LINE__);
+ goto p_error;
+ }
+
+ /* send the 2 actions to the HAL */
+ spin_lock_irqsave(&cesa_lock, flags);
+ status = mvCesaAction(cesa_cmd_wa);
+ spin_unlock_irqrestore(&cesa_lock, flags);
+
+ if((status != MV_NO_MORE) && (status != MV_OK)) {
+ printk("%s,%d: cesa action failed, status = 0x%x\n", __FILE__, __LINE__, status);
+ goto p_error;
+ }
+ spin_lock_irqsave(&cesa_lock, flags);
+ status = mvCesaAction(cesa_cmd);
+ spin_unlock_irqrestore(&cesa_lock, flags);
+
+ }
+ /* action not allowed and can't split */
+ else
+#endif
+ {
+ goto p_error;
+ }
+ }
+
+ /* Hal Q is full, send again. This should never happen */
+ if(status == MV_NO_RESOURCE) {
+ printk("%s,%d: cesa no more resources \n", __FILE__, __LINE__);
+ if(cesa_ocf_cmd)
+ kfree(cesa_ocf_cmd);
+ if(cesa_ocf_cmd_wa)
+ kfree(cesa_ocf_cmd_wa);
+ return ERESTART;
+ }
+ else if((status != MV_NO_MORE) && (status != MV_OK)) {
+ printk("%s,%d: cesa action failed, status = 0x%x\n", __FILE__, __LINE__, status);
+ goto p_error;
+ }
+
+
+#ifdef CESA_OCF_POLLING
+ cesa_interrupt_polling();
+#endif
+ cesaTestTraceAdd(5);
+
+ return 0;
+p_error:
+ crp->crp_etype = EINVAL;
+ if(cesa_ocf_cmd)
+ kfree(cesa_ocf_cmd);
+ if(cesa_ocf_cmd_wa)
+ kfree(cesa_ocf_cmd_wa);
+ return EINVAL;
+}
+
+/*
+ * cesa callback.
+ */
+static void
+cesa_callback(unsigned long dummy)
+{
+ struct cesa_ocf_process *cesa_ocf_cmd = NULL;
+ struct cryptop *crp = NULL;
+ MV_CESA_RESULT result[MV_CESA_MAX_CHAN];
+ int res_idx = 0,i;
+ MV_STATUS status;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+#ifdef CESA_OCF_TASKLET
+ disable_irq(cesa_device.irq);
+#endif
+ while(MV_TRUE) {
+
+ /* Get Ready requests */
+ spin_lock(&cesa_lock);
+ status = mvCesaReadyGet(&result[res_idx]);
+ spin_unlock(&cesa_lock);
+
+ cesaTestTraceAdd(2);
+
+ if(status != MV_OK) {
+#ifdef CESA_OCF_POLLING
+ if(status == MV_BUSY) { /* Fragment */
+ cesa_interrupt_polling();
+ return;
+ }
+#endif
+ break;
+ }
+ res_idx++;
+ break;
+ }
+
+ for(i = 0; i < res_idx; i++) {
+
+ if(!result[i].pReqPrv) {
+ printk("%s,%d: warning private is NULL\n", __FILE__, __LINE__);
+ break;
+ }
+
+ cesa_ocf_cmd = result[i].pReqPrv;
+ crp = cesa_ocf_cmd->crp;
+
+ // ignore HMAC error.
+ //if(result->retCode)
+ // crp->crp_etype = EIO;
+
+#if defined(CESA_OCF_POLLING)
+ if(!cesa_ocf_cmd->need_cb){
+ cesa_interrupt_polling();
+ }
+#endif
+ if(cesa_ocf_cmd->need_cb) {
+ if(debug) {
+ mvCesaDebugMbuf("DST BUFFER", cesa_ocf_cmd->cesa_cmd.pDst, 0, cesa_ocf_cmd->cesa_cmd.pDst->mbufSize);
+ }
+ crypto_done(crp);
+ }
+ kfree(cesa_ocf_cmd);
+ }
+#ifdef CESA_OCF_TASKLET
+ enable_irq(cesa_device.irq);
+#endif
+
+ cesaTestTraceAdd(3);
+
+ return;
+}
+
+#ifdef CESA_OCF_POLLING
+static void
+cesa_interrupt_polling(void)
+{
+ u32 cause;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ /* Read cause register */
+ do {
+ cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG);
+ cause &= MV_CESA_CAUSE_ACC_DMA_ALL_MASK;
+
+ } while (cause == 0);
+
+ /* clear interrupts */
+ MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0);
+
+ cesa_callback(0);
+
+ return;
+}
+
+#endif
+
+/*
+ * cesa Interrupt polling routine.
+ */
+static irqreturn_t
+cesa_interrupt_handler(int irq, void *arg)
+{
+ u32 cause;
+
+ dprintk("%s()\n", __FUNCTION__);
+
+ cesaTestTraceAdd(0);
+
+ /* Read cause register */
+ cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG);
+
+ if( (cause & MV_CESA_CAUSE_ACC_DMA_ALL_MASK) == 0)
+ {
+ /* Empty interrupt */
+ dprintk("%s,%d: cesaTestReadyIsr: cause=0x%x\n", __FILE__, __LINE__, cause);
+ return IRQ_HANDLED;
+ }
+
+ /* clear interrupts */
+ MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0);
+
+ cesaTestTraceAdd(1);
+#ifdef CESA_OCF_TASKLET
+ tasklet_hi_schedule(&cesa_ocf_tasklet);
+#else
+ cesa_callback(0);
+#endif
+ return IRQ_HANDLED;
+}
+
+/*
+ * Open a session.
+ */
+static int
+/*cesa_ocf_newsession(void *arg, u_int32_t *sid, struct cryptoini *cri)*/
+cesa_ocf_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri)
+{
+ u32 status = 0, i;
+ u32 count = 0, auth = 0, encrypt =0;
+ struct cesa_ocf_data *cesa_ocf_cur_ses;
+ MV_CESA_OPEN_SESSION cesa_session;
+ MV_CESA_OPEN_SESSION *cesa_ses = &cesa_session;
+
+
+ dprintk("%s()\n", __FUNCTION__);
+ if (sid == NULL || cri == NULL) {
+ printk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ /* leave first empty like in other implementations */
+ for (i = 1; i < CESA_OCF_MAX_SES; i++) {
+ if (cesa_ocf_sessions[i] == NULL)
+ break;
+ }
+
+ if(i >= CESA_OCF_MAX_SES) {
+ printk("%s,%d: no more sessions \n", __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ cesa_ocf_sessions[i] = (struct cesa_ocf_data *) kmalloc(sizeof(struct cesa_ocf_data), GFP_ATOMIC);
+ if (cesa_ocf_sessions[i] == NULL) {
+ cesa_ocf_freesession(NULL, i);
+ printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__);
+ return ENOBUFS;
+ }
+ dprintk("%s,%d: new session %d \n", __FILE__, __LINE__, i);
+
+ *sid = i;
+ cesa_ocf_cur_ses = cesa_ocf_sessions[i];
+ memset(cesa_ocf_cur_ses, 0, sizeof(struct cesa_ocf_data));
+ cesa_ocf_cur_ses->sid_encrypt = -1;
+ cesa_ocf_cur_ses->sid_decrypt = -1;
+ cesa_ocf_cur_ses->frag_wa_encrypt = -1;
+ cesa_ocf_cur_ses->frag_wa_decrypt = -1;
+ cesa_ocf_cur_ses->frag_wa_auth = -1;
+
+ /* init the session */
+ memset(cesa_ses, 0, sizeof(MV_CESA_OPEN_SESSION));
+ count = 1;
+ while (cri) {
+ if(count > 2) {
+ printk("%s,%d: don't support more then 2 operations\n", __FILE__, __LINE__);
+ goto error;
+ }
+ switch (cri->cri_alg) {
+ case CRYPTO_AES_CBC:
+ dprintk("%s,%d: (%d) AES CBC \n", __FILE__, __LINE__, count);
+ cesa_ocf_cur_ses->cipher_alg = cri->cri_alg;
+ cesa_ocf_cur_ses->ivlen = MV_CESA_AES_BLOCK_SIZE;
+ cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_AES;
+ cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC;
+ if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) {
+ printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__);
+ goto error;
+ }
+ memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8);
+ dprintk("%s,%d: key length %d \n", __FILE__, __LINE__, cri->cri_klen/8);
+ cesa_ses->cryptoKeyLength = cri->cri_klen/8;
+ encrypt += count;
+ break;
+ case CRYPTO_3DES_CBC:
+ dprintk("%s,%d: (%d) 3DES CBC \n", __FILE__, __LINE__, count);
+ cesa_ocf_cur_ses->cipher_alg = cri->cri_alg;
+ cesa_ocf_cur_ses->ivlen = MV_CESA_3DES_BLOCK_SIZE;
+ cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_3DES;
+ cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC;
+ if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) {
+ printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__);
+ goto error;
+ }
+ memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8);
+ cesa_ses->cryptoKeyLength = cri->cri_klen/8;
+ encrypt += count;
+ break;
+ case CRYPTO_DES_CBC:
+ dprintk("%s,%d: (%d) DES CBC \n", __FILE__, __LINE__, count);
+ cesa_ocf_cur_ses->cipher_alg = cri->cri_alg;
+ cesa_ocf_cur_ses->ivlen = MV_CESA_DES_BLOCK_SIZE;
+ cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_DES;
+ cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC;
+ if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) {
+ printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__);
+ goto error;
+ }
+ memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8);
+ cesa_ses->cryptoKeyLength = cri->cri_klen/8;
+ encrypt += count;
+ break;
+ case CRYPTO_MD5:
+ case CRYPTO_MD5_HMAC:
+ dprintk("%s,%d: (%d) %sMD5 CBC \n", __FILE__, __LINE__, count, (cri->cri_alg != CRYPTO_MD5)? "H-":" ");
+ cesa_ocf_cur_ses->auth_alg = cri->cri_alg;
+ cesa_ocf_cur_ses->digestlen = (cri->cri_alg == CRYPTO_MD5)? MV_CESA_MD5_DIGEST_SIZE : 12;
+ cesa_ses->macMode = (cri->cri_alg == CRYPTO_MD5)? MV_CESA_MAC_MD5 : MV_CESA_MAC_HMAC_MD5;
+ if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) {
+ printk("%s,%d: MAC key too long. \n", __FILE__, __LINE__);
+ goto error;
+ }
+ cesa_ses->macKeyLength = cri->cri_klen/8;
+ memcpy(cesa_ses->macKey, cri->cri_key, cri->cri_klen/8);
+ cesa_ses->digestSize = cesa_ocf_cur_ses->digestlen;
+ auth += count;
+ break;
+ case CRYPTO_SHA1:
+ case CRYPTO_SHA1_HMAC:
+ dprintk("%s,%d: (%d) %sSHA1 CBC \n", __FILE__, __LINE__, count, (cri->cri_alg != CRYPTO_SHA1)? "H-":" ");
+ cesa_ocf_cur_ses->auth_alg = cri->cri_alg;
+ cesa_ocf_cur_ses->digestlen = (cri->cri_alg == CRYPTO_SHA1)? MV_CESA_SHA1_DIGEST_SIZE : 12;
+ cesa_ses->macMode = (cri->cri_alg == CRYPTO_SHA1)? MV_CESA_MAC_SHA1 : MV_CESA_MAC_HMAC_SHA1;
+ if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) {
+ printk("%s,%d: MAC key too long. \n", __FILE__, __LINE__);
+ goto error;
+ }
+ cesa_ses->macKeyLength = cri->cri_klen/8;
+ memcpy(cesa_ses->macKey, cri->cri_key, cri->cri_klen/8);
+ cesa_ses->digestSize = cesa_ocf_cur_ses->digestlen;
+ auth += count;
+ break;
+ default:
+ printk("%s,%d: unknown algo 0x%x\n", __FILE__, __LINE__, cri->cri_alg);
+ goto error;
+ }
+ cri = cri->cri_next;
+ count++;
+ }
+
+ if((encrypt > 2) || (auth > 2)) {
+ printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__);
+ goto error;
+ }
+ /* create new sessions in HAL */
+ if(encrypt) {
+ cesa_ses->operation = MV_CESA_CRYPTO_ONLY;
+ /* encrypt session */
+ if(auth == 1) {
+ cesa_ses->operation = MV_CESA_MAC_THEN_CRYPTO;
+ }
+ else if(auth == 2) {
+ cesa_ses->operation = MV_CESA_CRYPTO_THEN_MAC;
+ cesa_ocf_cur_ses->encrypt_tn_auth = 1;
+ }
+ else {
+ cesa_ses->operation = MV_CESA_CRYPTO_ONLY;
+ }
+ cesa_ses->direction = MV_CESA_DIR_ENCODE;
+ status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_encrypt);
+ if(status != MV_OK) {
+ printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+ goto error;
+ }
+ /* decrypt session */
+ if( cesa_ses->operation == MV_CESA_MAC_THEN_CRYPTO ) {
+ cesa_ses->operation = MV_CESA_CRYPTO_THEN_MAC;
+ }
+ else if( cesa_ses->operation == MV_CESA_CRYPTO_THEN_MAC ) {
+ cesa_ses->operation = MV_CESA_MAC_THEN_CRYPTO;
+ }
+ cesa_ses->direction = MV_CESA_DIR_DECODE;
+ status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_decrypt);
+ if(status != MV_OK) {
+ printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+ goto error;
+ }
+
+ /* preapre one action sessions for case we will need to split an action */
+#ifdef CESA_OCF_SPLIT
+ if(( cesa_ses->operation == MV_CESA_MAC_THEN_CRYPTO ) ||
+ ( cesa_ses->operation == MV_CESA_CRYPTO_THEN_MAC )) {
+ /* open one session for encode and one for decode */
+ cesa_ses->operation = MV_CESA_CRYPTO_ONLY;
+ cesa_ses->direction = MV_CESA_DIR_ENCODE;
+ status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_encrypt);
+ if(status != MV_OK) {
+ printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+ goto error;
+ }
+
+ cesa_ses->direction = MV_CESA_DIR_DECODE;
+ status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_decrypt);
+ if(status != MV_OK) {
+ printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+ goto error;
+ }
+ /* open one session for auth */
+ cesa_ses->operation = MV_CESA_MAC_ONLY;
+ cesa_ses->direction = MV_CESA_DIR_ENCODE;
+ status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_auth);
+ if(status != MV_OK) {
+ printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+ goto error;
+ }
+ }
+#endif
+ }
+ else { /* only auth */
+ cesa_ses->operation = MV_CESA_MAC_ONLY;
+ cesa_ses->direction = MV_CESA_DIR_ENCODE;
+ status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_encrypt);
+ if(status != MV_OK) {
+ printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+ goto error;
+ }
+ }
+
+ return 0;
+error:
+ cesa_ocf_freesession(NULL, *sid);
+ return EINVAL;
+
+}
+
+
+/*
+ * Free a session.
+ */
+static int
+cesa_ocf_freesession(device_t dev, u_int64_t tid)
+{
+ struct cesa_ocf_data *cesa_ocf_cur_ses;
+ u_int32_t sid = CRYPTO_SESID2LID(tid);
+ //unsigned long flags;
+
+ dprintk("%s() %d \n", __FUNCTION__, sid);
+ if ( (sid >= CESA_OCF_MAX_SES) || (cesa_ocf_sessions[sid] == NULL) ) {
+ printk("%s,%d: EINVAL can't free session %d \n", __FILE__, __LINE__, sid);
+ return(EINVAL);
+ }
+
+ /* Silently accept and return */
+ if (sid == 0)
+ return(0);
+
+ /* release session from HAL */
+ cesa_ocf_cur_ses = cesa_ocf_sessions[sid];
+ if (cesa_ocf_cur_ses->sid_encrypt != -1) {
+ mvCesaSessionClose(cesa_ocf_cur_ses->sid_encrypt);
+ }
+ if (cesa_ocf_cur_ses->sid_decrypt != -1) {
+ mvCesaSessionClose(cesa_ocf_cur_ses->sid_decrypt);
+ }
+ if (cesa_ocf_cur_ses->frag_wa_encrypt != -1) {
+ mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_encrypt);
+ }
+ if (cesa_ocf_cur_ses->frag_wa_decrypt != -1) {
+ mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_decrypt);
+ }
+ if (cesa_ocf_cur_ses->frag_wa_auth != -1) {
+ mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_auth);
+ }
+
+ kfree(cesa_ocf_cur_ses);
+ cesa_ocf_sessions[sid] = NULL;
+
+ return 0;
+}
+
+
+/* TDMA Window setup */
+
+static void __init
+setup_tdma_mbus_windows(struct cesa_dev *dev)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ writel(0, dev->reg + WINDOW_BASE(i));
+ writel(0, dev->reg + WINDOW_CTRL(i));
+ }
+
+ for (i = 0; i < dev->plat_data->dram->num_cs; i++) {
+ struct mbus_dram_window *cs = dev->plat_data->dram->cs + i;
+ writel(
+ ((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dev->plat_data->dram->mbus_dram_target_id << 4) | 1,
+ dev->reg + WINDOW_CTRL(i)
+ );
+ writel(cs->base, dev->reg + WINDOW_BASE(i));
+ }
+}
+
+/*
+ * our driver startup and shutdown routines
+ */
+static int
+mv_cesa_ocf_init(struct platform_device *pdev)
+{
+#if defined(CONFIG_MV78200) || defined(CONFIG_MV632X)
+ if (MV_FALSE == mvSocUnitIsMappedToThisCpu(CESA))
+ {
+ dprintk("CESA is not mapped to this CPU\n");
+ return -ENODEV;
+ }
+#endif
+
+ dprintk("%s\n", __FUNCTION__);
+ memset(&mv_cesa_dev, 0, sizeof(mv_cesa_dev));
+ softc_device_init(&mv_cesa_dev, "MV CESA", 0, mv_cesa_methods);
+ cesa_ocf_id = crypto_get_driverid(softc_get_device(&mv_cesa_dev),CRYPTOCAP_F_HARDWARE);
+
+ if (cesa_ocf_id < 0)
+ panic("MV CESA crypto device cannot initialize!");
+
+ dprintk("%s,%d: cesa ocf device id is %d \n", __FILE__, __LINE__, cesa_ocf_id);
+
+ /* CESA unit is auto power on off */
+#if 0
+ if (MV_FALSE == mvCtrlPwrClckGet(CESA_UNIT_ID,0))
+ {
+ printk("\nWarning CESA %d is Powered Off\n",0);
+ return EINVAL;
+ }
+#endif
+
+ memset(&cesa_device, 0, sizeof(struct cesa_dev));
+ /* Get the IRQ, and crypto memory regions */
+ {
+ struct resource *res;
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sram");
+
+ if (!res)
+ return -ENXIO;
+
+ cesa_device.sram = ioremap(res->start, res->end - res->start + 1);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+
+ if (!res) {
+ iounmap(cesa_device.sram);
+ return -ENXIO;
+ }
+ cesa_device.reg = ioremap(res->start, res->end - res->start + 1);
+ cesa_device.irq = platform_get_irq(pdev, 0);
+ cesa_device.plat_data = pdev->dev.platform_data;
+ setup_tdma_mbus_windows(&cesa_device);
+
+ }
+
+
+ if( MV_OK != mvCesaInit(CESA_OCF_MAX_SES*5, CESA_Q_SIZE, cesa_device.reg,
+ NULL) ) {
+ printk("%s,%d: mvCesaInit Failed. \n", __FILE__, __LINE__);
+ return EINVAL;
+ }
+
+ /* clear and unmask Int */
+ MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0);
+#ifndef CESA_OCF_POLLING
+ MV_REG_WRITE( MV_CESA_ISR_MASK_REG, MV_CESA_CAUSE_ACC_DMA_MASK);
+#endif
+#ifdef CESA_OCF_TASKLET
+ tasklet_init(&cesa_ocf_tasklet, cesa_callback, (unsigned int) 0);
+#endif
+ /* register interrupt */
+ if( request_irq( cesa_device.irq, cesa_interrupt_handler,
+ (IRQF_DISABLED) , "cesa", &cesa_ocf_id) < 0) {
+ printk("%s,%d: cannot assign irq %x\n", __FILE__, __LINE__, cesa_device.reg);
+ return EINVAL;
+ }
+
+
+ memset(cesa_ocf_sessions, 0, sizeof(struct cesa_ocf_data *) * CESA_OCF_MAX_SES);
+
+#define REGISTER(alg) \
+ crypto_register(cesa_ocf_id, alg, 0,0)
+ REGISTER(CRYPTO_AES_CBC);
+ REGISTER(CRYPTO_DES_CBC);
+ REGISTER(CRYPTO_3DES_CBC);
+ REGISTER(CRYPTO_MD5);
+ REGISTER(CRYPTO_MD5_HMAC);
+ REGISTER(CRYPTO_SHA1);
+ REGISTER(CRYPTO_SHA1_HMAC);
+#undef REGISTER
+
+ return 0;
+}
+
+static void
+mv_cesa_ocf_exit(struct platform_device *pdev)
+{
+ dprintk("%s()\n", __FUNCTION__);
+
+ crypto_unregister_all(cesa_ocf_id);
+ cesa_ocf_id = -1;
+ iounmap(cesa_device.reg);
+ iounmap(cesa_device.sram);
+ free_irq(cesa_device.irq, NULL);
+
+ /* mask and clear Int */
+ MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0);
+ MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0);
+
+
+ if( MV_OK != mvCesaFinish() ) {
+ printk("%s,%d: mvCesaFinish Failed. \n", __FILE__, __LINE__);
+ return;
+ }
+}
+
+
+void cesa_ocf_debug(void)
+{
+
+#ifdef CESA_OCF_TRACE_DEBUG
+ {
+ int i, j;
+ j = cesaTestTraceIdx;
+ mvOsPrintf("No Type rCause iCause Proc Isr Res Time pReady pProc pEmpty\n");
+ for(i=0; i<MV_CESA_TEST_TRACE_SIZE; i++)
+ {
+ mvOsPrintf("%02d. %d 0x%04x 0x%04x 0x%02x 0x%02x %02d 0x%06x %p %p %p\n",
+ j, cesaTestTrace[j].type, cesaTestTrace[j].realCause,
+ cesaTestTrace[j].idmaCause,
+ cesaTestTrace[j].resources, cesaTestTrace[j].timeStamp,
+ cesaTestTrace[j].pReqReady, cesaTestTrace[j].pReqProcess, cesaTestTrace[j].pReqEmpty);
+ j++;
+ if(j == MV_CESA_TEST_TRACE_SIZE)
+ j = 0;
+ }
+ }
+#endif
+
+}
+
+static struct platform_driver marvell_cesa = {
+ .probe = mv_cesa_ocf_init,
+ .remove = mv_cesa_ocf_exit,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "mv_crypto",
+ },
+};
+
+MODULE_ALIAS("platform:mv_crypto");
+
+static int __init mv_cesa_init(void)
+{
+ return platform_driver_register(&marvell_cesa);
+}
+
+module_init(mv_cesa_init);
+
+static void __exit mv_cesa_exit(void)
+{
+ platform_driver_unregister(&marvell_cesa);
+}
+
+module_exit(mv_cesa_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ronen Shitrit");
+MODULE_DESCRIPTION("OCF module for Orion CESA crypto");
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmv802_3h
+#define __INCmv802_3h
+
+
+/* includes */
+#include "mvTypes.h"
+
+/* Defines */
+#define MV_MAX_ETH_DATA 1500
+
+/* 802.3 types */
+#define MV_IP_TYPE 0x0800
+#define MV_IP_ARP_TYPE 0x0806
+#define MV_APPLE_TALK_ARP_TYPE 0x80F3
+#define MV_NOVELL_IPX_TYPE 0x8137
+#define MV_EAPOL_TYPE 0x888e
+
+
+
+/* Encapsulation header for RFC1042 and Ethernet_tunnel */
+
+#define MV_RFC1042_SNAP_HEADER {0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00}
+
+#define MV_ETH_SNAP_LSB 0xF8
+
+
+#define MV_MAC_ADDR_SIZE (6)
+#define MV_MAC_STR_SIZE (20)
+#define MV_VLAN_HLEN (4)
+
+/* This macro checks for a multicast mac address */
+#define MV_IS_MULTICAST_MAC(mac) (((mac)[0] & 0x1) == 1)
+
+
+/* This macro checks for an broadcast mac address */
+#define MV_IS_BROADCAST_MAC(mac) \
+ (((mac)[0] == 0xFF) && \
+ ((mac)[1] == 0xFF) && \
+ ((mac)[2] == 0xFF) && \
+ ((mac)[3] == 0xFF) && \
+ ((mac)[4] == 0xFF) && \
+ ((mac)[5] == 0xFF))
+
+
+/* Typedefs */
+typedef struct
+{
+ MV_U8 pDA[MV_MAC_ADDR_SIZE];
+ MV_U8 pSA[MV_MAC_ADDR_SIZE];
+ MV_U16 typeOrLen;
+
+} MV_802_3_HEADER;
+
+enum {
+ MV_IP_PROTO_NULL = 0, /* Dummy protocol for TCP */
+ MV_IP_PROTO_ICMP = 1, /* Internet Control Message Protocol */
+ MV_IP_PROTO_IGMP = 2, /* Internet Group Management Protocol */
+ MV_IP_PROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */
+ MV_IP_PROTO_TCP = 6, /* Transmission Control Protocol */
+ MV_IP_PROTO_EGP = 8, /* Exterior Gateway Protocol */
+ MV_IP_PROTO_PUP = 12, /* PUP protocol */
+ MV_IP_PROTO_UDP = 17, /* User Datagram Protocol */
+ MV_IP_PROTO_IDP = 22, /* XNS IDP protocol */
+ MV_IP_PROTO_DCCP = 33, /* Datagram Congestion Control Protocol */
+ MV_IP_PROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */
+ MV_IP_PROTO_RSVP = 46, /* RSVP protocol */
+ MV_IP_PROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */
+ MV_IP_PROTO_ESP = 50, /* Encapsulation Security Payload protocol */
+ MV_IP_PROTO_AH = 51, /* Authentication Header protocol */
+ MV_IP_PROTO_BEETPH = 94, /* IP option pseudo header for BEET */
+ MV_IP_PROTO_PIM = 103,
+ MV_IP_PROTO_COMP = 108, /* Compression Header protocol */
+ MV_IP_PROTO_ZERO_HOP = 114, /* Any 0 hop protocol (IANA) */
+ MV_IP_PROTO_SCTP = 132, /* Stream Control Transport Protocol */
+ MV_IP_PROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */
+
+ MV_IP_PROTO_RAW = 255, /* Raw IP packets */
+ MV_IP_PROTO_MAX
+};
+
+typedef struct
+{
+ MV_U8 version;
+ MV_U8 tos;
+ MV_U16 totalLength;
+ MV_U16 identifier;
+ MV_U16 fragmentCtrl;
+ MV_U8 ttl;
+ MV_U8 protocol;
+ MV_U16 checksum;
+ MV_U32 srcIP;
+ MV_U32 dstIP;
+
+} MV_IP_HEADER;
+
+typedef struct
+{
+ MV_U32 spi;
+ MV_U32 seqNum;
+} MV_ESP_HEADER;
+
+#define MV_ICMP_ECHOREPLY 0 /* Echo Reply */
+#define MV_ICMP_DEST_UNREACH 3 /* Destination Unreachable */
+#define MV_ICMP_SOURCE_QUENCH 4 /* Source Quench */
+#define MV_ICMP_REDIRECT 5 /* Redirect (change route) */
+#define MV_ICMP_ECHO 8 /* Echo Request */
+#define MV_ICMP_TIME_EXCEEDED 11 /* Time Exceeded */
+#define MV_ICMP_PARAMETERPROB 12 /* Parameter Problem */
+#define MV_ICMP_TIMESTAMP 13 /* Timestamp Request */
+#define MV_ICMP_TIMESTAMPREPLY 14 /* Timestamp Reply */
+#define MV_ICMP_INFO_REQUEST 15 /* Information Request */
+#define MV_ICMP_INFO_REPLY 16 /* Information Reply */
+#define MV_ICMP_ADDRESS 17 /* Address Mask Request */
+#define MV_ICMP_ADDRESSREPLY 18 /* Address Mask Reply */
+
+typedef struct
+{
+ MV_U8 type;
+ MV_U8 code;
+ MV_U16 checksum;
+ MV_U16 id;
+ MV_U16 sequence;
+
+} MV_ICMP_ECHO_HEADER;
+
+typedef struct
+{
+ MV_U16 source;
+ MV_U16 dest;
+ MV_U32 seq;
+ MV_U32 ack_seq;
+ MV_U16 flags;
+ MV_U16 window;
+ MV_U16 chksum;
+ MV_U16 urg_offset;
+
+} MV_TCP_HEADER;
+
+typedef struct
+{
+ MV_U16 source;
+ MV_U16 dest;
+ MV_U16 len;
+ MV_U16 check;
+
+} MV_UDP_HEADER;
+
+#endif /* __INCmv802_3h */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mv802_3.h"
+#include "mvCommon.h"
+
+
+/*******************************************************************************
+* mvMacStrToHex - Convert MAC format string to hex.
+*
+* DESCRIPTION:
+* This function convert MAC format string to hex.
+*
+* INPUT:
+* macStr - MAC address string. Fornat of address string is
+* uu:vv:ww:xx:yy:zz, where ":" can be any delimiter.
+*
+* OUTPUT:
+* macHex - MAC in hex format.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvMacStrToHex(const char* macStr, MV_U8* macHex)
+{
+ int i;
+ char tmp[3];
+
+ for(i = 0; i < MV_MAC_ADDR_SIZE; i++)
+ {
+ tmp[0] = macStr[(i * 3) + 0];
+ tmp[1] = macStr[(i * 3) + 1];
+ tmp[2] = '\0';
+ macHex[i] = (MV_U8) (strtol(tmp, NULL, 16));
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvMacHexToStr - Convert MAC in hex format to string format.
+*
+* DESCRIPTION:
+* This function convert MAC in hex format to string format.
+*
+* INPUT:
+* macHex - MAC in hex format.
+*
+* OUTPUT:
+* macStr - MAC address string. String format is uu:vv:ww:xx:yy:zz.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvMacHexToStr(MV_U8* macHex, char* macStr)
+{
+ int i;
+
+ for(i = 0; i < MV_MAC_ADDR_SIZE; i++)
+ {
+ mvOsSPrintf(&macStr[i * 3], "%02x:", macHex[i]);
+ }
+ macStr[(i * 3) - 1] = '\0';
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSizePrint - Print the given size with size unit description.
+*
+* DESCRIPTION:
+* This function print the given size with size unit description.
+* FOr example when size paramter is 0x180000, the function prints:
+* "size 1MB+500KB"
+*
+* INPUT:
+* size - Size in bytes.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvSizePrint(MV_U32 size)
+{
+ mvOsOutput("size ");
+
+ if(size >= _1G)
+ {
+ mvOsOutput("%3dGB ", size / _1G);
+ size %= _1G;
+ if(size)
+ mvOsOutput("+");
+ }
+ if(size >= _1M )
+ {
+ mvOsOutput("%3dMB ", size / _1M);
+ size %= _1M;
+ if(size)
+ mvOsOutput("+");
+ }
+ if(size >= _1K)
+ {
+ mvOsOutput("%3dKB ", size / _1K);
+ size %= _1K;
+ if(size)
+ mvOsOutput("+");
+ }
+ if(size > 0)
+ {
+ mvOsOutput("%3dB ", size);
+ }
+}
+
+/*******************************************************************************
+* mvHexToBin - Convert hex to binary
+*
+* DESCRIPTION:
+* This function Convert hex to binary.
+*
+* INPUT:
+* pHexStr - hex buffer pointer.
+* size - Size to convert.
+*
+* OUTPUT:
+* pBin - Binary buffer pointer.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvHexToBin(const char* pHexStr, MV_U8* pBin, int size)
+{
+ int j, i;
+ char tmp[3];
+ MV_U8 byte;
+
+ for(j=0, i=0; j<size; j++, i+=2)
+ {
+ tmp[0] = pHexStr[i];
+ tmp[1] = pHexStr[i+1];
+ tmp[2] = '\0';
+ byte = (MV_U8) (strtol(tmp, NULL, 16) & 0xFF);
+ pBin[j] = byte;
+ }
+}
+
+void mvAsciiToHex(const char* asciiStr, char* hexStr)
+{
+ int i=0;
+
+ while(asciiStr[i] != 0)
+ {
+ mvOsSPrintf(&hexStr[i*2], "%02x", asciiStr[i]);
+ i++;
+ }
+ hexStr[i*2] = 0;
+}
+
+
+void mvBinToHex(const MV_U8* bin, char* hexStr, int size)
+{
+ int i;
+
+ for(i=0; i<size; i++)
+ {
+ mvOsSPrintf(&hexStr[i*2], "%02x", bin[i]);
+ }
+ hexStr[i*2] = '\0';
+}
+
+void mvBinToAscii(const MV_U8* bin, char* asciiStr, int size)
+{
+ int i;
+
+ for(i=0; i<size; i++)
+ {
+ mvOsSPrintf(&asciiStr[i*2], "%c", bin[i]);
+ }
+ asciiStr[i*2] = '\0';
+}
+
+/*******************************************************************************
+* mvLog2 -
+*
+* DESCRIPTION:
+* Calculate the Log2 of a given number.
+*
+* INPUT:
+* num - A number to calculate the Log2 for.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Log 2 of the input number, or 0xFFFFFFFF if input is 0.
+*
+*******************************************************************************/
+MV_U32 mvLog2(MV_U32 num)
+{
+ MV_U32 result = 0;
+ if(num == 0)
+ return 0xFFFFFFFF;
+ while(num != 1)
+ {
+ num = num >> 1;
+ result++;
+ }
+ return result;
+}
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+
+#ifndef __INCmvCommonh
+#define __INCmvCommonh
+
+#include "mvTypes.h"
+
+/* Swap tool */
+
+/* 16bit nibble swap. For example 0x1234 -> 0x2143 */
+#define MV_NIBBLE_SWAP_16BIT(X) (((X&0xf) << 4) | \
+ ((X&0xf0) >> 4) | \
+ ((X&0xf00) << 4) | \
+ ((X&0xf000) >> 4))
+
+/* 32bit nibble swap. For example 0x12345678 -> 0x21436587 */
+#define MV_NIBBLE_SWAP_32BIT(X) (((X&0xf) << 4) | \
+ ((X&0xf0) >> 4) | \
+ ((X&0xf00) << 4) | \
+ ((X&0xf000) >> 4) | \
+ ((X&0xf0000) << 4) | \
+ ((X&0xf00000) >> 4) | \
+ ((X&0xf000000) << 4) | \
+ ((X&0xf0000000) >> 4))
+
+/* 16bit byte swap. For example 0x1122 -> 0x2211 */
+#define MV_BYTE_SWAP_16BIT(X) ((((X)&0xff)<<8) | (((X)&0xff00)>>8))
+
+/* 32bit byte swap. For example 0x11223344 -> 0x44332211 */
+#define MV_BYTE_SWAP_32BIT(X) ((((X)&0xff)<<24) | \
+ (((X)&0xff00)<<8) | \
+ (((X)&0xff0000)>>8) | \
+ (((X)&0xff000000)>>24))
+
+/* 64bit byte swap. For example 0x11223344.55667788 -> 0x88776655.44332211 */
+#define MV_BYTE_SWAP_64BIT(X) ((l64) ((((X)&0xffULL)<<56) | \
+ (((X)&0xff00ULL)<<40) | \
+ (((X)&0xff0000ULL)<<24) | \
+ (((X)&0xff000000ULL)<<8) | \
+ (((X)&0xff00000000ULL)>>8) | \
+ (((X)&0xff0000000000ULL)>>24) | \
+ (((X)&0xff000000000000ULL)>>40) | \
+ (((X)&0xff00000000000000ULL)>>56)))
+
+/* Endianess macros. */
+#if defined(MV_CPU_LE)
+ #define MV_16BIT_LE(X) (X)
+ #define MV_32BIT_LE(X) (X)
+ #define MV_64BIT_LE(X) (X)
+ #define MV_16BIT_BE(X) MV_BYTE_SWAP_16BIT(X)
+ #define MV_32BIT_BE(X) MV_BYTE_SWAP_32BIT(X)
+ #define MV_64BIT_BE(X) MV_BYTE_SWAP_64BIT(X)
+#elif defined(MV_CPU_BE)
+ #define MV_16BIT_LE(X) MV_BYTE_SWAP_16BIT(X)
+ #define MV_32BIT_LE(X) MV_BYTE_SWAP_32BIT(X)
+ #define MV_64BIT_LE(X) MV_BYTE_SWAP_64BIT(X)
+ #define MV_16BIT_BE(X) (X)
+ #define MV_32BIT_BE(X) (X)
+ #define MV_64BIT_BE(X) (X)
+#else
+ #error "CPU endianess isn't defined!\n"
+#endif
+
+
+/* Bit field definitions */
+#define NO_BIT 0x00000000
+#define BIT0 0x00000001
+#define BIT1 0x00000002
+#define BIT2 0x00000004
+#define BIT3 0x00000008
+#define BIT4 0x00000010
+#define BIT5 0x00000020
+#define BIT6 0x00000040
+#define BIT7 0x00000080
+#define BIT8 0x00000100
+#define BIT9 0x00000200
+#define BIT10 0x00000400
+#define BIT11 0x00000800
+#define BIT12 0x00001000
+#define BIT13 0x00002000
+#define BIT14 0x00004000
+#define BIT15 0x00008000
+#define BIT16 0x00010000
+#define BIT17 0x00020000
+#define BIT18 0x00040000
+#define BIT19 0x00080000
+#define BIT20 0x00100000
+#define BIT21 0x00200000
+#define BIT22 0x00400000
+#define BIT23 0x00800000
+#define BIT24 0x01000000
+#define BIT25 0x02000000
+#define BIT26 0x04000000
+#define BIT27 0x08000000
+#define BIT28 0x10000000
+#define BIT29 0x20000000
+#define BIT30 0x40000000
+#define BIT31 0x80000000
+
+/* Handy sizes */
+#define _1K 0x00000400
+#define _2K 0x00000800
+#define _4K 0x00001000
+#define _8K 0x00002000
+#define _16K 0x00004000
+#define _32K 0x00008000
+#define _64K 0x00010000
+#define _128K 0x00020000
+#define _256K 0x00040000
+#define _512K 0x00080000
+
+#define _1M 0x00100000
+#define _2M 0x00200000
+#define _4M 0x00400000
+#define _8M 0x00800000
+#define _16M 0x01000000
+#define _32M 0x02000000
+#define _64M 0x04000000
+#define _128M 0x08000000
+#define _256M 0x10000000
+#define _512M 0x20000000
+
+#define _1G 0x40000000
+#define _2G 0x80000000
+
+/* Tclock and Sys clock define */
+#define _100MHz 100000000
+#define _125MHz 125000000
+#define _133MHz 133333334
+#define _150MHz 150000000
+#define _160MHz 160000000
+#define _166MHz 166666667
+#define _175MHz 175000000
+#define _178MHz 178000000
+#define _183MHz 183333334
+#define _187MHz 187000000
+#define _192MHz 192000000
+#define _194MHz 194000000
+#define _200MHz 200000000
+#define _233MHz 233333334
+#define _250MHz 250000000
+#define _266MHz 266666667
+#define _300MHz 300000000
+
+/* For better address window table readability */
+#define EN MV_TRUE
+#define DIS MV_FALSE
+#define N_A -1 /* Not applicable */
+
+/* Cache configuration options for memory (DRAM, SRAM, ... ) */
+
+/* Memory uncached, HW or SW cache coherency is not needed */
+#define MV_UNCACHED 0
+/* Memory cached, HW cache coherency supported in WriteThrough mode */
+#define MV_CACHE_COHER_HW_WT 1
+/* Memory cached, HW cache coherency supported in WriteBack mode */
+#define MV_CACHE_COHER_HW_WB 2
+/* Memory cached, No HW cache coherency, Cache coherency must be in SW */
+#define MV_CACHE_COHER_SW 3
+
+
+/* Macro for testing aligment. Positive if number is NOT aligned */
+#define MV_IS_NOT_ALIGN(number, align) ((number) & ((align) - 1))
+
+/* Macro for alignment up. For example, MV_ALIGN_UP(0x0330, 0x20) = 0x0340 */
+#define MV_ALIGN_UP(number, align) \
+(((number) & ((align) - 1)) ? (((number) + (align)) & ~((align)-1)) : (number))
+
+/* Macro for alignment down. For example, MV_ALIGN_UP(0x0330, 0x20) = 0x0320 */
+#define MV_ALIGN_DOWN(number, align) ((number) & ~((align)-1))
+
+/* This macro returns absolute value */
+#define MV_ABS(number) (((int)(number) < 0) ? -(int)(number) : (int)(number))
+
+
+/* Bit fields manipulation macros */
+
+/* An integer word which its 'x' bit is set */
+#define MV_BIT_MASK(bitNum) (1 << (bitNum) )
+
+/* Checks wheter bit 'x' in integer word is set */
+#define MV_BIT_CHECK(word, bitNum) ( (word) & MV_BIT_MASK(bitNum) )
+
+/* Clear (reset) bit 'x' in integer word (RMW - Read-Modify-Write) */
+#define MV_BIT_CLEAR(word, bitNum) ( (word) &= ~(MV_BIT_MASK(bitNum)) )
+
+/* Set bit 'x' in integer word (RMW) */
+#define MV_BIT_SET(word, bitNum) ( (word) |= MV_BIT_MASK(bitNum) )
+
+/* Invert bit 'x' in integer word (RMW) */
+#define MV_BIT_INV(word, bitNum) ( (word) ^= MV_BIT_MASK(bitNum) )
+
+/* Get the min between 'a' or 'b' */
+#define MV_MIN(a,b) (((a) < (b)) ? (a) : (b))
+
+/* Get the max between 'a' or 'b' */
+#define MV_MAX(a,b) (((a) < (b)) ? (b) : (a))
+
+/* Temporary */
+#define mvOsDivide(num, div) \
+({ \
+ int i=0, rem=(num); \
+ \
+ while(rem >= (div)) \
+ { \
+ rem -= (div); \
+ i++; \
+ } \
+ (i); \
+})
+
+/* Temporary */
+#define mvOsReminder(num, div) \
+({ \
+ int rem = (num); \
+ \
+ while(rem >= (div)) \
+ rem -= (div); \
+ (rem); \
+})
+
+#define MV_IP_QUAD(ipAddr) ((ipAddr >> 24) & 0xFF), ((ipAddr >> 16) & 0xFF), \
+ ((ipAddr >> 8) & 0xFF), ((ipAddr >> 0) & 0xFF)
+
+#define MV_IS_POWER_OF_2(num) ((num != 0) && ((num & (num - 1)) == 0))
+
+#ifndef MV_ASMLANGUAGE
+/* mvCommon API list */
+
+MV_VOID mvHexToBin(const char* pHexStr, MV_U8* pBin, int size);
+void mvAsciiToHex(const char* asciiStr, char* hexStr);
+void mvBinToHex(const MV_U8* bin, char* hexStr, int size);
+void mvBinToAscii(const MV_U8* bin, char* asciiStr, int size);
+
+MV_STATUS mvMacStrToHex(const char* macStr, MV_U8* macHex);
+MV_STATUS mvMacHexToStr(MV_U8* macHex, char* macStr);
+void mvSizePrint(MV_U32);
+
+MV_U32 mvLog2(MV_U32 num);
+
+#endif /* MV_ASMLANGUAGE */
+
+
+#endif /* __INCmvCommonh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+
+/* includes */
+#include "mvOs.h"
+#include "mv802_3.h"
+#include "mvCommon.h"
+#include "mvDebug.h"
+
+/* Global variables effect on behave MV_DEBUG_PRINT and MV_DEBUG_CODE macros
+ * mvDebug - map of bits (one for each module) bit=1 means enable
+ * debug code and messages for this module
+ * mvModuleDebug - array of 32 bits varables one for each module
+ */
+MV_U32 mvDebug = 0;
+MV_U32 mvDebugModules[MV_MODULE_MAX];
+
+/* Init mvModuleDebug array to default values */
+void mvDebugInit(void)
+{
+ int bit;
+
+ mvDebug = 0;
+ for(bit=0; bit<MV_MODULE_MAX; bit++)
+ {
+ mvDebugModules[bit] = MV_DEBUG_FLAG_ERR | MV_DEBUG_FLAG_STATS;
+ mvDebug |= MV_BIT_MASK(bit);
+ }
+}
+
+void mvDebugModuleEnable(MV_MODULE_ID module, MV_BOOL isEnable)
+{
+ if (isEnable)
+ {
+ MV_BIT_SET(mvDebug, module);
+ }
+ else
+ MV_BIT_CLEAR(mvDebug, module);
+}
+
+void mvDebugModuleSetFlags(MV_MODULE_ID module, MV_U32 flags)
+{
+ mvDebugModules[module] |= flags;
+}
+
+void mvDebugModuleClearFlags(MV_MODULE_ID module, MV_U32 flags)
+{
+ mvDebugModules[module] &= ~flags;
+}
+
+/* Dump memory in specific format:
+ * address: X1X1X1X1 X2X2X2X2 ... X8X8X8X8
+ */
+void mvDebugMemDump(void* addr, int size, int access)
+{
+ int i, j;
+ MV_U32 memAddr = (MV_U32)addr;
+
+ if(access == 0)
+ access = 1;
+
+ if( (access != 4) && (access != 2) && (access != 1) )
+ {
+ mvOsPrintf("%d wrong access size. Access must be 1 or 2 or 4\n",
+ access);
+ return;
+ }
+ memAddr = MV_ALIGN_DOWN( (unsigned int)addr, 4);
+ size = MV_ALIGN_UP(size, 4);
+ addr = (void*)MV_ALIGN_DOWN( (unsigned int)addr, access);
+ while(size > 0)
+ {
+ mvOsPrintf("%08x: ", memAddr);
+ i = 0;
+ /* 32 bytes in the line */
+ while(i < 32)
+ {
+ if(memAddr >= (MV_U32)addr)
+ {
+ switch(access)
+ {
+ case 1:
+ if( memAddr == CPU_PHY_MEM(memAddr) )
+ {
+ mvOsPrintf("%02x ", MV_MEMIO8_READ(memAddr));
+ }
+ else
+ {
+ mvOsPrintf("%02x ", *((MV_U8*)memAddr));
+ }
+ break;
+
+ case 2:
+ if( memAddr == CPU_PHY_MEM(memAddr) )
+ {
+ mvOsPrintf("%04x ", MV_MEMIO16_READ(memAddr));
+ }
+ else
+ {
+ mvOsPrintf("%04x ", *((MV_U16*)memAddr));
+ }
+ break;
+
+ case 4:
+ if( memAddr == CPU_PHY_MEM(memAddr) )
+ {
+ mvOsPrintf("%08x ", MV_MEMIO32_READ(memAddr));
+ }
+ else
+ {
+ mvOsPrintf("%08x ", *((MV_U32*)memAddr));
+ }
+ break;
+ }
+ }
+ else
+ {
+ for(j=0; j<(access*2+1); j++)
+ mvOsPrintf(" ");
+ }
+ i += access;
+ memAddr += access;
+ size -= access;
+ if(size <= 0)
+ break;
+ }
+ mvOsPrintf("\n");
+ }
+}
+
+void mvDebugPrintBufInfo(BUF_INFO* pBufInfo, int size, int access)
+{
+ if(pBufInfo == NULL)
+ {
+ mvOsPrintf("\n!!! pBufInfo = NULL\n");
+ return;
+ }
+ mvOsPrintf("\n*** pBufInfo=0x%x, cmdSts=0x%08x, pBuf=0x%x, bufSize=%d\n",
+ (unsigned int)pBufInfo,
+ (unsigned int)pBufInfo->cmdSts,
+ (unsigned int)pBufInfo->pBuff,
+ (unsigned int)pBufInfo->bufSize);
+ mvOsPrintf("pData=0x%x, byteCnt=%d, pNext=0x%x, uInfo1=0x%x, uInfo2=0x%x\n",
+ (unsigned int)pBufInfo->pData,
+ (unsigned int)pBufInfo->byteCnt,
+ (unsigned int)pBufInfo->pNextBufInfo,
+ (unsigned int)pBufInfo->userInfo1,
+ (unsigned int)pBufInfo->userInfo2);
+ if(pBufInfo->pData != NULL)
+ {
+ if(size > pBufInfo->byteCnt)
+ size = pBufInfo->byteCnt;
+ mvDebugMemDump(pBufInfo->pData, size, access);
+ }
+}
+
+void mvDebugPrintPktInfo(MV_PKT_INFO* pPktInfo, int size, int access)
+{
+ int frag, len;
+
+ if(pPktInfo == NULL)
+ {
+ mvOsPrintf("\n!!! pPktInfo = NULL\n");
+ return;
+ }
+ mvOsPrintf("\npPkt=%p, stat=0x%08x, numFr=%d, size=%d, pFr=%p, osInfo=0x%lx\n",
+ pPktInfo, pPktInfo->status, pPktInfo->numFrags, pPktInfo->pktSize,
+ pPktInfo->pFrags, pPktInfo->osInfo);
+
+ for(frag=0; frag<pPktInfo->numFrags; frag++)
+ {
+ mvOsPrintf("#%2d. bufVirt=%p, bufSize=%d\n",
+ frag, pPktInfo->pFrags[frag].bufVirtPtr,
+ pPktInfo->pFrags[frag].bufSize);
+ if(size > 0)
+ {
+ len = MV_MIN((int)pPktInfo->pFrags[frag].bufSize, size);
+ mvDebugMemDump(pPktInfo->pFrags[frag].bufVirtPtr, len, access);
+ size -= len;
+ }
+ }
+
+}
+
+void mvDebugPrintIpAddr(MV_U32 ipAddr)
+{
+ mvOsPrintf("%d.%d.%d.%d", ((ipAddr >> 24) & 0xFF), ((ipAddr >> 16) & 0xFF),
+ ((ipAddr >> 8) & 0xFF), ((ipAddr >> 0) & 0xFF));
+}
+
+void mvDebugPrintMacAddr(const MV_U8* pMacAddr)
+{
+ int i;
+
+ mvOsPrintf("%02x", (unsigned int)pMacAddr[0]);
+ for(i=1; i<MV_MAC_ADDR_SIZE; i++)
+ {
+ mvOsPrintf(":%02x", pMacAddr[i]);
+ }
+ /* mvOsPrintf("\n");*/
+}
+
+
+/******* There are three functions deals with MV_DEBUG_TIMES structure ********/
+
+/* Reset MV_DEBUG_TIMES entry */
+void mvDebugResetTimeEntry(MV_DEBUG_TIMES* pTimeEntry, int count, char* pName)
+{
+ pTimeEntry->begin = 0;
+ pTimeEntry->count = count;
+ pTimeEntry->end = 0;
+ pTimeEntry->left = pTimeEntry->count;
+ pTimeEntry->total = 0;
+ pTimeEntry->min = 0xFFFFFFFF;
+ pTimeEntry->max = 0x0;
+ strncpy(pTimeEntry->name, pName, sizeof(pTimeEntry->name)-1);
+ pTimeEntry->name[sizeof(pTimeEntry->name)-1] = '\0';
+}
+
+/* Print out MV_DEBUG_TIMES entry */
+void mvDebugPrintTimeEntry(MV_DEBUG_TIMES* pTimeEntry, MV_BOOL isTitle)
+{
+ int num;
+
+ if(isTitle == MV_TRUE)
+ mvOsPrintf("Event NumOfEvents TotalTime Average Min Max\n");
+
+ num = pTimeEntry->count-pTimeEntry->left;
+ if(num > 0)
+ {
+ mvOsPrintf("%-11s %6u 0x%08lx %6lu %6lu %6lu\n",
+ pTimeEntry->name, num, pTimeEntry->total, pTimeEntry->total/num,
+ pTimeEntry->min, pTimeEntry->max);
+ }
+}
+
+/* Update MV_DEBUG_TIMES entry */
+void mvDebugUpdateTimeEntry(MV_DEBUG_TIMES* pTimeEntry)
+{
+ MV_U32 delta;
+
+ if(pTimeEntry->left > 0)
+ {
+ if(pTimeEntry->end <= pTimeEntry->begin)
+ {
+ delta = pTimeEntry->begin - pTimeEntry->end;
+ }
+ else
+ {
+ delta = ((MV_U32)0x10000 - pTimeEntry->end) + pTimeEntry->begin;
+ }
+ pTimeEntry->total += delta;
+
+ if(delta < pTimeEntry->min)
+ pTimeEntry->min = delta;
+
+ if(delta > pTimeEntry->max)
+ pTimeEntry->max = delta;
+
+ pTimeEntry->left--;
+ }
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+
+#ifndef __INCmvDebugh
+#define __INCmvDebugh
+
+/* includes */
+#include "mvTypes.h"
+
+typedef enum
+{
+ MV_MODULE_INVALID = -1,
+ MV_MODULE_ETH = 0,
+ MV_MODULE_IDMA,
+ MV_MODULE_XOR,
+ MV_MODULE_TWASI,
+ MV_MODULE_MGI,
+ MV_MODULE_USB,
+ MV_MODULE_CESA,
+
+ MV_MODULE_MAX
+}MV_MODULE_ID;
+
+/* Define generic flags useful for most of modules */
+#define MV_DEBUG_FLAG_ALL (0)
+#define MV_DEBUG_FLAG_INIT (1 << 0)
+#define MV_DEBUG_FLAG_RX (1 << 1)
+#define MV_DEBUG_FLAG_TX (1 << 2)
+#define MV_DEBUG_FLAG_ERR (1 << 3)
+#define MV_DEBUG_FLAG_TRACE (1 << 4)
+#define MV_DEBUG_FLAG_DUMP (1 << 5)
+#define MV_DEBUG_FLAG_CACHE (1 << 6)
+#define MV_DEBUG_FLAG_IOCTL (1 << 7)
+#define MV_DEBUG_FLAG_STATS (1 << 8)
+
+extern MV_U32 mvDebug;
+extern MV_U32 mvDebugModules[MV_MODULE_MAX];
+
+#ifdef MV_DEBUG
+# define MV_DEBUG_PRINT(module, flags, msg) mvOsPrintf msg
+# define MV_DEBUG_CODE(module, flags, code) code
+#elif defined(MV_RT_DEBUG)
+# define MV_DEBUG_PRINT(module, flags, msg) \
+ if( (mvDebug & (1<<(module))) && \
+ ((mvDebugModules[(module)] & (flags)) == (flags)) ) \
+ mvOsPrintf msg
+# define MV_DEBUG_CODE(module, flags, code) \
+ if( (mvDebug & (1<<(module))) && \
+ ((mvDebugModules[(module)] & (flags)) == (flags)) ) \
+ code
+#else
+# define MV_DEBUG_PRINT(module, flags, msg)
+# define MV_DEBUG_CODE(module, flags, code)
+#endif
+
+
+
+/* typedefs */
+
+/* time measurement structure used to check how much time pass between
+ * two points
+ */
+typedef struct {
+ char name[20]; /* name of the entry */
+ unsigned long begin; /* time measured on begin point */
+ unsigned long end; /* time measured on end point */
+ unsigned long total; /* Accumulated time */
+ unsigned long left; /* The rest measurement actions */
+ unsigned long count; /* Maximum measurement actions */
+ unsigned long min; /* Minimum time from begin to end */
+ unsigned long max; /* Maximum time from begin to end */
+} MV_DEBUG_TIMES;
+
+
+/* mvDebug.h API list */
+
+/****** Error Recording ******/
+
+/* Dump memory in specific format:
+ * address: X1X1X1X1 X2X2X2X2 ... X8X8X8X8
+ */
+void mvDebugMemDump(void* addr, int size, int access);
+
+void mvDebugPrintBufInfo(BUF_INFO* pBufInfo, int size, int access);
+
+void mvDebugPrintPktInfo(MV_PKT_INFO* pPktInfo, int size, int access);
+
+void mvDebugPrintIpAddr(MV_U32 ipAddr);
+
+void mvDebugPrintMacAddr(const MV_U8* pMacAddr);
+
+/**** There are three functions deals with MV_DEBUG_TIMES structure ****/
+
+/* Reset MV_DEBUG_TIMES entry */
+void mvDebugResetTimeEntry(MV_DEBUG_TIMES* pTimeEntry, int count, char* name);
+
+/* Update MV_DEBUG_TIMES entry */
+void mvDebugUpdateTimeEntry(MV_DEBUG_TIMES* pTimeEntry);
+
+/* Print out MV_DEBUG_TIMES entry */
+void mvDebugPrintTimeEntry(MV_DEBUG_TIMES* pTimeEntry, MV_BOOL isTitle);
+
+
+/******** General ***********/
+
+/* Change value of mvDebugPrint global variable */
+
+void mvDebugInit(void);
+void mvDebugModuleEnable(MV_MODULE_ID module, MV_BOOL isEnable);
+void mvDebugModuleSetFlags(MV_MODULE_ID module, MV_U32 flags);
+void mvDebugModuleClearFlags(MV_MODULE_ID module, MV_U32 flags);
+
+
+#endif /* __INCmvDebug.h */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDeviceIdh
+#define __INCmvDeviceIdh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines */
+#define MARVELL_VEN_ID 0x11ab
+
+/* Disco-3 */
+#define MV64460_DEV_ID 0x6480
+#define MV64460B_DEV_ID 0x6485
+#define MV64430_DEV_ID 0x6420
+
+/* Disco-5 */
+#define MV64560_DEV_ID 0x6450
+
+/* Disco-6 */
+#define MV64660_DEV_ID 0x6460
+
+/* Orion */
+#define MV_1181_DEV_ID 0x1181
+#define MV_5181_DEV_ID 0x5181
+#define MV_5281_DEV_ID 0x5281
+#define MV_5182_DEV_ID 0x5182
+#define MV_8660_DEV_ID 0x8660
+#define MV_5180_DEV_ID 0x5180
+#define MV_5082_DEV_ID 0x5082
+#define MV_1281_DEV_ID 0x1281
+#define MV_6082_DEV_ID 0x6082
+#define MV_6183_DEV_ID 0x6183
+#define MV_6183L_DEV_ID 0x6083
+
+#define MV_5281_D0_REV 0x4
+#define MV_5281_D0_ID ((MV_5281_DEV_ID << 16) | MV_5281_D0_REV)
+#define MV_5281_D0_NAME "88F5281 D0"
+
+#define MV_5281_D1_REV 0x5
+#define MV_5281_D1_ID ((MV_5281_DEV_ID << 16) | MV_5281_D1_REV)
+#define MV_5281_D1_NAME "88F5281 D1"
+
+#define MV_5281_D2_REV 0x6
+#define MV_5281_D2_ID ((MV_5281_DEV_ID << 16) | MV_5281_D2_REV)
+#define MV_5281_D2_NAME "88F5281 D2"
+
+
+#define MV_5181L_A0_REV 0x8 /* need for PCIE Er */
+#define MV_5181_A1_REV 0x1 /* for USB Er ..*/
+#define MV_5181_B0_REV 0x2
+#define MV_5181_B1_REV 0x3
+#define MV_5182_A1_REV 0x1
+#define MV_5180N_B1_REV 0x3
+#define MV_5181L_A0_ID ((MV_5181_DEV_ID << 16) | MV_5181L_A0_REV)
+
+
+
+/* kw */
+#define MV_6281_DEV_ID 0x6281
+#define MV_6192_DEV_ID 0x6192
+#define MV_6190_DEV_ID 0x6190
+#define MV_6180_DEV_ID 0x6180
+
+#define MV_6281_A0_REV 0x2
+#define MV_6281_A0_ID ((MV_6281_DEV_ID << 16) | MV_6281_A0_REV)
+#define MV_6281_A0_NAME "88F6281 A0"
+
+#define MV_6192_A0_REV 0x2
+#define MV_6192_A0_ID ((MV_6192_DEV_ID << 16) | MV_6192_A0_REV)
+#define MV_6192_A0_NAME "88F6192 A0"
+
+#define MV_6190_A0_REV 0x2
+#define MV_6190_A0_ID ((MV_6190_DEV_ID << 16) | MV_6190_A0_REV)
+#define MV_6190_A0_NAME "88F6190 A0"
+
+#define MV_6180_A0_REV 0x2
+#define MV_6180_A0_ID ((MV_6180_DEV_ID << 16) | MV_6180_A0_REV)
+#define MV_6180_A0_NAME "88F6180 A0"
+
+#define MV_6281_A1_REV 0x3
+#define MV_6281_A1_ID ((MV_6281_DEV_ID << 16) | MV_6281_A1_REV)
+#define MV_6281_A1_NAME "88F6281 A1"
+
+#define MV_6192_A1_REV 0x3
+#define MV_6192_A1_ID ((MV_6192_DEV_ID << 16) | MV_6192_A1_REV)
+#define MV_6192_A1_NAME "88F6192 A1"
+
+#define MV_6190_A1_REV 0x3
+#define MV_6190_A1_ID ((MV_6190_DEV_ID << 16) | MV_6190_A1_REV)
+#define MV_6190_A1_NAME "88F6190 A1"
+
+#define MV_6180_A1_REV 0x3
+#define MV_6180_A1_ID ((MV_6180_DEV_ID << 16) | MV_6180_A1_REV)
+#define MV_6180_A1_NAME "88F6180 A1"
+
+#define MV_88F6XXX_A0_REV 0x2
+#define MV_88F6XXX_A1_REV 0x3
+/* Disco-Duo */
+#define MV_78XX0_ZY_DEV_ID 0x6381
+#define MV_78XX0_ZY_NAME "MV78X00"
+
+#define MV_78XX0_Z0_REV 0x1
+#define MV_78XX0_Z0_ID ((MV_78XX0_ZY_DEV_ID << 16) | MV_78XX0_Z0_REV)
+#define MV_78XX0_Z0_NAME "78X00 Z0"
+
+#define MV_78XX0_Y0_REV 0x2
+#define MV_78XX0_Y0_ID ((MV_78XX0_ZY_DEV_ID << 16) | MV_78XX0_Y0_REV)
+#define MV_78XX0_Y0_NAME "78X00 Y0"
+
+#define MV_78XX0_DEV_ID 0x7800
+#define MV_78XX0_NAME "MV78X00"
+
+#define MV_76100_DEV_ID 0x7610
+#define MV_78200_DEV_ID 0x7820
+#define MV_78100_DEV_ID 0x7810
+#define MV_78XX0_A0_REV 0x1
+#define MV_78XX0_A1_REV 0x2
+
+#define MV_76100_NAME "MV76100"
+#define MV_78100_NAME "MV78100"
+#define MV_78200_NAME "MV78200"
+
+#define MV_76100_A0_ID ((MV_76100_DEV_ID << 16) | MV_78XX0_A0_REV)
+#define MV_78100_A0_ID ((MV_78100_DEV_ID << 16) | MV_78XX0_A0_REV)
+#define MV_78200_A0_ID ((MV_78200_DEV_ID << 16) | MV_78XX0_A0_REV)
+
+#define MV_76100_A1_ID ((MV_76100_DEV_ID << 16) | MV_78XX0_A1_REV)
+#define MV_78100_A1_ID ((MV_78100_DEV_ID << 16) | MV_78XX0_A1_REV)
+#define MV_78200_A1_ID ((MV_78200_DEV_ID << 16) | MV_78XX0_A1_REV)
+
+#define MV_76100_A0_NAME "MV76100 A0"
+#define MV_78100_A0_NAME "MV78100 A0"
+#define MV_78200_A0_NAME "MV78200 A0"
+#define MV_78XX0_A0_NAME "MV78XX0 A0"
+
+#define MV_76100_A1_NAME "MV76100 A1"
+#define MV_78100_A1_NAME "MV78100 A1"
+#define MV_78200_A1_NAME "MV78200 A1"
+#define MV_78XX0_A1_NAME "MV78XX0 A1"
+
+/*MV88F632X family*/
+#define MV_6321_DEV_ID 0x6321
+#define MV_6322_DEV_ID 0x6322
+#define MV_6323_DEV_ID 0x6323
+
+#define MV_6321_NAME "88F6321"
+#define MV_6322_NAME "88F6322"
+#define MV_6323_NAME "88F6323"
+
+#define MV_632X_A1_REV 0x2
+
+#define MV_6321_A1_ID ((MV_6321_DEV_ID << 16) | MV_632X_A1_REV)
+#define MV_6322_A1_ID ((MV_6322_DEV_ID << 16) | MV_632X_A1_REV)
+#define MV_6323_A1_ID ((MV_6323_DEV_ID << 16) | MV_632X_A1_REV)
+
+#define MV_6321_A1_NAME "88F6321 A1"
+#define MV_6322_A1_NAME "88F6322 A1"
+#define MV_6323_A1_NAME "88F6323 A1"
+
+
+#endif /* __INCmvDeviceIdh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvHalVerh
+#define __INCmvHalVerh
+
+/* Defines */
+#define MV_HAL_VERSION "FEROCEON_HAL_3_1_7"
+#define MV_RELEASE_BASELINE "SoCandControllers_FEROCEON_RELEASE_7_9_2009_KW_4_3_4_DD_2_1_4_6183_1_1_4"
+
+#endif /* __INCmvHalVerh */
\ No newline at end of file
--- /dev/null
+/*******************************************************************************
+* Copyright 2003, Marvell Semiconductor Israel LTD. *
+* THIS CODE CONTAINS CONFIDENTIAL INFORMATION OF MARVELL. *
+* NO RIGHTS ARE GRANTED HEREIN UNDER ANY PATENT, MASK WORK RIGHT OR COPYRIGHT *
+* OF MARVELL OR ANY THIRD PARTY. MARVELL RESERVES THE RIGHT AT ITS SOLE *
+* DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL. *
+* THIS CODE IS PROVIDED "AS IS". MARVELL MAKES NO WARRANTIES, EXPRESSED, *
+* IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS OR PERFORMANCE. *
+* *
+* MARVELL COMPRISES MARVELL TECHNOLOGY GROUP LTD. (MTGL) AND ITS SUBSIDIARIES, *
+* MARVELL INTERNATIONAL LTD. (MIL), MARVELL TECHNOLOGY, INC. (MTI), MARVELL *
+* SEMICONDUCTOR, INC. (MSI), MARVELL ASIA PTE LTD. (MAPL), MARVELL JAPAN K.K. *
+* (MJKK), MARVELL SEMICONDUCTOR ISRAEL LTD (MSIL). *
+********************************************************************************
+* mvQueue.c
+*
+* FILENAME: $Workfile: mvStack.c $
+* REVISION: $Revision: 1.1 $
+* LAST UPDATE: $Modtime: $
+*
+* DESCRIPTION:
+* This file implements simple Stack LIFO functionality.
+*******************************************************************************/
+
+/* includes */
+#include "mvOs.h"
+#include "mvTypes.h"
+#include "mvDebug.h"
+#include "mvStack.h"
+
+/* defines */
+
+
+/* Public functions */
+
+
+/* Purpose: Create new stack
+ * Inputs:
+ * - MV_U32 noOfElements - maximum number of elements in the stack.
+ * Each element 4 bytes size
+ * Return: void* - pointer to created stack.
+ */
+void* mvStackCreate(int numOfElements)
+{
+ MV_STACK* pStack;
+ MV_U32* pStackElements;
+
+ pStack = (MV_STACK*)mvOsMalloc(sizeof(MV_STACK));
+ pStackElements = (MV_U32*)mvOsMalloc(numOfElements*sizeof(MV_U32));
+ if( (pStack == NULL) || (pStackElements == NULL) )
+ {
+ mvOsPrintf("mvStack: Can't create new stack\n");
+ return NULL;
+ }
+ memset(pStackElements, 0, numOfElements*sizeof(MV_U32));
+ pStack->numOfElements = numOfElements;
+ pStack->stackIdx = 0;
+ pStack->stackElements = pStackElements;
+
+ return pStack;
+}
+
+/* Purpose: Delete existing stack
+ * Inputs:
+ * - void* stackHndl - Stack handle as returned by "mvStackCreate()" function
+ *
+ * Return: MV_STATUS MV_NOT_FOUND - Failure. StackHandle is not valid.
+ * MV_OK - Success.
+ */
+MV_STATUS mvStackDelete(void* stackHndl)
+{
+ MV_STACK* pStack = (MV_STACK*)stackHndl;
+
+ if( (pStack == NULL) || (pStack->stackElements == NULL) )
+ return MV_NOT_FOUND;
+
+ mvOsFree(pStack->stackElements);
+ mvOsFree(pStack);
+
+ return MV_OK;
+}
+
+
+/* PrintOut status of the stack */
+void mvStackStatus(void* stackHndl, MV_BOOL isPrintElements)
+{
+ int i;
+ MV_STACK* pStack = (MV_STACK*)stackHndl;
+
+ mvOsPrintf("StackHandle=%p, pElements=%p, numElements=%d, stackIdx=%d\n",
+ stackHndl, pStack->stackElements, pStack->numOfElements,
+ pStack->stackIdx);
+ if(isPrintElements == MV_TRUE)
+ {
+ for(i=0; i<pStack->stackIdx; i++)
+ {
+ mvOsPrintf("%3d. Value=0x%x\n", i, pStack->stackElements[i]);
+ }
+ }
+}
--- /dev/null
+/*******************************************************************************
+* Copyright 2003, Marvell Semiconductor Israel LTD. *
+* THIS CODE CONTAINS CONFIDENTIAL INFORMATION OF MARVELL. *
+* NO RIGHTS ARE GRANTED HEREIN UNDER ANY PATENT, MASK WORK RIGHT OR COPYRIGHT *
+* OF MARVELL OR ANY THIRD PARTY. MARVELL RESERVES THE RIGHT AT ITS SOLE *
+* DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL. *
+* THIS CODE IS PROVIDED "AS IS". MARVELL MAKES NO WARRANTIES, EXPRESSED, *
+* IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS OR PERFORMANCE. *
+* *
+* MARVELL COMPRISES MARVELL TECHNOLOGY GROUP LTD. (MTGL) AND ITS SUBSIDIARIES, *
+* MARVELL INTERNATIONAL LTD. (MIL), MARVELL TECHNOLOGY, INC. (MTI), MARVELL *
+* SEMICONDUCTOR, INC. (MSI), MARVELL ASIA PTE LTD. (MAPL), MARVELL JAPAN K.K. *
+* (MJKK), MARVELL SEMICONDUCTOR ISRAEL LTD (MSIL). *
+********************************************************************************
+* mvStack.h - Header File for :
+*
+* FILENAME: $Workfile: mvStack.h $
+* REVISION: $Revision: 1.1 $
+* LAST UPDATE: $Modtime: $
+*
+* DESCRIPTION:
+* This file defines simple Stack (LIFO) functionality.
+*
+*******************************************************************************/
+
+#ifndef __mvStack_h__
+#define __mvStack_h__
+
+
+/* includes */
+#include "mvTypes.h"
+
+
+/* defines */
+
+
+/* typedefs */
+/* Data structure describes general purpose Stack */
+typedef struct
+{
+ int stackIdx;
+ int numOfElements;
+ MV_U32* stackElements;
+} MV_STACK;
+
+static INLINE MV_BOOL mvStackIsFull(void* stackHndl)
+{
+ MV_STACK* pStack = (MV_STACK*)stackHndl;
+
+ if(pStack->stackIdx == pStack->numOfElements)
+ return MV_TRUE;
+
+ return MV_FALSE;
+}
+
+static INLINE MV_BOOL mvStackIsEmpty(void* stackHndl)
+{
+ MV_STACK* pStack = (MV_STACK*)stackHndl;
+
+ if(pStack->stackIdx == 0)
+ return MV_TRUE;
+
+ return MV_FALSE;
+}
+/* Purpose: Push new element to stack
+ * Inputs:
+ * - void* stackHndl - Stack handle as returned by "mvStackCreate()" function.
+ * - MV_U32 value - New element.
+ *
+ * Return: MV_STATUS MV_FULL - Failure. Stack is full.
+ * MV_OK - Success. Element is put to stack.
+ */
+static INLINE void mvStackPush(void* stackHndl, MV_U32 value)
+{
+ MV_STACK* pStack = (MV_STACK*)stackHndl;
+
+#ifdef MV_RT_DEBUG
+ if(pStack->stackIdx == pStack->numOfElements)
+ {
+ mvOsPrintf("mvStackPush: Stack is FULL\n");
+ return;
+ }
+#endif /* MV_RT_DEBUG */
+
+ pStack->stackElements[pStack->stackIdx] = value;
+ pStack->stackIdx++;
+}
+
+/* Purpose: Pop element from the top of stack and copy it to "pValue"
+ * Inputs:
+ * - void* stackHndl - Stack handle as returned by "mvStackCreate()" function.
+ * - MV_U32 value - Element in the top of stack.
+ *
+ * Return: MV_STATUS MV_EMPTY - Failure. Stack is empty.
+ * MV_OK - Success. Element is removed from the stack and
+ * copied to pValue argument
+ */
+static INLINE MV_U32 mvStackPop(void* stackHndl)
+{
+ MV_STACK* pStack = (MV_STACK*)stackHndl;
+
+#ifdef MV_RT_DEBUG
+ if(pStack->stackIdx == 0)
+ {
+ mvOsPrintf("mvStackPop: Stack is EMPTY\n");
+ return 0;
+ }
+#endif /* MV_RT_DEBUG */
+
+ pStack->stackIdx--;
+ return pStack->stackElements[pStack->stackIdx];
+}
+
+static INLINE int mvStackIndex(void* stackHndl)
+{
+ MV_STACK* pStack = (MV_STACK*)stackHndl;
+
+ return pStack->stackIdx;
+}
+
+static INLINE int mvStackFreeElements(void* stackHndl)
+{
+ MV_STACK* pStack = (MV_STACK*)stackHndl;
+
+ return (pStack->numOfElements - pStack->stackIdx);
+}
+
+/* mvStack.h API list */
+
+/* Create new Stack */
+void* mvStackCreate(int numOfElements);
+
+/* Delete existing stack */
+MV_STATUS mvStackDelete(void* stackHndl);
+
+/* Print status of the stack */
+void mvStackStatus(void* stackHndl, MV_BOOL isPrintElements);
+
+#endif /* __mvStack_h__ */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvTypesh
+#define __INCmvTypesh
+
+/* Defines */
+
+/* The following is a list of Marvell status */
+#define MV_ERROR (-1)
+#define MV_OK (0x00) /* Operation succeeded */
+#define MV_FAIL (0x01) /* Operation failed */
+#define MV_BAD_VALUE (0x02) /* Illegal value (general) */
+#define MV_OUT_OF_RANGE (0x03) /* The value is out of range */
+#define MV_BAD_PARAM (0x04) /* Illegal parameter in function called */
+#define MV_BAD_PTR (0x05) /* Illegal pointer value */
+#define MV_BAD_SIZE (0x06) /* Illegal size */
+#define MV_BAD_STATE (0x07) /* Illegal state of state machine */
+#define MV_SET_ERROR (0x08) /* Set operation failed */
+#define MV_GET_ERROR (0x09) /* Get operation failed */
+#define MV_CREATE_ERROR (0x0A) /* Fail while creating an item */
+#define MV_NOT_FOUND (0x0B) /* Item not found */
+#define MV_NO_MORE (0x0C) /* No more items found */
+#define MV_NO_SUCH (0x0D) /* No such item */
+#define MV_TIMEOUT (0x0E) /* Time Out */
+#define MV_NO_CHANGE (0x0F) /* Parameter(s) is already in this value */
+#define MV_NOT_SUPPORTED (0x10) /* This request is not support */
+#define MV_NOT_IMPLEMENTED (0x11) /* Request supported but not implemented */
+#define MV_NOT_INITIALIZED (0x12) /* The item is not initialized */
+#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */
+#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */
+#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */
+#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */
+#define MV_HW_ERROR (0x17) /* Hardware error */
+#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */
+#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */
+#define MV_NOT_READY (0x1A) /* The other side is not ready yet */
+#define MV_ALREADY_EXIST (0x1B) /* Tried to create existing item */
+#define MV_OUT_OF_CPU_MEM (0x1C) /* Cpu memory allocation failed. */
+#define MV_NOT_STARTED (0x1D) /* Not started yet */
+#define MV_BUSY (0x1E) /* Item is busy. */
+#define MV_TERMINATE (0x1F) /* Item terminates it's work. */
+#define MV_NOT_ALIGNED (0x20) /* Wrong alignment */
+#define MV_NOT_ALLOWED (0x21) /* Operation NOT allowed */
+#define MV_WRITE_PROTECT (0x22) /* Write protected */
+
+
+#define MV_INVALID (int)(-1)
+
+#define MV_FALSE 0
+#define MV_TRUE (!(MV_FALSE))
+
+
+#ifndef NULL
+#define NULL ((void*)0)
+#endif
+
+
+#ifndef MV_ASMLANGUAGE
+/* typedefs */
+
+typedef char MV_8;
+typedef unsigned char MV_U8;
+
+typedef int MV_32;
+typedef unsigned int MV_U32;
+
+typedef short MV_16;
+typedef unsigned short MV_U16;
+
+#ifdef MV_PPC64
+typedef long MV_64;
+typedef unsigned long MV_U64;
+#else
+typedef long long MV_64;
+typedef unsigned long long MV_U64;
+#endif
+
+typedef long MV_LONG; /* 32/64 */
+typedef unsigned long MV_ULONG; /* 32/64 */
+
+typedef int MV_STATUS;
+typedef int MV_BOOL;
+typedef void MV_VOID;
+typedef float MV_FLOAT;
+
+typedef int (*MV_FUNCPTR) (void); /* ptr to function returning int */
+typedef void (*MV_VOIDFUNCPTR) (void); /* ptr to function returning void */
+typedef double (*MV_DBLFUNCPTR) (void); /* ptr to function returning double*/
+typedef float (*MV_FLTFUNCPTR) (void); /* ptr to function returning float */
+
+typedef MV_U32 MV_KHZ;
+typedef MV_U32 MV_MHZ;
+typedef MV_U32 MV_HZ;
+
+
+/* This enumerator describes the set of commands that can be applied on */
+/* an engine (e.g. IDMA, XOR). Appling a comman depends on the current */
+/* status (see MV_STATE enumerator) */
+/* Start can be applied only when status is IDLE */
+/* Stop can be applied only when status is IDLE, ACTIVE or PAUSED */
+/* Pause can be applied only when status is ACTIVE */
+/* Restart can be applied only when status is PAUSED */
+typedef enum _mvCommand
+{
+ MV_START, /* Start */
+ MV_STOP, /* Stop */
+ MV_PAUSE, /* Pause */
+ MV_RESTART /* Restart */
+} MV_COMMAND;
+
+/* This enumerator describes the set of state conditions. */
+/* Moving from one state to other is stricted. */
+typedef enum _mvState
+{
+ MV_IDLE,
+ MV_ACTIVE,
+ MV_PAUSED,
+ MV_UNDEFINED_STATE
+} MV_STATE;
+
+
+/* This structure describes address space window. Window base can be */
+/* 64 bit, window size up to 4GB */
+typedef struct _mvAddrWin
+{
+ MV_U32 baseLow; /* 32bit base low */
+ MV_U32 baseHigh; /* 32bit base high */
+ MV_U32 size; /* 32bit size */
+}MV_ADDR_WIN;
+
+/* This binary enumerator describes protection attribute status */
+typedef enum _mvProtRight
+{
+ ALLOWED, /* Protection attribute allowed */
+ FORBIDDEN /* Protection attribute forbidden */
+}MV_PROT_RIGHT;
+
+/* Unified struct for Rx and Tx packet operations. The user is required to */
+/* be familier only with Tx/Rx descriptor command status. */
+typedef struct _bufInfo
+{
+ MV_U32 cmdSts; /* Tx/Rx command status */
+ MV_U16 byteCnt; /* Size of valid data in the buffer */
+ MV_U16 bufSize; /* Total size of the buffer */
+ MV_U8 *pBuff; /* Pointer to Buffer */
+ MV_U8 *pData; /* Pointer to data in the Buffer */
+ MV_U32 userInfo1; /* Tx/Rx attached user information 1 */
+ MV_U32 userInfo2; /* Tx/Rx attached user information 2 */
+ struct _bufInfo *pNextBufInfo; /* Next buffer in packet */
+} BUF_INFO;
+
+/* This structure contains information describing one of buffers
+ * (fragments) they are built Ethernet packet.
+ */
+typedef struct
+{
+ MV_U8* bufVirtPtr;
+ MV_ULONG bufPhysAddr;
+ MV_U32 bufSize;
+ MV_U32 dataSize;
+ MV_U32 memHandle;
+ MV_32 bufAddrShift;
+} MV_BUF_INFO;
+
+/* This structure contains information describing Ethernet packet.
+ * The packet can be divided for few buffers (fragments)
+ */
+typedef struct
+{
+ MV_ULONG osInfo;
+ MV_BUF_INFO *pFrags;
+ MV_U32 status;
+ MV_U16 pktSize;
+ MV_U16 numFrags;
+ MV_U32 ownerId;
+ MV_U32 fragIP;
+} MV_PKT_INFO;
+
+#endif /* MV_ASMLANGUAGE */
+
+#endif /* __INCmvTypesh */
+
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include "dbg-trace.h"
+
+#define TRACE_ARR_LEN 800
+#define STR_LEN 128
+struct trace {
+ struct timeval tv;
+ char str[STR_LEN];
+ unsigned int callback_val1;
+ unsigned int callback_val2;
+ char valid;
+};
+static unsigned int (*trc_callback1) (unsigned char) = NULL;
+static unsigned int (*trc_callback2) (unsigned char) = NULL;
+static unsigned char trc_param1 = 0;
+static unsigned char trc_param2 = 0;
+struct trace *trc_arr;
+static int trc_index;
+static int trc_active = 0;
+
+void TRC_START()
+{
+ trc_active = 1;
+}
+
+void TRC_STOP()
+{
+ trc_active = 0;
+}
+
+void TRC_INIT(void *callback1, void *callback2, unsigned char callback1_param, unsigned char callback2_param)
+{
+ printk("Marvell debug tracing is on\n");
+ trc_arr = (struct trace *)kmalloc(TRACE_ARR_LEN*sizeof(struct trace),GFP_KERNEL);
+ if(trc_arr == NULL)
+ {
+ printk("Can't allocate Debug Trace buffer\n");
+ return;
+ }
+ memset(trc_arr,0,TRACE_ARR_LEN*sizeof(struct trace));
+ trc_index = 0;
+ trc_callback1 = callback1;
+ trc_callback2 = callback2;
+ trc_param1 = callback1_param;
+ trc_param2 = callback2_param;
+}
+void TRC_REC(char *fmt,...)
+{
+ va_list args;
+ struct trace *trc = &trc_arr[trc_index];
+
+ if(trc_active == 0)
+ return;
+
+ do_gettimeofday(&trc->tv);
+ if(trc_callback1)
+ trc->callback_val1 = trc_callback1(trc_param1);
+ if(trc_callback2)
+ trc->callback_val2 = trc_callback2(trc_param2);
+ va_start(args, fmt);
+ vsprintf(trc->str,fmt,args);
+ va_end(args);
+ trc->valid = 1;
+ if((++trc_index) == TRACE_ARR_LEN) {
+ trc_index = 0;
+ }
+}
+void TRC_OUTPUT(void)
+{
+ int i,j;
+ struct trace *p;
+ printk("\n\nTrace %d items\n",TRACE_ARR_LEN);
+ for(i=0,j=trc_index; i<TRACE_ARR_LEN; i++,j++) {
+ if(j == TRACE_ARR_LEN)
+ j = 0;
+ p = &trc_arr[j];
+ if(p->valid) {
+ unsigned long uoffs;
+ struct trace *plast;
+ if(p == &trc_arr[0])
+ plast = &trc_arr[TRACE_ARR_LEN-1];
+ else
+ plast = p-1;
+ if(p->tv.tv_sec == ((plast)->tv.tv_sec))
+ uoffs = (p->tv.tv_usec - ((plast)->tv.tv_usec));
+ else
+ uoffs = (1000000 - ((plast)->tv.tv_usec)) +
+ ((p->tv.tv_sec - ((plast)->tv.tv_sec) - 1) * 1000000) +
+ p->tv.tv_usec;
+ printk("%03d: [+%ld usec]", j, (unsigned long)uoffs);
+ if(trc_callback1)
+ printk("[%u]",p->callback_val1);
+ if(trc_callback2)
+ printk("[%u]",p->callback_val2);
+ printk(": %s",p->str);
+ }
+ p->valid = 0;
+ }
+ memset(trc_arr,0,TRACE_ARR_LEN*sizeof(struct trace));
+ trc_index = 0;
+}
+void TRC_RELEASE(void)
+{
+ kfree(trc_arr);
+ trc_index = 0;
+}
+
+
--- /dev/null
+
+#ifndef _MV_DBG_TRCE_H_
+#define _MV_DBG_TRCE_H_
+
+#ifdef CONFIG_MV_DBG_TRACE
+void TRC_INIT(void *callback1, void *callback2,
+ unsigned char callback1_param, unsigned char callback2_param);
+void TRC_REC(char *fmt,...);
+void TRC_OUTPUT(void);
+void TRC_RELEASE(void);
+void TRC_START(void);
+void TRC_STOP(void);
+
+#else
+#define TRC_INIT(x1,x2,x3,x4)
+#define TRC_REC(X...)
+#define TRC_OUTPUT()
+#define TRC_RELEASE()
+#define TRC_START()
+#define TRC_STOP()
+#endif
+
+
+#endif
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "boardEnv/mvBoardEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "cpu/mvCpu.h"
+#include "cntmr/mvCntmr.h"
+#include "gpp/mvGpp.h"
+#include "twsi/mvTwsi.h"
+#include "pex/mvPex.h"
+#include "device/mvDevice.h"
+#include "eth/gbe/mvEthRegs.h"
+
+/* defines */
+/* #define MV_DEBUG */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+extern MV_CPU_ARM_CLK _cpuARMDDRCLK[];
+
+#define CODE_IN_ROM MV_FALSE
+#define CODE_IN_RAM MV_TRUE
+
+extern MV_BOARD_INFO* boardInfoTbl[];
+#define BOARD_INFO(boardId) boardInfoTbl[boardId - BOARD_ID_BASE]
+
+/* Locals */
+static MV_DEV_CS_INFO* boardGetDevEntry(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+
+MV_U32 tClkRate = -1;
+
+
+/*******************************************************************************
+* mvBoardEnvInit - Init board
+*
+* DESCRIPTION:
+* In this function the board environment take care of device bank
+* initialization.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvBoardEnvInit(MV_VOID)
+{
+ MV_U32 boardId= mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardEnvInit:Board unknown.\n");
+ return;
+
+ }
+
+ /* Set GPP Out value */
+ MV_REG_WRITE(GPP_DATA_OUT_REG(0), BOARD_INFO(boardId)->gppOutValLow);
+ MV_REG_WRITE(GPP_DATA_OUT_REG(1), BOARD_INFO(boardId)->gppOutValHigh);
+
+ /* set GPP polarity */
+ mvGppPolaritySet(0, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValLow);
+ mvGppPolaritySet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValHigh);
+
+ /* Workaround for Erratum FE-MISC-70*/
+ if(mvCtrlRevGet()==MV_88F6XXX_A0_REV)
+ {
+ BOARD_INFO(boardId)->gppOutEnValLow &= 0xfffffffd;
+ BOARD_INFO(boardId)->gppOutEnValLow |= (BOARD_INFO(boardId)->gppOutEnValHigh) & 0x00000002;
+ } /*End of WA*/
+
+ /* Set GPP Out Enable*/
+ mvGppTypeSet(0, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValLow);
+ mvGppTypeSet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValHigh);
+
+ /* Nand CE */
+ MV_REG_BIT_SET(NAND_CTRL_REG, NAND_ACTCEBOOT_BIT);
+}
+
+/*******************************************************************************
+* mvBoardModelGet - Get Board model
+*
+* DESCRIPTION:
+* This function returns 16bit describing board model.
+* Board model is constructed of one byte major and minor numbers in the
+* following manner:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* String describing board model.
+*
+*******************************************************************************/
+MV_U16 mvBoardModelGet(MV_VOID)
+{
+ return (mvBoardIdGet() >> 16);
+}
+
+/*******************************************************************************
+* mbBoardRevlGet - Get Board revision
+*
+* DESCRIPTION:
+* This function returns a 32bit describing the board revision.
+* Board revision is constructed of 4bytes. 2bytes describes major number
+* and the other 2bytes describes minor munber.
+* For example for board revision 3.4 the function will return
+* 0x00030004.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* String describing board model.
+*
+*******************************************************************************/
+MV_U16 mvBoardRevGet(MV_VOID)
+{
+ return (mvBoardIdGet() & 0xFFFF);
+}
+
+/*******************************************************************************
+* mvBoardNameGet - Get Board name
+*
+* DESCRIPTION:
+* This function returns a string describing the board model and revision.
+* String is extracted from board I2C EEPROM.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* pNameBuff - Buffer to contain board name string. Minimum size 32 chars.
+*
+* RETURN:
+*
+* MV_ERROR if informantion can not be read.
+*******************************************************************************/
+MV_STATUS mvBoardNameGet(char *pNameBuff)
+{
+ MV_U32 boardId= mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsSPrintf (pNameBuff, "Board unknown.\n");
+ return MV_ERROR;
+
+ }
+
+ mvOsSPrintf (pNameBuff, "%s",BOARD_INFO(boardId)->boardName);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvBoardIsPortInSgmii -
+*
+* DESCRIPTION:
+* This routine returns MV_TRUE for port number works in SGMII or MV_FALSE
+* For all other options.
+*
+* INPUT:
+* ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE - port in SGMII.
+* MV_FALSE - other.
+*
+*******************************************************************************/
+MV_BOOL mvBoardIsPortInSgmii(MV_U32 ethPortNum)
+{
+ MV_BOOL ethPortSgmiiSupport[BOARD_ETH_PORT_NUM] = MV_ETH_PORT_SGMII;
+
+ if(ethPortNum >= BOARD_ETH_PORT_NUM)
+ {
+ mvOsPrintf ("Invalid portNo=%d\n", ethPortNum);
+ return MV_FALSE;
+ }
+ return ethPortSgmiiSupport[ethPortNum];
+}
+
+/*******************************************************************************
+* mvBoardIsPortInGmii -
+*
+* DESCRIPTION:
+* This routine returns MV_TRUE for port number works in GMII or MV_FALSE
+* For all other options.
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE - port in GMII.
+* MV_FALSE - other.
+*
+*******************************************************************************/
+MV_BOOL mvBoardIsPortInGmii(MV_VOID)
+{
+ MV_U32 devClassId, devClass = 0;
+ if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_AUTO)
+ {
+ /* Get MPP module ID */
+ devClassId = mvBoarModuleTypeGet(devClass);
+ if (MV_BOARD_MODULE_GMII_ID == devClassId)
+ return MV_TRUE;
+ }
+ else if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_GMII)
+ return MV_TRUE;
+
+ return MV_FALSE;
+}
+/*******************************************************************************
+* mvBoardPhyAddrGet - Get the phy address
+*
+* DESCRIPTION:
+* This routine returns the Phy address of a given ethernet port.
+*
+* INPUT:
+* ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit describing Phy address, -1 if the port number is wrong.
+*
+*******************************************************************************/
+MV_32 mvBoardPhyAddrGet(MV_U32 ethPortNum)
+{
+ MV_U32 boardId= mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardPhyAddrGet: Board unknown.\n");
+ return MV_ERROR;
+ }
+
+ return BOARD_INFO(boardId)->pBoardMacInfo[ethPortNum].boardEthSmiAddr;
+}
+
+/*******************************************************************************
+* mvBoardMacSpeedGet - Get the Mac speed
+*
+* DESCRIPTION:
+* This routine returns the Mac speed if pre define of a given ethernet port.
+*
+* INPUT:
+* ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BOARD_MAC_SPEED, -1 if the port number is wrong.
+*
+*******************************************************************************/
+MV_BOARD_MAC_SPEED mvBoardMacSpeedGet(MV_U32 ethPortNum)
+{
+ MV_U32 boardId= mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardMacSpeedGet: Board unknown.\n");
+ return MV_ERROR;
+ }
+
+ return BOARD_INFO(boardId)->pBoardMacInfo[ethPortNum].boardMacSpeed;
+}
+
+/*******************************************************************************
+* mvBoardLinkStatusIrqGet - Get the IRQ number for the link status indication
+*
+* DESCRIPTION:
+* This routine returns the IRQ number for the link status indication.
+*
+* INPUT:
+* ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* the number of the IRQ for the link status indication, -1 if the port
+* number is wrong or if not relevant.
+*
+*******************************************************************************/
+MV_32 mvBoardLinkStatusIrqGet(MV_U32 ethPortNum)
+{
+ MV_U32 boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardLinkStatusIrqGet: Board unknown.\n");
+ return MV_ERROR;
+ }
+
+ return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].linkStatusIrq;
+}
+
+/*******************************************************************************
+* mvBoardSwitchPortGet - Get the mapping between the board connector and the
+* Ethernet Switch port
+*
+* DESCRIPTION:
+* This routine returns the matching Switch port.
+*
+* INPUT:
+* ethPortNum - Ethernet port number.
+* boardPortNum - logical number of the connector on the board
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* the matching Switch port, -1 if the port number is wrong or if not relevant.
+*
+*******************************************************************************/
+MV_32 mvBoardSwitchPortGet(MV_U32 ethPortNum, MV_U8 boardPortNum)
+{
+ MV_U32 boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardSwitchPortGet: Board unknown.\n");
+ return MV_ERROR;
+ }
+ if (boardPortNum >= BOARD_ETH_SWITCH_PORT_NUM)
+ {
+ mvOsPrintf("mvBoardSwitchPortGet: Illegal board port number.\n");
+ return MV_ERROR;
+ }
+
+ return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].qdPort[boardPortNum];
+}
+
+/*******************************************************************************
+* mvBoardSwitchCpuPortGet - Get the the Ethernet Switch CPU port
+*
+* DESCRIPTION:
+* This routine returns the Switch CPU port.
+*
+* INPUT:
+* ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* the Switch CPU port, -1 if the port number is wrong or if not relevant.
+*
+*******************************************************************************/
+MV_32 mvBoardSwitchCpuPortGet(MV_U32 ethPortNum)
+{
+ MV_U32 boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardSwitchCpuPortGet: Board unknown.\n");
+ return MV_ERROR;
+ }
+
+ return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].qdCpuPort;
+}
+
+/*******************************************************************************
+* mvBoardIsSwitchConnected - Get switch connection status
+* DESCRIPTION:
+* This routine returns port's connection status
+*
+* INPUT:
+* ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 1 - if ethPortNum is connected to switch, 0 otherwise
+*
+*******************************************************************************/
+MV_32 mvBoardIsSwitchConnected(MV_U32 ethPortNum)
+{
+ MV_U32 boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardIsSwitchConnected: Board unknown.\n");
+ return MV_ERROR;
+ }
+
+ if(ethPortNum >= BOARD_INFO(boardId)->numBoardMacInfo)
+ {
+ mvOsPrintf("mvBoardIsSwitchConnected: Illegal port number(%u)\n", ethPortNum);
+ return MV_ERROR;
+ }
+
+ if((MV_32)(BOARD_INFO(boardId)->pSwitchInfo))
+ return (MV_32)(BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].switchOnPort == ethPortNum);
+ else
+ return 0;
+}
+/*******************************************************************************
+* mvBoardSmiScanModeGet - Get Switch SMI scan mode
+*
+* DESCRIPTION:
+* This routine returns Switch SMI scan mode.
+*
+* INPUT:
+* ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 1 for SMI_MANUAL_MODE, -1 if the port number is wrong or if not relevant.
+*
+*******************************************************************************/
+MV_32 mvBoardSmiScanModeGet(MV_U32 ethPortNum)
+{
+ MV_U32 boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardSmiScanModeGet: Board unknown.\n");
+ return MV_ERROR;
+ }
+
+ return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].smiScanMode;
+}
+/*******************************************************************************
+* mvBoardSpecInitGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN: Return MV_TRUE and parameters in case board need spesific phy init,
+* otherwise return MV_FALSE.
+*
+*
+*******************************************************************************/
+
+MV_BOOL mvBoardSpecInitGet(MV_U32* regOff, MV_U32* data)
+{
+ return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvBoardTclkGet - Get the board Tclk (Controller clock)
+*
+* DESCRIPTION:
+* This routine extract the controller core clock.
+* This function uses the controller counters to make identification.
+* Note: In order to avoid interference, make sure task context switch
+* and interrupts will not occure during this function operation
+*
+* INPUT:
+* countNum - Counter number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit clock cycles in Hertz.
+*
+*******************************************************************************/
+MV_U32 mvBoardTclkGet(MV_VOID)
+{
+ if(mvCtrlModelGet()==MV_6281_DEV_ID)
+ {
+#if defined(TCLK_AUTO_DETECT)
+ MV_U32 tmpTClkRate = MV_BOARD_TCLK_166MHZ;
+
+ tmpTClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+ tmpTClkRate &= MSAR_TCLCK_MASK;
+
+ switch (tmpTClkRate)
+ {
+ case MSAR_TCLCK_166:
+ return MV_BOARD_TCLK_166MHZ;
+ break;
+ case MSAR_TCLCK_200:
+ return MV_BOARD_TCLK_200MHZ;
+ break;
+ }
+#else
+ return MV_BOARD_TCLK_200MHZ;
+#endif
+ }
+
+ return MV_BOARD_TCLK_166MHZ;
+
+}
+/*******************************************************************************
+* mvBoardSysClkGet - Get the board SysClk (CPU bus clock)
+*
+* DESCRIPTION:
+* This routine extract the CPU bus clock.
+*
+* INPUT:
+* countNum - Counter number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit clock cycles in Hertz.
+*
+*******************************************************************************/
+static MV_U32 mvBoard6180SysClkGet(MV_VOID)
+{
+ MV_U32 sysClkRate=0;
+ MV_CPU_ARM_CLK _cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL;
+
+ sysClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+ sysClkRate = sysClkRate & MSAR_CPUCLCK_MASK_6180;
+ sysClkRate = sysClkRate >> MSAR_CPUCLCK_OFFS_6180;
+
+ sysClkRate = _cpu6180_ddr_l2_CLK[sysClkRate].ddrClk;
+
+ return sysClkRate;
+
+}
+
+MV_U32 mvBoardSysClkGet(MV_VOID)
+{
+#ifdef SYSCLK_AUTO_DETECT
+ MV_U32 sysClkRate, tmp, pClkRate, indexDdrRtio;
+ MV_U32 cpuCLK[] = MV_CPU_CLCK_TBL;
+ MV_U32 ddrRtio[][2] = MV_DDR_CLCK_RTIO_TBL;
+
+ if(mvCtrlModelGet() == MV_6180_DEV_ID)
+ return mvBoard6180SysClkGet();
+
+ tmp = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+ pClkRate = MSAR_CPUCLCK_EXTRACT(tmp);
+ pClkRate = cpuCLK[pClkRate];
+
+ indexDdrRtio = tmp & MSAR_DDRCLCK_RTIO_MASK;
+ indexDdrRtio = indexDdrRtio >> MSAR_DDRCLCK_RTIO_OFFS;
+ if(ddrRtio[indexDdrRtio][0] != 0)
+ sysClkRate = ((pClkRate * ddrRtio[indexDdrRtio][1]) / ddrRtio[indexDdrRtio][0]);
+ else
+ sysClkRate = 0;
+ return sysClkRate;
+#else
+ return MV_BOARD_DEFAULT_SYSCLK;
+#endif
+}
+
+
+/*******************************************************************************
+* mvBoardPexBridgeIntPinGet - Get PEX to PCI bridge interrupt pin number
+*
+* DESCRIPTION:
+* Multi-ported PCI Express bridges that is implemented on the board
+* collapse interrupts across multiple conventional PCI/PCI-X buses.
+* A dual-headed PCI Express bridge would map (or "swizzle") the
+* interrupts per the following table (in accordance with the respective
+* logical PCI/PCI-X bridge's Device Number), collapse the INTA#-INTD#
+* signals from its two logical PCI/PCI-X bridges, collapse the
+* INTA#-INTD# signals from any internal sources, and convert the
+* signals to in-band PCI Express messages. 10
+* This function returns the upstream interrupt as it was converted by
+* the bridge, according to board configuration and the following table:
+* PCI dev num
+* Interrupt pin 7, 8, 9
+* A -> A D C
+* B -> B A D
+* C -> C B A
+* D -> D C B
+*
+*
+* INPUT:
+* devNum - PCI/PCIX device number.
+* intPin - PCI Int pin
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Int pin connected to the Interrupt controller
+*
+*******************************************************************************/
+MV_U32 mvBoardPexBridgeIntPinGet(MV_U32 devNum, MV_U32 intPin)
+{
+ MV_U32 realIntPin = ((intPin + (3 - (devNum % 4))) %4 );
+
+ if (realIntPin == 0) return 4;
+ else return realIntPin;
+
+}
+
+/*******************************************************************************
+* mvBoardDebugLedNumGet - Get number of debug Leds
+*
+* DESCRIPTION:
+* INPUT:
+* boardId
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_U32 mvBoardDebugLedNumGet(MV_U32 boardId)
+{
+ return BOARD_INFO(boardId)->activeLedsNumber;
+}
+
+/*******************************************************************************
+* mvBoardDebugLeg - Set the board debug Leds
+*
+* DESCRIPTION: turn on/off status leds.
+* Note: assume MPP leds are part of group 0 only.
+*
+* INPUT:
+* hexNum - Number to be displied in hex by Leds.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvBoardDebugLed(MV_U32 hexNum)
+{
+ MV_U32 val = 0,totalMask, currentBitMask = 1,i;
+ MV_U32 boardId= mvBoardIdGet();
+
+ if (BOARD_INFO(boardId)->pLedGppPin == NULL)
+ return;
+
+ totalMask = (1 << BOARD_INFO(boardId)->activeLedsNumber) -1;
+ hexNum &= totalMask;
+ totalMask = 0;
+
+ for (i = 0 ; i < BOARD_INFO(boardId)->activeLedsNumber ; i++)
+ {
+ if (hexNum & currentBitMask)
+ {
+ val |= (1 << BOARD_INFO(boardId)->pLedGppPin[i]);
+ }
+
+ totalMask |= (1 << BOARD_INFO(boardId)->pLedGppPin[i]);
+
+ currentBitMask = (currentBitMask << 1);
+ }
+
+ if (BOARD_INFO(boardId)->ledsPolarity)
+ {
+ mvGppValueSet(0, totalMask, val);
+ }
+ else
+ {
+ mvGppValueSet(0, totalMask, ~val);
+ }
+}
+
+
+/*******************************************************************************
+* mvBoarGpioPinGet - mvBoarGpioPinGet
+*
+* DESCRIPTION:
+*
+* INPUT:
+* class - MV_BOARD_GPP_CLASS enum.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoarGpioPinNumGet(MV_BOARD_GPP_CLASS class, MV_U32 index)
+{
+ MV_U32 boardId, i;
+ MV_U32 indexFound = 0;
+
+ boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardRTCGpioPinGet:Board unknown.\n");
+ return MV_ERROR;
+
+ }
+
+ for (i = 0; i < BOARD_INFO(boardId)->numBoardGppInfo; i++)
+ if (BOARD_INFO(boardId)->pBoardGppInfo[i].devClass == class) {
+ if (indexFound == index)
+ return (MV_U32)BOARD_INFO(boardId)->pBoardGppInfo[i].gppPinNum;
+ else
+ indexFound++;
+
+ }
+
+ return MV_ERROR;
+}
+
+
+/*******************************************************************************
+* mvBoardRTCGpioPinGet - mvBoardRTCGpioPinGet
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoardRTCGpioPinGet(MV_VOID)
+{
+ return mvBoarGpioPinNumGet(BOARD_GPP_RTC, 0);
+}
+
+
+/*******************************************************************************
+* mvBoardReset - mvBoardReset
+*
+* DESCRIPTION:
+* Reset the board
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None
+*
+*******************************************************************************/
+MV_VOID mvBoardReset(MV_VOID)
+{
+ MV_32 resetPin;
+
+ /* Get gpp reset pin if define */
+ resetPin = mvBoardResetGpioPinGet();
+ if (resetPin != MV_ERROR)
+ {
+ MV_REG_BIT_RESET( GPP_DATA_OUT_REG(0) ,(1 << resetPin));
+ MV_REG_BIT_RESET( GPP_DATA_OUT_EN_REG(0) ,(1 << resetPin));
+
+ }
+ else
+ {
+ /* No gpp reset pin was found, try to reset ussing
+ system reset out */
+ MV_REG_BIT_SET( CPU_RSTOUTN_MASK_REG , BIT2);
+ MV_REG_BIT_SET( CPU_SYS_SOFT_RST_REG , BIT0);
+ }
+}
+
+/*******************************************************************************
+* mvBoardResetGpioPinGet - mvBoardResetGpioPinGet
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoardResetGpioPinGet(MV_VOID)
+{
+ return mvBoarGpioPinNumGet(BOARD_GPP_RESET, 0);
+}
+/*******************************************************************************
+* mvBoardSDIOGpioPinGet - mvBoardSDIOGpioPinGet
+*
+* DESCRIPTION:
+* used for hotswap detection
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoardSDIOGpioPinGet(MV_VOID)
+{
+ return mvBoarGpioPinNumGet(BOARD_GPP_SDIO_DETECT, 0);
+}
+
+/*******************************************************************************
+* mvBoardUSBVbusGpioPinGet - return Vbus input GPP
+*
+* DESCRIPTION:
+*
+* INPUT:
+* int devNo.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoardUSBVbusGpioPinGet(MV_32 devId)
+{
+ return mvBoarGpioPinNumGet(BOARD_GPP_USB_VBUS, devId);
+}
+
+/*******************************************************************************
+* mvBoardUSBVbusEnGpioPinGet - return Vbus Enable output GPP
+*
+* DESCRIPTION:
+*
+* INPUT:
+* int devNo.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoardUSBVbusEnGpioPinGet(MV_32 devId)
+{
+ return mvBoarGpioPinNumGet(BOARD_GPP_USB_VBUS_EN, devId);
+}
+
+
+/*******************************************************************************
+* mvBoardGpioIntMaskGet - Get GPIO mask for interrupt pins
+*
+* DESCRIPTION:
+* This function returns a 32-bit mask of GPP pins that connected to
+* interrupt generating sources on board.
+* For example if UART channel A is hardwired to GPP pin 8 and
+* UART channel B is hardwired to GPP pin 4 the fuinction will return
+* the value 0x000000110
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* See description. The function return -1 if board is not identified.
+*
+*******************************************************************************/
+MV_32 mvBoardGpioIntMaskLowGet(MV_VOID)
+{
+ MV_U32 boardId;
+
+ boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardGpioIntMaskGet:Board unknown.\n");
+ return MV_ERROR;
+
+ }
+
+ return BOARD_INFO(boardId)->intsGppMaskLow;
+}
+MV_32 mvBoardGpioIntMaskHighGet(MV_VOID)
+{
+ MV_U32 boardId;
+
+ boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardGpioIntMaskGet:Board unknown.\n");
+ return MV_ERROR;
+
+ }
+
+ return BOARD_INFO(boardId)->intsGppMaskHigh;
+}
+
+
+/*******************************************************************************
+* mvBoardMppGet - Get board dependent MPP register value
+*
+* DESCRIPTION:
+* MPP settings are derived from board design.
+* MPP group consist of 8 MPPs. An MPP group represent MPP
+* control register.
+* This function retrieves board dependend MPP register value.
+*
+* INPUT:
+* mppGroupNum - MPP group number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit value describing MPP control register value.
+*
+*******************************************************************************/
+MV_32 mvBoardMppGet(MV_U32 mppGroupNum)
+{
+ MV_U32 boardId;
+
+ boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardMppGet:Board unknown.\n");
+ return MV_ERROR;
+
+ }
+
+ return BOARD_INFO(boardId)->pBoardMppConfigValue[0].mppGroup[mppGroupNum];
+}
+
+
+/*******************************************************************************
+* mvBoardMppGroupId - If MPP group type is AUTO then identify it using twsi
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvBoardMppGroupIdUpdate(MV_VOID)
+{
+
+ MV_BOARD_MPP_GROUP_CLASS devClass;
+ MV_BOARD_MODULE_ID_CLASS devClassId;
+ MV_BOARD_MPP_TYPE_CLASS mppGroupType;
+ MV_U32 devId;
+ MV_U32 maxMppGrp = 1;
+
+ devId = mvCtrlModelGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ maxMppGrp = MV_6281_MPP_MAX_MODULE;
+ break;
+ case MV_6192_DEV_ID:
+ maxMppGrp = MV_6192_MPP_MAX_MODULE;
+ break;
+ case MV_6190_DEV_ID:
+ maxMppGrp = MV_6190_MPP_MAX_MODULE;
+ break;
+ case MV_6180_DEV_ID:
+ maxMppGrp = MV_6180_MPP_MAX_MODULE;
+ break;
+ }
+
+ for (devClass = 0; devClass < maxMppGrp; devClass++)
+ {
+ /* If MPP group can be defined by the module connected to it */
+ if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_AUTO)
+ {
+ /* Get MPP module ID */
+ devClassId = mvBoarModuleTypeGet(devClass);
+ if (MV_ERROR != devClassId)
+ {
+ switch(devClassId)
+ {
+ case MV_BOARD_MODULE_TDM_ID:
+ case MV_BOARD_MODULE_TDM_5CHAN_ID:
+ mppGroupType = MV_BOARD_TDM;
+ break;
+ case MV_BOARD_MODULE_AUDIO_ID:
+ mppGroupType = MV_BOARD_AUDIO;
+ break;
+ case MV_BOARD_MODULE_RGMII_ID:
+ mppGroupType = MV_BOARD_RGMII;
+ break;
+ case MV_BOARD_MODULE_GMII_ID:
+ mppGroupType = MV_BOARD_GMII;
+ break;
+ case MV_BOARD_MODULE_TS_ID:
+ mppGroupType = MV_BOARD_TS;
+ break;
+ case MV_BOARD_MODULE_MII_ID:
+ mppGroupType = MV_BOARD_MII;
+ break;
+ default:
+ mppGroupType = MV_BOARD_OTHER;
+ break;
+ }
+ }
+ else
+ /* The module bay is empty */
+ mppGroupType = MV_BOARD_OTHER;
+
+ /* Update MPP group type */
+ mvBoardMppGroupTypeSet(devClass, mppGroupType);
+ }
+
+ /* Update MPP output voltage for RGMII 1.8V. Set port to GMII for GMII module */
+ if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_RGMII))
+ MV_REG_BIT_SET(MPP_OUTPUT_DRIVE_REG,MPP_1_8_RGMII1_OUTPUT_DRIVE | MPP_1_8_RGMII0_OUTPUT_DRIVE);
+ else
+ {
+ if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_GMII))
+ {
+ MV_REG_BIT_RESET(MPP_OUTPUT_DRIVE_REG, BIT7 | BIT15);
+ MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(0),BIT3);
+ MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(1),BIT3);
+ }
+ else if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_MII))
+ {
+ /* Assumption that the MDC & MDIO should be 3.3V */
+ MV_REG_BIT_RESET(MPP_OUTPUT_DRIVE_REG, BIT7 | BIT15);
+ /* Assumption that only ETH1 can be MII when using modules on DB */
+ MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(1),BIT3);
+ }
+ }
+ }
+}
+
+/*******************************************************************************
+* mvBoardMppGroupTypeGet
+*
+* DESCRIPTION:
+*
+* INPUT:
+* mppGroupClass - MPP group number 0 for MPP[35:20] or 1 for MPP[49:36].
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_BOARD_MPP_TYPE_CLASS mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass)
+{
+ MV_U32 boardId;
+
+ boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardMppGet:Board unknown.\n");
+ return MV_ERROR;
+
+ }
+
+ if (mppGroupClass == MV_BOARD_MPP_GROUP_1)
+ return BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup1;
+ else
+ return BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup2;
+}
+
+/*******************************************************************************
+* mvBoardMppGroupTypeSet
+*
+* DESCRIPTION:
+*
+* INPUT:
+* mppGroupClass - MPP group number 0 for MPP[35:20] or 1 for MPP[49:36].
+* mppGroupType - MPP group type for MPP[35:20] or for MPP[49:36].
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvBoardMppGroupTypeSet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass,
+ MV_BOARD_MPP_TYPE_CLASS mppGroupType)
+{
+ MV_U32 boardId;
+
+ boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardMppGet:Board unknown.\n");
+ }
+
+ if (mppGroupClass == MV_BOARD_MPP_GROUP_1)
+ BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup1 = mppGroupType;
+ else
+ BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup2 = mppGroupType;
+
+}
+
+/*******************************************************************************
+* mvBoardMppMuxSet - Update MPP mux
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvBoardMppMuxSet(MV_VOID)
+{
+
+ MV_BOARD_MPP_GROUP_CLASS devClass;
+ MV_BOARD_MPP_TYPE_CLASS mppGroupType;
+ MV_U32 devId;
+ MV_U8 muxVal = 0xf;
+ MV_U32 maxMppGrp = 1;
+ MV_TWSI_SLAVE twsiSlave;
+ MV_TWSI_ADDR slave;
+
+ devId = mvCtrlModelGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ maxMppGrp = MV_6281_MPP_MAX_MODULE;
+ break;
+ case MV_6192_DEV_ID:
+ maxMppGrp = MV_6192_MPP_MAX_MODULE;
+ break;
+ case MV_6190_DEV_ID:
+ maxMppGrp = MV_6190_MPP_MAX_MODULE;
+ break;
+ case MV_6180_DEV_ID:
+ maxMppGrp = MV_6180_MPP_MAX_MODULE;
+ break;
+ }
+
+ for (devClass = 0; devClass < maxMppGrp; devClass++)
+ {
+ mppGroupType = mvBoardMppGroupTypeGet(devClass);
+
+ switch(mppGroupType)
+ {
+ case MV_BOARD_TDM:
+ muxVal &= ~(devClass ? (0x2 << (devClass * 2)):0x0);
+ break;
+ case MV_BOARD_AUDIO:
+ muxVal &= ~(devClass ? 0x7 : 0x0); /*old Z0 value 0xd:0x0*/
+ break;
+ case MV_BOARD_TS:
+ muxVal &= ~(devClass ? (0x2 << (devClass * 2)):0x0);
+ break;
+ default:
+ muxVal |= (devClass ? 0xf : 0);
+ break;
+ }
+ }
+
+ /* TWSI init */
+ slave.type = ADDR7_BIT;
+ slave.address = 0;
+ mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+ /* Read MPP module ID */
+ DB(mvOsPrintf("Board: twsi exp set\n"));
+ twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(MV_BOARD_MUX_I2C_ADDR_ENTRY);
+ twsiSlave.slaveAddr.type = mvBoardTwsiExpAddrTypeGet(MV_BOARD_MUX_I2C_ADDR_ENTRY);
+ twsiSlave.validOffset = MV_TRUE;
+ /* Offset is the first command after the address which indicate the register number to be read
+ in next operation */
+ twsiSlave.offset = 2;
+ twsiSlave.moreThen256 = MV_FALSE;
+
+
+
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+ {
+ DB(mvOsPrintf("Board: twsi exp out val fail\n"));
+ return;
+ }
+ DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+
+ /* Change twsi exp to output */
+ twsiSlave.offset = 6;
+ muxVal = 0;
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+ {
+ DB(mvOsPrintf("Board: twsi exp change to out fail\n"));
+ return;
+ }
+ DB(mvOsPrintf("Board: twsi exp change to out succeded\n"));
+
+}
+
+/*******************************************************************************
+* mvBoardTdmMppSet - set MPPs in TDM module
+*
+* DESCRIPTION:
+*
+* INPUT: type of second telephony device
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvBoardTdmMppSet(MV_32 chType)
+{
+
+ MV_BOARD_MPP_GROUP_CLASS devClass;
+ MV_BOARD_MPP_TYPE_CLASS mppGroupType;
+ MV_U32 devId;
+ MV_U8 muxVal = 1;
+ MV_U8 muxValMask = 1;
+ MV_U8 twsiVal;
+ MV_U32 maxMppGrp = 1;
+ MV_TWSI_SLAVE twsiSlave;
+ MV_TWSI_ADDR slave;
+
+ devId = mvCtrlModelGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ maxMppGrp = MV_6281_MPP_MAX_MODULE;
+ break;
+ case MV_6192_DEV_ID:
+ maxMppGrp = MV_6192_MPP_MAX_MODULE;
+ break;
+ case MV_6190_DEV_ID:
+ maxMppGrp = MV_6190_MPP_MAX_MODULE;
+ break;
+ case MV_6180_DEV_ID:
+ maxMppGrp = MV_6180_MPP_MAX_MODULE;
+ break;
+ }
+
+ for (devClass = 0; devClass < maxMppGrp; devClass++)
+ {
+ mppGroupType = mvBoardMppGroupTypeGet(devClass);
+ if(mppGroupType == MV_BOARD_TDM)
+ break;
+ }
+
+ if(devClass == maxMppGrp)
+ return; /* TDM module not found */
+
+ /* TWSI init */
+ slave.type = ADDR7_BIT;
+ slave.address = 0;
+ mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+ /* Read MPP module ID */
+ DB(mvOsPrintf("Board: twsi exp set\n"));
+ twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(devClass);
+ twsiSlave.slaveAddr.type = ADDR7_BIT;
+ twsiSlave.validOffset = MV_TRUE;
+ /* Offset is the first command after the address which indicate the register number to be read
+ in next operation */
+ twsiSlave.offset = 3;
+ twsiSlave.moreThen256 = MV_FALSE;
+
+ if(mvBoardIdGet() == RD_88F6281A_ID)
+ {
+ muxVal = 0xc;
+ muxValMask = 0xf3;
+ }
+
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ muxVal = (twsiVal & muxValMask) | muxVal;
+
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+ {
+ mvOsPrintf("Board: twsi exp out val fail\n");
+ return;
+ }
+ DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+
+ /* Change twsi exp to output */
+ twsiSlave.offset = 7;
+ muxVal = 0xfe;
+ if(mvBoardIdGet() == RD_88F6281A_ID)
+ muxVal = 0xf3;
+
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ muxVal = (twsiVal & muxVal);
+
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+ {
+ mvOsPrintf("Board: twsi exp change to out fail\n");
+ return;
+ }
+ DB(mvOsPrintf("Board: twsi exp change to out succeded\n"));
+ /* reset the line to 0 */
+ twsiSlave.offset = 3;
+ muxVal = 0;
+ muxValMask = 1;
+
+ if(mvBoardIdGet() == RD_88F6281A_ID) {
+ muxVal = 0x0;
+ muxValMask = 0xf3;
+ }
+
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ muxVal = (twsiVal & muxValMask) | muxVal;
+
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+ {
+ mvOsPrintf("Board: twsi exp out val fail\n");
+ return;
+ }
+ DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+
+ mvOsDelay(20);
+
+ /* set the line to 1 */
+ twsiSlave.offset = 3;
+ muxVal = 1;
+ muxValMask = 1;
+
+ if(mvBoardIdGet() == RD_88F6281A_ID)
+ {
+ muxVal = 0xc;
+ muxValMask = 0xf3;
+ if(chType) /* FXS - issue reset properly */
+ {
+ MV_REG_BIT_SET(GPP_DATA_OUT_REG(1), MV_GPP12);
+ mvOsDelay(50);
+ MV_REG_BIT_RESET(GPP_DATA_OUT_REG(1), MV_GPP12);
+ }
+ else /* FXO - issue reset via TDM_CODEC_RST*/
+ {
+ /* change MPP44 type to TDM_CODEC_RST(0x2) */
+ MV_REG_WRITE(MPP_CONTROL_REG5, ((MV_REG_READ(MPP_CONTROL_REG5) & 0xFFF0FFFF) | BIT17));
+ }
+ }
+
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ muxVal = (twsiVal & muxValMask) | muxVal;
+
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+ {
+ mvOsPrintf("Board: twsi exp out val fail\n");
+ return;
+ }
+
+ /* TBD - 5 channels */
+#if defined(MV_TDM_5CHANNELS)
+ /* change MPP38 type to GPIO(0x0) & polarity for TDM_STROBE */
+ MV_REG_WRITE(MPP_CONTROL_REG4, (MV_REG_READ(MPP_CONTROL_REG4) & 0xF0FFFFFF));
+ mvGppPolaritySet(1, MV_GPP6, 0);
+
+ twsiSlave.offset = 6;
+ twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(2);
+
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ muxVal = (twsiVal & ~BIT2);
+
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+ {
+ mvOsPrintf("Board: twsi exp change to out fail\n");
+ return;
+ }
+
+
+ twsiSlave.offset = 2;
+
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ muxVal = (twsiVal & ~BIT2);
+
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+ {
+ mvOsPrintf("Board: twsi exp change to out fail\n");
+ return;
+ }
+#endif
+ DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+
+
+}
+/*******************************************************************************
+* mvBoardVoiceConnModeGet - return SLIC/DAA connection & interrupt modes
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*******************************************************************************/
+
+MV_VOID mvBoardVoiceConnModeGet(MV_32* connMode, MV_32* irqMode)
+{
+ switch(mvBoardIdGet())
+ {
+ case RD_88F6281A_ID:
+ *connMode = DAISY_CHAIN_MODE;
+ *irqMode = INTERRUPT_TO_TDM;
+ break;
+ case DB_88F6281A_BP_ID:
+ *connMode = DUAL_CHIP_SELECT_MODE;
+ *irqMode = INTERRUPT_TO_TDM;
+ break;
+ case RD_88F6192A_ID:
+ *connMode = DUAL_CHIP_SELECT_MODE;
+ *irqMode = INTERRUPT_TO_TDM;
+ break;
+ case DB_88F6192A_BP_ID:
+ *connMode = DUAL_CHIP_SELECT_MODE;
+ *irqMode = INTERRUPT_TO_TDM;
+ break;
+ default:
+ *connMode = *irqMode = -1;
+ mvOsPrintf("mvBoardVoiceAssembleModeGet: TDM not supported(boardId=0x%x)\n",mvBoardIdGet());
+ }
+ return;
+
+}
+
+/*******************************************************************************
+* mvBoardMppModuleTypePrint - print module detect
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvBoardMppModuleTypePrint(MV_VOID)
+{
+
+ MV_BOARD_MPP_GROUP_CLASS devClass;
+ MV_BOARD_MPP_TYPE_CLASS mppGroupType;
+ MV_U32 devId;
+ MV_U32 maxMppGrp = 1;
+
+ devId = mvCtrlModelGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ maxMppGrp = MV_6281_MPP_MAX_MODULE;
+ break;
+ case MV_6192_DEV_ID:
+ maxMppGrp = MV_6192_MPP_MAX_MODULE;
+ break;
+ case MV_6190_DEV_ID:
+ maxMppGrp = MV_6190_MPP_MAX_MODULE;
+ break;
+ case MV_6180_DEV_ID:
+ maxMppGrp = MV_6180_MPP_MAX_MODULE;
+ break;
+ }
+
+ for (devClass = 0; devClass < maxMppGrp; devClass++)
+ {
+ mppGroupType = mvBoardMppGroupTypeGet(devClass);
+
+ switch(mppGroupType)
+ {
+ case MV_BOARD_TDM:
+ if(devId != MV_6190_DEV_ID)
+ mvOsPrintf("Module %d is TDM\n", devClass);
+ break;
+ case MV_BOARD_AUDIO:
+ if(devId != MV_6190_DEV_ID)
+ mvOsPrintf("Module %d is AUDIO\n", devClass);
+ break;
+ case MV_BOARD_RGMII:
+ if(devId != MV_6190_DEV_ID)
+ mvOsPrintf("Module %d is RGMII\n", devClass);
+ break;
+ case MV_BOARD_GMII:
+ if(devId != MV_6190_DEV_ID)
+ mvOsPrintf("Module %d is GMII\n", devClass);
+ break;
+ case MV_BOARD_TS:
+ if(devId != MV_6190_DEV_ID)
+ mvOsPrintf("Module %d is TS\n", devClass);
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/* Board devices API managments */
+
+/*******************************************************************************
+* mvBoardGetDeviceNumber - Get number of device of some type on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+* devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* If the device is found on the board the then the functions returns the
+* number of those devices else the function returns 0
+*
+*
+*******************************************************************************/
+MV_32 mvBoardGetDevicesNumber(MV_BOARD_DEV_CLASS devClass)
+{
+ MV_U32 foundIndex=0,devNum;
+ MV_U32 boardId= mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("mvBoardGetDeviceNumber:Board unknown.\n");
+ return 0xFFFFFFFF;
+
+ }
+
+ for (devNum = START_DEV_CS; devNum < BOARD_INFO(boardId)->numBoardDeviceIf; devNum++)
+ {
+ if (BOARD_INFO(boardId)->pDevCsInfo[devNum].devClass == devClass)
+ {
+ foundIndex++;
+ }
+ }
+
+ return foundIndex;
+
+}
+
+/*******************************************************************************
+* mvBoardGetDeviceBaseAddr - Get base address of a device existing on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+* devIndex - The device sequential number on the board
+* devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* If the device is found on the board the then the functions returns the
+* Base address else the function returns 0xffffffff
+*
+*
+*******************************************************************************/
+MV_32 mvBoardGetDeviceBaseAddr(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+ MV_DEV_CS_INFO* devEntry;
+ devEntry = boardGetDevEntry(devNum,devClass);
+ if (devEntry != NULL)
+ {
+ return mvCpuIfTargetWinBaseLowGet(DEV_TO_TARGET(devEntry->deviceCS));
+
+ }
+
+ return 0xFFFFFFFF;
+}
+
+/*******************************************************************************
+* mvBoardGetDeviceBusWidth - Get Bus width of a device existing on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+* devIndex - The device sequential number on the board
+* devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* If the device is found on the board the then the functions returns the
+* Bus width else the function returns 0xffffffff
+*
+*
+*******************************************************************************/
+MV_32 mvBoardGetDeviceBusWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+ MV_DEV_CS_INFO* devEntry;
+
+ devEntry = boardGetDevEntry(devNum,devClass);
+ if (devEntry != NULL)
+ {
+ return 8;
+ }
+
+ return 0xFFFFFFFF;
+
+}
+
+/*******************************************************************************
+* mvBoardGetDeviceWidth - Get dev width of a device existing on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+* devIndex - The device sequential number on the board
+* devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* If the device is found on the board the then the functions returns the
+* dev width else the function returns 0xffffffff
+*
+*
+*******************************************************************************/
+MV_32 mvBoardGetDeviceWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+ MV_DEV_CS_INFO* devEntry;
+ MV_U32 boardId= mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("Board unknown.\n");
+ return 0xFFFFFFFF;
+ }
+
+ devEntry = boardGetDevEntry(devNum,devClass);
+ if (devEntry != NULL)
+ return devEntry->devWidth;
+
+ return MV_ERROR;
+
+}
+
+/*******************************************************************************
+* mvBoardGetDeviceWinSize - Get the window size of a device existing on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+* devIndex - The device sequential number on the board
+* devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* If the device is found on the board the then the functions returns the
+* window size else the function returns 0xffffffff
+*
+*
+*******************************************************************************/
+MV_32 mvBoardGetDeviceWinSize(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+ MV_DEV_CS_INFO* devEntry;
+ MV_U32 boardId = mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("Board unknown.\n");
+ return 0xFFFFFFFF;
+ }
+
+ devEntry = boardGetDevEntry(devNum,devClass);
+ if (devEntry != NULL)
+ {
+ return mvCpuIfTargetWinSizeGet(DEV_TO_TARGET(devEntry->deviceCS));
+ }
+
+ return 0xFFFFFFFF;
+}
+
+
+/*******************************************************************************
+* boardGetDevEntry - returns the entry pointer of a device on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+* devIndex - The device sequential number on the board
+* devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* If the device is found on the board the then the functions returns the
+* dev number else the function returns 0x0
+*
+*
+*******************************************************************************/
+static MV_DEV_CS_INFO* boardGetDevEntry(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+ MV_U32 foundIndex=0,devIndex;
+ MV_U32 boardId= mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("boardGetDevEntry: Board unknown.\n");
+ return NULL;
+
+ }
+
+ for (devIndex = START_DEV_CS; devIndex < BOARD_INFO(boardId)->numBoardDeviceIf; devIndex++)
+ {
+ /* TBR */
+ /*if (BOARD_INFO(boardId)->pDevCsInfo[devIndex].deviceCS == MV_BOOTDEVICE_INDEX)
+ continue;*/
+
+ if (BOARD_INFO(boardId)->pDevCsInfo[devIndex].devClass == devClass)
+ {
+ if (foundIndex == devNum)
+ {
+ return &(BOARD_INFO(boardId)->pDevCsInfo[devIndex]);
+ }
+ foundIndex++;
+ }
+ }
+
+ /* device not found */
+ return NULL;
+}
+
+/* Get device CS number */
+
+MV_U32 boardGetDevCSNum(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+ MV_DEV_CS_INFO* devEntry;
+ MV_U32 boardId= mvBoardIdGet();
+
+ if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+ {
+ mvOsPrintf("Board unknown.\n");
+ return 0xFFFFFFFF;
+
+ }
+
+
+ devEntry = boardGetDevEntry(devNum,devClass);
+ if (devEntry != NULL)
+ return devEntry->deviceCS;
+
+ return 0xFFFFFFFF;
+
+}
+
+/*******************************************************************************
+* mvBoardRtcTwsiAddrTypeGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardRtcTwsiAddrTypeGet()
+{
+ int i;
+ MV_U32 boardId= mvBoardIdGet();
+
+ for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+ if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_RTC)
+ return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType;
+ return (MV_ERROR);
+}
+
+/*******************************************************************************
+* mvBoardRtcTwsiAddrGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardRtcTwsiAddrGet()
+{
+ int i;
+ MV_U32 boardId= mvBoardIdGet();
+
+ for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+ if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_RTC)
+ return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr;
+ return (0xFF);
+}
+
+/*******************************************************************************
+* mvBoardA2DTwsiAddrTypeGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardA2DTwsiAddrTypeGet()
+{
+ int i;
+ MV_U32 boardId= mvBoardIdGet();
+
+ for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+ if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_AUDIO_DEC)
+ return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType;
+ return (MV_ERROR);
+}
+
+/*******************************************************************************
+* mvBoardA2DTwsiAddrGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardA2DTwsiAddrGet()
+{
+ int i;
+ MV_U32 boardId= mvBoardIdGet();
+
+ for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+ if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_AUDIO_DEC)
+ return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr;
+ return (0xFF);
+}
+
+/*******************************************************************************
+* mvBoardTwsiExpAddrTypeGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardTwsiExpAddrTypeGet(MV_U32 index)
+{
+ int i;
+ MV_U32 indexFound = 0;
+ MV_U32 boardId= mvBoardIdGet();
+
+ for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+ if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_EXP)
+ {
+ if (indexFound == index)
+ return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType;
+ else
+ indexFound++;
+ }
+
+ return (MV_ERROR);
+}
+
+/*******************************************************************************
+* mvBoardTwsiExpAddrGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardTwsiExpAddrGet(MV_U32 index)
+{
+ int i;
+ MV_U32 indexFound = 0;
+ MV_U32 boardId= mvBoardIdGet();
+
+ for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+ if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_EXP)
+ {
+ if (indexFound == index)
+ return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr;
+ else
+ indexFound++;
+ }
+
+ return (0xFF);
+}
+
+
+/*******************************************************************************
+* mvBoardTwsiSatRAddrTypeGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardTwsiSatRAddrTypeGet(MV_U32 index)
+{
+ int i;
+ MV_U32 indexFound = 0;
+ MV_U32 boardId= mvBoardIdGet();
+
+ for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+ if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_SATR)
+ {
+ if (indexFound == index)
+ return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType;
+ else
+ indexFound++;
+ }
+
+ return (MV_ERROR);
+}
+
+/*******************************************************************************
+* mvBoardTwsiSatRAddrGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardTwsiSatRAddrGet(MV_U32 index)
+{
+ int i;
+ MV_U32 indexFound = 0;
+ MV_U32 boardId= mvBoardIdGet();
+
+ for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+ if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_SATR)
+ {
+ if (indexFound == index)
+ return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr;
+ else
+ indexFound++;
+ }
+
+ return (0xFF);
+}
+
+/*******************************************************************************
+* mvBoardNandWidthGet -
+*
+* DESCRIPTION: Get the width of the first NAND device in byte.
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN: 1, 2, 4 or MV_ERROR
+*
+*
+*******************************************************************************/
+/* */
+MV_32 mvBoardNandWidthGet(void)
+{
+ MV_U32 devNum;
+ MV_U32 devWidth;
+ MV_U32 boardId= mvBoardIdGet();
+
+ for (devNum = START_DEV_CS; devNum < BOARD_INFO(boardId)->numBoardDeviceIf; devNum++)
+ {
+ devWidth = mvBoardGetDeviceWidth(devNum, BOARD_DEV_NAND_FLASH);
+ if (devWidth != MV_ERROR)
+ return (devWidth / 8);
+ }
+
+ /* NAND wasn't found */
+ return MV_ERROR;
+}
+
+MV_U32 gBoardId = -1;
+
+/*******************************************************************************
+* mvBoardIdGet - Get Board model
+*
+* DESCRIPTION:
+* This function returns board ID.
+* Board ID is 32bit word constructed of board model (16bit) and
+* board revision (16bit) in the following way: 0xMMMMRRRR.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit board ID number, '-1' if board is undefined.
+*
+*******************************************************************************/
+MV_U32 mvBoardIdGet(MV_VOID)
+{
+ MV_U32 tmpBoardId = -1;
+
+ if(gBoardId == -1)
+ {
+ #if defined(DB_88F6281A)
+ tmpBoardId = DB_88F6281A_BP_ID;
+ #elif defined(RD_88F6281A)
+ tmpBoardId = RD_88F6281A_ID;
+ #elif defined(DB_88F6192A)
+ tmpBoardId = DB_88F6192A_BP_ID;
+ #elif defined(DB_88F6190A)
+ tmpBoardId = DB_88F6190A_BP_ID;
+ #elif defined(RD_88F6192A)
+ tmpBoardId = RD_88F6192A_ID;
+ #elif defined(RD_88F6190A)
+ tmpBoardId = RD_88F6190A_ID;
+ #elif defined(DB_88F6180A)
+ tmpBoardId = DB_88F6180A_BP_ID;
+ #elif defined(RD_88F6281A_PCAC)
+ tmpBoardId = RD_88F6281A_PCAC_ID;
+ #elif defined(RD_88F6281A_SHEEVA_PLUG)
+ tmpBoardId = SHEEVA_PLUG_ID;
+ #elif defined(DB_CUSTOMER)
+ tmpBoardId = DB_CUSTOMER_ID;
+ #endif
+ gBoardId = tmpBoardId;
+ }
+
+ return gBoardId;
+}
+
+
+/*******************************************************************************
+* mvBoarModuleTypeGet - mvBoarModuleTypeGet
+*
+* DESCRIPTION:
+*
+* INPUT:
+* group num - MV_BOARD_MPP_GROUP_CLASS enum
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* module num - MV_BOARD_MODULE_CLASS enum
+*
+*******************************************************************************/
+MV_BOARD_MODULE_ID_CLASS mvBoarModuleTypeGet(MV_BOARD_MPP_GROUP_CLASS devClass)
+{
+ MV_TWSI_SLAVE twsiSlave;
+ MV_TWSI_ADDR slave;
+ MV_U8 data;
+
+ /* TWSI init */
+ slave.type = ADDR7_BIT;
+ slave.address = 0;
+ mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+ /* Read MPP module ID */
+ DB(mvOsPrintf("Board: Read MPP module ID\n"));
+ twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(devClass);
+ twsiSlave.slaveAddr.type = mvBoardTwsiExpAddrTypeGet(devClass);
+ twsiSlave.validOffset = MV_TRUE;
+ /* Offset is the first command after the address which indicate the register number to be read
+ in next operation */
+ twsiSlave.offset = 0;
+ twsiSlave.moreThen256 = MV_FALSE;
+
+
+
+ if( MV_OK != mvTwsiRead (0, &twsiSlave, &data, 1) )
+ {
+ DB(mvOsPrintf("Board: Read MPP module ID fail\n"));
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Board: Read MPP module ID succeded\n"));
+
+ return data;
+}
+
+/*******************************************************************************
+* mvBoarTwsiSatRGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+* device num - one of three devices
+* reg num - 0 or 1
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* reg value
+*
+*******************************************************************************/
+MV_U8 mvBoarTwsiSatRGet(MV_U8 devNum, MV_U8 regNum)
+{
+ MV_TWSI_SLAVE twsiSlave;
+ MV_TWSI_ADDR slave;
+ MV_U8 data;
+
+ /* TWSI init */
+ slave.type = ADDR7_BIT;
+ slave.address = 0;
+ mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+ /* Read MPP module ID */
+ DB(mvOsPrintf("Board: Read S@R device read\n"));
+ twsiSlave.slaveAddr.address = mvBoardTwsiSatRAddrGet(devNum);
+ twsiSlave.slaveAddr.type = mvBoardTwsiSatRAddrTypeGet(devNum);
+ twsiSlave.validOffset = MV_TRUE;
+ /* Use offset as command */
+ twsiSlave.offset = regNum;
+ twsiSlave.moreThen256 = MV_FALSE;
+
+ if( MV_OK != mvTwsiRead (0, &twsiSlave, &data, 1) )
+ {
+ DB(mvOsPrintf("Board: Read S@R fail\n"));
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Board: Read S@R succeded\n"));
+
+ return data;
+}
+
+/*******************************************************************************
+* mvBoarTwsiSatRSet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+* devNum - one of three devices
+* regNum - 0 or 1
+* regVal - value
+*
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* reg value
+*
+*******************************************************************************/
+MV_STATUS mvBoarTwsiSatRSet(MV_U8 devNum, MV_U8 regNum, MV_U8 regVal)
+{
+ MV_TWSI_SLAVE twsiSlave;
+ MV_TWSI_ADDR slave;
+
+ /* TWSI init */
+ slave.type = ADDR7_BIT;
+ slave.address = 0;
+ mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+ /* Read MPP module ID */
+ twsiSlave.slaveAddr.address = mvBoardTwsiSatRAddrGet(devNum);
+ twsiSlave.slaveAddr.type = mvBoardTwsiSatRAddrTypeGet(devNum);
+ twsiSlave.validOffset = MV_TRUE;
+ DB(mvOsPrintf("Board: Write S@R device addr %x, type %x, data %x\n", twsiSlave.slaveAddr.address,\
+ twsiSlave.slaveAddr.type, regVal));
+ /* Use offset as command */
+ twsiSlave.offset = regNum;
+ twsiSlave.moreThen256 = MV_FALSE;
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, ®Val, 1) )
+ {
+ DB(mvOsPrintf("Board: Write S@R fail\n"));
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Board: Write S@R succeded\n"));
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvBoardSlicGpioPinGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_32 mvBoardSlicGpioPinGet(MV_U32 slicNum)
+{
+ MV_U32 boardId;
+ boardId = mvBoardIdGet();
+
+ switch (boardId)
+ {
+ case DB_88F6281A_BP_ID:
+ case RD_88F6281A_ID:
+ default:
+ return MV_ERROR;
+ break;
+
+ }
+}
+
+/*******************************************************************************
+* mvBoardFanPowerControl - Turn on/off the fan power control on the RD-6281A
+*
+* DESCRIPTION:
+*
+* INPUT:
+* mode - MV_TRUE = on ; MV_FALSE = off
+*
+* OUTPUT:
+* MV_STATUS - MV_OK , MV_ERROR.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_STATUS mvBoardFanPowerControl(MV_BOOL mode)
+{
+
+ MV_U8 val = 1, twsiVal;
+ MV_TWSI_SLAVE twsiSlave;
+ MV_TWSI_ADDR slave;
+
+ if(mvBoardIdGet() != RD_88F6281A_ID)
+ return MV_ERROR;
+
+ /* TWSI init */
+ slave.type = ADDR7_BIT;
+ slave.address = 0;
+ mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+ /* Read MPP module ID */
+ DB(mvOsPrintf("Board: twsi exp set\n"));
+ twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(1);
+ twsiSlave.slaveAddr.type = ADDR7_BIT;
+ twsiSlave.validOffset = MV_TRUE;
+ /* Offset is the first command after the address which indicate the register number to be read
+ in next operation */
+ twsiSlave.offset = 3;
+ twsiSlave.moreThen256 = MV_FALSE;
+ if(mode == MV_TRUE)
+ val = 0x1;
+ else
+ val = 0;
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ val = (twsiVal & 0xfe) | val;
+
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+ {
+ DB(mvOsPrintf("Board: twsi exp out val fail\n"));
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+
+ /* Change twsi exp to output */
+ twsiSlave.offset = 7;
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ val = (twsiVal & 0xfe);
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+ {
+ DB(mvOsPrintf("Board: twsi exp change to out fail\n"));
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Board: twsi exp change to out succeded\n"));
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvBoardHDDPowerControl - Turn on/off the HDD power control on the RD-6281A
+*
+* DESCRIPTION:
+*
+* INPUT:
+* mode - MV_TRUE = on ; MV_FALSE = off
+*
+* OUTPUT:
+* MV_STATUS - MV_OK , MV_ERROR.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_STATUS mvBoardHDDPowerControl(MV_BOOL mode)
+{
+
+ MV_U8 val = 1, twsiVal;
+ MV_TWSI_SLAVE twsiSlave;
+ MV_TWSI_ADDR slave;
+
+ if(mvBoardIdGet() != RD_88F6281A_ID)
+ return MV_ERROR;
+
+ /* TWSI init */
+ slave.type = ADDR7_BIT;
+ slave.address = 0;
+ mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+ /* Read MPP module ID */
+ DB(mvOsPrintf("Board: twsi exp set\n"));
+ twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(1);
+ twsiSlave.slaveAddr.type = ADDR7_BIT;
+ twsiSlave.validOffset = MV_TRUE;
+ /* Offset is the first command after the address which indicate the register number to be read
+ in next operation */
+ twsiSlave.offset = 3;
+ twsiSlave.moreThen256 = MV_FALSE;
+ if(mode == MV_TRUE)
+ val = 0x2;
+ else
+ val = 0;
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ val = (twsiVal & 0xfd) | val;
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+ {
+ DB(mvOsPrintf("Board: twsi exp out val fail\n"));
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+
+ /* Change twsi exp to output */
+ twsiSlave.offset = 7;
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ val = (twsiVal & 0xfd);
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+ {
+ DB(mvOsPrintf("Board: twsi exp change to out fail\n"));
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Board: twsi exp change to out succeded\n"));
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvBoardSDioWPControl - Turn on/off the SDIO WP on the RD-6281A
+*
+* DESCRIPTION:
+*
+* INPUT:
+* mode - MV_TRUE = on ; MV_FALSE = off
+*
+* OUTPUT:
+* MV_STATUS - MV_OK , MV_ERROR.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_STATUS mvBoardSDioWPControl(MV_BOOL mode)
+{
+
+ MV_U8 val = 1, twsiVal;
+ MV_TWSI_SLAVE twsiSlave;
+ MV_TWSI_ADDR slave;
+
+ if(mvBoardIdGet() != RD_88F6281A_ID)
+ return MV_ERROR;
+
+ /* TWSI init */
+ slave.type = ADDR7_BIT;
+ slave.address = 0;
+ mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+ /* Read MPP module ID */
+ DB(mvOsPrintf("Board: twsi exp set\n"));
+ twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(0);
+ twsiSlave.slaveAddr.type = ADDR7_BIT;
+ twsiSlave.validOffset = MV_TRUE;
+ /* Offset is the first command after the address which indicate the register number to be read
+ in next operation */
+ twsiSlave.offset = 3;
+ twsiSlave.moreThen256 = MV_FALSE;
+ if(mode == MV_TRUE)
+ val = 0x10;
+ else
+ val = 0;
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ val = (twsiVal & 0xef) | val;
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+ {
+ DB(mvOsPrintf("Board: twsi exp out val fail\n"));
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+
+ /* Change twsi exp to output */
+ twsiSlave.offset = 7;
+ mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+ val = (twsiVal & 0xef);
+ if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+ {
+ DB(mvOsPrintf("Board: twsi exp change to out fail\n"));
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Board: twsi exp change to out succeded\n"));
+ return MV_OK;
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __INCmvBoardEnvLibh
+#define __INCmvBoardEnvLibh
+
+/* defines */
+/* The below constant macros defines the board I2C EEPROM data offsets */
+
+
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "mvSysHwConfig.h"
+#include "boardEnv/mvBoardEnvSpec.h"
+
+
+/* DUART stuff for Tclk detection only */
+#define DUART_BAUD_RATE 115200
+#define MAX_CLOCK_MARGINE 5000000 /* Maximum detected clock margine */
+
+/* Voice devices assembly modes */
+#define DAISY_CHAIN_MODE 1
+#define DUAL_CHIP_SELECT_MODE 0
+#define INTERRUPT_TO_MPP 1
+#define INTERRUPT_TO_TDM 0
+
+
+#define BOARD_ETH_PORT_NUM MV_ETH_MAX_PORTS
+#define BOARD_ETH_SWITCH_PORT_NUM 5
+
+#define MV_BOARD_MAX_USB_IF 1
+#define MV_BOARD_MAX_MPP 7
+#define MV_BOARD_NAME_LEN 0x20
+
+typedef struct _boardData
+{
+ MV_U32 magic;
+ MV_U16 boardId;
+ MV_U8 boardVer;
+ MV_U8 boardRev;
+ MV_U32 reserved1;
+ MV_U32 reserved2;
+
+}BOARD_DATA;
+
+typedef enum _devBoardMppGroupClass
+{
+ MV_BOARD_MPP_GROUP_1,
+ MV_BOARD_MPP_GROUP_2,
+ MV_BOARD_MAX_MPP_GROUP
+}MV_BOARD_MPP_GROUP_CLASS;
+
+typedef enum _devBoardMppTypeClass
+{
+ MV_BOARD_AUTO,
+ MV_BOARD_TDM,
+ MV_BOARD_AUDIO,
+ MV_BOARD_RGMII,
+ MV_BOARD_GMII,
+ MV_BOARD_TS,
+ MV_BOARD_MII,
+ MV_BOARD_OTHER
+}MV_BOARD_MPP_TYPE_CLASS;
+
+typedef enum _devBoardModuleIdClass
+{
+ MV_BOARD_MODULE_TDM_ID = 1,
+ MV_BOARD_MODULE_AUDIO_ID,
+ MV_BOARD_MODULE_RGMII_ID,
+ MV_BOARD_MODULE_GMII_ID,
+ MV_BOARD_MODULE_TS_ID,
+ MV_BOARD_MODULE_MII_ID,
+ MV_BOARD_MODULE_TDM_5CHAN_ID,
+ MV_BOARD_MODULE_OTHER_ID
+}MV_BOARD_MODULE_ID_CLASS;
+
+typedef struct _boardMppTypeInfo
+{
+ MV_BOARD_MPP_TYPE_CLASS boardMppGroup1;
+ MV_BOARD_MPP_TYPE_CLASS boardMppGroup2;
+
+}MV_BOARD_MPP_TYPE_INFO;
+
+
+typedef enum _devBoardClass
+{
+ BOARD_DEV_NOR_FLASH,
+ BOARD_DEV_NAND_FLASH,
+ BOARD_DEV_SEVEN_SEG,
+ BOARD_DEV_FPGA,
+ BOARD_DEV_SRAM,
+ BOARD_DEV_SPI_FLASH,
+ BOARD_DEV_OTHER,
+}MV_BOARD_DEV_CLASS;
+
+typedef enum _devTwsiBoardClass
+{
+ BOARD_TWSI_RTC,
+ BOARD_DEV_TWSI_EXP,
+ BOARD_DEV_TWSI_SATR,
+ BOARD_TWSI_AUDIO_DEC,
+ BOARD_TWSI_OTHER
+}MV_BOARD_TWSI_CLASS;
+
+typedef enum _devGppBoardClass
+{
+ BOARD_GPP_RTC,
+ BOARD_GPP_MV_SWITCH,
+ BOARD_GPP_USB_VBUS,
+ BOARD_GPP_USB_VBUS_EN,
+ BOARD_GPP_USB_OC,
+ BOARD_GPP_USB_HOST_DEVICE,
+ BOARD_GPP_REF_CLCK,
+ BOARD_GPP_VOIP_SLIC,
+ BOARD_GPP_LIFELINE,
+ BOARD_GPP_BUTTON,
+ BOARD_GPP_TS_BUTTON_C,
+ BOARD_GPP_TS_BUTTON_U,
+ BOARD_GPP_TS_BUTTON_D,
+ BOARD_GPP_TS_BUTTON_L,
+ BOARD_GPP_TS_BUTTON_R,
+ BOARD_GPP_POWER_BUTTON,
+ BOARD_GPP_RESTOR_BUTTON,
+ BOARD_GPP_WPS_BUTTON,
+ BOARD_GPP_HDD0_POWER,
+ BOARD_GPP_HDD1_POWER,
+ BOARD_GPP_FAN_POWER,
+ BOARD_GPP_RESET,
+ BOARD_GPP_POWER_ON_LED,
+ BOARD_GPP_HDD_POWER,
+ BOARD_GPP_SDIO_POWER,
+ BOARD_GPP_SDIO_DETECT,
+ BOARD_GPP_SDIO_WP,
+ BOARD_GPP_SWITCH_PHY_INT,
+ BOARD_GPP_TSU_DIRCTION,
+ BOARD_GPP_OTHER
+}MV_BOARD_GPP_CLASS;
+
+
+typedef struct _devCsInfo
+{
+ MV_U8 deviceCS;
+ MV_U32 params;
+ MV_U32 devClass; /* MV_BOARD_DEV_CLASS */
+ MV_U8 devWidth;
+
+}MV_DEV_CS_INFO;
+
+
+#define MV_BOARD_PHY_FORCE_10MB 0x0
+#define MV_BOARD_PHY_FORCE_100MB 0x1
+#define MV_BOARD_PHY_FORCE_1000MB 0x2
+#define MV_BOARD_PHY_SPEED_AUTO 0x3
+
+typedef struct _boardSwitchInfo
+{
+ MV_32 linkStatusIrq;
+ MV_32 qdPort[BOARD_ETH_SWITCH_PORT_NUM];
+ MV_32 qdCpuPort;
+ MV_32 smiScanMode; /* 1 for SMI_MANUAL_MODE, 0 otherwise */
+ MV_32 switchOnPort;
+
+}MV_BOARD_SWITCH_INFO;
+
+typedef struct _boardLedInfo
+{
+ MV_U8 activeLedsNumber;
+ MV_U8 ledsPolarity; /* '0' or '1' to turn on led */
+ MV_U8* gppPinNum; /* Pointer to GPP values */
+
+}MV_BOARD_LED_INFO;
+
+typedef struct _boardGppInfo
+{
+ MV_BOARD_GPP_CLASS devClass;
+ MV_U8 gppPinNum;
+
+}MV_BOARD_GPP_INFO;
+
+
+typedef struct _boardTwsiInfo
+{
+ MV_BOARD_TWSI_CLASS devClass;
+ MV_U8 twsiDevAddr;
+ MV_U8 twsiDevAddrType;
+
+}MV_BOARD_TWSI_INFO;
+
+
+typedef enum _boardMacSpeed
+{
+ BOARD_MAC_SPEED_10M,
+ BOARD_MAC_SPEED_100M,
+ BOARD_MAC_SPEED_1000M,
+ BOARD_MAC_SPEED_AUTO,
+
+}MV_BOARD_MAC_SPEED;
+
+typedef struct _boardMacInfo
+{
+ MV_BOARD_MAC_SPEED boardMacSpeed;
+ MV_U8 boardEthSmiAddr;
+
+}MV_BOARD_MAC_INFO;
+
+typedef struct _boardMppInfo
+{
+ MV_U32 mppGroup[MV_BOARD_MAX_MPP];
+
+}MV_BOARD_MPP_INFO;
+
+typedef struct _boardInfo
+{
+ char boardName[MV_BOARD_NAME_LEN];
+ MV_U8 numBoardMppTypeValue;
+ MV_BOARD_MPP_TYPE_INFO* pBoardMppTypeValue;
+ MV_U8 numBoardMppConfigValue;
+ MV_BOARD_MPP_INFO* pBoardMppConfigValue;
+ MV_U32 intsGppMaskLow;
+ MV_U32 intsGppMaskHigh;
+ MV_U8 numBoardDeviceIf;
+ MV_DEV_CS_INFO* pDevCsInfo;
+ MV_U8 numBoardTwsiDev;
+ MV_BOARD_TWSI_INFO* pBoardTwsiDev;
+ MV_U8 numBoardMacInfo;
+ MV_BOARD_MAC_INFO* pBoardMacInfo;
+ MV_U8 numBoardGppInfo;
+ MV_BOARD_GPP_INFO* pBoardGppInfo;
+ MV_U8 activeLedsNumber;
+ MV_U8* pLedGppPin;
+ MV_U8 ledsPolarity; /* '0' or '1' to turn on led */
+ /* GPP values */
+ MV_U32 gppOutEnValLow;
+ MV_U32 gppOutEnValHigh;
+ MV_U32 gppOutValLow;
+ MV_U32 gppOutValHigh;
+ MV_U32 gppPolarityValLow;
+ MV_U32 gppPolarityValHigh;
+
+ /* Switch Configuration */
+ MV_BOARD_SWITCH_INFO* pSwitchInfo;
+}MV_BOARD_INFO;
+
+
+
+MV_VOID mvBoardEnvInit(MV_VOID);
+MV_U32 mvBoardIdGet(MV_VOID);
+MV_U16 mvBoardModelGet(MV_VOID);
+MV_U16 mvBoardRevGet(MV_VOID);
+MV_STATUS mvBoardNameGet(char *pNameBuff);
+MV_32 mvBoardPhyAddrGet(MV_U32 ethPortNum);
+MV_BOARD_MAC_SPEED mvBoardMacSpeedGet(MV_U32 ethPortNum);
+MV_32 mvBoardLinkStatusIrqGet(MV_U32 ethPortNum);
+MV_32 mvBoardSwitchPortGet(MV_U32 ethPortNum, MV_U8 boardPortNum);
+MV_32 mvBoardSwitchCpuPortGet(MV_U32 ethPortNum);
+MV_32 mvBoardIsSwitchConnected(MV_U32 ethPortNum);
+MV_32 mvBoardSmiScanModeGet(MV_U32 ethPortNum);
+MV_BOOL mvBoardIsPortInSgmii(MV_U32 ethPortNum);
+MV_BOOL mvBoardIsPortInGmii(MV_VOID);
+MV_U32 mvBoardTclkGet(MV_VOID);
+MV_U32 mvBoardSysClkGet(MV_VOID);
+MV_U32 mvBoardDebugLedNumGet(MV_U32 boardId);
+MV_VOID mvBoardDebugLed(MV_U32 hexNum);
+MV_32 mvBoardMppGet(MV_U32 mppGroupNum);
+
+MV_U8 mvBoardRtcTwsiAddrTypeGet(MV_VOID);
+MV_U8 mvBoardRtcTwsiAddrGet(MV_VOID);
+
+MV_U8 mvBoardA2DTwsiAddrTypeGet(MV_VOID);
+MV_U8 mvBoardA2DTwsiAddrGet(MV_VOID);
+
+MV_U8 mvBoardTwsiExpAddrGet(MV_U32 index);
+MV_U8 mvBoardTwsiSatRAddrTypeGet(MV_U32 index);
+MV_U8 mvBoardTwsiSatRAddrGet(MV_U32 index);
+MV_U8 mvBoardTwsiExpAddrTypeGet(MV_U32 index);
+MV_BOARD_MODULE_ID_CLASS mvBoarModuleTypeGet(MV_BOARD_MPP_GROUP_CLASS devClass);
+MV_BOARD_MPP_TYPE_CLASS mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass);
+MV_VOID mvBoardMppGroupTypeSet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass,
+ MV_BOARD_MPP_TYPE_CLASS mppGroupType);
+MV_VOID mvBoardMppGroupIdUpdate(MV_VOID);
+MV_VOID mvBoardMppMuxSet(MV_VOID);
+MV_VOID mvBoardTdmMppSet(MV_32 chType);
+MV_VOID mvBoardVoiceConnModeGet(MV_32* connMode, MV_32* irqMode);
+
+MV_VOID mvBoardMppModuleTypePrint(MV_VOID);
+MV_VOID mvBoardReset(MV_VOID);
+MV_U8 mvBoarTwsiSatRGet(MV_U8 devNum, MV_U8 regNum);
+MV_STATUS mvBoarTwsiSatRSet(MV_U8 devNum, MV_U8 regNum, MV_U8 regVal);
+MV_BOOL mvBoardSpecInitGet(MV_U32* regOff, MV_U32* data);
+/* Board devices API managments */
+MV_32 mvBoardGetDevicesNumber(MV_BOARD_DEV_CLASS devClass);
+MV_32 mvBoardGetDeviceBaseAddr(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+MV_32 mvBoardGetDeviceBusWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+MV_32 mvBoardGetDeviceWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+MV_32 mvBoardGetDeviceWinSize(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+MV_U32 boardGetDevCSNum(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+
+/* Gpio Pin Connections API */
+MV_32 mvBoardUSBVbusGpioPinGet(int devId);
+MV_32 mvBoardUSBVbusEnGpioPinGet(int devId);
+MV_U32 mvBoardPexBridgeIntPinGet(MV_U32 devNum, MV_U32 intPin);
+
+MV_32 mvBoardResetGpioPinGet(MV_VOID);
+MV_32 mvBoardRTCGpioPinGet(MV_VOID);
+MV_32 mvBoardGpioIntMaskLowGet(MV_VOID);
+MV_32 mvBoardGpioIntMaskHighGet(MV_VOID);
+MV_32 mvBoardSlicGpioPinGet(MV_U32 slicNum);
+
+MV_32 mvBoardSDIOGpioPinGet(MV_VOID);
+MV_STATUS mvBoardSDioWPControl(MV_BOOL mode);
+MV_32 mvBoarGpioPinNumGet(MV_BOARD_GPP_CLASS class, MV_U32 index);
+
+MV_32 mvBoardNandWidthGet(void);
+MV_STATUS mvBoardFanPowerControl(MV_BOOL mode);
+MV_STATUS mvBoardHDDPowerControl(MV_BOOL mode);
+#endif /* __INCmvBoardEnvLibh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#include "mvCommon.h"
+#include "mvBoardEnvLib.h"
+#include "mvBoardEnvSpec.h"
+#include "twsi/mvTwsi.h"
+
+#define DB_88F6281A_BOARD_PCI_IF_NUM 0x0
+#define DB_88F6281A_BOARD_TWSI_DEF_NUM 0x7
+#define DB_88F6281A_BOARD_MAC_INFO_NUM 0x2
+#define DB_88F6281A_BOARD_GPP_INFO_NUM 0x3
+#define DB_88F6281A_BOARD_MPP_CONFIG_NUM 0x1
+#define DB_88F6281A_BOARD_MPP_GROUP_TYPE_NUM 0x1
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+ #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+ #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x2
+#else
+ #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1
+#endif
+#define DB_88F6281A_BOARD_DEBUG_LED_NUM 0x0
+
+
+MV_BOARD_TWSI_INFO db88f6281AInfoBoardTwsiDev[] =
+ /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */
+ {
+ {BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT},
+ {BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT},
+ {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT},
+ {BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT},
+ {BOARD_DEV_TWSI_SATR, 0x4D, ADDR7_BIT},
+ {BOARD_DEV_TWSI_SATR, 0x4E, ADDR7_BIT},
+ {BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT}
+ };
+
+MV_BOARD_MAC_INFO db88f6281AInfoBoardMacInfo[] =
+ /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+ {
+ {BOARD_MAC_SPEED_AUTO, 0x8},
+ {BOARD_MAC_SPEED_AUTO, 0x9}
+ };
+
+MV_BOARD_MPP_TYPE_INFO db88f6281AInfoBoardMppTypeInfo[] =
+ /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1,
+ MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */
+ {{MV_BOARD_AUTO, MV_BOARD_AUTO}
+ };
+
+MV_BOARD_GPP_INFO db88f6281AInfoBoardGppInfo[] =
+ /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */
+ {
+ {BOARD_GPP_TSU_DIRCTION, 33}
+ /*muxed with TDM/Audio module via IOexpender
+ {BOARD_GPP_SDIO_DETECT, 38},
+ {BOARD_GPP_USB_VBUS, 49}*/
+ };
+
+MV_DEV_CS_INFO db88f6281AInfoBoardDeCsInfo[] =
+ /*{deviceCS, params, devType, devWidth}*/
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+ {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+ {
+ {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */
+ {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */
+ };
+#else
+ {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */
+#endif
+
+MV_BOARD_MPP_INFO db88f6281AInfoBoardMppConfigValue[] =
+ {{{
+ DB_88F6281A_MPP0_7,
+ DB_88F6281A_MPP8_15,
+ DB_88F6281A_MPP16_23,
+ DB_88F6281A_MPP24_31,
+ DB_88F6281A_MPP32_39,
+ DB_88F6281A_MPP40_47,
+ DB_88F6281A_MPP48_55
+ }}};
+
+
+MV_BOARD_INFO db88f6281AInfo = {
+ "DB-88F6281A-BP", /* boardName[MAX_BOARD_NAME_LEN] */
+ DB_88F6281A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */
+ db88f6281AInfoBoardMppTypeInfo,
+ DB_88F6281A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */
+ db88f6281AInfoBoardMppConfigValue,
+ 0, /* intsGppMaskLow */
+ 0, /* intsGppMaskHigh */
+ DB_88F6281A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */
+ db88f6281AInfoBoardDeCsInfo,
+ DB_88F6281A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */
+ db88f6281AInfoBoardTwsiDev,
+ DB_88F6281A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */
+ db88f6281AInfoBoardMacInfo,
+ DB_88F6281A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */
+ db88f6281AInfoBoardGppInfo,
+ DB_88F6281A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */
+ NULL,
+ 0, /* ledsPolarity */
+ DB_88F6281A_OE_LOW, /* gppOutEnLow */
+ DB_88F6281A_OE_HIGH, /* gppOutEnHigh */
+ DB_88F6281A_OE_VAL_LOW, /* gppOutValLow */
+ DB_88F6281A_OE_VAL_HIGH, /* gppOutValHigh */
+ 0, /* gppPolarityValLow */
+ BIT6, /* gppPolarityValHigh */
+ NULL /* pSwitchInfo */
+};
+
+
+#define RD_88F6281A_BOARD_PCI_IF_NUM 0x0
+#define RD_88F6281A_BOARD_TWSI_DEF_NUM 0x2
+#define RD_88F6281A_BOARD_MAC_INFO_NUM 0x2
+#define RD_88F6281A_BOARD_GPP_INFO_NUM 0x5
+#define RD_88F6281A_BOARD_MPP_GROUP_TYPE_NUM 0x1
+#define RD_88F6281A_BOARD_MPP_CONFIG_NUM 0x1
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+ #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+ #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x2
+#else
+ #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1
+#endif
+#define RD_88F6281A_BOARD_DEBUG_LED_NUM 0x0
+
+MV_BOARD_MAC_INFO rd88f6281AInfoBoardMacInfo[] =
+ /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+ {{BOARD_MAC_SPEED_1000M, 0xa},
+ {BOARD_MAC_SPEED_AUTO, 0xb}
+ };
+
+MV_BOARD_SWITCH_INFO rd88f6281AInfoBoardSwitchInfo[] =
+ /* MV_32 linkStatusIrq, {MV_32 qdPort0, MV_32 qdPort1, MV_32 qdPort2, MV_32 qdPort3, MV_32 qdPort4},
+ MV_32 qdCpuPort, MV_32 smiScanMode, MV_32 switchOnPort} */
+ {{38, {0, 1, 2, 3, -1}, 5, 2, 0},
+ {-1, {-1}, -1, -1, -1}};
+
+MV_BOARD_TWSI_INFO rd88f6281AInfoBoardTwsiDev[] =
+ /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */
+ {
+ {BOARD_DEV_TWSI_EXP, 0xFF, ADDR7_BIT}, /* dummy entry to align with modules indexes */
+ {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT}
+ };
+
+MV_BOARD_MPP_TYPE_INFO rd88f6281AInfoBoardMppTypeInfo[] =
+ {{MV_BOARD_RGMII, MV_BOARD_TDM}
+ };
+
+MV_DEV_CS_INFO rd88f6281AInfoBoardDeCsInfo[] =
+ /*{deviceCS, params, devType, devWidth}*/
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+ {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+ {
+ {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */
+ {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */
+ };
+#else
+ {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */
+#endif
+
+MV_BOARD_GPP_INFO rd88f6281AInfoBoardGppInfo[] =
+ /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */
+ {{BOARD_GPP_SDIO_DETECT, 28},
+ {BOARD_GPP_USB_OC, 29},
+ {BOARD_GPP_WPS_BUTTON, 35},
+ {BOARD_GPP_MV_SWITCH, 38},
+ {BOARD_GPP_USB_VBUS, 49}
+ };
+
+MV_BOARD_MPP_INFO rd88f6281AInfoBoardMppConfigValue[] =
+ {{{
+ RD_88F6281A_MPP0_7,
+ RD_88F6281A_MPP8_15,
+ RD_88F6281A_MPP16_23,
+ RD_88F6281A_MPP24_31,
+ RD_88F6281A_MPP32_39,
+ RD_88F6281A_MPP40_47,
+ RD_88F6281A_MPP48_55
+ }}};
+
+MV_BOARD_INFO rd88f6281AInfo = {
+ "RD-88F6281A", /* boardName[MAX_BOARD_NAME_LEN] */
+ RD_88F6281A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */
+ rd88f6281AInfoBoardMppTypeInfo,
+ RD_88F6281A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */
+ rd88f6281AInfoBoardMppConfigValue,
+ 0, /* intsGppMaskLow */
+ (1 << 3), /* intsGppMaskHigh */
+ RD_88F6281A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */
+ rd88f6281AInfoBoardDeCsInfo,
+ RD_88F6281A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */
+ rd88f6281AInfoBoardTwsiDev,
+ RD_88F6281A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */
+ rd88f6281AInfoBoardMacInfo,
+ RD_88F6281A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */
+ rd88f6281AInfoBoardGppInfo,
+ RD_88F6281A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */
+ NULL,
+ 0, /* ledsPolarity */
+ RD_88F6281A_OE_LOW, /* gppOutEnLow */
+ RD_88F6281A_OE_HIGH, /* gppOutEnHigh */
+ RD_88F6281A_OE_VAL_LOW, /* gppOutValLow */
+ RD_88F6281A_OE_VAL_HIGH, /* gppOutValHigh */
+ 0, /* gppPolarityValLow */
+ BIT6, /* gppPolarityValHigh */
+ rd88f6281AInfoBoardSwitchInfo /* pSwitchInfo */
+};
+
+
+#define DB_88F6192A_BOARD_PCI_IF_NUM 0x0
+#define DB_88F6192A_BOARD_TWSI_DEF_NUM 0x7
+#define DB_88F6192A_BOARD_MAC_INFO_NUM 0x2
+#define DB_88F6192A_BOARD_GPP_INFO_NUM 0x3
+#define DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM 0x1
+#define DB_88F6192A_BOARD_MPP_CONFIG_NUM 0x1
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+ #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x1
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+ #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x2
+#else
+ #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x1
+#endif
+#define DB_88F6192A_BOARD_DEBUG_LED_NUM 0x0
+
+MV_BOARD_TWSI_INFO db88f6192AInfoBoardTwsiDev[] =
+ /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */
+ {
+ {BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT},
+ {BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT},
+ {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT},
+ {BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT},
+ {BOARD_DEV_TWSI_SATR, 0x4D, ADDR7_BIT},
+ {BOARD_DEV_TWSI_SATR, 0x4E, ADDR7_BIT},
+ {BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT}
+ };
+
+MV_BOARD_MAC_INFO db88f6192AInfoBoardMacInfo[] =
+ /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+ {
+ {BOARD_MAC_SPEED_AUTO, 0x8},
+ {BOARD_MAC_SPEED_AUTO, 0x9}
+ };
+
+MV_BOARD_MPP_TYPE_INFO db88f6192AInfoBoardMppTypeInfo[] =
+ /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1,
+ MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */
+ {{MV_BOARD_AUTO, MV_BOARD_OTHER}
+ };
+
+MV_DEV_CS_INFO db88f6192AInfoBoardDeCsInfo[] =
+ /*{deviceCS, params, devType, devWidth}*/
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+ {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+ {
+ {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */
+ {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */
+ };
+#else
+ {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */
+#endif
+
+MV_BOARD_GPP_INFO db88f6192AInfoBoardGppInfo[] =
+ /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */
+ {
+ {BOARD_GPP_SDIO_WP, 20},
+ {BOARD_GPP_USB_VBUS, 22},
+ {BOARD_GPP_SDIO_DETECT, 23},
+ };
+
+MV_BOARD_MPP_INFO db88f6192AInfoBoardMppConfigValue[] =
+ {{{
+ DB_88F6192A_MPP0_7,
+ DB_88F6192A_MPP8_15,
+ DB_88F6192A_MPP16_23,
+ DB_88F6192A_MPP24_31,
+ DB_88F6192A_MPP32_35
+ }}};
+
+MV_BOARD_INFO db88f6192AInfo = {
+ "DB-88F6192A-BP", /* boardName[MAX_BOARD_NAME_LEN] */
+ DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */
+ db88f6192AInfoBoardMppTypeInfo,
+ DB_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */
+ db88f6192AInfoBoardMppConfigValue,
+ 0, /* intsGppMaskLow */
+ (1 << 3), /* intsGppMaskHigh */
+ DB_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */
+ db88f6192AInfoBoardDeCsInfo,
+ DB_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */
+ db88f6192AInfoBoardTwsiDev,
+ DB_88F6192A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */
+ db88f6192AInfoBoardMacInfo,
+ DB_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */
+ db88f6192AInfoBoardGppInfo,
+ DB_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */
+ NULL,
+ 0, /* ledsPolarity */
+ DB_88F6192A_OE_LOW, /* gppOutEnLow */
+ DB_88F6192A_OE_HIGH, /* gppOutEnHigh */
+ DB_88F6192A_OE_VAL_LOW, /* gppOutValLow */
+ DB_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */
+ 0, /* gppPolarityValLow */
+ 0, /* gppPolarityValHigh */
+ NULL /* pSwitchInfo */
+};
+
+#define DB_88F6190A_BOARD_MAC_INFO_NUM 0x1
+
+MV_BOARD_INFO db88f6190AInfo = {
+ "DB-88F6190A-BP", /* boardName[MAX_BOARD_NAME_LEN] */
+ DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */
+ db88f6192AInfoBoardMppTypeInfo,
+ DB_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */
+ db88f6192AInfoBoardMppConfigValue,
+ 0, /* intsGppMaskLow */
+ (1 << 3), /* intsGppMaskHigh */
+ DB_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */
+ db88f6192AInfoBoardDeCsInfo,
+ DB_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */
+ db88f6192AInfoBoardTwsiDev,
+ DB_88F6190A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */
+ db88f6192AInfoBoardMacInfo,
+ DB_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */
+ db88f6192AInfoBoardGppInfo,
+ DB_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */
+ NULL,
+ 0, /* ledsPolarity */
+ DB_88F6192A_OE_LOW, /* gppOutEnLow */
+ DB_88F6192A_OE_HIGH, /* gppOutEnHigh */
+ DB_88F6192A_OE_VAL_LOW, /* gppOutValLow */
+ DB_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */
+ 0, /* gppPolarityValLow */
+ 0, /* gppPolarityValHigh */
+ NULL /* pSwitchInfo */
+};
+
+#define RD_88F6192A_BOARD_PCI_IF_NUM 0x0
+#define RD_88F6192A_BOARD_TWSI_DEF_NUM 0x0
+#define RD_88F6192A_BOARD_MAC_INFO_NUM 0x1
+#define RD_88F6192A_BOARD_GPP_INFO_NUM 0xE
+#define RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM 0x1
+#define RD_88F6192A_BOARD_MPP_CONFIG_NUM 0x1
+#define RD_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x1
+#define RD_88F6192A_BOARD_DEBUG_LED_NUM 0x3
+
+MV_U8 rd88f6192AInfoBoardDebugLedIf[] =
+ {17, 28, 29};
+
+MV_BOARD_MAC_INFO rd88f6192AInfoBoardMacInfo[] =
+ /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+ {{BOARD_MAC_SPEED_AUTO, 0x8}
+ };
+
+MV_BOARD_MPP_TYPE_INFO rd88f6192AInfoBoardMppTypeInfo[] =
+ /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1,
+ MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */
+ {{MV_BOARD_OTHER, MV_BOARD_OTHER}
+ };
+
+MV_DEV_CS_INFO rd88f6192AInfoBoardDeCsInfo[] =
+ /*{deviceCS, params, devType, devWidth}*/
+ {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */
+
+MV_BOARD_GPP_INFO rd88f6192AInfoBoardGppInfo[] =
+ /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */
+ {
+ {BOARD_GPP_USB_VBUS_EN, 10},
+ {BOARD_GPP_USB_HOST_DEVICE, 11},
+ {BOARD_GPP_RESET, 14},
+ {BOARD_GPP_POWER_ON_LED, 15},
+ {BOARD_GPP_HDD_POWER, 16},
+ {BOARD_GPP_WPS_BUTTON, 24},
+ {BOARD_GPP_TS_BUTTON_C, 25},
+ {BOARD_GPP_USB_VBUS, 26},
+ {BOARD_GPP_USB_OC, 27},
+ {BOARD_GPP_TS_BUTTON_U, 30},
+ {BOARD_GPP_TS_BUTTON_R, 31},
+ {BOARD_GPP_TS_BUTTON_L, 32},
+ {BOARD_GPP_TS_BUTTON_D, 34},
+ {BOARD_GPP_FAN_POWER, 35}
+ };
+
+MV_BOARD_MPP_INFO rd88f6192AInfoBoardMppConfigValue[] =
+ {{{
+ RD_88F6192A_MPP0_7,
+ RD_88F6192A_MPP8_15,
+ RD_88F6192A_MPP16_23,
+ RD_88F6192A_MPP24_31,
+ RD_88F6192A_MPP32_35
+ }}};
+
+MV_BOARD_INFO rd88f6192AInfo = {
+ "RD-88F6192A-NAS", /* boardName[MAX_BOARD_NAME_LEN] */
+ RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */
+ rd88f6192AInfoBoardMppTypeInfo,
+ RD_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */
+ rd88f6192AInfoBoardMppConfigValue,
+ 0, /* intsGppMaskLow */
+ (1 << 3), /* intsGppMaskHigh */
+ RD_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */
+ rd88f6192AInfoBoardDeCsInfo,
+ RD_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */
+ NULL,
+ RD_88F6192A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */
+ rd88f6192AInfoBoardMacInfo,
+ RD_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */
+ rd88f6192AInfoBoardGppInfo,
+ RD_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */
+ rd88f6192AInfoBoardDebugLedIf,
+ 0, /* ledsPolarity */
+ RD_88F6192A_OE_LOW, /* gppOutEnLow */
+ RD_88F6192A_OE_HIGH, /* gppOutEnHigh */
+ RD_88F6192A_OE_VAL_LOW, /* gppOutValLow */
+ RD_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */
+ 0, /* gppPolarityValLow */
+ 0, /* gppPolarityValHigh */
+ NULL /* pSwitchInfo */
+};
+
+MV_BOARD_INFO rd88f6190AInfo = {
+ "RD-88F6190A-NAS", /* boardName[MAX_BOARD_NAME_LEN] */
+ RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */
+ rd88f6192AInfoBoardMppTypeInfo,
+ RD_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */
+ rd88f6192AInfoBoardMppConfigValue,
+ 0, /* intsGppMaskLow */
+ (1 << 3), /* intsGppMaskHigh */
+ RD_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */
+ rd88f6192AInfoBoardDeCsInfo,
+ RD_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */
+ NULL,
+ RD_88F6192A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */
+ rd88f6192AInfoBoardMacInfo,
+ RD_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */
+ rd88f6192AInfoBoardGppInfo,
+ RD_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */
+ rd88f6192AInfoBoardDebugLedIf,
+ 0, /* ledsPolarity */
+ RD_88F6192A_OE_LOW, /* gppOutEnLow */
+ RD_88F6192A_OE_HIGH, /* gppOutEnHigh */
+ RD_88F6192A_OE_VAL_LOW, /* gppOutValLow */
+ RD_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */
+ 0, /* gppPolarityValLow */
+ 0, /* gppPolarityValHigh */
+ NULL /* pSwitchInfo */
+};
+
+#define DB_88F6180A_BOARD_PCI_IF_NUM 0x0
+#define DB_88F6180A_BOARD_TWSI_DEF_NUM 0x5
+#define DB_88F6180A_BOARD_MAC_INFO_NUM 0x1
+#define DB_88F6180A_BOARD_GPP_INFO_NUM 0x0
+#define DB_88F6180A_BOARD_MPP_GROUP_TYPE_NUM 0x2
+#define DB_88F6180A_BOARD_MPP_CONFIG_NUM 0x1
+#define DB_88F6180A_BOARD_DEVICE_CONFIG_NUM 0x1
+#define DB_88F6180A_BOARD_DEBUG_LED_NUM 0x0
+
+MV_BOARD_TWSI_INFO db88f6180AInfoBoardTwsiDev[] =
+ /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */
+ {
+ {BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT},
+ {BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT},
+ {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT},
+ {BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT},
+ {BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT}
+ };
+
+MV_BOARD_MAC_INFO db88f6180AInfoBoardMacInfo[] =
+ /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+ {{BOARD_MAC_SPEED_AUTO, 0x8}
+ };
+
+MV_BOARD_GPP_INFO db88f6180AInfoBoardGppInfo[] =
+ /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */
+ {
+ /* Muxed with TDM/Audio module via IOexpender
+ {BOARD_GPP_USB_VBUS, 6} */
+ };
+
+MV_BOARD_MPP_TYPE_INFO db88f6180AInfoBoardMppTypeInfo[] =
+ /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1,
+ MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */
+ {{MV_BOARD_OTHER, MV_BOARD_AUTO}
+ };
+
+MV_DEV_CS_INFO db88f6180AInfoBoardDeCsInfo[] =
+ /*{deviceCS, params, devType, devWidth}*/
+#if defined(MV_NAND_BOOT)
+ {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */
+#else
+ {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */
+#endif
+
+MV_BOARD_MPP_INFO db88f6180AInfoBoardMppConfigValue[] =
+ {{{
+ DB_88F6180A_MPP0_7,
+ DB_88F6180A_MPP8_15,
+ DB_88F6180A_MPP16_23,
+ DB_88F6180A_MPP24_31,
+ DB_88F6180A_MPP32_39,
+ DB_88F6180A_MPP40_44
+ }}};
+
+MV_BOARD_INFO db88f6180AInfo = {
+ "DB-88F6180A-BP", /* boardName[MAX_BOARD_NAME_LEN] */
+ DB_88F6180A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */
+ db88f6180AInfoBoardMppTypeInfo,
+ DB_88F6180A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */
+ db88f6180AInfoBoardMppConfigValue,
+ 0, /* intsGppMaskLow */
+ 0, /* intsGppMaskHigh */
+ DB_88F6180A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */
+ db88f6180AInfoBoardDeCsInfo,
+ DB_88F6180A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */
+ db88f6180AInfoBoardTwsiDev,
+ DB_88F6180A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */
+ db88f6180AInfoBoardMacInfo,
+ DB_88F6180A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */
+ NULL,
+ DB_88F6180A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */
+ NULL,
+ 0, /* ledsPolarity */
+ DB_88F6180A_OE_LOW, /* gppOutEnLow */
+ DB_88F6180A_OE_HIGH, /* gppOutEnHigh */
+ DB_88F6180A_OE_VAL_LOW, /* gppOutValLow */
+ DB_88F6180A_OE_VAL_HIGH, /* gppOutValHigh */
+ 0, /* gppPolarityValLow */
+ 0, /* gppPolarityValHigh */
+ NULL /* pSwitchInfo */
+};
+
+
+#define RD_88F6281A_PCAC_BOARD_PCI_IF_NUM 0x0
+#define RD_88F6281A_PCAC_BOARD_TWSI_DEF_NUM 0x1
+#define RD_88F6281A_PCAC_BOARD_MAC_INFO_NUM 0x1
+#define RD_88F6281A_PCAC_BOARD_GPP_INFO_NUM 0x0
+#define RD_88F6281A_PCAC_BOARD_MPP_GROUP_TYPE_NUM 0x1
+#define RD_88F6281A_PCAC_BOARD_MPP_CONFIG_NUM 0x1
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+ #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM 0x1
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+ #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM 0x2
+#else
+ #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM 0x1
+#endif
+#define RD_88F6281A_PCAC_BOARD_DEBUG_LED_NUM 0x4
+
+MV_U8 rd88f6281APcacInfoBoardDebugLedIf[] =
+ {38, 39, 40, 41};
+
+MV_BOARD_MAC_INFO rd88f6281APcacInfoBoardMacInfo[] =
+ /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+ {{BOARD_MAC_SPEED_AUTO, 0x8}
+ };
+
+MV_BOARD_TWSI_INFO rd88f6281APcacInfoBoardTwsiDev[] =
+ /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */
+ {
+ {BOARD_TWSI_OTHER, 0xa7, ADDR7_BIT}
+ };
+
+MV_BOARD_MPP_TYPE_INFO rd88f6281APcacInfoBoardMppTypeInfo[] =
+ {{MV_BOARD_OTHER, MV_BOARD_OTHER}
+ };
+
+MV_DEV_CS_INFO rd88f6281APcacInfoBoardDeCsInfo[] =
+ /*{deviceCS, params, devType, devWidth}*/
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+ {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+ {
+ {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */
+ {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */
+ };
+#else
+ {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */
+#endif
+
+MV_BOARD_MPP_INFO rd88f6281APcacInfoBoardMppConfigValue[] =
+ {{{
+ RD_88F6281A_PCAC_MPP0_7,
+ RD_88F6281A_PCAC_MPP8_15,
+ RD_88F6281A_PCAC_MPP16_23,
+ RD_88F6281A_PCAC_MPP24_31,
+ RD_88F6281A_PCAC_MPP32_39,
+ RD_88F6281A_PCAC_MPP40_47,
+ RD_88F6281A_PCAC_MPP48_55
+ }}};
+
+MV_BOARD_INFO rd88f6281APcacInfo = {
+ "RD-88F6281A-PCAC", /* boardName[MAX_BOARD_NAME_LEN] */
+ RD_88F6281A_PCAC_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */
+ rd88f6281APcacInfoBoardMppTypeInfo,
+ RD_88F6281A_PCAC_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */
+ rd88f6281APcacInfoBoardMppConfigValue,
+ 0, /* intsGppMaskLow */
+ (1 << 3), /* intsGppMaskHigh */
+ RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */
+ rd88f6281APcacInfoBoardDeCsInfo,
+ RD_88F6281A_PCAC_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */
+ rd88f6281APcacInfoBoardTwsiDev,
+ RD_88F6281A_PCAC_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */
+ rd88f6281APcacInfoBoardMacInfo,
+ RD_88F6281A_PCAC_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */
+ 0,
+ RD_88F6281A_PCAC_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */
+ NULL,
+ 0, /* ledsPolarity */
+ RD_88F6281A_PCAC_OE_LOW, /* gppOutEnLow */
+ RD_88F6281A_PCAC_OE_HIGH, /* gppOutEnHigh */
+ RD_88F6281A_PCAC_OE_VAL_LOW, /* gppOutValLow */
+ RD_88F6281A_PCAC_OE_VAL_HIGH, /* gppOutValHigh */
+ 0, /* gppPolarityValLow */
+ 0, /* gppPolarityValHigh */
+ NULL /* pSwitchInfo */
+};
+
+
+/* 6281 Sheeva Plug*/
+
+#define SHEEVA_PLUG_BOARD_PCI_IF_NUM 0x0
+#define SHEEVA_PLUG_BOARD_TWSI_DEF_NUM 0x0
+#define SHEEVA_PLUG_BOARD_MAC_INFO_NUM 0x1
+#define SHEEVA_PLUG_BOARD_GPP_INFO_NUM 0x0
+#define SHEEVA_PLUG_BOARD_MPP_GROUP_TYPE_NUN 0x1
+#define SHEEVA_PLUG_BOARD_MPP_CONFIG_NUM 0x1
+#define SHEEVA_PLUG_BOARD_DEVICE_CONFIG_NUM 0x1
+#define SHEEVA_PLUG_BOARD_DEBUG_LED_NUM 0x1
+
+MV_U8 sheevaPlugInfoBoardDebugLedIf[] =
+ {49};
+
+MV_BOARD_MAC_INFO sheevaPlugInfoBoardMacInfo[] =
+ /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+ {{BOARD_MAC_SPEED_AUTO, 0x0}};
+
+MV_BOARD_TWSI_INFO sheevaPlugInfoBoardTwsiDev[] =
+ /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */
+ {{BOARD_TWSI_OTHER, 0x0, ADDR7_BIT}};
+
+MV_BOARD_MPP_TYPE_INFO sheevaPlugInfoBoardMppTypeInfo[] =
+ {{MV_BOARD_OTHER, MV_BOARD_OTHER}
+ };
+
+MV_DEV_CS_INFO sheevaPlugInfoBoardDeCsInfo[] =
+ /*{deviceCS, params, devType, devWidth}*/
+ {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */
+
+MV_BOARD_MPP_INFO sheevaPlugInfoBoardMppConfigValue[] =
+ {{{
+ RD_SHEEVA_PLUG_MPP0_7,
+ RD_SHEEVA_PLUG_MPP8_15,
+ RD_SHEEVA_PLUG_MPP16_23,
+ RD_SHEEVA_PLUG_MPP24_31,
+ RD_SHEEVA_PLUG_MPP32_39,
+ RD_SHEEVA_PLUG_MPP40_47,
+ RD_SHEEVA_PLUG_MPP48_55
+ }}};
+
+MV_BOARD_INFO sheevaPlugInfo = {
+ "SHEEVA PLUG", /* boardName[MAX_BOARD_NAME_LEN] */
+ SHEEVA_PLUG_BOARD_MPP_GROUP_TYPE_NUN, /* numBoardMppGroupType */
+ sheevaPlugInfoBoardMppTypeInfo,
+ SHEEVA_PLUG_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */
+ sheevaPlugInfoBoardMppConfigValue,
+ 0, /* intsGppMaskLow */
+ 0, /* intsGppMaskHigh */
+ SHEEVA_PLUG_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */
+ sheevaPlugInfoBoardDeCsInfo,
+ SHEEVA_PLUG_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */
+ sheevaPlugInfoBoardTwsiDev,
+ SHEEVA_PLUG_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */
+ sheevaPlugInfoBoardMacInfo,
+ SHEEVA_PLUG_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */
+ 0,
+ SHEEVA_PLUG_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */
+ sheevaPlugInfoBoardDebugLedIf,
+ 0, /* ledsPolarity */
+ RD_SHEEVA_PLUG_OE_LOW, /* gppOutEnLow */
+ RD_SHEEVA_PLUG_OE_HIGH, /* gppOutEnHigh */
+ RD_SHEEVA_PLUG_OE_VAL_LOW, /* gppOutValLow */
+ RD_SHEEVA_PLUG_OE_VAL_HIGH, /* gppOutValHigh */
+ 0, /* gppPolarityValLow */
+ 0, /* gppPolarityValHigh */
+ NULL /* pSwitchInfo */
+};
+
+/* Customer specific board place holder*/
+
+#define DB_CUSTOMER_BOARD_PCI_IF_NUM 0x0
+#define DB_CUSTOMER_BOARD_TWSI_DEF_NUM 0x0
+#define DB_CUSTOMER_BOARD_MAC_INFO_NUM 0x0
+#define DB_CUSTOMER_BOARD_GPP_INFO_NUM 0x0
+#define DB_CUSTOMER_BOARD_MPP_GROUP_TYPE_NUN 0x0
+#define DB_CUSTOMER_BOARD_MPP_CONFIG_NUM 0x0
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+ #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM 0x0
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+ #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM 0x0
+#else
+ #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM 0x0
+#endif
+#define DB_CUSTOMER_BOARD_DEBUG_LED_NUM 0x0
+
+MV_U8 dbCustomerInfoBoardDebugLedIf[] =
+ {0};
+
+MV_BOARD_MAC_INFO dbCustomerInfoBoardMacInfo[] =
+ /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+ {{BOARD_MAC_SPEED_AUTO, 0x0}};
+
+MV_BOARD_TWSI_INFO dbCustomerInfoBoardTwsiDev[] =
+ /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */
+ {{BOARD_TWSI_OTHER, 0x0, ADDR7_BIT}};
+
+MV_BOARD_MPP_TYPE_INFO dbCustomerInfoBoardMppTypeInfo[] =
+ {{MV_BOARD_OTHER, MV_BOARD_OTHER}
+ };
+
+MV_DEV_CS_INFO dbCustomerInfoBoardDeCsInfo[] =
+ /*{deviceCS, params, devType, devWidth}*/
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+ {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+ {
+ {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */
+ {2, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */
+ };
+#else
+ {{2, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */
+#endif
+
+MV_BOARD_MPP_INFO dbCustomerInfoBoardMppConfigValue[] =
+ {{{
+ DB_CUSTOMER_MPP0_7,
+ DB_CUSTOMER_MPP8_15,
+ DB_CUSTOMER_MPP16_23,
+ DB_CUSTOMER_MPP24_31,
+ DB_CUSTOMER_MPP32_39,
+ DB_CUSTOMER_MPP40_47,
+ DB_CUSTOMER_MPP48_55
+ }}};
+
+MV_BOARD_INFO dbCustomerInfo = {
+ "DB-CUSTOMER", /* boardName[MAX_BOARD_NAME_LEN] */
+ DB_CUSTOMER_BOARD_MPP_GROUP_TYPE_NUN, /* numBoardMppGroupType */
+ dbCustomerInfoBoardMppTypeInfo,
+ DB_CUSTOMER_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */
+ dbCustomerInfoBoardMppConfigValue,
+ 0, /* intsGppMaskLow */
+ 0, /* intsGppMaskHigh */
+ DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */
+ dbCustomerInfoBoardDeCsInfo,
+ DB_CUSTOMER_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */
+ dbCustomerInfoBoardTwsiDev,
+ DB_CUSTOMER_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */
+ dbCustomerInfoBoardMacInfo,
+ DB_CUSTOMER_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */
+ 0,
+ DB_CUSTOMER_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */
+ NULL,
+ 0, /* ledsPolarity */
+ DB_CUSTOMER_OE_LOW, /* gppOutEnLow */
+ DB_CUSTOMER_OE_HIGH, /* gppOutEnHigh */
+ DB_CUSTOMER_OE_VAL_LOW, /* gppOutValLow */
+ DB_CUSTOMER_OE_VAL_HIGH, /* gppOutValHigh */
+ 0, /* gppPolarityValLow */
+ 0, /* gppPolarityValHigh */
+ NULL /* pSwitchInfo */
+};
+
+MV_BOARD_INFO* boardInfoTbl[] = {
+ &db88f6281AInfo,
+ &rd88f6281AInfo,
+ &db88f6192AInfo,
+ &rd88f6192AInfo,
+ &db88f6180AInfo,
+ &db88f6190AInfo,
+ &rd88f6190AInfo,
+ &rd88f6281APcacInfo,
+ &dbCustomerInfo,
+ &sheevaPlugInfo
+ };
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvBoardEnvSpech
+#define __INCmvBoardEnvSpech
+
+#include "mvSysHwConfig.h"
+
+
+/* For future use */
+#define BD_ID_DATA_START_OFFS 0x0
+#define BD_DETECT_SEQ_OFFS 0x0
+#define BD_SYS_NUM_OFFS 0x4
+#define BD_NAME_OFFS 0x8
+
+/* I2C bus addresses */
+#define MV_BOARD_CTRL_I2C_ADDR 0x0 /* Controller slave addr */
+#define MV_BOARD_CTRL_I2C_ADDR_TYPE ADDR7_BIT
+#define MV_BOARD_DIMM0_I2C_ADDR 0x56
+#define MV_BOARD_DIMM0_I2C_ADDR_TYPE ADDR7_BIT
+#define MV_BOARD_DIMM1_I2C_ADDR 0x54
+#define MV_BOARD_DIMM1_I2C_ADDR_TYPE ADDR7_BIT
+#define MV_BOARD_EEPROM_I2C_ADDR 0x51
+#define MV_BOARD_EEPROM_I2C_ADDR_TYPE ADDR7_BIT
+#define MV_BOARD_MAIN_EEPROM_I2C_ADDR 0x50
+#define MV_BOARD_MAIN_EEPROM_I2C_ADDR_TYPE ADDR7_BIT
+#define MV_BOARD_MUX_I2C_ADDR_ENTRY 0x2
+#define MV_BOARD_DIMM_I2C_CHANNEL 0x0
+
+#define BOOT_FLASH_INDEX 0
+#define MAIN_FLASH_INDEX 1
+
+#define BOARD_ETH_START_PORT_NUM 0
+
+/* Supported clocks */
+#define MV_BOARD_TCLK_100MHZ 100000000
+#define MV_BOARD_TCLK_125MHZ 125000000
+#define MV_BOARD_TCLK_133MHZ 133333333
+#define MV_BOARD_TCLK_150MHZ 150000000
+#define MV_BOARD_TCLK_166MHZ 166666667
+#define MV_BOARD_TCLK_200MHZ 200000000
+
+#define MV_BOARD_SYSCLK_100MHZ 100000000
+#define MV_BOARD_SYSCLK_125MHZ 125000000
+#define MV_BOARD_SYSCLK_133MHZ 133333333
+#define MV_BOARD_SYSCLK_150MHZ 150000000
+#define MV_BOARD_SYSCLK_166MHZ 166666667
+#define MV_BOARD_SYSCLK_200MHZ 200000000
+#define MV_BOARD_SYSCLK_233MHZ 233333333
+#define MV_BOARD_SYSCLK_250MHZ 250000000
+#define MV_BOARD_SYSCLK_267MHZ 266666667
+#define MV_BOARD_SYSCLK_300MHZ 300000000
+#define MV_BOARD_SYSCLK_333MHZ 333333334
+#define MV_BOARD_SYSCLK_400MHZ 400000000
+
+#define MV_BOARD_REFCLK_25MHZ 25000000
+
+/* Board specific */
+/* =============================== */
+
+/* boards ID numbers */
+
+#define BOARD_ID_BASE 0x0
+
+/* New board ID numbers */
+#define DB_88F6281A_BP_ID (BOARD_ID_BASE)
+#define DB_88F6281_BP_MLL_ID 1680
+#define RD_88F6281A_ID (BOARD_ID_BASE+0x1)
+#define RD_88F6281_MLL_ID 1682
+#define DB_88F6192A_BP_ID (BOARD_ID_BASE+0x2)
+#define RD_88F6192A_ID (BOARD_ID_BASE+0x3)
+#define RD_88F6192_MLL_ID 1681
+#define DB_88F6180A_BP_ID (BOARD_ID_BASE+0x4)
+#define DB_88F6190A_BP_ID (BOARD_ID_BASE+0x5)
+#define RD_88F6190A_ID (BOARD_ID_BASE+0x6)
+#define RD_88F6281A_PCAC_ID (BOARD_ID_BASE+0x7)
+#define DB_CUSTOMER_ID (BOARD_ID_BASE+0x8)
+#define SHEEVA_PLUG_ID (BOARD_ID_BASE+0x9)
+#define MV_MAX_BOARD_ID (SHEEVA_PLUG_ID + 1)
+
+/* DB-88F6281A-BP */
+#if defined(MV_NAND)
+ #define DB_88F6281A_MPP0_7 0x21111111
+#else
+ #define DB_88F6281A_MPP0_7 0x21112220
+#endif
+#define DB_88F6281A_MPP8_15 0x11113311
+#define DB_88F6281A_MPP16_23 0x00551111
+#define DB_88F6281A_MPP24_31 0x00000000
+#define DB_88F6281A_MPP32_39 0x00000000
+#define DB_88F6281A_MPP40_47 0x00000000
+#define DB_88F6281A_MPP48_55 0x00000000
+#define DB_88F6281A_OE_LOW 0x0
+#if defined(MV_TDM_5CHANNELS)
+ #define DB_88F6281A_OE_HIGH (BIT6)
+#else
+#define DB_88F6281A_OE_HIGH 0x0
+#endif
+#define DB_88F6281A_OE_VAL_LOW 0x0
+#define DB_88F6281A_OE_VAL_HIGH 0x0
+
+/* RD-88F6281A */
+#if defined(MV_NAND)
+ #define RD_88F6281A_MPP0_7 0x21111111
+#else
+ #define RD_88F6281A_MPP0_7 0x21112220
+#endif
+#define RD_88F6281A_MPP8_15 0x11113311
+#define RD_88F6281A_MPP16_23 0x33331111
+#define RD_88F6281A_MPP24_31 0x33003333
+#define RD_88F6281A_MPP32_39 0x20440533
+#define RD_88F6281A_MPP40_47 0x22202222
+#define RD_88F6281A_MPP48_55 0x00000002
+#define RD_88F6281A_OE_LOW (BIT28 | BIT29)
+#define RD_88F6281A_OE_HIGH (BIT3 | BIT6 | BIT17)
+#define RD_88F6281A_OE_VAL_LOW 0x0
+#define RD_88F6281A_OE_VAL_HIGH 0x0
+
+/* DB-88F6192A-BP */
+#if defined(MV_NAND)
+ #define DB_88F6192A_MPP0_7 0x21111111
+#else
+ #define DB_88F6192A_MPP0_7 0x21112220
+#endif
+#define DB_88F6192A_MPP8_15 0x11113311
+#define DB_88F6192A_MPP16_23 0x00501111
+#define DB_88F6192A_MPP24_31 0x00000000
+#define DB_88F6192A_MPP32_35 0x00000000
+#define DB_88F6192A_OE_LOW (BIT22 | BIT23)
+#define DB_88F6192A_OE_HIGH 0x0
+#define DB_88F6192A_OE_VAL_LOW 0x0
+#define DB_88F6192A_OE_VAL_HIGH 0x0
+
+/* RD-88F6192A */
+#define RD_88F6192A_MPP0_7 0x01222222
+#define RD_88F6192A_MPP8_15 0x00000011
+#define RD_88F6192A_MPP16_23 0x05550000
+#define RD_88F6192A_MPP24_31 0x0
+#define RD_88F6192A_MPP32_35 0x0
+#define RD_88F6192A_OE_LOW (BIT11 | BIT14 | BIT24 | BIT25 | BIT26 | BIT27 | BIT30 | BIT31)
+#define RD_88F6192A_OE_HIGH (BIT0 | BIT2)
+#define RD_88F6192A_OE_VAL_LOW 0x18400
+#define RD_88F6192A_OE_VAL_HIGH 0x8
+
+/* DB-88F6180A-BP */
+#if defined(MV_NAND)
+ #define DB_88F6180A_MPP0_7 0x21111111
+#else
+ #define DB_88F6180A_MPP0_7 0x01112222
+#endif
+#define DB_88F6180A_MPP8_15 0x11113311
+#define DB_88F6180A_MPP16_23 0x00001111
+#define DB_88F6180A_MPP24_31 0x0
+#define DB_88F6180A_MPP32_39 0x4444c000
+#define DB_88F6180A_MPP40_44 0x00044444
+#define DB_88F6180A_OE_LOW 0x0
+#define DB_88F6180A_OE_HIGH 0x0
+#define DB_88F6180A_OE_VAL_LOW 0x0
+#define DB_88F6180A_OE_VAL_HIGH 0x0
+
+/* RD-88F6281A_PCAC */
+#define RD_88F6281A_PCAC_MPP0_7 0x21111111
+#define RD_88F6281A_PCAC_MPP8_15 0x00003311
+#define RD_88F6281A_PCAC_MPP16_23 0x00001100
+#define RD_88F6281A_PCAC_MPP24_31 0x00000000
+#define RD_88F6281A_PCAC_MPP32_39 0x00000000
+#define RD_88F6281A_PCAC_MPP40_47 0x00000000
+#define RD_88F6281A_PCAC_MPP48_55 0x00000000
+#define RD_88F6281A_PCAC_OE_LOW 0x0
+#define RD_88F6281A_PCAC_OE_HIGH 0x0
+#define RD_88F6281A_PCAC_OE_VAL_LOW 0x0
+#define RD_88F6281A_PCAC_OE_VAL_HIGH 0x0
+
+/* SHEEVA PLUG */
+#define RD_SHEEVA_PLUG_MPP0_7 0x01111111
+#define RD_SHEEVA_PLUG_MPP8_15 0x11113322
+#define RD_SHEEVA_PLUG_MPP16_23 0x00001111
+#define RD_SHEEVA_PLUG_MPP24_31 0x00100000
+#define RD_SHEEVA_PLUG_MPP32_39 0x00000000
+#define RD_SHEEVA_PLUG_MPP40_47 0x00000000
+#define RD_SHEEVA_PLUG_MPP48_55 0x00000000
+#define RD_SHEEVA_PLUG_OE_LOW 0x0
+#define RD_SHEEVA_PLUG_OE_HIGH 0x0
+#define RD_SHEEVA_PLUG_OE_VAL_LOW (BIT29)
+#define RD_SHEEVA_PLUG_OE_VAL_HIGH ((~(BIT17 | BIT16 | BIT15)) | BIT14)
+
+/* DB-CUSTOMER */
+#define DB_CUSTOMER_MPP0_7 0x21111111
+#define DB_CUSTOMER_MPP8_15 0x00003311
+#define DB_CUSTOMER_MPP16_23 0x00001100
+#define DB_CUSTOMER_MPP24_31 0x00000000
+#define DB_CUSTOMER_MPP32_39 0x00000000
+#define DB_CUSTOMER_MPP40_47 0x00000000
+#define DB_CUSTOMER_MPP48_55 0x00000000
+#define DB_CUSTOMER_OE_LOW 0x0
+#define DB_CUSTOMER_OE_HIGH (~((BIT6) | (BIT7) | (BIT8) | (BIT9)))
+#define DB_CUSTOMER_OE_VAL_LOW 0x0
+#define DB_CUSTOMER_OE_VAL_HIGH 0x0
+
+#endif /* __INCmvBoardEnvSpech */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "cpu/mvCpu.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvRegs.h"
+#include "ctrlEnv/sys/mvCpuIfRegs.h"
+
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+/* locals */
+
+/*******************************************************************************
+* mvCpuPclkGet - Get the CPU pClk (pipe clock)
+*
+* DESCRIPTION:
+* This routine extract the CPU core clock.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit clock cycles in MHertz.
+*
+*******************************************************************************/
+/* 6180 have different clk reset sampling */
+
+static MV_U32 mvCpu6180PclkGet(MV_VOID)
+{
+ MV_U32 tmpPClkRate=0;
+ MV_CPU_ARM_CLK cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL;
+
+ tmpPClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+ tmpPClkRate = tmpPClkRate & MSAR_CPUCLCK_MASK_6180;
+ tmpPClkRate = tmpPClkRate >> MSAR_CPUCLCK_OFFS_6180;
+
+ tmpPClkRate = cpu6180_ddr_l2_CLK[tmpPClkRate].cpuClk;
+
+ return tmpPClkRate;
+}
+
+
+MV_U32 mvCpuPclkGet(MV_VOID)
+{
+#if defined(PCLCK_AUTO_DETECT)
+ MV_U32 tmpPClkRate=0;
+ MV_U32 cpuCLK[] = MV_CPU_CLCK_TBL;
+
+ if(mvCtrlModelGet() == MV_6180_DEV_ID)
+ return mvCpu6180PclkGet();
+
+ tmpPClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+ tmpPClkRate = MSAR_CPUCLCK_EXTRACT(tmpPClkRate);
+ tmpPClkRate = cpuCLK[tmpPClkRate];
+
+ return tmpPClkRate;
+#else
+ return MV_DEFAULT_PCLK
+#endif
+}
+
+/*******************************************************************************
+* mvCpuL2ClkGet - Get the CPU L2 (CPU bus clock)
+*
+* DESCRIPTION:
+* This routine extract the CPU L2 clock.
+*
+* RETURN:
+* 32bit clock cycles in Hertz.
+*
+*******************************************************************************/
+static MV_U32 mvCpu6180L2ClkGet(MV_VOID)
+{
+ MV_U32 L2ClkRate=0;
+ MV_CPU_ARM_CLK _cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL;
+
+ L2ClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+ L2ClkRate = L2ClkRate & MSAR_CPUCLCK_MASK_6180;
+ L2ClkRate = L2ClkRate >> MSAR_CPUCLCK_OFFS_6180;
+
+ L2ClkRate = _cpu6180_ddr_l2_CLK[L2ClkRate].l2Clk;
+
+ return L2ClkRate;
+
+}
+
+MV_U32 mvCpuL2ClkGet(MV_VOID)
+{
+#ifdef L2CLK_AUTO_DETECT
+ MV_U32 L2ClkRate, tmp, pClkRate, indexL2Rtio;
+ MV_U32 L2Rtio[][2] = MV_L2_CLCK_RTIO_TBL;
+
+ if(mvCtrlModelGet() == MV_6180_DEV_ID)
+ return mvCpu6180L2ClkGet();
+
+ pClkRate = mvCpuPclkGet();
+
+ tmp = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+ indexL2Rtio = MSAR_L2CLCK_EXTRACT(tmp);
+
+ L2ClkRate = ((pClkRate * L2Rtio[indexL2Rtio][1]) / L2Rtio[indexL2Rtio][0]);
+
+ return L2ClkRate;
+#else
+ return MV_BOARD_DEFAULT_L2CLK;
+#endif
+}
+
+
+/*******************************************************************************
+* mvCpuNameGet - Get CPU name
+*
+* DESCRIPTION:
+* This function returns a string describing the CPU model and revision.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* pNameBuff - Buffer to contain board name string. Minimum size 32 chars.
+*
+* RETURN:
+* None.
+*******************************************************************************/
+MV_VOID mvCpuNameGet(char *pNameBuff)
+{
+ MV_U32 cpuModel;
+
+ cpuModel = mvOsCpuPartGet();
+
+ /* The CPU module is indicated in the Processor Version Register (PVR) */
+ switch(cpuModel)
+ {
+ case CPU_PART_MRVL131:
+ mvOsSPrintf(pNameBuff, "%s (Rev %d)", "Marvell Feroceon",mvOsCpuRevGet());
+ break;
+ case CPU_PART_ARM926:
+ mvOsSPrintf(pNameBuff, "%s (Rev %d)", "ARM926",mvOsCpuRevGet());
+ break;
+ case CPU_PART_ARM946:
+ mvOsSPrintf(pNameBuff, "%s (Rev %d)", "ARM946",mvOsCpuRevGet());
+ break;
+ default:
+ mvOsSPrintf(pNameBuff,"??? (0x%04x) (Rev %d)",cpuModel,mvOsCpuRevGet());
+ break;
+ } /* switch */
+
+ return;
+}
+
+
+#define MV_PROC_STR_SIZE 50
+
+static void mvCpuIfGetL2EccMode(MV_8 *buf)
+{
+ MV_U32 regVal = MV_REG_READ(CPU_L2_CONFIG_REG);
+ if (regVal & BIT2)
+ mvOsSPrintf(buf, "L2 ECC Enabled");
+ else
+ mvOsSPrintf(buf, "L2 ECC Disabled");
+}
+
+static void mvCpuIfGetL2Mode(MV_8 *buf)
+{
+ MV_U32 regVal = 0;
+ __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */
+ if (regVal & BIT22)
+ mvOsSPrintf(buf, "L2 Enabled");
+ else
+ mvOsSPrintf(buf, "L2 Disabled");
+}
+
+static void mvCpuIfGetL2PrefetchMode(MV_8 *buf)
+{
+ MV_U32 regVal = 0;
+ __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */
+ if (regVal & BIT24)
+ mvOsSPrintf(buf, "L2 Prefetch Disabled");
+ else
+ mvOsSPrintf(buf, "L2 Prefetch Enabled");
+}
+
+static void mvCpuIfGetWriteAllocMode(MV_8 *buf)
+{
+ MV_U32 regVal = 0;
+ __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */
+ if (regVal & BIT28)
+ mvOsSPrintf(buf, "Write Allocate Enabled");
+ else
+ mvOsSPrintf(buf, "Write Allocate Disabled");
+}
+
+static void mvCpuIfGetCpuStreamMode(MV_8 *buf)
+{
+ MV_U32 regVal = 0;
+ __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */
+ if (regVal & BIT29)
+ mvOsSPrintf(buf, "CPU Streaming Enabled");
+ else
+ mvOsSPrintf(buf, "CPU Streaming Disabled");
+}
+
+static void mvCpuIfPrintCpuRegs(void)
+{
+ MV_U32 regVal = 0;
+
+ __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */
+ mvOsPrintf("Extra Feature Reg = 0x%x\n",regVal);
+
+ __asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (regVal)); /* Read Control register */
+ mvOsPrintf("Control Reg = 0x%x\n",regVal);
+
+ __asm volatile ("mrc p15, 0, %0, c0, c0, 0" : "=r" (regVal)); /* Read ID Code register */
+ mvOsPrintf("ID Code Reg = 0x%x\n",regVal);
+
+ __asm volatile ("mrc p15, 0, %0, c0, c0, 1" : "=r" (regVal)); /* Read Cache Type register */
+ mvOsPrintf("Cache Type Reg = 0x%x\n",regVal);
+
+}
+
+MV_U32 mvCpuIfPrintSystemConfig(MV_8 *buffer, MV_U32 index)
+{
+ MV_U32 count = 0;
+
+ MV_8 L2_ECC_str[MV_PROC_STR_SIZE];
+ MV_8 L2_En_str[MV_PROC_STR_SIZE];
+ MV_8 L2_Prefetch_str[MV_PROC_STR_SIZE];
+ MV_8 Write_Alloc_str[MV_PROC_STR_SIZE];
+ MV_8 Cpu_Stream_str[MV_PROC_STR_SIZE];
+
+ mvCpuIfGetL2Mode(L2_En_str);
+ mvCpuIfGetL2EccMode(L2_ECC_str);
+ mvCpuIfGetL2PrefetchMode(L2_Prefetch_str);
+ mvCpuIfGetWriteAllocMode(Write_Alloc_str);
+ mvCpuIfGetCpuStreamMode(Cpu_Stream_str);
+ mvCpuIfPrintCpuRegs();
+
+ count += mvOsSPrintf(buffer + count + index, "%s\n", L2_En_str);
+ count += mvOsSPrintf(buffer + count + index, "%s\n", L2_ECC_str);
+ count += mvOsSPrintf(buffer + count + index, "%s\n", L2_Prefetch_str);
+ count += mvOsSPrintf(buffer + count + index, "%s\n", Write_Alloc_str);
+ count += mvOsSPrintf(buffer + count + index, "%s\n", Cpu_Stream_str);
+ return count;
+}
+
+MV_U32 whoAmI(MV_VOID)
+{
+ return 0;
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCpuh
+#define __INCmvCpuh
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+/* defines */
+#define CPU_PART_MRVL131 0x131
+#define CPU_PART_ARM926 0x926
+#define CPU_PART_ARM946 0x946
+#define MV_CPU_ARM_CLK_ELM_SIZE 12
+#define MV_CPU_ARM_CLK_RATIO_OFF 8
+#define MV_CPU_ARM_CLK_DDR_OFF 4
+
+#ifndef MV_ASMLANGUAGE
+typedef struct _mvCpuArmClk
+{
+ MV_U32 cpuClk; /* CPU clock in MHz */
+ MV_U32 ddrClk; /* DDR clock in MHz */
+ MV_U32 l2Clk; /* CPU DDR clock ratio */
+
+}MV_CPU_ARM_CLK;
+
+MV_U32 mvCpuPclkGet(MV_VOID);
+MV_VOID mvCpuNameGet(char *pNameBuff);
+MV_U32 mvCpuL2ClkGet(MV_VOID);
+MV_U32 mvCpuIfPrintSystemConfig(MV_8 *buffer, MV_U32 index);
+MV_U32 whoAmI(MV_VOID);
+
+#endif /* MV_ASMLANGUAGE */
+
+
+#endif /* __INCmvCpuh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvCtrlEnvAddrDec.h - Marvell controller address decode library
+*
+* DESCRIPTION:
+*
+* DEPENDENCIES:
+* None.
+*
+*******************************************************************************/
+
+/* includes */
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+#include "ctrlEnv/sys/mvAhbToMbusRegs.h"
+#include "ddr2/mvDramIfRegs.h"
+#include "pex/mvPexRegs.h"
+
+#define MV_DEBUG
+
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+/* Default Attributes array */
+MV_TARGET_ATTRIB mvTargetDefaultsArray[] = TARGETS_DEF_ARRAY;
+extern MV_TARGET *sampleAtResetTargetArray;
+/* Dram\AHBToMbus\PEX share regsiter */
+
+#define CTRL_DEC_BASE_OFFS 16
+#define CTRL_DEC_BASE_MASK (0xffff << CTRL_DEC_BASE_OFFS)
+#define CTRL_DEC_BASE_ALIGNMENT 0x10000
+
+#define CTRL_DEC_SIZE_OFFS 16
+#define CTRL_DEC_SIZE_MASK (0xffff << CTRL_DEC_SIZE_OFFS)
+#define CTRL_DEC_SIZE_ALIGNMENT 0x10000
+
+#define CTRL_DEC_WIN_EN BIT0
+
+
+
+/*******************************************************************************
+* mvCtrlAddrDecToReg - Get address decode register format values
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_STATUS mvCtrlAddrDecToReg(MV_ADDR_WIN *pAddrDecWin, MV_DEC_REGS *pAddrDecRegs)
+{
+
+ MV_U32 baseToReg=0 , sizeToReg=0;
+
+ /* BaseLow[31:16] => base register [31:16] */
+ baseToReg = pAddrDecWin->baseLow & CTRL_DEC_BASE_MASK;
+
+ /* Write to address decode Base Address Register */
+ pAddrDecRegs->baseReg &= ~CTRL_DEC_BASE_MASK;
+ pAddrDecRegs->baseReg |= baseToReg;
+
+ /* Get size register value according to window size */
+ sizeToReg = ctrlSizeToReg(pAddrDecWin->size, CTRL_DEC_SIZE_ALIGNMENT);
+
+ /* Size parameter validity check. */
+ if (-1 == sizeToReg)
+ {
+ return MV_BAD_PARAM;
+ }
+
+ /* set size */
+ pAddrDecRegs->sizeReg &= ~CTRL_DEC_SIZE_MASK;
+ pAddrDecRegs->sizeReg |= (sizeToReg << CTRL_DEC_SIZE_OFFS);
+
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvCtrlRegToAddrDec - Extract address decode struct from registers.
+*
+* DESCRIPTION:
+* This function extract address decode struct from address decode
+* registers given as parameters.
+*
+* INPUT:
+* pAddrDecRegs - Address decode register struct.
+*
+* OUTPUT:
+* pAddrDecWin - Target window data structure.
+*
+* RETURN:
+* MV_BAD_PARAM if address decode registers data is invalid.
+*
+*******************************************************************************/
+MV_STATUS mvCtrlRegToAddrDec(MV_DEC_REGS *pAddrDecRegs, MV_ADDR_WIN *pAddrDecWin)
+{
+ MV_U32 sizeRegVal;
+
+ sizeRegVal = (pAddrDecRegs->sizeReg & CTRL_DEC_SIZE_MASK) >>
+ CTRL_DEC_SIZE_OFFS;
+
+ pAddrDecWin->size = ctrlRegToSize(sizeRegVal, CTRL_DEC_SIZE_ALIGNMENT);
+
+
+ /* Extract base address */
+ /* Base register [31:16] ==> baseLow[31:16] */
+ pAddrDecWin->baseLow = pAddrDecRegs->baseReg & CTRL_DEC_BASE_MASK;
+
+ pAddrDecWin->baseHigh = 0;
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvCtrlAttribGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+
+MV_STATUS mvCtrlAttribGet(MV_TARGET target,
+ MV_TARGET_ATTRIB *targetAttrib)
+{
+
+ targetAttrib->attrib = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].attrib;
+ targetAttrib->targetId = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].targetId;
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvCtrlGetAttrib -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_TARGET mvCtrlTargetGet(MV_TARGET_ATTRIB *targetAttrib)
+{
+ MV_TARGET target;
+ MV_TARGET x;
+ for (target = SDRAM_CS0; target < MAX_TARGETS ; target ++)
+ {
+ x = MV_CHANGE_BOOT_CS(target);
+ if ((mvTargetDefaultsArray[x].attrib == targetAttrib->attrib) &&
+ (mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].targetId == targetAttrib->targetId))
+ {
+ /* found it */
+ break;
+ }
+ }
+
+ return target;
+}
+
+MV_STATUS mvCtrlAddrDecToParams(MV_DEC_WIN *pAddrDecWin,
+ MV_DEC_WIN_PARAMS *pWinParam)
+{
+ MV_U32 baseToReg=0, sizeToReg=0;
+
+ /* BaseLow[31:16] => base register [31:16] */
+ baseToReg = pAddrDecWin->addrWin.baseLow & CTRL_DEC_BASE_MASK;
+
+ /* Write to address decode Base Address Register */
+ pWinParam->baseAddr &= ~CTRL_DEC_BASE_MASK;
+ pWinParam->baseAddr |= baseToReg;
+
+ /* Get size register value according to window size */
+ sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, CTRL_DEC_SIZE_ALIGNMENT);
+
+ /* Size parameter validity check. */
+ if (-1 == sizeToReg)
+ {
+ mvOsPrintf("mvCtrlAddrDecToParams: ERR. ctrlSizeToReg failed.\n");
+ return MV_BAD_PARAM;
+ }
+ pWinParam->size = sizeToReg;
+
+ pWinParam->attrib = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(pAddrDecWin->target)].attrib;
+ pWinParam->targetId = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(pAddrDecWin->target)].targetId;
+
+ return MV_OK;
+}
+
+MV_STATUS mvCtrlParamsToAddrDec(MV_DEC_WIN_PARAMS *pWinParam,
+ MV_DEC_WIN *pAddrDecWin)
+{
+ MV_TARGET_ATTRIB targetAttrib;
+
+ pAddrDecWin->addrWin.baseLow = pWinParam->baseAddr;
+
+ /* Upper 32bit address base is supported under PCI High Address remap */
+ pAddrDecWin->addrWin.baseHigh = 0;
+
+ /* Prepare sizeReg to ctrlRegToSize function */
+ pAddrDecWin->addrWin.size = ctrlRegToSize(pWinParam->size, CTRL_DEC_SIZE_ALIGNMENT);
+
+ if (-1 == pAddrDecWin->addrWin.size)
+ {
+ DB(mvOsPrintf("mvCtrlParamsToAddrDec: ERR. ctrlRegToSize failed.\n"));
+ return MV_BAD_PARAM;
+ }
+ targetAttrib.targetId = pWinParam->targetId;
+ targetAttrib.attrib = pWinParam->attrib;
+
+ pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+ return MV_OK;
+}
+
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCtrlEnvAddrDech
+#define __INCmvCtrlEnvAddrDech
+
+/* includes */
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvRegs.h"
+
+
+/* defines */
+/* DUnit attributes */
+#define ATMWCR_WIN_DUNIT_CS0_OFFS 0
+#define ATMWCR_WIN_DUNIT_CS0_MASK BIT0
+#define ATMWCR_WIN_DUNIT_CS0_REQ (0 << ATMWCR_WIN_DUNIT_CS0_OFFS)
+
+#define ATMWCR_WIN_DUNIT_CS1_OFFS 1
+#define ATMWCR_WIN_DUNIT_CS1_MASK BIT1
+#define ATMWCR_WIN_DUNIT_CS1_REQ (0 << ATMWCR_WIN_DUNIT_CS1_OFFS)
+
+#define ATMWCR_WIN_DUNIT_CS2_OFFS 2
+#define ATMWCR_WIN_DUNIT_CS2_MASK BIT2
+#define ATMWCR_WIN_DUNIT_CS2_REQ (0 << ATMWCR_WIN_DUNIT_CS2_OFFS)
+
+#define ATMWCR_WIN_DUNIT_CS3_OFFS 3
+#define ATMWCR_WIN_DUNIT_CS3_MASK BIT3
+#define ATMWCR_WIN_DUNIT_CS3_REQ (0 << ATMWCR_WIN_DUNIT_CS3_OFFS)
+
+/* RUnit (Device) attributes */
+#define ATMWCR_WIN_RUNIT_DEVCS0_OFFS 0
+#define ATMWCR_WIN_RUNIT_DEVCS0_MASK BIT0
+#define ATMWCR_WIN_RUNIT_DEVCS0_REQ (0 << ATMWCR_WIN_RUNIT_DEVCS0_OFFS)
+
+#define ATMWCR_WIN_RUNIT_DEVCS1_OFFS 1
+#define ATMWCR_WIN_RUNIT_DEVCS1_MASK BIT1
+#define ATMWCR_WIN_RUNIT_DEVCS1_REQ (0 << ATMWCR_WIN_RUNIT_DEVCS1_OFFS)
+
+#define ATMWCR_WIN_RUNIT_DEVCS2_OFFS 2
+#define ATMWCR_WIN_RUNIT_DEVCS2_MASK BIT2
+#define ATMWCR_WIN_RUNIT_DEVCS2_REQ (0 << ATMWCR_WIN_RUNIT_DEVCS2_OFFS)
+
+#define ATMWCR_WIN_RUNIT_BOOTCS_OFFS 4
+#define ATMWCR_WIN_RUNIT_BOOTCS_MASK BIT4
+#define ATMWCR_WIN_RUNIT_BOOTCS_REQ (0 << ATMWCR_WIN_RUNIT_BOOTCS_OFFS)
+
+/* LMaster (PCI) attributes */
+#define ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS 0
+#define ATMWCR_WIN_LUNIT_BYTE_SWP_MASK BIT0
+#define ATMWCR_WIN_LUNIT_BYTE_SWP (0 << ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS)
+#define ATMWCR_WIN_LUNIT_BYTE_NO_SWP (1 << ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS)
+
+
+#define ATMWCR_WIN_LUNIT_WORD_SWP_OFFS 1
+#define ATMWCR_WIN_LUNIT_WORD_SWP_MASK BIT1
+#define ATMWCR_WIN_LUNIT_WORD_SWP (0 << ATMWCR_WIN_LUNIT_WORD_SWP_OFFS)
+#define ATMWCR_WIN_LUNIT_WORD_NO_SWP (1 << ATMWCR_WIN_LUNIT_WORD_SWP_OFFS)
+
+#define ATMWCR_WIN_LUNIT_NO_SNOOP BIT2
+
+#define ATMWCR_WIN_LUNIT_TYPE_OFFS 3
+#define ATMWCR_WIN_LUNIT_TYPE_MASK BIT3
+#define ATMWCR_WIN_LUNIT_TYPE_IO (0 << ATMWCR_WIN_LUNIT_TYPE_OFFS)
+#define ATMWCR_WIN_LUNIT_TYPE_MEM (1 << ATMWCR_WIN_LUNIT_TYPE_OFFS)
+
+#define ATMWCR_WIN_LUNIT_FORCE64_OFFS 4
+#define ATMWCR_WIN_LUNIT_FORCE64_MASK BIT4
+#define ATMWCR_WIN_LUNIT_FORCE64 (0 << ATMWCR_WIN_LUNIT_FORCE64_OFFS)
+
+#define ATMWCR_WIN_LUNIT_ORDERING_OFFS 6
+#define ATMWCR_WIN_LUNIT_ORDERING_MASK BIT6
+#define ATMWCR_WIN_LUNIT_ORDERING (1 << ATMWCR_WIN_LUNIT_FORCE64_OFFS)
+
+/* PEX Attributes */
+#define ATMWCR_WIN_PEX_TYPE_OFFS 3
+#define ATMWCR_WIN_PEX_TYPE_MASK BIT3
+#define ATMWCR_WIN_PEX_TYPE_IO (0 << ATMWCR_WIN_PEX_TYPE_OFFS)
+#define ATMWCR_WIN_PEX_TYPE_MEM (1 << ATMWCR_WIN_PEX_TYPE_OFFS)
+
+/* typedefs */
+
+/* Unsupported attributes for address decode: */
+/* 2) PCI0/1_REQ64n control */
+
+typedef struct _mvDecRegs
+{
+ MV_U32 baseReg;
+ MV_U32 baseRegHigh;
+ MV_U32 sizeReg;
+
+}MV_DEC_REGS;
+
+typedef struct _mvTargetAttrib
+{
+ MV_U8 attrib; /* chip select attributes */
+ MV_TARGET_ID targetId; /* Target Id of this MV_TARGET */
+
+}MV_TARGET_ATTRIB;
+
+
+/* This structure describes address decode window */
+typedef struct _mvDecWin
+{
+ MV_TARGET target; /* Target for addr decode window */
+ MV_ADDR_WIN addrWin; /* Address window of target */
+ MV_BOOL enable; /* Window enable/disable */
+}MV_DEC_WIN;
+
+typedef struct _mvDecWinParams
+{
+ MV_TARGET_ID targetId; /* Target ID field */
+ MV_U8 attrib; /* Attribute field */
+ MV_U32 baseAddr; /* Base address in register format */
+ MV_U32 size; /* Size in register format */
+}MV_DEC_WIN_PARAMS;
+
+
+/* mvCtrlEnvAddrDec API list */
+
+MV_STATUS mvCtrlAddrDecToReg(MV_ADDR_WIN *pAddrDecWin,
+ MV_DEC_REGS *pAddrDecRegs);
+
+MV_STATUS mvCtrlRegToAddrDec(MV_DEC_REGS *pAddrDecRegs,
+ MV_ADDR_WIN *pAddrDecWin);
+
+MV_STATUS mvCtrlAttribGet(MV_TARGET target,
+ MV_TARGET_ATTRIB *targetAttrib);
+
+MV_TARGET mvCtrlTargetGet(MV_TARGET_ATTRIB *targetAttrib);
+
+
+MV_STATUS mvCtrlAddrDecToParams(MV_DEC_WIN *pAddrDecWin,
+ MV_DEC_WIN_PARAMS *pWinParam);
+
+MV_STATUS mvCtrlParamsToAddrDec(MV_DEC_WIN_PARAMS *pWinParam,
+ MV_DEC_WIN *pAddrDecWin);
+
+
+
+
+#endif /* __INCmvCtrlEnvAddrDech */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCtrlEnvAsmh
+#define __INCmvCtrlEnvAsmh
+#include "pex/mvPexRegs.h"
+
+#define CHIP_BOND_REG 0x10034
+#define PCKG_OPT_MASK_AS #3
+#define PXCCARI_REVID_MASK_AS #PXCCARI_REVID_MASK
+
+/* Read device ID into toReg bits 15:0 from 0xd0000000 */
+/* defines */
+#define MV_DV_CTRL_MODEL_GET_ASM(toReg, tmpReg) \
+ MV_DV_REG_READ_ASM(toReg, tmpReg, CHIP_BOND_REG);\
+ and toReg, toReg, PCKG_OPT_MASK_AS /* Mask for package ID */
+
+/* Read device ID into toReg bits 15:0 from 0xf1000000*/
+#define MV_CTRL_MODEL_GET_ASM(toReg, tmpReg) \
+ MV_REG_READ_ASM(toReg, tmpReg, CHIP_BOND_REG);\
+ and toReg, toReg, PCKG_OPT_MASK_AS /* Mask for package ID */
+
+/* Read Revision into toReg bits 7:0 0xd0000000*/
+#define MV_DV_CTRL_REV_GET_ASM(toReg, tmpReg) \
+ /* Read device revision */ \
+ MV_DV_REG_READ_ASM(toReg, tmpReg, PEX_CFG_DIRECT_ACCESS(0,PEX_CLASS_CODE_AND_REVISION_ID));\
+ and toReg, toReg, PXCCARI_REVID_MASK_AS /* Mask for calss ID */
+
+/* Read Revision into toReg bits 7:0 0xf1000000*/
+#define MV_CTRL_REV_GET_ASM(toReg, tmpReg) \
+ /* Read device revision */ \
+ MV_REG_READ_ASM(toReg, tmpReg, PEX_CFG_DIRECT_ACCESS(0,PEX_CLASS_CODE_AND_REVISION_ID));\
+ and toReg, toReg, PXCCARI_REVID_MASK_AS /* Mask for calss ID */
+
+
+#endif /* __INCmvCtrlEnvAsmh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#include "mvCommon.h"
+#include "mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+#if defined(MV_INCLUDE_PEX)
+#include "pex/mvPex.h"
+#include "ctrlEnv/sys/mvSysPex.h"
+#endif
+
+#if defined(MV_INCLUDE_GIG_ETH)
+#include "ctrlEnv/sys/mvSysGbe.h"
+#endif
+
+#if defined(MV_INCLUDE_XOR)
+#include "ctrlEnv/sys/mvSysXor.h"
+#endif
+
+#if defined(MV_INCLUDE_SATA)
+#include "ctrlEnv/sys/mvSysSata.h"
+#endif
+
+#if defined(MV_INCLUDE_USB)
+#include "ctrlEnv/sys/mvSysUsb.h"
+#endif
+
+#if defined(MV_INCLUDE_AUDIO)
+#include "ctrlEnv/sys/mvSysAudio.h"
+#endif
+
+#if defined(MV_INCLUDE_CESA)
+#include "ctrlEnv/sys/mvSysCesa.h"
+#endif
+
+#if defined(MV_INCLUDE_TS)
+#include "ctrlEnv/sys/mvSysTs.h"
+#endif
+
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+/*******************************************************************************
+* mvCtrlEnvInit - Initialize Marvell controller environment.
+*
+* DESCRIPTION:
+* This function get environment information and initialize controller
+* internal/external environment. For example
+* 1) MPP settings according to board MPP macros.
+* NOTE: It is the user responsibility to shut down all DMA channels
+* in device and disable controller sub units interrupts during
+* boot process.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvCtrlEnvInit(MV_VOID)
+{
+ MV_U32 mppGroup;
+ MV_U32 devId;
+ MV_U32 boardId;
+ MV_U32 i;
+ MV_U32 maxMppGrp = 1;
+ MV_U32 mppVal = 0;
+ MV_U32 bootVal = 0;
+ MV_U32 mppGroupType = 0;
+ MV_U32 mppGroup1[][3] = MPP_GROUP_1_TYPE;
+ MV_U32 mppGroup2[][3] = MPP_GROUP_2_TYPE;
+
+ devId = mvCtrlModelGet();
+ boardId= mvBoardIdGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ maxMppGrp = MV_6281_MPP_MAX_GROUP;
+ break;
+ case MV_6192_DEV_ID:
+ maxMppGrp = MV_6192_MPP_MAX_GROUP;
+ break;
+ case MV_6190_DEV_ID:
+ maxMppGrp = MV_6190_MPP_MAX_GROUP;
+ break;
+ case MV_6180_DEV_ID:
+ maxMppGrp = MV_6180_MPP_MAX_GROUP;
+ break;
+ }
+
+ /* MPP Init */
+ /* We split mpp init to 3 phases:
+ * 1. We init mpp[19:0] from the board info. mpp[23:20] will be over write
+ * in phase 2.
+ * 2. We detect the mpp group type and according the mpp values [35:20].
+ * 3. We detect the mpp group type and according the mpp values [49:36].
+ */
+ /* Mpp phase 1 mpp[19:0] */
+ /* Read MPP group from board level and assign to MPP register */
+ for (mppGroup = 0; mppGroup < 3; mppGroup++)
+ {
+ mppVal = mvBoardMppGet(mppGroup);
+ if (mppGroup == 0)
+ {
+ bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup));
+ if (mvCtrlIsBootFromSPI())
+ {
+ mppVal &= ~0xffff;
+ bootVal &= 0xffff;
+ mppVal |= bootVal;
+ }
+ else if (mvCtrlIsBootFromSPIUseNAND())
+ {
+ mppVal &= ~0xf0000000;
+ bootVal &= 0xf0000000;
+ mppVal |= bootVal;
+ }
+ else if (mvCtrlIsBootFromNAND())
+ {
+ mppVal &= ~0xffffff;
+ bootVal &= 0xffffff;
+ mppVal |= bootVal;
+ }
+ }
+
+ if (mppGroup == 2)
+ {
+ bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup));
+ if (mvCtrlIsBootFromNAND())
+ {
+ mppVal &= ~0xff00;
+ bootVal &= 0xff00;
+ mppVal |= bootVal;
+ }
+ }
+
+ MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal);
+ }
+
+ /* Identify MPPs group */
+ mvBoardMppGroupIdUpdate();
+
+ /* Update MPPs mux relevent only on Marvell DB */
+ if ((boardId == DB_88F6281A_BP_ID) ||
+ (boardId == DB_88F6180A_BP_ID))
+ mvBoardMppMuxSet();
+
+ mppGroupType = mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_1);
+
+ /* Mpp phase 2 */
+ /* Read MPP group from board level and assign to MPP register */
+ if (devId != MV_6180_DEV_ID)
+ {
+ i = 0;
+ for (mppGroup = 2; mppGroup < 5; mppGroup++)
+ {
+ if ((mppGroupType == MV_BOARD_OTHER) ||
+ (boardId == RD_88F6281A_ID) ||
+ (boardId == RD_88F6192A_ID) ||
+ (boardId == RD_88F6190A_ID) ||
+ (boardId == RD_88F6281A_PCAC_ID) ||
+ (boardId == SHEEVA_PLUG_ID))
+ mppVal = mvBoardMppGet(mppGroup);
+ else
+ {
+ mppVal = mppGroup1[mppGroupType][i];
+ i++;
+ }
+
+ /* Group 2 is shared mpp[23:16] */
+ if (mppGroup == 2)
+ {
+ bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup));
+ mppVal &= ~0xffff;
+ bootVal &= 0xffff;
+ mppVal |= bootVal;
+ }
+
+ MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal);
+ }
+ }
+
+ if ((devId == MV_6192_DEV_ID) || (devId == MV_6190_DEV_ID))
+ return MV_OK;
+
+ /* Mpp phase 3 */
+ mppGroupType = mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_2);
+ /* Read MPP group from board level and assign to MPP register */
+ i = 0;
+ for (mppGroup = 4; mppGroup < 7; mppGroup++)
+ {
+ if ((mppGroupType == MV_BOARD_OTHER) ||
+ (boardId == RD_88F6281A_ID) ||
+ (boardId == RD_88F6281A_PCAC_ID) ||
+ (boardId == SHEEVA_PLUG_ID))
+ mppVal = mvBoardMppGet(mppGroup);
+ else
+ {
+ mppVal = mppGroup2[mppGroupType][i];
+ i++;
+ }
+
+ /* Group 4 is shared mpp[35:32] */
+ if (mppGroup == 4)
+ {
+ bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup));
+ mppVal &= ~0xffff;
+ bootVal &= 0xffff;
+ mppVal |= bootVal;
+ }
+
+ MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal);
+ }
+ /* Update SSCG configuration register*/
+ if(mvBoardIdGet() == DB_88F6281A_BP_ID || mvBoardIdGet() == DB_88F6192A_BP_ID ||
+ mvBoardIdGet() == DB_88F6190A_BP_ID || mvBoardIdGet() == DB_88F6180A_BP_ID)
+ MV_REG_WRITE(0x100d8, 0x53);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCtrlMppRegGet - return reg address of mpp group
+*
+* DESCRIPTION:
+*
+* INPUT:
+* mppGroup - MPP group.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_U32 - Register address.
+*
+*******************************************************************************/
+MV_U32 mvCtrlMppRegGet(MV_U32 mppGroup)
+{
+ MV_U32 ret;
+
+ switch(mppGroup){
+ case (0): ret = MPP_CONTROL_REG0;
+ break;
+ case (1): ret = MPP_CONTROL_REG1;
+ break;
+ case (2): ret = MPP_CONTROL_REG2;
+ break;
+ case (3): ret = MPP_CONTROL_REG3;
+ break;
+ case (4): ret = MPP_CONTROL_REG4;
+ break;
+ case (5): ret = MPP_CONTROL_REG5;
+ break;
+ case (6): ret = MPP_CONTROL_REG6;
+ break;
+ default: ret = MPP_CONTROL_REG0;
+ break;
+ }
+ return ret;
+}
+#if defined(MV_INCLUDE_PEX)
+/*******************************************************************************
+* mvCtrlPexMaxIfGet - Get Marvell controller number of PEX interfaces.
+*
+* DESCRIPTION:
+* This function returns Marvell controller number of PEX interfaces.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Marvell controller number of PEX interfaces. If controller
+* ID is undefined the function returns '0'.
+*
+*******************************************************************************/
+MV_U32 mvCtrlPexMaxIfGet(MV_VOID)
+{
+
+ return MV_PEX_MAX_IF;
+}
+#endif
+
+#if defined(MV_INCLUDE_GIG_ETH)
+/*******************************************************************************
+* mvCtrlEthMaxPortGet - Get Marvell controller number of etherent ports.
+*
+* DESCRIPTION:
+* This function returns Marvell controller number of etherent port.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Marvell controller number of etherent port.
+*
+*******************************************************************************/
+MV_U32 mvCtrlEthMaxPortGet(MV_VOID)
+{
+ MV_U32 devId;
+
+ devId = mvCtrlModelGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ return MV_6281_ETH_MAX_PORTS;
+ break;
+ case MV_6192_DEV_ID:
+ return MV_6192_ETH_MAX_PORTS;
+ break;
+ case MV_6190_DEV_ID:
+ return MV_6190_ETH_MAX_PORTS;
+ break;
+ case MV_6180_DEV_ID:
+ return MV_6180_ETH_MAX_PORTS;
+ break;
+ }
+ return 0;
+
+}
+#endif
+
+#if defined(MV_INCLUDE_XOR)
+/*******************************************************************************
+* mvCtrlXorMaxChanGet - Get Marvell controller number of XOR channels.
+*
+* DESCRIPTION:
+* This function returns Marvell controller number of XOR channels.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Marvell controller number of XOR channels.
+*
+*******************************************************************************/
+MV_U32 mvCtrlXorMaxChanGet(MV_VOID)
+{
+ return MV_XOR_MAX_CHAN;
+}
+#endif
+
+#if defined(MV_INCLUDE_USB)
+/*******************************************************************************
+* mvCtrlUsbHostMaxGet - Get number of Marvell Usb controllers
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* returns number of Marvell USB controllers.
+*
+*******************************************************************************/
+MV_U32 mvCtrlUsbMaxGet(void)
+{
+ return MV_USB_MAX_PORTS;
+}
+#endif
+
+
+#if defined(MV_INCLUDE_NAND)
+/*******************************************************************************
+* mvCtrlNandSupport - Return if this controller has integrated NAND flash support
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if NAND is supported and MV_FALSE otherwise
+*
+*******************************************************************************/
+MV_U32 mvCtrlNandSupport(MV_VOID)
+{
+ MV_U32 devId;
+
+ devId = mvCtrlModelGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ return MV_6281_NAND;
+ break;
+ case MV_6192_DEV_ID:
+ return MV_6192_NAND;
+ break;
+ case MV_6190_DEV_ID:
+ return MV_6190_NAND;
+ break;
+ case MV_6180_DEV_ID:
+ return MV_6180_NAND;
+ break;
+ }
+ return 0;
+
+}
+#endif
+
+#if defined(MV_INCLUDE_SDIO)
+/*******************************************************************************
+* mvCtrlSdioSupport - Return if this controller has integrated SDIO flash support
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if SDIO is supported and MV_FALSE otherwise
+*
+*******************************************************************************/
+MV_U32 mvCtrlSdioSupport(MV_VOID)
+{
+ MV_U32 devId;
+
+ devId = mvCtrlModelGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ return MV_6281_SDIO;
+ break;
+ case MV_6192_DEV_ID:
+ return MV_6192_SDIO;
+ break;
+ case MV_6190_DEV_ID:
+ return MV_6190_SDIO;
+ break;
+ case MV_6180_DEV_ID:
+ return MV_6180_SDIO;
+ break;
+ }
+ return 0;
+
+}
+#endif
+
+#if defined(MV_INCLUDE_TS)
+/*******************************************************************************
+* mvCtrlTsSupport - Return if this controller has integrated TS flash support
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if TS is supported and MV_FALSE otherwise
+*
+*******************************************************************************/
+MV_U32 mvCtrlTsSupport(MV_VOID)
+{
+ MV_U32 devId;
+
+ devId = mvCtrlModelGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ return MV_6281_TS;
+ break;
+ case MV_6192_DEV_ID:
+ return MV_6192_TS;
+ break;
+ case MV_6190_DEV_ID:
+ return MV_6190_TS;
+ break;
+ case MV_6180_DEV_ID:
+ return MV_6180_TS;
+ break;
+ }
+ return 0;
+}
+#endif
+
+#if defined(MV_INCLUDE_AUDIO)
+/*******************************************************************************
+* mvCtrlAudioSupport - Return if this controller has integrated AUDIO flash support
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if AUDIO is supported and MV_FALSE otherwise
+*
+*******************************************************************************/
+MV_U32 mvCtrlAudioSupport(MV_VOID)
+{
+ MV_U32 devId;
+
+ devId = mvCtrlModelGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ return MV_6281_AUDIO;
+ break;
+ case MV_6192_DEV_ID:
+ return MV_6192_AUDIO;
+ break;
+ case MV_6190_DEV_ID:
+ return MV_6190_AUDIO;
+ break;
+ case MV_6180_DEV_ID:
+ return MV_6180_AUDIO;
+ break;
+ }
+ return 0;
+
+}
+#endif
+
+#if defined(MV_INCLUDE_TDM)
+/*******************************************************************************
+* mvCtrlTdmSupport - Return if this controller has integrated TDM flash support
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if TDM is supported and MV_FALSE otherwise
+*
+*******************************************************************************/
+MV_U32 mvCtrlTdmSupport(MV_VOID)
+{
+ MV_U32 devId;
+
+ devId = mvCtrlModelGet();
+
+ switch(devId){
+ case MV_6281_DEV_ID:
+ return MV_6281_TDM;
+ break;
+ case MV_6192_DEV_ID:
+ return MV_6192_TDM;
+ break;
+ case MV_6190_DEV_ID:
+ return MV_6190_TDM;
+ break;
+ case MV_6180_DEV_ID:
+ return MV_6180_TDM;
+ break;
+ }
+ return 0;
+
+}
+#endif
+
+/*******************************************************************************
+* mvCtrlModelGet - Get Marvell controller device model (Id)
+*
+* DESCRIPTION:
+* This function returns 16bit describing the device model (ID) as defined
+* in PCI Device and Vendor ID configuration register offset 0x0.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 16bit desscribing Marvell controller ID
+*
+*******************************************************************************/
+MV_U16 mvCtrlModelGet(MV_VOID)
+{
+ MV_U32 devId;
+
+ devId = MV_REG_READ(CHIP_BOND_REG);
+ devId &= PCKG_OPT_MASK;
+
+ switch(devId){
+ case 2:
+ return MV_6281_DEV_ID;
+ break;
+ case 1:
+ if (((MV_REG_READ(PEX_CFG_DIRECT_ACCESS(0,PEX_DEVICE_AND_VENDOR_ID))& 0xffff0000) >> 16)
+ == MV_6190_DEV_ID)
+ return MV_6190_DEV_ID;
+ else
+ return MV_6192_DEV_ID;
+ break;
+ case 0:
+ return MV_6180_DEV_ID;
+ break;
+ }
+
+ return 0;
+}
+/*******************************************************************************
+* mvCtrlRevGet - Get Marvell controller device revision number
+*
+* DESCRIPTION:
+* This function returns 8bit describing the device revision as defined
+* in PCI Express Class Code and Revision ID Register.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 8bit desscribing Marvell controller revision number
+*
+*******************************************************************************/
+MV_U8 mvCtrlRevGet(MV_VOID)
+{
+ MV_U8 revNum;
+#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
+ /* Check pex power state */
+ MV_U32 pexPower;
+ pexPower = mvCtrlPwrClckGet(PEX_UNIT_ID,0);
+ if (pexPower == MV_FALSE)
+ mvCtrlPwrClckSet(PEX_UNIT_ID, 0, MV_TRUE);
+#endif
+ revNum = (MV_U8)MV_REG_READ(PEX_CFG_DIRECT_ACCESS(0,PCI_CLASS_CODE_AND_REVISION_ID));
+#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
+ /* Return to power off state */
+ if (pexPower == MV_FALSE)
+ mvCtrlPwrClckSet(PEX_UNIT_ID, 0, MV_FALSE);
+#endif
+ return ((revNum & PCCRIR_REVID_MASK) >> PCCRIR_REVID_OFFS);
+}
+
+/*******************************************************************************
+* mvCtrlNameGet - Get Marvell controller name
+*
+* DESCRIPTION:
+* This function returns a string describing the device model and revision.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* pNameBuff - Buffer to contain device name string. Minimum size 30 chars.
+*
+* RETURN:
+*
+* MV_ERROR if informantion can not be read.
+*******************************************************************************/
+MV_STATUS mvCtrlNameGet(char *pNameBuff)
+{
+ mvOsSPrintf (pNameBuff, "%s%x Rev %d", SOC_NAME_PREFIX,
+ mvCtrlModelGet(), mvCtrlRevGet());
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCtrlModelRevGet - Get Controller Model (Device ID) and Revision
+*
+* DESCRIPTION:
+* This function returns 32bit value describing both Device ID and Revision
+* as defined in PCI Express Device and Vendor ID Register and device revision
+* as defined in PCI Express Class Code and Revision ID Register.
+
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit describing both controller device ID and revision number
+*
+*******************************************************************************/
+MV_U32 mvCtrlModelRevGet(MV_VOID)
+{
+ return ((mvCtrlModelGet() << 16) | mvCtrlRevGet());
+}
+
+/*******************************************************************************
+* mvCtrlModelRevNameGet - Get Marvell controller name
+*
+* DESCRIPTION:
+* This function returns a string describing the device model and revision.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* pNameBuff - Buffer to contain device name string. Minimum size 30 chars.
+*
+* RETURN:
+*
+* MV_ERROR if informantion can not be read.
+*******************************************************************************/
+
+MV_STATUS mvCtrlModelRevNameGet(char *pNameBuff)
+{
+
+ switch (mvCtrlModelRevGet())
+ {
+ case MV_6281_A0_ID:
+ mvOsSPrintf (pNameBuff, "%s",MV_6281_A0_NAME);
+ break;
+ case MV_6192_A0_ID:
+ mvOsSPrintf (pNameBuff, "%s",MV_6192_A0_NAME);
+ break;
+ case MV_6180_A0_ID:
+ mvOsSPrintf (pNameBuff, "%s",MV_6180_A0_NAME);
+ break;
+ case MV_6190_A0_ID:
+ mvOsSPrintf (pNameBuff, "%s",MV_6190_A0_NAME);
+ break;
+ case MV_6281_A1_ID:
+ mvOsSPrintf (pNameBuff, "%s",MV_6281_A1_NAME);
+ break;
+ case MV_6192_A1_ID:
+ mvOsSPrintf (pNameBuff, "%s",MV_6192_A1_NAME);
+ break;
+ case MV_6180_A1_ID:
+ mvOsSPrintf (pNameBuff, "%s",MV_6180_A1_NAME);
+ break;
+ case MV_6190_A1_ID:
+ mvOsSPrintf (pNameBuff, "%s",MV_6190_A1_NAME);
+ break;
+ default:
+ mvCtrlNameGet(pNameBuff);
+ break;
+ }
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* ctrlWinOverlapTest - Test address windows for overlaping.
+*
+* DESCRIPTION:
+* This function checks the given two address windows for overlaping.
+*
+* INPUT:
+* pAddrWin1 - Address window 1.
+* pAddrWin2 - Address window 2.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+* MV_TRUE if address window overlaps, MV_FALSE otherwise.
+*******************************************************************************/
+MV_STATUS ctrlWinOverlapTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2)
+{
+ MV_U32 winBase1, winBase2;
+ MV_U32 winTop1, winTop2;
+
+ /* check if we have overflow than 4G*/
+ if (((0xffffffff - pAddrWin1->baseLow) < pAddrWin1->size-1)||
+ ((0xffffffff - pAddrWin2->baseLow) < pAddrWin2->size-1))
+ {
+ return MV_TRUE;
+ }
+
+ winBase1 = pAddrWin1->baseLow;
+ winBase2 = pAddrWin2->baseLow;
+ winTop1 = winBase1 + pAddrWin1->size-1;
+ winTop2 = winBase2 + pAddrWin2->size-1;
+
+
+ if (((winBase1 <= winTop2 ) && ( winTop2 <= winTop1)) ||
+ ((winBase1 <= winBase2) && (winBase2 <= winTop1)))
+ {
+ return MV_TRUE;
+ }
+ else
+ {
+ return MV_FALSE;
+ }
+}
+
+/*******************************************************************************
+* ctrlWinWithinWinTest - Test address windows for overlaping.
+*
+* DESCRIPTION:
+* This function checks the given win1 boundries is within
+* win2 boundries.
+*
+* INPUT:
+* pAddrWin1 - Address window 1.
+* pAddrWin2 - Address window 2.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+* MV_TRUE if found win1 inside win2, MV_FALSE otherwise.
+*******************************************************************************/
+MV_STATUS ctrlWinWithinWinTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2)
+{
+ MV_U32 winBase1, winBase2;
+ MV_U32 winTop1, winTop2;
+
+ winBase1 = pAddrWin1->baseLow;
+ winBase2 = pAddrWin2->baseLow;
+ winTop1 = winBase1 + pAddrWin1->size -1;
+ winTop2 = winBase2 + pAddrWin2->size -1;
+
+ if (((winBase1 >= winBase2 ) && ( winBase1 <= winTop2)) ||
+ ((winTop1 >= winBase2) && (winTop1 <= winTop2)))
+ {
+ return MV_TRUE;
+ }
+ else
+ {
+ return MV_FALSE;
+ }
+}
+
+static const char* cntrlName[] = TARGETS_NAME_ARRAY;
+
+/*******************************************************************************
+* mvCtrlTargetNameGet - Get Marvell controller target name
+*
+* DESCRIPTION:
+* This function convert the trget enumeration to string.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Target name (const MV_8 *)
+*******************************************************************************/
+const MV_8* mvCtrlTargetNameGet( MV_TARGET target )
+{
+
+ if (target >= MAX_TARGETS)
+ {
+ return "target unknown";
+ }
+
+ return cntrlName[target];
+}
+
+/*******************************************************************************
+* mvCtrlAddrDecShow - Print the Controller units address decode map.
+*
+* DESCRIPTION:
+* This function the Controller units address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvCtrlAddrDecShow(MV_VOID)
+{
+ mvCpuIfAddDecShow();
+ mvAhbToMbusAddDecShow();
+#if defined(MV_INCLUDE_PEX)
+ mvPexAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_USB)
+ mvUsbAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_GIG_ETH)
+ mvEthAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_XOR)
+ mvXorAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_SATA)
+ mvSataAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+ mvAudioAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_TS)
+ mvTsuAddrDecShow();
+#endif
+}
+
+/*******************************************************************************
+* ctrlSizeToReg - Extract size value for register assignment.
+*
+* DESCRIPTION:
+* Address decode size parameter must be programed from LSB to MSB as
+* sequence of 1's followed by sequence of 0's. The number of 1's
+* specifies the size of the window in 64 KB granularity (e.g. a
+* value of 0x00ff specifies 256x64k = 16 MB).
+* This function extract the size value from the size parameter according
+* to given aligment paramter. For example for size 0x1000000 (16MB) and
+* aligment 0x10000 (64KB) the function will return 0x00FF.
+*
+* INPUT:
+* size - Size.
+* alignment - Size alignment. Note that alignment must be power of 2!
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit describing size register value correspond to size parameter.
+* If value is '-1' size parameter or aligment are invalid.
+*******************************************************************************/
+MV_U32 ctrlSizeToReg(MV_U32 size, MV_U32 alignment)
+{
+ MV_U32 retVal;
+
+ /* Check size parameter alignment */
+ if ((0 == size) || (MV_IS_NOT_ALIGN(size, alignment)))
+ {
+ DB(mvOsPrintf("ctrlSizeToReg: ERR. Size is zero or not aligned.\n"));
+ return -1;
+ }
+
+ /* Take out the "alignment" portion out of the size parameter */
+ alignment--; /* Now the alignmet is a sequance of '1' (e.g. 0xffff) */
+ /* and size is 0x1000000 (16MB) for example */
+ while(alignment & 1) /* Check that alignmet LSB is set */
+ {
+ size = (size >> 1); /* If LSB is set, move 'size' one bit to right */
+ alignment = (alignment >> 1);
+ }
+
+ /* If after the alignment first '0' was met we still have '1' in */
+ /* it then aligment is invalid (not power of 2) */
+ if (alignment)
+ {
+ DB(mvOsPrintf("ctrlSizeToReg: ERR. Alignment parameter 0x%x invalid.\n",
+ (MV_U32)alignment));
+ return -1;
+ }
+
+ /* Now the size is shifted right according to aligment: 0x0100 */
+ size--; /* Now the size is a sequance of '1': 0x00ff */
+
+ retVal = size ;
+
+ /* Check that LSB to MSB is sequence of 1's followed by sequence of 0's */
+ while(size & 1) /* Check that LSB is set */
+ {
+ size = (size >> 1); /* If LSB is set, move one bit to the right */
+ }
+
+ if (size) /* Sequance of 1's is over. Check that we have no other 1's */
+ {
+ DB(mvOsPrintf("ctrlSizeToReg: ERR. Size parameter 0x%x invalid.\n",
+ size));
+ return -1;
+ }
+
+ return retVal;
+
+}
+
+/*******************************************************************************
+* ctrlRegToSize - Extract size value from register value.
+*
+* DESCRIPTION:
+* This function extract a size value from the register size parameter
+* according to given aligment paramter. For example for register size
+* value 0xff and aligment 0x10000 the function will return 0x01000000.
+*
+* INPUT:
+* regSize - Size as in register format. See ctrlSizeToReg.
+* alignment - Size alignment. Note that alignment must be power of 2!
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit describing size.
+* If value is '-1' size parameter or aligment are invalid.
+*******************************************************************************/
+MV_U32 ctrlRegToSize(MV_U32 regSize, MV_U32 alignment)
+{
+ MV_U32 temp;
+
+ /* Check that LSB to MSB is sequence of 1's followed by sequence of 0's */
+ temp = regSize; /* Now the size is a sequance of '1': 0x00ff */
+
+ while(temp & 1) /* Check that LSB is set */
+ {
+ temp = (temp >> 1); /* If LSB is set, move one bit to the right */
+ }
+
+ if (temp) /* Sequance of 1's is over. Check that we have no other 1's */
+ {
+ DB(mvOsPrintf("ctrlRegToSize: ERR. Size parameter 0x%x invalid.\n",
+ regSize));
+ return -1;
+ }
+
+
+ /* Check that aligment is a power of two */
+ temp = alignment - 1;/* Now the alignmet is a sequance of '1' (0xffff) */
+
+ while(temp & 1) /* Check that alignmet LSB is set */
+ {
+ temp = (temp >> 1); /* If LSB is set, move 'size' one bit to right */
+ }
+
+ /* If after the 'temp' first '0' was met we still have '1' in 'temp' */
+ /* then 'temp' is invalid (not power of 2) */
+ if (temp)
+ {
+ DB(mvOsPrintf("ctrlSizeToReg: ERR. Alignment parameter 0x%x invalid.\n",
+ alignment));
+ return -1;
+ }
+
+ regSize++; /* Now the size is 0x0100 */
+
+ /* Add in the "alignment" portion to the register size parameter */
+ alignment--; /* Now the alignmet is a sequance of '1' (e.g. 0xffff) */
+
+ while(alignment & 1) /* Check that alignmet LSB is set */
+ {
+ regSize = (regSize << 1); /* LSB is set, move 'size' one bit left */
+ alignment = (alignment >> 1);
+ }
+
+ return regSize;
+}
+
+
+/*******************************************************************************
+* ctrlSizeRegRoundUp - Round up given size
+*
+* DESCRIPTION:
+* This function round up a given size to a size that fits the
+* restrictions of size format given an aligment parameter.
+* to given aligment paramter. For example for size parameter 0xa1000 and
+* aligment 0x1000 the function will return 0xFF000.
+*
+* INPUT:
+* size - Size.
+* alignment - Size alignment. Note that alignment must be power of 2!
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit describing size value correspond to size in register.
+*******************************************************************************/
+MV_U32 ctrlSizeRegRoundUp(MV_U32 size, MV_U32 alignment)
+{
+ MV_U32 msbBit = 0;
+ MV_U32 retSize;
+
+ /* Check if size parameter is already comply with restriction */
+ if (!(-1 == ctrlSizeToReg(size, alignment)))
+ {
+ return size;
+ }
+
+ while(size)
+ {
+ size = (size >> 1);
+ msbBit++;
+ }
+
+ retSize = (1 << msbBit);
+
+ if (retSize < alignment)
+ {
+ return alignment;
+ }
+ else
+ {
+ return retSize;
+ }
+}
+/*******************************************************************************
+* mvCtrlSysRstLengthCounterGet - Return number of milliseconds the reset button
+* was pressed and clear counter
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN: number of milliseconds the reset button was pressed
+*******************************************************************************/
+MV_U32 mvCtrlSysRstLengthCounterGet(MV_VOID)
+{
+ static volatile MV_U32 Count = 0;
+
+ if(!Count) {
+ Count = (MV_REG_READ(SYSRST_LENGTH_COUNTER_REG) & SLCR_COUNT_MASK);
+ Count = (Count / (MV_BOARD_REFCLK_25MHZ / 1000));
+ /* clear counter for next boot */
+ MV_REG_BIT_SET(SYSRST_LENGTH_COUNTER_REG, SLCR_CLR_MASK);
+ }
+
+ DB(mvOsPrintf("mvCtrlSysRstLengthCounterGet: Reset button was pressed for %u milliseconds\n", Count));
+
+ return Count;
+}
+
+MV_BOOL mvCtrlIsBootFromSPI(MV_VOID)
+{
+ MV_U32 satr = 0;
+ satr = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+ if(mvCtrlModelGet() == MV_6180_DEV_ID)
+ {
+ if (MSAR_BOOT_MODE_6180(satr) == MSAR_BOOT_SPI_WITH_BOOTROM_6180)
+ return MV_TRUE;
+ else
+ return MV_FALSE;
+ }
+ satr = satr & MSAR_BOOT_MODE_MASK;
+ if (satr == MSAR_BOOT_SPI_WITH_BOOTROM)
+ return MV_TRUE;
+ else
+ return MV_FALSE;
+}
+
+MV_BOOL mvCtrlIsBootFromSPIUseNAND(MV_VOID)
+{
+ MV_U32 satr = 0;
+ if(mvCtrlModelGet() == MV_6180_DEV_ID)
+ return MV_FALSE;
+ satr = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+ satr = satr & MSAR_BOOT_MODE_MASK;
+
+ if (satr == MSAR_BOOT_SPI_USE_NAND_WITH_BOOTROM)
+ return MV_TRUE;
+ else
+ return MV_FALSE;
+}
+
+MV_BOOL mvCtrlIsBootFromNAND(MV_VOID)
+{
+ MV_U32 satr = 0;
+ satr = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+ if(mvCtrlModelGet() == MV_6180_DEV_ID)
+ {
+ if (MSAR_BOOT_MODE_6180(satr) == MSAR_BOOT_NAND_WITH_BOOTROM_6180)
+ return MV_TRUE;
+ else
+ return MV_FALSE;
+ }
+ satr = satr & MSAR_BOOT_MODE_MASK;
+ if ((satr == MSAR_BOOT_NAND_WITH_BOOTROM))
+ return MV_TRUE;
+ else
+ return MV_FALSE;
+}
+
+#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
+/*******************************************************************************
+* mvCtrlPwrSaveOn - Set Power save mode
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*******************************************************************************/
+MV_VOID mvCtrlPwrSaveOn(MV_VOID)
+{
+ unsigned long old,temp;
+ /* Disable int */
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "orr %1, %0, #0xc0\n"
+ "msr cpsr_c, %1"
+ : "=r" (old), "=r" (temp)
+ :
+ : "memory");
+
+ /* Set SoC in power save */
+ MV_REG_BIT_SET(POWER_MNG_CTRL_REG, BIT11);
+ /* Wait for int */
+ __asm__ __volatile__("mcr p15, 0, r0, c7, c0, 4");
+
+ /* Enabled int */
+ __asm__ __volatile__("msr cpsr_c, %0"
+ :
+ : "r" (old)
+ : "memory");
+}
+
+
+
+/*******************************************************************************
+* mvCtrlPwrSaveOff - Go out of power save mode
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*******************************************************************************/
+MV_VOID mvCtrlPwrSaveOff(MV_VOID)
+{
+ unsigned long old,temp;
+ /* Disable int */
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "orr %1, %0, #0xc0\n"
+ "msr cpsr_c, %1"
+ : "=r" (old), "=r" (temp)
+ :
+ : "memory");
+
+ /* Set SoC in power save */
+ MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, BIT11);
+ /* Wait for int */
+ __asm__ __volatile__("mcr p15, 0, r0, c7, c0, 4");
+
+ /* Enabled int */
+ __asm__ __volatile__("msr cpsr_c, %0"
+ :
+ : "r" (old)
+ : "memory");
+}
+
+/*******************************************************************************
+* mvCtrlPwrClckSet - Set Power State for specific Unit
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*******************************************************************************/
+MV_VOID mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable)
+{
+ switch (unitId)
+ {
+#if defined(MV_INCLUDE_PEX)
+ case PEX_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_PEXSTOPCLOCK_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_PEXSTOPCLOCK_MASK);
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_GIG_ETH)
+ case ETH_GIG_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_GESTOPCLOCK_MASK(index));
+ }
+ else
+ {
+ MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_GESTOPCLOCK_MASK(index));
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_INTEG_SATA)
+ case SATA_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SATASTOPCLOCK_MASK(index));
+ }
+ else
+ {
+ MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SATASTOPCLOCK_MASK(index));
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_CESA)
+ case CESA_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SESTOPCLOCK_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SESTOPCLOCK_MASK);
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_USB)
+ case USB_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_USBSTOPCLOCK_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_USBSTOPCLOCK_MASK);
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+ case AUDIO_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_AUDIOSTOPCLOCK_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_AUDIOSTOPCLOCK_MASK);
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_TS)
+ case TS_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_TSSTOPCLOCK_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_TSSTOPCLOCK_MASK);
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_SDIO)
+ case SDIO_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SDIOSTOPCLOCK_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SDIOSTOPCLOCK_MASK);
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_TDM)
+ case TDM_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_TDMSTOPCLOCK_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_TDMSTOPCLOCK_MASK);
+ }
+ break;
+#endif
+
+ default:
+
+ break;
+
+ }
+}
+
+/*******************************************************************************
+* mvCtrlPwrClckGet - Get Power State of specific Unit
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+******************************************************************************/
+MV_BOOL mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index)
+{
+ MV_U32 reg = MV_REG_READ(POWER_MNG_CTRL_REG);
+ MV_BOOL state = MV_TRUE;
+
+ switch (unitId)
+ {
+#if defined(MV_INCLUDE_PEX)
+ case PEX_UNIT_ID:
+ if ((reg & PMC_PEXSTOPCLOCK_MASK) == PMC_PEXSTOPCLOCK_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+
+ break;
+#endif
+#if defined(MV_INCLUDE_GIG_ETH)
+ case ETH_GIG_UNIT_ID:
+ if ((reg & PMC_GESTOPCLOCK_MASK(index)) == PMC_GESTOPCLOCK_STOP(index))
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_SATA)
+ case SATA_UNIT_ID:
+ if ((reg & PMC_SATASTOPCLOCK_MASK(index)) == PMC_SATASTOPCLOCK_STOP(index))
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_CESA)
+ case CESA_UNIT_ID:
+ if ((reg & PMC_SESTOPCLOCK_MASK) == PMC_SESTOPCLOCK_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_USB)
+ case USB_UNIT_ID:
+ if ((reg & PMC_USBSTOPCLOCK_MASK) == PMC_USBSTOPCLOCK_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+ case AUDIO_UNIT_ID:
+ if ((reg & PMC_AUDIOSTOPCLOCK_MASK) == PMC_AUDIOSTOPCLOCK_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_TS)
+ case TS_UNIT_ID:
+ if ((reg & PMC_TSSTOPCLOCK_MASK) == PMC_TSSTOPCLOCK_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_SDIO)
+ case SDIO_UNIT_ID:
+ if ((reg & PMC_SDIOSTOPCLOCK_MASK)== PMC_SDIOSTOPCLOCK_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_TDM)
+ case TDM_UNIT_ID:
+ if ((reg & PMC_TDMSTOPCLOCK_MASK) == PMC_TDMSTOPCLOCK_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+
+ default:
+ state = MV_TRUE;
+ break;
+ }
+
+
+ return state;
+}
+/*******************************************************************************
+* mvCtrlPwrMemSet - Set Power State for memory on specific Unit
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*******************************************************************************/
+MV_VOID mvCtrlPwrMemSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable)
+{
+ switch (unitId)
+ {
+#if defined(MV_INCLUDE_PEX)
+ case PEX_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_PEXSTOPMEM_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_PEXSTOPMEM_MASK);
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_GIG_ETH)
+ case ETH_GIG_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_GESTOPMEM_MASK(index));
+ }
+ else
+ {
+ MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_GESTOPMEM_MASK(index));
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_INTEG_SATA)
+ case SATA_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_SATASTOPMEM_MASK(index));
+ }
+ else
+ {
+ MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_SATASTOPMEM_MASK(index));
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_CESA)
+ case CESA_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_SESTOPMEM_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_SESTOPMEM_MASK);
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_USB)
+ case USB_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_USBSTOPMEM_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_USBSTOPMEM_MASK);
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+ case AUDIO_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_AUDIOSTOPMEM_MASK);
+ }
+ else
+ {
+ MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_AUDIOSTOPMEM_MASK);
+ }
+ break;
+#endif
+#if defined(MV_INCLUDE_XOR)
+ case XOR_UNIT_ID:
+ if (enable == MV_FALSE)
+ {
+ MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_XORSTOPMEM_MASK(index));
+ }
+ else
+ {
+ MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_XORSTOPMEM_MASK(index));
+ }
+ break;
+#endif
+ default:
+
+ break;
+
+ }
+}
+
+/*******************************************************************************
+* mvCtrlPwrMemGet - Get Power State of memory on specific Unit
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+******************************************************************************/
+MV_BOOL mvCtrlPwrMemGet(MV_UNIT_ID unitId, MV_U32 index)
+{
+ MV_U32 reg = MV_REG_READ(POWER_MNG_MEM_CTRL_REG);
+ MV_BOOL state = MV_TRUE;
+
+ switch (unitId)
+ {
+#if defined(MV_INCLUDE_PEX)
+ case PEX_UNIT_ID:
+ if ((reg & PMC_PEXSTOPMEM_MASK) == PMC_PEXSTOPMEM_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+
+ break;
+#endif
+#if defined(MV_INCLUDE_GIG_ETH)
+ case ETH_GIG_UNIT_ID:
+ if ((reg & PMC_GESTOPMEM_MASK(index)) == PMC_GESTOPMEM_STOP(index))
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_SATA)
+ case SATA_UNIT_ID:
+ if ((reg & PMC_SATASTOPMEM_MASK(index)) == PMC_SATASTOPMEM_STOP(index))
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_CESA)
+ case CESA_UNIT_ID:
+ if ((reg & PMC_SESTOPMEM_MASK) == PMC_SESTOPMEM_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_USB)
+ case USB_UNIT_ID:
+ if ((reg & PMC_USBSTOPMEM_MASK) == PMC_USBSTOPMEM_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+ case AUDIO_UNIT_ID:
+ if ((reg & PMC_AUDIOSTOPMEM_MASK) == PMC_AUDIOSTOPMEM_STOP)
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+#if defined(MV_INCLUDE_XOR)
+ case XOR_UNIT_ID:
+ if ((reg & PMC_XORSTOPMEM_MASK(index)) == PMC_XORSTOPMEM_STOP(index))
+ {
+ state = MV_FALSE;
+ }
+ else state = MV_TRUE;
+ break;
+#endif
+
+ default:
+ state = MV_TRUE;
+ break;
+ }
+
+
+ return state;
+}
+#else
+MV_VOID mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable) {return;}
+MV_BOOL mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index) {return MV_TRUE;}
+#endif /* #if defined(MV_INCLUDE_CLK_PWR_CNTRL) */
+
+
+/*******************************************************************************
+* mvMPPConfigToSPI - Change MPP[3:0] configuration to SPI mode
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+******************************************************************************/
+MV_VOID mvMPPConfigToSPI(MV_VOID)
+{
+ MV_U32 mppVal = 0;
+ MV_U32 bootVal = 0;
+
+ if(!mvCtrlIsBootFromSPIUseNAND())
+ return;
+ mppVal = 0x00002220; /* Set MPP [3:1] to SPI mode */
+ bootVal = MV_REG_READ(mvCtrlMppRegGet(0));
+ bootVal &= 0xffff000f;
+ mppVal |= bootVal;
+
+ MV_REG_WRITE(mvCtrlMppRegGet(0), mppVal);
+}
+
+
+/*******************************************************************************
+* mvMPPConfigToDefault - Change MPP[7:0] configuration to default configuration
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+******************************************************************************/
+MV_VOID mvMPPConfigToDefault(MV_VOID)
+{
+ MV_U32 mppVal = 0;
+ MV_U32 bootVal = 0;
+
+ if(!mvCtrlIsBootFromSPIUseNAND())
+ return;
+ mppVal = mvBoardMppGet(0);
+ bootVal = MV_REG_READ(mvCtrlMppRegGet(0));
+ mppVal &= ~0xffff000f;
+ bootVal &= 0xffff000f;
+ mppVal |= bootVal;
+
+ MV_REG_WRITE(mvCtrlMppRegGet(0), mppVal);
+}
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCtrlEnvLibh
+#define __INCmvCtrlEnvLibh
+
+/* includes */
+#include "mvSysHwConfig.h"
+#include "mvCommon.h"
+#include "mvTypes.h"
+#include "mvOs.h"
+#include "boardEnv/mvBoardEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "ctrlEnv/mvCtrlEnvRegs.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+
+/* typedefs */
+
+/* This enumerator describes the possible HW cache coherency policies the */
+/* controllers supports. */
+typedef enum _mvCachePolicy
+{
+ NO_COHERENCY, /* No HW cache coherency support */
+ WT_COHERENCY, /* HW cache coherency supported in Write Through policy */
+ WB_COHERENCY /* HW cache coherency supported in Write Back policy */
+}MV_CACHE_POLICY;
+
+
+/* The swapping is referred to a 64-bit words (as this is the controller */
+/* internal data path width). This enumerator describes the possible */
+/* data swap types. Below is an example of the data 0x0011223344556677 */
+typedef enum _mvSwapType
+{
+ MV_BYTE_SWAP, /* Byte Swap 77 66 55 44 33 22 11 00 */
+ MV_NO_SWAP, /* No swapping 00 11 22 33 44 55 66 77 */
+ MV_BYTE_WORD_SWAP, /* Both byte and word swap 33 22 11 00 77 66 55 44 */
+ MV_WORD_SWAP, /* Word swap 44 55 66 77 00 11 22 33 */
+ SWAP_TYPE_MAX /* Delimiter for this enumerator */
+}MV_SWAP_TYPE;
+
+/* This structure describes access rights for Access protection windows */
+/* that can be found in IDMA, XOR, Ethernet and MPSC units. */
+/* Note that the permission enumerator coresponds to its register format. */
+/* For example, Read only premission is presented as "1" in register field. */
+typedef enum _mvAccessRights
+{
+ NO_ACCESS_ALLOWED = 0, /* No access allowed */
+ READ_ONLY = 1, /* Read only permission */
+ ACC_RESERVED = 2, /* Reserved access right */
+ FULL_ACCESS = 3, /* Read and Write permission */
+ MAX_ACC_RIGHTS
+}MV_ACCESS_RIGHTS;
+
+
+/* mcspLib.h API list */
+
+MV_STATUS mvCtrlEnvInit(MV_VOID);
+MV_U32 mvCtrlMppRegGet(MV_U32 mppGroup);
+
+#if defined(MV_INCLUDE_PEX)
+MV_U32 mvCtrlPexMaxIfGet(MV_VOID);
+#else
+#define mvCtrlPexMaxIfGet() (0)
+#endif
+
+#define mvCtrlPciIfMaxIfGet() (0)
+
+#if defined(MV_INCLUDE_GIG_ETH)
+MV_U32 mvCtrlEthMaxPortGet(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_XOR)
+MV_U32 mvCtrlXorMaxChanGet(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_USB)
+MV_U32 mvCtrlUsbMaxGet(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_NAND)
+MV_U32 mvCtrlNandSupport(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_SDIO)
+MV_U32 mvCtrlSdioSupport(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_TS)
+MV_U32 mvCtrlTsSupport(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+MV_U32 mvCtrlAudioSupport(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_TDM)
+MV_U32 mvCtrlTdmSupport(MV_VOID);
+#endif
+
+MV_U16 mvCtrlModelGet(MV_VOID);
+MV_U8 mvCtrlRevGet(MV_VOID);
+MV_STATUS mvCtrlNameGet(char *pNameBuff);
+MV_U32 mvCtrlModelRevGet(MV_VOID);
+MV_STATUS mvCtrlModelRevNameGet(char *pNameBuff);
+MV_VOID mvCtrlAddrDecShow(MV_VOID);
+const MV_8* mvCtrlTargetNameGet(MV_TARGET target);
+MV_U32 ctrlSizeToReg(MV_U32 size, MV_U32 alignment);
+MV_U32 ctrlRegToSize(MV_U32 regSize, MV_U32 alignment);
+MV_U32 ctrlSizeRegRoundUp(MV_U32 size, MV_U32 alignment);
+MV_U32 mvCtrlSysRstLengthCounterGet(MV_VOID);
+MV_STATUS ctrlWinOverlapTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2);
+MV_STATUS ctrlWinWithinWinTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2);
+
+MV_VOID mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable);
+MV_BOOL mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index);
+MV_VOID mvCtrlPwrMemSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable);
+MV_BOOL mvCtrlIsBootFromSPI(MV_VOID);
+MV_BOOL mvCtrlIsBootFromSPIUseNAND(MV_VOID);
+MV_BOOL mvCtrlIsBootFromNAND(MV_VOID);
+#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
+MV_VOID mvCtrlPwrSaveOn(MV_VOID);
+MV_VOID mvCtrlPwrSaveOff(MV_VOID);
+#endif
+MV_BOOL mvCtrlPwrMemGet(MV_UNIT_ID unitId, MV_U32 index);
+MV_VOID mvMPPConfigToSPI(MV_VOID);
+MV_VOID mvMPPConfigToDefault(MV_VOID);
+
+
+#endif /* __INCmvCtrlEnvLibh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvCtrlEnvRegsh
+#define __INCmvCtrlEnvRegsh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* CV Support */
+#define PEX0_MEM0 PEX0_MEM
+#define PCI0_MEM0 PEX0_MEM
+
+/* Controller revision info */
+#define PCI_CLASS_CODE_AND_REVISION_ID 0x008
+#define PCCRIR_REVID_OFFS 0 /* Revision ID */
+#define PCCRIR_REVID_MASK (0xff << PCCRIR_REVID_OFFS)
+
+/* Controler environment registers offsets */
+
+/* Power Managment Control */
+#define POWER_MNG_MEM_CTRL_REG 0x20118
+
+#define PMC_GESTOPMEM_OFFS(port) ((port)? 13 : 0)
+#define PMC_GESTOPMEM_MASK(port) (1 << PMC_GESTOPMEM_OFFS(port))
+#define PMC_GESTOPMEM_EN(port) (0 << PMC_GESTOPMEM_OFFS(port))
+#define PMC_GESTOPMEM_STOP(port) (1 << PMC_GESTOPMEM_OFFS(port))
+
+#define PMC_PEXSTOPMEM_OFFS 1
+#define PMC_PEXSTOPMEM_MASK (1 << PMC_PEXSTOPMEM_OFFS)
+#define PMC_PEXSTOPMEM_EN (0 << PMC_PEXSTOPMEM_OFFS)
+#define PMC_PEXSTOPMEM_STOP (1 << PMC_PEXSTOPMEM_OFFS)
+
+#define PMC_USBSTOPMEM_OFFS 2
+#define PMC_USBSTOPMEM_MASK (1 << PMC_USBSTOPMEM_OFFS)
+#define PMC_USBSTOPMEM_EN (0 << PMC_USBSTOPMEM_OFFS)
+#define PMC_USBSTOPMEM_STOP (1 << PMC_USBSTOPMEM_OFFS)
+
+#define PMC_DUNITSTOPMEM_OFFS 3
+#define PMC_DUNITSTOPMEM_MASK (1 << PMC_DUNITSTOPMEM_OFFS)
+#define PMC_DUNITSTOPMEM_EN (0 << PMC_DUNITSTOPMEM_OFFS)
+#define PMC_DUNITSTOPMEM_STOP (1 << PMC_DUNITSTOPMEM_OFFS)
+
+#define PMC_RUNITSTOPMEM_OFFS 4
+#define PMC_RUNITSTOPMEM_MASK (1 << PMC_RUNITSTOPMEM_OFFS)
+#define PMC_RUNITSTOPMEM_EN (0 << PMC_RUNITSTOPMEM_OFFS)
+#define PMC_RUNITSTOPMEM_STOP (1 << PMC_RUNITSTOPMEM_OFFS)
+
+#define PMC_XORSTOPMEM_OFFS(port) (5+(port*2))
+#define PMC_XORSTOPMEM_MASK(port) (1 << PMC_XORSTOPMEM_OFFS(port))
+#define PMC_XORSTOPMEM_EN(port) (0 << PMC_XORSTOPMEM_OFFS(port))
+#define PMC_XORSTOPMEM_STOP(port) (1 << PMC_XORSTOPMEM_OFFS(port))
+
+#define PMC_SATASTOPMEM_OFFS(port) (6+(port*5))
+#define PMC_SATASTOPMEM_MASK(port) (1 << PMC_SATASTOPMEM_OFFS(port))
+#define PMC_SATASTOPMEM_EN(port) (0 << PMC_SATASTOPMEM_OFFS(port))
+#define PMC_SATASTOPMEM_STOP(port) (1 << PMC_SATASTOPMEM_OFFS(port))
+
+#define PMC_SESTOPMEM_OFFS 8
+#define PMC_SESTOPMEM_MASK (1 << PMC_SESTOPMEM_OFFS)
+#define PMC_SESTOPMEM_EN (0 << PMC_SESTOPMEM_OFFS)
+#define PMC_SESTOPMEM_STOP (1 << PMC_SESTOPMEM_OFFS)
+
+#define PMC_AUDIOSTOPMEM_OFFS 9
+#define PMC_AUDIOSTOPMEM_MASK (1 << PMC_AUDIOSTOPMEM_OFFS)
+#define PMC_AUDIOSTOPMEM_EN (0 << PMC_AUDIOSTOPMEM_OFFS)
+#define PMC_AUDIOSTOPMEM_STOP (1 << PMC_AUDIOSTOPMEM_OFFS)
+
+#define POWER_MNG_CTRL_REG 0x2011C
+
+#define PMC_GESTOPCLOCK_OFFS(port) ((port)? 19 : 0)
+#define PMC_GESTOPCLOCK_MASK(port) (1 << PMC_GESTOPCLOCK_OFFS(port))
+#define PMC_GESTOPCLOCK_EN(port) (1 << PMC_GESTOPCLOCK_OFFS(port))
+#define PMC_GESTOPCLOCK_STOP(port) (0 << PMC_GESTOPCLOCK_OFFS(port))
+
+#define PMC_PEXPHYSTOPCLOCK_OFFS 1
+#define PMC_PEXPHYSTOPCLOCK_MASK (1 << PMC_PEXPHYSTOPCLOCK_OFFS)
+#define PMC_PEXPHYSTOPCLOCK_EN (1 << PMC_PEXPHYSTOPCLOCK_OFFS)
+#define PMC_PEXPHYSTOPCLOCK_STOP (0 << PMC_PEXPHYSTOPCLOCK_OFFS)
+
+#define PMC_PEXSTOPCLOCK_OFFS 2
+#define PMC_PEXSTOPCLOCK_MASK (1 << PMC_PEXSTOPCLOCK_OFFS)
+#define PMC_PEXSTOPCLOCK_EN (1 << PMC_PEXSTOPCLOCK_OFFS)
+#define PMC_PEXSTOPCLOCK_STOP (0 << PMC_PEXSTOPCLOCK_OFFS)
+
+#define PMC_USBSTOPCLOCK_OFFS 3
+#define PMC_USBSTOPCLOCK_MASK (1 << PMC_USBSTOPCLOCK_OFFS)
+#define PMC_USBSTOPCLOCK_EN (1 << PMC_USBSTOPCLOCK_OFFS)
+#define PMC_USBSTOPCLOCK_STOP (0 << PMC_USBSTOPCLOCK_OFFS)
+
+#define PMC_SDIOSTOPCLOCK_OFFS 4
+#define PMC_SDIOSTOPCLOCK_MASK (1 << PMC_SDIOSTOPCLOCK_OFFS)
+#define PMC_SDIOSTOPCLOCK_EN (1 << PMC_SDIOSTOPCLOCK_OFFS)
+#define PMC_SDIOSTOPCLOCK_STOP (0 << PMC_SDIOSTOPCLOCK_OFFS)
+
+#define PMC_TSSTOPCLOCK_OFFS 5
+#define PMC_TSSTOPCLOCK_MASK (1 << PMC_TSSTOPCLOCK_OFFS)
+#define PMC_TSSTOPCLOCK_EN (1 << PMC_TSSTOPCLOCK_OFFS)
+#define PMC_TSSTOPCLOCK_STOP (0 << PMC_TSSTOPCLOCK_OFFS)
+
+#define PMC_AUDIOSTOPCLOCK_OFFS 9
+#define PMC_AUDIOSTOPCLOCK_MASK (1 << PMC_AUDIOSTOPCLOCK_OFFS)
+#define PMC_AUDIOSTOPCLOCK_EN (1 << PMC_AUDIOSTOPCLOCK_OFFS)
+#define PMC_AUDIOSTOPCLOCK_STOP (0 << PMC_AUDIOSTOPCLOCK_OFFS)
+
+#define PMC_POWERSAVE_OFFS 11
+#define PMC_POWERSAVE_MASK (1 << PMC_POWERSAVE_OFFS)
+#define PMC_POWERSAVE_EN (1 << PMC_POWERSAVE_OFFS)
+#define PMC_POWERSAVE_STOP (0 << PMC_POWERSAVE_OFFS)
+
+
+
+
+#define PMC_SATASTOPCLOCK_OFFS(port) (14+(port))
+#define PMC_SATASTOPCLOCK_MASK(port) (1 << PMC_SATASTOPCLOCK_OFFS(port))
+#define PMC_SATASTOPCLOCK_EN(port) (1 << PMC_SATASTOPCLOCK_OFFS(port))
+#define PMC_SATASTOPCLOCK_STOP(port) (0 << PMC_SATASTOPCLOCK_OFFS(port))
+
+#define PMC_SESTOPCLOCK_OFFS 17
+#define PMC_SESTOPCLOCK_MASK (1 << PMC_SESTOPCLOCK_OFFS)
+#define PMC_SESTOPCLOCK_EN (1 << PMC_SESTOPCLOCK_OFFS)
+#define PMC_SESTOPCLOCK_STOP (0 << PMC_SESTOPCLOCK_OFFS)
+
+#define PMC_TDMSTOPCLOCK_OFFS 20
+#define PMC_TDMSTOPCLOCK_MASK (1 << PMC_TDMSTOPCLOCK_OFFS)
+#define PMC_TDMSTOPCLOCK_EN (1 << PMC_TDMSTOPCLOCK_OFFS)
+#define PMC_TDMSTOPCLOCK_STOP (0 << PMC_TDMSTOPCLOCK_OFFS)
+
+
+/* Controler environment registers offsets */
+#define MPP_CONTROL_REG0 0x10000
+#define MPP_CONTROL_REG1 0x10004
+#define MPP_CONTROL_REG2 0x10008
+#define MPP_CONTROL_REG3 0x1000C
+#define MPP_CONTROL_REG4 0x10010
+#define MPP_CONTROL_REG5 0x10014
+#define MPP_CONTROL_REG6 0x10018
+#define MPP_SAMPLE_AT_RESET 0x10030
+#define CHIP_BOND_REG 0x10034
+#define SYSRST_LENGTH_COUNTER_REG 0x10050
+#define SLCR_COUNT_OFFS 0
+#define SLCR_COUNT_MASK (0x1FFFFFFF << SLCR_COUNT_OFFS)
+#define SLCR_CLR_OFFS 31
+#define SLCR_CLR_MASK (1 << SLCR_CLR_OFFS)
+#define PCKG_OPT_MASK 0x3
+#define MPP_OUTPUT_DRIVE_REG 0x100E0
+#define MPP_RGMII0_OUTPUT_DRIVE_OFFS 7
+#define MPP_3_3_RGMII0_OUTPUT_DRIVE (0x0 << MPP_RGMII0_OUTPUT_DRIVE_OFFS)
+#define MPP_1_8_RGMII0_OUTPUT_DRIVE (0x1 << MPP_RGMII0_OUTPUT_DRIVE_OFFS)
+#define MPP_RGMII1_OUTPUT_DRIVE_OFFS 15
+#define MPP_3_3_RGMII1_OUTPUT_DRIVE (0x0 << MPP_RGMII1_OUTPUT_DRIVE_OFFS)
+#define MPP_1_8_RGMII1_OUTPUT_DRIVE (0x1 << MPP_RGMII1_OUTPUT_DRIVE_OFFS)
+
+#define MSAR_BOOT_MODE_OFFS 12
+#define MSAR_BOOT_MODE_MASK (0x7 << MSAR_BOOT_MODE_OFFS)
+#define MSAR_BOOT_NAND_WITH_BOOTROM (0x5 << MSAR_BOOT_MODE_OFFS)
+#define MSAR_BOOT_SPI_WITH_BOOTROM (0x4 << MSAR_BOOT_MODE_OFFS)
+#define MSAR_BOOT_SPI_USE_NAND_WITH_BOOTROM (0x2 << MSAR_BOOT_MODE_OFFS)
+
+#define MSAR_BOOT_MODE_6180(X) (((X & 0x3000) >> 12) | \
+ ((X & 0x2) << 1))
+#define MSAR_BOOT_SPI_WITH_BOOTROM_6180 0x1
+#define MSAR_BOOT_NAND_WITH_BOOTROM_6180 0x5
+
+#define MSAR_TCLCK_OFFS 21
+#define MSAR_TCLCK_MASK (0x1 << MSAR_TCLCK_OFFS)
+#define MSAR_TCLCK_166 (0x1 << MSAR_TCLCK_OFFS)
+#define MSAR_TCLCK_200 (0x0 << MSAR_TCLCK_OFFS)
+
+
+#define MSAR_CPUCLCK_EXTRACT(X) (((X & 0x2) >> 1) | ((X & 0x400000) >> 21) | \
+ ((X & 0x18) >> 1))
+
+#define MSAR_CPUCLCK_OFFS_6180 2
+#define MSAR_CPUCLCK_MASK_6180 (0x7 << MSAR_CPUCLCK_OFFS_6180)
+
+#define MSAR_DDRCLCK_RTIO_OFFS 5
+#define MSAR_DDRCLCK_RTIO_MASK (0xF << MSAR_DDRCLCK_RTIO_OFFS)
+
+#define MSAR_L2CLCK_EXTRACT(X) (((X & 0x600) >> 9) | ((X & 0x80000) >> 17))
+
+#ifndef MV_ASMLANGUAGE
+/* CPU clock for 6281,6192 0->Resereved */
+#define MV_CPU_CLCK_TBL { 0, 0, 0, 0, \
+ 600000000, 0, 800000000, 1000000000, \
+ 0, 1200000000, 0, 0, \
+ 1500000000, 0, 0, 0}
+
+/* DDR clock RATIO for 6281,6192 {0,0}->Reserved */
+#define MV_DDR_CLCK_RTIO_TBL {\
+ {0, 0}, {0, 0}, {2, 1}, {0, 0}, \
+ {3, 1}, {0, 0}, {4, 1}, {9, 2}, \
+ {5, 1}, {6, 1}, {0, 0}, {0, 0}, \
+ {0, 0}, {0, 0}, {0, 0}, {0, 0} \
+}
+
+/* L2 clock RATIO for 6281,6192 {1,1}->Reserved */
+#define MV_L2_CLCK_RTIO_TBL {\
+ {0, 0}, {2, 1}, {0, 0}, {3, 1}, \
+ {0, 0}, {0, 0}, {0, 0}, {0, 0} \
+}
+
+/* 6180 have different clk reset sampling */
+/* ARM CPU, DDR, L2 clock for 6180 {0,0,0}->Reserved */
+#define MV_CPU6180_DDR_L2_CLCK_TBL { \
+ {0, 0, 0 },\
+ {0, 0, 0 },\
+ {0, 0, 0 },\
+ {0, 0, 0 },\
+ {0, 0, 0 },\
+ {600000000, 200000000, 300000000 },\
+ {800000000, 200000000, 400000000 },\
+ {0, 0, 0 }\
+}
+
+
+
+/* These macros help units to identify a target Mbus Arbiter group */
+#define MV_TARGET_IS_DRAM(target) \
+ ((target >= SDRAM_CS0) && (target <= SDRAM_CS3))
+
+#define MV_TARGET_IS_PEX0(target) \
+ ((target >= PEX0_MEM) && (target <= PEX0_IO))
+
+#define MV_TARGET_IS_PEX1(target) 0
+
+#define MV_TARGET_IS_PEX(target) (MV_TARGET_IS_PEX0(target) || MV_TARGET_IS_PEX1(target))
+
+#define MV_TARGET_IS_DEVICE(target) \
+ ((target >= DEVICE_CS0) && (target <= DEVICE_CS3))
+
+#define MV_PCI_DRAM_BAR_TO_DRAM_TARGET(bar) 0
+
+#define MV_TARGET_IS_AS_BOOT(target) ((target) == (sampleAtResetTargetArray[ \
+ (mvCtrlModelGet() == MV_6180_DEV_ID)? MSAR_BOOT_MODE_6180 \
+ (MV_REG_READ(MPP_SAMPLE_AT_RESET)):((MV_REG_READ(MPP_SAMPLE_AT_RESET)\
+ & MSAR_BOOT_MODE_MASK) >> MSAR_BOOT_MODE_OFFS)]))
+
+
+#define MV_CHANGE_BOOT_CS(target) (((target) == DEV_BOOCS)?\
+ sampleAtResetTargetArray[(mvCtrlModelGet() == MV_6180_DEV_ID)? \
+ MSAR_BOOT_MODE_6180(MV_REG_READ(MPP_SAMPLE_AT_RESET)): \
+ ((MV_REG_READ(MPP_SAMPLE_AT_RESET) & MSAR_BOOT_MODE_MASK)\
+ >> MSAR_BOOT_MODE_OFFS)]:(target))
+
+#define TCLK_TO_COUNTER_RATIO 1 /* counters running in Tclk */
+
+#define BOOT_TARGETS_NAME_ARRAY { \
+ TBL_TERM, \
+ TBL_TERM, \
+ BOOT_ROM_CS, \
+ TBL_TERM, \
+ BOOT_ROM_CS, \
+ BOOT_ROM_CS, \
+ TBL_TERM, \
+ TBL_TERM \
+}
+
+#define BOOT_TARGETS_NAME_ARRAY_6180 { \
+ TBL_TERM, \
+ BOOT_ROM_CS, \
+ TBL_TERM, \
+ TBL_TERM, \
+ TBL_TERM, \
+ BOOT_ROM_CS, \
+ TBL_TERM, \
+ TBL_TERM \
+}
+
+
+/* For old competability */
+#define DEVICE_CS0 NFLASH_CS
+#define DEVICE_CS1 SPI_CS
+#define DEVICE_CS2 BOOT_ROM_CS
+#define DEVICE_CS3 DEV_BOOCS
+#define MV_BOOTDEVICE_INDEX 0
+
+#define START_DEV_CS DEV_CS0
+#define DEV_TO_TARGET(dev) ((dev) + DEVICE_CS0)
+
+#define PCI_IF0_MEM0 PEX0_MEM
+#define PCI_IF0_IO PEX0_IO
+
+
+/* This enumerator defines the Marvell controller target ID */
+typedef enum _mvTargetId
+{
+ DRAM_TARGET_ID = 0 , /* Port 0 -> DRAM interface */
+ DEV_TARGET_ID = 1, /* Port 1 -> Nand/SPI */
+ PEX0_TARGET_ID = 4 , /* Port 4 -> PCI Express0 */
+ CRYPT_TARGET_ID = 3 , /* Port 3 --> Crypto Engine */
+ SAGE_TARGET_ID = 12 , /* Port 12 -> SAGE Unit */
+ MAX_TARGETS_ID
+}MV_TARGET_ID;
+
+
+/* This enumerator described the possible Controller paripheral targets. */
+/* Controller peripherals are designated memory/IO address spaces that the */
+/* controller can access. They are also refered as "targets" */
+typedef enum _mvTarget
+{
+ TBL_TERM = -1, /* none valid target, used as targets list terminator*/
+ SDRAM_CS0, /* SDRAM chip select 0 */
+ SDRAM_CS1, /* SDRAM chip select 1 */
+ SDRAM_CS2, /* SDRAM chip select 2 */
+ SDRAM_CS3, /* SDRAM chip select 3 */
+ PEX0_MEM, /* PCI Express 0 Memory */
+ PEX0_IO, /* PCI Express 0 IO */
+ INTER_REGS, /* Internal registers */
+ NFLASH_CS, /* NFLASH_CS */
+ SPI_CS, /* SPI_CS */
+ BOOT_ROM_CS, /* BOOT_ROM_CS */
+ DEV_BOOCS, /* DEV_BOOCS */
+ CRYPT_ENG, /* Crypto Engine */
+#ifdef MV_INCLUDE_SAGE
+ SAGE_UNIT, /* SAGE Unit */
+#endif
+ MAX_TARGETS
+
+}MV_TARGET;
+
+#define TARGETS_DEF_ARRAY { \
+ {0x0E, DRAM_TARGET_ID }, /* SDRAM_CS0 */ \
+ {0x0D, DRAM_TARGET_ID }, /* SDRAM_CS1 */ \
+ {0x0B, DRAM_TARGET_ID }, /* SDRAM_CS0 */ \
+ {0x07, DRAM_TARGET_ID }, /* SDRAM_CS1 */ \
+ {0xE8, PEX0_TARGET_ID }, /* PEX0_MEM */ \
+ {0xE0, PEX0_TARGET_ID }, /* PEX0_IO */ \
+ {0xFF, 0xFF }, /* INTER_REGS */ \
+ {0x2F, DEV_TARGET_ID }, /* NFLASH_CS */ \
+ {0x1E, DEV_TARGET_ID }, /* SPI_CS */ \
+ {0x1D, DEV_TARGET_ID }, /* BOOT_ROM_CS */ \
+ {0x1E, DEV_TARGET_ID }, /* DEV_BOOCS */ \
+ {0x01, CRYPT_TARGET_ID}, /* CRYPT_ENG */ \
+ {0x00, SAGE_TARGET_ID } \
+}
+
+
+#define TARGETS_NAME_ARRAY { \
+ "SDRAM_CS0", /* SDRAM_CS0 */ \
+ "SDRAM_CS1", /* SDRAM_CS1 */ \
+ "SDRAM_CS2", /* SDRAM_CS2 */ \
+ "SDRAM_CS3", /* SDRAM_CS3 */ \
+ "PEX0_MEM", /* PEX0_MEM */ \
+ "PEX0_IO", /* PEX0_IO */ \
+ "INTER_REGS", /* INTER_REGS */ \
+ "NFLASH_CS", /* NFLASH_CS */ \
+ "SPI_CS", /* SPI_CS */ \
+ "BOOT_ROM_CS", /* BOOT_ROM_CS */ \
+ "DEV_BOOTCS", /* DEV_BOOCS */ \
+ "CRYPT_ENG", /* CRYPT_ENG */ \
+ "SAGE_UNIT" /* SAGE_UNIT */ \
+}
+#endif /* MV_ASMLANGUAGE */
+
+
+#endif
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvCtrlEnvSpech
+#define __INCmvCtrlEnvSpech
+
+#include "mvDeviceId.h"
+#include "mvSysHwConfig.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+#define MV_ARM_SOC
+#define SOC_NAME_PREFIX "MV88F"
+
+
+/* units base and port numbers */
+#ifdef MV_ASMLANGUAGE
+#define XOR_UNIT_BASE(unit) 0x60800
+#else
+#define MV_XOR_REG_BASE 0x60000
+#define XOR_UNIT_BASE(unit) ((unit)? 0x60900:0x60800)
+#endif
+
+#define TDM_REG_BASE 0xD0000
+#define USB_REG_BASE(dev) 0x50000
+#define AUDIO_REG_BASE 0xA0000
+#define SATA_REG_BASE 0x80000
+#define MV_CESA_REG_BASE 0x3D000
+#define MV_CESA_TDMA_REG_BASE 0x30000
+#define MV_SDIO_REG_BASE 0x90000
+#define MV_ETH_REG_BASE(port) (((port) == 0) ? 0x72000 : 0x76000)
+#define MV_UART_CHAN_BASE(chanNum) (0x12000 + (chanNum * 0x100))
+#define DRAM_BASE 0x0
+#define CNTMR_BASE 0x20300
+#define TWSI_SLAVE_BASE(chanNum) 0x11000
+#define PEX_IF_BASE(pexIf) 0x40000
+#define MPP_REG_BASE 0x10000
+#define TSU_GLOBAL_REG_BASE 0xB4000
+#define MAX_AHB_TO_MBUS_REG_BASE 0x20000
+
+#define INTER_REGS_SIZE _1M
+/* This define describes the TWSI interrupt bit and location */
+#define TWSI_CPU_MAIN_INT_CAUSE_REG 0x20200
+#define TWSI0_CPU_MAIN_INT_BIT (1<<29)
+#define TWSI_SPEED 100000
+
+#define MV_GPP_MAX_GROUP 2
+#define MV_CNTMR_MAX_COUNTER 2
+#define MV_UART_MAX_CHAN 2
+#define MV_XOR_MAX_UNIT 2
+#define MV_XOR_MAX_CHAN 4 /* total channels for all units together*/
+#define MV_XOR_MAX_CHAN_PER_UNIT 2 /* channels for units */
+#define MV_SATA_MAX_CHAN 2
+
+#define MV_6281_MPP_MAX_MODULE 2
+#define MV_6192_MPP_MAX_MODULE 1
+#define MV_6190_MPP_MAX_MODULE 1
+#define MV_6180_MPP_MAX_MODULE 2
+#define MV_6281_MPP_MAX_GROUP 7
+#define MV_6192_MPP_MAX_GROUP 4
+#define MV_6190_MPP_MAX_GROUP 4
+#define MV_6180_MPP_MAX_GROUP 3
+
+#define MV_DRAM_MAX_CS 4
+
+/* This define describes the maximum number of supported PCI\PCIX Interfaces*/
+#define MV_PCI_MAX_IF 0
+#define MV_PCI_START_IF 0
+
+/* This define describes the maximum number of supported PEX Interfaces */
+#define MV_INCLUDE_PEX0
+#define MV_DISABLE_PEX_DEVICE_BAR
+#define MV_PEX_MAX_IF 1
+#define MV_PEX_START_IF MV_PCI_MAX_IF
+
+/* This define describes the maximum number of supported PCI Interfaces */
+#define MV_PCI_IF_MAX_IF (MV_PEX_MAX_IF+MV_PCI_MAX_IF)
+
+#define MV_ETH_MAX_PORTS 2
+#define MV_6281_ETH_MAX_PORTS 2
+#define MV_6192_ETH_MAX_PORTS 2
+#define MV_6190_ETH_MAX_PORTS 1
+#define MV_6180_ETH_MAX_PORTS 1
+
+#define MV_IDMA_MAX_CHAN 0
+
+#define MV_USB_MAX_PORTS 1
+
+#define MV_USB_VERSION 1
+
+
+#define MV_6281_NAND 1
+#define MV_6192_NAND 1
+#define MV_6190_NAND 1
+#define MV_6180_NAND 0
+
+#define MV_6281_SDIO 1
+#define MV_6192_SDIO 1
+#define MV_6190_SDIO 1
+#define MV_6180_SDIO 1
+
+#define MV_6281_TS 1
+#define MV_6192_TS 1
+#define MV_6190_TS 0
+#define MV_6180_TS 0
+
+#define MV_6281_AUDIO 1
+#define MV_6192_AUDIO 1
+#define MV_6190_AUDIO 0
+#define MV_6180_AUDIO 1
+
+#define MV_6281_TDM 1
+#define MV_6192_TDM 1
+#define MV_6190_TDM 0
+#define MV_6180_TDM 0
+
+#define MV_DEVICE_MAX_CS 4
+
+/* Others */
+#define PEX_HOST_BUS_NUM(pciIf) (pciIf)
+#define PEX_HOST_DEV_NUM(pciIf) 0
+
+#define PCI_IO(pciIf) (PEX0_IO)
+#define PCI_MEM(pciIf, memNum) (PEX0_MEM0)
+/* CESA version #2: One channel, 2KB SRAM, TDMA */
+#if defined(MV_CESA_CHAIN_MODE_SUPPORT)
+ #define MV_CESA_VERSION 3
+#else
+#define MV_CESA_VERSION 2
+#endif
+#define MV_CESA_SRAM_SIZE 2*1024
+/* This define describes the maximum number of supported Ethernet ports */
+#define MV_ETH_VERSION 4
+#define MV_ETH_MAX_RXQ 8
+#define MV_ETH_MAX_TXQ 8
+#define MV_ETH_PORT_SGMII { MV_FALSE, MV_FALSE }
+/* This define describes the the support of USB */
+#define MV_USB_VERSION 1
+
+#define MV_INCLUDE_SDRAM_CS0
+#define MV_INCLUDE_SDRAM_CS1
+#define MV_INCLUDE_SDRAM_CS2
+#define MV_INCLUDE_SDRAM_CS3
+
+#define MV_INCLUDE_DEVICE_CS0
+#define MV_INCLUDE_DEVICE_CS1
+#define MV_INCLUDE_DEVICE_CS2
+#define MV_INCLUDE_DEVICE_CS3
+
+#define MPP_GROUP_1_TYPE {\
+ {0, 0, 0}, /* Reserved for AUTO */ \
+ {0x22220000, 0x22222222, 0x2222}, /* TDM */ \
+ {0x44440000, 0x00044444, 0x0000}, /* AUDIO */ \
+ {0x33330000, 0x33003333, 0x0033}, /* RGMII */ \
+ {0x33330000, 0x03333333, 0x0033}, /* GMII */ \
+ {0x11110000, 0x11111111, 0x0001}, /* TS */ \
+ {0x33330000, 0x33333333, 0x3333} /* MII */ \
+}
+
+#define MPP_GROUP_2_TYPE {\
+ {0, 0, 0}, /* Reserved for AUTO */ \
+ {0x22220000, 0x22222222, 0x22}, /* TDM */ \
+ {0x44440000, 0x00044444, 0x0}, /* AUDIO */ \
+ {0, 0, 0}, /* N_A */ \
+ {0, 0, 0}, /* N_A */ \
+ {0x11110000, 0x11111111, 0x01} /* TS */ \
+}
+
+#ifndef MV_ASMLANGUAGE
+
+/* This enumerator defines the Marvell Units ID */
+typedef enum _mvUnitId
+{
+ DRAM_UNIT_ID,
+ PEX_UNIT_ID,
+ ETH_GIG_UNIT_ID,
+ USB_UNIT_ID,
+ IDMA_UNIT_ID,
+ XOR_UNIT_ID,
+ SATA_UNIT_ID,
+ TDM_UNIT_ID,
+ UART_UNIT_ID,
+ CESA_UNIT_ID,
+ SPI_UNIT_ID,
+ AUDIO_UNIT_ID,
+ SDIO_UNIT_ID,
+ TS_UNIT_ID,
+ MAX_UNITS_ID
+
+}MV_UNIT_ID;
+
+#endif
+
+#endif /* __INCmvCtrlEnvSpech */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#include "ctrlEnv/sys/mvAhbToMbus.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+#undef MV_DEBUG
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+/* typedefs */
+
+
+/* CPU address remap registers offsets are inconsecutive. This struct */
+/* describes address remap register offsets */
+typedef struct _ahbToMbusRemapRegOffs
+{
+ MV_U32 lowRegOffs; /* Low 32-bit remap register offset */
+ MV_U32 highRegOffs; /* High 32 bit remap register offset */
+}AHB_TO_MBUS_REMAP_REG_OFFS;
+
+/* locals */
+static MV_STATUS ahbToMbusRemapRegOffsGet (MV_U32 winNum,
+ AHB_TO_MBUS_REMAP_REG_OFFS *pRemapRegs);
+
+/*******************************************************************************
+* mvAhbToMbusInit - Initialize Ahb To Mbus Address Map !
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_OK laways.
+*
+*******************************************************************************/
+MV_STATUS mvAhbToMbusInit(void)
+{
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvAhbToMbusWinSet - Set CPU-to-peripheral winNum address window
+*
+* DESCRIPTION:
+* This function sets
+* address window, also known as address decode window.
+* A new address decode window is set for specified winNum address window.
+* If address decode window parameter structure enables the window,
+* the routine will also enable the winNum window, allowing CPU to access
+* the winNum window.
+*
+* INPUT:
+* winNum - Windows number.
+* pAddrDecWin - CPU winNum window data structure.
+*
+* OUTPUT:
+* N/A
+*
+* RETURN:
+* MV_OK if CPU winNum window was set correctly, MV_ERROR in case of
+* address window overlapps with other active CPU winNum window or
+* trying to assign 36bit base address while CPU does not support that.
+* The function returns MV_NOT_SUPPORTED, if the winNum is unsupported.
+*
+*******************************************************************************/
+MV_STATUS mvAhbToMbusWinSet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin)
+{
+ MV_TARGET_ATTRIB targetAttribs;
+ MV_DEC_REGS decRegs;
+
+ /* Parameter checking */
+ if (winNum >= MAX_AHB_TO_MBUS_WINS)
+ {
+ mvOsPrintf("mvAhbToMbusWinSet: ERR. Invalid winNum %d\n", winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+
+ /* read base register*/
+ if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+ {
+ decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum));
+ }
+ else
+ {
+ decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_INTEREG_REG);
+ }
+
+ /* check if address is aligned to the size */
+ if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvAhbToMbusWinSet:Error setting AHB to MBUS window %d to "\
+ "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ winNum,
+ mvCtrlTargetNameGet(pAddrDecWin->target),
+ pAddrDecWin->addrWin.baseLow,
+ pAddrDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+ /* read control register*/
+ if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+ {
+ decRegs.sizeReg = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum));
+ }
+
+ if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+ {
+ mvOsPrintf("mvAhbToMbusWinSet:mvCtrlAddrDecToReg Failed\n");
+ return MV_ERROR;
+ }
+
+ /* enable\Disable */
+ if (MV_TRUE == pAddrDecWin->enable)
+ {
+ decRegs.sizeReg |= ATMWCR_WIN_ENABLE;
+ }
+ else
+ {
+ decRegs.sizeReg &= ~ATMWCR_WIN_ENABLE;
+ }
+
+ mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs);
+
+ /* set attributes */
+ decRegs.sizeReg &= ~ATMWCR_WIN_ATTR_MASK;
+ decRegs.sizeReg |= targetAttribs.attrib << ATMWCR_WIN_ATTR_OFFS;
+ /* set target ID */
+ decRegs.sizeReg &= ~ATMWCR_WIN_TARGET_MASK;
+ decRegs.sizeReg |= targetAttribs.targetId << ATMWCR_WIN_TARGET_OFFS;
+
+#if !defined(MV_RUN_FROM_FLASH)
+ /* To be on the safe side we disable the window before writing the */
+ /* new values. */
+ if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+ {
+ mvAhbToMbusWinEnable(winNum,MV_FALSE);
+ }
+#endif
+
+ /* 3) Write to address decode Base Address Register */
+ if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+ {
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum), decRegs.baseReg);
+ }
+ else
+ {
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_INTEREG_REG, decRegs.baseReg);
+ }
+
+
+ /* Internal register space have no size */
+ /* register. Do not perform size register assigment for those targets */
+ if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+ {
+ /* Write to address decode Size Register */
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), decRegs.sizeReg);
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvAhbToMbusWinGet - Get CPU-to-peripheral winNum address window
+*
+* DESCRIPTION:
+* Get the CPU peripheral winNum address window.
+*
+* INPUT:
+* winNum - Peripheral winNum enumerator
+*
+* OUTPUT:
+* pAddrDecWin - CPU winNum window information data structure.
+*
+* RETURN:
+* MV_OK if winNum exist, MV_ERROR otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvAhbToMbusWinGet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin)
+{
+ MV_DEC_REGS decRegs;
+ MV_TARGET_ATTRIB targetAttrib;
+
+
+ /* Parameter checking */
+ if (winNum >= MAX_AHB_TO_MBUS_WINS)
+ {
+ mvOsPrintf("mvAhbToMbusWinGet: ERR. Invalid winNum %d\n", winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+
+ /* Internal register space size have no size register*/
+ if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+ {
+ decRegs.sizeReg = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum));
+ }
+ else
+ {
+ decRegs.sizeReg = 0;
+ }
+
+
+ /* Read base and size */
+ if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+ {
+ decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum));
+ }
+ else
+ {
+ decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_INTEREG_REG);
+ }
+
+
+
+ if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin)))
+ {
+ mvOsPrintf("mvAhbToMbusWinGet: mvCtrlRegToAddrDec Failed \n");
+ return MV_ERROR;
+ }
+
+ if (winNum == MV_AHB_TO_MBUS_INTREG_WIN)
+ {
+ pAddrDecWin->addrWin.size = INTER_REGS_SIZE;
+ pAddrDecWin->target = INTER_REGS;
+ pAddrDecWin->enable = MV_TRUE;
+
+ return MV_OK;
+ }
+
+
+ if (decRegs.sizeReg & ATMWCR_WIN_ENABLE)
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrDecWin->enable = MV_FALSE;
+
+ }
+
+
+
+ if (-1 == pAddrDecWin->addrWin.size)
+ {
+ return MV_ERROR;
+ }
+
+ /* attrib and targetId */
+ targetAttrib.attrib = (decRegs.sizeReg & ATMWCR_WIN_ATTR_MASK) >>
+ ATMWCR_WIN_ATTR_OFFS;
+ targetAttrib.targetId = (decRegs.sizeReg & ATMWCR_WIN_TARGET_MASK) >>
+ ATMWCR_WIN_TARGET_OFFS;
+
+ pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvAhbToMbusWinTargetGet - Get Window number associated with target
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_U32 mvAhbToMbusWinTargetGet(MV_TARGET target)
+{
+ MV_AHB_TO_MBUS_DEC_WIN decWin;
+ MV_U32 winNum;
+
+ /* Check parameters */
+ if (target >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetGet: target %d is Illigal\n", target);
+ return 0xffffffff;
+ }
+
+ if (INTER_REGS == target)
+ {
+ return MV_AHB_TO_MBUS_INTREG_WIN;
+ }
+
+ for (winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS ; winNum++)
+ {
+ if (winNum == MV_AHB_TO_MBUS_INTREG_WIN)
+ continue;
+
+ if (mvAhbToMbusWinGet(winNum,&decWin) != MV_OK)
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetGet: mvAhbToMbusWinGet fail\n");
+ return 0xffffffff;
+
+ }
+
+ if (decWin.enable == MV_TRUE)
+ {
+ if (decWin.target == target)
+ {
+ return winNum;
+ }
+
+ }
+
+ }
+
+ return 0xFFFFFFFF;
+
+
+}
+
+/*******************************************************************************
+* mvAhbToMbusWinAvailGet - Get First Available window number.
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_U32 mvAhbToMbusWinAvailGet(MV_VOID)
+{
+ MV_AHB_TO_MBUS_DEC_WIN decWin;
+ MV_U32 winNum;
+
+ for (winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS ; winNum++)
+ {
+ if (winNum == MV_AHB_TO_MBUS_INTREG_WIN)
+ continue;
+
+ if (mvAhbToMbusWinGet(winNum,&decWin) != MV_OK)
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetGet: mvAhbToMbusWinGet fail\n");
+ return 0xffffffff;
+
+ }
+
+ if (decWin.enable == MV_FALSE)
+ {
+ return winNum;
+ }
+
+ }
+
+ return 0xFFFFFFFF;
+}
+
+
+/*******************************************************************************
+* mvAhbToMbusWinEnable - Enable/disable a CPU address decode window
+*
+* DESCRIPTION:
+* This function enable/disable a CPU address decode window.
+* if parameter 'enable' == MV_TRUE the routine will enable the
+* window, thus enabling CPU accesses (before enabling the window it is
+* tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+* winNum - Peripheral winNum enumerator.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* N/A
+*
+* RETURN:
+* MV_ERROR if protection window number was wrong, or the window
+* overlapps other winNum window.
+*
+*******************************************************************************/
+MV_STATUS mvAhbToMbusWinEnable(MV_U32 winNum, MV_BOOL enable)
+{
+
+ /* Parameter checking */
+ if (winNum >= MAX_AHB_TO_MBUS_WINS)
+ {
+ mvOsPrintf("mvAhbToMbusWinEnable: ERR. Invalid winNum %d\n", winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+ /* Internal registers bar can't be disable or enabled */
+ if (winNum == MV_AHB_TO_MBUS_INTREG_WIN)
+ {
+ return (enable ? MV_OK : MV_ERROR);
+ }
+
+ if (enable == MV_TRUE)
+ {
+ /* enable the window */
+ MV_REG_BIT_SET(AHB_TO_MBUS_WIN_CTRL_REG(winNum), ATMWCR_WIN_ENABLE);
+ }
+ else
+ { /* Disable address decode winNum window */
+ MV_REG_BIT_RESET(AHB_TO_MBUS_WIN_CTRL_REG(winNum), ATMWCR_WIN_ENABLE);
+ }
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvAhbToMbusWinRemap - Set CPU remap register for address windows.
+*
+* DESCRIPTION:
+* After a CPU address hits one of PCI address decode windows there is an
+* option to remap the address to a different one. For example, CPU
+* executes a read from PCI winNum window address 0x1200.0000. This
+* can be modified so the address on the PCI bus would be 0x1400.0000
+* Using the PCI address remap mechanism.
+*
+* INPUT:
+* winNum - Peripheral winNum enumerator. Must be a PCI winNum.
+* pAddrDecWin - CPU winNum window information data structure.
+* Note that caller has to fill in the base field only. The
+* size field is ignored.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if winNum is not a PCI one, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_U32 mvAhbToMbusWinRemap(MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 baseAddr;
+ AHB_TO_MBUS_REMAP_REG_OFFS remapRegOffs;
+
+ MV_U32 effectiveBaseAddress=0,
+ baseAddrValue=0,windowSizeValue=0;
+
+
+ /* Get registers offsets of given winNum */
+ if (MV_NO_SUCH == ahbToMbusRemapRegOffsGet(winNum, &remapRegOffs))
+ {
+ return 0xffffffff;
+ }
+
+ /* 1) Set address remap low */
+ baseAddr = pAddrWin->baseLow;
+
+ /* Check base address aligment */
+ /*
+ if (MV_IS_NOT_ALIGN(baseAddr, ATMWRLR_REMAP_LOW_ALIGNMENT))
+ {
+ mvOsPrintf("mvAhbToMbusPciRemap: Warning. Target base 0x%x unaligned\n",
+ baseAddr);
+ return MV_ERROR;
+ }
+ */
+
+ /* BaseLow[31:16] => base register [31:16] */
+ baseAddr = baseAddr & ATMWRLR_REMAP_LOW_MASK;
+
+ MV_REG_WRITE(remapRegOffs.lowRegOffs, baseAddr);
+
+ MV_REG_WRITE(remapRegOffs.highRegOffs, pAddrWin->baseHigh);
+
+
+ baseAddrValue = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum));
+ windowSizeValue = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum));
+
+ baseAddrValue &= ATMWBR_BASE_MASK;
+ windowSizeValue &=ATMWCR_WIN_SIZE_MASK;
+
+ /* Start calculating the effective Base Address */
+ effectiveBaseAddress = baseAddrValue ;
+
+ /* The effective base address will be combined from the chopped (if any)
+ remap value (according to the size value and remap mechanism) and the
+ window's base address */
+ effectiveBaseAddress |= (((windowSizeValue) | 0xffff) & pAddrWin->baseLow);
+ /* If the effectiveBaseAddress exceed the window boundaries return an
+ invalid value. */
+
+ if (effectiveBaseAddress > (baseAddrValue + (windowSizeValue | 0xffff)))
+ {
+ mvOsPrintf("mvAhbToMbusPciRemap: Error\n");
+ return 0xffffffff;
+ }
+
+ return effectiveBaseAddress;
+
+
+}
+/*******************************************************************************
+* mvAhbToMbusWinTargetSwap - Swap AhbToMbus windows between targets
+*
+* DESCRIPTION:
+*
+* INPUT:
+* target1 - CPU Interface target 1
+* target2 - CPU Interface target 2
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if targets are illigal, or if one of the targets is not
+* associated to a valid window .
+* MV_OK otherwise.
+*
+*******************************************************************************/
+
+
+MV_STATUS mvAhbToMbusWinTargetSwap(MV_TARGET target1,MV_TARGET target2)
+{
+ MV_U32 winNum1,winNum2;
+ MV_AHB_TO_MBUS_DEC_WIN winDec1,winDec2,winDecTemp;
+ AHB_TO_MBUS_REMAP_REG_OFFS remapRegs1,remapRegs2;
+ MV_U32 remapBaseLow1=0,remapBaseLow2=0;
+ MV_U32 remapBaseHigh1=0,remapBaseHigh2=0;
+
+
+ /* Check parameters */
+ if (target1 >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d is Illigal\n", target1);
+ return MV_ERROR;
+ }
+
+ if (target2 >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d is Illigal\n", target1);
+ return MV_ERROR;
+ }
+
+
+ /* get window associated with this target */
+ winNum1 = mvAhbToMbusWinTargetGet(target1);
+
+ if (winNum1 == 0xffffffff)
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d has illigal win %d\n",
+ target1,winNum1);
+ return MV_ERROR;
+
+ }
+
+ /* get window associated with this target */
+ winNum2 = mvAhbToMbusWinTargetGet(target2);
+
+ if (winNum2 == 0xffffffff)
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d has illigal win %d\n",
+ target2,winNum2);
+ return MV_ERROR;
+
+ }
+
+ /* now Get original values of both Windows */
+ if (MV_OK != mvAhbToMbusWinGet(winNum1,&winDec1))
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetSwap: mvAhbToMbusWinGet failed win %d\n",
+ winNum1);
+ return MV_ERROR;
+
+ }
+ if (MV_OK != mvAhbToMbusWinGet(winNum2,&winDec2))
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetSwap: mvAhbToMbusWinGet failed win %d\n",
+ winNum2);
+ return MV_ERROR;
+
+ }
+
+
+ /* disable both windows */
+ if (MV_OK != mvAhbToMbusWinEnable(winNum1,MV_FALSE))
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetSwap: failed to enable window %d\n",
+ winNum1);
+ return MV_ERROR;
+
+ }
+ if (MV_OK != mvAhbToMbusWinEnable(winNum2,MV_FALSE))
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetSwap: failed to enable windo %d\n",
+ winNum2);
+ return MV_ERROR;
+
+ }
+
+
+ /* now swap targets */
+
+ /* first save winDec2 values */
+ winDecTemp.addrWin.baseHigh = winDec2.addrWin.baseHigh;
+ winDecTemp.addrWin.baseLow = winDec2.addrWin.baseLow;
+ winDecTemp.addrWin.size = winDec2.addrWin.size;
+ winDecTemp.enable = winDec2.enable;
+ winDecTemp.target = winDec2.target;
+
+ /* winDec2 = winDec1 */
+ winDec2.addrWin.baseHigh = winDec1.addrWin.baseHigh;
+ winDec2.addrWin.baseLow = winDec1.addrWin.baseLow;
+ winDec2.addrWin.size = winDec1.addrWin.size;
+ winDec2.enable = winDec1.enable;
+ winDec2.target = winDec1.target;
+
+
+ /* winDec1 = winDecTemp */
+ winDec1.addrWin.baseHigh = winDecTemp.addrWin.baseHigh;
+ winDec1.addrWin.baseLow = winDecTemp.addrWin.baseLow;
+ winDec1.addrWin.size = winDecTemp.addrWin.size;
+ winDec1.enable = winDecTemp.enable;
+ winDec1.target = winDecTemp.target;
+
+
+ /* now set the new values */
+
+
+ mvAhbToMbusWinSet(winNum1,&winDec1);
+ mvAhbToMbusWinSet(winNum2,&winDec2);
+
+
+
+
+
+ /* now we will treat the remap windows if exist */
+
+
+ /* now check if one or both windows has a remap window
+ as well after the swap ! */
+
+ /* if a window had a remap value differnt than the base value
+ before the swap , then after the swap the remap value will be
+ equal to the base value unless both windows has a remap windows*/
+
+ /* first get old values */
+ if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum1,&remapRegs1))
+ {
+ remapBaseLow1 = MV_REG_READ(remapRegs1.lowRegOffs);
+ remapBaseHigh1 = MV_REG_READ(remapRegs1.highRegOffs);
+
+ }
+ if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2))
+ {
+ remapBaseLow2 = MV_REG_READ(remapRegs2.lowRegOffs);
+ remapBaseHigh2 = MV_REG_READ(remapRegs2.highRegOffs);
+
+
+ }
+
+ /* now do the swap */
+ if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum1,&remapRegs1))
+ {
+ if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2))
+ {
+ /* Two windows has a remap !!! so swap */
+
+ MV_REG_WRITE(remapRegs2.highRegOffs,remapBaseHigh1);
+ MV_REG_WRITE(remapRegs2.lowRegOffs,remapBaseLow1);
+
+ MV_REG_WRITE(remapRegs1.highRegOffs,remapBaseHigh2);
+ MV_REG_WRITE(remapRegs1.lowRegOffs,remapBaseLow2);
+
+
+
+ }
+ else
+ {
+ /* remap == base */
+ MV_REG_WRITE(remapRegs1.highRegOffs,winDec1.addrWin.baseHigh);
+ MV_REG_WRITE(remapRegs1.lowRegOffs,winDec1.addrWin.baseLow);
+
+ }
+
+ }
+ else if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2))
+ {
+ /* remap == base */
+ MV_REG_WRITE(remapRegs2.highRegOffs,winDec2.addrWin.baseHigh);
+ MV_REG_WRITE(remapRegs2.lowRegOffs,winDec2.addrWin.baseLow);
+
+ }
+
+
+
+ return MV_OK;
+
+
+}
+
+
+
+#if defined(MV_88F1181)
+
+/*******************************************************************************
+* mvAhbToMbusXbarCtrlSet - Set The CPU master Xbar arbitration.
+*
+* DESCRIPTION:
+* This function sets CPU Mbus Arbiter
+*
+* INPUT:
+* pPizzaArbArray - A priority Structure describing 16 "pizza slices". At
+* each clock cycle, the crossbar arbiter samples all
+* requests and gives the bus to the next agent according
+* to the "pizza".
+*
+* OUTPUT:
+* N/A
+*
+* RETURN:
+* MV_ERROR if paramers to function invalid.
+*
+*******************************************************************************/
+MV_STATUS mvMbusArbSet(MV_MBUS_ARB_TARGET *pPizzaArbArray)
+{
+ MV_U32 sliceNum;
+ MV_U32 xbarCtrl = 0;
+ MV_MBUS_ARB_TARGET xbarTarget;
+
+ /* 1) Set crossbar control low register */
+ for (sliceNum = 0; sliceNum < MRLR_SLICE_NUM; sliceNum++)
+ {
+ xbarTarget = pPizzaArbArray[sliceNum];
+
+ /* sliceNum parameter check */
+ if (xbarTarget > MAX_MBUS_ARB_TARGETS)
+ {
+ mvOsPrintf("mvAhbToMbusXbarCtrlSet: ERR. Can't set Target %d\n",
+ xbarTarget);
+ return MV_ERROR;
+ }
+ xbarCtrl |= (xbarTarget << MRLR_LOW_ARB_OFFS(sliceNum));
+ }
+ /* Write to crossbar control low register */
+ MV_REG_WRITE(MBUS_ARBITER_LOW_REG, xbarCtrl);
+
+ xbarCtrl = 0;
+
+ /* 2) Set crossbar control high register */
+ for (sliceNum = MRLR_SLICE_NUM;
+ sliceNum < MRLR_SLICE_NUM+MRHR_SLICE_NUM;
+ sliceNum++)
+ {
+
+ xbarTarget = pPizzaArbArray[sliceNum];
+
+ /* sliceNum parameter check */
+ if (xbarTarget > MAX_MBUS_ARB_TARGETS)
+ {
+ mvOsPrintf("mvAhbToMbusXbarCtrlSet: ERR. Can't set Target %d\n",
+ xbarTarget);
+ return MV_ERROR;
+ }
+ xbarCtrl |= (xbarTarget << MRHR_HIGH_ARB_OFFS(sliceNum));
+ }
+ /* Write to crossbar control high register */
+ MV_REG_WRITE(MBUS_ARBITER_HIGH_REG, xbarCtrl);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvMbusArbCtrlSet - Set MBus Arbiter control register
+*
+* DESCRIPTION:
+*
+* INPUT:
+* ctrl - pointer to MV_MBUS_ARB_CTRL register
+*
+* OUTPUT:
+* N/A
+*
+* RETURN:
+* MV_ERROR if paramers to function invalid.
+*
+*******************************************************************************/
+MV_STATUS mvMbusArbCtrlSet(MV_MBUS_ARB_CTRL *ctrl)
+{
+
+ if (ctrl->highPrio == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_ARM_TOP);
+ }
+ else
+ {
+ MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_ARM_TOP);
+ }
+
+ if (ctrl->fixedRoundRobin == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_TARGET_FIXED);
+ }
+ else
+ {
+ MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_TARGET_FIXED);
+ }
+
+ if (ctrl->starvEn == MV_FALSE)
+ {
+ MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_REQ_CTRL_EN);
+ }
+ else
+ {
+ MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_REQ_CTRL_EN);
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvMbusArbCtrlGet - Get MBus Arbiter control register
+*
+* DESCRIPTION:
+*
+* INPUT:
+* ctrl - pointer to MV_MBUS_ARB_CTRL register
+*
+* OUTPUT:
+* ctrl - pointer to MV_MBUS_ARB_CTRL register
+*
+* RETURN:
+* MV_ERROR if paramers to function invalid.
+*
+*******************************************************************************/
+MV_STATUS mvMbusArbCtrlGet(MV_MBUS_ARB_CTRL *ctrl)
+{
+
+ MV_U32 ctrlReg = MV_REG_READ(MBUS_ARBITER_CTRL_REG);
+
+ if (ctrlReg & MACR_ARB_ARM_TOP)
+ {
+ ctrl->highPrio = MV_TRUE;
+ }
+ else
+ {
+ ctrl->highPrio = MV_FALSE;
+ }
+
+ if (ctrlReg & MACR_ARB_TARGET_FIXED)
+ {
+ ctrl->fixedRoundRobin = MV_TRUE;
+ }
+ else
+ {
+ ctrl->fixedRoundRobin = MV_FALSE;
+ }
+
+ if (ctrlReg & MACR_ARB_REQ_CTRL_EN)
+ {
+ ctrl->starvEn = MV_TRUE;
+ }
+ else
+ {
+ ctrl->starvEn = MV_FALSE;
+ }
+
+
+ return MV_OK;
+}
+
+#endif /* #if defined(MV_88F1181) */
+
+
+
+/*******************************************************************************
+* ahbToMbusRemapRegOffsGet - Get CPU address remap register offsets
+*
+* DESCRIPTION:
+* CPU to PCI address remap registers offsets are inconsecutive.
+* This function returns PCI address remap registers offsets.
+*
+* INPUT:
+* winNum - Address decode window number. See MV_U32 enumerator.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if winNum is not a PCI one.
+*
+*******************************************************************************/
+static MV_STATUS ahbToMbusRemapRegOffsGet(MV_U32 winNum,
+ AHB_TO_MBUS_REMAP_REG_OFFS *pRemapRegs)
+{
+ switch (winNum)
+ {
+ case 0:
+ case 1:
+ pRemapRegs->lowRegOffs = AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum);
+ pRemapRegs->highRegOffs = AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum);
+ break;
+ case 2:
+ case 3:
+ if((mvCtrlModelGet() == MV_5281_DEV_ID) ||
+ (mvCtrlModelGet() == MV_1281_DEV_ID) ||
+ (mvCtrlModelGet() == MV_6183_DEV_ID) ||
+ (mvCtrlModelGet() == MV_6183L_DEV_ID))
+ {
+ pRemapRegs->lowRegOffs = AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum);
+ pRemapRegs->highRegOffs = AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum);
+ break;
+ }
+ else
+ {
+ pRemapRegs->lowRegOffs = 0;
+ pRemapRegs->highRegOffs = 0;
+
+ DB(mvOsPrintf("ahbToMbusRemapRegOffsGet: ERR. Invalid winNum %d\n",
+ winNum));
+ return MV_NO_SUCH;
+ }
+ default:
+ {
+ pRemapRegs->lowRegOffs = 0;
+ pRemapRegs->highRegOffs = 0;
+
+ DB(mvOsPrintf("ahbToMbusRemapRegOffsGet: ERR. Invalid winNum %d\n",
+ winNum));
+ return MV_NO_SUCH;
+ }
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvAhbToMbusAddDecShow - Print the AHB to MBus bridge address decode map.
+*
+* DESCRIPTION:
+* This function print the CPU address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvAhbToMbusAddDecShow(MV_VOID)
+{
+ MV_AHB_TO_MBUS_DEC_WIN win;
+ MV_U32 winNum;
+ mvOsOutput( "\n" );
+ mvOsOutput( "AHB To MBUS Bridge:\n" );
+ mvOsOutput( "-------------------\n" );
+
+ for( winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS; winNum++ )
+ {
+ memset( &win, 0, sizeof(MV_AHB_TO_MBUS_DEC_WIN) );
+
+ mvOsOutput( "win%d - ", winNum );
+
+ if( mvAhbToMbusWinGet( winNum, &win ) == MV_OK )
+ {
+ if( win.enable )
+ {
+ mvOsOutput( "%s base %08x, ",
+ mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+ mvOsOutput( "...." );
+ mvSizePrint( win.addrWin.size );
+
+ mvOsOutput( "\n" );
+
+ }
+ else
+ mvOsOutput( "disable\n" );
+ }
+ }
+
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvAhbToMbush
+#define __INCmvAhbToMbush
+
+/* includes */
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvAhbToMbusRegs.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+/* defines */
+
+#if defined(MV_88F1181)
+/* This enumerator defines the Marvell controller possible MBUS arbiter */
+/* target ports. It is used to define crossbar priority scheame (pizza) */
+typedef enum _mvMBusArbTargetId
+{
+ DRAM_MBUS_ARB_TARGET = 0, /* Port 0 -> DRAM interface */
+ TWSI_MBUS_ARB_TARGET = 1, /* Port 1 -> TWSI */
+ ARM_MBUS_ARB_TARGET = 2, /* Port 2 -> ARM */
+ PEX1_MBUS_ARB_TARGET = 3, /* Port 3 -> PCI Express 1 */
+ PEX0_MBUS_ARB_TARGET = 4, /* Port 4 -> PCI Express0 */
+ MAX_MBUS_ARB_TARGETS
+}MV_MBUS_ARB_TARGET;
+
+typedef struct _mvMBusArbCtrl
+{
+ MV_BOOL starvEn;
+ MV_BOOL highPrio;
+ MV_BOOL fixedRoundRobin;
+
+}MV_MBUS_ARB_CTRL;
+
+#endif /* #if defined(MV_88F1181) */
+
+typedef struct _mvAhbtoMbusDecWin
+{
+ MV_TARGET target;
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+}MV_AHB_TO_MBUS_DEC_WIN;
+
+/* mvAhbToMbus.h API list */
+
+MV_STATUS mvAhbToMbusInit(MV_VOID);
+MV_STATUS mvAhbToMbusWinSet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin);
+MV_STATUS mvAhbToMbusWinGet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin);
+MV_STATUS mvAhbToMbusWinEnable(MV_U32 winNum,MV_BOOL enable);
+MV_U32 mvAhbToMbusWinRemap(MV_U32 winNum, MV_ADDR_WIN *pAddrDecWin);
+MV_U32 mvAhbToMbusWinTargetGet(MV_TARGET target);
+MV_U32 mvAhbToMbusWinAvailGet(MV_VOID);
+MV_STATUS mvAhbToMbusWinTargetSwap(MV_TARGET target1,MV_TARGET target2);
+
+#if defined(MV_88F1181)
+
+MV_STATUS mvMbusArbSet(MV_MBUS_ARB_TARGET *pPizzaArbArray);
+MV_STATUS mvMbusArbCtrlSet(MV_MBUS_ARB_CTRL *ctrl);
+MV_STATUS mvMbusArbCtrlGet(MV_MBUS_ARB_CTRL *ctrl);
+
+#endif /* #if defined(MV_88F1181) */
+
+
+MV_VOID mvAhbToMbusAddDecShow(MV_VOID);
+
+
+#endif /* __INCmvAhbToMbush */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvAhbToMbusRegsh
+#define __INCmvAhbToMbusRegsh
+
+/******************************/
+/* ARM Address Map Registers */
+/******************************/
+
+#define MAX_AHB_TO_MBUS_WINS 9
+#define MV_AHB_TO_MBUS_INTREG_WIN 8
+
+
+#define AHB_TO_MBUS_WIN_CTRL_REG(winNum) (0x20000 + (winNum)*0x10)
+#define AHB_TO_MBUS_WIN_BASE_REG(winNum) (0x20004 + (winNum)*0x10)
+#define AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum) (0x20008 + (winNum)*0x10)
+#define AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum) (0x2000C + (winNum)*0x10)
+#define AHB_TO_MBUS_WIN_INTEREG_REG 0x20080
+
+/* Window Control Register */
+/* AHB_TO_MBUS_WIN_CTRL_REG (ATMWCR)*/
+#define ATMWCR_WIN_ENABLE BIT0 /* Window Enable */
+
+#define ATMWCR_WIN_TARGET_OFFS 4 /* The target interface associated
+ with this window*/
+#define ATMWCR_WIN_TARGET_MASK (0xf << ATMWCR_WIN_TARGET_OFFS)
+
+#define ATMWCR_WIN_ATTR_OFFS 8 /* The target interface attributes
+ Associated with this window */
+#define ATMWCR_WIN_ATTR_MASK (0xff << ATMWCR_WIN_ATTR_OFFS)
+
+
+/*
+Used with the Base register to set the address window size and location
+Must be programed from LSB to MSB as sequence of 1\92s followed
+by sequence of 0\92s. The number of 1\92s specifies the size of the window
+in 64 KB granularity (e.g. a value of 0x00FF specifies 256 = 16 MB).
+
+NOTE: A value of 0x0 specifies 64KB size.
+*/
+#define ATMWCR_WIN_SIZE_OFFS 16 /* Window Size */
+#define ATMWCR_WIN_SIZE_MASK (0xffff << ATMWCR_WIN_SIZE_OFFS)
+#define ATMWCR_WIN_SIZE_ALIGNMENT 0x10000
+
+/* Window Base Register */
+/* AHB_TO_MBUS_WIN_BASE_REG (ATMWBR) */
+
+/*
+Used with the size field to set the address window size and location.
+Corresponds to transaction address[31:16]
+*/
+#define ATMWBR_BASE_OFFS 16 /* Base Address */
+#define ATMWBR_BASE_MASK (0xffff << ATMWBR_BASE_OFFS)
+#define ATMWBR_BASE_ALIGNMENT 0x10000
+
+/* Window Remap Low Register */
+/* AHB_TO_MBUS_WIN_REMAP_LOW_REG (ATMWRLR) */
+
+/*
+Used with the size field to specifies address bits[31:0] to be driven to
+the target interface.:
+target_addr[31:16] = (addr[31:16] & size[15:0]) | (remap[31:16] & ~size[15:0])
+*/
+#define ATMWRLR_REMAP_LOW_OFFS 16 /* Remap Address */
+#define ATMWRLR_REMAP_LOW_MASK (0xffff << ATMWRLR_REMAP_LOW_OFFS)
+#define ATMWRLR_REMAP_LOW_ALIGNMENT 0x10000
+
+/* Window Remap High Register */
+/* AHB_TO_MBUS_WIN_REMAP_HIGH_REG (ATMWRHR) */
+
+/*
+Specifies address bits[63:32] to be driven to the target interface.
+target_addr[63:32] = (RemapHigh[31:0]
+*/
+#define ATMWRHR_REMAP_HIGH_OFFS 0 /* Remap Address */
+#define ATMWRHR_REMAP_HIGH_MASK (0xffffffff << ATMWRHR_REMAP_HIGH_OFFS)
+
+
+#endif /* __INCmvAhbToMbusRegsh */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/sys/mvAhbToMbusRegs.h"
+#include "cpu/mvCpu.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "mvSysHwConfig.h"
+#include "mvSysDram.h"
+
+/*#define MV_DEBUG*/
+/* defines */
+
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+/* locals */
+/* static functions */
+static MV_BOOL cpuTargetWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin);
+
+MV_TARGET * sampleAtResetTargetArray;
+MV_TARGET sampleAtResetTargetArrayP[] = BOOT_TARGETS_NAME_ARRAY;
+MV_TARGET sampleAtResetTargetArray6180P[] = BOOT_TARGETS_NAME_ARRAY_6180;
+/*******************************************************************************
+* mvCpuIfInit - Initialize Controller CPU interface
+*
+* DESCRIPTION:
+* This function initialize Controller CPU interface:
+* 1. Set CPU interface configuration registers.
+* 2. Set CPU master Pizza arbiter control according to static
+* configuration described in configuration file.
+* 3. Opens CPU address decode windows. DRAM windows are assumed to be
+* already set (auto detection).
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvCpuIfInit(MV_CPU_DEC_WIN *cpuAddrWinMap)
+{
+ MV_U32 regVal;
+ MV_TARGET target;
+ MV_ADDR_WIN addrWin;
+
+ if (cpuAddrWinMap == NULL)
+ {
+ DB(mvOsPrintf("mvCpuIfInit:ERR. cpuAddrWinMap == NULL\n"));
+ return MV_ERROR;
+ }
+
+ /*Initialize the boot target array according to device type*/
+ if(mvCtrlModelGet() == MV_6180_DEV_ID)
+ sampleAtResetTargetArray = sampleAtResetTargetArray6180P;
+ else
+ sampleAtResetTargetArray = sampleAtResetTargetArrayP;
+
+ /* Set ARM Configuration register */
+ regVal = MV_REG_READ(CPU_CONFIG_REG);
+ regVal &= ~CPU_CONFIG_DEFAULT_MASK;
+ regVal |= CPU_CONFIG_DEFAULT;
+ MV_REG_WRITE(CPU_CONFIG_REG,regVal);
+
+ /* First disable all CPU target windows */
+ for (target = 0; cpuAddrWinMap[target].enable != TBL_TERM; target++)
+ {
+ if ((MV_TARGET_IS_DRAM(target))||(target == INTER_REGS))
+ {
+ continue;
+ }
+
+#if defined(MV_MEM_OVER_PCI_WA) || defined(MV_UART_OVER_PCI_WA)
+ /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */
+ if (MV_TARGET_IS_PCI(target))
+ {
+ continue;
+ }
+#endif
+
+#if defined(MV_MEM_OVER_PEX_WA) || defined(MV_UART_OVER_PEX_WA)
+ /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */
+ if (MV_TARGET_IS_PEX(target))
+ {
+ continue;
+ }
+#endif
+#if defined(MV_RUN_FROM_FLASH)
+ /* Don't disable the boot device. */
+ if (target == DEV_BOOCS)
+ {
+ continue;
+ }
+#endif /* MV_RUN_FROM_FLASH */
+ mvCpuIfTargetWinEnable(MV_CHANGE_BOOT_CS(target),MV_FALSE);
+ }
+
+#if defined(MV_RUN_FROM_FLASH)
+ /* Resize the bootcs windows before other windows, because this */
+ /* window is enabled and will cause an overlap if not resized. */
+ target = DEV_BOOCS;
+
+ if (MV_OK != mvCpuIfTargetWinSet(target, &cpuAddrWinMap[target]))
+ {
+ DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinSet fail\n"));
+ return MV_ERROR;
+ }
+
+ addrWin.baseLow = cpuAddrWinMap[target].addrWin.baseLow;
+ addrWin.baseHigh = cpuAddrWinMap[target].addrWin.baseHigh;
+ if (0xffffffff == mvAhbToMbusWinRemap(cpuAddrWinMap[target].winNum ,&addrWin))
+ {
+ DB(mvOsPrintf("mvCpuIfInit:WARN. mvAhbToMbusWinRemap can't remap winNum=%d\n",
+ cpuAddrWinMap[target].winNum));
+ }
+
+#endif /* MV_RUN_FROM_FLASH */
+
+ /* Go through all targets in user table until table terminator */
+ for (target = 0; cpuAddrWinMap[target].enable != TBL_TERM; target++)
+ {
+
+#if defined(MV_RUN_FROM_FLASH)
+ if (target == DEV_BOOCS)
+ {
+ continue;
+ }
+#endif /* MV_RUN_FROM_FLASH */
+
+ /* if DRAM auto sizing is used do not initialized DRAM target windows, */
+ /* assuming this already has been done earlier. */
+#ifdef MV_DRAM_AUTO_SIZE
+ if (MV_TARGET_IS_DRAM(target))
+ {
+ continue;
+ }
+#endif
+
+#if defined(MV_MEM_OVER_PCI_WA) || defined(MV_UART_OVER_PCI_WA)
+ /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */
+ if (MV_TARGET_IS_PCI(target))
+ {
+ continue;
+ }
+#endif
+
+#if defined(MV_MEM_OVER_PEX_WA) || defined(MV_UART_OVER_PEX_WA)
+ /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */
+ if (MV_TARGET_IS_PEX(target))
+ {
+ continue;
+ }
+#endif
+ /* If the target attribute is the same as the boot device attribute */
+ /* then it's stays disable */
+ if (MV_TARGET_IS_AS_BOOT(target))
+ {
+ continue;
+ }
+
+ if((0 == cpuAddrWinMap[target].addrWin.size) ||
+ (DIS == cpuAddrWinMap[target].enable))
+
+ {
+ if (MV_OK != mvCpuIfTargetWinEnable(target, MV_FALSE))
+ {
+ DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinEnable fail\n"));
+ return MV_ERROR;
+ }
+
+ }
+ else
+ {
+ if (MV_OK != mvCpuIfTargetWinSet(target, &cpuAddrWinMap[target]))
+ {
+ DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinSet fail\n"));
+ return MV_ERROR;
+ }
+
+ addrWin.baseLow = cpuAddrWinMap[target].addrWin.baseLow;
+ addrWin.baseHigh = cpuAddrWinMap[target].addrWin.baseHigh;
+ if (0xffffffff == mvAhbToMbusWinRemap(cpuAddrWinMap[target].winNum ,&addrWin))
+ {
+ DB(mvOsPrintf("mvCpuIfInit:WARN. mvAhbToMbusWinRemap can't remap winNum=%d\n",
+ cpuAddrWinMap[target].winNum));
+ }
+
+
+ }
+ }
+
+ return MV_OK;
+
+
+}
+
+
+/*******************************************************************************
+* mvCpuIfTargetWinSet - Set CPU-to-peripheral target address window
+*
+* DESCRIPTION:
+* This function sets a peripheral target (e.g. SDRAM bank0, PCI0_MEM0)
+* address window, also known as address decode window.
+* A new address decode window is set for specified target address window.
+* If address decode window parameter structure enables the window,
+* the routine will also enable the target window, allowing CPU to access
+* the target window.
+*
+* INPUT:
+* target - Peripheral target enumerator.
+* pAddrDecWin - CPU target window data structure.
+*
+* OUTPUT:
+* N/A
+*
+* RETURN:
+* MV_OK if CPU target window was set correctly, MV_ERROR in case of
+* address window overlapps with other active CPU target window or
+* trying to assign 36bit base address while CPU does not support that.
+* The function returns MV_NOT_SUPPORTED, if the target is unsupported.
+*
+*******************************************************************************/
+MV_STATUS mvCpuIfTargetWinSet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin)
+{
+ MV_AHB_TO_MBUS_DEC_WIN decWin;
+ MV_U32 existingWinNum;
+ MV_DRAM_DEC_WIN addrDecWin;
+
+ target = MV_CHANGE_BOOT_CS(target);
+
+ /* Check parameters */
+ if (target >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvCpuIfTargetWinSet: target %d is Illigal\n", target);
+ return MV_ERROR;
+ }
+
+ /* 2) Check if the requested window overlaps with current windows */
+ if (MV_TRUE == cpuTargetWinOverlap(target, &pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("mvCpuIfTargetWinSet: ERR. Target %d overlap\n", target);
+ return MV_BAD_PARAM;
+ }
+
+ if (MV_TARGET_IS_DRAM(target))
+ {
+ /* copy relevant data to MV_DRAM_DEC_WIN structure */
+ addrDecWin.addrWin.baseHigh = pAddrDecWin->addrWin.baseHigh;
+ addrDecWin.addrWin.baseLow = pAddrDecWin->addrWin.baseLow;
+ addrDecWin.addrWin.size = pAddrDecWin->addrWin.size;
+ addrDecWin.enable = pAddrDecWin->enable;
+
+
+ if (mvDramIfWinSet(target,&addrDecWin) != MV_OK);
+ {
+ mvOsPrintf("mvCpuIfTargetWinSet: mvDramIfWinSet Failed\n");
+ return MV_ERROR;
+ }
+
+ }
+ else
+ {
+ /* copy relevant data to MV_AHB_TO_MBUS_DEC_WIN structure */
+ decWin.addrWin.baseLow = pAddrDecWin->addrWin.baseLow;
+ decWin.addrWin.baseHigh = pAddrDecWin->addrWin.baseHigh;
+ decWin.addrWin.size = pAddrDecWin->addrWin.size;
+ decWin.enable = pAddrDecWin->enable;
+ decWin.target = target;
+
+ existingWinNum = mvAhbToMbusWinTargetGet(target);
+
+ /* check if there is already another Window configured
+ for this target */
+ if ((existingWinNum < MAX_AHB_TO_MBUS_WINS )&&
+ (existingWinNum != pAddrDecWin->winNum))
+ {
+ /* if we want to enable the new winow number
+ passed by the user , then the old one should
+ be disabled */
+ if (MV_TRUE == pAddrDecWin->enable)
+ {
+ /* be sure it is disabled */
+ mvAhbToMbusWinEnable(existingWinNum , MV_FALSE);
+ }
+ }
+
+ if (mvAhbToMbusWinSet(pAddrDecWin->winNum,&decWin) != MV_OK)
+ {
+ mvOsPrintf("mvCpuIfTargetWinSet: mvAhbToMbusWinSet Failed\n");
+ return MV_ERROR;
+ }
+
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCpuIfTargetWinGet - Get CPU-to-peripheral target address window
+*
+* DESCRIPTION:
+* Get the CPU peripheral target address window.
+*
+* INPUT:
+* target - Peripheral target enumerator
+*
+* OUTPUT:
+* pAddrDecWin - CPU target window information data structure.
+*
+* RETURN:
+* MV_OK if target exist, MV_ERROR otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvCpuIfTargetWinGet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin)
+{
+
+ MV_U32 winNum=0xffffffff;
+ MV_AHB_TO_MBUS_DEC_WIN decWin;
+ MV_DRAM_DEC_WIN addrDecWin;
+
+ target = MV_CHANGE_BOOT_CS(target);
+
+ /* Check parameters */
+ if (target >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvCpuIfTargetWinGet: target %d is Illigal\n", target);
+ return MV_ERROR;
+ }
+
+ if (MV_TARGET_IS_DRAM(target))
+ {
+ if (mvDramIfWinGet(target,&addrDecWin) != MV_OK)
+ {
+ mvOsPrintf("mvCpuIfTargetWinGet: Failed to get window target %d\n",
+ target);
+ return MV_ERROR;
+ }
+
+ /* copy relevant data to MV_CPU_DEC_WIN structure */
+ pAddrDecWin->addrWin.baseLow = addrDecWin.addrWin.baseLow;
+ pAddrDecWin->addrWin.baseHigh = addrDecWin.addrWin.baseHigh;
+ pAddrDecWin->addrWin.size = addrDecWin.addrWin.size;
+ pAddrDecWin->enable = addrDecWin.enable;
+ pAddrDecWin->winNum = 0xffffffff;
+
+ }
+ else
+ {
+ /* get the Window number associated with this target */
+
+ winNum = mvAhbToMbusWinTargetGet(target);
+ if (winNum >= MAX_AHB_TO_MBUS_WINS)
+ {
+ return MV_NO_SUCH;
+
+ }
+
+ if (mvAhbToMbusWinGet(winNum , &decWin) != MV_OK)
+ {
+ mvOsPrintf("%s: mvAhbToMbusWinGet Failed at winNum = %d\n",
+ __FUNCTION__, winNum);
+ return MV_ERROR;
+
+ }
+
+ /* copy relevant data to MV_CPU_DEC_WIN structure */
+ pAddrDecWin->addrWin.baseLow = decWin.addrWin.baseLow;
+ pAddrDecWin->addrWin.baseHigh = decWin.addrWin.baseHigh;
+ pAddrDecWin->addrWin.size = decWin.addrWin.size;
+ pAddrDecWin->enable = decWin.enable;
+ pAddrDecWin->winNum = winNum;
+
+ }
+
+
+
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvCpuIfTargetWinEnable - Enable/disable a CPU address decode window
+*
+* DESCRIPTION:
+* This function enable/disable a CPU address decode window.
+* if parameter 'enable' == MV_TRUE the routine will enable the
+* window, thus enabling CPU accesses (before enabling the window it is
+* tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+* target - Peripheral target enumerator.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* N/A
+*
+* RETURN:
+* MV_ERROR if protection window number was wrong, or the window
+* overlapps other target window.
+*
+*******************************************************************************/
+MV_STATUS mvCpuIfTargetWinEnable(MV_TARGET target,MV_BOOL enable)
+{
+ MV_U32 winNum, temp;
+ MV_CPU_DEC_WIN addrDecWin;
+
+ target = MV_CHANGE_BOOT_CS(target);
+
+ /* Check parameters */
+ if (target >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvCpuIfTargetWinEnable: target %d is Illigal\n", target);
+ return MV_ERROR;
+ }
+
+ /* get the window and check if it exist */
+ temp = mvCpuIfTargetWinGet(target, &addrDecWin);
+ if (MV_NO_SUCH == temp)
+ {
+ return (enable? MV_ERROR: MV_OK);
+ }
+ else if( MV_OK != temp)
+ {
+ mvOsPrintf("%s: ERR. Getting target %d failed.\n",__FUNCTION__, target);
+ return MV_ERROR;
+ }
+
+
+ /* check overlap */
+
+ if (MV_TRUE == enable)
+ {
+ if (MV_TRUE == cpuTargetWinOverlap(target, &addrDecWin.addrWin))
+ {
+ DB(mvOsPrintf("%s: ERR. Target %d overlap\n",__FUNCTION__, target));
+ return MV_ERROR;
+ }
+
+ }
+
+
+ if (MV_TARGET_IS_DRAM(target))
+ {
+ if (mvDramIfWinEnable(target , enable) != MV_OK)
+ {
+ mvOsPrintf("mvCpuIfTargetWinGet: mvDramIfWinEnable Failed at \n");
+ return MV_ERROR;
+
+ }
+
+ }
+ else
+ {
+ /* get the Window number associated with this target */
+
+ winNum = mvAhbToMbusWinTargetGet(target);
+
+ if (winNum >= MAX_AHB_TO_MBUS_WINS)
+ {
+ return (enable? MV_ERROR: MV_OK);
+ }
+
+ if (mvAhbToMbusWinEnable(winNum , enable) != MV_OK)
+ {
+ mvOsPrintf("mvCpuIfTargetWinGet: Failed to enable window = %d\n",
+ winNum);
+ return MV_ERROR;
+
+ }
+
+ }
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvCpuIfTargetWinSizeGet - Get CPU target address window size
+*
+* DESCRIPTION:
+* Get the size of CPU-to-peripheral target window.
+*
+* INPUT:
+* target - Peripheral target enumerator
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit size. Function also returns '0' if window is closed.
+* Function returns 0xFFFFFFFF in case of an error.
+*
+*******************************************************************************/
+MV_U32 mvCpuIfTargetWinSizeGet(MV_TARGET target)
+{
+ MV_CPU_DEC_WIN addrDecWin;
+
+ target = MV_CHANGE_BOOT_CS(target);
+
+ /* Check parameters */
+ if (target >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvCpuIfTargetWinSizeGet: target %d is Illigal\n", target);
+ return 0;
+ }
+
+ /* Get the winNum window */
+ if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin))
+ {
+ mvOsPrintf("mvCpuIfTargetWinSizeGet:ERR. Getting target %d failed.\n",
+ target);
+ return 0;
+ }
+
+ /* Check if window is enabled */
+ if (addrDecWin.enable == MV_TRUE)
+ {
+ return (addrDecWin.addrWin.size);
+ }
+ else
+ {
+ return 0; /* Window disabled. return 0 */
+ }
+}
+
+/*******************************************************************************
+* mvCpuIfTargetWinBaseLowGet - Get CPU target address window base low
+*
+* DESCRIPTION:
+* CPU-to-peripheral target address window base is constructed of
+* two parts: Low and high.
+* This function gets the CPU peripheral target low base address.
+*
+* INPUT:
+* target - Peripheral target enumerator
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit low base address.
+*
+*******************************************************************************/
+MV_U32 mvCpuIfTargetWinBaseLowGet(MV_TARGET target)
+{
+ MV_CPU_DEC_WIN addrDecWin;
+
+ target = MV_CHANGE_BOOT_CS(target);
+
+ /* Check parameters */
+ if (target >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvCpuIfTargetWinBaseLowGet: target %d is Illigal\n", target);
+ return 0xffffffff;
+ }
+
+ /* Get the target window */
+ if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin))
+ {
+ mvOsPrintf("mvCpuIfTargetWinBaseLowGet:ERR. Getting target %d failed.\n",
+ target);
+ return 0xffffffff;
+ }
+
+ if (MV_FALSE == addrDecWin.enable)
+ {
+ return 0xffffffff;
+ }
+ return (addrDecWin.addrWin.baseLow);
+}
+
+/*******************************************************************************
+* mvCpuIfTargetWinBaseHighGet - Get CPU target address window base high
+*
+* DESCRIPTION:
+* CPU-to-peripheral target address window base is constructed of
+* two parts: Low and high.
+* This function gets the CPU peripheral target high base address.
+*
+* INPUT:
+* target - Peripheral target enumerator
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit high base address.
+*
+*******************************************************************************/
+MV_U32 mvCpuIfTargetWinBaseHighGet(MV_TARGET target)
+{
+ MV_CPU_DEC_WIN addrDecWin;
+
+ target = MV_CHANGE_BOOT_CS(target);
+
+ /* Check parameters */
+ if (target >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvCpuIfTargetWinBaseLowGet: target %d is Illigal\n", target);
+ return 0xffffffff;
+ }
+
+ /* Get the target window */
+ if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin))
+ {
+ mvOsPrintf("mvCpuIfTargetWinBaseHighGet:ERR. Getting target %d failed.\n",
+ target);
+ return 0xffffffff;
+ }
+
+ if (MV_FALSE == addrDecWin.enable)
+ {
+ return 0;
+ }
+
+ return (addrDecWin.addrWin.baseHigh);
+}
+
+#if defined(MV_INCLUDE_PEX)
+/*******************************************************************************
+* mvCpuIfPexRemap - Set CPU remap register for address windows.
+*
+* DESCRIPTION:
+*
+* INPUT:
+* pexTarget - Peripheral target enumerator. Must be a PEX target.
+* pAddrDecWin - CPU target window information data structure.
+* Note that caller has to fill in the base field only. The
+* size field is ignored.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if target is not a PEX one, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_U32 mvCpuIfPexRemap(MV_TARGET pexTarget, MV_ADDR_WIN *pAddrDecWin)
+{
+ MV_U32 winNum;
+
+ /* Check parameters */
+
+ if (mvCtrlPexMaxIfGet() > 1)
+ {
+ if ((!MV_TARGET_IS_PEX1(pexTarget))&&(!MV_TARGET_IS_PEX0(pexTarget)))
+ {
+ mvOsPrintf("mvCpuIfPexRemap: target %d is Illigal\n",pexTarget);
+ return 0xffffffff;
+ }
+
+ }
+ else
+ {
+ if (!MV_TARGET_IS_PEX0(pexTarget))
+ {
+ mvOsPrintf("mvCpuIfPexRemap: target %d is Illigal\n",pexTarget);
+ return 0xffffffff;
+ }
+
+ }
+
+ /* get the Window number associated with this target */
+ winNum = mvAhbToMbusWinTargetGet(pexTarget);
+
+ if (winNum >= MAX_AHB_TO_MBUS_WINS)
+ {
+ mvOsPrintf("mvCpuIfPexRemap: mvAhbToMbusWinTargetGet Failed\n");
+ return 0xffffffff;
+
+ }
+
+ return mvAhbToMbusWinRemap(winNum , pAddrDecWin);
+}
+
+#endif
+
+#if defined(MV_INCLUDE_PCI)
+/*******************************************************************************
+* mvCpuIfPciRemap - Set CPU remap register for address windows.
+*
+* DESCRIPTION:
+*
+* INPUT:
+* pciTarget - Peripheral target enumerator. Must be a PCI target.
+* pAddrDecWin - CPU target window information data structure.
+* Note that caller has to fill in the base field only. The
+* size field is ignored.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if target is not a PCI one, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_U32 mvCpuIfPciRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin)
+{
+ MV_U32 winNum;
+
+ /* Check parameters */
+ if (!MV_TARGET_IS_PCI(pciTarget))
+ {
+ mvOsPrintf("mvCpuIfPciRemap: target %d is Illigal\n",pciTarget);
+ return 0xffffffff;
+ }
+
+ /* get the Window number associated with this target */
+ winNum = mvAhbToMbusWinTargetGet(pciTarget);
+
+ if (winNum >= MAX_AHB_TO_MBUS_WINS)
+ {
+ mvOsPrintf("mvCpuIfPciRemap: mvAhbToMbusWinTargetGet Failed\n");
+ return 0xffffffff;
+
+ }
+
+ return mvAhbToMbusWinRemap(winNum , pAddrDecWin);
+}
+#endif /* MV_INCLUDE_PCI */
+
+
+/*******************************************************************************
+* mvCpuIfPciIfRemap - Set CPU remap register for address windows.
+*
+* DESCRIPTION:
+*
+* INPUT:
+* pciTarget - Peripheral target enumerator. Must be a PCI target.
+* pAddrDecWin - CPU target window information data structure.
+* Note that caller has to fill in the base field only. The
+* size field is ignored.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if target is not a PCI one, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_U32 mvCpuIfPciIfRemap(MV_TARGET pciIfTarget, MV_ADDR_WIN *pAddrDecWin)
+{
+#if defined(MV_INCLUDE_PEX)
+ if (MV_TARGET_IS_PEX(pciIfTarget))
+ {
+ return mvCpuIfPexRemap(pciIfTarget,pAddrDecWin);
+ }
+#endif
+#if defined(MV_INCLUDE_PCI)
+
+ if (MV_TARGET_IS_PCI(pciIfTarget))
+ {
+ return mvCpuIfPciRemap(pciIfTarget,pAddrDecWin);
+ }
+#endif
+ return 0;
+}
+
+
+
+/*******************************************************************************
+* mvCpuIfTargetOfBaseAddressGet - Get the target according to base address
+*
+* DESCRIPTION:
+*
+* INPUT:
+* baseAddress - base address to be checked
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* the target number that baseAddress belongs to or MAX_TARGETS is not
+* found
+*
+*******************************************************************************/
+
+MV_TARGET mvCpuIfTargetOfBaseAddressGet(MV_U32 baseAddress)
+{
+ MV_CPU_DEC_WIN win;
+ MV_U32 target;
+
+ for( target = 0; target < MAX_TARGETS; target++ )
+ {
+ if( mvCpuIfTargetWinGet( target, &win ) == MV_OK )
+ {
+ if( win.enable )
+ {
+ if ((baseAddress >= win.addrWin.baseLow) &&
+ (baseAddress < win.addrWin.baseLow + win.addrWin.size)) break;
+ }
+ }
+ else return MAX_TARGETS;
+
+ }
+
+ return target;
+}
+/*******************************************************************************
+* cpuTargetWinOverlap - Detect CPU address decode windows overlapping
+*
+* DESCRIPTION:
+* An unpredicted behaviur is expected in case CPU address decode
+* windows overlapps.
+* This function detects CPU address decode windows overlapping of a
+* specified target. The function does not check the target itself for
+* overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+* target - Peripheral target enumerator.
+* pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlaps current address
+* decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL cpuTargetWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 targetNum;
+ MV_CPU_DEC_WIN addrDecWin;
+ MV_STATUS status;
+
+
+ for(targetNum = 0; targetNum < MAX_TARGETS; targetNum++)
+ {
+#if defined(MV_RUN_FROM_FLASH)
+ if(MV_TARGET_IS_AS_BOOT(target))
+ {
+ if (MV_CHANGE_BOOT_CS(targetNum) == target)
+ continue;
+ }
+#endif /* MV_RUN_FROM_FLASH */
+
+ /* don't check our target or illegal targets */
+ if (targetNum == target)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ status = mvCpuIfTargetWinGet(targetNum, &addrDecWin);
+ if(MV_NO_SUCH == status)
+ {
+ continue;
+ }
+ if(MV_OK != status)
+ {
+ DB(mvOsPrintf("cpuTargetWinOverlap: ERR. TargetWinGet failed\n"));
+ return MV_TRUE;
+ }
+
+ /* Do not check disabled windows */
+ if (MV_FALSE == addrDecWin.enable)
+ {
+ continue;
+ }
+
+ if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin))
+ {
+ DB(mvOsPrintf(
+ "cpuTargetWinOverlap: Required target %d overlap current %d\n",
+ target, targetNum));
+ return MV_TRUE;
+ }
+ }
+
+ return MV_FALSE;
+
+}
+
+/*******************************************************************************
+* mvCpuIfAddDecShow - Print the CPU address decode map.
+*
+* DESCRIPTION:
+* This function print the CPU address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvCpuIfAddDecShow(MV_VOID)
+{
+ MV_CPU_DEC_WIN win;
+ MV_U32 target;
+ mvOsOutput( "\n" );
+ mvOsOutput( "CPU Interface\n" );
+ mvOsOutput( "-------------\n" );
+
+ for( target = 0; target < MAX_TARGETS; target++ )
+ {
+
+ memset( &win, 0, sizeof(MV_CPU_DEC_WIN) );
+
+ mvOsOutput( "%s ",mvCtrlTargetNameGet(target));
+ mvOsOutput( "...." );
+
+ if( mvCpuIfTargetWinGet( target, &win ) == MV_OK )
+ {
+ if( win.enable )
+ {
+ mvOsOutput( "base %08x, ", win.addrWin.baseLow );
+ mvSizePrint( win.addrWin.size );
+ mvOsOutput( "\n" );
+
+ }
+ else
+ mvOsOutput( "disable\n" );
+ }
+ else if( mvCpuIfTargetWinGet( target, &win ) == MV_NO_SUCH )
+ {
+ mvOsOutput( "no such\n" );
+ }
+ }
+}
+
+/*******************************************************************************
+* mvCpuIfEnablePex - Enable PCI Express.
+*
+* DESCRIPTION:
+* This function Enable PCI Express.
+*
+* INPUT:
+* pexIf - PEX interface number.
+* pexType - MV_PEX_ROOT_COMPLEX - root complex device
+* MV_PEX_END_POINT - end point device
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+#if defined(MV_INCLUDE_PEX)
+MV_VOID mvCpuIfEnablePex(MV_U32 pexIf, MV_PEX_TYPE pexType)
+{
+ /* Set pex mode incase S@R not exist */
+ if( pexType == MV_PEX_END_POINT)
+ {
+ MV_REG_BIT_RESET(PEX_CTRL_REG(pexIf),PXCR_DEV_TYPE_CTRL_MASK);
+ /* Change pex mode in capability reg */
+ MV_REG_BIT_RESET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_CAPABILITY_REG), BIT22);
+ MV_REG_BIT_SET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_CAPABILITY_REG), BIT20);
+
+ }
+ else
+ {
+ MV_REG_BIT_SET(PEX_CTRL_REG(pexIf),PXCR_DEV_TYPE_CTRL_MASK);
+ }
+
+ /* CPU config register Pex enable */
+ MV_REG_BIT_SET(CPU_CTRL_STAT_REG,CCSR_PCI_ACCESS_MASK);
+}
+#endif
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCpuIfh
+#define __INCmvCpuIfh
+
+/* includes */
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIfRegs.h"
+#include "ctrlEnv/sys/mvAhbToMbus.h"
+#include "ddr2/mvDramIf.h"
+#include "ctrlEnv/sys/mvSysDram.h"
+#if defined(MV_INCLUDE_PEX)
+#include "pex/mvPex.h"
+#endif
+
+/* defines */
+
+/* typedefs */
+/* This structure describes CPU interface address decode window */
+typedef struct _mvCpuIfDecWin
+{
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_U32 winNum; /* Window Number in the AHB To Mbus bridge */
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+}MV_CPU_DEC_WIN;
+
+
+
+/* mvCpuIfLib.h API list */
+
+/* mvCpuIfLib.h API list */
+
+MV_STATUS mvCpuIfInit(MV_CPU_DEC_WIN *cpuAddrWinMap);
+MV_STATUS mvCpuIfTargetWinSet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin);
+MV_STATUS mvCpuIfTargetWinGet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin);
+MV_STATUS mvCpuIfTargetWinEnable(MV_TARGET target,MV_BOOL enable);
+MV_U32 mvCpuIfTargetWinSizeGet(MV_TARGET target);
+MV_U32 mvCpuIfTargetWinBaseLowGet(MV_TARGET target);
+MV_U32 mvCpuIfTargetWinBaseHighGet(MV_TARGET target);
+MV_TARGET mvCpuIfTargetOfBaseAddressGet(MV_U32 baseAddress);
+#if defined(MV_INCLUDE_PEX)
+MV_U32 mvCpuIfPexRemap(MV_TARGET pexTarget, MV_ADDR_WIN *pAddrDecWin);
+MV_VOID mvCpuIfEnablePex(MV_U32 pexIf, MV_PEX_TYPE pexType);
+#endif
+#if defined(MV_INCLUDE_PCI)
+MV_U32 mvCpuIfPciRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin);
+#endif
+MV_U32 mvCpuIfPciIfRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin);
+
+MV_VOID mvCpuIfAddDecShow(MV_VOID);
+
+#if defined(MV88F6281)
+MV_STATUS mvCpuIfBridgeReorderWAInit(void);
+#endif
+
+#endif /* __INCmvCpuIfh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCpuIfRegsh
+#define __INCmvCpuIfRegsh
+
+/****************************************/
+/* ARM Control and Status Registers Map */
+/****************************************/
+
+#define CPU_CONFIG_REG 0x20100
+#define CPU_CTRL_STAT_REG 0x20104
+#define CPU_RSTOUTN_MASK_REG 0x20108
+#define CPU_SYS_SOFT_RST_REG 0x2010C
+#define CPU_AHB_MBUS_CAUSE_INT_REG 0x20110
+#define CPU_AHB_MBUS_MASK_INT_REG 0x20114
+#define CPU_FTDLL_CONFIG_REG 0x20120
+#define CPU_L2_CONFIG_REG 0x20128
+
+
+
+/* ARM Configuration register */
+/* CPU_CONFIG_REG (CCR) */
+
+
+/* Reset vector location */
+#define CCR_VEC_INIT_LOC_OFFS 1
+#define CCR_VEC_INIT_LOC_MASK BIT1
+/* reset at 0x00000000 */
+#define CCR_VEC_INIT_LOC_0000 (0 << CCR_VEC_INIT_LOC_OFFS)
+/* reset at 0xFFFF0000 */
+#define CCR_VEC_INIT_LOC_FF00 (1 << CCR_VEC_INIT_LOC_OFFS)
+
+
+#define CCR_AHB_ERROR_PROP_OFFS 2
+#define CCR_AHB_ERROR_PROP_MASK BIT2
+/* Erros are not propogated to AHB */
+#define CCR_AHB_ERROR_PROP_NO_INDICATE (0 << CCR_AHB_ERROR_PROP_OFFS)
+/* Erros are propogated to AHB */
+#define CCR_AHB_ERROR_PROP_INDICATE (1 << CCR_AHB_ERROR_PROP_OFFS)
+
+
+#define CCR_ENDIAN_INIT_OFFS 3
+#define CCR_ENDIAN_INIT_MASK BIT3
+#define CCR_ENDIAN_INIT_LITTLE (0 << CCR_ENDIAN_INIT_OFFS)
+#define CCR_ENDIAN_INIT_BIG (1 << CCR_ENDIAN_INIT_OFFS)
+
+
+#define CCR_INCR_EN_OFFS 4
+#define CCR_INCR_EN_MASK BIT4
+#define CCR_INCR_EN BIT4
+
+
+#define CCR_NCB_BLOCKING_OFFS 5
+#define CCR_NCB_BLOCKING_MASK (1 << CCR_NCB_BLOCKING_OFFS)
+#define CCR_NCB_BLOCKING_NON (0 << CCR_NCB_BLOCKING_OFFS)
+#define CCR_NCB_BLOCKING_EN (1 << CCR_NCB_BLOCKING_OFFS)
+
+#define CCR_CPU_2_MBUSL_TICK_DRV_OFFS 8
+#define CCR_CPU_2_MBUSL_TICK_DRV_MASK (0xF << CCR_CPU_2_MBUSL_TICK_DRV_OFFS)
+#define CCR_CPU_2_MBUSL_TICK_SMPL_OFFS 12
+#define CCR_CPU_2_MBUSL_TICK_SMPL_MASK (0xF << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS)
+#define CCR_ICACH_PREF_BUF_ENABLE BIT16
+#define CCR_DCACH_PREF_BUF_ENABLE BIT17
+
+/* Ratio options for CPU to DDR for 6281/6192/6190 */
+#define CPU_2_DDR_CLK_1x3 4
+#define CPU_2_DDR_CLK_1x4 6
+
+/* Ratio options for CPU to DDR for 6281 only */
+#define CPU_2_DDR_CLK_2x9 7
+#define CPU_2_DDR_CLK_1x5 8
+#define CPU_2_DDR_CLK_1x6 9
+
+/* Ratio options for CPU to DDR for 6180 only */
+#define CPU_2_DDR_CLK_1x3_1 0x5
+#define CPU_2_DDR_CLK_1x4_1 0x6
+
+/* Default values for CPU to Mbus-L DDR Interface Tick Driver and */
+/* CPU to Mbus-L Tick Sample fields in CPU config register */
+
+#define TICK_DRV_1x1 0
+#define TICK_DRV_1x2 0
+#define TICK_DRV_1x3 1
+#define TICK_DRV_1x4 2
+#define TICK_SMPL_1x1 0
+#define TICK_SMPL_1x2 1
+#define TICK_SMPL_1x3 0
+#define TICK_SMPL_1x4 0
+
+#define CPU_2_MBUSL_DDR_CLK_1x2 \
+ ((TICK_DRV_1x2 << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | \
+ (TICK_SMPL_1x2 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS))
+#define CPU_2_MBUSL_DDR_CLK_1x3 \
+ ((TICK_DRV_1x3 << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | \
+ (TICK_SMPL_1x3 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS))
+#define CPU_2_MBUSL_DDR_CLK_1x4 \
+ ((TICK_DRV_1x4 << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | \
+ (TICK_SMPL_1x4 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS))
+
+/* ARM Control and Status register */
+/* CPU_CTRL_STAT_REG (CCSR) */
+
+
+/*
+This is used to block PCI express\PCI from access Socrates/Feroceon GP
+while ARM boot is still in progress
+*/
+
+#define CCSR_PCI_ACCESS_OFFS 0
+#define CCSR_PCI_ACCESS_MASK BIT0
+#define CCSR_PCI_ACCESS_ENABLE (0 << CCSR_PCI_ACCESS_OFFS)
+#define CCSR_PCI_ACCESS_DISBALE (1 << CCSR_PCI_ACCESS_OFFS)
+
+#define CCSR_ARM_RESET BIT1
+#define CCSR_SELF_INT BIT2
+#define CCSR_BIG_ENDIAN BIT15
+
+
+/* RSTOUTn Mask Register */
+/* CPU_RSTOUTN_MASK_REG (CRMR) */
+
+#define CRMR_PEX_RST_OUT_OFFS 0
+#define CRMR_PEX_RST_OUT_MASK BIT0
+#define CRMR_PEX_RST_OUT_ENABLE (1 << CRMR_PEX_RST_OUT_OFFS)
+#define CRMR_PEX_RST_OUT_DISABLE (0 << CRMR_PEX_RST_OUT_OFFS)
+
+#define CRMR_WD_RST_OUT_OFFS 1
+#define CRMR_WD_RST_OUT_MASK BIT1
+#define CRMR_WD_RST_OUT_ENABLE (1 << CRMR_WD_RST_OUT_OFFS)
+#define CRMR_WD_RST_OUT_DISBALE (0 << CRMR_WD_RST_OUT_OFFS)
+
+#define CRMR_SOFT_RST_OUT_OFFS 2
+#define CRMR_SOFT_RST_OUT_MASK BIT2
+#define CRMR_SOFT_RST_OUT_ENABLE (1 << CRMR_SOFT_RST_OUT_OFFS)
+#define CRMR_SOFT_RST_OUT_DISBALE (0 << CRMR_SOFT_RST_OUT_OFFS)
+
+/* System Software Reset Register */
+/* CPU_SYS_SOFT_RST_REG (CSSRR) */
+
+#define CSSRR_SYSTEM_SOFT_RST BIT0
+
+/* AHB to Mbus Bridge Interrupt Cause Register*/
+/* CPU_AHB_MBUS_CAUSE_INT_REG (CAMCIR) */
+
+#define CAMCIR_ARM_SELF_INT BIT0
+#define CAMCIR_ARM_TIMER0_INT_REQ BIT1
+#define CAMCIR_ARM_TIMER1_INT_REQ BIT2
+#define CAMCIR_ARM_WD_TIMER_INT_REQ BIT3
+
+
+/* AHB to Mbus Bridge Interrupt Mask Register*/
+/* CPU_AHB_MBUS_MASK_INT_REG (CAMMIR) */
+
+#define CAMCIR_ARM_SELF_INT_OFFS 0
+#define CAMCIR_ARM_SELF_INT_MASK BIT0
+#define CAMCIR_ARM_SELF_INT_EN (1 << CAMCIR_ARM_SELF_INT_OFFS)
+#define CAMCIR_ARM_SELF_INT_DIS (0 << CAMCIR_ARM_SELF_INT_OFFS)
+
+
+#define CAMCIR_ARM_TIMER0_INT_REQ_OFFS 1
+#define CAMCIR_ARM_TIMER0_INT_REQ_MASK BIT1
+#define CAMCIR_ARM_TIMER0_INT_REQ_EN (1 << CAMCIR_ARM_TIMER0_INT_REQ_OFFS)
+#define CAMCIR_ARM_TIMER0_INT_REQ_DIS (0 << CAMCIR_ARM_TIMER0_INT_REQ_OFFS)
+
+#define CAMCIR_ARM_TIMER1_INT_REQ_OFFS 2
+#define CAMCIR_ARM_TIMER1_INT_REQ_MASK BIT2
+#define CAMCIR_ARM_TIMER1_INT_REQ_EN (1 << CAMCIR_ARM_TIMER1_INT_REQ_OFFS)
+#define CAMCIR_ARM_TIMER1_INT_REQ_DIS (0 << CAMCIR_ARM_TIMER1_INT_REQ_OFFS)
+
+#define CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS 3
+#define CAMCIR_ARM_WD_TIMER_INT_REQ_MASK BIT3
+#define CAMCIR_ARM_WD_TIMER_INT_REQ_EN (1 << CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS)
+#define CAMCIR_ARM_WD_TIMER_INT_REQ_DIS (0 << CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS)
+
+/* CPU FTDLL Config register (CFCR) fields */
+#define CFCR_FTDLL_ICACHE_TAG_OFFS 0
+#define CFCR_FTDLL_ICACHE_TAG_MASK (0x7F << CFCR_FTDLL_ICACHE_TAG_OFFS)
+#define CFCR_FTDLL_DCACHE_TAG_OFFS 8
+#define CFCR_FTDLL_DCACHE_TAG_MASK (0x7F << CFCR_FTDLL_DCACHE_TAG_OFFS)
+#define CFCR_FTDLL_OVERWRITE_ENABLE (1 << 15)
+/* For Orion 2 D2 only */
+#define CFCR_MRVL_CPU_ID_OFFS 16
+#define CFCR_MRVL_CPU_ID_MASK (0x1 << CFCR_MRVL_CPU_ID_OFFS)
+#define CFCR_ARM_CPU_ID (0x0 << CFCR_MRVL_CPU_ID_OFFS)
+#define CFCR_MRVL_CPU_ID (0x1 << CFCR_MRVL_CPU_ID_OFFS)
+#define CFCR_VFP_SUB_ARC_NUM_OFFS 7
+#define CFCR_VFP_SUB_ARC_NUM_MASK (0x1 << CFCR_VFP_SUB_ARC_NUM_OFFS)
+#define CFCR_VFP_SUB_ARC_NUM_1 (0x0 << CFCR_VFP_SUB_ARC_NUM_OFFS)
+#define CFCR_VFP_SUB_ARC_NUM_2 (0x1 << CFCR_VFP_SUB_ARC_NUM_OFFS)
+
+/* CPU_L2_CONFIG_REG fields */
+#ifdef MV_CPU_LE
+#define CL2CR_L2_ECC_EN_OFFS 2
+#define CL2CR_L2_WT_MODE_OFFS 4
+#else
+#define CL2CR_L2_ECC_EN_OFFS 26
+#define CL2CR_L2_WT_MODE_OFFS 28
+#endif
+
+#define CL2CR_L2_ECC_EN_MASK (1 << CL2CR_L2_ECC_EN_OFFS)
+#define CL2CR_L2_WT_MODE_MASK (1 << CL2CR_L2_WT_MODE_OFFS)
+
+/*******************************************/
+/* Main Interrupt Controller Registers Map */
+/*******************************************/
+
+#define CPU_MAIN_INT_CAUSE_REG 0x20200
+#define CPU_MAIN_IRQ_MASK_REG 0x20204
+#define CPU_MAIN_FIQ_MASK_REG 0x20208
+#define CPU_ENPOINT_MASK_REG 0x2020C
+#define CPU_MAIN_INT_CAUSE_HIGH_REG 0x20210
+#define CPU_MAIN_IRQ_MASK_HIGH_REG 0x20214
+#define CPU_MAIN_FIQ_MASK_HIGH_REG 0x20218
+#define CPU_ENPOINT_MASK_HIGH_REG 0x2021C
+
+
+/*******************************************/
+/* ARM Doorbell Registers Map */
+/*******************************************/
+
+#define CPU_HOST_TO_ARM_DRBL_REG 0x20400
+#define CPU_HOST_TO_ARM_MASK_REG 0x20404
+#define CPU_ARM_TO_HOST_DRBL_REG 0x20408
+#define CPU_ARM_TO_HOST_MASK_REG 0x2040C
+
+
+
+/* CPU control register map */
+/* Set bits means value is about to change according to new value */
+#define CPU_CONFIG_DEFAULT_MASK (CCR_VEC_INIT_LOC_MASK | CCR_AHB_ERROR_PROP_MASK)
+
+#define CPU_CONFIG_DEFAULT (CCR_VEC_INIT_LOC_FF00)
+
+/* CPU Control and status defaults */
+#define CPU_CTRL_STAT_DEFAULT_MASK (CCSR_PCI_ACCESS_MASK)
+
+
+#define CPU_CTRL_STAT_DEFAULT (CCSR_PCI_ACCESS_ENABLE)
+
+#endif /* __INCmvCpuIfRegsh */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#include "mvSysAudio.h"
+
+/*******************************************************************************
+* mvAudioWinSet - Set AUDIO target address window
+*
+* DESCRIPTION:
+* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+* address window, also known as address decode window.
+* After setting this target window, the AUDIO will be able to access the
+* target within the address window.
+*
+* INPUT:
+* winNum - AUDIO target address decode window number.
+* pAddrDecWin - AUDIO target window data structure.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if address window overlapps with other address decode windows.
+* MV_BAD_PARAM if base address is invalid parameter or target is
+* unknown.
+*
+*******************************************************************************/
+MV_STATUS mvAudioWinSet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin)
+{
+ MV_TARGET_ATTRIB targetAttribs;
+ MV_DEC_REGS decRegs;
+
+ /* Parameter checking */
+ if (winNum >= MV_AUDIO_MAX_ADDR_DECODE_WIN)
+ {
+ mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* check if address is aligned to the size */
+ if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvAudioWinSet:Error setting AUDIO window %d to "\
+ "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ winNum,
+ mvCtrlTargetNameGet(pAddrDecWin->target),
+ pAddrDecWin->addrWin.baseLow,
+ pAddrDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+ decRegs.baseReg = 0;
+ decRegs.sizeReg = 0;
+
+ if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+ {
+ mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs);
+
+ /* set attributes */
+ decRegs.sizeReg &= ~MV_AUDIO_WIN_ATTR_MASK;
+ decRegs.sizeReg |= (targetAttribs.attrib << MV_AUDIO_WIN_ATTR_OFFSET);
+
+ /* set target ID */
+ decRegs.sizeReg &= ~MV_AUDIO_WIN_TARGET_MASK;
+ decRegs.sizeReg |= (targetAttribs.targetId << MV_AUDIO_WIN_TARGET_OFFSET);
+
+ if (pAddrDecWin->enable == MV_TRUE)
+ {
+ decRegs.sizeReg |= MV_AUDIO_WIN_ENABLE_MASK;
+ }
+ else
+ {
+ decRegs.sizeReg &= ~MV_AUDIO_WIN_ENABLE_MASK;
+ }
+
+ MV_REG_WRITE( MV_AUDIO_WIN_CTRL_REG(winNum), decRegs.sizeReg);
+ MV_REG_WRITE( MV_AUDIO_WIN_BASE_REG(winNum), decRegs.baseReg);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvAudioWinGet - Get AUDIO peripheral target address window.
+*
+* DESCRIPTION:
+* Get AUDIO peripheral target address window.
+*
+* INPUT:
+* winNum - AUDIO target address decode window number.
+*
+* OUTPUT:
+* pAddrDecWin - AUDIO target window data structure.
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvAudioWinGet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin)
+{
+ MV_DEC_REGS decRegs;
+ MV_TARGET_ATTRIB targetAttrib;
+
+ /* Parameter checking */
+ if (winNum >= MV_AUDIO_MAX_ADDR_DECODE_WIN)
+ {
+ mvOsPrintf("%s : ERR. Invalid winNum %d\n",
+ __FUNCTION__, winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+ decRegs.baseReg = MV_REG_READ( MV_AUDIO_WIN_BASE_REG(winNum) );
+ decRegs.sizeReg = MV_REG_READ( MV_AUDIO_WIN_CTRL_REG(winNum) );
+
+ if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) )
+ {
+ mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ /* attrib and targetId */
+ targetAttrib.attrib = (decRegs.sizeReg & MV_AUDIO_WIN_ATTR_MASK) >>
+ MV_AUDIO_WIN_ATTR_OFFSET;
+ targetAttrib.targetId = (decRegs.sizeReg & MV_AUDIO_WIN_TARGET_MASK) >>
+ MV_AUDIO_WIN_TARGET_OFFSET;
+
+ pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+ /* Check if window is enabled */
+ if(decRegs.sizeReg & MV_AUDIO_WIN_ENABLE_MASK)
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrDecWin->enable = MV_FALSE;
+ }
+ return MV_OK;
+}
+/*******************************************************************************
+* mvAudioAddrDecShow - Print the AUDIO address decode map.
+*
+* DESCRIPTION:
+* This function print the AUDIO address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvAudioAddrDecShow(MV_VOID)
+{
+
+ MV_AUDIO_DEC_WIN win;
+ int i;
+
+ if (MV_FALSE == mvCtrlPwrClckGet(AUDIO_UNIT_ID, 0))
+ return;
+
+
+ mvOsOutput( "\n" );
+ mvOsOutput( "AUDIO:\n" );
+ mvOsOutput( "----\n" );
+
+ for( i = 0; i < MV_AUDIO_MAX_ADDR_DECODE_WIN; i++ )
+ {
+ memset( &win, 0, sizeof(MV_AUDIO_DEC_WIN) );
+
+ mvOsOutput( "win%d - ", i );
+
+ if( mvAudioWinGet( i, &win ) == MV_OK )
+ {
+ if( win.enable )
+ {
+ mvOsOutput( "%s base %08x, ",
+ mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+ mvOsOutput( "...." );
+
+ mvSizePrint( win.addrWin.size );
+
+ mvOsOutput( "\n" );
+ }
+ else
+ mvOsOutput( "disable\n" );
+ }
+ }
+}
+
+
+/*******************************************************************************
+* mvAudioWinInit - Initialize the integrated AUDIO target address window.
+*
+* DESCRIPTION:
+* Initialize the AUDIO peripheral target address window.
+*
+* INPUT:
+*
+*
+* OUTPUT:
+*
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvAudioInit(MV_VOID)
+{
+ int winNum;
+ MV_AUDIO_DEC_WIN audioWin;
+ MV_CPU_DEC_WIN cpuAddrDecWin;
+ MV_U32 status;
+
+ mvAudioHalInit();
+
+ /* Initiate Audio address decode */
+
+ /* First disable all address decode windows */
+ for(winNum = 0; winNum < MV_AUDIO_MAX_ADDR_DECODE_WIN; winNum++)
+ {
+ MV_U32 regVal = MV_REG_READ(MV_AUDIO_WIN_CTRL_REG(winNum));
+ regVal &= ~MV_AUDIO_WIN_ENABLE_MASK;
+ MV_REG_WRITE(MV_AUDIO_WIN_CTRL_REG(winNum), regVal);
+ }
+
+ for(winNum = 0; winNum < MV_AUDIO_MAX_ADDR_DECODE_WIN; winNum++)
+ {
+
+ /* We will set the Window to DRAM_CS0 in default */
+ /* first get attributes from CPU If */
+ status = mvCpuIfTargetWinGet(SDRAM_CS0,
+ &cpuAddrDecWin);
+
+ if (MV_OK != status)
+ {
+ mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ if (cpuAddrDecWin.enable == MV_TRUE)
+ {
+ audioWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+ audioWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+ audioWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+ audioWin.enable = MV_TRUE;
+ audioWin.target = SDRAM_CS0;
+
+ if(MV_OK != mvAudioWinSet(winNum, &audioWin))
+ {
+ return MV_ERROR;
+ }
+ }
+ }
+
+ return MV_OK;
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __INCMVSysAudioH
+#define __INCMVSysAudioH
+
+#include "mvCommon.h"
+#include "audio/mvAudio.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+/***********************************/
+/* Audio Address Decoding registers*/
+/***********************************/
+
+#define MV_AUDIO_MAX_ADDR_DECODE_WIN 2
+#define MV_AUDIO_RECORD_WIN_NUM 0
+#define MV_AUDIO_PLAYBACK_WIN_NUM 1
+
+#define MV_AUDIO_WIN_CTRL_REG(win) (AUDIO_REG_BASE + 0xA04 + ((win)<<3))
+#define MV_AUDIO_WIN_BASE_REG(win) (AUDIO_REG_BASE + 0xA00 + ((win)<<3))
+
+#define MV_AUDIO_RECORD_WIN_CTRL_REG MV_AUDIO_WIN_CTRL_REG(MV_AUDIO_RECORD_WIN_NUM)
+#define MV_AUDIO_RECORD_WIN_BASE_REG MV_AUDIO_WIN_BASE_REG(MV_AUDIO_RECORD_WIN_NUM)
+#define MV_AUDIO_PLAYBACK_WIN_CTRL_REG MV_AUDIO_WIN_CTRL_REG(MV_AUDIO_PLAYBACK_WIN_NUM)
+#define MV_AUDIO_PLAYBACK_WIN_BASE_REG MV_AUDIO_WIN_BASE_REG(MV_AUDIO_PLAYBACK_WIN_NUM)
+
+
+/* BITs in Windows 0-3 Control and Base Registers */
+#define MV_AUDIO_WIN_ENABLE_BIT 0
+#define MV_AUDIO_WIN_ENABLE_MASK (1<<MV_AUDIO_WIN_ENABLE_BIT)
+
+#define MV_AUDIO_WIN_TARGET_OFFSET 4
+#define MV_AUDIO_WIN_TARGET_MASK (0xF<<MV_AUDIO_WIN_TARGET_OFFSET)
+
+#define MV_AUDIO_WIN_ATTR_OFFSET 8
+#define MV_AUDIO_WIN_ATTR_MASK (0xFF<<MV_AUDIO_WIN_ATTR_OFFSET)
+
+#define MV_AUDIO_WIN_SIZE_OFFSET 16
+#define MV_AUDIO_WIN_SIZE_MASK (0xFFFF<<MV_AUDIO_WIN_SIZE_OFFSET)
+
+#define MV_AUDIO_WIN_BASE_OFFSET 16
+#define MV_AUDIO_WIN_BASE_MASK (0xFFFF<<MV_AUDIO_WIN_BASE_OFFSET)
+
+
+typedef struct _mvAudioDecWin
+{
+ MV_TARGET target;
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+} MV_AUDIO_DEC_WIN;
+
+
+MV_STATUS mvAudioInit(MV_VOID);
+MV_STATUS mvAudioWinGet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin);
+MV_STATUS mvAudioWinSet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin);
+MV_STATUS mvAudioWinInit(MV_VOID);
+MV_VOID mvAudioAddrDecShow(MV_VOID);
+
+
+#endif
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvSysCesa.h"
+
+#if (MV_CESA_VERSION >= 2)
+MV_TARGET tdmaAddrDecPrioTable[] =
+{
+#if defined(MV_INCLUDE_SDRAM_CS0)
+ SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+ SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+ SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+ SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_PEX)
+ PEX0_MEM,
+#endif
+
+ TBL_TERM
+};
+
+/*******************************************************************************
+* mvCesaWinGet - Get TDMA target address window.
+*
+* DESCRIPTION:
+* Get TDMA target address window.
+*
+* INPUT:
+* winNum - TDMA target address decode window number.
+*
+* OUTPUT:
+* pDecWin - TDMA target window data structure.
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+static MV_STATUS mvCesaWinGet(MV_U32 winNum, MV_DEC_WIN *pDecWin)
+{
+ MV_DEC_WIN_PARAMS winParam;
+ MV_U32 sizeReg, baseReg;
+
+ /* Parameter checking */
+ if (winNum >= MV_CESA_TDMA_ADDR_DEC_WIN)
+ {
+ mvOsPrintf("%s : ERR. Invalid winNum %d\n",
+ __FUNCTION__, winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+ baseReg = MV_REG_READ( MV_CESA_TDMA_BASE_ADDR_REG(winNum) );
+ sizeReg = MV_REG_READ( MV_CESA_TDMA_WIN_CTRL_REG(winNum) );
+
+ /* Check if window is enabled */
+ if(sizeReg & MV_CESA_TDMA_WIN_ENABLE_MASK)
+ {
+ pDecWin->enable = MV_TRUE;
+
+ /* Extract window parameters from registers */
+ winParam.targetId = (sizeReg & MV_CESA_TDMA_WIN_TARGET_MASK) >> MV_CESA_TDMA_WIN_TARGET_OFFSET;
+ winParam.attrib = (sizeReg & MV_CESA_TDMA_WIN_ATTR_MASK) >> MV_CESA_TDMA_WIN_ATTR_OFFSET;
+ winParam.size = (sizeReg & MV_CESA_TDMA_WIN_SIZE_MASK) >> MV_CESA_TDMA_WIN_SIZE_OFFSET;
+ winParam.baseAddr = (baseReg & MV_CESA_TDMA_WIN_BASE_MASK);
+
+ /* Translate the decode window parameters to address decode struct */
+ if (MV_OK != mvCtrlParamsToAddrDec(&winParam, pDecWin))
+ {
+ mvOsPrintf("Failed to translate register parameters to CESA address" \
+ " decode window structure\n");
+ return MV_ERROR;
+ }
+ }
+ else
+ {
+ pDecWin->enable = MV_FALSE;
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* cesaWinOverlapDetect - Detect CESA TDMA address windows overlapping
+*
+* DESCRIPTION:
+* An unpredicted behaviur is expected in case TDMA address decode
+* windows overlapps.
+* This function detects TDMA address decode windows overlapping of a
+* specified window. The function does not check the window itself for
+* overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+* winNum - address decode window number.
+* pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE - if the given address window overlap current address
+* decode map,
+* MV_FALSE - otherwise, MV_ERROR if reading invalid data
+* from registers.
+*
+*******************************************************************************/
+static MV_STATUS cesaWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 winNumIndex;
+ MV_DEC_WIN addrDecWin;
+
+ for(winNumIndex=0; winNumIndex<MV_CESA_TDMA_ADDR_DEC_WIN; winNumIndex++)
+ {
+ /* Do not check window itself */
+ if (winNumIndex == winNum)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvCesaWinGet(winNumIndex, &addrDecWin))
+ {
+ mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ /* Do not check disabled windows */
+ if(addrDecWin.enable == MV_FALSE)
+ {
+ continue;
+ }
+
+ if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+ {
+ return MV_TRUE;
+ }
+ }
+ return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvCesaTdmaWinSet - Set CESA TDMA target address window
+*
+* DESCRIPTION:
+* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+* address window, also known as address decode window.
+* After setting this target window, the CESA TDMA will be able to access the
+* target within the address window.
+*
+* INPUT:
+* winNum - CESA TDMA target address decode window number.
+* pAddrDecWin - CESA TDMA target window data structure.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR - if address window overlapps with other address decode windows.
+* MV_BAD_PARAM - if base address is invalid parameter or target is
+* unknown.
+*
+*******************************************************************************/
+static MV_STATUS mvCesaTdmaWinSet(MV_U32 winNum, MV_DEC_WIN *pDecWin)
+{
+ MV_DEC_WIN_PARAMS winParams;
+ MV_U32 sizeReg, baseReg;
+
+ /* Parameter checking */
+ if (winNum >= MV_CESA_TDMA_ADDR_DEC_WIN)
+ {
+ mvOsPrintf("mvCesaTdmaWinSet: ERR. Invalid win num %d\n",winNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check if the requested window overlapps with current windows */
+ if (MV_TRUE == cesaWinOverlapDetect(winNum, &pDecWin->addrWin))
+ {
+ mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum);
+ return MV_ERROR;
+ }
+
+ /* check if address is aligned to the size */
+ if(MV_IS_NOT_ALIGN(pDecWin->addrWin.baseLow, pDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvCesaTdmaWinSet: Error setting CESA TDMA window %d to "\
+ "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ winNum,
+ mvCtrlTargetNameGet(pDecWin->target),
+ pDecWin->addrWin.baseLow,
+ pDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+ if(MV_OK != mvCtrlAddrDecToParams(pDecWin, &winParams))
+ {
+ mvOsPrintf("%s: mvCtrlAddrDecToParams Failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ /* set Size, Attributes and TargetID */
+ sizeReg = (((winParams.targetId << MV_CESA_TDMA_WIN_TARGET_OFFSET) & MV_CESA_TDMA_WIN_TARGET_MASK) |
+ ((winParams.attrib << MV_CESA_TDMA_WIN_ATTR_OFFSET) & MV_CESA_TDMA_WIN_ATTR_MASK) |
+ ((winParams.size << MV_CESA_TDMA_WIN_SIZE_OFFSET) & MV_CESA_TDMA_WIN_SIZE_MASK));
+
+ if (pDecWin->enable == MV_TRUE)
+ {
+ sizeReg |= MV_CESA_TDMA_WIN_ENABLE_MASK;
+ }
+ else
+ {
+ sizeReg &= ~MV_CESA_TDMA_WIN_ENABLE_MASK;
+ }
+
+ /* Update Base value */
+ baseReg = (winParams.baseAddr & MV_CESA_TDMA_WIN_BASE_MASK);
+
+ MV_REG_WRITE( MV_CESA_TDMA_WIN_CTRL_REG(winNum), sizeReg);
+ MV_REG_WRITE( MV_CESA_TDMA_BASE_ADDR_REG(winNum), baseReg);
+
+ return MV_OK;
+}
+
+
+static MV_STATUS mvCesaTdmaAddrDecInit (void)
+{
+ MV_U32 winNum;
+ MV_STATUS status;
+ MV_CPU_DEC_WIN cpuAddrDecWin;
+ MV_DEC_WIN cesaWin;
+ MV_U32 winPrioIndex = 0;
+
+ /* First disable all address decode windows */
+ for(winNum=0; winNum<MV_CESA_TDMA_ADDR_DEC_WIN; winNum++)
+ {
+ MV_REG_BIT_RESET(MV_CESA_TDMA_WIN_CTRL_REG(winNum), MV_CESA_TDMA_WIN_ENABLE_MASK);
+ }
+
+ /* Go through all windows in user table until table terminator */
+ winNum = 0;
+ while( (tdmaAddrDecPrioTable[winPrioIndex] != TBL_TERM) &&
+ (winNum < MV_CESA_TDMA_ADDR_DEC_WIN) ) {
+
+ /* first get attributes from CPU If */
+ status = mvCpuIfTargetWinGet(tdmaAddrDecPrioTable[winPrioIndex],
+ &cpuAddrDecWin);
+ if(MV_NO_SUCH == status){
+ winPrioIndex++;
+ continue;
+ }
+
+ if (MV_OK != status)
+ {
+ mvOsPrintf("cesaInit: TargetWinGet failed. winNum=%d, winIdx=%d, target=%d, status=0x%x\n",
+ winNum, winPrioIndex, tdmaAddrDecPrioTable[winPrioIndex], status);
+ return MV_ERROR;
+ }
+ if (cpuAddrDecWin.enable == MV_TRUE)
+ {
+ cesaWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+ cesaWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+ cesaWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+ cesaWin.enable = MV_TRUE;
+ cesaWin.target = tdmaAddrDecPrioTable[winPrioIndex];
+
+#if defined(MV646xx)
+ /* Get the default attributes for that target window */
+ mvCtrlDefAttribGet(cesaWin.target, &cesaWin.addrWinAttr);
+#endif /* MV646xx */
+
+ if(MV_OK != mvCesaTdmaWinSet(winNum, &cesaWin))
+ {
+ mvOsPrintf("mvCesaTdmaWinSet FAILED: winNum=%d\n",
+ winNum);
+ return MV_ERROR;
+ }
+ winNum++;
+ }
+ winPrioIndex++;
+ }
+ return MV_OK;
+}
+#endif /* MV_CESA_VERSION >= 2 */
+
+
+
+
+MV_STATUS mvCesaInit (int numOfSession, int queueDepth, char* pSramBase, void *osHandle)
+{
+ MV_U32 cesaCryptEngBase;
+ MV_CPU_DEC_WIN addrDecWin;
+
+ if(sizeof(MV_CESA_SRAM_MAP) > MV_CESA_SRAM_SIZE)
+ {
+ mvOsPrintf("mvCesaInit: Wrong SRAM map - %ld > %d\n",
+ sizeof(MV_CESA_SRAM_MAP), MV_CESA_SRAM_SIZE);
+ return MV_FAIL;
+ }
+#if 0
+ if (mvCpuIfTargetWinGet(CRYPT_ENG, &addrDecWin) == MV_OK)
+ cesaCryptEngBase = addrDecWin.addrWin.baseLow;
+ else
+ {
+ mvOsPrintf("mvCesaInit: ERR. mvCpuIfTargetWinGet failed\n");
+ return MV_ERROR;
+ }
+#else
+ cesaCryptEngBase = (MV_U32)pSramBase;
+#endif
+
+#if 0 /* Already done in the platform init */
+#if (MV_CESA_VERSION >= 2)
+ mvCesaTdmaAddrDecInit();
+#endif /* MV_CESA_VERSION >= 2 */
+#endif
+ return mvCesaHalInit(numOfSession, queueDepth, pSramBase, cesaCryptEngBase,
+ osHandle);
+
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __mvSysCesa_h__
+#define __mvSysCesa_h__
+
+
+#include "mvCommon.h"
+#include "cesa/mvCesa.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+/***************************** TDMA Registers *************************************/
+
+#define MV_CESA_TDMA_ADDR_DEC_WIN 4
+
+#define MV_CESA_TDMA_BASE_ADDR_REG(win) (MV_CESA_TDMA_REG_BASE + 0xa00 + (win<<3))
+
+#define MV_CESA_TDMA_WIN_CTRL_REG(win) (MV_CESA_TDMA_REG_BASE + 0xa04 + (win<<3))
+
+#define MV_CESA_TDMA_WIN_ENABLE_BIT 0
+#define MV_CESA_TDMA_WIN_ENABLE_MASK (1 << MV_CESA_TDMA_WIN_ENABLE_BIT)
+
+#define MV_CESA_TDMA_WIN_TARGET_OFFSET 4
+#define MV_CESA_TDMA_WIN_TARGET_MASK (0xf << MV_CESA_TDMA_WIN_TARGET_OFFSET)
+
+#define MV_CESA_TDMA_WIN_ATTR_OFFSET 8
+#define MV_CESA_TDMA_WIN_ATTR_MASK (0xff << MV_CESA_TDMA_WIN_ATTR_OFFSET)
+
+#define MV_CESA_TDMA_WIN_SIZE_OFFSET 16
+#define MV_CESA_TDMA_WIN_SIZE_MASK (0xFFFF << MV_CESA_TDMA_WIN_SIZE_OFFSET)
+
+#define MV_CESA_TDMA_WIN_BASE_OFFSET 16
+#define MV_CESA_TDMA_WIN_BASE_MASK (0xFFFF << MV_CESA_TDMA_WIN_BASE_OFFSET)
+
+
+MV_STATUS mvCesaInit (int numOfSession, int queueDepth, char* pSramBase, void *osHandle);
+
+#endif
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+
+#include "ddr2/mvDramIf.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/sys/mvSysDram.h"
+
+/* #define MV_DEBUG */
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin);
+
+/*******************************************************************************
+* mvDramIfWinSet - Set DRAM interface address decode window
+*
+* DESCRIPTION:
+* This function sets DRAM interface address decode window.
+*
+* INPUT:
+* target - System target. Use only SDRAM targets.
+* pAddrDecWin - SDRAM address window structure.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK
+* otherwise.
+*******************************************************************************/
+MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin)
+{
+ MV_U32 baseReg=0,sizeReg=0;
+ MV_U32 baseToReg=0 , sizeToReg=0;
+
+ /* Check parameters */
+ if (!MV_TARGET_IS_DRAM(target))
+ {
+ mvOsPrintf("mvDramIfWinSet: target %d is not SDRAM\n", target);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check if the requested window overlaps with current enabled windows */
+ if (MV_TRUE == sdramIfWinOverlap(target, &pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("mvDramIfWinSet: ERR. Target %d overlaps\n", target);
+ return MV_BAD_PARAM;
+ }
+
+ /* check if address is aligned to the size */
+ if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvDramIfWinSet:Error setting DRAM interface window %d."\
+ "\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ target,
+ pAddrDecWin->addrWin.baseLow,
+ pAddrDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+ /* read base register*/
+ baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(0,target));
+
+ /* read size register */
+ sizeReg = MV_REG_READ(SDRAM_SIZE_REG(0,target));
+
+ /* BaseLow[31:16] => base register [31:16] */
+ baseToReg = pAddrDecWin->addrWin.baseLow & SCBAR_BASE_MASK;
+
+ /* Write to address decode Base Address Register */
+ baseReg &= ~SCBAR_BASE_MASK;
+ baseReg |= baseToReg;
+
+ /* Translate the given window size to register format */
+ sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, SCSR_SIZE_ALIGNMENT);
+
+ /* Size parameter validity check. */
+ if (-1 == sizeToReg)
+ {
+ mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n",target);
+ return MV_BAD_PARAM;
+ }
+
+ /* set size */
+ sizeReg &= ~SCSR_SIZE_MASK;
+ /* Size is located at upper 16 bits */
+ sizeReg |= (sizeToReg << SCSR_SIZE_OFFS);
+
+ /* enable/Disable */
+ if (MV_TRUE == pAddrDecWin->enable)
+ {
+ sizeReg |= SCSR_WIN_EN;
+ }
+ else
+ {
+ sizeReg &= ~SCSR_WIN_EN;
+ }
+
+ /* 3) Write to address decode Base Address Register */
+ MV_REG_WRITE(SDRAM_BASE_ADDR_REG(0,target), baseReg);
+
+ /* Write to address decode Size Register */
+ MV_REG_WRITE(SDRAM_SIZE_REG(0,target), sizeReg);
+
+ return MV_OK;
+}
+/*******************************************************************************
+* mvDramIfWinGet - Get DRAM interface address decode window
+*
+* DESCRIPTION:
+* This function gets DRAM interface address decode window.
+*
+* INPUT:
+* target - System target. Use only SDRAM targets.
+*
+* OUTPUT:
+* pAddrDecWin - SDRAM address window structure.
+*
+* RETURN:
+* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK
+* otherwise.
+*******************************************************************************/
+MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin)
+{
+ MV_U32 baseReg,sizeReg;
+ MV_U32 sizeRegVal;
+ /* Check parameters */
+ if (!MV_TARGET_IS_DRAM(target))
+ {
+ mvOsPrintf("mvDramIfWinGet: target %d is Illigal\n", target);
+ return MV_ERROR;
+ }
+
+ /* Read base and size registers */
+ sizeReg = MV_REG_READ(SDRAM_SIZE_REG(0,target));
+ baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(0,target));
+
+ sizeRegVal = (sizeReg & SCSR_SIZE_MASK) >> SCSR_SIZE_OFFS;
+
+ pAddrDecWin->addrWin.size = ctrlRegToSize(sizeRegVal,
+ SCSR_SIZE_ALIGNMENT);
+
+ /* Check if ctrlRegToSize returned OK */
+ if (-1 == pAddrDecWin->addrWin.size)
+ {
+ mvOsPrintf("mvDramIfWinGet: size of target %d is Illigal\n", target);
+ return MV_ERROR;
+ }
+
+ /* Extract base address */
+ /* Base register [31:16] ==> baseLow[31:16] */
+ pAddrDecWin->addrWin.baseLow = baseReg & SCBAR_BASE_MASK;
+
+ pAddrDecWin->addrWin.baseHigh = 0;
+
+
+ if (sizeReg & SCSR_WIN_EN)
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrDecWin->enable = MV_FALSE;
+ }
+
+ return MV_OK;
+}
+/*******************************************************************************
+* mvDramIfWinEnable - Enable/Disable SDRAM address decode window
+*
+* DESCRIPTION:
+* This function enable/Disable SDRAM address decode window.
+*
+* INPUT:
+* target - System target. Use only SDRAM targets.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR in case function parameter are invalid, MV_OK otherewise.
+*
+*******************************************************************************/
+MV_STATUS mvDramIfWinEnable(MV_TARGET target, MV_BOOL enable)
+{
+ MV_DRAM_DEC_WIN addrDecWin;
+
+ /* Check parameters */
+ if (!MV_TARGET_IS_DRAM(target))
+ {
+ mvOsPrintf("mvDramIfWinEnable: target %d is Illigal\n", target);
+ return MV_ERROR;
+ }
+
+ if (enable == MV_TRUE)
+ { /* First check for overlap with other enabled windows */
+ if (MV_OK != mvDramIfWinGet(target, &addrDecWin))
+ {
+ mvOsPrintf("mvDramIfWinEnable:ERR. Getting target %d failed.\n",
+ target);
+ return MV_ERROR;
+ }
+ /* Check for overlapping */
+ if (MV_FALSE == sdramIfWinOverlap(target, &(addrDecWin.addrWin)))
+ {
+ /* No Overlap. Enable address decode winNum window */
+ MV_REG_BIT_SET(SDRAM_SIZE_REG(0,target), SCSR_WIN_EN);
+ }
+ else
+ { /* Overlap detected */
+ mvOsPrintf("mvDramIfWinEnable: ERR. Target %d overlap detect\n",
+ target);
+ return MV_ERROR;
+ }
+ }
+ else
+ { /* Disable address decode winNum window */
+ MV_REG_BIT_RESET(SDRAM_SIZE_REG(0, target), SCSR_WIN_EN);
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* sdramIfWinOverlap - Check if an address window overlap an SDRAM address window
+*
+* DESCRIPTION:
+* This function scan each SDRAM address decode window to test if it
+* overlapps the given address windoow
+*
+* INPUT:
+* target - SDRAM target where the function skips checking.
+* pAddrDecWin - The tested address window for overlapping with
+* SDRAM windows.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlaps any enabled address
+* decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin)
+{
+ MV_TARGET targetNum;
+ MV_DRAM_DEC_WIN addrDecWin;
+
+ for(targetNum = SDRAM_CS0; targetNum < MV_DRAM_MAX_CS ; targetNum++)
+ {
+ /* don't check our winNum or illegal targets */
+ if (targetNum == target)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvDramIfWinGet(targetNum, &addrDecWin))
+ {
+ mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n");
+ return MV_ERROR;
+ }
+
+ /* Do not check disabled windows */
+ if (MV_FALSE == addrDecWin.enable)
+ {
+ continue;
+ }
+
+ if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin))
+ {
+ mvOsPrintf(
+ "sdramIfWinOverlap: Required target %d overlap winNum %d\n",
+ target, targetNum);
+ return MV_TRUE;
+ }
+ }
+
+ return MV_FALSE;
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __sysDram
+#define __sysDram
+
+/* This structure describes CPU interface address decode window */
+typedef struct _mvDramIfDecWin
+{
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+}MV_DRAM_DEC_WIN;
+
+MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvDramIfWinEnable(MV_TARGET target, MV_BOOL enable);
+
+#endif
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "ctrlEnv/sys/mvSysGbe.h"
+
+
+
+typedef struct _mvEthDecWin
+{
+ MV_TARGET target;
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+}MV_ETH_DEC_WIN;
+
+MV_TARGET ethAddrDecPrioTap[] =
+{
+#if defined(MV_INCLUDE_SDRAM_CS0)
+ SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+ SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+ SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+ SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS0)
+ DEVICE_CS0,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS1)
+ DEVICE_CS1,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS2)
+ DEVICE_CS2,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS3)
+ DEVICE_CS3,
+#endif
+#if defined(MV_INCLUDE_PEX)
+ PEX0_IO,
+#endif
+ TBL_TERM
+};
+
+static MV_STATUS ethWinOverlapDetect(int port, MV_U32 winNum, MV_ADDR_WIN *pAddrWin);
+static MV_STATUS mvEthWinSet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin);
+static MV_STATUS mvEthWinGet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin);
+
+
+/*******************************************************************************
+* mvEthWinInit - Initialize ETH address decode windows
+*
+* DESCRIPTION:
+* This function initialize ETH window decode unit. It set the
+* default address decode windows of the unit.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if setting fail.
+*******************************************************************************/
+/* Configure EthDrv memory map registes. */
+MV_STATUS mvEthWinInit (int port)
+{
+ MV_U32 winNum, status, winPrioIndex=0, i, regVal=0;
+ MV_ETH_DEC_WIN ethWin;
+ MV_CPU_DEC_WIN cpuAddrDecWin;
+ static MV_U32 accessProtReg = 0;
+
+#if (MV_ETH_VERSION <= 1)
+ static MV_BOOL isFirst = MV_TRUE;
+
+ if(isFirst == MV_FALSE)
+ {
+ MV_REG_WRITE(ETH_ACCESS_PROTECT_REG(port), accessProtReg);
+ return MV_OK;
+ }
+ isFirst = MV_FALSE;
+#endif /* MV_GIGA_ETH_VERSION */
+
+ /* Initiate Ethernet address decode */
+
+ /* First disable all address decode windows */
+ for(winNum=0; winNum<ETH_MAX_DECODE_WIN; winNum++)
+ {
+ regVal |= MV_BIT_MASK(winNum);
+ }
+ MV_REG_WRITE(ETH_BASE_ADDR_ENABLE_REG(port), regVal);
+
+ /* Go through all windows in user table until table terminator */
+ for (winNum=0; ((ethAddrDecPrioTap[winPrioIndex] != TBL_TERM) &&
+ (winNum < ETH_MAX_DECODE_WIN)); )
+ {
+ /* first get attributes from CPU If */
+ status = mvCpuIfTargetWinGet(ethAddrDecPrioTap[winPrioIndex],
+ &cpuAddrDecWin);
+
+ if(MV_NO_SUCH == status)
+ {
+ winPrioIndex++;
+ continue;
+ }
+ if (MV_OK != status)
+ {
+ mvOsPrintf("mvEthWinInit: ERR. mvCpuIfTargetWinGet failed\n");
+ return MV_ERROR;
+ }
+
+ if (cpuAddrDecWin.enable == MV_TRUE)
+ {
+ ethWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+ ethWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+ ethWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+ ethWin.enable = MV_TRUE;
+ ethWin.target = ethAddrDecPrioTap[winPrioIndex];
+
+ if(MV_OK != mvEthWinSet(port, winNum, ðWin))
+ {
+ mvOsPrintf("mvEthWinInit: ERR. mvEthWinSet failed winNum=%d\n",
+ winNum);
+ return MV_ERROR;
+ }
+ winNum++;
+ }
+ winPrioIndex ++;
+ }
+
+ /* set full access to all windows. */
+ for(i=0; i<winNum; i++)
+ {
+ accessProtReg |= (FULL_ACCESS << (i*2));
+ }
+ MV_REG_WRITE(ETH_ACCESS_PROTECT_REG(port), accessProtReg);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthWinSet - Set ETH target address window
+*
+* DESCRIPTION:
+* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+* address window, also known as address decode window.
+* After setting this target window, the ETH will be able to access the
+* target within the address window.
+*
+* INPUT:
+* winNum - ETH to target address decode window number.
+* pAddrDecWin - ETH target window data structure.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if address window overlapps with other address decode windows.
+* MV_BAD_PARAM if base address is invalid parameter or target is
+* unknown.
+*
+*******************************************************************************/
+MV_STATUS mvEthWinSet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin)
+{
+ MV_TARGET_ATTRIB targetAttribs;
+ MV_DEC_REGS decRegs;
+
+ /* Parameter checking */
+ if (winNum >= ETH_MAX_DECODE_WIN)
+ {
+ mvOsPrintf("mvEthWinSet: ERR. Invalid win num %d\n",winNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check if the requested window overlapps with current windows */
+ if (MV_TRUE == ethWinOverlapDetect(port, winNum, &pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("mvEthWinSet: ERR. Window %d overlap\n", winNum);
+ return MV_ERROR;
+ }
+
+ /* check if address is aligned to the size */
+ if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvEthWinSet: Error setting Ethernet window %d to "\
+ "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ winNum,
+ mvCtrlTargetNameGet(pAddrDecWin->target),
+ pAddrDecWin->addrWin.baseLow,
+ pAddrDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+
+ decRegs.baseReg = MV_REG_READ(ETH_WIN_BASE_REG(port, winNum));
+ decRegs.sizeReg = MV_REG_READ(ETH_WIN_SIZE_REG(port, winNum));
+
+ if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+ {
+ mvOsPrintf("mvEthWinSet:mvCtrlAddrDecToReg Failed\n");
+ return MV_ERROR;
+ }
+
+ mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs);
+
+ /* set attributes */
+ decRegs.baseReg &= ~ETH_WIN_ATTR_MASK;
+ decRegs.baseReg |= targetAttribs.attrib << ETH_WIN_ATTR_OFFS;
+ /* set target ID */
+ decRegs.baseReg &= ~ETH_WIN_TARGET_MASK;
+ decRegs.baseReg |= targetAttribs.targetId << ETH_WIN_TARGET_OFFS;
+
+ /* for the safe side we disable the window before writing the new
+ values */
+ mvEthWinEnable(port, winNum, MV_FALSE);
+ MV_REG_WRITE(ETH_WIN_BASE_REG(port, winNum), decRegs.baseReg);
+
+ /* Write to address decode Size Register */
+ MV_REG_WRITE(ETH_WIN_SIZE_REG(port, winNum), decRegs.sizeReg);
+
+ /* Enable address decode target window */
+ if (pAddrDecWin->enable == MV_TRUE)
+ {
+ mvEthWinEnable(port, winNum, MV_TRUE);
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvETHWinGet - Get dma peripheral target address window.
+*
+* DESCRIPTION:
+* Get ETH peripheral target address window.
+*
+* INPUT:
+* winNum - ETH to target address decode window number.
+*
+* OUTPUT:
+* pAddrDecWin - ETH target window data structure.
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvEthWinGet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin)
+{
+ MV_DEC_REGS decRegs;
+ MV_TARGET_ATTRIB targetAttrib;
+
+ /* Parameter checking */
+ if (winNum >= ETH_MAX_DECODE_WIN)
+ {
+ mvOsPrintf("mvEthWinGet: ERR. Invalid winNum %d\n", winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+ decRegs.baseReg = MV_REG_READ(ETH_WIN_BASE_REG(port, winNum));
+ decRegs.sizeReg = MV_REG_READ(ETH_WIN_SIZE_REG(port, winNum));
+
+ if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin)))
+ {
+ mvOsPrintf("mvAhbToMbusWinGet: mvCtrlRegToAddrDec Failed \n");
+ return MV_ERROR;
+ }
+
+ /* attrib and targetId */
+ targetAttrib.attrib =
+ (decRegs.baseReg & ETH_WIN_ATTR_MASK) >> ETH_WIN_ATTR_OFFS;
+ targetAttrib.targetId =
+ (decRegs.baseReg & ETH_WIN_TARGET_MASK) >> ETH_WIN_TARGET_OFFS;
+
+ pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+ /* Check if window is enabled */
+ if (~(MV_REG_READ(ETH_BASE_ADDR_ENABLE_REG(port))) & (1 << winNum) )
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrDecWin->enable = MV_FALSE;
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthWinEnable - Enable/disable a ETH to target address window
+*
+* DESCRIPTION:
+* This function enable/disable a ETH to target address window.
+* According to parameter 'enable' the routine will enable the
+* window, thus enabling ETH accesses (before enabling the window it is
+* tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+* winNum - ETH to target address decode window number.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* N/A
+*
+* RETURN:
+* MV_ERROR if decode window number was wrong or enabled window overlapps.
+*
+*******************************************************************************/
+MV_STATUS mvEthWinEnable(int port, MV_U32 winNum,MV_BOOL enable)
+{
+ MV_ETH_DEC_WIN addrDecWin;
+
+ /* Parameter checking */
+ if (winNum >= ETH_MAX_DECODE_WIN)
+ {
+ mvOsPrintf("mvEthTargetWinEnable:ERR. Invalid winNum%d\n",winNum);
+ return MV_ERROR;
+ }
+
+ if (enable == MV_TRUE)
+ { /* First check for overlap with other enabled windows */
+ /* Get current window */
+ if (MV_OK != mvEthWinGet(port, winNum, &addrDecWin))
+ {
+ mvOsPrintf("mvEthTargetWinEnable:ERR. targetWinGet fail\n");
+ return MV_ERROR;
+ }
+ /* Check for overlapping */
+ if (MV_FALSE == ethWinOverlapDetect(port, winNum, &(addrDecWin.addrWin)))
+ {
+ /* No Overlap. Enable address decode target window */
+ MV_REG_BIT_RESET(ETH_BASE_ADDR_ENABLE_REG(port), (1 << winNum));
+ }
+ else
+ { /* Overlap detected */
+ mvOsPrintf("mvEthTargetWinEnable:ERR. Overlap detected\n");
+ return MV_ERROR;
+ }
+ }
+ else
+ { /* Disable address decode target window */
+ MV_REG_BIT_SET(ETH_BASE_ADDR_ENABLE_REG(port), (1 << winNum));
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthWinTargetGet - Get Window number associated with target
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+* window number
+*
+*******************************************************************************/
+MV_U32 mvEthWinTargetGet(int port, MV_TARGET target)
+{
+ MV_ETH_DEC_WIN decWin;
+ MV_U32 winNum;
+
+ /* Check parameters */
+ if (target >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetGet: target %d is Illigal\n", target);
+ return 0xffffffff;
+ }
+
+ for (winNum=0; winNum<ETH_MAX_DECODE_WIN; winNum++)
+ {
+ if (mvEthWinGet(port, winNum,&decWin) != MV_OK)
+ {
+ mvOsPrintf("mvAhbToMbusWinTargetGet: window returned error\n");
+ return 0xffffffff;
+ }
+
+ if (decWin.enable == MV_TRUE)
+ {
+ if (decWin.target == target)
+ {
+ return winNum;
+ }
+ }
+ }
+ return 0xFFFFFFFF;
+}
+
+/*******************************************************************************
+* mvEthProtWinSet - Set access protection of Ethernet to target window.
+*
+* DESCRIPTION:
+* Each Ethernet port can be configured with access attributes for each
+* of the Ethenret to target windows (address decode windows). This
+* function sets access attributes to a given window for the given channel.
+*
+* INPUTS:
+* ethPort - ETH channel number. See MV_ETH_CHANNEL enumerator.
+* winNum - IETH to target address decode window number.
+* access - IETH access rights. See MV_ACCESS_RIGHTS enumerator.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR in case window number is invalid or access right reserved.
+*
+*******************************************************************************/
+MV_STATUS mvEthProtWinSet(MV_U32 portNo, MV_U32 winNum, MV_ACCESS_RIGHTS access)
+{
+ MV_U32 protReg;
+
+ /* Parameter checking */
+ if(portNo >= mvCtrlEthMaxPortGet())
+ {
+ mvOsPrintf("mvEthProtWinSet:ERR. Invalid port number %d\n", portNo);
+ return MV_ERROR;
+ }
+
+ if (winNum >= ETH_MAX_DECODE_WIN)
+ {
+ mvOsPrintf("mvEthProtWinSet:ERR. Invalid winNum%d\n",winNum);
+ return MV_ERROR;
+ }
+
+ if((access == ACC_RESERVED) || (access >= MAX_ACC_RIGHTS))
+ {
+ mvOsPrintf("mvEthProtWinSet:ERR. Inv access param %d\n", access);
+ return MV_ERROR;
+ }
+ /* Read current protection register */
+ protReg = MV_REG_READ(ETH_ACCESS_PROTECT_REG(portNo));
+
+ /* Clear protection window field */
+ protReg &= ~(ETH_PROT_WIN_MASK(winNum));
+
+ /* Set new protection field value */
+ protReg |= (access << (ETH_PROT_WIN_OFFS(winNum)));
+
+ /* Write protection register back */
+ MV_REG_WRITE(ETH_ACCESS_PROTECT_REG(portNo), protReg);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* ethWinOverlapDetect - Detect ETH address windows overlapping
+*
+* DESCRIPTION:
+* An unpredicted behaviur is expected in case ETH address decode
+* windows overlapps.
+* This function detects ETH address decode windows overlapping of a
+* specified window. The function does not check the window itself for
+* overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+* winNum - address decode window number.
+* pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlap current address
+* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data
+* from registers.
+*
+*******************************************************************************/
+static MV_STATUS ethWinOverlapDetect(int port, MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 baseAddrEnableReg;
+ MV_U32 winNumIndex;
+ MV_ETH_DEC_WIN addrDecWin;
+
+ /* Read base address enable register. Do not check disabled windows */
+ baseAddrEnableReg = MV_REG_READ(ETH_BASE_ADDR_ENABLE_REG(port));
+
+ for (winNumIndex=0; winNumIndex<ETH_MAX_DECODE_WIN; winNumIndex++)
+ {
+ /* Do not check window itself */
+ if (winNumIndex == winNum)
+ {
+ continue;
+ }
+
+ /* Do not check disabled windows */
+ if (baseAddrEnableReg & (1 << winNumIndex))
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvEthWinGet(port, winNumIndex, &addrDecWin))
+ {
+ mvOsPrintf("ethWinOverlapDetect: ERR. TargetWinGet failed\n");
+ return MV_ERROR;
+ }
+/*
+ mvOsPrintf("ethWinOverlapDetect:\n
+ winNumIndex =%d baseHigh =0x%x baseLow=0x%x size=0x%x enable=0x%x\n",
+ winNumIndex,
+ addrDecWin.addrWin.baseHigh,
+ addrDecWin.addrWin.baseLow,
+ addrDecWin.addrWin.size,
+ addrDecWin.enable);
+*/
+ if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+ {
+ return MV_TRUE;
+ }
+ }
+ return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvEthAddrDecShow - Print the Etherent address decode map.
+*
+* DESCRIPTION:
+* This function print the Etherent address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+void mvEthPortAddrDecShow(int port)
+{
+ MV_ETH_DEC_WIN win;
+ int i;
+
+ mvOsOutput( "\n" );
+ mvOsOutput( "ETH %d:\n", port );
+ mvOsOutput( "----\n" );
+
+ for( i = 0; i < ETH_MAX_DECODE_WIN; i++ )
+ {
+ memset( &win, 0, sizeof(ETH_MAX_DECODE_WIN) );
+
+ mvOsOutput( "win%d - ", i );
+
+ if( mvEthWinGet(port, i, &win ) == MV_OK )
+ {
+ if( win.enable )
+ {
+ mvOsOutput( "%s base %08x, ",
+ mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+ mvOsOutput( "...." );
+ mvSizePrint( win.addrWin.size );
+
+ mvOsOutput( "\n" );
+ }
+ else
+ mvOsOutput( "disable\n" );
+ }
+ }
+ return;
+}
+
+void mvEthAddrDecShow(void)
+{
+ int port;
+
+ for(port=0; port<mvCtrlEthMaxPortGet(); port++)
+ {
+ if (MV_FALSE == mvCtrlPwrClckGet(ETH_GIG_UNIT_ID, port)) continue;
+
+ mvEthPortAddrDecShow(port);
+ }
+}
+
+
+void mvEthInit(void)
+{
+ MV_U32 port;
+
+ /* Power down all existing ports */
+ for(port=0; port<mvCtrlEthMaxPortGet(); port++)
+ {
+ if (MV_FALSE == mvCtrlPwrClckGet(ETH_GIG_UNIT_ID, port))
+ continue;
+
+ mvEthPortPowerUp(port);
+ mvEthWinInit(port);
+ }
+ mvEthHalInit();
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSysGbeh
+#define __INCmvSysGbeh
+
+#include "mvCommon.h"
+#include "eth/mvEth.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+#define ETH_WIN_BASE_REG(port, win) (MV_ETH_REG_BASE(port) + 0x200 + ((win)<<3))
+#define ETH_WIN_SIZE_REG(port, win) (MV_ETH_REG_BASE(port) + 0x204 + ((win)<<3))
+#define ETH_WIN_REMAP_REG(port, win) (MV_ETH_REG_BASE(port) + 0x280 + ((win)<<2))
+#define ETH_BASE_ADDR_ENABLE_REG(port) (MV_ETH_REG_BASE(port) + 0x290)
+#define ETH_ACCESS_PROTECT_REG(port) (MV_ETH_REG_BASE(port) + 0x294)
+
+/**** Address decode parameters ****/
+
+/* Ethernet Base Address Register bits */
+#define ETH_MAX_DECODE_WIN 6
+#define ETH_MAX_HIGH_ADDR_REMAP_WIN 4
+
+/* Ethernet Port Access Protect (EPAP) register */
+
+/* The target associated with this window*/
+#define ETH_WIN_TARGET_OFFS 0
+#define ETH_WIN_TARGET_MASK (0xf << ETH_WIN_TARGET_OFFS)
+/* The target attributes Associated with window */
+#define ETH_WIN_ATTR_OFFS 8
+#define ETH_WIN_ATTR_MASK (0xff << ETH_WIN_ATTR_OFFS)
+
+/* Ethernet Port Access Protect Register (EPAPR) */
+#define ETH_PROT_NO_ACCESS NO_ACCESS_ALLOWED
+#define ETH_PROT_READ_ONLY READ_ONLY
+#define ETH_PROT_FULL_ACCESS FULL_ACCESS
+#define ETH_PROT_WIN_OFFS(winNum) (2 * (winNum))
+#define ETH_PROT_WIN_MASK(winNum) (0x3 << ETH_PROT_WIN_OFFS(winNum))
+
+MV_STATUS mvEthWinInit (int port);
+MV_STATUS mvEthWinEnable(int port, MV_U32 winNum, MV_BOOL enable);
+MV_U32 mvEthWinTargetGet(int port, MV_TARGET target);
+MV_STATUS mvEthProtWinSet(MV_U32 portNo, MV_U32 winNum, MV_ACCESS_RIGHTS
+ access);
+
+void mvEthPortAddrDecShow(int port);
+
+MV_VOID mvEthAddrDecShow(MV_VOID);
+
+void mvEthInit(void);
+
+#endif
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "ctrlEnv/sys/mvSysPex.h"
+
+/* this structure describes the mapping between a Pex Window and a CPU target*/
+typedef struct _pexWinToTarget
+{
+ MV_TARGET target;
+ MV_BOOL enable;
+
+}PEX_WIN_TO_TARGET;
+
+/* this array is a priority array that define How Pex windows should be
+configured , We have only 6 Pex Windows that can be configured , but we
+have maximum of 9 CPU target windows ! the following array is a priority
+array where the lowest index has the highest priotiy and the highest
+index has the lowest priority of being cnfigured */
+
+MV_U32 pexDevBarPrioTable[] =
+{
+#if defined(MV_INCLUDE_DEVICE_CS0)
+ DEVICE_CS0,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS1)
+ DEVICE_CS1,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS2)
+ DEVICE_CS2,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS3)
+ DEVICE_CS3,
+#endif
+/*
+#if defined(MV_INCLUDE_DEVICE_CS4)
+ DEVICE_CS4,
+#endif
+*/
+ TBL_TERM
+};
+
+
+/* PEX Wins registers offsets are inconsecutive. This struct describes WIN */
+/* register offsets and its function where its is located. */
+/* Also, PEX address remap registers offsets are inconsecutive. This struct */
+/* describes address remap register offsets */
+typedef struct _pexWinRegInfo
+{
+ MV_U32 baseLowRegOffs;
+ MV_U32 baseHighRegOffs;
+ MV_U32 sizeRegOffs;
+ MV_U32 remapLowRegOffs;
+ MV_U32 remapHighRegOffs;
+
+}PEX_WIN_REG_INFO;
+
+static MV_STATUS pexWinOverlapDetect(MV_U32 pexIf, MV_U32 winNum,
+ MV_ADDR_WIN *pAddrWin);
+static MV_STATUS pexWinRegInfoGet(MV_U32 pexIf, MV_U32 winNum,
+ PEX_WIN_REG_INFO *pWinRegInfo);
+
+static MV_STATUS pexBarIsValid(MV_U32 baseLow, MV_U32 size);
+
+static MV_BOOL pexIsWinWithinBar(MV_U32 pexIf,MV_ADDR_WIN *pAddrWin);
+static MV_BOOL pexBarOverlapDetect(MV_U32 pexIf,MV_U32 barNum,
+ MV_ADDR_WIN *pAddrWin);
+const MV_8* pexBarNameGet( MV_U32 bar );
+
+
+/*******************************************************************************
+* mvPexInit - Initialize PEX interfaces
+*
+* DESCRIPTION:
+*
+* This function is responsible of intialization of the Pex Interface , It
+* configure the Pex Bars and Windows in the following manner:
+*
+* Assumptions :
+* Bar0 is always internal registers bar
+* Bar1 is always the DRAM bar
+* Bar2 is always the Device bar
+*
+* 1) Sets the Internal registers bar base by obtaining the base from
+* the CPU Interface
+* 2) Sets the DRAM bar base and size by getting the base and size from
+* the CPU Interface when the size is the sum of all enabled DRAM
+* chip selects and the base is the base of CS0 .
+* 3) Sets the Device bar base and size by getting these values from the
+* CPU Interface when the base is the base of the lowest base of the
+* Device chip selects, and the
+*
+*
+* INPUT:
+*
+* pexIf - PEX interface number.
+*
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM
+*
+*******************************************************************************/
+MV_STATUS mvPexInit(MV_U32 pexIf, MV_PEX_TYPE pexType)
+{
+ MV_U32 bar;
+ MV_U32 winNum;
+ MV_PEX_BAR pexBar;
+ MV_PEX_DEC_WIN pexWin;
+ MV_CPU_DEC_WIN addrDecWin;
+ MV_TARGET target;
+ MV_U32 pexCurrWin=0;
+ MV_U32 status;
+ /* default and exapntion rom
+ are always configured */
+
+#ifndef MV_DISABLE_PEX_DEVICE_BAR
+ MV_U32 winIndex;
+ MV_U32 maxBase=0, sizeOfMaxBase=0;
+ MV_U32 pexStartWindow;
+#endif
+
+ /* Parameter checking */
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexInit: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_BAD_PARAM;
+ }
+
+ /* Enabled CPU access to PCI-Express */
+ mvCpuIfEnablePex(pexIf, pexType);
+
+ /* Start with bars */
+ /* First disable all PEX bars*/
+ for (bar = 0; bar < PEX_MAX_BARS; bar++)
+ {
+ if (PEX_INTER_REGS_BAR != bar)
+ {
+ if (MV_OK != mvPexBarEnable(pexIf, bar, MV_FALSE))
+ {
+ mvOsPrintf("mvPexInit:mvPexBarEnable bar =%d failed \n",bar);
+ return MV_ERROR;
+ }
+
+ }
+
+ }
+
+ /* and disable all PEX target windows */
+ for (winNum = 0; winNum < PEX_MAX_TARGET_WIN - 2; winNum++)
+ {
+ if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_FALSE))
+ {
+ mvOsPrintf("mvPexInit:mvPexTargetWinEnable winNum =%d failed \n",
+ winNum);
+ return MV_ERROR;
+
+ }
+ }
+
+ /* Now, go through all bars*/
+
+
+
+/******************************************************************************/
+/* Internal registers bar */
+/******************************************************************************/
+ bar = PEX_INTER_REGS_BAR;
+
+ /* we only open the bar , no need to open windows for this bar */
+
+ /* first get the CS attribute from the CPU Interface */
+ if (MV_OK !=mvCpuIfTargetWinGet(INTER_REGS,&addrDecWin))
+ {
+ mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",INTER_REGS);
+ return MV_ERROR;
+ }
+
+ pexBar.addrWin.baseHigh = addrDecWin.addrWin.baseHigh;
+ pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow;
+ pexBar.addrWin.size = addrDecWin.addrWin.size;
+ pexBar.enable = MV_TRUE;
+
+ if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar))
+ {
+ mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar);
+ return MV_ERROR;
+ }
+
+/******************************************************************************/
+/* DRAM bar */
+/******************************************************************************/
+
+ bar = PEX_DRAM_BAR;
+
+ pexBar.addrWin.size = 0;
+
+ for (target = SDRAM_CS0;target < MV_DRAM_MAX_CS; target++ )
+ {
+
+ status = mvCpuIfTargetWinGet(target,&addrDecWin);
+
+ if((MV_NO_SUCH == status)&&(target != SDRAM_CS0))
+ {
+ continue;
+ }
+
+ /* first get attributes from CPU If */
+ if (MV_OK != status)
+ {
+ mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",target);
+ return MV_ERROR;
+ }
+ if (addrDecWin.enable == MV_TRUE)
+ {
+ /* the base is the base of DRAM CS0 always */
+ if (SDRAM_CS0 == target )
+ {
+ pexBar.addrWin.baseHigh = addrDecWin.addrWin.baseHigh;
+ pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow;
+
+ }
+
+ /* increment the bar size to be the sum of the size of all
+ DRAM chips selecs */
+ pexBar.addrWin.size += addrDecWin.addrWin.size;
+
+ /* set a Pex window for this target !
+ DRAM CS always will have a Pex Window , and is not a
+ part of the priority table */
+ pexWin.addrWin.baseHigh = addrDecWin.addrWin.baseHigh;
+ pexWin.addrWin.baseLow = addrDecWin.addrWin.baseLow;
+ pexWin.addrWin.size = addrDecWin.addrWin.size;
+
+ /* we disable the windows at first because we are not
+ sure that it is witihin bar boundries */
+ pexWin.enable =MV_FALSE;
+ pexWin.target = target;
+ pexWin.targetBar = bar;
+
+ if (MV_OK != mvPexTargetWinSet(pexIf,pexCurrWin++,&pexWin))
+ {
+ mvOsPrintf("mvPexInit: ERR. mvPexTargetWinSet failed\n");
+ return MV_ERROR;
+ }
+ }
+ }
+
+ /* check if the size of the bar is illeggal */
+ if (-1 == ctrlSizeToReg(pexBar.addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT))
+ {
+ /* try to get a good size */
+ pexBar.addrWin.size = ctrlSizeRegRoundUp(pexBar.addrWin.size,
+ PXBCR_BAR_SIZE_ALIGNMENT);
+ }
+
+ /* check if the size and base are valid */
+ if (MV_TRUE == pexBarOverlapDetect(pexIf,bar,&pexBar.addrWin))
+ {
+ mvOsPrintf("mvPexInit:Warning :Bar %d size is illigal\n",bar);
+ mvOsPrintf("it will be disabled\n");
+ mvOsPrintf("please check Pex and CPU windows configuration\n");
+ }
+ else
+ {
+ pexBar.enable = MV_TRUE;
+
+ /* configure the bar */
+ if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar))
+ {
+ mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar);
+ return MV_ERROR;
+ }
+
+ /* after the bar was configured then we enable the Pex windows*/
+ for (winNum = 0;winNum < pexCurrWin ;winNum++)
+ {
+ if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_TRUE))
+ {
+ mvOsPrintf("mvPexInit: Can't enable window =%d\n",winNum);
+ return MV_ERROR;
+ }
+
+ }
+ }
+
+/******************************************************************************/
+/* DEVICE bar */
+/******************************************************************************/
+
+/* Open the Device BAR for non linux only */
+#ifndef MV_DISABLE_PEX_DEVICE_BAR
+
+ /* then device bar*/
+ bar = PEX_DEVICE_BAR;
+
+ /* save the starting window */
+ pexStartWindow = pexCurrWin;
+ pexBar.addrWin.size = 0;
+ pexBar.addrWin.baseLow = 0xffffffff;
+ pexBar.addrWin.baseHigh = 0;
+ maxBase = 0;
+
+ for (target = DEV_TO_TARGET(START_DEV_CS);target < DEV_TO_TARGET(MV_DEV_MAX_CS); target++ )
+ {
+ status = mvCpuIfTargetWinGet(target,&addrDecWin);
+
+ if (MV_NO_SUCH == status)
+ {
+ continue;
+ }
+
+ if (MV_OK != status)
+ {
+ mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",target);
+ return MV_ERROR;
+ }
+
+ if (addrDecWin.enable == MV_TRUE)
+ {
+ /* get the minimum base */
+ if (addrDecWin.addrWin.baseLow < pexBar.addrWin.baseLow)
+ {
+ pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow;
+ }
+
+ /* get the maximum base */
+ if (addrDecWin.addrWin.baseLow > maxBase)
+ {
+ maxBase = addrDecWin.addrWin.baseLow;
+ sizeOfMaxBase = addrDecWin.addrWin.size;
+ }
+
+ /* search in the priority table for this target */
+ for (winIndex = 0; pexDevBarPrioTable[winIndex] != TBL_TERM;
+ winIndex++)
+ {
+ if (pexDevBarPrioTable[winIndex] != target)
+ {
+ continue;
+ }
+ else if (pexDevBarPrioTable[winIndex] == target)
+ {
+ /*found it */
+
+ /* if the index of this target in the prio table is valid
+ then we set the Pex window for this target, a valid index is
+ an index that is lower than the number of the windows that
+ was not configured yet */
+
+ /* we subtract 2 always because the default and expantion
+ rom windows are always configured */
+ if ( pexCurrWin < PEX_MAX_TARGET_WIN - 2)
+ {
+ /* set a Pex window for this target ! */
+ pexWin.addrWin.baseHigh = addrDecWin.addrWin.baseHigh;
+ pexWin.addrWin.baseLow = addrDecWin.addrWin.baseLow;
+ pexWin.addrWin.size = addrDecWin.addrWin.size;
+
+ /* we disable the windows at first because we are not
+ sure that it is witihin bar boundries */
+ pexWin.enable = MV_FALSE;
+ pexWin.target = target;
+ pexWin.targetBar = bar;
+
+ if (MV_OK != mvPexTargetWinSet(pexIf,pexCurrWin++,
+ &pexWin))
+ {
+ mvOsPrintf("mvPexInit: ERR. Window Set failed\n");
+ return MV_ERROR;
+ }
+ }
+ }
+ }
+ }
+ }
+
+ pexBar.addrWin.size = maxBase - pexBar.addrWin.baseLow + sizeOfMaxBase;
+ pexBar.enable = MV_TRUE;
+
+ /* check if the size of the bar is illegal */
+ if (-1 == ctrlSizeToReg(pexBar.addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT))
+ {
+ /* try to get a good size */
+ pexBar.addrWin.size = ctrlSizeRegRoundUp(pexBar.addrWin.size,
+ PXBCR_BAR_SIZE_ALIGNMENT);
+ }
+
+ /* check if the size and base are valid */
+ if (MV_TRUE == pexBarOverlapDetect(pexIf,bar,&pexBar.addrWin))
+ {
+ mvOsPrintf("mvPexInit:Warning :Bar %d size is illigal\n",bar);
+ mvOsPrintf("it will be disabled\n");
+ mvOsPrintf("please check Pex and CPU windows configuration\n");
+ }
+ else
+ {
+ if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar))
+ {
+ mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar);
+ return MV_ERROR;
+ }
+
+ /* now enable the windows */
+ for (winNum = pexStartWindow; winNum < pexCurrWin ; winNum++)
+ {
+ if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_TRUE))
+ {
+ mvOsPrintf("mvPexInit:mvPexTargetWinEnable winNum =%d failed \n",
+ winNum);
+ return MV_ERROR;
+ }
+ }
+ }
+
+#endif
+
+ return mvPexHalInit(pexIf, pexType);
+
+}
+
+/*******************************************************************************
+* mvPexTargetWinSet - Set PEX to peripheral target address window BAR
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* N/A
+*
+* RETURN:
+* MV_OK if PEX BAR target window was set correctly,
+* MV_BAD_PARAM on bad params
+* MV_ERROR otherwise
+* (e.g. address window overlapps with other active PEX target window).
+*
+*******************************************************************************/
+MV_STATUS mvPexTargetWinSet(MV_U32 pexIf, MV_U32 winNum,
+ MV_PEX_DEC_WIN *pAddrDecWin)
+{
+
+ MV_DEC_REGS decRegs;
+ PEX_WIN_REG_INFO winRegInfo;
+ MV_TARGET_ATTRIB targetAttribs;
+
+ /* Parameter checking */
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexTargetWinSet: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_BAD_PARAM;
+ }
+
+ if (winNum >= PEX_MAX_TARGET_WIN)
+ {
+ mvOsPrintf("mvPexTargetWinSet: ERR. Invalid PEX winNum %d\n", winNum);
+ return MV_BAD_PARAM;
+
+ }
+
+ /* get the pex Window registers offsets */
+ pexWinRegInfoGet(pexIf,winNum,&winRegInfo);
+
+
+ if (MV_TRUE == pAddrDecWin->enable)
+ {
+
+ /* 2) Check if the requested window overlaps with current windows */
+ if (MV_TRUE == pexWinOverlapDetect(pexIf,winNum, &pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("mvPexTargetWinSet: ERR. Target %d overlap\n", winNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* 2) Check if the requested window overlaps with current windows */
+ if (MV_FALSE == pexIsWinWithinBar(pexIf,&pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("mvPexTargetWinSet: Win %d should be in bar boundries\n",
+ winNum);
+ return MV_BAD_PARAM;
+ }
+
+ }
+
+
+
+ /* read base register*/
+
+ if (winRegInfo.baseLowRegOffs)
+ {
+ decRegs.baseReg = MV_REG_READ(winRegInfo.baseLowRegOffs);
+ }
+ else
+ {
+ decRegs.baseReg = 0;
+ }
+
+ if (winRegInfo.sizeRegOffs)
+ {
+ decRegs.sizeReg = MV_REG_READ(winRegInfo.sizeRegOffs);
+ }
+ else
+ {
+ decRegs.sizeReg =0;
+ }
+
+ if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+ {
+ mvOsPrintf("mvPexTargetWinSet:mvCtrlAddrDecToReg Failed\n");
+ return MV_ERROR;
+ }
+
+ /* enable\Disable */
+ if (MV_TRUE == pAddrDecWin->enable)
+ {
+ decRegs.sizeReg |= PXWCR_WIN_EN;
+ }
+ else
+ {
+ decRegs.sizeReg &= ~PXWCR_WIN_EN;
+ }
+
+
+ /* clear bit location */
+ decRegs.sizeReg &= ~PXWCR_WIN_BAR_MAP_MASK;
+
+ /* set bar Mapping */
+ if (pAddrDecWin->targetBar == 1)
+ {
+ decRegs.sizeReg |= PXWCR_WIN_BAR_MAP_BAR1;
+ }
+ else if (pAddrDecWin->targetBar == 2)
+ {
+ decRegs.sizeReg |= PXWCR_WIN_BAR_MAP_BAR2;
+ }
+
+ mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs);
+
+ /* set attributes */
+ decRegs.sizeReg &= ~PXWCR_ATTRIB_MASK;
+ decRegs.sizeReg |= targetAttribs.attrib << PXWCR_ATTRIB_OFFS;
+ /* set target ID */
+ decRegs.sizeReg &= ~PXWCR_TARGET_MASK;
+ decRegs.sizeReg |= targetAttribs.targetId << PXWCR_TARGET_OFFS;
+
+
+ /* 3) Write to address decode Base Address Register */
+
+ if (winRegInfo.baseLowRegOffs)
+ {
+ MV_REG_WRITE(winRegInfo.baseLowRegOffs, decRegs.baseReg);
+ }
+
+ /* write size reg */
+ if (winRegInfo.sizeRegOffs)
+ {
+ if ((MV_PEX_WIN_DEFAULT == winNum)||
+ (MV_PEX_WIN_EXP_ROM == winNum))
+ {
+ /* clear size because there is no size field*/
+ decRegs.sizeReg &= ~PXWCR_SIZE_MASK;
+
+ /* clear enable because there is no enable field*/
+ decRegs.sizeReg &= ~PXWCR_WIN_EN;
+
+ }
+
+ MV_REG_WRITE(winRegInfo.sizeRegOffs, decRegs.sizeReg);
+ }
+
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvPexTargetWinGet - Get PEX to peripheral target address window
+*
+* DESCRIPTION:
+* Get the PEX to peripheral target address window BAR.
+*
+* INPUT:
+* pexIf - PEX interface number.
+* bar - BAR to be accessed by slave.
+*
+* OUTPUT:
+* pAddrBarWin - PEX target window information data structure.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexTargetWinGet(MV_U32 pexIf, MV_U32 winNum,
+ MV_PEX_DEC_WIN *pAddrDecWin)
+{
+ MV_TARGET_ATTRIB targetAttrib;
+ MV_DEC_REGS decRegs;
+
+ PEX_WIN_REG_INFO winRegInfo;
+
+ /* Parameter checking */
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexTargetWinGet: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_BAD_PARAM;
+ }
+
+ if (winNum >= PEX_MAX_TARGET_WIN)
+ {
+ mvOsPrintf("mvPexTargetWinGet: ERR. Invalid PEX winNum %d\n", winNum);
+ return MV_BAD_PARAM;
+
+ }
+
+ /* get the pex Window registers offsets */
+ pexWinRegInfoGet(pexIf,winNum,&winRegInfo);
+
+ /* read base register*/
+ if (winRegInfo.baseLowRegOffs)
+ {
+ decRegs.baseReg = MV_REG_READ(winRegInfo.baseLowRegOffs);
+ }
+ else
+ {
+ decRegs.baseReg = 0;
+ }
+
+ /* read size reg */
+ if (winRegInfo.sizeRegOffs)
+ {
+ decRegs.sizeReg = MV_REG_READ(winRegInfo.sizeRegOffs);
+ }
+ else
+ {
+ decRegs.sizeReg =0;
+ }
+
+ if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin)))
+ {
+ mvOsPrintf("mvPexTargetWinGet: mvCtrlRegToAddrDec Failed \n");
+ return MV_ERROR;
+
+ }
+
+ if (decRegs.sizeReg & PXWCR_WIN_EN)
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrDecWin->enable = MV_FALSE;
+
+ }
+
+
+ #if 0
+ if (-1 == pAddrDecWin->addrWin.size)
+ {
+ return MV_ERROR;
+ }
+ #endif
+
+
+ /* get target bar */
+ if ((decRegs.sizeReg & PXWCR_WIN_BAR_MAP_MASK) == PXWCR_WIN_BAR_MAP_BAR1 )
+ {
+ pAddrDecWin->targetBar = 1;
+ }
+ else if ((decRegs.sizeReg & PXWCR_WIN_BAR_MAP_MASK) ==
+ PXWCR_WIN_BAR_MAP_BAR2 )
+ {
+ pAddrDecWin->targetBar = 2;
+ }
+
+ /* attrib and targetId */
+ pAddrDecWin->attrib = (decRegs.sizeReg & PXWCR_ATTRIB_MASK) >>
+ PXWCR_ATTRIB_OFFS;
+ pAddrDecWin->targetId = (decRegs.sizeReg & PXWCR_TARGET_MASK) >>
+ PXWCR_TARGET_OFFS;
+
+ targetAttrib.attrib = pAddrDecWin->attrib;
+ targetAttrib.targetId = pAddrDecWin->targetId;
+
+ pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+ return MV_OK;
+
+}
+
+
+/*******************************************************************************
+* mvPexTargetWinEnable - Enable/disable a PEX BAR window
+*
+* DESCRIPTION:
+* This function enable/disable a PEX BAR window.
+* if parameter 'enable' == MV_TRUE the routine will enable the
+* window, thus enabling PEX accesses for that BAR (before enabling the
+* window it is tested for overlapping). Otherwise, the window will
+* be disabled.
+*
+* INPUT:
+* pexIf - PEX interface number.
+* bar - BAR to be accessed by slave.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexTargetWinEnable(MV_U32 pexIf,MV_U32 winNum, MV_BOOL enable)
+{
+ PEX_WIN_REG_INFO winRegInfo;
+ MV_PEX_DEC_WIN addrDecWin;
+
+ /* Parameter checking */
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexTargetWinEnable: ERR. Invalid PEX If %d\n", pexIf);
+ return MV_BAD_PARAM;
+ }
+
+ if (winNum >= PEX_MAX_TARGET_WIN)
+ {
+ mvOsPrintf("mvPexTargetWinEnable ERR. Invalid PEX winNum %d\n", winNum);
+ return MV_BAD_PARAM;
+
+ }
+
+
+ /* get the pex Window registers offsets */
+ pexWinRegInfoGet(pexIf,winNum,&winRegInfo);
+
+
+ /* if the address windows is disabled , we only disable the appropriare
+ pex window and ignore other settings */
+
+ if (MV_FALSE == enable)
+ {
+
+ /* this is not relevant to default and expantion rom
+ windows */
+ if (winRegInfo.sizeRegOffs)
+ {
+ if ((MV_PEX_WIN_DEFAULT != winNum)&&
+ (MV_PEX_WIN_EXP_ROM != winNum))
+ {
+ MV_REG_BIT_RESET(winRegInfo.sizeRegOffs, PXWCR_WIN_EN);
+ }
+ }
+
+ }
+ else
+ {
+ if (MV_OK != mvPexTargetWinGet(pexIf,winNum, &addrDecWin))
+ {
+ mvOsPrintf("mvPexTargetWinEnable: mvPexTargetWinGet Failed\n");
+ return MV_ERROR;
+ }
+
+ /* Check if the requested window overlaps with current windows */
+ if (MV_TRUE == pexWinOverlapDetect(pexIf,winNum, &addrDecWin.addrWin))
+ {
+ mvOsPrintf("mvPexTargetWinEnable: ERR. Target %d overlap\n", winNum);
+ return MV_BAD_PARAM;
+ }
+
+ if (MV_FALSE == pexIsWinWithinBar(pexIf,&addrDecWin.addrWin))
+ {
+ mvOsPrintf("mvPexTargetWinEnable: Win %d should be in bar boundries\n",
+ winNum);
+ return MV_BAD_PARAM;
+ }
+
+
+ /* this is not relevant to default and expantion rom
+ windows */
+ if (winRegInfo.sizeRegOffs)
+ {
+ if ((MV_PEX_WIN_DEFAULT != winNum)&&
+ (MV_PEX_WIN_EXP_ROM != winNum))
+ {
+ MV_REG_BIT_SET(winRegInfo.sizeRegOffs, PXWCR_WIN_EN);
+ }
+ }
+
+
+ }
+
+ return MV_OK;
+
+}
+
+
+
+/*******************************************************************************
+* mvPexTargetWinRemap - Set PEX to target address window remap.
+*
+* DESCRIPTION:
+* The PEX interface supports remap of the BAR original address window.
+* For each BAR it is possible to define a remap address. For example
+* an address 0x12345678 that hits BAR 0x10 (SDRAM CS[0]) will be modified
+* according to remap register but will also be targeted to the
+* SDRAM CS[0].
+*
+* INPUT:
+* pexIf - PEX interface number.
+* bar - Peripheral target enumerator accessed by slave.
+* pAddrWin - Address window to be checked.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexTargetWinRemap(MV_U32 pexIf, MV_U32 winNum,
+ MV_PEX_REMAP_WIN *pAddrWin)
+{
+
+ PEX_WIN_REG_INFO winRegInfo;
+
+ /* Parameter checking */
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX interface num %d\n",
+ pexIf);
+ return MV_BAD_PARAM;
+ }
+ if (MV_PEX_WIN_DEFAULT == winNum)
+ {
+ mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX win num %d\n",
+ winNum);
+ return MV_BAD_PARAM;
+
+ }
+
+ if (MV_IS_NOT_ALIGN(pAddrWin->addrWin.baseLow, PXWRR_REMAP_ALIGNMENT))
+ {
+ mvOsPrintf("mvPexTargetWinRemap: Error remap PEX interface %d win %d."\
+ "\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ pexIf,
+ winNum,
+ pAddrWin->addrWin.baseLow,
+ pAddrWin->addrWin.size);
+
+ return MV_ERROR;
+ }
+
+ pexWinRegInfoGet(pexIf, winNum, &winRegInfo);
+
+ /* Set remap low register value */
+ MV_REG_WRITE(winRegInfo.remapLowRegOffs, pAddrWin->addrWin.baseLow);
+
+ /* Skip base high settings if the BAR has only base low (32-bit) */
+ if (0 != winRegInfo.remapHighRegOffs)
+ {
+ MV_REG_WRITE(winRegInfo.remapHighRegOffs, pAddrWin->addrWin.baseHigh);
+ }
+
+
+ if (pAddrWin->enable == MV_TRUE)
+ {
+ MV_REG_BIT_SET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN);
+ }
+ else
+ {
+ MV_REG_BIT_RESET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN);
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvPexTargetWinRemapEnable -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+
+MV_STATUS mvPexTargetWinRemapEnable(MV_U32 pexIf, MV_U32 winNum,
+ MV_BOOL enable)
+{
+ PEX_WIN_REG_INFO winRegInfo;
+
+ /* Parameter checking */
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX interface num %d\n",
+ pexIf);
+ return MV_BAD_PARAM;
+ }
+ if (MV_PEX_WIN_DEFAULT == winNum)
+ {
+ mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX win num %d\n",
+ winNum);
+ return MV_BAD_PARAM;
+
+ }
+
+
+ pexWinRegInfoGet(pexIf, winNum, &winRegInfo);
+
+ if (enable == MV_TRUE)
+ {
+ MV_REG_BIT_SET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN);
+ }
+ else
+ {
+ MV_REG_BIT_RESET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN);
+ }
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvPexBarSet - Set PEX bar address and size
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexBarSet(MV_U32 pexIf,
+ MV_U32 barNum,
+ MV_PEX_BAR *pAddrWin)
+{
+ MV_U32 regBaseLow;
+ MV_U32 regSize,sizeToReg;
+
+
+ /* check parameters */
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexBarSet: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_BAD_PARAM;
+ }
+
+ if(barNum >= PEX_MAX_BARS)
+ {
+ mvOsPrintf("mvPexBarSet: ERR. Invalid bar number %d\n", barNum);
+ return MV_BAD_PARAM;
+ }
+
+
+ if (pAddrWin->addrWin.size == 0)
+ {
+ mvOsPrintf("mvPexBarSet: Size zero is Illigal\n" );
+ return MV_BAD_PARAM;
+ }
+
+
+ /* Check if the window complies with PEX spec */
+ if (MV_TRUE != pexBarIsValid(pAddrWin->addrWin.baseLow,
+ pAddrWin->addrWin.size))
+ {
+ mvOsPrintf("mvPexBarSet: ERR. Target %d window invalid\n", barNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* 2) Check if the requested bar overlaps with current bars */
+ if (MV_TRUE == pexBarOverlapDetect(pexIf,barNum, &pAddrWin->addrWin))
+ {
+ mvOsPrintf("mvPexBarSet: ERR. Target %d overlap\n", barNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* Get size register value according to window size */
+ sizeToReg = ctrlSizeToReg(pAddrWin->addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT);
+
+ /* Read bar size */
+ if (PEX_INTER_REGS_BAR != barNum) /* internal registers have no size */
+ {
+ regSize = MV_REG_READ(PEX_BAR_CTRL_REG(pexIf,barNum));
+
+ /* Size parameter validity check. */
+ if (-1 == sizeToReg)
+ {
+ mvOsPrintf("mvPexBarSet: ERR. Target BAR %d size invalid.\n",barNum);
+ return MV_BAD_PARAM;
+ }
+
+ regSize &= ~PXBCR_BAR_SIZE_MASK;
+ regSize |= (sizeToReg << PXBCR_BAR_SIZE_OFFS) ;
+
+ MV_REG_WRITE(PEX_BAR_CTRL_REG(pexIf,barNum),regSize);
+
+ }
+
+ /* set size */
+
+
+
+ /* Read base address low */
+ regBaseLow = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,
+ PEX_MV_BAR_BASE(barNum)));
+
+ /* clear current base */
+ if (PEX_INTER_REGS_BAR == barNum)
+ {
+ regBaseLow &= ~PXBIR_BASE_MASK;
+ regBaseLow |= (pAddrWin->addrWin.baseLow & PXBIR_BASE_MASK);
+ }
+ else
+ {
+ regBaseLow &= ~PXBR_BASE_MASK;
+ regBaseLow |= (pAddrWin->addrWin.baseLow & PXBR_BASE_MASK);
+ }
+
+ /* if we had a previous value that contain the bar type (MeM\IO), we want to
+ restore it */
+ regBaseLow |= PEX_BAR_DEFAULT_ATTRIB;
+
+
+
+ /* write base low */
+ MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE(barNum)),
+ regBaseLow);
+
+ if (pAddrWin->addrWin.baseHigh != 0)
+ {
+ /* Read base address high */
+ MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE_HIGH(barNum)),
+ pAddrWin->addrWin.baseHigh);
+
+ }
+
+ /* lastly enable the Bar */
+ if (pAddrWin->enable == MV_TRUE)
+ {
+ if (PEX_INTER_REGS_BAR != barNum) /* internal registers
+ are enabled always */
+ {
+ MV_REG_BIT_SET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN);
+ }
+ }
+ else if (MV_FALSE == pAddrWin->enable)
+ {
+ if (PEX_INTER_REGS_BAR != barNum) /* internal registers
+ are enabled always */
+ {
+ MV_REG_BIT_RESET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN);
+ }
+
+ }
+
+
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPexBarGet - Get PEX bar address and size
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+
+MV_STATUS mvPexBarGet(MV_U32 pexIf,
+ MV_U32 barNum,
+ MV_PEX_BAR *pAddrWin)
+{
+ /* check parameters */
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexBarGet: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_BAD_PARAM;
+ }
+
+ if(barNum >= PEX_MAX_BARS)
+ {
+ mvOsPrintf("mvPexBarGet: ERR. Invalid bar number %d\n", barNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* read base low */
+ pAddrWin->addrWin.baseLow =
+ MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE(barNum)));
+
+
+ if (PEX_INTER_REGS_BAR == barNum)
+ {
+ pAddrWin->addrWin.baseLow &= PXBIR_BASE_MASK;
+ }
+ else
+ {
+ pAddrWin->addrWin.baseLow &= PXBR_BASE_MASK;
+ }
+
+
+ /* read base high */
+ pAddrWin->addrWin.baseHigh =
+ MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE_HIGH(barNum)));
+
+
+ /* Read bar size */
+ if (PEX_INTER_REGS_BAR != barNum) /* internal registers have no size */
+ {
+ pAddrWin->addrWin.size = MV_REG_READ(PEX_BAR_CTRL_REG(pexIf,barNum));
+
+ /* check if enable or not */
+ if (pAddrWin->addrWin.size & PXBCR_BAR_EN)
+ {
+ pAddrWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrWin->enable = MV_FALSE;
+ }
+
+ /* now get the size */
+ pAddrWin->addrWin.size &= PXBCR_BAR_SIZE_MASK;
+ pAddrWin->addrWin.size >>= PXBCR_BAR_SIZE_OFFS;
+
+ pAddrWin->addrWin.size = ctrlRegToSize(pAddrWin->addrWin.size,
+ PXBCR_BAR_SIZE_ALIGNMENT);
+
+ }
+ else /* PEX_INTER_REGS_BAR */
+ {
+ pAddrWin->addrWin.size = INTER_REGS_SIZE;
+ pAddrWin->enable = MV_TRUE;
+ }
+
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvPexBarEnable -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+
+
+MV_STATUS mvPexBarEnable(MV_U32 pexIf, MV_U32 barNum, MV_BOOL enable)
+{
+
+ MV_PEX_BAR pexBar;
+
+ /* check parameters */
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexBarEnable: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_BAD_PARAM;
+ }
+
+
+ if(barNum >= PEX_MAX_BARS)
+ {
+ mvOsPrintf("mvPexBarEnable: ERR. Invalid bar number %d\n", barNum);
+ return MV_BAD_PARAM;
+ }
+
+ if (PEX_INTER_REGS_BAR == barNum)
+ {
+ if (MV_TRUE == enable)
+ {
+ return MV_OK;
+ }
+ else
+ {
+ return MV_ERROR;
+ }
+ }
+
+
+ if (MV_FALSE == enable)
+ {
+ /* disable bar and quit */
+ MV_REG_BIT_RESET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN);
+ return MV_OK;
+ }
+
+ /* else */
+
+ if (mvPexBarGet(pexIf,barNum,&pexBar) != MV_OK)
+ {
+ mvOsPrintf("mvPexBarEnable: mvPexBarGet Failed\n");
+ return MV_ERROR;
+
+ }
+
+ if (MV_TRUE == pexBar.enable)
+ {
+ /* it is already enabled !!! */
+ return MV_OK;
+ }
+
+ /* else enable the bar*/
+
+ pexBar.enable = MV_TRUE;
+
+ if (mvPexBarSet(pexIf,barNum,&pexBar) != MV_OK)
+ {
+ mvOsPrintf("mvPexBarEnable: mvPexBarSet Failed\n");
+ return MV_ERROR;
+
+ }
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* pexWinOverlapDetect - Detect address windows overlapping
+*
+* DESCRIPTION:
+* This function detects address window overlapping of a given address
+* window in PEX BARs.
+*
+* INPUT:
+* pAddrWin - Address window to be checked.
+* bar - BAR to be accessed by slave.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlap current address
+* decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL pexWinOverlapDetect(MV_U32 pexIf,
+ MV_U32 winNum,
+ MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 win;
+ MV_PEX_DEC_WIN addrDecWin;
+
+
+ for(win = 0; win < PEX_MAX_TARGET_WIN -2 ; win++)
+ {
+ /* don't check our target or illegal targets */
+ if (winNum == win)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvPexTargetWinGet(pexIf, win, &addrDecWin))
+ {
+ mvOsPrintf("pexWinOverlapDetect: ERR. TargetWinGet failed win=%x\n",
+ win);
+ return MV_ERROR;
+ }
+
+ /* Do not check disabled windows */
+ if (MV_FALSE == addrDecWin.enable)
+ {
+ continue;
+ }
+
+
+ if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin))
+ {
+ mvOsPrintf("pexWinOverlapDetect: winNum %d overlap current %d\n",
+ winNum, win);
+ return MV_TRUE;
+ }
+ }
+
+ return MV_FALSE;
+}
+
+/*******************************************************************************
+* pexIsWinWithinBar - Detect if address is within PEX bar boundries
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlap current address
+* decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL pexIsWinWithinBar(MV_U32 pexIf,
+ MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 bar;
+ MV_PEX_BAR addrDecWin;
+
+ for(bar = 0; bar < PEX_MAX_BARS; bar++)
+ {
+
+ /* Get window parameters */
+ if (MV_OK != mvPexBarGet(pexIf, bar, &addrDecWin))
+ {
+ mvOsPrintf("pexIsWinWithinBar: ERR. mvPexBarGet failed\n");
+ return MV_ERROR;
+ }
+
+ /* Do not check disabled bars */
+ if (MV_FALSE == addrDecWin.enable)
+ {
+ continue;
+ }
+
+
+ if(MV_TRUE == ctrlWinWithinWinTest(pAddrWin, &addrDecWin.addrWin))
+ {
+ return MV_TRUE;
+ }
+ }
+
+ return MV_FALSE;
+
+}
+
+/*******************************************************************************
+* pexBarOverlapDetect - Detect address windows overlapping
+*
+* DESCRIPTION:
+* This function detects address window overlapping of a given address
+* window in PEX BARs.
+*
+* INPUT:
+* pAddrWin - Address window to be checked.
+* bar - BAR to be accessed by slave.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlap current address
+* decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL pexBarOverlapDetect(MV_U32 pexIf,
+ MV_U32 barNum,
+ MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 bar;
+ MV_PEX_BAR barDecWin;
+
+
+ for(bar = 0; bar < PEX_MAX_BARS; bar++)
+ {
+ /* don't check our target or illegal targets */
+ if (barNum == bar)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvPexBarGet(pexIf, bar, &barDecWin))
+ {
+ mvOsPrintf("pexBarOverlapDetect: ERR. TargetWinGet failed\n");
+ return MV_ERROR;
+ }
+
+ /* don'nt check disabled bars */
+ if (barDecWin.enable == MV_FALSE)
+ {
+ continue;
+ }
+
+
+ if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &barDecWin.addrWin))
+ {
+ mvOsPrintf("pexBarOverlapDetect: winNum %d overlap current %d\n",
+ barNum, bar);
+ return MV_TRUE;
+ }
+ }
+
+ return MV_FALSE;
+}
+
+/*******************************************************************************
+* pexBarIsValid - Check if the given address window is valid
+*
+* DESCRIPTION:
+* PEX spec restrict BAR base to be aligned to BAR size.
+* This function checks if the given address window is valid.
+*
+* INPUT:
+* baseLow - 32bit low base address.
+* size - Window size.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the address window is valid, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_STATUS pexBarIsValid(MV_U32 baseLow, MV_U32 size)
+{
+
+ /* PCI spec restrict BAR base to be aligned to BAR size */
+ if(MV_IS_NOT_ALIGN(baseLow, size))
+ {
+ return MV_ERROR;
+ }
+ else
+ {
+ return MV_TRUE;
+ }
+
+ return MV_TRUE;
+}
+
+/*******************************************************************************
+* pexBarRegInfoGet - Get BAR register information
+*
+* DESCRIPTION:
+* PEX BARs registers offsets are inconsecutive.
+* This function gets a PEX BAR register information like register offsets
+* and function location of the BAR.
+*
+* INPUT:
+* pexIf - PEX interface number.
+* bar - The PEX BAR in question.
+*
+* OUTPUT:
+* pBarRegInfo - BAR register info struct.
+*
+* RETURN:
+* MV_BAD_PARAM when bad parameters ,MV_ERROR on error ,othewise MV_OK
+*
+*******************************************************************************/
+static MV_STATUS pexWinRegInfoGet(MV_U32 pexIf,
+ MV_U32 winNum,
+ PEX_WIN_REG_INFO *pWinRegInfo)
+{
+
+ if ((winNum >= 0)&&(winNum <=3))
+ {
+ pWinRegInfo->baseLowRegOffs = PEX_WIN0_3_BASE_REG(pexIf,winNum);
+ pWinRegInfo->baseHighRegOffs = 0;
+ pWinRegInfo->sizeRegOffs = PEX_WIN0_3_CTRL_REG(pexIf,winNum);
+ pWinRegInfo->remapLowRegOffs = PEX_WIN0_3_REMAP_REG(pexIf,winNum);
+ pWinRegInfo->remapHighRegOffs = 0;
+ }
+ else if ((winNum >= 4)&&(winNum <=5))
+ {
+ pWinRegInfo->baseLowRegOffs = PEX_WIN4_5_BASE_REG(pexIf,winNum);
+ pWinRegInfo->baseHighRegOffs = 0;
+ pWinRegInfo->sizeRegOffs = PEX_WIN4_5_CTRL_REG(pexIf,winNum);
+ pWinRegInfo->remapLowRegOffs = PEX_WIN4_5_REMAP_REG(pexIf,winNum);
+ pWinRegInfo->remapHighRegOffs = PEX_WIN4_5_REMAP_HIGH_REG(pexIf,winNum);
+
+ }
+ else if (MV_PEX_WIN_DEFAULT == winNum)
+ {
+ pWinRegInfo->baseLowRegOffs = 0;
+ pWinRegInfo->baseHighRegOffs = 0;
+ pWinRegInfo->sizeRegOffs = PEX_WIN_DEFAULT_CTRL_REG(pexIf);
+ pWinRegInfo->remapLowRegOffs = 0;
+ pWinRegInfo->remapHighRegOffs = 0;
+ }
+ else if (MV_PEX_WIN_EXP_ROM == winNum)
+ {
+ pWinRegInfo->baseLowRegOffs = 0;
+ pWinRegInfo->baseHighRegOffs = 0;
+ pWinRegInfo->sizeRegOffs = PEX_WIN_EXP_ROM_CTRL_REG(pexIf);
+ pWinRegInfo->remapLowRegOffs = PEX_WIN_EXP_ROM_REMAP_REG(pexIf);
+ pWinRegInfo->remapHighRegOffs = 0;
+
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* pexBarNameGet - Get the string name of PEX BAR.
+*
+* DESCRIPTION:
+* This function get the string name of PEX BAR.
+*
+* INPUT:
+* bar - PEX bar number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* pointer to the string name of PEX BAR.
+*
+*******************************************************************************/
+const MV_8* pexBarNameGet( MV_U32 bar )
+{
+ switch( bar )
+ {
+ case PEX_INTER_REGS_BAR:
+ return "Internal Regs Bar0....";
+ case PEX_DRAM_BAR:
+ return "DRAM Bar1.............";
+ case PEX_DEVICE_BAR:
+ return "Devices Bar2..........";
+ default:
+ return "Bar unknown";
+ }
+}
+/*******************************************************************************
+* mvPexAddrDecShow - Print the PEX address decode map (BARs and windows).
+*
+* DESCRIPTION:
+* This function print the PEX address decode map (BARs and windows).
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvPexAddrDecShow(MV_VOID)
+{
+ MV_PEX_BAR pexBar;
+ MV_PEX_DEC_WIN win;
+ MV_U32 pexIf;
+ MV_U32 bar,winNum;
+
+ for( pexIf = 0; pexIf < mvCtrlPexMaxIfGet(); pexIf++ )
+ {
+ if (MV_FALSE == mvCtrlPwrClckGet(PEX_UNIT_ID, pexIf)) continue;
+ mvOsOutput( "\n" );
+ mvOsOutput( "PEX%d:\n", pexIf );
+ mvOsOutput( "-----\n" );
+
+ mvOsOutput( "\nPex Bars \n\n");
+
+ for( bar = 0; bar < PEX_MAX_BARS; bar++ )
+ {
+ memset( &pexBar, 0, sizeof(MV_PEX_BAR) );
+
+ mvOsOutput( "%s ", pexBarNameGet(bar) );
+
+ if( mvPexBarGet( pexIf, bar, &pexBar ) == MV_OK )
+ {
+ if( pexBar.enable )
+ {
+ mvOsOutput( "base %08x, ", pexBar.addrWin.baseLow );
+ mvSizePrint( pexBar.addrWin.size );
+ mvOsOutput( "\n" );
+ }
+ else
+ mvOsOutput( "disable\n" );
+ }
+ }
+ mvOsOutput( "\nPex Decode Windows\n\n");
+
+ for( winNum = 0; winNum < PEX_MAX_TARGET_WIN - 2; winNum++)
+ {
+ memset( &win, 0,sizeof(MV_PEX_DEC_WIN) );
+
+ mvOsOutput( "win%d - ", winNum );
+
+ if ( mvPexTargetWinGet(pexIf,winNum,&win) == MV_OK)
+ {
+ if (win.enable)
+ {
+ mvOsOutput( "%s base %08x, ",
+ mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+ mvOsOutput( "...." );
+ mvSizePrint( win.addrWin.size );
+
+ mvOsOutput( "\n" );
+ }
+ else
+ mvOsOutput( "disable\n" );
+
+
+ }
+ }
+
+ memset( &win, 0,sizeof(MV_PEX_DEC_WIN) );
+
+ mvOsOutput( "default win - " );
+
+ if ( mvPexTargetWinGet(pexIf, MV_PEX_WIN_DEFAULT, &win) == MV_OK)
+ {
+ mvOsOutput( "%s ",
+ mvCtrlTargetNameGet(win.target) );
+ mvOsOutput( "\n" );
+ }
+ memset( &win, 0,sizeof(MV_PEX_DEC_WIN) );
+
+ mvOsOutput( "Expansion ROM - " );
+
+ if ( mvPexTargetWinGet(pexIf, MV_PEX_WIN_EXP_ROM, &win) == MV_OK)
+ {
+ mvOsOutput( "%s ",
+ mvCtrlTargetNameGet(win.target) );
+ mvOsOutput( "\n" );
+ }
+
+ }
+}
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCSysPEXH
+#define __INCSysPEXH
+
+#include "mvCommon.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+/* 4KB granularity */
+#define MINIMUM_WINDOW_SIZE 0x1000
+#define MINIMUM_BAR_SIZE 0x1000
+#define MINIMUM_BAR_SIZE_MASK 0xFFFFF000
+#define BAR_SIZE_OFFS 12
+#define BAR_SIZE_MASK (0xFFFFF << BAR_SIZE_OFFS)
+
+
+
+#define MV_PEX_WIN_DEFAULT 6
+#define MV_PEX_WIN_EXP_ROM 7
+#define PEX_MAX_TARGET_WIN 8
+
+
+#define PEX_MAX_BARS 3
+#define PEX_INTER_REGS_BAR 0
+#define PEX_DRAM_BAR 1
+#define PEX_DEVICE_BAR 2
+
+/*************************************/
+/* PCI Express BAR Control Registers */
+/*************************************/
+#define PEX_BAR_CTRL_REG(pexIf,bar) (0x41804 + (bar-1)*4- (pexIf)*0x10000)
+#define PEX_EXP_ROM_BAR_CTRL_REG(pexIf) (0x4180C - (pexIf)*0x10000)
+
+
+/* PCI Express BAR Control Register */
+/* PEX_BAR_CTRL_REG (PXBCR) */
+
+#define PXBCR_BAR_EN BIT0
+#define PXBCR_BAR_SIZE_OFFS 16
+#define PXBCR_BAR_SIZE_MASK (0xffff << PXBCR_BAR_SIZE_OFFS)
+#define PXBCR_BAR_SIZE_ALIGNMENT 0x10000
+
+
+
+/* PCI Express Expansion ROM BAR Control Register */
+/* PEX_EXP_ROM_BAR_CTRL_REG (PXERBCR) */
+
+#define PXERBCR_EXPROM_EN BIT0
+#define PXERBCR_EXPROMSZ_OFFS 19
+#define PXERBCR_EXPROMSZ_MASK (0xf << PXERBCR_EXPROMSZ_OFFS)
+#define PXERBCR_EXPROMSZ_512KB (0x0 << PXERBCR_EXPROMSZ_OFFS)
+#define PXERBCR_EXPROMSZ_1024KB (0x1 << PXERBCR_EXPROMSZ_OFFS)
+#define PXERBCR_EXPROMSZ_2048KB (0x3 << PXERBCR_EXPROMSZ_OFFS)
+#define PXERBCR_EXPROMSZ_4096KB (0x7 << PXERBCR_EXPROMSZ_OFFS)
+
+/************************************************/
+/* PCI Express Address Window Control Registers */
+/************************************************/
+#define PEX_WIN0_3_CTRL_REG(pexIf,winNum) \
+ (0x41820 + (winNum) * 0x10 - (pexIf) * 0x10000)
+#define PEX_WIN0_3_BASE_REG(pexIf,winNum) \
+ (0x41824 + (winNum) * 0x10 - (pexIf) * 0x10000)
+#define PEX_WIN0_3_REMAP_REG(pexIf,winNum) \
+ (0x4182C + (winNum) * 0x10 - (pexIf) * 0x10000)
+#define PEX_WIN4_5_CTRL_REG(pexIf,winNum) \
+ (0x41860 + (winNum - 4) * 0x20 - (pexIf) * 0x10000)
+#define PEX_WIN4_5_BASE_REG(pexIf,winNum) \
+ (0x41864 + (winNum - 4) * 0x20 - (pexIf) * 0x10000)
+#define PEX_WIN4_5_REMAP_REG(pexIf,winNum) \
+ (0x4186C + (winNum - 4) * 0x20 - (pexIf) * 0x10000)
+#define PEX_WIN4_5_REMAP_HIGH_REG(pexIf,winNum) \
+ (0x41870 + (winNum - 4) * 0x20 - (pexIf) * 0x10000)
+
+#define PEX_WIN_DEFAULT_CTRL_REG(pexIf) (0x418B0 - (pexIf) * 0x10000)
+#define PEX_WIN_EXP_ROM_CTRL_REG(pexIf) (0x418C0 - (pexIf) * 0x10000)
+#define PEX_WIN_EXP_ROM_REMAP_REG(pexIf) (0x418C4 - (pexIf) * 0x10000)
+
+/* PCI Express Window Control Register */
+/* PEX_WIN_CTRL_REG (PXWCR) */
+
+#define PXWCR_WIN_EN BIT0 /* Window Enable.*/
+
+#define PXWCR_WIN_BAR_MAP_OFFS 1 /* Mapping to BAR.*/
+#define PXWCR_WIN_BAR_MAP_MASK BIT1
+#define PXWCR_WIN_BAR_MAP_BAR1 (0 << PXWCR_WIN_BAR_MAP_OFFS)
+#define PXWCR_WIN_BAR_MAP_BAR2 (1 << PXWCR_WIN_BAR_MAP_OFFS)
+
+#define PXWCR_TARGET_OFFS 4 /*Unit ID */
+#define PXWCR_TARGET_MASK (0xf << PXWCR_TARGET_OFFS)
+
+#define PXWCR_ATTRIB_OFFS 8 /* target attributes */
+#define PXWCR_ATTRIB_MASK (0xff << PXWCR_ATTRIB_OFFS)
+
+#define PXWCR_SIZE_OFFS 16 /* size */
+#define PXWCR_SIZE_MASK (0xffff << PXWCR_SIZE_OFFS)
+#define PXWCR_SIZE_ALIGNMENT 0x10000
+
+/* PCI Express Window Base Register */
+/* PEX_WIN_BASE_REG (PXWBR)*/
+
+#define PXWBR_BASE_OFFS 16 /* address[31:16] */
+#define PXWBR_BASE_MASK (0xffff << PXWBR_BASE_OFFS)
+#define PXWBR_BASE_ALIGNMENT 0x10000
+
+/* PCI Express Window Remap Register */
+/* PEX_WIN_REMAP_REG (PXWRR)*/
+
+#define PXWRR_REMAP_EN BIT0
+#define PXWRR_REMAP_OFFS 16
+#define PXWRR_REMAP_MASK (0xffff << PXWRR_REMAP_OFFS)
+#define PXWRR_REMAP_ALIGNMENT 0x10000
+
+/* PCI Express Window Remap (High) Register */
+/* PEX_WIN_REMAP_HIGH_REG (PXWRHR)*/
+
+#define PXWRHR_REMAP_HIGH_OFFS 0
+#define PXWRHR_REMAP_HIGH_MASK (0xffffffff << PXWRHR_REMAP_HIGH_OFFS)
+
+/* PCI Express Default Window Control Register */
+/* PEX_WIN_DEFAULT_CTRL_REG (PXWDCR) */
+
+#define PXWDCR_TARGET_OFFS 4 /*Unit ID */
+#define PXWDCR_TARGET_MASK (0xf << PXWDCR_TARGET_OFFS)
+#define PXWDCR_ATTRIB_OFFS 8 /* target attributes */
+#define PXWDCR_ATTRIB_MASK (0xff << PXWDCR_ATTRIB_OFFS)
+
+/* PCI Express Expansion ROM Window Control Register */
+/* PEX_WIN_EXP_ROM_CTRL_REG (PXWERCR)*/
+
+#define PXWERCR_TARGET_OFFS 4 /*Unit ID */
+#define PXWERCR_TARGET_MASK (0xf << PXWERCR_TARGET_OFFS)
+#define PXWERCR_ATTRIB_OFFS 8 /* target attributes */
+#define PXWERCR_ATTRIB_MASK (0xff << PXWERCR_ATTRIB_OFFS)
+
+/* PCI Express Expansion ROM Window Remap Register */
+/* PEX_WIN_EXP_ROM_REMAP_REG (PXWERRR)*/
+
+#define PXWERRR_REMAP_EN BIT0
+#define PXWERRR_REMAP_OFFS 16
+#define PXWERRR_REMAP_MASK (0xffff << PXWERRR_REMAP_OFFS)
+#define PXWERRR_REMAP_ALIGNMENT 0x10000
+
+
+
+/*PEX_MEMORY_BAR_BASE_ADDR(barNum) (PXMBBA)*/
+/* PCI Express BAR0 Internal Register*/
+/*PEX BAR0_INTER_REG (PXBIR)*/
+
+#define PXBIR_IOSPACE BIT0 /* Memory Space Indicator */
+
+#define PXBIR_TYPE_OFFS 1 /* BAR Type/Init Val. */
+#define PXBIR_TYPE_MASK (0x3 << PXBIR_TYPE_OFFS)
+#define PXBIR_TYPE_32BIT_ADDR (0x0 << PXBIR_TYPE_OFFS)
+#define PXBIR_TYPE_64BIT_ADDR (0x2 << PXBIR_TYPE_OFFS)
+
+#define PXBIR_PREFETCH_EN BIT3 /* Prefetch Enable */
+
+#define PXBIR_BASE_OFFS 20 /* Base address. Address bits [31:20] */
+#define PXBIR_BASE_MASK (0xfff << PXBIR_BASE_OFFS)
+#define PXBIR_BASE_ALIGNMET (1 << PXBIR_BASE_OFFS)
+
+
+/* PCI Express BAR0 Internal (High) Register*/
+/*PEX BAR0_INTER_REG_HIGH (PXBIRH)*/
+
+#define PXBIRH_BASE_OFFS 0 /* Base address. Bits [63:32] */
+#define PXBIRH_BASE_MASK (0xffffffff << PBBHR_BASE_OFFS)
+
+
+#define PEX_BAR_DEFAULT_ATTRIB 0xc /* Memory - Prefetch - 64 bit address */
+#define PEX_BAR0_DEFAULT_ATTRIB PEX_BAR_DEFAULT_ATTRIB
+#define PEX_BAR1_DEFAULT_ATTRIB PEX_BAR_DEFAULT_ATTRIB
+#define PEX_BAR2_DEFAULT_ATTRIB PEX_BAR_DEFAULT_ATTRIB
+
+
+/* PCI Express BAR1 Register */
+/* PCI Express BAR2 Register*/
+/*PEX BAR1_REG (PXBR)*/
+/*PEX BAR2_REG (PXBR)*/
+
+#define PXBR_IOSPACE BIT0 /* Memory Space Indicator */
+
+#define PXBR_TYPE_OFFS 1 /* BAR Type/Init Val. */
+#define PXBR_TYPE_MASK (0x3 << PXBR_TYPE_OFFS)
+#define PXBR_TYPE_32BIT_ADDR (0x0 << PXBR_TYPE_OFFS)
+#define PXBR_TYPE_64BIT_ADDR (0x2 << PXBR_TYPE_OFFS)
+
+#define PXBR_PREFETCH_EN BIT3 /* Prefetch Enable */
+
+#define PXBR_BASE_OFFS 16 /* Base address. Address bits [31:16] */
+#define PXBR_BASE_MASK (0xffff << PXBR_BASE_OFFS)
+#define PXBR_BASE_ALIGNMET (1 << PXBR_BASE_OFFS)
+
+
+/* PCI Express BAR1 (High) Register*/
+/* PCI Express BAR2 (High) Register*/
+/*PEX BAR1_REG_HIGH (PXBRH)*/
+/*PEX BAR2_REG_HIGH (PXBRH)*/
+
+#define PXBRH_BASE_OFFS 0 /* Base address. Address bits [63:32] */
+#define PXBRH_BASE_MASK (0xffffffff << PXBRH_BASE_OFFS)
+
+/* PCI Express Expansion ROM BAR Register*/
+/*PEX_EXPANSION_ROM_BASE_ADDR_REG (PXERBAR)*/
+
+#define PXERBAR_EXPROMEN BIT0 /* Expansion ROM Enable */
+
+#define PXERBAR_BASE_512K_OFFS 19 /* Expansion ROM Base Address */
+#define PXERBAR_BASE_512K_MASK (0x1fff << PXERBAR_BASE_512K_OFFS)
+
+#define PXERBAR_BASE_1MB_OFFS 20 /* Expansion ROM Base Address */
+#define PXERBAR_BASE_1MB_MASK (0xfff << PXERBAR_BASE_1MB_OFFS)
+
+#define PXERBAR_BASE_2MB_OFFS 21 /* Expansion ROM Base Address */
+#define PXERBAR_BASE_2MB_MASK (0x7ff << PXERBAR_BASE_2MB_OFFS)
+
+#define PXERBAR_BASE_4MB_OFFS 22 /* Expansion ROM Base Address */
+#define PXERBAR_BASE_4MB_MASK (0x3ff << PXERBAR_BASE_4MB_OFFS)
+
+/* PEX Bar attributes */
+typedef struct _mvPexBar
+{
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+}MV_PEX_BAR;
+
+/* PEX Remap Window attributes */
+typedef struct _mvPexRemapWin
+{
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+}MV_PEX_REMAP_WIN;
+
+/* PEX Remap Window attributes */
+typedef struct _mvPexDecWin
+{
+ MV_TARGET target;
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_U32 targetBar;
+ MV_U8 attrib; /* chip select attributes */
+ MV_TARGET_ID targetId; /* Target Id of this MV_TARGET */
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+}MV_PEX_DEC_WIN;
+
+/* Global Functions prototypes */
+/* mvPexHalInit - Initialize PEX interfaces*/
+MV_STATUS mvPexInit(MV_U32 pexIf, MV_PEX_TYPE pexType);
+
+
+/* mvPexTargetWinSet - Set PEX to peripheral target address window BAR*/
+MV_STATUS mvPexTargetWinSet(MV_U32 pexIf, MV_U32 winNum,
+ MV_PEX_DEC_WIN *pAddrDecWin);
+
+/* mvPexTargetWinGet - Get PEX to peripheral target address window*/
+MV_STATUS mvPexTargetWinGet(MV_U32 pexIf, MV_U32 winNum,
+ MV_PEX_DEC_WIN *pAddrDecWin);
+
+/* mvPexTargetWinEnable - Enable/disable a PEX BAR window*/
+MV_STATUS mvPexTargetWinEnable(MV_U32 pexIf,MV_U32 winNum, MV_BOOL enable);
+
+/* mvPexTargetWinRemap - Set PEX to target address window remap.*/
+MV_STATUS mvPexTargetWinRemap(MV_U32 pexIf, MV_U32 winNum,
+ MV_PEX_REMAP_WIN *pAddrWin);
+
+/* mvPexTargetWinRemapEnable -enable\disable a PEX Window remap.*/
+MV_STATUS mvPexTargetWinRemapEnable(MV_U32 pexIf, MV_U32 winNum,
+ MV_BOOL enable);
+
+/* mvPexBarSet - Set PEX bar address and size */
+MV_STATUS mvPexBarSet(MV_U32 pexIf, MV_U32 barNum, MV_PEX_BAR *addrWin);
+
+/* mvPexBarGet - Get PEX bar address and size */
+MV_STATUS mvPexBarGet(MV_U32 pexIf, MV_U32 barNum, MV_PEX_BAR *addrWin);
+
+/* mvPexBarEnable - enable\disable a PEX bar*/
+MV_STATUS mvPexBarEnable(MV_U32 pexIf, MV_U32 barNum, MV_BOOL enable);
+
+/* mvPexAddrDecShow - Display address decode windows attributes */
+MV_VOID mvPexAddrDecShow(MV_VOID);
+
+#endif
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "mvTypes.h"
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "cpu/mvCpu.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "sata/CoreDriver/mvRegs.h"
+#include "ctrlEnv/sys/mvSysSata.h"
+
+MV_TARGET sataAddrDecPrioTab[] =
+{
+#if defined(MV_INCLUDE_SDRAM_CS0)
+ SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+ SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+ SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+ SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_PEX)
+ PEX0_MEM,
+#endif
+ TBL_TERM
+};
+
+
+/*******************************************************************************
+* sataWinOverlapDetect - Detect SATA address windows overlapping
+*
+* DESCRIPTION:
+* An unpredicted behaviur is expected in case SATA address decode
+* windows overlapps.
+* This function detects SATA address decode windows overlapping of a
+* specified window. The function does not check the window itself for
+* overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+* winNum - address decode window number.
+* pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlap current address
+* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data
+* from registers.
+*
+*******************************************************************************/
+static MV_STATUS sataWinOverlapDetect(int dev, MV_U32 winNum,
+ MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 winNumIndex;
+ MV_SATA_DEC_WIN addrDecWin;
+
+ for(winNumIndex=0; winNumIndex<MV_SATA_MAX_ADDR_DECODE_WIN; winNumIndex++)
+ {
+ /* Do not check window itself */
+ if (winNumIndex == winNum)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvSataWinGet(dev, winNumIndex, &addrDecWin))
+ {
+ mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ /* Do not check disabled windows */
+ if(addrDecWin.enable == MV_FALSE)
+ {
+ continue;
+ }
+
+ if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+ {
+ return MV_TRUE;
+ }
+ }
+ return MV_FALSE;
+}
+
+
+/*******************************************************************************
+* mvSataWinSet - Set SATA target address window
+*
+* DESCRIPTION:
+* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+* address window, also known as address decode window.
+* After setting this target window, the SATA will be able to access the
+* target within the address window.
+*
+* INPUT:
+* winNum - SATA target address decode window number.
+* pAddrDecWin - SATA target window data structure.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if address window overlapps with other address decode windows.
+* MV_BAD_PARAM if base address is invalid parameter or target is
+* unknown.
+*
+*******************************************************************************/
+MV_STATUS mvSataWinSet(int dev, MV_U32 winNum, MV_SATA_DEC_WIN *pAddrDecWin)
+{
+ MV_TARGET_ATTRIB targetAttribs;
+ MV_DEC_REGS decRegs;
+
+ /* Parameter checking */
+ if (winNum >= MV_SATA_MAX_ADDR_DECODE_WIN)
+ {
+ mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check if the requested window overlapps with current windows */
+ if (MV_TRUE == sataWinOverlapDetect(dev, winNum, &pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum);
+ return MV_ERROR;
+ }
+
+ /* check if address is aligned to the size */
+ if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvSataWinSet:Error setting SATA window %d to "\
+ "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ winNum,
+ mvCtrlTargetNameGet(pAddrDecWin->target),
+ pAddrDecWin->addrWin.baseLow,
+ pAddrDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+ decRegs.baseReg = 0;
+ decRegs.sizeReg = 0;
+
+ if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+ {
+ mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs);
+
+ /* set attributes */
+ decRegs.sizeReg &= ~MV_SATA_WIN_ATTR_MASK;
+ decRegs.sizeReg |= (targetAttribs.attrib << MV_SATA_WIN_ATTR_OFFSET);
+
+ /* set target ID */
+ decRegs.sizeReg &= ~MV_SATA_WIN_TARGET_MASK;
+ decRegs.sizeReg |= (targetAttribs.targetId << MV_SATA_WIN_TARGET_OFFSET);
+
+ if (pAddrDecWin->enable == MV_TRUE)
+ {
+ decRegs.sizeReg |= MV_SATA_WIN_ENABLE_MASK;
+ }
+ else
+ {
+ decRegs.sizeReg &= ~MV_SATA_WIN_ENABLE_MASK;
+ }
+
+ MV_REG_WRITE( MV_SATA_WIN_CTRL_REG(dev, winNum), decRegs.sizeReg);
+ MV_REG_WRITE( MV_SATA_WIN_BASE_REG(dev, winNum), decRegs.baseReg);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSataWinGet - Get SATA peripheral target address window.
+*
+* DESCRIPTION:
+* Get SATA peripheral target address window.
+*
+* INPUT:
+* winNum - SATA target address decode window number.
+*
+* OUTPUT:
+* pAddrDecWin - SATA target window data structure.
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvSataWinGet(int dev, MV_U32 winNum, MV_SATA_DEC_WIN *pAddrDecWin)
+{
+ MV_DEC_REGS decRegs;
+ MV_TARGET_ATTRIB targetAttrib;
+
+ /* Parameter checking */
+ if (winNum >= MV_SATA_MAX_ADDR_DECODE_WIN)
+ {
+ mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n",
+ __FUNCTION__, dev, winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+ decRegs.baseReg = MV_REG_READ( MV_SATA_WIN_BASE_REG(dev, winNum) );
+ decRegs.sizeReg = MV_REG_READ( MV_SATA_WIN_CTRL_REG(dev, winNum) );
+
+ if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) )
+ {
+ mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ /* attrib and targetId */
+ targetAttrib.attrib = (decRegs.sizeReg & MV_SATA_WIN_ATTR_MASK) >>
+ MV_SATA_WIN_ATTR_OFFSET;
+ targetAttrib.targetId = (decRegs.sizeReg & MV_SATA_WIN_TARGET_MASK) >>
+ MV_SATA_WIN_TARGET_OFFSET;
+
+ pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+ /* Check if window is enabled */
+ if(decRegs.sizeReg & MV_SATA_WIN_ENABLE_MASK)
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrDecWin->enable = MV_FALSE;
+ }
+ return MV_OK;
+}
+/*******************************************************************************
+* mvSataAddrDecShow - Print the SATA address decode map.
+*
+* DESCRIPTION:
+* This function print the SATA address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvSataAddrDecShow(MV_VOID)
+{
+
+ MV_SATA_DEC_WIN win;
+ int i,j;
+
+
+
+ for( j = 0; j < MV_SATA_MAX_CHAN; j++ )
+ {
+ if (MV_FALSE == mvCtrlPwrClckGet(SATA_UNIT_ID, j))
+ return;
+
+ mvOsOutput( "\n" );
+ mvOsOutput( "SATA %d:\n", j );
+ mvOsOutput( "----\n" );
+
+ for( i = 0; i < MV_SATA_MAX_ADDR_DECODE_WIN; i++ )
+ {
+ memset( &win, 0, sizeof(MV_SATA_DEC_WIN) );
+
+ mvOsOutput( "win%d - ", i );
+
+ if( mvSataWinGet(j, i, &win ) == MV_OK )
+ {
+ if( win.enable )
+ {
+ mvOsOutput( "%s base %08x, ",
+ mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+ mvOsOutput( "...." );
+
+ mvSizePrint( win.addrWin.size );
+
+ mvOsOutput( "\n" );
+ }
+ else
+ mvOsOutput( "disable\n" );
+ }
+ }
+ }
+}
+
+
+/*******************************************************************************
+* mvSataWinInit - Initialize the integrated SATA target address window.
+*
+* DESCRIPTION:
+* Initialize the SATA peripheral target address window.
+*
+* INPUT:
+*
+*
+* OUTPUT:
+*
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvSataWinInit(MV_VOID)
+{
+ int winNum;
+ MV_SATA_DEC_WIN sataWin;
+ MV_CPU_DEC_WIN cpuAddrDecWin;
+ MV_U32 status, winPrioIndex = 0;
+
+ /* Initiate Sata address decode */
+
+ /* First disable all address decode windows */
+ for(winNum = 0; winNum < MV_SATA_MAX_ADDR_DECODE_WIN; winNum++)
+ {
+ MV_U32 regVal = MV_REG_READ(MV_SATA_WIN_CTRL_REG(0, winNum));
+ regVal &= ~MV_SATA_WIN_ENABLE_MASK;
+ MV_REG_WRITE(MV_SATA_WIN_CTRL_REG(0, winNum), regVal);
+ }
+
+ winNum = 0;
+ while( (sataAddrDecPrioTab[winPrioIndex] != TBL_TERM) &&
+ (winNum < MV_SATA_MAX_ADDR_DECODE_WIN) )
+ {
+ /* first get attributes from CPU If */
+ status = mvCpuIfTargetWinGet(sataAddrDecPrioTab[winPrioIndex],
+ &cpuAddrDecWin);
+
+ if(MV_NO_SUCH == status)
+ {
+ winPrioIndex++;
+ continue;
+ }
+ if (MV_OK != status)
+ {
+ mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ if (cpuAddrDecWin.enable == MV_TRUE)
+ {
+ sataWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+ sataWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+ sataWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+ sataWin.enable = MV_TRUE;
+ sataWin.target = sataAddrDecPrioTab[winPrioIndex];
+
+ if(MV_OK != mvSataWinSet(0/*dev*/, winNum, &sataWin))
+ {
+ return MV_ERROR;
+ }
+ winNum++;
+ }
+ winPrioIndex++;
+ }
+ return MV_OK;
+}
+
+
+
--- /dev/null
+
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __INCMVSysSataAddrDech
+#define __INCMVSysSataAddrDech
+
+#include "mvCommon.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct _mvSataDecWin
+{
+ MV_TARGET target;
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+} MV_SATA_DEC_WIN;
+
+
+#define MV_SATA_MAX_ADDR_DECODE_WIN 4
+
+#define MV_SATA_WIN_CTRL_REG(dev, win) (SATA_REG_BASE + 0x30 + ((win)<<4))
+#define MV_SATA_WIN_BASE_REG(dev, win) (SATA_REG_BASE + 0x34 + ((win)<<4))
+
+/* BITs in Bridge Interrupt Cause and Mask registers */
+#define MV_SATA_ADDR_DECODE_ERROR_BIT 0
+#define MV_SATA_ADDR_DECODE_ERROR_MASK (1<<MV_SATA_ADDR_DECODE_ERROR_BIT)
+
+/* BITs in Windows 0-3 Control and Base Registers */
+#define MV_SATA_WIN_ENABLE_BIT 0
+#define MV_SATA_WIN_ENABLE_MASK (1<<MV_SATA_WIN_ENABLE_BIT)
+
+#define MV_SATA_WIN_TARGET_OFFSET 4
+#define MV_SATA_WIN_TARGET_MASK (0xF<<MV_SATA_WIN_TARGET_OFFSET)
+
+#define MV_SATA_WIN_ATTR_OFFSET 8
+#define MV_SATA_WIN_ATTR_MASK (0xFF<<MV_SATA_WIN_ATTR_OFFSET)
+
+#define MV_SATA_WIN_SIZE_OFFSET 16
+#define MV_SATA_WIN_SIZE_MASK (0xFFFF<<MV_SATA_WIN_SIZE_OFFSET)
+
+#define MV_SATA_WIN_BASE_OFFSET 16
+#define MV_SATA_WIN_BASE_MASK (0xFFFF<<MV_SATA_WIN_BASE_OFFSET)
+
+MV_STATUS mvSataWinGet(int dev, MV_U32 winNum, MV_SATA_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSataWinSet(int dev, MV_U32 winNum, MV_SATA_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSataWinByTargetGet(MV_TARGET target, MV_SATA_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSataWinInit(MV_VOID);
+MV_VOID mvSataAddrDecShow(MV_VOID);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
+
+
+
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "mvTypes.h"
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "cpu/mvCpu.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "mvRegs.h"
+#include "ctrlEnv/sys/mvSysSdmmc.h"
+
+MV_TARGET sdmmcAddrDecPrioTab[] =
+{
+#if defined(MV_INCLUDE_SDRAM_CS0)
+ SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+ SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+ SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+ SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_PEX)
+ PEX0_MEM,
+#endif
+ TBL_TERM
+};
+
+
+/*******************************************************************************
+* sdmmcWinOverlapDetect - Detect SDMMC address windows overlapping
+*
+* DESCRIPTION:
+* An unpredicted behaviur is expected in case SDMMC address decode
+* windows overlapps.
+* This function detects SDMMC address decode windows overlapping of a
+* specified window. The function does not check the window itself for
+* overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+* winNum - address decode window number.
+* pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlap current address
+* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data
+* from registers.
+*
+*******************************************************************************/
+static MV_STATUS sdmmcWinOverlapDetect(int dev, MV_U32 winNum,
+ MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 winNumIndex;
+ MV_SDMMC_DEC_WIN addrDecWin;
+
+ for(winNumIndex=0; winNumIndex<MV_SDMMC_MAX_ADDR_DECODE_WIN; winNumIndex++)
+ {
+ /* Do not check window itself */
+ if (winNumIndex == winNum)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvSdmmcWinGet(dev, winNumIndex, &addrDecWin))
+ {
+ mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ /* Do not check disabled windows */
+ if(addrDecWin.enable == MV_FALSE)
+ {
+ continue;
+ }
+
+ if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+ {
+ return MV_TRUE;
+ }
+ }
+ return MV_FALSE;
+}
+
+
+/*******************************************************************************
+* mvSdmmcWinSet - Set SDMMC target address window
+*
+* DESCRIPTION:
+* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+* address window, also known as address decode window.
+* After setting this target window, the SDMMC will be able to access the
+* target within the address window.
+*
+* INPUT:
+* winNum - SDMMC target address decode window number.
+* pAddrDecWin - SDMMC target window data structure.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if address window overlapps with other address decode windows.
+* MV_BAD_PARAM if base address is invalid parameter or target is
+* unknown.
+*
+*******************************************************************************/
+MV_STATUS mvSdmmcWinSet(int dev, MV_U32 winNum, MV_SDMMC_DEC_WIN *pAddrDecWin)
+{
+ MV_TARGET_ATTRIB targetAttribs;
+ MV_DEC_REGS decRegs;
+
+ /* Parameter checking */
+ if (winNum >= MV_SDMMC_MAX_ADDR_DECODE_WIN)
+ {
+ mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check if the requested window overlapps with current windows */
+ if (MV_TRUE == sdmmcWinOverlapDetect(dev, winNum, &pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum);
+ return MV_ERROR;
+ }
+
+ /* check if address is aligned to the size */
+ if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvSdmmcWinSet:Error setting SDMMC window %d to "\
+ "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ winNum,
+ mvCtrlTargetNameGet(pAddrDecWin->target),
+ pAddrDecWin->addrWin.baseLow,
+ pAddrDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+ decRegs.baseReg = 0;
+ decRegs.sizeReg = 0;
+
+ if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+ {
+ mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs);
+
+ /* set attributes */
+ decRegs.sizeReg &= ~MV_SDMMC_WIN_ATTR_MASK;
+ decRegs.sizeReg |= (targetAttribs.attrib << MV_SDMMC_WIN_ATTR_OFFSET);
+
+ /* set target ID */
+ decRegs.sizeReg &= ~MV_SDMMC_WIN_TARGET_MASK;
+ decRegs.sizeReg |= (targetAttribs.targetId << MV_SDMMC_WIN_TARGET_OFFSET);
+
+ if (pAddrDecWin->enable == MV_TRUE)
+ {
+ decRegs.sizeReg |= MV_SDMMC_WIN_ENABLE_MASK;
+ }
+ else
+ {
+ decRegs.sizeReg &= ~MV_SDMMC_WIN_ENABLE_MASK;
+ }
+
+ MV_REG_WRITE( MV_SDMMC_WIN_CTRL_REG(dev, winNum), decRegs.sizeReg);
+ MV_REG_WRITE( MV_SDMMC_WIN_BASE_REG(dev, winNum), decRegs.baseReg);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSdmmcWinGet - Get SDMMC peripheral target address window.
+*
+* DESCRIPTION:
+* Get SDMMC peripheral target address window.
+*
+* INPUT:
+* winNum - SDMMC target address decode window number.
+*d
+* OUTPUT:
+* pAddrDecWin - SDMMC target window data structure.
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvSdmmcWinGet(int dev, MV_U32 winNum, MV_SDMMC_DEC_WIN *pAddrDecWin)
+{
+ MV_DEC_REGS decRegs;
+ MV_TARGET_ATTRIB targetAttrib;
+
+ /* Parameter checking */
+ if (winNum >= MV_SDMMC_MAX_ADDR_DECODE_WIN)
+ {
+ mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n",
+ __FUNCTION__, dev, winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+ decRegs.baseReg = MV_REG_READ( MV_SDMMC_WIN_BASE_REG(dev, winNum) );
+ decRegs.sizeReg = MV_REG_READ( MV_SDMMC_WIN_CTRL_REG(dev, winNum) );
+
+ if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) )
+ {
+ mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ /* attrib and targetId */
+ targetAttrib.attrib = (decRegs.sizeReg & MV_SDMMC_WIN_ATTR_MASK) >>
+ MV_SDMMC_WIN_ATTR_OFFSET;
+ targetAttrib.targetId = (decRegs.sizeReg & MV_SDMMC_WIN_TARGET_MASK) >>
+ MV_SDMMC_WIN_TARGET_OFFSET;
+
+ pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+ /* Check if window is enabled */
+ if(decRegs.sizeReg & MV_SDMMC_WIN_ENABLE_MASK)
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrDecWin->enable = MV_FALSE;
+ }
+ return MV_OK;
+}
+/*******************************************************************************
+* mvSdmmcAddrDecShow - Print the SDMMC address decode map.
+*
+* DESCRIPTION:
+* This function print the SDMMC address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvSdmmcAddrDecShow(MV_VOID)
+{
+
+ MV_SDMMC_DEC_WIN win;
+ int i,j=0;
+
+
+
+ if (MV_FALSE == mvCtrlPwrClckGet(SDIO_UNIT_ID, 0))
+ return;
+
+ mvOsOutput( "\n" );
+ mvOsOutput( "SDMMC %d:\n", j );
+ mvOsOutput( "----\n" );
+
+ for( i = 0; i < MV_SDMMC_MAX_ADDR_DECODE_WIN; i++ )
+ {
+ memset( &win, 0, sizeof(MV_SDMMC_DEC_WIN) );
+
+ mvOsOutput( "win%d - ", i );
+
+ if( mvSdmmcWinGet(j, i, &win ) == MV_OK )
+ {
+ if( win.enable )
+ {
+ mvOsOutput( "%s base %08x, ",
+ mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+ mvOsOutput( "...." );
+
+ mvSizePrint( win.addrWin.size );
+
+ mvOsOutput( "\n" );
+ }
+ else
+ mvOsOutput( "disable\n" );
+ }
+ }
+}
+
+
+/*******************************************************************************
+* mvSdmmcWinInit - Initialize the integrated SDMMC target address window.
+*
+* DESCRIPTION:
+* Initialize the SDMMC peripheral target address window.
+*
+* INPUT:
+*
+*
+* OUTPUT:
+*
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvSdmmcWinInit(MV_VOID)
+{
+ int winNum;
+ MV_SDMMC_DEC_WIN sdmmcWin;
+ MV_CPU_DEC_WIN cpuAddrDecWin;
+ MV_U32 status, winPrioIndex = 0;
+
+ /* Initiate Sdmmc address decode */
+
+ /* First disable all address decode windows */
+ for(winNum = 0; winNum < MV_SDMMC_MAX_ADDR_DECODE_WIN; winNum++)
+ {
+ MV_U32 regVal = MV_REG_READ(MV_SDMMC_WIN_CTRL_REG(0, winNum));
+ regVal &= ~MV_SDMMC_WIN_ENABLE_MASK;
+ MV_REG_WRITE(MV_SDMMC_WIN_CTRL_REG(0, winNum), regVal);
+ }
+
+ winNum = 0;
+ while( (sdmmcAddrDecPrioTab[winPrioIndex] != TBL_TERM) &&
+ (winNum < MV_SDMMC_MAX_ADDR_DECODE_WIN) )
+ {
+ /* first get attributes from CPU If */
+ status = mvCpuIfTargetWinGet(sdmmcAddrDecPrioTab[winPrioIndex],
+ &cpuAddrDecWin);
+
+ if(MV_NO_SUCH == status)
+ {
+ winPrioIndex++;
+ continue;
+ }
+ if (MV_OK != status)
+ {
+ mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ if (cpuAddrDecWin.enable == MV_TRUE)
+ {
+ sdmmcWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+ sdmmcWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+ sdmmcWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+ sdmmcWin.enable = MV_TRUE;
+ sdmmcWin.target = sdmmcAddrDecPrioTab[winPrioIndex];
+
+ if(MV_OK != mvSdmmcWinSet(0/*dev*/, winNum, &sdmmcWin))
+ {
+ return MV_ERROR;
+ }
+ winNum++;
+ }
+ winPrioIndex++;
+ }
+ return MV_OK;
+}
+
+
+
--- /dev/null
+
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __INCMVSysSdmmcAddrDech
+#define __INCMVSysSdmmcAddrDech
+
+#include "mvCommon.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct _mvSdmmcDecWin
+{
+ MV_TARGET target;
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+} MV_SDMMC_DEC_WIN;
+
+
+#define MV_SDMMC_MAX_ADDR_DECODE_WIN 4
+
+#define MV_SDMMC_WIN_CTRL_REG(dev, win) (MV_SDIO_REG_BASE + 0x108 + ((win)<<3))
+#define MV_SDMMC_WIN_BASE_REG(dev, win) (MV_SDIO_REG_BASE + 0x10c + ((win)<<3))
+
+
+/* BITs in Windows 0-3 Control and Base Registers */
+#define MV_SDMMC_WIN_ENABLE_BIT 0
+#define MV_SDMMC_WIN_ENABLE_MASK (1<<MV_SDMMC_WIN_ENABLE_BIT)
+
+#define MV_SDMMC_WIN_TARGET_OFFSET 4
+#define MV_SDMMC_WIN_TARGET_MASK (0xF<<MV_SDMMC_WIN_TARGET_OFFSET)
+
+#define MV_SDMMC_WIN_ATTR_OFFSET 8
+#define MV_SDMMC_WIN_ATTR_MASK (0xFF<<MV_SDMMC_WIN_ATTR_OFFSET)
+
+#define MV_SDMMC_WIN_SIZE_OFFSET 16
+#define MV_SDMMC_WIN_SIZE_MASK (0xFFFF<<MV_SDMMC_WIN_SIZE_OFFSET)
+
+#define MV_SDMMC_WIN_BASE_OFFSET 16
+#define MV_SDMMC_WIN_BASE_MASK (0xFFFF<<MV_SDMMC_WIN_BASE_OFFSET)
+
+MV_STATUS mvSdmmcWinGet(int dev, MV_U32 winNum, MV_SDMMC_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSdmmcWinSet(int dev, MV_U32 winNum, MV_SDMMC_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSdmmcWinByTargetGet(MV_TARGET target, MV_SDMMC_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSdmmcWinInit(MV_VOID);
+MV_VOID mvSdmmcAddrDecShow(MV_VOID);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
+
+
+
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvSysTdm.h"
+
+
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+static MV_TARGET tdmAddrDecPrioTap[] =
+{
+ PEX0_MEM,
+ SDRAM_CS0,
+ SDRAM_CS1,
+ SDRAM_CS2,
+ SDRAM_CS3,
+ DEVICE_CS0,
+ DEVICE_CS1,
+ DEVICE_CS2,
+ DEV_BOOCS,
+ PEX0_IO,
+ TBL_TERM
+};\r
+
+static MV_STATUS tdmWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin);
+
+/*******************************************************************************
+* mvTdmWinInit - Initialize TDM address decode windows
+*
+* DESCRIPTION:
+* This function initialize TDM window decode unit. It set the
+* default address decode
+* windows of the unit.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if setting fail.
+*******************************************************************************/
+
+MV_STATUS mvTdmWinInit(void)
+{
+ MV_U32 winNum;
+ MV_U32 winPrioIndex = 0;
+ MV_CPU_DEC_WIN cpuAddrDecWin;
+ MV_TDM_DEC_WIN tdmWin;
+ MV_STATUS status;
+
+ /*Disable all windows*/
+ for (winNum = 0; winNum < TDM_MBUS_MAX_WIN; winNum++)
+ {
+ mvTdmWinEnable(winNum, MV_FALSE);
+ }
+
+ for (winNum = 0; ((tdmAddrDecPrioTap[winPrioIndex] != TBL_TERM) &&
+ (winNum < TDM_MBUS_MAX_WIN)); )
+ {
+ status = mvCpuIfTargetWinGet(tdmAddrDecPrioTap[winPrioIndex],
+ &cpuAddrDecWin);
+ if (MV_NO_SUCH == status)
+ {
+ winPrioIndex++;
+ continue;
+ }
+ if (MV_OK != status)
+ {
+ mvOsPrintf("mvTdmInit: ERR. mvCpuIfTargetWinGet failed\n");
+ return MV_ERROR;
+ }
+
+ if (cpuAddrDecWin.enable == MV_TRUE)
+ {
+ tdmWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+ tdmWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+ tdmWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+ tdmWin.enable = MV_TRUE;
+ tdmWin.target = tdmAddrDecPrioTap[winPrioIndex];
+ if (MV_OK != mvTdmWinSet(winNum, &tdmWin))
+ {
+ return MV_ERROR;
+ }
+ winNum++;
+ }
+ winPrioIndex++;
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvTdmWinSet - Set TDM target address window
+*
+* DESCRIPTION:
+* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+* address window, also known as address decode window.
+* After setting this target window, the TDM will be able to access the
+* target within the address window.
+*
+* INPUT:
+* winNum - TDM to target address decode window number.
+* pAddrDecWin - TDM target window data structure.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if address window overlapps with other address decode windows.
+* MV_BAD_PARAM if base address is invalid parameter or target is
+* unknown.
+*
+*******************************************************************************/
+
+MV_STATUS mvTdmWinSet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin)
+{
+ MV_TARGET_ATTRIB targetAttribs;
+ MV_DEC_REGS decRegs;
+ MV_U32 ctrlReg = 0;
+
+ /* Parameter checking */
+ if (winNum >= TDM_MBUS_MAX_WIN)
+ {
+ mvOsPrintf("mvTdmWinSet: ERR. Invalid win num %d\n",winNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check if the requested window overlapps with current windows */
+ if (MV_TRUE == tdmWinOverlapDetect(winNum, &pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("mvTdmWinSet: ERR. Window %d overlap\n", winNum);
+ return MV_ERROR;
+ }
+
+ /* check if address is aligned to the size */
+ if (MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvTdmWinSet: Error setting TDM window %d to "\
+ "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ winNum,
+ mvCtrlTargetNameGet(pAddrDecWin->target),
+ pAddrDecWin->addrWin.baseLow,
+ pAddrDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+ decRegs.baseReg = MV_REG_READ(TDM_WIN_BASE_REG(winNum));
+ decRegs.sizeReg = (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_SIZE_MASK) >> TDM_WIN_SIZE_OFFS;
+
+ if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+ {
+ mvOsPrintf("mvTdmWinSet: mvCtrlAddrDecToReg Failed\n");
+ return MV_ERROR;
+ }
+
+ mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs);
+
+ /* for the safe side we disable the window before writing the new
+ values */
+ mvTdmWinEnable(winNum, MV_FALSE);
+
+ ctrlReg |= (targetAttribs.attrib << TDM_WIN_ATTRIB_OFFS);
+ ctrlReg |= (targetAttribs.targetId << TDM_WIN_TARGET_OFFS);
+ ctrlReg |= (decRegs.sizeReg & TDM_WIN_SIZE_MASK);
+
+ /* Write to address base and control registers */
+ MV_REG_WRITE(TDM_WIN_BASE_REG(winNum), decRegs.baseReg);
+ MV_REG_WRITE(TDM_WIN_CTRL_REG(winNum), ctrlReg);
+ /* Enable address decode target window */
+ if (pAddrDecWin->enable == MV_TRUE)
+ {
+ mvTdmWinEnable(winNum, MV_TRUE);
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvTdmWinGet - Get peripheral target address window.
+*
+* DESCRIPTION:
+* Get TDM peripheral target address window.
+*
+* INPUT:
+* winNum - TDM to target address decode window number.
+*
+* OUTPUT:
+* pAddrDecWin - TDM target window data structure.
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+
+MV_STATUS mvTdmWinGet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin)
+{
+
+ MV_DEC_REGS decRegs;
+ MV_TARGET_ATTRIB targetAttrib;
+
+ /* Parameter checking */
+ if (winNum >= TDM_MBUS_MAX_WIN)
+ {
+ mvOsPrintf("mvTdmWinGet: ERR. Invalid winNum %d\n", winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+ decRegs.baseReg = MV_REG_READ(TDM_WIN_BASE_REG(winNum));
+ decRegs.sizeReg = (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_SIZE_MASK) >> TDM_WIN_SIZE_OFFS;
+
+ if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin)))
+ {
+ mvOsPrintf("mvTdmWinGet: mvCtrlRegToAddrDec Failed \n");
+ return MV_ERROR;
+ }
+
+ /* attrib and targetId */
+ targetAttrib.attrib =
+ (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ATTRIB_MASK) >> TDM_WIN_ATTRIB_OFFS;
+ targetAttrib.targetId =
+ (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_TARGET_MASK) >> TDM_WIN_TARGET_OFFS;
+
+ pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+ /* Check if window is enabled */
+ if (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ENABLE_MASK)
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrDecWin->enable = MV_FALSE;
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvTdmWinEnable - Enable/disable a TDM to target address window
+*
+* DESCRIPTION:
+* This function enable/disable a TDM to target address window.
+* According to parameter 'enable' the routine will enable the
+* window, thus enabling TDM accesses (before enabling the window it is
+* tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+* winNum - TDM to target address decode window number.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* N/A
+*
+* RETURN:
+* MV_ERROR if decode window number was wrong or enabled window overlapps.
+*
+*******************************************************************************/
+MV_STATUS mvTdmWinEnable(int winNum, MV_BOOL enable)
+{
+ MV_TDM_DEC_WIN addrDecWin;
+
+ if (MV_TRUE == enable)
+ {
+ if (winNum >= TDM_MBUS_MAX_WIN)
+ {
+ mvOsPrintf("mvTdmWinEnable:ERR. Invalid winNum%d\n",winNum);
+ return MV_ERROR;
+ }
+
+ /* First check for overlap with other enabled windows */
+ /* Get current window */
+ if (MV_OK != mvTdmWinGet(winNum, &addrDecWin))
+ {
+ mvOsPrintf("mvTdmWinEnable:ERR. targetWinGet fail\n");
+ return MV_ERROR;
+ }
+ /* Check for overlapping */
+ if (MV_FALSE == tdmWinOverlapDetect(winNum, &(addrDecWin.addrWin)))
+ {
+ /* No Overlap. Enable address decode target window */
+ MV_REG_BIT_SET(TDM_WIN_CTRL_REG(winNum), TDM_WIN_ENABLE_MASK);
+ }
+ else
+ { /* Overlap detected */
+ mvOsPrintf("mvTdmWinEnable:ERR. Overlap detected\n");
+ return MV_ERROR;
+ }
+ }
+ else
+ {
+ MV_REG_BIT_RESET(TDM_WIN_CTRL_REG(winNum), TDM_WIN_ENABLE_MASK);
+ }
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* tdmWinOverlapDetect - Detect TDM address windows overlapping
+*
+* DESCRIPTION:
+* An unpredicted behaviour is expected in case TDM address decode
+* windows overlapps.
+* This function detects TDM address decode windows overlapping of a
+* specified window. The function does not check the window itself for
+* overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+* winNum - address decode window number.
+* pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlap current address
+* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data
+* from registers.
+*
+*******************************************************************************/
+static MV_STATUS tdmWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 winNumIndex;
+ MV_TDM_DEC_WIN addrDecWin;
+
+ for (winNumIndex = 0; winNumIndex < TDM_MBUS_MAX_WIN; winNumIndex++)
+ {
+ /* Do not check window itself */
+ if (winNumIndex == winNum)
+ {
+ continue;
+ }
+ /* Do not check disabled windows */
+ if (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ENABLE_MASK)
+ {
+ /* Get window parameters */
+ if (MV_OK != mvTdmWinGet(winNumIndex, &addrDecWin))
+ {
+ DB(mvOsPrintf("dmaWinOverlapDetect: ERR. TargetWinGet failed\n"));
+ return MV_ERROR;
+ }
+
+ if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+ {
+ return MV_TRUE;
+ }
+ }
+ }
+ return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvTdmAddrDecShow - Print the TDM address decode map.
+*
+* DESCRIPTION:
+* This function print the TDM address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvTdmAddrDecShow(MV_VOID)
+{
+ MV_TDM_DEC_WIN win;
+ int i;
+
+ mvOsOutput( "\n" );
+ mvOsOutput( "TDM:\n" );
+ mvOsOutput( "----\n" );
+
+ for( i = 0; i < TDM_MBUS_MAX_WIN; i++ )
+ {
+ memset( &win, 0, sizeof(MV_TDM_DEC_WIN) );
+
+ mvOsOutput( "win%d - ", i );
+
+ if (mvTdmWinGet(i, &win ) == MV_OK )
+ {
+ if( win.enable )
+ {
+ mvOsOutput( "%s base %08x, ",
+ mvCtrlTargetNameGet(win.target), win.addrWin.baseLow);
+ mvOsOutput( "...." );
+ mvSizePrint( win.addrWin.size );
+ mvOsOutput( "\n" );
+ }
+ else
+ mvOsOutput( "disable\n" );
+ }
+ }
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSysTdmh
+#define __INCmvSysTdmh
+
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+typedef struct _mvTdmDecWin
+{
+ MV_TARGET target;
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+} MV_TDM_DEC_WIN;
+
+MV_STATUS mvTdmWinInit(MV_VOID);
+MV_STATUS mvTdmWinSet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvTdmWinGet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvTdmWinEnable(int winNum, MV_BOOL enable);
+MV_VOID mvTdmAddrDecShow(MV_VOID);
+
+
+#define TDM_MBUS_MAX_WIN 4
+#define TDM_WIN_CTRL_REG(win) ((TDM_REG_BASE + 0x4030) + (win<<4))
+#define TDM_WIN_BASE_REG(win) ((TDM_REG_BASE +0x4034) + (win<<4))
+
+/* TDM_WIN_CTRL_REG bits */
+#define TDM_WIN_ENABLE_OFFS 0
+#define TDM_WIN_ENABLE_MASK (1<<TDM_WIN_ENABLE_OFFS)
+#define TDM_WIN_ENABLE 1
+#define TDM_WIN_TARGET_OFFS 4
+#define TDM_WIN_TARGET_MASK (0xf<<TDM_WIN_TARGET_OFFS)
+#define TDM_WIN_ATTRIB_OFFS 8
+#define TDM_WIN_ATTRIB_MASK (0xff<<TDM_WIN_ATTRIB_OFFS)
+#define TDM_WIN_SIZE_OFFS 16
+#define TDM_WIN_SIZE_MASK (0xffff<<TDM_WIN_SIZE_OFFS)
+
+/* TDM_WIN_BASE_REG bits */
+#define TDM_BASE_OFFS 16
+#define TDM_BASE_MASK (0xffff<<TDM_BASE_OFFS)
+
+#endif /*__INCmvSysTdmh*/
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "ctrlEnv/sys/mvSysTs.h"
+
+
+typedef struct _mvTsuDecWin
+{
+ MV_TARGET target;
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+}MV_TSU_DEC_WIN;
+
+
+MV_TARGET tsuAddrDecPrioTap[] =
+{
+#if defined(MV_INCLUDE_PEX)
+ PEX0_MEM,
+#endif
+#if defined(MV_INCLUDE_PCI)
+ PCI0_MEM,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS0)
+ SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+ SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+ SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+ SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS0)
+ DEVICE_CS0,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS1)
+ DEVICE_CS1,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS2)
+ DEVICE_CS2,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS3)
+ DEVICE_CS3,
+#endif
+#if defined(MV_INCLUDE_PEX)
+ PEX0_IO,
+#endif
+#if defined(MV_INCLUDE_PCI)
+ PCI0_IO,
+#endif
+ TBL_TERM
+};
+
+static MV_STATUS tsuWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin);
+static MV_STATUS mvTsuWinSet(MV_U32 winNum, MV_TSU_DEC_WIN *pAddrDecWin);
+static MV_STATUS mvTsuWinGet(MV_U32 winNum, MV_TSU_DEC_WIN *pAddrDecWin);
+MV_STATUS mvTsuWinEnable(MV_U32 winNum,MV_BOOL enable);
+
+/*******************************************************************************
+* mvTsuWinInit
+*
+* DESCRIPTION:
+* Initialize the TSU unit address decode windows.
+*
+* INPUT:
+* None.
+* OUTPUT:
+* None.
+* RETURN:
+* MV_OK - on success,
+*
+*******************************************************************************/
+MV_STATUS mvTsuWinInit(void)
+{
+ MV_U32 winNum, status, winPrioIndex=0;
+ MV_TSU_DEC_WIN tsuWin;
+ MV_CPU_DEC_WIN cpuAddrDecWin;
+
+ /* First disable all address decode windows */
+ for(winNum = 0; winNum < TSU_MAX_DECODE_WIN; winNum++)
+ {
+ MV_REG_BIT_RESET(MV_TSU_WIN_CTRL_REG(winNum),
+ TSU_WIN_CTRL_EN_MASK);
+ }
+
+ /* Go through all windows in user table until table terminator */
+ for(winNum = 0; ((tsuAddrDecPrioTap[winPrioIndex] != TBL_TERM) &&
+ (winNum < TSU_MAX_DECODE_WIN));)
+ {
+ /* first get attributes from CPU If */
+ status = mvCpuIfTargetWinGet(tsuAddrDecPrioTap[winPrioIndex],
+ &cpuAddrDecWin);
+
+ if(MV_NO_SUCH == status)
+ {
+ winPrioIndex++;
+ continue;
+ }
+ if(MV_OK != status)
+ {
+ mvOsPrintf("mvTsuWinInit: ERR. mvCpuIfTargetWinGet failed\n");
+ return MV_ERROR;
+ }
+
+ if (cpuAddrDecWin.enable == MV_TRUE)
+ {
+ tsuWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+ tsuWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+ tsuWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+ tsuWin.enable = MV_TRUE;
+ tsuWin.target = tsuAddrDecPrioTap[winPrioIndex];
+
+ if(MV_OK != mvTsuWinSet(winNum, &tsuWin))
+ {
+ mvOsPrintf("mvTsuWinInit: ERR. mvTsuWinSet failed winNum=%d\n",
+ winNum);
+ return MV_ERROR;
+ }
+ winNum++;
+ }
+ winPrioIndex ++;
+ }
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvTsuWinSet
+*
+* DESCRIPTION:
+* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+* address window, also known as address decode window.
+* After setting this target window, the TSU will be able to access the
+* target within the address window.
+*
+* INPUT:
+* winNum - TSU to target address decode window number.
+* pAddrDecWin - TSU target window data structure.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR - if address window overlapps with other address decode
+* windows.
+* MV_BAD_PARAM - if base address is invalid parameter or target is
+* unknown.
+*
+*******************************************************************************/
+MV_STATUS mvTsuWinSet(MV_U32 winNum, MV_TSU_DEC_WIN *pAddrDecWin)
+{
+ MV_TARGET_ATTRIB targetAttribs;
+ MV_DEC_REGS decRegs;
+
+ /* Parameter checking */
+ if(winNum >= TSU_MAX_DECODE_WIN)
+ {
+ mvOsPrintf("mvTsuWinSet: ERR. Invalid win num %d\n",winNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check if the requested window overlapps with current windows */
+ if(MV_TRUE == tsuWinOverlapDetect(winNum, &pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("mvTsuWinSet: ERR. Window %d overlap\n", winNum);
+ return MV_ERROR;
+ }
+
+ /* check if address is aligned to the size */
+ if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow,pAddrDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvTsuWinSet: Error setting TSU window %d to target "
+ "%s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ winNum, mvCtrlTargetNameGet(pAddrDecWin->target),
+ pAddrDecWin->addrWin.baseLow,
+ pAddrDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+ decRegs.baseReg = MV_REG_READ(MV_TSU_WIN_BASE_REG(winNum));
+ decRegs.sizeReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum));
+
+ if(MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+ {
+ mvOsPrintf("mvTsuWinSet: mvCtrlAddrDecToReg Failed\n");
+ return MV_ERROR;
+ }
+
+ mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs);
+
+ /* set attributes */
+ decRegs.sizeReg &= ~TSU_WIN_CTRL_ATTR_MASK;
+ decRegs.sizeReg |= targetAttribs.attrib << TSU_WIN_CTRL_ATTR_OFFS;
+ /* set target ID */
+ decRegs.sizeReg &= ~TSU_WIN_CTRL_TARGET_MASK;
+ decRegs.sizeReg |= targetAttribs.targetId << TSU_WIN_CTRL_TARGET_OFFS;
+
+ /* for the safe side we disable the window before writing the new */
+ /* values */
+ mvTsuWinEnable(winNum, MV_FALSE);
+ MV_REG_WRITE(MV_TSU_WIN_CTRL_REG(winNum),decRegs.sizeReg);
+
+ /* Write to address decode Size Register */
+ MV_REG_WRITE(MV_TSU_WIN_BASE_REG(winNum), decRegs.baseReg);
+
+ /* Enable address decode target window */
+ if(pAddrDecWin->enable == MV_TRUE)
+ {
+ mvTsuWinEnable(winNum,MV_TRUE);
+ }
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvTsuWinGet
+*
+* DESCRIPTION:
+* Get TSU peripheral target address window.
+*
+* INPUT:
+* winNum - TSU to target address decode window number.
+*
+* OUTPUT:
+* pAddrDecWin - TSU target window data structure.
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvTsuWinGet(MV_U32 winNum, MV_TSU_DEC_WIN *pAddrDecWin)
+{
+ MV_DEC_REGS decRegs;
+ MV_TARGET_ATTRIB targetAttrib;
+
+ /* Parameter checking */
+ if(winNum >= TSU_MAX_DECODE_WIN)
+ {
+ mvOsPrintf("mvTsuWinGet: ERR. Invalid winNum %d\n", winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+ decRegs.baseReg = MV_REG_READ(MV_TSU_WIN_BASE_REG(winNum));
+ decRegs.sizeReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum));
+
+ if(MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin)))
+ {
+ mvOsPrintf("mvTsuWinGet: mvCtrlRegToAddrDec Failed \n");
+ return MV_ERROR;
+ }
+
+ /* attrib and targetId */
+ targetAttrib.attrib =
+ (decRegs.sizeReg & TSU_WIN_CTRL_ATTR_MASK) >> TSU_WIN_CTRL_ATTR_OFFS;
+ targetAttrib.targetId =
+ (decRegs.sizeReg & TSU_WIN_CTRL_TARGET_MASK) >> TSU_WIN_CTRL_TARGET_OFFS;
+
+ pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+ /* Check if window is enabled */
+ if((MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum)) & TSU_WIN_CTRL_EN_MASK))
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrDecWin->enable = MV_FALSE;
+ }
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvTsuWinEnable
+*
+* DESCRIPTION:
+* This function enable/disable a TSU to target address window.
+* According to parameter 'enable' the routine will enable the
+* window, thus enabling TSU accesses (before enabling the window it is
+* tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+* winNum - TSU to target address decode window number.
+* enable - Enable / disable parameter.
+*
+* OUTPUT:
+* N/A
+*
+* RETURN:
+* MV_ERROR if decode window number was wrong or enabled window overlapps.
+*
+*******************************************************************************/
+MV_STATUS mvTsuWinEnable(MV_U32 winNum,MV_BOOL enable)
+{
+ MV_TSU_DEC_WIN addrDecWin;
+
+ /* Parameter checking */
+ if(winNum >= TSU_MAX_DECODE_WIN)
+ {
+ mvOsPrintf("mvTsuWinEnable: ERR. Invalid winNum%d\n",winNum);
+ return MV_ERROR;
+ }
+
+ if(enable == MV_TRUE)
+ {
+ /* First check for overlap with other enabled windows */
+ /* Get current window. */
+ if(MV_OK != mvTsuWinGet(winNum,&addrDecWin))
+ {
+ mvOsPrintf("mvTsuWinEnable: ERR. targetWinGet fail\n");
+ return MV_ERROR;
+ }
+ /* Check for overlapping. */
+ if(MV_FALSE == tsuWinOverlapDetect(winNum,&(addrDecWin.addrWin)))
+ {
+ /* No Overlap. Enable address decode target window */
+ MV_REG_BIT_SET(MV_TSU_WIN_CTRL_REG(winNum),
+ TSU_WIN_CTRL_EN_MASK);
+ }
+ else
+ {
+ /* Overlap detected */
+ mvOsPrintf("mvTsuWinEnable: ERR. Overlap detected\n");
+ return MV_ERROR;
+ }
+ }
+ else
+ {
+ /* Disable address decode target window */
+ MV_REG_BIT_RESET(MV_TSU_WIN_CTRL_REG(winNum),
+ TSU_WIN_CTRL_EN_MASK);
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvTsuWinTargetGet
+*
+* DESCRIPTION:
+* Get Window number associated with target
+*
+* INPUT:
+* target - Target ID to get the window number for.
+* OUTPUT:
+*
+* RETURN:
+* window number or 0xFFFFFFFF on error.
+*
+*******************************************************************************/
+MV_U32 mvTsuWinTargetGet(MV_TARGET target)
+{
+ MV_TSU_DEC_WIN decWin;
+ MV_U32 winNum;
+
+ /* Check parameters */
+ if(target >= MAX_TARGETS)
+ {
+ mvOsPrintf("mvTsuWinTargetGet: target %d is Illigal\n", target);
+ return 0xffffffff;
+ }
+
+ for(winNum = 0; winNum < TSU_MAX_DECODE_WIN; winNum++)
+ {
+ if(mvTsuWinGet(winNum,&decWin) != MV_OK)
+ {
+ mvOsPrintf("mvTsuWinGet: window returned error\n");
+ return 0xffffffff;
+ }
+
+ if (decWin.enable == MV_TRUE)
+ {
+ if(decWin.target == target)
+ {
+ return winNum;
+ }
+ }
+ }
+ return 0xFFFFFFFF;
+}
+
+
+/*******************************************************************************
+* tsuWinOverlapDetect
+*
+* DESCRIPTION:
+* Detect TSU address windows overlapping
+* An unpredicted behaviur is expected in case TSU address decode
+* windows overlapps.
+* This function detects TSU address decode windows overlapping of a
+* specified window. The function does not check the window itself for
+* overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+* winNum - address decode window number.
+* pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlap current address
+* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data
+* from registers.
+*
+*******************************************************************************/
+static MV_STATUS tsuWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 ctrlReg;
+ MV_U32 winNumIndex;
+ MV_TSU_DEC_WIN addrDecWin;
+
+ for(winNumIndex = 0; winNumIndex < TSU_MAX_DECODE_WIN; winNumIndex++)
+ {
+ /* Do not check window itself */
+ if(winNumIndex == winNum)
+ {
+ continue;
+ }
+
+ /* Do not check disabled windows */
+ ctrlReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNumIndex));
+ if((ctrlReg & TSU_WIN_CTRL_EN_MASK) == 0)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvTsuWinGet(winNumIndex, &addrDecWin))
+ {
+ mvOsPrintf("tsuWinOverlapDetect: ERR. mvTsuWinGet failed\n");
+ return MV_ERROR;
+ }
+
+ if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+ {
+ return MV_TRUE;
+ }
+ }
+ return MV_FALSE;
+}
+
+
+/*******************************************************************************
+* mvTsuAddrDecShow
+*
+* DESCRIPTION:
+* Print the TSU address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+void mvTsuAddrDecShow(void)
+{
+ MV_TSU_DEC_WIN win;
+ int i;
+
+ if (MV_FALSE == mvCtrlPwrClckGet(TS_UNIT_ID, 0))
+ return;
+
+ mvOsOutput( "\n" );
+ mvOsOutput( "TSU:\n");
+ mvOsOutput( "----\n" );
+
+ for(i = 0; i < TSU_MAX_DECODE_WIN; i++)
+ {
+ memset(&win, 0, sizeof(TSU_MAX_DECODE_WIN));
+ mvOsOutput( "win%d - ", i );
+
+ if(mvTsuWinGet(i, &win ) == MV_OK )
+ {
+ if(win.enable == MV_TRUE)
+ {
+ mvOsOutput("%s base %08x, ",
+ mvCtrlTargetNameGet(win.target),
+ win.addrWin.baseLow);
+ mvOsOutput( "...." );
+ mvSizePrint(win.addrWin.size );
+ mvOsOutput( "\n" );
+ }
+ else
+ {
+ mvOsOutput( "disable\n" );
+ }
+ }
+ }
+ return;
+}
+
+
+/*******************************************************************************
+* mvTsuInit
+*
+* DESCRIPTION:
+* Initialize the TSU unit, and get unit out of reset.
+*
+* INPUT:
+* coreClock - The core clock at which the TSU should operate.
+* mode - The mode on configure the unit into (serial/parallel).
+* memHandle - Memory handle used for memory allocations.
+* OUTPUT:
+* None.
+* RETURN:
+* MV_OK - on success,
+*
+*******************************************************************************/
+MV_STATUS mvTsuInit(MV_TSU_CORE_CLOCK coreClock, MV_TSU_PORTS_MODE mode,
+ void *osHandle)
+{
+ MV_STATUS status;
+
+ status = mvTsuWinInit();
+ if(status == MV_OK)
+ status = mvTsuHalInit(coreClock,mode,osHandle);
+
+ return status;
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSysTsh
+#define __INCmvSysTsh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* includes */
+#include "ts/mvTsu.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+#define TSU_MAX_DECODE_WIN 4
+
+
+/*******************************************/
+/* TSU Windows Registers */
+/*******************************************/
+#define MV_TSU_WIN_CTRL_REG(win) (TSU_GLOBAL_REG_BASE +0x30 + 0x10 * win)
+#define MV_TSU_WIN_BASE_REG(win) (TSU_GLOBAL_REG_BASE +0x34 + 0x10 * win)
+
+/* TSU windows control register. */
+#define TSU_WIN_CTRL_EN_MASK (0x1 << 0)
+#define TSU_WIN_CTRL_TARGET_OFFS 4
+#define TSU_WIN_CTRL_TARGET_MASK (0xF << TSU_WIN_CTRL_TARGET_OFFS)
+#define TSU_WIN_CTRL_ATTR_OFFS 8
+#define TSU_WIN_CTRL_ATTR_MASK (0xFF << TSU_WIN_CTRL_ATTR_OFFS)
+#define TSU_WIN_CTRL_SIZE_OFFS 16
+#define TSU_WIN_CTRL_SIZE_MASK (0xFFFF << TSU_WIN_CTRL_SIZE_OFFS)
+
+/* TSU windows base register. */
+#define TSU_WIN_BASE_OFFS 16
+#define TSU_WIN_BASE_MASK (0xFFFF << TSU_WIN_BASE_OFFS)
+
+MV_STATUS mvTsuWinInit(void);
+
+void mvTsuAddrDecShow(void);
+MV_STATUS mvTsuInit(MV_TSU_CORE_CLOCK coreClock, MV_TSU_PORTS_MODE mode,
+ void *osHandle);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvTsh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "ctrlEnv/sys/mvSysUsb.h"
+
+MV_TARGET usbAddrDecPrioTab[] =
+{
+#if defined(MV_INCLUDE_SDRAM_CS0)
+ SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+ SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+ SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+ SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_CESA) && defined(USB_UNDERRUN_WA)
+ CRYPT_ENG,
+#endif
+#if defined(MV_INCLUDE_PEX)
+ PEX0_MEM,
+#endif
+ TBL_TERM
+};
+
+
+
+MV_STATUS mvUsbInit(int dev, MV_BOOL isHost)
+{
+ MV_STATUS status;
+
+ status = mvUsbWinInit(dev);
+ if(status != MV_OK)
+ return status;
+
+ return mvUsbHalInit(dev, isHost);
+}
+
+
+/*******************************************************************************
+* usbWinOverlapDetect - Detect USB address windows overlapping
+*
+* DESCRIPTION:
+* An unpredicted behaviur is expected in case USB address decode
+* windows overlapps.
+* This function detects USB address decode windows overlapping of a
+* specified window. The function does not check the window itself for
+* overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+* winNum - address decode window number.
+* pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlap current address
+* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data
+* from registers.
+*
+*******************************************************************************/
+static MV_STATUS usbWinOverlapDetect(int dev, MV_U32 winNum,
+ MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 winNumIndex;
+ MV_DEC_WIN addrDecWin;
+
+ for(winNumIndex=0; winNumIndex<MV_USB_MAX_ADDR_DECODE_WIN; winNumIndex++)
+ {
+ /* Do not check window itself */
+ if (winNumIndex == winNum)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvUsbWinGet(dev, winNumIndex, &addrDecWin))
+ {
+ mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ /* Do not check disabled windows */
+ if(addrDecWin.enable == MV_FALSE)
+ {
+ continue;
+ }
+
+ if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+ {
+ return MV_TRUE;
+ }
+ }
+ return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvUsbWinSet - Set USB target address window
+*
+* DESCRIPTION:
+* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+* address window, also known as address decode window.
+* After setting this target window, the USB will be able to access the
+* target within the address window.
+*
+* INPUT:
+* winNum - USB target address decode window number.
+* pAddrDecWin - USB target window data structure.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR if address window overlapps with other address decode windows.
+* MV_BAD_PARAM if base address is invalid parameter or target is
+* unknown.
+*
+*******************************************************************************/
+MV_STATUS mvUsbWinSet(int dev, MV_U32 winNum, MV_DEC_WIN *pDecWin)
+{
+ MV_DEC_WIN_PARAMS winParams;
+ MV_U32 sizeReg, baseReg;
+
+ /* Parameter checking */
+ if (winNum >= MV_USB_MAX_ADDR_DECODE_WIN)
+ {
+ mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check if the requested window overlapps with current windows */
+ if (MV_TRUE == usbWinOverlapDetect(dev, winNum, &pDecWin->addrWin))
+ {
+ mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum);
+ return MV_ERROR;
+ }
+
+ /* check if address is aligned to the size */
+ if(MV_IS_NOT_ALIGN(pDecWin->addrWin.baseLow, pDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvUsbWinSet:Error setting USB window %d to "\
+ "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ winNum,
+ mvCtrlTargetNameGet(pDecWin->target),
+ pDecWin->addrWin.baseLow,
+ pDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+ if(MV_OK != mvCtrlAddrDecToParams(pDecWin, &winParams))
+ {
+ mvOsPrintf("%s: mvCtrlAddrDecToParams Failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ /* set Size, Attributes and TargetID */
+ sizeReg = (((winParams.targetId << MV_USB_WIN_TARGET_OFFSET) & MV_USB_WIN_TARGET_MASK) |
+ ((winParams.attrib << MV_USB_WIN_ATTR_OFFSET) & MV_USB_WIN_ATTR_MASK) |
+ ((winParams.size << MV_USB_WIN_SIZE_OFFSET) & MV_USB_WIN_SIZE_MASK));
+
+#if defined(MV645xx) || defined(MV646xx)
+ /* If window is DRAM with HW cache coherency, make sure bit2 is set */
+ sizeReg &= ~MV_USB_WIN_BURST_WR_LIMIT_MASK;
+
+ if((MV_TARGET_IS_DRAM(pDecWin->target)) &&
+ (pDecWin->addrWinAttr.cachePolicy != NO_COHERENCY))
+ {
+ sizeReg |= MV_USB_WIN_BURST_WR_32BIT_LIMIT;
+ }
+ else
+ {
+ sizeReg |= MV_USB_WIN_BURST_WR_NO_LIMIT;
+ }
+#endif /* MV645xx || MV646xx */
+
+ if (pDecWin->enable == MV_TRUE)
+ {
+ sizeReg |= MV_USB_WIN_ENABLE_MASK;
+ }
+ else
+ {
+ sizeReg &= ~MV_USB_WIN_ENABLE_MASK;
+ }
+
+ /* Update Base value */
+ baseReg = (winParams.baseAddr & MV_USB_WIN_BASE_MASK);
+
+ MV_REG_WRITE( MV_USB_WIN_CTRL_REG(dev, winNum), sizeReg);
+ MV_REG_WRITE( MV_USB_WIN_BASE_REG(dev, winNum), baseReg);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvUsbWinGet - Get USB peripheral target address window.
+*
+* DESCRIPTION:
+* Get USB peripheral target address window.
+*
+* INPUT:
+* winNum - USB target address decode window number.
+*
+* OUTPUT:
+* pDecWin - USB target window data structure.
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvUsbWinGet(int dev, MV_U32 winNum, MV_DEC_WIN *pDecWin)
+{
+ MV_DEC_WIN_PARAMS winParam;
+ MV_U32 sizeReg, baseReg;
+
+ /* Parameter checking */
+ if (winNum >= MV_USB_MAX_ADDR_DECODE_WIN)
+ {
+ mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n",
+ __FUNCTION__, dev, winNum);
+ return MV_NOT_SUPPORTED;
+ }
+
+ baseReg = MV_REG_READ( MV_USB_WIN_BASE_REG(dev, winNum) );
+ sizeReg = MV_REG_READ( MV_USB_WIN_CTRL_REG(dev, winNum) );
+
+ /* Check if window is enabled */
+ if(sizeReg & MV_USB_WIN_ENABLE_MASK)
+ {
+ pDecWin->enable = MV_TRUE;
+
+ /* Extract window parameters from registers */
+ winParam.targetId = (sizeReg & MV_USB_WIN_TARGET_MASK) >> MV_USB_WIN_TARGET_OFFSET;
+ winParam.attrib = (sizeReg & MV_USB_WIN_ATTR_MASK) >> MV_USB_WIN_ATTR_OFFSET;
+ winParam.size = (sizeReg & MV_USB_WIN_SIZE_MASK) >> MV_USB_WIN_SIZE_OFFSET;
+ winParam.baseAddr = (baseReg & MV_USB_WIN_BASE_MASK);
+
+ /* Translate the decode window parameters to address decode struct */
+ if (MV_OK != mvCtrlParamsToAddrDec(&winParam, pDecWin))
+ {
+ mvOsPrintf("Failed to translate register parameters to USB address" \
+ " decode window structure\n");
+ return MV_ERROR;
+ }
+ }
+ else
+ {
+ pDecWin->enable = MV_FALSE;
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvUsbWinInit -
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+* MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvUsbWinInit(int dev)
+{
+ MV_STATUS status;
+ MV_DEC_WIN usbWin;
+ MV_CPU_DEC_WIN cpuAddrDecWin;
+ int winNum;
+ MV_U32 winPrioIndex = 0;
+
+ /* First disable all address decode windows */
+ for(winNum = 0; winNum < MV_USB_MAX_ADDR_DECODE_WIN; winNum++)
+ {
+ MV_REG_BIT_RESET(MV_USB_WIN_CTRL_REG(dev, winNum), MV_USB_WIN_ENABLE_MASK);
+ }
+
+ /* Go through all windows in user table until table terminator */
+ winNum = 0;
+ while( (usbAddrDecPrioTab[winPrioIndex] != TBL_TERM) &&
+ (winNum < MV_USB_MAX_ADDR_DECODE_WIN) )
+ {
+ /* first get attributes from CPU If */
+ status = mvCpuIfTargetWinGet(usbAddrDecPrioTab[winPrioIndex],
+ &cpuAddrDecWin);
+
+ if(MV_NO_SUCH == status)
+ {
+ winPrioIndex++;
+ continue;
+ }
+ if (MV_OK != status)
+ {
+ mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ if (cpuAddrDecWin.enable == MV_TRUE)
+ {
+ usbWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+ usbWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+ usbWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+ usbWin.enable = MV_TRUE;
+ usbWin.target = usbAddrDecPrioTab[winPrioIndex];
+
+#if defined(MV645xx) || defined(MV646xx)
+ /* Get the default attributes for that target window */
+ mvCtrlDefAttribGet(usbWin.target, &usbWin.addrWinAttr);
+#endif /* MV645xx || MV646xx */
+
+ if(MV_OK != mvUsbWinSet(dev, winNum, &usbWin))
+ {
+ return MV_ERROR;
+ }
+ winNum++;
+ }
+ winPrioIndex++;
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvUsbAddrDecShow - Print the USB address decode map.
+*
+* DESCRIPTION:
+* This function print the USB address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvUsbAddrDecShow(MV_VOID)
+{
+ MV_DEC_WIN addrDecWin;
+ int i, winNum;
+
+ mvOsOutput( "\n" );
+ mvOsOutput( "USB:\n" );
+ mvOsOutput( "----\n" );
+
+ for(i=0; i<mvCtrlUsbMaxGet(); i++)
+ {
+ mvOsOutput( "Device %d:\n", i);
+
+ for(winNum = 0; winNum < MV_USB_MAX_ADDR_DECODE_WIN; winNum++)
+ {
+ memset(&addrDecWin, 0, sizeof(MV_DEC_WIN) );
+
+ mvOsOutput( "win%d - ", winNum );
+
+ if( mvUsbWinGet(i, winNum, &addrDecWin ) == MV_OK )
+ {
+ if( addrDecWin.enable )
+ {
+ mvOsOutput( "%s base %08x, ",
+ mvCtrlTargetNameGet(addrDecWin.target), addrDecWin.addrWin.baseLow );
+
+ mvSizePrint( addrDecWin.addrWin.size );
+
+#if defined(MV645xx) || defined(MV646xx)
+ switch( addrDecWin.addrWinAttr.swapType)
+ {
+ case MV_BYTE_SWAP:
+ mvOsOutput( "BYTE_SWAP, " );
+ break;
+ case MV_NO_SWAP:
+ mvOsOutput( "NO_SWAP , " );
+ break;
+ case MV_BYTE_WORD_SWAP:
+ mvOsOutput( "BYTE_WORD_SWAP, " );
+ break;
+ case MV_WORD_SWAP:
+ mvOsOutput( "WORD_SWAP, " );
+ break;
+ default:
+ mvOsOutput( "SWAP N/A , " );
+ }
+
+ switch( addrDecWin.addrWinAttr.cachePolicy )
+ {
+ case NO_COHERENCY:
+ mvOsOutput( "NO_COHERENCY , " );
+ break;
+ case WT_COHERENCY:
+ mvOsOutput( "WT_COHERENCY , " );
+ break;
+ case WB_COHERENCY:
+ mvOsOutput( "WB_COHERENCY , " );
+ break;
+ default:
+ mvOsOutput( "COHERENCY N/A, " );
+ }
+
+ switch( addrDecWin.addrWinAttr.pcixNoSnoop )
+ {
+ case 0:
+ mvOsOutput( "PCI-X NS inactive, " );
+ break;
+ case 1:
+ mvOsOutput( "PCI-X NS active , " );
+ break;
+ default:
+ mvOsOutput( "PCI-X NS N/A , " );
+ }
+
+ switch( addrDecWin.addrWinAttr.p2pReq64 )
+ {
+ case 0:
+ mvOsOutput( "REQ64 force" );
+ break;
+ case 1:
+ mvOsOutput( "REQ64 detect" );
+ break;
+ default:
+ mvOsOutput( "REQ64 N/A" );
+ }
+#endif /* MV645xx || MV646xx */
+ mvOsOutput( "\n" );
+ }
+ else
+ mvOsOutput( "disable\n" );
+ }
+ }
+ }
+}
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSysUsbh
+#define __INCmvSysUsbh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* includes */
+#include "usb/mvUsb.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+#define MV_USB_MAX_ADDR_DECODE_WIN 4
+
+/*******************************************/
+/* USB Bridge Registers */
+/*******************************************/
+#define MV_USB_BRIDGE_CTRL_REG(dev) (USB_REG_BASE(dev) + 0x300)
+
+#define MV_USB_WIN_CTRL_REG(dev, win) (USB_REG_BASE(dev) + 0x320 + ((win)<<4))
+#define MV_USB_WIN_BASE_REG(dev, win) (USB_REG_BASE(dev) + 0x324 + ((win)<<4))
+
+/* BITs in Windows 0-3 Control and Base Registers */
+#define MV_USB_WIN_ENABLE_BIT 0
+#define MV_USB_WIN_ENABLE_MASK (1 << MV_USB_WIN_ENABLE_BIT)
+
+#define MV_USB_WIN_BURST_WR_LIMIT_BIT 1
+#define MV_USB_WIN_BURST_WR_LIMIT_MASK (1 << MV_USB_WIN_BURST_WR_LIMIT_BIT)
+#define MV_USB_WIN_BURST_WR_NO_LIMIT (0 << MV_USB_WIN_BURST_WR_LIMIT_BIT)
+#define MV_USB_WIN_BURST_WR_32BIT_LIMIT (1 << MV_USB_WIN_BURST_WR_LIMIT_BIT)
+
+#define MV_USB_WIN_TARGET_OFFSET 4
+#define MV_USB_WIN_TARGET_MASK (0xF << MV_USB_WIN_TARGET_OFFSET)
+
+#define MV_USB_WIN_ATTR_OFFSET 8
+#define MV_USB_WIN_ATTR_MASK (0xFF << MV_USB_WIN_ATTR_OFFSET)
+
+#define MV_USB_WIN_SIZE_OFFSET 16
+#define MV_USB_WIN_SIZE_MASK (0xFFFF << MV_USB_WIN_SIZE_OFFSET)
+
+#define MV_USB_WIN_BASE_OFFSET 16
+#define MV_USB_WIN_BASE_MASK (0xFFFF << MV_USB_WIN_BASE_OFFSET)
+
+
+#define MV_USB_BRIDGE_IPG_REG(dev) (USB_REG_BASE(dev) + 0x360)
+
+
+MV_STATUS mvUsbInit(int dev, MV_BOOL isHost);
+
+MV_STATUS mvUsbWinInit(int dev);
+MV_STATUS mvUsbWinSet(int dev, MV_U32 winNum, MV_DEC_WIN *pAddrWin);
+MV_STATUS mvUsbWinGet(int dev, MV_U32 winNum, MV_DEC_WIN *pAddrWin);
+
+void mvUsbAddrDecShow(void);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvUsbh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "xor/mvXor.h"
+#include "mvSysXor.h"
+
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+
+static MV_STATUS xorWinOverlapDetect(MV_U32 unit,MV_U32 winNum, MV_ADDR_WIN *pAddrWin);
+
+MV_TARGET xorAddrDecPrioTap[] =
+{
+#if defined(MV_INCLUDE_DEVICE_CS0)
+ DEVICE_CS0,
+#endif
+#if defined(MV_INCLUDE_PEX)
+ PEX0_MEM,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS0)
+ SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+ SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+ SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+ SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS1)
+ DEVICE_CS1,
+#endif
+#if defined(MV_INCLUDE_CESA)
+ CRYPT_ENG,
+#endif
+ TBL_TERM
+};
+static MV_STATUS mvXorInitWinsUnit (MV_U32 unit)
+{
+ MV_U32 winNum;
+ MV_XOR_DEC_WIN addrDecWin;
+ MV_CPU_DEC_WIN cpuAddrDecWin;
+ MV_U32 status;
+ MV_U32 winPrioIndex=0;
+
+ /* Initiate XOR address decode */
+
+ /* First disable all address decode windows */
+ for(winNum = 0; winNum < XOR_MAX_ADDR_DEC_WIN; winNum++)
+ {
+ mvXorTargetWinEnable(unit,winNum, MV_FALSE);
+ }
+
+ /* Go through all windows in user table until table terminator */
+ for (winNum = 0; ((xorAddrDecPrioTap[winPrioIndex] != TBL_TERM) &&
+ (winNum < XOR_MAX_ADDR_DEC_WIN));)
+ {
+ /* first get attributes from CPU If */
+ status = mvCpuIfTargetWinGet(xorAddrDecPrioTap[winPrioIndex],
+ &cpuAddrDecWin);
+
+ if(MV_NO_SUCH == status)
+ {
+ winPrioIndex++;
+ continue;
+ }
+ if (MV_OK != status)
+ {
+ mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+
+ if (cpuAddrDecWin.enable == MV_TRUE)
+ {
+
+ addrDecWin.target = xorAddrDecPrioTap[winPrioIndex];
+ addrDecWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+ addrDecWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+ addrDecWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+ addrDecWin.enable = MV_TRUE;
+
+ if (MV_OK != mvXorTargetWinSet(unit,winNum, &addrDecWin))
+ {
+ DB(mvOsPrintf("mvXorInit: ERR. mvDmaTargetWinSet failed\n"));
+ return MV_ERROR;
+ }
+ winNum++;
+ }
+ winPrioIndex++;
+
+ }
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvXorInit - Initialize XOR engine
+*
+* DESCRIPTION:
+* This function initialize XOR unit. It set the default address decode
+* windows of the unit.
+* Note that if the address window is disabled in xorAddrDecMap, the
+* window parameters will be set but the window will remain disabled.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*******************************************************************************/
+MV_STATUS mvXorInit (MV_VOID)
+{
+ MV_U32 i;
+
+ /* Initiate XOR address decode */
+ for(i = 0; i < MV_XOR_MAX_UNIT; i++)
+ mvXorInitWinsUnit(i);
+
+ mvXorHalInit(MV_XOR_MAX_CHAN);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvXorTargetWinSet - Set XOR target address window
+*
+* DESCRIPTION:
+* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+* address window. After setting this target window, the XOR will be
+* able to access the target within the address window.
+*
+* INPUT:
+* winNum - One of the possible XOR memory decode windows.
+* target - Peripheral target enumerator.
+* base - Window base address.
+* size - Window size.
+* enable - Window enable/disable.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvXorTargetWinSet(MV_U32 unit, MV_U32 winNum, MV_XOR_DEC_WIN *pAddrDecWin)
+{
+ MV_DEC_REGS xorDecRegs;
+ MV_TARGET_ATTRIB targetAttribs;
+ MV_U32 chan;
+
+ /* Parameter checking */
+ if (winNum >= XOR_MAX_ADDR_DEC_WIN)
+ {
+ DB(mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum));
+ return MV_BAD_PARAM;
+ }
+ if (pAddrDecWin == NULL)
+ {
+ DB(mvOsPrintf("%s: ERR. pAddrDecWin is NULL pointer\n", __FUNCTION__ ));
+ return MV_BAD_PTR;
+ }
+ /* Check if the requested window overlaps with current windows */
+ if (MV_TRUE == xorWinOverlapDetect(unit, winNum, &pAddrDecWin->addrWin))
+ {
+ DB(mvOsPrintf("%s: ERR. Window %d overlap\n",__FUNCTION__,winNum));
+ return MV_ERROR;
+ }
+
+ xorDecRegs.baseReg = MV_REG_READ(XOR_BASE_ADDR_REG(unit,winNum));
+ xorDecRegs.sizeReg = MV_REG_READ(XOR_SIZE_MASK_REG(unit,winNum));
+
+ /* Get Base Address and size registers values */
+ if(MV_OK != mvCtrlAddrDecToReg(&pAddrDecWin->addrWin, &xorDecRegs))
+ {
+ DB(mvOsPrintf("%s: ERR. Invalid addr dec window\n",__FUNCTION__));
+ return MV_BAD_PARAM;
+ }
+
+
+ mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs);
+
+ /* set attributes */
+ xorDecRegs.baseReg &= ~XEBARX_ATTR_MASK;
+ xorDecRegs.baseReg |= targetAttribs.attrib << XEBARX_ATTR_OFFS;
+ /* set target ID */
+ xorDecRegs.baseReg &= ~XEBARX_TARGET_MASK;
+ xorDecRegs.baseReg |= targetAttribs.targetId << XEBARX_TARGET_OFFS;
+
+
+ /* Write to address decode Base Address Register */
+ MV_REG_WRITE(XOR_BASE_ADDR_REG(unit,winNum), xorDecRegs.baseReg);
+
+ /* Write to Size Register */
+ MV_REG_WRITE(XOR_SIZE_MASK_REG(unit,winNum), xorDecRegs.sizeReg);
+
+ for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++)
+ {
+ if (pAddrDecWin->enable)
+ {
+ MV_REG_BIT_SET(XOR_WINDOW_CTRL_REG(unit,chan),
+ XEXWCR_WIN_EN_MASK(winNum));
+ }
+ else
+ {
+ MV_REG_BIT_RESET(XOR_WINDOW_CTRL_REG(unit,chan),
+ XEXWCR_WIN_EN_MASK(winNum));
+ }
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvXorTargetWinGet - Get xor peripheral target address window.
+*
+* DESCRIPTION:
+* Get xor peripheral target address window.
+*
+* INPUT:
+* winNum - One of the possible XOR memory decode windows.
+*
+* OUTPUT:
+* base - Window base address.
+* size - Window size.
+* enable - window enable/disable.
+*
+* RETURN:
+* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvXorTargetWinGet(MV_U32 unit,MV_U32 winNum, MV_XOR_DEC_WIN *pAddrDecWin)
+{
+ MV_DEC_REGS xorDecRegs;
+ MV_TARGET_ATTRIB targetAttrib;
+ MV_U32 chan=0,chanWinEn;
+
+ /* Parameter checking */
+ if (winNum >= XOR_MAX_ADDR_DEC_WIN)
+ {
+ DB(mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__ , winNum));
+ return MV_ERROR;
+ }
+
+ if (NULL == pAddrDecWin)
+ {
+ DB(mvOsPrintf("%s: ERR. pAddrDecWin is NULL pointer\n", __FUNCTION__ ));
+ return MV_BAD_PTR;
+ }
+
+ chanWinEn = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,0)) & XEXWCR_WIN_EN_MASK(winNum);
+
+ for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) /* we should scan here all channels per unit */
+ {
+ /* Check if enable bit is equal for all channels */
+ if ((MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan)) &
+ XEXWCR_WIN_EN_MASK(winNum)) != chanWinEn)
+ {
+ mvOsPrintf("%s: ERR. Window enable field must be equal in "
+ "all channels(chan=%d)\n",__FUNCTION__, chan);
+ return MV_ERROR;
+ }
+ }
+
+
+
+ xorDecRegs.baseReg = MV_REG_READ(XOR_BASE_ADDR_REG(unit,winNum));
+ xorDecRegs.sizeReg = MV_REG_READ(XOR_SIZE_MASK_REG(unit,winNum));
+
+ if (MV_OK != mvCtrlRegToAddrDec(&xorDecRegs, &pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("%s: ERR. mvCtrlRegToAddrDec failed\n", __FUNCTION__);
+ return MV_ERROR;
+ }
+
+ /* attrib and targetId */
+ targetAttrib.attrib =
+ (xorDecRegs.baseReg & XEBARX_ATTR_MASK) >> XEBARX_ATTR_OFFS;
+ targetAttrib.targetId =
+ (xorDecRegs.baseReg & XEBARX_TARGET_MASK) >> XEBARX_TARGET_OFFS;
+
+
+ pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+ if(chanWinEn)
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else pAddrDecWin->enable = MV_FALSE;
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvXorTargetWinEnable - Enable/disable a Xor address decode window
+*
+* DESCRIPTION:
+* This function enable/disable a XOR address decode window.
+* if parameter 'enable' == MV_TRUE the routine will enable the
+* window, thus enabling XOR accesses (before enabling the window it is
+* tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+* winNum - Decode window number.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvXorTargetWinEnable(MV_U32 unit,MV_U32 winNum, MV_BOOL enable)
+{
+ MV_XOR_DEC_WIN addrDecWin;
+ MV_U32 chan;
+
+ /* Parameter checking */
+ if (winNum >= XOR_MAX_ADDR_DEC_WIN)
+ {
+ DB(mvOsPrintf("%s: ERR. Invalid winNum%d\n", __FUNCTION__, winNum));
+ return MV_ERROR;
+ }
+
+ if (enable == MV_TRUE)
+ {
+ /* Get current window */
+ if (MV_OK != mvXorTargetWinGet(unit,winNum, &addrDecWin))
+ {
+ DB(mvOsPrintf("%s: ERR. targetWinGet fail\n", __FUNCTION__));
+ return MV_ERROR;
+ }
+
+ /* Check for overlapping */
+ if (MV_TRUE == xorWinOverlapDetect(unit,winNum, &(addrDecWin.addrWin)))
+ {
+ /* Overlap detected */
+ DB(mvOsPrintf("%s: ERR. Overlap detected\n", __FUNCTION__));
+ return MV_ERROR;
+ }
+
+ /* No Overlap. Enable address decode target window */
+ for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++)
+ {
+ MV_REG_BIT_SET(XOR_WINDOW_CTRL_REG(unit,chan),
+ XEXWCR_WIN_EN_MASK(winNum));
+ }
+
+ }
+ else
+ {
+ /* Disable address decode target window */
+
+ for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++)
+ {
+ MV_REG_BIT_RESET(XOR_WINDOW_CTRL_REG(unit,chan),
+ XEXWCR_WIN_EN_MASK(winNum));
+ }
+
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvXorSetProtWinSet - Configure access attributes of a XOR engine
+* to one of the XOR memory windows.
+*
+* DESCRIPTION:
+* Each engine can be configured with access attributes for each of the
+* memory spaces. This function sets access attributes
+* to a given window for the given engine
+*
+* INPUTS:
+* chan - One of the possible engines.
+* winNum - One of the possible XOR memory spaces.
+* access - Protection access rights.
+* write - Write rights.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvXorProtWinSet (MV_U32 unit,MV_U32 chan, MV_U32 winNum, MV_BOOL access,
+ MV_BOOL write)
+{
+ MV_U32 temp;
+
+ /* Parameter checking */
+ if (chan >= MV_XOR_MAX_CHAN_PER_UNIT)
+ {
+ DB(mvOsPrintf("%s: ERR. Invalid chan num %d\n", __FUNCTION__ , chan));
+ return MV_BAD_PARAM;
+ }
+ if (winNum >= XOR_MAX_ADDR_DEC_WIN)
+ {
+ DB(mvOsPrintf("%s: ERR. Invalid win num %d\n", __FUNCTION__, winNum));
+ return MV_BAD_PARAM;
+ }
+
+ temp = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan)) &
+ (~XEXWCR_WIN_ACC_MASK(winNum));
+
+ /* if access is disable */
+ if (!access)
+ {
+ /* disable access */
+ temp |= XEXWCR_WIN_ACC_NO_ACC(winNum);
+ }
+ /* if access is enable */
+ else
+ {
+ /* if write is enable */
+ if (write)
+ {
+ /* enable write */
+ temp |= XEXWCR_WIN_ACC_RW(winNum);
+ }
+ /* if write is disable */
+ else
+ {
+ /* disable write */
+ temp |= XEXWCR_WIN_ACC_RO(winNum);
+ }
+ }
+ MV_REG_WRITE(XOR_WINDOW_CTRL_REG(unit,chan),temp);
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvXorPciRemap - Set XOR remap register for PCI address windows.
+*
+* DESCRIPTION:
+* only Windows 0-3 can be remapped.
+*
+* INPUT:
+* winNum - window number
+* pAddrDecWin - pointer to address space window structure
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvXorPciRemap(MV_U32 unit,MV_U32 winNum, MV_U32 addrHigh)
+{
+ /* Parameter checking */
+ if (winNum >= XOR_MAX_REMAP_WIN)
+ {
+ DB(mvOsPrintf("%s: ERR. Invalid win num %d\n", __FUNCTION__, winNum));
+ return MV_BAD_PARAM;
+ }
+
+ MV_REG_WRITE(XOR_HIGH_ADDR_REMAP_REG(unit,winNum), addrHigh);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* xorWinOverlapDetect - Detect XOR address windows overlaping
+*
+* DESCRIPTION:
+* An unpredicted behaviour is expected in case XOR address decode
+* windows overlaps.
+* This function detects XOR address decode windows overlaping of a
+* specified window. The function does not check the window itself for
+* overlaping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+* winNum - address decode window number.
+* pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlap current address
+* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data
+* from registers.
+*
+*******************************************************************************/
+static MV_STATUS xorWinOverlapDetect(MV_U32 unit,MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+ MV_U32 baseAddrEnableReg;
+ MV_U32 winNumIndex,chan;
+ MV_XOR_DEC_WIN addrDecWin;
+
+ if (pAddrWin == NULL)
+ {
+ DB(mvOsPrintf("%s: ERR. pAddrWin is NULL pointer\n", __FUNCTION__ ));
+ return MV_BAD_PTR;
+ }
+
+ for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++)
+ {
+ /* Read base address enable register. Do not check disabled windows */
+ baseAddrEnableReg = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan));
+
+ for (winNumIndex = 0; winNumIndex < XOR_MAX_ADDR_DEC_WIN; winNumIndex++)
+ {
+ /* Do not check window itself */
+ if (winNumIndex == winNum)
+ {
+ continue;
+ }
+
+ /* Do not check disabled windows */
+ if ((baseAddrEnableReg & XEXWCR_WIN_EN_MASK(winNumIndex)) == 0)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvXorTargetWinGet(unit,winNumIndex, &addrDecWin))
+ {
+ DB(mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__ ));
+ return MV_ERROR;
+ }
+
+ if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+ {
+ return MV_TRUE;
+ }
+ }
+ }
+
+ return MV_FALSE;
+}
+
+static MV_VOID mvXorAddrDecShowUnit(MV_U32 unit)
+{
+ MV_XOR_DEC_WIN win;
+ int i;
+
+ mvOsOutput( "\n" );
+ mvOsOutput( "XOR %d:\n", unit );
+ mvOsOutput( "----\n" );
+
+ for( i = 0; i < XOR_MAX_ADDR_DEC_WIN; i++ )
+ {
+ memset( &win, 0, sizeof(MV_XOR_DEC_WIN) );
+
+ mvOsOutput( "win%d - ", i );
+
+ if( mvXorTargetWinGet(unit, i, &win ) == MV_OK )
+ {
+ if( win.enable )
+ {
+ mvOsOutput( "%s base %x, ",
+ mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+
+ mvSizePrint( win.addrWin.size );
+
+ mvOsOutput( "\n" );
+ }
+ else
+ mvOsOutput( "disable\n" );
+ }
+ }
+}
+
+/*******************************************************************************
+* mvXorAddrDecShow - Print the XOR address decode map.
+*
+* DESCRIPTION:
+* This function print the XOR address decode map.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID mvXorAddrDecShow(MV_VOID)
+{
+ int i;
+
+ for( i = 0; i < MV_XOR_MAX_UNIT; i++ )
+ mvXorAddrDecShowUnit(i);
+
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCMVSysXorh
+#define __INCMVSysXorh
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+#define XOR_MAX_ADDR_DEC_WIN 8 /* Maximum address decode windows */
+#define XOR_MAX_REMAP_WIN 4 /* Maximum address arbiter windows */
+
+/* XOR Engine Address Decoding Register Map */
+#define XOR_WINDOW_CTRL_REG(unit,chan) (XOR_UNIT_BASE(unit)+(0x240 + ((chan) * 4)))
+#define XOR_BASE_ADDR_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x250 + ((winNum) * 4)))
+#define XOR_SIZE_MASK_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x270 + ((winNum) * 4)))
+#define XOR_HIGH_ADDR_REMAP_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x290 + ((winNum) * 4)))
+
+/* XOR Engine [0..1] Window Control Registers (XExWCR) */
+#define XEXWCR_WIN_EN_OFFS(winNum) (winNum)
+#define XEXWCR_WIN_EN_MASK(winNum) (1 << (XEXWCR_WIN_EN_OFFS(winNum)))
+#define XEXWCR_WIN_EN_ENABLE(winNum) (1 << (XEXWCR_WIN_EN_OFFS(winNum)))
+#define XEXWCR_WIN_EN_DISABLE(winNum) (0 << (XEXWCR_WIN_EN_OFFS(winNum)))
+
+#define XEXWCR_WIN_ACC_OFFS(winNum) ((2 * winNum) + 16)
+#define XEXWCR_WIN_ACC_MASK(winNum) (3 << (XEXWCR_WIN_ACC_OFFS(winNum)))
+#define XEXWCR_WIN_ACC_NO_ACC(winNum) (0 << (XEXWCR_WIN_ACC_OFFS(winNum)))
+#define XEXWCR_WIN_ACC_RO(winNum) (1 << (XEXWCR_WIN_ACC_OFFS(winNum)))
+#define XEXWCR_WIN_ACC_RW(winNum) (3 << (XEXWCR_WIN_ACC_OFFS(winNum)))
+
+/* XOR Engine Base Address Registers (XEBARx) */
+#define XEBARX_TARGET_OFFS (0)
+#define XEBARX_TARGET_MASK (0xF << XEBARX_TARGET_OFFS)
+#define XEBARX_ATTR_OFFS (8)
+#define XEBARX_ATTR_MASK (0xFF << XEBARX_ATTR_OFFS)
+#define XEBARX_BASE_OFFS (16)
+#define XEBARX_BASE_MASK (0xFFFF << XEBARX_BASE_OFFS)
+
+/* XOR Engine Size Mask Registers (XESMRx) */
+#define XESMRX_SIZE_MASK_OFFS (16)
+#define XESMRX_SIZE_MASK_MASK (0xFFFF << XESMRX_SIZE_MASK_OFFS)
+
+/* XOR Engine High Address Remap Register (XEHARRx1) */
+#define XEHARRX_REMAP_OFFS (0)
+#define XEHARRX_REMAP_MASK (0xFFFFFFFF << XEHARRX_REMAP_OFFS)
+
+typedef struct _mvXorDecWin
+{
+ MV_TARGET target;
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+
+}MV_XOR_DEC_WIN;
+
+MV_STATUS mvXorInit (MV_VOID);
+MV_STATUS mvXorTargetWinSet(MV_U32 unit, MV_U32 winNum,
+ MV_XOR_DEC_WIN *pAddrDecWin);
+MV_STATUS mvXorTargetWinGet(MV_U32 unit, MV_U32 winNum,
+ MV_XOR_DEC_WIN *pAddrDecWin);
+MV_STATUS mvXorTargetWinEnable(MV_U32 unit,
+ MV_U32 winNum, MV_BOOL enable);
+MV_STATUS mvXorProtWinSet (MV_U32 unit,MV_U32 chan, MV_U32 winNum, MV_BOOL access,
+ MV_BOOL write);
+MV_STATUS mvXorPciRemap(MV_U32 unit, MV_U32 winNum, MV_U32 addrHigh);
+
+MV_VOID mvXorAddrDecShow(MV_VOID);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "device/mvDevice.h"
+
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDeviceH
+#define __INCmvDeviceH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "device/mvDeviceRegs.h"
+
+
+#endif /* #ifndef __INCmvDeviceH */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDeviceRegsH
+#define __INCmvDeviceRegsH
+
+#ifndef MV_ASMLANGUAGE
+#include "ctrlEnv/mvCtrlEnvLib.h"
+/* This enumerator describes the Marvell controller possible devices that */
+/* can be connected to its device interface. */
+typedef enum _mvDevice
+{
+#if defined(MV_INCLUDE_DEVICE_CS0)
+ DEV_CS0 = 0, /* Device connected to dev CS[0] */
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS1)
+ DEV_CS1 = 1, /* Device connected to dev CS[1] */
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS2)
+ DEV_CS2 = 2, /* Device connected to dev CS[2] */
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS3)
+ DEV_CS3 = 3, /* Device connected to dev CS[2] */
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS4)
+ DEV_CS4 = 4, /* Device connected to BOOT dev */
+#endif
+ MV_DEV_MAX_CS = MV_DEVICE_MAX_CS
+}MV_DEVICE;
+
+
+#endif /* MV_ASMLANGUAGE */
+
+
+#define NAND_CTRL_REG 0x10470
+
+#define NAND_ACTCEBOOT_BIT BIT1
+
+
+#endif /* #ifndef __INCmvDeviceRegsH */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+*******************************************************************************/
+/*******************************************************************************
+* mvOsCpuArchLib.c - Marvell CPU architecture library
+*
+* DESCRIPTION:
+* This library introduce Marvell API for OS dependent CPU architecture
+* APIs. This library introduce single CPU architecture services APKI
+* cross OS.
+*
+* DEPENDENCIES:
+* None.
+*
+*******************************************************************************/
+
+/* includes */
+#include <asm/processor.h>
+#include "mvOs.h"
+
+static MV_U32 read_p15_c0 (void);
+
+/* defines */
+#define ARM_ID_REVISION_OFFS 0
+#define ARM_ID_REVISION_MASK (0xf << ARM_ID_REVISION_OFFS)
+
+#define ARM_ID_PART_NUM_OFFS 4
+#define ARM_ID_PART_NUM_MASK (0xfff << ARM_ID_PART_NUM_OFFS)
+
+#define ARM_ID_ARCH_OFFS 16
+#define ARM_ID_ARCH_MASK (0xf << ARM_ID_ARCH_OFFS)
+
+#define ARM_ID_VAR_OFFS 20
+#define ARM_ID_VAR_MASK (0xf << ARM_ID_VAR_OFFS)
+
+#define ARM_ID_ASCII_OFFS 24
+#define ARM_ID_ASCII_MASK (0xff << ARM_ID_ASCII_OFFS)
+
+
+
+void* mvOsIoCachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr,
+ MV_U32 *memHandle)
+{
+ void *p = kmalloc( size, GFP_KERNEL );
+ *pPhyAddr = pci_map_single( osHandle, p, 0, PCI_DMA_BIDIRECTIONAL );
+ return p;
+}
+void* mvOsIoUncachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr,
+ MV_U32 *memHandle)
+{
+ return pci_alloc_consistent( osHandle, size, (dma_addr_t *)pPhyAddr );
+}
+
+void mvOsIoUncachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr,
+ MV_U32 memHandle)
+{
+ return pci_free_consistent( osHandle, size, pVirtAddr, (dma_addr_t)phyAddr );
+}
+
+void mvOsIoCachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr,
+ MV_U32 memHandle )
+{
+ return kfree( pVirtAddr );
+}
+
+int mvOsRand(void)
+{
+ int rand;
+ get_random_bytes(&rand, sizeof(rand) );
+ return rand;
+}
+
+/*******************************************************************************
+* mvOsCpuVerGet() -
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit CPU Revision
+*
+*******************************************************************************/
+MV_U32 mvOsCpuRevGet( MV_VOID )
+{
+ return ((read_p15_c0() & ARM_ID_REVISION_MASK ) >> ARM_ID_REVISION_OFFS);
+}
+/*******************************************************************************
+* mvOsCpuPartGet() -
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit CPU Part number
+*
+*******************************************************************************/
+MV_U32 mvOsCpuPartGet( MV_VOID )
+{
+ return ((read_p15_c0() & ARM_ID_PART_NUM_MASK ) >> ARM_ID_PART_NUM_OFFS);
+}
+/*******************************************************************************
+* mvOsCpuArchGet() -
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit CPU Architicture number
+*
+*******************************************************************************/
+MV_U32 mvOsCpuArchGet( MV_VOID )
+{
+ return ((read_p15_c0() & ARM_ID_ARCH_MASK ) >> ARM_ID_ARCH_OFFS);
+}
+/*******************************************************************************
+* mvOsCpuVarGet() -
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit CPU Variant number
+*
+*******************************************************************************/
+MV_U32 mvOsCpuVarGet( MV_VOID )
+{
+ return ((read_p15_c0() & ARM_ID_VAR_MASK ) >> ARM_ID_VAR_OFFS);
+}
+/*******************************************************************************
+* mvOsCpuAsciiGet() -
+*
+* DESCRIPTION:
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit CPU Variant number
+*
+*******************************************************************************/
+MV_U32 mvOsCpuAsciiGet( MV_VOID )
+{
+ return ((read_p15_c0() & ARM_ID_ASCII_MASK ) >> ARM_ID_ASCII_OFFS);
+}
+
+
+
+/*
+static unsigned long read_p15_c0 (void)
+*/
+/* read co-processor 15, register #0 (ID register) */
+static MV_U32 read_p15_c0 (void)
+{
+ MV_U32 value;
+
+ __asm__ __volatile__(
+ "mrc p15, 0, %0, c0, c0, 0 @ read control reg\n"
+ : "=r" (value)
+ :
+ : "memory");
+
+ return value;
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+*******************************************************************************/
+#ifndef _MV_OS_LNX_H_
+#define _MV_OS_LNX_H_
+
+
+#ifdef __KERNEL__
+/* for kernel space */
+#include <linux/autoconf.h>
+#include <linux/interrupt.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/hardirq.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+
+#include <linux/random.h>
+
+#include "dbg-trace.h"
+
+extern void mv_early_printk(char *fmt,...);
+
+#define MV_ASM __asm__ __volatile__
+#define INLINE inline
+#define MV_TRC_REC TRC_REC
+#define mvOsPrintf printk
+#define mvOsEarlyPrintf mv_early_printk
+#define mvOsOutput printk
+#define mvOsSPrintf sprintf
+#define mvOsMalloc(_size_) kmalloc(_size_,GFP_ATOMIC)
+#define mvOsFree kfree
+#define mvOsMemcpy memcpy
+#define mvOsSleep(_mils_) mdelay(_mils_)
+#define mvOsTaskLock()
+#define mvOsTaskUnlock()
+#define strtol simple_strtoul
+#define mvOsDelay(x) mdelay(x)
+#define mvOsUDelay(x) udelay(x)
+#define mvCopyFromOs copy_from_user
+#define mvCopyToOs copy_to_user
+
+
+#include "mvTypes.h"
+#include "mvCommon.h"
+
+#ifdef MV_NDEBUG
+#define mvOsAssert(cond)
+#else
+#define mvOsAssert(cond) { do { if(!(cond)) { BUG(); } }while(0); }
+#endif /* MV_NDEBUG */
+
+#else /* __KERNEL__ */
+
+/* for user space applications */
+#include <stdlib.h>
+#include <stdio.h>
+#include <assert.h>
+#include <string.h>
+
+#define INLINE inline
+#define mvOsPrintf printf
+#define mvOsOutput printf
+#define mvOsMalloc(_size_) malloc(_size_)
+#define mvOsFree free
+#define mvOsAssert(cond) assert(cond)
+
+#endif /* __KERNEL__ */
+#define mvOsIoVirtToPhy(pDev, pVirtAddr) \
+ pci_map_single( (pDev), (pVirtAddr), 0, PCI_DMA_BIDIRECTIONAL )
+
+#define mvOsCacheClear(pDev, p, size ) \
+ pci_map_single( (pDev), (p), (size), PCI_DMA_BIDIRECTIONAL)
+
+#define mvOsCacheFlush(pDev, p, size ) \
+ pci_map_single( (pDev), (p), (size), PCI_DMA_TODEVICE)
+
+#define mvOsCacheInvalidate(pDev, p, size) \
+ pci_map_single( (pDev), (p), (size), PCI_DMA_FROMDEVICE )
+
+#define mvOsCacheUnmap(pDev, phys, size) \
+ pci_unmap_single( (pDev), (dma_addr_t)(phys), (size), PCI_DMA_FROMDEVICE )
+
+
+#define CPU_PHY_MEM(x) (MV_U32)x
+#define CPU_MEMIO_CACHED_ADDR(x) (void*)x
+#define CPU_MEMIO_UNCACHED_ADDR(x) (void*)x
+
+
+/* CPU architecture dependent 32, 16, 8 bit read/write IO addresses */
+#define MV_MEMIO32_WRITE(addr, data) \
+ ((*((volatile unsigned int*)(addr))) = ((unsigned int)(data)))
+
+#define MV_MEMIO32_READ(addr) \
+ ((*((volatile unsigned int*)(addr))))
+
+#define MV_MEMIO16_WRITE(addr, data) \
+ ((*((volatile unsigned short*)(addr))) = ((unsigned short)(data)))
+
+#define MV_MEMIO16_READ(addr) \
+ ((*((volatile unsigned short*)(addr))))
+
+#define MV_MEMIO8_WRITE(addr, data) \
+ ((*((volatile unsigned char*)(addr))) = ((unsigned char)(data)))
+
+#define MV_MEMIO8_READ(addr) \
+ ((*((volatile unsigned char*)(addr))))
+
+
+/* No Fast Swap implementation (in assembler) for ARM */
+#define MV_32BIT_LE_FAST(val) MV_32BIT_LE(val)
+#define MV_16BIT_LE_FAST(val) MV_16BIT_LE(val)
+#define MV_32BIT_BE_FAST(val) MV_32BIT_BE(val)
+#define MV_16BIT_BE_FAST(val) MV_16BIT_BE(val)
+
+/* 32 and 16 bit read/write in big/little endian mode */
+
+/* 16bit write in little endian mode */
+#define MV_MEMIO_LE16_WRITE(addr, data) \
+ MV_MEMIO16_WRITE(addr, MV_16BIT_LE_FAST(data))
+
+/* 16bit read in little endian mode */
+static __inline MV_U16 MV_MEMIO_LE16_READ(MV_U32 addr)
+{
+ MV_U16 data;
+
+ data= (MV_U16)MV_MEMIO16_READ(addr);
+
+ return (MV_U16)MV_16BIT_LE_FAST(data);
+}
+
+/* 32bit write in little endian mode */
+#define MV_MEMIO_LE32_WRITE(addr, data) \
+ MV_MEMIO32_WRITE(addr, MV_32BIT_LE_FAST(data))
+
+/* 32bit read in little endian mode */
+static __inline MV_U32 MV_MEMIO_LE32_READ(MV_U32 addr)
+{
+ MV_U32 data;
+
+ data= (MV_U32)MV_MEMIO32_READ(addr);
+
+ return (MV_U32)MV_32BIT_LE_FAST(data);
+}
+
+static __inline void mvOsBCopy(char* srcAddr, char* dstAddr, int byteCount)
+{
+ while(byteCount != 0)
+ {
+ *dstAddr = *srcAddr;
+ dstAddr++;
+ srcAddr++;
+ byteCount--;
+ }
+}
+
+static INLINE MV_U64 mvOsDivMod64(MV_U64 divided, MV_U64 divisor, MV_U64* modulu)
+{
+ MV_U64 division = 0;
+
+ if(divisor == 1)
+ return divided;
+
+ while(divided >= divisor)
+ {
+ division++;
+ divided -= divisor;
+ }
+ if (modulu != NULL)
+ *modulu = divided;
+
+ return division;
+}
+
+#if defined(MV_BRIDGE_SYNC_REORDER)
+extern MV_U32 *mvUncachedParam;
+
+static __inline void mvOsBridgeReorderWA(void)
+{
+ volatile MV_U32 val = 0;
+
+ val = mvUncachedParam[0];
+}
+#endif
+
+
+/* Flash APIs */
+#define MV_FL_8_READ MV_MEMIO8_READ
+#define MV_FL_16_READ MV_MEMIO_LE16_READ
+#define MV_FL_32_READ MV_MEMIO_LE32_READ
+#define MV_FL_8_DATA_READ MV_MEMIO8_READ
+#define MV_FL_16_DATA_READ MV_MEMIO16_READ
+#define MV_FL_32_DATA_READ MV_MEMIO32_READ
+#define MV_FL_8_WRITE MV_MEMIO8_WRITE
+#define MV_FL_16_WRITE MV_MEMIO_LE16_WRITE
+#define MV_FL_32_WRITE MV_MEMIO_LE32_WRITE
+#define MV_FL_8_DATA_WRITE MV_MEMIO8_WRITE
+#define MV_FL_16_DATA_WRITE MV_MEMIO16_WRITE
+#define MV_FL_32_DATA_WRITE MV_MEMIO32_WRITE
+
+
+/* CPU cache information */
+#define CPU_I_CACHE_LINE_SIZE 32 /* 2do: replace 32 with linux core macro */
+#define CPU_D_CACHE_LINE_SIZE 32 /* 2do: replace 32 with linux core macro */
+
+#ifdef CONFIG_L2_CACHE_ENABLE
+/* Data cache flush one line */
+#define mvOsCacheLineFlushInv(handle, addr) \
+{ \
+ __asm__ __volatile__ ("mcr p15, 0, %0, c7, c14, 1" : : "r" (addr));\
+ __asm__ __volatile__ ("mcr p15, 1, %0, c15, c10, 1" : : "r" (addr));\
+ __asm__ __volatile__ ("mcr p15, 0, r0, c7, c10, 4"); \
+}
+
+#else
+
+/* Data cache flush one line */
+#define mvOsCacheLineFlushInv(handle, addr) \
+{ \
+ __asm__ __volatile__ ("mcr p15, 0, %0, c7, c14, 1" : : "r" (addr));\
+ __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" : : "r" (addr)); \
+}
+#endif
+
+#ifdef CONFIG_L2_CACHE_ENABLE
+#define mvOsCacheLineInv(handle,addr) \
+{ \
+ __asm__ __volatile__ ("mcr p15, 0, %0, c7, c6, 1" : : "r" (addr)); \
+ __asm__ __volatile__ ("mcr p15, 1, %0, c15, c11, 1" : : "r" (addr)); \
+}
+#else
+#define mvOsCacheLineInv(handle,addr) \
+{ \
+ __asm__ __volatile__ ("mcr p15, 0, %0, c7, c6, 1" : : "r" (addr)); \
+}
+#endif
+
+#ifdef CONFIG_L2_CACHE_ENABLE
+/* Data cache flush one line */
+#define mvOsCacheLineFlush(handle, addr) \
+{ \
+ __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 1" : : "r" (addr));\
+ __asm__ __volatile__ ("mcr p15, 1, %0, c15, c9, 1" : : "r" (addr));\
+ __asm__ __volatile__ ("mcr p15, 0, r0, c7, c10, 4"); \
+}
+
+#else
+/* Data cache flush one line */
+#define mvOsCacheLineFlush(handle, addr) \
+{ \
+ __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 1" : : "r" (addr));\
+ __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" : : "r" (addr)); \
+}
+#endif
+
+static __inline void mvOsPrefetch(const void *ptr)
+{
+#ifdef CONFIG_USE_DSP
+ __asm__ __volatile__(
+ "pld\t%0"
+ :
+ : "o" (*(char *)ptr)
+ : "cc");
+#else
+ return;
+#endif
+}
+
+
+/* Flush CPU pipe */
+#define CPU_PIPE_FLUSH
+
+
+
+
+
+/* register manipulations */
+
+/******************************************************************************
+* This debug function enable the write of each register that u-boot access to
+* to an array in the DRAM, the function record only MV_REG_WRITE access.
+* The function could not be operate when booting from flash.
+* In order to print the array we use the printreg command.
+******************************************************************************/
+/* #define REG_DEBUG */
+#if defined(REG_DEBUG)
+extern int reg_arry[2048][2];
+extern int reg_arry_index;
+#endif
+
+/* Marvell controller register read/write macros */
+#define MV_REG_VALUE(offset) \
+ (MV_MEMIO32_READ((INTER_REGS_BASE | (offset))))
+
+#define MV_REG_READ(offset) \
+ (MV_MEMIO_LE32_READ(INTER_REGS_BASE | (offset)))
+
+#if defined(REG_DEBUG)
+#define MV_REG_WRITE(offset, val) \
+ MV_MEMIO_LE32_WRITE((INTER_REGS_BASE | (offset)), (val)); \
+ { \
+ reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\
+ reg_arry[reg_arry_index][1] = (val);\
+ reg_arry_index++;\
+ }
+#else
+#define MV_REG_WRITE(offset, val) \
+ MV_MEMIO_LE32_WRITE((INTER_REGS_BASE | (offset)), (val));
+#endif
+
+#define MV_REG_BYTE_READ(offset) \
+ (MV_MEMIO8_READ((INTER_REGS_BASE | (offset))))
+
+#if defined(REG_DEBUG)
+#define MV_REG_BYTE_WRITE(offset, val) \
+ MV_MEMIO8_WRITE((INTER_REGS_BASE | (offset)), (val)); \
+ { \
+ reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\
+ reg_arry[reg_arry_index][1] = (val);\
+ reg_arry_index++;\
+ }
+#else
+#define MV_REG_BYTE_WRITE(offset, val) \
+ MV_MEMIO8_WRITE((INTER_REGS_BASE | (offset)), (val))
+#endif
+
+#if defined(REG_DEBUG)
+#define MV_REG_BIT_SET(offset, bitMask) \
+ (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \
+ (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) | \
+ MV_32BIT_LE_FAST(bitMask)))); \
+ { \
+ reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\
+ reg_arry[reg_arry_index][1] = (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)));\
+ reg_arry_index++;\
+ }
+#else
+#define MV_REG_BIT_SET(offset, bitMask) \
+ (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \
+ (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) | \
+ MV_32BIT_LE_FAST(bitMask))))
+#endif
+
+#if defined(REG_DEBUG)
+#define MV_REG_BIT_RESET(offset,bitMask) \
+ (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \
+ (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) & \
+ MV_32BIT_LE_FAST(~bitMask)))); \
+ { \
+ reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\
+ reg_arry[reg_arry_index][1] = (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)));\
+ reg_arry_index++;\
+ }
+#else
+#define MV_REG_BIT_RESET(offset,bitMask) \
+ (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \
+ (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) & \
+ MV_32BIT_LE_FAST(~bitMask))))
+#endif
+
+
+
+/* ARM architecture APIs */
+MV_U32 mvOsCpuRevGet (MV_VOID);
+MV_U32 mvOsCpuPartGet (MV_VOID);
+MV_U32 mvOsCpuArchGet (MV_VOID);
+MV_U32 mvOsCpuVarGet (MV_VOID);
+MV_U32 mvOsCpuAsciiGet (MV_VOID);
+
+/* Other APIs */
+void* mvOsIoCachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, MV_U32 *memHandle);
+void* mvOsIoUncachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, MV_U32 *memHandle );
+void mvOsIoUncachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, MV_U32 memHandle );
+void mvOsIoCachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, MV_U32 memHandle );
+int mvOsRand(void);
+
+#endif /* _MV_OS_LNX_H_ */
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+*******************************************************************************/
+/*******************************************************************************
+* mvOsLinux.h - O.S. interface header file for Linux
+*
+* DESCRIPTION:
+* This header file contains OS dependent definition under Linux
+*
+* DEPENDENCIES:
+* Linux kernel header files.
+*
+* FILE REVISION NUMBER:
+* $Revision: 1.1 $
+*******************************************************************************/
+
+#ifndef __INCmvOsLinuxh
+#define __INCmvOsLinuxh
+
+/* Includes */
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/errno.h>
+#include <linux/genhd.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/pci.h>
+
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include "mvOs.h"
+
+
+/* Definitions */
+#define MV_DEFAULT_QUEUE_DEPTH 2
+#define MV_SATA_SUPPORT_EDMA_SINGLE_DATA_REGION
+#define MV_SATA_SUPPORT_GEN2E_128_QUEUE_LEN
+
+#ifdef CONFIG_MV88F6082
+ #define MV_SATA_OVERRIDE_SW_QUEUE_SIZE
+ #define MV_SATA_REQUESTED_SW_QUEUE_SIZE 2
+ #undef MV_SATA_SUPPORT_GEN2E_128_QUEUE_LEN
+#endif
+
+/* System dependent macro for flushing CPU write cache */
+#if defined (MV_BRIDGE_SYNC_REORDER)
+#define MV_CPU_WRITE_BUFFER_FLUSH() do { \
+ wmb(); \
+ mvOsBridgeReorderWA(); \
+ } while (0)
+#else
+#define MV_CPU_WRITE_BUFFER_FLUSH() wmb()
+#endif /* CONFIG_MV78XX0 */
+
+/* System dependent little endian from / to CPU conversions */
+#define MV_CPU_TO_LE16(x) cpu_to_le16(x)
+#define MV_CPU_TO_LE32(x) cpu_to_le32(x)
+
+#define MV_LE16_TO_CPU(x) le16_to_cpu(x)
+#define MV_LE32_TO_CPU(x) le32_to_cpu(x)
+
+#ifdef __BIG_ENDIAN_BITFIELD
+#define MV_BIG_ENDIAN_BITFIELD
+#endif
+
+/* System dependent register read / write in byte/word/dword variants */
+#define MV_REG_WRITE_BYTE(base, offset, val) writeb(val, base + offset)
+#define MV_REG_WRITE_WORD(base, offset, val) writew(val, base + offset)
+#define MV_REG_WRITE_DWORD(base, offset, val) writel(val, base + offset)
+#define MV_REG_READ_BYTE(base, offset) readb(base + offset)
+#define MV_REG_READ_WORD(base, offset) readw(base + offset)
+#define MV_REG_READ_DWORD(base, offset) readl(base + offset)
+
+
+/* Typedefs */
+
+/* System dependant typedefs */
+typedef void *MV_VOID_PTR;
+typedef u32 *MV_U32_PTR;
+typedef u16 *MV_U16_PTR;
+typedef u8 *MV_U8_PTR;
+typedef char *MV_CHAR_PTR;
+typedef void *MV_BUS_ADDR_T;
+typedef unsigned long MV_CPU_FLAGS;
+
+
+/* Structures */
+/* System dependent structure */
+typedef struct mvOsSemaphore
+{
+ int notUsed;
+} MV_OS_SEMAPHORE;
+
+
+/* Functions (User implemented)*/
+
+/* Semaphore init, take and release */
+#define mvOsSemInit(x) MV_TRUE
+#define mvOsSemTake(x)
+#define mvOsSemRelease(x)
+
+/* Interrupt masking and unmasking functions */
+MV_CPU_FLAGS mvOsSaveFlagsAndMaskCPUInterrupts(MV_VOID);
+MV_VOID mvOsRestoreFlags(MV_CPU_FLAGS);
+
+/* Delay function in micro seconds resolution */
+void mvMicroSecondsDelay(MV_VOID_PTR, MV_U32);
+
+/* Typedefs */
+typedef enum mvBoolean
+{
+ MV_SFALSE, MV_STRUE
+} MV_BOOLEAN;
+
+/* System logging function */
+#include "mvLog.h"
+/* Enable READ/WRITE Long SCSI command only when driver is compiled for debugging */
+#ifdef MV_LOGGER
+#define MV_SATA_SUPPORT_READ_WRITE_LONG
+#endif
+
+#define MV_IAL_LOG_ID 3
+
+#endif /* __INCmvOsLinuxh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+
+*******************************************************************************/
+/*******************************************************************************
+* mvSysHwCfg.h - Marvell system HW configuration file
+*
+* DESCRIPTION:
+* None.
+*
+* DEPENDENCIES:
+* None.
+*
+*******************************************************************************/
+
+#ifndef __INCmvSysHwConfigh
+#define __INCmvSysHwConfigh
+
+#include "../../../../include/linux/autoconf.h"
+
+#define CONFIG_MARVELL 1
+
+/* includes */
+#define _1K 0x00000400
+#define _4K 0x00001000
+#define _8K 0x00002000
+#define _16K 0x00004000
+#define _32K 0x00008000
+#define _64K 0x00010000
+#define _128K 0x00020000
+#define _256K 0x00040000
+#define _512K 0x00080000
+
+#define _1M 0x00100000
+#define _2M 0x00200000
+#define _4M 0x00400000
+#define _8M 0x00800000
+#define _16M 0x01000000
+#define _32M 0x02000000
+#define _64M 0x04000000
+#define _128M 0x08000000
+#define _256M 0x10000000
+#define _512M 0x20000000
+
+#define _1G 0x40000000
+#define _2G 0x80000000
+
+/****************************************/
+/* Soc supporeted Units definitions */
+/****************************************/
+
+#ifdef CONFIG_MV_INCLUDE_PEX
+#define MV_INCLUDE_PEX
+#endif
+#ifdef CONFIG_MV_INCLUDE_TWSI
+#define MV_INCLUDE_TWSI
+#endif
+#ifdef CONFIG_MV_INCLUDE_CESA
+#define MV_INCLUDE_CESA
+#endif
+#ifdef CONFIG_MV_INCLUDE_GIG_ETH
+#define MV_INCLUDE_GIG_ETH
+#endif
+#ifdef CONFIG_MV_INCLUDE_INTEG_SATA
+#define MV_INCLUDE_INTEG_SATA
+#define MV_INCLUDE_SATA
+#endif
+#ifdef CONFIG_MV_INCLUDE_USB
+#define MV_INCLUDE_USB
+#define MV_USB_VOLTAGE_FIX
+#endif
+#ifdef CONFIG_MV_INCLUDE_NAND
+#define MV_INCLUDE_NAND
+#endif
+#ifdef CONFIG_MV_INCLUDE_TDM
+#define MV_INCLUDE_TDM
+#endif
+#ifdef CONFIG_MV_INCLUDE_XOR
+#define MV_INCLUDE_XOR
+#endif
+#ifdef CONFIG_MV_INCLUDE_TWSI
+#define MV_INCLUDE_TWSI
+#endif
+#ifdef CONFIG_MV_INCLUDE_UART
+#define MV_INCLUDE_UART
+#endif
+#ifdef CONFIG_MV_INCLUDE_SPI
+#define MV_INCLUDE_SPI
+#endif
+#ifdef CONFIG_MV_INCLUDE_SFLASH_MTD
+#define MV_INCLUDE_SFLASH_MTD
+#endif
+#ifdef CONFIG_MV_INCLUDE_AUDIO
+#define MV_INCLUDE_AUDIO
+#endif
+#ifdef CONFIG_MV_INCLUDE_TS
+#define MV_INCLUDE_TS
+#endif
+#ifdef CONFIG_MV_INCLUDE_SDIO
+#define MV_INCLUDE_SDIO
+#endif
+
+
+/* NAND flash stuff */
+#ifdef CONFIG_MV_NAND_BOOT
+#define MV_NAND_BOOT
+#endif
+#ifdef CONFIG_MV_NAND
+#define MV_NAND
+#endif
+
+/* SPI flash stuff */
+#ifdef CONFIG_MV_SPI_BOOT
+#define MV_SPI_BOOT
+#endif
+
+
+/****************************************************************/
+/************* General configuration ********************/
+/****************************************************************/
+
+/* Enable Clock Power Control */
+#define MV_INCLUDE_CLK_PWR_CNTRL
+
+/* Disable the DEVICE BAR in the PEX */
+#define MV_DISABLE_PEX_DEVICE_BAR
+
+/* Allow the usage of early printings during initialization */
+#define MV_INCLUDE_EARLY_PRINTK
+
+/****************************************************************/
+/************* NFP configuration ********************************/
+/****************************************************************/
+#define MV_NFP_SEC_Q_SIZE 64
+#define MV_NFP_SEC_REQ_Q_SIZE 1000
+
+
+
+/****************************************************************/
+/************* CESA configuration ********************/
+/****************************************************************/
+
+#ifdef MV_INCLUDE_CESA
+
+#define MV_CESA_MAX_CHAN 4
+
+/* Use 2K of SRAM */
+#define MV_CESA_MAX_BUF_SIZE 1600
+
+#endif /* MV_INCLUDE_CESA */
+
+#if defined(CONFIG_MV_INCLUDE_GIG_ETH)
+
+#ifdef CONFIG_MV_NFP_STATS
+#define MV_FP_STATISTICS
+#else
+#undef MV_FP_STATISTICS
+#endif
+/* Default configuration for SKB_REUSE: 0 - Disabled, 1 - Enabled */
+#define MV_ETH_SKB_REUSE_DEFAULT 1
+/* Default configuration for TX_EN workaround: 0 - Disabled, 1 - Enabled */
+#define MV_ETH_TX_EN_DEFAULT 0
+
+/* un-comment if you want to perform tx_done from within the poll function */
+/* #define ETH_TX_DONE_ISR */
+
+/* put descriptors in uncached memory */
+/* #define ETH_DESCR_UNCACHED */
+
+/* Descriptors location: DRAM/internal-SRAM */
+#define ETH_DESCR_IN_SDRAM
+#undef ETH_DESCR_IN_SRAM /* No integrated SRAM in 88Fxx81 devices */
+
+#if defined(ETH_DESCR_IN_SRAM)
+#if defined(ETH_DESCR_UNCACHED)
+ #define ETH_DESCR_CONFIG_STR "Uncached descriptors in integrated SRAM"
+#else
+ #define ETH_DESCR_CONFIG_STR "Cached descriptors in integrated SRAM"
+#endif
+#elif defined(ETH_DESCR_IN_SDRAM)
+#if defined(ETH_DESCR_UNCACHED)
+ #define ETH_DESCR_CONFIG_STR "Uncached descriptors in DRAM"
+#else
+ #define ETH_DESCR_CONFIG_STR "Cached descriptors in DRAM"
+#endif
+#else
+ #error "Ethernet descriptors location undefined"
+#endif /* ETH_DESCR_IN_SRAM or ETH_DESCR_IN_SDRAM*/
+
+/* SW Sync-Barrier: not relevant for 88fxx81*/
+/* Reasnable to define this macro when descriptors in SRAM and buffers in DRAM */
+/* In RX the CPU theoretically might see himself as the descriptor owner, */
+/* although the buffer hadn't been written to DRAM yet. Performance cost. */
+/* #define INCLUDE_SYNC_BARR */
+
+/* Buffers cache coherency method (buffers in DRAM) */
+#ifndef MV_CACHE_COHER_SW
+/* Taken from mvCommon.h */
+/* Memory uncached, HW or SW cache coherency is not needed */
+#define MV_UNCACHED 0
+/* Memory cached, HW cache coherency supported in WriteThrough mode */
+#define MV_CACHE_COHER_HW_WT 1
+/* Memory cached, HW cache coherency supported in WriteBack mode */
+#define MV_CACHE_COHER_HW_WB 2
+/* Memory cached, No HW cache coherency, Cache coherency must be in SW */
+#define MV_CACHE_COHER_SW 3
+
+#endif
+
+/* DRAM cache coherency configuration */
+#define MV_CACHE_COHERENCY MV_CACHE_COHER_SW
+
+
+#define ETHER_DRAM_COHER MV_CACHE_COHER_SW /* No HW coherency in 88Fxx81 devices */
+
+#if (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB)
+ #define ETH_SDRAM_CONFIG_STR "DRAM HW cache coherency (write-back)"
+#elif (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT)
+ #define ETH_SDRAM_CONFIG_STR "DRAM HW cache coherency (write-through)"
+#elif (ETHER_DRAM_COHER == MV_CACHE_COHER_SW)
+ #define ETH_SDRAM_CONFIG_STR "DRAM SW cache-coherency"
+#elif (ETHER_DRAM_COHER == MV_UNCACHED)
+# define ETH_SDRAM_CONFIG_STR "DRAM uncached"
+#else
+ #error "Ethernet-DRAM undefined"
+#endif /* ETHER_DRAM_COHER */
+
+
+/****************************************************************/
+/************* Ethernet driver configuration ********************/
+/****************************************************************/
+
+/* port's default queueus */
+#define ETH_DEF_TXQ 0
+#define ETH_DEF_RXQ 0
+
+#define MV_ETH_RX_Q_NUM CONFIG_MV_ETH_RX_Q_NUM
+#define MV_ETH_TX_Q_NUM CONFIG_MV_ETH_TX_Q_NUM
+
+/* interrupt coalescing setting */
+#define ETH_TX_COAL 200
+#define ETH_RX_COAL 200
+
+/* Checksum offloading */
+#define TX_CSUM_OFFLOAD
+#define RX_CSUM_OFFLOAD
+
+#endif /* CONFIG_MV_INCLUDE_GIG_ETH */
+
+/****************************************************************/
+/*************** Telephony configuration ************************/
+/****************************************************************/
+#if defined(CONFIG_MV_TDM_LINEAR_MODE)
+ #define MV_TDM_LINEAR_MODE
+#elif defined(CONFIG_MV_TDM_ULAW_MODE)
+ #define MV_TDM_ULAW_MODE
+#endif
+
+#if defined(CONFIG_MV_TDM_5CHANNELS)
+ #define MV_TDM_5CHANNELS
+#endif
+
+#if defined(CONFIG_MV_TDM_USE_EXTERNAL_PCLK_SOURCE)
+ #define MV_TDM_USE_EXTERNAL_PCLK_SOURCE
+#endif
+
+/* We use the following registers to store DRAM interface pre configuration */
+/* auto-detection results */
+/* IMPORTANT: We are using mask register for that purpose. Before writing */
+/* to units mask register, make sure main maks register is set to disable */
+/* all interrupts. */
+#define DRAM_BUF_REG0 0x30810 /* sdram bank 0 size */
+#define DRAM_BUF_REG1 0x30820 /* sdram config */
+#define DRAM_BUF_REG2 0x30830 /* sdram mode */
+#define DRAM_BUF_REG3 0x308c4 /* dunit control low */
+#define DRAM_BUF_REG4 0x60a90 /* sdram address control */
+#define DRAM_BUF_REG5 0x60a94 /* sdram timing control low */
+#define DRAM_BUF_REG6 0x60a98 /* sdram timing control high */
+#define DRAM_BUF_REG7 0x60a9c /* sdram ODT control low */
+#define DRAM_BUF_REG8 0x60b90 /* sdram ODT control high */
+#define DRAM_BUF_REG9 0x60b94 /* sdram Dunit ODT control */
+#define DRAM_BUF_REG10 0x60b98 /* sdram Extended Mode */
+#define DRAM_BUF_REG11 0x60b9c /* sdram Ddr2 Time Low Reg */
+#define DRAM_BUF_REG12 0x60a00 /* sdram Ddr2 Time High Reg */
+#define DRAM_BUF_REG13 0x60a04 /* dunit Ctrl High */
+#define DRAM_BUF_REG14 0x60b00 /* sdram second DIMM exist */
+
+/* Following the pre-configuration registers default values restored after */
+/* auto-detection is done */
+#define DRAM_BUF_REG_DV 0
+
+/* System Mapping */
+#define SDRAM_CS0_BASE 0x00000000
+#define SDRAM_CS0_SIZE _256M
+
+#define SDRAM_CS1_BASE 0x10000000
+#define SDRAM_CS1_SIZE _256M
+
+#define SDRAM_CS2_BASE 0x20000000
+#define SDRAM_CS2_SIZE _256M
+
+#define SDRAM_CS3_BASE 0x30000000
+#define SDRAM_CS3_SIZE _256M
+
+/* PEX */
+#define PEX0_MEM_BASE 0xe8000000
+#define PEX0_MEM_SIZE _128M
+
+#define PEX0_IO_BASE 0xf2000000
+#define PEX0_IO_SIZE _1M
+
+/* Device Chip Selects */
+#define NFLASH_CS_BASE 0xfa000000
+#define NFLASH_CS_SIZE _2M
+
+#define SPI_CS_BASE 0xf4000000
+#define SPI_CS_SIZE _16M
+
+#define CRYPT_ENG_BASE 0xf0000000
+#define CRYPT_ENG_SIZE _2M
+
+#define BOOTDEV_CS_BASE 0xff800000
+#define BOOTDEV_CS_SIZE _8M
+
+/* CS2 - BOOTROM */
+#define DEVICE_CS2_BASE 0xff900000
+#define DEVICE_CS2_SIZE _1M
+
+/* PEX Work arround */
+/* the target we will use for the workarround */
+#define PEX_CONFIG_RW_WA_TARGET PEX0_MEM
+/*a flag that indicates if we are going to use the
+size and base of the target we using for the workarround
+window */
+#define PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES 1
+/* if the above flag is 0 then the following values
+will be used for the workarround window base and size,
+otherwise the following defines will be ignored */
+#define PEX_CONFIG_RW_WA_BASE 0xF3000000
+#define PEX_CONFIG_RW_WA_SIZE _16M
+
+/* Internal registers: size is defined in Controllerenvironment */
+#define INTER_REGS_BASE 0xFEE00000
+
+/* DRAM detection stuff */
+#define MV_DRAM_AUTO_SIZE
+
+/* Board clock detection */
+#define TCLK_AUTO_DETECT /* Use Tclk auto detection */
+#define SYSCLK_AUTO_DETECT /* Use SysClk auto detection */
+#define PCLCK_AUTO_DETECT /* Use PClk auto detection */
+#define L2CLK_AUTO_DETECT /* Use L2Clk auto detection */
+
+/* PEX-PCI\PCI-PCI Bridge*/
+#define PCI0_IF_PTP 0 /* Bridge exist on pciIf0*/
+
+
+
+#endif /* __INCmvSysHwConfigh */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvCntmr.h"
+#include "cpu/mvCpu.h"
+
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+extern unsigned int whoAmI(void);
+
+/*******************************************************************************
+* mvCntmrLoad -
+*
+* DESCRIPTION:
+* Load an init Value to a given counter/timer
+*
+* INPUT:
+* countNum - counter number
+* value - value to be loaded
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess
+*******************************************************************************/
+MV_STATUS mvCntmrLoad(MV_U32 countNum, MV_U32 value)
+{
+ if (countNum >= MV_CNTMR_MAX_COUNTER )
+ {
+
+ mvOsPrintf(("mvCntmrLoad: Err. Illigal counter number \n"));
+ return MV_BAD_PARAM;;
+
+ }
+
+ MV_REG_WRITE(CNTMR_RELOAD_REG(countNum),value);
+ MV_REG_WRITE(CNTMR_VAL_REG(countNum),value);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCntmrRead -
+*
+* DESCRIPTION:
+* Returns the value of the given Counter/Timer
+*
+* INPUT:
+* countNum - counter number
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_U32 counter value
+*******************************************************************************/
+MV_U32 mvCntmrRead(MV_U32 countNum)
+{
+ return MV_REG_READ(CNTMR_VAL_REG(countNum));
+}
+
+/*******************************************************************************
+* mvCntmrWrite -
+*
+* DESCRIPTION:
+* Returns the value of the given Counter/Timer
+*
+* INPUT:
+* countNum - counter number
+* countVal - value to write
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None
+*******************************************************************************/
+void mvCntmrWrite(MV_U32 countNum,MV_U32 countVal)
+{
+ MV_REG_WRITE(CNTMR_VAL_REG(countNum),countVal);
+}
+
+/*******************************************************************************
+* mvCntmrCtrlSet -
+*
+* DESCRIPTION:
+* Set the Control to a given counter/timer
+*
+* INPUT:
+* countNum - counter number
+* pCtrl - pointer to MV_CNTMR_CTRL structure
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess
+*******************************************************************************/
+MV_STATUS mvCntmrCtrlSet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl)
+{
+ MV_U32 cntmrCtrl;
+
+ if (countNum >= MV_CNTMR_MAX_COUNTER )
+ {
+
+ DB(mvOsPrintf(("mvCntmrCtrlSet: Err. Illigal counter number \n")));
+ return MV_BAD_PARAM;;
+
+ }
+
+ /* read control register */
+ cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG);
+
+
+ if (pCtrl->enable) /* enable counter\timer */
+ {
+ cntmrCtrl |= CTCR_ARM_TIMER_EN(countNum);
+ }
+ else /* disable counter\timer */
+ {
+ cntmrCtrl &= ~CTCR_ARM_TIMER_EN(countNum);
+ }
+
+ if ( pCtrl->autoEnable ) /* Auto mode */
+ {
+ cntmrCtrl |= CTCR_ARM_TIMER_AUTO_EN(countNum);
+
+ }
+ else /* no auto mode */
+ {
+ cntmrCtrl &= ~CTCR_ARM_TIMER_AUTO_EN(countNum);
+ }
+
+ MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl);
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvCntmrCtrlGet -
+*
+* DESCRIPTION:
+* Get the Control value of a given counter/timer
+*
+* INPUT:
+* countNum - counter number
+* pCtrl - pointer to MV_CNTMR_CTRL structure
+*
+* OUTPUT:
+* Counter\Timer control value
+*
+* RETURN:
+* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess
+*******************************************************************************/
+MV_STATUS mvCntmrCtrlGet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl)
+{
+ MV_U32 cntmrCtrl;
+
+ if (countNum >= MV_CNTMR_MAX_COUNTER )
+ {
+ DB(mvOsPrintf(("mvCntmrCtrlGet: Err. Illigal counter number \n")));
+ return MV_BAD_PARAM;;
+ }
+
+ /* read control register */
+ cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG);
+
+ /* enable counter\timer */
+ if (cntmrCtrl & CTCR_ARM_TIMER_EN(countNum))
+ {
+ pCtrl->enable = MV_TRUE;
+ }
+ else
+ {
+ pCtrl->enable = MV_FALSE;
+ }
+
+ /* counter mode */
+ if (cntmrCtrl & CTCR_ARM_TIMER_AUTO_EN(countNum))
+ {
+ pCtrl->autoEnable = MV_TRUE;
+ }
+ else
+ {
+ pCtrl->autoEnable = MV_FALSE;
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCntmrEnable -
+*
+* DESCRIPTION:
+* Set the Enable-Bit to logic '1' ==> starting the counter
+*
+* INPUT:
+* countNum - counter number
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess
+*******************************************************************************/
+MV_STATUS mvCntmrEnable(MV_U32 countNum)
+{
+ MV_U32 cntmrCtrl;
+
+ if (countNum >= MV_CNTMR_MAX_COUNTER )
+ {
+
+ DB(mvOsPrintf(("mvCntmrEnable: Err. Illigal counter number \n")));
+ return MV_BAD_PARAM;;
+
+ }
+
+ /* read control register */
+ cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG);
+
+ /* enable counter\timer */
+ cntmrCtrl |= CTCR_ARM_TIMER_EN(countNum);
+
+
+ MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCntmrDisable -
+*
+* DESCRIPTION:
+* Stop the counter/timer running, and returns its Value
+*
+* INPUT:
+* countNum - counter number
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_U32 counter\timer value
+*******************************************************************************/
+MV_STATUS mvCntmrDisable(MV_U32 countNum)
+{
+ MV_U32 cntmrCtrl;
+
+ if (countNum >= MV_CNTMR_MAX_COUNTER )
+ {
+
+ DB(mvOsPrintf(("mvCntmrDisable: Err. Illigal counter number \n")));
+ return MV_BAD_PARAM;;
+
+ }
+
+ /* read control register */
+ cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG);
+
+ /* disable counter\timer */
+ cntmrCtrl &= ~CTCR_ARM_TIMER_EN(countNum);
+
+ MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvCntmrStart -
+*
+* DESCRIPTION:
+* Combined all the sub-operations above to one function: Load,setMode,Enable
+*
+* INPUT:
+* countNum - counter number
+* value - value of the counter\timer to be set
+* pCtrl - pointer to MV_CNTMR_CTRL structure
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess
+*******************************************************************************/
+MV_STATUS mvCntmrStart(MV_U32 countNum, MV_U32 value,
+ MV_CNTMR_CTRL *pCtrl)
+{
+
+ if (countNum >= MV_CNTMR_MAX_COUNTER )
+ {
+
+ mvOsPrintf(("mvCntmrDisable: Err. Illigal counter number \n"));
+ return MV_BAD_PARAM;;
+
+ }
+
+ /* load value onto counter\timer */
+ mvCntmrLoad(countNum,value);
+
+ /* set the counter to load in the first time */
+ mvCntmrWrite(countNum,value);
+
+ /* set control for timer \ cunter and enable */
+ mvCntmrCtrlSet(countNum,pCtrl);
+
+ return MV_OK;
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvTmrWtdgh
+#define __INCmvTmrWtdgh
+
+/* includes */
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "cntmr/mvCntmrRegs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+
+/* This enumerator describe counters\watchdog numbers */
+typedef enum _mvCntmrID
+{
+ TIMER0 = 0,
+ TIMER1,
+ WATCHDOG,
+ TIMER2,
+ TIMER3,
+}MV_CNTMR_ID;
+
+
+/* Counter / Timer control structure */
+typedef struct _mvCntmrCtrl
+{
+ MV_BOOL enable; /* enable */
+ MV_BOOL autoEnable; /* counter/Timer */
+}MV_CNTMR_CTRL;
+
+
+/* Functions */
+
+/* Load an init Value to a given counter/timer */
+MV_STATUS mvCntmrLoad(MV_U32 countNum, MV_U32 value);
+
+/* Returns the value of the given Counter/Timer */
+MV_U32 mvCntmrRead(MV_U32 countNum);
+
+/* Write a value of the given Counter/Timer */
+void mvCntmrWrite(MV_U32 countNum,MV_U32 countVal);
+
+/* Set the Control to a given counter/timer */
+MV_STATUS mvCntmrCtrlSet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl);
+
+/* Get the value of a given counter/timer */
+MV_STATUS mvCntmrCtrlGet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl);
+
+/* Set the Enable-Bit to logic '1' ==> starting the counter. */
+MV_STATUS mvCntmrEnable(MV_U32 countNum);
+
+/* Stop the counter/timer running, and returns its Value. */
+MV_STATUS mvCntmrDisable(MV_U32 countNum);
+
+/* Combined all the sub-operations above to one function: Load,setMode,Enable */
+MV_STATUS mvCntmrStart(MV_U32 countNum, MV_U32 value,
+ MV_CNTMR_CTRL *pCtrl);
+
+#endif /* __INCmvTmrWtdgh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvTmrwtdgRegsh
+#define __INCmvTmrwtdgRegsh
+
+/*******************************************/
+/* ARM Timers Registers Map */
+/*******************************************/
+
+#define CNTMR_RELOAD_REG(tmrNum) (CNTMR_BASE + 0x10 + (tmrNum)*8 + \
+ (((tmrNum) <= 3)?0:8))
+#define CNTMR_VAL_REG(tmrNum) (CNTMR_BASE + 0x14 + (tmrNum)*8 + \
+ (((tmrNum) <= 3)?0:8))
+#define CNTMR_CTRL_REG (CNTMR_BASE)
+
+/*For MV78XX0*/
+#define CNTMR_CAUSE_REG (CPU_AHB_MBUS_CAUSE_INT_REG(whoAmI()))
+#define CNTMR_MASK_REG (CPU_AHB_MBUS_MASK_INT_REG(whoAmI()))
+
+/* ARM Timers Registers Map */
+/*******************************************/
+
+
+/* ARM Timers Control Register */
+/* CPU_TIMERS_CTRL_REG (CTCR) */
+
+#define TIMER0_NUM 0
+#define TIMER1_NUM 1
+#define WATCHDOG_NUM 2
+#define TIMER2_NUM 3
+#define TIMER3_NUM 4
+
+#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2)
+#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS)
+#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+
+#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1)
+#define CTCR_ARM_TIMER_AUTO_MASK(cntr) BIT1
+#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+
+
+/* ARM Timer\Watchdog Reload Register */
+/* CNTMR_RELOAD_REG (TRR) */
+
+#define TRG_ARM_TIMER_REL_OFFS 0
+#define TRG_ARM_TIMER_REL_MASK 0xffffffff
+
+/* ARM Timer\Watchdog Register */
+/* CNTMR_VAL_REG (TVRG) */
+
+#define TVR_ARM_TIMER_OFFS 0
+#define TVR_ARM_TIMER_MASK 0xffffffff
+#define TVR_ARM_TIMER_MAX 0xffffffff
+
+
+
+#endif /* __INCmvTmrwtdgRegsh */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include "mvOs.h"
+#include "mvCpuCntrs.h"
+
+
+const static MV_CPU_CNTRS_OPS mvCpuCntrsOpsTbl[MV_CPU_CNTRS_NUM][MV_CPU_CNTRS_OPS_NUM] =
+{
+ /*0*/
+ {
+ MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_DCACHE_READ_HIT, MV_CPU_CNTRS_DCACHE_READ_MISS,
+ MV_CPU_CNTRS_DCACHE_WRITE_HIT, MV_CPU_CNTRS_DCACHE_WRITE_MISS, MV_CPU_CNTRS_INSTRUCTIONS,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID,
+ MV_CPU_CNTRS_MMU_READ_LATENCY, MV_CPU_CNTRS_ICACHE_READ_LATENCY, MV_CPU_CNTRS_WB_WRITE_LATENCY,
+ MV_CPU_CNTRS_LDM_STM_HOLD, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID,
+ MV_CPU_CNTRS_DATA_WRITE_ACCESS, MV_CPU_CNTRS_DATA_READ_ACCESS, MV_CPU_CNTRS_INVALID,
+ MV_CPU_CNTRS_BRANCH_PREDICT_COUNT,
+ },
+ /*1*/
+ {
+ MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_ICACHE_READ_MISS, MV_CPU_CNTRS_DCACHE_READ_MISS,
+ MV_CPU_CNTRS_DCACHE_WRITE_MISS, MV_CPU_CNTRS_ITLB_MISS, MV_CPU_CNTRS_SINGLE_ISSUE,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BRANCH_RETIRED, MV_CPU_CNTRS_INVALID,
+ MV_CPU_CNTRS_MMU_READ_BEAT, MV_CPU_CNTRS_ICACHE_READ_LATENCY, MV_CPU_CNTRS_WB_WRITE_BEAT,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_IS_HOLD, MV_CPU_CNTRS_DATA_READ_ACCESS,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID,
+ MV_CPU_CNTRS_INVALID,
+ },
+ /*2*/
+ {
+ MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DCACHE_ACCESS,
+ MV_CPU_CNTRS_DTLB_MISS, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BRANCH_PREDICT_MISS, MV_CPU_CNTRS_WB_WRITE_BEAT,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DCACHE_READ_LATENCY, MV_CPU_CNTRS_DCACHE_WRITE_LATENCY,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BIU_SIMULT_ACCESS,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID,
+ MV_CPU_CNTRS_INVALID,
+ },
+ /*3*/
+ {
+ MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_DCACHE_READ_MISS, MV_CPU_CNTRS_DCACHE_WRITE_MISS,
+ MV_CPU_CNTRS_TLB_MISS, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BRANCH_TAKEN, MV_CPU_CNTRS_WB_FULL_CYCLES,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DCACHE_READ_BEAT, MV_CPU_CNTRS_DCACHE_WRITE_BEAT,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BIU_ANY_ACCESS,
+ MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DATA_WRITE_ACCESS,
+ MV_CPU_CNTRS_INVALID,
+ }
+};
+
+MV_CPU_CNTRS_ENTRY mvCpuCntrsTbl[MV_CPU_CNTRS_NUM];
+
+MV_CPU_CNTRS_EVENT* mvCpuCntrsEventTbl[128];
+
+void mvCpuCntrsReset(void)
+{
+ MV_U32 reg = 0;
+
+ MV_ASM ("mcr p15, 0, %0, c15, c13, 0" : : "r" (reg));
+ MV_ASM ("mcr p15, 0, %0, c15, c13, 1" : : "r" (reg));
+ MV_ASM ("mcr p15, 0, %0, c15, c13, 2" : : "r" (reg));
+ MV_ASM ("mcr p15, 0, %0, c15, c13, 3" : : "r" (reg));
+ MV_ASM ("mcr p15, 0, %0, c15, c13, 4" : : "r" (reg));
+ MV_ASM ("mcr p15, 0, %0, c15, c13, 5" : : "r" (reg));
+ MV_ASM ("mcr p15, 0, %0, c15, c13, 6" : : "r" (reg));
+ MV_ASM ("mcr p15, 0, %0, c15, c13, 7" : : "r" (reg));
+}
+
+void program_counter(int counter, int op)
+{
+ MV_U32 reg = (1 << op) | 0x1; /*enable*/
+
+ switch(counter)
+ {
+ case 0:
+ __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 0" : : "r" (reg));
+ return;
+
+ case 1:
+ __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 1" : : "r" (reg));
+ return;
+
+ case 2:
+ __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 2" : : "r" (reg));
+ return;
+
+ case 3:
+ __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 3" : : "r" (reg));
+ return;
+
+ default:
+ mvOsPrintf("error in program_counter: bad counter number (%d)\n", counter);
+ }
+ return;
+}
+
+void mvCpuCntrsEventClear(MV_CPU_CNTRS_EVENT* pEvent)
+{
+ int i;
+
+ for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+ {
+ pEvent->counters_sum[i] = 0;
+ }
+ pEvent->num_of_measurements = 0;
+}
+
+
+MV_CPU_CNTRS_EVENT* mvCpuCntrsEventCreate(char* name, MV_U32 print_threshold)
+{
+ int i;
+ MV_CPU_CNTRS_EVENT* event = mvOsMalloc(sizeof(MV_CPU_CNTRS_EVENT));
+
+ if(event)
+ {
+ strncpy(event->name, name, sizeof(event->name));
+ event->num_of_measurements = 0;
+ event->avg_sample_count = print_threshold;
+ for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+ {
+ event->counters_before[i] = 0;
+ event->counters_after[i] = 0;
+ event->counters_sum[i] = 0;
+ }
+ }
+ return event;
+}
+
+void mvCpuCntrsEventDelete(MV_CPU_CNTRS_EVENT* event)
+{
+ if(event != NULL)
+ mvOsFree(event);
+}
+
+
+MV_STATUS mvCpuCntrsProgram(int counter, MV_CPU_CNTRS_OPS op,
+ char* name, MV_U32 overhead)
+{
+ int i;
+
+ /* Find required operations */
+ for(i=0; i<MV_CPU_CNTRS_OPS_NUM; i++)
+ {
+ if( mvCpuCntrsOpsTbl[counter][i] == op)
+ {
+ strncpy(mvCpuCntrsTbl[counter].name, name, sizeof(mvCpuCntrsTbl[counter].name));
+ mvCpuCntrsTbl[counter].operation = op;
+ mvCpuCntrsTbl[counter].opIdx = i+1;
+ mvCpuCntrsTbl[counter].overhead = overhead;
+ program_counter(counter, mvCpuCntrsTbl[counter].opIdx);
+ mvOsPrintf("Counter=%d, opIdx=%d, overhead=%d\n",
+ counter, mvCpuCntrsTbl[counter].opIdx, mvCpuCntrsTbl[counter].overhead);
+ return MV_OK;
+ }
+ }
+ return MV_NOT_FOUND;
+}
+
+void mvCpuCntrsShow(MV_CPU_CNTRS_EVENT* pEvent)
+{
+ int i;
+ MV_U64 counters_avg;
+
+ if(pEvent->num_of_measurements < pEvent->avg_sample_count)
+ return;
+
+ mvOsPrintf("%16s: ", pEvent->name);
+ for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+ {
+ counters_avg = mvOsDivMod64(pEvent->counters_sum[i],
+ pEvent->num_of_measurements, NULL);
+ if(counters_avg >= mvCpuCntrsTbl[i].overhead)
+ counters_avg -= mvCpuCntrsTbl[i].overhead;
+ else
+ counters_avg = 0;
+
+ mvOsPrintf("%s=%5llu, ", mvCpuCntrsTbl[i].name, counters_avg);
+ }
+ mvOsPrintf("\n");
+ mvCpuCntrsEventClear(pEvent);
+ mvCpuCntrsReset();
+}
+
+void mvCpuCntrsStatus(void)
+{
+ int i;
+
+ for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+ {
+ mvOsPrintf("#%d: %s, overhead=%d\n",
+ i, mvCpuCntrsTbl[i].name, mvCpuCntrsTbl[i].overhead);
+ }
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+*******************************************************************************/
+#ifndef __mvCpuCntrs_h__
+#define __mvCpuCntrs_h__
+
+#include "mvTypes.h"
+#include "mvOs.h"
+
+
+#define MV_CPU_CNTRS_NUM 4
+#define MV_CPU_CNTRS_OPS_NUM 32
+
+typedef enum
+{
+ MV_CPU_CNTRS_INVALID = 0,
+ MV_CPU_CNTRS_CYCLES,
+ MV_CPU_CNTRS_ICACHE_READ_MISS,
+ MV_CPU_CNTRS_DCACHE_ACCESS,
+ MV_CPU_CNTRS_DCACHE_READ_MISS,
+ MV_CPU_CNTRS_DCACHE_READ_HIT,
+ MV_CPU_CNTRS_DCACHE_WRITE_MISS,
+ MV_CPU_CNTRS_DCACHE_WRITE_HIT,
+ MV_CPU_CNTRS_DTLB_MISS,
+ MV_CPU_CNTRS_TLB_MISS,
+ MV_CPU_CNTRS_ITLB_MISS,
+ MV_CPU_CNTRS_INSTRUCTIONS,
+ MV_CPU_CNTRS_SINGLE_ISSUE,
+ MV_CPU_CNTRS_MMU_READ_LATENCY,
+ MV_CPU_CNTRS_MMU_READ_BEAT,
+ MV_CPU_CNTRS_BRANCH_RETIRED,
+ MV_CPU_CNTRS_BRANCH_TAKEN,
+ MV_CPU_CNTRS_BRANCH_PREDICT_MISS,
+ MV_CPU_CNTRS_BRANCH_PREDICT_COUNT,
+ MV_CPU_CNTRS_WB_FULL_CYCLES,
+ MV_CPU_CNTRS_WB_WRITE_LATENCY,
+ MV_CPU_CNTRS_WB_WRITE_BEAT,
+ MV_CPU_CNTRS_ICACHE_READ_LATENCY,
+ MV_CPU_CNTRS_ICACHE_READ_BEAT,
+ MV_CPU_CNTRS_DCACHE_READ_LATENCY,
+ MV_CPU_CNTRS_DCACHE_READ_BEAT,
+ MV_CPU_CNTRS_DCACHE_WRITE_LATENCY,
+ MV_CPU_CNTRS_DCACHE_WRITE_BEAT,
+ MV_CPU_CNTRS_LDM_STM_HOLD,
+ MV_CPU_CNTRS_IS_HOLD,
+ MV_CPU_CNTRS_DATA_WRITE_ACCESS,
+ MV_CPU_CNTRS_DATA_READ_ACCESS,
+ MV_CPU_CNTRS_BIU_SIMULT_ACCESS,
+ MV_CPU_CNTRS_BIU_ANY_ACCESS,
+
+} MV_CPU_CNTRS_OPS;
+
+typedef struct
+{
+ char name[16];
+ MV_CPU_CNTRS_OPS operation;
+ int opIdx;
+ MV_U32 overhead;
+
+} MV_CPU_CNTRS_ENTRY;
+
+
+typedef struct
+{
+ char name[16];
+ MV_U32 num_of_measurements;
+ MV_U32 avg_sample_count;
+ MV_U64 counters_before[MV_CPU_CNTRS_NUM];
+ MV_U64 counters_after[MV_CPU_CNTRS_NUM];
+ MV_U64 counters_sum[MV_CPU_CNTRS_NUM];
+
+} MV_CPU_CNTRS_EVENT;
+
+extern MV_CPU_CNTRS_ENTRY mvCpuCntrsTbl[MV_CPU_CNTRS_NUM];
+
+
+MV_STATUS mvCpuCntrsProgram(int counter, MV_CPU_CNTRS_OPS op,
+ char* name, MV_U32 overhead);
+void mvCpuCntrsInit(void);
+MV_CPU_CNTRS_EVENT* mvCpuCntrsEventCreate(char* name, MV_U32 print_threshold);
+void mvCpuCntrsEventDelete(MV_CPU_CNTRS_EVENT* event);
+void mvCpuCntrsReset(void);
+void mvCpuCntrsShow(MV_CPU_CNTRS_EVENT* pEvent);
+void mvCpuCntrsEventClear(MV_CPU_CNTRS_EVENT* pEvent);
+
+/* internal */
+void program_counter(int counter, int op);
+
+static INLINE MV_U64 mvCpuCntrsRead(const int counter)
+{
+ MV_U32 low = 0, high = 0;
+ MV_U32 ll = 0;
+
+ switch(counter)
+ {
+ case 0:
+ MV_ASM ("mcr p15, 0, %0, c15, c12, 0" : : "r" (ll));
+ MV_ASM ("mrc p15, 0, %0, c15, c13, 0" : "=r" (low));
+ MV_ASM ("mrc p15, 0, %0, c15, c13, 1" : "=r" (high));
+ break;
+
+ case 1:
+ MV_ASM ("mcr p15, 0, %0, c15, c12, 1" : : "r" (ll));
+ MV_ASM ("mrc p15, 0, %0, c15, c13, 2" : "=r" (low));
+ MV_ASM ("mrc p15, 0, %0, c15, c13, 3" : "=r" (high));
+ break;
+
+ case 2:
+ MV_ASM ("mcr p15, 0, %0, c15, c12, 2" : : "r" (ll));
+ MV_ASM ("mrc p15, 0, %0, c15, c13, 4" : "=r" (low));
+ MV_ASM ("mrc p15, 0, %0, c15, c13, 5" : "=r" (high));
+ break;
+
+ case 3:
+ MV_ASM ("mcr p15, 0, %0, c15, c12, 3" : : "r" (ll));
+ MV_ASM ("mrc p15, 0, %0, c15, c13, 6" : "=r" (low));
+ MV_ASM ("mrc p15, 0, %0, c15, c13, 7" : "=r" (high));
+ break;
+
+ default:
+ mvOsPrintf("mv_cpu_cntrs_read: bad counter number (%d)\n", counter);
+ }
+ program_counter(counter, mvCpuCntrsTbl[counter].opIdx);
+ return (((MV_U64)high << 32 ) | low);
+
+}
+
+
+static INLINE void mvCpuCntrsReadBefore(MV_CPU_CNTRS_EVENT* pEvent)
+{
+#if 0
+ int i;
+
+ /* order is important - we want to measure the cycle count last here! */
+ for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+ pEvent->counters_before[i] = mvCpuCntrsRead(i);
+#else
+ pEvent->counters_before[1] = mvCpuCntrsRead(1);
+ pEvent->counters_before[3] = mvCpuCntrsRead(3);
+ pEvent->counters_before[0] = mvCpuCntrsRead(0);
+ pEvent->counters_before[2] = mvCpuCntrsRead(2);
+#endif
+}
+
+static INLINE void mvCpuCntrsReadAfter(MV_CPU_CNTRS_EVENT* pEvent)
+{
+ int i;
+
+#if 0
+ /* order is important - we want to measure the cycle count first here! */
+ for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+ pEvent->counters_after[i] = mvCpuCntrsRead(i);
+#else
+ pEvent->counters_after[2] = mvCpuCntrsRead(2);
+ pEvent->counters_after[0] = mvCpuCntrsRead(0);
+ pEvent->counters_after[3] = mvCpuCntrsRead(3);
+ pEvent->counters_after[1] = mvCpuCntrsRead(1);
+#endif
+
+ for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+ {
+ pEvent->counters_sum[i] += (pEvent->counters_after[i] - pEvent->counters_before[i]);
+ }
+ pEvent->num_of_measurements++;
+}
+
+
+#ifdef CONFIG_MV_CPU_PERF_CNTRS
+
+#define MV_CPU_CNTRS_READ(counter) mvCpuCntrsRead(counter)
+
+#define MV_CPU_CNTRS_START(event) mvCpuCntrsReadBefore(event)
+
+#define MV_CPU_CNTRS_STOP(event) mvCpuCntrsReadAfter(event)
+
+#define MV_CPU_CNTRS_SHOW(event) mvCpuCntrsShow(event)
+
+#else
+
+#define MV_CPU_CNTRS_READ(counter)
+#define MV_CPU_CNTRS_START(event)
+#define MV_CPU_CNTRS_STOP(event)
+#define MV_CPU_CNTRS_SHOW(event)
+
+#endif /* CONFIG_MV_CPU_PERF_CNTRS */
+
+
+#endif /* __mvCpuCntrs_h__ */
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include "mvOs.h"
+#include "mvCpuL2Cntrs.h"
+
+
+
+MV_CPU_L2_CNTRS_ENTRY mvCpuL2CntrsTbl[MV_CPU_L2_CNTRS_NUM];
+
+MV_CPU_L2_CNTRS_EVENT* mvCpuL2CntrsEventTbl[128];
+
+void mvCpuL2CntrsReset(void)
+{
+ MV_U32 reg = 0;
+
+ MV_ASM ("mcr p15, 6, %0, c15, c13, 0" : : "r" (reg));
+ MV_ASM ("mcr p15, 6, %0, c15, c13, 1" : : "r" (reg));
+ MV_ASM ("mcr p15, 6, %0, c15, c13, 2" : : "r" (reg));
+ MV_ASM ("mcr p15, 6, %0, c15, c13, 3" : : "r" (reg));
+}
+
+static void mvCpuL2CntrConfig(int counter, int op)
+{
+ MV_U32 reg = (1 << op) | 0x1; /*enable*/
+
+ switch(counter)
+ {
+ case 0:
+ MV_ASM ("mcr p15, 6, %0, c15, c12, 0" : : "r" (reg));
+ return;
+
+ case 1:
+ MV_ASM ("mcr p15, 6, %0, c15, c12, 1" : : "r" (reg));
+ return;
+
+ default:
+ mvOsPrintf("mvCpuL2CntrConfig: bad counter number (%d)\n", counter);
+ }
+ return;
+}
+
+void mvCpuL2CntrsEventClear(MV_CPU_L2_CNTRS_EVENT* pEvent)
+{
+ int i;
+
+ for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+ {
+ pEvent->counters_sum[i] = 0;
+ }
+ pEvent->num_of_measurements = 0;
+}
+
+
+MV_CPU_L2_CNTRS_EVENT* mvCpuL2CntrsEventCreate(char* name, MV_U32 print_threshold)
+{
+ int i;
+ MV_CPU_L2_CNTRS_EVENT* event = mvOsMalloc(sizeof(MV_CPU_L2_CNTRS_EVENT));
+
+ if(event)
+ {
+ strncpy(event->name, name, sizeof(event->name));
+ event->num_of_measurements = 0;
+ event->avg_sample_count = print_threshold;
+ for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+ {
+ event->counters_before[i] = 0;
+ event->counters_after[i] = 0;
+ event->counters_sum[i] = 0;
+ }
+ }
+ return event;
+}
+
+void mvCpuL2CntrsEventDelete(MV_CPU_L2_CNTRS_EVENT* event)
+{
+ if(event != NULL)
+ mvOsFree(event);
+}
+
+
+MV_STATUS mvCpuL2CntrsProgram(int counter, MV_CPU_L2_CNTRS_OPS op,
+ char* name, MV_U32 overhead)
+{
+ strncpy(mvCpuL2CntrsTbl[counter].name, name, sizeof(mvCpuL2CntrsTbl[counter].name));
+ mvCpuL2CntrsTbl[counter].operation = op;
+ mvCpuL2CntrsTbl[counter].opIdx = op;
+ mvCpuL2CntrsTbl[counter].overhead = overhead;
+ mvCpuL2CntrConfig(counter, op);
+ mvOsPrintf("CPU L2 Counter %d: operation=%d, overhead=%d\n",
+ counter, op, overhead);
+ return MV_OK;
+}
+
+void mvCpuL2CntrsShow(MV_CPU_L2_CNTRS_EVENT* pEvent)
+{
+ int i;
+ MV_U64 counters_avg;
+
+ if(pEvent->num_of_measurements < pEvent->avg_sample_count)
+ return;
+
+ mvOsPrintf("%16s: ", pEvent->name);
+ for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+ {
+ counters_avg = mvOsDivMod64(pEvent->counters_sum[i],
+ pEvent->num_of_measurements, NULL);
+
+ if(counters_avg >= mvCpuL2CntrsTbl[i].overhead)
+ counters_avg -= mvCpuL2CntrsTbl[i].overhead;
+ else
+ counters_avg = 0;
+
+ mvOsPrintf("%s=%5llu, ", mvCpuL2CntrsTbl[i].name, counters_avg);
+ }
+ mvOsPrintf("\n");
+ mvCpuL2CntrsEventClear(pEvent);
+ mvCpuL2CntrsReset();
+}
+
+void mvCpuL2CntrsStatus(void)
+{
+ int i;
+
+ for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+ {
+ mvOsPrintf("#%d: %s, overhead=%d\n",
+ i, mvCpuL2CntrsTbl[i].name, mvCpuL2CntrsTbl[i].overhead);
+ }
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+*******************************************************************************/
+#ifndef __mvCpuL2Cntrs_h__
+#define __mvCpuL2Cntrs_h__
+
+#include "mvTypes.h"
+#include "mvOs.h"
+
+
+#define MV_CPU_L2_CNTRS_NUM 2
+
+typedef enum
+{
+ MV_CPU_L2_CNTRS_ENABLE = 0,
+ MV_CPU_L2_CNTRS_DATA_REQ,
+ MV_CPU_L2_CNTRS_DATA_MISS_REQ,
+ MV_CPU_L2_CNTRS_INST_REQ,
+ MV_CPU_L2_CNTRS_INST_MISS_REQ,
+ MV_CPU_L2_CNTRS_DATA_READ_REQ,
+ MV_CPU_L2_CNTRS_DATA_READ_MISS_REQ,
+ MV_CPU_L2_CNTRS_DATA_WRITE_REQ,
+ MV_CPU_L2_CNTRS_DATA_WRITE_MISS_REQ,
+ MV_CPU_L2_CNTRS_RESERVED,
+ MV_CPU_L2_CNTRS_DIRTY_EVICT_REQ,
+ MV_CPU_L2_CNTRS_EVICT_BUFF_STALL,
+ MV_CPU_L2_CNTRS_ACTIVE_CYCLES,
+
+} MV_CPU_L2_CNTRS_OPS;
+
+typedef struct
+{
+ char name[16];
+ MV_CPU_L2_CNTRS_OPS operation;
+ int opIdx;
+ MV_U32 overhead;
+
+} MV_CPU_L2_CNTRS_ENTRY;
+
+
+typedef struct
+{
+ char name[16];
+ MV_U32 num_of_measurements;
+ MV_U32 avg_sample_count;
+ MV_U64 counters_before[MV_CPU_L2_CNTRS_NUM];
+ MV_U64 counters_after[MV_CPU_L2_CNTRS_NUM];
+ MV_U64 counters_sum[MV_CPU_L2_CNTRS_NUM];
+
+} MV_CPU_L2_CNTRS_EVENT;
+
+
+MV_STATUS mvCpuL2CntrsProgram(int counter, MV_CPU_L2_CNTRS_OPS op,
+ char* name, MV_U32 overhead);
+void mvCpuL2CntrsInit(void);
+MV_CPU_L2_CNTRS_EVENT* mvCpuL2CntrsEventCreate(char* name, MV_U32 print_threshold);
+void mvCpuL2CntrsEventDelete(MV_CPU_L2_CNTRS_EVENT* event);
+void mvCpuL2CntrsReset(void);
+void mvCpuL2CntrsShow(MV_CPU_L2_CNTRS_EVENT* pEvent);
+void mvCpuL2CntrsEventClear(MV_CPU_L2_CNTRS_EVENT* pEvent);
+
+static INLINE MV_U64 mvCpuL2CntrsRead(const int counter)
+{
+ MV_U32 low = 0, high = 0;
+
+ switch(counter)
+ {
+ case 0:
+ MV_ASM ("mrc p15, 6, %0, c15, c13, 0" : "=r" (low));
+ MV_ASM ("mrc p15, 6, %0, c15, c13, 1" : "=r" (high));
+ break;
+
+ case 1:
+ MV_ASM ("mrc p15, 6, %0, c15, c13, 2" : "=r" (low));
+ MV_ASM ("mrc p15, 6, %0, c15, c13, 3" : "=r" (high));
+ break;
+
+ default:
+ mvOsPrintf("mvCpuL2CntrsRead: bad counter number (%d)\n", counter);
+ }
+ return (((MV_U64)high << 32 ) | low);
+
+}
+
+static INLINE void mvCpuL2CntrsReadBefore(MV_CPU_L2_CNTRS_EVENT* pEvent)
+{
+ int i;
+
+ for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+ pEvent->counters_before[i] = mvCpuL2CntrsRead(i);
+}
+
+static INLINE void mvCpuL2CntrsReadAfter(MV_CPU_L2_CNTRS_EVENT* pEvent)
+{
+ int i;
+
+ for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+ {
+ pEvent->counters_after[i] = mvCpuL2CntrsRead(i);
+ pEvent->counters_sum[i] += (pEvent->counters_after[i] - pEvent->counters_before[i]);
+ }
+ pEvent->num_of_measurements++;
+}
+
+
+#ifdef CONFIG_MV_CPU_L2_PERF_CNTRS
+
+#define MV_CPU_L2_CNTRS_READ(counter) mvCpuL2CntrsRead(counter)
+
+#define MV_CPU_L2_CNTRS_START(event) mvCpuL2CntrsReadBefore(event)
+
+#define MV_CPU_L2_CNTRS_STOP(event) mvCpuL2CntrsReadAfter(event)
+
+#define MV_CPU_L2_CNTRS_SHOW(event) mvCpuL2CntrsShow(event)
+
+#else
+
+#define MV_CPU_L2_CNTRS_READ(counter)
+#define MV_CPU_L2_CNTRS_START(event)
+#define MV_CPU_L2_CNTRS_STOP(event)
+#define MV_CPU_L2_CNTRS_SHOW(event)
+
+#endif /* CONFIG_MV_CPU_L2_PERF_CNTRS */
+
+
+#endif /* __mvCpuL2Cntrs_h__ */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "ddr1_2/mvDram.h"
+#include "boardEnv/mvBoardEnvLib.h"
+
+#undef MV_DEBUG
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo,
+ MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32 cas2ps(MV_U8 spd_byte);
+/*******************************************************************************
+* mvDramBankGet - Get the DRAM bank paramters.
+*
+* DESCRIPTION:
+* This function retrieves DRAM bank parameters as described in
+* DRAM_BANK_INFO struct to the controller DRAM unit. In case the board
+* has its DRAM on DIMMs it will use its EEPROM to extract SPD data
+* from it. Otherwise, if the DRAM is soldered on board, the function
+* should insert its bank information into MV_DRAM_BANK_INFO struct.
+*
+* INPUT:
+* bankNum - Board DRAM bank number.
+*
+* OUTPUT:
+* pBankInfo - DRAM bank information struct.
+*
+* RETURN:
+* MV_FAIL - Bank parameters could not be read.
+*
+*******************************************************************************/
+MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo)
+{
+ MV_DIMM_INFO dimmInfo;
+
+ DB(mvOsPrintf("Dram: mvDramBankInfoGet bank %d\n", bankNum));
+ /* zero pBankInfo structure */
+ memset(pBankInfo, 0, sizeof(*pBankInfo));
+
+ if((NULL == pBankInfo) || (bankNum >= MV_DRAM_MAX_CS ))
+ {
+ DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n"));
+ return MV_BAD_PARAM;
+ }
+ if( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo))
+ {
+ DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n"));
+ return MV_FAIL;
+ }
+ if((dimmInfo.numOfModuleBanks == 1) && ((bankNum % 2) == 1))
+ {
+ DB(mvOsPrintf("Dram: ERR dimmSpdGet. Can't find DIMM bank 2 \n"));
+ return MV_FAIL;
+ }
+
+ /* convert Dimm info to Bank info */
+ cpyDimm2BankInfo(&dimmInfo, pBankInfo);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* cpyDimm2BankInfo - Convert a Dimm info struct into a bank info struct.
+*
+* DESCRIPTION:
+* Convert a Dimm info struct into a bank info struct.
+*
+* INPUT:
+* pDimmInfo - DIMM information structure.
+*
+* OUTPUT:
+* pBankInfo - DRAM bank information struct.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo,
+ MV_DRAM_BANK_INFO *pBankInfo)
+{
+ pBankInfo->memoryType = pDimmInfo->memoryType;
+
+ /* DIMM dimensions */
+ pBankInfo->numOfRowAddr = pDimmInfo->numOfRowAddr;
+ pBankInfo->numOfColAddr = pDimmInfo->numOfColAddr;
+ pBankInfo->dataWidth = pDimmInfo->dataWidth;
+ pBankInfo->errorCheckType = pDimmInfo->errorCheckType;
+ pBankInfo->sdramWidth = pDimmInfo->sdramWidth;
+ pBankInfo->errorCheckDataWidth = pDimmInfo->errorCheckDataWidth;
+ pBankInfo->numOfBanksOnEachDevice = pDimmInfo->numOfBanksOnEachDevice;
+ pBankInfo->suportedCasLatencies = pDimmInfo->suportedCasLatencies;
+ pBankInfo->refreshInterval = pDimmInfo->refreshInterval;
+
+ /* DIMM timing parameters */
+ pBankInfo->minCycleTimeAtMaxCasLatPs = pDimmInfo->minCycleTimeAtMaxCasLatPs;
+ pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps =
+ pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps;
+ pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps =
+ pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps;
+
+ pBankInfo->minRowPrechargeTime = pDimmInfo->minRowPrechargeTime;
+ pBankInfo->minRowActiveToRowActive = pDimmInfo->minRowActiveToRowActive;
+ pBankInfo->minRasToCasDelay = pDimmInfo->minRasToCasDelay;
+ pBankInfo->minRasPulseWidth = pDimmInfo->minRasPulseWidth;
+ pBankInfo->minWriteRecoveryTime = pDimmInfo->minWriteRecoveryTime;
+ pBankInfo->minWriteToReadCmdDelay = pDimmInfo->minWriteToReadCmdDelay;
+ pBankInfo->minReadToPrechCmdDelay = pDimmInfo->minReadToPrechCmdDelay;
+ pBankInfo->minRefreshToActiveCmd = pDimmInfo->minRefreshToActiveCmd;
+
+ /* Parameters calculated from the extracted DIMM information */
+ pBankInfo->size = pDimmInfo->size/pDimmInfo->numOfModuleBanks;
+ pBankInfo->deviceDensity = pDimmInfo->deviceDensity;
+ pBankInfo->numberOfDevices = pDimmInfo->numberOfDevices /
+ pDimmInfo->numOfModuleBanks;
+
+ /* DIMM attributes (MV_TRUE for yes) */
+
+ if ((pDimmInfo->memoryType == MEM_TYPE_SDRAM) ||
+ (pDimmInfo->memoryType == MEM_TYPE_DDR1) )
+ {
+ if (pDimmInfo->dimmAttributes & BIT1)
+ pBankInfo->registeredAddrAndControlInputs = MV_TRUE;
+ else
+ pBankInfo->registeredAddrAndControlInputs = MV_FALSE;
+ }
+ else /* pDimmInfo->memoryType == MEM_TYPE_DDR2 */
+ {
+ if (pDimmInfo->dimmTypeInfo & (BIT0 | BIT4))
+ pBankInfo->registeredAddrAndControlInputs = MV_TRUE;
+ else
+ pBankInfo->registeredAddrAndControlInputs = MV_FALSE;
+ }
+
+ return;
+}
+
+/*******************************************************************************
+* dimmSpdCpy - Cpy SPD parameters from dimm 0 to dimm 1.
+*
+* DESCRIPTION:
+* Read the DIMM SPD parameters from dimm 0 into dimm 1 SPD.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise.
+*
+*******************************************************************************/
+MV_STATUS dimmSpdCpy(MV_VOID)
+{
+ MV_U32 i;
+ MV_U32 spdChecksum;
+
+ MV_TWSI_SLAVE twsiSlave;
+ MV_U8 data[SPD_SIZE];
+
+ /* zero dimmInfo structure */
+ memset(data, 0, SPD_SIZE);
+
+ /* read the dimm eeprom */
+ DB(mvOsPrintf("DRAM: Read Dimm eeprom\n"));
+ twsiSlave.slaveAddr.address = MV_BOARD_DIMM0_I2C_ADDR;
+ twsiSlave.slaveAddr.type = ADDR7_BIT;
+ twsiSlave.validOffset = MV_TRUE;
+ twsiSlave.offset = 0;
+ twsiSlave.moreThen256 = MV_FALSE;
+
+ if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL,
+ &twsiSlave, data, SPD_SIZE) )
+ {
+ DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 0\n"));
+ return MV_FAIL;
+ }
+ DB(puts("DRAM: Reading dimm info succeded.\n"));
+
+ /* calculate SPD checksum */
+ spdChecksum = 0;
+
+ for(i = 0 ; i <= 62 ; i++)
+ {
+ spdChecksum += data[i];
+ }
+
+ if ((spdChecksum & 0xff) != data[63])
+ {
+ DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n",
+ (MV_U32)(spdChecksum & 0xff), data[63]));
+ }
+ else
+ {
+ DB(mvOsPrintf("DRAM: SPD Checksum ok!\n"));
+ }
+
+ /* copy the SPD content 1:1 into the DIMM 1 SPD */
+ twsiSlave.slaveAddr.address = MV_BOARD_DIMM1_I2C_ADDR;
+ twsiSlave.slaveAddr.type = ADDR7_BIT;
+ twsiSlave.validOffset = MV_TRUE;
+ twsiSlave.offset = 0;
+ twsiSlave.moreThen256 = MV_FALSE;
+
+ for(i = 0 ; i < SPD_SIZE ; i++)
+ {
+ twsiSlave.offset = i;
+ if( MV_OK != mvTwsiWrite (MV_BOARD_DIMM_I2C_CHANNEL,
+ &twsiSlave, &data[i], 1) )
+ {
+ mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 1 byte %d \n",i);
+ return MV_FAIL;
+ }
+ mvOsDelay(5);
+ }
+
+ DB(puts("DRAM: Reading dimm info succeded.\n"));
+ return MV_OK;
+}
+
+/*******************************************************************************
+* dimmSpdGet - Get the SPD parameters.
+*
+* DESCRIPTION:
+* Read the DIMM SPD parameters into given struct parameter.
+*
+* INPUT:
+* dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator.
+*
+* OUTPUT:
+* pDimmInfo - DIMM information structure.
+*
+* RETURN:
+* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise.
+*
+*******************************************************************************/
+MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo)
+{
+ MV_U32 i;
+ MV_U32 density = 1;
+ MV_U32 spdChecksum;
+
+ MV_TWSI_SLAVE twsiSlave;
+ MV_U8 data[SPD_SIZE];
+
+ if((NULL == pDimmInfo)|| (dimmNum >= MAX_DIMM_NUM))
+ {
+ DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n"));
+ return MV_BAD_PARAM;
+ }
+
+ /* zero dimmInfo structure */
+ memset(data, 0, SPD_SIZE);
+
+ /* read the dimm eeprom */
+ DB(mvOsPrintf("DRAM: Read Dimm eeprom\n"));
+ twsiSlave.slaveAddr.address = (dimmNum == 0) ?
+ MV_BOARD_DIMM0_I2C_ADDR : MV_BOARD_DIMM1_I2C_ADDR;
+ twsiSlave.slaveAddr.type = ADDR7_BIT;
+ twsiSlave.validOffset = MV_TRUE;
+ twsiSlave.offset = 0;
+ twsiSlave.moreThen256 = MV_FALSE;
+
+ if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL,
+ &twsiSlave, data, SPD_SIZE) )
+ {
+ DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum %d \n", dimmNum));
+ return MV_FAIL;
+ }
+ DB(puts("DRAM: Reading dimm info succeded.\n"));
+
+ /* calculate SPD checksum */
+ spdChecksum = 0;
+
+ for(i = 0 ; i <= 62 ; i++)
+ {
+ spdChecksum += data[i];
+ }
+
+ if ((spdChecksum & 0xff) != data[63])
+ {
+ DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n",
+ (MV_U32)(spdChecksum & 0xff), data[63]));
+ }
+ else
+ {
+ DB(mvOsPrintf("DRAM: SPD Checksum ok!\n"));
+ }
+
+ /* copy the SPD content 1:1 into the dimmInfo structure*/
+ for(i = 0 ; i < SPD_SIZE ; i++)
+ {
+ pDimmInfo->spdRawData[i] = data[i];
+ DB(mvOsPrintf("SPD-EEPROM Byte %3d = %3x (%3d)\n",i, data[i], data[i]));
+ }
+
+ DB(mvOsPrintf("DRAM SPD Information:\n"));
+
+ /* Memory type (DDR / SDRAM) */
+ switch (data[DIMM_MEM_TYPE])
+ {
+ case (DIMM_MEM_TYPE_SDRAM):
+ pDimmInfo->memoryType = MEM_TYPE_SDRAM;
+ DB(mvOsPrintf("DRAM Memeory type SDRAM\n"));
+ break;
+ case (DIMM_MEM_TYPE_DDR1):
+ pDimmInfo->memoryType = MEM_TYPE_DDR1;
+ DB(mvOsPrintf("DRAM Memeory type DDR1\n"));
+ break;
+ case (DIMM_MEM_TYPE_DDR2):
+ pDimmInfo->memoryType = MEM_TYPE_DDR2;
+ DB(mvOsPrintf("DRAM Memeory type DDR2\n"));
+ break;
+ default:
+ mvOsPrintf("ERROR: Undefined memory type!\n");
+ return MV_ERROR;
+ }
+
+
+ /* Number Of Row Addresses */
+ pDimmInfo->numOfRowAddr = data[DIMM_ROW_NUM];
+ DB(mvOsPrintf("DRAM numOfRowAddr[3] %d\n",pDimmInfo->numOfRowAddr));
+
+ /* Number Of Column Addresses */
+ pDimmInfo->numOfColAddr = data[DIMM_COL_NUM];
+ DB(mvOsPrintf("DRAM numOfColAddr[4] %d\n",pDimmInfo->numOfColAddr));
+
+ /* Number Of Module Banks */
+ pDimmInfo->numOfModuleBanks = data[DIMM_MODULE_BANK_NUM];
+ DB(mvOsPrintf("DRAM numOfModuleBanks[5] 0x%x\n",
+ pDimmInfo->numOfModuleBanks));
+
+ /* Number of module banks encoded differently for DDR2 */
+ if (pDimmInfo->memoryType == MEM_TYPE_DDR2)
+ pDimmInfo->numOfModuleBanks = (pDimmInfo->numOfModuleBanks & 0x7)+1;
+
+ /* Data Width */
+ pDimmInfo->dataWidth = data[DIMM_DATA_WIDTH];
+ DB(mvOsPrintf("DRAM dataWidth[6] 0x%x\n", pDimmInfo->dataWidth));
+
+ /* Minimum Cycle Time At Max CasLatancy */
+ pDimmInfo->minCycleTimeAtMaxCasLatPs = cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS]);
+
+ /* Error Check Type */
+ pDimmInfo->errorCheckType = data[DIMM_ERR_CHECK_TYPE];
+ DB(mvOsPrintf("DRAM errorCheckType[11] 0x%x\n",
+ pDimmInfo->errorCheckType));
+
+ /* Refresh Interval */
+ pDimmInfo->refreshInterval = data[DIMM_REFRESH_INTERVAL];
+ DB(mvOsPrintf("DRAM refreshInterval[12] 0x%x\n",
+ pDimmInfo->refreshInterval));
+
+ /* Sdram Width */
+ pDimmInfo->sdramWidth = data[DIMM_SDRAM_WIDTH];
+ DB(mvOsPrintf("DRAM sdramWidth[13] 0x%x\n",pDimmInfo->sdramWidth));
+
+ /* Error Check Data Width */
+ pDimmInfo->errorCheckDataWidth = data[DIMM_ERR_CHECK_DATA_WIDTH];
+ DB(mvOsPrintf("DRAM errorCheckDataWidth[14] 0x%x\n",
+ pDimmInfo->errorCheckDataWidth));
+
+ /* Burst Length Supported */
+ /* SDRAM/DDR1:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 *
+ *********************************************************/
+ /* DDR2:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD *
+ *********************************************************/
+
+ pDimmInfo->burstLengthSupported = data[DIMM_BURST_LEN_SUP];
+ DB(mvOsPrintf("DRAM burstLengthSupported[16] 0x%x\n",
+ pDimmInfo->burstLengthSupported));
+
+ /* Number Of Banks On Each Device */
+ pDimmInfo->numOfBanksOnEachDevice = data[DIMM_DEV_BANK_NUM];
+ DB(mvOsPrintf("DRAM numOfBanksOnEachDevice[17] 0x%x\n",
+ pDimmInfo->numOfBanksOnEachDevice));
+
+ /* Suported Cas Latencies */
+
+ /* SDRAM:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 *
+ ********************************************************/
+
+ /* DDR 1:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 *
+ *********************************************************/
+
+ /* DDR 2:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD *
+ *********************************************************/
+
+ pDimmInfo->suportedCasLatencies = data[DIMM_SUP_CAL];
+ DB(mvOsPrintf("DRAM suportedCasLatencies[18] 0x%x\n",
+ pDimmInfo->suportedCasLatencies));
+
+ /* For DDR2 only, get the DIMM type information */
+ if (pDimmInfo->memoryType == MEM_TYPE_DDR2)
+ {
+ pDimmInfo->dimmTypeInfo = data[DIMM_DDR2_TYPE_INFORMATION];
+ DB(mvOsPrintf("DRAM dimmTypeInfo[20] (DDR2) 0x%x\n",
+ pDimmInfo->dimmTypeInfo));
+ }
+
+ /* SDRAM Modules Attributes */
+ pDimmInfo->dimmAttributes = data[DIMM_BUF_ADDR_CONT_IN];
+ DB(mvOsPrintf("DRAM dimmAttributes[21] 0x%x\n",
+ pDimmInfo->dimmAttributes));
+
+ /* Minimum Cycle Time At Max CasLatancy Minus 1*/
+ pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps =
+ cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS1]);
+
+ /* Minimum Cycle Time At Max CasLatancy Minus 2*/
+ pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps =
+ cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS2]);
+
+ pDimmInfo->minRowPrechargeTime = data[DIMM_MIN_ROW_PRECHARGE_TIME];
+ DB(mvOsPrintf("DRAM minRowPrechargeTime[27] 0x%x\n",
+ pDimmInfo->minRowPrechargeTime));
+ pDimmInfo->minRowActiveToRowActive = data[DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE];
+ DB(mvOsPrintf("DRAM minRowActiveToRowActive[28] 0x%x\n",
+ pDimmInfo->minRowActiveToRowActive));
+ pDimmInfo->minRasToCasDelay = data[DIMM_MIN_RAS_TO_CAS_DELAY];
+ DB(mvOsPrintf("DRAM minRasToCasDelay[29] 0x%x\n",
+ pDimmInfo->minRasToCasDelay));
+ pDimmInfo->minRasPulseWidth = data[DIMM_MIN_RAS_PULSE_WIDTH];
+ DB(mvOsPrintf("DRAM minRasPulseWidth[30] 0x%x\n",
+ pDimmInfo->minRasPulseWidth));
+
+ /* DIMM Bank Density */
+ pDimmInfo->dimmBankDensity = data[DIMM_BANK_DENSITY];
+ DB(mvOsPrintf("DRAM dimmBankDensity[31] 0x%x\n",
+ pDimmInfo->dimmBankDensity));
+
+ /* Only DDR2 includes Write Recovery Time field. Other SDRAM ignore */
+ pDimmInfo->minWriteRecoveryTime = data[DIMM_MIN_WRITE_RECOVERY_TIME];
+ DB(mvOsPrintf("DRAM minWriteRecoveryTime[36] 0x%x\n",
+ pDimmInfo->minWriteRecoveryTime));
+
+ /* Only DDR2 includes Internal Write To Read Command Delay field. */
+ pDimmInfo->minWriteToReadCmdDelay = data[DIMM_MIN_WRITE_TO_READ_CMD_DELAY];
+ DB(mvOsPrintf("DRAM minWriteToReadCmdDelay[37] 0x%x\n",
+ pDimmInfo->minWriteToReadCmdDelay));
+
+ /* Only DDR2 includes Internal Read To Precharge Command Delay field. */
+ pDimmInfo->minReadToPrechCmdDelay = data[DIMM_MIN_READ_TO_PRECH_CMD_DELAY];
+ DB(mvOsPrintf("DRAM minReadToPrechCmdDelay[38] 0x%x\n",
+ pDimmInfo->minReadToPrechCmdDelay));
+
+ /* Only DDR2 includes Minimum Refresh to Activate/Refresh Command field */
+ pDimmInfo->minRefreshToActiveCmd = data[DIMM_MIN_REFRESH_TO_ACTIVATE_CMD];
+ DB(mvOsPrintf("DRAM minRefreshToActiveCmd[42] 0x%x\n",
+ pDimmInfo->minRefreshToActiveCmd));
+
+ /* calculating the sdram density. Representing device density from */
+ /* bit 20 to allow representation of 4GB and above. */
+ /* For example, if density is 512Mbit 0x20000000, will be represent in */
+ /* deviceDensity by 0x20000000 >> 16 --> 0x00000200. Another example */
+ /* is density 8GB 0x200000000 >> 16 --> 0x00002000. */
+ density = (1 << ((pDimmInfo->numOfRowAddr + pDimmInfo->numOfColAddr) - 20));
+ pDimmInfo->deviceDensity = density *
+ pDimmInfo->numOfBanksOnEachDevice *
+ pDimmInfo->sdramWidth;
+ DB(mvOsPrintf("DRAM deviceDensity %d\n",pDimmInfo->deviceDensity));
+
+ /* Number of devices includeing Error correction */
+ pDimmInfo->numberOfDevices = (pDimmInfo->dataWidth/pDimmInfo->sdramWidth) *
+ pDimmInfo->numOfModuleBanks;
+ DB(mvOsPrintf("DRAM numberOfDevices %d\n",
+ pDimmInfo->numberOfDevices));
+
+ pDimmInfo->size = 0;
+
+ /* Note that pDimmInfo->size is in MB units */
+ if (pDimmInfo->memoryType == MEM_TYPE_SDRAM)
+ {
+ if (pDimmInfo->dimmBankDensity & BIT0)
+ pDimmInfo->size += 1024; /* Equal to 1GB */
+ else if (pDimmInfo->dimmBankDensity & BIT1)
+ pDimmInfo->size += 8; /* Equal to 8MB */
+ else if (pDimmInfo->dimmBankDensity & BIT2)
+ pDimmInfo->size += 16; /* Equal to 16MB */
+ else if (pDimmInfo->dimmBankDensity & BIT3)
+ pDimmInfo->size += 32; /* Equal to 32MB */
+ else if (pDimmInfo->dimmBankDensity & BIT4)
+ pDimmInfo->size += 64; /* Equal to 64MB */
+ else if (pDimmInfo->dimmBankDensity & BIT5)
+ pDimmInfo->size += 128; /* Equal to 128MB */
+ else if (pDimmInfo->dimmBankDensity & BIT6)
+ pDimmInfo->size += 256; /* Equal to 256MB */
+ else if (pDimmInfo->dimmBankDensity & BIT7)
+ pDimmInfo->size += 512; /* Equal to 512MB */
+ }
+ else if (pDimmInfo->memoryType == MEM_TYPE_DDR1)
+ {
+ if (pDimmInfo->dimmBankDensity & BIT0)
+ pDimmInfo->size += 1024; /* Equal to 1GB */
+ else if (pDimmInfo->dimmBankDensity & BIT1)
+ pDimmInfo->size += 2048; /* Equal to 2GB */
+ else if (pDimmInfo->dimmBankDensity & BIT2)
+ pDimmInfo->size += 16; /* Equal to 16MB */
+ else if (pDimmInfo->dimmBankDensity & BIT3)
+ pDimmInfo->size += 32; /* Equal to 32MB */
+ else if (pDimmInfo->dimmBankDensity & BIT4)
+ pDimmInfo->size += 64; /* Equal to 64MB */
+ else if (pDimmInfo->dimmBankDensity & BIT5)
+ pDimmInfo->size += 128; /* Equal to 128MB */
+ else if (pDimmInfo->dimmBankDensity & BIT6)
+ pDimmInfo->size += 256; /* Equal to 256MB */
+ else if (pDimmInfo->dimmBankDensity & BIT7)
+ pDimmInfo->size += 512; /* Equal to 512MB */
+ }
+ else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+ {
+ if (pDimmInfo->dimmBankDensity & BIT0)
+ pDimmInfo->size += 1024; /* Equal to 1GB */
+ else if (pDimmInfo->dimmBankDensity & BIT1)
+ pDimmInfo->size += 2048; /* Equal to 2GB */
+ else if (pDimmInfo->dimmBankDensity & BIT2)
+ pDimmInfo->size += 4096; /* Equal to 4GB */
+ else if (pDimmInfo->dimmBankDensity & BIT3)
+ pDimmInfo->size += 8192; /* Equal to 8GB */
+ else if (pDimmInfo->dimmBankDensity & BIT4)
+ pDimmInfo->size += 16384; /* Equal to 16GB */
+ else if (pDimmInfo->dimmBankDensity & BIT5)
+ pDimmInfo->size += 128; /* Equal to 128MB */
+ else if (pDimmInfo->dimmBankDensity & BIT6)
+ pDimmInfo->size += 256; /* Equal to 256MB */
+ else if (pDimmInfo->dimmBankDensity & BIT7)
+ pDimmInfo->size += 512; /* Equal to 512MB */
+ }
+
+ pDimmInfo->size *= pDimmInfo->numOfModuleBanks;
+
+ DB(mvOsPrintf("Dram: dimm size %dMB \n",pDimmInfo->size));
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* dimmSpdPrint - Print the SPD parameters.
+*
+* DESCRIPTION:
+* Print the Dimm SPD parameters.
+*
+* INPUT:
+* pDimmInfo - DIMM information structure.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID dimmSpdPrint(MV_U32 dimmNum)
+{
+ MV_DIMM_INFO dimmInfo;
+ MV_U32 i, temp = 0;
+ MV_U32 k, maskLeftOfPoint = 0, maskRightOfPoint = 0;
+ MV_U32 rightOfPoint = 0,leftOfPoint = 0, div, time_tmp, shift;
+ MV_U32 busClkPs;
+ MV_U8 trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks,
+ temp_buf[40], *spdRawData;
+
+ busClkPs = 1000000000 / (mvBoardSysClkGet() / 100); /* in 10 ps units */
+
+ spdRawData = dimmInfo.spdRawData;
+
+ if(MV_OK != dimmSpdGet(dimmNum, &dimmInfo))
+ {
+ mvOsOutput("ERROR: Could not read SPD information!\n");
+ return;
+ }
+
+ /* find Manufactura of Dimm Module */
+ mvOsOutput("\nManufacturer's JEDEC ID Code: ");
+ for(i = 0 ; i < DIMM_MODULE_MANU_SIZE ; i++)
+ {
+ mvOsOutput("%x",spdRawData[DIMM_MODULE_MANU_OFFS + i]);
+ }
+ mvOsOutput("\n");
+
+ /* Manufacturer's Specific Data */
+ for(i = 0 ; i < DIMM_MODULE_ID_SIZE ; i++)
+ {
+ temp_buf[i] = spdRawData[DIMM_MODULE_ID_OFFS + i];
+ }
+ mvOsOutput("Manufacturer's Specific Data: %s\n", temp_buf);
+
+ /* Module Part Number */
+ for(i = 0 ; i < DIMM_MODULE_VEN_SIZE ; i++)
+ {
+ temp_buf[i] = spdRawData[DIMM_MODULE_VEN_OFFS + i];
+ }
+ mvOsOutput("Module Part Number: %s\n", temp_buf);
+
+ /* Module Serial Number */
+ for(i = 0; i < sizeof(MV_U32); i++)
+ {
+ temp |= spdRawData[95+i] << 8*i;
+ }
+ mvOsOutput("DIMM Serial No. %ld (%lx)\n", (long)temp,
+ (long)temp);
+
+ /* find Manufac-Data of Dimm Module */
+ mvOsOutput("Manufactoring Date: Year 20%d%d/ ww %d%d\n",
+ ((spdRawData[93] & 0xf0) >> 4), (spdRawData[93] & 0xf),
+ ((spdRawData[94] & 0xf0) >> 4), (spdRawData[94] & 0xf));
+ /* find modul_revision of Dimm Module */
+ mvOsOutput("Module Revision: %d.%d\n",
+ spdRawData[91], spdRawData[92]);
+
+ /* find manufac_place of Dimm Module */
+ mvOsOutput("manufac_place: %d\n", spdRawData[72]);
+
+ /* go over the first 35 I2C data bytes */
+ for(i = 2 ; i <= 35 ; i++)
+ switch(i)
+ {
+ case 2: /* Memory type (DDR1/2 / SDRAM) */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ mvOsOutput("Dram Type is: SDRAM\n");
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+ mvOsOutput("Dram Type is: SDRAM DDR1\n");
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+ mvOsOutput("Dram Type is: SDRAM DDR2\n");
+ else
+ mvOsOutput("Dram Type unknown\n");
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 3: /* Number Of Row Addresses */
+ mvOsOutput("Module Number of row addresses: %d\n",
+ dimmInfo.numOfRowAddr);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 4: /* Number Of Column Addresses */
+ mvOsOutput("Module Number of col addresses: %d\n",
+ dimmInfo.numOfColAddr);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 5: /* Number Of Module Banks */
+ mvOsOutput("Number of Banks on Mod.: %d\n",
+ dimmInfo.numOfModuleBanks);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 6: /* Data Width */
+ mvOsOutput("Module Data Width: %d bit\n",
+ dimmInfo.dataWidth);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 8: /* Voltage Interface */
+ switch(spdRawData[i])
+ {
+ case 0x0:
+ mvOsOutput("Module is TTL_5V_TOLERANT\n");
+ break;
+ case 0x1:
+ mvOsOutput("Module is LVTTL\n");
+ break;
+ case 0x2:
+ mvOsOutput("Module is HSTL_1_5V\n");
+ break;
+ case 0x3:
+ mvOsOutput("Module is SSTL_3_3V\n");
+ break;
+ case 0x4:
+ mvOsOutput("Module is SSTL_2_5V\n");
+ break;
+ case 0x5:
+ if (dimmInfo.memoryType != MEM_TYPE_SDRAM)
+ {
+ mvOsOutput("Module is SSTL_1_8V\n");
+ break;
+ }
+ default:
+ mvOsOutput("Module is VOLTAGE_UNKNOWN\n");
+ break;
+ }
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 9: /* Minimum Cycle Time At Max CasLatancy */
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+
+ /* DDR2 addition of right of point */
+ if ((spdRawData[i] & 0x0f) == 0xA)
+ {
+ rightOfPoint = 25;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xB)
+ {
+ rightOfPoint = 33;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xC)
+ {
+ rightOfPoint = 66;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xD)
+ {
+ rightOfPoint = 75;
+ }
+ mvOsOutput("Minimum Cycle Time At Max CL: %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 10: /* Clock To Data Out */
+ div = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 10:100;
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / div;
+ rightOfPoint = time_tmp % div;
+ mvOsOutput("Clock To Data Out: %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 11: /* Error Check Type */
+ mvOsOutput("Error Check Type (0=NONE): %d\n",
+ dimmInfo.errorCheckType);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 12: /* Refresh Interval */
+ mvOsOutput("Refresh Rate: %x\n",
+ dimmInfo.refreshInterval);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 13: /* Sdram Width */
+ mvOsOutput("Sdram Width: %d bits\n",
+ dimmInfo.sdramWidth);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 14: /* Error Check Data Width */
+ mvOsOutput("Error Check Data Width: %d bits\n",
+ dimmInfo.errorCheckDataWidth);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 15: /* Minimum Clock Delay is unsupported */
+ if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) ||
+ (dimmInfo.memoryType == MEM_TYPE_DDR1))
+ {
+ mvOsOutput("Minimum Clk Delay back to back: %d\n",
+ spdRawData[i]);
+ }
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 16: /* Burst Length Supported */
+ /* SDRAM/DDR1:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 *
+ *********************************************************/
+ /* DDR2:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD *
+ *********************************************************/
+ mvOsOutput("Burst Length Supported: ");
+ if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) ||
+ (dimmInfo.memoryType == MEM_TYPE_DDR1))
+ {
+ if (dimmInfo.burstLengthSupported & BIT0)
+ mvOsOutput("1, ");
+ if (dimmInfo.burstLengthSupported & BIT1)
+ mvOsOutput("2, ");
+ }
+ if (dimmInfo.burstLengthSupported & BIT2)
+ mvOsOutput("4, ");
+ if (dimmInfo.burstLengthSupported & BIT3)
+ mvOsOutput("8, ");
+
+ mvOsOutput(" Bit \n");
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 17: /* Number Of Banks On Each Device */
+ mvOsOutput("Number Of Banks On Each Chip: %d\n",
+ dimmInfo.numOfBanksOnEachDevice);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 18: /* Suported Cas Latencies */
+
+ /* SDRAM:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 *
+ ********************************************************/
+
+ /* DDR 1:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 *
+ *********************************************************/
+
+ /* DDR 2:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD *
+ *********************************************************/
+
+ mvOsOutput("Suported Cas Latencies: (CL) ");
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ for (k = 0; k <=7; k++)
+ {
+ if (dimmInfo.suportedCasLatencies & (1 << k))
+ mvOsOutput("%d, ", k+1);
+ }
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+ {
+ if (dimmInfo.suportedCasLatencies & BIT0)
+ mvOsOutput("1, ");
+ if (dimmInfo.suportedCasLatencies & BIT1)
+ mvOsOutput("1.5, ");
+ if (dimmInfo.suportedCasLatencies & BIT2)
+ mvOsOutput("2, ");
+ if (dimmInfo.suportedCasLatencies & BIT3)
+ mvOsOutput("2.5, ");
+ if (dimmInfo.suportedCasLatencies & BIT4)
+ mvOsOutput("3, ");
+ if (dimmInfo.suportedCasLatencies & BIT5)
+ mvOsOutput("3.5, ");
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+ {
+ if (dimmInfo.suportedCasLatencies & BIT2)
+ mvOsOutput("2, ");
+ if (dimmInfo.suportedCasLatencies & BIT3)
+ mvOsOutput("3, ");
+ if (dimmInfo.suportedCasLatencies & BIT4)
+ mvOsOutput("4, ");
+ if (dimmInfo.suportedCasLatencies & BIT5)
+ mvOsOutput("5, ");
+ }
+ else
+ mvOsOutput("?.?, ");
+ mvOsOutput("\n");
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 20: /* DDR2 DIMM type info */
+ if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+ {
+ if (dimmInfo.dimmTypeInfo & (BIT0 | BIT4))
+ mvOsOutput("Registered DIMM (RDIMM)\n");
+ else if (dimmInfo.dimmTypeInfo & (BIT1 | BIT5))
+ mvOsOutput("Unbuffered DIMM (UDIMM)\n");
+ else
+ mvOsOutput("Unknown DIMM type.\n");
+ }
+
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 21: /* SDRAM Modules Attributes */
+ mvOsOutput("\nModule Attributes (SPD Byte 21): \n");
+
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ if (dimmInfo.dimmAttributes & BIT0)
+ mvOsOutput(" Buffered Addr/Control Input: Yes\n");
+ else
+ mvOsOutput(" Buffered Addr/Control Input: No\n");
+
+ if (dimmInfo.dimmAttributes & BIT1)
+ mvOsOutput(" Registered Addr/Control Input: Yes\n");
+ else
+ mvOsOutput(" Registered Addr/Control Input: No\n");
+
+ if (dimmInfo.dimmAttributes & BIT2)
+ mvOsOutput(" On-Card PLL (clock): Yes \n");
+ else
+ mvOsOutput(" On-Card PLL (clock): No \n");
+
+ if (dimmInfo.dimmAttributes & BIT3)
+ mvOsOutput(" Bufferd DQMB Input: Yes \n");
+ else
+ mvOsOutput(" Bufferd DQMB Inputs: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT4)
+ mvOsOutput(" Registered DQMB Inputs: Yes \n");
+ else
+ mvOsOutput(" Registered DQMB Inputs: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT5)
+ mvOsOutput(" Differential Clock Input: Yes \n");
+ else
+ mvOsOutput(" Differential Clock Input: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT6)
+ mvOsOutput(" redundant Row Addressing: Yes \n");
+ else
+ mvOsOutput(" redundant Row Addressing: No \n");
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+ {
+ if (dimmInfo.dimmAttributes & BIT0)
+ mvOsOutput(" Buffered Addr/Control Input: Yes\n");
+ else
+ mvOsOutput(" Buffered Addr/Control Input: No\n");
+
+ if (dimmInfo.dimmAttributes & BIT1)
+ mvOsOutput(" Registered Addr/Control Input: Yes\n");
+ else
+ mvOsOutput(" Registered Addr/Control Input: No\n");
+
+ if (dimmInfo.dimmAttributes & BIT2)
+ mvOsOutput(" On-Card PLL (clock): Yes \n");
+ else
+ mvOsOutput(" On-Card PLL (clock): No \n");
+
+ if (dimmInfo.dimmAttributes & BIT3)
+ mvOsOutput(" FET Switch On-Card Enabled: Yes \n");
+ else
+ mvOsOutput(" FET Switch On-Card Enabled: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT4)
+ mvOsOutput(" FET Switch External Enabled: Yes \n");
+ else
+ mvOsOutput(" FET Switch External Enabled: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT5)
+ mvOsOutput(" Differential Clock Input: Yes \n");
+ else
+ mvOsOutput(" Differential Clock Input: No \n");
+ }
+ else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+ {
+ mvOsOutput(" Number of Active Registers on the DIMM: %d\n",
+ (dimmInfo.dimmAttributes & 0x3) + 1);
+
+ mvOsOutput(" Number of PLLs on the DIMM: %d\n",
+ ((dimmInfo.dimmAttributes) >> 2) & 0x3);
+
+ if (dimmInfo.dimmAttributes & BIT4)
+ mvOsOutput(" FET Switch External Enabled: Yes \n");
+ else
+ mvOsOutput(" FET Switch External Enabled: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT6)
+ mvOsOutput(" Analysis probe installed: Yes \n");
+ else
+ mvOsOutput(" Analysis probe installed: No \n");
+ }
+
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 22: /* Suported AutoPreCharge */
+ mvOsOutput("\nModul Attributes (SPD Byte 22): \n");
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ if ( spdRawData[i] & BIT0 )
+ mvOsOutput(" Early Ras Precharge: Yes \n");
+ else
+ mvOsOutput(" Early Ras Precharge: No \n");
+
+ if ( spdRawData[i] & BIT1 )
+ mvOsOutput(" AutoPreCharge: Yes \n");
+ else
+ mvOsOutput(" AutoPreCharge: No \n");
+
+ if ( spdRawData[i] & BIT2 )
+ mvOsOutput(" Precharge All: Yes \n");
+ else
+ mvOsOutput(" Precharge All: No \n");
+
+ if ( spdRawData[i] & BIT3 )
+ mvOsOutput(" Write 1/ReadBurst: Yes \n");
+ else
+ mvOsOutput(" Write 1/ReadBurst: No \n");
+
+ if ( spdRawData[i] & BIT4 )
+ mvOsOutput(" lower VCC tolerance: 5%%\n");
+ else
+ mvOsOutput(" lower VCC tolerance: 10%%\n");
+
+ if ( spdRawData[i] & BIT5 )
+ mvOsOutput(" upper VCC tolerance: 5%%\n");
+ else
+ mvOsOutput(" upper VCC tolerance: 10%%\n");
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+ {
+ if ( spdRawData[i] & BIT0 )
+ mvOsOutput(" Supports Weak Driver: Yes \n");
+ else
+ mvOsOutput(" Supports Weak Driver: No \n");
+
+ if ( !(spdRawData[i] & BIT4) )
+ mvOsOutput(" lower VCC tolerance: 0.2V\n");
+
+ if ( !(spdRawData[i] & BIT5) )
+ mvOsOutput(" upper VCC tolerance: 0.2V\n");
+
+ if ( spdRawData[i] & BIT6 )
+ mvOsOutput(" Concurrent Auto Preharge: Yes \n");
+ else
+ mvOsOutput(" Concurrent Auto Preharge: No \n");
+
+ if ( spdRawData[i] & BIT7 )
+ mvOsOutput(" Supports Fast AP: Yes \n");
+ else
+ mvOsOutput(" Supports Fast AP: No \n");
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+ {
+ if ( spdRawData[i] & BIT0 )
+ mvOsOutput(" Supports Weak Driver: Yes \n");
+ else
+ mvOsOutput(" Supports Weak Driver: No \n");
+ }
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 23:
+ /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+
+ /* DDR2 addition of right of point */
+ if ((spdRawData[i] & 0x0f) == 0xA)
+ {
+ rightOfPoint = 25;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xB)
+ {
+ rightOfPoint = 33;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xC)
+ {
+ rightOfPoint = 66;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xD)
+ {
+ rightOfPoint = 75;
+ }
+
+ mvOsOutput("Minimum Cycle Time At 2nd highest CasLatancy"
+ "(0 = Not supported): %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint );
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/
+ div = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 10:100;
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / div;
+ rightOfPoint = time_tmp % div;
+ mvOsOutput("Clock To Data Out (2nd CL value): %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 25:
+ /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ leftOfPoint = (spdRawData[i] & 0xfc) >> 2;
+ rightOfPoint = (spdRawData[i] & 0x3) * 25;
+ }
+ else /* DDR1 or DDR2 */
+ {
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+
+ /* DDR2 addition of right of point */
+ if ((spdRawData[i] & 0x0f) == 0xA)
+ {
+ rightOfPoint = 25;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xB)
+ {
+ rightOfPoint = 33;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xC)
+ {
+ rightOfPoint = 66;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xD)
+ {
+ rightOfPoint = 75;
+ }
+ }
+ mvOsOutput("Minimum Cycle Time At 3rd highest CasLatancy"
+ "(0 = Not supported): %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint );
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ leftOfPoint = (spdRawData[i] & 0xfc) >> 2;
+ rightOfPoint = (spdRawData[i] & 0x3) * 25;
+ }
+ else /* DDR1 or DDR2 */
+ {
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = 0;
+ rightOfPoint = time_tmp;
+ }
+ mvOsOutput("Clock To Data Out (3rd CL value): %d.%2d[ns]\n",
+ leftOfPoint, rightOfPoint );
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 27: /* Minimum Row Precharge Time */
+ shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+ maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0xff : 0xfc;
+ maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0x00 : 0x03;
+ leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+ rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;
+ temp = ((leftOfPoint*100) + rightOfPoint);/* in 10ps Intervals*/
+ trp_clocks = (temp + (busClkPs-1)) / busClkPs;
+ mvOsOutput("Minimum Row Precharge Time [ns]: %d.%d = "
+ "in Clk cycles %d\n",
+ leftOfPoint, rightOfPoint, trp_clocks);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 28: /* Minimum Row Active to Row Active Time */
+ shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+ maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0xff : 0xfc;
+ maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0x00 : 0x03;
+ leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+ rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;
+ temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/
+ trrd_clocks = (temp + (busClkPs-1)) / busClkPs;
+ mvOsOutput("Minimum Row Active -To- Row Active Delay [ns]: "
+ "%d.%d = in Clk cycles %d\n",
+ leftOfPoint, rightOfPoint, trp_clocks);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 29: /* Minimum Ras-To-Cas Delay */
+ shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+ maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0xff : 0xfc;
+ maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0x00 : 0x03;
+ leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+ rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;
+ temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/
+ trcd_clocks = (temp + (busClkPs-1) )/ busClkPs;
+ mvOsOutput("Minimum Ras-To-Cas Delay [ns]: %d.%d = "
+ "in Clk cycles %d\n",
+ leftOfPoint, rightOfPoint, trp_clocks);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 30: /* Minimum Ras Pulse Width */
+ tras_clocks = (cas2ps(spdRawData[i])+(busClkPs-1)) / busClkPs;
+ mvOsOutput("Minimum Ras Pulse Width [ns]: %d = "
+ "in Clk cycles %d\n", spdRawData[i], tras_clocks);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 31: /* Module Bank Density */
+ mvOsOutput("Module Bank Density (more than 1= Multisize-Module):");
+
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ if (dimmInfo.dimmBankDensity & BIT0)
+ mvOsOutput("1GB, ");
+ if (dimmInfo.dimmBankDensity & BIT1)
+ mvOsOutput("8MB, ");
+ if (dimmInfo.dimmBankDensity & BIT2)
+ mvOsOutput("16MB, ");
+ if (dimmInfo.dimmBankDensity & BIT3)
+ mvOsOutput("32MB, ");
+ if (dimmInfo.dimmBankDensity & BIT4)
+ mvOsOutput("64MB, ");
+ if (dimmInfo.dimmBankDensity & BIT5)
+ mvOsOutput("128MB, ");
+ if (dimmInfo.dimmBankDensity & BIT6)
+ mvOsOutput("256MB, ");
+ if (dimmInfo.dimmBankDensity & BIT7)
+ mvOsOutput("512MB, ");
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+ {
+ if (dimmInfo.dimmBankDensity & BIT0)
+ mvOsOutput("1GB, ");
+ if (dimmInfo.dimmBankDensity & BIT1)
+ mvOsOutput("2GB, ");
+ if (dimmInfo.dimmBankDensity & BIT2)
+ mvOsOutput("16MB, ");
+ if (dimmInfo.dimmBankDensity & BIT3)
+ mvOsOutput("32MB, ");
+ if (dimmInfo.dimmBankDensity & BIT4)
+ mvOsOutput("64MB, ");
+ if (dimmInfo.dimmBankDensity & BIT5)
+ mvOsOutput("128MB, ");
+ if (dimmInfo.dimmBankDensity & BIT6)
+ mvOsOutput("256MB, ");
+ if (dimmInfo.dimmBankDensity & BIT7)
+ mvOsOutput("512MB, ");
+ }
+ else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+ {
+ if (dimmInfo.dimmBankDensity & BIT0)
+ mvOsOutput("1GB, ");
+ if (dimmInfo.dimmBankDensity & BIT1)
+ mvOsOutput("2GB, ");
+ if (dimmInfo.dimmBankDensity & BIT2)
+ mvOsOutput("4GB, ");
+ if (dimmInfo.dimmBankDensity & BIT3)
+ mvOsOutput("8GB, ");
+ if (dimmInfo.dimmBankDensity & BIT4)
+ mvOsOutput("16GB, ");
+ if (dimmInfo.dimmBankDensity & BIT5)
+ mvOsOutput("128MB, ");
+ if (dimmInfo.dimmBankDensity & BIT6)
+ mvOsOutput("256MB, ");
+ if (dimmInfo.dimmBankDensity & BIT7)
+ mvOsOutput("512MB, ");
+ }
+ mvOsOutput("\n");
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 32: /* Address And Command Setup Time (measured in ns/1000) */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ rightOfPoint = (spdRawData[i] & 0x0f);
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ if(leftOfPoint > 7)
+ {
+ leftOfPoint *= -1;
+ }
+ }
+ else /* DDR1 or DDR2 */
+ {
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ }
+ mvOsOutput("Address And Command Setup Time [ns]: %d.%d\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 33: /* Address And Command Hold Time */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ rightOfPoint = (spdRawData[i] & 0x0f);
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ if(leftOfPoint > 7)
+ {
+ leftOfPoint *= -1;
+ }
+ }
+ else /* DDR1 or DDR2 */
+ {
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ }
+ mvOsOutput("Address And Command Hold Time [ns]: %d.%d\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 34: /* Data Input Setup Time */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ rightOfPoint = (spdRawData[i] & 0x0f);
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ if(leftOfPoint > 7)
+ {
+ leftOfPoint *= -1;
+ }
+ }
+ else /* DDR1 or DDR2 */
+ {
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ }
+ mvOsOutput("Data Input Setup Time [ns]: %d.%d\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 35: /* Data Input Hold Time */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ rightOfPoint = (spdRawData[i] & 0x0f);
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ if(leftOfPoint > 7)
+ {
+ leftOfPoint *= -1;
+ }
+ }
+ else /* DDR1 or DDR2 */
+ {
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ }
+ mvOsOutput("Data Input Hold Time [ns]: %d.%d\n\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 36: /* Relevant for DDR2 only: Write Recovery Time */
+ leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> 2);
+ rightOfPoint = (spdRawData[i] & maskRightOfPoint) * 25;
+ mvOsOutput("Write Recovery Time [ns]: %d.%d\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+ }
+
+}
+
+
+/*
+ * translate ns.ns/10 coding of SPD timing values
+ * into ps unit values
+ */
+/*******************************************************************************
+* cas2ps - Translate x.y ns parameter to pico-seconds values
+*
+* DESCRIPTION:
+* This function translates x.y nano seconds to its value in pico seconds.
+* For example 3.75ns will return 3750.
+*
+* INPUT:
+* spd_byte - DIMM SPD byte.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* value in pico seconds.
+*
+*******************************************************************************/
+static MV_U32 cas2ps(MV_U8 spd_byte)
+{
+ MV_U32 ns, ns10;
+
+ /* isolate upper nibble */
+ ns = (spd_byte >> 4) & 0x0F;
+ /* isolate lower nibble */
+ ns10 = (spd_byte & 0x0F);
+
+ if( ns10 < 10 ) {
+ ns10 *= 10;
+ }
+ else if( ns10 == 10 )
+ ns10 = 25;
+ else if( ns10 == 11 )
+ ns10 = 33;
+ else if( ns10 == 12 )
+ ns10 = 66;
+ else if( ns10 == 13 )
+ ns10 = 75;
+ else
+ {
+ mvOsOutput("cas2ps Err. unsupported cycle time.\n");
+ }
+
+ return (ns*1000 + ns10*10);
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDram
+#define __INCmvDram
+
+#include "ddr1_2/mvDramIf.h"
+#include "twsi/mvTwsi.h"
+
+#define MAX_DIMM_NUM 2
+#define SPD_SIZE 128
+
+/* Dimm spd offsets */
+#define DIMM_MEM_TYPE 2
+#define DIMM_ROW_NUM 3
+#define DIMM_COL_NUM 4
+#define DIMM_MODULE_BANK_NUM 5
+#define DIMM_DATA_WIDTH 6
+#define DIMM_VOLT_IF 8
+#define DIMM_MIN_CC_AT_MAX_CAS 9
+#define DIMM_ERR_CHECK_TYPE 11
+#define DIMM_REFRESH_INTERVAL 12
+#define DIMM_SDRAM_WIDTH 13
+#define DIMM_ERR_CHECK_DATA_WIDTH 14
+#define DIMM_MIN_CLK_DEL 15
+#define DIMM_BURST_LEN_SUP 16
+#define DIMM_DEV_BANK_NUM 17
+#define DIMM_SUP_CAL 18
+#define DIMM_DDR2_TYPE_INFORMATION 20 /* DDR2 only */
+#define DIMM_BUF_ADDR_CONT_IN 21
+#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1 23
+#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2 25
+#define DIMM_MIN_ROW_PRECHARGE_TIME 27
+#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE 28
+#define DIMM_MIN_RAS_TO_CAS_DELAY 29
+#define DIMM_MIN_RAS_PULSE_WIDTH 30
+#define DIMM_BANK_DENSITY 31
+#define DIMM_MIN_WRITE_RECOVERY_TIME 36
+#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY 37
+#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY 38
+#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD 42
+
+/* Dimm Memory Type values */
+#define DIMM_MEM_TYPE_SDRAM 0x4
+#define DIMM_MEM_TYPE_DDR1 0x7
+#define DIMM_MEM_TYPE_DDR2 0x8
+
+#define DIMM_MODULE_MANU_OFFS 64
+#define DIMM_MODULE_MANU_SIZE 8
+#define DIMM_MODULE_VEN_OFFS 73
+#define DIMM_MODULE_VEN_SIZE 25
+#define DIMM_MODULE_ID_OFFS 99
+#define DIMM_MODULE_ID_SIZE 18
+
+/* enumeration for voltage levels. */
+typedef enum _mvDimmVoltageIf
+{
+ TTL_5V_TOLERANT,
+ LVTTL,
+ HSTL_1_5V,
+ SSTL_3_3V,
+ SSTL_2_5V,
+ VOLTAGE_UNKNOWN,
+} MV_DIMM_VOLTAGE_IF;
+
+
+/* enumaration for SDRAM CAS Latencies. */
+typedef enum _mvDimmSdramCas
+{
+ SD_CL_1 =1,
+ SD_CL_2,
+ SD_CL_3,
+ SD_CL_4,
+ SD_CL_5,
+ SD_CL_6,
+ SD_CL_7,
+ SD_FAULT
+}MV_DIMM_SDRAM_CAS;
+
+
+/* DIMM information structure */
+typedef struct _mvDimmInfo
+{
+ MV_MEMORY_TYPE memoryType; /* DDR or SDRAM */
+
+ MV_U8 spdRawData[SPD_SIZE]; /* Content of SPD-EEPROM copied 1:1 */
+
+ /* DIMM dimensions */
+ MV_U32 numOfRowAddr;
+ MV_U32 numOfColAddr;
+ MV_U32 numOfModuleBanks;
+ MV_U32 dataWidth;
+ MV_U32 errorCheckType; /* ECC , PARITY..*/
+ MV_U32 sdramWidth; /* 4,8,16 or 32 */
+ MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */
+ MV_U32 burstLengthSupported;
+ MV_U32 numOfBanksOnEachDevice;
+ MV_U32 suportedCasLatencies;
+ MV_U32 refreshInterval;
+ MV_U32 dimmBankDensity;
+ MV_U32 dimmTypeInfo; /* DDR2 only */
+ MV_U32 dimmAttributes;
+
+ /* DIMM timing parameters */
+ MV_U32 minCycleTimeAtMaxCasLatPs;
+ MV_U32 minCycleTimeAtMaxCasLatMinus1Ps;
+ MV_U32 minCycleTimeAtMaxCasLatMinus2Ps;
+ MV_U32 minRowPrechargeTime;
+ MV_U32 minRowActiveToRowActive;
+ MV_U32 minRasToCasDelay;
+ MV_U32 minRasPulseWidth;
+ MV_U32 minWriteRecoveryTime; /* DDR2 only */
+ MV_U32 minWriteToReadCmdDelay; /* DDR2 only */
+ MV_U32 minReadToPrechCmdDelay; /* DDR2 only */
+ MV_U32 minRefreshToActiveCmd; /* DDR2 only */
+
+ /* Parameters calculated from the extracted DIMM information */
+ MV_U32 size; /* 16,64,128,256 or 512 MByte in MB units */
+ MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit in MB units */
+ MV_U32 numberOfDevices;
+
+} MV_DIMM_INFO;
+
+
+MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo);
+MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo);
+MV_VOID dimmSpdPrint(MV_U32 dimmNum);
+MV_STATUS dimmSpdCpy(MV_VOID);
+
+#endif /* __INCmvDram */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#include "ddr1_2/mvDramIf.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+
+
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+/* DRAM bank presence encoding */
+#define BANK_PRESENT_CS0 0x1
+#define BANK_PRESENT_CS0_CS1 0x3
+#define BANK_PRESENT_CS0_CS2 0x5
+#define BANK_PRESENT_CS0_CS1_CS2 0x7
+#define BANK_PRESENT_CS0_CS2_CS3 0xd
+#define BANK_PRESENT_CS0_CS2_CS3_CS4 0xf
+
+/* locals */
+static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin);
+#if defined(MV_INC_BOARD_DDIM)
+static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas);
+static MV_U32 sdramModeRegCalc(MV_U32 minCas);
+static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk);
+static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk,
+ MV_U32 forcedCl);
+static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo,
+ MV_U32 minCas, MV_U32 busClk);
+static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo,
+ MV_U32 busClk);
+
+/*******************************************************************************
+* mvDramIfDetect - Prepare DRAM interface configuration values.
+*
+* DESCRIPTION:
+* This function implements the full DRAM detection and timing
+* configuration for best system performance.
+* Since this routine runs from a ROM device (Boot Flash), its stack
+* resides on RAM, that might be the system DRAM. Changing DRAM
+* configuration values while keeping vital data in DRAM is risky. That
+* is why the function does not preform the configuration setting but
+* prepare those in predefined 32bit registers (in this case IDMA
+* registers are used) for other routine to perform the settings.
+* The function will call for board DRAM SPD information for each DRAM
+* chip select. The function will then analyze those SPD parameters of
+* all DRAM banks in order to decide on DRAM configuration compatible
+* for all DRAM banks.
+* The function will set the CPU DRAM address decode registers.
+* Note: This routine prepares values that will overide configuration of
+* mvDramBasicAsmInit().
+*
+* INPUT:
+* forcedCl - Forced CAL Latency. If equal to zero, do not force.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvDramIfDetect(MV_U32 forcedCl)
+{
+ MV_U32 retVal = MV_OK; /* return value */
+ MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS];
+ MV_U32 busClk, size, base = 0, i, temp, deviceW, dimmW;
+ MV_U8 minCas;
+ MV_DRAM_DEC_WIN dramDecWin;
+
+ dramDecWin.addrWin.baseHigh = 0;
+
+ busClk = mvBoardSysClkGet();
+
+ if (0 == busClk)
+ {
+ mvOsPrintf("Dram: ERR. Can't detect system clock! \n");
+ return MV_ERROR;
+ }
+
+ /* Close DRAM banks except bank 0 (in case code is excecuting from it...) */
+#if defined(MV_INCLUDE_SDRAM_CS1)
+ for(i= SDRAM_CS1; i < MV_DRAM_MAX_CS; i++)
+ mvCpuIfTargetWinEnable(i, MV_FALSE);
+#endif
+
+ /* we will use bank 0 as the representative of the all the DRAM banks, */
+ /* since bank 0 must exist. */
+ for(i = 0; i < MV_DRAM_MAX_CS; i++)
+ {
+ /* if Bank exist */
+ if(MV_OK == mvDramBankInfoGet(i, &bankInfo[i]))
+ {
+ /* check it isn't SDRAM */
+ if(bankInfo[i].memoryType == MEM_TYPE_SDRAM)
+ {
+ mvOsPrintf("Dram: ERR. SDRAM type not supported !!!\n");
+ return MV_ERROR;
+ }
+ /* All banks must support registry in order to activate it */
+ if(bankInfo[i].registeredAddrAndControlInputs !=
+ bankInfo[0].registeredAddrAndControlInputs)
+ {
+ mvOsPrintf("Dram: ERR. different Registered settings !!!\n");
+ return MV_ERROR;
+ }
+
+ /* Init the CPU window decode */
+ /* Note that the size in Bank info is in MB units */
+ /* Note that the Dimm width might be different then the device DRAM width */
+ temp = MV_REG_READ(SDRAM_CONFIG_REG);
+
+ deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_16BIT )? 16 : 32;
+ dimmW = bankInfo[0].dataWidth - (bankInfo[0].dataWidth % 16);
+ size = ((bankInfo[i].size << 20) / (dimmW/deviceW));
+
+ /* We can not change DRAM window settings while excecuting */
+ /* code from it. That is why we skip the DRAM CS[0], saving */
+ /* it to the ROM configuration routine */
+ if(i == SDRAM_CS0)
+ {
+ MV_U32 sizeToReg;
+
+ /* Translate the given window size to register format */
+ sizeToReg = ctrlSizeToReg(size, SCSR_SIZE_ALIGNMENT);
+
+ /* Size parameter validity check. */
+ if (-1 == sizeToReg)
+ {
+ mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n"
+ ,i);
+ return MV_BAD_PARAM;
+ }
+
+ /* Size is located at upper 16 bits */
+ sizeToReg <<= SCSR_SIZE_OFFS;
+
+ /* enable it */
+ sizeToReg |= SCSR_WIN_EN;
+
+ MV_REG_WRITE(DRAM_BUF_REG0, sizeToReg);
+ }
+ else
+ {
+ dramDecWin.addrWin.baseLow = base;
+ dramDecWin.addrWin.size = size;
+ dramDecWin.enable = MV_TRUE;
+
+ if (MV_OK != mvDramIfWinSet(SDRAM_CS0 + i, &dramDecWin))
+ {
+ mvOsPrintf("Dram: ERR. Fail to set bank %d!!!\n",
+ SDRAM_CS0 + i);
+ return MV_ERROR;
+ }
+ }
+
+ base += size;
+
+ /* update the suportedCasLatencies mask */
+ bankInfo[0].suportedCasLatencies &= bankInfo[i].suportedCasLatencies;
+
+ }
+ else
+ {
+ if( i == 0 ) /* bank 0 doesn't exist */
+ {
+ mvOsPrintf("Dram: ERR. Fail to detect bank 0 !!!\n");
+ return MV_ERROR;
+ }
+ else
+ {
+ DB(mvOsPrintf("Dram: Could not find bank %d\n", i));
+ bankInfo[i].size = 0; /* Mark this bank as non exist */
+ }
+ }
+ }
+
+ /* calculate minimum CAS */
+ minCas = minCasCalc(&bankInfo[0], busClk, forcedCl);
+ if (0 == minCas)
+ {
+ mvOsOutput("Dram: Warn: Could not find CAS compatible to SysClk %dMhz\n",
+ (busClk / 1000000));
+
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+ {
+ minCas = DDR2_CL_4; /* Continue with this CAS */
+ mvOsPrintf("Set default CAS latency 4\n");
+ }
+ else
+ {
+ minCas = DDR1_CL_3; /* Continue with this CAS */
+ mvOsPrintf("Set default CAS latency 3\n");
+ }
+ }
+
+ /* calc SDRAM_CONFIG_REG and save it to temp register */
+ temp = sdramConfigRegCalc(&bankInfo[0], busClk);
+ if(-1 == temp)
+ {
+ mvOsPrintf("Dram: ERR. sdramConfigRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ MV_REG_WRITE(DRAM_BUF_REG1, temp);
+
+ /* calc SDRAM_MODE_REG and save it to temp register */
+ temp = sdramModeRegCalc(minCas);
+ if(-1 == temp)
+ {
+ mvOsPrintf("Dram: ERR. sdramModeRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ MV_REG_WRITE(DRAM_BUF_REG2, temp);
+
+ /* calc SDRAM_EXTENDED_MODE_REG and save it to temp register */
+ temp = sdramExtModeRegCalc(&bankInfo[0]);
+ if(-1 == temp)
+ {
+ mvOsPrintf("Dram: ERR. sdramModeRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ MV_REG_WRITE(DRAM_BUF_REG10, temp);
+
+ /* calc D_UNIT_CONTROL_LOW and save it to temp register */
+ temp = dunitCtrlLowRegCalc(&bankInfo[0], minCas);
+ if(-1 == temp)
+ {
+ mvOsPrintf("Dram: ERR. dunitCtrlLowRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ MV_REG_WRITE(DRAM_BUF_REG3, temp);
+
+ /* calc SDRAM_ADDR_CTRL_REG and save it to temp register */
+ temp = sdramAddrCtrlRegCalc(&bankInfo[0]);
+ if(-1 == temp)
+ {
+ mvOsPrintf("Dram: ERR. sdramAddrCtrlRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ MV_REG_WRITE(DRAM_BUF_REG4, temp);
+
+ /* calc SDRAM_TIMING_CTRL_LOW_REG and save it to temp register */
+ temp = sdramTimeCtrlLowRegCalc(&bankInfo[0], minCas, busClk);
+ if(-1 == temp)
+ {
+ mvOsPrintf("Dram: ERR. sdramTimeCtrlLowRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ MV_REG_WRITE(DRAM_BUF_REG5, temp);
+
+ /* calc SDRAM_TIMING_CTRL_HIGH_REG and save it to temp register */
+ temp = sdramTimeCtrlHighRegCalc(&bankInfo[0], busClk);
+ if(-1 == temp)
+ {
+ mvOsPrintf("Dram: ERR. sdramTimeCtrlHighRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ MV_REG_WRITE(DRAM_BUF_REG6, temp);
+
+ /* Config DDR2 On Die Termination (ODT) registers */
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+ {
+ sdramDDr2OdtConfig(bankInfo);
+ }
+
+ /* Note that DDR SDRAM Address/Control and Data pad calibration */
+ /* settings is done in mvSdramIfConfig.s */
+
+ return retVal;
+}
+
+/*******************************************************************************
+* minCasCalc - Calculate the Minimum CAS latency which can be used.
+*
+* DESCRIPTION:
+* Calculate the minimum CAS latency that can be used, base on the DRAM
+* parameters and the SDRAM bus Clock freq.
+*
+* INPUT:
+* busClk - the DRAM bus Clock.
+* pBankInfo - bank info parameters.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* The minimum CAS Latency. The function returns 0 if max CAS latency
+* supported by banks is incompatible with system bus clock frequancy.
+*
+*******************************************************************************/
+static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk,
+ MV_U32 forcedCl)
+{
+ MV_U32 count = 1, j;
+ MV_U32 busClkPs = 1000000000 / (busClk / 1000); /* in ps units */
+ MV_U32 startBit, stopBit;
+
+ /* DDR 1:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 *
+ *********************************************************/
+
+ /* DDR 2:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD *
+ *********************************************************/
+
+
+ /* If we are asked to use the forced CAL */
+ if (forcedCl)
+ {
+ mvOsPrintf("DRAM: Using forced CL %d.%d\n", (forcedCl / 10),
+ (forcedCl % 10));
+
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+ {
+ if (forcedCl == 30)
+ pBankInfo->suportedCasLatencies = 0x08;
+ else if (forcedCl == 40)
+ pBankInfo->suportedCasLatencies = 0x10;
+ else
+ {
+ mvOsPrintf("Forced CL %d.%d not supported. Set default CL 4\n",
+ (forcedCl / 10), (forcedCl % 10));
+ pBankInfo->suportedCasLatencies = 0x10;
+ }
+ }
+ else
+ {
+ if (forcedCl == 15)
+ pBankInfo->suportedCasLatencies = 0x02;
+ else if (forcedCl == 20)
+ pBankInfo->suportedCasLatencies = 0x04;
+ else if (forcedCl == 25)
+ pBankInfo->suportedCasLatencies = 0x08;
+ else if (forcedCl == 30)
+ pBankInfo->suportedCasLatencies = 0x10;
+ else if (forcedCl == 40)
+ pBankInfo->suportedCasLatencies = 0x40;
+ else
+ {
+ mvOsPrintf("Forced CL %d.%d not supported. Set default CL 3\n",
+ (forcedCl / 10), (forcedCl % 10));
+ pBankInfo->suportedCasLatencies = 0x10;
+ }
+ }
+
+ return pBankInfo->suportedCasLatencies;
+ }
+
+ /* go over the supported cas mask from Max Cas down and check if the */
+ /* SysClk stands in its time requirments. */
+
+
+ DB(mvOsPrintf("Dram: minCasCalc supported mask = %x busClkPs = %x \n",
+ pBankInfo->suportedCasLatencies,busClkPs ));
+ for(j = 7; j > 0; j--)
+ {
+ if((pBankInfo->suportedCasLatencies >> j) & BIT0 )
+ {
+ /* Reset the bits for CL incompatible for the sysClk */
+ switch (count)
+ {
+ case 1:
+ if (pBankInfo->minCycleTimeAtMaxCasLatPs > busClkPs)
+ pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+ count++;
+ break;
+ case 2:
+ if (pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs)
+ pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+ count++;
+ break;
+ case 3:
+ if (pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs)
+ pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+ count++;
+ break;
+ default:
+ pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+ break;
+ }
+ }
+ }
+
+ DB(mvOsPrintf("Dram: minCasCalc support = %x (after SysCC calc)\n",
+ pBankInfo->suportedCasLatencies ));
+
+ /* SDRAM DDR1 controller supports CL 1.5 to 3.5 */
+ /* SDRAM DDR2 controller supports CL 3 to 5 */
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+ {
+ startBit = 3; /* DDR2 support CL start with CL3 (bit 3) */
+ stopBit = 5; /* DDR2 support CL stops with CL5 (bit 5) */
+ }
+ else
+ {
+ startBit = 1; /* DDR1 support CL start with CL1.5 (bit 3) */
+ stopBit = 4; /* DDR1 support CL stops with CL3 (bit 4) */
+ }
+
+ for(j = startBit; j <= stopBit ; j++)
+ {
+ if((pBankInfo->suportedCasLatencies >> j) & BIT0 )
+ {
+ DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j)));
+ return (BIT0 << j);
+ }
+ }
+
+ return 0;
+}
+
+/*******************************************************************************
+* sdramConfigRegCalc - Calculate sdram config register
+*
+* DESCRIPTION: Calculate sdram config register optimized value based
+* on the bank info parameters.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram config reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk)
+{
+ MV_U32 sdramConfig = 0;
+ MV_U32 refreshPeriod;
+
+ busClk /= 1000000; /* we work with busClk in MHz */
+
+ sdramConfig = MV_REG_READ(SDRAM_CONFIG_REG);
+
+ /* figure out the memory refresh internal */
+ switch (pBankInfo->refreshInterval & 0xf)
+ {
+ case 0x0: /* refresh period is 15.625 usec */
+ refreshPeriod = 15625;
+ break;
+ case 0x1: /* refresh period is 3.9 usec */
+ refreshPeriod = 3900;
+ break;
+ case 0x2: /* refresh period is 7.8 usec */
+ refreshPeriod = 7800;
+ break;
+ case 0x3: /* refresh period is 31.3 usec */
+ refreshPeriod = 31300;
+ break;
+ case 0x4: /* refresh period is 62.5 usec */
+ refreshPeriod = 62500;
+ break;
+ case 0x5: /* refresh period is 125 usec */
+ refreshPeriod = 125000;
+ break;
+ default: /* refresh period undefined */
+ mvOsPrintf("Dram: ERR. DRAM refresh period is unknown!\n");
+ return -1;
+ }
+
+ /* Now the refreshPeriod is in register format value */
+ refreshPeriod = (busClk * refreshPeriod) / 1000;
+
+ DB(mvOsPrintf("Dram: sdramConfigRegCalc calculated refresh interval %0x\n",
+ refreshPeriod));
+
+ /* make sure the refresh value is only 14 bits */
+ if(refreshPeriod > SDRAM_REFRESH_MAX)
+ {
+ refreshPeriod = SDRAM_REFRESH_MAX;
+ DB(mvOsPrintf("Dram: sdramConfigRegCalc adjusted refresh interval %0x\n",
+ refreshPeriod));
+ }
+
+ /* Clear the refresh field */
+ sdramConfig &= ~SDRAM_REFRESH_MASK;
+
+ /* Set new value to refresh field */
+ sdramConfig |= (refreshPeriod & SDRAM_REFRESH_MASK);
+
+ /* registered DRAM ? */
+ if ( pBankInfo->registeredAddrAndControlInputs )
+ {
+ /* it's registered DRAM, so set the reg. DRAM bit */
+ sdramConfig |= SDRAM_REGISTERED;
+ mvOsPrintf("DRAM Attribute: Registered address and control inputs.\n");
+ }
+
+ /* set DDR SDRAM devices configuration */
+ sdramConfig &= ~SDRAM_DCFG_MASK; /* Clear Dcfg field */
+
+ switch (pBankInfo->sdramWidth)
+ {
+ case 8: /* memory is x8 */
+ sdramConfig |= SDRAM_DCFG_X8_DEV;
+ DB(mvOsPrintf("Dram: sdramConfigRegCalc SDRAM device width x8\n"));
+ break;
+ case 16:
+ sdramConfig |= SDRAM_DCFG_X16_DEV;
+ DB(mvOsPrintf("Dram: sdramConfigRegCalc SDRAM device width x16\n"));
+ break;
+ default: /* memory width unsupported */
+ mvOsPrintf("Dram: ERR. DRAM chip width is unknown!\n");
+ return -1;
+ }
+
+ /* Set static default settings */
+ sdramConfig |= SDRAM_CONFIG_DV;
+
+ DB(mvOsPrintf("Dram: sdramConfigRegCalc set sdramConfig to 0x%x\n",
+ sdramConfig));
+
+ return sdramConfig;
+}
+
+/*******************************************************************************
+* sdramModeRegCalc - Calculate sdram mode register
+*
+* DESCRIPTION: Calculate sdram mode register optimized value based
+* on the bank info parameters and the minCas.
+*
+* INPUT:
+* minCas - minimum CAS supported.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram mode reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramModeRegCalc(MV_U32 minCas)
+{
+ MV_U32 sdramMode;
+
+ sdramMode = MV_REG_READ(SDRAM_MODE_REG);
+
+ /* Clear CAS Latency field */
+ sdramMode &= ~SDRAM_CL_MASK;
+
+ mvOsPrintf("DRAM CAS Latency ");
+
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+ {
+ switch (minCas)
+ {
+ case DDR2_CL_3:
+ sdramMode |= SDRAM_DDR2_CL_3;
+ mvOsPrintf("3.\n");
+ break;
+ case DDR2_CL_4:
+ sdramMode |= SDRAM_DDR2_CL_4;
+ mvOsPrintf("4.\n");
+ break;
+ case DDR2_CL_5:
+ sdramMode |= SDRAM_DDR2_CL_5;
+ mvOsPrintf("5.\n");
+ break;
+ default:
+ mvOsPrintf("\nsdramModeRegCalc ERROR: Max. CL out of range\n");
+ return -1;
+ }
+ sdramMode |= DDR2_MODE_REG_DV;
+ }
+ else /* DDR1 */
+ {
+ switch (minCas)
+ {
+ case DDR1_CL_1_5:
+ sdramMode |= SDRAM_DDR1_CL_1_5;
+ mvOsPrintf("1.5\n");
+ break;
+ case DDR1_CL_2:
+ sdramMode |= SDRAM_DDR1_CL_2;
+ mvOsPrintf("2\n");
+ break;
+ case DDR1_CL_2_5:
+ sdramMode |= SDRAM_DDR1_CL_2_5;
+ mvOsPrintf("2.5\n");
+ break;
+ case DDR1_CL_3:
+ sdramMode |= SDRAM_DDR1_CL_3;
+ mvOsPrintf("3\n");
+ break;
+ case DDR1_CL_4:
+ sdramMode |= SDRAM_DDR1_CL_4;
+ mvOsPrintf("4\n");
+ break;
+ default:
+ mvOsPrintf("\nsdramModeRegCalc ERROR: Max. CL out of range\n");
+ return -1;
+ }
+ sdramMode |= DDR1_MODE_REG_DV;
+ }
+
+ DB(mvOsPrintf("nsdramModeRegCalc register 0x%x\n", sdramMode ));
+
+ return sdramMode;
+}
+
+/*******************************************************************************
+* sdramExtModeRegCalc - Calculate sdram Extended mode register
+*
+* DESCRIPTION:
+* Return sdram Extended mode register value based
+* on the bank info parameters and bank presence.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram Extended mode reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo)
+{
+ MV_U32 populateBanks = 0;
+ int bankNum;
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+ {
+ /* Represent the populate banks in binary form */
+ for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ if (0 != pBankInfo[bankNum].size)
+ {
+ populateBanks |= (1 << bankNum);
+ }
+ }
+
+ switch(populateBanks)
+ {
+ case(BANK_PRESENT_CS0):
+ return DDR_SDRAM_EXT_MODE_CS0_DV;
+
+ case(BANK_PRESENT_CS0_CS1):
+ return DDR_SDRAM_EXT_MODE_CS0_DV;
+
+ case(BANK_PRESENT_CS0_CS2):
+ return DDR_SDRAM_EXT_MODE_CS0_CS2_DV;
+
+ case(BANK_PRESENT_CS0_CS1_CS2):
+ return DDR_SDRAM_EXT_MODE_CS0_CS2_DV;
+
+ case(BANK_PRESENT_CS0_CS2_CS3):
+ return DDR_SDRAM_EXT_MODE_CS0_CS2_DV;
+
+ case(BANK_PRESENT_CS0_CS2_CS3_CS4):
+ return DDR_SDRAM_EXT_MODE_CS0_CS2_DV;
+
+ default:
+ mvOsPrintf("sdramExtModeRegCalc: Invalid DRAM bank presence\n");
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/*******************************************************************************
+* dunitCtrlLowRegCalc - Calculate sdram dunit control low register
+*
+* DESCRIPTION: Calculate sdram dunit control low register optimized value based
+* on the bank info parameters and the minCas.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+* minCas - minimum CAS supported.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram dunit control low reg value.
+*
+*******************************************************************************/
+static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas)
+{
+ MV_U32 dunitCtrlLow;
+
+ dunitCtrlLow = MV_REG_READ(SDRAM_DUNIT_CTRL_REG);
+
+ /* Clear StBurstDel field */
+ dunitCtrlLow &= ~SDRAM_ST_BURST_DEL_MASK;
+
+#ifdef MV_88W8660
+ /* Clear address/control output timing field */
+ dunitCtrlLow &= ~SDRAM_CTRL_POS_RISE;
+#endif /* MV_88W8660 */
+
+ DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc\n"));
+
+ /* For proper sample of read data set the Dunit Control register's */
+ /* stBurstDel bits [27:24] */
+ /********-********-********-********-********-*********
+ * CL=1.5 | CL=2 | CL=2.5 | CL=3 | CL=4 | CL=5 *
+ *********-********-********-********-********-*********
+Not Reg. * 0011 | 0011 | 0100 | 0100 | 0101 | TBD *
+ *********-********-********-********-********-*********
+Registered * 0100 | 0100 | 0101 | 0101 | 0110 | TBD *
+ *********-********-********-********-********-*********/
+
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+ {
+ switch (minCas)
+ {
+ case DDR2_CL_3:
+ /* registerd DDR SDRAM? */
+ if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+ dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS;
+ else
+ dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS;
+ break;
+ case DDR2_CL_4:
+ /* registerd DDR SDRAM? */
+ if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+ dunitCtrlLow |= 0x6 << SDRAM_ST_BURST_DEL_OFFS;
+ else
+ dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS;
+ break;
+ default:
+ mvOsPrintf("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n",
+ minCas);
+ return -1;
+ }
+ }
+ else /* DDR1 */
+ {
+ switch (minCas)
+ {
+ case DDR1_CL_1_5:
+ /* registerd DDR SDRAM? */
+ if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+ dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS;
+ else
+ dunitCtrlLow |= 0x3 << SDRAM_ST_BURST_DEL_OFFS;
+ break;
+ case DDR1_CL_2:
+ /* registerd DDR SDRAM? */
+ if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+ dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS;
+ else
+ dunitCtrlLow |= 0x3 << SDRAM_ST_BURST_DEL_OFFS;
+ break;
+ case DDR1_CL_2_5:
+ /* registerd DDR SDRAM? */
+ if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+ dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS;
+ else
+ dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS;
+ break;
+ case DDR1_CL_3:
+ /* registerd DDR SDRAM? */
+ if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+ dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS;
+ else
+ dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS;
+ break;
+ case DDR1_CL_4:
+ /* registerd DDR SDRAM? */
+ if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+ dunitCtrlLow |= 0x6 << SDRAM_ST_BURST_DEL_OFFS;
+ else
+ dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS;
+ break;
+ default:
+ mvOsPrintf("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n",
+ minCas);
+ return -1;
+ }
+
+ }
+ DB(mvOsPrintf("Dram: Reg dunit control low = %x\n", dunitCtrlLow ));
+
+ return dunitCtrlLow;
+}
+
+/*******************************************************************************
+* sdramAddrCtrlRegCalc - Calculate sdram address control register
+*
+* DESCRIPTION: Calculate sdram address control register optimized value based
+* on the bank info parameters and the minCas.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram address control reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo)
+{
+ MV_U32 addrCtrl = 0;
+
+ /* Set Address Control register static configuration bits */
+ addrCtrl = MV_REG_READ(SDRAM_ADDR_CTRL_REG);
+
+ /* Set address control default value */
+ addrCtrl |= SDRAM_ADDR_CTRL_DV;
+
+ /* Clear DSize field */
+ addrCtrl &= ~SDRAM_DSIZE_MASK;
+
+ /* Note that density is in MB units */
+ switch (pBankInfo->deviceDensity)
+ {
+ case 128: /* 128 Mbit */
+ DB(mvOsPrintf("DRAM Device Density 128Mbit\n"));
+ addrCtrl |= SDRAM_DSIZE_128Mb;
+ break;
+ case 256: /* 256 Mbit */
+ DB(mvOsPrintf("DRAM Device Density 256Mbit\n"));
+ addrCtrl |= SDRAM_DSIZE_256Mb;
+ break;
+ case 512: /* 512 Mbit */
+ DB(mvOsPrintf("DRAM Device Density 512Mbit\n"));
+ addrCtrl |= SDRAM_DSIZE_512Mb;
+ break;
+ default:
+ mvOsPrintf("Dram: sdramAddrCtrl unsupported RAM-Device size %d\n",
+ pBankInfo->deviceDensity);
+ return -1;
+ }
+
+ /* SDRAM address control */
+ DB(mvOsPrintf("Dram: setting sdram address control with: %x \n", addrCtrl));
+
+ return addrCtrl;
+}
+
+/*******************************************************************************
+* sdramTimeCtrlLowRegCalc - Calculate sdram timing control low register
+*
+* DESCRIPTION:
+* This function calculates sdram timing control low register
+* optimized value based on the bank info parameters and the minCas.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+* busClk - Bus clock
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram timinf control low reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo,
+ MV_U32 minCas, MV_U32 busClk)
+{
+ MV_U32 tRp = 0;
+ MV_U32 tRrd = 0;
+ MV_U32 tRcd = 0;
+ MV_U32 tRas = 0;
+ MV_U32 tWr = 0;
+ MV_U32 tWtr = 0;
+ MV_U32 tRtp = 0;
+
+ MV_U32 bankNum;
+
+ busClk = busClk / 1000000; /* In MHz */
+
+ /* Scan all DRAM banks to find maximum timing values */
+ for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ tRp = MV_MAX(tRp, pBankInfo[bankNum].minRowPrechargeTime);
+ tRrd = MV_MAX(tRrd, pBankInfo[bankNum].minRowActiveToRowActive);
+ tRcd = MV_MAX(tRcd, pBankInfo[bankNum].minRasToCasDelay);
+ tRas = MV_MAX(tRas, pBankInfo[bankNum].minRasPulseWidth);
+ }
+
+ /* Extract timing (in ns) from SPD value. We ignore the tenth ns part. */
+ /* by shifting the data two bits right. */
+ tRp = tRp >> 2; /* For example 0x50 -> 20ns */
+ tRrd = tRrd >> 2;
+ tRcd = tRcd >> 2;
+
+ /* Extract clock cycles from time parameter. We need to round up */
+ tRp = ((busClk * tRp) / 1000) + (((busClk * tRp) % 1000) ? 1 : 0);
+ /* Micron work around for 133MHz */
+ if (busClk == 133)
+ tRp += 1;
+ DB(mvOsPrintf("Dram Timing Low: tRp = %d ", tRp));
+ tRrd = ((busClk * tRrd) / 1000) + (((busClk * tRrd) % 1000) ? 1 : 0);
+ /* JEDEC min reqeirments tRrd = 2 */
+ if (tRrd < 2)
+ tRrd = 2;
+ DB(mvOsPrintf("tRrd = %d ", tRrd));
+ tRcd = ((busClk * tRcd) / 1000) + (((busClk * tRcd) % 1000) ? 1 : 0);
+ DB(mvOsPrintf("tRcd = %d ", tRcd));
+ tRas = ((busClk * tRas) / 1000) + (((busClk * tRas) % 1000) ? 1 : 0);
+ DB(mvOsPrintf("tRas = %d ", tRas));
+
+ /* tWr and tWtr is different for DDR1 and DDR2. tRtp is only for DDR2 */
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+ {
+ /* Scan all DRAM banks to find maximum timing values */
+ for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ tWr = MV_MAX(tWr, pBankInfo[bankNum].minWriteRecoveryTime);
+ tWtr = MV_MAX(tWtr, pBankInfo[bankNum].minWriteToReadCmdDelay);
+ tRtp = MV_MAX(tRtp, pBankInfo[bankNum].minReadToPrechCmdDelay);
+ }
+
+ /* Extract timing (in ns) from SPD value. We ignore the tenth ns */
+ /* part by shifting the data two bits right. */
+ tWr = tWr >> 2; /* For example 0x50 -> 20ns */
+ tWtr = tWtr >> 2;
+ tRtp = tRtp >> 2;
+
+ /* Extract clock cycles from time parameter. We need to round up */
+ tWr = ((busClk * tWr) / 1000) + (((busClk * tWr) % 1000) ? 1 : 0);
+ DB(mvOsPrintf("tWr = %d ", tWr));
+ tWtr = ((busClk * tWtr) / 1000) + (((busClk * tWtr) % 1000) ? 1 : 0);
+ /* JEDEC min reqeirments tWtr = 2 */
+ if (tWtr < 2)
+ tWtr = 2;
+ DB(mvOsPrintf("tWtr = %d ", tWtr));
+ tRtp = ((busClk * tRtp) / 1000) + (((busClk * tRtp) % 1000) ? 1 : 0);
+ /* JEDEC min reqeirments tRtp = 2 */
+ if (tRtp < 2)
+ tRtp = 2;
+ DB(mvOsPrintf("tRtp = %d ", tRtp));
+ }
+ else
+ {
+ tWr = ((busClk*SDRAM_TWR) / 1000) + (((busClk*SDRAM_TWR) % 1000)?1:0);
+
+ if ((200 == busClk) || ((100 == busClk) && (DDR1_CL_1_5 == minCas)))
+ {
+ tWtr = 2;
+ }
+ else
+ {
+ tWtr = 1;
+ }
+
+ tRtp = 2; /* Must be set to 0x1 (two cycles) when using DDR1 */
+ }
+
+ DB(mvOsPrintf("tWtr = %d\n", tWtr));
+
+ /* Note: value of 0 in register means one cycle, 1 means two and so on */
+ return (((tRp - 1) << SDRAM_TRP_OFFS) |
+ ((tRrd - 1) << SDRAM_TRRD_OFFS) |
+ ((tRcd - 1) << SDRAM_TRCD_OFFS) |
+ ((tRas - 1) << SDRAM_TRAS_OFFS) |
+ ((tWr - 1) << SDRAM_TWR_OFFS) |
+ ((tWtr - 1) << SDRAM_TWTR_OFFS) |
+ ((tRtp - 1) << SDRAM_TRTP_OFFS));
+}
+
+/*******************************************************************************
+* sdramTimeCtrlHighRegCalc - Calculate sdram timing control high register
+*
+* DESCRIPTION:
+* This function calculates sdram timing control high register
+* optimized value based on the bank info parameters and the bus clock.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+* busClk - Bus clock
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram timinf control high reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo,
+ MV_U32 busClk)
+{
+ MV_U32 tRfc;
+ MV_U32 timeNs = 0;
+ int bankNum;
+ MV_U32 sdramTw2wCyc = 0;
+
+ busClk = busClk / 1000000; /* In MHz */
+
+ /* tRfc is different for DDR1 and DDR2. */
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+ {
+ MV_U32 bankNum;
+
+ /* Scan all DRAM banks to find maximum timing values */
+ for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ timeNs = MV_MAX(timeNs, pBankInfo[bankNum].minRefreshToActiveCmd);
+ }
+ else
+ {
+ if (pBankInfo[0].deviceDensity == _1G)
+ {
+ timeNs = SDRAM_TRFC_1G;
+ }
+ else
+ {
+ if (200 == busClk)
+ {
+ timeNs = SDRAM_TRFC_64_512M_AT_200MHZ;
+ }
+ else
+ {
+ timeNs = SDRAM_TRFC_64_512M;
+ }
+ }
+ }
+
+ tRfc = ((busClk * timeNs) / 1000) + (((busClk * timeNs) % 1000) ? 1 : 0);
+
+ DB(mvOsPrintf("Dram Timing High: tRfc = %d\n", tRfc));
+
+
+ /* Represent the populate banks in binary form */
+ for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ if (0 != pBankInfo[bankNum].size)
+ sdramTw2wCyc++;
+ }
+
+ /* If we have more the 1 bank then we need the TW2W in 1 for ODT switch */
+ if (sdramTw2wCyc > 1)
+ sdramTw2wCyc = 1;
+ else
+ sdramTw2wCyc = 0;
+
+ /* Note: value of 0 in register means one cycle, 1 means two and so on */
+ return ((((tRfc - 1) & SDRAM_TRFC_MASK) << SDRAM_TRFC_OFFS) |
+ ((SDRAM_TR2R_CYC - 1) << SDRAM_TR2R_OFFS) |
+ ((SDRAM_TR2WW2R_CYC - 1) << SDRAM_TR2W_W2R_OFFS) |
+ (((tRfc - 1) >> 4) << SDRAM_TRFC_EXT_OFFS) |
+ (sdramTw2wCyc << SDRAM_TW2W_OFFS));
+
+}
+
+/*******************************************************************************
+* sdramDDr2OdtConfig - Set DRAM DDR2 On Die Termination registers.
+*
+* DESCRIPTION:
+* This function config DDR2 On Die Termination (ODT) registers.
+* ODT configuration is done according to DIMM presence:
+*
+* Presence Ctrl Low Ctrl High Dunit Ctrl Ext Mode
+* CS0 0x84210000 0x00000000 0x0000780F 0x00000440
+* CS0+CS1 0x84210000 0x00000000 0x0000780F 0x00000440
+* CS0+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404
+* CS0+CS1+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404
+* CS0+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404
+* CS0+CS1+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404
+*
+* INPUT:
+* pBankInfo - bank info parameters.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* None
+*******************************************************************************/
+static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo)
+{
+ MV_U32 populateBanks = 0;
+ MV_U32 odtCtrlLow, odtCtrlHigh, dunitOdtCtrl;
+ int bankNum;
+
+ /* Represent the populate banks in binary form */
+ for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ if (0 != pBankInfo[bankNum].size)
+ {
+ populateBanks |= (1 << bankNum);
+ }
+ }
+
+ switch(populateBanks)
+ {
+ case(BANK_PRESENT_CS0):
+ odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_DV;
+ odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_DV;
+ dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_DV;
+ break;
+ case(BANK_PRESENT_CS0_CS1):
+ odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_DV;
+ odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_DV;
+ dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_DV;
+ break;
+ case(BANK_PRESENT_CS0_CS2):
+ odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV;
+ odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV;
+ dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV;
+ break;
+ case(BANK_PRESENT_CS0_CS1_CS2):
+ odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV;
+ odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV;
+ dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV;
+ break;
+ case(BANK_PRESENT_CS0_CS2_CS3):
+ odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV;
+ odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV;
+ dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV;
+ break;
+ case(BANK_PRESENT_CS0_CS2_CS3_CS4):
+ odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV;
+ odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV;
+ dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV;
+ break;
+ default:
+ mvOsPrintf("sdramDDr2OdtConfig: Invalid DRAM bank presence\n");
+ return;
+ }
+ MV_REG_WRITE(DRAM_BUF_REG7, odtCtrlLow);
+ MV_REG_WRITE(DRAM_BUF_REG8, odtCtrlHigh);
+ MV_REG_WRITE(DRAM_BUF_REG9, dunitOdtCtrl);
+ return;
+}
+#endif /* defined(MV_INC_BOARD_DDIM) */
+
+/*******************************************************************************
+* mvDramIfWinSet - Set DRAM interface address decode window
+*
+* DESCRIPTION:
+* This function sets DRAM interface address decode window.
+*
+* INPUT:
+* target - System target. Use only SDRAM targets.
+* pAddrDecWin - SDRAM address window structure.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK
+* otherwise.
+*******************************************************************************/
+MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin)
+{
+ MV_U32 baseReg=0,sizeReg=0;
+ MV_U32 baseToReg=0 , sizeToReg=0;
+
+ /* Check parameters */
+ if (!MV_TARGET_IS_DRAM(target))
+ {
+ mvOsPrintf("mvDramIfWinSet: target %d is not SDRAM\n", target);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check if the requested window overlaps with current enabled windows */
+ if (MV_TRUE == sdramIfWinOverlap(target, &pAddrDecWin->addrWin))
+ {
+ mvOsPrintf("mvDramIfWinSet: ERR. Target %d overlaps\n", target);
+ return MV_BAD_PARAM;
+ }
+
+ /* check if address is aligned to the size */
+ if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+ {
+ mvOsPrintf("mvDramIfWinSet:Error setting DRAM interface window %d."\
+ "\nAddress 0x%08x is unaligned to size 0x%x.\n",
+ target,
+ pAddrDecWin->addrWin.baseLow,
+ pAddrDecWin->addrWin.size);
+ return MV_ERROR;
+ }
+
+ /* read base register*/
+ baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(target));
+
+ /* read size register */
+ sizeReg = MV_REG_READ(SDRAM_SIZE_REG(target));
+
+ /* BaseLow[31:16] => base register [31:16] */
+ baseToReg = pAddrDecWin->addrWin.baseLow & SCBAR_BASE_MASK;
+
+ /* Write to address decode Base Address Register */
+ baseReg &= ~SCBAR_BASE_MASK;
+ baseReg |= baseToReg;
+
+ /* Translate the given window size to register format */
+ sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, SCSR_SIZE_ALIGNMENT);
+
+ /* Size parameter validity check. */
+ if (-1 == sizeToReg)
+ {
+ mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n",target);
+ return MV_BAD_PARAM;
+ }
+
+ /* set size */
+ sizeReg &= ~SCSR_SIZE_MASK;
+ /* Size is located at upper 16 bits */
+ sizeReg |= (sizeToReg << SCSR_SIZE_OFFS);
+
+ /* enable/Disable */
+ if (MV_TRUE == pAddrDecWin->enable)
+ {
+ sizeReg |= SCSR_WIN_EN;
+ }
+ else
+ {
+ sizeReg &= ~SCSR_WIN_EN;
+ }
+
+ /* 3) Write to address decode Base Address Register */
+ MV_REG_WRITE(SDRAM_BASE_ADDR_REG(target), baseReg);
+
+ /* Write to address decode Size Register */
+ MV_REG_WRITE(SDRAM_SIZE_REG(target), sizeReg);
+
+ return MV_OK;
+}
+/*******************************************************************************
+* mvDramIfWinGet - Get DRAM interface address decode window
+*
+* DESCRIPTION:
+* This function gets DRAM interface address decode window.
+*
+* INPUT:
+* target - System target. Use only SDRAM targets.
+*
+* OUTPUT:
+* pAddrDecWin - SDRAM address window structure.
+*
+* RETURN:
+* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK
+* otherwise.
+*******************************************************************************/
+MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin)
+{
+ MV_U32 baseReg,sizeReg;
+ MV_U32 sizeRegVal;
+
+ /* Check parameters */
+ if (!MV_TARGET_IS_DRAM(target))
+ {
+ mvOsPrintf("mvDramIfWinGet: target %d is Illigal\n", target);
+ return MV_ERROR;
+ }
+
+ /* Read base and size registers */
+ sizeReg = MV_REG_READ(SDRAM_SIZE_REG(target));
+ baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(target));
+
+ sizeRegVal = (sizeReg & SCSR_SIZE_MASK) >> SCSR_SIZE_OFFS;
+
+ pAddrDecWin->addrWin.size = ctrlRegToSize(sizeRegVal,
+ SCSR_SIZE_ALIGNMENT);
+
+ /* Check if ctrlRegToSize returned OK */
+ if (-1 == pAddrDecWin->addrWin.size)
+ {
+ mvOsPrintf("mvDramIfWinGet: size of target %d is Illigal\n", target);
+ return MV_ERROR;
+ }
+
+ /* Extract base address */
+ /* Base register [31:16] ==> baseLow[31:16] */
+ pAddrDecWin->addrWin.baseLow = baseReg & SCBAR_BASE_MASK;
+
+ pAddrDecWin->addrWin.baseHigh = 0;
+
+
+ if (sizeReg & SCSR_WIN_EN)
+ {
+ pAddrDecWin->enable = MV_TRUE;
+ }
+ else
+ {
+ pAddrDecWin->enable = MV_FALSE;
+ }
+
+ return MV_OK;
+}
+/*******************************************************************************
+* mvDramIfWinEnable - Enable/Disable SDRAM address decode window
+*
+* DESCRIPTION:
+* This function enable/Disable SDRAM address decode window.
+*
+* INPUT:
+* target - System target. Use only SDRAM targets.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_ERROR in case function parameter are invalid, MV_OK otherewise.
+*
+*******************************************************************************/
+MV_STATUS mvDramIfWinEnable(MV_TARGET target,MV_BOOL enable)
+{
+ MV_DRAM_DEC_WIN addrDecWin;
+
+ /* Check parameters */
+ if (!MV_TARGET_IS_DRAM(target))
+ {
+ mvOsPrintf("mvDramIfWinEnable: target %d is Illigal\n", target);
+ return MV_ERROR;
+ }
+
+ if (enable == MV_TRUE)
+ { /* First check for overlap with other enabled windows */
+ if (MV_OK != mvDramIfWinGet(target, &addrDecWin))
+ {
+ mvOsPrintf("mvDramIfWinEnable:ERR. Getting target %d failed.\n",
+ target);
+ return MV_ERROR;
+ }
+ /* Check for overlapping */
+ if (MV_FALSE == sdramIfWinOverlap(target, &(addrDecWin.addrWin)))
+ {
+ /* No Overlap. Enable address decode winNum window */
+ MV_REG_BIT_SET(SDRAM_SIZE_REG(target), SCSR_WIN_EN);
+ }
+ else
+ { /* Overlap detected */
+ mvOsPrintf("mvDramIfWinEnable: ERR. Target %d overlap detect\n",
+ target);
+ return MV_ERROR;
+ }
+ }
+ else
+ { /* Disable address decode winNum window */
+ MV_REG_BIT_RESET(SDRAM_SIZE_REG(target), SCSR_WIN_EN);
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* sdramIfWinOverlap - Check if an address window overlap an SDRAM address window
+*
+* DESCRIPTION:
+* This function scan each SDRAM address decode window to test if it
+* overlapps the given address windoow
+*
+* INPUT:
+* target - SDRAM target where the function skips checking.
+* pAddrDecWin - The tested address window for overlapping with
+* SDRAM windows.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if the given address window overlaps any enabled address
+* decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin)
+{
+ MV_TARGET targetNum;
+ MV_DRAM_DEC_WIN addrDecWin;
+
+ for(targetNum = SDRAM_CS0; targetNum < MV_DRAM_MAX_CS ; targetNum++)
+ {
+ /* don't check our winNum or illegal targets */
+ if (targetNum == target)
+ {
+ continue;
+ }
+
+ /* Get window parameters */
+ if (MV_OK != mvDramIfWinGet(targetNum, &addrDecWin))
+ {
+ mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n");
+ return MV_ERROR;
+ }
+
+ /* Do not check disabled windows */
+ if (MV_FALSE == addrDecWin.enable)
+ {
+ continue;
+ }
+
+ if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin))
+ {
+ mvOsPrintf(
+ "sdramIfWinOverlap: Required target %d overlap winNum %d\n",
+ target, targetNum);
+ return MV_TRUE;
+ }
+ }
+
+ return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvDramIfBankSizeGet - Get DRAM interface bank size.
+*
+* DESCRIPTION:
+* This function returns the size of a given DRAM bank.
+*
+* INPUT:
+* bankNum - Bank number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* DRAM bank size. If bank is disabled the function return '0'. In case
+* or paramter is invalid, the function returns -1.
+*
+*******************************************************************************/
+MV_32 mvDramIfBankSizeGet(MV_U32 bankNum)
+{
+ MV_DRAM_DEC_WIN addrDecWin;
+
+ /* Check parameters */
+ if (!MV_TARGET_IS_DRAM(bankNum))
+ {
+ mvOsPrintf("mvDramIfBankBaseGet: bankNum %d is invalid\n", bankNum);
+ return -1;
+ }
+ /* Get window parameters */
+ if (MV_OK != mvDramIfWinGet(bankNum, &addrDecWin))
+ {
+ mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n");
+ return -1;
+ }
+
+ if (MV_TRUE == addrDecWin.enable)
+ {
+ return addrDecWin.addrWin.size;
+ }
+ else
+ {
+ return 0;
+ }
+}
+
+
+/*******************************************************************************
+* mvDramIfSizeGet - Get DRAM interface total size.
+*
+* DESCRIPTION:
+* This function get the DRAM total size.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* DRAM total size. In case or paramter is invalid, the function
+* returns -1.
+*
+*******************************************************************************/
+MV_32 mvDramIfSizeGet(MV_VOID)
+{
+ MV_U32 totalSize = 0, bankSize = 0, bankNum;
+
+ for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ bankSize = mvDramIfBankSizeGet(bankNum);
+
+ if (-1 == bankSize)
+ {
+ mvOsPrintf("Dram: mvDramIfSizeGet error with bank %d \n",bankNum);
+ return -1;
+ }
+ else
+ {
+ totalSize += bankSize;
+ }
+ }
+
+ DB(mvOsPrintf("Dram: Total DRAM size is 0x%x \n",totalSize));
+
+ return totalSize;
+}
+
+/*******************************************************************************
+* mvDramIfBankBaseGet - Get DRAM interface bank base.
+*
+* DESCRIPTION:
+* This function returns the 32 bit base address of a given DRAM bank.
+*
+* INPUT:
+* bankNum - Bank number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* DRAM bank size. If bank is disabled or paramter is invalid, the
+* function returns -1.
+*
+*******************************************************************************/
+MV_32 mvDramIfBankBaseGet(MV_U32 bankNum)
+{
+ MV_DRAM_DEC_WIN addrDecWin;
+
+ /* Check parameters */
+ if (!MV_TARGET_IS_DRAM(bankNum))
+ {
+ mvOsPrintf("mvDramIfBankBaseGet: bankNum %d is invalid\n", bankNum);
+ return -1;
+ }
+ /* Get window parameters */
+ if (MV_OK != mvDramIfWinGet(bankNum, &addrDecWin))
+ {
+ mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n");
+ return -1;
+ }
+
+ if (MV_TRUE == addrDecWin.enable)
+ {
+ return addrDecWin.addrWin.baseLow;
+ }
+ else
+ {
+ return -1;
+ }
+}
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvDramIfh
+#define __INCmvDramIfh
+
+/* includes */
+#include "ddr1_2/mvDramIfRegs.h"
+#include "ddr1_2/mvDramIfConfig.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* defines */
+/* DRAM Timing parameters */
+#define SDRAM_TWR 15 /* ns tWr */
+#define SDRAM_TRFC_64_512M_AT_200MHZ 70 /* ns tRfc for dens 64-512 @ 200MHz */
+#define SDRAM_TRFC_64_512M 75 /* ns tRfc for dens 64-512 */
+#define SDRAM_TRFC_1G 120 /* ns tRfc for dens 1GB */
+#define SDRAM_TR2R_CYC 1 /* cycle for tR2r */
+#define SDRAM_TR2WW2R_CYC 1 /* cycle for tR2wW2r */
+
+/* typedefs */
+
+/* enumeration for memory types */
+typedef enum _mvMemoryType
+{
+ MEM_TYPE_SDRAM,
+ MEM_TYPE_DDR1,
+ MEM_TYPE_DDR2
+}MV_MEMORY_TYPE;
+
+/* enumeration for DDR1 supported CAS Latencies */
+typedef enum _mvDimmDdr1Cas
+{
+ DDR1_CL_1_5 = 0x02,
+ DDR1_CL_2 = 0x04,
+ DDR1_CL_2_5 = 0x08,
+ DDR1_CL_3 = 0x10,
+ DDR1_CL_4 = 0x40,
+ DDR1_CL_FAULT
+} MV_DIMM_DDR1_CAS;
+
+/* enumeration for DDR2 supported CAS Latencies */
+typedef enum _mvDimmDdr2Cas
+{
+ DDR2_CL_3 = 0x08,
+ DDR2_CL_4 = 0x10,
+ DDR2_CL_5 = 0x20,
+ DDR2_CL_FAULT
+} MV_DIMM_DDR2_CAS;
+
+
+typedef struct _mvDramBankInfo
+{
+ MV_MEMORY_TYPE memoryType; /* DDR1, DDR2 or SDRAM */
+
+ /* DIMM dimensions */
+ MV_U32 numOfRowAddr;
+ MV_U32 numOfColAddr;
+ MV_U32 dataWidth;
+ MV_U32 errorCheckType; /* ECC , PARITY..*/
+ MV_U32 sdramWidth; /* 4,8,16 or 32 */
+ MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */
+ MV_U32 burstLengthSupported;
+ MV_U32 numOfBanksOnEachDevice;
+ MV_U32 suportedCasLatencies;
+ MV_U32 refreshInterval;
+
+ /* DIMM timing parameters */
+ MV_U32 minCycleTimeAtMaxCasLatPs;
+ MV_U32 minCycleTimeAtMaxCasLatMinus1Ps;
+ MV_U32 minCycleTimeAtMaxCasLatMinus2Ps;
+ MV_U32 minRowPrechargeTime;
+ MV_U32 minRowActiveToRowActive;
+ MV_U32 minRasToCasDelay;
+ MV_U32 minRasPulseWidth;
+ MV_U32 minWriteRecoveryTime; /* DDR2 only */
+ MV_U32 minWriteToReadCmdDelay; /* DDR2 only */
+ MV_U32 minReadToPrechCmdDelay; /* DDR2 only */
+ MV_U32 minRefreshToActiveCmd; /* DDR2 only */
+
+ /* Parameters calculated from the extracted DIMM information */
+ MV_U32 size;
+ MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit */
+ MV_U32 numberOfDevices;
+
+ /* DIMM attributes (MV_TRUE for yes) */
+ MV_BOOL registeredAddrAndControlInputs;
+
+}MV_DRAM_BANK_INFO;
+
+/* This structure describes CPU interface address decode window */
+typedef struct _mvDramIfDecWin
+{
+ MV_ADDR_WIN addrWin; /* An address window*/
+ MV_BOOL enable; /* Address decode window is enabled/disabled */
+}MV_DRAM_DEC_WIN;
+
+#include "ddr1_2/mvDram.h"
+
+/* mvDramIf.h API list */
+MV_VOID mvDramIfBasicAsmInit(MV_VOID);
+MV_STATUS mvDramIfDetect(MV_U32 forcedCl);
+MV_VOID _mvDramIfConfig(MV_VOID);
+
+MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvDramIfWinEnable(MV_TARGET target,MV_BOOL enable);
+MV_32 mvDramIfBankSizeGet(MV_U32 bankNum);
+MV_32 mvDramIfBankBaseGet(MV_U32 bankNum);
+MV_32 mvDramIfSizeGet(MV_VOID);
+
+#if 0
+MV_STATUS mvDramIfMbusCtrlSet(MV_XBAR_TARGET *pPizzaArbArray);
+MV_STATUS mvDramIfMbusToutSet(MV_U32 timeout, MV_BOOL enable);
+#endif
+
+#endif /* __INCmvDramIfh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvDramIfConfigh
+#define __INCmvDramIfConfigh
+
+/* includes */
+
+/* defines */
+
+/* registers defaults values */
+
+#define SDRAM_CONFIG_DV \
+ (SDRAM_PERR_WRITE | \
+ SDRAM_SRMODE | \
+ SDRAM_SRCLK_GATED)
+
+#define SDRAM_DUNIT_CTRL_LOW_DV \
+ (SDRAM_CTRL_POS_RISE | \
+ SDRAM_CLK1DRV_NORMAL | \
+ SDRAM_LOCKEN_ENABLE)
+
+#define SDRAM_ADDR_CTRL_DV 0
+
+#define SDRAM_TIMING_CTRL_LOW_REG_DV \
+ ((0x2 << SDRAM_TRCD_OFFS) | \
+ (0x2 << SDRAM_TRP_OFFS) | \
+ (0x1 << SDRAM_TWR_OFFS) | \
+ (0x0 << SDRAM_TWTR_OFFS) | \
+ (0x5 << SDRAM_TRAS_OFFS) | \
+ (0x1 << SDRAM_TRRD_OFFS))
+/* TRFC 0x27, TW2W 0x1 */
+#define SDRAM_TIMING_CTRL_HIGH_REG_DV (( 0x7 << SDRAM_TRFC_OFFS ) |\
+ ( 0x2 << SDRAM_TRFC_EXT_OFFS) |\
+ ( 0x1 << SDRAM_TW2W_OFFS))
+
+#define SDRAM_OPEN_PAGES_CTRL_REG_DV SDRAM_OPEN_PAGE_EN
+
+/* DDR2 ODT default register values */
+
+/* Presence Ctrl Low Ctrl High Dunit Ctrl Ext Mode */
+/* CS0 0x84210000 0x00000000 0x0000780F 0x00000440 */
+/* CS0+CS1 0x84210000 0x00000000 0x0000780F 0x00000440 */
+/* CS0+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */
+/* CS0+CS1+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */
+/* CS0+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */
+/* CS0+CS1+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */
+
+#define DDR2_ODT_CTRL_LOW_CS0_DV 0x84210000
+#define DDR2_ODT_CTRL_HIGH_CS0_DV 0x00000000
+#define DDR2_DUNIT_ODT_CTRL_CS0_DV 0x0000780F
+#define DDR_SDRAM_EXT_MODE_CS0_DV 0x00000440
+
+#define DDR2_ODT_CTRL_LOW_CS0_CS2_DV 0x030C030C
+#define DDR2_ODT_CTRL_HIGH_CS0_CS2_DV 0x00000000
+#define DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV 0x0000740F
+#define DDR_SDRAM_EXT_MODE_CS0_CS2_DV 0x00000404
+
+
+/* DDR SDRAM Adderss/Control and Data Pads Calibration default values */
+#define DDR1_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV \
+ (1 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+#define DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV \
+ (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+
+
+#define DDR1_DATA_PAD_STRENGTH_TYPICAL_DV \
+ (1 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+#define DDR2_DATA_PAD_STRENGTH_TYPICAL_DV \
+ (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+
+/* DDR SDRAM Mode Register default value */
+#define DDR1_MODE_REG_DV 0x00000000
+#define DDR2_MODE_REG_DV 0x00000400
+
+/* DDR SDRAM Timing parameter default values */
+#define DDR1_TIMING_LOW_DV 0x11602220
+#define DDR1_TIMING_HIGH_DV 0x0000000d
+
+#define DDR2_TIMING_LOW_DV 0x11812220
+#define DDR2_TIMING_HIGH_DV 0x0000030f
+
+/* For Guideline (GL# MEM-4) DQS Reference Delay Tuning */
+#define FTDLL_DDR1_166MHZ ((0x1 << 0) | \
+ (0x7F<< 12) | \
+ (0x1 << 22))
+
+#define FTDLL_DDR1_133MHZ FTDLL_DDR1_166MHZ
+
+#define FTDLL_DDR1_200MHZ ((0x1 << 0) | \
+ (0x1 << 12) | \
+ (0x3 << 14) | \
+ (0x1 << 18) | \
+ (0x1 << 22))
+
+
+#define FTDLL_DDR2_166MHZ ((0x1 << 0) | \
+ (0x1 << 12) | \
+ (0x1 << 14) | \
+ (0x1 << 16) | \
+ (0x1 << 19) | \
+ (0xF << 20))
+
+#define FTDLL_DDR2_133MHZ FTDLL_DDR2_166MHZ
+
+#define FTDLL_DDR2_200MHZ ((0x1 << 0) | \
+ (0x1 << 12) | \
+ (0x1 << 14) | \
+ (0x1 << 16) | \
+ (0x1 << 19) | \
+ (0xF << 20))
+
+#define FTDLL_DDR2_250MHZ 0x445001
+
+/* Orion 1 B1 and above */
+#define FTDLL_DDR1_166MHZ_5181_B1 0x45D001
+
+/* Orion nas */
+#define FTDLL_DDR2_166MHZ_5182 0x597001
+
+/* Orion 2 D0 and above */
+#define FTDLL_DDR1_166MHZ_5281_D0 0x8D0001
+#define FTDLL_DDR1_200MHZ_5281_D0 0x8D0001
+#define FTDLL_DDR2_166MHZ_5281_D0 0x485001
+#define FTDLL_DDR2_200MHZ_5281_D0 0x485001
+#define FTDLL_DDR2_250MHZ_5281_D0 0x445001
+#define FTDLL_DDR2_200MHZ_5281_D1 0x995001
+#define FTDLL_DDR2_250MHZ_5281_D1 0x984801
+
+#endif /* __INCmvDramIfh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDramIfRegsh
+#define __INCmvDramIfRegsh
+
+
+/* DDR SDRAM Controller Address Decode Registers */
+/* SDRAM CSn Base Address Register (SCBAR) */
+#define SDRAM_BASE_ADDR_REG(csNum) (0x1500 + (csNum * 8))
+#define SCBAR_BASE_OFFS 16
+#define SCBAR_BASE_MASK (0xffff << SCBAR_BASE_OFFS)
+#define SCBAR_BASE_ALIGNMENT 0x10000
+
+/* SDRAM CSn Size Register (SCSR) */
+#define SDRAM_SIZE_REG(csNum) (0x1504 + (csNum * 8))
+#define SCSR_WIN_EN BIT0
+#define SCSR_SIZE_OFFS 16
+#define SCSR_SIZE_MASK (0xffff << SCSR_SIZE_OFFS)
+#define SCSR_SIZE_ALIGNMENT 0x10000
+
+/* configuration register */
+#define SDRAM_CONFIG_REG 0x1400
+#define SDRAM_REFRESH_OFFS 0
+#define SDRAM_REFRESH_MAX 0x3000
+#define SDRAM_REFRESH_MASK (SDRAM_REFRESH_MAX << SDRAM_REFRESH_OFFS)
+#define SDRAM_DWIDTH_OFFS 14
+#define SDRAM_DWIDTH_MASK (3 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_DWIDTH_16BIT (1 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_DWIDTH_32BIT (2 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_DTYPE_OFFS 16
+#define SDRAM_DTYPE_MASK (1 << SDRAM_DTYPE_OFFS)
+#define SDRAM_DTYPE_DDR1 (0 << SDRAM_DTYPE_OFFS)
+#define SDRAM_DTYPE_DDR2 (1 << SDRAM_DTYPE_OFFS)
+#define SDRAM_REGISTERED (1 << 17)
+#define SDRAM_PERR_OFFS 18
+#define SDRAM_PERR_MASK (1 << SDRAM_PERR_OFFS)
+#define SDRAM_PERR_NO_WRITE (0 << SDRAM_PERR_OFFS)
+#define SDRAM_PERR_WRITE (1 << SDRAM_PERR_OFFS)
+#define SDRAM_DCFG_OFFS 20
+#define SDRAM_DCFG_MASK (0x3 << SDRAM_DCFG_OFFS)
+#define SDRAM_DCFG_X16_DEV (1 << SDRAM_DCFG_OFFS)
+#define SDRAM_DCFG_X8_DEV (2 << SDRAM_DCFG_OFFS)
+#define SDRAM_SRMODE (1 << 24)
+#define SDRAM_SRCLK_OFFS 25
+#define SDRAM_SRCLK_MASK (1 << SDRAM_SRCLK_OFFS)
+#define SDRAM_SRCLK_KEPT (0 << SDRAM_SRCLK_OFFS)
+#define SDRAM_SRCLK_GATED (1 << SDRAM_SRCLK_OFFS)
+#define SDRAM_CATTH_OFFS 26
+#define SDRAM_CATTHR_EN (1 << SDRAM_CATTH_OFFS)
+
+
+/* dunit control register */
+#define SDRAM_DUNIT_CTRL_REG 0x1404
+#define SDRAM_CTRL_POS_OFFS 6
+#define SDRAM_CTRL_POS_FALL (0 << SDRAM_CTRL_POS_OFFS)
+#define SDRAM_CTRL_POS_RISE (1 << SDRAM_CTRL_POS_OFFS)
+#define SDRAM_CLK1DRV_OFFS 12
+#define SDRAM_CLK1DRV_MASK (1 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_CLK1DRV_HIGH_Z (0 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_CLK1DRV_NORMAL (1 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_LOCKEN_OFFS 18
+#define SDRAM_LOCKEN_MASK (1 << SDRAM_LOCKEN_OFFS)
+#define SDRAM_LOCKEN_DISABLE (0 << SDRAM_LOCKEN_OFFS)
+#define SDRAM_LOCKEN_ENABLE (1 << SDRAM_LOCKEN_OFFS)
+#define SDRAM_ST_BURST_DEL_OFFS 24
+#define SDRAM_ST_BURST_DEL_MAX 0xf
+#define SDRAM_ST_BURST_DEL_MASK (SDRAM_ST_BURST_DEL_MAX<<SDRAM_ST_BURST_DEL_OFFS)
+
+/* sdram timing control low register */
+#define SDRAM_TIMING_CTRL_LOW_REG 0x1408
+#define SDRAM_TRCD_OFFS 4
+#define SDRAM_TRCD_MASK (0xF << SDRAM_TRCD_OFFS)
+#define SDRAM_TRP_OFFS 8
+#define SDRAM_TRP_MASK (0xF << SDRAM_TRP_OFFS)
+#define SDRAM_TWR_OFFS 12
+#define SDRAM_TWR_MASK (0xF << SDRAM_TWR_OFFS)
+#define SDRAM_TWTR_OFFS 16
+#define SDRAM_TWTR_MASK (0xF << SDRAM_TWTR_OFFS)
+#define SDRAM_TRAS_OFFS 20
+#define SDRAM_TRAS_MASK (0xF << SDRAM_TRAS_OFFS)
+#define SDRAM_TRRD_OFFS 24
+#define SDRAM_TRRD_MASK (0xF << SDRAM_TRRD_OFFS)
+#define SDRAM_TRTP_OFFS 28
+#define SDRAM_TRTP_MASK (0xF << SDRAM_TRTP_OFFS)
+
+/* sdram timing control high register */
+#define SDRAM_TIMING_CTRL_HIGH_REG 0x140c
+#define SDRAM_TRFC_OFFS 0
+#define SDRAM_TRFC_MASK (0xF << SDRAM_TRFC_OFFS)
+#define SDRAM_TR2R_OFFS 4
+#define SDRAM_TR2R_MASK (0x3 << SDRAM_TR2R_OFFS)
+#define SDRAM_TR2W_W2R_OFFS 6
+#define SDRAM_TR2W_W2R_MASK (0x3 << SDRAM_TR2W_W2R_OFFS)
+#define SDRAM_TRFC_EXT_OFFS 8
+#define SDRAM_TRFC_EXT_MASK (0x1 << SDRAM_TRFC_EXT_OFFS)
+#define SDRAM_TW2W_OFFS 10
+#define SDRAM_TW2W_MASK (0x1 << SDRAM_TW2W_OFFS)
+
+/* address control register */
+#define SDRAM_ADDR_CTRL_REG 0x1410
+#define SDRAM_DSIZE_OFFS 4
+#define SDRAM_DSIZE_MASK (0x3 << SDRAM_DSIZE_OFFS)
+#define SDRAM_DSIZE_128Mb (0x0 << SDRAM_DSIZE_OFFS)
+#define SDRAM_DSIZE_256Mb (0x1 << SDRAM_DSIZE_OFFS)
+#define SDRAM_DSIZE_512Mb (0x2 << SDRAM_DSIZE_OFFS)
+
+/* SDRAM Open Pages Control registers */
+#define SDRAM_OPEN_PAGE_CTRL_REG 0x1414
+#define SDRAM_OPEN_PAGE_EN (0 << 0)
+#define SDRAM_OPEN_PAGE_DIS (1 << 0)
+
+/* sdram opertion register */
+#define SDRAM_OPERATION_REG 0x1418
+#define SDRAM_CMD_OFFS 0
+#define SDRAM_CMD_MASK (0x7 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_NORMAL (0x0 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_PRECHARGE_ALL (0x1 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_REFRESH_ALL (0x2 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_REG_SET_CMD (0x3 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EXT_MODE_SET (0x4 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_NOP (0x5 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_SLF_RFRSH (0x7 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EMRS2_CMD (0x8 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EMRS3_CMD (0x9 << SDRAM_CMD_OFFS)
+
+/* sdram mode register */
+#define SDRAM_MODE_REG 0x141c
+#define SDRAM_BURST_LEN_OFFS 0
+#define SDRAM_BURST_LEN_MASK (0x7 << SDRAM_BURST_LEN_OFFS)
+#define SDRAM_BURST_LEN_4 (0x2 << SDRAM_BURST_LEN_OFFS)
+#define SDRAM_CL_OFFS 4
+#define SDRAM_CL_MASK (0x7 << SDRAM_CL_OFFS)
+#define SDRAM_DDR1_CL_2 (0x2 << SDRAM_CL_OFFS)
+#define SDRAM_DDR1_CL_3 (0x3 << SDRAM_CL_OFFS)
+#define SDRAM_DDR1_CL_4 (0x4 << SDRAM_CL_OFFS)
+#define SDRAM_DDR1_CL_1_5 (0x5 << SDRAM_CL_OFFS)
+#define SDRAM_DDR1_CL_2_5 (0x6 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_3 (0x3 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_4 (0x4 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_5 (0x5 << SDRAM_CL_OFFS)
+#define SDRAM_TM_OFFS 7
+#define SDRAM_TM_MASK (1 << SDRAM_TM_OFFS)
+#define SDRAM_TM_NORMAL (0 << SDRAM_TM_OFFS)
+#define SDRAM_TM_TEST_MODE (1 << SDRAM_TM_OFFS)
+#define SDRAM_DLL_OFFS 8
+#define SDRAM_DLL_MASK (1 << SDRAM_DLL_OFFS)
+#define SDRAM_DLL_NORMAL (0 << SDRAM_DLL_OFFS)
+#define SDRAM_DLL_RESET (1 << SDRAM_DLL_OFFS)
+#define SDRAM_WR_OFFS 11
+#define SDRAM_WR_MAX 7
+#define SDRAM_WR_MASK (SDRAM_WR_MAX << SDRAM_WR_OFFS)
+#define SDRAM_PD_OFFS 12
+#define SDRAM_PD_MASK (1 << SDRAM_PD_OFFS)
+#define SDRAM_PD_FAST_EXIT (0 << SDRAM_PD_OFFS)
+#define SDRAM_PD_SLOW_EXIT (1 << SDRAM_PD_OFFS)
+
+/* DDR SDRAM Extended Mode register (DSEMR) */
+#define SDRAM_EXTENDED_MODE_REG 0x1420
+#define DSEMR_DLL_ENABLE (1 << 0)
+#define DSEMR_DS_OFFS 1
+#define DSEMR_DS_MASK (1 << DSEMR_DS_OFFS)
+#define DSEMR_DS_NORMAL (0 << DSEMR_DS_OFFS)
+#define DSEMR_DS_REDUCED (1 << DSEMR_DS_OFFS)
+#define DSEMR_RTT0_OFFS 2
+#define DSEMR_RTT1_OFFS 6
+#define DSEMR_RTT_ODT_DISABLE ((0 << DSEMR_RTT0_OFFS)||(0 << DSEMR_RTT1_OFFS))
+#define DSEMR_RTT_ODT_75_OHM ((1 << DSEMR_RTT0_OFFS)||(0 << DSEMR_RTT1_OFFS))
+#define DSEMR_RTT_ODT_150_OHM ((0 << DSEMR_RTT0_OFFS)||(1 << DSEMR_RTT1_OFFS))
+#define DSEMR_OCD_OFFS 7
+#define DSEMR_OCD_MASK (0x7 << DSEMR_OCD_OFFS)
+#define DSEMR_OCD_EXIT_CALIB (0 << DSEMR_OCD_OFFS)
+#define DSEMR_OCD_DRIVE1 (1 << DSEMR_OCD_OFFS)
+#define DSEMR_OCD_DRIVE0 (2 << DSEMR_OCD_OFFS)
+#define DSEMR_OCD_ADJUST_MODE (4 << DSEMR_OCD_OFFS)
+#define DSEMR_OCD_CALIB_DEFAULT (7 << DSEMR_OCD_OFFS)
+#define DSEMR_DQS_OFFS 10
+#define DSEMR_DQS_MASK (1 << DSEMR_DQS_OFFS)
+#define DSEMR_DQS_DIFFERENTIAL (0 << DSEMR_DQS_OFFS)
+#define DSEMR_DQS_SINGLE_ENDED (0 << DSEMR_DQS_OFFS)
+#define DSEMR_RDQS_ENABLE (1 << 11)
+#define DSEMR_QOFF_OUTPUT_BUFF_EN (1 << 12)
+
+/* DDR SDRAM Operation Control Register */
+#define SDRAM_OPERATION_CTRL_REG 0x142c
+
+/* Dunit FTDLL Configuration Register */
+#define SDRAM_FTDLL_CONFIG_REG 0x1484
+
+/* Pads Calibration register */
+#define SDRAM_ADDR_CTRL_PADS_CAL_REG 0x14c0
+#define SDRAM_DATA_PADS_CAL_REG 0x14c4
+#define SDRAM_DRVN_OFFS 0
+#define SDRAM_DRVN_MASK (0x3F << SDRAM_DRVN_OFFS)
+#define SDRAM_DRVP_OFFS 6
+#define SDRAM_DRVP_MASK (0x3F << SDRAM_DRVP_OFFS)
+#define SDRAM_PRE_DRIVER_STRENGTH_OFFS 12
+#define SDRAM_PRE_DRIVER_STRENGTH_MASK (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+#define SDRAM_TUNE_EN BIT16
+#define SDRAM_LOCK_OFFS 17
+#define SDRAM_LOCK_MAKS (0x1F << SDRAM_LOCK_OFFS)
+#define SDRAM_LOCKN_OFFS 17
+#define SDRAM_LOCKN_MAKS (0x3F << SDRAM_LOCKN_OFFS)
+#define SDRAM_LOCKP_OFFS 23
+#define SDRAM_LOCKP_MAKS (0x3F << SDRAM_LOCKP_OFFS)
+#define SDRAM_WR_EN (1 << 31)
+
+/* DDR2 SDRAM ODT Control (Low) Register (DSOCLR) */
+#define DDR2_SDRAM_ODT_CTRL_LOW_REG 0x1494
+#define DSOCLR_ODT_RD_OFFS(odtNum) (odtNum * 4)
+#define DSOCLR_ODT_RD_MASK(odtNum) (0xf << DSOCLR_ODT_RD_OFFS(odtNum))
+#define DSOCLR_ODT_RD(odtNum, bank) ((1 << bank) << DSOCLR_ODT_RD_OFFS(odtNum))
+#define DSOCLR_ODT_WR_OFFS(odtNum) (16 + (odtNum * 4))
+#define DSOCLR_ODT_WR_MASK(odtNum) (0xf << DSOCLR_ODT_WR_OFFS(odtNum))
+#define DSOCLR_ODT_WD(odtNum, bank) ((1 << bank) << DSOCLR_ODT_WR_OFFS(odtNum))
+
+/* DDR2 SDRAM ODT Control (High) Register (DSOCHR) */
+#define DDR2_SDRAM_ODT_CTRL_HIGH_REG 0x1498
+/* Optional control values to DSOCHR_ODT_EN macro */
+#define DDR2_ODT_CTRL_DUNIT 0
+#define DDR2_ODT_CTRL_NEVER 1
+#define DDR2_ODT_CTRL_ALWAYS 3
+#define DSOCHR_ODT_EN_OFFS(odtNum) (odtNum * 2)
+#define DSOCHR_ODT_EN_MASK(odtNum) (0x3 << DSOCHR_ODT_EN_OFFS(odtNum))
+#define DSOCHR_ODT_EN(odtNum, ctrl) ((1 << ctrl) << DSOCHR_ODT_RD_OFFS(odtNum))
+
+/* DDR2 Dunit ODT Control Register (DDOCR)*/
+#define DDR2_DUNIT_ODT_CONTROL_REG 0x149c
+#define DDOCR_ODT_RD_OFFS 0
+#define DDOCR_ODT_RD_MASK (0xf << DDOCR_ODT_RD_OFFS)
+#define DDOCR_ODT_RD(bank) ((1 << bank) << DDOCR_ODT_RD_OFFS)
+#define DDOCR_ODT_WR_OFFS 4
+#define DDOCR_ODT_WR_MASK (0xf << DDOCR_ODT_WR_OFFS)
+#define DDOCR_ODT_WR(bank) ((1 << bank) << DDOCR_ODT_WR_OFFS)
+#define DSOCR_ODT_EN_OFFS 8
+#define DSOCR_ODT_EN_MASK (0x3 << DSOCR_ODT_EN_OFFS)
+#define DSOCR_ODT_EN(ctrl) ((1 << ctrl) << DSOCR_ODT_EN_OFFS)
+#define DSOCR_ODT_SEL_OFFS 10
+#define DSOCR_ODT_SEL_MASK (0x3 << DSOCR_ODT_SEL_OFFS)
+
+/* DDR SDRAM Initialization Control Register (DSICR) */
+#define DDR_SDRAM_INIT_CTRL_REG 0x1480
+#define DSICR_INIT_EN (1 << 0)
+
+#endif /* __INCmvDramIfRegsh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#include "ddr2/mvDramIf.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+#include "ddr2/mvDramIfStaticInit.h"
+
+/* #define MV_DEBUG */
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+/* DRAM bank presence encoding */
+#define BANK_PRESENT_CS0 0x1
+#define BANK_PRESENT_CS0_CS1 0x3
+#define BANK_PRESENT_CS0_CS2 0x5
+#define BANK_PRESENT_CS0_CS1_CS2 0x7
+#define BANK_PRESENT_CS0_CS2_CS3 0xd
+#define BANK_PRESENT_CS0_CS2_CS3_CS4 0xf
+
+/* locals */
+#ifndef MV_STATIC_DRAM_ON_BOARD
+static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk, MV_STATUS TTmode );
+static MV_U32 dunitCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk);
+static MV_U32 sdramModeRegCalc(MV_U32 minCas);
+static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk);
+static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfoDIMM1);
+static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk);
+static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk, MV_U32 forcedCl);
+static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk);
+static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk);
+static MV_U32 sdramDdr2TimeLoRegCalc(MV_U32 minCas);
+static MV_U32 sdramDdr2TimeHiRegCalc(MV_U32 minCas);
+#endif
+MV_32 DRAM_CS_Order[MV_DRAM_MAX_CS] = {N_A
+
+#ifdef MV_INCLUDE_SDRAM_CS1
+ ,N_A
+#endif
+#ifdef MV_INCLUDE_SDRAM_CS2
+ ,N_A
+#endif
+#ifdef MV_INCLUDE_SDRAM_CS3
+ ,N_A
+#endif
+ };
+/* Get DRAM size of CS num */
+MV_U32 mvDramCsSizeGet(MV_U32 csNum)
+{
+ MV_DRAM_BANK_INFO bankInfo;
+ MV_U32 size, deviceW, dimmW;
+#ifdef MV78XX0
+ MV_U32 temp;
+#endif
+
+ if(MV_OK == mvDramBankInfoGet(csNum, &bankInfo))
+ {
+ if (0 == bankInfo.size)
+ return 0;
+
+ /* Note that the Dimm width might be different then the device DRAM width */
+#ifdef MV78XX0
+ temp = MV_REG_READ(SDRAM_CONFIG_REG);
+ deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_32BIT )? 32 : 64;
+#else
+ deviceW = 16 /* KW family */;
+#endif
+ dimmW = bankInfo.dataWidth - (bankInfo.dataWidth % 16);
+ size = ((bankInfo.size << 20) / (dimmW/deviceW));
+ return size;
+ }
+ else
+ return 0;
+}
+/*******************************************************************************
+* mvDramIfDetect - Prepare DRAM interface configuration values.
+*
+* DESCRIPTION:
+* This function implements the full DRAM detection and timing
+* configuration for best system performance.
+* Since this routine runs from a ROM device (Boot Flash), its stack
+* resides on RAM, that might be the system DRAM. Changing DRAM
+* configuration values while keeping vital data in DRAM is risky. That
+* is why the function does not preform the configuration setting but
+* prepare those in predefined 32bit registers (in this case IDMA
+* registers are used) for other routine to perform the settings.
+* The function will call for board DRAM SPD information for each DRAM
+* chip select. The function will then analyze those SPD parameters of
+* all DRAM banks in order to decide on DRAM configuration compatible
+* for all DRAM banks.
+* The function will set the CPU DRAM address decode registers.
+* Note: This routine prepares values that will overide configuration of
+* mvDramBasicAsmInit().
+*
+* INPUT:
+* forcedCl - Forced CAL Latency. If equal to zero, do not force.
+* eccDisable - Force down the ECC.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvDramIfDetect(MV_U32 forcedCl, MV_BOOL eccDisable)
+{
+ MV_32 MV_DRAM_CS_order[MV_DRAM_MAX_CS] = {
+ SDRAM_CS0
+#ifdef MV_INCLUDE_SDRAM_CS1
+ ,SDRAM_CS1
+#endif
+#ifdef MV_INCLUDE_SDRAM_CS2
+ ,SDRAM_CS2
+#endif
+#ifdef MV_INCLUDE_SDRAM_CS3
+ ,SDRAM_CS3
+#endif
+ };
+ MV_U32 busClk, deviceW, dimmW;
+ MV_U32 numOfAllDevices = 0;
+ MV_STATUS TTMode;
+#ifndef MV_STATIC_DRAM_ON_BOARD
+ MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS];
+ MV_U32 size, base = 0, i, j, temp, busClkPs;
+ MV_U8 minCas;
+ MV_CPU_DEC_WIN dramDecWin;
+ dramDecWin.addrWin.baseHigh = 0;
+#endif
+
+ busClk = mvBoardSysClkGet();
+
+ if (0 == busClk)
+ {
+ mvOsPrintf("Dram: ERR. Can't detect system clock! \n");
+ return MV_ERROR;
+ }
+
+#ifndef MV_STATIC_DRAM_ON_BOARD
+
+ busClkPs = 1000000000 / (busClk / 1000); /* in ps units */
+ /* we will use bank 0 as the representative of the all the DRAM banks, */
+ /* since bank 0 must exist. */
+ for(i = 0; i < MV_DRAM_MAX_CS; i++)
+ {
+ /* if Bank exist */
+ if(MV_OK == mvDramBankInfoGet(i, &bankInfo[i]))
+ {
+ DB(mvOsPrintf("Dram: Find bank %d\n", i));
+ /* check it isn't SDRAM */
+ if(bankInfo[i].memoryType != MEM_TYPE_DDR2)
+ {
+ mvOsOutput("Dram: ERR. SDRAM type not supported !!!\n");
+ return MV_ERROR;
+ }
+
+ /* All banks must support the Mclk freqency */
+ if(bankInfo[i].minCycleTimeAtMaxCasLatPs > busClkPs)
+ {
+ mvOsOutput("Dram: ERR. Bank %d doesn't support memory clock!!!\n", i);
+ return MV_ERROR;
+ }
+
+ /* All banks must support registry in order to activate it */
+ if(bankInfo[i].registeredAddrAndControlInputs !=
+ bankInfo[0].registeredAddrAndControlInputs)
+ {
+ mvOsOutput("Dram: ERR. different Registered settings !!!\n");
+ return MV_ERROR;
+ }
+
+ /* All banks must support same ECC mode */
+ if(bankInfo[i].errorCheckType !=
+ bankInfo[0].errorCheckType)
+ {
+ mvOsOutput("Dram: ERR. different ECC settings !!!\n");
+ return MV_ERROR;
+ }
+
+ }
+ else
+ {
+ if( i == 0 ) /* bank 0 doesn't exist */
+ {
+ mvOsOutput("Dram: ERR. Fail to detect bank 0 !!!\n");
+ return MV_ERROR;
+ }
+ else
+ {
+ DB(mvOsPrintf("Dram: Could not find bank %d\n", i));
+ bankInfo[i].size = 0; /* Mark this bank as non exist */
+ }
+ }
+ }
+
+#ifdef MV_INCLUDE_SDRAM_CS2
+ if (bankInfo[SDRAM_CS0].size < bankInfo[SDRAM_CS2].size)
+ {
+ MV_DRAM_CS_order[0] = SDRAM_CS2;
+ MV_DRAM_CS_order[1] = SDRAM_CS3;
+ MV_DRAM_CS_order[2] = SDRAM_CS0;
+ MV_DRAM_CS_order[3] = SDRAM_CS1;
+ DRAM_CS_Order[0] = SDRAM_CS2;
+ DRAM_CS_Order[1] = SDRAM_CS3;
+ DRAM_CS_Order[2] = SDRAM_CS0;
+ DRAM_CS_Order[3] = SDRAM_CS1;
+
+ }
+ else
+#endif
+ {
+ MV_DRAM_CS_order[0] = SDRAM_CS0;
+ MV_DRAM_CS_order[1] = SDRAM_CS1;
+ DRAM_CS_Order[0] = SDRAM_CS0;
+ DRAM_CS_Order[1] = SDRAM_CS1;
+#ifdef MV_INCLUDE_SDRAM_CS2
+ MV_DRAM_CS_order[2] = SDRAM_CS2;
+ MV_DRAM_CS_order[3] = SDRAM_CS3;
+ DRAM_CS_Order[2] = SDRAM_CS2;
+ DRAM_CS_Order[3] = SDRAM_CS3;
+#endif
+ }
+
+ for(j = 0; j < MV_DRAM_MAX_CS; j++)
+ {
+ i = MV_DRAM_CS_order[j];
+
+ if (0 == bankInfo[i].size)
+ continue;
+
+ /* Init the CPU window decode */
+ /* Note that the Dimm width might be different then the device DRAM width */
+#ifdef MV78XX0
+ temp = MV_REG_READ(SDRAM_CONFIG_REG);
+ deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_32BIT )? 32 : 64;
+#else
+ deviceW = 16 /* KW family */;
+#endif
+ dimmW = bankInfo[0].dataWidth - (bankInfo[0].dataWidth % 16);
+ size = ((bankInfo[i].size << 20) / (dimmW/deviceW));
+
+ /* We can not change DRAM window settings while excecuting */
+ /* code from it. That is why we skip the DRAM CS[0], saving */
+ /* it to the ROM configuration routine */
+
+ numOfAllDevices += bankInfo[i].numberOfDevices;
+ if (i == MV_DRAM_CS_order[0])
+ {
+ MV_U32 sizeToReg;
+ /* Translate the given window size to register format */
+ sizeToReg = ctrlSizeToReg(size, SCSR_SIZE_ALIGNMENT);
+ /* Size parameter validity check. */
+ if (-1 == sizeToReg)
+ {
+ mvOsOutput("DRAM: mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n"
+ ,i);
+ return MV_BAD_PARAM;
+ }
+
+ DB(mvOsPrintf("Dram: Bank 0 Size - %x\n",sizeToReg);)
+ sizeToReg = (sizeToReg << SCSR_SIZE_OFFS);
+ sizeToReg |= SCSR_WIN_EN;
+ MV_REG_WRITE(DRAM_BUF_REG0, sizeToReg);
+ }
+ else
+ {
+ dramDecWin.addrWin.baseLow = base;
+ dramDecWin.addrWin.size = size;
+ dramDecWin.enable = MV_TRUE;
+ DB(mvOsPrintf("Dram: Enable window %d base 0x%x, size=0x%x\n",i, base, size));
+
+ /* Check if the DRAM size is more then 3GByte */
+ if (base < 0xC0000000)
+ {
+ DB(mvOsPrintf("Dram: Enable window %d base 0x%x, size=0x%x\n",i, base, size));
+ if (MV_OK != mvCpuIfTargetWinSet(i, &dramDecWin))
+ {
+ mvOsPrintf("Dram: ERR. Fail to set bank %d!!!\n", SDRAM_CS0 + i);
+ return MV_ERROR;
+ }
+ }
+ }
+
+ base += size;
+
+ /* update the suportedCasLatencies mask */
+ bankInfo[0].suportedCasLatencies &= bankInfo[i].suportedCasLatencies;
+ }
+
+ /* calculate minimum CAS */
+ minCas = minCasCalc(&bankInfo[0], &bankInfo[2], busClk, forcedCl);
+ if (0 == minCas)
+ {
+ mvOsOutput("Dram: Warn: Could not find CAS compatible to SysClk %dMhz\n",
+ (busClk / 1000000));
+
+ minCas = DDR2_CL_4; /* Continue with this CAS */
+ mvOsOutput("Set default CAS latency 4\n");
+ }
+
+ /* calc SDRAM_CONFIG_REG and save it to temp register */
+ temp = sdramConfigRegCalc(&bankInfo[0],&bankInfo[2], busClk);
+ if(-1 == temp)
+ {
+ mvOsOutput("Dram: ERR. sdramConfigRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+
+ /* check if ECC is enabled by the user */
+ if(eccDisable)
+ {
+ /* turn off ECC*/
+ temp &= ~BIT18;
+ }
+ DB(mvOsPrintf("Dram: sdramConfigRegCalc - %x\n",temp);)
+ MV_REG_WRITE(DRAM_BUF_REG1, temp);
+
+ /* calc SDRAM_MODE_REG and save it to temp register */
+ temp = sdramModeRegCalc(minCas);
+ if(-1 == temp)
+ {
+ mvOsOutput("Dram: ERR. sdramModeRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Dram: sdramModeRegCalc - %x\n",temp);)
+ MV_REG_WRITE(DRAM_BUF_REG2, temp);
+
+ /* calc SDRAM_EXTENDED_MODE_REG and save it to temp register */
+ temp = sdramExtModeRegCalc(&bankInfo[0], busClk);
+ if(-1 == temp)
+ {
+ mvOsOutput("Dram: ERR. sdramExtModeRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Dram: sdramExtModeRegCalc - %x\n",temp);)
+ MV_REG_WRITE(DRAM_BUF_REG10, temp);
+
+ /* calc D_UNIT_CONTROL_LOW and save it to temp register */
+ TTMode = MV_FALSE;
+ DB(mvOsPrintf("Dram: numOfAllDevices = %x\n",numOfAllDevices);)
+ if( (numOfAllDevices > 9) && (bankInfo[0].registeredAddrAndControlInputs == MV_FALSE) )
+ {
+ if ( ( (numOfAllDevices > 9) && (busClk > MV_BOARD_SYSCLK_200MHZ) ) ||
+ (numOfAllDevices > 18) )
+ {
+ mvOsOutput("Enable 2T ");
+ TTMode = MV_TRUE;
+ }
+ }
+
+ temp = dunitCtrlLowRegCalc(&bankInfo[0], minCas, busClk, TTMode );
+ if(-1 == temp)
+ {
+ mvOsOutput("Dram: ERR. dunitCtrlLowRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc - %x\n",temp);)
+ MV_REG_WRITE(DRAM_BUF_REG3, temp);
+
+ /* calc D_UNIT_CONTROL_HIGH and save it to temp register */
+ temp = dunitCtrlHighRegCalc(&bankInfo[0], busClk);
+ if(-1 == temp)
+ {
+ mvOsOutput("Dram: ERR. dunitCtrlHighRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Dram: dunitCtrlHighRegCalc - %x\n",temp);)
+ /* check if ECC is enabled by the user */
+ if(eccDisable)
+ {
+ /* turn off sample stage if no ecc */
+ temp &= ~SDRAM__D2P_EN;;
+ }
+ MV_REG_WRITE(DRAM_BUF_REG13, temp);
+
+ /* calc SDRAM_ADDR_CTRL_REG and save it to temp register */
+ temp = sdramAddrCtrlRegCalc(&bankInfo[0],&bankInfo[2]);
+ if(-1 == temp)
+ {
+ mvOsOutput("Dram: ERR. sdramAddrCtrlRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Dram: sdramAddrCtrlRegCalc - %x\n",temp);)
+ MV_REG_WRITE(DRAM_BUF_REG4, temp);
+
+ /* calc SDRAM_TIMING_CTRL_LOW_REG and save it to temp register */
+ temp = sdramTimeCtrlLowRegCalc(&bankInfo[0], minCas, busClk);
+ if(-1 == temp)
+ {
+ mvOsOutput("Dram: ERR. sdramTimeCtrlLowRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Dram: sdramTimeCtrlLowRegCalc - %x\n",temp);)
+ MV_REG_WRITE(DRAM_BUF_REG5, temp);
+
+ /* calc SDRAM_TIMING_CTRL_HIGH_REG and save it to temp register */
+ temp = sdramTimeCtrlHighRegCalc(&bankInfo[0], busClk);
+ if(-1 == temp)
+ {
+ mvOsOutput("Dram: ERR. sdramTimeCtrlHighRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Dram: sdramTimeCtrlHighRegCalc - %x\n",temp);)
+ MV_REG_WRITE(DRAM_BUF_REG6, temp);
+
+ sdramDDr2OdtConfig(bankInfo);
+
+ /* calc DDR2_SDRAM_TIMING_LOW_REG and save it to temp register */
+ temp = sdramDdr2TimeLoRegCalc(minCas);
+ if(-1 == temp)
+ {
+ mvOsOutput("Dram: ERR. sdramDdr2TimeLoRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Dram: sdramDdr2TimeLoRegCalc - %x\n",temp);)
+ MV_REG_WRITE(DRAM_BUF_REG11, temp);
+
+ /* calc DDR2_SDRAM_TIMING_HIGH_REG and save it to temp register */
+ temp = sdramDdr2TimeHiRegCalc(minCas);
+ if(-1 == temp)
+ {
+ mvOsOutput("Dram: ERR. sdramDdr2TimeHiRegCalc failed !!!\n");
+ return MV_ERROR;
+ }
+ DB(mvOsPrintf("Dram: sdramDdr2TimeHiRegCalc - %x\n",temp);)
+ MV_REG_WRITE(DRAM_BUF_REG12, temp);
+#endif
+
+ /* Note that DDR SDRAM Address/Control and Data pad calibration */
+ /* settings is done in mvSdramIfConfig.s */
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvDramIfBankBaseGet - Get DRAM interface bank base.
+*
+* DESCRIPTION:
+* This function returns the 32 bit base address of a given DRAM bank.
+*
+* INPUT:
+* bankNum - Bank number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* DRAM bank size. If bank is disabled or paramter is invalid, the
+* function returns -1.
+*
+*******************************************************************************/
+MV_U32 mvDramIfBankBaseGet(MV_U32 bankNum)
+{
+ DB(mvOsPrintf("Dram: mvDramIfBankBaseGet Bank %d base addr is %x \n",
+ bankNum, mvCpuIfTargetWinBaseLowGet(SDRAM_CS0 + bankNum)));
+ return mvCpuIfTargetWinBaseLowGet(SDRAM_CS0 + bankNum);
+}
+
+/*******************************************************************************
+* mvDramIfBankSizeGet - Get DRAM interface bank size.
+*
+* DESCRIPTION:
+* This function returns the size of a given DRAM bank.
+*
+* INPUT:
+* bankNum - Bank number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* DRAM bank size. If bank is disabled the function return '0'. In case
+* or paramter is invalid, the function returns -1.
+*
+*******************************************************************************/
+MV_U32 mvDramIfBankSizeGet(MV_U32 bankNum)
+{
+ DB(mvOsPrintf("Dram: mvDramIfBankSizeGet Bank %d size is %x \n",
+ bankNum, mvCpuIfTargetWinSizeGet(SDRAM_CS0 + bankNum)));
+ return mvCpuIfTargetWinSizeGet(SDRAM_CS0 + bankNum);
+}
+
+
+/*******************************************************************************
+* mvDramIfSizeGet - Get DRAM interface total size.
+*
+* DESCRIPTION:
+* This function get the DRAM total size.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* DRAM total size. In case or paramter is invalid, the function
+* returns -1.
+*
+*******************************************************************************/
+MV_U32 mvDramIfSizeGet(MV_VOID)
+{
+ MV_U32 size = 0, i;
+
+ for(i = 0; i < MV_DRAM_MAX_CS; i++)
+ size += mvDramIfBankSizeGet(i);
+
+ DB(mvOsPrintf("Dram: mvDramIfSizeGet size is %x \n",size));
+ return size;
+}
+
+/*******************************************************************************
+* mvDramIfSingleBitErrThresholdSet - Set single bit ECC threshold.
+*
+* DESCRIPTION:
+* The ECC single bit error threshold is the number of single bit
+* errors to happen before the Dunit generates an interrupt.
+* This function set single bit ECC threshold.
+*
+* INPUT:
+* threshold - threshold.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM if threshold is to big, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvDramIfSingleBitErrThresholdSet(MV_U32 threshold)
+{
+ MV_U32 regVal;
+
+ if (threshold > SECR_THRECC_MAX)
+ {
+ return MV_BAD_PARAM;
+ }
+
+ regVal = MV_REG_READ(SDRAM_ECC_CONTROL_REG);
+ regVal &= ~SECR_THRECC_MASK;
+ regVal |= ((SECR_THRECC(threshold) & SECR_THRECC_MASK));
+ MV_REG_WRITE(SDRAM_ECC_CONTROL_REG, regVal);
+
+ return MV_OK;
+}
+
+#ifndef MV_STATIC_DRAM_ON_BOARD
+/*******************************************************************************
+* minCasCalc - Calculate the Minimum CAS latency which can be used.
+*
+* DESCRIPTION:
+* Calculate the minimum CAS latency that can be used, base on the DRAM
+* parameters and the SDRAM bus Clock freq.
+*
+* INPUT:
+* busClk - the DRAM bus Clock.
+* pBankInfo - bank info parameters.
+* forcedCl - Forced CAS Latency multiplied by 10. If equal to zero, do not force.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* The minimum CAS Latency. The function returns 0 if max CAS latency
+* supported by banks is incompatible with system bus clock frequancy.
+*
+*******************************************************************************/
+
+static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk, MV_U32 forcedCl)
+{
+ MV_U32 count = 1, j;
+ MV_U32 busClkPs = 1000000000 / (busClk / 1000); /* in ps units */
+ MV_U32 startBit, stopBit;
+ MV_U32 minCas0 = 0, minCas2 = 0;
+
+
+ /* DDR 2:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD *
+ Disco VI= * TBD | TBD | 5 | 4 | 3 | TBD | TBD | TBD *
+ Disco Duo= * TBD | 6 | 5 | 4 | 3 | TBD | TBD | TBD *
+ *********************************************************/
+
+
+ /* If we are asked to use the forced CAL we change the suported CAL to be forcedCl only */
+ if (forcedCl)
+ {
+ mvOsOutput("DRAM: Using forced CL %d.%d\n", (forcedCl / 10), (forcedCl % 10));
+
+ if (forcedCl == 30)
+ pBankInfo->suportedCasLatencies = 0x08;
+ else if (forcedCl == 40)
+ pBankInfo->suportedCasLatencies = 0x10;
+ else if (forcedCl == 50)
+ pBankInfo->suportedCasLatencies = 0x20;
+ else if (forcedCl == 60)
+ pBankInfo->suportedCasLatencies = 0x40;
+ else
+ {
+ mvOsPrintf("Forced CL %d.%d not supported. Set default CL 4\n",
+ (forcedCl / 10), (forcedCl % 10));
+ pBankInfo->suportedCasLatencies = 0x10;
+ }
+
+ return pBankInfo->suportedCasLatencies;
+ }
+
+ /* go over the supported cas mask from Max Cas down and check if the */
+ /* SysClk stands in its time requirments. */
+
+ DB(mvOsPrintf("Dram: minCasCalc supported mask = %x busClkPs = %x \n",
+ pBankInfo->suportedCasLatencies,busClkPs ));
+ count = 1;
+ for(j = 7; j > 0; j--)
+ {
+ if((pBankInfo->suportedCasLatencies >> j) & BIT0 )
+ {
+ /* Reset the bits for CL incompatible for the sysClk */
+ switch (count)
+ {
+ case 1:
+ if (pBankInfo->minCycleTimeAtMaxCasLatPs > busClkPs)
+ pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+ count++;
+ break;
+ case 2:
+ if (pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs)
+ pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+ count++;
+ break;
+ case 3:
+ if (pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs)
+ pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+ count++;
+ break;
+ default:
+ pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+ break;
+ }
+ }
+ }
+
+ DB(mvOsPrintf("Dram: minCasCalc support = %x (after SysCC calc)\n",
+ pBankInfo->suportedCasLatencies ));
+
+ count = 1;
+ DB(mvOsPrintf("Dram2: minCasCalc supported mask = %x busClkPs = %x \n",
+ pBankInfo2->suportedCasLatencies,busClkPs ));
+ for(j = 7; j > 0; j--)
+ {
+ if((pBankInfo2->suportedCasLatencies >> j) & BIT0 )
+ {
+ /* Reset the bits for CL incompatible for the sysClk */
+ switch (count)
+ {
+ case 1:
+ if (pBankInfo2->minCycleTimeAtMaxCasLatPs > busClkPs)
+ pBankInfo2->suportedCasLatencies &= ~(BIT0 << j);
+ count++;
+ break;
+ case 2:
+ if (pBankInfo2->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs)
+ pBankInfo2->suportedCasLatencies &= ~(BIT0 << j);
+ count++;
+ break;
+ case 3:
+ if (pBankInfo2->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs)
+ pBankInfo2->suportedCasLatencies &= ~(BIT0 << j);
+ count++;
+ break;
+ default:
+ pBankInfo2->suportedCasLatencies &= ~(BIT0 << j);
+ break;
+ }
+ }
+ }
+
+ DB(mvOsPrintf("Dram2: minCasCalc support = %x (after SysCC calc)\n",
+ pBankInfo2->suportedCasLatencies ));
+
+ startBit = 3; /* DDR2 support CL start with CL3 (bit 3) */
+ stopBit = 6; /* DDR2 support CL stops with CL6 (bit 6) */
+
+ for(j = startBit; j <= stopBit ; j++)
+ {
+ if((pBankInfo->suportedCasLatencies >> j) & BIT0 )
+ {
+ DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j)));
+ minCas0 = (BIT0 << j);
+ break;
+ }
+ }
+
+ for(j = startBit; j <= stopBit ; j++)
+ {
+ if((pBankInfo2->suportedCasLatencies >> j) & BIT0 )
+ {
+ DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j)));
+ minCas2 = (BIT0 << j);
+ break;
+ }
+ }
+
+ if (minCas2 > minCas0)
+ return minCas2;
+ else
+ return minCas0;
+
+ return 0;
+}
+
+/*******************************************************************************
+* sdramConfigRegCalc - Calculate sdram config register
+*
+* DESCRIPTION: Calculate sdram config register optimized value based
+* on the bank info parameters.
+*
+* INPUT:
+* busClk - the DRAM bus Clock.
+* pBankInfo - sdram bank parameters
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram config reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk)
+{
+ MV_U32 sdramConfig = 0;
+ MV_U32 refreshPeriod;
+
+ busClk /= 1000000; /* we work with busClk in MHz */
+
+ sdramConfig = MV_REG_READ(SDRAM_CONFIG_REG);
+
+ /* figure out the memory refresh internal */
+ switch (pBankInfo->refreshInterval & 0xf)
+ {
+ case 0x0: /* refresh period is 15.625 usec */
+ refreshPeriod = 15625;
+ break;
+ case 0x1: /* refresh period is 3.9 usec */
+ refreshPeriod = 3900;
+ break;
+ case 0x2: /* refresh period is 7.8 usec */
+ refreshPeriod = 7800;
+ break;
+ case 0x3: /* refresh period is 31.3 usec */
+ refreshPeriod = 31300;
+ break;
+ case 0x4: /* refresh period is 62.5 usec */
+ refreshPeriod = 62500;
+ break;
+ case 0x5: /* refresh period is 125 usec */
+ refreshPeriod = 125000;
+ break;
+ default: /* refresh period undefined */
+ mvOsPrintf("Dram: ERR. DRAM refresh period is unknown!\n");
+ return -1;
+ }
+
+ /* Now the refreshPeriod is in register format value */
+ refreshPeriod = (busClk * refreshPeriod) / 1000;
+
+ DB(mvOsPrintf("Dram: sdramConfigRegCalc calculated refresh interval %0x\n",
+ refreshPeriod));
+
+ /* make sure the refresh value is only 14 bits */
+ if(refreshPeriod > SDRAM_REFRESH_MAX)
+ {
+ refreshPeriod = SDRAM_REFRESH_MAX;
+ DB(mvOsPrintf("Dram: sdramConfigRegCalc adjusted refresh interval %0x\n",
+ refreshPeriod));
+ }
+
+ /* Clear the refresh field */
+ sdramConfig &= ~SDRAM_REFRESH_MASK;
+
+ /* Set new value to refresh field */
+ sdramConfig |= (refreshPeriod & SDRAM_REFRESH_MASK);
+
+ /* registered DRAM ? */
+ if ( pBankInfo->registeredAddrAndControlInputs )
+ {
+ /* it's registered DRAM, so set the reg. DRAM bit */
+ sdramConfig |= SDRAM_REGISTERED;
+ DB(mvOsPrintf("DRAM Attribute: Registered address and control inputs.\n");)
+ }
+
+ /* ECC and IERR support */
+ sdramConfig &= ~SDRAM_ECC_MASK; /* Clear ECC field */
+ sdramConfig &= ~SDRAM_IERR_MASK; /* Clear IErr field */
+
+ if ( pBankInfo->errorCheckType )
+ {
+ sdramConfig |= SDRAM_ECC_EN;
+ sdramConfig |= SDRAM_IERR_REPORTE;
+ DB(mvOsPrintf("Dram: mvDramIfDetect Enabling ECC\n"));
+ }
+ else
+ {
+ sdramConfig |= SDRAM_ECC_DIS;
+ sdramConfig |= SDRAM_IERR_IGNORE;
+ DB(mvOsPrintf("Dram: mvDramIfDetect Disabling ECC!\n"));
+ }
+ /* Set static default settings */
+ sdramConfig |= SDRAM_CONFIG_DV;
+
+ DB(mvOsPrintf("Dram: sdramConfigRegCalc set sdramConfig to 0x%x\n",
+ sdramConfig));
+
+ return sdramConfig;
+}
+
+/*******************************************************************************
+* sdramModeRegCalc - Calculate sdram mode register
+*
+* DESCRIPTION: Calculate sdram mode register optimized value based
+* on the bank info parameters and the minCas.
+*
+* INPUT:
+* minCas - minimum CAS supported.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram mode reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramModeRegCalc(MV_U32 minCas)
+{
+ MV_U32 sdramMode;
+
+ sdramMode = MV_REG_READ(SDRAM_MODE_REG);
+
+ /* Clear CAS Latency field */
+ sdramMode &= ~SDRAM_CL_MASK;
+
+ DB(mvOsPrintf("DRAM CAS Latency ");)
+
+ switch (minCas)
+ {
+ case DDR2_CL_3:
+ sdramMode |= SDRAM_DDR2_CL_3;
+ DB(mvOsPrintf("3.\n");)
+ break;
+ case DDR2_CL_4:
+ sdramMode |= SDRAM_DDR2_CL_4;
+ DB(mvOsPrintf("4.\n");)
+ break;
+ case DDR2_CL_5:
+ sdramMode |= SDRAM_DDR2_CL_5;
+ DB(mvOsPrintf("5.\n");)
+ break;
+ case DDR2_CL_6:
+ sdramMode |= SDRAM_DDR2_CL_6;
+ DB(mvOsPrintf("6.\n");)
+ break;
+ default:
+ mvOsOutput("\nsdramModeRegCalc ERROR: Max. CL out of range\n");
+ return -1;
+ }
+
+ DB(mvOsPrintf("\nsdramModeRegCalc register 0x%x\n", sdramMode ));
+
+ return sdramMode;
+}
+/*******************************************************************************
+* sdramExtModeRegCalc - Calculate sdram Extended mode register
+*
+* DESCRIPTION:
+* Return sdram Extended mode register value based
+* on the bank info parameters and bank presence.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+* busClk - DRAM frequency
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram Extended mode reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk)
+{
+ MV_U32 populateBanks = 0;
+ int bankNum;
+
+ /* Represent the populate banks in binary form */
+ for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ if (0 != pBankInfo[bankNum].size)
+ {
+ populateBanks |= (1 << bankNum);
+ }
+ }
+
+ switch(populateBanks)
+ {
+ case(BANK_PRESENT_CS0):
+ case(BANK_PRESENT_CS0_CS1):
+ return DDR_SDRAM_EXT_MODE_CS0_CS1_DV;
+
+ case(BANK_PRESENT_CS0_CS2):
+ case(BANK_PRESENT_CS0_CS1_CS2):
+ case(BANK_PRESENT_CS0_CS2_CS3):
+ case(BANK_PRESENT_CS0_CS2_CS3_CS4):
+ if (busClk >= MV_BOARD_SYSCLK_267MHZ)
+ return DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV;
+ else
+ return DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV;
+
+ default:
+ mvOsOutput("sdramExtModeRegCalc: Invalid DRAM bank presence\n");
+ return -1;
+ }
+ return 0;
+}
+
+/*******************************************************************************
+* dunitCtrlLowRegCalc - Calculate sdram dunit control low register
+*
+* DESCRIPTION: Calculate sdram dunit control low register optimized value based
+* on the bank info parameters and the minCas.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+* minCas - minimum CAS supported.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram dunit control low reg value.
+*
+*******************************************************************************/
+static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk, MV_STATUS TTMode)
+{
+ MV_U32 dunitCtrlLow, cl;
+ MV_U32 sbOutR[4]={3,5,7,9} ;
+ MV_U32 sbOutU[4]={1,3,5,7} ;
+
+ dunitCtrlLow = MV_REG_READ(SDRAM_DUNIT_CTRL_REG);
+
+ DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc\n"));
+
+ /* Clear StBurstOutDel field */
+ dunitCtrlLow &= ~SDRAM_SB_OUT_MASK;
+
+ /* Clear StBurstInDel field */
+ dunitCtrlLow &= ~SDRAM_SB_IN_MASK;
+
+ /* Clear CtrlPos field */
+ dunitCtrlLow &= ~SDRAM_CTRL_POS_MASK;
+
+ /* Clear 2T field */
+ dunitCtrlLow &= ~SDRAM_2T_MASK;
+ if (TTMode == MV_TRUE)
+ {
+ dunitCtrlLow |= SDRAM_2T_MODE;
+ }
+
+ /* For proper sample of read data set the Dunit Control register's */
+ /* stBurstInDel bits [27:24] */
+ /* 200MHz - 267MHz None reg = CL + 1 */
+ /* 200MHz - 267MHz reg = CL + 2 */
+ /* > 267MHz None reg = CL + 2 */
+ /* > 267MHz reg = CL + 3 */
+
+ /* For proper sample of read data set the Dunit Control register's */
+ /* stBurstOutDel bits [23:20] */
+ /********-********-********-********-
+ * CL=3 | CL=4 | CL=5 | CL=6 |
+ *********-********-********-********-
+ Not Reg. * 0001 | 0011 | 0101 | 0111 |
+ *********-********-********-********-
+ Registered * 0011 | 0101 | 0111 | 1001 |
+ *********-********-********-********/
+
+ /* Set Dunit Control low default value */
+ dunitCtrlLow |= SDRAM_DUNIT_CTRL_LOW_DDR2_DV;
+
+ switch (minCas)
+ {
+ case DDR2_CL_3: cl = 3; break;
+ case DDR2_CL_4: cl = 4; break;
+ case DDR2_CL_5: cl = 5; break;
+ case DDR2_CL_6: cl = 6; break;
+ default:
+ mvOsOutput("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", minCas);
+ return -1;
+ }
+
+ /* registerd DDR SDRAM? */
+ if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+ {
+ dunitCtrlLow |= (sbOutR[cl-3]) << SDRAM_SB_OUT_DEL_OFFS;
+ }
+ else
+ {
+ dunitCtrlLow |= (sbOutU[cl-3]) << SDRAM_SB_OUT_DEL_OFFS;
+ }
+
+ DB(mvOsPrintf("\n\ndunitCtrlLowRegCalc: CL = %d, frequencies=%d\n", cl, busClk));
+
+ if (busClk <= MV_BOARD_SYSCLK_267MHZ)
+ {
+ if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+ cl = cl + 2;
+ else
+ cl = cl + 1;
+ }
+ else
+ {
+ if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+ cl = cl + 3;
+ else
+ cl = cl + 2;
+ }
+
+ DB(mvOsPrintf("dunitCtrlLowRegCalc: SDRAM_SB_IN_DEL_OFFS = %d \n", cl));
+ dunitCtrlLow |= cl << SDRAM_SB_IN_DEL_OFFS;
+
+ DB(mvOsPrintf("Dram: Reg dunit control low = %x\n", dunitCtrlLow ));
+
+ return dunitCtrlLow;
+}
+
+/*******************************************************************************
+* dunitCtrlHighRegCalc - Calculate sdram dunit control high register
+*
+* DESCRIPTION: Calculate sdram dunit control high register optimized value based
+* on the bus clock.
+*
+* INPUT:
+* busClk - DRAM frequency.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram dunit control high reg value.
+*
+*******************************************************************************/
+static MV_U32 dunitCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk)
+{
+ MV_U32 dunitCtrlHigh;
+ dunitCtrlHigh = MV_REG_READ(SDRAM_DUNIT_CTRL_HI_REG);
+ if(busClk > MV_BOARD_SYSCLK_300MHZ)
+ dunitCtrlHigh |= SDRAM__P2D_EN;
+ else
+ dunitCtrlHigh &= ~SDRAM__P2D_EN;
+
+ if(busClk > MV_BOARD_SYSCLK_267MHZ)
+ dunitCtrlHigh |= (SDRAM__WR_MESH_DELAY_EN | SDRAM__PUP_ZERO_SKEW_EN | SDRAM__ADD_HALF_FCC_EN);
+
+ /* If ECC support we turn on D2P sample */
+ dunitCtrlHigh &= ~SDRAM__D2P_EN; /* Clear D2P bit */
+ if (( pBankInfo->errorCheckType ) && (busClk > MV_BOARD_SYSCLK_267MHZ))
+ dunitCtrlHigh |= SDRAM__D2P_EN;
+
+ return dunitCtrlHigh;
+}
+
+/*******************************************************************************
+* sdramAddrCtrlRegCalc - Calculate sdram address control register
+*
+* DESCRIPTION: Calculate sdram address control register optimized value based
+* on the bank info parameters and the minCas.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram address control reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfoDIMM1)
+{
+ MV_U32 addrCtrl = 0;
+
+ if (pBankInfoDIMM1->size)
+ {
+ switch (pBankInfoDIMM1->sdramWidth)
+ {
+ case 4: /* memory is x4 */
+ mvOsOutput("sdramAddrCtrlRegCalc: Error - x4 not supported!\n");
+ return -1;
+ break;
+ case 8: /* memory is x8 */
+ addrCtrl |= SDRAM_ADDRSEL_X8(2) | SDRAM_ADDRSEL_X8(3);
+ DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device DIMM2 width x8\n"));
+ break;
+ case 16:
+ addrCtrl |= SDRAM_ADDRSEL_X16(2) | SDRAM_ADDRSEL_X16(3);
+ DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device DIMM2 width x16\n"));
+ break;
+ default: /* memory width unsupported */
+ mvOsOutput("sdramAddrCtrlRegCalc: ERR. DRAM chip width is unknown!\n");
+ return -1;
+ }
+ }
+
+ switch (pBankInfo->sdramWidth)
+ {
+ case 4: /* memory is x4 */
+ mvOsOutput("sdramAddrCtrlRegCalc: Error - x4 not supported!\n");
+ return -1;
+ break;
+ case 8: /* memory is x8 */
+ addrCtrl |= SDRAM_ADDRSEL_X8(0) | SDRAM_ADDRSEL_X8(1);
+ DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device width x8\n"));
+ break;
+ case 16:
+ addrCtrl |= SDRAM_ADDRSEL_X16(0) | SDRAM_ADDRSEL_X16(1);
+ DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device width x16\n"));
+ break;
+ default: /* memory width unsupported */
+ mvOsOutput("sdramAddrCtrlRegCalc: ERR. DRAM chip width is unknown!\n");
+ return -1;
+ }
+
+ /* Note that density is in MB units */
+ switch (pBankInfo->deviceDensity)
+ {
+ case 256: /* 256 Mbit */
+ DB(mvOsPrintf("DRAM Device Density 256Mbit\n"));
+ addrCtrl |= SDRAM_DSIZE_256Mb(0) | SDRAM_DSIZE_256Mb(1);
+ break;
+ case 512: /* 512 Mbit */
+ DB(mvOsPrintf("DRAM Device Density 512Mbit\n"));
+ addrCtrl |= SDRAM_DSIZE_512Mb(0) | SDRAM_DSIZE_512Mb(1);
+ break;
+ case 1024: /* 1 Gbit */
+ DB(mvOsPrintf("DRAM Device Density 1Gbit\n"));
+ addrCtrl |= SDRAM_DSIZE_1Gb(0) | SDRAM_DSIZE_1Gb(1);
+ break;
+ case 2048: /* 2 Gbit */
+ DB(mvOsPrintf("DRAM Device Density 2Gbit\n"));
+ addrCtrl |= SDRAM_DSIZE_2Gb(0) | SDRAM_DSIZE_2Gb(1);
+ break;
+ default:
+ mvOsOutput("Dram: sdramAddrCtrl unsupported RAM-Device size %d\n",
+ pBankInfo->deviceDensity);
+ return -1;
+ }
+
+ if (pBankInfoDIMM1->size)
+ {
+ switch (pBankInfoDIMM1->deviceDensity)
+ {
+ case 256: /* 256 Mbit */
+ DB(mvOsPrintf("DIMM2: DRAM Device Density 256Mbit\n"));
+ addrCtrl |= SDRAM_DSIZE_256Mb(2) | SDRAM_DSIZE_256Mb(3);
+ break;
+ case 512: /* 512 Mbit */
+ DB(mvOsPrintf("DIMM2: DRAM Device Density 512Mbit\n"));
+ addrCtrl |= SDRAM_DSIZE_512Mb(2) | SDRAM_DSIZE_512Mb(3);
+ break;
+ case 1024: /* 1 Gbit */
+ DB(mvOsPrintf("DIMM2: DRAM Device Density 1Gbit\n"));
+ addrCtrl |= SDRAM_DSIZE_1Gb(2) | SDRAM_DSIZE_1Gb(3);
+ break;
+ case 2048: /* 2 Gbit */
+ DB(mvOsPrintf("DIMM2: DRAM Device Density 2Gbit\n"));
+ addrCtrl |= SDRAM_DSIZE_2Gb(2) | SDRAM_DSIZE_2Gb(3);
+ break;
+ default:
+ mvOsOutput("DIMM2: Dram: sdramAddrCtrl unsupported RAM-Device size %d\n",
+ pBankInfoDIMM1->deviceDensity);
+ return -1;
+ }
+ }
+ /* SDRAM address control */
+ DB(mvOsPrintf("Dram: setting sdram address control with: %x \n", addrCtrl));
+
+ return addrCtrl;
+}
+
+/*******************************************************************************
+* sdramTimeCtrlLowRegCalc - Calculate sdram timing control low register
+*
+* DESCRIPTION:
+* This function calculates sdram timing control low register
+* optimized value based on the bank info parameters and the minCas.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+* minCas - minimum CAS supported.
+* busClk - Bus clock
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram timing control low reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk)
+{
+ MV_U32 tRp = 0;
+ MV_U32 tRrd = 0;
+ MV_U32 tRcd = 0;
+ MV_U32 tRas = 0;
+ MV_U32 tWr = 0;
+ MV_U32 tWtr = 0;
+ MV_U32 tRtp = 0;
+ MV_U32 timeCtrlLow = 0;
+
+ MV_U32 bankNum;
+
+ busClk = busClk / 1000000; /* In MHz */
+
+ /* Scan all DRAM banks to find maximum timing values */
+ for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ tRp = MV_MAX(tRp, pBankInfo[bankNum].minRowPrechargeTime);
+ tRrd = MV_MAX(tRrd, pBankInfo[bankNum].minRowActiveToRowActive);
+ tRcd = MV_MAX(tRcd, pBankInfo[bankNum].minRasToCasDelay);
+ tRas = MV_MAX(tRas, pBankInfo[bankNum].minRasPulseWidth);
+ }
+
+ /* Extract timing (in ns) from SPD value. We ignore the tenth ns part. */
+ /* by shifting the data two bits right. */
+ tRp = tRp >> 2; /* For example 0x50 -> 20ns */
+ tRrd = tRrd >> 2;
+ tRcd = tRcd >> 2;
+
+ /* Extract clock cycles from time parameter. We need to round up */
+ tRp = ((busClk * tRp) / 1000) + (((busClk * tRp) % 1000) ? 1 : 0);
+ DB(mvOsPrintf("Dram Timing Low: tRp = %d ", tRp));
+ tRrd = ((busClk * tRrd) / 1000) + (((busClk * tRrd) % 1000) ? 1 : 0);
+ /* JEDEC min reqeirments tRrd = 2 */
+ if (tRrd < 2)
+ tRrd = 2;
+ DB(mvOsPrintf("tRrd = %d ", tRrd));
+ tRcd = ((busClk * tRcd) / 1000) + (((busClk * tRcd) % 1000) ? 1 : 0);
+ DB(mvOsPrintf("tRcd = %d ", tRcd));
+ tRas = ((busClk * tRas) / 1000) + (((busClk * tRas) % 1000) ? 1 : 0);
+ DB(mvOsPrintf("tRas = %d ", tRas));
+
+ /* tWr and tWtr is different for DDR1 and DDR2. tRtp is only for DDR2 */
+ /* Scan all DRAM banks to find maximum timing values */
+ for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ tWr = MV_MAX(tWr, pBankInfo[bankNum].minWriteRecoveryTime);
+ tWtr = MV_MAX(tWtr, pBankInfo[bankNum].minWriteToReadCmdDelay);
+ tRtp = MV_MAX(tRtp, pBankInfo[bankNum].minReadToPrechCmdDelay);
+ }
+
+ /* Extract timing (in ns) from SPD value. We ignore the tenth ns */
+ /* part by shifting the data two bits right. */
+ tWr = tWr >> 2; /* For example 0x50 -> 20ns */
+ tWtr = tWtr >> 2;
+ tRtp = tRtp >> 2;
+ /* Extract clock cycles from time parameter. We need to round up */
+ tWr = ((busClk * tWr) / 1000) + (((busClk * tWr) % 1000) ? 1 : 0);
+ DB(mvOsPrintf("tWr = %d ", tWr));
+ tWtr = ((busClk * tWtr) / 1000) + (((busClk * tWtr) % 1000) ? 1 : 0);
+ /* JEDEC min reqeirments tWtr = 2 */
+ if (tWtr < 2)
+ tWtr = 2;
+ DB(mvOsPrintf("tWtr = %d ", tWtr));
+ tRtp = ((busClk * tRtp) / 1000) + (((busClk * tRtp) % 1000) ? 1 : 0);
+ /* JEDEC min reqeirments tRtp = 2 */
+ if (tRtp < 2)
+ tRtp = 2;
+ DB(mvOsPrintf("tRtp = %d ", tRtp));
+
+ /* Note: value of 0 in register means one cycle, 1 means two and so on */
+ timeCtrlLow = (((tRp - 1) << SDRAM_TRP_OFFS) |
+ ((tRrd - 1) << SDRAM_TRRD_OFFS) |
+ ((tRcd - 1) << SDRAM_TRCD_OFFS) |
+ (((tRas - 1) << SDRAM_TRAS_OFFS) & SDRAM_TRAS_MASK)|
+ ((tWr - 1) << SDRAM_TWR_OFFS) |
+ ((tWtr - 1) << SDRAM_TWTR_OFFS) |
+ ((tRtp - 1) << SDRAM_TRTP_OFFS));
+
+ /* Check extended tRas bit */
+ if ((tRas - 1) & BIT4)
+ timeCtrlLow |= (1 << SDRAM_EXT_TRAS_OFFS);
+
+ return timeCtrlLow;
+}
+
+/*******************************************************************************
+* sdramTimeCtrlHighRegCalc - Calculate sdram timing control high register
+*
+* DESCRIPTION:
+* This function calculates sdram timing control high register
+* optimized value based on the bank info parameters and the bus clock.
+*
+* INPUT:
+* pBankInfo - sdram bank parameters
+* busClk - Bus clock
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* sdram timing control high reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk)
+{
+ MV_U32 tRfc;
+ MV_U32 timingHigh;
+ MV_U32 timeNs = 0;
+ MV_U32 bankNum;
+
+ busClk = busClk / 1000000; /* In MHz */
+
+ /* Set DDR timing high register static configuration bits */
+ timingHigh = MV_REG_READ(SDRAM_TIMING_CTRL_HIGH_REG);
+
+ /* Set DDR timing high register default value */
+ timingHigh |= SDRAM_TIMING_CTRL_HIGH_REG_DV;
+
+ /* Clear tRfc field */
+ timingHigh &= ~SDRAM_TRFC_MASK;
+
+ /* Scan all DRAM banks to find maximum timing values */
+ for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ timeNs = MV_MAX(timeNs, pBankInfo[bankNum].minRefreshToActiveCmd);
+ DB(mvOsPrintf("Dram: Timing High: minRefreshToActiveCmd = %d\n",
+ pBankInfo[bankNum].minRefreshToActiveCmd));
+ }
+ if(busClk >= 333 && mvCtrlModelGet() == MV_78XX0_A1_REV)
+ {
+ timingHigh |= 0x1 << SDRAM_TR2W_W2R_OFFS;
+ }
+
+ tRfc = ((busClk * timeNs) / 1000) + (((busClk * timeNs) % 1000) ? 1 : 0);
+ /* Note: value of 0 in register means one cycle, 1 means two and so on */
+ DB(mvOsPrintf("Dram: Timing High: tRfc = %d\n", tRfc));
+ timingHigh |= (((tRfc - 1) & SDRAM_TRFC_MASK) << SDRAM_TRFC_OFFS);
+ DB(mvOsPrintf("Dram: Timing High: tRfc = %d\n", tRfc));
+
+ /* SDRAM timing high */
+ DB(mvOsPrintf("Dram: setting timing high with: %x \n", timingHigh));
+
+ return timingHigh;
+}
+/*******************************************************************************
+* sdramDDr2OdtConfig - Set DRAM DDR2 On Die Termination registers.
+*
+* DESCRIPTION:
+* This function config DDR2 On Die Termination (ODT) registers.
+*
+* INPUT:
+* pBankInfo - bank info parameters.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* None
+*******************************************************************************/
+static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo)
+{
+ MV_U32 populateBanks = 0;
+ MV_U32 odtCtrlLow, odtCtrlHigh, dunitOdtCtrl;
+ int bankNum;
+
+ /* Represent the populate banks in binary form */
+ for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+ {
+ if (0 != pBankInfo[bankNum].size)
+ {
+ populateBanks |= (1 << bankNum);
+ }
+ }
+
+ switch(populateBanks)
+ {
+ case(BANK_PRESENT_CS0):
+ case(BANK_PRESENT_CS0_CS1):
+ odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS1_DV;
+ odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS1_DV;
+ dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV;
+ break;
+ case(BANK_PRESENT_CS0_CS2):
+ case(BANK_PRESENT_CS0_CS1_CS2):
+ case(BANK_PRESENT_CS0_CS2_CS3):
+ case(BANK_PRESENT_CS0_CS2_CS3_CS4):
+ odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV;
+ odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS1_CS2_CS3_DV;
+ dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV;
+ break;
+ default:
+ DB(mvOsPrintf("sdramDDr2OdtConfig: Invalid DRAM bank presence\n"));
+ return;
+ }
+ /* DDR2 SDRAM ODT ctrl low */
+ DB(mvOsPrintf("Dram: DDR2 setting ODT ctrl low with: %x \n", odtCtrlLow));
+ MV_REG_WRITE(DRAM_BUF_REG7, odtCtrlLow);
+
+ /* DDR2 SDRAM ODT ctrl high */
+ DB(mvOsPrintf("Dram: DDR2 setting ODT ctrl high with: %x \n", odtCtrlHigh));
+ MV_REG_WRITE(DRAM_BUF_REG8, odtCtrlHigh);
+
+ /* DDR2 DUNIT ODT ctrl */
+ if ( ((mvCtrlModelGet() == MV_78XX0_DEV_ID) && (mvCtrlRevGet() == MV_78XX0_Y0_REV)) ||
+ (mvCtrlModelGet() == MV_76100_DEV_ID) ||
+ (mvCtrlModelGet() == MV_78100_DEV_ID) ||
+ (mvCtrlModelGet() == MV_78200_DEV_ID) )
+ dunitOdtCtrl &= ~(BIT9|BIT8); /* Clear ODT always on */
+
+ DB(mvOsPrintf("DUNIT: DDR2 setting ODT ctrl with: %x \n", dunitOdtCtrl));
+ MV_REG_WRITE(DRAM_BUF_REG9, dunitOdtCtrl);
+ return;
+}
+/*******************************************************************************
+* sdramDdr2TimeLoRegCalc - Set DDR2 DRAM Timing Low registers.
+*
+* DESCRIPTION:
+* This function config DDR2 DRAM Timing low registers.
+*
+* INPUT:
+* minCas - minimum CAS supported.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* DDR2 sdram timing low reg value.
+*******************************************************************************/
+static MV_U32 sdramDdr2TimeLoRegCalc(MV_U32 minCas)
+{
+ MV_U8 cl = -1;
+ MV_U32 ddr2TimeLoReg;
+
+ /* read and clear the feilds we are going to set */
+ ddr2TimeLoReg = MV_REG_READ(SDRAM_DDR2_TIMING_LO_REG);
+ ddr2TimeLoReg &= ~(SD2TLR_TODT_ON_RD_MASK |
+ SD2TLR_TODT_OFF_RD_MASK |
+ SD2TLR_TODT_ON_CTRL_RD_MASK |
+ SD2TLR_TODT_OFF_CTRL_RD_MASK);
+
+ if( minCas == DDR2_CL_3 )
+ {
+ cl = 3;
+ }
+ else if( minCas == DDR2_CL_4 )
+ {
+ cl = 4;
+ }
+ else if( minCas == DDR2_CL_5 )
+ {
+ cl = 5;
+ }
+ else if( minCas == DDR2_CL_6 )
+ {
+ cl = 6;
+ }
+ else
+ {
+ DB(mvOsPrintf("sdramDdr2TimeLoRegCalc: CAS latency %d unsupported. using CAS latency 4\n",
+ minCas));
+ cl = 4;
+ }
+
+ ddr2TimeLoReg |= ((cl-3) << SD2TLR_TODT_ON_RD_OFFS);
+ ddr2TimeLoReg |= ( cl << SD2TLR_TODT_OFF_RD_OFFS);
+ ddr2TimeLoReg |= ( cl << SD2TLR_TODT_ON_CTRL_RD_OFFS);
+ ddr2TimeLoReg |= ((cl+3) << SD2TLR_TODT_OFF_CTRL_RD_OFFS);
+
+ /* DDR2 SDRAM timing low */
+ DB(mvOsPrintf("Dram: DDR2 setting timing low with: %x \n", ddr2TimeLoReg));
+
+ return ddr2TimeLoReg;
+}
+
+/*******************************************************************************
+* sdramDdr2TimeHiRegCalc - Set DDR2 DRAM Timing High registers.
+*
+* DESCRIPTION:
+* This function config DDR2 DRAM Timing high registers.
+*
+* INPUT:
+* minCas - minimum CAS supported.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* DDR2 sdram timing high reg value.
+*******************************************************************************/
+static MV_U32 sdramDdr2TimeHiRegCalc(MV_U32 minCas)
+{
+ MV_U8 cl = -1;
+ MV_U32 ddr2TimeHiReg;
+
+ /* read and clear the feilds we are going to set */
+ ddr2TimeHiReg = MV_REG_READ(SDRAM_DDR2_TIMING_HI_REG);
+ ddr2TimeHiReg &= ~(SD2THR_TODT_ON_WR_MASK |
+ SD2THR_TODT_OFF_WR_MASK |
+ SD2THR_TODT_ON_CTRL_WR_MASK |
+ SD2THR_TODT_OFF_CTRL_WR_MASK);
+
+ if( minCas == DDR2_CL_3 )
+ {
+ cl = 3;
+ }
+ else if( minCas == DDR2_CL_4 )
+ {
+ cl = 4;
+ }
+ else if( minCas == DDR2_CL_5 )
+ {
+ cl = 5;
+ }
+ else if( minCas == DDR2_CL_6 )
+ {
+ cl = 6;
+ }
+ else
+ {
+ mvOsOutput("sdramDdr2TimeHiRegCalc: CAS latency %d unsupported. using CAS latency 4\n",
+ minCas);
+ cl = 4;
+ }
+
+ ddr2TimeHiReg |= ((cl-3) << SD2THR_TODT_ON_WR_OFFS);
+ ddr2TimeHiReg |= ( cl << SD2THR_TODT_OFF_WR_OFFS);
+ ddr2TimeHiReg |= ( cl << SD2THR_TODT_ON_CTRL_WR_OFFS);
+ ddr2TimeHiReg |= ((cl+3) << SD2THR_TODT_OFF_CTRL_WR_OFFS);
+
+ /* DDR2 SDRAM timin high */
+ DB(mvOsPrintf("Dram: DDR2 setting timing high with: %x \n", ddr2TimeHiReg));
+
+ return ddr2TimeHiReg;
+}
+#endif
+
+/*******************************************************************************
+* mvDramIfCalGet - Get CAS Latency
+*
+* DESCRIPTION:
+* This function get the CAS Latency.
+*
+* INPUT:
+* None
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* CAS latency times 10 (to avoid using floating point).
+*
+*******************************************************************************/
+MV_U32 mvDramIfCalGet(void)
+{
+ MV_U32 sdramCasLat, casLatMask;
+
+ casLatMask = (MV_REG_READ(SDRAM_MODE_REG) & SDRAM_CL_MASK);
+
+ switch (casLatMask)
+ {
+ case SDRAM_DDR2_CL_3:
+ sdramCasLat = 30;
+ break;
+ case SDRAM_DDR2_CL_4:
+ sdramCasLat = 40;
+ break;
+ case SDRAM_DDR2_CL_5:
+ sdramCasLat = 50;
+ break;
+ case SDRAM_DDR2_CL_6:
+ sdramCasLat = 60;
+ break;
+ default:
+ mvOsOutput("mvDramIfCalGet: Err, unknown DDR2 CAL\n");
+ return -1;
+ }
+
+ return sdramCasLat;
+}
+
+
+/*******************************************************************************
+* mvDramIfSelfRefreshSet - Put the dram in self refresh mode -
+*
+* DESCRIPTION:
+* add support in power management.
+*
+*
+* INPUT:
+* None
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* None
+*
+*******************************************************************************/
+
+MV_VOID mvDramIfSelfRefreshSet()
+{
+ MV_U32 operReg;
+
+ operReg = MV_REG_READ(SDRAM_OPERATION_REG);
+ MV_REG_WRITE(SDRAM_OPERATION_REG ,operReg |SDRAM_CMD_SLF_RFRSH);
+ /* Read until register is reset to 0 */
+ while(MV_REG_READ(SDRAM_OPERATION_REG));
+}
+/*******************************************************************************
+* mvDramIfDimGetSPDversion - return DIMM SPD version.
+*
+* DESCRIPTION:
+* This function prints the DRAM controller information.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static void mvDramIfDimGetSPDversion(MV_U32 *pMajor, MV_U32 *pMinor, MV_U32 bankNum)
+{
+ MV_DIMM_INFO dimmInfo;
+ if (bankNum >= MV_DRAM_MAX_CS )
+ {
+ DB(mvOsPrintf("Dram: mvDramIfDimGetSPDversion bad params \n"));
+ return ;
+ }
+ memset(&dimmInfo,0,sizeof(dimmInfo));
+ if ( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo))
+ {
+ DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n"));
+ return ;
+ }
+ *pMajor = dimmInfo.spdRawData[DIMM_SPD_VERSION]/10;
+ *pMinor = dimmInfo.spdRawData[DIMM_SPD_VERSION]%10;
+}
+/*******************************************************************************
+* mvDramIfShow - Show DRAM controller information.
+*
+* DESCRIPTION:
+* This function prints the DRAM controller information.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+void mvDramIfShow(void)
+{
+ int i, sdramCasLat, sdramCsSize;
+ MV_U32 Major=0, Minor=0;
+
+ mvOsOutput("DRAM Controller info:\n");
+
+ mvOsOutput("Total DRAM ");
+ mvSizePrint(mvDramIfSizeGet());
+ mvOsOutput("\n");
+
+ for(i = 0; i < MV_DRAM_MAX_CS; i++)
+ {
+ sdramCsSize = mvDramIfBankSizeGet(i);
+ if (sdramCsSize)
+ {
+ if (0 == (i & 1))
+ {
+ mvDramIfDimGetSPDversion(&Major, &Minor,i);
+ mvOsOutput("DIMM %d version %d.%d\n", i/2, Major, Minor);
+ }
+ mvOsOutput("\tDRAM CS[%d] ", i);
+ mvSizePrint(sdramCsSize);
+ mvOsOutput("\n");
+ }
+ }
+ sdramCasLat = mvDramIfCalGet();
+
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_ECC_EN)
+ {
+ mvOsOutput("ECC enabled, ");
+ }
+ else
+ {
+ mvOsOutput("ECC Disabled, ");
+ }
+
+ if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_REGISTERED)
+ {
+ mvOsOutput("Registered DIMM\n");
+ }
+ else
+ {
+ mvOsOutput("Non registered DIMM\n");
+ }
+
+ mvOsOutput("Configured CAS Latency %d.%d\n", sdramCasLat/10, sdramCasLat%10);
+}
+/*******************************************************************************
+* mvDramIfGetFirstCS - find the DRAM bank on the lower address
+*
+*
+* DESCRIPTION:
+* This function return the fisrt CS on address 0
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* SDRAM_CS0 or SDRAM_CS2
+*
+*******************************************************************************/
+MV_U32 mvDramIfGetFirstCS(void)
+{
+ MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS];
+
+ if (DRAM_CS_Order[0] == N_A)
+ {
+ mvDramBankInfoGet(SDRAM_CS0, &bankInfo[SDRAM_CS0]);
+#ifdef MV_INCLUDE_SDRAM_CS2
+ mvDramBankInfoGet(SDRAM_CS2, &bankInfo[SDRAM_CS2]);
+#endif
+
+#ifdef MV_INCLUDE_SDRAM_CS2
+ if (bankInfo[SDRAM_CS0].size < bankInfo[SDRAM_CS2].size)
+ {
+ DRAM_CS_Order[0] = SDRAM_CS2;
+ DRAM_CS_Order[1] = SDRAM_CS3;
+ DRAM_CS_Order[2] = SDRAM_CS0;
+ DRAM_CS_Order[3] = SDRAM_CS1;
+
+ return SDRAM_CS2;
+ }
+#endif
+ DRAM_CS_Order[0] = SDRAM_CS0;
+ DRAM_CS_Order[1] = SDRAM_CS1;
+#ifdef MV_INCLUDE_SDRAM_CS2
+ DRAM_CS_Order[2] = SDRAM_CS2;
+ DRAM_CS_Order[3] = SDRAM_CS3;
+#endif
+ return SDRAM_CS0;
+ }
+ return DRAM_CS_Order[0];
+}
+/*******************************************************************************
+* mvDramIfGetCSorder -
+*
+*
+* DESCRIPTION:
+* This function return the fisrt CS on address 0
+*
+* INPUT:
+* CS number.
+*
+* OUTPUT:
+* CS order.
+*
+* RETURN:
+* SDRAM_CS0 or SDRAM_CS2
+*
+* NOTE: mvDramIfGetFirstCS must be caled before this subroutine
+*******************************************************************************/
+MV_U32 mvDramIfGetCSorder(MV_U32 csOrder )
+{
+ return DRAM_CS_Order[csOrder];
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvDramIfh
+#define __INCmvDramIfh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* includes */
+#include "ddr2/mvDramIfRegs.h"
+#include "ddr2/mvDramIfConfig.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* defines */
+/* DRAM Timing parameters */
+#define SDRAM_TWR 15 /* ns tWr */
+#define SDRAM_TRFC_64_512M_AT_200MHZ 70 /* ns tRfc for dens 64-512 @ 200MHz */
+#define SDRAM_TRFC_64_512M 75 /* ns tRfc for dens 64-512 */
+#define SDRAM_TRFC_1G 120 /* ns tRfc for dens 1GB */
+#define SDRAM_TR2R_CYC 1 /* cycle for tR2r */
+
+#define CAL_AUTO_DETECT 0 /* Do not force CAS latancy (mvDramIfDetect) */
+#define ECC_DISABLE 1 /* Force ECC to Disable */
+#define ECC_ENABLE 0 /* Force ECC to ENABLE */
+/* typedefs */
+
+/* enumeration for memory types */
+typedef enum _mvMemoryType
+{
+ MEM_TYPE_SDRAM,
+ MEM_TYPE_DDR1,
+ MEM_TYPE_DDR2
+}MV_MEMORY_TYPE;
+
+/* enumeration for DDR2 supported CAS Latencies */
+typedef enum _mvDimmDdr2Cas
+{
+ DDR2_CL_3 = 0x08,
+ DDR2_CL_4 = 0x10,
+ DDR2_CL_5 = 0x20,
+ DDR2_CL_6 = 0x40,
+ DDR2_CL_FAULT
+} MV_DIMM_DDR2_CAS;
+
+
+typedef struct _mvDramBankInfo
+{
+ MV_MEMORY_TYPE memoryType; /* DDR1, DDR2 or SDRAM */
+
+ /* DIMM dimensions */
+ MV_U32 numOfRowAddr;
+ MV_U32 numOfColAddr;
+ MV_U32 dataWidth;
+ MV_U32 errorCheckType; /* ECC , PARITY..*/
+ MV_U32 sdramWidth; /* 4,8,16 or 32 */
+ MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */
+ MV_U32 burstLengthSupported;
+ MV_U32 numOfBanksOnEachDevice;
+ MV_U32 suportedCasLatencies;
+ MV_U32 refreshInterval;
+
+ /* DIMM timing parameters */
+ MV_U32 minCycleTimeAtMaxCasLatPs;
+ MV_U32 minCycleTimeAtMaxCasLatMinus1Ps;
+ MV_U32 minCycleTimeAtMaxCasLatMinus2Ps;
+ MV_U32 minRowPrechargeTime;
+ MV_U32 minRowActiveToRowActive;
+ MV_U32 minRasToCasDelay;
+ MV_U32 minRasPulseWidth;
+ MV_U32 minWriteRecoveryTime; /* DDR2 only */
+ MV_U32 minWriteToReadCmdDelay; /* DDR2 only */
+ MV_U32 minReadToPrechCmdDelay; /* DDR2 only */
+ MV_U32 minRefreshToActiveCmd; /* DDR2 only */
+
+ /* Parameters calculated from the extracted DIMM information */
+ MV_U32 size;
+ MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit */
+ MV_U32 numberOfDevices;
+
+ /* DIMM attributes (MV_TRUE for yes) */
+ MV_BOOL registeredAddrAndControlInputs;
+ MV_BOOL registeredDQMBinputs;
+
+}MV_DRAM_BANK_INFO;
+
+#include "ddr2/spd/mvSpd.h"
+
+/* mvDramIf.h API list */
+MV_VOID mvDramIfBasicAsmInit(MV_VOID);
+MV_STATUS mvDramIfDetect(MV_U32 forcedCl, MV_BOOL eccDisable);
+MV_VOID _mvDramIfConfig(int entryNum);
+
+MV_U32 mvDramIfBankSizeGet(MV_U32 bankNum);
+MV_U32 mvDramIfBankBaseGet(MV_U32 bankNum);
+MV_U32 mvDramIfSizeGet(MV_VOID);
+MV_U32 mvDramIfCalGet(void);
+MV_STATUS mvDramIfSingleBitErrThresholdSet(MV_U32 threshold);
+MV_VOID mvDramIfSelfRefreshSet(void);
+void mvDramIfShow(void);
+MV_U32 mvDramIfGetFirstCS(void);
+MV_U32 mvDramIfGetCSorder(MV_U32 csOrder );
+MV_U32 mvDramCsSizeGet(MV_U32 csNum);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvDramIfh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvDramIfConfigh
+#define __INCmvDramIfConfigh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* includes */
+
+/* defines */
+
+/* registers defaults values */
+
+#define SDRAM_CONFIG_DV (SDRAM_SRMODE_DRAM | BIT25 | BIT30)
+
+#define SDRAM_DUNIT_CTRL_LOW_DDR2_DV \
+ (SDRAM_SRCLK_KEPT | \
+ SDRAM_CLK1DRV_NORMAL | \
+ (BIT28 | BIT29))
+
+#define SDRAM_ADDR_CTRL_DV 2
+
+#define SDRAM_TIMING_CTRL_LOW_REG_DV \
+ ((0x2 << SDRAM_TRCD_OFFS) | \
+ (0x2 << SDRAM_TRP_OFFS) | \
+ (0x1 << SDRAM_TWR_OFFS) | \
+ (0x0 << SDRAM_TWTR_OFFS) | \
+ (0x5 << SDRAM_TRAS_OFFS) | \
+ (0x1 << SDRAM_TRRD_OFFS))
+
+/* Note: value of 0 in register means one cycle, 1 means two and so on */
+#define SDRAM_TIMING_CTRL_HIGH_REG_DV \
+ ((0x0 << SDRAM_TR2R_OFFS) | \
+ (0x0 << SDRAM_TR2W_W2R_OFFS) | \
+ (0x1 << SDRAM_TW2W_OFFS))
+
+#define SDRAM_OPEN_PAGES_CTRL_REG_DV SDRAM_OPEN_PAGE_EN
+
+/* Presence Ctrl Low Ctrl High Dunit Ctrl Ext Mode */
+/* CS0 0x84210000 0x00000000 0x0000780F 0x00000440 */
+/* CS0+CS1 0x84210000 0x00000000 0x0000780F 0x00000440 */
+/* CS0+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */
+/* CS0+CS1+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */
+/* CS0+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */
+/* CS0+CS1+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */
+
+#define DDR2_ODT_CTRL_LOW_CS0_CS1_DV 0x84210000
+#define DDR2_ODT_CTRL_HIGH_CS0_CS1_DV 0x00000000
+#define DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV 0x0000E80F
+#ifdef MV78XX0
+#define DDR_SDRAM_EXT_MODE_CS0_CS1_DV 0x00000040
+#else
+#define DDR_SDRAM_EXT_MODE_CS0_CS1_DV 0x00000440
+#endif
+
+#define DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV 0x030C030C
+#define DDR2_ODT_CTRL_HIGH_CS0_CS1_CS2_CS3_DV 0x00000000
+#define DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV 0x0000F40F
+#ifdef MV78XX0
+#define DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV 0x00000004
+#define DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV 0x00000044
+#else
+#define DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV 0x00000404
+#define DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV 0x00000444
+#endif
+
+/* DDR SDRAM Adderss/Control and Data Pads Calibration default values */
+#define DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV \
+ (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+
+#define DDR2_DATA_PAD_STRENGTH_TYPICAL_DV \
+ (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+
+/* DDR SDRAM Mode Register default value */
+#define DDR2_MODE_REG_DV (SDRAM_BURST_LEN_4 | SDRAM_WR_3_CYC)
+/* DDR SDRAM Timing parameter default values */
+#define SDRAM_TIMING_CTRL_LOW_REG_DEFAULT 0x33136552
+#define SDRAM_TRFC_DEFAULT_VALUE 0x34
+#define SDRAM_TRFC_DEFAULT SDRAM_TRFC_DEFAULT_VALUE
+#define SDRAM_TW2W_DEFALT (0x1 << SDRAM_TW2W_OFFS)
+
+#define SDRAM_TIMING_CTRL_HIGH_REG_DEFAULT (SDRAM_TRFC_DEFAULT | SDRAM_TW2W_DEFALT)
+
+#define SDRAM_FTDLL_REG_DEFAULT_LEFT 0x88C800
+#define SDRAM_FTDLL_REG_DEFAULT_RIGHT 0x88C800
+#define SDRAM_FTDLL_REG_DEFAULT_UP 0x88C800
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvDramIfh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDramIfRegsh
+#define __INCmvDramIfRegsh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* DDR SDRAM Controller Address Decode Registers */
+ /* SDRAM CSn Base Address Register (SCBAR) */
+#define SDRAM_BASE_ADDR_REG(cpu,csNum) (0x1500 + ((csNum) * 8) + ((cpu) * 0x70))
+#define SCBAR_BASE_OFFS 16
+#define SCBAR_BASE_MASK (0xffff << SCBAR_BASE_OFFS)
+#define SCBAR_BASE_ALIGNMENT 0x10000
+
+/* SDRAM CSn Size Register (SCSR) */
+#define SDRAM_SIZE_REG(cpu,csNum) (0x1504 + ((csNum) * 8) + ((cpu) * 0x70))
+#define SCSR_SIZE_OFFS 24
+#define SCSR_SIZE_MASK (0xff << SCSR_SIZE_OFFS)
+#define SCSR_SIZE_ALIGNMENT 0x1000000
+#define SCSR_WIN_EN BIT0
+
+/* configuration register */
+#define SDRAM_CONFIG_REG (DRAM_BASE + 0x1400)
+#define SDRAM_REFRESH_OFFS 0
+#define SDRAM_REFRESH_MAX 0x3FFF
+#define SDRAM_REFRESH_MASK (SDRAM_REFRESH_MAX << SDRAM_REFRESH_OFFS)
+#define SDRAM_DWIDTH_OFFS 15
+#define SDRAM_DWIDTH_MASK (1 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_DWIDTH_32BIT (0 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_DWIDTH_64BIT (1 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_REGISTERED (1 << 17)
+#define SDRAM_ECC_OFFS 18
+#define SDRAM_ECC_MASK (1 << SDRAM_ECC_OFFS)
+#define SDRAM_ECC_DIS (0 << SDRAM_ECC_OFFS)
+#define SDRAM_ECC_EN (1 << SDRAM_ECC_OFFS)
+#define SDRAM_IERR_OFFS 19
+#define SDRAM_IERR_MASK (1 << SDRAM_IERR_OFFS)
+#define SDRAM_IERR_REPORTE (0 << SDRAM_IERR_OFFS)
+#define SDRAM_IERR_IGNORE (1 << SDRAM_IERR_OFFS)
+#define SDRAM_SRMODE_OFFS 24
+#define SDRAM_SRMODE_MASK (1 << SDRAM_SRMODE_OFFS)
+#define SDRAM_SRMODE_POWER (0 << SDRAM_SRMODE_OFFS)
+#define SDRAM_SRMODE_DRAM (1 << SDRAM_SRMODE_OFFS)
+
+/* dunit control low register */
+#define SDRAM_DUNIT_CTRL_REG (DRAM_BASE + 0x1404)
+#define SDRAM_2T_OFFS 4
+#define SDRAM_2T_MASK (1 << SDRAM_2T_OFFS)
+#define SDRAM_2T_MODE (1 << SDRAM_2T_OFFS)
+
+#define SDRAM_SRCLK_OFFS 5
+#define SDRAM_SRCLK_MASK (1 << SDRAM_SRCLK_OFFS)
+#define SDRAM_SRCLK_KEPT (0 << SDRAM_SRCLK_OFFS)
+#define SDRAM_SRCLK_GATED (1 << SDRAM_SRCLK_OFFS)
+#define SDRAM_CTRL_POS_OFFS 6
+#define SDRAM_CTRL_POS_MASK (1 << SDRAM_CTRL_POS_OFFS)
+#define SDRAM_CTRL_POS_FALL (0 << SDRAM_CTRL_POS_OFFS)
+#define SDRAM_CTRL_POS_RISE (1 << SDRAM_CTRL_POS_OFFS)
+#define SDRAM_CLK1DRV_OFFS 12
+#define SDRAM_CLK1DRV_MASK (1 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_CLK1DRV_HIGH_Z (0 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_CLK1DRV_NORMAL (1 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_CLK2DRV_OFFS 13
+#define SDRAM_CLK2DRV_MASK (1 << SDRAM_CLK2DRV_OFFS)
+#define SDRAM_CLK2DRV_HIGH_Z (0 << SDRAM_CLK2DRV_OFFS)
+#define SDRAM_CLK2DRV_NORMAL (1 << SDRAM_CLK2DRV_OFFS)
+#define SDRAM_SB_OUT_DEL_OFFS 20
+#define SDRAM_SB_OUT_DEL_MAX 0xf
+#define SDRAM_SB_OUT_MASK (SDRAM_SB_OUT_DEL_MAX<<SDRAM_SB_OUT_DEL_OFFS)
+#define SDRAM_SB_IN_DEL_OFFS 24
+#define SDRAM_SB_IN_DEL_MAX 0xf
+#define SDRAM_SB_IN_MASK (SDRAM_SB_IN_DEL_MAX<<SDRAM_SB_IN_DEL_OFFS)
+
+/* dunit control hight register */
+#define SDRAM_DUNIT_CTRL_HI_REG (DRAM_BASE + 0x1424)
+#define SDRAM__D2P_OFFS 7
+#define SDRAM__D2P_EN (1 << SDRAM__D2P_OFFS)
+#define SDRAM__P2D_OFFS 8
+#define SDRAM__P2D_EN (1 << SDRAM__P2D_OFFS)
+#define SDRAM__ADD_HALF_FCC_OFFS 9
+#define SDRAM__ADD_HALF_FCC_EN (1 << SDRAM__ADD_HALF_FCC_OFFS)
+#define SDRAM__PUP_ZERO_SKEW_OFFS 10
+#define SDRAM__PUP_ZERO_SKEW_EN (1 << SDRAM__PUP_ZERO_SKEW_OFFS)
+#define SDRAM__WR_MESH_DELAY_OFFS 11
+#define SDRAM__WR_MESH_DELAY_EN (1 << SDRAM__WR_MESH_DELAY_OFFS)
+
+/* sdram timing control low register */
+#define SDRAM_TIMING_CTRL_LOW_REG (DRAM_BASE + 0x1408)
+#define SDRAM_TRCD_OFFS 4
+#define SDRAM_TRCD_MASK (0xF << SDRAM_TRCD_OFFS)
+#define SDRAM_TRP_OFFS 8
+#define SDRAM_TRP_MASK (0xF << SDRAM_TRP_OFFS)
+#define SDRAM_TWR_OFFS 12
+#define SDRAM_TWR_MASK (0xF << SDRAM_TWR_OFFS)
+#define SDRAM_TWTR_OFFS 16
+#define SDRAM_TWTR_MASK (0xF << SDRAM_TWTR_OFFS)
+#define SDRAM_TRAS_OFFS 0
+#define SDRAM_TRAS_MASK (0xF << SDRAM_TRAS_OFFS)
+#define SDRAM_EXT_TRAS_OFFS 20
+#define SDRAM_EXT_TRAS_MASK (0x1 << SDRAM_EXT_TRAS_OFFS)
+#define SDRAM_TRRD_OFFS 24
+#define SDRAM_TRRD_MASK (0xF << SDRAM_TRRD_OFFS)
+#define SDRAM_TRTP_OFFS 28
+#define SDRAM_TRTP_MASK (0xF << SDRAM_TRTP_OFFS)
+#define SDRAM_TRTP_DDR1 (0x1 << SDRAM_TRTP_OFFS)
+
+/* sdram timing control high register */
+#define SDRAM_TIMING_CTRL_HIGH_REG (DRAM_BASE + 0x140c)
+#define SDRAM_TRFC_OFFS 0
+#define SDRAM_TRFC_MASK (0x3F << SDRAM_TRFC_OFFS)
+#define SDRAM_TR2R_OFFS 7
+#define SDRAM_TR2R_MASK (0x3 << SDRAM_TR2R_OFFS)
+#define SDRAM_TR2W_W2R_OFFS 9
+#define SDRAM_TR2W_W2R_MASK (0x3 << SDRAM_TR2W_W2R_OFFS)
+#define SDRAM_TW2W_OFFS 11
+#define SDRAM_TW2W_MASK (0x3 << SDRAM_TW2W_OFFS)
+
+/* sdram DDR2 timing low register (SD2TLR) */
+#define SDRAM_DDR2_TIMING_LO_REG (DRAM_BASE + 0x1428)
+#define SD2TLR_TODT_ON_RD_OFFS 4
+#define SD2TLR_TODT_ON_RD_MASK (0xF << SD2TLR_TODT_ON_RD_OFFS)
+#define SD2TLR_TODT_OFF_RD_OFFS 8
+#define SD2TLR_TODT_OFF_RD_MASK (0xF << SD2TLR_TODT_OFF_RD_OFFS)
+#define SD2TLR_TODT_ON_CTRL_RD_OFFS 12
+#define SD2TLR_TODT_ON_CTRL_RD_MASK (0xF << SD2TLR_TODT_ON_CTRL_RD_OFFS)
+#define SD2TLR_TODT_OFF_CTRL_RD_OFFS 16
+#define SD2TLR_TODT_OFF_CTRL_RD_MASK (0xF << SD2TLR_TODT_OFF_CTRL_RD_OFFS)
+
+/* sdram DDR2 timing high register (SD2TLR) */
+#define SDRAM_DDR2_TIMING_HI_REG (DRAM_BASE + 0x147C)
+#define SD2THR_TODT_ON_WR_OFFS 0
+#define SD2THR_TODT_ON_WR_MASK (0xF << SD2THR_TODT_ON_WR_OFFS)
+#define SD2THR_TODT_OFF_WR_OFFS 4
+#define SD2THR_TODT_OFF_WR_MASK (0xF << SD2THR_TODT_OFF_WR_OFFS)
+#define SD2THR_TODT_ON_CTRL_WR_OFFS 8
+#define SD2THR_TODT_ON_CTRL_WR_MASK (0xF << SD2THR_TODT_ON_CTRL_WR_OFFS)
+#define SD2THR_TODT_OFF_CTRL_WR_OFFS 12
+#define SD2THR_TODT_OFF_CTRL_WR_MASK (0xF << SD2THR_TODT_OFF_CTRL_WR_OFFS)
+
+/* address control register */
+#define SDRAM_ADDR_CTRL_REG (DRAM_BASE + 0x1410)
+#define SDRAM_ADDRSEL_OFFS(cs) (4 * (cs))
+#define SDRAM_ADDRSEL_MASK(cs) (0x3 << SDRAM_ADDRSEL_OFFS(cs))
+#define SDRAM_ADDRSEL_X8(cs) (0x0 << SDRAM_ADDRSEL_OFFS(cs))
+#define SDRAM_ADDRSEL_X16(cs) (0x1 << SDRAM_ADDRSEL_OFFS(cs))
+#define SDRAM_DSIZE_OFFS(cs) (2 + 4 * (cs))
+#define SDRAM_DSIZE_MASK(cs) (0x3 << SDRAM_DSIZE_OFFS(cs))
+#define SDRAM_DSIZE_256Mb(cs) (0x1 << SDRAM_DSIZE_OFFS(cs))
+#define SDRAM_DSIZE_512Mb(cs) (0x2 << SDRAM_DSIZE_OFFS(cs))
+#define SDRAM_DSIZE_1Gb(cs) (0x3 << SDRAM_DSIZE_OFFS(cs))
+#define SDRAM_DSIZE_2Gb(cs) (0x0 << SDRAM_DSIZE_OFFS(cs))
+
+/* SDRAM Open Pages Control registers */
+#define SDRAM_OPEN_PAGE_CTRL_REG (DRAM_BASE + 0x1414)
+#define SDRAM_OPEN_PAGE_EN (0 << 0)
+#define SDRAM_OPEN_PAGE_DIS (1 << 0)
+
+/* sdram opertion register */
+#define SDRAM_OPERATION_REG (DRAM_BASE + 0x1418)
+#define SDRAM_CMD_OFFS 0
+#define SDRAM_CMD_MASK (0xF << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_NORMAL (0x0 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_PRECHARGE_ALL (0x1 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_REFRESH_ALL (0x2 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_REG_SET_CMD (0x3 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EXT_MODE_SET (0x4 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_NOP (0x5 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_SLF_RFRSH (0x7 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EMRS2_CMD (0x8 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EMRS3_CMD (0x9 << SDRAM_CMD_OFFS)
+
+/* sdram mode register */
+#define SDRAM_MODE_REG (DRAM_BASE + 0x141c)
+#define SDRAM_BURST_LEN_OFFS 0
+#define SDRAM_BURST_LEN_MASK (0x7 << SDRAM_BURST_LEN_OFFS)
+#define SDRAM_BURST_LEN_4 (0x2 << SDRAM_BURST_LEN_OFFS)
+#define SDRAM_CL_OFFS 4
+#define SDRAM_CL_MASK (0x7 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_3 (0x3 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_4 (0x4 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_5 (0x5 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_6 (0x6 << SDRAM_CL_OFFS)
+
+#define SDRAM_TM_OFFS 7
+#define SDRAM_TM_MASK (1 << SDRAM_TM_OFFS)
+#define SDRAM_TM_NORMAL (0 << SDRAM_TM_OFFS)
+#define SDRAM_TM_TEST_MODE (1 << SDRAM_TM_OFFS)
+#define SDRAM_DLL_OFFS 8
+#define SDRAM_DLL_MASK (1 << SDRAM_DLL_OFFS)
+#define SDRAM_DLL_NORMAL (0 << SDRAM_DLL_OFFS)
+#define SDRAM_DLL_RESET (1 << SDRAM_DLL_OFFS)
+#define SDRAM_WR_OFFS 9
+#define SDRAM_WR_MAX 7
+#define SDRAM_WR_MASK (SDRAM_WR_MAX << SDRAM_WR_OFFS)
+#define SDRAM_WR_2_CYC (1 << SDRAM_WR_OFFS)
+#define SDRAM_WR_3_CYC (2 << SDRAM_WR_OFFS)
+#define SDRAM_WR_4_CYC (3 << SDRAM_WR_OFFS)
+#define SDRAM_WR_5_CYC (4 << SDRAM_WR_OFFS)
+#define SDRAM_WR_6_CYC (5 << SDRAM_WR_OFFS)
+#define SDRAM_PD_OFFS 12
+#define SDRAM_PD_MASK (1 << SDRAM_PD_OFFS)
+#define SDRAM_PD_FAST_EXIT (0 << SDRAM_PD_OFFS)
+#define SDRAM_PD_SLOW_EXIT (1 << SDRAM_PD_OFFS)
+
+/* DDR SDRAM Extended Mode register (DSEMR) */
+#define SDRAM_EXTENDED_MODE_REG (DRAM_BASE + 0x1420)
+#define DSEMR_DLL_ENABLE 0
+#define DSEMR_DLL_DISABLE 1
+#define DSEMR_DS_OFFS 1
+#define DSEMR_DS_MASK (1 << DSEMR_DS_OFFS)
+#define DSEMR_DS_NORMAL (0 << DSEMR_DS_OFFS)
+#define DSEMR_DS_REDUCED (1 << DSEMR_DS_OFFS)
+#define DSEMR_QOFF_OUTPUT_BUFF_EN (0 << 12)
+#define DSEMR_RTT0_OFFS 2
+#define DSEMR_RTT1_OFFS 6
+#define DSEMR_RTT_ODT_DISABLE ((0 << DSEMR_RTT0_OFFS)||(0 << DSEMR_RTT1_OFFS))
+#define DSEMR_RTT_ODT_75_OHM ((1 << DSEMR_RTT0_OFFS)||(0 << DSEMR_RTT1_OFFS))
+#define DSEMR_RTT_ODT_150_OHM ((0 << DSEMR_RTT0_OFFS)||(1 << DSEMR_RTT1_OFFS))
+#define DSEMR_RTT_ODT_50_OHM ((1 << DSEMR_RTT0_OFFS)||(1 << DSEMR_RTT1_OFFS))
+#define DSEMR_DQS_OFFS 10
+#define DSEMR_DQS_MASK (1 << DSEMR_DQS_OFFS)
+#define DSEMR_DQS_DIFFERENTIAL (0 << DSEMR_DQS_OFFS)
+#define DSEMR_DQS_SINGLE_ENDED (1 << DSEMR_DQS_OFFS)
+#define DSEMR_RDQS_ENABLE (1 << 11)
+#define DSEMR_QOFF_OUTPUT_BUFF_EN (0 << 12)
+#define DSEMR_QOFF_OUTPUT_BUFF_DIS (1 << 12)
+
+/* DDR SDRAM Operation Control Register */
+#define SDRAM_OPERATION_CTRL_REG (DRAM_BASE + 0x142c)
+
+/* Dunit FTDLL Configuration Register */
+#define SDRAM_FTDLL_CONFIG_LEFT_REG (DRAM_BASE + 0x1484)
+#define SDRAM_FTDLL_CONFIG_RIGHT_REG (DRAM_BASE + 0x161C)
+#define SDRAM_FTDLL_CONFIG_UP_REG (DRAM_BASE + 0x1620)
+
+/* Pads Calibration register */
+#define SDRAM_ADDR_CTRL_PADS_CAL_REG (DRAM_BASE + 0x14c0)
+#define SDRAM_DATA_PADS_CAL_REG (DRAM_BASE + 0x14c4)
+#define SDRAM_DRVN_OFFS 0
+#define SDRAM_DRVN_MASK (0x3F << SDRAM_DRVN_OFFS)
+#define SDRAM_DRVP_OFFS 6
+#define SDRAM_DRVP_MASK (0x3F << SDRAM_DRVP_OFFS)
+#define SDRAM_PRE_DRIVER_STRENGTH_OFFS 12
+#define SDRAM_PRE_DRIVER_STRENGTH_MASK (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+#define SDRAM_TUNE_EN BIT16
+#define SDRAM_LOCKN_OFFS 17
+#define SDRAM_LOCKN_MAKS (0x3F << SDRAM_LOCKN_OFFS)
+#define SDRAM_LOCKP_OFFS 23
+#define SDRAM_LOCKP_MAKS (0x3F << SDRAM_LOCKP_OFFS)
+#define SDRAM_WR_EN (1 << 31)
+
+/* DDR2 SDRAM ODT Control (Low) Register (DSOCLR) */
+#define DDR2_SDRAM_ODT_CTRL_LOW_REG (DRAM_BASE + 0x1494)
+#define DSOCLR_ODT_RD_OFFS(odtNum) (odtNum * 4)
+#define DSOCLR_ODT_RD_MASK(odtNum) (0xf << DSOCLR_ODT_RD_OFFS(odtNum))
+#define DSOCLR_ODT_RD(odtNum, bank) ((1 << bank) << DSOCLR_ODT_RD_OFFS(odtNum))
+#define DSOCLR_ODT_WR_OFFS(odtNum) (16 + (odtNum * 4))
+#define DSOCLR_ODT_WR_MASK(odtNum) (0xf << DSOCLR_ODT_WR_OFFS(odtNum))
+#define DSOCLR_ODT_WR(odtNum, bank) ((1 << bank) << DSOCLR_ODT_WR_OFFS(odtNum))
+
+/* DDR2 SDRAM ODT Control (High) Register (DSOCHR) */
+#define DDR2_SDRAM_ODT_CTRL_HIGH_REG (DRAM_BASE + 0x1498)
+/* Optional control values to DSOCHR_ODT_EN macro */
+#define DDR2_ODT_CTRL_DUNIT 0
+#define DDR2_ODT_CTRL_NEVER 1
+#define DDR2_ODT_CTRL_ALWAYS 3
+#define DSOCHR_ODT_EN_OFFS(odtNum) (odtNum * 2)
+#define DSOCHR_ODT_EN_MASK(odtNum) (0x3 << DSOCHR_ODT_EN_OFFS(odtNum))
+#define DSOCHR_ODT_EN(odtNum, ctrl) (ctrl << DSOCHR_ODT_EN_OFFS(odtNum))
+
+/* DDR2 Dunit ODT Control Register (DDOCR)*/
+#define DDR2_DUNIT_ODT_CONTROL_REG (DRAM_BASE + 0x149c)
+#define DDOCR_ODT_RD_OFFS 0
+#define DDOCR_ODT_RD_MASK (0xf << DDOCR_ODT_RD_OFFS)
+#define DDOCR_ODT_RD(bank) ((1 << bank) << DDOCR_ODT_RD_OFFS)
+#define DDOCR_ODT_WR_OFFS 4
+#define DDOCR_ODT_WR_MASK (0xf << DDOCR_ODT_WR_OFFS)
+#define DDOCR_ODT_WR(bank) ((1 << bank) << DDOCR_ODT_WR_OFFS)
+#define DSOCR_ODT_EN_OFFS 8
+#define DSOCR_ODT_EN_MASK (0x3 << DSOCR_ODT_EN_OFFS)
+/* For ctrl parameters see DDR2 SDRAM ODT Control (High) Register (0x1498) above. */
+#define DSOCR_ODT_EN(ctrl) (ctrl << DSOCR_ODT_EN_OFFS)
+#define DSOCR_ODT_SEL_DISABLE 0
+#define DSOCR_ODT_SEL_75_OHM 2
+#define DSOCR_ODT_SEL_150_OHM 1
+#define DSOCR_ODT_SEL_50_OHM 3
+#define DSOCR_DQ_ODT_SEL_OFFS 10
+#define DSOCR_DQ_ODT_SEL_MASK (0x3 << DSOCR_DQ_ODT_SEL_OFFS)
+#define DSOCR_DQ_ODT_SEL(odtSel) (odtSel << DSOCR_DQ_ODT_SEL_OFFS)
+#define DSOCR_ST_ODT_SEL_OFFS 12
+#define DSOCR_ST_ODT_SEL_MASK (0x3 << DSOCR_ST_ODT_SEL_OFFS)
+#define DSOCR_ST_ODT_SEL(odtSel) (odtSel << DSOCR_ST_ODT_SEL_OFFS)
+#define DSOCR_ST_ODT_EN (1 << 14)
+
+/* DDR SDRAM Initialization Control Register (DSICR) */
+#define DDR_SDRAM_INIT_CTRL_REG (DRAM_BASE + 0x1480)
+#define DSICR_INIT_EN (1 << 0)
+#define DSICR_T200_SET (1 << 8)
+
+/* sdram extended mode2 register (SEM2R) */
+#define SDRAM_EXTENDED_MODE2_REG (DRAM_BASE + 0x148C)
+#define SEM2R_EMRS2_DDR2_OFFS 0
+#define SEM2R_EMRS2_DDR2_MASK (0x7FFF << SEM2R_EMRS2_DDR2_OFFS)
+
+/* sdram extended mode3 register (SEM3R) */
+#define SDRAM_EXTENDED_MODE3_REG (DRAM_BASE + 0x1490)
+#define SEM3R_EMRS3_DDR2_OFFS 0
+#define SEM3R_EMRS3_DDR2_MASK (0x7FFF << SEM3R_EMRS3_DDR2_OFFS)
+
+/* sdram error registers */
+#define SDRAM_ERROR_CAUSE_REG (DRAM_BASE + 0x14d0)
+#define SDRAM_ERROR_MASK_REG (DRAM_BASE + 0x14d4)
+#define SDRAM_ERROR_DATA_LOW_REG (DRAM_BASE + 0x1444)
+#define SDRAM_ERROR_DATA_HIGH_REG (DRAM_BASE + 0x1440)
+#define SDRAM_ERROR_ADDR_REG (DRAM_BASE + 0x1450)
+#define SDRAM_ERROR_ECC_REG (DRAM_BASE + 0x1448)
+#define SDRAM_CALC_ECC_REG (DRAM_BASE + 0x144c)
+#define SDRAM_ECC_CONTROL_REG (DRAM_BASE + 0x1454)
+#define SDRAM_SINGLE_BIT_ERR_CNTR_REG (DRAM_BASE + 0x1458)
+#define SDRAM_DOUBLE_BIT_ERR_CNTR_REG (DRAM_BASE + 0x145c)
+
+/* SDRAM Error Cause Register (SECR) */
+#define SECR_SINGLE_BIT_ERR BIT0
+#define SECR_DOUBLE_BIT_ERR BIT1
+#define SECR_DATA_PATH_PARITY_ERR BIT2
+/* SDRAM Error Address Register (SEAR) */
+#define SEAR_ERR_TYPE_OFFS 0
+#define SEAR_ERR_TYPE_MASK (1 << SEAR_ERR_TYPE_OFFS)
+#define SEAR_ERR_TYPE_SINGLE 0
+#define SEAR_ERR_TYPE_DOUBLE (1 << SEAR_ERR_TYPE_OFFS)
+#define SEAR_ERR_CS_OFFS 1
+#define SEAR_ERR_CS_MASK (3 << SEAR_ERR_CS_OFFS)
+#define SEAR_ERR_CS(csNum) (csNum << SEAR_ERR_CS_OFFS)
+#define SEAR_ERR_ADDR_OFFS 3
+#define SEAR_ERR_ADDR_MASK (0x1FFFFFFF << SEAR_ERR_ADDR_OFFS)
+
+/* SDRAM ECC Control Register (SECR) */
+#define SECR_FORCEECC_OFFS 0
+#define SECR_FORCEECC_MASK (0xFF << SECR_FORCEECC_OFFS)
+#define SECR_FORCEEN_OFFS 8
+#define SECR_FORCEEN_MASK (1 << SECR_FORCEEN_OFFS)
+#define SECR_ECC_CALC_MASK (0 << SECR_FORCEEN_OFFS)
+#define SECR_ECC_USER_MASK (1 << SECR_FORCEEN_OFFS)
+#define SECR_PERRPROP_EN BIT9
+#define SECR_CNTMODE_OFFS 10
+#define SECR_CNTMODE_MASK (1 << SECR_CNTMODE_OFFS)
+#define SECR_ALL_IN_CS0 (0 << SECR_CNTMODE_OFFS)
+#define SECR_NORMAL_COUNTER (1 << SECR_CNTMODE_OFFS)
+#define SECR_THRECC_OFFS 16
+#define SECR_THRECC_MAX 0xFF
+#define SECR_THRECC_MASK (SECR_THRECC_MAX << SECR_THRECC_OFFS)
+#define SECR_THRECC(threshold) (threshold << SECR_THRECC_OFFS)
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvDramIfRegsh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvDramIfStaticInith
+#define __INCmvDramIfStaticInith
+
+#ifdef MV_STATIC_DRAM_ON_BOARD
+#define STATIC_DRAM_BANK_1
+#undef STATIC_DRAM_BANK_2
+#undef STATIC_DRAM_BANK_3
+#undef STATIC_DRAM_BANK_4
+
+
+#ifdef MV_DIMM_TS256MLQ72V5U
+#define STATIC_DRAM_BANK_2
+#define STATIC_DRAM_BANK_3
+#undef STATIC_DRAM_BANK_4
+
+#define STATIC_SDRAM_CONFIG_REG 0x4724481A /* offset 0x1400 - DMA reg-0xf1000814 */
+#define STATIC_SDRAM_DUNIT_CTRL_REG 0x37707450 /* offset 0x1404 - DMA reg-0xf100081c */
+#define STATIC_SDRAM_TIMING_CTRL_LOW_REG 0x11A13330 /* offset 0x1408 - DMA reg-0xf1000824 */
+#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG 0x00000601 /* offset 0x140c - DMA reg-0xf1000828 */
+#define STATIC_SDRAM_ADDR_CTRL_REG 0x00001CB2 /* offset 0x1410 - DMA reg-0xf1000820 */
+#define STATIC_SDRAM_MODE_REG 0x00000642 /* offset 0x141c - DMA reg-0xf1000818 */
+#define STATIC_SDRAM_ODT_CTRL_LOW 0x030C030C /* 0x1494 */
+#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */
+#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000740F /* 0x149c */
+#define STATIC_SDRAM_EXT_MODE 0x00000404 /* 0x1420 */
+#define STATIC_SDRAM_DDR2_TIMING_LO 0x00074410 /* 0x1428 */
+#define STATIC_SDRAM_DDR2_TIMING_HI 0x00007441 /* 0x147C */
+
+#define STATIC_SDRAM_RANK0_SIZE_DIMM0 0x3FFF /* size bank0 dimm0 - DMA reg-0xf1000810 */
+#define STATIC_SDRAM_RANK1_SIZE_DIMM0 0x3FFF /* size bank1 dimm0 */
+#define STATIC_SDRAM_RANK0_SIZE_DIMM1 0x3FFF /* size bank0 dimm1 */
+#define STATIC_SDRAM_RANK1_SIZE_DIMM1 0x0 /* size bank1 dimm1 */
+
+#endif /* TS256MLQ72V5U */
+
+
+#ifdef MV_MT9VDDT3272AG
+/* one DIMM 256M */
+#define STATIC_SDRAM_CONFIG_REG 0x5820040d /* offset 0x1400 - DMA reg-0xf1000814 */
+#define STATIC_SDRAM_DUNIT_CTRL_REG 0xC4000540 /* offset 0x1404 - DMA reg-0xf100081c */
+#define STATIC_SDRAM_TIMING_CTRL_LOW_REG 0x01602220 /* offset 0x1408 - DMA reg-0xf1000824 */
+#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG 0x0000000b /* offset 0x140c - DMA reg-0xf1000828 */
+#define STATIC_SDRAM_ADDR_CTRL_REG 0x00000012 /* offset 0x1410 - DMA reg-0xf1000820 */
+#define STATIC_SDRAM_MODE_REG 0x00000062 /* offset 0x141c - DMA reg-0xf1000818 */
+#define STATIC_SDRAM_RANK0_SIZE_DIMM0 0x0fff /* size bank0 dimm0 - DMA reg-0xf1000810 */
+#define STATIC_SDRAM_RANK0_SIZE_DIMM1 0x0 /* size bank0 dimm1 */
+
+#endif /* MV_MT9VDDT3272AG */
+
+
+
+#ifdef MV_D27RB12P
+/*
+Two DIMM 512M + ECC enabled, Registered DIMM CAS Latency 2.5
+*/
+
+#define STATIC_SDRAM_CONFIG_REG 0x6826081E /* offset 0x1400 - DMA reg-0xf1000814 */
+#define STATIC_SDRAM_DUNIT_CTRL_REG 0xC5000540 /* offset 0x1404 - DMA reg-0xf100081c */
+#define STATIC_SDRAM_TIMING_CTRL_LOW_REG 0x01501220 /* offset 0x1408 - DMA reg-0xf1000824 */
+#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG 0x00000009 /* offset 0x140c - DMA reg-0xf1000828 */
+#define STATIC_SDRAM_ADDR_CTRL_REG 0x00000012 /* offset 0x1410 - DMA reg-0xf1000820 */
+#define STATIC_SDRAM_MODE_REG 0x00000062 /* offset 0x141c - DMA reg-0xf1000818 */
+#define STATIC_SDRAM_RANK0_SIZE_DIMM0 0x0FFF /* size bank0 dimm0 - DMA reg-0xf1000810 */
+#define STATIC_SDRAM_RANK0_SIZE_DIMM1 0x0FFF /* size bank0 dimm1 */
+
+#define STATIC_DRAM_BANK_2
+
+#define STATIC_DRAM_BANK_3
+#define STATIC_DRAM_BANK_4
+
+#endif /* mv_D27RB12P */
+
+#ifdef RD_MV645XX
+
+#define STATIC_MEM_TYPE MEM_TYPE_DDR2
+#define STATIC_DIMM_INFO_BANK0_SIZE 256
+/* DDR2 boards 256 MB*/
+
+#define STATIC_SDRAM_RANK0_SIZE_DIMM0 0x00000fff /* size bank0 dimm0 - DMA reg-0xf1000810 */
+#define STATIC_SDRAM_CONFIG_REG 0x07190618
+#define STATIC_SDRAM_MODE_REG 0x00000432
+#define STATIC_SDRAM_DUNIT_CTRL_REG 0xf4a03440
+#define STATIC_SDRAM_ADDR_CTRL_REG 0x00000022
+#define STATIC_SDRAM_TIMING_CTRL_LOW_REG 0x11712220
+#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG 0x00000504
+#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000
+#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000
+#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000780f
+#define STATIC_SDRAM_EXT_MODE 0x00000440
+#define STATIC_SDRAM_DDR2_TIMING_LO 0x00063300
+#define STATIC_SDRAM_DDR2_TIMING_HI 0x00006330
+#endif /* RD_MV645XX */
+
+#if MV_DIMM_M3783354CZ3_CE6
+
+#define STATIC_SDRAM_RANK0_SIZE_DIMM0 0x00000FFF /* 0x2010 size bank0 dimm0 - DMA reg-0xf1000810 */
+#define STATIC_SDRAM_CONFIG_REG 0x07190618 /* 0x1400 */
+#define STATIC_SDRAM_MODE_REG 0x00000432 /* 0x141c */
+#define STATIC_SDRAM_DUNIT_CTRL_REG 0xf4a03440 /* 0x1404 */
+#define STATIC_SDRAM_ADDR_CTRL_REG 0x00000022 /* 0x1410 */
+#define STATIC_SDRAM_TIMING_CTRL_LOW_REG 0x11712220 /* 0x1408 */
+#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG 0x00000504 /* 0x140c */
+#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 /* 0x1494 */
+#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */
+#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000780f /* 0x149c */
+#define STATIC_SDRAM_EXT_MODE 0x00000440 /* 0x1420 */
+#define STATIC_SDRAM_DDR2_TIMING_LO 0x00063300 /* 0x1428 */
+#define STATIC_SDRAM_DDR2_TIMING_HI 0x00006330 /* 0x147C */
+
+#endif /* MV_DIMM_M3783354CZ3_CE6 */
+
+#endif /* MV_STATIC_DRAM_ON_BOARD */
+#endif /* __INCmvDramIfStaticInith */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "ddr2/spd/mvSpd.h"
+#include "boardEnv/mvBoardEnvLib.h"
+
+/* #define MV_DEBUG */
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo,
+ MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32 cas2ps(MV_U8 spd_byte);
+/*******************************************************************************
+* mvDramBankGet - Get the DRAM bank paramters.
+*
+* DESCRIPTION:
+* This function retrieves DRAM bank parameters as described in
+* DRAM_BANK_INFO struct to the controller DRAM unit. In case the board
+* has its DRAM on DIMMs it will use its EEPROM to extract SPD data
+* from it. Otherwise, if the DRAM is soldered on board, the function
+* should insert its bank information into MV_DRAM_BANK_INFO struct.
+*
+* INPUT:
+* bankNum - Board DRAM bank number.
+*
+* OUTPUT:
+* pBankInfo - DRAM bank information struct.
+*
+* RETURN:
+* MV_FAIL - Bank parameters could not be read.
+*
+*******************************************************************************/
+MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo)
+{
+ MV_DIMM_INFO dimmInfo;
+
+ DB(mvOsPrintf("Dram: mvDramBankInfoGet bank %d\n", bankNum));
+ /* zero pBankInfo structure */
+
+ if((NULL == pBankInfo) || (bankNum >= MV_DRAM_MAX_CS ))
+ {
+ DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n"));
+ return MV_BAD_PARAM;
+ }
+ memset(pBankInfo, 0, sizeof(*pBankInfo));
+
+ if ( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo))
+ {
+ DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n"));
+ return MV_FAIL;
+ }
+ if ((dimmInfo.numOfModuleBanks == 1) && ((bankNum % 2) == 1))
+ {
+ DB(mvOsPrintf("Dram: ERR dimmSpdGet. Can't find DIMM bank 2 \n"));
+ return MV_FAIL;
+ }
+ /* convert Dimm info to Bank info */
+ cpyDimm2BankInfo(&dimmInfo, pBankInfo);
+ return MV_OK;
+}
+
+/*******************************************************************************
+* cpyDimm2BankInfo - Convert a Dimm info struct into a bank info struct.
+*
+* DESCRIPTION:
+* Convert a Dimm info struct into a bank info struct.
+*
+* INPUT:
+* pDimmInfo - DIMM information structure.
+*
+* OUTPUT:
+* pBankInfo - DRAM bank information struct.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo,
+ MV_DRAM_BANK_INFO *pBankInfo)
+{
+ pBankInfo->memoryType = pDimmInfo->memoryType;
+
+ /* DIMM dimensions */
+ pBankInfo->numOfRowAddr = pDimmInfo->numOfRowAddr;
+ pBankInfo->numOfColAddr = pDimmInfo->numOfColAddr;
+ pBankInfo->dataWidth = pDimmInfo->dataWidth;
+ pBankInfo->errorCheckType = pDimmInfo->errorCheckType;
+ pBankInfo->sdramWidth = pDimmInfo->sdramWidth;
+ pBankInfo->errorCheckDataWidth = pDimmInfo->errorCheckDataWidth;
+ pBankInfo->numOfBanksOnEachDevice = pDimmInfo->numOfBanksOnEachDevice;
+ pBankInfo->suportedCasLatencies = pDimmInfo->suportedCasLatencies;
+ pBankInfo->refreshInterval = pDimmInfo->refreshInterval;
+
+ /* DIMM timing parameters */
+ pBankInfo->minCycleTimeAtMaxCasLatPs = pDimmInfo->minCycleTimeAtMaxCasLatPs;
+ pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps =
+ pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps;
+ pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps =
+ pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps;
+
+ pBankInfo->minRowPrechargeTime = pDimmInfo->minRowPrechargeTime;
+ pBankInfo->minRowActiveToRowActive = pDimmInfo->minRowActiveToRowActive;
+ pBankInfo->minRasToCasDelay = pDimmInfo->minRasToCasDelay;
+ pBankInfo->minRasPulseWidth = pDimmInfo->minRasPulseWidth;
+ pBankInfo->minWriteRecoveryTime = pDimmInfo->minWriteRecoveryTime;
+ pBankInfo->minWriteToReadCmdDelay = pDimmInfo->minWriteToReadCmdDelay;
+ pBankInfo->minReadToPrechCmdDelay = pDimmInfo->minReadToPrechCmdDelay;
+ pBankInfo->minRefreshToActiveCmd = pDimmInfo->minRefreshToActiveCmd;
+
+ /* Parameters calculated from the extracted DIMM information */
+ pBankInfo->size = pDimmInfo->size/pDimmInfo->numOfModuleBanks;
+ pBankInfo->deviceDensity = pDimmInfo->deviceDensity;
+ pBankInfo->numberOfDevices = pDimmInfo->numberOfDevices /
+ pDimmInfo->numOfModuleBanks;
+
+ /* DIMM attributes (MV_TRUE for yes) */
+
+ if ((pDimmInfo->memoryType == MEM_TYPE_SDRAM) ||
+ (pDimmInfo->memoryType == MEM_TYPE_DDR1) )
+ {
+ if (pDimmInfo->dimmAttributes & BIT1)
+ pBankInfo->registeredAddrAndControlInputs = MV_TRUE;
+ else
+ pBankInfo->registeredAddrAndControlInputs = MV_FALSE;
+ }
+ else /* pDimmInfo->memoryType == MEM_TYPE_DDR2 */
+ {
+ if (pDimmInfo->dimmTypeInfo & (BIT0 | BIT4))
+ pBankInfo->registeredAddrAndControlInputs = MV_TRUE;
+ else
+ pBankInfo->registeredAddrAndControlInputs = MV_FALSE;
+ }
+
+ return;
+}
+/*******************************************************************************
+* dimmSpdCpy - Cpy SPD parameters from dimm 0 to dimm 1.
+*
+* DESCRIPTION:
+* Read the DIMM SPD parameters from dimm 0 into dimm 1 SPD.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise.
+*
+*******************************************************************************/
+MV_STATUS dimmSpdCpy(MV_VOID)
+{
+ MV_U32 i;
+ MV_U32 spdChecksum;
+
+ MV_TWSI_SLAVE twsiSlave;
+ MV_U8 data[SPD_SIZE];
+
+ /* zero dimmInfo structure */
+ memset(data, 0, SPD_SIZE);
+
+ /* read the dimm eeprom */
+ DB(mvOsPrintf("DRAM: Read Dimm eeprom\n"));
+ twsiSlave.slaveAddr.address = MV_BOARD_DIMM0_I2C_ADDR;
+ twsiSlave.slaveAddr.type = ADDR7_BIT;
+ twsiSlave.validOffset = MV_TRUE;
+ twsiSlave.offset = 0;
+ twsiSlave.moreThen256 = MV_FALSE;
+
+ if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, data, SPD_SIZE) )
+ {
+ DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 0\n"));
+ return MV_FAIL;
+ }
+ DB(puts("DRAM: Reading dimm info succeded.\n"));
+
+ /* calculate SPD checksum */
+ spdChecksum = 0;
+
+ for(i = 0 ; i <= 62 ; i++)
+ {
+ spdChecksum += data[i];
+ }
+
+ if ((spdChecksum & 0xff) != data[63])
+ {
+ DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n",
+ (MV_U32)(spdChecksum & 0xff), data[63]));
+ }
+ else
+ {
+ DB(mvOsPrintf("DRAM: SPD Checksum ok!\n"));
+ }
+
+ /* copy the SPD content 1:1 into the DIMM 1 SPD */
+ twsiSlave.slaveAddr.address = MV_BOARD_DIMM1_I2C_ADDR;
+ twsiSlave.slaveAddr.type = ADDR7_BIT;
+ twsiSlave.validOffset = MV_TRUE;
+ twsiSlave.offset = 0;
+ twsiSlave.moreThen256 = MV_FALSE;
+
+ for(i = 0 ; i < SPD_SIZE ; i++)
+ {
+ twsiSlave.offset = i;
+ if( MV_OK != mvTwsiWrite (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, &data[i], 1) )
+ {
+ mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 1 byte %d \n",i);
+ return MV_FAIL;
+ }
+ mvOsDelay(5);
+ }
+
+ DB(puts("DRAM: Reading dimm info succeded.\n"));
+ return MV_OK;
+}
+
+/*******************************************************************************
+* dimmSpdGet - Get the SPD parameters.
+*
+* DESCRIPTION:
+* Read the DIMM SPD parameters into given struct parameter.
+*
+* INPUT:
+* dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator.
+*
+* OUTPUT:
+* pDimmInfo - DIMM information structure.
+*
+* RETURN:
+* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise.
+*
+*******************************************************************************/
+MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo)
+{
+ MV_U32 i;
+ MV_U32 density = 1;
+ MV_U32 spdChecksum;
+
+ MV_TWSI_SLAVE twsiSlave;
+ MV_U8 data[SPD_SIZE];
+
+ if((NULL == pDimmInfo)|| (dimmNum >= MAX_DIMM_NUM))
+ {
+ DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n"));
+ return MV_BAD_PARAM;
+ }
+
+ /* zero dimmInfo structure */
+ memset(data, 0, SPD_SIZE);
+
+ /* read the dimm eeprom */
+ DB(mvOsPrintf("DRAM: Read Dimm eeprom\n"));
+ twsiSlave.slaveAddr.address = (dimmNum == 0) ?
+ MV_BOARD_DIMM0_I2C_ADDR : MV_BOARD_DIMM1_I2C_ADDR;
+ twsiSlave.slaveAddr.type = ADDR7_BIT;
+ twsiSlave.validOffset = MV_TRUE;
+ twsiSlave.offset = 0;
+ twsiSlave.moreThen256 = MV_FALSE;
+
+ if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, data, SPD_SIZE) )
+ {
+ DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum %d \n", dimmNum));
+ return MV_FAIL;
+ }
+ DB(puts("DRAM: Reading dimm info succeded.\n"));
+
+ /* calculate SPD checksum */
+ spdChecksum = 0;
+
+ for(i = 0 ; i <= 62 ; i++)
+ {
+ spdChecksum += data[i];
+ }
+
+ if ((spdChecksum & 0xff) != data[63])
+ {
+ DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n",
+ (MV_U32)(spdChecksum & 0xff), data[63]));
+ }
+ else
+ {
+ DB(mvOsPrintf("DRAM: SPD Checksum ok!\n"));
+ }
+
+ /* copy the SPD content 1:1 into the dimmInfo structure*/
+ for(i = 0 ; i < SPD_SIZE ; i++)
+ {
+ pDimmInfo->spdRawData[i] = data[i];
+ DB(mvOsPrintf("SPD-EEPROM Byte %3d = %3x (%3d)\n",i, data[i], data[i]));
+ }
+
+ DB(mvOsPrintf("DRAM SPD Information:\n"));
+
+ /* Memory type (DDR / SDRAM) */
+ switch (data[DIMM_MEM_TYPE])
+ {
+ case (DIMM_MEM_TYPE_SDRAM):
+ pDimmInfo->memoryType = MEM_TYPE_SDRAM;
+ DB(mvOsPrintf("DRAM Memeory type SDRAM\n"));
+ break;
+ case (DIMM_MEM_TYPE_DDR1):
+ pDimmInfo->memoryType = MEM_TYPE_DDR1;
+ DB(mvOsPrintf("DRAM Memeory type DDR1\n"));
+ break;
+ case (DIMM_MEM_TYPE_DDR2):
+ pDimmInfo->memoryType = MEM_TYPE_DDR2;
+ DB(mvOsPrintf("DRAM Memeory type DDR2\n"));
+ break;
+ default:
+ mvOsPrintf("ERROR: Undefined memory type!\n");
+ return MV_ERROR;
+ }
+
+
+ /* Number Of Row Addresses */
+ pDimmInfo->numOfRowAddr = data[DIMM_ROW_NUM];
+ DB(mvOsPrintf("DRAM numOfRowAddr[3] %d\n",pDimmInfo->numOfRowAddr));
+
+ /* Number Of Column Addresses */
+ pDimmInfo->numOfColAddr = data[DIMM_COL_NUM];
+ DB(mvOsPrintf("DRAM numOfColAddr[4] %d\n",pDimmInfo->numOfColAddr));
+
+ /* Number Of Module Banks */
+ pDimmInfo->numOfModuleBanks = data[DIMM_MODULE_BANK_NUM];
+ DB(mvOsPrintf("DRAM numOfModuleBanks[5] 0x%x\n",
+ pDimmInfo->numOfModuleBanks));
+
+ /* Number of module banks encoded differently for DDR2 */
+ if (pDimmInfo->memoryType == MEM_TYPE_DDR2)
+ pDimmInfo->numOfModuleBanks = (pDimmInfo->numOfModuleBanks & 0x7)+1;
+
+ /* Data Width */
+ pDimmInfo->dataWidth = data[DIMM_DATA_WIDTH];
+ DB(mvOsPrintf("DRAM dataWidth[6] 0x%x\n", pDimmInfo->dataWidth));
+
+ /* Minimum Cycle Time At Max CasLatancy */
+ pDimmInfo->minCycleTimeAtMaxCasLatPs = cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS]);
+
+ /* Error Check Type */
+ pDimmInfo->errorCheckType = data[DIMM_ERR_CHECK_TYPE];
+ DB(mvOsPrintf("DRAM errorCheckType[11] 0x%x\n",
+ pDimmInfo->errorCheckType));
+
+ /* Refresh Interval */
+ pDimmInfo->refreshInterval = data[DIMM_REFRESH_INTERVAL];
+ DB(mvOsPrintf("DRAM refreshInterval[12] 0x%x\n",
+ pDimmInfo->refreshInterval));
+
+ /* Sdram Width */
+ pDimmInfo->sdramWidth = data[DIMM_SDRAM_WIDTH];
+ DB(mvOsPrintf("DRAM sdramWidth[13] 0x%x\n",pDimmInfo->sdramWidth));
+
+ /* Error Check Data Width */
+ pDimmInfo->errorCheckDataWidth = data[DIMM_ERR_CHECK_DATA_WIDTH];
+ DB(mvOsPrintf("DRAM errorCheckDataWidth[14] 0x%x\n",
+ pDimmInfo->errorCheckDataWidth));
+
+ /* Burst Length Supported */
+ /* SDRAM/DDR1:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 *
+ *********************************************************/
+ /* DDR2:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD *
+ *********************************************************/
+
+ pDimmInfo->burstLengthSupported = data[DIMM_BURST_LEN_SUP];
+ DB(mvOsPrintf("DRAM burstLengthSupported[16] 0x%x\n",
+ pDimmInfo->burstLengthSupported));
+
+ /* Number Of Banks On Each Device */
+ pDimmInfo->numOfBanksOnEachDevice = data[DIMM_DEV_BANK_NUM];
+ DB(mvOsPrintf("DRAM numOfBanksOnEachDevice[17] 0x%x\n",
+ pDimmInfo->numOfBanksOnEachDevice));
+
+ /* Suported Cas Latencies */
+
+ /* SDRAM:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 *
+ ********************************************************/
+
+ /* DDR 1:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 *
+ *********************************************************/
+
+ /* DDR 2:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD *
+ *********************************************************/
+
+ pDimmInfo->suportedCasLatencies = data[DIMM_SUP_CAL];
+ DB(mvOsPrintf("DRAM suportedCasLatencies[18] 0x%x\n",
+ pDimmInfo->suportedCasLatencies));
+
+ /* For DDR2 only, get the DIMM type information */
+ if (pDimmInfo->memoryType == MEM_TYPE_DDR2)
+ {
+ pDimmInfo->dimmTypeInfo = data[DIMM_DDR2_TYPE_INFORMATION];
+ DB(mvOsPrintf("DRAM dimmTypeInfo[20] (DDR2) 0x%x\n",
+ pDimmInfo->dimmTypeInfo));
+ }
+
+ /* SDRAM Modules Attributes */
+ pDimmInfo->dimmAttributes = data[DIMM_BUF_ADDR_CONT_IN];
+ DB(mvOsPrintf("DRAM dimmAttributes[21] 0x%x\n",
+ pDimmInfo->dimmAttributes));
+
+ /* Minimum Cycle Time At Max CasLatancy Minus 1*/
+ pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps =
+ cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS1]);
+
+ /* Minimum Cycle Time At Max CasLatancy Minus 2*/
+ pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps =
+ cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS2]);
+
+ pDimmInfo->minRowPrechargeTime = data[DIMM_MIN_ROW_PRECHARGE_TIME];
+ DB(mvOsPrintf("DRAM minRowPrechargeTime[27] 0x%x\n",
+ pDimmInfo->minRowPrechargeTime));
+ pDimmInfo->minRowActiveToRowActive = data[DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE];
+ DB(mvOsPrintf("DRAM minRowActiveToRowActive[28] 0x%x\n",
+ pDimmInfo->minRowActiveToRowActive));
+ pDimmInfo->minRasToCasDelay = data[DIMM_MIN_RAS_TO_CAS_DELAY];
+ DB(mvOsPrintf("DRAM minRasToCasDelay[29] 0x%x\n",
+ pDimmInfo->minRasToCasDelay));
+ pDimmInfo->minRasPulseWidth = data[DIMM_MIN_RAS_PULSE_WIDTH];
+ DB(mvOsPrintf("DRAM minRasPulseWidth[30] 0x%x\n",
+ pDimmInfo->minRasPulseWidth));
+
+ /* DIMM Bank Density */
+ pDimmInfo->dimmBankDensity = data[DIMM_BANK_DENSITY];
+ DB(mvOsPrintf("DRAM dimmBankDensity[31] 0x%x\n",
+ pDimmInfo->dimmBankDensity));
+
+ /* Only DDR2 includes Write Recovery Time field. Other SDRAM ignore */
+ pDimmInfo->minWriteRecoveryTime = data[DIMM_MIN_WRITE_RECOVERY_TIME];
+ DB(mvOsPrintf("DRAM minWriteRecoveryTime[36] 0x%x\n",
+ pDimmInfo->minWriteRecoveryTime));
+
+ /* Only DDR2 includes Internal Write To Read Command Delay field. */
+ pDimmInfo->minWriteToReadCmdDelay = data[DIMM_MIN_WRITE_TO_READ_CMD_DELAY];
+ DB(mvOsPrintf("DRAM minWriteToReadCmdDelay[37] 0x%x\n",
+ pDimmInfo->minWriteToReadCmdDelay));
+
+ /* Only DDR2 includes Internal Read To Precharge Command Delay field. */
+ pDimmInfo->minReadToPrechCmdDelay = data[DIMM_MIN_READ_TO_PRECH_CMD_DELAY];
+ DB(mvOsPrintf("DRAM minReadToPrechCmdDelay[38] 0x%x\n",
+ pDimmInfo->minReadToPrechCmdDelay));
+
+ /* Only DDR2 includes Minimum Refresh to Activate/Refresh Command field */
+ pDimmInfo->minRefreshToActiveCmd = data[DIMM_MIN_REFRESH_TO_ACTIVATE_CMD];
+ DB(mvOsPrintf("DRAM minRefreshToActiveCmd[42] 0x%x\n",
+ pDimmInfo->minRefreshToActiveCmd));
+
+ /* calculating the sdram density. Representing device density from */
+ /* bit 20 to allow representation of 4GB and above. */
+ /* For example, if density is 512Mbit 0x20000000, will be represent in */
+ /* deviceDensity by 0x20000000 >> 16 --> 0x00000200. Another example */
+ /* is density 8GB 0x200000000 >> 16 --> 0x00002000. */
+ density = (1 << ((pDimmInfo->numOfRowAddr + pDimmInfo->numOfColAddr) - 20));
+ pDimmInfo->deviceDensity = density *
+ pDimmInfo->numOfBanksOnEachDevice *
+ pDimmInfo->sdramWidth;
+ DB(mvOsPrintf("DRAM deviceDensity %d\n",pDimmInfo->deviceDensity));
+
+ /* Number of devices includeing Error correction */
+ pDimmInfo->numberOfDevices = (pDimmInfo->dataWidth/pDimmInfo->sdramWidth) *
+ pDimmInfo->numOfModuleBanks;
+ DB(mvOsPrintf("DRAM numberOfDevices %d\n",
+ pDimmInfo->numberOfDevices));
+
+ pDimmInfo->size = 0;
+
+ /* Note that pDimmInfo->size is in MB units */
+ if (pDimmInfo->memoryType == MEM_TYPE_SDRAM)
+ {
+ if (pDimmInfo->dimmBankDensity & BIT0)
+ pDimmInfo->size += 1024; /* Equal to 1GB */
+ else if (pDimmInfo->dimmBankDensity & BIT1)
+ pDimmInfo->size += 8; /* Equal to 8MB */
+ else if (pDimmInfo->dimmBankDensity & BIT2)
+ pDimmInfo->size += 16; /* Equal to 16MB */
+ else if (pDimmInfo->dimmBankDensity & BIT3)
+ pDimmInfo->size += 32; /* Equal to 32MB */
+ else if (pDimmInfo->dimmBankDensity & BIT4)
+ pDimmInfo->size += 64; /* Equal to 64MB */
+ else if (pDimmInfo->dimmBankDensity & BIT5)
+ pDimmInfo->size += 128; /* Equal to 128MB */
+ else if (pDimmInfo->dimmBankDensity & BIT6)
+ pDimmInfo->size += 256; /* Equal to 256MB */
+ else if (pDimmInfo->dimmBankDensity & BIT7)
+ pDimmInfo->size += 512; /* Equal to 512MB */
+ }
+ else if (pDimmInfo->memoryType == MEM_TYPE_DDR1)
+ {
+ if (pDimmInfo->dimmBankDensity & BIT0)
+ pDimmInfo->size += 1024; /* Equal to 1GB */
+ else if (pDimmInfo->dimmBankDensity & BIT1)
+ pDimmInfo->size += 2048; /* Equal to 2GB */
+ else if (pDimmInfo->dimmBankDensity & BIT2)
+ pDimmInfo->size += 16; /* Equal to 16MB */
+ else if (pDimmInfo->dimmBankDensity & BIT3)
+ pDimmInfo->size += 32; /* Equal to 32MB */
+ else if (pDimmInfo->dimmBankDensity & BIT4)
+ pDimmInfo->size += 64; /* Equal to 64MB */
+ else if (pDimmInfo->dimmBankDensity & BIT5)
+ pDimmInfo->size += 128; /* Equal to 128MB */
+ else if (pDimmInfo->dimmBankDensity & BIT6)
+ pDimmInfo->size += 256; /* Equal to 256MB */
+ else if (pDimmInfo->dimmBankDensity & BIT7)
+ pDimmInfo->size += 512; /* Equal to 512MB */
+ }
+ else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+ {
+ if (pDimmInfo->dimmBankDensity & BIT0)
+ pDimmInfo->size += 1024; /* Equal to 1GB */
+ else if (pDimmInfo->dimmBankDensity & BIT1)
+ pDimmInfo->size += 2048; /* Equal to 2GB */
+ else if (pDimmInfo->dimmBankDensity & BIT2)
+ pDimmInfo->size += 4096; /* Equal to 4GB */
+ else if (pDimmInfo->dimmBankDensity & BIT3)
+ pDimmInfo->size += 8192; /* Equal to 8GB */
+ else if (pDimmInfo->dimmBankDensity & BIT4)
+ pDimmInfo->size += 16384; /* Equal to 16GB */
+ else if (pDimmInfo->dimmBankDensity & BIT5)
+ pDimmInfo->size += 128; /* Equal to 128MB */
+ else if (pDimmInfo->dimmBankDensity & BIT6)
+ pDimmInfo->size += 256; /* Equal to 256MB */
+ else if (pDimmInfo->dimmBankDensity & BIT7)
+ pDimmInfo->size += 512; /* Equal to 512MB */
+ }
+
+ pDimmInfo->size *= pDimmInfo->numOfModuleBanks;
+
+ DB(mvOsPrintf("Dram: dimm size %dMB \n",pDimmInfo->size));
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* dimmSpdPrint - Print the SPD parameters.
+*
+* DESCRIPTION:
+* Print the Dimm SPD parameters.
+*
+* INPUT:
+* pDimmInfo - DIMM information structure.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_VOID dimmSpdPrint(MV_U32 dimmNum)
+{
+ MV_DIMM_INFO dimmInfo;
+ MV_U32 i, temp = 0;
+ MV_U32 k, maskLeftOfPoint = 0, maskRightOfPoint = 0;
+ MV_U32 rightOfPoint = 0,leftOfPoint = 0, div, time_tmp, shift;
+ MV_U32 busClkPs;
+ MV_U8 trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks,
+ temp_buf[40], *spdRawData;
+
+ busClkPs = 1000000000 / (mvBoardSysClkGet() / 100); /* in 10 ps units */
+
+ spdRawData = dimmInfo.spdRawData;
+
+ if(MV_OK != dimmSpdGet(dimmNum, &dimmInfo))
+ {
+ mvOsOutput("ERROR: Could not read SPD information!\n");
+ return;
+ }
+
+ /* find Manufactura of Dimm Module */
+ mvOsOutput("\nManufacturer's JEDEC ID Code: ");
+ for(i = 0 ; i < DIMM_MODULE_MANU_SIZE ; i++)
+ {
+ mvOsOutput("%x",spdRawData[DIMM_MODULE_MANU_OFFS + i]);
+ }
+ mvOsOutput("\n");
+
+ /* Manufacturer's Specific Data */
+ for(i = 0 ; i < DIMM_MODULE_ID_SIZE ; i++)
+ {
+ temp_buf[i] = spdRawData[DIMM_MODULE_ID_OFFS + i];
+ }
+ mvOsOutput("Manufacturer's Specific Data: %s\n", temp_buf);
+
+ /* Module Part Number */
+ for(i = 0 ; i < DIMM_MODULE_VEN_SIZE ; i++)
+ {
+ temp_buf[i] = spdRawData[DIMM_MODULE_VEN_OFFS + i];
+ }
+ mvOsOutput("Module Part Number: %s\n", temp_buf);
+
+ /* Module Serial Number */
+ for(i = 0; i < sizeof(MV_U32); i++)
+ {
+ temp |= spdRawData[95+i] << 8*i;
+ }
+ mvOsOutput("DIMM Serial No. %ld (%lx)\n", (long)temp,
+ (long)temp);
+
+ /* find Manufac-Data of Dimm Module */
+ mvOsOutput("Manufactoring Date: Year 20%d%d/ ww %d%d\n",
+ ((spdRawData[93] & 0xf0) >> 4), (spdRawData[93] & 0xf),
+ ((spdRawData[94] & 0xf0) >> 4), (spdRawData[94] & 0xf));
+ /* find modul_revision of Dimm Module */
+ mvOsOutput("Module Revision: %d.%d\n",
+ spdRawData[62]/10, spdRawData[62]%10);
+
+ /* find manufac_place of Dimm Module */
+ mvOsOutput("manufac_place: %d\n", spdRawData[72]);
+
+ /* go over the first 35 I2C data bytes */
+ for(i = 2 ; i <= 35 ; i++)
+ switch(i)
+ {
+ case 2: /* Memory type (DDR1/2 / SDRAM) */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ mvOsOutput("Dram Type is: SDRAM\n");
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+ mvOsOutput("Dram Type is: SDRAM DDR1\n");
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+ mvOsOutput("Dram Type is: SDRAM DDR2\n");
+ else
+ mvOsOutput("Dram Type unknown\n");
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 3: /* Number Of Row Addresses */
+ mvOsOutput("Module Number of row addresses: %d\n",
+ dimmInfo.numOfRowAddr);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 4: /* Number Of Column Addresses */
+ mvOsOutput("Module Number of col addresses: %d\n",
+ dimmInfo.numOfColAddr);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 5: /* Number Of Module Banks */
+ mvOsOutput("Number of Banks on Mod.: %d\n",
+ dimmInfo.numOfModuleBanks);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 6: /* Data Width */
+ mvOsOutput("Module Data Width: %d bit\n",
+ dimmInfo.dataWidth);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 8: /* Voltage Interface */
+ switch(spdRawData[i])
+ {
+ case 0x0:
+ mvOsOutput("Module is TTL_5V_TOLERANT\n");
+ break;
+ case 0x1:
+ mvOsOutput("Module is LVTTL\n");
+ break;
+ case 0x2:
+ mvOsOutput("Module is HSTL_1_5V\n");
+ break;
+ case 0x3:
+ mvOsOutput("Module is SSTL_3_3V\n");
+ break;
+ case 0x4:
+ mvOsOutput("Module is SSTL_2_5V\n");
+ break;
+ case 0x5:
+ if (dimmInfo.memoryType != MEM_TYPE_SDRAM)
+ {
+ mvOsOutput("Module is SSTL_1_8V\n");
+ break;
+ }
+ default:
+ mvOsOutput("Module is VOLTAGE_UNKNOWN\n");
+ break;
+ }
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 9: /* Minimum Cycle Time At Max CasLatancy */
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+
+ /* DDR2 addition of right of point */
+ if ((spdRawData[i] & 0x0f) == 0xA)
+ {
+ rightOfPoint = 25;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xB)
+ {
+ rightOfPoint = 33;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xC)
+ {
+ rightOfPoint = 66;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xD)
+ {
+ rightOfPoint = 75;
+ }
+ mvOsOutput("Minimum Cycle Time At Max CL: %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 10: /* Clock To Data Out */
+ div = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 10:100;
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / div;
+ rightOfPoint = time_tmp % div;
+ mvOsOutput("Clock To Data Out: %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 11: /* Error Check Type */
+ mvOsOutput("Error Check Type (0=NONE): %d\n",
+ dimmInfo.errorCheckType);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 12: /* Refresh Interval */
+ mvOsOutput("Refresh Rate: %x\n",
+ dimmInfo.refreshInterval);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 13: /* Sdram Width */
+ mvOsOutput("Sdram Width: %d bits\n",
+ dimmInfo.sdramWidth);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 14: /* Error Check Data Width */
+ mvOsOutput("Error Check Data Width: %d bits\n",
+ dimmInfo.errorCheckDataWidth);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 15: /* Minimum Clock Delay is unsupported */
+ if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) ||
+ (dimmInfo.memoryType == MEM_TYPE_DDR1))
+ {
+ mvOsOutput("Minimum Clk Delay back to back: %d\n",
+ spdRawData[i]);
+ }
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 16: /* Burst Length Supported */
+ /* SDRAM/DDR1:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 *
+ *********************************************************/
+ /* DDR2:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD *
+ *********************************************************/
+ mvOsOutput("Burst Length Supported: ");
+ if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) ||
+ (dimmInfo.memoryType == MEM_TYPE_DDR1))
+ {
+ if (dimmInfo.burstLengthSupported & BIT0)
+ mvOsOutput("1, ");
+ if (dimmInfo.burstLengthSupported & BIT1)
+ mvOsOutput("2, ");
+ }
+ if (dimmInfo.burstLengthSupported & BIT2)
+ mvOsOutput("4, ");
+ if (dimmInfo.burstLengthSupported & BIT3)
+ mvOsOutput("8, ");
+
+ mvOsOutput(" Bit \n");
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 17: /* Number Of Banks On Each Device */
+ mvOsOutput("Number Of Banks On Each Chip: %d\n",
+ dimmInfo.numOfBanksOnEachDevice);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 18: /* Suported Cas Latencies */
+
+ /* SDRAM:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 *
+ ********************************************************/
+
+ /* DDR 1:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 *
+ *********************************************************/
+
+ /* DDR 2:
+ *******-******-******-******-******-******-******-*******
+ * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+ *******-******-******-******-******-******-******-*******
+ CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD *
+ *********************************************************/
+
+ mvOsOutput("Suported Cas Latencies: (CL) ");
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ for (k = 0; k <=7; k++)
+ {
+ if (dimmInfo.suportedCasLatencies & (1 << k))
+ mvOsOutput("%d, ", k+1);
+ }
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+ {
+ if (dimmInfo.suportedCasLatencies & BIT0)
+ mvOsOutput("1, ");
+ if (dimmInfo.suportedCasLatencies & BIT1)
+ mvOsOutput("1.5, ");
+ if (dimmInfo.suportedCasLatencies & BIT2)
+ mvOsOutput("2, ");
+ if (dimmInfo.suportedCasLatencies & BIT3)
+ mvOsOutput("2.5, ");
+ if (dimmInfo.suportedCasLatencies & BIT4)
+ mvOsOutput("3, ");
+ if (dimmInfo.suportedCasLatencies & BIT5)
+ mvOsOutput("3.5, ");
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+ {
+ if (dimmInfo.suportedCasLatencies & BIT2)
+ mvOsOutput("2, ");
+ if (dimmInfo.suportedCasLatencies & BIT3)
+ mvOsOutput("3, ");
+ if (dimmInfo.suportedCasLatencies & BIT4)
+ mvOsOutput("4, ");
+ if (dimmInfo.suportedCasLatencies & BIT5)
+ mvOsOutput("5, ");
+ }
+ else
+ mvOsOutput("?.?, ");
+ mvOsOutput("\n");
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 20: /* DDR2 DIMM type info */
+ if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+ {
+ if (dimmInfo.dimmTypeInfo & (BIT0 | BIT4))
+ mvOsOutput("Registered DIMM (RDIMM)\n");
+ else if (dimmInfo.dimmTypeInfo & (BIT1 | BIT5))
+ mvOsOutput("Unbuffered DIMM (UDIMM)\n");
+ else
+ mvOsOutput("Unknown DIMM type.\n");
+ }
+
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 21: /* SDRAM Modules Attributes */
+ mvOsOutput("\nModule Attributes (SPD Byte 21): \n");
+
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ if (dimmInfo.dimmAttributes & BIT0)
+ mvOsOutput(" Buffered Addr/Control Input: Yes\n");
+ else
+ mvOsOutput(" Buffered Addr/Control Input: No\n");
+
+ if (dimmInfo.dimmAttributes & BIT1)
+ mvOsOutput(" Registered Addr/Control Input: Yes\n");
+ else
+ mvOsOutput(" Registered Addr/Control Input: No\n");
+
+ if (dimmInfo.dimmAttributes & BIT2)
+ mvOsOutput(" On-Card PLL (clock): Yes \n");
+ else
+ mvOsOutput(" On-Card PLL (clock): No \n");
+
+ if (dimmInfo.dimmAttributes & BIT3)
+ mvOsOutput(" Bufferd DQMB Input: Yes \n");
+ else
+ mvOsOutput(" Bufferd DQMB Inputs: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT4)
+ mvOsOutput(" Registered DQMB Inputs: Yes \n");
+ else
+ mvOsOutput(" Registered DQMB Inputs: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT5)
+ mvOsOutput(" Differential Clock Input: Yes \n");
+ else
+ mvOsOutput(" Differential Clock Input: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT6)
+ mvOsOutput(" redundant Row Addressing: Yes \n");
+ else
+ mvOsOutput(" redundant Row Addressing: No \n");
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+ {
+ if (dimmInfo.dimmAttributes & BIT0)
+ mvOsOutput(" Buffered Addr/Control Input: Yes\n");
+ else
+ mvOsOutput(" Buffered Addr/Control Input: No\n");
+
+ if (dimmInfo.dimmAttributes & BIT1)
+ mvOsOutput(" Registered Addr/Control Input: Yes\n");
+ else
+ mvOsOutput(" Registered Addr/Control Input: No\n");
+
+ if (dimmInfo.dimmAttributes & BIT2)
+ mvOsOutput(" On-Card PLL (clock): Yes \n");
+ else
+ mvOsOutput(" On-Card PLL (clock): No \n");
+
+ if (dimmInfo.dimmAttributes & BIT3)
+ mvOsOutput(" FET Switch On-Card Enabled: Yes \n");
+ else
+ mvOsOutput(" FET Switch On-Card Enabled: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT4)
+ mvOsOutput(" FET Switch External Enabled: Yes \n");
+ else
+ mvOsOutput(" FET Switch External Enabled: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT5)
+ mvOsOutput(" Differential Clock Input: Yes \n");
+ else
+ mvOsOutput(" Differential Clock Input: No \n");
+ }
+ else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+ {
+ mvOsOutput(" Number of Active Registers on the DIMM: %d\n",
+ (dimmInfo.dimmAttributes & 0x3) + 1);
+
+ mvOsOutput(" Number of PLLs on the DIMM: %d\n",
+ ((dimmInfo.dimmAttributes) >> 2) & 0x3);
+
+ if (dimmInfo.dimmAttributes & BIT4)
+ mvOsOutput(" FET Switch External Enabled: Yes \n");
+ else
+ mvOsOutput(" FET Switch External Enabled: No \n");
+
+ if (dimmInfo.dimmAttributes & BIT6)
+ mvOsOutput(" Analysis probe installed: Yes \n");
+ else
+ mvOsOutput(" Analysis probe installed: No \n");
+ }
+
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 22: /* Suported AutoPreCharge */
+ mvOsOutput("\nModul Attributes (SPD Byte 22): \n");
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ if ( spdRawData[i] & BIT0 )
+ mvOsOutput(" Early Ras Precharge: Yes \n");
+ else
+ mvOsOutput(" Early Ras Precharge: No \n");
+
+ if ( spdRawData[i] & BIT1 )
+ mvOsOutput(" AutoPreCharge: Yes \n");
+ else
+ mvOsOutput(" AutoPreCharge: No \n");
+
+ if ( spdRawData[i] & BIT2 )
+ mvOsOutput(" Precharge All: Yes \n");
+ else
+ mvOsOutput(" Precharge All: No \n");
+
+ if ( spdRawData[i] & BIT3 )
+ mvOsOutput(" Write 1/ReadBurst: Yes \n");
+ else
+ mvOsOutput(" Write 1/ReadBurst: No \n");
+
+ if ( spdRawData[i] & BIT4 )
+ mvOsOutput(" lower VCC tolerance: 5%%\n");
+ else
+ mvOsOutput(" lower VCC tolerance: 10%%\n");
+
+ if ( spdRawData[i] & BIT5 )
+ mvOsOutput(" upper VCC tolerance: 5%%\n");
+ else
+ mvOsOutput(" upper VCC tolerance: 10%%\n");
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+ {
+ if ( spdRawData[i] & BIT0 )
+ mvOsOutput(" Supports Weak Driver: Yes \n");
+ else
+ mvOsOutput(" Supports Weak Driver: No \n");
+
+ if ( !(spdRawData[i] & BIT4) )
+ mvOsOutput(" lower VCC tolerance: 0.2V\n");
+
+ if ( !(spdRawData[i] & BIT5) )
+ mvOsOutput(" upper VCC tolerance: 0.2V\n");
+
+ if ( spdRawData[i] & BIT6 )
+ mvOsOutput(" Concurrent Auto Preharge: Yes \n");
+ else
+ mvOsOutput(" Concurrent Auto Preharge: No \n");
+
+ if ( spdRawData[i] & BIT7 )
+ mvOsOutput(" Supports Fast AP: Yes \n");
+ else
+ mvOsOutput(" Supports Fast AP: No \n");
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+ {
+ if ( spdRawData[i] & BIT0 )
+ mvOsOutput(" Supports Weak Driver: Yes \n");
+ else
+ mvOsOutput(" Supports Weak Driver: No \n");
+ }
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 23:
+ /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+
+ /* DDR2 addition of right of point */
+ if ((spdRawData[i] & 0x0f) == 0xA)
+ {
+ rightOfPoint = 25;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xB)
+ {
+ rightOfPoint = 33;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xC)
+ {
+ rightOfPoint = 66;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xD)
+ {
+ rightOfPoint = 75;
+ }
+
+ mvOsOutput("Minimum Cycle Time At 2nd highest CasLatancy"
+ "(0 = Not supported): %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint );
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/
+ div = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 10:100;
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / div;
+ rightOfPoint = time_tmp % div;
+ mvOsOutput("Clock To Data Out (2nd CL value): %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 25:
+ /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ leftOfPoint = (spdRawData[i] & 0xfc) >> 2;
+ rightOfPoint = (spdRawData[i] & 0x3) * 25;
+ }
+ else /* DDR1 or DDR2 */
+ {
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+
+ /* DDR2 addition of right of point */
+ if ((spdRawData[i] & 0x0f) == 0xA)
+ {
+ rightOfPoint = 25;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xB)
+ {
+ rightOfPoint = 33;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xC)
+ {
+ rightOfPoint = 66;
+ }
+ if ((spdRawData[i] & 0x0f) == 0xD)
+ {
+ rightOfPoint = 75;
+ }
+ }
+ mvOsOutput("Minimum Cycle Time At 3rd highest CasLatancy"
+ "(0 = Not supported): %d.%d [ns]\n",
+ leftOfPoint, rightOfPoint );
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ leftOfPoint = (spdRawData[i] & 0xfc) >> 2;
+ rightOfPoint = (spdRawData[i] & 0x3) * 25;
+ }
+ else /* DDR1 or DDR2 */
+ {
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = 0;
+ rightOfPoint = time_tmp;
+ }
+ mvOsOutput("Clock To Data Out (3rd CL value): %d.%2d[ns]\n",
+ leftOfPoint, rightOfPoint );
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 27: /* Minimum Row Precharge Time */
+ shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+ maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0xff : 0xfc;
+ maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0x00 : 0x03;
+ leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+ rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;
+ temp = ((leftOfPoint*100) + rightOfPoint);/* in 10ps Intervals*/
+ trp_clocks = (temp + (busClkPs-1)) / busClkPs;
+ mvOsOutput("Minimum Row Precharge Time [ns]: %d.%d = "
+ "in Clk cycles %d\n",
+ leftOfPoint, rightOfPoint, trp_clocks);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 28: /* Minimum Row Active to Row Active Time */
+ shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+ maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0xff : 0xfc;
+ maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0x00 : 0x03;
+ leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+ rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;
+ temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/
+ trrd_clocks = (temp + (busClkPs-1)) / busClkPs;
+ mvOsOutput("Minimum Row Active -To- Row Active Delay [ns]: "
+ "%d.%d = in Clk cycles %d\n",
+ leftOfPoint, rightOfPoint, trp_clocks);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 29: /* Minimum Ras-To-Cas Delay */
+ shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+ maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0xff : 0xfc;
+ maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ?
+ 0x00 : 0x03;
+ leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+ rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;
+ temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/
+ trcd_clocks = (temp + (busClkPs-1) )/ busClkPs;
+ mvOsOutput("Minimum Ras-To-Cas Delay [ns]: %d.%d = "
+ "in Clk cycles %d\n",
+ leftOfPoint, rightOfPoint, trp_clocks);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 30: /* Minimum Ras Pulse Width */
+ tras_clocks = (cas2ps(spdRawData[i])+(busClkPs-1)) / busClkPs;
+ mvOsOutput("Minimum Ras Pulse Width [ns]: %d = "
+ "in Clk cycles %d\n", spdRawData[i], tras_clocks);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 31: /* Module Bank Density */
+ mvOsOutput("Module Bank Density (more than 1= Multisize-Module):");
+
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ if (dimmInfo.dimmBankDensity & BIT0)
+ mvOsOutput("1GB, ");
+ if (dimmInfo.dimmBankDensity & BIT1)
+ mvOsOutput("8MB, ");
+ if (dimmInfo.dimmBankDensity & BIT2)
+ mvOsOutput("16MB, ");
+ if (dimmInfo.dimmBankDensity & BIT3)
+ mvOsOutput("32MB, ");
+ if (dimmInfo.dimmBankDensity & BIT4)
+ mvOsOutput("64MB, ");
+ if (dimmInfo.dimmBankDensity & BIT5)
+ mvOsOutput("128MB, ");
+ if (dimmInfo.dimmBankDensity & BIT6)
+ mvOsOutput("256MB, ");
+ if (dimmInfo.dimmBankDensity & BIT7)
+ mvOsOutput("512MB, ");
+ }
+ else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+ {
+ if (dimmInfo.dimmBankDensity & BIT0)
+ mvOsOutput("1GB, ");
+ if (dimmInfo.dimmBankDensity & BIT1)
+ mvOsOutput("2GB, ");
+ if (dimmInfo.dimmBankDensity & BIT2)
+ mvOsOutput("16MB, ");
+ if (dimmInfo.dimmBankDensity & BIT3)
+ mvOsOutput("32MB, ");
+ if (dimmInfo.dimmBankDensity & BIT4)
+ mvOsOutput("64MB, ");
+ if (dimmInfo.dimmBankDensity & BIT5)
+ mvOsOutput("128MB, ");
+ if (dimmInfo.dimmBankDensity & BIT6)
+ mvOsOutput("256MB, ");
+ if (dimmInfo.dimmBankDensity & BIT7)
+ mvOsOutput("512MB, ");
+ }
+ else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+ {
+ if (dimmInfo.dimmBankDensity & BIT0)
+ mvOsOutput("1GB, ");
+ if (dimmInfo.dimmBankDensity & BIT1)
+ mvOsOutput("2GB, ");
+ if (dimmInfo.dimmBankDensity & BIT2)
+ mvOsOutput("4GB, ");
+ if (dimmInfo.dimmBankDensity & BIT3)
+ mvOsOutput("8GB, ");
+ if (dimmInfo.dimmBankDensity & BIT4)
+ mvOsOutput("16GB, ");
+ if (dimmInfo.dimmBankDensity & BIT5)
+ mvOsOutput("128MB, ");
+ if (dimmInfo.dimmBankDensity & BIT6)
+ mvOsOutput("256MB, ");
+ if (dimmInfo.dimmBankDensity & BIT7)
+ mvOsOutput("512MB, ");
+ }
+ mvOsOutput("\n");
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 32: /* Address And Command Setup Time (measured in ns/1000) */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ rightOfPoint = (spdRawData[i] & 0x0f);
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ if(leftOfPoint > 7)
+ {
+ leftOfPoint *= -1;
+ }
+ }
+ else /* DDR1 or DDR2 */
+ {
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ }
+ mvOsOutput("Address And Command Setup Time [ns]: %d.%d\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 33: /* Address And Command Hold Time */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ rightOfPoint = (spdRawData[i] & 0x0f);
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ if(leftOfPoint > 7)
+ {
+ leftOfPoint *= -1;
+ }
+ }
+ else /* DDR1 or DDR2 */
+ {
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ }
+ mvOsOutput("Address And Command Hold Time [ns]: %d.%d\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 34: /* Data Input Setup Time */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ rightOfPoint = (spdRawData[i] & 0x0f);
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ if(leftOfPoint > 7)
+ {
+ leftOfPoint *= -1;
+ }
+ }
+ else /* DDR1 or DDR2 */
+ {
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ }
+ mvOsOutput("Data Input Setup Time [ns]: %d.%d\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 35: /* Data Input Hold Time */
+ if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+ {
+ rightOfPoint = (spdRawData[i] & 0x0f);
+ leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+ if(leftOfPoint > 7)
+ {
+ leftOfPoint *= -1;
+ }
+ }
+ else /* DDR1 or DDR2 */
+ {
+ time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) +
+ ((spdRawData[i] & 0x0f));
+ leftOfPoint = time_tmp / 100;
+ rightOfPoint = time_tmp % 100;
+ }
+ mvOsOutput("Data Input Hold Time [ns]: %d.%d\n\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+
+ case 36: /* Relevant for DDR2 only: Write Recovery Time */
+ leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> 2);
+ rightOfPoint = (spdRawData[i] & maskRightOfPoint) * 25;
+ mvOsOutput("Write Recovery Time [ns]: %d.%d\n",
+ leftOfPoint, rightOfPoint);
+ break;
+/*----------------------------------------------------------------------------*/
+ }
+
+}
+
+
+/*
+ * translate ns.ns/10 coding of SPD timing values
+ * into ps unit values
+ */
+/*******************************************************************************
+* cas2ps - Translate x.y ns parameter to pico-seconds values
+*
+* DESCRIPTION:
+* This function translates x.y nano seconds to its value in pico seconds.
+* For example 3.75ns will return 3750.
+*
+* INPUT:
+* spd_byte - DIMM SPD byte.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* value in pico seconds.
+*
+*******************************************************************************/
+static MV_U32 cas2ps(MV_U8 spd_byte)
+{
+ MV_U32 ns, ns10;
+
+ /* isolate upper nibble */
+ ns = (spd_byte >> 4) & 0x0F;
+ /* isolate lower nibble */
+ ns10 = (spd_byte & 0x0F);
+
+ if( ns10 < 10 ) {
+ ns10 *= 10;
+ }
+ else if( ns10 == 10 )
+ ns10 = 25;
+ else if( ns10 == 11 )
+ ns10 = 33;
+ else if( ns10 == 12 )
+ ns10 = 66;
+ else if( ns10 == 13 )
+ ns10 = 75;
+ else
+ {
+ mvOsOutput("cas2ps Err. unsupported cycle time.\n");
+ }
+
+ return (ns*1000 + ns10*10);
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDram
+#define __INCmvDram
+
+#include "ddr2/mvDramIf.h"
+#include "twsi/mvTwsi.h"
+
+#define MAX_DIMM_NUM 2
+#define SPD_SIZE 128
+
+/* Dimm spd offsets */
+#define DIMM_MEM_TYPE 2
+#define DIMM_ROW_NUM 3
+#define DIMM_COL_NUM 4
+#define DIMM_MODULE_BANK_NUM 5
+#define DIMM_DATA_WIDTH 6
+#define DIMM_VOLT_IF 8
+#define DIMM_MIN_CC_AT_MAX_CAS 9
+#define DIMM_ERR_CHECK_TYPE 11
+#define DIMM_REFRESH_INTERVAL 12
+#define DIMM_SDRAM_WIDTH 13
+#define DIMM_ERR_CHECK_DATA_WIDTH 14
+#define DIMM_MIN_CLK_DEL 15
+#define DIMM_BURST_LEN_SUP 16
+#define DIMM_DEV_BANK_NUM 17
+#define DIMM_SUP_CAL 18
+#define DIMM_DDR2_TYPE_INFORMATION 20 /* DDR2 only */
+#define DIMM_BUF_ADDR_CONT_IN 21
+#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1 23
+#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2 25
+#define DIMM_MIN_ROW_PRECHARGE_TIME 27
+#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE 28
+#define DIMM_MIN_RAS_TO_CAS_DELAY 29
+#define DIMM_MIN_RAS_PULSE_WIDTH 30
+#define DIMM_BANK_DENSITY 31
+#define DIMM_MIN_WRITE_RECOVERY_TIME 36
+#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY 37
+#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY 38
+#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD 42
+#define DIMM_SPD_VERSION 62
+
+/* Dimm Memory Type values */
+#define DIMM_MEM_TYPE_SDRAM 0x4
+#define DIMM_MEM_TYPE_DDR1 0x7
+#define DIMM_MEM_TYPE_DDR2 0x8
+
+#define DIMM_MODULE_MANU_OFFS 64
+#define DIMM_MODULE_MANU_SIZE 8
+#define DIMM_MODULE_VEN_OFFS 73
+#define DIMM_MODULE_VEN_SIZE 25
+#define DIMM_MODULE_ID_OFFS 99
+#define DIMM_MODULE_ID_SIZE 18
+
+/* enumeration for voltage levels. */
+typedef enum _mvDimmVoltageIf
+{
+ TTL_5V_TOLERANT,
+ LVTTL,
+ HSTL_1_5V,
+ SSTL_3_3V,
+ SSTL_2_5V,
+ VOLTAGE_UNKNOWN,
+} MV_DIMM_VOLTAGE_IF;
+
+
+/* enumaration for SDRAM CAS Latencies. */
+typedef enum _mvDimmSdramCas
+{
+ SD_CL_1 =1,
+ SD_CL_2,
+ SD_CL_3,
+ SD_CL_4,
+ SD_CL_5,
+ SD_CL_6,
+ SD_CL_7,
+ SD_FAULT
+}MV_DIMM_SDRAM_CAS;
+
+
+/* DIMM information structure */
+typedef struct _mvDimmInfo
+{
+ MV_MEMORY_TYPE memoryType; /* DDR or SDRAM */
+
+ MV_U8 spdRawData[SPD_SIZE]; /* Content of SPD-EEPROM copied 1:1 */
+
+ /* DIMM dimensions */
+ MV_U32 numOfRowAddr;
+ MV_U32 numOfColAddr;
+ MV_U32 numOfModuleBanks;
+ MV_U32 dataWidth;
+ MV_U32 errorCheckType; /* ECC , PARITY..*/
+ MV_U32 sdramWidth; /* 4,8,16 or 32 */
+ MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */
+ MV_U32 burstLengthSupported;
+ MV_U32 numOfBanksOnEachDevice;
+ MV_U32 suportedCasLatencies;
+ MV_U32 refreshInterval;
+ MV_U32 dimmBankDensity;
+ MV_U32 dimmTypeInfo; /* DDR2 only */
+ MV_U32 dimmAttributes;
+
+ /* DIMM timing parameters */
+ MV_U32 minCycleTimeAtMaxCasLatPs;
+ MV_U32 minCycleTimeAtMaxCasLatMinus1Ps;
+ MV_U32 minCycleTimeAtMaxCasLatMinus2Ps;
+ MV_U32 minRowPrechargeTime;
+ MV_U32 minRowActiveToRowActive;
+ MV_U32 minRasToCasDelay;
+ MV_U32 minRasPulseWidth;
+ MV_U32 minWriteRecoveryTime; /* DDR2 only */
+ MV_U32 minWriteToReadCmdDelay; /* DDR2 only */
+ MV_U32 minReadToPrechCmdDelay; /* DDR2 only */
+ MV_U32 minRefreshToActiveCmd; /* DDR2 only */
+
+ /* Parameters calculated from the extracted DIMM information */
+ MV_U32 size; /* 16,64,128,256 or 512 MByte in MB units */
+ MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit in MB units */
+ MV_U32 numberOfDevices;
+
+} MV_DIMM_INFO;
+
+
+MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo);
+MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo);
+MV_VOID dimmSpdPrint(MV_U32 dimmNum);
+MV_STATUS dimmSpdCpy(MV_VOID);
+
+#endif /* __INCmvDram */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvEth.c - Marvell's Gigabit Ethernet controller low level driver
+*
+* DESCRIPTION:
+* This file introduce OS independent APIs to Marvell's Gigabit Ethernet
+* controller. This Gigabit Ethernet Controller driver API controls
+* 1) Operations (i.e. port Init, Finish, Up, Down, PhyReset etc').
+* 2) Data flow (i.e. port Send, Receive etc').
+* 3) MAC Filtering functions (ethSetMcastAddr, ethSetRxFilterMode, etc.)
+* 4) MIB counters support (ethReadMibCounter)
+* 5) Debug functions (ethPortRegs, ethPortCounters, ethPortQueues, etc.)
+* Each Gigabit Ethernet port is controlled via ETH_PORT_CTRL struct.
+* This struct includes configuration information as well as driver
+* internal data needed for its operations.
+*
+* Supported Features:
+* - OS independent. All required OS services are implemented via external
+* OS dependent components (like osLayer or ethOsg)
+* - The user is free from Rx/Tx queue managing.
+* - Simple Gigabit Ethernet port operation API.
+* - Simple Gigabit Ethernet port data flow API.
+* - Data flow and operation API support per queue functionality.
+* - Support cached descriptors for better performance.
+* - PHY access and control API.
+* - Port Configuration API.
+* - Full control over Special and Other Multicast MAC tables.
+*
+*******************************************************************************/
+/* includes */
+#include "mvTypes.h"
+#include "mv802_3.h"
+#include "mvDebug.h"
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "eth-phy/mvEthPhy.h"
+#include "eth/mvEth.h"
+#include "eth/gbe/mvEthGbe.h"
+#include "cpu/mvCpu.h"
+
+#ifdef INCLUDE_SYNC_BARR
+#include "sys/mvCpuIf.h"
+#endif
+
+#ifdef MV_RT_DEBUG
+# define ETH_DEBUG
+#endif
+
+
+/* locals */
+MV_BOOL ethDescInSram;
+MV_BOOL ethDescSwCoher;
+
+/* This array holds the control structure of each port */
+ETH_PORT_CTRL* ethPortCtrl[MV_ETH_MAX_PORTS];
+
+/* Ethernet Port Local routines */
+
+static void ethInitRxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue);
+
+static void ethInitTxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue);
+
+static void ethSetUcastTable(int portNo, int queue);
+
+static MV_BOOL ethSetUcastAddr (int ethPortNum, MV_U8 lastNibble, int queue);
+static MV_BOOL ethSetSpecialMcastAddr(int ethPortNum, MV_U8 lastByte, int queue);
+static MV_BOOL ethSetOtherMcastAddr(int ethPortNum, MV_U8 crc8, int queue);
+
+static void ethFreeDescrMemory(ETH_PORT_CTRL* pEthPortCtrl, MV_BUF_INFO* pDescBuf);
+static MV_U8* ethAllocDescrMemory(ETH_PORT_CTRL* pEthPortCtrl, int size,
+ MV_ULONG* pPhysAddr, MV_U32 *memHandle);
+
+static MV_U32 mvEthMruGet(MV_U32 maxRxPktSize);
+
+static void mvEthPortSgmiiConfig(int port);
+
+
+
+/******************************************************************************/
+/* EthDrv Initialization functions */
+/******************************************************************************/
+
+/*******************************************************************************
+* mvEthHalInit - Initialize the Giga Ethernet unit
+*
+* DESCRIPTION:
+* This function initialize the Giga Ethernet unit.
+* 1) Configure Address decode windows of the unit
+* 2) Set registers to HW default values.
+* 3) Clear and Disable interrupts
+*
+* INPUT: NONE
+*
+* RETURN: NONE
+*
+* NOTE: this function is called once in the boot process.
+*******************************************************************************/
+void mvEthHalInit(void)
+{
+ int port;
+
+ /* Init static data structures */
+ for (port=0; port<MV_ETH_MAX_PORTS; port++)
+ {
+ ethPortCtrl[port] = NULL;
+ }
+ /* Power down all existing ports */
+ for(port=0; port<mvCtrlEthMaxPortGet(); port++)
+ {
+
+#if defined (MV78200)
+ /* Skip ports mapped to another CPU*/
+ if (MV_FALSE == mvSocUnitIsMappedToThisCpu(GIGA0+port))
+ {
+ continue;
+ }
+#endif
+
+ /* Skip power down ports */
+ if (MV_FALSE == mvCtrlPwrClckGet(ETH_GIG_UNIT_ID, port)) continue;
+
+ /* Disable Giga Ethernet Unit interrupts */
+ MV_REG_WRITE(ETH_UNIT_INTR_MASK_REG(port), 0);
+
+ /* Clear ETH_UNIT_INTR_CAUSE_REG register */
+ MV_REG_WRITE(ETH_UNIT_INTR_CAUSE_REG(port), 0);
+
+ }
+
+ mvEthMemAttrGet(ðDescInSram, ðDescSwCoher);
+
+#if defined(ETH_DESCR_IN_SRAM)
+ if(ethDescInSram == MV_FALSE)
+ {
+ mvOsPrintf("ethDrv: WARNING! Descriptors will be allocated in DRAM instead of SRAM.\n");
+ }
+#endif /* ETH_DESCR_IN_SRAM */
+}
+
+/*******************************************************************************
+* mvEthMemAttrGet - Define properties (SRAM/DRAM, SW_COHER / HW_COHER / UNCACHED)
+* of of memory location for RX and TX descriptors.
+*
+* DESCRIPTION:
+* This function allocates memory for RX and TX descriptors.
+* - If ETH_DESCR_IN_SRAM defined, allocate from SRAM memory.
+* - If ETH_DESCR_IN_SDRAM defined, allocate from SDRAM memory.
+*
+* INPUT:
+* MV_BOOL* pIsSram - place of descriptors:
+* MV_TRUE - in SRAM
+* MV_FALSE - in DRAM
+* MV_BOOL* pIsSwCoher - cache coherency of descriptors:
+* MV_TRUE - driver is responsible for cache coherency
+* MV_FALSE - driver is not responsible for cache coherency
+*
+* RETURN:
+*
+*******************************************************************************/
+void mvEthMemAttrGet(MV_BOOL* pIsSram, MV_BOOL* pIsSwCoher)
+{
+ MV_BOOL isSram, isSwCoher;
+
+ isSram = MV_FALSE;
+#if (ETHER_DRAM_COHER == MV_CACHE_COHER_SW)
+ isSwCoher = MV_TRUE;
+#else
+ isSwCoher = MV_FALSE;
+#endif
+
+#if defined(ETH_DESCR_IN_SRAM)
+ if( mvCtrlSramSizeGet() > 0)
+ {
+ isSram = MV_TRUE;
+ #if (INTEG_SRAM_COHER == MV_CACHE_COHER_SW)
+ isSwCoher = MV_TRUE;
+ #else
+ isSwCoher = MV_FALSE;
+ #endif
+ }
+#endif /* ETH_DESCR_IN_SRAM */
+
+ if(pIsSram != NULL)
+ *pIsSram = isSram;
+
+ if(pIsSwCoher != NULL)
+ *pIsSwCoher = isSwCoher;
+}
+
+
+
+/******************************************************************************/
+/* Port Initialization functions */
+/******************************************************************************/
+
+/*******************************************************************************
+* mvEthPortInit - Initialize the Ethernet port driver
+*
+* DESCRIPTION:
+* This function initialize the ethernet port.
+* 1) Allocate and initialize internal port Control structure.
+* 2) Create RX and TX descriptor rings for default RX and TX queues
+* 3) Disable RX and TX operations, clear cause registers and
+* mask all interrupts.
+* 4) Set all registers to default values and clean all MAC tables.
+*
+* INPUT:
+* int portNo - Ethernet port number
+* ETH_PORT_INIT *pEthPortInit - Ethernet port init structure
+*
+* RETURN:
+* void* - ethernet port handler, that should be passed to the most other
+* functions dealing with this port.
+*
+* NOTE: This function is called once per port when loading the eth module.
+*******************************************************************************/
+void* mvEthPortInit(int portNo, MV_ETH_PORT_INIT *pEthPortInit)
+{
+ int queue, descSize;
+ ETH_PORT_CTRL* pPortCtrl;
+
+ /* Check validity of parameters */
+ if( (portNo >= (int)mvCtrlEthMaxPortGet()) ||
+ (pEthPortInit->rxDefQ >= MV_ETH_RX_Q_NUM) ||
+ (pEthPortInit->maxRxPktSize < 1518) )
+ {
+ mvOsPrintf("EthPort #%d: Bad initialization parameters\n", portNo);
+ return NULL;
+ }
+ if( (pEthPortInit->rxDescrNum[pEthPortInit->rxDefQ]) == 0)
+ {
+ mvOsPrintf("EthPort #%d: rxDefQ (%d) must be created\n",
+ portNo, pEthPortInit->rxDefQ);
+ return NULL;
+ }
+
+ pPortCtrl = (ETH_PORT_CTRL*)mvOsMalloc( sizeof(ETH_PORT_CTRL) );
+ if(pPortCtrl == NULL)
+ {
+ mvOsPrintf("EthDrv: Can't allocate %dB for port #%d control structure!\n",
+ (int)sizeof(ETH_PORT_CTRL), portNo);
+ return NULL;
+ }
+
+ memset(pPortCtrl, 0, sizeof(ETH_PORT_CTRL) );
+ ethPortCtrl[portNo] = pPortCtrl;
+
+ pPortCtrl->portState = MV_UNDEFINED_STATE;
+
+ pPortCtrl->portNo = portNo;
+
+ pPortCtrl->osHandle = pEthPortInit->osHandle;
+
+ /* Copy Configuration parameters */
+ pPortCtrl->portConfig.maxRxPktSize = pEthPortInit->maxRxPktSize;
+ pPortCtrl->portConfig.rxDefQ = pEthPortInit->rxDefQ;
+ pPortCtrl->portConfig.ejpMode = 0;
+
+ for( queue=0; queue<MV_ETH_RX_Q_NUM; queue++ )
+ {
+ pPortCtrl->rxQueueConfig[queue].descrNum = pEthPortInit->rxDescrNum[queue];
+ }
+ for( queue=0; queue<MV_ETH_TX_Q_NUM; queue++ )
+ {
+ pPortCtrl->txQueueConfig[queue].descrNum = pEthPortInit->txDescrNum[queue];
+ }
+
+ mvEthPortDisable(pPortCtrl);
+
+ /* Set the board information regarding PHY address */
+ mvEthPhyAddrSet(pPortCtrl, mvBoardPhyAddrGet(portNo) );
+
+ /* Create all requested RX queues */
+ for(queue=0; queue<MV_ETH_RX_Q_NUM; queue++)
+ {
+ if(pPortCtrl->rxQueueConfig[queue].descrNum == 0)
+ continue;
+
+ /* Allocate memory for RX descriptors */
+ descSize = ((pPortCtrl->rxQueueConfig[queue].descrNum * ETH_RX_DESC_ALIGNED_SIZE) +
+ CPU_D_CACHE_LINE_SIZE);
+
+ pPortCtrl->rxQueue[queue].descBuf.bufVirtPtr =
+ ethAllocDescrMemory(pPortCtrl, descSize,
+ &pPortCtrl->rxQueue[queue].descBuf.bufPhysAddr,
+ &pPortCtrl->rxQueue[queue].descBuf.memHandle);
+ pPortCtrl->rxQueue[queue].descBuf.bufSize = descSize;
+ if(pPortCtrl->rxQueue[queue].descBuf.bufVirtPtr == NULL)
+ {
+ mvOsPrintf("EthPort #%d, rxQ=%d: Can't allocate %d bytes in %s for %d RX descr\n",
+ pPortCtrl->portNo, queue, descSize,
+ ethDescInSram ? "SRAM" : "DRAM",
+ pPortCtrl->rxQueueConfig[queue].descrNum);
+ return NULL;
+ }
+
+ ethInitRxDescRing(pPortCtrl, queue);
+ }
+ /* Create TX queues */
+ for(queue=0; queue<MV_ETH_TX_Q_NUM; queue++)
+ {
+ if(pPortCtrl->txQueueConfig[queue].descrNum == 0)
+ continue;
+
+ /* Allocate memory for TX descriptors */
+ descSize = ((pPortCtrl->txQueueConfig[queue].descrNum * ETH_TX_DESC_ALIGNED_SIZE) +
+ CPU_D_CACHE_LINE_SIZE);
+
+ pPortCtrl->txQueue[queue].descBuf.bufVirtPtr =
+ ethAllocDescrMemory(pPortCtrl, descSize,
+ &pPortCtrl->txQueue[queue].descBuf.bufPhysAddr,
+ &pPortCtrl->txQueue[queue].descBuf.memHandle);
+ pPortCtrl->txQueue[queue].descBuf.bufSize = descSize;
+ if(pPortCtrl->txQueue[queue].descBuf.bufVirtPtr == NULL)
+ {
+ mvOsPrintf("EthPort #%d, txQ=%d: Can't allocate %d bytes in %s for %d TX descr\n",
+ pPortCtrl->portNo, queue, descSize, ethDescInSram ? "SRAM" : "DRAM",
+ pPortCtrl->txQueueConfig[queue].descrNum);
+ return NULL;
+ }
+
+ ethInitTxDescRing(pPortCtrl, queue);
+ }
+ mvEthDefaultsSet(pPortCtrl);
+
+ pPortCtrl->portState = MV_IDLE;
+ return pPortCtrl;
+}
+
+/*******************************************************************************
+* ethPortFinish - Finish the Ethernet port driver
+*
+* DESCRIPTION:
+* This function finish the ethernet port.
+* 1) Down ethernet port if needed.
+* 2) Delete RX and TX descriptor rings for all created RX and TX queues
+* 3) Free internal port Control structure.
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet port handler
+*
+* RETURN: NONE.
+*
+*******************************************************************************/
+void mvEthPortFinish(void* pPortHndl)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ int queue, portNo = pPortCtrl->portNo;
+
+ if(pPortCtrl->portState == MV_ACTIVE)
+ {
+ mvOsPrintf("ethPort #%d: Warning !!! Finish port in Active state\n",
+ portNo);
+ mvEthPortDisable(pPortHndl);
+ }
+
+ /* Free all allocated RX queues */
+ for(queue=0; queue<MV_ETH_RX_Q_NUM; queue++)
+ {
+ ethFreeDescrMemory(pPortCtrl, &pPortCtrl->rxQueue[queue].descBuf);
+ }
+
+ /* Free all allocated TX queues */
+ for(queue=0; queue<MV_ETH_TX_Q_NUM; queue++)
+ {
+ ethFreeDescrMemory(pPortCtrl, &pPortCtrl->txQueue[queue].descBuf);
+ }
+
+ /* Free port control structure */
+ mvOsFree(pPortCtrl);
+
+ ethPortCtrl[portNo] = NULL;
+}
+
+/*******************************************************************************
+* mvEthDefaultsSet - Set defaults to the ethernet port
+*
+* DESCRIPTION:
+* This function set default values to the ethernet port.
+* 1) Clear Cause registers and Mask all interrupts
+* 2) Clear all MAC tables
+* 3) Set defaults to all registers
+* 4) Reset all created RX and TX descriptors ring
+* 5) Reset PHY
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet port handler
+*
+* RETURN: MV_STATUS
+* MV_OK - Success, Others - Failure
+* NOTE:
+* This function update all the port configuration except those set
+* Initialy by the OsGlue by MV_ETH_PORT_INIT.
+* This function can be called after portDown to return the port setting
+* to defaults.
+*******************************************************************************/
+MV_STATUS mvEthDefaultsSet(void* pPortHndl)
+{
+ int ethPortNo, queue;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ ETH_QUEUE_CTRL* pQueueCtrl;
+ MV_U32 txPrio;
+ MV_U32 portCfgReg, portCfgExtReg, portSerialCtrlReg, portSerialCtrl1Reg, portSdmaCfgReg;
+ MV_BOARD_MAC_SPEED boardMacCfg;
+
+ ethPortNo = pPortCtrl->portNo;
+
+ /* Clear Cause registers */
+ MV_REG_WRITE(ETH_INTR_CAUSE_REG(ethPortNo),0);
+ MV_REG_WRITE(ETH_INTR_CAUSE_EXT_REG(ethPortNo),0);
+
+ /* Mask all interrupts */
+ MV_REG_WRITE(ETH_INTR_MASK_REG(ethPortNo),0);
+ MV_REG_WRITE(ETH_INTR_MASK_EXT_REG(ethPortNo),0);
+
+ portCfgReg = PORT_CONFIG_VALUE;
+ portCfgExtReg = PORT_CONFIG_EXTEND_VALUE;
+
+ boardMacCfg = mvBoardMacSpeedGet(ethPortNo);
+
+ if(boardMacCfg == BOARD_MAC_SPEED_100M)
+ {
+ portSerialCtrlReg = PORT_SERIAL_CONTROL_100MB_FORCE_VALUE;
+ }
+ else if(boardMacCfg == BOARD_MAC_SPEED_1000M)
+ {
+ portSerialCtrlReg = PORT_SERIAL_CONTROL_1000MB_FORCE_VALUE;
+ }
+ else
+ {
+ portSerialCtrlReg = PORT_SERIAL_CONTROL_VALUE;
+ }
+
+ /* build PORT_SDMA_CONFIG_REG */
+ portSdmaCfgReg = ETH_TX_INTR_COAL_MASK(0);
+ portSdmaCfgReg |= ETH_TX_BURST_SIZE_MASK(ETH_BURST_SIZE_16_64BIT_VALUE);
+
+#if ( (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB) || \
+ (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT) )
+ /* some devices have restricted RX burst size when using HW coherency */
+ portSdmaCfgReg |= ETH_RX_BURST_SIZE_MASK(ETH_BURST_SIZE_4_64BIT_VALUE);
+#else
+ portSdmaCfgReg |= ETH_RX_BURST_SIZE_MASK(ETH_BURST_SIZE_16_64BIT_VALUE);
+#endif
+
+#if defined(MV_CPU_BE)
+ /* big endian */
+# if defined(MV_ARM)
+ portSdmaCfgReg |= (ETH_RX_NO_DATA_SWAP_MASK |
+ ETH_TX_NO_DATA_SWAP_MASK |
+ ETH_DESC_SWAP_MASK);
+# elif defined(MV_PPC)
+ portSdmaCfgReg |= (ETH_RX_DATA_SWAP_MASK |
+ ETH_TX_DATA_SWAP_MASK |
+ ETH_NO_DESC_SWAP_MASK);
+# else
+# error "Giga Ethernet Swap policy is not defined for the CPU_ARCH"
+# endif /* MV_ARM / MV_PPC */
+
+#else /* MV_CPU_LE */
+ /* little endian */
+ portSdmaCfgReg |= (ETH_RX_NO_DATA_SWAP_MASK |
+ ETH_TX_NO_DATA_SWAP_MASK |
+ ETH_NO_DESC_SWAP_MASK);
+#endif /* MV_CPU_BE / MV_CPU_LE */
+
+ pPortCtrl->portRxQueueCmdReg = 0;
+ pPortCtrl->portTxQueueCmdReg = 0;
+
+#if (MV_ETH_VERSION >= 4)
+ if(pPortCtrl->portConfig.ejpMode == MV_TRUE)
+ {
+ MV_REG_WRITE(ETH_TXQ_CMD_1_REG(ethPortNo), ETH_TX_EJP_ENABLE_MASK);
+ }
+ else
+ {
+ MV_REG_WRITE(ETH_TXQ_CMD_1_REG(ethPortNo), 0)
+ }
+#endif /* (MV_ETH_VERSION >= 4) */
+
+ ethSetUcastTable(ethPortNo, -1);
+ mvEthSetSpecialMcastTable(ethPortNo, -1);
+ mvEthSetOtherMcastTable(ethPortNo, -1);
+
+ portSerialCtrlReg &= ~ETH_MAX_RX_PACKET_SIZE_MASK;
+
+ portSerialCtrlReg |= mvEthMruGet(pPortCtrl->portConfig.maxRxPktSize);
+
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNo), portSerialCtrlReg);
+
+ /* Update value of PortConfig register accordingly with all RxQueue types */
+ pPortCtrl->portConfig.rxArpQ = pPortCtrl->portConfig.rxDefQ;
+ pPortCtrl->portConfig.rxBpduQ = pPortCtrl->portConfig.rxDefQ;
+ pPortCtrl->portConfig.rxTcpQ = pPortCtrl->portConfig.rxDefQ;
+ pPortCtrl->portConfig.rxUdpQ = pPortCtrl->portConfig.rxDefQ;
+
+ portCfgReg &= ~ETH_DEF_RX_QUEUE_ALL_MASK;
+ portCfgReg |= ETH_DEF_RX_QUEUE_MASK(pPortCtrl->portConfig.rxDefQ);
+
+ portCfgReg &= ~ETH_DEF_RX_ARP_QUEUE_ALL_MASK;
+ portCfgReg |= ETH_DEF_RX_ARP_QUEUE_MASK(pPortCtrl->portConfig.rxArpQ);
+
+ portCfgReg &= ~ETH_DEF_RX_BPDU_QUEUE_ALL_MASK;
+ portCfgReg |= ETH_DEF_RX_BPDU_QUEUE_MASK(pPortCtrl->portConfig.rxBpduQ);
+
+ portCfgReg &= ~ETH_DEF_RX_TCP_QUEUE_ALL_MASK;
+ portCfgReg |= ETH_DEF_RX_TCP_QUEUE_MASK(pPortCtrl->portConfig.rxTcpQ);
+
+ portCfgReg &= ~ETH_DEF_RX_UDP_QUEUE_ALL_MASK;
+ portCfgReg |= ETH_DEF_RX_UDP_QUEUE_MASK(pPortCtrl->portConfig.rxUdpQ);
+
+ /* Assignment of Tx CTRP of given queue */
+ txPrio = 0;
+
+ for(queue=0; queue<MV_ETH_TX_Q_NUM; queue++)
+ {
+ pQueueCtrl = &pPortCtrl->txQueue[queue];
+
+ if(pQueueCtrl->pFirstDescr != NULL)
+ {
+ ethResetTxDescRing(pPortCtrl, queue);
+
+ MV_REG_WRITE(ETH_TXQ_TOKEN_COUNT_REG(ethPortNo, queue),
+ 0x3fffffff);
+ MV_REG_WRITE(ETH_TXQ_TOKEN_CFG_REG(ethPortNo, queue),
+ 0x03ffffff);
+ }
+ else
+ {
+ MV_REG_WRITE(ETH_TXQ_TOKEN_COUNT_REG(ethPortNo, queue), 0x0);
+ MV_REG_WRITE(ETH_TXQ_TOKEN_CFG_REG(ethPortNo, queue), 0x0);
+ }
+ }
+
+ /* Assignment of Rx CRDP of given queue */
+ for(queue=0; queue<MV_ETH_RX_Q_NUM; queue++)
+ {
+ ethResetRxDescRing(pPortCtrl, queue);
+ }
+
+ /* Allow receiving packes with odd number of preamble nibbles */
+ portSerialCtrl1Reg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(ethPortNo));
+ portSerialCtrl1Reg |= ETH_EN_MII_ODD_PRE_MASK;
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(ethPortNo), portSerialCtrl1Reg);
+
+ /* Assign port configuration and command. */
+ MV_REG_WRITE(ETH_PORT_CONFIG_REG(ethPortNo), portCfgReg);
+
+ MV_REG_WRITE(ETH_PORT_CONFIG_EXTEND_REG(ethPortNo), portCfgExtReg);
+
+ /* Assign port SDMA configuration */
+ MV_REG_WRITE(ETH_SDMA_CONFIG_REG(ethPortNo), portSdmaCfgReg);
+
+ /* Turn off the port/queue bandwidth limitation */
+ MV_REG_WRITE(ETH_MAX_TRANSMIT_UNIT_REG(ethPortNo), 0x0);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* ethPortUp - Start the Ethernet port RX and TX activity.
+*
+* DESCRIPTION:
+* This routine start Rx and Tx activity:
+*
+* Note: Each Rx and Tx queue descriptor's list must be initialized prior
+* to calling this function (use etherInitTxDescRing for Tx queues and
+* etherInitRxDescRing for Rx queues).
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet port handler
+*
+* RETURN: MV_STATUS
+* MV_OK - Success, Others - Failure.
+*
+* NOTE : used for port link up.
+*******************************************************************************/
+MV_STATUS mvEthPortUp(void* pEthPortHndl)
+{
+ int ethPortNo;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+
+ ethPortNo = pPortCtrl->portNo;
+
+ if( (pPortCtrl->portState != MV_ACTIVE) &&
+ (pPortCtrl->portState != MV_PAUSED) )
+ {
+ mvOsPrintf("ethDrv port%d: Unexpected port state %d\n",
+ ethPortNo, pPortCtrl->portState);
+ return MV_BAD_STATE;
+ }
+
+ ethPortNo = pPortCtrl->portNo;
+
+ /* Enable port RX. */
+ MV_REG_WRITE(ETH_RX_QUEUE_COMMAND_REG(ethPortNo), pPortCtrl->portRxQueueCmdReg);
+
+ /* Enable port TX. */
+ MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(ethPortNo)) = pPortCtrl->portTxQueueCmdReg;
+
+ pPortCtrl->portState = MV_ACTIVE;
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* ethPortDown - Stop the Ethernet port activity.
+*
+* DESCRIPTION:
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet port handler
+*
+* RETURN: MV_STATUS
+* MV_OK - Success, Others - Failure.
+*
+* NOTE : used for port link down.
+*******************************************************************************/
+MV_STATUS mvEthPortDown(void* pEthPortHndl)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+ int ethPortNum = pPortCtrl->portNo;
+ unsigned int regData;
+ volatile int uDelay, mDelay;
+
+ /* Stop Rx port activity. Check port Rx activity. */
+ regData = (MV_REG_READ(ETH_RX_QUEUE_COMMAND_REG(ethPortNum))) & ETH_RXQ_ENABLE_MASK;
+ if(regData != 0)
+ {
+ /* Issue stop command for active channels only */
+ MV_REG_WRITE(ETH_RX_QUEUE_COMMAND_REG(ethPortNum), (regData << ETH_RXQ_DISABLE_OFFSET));
+ }
+
+ /* Stop Tx port activity. Check port Tx activity. */
+ regData = (MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(ethPortNum))) & ETH_TXQ_ENABLE_MASK;
+ if(regData != 0)
+ {
+ /* Issue stop command for active channels only */
+ MV_REG_WRITE(ETH_TX_QUEUE_COMMAND_REG(ethPortNum),
+ (regData << ETH_TXQ_DISABLE_OFFSET) );
+ }
+
+ /* Force link down */
+/*
+ regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum));
+ regData &= ~(ETH_DO_NOT_FORCE_LINK_FAIL_MASK);
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData);
+*/
+ /* Wait for all Rx activity to terminate. */
+ mDelay = 0;
+ do
+ {
+ if(mDelay >= RX_DISABLE_TIMEOUT_MSEC)
+ {
+ mvOsPrintf("ethPort_%d: TIMEOUT for RX stopped !!! rxQueueCmd - 0x08%x\n",
+ ethPortNum, regData);
+ break;
+ }
+ mvOsDelay(1);
+ mDelay++;
+
+ /* Check port RX Command register that all Rx queues are stopped */
+ regData = MV_REG_READ(ETH_RX_QUEUE_COMMAND_REG(ethPortNum));
+ }
+ while(regData & 0xFF);
+
+ /* Wait for all Tx activity to terminate. */
+ mDelay = 0;
+ do
+ {
+ if(mDelay >= TX_DISABLE_TIMEOUT_MSEC)
+ {
+ mvOsPrintf("ethPort_%d: TIMEOUT for TX stoped !!! txQueueCmd - 0x08%x\n",
+ ethPortNum, regData);
+ break;
+ }
+ mvOsDelay(1);
+ mDelay++;
+
+ /* Check port TX Command register that all Tx queues are stopped */
+ regData = MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(ethPortNum));
+ }
+ while(regData & 0xFF);
+
+ /* Double check to Verify that TX FIFO is Empty */
+ mDelay = 0;
+ while(MV_TRUE)
+ {
+ do
+ {
+ if(mDelay >= TX_FIFO_EMPTY_TIMEOUT_MSEC)
+ {
+ mvOsPrintf("\n ethPort_%d: TIMEOUT for TX FIFO empty !!! portStatus - 0x08%x\n",
+ ethPortNum, regData);
+ break;
+ }
+ mvOsDelay(1);
+ mDelay++;
+
+ regData = MV_REG_READ(ETH_PORT_STATUS_REG(ethPortNum));
+ }
+ while( ((regData & ETH_TX_FIFO_EMPTY_MASK) == 0) ||
+ ((regData & ETH_TX_IN_PROGRESS_MASK) != 0) );
+
+ if(mDelay >= TX_FIFO_EMPTY_TIMEOUT_MSEC)
+ break;
+
+ /* Double check */
+ regData = MV_REG_READ(ETH_PORT_STATUS_REG(ethPortNum));
+ if( ((regData & ETH_TX_FIFO_EMPTY_MASK) != 0) &&
+ ((regData & ETH_TX_IN_PROGRESS_MASK) == 0) )
+ {
+ break;
+ }
+ else
+ mvOsPrintf("ethPort_%d: TX FIFO Empty double check failed. %d msec, portStatus=0x%x\n",
+ ethPortNum, mDelay, regData);
+ }
+
+ /* Do NOT force link down */
+/*
+ regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum));
+ regData |= (ETH_DO_NOT_FORCE_LINK_FAIL_MASK);
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData);
+*/
+ /* Wait about 2500 tclk cycles */
+ uDelay = (PORT_DISABLE_WAIT_TCLOCKS/(mvBoardTclkGet()/1000000));
+ mvOsUDelay(uDelay);
+
+ pPortCtrl->portState = MV_PAUSED;
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* ethPortEnable - Enable the Ethernet port and Start RX and TX.
+*
+* DESCRIPTION:
+* This routine enable the Ethernet port and Rx and Tx activity:
+*
+* Note: Each Rx and Tx queue descriptor's list must be initialized prior
+* to calling this function (use etherInitTxDescRing for Tx queues and
+* etherInitRxDescRing for Rx queues).
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet port handler
+*
+* RETURN: MV_STATUS
+* MV_OK - Success, Others - Failure.
+*
+* NOTE: main usage is to enable the port after ifconfig up.
+*******************************************************************************/
+MV_STATUS mvEthPortEnable(void* pEthPortHndl)
+{
+ int ethPortNo;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+ MV_U32 portSerialCtrlReg;
+
+ ethPortNo = pPortCtrl->portNo;
+
+ /* Enable port */
+ portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNo));
+ portSerialCtrlReg |= (ETH_DO_NOT_FORCE_LINK_FAIL_MASK | ETH_PORT_ENABLE_MASK);
+
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNo), portSerialCtrlReg);
+
+ mvEthMibCountersClear(pEthPortHndl);
+
+ pPortCtrl->portState = MV_PAUSED;
+
+ /* If Link is UP, Start RX and TX traffic */
+ if( MV_REG_READ( ETH_PORT_STATUS_REG(ethPortNo) ) & ETH_LINK_UP_MASK)
+ return( mvEthPortUp(pEthPortHndl) );
+
+ return MV_NOT_READY;
+}
+
+
+/*******************************************************************************
+* mvEthPortDisable - Stop RX and TX activities and Disable the Ethernet port.
+*
+* DESCRIPTION:
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet port handler
+*
+* RETURN: MV_STATUS
+* MV_OK - Success, Others - Failure.
+*
+* NOTE: main usage is to disable the port after ifconfig down.
+*******************************************************************************/
+MV_STATUS mvEthPortDisable(void* pEthPortHndl)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+ int ethPortNum = pPortCtrl->portNo;
+ unsigned int regData;
+ volatile int mvDelay;
+
+ if(pPortCtrl->portState == MV_ACTIVE)
+ {
+ /* Stop RX and TX activities */
+ mvEthPortDown(pEthPortHndl);
+ }
+
+ /* Reset the Enable bit in the Serial Control Register */
+ regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum));
+ regData &= ~(ETH_PORT_ENABLE_MASK);
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData);
+
+ /* Wait about 2500 tclk cycles */
+ mvDelay = (PORT_DISABLE_WAIT_TCLOCKS*(mvCpuPclkGet()/mvBoardTclkGet()));
+ for(mvDelay; mvDelay>0; mvDelay--);
+
+ pPortCtrl->portState = MV_IDLE;
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthPortForceTxDone - Get next buffer from TX queue in spite of buffer ownership.
+*
+* DESCRIPTION:
+* This routine used to free buffers attached to the Tx ring and should
+* be called only when Giga Ethernet port is Down
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet Port handler.
+* int txQueue - Number of TX queue.
+*
+* OUTPUT:
+* MV_PKT_INFO *pPktInfo - Pointer to packet was sent.
+*
+* RETURN:
+* MV_EMPTY - There is no more buffers in this queue.
+* MV_OK - Buffer detached from the queue and pPktInfo structure
+* filled with relevant information.
+*
+*******************************************************************************/
+MV_PKT_INFO* mvEthPortForceTxDone(void* pEthPortHndl, int txQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+ ETH_QUEUE_CTRL* pQueueCtrl;
+ MV_PKT_INFO* pPktInfo;
+ ETH_TX_DESC* pTxDesc;
+ int port = pPortCtrl->portNo;
+
+ pQueueCtrl = &pPortCtrl->txQueue[txQueue];
+
+ while( (pQueueCtrl->pUsedDescr != pQueueCtrl->pCurrentDescr) ||
+ (pQueueCtrl->resource == 0) )
+ {
+ /* Free next descriptor */
+ pQueueCtrl->resource++;
+ pTxDesc = (ETH_TX_DESC*)pQueueCtrl->pUsedDescr;
+
+ /* pPktInfo is available only in descriptors which are last descriptors */
+ pPktInfo = (MV_PKT_INFO*)pTxDesc->returnInfo;
+ if (pPktInfo)
+ pPktInfo->status = pTxDesc->cmdSts;
+
+ pTxDesc->cmdSts = 0x0;
+ pTxDesc->returnInfo = 0x0;
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pTxDesc);
+
+ pQueueCtrl->pUsedDescr = TX_NEXT_DESC_PTR(pTxDesc, pQueueCtrl);
+
+ if (pPktInfo)
+ if (pPktInfo->status & ETH_TX_LAST_DESC_MASK)
+ return pPktInfo;
+ }
+ MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(port, txQueue),
+ (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) );
+ return NULL;
+}
+
+
+
+/*******************************************************************************
+* mvEthPortForceRx - Get next buffer from RX queue in spite of buffer ownership.
+*
+* DESCRIPTION:
+* This routine used to free buffers attached to the Rx ring and should
+* be called only when Giga Ethernet port is Down
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet Port handler.
+* int rxQueue - Number of Rx queue.
+*
+* OUTPUT:
+* MV_PKT_INFO *pPktInfo - Pointer to received packet.
+*
+* RETURN:
+* MV_EMPTY - There is no more buffers in this queue.
+* MV_OK - Buffer detached from the queue and pBufInfo structure
+* filled with relevant information.
+*
+*******************************************************************************/
+MV_PKT_INFO* mvEthPortForceRx(void* pEthPortHndl, int rxQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+ ETH_QUEUE_CTRL* pQueueCtrl;
+ ETH_RX_DESC* pRxDesc;
+ MV_PKT_INFO* pPktInfo;
+ int port = pPortCtrl->portNo;
+
+ pQueueCtrl = &pPortCtrl->rxQueue[rxQueue];
+
+ if(pQueueCtrl->resource == 0)
+ {
+ MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(port, rxQueue),
+ (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) );
+
+ return NULL;
+ }
+ /* Free next descriptor */
+ pQueueCtrl->resource--;
+ pRxDesc = (ETH_RX_DESC*)pQueueCtrl->pCurrentDescr;
+ pPktInfo = (MV_PKT_INFO*)pRxDesc->returnInfo;
+
+ pPktInfo->status = pRxDesc->cmdSts;
+ pRxDesc->cmdSts = 0x0;
+ pRxDesc->returnInfo = 0x0;
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pRxDesc);
+
+ pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxDesc, pQueueCtrl);
+ return pPktInfo;
+}
+
+
+/******************************************************************************/
+/* Port Configuration functions */
+/******************************************************************************/
+/*******************************************************************************
+* mvEthMruGet - Get MRU configuration for Max Rx packet size.
+*
+* INPUT:
+* MV_U32 maxRxPktSize - max packet size.
+*
+* RETURN: MV_U32 - MRU configuration.
+*
+*******************************************************************************/
+static MV_U32 mvEthMruGet(MV_U32 maxRxPktSize)
+{
+ MV_U32 portSerialCtrlReg = 0;
+
+ if(maxRxPktSize > 9192)
+ portSerialCtrlReg |= ETH_MAX_RX_PACKET_9700BYTE;
+ else if(maxRxPktSize > 9022)
+ portSerialCtrlReg |= ETH_MAX_RX_PACKET_9192BYTE;
+ else if(maxRxPktSize > 1552)
+ portSerialCtrlReg |= ETH_MAX_RX_PACKET_9022BYTE;
+ else if(maxRxPktSize > 1522)
+ portSerialCtrlReg |= ETH_MAX_RX_PACKET_1552BYTE;
+ else if(maxRxPktSize > 1518)
+ portSerialCtrlReg |= ETH_MAX_RX_PACKET_1522BYTE;
+ else
+ portSerialCtrlReg |= ETH_MAX_RX_PACKET_1518BYTE;
+
+ return portSerialCtrlReg;
+}
+
+/*******************************************************************************
+* mvEthRxCoalSet - Sets coalescing interrupt mechanism on RX path
+*
+* DESCRIPTION:
+* This routine sets the RX coalescing interrupt mechanism parameter.
+* This parameter is a timeout counter, that counts in 64 tClk
+* chunks, that when timeout event occurs a maskable interrupt occurs.
+* The parameter is calculated using the tCLK frequency of the
+* MV-64xxx chip, and the required number is in micro seconds.
+*
+* INPUT:
+* void* pPortHndl - Ethernet Port handler.
+* MV_U32 uSec - Number of micro seconds between
+* RX interrupts
+*
+* RETURN:
+* None.
+*
+* COMMENT:
+* 1 sec - TCLK_RATE clocks
+* 1 uSec - TCLK_RATE / 1,000,000 clocks
+*
+* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64)
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_U32 mvEthRxCoalSet (void* pPortHndl, MV_U32 uSec)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ MV_U32 coal = ((uSec * (mvBoardTclkGet() / 1000000)) / 64);
+ MV_U32 portSdmaCfgReg;
+
+ portSdmaCfgReg = MV_REG_READ(ETH_SDMA_CONFIG_REG(pPortCtrl->portNo));
+ portSdmaCfgReg &= ~ETH_RX_INTR_COAL_ALL_MASK;
+
+ portSdmaCfgReg |= ETH_RX_INTR_COAL_MASK(coal);
+
+#if (MV_ETH_VERSION >= 2)
+ /* Set additional bit if needed ETH_RX_INTR_COAL_MSB_BIT (25) */
+ if(ETH_RX_INTR_COAL_MASK(coal) > ETH_RX_INTR_COAL_ALL_MASK)
+ portSdmaCfgReg |= ETH_RX_INTR_COAL_MSB_MASK;
+#endif /* MV_ETH_VERSION >= 2 */
+
+ MV_REG_WRITE (ETH_SDMA_CONFIG_REG(pPortCtrl->portNo), portSdmaCfgReg);
+ return coal;
+}
+
+/*******************************************************************************
+* mvEthTxCoalSet - Sets coalescing interrupt mechanism on TX path
+*
+* DESCRIPTION:
+* This routine sets the TX coalescing interrupt mechanism parameter.
+* This parameter is a timeout counter, that counts in 64 tClk
+* chunks, that when timeout event occurs a maskable interrupt
+* occurs.
+* The parameter is calculated using the tCLK frequency of the
+* MV-64xxx chip, and the required number is in micro seconds.
+*
+* INPUT:
+* void* pPortHndl - Ethernet Port handler.
+* MV_U32 uSec - Number of micro seconds between
+* RX interrupts
+*
+* RETURN:
+* None.
+*
+* COMMENT:
+* 1 sec - TCLK_RATE clocks
+* 1 uSec - TCLK_RATE / 1,000,000 clocks
+*
+* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64)
+*
+*******************************************************************************/
+MV_U32 mvEthTxCoalSet(void* pPortHndl, MV_U32 uSec)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ MV_U32 coal = ((uSec * (mvBoardTclkGet() / 1000000)) / 64);
+ MV_U32 regVal;
+
+ regVal = MV_REG_READ(ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo));
+ regVal &= ~ETH_TX_INTR_COAL_ALL_MASK;
+ regVal |= ETH_TX_INTR_COAL_MASK(coal);
+
+ /* Set TX Coalescing mechanism */
+ MV_REG_WRITE (ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo), regVal);
+ return coal;
+}
+
+/*******************************************************************************
+* mvEthCoalGet - Gets RX and TX coalescing values in micro seconds
+*
+* DESCRIPTION:
+* This routine gets the RX and TX coalescing interrupt values.
+* The parameter is calculated using the tCLK frequency of the
+* MV-64xxx chip, and the returned numbers are in micro seconds.
+*
+* INPUTs:
+* void* pPortHndl - Ethernet Port handler.
+*
+* OUTPUTs:
+* MV_U32* pRxCoal - Number of micro seconds between RX interrupts
+* MV_U32* pTxCoal - Number of micro seconds between TX interrupts
+*
+* RETURN:
+* MV_STATUS MV_OK - success
+* Others - failure.
+*
+* COMMENT:
+* 1 sec - TCLK_RATE clocks
+* 1 uSec - TCLK_RATE / 1,000,000 clocks
+*
+* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64)
+*
+*******************************************************************************/
+MV_STATUS mvEthCoalGet(void* pPortHndl, MV_U32* pRxCoal, MV_U32* pTxCoal)
+{
+ MV_U32 regVal, coal, usec;
+
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+ /* get TX Coalescing */
+ regVal = MV_REG_READ (ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo));
+ coal = ((regVal & ETH_TX_INTR_COAL_ALL_MASK) >> ETH_TX_INTR_COAL_OFFSET);
+
+ usec = (coal * 64) / (mvBoardTclkGet() / 1000000);
+ if(pTxCoal != NULL)
+ *pTxCoal = usec;
+
+ /* Get RX Coalescing */
+ regVal = MV_REG_READ(ETH_SDMA_CONFIG_REG(pPortCtrl->portNo));
+ coal = ((regVal & ETH_RX_INTR_COAL_ALL_MASK) >> ETH_RX_INTR_COAL_OFFSET);
+
+#if (MV_ETH_VERSION >= 2)
+ if(regVal & ETH_RX_INTR_COAL_MSB_MASK)
+ {
+ /* Add MSB */
+ coal |= (ETH_RX_INTR_COAL_ALL_MASK + 1);
+ }
+#endif /* MV_ETH_VERSION >= 2 */
+
+ usec = (coal * 64) / (mvBoardTclkGet() / 1000000);
+ if(pRxCoal != NULL)
+ *pRxCoal = usec;
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthMaxRxSizeSet -
+*
+* DESCRIPTION:
+* Change maximum receive size of the port. This configuration will take place
+* after next call of ethPortSetDefaults() function.
+*
+* INPUT:
+*
+* RETURN:
+*******************************************************************************/
+MV_STATUS mvEthMaxRxSizeSet(void* pPortHndl, int maxRxSize)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ MV_U32 portSerialCtrlReg;
+
+ if((maxRxSize < 1518) || (maxRxSize & ~ETH_RX_BUFFER_MASK))
+ return MV_BAD_PARAM;
+
+ pPortCtrl->portConfig.maxRxPktSize = maxRxSize;
+
+ portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(pPortCtrl->portNo));
+ portSerialCtrlReg &= ~ETH_MAX_RX_PACKET_SIZE_MASK;
+ portSerialCtrlReg |= mvEthMruGet(pPortCtrl->portConfig.maxRxPktSize);
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(pPortCtrl->portNo), portSerialCtrlReg);
+
+ return MV_OK;
+}
+
+
+/******************************************************************************/
+/* MAC Filtering functions */
+/******************************************************************************/
+
+/*******************************************************************************
+* mvEthRxFilterModeSet - Configure Fitering mode of Ethernet port
+*
+* DESCRIPTION:
+* This routine used to free buffers attached to the Rx ring and should
+* be called only when Giga Ethernet port is Down
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet Port handler.
+* MV_BOOL isPromisc - Promiscous mode
+* MV_TRUE - accept all Broadcast, Multicast
+* and Unicast packets
+* MV_FALSE - accept all Broadcast,
+* specially added Multicast and
+* single Unicast packets
+*
+* RETURN: MV_STATUS MV_OK - Success, Other - Failure
+*
+*******************************************************************************/
+MV_STATUS mvEthRxFilterModeSet(void* pEthPortHndl, MV_BOOL isPromisc)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+ int queue;
+ MV_U32 portCfgReg;
+
+ portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo));
+ /* Set / Clear UPM bit in port configuration register */
+ if(isPromisc)
+ {
+ /* Accept all multicast packets to RX default queue */
+ queue = pPortCtrl->portConfig.rxDefQ;
+ portCfgReg |= ETH_UNICAST_PROMISCUOUS_MODE_MASK;
+ memset(pPortCtrl->mcastCount, 1, sizeof(pPortCtrl->mcastCount));
+ MV_REG_WRITE(ETH_MAC_ADDR_LOW_REG(pPortCtrl->portNo),0xFFFF);
+ MV_REG_WRITE(ETH_MAC_ADDR_HIGH_REG(pPortCtrl->portNo),0xFFFFFFFF);
+ }
+ else
+ {
+ /* Reject all Multicast addresses */
+ queue = -1;
+ portCfgReg &= ~ETH_UNICAST_PROMISCUOUS_MODE_MASK;
+ /* Clear all mcastCount */
+ memset(pPortCtrl->mcastCount, 0, sizeof(pPortCtrl->mcastCount));
+ }
+ MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg);
+
+ /* Set Special Multicast and Other Multicast tables */
+ mvEthSetSpecialMcastTable(pPortCtrl->portNo, queue);
+ mvEthSetOtherMcastTable(pPortCtrl->portNo, queue);
+ ethSetUcastTable(pPortCtrl->portNo, queue);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthMacAddrSet - This function Set the port Unicast address.
+*
+* DESCRIPTION:
+* This function Set the port Ethernet MAC address. This address
+* will be used to send Pause frames if enabled. Packets with this
+* address will be accepted and dispatched to default RX queue
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet port handler.
+* char* pAddr - Address to be set
+*
+* RETURN: MV_STATUS
+* MV_OK - Success, Other - Faulure
+*
+*******************************************************************************/
+MV_STATUS mvEthMacAddrSet(void* pPortHndl, unsigned char *pAddr, int queue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ unsigned int macH;
+ unsigned int macL;
+
+ if(queue >= MV_ETH_RX_Q_NUM)
+ {
+ mvOsPrintf("ethDrv: RX queue #%d is out of range\n", queue);
+ return MV_BAD_PARAM;
+ }
+
+ if(queue != -1)
+ {
+ macL = (pAddr[4] << 8) | (pAddr[5]);
+ macH = (pAddr[0] << 24)| (pAddr[1] << 16) |
+ (pAddr[2] << 8) | (pAddr[3] << 0);
+
+ MV_REG_WRITE(ETH_MAC_ADDR_LOW_REG(pPortCtrl->portNo), macL);
+ MV_REG_WRITE(ETH_MAC_ADDR_HIGH_REG(pPortCtrl->portNo), macH);
+ }
+
+ /* Accept frames of this address */
+ ethSetUcastAddr(pPortCtrl->portNo, pAddr[5], queue);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthMacAddrGet - This function returns the port Unicast address.
+*
+* DESCRIPTION:
+* This function returns the port Ethernet MAC address.
+*
+* INPUT:
+* int portNo - Ethernet port number.
+* char* pAddr - Pointer where address will be written to
+*
+* RETURN: MV_STATUS
+* MV_OK - Success, Other - Faulure
+*
+*******************************************************************************/
+MV_STATUS mvEthMacAddrGet(int portNo, unsigned char *pAddr)
+{
+ unsigned int macH;
+ unsigned int macL;
+
+ if(pAddr == NULL)
+ {
+ mvOsPrintf("mvEthMacAddrGet: NULL pointer.\n");
+ return MV_BAD_PARAM;
+ }
+
+ macH = MV_REG_READ(ETH_MAC_ADDR_HIGH_REG(portNo));
+ macL = MV_REG_READ(ETH_MAC_ADDR_LOW_REG(portNo));
+ pAddr[0] = (macH >> 24) & 0xff;
+ pAddr[1] = (macH >> 16) & 0xff;
+ pAddr[2] = (macH >> 8) & 0xff;
+ pAddr[3] = macH & 0xff;
+ pAddr[4] = (macL >> 8) & 0xff;
+ pAddr[5] = macL & 0xff;
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthMcastCrc8Get - Calculate CRC8 of MAC address.
+*
+* DESCRIPTION:
+*
+* INPUT:
+* MV_U8* pAddr - Address to calculate CRC-8
+*
+* RETURN: MV_U8 - CRC-8 of this MAC address
+*
+*******************************************************************************/
+MV_U8 mvEthMcastCrc8Get(MV_U8* pAddr)
+{
+ unsigned int macH;
+ unsigned int macL;
+ int macArray[48];
+ int crc[8];
+ int i;
+ unsigned char crcResult = 0;
+
+ /* Calculate CRC-8 out of the given address */
+ macH = (pAddr[0] << 8) | (pAddr[1]);
+ macL = (pAddr[2] << 24)| (pAddr[3] << 16) |
+ (pAddr[4] << 8) | (pAddr[5] << 0);
+
+ for(i=0; i<32; i++)
+ macArray[i] = (macL >> i) & 0x1;
+
+ for(i=32; i<48; i++)
+ macArray[i] = (macH >> (i - 32)) & 0x1;
+
+ crc[0] = macArray[45] ^ macArray[43] ^ macArray[40] ^ macArray[39] ^
+ macArray[35] ^ macArray[34] ^ macArray[31] ^ macArray[30] ^
+ macArray[28] ^ macArray[23] ^ macArray[21] ^ macArray[19] ^
+ macArray[18] ^ macArray[16] ^ macArray[14] ^ macArray[12] ^
+ macArray[8] ^ macArray[7] ^ macArray[6] ^ macArray[0];
+
+ crc[1] = macArray[46] ^ macArray[45] ^ macArray[44] ^ macArray[43] ^
+ macArray[41] ^ macArray[39] ^ macArray[36] ^ macArray[34] ^
+ macArray[32] ^ macArray[30] ^ macArray[29] ^ macArray[28] ^
+ macArray[24] ^ macArray[23] ^ macArray[22] ^ macArray[21] ^
+ macArray[20] ^ macArray[18] ^ macArray[17] ^ macArray[16] ^
+ macArray[15] ^ macArray[14] ^ macArray[13] ^ macArray[12] ^
+ macArray[9] ^ macArray[6] ^ macArray[1] ^ macArray[0];
+
+ crc[2] = macArray[47] ^ macArray[46] ^ macArray[44] ^ macArray[43] ^
+ macArray[42] ^ macArray[39] ^ macArray[37] ^ macArray[34] ^
+ macArray[33] ^ macArray[29] ^ macArray[28] ^ macArray[25] ^
+ macArray[24] ^ macArray[22] ^ macArray[17] ^ macArray[15] ^
+ macArray[13] ^ macArray[12] ^ macArray[10] ^ macArray[8] ^
+ macArray[6] ^ macArray[2] ^ macArray[1] ^ macArray[0];
+
+ crc[3] = macArray[47] ^ macArray[45] ^ macArray[44] ^ macArray[43] ^
+ macArray[40] ^ macArray[38] ^ macArray[35] ^ macArray[34] ^
+ macArray[30] ^ macArray[29] ^ macArray[26] ^ macArray[25] ^
+ macArray[23] ^ macArray[18] ^ macArray[16] ^ macArray[14] ^
+ macArray[13] ^ macArray[11] ^ macArray[9] ^ macArray[7] ^
+ macArray[3] ^ macArray[2] ^ macArray[1];
+
+ crc[4] = macArray[46] ^ macArray[45] ^ macArray[44] ^ macArray[41] ^
+ macArray[39] ^ macArray[36] ^ macArray[35] ^ macArray[31] ^
+ macArray[30] ^ macArray[27] ^ macArray[26] ^ macArray[24] ^
+ macArray[19] ^ macArray[17] ^ macArray[15] ^ macArray[14] ^
+ macArray[12] ^ macArray[10] ^ macArray[8] ^ macArray[4] ^
+ macArray[3] ^ macArray[2];
+
+ crc[5] = macArray[47] ^ macArray[46] ^ macArray[45] ^ macArray[42] ^
+ macArray[40] ^ macArray[37] ^ macArray[36] ^ macArray[32] ^
+ macArray[31] ^ macArray[28] ^ macArray[27] ^ macArray[25] ^
+ macArray[20] ^ macArray[18] ^ macArray[16] ^ macArray[15] ^
+ macArray[13] ^ macArray[11] ^ macArray[9] ^ macArray[5] ^
+ macArray[4] ^ macArray[3];
+
+ crc[6] = macArray[47] ^ macArray[46] ^ macArray[43] ^ macArray[41] ^
+ macArray[38] ^ macArray[37] ^ macArray[33] ^ macArray[32] ^
+ macArray[29] ^ macArray[28] ^ macArray[26] ^ macArray[21] ^
+ macArray[19] ^ macArray[17] ^ macArray[16] ^ macArray[14] ^
+ macArray[12] ^ macArray[10] ^ macArray[6] ^ macArray[5] ^
+ macArray[4];
+
+ crc[7] = macArray[47] ^ macArray[44] ^ macArray[42] ^ macArray[39] ^
+ macArray[38] ^ macArray[34] ^ macArray[33] ^ macArray[30] ^
+ macArray[29] ^ macArray[27] ^ macArray[22] ^ macArray[20] ^
+ macArray[18] ^ macArray[17] ^ macArray[15] ^ macArray[13] ^
+ macArray[11] ^ macArray[7] ^ macArray[6] ^ macArray[5];
+
+ for(i=0; i<8; i++)
+ crcResult = crcResult | (crc[i] << i);
+
+ return crcResult;
+}
+/*******************************************************************************
+* mvEthMcastAddrSet - Multicast address settings.
+*
+* DESCRIPTION:
+* This API controls the MV device MAC multicast support.
+* The MV device supports multicast using two tables:
+* 1) Special Multicast Table for MAC addresses of the form
+* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0xFF).
+* The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+* Table entries in the DA-Filter table.
+* In this case, the function calls ethPortSmcAddr() routine to set the
+* Special Multicast Table.
+* 2) Other Multicast Table for multicast of another type. A CRC-8bit
+* is used as an index to the Other Multicast Table entries in the
+* DA-Filter table.
+* In this case, the function calculates the CRC-8bit value and calls
+* ethPortOmcAddr() routine to set the Other Multicast Table.
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet port handler.
+* MV_U8* pAddr - Address to be set
+* int queue - RX queue to capture all packets with this
+* Multicast MAC address.
+* -1 means delete this Multicast address.
+*
+* RETURN: MV_STATUS
+* MV_TRUE - Success, Other - Failure
+*
+*******************************************************************************/
+MV_STATUS mvEthMcastAddrSet(void* pPortHndl, MV_U8 *pAddr, int queue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ unsigned char crcResult = 0;
+
+ if(queue >= MV_ETH_RX_Q_NUM)
+ {
+ mvOsPrintf("ethPort %d: RX queue #%d is out of range\n",
+ pPortCtrl->portNo, queue);
+ return MV_BAD_PARAM;
+ }
+
+ if((pAddr[0] == 0x01) &&
+ (pAddr[1] == 0x00) &&
+ (pAddr[2] == 0x5E) &&
+ (pAddr[3] == 0x00) &&
+ (pAddr[4] == 0x00))
+ {
+ ethSetSpecialMcastAddr(pPortCtrl->portNo, pAddr[5], queue);
+ }
+ else
+ {
+ crcResult = mvEthMcastCrc8Get(pAddr);
+
+ /* Check Add counter for this CRC value */
+ if(queue == -1)
+ {
+ if(pPortCtrl->mcastCount[crcResult] == 0)
+ {
+ mvOsPrintf("ethPort #%d: No valid Mcast for crc8=0x%02x\n",
+ pPortCtrl->portNo, (unsigned)crcResult);
+ return MV_NO_SUCH;
+ }
+
+ pPortCtrl->mcastCount[crcResult]--;
+ if(pPortCtrl->mcastCount[crcResult] != 0)
+ {
+ mvOsPrintf("ethPort #%d: After delete there are %d valid Mcast for crc8=0x%02x\n",
+ pPortCtrl->portNo, pPortCtrl->mcastCount[crcResult],
+ (unsigned)crcResult);
+ return MV_NO_CHANGE;
+ }
+ }
+ else
+ {
+ pPortCtrl->mcastCount[crcResult]++;
+ if(pPortCtrl->mcastCount[crcResult] > 1)
+ {
+ mvOsPrintf("ethPort #%d: Valid Mcast for crc8=0x%02x already exists\n",
+ pPortCtrl->portNo, (unsigned)crcResult);
+ return MV_NO_CHANGE;
+ }
+ }
+ ethSetOtherMcastAddr(pPortCtrl->portNo, crcResult, queue);
+ }
+ return MV_OK;
+}
+
+/*******************************************************************************
+* ethSetUcastTable - Unicast address settings.
+*
+* DESCRIPTION:
+* Set all entries in the Unicast MAC Table queue==-1 means reject all
+* INPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+static void ethSetUcastTable(int portNo, int queue)
+{
+ int offset;
+ MV_U32 regValue;
+
+ if(queue == -1)
+ {
+ regValue = 0;
+ }
+ else
+ {
+ regValue = (((0x01 | (queue<<1)) << 0) |
+ ((0x01 | (queue<<1)) << 8) |
+ ((0x01 | (queue<<1)) << 16) |
+ ((0x01 | (queue<<1)) << 24));
+ }
+
+ for (offset=0; offset<=0xC; offset+=4)
+ MV_REG_WRITE((ETH_DA_FILTER_UCAST_BASE(portNo) + offset), regValue);
+}
+
+/*******************************************************************************
+* mvEthSetSpecialMcastTable - Special Multicast address settings.
+*
+* DESCRIPTION:
+* Set all entries to the Special Multicast MAC Table. queue==-1 means reject all
+* INPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvEthSetSpecialMcastTable(int portNo, int queue)
+{
+ int offset;
+ MV_U32 regValue;
+
+ if(queue == -1)
+ {
+ regValue = 0;
+ }
+ else
+ {
+ regValue = (((0x01 | (queue<<1)) << 0) |
+ ((0x01 | (queue<<1)) << 8) |
+ ((0x01 | (queue<<1)) << 16) |
+ ((0x01 | (queue<<1)) << 24));
+ }
+
+ for (offset=0; offset<=0xFC; offset+=4)
+ {
+ MV_REG_WRITE((ETH_DA_FILTER_SPEC_MCAST_BASE(portNo) +
+ offset), regValue);
+ }
+}
+
+/*******************************************************************************
+* mvEthSetOtherMcastTable - Other Multicast address settings.
+*
+* DESCRIPTION:
+* Set all entries to the Other Multicast MAC Table. queue==-1 means reject all
+* INPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvEthSetOtherMcastTable(int portNo, int queue)
+{
+ int offset;
+ MV_U32 regValue;
+
+ if(queue == -1)
+ {
+ regValue = 0;
+ }
+ else
+ {
+ regValue = (((0x01 | (queue<<1)) << 0) |
+ ((0x01 | (queue<<1)) << 8) |
+ ((0x01 | (queue<<1)) << 16) |
+ ((0x01 | (queue<<1)) << 24));
+ }
+
+ for (offset=0; offset<=0xFC; offset+=4)
+ {
+ MV_REG_WRITE((ETH_DA_FILTER_OTH_MCAST_BASE(portNo) +
+ offset), regValue);
+ }
+}
+
+/*******************************************************************************
+* ethSetUcastAddr - This function Set the port unicast address table
+*
+* DESCRIPTION:
+* This function locates the proper entry in the Unicast table for the
+* specified MAC nibble and sets its properties according to function
+* parameters.
+*
+* INPUT:
+* int ethPortNum - Port number.
+* MV_U8 lastNibble - Unicast MAC Address last nibble.
+* int queue - Rx queue number for this MAC address.
+* value "-1" means remove address
+*
+* OUTPUT:
+* This function add/removes MAC addresses from the port unicast address
+* table.
+*
+* RETURN:
+* MV_TRUE is output succeeded.
+* MV_FALSE if option parameter is invalid.
+*
+*******************************************************************************/
+static MV_BOOL ethSetUcastAddr(int portNo, MV_U8 lastNibble, int queue)
+{
+ unsigned int unicastReg;
+ unsigned int tblOffset;
+ unsigned int regOffset;
+
+ /* Locate the Unicast table entry */
+ lastNibble = (0xf & lastNibble);
+ tblOffset = (lastNibble / 4) * 4; /* Register offset from unicast table base*/
+ regOffset = lastNibble % 4; /* Entry offset within the above register */
+
+
+ unicastReg = MV_REG_READ( (ETH_DA_FILTER_UCAST_BASE(portNo) +
+ tblOffset));
+
+
+ if(queue == -1)
+ {
+ /* Clear accepts frame bit at specified unicast DA table entry */
+ unicastReg &= ~(0xFF << (8*regOffset));
+ }
+ else
+ {
+ unicastReg &= ~(0xFF << (8*regOffset));
+ unicastReg |= ((0x01 | (queue<<1)) << (8*regOffset));
+ }
+ MV_REG_WRITE( (ETH_DA_FILTER_UCAST_BASE(portNo) + tblOffset),
+ unicastReg);
+
+ return MV_TRUE;
+}
+
+/*******************************************************************************
+* ethSetSpecialMcastAddr - Special Multicast address settings.
+*
+* DESCRIPTION:
+* This routine controls the MV device special MAC multicast support.
+* The Special Multicast Table for MAC addresses supports MAC of the form
+* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0xFF).
+* The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+* Table entries in the DA-Filter table.
+* This function set the Special Multicast Table appropriate entry
+* according to the argument given.
+*
+* INPUT:
+* int ethPortNum Port number.
+* unsigned char mcByte Multicast addr last byte (MAC DA[7:0] bits).
+* int queue Rx queue number for this MAC address.
+* int option 0 = Add, 1 = remove address.
+*
+* OUTPUT:
+* See description.
+*
+* RETURN:
+* MV_TRUE is output succeeded.
+* MV_FALSE if option parameter is invalid.
+*
+*******************************************************************************/
+static MV_BOOL ethSetSpecialMcastAddr(int ethPortNum, MV_U8 lastByte, int queue)
+{
+ unsigned int smcTableReg;
+ unsigned int tblOffset;
+ unsigned int regOffset;
+
+ /* Locate the SMC table entry */
+ tblOffset = (lastByte / 4); /* Register offset from SMC table base */
+ regOffset = lastByte % 4; /* Entry offset within the above register */
+
+ smcTableReg = MV_REG_READ((ETH_DA_FILTER_SPEC_MCAST_BASE(ethPortNum) + tblOffset*4));
+
+ if(queue == -1)
+ {
+ /* Clear accepts frame bit at specified Special DA table entry */
+ smcTableReg &= ~(0xFF << (8 * regOffset));
+ }
+ else
+ {
+ smcTableReg &= ~(0xFF << (8 * regOffset));
+ smcTableReg |= ((0x01 | (queue<<1)) << (8 * regOffset));
+ }
+ MV_REG_WRITE((ETH_DA_FILTER_SPEC_MCAST_BASE(ethPortNum) +
+ tblOffset*4), smcTableReg);
+
+ return MV_TRUE;
+}
+
+/*******************************************************************************
+* ethSetOtherMcastAddr - Multicast address settings.
+*
+* DESCRIPTION:
+* This routine controls the MV device Other MAC multicast support.
+* The Other Multicast Table is used for multicast of another type.
+* A CRC-8bit is used as an index to the Other Multicast Table entries
+* in the DA-Filter table.
+* The function gets the CRC-8bit value from the calling routine and
+* set the Other Multicast Table appropriate entry according to the
+* CRC-8 argument given.
+*
+* INPUT:
+* int ethPortNum Port number.
+* MV_U8 crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+* int queue Rx queue number for this MAC address.
+*
+* OUTPUT:
+* See description.
+*
+* RETURN:
+* MV_TRUE is output succeeded.
+* MV_FALSE if option parameter is invalid.
+*
+*******************************************************************************/
+static MV_BOOL ethSetOtherMcastAddr(int ethPortNum, MV_U8 crc8, int queue)
+{
+ unsigned int omcTableReg;
+ unsigned int tblOffset;
+ unsigned int regOffset;
+
+ /* Locate the OMC table entry */
+ tblOffset = (crc8 / 4) * 4; /* Register offset from OMC table base */
+ regOffset = crc8 % 4; /* Entry offset within the above register */
+
+ omcTableReg = MV_REG_READ(
+ (ETH_DA_FILTER_OTH_MCAST_BASE(ethPortNum) + tblOffset));
+
+ if(queue == -1)
+ {
+ /* Clear accepts frame bit at specified Other DA table entry */
+ omcTableReg &= ~(0xFF << (8 * regOffset));
+ }
+ else
+ {
+ omcTableReg &= ~(0xFF << (8 * regOffset));
+ omcTableReg |= ((0x01 | (queue<<1)) << (8 * regOffset));
+ }
+
+ MV_REG_WRITE((ETH_DA_FILTER_OTH_MCAST_BASE(ethPortNum) + tblOffset),
+ omcTableReg);
+
+ return MV_TRUE;
+}
+
+
+/******************************************************************************/
+/* MIB Counters functions */
+/******************************************************************************/
+
+
+/*******************************************************************************
+* mvEthMibCounterRead - Read a MIB counter
+*
+* DESCRIPTION:
+* This function reads a MIB counter of a specific ethernet port.
+* NOTE - Read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW or
+* ETH_MIB_GOOD_OCTETS_SENT_LOW counters will return 64 bits value,
+* so pHigh32 pointer should not be NULL in this case.
+*
+* INPUT:
+* int ethPortNum - Ethernet Port number.
+* unsigned int mibOffset - MIB counter offset.
+*
+* OUTPUT:
+* MV_U32* pHigh32 - pointer to place where 32 most significant bits
+* of the counter will be stored.
+*
+* RETURN:
+* 32 low sgnificant bits of MIB counter value.
+*
+*******************************************************************************/
+MV_U32 mvEthMibCounterRead(void* pPortHandle, unsigned int mibOffset,
+ MV_U32* pHigh32)
+{
+ int portNo;
+ MV_U32 valLow32, valHigh32;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+
+ portNo = pPortCtrl->portNo;
+
+ valLow32 = MV_REG_READ(ETH_MIB_COUNTERS_BASE(portNo) + mibOffset);
+
+ /* Implement FEr ETH. Erroneous Value when Reading the Upper 32-bits */
+ /* of a 64-bit MIB Counter. */
+ if( (mibOffset == ETH_MIB_GOOD_OCTETS_RECEIVED_LOW) ||
+ (mibOffset == ETH_MIB_GOOD_OCTETS_SENT_LOW) )
+ {
+ valHigh32 = MV_REG_READ(ETH_MIB_COUNTERS_BASE(portNo) + mibOffset + 4);
+ if(pHigh32 != NULL)
+ *pHigh32 = valHigh32;
+ }
+ return valLow32;
+}
+
+/*******************************************************************************
+* mvEthMibCountersClear - Clear all MIB counters
+*
+* DESCRIPTION:
+* This function clears all MIB counters
+*
+* INPUT:
+* int ethPortNum - Ethernet Port number.
+*
+*
+* RETURN: void
+*
+*******************************************************************************/
+void mvEthMibCountersClear(void* pPortHandle)
+{
+ int i, portNo;
+ unsigned int dummy;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+
+ portNo = pPortCtrl->portNo;
+
+ /* Perform dummy reads from MIB counters */
+ for(i=ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i<ETH_MIB_LATE_COLLISION; i+=4)
+ dummy = MV_REG_READ((ETH_MIB_COUNTERS_BASE(portNo) + i));
+}
+
+
+/******************************************************************************/
+/* RX Dispatching configuration routines */
+/******************************************************************************/
+
+int mvEthTosToRxqGet(void* pPortHandle, int tos)
+{
+ MV_U32 regValue;
+ int regIdx, regOffs, rxq;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+
+ if(tos > 0xFF)
+ {
+ mvOsPrintf("eth_%d: tos=0x%x is out of range\n", pPortCtrl->portNo, tos);
+ return -1;
+ }
+ regIdx = mvOsDivide(tos>>2, 10);
+ regOffs = mvOsReminder(tos>>2, 10);
+
+ regValue = MV_REG_READ(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx) );
+ rxq = (regValue >> (regOffs*3));
+ rxq &= 0x7;
+
+ return rxq;
+}
+
+/*******************************************************************************
+* mvEthTosToRxqSet - Map packets with special TOS value to special RX queue
+*
+* DESCRIPTION:
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* int tos - TOS value in the IP header of the packet
+* int rxq - RX Queue for packets with the configured TOS value
+* Negative value (-1) means no special processing for these packets,
+* so they will be processed as regular packets.
+*
+* RETURN: MV_STATUS
+*******************************************************************************/
+MV_STATUS mvEthTosToRxqSet(void* pPortHandle, int tos, int rxq)
+{
+ MV_U32 regValue;
+ int regIdx, regOffs;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+
+ if( (rxq < 0) || (rxq >= MV_ETH_RX_Q_NUM) )
+ {
+ mvOsPrintf("eth_%d: RX queue #%d is out of range\n", pPortCtrl->portNo, rxq);
+ return MV_BAD_PARAM;
+ }
+ if(tos > 0xFF)
+ {
+ mvOsPrintf("eth_%d: tos=0x%x is out of range\n", pPortCtrl->portNo, tos);
+ return MV_BAD_PARAM;
+ }
+ regIdx = mvOsDivide(tos>>2, 10);
+ regOffs = mvOsReminder(tos>>2, 10);
+
+ regValue = MV_REG_READ(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx) );
+ regValue &= ~(0x7 << (regOffs*3));
+ regValue |= (rxq << (regOffs*3));
+
+ MV_REG_WRITE(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx), regValue);
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthVlanPrioRxQueue - Configure RX queue to capture VLAN tagged packets with
+* special priority bits [0-2]
+*
+* DESCRIPTION:
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* int bpduQueue - Special queue to capture VLAN tagged packets with special
+* priority.
+* Negative value (-1) means no special processing for these packets,
+* so they will be processed as regular packets.
+*
+* RETURN: MV_STATUS
+* MV_OK - Success
+* MV_FAIL - Failed.
+*
+*******************************************************************************/
+MV_STATUS mvEthVlanPrioRxQueue(void* pPortHandle, int vlanPrio, int vlanPrioQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ MV_U32 vlanPrioReg;
+
+ if(vlanPrioQueue >= MV_ETH_RX_Q_NUM)
+ {
+ mvOsPrintf("ethDrv: RX queue #%d is out of range\n", vlanPrioQueue);
+ return MV_BAD_PARAM;
+ }
+ if(vlanPrio >= 8)
+ {
+ mvOsPrintf("ethDrv: vlanPrio=%d is out of range\n", vlanPrio);
+ return MV_BAD_PARAM;
+ }
+
+ vlanPrioReg = MV_REG_READ(ETH_VLAN_TAG_TO_PRIO_REG(pPortCtrl->portNo));
+ vlanPrioReg &= ~(0x7 << (vlanPrio*3));
+ vlanPrioReg |= (vlanPrioQueue << (vlanPrio*3));
+ MV_REG_WRITE(ETH_VLAN_TAG_TO_PRIO_REG(pPortCtrl->portNo), vlanPrioReg);
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvEthBpduRxQueue - Configure RX queue to capture BPDU packets.
+*
+* DESCRIPTION:
+* This function defines processing of BPDU packets.
+* BPDU packets can be accepted and captured to one of RX queues
+* or can be processing as regular Multicast packets.
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* int bpduQueue - Special queue to capture BPDU packets (DA is equal to
+* 01-80-C2-00-00-00 through 01-80-C2-00-00-FF,
+* except for the Flow-Control Pause packets).
+* Negative value (-1) means no special processing for BPDU,
+* packets so they will be processed as regular Multicast packets.
+*
+* RETURN: MV_STATUS
+* MV_OK - Success
+* MV_FAIL - Failed.
+*
+*******************************************************************************/
+MV_STATUS mvEthBpduRxQueue(void* pPortHandle, int bpduQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ MV_U32 portCfgReg;
+ MV_U32 portCfgExtReg;
+
+ if(bpduQueue >= MV_ETH_RX_Q_NUM)
+ {
+ mvOsPrintf("ethDrv: RX queue #%d is out of range\n", bpduQueue);
+ return MV_BAD_PARAM;
+ }
+
+ portCfgExtReg = MV_REG_READ(ETH_PORT_CONFIG_EXTEND_REG(pPortCtrl->portNo));
+
+ portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo));
+ if(bpduQueue >= 0)
+ {
+ pPortCtrl->portConfig.rxBpduQ = bpduQueue;
+
+ portCfgReg &= ~ETH_DEF_RX_BPDU_QUEUE_ALL_MASK;
+ portCfgReg |= ETH_DEF_RX_BPDU_QUEUE_MASK(pPortCtrl->portConfig.rxBpduQ);
+
+ MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg);
+
+ portCfgExtReg |= ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK;
+ }
+ else
+ {
+ pPortCtrl->portConfig.rxBpduQ = -1;
+ /* no special processing for BPDU packets */
+ portCfgExtReg &= (~ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK);
+ }
+
+ MV_REG_WRITE(ETH_PORT_CONFIG_EXTEND_REG(pPortCtrl->portNo), portCfgExtReg);
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvEthArpRxQueue - Configure RX queue to capture ARP packets.
+*
+* DESCRIPTION:
+* This function defines processing of ARP (type=0x0806) packets.
+* ARP packets can be accepted and captured to one of RX queues
+* or can be processed as other Broadcast packets.
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* int arpQueue - Special queue to capture ARP packets (type=0x806).
+* Negative value (-1) means discard ARP packets
+*
+* RETURN: MV_STATUS
+* MV_OK - Success
+* MV_FAIL - Failed.
+*
+*******************************************************************************/
+MV_STATUS mvEthArpRxQueue(void* pPortHandle, int arpQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ MV_U32 portCfgReg;
+
+ if(arpQueue >= MV_ETH_RX_Q_NUM)
+ {
+ mvOsPrintf("ethDrv: RX queue #%d is out of range\n", arpQueue);
+ return MV_BAD_PARAM;
+ }
+
+ portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo));
+
+ if(arpQueue >= 0)
+ {
+ pPortCtrl->portConfig.rxArpQ = arpQueue;
+ portCfgReg &= ~ETH_DEF_RX_ARP_QUEUE_ALL_MASK;
+ portCfgReg |= ETH_DEF_RX_ARP_QUEUE_MASK(pPortCtrl->portConfig.rxArpQ);
+
+ portCfgReg &= (~ETH_REJECT_ARP_BCAST_MASK);
+ }
+ else
+ {
+ pPortCtrl->portConfig.rxArpQ = -1;
+ portCfgReg |= ETH_REJECT_ARP_BCAST_MASK;
+ }
+
+ MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg);
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvEthTcpRxQueue - Configure RX queue to capture TCP packets.
+*
+* DESCRIPTION:
+* This function defines processing of TCP packets.
+* TCP packets can be accepted and captured to one of RX queues
+* or can be processed as regular Unicast packets.
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* int tcpQueue - Special queue to capture TCP packets. Value "-1"
+* means no special processing for TCP packets,
+* so they will be processed as regular
+*
+* RETURN: MV_STATUS
+* MV_OK - Success
+* MV_FAIL - Failed.
+*
+*******************************************************************************/
+MV_STATUS mvEthTcpRxQueue(void* pPortHandle, int tcpQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ MV_U32 portCfgReg;
+
+ if(tcpQueue >= MV_ETH_RX_Q_NUM)
+ {
+ mvOsPrintf("ethDrv: RX queue #%d is out of range\n", tcpQueue);
+ return MV_BAD_PARAM;
+ }
+ portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo));
+
+ if(tcpQueue >= 0)
+ {
+ pPortCtrl->portConfig.rxTcpQ = tcpQueue;
+ portCfgReg &= ~ETH_DEF_RX_TCP_QUEUE_ALL_MASK;
+ portCfgReg |= ETH_DEF_RX_TCP_QUEUE_MASK(pPortCtrl->portConfig.rxTcpQ);
+
+ portCfgReg |= ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK;
+ }
+ else
+ {
+ pPortCtrl->portConfig.rxTcpQ = -1;
+ portCfgReg &= (~ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK);
+ }
+
+ MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg);
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvEthUdpRxQueue - Configure RX queue to capture UDP packets.
+*
+* DESCRIPTION:
+* This function defines processing of UDP packets.
+* TCP packets can be accepted and captured to one of RX queues
+* or can be processed as regular Unicast packets.
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* int udpQueue - Special queue to capture UDP packets. Value "-1"
+* means no special processing for UDP packets,
+* so they will be processed as regular
+*
+* RETURN: MV_STATUS
+* MV_OK - Success
+* MV_FAIL - Failed.
+*
+*******************************************************************************/
+MV_STATUS mvEthUdpRxQueue(void* pPortHandle, int udpQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ MV_U32 portCfgReg;
+
+ if(udpQueue >= MV_ETH_RX_Q_NUM)
+ {
+ mvOsPrintf("ethDrv: RX queue #%d is out of range\n", udpQueue);
+ return MV_BAD_PARAM;
+ }
+
+ portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo));
+
+ if(udpQueue >= 0)
+ {
+ pPortCtrl->portConfig.rxUdpQ = udpQueue;
+ portCfgReg &= ~ETH_DEF_RX_UDP_QUEUE_ALL_MASK;
+ portCfgReg |= ETH_DEF_RX_UDP_QUEUE_MASK(pPortCtrl->portConfig.rxUdpQ);
+
+ portCfgReg |= ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK;
+ }
+ else
+ {
+ pPortCtrl->portConfig.rxUdpQ = -1;
+ portCfgReg &= ~ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK;
+ }
+
+ MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg);
+
+ return MV_OK;
+}
+
+
+/******************************************************************************/
+/* Speed, Duplex, FlowControl routines */
+/******************************************************************************/
+
+/*******************************************************************************
+* mvEthSpeedDuplexSet - Set Speed and Duplex of the port.
+*
+* DESCRIPTION:
+* This function configure the port to work with desirable Duplex and Speed.
+* Changing of these parameters are allowed only when port is disabled.
+* This function disable the port if was enabled, change duplex and speed
+* and, enable the port back if needed.
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* ETH_PORT_SPEED speed - Speed of the port.
+* ETH_PORT_SPEED duplex - Duplex of the port.
+*
+* RETURN: MV_STATUS
+* MV_OK - Success
+* MV_OUT_OF_RANGE - Failed. Port is out of valid range
+* MV_NOT_FOUND - Failed. Port is not initialized.
+* MV_BAD_PARAM - Input parameters (speed/duplex) in conflict.
+* MV_BAD_VALUE - Value of one of input parameters (speed, duplex)
+* is not valid
+*
+*******************************************************************************/
+MV_STATUS mvEthSpeedDuplexSet(void* pPortHandle, MV_ETH_PORT_SPEED speed,
+ MV_ETH_PORT_DUPLEX duplex)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ int port = pPortCtrl->portNo;
+ MV_U32 portSerialCtrlReg;
+
+ if( (port < 0) || (port >= (int)mvCtrlEthMaxPortGet()) )
+ return MV_OUT_OF_RANGE;
+
+ pPortCtrl = ethPortCtrl[port];
+ if(pPortCtrl == NULL)
+ return MV_NOT_FOUND;
+
+ /* Check validity */
+ if( (speed == MV_ETH_SPEED_1000) && (duplex == MV_ETH_DUPLEX_HALF) )
+ return MV_BAD_PARAM;
+
+ portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port));
+ /* Set Speed */
+ switch(speed)
+ {
+ case MV_ETH_SPEED_AN:
+ portSerialCtrlReg &= ~ETH_DISABLE_SPEED_AUTO_NEG_MASK;
+ break;
+
+ case MV_ETH_SPEED_10:
+ portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK;
+ portSerialCtrlReg &= ~ETH_SET_GMII_SPEED_1000_MASK;
+ portSerialCtrlReg &= ~ETH_SET_MII_SPEED_100_MASK;
+ break;
+
+ case MV_ETH_SPEED_100:
+ portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK;
+ portSerialCtrlReg &= ~ETH_SET_GMII_SPEED_1000_MASK;
+ portSerialCtrlReg |= ETH_SET_MII_SPEED_100_MASK;
+ break;
+
+ case MV_ETH_SPEED_1000:
+ portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK;
+ portSerialCtrlReg |= ETH_SET_GMII_SPEED_1000_MASK;
+ break;
+
+ default:
+ mvOsPrintf("ethDrv: Unexpected Speed value %d\n", speed);
+ return MV_BAD_VALUE;
+ }
+ /* Set duplex */
+ switch(duplex)
+ {
+ case MV_ETH_DUPLEX_AN:
+ portSerialCtrlReg &= ~ETH_DISABLE_DUPLEX_AUTO_NEG_MASK;
+ break;
+
+ case MV_ETH_DUPLEX_HALF:
+ portSerialCtrlReg |= ETH_DISABLE_DUPLEX_AUTO_NEG_MASK;
+ portSerialCtrlReg &= ~ETH_SET_FULL_DUPLEX_MASK;
+ break;
+
+ case MV_ETH_DUPLEX_FULL:
+ portSerialCtrlReg |= ETH_DISABLE_DUPLEX_AUTO_NEG_MASK;
+ portSerialCtrlReg |= ETH_SET_FULL_DUPLEX_MASK;
+ break;
+
+ default:
+ mvOsPrintf("ethDrv: Unexpected Duplex value %d\n", duplex);
+ return MV_BAD_VALUE;
+ }
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(port), portSerialCtrlReg);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthFlowCtrlSet - Set Flow Control of the port.
+*
+* DESCRIPTION:
+* This function configure the port to work with desirable Duplex and
+* Speed. Changing of these parameters are allowed only when port is
+* disabled. This function disable the port if was enabled, change
+* duplex and speed and, enable the port back if needed.
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* MV_ETH_PORT_FC flowControl - Flow control of the port.
+*
+* RETURN: MV_STATUS
+* MV_OK - Success
+* MV_OUT_OF_RANGE - Failed. Port is out of valid range
+* MV_NOT_FOUND - Failed. Port is not initialized.
+* MV_BAD_VALUE - Value flowControl parameters is not valid
+*
+*******************************************************************************/
+MV_STATUS mvEthFlowCtrlSet(void* pPortHandle, MV_ETH_PORT_FC flowControl)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ int port = pPortCtrl->portNo;
+ MV_U32 portSerialCtrlReg;
+
+ if( (port < 0) || (port >= (int)mvCtrlEthMaxPortGet() ) )
+ return MV_OUT_OF_RANGE;
+
+ pPortCtrl = ethPortCtrl[port];
+ if(pPortCtrl == NULL)
+ return MV_NOT_FOUND;
+
+ portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port));
+ switch(flowControl)
+ {
+ case MV_ETH_FC_AN_ADV_DIS:
+ portSerialCtrlReg &= ~ETH_DISABLE_FC_AUTO_NEG_MASK;
+ portSerialCtrlReg &= ~ETH_ADVERTISE_SYM_FC_MASK;
+ break;
+
+ case MV_ETH_FC_AN_ADV_SYM:
+ portSerialCtrlReg &= ~ETH_DISABLE_FC_AUTO_NEG_MASK;
+ portSerialCtrlReg |= ETH_ADVERTISE_SYM_FC_MASK;
+ break;
+
+ case MV_ETH_FC_DISABLE:
+ portSerialCtrlReg |= ETH_DISABLE_FC_AUTO_NEG_MASK;
+ portSerialCtrlReg &= ~ETH_SET_FLOW_CTRL_MASK;
+ break;
+
+ case MV_ETH_FC_ENABLE:
+ portSerialCtrlReg |= ETH_DISABLE_FC_AUTO_NEG_MASK;
+ portSerialCtrlReg |= ETH_SET_FLOW_CTRL_MASK;
+ break;
+
+ default:
+ mvOsPrintf("ethDrv: Unexpected FlowControl value %d\n", flowControl);
+ return MV_BAD_VALUE;
+ }
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(port), portSerialCtrlReg);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthHeaderModeSet - Set port header mode.
+*
+* DESCRIPTION:
+* This function configures the port to work in Marvell-Header mode.
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* MV_ETH_HEADER_MODE headerMode - The header mode to set the port in.
+*
+* RETURN: MV_STATUS
+* MV_OK - Success
+* MV_NOT_SUPPORTED- Feature not supported.
+* MV_OUT_OF_RANGE - Failed. Port is out of valid range
+* MV_NOT_FOUND - Failed. Port is not initialized.
+* MV_BAD_VALUE - Value of headerMode or numRxQueue parameter is not valid.
+*
+*******************************************************************************/
+MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ int port = pPortCtrl->portNo;
+ MV_U32 mvHeaderReg;
+ MV_U32 numRxQ = MV_ETH_RX_Q_NUM;
+
+ if((port < 0) || (port >= mvCtrlEthMaxPortGet()))
+ return MV_OUT_OF_RANGE;
+
+ pPortCtrl = ethPortCtrl[port];
+ if(pPortCtrl == NULL)
+ return MV_NOT_FOUND;
+
+ mvHeaderReg = MV_REG_READ(ETH_PORT_MARVELL_HEADER_REG(port));
+ /* Disable header mode. */
+ mvHeaderReg &= ~ETH_MVHDR_EN_MASK;
+
+ if(headerMode != MV_ETH_DISABLE_HEADER_MODE)
+ {
+ /* Enable Header mode. */
+ mvHeaderReg |= ETH_MVHDR_EN_MASK;
+
+ /* Clear DA-Prefix & MHMask fields.*/
+ mvHeaderReg &= ~(ETH_MVHDR_DAPREFIX_MASK | ETH_MVHDR_MHMASK_MASK);
+
+ if(numRxQ > 1)
+ {
+ switch (headerMode)
+ {
+ case(MV_ETH_ENABLE_HEADER_MODE_PRI_2_1):
+ mvHeaderReg |= ETH_MVHDR_DAPREFIX_PRI_1_2;
+ break;
+ case(MV_ETH_ENABLE_HEADER_MODE_PRI_DBNUM):
+ mvHeaderReg |= ETH_MVHDR_DAPREFIX_DBNUM_PRI;
+ break;
+ case(MV_ETH_ENABLE_HEADER_MODE_PRI_SPID):
+ mvHeaderReg |= ETH_MVHDR_DAPREFIX_SPID_PRI;
+ break;
+ default:
+ break;
+ }
+
+ switch (numRxQ)
+ {
+ case (4):
+ mvHeaderReg |= ETH_MVHDR_MHMASK_4_QUEUE;
+ break;
+ case (8):
+ mvHeaderReg |= ETH_MVHDR_MHMASK_8_QUEUE;
+ break;
+ default:
+ break;
+ }
+ }
+ }
+
+ MV_REG_WRITE(ETH_PORT_MARVELL_HEADER_REG(port), mvHeaderReg);
+
+ return MV_OK;
+}
+
+#if (MV_ETH_VERSION >= 4)
+/*******************************************************************************
+* mvEthEjpModeSet - Enable / Disable EJP policy for TX.
+*
+* DESCRIPTION:
+* This function
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* MV_BOOL TRUE - enable EJP mode
+* FALSE - disable EJP mode
+*
+* OUTPUT: MV_STATUS
+* MV_OK - Success
+* Other - Failure
+*
+* RETURN: None.
+*
+*******************************************************************************/
+MV_STATUS mvEthEjpModeSet(void* pPortHandle, int mode)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ int port = pPortCtrl->portNo;
+
+ if((port < 0) || (port >= mvCtrlEthMaxPortGet()))
+ return MV_OUT_OF_RANGE;
+
+ pPortCtrl = ethPortCtrl[port];
+ if(pPortCtrl == NULL)
+ return MV_NOT_FOUND;
+
+ pPortCtrl->portConfig.ejpMode = mode;
+ if(mode)
+ {
+ /* EJP enabled */
+ MV_REG_WRITE(ETH_TXQ_CMD_1_REG(port), ETH_TX_EJP_ENABLE_MASK);
+ }
+ else
+ {
+ /* EJP disabled */
+ MV_REG_WRITE(ETH_TXQ_CMD_1_REG(port), 0);
+ }
+ mvOsPrintf("eth_%d: EJP %s - ETH_TXQ_CMD_1_REG: 0x%x = 0x%08x\n",
+ port, mode ? "Enabled" : "Disabled", ETH_TXQ_CMD_1_REG(port),
+ MV_REG_READ(ETH_TXQ_CMD_1_REG(port)));
+
+ return MV_OK;
+}
+#endif /* MV_ETH_VERSION >= 4 */
+
+/*******************************************************************************
+* mvEthStatusGet - Get major properties of the port .
+*
+* DESCRIPTION:
+* This function get major properties of the port (link, speed, duplex,
+* flowControl, etc) and return them using the single structure.
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+*
+* OUTPUT:
+* MV_ETH_PORT_STATUS* pStatus - Pointer to structure, were port status
+* will be placed.
+*
+* RETURN: None.
+*
+*******************************************************************************/
+void mvEthStatusGet(void* pPortHandle, MV_ETH_PORT_STATUS* pStatus)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ int port = pPortCtrl->portNo;
+
+ MV_U32 regValue;
+
+ regValue = MV_REG_READ( ETH_PORT_STATUS_REG(port) );
+
+ if(regValue & ETH_GMII_SPEED_1000_MASK)
+ pStatus->speed = MV_ETH_SPEED_1000;
+ else if(regValue & ETH_MII_SPEED_100_MASK)
+ pStatus->speed = MV_ETH_SPEED_100;
+ else
+ pStatus->speed = MV_ETH_SPEED_10;
+
+ if(regValue & ETH_LINK_UP_MASK)
+ pStatus->isLinkUp = MV_TRUE;
+ else
+ pStatus->isLinkUp = MV_FALSE;
+
+ if(regValue & ETH_FULL_DUPLEX_MASK)
+ pStatus->duplex = MV_ETH_DUPLEX_FULL;
+ else
+ pStatus->duplex = MV_ETH_DUPLEX_HALF;
+
+
+ if(regValue & ETH_ENABLE_RCV_FLOW_CTRL_MASK)
+ pStatus->flowControl = MV_ETH_FC_ENABLE;
+ else
+ pStatus->flowControl = MV_ETH_FC_DISABLE;
+}
+
+
+/******************************************************************************/
+/* PHY Control Functions */
+/******************************************************************************/
+
+
+/*******************************************************************************
+* mvEthPhyAddrSet - Set the ethernet port PHY address.
+*
+* DESCRIPTION:
+* This routine set the ethernet port PHY address according to given
+* parameter.
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+* int phyAddr - PHY address
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+void mvEthPhyAddrSet(void* pPortHandle, int phyAddr)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ int port = pPortCtrl->portNo;
+ unsigned int regData;
+
+ regData = MV_REG_READ(ETH_PHY_ADDR_REG(port));
+
+ regData &= ~ETH_PHY_ADDR_MASK;
+ regData |= phyAddr;
+
+ MV_REG_WRITE(ETH_PHY_ADDR_REG(port), regData);
+
+ return;
+}
+
+/*******************************************************************************
+* mvEthPhyAddrGet - Get the ethernet port PHY address.
+*
+* DESCRIPTION:
+* This routine returns the given ethernet port PHY address.
+*
+* INPUT:
+* void* pPortHandle - Pointer to port specific handler;
+*
+*
+* RETURN: int - PHY address.
+*
+*******************************************************************************/
+int mvEthPhyAddrGet(void* pPortHandle)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+ int port = pPortCtrl->portNo;
+ unsigned int regData;
+
+ regData = MV_REG_READ(ETH_PHY_ADDR_REG(port));
+
+ return ((regData >> (5 * port)) & 0x1f);
+}
+
+/******************************************************************************/
+/* Descriptor handling Functions */
+/******************************************************************************/
+
+/*******************************************************************************
+* etherInitRxDescRing - Curve a Rx chain desc list and buffer in memory.
+*
+* DESCRIPTION:
+* This function prepares a Rx chained list of descriptors and packet
+* buffers in a form of a ring. The routine must be called after port
+* initialization routine and before port start routine.
+* The Ethernet SDMA engine uses CPU bus addresses to access the various
+* devices in the system (i.e. DRAM). This function uses the ethernet
+* struct 'virtual to physical' routine (set by the user) to set the ring
+* with physical addresses.
+*
+* INPUT:
+* ETH_QUEUE_CTRL *pEthPortCtrl Ethernet Port Control srtuct.
+* int rxQueue Number of Rx queue.
+* int rxDescNum Number of Rx descriptors
+* MV_U8* rxDescBaseAddr Rx descriptors memory area base addr.
+*
+* OUTPUT:
+* The routine updates the Ethernet port control struct with information
+* regarding the Rx descriptors and buffers.
+*
+* RETURN: None
+*
+*******************************************************************************/
+static void ethInitRxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue)
+{
+ ETH_RX_DESC *pRxDescBase, *pRxDesc, *pRxPrevDesc;
+ int ix, rxDescNum = pPortCtrl->rxQueueConfig[queue].descrNum;
+ ETH_QUEUE_CTRL *pQueueCtrl = &pPortCtrl->rxQueue[queue];
+
+ /* Make sure descriptor address is cache line size aligned */
+ pRxDescBase = (ETH_RX_DESC*)MV_ALIGN_UP((MV_ULONG)pQueueCtrl->descBuf.bufVirtPtr,
+ CPU_D_CACHE_LINE_SIZE);
+
+ pRxDesc = (ETH_RX_DESC*)pRxDescBase;
+ pRxPrevDesc = pRxDesc;
+
+ /* initialize the Rx descriptors ring */
+ for (ix=0; ix<rxDescNum; ix++)
+ {
+ pRxDesc->bufSize = 0x0;
+ pRxDesc->byteCnt = 0x0;
+ pRxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST;
+ pRxDesc->bufPtr = 0x0;
+ pRxDesc->returnInfo = 0x0;
+ pRxPrevDesc = pRxDesc;
+ if(ix == (rxDescNum-1))
+ {
+ /* Closing Rx descriptors ring */
+ pRxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pRxDescBase);
+ }
+ else
+ {
+ pRxDesc = (ETH_RX_DESC*)((MV_ULONG)pRxDesc + ETH_RX_DESC_ALIGNED_SIZE);
+ pRxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pRxDesc);
+ }
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pRxPrevDesc);
+ }
+
+ pQueueCtrl->pCurrentDescr = pRxDescBase;
+ pQueueCtrl->pUsedDescr = pRxDescBase;
+
+ pQueueCtrl->pFirstDescr = pRxDescBase;
+ pQueueCtrl->pLastDescr = pRxDesc;
+ pQueueCtrl->resource = 0;
+}
+
+void ethResetRxDescRing(void* pPortHndl, int queue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->rxQueue[queue];
+ ETH_RX_DESC* pRxDesc = (ETH_RX_DESC*)pQueueCtrl->pFirstDescr;
+
+ pQueueCtrl->resource = 0;
+ if(pQueueCtrl->pFirstDescr != NULL)
+ {
+ while(MV_TRUE)
+ {
+ pRxDesc->bufSize = 0x0;
+ pRxDesc->byteCnt = 0x0;
+ pRxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST;
+ pRxDesc->bufPtr = 0x0;
+ pRxDesc->returnInfo = 0x0;
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pRxDesc);
+ if( (void*)pRxDesc == pQueueCtrl->pLastDescr)
+ break;
+ pRxDesc = RX_NEXT_DESC_PTR(pRxDesc, pQueueCtrl);
+ }
+ pQueueCtrl->pCurrentDescr = pQueueCtrl->pFirstDescr;
+ pQueueCtrl->pUsedDescr = pQueueCtrl->pFirstDescr;
+
+ /* Update RX Command register */
+ pPortCtrl->portRxQueueCmdReg |= (1 << queue);
+
+ /* update HW */
+ MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue),
+ (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) );
+ }
+ else
+ {
+ /* Update RX Command register */
+ pPortCtrl->portRxQueueCmdReg &= ~(1 << queue);
+
+ /* update HW */
+ MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), 0);
+ }
+}
+
+/*******************************************************************************
+* etherInitTxDescRing - Curve a Tx chain desc list and buffer in memory.
+*
+* DESCRIPTION:
+* This function prepares a Tx chained list of descriptors and packet
+* buffers in a form of a ring. The routine must be called after port
+* initialization routine and before port start routine.
+* The Ethernet SDMA engine uses CPU bus addresses to access the various
+* devices in the system (i.e. DRAM). This function uses the ethernet
+* struct 'virtual to physical' routine (set by the user) to set the ring
+* with physical addresses.
+*
+* INPUT:
+* ETH_PORT_CTRL *pEthPortCtrl Ethernet Port Control srtuct.
+* int txQueue Number of Tx queue.
+* int txDescNum Number of Tx descriptors
+* int txBuffSize Size of Tx buffer
+* MV_U8* pTxDescBase Tx descriptors memory area base addr.
+*
+* OUTPUT:
+* The routine updates the Ethernet port control struct with information
+* regarding the Tx descriptors and buffers.
+*
+* RETURN: None.
+*
+*******************************************************************************/
+static void ethInitTxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue)
+{
+ ETH_TX_DESC *pTxDescBase, *pTxDesc, *pTxPrevDesc;
+ int ix, txDescNum = pPortCtrl->txQueueConfig[queue].descrNum;
+ ETH_QUEUE_CTRL *pQueueCtrl = &pPortCtrl->txQueue[queue];
+
+ /* Make sure descriptor address is cache line size aligned */
+ pTxDescBase = (ETH_TX_DESC*)MV_ALIGN_UP((MV_ULONG)pQueueCtrl->descBuf.bufVirtPtr,
+ CPU_D_CACHE_LINE_SIZE);
+
+ pTxDesc = (ETH_TX_DESC*)pTxDescBase;
+ pTxPrevDesc = pTxDesc;
+
+ /* initialize the Tx descriptors ring */
+ for (ix=0; ix<txDescNum; ix++)
+ {
+ pTxDesc->byteCnt = 0x0000;
+ pTxDesc->L4iChk = 0x0000;
+ pTxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST;
+ pTxDesc->bufPtr = 0x0;
+ pTxDesc->returnInfo = 0x0;
+
+ pTxPrevDesc = pTxDesc;
+
+ if(ix == (txDescNum-1))
+ {
+ /* Closing Tx descriptors ring */
+ pTxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pTxDescBase);
+ }
+ else
+ {
+ pTxDesc = (ETH_TX_DESC*)((MV_ULONG)pTxDesc + ETH_TX_DESC_ALIGNED_SIZE);
+ pTxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pTxDesc);
+ }
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pTxPrevDesc);
+ }
+
+ pQueueCtrl->pCurrentDescr = pTxDescBase;
+ pQueueCtrl->pUsedDescr = pTxDescBase;
+
+ pQueueCtrl->pFirstDescr = pTxDescBase;
+ pQueueCtrl->pLastDescr = pTxDesc;
+ /* Leave one TX descriptor out of use */
+ pQueueCtrl->resource = txDescNum - 1;
+}
+
+void ethResetTxDescRing(void* pPortHndl, int queue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->txQueue[queue];
+ ETH_TX_DESC* pTxDesc = (ETH_TX_DESC*)pQueueCtrl->pFirstDescr;
+
+ pQueueCtrl->resource = 0;
+ if(pQueueCtrl->pFirstDescr != NULL)
+ {
+ while(MV_TRUE)
+ {
+ pTxDesc->byteCnt = 0x0000;
+ pTxDesc->L4iChk = 0x0000;
+ pTxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST;
+ pTxDesc->bufPtr = 0x0;
+ pTxDesc->returnInfo = 0x0;
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pTxDesc);
+ pQueueCtrl->resource++;
+ if( (void*)pTxDesc == pQueueCtrl->pLastDescr)
+ break;
+ pTxDesc = TX_NEXT_DESC_PTR(pTxDesc, pQueueCtrl);
+ }
+ /* Leave one TX descriptor out of use */
+ pQueueCtrl->resource--;
+ pQueueCtrl->pCurrentDescr = pQueueCtrl->pFirstDescr;
+ pQueueCtrl->pUsedDescr = pQueueCtrl->pFirstDescr;
+
+ /* Update TX Command register */
+ pPortCtrl->portTxQueueCmdReg |= MV_32BIT_LE_FAST(1 << queue);
+ /* update HW */
+ MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue),
+ (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) );
+ }
+ else
+ {
+ /* Update TX Command register */
+ pPortCtrl->portTxQueueCmdReg &= MV_32BIT_LE_FAST(~(1 << queue));
+ /* update HW */
+ MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), 0 );
+ }
+}
+
+/*******************************************************************************
+* ethAllocDescrMemory - Free memory allocated for RX and TX descriptors.
+*
+* DESCRIPTION:
+* This function allocates memory for RX and TX descriptors.
+* - If ETH_DESCR_IN_SRAM defined, allocate memory from SRAM.
+* - If ETH_DESCR_IN_SDRAM defined, allocate memory in SDRAM.
+*
+* INPUT:
+* int size - size of memory should be allocated.
+*
+* RETURN: None
+*
+*******************************************************************************/
+static MV_U8* ethAllocDescrMemory(ETH_PORT_CTRL* pPortCtrl, int descSize,
+ MV_ULONG* pPhysAddr, MV_U32 *memHandle)
+{
+ MV_U8* pVirt;
+
+#if defined(ETH_DESCR_IN_SRAM)
+ if(ethDescInSram == MV_TRUE)
+ pVirt = (char*)mvSramMalloc(descSize, pPhysAddr);
+ else
+#endif /* ETH_DESCR_IN_SRAM */
+ {
+#ifdef ETH_DESCR_UNCACHED
+ pVirt = (MV_U8*)mvOsIoUncachedMalloc(pPortCtrl->osHandle, descSize,
+ pPhysAddr,memHandle);
+#else
+ pVirt = (MV_U8*)mvOsIoCachedMalloc(pPortCtrl->osHandle, descSize,
+ pPhysAddr, memHandle);
+#endif /* ETH_DESCR_UNCACHED */
+ }
+ memset(pVirt, 0, descSize);
+
+ return pVirt;
+}
+
+/*******************************************************************************
+* ethFreeDescrMemory - Free memory allocated for RX and TX descriptors.
+*
+* DESCRIPTION:
+* This function frees memory allocated for RX and TX descriptors.
+* - If ETH_DESCR_IN_SRAM defined, free memory using gtSramFree() function.
+* - If ETH_DESCR_IN_SDRAM defined, free memory using mvOsFree() function.
+*
+* INPUT:
+* void* pVirtAddr - virtual pointer to memory allocated for RX and TX
+* desriptors.
+*
+* RETURN: None
+*
+*******************************************************************************/
+void ethFreeDescrMemory(ETH_PORT_CTRL* pPortCtrl, MV_BUF_INFO* pDescBuf)
+{
+ if( (pDescBuf == NULL) || (pDescBuf->bufVirtPtr == NULL) )
+ return;
+
+#if defined(ETH_DESCR_IN_SRAM)
+ if( ethDescInSram )
+ {
+ mvSramFree(pDescBuf->bufSize, pDescBuf->bufPhysAddr, pDescBuf->bufVirtPtr);
+ return;
+ }
+#endif /* ETH_DESCR_IN_SRAM */
+
+#ifdef ETH_DESCR_UNCACHED
+ mvOsIoUncachedFree(pPortCtrl->osHandle, pDescBuf->bufSize, pDescBuf->bufPhysAddr,
+ pDescBuf->bufVirtPtr,pDescBuf->memHandle);
+#else
+ mvOsIoCachedFree(pPortCtrl->osHandle, pDescBuf->bufSize, pDescBuf->bufPhysAddr,
+ pDescBuf->bufVirtPtr,pDescBuf->memHandle);
+#endif /* ETH_DESCR_UNCACHED */
+}
+
+/******************************************************************************/
+/* Other Functions */
+/******************************************************************************/
+
+void mvEthPortPowerUp(int port)
+{
+ MV_U32 regVal;
+
+ /* MAC Cause register should be cleared */
+ MV_REG_WRITE(ETH_UNIT_INTR_CAUSE_REG(port), 0);
+
+ if (mvBoardIsPortInSgmii(port))
+ mvEthPortSgmiiConfig(port);
+
+ /* Cancel Port Reset */
+ regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port));
+ regVal &= (~ETH_PORT_RESET_MASK);
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal);
+ while( (MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)) & ETH_PORT_RESET_MASK) != 0);
+}
+
+void mvEthPortPowerDown(int port)
+{
+ MV_U32 regVal;
+
+ /* Port must be DISABLED */
+ regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port));
+ if( (regVal & ETH_PORT_ENABLE_MASK) != 0)
+ {
+ mvOsPrintf("ethPort #%d: PowerDown - port must be Disabled (PSC=0x%x)\n",
+ port, regVal);
+ return;
+ }
+
+ /* Port Reset (Read after write the register as a precaution) */
+ regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port));
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal | ETH_PORT_RESET_MASK);
+ while((MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)) & ETH_PORT_RESET_MASK) == 0);
+}
+
+static void mvEthPortSgmiiConfig(int port)
+{
+ MV_U32 regVal;
+
+ regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port));
+
+ regVal |= (ETH_SGMII_MODE_MASK /*| ETH_INBAND_AUTO_NEG_ENABLE_MASK */);
+ regVal &= (~ETH_INBAND_AUTO_NEG_BYPASS_MASK);
+
+ MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal);
+}
+
+
+
+
+
+
+
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvEthDebug.c - Source file for user friendly debug functions
+*
+* DESCRIPTION:
+*
+* DEPENDENCIES:
+* None.
+*
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mvCommon.h"
+#include "mvTypes.h"
+#include "mv802_3.h"
+#include "mvDebug.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "eth-phy/mvEthPhy.h"
+#include "eth/mvEth.h"
+#include "eth/gbe/mvEthDebug.h"
+
+/* #define mvOsPrintf printf */
+
+void mvEthPortShow(void* pHndl);
+void mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode);
+
+/******************************************************************************/
+/* Debug functions */
+/******************************************************************************/
+void ethRxCoal(int port, int usec)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvEthRxCoalSet(pHndl, usec);
+ }
+}
+
+void ethTxCoal(int port, int usec)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvEthTxCoalSet(pHndl, usec);
+ }
+}
+
+#if (MV_ETH_VERSION >= 4)
+void ethEjpModeSet(int port, int mode)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvEthEjpModeSet(pHndl, mode);
+ }
+}
+#endif /* (MV_ETH_VERSION >= 4) */
+
+void ethBpduRxQ(int port, int bpduQueue)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvEthBpduRxQueue(pHndl, bpduQueue);
+ }
+}
+
+void ethArpRxQ(int port, int arpQueue)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvEthArpRxQueue(pHndl, arpQueue);
+ }
+}
+
+void ethTcpRxQ(int port, int tcpQueue)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvEthTcpRxQueue(pHndl, tcpQueue);
+ }
+}
+
+void ethUdpRxQ(int port, int udpQueue)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvEthUdpRxQueue(pHndl, udpQueue);
+ }
+}
+
+void ethTxPolicyRegs(int port)
+{
+ int queue;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)mvEthPortHndlGet(port);
+
+ if(pPortCtrl == NULL)
+ {
+ return;
+ }
+ mvOsPrintf("Port #%d TX Policy: EJP=%d, TXQs: ",
+ port, pPortCtrl->portConfig.ejpMode);
+ for(queue=0; queue<MV_ETH_TX_Q_NUM; queue++)
+ {
+ if(pPortCtrl->txQueueConfig[queue].descrNum > 0)
+ mvOsPrintf("%d, ", queue);
+ }
+ mvOsPrintf("\n");
+
+ mvOsPrintf("\n\t TX policy Port #%d configuration registers\n", port);
+
+ mvOsPrintf("ETH_TX_QUEUE_COMMAND_REG : 0x%X = 0x%08x\n",
+ ETH_TX_QUEUE_COMMAND_REG(port),
+ MV_REG_READ( ETH_TX_QUEUE_COMMAND_REG(port) ) );
+
+ mvOsPrintf("ETH_TX_FIXED_PRIO_CFG_REG : 0x%X = 0x%08x\n",
+ ETH_TX_FIXED_PRIO_CFG_REG(port),
+ MV_REG_READ( ETH_TX_FIXED_PRIO_CFG_REG(port) ) );
+
+ mvOsPrintf("ETH_TX_TOKEN_RATE_CFG_REG : 0x%X = 0x%08x\n",
+ ETH_TX_TOKEN_RATE_CFG_REG(port),
+ MV_REG_READ( ETH_TX_TOKEN_RATE_CFG_REG(port) ) );
+
+ mvOsPrintf("ETH_MAX_TRANSMIT_UNIT_REG : 0x%X = 0x%08x\n",
+ ETH_MAX_TRANSMIT_UNIT_REG(port),
+ MV_REG_READ( ETH_MAX_TRANSMIT_UNIT_REG(port) ) );
+
+ mvOsPrintf("ETH_TX_TOKEN_BUCKET_SIZE_REG : 0x%X = 0x%08x\n",
+ ETH_TX_TOKEN_BUCKET_SIZE_REG(port),
+ MV_REG_READ( ETH_TX_TOKEN_BUCKET_SIZE_REG(port) ) );
+
+ mvOsPrintf("ETH_TX_TOKEN_BUCKET_COUNT_REG : 0x%X = 0x%08x\n",
+ ETH_TX_TOKEN_BUCKET_COUNT_REG(port),
+ MV_REG_READ( ETH_TX_TOKEN_BUCKET_COUNT_REG(port) ) );
+
+ for(queue=0; queue<MV_ETH_MAX_TXQ; queue++)
+ {
+ mvOsPrintf("\n\t TX policy Port #%d, Queue #%d configuration registers\n", port, queue);
+
+ mvOsPrintf("ETH_TXQ_TOKEN_COUNT_REG : 0x%X = 0x%08x\n",
+ ETH_TXQ_TOKEN_COUNT_REG(port, queue),
+ MV_REG_READ( ETH_TXQ_TOKEN_COUNT_REG(port, queue) ) );
+
+ mvOsPrintf("ETH_TXQ_TOKEN_CFG_REG : 0x%X = 0x%08x\n",
+ ETH_TXQ_TOKEN_CFG_REG(port, queue),
+ MV_REG_READ( ETH_TXQ_TOKEN_CFG_REG(port, queue) ) );
+
+ mvOsPrintf("ETH_TXQ_ARBITER_CFG_REG : 0x%X = 0x%08x\n",
+ ETH_TXQ_ARBITER_CFG_REG(port, queue),
+ MV_REG_READ( ETH_TXQ_ARBITER_CFG_REG(port, queue) ) );
+ }
+ mvOsPrintf("\n");
+}
+
+/* Print important registers of Ethernet port */
+void ethPortRegs(int port)
+{
+ mvOsPrintf("\n\t ethGiga #%d port Registers:\n", port);
+
+ mvOsPrintf("ETH_PORT_STATUS_REG : 0x%X = 0x%08x\n",
+ ETH_PORT_STATUS_REG(port),
+ MV_REG_READ( ETH_PORT_STATUS_REG(port) ) );
+
+ mvOsPrintf("ETH_PORT_SERIAL_CTRL_REG : 0x%X = 0x%08x\n",
+ ETH_PORT_SERIAL_CTRL_REG(port),
+ MV_REG_READ( ETH_PORT_SERIAL_CTRL_REG(port) ) );
+
+ mvOsPrintf("ETH_PORT_CONFIG_REG : 0x%X = 0x%08x\n",
+ ETH_PORT_CONFIG_REG(port),
+ MV_REG_READ( ETH_PORT_CONFIG_REG(port) ) );
+
+ mvOsPrintf("ETH_PORT_CONFIG_EXTEND_REG : 0x%X = 0x%08x\n",
+ ETH_PORT_CONFIG_EXTEND_REG(port),
+ MV_REG_READ( ETH_PORT_CONFIG_EXTEND_REG(port) ) );
+
+ mvOsPrintf("ETH_SDMA_CONFIG_REG : 0x%X = 0x%08x\n",
+ ETH_SDMA_CONFIG_REG(port),
+ MV_REG_READ( ETH_SDMA_CONFIG_REG(port) ) );
+
+ mvOsPrintf("ETH_TX_FIFO_URGENT_THRESH_REG : 0x%X = 0x%08x\n",
+ ETH_TX_FIFO_URGENT_THRESH_REG(port),
+ MV_REG_READ( ETH_TX_FIFO_URGENT_THRESH_REG(port) ) );
+
+ mvOsPrintf("ETH_RX_QUEUE_COMMAND_REG : 0x%X = 0x%08x\n",
+ ETH_RX_QUEUE_COMMAND_REG(port),
+ MV_REG_READ( ETH_RX_QUEUE_COMMAND_REG(port) ) );
+
+ mvOsPrintf("ETH_TX_QUEUE_COMMAND_REG : 0x%X = 0x%08x\n",
+ ETH_TX_QUEUE_COMMAND_REG(port),
+ MV_REG_READ( ETH_TX_QUEUE_COMMAND_REG(port) ) );
+
+ mvOsPrintf("ETH_INTR_CAUSE_REG : 0x%X = 0x%08x\n",
+ ETH_INTR_CAUSE_REG(port),
+ MV_REG_READ( ETH_INTR_CAUSE_REG(port) ) );
+
+ mvOsPrintf("ETH_INTR_EXTEND_CAUSE_REG : 0x%X = 0x%08x\n",
+ ETH_INTR_CAUSE_EXT_REG(port),
+ MV_REG_READ( ETH_INTR_CAUSE_EXT_REG(port) ) );
+
+ mvOsPrintf("ETH_INTR_MASK_REG : 0x%X = 0x%08x\n",
+ ETH_INTR_MASK_REG(port),
+ MV_REG_READ( ETH_INTR_MASK_REG(port) ) );
+
+ mvOsPrintf("ETH_INTR_EXTEND_MASK_REG : 0x%X = 0x%08x\n",
+ ETH_INTR_MASK_EXT_REG(port),
+ MV_REG_READ( ETH_INTR_MASK_EXT_REG(port) ) );
+
+ mvOsPrintf("ETH_RX_DESCR_STAT_CMD_REG : 0x%X = 0x%08x\n",
+ ETH_RX_DESCR_STAT_CMD_REG(port, 0),
+ MV_REG_READ( ETH_RX_DESCR_STAT_CMD_REG(port, 0) ) );
+
+ mvOsPrintf("ETH_RX_BYTE_COUNT_REG : 0x%X = 0x%08x\n",
+ ETH_RX_BYTE_COUNT_REG(port, 0),
+ MV_REG_READ( ETH_RX_BYTE_COUNT_REG(port, 0) ) );
+
+ mvOsPrintf("ETH_RX_BUF_PTR_REG : 0x%X = 0x%08x\n",
+ ETH_RX_BUF_PTR_REG(port, 0),
+ MV_REG_READ( ETH_RX_BUF_PTR_REG(port, 0) ) );
+
+ mvOsPrintf("ETH_RX_CUR_DESC_PTR_REG : 0x%X = 0x%08x\n",
+ ETH_RX_CUR_DESC_PTR_REG(port, 0),
+ MV_REG_READ( ETH_RX_CUR_DESC_PTR_REG(port, 0) ) );
+}
+
+
+/* Print Giga Ethernet UNIT registers */
+void ethRegs(int port)
+{
+ mvOsPrintf("ETH_PHY_ADDR_REG : 0x%X = 0x%08x\n",
+ ETH_PHY_ADDR_REG(port),
+ MV_REG_READ(ETH_PHY_ADDR_REG(port)) );
+
+ mvOsPrintf("ETH_UNIT_INTR_CAUSE_REG : 0x%X = 0x%08x\n",
+ ETH_UNIT_INTR_CAUSE_REG(port),
+ MV_REG_READ( ETH_UNIT_INTR_CAUSE_REG(port)) );
+
+ mvOsPrintf("ETH_UNIT_INTR_MASK_REG : 0x%X = 0x%08x\n",
+ ETH_UNIT_INTR_MASK_REG(port),
+ MV_REG_READ( ETH_UNIT_INTR_MASK_REG(port)) );
+
+ mvOsPrintf("ETH_UNIT_ERROR_ADDR_REG : 0x%X = 0x%08x\n",
+ ETH_UNIT_ERROR_ADDR_REG(port),
+ MV_REG_READ(ETH_UNIT_ERROR_ADDR_REG(port)) );
+
+ mvOsPrintf("ETH_UNIT_INT_ADDR_ERROR_REG : 0x%X = 0x%08x\n",
+ ETH_UNIT_INT_ADDR_ERROR_REG(port),
+ MV_REG_READ(ETH_UNIT_INT_ADDR_ERROR_REG(port)) );
+
+}
+
+/******************************************************************************/
+/* MIB Counters functions */
+/******************************************************************************/
+
+/*******************************************************************************
+* ethClearMibCounters - Clear all MIB counters
+*
+* DESCRIPTION:
+* This function clears all MIB counters of a specific ethernet port.
+* A read from the MIB counter will reset the counter.
+*
+* INPUT:
+* int port - Ethernet Port number.
+*
+* RETURN: None
+*
+*******************************************************************************/
+void ethClearCounters(int port)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ mvEthMibCountersClear(pHndl);
+
+ return;
+}
+
+
+/* Print counters of the Ethernet port */
+void ethPortCounters(int port)
+{
+ MV_U32 regValue, regValHigh;
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl == NULL)
+ return;
+
+ mvOsPrintf("\n\t Port #%d MIB Counters\n\n", port);
+
+ mvOsPrintf("GoodFramesReceived = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_GOOD_FRAMES_RECEIVED, NULL));
+ mvOsPrintf("BadFramesReceived = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_BAD_FRAMES_RECEIVED, NULL));
+ mvOsPrintf("BroadcastFramesReceived = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_BROADCAST_FRAMES_RECEIVED, NULL));
+ mvOsPrintf("MulticastFramesReceived = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_MULTICAST_FRAMES_RECEIVED, NULL));
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_GOOD_OCTETS_RECEIVED_LOW,
+ ®ValHigh);
+ mvOsPrintf("GoodOctetsReceived = 0x%08x%08x\n",
+ regValHigh, regValue);
+
+ mvOsPrintf("\n");
+ mvOsPrintf("GoodFramesSent = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_GOOD_FRAMES_SENT, NULL));
+ mvOsPrintf("BroadcastFramesSent = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_BROADCAST_FRAMES_SENT, NULL));
+ mvOsPrintf("MulticastFramesSent = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_MULTICAST_FRAMES_SENT, NULL));
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_GOOD_OCTETS_SENT_LOW,
+ ®ValHigh);
+ mvOsPrintf("GoodOctetsSent = 0x%08x%08x\n", regValHigh, regValue);
+
+
+ mvOsPrintf("\n\t FC Control Counters\n");
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_UNREC_MAC_CONTROL_RECEIVED, NULL);
+ mvOsPrintf("UnrecogMacControlReceived = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_GOOD_FC_RECEIVED, NULL);
+ mvOsPrintf("GoodFCFramesReceived = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_BAD_FC_RECEIVED, NULL);
+ mvOsPrintf("BadFCFramesReceived = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_FC_SENT, NULL);
+ mvOsPrintf("FCFramesSent = %u\n", regValue);
+
+
+ mvOsPrintf("\n\t RX Errors\n");
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_BAD_OCTETS_RECEIVED, NULL);
+ mvOsPrintf("BadOctetsReceived = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_UNDERSIZE_RECEIVED, NULL);
+ mvOsPrintf("UndersizeFramesReceived = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_FRAGMENTS_RECEIVED, NULL);
+ mvOsPrintf("FragmentsReceived = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_OVERSIZE_RECEIVED, NULL);
+ mvOsPrintf("OversizeFramesReceived = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_JABBER_RECEIVED, NULL);
+ mvOsPrintf("JabbersReceived = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_MAC_RECEIVE_ERROR, NULL);
+ mvOsPrintf("MacReceiveErrors = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_BAD_CRC_EVENT, NULL);
+ mvOsPrintf("BadCrcReceived = %u\n", regValue);
+
+ mvOsPrintf("\n\t TX Errors\n");
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR, NULL);
+ mvOsPrintf("TxMacErrors = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_EXCESSIVE_COLLISION, NULL);
+ mvOsPrintf("TxExcessiveCollisions = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_COLLISION, NULL);
+ mvOsPrintf("TxCollisions = %u\n", regValue);
+
+ regValue = mvEthMibCounterRead(pHndl, ETH_MIB_LATE_COLLISION, NULL);
+ mvOsPrintf("TxLateCollisions = %u\n", regValue);
+
+
+ mvOsPrintf("\n");
+ regValue = MV_REG_READ( ETH_RX_DISCARD_PKTS_CNTR_REG(port));
+ mvOsPrintf("Rx Discard packets counter = %u\n", regValue);
+
+ regValue = MV_REG_READ(ETH_RX_OVERRUN_PKTS_CNTR_REG(port));
+ mvOsPrintf("Rx Overrun packets counter = %u\n", regValue);
+}
+
+/* Print RMON counters of the Ethernet port */
+void ethPortRmonCounters(int port)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl == NULL)
+ return;
+
+ mvOsPrintf("\n\t Port #%d RMON MIB Counters\n\n", port);
+
+ mvOsPrintf("64 ByteFramesReceived = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_64_OCTETS, NULL));
+ mvOsPrintf("65...127 ByteFramesReceived = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_65_TO_127_OCTETS, NULL));
+ mvOsPrintf("128...255 ByteFramesReceived = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_128_TO_255_OCTETS, NULL));
+ mvOsPrintf("256...511 ByteFramesReceived = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_256_TO_511_OCTETS, NULL));
+ mvOsPrintf("512...1023 ByteFramesReceived = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_512_TO_1023_OCTETS, NULL));
+ mvOsPrintf("1024...Max ByteFramesReceived = %u\n",
+ mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_1024_TO_MAX_OCTETS, NULL));
+}
+
+/* Print port information */
+void ethPortStatus(int port)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvEthPortShow(pHndl);
+ }
+}
+
+/* Print port queues information */
+void ethPortQueues(int port, int rxQueue, int txQueue, int mode)
+{
+ void* pHndl;
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvEthQueuesShow(pHndl, rxQueue, txQueue, mode);
+ }
+}
+
+void ethUcastSet(int port, char* macStr, int queue)
+{
+ void* pHndl;
+ MV_U8 macAddr[MV_MAC_ADDR_SIZE];
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvMacStrToHex(macStr, macAddr);
+ mvEthMacAddrSet(pHndl, macAddr, queue);
+ }
+}
+
+
+void ethPortUcastShow(int port)
+{
+ MV_U32 unicastReg, macL, macH;
+ int i, j;
+
+ macL = MV_REG_READ(ETH_MAC_ADDR_LOW_REG(port));
+ macH = MV_REG_READ(ETH_MAC_ADDR_HIGH_REG(port));
+
+ mvOsPrintf("\n\t Port #%d Unicast MAC table: %02x:%02x:%02x:%02x:%02x:%02x\n\n",
+ port, ((macH >> 24) & 0xff), ((macH >> 16) & 0xff),
+ ((macH >> 8) & 0xff), (macH & 0xff),
+ ((macL >> 8) & 0xff), (macL & 0xff) );
+
+ for (i=0; i<4; i++)
+ {
+ unicastReg = MV_REG_READ( (ETH_DA_FILTER_UCAST_BASE(port) + i*4));
+ for(j=0; j<4; j++)
+ {
+ MV_U8 macEntry = (unicastReg >> (8*j)) & 0xFF;
+
+ mvOsPrintf("%X: %8s, Q = %d\n", i*4+j,
+ (macEntry & BIT0) ? "Accept" : "Reject", (macEntry >> 1) & 0x7);
+ }
+ }
+}
+
+void ethMcastAdd(int port, char* macStr, int queue)
+{
+ void* pHndl;
+ MV_U8 macAddr[MV_MAC_ADDR_SIZE];
+
+ pHndl = mvEthPortHndlGet(port);
+ if(pHndl != NULL)
+ {
+ mvMacStrToHex(macStr, macAddr);
+ mvEthMcastAddrSet(pHndl, macAddr, queue);
+ }
+}
+
+void ethPortMcast(int port)
+{
+ int tblIdx, regIdx;
+ MV_U32 regVal;
+
+ mvOsPrintf("\n\t Port #%d Special (IP) Multicast table: 01:00:5E:00:00:XX\n\n",
+ port);
+
+ for(tblIdx=0; tblIdx<(256/4); tblIdx++)
+ {
+ regVal = MV_REG_READ((ETH_DA_FILTER_SPEC_MCAST_BASE(port) + tblIdx*4));
+ for(regIdx=0; regIdx<4; regIdx++)
+ {
+ if((regVal & (0x01 << (regIdx*8))) != 0)
+ {
+ mvOsPrintf("0x%02X: Accepted, rxQ = %d\n",
+ tblIdx*4+regIdx, ((regVal >> (regIdx*8+1)) & 0x07));
+ }
+ }
+ }
+ mvOsPrintf("\n\t Port #%d Other Multicast table\n\n", port);
+ for(tblIdx=0; tblIdx<(256/4); tblIdx++)
+ {
+ regVal = MV_REG_READ((ETH_DA_FILTER_OTH_MCAST_BASE(port) + tblIdx*4));
+ for(regIdx=0; regIdx<4; regIdx++)
+ {
+ if((regVal & (0x01 << (regIdx*8))) != 0)
+ {
+ mvOsPrintf("Crc8=0x%02X: Accepted, rxQ = %d\n",
+ tblIdx*4+regIdx, ((regVal >> (regIdx*8+1)) & 0x07));
+ }
+ }
+ }
+}
+
+
+/* Print status of Ethernet port */
+void mvEthPortShow(void* pHndl)
+{
+ MV_U32 regValue, rxCoal, txCoal;
+ int speed, queue, port;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pHndl;
+
+ port = pPortCtrl->portNo;
+
+ regValue = MV_REG_READ( ETH_PORT_STATUS_REG(port) );
+
+ mvOsPrintf("\n\t ethGiga #%d port Status: 0x%04x = 0x%08x\n\n",
+ port, ETH_PORT_STATUS_REG(port), regValue);
+
+ mvOsPrintf("descInSram=%d, descSwCoher=%d\n",
+ ethDescInSram, ethDescSwCoher);
+
+ if(regValue & ETH_GMII_SPEED_1000_MASK)
+ speed = 1000;
+ else if(regValue & ETH_MII_SPEED_100_MASK)
+ speed = 100;
+ else
+ speed = 10;
+
+ mvEthCoalGet(pPortCtrl, &rxCoal, &txCoal);
+
+ /* Link, Speed, Duplex, FlowControl */
+ mvOsPrintf("Link=%s, Speed=%d, Duplex=%s, RxFlowControl=%s",
+ (regValue & ETH_LINK_UP_MASK) ? "UP" : "DOWN",
+ speed,
+ (regValue & ETH_FULL_DUPLEX_MASK) ? "FULL" : "HALF",
+ (regValue & ETH_ENABLE_RCV_FLOW_CTRL_MASK) ? "ENABLE" : "DISABLE");
+
+ mvOsPrintf("\n");
+
+ mvOsPrintf("RxCoal = %d usec, TxCoal = %d usec\n",
+ rxCoal, txCoal);
+
+ mvOsPrintf("rxDefQ=%d, arpQ=%d, bpduQ=%d, tcpQ=%d, udpQ=%d\n\n",
+ pPortCtrl->portConfig.rxDefQ, pPortCtrl->portConfig.rxArpQ,
+ pPortCtrl->portConfig.rxBpduQ,
+ pPortCtrl->portConfig.rxTcpQ, pPortCtrl->portConfig.rxUdpQ);
+
+ /* Print all RX and TX queues */
+ for(queue=0; queue<MV_ETH_RX_Q_NUM; queue++)
+ {
+ mvOsPrintf("RX Queue #%d: base=0x%lx, free=%d\n",
+ queue, (MV_ULONG)pPortCtrl->rxQueue[queue].pFirstDescr,
+ mvEthRxResourceGet(pPortCtrl, queue) );
+ }
+ mvOsPrintf("\n");
+ for(queue=0; queue<MV_ETH_TX_Q_NUM; queue++)
+ {
+ mvOsPrintf("TX Queue #%d: base=0x%lx, free=%d\n",
+ queue, (MV_ULONG)pPortCtrl->txQueue[queue].pFirstDescr,
+ mvEthTxResourceGet(pPortCtrl, queue) );
+ }
+}
+
+/* Print RX and TX queue of the Ethernet port */
+void mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode)
+{
+ ETH_PORT_CTRL *pPortCtrl = (ETH_PORT_CTRL*)pHndl;
+ ETH_QUEUE_CTRL *pQueueCtrl;
+ MV_U32 regValue;
+ ETH_RX_DESC *pRxDescr;
+ ETH_TX_DESC *pTxDescr;
+ int i, port = pPortCtrl->portNo;
+
+ if( (rxQueue >=0) && (rxQueue < MV_ETH_RX_Q_NUM) )
+ {
+ pQueueCtrl = &(pPortCtrl->rxQueue[rxQueue]);
+ mvOsPrintf("Port #%d, RX Queue #%d\n\n", port, rxQueue);
+
+ mvOsPrintf("CURR_RX_DESC_PTR : 0x%X = 0x%08x\n",
+ ETH_RX_CUR_DESC_PTR_REG(port, rxQueue),
+ MV_REG_READ( ETH_RX_CUR_DESC_PTR_REG(port, rxQueue)));
+
+
+ if(pQueueCtrl->pFirstDescr != NULL)
+ {
+ mvOsPrintf("pFirstDescr=0x%lx, pLastDescr=0x%lx, numOfResources=%d\n",
+ (MV_ULONG)pQueueCtrl->pFirstDescr, (MV_ULONG)pQueueCtrl->pLastDescr,
+ pQueueCtrl->resource);
+ mvOsPrintf("pCurrDescr: 0x%lx, pUsedDescr: 0x%lx\n",
+ (MV_ULONG)pQueueCtrl->pCurrentDescr,
+ (MV_ULONG)pQueueCtrl->pUsedDescr);
+
+ if(mode == 1)
+ {
+ pRxDescr = (ETH_RX_DESC*)pQueueCtrl->pFirstDescr;
+ i = 0;
+ do
+ {
+ mvOsPrintf("%3d. desc=%08x (%08x), cmd=%08x, data=%4d, buf=%4d, buf=%08x, pkt=%lx, os=%lx\n",
+ i, (MV_U32)pRxDescr, (MV_U32)ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pRxDescr),
+ pRxDescr->cmdSts, pRxDescr->byteCnt, (MV_U32)pRxDescr->bufSize,
+ (unsigned int)pRxDescr->bufPtr, (MV_ULONG)pRxDescr->returnInfo,
+ ((MV_PKT_INFO*)pRxDescr->returnInfo)->osInfo);
+
+ ETH_DESCR_INV(pPortCtrl, pRxDescr);
+ pRxDescr = RX_NEXT_DESC_PTR(pRxDescr, pQueueCtrl);
+ i++;
+ } while (pRxDescr != pQueueCtrl->pFirstDescr);
+ }
+ }
+ else
+ mvOsPrintf("RX Queue #%d is NOT CREATED\n", rxQueue);
+ }
+
+ if( (txQueue >=0) && (txQueue < MV_ETH_TX_Q_NUM) )
+ {
+ pQueueCtrl = &(pPortCtrl->txQueue[txQueue]);
+ mvOsPrintf("Port #%d, TX Queue #%d\n\n", port, txQueue);
+
+ regValue = MV_REG_READ( ETH_TX_CUR_DESC_PTR_REG(port, txQueue));
+ mvOsPrintf("CURR_TX_DESC_PTR : 0x%X = 0x%08x\n",
+ ETH_TX_CUR_DESC_PTR_REG(port, txQueue), regValue);
+
+ if(pQueueCtrl->pFirstDescr != NULL)
+ {
+ mvOsPrintf("pFirstDescr=0x%lx, pLastDescr=0x%lx, numOfResources=%d\n",
+ (MV_ULONG)pQueueCtrl->pFirstDescr,
+ (MV_ULONG)pQueueCtrl->pLastDescr,
+ pQueueCtrl->resource);
+ mvOsPrintf("pCurrDescr: 0x%lx, pUsedDescr: 0x%lx\n",
+ (MV_ULONG)pQueueCtrl->pCurrentDescr,
+ (MV_ULONG)pQueueCtrl->pUsedDescr);
+
+ if(mode == 1)
+ {
+ pTxDescr = (ETH_TX_DESC*)pQueueCtrl->pFirstDescr;
+ i = 0;
+ do
+ {
+ mvOsPrintf("%3d. desc=%08x (%08x), cmd=%08x, data=%4d, buf=%08x, pkt=%lx, os=%lx\n",
+ i, (MV_U32)pTxDescr, (MV_U32)ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxDescr),
+ pTxDescr->cmdSts, pTxDescr->byteCnt,
+ (MV_U32)pTxDescr->bufPtr, (MV_ULONG)pTxDescr->returnInfo,
+ pTxDescr->returnInfo ? (((MV_PKT_INFO*)pTxDescr->returnInfo)->osInfo) : 0x0);
+
+ ETH_DESCR_INV(pPortCtrl, pTxDescr);
+ pTxDescr = TX_NEXT_DESC_PTR(pTxDescr, pQueueCtrl);
+ i++;
+ } while (pTxDescr != pQueueCtrl->pFirstDescr);
+ }
+ }
+ else
+ mvOsPrintf("TX Queue #%d is NOT CREATED\n", txQueue);
+ }
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __MV_ETH_DEBUG_H__
+#define __MV_ETH_DEBUG_H__
+
+#if 0
+/*
+ ** Externs
+ */
+void ethBpduRxQ(int port, int bpduQueue);
+void ethArpRxQ(int port, int bpduQueue);
+void ethTcpRxQ(int port, int bpduQueue);
+void ethUdpRxQ(int port, int bpduQueue);
+void ethMcastAdd(int port, char* macStr, int queue);
+
+#ifdef INCLUDE_MULTI_QUEUE
+void ethRxPolicy( int port);
+void ethTxPolicy( int port);
+void ethTxPolDA(int port, char* macStr, int txQ, char* headerHexStr);
+void ethRxPolMode(int port, MV_ETH_PRIO_MODE prioMode);
+void ethRxPolQ(int port, int rxQueue, int rxQuota);
+#endif /* INCLUDE_MULTI_QUEUE */
+
+void print_egiga_stat(void *sc, unsigned int port);
+void ethPortStatus (int port);
+void ethPortQueues( int port, int rxQueue, int txQueue, int mode);
+void ethPortMcast(int port);
+void ethPortRegs(int port);
+void ethPortCounters(int port);
+void ethPortRmonCounters(int port);
+void ethRxCoal(int port, int usec);
+void ethTxCoal(int port, int usec);
+
+void ethRegs(int port);
+void ethClearCounters(int port);
+void ethUcastSet(int port, char* macStr, int queue);
+void ethPortUcastShow(int port);
+
+#ifdef CONFIG_MV_ETH_HEADER
+void run_com_header(const char *buffer);
+#endif
+
+#ifdef INCLUDE_MULTI_QUEUE
+void ethRxPolMode(int port, MV_ETH_PRIO_MODE prioMode);
+void ethRxPolQ(int port, int queue, int quota);
+void ethRxPolicy(int port);
+void ethTxPolDef(int port, int txQ, char* headerHexStr);
+void ethTxPolDA(int port, char* macStr, int txQ, char* headerHexStr);
+void ethTxPolicy(int port);
+#endif /* INCLUDE_MULTI_QUEUE */
+
+#if (MV_ETH_VERSION >= 4)
+void ethEjpModeSet(int port, int mode)
+#endif
+#endif /* 0 */
+
+
+
+
+void ethRxCoal(int port, int usec);
+void ethTxCoal(int port, int usec);
+#if (MV_ETH_VERSION >= 4)
+void ethEjpModeSet(int port, int mode);
+#endif /* (MV_ETH_VERSION >= 4) */
+
+void ethBpduRxQ(int port, int bpduQueue);
+void ethArpRxQ(int port, int arpQueue);
+void ethTcpRxQ(int port, int tcpQueue);
+void ethUdpRxQ(int port, int udpQueue);
+void ethTxPolicyRegs(int port);
+void ethPortRegs(int port);
+void ethRegs(int port);
+void ethClearCounters(int port);
+void ethPortCounters(int port);
+void ethPortRmonCounters(int port);
+void ethPortStatus(int port);
+void ethPortQueues(int port, int rxQueue, int txQueue, int mode);
+void ethUcastSet(int port, char* macStr, int queue);
+void ethPortUcastShow(int port);
+void ethMcastAdd(int port, char* macStr, int queue);
+void ethPortMcast(int port);
+void mvEthPortShow(void* pHndl);
+void mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode);
+
+#endif
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvEth.h - Header File for : Marvell Gigabit Ethernet Controller
+*
+* DESCRIPTION:
+* This header file contains macros typedefs and function declaration specific to
+* the Marvell Gigabit Ethernet Controller.
+*
+* DEPENDENCIES:
+* None.
+*
+*******************************************************************************/
+
+#ifndef __mvEthGbe_h__
+#define __mvEthGbe_h__
+
+extern MV_BOOL ethDescInSram;
+extern MV_BOOL ethDescSwCoher;
+extern ETH_PORT_CTRL* ethPortCtrl[];
+
+static INLINE MV_ULONG ethDescVirtToPhy(ETH_QUEUE_CTRL* pQueueCtrl, MV_U8* pDesc)
+{
+#if defined (ETH_DESCR_IN_SRAM)
+ if( ethDescInSram )
+ return mvSramVirtToPhy(pDesc);
+ else
+#endif /* ETH_DESCR_IN_SRAM */
+ return (pQueueCtrl->descBuf.bufPhysAddr + (pDesc - pQueueCtrl->descBuf.bufVirtPtr));
+}
+/* Return port handler */
+#define mvEthPortHndlGet(port) ethPortCtrl[port]
+
+/* Used as WA for HW/SW race on TX */
+static INLINE int mvEthPortTxEnable(void* pPortHndl, int queue, int max_deep)
+{
+ int deep = 0;
+ MV_U32 txCurrReg, txEnReg;
+ ETH_TX_DESC* pTxLastDesc;
+ ETH_QUEUE_CTRL* pQueueCtrl;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+ txEnReg = MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo));
+ if( (txEnReg & MV_32BIT_LE_FAST(ETH_TXQ_ENABLE_MASK)) == 0)
+ {
+ MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg;
+ return 0;
+ }
+
+ pQueueCtrl = &pPortCtrl->txQueue[queue];
+ pTxLastDesc = pQueueCtrl->pCurrentDescr;
+ txCurrReg = MV_REG_READ(ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue));
+ if(ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxLastDesc) == txCurrReg)
+ {
+ /* All descriptors are processed, no chance for race */
+ return 0;
+ }
+
+ /* Check distance betwee HW and SW location: */
+ /* If distance between HW and SW pointers is less than max_deep descriptors */
+ /* Race condition is possible, so wait end of TX and restart TXQ */
+ while(deep < max_deep)
+ {
+ pTxLastDesc = TX_PREV_DESC_PTR(pTxLastDesc, pQueueCtrl);
+ if(ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxLastDesc) == txCurrReg)
+ {
+ int count = 0;
+
+ while( (txEnReg & MV_32BIT_LE_FAST(ETH_TXQ_ENABLE_MASK)) != 0)
+ {
+ count++;
+ if(count > 10000)
+ {
+ mvOsPrintf("mvEthPortTxEnable: timeout - TXQ_CMD=0x%08x\n",
+ MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) );
+ break;
+ }
+ txEnReg = MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo));
+ }
+
+ MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg;
+ return count;
+ }
+ deep++;
+ }
+ /* Distance between HW and SW pointers is more than max_deep descriptors, */
+ /* So NO race condition - do nothing */
+ return -1;
+}
+
+
+/* defines */
+#define ETH_CSUM_MIN_BYTE_COUNT 72
+
+/* Tailgate and Kirwood have only 2K TX FIFO */
+#if (MV_ETH_VERSION == 2) || (MV_ETH_VERSION == 4)
+#define ETH_CSUM_MAX_BYTE_COUNT 1600
+#else
+#define ETH_CSUM_MAX_BYTE_COUNT 9*1024
+#endif /* MV_ETH_VERSION */
+
+#define ETH_MV_HEADER_SIZE 2
+#define ETH_MV_TX_EN
+
+/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
+#define MIN_TX_BUFF_LOAD 8
+#define TX_BUF_OFFSET_IN_DESC (ETH_TX_DESC_ALIGNED_SIZE - MIN_TX_BUFF_LOAD)
+
+/* Default port configuration value */
+#define PORT_CONFIG_VALUE \
+ ETH_DEF_RX_QUEUE_MASK(0) | \
+ ETH_DEF_RX_ARP_QUEUE_MASK(0) | \
+ ETH_DEF_RX_TCP_QUEUE_MASK(0) | \
+ ETH_DEF_RX_UDP_QUEUE_MASK(0) | \
+ ETH_DEF_RX_BPDU_QUEUE_MASK(0) | \
+ ETH_RX_CHECKSUM_WITH_PSEUDO_HDR
+
+/* Default port extend configuration value */
+#define PORT_CONFIG_EXTEND_VALUE 0
+
+#define PORT_SERIAL_CONTROL_VALUE \
+ ETH_DISABLE_FC_AUTO_NEG_MASK | \
+ BIT9 | \
+ ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \
+ ETH_MAX_RX_PACKET_1552BYTE | \
+ ETH_SET_FULL_DUPLEX_MASK
+
+#define PORT_SERIAL_CONTROL_100MB_FORCE_VALUE \
+ ETH_FORCE_LINK_PASS_MASK | \
+ ETH_DISABLE_DUPLEX_AUTO_NEG_MASK | \
+ ETH_DISABLE_FC_AUTO_NEG_MASK | \
+ BIT9 | \
+ ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \
+ ETH_DISABLE_SPEED_AUTO_NEG_MASK | \
+ ETH_SET_FULL_DUPLEX_MASK | \
+ ETH_SET_MII_SPEED_100_MASK | \
+ ETH_MAX_RX_PACKET_1552BYTE
+
+
+#define PORT_SERIAL_CONTROL_1000MB_FORCE_VALUE \
+ ETH_FORCE_LINK_PASS_MASK | \
+ ETH_DISABLE_DUPLEX_AUTO_NEG_MASK | \
+ ETH_DISABLE_FC_AUTO_NEG_MASK | \
+ BIT9 | \
+ ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \
+ ETH_DISABLE_SPEED_AUTO_NEG_MASK | \
+ ETH_SET_FULL_DUPLEX_MASK | \
+ ETH_SET_GMII_SPEED_1000_MASK | \
+ ETH_MAX_RX_PACKET_1552BYTE
+
+#define PORT_SERIAL_CONTROL_SGMII_IBAN_VALUE \
+ ETH_DISABLE_FC_AUTO_NEG_MASK | \
+ BIT9 | \
+ ETH_IN_BAND_AN_EN_MASK | \
+ ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \
+ ETH_MAX_RX_PACKET_1552BYTE
+
+/* Function headers: */
+MV_VOID mvEthSetSpecialMcastTable(int portNo, int queue);
+MV_STATUS mvEthArpRxQueue(void* pPortHandle, int arpQueue);
+MV_STATUS mvEthUdpRxQueue(void* pPortHandle, int udpQueue);
+MV_STATUS mvEthTcpRxQueue(void* pPortHandle, int tcpQueue);
+MV_STATUS mvEthMacAddrGet(int portNo, unsigned char *pAddr);
+MV_VOID mvEthSetOtherMcastTable(int portNo, int queue);
+MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode);
+/* Interrupt Coalesting functions */
+MV_U32 mvEthRxCoalSet(void* pPortHndl, MV_U32 uSec);
+MV_U32 mvEthTxCoalSet(void* pPortHndl, MV_U32 uSec);
+MV_STATUS mvEthCoalGet(void* pPortHndl, MV_U32* pRxCoal, MV_U32* pTxCoal);
+
+/******************************************************************************/
+/* Data Flow functions */
+/******************************************************************************/
+static INLINE void mvEthPortTxRestart(void* pPortHndl)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+ MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg;
+}
+
+/* Get number of Free resources in specific TX queue */
+static INLINE int mvEthTxResourceGet(void* pPortHndl, int txQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+ return (pPortCtrl->txQueue[txQueue].resource);
+}
+
+/* Get number of Free resources in specific RX queue */
+static INLINE int mvEthRxResourceGet(void* pPortHndl, int rxQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+ return (pPortCtrl->rxQueue[rxQueue].resource);
+}
+
+static INLINE int mvEthTxQueueIsFull(void* pPortHndl, int txQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+ if(pPortCtrl->txQueue[txQueue].resource == 0)
+ return MV_TRUE;
+
+ return MV_FALSE;
+}
+
+/* Get number of Free resources in specific RX queue */
+static INLINE int mvEthRxQueueIsFull(void* pPortHndl, int rxQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->rxQueue[rxQueue];
+
+ if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) &&
+ (pQueueCtrl->resource != 0) )
+ return MV_TRUE;
+
+ return MV_FALSE;
+}
+
+static INLINE int mvEthTxQueueIsEmpty(void* pPortHndl, int txQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+ ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->txQueue[txQueue];
+
+ if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) &&
+ (pQueueCtrl->resource != 0) )
+ {
+ return MV_TRUE;
+ }
+ return MV_FALSE;
+}
+
+/* Get number of Free resources in specific RX queue */
+static INLINE int mvEthRxQueueIsEmpty(void* pPortHndl, int rxQueue)
+{
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+ if(pPortCtrl->rxQueue[rxQueue].resource == 0)
+ return MV_TRUE;
+
+ return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvEthPortTx - Send an Ethernet packet
+*
+* DESCRIPTION:
+* This routine send a given packet described by pPktInfo parameter.
+* Single buffer only.
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet Port handler.
+* int txQueue - Number of Tx queue.
+* MV_PKT_INFO *pPktInfo - User packet to send.
+*
+* RETURN:
+* MV_NO_RESOURCE - No enough resources to send this packet.
+* MV_ERROR - Unexpected Fatal error.
+* MV_OK - Packet send successfully.
+*
+*******************************************************************************/
+static INLINE MV_STATUS mvEthPortTx(void* pEthPortHndl, int txQueue, MV_PKT_INFO* pPktInfo)
+{
+ ETH_TX_DESC* pTxCurrDesc;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+ ETH_QUEUE_CTRL* pQueueCtrl;
+ int portNo;
+ MV_BUF_INFO* pBufInfo = pPktInfo->pFrags;
+
+#ifdef ETH_DEBUG
+ if(pPortCtrl->portState != MV_ACTIVE)
+ return MV_BAD_STATE;
+#endif /* ETH_DEBUG */
+
+ portNo = pPortCtrl->portNo;
+ pQueueCtrl = &pPortCtrl->txQueue[txQueue];
+
+ /* Get the Tx Desc ring indexes */
+ pTxCurrDesc = pQueueCtrl->pCurrentDescr;
+
+ /* Check if there is enough resources to send the packet */
+ if(pQueueCtrl->resource == 0)
+ return MV_NO_RESOURCE;
+
+ pTxCurrDesc->byteCnt = pBufInfo->dataSize;
+
+ /* Flash Buffer */
+ if(pPktInfo->pktSize != 0)
+ {
+#ifdef MV_NETBSD
+ pTxCurrDesc->bufPtr = pBufInfo->bufPhysAddr;
+ ETH_PACKET_CACHE_FLUSH(pBufInfo->bufVirtPtr, pPktInfo->pktSize);
+#else
+ pTxCurrDesc->bufPtr = ETH_PACKET_CACHE_FLUSH(pBufInfo->bufVirtPtr, pPktInfo->pktSize);
+#endif
+ pPktInfo->pktSize = 0;
+ }
+ else
+ pTxCurrDesc->bufPtr = pBufInfo->bufPhysAddr;
+
+ pTxCurrDesc->returnInfo = (MV_ULONG)pPktInfo;
+
+ /* There is only one buffer in the packet */
+ /* The OSG might set some bits for checksum offload, so add them to first descriptor */
+ pTxCurrDesc->cmdSts = pPktInfo->status |
+ ETH_BUFFER_OWNED_BY_DMA |
+ ETH_TX_GENERATE_CRC_MASK |
+ ETH_TX_ENABLE_INTERRUPT_MASK |
+ ETH_TX_ZERO_PADDING_MASK |
+ ETH_TX_FIRST_DESC_MASK |
+ ETH_TX_LAST_DESC_MASK;
+
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc);
+
+ pQueueCtrl->resource--;
+ pQueueCtrl->pCurrentDescr = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl);
+
+ /* Apply send command */
+ MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(portNo)) = pPortCtrl->portTxQueueCmdReg;
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvEthPortSgTx - Send an Ethernet packet
+*
+* DESCRIPTION:
+* This routine send a given packet described by pBufInfo parameter. It
+* supports transmitting of a packet spaned over multiple buffers.
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet Port handler.
+* int txQueue - Number of Tx queue.
+* MV_PKT_INFO *pPktInfo - User packet to send.
+*
+* RETURN:
+* MV_NO_RESOURCE - No enough resources to send this packet.
+* MV_ERROR - Unexpected Fatal error.
+* MV_OK - Packet send successfully.
+*
+*******************************************************************************/
+static INLINE MV_STATUS mvEthPortSgTx(void* pEthPortHndl, int txQueue, MV_PKT_INFO* pPktInfo)
+{
+ ETH_TX_DESC* pTxFirstDesc;
+ ETH_TX_DESC* pTxCurrDesc;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+ ETH_QUEUE_CTRL* pQueueCtrl;
+ int portNo, bufCount;
+ MV_BUF_INFO* pBufInfo = pPktInfo->pFrags;
+ MV_U8* pTxBuf;
+
+#ifdef ETH_DEBUG
+ if(pPortCtrl->portState != MV_ACTIVE)
+ return MV_BAD_STATE;
+#endif /* ETH_DEBUG */
+
+ portNo = pPortCtrl->portNo;
+ pQueueCtrl = &pPortCtrl->txQueue[txQueue];
+
+ /* Get the Tx Desc ring indexes */
+ pTxCurrDesc = pQueueCtrl->pCurrentDescr;
+
+ /* Check if there is enough resources to send the packet */
+ if(pQueueCtrl->resource < pPktInfo->numFrags)
+ return MV_NO_RESOURCE;
+
+ /* Remember first desc */
+ pTxFirstDesc = pTxCurrDesc;
+
+ bufCount = 0;
+ while(MV_TRUE)
+ {
+ if(pBufInfo[bufCount].dataSize <= MIN_TX_BUFF_LOAD)
+ {
+ /* Buffers with a payload smaller than MIN_TX_BUFF_LOAD (8 bytes) must be aligned */
+ /* to 64-bit boundary. Two options here: */
+ /* 1) Usually, copy the payload to the reserved 8 bytes inside descriptor. */
+ /* 2) In the Half duplex workaround, the reserved 8 bytes inside descriptor are used */
+ /* as a pointer to the aligned buffer, copy the small payload to this buffer. */
+ pTxBuf = ((MV_U8*)pTxCurrDesc)+TX_BUF_OFFSET_IN_DESC;
+ mvOsBCopy(pBufInfo[bufCount].bufVirtPtr, pTxBuf, pBufInfo[bufCount].dataSize);
+ pTxCurrDesc->bufPtr = ethDescVirtToPhy(pQueueCtrl, pTxBuf);
+ }
+ else
+ {
+ /* Flash Buffer */
+#ifdef MV_NETBSD
+ pTxCurrDesc->bufPtr = pBufInfo[bufCount].bufPhysAddr;
+ ETH_PACKET_CACHE_FLUSH(pBufInfo[bufCount].bufVirtPtr, pBufInfo[bufCount].dataSize);
+#else
+ pTxCurrDesc->bufPtr = ETH_PACKET_CACHE_FLUSH(pBufInfo[bufCount].bufVirtPtr, pBufInfo[bufCount].dataSize);
+#endif
+ }
+
+ pTxCurrDesc->byteCnt = pBufInfo[bufCount].dataSize;
+ bufCount++;
+
+ if(bufCount >= pPktInfo->numFrags)
+ break;
+
+ if(bufCount > 1)
+ {
+ /* There is middle buffer of the packet Not First and Not Last */
+ pTxCurrDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA;
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc);
+ }
+ /* Go to next descriptor and next buffer */
+ pTxCurrDesc = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl);
+ }
+ /* Set last desc with DMA ownership and interrupt enable. */
+ pTxCurrDesc->returnInfo = (MV_ULONG)pPktInfo;
+ if(bufCount == 1)
+ {
+ /* There is only one buffer in the packet */
+ /* The OSG might set some bits for checksum offload, so add them to first descriptor */
+ pTxCurrDesc->cmdSts = pPktInfo->status |
+ ETH_BUFFER_OWNED_BY_DMA |
+ ETH_TX_GENERATE_CRC_MASK |
+ ETH_TX_ENABLE_INTERRUPT_MASK |
+ ETH_TX_ZERO_PADDING_MASK |
+ ETH_TX_FIRST_DESC_MASK |
+ ETH_TX_LAST_DESC_MASK;
+
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc);
+ }
+ else
+ {
+ /* Last but not First */
+ pTxCurrDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA |
+ ETH_TX_ENABLE_INTERRUPT_MASK |
+ ETH_TX_ZERO_PADDING_MASK |
+ ETH_TX_LAST_DESC_MASK;
+
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc);
+
+ /* Update First when more than one buffer in the packet */
+ /* The OSG might set some bits for checksum offload, so add them to first descriptor */
+ pTxFirstDesc->cmdSts = pPktInfo->status |
+ ETH_BUFFER_OWNED_BY_DMA |
+ ETH_TX_GENERATE_CRC_MASK |
+ ETH_TX_FIRST_DESC_MASK;
+
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pTxFirstDesc);
+ }
+ /* Update txQueue state */
+ pQueueCtrl->resource -= bufCount;
+ pQueueCtrl->pCurrentDescr = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl);
+
+ /* Apply send command */
+ MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(portNo)) = pPortCtrl->portTxQueueCmdReg;
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthPortTxDone - Free all used Tx descriptors and mBlks.
+*
+* DESCRIPTION:
+* This routine returns the transmitted packet information to the caller.
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet Port handler.
+* int txQueue - Number of Tx queue.
+*
+* OUTPUT:
+* MV_PKT_INFO *pPktInfo - Pointer to packet was sent.
+*
+* RETURN:
+* MV_NOT_FOUND - No transmitted packets to return. Transmit in progress.
+* MV_EMPTY - No transmitted packets to return. TX Queue is empty.
+* MV_ERROR - Unexpected Fatal error.
+* MV_OK - There is transmitted packet in the queue,
+* 'pPktInfo' filled with relevant information.
+*
+*******************************************************************************/
+static INLINE MV_PKT_INFO* mvEthPortTxDone(void* pEthPortHndl, int txQueue)
+{
+ ETH_TX_DESC* pTxCurrDesc;
+ ETH_TX_DESC* pTxUsedDesc;
+ ETH_QUEUE_CTRL* pQueueCtrl;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+ MV_PKT_INFO* pPktInfo;
+ MV_U32 commandStatus;
+
+ pQueueCtrl = &pPortCtrl->txQueue[txQueue];
+
+ pTxUsedDesc = pQueueCtrl->pUsedDescr;
+ pTxCurrDesc = pQueueCtrl->pCurrentDescr;
+
+ while(MV_TRUE)
+ {
+ /* No more used descriptors */
+ commandStatus = pTxUsedDesc->cmdSts;
+ if (commandStatus & (ETH_BUFFER_OWNED_BY_DMA))
+ {
+ ETH_DESCR_INV(pPortCtrl, pTxUsedDesc);
+ return NULL;
+ }
+ if( (pTxUsedDesc == pTxCurrDesc) &&
+ (pQueueCtrl->resource != 0) )
+ {
+ return NULL;
+ }
+ pQueueCtrl->resource++;
+ pQueueCtrl->pUsedDescr = TX_NEXT_DESC_PTR(pTxUsedDesc, pQueueCtrl);
+ if(commandStatus & (ETH_TX_LAST_DESC_MASK))
+ {
+ pPktInfo = (MV_PKT_INFO*)pTxUsedDesc->returnInfo;
+ pPktInfo->status = commandStatus;
+ return pPktInfo;
+ }
+ pTxUsedDesc = pQueueCtrl->pUsedDescr;
+ }
+}
+
+/*******************************************************************************
+* mvEthPortRx - Get new received packets from Rx queue.
+*
+* DESCRIPTION:
+* This routine returns the received data to the caller. There is no
+* data copying during routine operation. All information is returned
+* using pointer to packet information struct passed from the caller.
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet Port handler.
+* int rxQueue - Number of Rx queue.
+*
+* OUTPUT:
+* MV_PKT_INFO *pPktInfo - Pointer to received packet.
+*
+* RETURN:
+* MV_NO_RESOURCE - No free resources in RX queue.
+* MV_ERROR - Unexpected Fatal error.
+* MV_OK - New packet received and 'pBufInfo' structure filled
+* with relevant information.
+*
+*******************************************************************************/
+static INLINE MV_PKT_INFO* mvEthPortRx(void* pEthPortHndl, int rxQueue)
+{
+ ETH_RX_DESC *pRxCurrDesc;
+ MV_U32 commandStatus;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+ ETH_QUEUE_CTRL* pQueueCtrl;
+ MV_PKT_INFO* pPktInfo;
+
+ pQueueCtrl = &(pPortCtrl->rxQueue[rxQueue]);
+
+ /* Check resources */
+ if(pQueueCtrl->resource == 0)
+ {
+ mvOsPrintf("ethPortRx: no more resources\n");
+ return NULL;
+ }
+ while(MV_TRUE)
+ {
+ /* Get the Rx Desc ring 'curr and 'used' indexes */
+ pRxCurrDesc = pQueueCtrl->pCurrentDescr;
+
+ commandStatus = pRxCurrDesc->cmdSts;
+ if (commandStatus & (ETH_BUFFER_OWNED_BY_DMA))
+ {
+ /* Nothing to receive... */
+ ETH_DESCR_INV(pPortCtrl, pRxCurrDesc);
+ return NULL;
+ }
+
+ /* Valid RX only if FIRST and LAST bits are set */
+ if( (commandStatus & (ETH_RX_LAST_DESC_MASK | ETH_RX_FIRST_DESC_MASK)) ==
+ (ETH_RX_LAST_DESC_MASK | ETH_RX_FIRST_DESC_MASK) )
+ {
+ pPktInfo = (MV_PKT_INFO*)pRxCurrDesc->returnInfo;
+ pPktInfo->pFrags->dataSize = pRxCurrDesc->byteCnt - 4;
+ pPktInfo->status = commandStatus;
+ pPktInfo->fragIP = pRxCurrDesc->bufSize & ETH_RX_IP_FRAGMENTED_FRAME_MASK;
+
+ pQueueCtrl->resource--;
+ /* Update 'curr' in data structure */
+ pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxCurrDesc, pQueueCtrl);
+
+#ifdef INCLUDE_SYNC_BARR
+ mvCpuIfSyncBarr(DRAM_TARGET);
+#endif
+ return pPktInfo;
+ }
+ else
+ {
+ ETH_RX_DESC* pRxUsedDesc = pQueueCtrl->pUsedDescr;
+
+#ifdef ETH_DEBUG
+ mvOsPrintf("ethDrv: Unexpected Jumbo frame: "
+ "status=0x%08x, byteCnt=%d, pData=0x%x\n",
+ commandStatus, pRxCurrDesc->byteCnt, pRxCurrDesc->bufPtr);
+#endif /* ETH_DEBUG */
+
+ /* move buffer from pCurrentDescr position to pUsedDescr position */
+ pRxUsedDesc->bufPtr = pRxCurrDesc->bufPtr;
+ pRxUsedDesc->returnInfo = pRxCurrDesc->returnInfo;
+ pRxUsedDesc->bufSize = pRxCurrDesc->bufSize & ETH_RX_BUFFER_MASK;
+
+ /* Return the descriptor to DMA ownership */
+ pRxUsedDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA |
+ ETH_RX_ENABLE_INTERRUPT_MASK;
+
+ /* Flush descriptor and CPU pipe */
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pRxUsedDesc);
+
+ /* Move the used descriptor pointer to the next descriptor */
+ pQueueCtrl->pUsedDescr = RX_NEXT_DESC_PTR(pRxUsedDesc, pQueueCtrl);
+ pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxCurrDesc, pQueueCtrl);
+ }
+ }
+}
+
+/*******************************************************************************
+* mvEthPortRxDone - Returns a Rx buffer back to the Rx ring.
+*
+* DESCRIPTION:
+* This routine returns a Rx buffer back to the Rx ring.
+*
+* INPUT:
+* void* pEthPortHndl - Ethernet Port handler.
+* int rxQueue - Number of Rx queue.
+* MV_PKT_INFO *pPktInfo - Pointer to received packet.
+*
+* RETURN:
+* MV_ERROR - Unexpected Fatal error.
+* MV_OUT_OF_RANGE - RX queue is already FULL, so this buffer can't be
+* returned to this queue.
+* MV_FULL - Buffer returned successfully and RX queue became full.
+* More buffers should not be returned at the time.
+* MV_OK - Buffer returned successfully and there are more free
+* places in the queue.
+*
+*******************************************************************************/
+static INLINE MV_STATUS mvEthPortRxDone(void* pEthPortHndl, int rxQueue, MV_PKT_INFO *pPktInfo)
+{
+ ETH_RX_DESC* pRxUsedDesc;
+ ETH_QUEUE_CTRL* pQueueCtrl;
+ ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+
+ pQueueCtrl = &pPortCtrl->rxQueue[rxQueue];
+
+ /* Get 'used' Rx descriptor */
+ pRxUsedDesc = pQueueCtrl->pUsedDescr;
+
+ /* Check that ring is not FULL */
+ if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) &&
+ (pQueueCtrl->resource != 0) )
+ {
+ mvOsPrintf("%s %d: out of range Error resource=%d, curr=%p, used=%p\n",
+ __FUNCTION__, pPortCtrl->portNo, pQueueCtrl->resource,
+ pQueueCtrl->pCurrentDescr, pQueueCtrl->pUsedDescr);
+ return MV_OUT_OF_RANGE;
+ }
+
+ pRxUsedDesc->bufPtr = pPktInfo->pFrags->bufPhysAddr;
+ pRxUsedDesc->returnInfo = (MV_ULONG)pPktInfo;
+ pRxUsedDesc->bufSize = pPktInfo->pFrags->bufSize & ETH_RX_BUFFER_MASK;
+
+ /* Invalidate data buffer accordingly with pktSize */
+ if(pPktInfo->pktSize != 0)
+ {
+ ETH_PACKET_CACHE_INVALIDATE(pPktInfo->pFrags->bufVirtPtr, pPktInfo->pktSize);
+ pPktInfo->pktSize = 0;
+ }
+
+ /* Return the descriptor to DMA ownership */
+ pRxUsedDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT_MASK;
+
+ /* Flush descriptor and CPU pipe */
+ ETH_DESCR_FLUSH_INV(pPortCtrl, pRxUsedDesc);
+
+ pQueueCtrl->resource++;
+
+ /* Move the used descriptor pointer to the next descriptor */
+ pQueueCtrl->pUsedDescr = RX_NEXT_DESC_PTR(pRxUsedDesc, pQueueCtrl);
+
+ /* If ring became Full return MV_FULL */
+ if(pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr)
+ return MV_FULL;
+
+ return MV_OK;
+}
+
+
+#endif /* __mvEthGbe_h__ */
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvEthRegsh
+#define __INCmvEthRegsh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+/****************************************/
+/* Ethernet Unit Registers */
+/****************************************/
+#define ETH_REG_BASE MV_ETH_REG_BASE
+
+#define ETH_PHY_ADDR_REG(port) (ETH_REG_BASE(port) + 0x000)
+#define ETH_SMI_REG(port) (ETH_REG_BASE(port) + 0x004)
+#define ETH_UNIT_DEF_ADDR_REG(port) (ETH_REG_BASE(port) + 0x008)
+#define ETH_UNIT_DEF_ID_REG(port) (ETH_REG_BASE(port) + 0x00c)
+#define ETH_UNIT_RESERVED(port) (ETH_REG_BASE(port) + 0x014)
+#define ETH_UNIT_INTR_CAUSE_REG(port) (ETH_REG_BASE(port) + 0x080)
+#define ETH_UNIT_INTR_MASK_REG(port) (ETH_REG_BASE(port) + 0x084)
+
+
+#define ETH_UNIT_ERROR_ADDR_REG(port) (ETH_REG_BASE(port) + 0x094)
+#define ETH_UNIT_INT_ADDR_ERROR_REG(port) (ETH_REG_BASE(port) + 0x098)
+#define ETH_UNIT_CONTROL_REG(port) (ETH_REG_BASE(port) + 0x0B0)
+
+#define ETH_PORT_CONFIG_REG(port) (ETH_REG_BASE(port) + 0x400)
+#define ETH_PORT_CONFIG_EXTEND_REG(port) (ETH_REG_BASE(port) + 0x404)
+#define ETH_MII_SERIAL_PARAM_REG(port) (ETH_REG_BASE(port) + 0x408)
+#define ETH_GMII_SERIAL_PARAM_REG(port) (ETH_REG_BASE(port) + 0x40c)
+#define ETH_VLAN_ETHER_TYPE_REG(port) (ETH_REG_BASE(port) + 0x410)
+#define ETH_MAC_ADDR_LOW_REG(port) (ETH_REG_BASE(port) + 0x414)
+#define ETH_MAC_ADDR_HIGH_REG(port) (ETH_REG_BASE(port) + 0x418)
+#define ETH_SDMA_CONFIG_REG(port) (ETH_REG_BASE(port) + 0x41c)
+#define ETH_DIFF_SERV_PRIO_REG(port, code) (ETH_REG_BASE(port) + 0x420 + ((code)<<2))
+#define ETH_PORT_SERIAL_CTRL_REG(port) (ETH_REG_BASE(port) + 0x43c)
+#define ETH_VLAN_TAG_TO_PRIO_REG(port) (ETH_REG_BASE(port) + 0x440)
+#define ETH_PORT_STATUS_REG(port) (ETH_REG_BASE(port) + 0x444)
+
+#define ETH_RX_QUEUE_COMMAND_REG(port) (ETH_REG_BASE(port) + 0x680)
+#define ETH_TX_QUEUE_COMMAND_REG(port) (ETH_REG_BASE(port) + 0x448)
+
+#define ETH_PORT_SERIAL_CTRL_1_REG(port) (ETH_REG_BASE(port) + 0x44c)
+#define ETH_PORT_STATUS_1_REG(port) (ETH_REG_BASE(port) + 0x450)
+#define ETH_PORT_MARVELL_HEADER_REG(port) (ETH_REG_BASE(port) + 0x454)
+#define ETH_PORT_FIFO_PARAMS_REG(port) (ETH_REG_BASE(port) + 0x458)
+#define ETH_MAX_TOKEN_BUCKET_SIZE_REG(port) (ETH_REG_BASE(port) + 0x45c)
+#define ETH_INTR_CAUSE_REG(port) (ETH_REG_BASE(port) + 0x460)
+#define ETH_INTR_CAUSE_EXT_REG(port) (ETH_REG_BASE(port) + 0x464)
+#define ETH_INTR_MASK_REG(port) (ETH_REG_BASE(port) + 0x468)
+#define ETH_INTR_MASK_EXT_REG(port) (ETH_REG_BASE(port) + 0x46c)
+#define ETH_TX_FIFO_URGENT_THRESH_REG(port) (ETH_REG_BASE(port) + 0x474)
+#define ETH_RX_MINIMAL_FRAME_SIZE_REG(port) (ETH_REG_BASE(port) + 0x47c)
+#define ETH_RX_DISCARD_PKTS_CNTR_REG(port) (ETH_REG_BASE(port) + 0x484)
+#define ETH_RX_OVERRUN_PKTS_CNTR_REG(port) (ETH_REG_BASE(port) + 0x488)
+#define ETH_INTERNAL_ADDR_ERROR_REG(port) (ETH_REG_BASE(port) + 0x494)
+#define ETH_TX_FIXED_PRIO_CFG_REG(port) (ETH_REG_BASE(port) + 0x4dc)
+#define ETH_TX_TOKEN_RATE_CFG_REG(port) (ETH_REG_BASE(port) + 0x4e0)
+#define ETH_TX_QUEUE_COMMAND1_REG(port) (ETH_REG_BASE(port) + 0x4e4)
+#define ETH_MAX_TRANSMIT_UNIT_REG(port) (ETH_REG_BASE(port) + 0x4e8)
+#define ETH_TX_TOKEN_BUCKET_SIZE_REG(port) (ETH_REG_BASE(port) + 0x4ec)
+#define ETH_TX_TOKEN_BUCKET_COUNT_REG(port) (ETH_REG_BASE(port) + 0x780)
+#define ETH_RX_DESCR_STAT_CMD_REG(port, q) (ETH_REG_BASE(port) + 0x600 + ((q)<<4))
+#define ETH_RX_BYTE_COUNT_REG(port, q) (ETH_REG_BASE(port) + 0x604 + ((q)<<4))
+#define ETH_RX_BUF_PTR_REG(port, q) (ETH_REG_BASE(port) + 0x608 + ((q)<<4))
+#define ETH_RX_CUR_DESC_PTR_REG(port, q) (ETH_REG_BASE(port) + 0x60c + ((q)<<4))
+#define ETH_TX_CUR_DESC_PTR_REG(port, q) (ETH_REG_BASE(port) + 0x6c0 + ((q)<<2))
+
+#define ETH_TXQ_TOKEN_COUNT_REG(port, q) (ETH_REG_BASE(port) + 0x700 + ((q)<<4))
+#define ETH_TXQ_TOKEN_CFG_REG(port, q) (ETH_REG_BASE(port) + 0x704 + ((q)<<4))
+#define ETH_TXQ_ARBITER_CFG_REG(port, q) (ETH_REG_BASE(port) + 0x708 + ((q)<<4))
+
+#if (MV_ETH_VERSION >= 4)
+#define ETH_TXQ_CMD_1_REG(port) (ETH_REG_BASE(port) + 0x4E4)
+#define ETH_EJP_TX_HI_IPG_REG(port) (ETH_REG_BASE(port) + 0x7A8)
+#define ETH_EJP_TX_LO_IPG_REG(port) (ETH_REG_BASE(port) + 0x7B8)
+#define ETH_EJP_HI_TKN_LO_PKT_REG(port) (ETH_REG_BASE(port) + 0x7C0)
+#define ETH_EJP_HI_TKN_ASYNC_PKT_REG(port) (ETH_REG_BASE(port) + 0x7C4)
+#define ETH_EJP_LO_TKN_ASYNC_PKT_REG(port) (ETH_REG_BASE(port) + 0x7C8)
+#define ETH_EJP_TX_SPEED_REG(port) (ETH_REG_BASE(port) + 0x7D0)
+#endif /* MV_ETH_VERSION >= 4 */
+
+#define ETH_MIB_COUNTERS_BASE(port) (ETH_REG_BASE(port) + 0x1000)
+#define ETH_DA_FILTER_SPEC_MCAST_BASE(port) (ETH_REG_BASE(port) + 0x1400)
+#define ETH_DA_FILTER_OTH_MCAST_BASE(port) (ETH_REG_BASE(port) + 0x1500)
+#define ETH_DA_FILTER_UCAST_BASE(port) (ETH_REG_BASE(port) + 0x1600)
+
+/* Phy address register definitions */
+#define ETH_PHY_ADDR_OFFS 0
+#define ETH_PHY_ADDR_MASK (0x1f <<ETH_PHY_ADDR_OFFS)
+
+/* MIB Counters register definitions */
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW 0x0
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH 0x4
+#define ETH_MIB_BAD_OCTETS_RECEIVED 0x8
+#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR 0xc
+#define ETH_MIB_GOOD_FRAMES_RECEIVED 0x10
+#define ETH_MIB_BAD_FRAMES_RECEIVED 0x14
+#define ETH_MIB_BROADCAST_FRAMES_RECEIVED 0x18
+#define ETH_MIB_MULTICAST_FRAMES_RECEIVED 0x1c
+#define ETH_MIB_FRAMES_64_OCTETS 0x20
+#define ETH_MIB_FRAMES_65_TO_127_OCTETS 0x24
+#define ETH_MIB_FRAMES_128_TO_255_OCTETS 0x28
+#define ETH_MIB_FRAMES_256_TO_511_OCTETS 0x2c
+#define ETH_MIB_FRAMES_512_TO_1023_OCTETS 0x30
+#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS 0x34
+#define ETH_MIB_GOOD_OCTETS_SENT_LOW 0x38
+#define ETH_MIB_GOOD_OCTETS_SENT_HIGH 0x3c
+#define ETH_MIB_GOOD_FRAMES_SENT 0x40
+#define ETH_MIB_EXCESSIVE_COLLISION 0x44
+#define ETH_MIB_MULTICAST_FRAMES_SENT 0x48
+#define ETH_MIB_BROADCAST_FRAMES_SENT 0x4c
+#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED 0x50
+#define ETH_MIB_FC_SENT 0x54
+#define ETH_MIB_GOOD_FC_RECEIVED 0x58
+#define ETH_MIB_BAD_FC_RECEIVED 0x5c
+#define ETH_MIB_UNDERSIZE_RECEIVED 0x60
+#define ETH_MIB_FRAGMENTS_RECEIVED 0x64
+#define ETH_MIB_OVERSIZE_RECEIVED 0x68
+#define ETH_MIB_JABBER_RECEIVED 0x6c
+#define ETH_MIB_MAC_RECEIVE_ERROR 0x70
+#define ETH_MIB_BAD_CRC_EVENT 0x74
+#define ETH_MIB_COLLISION 0x78
+#define ETH_MIB_LATE_COLLISION 0x7c
+
+
+/****************************************/
+/* Ethernet Unit Register BITs */
+/****************************************/
+
+#define ETH_RXQ_ENABLE_OFFSET 0
+#define ETH_RXQ_ENABLE_MASK (0x000000FF << ETH_RXQ_ENABLE_OFFSET)
+
+#define ETH_RXQ_DISABLE_OFFSET 8
+#define ETH_RXQ_DISABLE_MASK (0x000000FF << ETH_RXQ_DISABLE_OFFSET)
+
+/***** BITs of Transmit Queue Command (TQC) register *****/
+#define ETH_TXQ_ENABLE_OFFSET 0
+#define ETH_TXQ_ENABLE_MASK (0x000000FF << ETH_TXQ_ENABLE_OFFSET)
+
+#define ETH_TXQ_DISABLE_OFFSET 8
+#define ETH_TXQ_DISABLE_MASK (0x000000FF << ETH_TXQ_DISABLE_OFFSET)
+
+#if (MV_ETH_VERSION >= 4)
+#define ETH_TX_EJP_RESET_BIT 0
+#define ETH_TX_EJP_RESET_MASK (1 << ETH_TX_EJP_RESET_BIT)
+
+#define ETH_TX_EJP_ENABLE_BIT 2
+#define ETH_TX_EJP_ENABLE_MASK (1 << ETH_TX_EJP_ENABLE_BIT)
+
+#define ETH_TX_LEGACY_WRR_BIT 3
+#define ETH_TX_LEGACY_WRR_MASK (1 << ETH_TX_LEGACY_WRR_BIT)
+#endif /* (MV_ETH_VERSION >= 4) */
+
+/***** BITs of Ethernet Port Status reg (PSR) *****/
+#define ETH_LINK_UP_BIT 1
+#define ETH_LINK_UP_MASK (1<<ETH_LINK_UP_BIT)
+
+#define ETH_FULL_DUPLEX_BIT 2
+#define ETH_FULL_DUPLEX_MASK (1<<ETH_FULL_DUPLEX_BIT)
+
+#define ETH_ENABLE_RCV_FLOW_CTRL_BIT 3
+#define ETH_ENABLE_RCV_FLOW_CTRL_MASK (1<<ETH_ENABLE_RCV_FLOW_CTRL_BIT)
+
+#define ETH_GMII_SPEED_1000_BIT 4
+#define ETH_GMII_SPEED_1000_MASK (1<<ETH_GMII_SPEED_1000_BIT)
+
+#define ETH_MII_SPEED_100_BIT 5
+#define ETH_MII_SPEED_100_MASK (1<<ETH_MII_SPEED_100_BIT)
+
+#define ETH_TX_IN_PROGRESS_BIT 7
+#define ETH_TX_IN_PROGRESS_MASK (1<<ETH_TX_IN_PROGRESS_BIT)
+
+#define ETH_TX_FIFO_EMPTY_BIT 10
+#define ETH_TX_FIFO_EMPTY_MASK (1<<ETH_TX_FIFO_EMPTY_BIT)
+
+/***** BITs of Ethernet Port Status 1 reg (PS1R) *****/
+#define ETH_AUTO_NEG_DONE_BIT 4
+#define ETH_AUTO_NEG_DONE_MASK (1<<ETH_AUTO_NEG_DONE_BIT)
+
+#define ETH_SERDES_PLL_LOCKED_BIT 6
+#define ETH_SERDES_PLL_LOCKED_MASK (1<<ETH_SERDES_PLL_LOCKED_BIT)
+
+/***** BITs of Port Configuration reg (PxCR) *****/
+#define ETH_UNICAST_PROMISCUOUS_MODE_BIT 0
+#define ETH_UNICAST_PROMISCUOUS_MODE_MASK (1<<ETH_UNICAST_PROMISCUOUS_MODE_BIT)
+
+#define ETH_DEF_RX_QUEUE_OFFSET 1
+#define ETH_DEF_RX_QUEUE_ALL_MASK (0x7<<ETH_DEF_RX_QUEUE_OFFSET)
+#define ETH_DEF_RX_QUEUE_MASK(queue) ((queue)<<ETH_DEF_RX_QUEUE_OFFSET)
+
+#define ETH_DEF_RX_ARP_QUEUE_OFFSET 4
+#define ETH_DEF_RX_ARP_QUEUE_ALL_MASK (0x7<<ETH_DEF_RX_ARP_QUEUE_OFFSET)
+#define ETH_DEF_RX_ARP_QUEUE_MASK(queue) ((queue)<<ETH_DEF_RX_ARP_QUEUE_OFFSET)
+
+#define ETH_REJECT_NOT_IP_ARP_BCAST_BIT 7
+#define ETH_REJECT_NOT_IP_ARP_BCAST_MASK (1<<ETH_REJECT_NOT_IP_ARP_BCAST_BIT)
+
+#define ETH_REJECT_IP_BCAST_BIT 8
+#define ETH_REJECT_IP_BCAST_MASK (1<<ETH_REJECT_IP_BCAST_BIT)
+
+#define ETH_REJECT_ARP_BCAST_BIT 9
+#define ETH_REJECT_ARP_BCAST_MASK (1<<ETH_REJECT_ARP_BCAST_BIT)
+
+#define ETH_TX_NO_SET_ERROR_SUMMARY_BIT 12
+#define ETH_TX_NO_SET_ERROR_SUMMARY_MASK (1<<ETH_TX_NO_SET_ERROR_SUMMARY_BIT)
+
+#define ETH_CAPTURE_TCP_FRAMES_ENABLE_BIT 14
+#define ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK (1<<ETH_CAPTURE_TCP_FRAMES_ENABLE_BIT)
+
+#define ETH_CAPTURE_UDP_FRAMES_ENABLE_BIT 15
+#define ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK (1<<ETH_CAPTURE_UDP_FRAMES_ENABLE_BIT)
+
+#define ETH_DEF_RX_TCP_QUEUE_OFFSET 16
+#define ETH_DEF_RX_TCP_QUEUE_ALL_MASK (0x7<<ETH_DEF_RX_TCP_QUEUE_OFFSET)
+#define ETH_DEF_RX_TCP_QUEUE_MASK(queue) ((queue)<<ETH_DEF_RX_TCP_QUEUE_OFFSET)
+
+#define ETH_DEF_RX_UDP_QUEUE_OFFSET 19
+#define ETH_DEF_RX_UDP_QUEUE_ALL_MASK (0x7<<ETH_DEF_RX_UDP_QUEUE_OFFSET)
+#define ETH_DEF_RX_UDP_QUEUE_MASK(queue) ((queue)<<ETH_DEF_RX_UDP_QUEUE_OFFSET)
+
+#define ETH_DEF_RX_BPDU_QUEUE_OFFSET 22
+#define ETH_DEF_RX_BPDU_QUEUE_ALL_MASK (0x7<<ETH_DEF_RX_BPDU_QUEUE_OFFSET)
+#define ETH_DEF_RX_BPDU_QUEUE_MASK(queue) ((queue)<<ETH_DEF_RX_BPDU_QUEUE_OFFSET)
+
+#define ETH_RX_CHECKSUM_MODE_OFFSET 25
+#define ETH_RX_CHECKSUM_NO_PSEUDO_HDR (0<<ETH_RX_CHECKSUM_MODE_OFFSET)
+#define ETH_RX_CHECKSUM_WITH_PSEUDO_HDR (1<<ETH_RX_CHECKSUM_MODE_OFFSET)
+
+/***** BITs of Port Configuration Extend reg (PxCXR) *****/
+#define ETH_CAPTURE_SPAN_BPDU_ENABLE_BIT 1
+#define ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK (1<<ETH_CAPTURE_SPAN_BPDU_ENABLE_BIT)
+
+#define ETH_TX_DISABLE_GEN_CRC_BIT 3
+#define ETH_TX_DISABLE_GEN_CRC_MASK (1<<ETH_TX_DISABLE_GEN_CRC_BIT)
+
+/***** BITs of Tx/Rx queue command reg (RQCR/TQCR) *****/
+#define ETH_QUEUE_ENABLE_OFFSET 0
+#define ETH_QUEUE_ENABLE_ALL_MASK (0xFF<<ETH_QUEUE_ENABLE_OFFSET)
+#define ETH_QUEUE_ENABLE_MASK(queue) (1<<((queue)+ETH_QUEUE_ENABLE_OFFSET))
+
+#define ETH_QUEUE_DISABLE_OFFSET 8
+#define ETH_QUEUE_DISABLE_ALL_MASK (0xFF<<ETH_QUEUE_DISABLE_OFFSET)
+#define ETH_QUEUE_DISABLE_MASK(queue) (1<<((queue)+ETH_QUEUE_DISABLE_OFFSET))
+
+
+/***** BITs of Port Sdma Configuration reg (SDCR) *****/
+#define ETH_RX_FRAME_INTERRUPT_BIT 0
+#define ETH_RX_FRAME_INTERRUPT_MASK (1<<ETH_RX_FRAME_INTERRUPT_BIT)
+
+#define ETH_BURST_SIZE_1_64BIT_VALUE 0
+#define ETH_BURST_SIZE_2_64BIT_VALUE 1
+#define ETH_BURST_SIZE_4_64BIT_VALUE 2
+#define ETH_BURST_SIZE_8_64BIT_VALUE 3
+#define ETH_BURST_SIZE_16_64BIT_VALUE 4
+
+#define ETH_RX_BURST_SIZE_OFFSET 1
+#define ETH_RX_BURST_SIZE_ALL_MASK (0x7<<ETH_RX_BURST_SIZE_OFFSET)
+#define ETH_RX_BURST_SIZE_MASK(burst) ((burst)<<ETH_RX_BURST_SIZE_OFFSET)
+
+#define ETH_RX_NO_DATA_SWAP_BIT 4
+#define ETH_RX_NO_DATA_SWAP_MASK (1<<ETH_RX_NO_DATA_SWAP_BIT)
+#define ETH_RX_DATA_SWAP_MASK (0<<ETH_RX_NO_DATA_SWAP_BIT)
+
+#define ETH_TX_NO_DATA_SWAP_BIT 5
+#define ETH_TX_NO_DATA_SWAP_MASK (1<<ETH_TX_NO_DATA_SWAP_BIT)
+#define ETH_TX_DATA_SWAP_MASK (0<<ETH_TX_NO_DATA_SWAP_BIT)
+
+#define ETH_DESC_SWAP_BIT 6
+#define ETH_DESC_SWAP_MASK (1<<ETH_DESC_SWAP_BIT)
+#define ETH_NO_DESC_SWAP_MASK (0<<ETH_DESC_SWAP_BIT)
+
+#define ETH_RX_INTR_COAL_OFFSET 7
+#define ETH_RX_INTR_COAL_ALL_MASK (0x3fff<<ETH_RX_INTR_COAL_OFFSET)
+#define ETH_RX_INTR_COAL_MASK(value) (((value)<<ETH_RX_INTR_COAL_OFFSET) \
+ & ETH_RX_INTR_COAL_ALL_MASK)
+
+#define ETH_TX_BURST_SIZE_OFFSET 22
+#define ETH_TX_BURST_SIZE_ALL_MASK (0x7<<ETH_TX_BURST_SIZE_OFFSET)
+#define ETH_TX_BURST_SIZE_MASK(burst) ((burst)<<ETH_TX_BURST_SIZE_OFFSET)
+
+#define ETH_RX_INTR_COAL_MSB_BIT 25
+#define ETH_RX_INTR_COAL_MSB_MASK (1<<ETH_RX_INTR_COAL_MSB_BIT)
+
+/* BITs Port #x Tx FIFO Urgent Threshold (PxTFUT) */
+#define ETH_TX_INTR_COAL_OFFSET 4
+#define ETH_TX_INTR_COAL_ALL_MASK (0x3fff << ETH_TX_INTR_COAL_OFFSET)
+#define ETH_TX_INTR_COAL_MASK(value) (((value) << ETH_TX_INTR_COAL_OFFSET) \
+ & ETH_TX_INTR_COAL_ALL_MASK)
+
+/* BITs of Port Serial Control reg (PSCR) */
+#define ETH_PORT_ENABLE_BIT 0
+#define ETH_PORT_ENABLE_MASK (1<<ETH_PORT_ENABLE_BIT)
+
+#define ETH_FORCE_LINK_PASS_BIT 1
+#define ETH_FORCE_LINK_PASS_MASK (1<<ETH_FORCE_LINK_PASS_BIT)
+
+#define ETH_DISABLE_DUPLEX_AUTO_NEG_BIT 2
+#define ETH_DISABLE_DUPLEX_AUTO_NEG_MASK (1<<ETH_DISABLE_DUPLEX_AUTO_NEG_BIT)
+
+#define ETH_DISABLE_FC_AUTO_NEG_BIT 3
+#define ETH_DISABLE_FC_AUTO_NEG_MASK (1<<ETH_DISABLE_FC_AUTO_NEG_BIT)
+
+#define ETH_ADVERTISE_SYM_FC_BIT 4
+#define ETH_ADVERTISE_SYM_FC_MASK (1<<ETH_ADVERTISE_SYM_FC_BIT)
+
+#define ETH_TX_FC_MODE_OFFSET 5
+#define ETH_TX_FC_MODE_MASK (3<<ETH_TX_FC_MODE_OFFSET)
+#define ETH_TX_FC_NO_PAUSE (0<<ETH_TX_FC_MODE_OFFSET)
+#define ETH_TX_FC_SEND_PAUSE (1<<ETH_TX_FC_MODE_OFFSET)
+
+#define ETH_TX_BP_MODE_OFFSET 7
+#define ETH_TX_BP_MODE_MASK (3<<ETH_TX_BP_MODE_OFFSET)
+#define ETH_TX_BP_NO_JAM (0<<ETH_TX_BP_MODE_OFFSET)
+#define ETH_TX_BP_SEND_JAM (1<<ETH_TX_BP_MODE_OFFSET)
+
+#define ETH_DO_NOT_FORCE_LINK_FAIL_BIT 10
+#define ETH_DO_NOT_FORCE_LINK_FAIL_MASK (1<<ETH_DO_NOT_FORCE_LINK_FAIL_BIT)
+
+#define ETH_RETRANSMIT_FOREVER_BIT 11
+#define ETH_RETRANSMIT_FOREVER_MASK (1<<ETH_RETRANSMIT_FOREVER_BIT)
+
+#define ETH_DISABLE_SPEED_AUTO_NEG_BIT 13
+#define ETH_DISABLE_SPEED_AUTO_NEG_MASK (1<<ETH_DISABLE_SPEED_AUTO_NEG_BIT)
+
+#define ETH_DTE_ADVERT_BIT 14
+#define ETH_DTE_ADVERT_MASK (1<<ETH_DTE_ADVERT_BIT)
+
+#define ETH_MII_PHY_MODE_BIT 15
+#define ETH_MII_PHY_MODE_MAC (0<<ETH_MII_PHY_MODE_BIT)
+#define ETH_MII_PHY_MODE_PHY (1<<ETH_MII_PHY_MODE_BIT)
+
+#define ETH_MII_SOURCE_SYNCH_BIT 16
+#define ETH_MII_STANDARD_SYNCH (0<<ETH_MII_SOURCE_SYNCH_BIT)
+#define ETH_MII_400Mbps_SYNCH (1<<ETH_MII_SOURCE_CLK_BIT)
+
+#define ETH_MAX_RX_PACKET_SIZE_OFFSET 17
+#define ETH_MAX_RX_PACKET_SIZE_MASK (7<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_1518BYTE (0<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_1522BYTE (1<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_1552BYTE (2<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_9022BYTE (3<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_9192BYTE (4<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_9700BYTE (5<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+
+#define ETH_SET_FULL_DUPLEX_BIT 21
+#define ETH_SET_FULL_DUPLEX_MASK (1<<ETH_SET_FULL_DUPLEX_BIT)
+
+#define ETH_SET_FLOW_CTRL_BIT 22
+#define ETH_SET_FLOW_CTRL_MASK (1<<ETH_SET_FLOW_CTRL_BIT)
+
+#define ETH_SET_GMII_SPEED_1000_BIT 23
+#define ETH_SET_GMII_SPEED_1000_MASK (1<<ETH_SET_GMII_SPEED_1000_BIT)
+
+#define ETH_SET_MII_SPEED_100_BIT 24
+#define ETH_SET_MII_SPEED_100_MASK (1<<ETH_SET_MII_SPEED_100_BIT)
+
+/* BITs of Port Serial Control 1 reg (PSC1R) */
+#define ETH_PSC_ENABLE_BIT 2
+#define ETH_PSC_ENABLE_MASK (1<<ETH_PSC_ENABLE_BIT)
+
+#define ETH_RGMII_ENABLE_BIT 3
+#define ETH_RGMII_ENABLE_MASK (1<<ETH_RGMII_ENABLE_BIT)
+
+#define ETH_PORT_RESET_BIT 4
+#define ETH_PORT_RESET_MASK (1<<ETH_PORT_RESET_BIT)
+
+#define ETH_INBAND_AUTO_NEG_ENABLE_BIT 6
+#define ETH_INBAND_AUTO_NEG_ENABLE_MASK (1<<ETH_INBAND_AUTO_NEG_ENABLE_BIT)
+
+#define ETH_INBAND_AUTO_NEG_BYPASS_BIT 7
+#define ETH_INBAND_AUTO_NEG_BYPASS_MASK (1<<ETH_INBAND_AUTO_NEG_BYPASS_BIT)
+
+#define ETH_INBAND_AUTO_NEG_START_BIT 8
+#define ETH_INBAND_AUTO_NEG_START_MASK (1<<ETH_INBAND_AUTO_NEG_START_BIT)
+
+#define ETH_PORT_TYPE_BIT 11
+#define ETH_PORT_TYPE_1000BasedX_MASK (1<<ETH_PORT_TYPE_BIT)
+
+#define ETH_SGMII_MODE_BIT 12
+#define ETH_1000BaseX_MODE_MASK (0<<ETH_SGMII_MODE_BIT)
+#define ETH_SGMII_MODE_MASK (1<<ETH_SGMII_MODE_BIT)
+
+#define ETH_MGMII_MODE_BIT 13
+
+#define ETH_EN_MII_ODD_PRE_BIT 22
+#define ETH_EN_MII_ODD_PRE_MASK (1<<ETH_EN_MII_ODD_PRE_BIT)
+
+/* BITs of SDMA Descriptor Command/Status field */
+#if defined(MV_CPU_BE)
+typedef struct _ethRxDesc
+{
+ MV_U16 byteCnt ; /* Descriptor buffer byte count */
+ MV_U16 bufSize ; /* Buffer size */
+ MV_U32 cmdSts ; /* Descriptor command status */
+ MV_U32 nextDescPtr; /* Next descriptor pointer */
+ MV_U32 bufPtr ; /* Descriptor buffer pointer */
+ MV_ULONG returnInfo ; /* User resource return information */
+} ETH_RX_DESC;
+
+typedef struct _ethTxDesc
+{
+ MV_U16 byteCnt ; /* Descriptor buffer byte count */
+ MV_U16 L4iChk ; /* CPU provided TCP Checksum */
+ MV_U32 cmdSts ; /* Descriptor command status */
+ MV_U32 nextDescPtr; /* Next descriptor pointer */
+ MV_U32 bufPtr ; /* Descriptor buffer pointer */
+ MV_ULONG returnInfo ; /* User resource return information */
+ MV_U8* alignBufPtr; /* Pointer to 8 byte aligned buffer */
+} ETH_TX_DESC;
+
+#elif defined(MV_CPU_LE)
+
+typedef struct _ethRxDesc
+{
+ MV_U32 cmdSts ; /* Descriptor command status */
+ MV_U16 bufSize ; /* Buffer size */
+ MV_U16 byteCnt ; /* Descriptor buffer byte count */
+ MV_U32 bufPtr ; /* Descriptor buffer pointer */
+ MV_U32 nextDescPtr; /* Next descriptor pointer */
+ MV_ULONG returnInfo ; /* User resource return information */
+} ETH_RX_DESC;
+
+typedef struct _ethTxDesc
+{
+ MV_U32 cmdSts ; /* Descriptor command status */
+ MV_U16 L4iChk ; /* CPU provided TCP Checksum */
+ MV_U16 byteCnt ; /* Descriptor buffer byte count */
+ MV_U32 bufPtr ; /* Descriptor buffer pointer */
+ MV_U32 nextDescPtr; /* Next descriptor pointer */
+ MV_ULONG returnInfo ; /* User resource return information */
+ MV_U8* alignBufPtr; /* Pointer to 32 byte aligned buffer */
+} ETH_TX_DESC;
+
+#else
+#error "MV_CPU_BE or MV_CPU_LE must be defined"
+#endif /* MV_CPU_BE || MV_CPU_LE */
+
+/* Buffer offset from buffer pointer */
+#define ETH_RX_BUF_OFFSET 0x2
+
+
+/* Tx & Rx descriptor bits */
+#define ETH_ERROR_SUMMARY_BIT 0
+#define ETH_ERROR_SUMMARY_MASK (1<<ETH_ERROR_SUMMARY_BIT)
+
+#define ETH_BUFFER_OWNER_BIT 31
+#define ETH_BUFFER_OWNED_BY_DMA (1<<ETH_BUFFER_OWNER_BIT)
+#define ETH_BUFFER_OWNED_BY_HOST (0<<ETH_BUFFER_OWNER_BIT)
+
+/* Tx descriptor bits */
+#define ETH_TX_ERROR_CODE_OFFSET 1
+#define ETH_TX_ERROR_CODE_MASK (3<<ETH_TX_ERROR_CODE_OFFSET)
+#define ETH_TX_LATE_COLLISION_ERROR (0<<ETH_TX_ERROR_CODE_OFFSET)
+#define ETH_TX_UNDERRUN_ERROR (1<<ETH_TX_ERROR_CODE_OFFSET)
+#define ETH_TX_EXCESSIVE_COLLISION_ERROR (2<<ETH_TX_ERROR_CODE_OFFSET)
+
+#define ETH_TX_LLC_SNAP_FORMAT_BIT 9
+#define ETH_TX_LLC_SNAP_FORMAT_MASK (1<<ETH_TX_LLC_SNAP_FORMAT_BIT)
+
+#define ETH_TX_IP_FRAG_BIT 10
+#define ETH_TX_IP_FRAG_MASK (1<<ETH_TX_IP_FRAG_BIT)
+#define ETH_TX_IP_FRAG (0<<ETH_TX_IP_FRAG_BIT)
+#define ETH_TX_IP_NO_FRAG (1<<ETH_TX_IP_FRAG_BIT)
+
+#define ETH_TX_IP_HEADER_LEN_OFFSET 11
+#define ETH_TX_IP_HEADER_LEN_ALL_MASK (0xF<<ETH_TX_IP_HEADER_LEN_OFFSET)
+#define ETH_TX_IP_HEADER_LEN_MASK(len) ((len)<<ETH_TX_IP_HEADER_LEN_OFFSET)
+
+#define ETH_TX_VLAN_TAGGED_FRAME_BIT 15
+#define ETH_TX_VLAN_TAGGED_FRAME_MASK (1<<ETH_TX_VLAN_TAGGED_FRAME_BIT)
+
+#define ETH_TX_L4_TYPE_BIT 16
+#define ETH_TX_L4_TCP_TYPE (0<<ETH_TX_L4_TYPE_BIT)
+#define ETH_TX_L4_UDP_TYPE (1<<ETH_TX_L4_TYPE_BIT)
+
+#define ETH_TX_GENERATE_L4_CHKSUM_BIT 17
+#define ETH_TX_GENERATE_L4_CHKSUM_MASK (1<<ETH_TX_GENERATE_L4_CHKSUM_BIT)
+
+#define ETH_TX_GENERATE_IP_CHKSUM_BIT 18
+#define ETH_TX_GENERATE_IP_CHKSUM_MASK (1<<ETH_TX_GENERATE_IP_CHKSUM_BIT)
+
+#define ETH_TX_ZERO_PADDING_BIT 19
+#define ETH_TX_ZERO_PADDING_MASK (1<<ETH_TX_ZERO_PADDING_BIT)
+
+#define ETH_TX_LAST_DESC_BIT 20
+#define ETH_TX_LAST_DESC_MASK (1<<ETH_TX_LAST_DESC_BIT)
+
+#define ETH_TX_FIRST_DESC_BIT 21
+#define ETH_TX_FIRST_DESC_MASK (1<<ETH_TX_FIRST_DESC_BIT)
+
+#define ETH_TX_GENERATE_CRC_BIT 22
+#define ETH_TX_GENERATE_CRC_MASK (1<<ETH_TX_GENERATE_CRC_BIT)
+
+#define ETH_TX_ENABLE_INTERRUPT_BIT 23
+#define ETH_TX_ENABLE_INTERRUPT_MASK (1<<ETH_TX_ENABLE_INTERRUPT_BIT)
+
+#define ETH_TX_AUTO_MODE_BIT 30
+#define ETH_TX_AUTO_MODE_MASK (1<<ETH_TX_AUTO_MODE_BIT)
+
+
+/* Rx descriptor bits */
+#define ETH_RX_ERROR_CODE_OFFSET 1
+#define ETH_RX_ERROR_CODE_MASK (3<<ETH_RX_ERROR_CODE_OFFSET)
+#define ETH_RX_CRC_ERROR (0<<ETH_RX_ERROR_CODE_OFFSET)
+#define ETH_RX_OVERRUN_ERROR (1<<ETH_RX_ERROR_CODE_OFFSET)
+#define ETH_RX_MAX_FRAME_LEN_ERROR (2<<ETH_RX_ERROR_CODE_OFFSET)
+#define ETH_RX_RESOURCE_ERROR (3<<ETH_RX_ERROR_CODE_OFFSET)
+
+#define ETH_RX_L4_CHECKSUM_OFFSET 3
+#define ETH_RX_L4_CHECKSUM_MASK (0xffff<<ETH_RX_L4_CHECKSUM_OFFSET)
+
+#define ETH_RX_VLAN_TAGGED_FRAME_BIT 19
+#define ETH_RX_VLAN_TAGGED_FRAME_MASK (1<<ETH_RX_VLAN_TAGGED_FRAME_BIT)
+
+#define ETH_RX_BPDU_FRAME_BIT 20
+#define ETH_RX_BPDU_FRAME_MASK (1<<ETH_RX_BPDU_FRAME_BIT)
+
+#define ETH_RX_L4_TYPE_OFFSET 21
+#define ETH_RX_L4_TYPE_MASK (3<<ETH_RX_L4_TYPE_OFFSET)
+#define ETH_RX_L4_TCP_TYPE (0<<ETH_RX_L4_TYPE_OFFSET)
+#define ETH_RX_L4_UDP_TYPE (1<<ETH_RX_L4_TYPE_OFFSET)
+#define ETH_RX_L4_OTHER_TYPE (2<<ETH_RX_L4_TYPE_OFFSET)
+
+#define ETH_RX_NOT_LLC_SNAP_FORMAT_BIT 23
+#define ETH_RX_NOT_LLC_SNAP_FORMAT_MASK (1<<ETH_RX_NOT_LLC_SNAP_FORMAT_BIT)
+
+#define ETH_RX_IP_FRAME_TYPE_BIT 24
+#define ETH_RX_IP_FRAME_TYPE_MASK (1<<ETH_RX_IP_FRAME_TYPE_BIT)
+
+#define ETH_RX_IP_HEADER_OK_BIT 25
+#define ETH_RX_IP_HEADER_OK_MASK (1<<ETH_RX_IP_HEADER_OK_BIT)
+
+#define ETH_RX_LAST_DESC_BIT 26
+#define ETH_RX_LAST_DESC_MASK (1<<ETH_RX_LAST_DESC_BIT)
+
+#define ETH_RX_FIRST_DESC_BIT 27
+#define ETH_RX_FIRST_DESC_MASK (1<<ETH_RX_FIRST_DESC_BIT)
+
+#define ETH_RX_UNKNOWN_DA_BIT 28
+#define ETH_RX_UNKNOWN_DA_MASK (1<<ETH_RX_UNKNOWN_DA_BIT)
+
+#define ETH_RX_ENABLE_INTERRUPT_BIT 29
+#define ETH_RX_ENABLE_INTERRUPT_MASK (1<<ETH_RX_ENABLE_INTERRUPT_BIT)
+
+#define ETH_RX_L4_CHECKSUM_OK_BIT 30
+#define ETH_RX_L4_CHECKSUM_OK_MASK (1<<ETH_RX_L4_CHECKSUM_OK_BIT)
+
+/* Rx descriptor bufSize field */
+#define ETH_RX_IP_FRAGMENTED_FRAME_BIT 2
+#define ETH_RX_IP_FRAGMENTED_FRAME_MASK (1<<ETH_RX_IP_FRAGMENTED_FRAME_BIT)
+
+#define ETH_RX_BUFFER_MASK 0xFFF8
+
+
+/* Ethernet Cause Register BITs */
+#define ETH_CAUSE_RX_READY_SUM_BIT 0
+#define ETH_CAUSE_EXTEND_BIT 1
+
+#define ETH_CAUSE_RX_READY_OFFSET 2
+#define ETH_CAUSE_RX_READY_BIT(queue) (ETH_CAUSE_RX_READY_OFFSET + (queue))
+#define ETH_CAUSE_RX_READY_MASK(queue) (1 << (ETH_CAUSE_RX_READY_BIT(queue)))
+
+#define ETH_CAUSE_RX_ERROR_SUM_BIT 10
+#define ETH_CAUSE_RX_ERROR_OFFSET 11
+#define ETH_CAUSE_RX_ERROR_BIT(queue) (ETH_CAUSE_RX_ERROR_OFFSET + (queue))
+#define ETH_CAUSE_RX_ERROR_MASK(queue) (1 << (ETH_CAUSE_RX_ERROR_BIT(queue)))
+
+#define ETH_CAUSE_TX_END_BIT 19
+#define ETH_CAUSE_SUM_BIT 31
+
+/* Ethernet Cause Extended Register BITs */
+#define ETH_CAUSE_TX_BUF_OFFSET 0
+#define ETH_CAUSE_TX_BUF_BIT(queue) (ETH_CAUSE_TX_BUF_OFFSET + (queue))
+#define ETH_CAUSE_TX_BUF_MASK(queue) (1 << (ETH_CAUSE_TX_BUF_BIT(queue)))
+
+#define ETH_CAUSE_TX_ERROR_OFFSET 8
+#define ETH_CAUSE_TX_ERROR_BIT(queue) (ETH_CAUSE_TX_ERROR_OFFSET + (queue))
+#define ETH_CAUSE_TX_ERROR_MASK(queue) (1 << (ETH_CAUSE_TX_ERROR_BIT(queue)))
+
+#define ETH_CAUSE_PHY_STATUS_CHANGE_BIT 16
+#define ETH_CAUSE_RX_OVERRUN_BIT 18
+#define ETH_CAUSE_TX_UNDERRUN_BIT 19
+#define ETH_CAUSE_LINK_STATE_CHANGE_BIT 20
+#define ETH_CAUSE_INTERNAL_ADDR_ERR_BIT 23
+#define ETH_CAUSE_EXTEND_SUM_BIT 31
+
+/* Marvell Header Register */
+/* Marvell Header register bits */
+#define ETH_MVHDR_EN_BIT 0
+#define ETH_MVHDR_EN_MASK (1 << ETH_MVHDR_EN_BIT)
+
+#define ETH_MVHDR_DAPREFIX_BIT 1
+#define ETH_MVHDR_DAPREFIX_MASK (0x3 << ETH_MVHDR_DAPREFIX_BIT)
+#define ETH_MVHDR_DAPREFIX_PRI_1_2 (0x1 << ETH_MVHDR_DAPREFIX_BIT)
+#define ETH_MVHDR_DAPREFIX_DBNUM_PRI (0x2 << ETH_MVHDR_DAPREFIX_BIT)
+#define ETH_MVHDR_DAPREFIX_SPID_PRI (0x3 << ETH_MVHDR_DAPREFIX_BIT)
+
+#define ETH_MVHDR_MHMASK_BIT 8
+#define ETH_MVHDR_MHMASK_MASK (0x3 << ETH_MVHDR_MHMASK_BIT)
+#define ETH_MVHDR_MHMASK_8_QUEUE (0x0 << ETH_MVHDR_MHMASK_BIT)
+#define ETH_MVHDR_MHMASK_4_QUEUE (0x1 << ETH_MVHDR_MHMASK_BIT)
+#define ETH_MVHDR_MHMASK_2_QUEUE (0x3 << ETH_MVHDR_MHMASK_BIT)
+
+
+/* Relevant for 6183 ONLY */
+#define ETH_UNIT_PORTS_PADS_CALIB_0_REG (MV_ETH_REG_BASE(0) + 0x0A0)
+#define ETH_UNIT_PORTS_PADS_CALIB_1_REG (MV_ETH_REG_BASE(0) + 0x0A4)
+#define ETH_UNIT_PORTS_PADS_CALIB_2_REG (MV_ETH_REG_BASE(0) + 0x0A8)
+/* Ethernet Unit Ports Pads Calibration_REG (ETH_UNIT_PORTS_PADS_CALIB_x_REG) */
+#define ETH_ETHERNET_PAD_CLIB_DRVN_OFFS 0
+#define ETH_ETHERNET_PAD_CLIB_DRVN_MASK (0x1F << ETH_ETHERNET_PAD_CLIB_DRVN_OFFS)
+
+#define ETH_ETHERNET_PAD_CLIB_DRVP_OFFS 5
+#define ETH_ETHERNET_PAD_CLIB_DRVP_MASK (0x1F << ETH_ETHERNET_PAD_CLIB_DRVP_OFFS)
+
+#define ETH_ETHERNET_PAD_CLIB_TUNEEN_OFFS 16
+#define ETH_ETHERNET_PAD_CLIB_TUNEEN_MASK (0x1 << ETH_ETHERNET_PAD_CLIB_TUNEEN_OFFS)
+
+#define ETH_ETHERNET_PAD_CLIB_LOCKN_OFFS 17
+#define ETH_ETHERNET_PAD_CLIB_LOCKN_MASK (0x1F << ETH_ETHERNET_PAD_CLIB_LOCKN_OFFS)
+
+#define ETH_ETHERNET_PAD_CLIB_OFFST_OFFS 24
+#define ETH_ETHERNET_PAD_CLIB_OFFST_MASK (0x1F << ETH_ETHERNET_PAD_CLIB_OFFST_OFFS)
+
+#define ETH_ETHERNET_PAD_CLIB_WR_EN_OFFS 31
+#define ETH_ETHERNET_PAD_CLIB_WR_EN_MASK (0x1 << ETH_ETHERNET_PAD_CLIB_WR_EN_OFFS)
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvEthRegsh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvEth.h - Header File for : Ethernet Controller
+*
+* DESCRIPTION:
+* This header file contains macros typedefs and function declaration for
+* Marvell Gigabit Ethernet Controllers.
+*
+* DEPENDENCIES:
+* None.
+*
+*******************************************************************************/
+
+#ifndef __mvEth_h__
+#define __mvEth_h__
+
+/* includes */
+#include "mvTypes.h"
+#include "mv802_3.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+#include "eth/gbe/mvEthRegs.h"
+#include "mvSysHwConfig.h"
+
+/* defines */
+
+#define MV_ETH_EXTRA_FRAGS_NUM 2
+
+
+typedef enum
+{
+ MV_ETH_SPEED_AN,
+ MV_ETH_SPEED_10,
+ MV_ETH_SPEED_100,
+ MV_ETH_SPEED_1000
+
+} MV_ETH_PORT_SPEED;
+
+typedef enum
+{
+ MV_ETH_DUPLEX_AN,
+ MV_ETH_DUPLEX_HALF,
+ MV_ETH_DUPLEX_FULL
+
+} MV_ETH_PORT_DUPLEX;
+
+typedef enum
+{
+ MV_ETH_FC_AN_ADV_DIS,
+ MV_ETH_FC_AN_ADV_SYM,
+ MV_ETH_FC_DISABLE,
+ MV_ETH_FC_ENABLE
+
+} MV_ETH_PORT_FC;
+
+typedef enum
+{
+ MV_ETH_PRIO_FIXED = 0, /* Fixed priority mode */
+ MV_ETH_PRIO_WRR = 1 /* Weighted round robin priority mode */
+} MV_ETH_PRIO_MODE;
+
+/* Ethernet port specific infomation */
+typedef struct
+{
+ int maxRxPktSize;
+ int rxDefQ;
+ int rxBpduQ;
+ int rxArpQ;
+ int rxTcpQ;
+ int rxUdpQ;
+ int ejpMode;
+} MV_ETH_PORT_CFG;
+
+typedef struct
+{
+ int descrNum;
+} MV_ETH_RX_Q_CFG;
+
+typedef struct
+{
+ int descrNum;
+ MV_ETH_PRIO_MODE prioMode;
+ int quota;
+} MV_ETH_TX_Q_CFG;
+
+typedef struct
+{
+ int maxRxPktSize;
+ int rxDefQ;
+ int txDescrNum[MV_ETH_TX_Q_NUM];
+ int rxDescrNum[MV_ETH_RX_Q_NUM];
+ void *osHandle;
+} MV_ETH_PORT_INIT;
+
+typedef struct
+{
+ MV_BOOL isLinkUp;
+ MV_ETH_PORT_SPEED speed;
+ MV_ETH_PORT_DUPLEX duplex;
+ MV_ETH_PORT_FC flowControl;
+
+} MV_ETH_PORT_STATUS;
+
+typedef enum
+{
+ MV_ETH_DISABLE_HEADER_MODE = 0,
+ MV_ETH_ENABLE_HEADER_MODE_PRI_2_1 = 1,
+ MV_ETH_ENABLE_HEADER_MODE_PRI_DBNUM = 2,
+ MV_ETH_ENABLE_HEADER_MODE_PRI_SPID = 3
+} MV_ETH_HEADER_MODE;
+
+
+/* ethernet.h API list */
+void mvEthHalInit(void);
+void mvEthMemAttrGet(MV_BOOL* pIsSram, MV_BOOL* pIsSwCoher);
+
+/* Port Initalization routines */
+void* mvEthPortInit (int port, MV_ETH_PORT_INIT *pPortInit);
+void ethResetTxDescRing(void* pPortHndl, int queue);
+void ethResetRxDescRing(void* pPortHndl, int queue);
+
+void* mvEthPortHndlGet(int port);
+
+void mvEthPortFinish(void* pEthPortHndl);
+MV_STATUS mvEthPortDown(void* pEthPortHndl);
+MV_STATUS mvEthPortDisable(void* pEthPortHndl);
+MV_STATUS mvEthPortUp(void* pEthPortHndl);
+MV_STATUS mvEthPortEnable(void* pEthPortHndl);
+
+/* Port data flow routines */
+MV_PKT_INFO *mvEthPortForceTxDone(void* pEthPortHndl, int txQueue);
+MV_PKT_INFO *mvEthPortForceRx(void* pEthPortHndl, int rxQueue);
+
+/* Port Configuration routines */
+MV_STATUS mvEthDefaultsSet(void* pEthPortHndl);
+MV_STATUS mvEthMaxRxSizeSet(void* pPortHndl, int maxRxSize);
+
+/* Port RX MAC Filtering control routines */
+MV_U8 mvEthMcastCrc8Get(MV_U8* pAddr);
+MV_STATUS mvEthRxFilterModeSet(void* pPortHndl, MV_BOOL isPromisc);
+MV_STATUS mvEthMacAddrSet(void* pPortHandle, MV_U8* pMacAddr, int queue);
+MV_STATUS mvEthMcastAddrSet(void* pPortHandle, MV_U8 *pAddr, int queue);
+
+/* MIB Counters APIs */
+MV_U32 mvEthMibCounterRead(void* pPortHndl, unsigned int mibOffset,
+ MV_U32* pHigh32);
+void mvEthMibCountersClear(void* pPortHandle);
+
+/* TX Scheduling configuration routines */
+MV_STATUS mvEthTxQueueConfig(void* pPortHandle, int txQueue,
+ MV_ETH_PRIO_MODE txPrioMode, int txQuota);
+
+/* RX Dispatching configuration routines */
+MV_STATUS mvEthBpduRxQueue(void* pPortHandle, int bpduQueue);
+MV_STATUS mvEthVlanPrioRxQueue(void* pPortHandle, int vlanPrio, int vlanPrioQueue);
+MV_STATUS mvEthTosToRxqSet(void* pPortHandle, int tos, int rxq);
+int mvEthTosToRxqGet(void* pPortHandle, int tos);
+
+/* Speed, Duplex, FlowControl routines */
+MV_STATUS mvEthSpeedDuplexSet(void* pPortHandle, MV_ETH_PORT_SPEED speed,
+ MV_ETH_PORT_DUPLEX duplex);
+
+MV_STATUS mvEthFlowCtrlSet(void* pPortHandle, MV_ETH_PORT_FC flowControl);
+
+#if (MV_ETH_VERSION >= 4)
+MV_STATUS mvEthEjpModeSet(void* pPortHandle, int mode);
+#endif /* (MV_ETH_VERSION >= 4) */
+
+void mvEthStatusGet(void* pPortHandle, MV_ETH_PORT_STATUS* pStatus);
+
+/* Marvell Header control */
+MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode);
+
+/* PHY routines */
+void mvEthPhyAddrSet(void* pPortHandle, int phyAddr);
+int mvEthPhyAddrGet(void* pPortHandle);
+
+/* Power management routines */
+void mvEthPortPowerDown(int port);
+void mvEthPortPowerUp(int port);
+
+/******************** ETH PRIVATE ************************/
+
+/*#define UNCACHED_TX_BUFFERS*/
+/*#define UNCACHED_RX_BUFFERS*/
+
+
+/* Port attributes */
+/* Size of a Tx/Rx descriptor used in chain list data structure */
+#define ETH_RX_DESC_ALIGNED_SIZE 32
+#define ETH_TX_DESC_ALIGNED_SIZE 32
+
+#define TX_DISABLE_TIMEOUT_MSEC 1000
+#define RX_DISABLE_TIMEOUT_MSEC 1000
+#define TX_FIFO_EMPTY_TIMEOUT_MSEC 10000
+#define PORT_DISABLE_WAIT_TCLOCKS 5000
+
+/* Macros that save access to desc in order to find next desc pointer */
+#define RX_NEXT_DESC_PTR(pRxDescr, pQueueCtrl) \
+ ((pRxDescr) == (pQueueCtrl)->pLastDescr) ? \
+ (ETH_RX_DESC*)((pQueueCtrl)->pFirstDescr) : \
+ (ETH_RX_DESC*)(((MV_ULONG)(pRxDescr)) + ETH_RX_DESC_ALIGNED_SIZE)
+
+#define TX_NEXT_DESC_PTR(pTxDescr, pQueueCtrl) \
+ ((pTxDescr) == (pQueueCtrl)->pLastDescr) ? \
+ (ETH_TX_DESC*)((pQueueCtrl)->pFirstDescr) : \
+ (ETH_TX_DESC*)(((MV_ULONG)(pTxDescr)) + ETH_TX_DESC_ALIGNED_SIZE)
+
+#define RX_PREV_DESC_PTR(pRxDescr, pQueueCtrl) \
+ ((pRxDescr) == (pQueueCtrl)->pFirstDescr) ? \
+ (ETH_RX_DESC*)((pQueueCtrl)->pLastDescr) : \
+ (ETH_RX_DESC*)(((MV_ULONG)(pRxDescr)) - ETH_RX_DESC_ALIGNED_SIZE)
+
+#define TX_PREV_DESC_PTR(pTxDescr, pQueueCtrl) \
+ ((pTxDescr) == (pQueueCtrl)->pFirstDescr) ? \
+ (ETH_TX_DESC*)((pQueueCtrl)->pLastDescr) : \
+ (ETH_TX_DESC*)(((MV_ULONG)(pTxDescr)) - ETH_TX_DESC_ALIGNED_SIZE)
+
+
+/* Queue specific information */
+typedef struct
+{
+ void* pFirstDescr;
+ void* pLastDescr;
+ void* pCurrentDescr;
+ void* pUsedDescr;
+ int resource;
+ MV_BUF_INFO descBuf;
+} ETH_QUEUE_CTRL;
+
+
+/* Ethernet port specific infomation */
+typedef struct _ethPortCtrl
+{
+ int portNo;
+ ETH_QUEUE_CTRL rxQueue[MV_ETH_RX_Q_NUM]; /* Rx ring resource */
+ ETH_QUEUE_CTRL txQueue[MV_ETH_TX_Q_NUM]; /* Tx ring resource */
+
+ MV_ETH_PORT_CFG portConfig;
+ MV_ETH_RX_Q_CFG rxQueueConfig[MV_ETH_RX_Q_NUM];
+ MV_ETH_TX_Q_CFG txQueueConfig[MV_ETH_TX_Q_NUM];
+
+ /* Register images - For DP */
+ MV_U32 portTxQueueCmdReg; /* Port active Tx queues summary */
+ MV_U32 portRxQueueCmdReg; /* Port active Rx queues summary */
+
+ MV_STATE portState;
+
+ MV_U8 mcastCount[256];
+ MV_U32* hashPtr;
+ void *osHandle;
+} ETH_PORT_CTRL;
+
+/************** MACROs ****************/
+
+/* MACROs to Flush / Invalidate TX / RX Buffers */
+#if (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) && !defined(UNCACHED_TX_BUFFERS)
+# define ETH_PACKET_CACHE_FLUSH(pAddr, size) \
+ mvOsCacheClear(NULL, (pAddr), (size)); \
+ /*CPU_PIPE_FLUSH;*/
+#else
+# define ETH_PACKET_CACHE_FLUSH(pAddr, size) \
+ mvOsIoVirtToPhy(NULL, (pAddr));
+#endif /* ETHER_DRAM_COHER == MV_CACHE_COHER_SW */
+
+#if ( (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) && !defined(UNCACHED_RX_BUFFERS) )
+# define ETH_PACKET_CACHE_INVALIDATE(pAddr, size) \
+ mvOsCacheInvalidate (NULL, (pAddr), (size)); \
+ /*CPU_PIPE_FLUSH;*/
+#else
+# define ETH_PACKET_CACHE_INVALIDATE(pAddr, size)
+#endif /* ETHER_DRAM_COHER == MV_CACHE_COHER_SW && !UNCACHED_RX_BUFFERS */
+
+#ifdef ETH_DESCR_UNCACHED
+
+#define ETH_DESCR_FLUSH_INV(pPortCtrl, pDescr)
+#define ETH_DESCR_INV(pPortCtrl, pDescr)
+
+#else
+
+#define ETH_DESCR_FLUSH_INV(pPortCtrl, pDescr) \
+ mvOsCacheLineFlushInv(pPortCtrl->osHandle, (MV_ULONG)(pDescr))
+
+#define ETH_DESCR_INV(pPortCtrl, pDescr) \
+ mvOsCacheLineInv(pPortCtrl->osHandle, (MV_ULONG)(pDescr))
+
+#endif /* ETH_DESCR_UNCACHED */
+
+#include "eth/gbe/mvEthGbe.h"
+
+#endif /* __mvEth_h__ */
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "gpp/mvGpp.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+static MV_VOID gppRegSet(MV_U32 group, MV_U32 regOffs,MV_U32 mask,MV_U32 value);
+
+/*******************************************************************************
+* mvGppTypeSet - Enable a GPP (OUT) pin
+*
+* DESCRIPTION:
+*
+* INPUT:
+* group - GPP group number
+* mask - 32bit mask value. Each set bit in the mask means that the type
+* of corresponding GPP will be set. Other GPPs are ignored.
+* value - 32bit value that describes GPP type per pin.
+*
+* OUTPUT:
+* None.
+*
+* EXAMPLE:
+* Set GPP8 to input and GPP15 to output.
+* mvGppTypeSet(0, (GPP8 | GPP15),
+* ((MV_GPP_IN & GPP8) | (MV_GPP_OUT & GPP15)) );
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvGppTypeSet(MV_U32 group, MV_U32 mask, MV_U32 value)
+{
+ if (group >= MV_GPP_MAX_GROUP)
+ {
+ DB(mvOsPrintf("mvGppTypeSet: ERR. invalid group number \n"));
+ return MV_BAD_PARAM;
+ }
+
+ gppRegSet(group, GPP_DATA_OUT_EN_REG(group), mask, value);
+
+ /* Workaround for Erratum FE-MISC-70*/
+ if(mvCtrlRevGet()==MV_88F6XXX_A0_REV && (group == 1))
+ {
+ mask &= 0x2;
+ gppRegSet(0, GPP_DATA_OUT_EN_REG(0), mask, value);
+ } /*End of WA*/
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvGppBlinkEn - Set a GPP (IN) Pin list to blink every ~100ms
+*
+* DESCRIPTION:
+*
+* INPUT:
+* group - GPP group number
+* mask - 32bit mask value. Each set bit in the mask means that the type
+* of corresponding GPP will be set. Other GPPs are ignored.
+* value - 32bit value that describes GPP blink per pin.
+*
+* OUTPUT:
+* None.
+*
+* EXAMPLE:
+* Set GPP8 to be static and GPP15 to be blinking.
+* mvGppBlinkEn(0, (GPP8 | GPP15),
+* ((MV_GPP_OUT_STATIC & GPP8) | (MV_GPP_OUT_BLINK & GPP15)) );
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvGppBlinkEn(MV_U32 group, MV_U32 mask, MV_U32 value)
+{
+ if (group >= MV_GPP_MAX_GROUP)
+ {
+ DB(mvOsPrintf("mvGppBlinkEn: ERR. invalid group number \n"));
+ return MV_BAD_PARAM;
+ }
+
+ gppRegSet(group, GPP_BLINK_EN_REG(group), mask, value);
+
+ return MV_OK;
+
+}
+/*******************************************************************************
+* mvGppPolaritySet - Set a GPP (IN) Pin list Polarity mode
+*
+* DESCRIPTION:
+*
+* INPUT:
+* group - GPP group number
+* mask - 32bit mask value. Each set bit in the mask means that the type
+* of corresponding GPP will be set. Other GPPs are ignored.
+* value - 32bit value that describes GPP polarity per pin.
+*
+* OUTPUT:
+* None.
+*
+* EXAMPLE:
+* Set GPP8 to the actual pin value and GPP15 to be inverted.
+* mvGppPolaritySet(0, (GPP8 | GPP15),
+* ((MV_GPP_IN_ORIGIN & GPP8) | (MV_GPP_IN_INVERT & GPP15)) );
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvGppPolaritySet(MV_U32 group, MV_U32 mask, MV_U32 value)
+{
+ if (group >= MV_GPP_MAX_GROUP)
+ {
+ DB(mvOsPrintf("mvGppPolaritySet: ERR. invalid group number \n"));
+ return MV_BAD_PARAM;
+ }
+
+ gppRegSet(group, GPP_DATA_IN_POL_REG(group), mask, value);
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvGppPolarityGet - Get a value of relevant bits from GPP Polarity register.
+*
+* DESCRIPTION:
+*
+* INPUT:
+* group - GPP group number
+* mask - 32bit mask value. Each set bit in the mask means that the
+* returned value is valid for it.
+*
+* OUTPUT:
+* None.
+*
+* EXAMPLE:
+* Get GPP8 and GPP15 value.
+* mvGppPolarityGet(0, (GPP8 | GPP15));
+*
+* RETURN:
+* 32bit value that describes GPP polatity mode per pin.
+*
+*******************************************************************************/
+MV_U32 mvGppPolarityGet(MV_U32 group, MV_U32 mask)
+{
+ MV_U32 regVal;
+
+ if (group >= MV_GPP_MAX_GROUP)
+ {
+ DB(mvOsPrintf("mvGppActiveSet: Error invalid group number \n"));
+ return MV_ERROR;
+ }
+ regVal = MV_REG_READ(GPP_DATA_IN_POL_REG(group));
+
+ return (regVal & mask);
+}
+
+/*******************************************************************************
+* mvGppValueGet - Get a GPP Pin list value.
+*
+* DESCRIPTION:
+* This function get GPP value.
+*
+* INPUT:
+* group - GPP group number
+* mask - 32bit mask value. Each set bit in the mask means that the
+* returned value is valid for it.
+*
+* OUTPUT:
+* None.
+*
+* EXAMPLE:
+* Get GPP8 and GPP15 value.
+* mvGppValueGet(0, (GPP8 | GPP15));
+*
+* RETURN:
+* 32bit value that describes GPP activity mode per pin.
+*
+*******************************************************************************/
+MV_U32 mvGppValueGet(MV_U32 group, MV_U32 mask)
+{
+ MV_U32 gppData;
+
+ gppData = MV_REG_READ(GPP_DATA_IN_REG(group));
+
+ gppData &= mask;
+
+ return gppData;
+
+}
+
+/*******************************************************************************
+* mvGppValueSet - Set a GPP Pin list value.
+*
+* DESCRIPTION:
+* This function set value for given GPP pin list.
+*
+* INPUT:
+* group - GPP group number
+* mask - 32bit mask value. Each set bit in the mask means that the
+* value of corresponding GPP will be set accordingly. Other GPP
+* are not affected.
+* value - 32bit value that describes GPP value per pin.
+*
+* OUTPUT:
+* None.
+*
+* EXAMPLE:
+* Set GPP8 value of '0' and GPP15 value of '1'.
+* mvGppActiveSet(0, (GPP8 | GPP15), ((0 & GPP8) | (GPP15)) );
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvGppValueSet (MV_U32 group, MV_U32 mask, MV_U32 value)
+{
+ MV_U32 outEnable, tmp;
+ MV_U32 i;
+
+ if (group >= MV_GPP_MAX_GROUP)
+ {
+ DB(mvOsPrintf("mvGppValueSet: Error invalid group number \n"));
+ return MV_BAD_PARAM;
+ }
+
+ /* verify that the gpp pin is configured as output */
+ /* Note that in the register out enabled -> bit = '0'. */
+ outEnable = ~MV_REG_READ(GPP_DATA_OUT_EN_REG(group));
+
+ /* Workaround for Erratum FE-MISC-70*/
+ if(mvCtrlRevGet()==MV_88F6XXX_A0_REV && (group == 1))
+ {
+ tmp = ~MV_REG_READ(GPP_DATA_OUT_EN_REG(0));
+ outEnable &= 0xfffffffd;
+ outEnable |= (tmp & 0x2);
+ } /*End of WA*/
+
+ for (i = 0 ; i < 32 ;i++)
+ {
+ if (((mask & (1 << i)) & (outEnable & (1 << i))) != (mask & (1 << i)))
+ {
+ mvOsPrintf("mvGppValueSet: Err. An attempt to set output "\
+ "value to GPP %d in input mode.\n", i);
+ return MV_ERROR;
+ }
+ }
+
+ gppRegSet(group, GPP_DATA_OUT_REG(group), mask, value);
+
+ return MV_OK;
+
+}
+/*******************************************************************************
+* gppRegSet - Set a specific GPP pin on a specific GPP register
+*
+* DESCRIPTION:
+* This function set a specific GPP pin on a specific GPP register
+*
+* INPUT:
+* regOffs - GPP Register offset
+* group - GPP group number
+* mask - 32bit mask value. Each set bit in the mask means that the
+* value of corresponding GPP will be set accordingly. Other GPP
+* are not affected.
+* value - 32bit value that describes GPP value per pin.
+*
+* OUTPUT:
+* None.
+*
+* EXAMPLE:
+* Set GPP8 value of '0' and GPP15 value of '1'.
+* mvGppActiveSet(0, (GPP8 | GPP15), ((0 & GPP8) | (1 & GPP15)) );
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static MV_VOID gppRegSet (MV_U32 group, MV_U32 regOffs,MV_U32 mask,MV_U32 value)
+{
+ MV_U32 gppData;
+
+ gppData = MV_REG_READ(regOffs);
+
+ gppData &= ~mask;
+
+ gppData |= (value & mask);
+
+ MV_REG_WRITE(regOffs, gppData);
+}
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvGppH
+#define __INCmvGppH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "gpp/mvGppRegs.h"
+
+/* These macros describes the GPP type. Each of the GPPs pins can */
+/* be assigned to act as a general purpose input or output pin. */
+#define MV_GPP_IN 0xFFFFFFFF /* GPP input */
+#define MV_GPP_OUT 0 /* GPP output */
+
+
+/* These macros describes the GPP Out Enable. */
+#define MV_GPP_OUT_DIS 0xFFFFFFFF /* Out pin disabled*/
+#define MV_GPP_OUT_EN 0 /* Out pin enabled*/
+
+/* These macros describes the GPP Out Blinking. */
+/* When set and the corresponding bit in GPIO Data Out Enable Control */
+/* Register is enabled, the GPIO pin blinks every ~100 ms (a period of */
+/* 2^24 TCLK clocks). */
+#define MV_GPP_OUT_BLINK 0xFFFFFFFF /* Out pin blinking*/
+#define MV_GPP_OUT_STATIC 0 /* Out pin static*/
+
+
+/* These macros describes the GPP Polarity. */
+/* When set to 1 GPIO Data In Register reflects the inverted value of the */
+/* corresponding pin. */
+
+#define MV_GPP_IN_INVERT 0xFFFFFFFF /* Inverted value is got*/
+#define MV_GPP_IN_ORIGIN 0 /* original value is got*/
+
+/* mvGppTypeSet - Set PP pin mode (IN or OUT) */
+MV_STATUS mvGppTypeSet(MV_U32 group, MV_U32 mask, MV_U32 value);
+
+/* mvGppBlinkEn - Set a GPP (IN) Pin list to blink every ~100ms */
+MV_STATUS mvGppBlinkEn(MV_U32 group, MV_U32 mask, MV_U32 value);
+
+/* mvGppPolaritySet - Set a GPP (IN) Pin list Polarity mode. */
+MV_STATUS mvGppPolaritySet(MV_U32 group, MV_U32 mask, MV_U32 value);
+
+/* mvGppPolarityGet - Get the Polarity of a GPP Pin */
+MV_U32 mvGppPolarityGet(MV_U32 group, MV_U32 mask);
+
+/* mvGppValueGet - Get a GPP Pin list value.*/
+MV_U32 mvGppValueGet(MV_U32 group, MV_U32 mask);
+
+
+/* mvGppValueSet - Set a GPP Pin list value. */
+MV_STATUS mvGppValueSet (MV_U32 group, MV_U32 mask, MV_U32 value);
+
+#endif /* #ifndef __INCmvGppH */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvGppRegsH
+#define __INCmvGppRegsH
+
+#define MV_GPP0 BIT0
+#define MV_GPP1 BIT1
+#define MV_GPP2 BIT2
+#define MV_GPP3 BIT3
+#define MV_GPP4 BIT4
+#define MV_GPP5 BIT5
+#define MV_GPP6 BIT6
+#define MV_GPP7 BIT7
+#define MV_GPP8 BIT8
+#define MV_GPP9 BIT9
+#define MV_GPP10 BIT10
+#define MV_GPP11 BIT11
+#define MV_GPP12 BIT12
+#define MV_GPP13 BIT13
+#define MV_GPP14 BIT14
+#define MV_GPP15 BIT15
+#define MV_GPP16 BIT16
+#define MV_GPP17 BIT17
+#define MV_GPP18 BIT18
+#define MV_GPP19 BIT19
+#define MV_GPP20 BIT20
+#define MV_GPP21 BIT21
+#define MV_GPP22 BIT22
+#define MV_GPP23 BIT23
+#define MV_GPP24 BIT24
+#define MV_GPP25 BIT25
+#define MV_GPP26 BIT26
+#define MV_GPP27 BIT27
+#define MV_GPP28 BIT28
+#define MV_GPP29 BIT29
+#define MV_GPP30 BIT30
+#define MV_GPP31 BIT31
+
+
+/* registers offsets */
+
+#define GPP_DATA_OUT_REG(grp) ((grp == 0) ? 0x10100 : 0x10140)
+#define GPP_DATA_OUT_EN_REG(grp) ((grp == 0) ? 0x10104 : 0x10144)
+#define GPP_BLINK_EN_REG(grp) ((grp == 0) ? 0x10108 : 0x10148)
+#define GPP_DATA_IN_POL_REG(grp) ((grp == 0) ? 0x1010C : 0x1014c)
+#define GPP_DATA_IN_REG(grp) ((grp == 0) ? 0x10110 : 0x10150)
+#define GPP_INT_CAUSE_REG(grp) ((grp == 0) ? 0x10114 : 0x10154)
+#define GPP_INT_MASK_REG(grp) ((grp == 0) ? 0x10118 : 0x10158)
+#define GPP_INT_LVL_REG(grp) ((grp == 0) ? 0x1011c : 0x1015c)
+
+#define GPP_DATA_OUT_SET_REG 0x10120
+#define GPP_DATA_OUT_CLEAR_REG 0x10124
+
+#endif /* #ifndef __INCmvGppRegsH */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvPciIf.h"
+#include "ctrlEnv/sys/mvSysPex.h"
+
+#if defined(MV_INCLUDE_PCI)
+#include "ctrlEnv/sys/mvSysPci.h"
+#endif
+
+
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+
+/*******************************************************************************
+* mvPciInit - Initialize PCI interfaces
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM
+*
+*******************************************************************************/
+
+
+MV_STATUS mvPciIfInit(MV_U32 pciIf, PCI_IF_MODE pciIfmode)
+{
+ PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+ if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PCI)
+
+ MV_PCI_MOD pciMod;
+
+ if (PCI_IF_MODE_HOST == pciIfmode)
+ {
+ pciMod = MV_PCI_MOD_HOST;
+ }
+ else if (PCI_IF_MODE_DEVICE == pciIfmode)
+ {
+ pciMod = MV_PCI_MOD_DEVICE;
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Bus %d mode %d neither host nor device!\n",
+ __FUNCTION__, pciIf, pciIfmode);
+ return MV_FAIL;
+ }
+
+ return mvPciInit(pciIf - MV_PCI_START_IF, pciMod);
+ #else
+ return MV_OK;
+ #endif
+ }
+ else if (PCI_IF_TYPE_PEX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PEX)
+
+ MV_PEX_TYPE pexType;
+
+ if (PCI_IF_MODE_HOST == pciIfmode)
+ {
+ pexType = MV_PEX_ROOT_COMPLEX;
+ }
+ else if (PCI_IF_MODE_DEVICE == pciIfmode)
+ {
+ pexType = MV_PEX_END_POINT;
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Bus %d type %d neither root complex nor" \
+ " end point\n", __FUNCTION__, pciIf, pciIfmode);
+ return MV_FAIL;
+ }
+ return mvPexInit(pciIf - MV_PEX_START_IF, pexType);
+
+ #else
+ return MV_OK;
+ #endif
+
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+ }
+
+ return MV_FAIL;
+
+}
+
+/* PCI configuration space read write */
+
+/*******************************************************************************
+* mvPciConfigRead - Read from configuration space
+*
+* DESCRIPTION:
+* This function performs a 32 bit read from PCI configuration space.
+* It supports both type 0 and type 1 of Configuration Transactions
+* (local and over bridge). In order to read from local bus segment, use
+* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers
+* will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+* pciIf - PCI interface number.
+* bus - PCI segment bus number.
+* dev - PCI device number.
+* func - Function number.
+* regOffs - Register offset.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit register data, 0xffffffff on error
+*
+*******************************************************************************/
+MV_U32 mvPciIfConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_U32 func,
+ MV_U32 regOff)
+{
+ PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+ if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PCI)
+ return mvPciConfigRead(pciIf - MV_PCI_START_IF,
+ bus,
+ dev,
+ func,
+ regOff);
+ #else
+ return 0xffffffff;
+ #endif
+ }
+ else if (PCI_IF_TYPE_PEX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PEX)
+ return mvPexConfigRead(pciIf - MV_PEX_START_IF,
+ bus,
+ dev,
+ func,
+ regOff);
+ #else
+ return 0xffffffff;
+ #endif
+
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+ }
+
+ return 0;
+
+}
+
+/*******************************************************************************
+* mvPciConfigWrite - Write to configuration space
+*
+* DESCRIPTION:
+* This function performs a 32 bit write to PCI configuration space.
+* It supports both type 0 and type 1 of Configuration Transactions
+* (local and over bridge). In order to write to local bus segment, use
+* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers
+* will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+* pciIf - PCI interface number.
+* bus - PCI segment bus number.
+* dev - PCI device number.
+* func - Function number.
+* regOffs - Register offset.
+* data - 32bit data.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciIfConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data)
+{
+ PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+ if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PCI)
+ return mvPciConfigWrite(pciIf - MV_PCI_START_IF,
+ bus,
+ dev,
+ func,
+ regOff,
+ data);
+ #else
+ return MV_OK;
+ #endif
+ }
+ else if (PCI_IF_TYPE_PEX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PEX)
+ return mvPexConfigWrite(pciIf - MV_PEX_START_IF,
+ bus,
+ dev,
+ func,
+ regOff,
+ data);
+ #else
+ return MV_OK;
+ #endif
+
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+ }
+
+ return MV_FAIL;
+
+}
+
+/*******************************************************************************
+* mvPciMasterEnable - Enable/disale PCI interface master transactions.
+*
+* DESCRIPTION:
+* This function performs read modified write to PCI command status
+* (offset 0x4) to set/reset bit 2. After this bit is set, the PCI
+* master is allowed to gain ownership on the bus, otherwise it is
+* incapable to do so.
+*
+* INPUT:
+* pciIf - PCI interface number.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciIfMasterEnable(MV_U32 pciIf, MV_BOOL enable)
+{
+
+ PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+ if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PCI)
+ return mvPciMasterEnable(pciIf - MV_PCI_START_IF,
+ enable);
+ #else
+ return MV_OK;
+ #endif
+ }
+ else if (PCI_IF_TYPE_PEX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PEX)
+ return mvPexMasterEnable(pciIf - MV_PEX_START_IF,
+ enable);
+ #else
+ return MV_OK;
+ #endif
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+ }
+
+ return MV_FAIL;
+
+}
+
+
+/*******************************************************************************
+* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.
+*
+* DESCRIPTION:
+* This function performs read modified write to PCI command status
+* (offset 0x4) to set/reset bit 0 and 1. After those bits are set,
+* the PCI slave is allowed to respond to PCI IO space access (bit 0)
+* and PCI memory space access (bit 1).
+*
+* INPUT:
+* pciIf - PCI interface number.
+* dev - PCI device number.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciIfSlaveEnable(MV_U32 pciIf,MV_U32 bus, MV_U32 dev, MV_BOOL enable)
+{
+
+ PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+ if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PCI)
+ return mvPciSlaveEnable(pciIf - MV_PCI_START_IF,bus,dev,
+ enable);
+ #else
+ return MV_OK;
+ #endif
+ }
+ else if (PCI_IF_TYPE_PEX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PEX)
+ return mvPexSlaveEnable(pciIf - MV_PEX_START_IF,bus,dev,
+ enable);
+ #else
+ return MV_OK;
+ #endif
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+ }
+
+ return MV_FAIL;
+
+}
+
+/*******************************************************************************
+* mvPciLocalBusNumSet - Set PCI interface local bus number.
+*
+* DESCRIPTION:
+* This function sets given PCI interface its local bus number.
+* Note: In case the PCI interface is PCI-X, the information is read-only.
+*
+* INPUT:
+* pciIf - PCI interface number.
+* busNum - Bus number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_NOT_ALLOWED in case PCI interface is PCI-X.
+* MV_BAD_PARAM on bad parameters ,
+* otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciIfLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum)
+{
+ PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+ if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PCI)
+ return mvPciLocalBusNumSet(pciIf - MV_PCI_START_IF,
+ busNum);
+ #else
+ return MV_OK;
+ #endif
+ }
+ else if (PCI_IF_TYPE_PEX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PEX)
+ return mvPexLocalBusNumSet(pciIf - MV_PEX_START_IF,
+ busNum);
+ #else
+ return MV_OK;
+ #endif
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+ }
+
+ return MV_FAIL;
+
+}
+
+/*******************************************************************************
+* mvPciLocalBusNumGet - Get PCI interface local bus number.
+*
+* DESCRIPTION:
+* This function gets the local bus number of a given PCI interface.
+*
+* INPUT:
+* pciIf - PCI interface number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Local bus number.0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPciIfLocalBusNumGet(MV_U32 pciIf)
+{
+ PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+ if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PCI)
+ return mvPciLocalBusNumGet(pciIf - MV_PCI_START_IF);
+ #else
+ return 0xFFFFFFFF;
+ #endif
+ }
+ else if (PCI_IF_TYPE_PEX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PEX)
+ return mvPexLocalBusNumGet(pciIf - MV_PEX_START_IF);
+ #else
+ return 0xFFFFFFFF;
+ #endif
+
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n",__FUNCTION__, pciIf);
+ }
+
+ return 0;
+
+}
+
+
+/*******************************************************************************
+* mvPciLocalDevNumSet - Set PCI interface local device number.
+*
+* DESCRIPTION:
+* This function sets given PCI interface its local device number.
+* Note: In case the PCI interface is PCI-X, the information is read-only.
+*
+* INPUT:
+* pciIf - PCI interface number.
+* devNum - Device number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_NOT_ALLOWED in case PCI interface is PCI-X. MV_BAD_PARAM on bad parameters ,
+* otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciIfLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum)
+{
+ PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+ if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PCI)
+ return mvPciLocalDevNumSet(pciIf - MV_PCI_START_IF,
+ devNum);
+ #else
+ return MV_OK;
+ #endif
+ }
+ else if (PCI_IF_TYPE_PEX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PEX)
+ return mvPexLocalDevNumSet(pciIf - MV_PEX_START_IF,
+ devNum);
+ #else
+ return MV_OK;
+ #endif
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+ }
+
+ return MV_FAIL;
+
+}
+
+/*******************************************************************************
+* mvPciLocalDevNumGet - Get PCI interface local device number.
+*
+* DESCRIPTION:
+* This function gets the local device number of a given PCI interface.
+*
+* INPUT:
+* pciIf - PCI interface number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Local device number. 0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPciIfLocalDevNumGet(MV_U32 pciIf)
+{
+ PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+ if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PCI)
+ return mvPciLocalDevNumGet(pciIf - MV_PCI_START_IF);
+ #else
+ return 0xFFFFFFFF;
+ #endif
+ }
+ else if (PCI_IF_TYPE_PEX == pciIfType)
+ {
+ #if defined(MV_INCLUDE_PEX)
+ return mvPexLocalDevNumGet(pciIf - MV_PEX_START_IF);
+ #else
+ return 0xFFFFFFFF;
+ #endif
+
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+ }
+
+ return 0;
+
+}
+
+/*******************************************************************************
+* mvPciIfTypeGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*******************************************************************************/
+
+PCI_IF_TYPE mvPciIfTypeGet(MV_U32 pciIf)
+{
+
+ if ((pciIf >= MV_PCI_START_IF)&&(pciIf < MV_PCI_MAX_IF + MV_PCI_START_IF))
+ {
+ return PCI_IF_TYPE_CONVEN_PCIX;
+ }
+ else if ((pciIf >= MV_PEX_START_IF) &&
+ (pciIf < MV_PEX_MAX_IF + MV_PEX_START_IF))
+ {
+ return PCI_IF_TYPE_PEX;
+
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+ }
+
+ return 0xffffffff;
+
+}
+
+/*******************************************************************************
+* mvPciIfTypeGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+*
+*******************************************************************************/
+
+MV_U32 mvPciRealIfNumGet(MV_U32 pciIf)
+{
+
+ PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+ if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+ {
+ return (pciIf - MV_PCI_START_IF);
+ }
+ else if (PCI_IF_TYPE_PEX == pciIfType)
+ {
+ return (pciIf - MV_PEX_START_IF);
+
+ }
+ else
+ {
+ mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+ }
+
+ return 0xffffffff;
+
+}
+
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCPCIIFH
+#define __INCPCIIFH
+
+#include "mvSysHwConfig.h"
+#include "pci-if/mvPciIfRegs.h"
+#if defined(MV_INCLUDE_PEX)
+#include "pex/mvPex.h"
+#endif
+#if defined(MV_INCLUDE_PCI)
+#include "pci/mvPci.h"
+#endif
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+typedef enum _mvPCIIfType
+{
+ PCI_IF_TYPE_CONVEN_PCIX,
+ PCI_IF_TYPE_PEX
+
+}PCI_IF_TYPE;
+
+typedef enum _mvPCIIfMode
+{
+ PCI_IF_MODE_HOST,
+ PCI_IF_MODE_DEVICE
+}PCI_IF_MODE;
+
+
+/* Global Functions prototypes */
+
+/* mvPciIfInit - Initialize PCI interfaces*/
+MV_STATUS mvPciIfInit(MV_U32 pciIf, PCI_IF_MODE pciIfmode);
+
+/* mvPciIfConfigRead - Read from configuration space */
+MV_U32 mvPciIfConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func,MV_U32 regOff);
+
+/* mvPciIfConfigWrite - Write to configuration space */
+MV_STATUS mvPciIfConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data);
+
+/* mvPciIfMasterEnable - Enable/disale PCI interface master transactions.*/
+MV_STATUS mvPciIfMasterEnable(MV_U32 pciIf, MV_BOOL enable);
+
+/* mvPciIfSlaveEnable - Enable/disale PCI interface slave transactions.*/
+MV_STATUS mvPciIfSlaveEnable(MV_U32 pciIf,MV_U32 bus, MV_U32 dev,
+ MV_BOOL enable);
+
+/* mvPciIfLocalBusNumSet - Set PCI interface local bus number.*/
+MV_STATUS mvPciIfLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum);
+
+/* mvPciIfLocalBusNumGet - Get PCI interface local bus number.*/
+MV_U32 mvPciIfLocalBusNumGet(MV_U32 pciIf);
+
+/* mvPciIfLocalDevNumSet - Set PCI interface local device number.*/
+MV_STATUS mvPciIfLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum);
+
+/* mvPciIfLocalDevNumGet - Get PCI interface local device number.*/
+MV_U32 mvPciIfLocalDevNumGet(MV_U32 pciIf);
+
+/* mvPciIfTypeGet - Get PCI If type*/
+PCI_IF_TYPE mvPciIfTypeGet(MV_U32 pciIf);
+
+MV_U32 mvPciRealIfNumGet(MV_U32 pciIf);
+
+/* mvPciIfAddrDecShow - Display address decode windows attributes */
+MV_VOID mvPciIfAddrDecShow(MV_VOID);
+
+#endif /* #ifndef __INCPCIIFH */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCPCIIFREGSH
+#define __INCPCIIFREGSH
+
+
+/* defines */
+#define MAX_PCI_DEVICES 32
+#define MAX_PCI_FUNCS 8
+#define MAX_PCI_BUSSES 128
+
+/***************************************/
+/* PCI Configuration registers */
+/***************************************/
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers */
+/*********************************************/
+
+
+/* Standard registers */
+#define PCI_DEVICE_AND_VENDOR_ID 0x000
+#define PCI_STATUS_AND_COMMAND 0x004
+#define PCI_CLASS_CODE_AND_REVISION_ID 0x008
+#define PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE 0x00C
+#define PCI_MEMORY_BAR_BASE_ADDR(barNum) (0x010 + ((barNum) << 2))
+#define PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID 0x02C
+#define PCI_EXPANSION_ROM_BASE_ADDR_REG 0x030
+#define PCI_CAPABILTY_LIST_POINTER 0x034
+#define PCI_INTERRUPT_PIN_AND_LINE 0x03C
+
+
+/* PCI Device and Vendor ID Register (PDVIR) */
+#define PDVIR_VEN_ID_OFFS 0 /* Vendor ID */
+#define PDVIR_VEN_ID_MASK (0xffff << PDVIR_VEN_ID_OFFS)
+
+#define PDVIR_DEV_ID_OFFS 16 /* Device ID */
+#define PDVIR_DEV_ID_MASK (0xffff << PDVIR_DEV_ID_OFFS)
+
+/* PCI Status and Command Register (PSCR) */
+#define PSCR_IO_EN BIT0 /* IO Enable */
+#define PSCR_MEM_EN BIT1 /* Memory Enable */
+#define PSCR_MASTER_EN BIT2 /* Master Enable */
+#define PSCR_SPECIAL_EN BIT3 /* Special Cycle Enable */
+#define PSCR_MEM_WRI_INV BIT4 /* Memory Write and Invalidate Enable */
+#define PSCR_VGA BIT5 /* VGA Palette Snoops */
+#define PSCR_PERR_EN BIT6 /* Parity Errors Respond Enable */
+#define PSCR_ADDR_STEP BIT7 /* Address Stepping Enable (Wait Cycle En)*/
+#define PSCR_SERR_EN BIT8 /* Ability to assert SERR# line */
+#define PSCR_FAST_BTB_EN BIT9 /* generate fast back-to-back transactions*/
+#define PSCR_CAP_LIST BIT20 /* Capability List Support */
+#define PSCR_66MHZ_EN BIT21 /* 66 MHz Capable */
+#define PSCR_UDF_EN BIT22 /* User definable features */
+#define PSCR_TAR_FAST_BB BIT23 /* fast back-to-back transactions capable */
+#define PSCR_DATA_PERR BIT24 /* Data Parity reported */
+
+#define PSCR_DEVSEL_TIM_OFFS 25 /* DEVSEL timing */
+#define PSCR_DEVSEL_TIM_MASK (0x3 << PSCR_DEVSEL_TIM_OFFS)
+#define PSCR_DEVSEL_TIM_FAST (0x0 << PSCR_DEVSEL_TIM_OFFS)
+#define PSCR_DEVSEL_TIM_MED (0x1 << PSCR_DEVSEL_TIM_OFFS)
+#define PSCR_DEVSEL_TIM_SLOW (0x2 << PSCR_DEVSEL_TIM_OFFS)
+
+#define PSCR_SLAVE_TABORT BIT27 /* Signalled Target Abort */
+#define PSCR_MASTER_TABORT BIT28 /* Recieved Target Abort */
+#define PSCR_MABORT BIT29 /* Recieved Master Abort */
+#define PSCR_SYSERR BIT30 /* Signalled system error */
+#define PSCR_DET_PARERR BIT31 /* Detect Parity Error */
+
+/* PCI configuration register offset=0x08 fields
+ (PCI_CLASS_CODE_AND_REVISION_ID)(PCCRI) */
+
+#define PCCRIR_REVID_OFFS 0 /* Revision ID */
+#define PCCRIR_REVID_MASK (0xff << PCCRIR_REVID_OFFS)
+
+#define PCCRIR_FULL_CLASS_OFFS 8 /* Full Class Code */
+#define PCCRIR_FULL_CLASS_MASK (0xffffff << PCCRIR_FULL_CLASS_OFFS)
+
+#define PCCRIR_PROGIF_OFFS 8 /* Prog .I/F*/
+#define PCCRIR_PROGIF_MASK (0xff << PCCRIR_PROGIF_OFFS)
+
+#define PCCRIR_SUB_CLASS_OFFS 16 /* Sub Class*/
+#define PCCRIR_SUB_CLASS_MASK (0xff << PCCRIR_SUB_CLASS_OFFS)
+
+#define PCCRIR_BASE_CLASS_OFFS 24 /* Base Class*/
+#define PCCRIR_BASE_CLASS_MASK (0xff << PCCRIR_BASE_CLASS_OFFS)
+
+/* PCI configuration register offset=0x0C fields
+ (PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE)(PBHTLTCL) */
+
+#define PBHTLTCLR_CACHELINE_OFFS 0 /* Specifies the cache line size */
+#define PBHTLTCLR_CACHELINE_MASK (0xff << PBHTLTCLR_CACHELINE_OFFS)
+
+#define PBHTLTCLR_LATTIMER_OFFS 8 /* latency timer */
+#define PBHTLTCLR_LATTIMER_MASK (0xff << PBHTLTCLR_LATTIMER_OFFS)
+
+#define PBHTLTCLR_HEADTYPE_FULL_OFFS 16 /* Full Header Type */
+#define PBHTLTCLR_HEADTYPE_FULL_MASK (0xff << PBHTLTCLR_HEADTYPE_FULL_OFFS)
+
+#define PBHTLTCLR_MULTI_FUNC BIT23 /* Multi/Single function */
+
+#define PBHTLTCLR_HEADER_OFFS 16 /* Header type */
+#define PBHTLTCLR_HEADER_MASK (0x7f << PBHTLTCLR_HEADER_OFFS)
+#define PBHTLTCLR_HEADER_STANDARD (0x0 << PBHTLTCLR_HEADER_OFFS)
+#define PBHTLTCLR_HEADER_PCI2PCI_BRIDGE (0x1 << PBHTLTCLR_HEADER_OFFS)
+
+
+#define PBHTLTCLR_BISTCOMP_OFFS 24 /* BIST Completion Code */
+#define PBHTLTCLR_BISTCOMP_MASK (0xf << PBHTLTCLR_BISTCOMP_OFFS)
+
+#define PBHTLTCLR_BISTACT BIT30 /* BIST Activate bit */
+#define PBHTLTCLR_BISTCAP BIT31 /* BIST Capable Bit */
+
+
+/* PCI Bar Base Low Register (PBBLR) */
+#define PBBLR_IOSPACE BIT0 /* Memory Space Indicator */
+
+#define PBBLR_TYPE_OFFS 1 /* BAR Type/Init Val. */
+#define PBBLR_TYPE_MASK (0x3 << PBBLR_TYPE_OFFS)
+#define PBBLR_TYPE_32BIT_ADDR (0x0 << PBBLR_TYPE_OFFS)
+#define PBBLR_TYPE_64BIT_ADDR (0x2 << PBBLR_TYPE_OFFS)
+
+#define PBBLR_PREFETCH_EN BIT3 /* Prefetch Enable */
+
+
+#define PBBLR_MEM_BASE_OFFS 4 /* Memory Bar Base address. Corresponds to
+ address bits [31:4] */
+#define PBBLR_MEM_BASE_MASK (0xfffffff << PBBLR_MEM_BASE_OFFS)
+
+#define PBBLR_IO_BASE_OFFS 2 /* IO Bar Base address. Corresponds to
+ address bits [31:2] */
+#define PBBLR_IO_BASE_MASK (0x3fffffff << PBBLR_IO_BASE_OFFS)
+
+
+#define PBBLR_BASE_OFFS 12 /* Base address. Address bits [31:12] */
+#define PBBLR_BASE_MASK (0xfffff << PBBLR_BASE_OFFS)
+#define PBBLR_BASE_ALIGNMET (1 << PBBLR_BASE_OFFS)
+
+
+/* PCI Bar Base High Fegister (PBBHR) */
+#define PBBHR_BASE_OFFS 0 /* Base address. Address bits [31:12] */
+#define PBBHR_BASE_MASK (0xffffffff << PBBHR_BASE_OFFS)
+
+
+/* PCI configuration register offset=0x2C fields
+ (PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID)(PSISVI) */
+
+#define PSISVIR_VENID_OFFS 0 /* Subsystem Manufacturer Vendor ID Number */
+#define PSISVIR_VENID_MASK (0xffff << PSISVIR_VENID_OFFS)
+
+#define PSISVIR_DEVID_OFFS 16 /* Subsystem Device ID Number */
+#define PSISVIR_DEVID_MASK (0xffff << PSISVIR_DEVID_OFFS)
+
+/* PCI configuration register offset=0x30 fields
+ (PCI_EXPANSION_ROM_BASE_ADDR_REG)(PERBA) */
+
+#define PERBAR_EXPROMEN BIT0 /* Expansion ROM Enable */
+
+#define PERBAR_BASE_OFFS 12 /* Expansion ROM Base Address */
+#define PERBAR_BASE_MASK (0xfffff << PERBAR_BASE_OFFS)
+
+/* PCI configuration register offset=0x34 fields
+ (PCI_CAPABILTY_LIST_POINTER)(PCLP) */
+
+#define PCLPR_CAPPTR_OFFS 0 /* Capability List Pointer */
+#define PCLPR_CAPPTR_MASK (0xff << PCLPR_CAPPTR_OFFS)
+
+/* PCI configuration register offset=0x3C fields
+ (PCI_INTERRUPT_PIN_AND_LINE)(PIPL) */
+
+#define PIPLR_INTLINE_OFFS 0 /* Interrupt line (IRQ) */
+#define PIPLR_INTLINE_MASK (0xff << PIPLR_INTLINE_OFFS)
+
+#define PIPLR_INTPIN_OFFS 8 /* interrupt pin (A,B,C,D) */
+#define PIPLR_INTPIN_MASK (0xff << PIPLR_INTPIN_OFFS)
+
+#define PIPLR_MINGRANT_OFFS 16 /* Minimum Grant on 250 nano seconds units */
+#define PIPLR_MINGRANT_MASK (0xff << PIPLR_MINGRANT_OFFS)
+
+#define PIPLR_MAXLATEN_OFFS 24 /* Maximum latency on 250 nano seconds units */
+#define PIPLR_MAXLATEN_MASK (0xff << PIPLR_MAXLATEN_OFFS)
+
+#endif /* #ifndef __INCPCIIFREGSH */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/* includes */
+#include "mvPciUtils.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* #define MV_DEBUG */
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+ #define mvOsPrintf printf
+#else
+ #define DB(x)
+#endif
+
+/*
+This module only support scanning of Header type 00h of pci devices
+There is no suppotr for Header type 01h of pci devices ( PCI bridges )
+*/
+
+
+static MV_STATUS pciDetectDevice(MV_U32 pciIf,
+ MV_U32 bus,
+ MV_U32 dev,
+ MV_U32 func,
+ MV_PCI_DEVICE *pPciAgent);
+
+static MV_U32 pciDetectDeviceBars(MV_U32 pciIf,
+ MV_U32 bus,
+ MV_U32 dev,
+ MV_U32 func,
+ MV_PCI_DEVICE *pPciAgent);
+
+
+
+
+
+
+/*******************************************************************************
+* mvPciScan - Scan a PCI interface bus
+*
+* DESCRIPTION:
+* Performs a full scan on a PCI interface and returns all possible details
+* on the agents found on the bus.
+*
+* INPUT:
+* pciIf - PCI Interface
+* pPciAgents - Pointer to an Array of the pci agents to be detected
+* pPciAgentsNum - pPciAgents array maximum number of elements
+*
+* OUTPUT:
+* pPciAgents - Array of the pci agents detected on the bus
+* pPciAgentsNum - Number of pci agents detected on the bus
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+
+MV_STATUS mvPciScan(MV_U32 pciIf,
+ MV_PCI_DEVICE *pPciAgents,
+ MV_U32 *pPciAgentsNum)
+{
+
+ MV_U32 devIndex,funcIndex=0,busIndex=0,detectedDevNum=0;
+ MV_U32 localBus=mvPciIfLocalBusNumGet(pciIf);
+ MV_PCI_DEVICE *pPciDevice;
+ MV_PCI_DEVICE *pMainDevice;
+
+ DB(mvOsPrintf("mvPciScan: PCI interface num %d\n", pciIf));
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPexMaxIfGet())
+ {
+ DB(mvOsPrintf("mvPciScan: ERR. Invalid PCI interface num %d\n", pciIf));
+ return MV_BAD_PARAM;
+ }
+ if (NULL == pPciAgents)
+ {
+ DB(mvOsPrintf("mvPciScan: ERR. pPciAgents=NULL \n"));
+ return MV_BAD_PARAM;
+ }
+ if (NULL == pPciAgentsNum)
+ {
+ DB(mvOsPrintf("mvPciScan: ERR. pPciAgentsNum=NULL \n"));
+ return MV_BAD_PARAM;
+ }
+
+
+ DB(mvOsPrintf("mvPciScan: PCI interface num %d mvPciMasterEnable\n", pciIf));
+ /* Master enable the MV PCI master */
+ if (MV_OK != mvPciIfMasterEnable(pciIf,MV_TRUE))
+ {
+ DB(mvOsPrintf("mvPciScan: ERR. mvPciMasterEnable failed \n"));
+ return MV_ERROR;
+
+ }
+
+ DB(mvOsPrintf("mvPciScan: PCI interface num scan%d\n", pciIf));
+
+ /* go through all busses */
+ for (busIndex=localBus ; busIndex < MAX_PCI_BUSSES ; busIndex++)
+ {
+ /* go through all possible devices on the local bus */
+ for (devIndex=0 ; devIndex < MAX_PCI_DEVICES ; devIndex++)
+ {
+ /* always start with function equal to zero */
+ funcIndex=0;
+
+ pPciDevice=&pPciAgents[detectedDevNum];
+ DB(mvOsPrintf("mvPciScan: PCI interface num scan%d:%d\n", busIndex, devIndex));
+
+ if (MV_ERROR == pciDetectDevice(pciIf,
+ busIndex,
+ devIndex,
+ funcIndex,
+ pPciDevice))
+ {
+ /* no device detected , try the next address */
+ continue;
+ }
+
+ /* We are here ! means we have detected a device*/
+ /* always we start with only one function per device */
+ pMainDevice = pPciDevice;
+ pPciDevice->funtionsNum = 1;
+
+
+ /* move on */
+ detectedDevNum++;
+
+
+ /* check if we have no more room for a new device */
+ if (detectedDevNum == *pPciAgentsNum)
+ {
+ DB(mvOsPrintf("mvPciScan: ERR. array passed too small \n"));
+ return MV_ERROR;
+ }
+
+ /* check the detected device if it is a multi functional device then
+ scan all device functions*/
+ if (pPciDevice->isMultiFunction == MV_TRUE)
+ {
+ /* start with function number 1 because we have already detected
+ function 0 */
+ for (funcIndex=1; funcIndex<MAX_PCI_FUNCS ; funcIndex++)
+ {
+ pPciDevice=&pPciAgents[detectedDevNum];
+
+ if (MV_ERROR == pciDetectDevice(pciIf,
+ busIndex,
+ devIndex,
+ funcIndex,
+ pPciDevice))
+ {
+ /* no device detected means no more functions !*/
+ continue;
+ }
+ /* We are here ! means we have detected a device */
+
+ /* move on */
+ pMainDevice->funtionsNum++;
+ detectedDevNum++;
+
+ /* check if we have no more room for a new device */
+ if (detectedDevNum == *pPciAgentsNum)
+ {
+ DB(mvOsPrintf("mvPciScan: ERR. Array too small\n"));
+ return MV_ERROR;
+ }
+
+
+ }
+ }
+
+ }
+
+ }
+
+ /* return the number of devices actually detected on the bus ! */
+ *pPciAgentsNum = detectedDevNum;
+
+ return MV_OK;
+
+}
+
+
+/*******************************************************************************
+* pciDetectDevice - Detect a pci device parameters
+*
+* DESCRIPTION:
+* This function detect if a pci agent exist on certain address !
+* and if exists then it fills all possible information on the
+* agent
+*
+* INPUT:
+* pciIf - PCI Interface
+* bus - Bus number
+* dev - Device number
+* func - Function number
+*
+*
+*
+* OUTPUT:
+* pPciAgent - pointer to the pci agent filled with its information
+*
+* RETURN:
+* MV_ERROR if no device , MV_OK otherwise
+*
+*******************************************************************************/
+
+static MV_STATUS pciDetectDevice(MV_U32 pciIf,
+ MV_U32 bus,
+ MV_U32 dev,
+ MV_U32 func,
+ MV_PCI_DEVICE *pPciAgent)
+{
+ MV_U32 pciData;
+
+ /* no Parameters checking ! because it is static function and it is assumed
+ that all parameters were checked in the calling function */
+
+
+ /* Try read the PCI Vendor ID and Device ID */
+
+ /* We will scan only ourselves and the PCI slots that exist on the
+ board, because we may have a case that we have one slot that has
+ a Cardbus connector, and because CardBus answers all IDsels we want
+ to scan only this slot and ourseleves.
+
+ */
+ #if defined(MV_INCLUDE_PCI)
+ if ((PCI_IF_TYPE_CONVEN_PCIX == mvPciIfTypeGet(pciIf)) &&
+ (DB_88F5181_DDR1_PRPMC != mvBoardIdGet()) &&
+ (DB_88F5181_DDR1_PEXPCI != mvBoardIdGet()) &&
+ (DB_88F5181_DDR1_MNG != mvBoardIdGet()))
+ {
+
+ if (mvBoardIsOurPciSlot(bus, dev) == MV_FALSE)
+ {
+ return MV_ERROR;
+ }
+ }
+ #endif /* defined(MV_INCLUDE_PCI) */
+
+ pciData = mvPciIfConfigRead(pciIf, bus,dev,func, PCI_DEVICE_AND_VENDOR_ID);
+
+ if (PCI_ERROR_CODE == pciData)
+ {
+ /* no device exist */
+ return MV_ERROR;
+ }
+
+ /* we are here ! means a device is detected */
+
+ /* fill basic information */
+ pPciAgent->busNumber=bus;
+ pPciAgent->deviceNum=dev;
+ pPciAgent->function=func;
+
+ /* Fill the PCI Vendor ID and Device ID */
+
+ pPciAgent->venID = (pciData & PDVIR_VEN_ID_MASK) >> PDVIR_VEN_ID_OFFS;
+ pPciAgent->deviceID = (pciData & PDVIR_DEV_ID_MASK) >> PDVIR_DEV_ID_OFFS;
+
+ /* Read Status and command */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_STATUS_AND_COMMAND);
+
+
+ /* Fill related Status and Command information*/
+
+ if (pciData & PSCR_TAR_FAST_BB)
+ {
+ pPciAgent->isFastB2BCapable = MV_TRUE;
+ }
+ else
+ {
+ pPciAgent->isFastB2BCapable = MV_FALSE;
+ }
+
+ if (pciData & PSCR_CAP_LIST)
+ {
+ pPciAgent->isCapListSupport=MV_TRUE;
+ }
+ else
+ {
+ pPciAgent->isCapListSupport=MV_FALSE;
+ }
+
+ if (pciData & PSCR_66MHZ_EN)
+ {
+ pPciAgent->is66MHZCapable=MV_TRUE;
+ }
+ else
+ {
+ pPciAgent->is66MHZCapable=MV_FALSE;
+ }
+
+ /* Read Class Code and Revision */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_CLASS_CODE_AND_REVISION_ID);
+
+
+ pPciAgent->baseClassCode =
+ (pciData & PCCRIR_BASE_CLASS_MASK) >> PCCRIR_BASE_CLASS_OFFS;
+
+ pPciAgent->subClassCode =
+ (pciData & PCCRIR_SUB_CLASS_MASK) >> PCCRIR_SUB_CLASS_OFFS;
+
+ pPciAgent->progIf =
+ (pciData & PCCRIR_PROGIF_MASK) >> PCCRIR_PROGIF_OFFS;
+
+ pPciAgent->revisionID =
+ (pciData & PCCRIR_REVID_MASK) >> PCCRIR_REVID_OFFS;
+
+ /* Read PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE);
+
+
+
+ pPciAgent->pciCacheLine=
+ (pciData & PBHTLTCLR_CACHELINE_MASK ) >> PBHTLTCLR_CACHELINE_OFFS;
+ pPciAgent->pciLatencyTimer=
+ (pciData & PBHTLTCLR_LATTIMER_MASK) >> PBHTLTCLR_LATTIMER_OFFS;
+
+ switch (pciData & PBHTLTCLR_HEADER_MASK)
+ {
+ case PBHTLTCLR_HEADER_STANDARD:
+
+ pPciAgent->pciHeader=MV_PCI_STANDARD;
+ break;
+ case PBHTLTCLR_HEADER_PCI2PCI_BRIDGE:
+
+ pPciAgent->pciHeader=MV_PCI_PCI2PCI_BRIDGE;
+ break;
+
+ }
+
+ if (pciData & PBHTLTCLR_MULTI_FUNC)
+ {
+ pPciAgent->isMultiFunction=MV_TRUE;
+ }
+ else
+ {
+ pPciAgent->isMultiFunction=MV_FALSE;
+ }
+
+ if (pciData & PBHTLTCLR_BISTCAP)
+ {
+ pPciAgent->isBISTCapable=MV_TRUE;
+ }
+ else
+ {
+ pPciAgent->isBISTCapable=MV_FALSE;
+ }
+
+
+ /* read this device pci bars */
+
+ pciDetectDeviceBars(pciIf,
+ bus,dev,func,
+ pPciAgent);
+
+
+ /* check if we are bridge*/
+ if ((pPciAgent->baseClassCode == PCI_BRIDGE_CLASS)&&
+ (pPciAgent->subClassCode == P2P_BRIDGE_SUB_CLASS_CODE))
+ {
+
+ /* Read P2P_BUSSES_NUM */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ P2P_BUSSES_NUM);
+
+ pPciAgent->p2pPrimBusNum =
+ (pciData & PBM_PRIME_BUS_NUM_MASK) >> PBM_PRIME_BUS_NUM_OFFS;
+
+ pPciAgent->p2pSecBusNum =
+ (pciData & PBM_SEC_BUS_NUM_MASK) >> PBM_SEC_BUS_NUM_OFFS;
+
+ pPciAgent->p2pSubBusNum =
+ (pciData & PBM_SUB_BUS_NUM_MASK) >> PBM_SUB_BUS_NUM_OFFS;
+
+ pPciAgent->p2pSecLatencyTimer =
+ (pciData & PBM_SEC_LAT_TMR_MASK) >> PBM_SEC_LAT_TMR_OFFS;
+
+ /* Read P2P_IO_BASE_LIMIT_SEC_STATUS */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ P2P_IO_BASE_LIMIT_SEC_STATUS);
+
+ pPciAgent->p2pSecStatus =
+ (pciData & PIBLSS_SEC_STATUS_MASK) >> PIBLSS_SEC_STATUS_OFFS;
+
+
+ pPciAgent->p2pIObase =
+ (pciData & PIBLSS_IO_BASE_MASK) << PIBLSS_IO_LIMIT_OFFS;
+
+ /* clear low address (should be zero)*/
+ pPciAgent->p2pIObase &= PIBLSS_HIGH_ADDR_MASK;
+
+ pPciAgent->p2pIOLimit =
+ (pciData & PIBLSS_IO_LIMIT_MASK);
+
+ /* fill low address with 0xfff */
+ pPciAgent->p2pIOLimit |= PIBLSS_LOW_ADDR_MASK;
+
+
+ switch ((pciData & PIBLSS_ADD_CAP_MASK) >> PIBLSS_ADD_CAP_OFFS)
+ {
+ case PIBLSS_ADD_CAP_16BIT:
+
+ pPciAgent->bIO32 = MV_FALSE;
+
+ break;
+ case PIBLSS_ADD_CAP_32BIT:
+
+ pPciAgent->bIO32 = MV_TRUE;
+
+ /* Read P2P_IO_BASE_LIMIT_UPPER_16 */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ P2P_IO_BASE_LIMIT_UPPER_16);
+
+ pPciAgent->p2pIObase |=
+ (pciData & PRBU_IO_UPP_BASE_MASK) << PRBU_IO_UPP_LIMIT_OFFS;
+
+
+ pPciAgent->p2pIOLimit |=
+ (pciData & PRBU_IO_UPP_LIMIT_MASK);
+
+ break;
+
+ }
+
+
+ /* Read P2P_MEM_BASE_LIMIT */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ P2P_MEM_BASE_LIMIT);
+
+ pPciAgent->p2pMemBase =
+ (pciData & PMBL_MEM_BASE_MASK) << PMBL_MEM_LIMIT_OFFS;
+
+ /* clear low address */
+ pPciAgent->p2pMemBase &= PMBL_HIGH_ADDR_MASK;
+
+ pPciAgent->p2pMemLimit =
+ (pciData & PMBL_MEM_LIMIT_MASK);
+
+ /* add 0xfffff */
+ pPciAgent->p2pMemLimit |= PMBL_LOW_ADDR_MASK;
+
+
+ /* Read P2P_PREF_MEM_BASE_LIMIT */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ P2P_PREF_MEM_BASE_LIMIT);
+
+
+ pPciAgent->p2pPrefMemBase =
+ (pciData & PRMBL_PREF_MEM_BASE_MASK) << PRMBL_PREF_MEM_LIMIT_OFFS;
+
+ /* get high address only */
+ pPciAgent->p2pPrefMemBase &= PRMBL_HIGH_ADDR_MASK;
+
+
+
+ pPciAgent->p2pPrefMemLimit =
+ (pciData & PRMBL_PREF_MEM_LIMIT_MASK);
+
+ /* add 0xfffff */
+ pPciAgent->p2pPrefMemLimit |= PRMBL_LOW_ADDR_MASK;
+
+ switch (pciData & PRMBL_ADD_CAP_MASK)
+ {
+ case PRMBL_ADD_CAP_32BIT:
+
+ pPciAgent->bPrefMem64 = MV_FALSE;
+
+ /* Read P2P_PREF_BASE_UPPER_32 */
+ pPciAgent->p2pPrefBaseUpper32Bits = 0;
+
+ /* Read P2P_PREF_LIMIT_UPPER_32 */
+ pPciAgent->p2pPrefLimitUpper32Bits = 0;
+
+ break;
+ case PRMBL_ADD_CAP_64BIT:
+
+ pPciAgent->bPrefMem64 = MV_TRUE;
+
+ /* Read P2P_PREF_BASE_UPPER_32 */
+ pPciAgent->p2pPrefBaseUpper32Bits = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ P2P_PREF_BASE_UPPER_32);
+
+ /* Read P2P_PREF_LIMIT_UPPER_32 */
+ pPciAgent->p2pPrefLimitUpper32Bits = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ P2P_PREF_LIMIT_UPPER_32);
+
+ break;
+
+ }
+
+ }
+ else /* no bridge */
+ {
+ /* Read PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID);
+
+
+ pPciAgent->subSysVenID =
+ (pciData & PSISVIR_VENID_MASK) >> PSISVIR_VENID_OFFS;
+ pPciAgent->subSysID =
+ (pciData & PSISVIR_DEVID_MASK) >> PSISVIR_DEVID_OFFS;
+
+
+ /* Read PCI_EXPANSION_ROM_BASE_ADDR_REG */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_EXPANSION_ROM_BASE_ADDR_REG);
+
+
+ if (pciData & PERBAR_EXPROMEN)
+ {
+ pPciAgent->isExpRom = MV_TRUE;
+ }
+ else
+ {
+ pPciAgent->isExpRom = MV_FALSE;
+ }
+
+ pPciAgent->expRomAddr =
+ (pciData & PERBAR_BASE_MASK) >> PERBAR_BASE_OFFS;
+
+ }
+
+
+ if (MV_TRUE == pPciAgent->isCapListSupport)
+ {
+ /* Read PCI_CAPABILTY_LIST_POINTER */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_CAPABILTY_LIST_POINTER);
+
+ pPciAgent->capListPointer =
+ (pciData & PCLPR_CAPPTR_MASK) >> PCLPR_CAPPTR_OFFS;
+
+ }
+
+ /* Read PCI_INTERRUPT_PIN_AND_LINE */
+ pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_INTERRUPT_PIN_AND_LINE);
+
+
+ pPciAgent->irqLine=
+ (pciData & PIPLR_INTLINE_MASK) >> PIPLR_INTLINE_OFFS;
+
+ pPciAgent->intPin=
+ (MV_PCI_INT_PIN)(pciData & PIPLR_INTPIN_MASK) >> PIPLR_INTPIN_OFFS;
+
+ pPciAgent->minGrant=
+ (pciData & PIPLR_MINGRANT_MASK) >> PIPLR_MINGRANT_OFFS;
+ pPciAgent->maxLatency=
+ (pciData & PIPLR_MAXLATEN_MASK) >> PIPLR_MAXLATEN_OFFS;
+
+ mvPciClassNameGet(pPciAgent->baseClassCode,
+ (MV_8 *)pPciAgent->type);
+
+ return MV_OK;
+
+
+}
+
+/*******************************************************************************
+* pciDetectDeviceBars - Detect a pci device bars
+*
+* DESCRIPTION:
+* This function detects all pci agent bars
+*
+* INPUT:
+* pciIf - PCI Interface
+* bus - Bus number
+* dev - Device number
+* func - Function number
+*
+*
+*
+* OUTPUT:
+* pPciAgent - pointer to the pci agent filled with its information
+*
+* RETURN:
+* detected bars number
+*
+*******************************************************************************/
+static MV_U32 pciDetectDeviceBars(MV_U32 pciIf,
+ MV_U32 bus,
+ MV_U32 dev,
+ MV_U32 func,
+ MV_PCI_DEVICE *pPciAgent)
+{
+ MV_U32 pciData,barIndex,detectedBar=0;
+ MV_U32 tmpBaseHigh=0,tmpBaseLow=0;
+ MV_U32 pciMaxBars=0;
+
+ pPciAgent->barsNum=0;
+
+ /* check if we are bridge*/
+ if ((pPciAgent->baseClassCode == PCI_BRIDGE_CLASS)&&
+ (pPciAgent->subClassCode == P2P_BRIDGE_SUB_CLASS_CODE))
+ {
+ pciMaxBars = 2;
+ }
+ else /* no bridge */
+ {
+ pciMaxBars = 6;
+ }
+
+ /* read this device pci bars */
+ for (barIndex = 0 ; barIndex < pciMaxBars ; barIndex++ )
+ {
+ /* Read PCI_MEMORY_BAR_BASE_ADDR */
+ tmpBaseLow = pciData = mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex));
+
+ pPciAgent->pciBar[detectedBar].barOffset =
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex);
+
+ /* check if the bar is 32bit or 64bit bar */
+ switch (pciData & PBBLR_TYPE_MASK)
+ {
+ case PBBLR_TYPE_32BIT_ADDR:
+ pPciAgent->pciBar[detectedBar].barType = PCI_32BIT_BAR;
+ break;
+ case PBBLR_TYPE_64BIT_ADDR:
+ pPciAgent->pciBar[detectedBar].barType = PCI_64BIT_BAR;
+ break;
+
+ }
+
+ /* check if it is memory or IO bar */
+ if (pciData & PBBLR_IOSPACE)
+ {
+ pPciAgent->pciBar[detectedBar].barMapping=PCI_IO_BAR;
+ }
+ else
+ {
+ pPciAgent->pciBar[detectedBar].barMapping=PCI_MEMORY_BAR;
+ }
+
+ /* if it is memory bar then check if it is prefetchable */
+ if (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping)
+ {
+ if (pciData & PBBLR_PREFETCH_EN)
+ {
+ pPciAgent->pciBar[detectedBar].isPrefetchable = MV_TRUE;
+ }
+ else
+ {
+ pPciAgent->pciBar[detectedBar].isPrefetchable = MV_FALSE;
+ }
+
+ pPciAgent->pciBar[detectedBar].barBaseLow =
+ pciData & PBBLR_MEM_BASE_MASK;
+
+
+ }
+ else /* IO Bar */
+ {
+ pPciAgent->pciBar[detectedBar].barBaseLow =
+ pciData & PBBLR_IO_BASE_MASK;
+
+ }
+
+ pPciAgent->pciBar[detectedBar].barBaseHigh=0;
+
+ if (PCI_64BIT_BAR == pPciAgent->pciBar[detectedBar].barType)
+ {
+ barIndex++;
+
+ tmpBaseHigh = pPciAgent->pciBar[detectedBar].barBaseHigh =
+ mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex));
+
+
+ }
+
+ /* calculating full base address (64bit) */
+ pPciAgent->pciBar[detectedBar].barBaseAddr =
+ (MV_U64)pPciAgent->pciBar[detectedBar].barBaseHigh;
+
+ pPciAgent->pciBar[detectedBar].barBaseAddr <<= 32;
+
+ pPciAgent->pciBar[detectedBar].barBaseAddr |=
+ (MV_U64)pPciAgent->pciBar[detectedBar].barBaseLow;
+
+
+
+ /* get the sizes of the the bar */
+
+ pPciAgent->pciBar[detectedBar].barSizeHigh=0;
+
+ if ((PCI_64BIT_BAR == pPciAgent->pciBar[detectedBar].barType) &&
+ (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping))
+
+ {
+ /* write oxffffffff to the bar to get the size */
+ /* start with sizelow ( original value was saved in tmpBaseLow ) */
+ mvPciIfConfigWrite(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex-1),
+ 0xffffffff);
+
+ /* read size */
+ pPciAgent->pciBar[detectedBar].barSizeLow =
+ mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex-1));
+
+
+
+ /* restore original value */
+ mvPciIfConfigWrite(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex-1),
+ tmpBaseLow);
+
+
+ /* now do the same for BaseHigh */
+
+ /* write oxffffffff to the bar to get the size */
+ mvPciIfConfigWrite(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex),
+ 0xffffffff);
+
+ /* read size */
+ pPciAgent->pciBar[detectedBar].barSizeHigh =
+ mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex));
+
+ /* restore original value */
+ mvPciIfConfigWrite(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex),
+ tmpBaseHigh);
+
+ if ((0 == pPciAgent->pciBar[detectedBar].barSizeLow)&&
+ (0 == pPciAgent->pciBar[detectedBar].barSizeHigh))
+ {
+ /* this bar is not applicable for this device,
+ ignore all previous settings and check the next bar*/
+
+ /* we though this was a 64bit bar , and it seems this
+ was wrong ! so decrement barIndex */
+ barIndex--;
+ continue;
+ }
+
+ /* calculate the full 64 bit size */
+
+ if (0 != pPciAgent->pciBar[detectedBar].barSizeHigh)
+ {
+ pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK;
+
+ pPciAgent->pciBar[detectedBar].barSizeLow =
+ ~pPciAgent->pciBar[detectedBar].barSizeLow + 1;
+
+ pPciAgent->pciBar[detectedBar].barSizeHigh = 0;
+
+ }
+ else
+ {
+
+ pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK;
+
+ pPciAgent->pciBar[detectedBar].barSizeLow =
+ ~pPciAgent->pciBar[detectedBar].barSizeLow + 1;
+
+ pPciAgent->pciBar[detectedBar].barSizeHigh = 0;
+
+ }
+
+
+
+ }
+ else /* 32bit bar */
+ {
+ /* write oxffffffff to the bar to get the size */
+ mvPciIfConfigWrite(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex),
+ 0xffffffff);
+
+ /* read size */
+ pPciAgent->pciBar[detectedBar].barSizeLow =
+ mvPciIfConfigRead(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex));
+
+ if (0 == pPciAgent->pciBar[detectedBar].barSizeLow)
+ {
+ /* this bar is not applicable for this device,
+ ignore all previous settings and check the next bar*/
+ continue;
+ }
+
+
+ /* restore original value */
+ mvPciIfConfigWrite(pciIf,
+ bus,dev,func,
+ PCI_MEMORY_BAR_BASE_ADDR(barIndex),
+ tmpBaseLow);
+
+ /* calculate size low */
+
+ if (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping)
+ {
+ pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK;
+ }
+ else
+ {
+ pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_IO_BASE_MASK;
+ }
+
+ pPciAgent->pciBar[detectedBar].barSizeLow =
+ ~pPciAgent->pciBar[detectedBar].barSizeLow + 1;
+
+ pPciAgent->pciBar[detectedBar].barSizeHigh = 0;
+ pPciAgent->pciBar[detectedBar].barSize =
+ (MV_U64)pPciAgent->pciBar[detectedBar].barSizeLow;
+
+
+ }
+
+ /* we are here ! this means we have already detected a bar for
+ this device , now move on */
+
+ detectedBar++;
+ pPciAgent->barsNum++;
+ }
+
+ return detectedBar;
+}
+
+
+/*******************************************************************************
+* mvPciClassNameGet - get PCI class name
+*
+* DESCRIPTION:
+* This function returns the PCI class name
+*
+* INPUT:
+* baseClassCode - Base Class Code.
+*
+* OUTPUT:
+* pType - the class name
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciClassNameGet(MV_U32 baseClassCode, MV_8 *pType)
+{
+
+ switch(baseClassCode)
+ {
+ case 0x0:
+ strcpy(pType,"Old generation device");
+ break;
+ case 0x1:
+ strcpy(pType,"Mass storage controller");
+ break;
+ case 0x2:
+ strcpy(pType,"Network controller");
+ break;
+ case 0x3:
+ strcpy(pType,"Display controller");
+ break;
+ case 0x4:
+ strcpy(pType,"Multimedia device");
+ break;
+ case 0x5:
+ strcpy(pType,"Memory controller");
+ break;
+ case 0x6:
+ strcpy(pType,"Bridge Device");
+ break;
+ case 0x7:
+ strcpy(pType,"Simple Communication controllers");
+ break;
+ case 0x8:
+ strcpy(pType,"Base system peripherals");
+ break;
+ case 0x9:
+ strcpy(pType,"Input Devices");
+ break;
+ case 0xa:
+ strcpy(pType,"Docking stations");
+ break;
+ case 0xb:
+ strcpy(pType,"Processors");
+ break;
+ case 0xc:
+ strcpy(pType,"Serial bus controllers");
+ break;
+ case 0xd:
+ strcpy(pType,"Wireless controllers");
+ break;
+ case 0xe:
+ strcpy(pType,"Intelligent I/O controllers");
+ break;
+ case 0xf:
+ strcpy(pType,"Satellite communication controllers");
+ break;
+ case 0x10:
+ strcpy(pType,"Encryption/Decryption controllers");
+ break;
+ case 0x11:
+ strcpy(pType,"Data acquisition and signal processing controllers");
+ break;
+ default:
+ strcpy(pType,"Unknown device");
+ break;
+ }
+
+ return MV_OK;
+
+}
+
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvPciUtilsh
+#define __INCmvPciUtilsh
+
+/*
+This module only support scanning of Header type 00h of pci devices
+There is no suppotr for Header type 01h of pci devices ( PCI bridges )
+*/
+
+/* includes */
+#include "mvSysHwConfig.h"
+#include "pci-if/mvPciIf.h"
+#include "pci/mvPciRegs.h"
+
+
+
+/* PCI base address low bar mask */
+#define PCI_ERROR_CODE 0xffffffff
+
+#define PCI_BRIDGE_CLASS 0x6
+#define P2P_BRIDGE_SUB_CLASS_CODE 0x4
+
+
+#define P2P_BUSSES_NUM 0x18
+#define P2P_IO_BASE_LIMIT_SEC_STATUS 0x1C
+#define P2P_MEM_BASE_LIMIT 0x20
+#define P2P_PREF_MEM_BASE_LIMIT 0x24
+#define P2P_PREF_BASE_UPPER_32 0x28
+#define P2P_PREF_LIMIT_UPPER_32 0x2C
+#define P2P_IO_BASE_LIMIT_UPPER_16 0x30
+#define P2P_EXP_ROM 0x38
+
+/* P2P_BUSSES_NUM (PBM) */
+
+#define PBM_PRIME_BUS_NUM_OFFS 0
+#define PBM_PRIME_BUS_NUM_MASK (0xff << PBM_PRIME_BUS_NUM_OFFS)
+
+#define PBM_SEC_BUS_NUM_OFFS 8
+#define PBM_SEC_BUS_NUM_MASK (0xff << PBM_SEC_BUS_NUM_OFFS)
+
+#define PBM_SUB_BUS_NUM_OFFS 16
+#define PBM_SUB_BUS_NUM_MASK (0xff << PBM_SUB_BUS_NUM_OFFS)
+
+#define PBM_SEC_LAT_TMR_OFFS 24
+#define PBM_SEC_LAT_TMR_MASK (0xff << PBM_SEC_LAT_TMR_OFFS)
+
+/* P2P_IO_BASE_LIMIT_SEC_STATUS (PIBLSS) */
+
+#define PIBLSS_IO_BASE_OFFS 0
+#define PIBLSS_IO_BASE_MASK (0xff << PIBLSS_IO_BASE_OFFS)
+
+#define PIBLSS_ADD_CAP_OFFS 0
+#define PIBLSS_ADD_CAP_MASK (0x3 << PIBLSS_ADD_CAP_OFFS)
+#define PIBLSS_ADD_CAP_16BIT (0x0 << PIBLSS_ADD_CAP_OFFS)
+#define PIBLSS_ADD_CAP_32BIT (0x1 << PIBLSS_ADD_CAP_OFFS)
+
+#define PIBLSS_LOW_ADDR_OFFS 0
+#define PIBLSS_LOW_ADDR_MASK (0xFFF << PIBLSS_LOW_ADDR_OFFS)
+
+#define PIBLSS_HIGH_ADDR_OFFS 12
+#define PIBLSS_HIGH_ADDR_MASK (0xF << PIBLSS_HIGH_ADDR_OFFS)
+
+#define PIBLSS_IO_LIMIT_OFFS 8
+#define PIBLSS_IO_LIMIT_MASK (0xff << PIBLSS_IO_LIMIT_OFFS)
+
+#define PIBLSS_SEC_STATUS_OFFS 16
+#define PIBLSS_SEC_STATUS_MASK (0xffff << PIBLSS_SEC_STATUS_OFFS)
+
+
+/* P2P_MEM_BASE_LIMIT (PMBL)*/
+
+#define PMBL_MEM_BASE_OFFS 0
+#define PMBL_MEM_BASE_MASK (0xffff << PMBL_MEM_BASE_OFFS)
+
+#define PMBL_MEM_LIMIT_OFFS 16
+#define PMBL_MEM_LIMIT_MASK (0xffff << PMBL_MEM_LIMIT_OFFS)
+
+
+#define PMBL_LOW_ADDR_OFFS 0
+#define PMBL_LOW_ADDR_MASK (0xFFFFF << PMBL_LOW_ADDR_OFFS)
+
+#define PMBL_HIGH_ADDR_OFFS 20
+#define PMBL_HIGH_ADDR_MASK (0xFFF << PMBL_HIGH_ADDR_OFFS)
+
+
+/* P2P_PREF_MEM_BASE_LIMIT (PRMBL) */
+
+#define PRMBL_PREF_MEM_BASE_OFFS 0
+#define PRMBL_PREF_MEM_BASE_MASK (0xffff << PRMBL_PREF_MEM_BASE_OFFS)
+
+#define PRMBL_PREF_MEM_LIMIT_OFFS 16
+#define PRMBL_PREF_MEM_LIMIT_MASK (0xffff<<PRMBL_PREF_MEM_LIMIT_OFFS)
+
+#define PRMBL_LOW_ADDR_OFFS 0
+#define PRMBL_LOW_ADDR_MASK (0xFFFFF << PRMBL_LOW_ADDR_OFFS)
+
+#define PRMBL_HIGH_ADDR_OFFS 20
+#define PRMBL_HIGH_ADDR_MASK (0xFFF << PRMBL_HIGH_ADDR_OFFS)
+
+#define PRMBL_ADD_CAP_OFFS 0
+#define PRMBL_ADD_CAP_MASK (0xf << PRMBL_ADD_CAP_OFFS)
+#define PRMBL_ADD_CAP_32BIT (0x0 << PRMBL_ADD_CAP_OFFS)
+#define PRMBL_ADD_CAP_64BIT (0x1 << PRMBL_ADD_CAP_OFFS)
+
+/* P2P_IO_BASE_LIMIT_UPPER_16 (PIBLU) */
+
+#define PRBU_IO_UPP_BASE_OFFS 0
+#define PRBU_IO_UPP_BASE_MASK (0xffff << PRBU_IO_UPP_BASE_OFFS)
+
+#define PRBU_IO_UPP_LIMIT_OFFS 16
+#define PRBU_IO_UPP_LIMIT_MASK (0xffff << PRBU_IO_UPP_LIMIT_OFFS)
+
+
+/* typedefs */
+
+typedef enum _mvPciBarMapping
+{
+ PCI_MEMORY_BAR,
+ PCI_IO_BAR,
+ PCI_NO_MAPPING
+}MV_PCI_BAR_MAPPING;
+
+typedef enum _mvPciBarType
+{
+ PCI_32BIT_BAR,
+ PCI_64BIT_BAR
+}MV_PCI_BAR_TYPE;
+
+typedef enum _mvPciIntPin
+{
+ MV_PCI_INTA = 1,
+ MV_PCI_INTB = 2,
+ MV_PCI_INTC = 3,
+ MV_PCI_INTD = 4
+}MV_PCI_INT_PIN;
+
+typedef enum _mvPciHeader
+{
+ MV_PCI_STANDARD,
+ MV_PCI_PCI2PCI_BRIDGE
+
+}MV_PCI_HEADER;
+
+
+/* BAR structure */
+typedef struct _pciBar
+{
+ MV_U32 barOffset;
+ MV_U32 barBaseLow;
+ MV_U32 barBaseHigh;
+ MV_U32 barSizeLow;
+ MV_U32 barSizeHigh;
+ /* The 'barBaseAddr' is a 64-bit variable
+ that will contain the TOTAL base address
+ value achived by combining both the 'barBaseLow'
+ and the 'barBaseHigh' parameters as follows:
+
+ BIT: 63 31 0
+ | | |
+ barBaseHigh barBaseLow */
+ MV_U64 barBaseAddr;
+ /* The 'barSize' is a 64-bit variable
+ that will contain the TOTAL size achived
+ by combining both the 'barSizeLow' and
+ the 'barSizeHigh' parameters as follows:
+
+ BIT: 63 31 0
+ | | |
+ barSizeHigh barSizeLow
+
+ NOTE: The total size described above
+ is AFTER the size calculation as
+ described in PCI spec rev2.2 */
+ MV_U64 barSize;
+ MV_BOOL isPrefetchable;
+ MV_PCI_BAR_TYPE barType;
+ MV_PCI_BAR_MAPPING barMapping;
+
+
+} PCI_BAR;
+
+/* Device information structure */
+typedef struct _mvPciDevice
+{
+ /* Device specific information */
+ MV_U32 busNumber; /* Pci agent bus number */
+ MV_U32 deviceNum; /* Pci agent device number */
+ MV_U32 function; /* Pci agent function number */
+
+ MV_U32 venID; /* Pci agent Vendor ID */
+ MV_U32 deviceID; /* Pci agent Device ID */
+
+ MV_BOOL isFastB2BCapable; /* Capability of Fast Back to Back
+ transactions */
+ MV_BOOL isCapListSupport; /* Support of Capability list */
+ MV_BOOL is66MHZCapable; /* 66MHZ support */
+
+ MV_U32 baseClassCode; /* Pci agent base Class Code */
+ MV_U32 subClassCode; /* Pci agent sub Class Code */
+ MV_U32 progIf; /* Pci agent Programing interface */
+ MV_U32 revisionID;
+
+ PCI_BAR pciBar[6]; /* Pci agent bar list */
+
+ MV_U32 p2pPrimBusNum; /* P2P Primary Bus number*/
+ MV_U32 p2pSecBusNum; /* P2P Secondary Bus Number*/
+ MV_U32 p2pSubBusNum; /* P2P Subordinate bus Number */
+ MV_U32 p2pSecLatencyTimer; /* P2P Econdary Latency Timer*/
+ MV_U32 p2pIObase; /* P2P IO Base */
+ MV_U32 p2pIOLimit; /* P2P IO Linit */
+ MV_BOOL bIO32;
+ MV_U32 p2pSecStatus; /* P2P Secondary Status */
+ MV_U32 p2pMemBase; /* P2P Memory Space */
+ MV_U32 p2pMemLimit; /* P2P Memory Limit*/
+ MV_U32 p2pPrefMemBase; /* P2P Prefetchable Mem Base*/
+ MV_U32 p2pPrefMemLimit; /* P2P Prefetchable Memory Limit*/
+ MV_BOOL bPrefMem64;
+ MV_U32 p2pPrefBaseUpper32Bits;/* P2P Prefetchable upper 32 bits*/
+ MV_U32 p2pPrefLimitUpper32Bits;/* P2P prefetchable limit upper 32*/
+
+
+ MV_U32 pciCacheLine; /* Pci agent cache line */
+ MV_U32 pciLatencyTimer; /* Pci agent Latency timer */
+ MV_PCI_HEADER pciHeader; /* Pci agent header type*/
+ MV_BOOL isMultiFunction; /* Multi function support */
+ MV_BOOL isBISTCapable; /* Self test capable */
+
+ MV_U32 subSysID; /* Sub System ID */
+ MV_U32 subSysVenID; /* Sub System Vendor ID */
+
+ MV_BOOL isExpRom; /* Expantion Rom support */
+ MV_U32 expRomAddr; /* Expantion Rom pointer */
+
+ MV_U32 capListPointer; /* Capability list pointer */
+
+ MV_U32 irqLine; /* IRQ line */
+ MV_PCI_INT_PIN intPin; /* Interrupt pin */
+ MV_U32 minGrant; /* Minimum grant*/
+ MV_U32 maxLatency; /* Maximum latency*/
+
+ MV_U32 funtionsNum; /* pci agent total functions number */
+
+ MV_U32 barsNum;
+ MV_U8 type[60]; /* class name of the pci agent */
+
+
+} MV_PCI_DEVICE;
+
+/* PCI gloabl functions */
+MV_STATUS mvPciClassNameGet(MV_U32 classCode, MV_8 *pType);
+
+
+/* Performs a full scan on both PCIs and returns all possible details on the
+ agents found on the bus. */
+MV_STATUS mvPciScan(MV_U32 pciIf,
+ MV_PCI_DEVICE *pPciAgents,
+ MV_U32 *pPciAgentsNum);
+
+
+#endif /* #ifndef __INCmvPciUtilsh */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#include "pci/mvPci.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+
+
+MV_VOID mvPciHalInit(MV_U32 pciIf, MV_PCI_MOD pciIfmod)
+{
+ if (MV_PCI_MOD_HOST == pciIfmod)
+ {
+
+ mvPciLocalBusNumSet(pciIf, PCI_HOST_BUS_NUM(pciIf));
+ mvPciLocalDevNumSet(pciIf, PCI_HOST_DEV_NUM(pciIf));
+
+ /* Local device master Enable */
+ mvPciMasterEnable(pciIf, MV_TRUE);
+
+ /* Local device slave Enable */
+ mvPciSlaveEnable(pciIf, mvPciLocalBusNumGet(pciIf),
+ mvPciLocalDevNumGet(pciIf), MV_TRUE);
+ }
+ /* enable CPU-2-PCI ordering */
+ MV_REG_BIT_SET(PCI_CMD_REG(0), PCR_CPU_TO_PCI_ORDER_EN);
+}
+
+/*******************************************************************************
+* mvPciCommandSet - Set PCI comman register value.
+*
+* DESCRIPTION:
+* This function sets a given PCI interface with its command register
+* value.
+*
+* INPUT:
+* pciIf - PCI interface number.
+* command - 32bit value to be written to comamnd register.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM if pciIf is not in range otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciCommandSet(MV_U32 pciIf, MV_U32 command)
+{
+ MV_U32 locBusNum, locDevNum, regVal;
+
+ locBusNum = mvPciLocalBusNumGet(pciIf);
+ locDevNum = mvPciLocalDevNumGet(pciIf);
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciCommandSet: ERR. Invalid PCI IF num %d\n", pciIf);
+ return MV_BAD_PARAM;
+ }
+
+ /* Set command register */
+ MV_REG_WRITE(PCI_CMD_REG(pciIf), command);
+
+ /* Upodate device max outstanding split tarnsaction */
+ if ((command & PCR_CPU_TO_PCI_ORDER_EN) &&
+ (command & PCR_PCI_TO_CPU_ORDER_EN))
+ {
+ /* Read PCI-X command register */
+ regVal = mvPciConfigRead (pciIf, locBusNum, locDevNum, 0, PCIX_COMMAND);
+
+ /* clear bits 22:20 */
+ regVal &= 0xff8fffff;
+
+ /* set reset value */
+ regVal |= (0x3 << 20);
+
+ /* Write back the value */
+ mvPciConfigWrite (pciIf, locBusNum, locDevNum, 0, PCIX_COMMAND, regVal);
+ }
+
+ return MV_OK;
+
+
+}
+
+
+/*******************************************************************************
+* mvPciModeGet - Get PCI interface mode.
+*
+* DESCRIPTION:
+* This function returns the given PCI interface mode.
+*
+* INPUT:
+* pciIf - PCI interface number.
+*
+* OUTPUT:
+* pPciMode - Pointer to PCI mode structure.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode)
+{
+ MV_U32 pciMode;
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciModeGet: ERR. Invalid PCI interface %d\n", pciIf);
+ return MV_BAD_PARAM;
+ }
+ if (NULL == pPciMode)
+ {
+ mvOsPrintf("mvPciModeGet: ERR. pPciMode = NULL \n");
+ return MV_BAD_PARAM;
+ }
+
+ /* Read pci mode register */
+ pciMode = MV_REG_READ(PCI_MODE_REG(pciIf));
+
+ switch (pciMode & PMR_PCI_MODE_MASK)
+ {
+ case PMR_PCI_MODE_CONV:
+ pPciMode->pciType = MV_PCI_CONV;
+
+ if (MV_REG_READ(PCI_DLL_CTRL_REG(pciIf)) & PDC_DLL_EN)
+ {
+ pPciMode->pciSpeed = 66000000; /* 66MHZ */
+ }
+ else
+ {
+ pPciMode->pciSpeed = 33000000; /* 33MHZ */
+ }
+
+ break;
+
+ case PMR_PCI_MODE_PCIX_66MHZ:
+ pPciMode->pciType = MV_PCIX;
+ pPciMode->pciSpeed = 66000000; /* 66MHZ */
+ break;
+
+ case PMR_PCI_MODE_PCIX_100MHZ:
+ pPciMode->pciType = MV_PCIX;
+ pPciMode->pciSpeed = 100000000; /* 100MHZ */
+ break;
+
+ case PMR_PCI_MODE_PCIX_133MHZ:
+ pPciMode->pciType = MV_PCIX;
+ pPciMode->pciSpeed = 133000000; /* 133MHZ */
+ break;
+
+ default:
+ {
+ mvOsPrintf("mvPciModeGet: ERR. Non existing mode !!\n");
+ return MV_ERROR;
+ }
+ }
+
+ switch (pciMode & PMR_PCI_64_MASK)
+ {
+ case PMR_PCI_64_64BIT:
+ pPciMode->pciWidth = MV_PCI_64;
+ break;
+
+ case PMR_PCI_64_32BIT:
+ pPciMode->pciWidth = MV_PCI_32;
+ break;
+
+ default:
+ {
+ mvOsPrintf("mvPciModeGet: ERR. Non existing mode !!\n");
+ return MV_ERROR;
+ }
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvPciRetrySet - Set PCI retry counters
+*
+* DESCRIPTION:
+* This function specifies the number of times the PCI controller
+* retries a transaction before it quits.
+* Applies to the PCI Master when acting as a requester.
+* Applies to the PCI slave when acting as a completer (PCI-X mode).
+* A 0x00 value means a "retry forever".
+*
+* INPUT:
+* pciIf - PCI interface number.
+* counter - Number of times PCI controller retry. Use counter value
+* up to PRR_RETRY_CNTR_MAX.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter)
+{
+ MV_U32 pciRetry;
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciRetrySet: ERR. Invalid PCI interface %d\n", pciIf);
+ return MV_BAD_PARAM;
+ }
+
+ if (counter >= PRR_RETRY_CNTR_MAX)
+ {
+ mvOsPrintf("mvPciRetrySet: ERR. Invalid counter: %d\n", counter);
+ return MV_BAD_PARAM;
+
+ }
+
+ /* Reading PCI retry register */
+ pciRetry = MV_REG_READ(PCI_RETRY_REG(pciIf));
+
+ pciRetry &= ~PRR_RETRY_CNTR_MASK;
+
+ pciRetry |= (counter << PRR_RETRY_CNTR_OFFS);
+
+ /* write new value */
+ MV_REG_WRITE(PCI_RETRY_REG(pciIf), pciRetry);
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPciDiscardTimerSet - Set PCI discard timer
+*
+* DESCRIPTION:
+* This function set PCI discard timer.
+* In conventional PCI mode:
+* Specifies the number of PCLK cycles the PCI slave keeps a non-accessed
+* read buffers (non-completed delayed read) before invalidate the buffer.
+* Set to '0' to disable the timer. The PCI slave waits for delayed
+* read completion forever.
+* In PCI-X mode:
+* Specifies the number of PCLK cycles the PCI master waits for split
+* completion transaction, before it invalidates the pre-allocated read
+* buffer.
+* Set to '0' to disable the timer. The PCI master waits for split
+* completion forever.
+* NOTE: Must be set to a number greater than MV_PCI_MAX_DISCARD_CLK,
+* unless using the "wait for ever" setting 0x0.
+* NOTE: Must not be updated while there are pending read requests.
+*
+* INPUT:
+* pciIf - PCI interface number.
+* pClkCycles - Number of PCI clock cycles.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles)
+{
+ MV_U32 pciDiscardTimer;
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciDiscardTimerSet: ERR. Invalid PCI interface %d\n",
+ pciIf);
+ return MV_BAD_PARAM;
+ }
+
+ if (pClkCycles >= PDTR_TIMER_MIN)
+ {
+ mvOsPrintf("mvPciDiscardTimerSet: ERR. Invalid Clk value: %d\n",
+ pClkCycles);
+ return MV_BAD_PARAM;
+
+ }
+
+ /* Read PCI Discard Timer */
+ pciDiscardTimer = MV_REG_READ(PCI_DISCARD_TIMER_REG(pciIf));
+
+ pciDiscardTimer &= ~PDTR_TIMER_MASK;
+
+ pciDiscardTimer |= (pClkCycles << PDTR_TIMER_OFFS);
+
+ /* Write new value */
+ MV_REG_WRITE(PCI_DISCARD_TIMER_REG(pciIf), pciDiscardTimer);
+
+ return MV_OK;
+
+}
+
+/* PCI Arbiter routines */
+
+/*******************************************************************************
+* mvPciArbEnable - PCI arbiter enable/disable
+*
+* DESCRIPTION:
+* This fuction enable/disables a given PCI interface arbiter.
+* NOTE: Arbiter setting can not be changed while in work. It should only
+* be set once.
+* INPUT:
+* pciIf - PCI interface number.
+* enable - Enable/disable parameter. If enable = MV_TRUE then enable.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable)
+{
+ MV_U32 regVal;
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciArbEnable: ERR. Invalid PCI interface %d\n", pciIf);
+ return MV_ERROR;
+ }
+
+ /* Set PCI Arbiter Control register according to default configuration */
+ regVal = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf));
+
+ /* Make sure arbiter disabled before changing its values */
+ MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE);
+
+ regVal &= ~PCI_ARBITER_CTRL_DEFAULT_MASK;
+
+ regVal |= PCI_ARBITER_CTRL_DEFAULT; /* Set default configuration */
+
+ if (MV_TRUE == enable)
+ {
+ regVal |= PACR_ARB_ENABLE;
+ }
+ else
+ {
+ regVal &= ~PACR_ARB_ENABLE;
+ }
+
+ /* Write to register */
+ MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), regVal);
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPciArbParkDis - Disable arbiter parking on agent
+*
+* DESCRIPTION:
+* This function disables the PCI arbiter from parking on the given agent
+* list.
+*
+* INPUT:
+* pciIf - PCI interface number.
+* pciAgentMask - When a bit in the mask is set to '1', parking on
+* the associated PCI master is disabled. Mask bit
+* refers to bit 0 - 6. For example disable parking on PCI
+* agent 3 set pciAgentMask 0x4 (bit 3 is set).
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask)
+{
+ MV_U32 pciArbiterCtrl;
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciArbParkDis: ERR. Invalid PCI interface %d\n", pciIf);
+ return MV_ERROR;
+ }
+
+ /* Reading Arbiter Control register */
+ pciArbiterCtrl = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf));
+
+ /* Arbiter must be disabled before changing parking */
+ MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE);
+
+ /* do the change */
+ pciArbiterCtrl &= ~PACR_PARK_DIS_MASK;
+ pciArbiterCtrl |= (pciAgentMask << PACR_PARK_DIS_OFFS);
+
+ /* writing new value ( if th earbiter was enabled before the change */
+ /* here it will be reenabled */
+ MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), pciArbiterCtrl);
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPciArbBrokDetectSet - Set PCI arbiter broken detection
+*
+* DESCRIPTION:
+* This function sets the maximum number of cycles that the arbiter
+* waits for a PCI master to respond to its grant assertion. If a
+* PCI agent fails to respond within this time, the PCI arbiter aborts
+* the transaction and performs a new arbitration cycle.
+* NOTE: Value must be greater than '1' for conventional PCI and
+* greater than '5' for PCI-X.
+*
+* INPUT:
+* pciIf - PCI interface number.
+* pClkCycles - Number of PCI clock cycles. If equal to '0' the broken
+* master detection is disabled.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles)
+{
+ MV_U32 pciArbiterCtrl;
+ MV_U32 pciMode;
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciArbBrokDetectSet: ERR. Invalid PCI interface %d\n",
+ pciIf);
+ return MV_BAD_PARAM;
+ }
+
+ /* Checking PCI mode and if pClkCycles is legal value */
+ pciMode = MV_REG_READ(PCI_MODE_REG(pciIf));
+ pciMode &= PMR_PCI_MODE_MASK;
+
+ if (PMR_PCI_MODE_CONV == pciMode)
+ {
+ if (pClkCycles < PACR_BROKEN_VAL_CONV_MIN)
+ return MV_ERROR;
+ }
+ else
+ {
+ if (pClkCycles < PACR_BROKEN_VAL_PCIX_MIN)
+ return MV_ERROR;
+ }
+
+ pClkCycles <<= PACR_BROKEN_VAL_OFFS;
+
+ /* Reading Arbiter Control register */
+ pciArbiterCtrl = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf));
+ pciArbiterCtrl &= ~PACR_BROKEN_VAL_MASK;
+ pciArbiterCtrl |= pClkCycles;
+
+ /* Arbiter must be disabled before changing broken detection */
+ MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE);
+
+ /* writing new value ( if th earbiter was enabled before the change */
+ /* here it will be reenabled */
+
+ MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), pciArbiterCtrl);
+
+ return MV_OK;
+}
+
+/* PCI configuration space read write */
+
+/*******************************************************************************
+* mvPciConfigRead - Read from configuration space
+*
+* DESCRIPTION:
+* This function performs a 32 bit read from PCI configuration space.
+* It supports both type 0 and type 1 of Configuration Transactions
+* (local and over bridge). In order to read from local bus segment, use
+* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers
+* will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+* pciIf - PCI interface number.
+* bus - PCI segment bus number.
+* dev - PCI device number.
+* func - Function number.
+* regOffs - Register offset.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit register data, 0xffffffff on error
+*
+*******************************************************************************/
+MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_U32 func,
+ MV_U32 regOff)
+{
+ MV_U32 pciData = 0;
+
+ /* Parameter checking */
+ if (PCI_DEFAULT_IF != pciIf)
+ {
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciConfigRead: ERR. Invalid PCI interface %d\n",pciIf);
+ return 0xFFFFFFFF;
+ }
+ }
+
+ if (dev >= MAX_PCI_DEVICES)
+ {
+ DB(mvOsPrintf("mvPciConfigRead: ERR. device number illigal %d\n", dev));
+ return 0xFFFFFFFF;
+ }
+
+ if (func >= MAX_PCI_FUNCS)
+ {
+ DB(mvOsPrintf("mvPciConfigRead: ERR. function number illigal %d\n", func));
+ return 0xFFFFFFFF;
+ }
+
+ if (bus >= MAX_PCI_BUSSES)
+ {
+ DB(mvOsPrintf("mvPciConfigRead: ERR. bus number illigal %d\n", bus));
+ return MV_ERROR;
+ }
+
+
+ /* Creating PCI address to be passed */
+ pciData |= (bus << PCAR_BUS_NUM_OFFS);
+ pciData |= (dev << PCAR_DEVICE_NUM_OFFS);
+ pciData |= (func << PCAR_FUNC_NUM_OFFS);
+ pciData |= (regOff & PCAR_REG_NUM_MASK);
+
+ pciData |= PCAR_CONFIG_EN;
+
+ /* Write the address to the PCI configuration address register */
+ MV_REG_WRITE(PCI_CONFIG_ADDR_REG(pciIf), pciData);
+
+ /* In order to let the PCI controller absorbed the address of the read */
+ /* transaction we perform a validity check that the address was written */
+ if(pciData != MV_REG_READ(PCI_CONFIG_ADDR_REG(pciIf)))
+ {
+ return MV_ERROR;
+ }
+ /* Read the Data returned in the PCI Data register */
+ pciData = MV_REG_READ(PCI_CONFIG_DATA_REG(pciIf));
+
+ return pciData;
+}
+
+/*******************************************************************************
+* mvPciConfigWrite - Write to configuration space
+*
+* DESCRIPTION:
+* This function performs a 32 bit write to PCI configuration space.
+* It supports both type 0 and type 1 of Configuration Transactions
+* (local and over bridge). In order to write to local bus segment, use
+* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers
+* will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+* pciIf - PCI interface number.
+* bus - PCI segment bus number.
+* dev - PCI device number.
+* func - Function number.
+* regOffs - Register offset.
+* data - 32bit data.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data)
+{
+ MV_U32 pciData = 0;
+
+ /* Parameter checking */
+ if (PCI_DEFAULT_IF != pciIf)
+ {
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciConfigWrite: ERR. Invalid PCI interface %d\n",
+ pciIf);
+ return 0xFFFFFFFF;
+ }
+ }
+
+ if (dev >= MAX_PCI_DEVICES)
+ {
+ mvOsPrintf("mvPciConfigWrite: ERR. device number illigal %d\n",dev);
+ return MV_BAD_PARAM;
+ }
+
+ if (func >= MAX_PCI_FUNCS)
+ {
+ mvOsPrintf("mvPciConfigWrite: ERR. function number illigal %d\n", func);
+ return MV_ERROR;
+ }
+
+ if (bus >= MAX_PCI_BUSSES)
+ {
+ mvOsPrintf("mvPciConfigWrite: ERR. bus number illigal %d\n", bus);
+ return MV_ERROR;
+ }
+
+ /* Creating PCI address to be passed */
+ pciData |= (bus << PCAR_BUS_NUM_OFFS);
+ pciData |= (dev << PCAR_DEVICE_NUM_OFFS);
+ pciData |= (func << PCAR_FUNC_NUM_OFFS);
+ pciData |= (regOff & PCAR_REG_NUM_MASK);
+
+ pciData |= PCAR_CONFIG_EN;
+
+ /* Write the address to the PCI configuration address register */
+ MV_REG_WRITE(PCI_CONFIG_ADDR_REG(pciIf), pciData);
+
+ /* In order to let the PCI controller absorbed the address of the read */
+ /* transaction we perform a validity check that the address was written */
+ if(pciData != MV_REG_READ(PCI_CONFIG_ADDR_REG(pciIf)))
+ {
+ return MV_ERROR;
+ }
+
+ /* Write the Data passed to the PCI Data register */
+ MV_REG_WRITE(PCI_CONFIG_DATA_REG(pciIf), data);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvPciMasterEnable - Enable/disale PCI interface master transactions.
+*
+* DESCRIPTION:
+* This function performs read modified write to PCI command status
+* (offset 0x4) to set/reset bit 2. After this bit is set, the PCI
+* master is allowed to gain ownership on the bus, otherwise it is
+* incapable to do so.
+*
+* INPUT:
+* pciIf - PCI interface number.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable)
+{
+ MV_U32 pciCommandStatus;
+ MV_U32 RegOffs;
+ MV_U32 localBus;
+ MV_U32 localDev;
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciMasterEnable: ERR. Invalid PCI interface %d\n", pciIf);
+ return MV_ERROR;
+ }
+
+ localBus = mvPciLocalBusNumGet(pciIf);
+ localDev = mvPciLocalDevNumGet(pciIf);
+
+ RegOffs = PCI_STATUS_AND_COMMAND;
+
+ pciCommandStatus = mvPciConfigRead(pciIf, localBus, localDev, 0, RegOffs);
+
+ if (MV_TRUE == enable)
+ {
+ pciCommandStatus |= PSCR_MASTER_EN;
+ }
+ else
+ {
+ pciCommandStatus &= ~PSCR_MASTER_EN;
+ }
+
+ mvPciConfigWrite(pciIf, localBus, localDev, 0, RegOffs, pciCommandStatus);
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.
+*
+* DESCRIPTION:
+* This function performs read modified write to PCI command status
+* (offset 0x4) to set/reset bit 0 and 1. After those bits are set,
+* the PCI slave is allowed to respond to PCI IO space access (bit 0)
+* and PCI memory space access (bit 1).
+*
+* INPUT:
+* pciIf - PCI interface number.
+* dev - PCI device number.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_BOOL enable)
+{
+ MV_U32 pciCommandStatus;
+ MV_U32 RegOffs;
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciSlaveEnable: ERR. Invalid PCI interface %d\n", pciIf);
+ return MV_BAD_PARAM;
+ }
+ if (dev >= MAX_PCI_DEVICES)
+ {
+ mvOsPrintf("mvPciLocalDevNumSet: ERR. device number illigal %d\n", dev);
+ return MV_BAD_PARAM;
+
+ }
+
+ RegOffs = PCI_STATUS_AND_COMMAND;
+
+ pciCommandStatus=mvPciConfigRead(pciIf, bus, dev, 0, RegOffs);
+
+ if (MV_TRUE == enable)
+ {
+ pciCommandStatus |= (PSCR_IO_EN | PSCR_MEM_EN);
+ }
+ else
+ {
+ pciCommandStatus &= ~(PSCR_IO_EN | PSCR_MEM_EN);
+ }
+
+ mvPciConfigWrite(pciIf, bus, dev, 0, RegOffs, pciCommandStatus);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvPciLocalBusNumSet - Set PCI interface local bus number.
+*
+* DESCRIPTION:
+* This function sets given PCI interface its local bus number.
+* Note: In case the PCI interface is PCI-X, the information is read-only.
+*
+* INPUT:
+* pciIf - PCI interface number.
+* busNum - Bus number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_NOT_ALLOWED in case PCI interface is PCI-X.
+* MV_BAD_PARAM on bad parameters ,
+* otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum)
+{
+ MV_U32 pciP2PConfig;
+ MV_PCI_MODE pciMode;
+ MV_U32 localBus;
+ MV_U32 localDev;
+
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciLocalBusNumSet: ERR. Invalid PCI interface %d\n",pciIf);
+ return MV_BAD_PARAM;
+ }
+ if (busNum >= MAX_PCI_BUSSES)
+ {
+ mvOsPrintf("mvPciLocalBusNumSet: ERR. bus number illigal %d\n", busNum);
+ return MV_ERROR;
+
+ }
+
+ localBus = mvPciLocalBusNumGet(pciIf);
+ localDev = mvPciLocalDevNumGet(pciIf);
+
+
+ /* PCI interface mode */
+ mvPciModeGet(pciIf, &pciMode);
+
+ /* if PCI type is PCI-X then it is not allowed to change the dev number */
+ if (MV_PCIX == pciMode.pciType)
+ {
+ pciP2PConfig = mvPciConfigRead(pciIf, localBus, localDev, 0, PCIX_STATUS );
+
+ pciP2PConfig &= ~PXS_BN_MASK;
+
+ pciP2PConfig |= (busNum << PXS_BN_OFFS) & PXS_BN_MASK;
+
+ mvPciConfigWrite(pciIf, localBus, localDev, 0, PCIX_STATUS,pciP2PConfig );
+
+ }
+ else
+ {
+ pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf));
+
+ pciP2PConfig &= ~PPCR_BUS_NUM_MASK;
+
+ pciP2PConfig |= (busNum << PPCR_BUS_NUM_OFFS) & PPCR_BUS_NUM_MASK;
+
+ MV_REG_WRITE(PCI_P2P_CONFIG_REG(pciIf), pciP2PConfig);
+
+ }
+
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPciLocalBusNumGet - Get PCI interface local bus number.
+*
+* DESCRIPTION:
+* This function gets the local bus number of a given PCI interface.
+*
+* INPUT:
+* pciIf - PCI interface number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Local bus number.0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf)
+{
+ MV_U32 pciP2PConfig;
+
+ /* Parameter checking */
+ if (PCI_DEFAULT_IF != pciIf)
+ {
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciLocalBusNumGet: ERR. Invalid PCI interface %d\n",
+ pciIf);
+ return 0xFFFFFFFF;
+ }
+ }
+
+ pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf));
+ pciP2PConfig &= PPCR_BUS_NUM_MASK;
+ return (pciP2PConfig >> PPCR_BUS_NUM_OFFS);
+}
+
+
+/*******************************************************************************
+* mvPciLocalDevNumSet - Set PCI interface local device number.
+*
+* DESCRIPTION:
+* This function sets given PCI interface its local device number.
+* Note: In case the PCI interface is PCI-X, the information is read-only.
+*
+* INPUT:
+* pciIf - PCI interface number.
+* devNum - Device number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_NOT_ALLOWED in case PCI interface is PCI-X. MV_BAD_PARAM on bad parameters ,
+* otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum)
+{
+ MV_U32 pciP2PConfig;
+ MV_PCI_MODE pciMode;
+ MV_U32 localBus;
+ MV_U32 localDev;
+
+ /* Parameter checking */
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciLocalDevNumSet: ERR. Invalid PCI interface %d\n",pciIf);
+ return MV_BAD_PARAM;
+ }
+ if (devNum >= MAX_PCI_DEVICES)
+ {
+ mvOsPrintf("mvPciLocalDevNumSet: ERR. device number illigal %d\n",
+ devNum);
+ return MV_BAD_PARAM;
+
+ }
+
+ localBus = mvPciLocalBusNumGet(pciIf);
+ localDev = mvPciLocalDevNumGet(pciIf);
+
+ /* PCI interface mode */
+ mvPciModeGet(pciIf, &pciMode);
+
+ /* if PCI type is PCIX then it is not allowed to change the dev number */
+ if (MV_PCIX == pciMode.pciType)
+ {
+ pciP2PConfig = mvPciConfigRead(pciIf, localBus, localDev, 0, PCIX_STATUS );
+
+ pciP2PConfig &= ~PXS_DN_MASK;
+
+ pciP2PConfig |= (devNum << PXS_DN_OFFS) & PXS_DN_MASK;
+
+ mvPciConfigWrite(pciIf,localBus, localDev, 0, PCIX_STATUS,pciP2PConfig );
+ }
+ else
+ {
+ pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf));
+
+ pciP2PConfig &= ~PPCR_DEV_NUM_MASK;
+
+ pciP2PConfig |= (devNum << PPCR_DEV_NUM_OFFS) & PPCR_DEV_NUM_MASK;
+
+ MV_REG_WRITE(PCI_P2P_CONFIG_REG(pciIf), pciP2PConfig);
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvPciLocalDevNumGet - Get PCI interface local device number.
+*
+* DESCRIPTION:
+* This function gets the local device number of a given PCI interface.
+*
+* INPUT:
+* pciIf - PCI interface number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Local device number. 0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf)
+{
+ MV_U32 pciP2PConfig;
+
+ /* Parameter checking */
+
+ if (PCI_DEFAULT_IF != pciIf)
+ {
+ if (pciIf >= mvCtrlPciMaxIfGet())
+ {
+ mvOsPrintf("mvPciLocalDevNumGet: ERR. Invalid PCI interface %d\n",
+ pciIf);
+ return 0xFFFFFFFF;
+ }
+ }
+
+ pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf));
+
+ pciP2PConfig &= PPCR_DEV_NUM_MASK;
+
+ return (pciP2PConfig >> PPCR_DEV_NUM_OFFS);
+}
+
+
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCPCIH
+#define __INCPCIH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "pci/mvPciRegs.h"
+
+
+/* NOTE not supported in this driver:
+
+ Built In Self Test (BIST)
+ Vital Product Data (VPD)
+ Message Signaled Interrupt (MSI)
+ Power Management
+ Compact PCI Hot Swap
+ Header retarget
+
+Registers not supported:
+1) PCI DLL Status and Control (PCI0 0x1D20, PCI1 0x1DA0)
+2) PCI/MPP Pads Calibration (CI0/MPP[31:16] 0x1D1C, PCI1/MPP[15:0] 0X1D9C)
+*/
+
+/* defines */
+/* The number of supported PCI interfaces depend on Marvell controller */
+/* device number. This device number ID is located on the PCI unit */
+/* configuration header. This creates a loop where calling PCI */
+/* configuration read/write routine results a call to get PCI configuration */
+/* information etc. This macro defines a default PCI interface. This PCI */
+/* interface is sure to exist. */
+#define PCI_DEFAULT_IF 0
+
+
+/* typedefs */
+/* The Marvell controller supports both conventional PCI and PCI-X. */
+/* This enumeration describes the PCI type. */
+typedef enum _mvPciType
+{
+ MV_PCI_CONV, /* Conventional PCI */
+ MV_PCIX /* PCI-X */
+}MV_PCI_TYPE;
+
+typedef enum _mvPciMod
+{
+ MV_PCI_MOD_HOST,
+ MV_PCI_MOD_DEVICE
+}MV_PCI_MOD;
+
+
+/* The Marvell controller supports both PCI width of 32 and 64 bit. */
+/* This enumerator describes PCI width */
+typedef enum _mvPciWidth
+{
+ MV_PCI_32, /* PCI width 32bit */
+ MV_PCI_64 /* PCI width 64bit */
+}MV_PCI_WIDTH;
+
+/* This structure describes the PCI unit configured type, speed and width. */
+typedef struct _mvPciMode
+{
+ MV_PCI_TYPE pciType; /* PCI type */
+ MV_U32 pciSpeed; /* Assuming PCI base clock on board is 33MHz */
+ MV_PCI_WIDTH pciWidth; /* PCI bus width */
+}MV_PCI_MODE;
+
+/* mvPciInit - Initialize PCI interfaces*/
+MV_VOID mvPciHalInit(MV_U32 pciIf, MV_PCI_MOD pciIfmod);
+
+/* mvPciCommandSet - Set PCI comman register value.*/
+MV_STATUS mvPciCommandSet(MV_U32 pciIf, MV_U32 command);
+
+/* mvPciModeGet - Get PCI interface mode.*/
+MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode);
+
+/* mvPciRetrySet - Set PCI retry counters*/
+MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter);
+
+/* mvPciDiscardTimerSet - Set PCI discard timer*/
+MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles);
+
+/* mvPciArbEnable - PCI arbiter enable/disable*/
+MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable);
+
+/* mvPciArbParkDis - Disable arbiter parking on agent */
+MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask);
+
+/* mvPciArbBrokDetectSet - Set PCI arbiter broken detection */
+MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles);
+
+/* mvPciConfigRead - Read from configuration space */
+MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func,MV_U32 regOff);
+
+/* mvPciConfigWrite - Write to configuration space */
+MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data);
+
+/* mvPciMasterEnable - Enable/disale PCI interface master transactions.*/
+MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable);
+
+/* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.*/
+MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,MV_BOOL enable);
+
+/* mvPciLocalBusNumSet - Set PCI interface local bus number.*/
+MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum);
+
+/* mvPciLocalBusNumGet - Get PCI interface local bus number.*/
+MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf);
+
+/* mvPciLocalDevNumSet - Set PCI interface local device number.*/
+MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum);
+
+/* mvPciLocalDevNumGet - Get PCI interface local device number.*/
+MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf);
+
+
+#endif /* #ifndef __INCPCIH */
+
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCPCIREGSH
+#define __INCPCIREGSH
+
+
+#include "pci-if/mvPciIfRegs.h"
+/* defines */
+#define MAX_PCI_DEVICES 32
+#define MAX_PCI_FUNCS 8
+#define MAX_PCI_BUSSES 128
+
+/* enumerators */
+
+/* This enumerator described the possible PCI slave targets. */
+/* PCI slave targets are designated memory/IO address spaces that the */
+/* PCI slave targets can access. They are also refered as "targets" */
+/* this enumeratoe order is determined by the content of :
+ PCI_BASE_ADDR_ENABLE_REG */
+
+
+/* registers offsetes defines */
+
+
+
+/*************************/
+/* PCI control registers */
+/*************************/
+/* maen : should add new registers */
+#define PCI_CMD_REG(pciIf) (0x30c00 + ((pciIf) * 0x80))
+#define PCI_MODE_REG(pciIf) (0x30d00 + ((pciIf) * 0x80))
+#define PCI_RETRY_REG(pciIf) (0x30c04 + ((pciIf) * 0x80))
+#define PCI_DISCARD_TIMER_REG(pciIf) (0x30d04 + ((pciIf) * 0x80))
+#define PCI_ARBITER_CTRL_REG(pciIf) (0x31d00 + ((pciIf) * 0x80))
+#define PCI_P2P_CONFIG_REG(pciIf) (0x31d14 + ((pciIf) * 0x80))
+#define PCI_ACCESS_CTRL_BASEL_REG(pciIf, targetWin) \
+ (0x31e00 + ((pciIf) * 0x80) + ((targetWin) * 0x10))
+#define PCI_ACCESS_CTRL_BASEH_REG(pciIf, targetWin) \
+ (0x31e04 + ((pciIf) * 0x80) + ((targetWin) * 0x10))
+#define PCI_ACCESS_CTRL_SIZE_REG(pciIf, targetWin) \
+ (0x31e08 + ((pciIf) * 0x80) + ((targetWin) * 0x10))
+
+#define PCI_DLL_CTRL_REG(pciIf) (0x31d20 + ((pciIf) * 0x80))
+
+/* PCI Dll Control (PDC)*/
+#define PDC_DLL_EN BIT0
+
+
+/* PCI Command Register (PCR) */
+#define PCR_MASTER_BYTE_SWAP_EN BIT0
+#define PCR_MASTER_WR_COMBINE_EN BIT4
+#define PCR_MASTER_RD_COMBINE_EN BIT5
+#define PCR_MASTER_WR_TRIG_WHOLE BIT6
+#define PCR_MASTER_RD_TRIG_WHOLE BIT7
+#define PCR_MASTER_MEM_RD_LINE_EN BIT8
+#define PCR_MASTER_MEM_RD_MULT_EN BIT9
+#define PCR_MASTER_WORD_SWAP_EN BIT10
+#define PCR_SLAVE_WORD_SWAP_EN BIT11
+#define PCR_NS_ACCORDING_RCV_TRANS BIT14
+#define PCR_MASTER_PCIX_REQ64N_EN BIT15
+#define PCR_SLAVE_BYTE_SWAP_EN BIT16
+#define PCR_MASTER_DAC_EN BIT17
+#define PCR_MASTER_M64_ALLIGN BIT18
+#define PCR_ERRORS_PROPAGATION_EN BIT19
+#define PCR_SLAVE_SWAP_ENABLE BIT20
+#define PCR_MASTER_SWAP_ENABLE BIT21
+#define PCR_MASTER_INT_SWAP_EN BIT22
+#define PCR_LOOP_BACK_ENABLE BIT23
+#define PCR_SLAVE_INTREG_SWAP_OFFS 24
+#define PCR_SLAVE_INTREG_SWAP_MASK 0x3
+#define PCR_SLAVE_INTREG_BYTE_SWAP \
+ (MV_BYTE_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK)
+#define PCR_SLAVE_INTREG_NO_SWAP \
+ (MV_NO_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK)
+#define PCR_SLAVE_INTREG_BYTE_WORD \
+ (MV_BYTE_WORD_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK)
+#define PCR_SLAVE_INTREG_WORD_SWAP \
+ (MV_WORD_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK)
+#define PCR_RESET_REASSERTION_EN BIT26
+#define PCR_PCI_TO_CPU_REG_ORDER_EN BIT28
+#define PCR_CPU_TO_PCI_ORDER_EN BIT29
+#define PCR_PCI_TO_CPU_ORDER_EN BIT30
+
+/* PCI Mode Register (PMR) */
+#define PMR_PCI_ID_OFFS 0 /* PCI Interface ID */
+#define PMR_PCI_ID_MASK (0x1 << PMR_PCI_ID_OFFS)
+#define PMR_PCI_ID_PCI(pciNum) ((pciNum) << PCI_MODE_PCIID_OFFS)
+
+#define PMR_PCI_64_OFFS 2 /* 64-bit PCI Interface */
+#define PMR_PCI_64_MASK (0x1 << PMR_PCI_64_OFFS)
+#define PMR_PCI_64_64BIT (0x1 << PMR_PCI_64_OFFS)
+#define PMR_PCI_64_32BIT (0x0 << PMR_PCI_64_OFFS)
+
+#define PMR_PCI_MODE_OFFS 4 /* PCI interface mode of operation */
+#define PMR_PCI_MODE_MASK (0x3 << PMR_PCI_MODE_OFFS)
+#define PMR_PCI_MODE_CONV (0x0 << PMR_PCI_MODE_OFFS)
+#define PMR_PCI_MODE_PCIX_66MHZ (0x1 << PMR_PCI_MODE_OFFS)
+#define PMR_PCI_MODE_PCIX_100MHZ (0x2 << PMR_PCI_MODE_OFFS)
+#define PMR_PCI_MODE_PCIX_133MHZ (0x3 << PMR_PCI_MODE_OFFS)
+
+#define PMR_EXP_ROM_SUPPORT BIT8 /* Expansion ROM Active */
+
+#define PMR_PCI_RESET_OFFS 31 /* PCI Interface Reset Indication */
+#define PMR_PCI_RESET_MASK (0x1 << PMR_PCI_RESET_OFFS)
+#define PMR_PCI_RESET_PCIXRST (0x0 << PMR_PCI_RESET_OFFS)
+
+
+/* PCI Retry Register (PRR) */
+#define PRR_RETRY_CNTR_OFFS 16 /* Retry Counter */
+#define PRR_RETRY_CNTR_MAX 0xff
+#define PRR_RETRY_CNTR_MASK (PRR_RETRY_CNTR_MAX << PRR_RETRY_CNTR_OFFS)
+
+
+/* PCI Discard Timer Register (PDTR) */
+#define PDTR_TIMER_OFFS 0 /* Timer */
+#define PDTR_TIMER_MAX 0xffff
+#define PDTR_TIMER_MIN 0x7F
+#define PDTR_TIMER_MASK (PDTR_TIMER_MAX << PDTR_TIMER_OFFS)
+
+
+/* PCI Arbiter Control Register (PACR) */
+#define PACR_BROKEN_DETECT_EN BIT1 /* Broken Detection Enable */
+
+#define PACR_BROKEN_VAL_OFFS 3 /* Broken Value */
+#define PACR_BROKEN_VAL_MASK (0xf << PACR_BROKEN_VAL_OFFS)
+#define PACR_BROKEN_VAL_CONV_MIN 0x2
+#define PACR_BROKEN_VAL_PCIX_MIN 0x6
+
+#define PACR_PARK_DIS_OFFS 14 /* Parking Disable */
+#define PACR_PARK_DIS_MAX_AGENT 0x3f
+#define PACR_PARK_DIS_MASK (PACR_PARK_DIS_MAX_AGENT<<PACR_PARK_DIS_OFFS)
+#define PACR_PARK_DIS(agent) ((1 << (agent)) << PACR_PARK_DIS_OFFS)
+
+#define PACR_ARB_ENABLE BIT31 /* Enable Internal Arbiter */
+
+
+/* PCI P2P Configuration Register (PPCR) */
+#define PPCR_2ND_BUS_L_OFFS 0 /* 2nd PCI Interface Bus Range Lower */
+#define PPCR_2ND_BUS_L_MASK (0xff << PPCR_2ND_BUS_L_OFFS)
+
+#define PPCR_2ND_BUS_H_OFFS 8 /* 2nd PCI Interface Bus Range Upper */
+#define PPCR_2ND_BUS_H_MASK (0xff << PPCR_2ND_BUS_H_OFFS)
+
+#define PPCR_BUS_NUM_OFFS 16 /* The PCI interface's Bus number */
+#define PPCR_BUS_NUM_MASK (0xff << PPCR_BUS_NUM_OFFS)
+
+#define PPCR_DEV_NUM_OFFS 24 /* The PCI interface\92s Device number */
+#define PPCR_DEV_NUM_MASK (0xff << PPCR_DEV_NUM_OFFS)
+
+
+/* PCI Access Control Base Low Register (PACBLR) */
+#define PACBLR_EN BIT0 /* Access control window enable */
+
+#define PACBLR_ACCPROT BIT4 /* Access Protect */
+#define PACBLR_WRPROT BIT5 /* Write Protect */
+
+#define PACBLR_PCISWAP_OFFS 6 /* PCI slave Data Swap Control */
+#define PACBLR_PCISWAP_MASK (0x3 << PACBLR_PCISWAP_OFFS)
+#define PACBLR_PCISWAP_BYTE (0x0 << PACBLR_PCISWAP_OFFS)
+#define PACBLR_PCISWAP_NO_SWAP (0x1 << PACBLR_PCISWAP_OFFS)
+#define PACBLR_PCISWAP_BYTE_WORD (0x2 << PACBLR_PCISWAP_OFFS)
+#define PACBLR_PCISWAP_WORD (0x3 << PACBLR_PCISWAP_OFFS)
+
+#define PACBLR_RDMBURST_OFFS 8 /* Read Max Burst */
+#define PACBLR_RDMBURST_MASK (0x3 << PACBLR_RDMBURST_OFFS)
+#define PACBLR_RDMBURST_32BYTE (0x0 << PACBLR_RDMBURST_OFFS)
+#define PACBLR_RDMBURST_64BYTE (0x1 << PACBLR_RDMBURST_OFFS)
+#define PACBLR_RDMBURST_128BYTE (0x2 << PACBLR_RDMBURST_OFFS)
+
+#define PACBLR_RDSIZE_OFFS 10 /* Typical PCI read transaction Size. */
+#define PACBLR_RDSIZE_MASK (0x3 << PACBLR_RDSIZE_OFFS)
+#define PACBLR_RDSIZE_32BYTE (0x0 << PACBLR_RDSIZE_OFFS)
+#define PACBLR_RDSIZE_64BYTE (0x1 << PACBLR_RDSIZE_OFFS)
+#define PACBLR_RDSIZE_128BYTE (0x2 << PACBLR_RDSIZE_OFFS)
+#define PACBLR_RDSIZE_256BYTE (0x3 << PACBLR_RDSIZE_OFFS)
+
+#define PACBLR_BASE_L_OFFS 12 /* Corresponds to address bits [31:12] */
+#define PACBLR_BASE_L_MASK (0xfffff << PACBLR_BASE_L_OFFS)
+#define PACBLR_BASE_L_ALIGNMENT (1 << PACBLR_BASE_L_OFFS)
+#define PACBLR_BASE_ALIGN_UP(base) \
+ ((base+PACBLR_BASE_L_ALIGNMENT)&PACBLR_BASE_L_MASK)
+#define PACBLR_BASE_ALIGN_DOWN(base) (base & PACBLR_BASE_L_MASK)
+
+
+/* PCI Access Control Base High Register (PACBHR) */
+#define PACBHR_BASE_H_OFFS 0 /* Corresponds to address bits [63:32] */
+#define PACBHR_CTRL_BASE_H_MASK (0xffffffff << PACBHR_BASE_H_OFFS)
+
+/* PCI Access Control Size Register (PACSR) */
+#define PACSR_WRMBURST_OFFS 8 /* Write Max Burst */
+#define PACSR_WRMBURST_MASK (0x3 << PACSR_WRMBURST_OFFS)
+#define PACSR_WRMBURST_32BYTE (0x0 << PACSR_WRMBURST_OFFS)
+#define PACSR_WRMBURST_64BYTE (0x1 << PACSR_WRMBURST_OFFS)
+#define PACSR_WRMBURST_128BYTE (0x2 << PACSR_WRMBURST_OFFS)
+
+#define PACSR_PCI_ORDERING BIT11 /* PCI Ordering required */
+
+#define PACSR_SIZE_OFFS 12 /* PCI access window size */
+#define PACSR_SIZE_MASK (0xfffff << PACSR_SIZE_OFFS)
+#define PACSR_SIZE_ALIGNMENT (1 << PACSR_SIZE_OFFS)
+#define PACSR_SIZE_ALIGN_UP(size) \
+ ((size+PACSR_SIZE_ALIGNMENT)&PACSR_SIZE_MASK)
+#define PACSR_SIZE_ALIGN_DOWN(size) (size & PACSR_SIZE_MASK)
+
+
+/***************************************/
+/* PCI Configuration Access Registers */
+/***************************************/
+
+#define PCI_CONFIG_ADDR_REG(pciIf) (0x30C78 - ((pciIf) * 0x80) )
+#define PCI_CONFIG_DATA_REG(pciIf) (0x30C7C - ((pciIf) * 0x80) )
+#define PCI_INT_ACK_REG(pciIf) (0x30C34 + ((pciIf) * 0x80) )
+
+/* PCI Configuration Address Register (PCAR) */
+#define PCAR_REG_NUM_OFFS 2
+#define PCAR_REG_NUM_MASK (0x3F << PCAR_REG_NUM_OFFS)
+
+#define PCAR_FUNC_NUM_OFFS 8
+#define PCAR_FUNC_NUM_MASK (0x7 << PCAR_FUNC_NUM_OFFS)
+
+#define PCAR_DEVICE_NUM_OFFS 11
+#define PCAR_DEVICE_NUM_MASK (0x1F << PCAR_DEVICE_NUM_OFFS)
+
+#define PCAR_BUS_NUM_OFFS 16
+#define PCAR_BUS_NUM_MASK (0xFF << PCAR_BUS_NUM_OFFS)
+
+#define PCAR_CONFIG_EN BIT31
+
+
+/***************************************/
+/* PCI Configuration registers */
+/***************************************/
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers */
+/*********************************************/
+
+/* Marvell Specific */
+#define PCI_SCS0_BASE_ADDR_LOW 0x010
+#define PCI_SCS0_BASE_ADDR_HIGH 0x014
+#define PCI_SCS1_BASE_ADDR_LOW 0x018
+#define PCI_SCS1_BASE_ADDR_HIGH 0x01C
+#define PCI_INTER_REG_MEM_MAPPED_BASE_ADDR_L 0x020
+#define PCI_INTER_REG_MEM_MAPPED_BASE_ADDR_H 0x024
+
+/* capability list */
+#define PCI_POWER_MNG_CAPABILITY 0x040
+#define PCI_POWER_MNG_STATUS_CONTROL 0x044
+#define PCI_VPD_ADDRESS_REG 0x048
+#define PCI_VPD_DATA_REG 0x04c
+#define PCI_MSI_MESSAGE_CONTROL 0x050
+#define PCI_MSI_MESSAGE_ADDR 0x054
+#define PCI_MSI_MESSAGE_UPPER_ADDR 0x058
+#define PCI_MSI_MESSAGE_DATA 0x05c
+#define PCIX_COMMAND 0x060
+#define PCIX_STATUS 0x064
+#define PCI_COMPACT_PCI_HOT_SWAP 0x068
+
+
+/*********************************************/
+/* PCI Configuration, Function 1, Registers */
+/*********************************************/
+
+#define PCI_SCS2_BASE_ADDR_LOW 0x10
+#define PCI_SCS2_BASE_ADDR_HIGH 0x14
+#define PCI_SCS3_BASE_ADDR_LOW 0x18
+#define PCI_SCS3_BASE_ADDR_HIGH 0x1c
+
+
+/***********************************************/
+/* PCI Configuration, Function 2, Registers */
+/***********************************************/
+
+#define PCI_DEVCS0_BASE_ADDR_LOW 0x10
+#define PCI_DEVCS0_BASE_ADDR_HIGH 0x14
+#define PCI_DEVCS1_BASE_ADDR_LOW 0x18
+#define PCI_DEVCS1_BASE_ADDR_HIGH 0x1c
+#define PCI_DEVCS2_BASE_ADDR_LOW 0x20
+#define PCI_DEVCS2_BASE_ADDR_HIGH 0x24
+
+/***********************************************/
+/* PCI Configuration, Function 3, Registers */
+/***********************************************/
+
+#define PCI_BOOTCS_BASE_ADDR_LOW 0x18
+#define PCI_BOOTCS_BASE_ADDR_HIGH 0x1c
+
+/***********************************************/
+/* PCI Configuration, Function 4, Registers */
+/***********************************************/
+
+#define PCI_P2P_MEM0_BASE_ADDR_LOW 0x10
+#define PCI_P2P_MEM0_BASE_ADDR_HIGH 0x14
+#define PCI_P2P_IO_BASE_ADDR 0x20
+#define PCI_INTER_REGS_IO_MAPPED_BASE_ADDR 0x24
+
+/* PCIX_STATUS register fields (PXS) */
+
+#define PXS_FN_OFFS 0 /* Description Number */
+#define PXS_FN_MASK (0x7 << PXS_FN_OFFS)
+
+#define PXS_DN_OFFS 3 /* Device Number */
+#define PXS_DN_MASK (0x1f << PXS_DN_OFFS)
+
+#define PXS_BN_OFFS 8 /* Bus Number */
+#define PXS_BN_MASK (0xff << PXS_BN_OFFS)
+
+
+/* PCI Error Report Register Map */
+#define PCI_SERRN_MASK_REG(pciIf) (0x30c28 + (pciIf * 0x80))
+#define PCI_CAUSE_REG(pciIf) (0x31d58 + (pciIf * 0x80))
+#define PCI_MASK_REG(pciIf) (0x31d5C + (pciIf * 0x80))
+#define PCI_ERROR_ADDR_LOW_REG(pciIf) (0x31d40 + (pciIf * 0x80))
+#define PCI_ERROR_ADDR_HIGH_REG(pciIf) (0x31d44 + (pciIf * 0x80))
+#define PCI_ERROR_ATTRIBUTE_REG(pciIf) (0x31d48 + (pciIf * 0x80))
+#define PCI_ERROR_COMMAND_REG(pciIf) (0x31d50 + (pciIf * 0x80))
+
+/* PCI Interrupt Cause Register (PICR) */
+#define PICR_ERR_SEL_OFFS 27
+#define PICR_ERR_SEL_MASK (0x1f << PICR_ERR_SEL_OFFS)
+
+/* PCI Error Command Register (PECR) */
+#define PECR_ERR_CMD_OFFS 0
+#define PECR_ERR_CMD_MASK (0xf << PECR_ERR_CMD_OFFS)
+#define PECR_DAC BIT4
+
+
+/* defaults */
+/* Set bits means value is about to change according to new value */
+#define PCI_COMMAND_DEFAULT_MASK 0xffffdff1
+#define PCI_COMMAND_DEFAULT \
+ (PCR_MASTER_WR_TRIG_WHOLE | \
+ PCR_MASTER_RD_TRIG_WHOLE | \
+ PCR_MASTER_MEM_RD_LINE_EN | \
+ PCR_MASTER_MEM_RD_MULT_EN | \
+ PCR_NS_ACCORDING_RCV_TRANS | \
+ PCR_MASTER_PCIX_REQ64N_EN | \
+ PCR_MASTER_DAC_EN | \
+ PCR_MASTER_M64_ALLIGN | \
+ PCR_ERRORS_PROPAGATION_EN)
+
+
+#define PCI_ARBITER_CTRL_DEFAULT_MASK 0x801fc07a
+#define PCI_ARBITER_CTRL_DEFAULT \
+ (PACR_BROKEN_VAL_PCIX_MIN << PACR_BROKEN_VAL_OFFS)
+
+
+#endif /* #ifndef __INCPCIREGSH */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "pex/mvPex.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* defines */
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+MV_STATUS mvPexHalInit(MV_U32 pexIf, MV_PEX_TYPE pexType)
+{
+ MV_PEX_MODE pexMode;
+ MV_U32 regVal;
+ MV_U32 status;
+
+ /* First implement Guideline (GL# PCI Express-2) Wrong Default Value */
+ /* to Transmitter Output Current (TXAMP) Relevant for: 88F5181-A1/B0/B1 */
+ /* and 88F5281-B0 and above, 88F5182, 88F5082, 88F5181L, 88F6082/L */
+
+ if ((mvCtrlModelGet() != MV_1281_DEV_ID) &&
+ (mvCtrlModelGet() != MV_6281_DEV_ID) &&
+ (mvCtrlModelGet() != MV_6192_DEV_ID) &&
+ (mvCtrlModelGet() != MV_6190_DEV_ID) &&
+ (mvCtrlModelGet() != MV_6180_DEV_ID) &&
+ (mvCtrlModelGet() != MV_6183_DEV_ID) &&
+ (mvCtrlModelGet() != MV_6183L_DEV_ID) &&
+ (mvCtrlModelGet() != MV_78100_DEV_ID) &&
+ (mvCtrlModelGet() != MV_78200_DEV_ID) &&
+ (mvCtrlModelGet() != MV_76100_DEV_ID) &&
+ (mvCtrlModelGet() != MV_78XX0_DEV_ID))
+ {
+
+ /* Read current value of TXAMP */
+ MV_REG_WRITE(0x41b00, 0x80820000); /* Write the read command */
+
+ regVal = MV_REG_READ(0x41b00); /* Extract the data */
+
+ /* Prepare new data for write */
+ regVal &= ~0x7; /* Clear bits [2:0] */
+ regVal |= 0x4; /* Set the new value */
+ regVal &= ~0x80000000; /* Set "write" command */
+ MV_REG_WRITE(0x41b00, regVal); /* Write the write command */
+
+ }
+ else
+ {
+ /* Implement 1.0V termination GL for 88F1281 device only */
+ /* BIT0 - Common mode feedback */
+ /* BIT3 - TxBuf, extra drive for 1.0V termination */
+ if (mvCtrlModelGet() == MV_1281_DEV_ID)
+ {
+ MV_REG_WRITE(0x41b00, 0x80860000); /* Write the read command */
+ regVal = MV_REG_READ(0x41b00); /* Extract the data */
+ regVal |= (BIT0 | BIT3);
+ regVal &= ~0x80000000; /* Set "write" command */
+ MV_REG_WRITE(0x41b00, regVal); /* Write the write command */
+
+ MV_REG_WRITE(0x31b00, 0x80860000); /* Write the read command */
+ regVal = MV_REG_READ(0x31b00); /* Extract the data */
+ regVal |= (BIT0 | BIT3);
+ regVal &= ~0x80000000; /* Set "write" command */
+ MV_REG_WRITE(0x31b00, regVal); /* Write the write command */
+ }
+ }
+
+ if( mvPexModeGet(pexIf, &pexMode) != MV_OK)
+ {
+ mvOsPrintf("PEX init ERR. mvPexModeGet failed (pexType=%d)\n",pexMode.pexType);
+ return MV_ERROR;
+ }
+
+ /* Check that required PEX type is the one set in reset time */
+ if (pexType != pexMode.pexType)
+ {
+ /* No Link. Shut down the Phy */
+ mvPexPowerDown(pexIf);
+ mvOsPrintf("PEX init ERR. PEX type sampled mismatch (%d,%d)\n",pexType,pexMode.pexType);
+ return MV_ERROR;
+ }
+
+ if (MV_PEX_ROOT_COMPLEX == pexType)
+ {
+ mvPexLocalBusNumSet(pexIf, PEX_HOST_BUS_NUM(pexIf));
+ mvPexLocalDevNumSet(pexIf, PEX_HOST_DEV_NUM(pexIf));
+
+ /* Local device master Enable */
+ mvPexMasterEnable(pexIf, MV_TRUE);
+
+ /* Local device slave Enable */
+ mvPexSlaveEnable(pexIf, mvPexLocalBusNumGet(pexIf),
+ mvPexLocalDevNumGet(pexIf), MV_TRUE);
+ /* Interrupt disable */
+ status = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND));
+ status |= PXSAC_INT_DIS;
+ MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND), status);
+ }
+
+ /* now wait 500 ms to be sure the link is valid (spec compliant) */
+ mvOsDelay(500);
+ /* Check if we have link */
+ if (MV_REG_READ(PEX_STATUS_REG(pexIf)) & PXSR_DL_DOWN)
+ {
+ mvOsPrintf("PEX%d interface detected no Link.\n",pexIf);
+ return MV_NO_SUCH;
+ }
+
+ if (MV_PEX_WITDH_X1 == pexMode.pexWidth)
+ {
+ mvOsPrintf("PEX%d interface detected Link X1\n",pexIf);
+ }
+ else
+ {
+ mvOsPrintf("PEX%d interface detected Link X4\n",pexIf);
+ }
+
+#ifdef PCIE_VIRTUAL_BRIDGE_SUPPORT
+ mvPexVrtBrgInit(pexIf);
+#endif
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvPexModeGet - Get Pex Mode
+*
+* DESCRIPTION:
+*
+* INPUT:
+* pexIf - PEX interface number.
+*
+* OUTPUT:
+* pexMode - Pex mode structure
+*
+* RETURN:
+* MV_OK on success , MV_ERROR otherwise
+*
+*******************************************************************************/
+MV_U32 mvPexModeGet(MV_U32 pexIf,MV_PEX_MODE *pexMode)
+{
+ MV_U32 pexData;
+
+ /* Parameter checking */
+ if (PEX_DEFAULT_IF != pexIf)
+ {
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexModeGet: ERR. Invalid PEX interface %d\n",pexIf);
+ return MV_ERROR;
+ }
+ }
+
+ pexData = MV_REG_READ(PEX_CTRL_REG(pexIf));
+
+ switch (pexData & PXCR_DEV_TYPE_CTRL_MASK)
+ {
+ case PXCR_DEV_TYPE_CTRL_CMPLX:
+ pexMode->pexType = MV_PEX_ROOT_COMPLEX;
+ break;
+ case PXCR_DEV_TYPE_CTRL_POINT:
+ pexMode->pexType = MV_PEX_END_POINT;
+ break;
+
+ }
+
+ /* Check if we have link */
+ if (MV_REG_READ(PEX_STATUS_REG(pexIf)) & PXSR_DL_DOWN)
+ {
+ pexMode->pexLinkUp = MV_FALSE;
+
+ /* If there is no link, the auto negotiation data is worthless */
+ pexMode->pexWidth = MV_PEX_WITDH_INVALID;
+ }
+ else
+ {
+ pexMode->pexLinkUp = MV_TRUE;
+
+ /* We have link. The link width is now valid */
+ pexData = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG));
+ pexMode->pexWidth = ((pexData & PXLCSR_NEG_LNK_WDTH_MASK) >>
+ PXLCSR_NEG_LNK_WDTH_OFFS);
+ }
+
+ return MV_OK;
+}
+
+
+/* PEX configuration space read write */
+
+/*******************************************************************************
+* mvPexConfigRead - Read from configuration space
+*
+* DESCRIPTION:
+* This function performs a 32 bit read from PEX configuration space.
+* It supports both type 0 and type 1 of Configuration Transactions
+* (local and over bridge). In order to read from local bus segment, use
+* bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers
+* will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+* pexIf - PEX interface number.
+* bus - PEX segment bus number.
+* dev - PEX device number.
+* func - Function number.
+* regOffs - Register offset.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* 32bit register data, 0xffffffff on error
+*
+*******************************************************************************/
+MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func,
+ MV_U32 regOff)
+{
+#if defined(PCIE_VIRTUAL_BRIDGE_SUPPORT)
+ return mvPexVrtBrgConfigRead (pexIf, bus, dev, func, regOff);
+}
+
+MV_U32 mvPexHwConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func,
+ MV_U32 regOff)
+{
+#endif
+ MV_U32 pexData = 0;
+ MV_U32 localDev,localBus;
+
+ /* Parameter checking */
+ if (PEX_DEFAULT_IF != pexIf)
+ {
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexConfigRead: ERR. Invalid PEX interface %d\n",pexIf);
+ return 0xFFFFFFFF;
+ }
+ }
+
+ if (dev >= MAX_PEX_DEVICES)
+ {
+ DB(mvOsPrintf("mvPexConfigRead: ERR. device number illigal %d\n", dev));
+ return 0xFFFFFFFF;
+ }
+
+ if (func >= MAX_PEX_FUNCS)
+ {
+ DB(mvOsPrintf("mvPexConfigRead: ERR. function num illigal %d\n", func));
+ return 0xFFFFFFFF;
+ }
+
+ if (bus >= MAX_PEX_BUSSES)
+ {
+ DB(mvOsPrintf("mvPexConfigRead: ERR. bus number illigal %d\n", bus));
+ return MV_ERROR;
+ }
+
+ DB(mvOsPrintf("mvPexConfigRead: pexIf %d, bus %d, dev %d, func %d, regOff 0x%x\n",
+ pexIf, bus, dev, func, regOff));
+
+ localDev = mvPexLocalDevNumGet(pexIf);
+ localBus = mvPexLocalBusNumGet(pexIf);
+
+ /* Speed up the process. In case on no link, return MV_ERROR */
+ if ((dev != localDev) || (bus != localBus))
+ {
+ pexData = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+ if ((pexData & PXSR_DL_DOWN))
+ {
+ return MV_ERROR;
+ }
+ }
+
+ /* in PCI Express we have only one device number */
+ /* and this number is the first number we encounter
+ else that the localDev*/
+ /* spec pex define return on config read/write on any device */
+ if (bus == localBus)
+ {
+ if (localDev == 0)
+ {
+ /* if local dev is 0 then the first number we encounter
+ after 0 is 1 */
+ if ((dev != 1)&&(dev != localDev))
+ {
+ return MV_ERROR;
+ }
+ }
+ else
+ {
+ /* if local dev is not 0 then the first number we encounter
+ is 0 */
+
+ if ((dev != 0)&&(dev != localDev))
+ {
+ return MV_ERROR;
+ }
+ }
+ if(func != 0 ) /* i.e bridge */
+ {
+ return MV_ERROR;
+ }
+ }
+
+
+ /* Creating PEX address to be passed */
+ pexData = (bus << PXCAR_BUS_NUM_OFFS);
+ pexData |= (dev << PXCAR_DEVICE_NUM_OFFS);
+ pexData |= (func << PXCAR_FUNC_NUM_OFFS);
+ pexData |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */
+ /* extended register space */
+ pexData |=(((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >>
+ PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS);
+
+ pexData |= PXCAR_CONFIG_EN;
+
+ /* Write the address to the PEX configuration address register */
+ MV_REG_WRITE(PEX_CFG_ADDR_REG(pexIf), pexData);
+
+ DB(mvOsPrintf("mvPexConfigRead:address pexData=%x ",pexData));
+
+
+ /* In order to let the PEX controller absorbed the address of the read */
+ /* transaction we perform a validity check that the address was written */
+ if(pexData != MV_REG_READ(PEX_CFG_ADDR_REG(pexIf)))
+ {
+ return MV_ERROR;
+ }
+
+ /* cleaning Master Abort */
+ MV_REG_BIT_SET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_STATUS_AND_COMMAND),
+ PXSAC_MABORT);
+#if 0
+ /* Guideline (GL# PCI Express-1) Erroneous Read Data on Configuration */
+ /* This guideline is relevant for all devices except of the following devices:
+ 88F5281-BO and above, 88F5181L-A0 and above, 88F1281 A0 and above
+ 88F6183 A0 and above, 88F6183L */
+ if ( ( (dev != localDev) || (bus != localBus) ) &&
+ (
+ !(MV_5281_DEV_ID == mvCtrlModelGet())&&
+ !((MV_5181_DEV_ID == mvCtrlModelGet())&& (mvCtrlRevGet() >= MV_5181L_A0_REV))&&
+ !(MV_1281_DEV_ID == mvCtrlModelGet())&&
+ !(MV_6183_DEV_ID == mvCtrlModelGet())&&
+ !(MV_6183L_DEV_ID == mvCtrlModelGet())&&
+ !(MV_6281_DEV_ID == mvCtrlModelGet())&&
+ !(MV_6192_DEV_ID == mvCtrlModelGet())&&
+ !(MV_6190_DEV_ID == mvCtrlModelGet())&&
+ !(MV_6180_DEV_ID == mvCtrlModelGet())&&
+ !(MV_78XX0_DEV_ID == mvCtrlModelGet())
+ ))
+ {
+
+ /* PCI-Express configuration read work-around */
+
+ /* we will use one of the Punit (AHBToMbus) windows to access the xbar
+ and read the data from there */
+ /*
+ Need to configure the 2 free Punit (AHB to MBus bridge)
+ address decoding windows:
+ Configure the flash Window to handle Configuration space requests
+ for PEX0/1:
+ 1. write 0x7931/0x7941 to the flash window and the size,
+ 79-xbar attr (pci cfg), 3/4-xbar target (pex0/1), 1-WinEn
+ 2. write base to flash window
+
+ Configuration transactions from the CPU should write/read the data
+ to/from address of the form:
+ addr[31:28] = 0x5 (for PEX0) or 0x6 (for PEX1)
+ addr[27:24] = extended register number
+ addr[23:16] = bus number
+ addr[15:11] = device number
+ addr[10:8] = function number
+ addr[7:0] = register number
+ */
+
+ #include "ctrlEnv/sys/mvAhbToMbus.h"
+ {
+ MV_U32 winNum;
+ MV_AHB_TO_MBUS_DEC_WIN originWin;
+ MV_U32 pciAddr=0;
+ MV_U32 remapLow=0,remapHigh=0;
+
+ /*
+ We will use DEV_CS2\Flash window for this workarround
+ */
+
+ winNum = mvAhbToMbusWinTargetGet(PEX_CONFIG_RW_WA_TARGET);
+
+ /* save remap values if exist */
+ if ((1 == winNum)||(0 == winNum))
+ {
+ remapLow = MV_REG_READ(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum));
+ remapHigh = MV_REG_READ(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum));
+
+ }
+
+
+ /* save the original window values */
+ mvAhbToMbusWinGet(winNum,&originWin);
+
+ if (PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES)
+ {
+ /* set the window as xbar window */
+ if (pexIf)
+ {
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum),
+ (0x7931 | (((originWin.addrWin.size >> 16)-1) ) << 16));
+ }
+ else
+ {
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum),
+ (0x7941 | (((originWin.addrWin.size >> 16)-1) ) << 16));
+ }
+
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum),
+ originWin.addrWin.baseLow);
+
+ /*pciAddr = originWin.addrWin.baseLow;*/
+ pciAddr = (MV_U32)CPU_MEMIO_UNCACHED_ADDR(
+ (MV_U32)originWin.addrWin.baseLow);
+
+ }
+ else
+ {
+ /* set the window as xbar window */
+ if (pexIf)
+ {
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum),
+ (0x7931 | (((PEX_CONFIG_RW_WA_SIZE >> 16)-1) ) << 16));
+ }
+ else
+ {
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum),
+ (0x7941 | (((PEX_CONFIG_RW_WA_SIZE >> 16)-1) ) << 16));
+ }
+
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum),
+ PEX_CONFIG_RW_WA_BASE);
+
+ pciAddr = (MV_U32)CPU_MEMIO_UNCACHED_ADDR(PEX_CONFIG_RW_WA_BASE);
+ }
+
+
+ /* remap should be as base */
+ if ((1 == winNum)||(0 == winNum))
+ {
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum),pciAddr);
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum),0);
+
+ }
+
+ /* extended register space */
+ pciAddr |= (bus << 16);
+ pciAddr |= (dev << 11);
+ pciAddr |= (func << 8);
+ pciAddr |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */
+
+ pexData = *(MV_U32*)pciAddr;
+ pexData = MV_32BIT_LE(pexData); /* Data always in LE */
+
+ /* restore the original window values */
+ mvAhbToMbusWinSet(winNum,&originWin);
+
+ /* restore original remap values*/
+ if ((1 == winNum)||(0 == winNum))
+ {
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum),remapLow);
+ MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum),remapHigh);
+
+ }
+ }
+ }
+ else
+#endif
+ {
+ /* Read the Data returned in the PEX Data register */
+ pexData = MV_REG_READ(PEX_CFG_DATA_REG(pexIf));
+
+ }
+
+ DB(mvOsPrintf("mvPexConfigRead: got : %x \n",pexData));
+
+ return pexData;
+
+}
+
+/*******************************************************************************
+* mvPexConfigWrite - Write to configuration space
+*
+* DESCRIPTION:
+* This function performs a 32 bit write to PEX configuration space.
+* It supports both type 0 and type 1 of Configuration Transactions
+* (local and over bridge). In order to write to local bus segment, use
+* bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers
+* will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+* pexIf - PEX interface number.
+* bus - PEX segment bus number.
+* dev - PEX device number.
+* func - Function number.
+* regOffs - Register offset.
+* data - 32bit data.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data)
+{
+#if defined(PCIE_VIRTUAL_BRIDGE_SUPPORT)
+ return mvPexVrtBrgConfigWrite (pexIf, bus, dev, func, regOff, data);
+}
+
+MV_STATUS mvPexHwConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data)
+{
+#endif
+ MV_U32 pexData = 0;
+ MV_U32 localDev,localBus;
+
+ /* Parameter checking */
+ if (PEX_DEFAULT_IF != pexIf)
+ {
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexConfigWrite: ERR. Invalid PEX interface %d\n",
+ pexIf);
+ return MV_ERROR;
+ }
+ }
+
+ if (dev >= MAX_PEX_DEVICES)
+ {
+ mvOsPrintf("mvPexConfigWrite: ERR. device number illigal %d\n",dev);
+ return MV_BAD_PARAM;
+ }
+
+ if (func >= MAX_PEX_FUNCS)
+ {
+ mvOsPrintf("mvPexConfigWrite: ERR. function number illigal %d\n", func);
+ return MV_ERROR;
+ }
+
+ if (bus >= MAX_PEX_BUSSES)
+ {
+ mvOsPrintf("mvPexConfigWrite: ERR. bus number illigal %d\n", bus);
+ return MV_ERROR;
+ }
+
+
+
+ localDev = mvPexLocalDevNumGet(pexIf);
+ localBus = mvPexLocalBusNumGet(pexIf);
+
+
+ /* in PCI Express we have only one device number other than ourselves*/
+ /* and this number is the first number we encounter
+ else than the localDev that can be any valid dev number*/
+ /* pex spec define return on config read/write on any device */
+ if (bus == localBus)
+ {
+
+ if (localDev == 0)
+ {
+ /* if local dev is 0 then the first number we encounter
+ after 0 is 1 */
+ if ((dev != 1)&&(dev != localDev))
+ {
+ return MV_ERROR;
+ }
+
+ }
+ else
+ {
+ /* if local dev is not 0 then the first number we encounter
+ is 0 */
+
+ if ((dev != 0)&&(dev != localDev))
+ {
+ return MV_ERROR;
+ }
+ }
+
+
+ }
+
+ /* if we are not accessing ourselves , then check the link */
+ if ((dev != localDev) || (bus != localBus) )
+ {
+ /* workarround */
+ /* when no link return MV_ERROR */
+
+ pexData = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+ if ((pexData & PXSR_DL_DOWN))
+ {
+ return MV_ERROR;
+ }
+
+ }
+
+ pexData =0;
+
+ /* Creating PEX address to be passed */
+ pexData |= (bus << PXCAR_BUS_NUM_OFFS);
+ pexData |= (dev << PXCAR_DEVICE_NUM_OFFS);
+ pexData |= (func << PXCAR_FUNC_NUM_OFFS);
+ pexData |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */
+ /* extended register space */
+ pexData |=(((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >>
+ PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS);
+ pexData |= PXCAR_CONFIG_EN;
+
+ DB(mvOsPrintf("mvPexConfigWrite: If=%x bus=%x func=%x dev=%x regOff=%x data=%x \n",
+ pexIf,bus,func,dev,regOff,data,pexData) );
+
+ /* Write the address to the PEX configuration address register */
+ MV_REG_WRITE(PEX_CFG_ADDR_REG(pexIf), pexData);
+
+ /* Clear CPU pipe. Important where CPU can perform OOO execution */
+ CPU_PIPE_FLUSH;
+
+ /* In order to let the PEX controller absorbed the address of the read */
+ /* transaction we perform a validity check that the address was written */
+ if(pexData != MV_REG_READ(PEX_CFG_ADDR_REG(pexIf)))
+ {
+ return MV_ERROR;
+ }
+
+ /* Write the Data passed to the PEX Data register */
+ MV_REG_WRITE(PEX_CFG_DATA_REG(pexIf), data);
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvPexMasterEnable - Enable/disale PEX interface master transactions.
+*
+* DESCRIPTION:
+* This function performs read modified write to PEX command status
+* (offset 0x4) to set/reset bit 2. After this bit is set, the PEX
+* master is allowed to gain ownership on the bus, otherwise it is
+* incapable to do so.
+*
+* INPUT:
+* pexIf - PEX interface number.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable)
+{
+ MV_U32 pexCommandStatus;
+ MV_U32 localBus;
+ MV_U32 localDev;
+
+ /* Parameter checking */
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexMasterEnable: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_ERROR;
+ }
+
+ localBus = mvPexLocalBusNumGet(pexIf);
+ localDev = mvPexLocalDevNumGet(pexIf);
+
+ pexCommandStatus = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,
+ PEX_STATUS_AND_COMMAND));
+
+
+ if (MV_TRUE == enable)
+ {
+ pexCommandStatus |= PXSAC_MASTER_EN;
+ }
+ else
+ {
+ pexCommandStatus &= ~PXSAC_MASTER_EN;
+ }
+
+
+ MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_STATUS_AND_COMMAND),
+ pexCommandStatus);
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPexSlaveEnable - Enable/disale PEX interface slave transactions.
+*
+* DESCRIPTION:
+* This function performs read modified write to PEX command status
+* (offset 0x4) to set/reset bit 0 and 1. After those bits are set,
+* the PEX slave is allowed to respond to PEX IO space access (bit 0)
+* and PEX memory space access (bit 1).
+*
+* INPUT:
+* pexIf - PEX interface number.
+* dev - PEX device number.
+* enable - Enable/disable parameter.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable)
+{
+ MV_U32 pexCommandStatus;
+ MV_U32 RegOffs;
+
+ /* Parameter checking */
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexSlaveEnable: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_BAD_PARAM;
+ }
+ if (dev >= MAX_PEX_DEVICES)
+ {
+ mvOsPrintf("mvPexLocalDevNumSet: ERR. device number illigal %d\n", dev);
+ return MV_BAD_PARAM;
+
+ }
+
+
+ RegOffs = PEX_STATUS_AND_COMMAND;
+
+ pexCommandStatus = mvPexConfigRead(pexIf, bus, dev, 0, RegOffs);
+
+ if (MV_TRUE == enable)
+ {
+ pexCommandStatus |= (PXSAC_IO_EN | PXSAC_MEM_EN);
+ }
+ else
+ {
+ pexCommandStatus &= ~(PXSAC_IO_EN | PXSAC_MEM_EN);
+ }
+
+ mvPexConfigWrite(pexIf, bus, dev, 0, RegOffs, pexCommandStatus);
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvPexLocalBusNumSet - Set PEX interface local bus number.
+*
+* DESCRIPTION:
+* This function sets given PEX interface its local bus number.
+* Note: In case the PEX interface is PEX-X, the information is read-only.
+*
+* INPUT:
+* pexIf - PEX interface number.
+* busNum - Bus number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_NOT_ALLOWED in case PEX interface is PEX-X.
+* MV_BAD_PARAM on bad parameters ,
+* otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum)
+{
+ MV_U32 pexStatus;
+ MV_U32 localBus;
+ MV_U32 localDev;
+
+
+ /* Parameter checking */
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexLocalBusNumSet: ERR. Invalid PEX interface %d\n",pexIf);
+ return MV_BAD_PARAM;
+ }
+ if (busNum >= MAX_PEX_BUSSES)
+ {
+ mvOsPrintf("mvPexLocalBusNumSet: ERR. bus number illigal %d\n", busNum);
+ return MV_ERROR;
+
+ }
+
+ localBus = mvPexLocalBusNumGet(pexIf);
+ localDev = mvPexLocalDevNumGet(pexIf);
+
+
+
+ pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+ pexStatus &= ~PXSR_PEX_BUS_NUM_MASK;
+
+ pexStatus |= (busNum << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK;
+
+ MV_REG_WRITE(PEX_STATUS_REG(pexIf), pexStatus);
+
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPexLocalBusNumGet - Get PEX interface local bus number.
+*
+* DESCRIPTION:
+* This function gets the local bus number of a given PEX interface.
+*
+* INPUT:
+* pexIf - PEX interface number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Local bus number.0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf)
+{
+ MV_U32 pexStatus;
+
+ /* Parameter checking */
+ if (PEX_DEFAULT_IF != pexIf)
+ {
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexLocalBusNumGet: ERR. Invalid PEX interface %d\n",pexIf);
+ return 0xFFFFFFFF;
+ }
+ }
+
+
+ pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+ pexStatus &= PXSR_PEX_BUS_NUM_MASK;
+
+ return (pexStatus >> PXSR_PEX_BUS_NUM_OFFS);
+
+}
+
+
+/*******************************************************************************
+* mvPexLocalDevNumSet - Set PEX interface local device number.
+*
+* DESCRIPTION:
+* This function sets given PEX interface its local device number.
+* Note: In case the PEX interface is PEX-X, the information is read-only.
+*
+* INPUT:
+* pexIf - PEX interface number.
+* devNum - Device number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_NOT_ALLOWED in case PEX interface is PEX-X.
+* MV_BAD_PARAM on bad parameters ,
+* otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum)
+{
+ MV_U32 pexStatus;
+ MV_U32 localBus;
+ MV_U32 localDev;
+
+ /* Parameter checking */
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexLocalDevNumSet: ERR. Invalid PEX interface %d\n",pexIf);
+ return MV_BAD_PARAM;
+ }
+ if (devNum >= MAX_PEX_DEVICES)
+ {
+ mvOsPrintf("mvPexLocalDevNumSet: ERR. device number illigal %d\n",
+ devNum);
+ return MV_BAD_PARAM;
+
+ }
+
+ localBus = mvPexLocalBusNumGet(pexIf);
+ localDev = mvPexLocalDevNumGet(pexIf);
+
+
+ pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+ pexStatus &= ~PXSR_PEX_DEV_NUM_MASK;
+
+ pexStatus |= (devNum << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK;
+
+ MV_REG_WRITE(PEX_STATUS_REG(pexIf), pexStatus);
+
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvPexLocalDevNumGet - Get PEX interface local device number.
+*
+* DESCRIPTION:
+* This function gets the local device number of a given PEX interface.
+*
+* INPUT:
+* pexIf - PEX interface number.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Local device number. 0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf)
+{
+ MV_U32 pexStatus;
+
+ /* Parameter checking */
+
+ if (PEX_DEFAULT_IF != pexIf)
+ {
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexLocalDevNumGet: ERR. Invalid PEX interface %d\n",
+ pexIf);
+ return 0xFFFFFFFF;
+ }
+ }
+
+ pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+ pexStatus &= PXSR_PEX_DEV_NUM_MASK;
+
+ return (pexStatus >> PXSR_PEX_DEV_NUM_OFFS);
+}
+
+MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value)
+{
+
+ MV_U32 regAddr;
+ if (pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexPhyRegRead: ERR. Invalid PEX interface %d\n", pexIf);
+ return;
+ }
+ regAddr = (BIT31 | ((regOffset & 0x3fff) << 16));
+ MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regAddr);
+ *value = MV_REG_READ(PEX_PHY_ACCESS_REG(pexIf));
+}
+
+
+MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value)
+{
+
+ MV_U32 regAddr;
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexPhyRegWrite: ERR. Invalid PEX interface %d\n", pexIf);
+ return;
+ }
+ regAddr = (((regOffset & 0x3fff) << 16) | value);
+ MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regAddr);
+}
+
+/*******************************************************************************
+* mvPexActiveStateLinkPMEnable
+*
+* DESCRIPTION:
+* Enable Active Link State Power Management
+*
+* INPUT:
+* pexIf - PEX interface number.
+* enable - MV_TRUE to enable ASPM, MV_FALSE to disable.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* MV_OK on success , MV_ERROR otherwise
+*
+*******************************************************************************/
+MV_STATUS mvPexActiveStateLinkPMEnable(MV_U32 pexIf, MV_BOOL enable)
+{
+ MV_U32 reg;
+
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexActiveStateLinkPMEnable: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_ERROR;
+ }
+
+ reg = MV_REG_READ(PEX_PWR_MNG_EXT_REG(pexIf)) & ~PXPMER_L1_ASPM_EN_MASK;
+ if(enable == MV_TRUE)
+ reg |= PXPMER_L1_ASPM_EN_MASK;
+ MV_REG_WRITE(PEX_PWR_MNG_EXT_REG(pexIf), reg);
+
+ /* Enable / Disable L0/1 entry */
+ reg = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG))
+ & ~PXLCSR_ASPM_CNT_MASK;
+ if(enable == MV_TRUE)
+ reg |= PXLCSR_ASPM_CNT_L0S_L1S_ENT_SUPP;
+ MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG), reg);
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPexForceX1
+*
+* DESCRIPTION:
+* shut down lanes 1-3 if recognize that attached to an x1 end-point
+* INPUT:
+* pexIf - PEX interface number.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* MV_OK on success , MV_ERROR otherwise
+*
+*******************************************************************************/
+MV_U32 mvPexForceX1(MV_U32 pexIf)
+{
+ MV_U32 regData = 0;
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexForceX1: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_BAD_PARAM;
+ }
+
+ regData = MV_REG_READ(PEX_CTRL_REG(pexIf)) & ~(PXCR_CONF_LINK_MASK) ;
+ regData |= PXCR_CONF_LINK_X1;
+
+ MV_REG_WRITE(PEX_CTRL_REG(pexIf), regData);
+ return MV_OK;
+}
+
+MV_BOOL mvPexIsPowerUp(MV_U32 pexIf)
+{
+ if(pexIf >= mvCtrlPexMaxIfGet())
+ {
+ mvOsPrintf("mvPexIsPowerUp: ERR. Invalid PEX interface %d\n", pexIf);
+ return MV_FALSE;
+ }
+ return mvCtrlPwrClckGet(PEX_UNIT_ID, pexIf);
+}
+
+
+MV_VOID mvPexPowerDown(MV_U32 pexIf)
+{
+ if ( (mvCtrlModelGet() == MV_78XX0_DEV_ID) ||
+ (mvCtrlModelGet() == MV_76100_DEV_ID) ||
+ (mvCtrlModelGet() == MV_78100_DEV_ID) ||
+ (mvCtrlModelGet() == MV_78200_DEV_ID) )
+ {
+ mvCtrlPwrClckSet(PEX_UNIT_ID, pexIf, MV_FALSE);
+ }
+ else
+ {
+ MV_REG_WRITE((0x41B00 -(pexIf)*0x10000), 0x20800087);
+ }
+}
+
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCPEXH
+#define __INCPEXH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "pex/mvPexRegs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+
+
+/* NOTE not supported in this driver:*/
+
+
+/* defines */
+/* The number of supported PEX interfaces depend on Marvell controller */
+/* device number. This device number ID is located on the PEX unit */
+/* configuration header. This creates a loop where calling PEX */
+/* configuration read/write routine results a call to get PEX configuration */
+/* information etc. This macro defines a default PEX interface. This PEX */
+/* interface is sure to exist. */
+#define PEX_DEFAULT_IF 0
+
+
+/* typedefs */
+/* The Marvell controller supports both root complex and end point devices */
+/* This enumeration describes the PEX type. */
+typedef enum _mvPexType
+{
+ MV_PEX_ROOT_COMPLEX, /* root complex device */
+ MV_PEX_END_POINT /* end point device */
+}MV_PEX_TYPE;
+
+typedef enum _mvPexWidth
+{
+ MV_PEX_WITDH_X1 = 1,
+ MV_PEX_WITDH_X2,
+ MV_PEX_WITDH_X3,
+ MV_PEX_WITDH_X4,
+ MV_PEX_WITDH_INVALID
+}MV_PEX_WIDTH;
+
+/* PEX Bar attributes */
+typedef struct _mvPexMode
+{
+ MV_PEX_TYPE pexType;
+ MV_PEX_WIDTH pexWidth;
+ MV_BOOL pexLinkUp;
+}MV_PEX_MODE;
+
+
+
+/* Global Functions prototypes */
+/* mvPexInit - Initialize PEX interfaces*/
+MV_STATUS mvPexHalInit(MV_U32 pexIf, MV_PEX_TYPE pexType);
+
+/* mvPexModeGet - Get Pex If mode */
+MV_U32 mvPexModeGet(MV_U32 pexIf,MV_PEX_MODE *pexMode);
+
+/* mvPexConfigRead - Read from configuration space */
+MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func,MV_U32 regOff);
+
+/* mvPexConfigWrite - Write to configuration space */
+MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data);
+
+/* mvPexMasterEnable - Enable/disale PEX interface master transactions.*/
+MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable);
+
+/* mvPexSlaveEnable - Enable/disale PEX interface slave transactions.*/
+MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable);
+
+/* mvPexLocalBusNumSet - Set PEX interface local bus number.*/
+MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum);
+
+/* mvPexLocalBusNumGet - Get PEX interface local bus number.*/
+MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf);
+
+/* mvPexLocalDevNumSet - Set PEX interface local device number.*/
+MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum);
+
+/* mvPexLocalDevNumGet - Get PEX interface local device number.*/
+MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf);
+/* mvPexForceX1 - Force PEX interface to X1 mode. */
+MV_U32 mvPexForceX1(MV_U32 pexIf);
+
+/* mvPexIsPowerUp - Is PEX interface Power up? */
+MV_BOOL mvPexIsPowerUp(MV_U32 pexIf);
+
+/* mvPexPowerDown - Power Down */
+MV_VOID mvPexPowerDown(MV_U32 pexIf);
+
+/* mvPexPowerUp - Power Up */
+MV_VOID mvPexPowerUp(MV_U32 pexIf);
+
+/* mvPexPhyRegRead - Pex phy read */
+MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value);
+
+/* mvPexPhyRegWrite - Pex phy write */
+MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value);
+
+MV_STATUS mvPexActiveStateLinkPMEnable(MV_U32 pexIf, MV_BOOL enable);
+
+#endif /* #ifndef __INCPEXH */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCPEXREGSH
+#define __INCPEXREGSH
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines */
+#define MAX_PEX_DEVICES 32
+#define MAX_PEX_FUNCS 8
+#define MAX_PEX_BUSSES 256
+
+
+
+/*********************************************************/
+/* PCI Express Configuration Cycles Generation Registers */
+/*********************************************************/
+
+#define PEX_CFG_ADDR_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x18F8)
+#define PEX_CFG_DATA_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x18FC)
+#define PEX_PHY_ACCESS_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1B00)
+/* PCI Express Configuration Address Register */
+/* PEX_CFG_ADDR_REG (PXCAR)*/
+
+#define PXCAR_REG_NUM_OFFS 2
+#define PXCAR_REG_NUM_MAX 0x3F
+#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << PXCAR_REG_NUM_OFFS)
+#define PXCAR_FUNC_NUM_OFFS 8
+#define PXCAR_FUNC_NUM_MAX 0x7
+#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << PXCAR_FUNC_NUM_OFFS)
+#define PXCAR_DEVICE_NUM_OFFS 11
+#define PXCAR_DEVICE_NUM_MAX 0x1F
+#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << PXCAR_DEVICE_NUM_OFFS)
+#define PXCAR_BUS_NUM_OFFS 16
+#define PXCAR_BUS_NUM_MAX 0xFF
+#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << PXCAR_BUS_NUM_OFFS)
+#define PXCAR_EXT_REG_NUM_OFFS 24
+#define PXCAR_EXT_REG_NUM_MAX 0xF
+
+/* in pci express register address is now the legacy register address (8 bits)
+with the new extended register address (more 4 bits) , below is the mask of
+the upper 4 bits of the full register address */
+
+#define PXCAR_REAL_EXT_REG_NUM_OFFS 8
+#define PXCAR_EXT_REG_NUM_MASK (PXCAR_EXT_REG_NUM_MAX << PXCAR_EXT_REG_NUM_OFFS)
+#define PXCAR_CONFIG_EN BIT31
+
+#define PXCAR_REAL_EXT_REG_NUM_OFFS 8
+#define PXCAR_REAL_EXT_REG_NUM_MASK (0xF << PXCAR_REAL_EXT_REG_NUM_OFFS)
+
+/* The traditional PCI spec defined 6-bit field to describe register offset.*/
+/* The new PCI Express extend the register offset by an extra 4-bits. */
+/* The below macro assign 10-bit register offset into the apprpreate */
+/* fields in the CFG_ADDR_REG */
+#define PXCAR_REG_OFFS_SET(regOffs) \
+ ( (regOff & PXCAR_REG_NUM_MASK) | \
+ ( ((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS) )
+
+/***********************************/
+/* PCI Express Interrupt registers */
+/***********************************/
+#define PEX_CAUSE_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1900)
+#define PEX_MASK_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1910)
+
+#define PXICR_TX_REQ_IN_DLDOWN_ERR BIT0 /* Transmit request while field */
+ /* <DLDown> of the PCI Express */
+/* PCI Express Interrupt Cause */
+/* PEX_INT_CAUSE_REG (PXICR)*/
+/* PEX_INT_MASK_REG*/
+/*
+NOTE:All bits except bits[27:24] are Read/Write Clear only. A cause bit sets
+upon an error event occurrence. A write of 0 clears the bit. A write of 1 has
+no affect. Bits[24:27} are set and cleared upon reception of interrupt
+emulation messages.
+
+Mask bit per cause bit. If a bit is set to 1, the corresponding event is
+enabled. Mask does not affect setting of the Interrupt Cause register bits;
+it only affects the assertion of the interrupt .*/
+
+
+#define PXICR_MDIS_CAUSE BIT1 /* Attempt to generate PCI transaction
+ while master is disabled */
+#define PXICR_ERR_WRTO_REG_CAUSE BIT3 /* Erroneous write attempt to
+ PCI Express internal register*/
+#define PXICR_HIT_DFLT_WIN_ERR BIT4 /* Hit Default Window Error */
+#define PXICR_RX_RAM_PAR_ERR BIT6 /* Rx RAM Parity Error */
+#define PXICR_TX_RAM_PAR_ERR BIT7 /* Tx RAM Parity Error */
+#define PXICR_COR_ERR_DET BIT8 /* Correctable Error Detected*/
+#define PXICR_NF_ERR_DET BIT9 /* Non-Fatal Error Detected*/
+#define PXICR_FERR_DET BIT10 /* Fatal Error Detected*/
+#define PXICR_DSTATE_CHANGE BIT11 /* Dstate Change Indication*/
+#define PXICR_BIST BIT12 /* PCI-Express BIST activated*/
+#define PXICR_FLW_CTRL_PROT BIT14 /* Flow Control Protocol Error */
+
+#define PXICR_RCV_UR_CA_ERR BIT15 /* Received UR or CA status. */
+#define PXICR_RCV_ERR_FATAL BIT16 /* Received ERR_FATAL message.*/
+#define PXICR_RCV_ERR_NON_FATAL BIT17 /* Received ERR_NONFATAL message*/
+#define PXICR_RCV_ERR_COR BIT18 /* Received ERR_COR message.*/
+#define PXICR_RCV_CRS BIT19 /* Received CRS completion status*/
+#define PXICR_SLV_HOT_RESET BIT20 /* Received Hot Reset Indication*/
+#define PXICR_SLV_DIS_LINK BIT21 /* Slave Disable Link Indication*/
+#define PXICR_SLV_LB BIT22 /* Slave Loopback Indication*/
+#define PXICR_LINK_FAIL BIT23 /* Link Failure indication.*/
+#define PXICR_RCV_INTA BIT24 /* IntA status.*/
+#define PXICR_RCV_INTB BIT25 /* IntB status.*/
+#define PXICR_RCV_INTC BIT26 /* IntC status.*/
+#define PXICR_RCV_INTD BIT27 /* IntD status.*/
+#define PXICR_RCV_PM_PME BIT28 /* Received PM_PME message. */
+
+
+/********************************************/
+/* PCI Express Control and Status Registers */
+/********************************************/
+#define PEX_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A00)
+#define PEX_STATUS_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A04)
+#define PEX_COMPLT_TMEOUT_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A10)
+#define PEX_PWR_MNG_EXT_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A18)
+#define PEX_FLOW_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A20)
+#define PEX_ACK_TMR_4X_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A30)
+#define PEX_ACK_TMR_1X_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A40)
+#define PEX_TL_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1AB0)
+
+
+#define PEX_RAM_PARITY_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A50)
+/* PCI Express Control Register */
+/* PEX_CTRL_REG (PXCR) */
+
+#define PXCR_CONF_LINK_OFFS 0
+#define PXCR_CONF_LINK_MASK (1 << PXCR_CONF_LINK_OFFS)
+#define PXCR_CONF_LINK_X4 (0 << PXCR_CONF_LINK_OFFS)
+#define PXCR_CONF_LINK_X1 (1 << PXCR_CONF_LINK_OFFS)
+#define PXCR_DEV_TYPE_CTRL_OFFS 1 /*PCI ExpressDevice Type Control*/
+#define PXCR_DEV_TYPE_CTRL_MASK BIT1
+#define PXCR_DEV_TYPE_CTRL_CMPLX (1 << PXCR_DEV_TYPE_CTRL_OFFS)
+#define PXCR_DEV_TYPE_CTRL_POINT (0 << PXCR_DEV_TYPE_CTRL_OFFS)
+#define PXCR_CFG_MAP_TO_MEM_EN BIT2 /* Configuration Header Mapping
+ to Memory Space Enable */
+
+#define PXCR_CFG_MAP_TO_MEM_EN BIT2 /* Configuration Header Mapping
+ to Memory Space Enable*/
+
+#define PXCR_RSRV1_OFFS 5
+#define PXCR_RSRV1_MASK (0x7 << PXCR_RSRV1_OFFS)
+#define PXCR_RSRV1_VAL (0x0 << PXCR_RSRV1_OFFS)
+
+#define PXCR_CONF_MAX_OUTSTND_OFFS 8 /*Maximum outstanding NP requests as a master*/
+#define PXCR_CONF_MAX_OUTSTND_MASK (0x3 << PXCR_CONF_MAX_OUTSTND_OFFS)
+
+
+#define PXCR_CONF_NFTS_OFFS 16 /*number of FTS Ordered-Sets*/
+#define PXCR_CONF_NFTS_MASK (0xff << PXCR_CONF_NFTS_OFFS)
+
+#define PXCR_CONF_MSTR_HOT_RESET BIT24 /*Master Hot-Reset.*/
+#define PXCR_CONF_MSTR_LB BIT26 /* Master Loopback */
+#define PXCR_CONF_MSTR_DIS_SCRMB BIT27 /* Master Disable Scrambling*/
+#define PXCR_CONF_DIRECT_DIS_SCRMB BIT28 /* Direct Disable Scrambling*/
+
+/* PCI Express Status Register */
+/* PEX_STATUS_REG (PXSR) */
+
+#define PXSR_DL_DOWN BIT0 /* DL_Down indication.*/
+
+#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */
+#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS)
+
+#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */
+#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS)
+
+#define PXSR_PEX_SLV_HOT_RESET BIT24 /* Slave Hot Reset Indication*/
+#define PXSR_PEX_SLV_DIS_LINK BIT25 /* Slave Disable Link Indication*/
+#define PXSR_PEX_SLV_LB BIT26 /* Slave Loopback Indication*/
+#define PXSR_PEX_SLV_DIS_SCRMB BIT27 /* Slave Disable Scrambling Indication*/
+
+
+/* PCI Express Completion Timeout Register */
+/* PEX_COMPLT_TMEOUT_REG (PXCTR)*/
+
+#define PXCTR_CMP_TO_THRSHLD_OFFS 0 /* Completion Timeout Threshold */
+#define PXCTR_CMP_TO_THRSHLD_MASK (0xffff << PXCTR_CMP_TO_THRSHLD_OFFS)
+
+/* PCI Express Power Management Extended Register */
+/* PEX_PWR_MNG_EXT_REG (PXPMER) */
+
+#define PXPMER_L1_ASPM_EN_OFFS 1
+#define PXPMER_L1_ASPM_EN_MASK (0x1 << PXPMER_L1_ASPM_EN_OFFS)
+
+/* PCI Express Flow Control Register */
+/* PEX_FLOW_CTRL_REG (PXFCR)*/
+
+#define PXFCR_PH_INIT_FC_OFFS 0 /*Posted Headers Flow Control Credit
+ Initial Value.*/
+#define PXFCR_PH_INIT_FC_MASK (0xff << PXFCR_PH_INIT_FC_OFFS)
+
+
+#define PXFCR_NPH_INIT_FC_OFFS 8 /* Classified Non-Posted Headers
+ Flow Control Credit Initial Value*/
+#define PXFCR_NPH_INIT_FC_MASK (0xff << PXFCR_NPH_INIT_FC_OFFS)
+
+#define PXFCR_CH_INIT_FC_OFFS 16 /* Completion Headers Flow Control
+ Credit Initial Value Infinite*/
+
+#define PXFCR_CH_INIT_FC_MASK (0xff << PXFCR_CH_INIT_FC_OFFS)
+
+#define PXFCR_FC_UPDATE_TO_OFFS 24 /* Flow Control Update Timeout */
+#define PXFCR_FC_UPDATE_TO_MASK (0xff << PXFCR_FC_UPDATE_TO_OFFS)
+
+/* PCI Express Acknowledge Timers (4X) Register */
+/* PEX_ACK_TMR_4X_REG (PXAT4R) */
+#define PXAT1R_ACK_LAT_TOX4_OFFS 0 /* Ack Latency Timer Timeout Value */
+#define PXAT1R_ACK_LAT_TOX4_MASK (0xffff << PXAT4R_ACK_LAT_TOX1_OFFS)
+#define PXAT1R_ACK_RPLY_TOX4_OFFS 16 /* Ack Replay Timer Timeout Value */
+#define PXAT1R_ACK_RPLY_TOX4_MASK (0xffff << PXAT1R_ACK_RPLY_TOX1_OFFS)
+
+/* PCI Express Acknowledge Timers (1X) Register */
+/* PEX_ACK_TMR_1X_REG (PXAT1R) */
+
+#define PXAT1R_ACK_LAT_TOX1_OFFS 0 /* Acknowledge Latency Timer Timeout
+ Value for 1X Link*/
+#define PXAT1R_ACK_LAT_TOX1_MASK (0xffff << PXAT1R_ACK_LAT_TOX1_OFFS)
+
+#define PXAT1R_ACK_RPLY_TOX1_OFFS 16 /* Acknowledge Replay Timer Timeout
+ Value for 1X*/
+#define PXAT1R_ACK_RPLY_TOX1_MASK (0xffff << PXAT1R_ACK_RPLY_TOX1_OFFS)
+
+
+/* PCI Express TL Control Register */
+/* PEX_TL_CTRL_REG (PXTCR) */
+
+#define PXTCR_TX_CMP_BUFF_NO_OFFS 8 /*Number of completion buffers in Tx*/
+#define PXTCR_TX_CMP_BUFF_NO_MASK (0xf << PXTCR_TX_CMP_BUFF_NO_OFFS)
+
+/* PCI Express Debug MAC Control Register */
+/* PEX_DEBUG_MAC_CTRL_REG (PXDMCR) */
+
+#define PXDMCR_LINKUP BIT4
+
+
+
+/**********************************************/
+/* PCI Express Configuration Header Registers */
+/**********************************************/
+#define PEX_CFG_DIRECT_ACCESS(pexIf,cfgReg) ((PEX_IF_BASE(pexIf)) + (cfgReg))
+
+#define PEX_DEVICE_AND_VENDOR_ID 0x000
+#define PEX_STATUS_AND_COMMAND 0x004
+#define PEX_CLASS_CODE_AND_REVISION_ID 0x008
+#define PEX_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE 0x00C
+#define PEX_MEMORY_BAR_BASE_ADDR(barNum) (0x010 + ((barNum) << 2))
+#define PEX_MV_BAR_BASE(barNum) (0x010 + (barNum) * 8)
+#define PEX_MV_BAR_BASE_HIGH(barNum) (0x014 + (barNum) * 8)
+#define PEX_BAR0_INTER_REG 0x010
+#define PEX_BAR0_INTER_REG_HIGH 0x014
+#define PEX_BAR1_REG 0x018
+#define PEX_BAR1_REG_HIGH 0x01C
+#define PEX_BAR2_REG 0x020
+#define PEX_BAR2_REG_HIGH 0x024
+
+#define PEX_SUBSYS_ID_AND_SUBSYS_VENDOR_ID 0x02C
+#define PEX_EXPANSION_ROM_BASE_ADDR_REG 0x030
+#define PEX_CAPABILTY_LIST_POINTER 0x034
+#define PEX_INTERRUPT_PIN_AND_LINE 0x03C
+
+/* capability list */
+#define PEX_POWER_MNG_CAPABILITY 0x040
+#define PEX_POWER_MNG_STATUS_CONTROL 0x044
+
+#define PEX_MSI_MESSAGE_CONTROL 0x050
+#define PEX_MSI_MESSAGE_ADDR 0x054
+#define PEX_MSI_MESSAGE_HIGH_ADDR 0x058
+#define PEX_MSI_MESSAGE_DATA 0x05C
+
+#define PEX_CAPABILITY_REG 0x60
+#define PEX_DEV_CAPABILITY_REG 0x64
+#define PEX_DEV_CTRL_STAT_REG 0x68
+#define PEX_LINK_CAPABILITY_REG 0x6C
+#define PEX_LINK_CTRL_STAT_REG 0x70
+
+#define PEX_ADV_ERR_RPRT_HDR_TRGT_REG 0x100
+#define PEX_UNCORRECT_ERR_STAT_REG 0x104
+#define PEX_UNCORRECT_ERR_MASK_REG 0x108
+#define PEX_UNCORRECT_ERR_SERVITY_REG 0x10C
+#define PEX_CORRECT_ERR_STAT_REG 0x110
+#define PEX_CORRECT_ERR_MASK_REG 0x114
+#define PEX_ADV_ERR_CAPABILITY_CTRL_REG 0x118
+#define PEX_HDR_LOG_FIRST_DWORD_REG 0x11C
+#define PEX_HDR_LOG_SECOND_DWORD_REG 0x120
+#define PEX_HDR_LOG_THIRD_DWORD_REG 0x124
+#define PEX_HDR_LOG_FOURTH_DWORD_REG 0x128
+
+
+
+/* PCI Express Device and Vendor ID Register*/
+/*PEX_DEVICE_AND_VENDOR_ID (PXDAVI)*/
+
+#define PXDAVI_VEN_ID_OFFS 0 /* Vendor ID */
+#define PXDAVI_VEN_ID_MASK (0xffff << PXDAVI_VEN_ID_OFFS)
+
+#define PXDAVI_DEV_ID_OFFS 16 /* Device ID */
+#define PXDAVI_DEV_ID_MASK (0xffff << PXDAVI_DEV_ID_OFFS)
+
+
+/* PCI Express Command and Status Register*/
+/*PEX_STATUS_AND_COMMAND (PXSAC)*/
+
+#define PXSAC_IO_EN BIT0 /* IO Enable */
+#define PXSAC_MEM_EN BIT1 /* Memory Enable */
+#define PXSAC_MASTER_EN BIT2 /* Master Enable */
+#define PXSAC_PERR_EN BIT6 /* Parity Errors Respond Enable */
+#define PXSAC_SERR_EN BIT8 /* Ability to assert SERR# line */
+#define PXSAC_INT_DIS BIT10 /* Interrupt Disable */
+#define PXSAC_INT_STAT BIT19 /* Interrupt Status */
+#define PXSAC_CAP_LIST BIT20 /* Capability List Support */
+#define PXSAC_MAS_DATA_PERR BIT24 /* Master Data Parity Error */
+#define PXSAC_SLAVE_TABORT BIT27 /* Signalled Target Abort */
+#define PXSAC_RT_ABORT BIT28 /* Recieved Target Abort */
+#define PXSAC_MABORT BIT29 /* Recieved Master Abort */
+#define PXSAC_SYSERR BIT30 /* Signalled system error */
+#define PXSAC_DET_PARERR BIT31 /* Detect Parity Error */
+
+
+/* PCI Express Class Code and Revision ID Register*/
+/*PEX_CLASS_CODE_AND_REVISION_ID (PXCCARI)*/
+
+#define PXCCARI_REVID_OFFS 0 /* Revision ID */
+#define PXCCARI_REVID_MASK (0xff << PXCCARI_REVID_OFFS)
+
+#define PXCCARI_FULL_CLASS_OFFS 8 /* Full Class Code */
+#define PXCCARI_FULL_CLASS_MASK (0xffffff << PXCCARI_FULL_CLASS_OFFS)
+
+#define PXCCARI_PROGIF_OFFS 8 /* Prog .I/F*/
+#define PXCCARI_PROGIF_MASK (0xff << PXCCARI_PROGIF_OFFS)
+
+#define PXCCARI_SUB_CLASS_OFFS 16 /* Sub Class*/
+#define PXCCARI_SUB_CLASS_MASK (0xff << PXCCARI_SUB_CLASS_OFFS)
+
+#define PXCCARI_BASE_CLASS_OFFS 24 /* Base Class*/
+#define PXCCARI_BASE_CLASS_MASK (0xff << PXCCARI_BASE_CLASS_OFFS)
+
+
+/* PCI Express BIST, Header Type and Cache Line Size Register*/
+/*PEX_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE (PXBHTLTCL)*/
+
+#define PXBHTLTCL_CACHELINE_OFFS 0 /* Specifies the cache line size */
+#define PXBHTLTCL_CACHELINE_MASK (0xff << PXBHTLTCL_CACHELINE_OFFS)
+
+#define PXBHTLTCL_HEADTYPE_FULL_OFFS 16 /* Full Header Type */
+#define PXBHTLTCL_HEADTYPE_FULL_MASK (0xff << PXBHTLTCL_HEADTYPE_FULL_OFFS)
+
+#define PXBHTLTCL_MULTI_FUNC BIT23 /* Multi/Single function */
+
+#define PXBHTLTCL_HEADER_OFFS 16 /* Header type */
+#define PXBHTLTCL_HEADER_MASK (0x7f << PXBHTLTCL_HEADER_OFFS)
+#define PXBHTLTCL_HEADER_STANDARD (0x0 << PXBHTLTCL_HEADER_OFFS)
+#define PXBHTLTCL_HEADER_PCI2PCI_BRIDGE (0x1 << PXBHTLTCL_HEADER_OFFS)
+
+
+#define PXBHTLTCL_BISTCOMP_OFFS 24 /* BIST Completion Code */
+#define PXBHTLTCL_BISTCOMP_MASK (0xf << PXBHTLTCL_BISTCOMP_OFFS)
+
+#define PXBHTLTCL_BISTACT BIT30 /* BIST Activate bit */
+#define PXBHTLTCL_BISTCAP BIT31 /* BIST Capable Bit */
+#define PXBHTLTCL_BISTCAP_OFFS 31
+#define PXBHTLTCL_BISTCAP_MASK BIT31
+#define PXBHTLTCL_BISTCAP_VAL 0
+
+
+/* PCI Express Subsystem Device and Vendor ID */
+/*PEX_SUBSYS_ID_AND_SUBSYS_VENDOR_ID (PXSIASVI)*/
+
+#define PXSIASVI_VENID_OFFS 0 /* Subsystem Manufacturer Vendor ID Number */
+#define PXSIASVI_VENID_MASK (0xffff << PXSIASVI_VENID_OFFS)
+
+#define PXSIASVI_DEVID_OFFS 16 /* Subsystem Device ID Number */
+#define PXSIASVI_DEVID_MASK (0xffff << PXSIASVI_DEVID_OFFS)
+
+
+/* PCI Express Capability List Pointer Register*/
+/*PEX_CAPABILTY_LIST_POINTER (PXCLP)*/
+
+#define PXCLP_CAPPTR_OFFS 0 /* Capability List Pointer */
+#define PXCLP_CAPPTR_MASK (0xff << PXCLP_CAPPTR_OFFS)
+
+/* PCI Express Interrupt Pin and Line Register */
+/*PEX_INTERRUPT_PIN_AND_LINE (PXIPAL)*/
+
+#define PXIPAL_INTLINE_OFFS 0 /* Interrupt line (IRQ) */
+#define PXIPAL_INTLINE_MASK (0xff << PXIPAL_INTLINE_OFFS)
+
+#define PXIPAL_INTPIN_OFFS 8 /* interrupt pin (A,B,C,D) */
+#define PXIPAL_INTPIN_MASK (0xff << PXIPAL_INTPIN_OFFS)
+
+
+/* PCI Express Power Management Capability Header Register*/
+/*PEX_POWER_MNG_CAPABILITY (PXPMC)*/
+
+#define PXPMC_CAP_ID_OFFS 0 /* Capability ID */
+#define PXPMC_CAP_ID_MASK (0xff << PXPMC_CAP_ID_OFFS)
+
+#define PXPMC_NEXT_PTR_OFFS 8 /* Next Item Pointer */
+#define PXPMC_NEXT_PTR_MASK (0xff << PXPMC_NEXT_PTR_OFFS)
+
+#define PXPMC_PMC_VER_OFFS 16 /* PCI Power Management Capability Version*/
+#define PXPMC_PMC_VER_MASK (0x7 << PXPMC_PMC_VER_OFFS)
+
+#define PXPMC_DSI BIT21/* Device Specific Initialization */
+
+#define PXPMC_AUX_CUR_OFFS 22 /* Auxiliary Current Requirements */
+#define PXPMC_AUX_CUR_MASK (0x7 << PXPMC_AUX_CUR_OFFS)
+
+#define PXPMC_D1_SUP BIT25 /* D1 Power Management support*/
+
+#define PXPMC_D2_SUP BIT26 /* D2 Power Management support*/
+
+#define PXPMC_PME_SUP_OFFS 27 /* PM Event generation support*/
+#define PXPMC_PME_SUP_MASK (0x1f << PXPMC_PME_SUP_OFFS)
+
+/* PCI Express Power Management Control and Status Register*/
+/*PEX_POWER_MNG_STATUS_CONTROL (PXPMSC)*/
+
+#define PXPMSC_PM_STATE_OFFS 0 /* Power State */
+#define PXPMSC_PM_STATE_MASK (0x3 << PXPMSC_PM_STATE_OFFS)
+#define PXPMSC_PM_STATE_D0 (0x0 << PXPMSC_PM_STATE_OFFS)
+#define PXPMSC_PM_STATE_D1 (0x1 << PXPMSC_PM_STATE_OFFS)
+#define PXPMSC_PM_STATE_D2 (0x2 << PXPMSC_PM_STATE_OFFS)
+#define PXPMSC_PM_STATE_D3 (0x3 << PXPMSC_PM_STATE_OFFS)
+
+#define PXPMSC_PME_EN BIT8/* PM_PME Message Generation Enable */
+
+#define PXPMSC_PM_DATA_SEL_OFFS 9 /* Data Select*/
+#define PXPMSC_PM_DATA_SEL_MASK (0xf << PXPMSC_PM_DATA_SEL_OFFS)
+
+#define PXPMSC_PM_DATA_SCALE_OFFS 13 /* Data Scale */
+#define PXPMSC_PM_DATA_SCALE_MASK (0x3 << PXPMSC_PM_DATA_SCALE_OFFS)
+
+#define PXPMSC_PME_STAT BIT15/* PME Status */
+
+#define PXPMSC_PM_DATA_OFFS 24 /* State Data */
+#define PXPMSC_PM_DATA_MASK (0xff << PXPMSC_PM_DATA_OFFS)
+
+
+/* PCI Express MSI Message Control Register*/
+/*PEX_MSI_MESSAGE_CONTROL (PXMMC)*/
+
+#define PXMMC_CAP_ID_OFFS 0 /* Capability ID */
+#define PXMMC_CAP_ID_MASK (0xff << PXMMC_CAP_ID_OFFS)
+
+#define PXMMC_NEXT_PTR_OFFS 8 /* Next Item Pointer */
+#define PXMMC_NEXT_PTR_MASK (0xff << PXMMC_NEXT_PTR_OFFS)
+
+#define PXMMC_MSI_EN BIT18 /* MSI Enable */
+
+#define PXMMC_MULTI_CAP_OFFS 17 /* Multiple Message Capable */
+#define PXMMC_MULTI_CAP_MASK (0x7 << PXMMC_MULTI_CAP_OFFS)
+
+#define PXMMC_MULTI_EN_OFFS 20 /* Multiple Messages Enable */
+#define PXMMC_MULTI_EN_MASK (0x7 << PXMMC_MULTI_EN_OFFS)
+
+#define PXMMC_ADDR64 BIT23 /* 64-bit Addressing Capable */
+
+
+/* PCI Express MSI Message Address Register*/
+/*PEX_MSI_MESSAGE_ADDR (PXMMA)*/
+
+#define PXMMA_MSI_ADDR_OFFS 2 /* Message Address corresponds to
+ Address[31:2] of the MSI MWr TLP*/
+#define PXMMA_MSI_ADDR_MASK (0x3fffffff << PXMMA_MSI_ADDR_OFFS)
+
+
+/* PCI Express MSI Message Address (High) Register */
+/*PEX_MSI_MESSAGE_HIGH_ADDR (PXMMHA)*/
+
+#define PXMMA_MSI_ADDR_H_OFFS 0 /* Message Upper Address corresponds to
+ Address[63:32] of the MSI MWr TLP*/
+#define PXMMA_MSI_ADDR_H_MASK (0xffffffff << PXMMA_MSI_ADDR_H_OFFS )
+
+
+/* PCI Express MSI Message Data Register*/
+/*PEX_MSI_MESSAGE_DATA (PXMMD)*/
+
+#define PXMMD_MSI_DATA_OFFS 0 /* Message Data */
+#define PXMMD_MSI_DATA_MASK (0xffff << PXMMD_MSI_DATA_OFFS )
+
+
+/* PCI Express Capability Register*/
+/*PEX_CAPABILITY_REG (PXCR)*/
+
+#define PXCR_CAP_ID_OFFS 0 /* Capability ID*/
+#define PXCR_CAP_ID_MASK (0xff << PXCR_CAP_ID_OFFS)
+
+#define PXCR_NEXT_PTR_OFFS 8 /* Next Item Pointer*/
+#define PXCR_NEXT_PTR_MASK (0xff << PXCR_NEXT_PTR_OFFS)
+
+#define PXCR_CAP_VER_OFFS 16 /* Capability Version*/
+#define PXCR_CAP_VER_MASK (0xf << PXCR_CAP_VER_OFFS)
+
+#define PXCR_DEV_TYPE_OFFS 20 /* Device/Port Type*/
+#define PXCR_DEV_TYPE_MASK (0xf << PXCR_DEV_TYPE_OFFS)
+
+#define PXCR_SLOT_IMP BIT24 /* Slot Implemented*/
+
+#define PXCR_INT_MSG_NUM_OFFS 25 /* Interrupt Message Number*/
+#define PXCR_INT_MSG_NUM_MASK (0x1f << PXCR_INT_MSG_NUM_OFFS)
+
+
+/* PCI Express Device Capabilities Register */
+/*PEX_DEV_CAPABILITY_REG (PXDCR)*/
+
+#define PXDCR_MAX_PLD_SIZE_SUP_OFFS 0 /* Maximum Payload Size Supported*/
+#define PXDCR_MAX_PLD_SIZE_SUP_MASK (0x7 << PXDCR_MAX_PLD_SIZE_SUP_OFFS)
+
+#define PXDCR_EP_L0S_ACC_LAT_OFFS 6/* Endpoint L0s Acceptable Latency*/
+#define PXDCR_EP_L0S_ACC_LAT_MASK (0x7 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_64NS_LESS (0x0 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_64NS_128NS (0x1 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_128NS_256NS (0x2 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_256NS_512NS (0x3 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_512NS_1US (0x4 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_1US_2US (0x5 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_2US_4US (0x6 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_4US_MORE (0x7 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+
+#define PXDCR_EP_L1_ACC_LAT_OFFS 9 /* Endpoint L1 Acceptable Latency*/
+#define PXDCR_EP_L1_ACC_LAT_MASK (0x7 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXDCR_EP_L1_ACC_LAT_64NS_LESS (0x0 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXDCR_EP_L1_ACC_LAT_64NS_128NS (0x1 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXDCR_EP_L1_ACC_LAT_128NS_256NS (0x2 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXDCR_EP_L1_ACC_LAT_256NS_512NS (0x3 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXDCR_EP_L1_ACC_LAT_512NS_1US (0x4 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXDCR_EP_L1_ACC_LAT_1US_2US (0x5 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXDCR_EP_L1_ACC_LAT_2US_4US (0x6 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXDCR_EP_L1_ACC_LAT_4US_MORE (0x7 << PXDCR_EP_L1_ACC_LAT_OFFS)
+
+
+#define PXDCR_ATT_BUT_PRS_OFFS 12 /* Attention Button Present*/
+#define PXDCR_ATT_BUT_PRS_MASK BIT12
+#define PXDCR_ATT_BUT_PRS_IMPLEMENTED BIT12
+
+#define PXDCR_ATT_IND_PRS_OFFS 13 /* Attention Indicator Present*/
+#define PXDCR_ATT_IND_PRS_MASK BIT13
+#define PXDCR_ATT_IND_PRS_IMPLEMENTED BIT13
+
+#define PXDCR_PWR_IND_PRS_OFFS 14/* Power Indicator Present*/
+#define PXDCR_PWR_IND_PRS_MASK BIT14
+#define PXDCR_PWR_IND_PRS_IMPLEMENTED BIT14
+
+#define PXDCR_CAP_SPL_VAL_OFFS 18 /*Captured Slot Power Limit
+ Value*/
+#define PXDCR_CAP_SPL_VAL_MASK (0xff << PXDCR_CAP_SPL_VAL_OFFS)
+
+#define PXDCR_CAP_SP_LSCL_OFFS 26 /* Captured Slot Power Limit
+ Scale */
+#define PXDCR_CAP_SP_LSCL_MASK (0x3 << PXDCR_CAP_SP_LSCL_OFFS)
+
+/* PCI Express Device Control Status Register */
+/*PEX_DEV_CTRL_STAT_REG (PXDCSR)*/
+
+#define PXDCSR_COR_ERR_REP_EN BIT0 /* Correctable Error Reporting Enable*/
+#define PXDCSR_NF_ERR_REP_EN BIT1 /* Non-Fatal Error Reporting Enable*/
+#define PXDCSR_F_ERR_REP_EN BIT2 /* Fatal Error Reporting Enable*/
+#define PXDCSR_UR_REP_EN BIT3 /* Unsupported Request (UR)
+ Reporting Enable*/
+#define PXDCSR_EN_RO BIT4 /* Enable Relaxed Ordering*/
+
+#define PXDCSR_MAX_PLD_SZ_OFFS 5 /* Maximum Payload Size*/
+#define PXDCSR_MAX_PLD_SZ_MASK (0x7 << PXDCSR_MAX_PLD_SZ_OFFS)
+#define PXDCSR_MAX_PLD_SZ_128B (0x0 << PXDCSR_MAX_PLD_SZ_OFFS)
+#define PXDCSR_EN_NS BIT11 /* Enable No Snoop*/
+
+#define PXDCSR_MAX_RD_RQ_SZ_OFFS 12 /* Maximum Read Request Size*/
+#define PXDCSR_MAX_RD_RQ_SZ_MASK (0x7 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_128B (0x0 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_256B (0x1 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_512B (0x2 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_1KB (0x3 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_2KB (0x4 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_4KB (0x5 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+
+#define PXDCSR_COR_ERR_DET BIT16 /* Correctable Error Detected*/
+#define PXDCSR_NF_ERR_DET BIT17 /* Non-Fatal Error Detected.*/
+#define PXDCSR_F_ERR_DET BIT18 /* Fatal Error Detected.*/
+#define PXDCSR_UR_DET BIT19 /* Unsupported Request Detected */
+#define PXDCSR_AUX_PWR_DET BIT20 /* Reserved*/
+
+#define PXDCSR_TRANS_PEND_OFFS 21 /* Transactions Pending*/
+#define PXDCSR_TRANS_PEND_MASK BIT21
+#define PXDCSR_TRANS_PEND_NOT_COMPLETED (0x1 << PXDCSR_TRANS_PEND_OFFS)
+
+
+/* PCI Express Link Capabilities Register*/
+/*PEX_LINK_CAPABILITY_REG (PXLCR)*/
+
+#define PXLCR_MAX_LINK_SPD_OFFS 0 /* Maximum Link Speed*/
+#define PXLCR_MAX_LINK_SPD_MASK (0xf << PXLCR_MAX_LINK_SPD_OFFS)
+
+#define PXLCR_MAX_LNK_WDTH_OFFS 3 /* Maximum Link Width*/
+#define PXLCR_MAX_LNK_WDTH_MASK (0x3f << PXLCR_MAX_LNK_WDTH_OFFS)
+
+#define PXLCR_ASPM_SUP_OFFS 10 /* Active State Link PM Support*/
+#define PXLCR_ASPM_SUP_MASK (0x3 << PXLCR_ASPM_SUP_OFFS)
+
+#define PXLCR_L0S_EXT_LAT_OFFS 12 /* L0s Exit Latency*/
+#define PXLCR_L0S_EXT_LAT_MASK (0x7 << PXLCR_L0S_EXT_LAT_OFFS)
+#define PXLCR_L0S_EXT_LAT_64NS_LESS (0x0 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXLCR_L0S_EXT_LAT_64NS_128NS (0x1 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXLCR_L0S_EXT_LAT_128NS_256NS (0x2 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXLCR_L0S_EXT_LAT_256NS_512NS (0x3 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXLCR_L0S_EXT_LAT_512NS_1US (0x4 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXLCR_L0S_EXT_LAT_1US_2US (0x5 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXLCR_L0S_EXT_LAT_2US_4US (0x6 << PXDCR_EP_L1_ACC_LAT_OFFS)
+
+#define PXLCR_POR_TNUM_OFFS 24 /* Port Number */
+#define PXLCR_POR_TNUM_MASK (0xff << PXLCR_POR_TNUM_OFFS)
+
+/* PCI Express Link Control Status Register */
+/*PEX_LINK_CTRL_STAT_REG (PXLCSR)*/
+
+#define PXLCSR_ASPM_CNT_OFFS 0 /* Active State Link PM Control */
+#define PXLCSR_ASPM_CNT_MASK (0x3 << PXLCSR_ASPM_CNT_OFFS)
+#define PXLCSR_ASPM_CNT_DISABLED (0x0 << PXLCSR_ASPM_CNT_OFFS)
+#define PXLCSR_ASPM_CNT_L0S_ENT_SUPP (0x1 << PXLCSR_ASPM_CNT_OFFS)
+#define PXLCSR_ASPM_CNT_L1S_ENT_SUPP (0x2 << PXLCSR_ASPM_CNT_OFFS)
+#define PXLCSR_ASPM_CNT_L0S_L1S_ENT_SUPP (0x3 << PXLCSR_ASPM_CNT_OFFS)
+
+#define PXLCSR_RCB_OFFS 3 /* Read Completion Boundary */
+#define PXLCSR_RCB_MASK BIT3
+#define PXLCSR_RCB_64B (0 << PXLCSR_RCB_OFFS)
+#define PXLCSR_RCB_128B (1 << PXLCSR_RCB_OFFS)
+
+#define PXLCSR_LNK_DIS BIT4 /* Link Disable */
+#define PXLCSR_RETRN_LNK BIT5 /* Retrain Link */
+#define PXLCSR_CMN_CLK_CFG BIT6 /* Common Clock Configuration */
+#define PXLCSR_EXTD_SNC BIT7 /* Extended Sync */
+
+#define PXLCSR_LNK_SPD_OFFS 16 /* Link Speed */
+#define PXLCSR_LNK_SPD_MASK (0xf << PXLCSR_LNK_SPD_OFFS)
+
+#define PXLCSR_NEG_LNK_WDTH_OFFS 20 /* Negotiated Link Width */
+#define PXLCSR_NEG_LNK_WDTH_MASK (0x3f << PXLCSR_NEG_LNK_WDTH_OFFS)
+#define PXLCSR_NEG_LNK_WDTH_X1 (0x1 << PXLCSR_NEG_LNK_WDTH_OFFS)
+
+#define PXLCSR_LNK_TRN BIT27 /* Link Training */
+
+#define PXLCSR_SLT_CLK_CFG_OFFS 28 /* Slot Clock Configuration */
+#define PXLCSR_SLT_CLK_CFG_MASK BIT28
+#define PXLCSR_SLT_CLK_CFG_INDPNT (0x0 << PXLCSR_SLT_CLK_CFG_OFFS)
+#define PXLCSR_SLT_CLK_CFG_REF (0x1 << PXLCSR_SLT_CLK_CFG_OFFS)
+
+/* PCI Express Advanced Error Report Header Register */
+/*PEX_ADV_ERR_RPRT_HDR_TRGT_REG (PXAERHTR)*/
+
+/* PCI Express Uncorrectable Error Status Register*/
+/*PEX_UNCORRECT_ERR_STAT_REG (PXUESR)*/
+
+/* PCI Express Uncorrectable Error Mask Register */
+/*PEX_UNCORRECT_ERR_MASK_REG (PXUEMR)*/
+
+/* PCI Express Uncorrectable Error Severity Register */
+/*PEX_UNCORRECT_ERR_SERVITY_REG (PXUESR)*/
+
+/* PCI Express Correctable Error Status Register */
+/*PEX_CORRECT_ERR_STAT_REG (PXCESR)*/
+
+/* PCI Express Correctable Error Mask Register */
+/*PEX_CORRECT_ERR_MASK_REG (PXCEMR)*/
+
+/* PCI Express Advanced Error Capability and Control Register*/
+/*PEX_ADV_ERR_CAPABILITY_CTRL_REG (PXAECCR)*/
+
+/* PCI Express Header Log First DWORD Register*/
+/*PEX_HDR_LOG_FIRST_DWORD_REG (PXHLFDR)*/
+
+/* PCI Express Header Log Second DWORD Register*/
+/*PEX_HDR_LOG_SECOND_DWORD_REG (PXHLSDR)*/
+
+/* PCI Express Header Log Third DWORD Register*/
+/*PEX_HDR_LOG_THIRD_DWORD_REG (PXHLTDR)*/
+
+/* PCI Express Header Log Fourth DWORD Register*/
+/*PEX_HDR_LOG_FOURTH_DWORD_REG (PXHLFDR)*/
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* #ifndef __INCPEXREGSH */
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvPex.h"
+
+//#define MV_DEBUG
+/* defines */
+#ifdef MV_DEBUG
+ #define DB(x) x
+#else
+ #define DB(x)
+#endif
+
+/* locals */
+typedef struct
+{
+ MV_U32 data;
+ MV_U32 mask;
+}PEX_HEADER_DATA;
+
+/* local function forwad decleration */
+MV_U32 mvPexHwConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func,
+ MV_U32 regOff);
+MV_STATUS mvPexHwConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data);
+void resetPexConfig(MV_U32 pexIf, MV_U32 bus, MV_U32 dev);
+
+
+PEX_HEADER_DATA configHdr[16] =
+{
+{0x888811ab, 0x00000000}, /*[device ID, vendor ID] */
+{0x00100007, 0x0000ffff}, /*[status register, command register] */
+{0x0604000e, 0x00000000}, /*[programming interface, sub class code, class code, revision ID] */
+{0x00010008, 0x00000000}, /*[BIST, header type, latency time, cache line] */
+{0x00000000, 0x00000000}, /*[base address 0] */
+{0x00000000, 0x00000000}, /*[base address 1] */
+{0x00000000, 0x00ffffff}, /*[secondary latency timersubordinate bus number, secondary bus number, primary bus number] */
+{0x0000f101, 0x00000000}, /*[secondary status ,IO limit, IO base] */
+{0x9ff0a000, 0x00000000}, /*[memory limit, memory base] */
+{0x0001fff1, 0x00000000}, /*[prefetch memory limit, prefetch memory base] */
+{0xffffffff, 0x00000000}, /*[prefetch memory base upper] */
+{0x00000000, 0x00000000}, /*[prefetch memory limit upper] */
+{0xeffff000, 0x00000000}, /*[IO limit upper 16 bits, IO base upper 16 bits] */
+{0x00000000, 0x00000000}, /*[reserved, capability pointer] */
+{0x00000000, 0x00000000}, /*[expansion ROM base address] */
+{0x00000000, 0x000000FF}, /*[bridge control, interrupt pin, interrupt line] */
+};
+
+
+#define HEADER_WRITE(data, offset) configHdr[offset/4].data = ((configHdr[offset/4].data & ~configHdr[offset/4].mask) | \
+ (data & configHdr[offset/4].mask))
+#define HEADER_READ(offset) configHdr[offset/4].data
+
+/*******************************************************************************
+* mvVrtBrgPexInit - Initialize PEX interfaces
+*
+* DESCRIPTION:
+*
+* This function is responsible of intialization of the Pex Interface , It
+* configure the Pex Bars and Windows in the following manner:
+*
+* Assumptions :
+* Bar0 is always internal registers bar
+* Bar1 is always the DRAM bar
+* Bar2 is always the Device bar
+*
+* 1) Sets the Internal registers bar base by obtaining the base from
+* the CPU Interface
+* 2) Sets the DRAM bar base and size by getting the base and size from
+* the CPU Interface when the size is the sum of all enabled DRAM
+* chip selects and the base is the base of CS0 .
+* 3) Sets the Device bar base and size by getting these values from the
+* CPU Interface when the base is the base of the lowest base of the
+* Device chip selects, and the
+*
+*
+* INPUT:
+*
+* pexIf - PEX interface number.
+*
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM
+*
+*******************************************************************************/
+MV_STATUS mvPexVrtBrgInit(MV_U32 pexIf)
+{
+ /* reset PEX tree to recover previous U-boot/Boot configurations */
+ MV_U32 localBus = mvPexLocalBusNumGet(pexIf);
+
+
+ resetPexConfig(pexIf, localBus, 1);
+ return MV_OK;
+}
+
+
+MV_U32 mvPexVrtBrgConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func,
+ MV_U32 regOff)
+{
+
+ MV_U32 localBus = mvPexLocalBusNumGet(pexIf);
+ MV_U32 localDev = mvPexLocalDevNumGet(pexIf);
+ MV_U32 val;
+ if(bus == localBus)
+ {
+ if(dev > 1)
+ {
+/* on the local device allow only device #0 & #1 */
+ return 0xffffffff;
+ }
+ else
+ if (dev == localDev)
+ {
+ /* read the memory controller registers */
+ return mvPexHwConfigRead (pexIf, bus, dev, func, regOff);
+ }
+ else
+ {
+ /* access the virtual brg header */
+ return HEADER_READ(regOff);
+ }
+ }
+ else
+ if(bus == (localBus + 1))
+ {
+ /* access the device behind the virtual bridge */
+ if((dev == localDev) || (dev > 1))
+ {
+ return 0xffffffff;
+ }
+ else
+ {
+ /* access the device behind the virtual bridge, in this case
+ * change the bus number to the local bus number in order to
+ * generate type 0 config cycle
+ */
+ mvPexLocalBusNumSet(pexIf, bus);
+ mvPexLocalDevNumSet(pexIf, 1);
+ val = mvPexHwConfigRead (pexIf, bus, 0, func, regOff);
+ mvPexLocalBusNumSet(pexIf, localBus);
+ mvPexLocalDevNumSet(pexIf, localDev);
+ return val;
+ }
+ }
+ /* for all other devices use the HW function to get the
+ * requested registers
+ */
+ mvPexLocalDevNumSet(pexIf, 1);
+ val = mvPexHwConfigRead (pexIf, bus, dev, func, regOff);
+ mvPexLocalDevNumSet(pexIf, localDev);
+ return val;
+}
+
+
+MV_STATUS mvPexVrtBrgConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data)
+{
+ MV_U32 localBus = mvPexLocalBusNumGet(pexIf);
+ MV_U32 localDev = mvPexLocalDevNumGet(pexIf);
+ MV_STATUS status;
+
+ if(bus == localBus)
+ {
+ if(dev > 1)
+ {
+ /* on the local device allow only device #0 & #1 */
+ return MV_ERROR;
+ }
+ else
+ if (dev == localDev)
+ {
+ /* read the memory controller registers */
+ return mvPexHwConfigWrite (pexIf, bus, dev, func, regOff, data);
+ }
+ else
+ {
+ /* access the virtual brg header */
+ HEADER_WRITE(data, regOff);
+ return MV_OK;
+ }
+ }
+ else
+ if(bus == (localBus + 1))
+ {
+ /* access the device behind the virtual bridge */
+ if((dev == localDev) || (dev > 1))
+ {
+ return MV_ERROR;
+ }
+ else
+ {
+ /* access the device behind the virtual bridge, in this case
+ * change the bus number to the local bus number in order to
+ * generate type 0 config cycle
+ */
+ //return mvPexHwConfigWrite (pexIf, localBus, dev, func, regOff, data);
+ mvPexLocalBusNumSet(pexIf, bus);
+ mvPexLocalDevNumSet(pexIf, 1);
+ status = mvPexHwConfigWrite (pexIf, bus, 0, func, regOff, data);
+ mvPexLocalBusNumSet(pexIf, localBus);
+ mvPexLocalDevNumSet(pexIf, localDev);
+ return status;
+
+ }
+ }
+ /* for all other devices use the HW function to get the
+ * requested registers
+ */
+ mvPexLocalDevNumSet(pexIf, 1);
+ status = mvPexHwConfigWrite (pexIf, bus, dev, func, regOff, data);
+ mvPexLocalDevNumSet(pexIf, localDev);
+ return status;
+}
+
+
+
+
+void resetPexConfig(MV_U32 pexIf, MV_U32 bus, MV_U32 dev)
+{
+ MV_U32 tData;
+ MV_U32 i;
+
+ /* restore the PEX configuration to initialization state */
+ /* in case PEX P2P call recursive and reset config */
+ tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x0);
+ if(tData != 0xffffffff)
+ {
+ /* agent had been found - check whether P2P */
+ tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x8);
+ if((tData & 0xffff0000) == 0x06040000)
+ {/* P2P */
+ /* get the sec bus and the subordinate */
+ MV_U32 secBus;
+ tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x18);
+ secBus = ((tData >> 8) & 0xff);
+ /* now scan on sec bus */
+ for(i = 0;i < 0xff;i++)
+ {
+ resetPexConfig(pexIf, secBus, i);
+ }
+ /* now reset this device */
+ DB(mvOsPrintf("Reset bus %d dev %d\n", bus, dev));
+ mvPexHwConfigWrite(pexIf, bus, dev, 0x0, 0x18, 0x0);
+ DB(mvOsPrintf("Reset bus %d dev %d\n", bus, dev));
+ }
+ }
+}
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCVRTBRGPEXH
+#define __INCVRTBRGPEXH
+
+
+/* Global Functions prototypes */
+/* mvPexInit - Initialize PEX interfaces*/
+MV_STATUS mvPexVrtBrgInit(MV_U32 pexIf);
+
+/* mvPexConfigRead - Read from configuration space */
+MV_U32 mvPexVrtBrgConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func,MV_U32 regOff);
+
+/* mvPexConfigWrite - Write to configuration space */
+MV_STATUS mvPexVrtBrgConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+ MV_U32 func, MV_U32 regOff, MV_U32 data);
+
+
+#endif /* #ifndef __INCPEXH */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#include "mvOs.h"
+#include "sflash/mvSFlash.h"
+#include "sflash/mvSFlashSpec.h"
+#include "spi/mvSpi.h"
+#include "spi/mvSpiCmnd.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/*#define MV_DEBUG*/
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+/* Globals */
+static MV_SFLASH_DEVICE_PARAMS sflash[] = {
+ /* ST M25P32 SPI flash, 4MB, 64 sectors of 64K each */
+ {
+ MV_M25P_WREN_CMND_OPCD,
+ MV_M25P_WRDI_CMND_OPCD,
+ MV_M25P_RDID_CMND_OPCD,
+ MV_M25P_RDSR_CMND_OPCD,
+ MV_M25P_WRSR_CMND_OPCD,
+ MV_M25P_READ_CMND_OPCD,
+ MV_M25P_FAST_RD_CMND_OPCD,
+ MV_M25P_PP_CMND_OPCD,
+ MV_M25P_SE_CMND_OPCD,
+ MV_M25P_BE_CMND_OPCD,
+ MV_M25P_RES_CMND_OPCD,
+ MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */
+ MV_M25P32_SECTOR_SIZE,
+ MV_M25P32_SECTOR_NUMBER,
+ MV_M25P_PAGE_SIZE,
+ "ST M25P32",
+ MV_M25PXXX_ST_MANF_ID,
+ MV_M25P32_DEVICE_ID,
+ MV_M25P32_MAX_SPI_FREQ,
+ MV_M25P32_MAX_FAST_SPI_FREQ,
+ MV_M25P32_FAST_READ_DUMMY_BYTES
+ },
+ /* ST M25P64 SPI flash, 8MB, 128 sectors of 64K each */
+ {
+ MV_M25P_WREN_CMND_OPCD,
+ MV_M25P_WRDI_CMND_OPCD,
+ MV_M25P_RDID_CMND_OPCD,
+ MV_M25P_RDSR_CMND_OPCD,
+ MV_M25P_WRSR_CMND_OPCD,
+ MV_M25P_READ_CMND_OPCD,
+ MV_M25P_FAST_RD_CMND_OPCD,
+ MV_M25P_PP_CMND_OPCD,
+ MV_M25P_SE_CMND_OPCD,
+ MV_M25P_BE_CMND_OPCD,
+ MV_M25P_RES_CMND_OPCD,
+ MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */
+ MV_M25P64_SECTOR_SIZE,
+ MV_M25P64_SECTOR_NUMBER,
+ MV_M25P_PAGE_SIZE,
+ "ST M25P64",
+ MV_M25PXXX_ST_MANF_ID,
+ MV_M25P64_DEVICE_ID,
+ MV_M25P64_MAX_SPI_FREQ,
+ MV_M25P64_MAX_FAST_SPI_FREQ,
+ MV_M25P64_FAST_READ_DUMMY_BYTES
+ },
+ /* ST M25P128 SPI flash, 16MB, 64 sectors of 256K each */
+ {
+ MV_M25P_WREN_CMND_OPCD,
+ MV_M25P_WRDI_CMND_OPCD,
+ MV_M25P_RDID_CMND_OPCD,
+ MV_M25P_RDSR_CMND_OPCD,
+ MV_M25P_WRSR_CMND_OPCD,
+ MV_M25P_READ_CMND_OPCD,
+ MV_M25P_FAST_RD_CMND_OPCD,
+ MV_M25P_PP_CMND_OPCD,
+ MV_M25P_SE_CMND_OPCD,
+ MV_M25P_BE_CMND_OPCD,
+ MV_M25P_RES_CMND_OPCD,
+ MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */
+ MV_M25P128_SECTOR_SIZE,
+ MV_M25P128_SECTOR_NUMBER,
+ MV_M25P_PAGE_SIZE,
+ "ST M25P128",
+ MV_M25PXXX_ST_MANF_ID,
+ MV_M25P128_DEVICE_ID,
+ MV_M25P128_MAX_SPI_FREQ,
+ MV_M25P128_MAX_FAST_SPI_FREQ,
+ MV_M25P128_FAST_READ_DUMMY_BYTES
+ },
+ /* Macronix MXIC MX25L6405 SPI flash, 8MB, 128 sectors of 64K each */
+ {
+ MV_MX25L_WREN_CMND_OPCD,
+ MV_MX25L_WRDI_CMND_OPCD,
+ MV_MX25L_RDID_CMND_OPCD,
+ MV_MX25L_RDSR_CMND_OPCD,
+ MV_MX25L_WRSR_CMND_OPCD,
+ MV_MX25L_READ_CMND_OPCD,
+ MV_MX25L_FAST_RD_CMND_OPCD,
+ MV_MX25L_PP_CMND_OPCD,
+ MV_MX25L_SE_CMND_OPCD,
+ MV_MX25L_BE_CMND_OPCD,
+ MV_MX25L_RES_CMND_OPCD,
+ MV_MX25L_DP_CMND_OPCD,
+ MV_MX25L6405_SECTOR_SIZE,
+ MV_MX25L6405_SECTOR_NUMBER,
+ MV_MXIC_PAGE_SIZE,
+ "MXIC MX25L6405",
+ MV_MXIC_MANF_ID,
+ MV_MX25L6405_DEVICE_ID,
+ MV_MX25L6405_MAX_SPI_FREQ,
+ MV_MX25L6405_MAX_FAST_SPI_FREQ,
+ MV_MX25L6405_FAST_READ_DUMMY_BYTES
+ },
+ /* SPANSION S25FL128P SPI flash, 16MB, 64 sectors of 256K each */
+ {
+ MV_S25FL_WREN_CMND_OPCD,
+ MV_S25FL_WRDI_CMND_OPCD,
+ MV_S25FL_RDID_CMND_OPCD,
+ MV_S25FL_RDSR_CMND_OPCD,
+ MV_S25FL_WRSR_CMND_OPCD,
+ MV_S25FL_READ_CMND_OPCD,
+ MV_S25FL_FAST_RD_CMND_OPCD,
+ MV_S25FL_PP_CMND_OPCD,
+ MV_S25FL_SE_CMND_OPCD,
+ MV_S25FL_BE_CMND_OPCD,
+ MV_S25FL_RES_CMND_OPCD,
+ MV_S25FL_DP_CMND_OPCD,
+ MV_S25FL128_SECTOR_SIZE,
+ MV_S25FL128_SECTOR_NUMBER,
+ MV_S25FL_PAGE_SIZE,
+ "SPANSION S25FL128",
+ MV_SPANSION_MANF_ID,
+ MV_S25FL128_DEVICE_ID,
+ MV_S25FL128_MAX_SPI_FREQ,
+ MV_M25P128_MAX_FAST_SPI_FREQ,
+ MV_M25P128_FAST_READ_DUMMY_BYTES
+ }
+};
+
+/* Static Functions */
+static MV_STATUS mvWriteEnable (MV_SFLASH_INFO * pFlinfo);
+static MV_STATUS mvStatusRegGet (MV_SFLASH_INFO * pFlinfo, MV_U8 * pStatReg);
+static MV_STATUS mvStatusRegSet (MV_SFLASH_INFO * pFlinfo, MV_U8 sr);
+static MV_STATUS mvWaitOnWipClear(MV_SFLASH_INFO * pFlinfo);
+static MV_STATUS mvSFlashPageWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, \
+ MV_U8* pPageBuff, MV_U32 buffSize);
+static MV_STATUS mvSFlashWithDefaultsIdGet (MV_SFLASH_INFO * pFlinfo, \
+ MV_U8* manId, MV_U16* devId);
+
+/*******************************************************************************
+* mvWriteEnable - serialize the write enable sequence
+*
+* DESCRIPTION:
+* transmit the sequence for write enable
+*
+********************************************************************************/
+static MV_STATUS mvWriteEnable(MV_SFLASH_INFO * pFlinfo)
+{
+ MV_U8 cmd[MV_SFLASH_WREN_CMND_LENGTH];
+
+
+ cmd[0] = sflash[pFlinfo->index].opcdWREN;
+
+ return mvSpiWriteThenRead(cmd, MV_SFLASH_WREN_CMND_LENGTH, NULL, 0, 0);
+}
+
+/*******************************************************************************
+* mvStatusRegGet - Retrieve the value of the status register
+*
+* DESCRIPTION:
+* perform the RDSR sequence to get the 8bit status register
+*
+********************************************************************************/
+static MV_STATUS mvStatusRegGet(MV_SFLASH_INFO * pFlinfo, MV_U8 * pStatReg)
+{
+ MV_STATUS ret;
+ MV_U8 cmd[MV_SFLASH_RDSR_CMND_LENGTH];
+ MV_U8 sr[MV_SFLASH_RDSR_REPLY_LENGTH];
+
+
+
+
+ cmd[0] = sflash[pFlinfo->index].opcdRDSR;
+
+ if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_RDSR_CMND_LENGTH, sr,
+ MV_SFLASH_RDSR_REPLY_LENGTH,0)) != MV_OK)
+ return ret;
+
+ *pStatReg = sr[0];
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvWaitOnWipClear - Block waiting for the WIP (write in progress) to be cleared
+*
+* DESCRIPTION:
+* Block waiting for the WIP (write in progress) to be cleared
+*
+********************************************************************************/
+static MV_STATUS mvWaitOnWipClear(MV_SFLASH_INFO * pFlinfo)
+{
+ MV_STATUS ret;
+ MV_U32 i;
+ MV_U8 stat;
+
+ for (i=0; i<MV_SFLASH_MAX_WAIT_LOOP; i++)
+ {
+ if ((ret = mvStatusRegGet(pFlinfo, &stat)) != MV_OK)
+ return ret;
+
+ if ((stat & MV_SFLASH_STATUS_REG_WIP_MASK) == 0)
+ return MV_OK;
+ }
+
+ DB(mvOsPrintf("%s WARNING: Write Timeout!\n", __FUNCTION__);)
+ return MV_TIMEOUT;
+}
+
+/*******************************************************************************
+* mvWaitOnChipEraseDone - Block waiting for the WIP (write in progress) to be
+* cleared after a chip erase command which is supposed
+* to take about 2:30 minutes
+*
+* DESCRIPTION:
+* Block waiting for the WIP (write in progress) to be cleared
+*
+********************************************************************************/
+static MV_STATUS mvWaitOnChipEraseDone(MV_SFLASH_INFO * pFlinfo)
+{
+ MV_STATUS ret;
+ MV_U32 i;
+ MV_U8 stat;
+
+ for (i=0; i<MV_SFLASH_CHIP_ERASE_MAX_WAIT_LOOP; i++)
+ {
+ if ((ret = mvStatusRegGet(pFlinfo, &stat)) != MV_OK)
+ return ret;
+
+ if ((stat & MV_SFLASH_STATUS_REG_WIP_MASK) == 0)
+ return MV_OK;
+ }
+
+ DB(mvOsPrintf("%s WARNING: Write Timeout!\n", __FUNCTION__);)
+ return MV_TIMEOUT;
+}
+
+/*******************************************************************************
+* mvStatusRegSet - Set the value of the 8bit status register
+*
+* DESCRIPTION:
+* Set the value of the 8bit status register
+*
+********************************************************************************/
+static MV_STATUS mvStatusRegSet(MV_SFLASH_INFO * pFlinfo, MV_U8 sr)
+{
+ MV_STATUS ret;
+ MV_U8 cmd[MV_SFLASH_WRSR_CMND_LENGTH];
+
+
+ /* Issue the Write enable command prior the WRSR command */
+ if ((ret = mvWriteEnable(pFlinfo)) != MV_OK)
+ return ret;
+
+ /* Write the SR with the new values */
+ cmd[0] = sflash[pFlinfo->index].opcdWRSR;
+ cmd[1] = sr;
+
+ if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_WRSR_CMND_LENGTH, NULL, 0, 0)) != MV_OK)
+ return ret;
+
+ if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK)
+ return ret;
+
+ mvOsDelay(1);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashPageWr - Write up to 256 Bytes in the same page
+*
+* DESCRIPTION:
+* Write a buffer up to the page size in length provided that the whole address
+* range is within the same page (alligned to page bounderies)
+*
+*******************************************************************************/
+static MV_STATUS mvSFlashPageWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+ MV_U8* pPageBuff, MV_U32 buffSize)
+{
+ MV_STATUS ret;
+ MV_U8 cmd[MV_SFLASH_PP_CMND_LENGTH];
+
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invalid parameter device index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ /* check that we do not cross the page bounderies */
+ if (((offset & (sflash[pFlinfo->index].pageSize - 1)) + buffSize) >
+ sflash[pFlinfo->index].pageSize)
+ {
+ DB(mvOsPrintf("%s WARNING: Page allignment problem!\n", __FUNCTION__);)
+ return MV_OUT_OF_RANGE;
+ }
+
+ /* Issue the Write enable command prior the page program command */
+ if ((ret = mvWriteEnable(pFlinfo)) != MV_OK)
+ return ret;
+
+ cmd[0] = sflash[pFlinfo->index].opcdPP;
+ cmd[1] = ((offset >> 16) & 0xFF);
+ cmd[2] = ((offset >> 8) & 0xFF);
+ cmd[3] = (offset & 0xFF);
+
+ if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_PP_CMND_LENGTH, pPageBuff, buffSize)) != MV_OK)
+ return ret;
+
+ if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK)
+ return ret;
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashWithDefaultsIdGet - Try to read the manufacturer and Device IDs from
+* the device using the default RDID opcode and the default WREN opcode.
+*
+* DESCRIPTION:
+* This is used to detect a generic device that uses the default opcodes
+* for the WREN and RDID.
+*
+********************************************************************************/
+static MV_STATUS mvSFlashWithDefaultsIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* manId, MV_U16* devId)
+{
+ MV_STATUS ret;
+ MV_U8 cmdRDID[MV_SFLASH_RDID_CMND_LENGTH];
+ MV_U8 id[MV_SFLASH_RDID_REPLY_LENGTH];
+
+
+
+ /* Use the default RDID opcode to read the IDs */
+ cmdRDID[0] = MV_SFLASH_DEFAULT_RDID_OPCD; /* unknown model try default */
+ if ((ret = mvSpiWriteThenRead(cmdRDID, MV_SFLASH_RDID_CMND_LENGTH, id, MV_SFLASH_RDID_REPLY_LENGTH, 0)) != MV_OK)
+ return ret;
+
+ *manId = id[0];
+ *devId = 0;
+ *devId |= (id[1] << 8);
+ *devId |= id[2];
+
+ return MV_OK;
+}
+
+/*
+#####################################################################################
+#####################################################################################
+*/
+
+/*******************************************************************************
+* mvSFlashInit - Initialize the serial flash device
+*
+* DESCRIPTION:
+* Perform the neccessary initialization and configuration
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+* pFlinfo->baseAddr: base address in fast mode.
+* pFlinfo->index: Index of the flash in the sflash tabel. If the SPI
+* flash device does not support read Id command with
+* the standard opcode, then the user should supply this
+* as an input to skip the autodetection process!!!!
+*
+* OUTPUT:
+* pFlinfo: pointer to the Flash information structure after detection
+* pFlinfo->manufacturerId: Manufacturer ID
+* pFlinfo->deviceId: Device ID
+* pFlinfo->sectorSize: size of the sector (all sectors are the same).
+* pFlinfo->sectorNumber: number of sectors.
+* pFlinfo->pageSize: size of the page.
+* pFlinfo->index: Index of the detected flash in the sflash tabel
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashInit (MV_SFLASH_INFO * pFlinfo)
+{
+ MV_STATUS ret;
+ MV_U8 manf;
+ MV_U16 dev;
+ MV_U32 indx;
+ MV_BOOL detectFlag = MV_FALSE;
+
+ /* check for NULL pointer */
+ if (pFlinfo == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Initialize the SPI interface with low frequency to make sure that the read ID succeeds */
+ if ((ret = mvSpiInit(MV_SFLASH_BASIC_SPI_FREQ)) != MV_OK)
+ {
+ mvOsPrintf("%s ERROR: Failed to initialize the SPI interface!\n", __FUNCTION__);
+ return ret;
+ }
+
+ /* First try to read the Manufacturer and Device IDs */
+ if ((ret = mvSFlashIdGet(pFlinfo, &manf, &dev)) != MV_OK)
+ {
+ mvOsPrintf("%s ERROR: Failed to get the SFlash ID!\n", __FUNCTION__);
+ return ret;
+ }
+
+ /* loop over the whole table and look for the appropriate SFLASH */
+ for (indx=0; indx<MV_ARRAY_SIZE(sflash); indx++)
+ {
+ if ((manf == sflash[indx].manufacturerId) && (dev == sflash[indx].deviceId))
+ {
+ pFlinfo->manufacturerId = manf;
+ pFlinfo->deviceId = dev;
+ pFlinfo->index = indx;
+ detectFlag = MV_TRUE;
+ }
+ }
+
+ if(!detectFlag)
+ {
+ mvOsPrintf("%s ERROR: Unknown SPI flash device!\n", __FUNCTION__);
+ return MV_FAIL;
+ }
+
+ /* fill the info based on the model detected */
+ pFlinfo->sectorSize = sflash[pFlinfo->index].sectorSize;
+ pFlinfo->sectorNumber = sflash[pFlinfo->index].sectorNumber;
+ pFlinfo->pageSize = sflash[pFlinfo->index].pageSize;
+
+ /* Set the SPI frequency to the MAX allowed for the device for best performance */
+ if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFreq)) != MV_OK)
+ {
+ mvOsPrintf("%s ERROR: Failed to set the SPI frequency!\n", __FUNCTION__);
+ return ret;
+ }
+
+ /* As default lock the SR */
+ if ((ret = mvSFlashStatRegLock(pFlinfo, MV_TRUE)) != MV_OK)
+ return ret;
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashSectorErase - Erasse a single sector of the serial flash
+*
+* DESCRIPTION:
+* Issue the erase sector command and address
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+* secNumber: sector Number to erase (0 -> (sectorNumber-1))
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashSectorErase (MV_SFLASH_INFO * pFlinfo, MV_U32 secNumber)
+{
+ MV_STATUS ret;
+ MV_U8 cmd[MV_SFLASH_SE_CMND_LENGTH];
+
+ MV_U32 secAddr = (secNumber * pFlinfo->sectorSize);
+#if 0
+ MV_U32 i;
+ MV_U32 * pW = (MV_U32*) (secAddr + pFlinfo->baseAddr);
+ MV_U32 erasedWord = 0xFFFFFFFF;
+ MV_U32 wordsPerSector = (pFlinfo->sectorSize / sizeof(MV_U32));
+ MV_BOOL eraseNeeded = MV_FALSE;
+#endif
+ /* check for NULL pointer */
+ if (pFlinfo == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ /* check that the sector number is valid */
+ if (secNumber >= pFlinfo->sectorNumber)
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter sector number!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ /* we don't want to access SPI in direct mode from in-direct API,
+ becasue of timing issue between CS asserts. */
+#if 0
+ /* First compare to FF and check if erase is needed */
+ for (i=0; i<wordsPerSector; i++)
+ {
+ if (memcmp(pW, &erasedWord, sizeof(MV_U32)) != 0)
+ {
+ eraseNeeded = MV_TRUE;
+ break;
+ }
+
+ ++pW;
+ }
+ if (!eraseNeeded)
+ return MV_OK;
+#endif
+
+ cmd[0] = sflash[pFlinfo->index].opcdSE;
+ cmd[1] = ((secAddr >> 16) & 0xFF);
+ cmd[2] = ((secAddr >> 8) & 0xFF);
+ cmd[3] = (secAddr & 0xFF);
+
+ /* Issue the Write enable command prior the sector erase command */
+ if ((ret = mvWriteEnable(pFlinfo)) != MV_OK)
+ return ret;
+
+ if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_SE_CMND_LENGTH, NULL, 0)) != MV_OK)
+ return ret;
+
+ if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK)
+ return ret;
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashChipErase - Erasse the whole serial flash
+*
+* DESCRIPTION:
+* Issue the bulk (chip) erase command
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashChipErase (MV_SFLASH_INFO * pFlinfo)
+{
+ MV_STATUS ret;
+ MV_U8 cmd[MV_SFLASH_BE_CMND_LENGTH];
+
+
+ /* check for NULL pointer */
+ if (pFlinfo == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ cmd[0] = sflash[pFlinfo->index].opcdBE;
+
+ /* Issue the Write enable command prior the Bulk erase command */
+ if ((ret = mvWriteEnable(pFlinfo)) != MV_OK)
+ return ret;
+
+ if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_BE_CMND_LENGTH, NULL, 0)) != MV_OK)
+ return ret;
+
+ if ((ret = mvWaitOnChipEraseDone(pFlinfo)) != MV_OK)
+ return ret;
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashBlockRd - Read from the serial flash
+*
+* DESCRIPTION:
+* Issue the read command and address then perfom the needed read
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+* offset: byte offset with the flash to start reading from
+* pReadBuff: pointer to the buffer to read the data in
+* buffSize: size of the buffer to read.
+*
+* OUTPUT:
+* pReadBuff: pointer to the buffer containing the read data
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+ MV_U8* pReadBuff, MV_U32 buffSize)
+{
+ MV_U8 cmd[MV_SFLASH_READ_CMND_LENGTH];
+
+
+ /* check for NULL pointer */
+ if ((pFlinfo == NULL) || (pReadBuff == NULL))
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ cmd[0] = sflash[pFlinfo->index].opcdREAD;
+ cmd[1] = ((offset >> 16) & 0xFF);
+ cmd[2] = ((offset >> 8) & 0xFF);
+ cmd[3] = (offset & 0xFF);
+
+ return mvSpiWriteThenRead(cmd, MV_SFLASH_READ_CMND_LENGTH, pReadBuff, buffSize, 0);
+}
+
+/*******************************************************************************
+* mvSFlashFastBlockRd - Fast read from the serial flash
+*
+* DESCRIPTION:
+* Issue the fast read command and address then perfom the needed read
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+* offset: byte offset with the flash to start reading from
+* pReadBuff: pointer to the buffer to read the data in
+* buffSize: size of the buffer to read.
+*
+* OUTPUT:
+* pReadBuff: pointer to the buffer containing the read data
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashFastBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+ MV_U8* pReadBuff, MV_U32 buffSize)
+{
+ MV_U8 cmd[MV_SFLASH_READ_CMND_LENGTH];
+ MV_STATUS ret;
+
+ /* check for NULL pointer */
+ if ((pFlinfo == NULL) || (pReadBuff == NULL))
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ /* Set the SPI frequency to the MAX allowed for fast-read operations */
+ mvOsPrintf("Setting freq to %d.\n",sflash[pFlinfo->index].spiMaxFastFreq);
+ if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFastFreq)) != MV_OK)
+ {
+ mvOsPrintf("%s ERROR: Failed to set the SPI fast frequency!\n", __FUNCTION__);
+ return ret;
+ }
+
+ cmd[0] = sflash[pFlinfo->index].opcdFSTRD;
+ cmd[1] = ((offset >> 16) & 0xFF);
+ cmd[2] = ((offset >> 8) & 0xFF);
+ cmd[3] = (offset & 0xFF);
+
+
+ ret = mvSpiWriteThenRead(cmd, MV_SFLASH_READ_CMND_LENGTH, pReadBuff, buffSize,
+ sflash[pFlinfo->index].spiFastRdDummyBytes);
+
+ /* Reset the SPI frequency to the MAX allowed for the device for best performance */
+ if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFreq)) != MV_OK)
+ {
+ mvOsPrintf("%s ERROR: Failed to set the SPI frequency!\n", __FUNCTION__);
+ return ret;
+ }
+
+ return ret;
+}
+
+
+/*******************************************************************************
+* mvSFlashBlockWr - Write a buffer with any size
+*
+* DESCRIPTION:
+* write regardless of the page boundaries and size limit per Page
+* program command
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+* offset: byte offset within the flash region
+* pWriteBuff: pointer to the buffer holding the data to program
+* buffSize: size of the buffer to write
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashBlockWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+ MV_U8* pWriteBuff, MV_U32 buffSize)
+{
+ MV_STATUS ret;
+ MV_U32 data2write = buffSize;
+ MV_U32 preAllOffset = (offset & MV_SFLASH_PAGE_ALLIGN_MASK(MV_M25P_PAGE_SIZE));
+ MV_U32 preAllSz = (preAllOffset ? (MV_M25P_PAGE_SIZE - preAllOffset) : 0);
+ MV_U32 writeOffset = offset;
+
+ /* check for NULL pointer */
+#ifndef CONFIG_MARVELL
+ if(NULL == pWriteBuff)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+#endif
+
+ if (pFlinfo == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ /* check that the buffer size does not exceed the flash size */
+ if ((offset + buffSize) > mvSFlashSizeGet(pFlinfo))
+ {
+ DB(mvOsPrintf("%s WARNING: Write exceeds flash size!\n", __FUNCTION__);)
+ return MV_OUT_OF_RANGE;
+ }
+
+ /* check if the total block size is less than the first chunk remainder */
+ if (data2write < preAllSz)
+ preAllSz = data2write;
+
+ /* check if programing does not start at a 64byte alligned offset */
+ if (preAllSz)
+ {
+ if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, preAllSz)) != MV_OK)
+ return ret;
+
+ /* increment pointers and counters */
+ writeOffset += preAllSz;
+ data2write -= preAllSz;
+ pWriteBuff += preAllSz;
+ }
+
+ /* program the data that fits in complete page chunks */
+ while (data2write >= sflash[pFlinfo->index].pageSize)
+ {
+ if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, sflash[pFlinfo->index].pageSize)) != MV_OK)
+ return ret;
+
+ /* increment pointers and counters */
+ writeOffset += sflash[pFlinfo->index].pageSize;
+ data2write -= sflash[pFlinfo->index].pageSize;
+ pWriteBuff += sflash[pFlinfo->index].pageSize;
+ }
+
+ /* program the last partial chunk */
+ if (data2write)
+ {
+ if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, data2write)) != MV_OK)
+ return ret;
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashIdGet - Get the manufacturer and device IDs.
+*
+* DESCRIPTION:
+* Get the Manufacturer and device IDs from the serial flash through
+* writing the RDID command then reading 3 bytes of data. In case that
+* this command was called for the first time in order to detect the
+* manufacturer and device IDs, then the default RDID opcode will be used
+* unless the device index is indicated by the user (in case the SPI flash
+* does not use the default RDID opcode).
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+* pManId: pointer to the 8bit variable to hold the manufacturing ID
+* pDevId: pointer to the 16bit variable to hold the device ID
+*
+* OUTPUT:
+* pManId: pointer to the 8bit variable holding the manufacturing ID
+* pDevId: pointer to the 16bit variable holding the device ID
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* pManId, MV_U16* pDevId)
+{
+ MV_STATUS ret;
+ MV_U8 cmd[MV_SFLASH_RDID_CMND_LENGTH];
+ MV_U8 id[MV_SFLASH_RDID_REPLY_LENGTH];
+
+
+
+ /* check for NULL pointer */
+ if ((pFlinfo == NULL) || (pManId == NULL) || (pDevId == NULL))
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ return mvSFlashWithDefaultsIdGet(pFlinfo, pManId, pDevId);
+ else
+ cmd[0] = sflash[pFlinfo->index].opcdRDID;
+
+ if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_RDID_CMND_LENGTH, id, MV_SFLASH_RDID_REPLY_LENGTH, 0)) != MV_OK)
+ return ret;
+
+ *pManId = id[0];
+ *pDevId = 0;
+ *pDevId |= (id[1] << 8);
+ *pDevId |= id[2];
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashWpRegionSet - Set the Write-Protected region
+*
+* DESCRIPTION:
+* Set the Write-Protected region
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+* wpRegion: which region will be protected
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashWpRegionSet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION wpRegion)
+{
+ MV_U8 wpMask;
+
+ /* check for NULL pointer */
+ if (pFlinfo == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ /* Check if the chip is an ST flash; then WP supports only 3 bits */
+ if (pFlinfo->manufacturerId == MV_M25PXXX_ST_MANF_ID)
+ {
+ switch (wpRegion)
+ {
+ case MV_WP_NONE:
+ wpMask = MV_M25P_STATUS_BP_NONE;
+ break;
+
+ case MV_WP_UPR_1OF128:
+ DB(mvOsPrintf("%s WARNING: Invaild option for this flash chip!\n", __FUNCTION__);)
+ return MV_NOT_SUPPORTED;
+
+ case MV_WP_UPR_1OF64:
+ wpMask = MV_M25P_STATUS_BP_1_OF_64;
+ break;
+
+ case MV_WP_UPR_1OF32:
+ wpMask = MV_M25P_STATUS_BP_1_OF_32;
+ break;
+
+ case MV_WP_UPR_1OF16:
+ wpMask = MV_M25P_STATUS_BP_1_OF_16;
+ break;
+
+ case MV_WP_UPR_1OF8:
+ wpMask = MV_M25P_STATUS_BP_1_OF_8;
+ break;
+
+ case MV_WP_UPR_1OF4:
+ wpMask = MV_M25P_STATUS_BP_1_OF_4;
+ break;
+
+ case MV_WP_UPR_1OF2:
+ wpMask = MV_M25P_STATUS_BP_1_OF_2;
+ break;
+
+ case MV_WP_ALL:
+ wpMask = MV_M25P_STATUS_BP_ALL;
+ break;
+
+ default:
+ DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+ }
+ /* check if the manufacturer is MXIC then the WP is 4bits */
+ else if (pFlinfo->manufacturerId == MV_MXIC_MANF_ID)
+ {
+ switch (wpRegion)
+ {
+ case MV_WP_NONE:
+ wpMask = MV_MX25L_STATUS_BP_NONE;
+ break;
+
+ case MV_WP_UPR_1OF128:
+ wpMask = MV_MX25L_STATUS_BP_1_OF_128;
+ break;
+
+ case MV_WP_UPR_1OF64:
+ wpMask = MV_MX25L_STATUS_BP_1_OF_64;
+ break;
+
+ case MV_WP_UPR_1OF32:
+ wpMask = MV_MX25L_STATUS_BP_1_OF_32;
+ break;
+
+ case MV_WP_UPR_1OF16:
+ wpMask = MV_MX25L_STATUS_BP_1_OF_16;
+ break;
+
+ case MV_WP_UPR_1OF8:
+ wpMask = MV_MX25L_STATUS_BP_1_OF_8;
+ break;
+
+ case MV_WP_UPR_1OF4:
+ wpMask = MV_MX25L_STATUS_BP_1_OF_4;
+ break;
+
+ case MV_WP_UPR_1OF2:
+ wpMask = MV_MX25L_STATUS_BP_1_OF_2;
+ break;
+
+ case MV_WP_ALL:
+ wpMask = MV_MX25L_STATUS_BP_ALL;
+ break;
+
+ default:
+ DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+ }
+ /* check if the manufacturer is SPANSION then the WP is 4bits */
+ else if (pFlinfo->manufacturerId == MV_SPANSION_MANF_ID)
+ {
+ switch (wpRegion)
+ {
+ case MV_WP_NONE:
+ wpMask = MV_S25FL_STATUS_BP_NONE;
+ break;
+
+ case MV_WP_UPR_1OF128:
+ DB(mvOsPrintf("%s WARNING: Invaild option for this flash chip!\n", __FUNCTION__);)
+ return MV_NOT_SUPPORTED;
+
+ case MV_WP_UPR_1OF64:
+ wpMask = MV_S25FL_STATUS_BP_1_OF_64;
+ break;
+
+ case MV_WP_UPR_1OF32:
+ wpMask = MV_S25FL_STATUS_BP_1_OF_32;
+ break;
+
+ case MV_WP_UPR_1OF16:
+ wpMask = MV_S25FL_STATUS_BP_1_OF_16;
+ break;
+
+ case MV_WP_UPR_1OF8:
+ wpMask = MV_S25FL_STATUS_BP_1_OF_8;
+ break;
+
+ case MV_WP_UPR_1OF4:
+ wpMask = MV_S25FL_STATUS_BP_1_OF_4;
+ break;
+
+ case MV_WP_UPR_1OF2:
+ wpMask = MV_S25FL_STATUS_BP_1_OF_2;
+ break;
+
+ case MV_WP_ALL:
+ wpMask = MV_S25FL_STATUS_BP_ALL;
+ break;
+
+
+ default:
+ DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+ }
+ else
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter Manufacturer ID!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ /* Verify that the SRWD bit is always set - register is s/w locked */
+ wpMask |= MV_SFLASH_STATUS_REG_SRWD_MASK;
+
+ return mvStatusRegSet(pFlinfo, wpMask);
+}
+
+/*******************************************************************************
+* mvSFlashWpRegionGet - Get the Write-Protected region configured
+*
+* DESCRIPTION:
+* Get from the chip the Write-Protected region configured
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+* pWpRegion: pointer to the variable to return the WP region in
+*
+* OUTPUT:
+* wpRegion: pointer to the variable holding the WP region configured
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashWpRegionGet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION * pWpRegion)
+{
+ MV_STATUS ret;
+ MV_U8 reg;
+
+ /* check for NULL pointer */
+ if ((pFlinfo == NULL) || (pWpRegion == NULL))
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ if ((ret = mvStatusRegGet(pFlinfo, ®)) != MV_OK)
+ return ret;
+
+ /* Check if the chip is an ST flash; then WP supports only 3 bits */
+ if (pFlinfo->manufacturerId == MV_M25PXXX_ST_MANF_ID)
+ {
+ switch ((reg & MV_M25P_STATUS_REG_WP_MASK))
+ {
+ case MV_M25P_STATUS_BP_NONE:
+ *pWpRegion = MV_WP_NONE;
+ break;
+
+ case MV_M25P_STATUS_BP_1_OF_64:
+ *pWpRegion = MV_WP_UPR_1OF64;
+ break;
+
+ case MV_M25P_STATUS_BP_1_OF_32:
+ *pWpRegion = MV_WP_UPR_1OF32;
+ break;
+
+ case MV_M25P_STATUS_BP_1_OF_16:
+ *pWpRegion = MV_WP_UPR_1OF16;
+ break;
+
+ case MV_M25P_STATUS_BP_1_OF_8:
+ *pWpRegion = MV_WP_UPR_1OF8;
+ break;
+
+ case MV_M25P_STATUS_BP_1_OF_4:
+ *pWpRegion = MV_WP_UPR_1OF4;
+ break;
+
+ case MV_M25P_STATUS_BP_1_OF_2:
+ *pWpRegion = MV_WP_UPR_1OF2;
+ break;
+
+ case MV_M25P_STATUS_BP_ALL:
+ *pWpRegion = MV_WP_ALL;
+ break;
+
+ default:
+ DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);)
+ return MV_BAD_VALUE;
+ }
+ }
+ /* check if the manufacturer is MXIC then the WP is 4bits */
+ else if (pFlinfo->manufacturerId == MV_MXIC_MANF_ID)
+ {
+ switch ((reg & MV_MX25L_STATUS_REG_WP_MASK))
+ {
+ case MV_MX25L_STATUS_BP_NONE:
+ *pWpRegion = MV_WP_NONE;
+ break;
+
+ case MV_MX25L_STATUS_BP_1_OF_128:
+ *pWpRegion = MV_WP_UPR_1OF128;
+ break;
+
+ case MV_MX25L_STATUS_BP_1_OF_64:
+ *pWpRegion = MV_WP_UPR_1OF64;
+ break;
+
+ case MV_MX25L_STATUS_BP_1_OF_32:
+ *pWpRegion = MV_WP_UPR_1OF32;
+ break;
+
+ case MV_MX25L_STATUS_BP_1_OF_16:
+ *pWpRegion = MV_WP_UPR_1OF16;
+ break;
+
+ case MV_MX25L_STATUS_BP_1_OF_8:
+ *pWpRegion = MV_WP_UPR_1OF8;
+ break;
+
+ case MV_MX25L_STATUS_BP_1_OF_4:
+ *pWpRegion = MV_WP_UPR_1OF4;
+ break;
+
+ case MV_MX25L_STATUS_BP_1_OF_2:
+ *pWpRegion = MV_WP_UPR_1OF2;
+ break;
+
+ case MV_MX25L_STATUS_BP_ALL:
+ *pWpRegion = MV_WP_ALL;
+ break;
+
+ default:
+ DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);)
+ return MV_BAD_VALUE;
+ }
+ }
+ /* Check if the chip is an SPANSION flash; then WP supports only 3 bits */
+ else if (pFlinfo->manufacturerId == MV_SPANSION_MANF_ID)
+ {
+ switch ((reg & MV_S25FL_STATUS_REG_WP_MASK))
+ {
+ case MV_S25FL_STATUS_BP_NONE:
+ *pWpRegion = MV_WP_NONE;
+ break;
+
+ case MV_S25FL_STATUS_BP_1_OF_64:
+ *pWpRegion = MV_WP_UPR_1OF64;
+ break;
+
+ case MV_S25FL_STATUS_BP_1_OF_32:
+ *pWpRegion = MV_WP_UPR_1OF32;
+ break;
+
+ case MV_S25FL_STATUS_BP_1_OF_16:
+ *pWpRegion = MV_WP_UPR_1OF16;
+ break;
+
+ case MV_S25FL_STATUS_BP_1_OF_8:
+ *pWpRegion = MV_WP_UPR_1OF8;
+ break;
+
+ case MV_S25FL_STATUS_BP_1_OF_4:
+ *pWpRegion = MV_WP_UPR_1OF4;
+ break;
+
+ case MV_S25FL_STATUS_BP_1_OF_2:
+ *pWpRegion = MV_WP_UPR_1OF2;
+ break;
+
+ case MV_S25FL_STATUS_BP_ALL:
+ *pWpRegion = MV_WP_ALL;
+ break;
+
+ default:
+ DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);)
+ return MV_BAD_VALUE;
+ }
+ }
+ else
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter Manufacturer ID!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashStatRegLock - Lock the status register for writing - W/Vpp
+* pin should be low to take effect
+*
+* DESCRIPTION:
+* Lock the access to the Status Register for writing. This will
+* cause the flash to enter the hardware protection mode if the W/Vpp
+* is low. If the W/Vpp is hi, the chip will be in soft protection mode, but
+* the register will continue to be writable if WREN sequence was used.
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+* srLock: enable/disable (MV_TRUE/MV_FALSE) status registor lock mechanism
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashStatRegLock (MV_SFLASH_INFO * pFlinfo, MV_BOOL srLock)
+{
+ MV_STATUS ret;
+ MV_U8 reg;
+
+ /* check for NULL pointer */
+ if (pFlinfo == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ if ((ret = mvStatusRegGet(pFlinfo, ®)) != MV_OK)
+ return ret;
+
+ if (srLock)
+ reg |= MV_SFLASH_STATUS_REG_SRWD_MASK;
+ else
+ reg &= ~MV_SFLASH_STATUS_REG_SRWD_MASK;
+
+ return mvStatusRegSet(pFlinfo, reg);
+}
+
+/*******************************************************************************
+* mvSFlashSizeGet - Get the size of the SPI flash
+*
+* DESCRIPTION:
+* based on the sector number and size of each sector calculate the total
+* size of the flash memory.
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Size of the flash in bytes.
+*
+*
+*******************************************************************************/
+MV_U32 mvSFlashSizeGet (MV_SFLASH_INFO * pFlinfo)
+{
+ /* check for NULL pointer */
+ if (pFlinfo == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return 0;
+ }
+
+ return (pFlinfo->sectorSize * pFlinfo->sectorNumber);
+}
+
+/*******************************************************************************
+* mvSFlashPowerSaveEnter - Cause the falsh device to go into power save mode
+*
+* DESCRIPTION:
+* Enter a special power save mode.
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Size of the flash in bytes.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashPowerSaveEnter(MV_SFLASH_INFO * pFlinfo)
+{
+ MV_STATUS ret;
+ MV_U8 cmd[MV_SFLASH_DP_CMND_LENGTH];
+
+
+ /* check for NULL pointer */
+ if (pFlinfo == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return 0;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ /* check that power save mode is supported in the specific device */
+ if (sflash[pFlinfo->index].opcdPwrSave == MV_SFLASH_NO_SPECIFIC_OPCD)
+ {
+ DB(mvOsPrintf("%s WARNING: Power save not supported for this device!\n", __FUNCTION__);)
+ return MV_NOT_SUPPORTED;
+ }
+
+ cmd[0] = sflash[pFlinfo->index].opcdPwrSave;
+
+ if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_DP_CMND_LENGTH, NULL, 0)) != MV_OK)
+ return ret;
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvSFlashPowerSaveExit - Cause the falsh device to exit the power save mode
+*
+* DESCRIPTION:
+* Exit the deep power save mode.
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Size of the flash in bytes.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashPowerSaveExit (MV_SFLASH_INFO * pFlinfo)
+{
+ MV_STATUS ret;
+ MV_U8 cmd[MV_SFLASH_RES_CMND_LENGTH];
+
+
+ /* check for NULL pointer */
+ if (pFlinfo == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return 0;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return MV_BAD_PARAM;
+ }
+
+ /* check that power save mode is supported in the specific device */
+ if (sflash[pFlinfo->index].opcdRES == MV_SFLASH_NO_SPECIFIC_OPCD)
+ {
+ DB(mvOsPrintf("%s WARNING: Read Electronic Signature not supported for this device!\n", __FUNCTION__);)
+ return MV_NOT_SUPPORTED;
+ }
+
+ cmd[0] = sflash[pFlinfo->index].opcdRES;
+
+ if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_RES_CMND_LENGTH, NULL, 0)) != MV_OK)
+ return ret;
+
+ /* add the delay needed for the device to wake up */
+ mvOsDelay(MV_MXIC_DP_EXIT_DELAY); /* 30 ms */
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvSFlashModelGet - Retreive the string with the device manufacturer and model
+*
+* DESCRIPTION:
+* Retreive the string with the device manufacturer and model
+*
+* INPUT:
+* pFlinfo: pointer to the Flash information structure
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* pointer to the string indicating the device manufacturer and model
+*
+*
+*******************************************************************************/
+const MV_8 * mvSFlashModelGet (MV_SFLASH_INFO * pFlinfo)
+{
+ static const MV_8 * unknModel = (const MV_8 *)"Unknown";
+
+ /* check for NULL pointer */
+ if (pFlinfo == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return 0;
+ }
+
+ /* Protection - check if the model was detected */
+ if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+ {
+ DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+ return unknModel;
+ }
+
+ return sflash[pFlinfo->index].deviceModel;
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSFlashH
+#define __INCmvSFlashH
+
+#include "mvTypes.h"
+
+/* MCAROS */
+#define MV_SFLASH_PAGE_ALLIGN_MASK(pgSz) (pgSz-1)
+#define MV_ARRAY_SIZE(a) ((sizeof(a)) / (sizeof(a[0])))
+
+/* Constants */
+#define MV_INVALID_DEVICE_NUMBER 0xFFFFFFFF
+/* 10 MHz is the minimum possible SPI frequency when tclk is set 200MHz*/
+#define MV_SFLASH_BASIC_SPI_FREQ 10000000
+/* enumerations */
+typedef enum
+{
+ MV_WP_NONE, /* Unprotect the whole chip */
+ MV_WP_UPR_1OF128, /* Write protect the upper 1/128 part */
+ MV_WP_UPR_1OF64, /* Write protect the upper 1/64 part */
+ MV_WP_UPR_1OF32, /* Write protect the upper 1/32 part */
+ MV_WP_UPR_1OF16, /* Write protect the upper 1/16 part */
+ MV_WP_UPR_1OF8, /* Write protect the upper 1/8 part */
+ MV_WP_UPR_1OF4, /* Write protect the upper 1/4 part */
+ MV_WP_UPR_1OF2, /* Write protect the upper 1/2 part */
+ MV_WP_ALL /* Write protect the whole chip */
+} MV_SFLASH_WP_REGION;
+
+/* Type Definitions */
+typedef struct
+{
+ MV_U8 opcdWREN; /* Write enable opcode */
+ MV_U8 opcdWRDI; /* Write disable opcode */
+ MV_U8 opcdRDID; /* Read ID opcode */
+ MV_U8 opcdRDSR; /* Read Status Register opcode */
+ MV_U8 opcdWRSR; /* Write Status register opcode */
+ MV_U8 opcdREAD; /* Read opcode */
+ MV_U8 opcdFSTRD; /* Fast Read opcode */
+ MV_U8 opcdPP; /* Page program opcode */
+ MV_U8 opcdSE; /* Sector erase opcode */
+ MV_U8 opcdBE; /* Bulk erase opcode */
+ MV_U8 opcdRES; /* Read electronic signature */
+ MV_U8 opcdPwrSave; /* Go into power save mode */
+ MV_U32 sectorSize; /* Size of each sector */
+ MV_U32 sectorNumber; /* Number of sectors */
+ MV_U32 pageSize; /* size of each page */
+ const char * deviceModel; /* string with the device model */
+ MV_U32 manufacturerId; /* The manufacturer ID */
+ MV_U32 deviceId; /* Device ID */
+ MV_U32 spiMaxFreq; /* The MAX frequency that can be used with the device */
+ MV_U32 spiMaxFastFreq; /* The MAX frequency that can be used with the device for fast reads */
+ MV_U32 spiFastRdDummyBytes; /* Number of dumy bytes to read before real data when working in fast read mode. */
+} MV_SFLASH_DEVICE_PARAMS;
+
+typedef struct
+{
+ MV_U32 baseAddr; /* Flash Base Address used in fast mode */
+ MV_U8 manufacturerId; /* Manufacturer ID */
+ MV_U16 deviceId; /* Device ID */
+ MV_U32 sectorSize; /* Size of each sector - all the same */
+ MV_U32 sectorNumber; /* Number of sectors */
+ MV_U32 pageSize; /* Page size - affect allignment */
+ MV_U32 index; /* index of the device in the sflash table (internal parameter) */
+} MV_SFLASH_INFO;
+
+/* Function Prototypes */
+/* Init */
+MV_STATUS mvSFlashInit (MV_SFLASH_INFO * pFlinfo);
+
+/* erase */
+MV_STATUS mvSFlashSectorErase (MV_SFLASH_INFO * pFlinfo, MV_U32 secNumber);
+MV_STATUS mvSFlashChipErase (MV_SFLASH_INFO * pFlinfo);
+
+/* Read */
+MV_STATUS mvSFlashBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+ MV_U8* pReadBuff, MV_U32 buffSize);
+MV_STATUS mvSFlashFastBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+ MV_U8* pReadBuff, MV_U32 buffSize);
+
+/* write regardless of the page boundaries and size limit per Page program command */
+MV_STATUS mvSFlashBlockWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+ MV_U8* pWriteBuff, MV_U32 buffSize);
+/* Get IDs */
+MV_STATUS mvSFlashIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* pManId, MV_U16* pDevId);
+
+/* Set and Get the Write Protection region - if the Status register is not locked */
+MV_STATUS mvSFlashWpRegionSet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION wpRegion);
+MV_STATUS mvSFlashWpRegionGet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION * pWpRegion);
+
+/* Lock the status register for writing - W/Vpp pin should be low to take effect */
+MV_STATUS mvSFlashStatRegLock (MV_SFLASH_INFO * pFlinfo, MV_BOOL srLock);
+
+/* Get the regions sizes */
+MV_U32 mvSFlashSizeGet (MV_SFLASH_INFO * pFlinfo);
+
+/* Cause the falsh device to go into power save mode */
+MV_STATUS mvSFlashPowerSaveEnter(MV_SFLASH_INFO * pFlinfo);
+MV_STATUS mvSFlashPowerSaveExit (MV_SFLASH_INFO * pFlinfo);
+
+/* Retreive the string with the device manufacturer and model */
+const MV_8 * mvSFlashModelGet (MV_SFLASH_INFO * pFlinfo);
+
+#endif /* __INCmvSFlashH */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSFlashSpecH
+#define __INCmvSFlashSpecH
+
+/* Constants */
+#define MV_SFLASH_READ_CMND_LENGTH 4 /* 1B opcode + 3B address */
+#define MV_SFLASH_SE_CMND_LENGTH 4 /* 1B opcode + 3B address */
+#define MV_SFLASH_BE_CMND_LENGTH 1 /* 1B opcode */
+#define MV_SFLASH_PP_CMND_LENGTH 4 /* 1B opcode + 3B address */
+#define MV_SFLASH_WREN_CMND_LENGTH 1 /* 1B opcode */
+#define MV_SFLASH_WRDI_CMND_LENGTH 1 /* 1B opcode */
+#define MV_SFLASH_RDID_CMND_LENGTH 1 /* 1B opcode */
+#define MV_SFLASH_RDID_REPLY_LENGTH 3 /* 1B manf ID and 2B device ID */
+#define MV_SFLASH_RDSR_CMND_LENGTH 1 /* 1B opcode */
+#define MV_SFLASH_RDSR_REPLY_LENGTH 1 /* 1B status */
+#define MV_SFLASH_WRSR_CMND_LENGTH 2 /* 1B opcode + 1B status value */
+#define MV_SFLASH_DP_CMND_LENGTH 1 /* 1B opcode */
+#define MV_SFLASH_RES_CMND_LENGTH 1 /* 1B opcode */
+
+/* Status Register Bit Masks */
+#define MV_SFLASH_STATUS_REG_WIP_OFFSET 0 /* bit 0; write in progress */
+#define MV_SFLASH_STATUS_REG_WP_OFFSET 2 /* bit 2-4; write protect option */
+#define MV_SFLASH_STATUS_REG_SRWD_OFFSET 7 /* bit 7; lock status register write */
+#define MV_SFLASH_STATUS_REG_WIP_MASK (0x1 << MV_SFLASH_STATUS_REG_WIP_OFFSET)
+#define MV_SFLASH_STATUS_REG_SRWD_MASK (0x1 << MV_SFLASH_STATUS_REG_SRWD_OFFSET)
+
+#define MV_SFLASH_MAX_WAIT_LOOP 1000000
+#define MV_SFLASH_CHIP_ERASE_MAX_WAIT_LOOP 0x50000000
+
+#define MV_SFLASH_DEFAULT_RDID_OPCD 0x9F /* Default Read ID */
+#define MV_SFLASH_DEFAULT_WREN_OPCD 0x06 /* Default Write Enable */
+#define MV_SFLASH_NO_SPECIFIC_OPCD 0x00
+
+/********************************/
+/* ST M25Pxxx Device Specific */
+/********************************/
+
+/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */
+#define MV_M25PXXX_ST_MANF_ID 0x20
+#define MV_M25P32_DEVICE_ID 0x2016
+#define MV_M25P32_MAX_SPI_FREQ 20000000 /* 20MHz */
+#define MV_M25P32_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */
+#define MV_M25P32_FAST_READ_DUMMY_BYTES 1
+#define MV_M25P64_DEVICE_ID 0x2017
+#define MV_M25P64_MAX_SPI_FREQ 20000000 /* 20MHz */
+#define MV_M25P64_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */
+#define MV_M25P64_FAST_READ_DUMMY_BYTES 1
+#define MV_M25P128_DEVICE_ID 0x2018
+#define MV_M25P128_MAX_SPI_FREQ 20000000 /* 20MHz */
+#define MV_M25P128_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */
+#define MV_M25P128_FAST_READ_DUMMY_BYTES 1
+
+
+/* Sector Sizes and population per device model*/
+#define MV_M25P32_SECTOR_SIZE 0x10000 /* 64K */
+#define MV_M25P64_SECTOR_SIZE 0x10000 /* 64K */
+#define MV_M25P128_SECTOR_SIZE 0x40000 /* 256K */
+#define MV_M25P32_SECTOR_NUMBER 64
+#define MV_M25P64_SECTOR_NUMBER 128
+#define MV_M25P128_SECTOR_NUMBER 64
+#define MV_M25P_PAGE_SIZE 0x100 /* 256 byte */
+
+#define MV_M25P_WREN_CMND_OPCD 0x06 /* Write Enable */
+#define MV_M25P_WRDI_CMND_OPCD 0x04 /* Write Disable */
+#define MV_M25P_RDID_CMND_OPCD 0x9F /* Read ID */
+#define MV_M25P_RDSR_CMND_OPCD 0x05 /* Read Status Register */
+#define MV_M25P_WRSR_CMND_OPCD 0x01 /* Write Status Register */
+#define MV_M25P_READ_CMND_OPCD 0x03 /* Sequential Read */
+#define MV_M25P_FAST_RD_CMND_OPCD 0x0B /* Fast Read */
+#define MV_M25P_PP_CMND_OPCD 0x02 /* Page Program */
+#define MV_M25P_SE_CMND_OPCD 0xD8 /* Sector Erase */
+#define MV_M25P_BE_CMND_OPCD 0xC7 /* Bulk Erase */
+#define MV_M25P_RES_CMND_OPCD 0xAB /* Read Electronic Signature */
+
+/* Status Register Write Protect Bit Masks - 3bits */
+#define MV_M25P_STATUS_REG_WP_MASK (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_M25P_STATUS_BP_NONE (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_M25P_STATUS_BP_1_OF_64 (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_M25P_STATUS_BP_1_OF_32 (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_M25P_STATUS_BP_1_OF_16 (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_M25P_STATUS_BP_1_OF_8 (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_M25P_STATUS_BP_1_OF_4 (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_M25P_STATUS_BP_1_OF_2 (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_M25P_STATUS_BP_ALL (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+
+/************************************/
+/* MXIC MX25L6405 Device Specific */
+/************************************/
+
+/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */
+#define MV_MXIC_MANF_ID 0xC2
+#define MV_MX25L6405_DEVICE_ID 0x2017
+#define MV_MX25L6405_MAX_SPI_FREQ 20000000 /* 20MHz */
+#define MV_MX25L6405_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */
+#define MV_MX25L6405_FAST_READ_DUMMY_BYTES 1
+#define MV_MXIC_DP_EXIT_DELAY 30 /* 30 ms */
+
+/* Sector Sizes and population per device model*/
+#define MV_MX25L6405_SECTOR_SIZE 0x10000 /* 64K */
+#define MV_MX25L6405_SECTOR_NUMBER 128
+#define MV_MXIC_PAGE_SIZE 0x100 /* 256 byte */
+
+#define MV_MX25L_WREN_CMND_OPCD 0x06 /* Write Enable */
+#define MV_MX25L_WRDI_CMND_OPCD 0x04 /* Write Disable */
+#define MV_MX25L_RDID_CMND_OPCD 0x9F /* Read ID */
+#define MV_MX25L_RDSR_CMND_OPCD 0x05 /* Read Status Register */
+#define MV_MX25L_WRSR_CMND_OPCD 0x01 /* Write Status Register */
+#define MV_MX25L_READ_CMND_OPCD 0x03 /* Sequential Read */
+#define MV_MX25L_FAST_RD_CMND_OPCD 0x0B /* Fast Read */
+#define MV_MX25L_PP_CMND_OPCD 0x02 /* Page Program */
+#define MV_MX25L_SE_CMND_OPCD 0xD8 /* Sector Erase */
+#define MV_MX25L_BE_CMND_OPCD 0xC7 /* Bulk Erase */
+#define MV_MX25L_DP_CMND_OPCD 0xB9 /* Deep Power Down */
+#define MV_MX25L_RES_CMND_OPCD 0xAB /* Read Electronic Signature */
+
+/* Status Register Write Protect Bit Masks - 4bits */
+#define MV_MX25L_STATUS_REG_WP_MASK (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_MX25L_STATUS_BP_NONE (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_MX25L_STATUS_BP_1_OF_128 (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_MX25L_STATUS_BP_1_OF_64 (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_MX25L_STATUS_BP_1_OF_32 (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_MX25L_STATUS_BP_1_OF_16 (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_MX25L_STATUS_BP_1_OF_8 (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_MX25L_STATUS_BP_1_OF_4 (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_MX25L_STATUS_BP_1_OF_2 (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_MX25L_STATUS_BP_ALL (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET)
+
+/************************************/
+/* SPANSION S25FL128P Device Specific */
+/************************************/
+
+/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */
+#define MV_SPANSION_MANF_ID 0x01
+#define MV_S25FL128_DEVICE_ID 0x2018
+#define MV_S25FL128_MAX_SPI_FREQ 33000000 /* 33MHz */
+#define MV_S25FL128_MAX_FAST_SPI_FREQ 104000000 /* 104MHz */
+#define MV_S25FL128_FAST_READ_DUMMY_BYTES 1
+
+/* Sector Sizes and population per device model*/
+#define MV_S25FL128_SECTOR_SIZE 0x40000 /* 256K */
+#define MV_S25FL128_SECTOR_NUMBER 64
+#define MV_S25FL_PAGE_SIZE 0x100 /* 256 byte */
+
+#define MV_S25FL_WREN_CMND_OPCD 0x06 /* Write Enable */
+#define MV_S25FL_WRDI_CMND_OPCD 0x04 /* Write Disable */
+#define MV_S25FL_RDID_CMND_OPCD 0x9F /* Read ID */
+#define MV_S25FL_RDSR_CMND_OPCD 0x05 /* Read Status Register */
+#define MV_S25FL_WRSR_CMND_OPCD 0x01 /* Write Status Register */
+#define MV_S25FL_READ_CMND_OPCD 0x03 /* Sequential Read */
+#define MV_S25FL_FAST_RD_CMND_OPCD 0x0B /* Fast Read */
+#define MV_S25FL_PP_CMND_OPCD 0x02 /* Page Program */
+#define MV_S25FL_SE_CMND_OPCD 0xD8 /* Sector Erase */
+#define MV_S25FL_BE_CMND_OPCD 0xC7 /* Bulk Erase */
+#define MV_S25FL_DP_CMND_OPCD 0xB9 /* Deep Power Down */
+#define MV_S25FL_RES_CMND_OPCD 0xAB /* Read Electronic Signature */
+
+/* Status Register Write Protect Bit Masks - 4bits */
+#define MV_S25FL_STATUS_REG_WP_MASK (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_S25FL_STATUS_BP_NONE (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_S25FL_STATUS_BP_1_OF_128 (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_S25FL_STATUS_BP_1_OF_64 (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_S25FL_STATUS_BP_1_OF_32 (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_S25FL_STATUS_BP_1_OF_16 (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_S25FL_STATUS_BP_1_OF_8 (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_S25FL_STATUS_BP_1_OF_4 (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_S25FL_STATUS_BP_1_OF_2 (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define MV_S25FL_STATUS_BP_ALL (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET)
+
+#endif /* __INCmvSFlashSpecH */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "spi/mvSpi.h"
+#include "spi/mvSpiSpec.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* #define MV_DEBUG */
+#ifdef MV_DEBUG
+#define DB(x) x
+#define mvOsPrintf printf
+#else
+#define DB(x)
+#endif
+
+
+/*******************************************************************************
+* mvSpi16bitDataTxRx - Transmt and receive data
+*
+* DESCRIPTION:
+* Tx data and block waiting for data to be transmitted
+*
+********************************************************************************/
+static MV_STATUS mvSpi16bitDataTxRx (MV_U16 txData, MV_U16 * pRxData)
+{
+ MV_U32 i;
+ MV_BOOL ready = MV_FALSE;
+
+ /* First clear the bit in the interrupt cause register */
+ MV_REG_WRITE(MV_SPI_INT_CAUSE_REG, 0x0);
+
+ /* Transmit data */
+ MV_REG_WRITE(MV_SPI_DATA_OUT_REG, MV_16BIT_LE(txData));
+
+ /* wait with timeout for memory ready */
+ for (i=0; i<MV_SPI_WAIT_RDY_MAX_LOOP; i++)
+ {
+ if (MV_REG_READ(MV_SPI_INT_CAUSE_REG))
+ {
+ ready = MV_TRUE;
+ break;
+ }
+#ifdef MV_SPI_SLEEP_ON_WAIT
+ mvOsSleep(1);
+#endif /* MV_SPI_SLEEP_ON_WAIT */
+ }
+
+ if (!ready)
+ return MV_TIMEOUT;
+
+ /* check that the RX data is needed */
+ if (pRxData)
+ {
+ if ((MV_U32)pRxData & 0x1) /* check if address is not alligned to 16bit */
+ {
+#if defined(MV_CPU_LE)
+ /* perform the data write to the buffer in two stages with 8bit each */
+ MV_U8 * bptr = (MV_U8*)pRxData;
+ MV_U16 data = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG));
+ *bptr = (data & 0xFF);
+ ++bptr;
+ *bptr = ((data >> 8) & 0xFF);
+
+#elif defined(MV_CPU_BE)
+
+ /* perform the data write to the buffer in two stages with 8bit each */
+ MV_U8 * bptr = (MV_U8 *)pRxData;
+ MV_U16 data = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG));
+ *bptr = ((data >> 8) & 0xFF);
+ ++bptr;
+ *bptr = (data & 0xFF);
+
+#else
+ #error "CPU endianess isn't defined!\n"
+#endif
+
+ }
+ else
+ *pRxData = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG));
+ }
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvSpi8bitDataTxRx - Transmt and receive data (8bits)
+*
+* DESCRIPTION:
+* Tx data and block waiting for data to be transmitted
+*
+********************************************************************************/
+static MV_STATUS mvSpi8bitDataTxRx (MV_U8 txData, MV_U8 * pRxData)
+{
+ MV_U32 i;
+ MV_BOOL ready = MV_FALSE;
+
+ /* First clear the bit in the interrupt cause register */
+ MV_REG_WRITE(MV_SPI_INT_CAUSE_REG, 0x0);
+
+ /* Transmit data */
+ MV_REG_WRITE(MV_SPI_DATA_OUT_REG, txData);
+
+ /* wait with timeout for memory ready */
+ for (i=0; i<MV_SPI_WAIT_RDY_MAX_LOOP; i++)
+ {
+ if (MV_REG_READ(MV_SPI_INT_CAUSE_REG))
+ {
+ ready = MV_TRUE;
+ break;
+ }
+#ifdef MV_SPI_SLEEP_ON_WAIT
+ mvOsSleep(1);
+#endif /* MV_SPI_SLEEP_ON_WAIT */
+ }
+
+ if (!ready)
+ return MV_TIMEOUT;
+
+ /* check that the RX data is needed */
+ if (pRxData)
+ *pRxData = MV_REG_READ(MV_SPI_DATA_IN_REG);
+
+ return MV_OK;
+}
+
+/*
+#####################################################################################
+#####################################################################################
+*/
+
+/*******************************************************************************
+* mvSpiInit - Initialize the SPI controller
+*
+* DESCRIPTION:
+* Perform the neccessary initialization in order to be able to send an
+* receive over the SPI interface.
+*
+* INPUT:
+* serialBaudRate: Baud rate (SPI clock frequency)
+* use16BitMode: Whether to use 2bytes (MV_TRUE) or 1bytes (MV_FALSE)
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiInit (MV_U32 serialBaudRate)
+{
+ MV_STATUS ret;
+
+ /* Set the serial clock */
+ if ((ret = mvSpiBaudRateSet(serialBaudRate)) != MV_OK)
+ return ret;
+
+ /* For devices in which the SPI is muxed on the MPP with other interfaces*/
+ mvMPPConfigToSPI();
+
+ /* Configure the default SPI mode to be 16bit */
+ MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+ /* Fix ac timing on SPI in 6183, 6183L and 78x00 only */
+ if ( (mvCtrlModelGet() == MV_6183_DEV_ID) ||
+ (mvCtrlModelGet() == MV_6183L_DEV_ID) ||
+ (mvCtrlModelGet() == MV_78100_DEV_ID) ||
+ (mvCtrlModelGet() == MV_78200_DEV_ID) ||
+ (mvCtrlModelGet() == MV_76100_DEV_ID))
+ MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, BIT14);
+
+ /* Verify that the CS is deasserted */
+ mvSpiCsDeassert();
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSpiBaudRateSet - Set the Frequency of the SPI clock
+*
+* DESCRIPTION:
+* Set the Prescale bits to adapt to the requested baud rate (the clock
+* used for thr SPI).
+*
+* INPUT:
+* serialBaudRate: Baud rate (SPI clock frequency)
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiBaudRateSet (MV_U32 serialBaudRate)
+{
+ MV_U8 i;
+ /* MV_U8 preScale[32] = {1, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 2, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30};
+ */
+ MV_U8 preScale[14] = { 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30};
+ MV_U8 bestPrescaleIndx = 100;
+ MV_U32 minBaudOffset = 0xFFFFFFFF;
+ MV_U32 cpuClk = mvBoardTclkGet(); /*mvCpuPclkGet();*/
+ MV_U32 tempReg;
+
+ /* Find the best prescale configuration - less or equal */
+ for (i=0; i<14; i++)
+ {
+ /* check for higher - irrelevent */
+ if ((cpuClk / preScale[i]) > serialBaudRate)
+ continue;
+
+ /* check for exact fit */
+ if ((cpuClk / preScale[i]) == serialBaudRate)
+ {
+ bestPrescaleIndx = i;
+ break;
+ }
+
+ /* check if this is better than the previous one */
+ if ((serialBaudRate - (cpuClk / preScale[i])) < minBaudOffset)
+ {
+ minBaudOffset = (serialBaudRate - (cpuClk / preScale[i]));
+ bestPrescaleIndx = i;
+ }
+ }
+
+ if (bestPrescaleIndx > 14)
+ {
+ mvOsPrintf("%s ERROR: SPI baud rate prescale error!\n", __FUNCTION__);
+ return MV_OUT_OF_RANGE;
+ }
+
+ /* configure the Prescale */
+ tempReg = MV_REG_READ(MV_SPI_IF_CONFIG_REG);
+ tempReg = ((tempReg & ~MV_SPI_CLK_PRESCALE_MASK) | (bestPrescaleIndx + 0x12));
+ MV_REG_WRITE(MV_SPI_IF_CONFIG_REG, tempReg);
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSpiCsAssert - Assert the Chip Select pin indicating a new transfer
+*
+* DESCRIPTION:
+* Assert The chip select - used to select an external SPI device
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Success or Error code.
+*
+********************************************************************************/
+MV_VOID mvSpiCsAssert(MV_VOID)
+{
+ /* For devices in which the SPI is muxed on the MPP with other interfaces*/
+ mvMPPConfigToSPI();
+ mvOsUDelay(1);
+ MV_REG_BIT_SET(MV_SPI_IF_CTRL_REG, MV_SPI_CS_ENABLE_MASK);
+}
+
+/*******************************************************************************
+* mvSpiCsDeassert - DeAssert the Chip Select pin indicating the end of a
+* SPI transfer sequence
+*
+* DESCRIPTION:
+* DeAssert the chip select pin
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Success or Error code.
+*
+********************************************************************************/
+MV_VOID mvSpiCsDeassert(MV_VOID)
+{
+ MV_REG_BIT_RESET(MV_SPI_IF_CTRL_REG, MV_SPI_CS_ENABLE_MASK);
+
+ /* For devices in which the SPI is muxed on the MPP with other interfaces*/
+ mvMPPConfigToDefault();
+}
+
+/*******************************************************************************
+* mvSpiRead - Read a buffer over the SPI interface
+*
+* DESCRIPTION:
+* Receive (read) a buffer over the SPI interface in 16bit chunks. If the
+* buffer size is odd, then the last chunk will be 8bits. Chip select is not
+* handled at this level.
+*
+* INPUT:
+* pRxBuff: Pointer to the buffer to hold the received data
+* buffSize: length of the pRxBuff
+*
+* OUTPUT:
+* pRxBuff: Pointer to the buffer with the received data
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiRead (MV_U8* pRxBuff, MV_U32 buffSize)
+{
+ MV_STATUS ret;
+ MV_U32 bytesLeft = buffSize;
+ MV_U16* rxPtr = (MV_U16*)pRxBuff;
+
+ /* check for null parameters */
+ if (pRxBuff == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check that the buffer pointer and the buffer size are 16bit aligned */
+ if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pRxBuff & 1) == 0))
+ {
+ /* Verify that the SPI mode is in 16bit mode */
+ MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+ /* TX/RX as long we have complete 16bit chunks */
+ while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE)
+ {
+ /* Transmitted and wait for the transfer to be completed */
+ if ((ret = mvSpi16bitDataTxRx(MV_SPI_DUMMY_WRITE_16BITS, rxPtr)) != MV_OK)
+ return ret;
+
+ /* increment the pointers */
+ rxPtr++;
+ bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE;
+ }
+
+ }
+ else
+ {
+ /* Verify that the SPI mode is in 8bit mode */
+ MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+ /* TX/RX in 8bit chanks */
+ while (bytesLeft > 0)
+ {
+ /* Transmitted and wait for the transfer to be completed */
+ if ((ret = mvSpi8bitDataTxRx(MV_SPI_DUMMY_WRITE_8BITS, pRxBuff)) != MV_OK)
+ return ret;
+ /* increment the pointers */
+ pRxBuff++;
+ bytesLeft--;
+ }
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvSpiWrite - Transmit a buffer over the SPI interface
+*
+* DESCRIPTION:
+* Transmit a buffer over the SPI interface in 16bit chunks. If the
+* buffer size is odd, then the last chunk will be 8bits. No chip select
+* action is taken.
+*
+* INPUT:
+* pTxBuff: Pointer to the buffer holding the TX data
+* buffSize: length of the pTxBuff
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiWrite(MV_U8* pTxBuff, MV_U32 buffSize)
+{
+ MV_STATUS ret;
+ MV_U32 bytesLeft = buffSize;
+ MV_U16* txPtr = (MV_U16*)pTxBuff;
+
+ /* check for null parameters */
+ if (pTxBuff == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check that the buffer pointer and the buffer size are 16bit aligned */
+ if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pTxBuff & 1) == 0))
+ {
+ /* Verify that the SPI mode is in 16bit mode */
+ MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+ /* TX/RX as long we have complete 16bit chunks */
+ while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE)
+ {
+ /* Transmitted and wait for the transfer to be completed */
+ if ((ret = mvSpi16bitDataTxRx(*txPtr, NULL)) != MV_OK)
+ return ret;
+
+ /* increment the pointers */
+ txPtr++;
+ bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE;
+ }
+ }
+ else
+ {
+
+ /* Verify that the SPI mode is in 8bit mode */
+ MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+ /* TX/RX in 8bit chanks */
+ while (bytesLeft > 0)
+ {
+ /* Transmitted and wait for the transfer to be completed */
+ if ((ret = mvSpi8bitDataTxRx(*pTxBuff, NULL)) != MV_OK)
+ return ret;
+
+ /* increment the pointers */
+ pTxBuff++;
+ bytesLeft--;
+ }
+ }
+
+ return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvSpiReadWrite - Read and Write a buffer simultanuosely
+*
+* DESCRIPTION:
+* Transmit and receive a buffer over the SPI in 16bit chunks. If the
+* buffer size is odd, then the last chunk will be 8bits. The SPI chip
+* select is not handled implicitely.
+*
+* INPUT:
+* pRxBuff: Pointer to the buffer to write the RX info in
+* pTxBuff: Pointer to the buffer holding the TX info
+* buffSize: length of both the pTxBuff and pRxBuff
+*
+* OUTPUT:
+* pRxBuff: Pointer of the buffer holding the RX data
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiReadWrite(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize)
+{
+ MV_STATUS ret;
+ MV_U32 bytesLeft = buffSize;
+ MV_U16* txPtr = (MV_U16*)pTxBuff;
+ MV_U16* rxPtr = (MV_U16*)pRxBuff;
+
+ /* check for null parameters */
+ if ((pRxBuff == NULL) || (pTxBuff == NULL))
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* Check that the buffer pointer and the buffer size are 16bit aligned */
+ if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pTxBuff & 1) == 0) && (((MV_U32)pRxBuff & 1) == 0))
+ {
+ /* Verify that the SPI mode is in 16bit mode */
+ MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+ /* TX/RX as long we have complete 16bit chunks */
+ while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE)
+ {
+ /* Transmitted and wait for the transfer to be completed */
+ if ((ret = mvSpi16bitDataTxRx(*txPtr, rxPtr)) != MV_OK)
+ return ret;
+
+ /* increment the pointers */
+ txPtr++;
+ rxPtr++;
+ bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE;
+ }
+ }
+ else
+ {
+ /* Verify that the SPI mode is in 8bit mode */
+ MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+ /* TX/RX in 8bit chanks */
+ while (bytesLeft > 0)
+ {
+ /* Transmitted and wait for the transfer to be completed */
+ if ( (ret = mvSpi8bitDataTxRx(*pTxBuff, pRxBuff) ) != MV_OK)
+ return ret;
+ pRxBuff++;
+ pTxBuff++;
+ bytesLeft--;
+ }
+ }
+
+ return MV_OK;
+}
+
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSpihH
+#define __INCmvSpihH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+/* Function Prototypes */
+/* Init */
+MV_STATUS mvSpiInit (MV_U32 serialBaudRate);
+
+/* Set the Frequency of the Spi clock */
+MV_STATUS mvSpiBaudRateSet(MV_U32 serialBaudRate);
+
+/* Assert the SPI chip select */
+MV_VOID mvSpiCsAssert (MV_VOID);
+
+/* De-assert the SPI chip select */
+MV_VOID mvSpiCsDeassert (MV_VOID);
+
+/* Simultanuous Read and write */
+MV_STATUS mvSpiReadWrite (MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize);
+
+/* serialize a buffer on the TX line - Rx is ignored */
+MV_STATUS mvSpiWrite (MV_U8* pTxBuff, MV_U32 buffSize);
+
+/* read from the RX line by writing dummy values to the TX line */
+MV_STATUS mvSpiRead (MV_U8* pRxBuff, MV_U32 buffSize);
+
+#endif /* __INCmvSpihH */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "spi/mvSpi.h"
+#include "spi/mvSpiSpec.h"
+
+/*#define MV_DEBUG*/
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+
+/*******************************************************************************
+* mvSpiReadAndWrite - Read and Write a buffer simultanuousely
+*
+* DESCRIPTION:
+* Transmit and receive a buffer over the SPI in 16bit chunks. If the
+* buffer size is odd, then the last chunk will be 8bits.
+*
+* INPUT:
+* pRxBuff: Pointer to the buffer to write the RX info in
+* pTxBuff: Pointer to the buffer holding the TX info
+* buffSize: length of both the pTxBuff and pRxBuff
+*
+* OUTPUT:
+* pRxBuff: Pointer of the buffer holding the RX data
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiReadAndWrite(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize)
+{
+ MV_STATUS ret;
+
+ /* check for null parameters */
+ if ((pRxBuff == NULL) || (pTxBuff == NULL) || (buffSize == 0))
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* First assert the chip select */
+ mvSpiCsAssert();
+
+ ret = mvSpiReadWrite(pRxBuff, pTxBuff, buffSize);
+
+ /* Finally deassert the chip select */
+ mvSpiCsDeassert();
+
+ return ret;
+}
+
+/*******************************************************************************
+* mvSpiWriteThenWrite - Serialize a command followed by the data over the TX line
+*
+* DESCRIPTION:
+* Assert the chip select line. Transmit the command buffer followed by
+* the data buffer. Then deassert the CS line.
+*
+* INPUT:
+* pCmndBuff: Pointer to the command buffer to transmit
+* cmndSize: length of the command size
+* pTxDataBuff: Pointer to the data buffer to transmit
+* txDataSize: length of the data buffer
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiWriteThenWrite (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pTxDataBuff,
+ MV_U32 txDataSize)
+{
+ MV_STATUS ret = MV_OK, tempRet;
+
+ /* check for null parameters */
+#ifndef CONFIG_MARVELL
+ if(NULL == pTxDataBuff)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+#endif
+
+ if (pCmndBuff == NULL)
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* First assert the chip select */
+ mvSpiCsAssert();
+
+ /* first write the command */
+ if ((cmndSize) && (pCmndBuff != NULL))
+ {
+ if ((tempRet = mvSpiWrite(pCmndBuff, cmndSize)) != MV_OK)
+ ret = tempRet;
+ }
+
+ /* Then write the data buffer */
+#ifndef CONFIG_MARVELL
+ if (txDataSize)
+#else
+ if ((txDataSize) && (pTxDataBuff != NULL))
+#endif
+ {
+ if ((tempRet = mvSpiWrite(pTxDataBuff, txDataSize)) != MV_OK)
+ ret = tempRet;
+ }
+
+ /* Finally deassert the chip select */
+ mvSpiCsDeassert();
+
+ return ret;
+}
+
+/*******************************************************************************
+* mvSpiWriteThenRead - Serialize a command then read a data buffer
+*
+* DESCRIPTION:
+* Assert the chip select line. Transmit the command buffer then read
+* the data buffer. Then deassert the CS line.
+*
+* INPUT:
+* pCmndBuff: Pointer to the command buffer to transmit
+* cmndSize: length of the command size
+* pRxDataBuff: Pointer to the buffer to read the data in
+* txDataSize: length of the data buffer
+*
+* OUTPUT:
+* pRxDataBuff: Pointer to the buffer holding the data
+*
+* RETURN:
+* Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiWriteThenRead (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pRxDataBuff,
+ MV_U32 rxDataSize,MV_U32 dummyBytesToRead)
+{
+ MV_STATUS ret = MV_OK, tempRet;
+ MV_U8 dummyByte;
+
+ /* check for null parameters */
+ if ((pCmndBuff == NULL) && (pRxDataBuff == NULL))
+ {
+ mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+ return MV_BAD_PARAM;
+ }
+
+ /* First assert the chip select */
+ mvSpiCsAssert();
+
+ /* first write the command */
+ if ((cmndSize) && (pCmndBuff != NULL))
+ {
+ if ((tempRet = mvSpiWrite(pCmndBuff, cmndSize)) != MV_OK)
+ ret = tempRet;
+ }
+
+ /* Read dummy bytes before real data. */
+ while(dummyBytesToRead)
+ {
+ mvSpiRead(&dummyByte,1);
+ dummyBytesToRead--;
+ }
+
+ /* Then write the data buffer */
+ if ((rxDataSize) && (pRxDataBuff != NULL))
+ {
+ if ((tempRet = mvSpiRead(pRxDataBuff, rxDataSize)) != MV_OK)
+ ret = tempRet;
+ }
+
+ /* Finally deassert the chip select */
+ mvSpiCsDeassert();
+
+ return ret;
+}
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSpiCmndhH
+#define __INCmvSpiCmndhH
+
+#include "mvTypes.h"
+
+/* Function Prototypes */
+
+/* Simultanuous Read and write */
+MV_STATUS mvSpiReadAndWrite (MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize);
+
+/* write command - write a command and then write data */
+MV_STATUS mvSpiWriteThenWrite (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pTxDataBuff, MV_U32 txDataSize);
+
+/* read command - write a command and then read data by writing dummy data */
+MV_STATUS mvSpiWriteThenRead (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pRxDataBuff,
+ MV_U32 rxDataSize,MV_U32 dummyBytesToRead);
+
+#endif /* __INCmvSpiCmndhH */
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSpiSpecH
+#define __INCmvSpiSpecH
+
+/* Constants */
+#define MV_SPI_WAIT_RDY_MAX_LOOP 100000
+#define MV_SPI_16_BIT_CHUNK_SIZE 2
+#define MV_SPI_DUMMY_WRITE_16BITS 0xFFFF
+#define MV_SPI_DUMMY_WRITE_8BITS 0xFF
+
+/* Marvell Flash Device Controller Registers */
+#define MV_SPI_CTRLR_OFST 0x10600
+#define MV_SPI_IF_CTRL_REG (MV_SPI_CTRLR_OFST + 0x00)
+#define MV_SPI_IF_CONFIG_REG (MV_SPI_CTRLR_OFST + 0x04)
+#define MV_SPI_DATA_OUT_REG (MV_SPI_CTRLR_OFST + 0x08)
+#define MV_SPI_DATA_IN_REG (MV_SPI_CTRLR_OFST + 0x0c)
+#define MV_SPI_INT_CAUSE_REG (MV_SPI_CTRLR_OFST + 0x10)
+#define MV_SPI_INT_CAUSE_MASK_REG (MV_SPI_CTRLR_OFST + 0x14)
+
+/* Serial Memory Interface Control Register Masks */
+#define MV_SPI_CS_ENABLE_OFFSET 0 /* bit 0 */
+#define MV_SPI_MEMORY_READY_OFFSET 1 /* bit 1 */
+#define MV_SPI_CS_ENABLE_MASK (0x1 << MV_SPI_CS_ENABLE_OFFSET)
+#define MV_SPI_MEMORY_READY_MASK (0x1 << MV_SPI_MEMORY_READY_OFFSET)
+
+/* Serial Memory Interface Configuration Register Masks */
+#define MV_SPI_CLK_PRESCALE_OFFSET 0 /* bit 0-4 */
+#define MV_SPI_BYTE_LENGTH_OFFSET 5 /* bit 5 */
+#define MV_SPI_ADDRESS_BURST_LENGTH_OFFSET 8 /* bit 8-9 */
+#define MV_SPI_CLK_PRESCALE_MASK (0x1F << MV_SPI_CLK_PRESCALE_OFFSET)
+#define MV_SPI_BYTE_LENGTH_MASK (0x1 << MV_SPI_BYTE_LENGTH_OFFSET)
+#define MV_SPI_ADDRESS_BURST_LENGTH_MASK (0x3 << MV_SPI_ADDRESS_BURST_LENGTH_OFFSET)
+
+#endif /* __INCmvSpiSpecH */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "mvTwsi.h"
+#include "mvTwsiSpec.h"
+#include "cpu/mvCpu.h"
+
+
+/*#define MV_DEBUG*/
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+static MV_VOID twsiIntFlgClr(MV_U8 chanNum);
+static MV_BOOL twsiMainIntGet(MV_U8 chanNum);
+static MV_VOID twsiAckBitSet(MV_U8 chanNum);
+static MV_U32 twsiStsGet(MV_U8 chanNum);
+static MV_VOID twsiReset(MV_U8 chanNum);
+static MV_STATUS twsiAddr7BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command);
+static MV_STATUS twsiAddr10BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command);
+static MV_STATUS twsiDataTransmit(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize);
+static MV_STATUS twsiDataReceive(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize);
+static MV_STATUS twsiTargetOffsSet(MV_U8 chanNum, MV_U32 offset,MV_BOOL moreThen256);
+
+
+static MV_BOOL twsiTimeoutChk(MV_U32 timeout, const MV_8 *pString)
+{
+ if(timeout >= TWSI_TIMEOUT_VALUE)
+ {
+ DB(mvOsPrintf("%s",pString));
+ return MV_TRUE;
+ }
+ return MV_FALSE;
+
+}
+/*******************************************************************************
+* mvTwsiStartBitSet - Set start bit on the bus
+*
+* DESCRIPTION:
+* This routine sets the start bit on the TWSI bus.
+* The routine first checks for interrupt flag condition, then it sets
+* the start bit in the TWSI Control register.
+* If the interrupt flag condition check previously was set, the function
+* will clear it.
+* The function then wait for the start bit to be cleared by the HW.
+* Then it waits for the interrupt flag to be set and eventually, the
+* TWSI status is checked to be 0x8 or 0x10(repeated start bit).
+*
+* INPUT:
+* chanNum - TWSI channel.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_OK is start bit was set successfuly on the bus.
+* MV_FAIL if interrupt flag was set before setting start bit.
+*
+*******************************************************************************/
+MV_STATUS mvTwsiStartBitSet(MV_U8 chanNum)
+{
+ MV_BOOL isIntFlag = MV_FALSE;
+ MV_U32 timeout, temp;
+
+ DB(mvOsPrintf("TWSI: mvTwsiStartBitSet \n"));
+ /* check Int flag */
+ if(twsiMainIntGet(chanNum))
+ isIntFlag = MV_TRUE;
+ /* set start Bit */
+ temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+ MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_START_BIT);
+
+ /* in case that the int flag was set before i.e. repeated start bit */
+ if(isIntFlag){
+ DB(mvOsPrintf("TWSI: mvTwsiStartBitSet repeated start Bit\n"));
+ twsiIntFlgClr(chanNum);
+ }
+
+ /* wait for interrupt */
+ timeout = 0;
+ while(!twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+ /* check for timeout */
+ if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .\n"))
+ return MV_TIMEOUT;
+
+
+ /* check that start bit went down */
+ if((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_START_BIT) != 0)
+ {
+ mvOsPrintf("TWSI: mvTwsiStartBitSet ERROR - start bit didn't went down\n");
+ return MV_FAIL;
+ }
+
+ /* check the status */
+ temp = twsiStsGet(chanNum);
+ if(( temp != TWSI_START_CON_TRA ) && ( temp != TWSI_REPEATED_START_CON_TRA ))
+ {
+ mvOsPrintf("TWSI: mvTwsiStartBitSet ERROR - status %x after Set Start Bit. \n",temp);
+ return MV_FAIL;
+ }
+
+ return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvTwsiStopBitSet - Set stop bit on the bus
+*
+* DESCRIPTION:
+* This routine set the stop bit on the TWSI bus.
+* The function then wait for the stop bit to be cleared by the HW.
+* Finally the function checks for status of 0xF8.
+*
+* INPUT:
+* chanNum - TWSI channel
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE is stop bit was set successfuly on the bus.
+*
+*******************************************************************************/
+MV_STATUS mvTwsiStopBitSet(MV_U8 chanNum)
+{
+ MV_U32 timeout, temp;
+
+ /* Generate stop bit */
+ temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+ MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_STOP_BIT);
+
+ twsiIntFlgClr(chanNum);
+
+ /* wait for stop bit to come down */
+ timeout = 0;
+ while( ((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_STOP_BIT) != 0) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+ /* check for timeout */
+ if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .\n"))
+ return MV_TIMEOUT;
+
+ /* check that the stop bit went down */
+ if((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_STOP_BIT) != 0)
+ {
+ mvOsPrintf("TWSI: mvTwsiStopBitSet ERROR - stop bit didn't went down. \n");
+ return MV_FAIL;
+ }
+
+ /* check the status */
+ temp = twsiStsGet(chanNum);
+ if( temp != TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0){
+ mvOsPrintf("TWSI: mvTwsiStopBitSet ERROR - status %x after Stop Bit. \n", temp);
+ return MV_FAIL;
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* twsiMainIntGet - Get twsi bit from main Interrupt cause.
+*
+* DESCRIPTION:
+* This routine returns the twsi interrupt flag value.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_TRUE is interrupt flag is set, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL twsiMainIntGet(MV_U8 chanNum)
+{
+ MV_U32 temp;
+
+ /* get the int flag bit */
+
+ temp = MV_REG_READ(TWSI_CPU_MAIN_INT_CAUSE_REG);
+ if (temp & (TWSI0_CPU_MAIN_INT_BIT << chanNum))
+ return MV_TRUE;
+
+ return MV_FALSE;
+}
+/*******************************************************************************
+* twsiIntFlgClr - Clear Interrupt flag.
+*
+* DESCRIPTION:
+* This routine clears the interrupt flag. It does NOT poll the interrupt
+* to make sure the clear. After clearing the interrupt, it waits for at
+* least 1 miliseconds.
+*
+* INPUT:
+* chanNum - TWSI channel
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static MV_VOID twsiIntFlgClr(MV_U8 chanNum)
+{
+ MV_U32 temp;
+
+ /* wait for 1 mili to prevent TWSI register write after write problems */
+ mvOsDelay(1);
+ /* clear the int flag bit */
+ temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+ MV_REG_WRITE(TWSI_CONTROL_REG(chanNum),temp & ~(TWSI_CONTROL_INT_FLAG_SET));
+
+ /* wait for 1 mili sec for the clear to take effect */
+ mvOsDelay(1);
+
+ return;
+}
+
+
+/*******************************************************************************
+* twsiAckBitSet - Set acknowledge bit on the bus
+*
+* DESCRIPTION:
+* This routine set the acknowledge bit on the TWSI bus.
+*
+* INPUT:
+* None.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None.
+*
+*******************************************************************************/
+static MV_VOID twsiAckBitSet(MV_U8 chanNum)
+{
+ MV_U32 temp;
+
+ /*Set the Ack bit */
+ temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+ MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_ACK);
+
+ /* Add delay of 1ms */
+ mvOsDelay(1);
+ return;
+}
+
+
+/*******************************************************************************
+* twsiInit - Initialize TWSI interface
+*
+* DESCRIPTION:
+* This routine:
+* -Reset the TWSI.
+* -Initialize the TWSI clock baud rate according to given frequancy
+* parameter based on Tclk frequancy and enables TWSI slave.
+* -Set the ack bit.
+* -Assign the TWSI slave address according to the TWSI address Type.
+*
+*
+* INPUT:
+* chanNum - TWSI channel
+* frequancy - TWSI frequancy in KHz. (up to 100KHZ)
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* Actual frequancy.
+*
+*******************************************************************************/
+MV_U32 mvTwsiInit(MV_U8 chanNum, MV_HZ frequancy, MV_U32 Tclk, MV_TWSI_ADDR *pTwsiAddr, MV_BOOL generalCallEnable)
+{
+ MV_U32 n,m,freq,margin,minMargin = 0xffffffff;
+ MV_U32 power;
+ MV_U32 actualFreq = 0,actualN = 0,actualM = 0,val;
+
+ if(frequancy > 100000)
+ {
+ mvOsPrintf("Warning TWSI frequancy is too high, please use up tp 100Khz. \n");
+ }
+
+ DB(mvOsPrintf("TWSI: mvTwsiInit - Tclk = %d freq = %d\n",Tclk,frequancy));
+ /* Calucalte N and M for the TWSI clock baud rate */
+ for(n = 0 ; n < 8 ; n++)
+ {
+ for(m = 0 ; m < 16 ; m++)
+ {
+ power = 2 << n; /* power = 2^(n+1) */
+ freq = Tclk/(10*(m+1)*power);
+ margin = MV_ABS(frequancy - freq);
+ if(margin < minMargin)
+ {
+ minMargin = margin;
+ actualFreq = freq;
+ actualN = n;
+ actualM = m;
+ }
+ }
+ }
+ DB(mvOsPrintf("TWSI: mvTwsiInit - actN %d actM %d actFreq %d\n",actualN , actualM, actualFreq));
+ /* Reset the TWSI logic */
+ twsiReset(chanNum);
+
+ /* Set the baud rate */
+ val = ((actualM<< TWSI_BAUD_RATE_M_OFFS) | actualN << TWSI_BAUD_RATE_N_OFFS);
+ MV_REG_WRITE(TWSI_STATUS_BAUDE_RATE_REG(chanNum),val);
+
+ /* Enable the TWSI and slave */
+ MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), TWSI_CONTROL_ENA | TWSI_CONTROL_ACK);
+
+ /* set the TWSI slave address */
+ if( pTwsiAddr->type == ADDR10_BIT )/* 10 Bit deviceAddress */
+ {
+ /* writing the 2 most significant bits of the 10 bit address*/
+ val = ((pTwsiAddr->address & TWSI_SLAVE_ADDR_10BIT_MASK) >> TWSI_SLAVE_ADDR_10BIT_OFFS );
+ /* bits 7:3 must be 0x11110 */
+ val |= TWSI_SLAVE_ADDR_10BIT_CONST;
+ /* set GCE bit */
+ if(generalCallEnable)
+ val |= TWSI_SLAVE_ADDR_GCE_ENA;
+ /* write slave address */
+ MV_REG_WRITE(TWSI_SLAVE_ADDR_REG(chanNum),val);
+
+ /* writing the 8 least significant bits of the 10 bit address*/
+ val = (pTwsiAddr->address << TWSI_EXTENDED_SLAVE_OFFS) & TWSI_EXTENDED_SLAVE_MASK;
+ MV_REG_WRITE(TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum), val);
+ }
+ else /*7 bit address*/
+ {
+ /* set the 7 Bits address */
+ MV_REG_WRITE(TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum),0x0);
+ val = (pTwsiAddr->address << TWSI_SLAVE_ADDR_7BIT_OFFS) & TWSI_SLAVE_ADDR_7BIT_MASK;
+ MV_REG_WRITE(TWSI_SLAVE_ADDR_REG(chanNum), val);
+ }
+
+ /* unmask twsi int */
+ val = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+ MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), val | TWSI_CONTROL_INT_ENA);
+ /* Add delay of 1ms */
+ mvOsDelay(1);
+
+ return actualFreq;
+}
+
+
+/*******************************************************************************
+* twsiStsGet - Get the TWSI status value.
+*
+* DESCRIPTION:
+* This routine returns the TWSI status value.
+*
+* INPUT:
+* chanNum - TWSI channel
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_U32 - the TWSI status.
+*
+*******************************************************************************/
+static MV_U32 twsiStsGet(MV_U8 chanNum)
+{
+ return MV_REG_READ(TWSI_STATUS_BAUDE_RATE_REG(chanNum));
+
+}
+
+/*******************************************************************************
+* twsiReset - Reset the TWSI.
+*
+* DESCRIPTION:
+* Resets the TWSI logic and sets all TWSI registers to their reset values.
+*
+* INPUT:
+* chanNum - TWSI channel
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* None
+*
+*******************************************************************************/
+static MV_VOID twsiReset(MV_U8 chanNum)
+{
+ /* Reset the TWSI logic */
+ MV_REG_WRITE(TWSI_SOFT_RESET_REG(chanNum),0);
+
+ /* wait for 2 mili sec */
+ mvOsDelay(2);
+
+ return;
+}
+
+
+
+
+/******************************* POLICY ****************************************/
+
+
+
+/*******************************************************************************
+* mvTwsiAddrSet - Set address on TWSI bus.
+*
+* DESCRIPTION:
+* This function Set address (7 or 10 Bit address) on the Twsi Bus.
+*
+* INPUT:
+* chanNum - TWSI channel
+* pTwsiAddr - twsi address.
+* command - read / write .
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_OK - if setting the address completed succesfully.
+* MV_FAIL otherwmise.
+*
+*******************************************************************************/
+MV_STATUS mvTwsiAddrSet(MV_U8 chanNum, MV_TWSI_ADDR *pTwsiAddr, MV_TWSI_CMD command)
+{
+ DB(mvOsPrintf("TWSI: mvTwsiAddr7BitSet addr %x , type %d, cmd is %s\n",pTwsiAddr->address,\
+ pTwsiAddr->type, ((command==MV_TWSI_WRITE)?"Write":"Read") ));
+ /* 10 Bit address */
+ if(pTwsiAddr->type == ADDR10_BIT)
+ {
+ return twsiAddr10BitSet(chanNum, pTwsiAddr->address,command);
+ }
+ /* 7 Bit address */
+ else
+ {
+ return twsiAddr7BitSet(chanNum, pTwsiAddr->address,command);
+ }
+
+}
+
+/*******************************************************************************
+* twsiAddr10BitSet - Set 10 Bit address on TWSI bus.
+*
+* DESCRIPTION:
+* There are two address phases:
+* 1) Write '11110' to data register bits [7:3] and 10-bit address MSB
+* (bits [9:8]) to data register bits [2:1] plus a write(0) or read(1) bit
+* to the Data register. Then it clears interrupt flag which drive
+* the address on the TWSI bus. The function then waits for interrupt
+* flag to be active and status 0x18 (write) or 0x40 (read) to be set.
+* 2) write the rest of 10-bit address to data register and clears
+* interrupt flag which drive the address on the TWSI bus. The
+* function then waits for interrupt flag to be active and status
+* 0xD0 (write) or 0xE0 (read) to be set.
+*
+* INPUT:
+* chanNum - TWSI channel
+* deviceAddress - twsi address.
+* command - read / write .
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_OK - if setting the address completed succesfully.
+* MV_FAIL otherwmise.
+*
+*******************************************************************************/
+static MV_STATUS twsiAddr10BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command)
+{
+ MV_U32 val,timeout;
+
+ /* writing the 2 most significant bits of the 10 bit address*/
+ val = ((deviceAddress & TWSI_DATA_ADDR_10BIT_MASK) >> TWSI_DATA_ADDR_10BIT_OFFS );
+ /* bits 7:3 must be 0x11110 */
+ val |= TWSI_DATA_ADDR_10BIT_CONST;
+ /* set command */
+ val |= command;
+ MV_REG_WRITE(TWSI_DATA_REG(chanNum), val);
+ /* WA add a delay */
+ mvOsDelay(1);
+
+ /* clear Int flag */
+ twsiIntFlgClr(chanNum);
+
+ /* wait for Int to be Set */
+ timeout = 0;
+ while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+ /* check for timeout */
+ if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr10BitSet ERROR - 1st addr (10Bit) Int TimeOut.\n"))
+ return MV_TIMEOUT;
+
+ /* check the status */
+ val = twsiStsGet(chanNum);
+ if(( (val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) ||
+ ( (val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) ))
+ {
+ mvOsPrintf("TWSI: twsiAddr10BitSet ERROR - status %x 1st addr (10 Bit) in %s mode.\n"\
+ ,val, ((command==MV_TWSI_WRITE)?"Write":"Read") );
+ return MV_FAIL;
+ }
+
+ /* set 8 LSB of the address */
+ val = (deviceAddress << TWSI_DATA_ADDR_7BIT_OFFS) & TWSI_DATA_ADDR_7BIT_MASK;
+ MV_REG_WRITE(TWSI_DATA_REG(chanNum), val);
+
+ /* clear Int flag */
+ twsiIntFlgClr(chanNum);
+
+ /* wait for Int to be Set */
+ timeout = 0;
+ while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+ /* check for timeout */
+ if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr10BitSet ERROR - 2nd (10 Bit) Int TimOut.\n"))
+ return MV_TIMEOUT;
+
+ /* check the status */
+ val = twsiStsGet(chanNum);
+ if(( (val != TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) ||
+ ( (val != TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) ))
+ {
+ mvOsPrintf("TWSI: twsiAddr10BitSet ERROR - status %x 2nd addr(10 Bit) in %s mode.\n"\
+ ,val, ((command==MV_TWSI_WRITE)?"Write":"Read") );
+ return MV_FAIL;
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* twsiAddr7BitSet - Set 7 Bit address on TWSI bus.
+*
+* DESCRIPTION:
+* This function writes 7 bit address plus a write or read bit to the
+* Data register. Then it clears interrupt flag which drive the address on
+* the TWSI bus. The function then waits for interrupt flag to be active
+* and status 0x18 (write) or 0x40 (read) to be set.
+*
+* INPUT:
+* chanNum - TWSI channel
+* deviceAddress - twsi address.
+* command - read / write .
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_OK - if setting the address completed succesfully.
+* MV_FAIL otherwmise.
+*
+*******************************************************************************/
+static MV_STATUS twsiAddr7BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command)
+{
+ MV_U32 val,timeout;
+
+ /* set the address */
+ val = (deviceAddress << TWSI_DATA_ADDR_7BIT_OFFS) & TWSI_DATA_ADDR_7BIT_MASK;
+ /* set command */
+ val |= command;
+ MV_REG_WRITE(TWSI_DATA_REG(chanNum), val);
+ /* WA add a delay */
+ mvOsDelay(1);
+
+ /* clear Int flag */
+ twsiIntFlgClr(chanNum);
+
+ /* wait for Int to be Set */
+ timeout = 0;
+ while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+ /* check for timeout */
+ if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr7BitSet ERROR - Addr (7 Bit) int TimeOut.\n"))
+ return MV_TIMEOUT;
+
+ /* check the status */
+ val = twsiStsGet(chanNum);
+ if(( (val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) ||
+ ( (val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) ))
+ {
+ /* only in debug, since in boot we try to read the SPD of both DRAM, and we don't
+ want error messeges in case DIMM doesn't exist. */
+ DB(mvOsPrintf("TWSI: twsiAddr7BitSet ERROR - status %x addr (7 Bit) in %s mode.\n"\
+ ,val,((command==MV_TWSI_WRITE)?"Write":"Read") ));
+ return MV_FAIL;
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* twsiDataWrite - Trnasmit a data block over TWSI bus.
+*
+* DESCRIPTION:
+* This function writes a given data block to TWSI bus in 8 bit granularity.
+* first The function waits for interrupt flag to be active then
+* For each 8-bit data:
+* The function writes data to data register. It then clears
+* interrupt flag which drives the data on the TWSI bus.
+* The function then waits for interrupt flag to be active and status
+* 0x28 to be set.
+*
+*
+* INPUT:
+* chanNum - TWSI channel
+* pBlock - Data block.
+* blockSize - number of chars in pBlock.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_OK - if transmiting the block completed succesfully,
+* MV_BAD_PARAM - if pBlock is NULL,
+* MV_FAIL otherwmise.
+*
+*******************************************************************************/
+static MV_STATUS twsiDataTransmit(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize)
+{
+ MV_U32 timeout, temp, blockSizeWr = blockSize;
+
+ if(NULL == pBlock)
+ return MV_BAD_PARAM;
+
+ /* wait for Int to be Set */
+ timeout = 0;
+ while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+ /* check for timeout */
+ if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataTransmit ERROR - Read Data Int TimeOut.\n"))
+ return MV_TIMEOUT;
+
+ while(blockSizeWr)
+ {
+ /* write the data*/
+ MV_REG_WRITE(TWSI_DATA_REG(chanNum),(MV_U32)*pBlock);
+ DB(mvOsPrintf("TWSI: twsiDataTransmit place = %d write %x \n",\
+ blockSize - blockSizeWr, *pBlock));
+ pBlock++;
+ blockSizeWr--;
+
+ twsiIntFlgClr(chanNum);
+
+ /* wait for Int to be Set */
+ timeout = 0;
+ while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+ /* check for timeout */
+ if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataTransmit ERROR - Read Data Int TimeOut.\n"))
+ return MV_TIMEOUT;
+
+ /* check the status */
+ temp = twsiStsGet(chanNum);
+ if(temp != TWSI_M_TRAN_DATA_BYTE_ACK_REC)
+ {
+ mvOsPrintf("TWSI: twsiDataTransmit ERROR - status %x in write trans\n",temp);
+ return MV_FAIL;
+ }
+
+ }
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* twsiDataReceive - Receive data block from TWSI bus.
+*
+* DESCRIPTION:
+* This function receive data block from TWSI bus in 8bit granularity
+* into pBlock buffer.
+* first The function waits for interrupt flag to be active then
+* For each 8-bit data:
+* It clears the interrupt flag which allows the next data to be
+* received from TWSI bus.
+* The function waits for interrupt flag to be active,
+* and status reg is 0x50.
+* Then the function reads data from data register, and copies it to
+* the given buffer.
+*
+* INPUT:
+* chanNum - TWSI channel
+* blockSize - number of bytes to read.
+*
+* OUTPUT:
+* pBlock - Data block.
+*
+* RETURN:
+* MV_OK - if receive transaction completed succesfully,
+* MV_BAD_PARAM - if pBlock is NULL,
+* MV_FAIL otherwmise.
+*
+*******************************************************************************/
+static MV_STATUS twsiDataReceive(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize)
+{
+ MV_U32 timeout, temp, blockSizeRd = blockSize;
+ if(NULL == pBlock)
+ return MV_BAD_PARAM;
+
+ /* wait for Int to be Set */
+ timeout = 0;
+ while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+ /* check for timeout */
+ if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataReceive ERROR - Read Data int Time out .\n"))
+ return MV_TIMEOUT;
+
+ while(blockSizeRd)
+ {
+ if(blockSizeRd == 1)
+ {
+ /* clear ack and Int flag */
+ temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+ temp &= ~(TWSI_CONTROL_ACK);
+ MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp);
+ }
+ twsiIntFlgClr(chanNum);
+ /* wait for Int to be Set */
+ timeout = 0;
+ while( (!twsiMainIntGet(chanNum)) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+ /* check for timeout */
+ if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataReceive ERROR - Read Data Int Time out .\n"))
+ return MV_TIMEOUT;
+
+ /* check the status */
+ temp = twsiStsGet(chanNum);
+ if((temp != TWSI_M_REC_RD_DATA_ACK_TRA) && (blockSizeRd !=1))
+ {
+ mvOsPrintf("TWSI: twsiDataReceive ERROR - status %x in read trans \n",temp);
+ return MV_FAIL;
+ }
+ else if((temp != TWSI_M_REC_RD_DATA_ACK_NOT_TRA) && (blockSizeRd ==1))
+ {
+ mvOsPrintf("TWSI: twsiDataReceive ERROR - status %x in Rd Terminate\n",temp);
+ return MV_FAIL;
+ }
+
+ /* read the data*/
+ *pBlock = (MV_U8)MV_REG_READ(TWSI_DATA_REG(chanNum));
+ DB(mvOsPrintf("TWSI: twsiDataReceive place %d read %x \n",\
+ blockSize - blockSizeRd,*pBlock));
+ pBlock++;
+ blockSizeRd--;
+ }
+
+ return MV_OK;
+}
+
+
+
+/*******************************************************************************
+* twsiTargetOffsSet - Set TWST target offset on TWSI bus.
+*
+* DESCRIPTION:
+* The function support TWSI targets that have inside address space (for
+* example EEPROMs). The function:
+* 1) Convert the given offset into pBlock and size.
+* in case the offset should be set to a TWSI slave which support
+* more then 256 bytes offset, the offset setting will be done
+* in 2 transactions.
+* 2) Use twsiDataTransmit to place those on the bus.
+*
+* INPUT:
+* chanNum - TWSI channel
+* offset - offset to be set on the EEPROM device.
+* moreThen256 - whether the EEPROM device support more then 256 byte offset.
+*
+* OUTPUT:
+* None.
+*
+* RETURN:
+* MV_OK - if setting the offset completed succesfully.
+* MV_FAIL otherwmise.
+*
+*******************************************************************************/
+static MV_STATUS twsiTargetOffsSet(MV_U8 chanNum, MV_U32 offset, MV_BOOL moreThen256)
+{
+ MV_U8 offBlock[2];
+ MV_U32 offSize;
+
+ if(moreThen256 == MV_TRUE)
+ {
+ offBlock[0] = (offset >> 8) & 0xff;
+ offBlock[1] = offset & 0xff;
+ offSize = 2;
+ }
+ else
+ {
+ offBlock[0] = offset & 0xff;
+ offSize = 1;
+ }
+ DB(mvOsPrintf("TWSI: twsiTargetOffsSet offSize = %x addr1 = %x addr2 = %x\n",\
+ offSize,offBlock[0],offBlock[1]));
+ return twsiDataTransmit(chanNum, offBlock, offSize);
+
+}
+
+/*******************************************************************************
+* mvTwsiRead - Read data block from a TWSI Slave.
+*
+* DESCRIPTION:
+* The function calls the following functions:
+* -) mvTwsiStartBitSet();
+* if(EEPROM device)
+* -) mvTwsiAddrSet(w);
+* -) twsiTargetOffsSet();
+* -) mvTwsiStartBitSet();
+* -) mvTwsiAddrSet(r);
+* -) twsiDataReceive();
+* -) mvTwsiStopBitSet();
+*
+* INPUT:
+* chanNum - TWSI channel
+* pTwsiSlave - Twsi Slave structure.
+* blockSize - number of bytes to read.
+*
+* OUTPUT:
+* pBlock - Data block.
+*
+* RETURN:
+* MV_OK - if EEPROM read transaction completed succesfully,
+* MV_BAD_PARAM - if pBlock is NULL,
+* MV_FAIL otherwmise.
+*
+*******************************************************************************/
+MV_STATUS mvTwsiRead(MV_U8 chanNum, MV_TWSI_SLAVE *pTwsiSlave, MV_U8 *pBlock, MV_U32 blockSize)
+{
+ if((NULL == pBlock) || (NULL == pTwsiSlave))
+ return MV_BAD_PARAM;
+ if(MV_OK != mvTwsiStartBitSet(chanNum))
+ {
+ mvTwsiStopBitSet(chanNum);
+ return MV_FAIL;
+ }
+
+ DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStartBitSet\n"));
+
+ /* in case offset exsist (i.e. eeprom ) */
+ if(MV_TRUE == pTwsiSlave->validOffset)
+ {
+ if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_WRITE))
+ {
+ mvTwsiStopBitSet(chanNum);
+ return MV_FAIL;
+ }
+ DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiAddrSet\n"));
+ if(MV_OK != twsiTargetOffsSet(chanNum, pTwsiSlave->offset, pTwsiSlave->moreThen256))
+ {
+ mvTwsiStopBitSet(chanNum);
+ return MV_FAIL;
+ }
+ DB(mvOsPrintf("TWSI: mvTwsiEepromRead after twsiTargetOffsSet\n"));
+ if(MV_OK != mvTwsiStartBitSet(chanNum))
+ {
+ mvTwsiStopBitSet(chanNum);
+ return MV_FAIL;
+ }
+ DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStartBitSet\n"));
+ }
+ if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_READ))
+ {
+ mvTwsiStopBitSet(chanNum);
+ return MV_FAIL;
+ }
+ DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiAddrSet\n"));
+ if(MV_OK != twsiDataReceive(chanNum, pBlock, blockSize))
+ {
+ mvTwsiStopBitSet(chanNum);
+ return MV_FAIL;
+ }
+ DB(mvOsPrintf("TWSI: mvTwsiEepromRead after twsiDataReceive\n"));
+
+ if(MV_OK != mvTwsiStopBitSet(chanNum))
+ {
+ return MV_FAIL;
+ }
+
+ twsiAckBitSet(chanNum);
+
+ DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStopBitSet\n"));
+
+ return MV_OK;
+}
+
+/*******************************************************************************
+* mvTwsiWrite - Write data block to a TWSI Slave.
+*
+* DESCRIPTION:
+* The function calls the following functions:
+* -) mvTwsiStartBitSet();
+* -) mvTwsiAddrSet();
+* -)if(EEPROM device)
+* -) twsiTargetOffsSet();
+* -) twsiDataTransmit();
+* -) mvTwsiStopBitSet();
+*
+* INPUT:
+* chanNum - TWSI channel
+* eepromAddress - eeprom address.
+* blockSize - number of bytes to write.
+* pBlock - Data block.
+*
+* OUTPUT:
+* None
+*
+* RETURN:
+* MV_OK - if EEPROM read transaction completed succesfully.
+* MV_BAD_PARAM - if pBlock is NULL,
+* MV_FAIL otherwmise.
+*
+* NOTE: Part of the EEPROM, required that the offset will be aligned to the
+* max write burst supported.
+*******************************************************************************/
+MV_STATUS mvTwsiWrite(MV_U8 chanNum, MV_TWSI_SLAVE *pTwsiSlave, MV_U8 *pBlock, MV_U32 blockSize)
+{
+ if((NULL == pBlock) || (NULL == pTwsiSlave))
+ return MV_BAD_PARAM;
+
+ if(MV_OK != mvTwsiStartBitSet(chanNum))
+ {
+ mvTwsiStopBitSet(chanNum);
+ return MV_FAIL;
+ }
+
+ DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after mvTwsiStartBitSet\n"));
+ if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_WRITE))
+ {
+ mvTwsiStopBitSet(chanNum);
+ return MV_FAIL;
+ }
+ DB(mvOsPrintf("TWSI :mvTwsiEepromWrite after mvTwsiAddrSet\n"));
+
+ /* in case offset exsist (i.e. eeprom ) */
+ if(MV_TRUE == pTwsiSlave->validOffset)
+ {
+ if(MV_OK != twsiTargetOffsSet(chanNum, pTwsiSlave->offset, pTwsiSlave->moreThen256))
+ {
+ mvTwsiStopBitSet(chanNum);
+ return MV_FAIL;
+ }
+ DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after twsiTargetOffsSet\n"));
+ }
+ if(MV_OK != twsiDataTransmit(chanNum, pBlock, blockSize))
+ {
+ mvTwsiStopBitSet(chanNum);
+ return MV_FAIL;
+ }
+ DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after twsiDataTransmit\n"));
+ if(MV_OK != mvTwsiStopBitSet(chanNum))
+ {
+ return MV_FAIL;
+ }
+ DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after mvTwsiStopBitSet\n"));
+
+ return MV_OK;
+}
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __INCmvTwsiH
+#define __INCmvTwsiH
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* need to update this includes */
+#include "twsi/mvTwsiSpec.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+
+/* The TWSI interface supports both 7-bit and 10-bit addressing. */
+/* This enumerator describes addressing type. */
+typedef enum _mvTwsiAddrType
+{
+ ADDR7_BIT, /* 7 bit address */
+ ADDR10_BIT /* 10 bit address */
+}MV_TWSI_ADDR_TYPE;
+
+/* This structure describes TWSI address. */
+typedef struct _mvTwsiAddr
+{
+ MV_U32 address; /* address */
+ MV_TWSI_ADDR_TYPE type; /* Address type */
+}MV_TWSI_ADDR;
+
+/* This structure describes a TWSI slave. */
+typedef struct _mvTwsiSlave
+{
+ MV_TWSI_ADDR slaveAddr;
+ MV_BOOL validOffset; /* whether the slave has offset (i.e. Eeprom etc.) */
+ MV_U32 offset; /* offset in the slave. */
+ MV_BOOL moreThen256; /* whether the ofset is bigger then 256 */
+}MV_TWSI_SLAVE;
+
+/* This enumerator describes TWSI protocol commands. */
+typedef enum _mvTwsiCmd
+{
+ MV_TWSI_WRITE, /* TWSI write command - 0 according to spec */
+ MV_TWSI_READ /* TWSI read command - 1 according to spec */
+}MV_TWSI_CMD;
+
+MV_STATUS mvTwsiStartBitSet(MV_U8 chanNum);
+MV_STATUS mvTwsiStopBitSet(MV_U8 chanNum);
+MV_STATUS mvTwsiAddrSet(MV_U8 chanNum, MV_TWSI_ADDR *twsiAddr, MV_TWSI_CMD command);
+
+MV_U32 mvTwsiInit(MV_U8 chanNum, MV_KHZ frequancy, MV_U32 Tclk, MV_TWSI_ADDR *twsiAddr, MV_BOOL generalCallEnable);
+MV_STATUS mvTwsiRead (MV_U8 chanNum, MV_TWSI_SLAVE *twsiSlave, MV_U8 *pBlock, MV_U32 blockSize);
+MV_STATUS mvTwsiWrite(MV_U8 chanNum, MV_TWSI_SLAVE *twsiSlave, MV_U8 *pBlock, MV_U32 blockSize);
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvTwsiH */
+
--- /dev/null
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms. Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED. The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/****************************************/
+/* TWSI Registers */
+/****************************************/
+#ifndef __INCmvTwsiSpech
+#define __INCmvTwsiSpech
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines */
+#define TWSI_SLAVE_ADDR_REG(chanNum) (TWSI_SLAVE_BASE(chanNum)+ 0x00)
+
+#define TWSI_SLAVE_ADDR_GCE_ENA BIT0
+#define TWSI_SLAVE_ADDR_7BIT_OFFS 0x1
+#define TWSI_SLAVE_ADDR_7BIT_MASK (0xFF << TWSI_SLAVE_ADDR_7BIT_OFFS)
+#define TWSI_SLAVE_ADDR_10BIT_OFFS 0x7
+#define TWSI_SLAVE_ADDR_10BIT_MASK 0x300
+#define TWSI_SLAVE_ADDR_10BIT_CONST 0xF0
+
+
+#define TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x10)
+#define TWSI_EXTENDED_SLAVE_OFFS 0
+#define TWSI_EXTENDED_SLAVE_MASK (0xFF << TWSI_EXTENDED_SLAVE_OFFS)
+
+
+#define TWSI_DATA_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x04)
+#define TWSI_DATA_COMMAND_OFFS 0x0
+#define TWSI_DATA_COMMAND_MASK (0x1 << TWSI_DATA_COMMAND_OFFS)
+#define TWSI_DATA_COMMAND_WR (0x1 << TWSI_DATA_COMMAND_OFFS)
+#define TWSI_DATA_COMMAND_RD (0x0 << TWSI_DATA_COMMAND_OFFS)
+#define TWSI_DATA_ADDR_7BIT_OFFS 0x1
+#define TWSI_DATA_ADDR_7BIT_MASK (0xFF << TWSI_DATA_ADDR_7BIT_OFFS)
+#define TWSI_DATA_ADDR_10BIT_OFFS 0x7
+#define TWSI_DATA_ADDR_10BIT_MASK 0x300
+#define TWSI_DATA_ADDR_10BIT_CONST 0xF0
+
+
+#define TWSI_CONTROL_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x08)
+#define TWSI_CONTROL_ACK BIT2
+#define TWSI_CONTROL_INT_FLAG_SET BIT3
+#define TWSI_CONTROL_STOP_BIT BIT4
+#define TWSI_CONTROL_START_BIT BIT5
+#define TWSI_CONTROL_ENA BIT6
+#define TWSI_CONTROL_INT_ENA BIT7
+
+
+#define TWSI_STATUS_BAUDE_RATE_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x0c)
+#define TWSI_BAUD_RATE_N_OFFS 0
+#define TWSI_BAUD_RATE_N_MASK (0x7 << TWSI_BAUD_RATE_N_OFFS)
+#define TWSI_BAUD_RATE_M_OFFS 3
+#define TWSI_BAUD_RATE_M_MASK (0xF << TWSI_BAUD_RATE_M_OFFS)
+
+#define TWSI_SOFT_RESET_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x1c)
+
+/* defines */
+#define TWSI_TIMEOUT_VALUE 0x500
+
+/* TWSI status codes */
+#define TWSI_BUS_ERROR 0x00
+#define TWSI_START_CON_TRA 0x08
+#define TWSI_REPEATED_START_CON_TRA 0x10
+#define TWSI_AD_PLS_WR_BIT_TRA_ACK_REC 0x18
+#define TWSI_AD_PLS_WR_BIT_TRA_ACK_NOT_REC 0x20
+#define TWSI_M_TRAN_DATA_BYTE_ACK_REC 0x28
+#define TWSI_M_TRAN_DATA_BYTE_ACK_NOT_REC 0x30
+#define TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA 0x38
+#define TWSI_AD_PLS_RD_BIT_TRA_ACK_REC 0x40
+#define TWSI_AD_PLS_RD_BIT_TRA_ACK_NOT_REC 0x48
+#define TWSI_M_REC_RD_DATA_ACK_TRA 0x50
+#define TWSI_M_REC_RD_DATA_ACK_NOT_TRA 0x58
+#define TWSI_SLA_REC_AD_PLS_WR_BIT_ACK_TRA 0x60
+#define TWSI_M_LOST_ARB_DUR_AD_TRA_AD_IS_TRGT_TO_SLA_ACK_TRA_W 0x68
+#define TWSI_GNL_CALL_REC_ACK_TRA 0x70
+#define TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA 0x78
+#define TWSI_SLA_REC_WR_DATA_AF_REC_SLA_AD_ACK_TRAN 0x80
+#define TWSI_SLA_REC_WR_DATA_AF_REC_SLA_AD_ACK_NOT_TRAN 0x88
+#define TWSI_SLA_REC_WR_DATA_AF_REC_GNL_CALL_ACK_TRAN 0x90
+#define TWSI_SLA_REC_WR_DATA_AF_REC_GNL_CALL_ACK_NOT_TRAN 0x98
+#define TWSI_SLA_REC_STOP_OR_REPEATED_STRT_CON 0xA0
+#define TWSI_SLA_REC_AD_PLS_RD_BIT_ACK_TRA 0xA8
+#define TWSI_M_LOST_ARB_DUR_AD_TRA_AD_IS_TRGT_TO_SLA_ACK_TRA_R 0xB0
+#define TWSI_SLA_TRA_RD_DATA_ACK_REC 0xB8
+#define TWSI_SLA_TRA_RD_DATA_ACK_NOT_REC 0xC0
+#define TWSI_SLA_TRA_LAST_RD_DATA_ACK_REC 0xC8
+#define TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC 0xD0
+#define TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_NOT_REC 0xD8
+#define TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC 0xE0
+#define TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_NOT_REC 0xE8
+#define TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0 0xF8
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvTwsiSpech */
/*
* A loadable module that benchmarks the OCF crypto speed from kernel space.
*
- * Copyright (C) 2004-2007 David McCullough <david_mccullough@securecomputing.com>
+ * Copyright (C) 2004-2010 David McCullough <david_mccullough@mcafee.com>
*
* LICENSE TERMS
*
module_exit(ocfbench_exit);
MODULE_LICENSE("BSD");
-MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
MODULE_DESCRIPTION("Benchmark various in-kernel crypto speeds");
/*
* Provide compat routines for older linux kernels and BSD kernels
*
- * Written by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2007 David McCullough <david_mccullough@securecomputing.com>
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2010 David McCullough <david_mccullough@mcafee.com>
*
* LICENSE TERMS
*
#define DMA_32BIT_MASK 0x00000000ffffffffULL
#endif
+#ifndef htole32
#define htole32(x) cpu_to_le32(x)
+#endif
+#ifndef htobe32
#define htobe32(x) cpu_to_be32(x)
+#endif
+#ifndef htole16
#define htole16(x) cpu_to_le16(x)
+#endif
+#ifndef htobe16
#define htobe16(x) cpu_to_be16(x)
+#endif
/* older kernels don't have these */
-#ifndef IRQ_NONE
+#include <asm/irq.h>
+#if !defined(IRQ_NONE) && !defined(IRQ_RETVAL)
#define IRQ_NONE
#define IRQ_HANDLED
+#define IRQ_WAKE_THREAD
+#define IRQ_RETVAL
#define irqreturn_t void
+typedef irqreturn_t (*irq_handler_t)(int irq, void *arg, struct pt_regs *regs);
#endif
#ifndef IRQF_SHARED
#define IRQF_SHARED SA_SHIRQ
#define MAX_ERRNO 4095
#endif
#ifndef IS_ERR_VALUE
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,5)
+#include <linux/err.h>
+#endif
+#ifndef IS_ERR_VALUE
#define IS_ERR_VALUE(x) ((unsigned long)(x) >= (unsigned long)-MAX_ERRNO)
#endif
+#endif
/*
* common debug for all
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
+#include <linux/mm.h>
#include <asm/scatterlist.h>
static inline void sg_set_page(struct scatterlist *sg, struct page *page,
return page_address(sg->page) + sg->offset;
}
+#define sg_init_table(sg, n)
+
+#endif
+
+#ifndef late_initcall
+#define late_initcall(init) module_init(init)
#endif
#endif /* __KERNEL__ */
* zero cost encryption, of course you will need to run it at both ends
* since it does no crypto at all.
*
- * Written by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2006-2007 David McCullough
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
*
* LICENSE TERMS
*
module_exit(null_exit);
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
MODULE_DESCRIPTION("ocfnull - claims a lot but does nothing");
*
* This should be fast and callable from timers/interrupts
*
- * Written by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2006-2007 David McCullough
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
* Copyright (C) 2004-2005 Intel Corporation.
*
* LICENSE TERMS
#error "Please do not enable OCF_RANDOMHARVEST unless you have applied patches"
#endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+#include <linux/sched.h>
+#define kill_proc(p,s,v) send_sig(s,find_task_by_vpid(p),0)
+#endif
+
/*
* a hack to access the debug levels from the crypto driver
*/
/* $OpenBSD$ */
/*
- * OCF/Linux port done by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2006-2007 David McCullough
+ * OCF/Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
* Copyright (C) 2004-2005 Intel Corporation.
* The license and original author are listed below.
*
/*-
- * Linux port done by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2004-2007 David McCullough
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2004-2010 David McCullough
* The license and original author are listed below.
*
* Copyright (c) 2003 Sam Leffler, Errno Consulting
module_exit(safe_exit);
MODULE_LICENSE("BSD");
-MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
MODULE_DESCRIPTION("OCF driver for safenet PCI crypto devices");
/*-
* The linux port of this code done by David McCullough
- * Copyright (C) 2004-2007 David McCullough <david_mccullough@securecomputing.com>
+ * Copyright (C) 2004-2010 David McCullough <david_mccullough@mcafee.com>
* The license and original author are listed below.
*
* Copyright (c) 2003 Sam Leffler, Errno Consulting
*
* This code written by Kim A. B. Phillips <kim.phillips@freescale.com>
* some code copied from files with the following:
- * Copyright (C) 2004-2007 David McCullough <david_mccullough@securecomputing.com
+ * Copyright (C) 2004-2007 David McCullough <david_mccullough@mcafee.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* with the BSD cryptodev, we need to keep this around. Perhaps this can
* be moved back into the linux/uio.h
*
- * Linux port done by David McCullough <david_mccullough@securecomputing.com>
- * Copyright (C) 2006-2007 David McCullough
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
* Copyright (C) 2004-2005 Intel Corporation.
*
* LICENSE TERMS
+++ /dev/null
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -593,3 +593,6 @@ config CRYPTO_LZO
- source "drivers/crypto/Kconfig"
-
- endif # if CRYPTO
-+
-+source "crypto/ocf/Kconfig"
-+
---- a/crypto/Makefile
-+++ b/crypto/Makefile
-@@ -65,6 +65,8 @@ obj-$(CONFIG_CRYPTO_LZO) += lzo.o
-
- obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
-
-+obj-$(CONFIG_OCF_OCF) += ocf/
-+
- #
- # generic algorithms and the async_tx api
- #
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -129,6 +129,9 @@
- * unsigned int value);
- * void add_interrupt_randomness(int irq);
- *
-+ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+ * int random_input_wait(void);
-+ *
- * add_input_randomness() uses the input layer interrupt timing, as well as
- * the event type information from the hardware.
- *
-@@ -140,6 +143,13 @@
- * a better measure, since the timing of the disk interrupts are more
- * unpredictable.
- *
-+ * random_input_words() just provides a raw block of entropy to the input
-+ * pool, such as from a hardware entropy generator.
-+ *
-+ * random_input_wait() suspends the caller until such time as the
-+ * entropy pool falls below the write threshold, and returns a count of how
-+ * much entropy (in bits) is needed to sustain the pool.
-+ *
- * All of these routines try to estimate how many bits of randomness a
- * particular randomness source. They do this by keeping track of the
- * first and second order deltas of the event timings.
-@@ -669,6 +679,61 @@ void add_disk_randomness(struct gendisk
- }
- #endif
-
-+/*
-+ * random_input_words - add bulk entropy to pool
-+ *
-+ * @buf: buffer to add
-+ * @wordcount: number of __u32 words to add
-+ * @ent_count: total amount of entropy (in bits) to credit
-+ *
-+ * this provides bulk input of entropy to the input pool
-+ *
-+ */
-+void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+{
-+ add_entropy_words(&input_pool, buf, wordcount);
-+
-+ credit_entropy_store(&input_pool, ent_count);
-+
-+ DEBUG_ENT("crediting %d bits => %d\n",
-+ ent_count, input_pool.entropy_count);
-+ /*
-+ * Wake up waiting processes if we have enough
-+ * entropy.
-+ */
-+ if (input_pool.entropy_count >= random_read_wakeup_thresh)
-+ wake_up_interruptible(&random_read_wait);
-+}
-+EXPORT_SYMBOL(random_input_words);
-+
-+/*
-+ * random_input_wait - wait until random needs entropy
-+ *
-+ * this function sleeps until the /dev/random subsystem actually
-+ * needs more entropy, and then return the amount of entropy
-+ * that it would be nice to have added to the system.
-+ */
-+int random_input_wait(void)
-+{
-+ int count;
-+
-+ wait_event_interruptible(random_write_wait,
-+ input_pool.entropy_count < random_write_wakeup_thresh);
-+
-+ count = random_write_wakeup_thresh - input_pool.entropy_count;
-+
-+ /* likely we got woken up due to a signal */
-+ if (count <= 0) count = random_read_wakeup_thresh;
-+
-+ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
-+ count,
-+ input_pool.entropy_count, random_write_wakeup_thresh);
-+
-+ return count;
-+}
-+EXPORT_SYMBOL(random_input_wait);
-+
-+
- #define EXTRACT_SIZE 10
-
- /*********************************************************************
---- a/fs/fcntl.c
-+++ b/fs/fcntl.c
-@@ -202,6 +202,7 @@ asmlinkage long sys_dup(unsigned int fil
- ret = dupfd(file, 0, 0);
- return ret;
- }
-+EXPORT_SYMBOL(sys_dup);
-
- #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | FASYNC | O_DIRECT | O_NOATIME)
-
---- a/include/linux/miscdevice.h
-+++ b/include/linux/miscdevice.h
-@@ -12,6 +12,7 @@
- #define APOLLO_MOUSE_MINOR 7
- #define PC110PAD_MINOR 9
- /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
-+#define CRYPTODEV_MINOR 70 /* /dev/crypto */
- #define WATCHDOG_MINOR 130 /* Watchdog timer */
- #define TEMP_MINOR 131 /* Temperature Sensor */
- #define RTC_MINOR 135
---- a/include/linux/random.h
-+++ b/include/linux/random.h
-@@ -8,6 +8,7 @@
- #define _LINUX_RANDOM_H
-
- #include <linux/ioctl.h>
-+#include <linux/types.h> /* for __u32 in user space */
-
- /* ioctl()'s for the random number generator */
-
-@@ -32,6 +33,30 @@
- /* Clear the entropy pool and associated counters. (Superuser only.) */
- #define RNDCLEARPOOL _IO( 'R', 0x06 )
-
-+#ifdef CONFIG_FIPS_RNG
-+
-+/* Size of seed value - equal to AES blocksize */
-+#define AES_BLOCK_SIZE_BYTES 16
-+#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
-+/* Size of AES key */
-+#define KEY_SIZE_BYTES 16
-+
-+/* ioctl() structure used by FIPS 140-2 Tests */
-+struct rand_fips_test {
-+ unsigned char key[KEY_SIZE_BYTES]; /* Input */
-+ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char result[SEED_SIZE_BYTES]; /* Output */
-+};
-+
-+/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
-+#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
-+
-+/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
-+#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
-+
-+#endif /* #ifdef CONFIG_FIPS_RNG */
-+
- struct rand_pool_info {
- int entropy_count;
- int buf_size;
-@@ -48,6 +73,10 @@ extern void add_input_randomness(unsigne
- unsigned int value);
- extern void add_interrupt_randomness(int irq);
-
-+extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
-+extern int random_input_wait(void);
-+#define HAS_RANDOM_INPUT_WAIT 1
-+
- extern void get_random_bytes(void *buf, int nbytes);
- void generate_random_uuid(unsigned char uuid_out[16]);
-
--- /dev/null
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+ * unsigned int value);
+ * void add_interrupt_randomness(int irq);
+ *
++ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ * int random_input_wait(void);
++ *
+ * add_input_randomness() uses the input layer interrupt timing, as well as
+ * the event type information from the hardware.
+ *
+@@ -140,6 +143,13 @@
+ * a better measure, since the timing of the disk interrupts are more
+ * unpredictable.
+ *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+ * All of these routines try to estimate how many bits of randomness a
+ * particular randomness source. They do this by keeping track of the
+ * first and second order deltas of the event timings.
+@@ -669,6 +679,61 @@ void add_disk_randomness(struct gendisk
+ }
+ #endif
+
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++ mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++ credit_entropy_bits(&input_pool, ent_count);
++
++ DEBUG_ENT("crediting %d bits => %d\n",
++ ent_count, input_pool.entropy_count);
++ /*
++ * Wake up waiting processes if we have enough
++ * entropy.
++ */
++ if (input_pool.entropy_count >= random_read_wakeup_thresh)
++ wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++ int count;
++
++ wait_event_interruptible(random_write_wait,
++ input_pool.entropy_count < random_write_wakeup_thresh);
++
++ count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++ /* likely we got woken up due to a signal */
++ if (count <= 0) count = random_read_wakeup_thresh;
++
++ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++ count,
++ input_pool.entropy_count, random_write_wakeup_thresh);
++
++ return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -136,6 +136,7 @@ static int dupfd(struct file *file, unsi
+
+ return fd;
+ }
++EXPORT_SYMBOL(sys_dup);
+
+ asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
+ {
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR 7
+ #define PC110PAD_MINOR 9
+ /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
++#define CRYPTODEV_MINOR 70
+ #define WATCHDOG_MINOR 130 /* Watchdog timer */
+ #define TEMP_MINOR 131 /* Temperature Sensor */
+ #define RTC_MINOR 135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -8,6 +8,7 @@
+ #define _LINUX_RANDOM_H
+
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+
+ /* ioctl()'s for the random number generator */
+
+@@ -32,6 +33,30 @@
+ /* Clear the entropy pool and associated counters. (Superuser only.) */
+ #define RNDCLEARPOOL _IO( 'R', 0x06 )
+
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES 16
++#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES 16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++ unsigned char key[KEY_SIZE_BYTES]; /* Input */
++ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
++ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
++ unsigned char result[SEED_SIZE_BYTES]; /* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ int entropy_count;
+ int buf_size;
+@@ -48,6 +73,10 @@ extern void add_input_randomness(unsigne
+ unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -377,6 +377,7 @@ struct task_struct *find_task_by_pid_typ
+ {
+ return pid_task(find_pid_ns(nr, ns), type);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+
+ EXPORT_SYMBOL(find_task_by_pid_type_ns);
+
+++ /dev/null
---- a/crypto/ocf/cryptosoft.c
-+++ b/crypto/ocf/cryptosoft.c
-@@ -47,7 +47,7 @@
- #include <linux/mm.h>
- #include <linux/skbuff.h>
- #include <linux/random.h>
--#include <asm/scatterlist.h>
-+#include <linux/scatterlist.h>
-
- #include <cryptodev.h>
- #include <uio.h>
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
-@@ -778,6 +778,8 @@ config CRYPTO_ANSI_CPRNG
- for cryptographic modules. Uses the Algorithm specified in
- ANSI X9.31 A.2.4
-
-+source "crypto/ocf/Kconfig"
-+
+@@ -781,3 +781,6 @@ config CRYPTO_ANSI_CPRNG
source "drivers/crypto/Kconfig"
endif # if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
--- a/crypto/Makefile
+++ b/crypto/Makefile
-@@ -85,6 +85,11 @@ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_
+@@ -84,6 +84,8 @@ obj-$(CONFIG_CRYPTO_RNG2) += krng.o
+ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
- #
-+# OCF
-+#
+obj-$(CONFIG_OCF_OCF) += ocf/
+
-+#
+ #
# generic algorithms and the async_tx api
#
- obj-$(CONFIG_XOR_BLOCKS) += xor.o
+++ /dev/null
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -129,6 +129,9 @@
- * unsigned int value);
- * void add_interrupt_randomness(int irq);
- *
-+ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+ * int random_input_wait(void);
-+ *
- * add_input_randomness() uses the input layer interrupt timing, as well as
- * the event type information from the hardware.
- *
-@@ -140,6 +143,13 @@
- * a better measure, since the timing of the disk interrupts are more
- * unpredictable.
- *
-+ * random_input_words() just provides a raw block of entropy to the input
-+ * pool, such as from a hardware entropy generator.
-+ *
-+ * random_input_wait() suspends the caller until such time as the
-+ * entropy pool falls below the write threshold, and returns a count of how
-+ * much entropy (in bits) is needed to sustain the pool.
-+ *
- * All of these routines try to estimate how many bits of randomness a
- * particular randomness source. They do this by keeping track of the
- * first and second order deltas of the event timings.
-@@ -712,6 +722,61 @@ void add_disk_randomness(struct gendisk
- }
- #endif
-
-+/*
-+ * random_input_words - add bulk entropy to pool
-+ *
-+ * @buf: buffer to add
-+ * @wordcount: number of __u32 words to add
-+ * @ent_count: total amount of entropy (in bits) to credit
-+ *
-+ * this provides bulk input of entropy to the input pool
-+ *
-+ */
-+void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+{
-+ mix_pool_bytes(&input_pool, buf, wordcount*4);
-+
-+ credit_entropy_bits(&input_pool, ent_count);
-+
-+ DEBUG_ENT("crediting %d bits => %d\n",
-+ ent_count, input_pool.entropy_count);
-+ /*
-+ * Wake up waiting processes if we have enough
-+ * entropy.
-+ */
-+ if (input_pool.entropy_count >= random_read_wakeup_thresh)
-+ wake_up_interruptible(&random_read_wait);
-+}
-+EXPORT_SYMBOL(random_input_words);
-+
-+/*
-+ * random_input_wait - wait until random needs entropy
-+ *
-+ * this function sleeps until the /dev/random subsystem actually
-+ * needs more entropy, and then return the amount of entropy
-+ * that it would be nice to have added to the system.
-+ */
-+int random_input_wait(void)
-+{
-+ int count;
-+
-+ wait_event_interruptible(random_write_wait,
-+ input_pool.entropy_count < random_write_wakeup_thresh);
-+
-+ count = random_write_wakeup_thresh - input_pool.entropy_count;
-+
-+ /* likely we got woken up due to a signal */
-+ if (count <= 0) count = random_read_wakeup_thresh;
-+
-+ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
-+ count,
-+ input_pool.entropy_count, random_write_wakeup_thresh);
-+
-+ return count;
-+}
-+EXPORT_SYMBOL(random_input_wait);
-+
-+
- #define EXTRACT_SIZE 10
-
- /*********************************************************************
---- a/fs/fcntl.c
-+++ b/fs/fcntl.c
-@@ -142,6 +142,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
- }
- return ret;
- }
-+EXPORT_SYMBOL(sys_dup);
-
- #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
-
---- a/include/linux/miscdevice.h
-+++ b/include/linux/miscdevice.h
-@@ -12,6 +12,7 @@
- #define APOLLO_MOUSE_MINOR 7
- #define PC110PAD_MINOR 9
- /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
-+#define CRYPTODEV_MINOR 70 /* /dev/crypto */
- #define WATCHDOG_MINOR 130 /* Watchdog timer */
- #define TEMP_MINOR 131 /* Temperature Sensor */
- #define RTC_MINOR 135
---- a/include/linux/random.h
-+++ b/include/linux/random.h
-@@ -34,6 +34,30 @@
- /* Clear the entropy pool and associated counters. (Superuser only.) */
- #define RNDCLEARPOOL _IO( 'R', 0x06 )
-
-+#ifdef CONFIG_FIPS_RNG
-+
-+/* Size of seed value - equal to AES blocksize */
-+#define AES_BLOCK_SIZE_BYTES 16
-+#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
-+/* Size of AES key */
-+#define KEY_SIZE_BYTES 16
-+
-+/* ioctl() structure used by FIPS 140-2 Tests */
-+struct rand_fips_test {
-+ unsigned char key[KEY_SIZE_BYTES]; /* Input */
-+ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char result[SEED_SIZE_BYTES]; /* Output */
-+};
-+
-+/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
-+#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
-+
-+/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
-+#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
-+
-+#endif /* #ifdef CONFIG_FIPS_RNG */
-+
- struct rand_pool_info {
- int entropy_count;
- int buf_size;
-@@ -50,6 +74,10 @@ extern void add_input_randomness(unsigne
- unsigned int value);
- extern void add_interrupt_randomness(int irq);
-
-+extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
-+extern int random_input_wait(void);
-+#define HAS_RANDOM_INPUT_WAIT 1
-+
- extern void get_random_bytes(void *buf, int nbytes);
- void generate_random_uuid(unsigned char uuid_out[16]);
-
--- /dev/null
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+ * unsigned int value);
+ * void add_interrupt_randomness(int irq);
+ *
++ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ * int random_input_wait(void);
++ *
+ * add_input_randomness() uses the input layer interrupt timing, as well as
+ * the event type information from the hardware.
+ *
+@@ -140,6 +143,13 @@
+ * a better measure, since the timing of the disk interrupts are more
+ * unpredictable.
+ *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+ * All of these routines try to estimate how many bits of randomness a
+ * particular randomness source. They do this by keeping track of the
+ * first and second order deltas of the event timings.
+@@ -712,6 +722,61 @@ void add_disk_randomness(struct gendisk
+ }
+ #endif
+
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++ mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++ credit_entropy_bits(&input_pool, ent_count);
++
++ DEBUG_ENT("crediting %d bits => %d\n",
++ ent_count, input_pool.entropy_count);
++ /*
++ * Wake up waiting processes if we have enough
++ * entropy.
++ */
++ if (input_pool.entropy_count >= random_read_wakeup_thresh)
++ wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++ int count;
++
++ wait_event_interruptible(random_write_wait,
++ input_pool.entropy_count < random_write_wakeup_thresh);
++
++ count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++ /* likely we got woken up due to a signal */
++ if (count <= 0) count = random_read_wakeup_thresh;
++
++ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++ count,
++ input_pool.entropy_count, random_write_wakeup_thresh);
++
++ return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -142,6 +142,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
+ }
+ return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR 7
+ #define PC110PAD_MINOR 9
+ /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
++#define CRYPTODEV_MINOR 70 /* /dev/crypto */
+ #define WATCHDOG_MINOR 130 /* Watchdog timer */
+ #define TEMP_MINOR 131 /* Temperature Sensor */
+ #define RTC_MINOR 135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -9,6 +9,7 @@
+
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters. (Superuser only.) */
+ #define RNDCLEARPOOL _IO( 'R', 0x06 )
+
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES 16
++#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES 16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++ unsigned char key[KEY_SIZE_BYTES]; /* Input */
++ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
++ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
++ unsigned char result[SEED_SIZE_BYTES]; /* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ int entropy_count;
+ int buf_size;
+@@ -50,6 +75,10 @@ extern void add_input_randomness(unsigne
+ unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -383,6 +383,7 @@ struct task_struct *find_task_by_pid_typ
+ {
+ return pid_task(find_pid_ns(nr, ns), type);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+
+ EXPORT_SYMBOL(find_task_by_pid_type_ns);
+
+++ /dev/null
---- a/crypto/ocf/cryptosoft.c
-+++ b/crypto/ocf/cryptosoft.c
-@@ -47,7 +47,7 @@
- #include <linux/mm.h>
- #include <linux/skbuff.h>
- #include <linux/random.h>
--#include <asm/scatterlist.h>
-+#include <linux/scatterlist.h>
-
- #include <cryptodev.h>
- #include <uio.h>
+++ /dev/null
---- a/crypto/ocf/random.c
-+++ b/crypto/ocf/random.c
-@@ -49,6 +49,7 @@
- #include <linux/unistd.h>
- #include <linux/poll.h>
- #include <linux/random.h>
-+#include <linux/kthread.h>
- #include <cryptodev.h>
-
- #ifdef CONFIG_OCF_FIPS
-@@ -81,7 +82,7 @@ struct random_op {
-
- static int random_proc(void *arg);
-
--static pid_t randomproc = (pid_t) -1;
-+static struct task_struct *random_task;
- static spinlock_t random_lock;
-
- /*
-@@ -141,13 +142,18 @@ crypto_rregister(
- spin_lock_irqsave(&random_lock, flags);
- list_add_tail(&rops->random_list, &random_ops);
- if (!started) {
-- randomproc = kernel_thread(random_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (randomproc < 0) {
-- ret = randomproc;
-+ struct task_struct *t;
-+
-+ t = kthread_create(random_proc, NULL, "ocf-random");
-+ if (IS_ERR(t)) {
-+ ret = PTR_ERR(t);
- printk("crypto: crypto_rregister cannot start random thread; "
- "error %d", ret);
-- } else
-+ } else {
-+ random_task = t;
-+ wake_up_process(t);
- started = 1;
-+ }
- }
- spin_unlock_irqrestore(&random_lock, flags);
-
-@@ -172,7 +178,7 @@ crypto_runregister_all(u_int32_t driveri
-
- spin_lock_irqsave(&random_lock, flags);
- if (list_empty(&random_ops) && started)
-- kill_proc(randomproc, SIGKILL, 1);
-+ send_sig(SIGKILL, random_task, 1);
- spin_unlock_irqrestore(&random_lock, flags);
- return(0);
- }
-@@ -308,7 +314,7 @@ random_proc(void *arg)
-
- bad_alloc:
- spin_lock_irq(&random_lock);
-- randomproc = (pid_t) -1;
-+ random_task = NULL;
- started = 0;
- spin_unlock_irq(&random_lock);
-
---- a/crypto/ocf/crypto.c
-+++ b/crypto/ocf/crypto.c
-@@ -74,6 +74,7 @@ __FBSDID("$FreeBSD: src/sys/opencrypto/c
- #include <linux/sched.h>
- #include <linux/spinlock.h>
- #include <linux/version.h>
-+#include <linux/kthread.h>
- #include <cryptodev.h>
-
- /*
-@@ -255,10 +256,10 @@ module_param(crypto_devallowsoft, int, 0
- MODULE_PARM_DESC(crypto_devallowsoft,
- "Enable/disable use of software crypto support");
-
--static pid_t cryptoproc = (pid_t) -1;
-+static struct task_struct *crypto_task;
- static struct completion cryptoproc_exited;
- static DECLARE_WAIT_QUEUE_HEAD(cryptoproc_wait);
--static pid_t cryptoretproc = (pid_t) -1;
-+static struct task_struct *cryptoret_task;
- static struct completion cryptoretproc_exited;
- static DECLARE_WAIT_QUEUE_HEAD(cryptoretproc_wait);
-
-@@ -1401,7 +1402,7 @@ crypto_proc(void *arg)
- wait_event_interruptible(cryptoproc_wait,
- !(list_empty(&crp_q) || crypto_all_qblocked) ||
- !(list_empty(&crp_kq) || crypto_all_kqblocked) ||
-- cryptoproc == (pid_t) -1);
-+ crypto_task == NULL);
- crp_sleep = 0;
- if (signal_pending (current)) {
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-@@ -1414,7 +1415,7 @@ crypto_proc(void *arg)
- }
- CRYPTO_Q_LOCK();
- dprintk("%s - awake\n", __FUNCTION__);
-- if (cryptoproc == (pid_t) -1)
-+ if (crypto_task == NULL)
- break;
- cryptostats.cs_intrs++;
- }
-@@ -1470,7 +1471,7 @@ crypto_ret_proc(void *arg)
- dprintk("%s - sleeping\n", __FUNCTION__);
- CRYPTO_RETQ_UNLOCK();
- wait_event_interruptible(cryptoretproc_wait,
-- cryptoretproc == (pid_t) -1 ||
-+ cryptoret_task == NULL ||
- !list_empty(&crp_ret_q) ||
- !list_empty(&crp_ret_kq));
- if (signal_pending (current)) {
-@@ -1484,7 +1485,7 @@ crypto_ret_proc(void *arg)
- }
- CRYPTO_RETQ_LOCK();
- dprintk("%s - awake\n", __FUNCTION__);
-- if (cryptoretproc == (pid_t) -1) {
-+ if (cryptoret_task == NULL) {
- dprintk("%s - EXITING!\n", __FUNCTION__);
- break;
- }
-@@ -1597,6 +1598,7 @@ DB_SHOW_COMMAND(kcrypto, db_show_kcrypto
- static int
- crypto_init(void)
- {
-+ struct task_struct *t;
- int error;
-
- dprintk("%s(0x%x)\n", __FUNCTION__, (int) crypto_init);
-@@ -1643,23 +1645,27 @@ crypto_init(void)
- init_completion(&cryptoproc_exited);
- init_completion(&cryptoretproc_exited);
-
-- cryptoproc = 0; /* to avoid race condition where proc runs first */
-- cryptoproc = kernel_thread(crypto_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (cryptoproc < 0) {
-- error = cryptoproc;
-+ crypto_task = NULL; /* to avoid race condition where proc runs first */
-+ t = kthread_create(crypto_proc, NULL, "ocf-crypto");
-+ if (IS_ERR(t)) {
-+ error = PTR_ERR(t);
- printk("crypto: crypto_init cannot start crypto thread; error %d",
- error);
- goto bad;
- }
-+ wake_up_process(t);
-+ crypto_task = t;
-
-- cryptoretproc = 0; /* to avoid race condition where proc runs first */
-- cryptoretproc = kernel_thread(crypto_ret_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (cryptoretproc < 0) {
-- error = cryptoretproc;
-+ cryptoret_task = NULL; /* to avoid race condition where proc runs first */
-+ t = kthread_create(crypto_ret_proc, NULL, "ocf-cryptoret");
-+ if (IS_ERR(t)) {
-+ error = PTR_ERR(t);
- printk("crypto: crypto_init cannot start cryptoret thread; error %d",
- error);
- goto bad;
- }
-+ wake_up_process(t);
-+ cryptoret_task = t;
-
- return 0;
- bad:
-@@ -1671,7 +1677,7 @@ bad:
- static void
- crypto_exit(void)
- {
-- pid_t p;
-+ struct task_struct *t;
- unsigned long d_flags;
-
- dprintk("%s()\n", __FUNCTION__);
-@@ -1681,18 +1687,18 @@ crypto_exit(void)
- */
-
- CRYPTO_DRIVER_LOCK();
-- p = cryptoproc;
-- cryptoproc = (pid_t) -1;
-- kill_proc(p, SIGTERM, 1);
-+ t = crypto_task;
-+ crypto_task = NULL;
-+ send_sig(SIGTERM, t, 1);
- wake_up_interruptible(&cryptoproc_wait);
- CRYPTO_DRIVER_UNLOCK();
-
- wait_for_completion(&cryptoproc_exited);
-
- CRYPTO_DRIVER_LOCK();
-- p = cryptoretproc;
-- cryptoretproc = (pid_t) -1;
-- kill_proc(p, SIGTERM, 1);
-+ t = cryptoret_task;
-+ cryptoret_task = NULL;
-+ send_sig(SIGTERM, t, 1);
- wake_up_interruptible(&cryptoretproc_wait);
- CRYPTO_DRIVER_UNLOCK();
-
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
-@@ -788,6 +788,8 @@ config CRYPTO_ANSI_CPRNG
- for cryptographic modules. Uses the Algorithm specified in
- ANSI X9.31 A.2.4
-
-+source "crypto/ocf/Kconfig"
-+
+@@ -791,3 +791,6 @@ config CRYPTO_ANSI_CPRNG
source "drivers/crypto/Kconfig"
endif # if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
--- a/crypto/Makefile
+++ b/crypto/Makefile
-@@ -85,6 +85,11 @@ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_
+@@ -84,6 +84,8 @@ obj-$(CONFIG_CRYPTO_RNG2) += krng.o
+ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
- #
-+# OCF
-+#
+obj-$(CONFIG_OCF_OCF) += ocf/
+
-+#
+ #
# generic algorithms and the async_tx api
#
- obj-$(CONFIG_XOR_BLOCKS) += xor.o
+++ /dev/null
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -129,6 +129,9 @@
- * unsigned int value);
- * void add_interrupt_randomness(int irq);
- *
-+ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+ * int random_input_wait(void);
-+ *
- * add_input_randomness() uses the input layer interrupt timing, as well as
- * the event type information from the hardware.
- *
-@@ -140,6 +143,13 @@
- * a better measure, since the timing of the disk interrupts are more
- * unpredictable.
- *
-+ * random_input_words() just provides a raw block of entropy to the input
-+ * pool, such as from a hardware entropy generator.
-+ *
-+ * random_input_wait() suspends the caller until such time as the
-+ * entropy pool falls below the write threshold, and returns a count of how
-+ * much entropy (in bits) is needed to sustain the pool.
-+ *
- * All of these routines try to estimate how many bits of randomness a
- * particular randomness source. They do this by keeping track of the
- * first and second order deltas of the event timings.
-@@ -712,6 +722,61 @@ void add_disk_randomness(struct gendisk
- }
- #endif
-
-+/*
-+ * random_input_words - add bulk entropy to pool
-+ *
-+ * @buf: buffer to add
-+ * @wordcount: number of __u32 words to add
-+ * @ent_count: total amount of entropy (in bits) to credit
-+ *
-+ * this provides bulk input of entropy to the input pool
-+ *
-+ */
-+void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+{
-+ mix_pool_bytes(&input_pool, buf, wordcount*4);
-+
-+ credit_entropy_bits(&input_pool, ent_count);
-+
-+ DEBUG_ENT("crediting %d bits => %d\n",
-+ ent_count, input_pool.entropy_count);
-+ /*
-+ * Wake up waiting processes if we have enough
-+ * entropy.
-+ */
-+ if (input_pool.entropy_count >= random_read_wakeup_thresh)
-+ wake_up_interruptible(&random_read_wait);
-+}
-+EXPORT_SYMBOL(random_input_words);
-+
-+/*
-+ * random_input_wait - wait until random needs entropy
-+ *
-+ * this function sleeps until the /dev/random subsystem actually
-+ * needs more entropy, and then return the amount of entropy
-+ * that it would be nice to have added to the system.
-+ */
-+int random_input_wait(void)
-+{
-+ int count;
-+
-+ wait_event_interruptible(random_write_wait,
-+ input_pool.entropy_count < random_write_wakeup_thresh);
-+
-+ count = random_write_wakeup_thresh - input_pool.entropy_count;
-+
-+ /* likely we got woken up due to a signal */
-+ if (count <= 0) count = random_read_wakeup_thresh;
-+
-+ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
-+ count,
-+ input_pool.entropy_count, random_write_wakeup_thresh);
-+
-+ return count;
-+}
-+EXPORT_SYMBOL(random_input_wait);
-+
-+
- #define EXTRACT_SIZE 10
-
- /*********************************************************************
---- a/fs/fcntl.c
-+++ b/fs/fcntl.c
-@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
- }
- return ret;
- }
-+EXPORT_SYMBOL(sys_dup);
-
- #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
-
---- a/include/linux/miscdevice.h
-+++ b/include/linux/miscdevice.h
-@@ -12,6 +12,7 @@
- #define APOLLO_MOUSE_MINOR 7
- #define PC110PAD_MINOR 9
- /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
-+#define CRYPTODEV_MINOR 70 /* /dev/crypto */
- #define WATCHDOG_MINOR 130 /* Watchdog timer */
- #define TEMP_MINOR 131 /* Temperature Sensor */
- #define RTC_MINOR 135
---- a/include/linux/random.h
-+++ b/include/linux/random.h
-@@ -34,6 +34,30 @@
- /* Clear the entropy pool and associated counters. (Superuser only.) */
- #define RNDCLEARPOOL _IO( 'R', 0x06 )
-
-+#ifdef CONFIG_FIPS_RNG
-+
-+/* Size of seed value - equal to AES blocksize */
-+#define AES_BLOCK_SIZE_BYTES 16
-+#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
-+/* Size of AES key */
-+#define KEY_SIZE_BYTES 16
-+
-+/* ioctl() structure used by FIPS 140-2 Tests */
-+struct rand_fips_test {
-+ unsigned char key[KEY_SIZE_BYTES]; /* Input */
-+ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char result[SEED_SIZE_BYTES]; /* Output */
-+};
-+
-+/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
-+#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
-+
-+/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
-+#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
-+
-+#endif /* #ifdef CONFIG_FIPS_RNG */
-+
- struct rand_pool_info {
- int entropy_count;
- int buf_size;
-@@ -50,6 +74,10 @@ extern void add_input_randomness(unsigne
- unsigned int value);
- extern void add_interrupt_randomness(int irq);
-
-+extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
-+extern int random_input_wait(void);
-+#define HAS_RANDOM_INPUT_WAIT 1
-+
- extern void get_random_bytes(void *buf, int nbytes);
- void generate_random_uuid(unsigned char uuid_out[16]);
-
--- /dev/null
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+ * unsigned int value);
+ * void add_interrupt_randomness(int irq);
+ *
++ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ * int random_input_wait(void);
++ *
+ * add_input_randomness() uses the input layer interrupt timing, as well as
+ * the event type information from the hardware.
+ *
+@@ -140,6 +143,13 @@
+ * a better measure, since the timing of the disk interrupts are more
+ * unpredictable.
+ *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+ * All of these routines try to estimate how many bits of randomness a
+ * particular randomness source. They do this by keeping track of the
+ * first and second order deltas of the event timings.
+@@ -712,6 +722,61 @@ void add_disk_randomness(struct gendisk
+ }
+ #endif
+
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++ mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++ credit_entropy_bits(&input_pool, ent_count);
++
++ DEBUG_ENT("crediting %d bits => %d\n",
++ ent_count, input_pool.entropy_count);
++ /*
++ * Wake up waiting processes if we have enough
++ * entropy.
++ */
++ if (input_pool.entropy_count >= random_read_wakeup_thresh)
++ wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++ int count;
++
++ wait_event_interruptible(random_write_wait,
++ input_pool.entropy_count < random_write_wakeup_thresh);
++
++ count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++ /* likely we got woken up due to a signal */
++ if (count <= 0) count = random_read_wakeup_thresh;
++
++ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++ count,
++ input_pool.entropy_count, random_write_wakeup_thresh);
++
++ return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
+ }
+ return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR 7
+ #define PC110PAD_MINOR 9
+ /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
++#define CRYPTODEV_MINOR 70 /* /dev/crypto */
+ #define WATCHDOG_MINOR 130 /* Watchdog timer */
+ #define TEMP_MINOR 131 /* Temperature Sensor */
+ #define RTC_MINOR 135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -9,6 +9,7 @@
+
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters. (Superuser only.) */
+ #define RNDCLEARPOOL _IO( 'R', 0x06 )
+
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES 16
++#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES 16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++ unsigned char key[KEY_SIZE_BYTES]; /* Input */
++ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
++ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
++ unsigned char result[SEED_SIZE_BYTES]; /* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ int entropy_count;
+ int buf_size;
+@@ -50,6 +75,10 @@ extern void add_input_randomness(unsigne
+ unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -387,6 +387,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
+++ /dev/null
---- a/crypto/ocf/cryptosoft.c
-+++ b/crypto/ocf/cryptosoft.c
-@@ -47,7 +47,7 @@
- #include <linux/mm.h>
- #include <linux/skbuff.h>
- #include <linux/random.h>
--#include <asm/scatterlist.h>
-+#include <linux/scatterlist.h>
-
- #include <cryptodev.h>
- #include <uio.h>
+++ /dev/null
---- a/crypto/ocf/random.c
-+++ b/crypto/ocf/random.c
-@@ -49,6 +49,7 @@
- #include <linux/unistd.h>
- #include <linux/poll.h>
- #include <linux/random.h>
-+#include <linux/kthread.h>
- #include <cryptodev.h>
-
- #ifdef CONFIG_OCF_FIPS
-@@ -81,7 +82,7 @@ struct random_op {
-
- static int random_proc(void *arg);
-
--static pid_t randomproc = (pid_t) -1;
-+static struct task_struct *random_task;
- static spinlock_t random_lock;
-
- /*
-@@ -141,13 +142,18 @@ crypto_rregister(
- spin_lock_irqsave(&random_lock, flags);
- list_add_tail(&rops->random_list, &random_ops);
- if (!started) {
-- randomproc = kernel_thread(random_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (randomproc < 0) {
-- ret = randomproc;
-+ struct task_struct *t;
-+
-+ t = kthread_create(random_proc, NULL, "ocf-random");
-+ if (IS_ERR(t)) {
-+ ret = PTR_ERR(t);
- printk("crypto: crypto_rregister cannot start random thread; "
- "error %d", ret);
-- } else
-+ } else {
-+ random_task = t;
-+ wake_up_process(t);
- started = 1;
-+ }
- }
- spin_unlock_irqrestore(&random_lock, flags);
-
-@@ -172,7 +178,7 @@ crypto_runregister_all(u_int32_t driveri
-
- spin_lock_irqsave(&random_lock, flags);
- if (list_empty(&random_ops) && started)
-- kill_proc(randomproc, SIGKILL, 1);
-+ send_sig(SIGKILL, random_task, 1);
- spin_unlock_irqrestore(&random_lock, flags);
- return(0);
- }
-@@ -308,7 +314,7 @@ random_proc(void *arg)
-
- bad_alloc:
- spin_lock_irq(&random_lock);
-- randomproc = (pid_t) -1;
-+ random_task = NULL;
- started = 0;
- spin_unlock_irq(&random_lock);
-
---- a/crypto/ocf/crypto.c
-+++ b/crypto/ocf/crypto.c
-@@ -74,6 +74,7 @@ __FBSDID("$FreeBSD: src/sys/opencrypto/c
- #include <linux/sched.h>
- #include <linux/spinlock.h>
- #include <linux/version.h>
-+#include <linux/kthread.h>
- #include <cryptodev.h>
-
- /*
-@@ -255,10 +256,10 @@ module_param(crypto_devallowsoft, int, 0
- MODULE_PARM_DESC(crypto_devallowsoft,
- "Enable/disable use of software crypto support");
-
--static pid_t cryptoproc = (pid_t) -1;
-+static struct task_struct *crypto_task;
- static struct completion cryptoproc_exited;
- static DECLARE_WAIT_QUEUE_HEAD(cryptoproc_wait);
--static pid_t cryptoretproc = (pid_t) -1;
-+static struct task_struct *cryptoret_task;
- static struct completion cryptoretproc_exited;
- static DECLARE_WAIT_QUEUE_HEAD(cryptoretproc_wait);
-
-@@ -1401,7 +1402,7 @@ crypto_proc(void *arg)
- wait_event_interruptible(cryptoproc_wait,
- !(list_empty(&crp_q) || crypto_all_qblocked) ||
- !(list_empty(&crp_kq) || crypto_all_kqblocked) ||
-- cryptoproc == (pid_t) -1);
-+ crypto_task == NULL);
- crp_sleep = 0;
- if (signal_pending (current)) {
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-@@ -1414,7 +1415,7 @@ crypto_proc(void *arg)
- }
- CRYPTO_Q_LOCK();
- dprintk("%s - awake\n", __FUNCTION__);
-- if (cryptoproc == (pid_t) -1)
-+ if (crypto_task == NULL)
- break;
- cryptostats.cs_intrs++;
- }
-@@ -1470,7 +1471,7 @@ crypto_ret_proc(void *arg)
- dprintk("%s - sleeping\n", __FUNCTION__);
- CRYPTO_RETQ_UNLOCK();
- wait_event_interruptible(cryptoretproc_wait,
-- cryptoretproc == (pid_t) -1 ||
-+ cryptoret_task == NULL ||
- !list_empty(&crp_ret_q) ||
- !list_empty(&crp_ret_kq));
- if (signal_pending (current)) {
-@@ -1484,7 +1485,7 @@ crypto_ret_proc(void *arg)
- }
- CRYPTO_RETQ_LOCK();
- dprintk("%s - awake\n", __FUNCTION__);
-- if (cryptoretproc == (pid_t) -1) {
-+ if (cryptoret_task == NULL) {
- dprintk("%s - EXITING!\n", __FUNCTION__);
- break;
- }
-@@ -1597,6 +1598,7 @@ DB_SHOW_COMMAND(kcrypto, db_show_kcrypto
- static int
- crypto_init(void)
- {
-+ struct task_struct *t;
- int error;
-
- dprintk("%s(0x%x)\n", __FUNCTION__, (int) crypto_init);
-@@ -1643,23 +1645,27 @@ crypto_init(void)
- init_completion(&cryptoproc_exited);
- init_completion(&cryptoretproc_exited);
-
-- cryptoproc = 0; /* to avoid race condition where proc runs first */
-- cryptoproc = kernel_thread(crypto_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (cryptoproc < 0) {
-- error = cryptoproc;
-+ crypto_task = NULL; /* to avoid race condition where proc runs first */
-+ t = kthread_create(crypto_proc, NULL, "ocf-crypto");
-+ if (IS_ERR(t)) {
-+ error = PTR_ERR(t);
- printk("crypto: crypto_init cannot start crypto thread; error %d",
- error);
- goto bad;
- }
-+ wake_up_process(t);
-+ crypto_task = t;
-
-- cryptoretproc = 0; /* to avoid race condition where proc runs first */
-- cryptoretproc = kernel_thread(crypto_ret_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (cryptoretproc < 0) {
-- error = cryptoretproc;
-+ cryptoret_task = NULL; /* to avoid race condition where proc runs first */
-+ t = kthread_create(crypto_ret_proc, NULL, "ocf-cryptoret");
-+ if (IS_ERR(t)) {
-+ error = PTR_ERR(t);
- printk("crypto: crypto_init cannot start cryptoret thread; error %d",
- error);
- goto bad;
- }
-+ wake_up_process(t);
-+ cryptoret_task = t;
-
- return 0;
- bad:
-@@ -1671,7 +1677,7 @@ bad:
- static void
- crypto_exit(void)
- {
-- pid_t p;
-+ struct task_struct *t;
- unsigned long d_flags;
-
- dprintk("%s()\n", __FUNCTION__);
-@@ -1681,18 +1687,18 @@ crypto_exit(void)
- */
-
- CRYPTO_DRIVER_LOCK();
-- p = cryptoproc;
-- cryptoproc = (pid_t) -1;
-- kill_proc(p, SIGTERM, 1);
-+ t = crypto_task;
-+ crypto_task = NULL;
-+ send_sig(SIGTERM, t, 1);
- wake_up_interruptible(&cryptoproc_wait);
- CRYPTO_DRIVER_UNLOCK();
-
- wait_for_completion(&cryptoproc_exited);
-
- CRYPTO_DRIVER_LOCK();
-- p = cryptoretproc;
-- cryptoretproc = (pid_t) -1;
-- kill_proc(p, SIGTERM, 1);
-+ t = cryptoret_task;
-+ cryptoret_task = NULL;
-+ send_sig(SIGTERM, t, 1);
- wake_up_interruptible(&cryptoretproc_wait);
- CRYPTO_DRIVER_UNLOCK();
-
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
-@@ -814,6 +814,8 @@ config CRYPTO_ANSI_CPRNG
- ANSI X9.31 A.2.4. Not this option must be enabled if CRYPTO_FIPS
- is selected
-
-+source "crypto/ocf/Kconfig"
-+
+@@ -817,3 +817,6 @@ config CRYPTO_ANSI_CPRNG
source "drivers/crypto/Kconfig"
endif # if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
--- a/crypto/Makefile
+++ b/crypto/Makefile
-@@ -86,6 +86,11 @@ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+@@ -85,6 +85,8 @@ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_
+ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
obj-$(CONFIG_CRYPTO_GHASH) += ghash-generic.o
- #
-+# OCF
-+#
+obj-$(CONFIG_OCF_OCF) += ocf/
+
-+#
+ #
# generic algorithms and the async_tx api
#
- obj-$(CONFIG_XOR_BLOCKS) += xor.o
+++ /dev/null
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -129,6 +129,9 @@
- * unsigned int value);
- * void add_interrupt_randomness(int irq);
- *
-+ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+ * int random_input_wait(void);
-+ *
- * add_input_randomness() uses the input layer interrupt timing, as well as
- * the event type information from the hardware.
- *
-@@ -140,6 +143,13 @@
- * a better measure, since the timing of the disk interrupts are more
- * unpredictable.
- *
-+ * random_input_words() just provides a raw block of entropy to the input
-+ * pool, such as from a hardware entropy generator.
-+ *
-+ * random_input_wait() suspends the caller until such time as the
-+ * entropy pool falls below the write threshold, and returns a count of how
-+ * much entropy (in bits) is needed to sustain the pool.
-+ *
- * All of these routines try to estimate how many bits of randomness a
- * particular randomness source. They do this by keeping track of the
- * first and second order deltas of the event timings.
-@@ -714,6 +724,61 @@ void add_disk_randomness(struct gendisk
- }
- #endif
-
-+/*
-+ * random_input_words - add bulk entropy to pool
-+ *
-+ * @buf: buffer to add
-+ * @wordcount: number of __u32 words to add
-+ * @ent_count: total amount of entropy (in bits) to credit
-+ *
-+ * this provides bulk input of entropy to the input pool
-+ *
-+ */
-+void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+{
-+ mix_pool_bytes(&input_pool, buf, wordcount*4);
-+
-+ credit_entropy_bits(&input_pool, ent_count);
-+
-+ DEBUG_ENT("crediting %d bits => %d\n",
-+ ent_count, input_pool.entropy_count);
-+ /*
-+ * Wake up waiting processes if we have enough
-+ * entropy.
-+ */
-+ if (input_pool.entropy_count >= random_read_wakeup_thresh)
-+ wake_up_interruptible(&random_read_wait);
-+}
-+EXPORT_SYMBOL(random_input_words);
-+
-+/*
-+ * random_input_wait - wait until random needs entropy
-+ *
-+ * this function sleeps until the /dev/random subsystem actually
-+ * needs more entropy, and then return the amount of entropy
-+ * that it would be nice to have added to the system.
-+ */
-+int random_input_wait(void)
-+{
-+ int count;
-+
-+ wait_event_interruptible(random_write_wait,
-+ input_pool.entropy_count < random_write_wakeup_thresh);
-+
-+ count = random_write_wakeup_thresh - input_pool.entropy_count;
-+
-+ /* likely we got woken up due to a signal */
-+ if (count <= 0) count = random_read_wakeup_thresh;
-+
-+ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
-+ count,
-+ input_pool.entropy_count, random_write_wakeup_thresh);
-+
-+ return count;
-+}
-+EXPORT_SYMBOL(random_input_wait);
-+
-+
- #define EXTRACT_SIZE 10
-
- /*********************************************************************
---- a/fs/fcntl.c
-+++ b/fs/fcntl.c
-@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
- }
- return ret;
- }
-+EXPORT_SYMBOL(sys_dup);
-
- #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
-
---- a/include/linux/miscdevice.h
-+++ b/include/linux/miscdevice.h
-@@ -12,6 +12,7 @@
- #define APOLLO_MOUSE_MINOR 7
- #define PC110PAD_MINOR 9
- /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
-+#define CRYPTODEV_MINOR 70 /* /dev/crypto */
- #define WATCHDOG_MINOR 130 /* Watchdog timer */
- #define TEMP_MINOR 131 /* Temperature Sensor */
- #define RTC_MINOR 135
---- a/include/linux/random.h
-+++ b/include/linux/random.h
-@@ -34,6 +34,30 @@
- /* Clear the entropy pool and associated counters. (Superuser only.) */
- #define RNDCLEARPOOL _IO( 'R', 0x06 )
-
-+#ifdef CONFIG_FIPS_RNG
-+
-+/* Size of seed value - equal to AES blocksize */
-+#define AES_BLOCK_SIZE_BYTES 16
-+#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
-+/* Size of AES key */
-+#define KEY_SIZE_BYTES 16
-+
-+/* ioctl() structure used by FIPS 140-2 Tests */
-+struct rand_fips_test {
-+ unsigned char key[KEY_SIZE_BYTES]; /* Input */
-+ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char result[SEED_SIZE_BYTES]; /* Output */
-+};
-+
-+/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
-+#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
-+
-+/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
-+#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
-+
-+#endif /* #ifdef CONFIG_FIPS_RNG */
-+
- struct rand_pool_info {
- int entropy_count;
- int buf_size;
-@@ -50,6 +74,10 @@ extern void add_input_randomness(unsigne
- unsigned int value);
- extern void add_interrupt_randomness(int irq);
-
-+extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
-+extern int random_input_wait(void);
-+#define HAS_RANDOM_INPUT_WAIT 1
-+
- extern void get_random_bytes(void *buf, int nbytes);
- void generate_random_uuid(unsigned char uuid_out[16]);
-
--- /dev/null
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+ * unsigned int value);
+ * void add_interrupt_randomness(int irq);
+ *
++ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ * int random_input_wait(void);
++ *
+ * add_input_randomness() uses the input layer interrupt timing, as well as
+ * the event type information from the hardware.
+ *
+@@ -140,6 +143,13 @@
+ * a better measure, since the timing of the disk interrupts are more
+ * unpredictable.
+ *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+ * All of these routines try to estimate how many bits of randomness a
+ * particular randomness source. They do this by keeping track of the
+ * first and second order deltas of the event timings.
+@@ -714,6 +724,61 @@ void add_disk_randomness(struct gendisk
+ }
+ #endif
+
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++ mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++ credit_entropy_bits(&input_pool, ent_count);
++
++ DEBUG_ENT("crediting %d bits => %d\n",
++ ent_count, input_pool.entropy_count);
++ /*
++ * Wake up waiting processes if we have enough
++ * entropy.
++ */
++ if (input_pool.entropy_count >= random_read_wakeup_thresh)
++ wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++ int count;
++
++ wait_event_interruptible(random_write_wait,
++ input_pool.entropy_count < random_write_wakeup_thresh);
++
++ count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++ /* likely we got woken up due to a signal */
++ if (count <= 0) count = random_read_wakeup_thresh;
++
++ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++ count,
++ input_pool.entropy_count, random_write_wakeup_thresh);
++
++ return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
+ }
+ return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR 7
+ #define PC110PAD_MINOR 9
+ /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
++#define CRYPTODEV_MINOR 70 /* /dev/crypto */
+ #define WATCHDOG_MINOR 130 /* Watchdog timer */
+ #define TEMP_MINOR 131 /* Temperature Sensor */
+ #define RTC_MINOR 135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -9,6 +9,7 @@
+
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters. (Superuser only.) */
+ #define RNDCLEARPOOL _IO( 'R', 0x06 )
+
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES 16
++#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES 16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++ unsigned char key[KEY_SIZE_BYTES]; /* Input */
++ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
++ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
++ unsigned char result[SEED_SIZE_BYTES]; /* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ int entropy_count;
+ int buf_size;
+@@ -50,6 +75,10 @@ extern void add_input_randomness(unsigne
+ unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -387,6 +387,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
+++ /dev/null
---- a/crypto/ocf/cryptosoft.c
-+++ b/crypto/ocf/cryptosoft.c
-@@ -47,7 +47,7 @@
- #include <linux/mm.h>
- #include <linux/skbuff.h>
- #include <linux/random.h>
--#include <asm/scatterlist.h>
-+#include <linux/scatterlist.h>
-
- #include <cryptodev.h>
- #include <uio.h>
+++ /dev/null
---- a/crypto/ocf/random.c
-+++ b/crypto/ocf/random.c
-@@ -49,6 +49,7 @@
- #include <linux/unistd.h>
- #include <linux/poll.h>
- #include <linux/random.h>
-+#include <linux/kthread.h>
- #include <cryptodev.h>
-
- #ifdef CONFIG_OCF_FIPS
-@@ -81,7 +82,7 @@ struct random_op {
-
- static int random_proc(void *arg);
-
--static pid_t randomproc = (pid_t) -1;
-+static struct task_struct *random_task;
- static spinlock_t random_lock;
-
- /*
-@@ -141,13 +142,18 @@ crypto_rregister(
- spin_lock_irqsave(&random_lock, flags);
- list_add_tail(&rops->random_list, &random_ops);
- if (!started) {
-- randomproc = kernel_thread(random_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (randomproc < 0) {
-- ret = randomproc;
-+ struct task_struct *t;
-+
-+ t = kthread_create(random_proc, NULL, "ocf-random");
-+ if (IS_ERR(t)) {
-+ ret = PTR_ERR(t);
- printk("crypto: crypto_rregister cannot start random thread; "
- "error %d", ret);
-- } else
-+ } else {
-+ random_task = t;
-+ wake_up_process(t);
- started = 1;
-+ }
- }
- spin_unlock_irqrestore(&random_lock, flags);
-
-@@ -172,7 +178,7 @@ crypto_runregister_all(u_int32_t driveri
-
- spin_lock_irqsave(&random_lock, flags);
- if (list_empty(&random_ops) && started)
-- kill_proc(randomproc, SIGKILL, 1);
-+ send_sig(SIGKILL, random_task, 1);
- spin_unlock_irqrestore(&random_lock, flags);
- return(0);
- }
-@@ -308,7 +314,7 @@ random_proc(void *arg)
-
- bad_alloc:
- spin_lock_irq(&random_lock);
-- randomproc = (pid_t) -1;
-+ random_task = NULL;
- started = 0;
- spin_unlock_irq(&random_lock);
-
---- a/crypto/ocf/crypto.c
-+++ b/crypto/ocf/crypto.c
-@@ -74,6 +74,7 @@ __FBSDID("$FreeBSD: src/sys/opencrypto/c
- #include <linux/sched.h>
- #include <linux/spinlock.h>
- #include <linux/version.h>
-+#include <linux/kthread.h>
- #include <cryptodev.h>
-
- /*
-@@ -255,10 +256,10 @@ module_param(crypto_devallowsoft, int, 0
- MODULE_PARM_DESC(crypto_devallowsoft,
- "Enable/disable use of software crypto support");
-
--static pid_t cryptoproc = (pid_t) -1;
-+static struct task_struct *crypto_task;
- static struct completion cryptoproc_exited;
- static DECLARE_WAIT_QUEUE_HEAD(cryptoproc_wait);
--static pid_t cryptoretproc = (pid_t) -1;
-+static struct task_struct *cryptoret_task;
- static struct completion cryptoretproc_exited;
- static DECLARE_WAIT_QUEUE_HEAD(cryptoretproc_wait);
-
-@@ -1401,7 +1402,7 @@ crypto_proc(void *arg)
- wait_event_interruptible(cryptoproc_wait,
- !(list_empty(&crp_q) || crypto_all_qblocked) ||
- !(list_empty(&crp_kq) || crypto_all_kqblocked) ||
-- cryptoproc == (pid_t) -1);
-+ crypto_task == NULL);
- crp_sleep = 0;
- if (signal_pending (current)) {
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-@@ -1414,7 +1415,7 @@ crypto_proc(void *arg)
- }
- CRYPTO_Q_LOCK();
- dprintk("%s - awake\n", __FUNCTION__);
-- if (cryptoproc == (pid_t) -1)
-+ if (crypto_task == NULL)
- break;
- cryptostats.cs_intrs++;
- }
-@@ -1470,7 +1471,7 @@ crypto_ret_proc(void *arg)
- dprintk("%s - sleeping\n", __FUNCTION__);
- CRYPTO_RETQ_UNLOCK();
- wait_event_interruptible(cryptoretproc_wait,
-- cryptoretproc == (pid_t) -1 ||
-+ cryptoret_task == NULL ||
- !list_empty(&crp_ret_q) ||
- !list_empty(&crp_ret_kq));
- if (signal_pending (current)) {
-@@ -1484,7 +1485,7 @@ crypto_ret_proc(void *arg)
- }
- CRYPTO_RETQ_LOCK();
- dprintk("%s - awake\n", __FUNCTION__);
-- if (cryptoretproc == (pid_t) -1) {
-+ if (cryptoret_task == NULL) {
- dprintk("%s - EXITING!\n", __FUNCTION__);
- break;
- }
-@@ -1597,6 +1598,7 @@ DB_SHOW_COMMAND(kcrypto, db_show_kcrypto
- static int
- crypto_init(void)
- {
-+ struct task_struct *t;
- int error;
-
- dprintk("%s(0x%x)\n", __FUNCTION__, (int) crypto_init);
-@@ -1643,23 +1645,27 @@ crypto_init(void)
- init_completion(&cryptoproc_exited);
- init_completion(&cryptoretproc_exited);
-
-- cryptoproc = 0; /* to avoid race condition where proc runs first */
-- cryptoproc = kernel_thread(crypto_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (cryptoproc < 0) {
-- error = cryptoproc;
-+ crypto_task = NULL; /* to avoid race condition where proc runs first */
-+ t = kthread_create(crypto_proc, NULL, "ocf-crypto");
-+ if (IS_ERR(t)) {
-+ error = PTR_ERR(t);
- printk("crypto: crypto_init cannot start crypto thread; error %d",
- error);
- goto bad;
- }
-+ wake_up_process(t);
-+ crypto_task = t;
-
-- cryptoretproc = 0; /* to avoid race condition where proc runs first */
-- cryptoretproc = kernel_thread(crypto_ret_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (cryptoretproc < 0) {
-- error = cryptoretproc;
-+ cryptoret_task = NULL; /* to avoid race condition where proc runs first */
-+ t = kthread_create(crypto_ret_proc, NULL, "ocf-cryptoret");
-+ if (IS_ERR(t)) {
-+ error = PTR_ERR(t);
- printk("crypto: crypto_init cannot start cryptoret thread; error %d",
- error);
- goto bad;
- }
-+ wake_up_process(t);
-+ cryptoret_task = t;
-
- return 0;
- bad:
-@@ -1671,7 +1677,7 @@ bad:
- static void
- crypto_exit(void)
- {
-- pid_t p;
-+ struct task_struct *t;
- unsigned long d_flags;
-
- dprintk("%s()\n", __FUNCTION__);
-@@ -1681,18 +1687,18 @@ crypto_exit(void)
- */
-
- CRYPTO_DRIVER_LOCK();
-- p = cryptoproc;
-- cryptoproc = (pid_t) -1;
-- kill_proc(p, SIGTERM, 1);
-+ t = crypto_task;
-+ crypto_task = NULL;
-+ send_sig(SIGTERM, t, 1);
- wake_up_interruptible(&cryptoproc_wait);
- CRYPTO_DRIVER_UNLOCK();
-
- wait_for_completion(&cryptoproc_exited);
-
- CRYPTO_DRIVER_LOCK();
-- p = cryptoretproc;
-- cryptoretproc = (pid_t) -1;
-- kill_proc(p, SIGTERM, 1);
-+ t = cryptoret_task;
-+ cryptoret_task = NULL;
-+ send_sig(SIGTERM, t, 1);
- wake_up_interruptible(&cryptoretproc_wait);
- CRYPTO_DRIVER_UNLOCK();
-
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
-@@ -823,6 +823,8 @@ config CRYPTO_ANSI_CPRNG
- ANSI X9.31 A.2.4. Not this option must be enabled if CRYPTO_FIPS
- is selected
-
-+source "crypto/ocf/Kconfig"
-+
+@@ -826,3 +826,6 @@ config CRYPTO_ANSI_CPRNG
source "drivers/crypto/Kconfig"
endif # if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
--- a/crypto/Makefile
+++ b/crypto/Makefile
-@@ -86,6 +86,11 @@ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+@@ -85,6 +85,8 @@ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_
+ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
obj-$(CONFIG_CRYPTO_GHASH) += ghash-generic.o
- #
-+# OCF
-+#
+obj-$(CONFIG_OCF_OCF) += ocf/
+
-+#
+ #
# generic algorithms and the async_tx api
#
- obj-$(CONFIG_XOR_BLOCKS) += xor.o
+++ /dev/null
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -129,6 +129,9 @@
- * unsigned int value);
- * void add_interrupt_randomness(int irq);
- *
-+ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+ * int random_input_wait(void);
-+ *
- * add_input_randomness() uses the input layer interrupt timing, as well as
- * the event type information from the hardware.
- *
-@@ -140,6 +143,13 @@
- * a better measure, since the timing of the disk interrupts are more
- * unpredictable.
- *
-+ * random_input_words() just provides a raw block of entropy to the input
-+ * pool, such as from a hardware entropy generator.
-+ *
-+ * random_input_wait() suspends the caller until such time as the
-+ * entropy pool falls below the write threshold, and returns a count of how
-+ * much entropy (in bits) is needed to sustain the pool.
-+ *
- * All of these routines try to estimate how many bits of randomness a
- * particular randomness source. They do this by keeping track of the
- * first and second order deltas of the event timings.
-@@ -714,6 +724,61 @@ void add_disk_randomness(struct gendisk
- }
- #endif
-
-+/*
-+ * random_input_words - add bulk entropy to pool
-+ *
-+ * @buf: buffer to add
-+ * @wordcount: number of __u32 words to add
-+ * @ent_count: total amount of entropy (in bits) to credit
-+ *
-+ * this provides bulk input of entropy to the input pool
-+ *
-+ */
-+void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+{
-+ mix_pool_bytes(&input_pool, buf, wordcount*4);
-+
-+ credit_entropy_bits(&input_pool, ent_count);
-+
-+ DEBUG_ENT("crediting %d bits => %d\n",
-+ ent_count, input_pool.entropy_count);
-+ /*
-+ * Wake up waiting processes if we have enough
-+ * entropy.
-+ */
-+ if (input_pool.entropy_count >= random_read_wakeup_thresh)
-+ wake_up_interruptible(&random_read_wait);
-+}
-+EXPORT_SYMBOL(random_input_words);
-+
-+/*
-+ * random_input_wait - wait until random needs entropy
-+ *
-+ * this function sleeps until the /dev/random subsystem actually
-+ * needs more entropy, and then return the amount of entropy
-+ * that it would be nice to have added to the system.
-+ */
-+int random_input_wait(void)
-+{
-+ int count;
-+
-+ wait_event_interruptible(random_write_wait,
-+ input_pool.entropy_count < random_write_wakeup_thresh);
-+
-+ count = random_write_wakeup_thresh - input_pool.entropy_count;
-+
-+ /* likely we got woken up due to a signal */
-+ if (count <= 0) count = random_read_wakeup_thresh;
-+
-+ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
-+ count,
-+ input_pool.entropy_count, random_write_wakeup_thresh);
-+
-+ return count;
-+}
-+EXPORT_SYMBOL(random_input_wait);
-+
-+
- #define EXTRACT_SIZE 10
-
- /*********************************************************************
---- a/fs/fcntl.c
-+++ b/fs/fcntl.c
-@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
- }
- return ret;
- }
-+EXPORT_SYMBOL(sys_dup);
-
- #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
-
---- a/include/linux/miscdevice.h
-+++ b/include/linux/miscdevice.h
-@@ -12,6 +12,7 @@
- #define APOLLO_MOUSE_MINOR 7
- #define PC110PAD_MINOR 9
- /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
-+#define CRYPTODEV_MINOR 70 /* /dev/crypto */
- #define WATCHDOG_MINOR 130 /* Watchdog timer */
- #define TEMP_MINOR 131 /* Temperature Sensor */
- #define RTC_MINOR 135
---- a/include/linux/random.h
-+++ b/include/linux/random.h
-@@ -34,6 +34,30 @@
- /* Clear the entropy pool and associated counters. (Superuser only.) */
- #define RNDCLEARPOOL _IO( 'R', 0x06 )
-
-+#ifdef CONFIG_FIPS_RNG
-+
-+/* Size of seed value - equal to AES blocksize */
-+#define AES_BLOCK_SIZE_BYTES 16
-+#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
-+/* Size of AES key */
-+#define KEY_SIZE_BYTES 16
-+
-+/* ioctl() structure used by FIPS 140-2 Tests */
-+struct rand_fips_test {
-+ unsigned char key[KEY_SIZE_BYTES]; /* Input */
-+ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char result[SEED_SIZE_BYTES]; /* Output */
-+};
-+
-+/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
-+#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
-+
-+/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
-+#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
-+
-+#endif /* #ifdef CONFIG_FIPS_RNG */
-+
- struct rand_pool_info {
- int entropy_count;
- int buf_size;
-@@ -50,6 +74,10 @@ extern void add_input_randomness(unsigne
- unsigned int value);
- extern void add_interrupt_randomness(int irq);
-
-+extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
-+extern int random_input_wait(void);
-+#define HAS_RANDOM_INPUT_WAIT 1
-+
- extern void get_random_bytes(void *buf, int nbytes);
- void generate_random_uuid(unsigned char uuid_out[16]);
-
--- /dev/null
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+ * unsigned int value);
+ * void add_interrupt_randomness(int irq);
+ *
++ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ * int random_input_wait(void);
++ *
+ * add_input_randomness() uses the input layer interrupt timing, as well as
+ * the event type information from the hardware.
+ *
+@@ -140,6 +143,13 @@
+ * a better measure, since the timing of the disk interrupts are more
+ * unpredictable.
+ *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+ * All of these routines try to estimate how many bits of randomness a
+ * particular randomness source. They do this by keeping track of the
+ * first and second order deltas of the event timings.
+@@ -714,6 +724,61 @@ void add_disk_randomness(struct gendisk
+ }
+ #endif
+
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++ mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++ credit_entropy_bits(&input_pool, ent_count);
++
++ DEBUG_ENT("crediting %d bits => %d\n",
++ ent_count, input_pool.entropy_count);
++ /*
++ * Wake up waiting processes if we have enough
++ * entropy.
++ */
++ if (input_pool.entropy_count >= random_read_wakeup_thresh)
++ wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++ int count;
++
++ wait_event_interruptible(random_write_wait,
++ input_pool.entropy_count < random_write_wakeup_thresh);
++
++ count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++ /* likely we got woken up due to a signal */
++ if (count <= 0) count = random_read_wakeup_thresh;
++
++ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++ count,
++ input_pool.entropy_count, random_write_wakeup_thresh);
++
++ return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
+ }
+ return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR 7
+ #define PC110PAD_MINOR 9
+ /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
++#define CRYPTODEV_MINOR 70 /* /dev/crypto */
+ #define WATCHDOG_MINOR 130 /* Watchdog timer */
+ #define TEMP_MINOR 131 /* Temperature Sensor */
+ #define RTC_MINOR 135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -9,6 +9,7 @@
+
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters. (Superuser only.) */
+ #define RNDCLEARPOOL _IO( 'R', 0x06 )
+
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES 16
++#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES 16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++ unsigned char key[KEY_SIZE_BYTES]; /* Input */
++ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
++ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
++ unsigned char result[SEED_SIZE_BYTES]; /* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ int entropy_count;
+ int buf_size;
+@@ -50,6 +75,10 @@ extern void add_input_randomness(unsigne
+ unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -387,6 +387,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
+++ /dev/null
---- a/crypto/ocf/cryptosoft.c
-+++ b/crypto/ocf/cryptosoft.c
-@@ -47,7 +47,7 @@
- #include <linux/mm.h>
- #include <linux/skbuff.h>
- #include <linux/random.h>
--#include <asm/scatterlist.h>
-+#include <linux/scatterlist.h>
-
- #include <cryptodev.h>
- #include <uio.h>
+++ /dev/null
---- a/crypto/ocf/random.c
-+++ b/crypto/ocf/random.c
-@@ -49,6 +49,7 @@
- #include <linux/unistd.h>
- #include <linux/poll.h>
- #include <linux/random.h>
-+#include <linux/kthread.h>
- #include <cryptodev.h>
-
- #ifdef CONFIG_OCF_FIPS
-@@ -81,7 +82,7 @@ struct random_op {
-
- static int random_proc(void *arg);
-
--static pid_t randomproc = (pid_t) -1;
-+static struct task_struct *random_task;
- static spinlock_t random_lock;
-
- /*
-@@ -141,13 +142,18 @@ crypto_rregister(
- spin_lock_irqsave(&random_lock, flags);
- list_add_tail(&rops->random_list, &random_ops);
- if (!started) {
-- randomproc = kernel_thread(random_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (randomproc < 0) {
-- ret = randomproc;
-+ struct task_struct *t;
-+
-+ t = kthread_create(random_proc, NULL, "ocf-random");
-+ if (IS_ERR(t)) {
-+ ret = PTR_ERR(t);
- printk("crypto: crypto_rregister cannot start random thread; "
- "error %d", ret);
-- } else
-+ } else {
-+ random_task = t;
-+ wake_up_process(t);
- started = 1;
-+ }
- }
- spin_unlock_irqrestore(&random_lock, flags);
-
-@@ -172,7 +178,7 @@ crypto_runregister_all(u_int32_t driveri
-
- spin_lock_irqsave(&random_lock, flags);
- if (list_empty(&random_ops) && started)
-- kill_proc(randomproc, SIGKILL, 1);
-+ send_sig(SIGKILL, random_task, 1);
- spin_unlock_irqrestore(&random_lock, flags);
- return(0);
- }
-@@ -308,7 +314,7 @@ random_proc(void *arg)
-
- bad_alloc:
- spin_lock_irq(&random_lock);
-- randomproc = (pid_t) -1;
-+ random_task = NULL;
- started = 0;
- spin_unlock_irq(&random_lock);
-
---- a/crypto/ocf/crypto.c
-+++ b/crypto/ocf/crypto.c
-@@ -74,6 +74,7 @@ __FBSDID("$FreeBSD: src/sys/opencrypto/c
- #include <linux/sched.h>
- #include <linux/spinlock.h>
- #include <linux/version.h>
-+#include <linux/kthread.h>
- #include <cryptodev.h>
-
- /*
-@@ -255,10 +256,10 @@ module_param(crypto_devallowsoft, int, 0
- MODULE_PARM_DESC(crypto_devallowsoft,
- "Enable/disable use of software crypto support");
-
--static pid_t cryptoproc = (pid_t) -1;
-+static struct task_struct *crypto_task;
- static struct completion cryptoproc_exited;
- static DECLARE_WAIT_QUEUE_HEAD(cryptoproc_wait);
--static pid_t cryptoretproc = (pid_t) -1;
-+static struct task_struct *cryptoret_task;
- static struct completion cryptoretproc_exited;
- static DECLARE_WAIT_QUEUE_HEAD(cryptoretproc_wait);
-
-@@ -1401,7 +1402,7 @@ crypto_proc(void *arg)
- wait_event_interruptible(cryptoproc_wait,
- !(list_empty(&crp_q) || crypto_all_qblocked) ||
- !(list_empty(&crp_kq) || crypto_all_kqblocked) ||
-- cryptoproc == (pid_t) -1);
-+ crypto_task == NULL);
- crp_sleep = 0;
- if (signal_pending (current)) {
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-@@ -1414,7 +1415,7 @@ crypto_proc(void *arg)
- }
- CRYPTO_Q_LOCK();
- dprintk("%s - awake\n", __FUNCTION__);
-- if (cryptoproc == (pid_t) -1)
-+ if (crypto_task == NULL)
- break;
- cryptostats.cs_intrs++;
- }
-@@ -1470,7 +1471,7 @@ crypto_ret_proc(void *arg)
- dprintk("%s - sleeping\n", __FUNCTION__);
- CRYPTO_RETQ_UNLOCK();
- wait_event_interruptible(cryptoretproc_wait,
-- cryptoretproc == (pid_t) -1 ||
-+ cryptoret_task == NULL ||
- !list_empty(&crp_ret_q) ||
- !list_empty(&crp_ret_kq));
- if (signal_pending (current)) {
-@@ -1484,7 +1485,7 @@ crypto_ret_proc(void *arg)
- }
- CRYPTO_RETQ_LOCK();
- dprintk("%s - awake\n", __FUNCTION__);
-- if (cryptoretproc == (pid_t) -1) {
-+ if (cryptoret_task == NULL) {
- dprintk("%s - EXITING!\n", __FUNCTION__);
- break;
- }
-@@ -1597,6 +1598,7 @@ DB_SHOW_COMMAND(kcrypto, db_show_kcrypto
- static int
- crypto_init(void)
- {
-+ struct task_struct *t;
- int error;
-
- dprintk("%s(0x%x)\n", __FUNCTION__, (int) crypto_init);
-@@ -1643,23 +1645,27 @@ crypto_init(void)
- init_completion(&cryptoproc_exited);
- init_completion(&cryptoretproc_exited);
-
-- cryptoproc = 0; /* to avoid race condition where proc runs first */
-- cryptoproc = kernel_thread(crypto_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (cryptoproc < 0) {
-- error = cryptoproc;
-+ crypto_task = NULL; /* to avoid race condition where proc runs first */
-+ t = kthread_create(crypto_proc, NULL, "ocf-crypto");
-+ if (IS_ERR(t)) {
-+ error = PTR_ERR(t);
- printk("crypto: crypto_init cannot start crypto thread; error %d",
- error);
- goto bad;
- }
-+ wake_up_process(t);
-+ crypto_task = t;
-
-- cryptoretproc = 0; /* to avoid race condition where proc runs first */
-- cryptoretproc = kernel_thread(crypto_ret_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (cryptoretproc < 0) {
-- error = cryptoretproc;
-+ cryptoret_task = NULL; /* to avoid race condition where proc runs first */
-+ t = kthread_create(crypto_ret_proc, NULL, "ocf-cryptoret");
-+ if (IS_ERR(t)) {
-+ error = PTR_ERR(t);
- printk("crypto: crypto_init cannot start cryptoret thread; error %d",
- error);
- goto bad;
- }
-+ wake_up_process(t);
-+ cryptoret_task = t;
-
- return 0;
- bad:
-@@ -1671,7 +1677,7 @@ bad:
- static void
- crypto_exit(void)
- {
-- pid_t p;
-+ struct task_struct *t;
- unsigned long d_flags;
-
- dprintk("%s()\n", __FUNCTION__);
-@@ -1681,18 +1687,18 @@ crypto_exit(void)
- */
-
- CRYPTO_DRIVER_LOCK();
-- p = cryptoproc;
-- cryptoproc = (pid_t) -1;
-- kill_proc(p, SIGTERM, 1);
-+ t = crypto_task;
-+ crypto_task = NULL;
-+ send_sig(SIGTERM, t, 1);
- wake_up_interruptible(&cryptoproc_wait);
- CRYPTO_DRIVER_UNLOCK();
-
- wait_for_completion(&cryptoproc_exited);
-
- CRYPTO_DRIVER_LOCK();
-- p = cryptoretproc;
-- cryptoretproc = (pid_t) -1;
-- kill_proc(p, SIGTERM, 1);
-+ t = cryptoret_task;
-+ cryptoret_task = NULL;
-+ send_sig(SIGTERM, t, 1);
- wake_up_interruptible(&cryptoretproc_wait);
- CRYPTO_DRIVER_UNLOCK();
-
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
-@@ -833,6 +833,8 @@ config CRYPTO_ANSI_CPRNG
- ANSI X9.31 A.2.4. Note that this option must be enabled if
- CRYPTO_FIPS is selected
-
-+source "crypto/ocf/Kconfig"
-+
+@@ -836,3 +836,6 @@ config CRYPTO_ANSI_CPRNG
source "drivers/crypto/Kconfig"
endif # if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
--- a/crypto/Makefile
+++ b/crypto/Makefile
-@@ -87,6 +87,11 @@ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+@@ -86,6 +86,8 @@ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_
+ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
obj-$(CONFIG_CRYPTO_GHASH) += ghash-generic.o
- #
-+# OCF
-+#
+obj-$(CONFIG_OCF_OCF) += ocf/
+
-+#
+ #
# generic algorithms and the async_tx api
#
- obj-$(CONFIG_XOR_BLOCKS) += xor.o
+++ /dev/null
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -129,6 +129,9 @@
- * unsigned int value);
- * void add_interrupt_randomness(int irq);
- *
-+ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+ * int random_input_wait(void);
-+ *
- * add_input_randomness() uses the input layer interrupt timing, as well as
- * the event type information from the hardware.
- *
-@@ -140,6 +143,13 @@
- * a better measure, since the timing of the disk interrupts are more
- * unpredictable.
- *
-+ * random_input_words() just provides a raw block of entropy to the input
-+ * pool, such as from a hardware entropy generator.
-+ *
-+ * random_input_wait() suspends the caller until such time as the
-+ * entropy pool falls below the write threshold, and returns a count of how
-+ * much entropy (in bits) is needed to sustain the pool.
-+ *
- * All of these routines try to estimate how many bits of randomness a
- * particular randomness source. They do this by keeping track of the
- * first and second order deltas of the event timings.
-@@ -714,6 +724,61 @@ void add_disk_randomness(struct gendisk
- }
- #endif
-
-+/*
-+ * random_input_words - add bulk entropy to pool
-+ *
-+ * @buf: buffer to add
-+ * @wordcount: number of __u32 words to add
-+ * @ent_count: total amount of entropy (in bits) to credit
-+ *
-+ * this provides bulk input of entropy to the input pool
-+ *
-+ */
-+void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
-+{
-+ mix_pool_bytes(&input_pool, buf, wordcount*4);
-+
-+ credit_entropy_bits(&input_pool, ent_count);
-+
-+ DEBUG_ENT("crediting %d bits => %d\n",
-+ ent_count, input_pool.entropy_count);
-+ /*
-+ * Wake up waiting processes if we have enough
-+ * entropy.
-+ */
-+ if (input_pool.entropy_count >= random_read_wakeup_thresh)
-+ wake_up_interruptible(&random_read_wait);
-+}
-+EXPORT_SYMBOL(random_input_words);
-+
-+/*
-+ * random_input_wait - wait until random needs entropy
-+ *
-+ * this function sleeps until the /dev/random subsystem actually
-+ * needs more entropy, and then return the amount of entropy
-+ * that it would be nice to have added to the system.
-+ */
-+int random_input_wait(void)
-+{
-+ int count;
-+
-+ wait_event_interruptible(random_write_wait,
-+ input_pool.entropy_count < random_write_wakeup_thresh);
-+
-+ count = random_write_wakeup_thresh - input_pool.entropy_count;
-+
-+ /* likely we got woken up due to a signal */
-+ if (count <= 0) count = random_read_wakeup_thresh;
-+
-+ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
-+ count,
-+ input_pool.entropy_count, random_write_wakeup_thresh);
-+
-+ return count;
-+}
-+EXPORT_SYMBOL(random_input_wait);
-+
-+
- #define EXTRACT_SIZE 10
-
- /*********************************************************************
---- a/fs/fcntl.c
-+++ b/fs/fcntl.c
-@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
- }
- return ret;
- }
-+EXPORT_SYMBOL(sys_dup);
-
- #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
-
---- a/include/linux/miscdevice.h
-+++ b/include/linux/miscdevice.h
-@@ -12,6 +12,7 @@
- #define APOLLO_MOUSE_MINOR 7
- #define PC110PAD_MINOR 9
- /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
-+#define CRYPTODEV_MINOR 70 /* /dev/crypto */
- #define WATCHDOG_MINOR 130 /* Watchdog timer */
- #define TEMP_MINOR 131 /* Temperature Sensor */
- #define RTC_MINOR 135
---- a/include/linux/random.h
-+++ b/include/linux/random.h
-@@ -34,6 +34,30 @@
- /* Clear the entropy pool and associated counters. (Superuser only.) */
- #define RNDCLEARPOOL _IO( 'R', 0x06 )
-
-+#ifdef CONFIG_FIPS_RNG
-+
-+/* Size of seed value - equal to AES blocksize */
-+#define AES_BLOCK_SIZE_BYTES 16
-+#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
-+/* Size of AES key */
-+#define KEY_SIZE_BYTES 16
-+
-+/* ioctl() structure used by FIPS 140-2 Tests */
-+struct rand_fips_test {
-+ unsigned char key[KEY_SIZE_BYTES]; /* Input */
-+ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
-+ unsigned char result[SEED_SIZE_BYTES]; /* Output */
-+};
-+
-+/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
-+#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
-+
-+/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
-+#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
-+
-+#endif /* #ifdef CONFIG_FIPS_RNG */
-+
- struct rand_pool_info {
- int entropy_count;
- int buf_size;
-@@ -50,6 +74,10 @@ extern void add_input_randomness(unsigne
- unsigned int value);
- extern void add_interrupt_randomness(int irq);
-
-+extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
-+extern int random_input_wait(void);
-+#define HAS_RANDOM_INPUT_WAIT 1
-+
- extern void get_random_bytes(void *buf, int nbytes);
- void generate_random_uuid(unsigned char uuid_out[16]);
-
--- /dev/null
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+ * unsigned int value);
+ * void add_interrupt_randomness(int irq);
+ *
++ * void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ * int random_input_wait(void);
++ *
+ * add_input_randomness() uses the input layer interrupt timing, as well as
+ * the event type information from the hardware.
+ *
+@@ -140,6 +143,13 @@
+ * a better measure, since the timing of the disk interrupts are more
+ * unpredictable.
+ *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+ * All of these routines try to estimate how many bits of randomness a
+ * particular randomness source. They do this by keeping track of the
+ * first and second order deltas of the event timings.
+@@ -714,6 +724,61 @@ void add_disk_randomness(struct gendisk
+ }
+ #endif
+
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++ mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++ credit_entropy_bits(&input_pool, ent_count);
++
++ DEBUG_ENT("crediting %d bits => %d\n",
++ ent_count, input_pool.entropy_count);
++ /*
++ * Wake up waiting processes if we have enough
++ * entropy.
++ */
++ if (input_pool.entropy_count >= random_read_wakeup_thresh)
++ wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++ int count;
++
++ wait_event_interruptible(random_write_wait,
++ input_pool.entropy_count < random_write_wakeup_thresh);
++
++ count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++ /* likely we got woken up due to a signal */
++ if (count <= 0) count = random_read_wakeup_thresh;
++
++ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++ count,
++ input_pool.entropy_count, random_write_wakeup_thresh);
++
++ return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
+ }
+ return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR 7
+ #define PC110PAD_MINOR 9
+ /*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
++#define CRYPTODEV_MINOR 70 /* /dev/crypto */
+ #define WATCHDOG_MINOR 130 /* Watchdog timer */
+ #define TEMP_MINOR 131 /* Temperature Sensor */
+ #define RTC_MINOR 135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -9,6 +9,7 @@
+
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters. (Superuser only.) */
+ #define RNDCLEARPOOL _IO( 'R', 0x06 )
+
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES 16
++#define SEED_SIZE_BYTES AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES 16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++ unsigned char key[KEY_SIZE_BYTES]; /* Input */
++ unsigned char datetime[SEED_SIZE_BYTES]; /* Input */
++ unsigned char seed[SEED_SIZE_BYTES]; /* Input */
++ unsigned char result[SEED_SIZE_BYTES]; /* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST _IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT _IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ int entropy_count;
+ int buf_size;
+@@ -50,6 +75,10 @@ extern void add_input_randomness(unsigne
+ unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -389,6 +389,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
+++ /dev/null
---- a/crypto/ocf/cryptosoft.c
-+++ b/crypto/ocf/cryptosoft.c
-@@ -47,7 +47,7 @@
- #include <linux/mm.h>
- #include <linux/skbuff.h>
- #include <linux/random.h>
--#include <asm/scatterlist.h>
-+#include <linux/scatterlist.h>
-
- #include <cryptodev.h>
- #include <uio.h>
+++ /dev/null
---- a/crypto/ocf/random.c
-+++ b/crypto/ocf/random.c
-@@ -49,6 +49,7 @@
- #include <linux/unistd.h>
- #include <linux/poll.h>
- #include <linux/random.h>
-+#include <linux/kthread.h>
- #include <cryptodev.h>
-
- #ifdef CONFIG_OCF_FIPS
-@@ -81,7 +82,7 @@ struct random_op {
-
- static int random_proc(void *arg);
-
--static pid_t randomproc = (pid_t) -1;
-+static struct task_struct *random_task;
- static spinlock_t random_lock;
-
- /*
-@@ -141,13 +142,18 @@ crypto_rregister(
- spin_lock_irqsave(&random_lock, flags);
- list_add_tail(&rops->random_list, &random_ops);
- if (!started) {
-- randomproc = kernel_thread(random_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (randomproc < 0) {
-- ret = randomproc;
-+ struct task_struct *t;
-+
-+ t = kthread_create(random_proc, NULL, "ocf-random");
-+ if (IS_ERR(t)) {
-+ ret = PTR_ERR(t);
- printk("crypto: crypto_rregister cannot start random thread; "
- "error %d", ret);
-- } else
-+ } else {
-+ random_task = t;
-+ wake_up_process(t);
- started = 1;
-+ }
- }
- spin_unlock_irqrestore(&random_lock, flags);
-
-@@ -172,7 +178,7 @@ crypto_runregister_all(u_int32_t driveri
-
- spin_lock_irqsave(&random_lock, flags);
- if (list_empty(&random_ops) && started)
-- kill_proc(randomproc, SIGKILL, 1);
-+ send_sig(SIGKILL, random_task, 1);
- spin_unlock_irqrestore(&random_lock, flags);
- return(0);
- }
-@@ -308,7 +314,7 @@ random_proc(void *arg)
-
- bad_alloc:
- spin_lock_irq(&random_lock);
-- randomproc = (pid_t) -1;
-+ random_task = NULL;
- started = 0;
- spin_unlock_irq(&random_lock);
-
---- a/crypto/ocf/crypto.c
-+++ b/crypto/ocf/crypto.c
-@@ -74,6 +74,7 @@ __FBSDID("$FreeBSD: src/sys/opencrypto/c
- #include <linux/sched.h>
- #include <linux/spinlock.h>
- #include <linux/version.h>
-+#include <linux/kthread.h>
- #include <cryptodev.h>
-
- /*
-@@ -255,10 +256,10 @@ module_param(crypto_devallowsoft, int, 0
- MODULE_PARM_DESC(crypto_devallowsoft,
- "Enable/disable use of software crypto support");
-
--static pid_t cryptoproc = (pid_t) -1;
-+static struct task_struct *crypto_task;
- static struct completion cryptoproc_exited;
- static DECLARE_WAIT_QUEUE_HEAD(cryptoproc_wait);
--static pid_t cryptoretproc = (pid_t) -1;
-+static struct task_struct *cryptoret_task;
- static struct completion cryptoretproc_exited;
- static DECLARE_WAIT_QUEUE_HEAD(cryptoretproc_wait);
-
-@@ -1401,7 +1402,7 @@ crypto_proc(void *arg)
- wait_event_interruptible(cryptoproc_wait,
- !(list_empty(&crp_q) || crypto_all_qblocked) ||
- !(list_empty(&crp_kq) || crypto_all_kqblocked) ||
-- cryptoproc == (pid_t) -1);
-+ crypto_task == NULL);
- crp_sleep = 0;
- if (signal_pending (current)) {
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-@@ -1414,7 +1415,7 @@ crypto_proc(void *arg)
- }
- CRYPTO_Q_LOCK();
- dprintk("%s - awake\n", __FUNCTION__);
-- if (cryptoproc == (pid_t) -1)
-+ if (crypto_task == NULL)
- break;
- cryptostats.cs_intrs++;
- }
-@@ -1470,7 +1471,7 @@ crypto_ret_proc(void *arg)
- dprintk("%s - sleeping\n", __FUNCTION__);
- CRYPTO_RETQ_UNLOCK();
- wait_event_interruptible(cryptoretproc_wait,
-- cryptoretproc == (pid_t) -1 ||
-+ cryptoret_task == NULL ||
- !list_empty(&crp_ret_q) ||
- !list_empty(&crp_ret_kq));
- if (signal_pending (current)) {
-@@ -1484,7 +1485,7 @@ crypto_ret_proc(void *arg)
- }
- CRYPTO_RETQ_LOCK();
- dprintk("%s - awake\n", __FUNCTION__);
-- if (cryptoretproc == (pid_t) -1) {
-+ if (cryptoret_task == NULL) {
- dprintk("%s - EXITING!\n", __FUNCTION__);
- break;
- }
-@@ -1597,6 +1598,7 @@ DB_SHOW_COMMAND(kcrypto, db_show_kcrypto
- static int
- crypto_init(void)
- {
-+ struct task_struct *t;
- int error;
-
- dprintk("%s(0x%x)\n", __FUNCTION__, (int) crypto_init);
-@@ -1643,23 +1645,27 @@ crypto_init(void)
- init_completion(&cryptoproc_exited);
- init_completion(&cryptoretproc_exited);
-
-- cryptoproc = 0; /* to avoid race condition where proc runs first */
-- cryptoproc = kernel_thread(crypto_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (cryptoproc < 0) {
-- error = cryptoproc;
-+ crypto_task = NULL; /* to avoid race condition where proc runs first */
-+ t = kthread_create(crypto_proc, NULL, "ocf-crypto");
-+ if (IS_ERR(t)) {
-+ error = PTR_ERR(t);
- printk("crypto: crypto_init cannot start crypto thread; error %d",
- error);
- goto bad;
- }
-+ wake_up_process(t);
-+ crypto_task = t;
-
-- cryptoretproc = 0; /* to avoid race condition where proc runs first */
-- cryptoretproc = kernel_thread(crypto_ret_proc, NULL, CLONE_FS|CLONE_FILES);
-- if (cryptoretproc < 0) {
-- error = cryptoretproc;
-+ cryptoret_task = NULL; /* to avoid race condition where proc runs first */
-+ t = kthread_create(crypto_ret_proc, NULL, "ocf-cryptoret");
-+ if (IS_ERR(t)) {
-+ error = PTR_ERR(t);
- printk("crypto: crypto_init cannot start cryptoret thread; error %d",
- error);
- goto bad;
- }
-+ wake_up_process(t);
-+ cryptoret_task = t;
-
- return 0;
- bad:
-@@ -1671,7 +1677,7 @@ bad:
- static void
- crypto_exit(void)
- {
-- pid_t p;
-+ struct task_struct *t;
- unsigned long d_flags;
-
- dprintk("%s()\n", __FUNCTION__);
-@@ -1681,18 +1687,18 @@ crypto_exit(void)
- */
-
- CRYPTO_DRIVER_LOCK();
-- p = cryptoproc;
-- cryptoproc = (pid_t) -1;
-- kill_proc(p, SIGTERM, 1);
-+ t = crypto_task;
-+ crypto_task = NULL;
-+ send_sig(SIGTERM, t, 1);
- wake_up_interruptible(&cryptoproc_wait);
- CRYPTO_DRIVER_UNLOCK();
-
- wait_for_completion(&cryptoproc_exited);
-
- CRYPTO_DRIVER_LOCK();
-- p = cryptoretproc;
-- cryptoretproc = (pid_t) -1;
-- kill_proc(p, SIGTERM, 1);
-+ t = cryptoret_task;
-+ cryptoret_task = NULL;
-+ send_sig(SIGTERM, t, 1);
- wake_up_interruptible(&cryptoretproc_wait);
- CRYPTO_DRIVER_UNLOCK();
-
projects / openwrt.git / commitdiff